From 8bf62ecee58360749c5f0e68bc97d5e02a6816b1 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Thu, 12 May 2005 15:29:42 -0400 Subject: [PATCH 0001/1519] [libata] C/H/S support, for older devices --- drivers/scsi/libata-core.c | 140 +++++++++++++++---- drivers/scsi/libata-scsi.c | 280 +++++++++++++++++++++++-------------- include/linux/ata.h | 14 ++ include/linux/libata.h | 6 + 4 files changed, 312 insertions(+), 128 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0b5d3a5b7eda..96355b05fe5c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -52,6 +52,7 @@ static unsigned int ata_busy_sleep (struct ata_port *ap, unsigned long tmout_pat, unsigned long tmout); +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift); @@ -1008,7 +1009,7 @@ static inline void ata_dump_id(struct ata_device *dev) static void ata_dev_identify(struct ata_port *ap, unsigned int device) { struct ata_device *dev = &ap->device[device]; - unsigned int i; + unsigned int major_version; u16 tmp; unsigned long xfer_modes; u8 status; @@ -1106,9 +1107,9 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) * common ATA, ATAPI feature tests */ - /* we require LBA and DMA support (bits 8 & 9 of word 49) */ - if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) { - printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id); + /* we require DMA support (bits 8 of word 49) */ + if (!ata_id_has_dma(dev->id)) { + printk(KERN_DEBUG "ata%u: no dma\n", ap->id); goto err_out_nosup; } @@ -1128,32 +1129,69 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) if (!ata_id_is_ata(dev->id)) /* sanity check */ goto err_out_nosup; + /* get major version */ tmp = dev->id[ATA_ID_MAJOR_VER]; - for (i = 14; i >= 1; i--) - if (tmp & (1 << i)) + for (major_version = 14; major_version >= 1; major_version--) + if (tmp & (1 << major_version)) break; - /* we require at least ATA-3 */ - if (i < 3) { - printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id); - goto err_out_nosup; - } + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (major_version < 4 || (!ata_id_has_lba(dev->id))) + ata_dev_init_params(ap, dev); + + if (ata_id_has_lba(dev->id)) { + dev->flags |= ATA_DFLAG_LBA; + + if (ata_id_has_lba48(dev->id)) { + dev->flags |= ATA_DFLAG_LBA48; + dev->n_sectors = ata_id_u64(dev->id, 100); + } else { + dev->n_sectors = ata_id_u32(dev->id, 60); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); + } else { + /* CHS */ + + /* Default translation */ + dev->cylinders = dev->id[1]; + dev->heads = dev->id[3]; + dev->sectors = dev->id[6]; + dev->n_sectors = dev->cylinders * dev->heads * dev->sectors; + + if (ata_id_current_chs_valid(dev->id)) { + /* Current CHS translation is valid. */ + dev->cylinders = dev->id[54]; + dev->heads = dev->id[55]; + dev->sectors = dev->id[56]; + + dev->n_sectors = ata_id_u32(dev->id, 57); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); - if (ata_id_has_lba48(dev->id)) { - dev->flags |= ATA_DFLAG_LBA48; - dev->n_sectors = ata_id_u64(dev->id, 100); - } else { - dev->n_sectors = ata_id_u32(dev->id, 60); } ap->host->max_cmd_len = 16; - - /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n", - ap->id, device, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - dev->flags & ATA_DFLAG_LBA48 ? " lba48" : ""); } /* ATAPI-specific feature tests */ @@ -1946,6 +1984,54 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) DPRINTK("EXIT\n"); } +/** + * ata_dev_init_params - Issue INIT DEV PARAMS command + * @ap: Port associated with device @dev + * @dev: Device to which command will be sent + * + * LOCKING: + */ + +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + int rc; + unsigned long flags; + u16 sectors = dev->id[6]; + u16 heads = dev->id[3]; + + /* Number of sectors per track 1-255. Number of heads 1-16 */ + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return; + + /* set up init dev params taskfile */ + DPRINTK("init dev params \n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + qc->tf.command = ATA_CMD_INIT_DEV_PARAMS; + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_NODATA; + qc->tf.nsect = sectors; + qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + /** * ata_sg_clean - * @qc: @@ -2736,8 +2822,12 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, ata_tf_init(ap, &qc->tf, dev->devno); - if (dev->flags & ATA_DFLAG_LBA48) - qc->tf.flags |= ATA_TFLAG_LBA48; + if (dev->flags & ATA_DFLAG_LBA) { + qc->tf.flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) + qc->tf.flags |= ATA_TFLAG_LBA48; + } } return qc; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4c96df060c3b..8b065ef0e39a 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -435,77 +435,107 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; - u64 sect = 0; - u32 n_sect = 0; + u64 block = 0; + u32 n_block = 0; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - tf->device |= ATA_LBA; if (scsicmd[0] == VERIFY) { - sect |= ((u64)scsicmd[2]) << 24; - sect |= ((u64)scsicmd[3]) << 16; - sect |= ((u64)scsicmd[4]) << 8; - sect |= ((u64)scsicmd[5]); + block |= ((u64)scsicmd[2]) << 24; + block |= ((u64)scsicmd[3]) << 16; + block |= ((u64)scsicmd[4]) << 8; + block |= ((u64)scsicmd[5]); - n_sect |= ((u32)scsicmd[7]) << 8; - n_sect |= ((u32)scsicmd[8]); + n_block |= ((u32)scsicmd[7]) << 8; + n_block |= ((u32)scsicmd[8]); } else if (scsicmd[0] == VERIFY_16) { - sect |= ((u64)scsicmd[2]) << 56; - sect |= ((u64)scsicmd[3]) << 48; - sect |= ((u64)scsicmd[4]) << 40; - sect |= ((u64)scsicmd[5]) << 32; - sect |= ((u64)scsicmd[6]) << 24; - sect |= ((u64)scsicmd[7]) << 16; - sect |= ((u64)scsicmd[8]) << 8; - sect |= ((u64)scsicmd[9]); - - n_sect |= ((u32)scsicmd[10]) << 24; - n_sect |= ((u32)scsicmd[11]) << 16; - n_sect |= ((u32)scsicmd[12]) << 8; - n_sect |= ((u32)scsicmd[13]); + block |= ((u64)scsicmd[2]) << 56; + block |= ((u64)scsicmd[3]) << 48; + block |= ((u64)scsicmd[4]) << 40; + block |= ((u64)scsicmd[5]) << 32; + block |= ((u64)scsicmd[6]) << 24; + block |= ((u64)scsicmd[7]) << 16; + block |= ((u64)scsicmd[8]) << 8; + block |= ((u64)scsicmd[9]); + + n_block |= ((u32)scsicmd[10]) << 24; + n_block |= ((u32)scsicmd[11]) << 16; + n_block |= ((u32)scsicmd[12]) << 8; + n_block |= ((u32)scsicmd[13]); } else return 1; - if (!n_sect) + if (!n_block) return 1; - if (sect >= dev_sectors) + if (block >= dev_sectors) return 1; - if ((sect + n_sect) > dev_sectors) + if ((block + n_block) > dev_sectors) return 1; if (lba48) { - if (n_sect > (64 * 1024)) + if (n_block > (64 * 1024)) return 1; } else { - if (n_sect > 256) + if (n_block > 256) return 1; } - if (lba48) { - tf->command = ATA_CMD_VERIFY_EXT; + if (lba) { + if (lba48) { + tf->command = ATA_CMD_VERIFY_EXT; - tf->hob_nsect = (n_sect >> 8) & 0xff; + tf->hob_nsect = (n_block >> 8) & 0xff; - tf->hob_lbah = (sect >> 40) & 0xff; - tf->hob_lbam = (sect >> 32) & 0xff; - tf->hob_lbal = (sect >> 24) & 0xff; - } else { - tf->command = ATA_CMD_VERIFY; + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + tf->command = ATA_CMD_VERIFY; - tf->device |= (sect >> 24) & 0xf; - } + tf->device |= (block >> 24) & 0xf; + } + + tf->nsect = n_block & 0xff; - tf->nsect = n_sect & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; - tf->lbah = (sect >> 16) & 0xff; - tf->lbam = (sect >> 8) & 0xff; - tf->lbal = sect & 0xff; + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + return 1; + + tf->command = ATA_CMD_VERIFY; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } return 0; } @@ -533,11 +563,14 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; + u64 block = 0; + u32 n_block = 0; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = qc->dev->xfer_protocol; - tf->device |= ATA_LBA; if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || scsicmd[0] == READ_16) { @@ -547,80 +580,111 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->flags |= ATA_TFLAG_WRITE; } + /* Calculate the SCSI LBA and transfer length. */ if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { - if (lba48) { - tf->hob_nsect = scsicmd[7]; - tf->hob_lbal = scsicmd[2]; - - qc->nsect = ((unsigned int)scsicmd[7] << 8) | - scsicmd[8]; - } else { - /* if we don't support LBA48 addressing, the request - * -may- be too large. */ - if ((scsicmd[2] & 0xf0) || scsicmd[7]) - return 1; - - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[2]; + block |= ((u64)scsicmd[2]) << 24; + block |= ((u64)scsicmd[3]) << 16; + block |= ((u64)scsicmd[4]) << 8; + block |= ((u64)scsicmd[5]); - qc->nsect = scsicmd[8]; - } - - tf->nsect = scsicmd[8]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[4]; - tf->lbah = scsicmd[3]; + n_block |= ((u32)scsicmd[7]) << 8; + n_block |= ((u32)scsicmd[8]); VPRINTK("ten-byte command\n"); - return 0; - } - - if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { - qc->nsect = tf->nsect = scsicmd[4]; - tf->lbal = scsicmd[3]; - tf->lbam = scsicmd[2]; - tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */ - + } else if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { + block |= ((u64)scsicmd[2]) << 8; + block |= ((u64)scsicmd[3]); + n_block |= ((u32)scsicmd[4]); + VPRINTK("six-byte command\n"); - return 0; + } else if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { + block |= ((u64)scsicmd[2]) << 56; + block |= ((u64)scsicmd[3]) << 48; + block |= ((u64)scsicmd[4]) << 40; + block |= ((u64)scsicmd[5]) << 32; + block |= ((u64)scsicmd[6]) << 24; + block |= ((u64)scsicmd[7]) << 16; + block |= ((u64)scsicmd[8]) << 8; + block |= ((u64)scsicmd[9]); + + n_block |= ((u32)scsicmd[10]) << 24; + n_block |= ((u32)scsicmd[11]) << 16; + n_block |= ((u32)scsicmd[12]) << 8; + n_block |= ((u32)scsicmd[13]); + + VPRINTK("sixteen-byte command\n"); + } else { + DPRINTK("no-byte command\n"); + return 1; } - if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { - /* rule out impossible LBAs and sector counts */ - if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11]) - return 1; + /* Check and compose ATA command */ + if (!n_block) + /* In ATA, sector count 0 means 256 or 65536 sectors, not 0 sectors. */ + return 1; + if (lba) { if (lba48) { - tf->hob_nsect = scsicmd[12]; - tf->hob_lbal = scsicmd[6]; - tf->hob_lbam = scsicmd[5]; - tf->hob_lbah = scsicmd[4]; - - qc->nsect = ((unsigned int)scsicmd[12] << 8) | - scsicmd[13]; - } else { - /* once again, filter out impossible non-zero values */ - if (scsicmd[4] || scsicmd[5] || scsicmd[12] || - (scsicmd[6] & 0xf0)) + /* The request -may- be too large for LBA48. */ + if ((block >> 48) || (n_block > 65536)) return 1; - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[6]; + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + /* LBA28 */ + + /* The request -may- be too large for LBA28. */ + if ((block >> 28) || (n_block > 256)) + return 1; - qc->nsect = scsicmd[13]; + tf->device |= (block >> 24) & 0xf; } + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; - tf->nsect = scsicmd[13]; - tf->lbal = scsicmd[9]; - tf->lbam = scsicmd[8]; - tf->lbah = scsicmd[7]; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; - VPRINTK("sixteen-byte command\n"); - return 0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if ((block >> 28) || (n_block > 256)) + return 1; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + return 1; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; } - DPRINTK("no-byte command\n"); - return 1; + return 0; } static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -1167,10 +1231,20 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, VPRINTK("ENTER\n"); - if (ata_id_has_lba48(args->id)) - n_sectors = ata_id_u64(args->id, 100); - else - n_sectors = ata_id_u32(args->id, 60); + if (ata_id_has_lba(args->id)) { + if (ata_id_has_lba48(args->id)) + n_sectors = ata_id_u64(args->id, 100); + else + n_sectors = ata_id_u32(args->id, 60); + } else { + /* CHS default translation */ + n_sectors = args->id[1] * args->id[3] * args->id[6]; + + if (ata_id_current_chs_valid(args->id)) + /* CHS current translation */ + n_sectors = ata_id_u32(args->id, 57); + } + n_sectors--; /* ATA TotalUserSectors - 1 */ tmp = n_sectors; /* note: truncates, if lba48 */ diff --git a/include/linux/ata.h b/include/linux/ata.h index f178894edd04..d8981402cd5b 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -125,6 +125,7 @@ enum { ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, ATA_CMD_VERIFY_EXT = 0x42, + ATA_CMD_INIT_DEV_PARAMS = 0x91, /* SETFEATURES stuff */ SETFEATURES_XFER = 0x03, @@ -174,6 +175,7 @@ enum { ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ + ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ }; enum ata_tf_protocols { @@ -242,6 +244,18 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) +static inline int ata_id_current_chs_valid(u16 *id) +{ + /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command + has not been issued to the device then the values of + id[54] to id[56] are vendor specific. */ + return (id[53] & 0x01) && /* Current translation valid */ + id[54] && /* cylinders in current translation */ + id[55] && /* heads in current translation */ + id[55] <= 16 && + id[56]; /* sectors in current translation */ +} + static inline int atapi_cdb_len(u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; diff --git a/include/linux/libata.h b/include/linux/libata.h index 505160ab472b..bd0df84cfd87 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -95,6 +95,7 @@ enum { ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */ ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */ ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */ + ATA_DFLAG_LBA = (1 << 3), /* device supports LBA */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -278,6 +279,11 @@ struct ata_device { u8 xfer_protocol; /* taskfile xfer protocol */ u8 read_cmd; /* opcode to use on read */ u8 write_cmd; /* opcode to use on write */ + + /* for CHS addressing */ + u16 cylinders; /* Number of cylinders */ + u16 heads; /* Number of heads */ + u16 sectors; /* Number of sectors per track */ }; struct ata_port { -- GitLab From b095518ef51c37658c58367bd19240b8a113f25c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 12 May 2005 15:45:22 -0400 Subject: [PATCH 0002/1519] [libata] ATA passthru (arbitrary ATA command execution) Authors: Brett Russ John W. Linville Andy Warner --- drivers/scsi/libata-scsi.c | 651 +++++++++++++++++++++++++++++++------ drivers/scsi/libata.h | 3 +- include/scsi/scsi.h | 3 + 3 files changed, 552 insertions(+), 105 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4c96df060c3b..22c77a113536 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -29,10 +29,13 @@ #include "scsi.h" #include #include +#include #include #include "libata.h" +#define SECTOR_SIZE 512 + typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd); static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); @@ -67,6 +70,148 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, return 0; } +/** + * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl + * @dev: Device to whom we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ + +int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[4], *argbuf = NULL; + int argsize = 0; + struct scsi_request *sreq; + + if (NULL == (void *)arg) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + sreq = scsi_allocate_request(scsidev, GFP_KERNEL); + if (!sreq) + return -EINTR; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + + if (args[3]) { + argsize = SECTOR_SIZE * args[3]; + argbuf = kmalloc(argsize, GFP_KERNEL); + if (argbuf == NULL) + return -ENOMEM; + + scsi_cmd[1] = (4 << 1); /* PIO Data-in */ + scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, + block count in sector count field */ + sreq->sr_data_direction = DMA_FROM_DEVICE; + } else { + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + sreq->sr_data_direction = DMA_NONE; + } + + scsi_cmd[0] = ATA_16; + + scsi_cmd[4] = args[2]; + if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */ + scsi_cmd[6] = args[3]; + scsi_cmd[8] = args[1]; + scsi_cmd[10] = 0x4f; + scsi_cmd[12] = 0xc2; + } else { + scsi_cmd[6] = args[1]; + } + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5); + + if (sreq->sr_result) { + rc = -EIO; + goto error; + } + + /* Need code to retrieve data from check condition? */ + + if ((argbuf) + && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize)) + rc = -EFAULT; +error: + scsi_release_request(sreq); + + if (argbuf) + kfree(argbuf); + + return rc; +} + +/** + * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl + * @dev: Device to whom we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ +int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[7]; + struct scsi_request *sreq; + + if (NULL == (void *)arg) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + scsi_cmd[0] = ATA_16; + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + scsi_cmd[4] = args[1]; + scsi_cmd[6] = args[2]; + scsi_cmd[8] = args[3]; + scsi_cmd[10] = args[4]; + scsi_cmd[12] = args[5]; + scsi_cmd[14] = args[0]; + + sreq = scsi_allocate_request(scsidev, GFP_KERNEL); + if (!sreq) { + rc = -EINTR; + goto error; + } + + sreq->sr_data_direction = DMA_NONE; + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5); + + if (sreq->sr_result) { + rc = -EIO; + goto error; + } + + /* Need code to retrieve data from check condition? */ + +error: + scsi_release_request(sreq); + return rc; +} + int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) { struct ata_port *ap; @@ -96,6 +241,16 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) return -EINVAL; return 0; + case HDIO_DRIVE_CMD: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_cmd_ioctl(scsidev, arg); + + case HDIO_DRIVE_TASK: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_task_ioctl(scsidev, arg); + default: rc = -ENOTTY; break; @@ -153,25 +308,70 @@ struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap, return qc; } +/** + * ata_dump_status - user friendly display of error info + * @id: id of the port in question + * @tf: ptr to filled out taskfile + * + * Decode and dump the ATA error/status registers for the user so + * that they have some idea what really happened at the non + * make-believe layer. + * + * LOCKING: + * inherited from caller + */ +void ata_dump_status(unsigned id, struct ata_taskfile *tf) +{ + u8 stat = tf->command, err = tf->feature; + + printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); + if (stat & ATA_BUSY) { + printk("Busy }\n"); /* Data is not valid in this case */ + } else { + if (stat & 0x40) printk("DriveReady "); + if (stat & 0x20) printk("DeviceFault "); + if (stat & 0x10) printk("SeekComplete "); + if (stat & 0x08) printk("DataRequest "); + if (stat & 0x04) printk("CorrectedError "); + if (stat & 0x02) printk("Index "); + if (stat & 0x01) printk("Error "); + printk("}\n"); + + if (err) { + printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); + if (err & 0x04) printk("DriveStatusError "); + if (err & 0x80) { + if (err & 0x04) printk("BadCRC "); + else printk("Sector "); + } + if (err & 0x40) printk("UncorrectableError "); + if (err & 0x10) printk("SectorIdNotFound "); + if (err & 0x02) printk("TrackZeroNotFound "); + if (err & 0x01) printk("AddrMarkNotFound "); + printk("}\n"); + } + } +} + /** * ata_to_sense_error - convert ATA error to SCSI error - * @qc: Command that we are erroring out * @drv_stat: value contained in ATA status register + * @drv_err: value contained in ATA error register + * @sk: the sense key we'll fill out + * @asc: the additional sense code we'll fill out + * @ascq: the additional sense code qualifier we'll fill out * - * Converts an ATA error into a SCSI error. While we are at it - * we decode and dump the ATA error for the user so that they - * have some idea what really happened at the non make-believe - * layer. + * Converts an ATA error into a SCSI error. Fill out pointers to + * SK, ASC, and ASCQ bytes for later use in fixed or descriptor + * format sense blocks. * * LOCKING: * spin_lock_irqsave(host_set lock) */ - -void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) +void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, + u8 *ascq) { - struct scsi_cmnd *cmd = qc->scsicmd; - u8 err = 0; - unsigned char *sb = cmd->sense_buffer; + int i; /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ @@ -212,105 +412,183 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered {0xFF, 0xFF, 0xFF, 0xFF}, // END mark }; - int i = 0; - - cmd->result = SAM_STAT_CHECK_CONDITION; /* * Is this an error we can process/parse */ - - if(drv_stat & ATA_ERR) - /* Read the err bits */ - err = ata_chk_err(qc->ap); - - /* Display the ATA level error info */ - - printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat); - if(drv_stat & 0x80) - { - printk("Busy "); - err = 0; /* Data is not valid in this case */ + if (drv_stat & ATA_BUSY) { + drv_err = 0; /* Ignore the err bits, they're invalid */ } - else { - if(drv_stat & 0x40) printk("DriveReady "); - if(drv_stat & 0x20) printk("DeviceFault "); - if(drv_stat & 0x10) printk("SeekComplete "); - if(drv_stat & 0x08) printk("DataRequest "); - if(drv_stat & 0x04) printk("CorrectedError "); - if(drv_stat & 0x02) printk("Index "); - if(drv_stat & 0x01) printk("Error "); + + if (drv_err) { + /* Look for drv_err */ + for (i = 0; sense_table[i][0] != 0xFF; i++) { + /* Look for best matches first */ + if ((sense_table[i][0] & drv_err) == + sense_table[i][0]) { + *sk = sense_table[i][1]; + *asc = sense_table[i][2]; + *ascq = sense_table[i][3]; + goto translate_done; + } + } + /* No immediate match */ + printk(KERN_WARNING "ata%u: no sense translation for " + "error 0x%02x\n", id, drv_err); } - printk("}\n"); - - if(err) - { - printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err); - if(err & 0x04) printk("DriveStatusError "); - if(err & 0x80) - { - if(err & 0x04) - printk("BadCRC "); - else - printk("Sector "); + + /* Fall back to interpreting status bits */ + for (i = 0; stat_table[i][0] != 0xFF; i++) { + if (stat_table[i][0] & drv_stat) { + *sk = stat_table[i][1]; + *asc = stat_table[i][2]; + *ascq = stat_table[i][3]; + goto translate_done; } - if(err & 0x40) printk("UncorrectableError "); - if(err & 0x10) printk("SectorIdNotFound "); - if(err & 0x02) printk("TrackZeroNotFound "); - if(err & 0x01) printk("AddrMarkNotFound "); - printk("}\n"); + } + /* No error? Undecoded? */ + printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n", + id, drv_stat); + + /* For our last chance pick, use medium read error because + * it's much more common than an ATA drive telling you a write + * has failed. + */ + *sk = MEDIUM_ERROR; + *asc = 0x11; /* "unrecovered read error" */ + *ascq = 0x04; /* "auto-reallocation failed" */ + + translate_done: + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to " + "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err, + *sk, *asc, *ascq); + return; +} + +/* + * ata_gen_ata_desc_sense - Generate check condition sense block. + * @qc: Command that completed. + * + * This function is specific to the ATA descriptor format sense + * block specified for the ATA pass through commands. Regardless + * of whether the command errored or not, return a sense + * block. Copy all controller registers into the sense + * block. Clear sense key, ASC & ASCQ if there is no error. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->tf; + unsigned char *sb = cmd->sense_buffer; + unsigned char *desc = sb + 8; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = SAM_STAT_CHECK_CONDITION; + + /* + * Read the controller registers. + */ + assert(NULL != qc->ap->ops->tf_read); + qc->ap->ops->tf_read(qc->ap, tf); - /* Should we dump sector info here too ?? */ + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[1], &sb[2], &sb[3]); + sb[1] &= 0x0f; } + /* + * Sense data is current and format is descriptor. + */ + sb[0] = 0x72; - /* Look for err */ - while(sense_table[i][0] != 0xFF) - { - /* Look for best matches first */ - if((sense_table[i][0] & err) == sense_table[i][0]) - { - sb[0] = 0x70; - sb[2] = sense_table[i][1]; - sb[7] = 0x0a; - sb[12] = sense_table[i][2]; - sb[13] = sense_table[i][3]; - return; - } - i++; + desc[0] = 0x09; + + /* + * Set length of additional sense data. + * Since we only populate descriptor 0, the total + * length is the same (fixed) length as descriptor 0. + */ + desc[1] = sb[7] = 14; + + /* + * Copy registers into sense buffer. + */ + desc[2] = 0x00; + desc[3] = tf->feature; /* == error reg */ + desc[5] = tf->nsect; + desc[7] = tf->lbal; + desc[9] = tf->lbam; + desc[11] = tf->lbah; + desc[12] = tf->device; + desc[13] = tf->command; /* == status reg */ + + /* + * Fill in Extend bit, and the high order bytes + * if applicable. + */ + if (tf->flags & ATA_TFLAG_LBA48) { + desc[2] |= 0x01; + desc[4] = tf->hob_nsect; + desc[6] = tf->hob_lbal; + desc[8] = tf->hob_lbam; + desc[10] = tf->hob_lbah; } - /* No immediate match */ - if(err) - printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err); +} - i = 0; - /* Fall back to interpreting status bits */ - while(stat_table[i][0] != 0xFF) - { - if(stat_table[i][0] & drv_stat) - { - sb[0] = 0x70; - sb[2] = stat_table[i][1]; - sb[7] = 0x0a; - sb[12] = stat_table[i][2]; - sb[13] = stat_table[i][3]; - return; - } - i++; +/** + * ata_gen_fixed_sense - generate a SCSI fixed sense block + * @qc: Command that we are erroring out + * + * Leverage ata_to_sense_error() to give us the codes. Fit our + * LBA in here if there's room. + * + * LOCKING: + * inherited from caller + */ +void ata_gen_fixed_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->tf; + unsigned char *sb = cmd->sense_buffer; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = SAM_STAT_CHECK_CONDITION; + + /* + * Read the controller registers. + */ + assert(NULL != qc->ap->ops->tf_read); + qc->ap->ops->tf_read(qc->ap, tf); + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[2], &sb[12], &sb[13]); + sb[2] &= 0x0f; } - /* No error ?? */ - printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat); - /* additional-sense-code[-qualifier] */ sb[0] = 0x70; - sb[2] = MEDIUM_ERROR; - sb[7] = 0x0A; - if (cmd->sc_data_direction == DMA_FROM_DEVICE) { - sb[12] = 0x11; /* "unrecovered read error" */ - sb[13] = 0x04; - } else { - sb[12] = 0x0C; /* "write error - */ - sb[13] = 0x02; /* auto-reallocation failed" */ + sb[7] = 0x0a; + if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) { + /* A small (28b) LBA will fit in the 32b info field */ + sb[0] |= 0x80; /* set valid bit */ + sb[3] = tf->device & 0x0f; + sb[4] = tf->lbah; + sb[5] = tf->lbam; + sb[6] = tf->lbal; } } @@ -626,11 +904,36 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; + int need_sense = drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ); + + /* For ATA pass thru (SAT) commands, generate a sense block if + * user mandated it or if there's an error. Note that if we + * generate because the user forced us to, a check condition + * is generated and the ATA register values are returned + * whether the command completed successfully or not. If there + * was no error, SK, ASC and ASCQ will all be zero. + */ + if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) && + ((cmd->cmnd[2] & 0x20) || need_sense)) { + ata_gen_ata_desc_sense(qc); + } else { + if (!need_sense) { + cmd->result = SAM_STAT_GOOD; + } else { + /* TODO: decide which descriptor format to use + * for 48b LBA devices and call that here + * instead of the fixed desc, which is only + * good for smaller LBA (and maybe CHS?) + * devices. + */ + ata_gen_fixed_sense(qc); + } + } - if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) - ata_to_sense_error(qc, drv_stat); - else - cmd->result = SAM_STAT_GOOD; + if (need_sense) { + /* The ata_gen_..._sense routines fill in tf */ + ata_dump_status(qc->ap->id, &qc->tf); + } qc->scsidone(cmd); @@ -671,8 +974,8 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, return; /* data is present; dma-map it */ - if (cmd->sc_data_direction == DMA_FROM_DEVICE || - cmd->sc_data_direction == DMA_TO_DEVICE) { + if (cmd->sc_data_direction == SCSI_DATA_READ || + cmd->sc_data_direction == SCSI_DATA_WRITE) { if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); @@ -692,7 +995,6 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (xlat_func(qc, scsicmd)) goto err_out; - /* select device, send command to hardware */ if (ata_qc_issue(qc)) goto err_out; @@ -1304,7 +1606,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; int using_pio = (dev->flags & ATA_DFLAG_PIO); - int nodata = (cmd->sc_data_direction == DMA_NONE); + int nodata = (cmd->sc_data_direction == SCSI_DATA_NONE); if (!using_pio) /* Check whether ATAPI DMA is safe */ @@ -1316,7 +1618,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) qc->complete_fn = atapi_qc_complete; qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (cmd->sc_data_direction == DMA_TO_DEVICE) { + if (cmd->sc_data_direction == SCSI_DATA_WRITE) { qc->tf.flags |= ATA_TFLAG_WRITE; DPRINTK("direction: write\n"); } @@ -1340,7 +1642,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) #ifdef ATAPI_ENABLE_DMADIR /* some SATA bridges need us to indicate data xfer direction */ - if (cmd->sc_data_direction != DMA_TO_DEVICE) + if (cmd->sc_data_direction != SCSI_DATA_WRITE) qc->tf.feature |= ATAPI_DMADIR; #endif } @@ -1393,6 +1695,143 @@ ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev) return dev; } +/* + * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. + * @byte1: Byte 1 from pass-thru CDB. + * + * RETURNS: + * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. + */ +static u8 +ata_scsi_map_proto(u8 byte1) +{ + switch((byte1 & 0x1e) >> 1) { + case 3: /* Non-data */ + return ATA_PROT_NODATA; + + case 6: /* DMA */ + return ATA_PROT_DMA; + + case 4: /* PIO Data-in */ + case 5: /* PIO Data-out */ + if (byte1 & 0xe0) { + return ATA_PROT_PIO_MULT; + } + return ATA_PROT_PIO; + + case 10: /* Device Reset */ + case 0: /* Hard Reset */ + case 1: /* SRST */ + case 2: /* Bus Idle */ + case 7: /* Packet */ + case 8: /* DMA Queued */ + case 9: /* Device Diagnostic */ + case 11: /* UDMA Data-in */ + case 12: /* UDMA Data-Out */ + case 13: /* FPDMA */ + default: /* Reserved */ + break; + } + + return ATA_PROT_UNKNOWN; +} + +/** + * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile + * @qc: command structure to be initialized + * @cmd: SCSI command to convert + * + * Handles either 12 or 16-byte versions of the CDB. + * + * RETURNS: + * Zero on success, non-zero on failure. + */ +static unsigned int +ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd) +{ + struct ata_taskfile *tf = &(qc->tf); + struct scsi_cmnd *cmd = qc->scsicmd; + + if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) + return 1; + + /* + * 12 and 16 byte CDBs use different offsets to + * provide the various register values. + */ + if (scsicmd[0] == ATA_16) { + /* + * 16-byte CDB - may contain extended commands. + * + * If that is the case, copy the upper byte register values. + */ + if (scsicmd[1] & 0x01) { + tf->hob_feature = scsicmd[3]; + tf->hob_nsect = scsicmd[5]; + tf->hob_lbal = scsicmd[7]; + tf->hob_lbam = scsicmd[9]; + tf->hob_lbah = scsicmd[11]; + tf->flags |= ATA_TFLAG_LBA48; + } else + tf->flags &= ~ATA_TFLAG_LBA48; + + /* + * Always copy low byte, device and command registers. + */ + tf->feature = scsicmd[4]; + tf->nsect = scsicmd[6]; + tf->lbal = scsicmd[8]; + tf->lbam = scsicmd[10]; + tf->lbah = scsicmd[12]; + tf->device = scsicmd[13]; + tf->command = scsicmd[14]; + } else { + /* + * 12-byte CDB - incapable of extended commands. + */ + tf->flags &= ~ATA_TFLAG_LBA48; + + tf->feature = scsicmd[3]; + tf->nsect = scsicmd[4]; + tf->lbal = scsicmd[5]; + tf->lbam = scsicmd[6]; + tf->lbah = scsicmd[7]; + tf->device = scsicmd[8]; + tf->command = scsicmd[9]; + } + + /* + * Filter SET_FEATURES - XFER MODE command -- otherwise, + * SET_FEATURES - XFER MODE must be preceded/succeeded + * by an update to hardware-specific registers for each + * controller (i.e. the reason for ->set_piomode(), + * ->set_dmamode(), and ->post_set_mode() hooks). + */ + if ((tf->command == ATA_CMD_SET_FEATURES) + && (tf->feature == SETFEATURES_XFER)) + return 1; + + /* + * Set flags so that all registers will be written, + * and pass on write indication (used for PIO/DMA + * setup.) + */ + tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); + + if (cmd->sc_data_direction == SCSI_DATA_WRITE) + tf->flags |= ATA_TFLAG_WRITE; + + /* + * Set transfer length. + * + * TODO: find out if we need to do more here to + * cover scatter/gather case. + */ + qc->nsect = cmd->bufflen / ATA_SECT_SIZE; + + return 0; +} + /** * ata_get_xlat_func - check if SCSI to ATA translation is possible * @dev: ATA device @@ -1425,6 +1864,10 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case VERIFY: case VERIFY_16: return ata_scsi_verify_xlat; + + case ATA_12: + case ATA_16: + return ata_scsi_pass_thru; } return NULL; @@ -1581,7 +2024,7 @@ void ata_scsi_simulate(u16 *id, ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); break; - /* mandantory commands we haven't implemented yet */ + /* mandatory commands we haven't implemented yet */ case REQUEST_SENSE: /* all other commands */ diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 6518226b8f87..c595f5f58c16 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -44,10 +44,11 @@ extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); +extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); +extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); /* libata-scsi.c */ -extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 659ecf48fb4a..27d4d9ea6c6d 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -113,6 +113,9 @@ extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE]; /* values for service action in */ #define SAI_READ_CAPACITY_16 0x10 +/* Values for T10/04-262r7 */ +#define ATA_16 0x85 /* 16-byte pass-thru */ +#define ATA_12 0xa1 /* 12-byte pass-thru */ /* * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft -- GitLab From 0274aa2506fd2fe89a58dd6cd64d3b3f7b976af8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 22 Jun 2005 13:50:56 -0400 Subject: [PATCH 0003/1519] libata: Update 'passthru' branch for latest libata --- drivers/scsi/libata-scsi.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index cdc0a10a606c..c1cf5e038967 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -582,7 +582,11 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) sb[0] = 0x70; sb[7] = 0x0a; + +#if 0 /* when C/H/S support is merged */ if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) { +#endif + if (!(tf->flags & ATA_TFLAG_LBA48)) { /* A small (28b) LBA will fit in the 32b info field */ sb[0] |= 0x80; /* set valid bit */ sb[3] = tf->device & 0x0f; @@ -977,8 +981,8 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, return; /* data is present; dma-map it */ - if (cmd->sc_data_direction == SCSI_DATA_READ || - cmd->sc_data_direction == SCSI_DATA_WRITE) { + if (cmd->sc_data_direction == DMA_FROM_DEVICE || + cmd->sc_data_direction == DMA_TO_DEVICE) { if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); @@ -1609,7 +1613,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; int using_pio = (dev->flags & ATA_DFLAG_PIO); - int nodata = (cmd->sc_data_direction == SCSI_DATA_NONE); + int nodata = (cmd->sc_data_direction == DMA_NONE); if (!using_pio) /* Check whether ATAPI DMA is safe */ @@ -1621,7 +1625,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) qc->complete_fn = atapi_qc_complete; qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (cmd->sc_data_direction == SCSI_DATA_WRITE) { + if (cmd->sc_data_direction == DMA_TO_DEVICE) { qc->tf.flags |= ATA_TFLAG_WRITE; DPRINTK("direction: write\n"); } @@ -1645,7 +1649,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) #ifdef ATAPI_ENABLE_DMADIR /* some SATA bridges need us to indicate data xfer direction */ - if (cmd->sc_data_direction != SCSI_DATA_WRITE) + if (cmd->sc_data_direction != DMA_TO_DEVICE) qc->tf.feature |= ATAPI_DMADIR; #endif } @@ -1821,7 +1825,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd) */ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); - if (cmd->sc_data_direction == SCSI_DATA_WRITE) + if (cmd->sc_data_direction == DMA_TO_DEVICE) tf->flags |= ATA_TFLAG_WRITE; /* -- GitLab From edb3366703224d5d8df573ae698ccd6b488dc743 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 28 Jul 2005 10:36:22 +0900 Subject: [PATCH 0004/1519] [PATCH] SATA: rewritten sil24 driver This is rewritten sil24 driver against v2.6.13-rc3. Rewritten based on driver originally submitted by Silicon Image. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/Kconfig | 8 + drivers/scsi/Makefile | 1 + drivers/scsi/sata_sil24.c | 786 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 795 insertions(+) create mode 100644 drivers/scsi/sata_sil24.c diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 96df148ed969..939d3442c13a 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -499,6 +499,14 @@ config SCSI_SATA_SIL If unsure, say N. +config SCSI_SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on SCSI_SATA && PCI && EXPERIMENTAL + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + config SCSI_SATA_SIS tristate "SiS 964/180 SATA support" depends on SCSI_SATA && PCI && EXPERIMENTAL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 3746fb9fa2f5..64aaab64aeb6 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -126,6 +126,7 @@ obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o +obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c new file mode 100644 index 000000000000..9958bc10a258 --- /dev/null +++ b/drivers/scsi/sata_sil24.c @@ -0,0 +1,786 @@ +/* + * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers + * + * Copyright 2005 Tejun Heo + * + * Based on preview driver from Silicon Image. + * + * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support + * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make + * those work. Enabling those shouldn't be difficult. Basic + * structure is all there (in libata-dev tree). If you have any + * information about this hardware, please contact me or linux-ide. + * Info is needed on... + * + * - How to issue tagged commands and turn on sactive on issue accordingly. + * - Where to put an ATAPI command and how to tell the device to send it. + * - How to enable/use 64bit. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include + +#define DRV_NAME "sata_sil24" +#define DRV_VERSION "0.20" /* Silicon Image's preview driver was 0.10 */ + +#define NR_PORTS 4 + +/* + * Port request block (PRB) 32 bytes + */ +struct sil24_prb { + u16 ctrl; + u16 prot; + u32 rx_cnt; + u8 fis[6 * 4]; +}; + +/* + * Scatter gather entry (SGE) 16 bytes + */ +struct sil24_sge { + u64 addr; + u32 cnt; + u32 flags; +}; + +/* + * Port multiplier + */ +struct sil24_port_multiplier { + u32 diag; + u32 sactive; +}; + +enum { + /* + * Global controller registers (128 bytes @ BAR0) + */ + /* 32 bit regs */ + HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ + HOST_CTRL = 0x40, + HOST_IRQ_STAT = 0x44, + HOST_PHY_CFG = 0x48, + HOST_BIST_CTRL = 0x50, + HOST_BIST_PTRN = 0x54, + HOST_BIST_STAT = 0x58, + HOST_MEM_BIST_STAT = 0x5c, + HOST_FLASH_CMD = 0x70, + /* 8 bit regs */ + HOST_FLASH_DATA = 0x74, + HOST_TRANSITION_DETECT = 0x75, + HOST_GPIO_CTRL = 0x76, + HOST_I2C_ADDR = 0x78, /* 32 bit */ + HOST_I2C_DATA = 0x7c, + HOST_I2C_XFER_CNT = 0x7e, + HOST_I2C_CTRL = 0x7f, + + /* HOST_SLOT_STAT bits */ + HOST_SSTAT_ATTN = (1 << 31), + + /* + * Port registers + * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) + */ + PORT_REGS_SIZE = 0x2000, + PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ + /* TF is overlayed w/ PRB regs in the preview driver, + * but it doesn't seem to work. */ + PORT_TF = 0x0000, + + PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ + /* 32 bit regs */ + PORT_CTRL_STAT = 0x1000, /* write:ctrl, read:stat */ + PORT_CTRL_CLR = 0x1004, + PORT_IRQ_STAT = 0x1008, + PORT_IRQ_ENABLE_SET = 0x1010, + PORT_IRQ_ENABLE_CLR = 0x1014, + PORT_ACTIVATE_UPPER_ADDR= 0x101c, + PORT_EXEC_FIFO = 0x1020, + PORT_CMD_ERR = 0x1024, + PORT_FIS_CFG = 0x1028, + PORT_FIFO_THRES = 0x102c, + /* 16 bit regs */ + PORT_DECODE_ERR_CNT = 0x1040, + PORT_DECODE_ERR_THRESH = 0x1042, + PORT_CRC_ERR_CNT = 0x1044, + PORT_CRC_ERR_THRESH = 0x1046, + PORT_HSHK_ERR_CNT = 0x1048, + PORT_HSHK_ERR_THRESH = 0x104a, + /* 32 bit regs */ + PORT_PHY_CFG = 0x1050, + PORT_SLOT_STAT = 0x1800, + PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ + PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ + PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ + PORT_SCONTROL = 0x1f00, + PORT_SSTATUS = 0x1f04, + PORT_SERROR = 0x1f08, + PORT_SACTIVE = 0x1f0c, + + /* PORT_CTRL_STAT bits */ + PORT_CS_PORT_RST = (1 << 0), /* port reset */ + PORT_CS_DEV_RST = (1 << 1), /* device reset */ + PORT_CS_INIT = (1 << 2), /* port initialize */ + PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_RESUME = (1 << 4), /* port resume */ + PORT_CS_32BIT_ACTV = (1 << 5), /* 32-bit activation */ + PORT_CS_PM_EN = (1 << 6), /* port multiplier enable */ + PORT_CS_RDY = (1 << 7), /* port ready to accept commands */ + + /* PORT_IRQ_STAT/ENABLE_SET/CLR */ + /* bits[11:0] are masked */ + PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ + PORT_IRQ_ERROR = (1 << 1), /* command execution error */ + PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ + PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ + PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ + PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */ + PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */ + + /* bits[27:16] are unmasked (raw) */ + PORT_IRQ_RAW_SHIFT = 16, + PORT_IRQ_MASKED_MASK = 0x7ff, + PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), + + /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ + PORT_IRQ_STEER_SHIFT = 30, + PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), + + /* PORT_CMD_ERR constants */ + PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ + PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ + PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ + PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ + PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ + PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ + PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ + PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ + PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ + PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ + PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ + PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ + PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ + PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ + PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ + PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ + PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ + PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ + PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ + PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ + PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ + PORT_CERR_SENDSERVICE = 36, /* FIS received whiel sending service */ + + /* + * Other constants + */ + SGE_TRM = (1 << 31), /* Last SGE in chain */ + PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* board id */ + BID_SIL3124 = 0, + BID_SIL3132 = 1, + + IRQ_STAT_4PORTS = 0xf, +}; + +struct sil24_cmd_block { + struct sil24_prb prb; + struct sil24_sge sge[LIBATA_MAX_PRD]; +}; + +/* + * ap->private_data + * + * The preview driver always returned 0 for status. We emulate it + * here from the previous interrupt. + */ +struct sil24_port_priv { + void *port; + struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ + dma_addr_t cmd_block_dma; /* DMA base addr for them */ +}; + +/* ap->host_set->private_data */ +struct sil24_host_priv { + void *host_base; /* global controller control (128 bytes @BAR0) */ + void *port_base; /* port registers (4 * 8192 bytes @BAR2) */ +}; + +static u8 sil24_check_status(struct ata_port *ap); +static u8 sil24_check_err(struct ata_port *ap); +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); +static void sil24_phy_reset(struct ata_port *ap); +static void sil24_qc_prep(struct ata_queued_cmd *qc); +static int sil24_qc_issue(struct ata_queued_cmd *qc); +static void sil24_irq_clear(struct ata_port *ap); +static void sil24_eng_timeout(struct ata_port *ap); +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static int sil24_port_start(struct ata_port *ap); +static void sil24_port_stop(struct ata_port *ap); +static void sil24_host_stop(struct ata_host_set *host_set); +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +static struct pci_device_id sil24_pci_tbl[] = { + { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, + { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, +}; + +static struct pci_driver sil24_pci_driver = { + .name = DRV_NAME, + .id_table = sil24_pci_tbl, + .probe = sil24_init_one, + .remove = ata_pci_remove_one, /* safe? */ +}; + +static Scsi_Host_Template sil24_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, /* NCQ not supported yet */ +}; + +static struct ata_port_operations sil24_ops = { + .port_disable = ata_port_disable, + + .check_status = sil24_check_status, + .check_altstatus = sil24_check_status, + .check_err = sil24_check_err, + .dev_select = ata_noop_dev_select, + + .phy_reset = sil24_phy_reset, + + .qc_prep = sil24_qc_prep, + .qc_issue = sil24_qc_issue, + + .eng_timeout = sil24_eng_timeout, + + .irq_handler = sil24_interrupt, + .irq_clear = sil24_irq_clear, + + .scr_read = sil24_scr_read, + .scr_write = sil24_scr_write, + + .port_start = sil24_port_start, + .port_stop = sil24_port_stop, + .host_stop = sil24_host_stop, +}; + +static struct ata_port_info sil24_port_info[] = { + /* sil_3124 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3132 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, +}; + +static u8 sil24_check_status(struct ata_port *ap) +{ + return ATA_DRDY; +} + +static u8 sil24_check_err(struct ata_port *ap) +{ + return 0; +} + +static int sil24_scr_map[] = { + [SCR_CONTROL] = 0, + [SCR_STATUS] = 1, + [SCR_ERROR] = 2, + [SCR_ACTIVE] = 3, +}; + +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) +{ + void *scr_addr = (void *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + return readl(scr_addr + sil24_scr_map[sc_reg] * 4); + } + return 0xffffffffU; +} + +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) +{ + void *scr_addr = (void *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); + } +} + +static void sil24_phy_reset(struct ata_port *ap) +{ + __sata_phy_reset(ap); + /* + * No ATAPI yet. Just unconditionally indicate ATA device. + * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA + * and libata core will ignore the device. + */ + if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + ap->device[0].class = ATA_DEV_ATA; +} + +static inline void sil24_fill_sg(struct ata_queued_cmd *qc, + struct sil24_cmd_block *cb) +{ + struct scatterlist *sg = qc->sg; + struct sil24_sge *sge = cb->sge; + unsigned i; + + for (i = 0; i < qc->n_elem; i++, sg++, sge++) { + sge->addr = cpu_to_le64(sg_dma_address(sg)); + sge->cnt = cpu_to_le32(sg_dma_len(sg)); + sge->flags = 0; + sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM); + } +} + +static void sil24_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + struct sil24_cmd_block *cb = pp->cmd_block + qc->tag; + struct sil24_prb *prb = &cb->prb; + + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + break; + default: + /* ATAPI isn't supported yet */ + BUG(); + } + + ata_tf_to_fis(&qc->tf, prb->fis, 0); + + if (qc->flags & ATA_QCFLAG_DMAMAP) + sil24_fill_sg(qc, cb); +} + +static int sil24_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); + + writel((u32)paddr, pp->port + PORT_CMD_ACTIVATE); + return 0; +} + +static void sil24_irq_clear(struct ata_port *ap) +{ + /* unused */ +} + +static void sil24_reset_controller(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + int cnt; + u32 tmp; + + printk(KERN_NOTICE DRV_NAME + " ata%u: resetting controller...\n", ap->id); + + /* Reset controller state. Is this correct? */ + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + readl(port + PORT_CTRL_STAT); /* sync */ + + /* Max ~100ms */ + for (cnt = 0; cnt < 1000; cnt++) { + udelay(100); + tmp = readl(port + PORT_CTRL_STAT); + if (!(tmp & PORT_CS_DEV_RST)) + break; + } + if (tmp & PORT_CS_DEV_RST) + printk(KERN_ERR DRV_NAME + " ata%u: failed to reset controller\n", ap->id); +} + +static void sil24_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (!qc) { + printk(KERN_ERR "ata%u: BUG: tiemout without command\n", + ap->id); + return; + } + + /* + * hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + printk(KERN_ERR "ata%u: command timeout\n", ap->id); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); +} + +static inline void sil24_host_intr(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + u32 slot_stat; + + slot_stat = readl(port + PORT_SLOT_STAT); + if (!(slot_stat & HOST_SSTAT_ATTN)) { + if (qc) + ata_qc_complete(qc, 0); + } else { + u32 irq_stat, cmd_err, sstatus, serror; + + irq_stat = readl(port + PORT_IRQ_STAT); + cmd_err = readl(port + PORT_CMD_ERR); + sstatus = readl(port + PORT_SSTATUS); + serror = readl(port + PORT_SERROR); + + /* Clear IRQ/errors */ + writel(irq_stat, port + PORT_IRQ_STAT); + if (cmd_err) + writel(cmd_err, port + PORT_CMD_ERR); + if (serror) + writel(serror, port + PORT_SERROR); + + printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" + " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", + ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + + if (qc) + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); + } +} + +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct sil24_host_priv *hpriv = host_set->private_data; + unsigned handled = 0; + u32 status; + int i; + + status = readl(hpriv->host_base + HOST_IRQ_STAT); + + if (!(status & IRQ_STAT_4PORTS)) + goto out; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) + if (status & (1 << i)) { + struct ata_port *ap = host_set->ports[i]; + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) + sil24_host_intr(host_set->ports[i]); + else { + u32 tmp; + printk(KERN_WARNING DRV_NAME + ": spurious interrupt from port %d\n", i); + tmp = readl(hpriv->host_base + HOST_CTRL); + tmp &= ~(1 << i); + writel(tmp, hpriv->host_base + HOST_CTRL); + } + handled++; + } + + spin_unlock(&host_set->lock); + out: + return IRQ_RETVAL(handled); +} + +static int sil24_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_host_priv *hpriv = ap->host_set->private_data; + struct sil24_port_priv *pp; + struct sil24_cmd_block *cb; + size_t cb_size = sizeof(*cb); + dma_addr_t cb_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + memset(pp, 0, sizeof(*pp)); + + cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); + if (!cb) { + kfree(pp); + return -ENOMEM; + } + memset(cb, 0, cb_size); + + pp->port = hpriv->port_base + ap->port_no * PORT_REGS_SIZE; + pp->cmd_block = cb; + pp->cmd_block_dma = cb_dma; + + ap->private_data = pp; + + return 0; +} + +static void sil24_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_port_priv *pp = ap->private_data; + size_t cb_size = sizeof(*pp->cmd_block); + + dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); + kfree(pp); +} + +static void sil24_host_stop(struct ata_host_set *host_set) +{ + struct sil24_host_priv *hpriv = host_set->private_data; + + iounmap(hpriv->host_base); + iounmap(hpriv->port_base); + kfree(hpriv); +} + +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version = 0; + unsigned int board_id = (unsigned int)ent->driver_data; + struct ata_probe_ent *probe_ent = NULL; + struct sil24_host_priv *hpriv = NULL; + void *host_base = NULL, *port_base = NULL; + int i, rc; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto out_disable; + + rc = -ENOMEM; + /* ioremap mmio registers */ + host_base = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!host_base) + goto out_free; + port_base = ioremap(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + if (!port_base) + goto out_free; + + /* allocate & init probe_ent and hpriv */ + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) + goto out_free; + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + goto out_free; + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = sil24_port_info[board_id].sht; + probe_ent->host_flags = sil24_port_info[board_id].host_flags; + probe_ent->pio_mask = sil24_port_info[board_id].pio_mask; + probe_ent->udma_mask = sil24_port_info[board_id].udma_mask; + probe_ent->port_ops = sil24_port_info[board_id].port_ops; + probe_ent->n_ports = (board_id == BID_SIL3124) ? 4 : 2; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = port_base; + probe_ent->private_data = hpriv; + + memset(hpriv, 0, sizeof(*hpriv)); + hpriv->host_base = host_base; + hpriv->port_base = port_base; + + /* + * Configure the device + */ + /* + * FIXME: This device is certainly 64-bit capable. We just + * don't know how to use it. After fixing 32bit activation in + * this function, enable 64bit masks here. + */ + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + goto out_free; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + goto out_free; + } + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* Mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + for (i = 0; i < probe_ent->n_ports; i++) { + void *port = port_base + i * PORT_REGS_SIZE; + unsigned long portu = (unsigned long)port; + u32 tmp; + int cnt; + + probe_ent->port[i].cmd_addr = portu + PORT_TF; + probe_ent->port[i].ctl_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].altstatus_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; + + ata_std_ports(&probe_ent->port[i]); + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + readl(port + PORT_CTRL_STAT); /* sync */ + for (cnt = 0; cnt < 10; cnt++) { + msleep(10); + tmp = readl(port + PORT_CTRL_STAT); + if (!(tmp & PORT_CS_PORT_RST)) + break; + } + if (tmp & PORT_CS_PORT_RST) + printk(KERN_ERR DRV_NAME + "(%s): failed to clear port RST\n", + pci_name(pdev)); + } + + /* Zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* FIXME: 32bit activation? */ + writel(0, port + PORT_ACTIVATE_UPPER_ADDR); + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT); + + /* Configure interrupts */ + writel(0xffff, port + PORT_IRQ_ENABLE_CLR); + writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS, + port + PORT_IRQ_ENABLE_SET); + + /* Clear interrupts */ + writel(0x0fff0fff, port + PORT_IRQ_STAT); + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); + + pci_set_master(pdev); + + ata_device_add(probe_ent); + + kfree(probe_ent); + return 0; + + out_free: + if (host_base) + iounmap(host_base); + if (port_base) + iounmap(port_base); + kfree(probe_ent); + kfree(hpriv); + pci_release_regions(pdev); + out_disable: + pci_disable_device(pdev); + return rc; +} + +static int __init sil24_init(void) +{ + return pci_module_init(&sil24_pci_driver); +} + +static void __exit sil24_exit(void) +{ + pci_unregister_driver(&sil24_pci_driver); +} + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil24_pci_tbl); + +module_init(sil24_init); +module_exit(sil24_exit); -- GitLab From 1483467faa0170cf401955b3d8d3486ea0fe802d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:42 +0900 Subject: [PATCH 0005/1519] [PATCH] sil24: add FIXME comment above ata_device_add 01_sil24_add-FIXME-comment.patch Add FIXME comment above ata_device_add. Signed-off-by: Tejun Heo sata_sil24.c | 1 + 1 files changed, 1 insertion(+) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 9958bc10a258..4868ad79b92e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -749,6 +749,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); + /* FIXME: check ata_device_add return value */ ata_device_add(probe_ent); kfree(probe_ent); -- GitLab From 3cc4571c4106735665e048850ff6656de9558d60 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:47 +0900 Subject: [PATCH 0006/1519] [PATCH] sil24: remove irq disable code on spurious interrupt 02_sil24_remove-irq-disable-on-spurious-intr.patch If interrupt occurs on a disabled port, the driver used to mask the port's interrupt, but we don't know if such action is necessary yet and that's not what other drives do. So, just do nothing and tell IRQ subsystem that it's not our interrupt. Signed-off-by: Tejun Heo sata_sil24.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 4868ad79b92e..0f810cdd3cc2 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -535,17 +535,12 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) if (status & (1 << i)) { struct ata_port *ap = host_set->ports[i]; - if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) { sil24_host_intr(host_set->ports[i]); - else { - u32 tmp; - printk(KERN_WARNING DRV_NAME - ": spurious interrupt from port %d\n", i); - tmp = readl(hpriv->host_base + HOST_CTRL); - tmp &= ~(1 << i); - writel(tmp, hpriv->host_base + HOST_CTRL); - } - handled++; + handled++; + } else + printk(KERN_ERR DRV_NAME + ": interrupt from disabled port %d\n", i); } spin_unlock(&host_set->lock); -- GitLab From 06460aeaa26ed4a86b92c8451365d3f48abd3786 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:52 +0900 Subject: [PATCH 0007/1519] [PATCH] sil24: add testing for PCI fault 03_sil24_add-pci-fault-check.patch On entry to interrupt handler, PORT_SLOT_STAT register is read first. Check if PCI fault or device removal has occurred by testing the value for 0xffffffff. Signed-off-by: Tejun Heo sata_sil24.c | 6 ++++++ 1 files changed, 6 insertions(+) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 0f810cdd3cc2..c9318bda46a3 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -527,6 +527,12 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * status = readl(hpriv->host_base + HOST_IRQ_STAT); + if (status == 0xffffffff) { + printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, " + "PCI fault or device removal?\n"); + goto out; + } + if (!(status & IRQ_STAT_4PORTS)) goto out; -- GitLab From 8746618d4f18fab25916686b0d8a6be2c2912de1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:57 +0900 Subject: [PATCH 0008/1519] [PATCH] sil24: move error handling out of hot interrupt path 04_sil24_add-error_intr-function.patch Move error handling from sil24_host_intr into separate function - sil24_error_intr. Signed-off-by: Tejun Heo sata_sil24.c | 55 +++++++++++++++++++++++++++++++------------------------ 1 files changed, 31 insertions(+), 24 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 55 ++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 24 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index c9318bda46a3..6544226c1b28 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -480,6 +480,35 @@ static void sil24_eng_timeout(struct ata_port *ap) sil24_reset_controller(ap); } +static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + u32 irq_stat, cmd_err, sstatus, serror; + + irq_stat = readl(port + PORT_IRQ_STAT); + cmd_err = readl(port + PORT_CMD_ERR); + sstatus = readl(port + PORT_SSTATUS); + serror = readl(port + PORT_SERROR); + + /* Clear IRQ/errors */ + writel(irq_stat, port + PORT_IRQ_STAT); + if (cmd_err) + writel(cmd_err, port + PORT_CMD_ERR); + if (serror) + writel(serror, port + PORT_SERROR); + + printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" + " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", + ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + + if (qc) + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); +} + static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); @@ -491,30 +520,8 @@ static inline void sil24_host_intr(struct ata_port *ap) if (!(slot_stat & HOST_SSTAT_ATTN)) { if (qc) ata_qc_complete(qc, 0); - } else { - u32 irq_stat, cmd_err, sstatus, serror; - - irq_stat = readl(port + PORT_IRQ_STAT); - cmd_err = readl(port + PORT_CMD_ERR); - sstatus = readl(port + PORT_SSTATUS); - serror = readl(port + PORT_SERROR); - - /* Clear IRQ/errors */ - writel(irq_stat, port + PORT_IRQ_STAT); - if (cmd_err) - writel(cmd_err, port + PORT_CMD_ERR); - if (serror) - writel(serror, port + PORT_SERROR); - - printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" - " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", - ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); - - if (qc) - ata_qc_complete(qc, ATA_ERR); - - sil24_reset_controller(ap); - } + } else + sil24_error_intr(ap, slot_stat); } static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) -- GitLab From 33d015b9f24d143859bb40dbe7bbb4c7805cee7d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:02 +0900 Subject: [PATCH 0009/1519] [PATCH] sil24: remove PORT_TF 05_sil24_remove-PORT_TF.patch Remove PORT_TF, as taskfile isn't located at PORT_TF. Signed-off-by: Tejun Heo sata_sil24.c | 7 +------ 1 files changed, 1 insertion(+), 6 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 6544226c1b28..47a7bfc4a6d8 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -104,9 +104,6 @@ enum { */ PORT_REGS_SIZE = 0x2000, PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ - /* TF is overlayed w/ PRB regs in the preview driver, - * but it doesn't seem to work. */ - PORT_TF = 0x0000, PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ /* 32 bit regs */ @@ -703,9 +700,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 tmp; int cnt; - probe_ent->port[i].cmd_addr = portu + PORT_TF; - probe_ent->port[i].ctl_addr = portu + PORT_TF + 0xa; - probe_ent->port[i].altstatus_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].cmd_addr = portu; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); -- GitLab From 4f50c3cbb4b608ae4d8ee73ce273d819d901a83f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:07 +0900 Subject: [PATCH 0010/1519] [PATCH] sil24: replace pp->port w/ ap->ioaddr.cmd_addr 06_sil24_remove-pp-port.patch As ap->ioaddr.cmd_addr isn't used for PORT_TF anymore, replace pp->port w/ it as AHCI does. Signed-off-by: Tejun Heo sata_sil24.c | 17 ++++++----------- 1 files changed, 6 insertions(+), 11 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 47a7bfc4a6d8..547c29a5613b 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -214,7 +214,6 @@ struct sil24_cmd_block { * here from the previous interrupt. */ struct sil24_port_priv { - void *port; struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ }; @@ -414,10 +413,11 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + void *port = (void *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); - writel((u32)paddr, pp->port + PORT_CMD_ACTIVATE); + writel((u32)paddr, port + PORT_CMD_ACTIVATE); return 0; } @@ -428,8 +428,7 @@ static void sil24_irq_clear(struct ata_port *ap) static void sil24_reset_controller(struct ata_port *ap) { - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; int cnt; u32 tmp; @@ -480,8 +479,7 @@ static void sil24_eng_timeout(struct ata_port *ap) static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); @@ -509,8 +507,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; u32 slot_stat; slot_stat = readl(port + PORT_SLOT_STAT); @@ -561,7 +558,6 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * static int sil24_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; - struct sil24_host_priv *hpriv = ap->host_set->private_data; struct sil24_port_priv *pp; struct sil24_cmd_block *cb; size_t cb_size = sizeof(*cb); @@ -579,7 +575,6 @@ static int sil24_port_start(struct ata_port *ap) } memset(cb, 0, cb_size); - pp->port = hpriv->port_base + ap->port_no * PORT_REGS_SIZE; pp->cmd_block = cb; pp->cmd_block_dma = cb_dma; @@ -700,7 +695,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 tmp; int cnt; - probe_ent->port[i].cmd_addr = portu; + probe_ent->port[i].cmd_addr = portu + PORT_PRB; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); -- GitLab From e382eb1dbdb2dec69806a72551bcb4a736142f6d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:13 +0900 Subject: [PATCH 0011/1519] [PATCH] sil24: fix PORT_CTRL_STAT constants 07_sil24_fix-PORT_CTRL_STAT-constants.patch PORT_CTRL_STAT constants were copied incorrectly from the preview driver. Signed-off-by: Edward Falk sata_sil24.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 547c29a5613b..7a3d50dcd938 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -140,10 +140,10 @@ enum { PORT_CS_DEV_RST = (1 << 1), /* device reset */ PORT_CS_INIT = (1 << 2), /* port initialize */ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ - PORT_CS_RESUME = (1 << 4), /* port resume */ - PORT_CS_32BIT_ACTV = (1 << 5), /* 32-bit activation */ - PORT_CS_PM_EN = (1 << 6), /* port multiplier enable */ - PORT_CS_RDY = (1 << 7), /* port ready to accept commands */ + PORT_CS_RESUME = (1 << 6), /* port resume */ + PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ + PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ + PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ /* PORT_IRQ_STAT/ENABLE_SET/CLR */ /* bits[11:0] are masked */ -- GitLab From 83bbecc905b3431c60fe282830e09aaaab97b26a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:18 +0900 Subject: [PATCH 0012/1519] [PATCH] sil24: add more comments for constants 08_sil24_add-comments-for-constants.patch Add more comments to constants. Signed-off-by: Edward Falk sata_sil24.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 7a3d50dcd938..cb91894471f2 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -107,14 +107,14 @@ enum { PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ /* 32 bit regs */ - PORT_CTRL_STAT = 0x1000, /* write:ctrl, read:stat */ - PORT_CTRL_CLR = 0x1004, - PORT_IRQ_STAT = 0x1008, - PORT_IRQ_ENABLE_SET = 0x1010, - PORT_IRQ_ENABLE_CLR = 0x1014, + PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ + PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ + PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ + PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ + PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ PORT_ACTIVATE_UPPER_ADDR= 0x101c, - PORT_EXEC_FIFO = 0x1020, - PORT_CMD_ERR = 0x1024, + PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ + PORT_CMD_ERR = 0x1024, /* command error number */ PORT_FIS_CFG = 0x1028, PORT_FIFO_THRES = 0x102c, /* 16 bit regs */ @@ -187,7 +187,7 @@ enum { PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ - PORT_CERR_SENDSERVICE = 36, /* FIS received whiel sending service */ + PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ /* * Other constants -- GitLab From 25732ad493b22b7d9f0d250c5a9ad17219f96a47 Mon Sep 17 00:00:00 2001 From: Bruce Losure Date: Fri, 2 Sep 2005 15:16:35 -0500 Subject: [PATCH 0013/1519] [IA64] Altix patch for fpga reset 1) workaround a h/w reset issue 2) to improve the determination of FPGA-based h/w in the arch/ia64/sn/kernel/tiocx code. Signed-off-by: Bruce Losure Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/tiocx.c | 62 +++++++++++++++++++----------------- include/asm-ia64/sn/l1.h | 12 +++++++ include/asm-ia64/sn/sn_sal.h | 43 +++++++++++++++++++++++++ include/asm-ia64/sn/tiocx.h | 3 +- 4 files changed, 90 insertions(+), 30 deletions(-) diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 254fe15c064b..d8664715764b 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -183,11 +183,12 @@ int cx_driver_unregister(struct cx_drv *cx_driver) * @part_num: device's part number * @mfg_num: device's manufacturer number * @hubdev: hub info associated with this device + * @bt: board type of the device * */ int cx_device_register(nasid_t nasid, int part_num, int mfg_num, - struct hubdev_info *hubdev) + struct hubdev_info *hubdev, int bt) { struct cx_dev *cx_dev; @@ -200,6 +201,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num, cx_dev->cx_id.mfg_num = mfg_num; cx_dev->cx_id.nasid = nasid; cx_dev->hubdev = hubdev; + cx_dev->bt = bt; cx_dev->dev.parent = NULL; cx_dev->dev.bus = &tiocx_bus_type; @@ -238,7 +240,8 @@ static int cx_device_reload(struct cx_dev *cx_dev) { cx_device_unregister(cx_dev); return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num, - cx_dev->cx_id.mfg_num, cx_dev->hubdev); + cx_dev->cx_id.mfg_num, cx_dev->hubdev, + cx_dev->bt); } static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget, @@ -365,26 +368,20 @@ static void tio_corelet_reset(nasid_t nasid, int corelet) udelay(2000); } -static int tiocx_btchar_get(int nasid) +static int is_fpga_tio(int nasid, int *bt) { - moduleid_t module_id; - geoid_t geoid; - int cnodeid; - - cnodeid = nasid_to_cnodeid(nasid); - geoid = cnodeid_get_geoid(cnodeid); - module_id = geo_module(geoid); - return MODULE_GET_BTCHAR(module_id); -} + int ioboard_type; -static int is_fpga_brick(int nasid) -{ - switch (tiocx_btchar_get(nasid)) { + ioboard_type = ia64_sn_sysctl_ioboard_get(nasid); + + switch (ioboard_type) { case L1_BRICKTYPE_SA: case L1_BRICKTYPE_ATHENA: - case L1_BRICKTYPE_DAYTONA: + case L1_BOARDTYPE_DAYTONA: + *bt = ioboard_type; return 1; } + return 0; } @@ -407,16 +404,22 @@ static int tiocx_reload(struct cx_dev *cx_dev) if (bitstream_loaded(nasid)) { uint64_t cx_id; - - cx_id = - *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) + + int rv; + + rv = ia64_sn_sysctl_tio_clock_reset(nasid); + if (rv) { + printk(KERN_ALERT "CX port JTAG reset failed.\n"); + } else { + cx_id = *(volatile uint64_t *) + (TIO_SWIN_BASE(nasid, TIOCX_CORELET) + WIDGET_ID); - part_num = XWIDGET_PART_NUM(cx_id); - mfg_num = XWIDGET_MFG_NUM(cx_id); - DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num); - /* just ignore it if it's a CE */ - if (part_num == TIO_CE_ASIC_PARTNUM) - return 0; + part_num = XWIDGET_PART_NUM(cx_id); + mfg_num = XWIDGET_MFG_NUM(cx_id); + DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num); + /* just ignore it if it's a CE */ + if (part_num == TIO_CE_ASIC_PARTNUM) + return 0; + } } cx_dev->cx_id.part_num = part_num; @@ -436,10 +439,10 @@ static ssize_t show_cxdev_control(struct device *dev, struct device_attribute *a { struct cx_dev *cx_dev = to_cx_dev(dev); - return sprintf(buf, "0x%x 0x%x 0x%x %d\n", + return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n", cx_dev->cx_id.nasid, cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num, - tiocx_btchar_get(cx_dev->cx_id.nasid)); + cx_dev->bt); } static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf, @@ -488,11 +491,12 @@ static int __init tiocx_init(void) for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) { nasid_t nasid; + int bt; if ((nasid = cnodeid_to_nasid(cnodeid)) < 0) break; /* No more nasids .. bail out of loop */ - if ((nasid & 0x1) && is_fpga_brick(nasid)) { + if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) { struct hubdev_info *hubdev; struct xwidget_info *widgetp; @@ -512,7 +516,7 @@ static int __init tiocx_init(void) if (cx_device_register (nasid, widgetp->xwi_hwid.part_num, - widgetp->xwi_hwid.mfg_num, hubdev) < 0) + widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0) return -ENXIO; else found_tiocx_device++; diff --git a/include/asm-ia64/sn/l1.h b/include/asm-ia64/sn/l1.h index 2e5f0aa38889..e3b819110d47 100644 --- a/include/asm-ia64/sn/l1.h +++ b/include/asm-ia64/sn/l1.h @@ -35,4 +35,16 @@ #define L1_BRICKTYPE_ATHENA 0x2b /* + */ #define L1_BRICKTYPE_DAYTONA 0x7a /* z */ +/* board type response codes */ +#define L1_BOARDTYPE_IP69 0x0100 /* CA */ +#define L1_BOARDTYPE_IP63 0x0200 /* CB */ +#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */ +#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */ +#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */ +#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */ +#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */ +#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */ +#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */ + + #endif /* _ASM_IA64_SN_L1_H */ diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index e67825ad1930..6f96ae8b4fbe 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -47,6 +47,7 @@ #define SN_SAL_CONSOLE_PUTB 0x02000028 #define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a #define SN_SAL_CONSOLE_READC 0x0200002b +#define SN_SAL_SYSCTL_OP 0x02000030 #define SN_SAL_SYSCTL_MODID_GET 0x02000031 #define SN_SAL_SYSCTL_GET 0x02000032 #define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033 @@ -97,6 +98,13 @@ #define SAL_INTR_ALLOC 1 #define SAL_INTR_FREE 2 +/* + * operations available on the generic SN_SAL_SYSCTL_OP + * runtime service + */ +#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */ +#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */ + /* * IRouter (i.e. generalized system controller) operations */ @@ -876,6 +884,41 @@ ia64_sn_sysctl_event_init(nasid_t nasid) return (int) rv.v0; } +/* + * Ask the system controller on the specified nasid to reset + * the CX corelet clock. Only valid on TIO nodes. + */ +static inline int +ia64_sn_sysctl_tio_clock_reset(nasid_t nasid) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST, + nasid, 0, 0, 0, 0, 0); + if (rv.status != 0) + return (int)rv.status; + if (rv.v0 != 0) + return (int)rv.v0; + + return 0; +} + +/* + * Get the associated ioboard type for a given nasid. + */ +static inline int +ia64_sn_sysctl_ioboard_get(nasid_t nasid) +{ + struct ia64_sal_retval rv; + SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD, + nasid, 0, 0, 0, 0, 0); + if (rv.v0 != 0) + return (int)rv.v0; + if (rv.v1 != 0) + return (int)rv.v1; + + return 0; +} + /** * ia64_sn_get_fit_compt - read a FIT entry from the PROM header * @nasid: NASID of node to read diff --git a/include/asm-ia64/sn/tiocx.h b/include/asm-ia64/sn/tiocx.h index c5447a504509..5699e75e5024 100644 --- a/include/asm-ia64/sn/tiocx.h +++ b/include/asm-ia64/sn/tiocx.h @@ -19,6 +19,7 @@ struct cx_id_s { struct cx_dev { struct cx_id_s cx_id; + int bt; /* board/blade type */ void *soft; /* driver specific */ struct hubdev_info *hubdev; struct device dev; @@ -59,7 +60,7 @@ struct cx_drv { extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int); extern void tiocx_irq_free(struct sn_irq_info *); extern int cx_device_unregister(struct cx_dev *); -extern int cx_device_register(nasid_t, int, int, struct hubdev_info *); +extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int); extern int cx_driver_unregister(struct cx_drv *); extern int cx_driver_register(struct cx_drv *); extern uint64_t tiocx_dma_addr(uint64_t addr); -- GitLab From a607c38971fd078865fa9bef39e6c1d4435680c8 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Thu, 1 Sep 2005 14:01:37 -0500 Subject: [PATCH 0014/1519] [IA64-SGI] get XPC to cleanly disengage from remote memory references When XPC is being shutdown (i.e., rmmod, reboot) it doesn't ensure that other partitions with whom it was connected have completely disengaged from any attempt at cross-partition memory references. This can lead to MCAs in any of these other partitions when the partition is reset. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc.h | 288 +++++++++++++++++++++++--- arch/ia64/sn/kernel/xpc_channel.c | 216 +++++++++++--------- arch/ia64/sn/kernel/xpc_main.c | 242 ++++++++++++++++------ arch/ia64/sn/kernel/xpc_partition.c | 304 +++++++++++++++++++++++----- include/asm-ia64/sn/xp.h | 10 +- 5 files changed, 822 insertions(+), 238 deletions(-) diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index d0ee635daf2e..565822ab3d08 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -57,7 +57,7 @@ #define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2) #define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */ -#define XPC_HB_CHECK_DEFAULT_TIMEOUT 20 /* check HB every x secs */ +#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */ /* define the process name of HB checker and the CPU it is pinned to */ #define XPC_HB_CHECK_THREAD_NAME "xpc_hb" @@ -67,11 +67,6 @@ #define XPC_DISCOVERY_THREAD_NAME "xpc_discovery" -#define XPC_HB_ALLOWED(_p, _v) ((_v)->heartbeating_to_mask & (1UL << (_p))) -#define XPC_ALLOW_HB(_p, _v) (_v)->heartbeating_to_mask |= (1UL << (_p)) -#define XPC_DISALLOW_HB(_p, _v) (_v)->heartbeating_to_mask &= (~(1UL << (_p))) - - /* * Reserved Page provided by SAL. * @@ -88,14 +83,38 @@ struct xpc_rsvd_page { u8 version; u8 pad[6]; /* pad to u64 align */ volatile u64 vars_pa; + struct timespec stamp; /* time when reserved page was initialized */ u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; }; -#define XPC_RP_VERSION _XPC_VERSION(1,0) /* version 1.0 of the reserved page */ #define XPC_RSVD_PAGE_ALIGNED_SIZE \ (L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))) +#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */ + +#define XPC_SUPPORTS_RP_STAMP(_version) \ + (_version >= _XPC_VERSION(1,1)) + +/* + * compare stamps - the return value is: + * + * < 0, if stamp1 < stamp2 + * = 0, if stamp1 == stamp2 + * > 0, if stamp1 > stamp2 + */ +static inline int +xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2) +{ + int ret; + + + if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) { + ret = stamp1->tv_nsec - stamp2->tv_nsec; + } + return ret; +} + /* * Define the structures by which XPC variables can be exported to other @@ -121,12 +140,61 @@ struct xpc_vars { u64 vars_part_pa; u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */ AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ - AMO_t *act_amos; /* pointer to the first activation AMO */ }; -#define XPC_V_VERSION _XPC_VERSION(3,0) /* version 3.0 of the cross vars */ #define XPC_VARS_ALIGNED_SIZE (L1_CACHE_ALIGN(sizeof(struct xpc_vars))) +#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */ + +#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ + (_version >= _XPC_VERSION(3,1)) + + +static inline int +xpc_hb_allowed(partid_t partid, struct xpc_vars *vars) +{ + return ((vars->heartbeating_to_mask & (1UL << partid)) != 0); +} + +static inline void +xpc_allow_hb(partid_t partid, struct xpc_vars *vars) +{ + u64 old_mask, new_mask; + + do { + old_mask = vars->heartbeating_to_mask; + new_mask = (old_mask | (1UL << partid)); + } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != + old_mask); +} + +static inline void +xpc_disallow_hb(partid_t partid, struct xpc_vars *vars) +{ + u64 old_mask, new_mask; + + do { + old_mask = vars->heartbeating_to_mask; + new_mask = (old_mask & ~(1UL << partid)); + } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != + old_mask); +} + + +/* + * The AMOs page consists of a number of AMO variables which are divided into + * four groups, The first two groups are used to identify an IRQ's sender. + * These two groups consist of 64 and 16 AMO variables respectively. The last + * two groups, consisting of just one AMO variable each, are used to identify + * the remote partitions that are currently engaged (from the viewpoint of + * the XPC running on the remote partition). + */ +#define XPC_NOTIFY_IRQ_AMOS 0 +#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS) +#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) +#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) + + /* * The following structure describes the per partition specific variables. * @@ -358,7 +426,7 @@ struct xpc_channel { void *key; /* pointer to user's key */ struct semaphore msg_to_pull_sema; /* next msg to pull serialization */ - struct semaphore teardown_sema; /* wait for teardown completion */ + struct semaphore wdisconnect_sema; /* wait for channel disconnect */ struct xpc_openclose_args *local_openclose_args; /* args passed on */ /* opening or closing of channel */ @@ -410,6 +478,7 @@ struct xpc_channel { #define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */ #define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */ +#define XPC_C_WDISCONNECT 0x00008000 /* waiting for channel disconnect */ @@ -422,6 +491,8 @@ struct xpc_partition { /* XPC HB infrastructure */ + u8 remote_rp_version; /* version# of partition's rsvd pg */ + struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */ u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ u64 remote_vars_pa; /* phys addr of partition's vars */ u64 remote_vars_part_pa; /* phys addr of partition's vars part */ @@ -432,10 +503,14 @@ struct xpc_partition { u32 act_IRQ_rcvd; /* IRQs since activation */ spinlock_t act_lock; /* protect updating of act_state */ u8 act_state; /* from XPC HB viewpoint */ + u8 remote_vars_version; /* version# of partition's vars */ enum xpc_retval reason; /* reason partition is deactivating */ int reason_line; /* line# deactivation initiated from */ int reactivate_nasid; /* nasid in partition to reactivate */ + unsigned long disengage_request_timeout; /* timeout in XPC_TICKS */ + struct timer_list disengage_request_timer; + /* XPC infrastructure referencing and teardown control */ @@ -454,6 +529,7 @@ struct xpc_partition { u8 nchannels; /* #of defined channels supported */ atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */ + atomic_t nchannels_engaged;/* #of channels engaged with remote part */ struct xpc_channel *channels;/* array of channel structures */ void *local_GPs_base; /* base address of kmalloc'd space */ @@ -518,6 +594,7 @@ struct xpc_partition { #define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */ + /* * struct xpc_partition IPI_timer #of seconds to wait before checking for * dropped IPIs. These occur whenever an IPI amo write doesn't complete until @@ -526,6 +603,13 @@ struct xpc_partition { #define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ) +/* number of seconds to wait for other partitions to disengage */ +#define XPC_DISENGAGE_REQUEST_TIMELIMIT 90 + +/* interval in seconds to print 'waiting disengagement' messages */ +#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10 + + #define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0])) @@ -550,8 +634,6 @@ extern void xpc_activate_partition(struct xpc_partition *); /* found in xpc_partition.c */ extern int xpc_exiting; -extern int xpc_hb_interval; -extern int xpc_hb_check_interval; extern struct xpc_vars *xpc_vars; extern struct xpc_rsvd_page *xpc_rsvd_page; extern struct xpc_vars_part *xpc_vars_part; @@ -561,6 +643,7 @@ extern struct xpc_rsvd_page *xpc_rsvd_page_init(void); extern void xpc_allow_IPI_ops(void); extern void xpc_restrict_IPI_ops(void); extern int xpc_identify_act_IRQ_sender(void); +extern int xpc_partition_disengaged(struct xpc_partition *); extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *); extern void xpc_mark_partition_inactive(struct xpc_partition *); extern void xpc_discovery(void); @@ -585,8 +668,8 @@ extern void xpc_connected_callout(struct xpc_channel *); extern void xpc_deliver_msg(struct xpc_channel *); extern void xpc_disconnect_channel(const int, struct xpc_channel *, enum xpc_retval, unsigned long *); -extern void xpc_disconnected_callout(struct xpc_channel *); -extern void xpc_partition_down(struct xpc_partition *, enum xpc_retval); +extern void xpc_disconnecting_callout(struct xpc_channel *); +extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval); extern void xpc_teardown_infrastructure(struct xpc_partition *); @@ -673,6 +756,157 @@ xpc_part_ref(struct xpc_partition *part) +/* + * This next set of inlines are used to keep track of when a partition is + * potentially engaged in accessing memory belonging to another partition. + */ + +static inline void +xpc_mark_partition_engaged(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t))); + + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_mark_partition_disengaged(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t))); + + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_request_partition_disengage(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + + (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); + + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_cancel_partition_disengage_request(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + + (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); + + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline u64 +xpc_partition_engaged(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + + + /* return our partition's AMO variable ANDed with partid_mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) & + partid_mask); +} + +static inline u64 +xpc_partition_disengage_requested(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + + + /* return our partition's AMO variable ANDed with partid_mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) & + partid_mask); +} + +static inline void +xpc_clear_partition_engaged(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + + + /* clear bit(s) based on partid_mask in our partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, + ~partid_mask); +} + +static inline void +xpc_clear_partition_disengage_request(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + + + /* clear bit(s) based on partid_mask in our partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, + ~partid_mask); +} + + + /* * The following set of macros and inlines are used for the sending and * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, @@ -722,13 +956,13 @@ xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) * Flag the appropriate AMO variable and send an IPI to the specified node. */ static inline void -xpc_activate_IRQ_send(u64 amos_page, int from_nasid, int to_nasid, +xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid, int to_phys_cpuid) { int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); - AMO_t *amos = (AMO_t *) __va(amos_page + - (XP_MAX_PARTITIONS * sizeof(AMO_t))); + AMO_t *amos = (AMO_t *) __va(amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); (void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid, @@ -756,6 +990,13 @@ xpc_IPI_send_reactivate(struct xpc_partition *part) xpc_vars->act_nasid, xpc_vars->act_phys_cpuid); } +static inline void +xpc_IPI_send_disengage(struct xpc_partition *part) +{ + xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), + part->remote_act_nasid, part->remote_act_phys_cpuid); +} + /* * IPIs associated with SGI_XPC_NOTIFY IRQ. @@ -903,17 +1144,18 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) * cacheable mapping for the entire region. This will prevent speculative * reading of cached copies of our lines from being issued which will cause * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * (XP_MAX_PARTITIONS) AMO variables for message notification (xpc_main.c) - * and an additional 16 AMO variables for partition activation (xpc_hb.c). + * (XP_MAX_PARTITIONS) AMO variables for message notification and an + * additional 16 (XP_NASID_MASK_WORDS) AMO variables for partition activation + * and 2 AMO variables for partition deactivation. */ static inline AMO_t * -xpc_IPI_init(partid_t partid) +xpc_IPI_init(int index) { - AMO_t *part_amo = xpc_vars->amos_page + partid; + AMO_t *amo = xpc_vars->amos_page + index; - xpc_IPI_receive(part_amo); - return part_amo; + (void) xpc_IPI_receive(amo); /* clear AMO variable */ + return amo; } diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index 94698bea7be0..195ac1b8e262 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -57,6 +57,7 @@ xpc_initialize_channels(struct xpc_partition *part, partid_t partid) spin_lock_init(&ch->lock); sema_init(&ch->msg_to_pull_sema, 1); /* mutex */ + sema_init(&ch->wdisconnect_sema, 0); /* event wait */ atomic_set(&ch->n_on_msg_allocate_wq, 0); init_waitqueue_head(&ch->msg_allocate_wq); @@ -166,6 +167,7 @@ xpc_setup_infrastructure(struct xpc_partition *part) xpc_initialize_channels(part, partid); atomic_set(&part->nchannels_active, 0); + atomic_set(&part->nchannels_engaged, 0); /* local_IPI_amo were set to 0 by an earlier memset() */ @@ -555,8 +557,6 @@ xpc_allocate_msgqueues(struct xpc_channel *ch) sema_init(&ch->notify_queue[i].sema, 0); } - sema_init(&ch->teardown_sema, 0); /* event wait */ - spin_lock_irqsave(&ch->lock, irq_flags); ch->flags |= XPC_C_SETUP; spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -625,6 +625,55 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) } +/* + * Notify those who wanted to be notified upon delivery of their message. + */ +static void +xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put) +{ + struct xpc_notify *notify; + u8 notify_type; + s64 get = ch->w_remote_GP.get - 1; + + + while (++get < put && atomic_read(&ch->n_to_notify) > 0) { + + notify = &ch->notify_queue[get % ch->local_nentries]; + + /* + * See if the notify entry indicates it was associated with + * a message who's sender wants to be notified. It is possible + * that it is, but someone else is doing or has done the + * notification. + */ + notify_type = notify->type; + if (notify_type == 0 || + cmpxchg(¬ify->type, notify_type, 0) != + notify_type) { + continue; + } + + DBUG_ON(notify_type != XPC_N_CALL); + + atomic_dec(&ch->n_to_notify); + + if (notify->func != NULL) { + dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", + (void *) notify, get, ch->partid, ch->number); + + notify->func(reason, ch->partid, ch->number, + notify->key); + + dev_dbg(xpc_chan, "notify->func() returned, " + "notify=0x%p, msg_number=%ld, partid=%d, " + "channel=%d\n", (void *) notify, get, + ch->partid, ch->number); + } + } +} + + /* * Free up message queues and other stuff that were allocated for the specified * channel. @@ -669,9 +718,6 @@ xpc_free_msgqueues(struct xpc_channel *ch) ch->remote_msgqueue = NULL; kfree(ch->notify_queue); ch->notify_queue = NULL; - - /* in case someone is waiting for the teardown to complete */ - up(&ch->teardown_sema); } } @@ -683,7 +729,7 @@ static void xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) { struct xpc_partition *part = &xpc_partitions[ch->partid]; - u32 ch_flags = ch->flags; + u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED); DBUG_ON(!spin_is_locked(&ch->lock)); @@ -701,12 +747,13 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) } DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0); - /* it's now safe to free the channel's message queues */ - - xpc_free_msgqueues(ch); - DBUG_ON(ch->flags & XPC_C_SETUP); + if (part->act_state == XPC_P_DEACTIVATING) { + /* can't proceed until the other side disengages from us */ + if (xpc_partition_engaged(1UL << ch->partid)) { + return; + } - if (part->act_state != XPC_P_DEACTIVATING) { + } else { /* as long as the other side is up do the full protocol */ @@ -724,16 +771,33 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) } } + /* wake those waiting for notify completion */ + if (atomic_read(&ch->n_to_notify) > 0) { + /* >>> we do callout while holding ch->lock */ + xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put); + } + /* both sides are disconnected now */ - ch->flags = XPC_C_DISCONNECTED; /* clear all flags, but this one */ + /* it's now safe to free the channel's message queues */ + xpc_free_msgqueues(ch); + + /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */ + ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT)); atomic_dec(&part->nchannels_active); - if (ch_flags & XPC_C_WASCONNECTED) { + if (channel_was_connected) { dev_info(xpc_chan, "channel %d to partition %d disconnected, " "reason=%d\n", ch->number, ch->partid, ch->reason); } + + /* wake the thread that is waiting for this channel to disconnect */ + if (ch->flags & XPC_C_WDISCONNECT) { + spin_unlock_irqrestore(&ch->lock, *irq_flags); + up(&ch->wdisconnect_sema); + spin_lock_irqsave(&ch->lock, *irq_flags); + } } @@ -764,7 +828,7 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, /* * If RCLOSEREQUEST is set, we're probably waiting for * RCLOSEREPLY. We should find it and a ROPENREQUEST packed - * with this RCLOSEQREUQEST in the IPI_flags. + * with this RCLOSEREQUEST in the IPI_flags. */ if (ch->flags & XPC_C_RCLOSEREQUEST) { @@ -852,7 +916,7 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, "channel=%d\n", args->msg_size, args->local_nentries, ch->partid, ch->number); - if ((ch->flags & XPC_C_DISCONNECTING) || + if ((ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) || part->act_state == XPC_P_DEACTIVATING) { spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -1039,55 +1103,6 @@ xpc_connect_channel(struct xpc_channel *ch) } -/* - * Notify those who wanted to be notified upon delivery of their message. - */ -static void -xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put) -{ - struct xpc_notify *notify; - u8 notify_type; - s64 get = ch->w_remote_GP.get - 1; - - - while (++get < put && atomic_read(&ch->n_to_notify) > 0) { - - notify = &ch->notify_queue[get % ch->local_nentries]; - - /* - * See if the notify entry indicates it was associated with - * a message who's sender wants to be notified. It is possible - * that it is, but someone else is doing or has done the - * notification. - */ - notify_type = notify->type; - if (notify_type == 0 || - cmpxchg(¬ify->type, notify_type, 0) != - notify_type) { - continue; - } - - DBUG_ON(notify_type != XPC_N_CALL); - - atomic_dec(&ch->n_to_notify); - - if (notify->func != NULL) { - dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", - (void *) notify, get, ch->partid, ch->number); - - notify->func(reason, ch->partid, ch->number, - notify->key); - - dev_dbg(xpc_chan, "notify->func() returned, " - "notify=0x%p, msg_number=%ld, partid=%d, " - "channel=%d\n", (void *) notify, get, - ch->partid, ch->number); - } - } -} - - /* * Clear some of the msg flags in the local message queue. */ @@ -1240,6 +1255,7 @@ xpc_process_channel_activity(struct xpc_partition *part) u64 IPI_amo, IPI_flags; struct xpc_channel *ch; int ch_number; + u32 ch_flags; IPI_amo = xpc_get_IPI_flags(part); @@ -1266,8 +1282,9 @@ xpc_process_channel_activity(struct xpc_partition *part) xpc_process_openclose_IPI(part, ch_number, IPI_flags); } + ch_flags = ch->flags; /* need an atomic snapshot of flags */ - if (ch->flags & XPC_C_DISCONNECTING) { + if (ch_flags & XPC_C_DISCONNECTING) { spin_lock_irqsave(&ch->lock, irq_flags); xpc_process_disconnect(ch, &irq_flags); spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -1278,9 +1295,9 @@ xpc_process_channel_activity(struct xpc_partition *part) continue; } - if (!(ch->flags & XPC_C_CONNECTED)) { - if (!(ch->flags & XPC_C_OPENREQUEST)) { - DBUG_ON(ch->flags & XPC_C_SETUP); + if (!(ch_flags & XPC_C_CONNECTED)) { + if (!(ch_flags & XPC_C_OPENREQUEST)) { + DBUG_ON(ch_flags & XPC_C_SETUP); (void) xpc_connect_channel(ch); } else { spin_lock_irqsave(&ch->lock, irq_flags); @@ -1305,8 +1322,8 @@ xpc_process_channel_activity(struct xpc_partition *part) /* - * XPC's heartbeat code calls this function to inform XPC that a partition has - * gone down. XPC responds by tearing down the XPartition Communication + * XPC's heartbeat code calls this function to inform XPC that a partition is + * going down. XPC responds by tearing down the XPartition Communication * infrastructure used for the just downed partition. * * XPC's heartbeat code will never call this function and xpc_partition_up() @@ -1314,7 +1331,7 @@ xpc_process_channel_activity(struct xpc_partition *part) * at the same time. */ void -xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason) +xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason) { unsigned long irq_flags; int ch_number; @@ -1330,12 +1347,11 @@ xpc_partition_down(struct xpc_partition *part, enum xpc_retval reason) } - /* disconnect all channels associated with the downed partition */ + /* disconnect channels associated with the partition going down */ for (ch_number = 0; ch_number < part->nchannels; ch_number++) { ch = &part->channels[ch_number]; - xpc_msgqueue_ref(ch); spin_lock_irqsave(&ch->lock, irq_flags); @@ -1370,6 +1386,7 @@ xpc_teardown_infrastructure(struct xpc_partition *part) * this partition. */ + DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); DBUG_ON(atomic_read(&part->nchannels_active) != 0); DBUG_ON(part->setup_state != XPC_P_SETUP); part->setup_state = XPC_P_WTEARDOWN; @@ -1506,8 +1523,12 @@ xpc_initiate_disconnect(int ch_number) spin_lock_irqsave(&ch->lock, irq_flags); - XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering, + if (!(ch->flags & XPC_C_DISCONNECTED)) { + ch->flags |= XPC_C_WDISCONNECT; + + XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering, &irq_flags); + } spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -1523,8 +1544,9 @@ xpc_initiate_disconnect(int ch_number) /* * To disconnect a channel, and reflect it back to all who may be waiting. * - * >>> An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by - * >>> xpc_free_msgqueues(). + * An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by + * xpc_process_disconnect(), and if set, XPC_C_WDISCONNECT is cleared by + * xpc_disconnect_wait(). * * THE CHANNEL IS TO BE LOCKED BY THE CALLER AND WILL REMAIN LOCKED UPON RETURN. */ @@ -1532,7 +1554,7 @@ void xpc_disconnect_channel(const int line, struct xpc_channel *ch, enum xpc_retval reason, unsigned long *irq_flags) { - u32 flags; + u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED); DBUG_ON(!spin_is_locked(&ch->lock)); @@ -1547,61 +1569,53 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch, XPC_SET_REASON(ch, reason, line); - flags = ch->flags; + ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING); /* some of these may not have been set */ ch->flags &= ~(XPC_C_OPENREQUEST | XPC_C_OPENREPLY | XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY | XPC_C_CONNECTING | XPC_C_CONNECTED); - ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING); xpc_IPI_send_closerequest(ch, irq_flags); - if (flags & XPC_C_CONNECTED) { + if (channel_was_connected) { ch->flags |= XPC_C_WASCONNECTED; } + spin_unlock_irqrestore(&ch->lock, *irq_flags); + + /* wake all idle kthreads so they can exit */ if (atomic_read(&ch->kthreads_idle) > 0) { - /* wake all idle kthreads so they can exit */ wake_up_all(&ch->idle_wq); } - spin_unlock_irqrestore(&ch->lock, *irq_flags); - - /* wake those waiting to allocate an entry from the local msg queue */ - if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) { wake_up(&ch->msg_allocate_wq); } - /* wake those waiting for notify completion */ - - if (atomic_read(&ch->n_to_notify) > 0) { - xpc_notify_senders(ch, reason, ch->w_local_GP.put); - } - spin_lock_irqsave(&ch->lock, *irq_flags); } void -xpc_disconnected_callout(struct xpc_channel *ch) +xpc_disconnecting_callout(struct xpc_channel *ch) { /* - * Let the channel's registerer know that the channel is now + * Let the channel's registerer know that the channel is being * disconnected. We don't want to do this if the registerer was never - * informed of a connection being made, unless the disconnect was for - * abnormal reasons. + * informed of a connection being made. */ if (ch->func != NULL) { - dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, " - "channel=%d\n", ch->reason, ch->partid, ch->number); + dev_dbg(xpc_chan, "ch->func() called, reason=xpcDisconnecting," + " partid=%d, channel=%d\n", ch->partid, ch->number); - ch->func(ch->reason, ch->partid, ch->number, NULL, ch->key); + ch->func(xpcDisconnecting, ch->partid, ch->number, NULL, + ch->key); - dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, " - "channel=%d\n", ch->reason, ch->partid, ch->number); + dev_dbg(xpc_chan, "ch->func() returned, reason=" + "xpcDisconnecting, partid=%d, channel=%d\n", + ch->partid, ch->number); } } @@ -1848,7 +1862,7 @@ xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, xpc_notify_func func, void *key) { enum xpc_retval ret = xpcSuccess; - struct xpc_notify *notify = NULL; // >>> to keep the compiler happy!! + struct xpc_notify *notify = notify; s64 put, msg_number = msg->number; diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index bb1d5cf30440..feece200b3c3 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -54,6 +54,7 @@ #include #include #include +#include #include #include #include @@ -82,11 +83,13 @@ struct device *xpc_chan = &xpc_chan_dbg_subname; /* systune related variables for /proc/sys directories */ -static int xpc_hb_min = 1; -static int xpc_hb_max = 10; +static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; +static int xpc_hb_min_interval = 1; +static int xpc_hb_max_interval = 10; -static int xpc_hb_check_min = 10; -static int xpc_hb_check_max = 120; +static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; +static int xpc_hb_check_min_interval = 10; +static int xpc_hb_check_max_interval = 120; static ctl_table xpc_sys_xpc_hb_dir[] = { { @@ -99,7 +102,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = { &proc_dointvec_minmax, &sysctl_intvec, NULL, - &xpc_hb_min, &xpc_hb_max + &xpc_hb_min_interval, + &xpc_hb_max_interval }, { 2, @@ -111,7 +115,8 @@ static ctl_table xpc_sys_xpc_hb_dir[] = { &proc_dointvec_minmax, &sysctl_intvec, NULL, - &xpc_hb_check_min, &xpc_hb_check_max + &xpc_hb_check_min_interval, + &xpc_hb_check_max_interval }, {0} }; @@ -148,11 +153,11 @@ static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); static unsigned long xpc_hb_check_timeout; -/* xpc_hb_checker thread exited notification */ -static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited); +/* used as an indication of when the xpc_hb_checker thread is inactive */ +static DECLARE_MUTEX_LOCKED(xpc_hb_checker_inactive); -/* xpc_discovery thread exited notification */ -static DECLARE_MUTEX_LOCKED(xpc_discovery_exited); +/* used as an indication of when the xpc_discovery thread is inactive */ +static DECLARE_MUTEX_LOCKED(xpc_discovery_inactive); static struct timer_list xpc_hb_timer; @@ -161,6 +166,30 @@ static struct timer_list xpc_hb_timer; static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); +static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); +static struct notifier_block xpc_reboot_notifier = { + .notifier_call = xpc_system_reboot, +}; + + +/* + * Timer function to enforce the timelimit on the partition disengage request. + */ +static void +xpc_timeout_partition_disengage_request(unsigned long data) +{ + struct xpc_partition *part = (struct xpc_partition *) data; + + + DBUG_ON(XPC_TICKS < part->disengage_request_timeout); + + (void) xpc_partition_disengaged(part); + + DBUG_ON(part->disengage_request_timeout != 0); + DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); +} + + /* * Notify the heartbeat check thread that an IRQ has been received. */ @@ -214,12 +243,6 @@ xpc_hb_checker(void *ignore) while (!(volatile int) xpc_exiting) { - /* wait for IRQ or timeout */ - (void) wait_event_interruptible(xpc_act_IRQ_wq, - (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) || - jiffies >= xpc_hb_check_timeout || - (volatile int) xpc_exiting)); - dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " "been received\n", (int) (xpc_hb_check_timeout - jiffies), @@ -240,6 +263,7 @@ xpc_hb_checker(void *ignore) } + /* check for outstanding IRQs */ new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd); if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { force_IRQ = 0; @@ -257,13 +281,19 @@ xpc_hb_checker(void *ignore) xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); } + + /* wait for IRQ or timeout */ + (void) wait_event_interruptible(xpc_act_IRQ_wq, + (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) || + jiffies >= xpc_hb_check_timeout || + (volatile int) xpc_exiting)); } dev_dbg(xpc_part, "heartbeat checker is exiting\n"); /* mark this thread as inactive */ - up(&xpc_hb_checker_exited); + up(&xpc_hb_checker_inactive); return 0; } @@ -283,7 +313,7 @@ xpc_initiate_discovery(void *ignore) dev_dbg(xpc_part, "discovery thread is exiting\n"); /* mark this thread as inactive */ - up(&xpc_discovery_exited); + up(&xpc_discovery_inactive); return 0; } @@ -309,7 +339,7 @@ xpc_make_first_contact(struct xpc_partition *part) "partition %d\n", XPC_PARTID(part)); /* wait a 1/4 of a second or so */ - msleep_interruptible(250); + (void) msleep_interruptible(250); if (part->act_state == XPC_P_DEACTIVATING) { return part->reason; @@ -336,7 +366,8 @@ static void xpc_channel_mgr(struct xpc_partition *part) { while (part->act_state != XPC_P_DEACTIVATING || - atomic_read(&part->nchannels_active) > 0) { + atomic_read(&part->nchannels_active) > 0 || + !xpc_partition_disengaged(part)) { xpc_process_channel_activity(part); @@ -360,7 +391,8 @@ xpc_channel_mgr(struct xpc_partition *part) (volatile u64) part->local_IPI_amo != 0 || ((volatile u8) part->act_state == XPC_P_DEACTIVATING && - atomic_read(&part->nchannels_active) == 0))); + atomic_read(&part->nchannels_active) == 0 && + xpc_partition_disengaged(part)))); atomic_set(&part->channel_mgr_requests, 1); // >>> Does it need to wakeup periodically as well? In case we @@ -482,7 +514,7 @@ xpc_activating(void *__partid) return 0; } - XPC_ALLOW_HB(partid, xpc_vars); + xpc_allow_hb(partid, xpc_vars); xpc_IPI_send_activated(part); @@ -492,6 +524,7 @@ xpc_activating(void *__partid) */ (void) xpc_partition_up(part); + xpc_disallow_hb(partid, xpc_vars); xpc_mark_partition_inactive(part); if (part->reason == xpcReactivating) { @@ -704,11 +737,14 @@ xpc_daemonize_kthread(void *args) xpc_kthread_waitmsgs(part, ch); } - if (atomic_dec_return(&ch->kthreads_assigned) == 0 && - ((ch->flags & XPC_C_CONNECTCALLOUT) || - (ch->reason != xpcUnregistering && - ch->reason != xpcOtherUnregistering))) { - xpc_disconnected_callout(ch); + if (atomic_dec_return(&ch->kthreads_assigned) == 0) { + if (ch->flags & XPC_C_CONNECTCALLOUT) { + xpc_disconnecting_callout(ch); + } + if (atomic_dec_return(&part->nchannels_engaged) == 0) { + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } } @@ -740,6 +776,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) unsigned long irq_flags; pid_t pid; u64 args = XPC_PACK_ARGS(ch->partid, ch->number); + struct xpc_partition *part = &xpc_partitions[ch->partid]; while (needed-- > 0) { @@ -770,9 +807,13 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) * kthread. That kthread is responsible for doing the * counterpart to the following before it exits. */ - (void) xpc_part_ref(&xpc_partitions[ch->partid]); + (void) xpc_part_ref(part); xpc_msgqueue_ref(ch); - atomic_inc(&ch->kthreads_assigned); + if (atomic_inc_return(&ch->kthreads_assigned) == 1) { + if (atomic_inc_return(&part->nchannels_engaged) == 1) { + xpc_mark_partition_engaged(part); + } + } ch->kthreads_created++; // >>> temporary debug only!!! } } @@ -781,6 +822,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) void xpc_disconnect_wait(int ch_number) { + unsigned long irq_flags; partid_t partid; struct xpc_partition *part; struct xpc_channel *ch; @@ -793,10 +835,13 @@ xpc_disconnect_wait(int ch_number) if (xpc_part_ref(part)) { ch = &part->channels[ch_number]; -// >>> how do we keep from falling into the window between our check and going -// >>> down and coming back up where sema is re-inited? - if (ch->flags & XPC_C_SETUP) { - (void) down(&ch->teardown_sema); + if (ch->flags & XPC_C_WDISCONNECT) { + if (!(ch->flags & XPC_C_DISCONNECTED)) { + (void) down(&ch->wdisconnect_sema); + } + spin_lock_irqsave(&ch->lock, irq_flags); + ch->flags &= ~XPC_C_WDISCONNECT; + spin_unlock_irqrestore(&ch->lock, irq_flags); } xpc_part_deref(part); @@ -806,62 +851,89 @@ xpc_disconnect_wait(int ch_number) static void -xpc_do_exit(void) +xpc_do_exit(enum xpc_retval reason) { partid_t partid; int active_part_count; struct xpc_partition *part; + unsigned long printmsg_time; - /* now it's time to eliminate our heartbeat */ - del_timer_sync(&xpc_hb_timer); - xpc_vars->heartbeating_to_mask = 0; - - /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->vars_pa = 0; + /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ + DBUG_ON(xpc_exiting == 1); /* - * Ignore all incoming interrupts. Without interupts the heartbeat - * checker won't activate any new partitions that may come up. - */ - free_irq(SGI_XPC_ACTIVATE, NULL); - - /* - * Cause the heartbeat checker and the discovery threads to exit. - * We don't want them attempting to activate new partitions as we - * try to deactivate the existing ones. + * Let the heartbeat checker thread and the discovery thread + * (if one is running) know that they should exit. Also wake up + * the heartbeat checker thread in case it's sleeping. */ xpc_exiting = 1; wake_up_interruptible(&xpc_act_IRQ_wq); - /* wait for the heartbeat checker thread to mark itself inactive */ - down(&xpc_hb_checker_exited); + /* ignore all incoming interrupts */ + free_irq(SGI_XPC_ACTIVATE, NULL); /* wait for the discovery thread to mark itself inactive */ - down(&xpc_discovery_exited); + down(&xpc_discovery_inactive); + + /* wait for the heartbeat checker thread to mark itself inactive */ + down(&xpc_hb_checker_inactive); - msleep_interruptible(300); + /* sleep for a 1/3 of a second or so */ + (void) msleep_interruptible(300); /* wait for all partitions to become inactive */ + printmsg_time = jiffies; + do { active_part_count = 0; for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { part = &xpc_partitions[partid]; - if (part->act_state != XPC_P_INACTIVE) { - active_part_count++; - - XPC_DEACTIVATE_PARTITION(part, xpcUnloading); + if (xpc_partition_disengaged(part) && + part->act_state == XPC_P_INACTIVE) { + continue; } + + active_part_count++; + + XPC_DEACTIVATE_PARTITION(part, reason); + } + + if (active_part_count == 0) { + break; + } + + if (jiffies >= printmsg_time) { + dev_info(xpc_part, "waiting for partitions to " + "deactivate/disengage, active count=%d, remote " + "engaged=0x%lx\n", active_part_count, + xpc_partition_engaged(1UL << partid)); + + printmsg_time = jiffies + + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); } - if (active_part_count) - msleep_interruptible(300); - } while (active_part_count > 0); + /* sleep for a 1/3 of a second or so */ + (void) msleep_interruptible(300); + + } while (1); + + DBUG_ON(xpc_partition_engaged(-1UL)); + + + /* indicate to others that our reserved page is uninitialized */ + xpc_rsvd_page->vars_pa = 0; + + /* now it's time to eliminate our heartbeat */ + del_timer_sync(&xpc_hb_timer); + DBUG_ON(xpc_vars->heartbeating_to_mask == 0); + /* take ourselves off of the reboot_notifier_list */ + (void) unregister_reboot_notifier(&xpc_reboot_notifier); /* close down protections for IPI operations */ xpc_restrict_IPI_ops(); @@ -876,6 +948,34 @@ xpc_do_exit(void) } +/* + * This function is called when the system is being rebooted. + */ +static int +xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) +{ + enum xpc_retval reason; + + + switch (event) { + case SYS_RESTART: + reason = xpcSystemReboot; + break; + case SYS_HALT: + reason = xpcSystemHalt; + break; + case SYS_POWER_OFF: + reason = xpcSystemPoweroff; + break; + default: + reason = xpcSystemGoingDown; + } + + xpc_do_exit(reason); + return NOTIFY_DONE; +} + + int __init xpc_init(void) { @@ -920,6 +1020,12 @@ xpc_init(void) spin_lock_init(&part->act_lock); part->act_state = XPC_P_INACTIVE; XPC_SET_REASON(part, 0, 0); + + init_timer(&part->disengage_request_timer); + part->disengage_request_timer.function = + xpc_timeout_partition_disengage_request; + part->disengage_request_timer.data = (unsigned long) part; + part->setup_state = XPC_P_UNSET; init_waitqueue_head(&part->teardown_wq); atomic_set(&part->references, 0); @@ -976,6 +1082,13 @@ xpc_init(void) } + /* add ourselves to the reboot_notifier_list */ + ret = register_reboot_notifier(&xpc_reboot_notifier); + if (ret != 0) { + dev_warn(xpc_part, "can't register reboot notifier\n"); + } + + /* * Set the beating to other partitions into motion. This is * the last requirement for other partitions' discovery to @@ -997,6 +1110,9 @@ xpc_init(void) /* indicate to others that our reserved page is uninitialized */ xpc_rsvd_page->vars_pa = 0; + /* take ourselves off of the reboot_notifier_list */ + (void) unregister_reboot_notifier(&xpc_reboot_notifier); + del_timer_sync(&xpc_hb_timer); free_irq(SGI_XPC_ACTIVATE, NULL); xpc_restrict_IPI_ops(); @@ -1018,9 +1134,9 @@ xpc_init(void) dev_err(xpc_part, "failed while forking discovery thread\n"); /* mark this new thread as a non-starter */ - up(&xpc_discovery_exited); + up(&xpc_discovery_inactive); - xpc_do_exit(); + xpc_do_exit(xpcUnloading); return -EBUSY; } @@ -1039,7 +1155,7 @@ module_init(xpc_init); void __exit xpc_exit(void) { - xpc_do_exit(); + xpc_do_exit(xpcUnloading); } module_exit(xpc_exit); diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 578265ea9e67..79a0fc4c860c 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -76,11 +76,6 @@ char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE]; -/* systune related variables */ -int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; -int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_TIMEOUT; - - /* * Given a nasid, get the physical address of the partition's reserved page * for that nasid. This function returns 0 on any error. @@ -239,16 +234,21 @@ xpc_rsvd_page_init(void) xpc_vars->amos_page = amos_page; /* save for next load of XPC */ - /* - * Initialize the activation related AMO variables. - */ - xpc_vars->act_amos = xpc_IPI_init(XP_MAX_PARTITIONS); - for (i = 1; i < XP_NASID_MASK_WORDS; i++) { - xpc_IPI_init(i + XP_MAX_PARTITIONS); + /* initialize the activate IRQ related AMO variables */ + for (i = 0; i < XP_NASID_MASK_WORDS; i++) { + (void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); } + + /* initialize the engaged remote partitions related AMO variables */ + (void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); + (void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); + /* export AMO page's physical address to other partitions */ xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page); + /* timestamp of when reserved page was initialized */ + rp->stamp = CURRENT_TIME; + /* * This signifies to the remote partition that our reserved * page is initialized. @@ -387,6 +387,11 @@ xpc_check_remote_hb(void) remote_vars = (struct xpc_vars *) xpc_remote_copy_buffer; for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + + if (xpc_exiting) { + break; + } + if (partid == sn_partition_id) { continue; } @@ -417,7 +422,7 @@ xpc_check_remote_hb(void) if (((remote_vars->heartbeat == part->last_heartbeat) && (remote_vars->kdb_status == 0)) || - !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) { + !xpc_hb_allowed(sn_partition_id, remote_vars)) { XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat); continue; @@ -436,23 +441,23 @@ xpc_check_remote_hb(void) */ static enum xpc_retval xpc_get_remote_rp(int nasid, u64 *discovered_nasids, - struct xpc_rsvd_page *remote_rp, u64 *remote_rsvd_page_pa) + struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa) { int bres, i; /* get the reserved page's physical address */ - *remote_rsvd_page_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp, + *remote_rp_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp, XPC_RSVD_PAGE_ALIGNED_SIZE); - if (*remote_rsvd_page_pa == 0) { + if (*remote_rp_pa == 0) { return xpcNoRsvdPageAddr; } /* pull over the reserved page structure */ - bres = xp_bte_copy(*remote_rsvd_page_pa, ia64_tpa((u64) remote_rp), + bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp), XPC_RSVD_PAGE_ALIGNED_SIZE, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bres != BTE_SUCCESS) { @@ -523,6 +528,55 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) } +/* + * Update the remote partition's info. + */ +static void +xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version, + struct timespec *remote_rp_stamp, u64 remote_rp_pa, + u64 remote_vars_pa, struct xpc_vars *remote_vars) +{ + part->remote_rp_version = remote_rp_version; + dev_dbg(xpc_part, " remote_rp_version = 0x%016lx\n", + part->remote_rp_version); + + part->remote_rp_stamp = *remote_rp_stamp; + dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n", + part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec); + + part->remote_rp_pa = remote_rp_pa; + dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); + + part->remote_vars_pa = remote_vars_pa; + dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", + part->remote_vars_pa); + + part->last_heartbeat = remote_vars->heartbeat; + dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", + part->last_heartbeat); + + part->remote_vars_part_pa = remote_vars->vars_part_pa; + dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", + part->remote_vars_part_pa); + + part->remote_act_nasid = remote_vars->act_nasid; + dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", + part->remote_act_nasid); + + part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; + dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", + part->remote_act_phys_cpuid); + + part->remote_amos_page_pa = remote_vars->amos_page_pa; + dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", + part->remote_amos_page_pa); + + part->remote_vars_version = remote_vars->version; + dev_dbg(xpc_part, " remote_vars_version = 0x%x\n", + part->remote_vars_version); +} + + /* * Prior code has determine the nasid which generated an IPI. Inspect * that nasid to determine if its partition needs to be activated or @@ -542,8 +596,12 @@ xpc_identify_act_IRQ_req(int nasid) { struct xpc_rsvd_page *remote_rp; struct xpc_vars *remote_vars; - u64 remote_rsvd_page_pa; + u64 remote_rp_pa; u64 remote_vars_pa; + int remote_rp_version; + int reactivate = 0; + int stamp_diff; + struct timespec remote_rp_stamp = { 0, 0 }; partid_t partid; struct xpc_partition *part; enum xpc_retval ret; @@ -553,7 +611,7 @@ xpc_identify_act_IRQ_req(int nasid) remote_rp = (struct xpc_rsvd_page *) xpc_remote_copy_buffer; - ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rsvd_page_pa); + ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa); if (ret != xpcSuccess) { dev_warn(xpc_part, "unable to get reserved page from nasid %d, " "which sent interrupt, reason=%d\n", nasid, ret); @@ -561,6 +619,10 @@ xpc_identify_act_IRQ_req(int nasid) } remote_vars_pa = remote_rp->vars_pa; + remote_rp_version = remote_rp->version; + if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + remote_rp_stamp = remote_rp->stamp; + } partid = remote_rp->partid; part = &xpc_partitions[partid]; @@ -586,44 +648,117 @@ xpc_identify_act_IRQ_req(int nasid) "%ld:0x%lx\n", (int) nasid, (int) partid, part->act_IRQ_rcvd, remote_vars->heartbeat, remote_vars->heartbeating_to_mask); + if (xpc_partition_disengaged(part) && + part->act_state == XPC_P_INACTIVE) { - if (part->act_state == XPC_P_INACTIVE) { + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); - part->remote_rp_pa = remote_rsvd_page_pa; - dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", - part->remote_rp_pa); + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + if (xpc_partition_disengage_requested(1UL << partid)) { + /* + * Other side is waiting on us to disengage, + * even though we already have. + */ + return; + } + } else { + /* other side doesn't support disengage requests */ + xpc_clear_partition_disengage_request(1UL << partid); + } - part->remote_vars_pa = remote_vars_pa; - dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", - part->remote_vars_pa); + xpc_activate_partition(part); + return; + } - part->last_heartbeat = remote_vars->heartbeat; - dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", - part->last_heartbeat); + DBUG_ON(part->remote_rp_version == 0); + DBUG_ON(part->remote_vars_version == 0); + + if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) { + DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part-> + remote_vars_version)); + + if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> + version)); + /* see if the other side rebooted */ + if (part->remote_amos_page_pa == + remote_vars->amos_page_pa && + xpc_hb_allowed(sn_partition_id, + remote_vars)) { + /* doesn't look that way, so ignore the IPI */ + return; + } + } - part->remote_vars_part_pa = remote_vars->vars_part_pa; - dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", - part->remote_vars_part_pa); + /* + * Other side rebooted and previous XPC didn't support the + * disengage request, so we don't need to do anything special. + */ - part->remote_act_nasid = remote_vars->act_nasid; - dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", - part->remote_act_nasid); + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + part->reactivate_nasid = nasid; + XPC_DEACTIVATE_PARTITION(part, xpcReactivating); + return; + } - part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; - dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", - part->remote_act_phys_cpuid); + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)); - part->remote_amos_page_pa = remote_vars->amos_page_pa; - dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", - part->remote_amos_page_pa); + if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - xpc_activate_partition(part); + /* + * Other side rebooted and previous XPC did support the + * disengage request, but the new one doesn't. + */ - } else if (part->remote_amos_page_pa != remote_vars->amos_page_pa || - !XPC_HB_ALLOWED(sn_partition_id, remote_vars)) { + xpc_clear_partition_engaged(1UL << partid); + xpc_clear_partition_disengage_request(1UL << partid); + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + reactivate = 1; + + } else { + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); + + stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp, + &remote_rp_stamp); + if (stamp_diff != 0) { + DBUG_ON(stamp_diff >= 0); + + /* + * Other side rebooted and the previous XPC did support + * the disengage request, as does the new one. + */ + + DBUG_ON(xpc_partition_engaged(1UL << partid)); + DBUG_ON(xpc_partition_disengage_requested(1UL << + partid)); + + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + reactivate = 1; + } + } + + if (!xpc_partition_disengaged(part)) { + /* still waiting on other side to disengage from us */ + return; + } + + if (reactivate) { part->reactivate_nasid = nasid; XPC_DEACTIVATE_PARTITION(part, xpcReactivating); + + } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) && + xpc_partition_disengage_requested(1UL << partid)) { + XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown); } } @@ -646,12 +781,16 @@ xpc_identify_act_IRQ_sender(void) struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page; - act_amos = xpc_vars->act_amos; + act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; /* scan through act AMO variable looking for non-zero entries */ for (word = 0; word < XP_NASID_MASK_WORDS; word++) { + if (xpc_exiting) { + break; + } + nasid_mask = xpc_IPI_receive(&act_amos[word]); if (nasid_mask == 0) { /* no IRQs from nasids in this variable */ @@ -687,6 +826,55 @@ xpc_identify_act_IRQ_sender(void) } +/* + * See if the other side has responded to a partition disengage request + * from us. + */ +int +xpc_partition_disengaged(struct xpc_partition *part) +{ + partid_t partid = XPC_PARTID(part); + int disengaged; + + + disengaged = (xpc_partition_engaged(1UL << partid) == 0); + if (part->disengage_request_timeout) { + if (!disengaged) { + if (jiffies < part->disengage_request_timeout) { + /* timelimit hasn't been reached yet */ + return 0; + } + + /* + * Other side hasn't responded to our disengage + * request in a timely fashion, so assume it's dead. + */ + + xpc_clear_partition_engaged(1UL << partid); + disengaged = 1; + } + part->disengage_request_timeout = 0; + + /* cancel the timer function, provided it's not us */ + if (!in_interrupt()) { + del_singleshot_timer_sync(&part-> + disengage_request_timer); + } + + DBUG_ON(part->act_state != XPC_P_DEACTIVATING && + part->act_state != XPC_P_INACTIVE); + if (part->act_state != XPC_P_INACTIVE) { + xpc_wakeup_channel_mgr(part); + } + + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + xpc_cancel_partition_disengage_request(part); + } + } + return disengaged; +} + + /* * Mark specified partition as active. */ @@ -721,7 +909,6 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, enum xpc_retval reason) { unsigned long irq_flags; - partid_t partid = XPC_PARTID(part); spin_lock_irqsave(&part->act_lock, irq_flags); @@ -749,17 +936,27 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_unlock_irqrestore(&part->act_lock, irq_flags); - XPC_DISALLOW_HB(partid, xpc_vars); + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + xpc_request_partition_disengage(part); + xpc_IPI_send_disengage(part); + + /* set a timelimit on the disengage request */ + part->disengage_request_timeout = jiffies + + (XPC_DISENGAGE_REQUEST_TIMELIMIT * HZ); + part->disengage_request_timer.expires = + part->disengage_request_timeout; + add_timer(&part->disengage_request_timer); + } dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid, reason); - xpc_partition_down(part, reason); + xpc_partition_going_down(part, reason); } /* - * Mark specified partition as active. + * Mark specified partition as inactive. */ void xpc_mark_partition_inactive(struct xpc_partition *part) @@ -792,7 +989,7 @@ xpc_discovery(void) void *remote_rp_base; struct xpc_rsvd_page *remote_rp; struct xpc_vars *remote_vars; - u64 remote_rsvd_page_pa; + u64 remote_rp_pa; u64 remote_vars_pa; int region; int max_regions; @@ -877,7 +1074,7 @@ xpc_discovery(void) /* pull over the reserved page structure */ ret = xpc_get_remote_rp(nasid, discovered_nasids, - remote_rp, &remote_rsvd_page_pa); + remote_rp, &remote_rp_pa); if (ret != xpcSuccess) { dev_dbg(xpc_part, "unable to get reserved page " "from nasid %d, reason=%d\n", nasid, @@ -948,6 +1145,13 @@ xpc_discovery(void) remote_vars->act_nasid, remote_vars->act_phys_cpuid); + if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> + version)) { + part->remote_amos_page_pa = + remote_vars->amos_page_pa; + xpc_mark_partition_disengaged(part); + xpc_cancel_partition_disengage_request(part); + } xpc_IPI_send_activate(remote_vars); } } diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h index 1df1c9f61a65..f3052a54932b 100644 --- a/include/asm-ia64/sn/xp.h +++ b/include/asm-ia64/sn/xp.h @@ -217,7 +217,15 @@ enum xpc_retval { xpcInvalidPartid, /* 42: invalid partition ID */ xpcLocalPartid, /* 43: local partition ID */ - xpcUnknownReason /* 44: unknown reason -- must be last in list */ + xpcOtherGoingDown, /* 44: other side going down, reason unknown */ + xpcSystemGoingDown, /* 45: system is going down, reason unknown */ + xpcSystemHalt, /* 46: system is being halted */ + xpcSystemReboot, /* 47: system is being rebooted */ + xpcSystemPoweroff, /* 48: system is being powered off */ + + xpcDisconnecting, /* 49: channel disconnecting (closing) */ + + xpcUnknownReason /* 50: unknown reason -- must be last in list */ }; -- GitLab From 5fbcf9a5c6904bd563f584d12d1f4d3f68a19d7d Mon Sep 17 00:00:00 2001 From: Mark Maule Date: Tue, 6 Sep 2005 13:03:51 -0500 Subject: [PATCH 0015/1519] [IA64-SGI] volatile semantics in places where it seems necessary Resend using accessors instead of volatile qualifiers per hch comments, and easier to understand convenience macros per rja comments. Patch to apply volatile semantics when accessing MMR's in various SN files. Signed-off-by: Mark Maule Signed-off-by: Tony Luck --- arch/ia64/sn/pci/pcibr/pcibr_reg.c | 58 ++++++++++++++-------------- arch/ia64/sn/pci/tioca_provider.c | 31 +++++++-------- arch/ia64/sn/pci/tioce_provider.c | 29 +++++++------- include/asm-ia64/sn/io.h | 9 +++++ include/asm-ia64/sn/tioca_provider.h | 14 +++---- 5 files changed, 76 insertions(+), 65 deletions(-) diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 21426d02fbe6..1624b39cb3ec 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -29,10 +29,10 @@ void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_control &= ~bits; + __sn_clrq_relaxed(&ptr->tio.cp_control, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_wid_control &= ~bits; + __sn_clrq_relaxed(&ptr->pic.p_wid_control, bits); break; default: panic @@ -49,10 +49,10 @@ void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_control |= bits; + __sn_setq_relaxed(&ptr->tio.cp_control, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_wid_control |= bits; + __sn_setq_relaxed(&ptr->pic.p_wid_control, bits); break; default: panic @@ -73,10 +73,10 @@ uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_tflush; + ret = __sn_readq_relaxed(&ptr->tio.cp_tflush); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_wid_tflush; + ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush); break; default: panic @@ -103,10 +103,10 @@ uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_int_status; + ret = __sn_readq_relaxed(&ptr->tio.cp_int_status); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_int_status; + ret = __sn_readq_relaxed(&ptr->pic.p_int_status); break; default: panic @@ -127,10 +127,10 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_enable &= ~bits; + __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_enable &= ~bits; + __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits); break; default: panic @@ -147,10 +147,10 @@ void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_enable |= bits; + __sn_setq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_enable |= bits; + __sn_setq_relaxed(&ptr->pic.p_int_enable, bits); break; default: panic @@ -171,14 +171,16 @@ void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n, if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR; - ptr->tio.cp_int_addr[int_n] |= - (addr & TIOCP_HOST_INTR_ADDR); + __sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n], + TIOCP_HOST_INTR_ADDR); + __sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n], + (addr & TIOCP_HOST_INTR_ADDR)); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR; - ptr->pic.p_int_addr[int_n] |= - (addr & PIC_HOST_INTR_ADDR); + __sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n], + PIC_HOST_INTR_ADDR); + __sn_setq_relaxed(&ptr->pic.p_int_addr[int_n], + (addr & PIC_HOST_INTR_ADDR)); break; default: panic @@ -198,10 +200,10 @@ void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_force_pin[int_n] = 1; + writeq(1, &ptr->tio.cp_force_pin[int_n]); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_force_pin[int_n] = 1; + writeq(1, &ptr->pic.p_force_pin[int_n]); break; default: panic @@ -222,10 +224,12 @@ uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_wr_req_buf[device]; + ret = + __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_wr_req_buf[device]; + ret = + __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]); break; default: panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr); @@ -244,10 +248,10 @@ void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index, if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val; + writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val; + writeq(val, &ptr->pic.p_int_ate_ram[ate_index]); break; default: panic @@ -265,12 +269,10 @@ uint64_t *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = - (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]); + ret = &ptr->tio.cp_int_ate_ram[ate_index]; break; case PCIBR_BRIDGETYPE_PIC: - ret = - (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]); + ret = &ptr->pic.p_int_ate_ram[ate_index]; break; default: panic diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index ea09c12f0258..eaae2472d6b4 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -37,7 +37,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) uint64_t offset; struct page *tmp; struct tioca_common *tioca_common; - volatile struct tioca *ca_base; + struct tioca *ca_base; tioca_common = tioca_kern->ca_common; ca_base = (struct tioca *)tioca_common->ca_common.bs_base; @@ -174,27 +174,29 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) * DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029 */ - ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY; /* PV895469 ? */ - ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM); - ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT); + __sn_setq_relaxed(&ca_base->ca_control1, + CA_AGPDMA_OP_ENB_COMBDELAY); /* PV895469 ? */ + __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM); + __sn_setq_relaxed(&ca_base->ca_control2, + (0x2ull << CA_GART_MEM_PARAM_SHFT)); tioca_kern->ca_gart_iscoherent = 1; - ca_base->ca_control2 &= - ~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB); + __sn_clrq_relaxed(&ca_base->ca_control2, + (CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB)); /* * Unmask GART fetch error interrupts. Clear residual errors first. */ - ca_base->ca_int_status_alias = CA_GART_FETCH_ERR; - ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR; - ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR; + writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias); + writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias); + __sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR); /* * Program the aperature and gart registers in TIOCA */ - ca_base->ca_gart_aperature = ap_reg; - ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1; + writeq(ap_reg, &ca_base->ca_gart_aperature); + writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table); return 0; } @@ -211,7 +213,6 @@ void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) { int cap_ptr; - uint64_t ca_control1; uint32_t reg; struct tioca *tioca_base; struct pci_dev *pdev; @@ -256,9 +257,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) */ tioca_base = (struct tioca *)common->ca_common.bs_base; - ca_control1 = tioca_base->ca_control1; - ca_control1 |= CA_AGP_FW_ENABLE; - tioca_base->ca_control1 = ca_control1; + __sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE); } EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */ @@ -345,7 +344,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr) return 0; } - agp_dma_extn = ca_base->ca_agp_dma_addr_extn; + agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn); if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) { printk(KERN_ERR "%s: coretalk upper node (%u) " "mismatch with ca_agp_dma_addr_extn (%lu)\n", diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 8e75db2b825d..204826c2fa44 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -227,7 +227,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, ate = ATE_MAKE(addr, pagesize); ate_shadow[i + j] = ate; - ate_reg[i + j] = ate; + writeq(ate, &ate_reg[i + j]); addr += pagesize; } @@ -268,10 +268,10 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr) pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); if (ce_kern->ce_port[port].dirmap_refcnt == 0) { - volatile uint64_t tmp; + uint64_t tmp; ce_kern->ce_port[port].dirmap_shadow = ct_upper; - ce_mmr->ce_ure_dir_map[port] = ct_upper; + writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]); tmp = ce_mmr->ce_ure_dir_map[port]; dma_ok = 1; } else @@ -343,7 +343,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) if (TIOCE_D32_ADDR(bus_addr)) { if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { ce_kern->ce_port[port].dirmap_shadow = 0; - ce_mmr->ce_ure_dir_map[port] = 0; + writeq(0, &ce_mmr->ce_ure_dir_map[port]); } } else { struct tioce_dmamap *map; @@ -582,18 +582,18 @@ tioce_kern_init(struct tioce_common *tioce_common) */ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; - tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK; - tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE; + __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK); + __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE); tioce_kern->ce_ate3240_pagesize = KB(256); for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { tioce_kern->ce_ate40_shadow[i] = 0; - tioce_mmr->ce_ure_ate40[i] = 0; + writeq(0, &tioce_mmr->ce_ure_ate40[i]); } for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { tioce_kern->ce_ate3240_shadow[i] = 0; - tioce_mmr->ce_ure_ate3240[i] = 0; + writeq(0, &tioce_mmr->ce_ure_ate3240[i]); } return tioce_kern; @@ -665,7 +665,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) default: return; } - ce_mmr->ce_adm_force_int = force_int_val; + writeq(force_int_val, &ce_mmr->ce_adm_force_int); } /** @@ -686,6 +686,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) struct tioce_common *ce_common; struct tioce *ce_mmr; int bit; + uint64_t vector; pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; if (!pcidev_info) @@ -696,11 +697,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) bit = sn_irq_info->irq_int_bit; - ce_mmr->ce_adm_int_mask |= (1UL << bit); - ce_mmr->ce_adm_int_dest[bit] = - ((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) | - sn_irq_info->irq_xtalkaddr; - ce_mmr->ce_adm_int_mask &= ~(1UL << bit); + __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT; + vector |= sn_irq_info->irq_xtalkaddr; + writeq(vector, &ce_mmr->ce_adm_int_dest[bit]); + __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); tioce_force_interrupt(sn_irq_info); } diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h index 42209733f6b1..7597a52b426c 100644 --- a/include/asm-ia64/sn/io.h +++ b/include/asm-ia64/sn/io.h @@ -35,6 +35,15 @@ extern void sn_dma_flush(unsigned long); #define __sn_readl_relaxed ___sn_readl_relaxed #define __sn_readq_relaxed ___sn_readq_relaxed +/* + * Convenience macros for setting/clearing bits using the above accessors + */ + +#define __sn_setq_relaxed(addr, val) \ + writeq((__sn_readq_relaxed(addr) | (val)), (addr)) +#define __sn_clrq_relaxed(addr, val) \ + writeq((__sn_readq_relaxed(addr) & ~(val)), (addr)) + /* * The following routines are SN Platform specific, called when * a reference is made to inX/outX set macros. SN Platform diff --git a/include/asm-ia64/sn/tioca_provider.h b/include/asm-ia64/sn/tioca_provider.h index 5ccec608d325..b532ef6148ed 100644 --- a/include/asm-ia64/sn/tioca_provider.h +++ b/include/asm-ia64/sn/tioca_provider.h @@ -182,11 +182,11 @@ tioca_tlbflush(struct tioca_kernel *tioca_kernel) * touch every CL aligned GART entry. */ - ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM); - ca_base->ca_control2 |= CA_GART_FLUSH_TLB; - ca_base->ca_control2 |= - (0x2ull << CA_GART_MEM_PARAM_SHFT); - tmp = ca_base->ca_control2; + __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM); + __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); + __sn_setq_relaxed(&ca_base->ca_control2, + (0x2ull << CA_GART_MEM_PARAM_SHFT)); + tmp = __sn_readq_relaxed(&ca_base->ca_control2); } return; @@ -196,8 +196,8 @@ tioca_tlbflush(struct tioca_kernel *tioca_kernel) * Gart in uncached mode ... need an explicit flush. */ - ca_base->ca_control2 |= CA_GART_FLUSH_TLB; - tmp = ca_base->ca_control2; + __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); + tmp = __sn_readq_relaxed(&ca_base->ca_control2); } extern uint32_t tioca_gart_found; -- GitLab From d8c97d5f3aa348272df2ccb4e224b1cf9a1eb6d7 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 8 Sep 2005 12:39:59 -0700 Subject: [PATCH 0016/1519] [IA64] simplified efi memory map parsing New version leaves the original memory map unmodified. Also saves any granule trimmings for use by the uncached memory allocator. Inspired by Khalid Aziz (various traces of his patch still remain). Fixes to uncached_build_memmap() and sn2 testing by Martin Hicks. Signed-off-by: Tony Luck --- arch/ia64/kernel/efi.c | 423 +++++++++++++++++++++--------------- arch/ia64/kernel/setup.c | 3 + arch/ia64/kernel/uncached.c | 17 +- include/asm-ia64/meminit.h | 4 +- 4 files changed, 254 insertions(+), 193 deletions(-) diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 179f230816ed..1291db581721 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -239,57 +239,30 @@ is_available_memory (efi_memory_desc_t *md) return 0; } -/* - * Trim descriptor MD so its starts at address START_ADDR. If the descriptor covers - * memory that is normally available to the kernel, issue a warning that some memory - * is being ignored. - */ -static void -trim_bottom (efi_memory_desc_t *md, u64 start_addr) -{ - u64 num_skipped_pages; - - if (md->phys_addr >= start_addr || !md->num_pages) - return; - - num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT; - if (num_skipped_pages > md->num_pages) - num_skipped_pages = md->num_pages; +typedef struct kern_memdesc { + u64 attribute; + u64 start; + u64 num_pages; +} kern_memdesc_t; - if (is_available_memory(md)) - printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole " - "at 0x%lx\n", __FUNCTION__, - (num_skipped_pages << EFI_PAGE_SHIFT) >> 10, - md->phys_addr, start_addr - IA64_GRANULE_SIZE); - /* - * NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory - * descriptor list to become unsorted. In such a case, md->num_pages will be - * zero, so the Right Thing will happen. - */ - md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT; - md->num_pages -= num_skipped_pages; -} +static kern_memdesc_t *kern_memmap; static void -trim_top (efi_memory_desc_t *md, u64 end_addr) +walk (efi_freemem_callback_t callback, void *arg, u64 attr) { - u64 num_dropped_pages, md_end_addr; + kern_memdesc_t *k; + u64 start, end, voff; - md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT); - - if (md_end_addr <= end_addr || !md->num_pages) - return; - - num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT; - if (num_dropped_pages > md->num_pages) - num_dropped_pages = md->num_pages; - - if (is_available_memory(md)) - printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole " - "at 0x%lx\n", __FUNCTION__, - (num_dropped_pages << EFI_PAGE_SHIFT) >> 10, - md->phys_addr, end_addr); - md->num_pages -= num_dropped_pages; + voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET; + for (k = kern_memmap; k->start != ~0UL; k++) { + if (k->attribute != attr) + continue; + start = PAGE_ALIGN(k->start); + end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK; + if (start < end) + if ((*callback)(start + voff, end + voff, arg) < 0) + return; + } } /* @@ -299,148 +272,19 @@ trim_top (efi_memory_desc_t *md, u64 end_addr) void efi_memmap_walk (efi_freemem_callback_t callback, void *arg) { - int prev_valid = 0; - struct range { - u64 start; - u64 end; - } prev, curr; - void *efi_map_start, *efi_map_end, *p, *q; - efi_memory_desc_t *md, *check_md; - u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0; - unsigned long total_mem = 0; - - efi_map_start = __va(ia64_boot_param->efi_memmap); - efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; - efi_desc_size = ia64_boot_param->efi_memdesc_size; - - for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { - md = p; - - /* skip over non-WB memory descriptors; that's all we're interested in... */ - if (!(md->attribute & EFI_MEMORY_WB)) - continue; - - /* - * granule_addr is the base of md's first granule. - * [granule_addr - first_non_wb_addr) is guaranteed to - * be contiguous WB memory. - */ - granule_addr = GRANULEROUNDDOWN(md->phys_addr); - first_non_wb_addr = max(first_non_wb_addr, granule_addr); - - if (first_non_wb_addr < md->phys_addr) { - trim_bottom(md, granule_addr + IA64_GRANULE_SIZE); - granule_addr = GRANULEROUNDDOWN(md->phys_addr); - first_non_wb_addr = max(first_non_wb_addr, granule_addr); - } - - for (q = p; q < efi_map_end; q += efi_desc_size) { - check_md = q; - - if ((check_md->attribute & EFI_MEMORY_WB) && - (check_md->phys_addr == first_non_wb_addr)) - first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT; - else - break; /* non-WB or hole */ - } - - last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr); - if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) - trim_top(md, last_granule_addr); - - if (is_available_memory(md)) { - if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) { - if (md->phys_addr >= max_addr) - continue; - md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT; - first_non_wb_addr = max_addr; - } - - if (total_mem >= mem_limit) - continue; - - if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) { - unsigned long limit_addr = md->phys_addr; - - limit_addr += mem_limit - total_mem; - limit_addr = GRANULEROUNDDOWN(limit_addr); - - if (md->phys_addr > limit_addr) - continue; - - md->num_pages = (limit_addr - md->phys_addr) >> - EFI_PAGE_SHIFT; - first_non_wb_addr = max_addr = md->phys_addr + - (md->num_pages << EFI_PAGE_SHIFT); - } - total_mem += (md->num_pages << EFI_PAGE_SHIFT); - - if (md->num_pages == 0) - continue; - - curr.start = PAGE_OFFSET + md->phys_addr; - curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT); - - if (!prev_valid) { - prev = curr; - prev_valid = 1; - } else { - if (curr.start < prev.start) - printk(KERN_ERR "Oops: EFI memory table not ordered!\n"); - - if (prev.end == curr.start) { - /* merge two consecutive memory ranges */ - prev.end = curr.end; - } else { - start = PAGE_ALIGN(prev.start); - end = prev.end & PAGE_MASK; - if ((end > start) && (*callback)(start, end, arg) < 0) - return; - prev = curr; - } - } - } - } - if (prev_valid) { - start = PAGE_ALIGN(prev.start); - end = prev.end & PAGE_MASK; - if (end > start) - (*callback)(start, end, arg); - } + walk(callback, arg, EFI_MEMORY_WB); } /* - * Walk the EFI memory map to pull out leftover pages in the lower - * memory regions which do not end up in the regular memory map and - * stick them into the uncached allocator - * - * The regular walk function is significantly more complex than the - * uncached walk which means it really doesn't make sense to try and - * marge the two. + * Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that + * has memory that is available for uncached allocator. */ -void __init -efi_memmap_walk_uc (efi_freemem_callback_t callback) +void +efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg) { - void *efi_map_start, *efi_map_end, *p; - efi_memory_desc_t *md; - u64 efi_desc_size, start, end; - - efi_map_start = __va(ia64_boot_param->efi_memmap); - efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; - efi_desc_size = ia64_boot_param->efi_memdesc_size; - - for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { - md = p; - if (md->attribute == EFI_MEMORY_UC) { - start = PAGE_ALIGN(md->phys_addr); - end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK); - if ((*callback)(start, end, NULL) < 0) - return; - } - } + walk(callback, arg, EFI_MEMORY_UC); } - /* * Look for the PAL_CODE region reported by EFI and maps it using an * ITR to enable safe PAL calls in virtual mode. See IA-64 Processor @@ -862,3 +706,220 @@ efi_uart_console_only(void) printk(KERN_ERR "Malformed %s value\n", name); return 0; } + +#define efi_md_size(md) (md->num_pages << EFI_PAGE_SHIFT) + +static inline u64 +kmd_end(kern_memdesc_t *kmd) +{ + return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT)); +} + +static inline u64 +efi_md_end(efi_memory_desc_t *md) +{ + return (md->phys_addr + efi_md_size(md)); +} + +static inline int +efi_wb(efi_memory_desc_t *md) +{ + return (md->attribute & EFI_MEMORY_WB); +} + +static inline int +efi_uc(efi_memory_desc_t *md) +{ + return (md->attribute & EFI_MEMORY_UC); +} + +/* + * Look for the first granule aligned memory descriptor memory + * that is big enough to hold EFI memory map. Make sure this + * descriptor is atleast granule sized so it does not get trimmed + */ +struct kern_memdesc * +find_memmap_space (void) +{ + u64 contig_low=0, contig_high=0; + u64 as = 0, ae; + void *efi_map_start, *efi_map_end, *p, *q; + efi_memory_desc_t *md, *pmd = NULL, *check_md; + u64 space_needed, efi_desc_size; + unsigned long total_mem = 0; + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + /* + * Worst case: we need 3 kernel descriptors for each efi descriptor + * (if every entry has a WB part in the middle, and UC head and tail), + * plus one for the end marker. + */ + space_needed = sizeof(kern_memdesc_t) * + (3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1); + + for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) { + md = p; + if (!efi_wb(md)) { + continue; + } + if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) { + contig_low = GRANULEROUNDUP(md->phys_addr); + contig_high = efi_md_end(md); + for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) { + check_md = q; + if (!efi_wb(check_md)) + break; + if (contig_high != check_md->phys_addr) + break; + contig_high = efi_md_end(check_md); + } + contig_high = GRANULEROUNDDOWN(contig_high); + } + if (!is_available_memory(md) || md->type == EFI_LOADER_DATA) + continue; + + /* Round ends inward to granule boundaries */ + as = max(contig_low, md->phys_addr); + ae = min(contig_high, efi_md_end(md)); + + /* keep within max_addr= command line arg */ + ae = min(ae, max_addr); + if (ae <= as) + continue; + + /* avoid going over mem= command line arg */ + if (total_mem + (ae - as) > mem_limit) + ae -= total_mem + (ae - as) - mem_limit; + + if (ae <= as) + continue; + + if (ae - as > space_needed) + break; + } + if (p >= efi_map_end) + panic("Can't allocate space for kernel memory descriptors"); + + return __va(as); +} + +/* + * Walk the EFI memory map and gather all memory available for kernel + * to use. We can allocate partial granules only if the unavailable + * parts exist, and are WB. + */ +void +efi_memmap_init(unsigned long *s, unsigned long *e) +{ + struct kern_memdesc *k, *prev = 0; + u64 contig_low=0, contig_high=0; + u64 as, ae, lim; + void *efi_map_start, *efi_map_end, *p, *q; + efi_memory_desc_t *md, *pmd = NULL, *check_md; + u64 efi_desc_size; + unsigned long total_mem = 0; + + k = kern_memmap = find_memmap_space(); + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) { + md = p; + if (!efi_wb(md)) { + if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY || + md->type == EFI_BOOT_SERVICES_DATA)) { + k->attribute = EFI_MEMORY_UC; + k->start = md->phys_addr; + k->num_pages = md->num_pages; + k++; + } + continue; + } + if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) { + contig_low = GRANULEROUNDUP(md->phys_addr); + contig_high = efi_md_end(md); + for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) { + check_md = q; + if (!efi_wb(check_md)) + break; + if (contig_high != check_md->phys_addr) + break; + contig_high = efi_md_end(check_md); + } + contig_high = GRANULEROUNDDOWN(contig_high); + } + if (!is_available_memory(md)) + continue; + + /* + * Round ends inward to granule boundaries + * Give trimmings to uncached allocator + */ + if (md->phys_addr < contig_low) { + lim = min(efi_md_end(md), contig_low); + if (efi_uc(md)) { + if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC && + kmd_end(k-1) == md->phys_addr) { + (k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT; + } else { + k->attribute = EFI_MEMORY_UC; + k->start = md->phys_addr; + k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT; + k++; + } + } + as = contig_low; + } else + as = md->phys_addr; + + if (efi_md_end(md) > contig_high) { + lim = max(md->phys_addr, contig_high); + if (efi_uc(md)) { + if (lim == md->phys_addr && k > kern_memmap && + (k-1)->attribute == EFI_MEMORY_UC && + kmd_end(k-1) == md->phys_addr) { + (k-1)->num_pages += md->num_pages; + } else { + k->attribute = EFI_MEMORY_UC; + k->start = lim; + k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT; + k++; + } + } + ae = contig_high; + } else + ae = efi_md_end(md); + + /* keep within max_addr= command line arg */ + ae = min(ae, max_addr); + if (ae <= as) + continue; + + /* avoid going over mem= command line arg */ + if (total_mem + (ae - as) > mem_limit) + ae -= total_mem + (ae - as) - mem_limit; + + if (ae <= as) + continue; + if (prev && kmd_end(prev) == md->phys_addr) { + prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT; + total_mem += ae - as; + continue; + } + k->attribute = EFI_MEMORY_WB; + k->start = as; + k->num_pages = (ae - as) >> EFI_PAGE_SHIFT; + total_mem += ae - as; + prev = k++; + } + k->start = ~0L; /* end-marker */ + + /* reserve the memory we are using for kern_memmap */ + *s = (u64)kern_memmap; + *e = (u64)++k; +} diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 84f89da7c640..1658d687b79c 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -211,6 +211,9 @@ reserve_memory (void) } #endif + efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end); + n++; + /* end of memory marker */ rsvd_region[n].start = ~0UL; rsvd_region[n].end = ~0UL; diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index 4e9d06c48a8b..c6d40446c2c4 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -205,23 +205,18 @@ EXPORT_SYMBOL(uncached_free_page); static int __init uncached_build_memmap(unsigned long start, unsigned long end, void *arg) { - long length; - unsigned long vstart, vend; + long length = end - start; int node; - length = end - start; - vstart = start + __IA64_UNCACHED_OFFSET; - vend = end + __IA64_UNCACHED_OFFSET; - dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end); - memset((char *)vstart, 0, length); + memset((char *)start, 0, length); - node = paddr_to_nid(start); + node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET); - for (; vstart < vend ; vstart += PAGE_SIZE) { - dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart); - gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE); + for (; start < end ; start += PAGE_SIZE) { + dprintk(KERN_INFO "sticking %lx into the pool!\n", start); + gen_pool_free(uncached_pool[node], start, PAGE_SIZE); } return 0; diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h index 1590dc65b30b..90646632237c 100644 --- a/include/asm-ia64/meminit.h +++ b/include/asm-ia64/meminit.h @@ -16,10 +16,11 @@ * - initrd (optional) * - command line string * - kernel code & data + * - Kernel memory map built from EFI memory map * * More could be added if necessary */ -#define IA64_MAX_RSVD_REGIONS 5 +#define IA64_MAX_RSVD_REGIONS 6 struct rsvd_region { unsigned long start; /* virtual address of beginning of element */ @@ -33,6 +34,7 @@ extern void find_memory (void); extern void reserve_memory (void); extern void find_initrd (void); extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg); +extern void efi_memmap_init(unsigned long *, unsigned long *); /* * For rounding an address to the next IA64_GRANULE_SIZE or order -- GitLab From 1fa92957282e4595727c1a21bf6687ea5a2d612f Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 9 Sep 2005 11:41:12 -0700 Subject: [PATCH 0017/1519] [IA64] Need to include in a few more places. Signed-off-by: Tony Luck --- arch/ia64/sn/pci/pcibr/pcibr_reg.c | 1 + arch/ia64/sn/pci/tioca_provider.c | 1 + arch/ia64/sn/pci/tioce_provider.c | 1 + drivers/char/agp/sgi-agp.c | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 1624b39cb3ec..4f718c3e93d3 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index eaae2472d6b4..9b8dbce2b7b6 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 204826c2fa44..9f03d4e5121c 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index d3aa159c9dec..7957fc91f6ad 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include -- GitLab From 923f122573851d18a3832ca808269fa2d5046fb1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Sep 2005 13:21:29 +0900 Subject: [PATCH 0018/1519] [PATCH] sil24: initialization fix sil24 0.20 didn't use to perform (what seems to be) port multiplier initialization and controller reset 0.10 driver does. This makes some sil24 controllers malfunction. This patch adds PM initialization and controller resetting to initilization and bumps version to 0.21. Please refer to the following thread for more information. http://marc.theaimsgroup.com/?l=linux-ide&m=112582819830324&w=2 http://marc.theaimsgroup.com/?l=linux-ide&m=112636045531060&w=2 Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index cb91894471f2..d8a2f5f04e82 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.20" /* Silicon Image's preview driver was 0.10 */ +#define DRV_VERSION "0.21" /* Silicon Image's preview driver was 0.10 */ #define NR_PORTS 4 @@ -426,15 +426,11 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static void sil24_reset_controller(struct ata_port *ap) +static int __sil24_reset_controller(void *port) { - void *port = (void *)ap->ioaddr.cmd_addr; int cnt; u32 tmp; - printk(KERN_NOTICE DRV_NAME - " ata%u: resetting controller...\n", ap->id); - /* Reset controller state. Is this correct? */ writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); readl(port + PORT_CTRL_STAT); /* sync */ @@ -446,9 +442,19 @@ static void sil24_reset_controller(struct ata_port *ap) if (!(tmp & PORT_CS_DEV_RST)) break; } + if (tmp & PORT_CS_DEV_RST) - printk(KERN_ERR DRV_NAME - " ata%u: failed to reset controller\n", ap->id); + return -1; + return 0; +} + +static void sil24_reset_controller(struct ata_port *ap) +{ + printk(KERN_NOTICE DRV_NAME + " ata%u: resetting controller...\n", ap->id); + if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr)) + printk(KERN_ERR DRV_NAME + " ata%u: failed to reset controller\n", ap->id); } static void sil24_eng_timeout(struct ata_port *ap) @@ -740,6 +746,15 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Clear interrupts */ writel(0x0fff0fff, port + PORT_IRQ_STAT); writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* Clear port multiplier enable and resume bits */ + writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); + + /* Reset itself */ + if (__sil24_reset_controller(port)) + printk(KERN_ERR DRV_NAME + "(%s): failed to reset controller\n", + pci_name(pdev)); } /* Turn on interrupts */ -- GitLab From bb0ce608a3386268bd76ee6642a4cc8e6818a29b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:54 -0400 Subject: [PATCH 0019/1519] [PATCH] 8139cp: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to 8139cp. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/8139cp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 34b80de34fae..ebc20d9e7d7b 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1575,6 +1575,7 @@ static struct ethtool_ops cp_ethtool_ops = { .set_wol = cp_set_wol, .get_strings = cp_get_strings, .get_ethtool_stats = cp_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) @@ -1773,6 +1774,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < 3; i++) ((u16 *) (dev->dev_addr))[i] = le16_to_cpu (read_eeprom (regs, i + 7, addr_len)); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->open = cp_open; dev->stop = cp_close; -- GitLab From 62a720b889a37496d5f36d09875578956745d196 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:55 -0400 Subject: [PATCH 0020/1519] [PATCH] 8139too: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to 8139too. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/8139too.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 4c2cf7bbd252..76ef6efd5950 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -970,6 +970,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, for (i = 0; i < 3; i++) ((u16 *) (dev->dev_addr))[i] = le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len)); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* The Rtl8139-specific entries in the device structure. */ dev->open = rtl8139_open; @@ -2465,6 +2466,7 @@ static struct ethtool_ops rtl8139_ethtool_ops = { .get_strings = rtl8139_get_strings, .get_stats_count = rtl8139_get_stats_count, .get_ethtool_stats = rtl8139_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -- GitLab From 2160de53cc17a40ad07bd38bf52dd0bb72dd5183 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:55 -0400 Subject: [PATCH 0021/1519] [PATCH] b44: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to b44. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/b44.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 94939f570f78..d27e870e59ab 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1676,6 +1676,7 @@ static struct ethtool_ops b44_ethtool_ops = { .set_pauseparam = b44_set_pauseparam, .get_msglevel = b44_get_msglevel, .set_msglevel = b44_set_msglevel, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) @@ -1718,6 +1719,7 @@ static int __devinit b44_get_invariants(struct b44 *bp) bp->dev->dev_addr[3] = eeprom[80]; bp->dev->dev_addr[4] = eeprom[83]; bp->dev->dev_addr[5] = eeprom[82]; + memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len); bp->phy_addr = eeprom[90] & 0x1f; -- GitLab From 9beb0ac17bcfed23feb0a6fac328216568b74bc1 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:55 -0400 Subject: [PATCH 0022/1519] [PATCH] e1000: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to e1000. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 1 + drivers/net/e1000/e1000_main.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index f133ff0b0b94..8f3a13420278 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1739,6 +1739,7 @@ struct ethtool_ops e1000_ethtool_ops = { .phys_id = e1000_phys_id, .get_stats_count = e1000_get_stats_count, .get_ethtool_stats = e1000_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; void e1000_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 7c8a0a22dcd5..d02883dcc9b3 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -614,8 +614,9 @@ e1000_probe(struct pci_dev *pdev, if(e1000_read_mac_addr(&adapter->hw)) DPRINTK(PROBE, ERR, "EEPROM Read Error\n"); memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); + memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len); - if(!is_valid_ether_addr(netdev->dev_addr)) { + if(!is_valid_ether_addr(netdev->perm_addr)) { DPRINTK(PROBE, ERR, "Invalid MAC Address\n"); err = -EIO; goto err_eeprom; -- GitLab From a92dd9233ad185904daf95d040cf88c3da2d7ef6 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:56 -0400 Subject: [PATCH 0023/1519] [PATCH] e100: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to e100. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 25cc20e415da..1c918309539f 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2391,6 +2391,7 @@ static struct ethtool_ops e100_ethtool_ops = { .phys_id = e100_phys_id, .get_stats_count = e100_get_stats_count, .get_ethtool_stats = e100_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) @@ -2541,7 +2542,8 @@ static int __devinit e100_probe(struct pci_dev *pdev, e100_phy_init(nic); memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); - if(!is_valid_ether_addr(netdev->dev_addr)) { + memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN); + if(!is_valid_ether_addr(netdev->perm_addr)) { DPRINTK(PROBE, ERR, "Invalid MAC address from " "EEPROM, aborting.\n"); err = -EAGAIN; -- GitLab From c704b8566b060695e90ac401833db4b62813ad8a Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:56 -0400 Subject: [PATCH 0024/1519] [PATCH] forcedeth: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to forcedeth. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index d6eefdb71c17..6e042ecf6965 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -2065,6 +2065,7 @@ static struct ethtool_ops ops = { .get_regs_len = nv_get_regs_len, .get_regs = nv_get_regs, .nway_reset = nv_nway_reset, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int nv_open(struct net_device *dev) @@ -2377,8 +2378,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr[3] = (np->orig_mac[0] >> 16) & 0xff; dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff; dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff; + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - if (!is_valid_ether_addr(dev->dev_addr)) { + if (!is_valid_ether_addr(dev->perm_addr)) { /* * Bad mac address. At least one bios sets the mac address * to 01:23:45:67:89:ab -- GitLab From df859c519ef7b72d9be7396443316da87272e8b6 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:56 -0400 Subject: [PATCH 0025/1519] [PATCH] ixgb: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to ixgb. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 1 + drivers/net/ixgb/ixgb_main.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 9d026ed77ddd..319ee4cd70d8 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -723,6 +723,7 @@ struct ethtool_ops ixgb_ethtool_ops = { .phys_id = ixgb_phys_id, .get_stats_count = ixgb_get_stats_count, .get_ethtool_stats = ixgb_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; void ixgb_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 5c555373adbe..5015eaf4e20a 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -460,8 +460,9 @@ ixgb_probe(struct pci_dev *pdev, } ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); - if(!is_valid_ether_addr(netdev->dev_addr)) { + if(!is_valid_ether_addr(netdev->perm_addr)) { err = -EIO; goto err_eeprom; } -- GitLab From 78b345890a91dc57fecea8b6792012e0098c058f Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:57 -0400 Subject: [PATCH 0026/1519] [PATCH] ne2k-pci: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to ne2k-pci. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/ne2k-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index f1c01ac29102..e531a4eedfee 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -372,6 +372,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, printk("%2.2X%s", SA_prom[i], i == 5 ? ".\n": ":"); dev->dev_addr[i] = SA_prom[i]; } + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); return 0; @@ -637,6 +638,7 @@ static struct ethtool_ops ne2k_pci_ethtool_ops = { .get_drvinfo = ne2k_pci_get_drvinfo, .get_tx_csum = ethtool_op_get_tx_csum, .get_sg = ethtool_op_get_sg, + .get_perm_addr = ethtool_op_get_perm_addr, }; static void __devexit ne2k_pci_remove_one (struct pci_dev *pdev) -- GitLab From db0276b060918fac94c9d216213a31ee02cdd73e Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:57 -0400 Subject: [PATCH 0027/1519] [PATCH] pcnet32: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to pcnet32. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 113b68099216..6c3731b608da 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -957,6 +957,7 @@ static struct ethtool_ops pcnet32_ethtool_ops = { .phys_id = pcnet32_phys_id, .get_regs_len = pcnet32_get_regs_len, .get_regs = pcnet32_get_regs, + .get_perm_addr = ethtool_op_get_perm_addr, }; /* only probes for non-PCI devices, the rest are handled by @@ -1185,9 +1186,10 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) memcpy(dev->dev_addr, promaddr, 6); } } + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* if the ethernet address is not valid, force to 00:00:00:00:00:00 */ - if (!is_valid_ether_addr(dev->dev_addr)) + if (!is_valid_ether_addr(dev->perm_addr)) memset(dev->dev_addr, 0, sizeof(dev->dev_addr)); if (pcnet32_debug & NETIF_MSG_PROBE) { -- GitLab From 6d6525b7f74f9593e647f8c17b1de0f652e1f177 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:57 -0400 Subject: [PATCH 0028/1519] [PATCH] r8169: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to r8169. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index f0471d102e3c..cbc60ce365cb 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1028,6 +1028,7 @@ static struct ethtool_ops rtl8169_ethtool_ops = { .get_strings = rtl8169_get_strings, .get_stats_count = rtl8169_get_stats_count, .get_ethtool_stats = rtl8169_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum, @@ -1512,6 +1513,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Get MAC address. FIXME: read EEPROM */ for (i = 0; i < MAC_ADDR_LEN; i++) dev->dev_addr[i] = RTL_R8(MAC0 + i); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->open = rtl8169_open; dev->hard_start_xmit = rtl8169_start_xmit; -- GitLab From 56230d538233ba037eb679b0fc0b218d33b9b8b8 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:57 -0400 Subject: [PATCH 0029/1519] [PATCH] skge: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to skge. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/skge.c b/drivers/net/skge.c index d7c98515fdfd..757c83387a29 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -743,6 +743,7 @@ static struct ethtool_ops skge_ethtool_ops = { .phys_id = skge_phys_id, .get_stats_count = skge_get_stats_count, .get_ethtool_stats = skge_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; /* @@ -3080,6 +3081,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, /* read the mac address */ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* device is off until link detection */ netif_carrier_off(dev); -- GitLab From 30d60a8288ab6f59939736f5775a7110a8bfff9a Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:58 -0400 Subject: [PATCH 0030/1519] [PATCH] sundance: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to sundance. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index d500a5771dbc..e148a7212073 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -549,6 +549,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, for (i = 0; i < 3; i++) ((u16 *)dev->dev_addr)[i] = le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->base_addr = (unsigned long)ioaddr; dev->irq = irq; @@ -1619,6 +1620,7 @@ static struct ethtool_ops ethtool_ops = { .get_link = get_link, .get_msglevel = get_msglevel, .set_msglevel = set_msglevel, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -- GitLab From b81e8e1f4a51556586f72711a165bc3a0de230f3 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 12 Sep 2005 10:48:58 -0400 Subject: [PATCH 0031/1519] [PATCH] via-rhine: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to via-rhine. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index fc7738ffbfff..e7b4bc3820e3 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -814,8 +814,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, for (i = 0; i < 6; i++) dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - if (!is_valid_ether_addr(dev->dev_addr)) { + if (!is_valid_ether_addr(dev->perm_addr)) { rc = -EIO; printk(KERN_ERR "Invalid MAC address\n"); goto err_out_unmap; @@ -1829,6 +1830,7 @@ static struct ethtool_ops netdev_ethtool_ops = { .set_wol = rhine_set_wol, .get_sg = ethtool_op_get_sg, .get_tx_csum = ethtool_op_get_tx_csum, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -- GitLab From 343c686c04eec556645f251f7d6c9b3d7335dae0 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 9 Sep 2005 18:43:02 -0400 Subject: [PATCH 0032/1519] [PATCH] orinoco: WE-18 support Author: Jean Tourrilhes Signed-off-by: Pavel Roskin Use new Wireless Extension API for wireless stats. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 137 ++++++++------------------------- drivers/net/wireless/orinoco.h | 6 +- 2 files changed, 33 insertions(+), 110 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 8de49fe57233..639b8e4ba684 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -137,7 +137,7 @@ MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); /* We do this this way to avoid ifdefs in the actual code */ #ifdef WIRELESS_SPY -#define SPY_NUMBER(priv) (priv->spy_number) +#define SPY_NUMBER(priv) (priv->spy_data.spy_number) #else #define SPY_NUMBER(priv) 0 #endif /* WIRELESS_SPY */ @@ -396,10 +396,10 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) /* If a spy address is defined, we report stats of the * first spy address - Jean II */ if (SPY_NUMBER(priv)) { - wstats->qual.qual = priv->spy_stat[0].qual; - wstats->qual.level = priv->spy_stat[0].level; - wstats->qual.noise = priv->spy_stat[0].noise; - wstats->qual.updated = priv->spy_stat[0].updated; + wstats->qual.qual = priv->spy_data.spy_stat[0].qual; + wstats->qual.level = priv->spy_data.spy_stat[0].level; + wstats->qual.noise = priv->spy_data.spy_stat[0].noise; + wstats->qual.updated = priv->spy_data.spy_stat[0].updated; } } else { struct { @@ -718,18 +718,13 @@ static inline int is_ethersnap(void *_hdr) static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, int level, int noise) { - struct orinoco_private *priv = netdev_priv(dev); - int i; - - /* Gather wireless spy statistics: for each packet, compare the - * source address with out list, and if match, get the stats... */ - for (i = 0; i < priv->spy_number; i++) - if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) { - priv->spy_stat[i].level = level - 0x95; - priv->spy_stat[i].noise = noise - 0x95; - priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0; - priv->spy_stat[i].updated = 7; - } + struct iw_quality wstats; + wstats.level = level - 0x95; + wstats.noise = noise - 0x95; + wstats.qual = (level > noise) ? (level - noise) : 0; + wstats.updated = 7; + /* Update spy records */ + wireless_spy_update(dev, mac, &wstats); } static void orinoco_stat_gather(struct net_device *dev, @@ -2458,8 +2453,11 @@ struct net_device *alloc_orinocodev(int sizeof_card, dev->watchdog_timeo = HZ; /* 1 second timeout */ dev->get_stats = orinoco_get_stats; dev->ethtool_ops = &orinoco_ethtool_ops; - dev->get_wireless_stats = orinoco_get_wireless_stats; dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; +#ifdef WIRELESS_SPY + priv->wireless_data.spy_data = &priv->spy_data; + dev->wireless_data = &priv->wireless_data; +#endif dev->change_mtu = orinoco_change_mtu; dev->set_multicast_list = orinoco_set_multicast_list; /* we use the default eth_mac_addr for setting the MAC addr */ @@ -2831,7 +2829,7 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, } } - if ((priv->iw_mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){ + if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ /* Quality stats meaningless in ad-hoc mode */ } else { range->max_qual.qual = 0x8b - 0x2f; @@ -2878,6 +2876,14 @@ static int orinoco_ioctl_getiwrange(struct net_device *dev, range->min_r_time = 0; range->max_r_time = 65535 * 1000; /* ??? */ + /* Event capability (kernel) */ + IW_EVENT_CAPA_SET_KERNEL(range->event_capa); + /* Event capability (driver) */ + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); + IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP); + TRACE_EXIT(dev->name); return 0; @@ -3837,92 +3843,6 @@ static int orinoco_ioctl_getrid(struct net_device *dev, return err; } -/* Spy is used for link quality/strength measurements in Ad-Hoc mode - * Jean II */ -static int orinoco_ioctl_setspy(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *srq, - char *extra) - -{ - struct orinoco_private *priv = netdev_priv(dev); - struct sockaddr *address = (struct sockaddr *) extra; - int number = srq->length; - int i; - unsigned long flags; - - /* Make sure nobody mess with the structure while we do */ - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* orinoco_lock() doesn't disable interrupts, so make sure the - * interrupt rx path don't get confused while we copy */ - priv->spy_number = 0; - - if (number > 0) { - /* Extract the addresses */ - for (i = 0; i < number; i++) - memcpy(priv->spy_address[i], address[i].sa_data, - ETH_ALEN); - /* Reset stats */ - memset(priv->spy_stat, 0, - sizeof(struct iw_quality) * IW_MAX_SPY); - /* Set number of addresses */ - priv->spy_number = number; - } - - /* Now, let the others play */ - orinoco_unlock(priv, &flags); - - /* Do NOT call commit handler */ - return 0; -} - -static int orinoco_ioctl_getspy(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct sockaddr *address = (struct sockaddr *) extra; - int number; - int i; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - number = priv->spy_number; - /* Create address struct */ - for (i = 0; i < number; i++) { - memcpy(address[i].sa_data, priv->spy_address[i], ETH_ALEN); - address[i].sa_family = AF_UNIX; - } - if (number > 0) { - /* Create address struct */ - for (i = 0; i < number; i++) { - memcpy(address[i].sa_data, priv->spy_address[i], - ETH_ALEN); - address[i].sa_family = AF_UNIX; - } - /* Copy stats */ - /* In theory, we should disable irqs while copying the stats - * because the rx path might update it in the middle... - * Bah, who care ? - Jean II */ - memcpy(extra + (sizeof(struct sockaddr) * number), - priv->spy_stat, sizeof(struct iw_quality) * number); - } - /* Reset updated flags. */ - for (i = 0; i < number; i++) - priv->spy_stat[i].updated = 0; - - orinoco_unlock(priv, &flags); - - srq->length = number; - - return 0; -} - /* Trigger a scan (look for other cells in the vicinity */ static int orinoco_ioctl_setscan(struct net_device *dev, struct iw_request_info *info, @@ -4353,8 +4273,10 @@ static const iw_handler orinoco_handler[] = { [SIOCSIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens, [SIOCGIWSENS -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens, [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange, - [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setspy, - [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getspy, + [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, + [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, + [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, + [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, [SIOCSIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap, [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap, [SIOCSIWSCAN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan, @@ -4399,6 +4321,7 @@ static const struct iw_handler_def orinoco_handler_def = { .standard = orinoco_handler, .private = orinoco_private_handler, .private_args = orinoco_privtab, + .get_wireless_stats = orinoco_get_wireless_stats, }; static void orinoco_get_drvinfo(struct net_device *dev, diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 2f213a7103fe..c800563034a7 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "hermes.h" @@ -112,9 +113,8 @@ struct orinoco_private { u16 pm_on, pm_mcast, pm_period, pm_timeout; u16 preamble; #ifdef WIRELESS_SPY - int spy_number; - u_char spy_address[IW_MAX_SPY][ETH_ALEN]; - struct iw_quality spy_stat[IW_MAX_SPY]; + struct iw_spy_data spy_data; /* iwspy support */ + struct iw_public_data wireless_data; #endif /* Configuration dependent variables */ -- GitLab From 3173c8907ffb2c64456142da3df2bd0500bd59e0 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Sun, 11 Sep 2005 02:09:55 -0700 Subject: [PATCH 0033/1519] [PATCH] drivers/net: fix-up schedule_timeout() usage Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan Cc: Jeff Garzik Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/8139cp.c | 3 +- drivers/net/hp100.c | 48 ++++++++--------------- drivers/net/irda/stir4200.c | 7 ++-- drivers/net/ixgb/ixgb_ethtool.c | 7 ++-- drivers/net/ns83820.c | 3 +- drivers/net/tokenring/ibmtr.c | 9 ++--- drivers/net/tokenring/olympic.c | 2 +- drivers/net/tokenring/tms380tr.c | 3 +- drivers/net/typhoon.c | 7 ++-- drivers/net/wan/cosa.c | 6 +-- drivers/net/wan/dscc4.c | 9 ++--- drivers/net/wan/farsync.c | 3 +- drivers/net/wireless/ipw2100.c | 17 +++----- drivers/net/wireless/prism54/islpci_dev.c | 6 +-- drivers/net/wireless/prism54/islpci_mgt.c | 5 +-- include/linux/ibmtr.h | 4 +- include/linux/netdevice.h | 6 +-- 17 files changed, 53 insertions(+), 92 deletions(-) diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index ebc20d9e7d7b..bd99c268e2da 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1029,8 +1029,7 @@ static void cp_reset_hw (struct cp_private *cp) if (!(cpr8(Cmd) & CmdReset)) return; - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout_uninterruptible(10); } printk(KERN_ERR "%s: hardware reset timeout\n", cp->dev->name); diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index cf0ac6fda1a1..b71fab6e34f4 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -2517,10 +2517,8 @@ static int hp100_down_vg_link(struct net_device *dev) do { if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); if (time_after_eq(jiffies, time)) /* no signal->no logout */ @@ -2536,10 +2534,8 @@ static int hp100_down_vg_link(struct net_device *dev) do { if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); #ifdef HP100_DEBUG @@ -2577,10 +2573,8 @@ static int hp100_down_vg_link(struct net_device *dev) do { if (!(hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST)) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); hp100_orb(HP100_AUTO_MODE, MAC_CFG_3); /* Autosel back on */ @@ -2591,10 +2585,8 @@ static int hp100_down_vg_link(struct net_device *dev) do { if ((hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) == 0) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); if (time_before_eq(time, jiffies)) { @@ -2606,10 +2598,8 @@ static int hp100_down_vg_link(struct net_device *dev) time = jiffies + (2 * HZ); /* This seems to take a while.... */ do { - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); return 0; @@ -2659,10 +2649,8 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) do { if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); /* Start an addressed training and optionally request promiscuous port */ @@ -2697,10 +2685,8 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) do { if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) break; - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_before(jiffies, time)); if (time_after_eq(jiffies, time)) { @@ -2723,10 +2709,8 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) #endif break; } - if (!in_interrupt()) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - } + if (!in_interrupt()) + schedule_timeout_interruptible(1); } while (time_after(time, jiffies)); } diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 15f207323d97..3961a754e920 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -678,10 +678,9 @@ static void turnaround_delay(const struct stir_cb *stir, long us) return; ticks = us / (1000000 / HZ); - if (ticks > 0) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1 + ticks); - } else + if (ticks > 0) + schedule_timeout_interruptible(1 + ticks); + else udelay(us); } diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 319ee4cd70d8..04e47189d830 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -645,11 +645,10 @@ ixgb_phys_id(struct net_device *netdev, uint32_t data) mod_timer(&adapter->blink_timer, jiffies); - set_current_state(TASK_INTERRUPTIBLE); - if(data) - schedule_timeout(data * HZ); + if (data) + schedule_timeout_interruptible(data * HZ); else - schedule_timeout(MAX_SCHEDULE_TIMEOUT); + schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT); del_timer_sync(&adapter->blink_timer); ixgb_led_off(&adapter->hw); diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index e64df4d0800b..ed72a23c85dd 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1632,8 +1632,7 @@ static void ns83820_run_bist(struct net_device *ndev, const char *name, u32 enab timed_out = 1; break; } - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + schedule_timeout_uninterruptible(1); } if (status & fail) diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index e7b001017b9a..8154bbbb7792 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -318,7 +318,7 @@ static void ibmtr_cleanup_card(struct net_device *dev) if (dev->base_addr) { outb(0,dev->base_addr+ADAPTRESET); - schedule_timeout(TR_RST_TIME); /* wait 50ms */ + schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ outb(0,dev->base_addr+ADAPTRESETREL); } @@ -859,8 +859,7 @@ static int tok_init_card(struct net_device *dev) writeb(~INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); outb(0, PIOaddr + ADAPTRESET); - current->state=TASK_UNINTERRUPTIBLE; - schedule_timeout(TR_RST_TIME); /* wait 50ms */ + schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ outb(0, PIOaddr + ADAPTRESETREL); #ifdef ENABLE_PAGING @@ -908,8 +907,8 @@ static int tok_open(struct net_device *dev) DPRINTK("Adapter is up and running\n"); return 0; } - current->state=TASK_INTERRUPTIBLE; - i=schedule_timeout(TR_RETRY_INTERVAL); /* wait 30 seconds */ + i=schedule_timeout_interruptible(TR_RETRY_INTERVAL); + /* wait 30 seconds */ if(i!=0) break; /*prob. a signal, like the i>24*HZ case above */ } outb(0, dev->base_addr + ADAPTRESET);/* kill pending interrupts*/ diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c index 9e7923192a49..05477d24fd49 100644 --- a/drivers/net/tokenring/olympic.c +++ b/drivers/net/tokenring/olympic.c @@ -1101,7 +1101,7 @@ static int olympic_close(struct net_device *dev) while(olympic_priv->srb_queued) { - t = schedule_timeout(60*HZ); + t = schedule_timeout_interruptible(60*HZ); if(signal_pending(current)) { printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index 2e39bf1f7462..c1925590a0e1 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -1243,8 +1243,7 @@ void tms380tr_wait(unsigned long time) tmp = jiffies + time/(1000000/HZ); do { - current->state = TASK_INTERRUPTIBLE; - tmp = schedule_timeout(tmp); + tmp = schedule_timeout_interruptible(tmp); } while(time_after(tmp, jiffies)); #else udelay(time); diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index ecfa6f8805ce..4c76cb794bfb 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -419,10 +419,9 @@ typhoon_reset(void __iomem *ioaddr, int wait_type) TYPHOON_STATUS_WAITING_FOR_HOST) goto out; - if(wait_type == WaitSleep) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); - } else + if(wait_type == WaitSleep) + schedule_timeout_uninterruptible(1); + else udelay(TYPHOON_UDELAY); } diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 7ff814fd65d0..ae9e897c255e 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -1617,8 +1617,7 @@ static int get_wait_data(struct cosa_data *cosa) return r; } /* sleep if not ready to read */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); + schedule_timeout_interruptible(1); } printk(KERN_INFO "cosa: timeout in get_wait_data (status 0x%x)\n", cosa_getstatus(cosa)); @@ -1644,8 +1643,7 @@ static int put_wait_data(struct cosa_data *cosa, int data) } #if 0 /* sleep if not ready to read */ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); + schedule_timeout_interruptible(1); #endif } printk(KERN_INFO "cosa%d: timeout in put_wait_data (status 0x%x)\n", diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 520a77a798e2..0c1ab4ac8bdb 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -542,8 +542,7 @@ static int dscc4_wait_ack_cec(struct dscc4_dev_priv *dpriv, msg, i); goto done; } - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout_uninterruptible(10); rmb(); } while (++i > 0); printk(KERN_ERR "%s: %s timeout\n", dev->name, msg); @@ -588,8 +587,7 @@ static inline int dscc4_xpr_ack(struct dscc4_dev_priv *dpriv) (dpriv->iqtx[cur] & Xpr)) break; smp_rmb(); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout_uninterruptible(10); } while (++i > 0); return (i >= 0 ) ? i : -EAGAIN; @@ -1035,8 +1033,7 @@ static void dscc4_pci_reset(struct pci_dev *pdev, void __iomem *ioaddr) /* Flush posted writes */ readl(ioaddr + GSTAR); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout_uninterruptible(10); for (i = 0; i < 16; i++) pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]); diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 2c83cca34b86..10befb02d768 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -980,8 +980,7 @@ fst_issue_cmd(struct fst_port_info *port, unsigned short cmd) /* Wait for any previous command to complete */ while (mbval > NAK) { spin_unlock_irqrestore(&card->card_lock, flags); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + schedule_timeout_uninterruptible(1); spin_lock_irqsave(&card->card_lock, flags); if (++safety > 2000) { diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 2414e6493aa5..e5cdb5bfabc8 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -800,8 +800,7 @@ static int ipw2100_hw_send_command(struct ipw2100_priv *priv, * doesn't seem to have as many firmware restart cycles... * * As a test, we're sticking in a 1/100s delay here */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ / 100); + schedule_timeout_uninterruptible(msecs_to_jiffies(10)); return 0; @@ -1256,8 +1255,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv) IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); i = 5000; do { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(40 * HZ / 1000); + schedule_timeout_uninterruptible(msecs_to_jiffies(40)); /* Todo... wait for sync command ... */ read_register(priv->net_dev, IPW_REG_INTA, &inta); @@ -1411,8 +1409,7 @@ static int ipw2100_hw_phy_off(struct ipw2100_priv *priv) (val2 & IPW2100_COMMAND_PHY_OFF)) return 0; - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HW_PHY_OFF_LOOP_DELAY); + schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY); } return -EIO; @@ -1466,7 +1463,7 @@ static int ipw2100_enable_adapter(struct ipw2100_priv *priv) static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) { -#define HW_POWER_DOWN_DELAY (HZ / 10) +#define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100)) struct host_command cmd = { .host_command = HOST_PRE_POWER_DOWN, @@ -1520,10 +1517,8 @@ static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) printk(KERN_WARNING DRV_NAME ": " "%s: Power down command failed: Error %d\n", priv->net_dev->name, err); - else { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HW_POWER_DOWN_DELAY); - } + else + schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY); } priv->status &= ~STATUS_ENABLED; diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index 6f13d4a8e2d3..10cce514c15d 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -439,8 +439,7 @@ prism54_bring_down(islpci_private *priv) wmb(); /* wait a while for the device to reset */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(50*HZ/1000); + schedule_timeout_uninterruptible(msecs_to_jiffies(50)); return 0; } @@ -491,8 +490,7 @@ islpci_reset_if(islpci_private *priv) /* The software reset acknowledge needs about 220 msec here. * Be conservative and wait for up to one second. */ - set_current_state(TASK_UNINTERRUPTIBLE); - remaining = schedule_timeout(HZ); + remaining = schedule_timeout_uninterruptible(HZ); if(remaining > 0) { result = 0; diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index b6f2e5a223be..4937a5ad4b2c 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -455,7 +455,7 @@ islpci_mgt_transaction(struct net_device *ndev, struct islpci_mgmtframe **recvframe) { islpci_private *priv = netdev_priv(ndev); - const long wait_cycle_jiffies = (ISL38XX_WAIT_CYCLE * 10 * HZ) / 1000; + const long wait_cycle_jiffies = msecs_to_jiffies(ISL38XX_WAIT_CYCLE * 10); long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies; int err; DEFINE_WAIT(wait); @@ -475,8 +475,7 @@ islpci_mgt_transaction(struct net_device *ndev, int timeleft; struct islpci_mgmtframe *frame; - set_current_state(TASK_UNINTERRUPTIBLE); - timeleft = schedule_timeout(wait_cycle_jiffies); + timeleft = schedule_timeout_uninterruptible(wait_cycle_jiffies); frame = xchg(&priv->mgmt_received, NULL); if (frame) { if (frame->header->oid == oid) { diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h index 2ef0b21517fb..1c7a0dd5536a 100644 --- a/include/linux/ibmtr.h +++ b/include/linux/ibmtr.h @@ -7,8 +7,8 @@ /* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */ #define TR_RETRY_INTERVAL (30*HZ) /* 500 on PC = 5 s */ -#define TR_RST_TIME (HZ/20) /* 5 on PC = 50 ms */ -#define TR_BUSY_INTERVAL (HZ/5) /* 5 on PC = 200 ms */ +#define TR_RST_TIME (msecs_to_jiffies(50)) /* 5 on PC = 50 ms */ +#define TR_BUSY_INTERVAL (msecs_to_jiffies(200)) /* 5 on PC = 200 ms */ #define TR_SPIN_INTERVAL (3*HZ) /* 3 seconds before init timeout */ #define TR_ISA 1 diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 7c717907896d..98c98e6cd4f3 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -852,11 +852,9 @@ static inline void netif_rx_complete(struct net_device *dev) static inline void netif_poll_disable(struct net_device *dev) { - while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) { + while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) /* No hurry. */ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } + schedule_timeout_interruptible(1); } static inline void netif_poll_enable(struct net_device *dev) -- GitLab From 8e18d1f9c9dcbf2de5b79cad771ed639983ab6cd Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 10 Sep 2005 14:45:00 -0700 Subject: [PATCH 0034/1519] [PATCH] Replace drivers/net/wan custom ctype macros with standard ones Replace the custom is_digit()/is_hex_digit() macros with isdigit()/isxdigit() from Additionaly remove unused macro is_alpha() from Signed-off-by: Tobias Klauser Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wan/cycx_x25.c | 5 +++-- drivers/net/wan/sdla_fr.c | 4 ++-- drivers/net/wan/sdla_x25.c | 8 ++++---- include/linux/cyclomx.h | 2 -- include/linux/wanpipe.h | 9 --------- 5 files changed, 9 insertions(+), 19 deletions(-) diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c index 02d57c0b4243..a631d1c2fa14 100644 --- a/drivers/net/wan/cycx_x25.c +++ b/drivers/net/wan/cycx_x25.c @@ -78,6 +78,7 @@ #define CYCLOMX_X25_DEBUG 1 +#include /* isdigit() */ #include /* return codes */ #include /* ARPHRD_HWX25 */ #include /* printk(), and other useful stuff */ @@ -418,7 +419,7 @@ static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, /* Set channel timeouts (default if not specified) */ chan->idle_tmout = conf->idle_timeout ? conf->idle_timeout : 90; - } else if (is_digit(conf->addr[0])) { /* PVC */ + } else if (isdigit(conf->addr[0])) { /* PVC */ s16 lcn = dec_to_uint(conf->addr, 0); if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc) @@ -1531,7 +1532,7 @@ static unsigned dec_to_uint(u8 *str, int len) if (!len) len = strlen(str); - for (; len && is_digit(*str); ++str, --len) + for (; len && isdigit(*str); ++str, --len) val = (val * 10) + (*str - (unsigned) '0'); return val; diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c index 0497dbdb8631..7f1ce9d4333e 100644 --- a/drivers/net/wan/sdla_fr.c +++ b/drivers/net/wan/sdla_fr.c @@ -822,7 +822,7 @@ static int new_if(struct wan_device* wandev, struct net_device* dev, chan->card = card; /* verify media address */ - if (is_digit(conf->addr[0])) { + if (isdigit(conf->addr[0])) { dlci = dec_to_uint(conf->addr, 0); @@ -3456,7 +3456,7 @@ static unsigned int dec_to_uint (unsigned char* str, int len) if (!len) len = strlen(str); - for (val = 0; len && is_digit(*str); ++str, --len) + for (val = 0; len && isdigit(*str); ++str, --len) val = (val * 10) + (*str - (unsigned)'0'); return val; diff --git a/drivers/net/wan/sdla_x25.c b/drivers/net/wan/sdla_x25.c index 8a95d61a2f8f..63f846d6f3a6 100644 --- a/drivers/net/wan/sdla_x25.c +++ b/drivers/net/wan/sdla_x25.c @@ -957,7 +957,7 @@ static int new_if(struct wan_device* wandev, struct net_device* dev, chan->hold_timeout = (conf->hold_timeout) ? conf->hold_timeout : 10; - }else if (is_digit(conf->addr[0])){ /* PVC */ + }else if (isdigit(conf->addr[0])){ /* PVC */ int lcn = dec_to_uint(conf->addr, 0); if ((lcn >= card->u.x.lo_pvc) && (lcn <= card->u.x.hi_pvc)){ @@ -3875,7 +3875,7 @@ static unsigned int dec_to_uint (unsigned char* str, int len) if (!len) len = strlen(str); - for (val = 0; len && is_digit(*str); ++str, --len) + for (val = 0; len && isdigit(*str); ++str, --len) val = (val * 10) + (*str - (unsigned)'0'); return val; @@ -3896,9 +3896,9 @@ static unsigned int hex_to_uint (unsigned char* str, int len) for (val = 0; len; ++str, --len) { ch = *str; - if (is_digit(ch)) + if (isdigit(ch)) val = (val << 4) + (ch - (unsigned)'0'); - else if (is_hex_digit(ch)) + else if (isxdigit(ch)) val = (val << 4) + ((ch & 0xDF) - (unsigned)'A' + 10); else break; } diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h index 04fa7dff079c..300d704bdb9a 100644 --- a/include/linux/cyclomx.h +++ b/include/linux/cyclomx.h @@ -37,8 +37,6 @@ #include #endif -#define is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0) - /* Adapter Data Space. * This structure is needed because we handle multiple cards, otherwise * static data would do it. diff --git a/include/linux/wanpipe.h b/include/linux/wanpipe.h index 167d956c492b..dae9860091dd 100644 --- a/include/linux/wanpipe.h +++ b/include/linux/wanpipe.h @@ -265,15 +265,6 @@ typedef struct { #include #include - -#define is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0) -#define is_alpha(ch) ((((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'z')||\ - ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'Z'))?1:0) -#define is_hex_digit(ch) ((((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')||\ - ((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'f')||\ - ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'F'))?1:0) - - /****** Data Structures *****************************************************/ /* Adapter Data Space. -- GitLab From 7665a08928f241247afe8c76865cdbe4ef5489bf Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 9 Sep 2005 23:17:28 -0700 Subject: [PATCH 0035/1519] [PATCH] drivers/net/wan/: possible cleanups This patch contains possible cleanups including the following: - make needlessly global code static - #if 0 the following unused global function: - sdladrv.c: sdla_intde - remove the following unused global variable: - lmc_media.c: lmc_t1_cables - remove the following unneeded EXPORT_SYMBOL's: - cycx_drv.c: cycx_inten - sdladrv.c: sdla_inten - sdladrv.c: sdla_intde - sdladrv.c: sdla_intack - sdladrv.c: sdla_intr - syncppp.c: sppp_input - syncppp.c: sppp_change_mtu Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wan/cycx_drv.c | 7 ++- drivers/net/wan/cycx_main.c | 2 +- drivers/net/wan/dscc4.c | 14 +++--- drivers/net/wan/farsync.c | 24 ++++----- drivers/net/wan/hdlc_fr.c | 2 +- drivers/net/wan/lmc/lmc_debug.c | 10 ++-- drivers/net/wan/lmc/lmc_media.c | 8 --- drivers/net/wan/pc300.h | 16 ------ drivers/net/wan/pc300_drv.c | 87 +++++++++++++++++---------------- drivers/net/wan/pc300_tty.c | 18 +++---- drivers/net/wan/sdla.c | 20 ++++---- drivers/net/wan/sdladrv.c | 16 +++--- drivers/net/wan/syncppp.c | 10 ++-- include/linux/cycx_drv.h | 1 - include/linux/sdladrv.h | 4 -- include/net/syncppp.h | 1 - 16 files changed, 101 insertions(+), 139 deletions(-) diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c index 9e56fc346ba4..e6d005726aad 100644 --- a/drivers/net/wan/cycx_drv.c +++ b/drivers/net/wan/cycx_drv.c @@ -109,7 +109,7 @@ static long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; * < 0 error. * Context: process */ -int __init cycx_drv_init(void) +static int __init cycx_drv_init(void) { printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE, copyright); @@ -119,7 +119,7 @@ int __init cycx_drv_init(void) /* Module 'remove' entry point. * o release all remaining system resources */ -void cycx_drv_cleanup(void) +static void cycx_drv_cleanup(void) { } @@ -184,8 +184,7 @@ int cycx_down(struct cycx_hw *hw) } /* Enable interrupt generation. */ -EXPORT_SYMBOL(cycx_inten); -void cycx_inten(struct cycx_hw *hw) +static void cycx_inten(struct cycx_hw *hw) { writeb(0, hw->dpmbase); } diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c index 7b48064364dc..430b1f630fb4 100644 --- a/drivers/net/wan/cycx_main.c +++ b/drivers/net/wan/cycx_main.c @@ -103,7 +103,7 @@ static struct cycx_device *cycx_card_array; /* adapter data space */ * < 0 error. * Context: process */ -int __init cycx_init(void) +static int __init cycx_init(void) { int cnt, err = -ENOMEM; diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 0c1ab4ac8bdb..2f61a47b4716 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -446,8 +446,8 @@ static inline unsigned int dscc4_tx_quiescent(struct dscc4_dev_priv *dpriv, return readl(dpriv->base_addr + CH0FTDA + dpriv->dev_id*4) == dpriv->ltda; } -int state_check(u32 state, struct dscc4_dev_priv *dpriv, struct net_device *dev, - const char *msg) +static int state_check(u32 state, struct dscc4_dev_priv *dpriv, + struct net_device *dev, const char *msg) { int ret = 0; @@ -466,8 +466,9 @@ int state_check(u32 state, struct dscc4_dev_priv *dpriv, struct net_device *dev, return ret; } -void dscc4_tx_print(struct net_device *dev, struct dscc4_dev_priv *dpriv, - char *msg) +static void dscc4_tx_print(struct net_device *dev, + struct dscc4_dev_priv *dpriv, + char *msg) { printk(KERN_DEBUG "%s: tx_current=%02d tx_dirty=%02d (%s)\n", dev->name, dpriv->tx_current, dpriv->tx_dirty, msg); @@ -507,7 +508,8 @@ static void dscc4_release_ring(struct dscc4_dev_priv *dpriv) } } -inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv, struct net_device *dev) +static inline int try_get_rx_skb(struct dscc4_dev_priv *dpriv, + struct net_device *dev) { unsigned int dirty = dpriv->rx_dirty%RX_RING_SIZE; struct RxFD *rx_fd = dpriv->rx_fd + dirty; @@ -1891,7 +1893,7 @@ static void dscc4_rx_irq(struct dscc4_pci_priv *priv, * It failed and locked solid. Thus the introduction of a dummy skb. * Problem is acknowledged in errata sheet DS5. Joy :o/ */ -struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv) +static struct sk_buff *dscc4_init_dummy_skb(struct dscc4_dev_priv *dpriv) { struct sk_buff *skb; diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 10befb02d768..7981a2c7906e 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -74,11 +74,11 @@ MODULE_LICENSE("GPL"); /* * Modules parameters and associated varaibles */ -int fst_txq_low = FST_LOW_WATER_MARK; -int fst_txq_high = FST_HIGH_WATER_MARK; -int fst_max_reads = 7; -int fst_excluded_cards = 0; -int fst_excluded_list[FST_MAX_CARDS]; +static int fst_txq_low = FST_LOW_WATER_MARK; +static int fst_txq_high = FST_HIGH_WATER_MARK; +static int fst_max_reads = 7; +static int fst_excluded_cards = 0; +static int fst_excluded_list[FST_MAX_CARDS]; module_param(fst_txq_low, int, 0); module_param(fst_txq_high, int, 0); @@ -572,13 +572,13 @@ static void do_bottom_half_rx(struct fst_card_info *card); static void fst_process_tx_work_q(unsigned long work_q); static void fst_process_int_work_q(unsigned long work_q); -DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0); -DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0); +static DECLARE_TASKLET(fst_tx_task, fst_process_tx_work_q, 0); +static DECLARE_TASKLET(fst_int_task, fst_process_int_work_q, 0); -struct fst_card_info *fst_card_array[FST_MAX_CARDS]; -spinlock_t fst_work_q_lock; -u64 fst_work_txq; -u64 fst_work_intq; +static struct fst_card_info *fst_card_array[FST_MAX_CARDS]; +static spinlock_t fst_work_q_lock; +static u64 fst_work_txq; +static u64 fst_work_intq; static void fst_q_work_item(u64 * queue, int card_index) @@ -1497,7 +1497,7 @@ do_bottom_half_rx(struct fst_card_info *card) * The interrupt service routine * Dev_id is our fst_card_info pointer */ -irqreturn_t +static irqreturn_t fst_intr(int irq, void *dev_id, struct pt_regs *regs) { struct fst_card_info *card; diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index a5d6891c9d4c..e1601d35dced 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -330,7 +330,7 @@ static int pvc_close(struct net_device *dev) -int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +static int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { pvc_device *pvc = dev_to_pvc(dev); fr_proto_pvc_info info; diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c index 9dccd9546a17..3b94352b0d03 100644 --- a/drivers/net/wan/lmc/lmc_debug.c +++ b/drivers/net/wan/lmc/lmc_debug.c @@ -8,10 +8,10 @@ /* * Prints out len, max to 80 octets using printk, 20 per line */ -void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) -{ #ifdef DEBUG #ifdef LMC_PACKET_LOG +void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) +{ int iNewLine = 1; char str[80], *pstr; @@ -43,26 +43,24 @@ void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) } sprintf(pstr, "\n"); printk(str); +} #endif #endif -} #ifdef DEBUG u_int32_t lmcEventLogIndex = 0; u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; -#endif void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3) { -#ifdef DEBUG lmcEventLogBuf[lmcEventLogIndex++] = EventNum; lmcEventLogBuf[lmcEventLogIndex++] = arg2; lmcEventLogBuf[lmcEventLogIndex++] = arg3; lmcEventLogBuf[lmcEventLogIndex++] = jiffies; lmcEventLogIndex &= (LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS) - 1; -#endif } +#endif /* DEBUG */ void lmc_trace(struct net_device *dev, char *msg){ #ifdef LMC_TRACE diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c index f55ce76b00ed..af8b55fdd9d9 100644 --- a/drivers/net/wan/lmc/lmc_media.c +++ b/drivers/net/wan/lmc/lmc_media.c @@ -47,14 +47,6 @@ * of the GNU General Public License version 2, incorporated herein by reference. */ -/* - * For lack of a better place, put the SSI cable stuff here. - */ -char *lmc_t1_cables[] = { - "V.10/RS423", "EIA530A", "reserved", "X.21", "V.35", - "EIA449/EIA530/V.36", "V.28/EIA232", "none", NULL -}; - /* * protocol independent method. */ diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index 73401b0f0151..2024b26b99e6 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -472,24 +472,8 @@ enum pc300_loopback_cmds { #ifdef __KERNEL__ /* Function Prototypes */ -int dma_buf_write(pc300_t *, int, ucchar *, int); -int dma_buf_read(pc300_t *, int, struct sk_buff *); void tx_dma_start(pc300_t *, int); -void rx_dma_start(pc300_t *, int); -void tx_dma_stop(pc300_t *, int); -void rx_dma_stop(pc300_t *, int); -int cpc_queue_xmit(struct sk_buff *, struct net_device *); -void cpc_net_rx(struct net_device *); -void cpc_sca_status(pc300_t *, int); -int cpc_change_mtu(struct net_device *, int); -int cpc_ioctl(struct net_device *, struct ifreq *, int); -int ch_config(pc300dev_t *); -int rx_config(pc300dev_t *); -int tx_config(pc300dev_t *); -void cpc_opench(pc300dev_t *); -void cpc_closech(pc300dev_t *); int cpc_open(struct net_device *dev); -int cpc_close(struct net_device *dev); int cpc_set_media(hdlc_device *, int); #endif /* __KERNEL__ */ diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 3e7753b10717..a3e65d1bc19b 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -291,6 +291,7 @@ static uclong detect_ram(pc300_t *); static void plx_init(pc300_t *); static void cpc_trace(struct net_device *, struct sk_buff *, char); static int cpc_attach(struct net_device *, unsigned short, unsigned short); +static int cpc_close(struct net_device *dev); #ifdef CONFIG_PC300_MLPPP void cpc_tty_init(pc300dev_t * dev); @@ -437,7 +438,7 @@ static void rx_dma_buf_check(pc300_t * card, int ch) printk("\n"); } -int dma_get_rx_frame_size(pc300_t * card, int ch) +static int dma_get_rx_frame_size(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; ucshort first_bd = card->chan[ch].rx_first_bd; @@ -462,7 +463,7 @@ int dma_get_rx_frame_size(pc300_t * card, int ch) * dma_buf_write: writes a frame to the Tx DMA buffers * NOTE: this function writes one frame at a time. */ -int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) +static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) { int i, nchar; volatile pcsca_bd_t __iomem *ptdescr; @@ -503,7 +504,7 @@ int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) * dma_buf_read: reads a frame from the Rx DMA buffers * NOTE: this function reads one frame at a time. */ -int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) +static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) { int nchar; pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; @@ -560,7 +561,7 @@ int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) return (rcvd); } -void tx_dma_stop(pc300_t * card, int ch) +static void tx_dma_stop(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; ucchar drr_ena_bit = 1 << (5 + 2 * ch); @@ -571,7 +572,7 @@ void tx_dma_stop(pc300_t * card, int ch) cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); } -void rx_dma_stop(pc300_t * card, int ch) +static void rx_dma_stop(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; ucchar drr_ena_bit = 1 << (4 + 2 * ch); @@ -582,7 +583,7 @@ void rx_dma_stop(pc300_t * card, int ch) cpc_writeb(scabase + DRR, drr_rst_bit & ~drr_ena_bit); } -void rx_dma_start(pc300_t * card, int ch) +static void rx_dma_start(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; @@ -607,7 +608,7 @@ void rx_dma_start(pc300_t * card, int ch) /*************************/ /*** FALC Routines ***/ /*************************/ -void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) +static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) { void __iomem *falcbase = card->hw.falcbase; unsigned long i = 0; @@ -622,7 +623,7 @@ void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) cpc_writeb(falcbase + F_REG(CMDR, ch), cmd); } -void falc_intr_enable(pc300_t * card, int ch) +static void falc_intr_enable(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -672,7 +673,7 @@ void falc_intr_enable(pc300_t * card, int ch) } } -void falc_open_timeslot(pc300_t * card, int ch, int timeslot) +static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) { void __iomem *falcbase = card->hw.falcbase; ucchar tshf = card->chan[ch].falc.offset; @@ -688,7 +689,7 @@ void falc_open_timeslot(pc300_t * card, int ch, int timeslot) (0x80 >> (timeslot & 0x07))); } -void falc_close_timeslot(pc300_t * card, int ch, int timeslot) +static void falc_close_timeslot(pc300_t * card, int ch, int timeslot) { void __iomem *falcbase = card->hw.falcbase; ucchar tshf = card->chan[ch].falc.offset; @@ -704,7 +705,7 @@ void falc_close_timeslot(pc300_t * card, int ch, int timeslot) ~(0x80 >> (timeslot & 0x07))); } -void falc_close_all_timeslots(pc300_t * card, int ch) +static void falc_close_all_timeslots(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -726,7 +727,7 @@ void falc_close_all_timeslots(pc300_t * card, int ch) } } -void falc_open_all_timeslots(pc300_t * card, int ch) +static void falc_open_all_timeslots(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -758,7 +759,7 @@ void falc_open_all_timeslots(pc300_t * card, int ch) } } -void falc_init_timeslot(pc300_t * card, int ch) +static void falc_init_timeslot(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -776,7 +777,7 @@ void falc_init_timeslot(pc300_t * card, int ch) } } -void falc_enable_comm(pc300_t * card, int ch) +static void falc_enable_comm(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -792,7 +793,7 @@ void falc_enable_comm(pc300_t * card, int ch) ~((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); } -void falc_disable_comm(pc300_t * card, int ch) +static void falc_disable_comm(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -806,7 +807,7 @@ void falc_disable_comm(pc300_t * card, int ch) ((CPLD_REG1_FALC_DCD | CPLD_REG1_FALC_CTS) << (2 * ch))); } -void falc_init_t1(pc300_t * card, int ch) +static void falc_init_t1(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -975,7 +976,7 @@ void falc_init_t1(pc300_t * card, int ch) falc_close_all_timeslots(card, ch); } -void falc_init_e1(pc300_t * card, int ch) +static void falc_init_e1(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1155,7 +1156,7 @@ void falc_init_e1(pc300_t * card, int ch) falc_close_all_timeslots(card, ch); } -void falc_init_hdlc(pc300_t * card, int ch) +static void falc_init_hdlc(pc300_t * card, int ch) { void __iomem *falcbase = card->hw.falcbase; pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; @@ -1181,7 +1182,7 @@ void falc_init_hdlc(pc300_t * card, int ch) falc_intr_enable(card, ch); } -void te_config(pc300_t * card, int ch) +static void te_config(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1241,7 +1242,7 @@ void te_config(pc300_t * card, int ch) CPC_UNLOCK(card, flags); } -void falc_check_status(pc300_t * card, int ch, unsigned char frs0) +static void falc_check_status(pc300_t * card, int ch, unsigned char frs0) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1397,7 +1398,7 @@ void falc_check_status(pc300_t * card, int ch, unsigned char frs0) } } -void falc_update_stats(pc300_t * card, int ch) +static void falc_update_stats(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1450,7 +1451,7 @@ void falc_update_stats(pc300_t * card, int ch) * the synchronizer and then sent to the system interface. *---------------------------------------------------------------------------- */ -void falc_remote_loop(pc300_t * card, int ch, int loop_on) +static void falc_remote_loop(pc300_t * card, int ch, int loop_on) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1495,7 +1496,7 @@ void falc_remote_loop(pc300_t * card, int ch, int loop_on) * coding must be identical. *---------------------------------------------------------------------------- */ -void falc_local_loop(pc300_t * card, int ch, int loop_on) +static void falc_local_loop(pc300_t * card, int ch, int loop_on) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -1522,7 +1523,7 @@ void falc_local_loop(pc300_t * card, int ch, int loop_on) * looped. They are originated by the FALC-LH transmitter. *---------------------------------------------------------------------------- */ -void falc_payload_loop(pc300_t * card, int ch, int loop_on) +static void falc_payload_loop(pc300_t * card, int ch, int loop_on) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1576,7 +1577,7 @@ void falc_payload_loop(pc300_t * card, int ch, int loop_on) * Description: Turns XLU bit off in the proper register *---------------------------------------------------------------------------- */ -void turn_off_xlu(pc300_t * card, int ch) +static void turn_off_xlu(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1597,7 +1598,7 @@ void turn_off_xlu(pc300_t * card, int ch) * Description: Turns XLD bit off in the proper register *---------------------------------------------------------------------------- */ -void turn_off_xld(pc300_t * card, int ch) +static void turn_off_xld(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1619,7 +1620,7 @@ void turn_off_xld(pc300_t * card, int ch) * to generate a LOOP activation code over a T1/E1 line. *---------------------------------------------------------------------------- */ -void falc_generate_loop_up_code(pc300_t * card, int ch) +static void falc_generate_loop_up_code(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1652,7 +1653,7 @@ void falc_generate_loop_up_code(pc300_t * card, int ch) * to generate a LOOP deactivation code over a T1/E1 line. *---------------------------------------------------------------------------- */ -void falc_generate_loop_down_code(pc300_t * card, int ch) +static void falc_generate_loop_down_code(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1682,7 +1683,7 @@ void falc_generate_loop_down_code(pc300_t * card, int ch) * it on the reception side. *---------------------------------------------------------------------------- */ -void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) +static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -1729,7 +1730,7 @@ void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) * Description: This routine returns the bit error counter value *---------------------------------------------------------------------------- */ -ucshort falc_pattern_test_error(pc300_t * card, int ch) +static ucshort falc_pattern_test_error(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -1769,7 +1770,7 @@ cpc_trace(struct net_device *dev, struct sk_buff *skb_main, char rx_tx) netif_rx(skb); } -void cpc_tx_timeout(struct net_device *dev) +static void cpc_tx_timeout(struct net_device *dev) { pc300dev_t *d = (pc300dev_t *) dev->priv; pc300ch_t *chan = (pc300ch_t *) d->chan; @@ -1797,7 +1798,7 @@ void cpc_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } -int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) +static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) { pc300dev_t *d = (pc300dev_t *) dev->priv; pc300ch_t *chan = (pc300ch_t *) d->chan; @@ -1880,7 +1881,7 @@ int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } -void cpc_net_rx(struct net_device *dev) +static void cpc_net_rx(struct net_device *dev) { pc300dev_t *d = (pc300dev_t *) dev->priv; pc300ch_t *chan = (pc300ch_t *) d->chan; @@ -2403,7 +2404,7 @@ static irqreturn_t cpc_intr(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } -void cpc_sca_status(pc300_t * card, int ch) +static void cpc_sca_status(pc300_t * card, int ch) { ucchar ilar; void __iomem *scabase = card->hw.scabase; @@ -2495,7 +2496,7 @@ void cpc_sca_status(pc300_t * card, int ch) } } -void cpc_falc_status(pc300_t * card, int ch) +static void cpc_falc_status(pc300_t * card, int ch) { pc300ch_t *chan = &card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -2523,7 +2524,7 @@ void cpc_falc_status(pc300_t * card, int ch) CPC_UNLOCK(card, flags); } -int cpc_change_mtu(struct net_device *dev, int new_mtu) +static int cpc_change_mtu(struct net_device *dev, int new_mtu) { if ((new_mtu < 128) || (new_mtu > PC300_DEF_MTU)) return -EINVAL; @@ -2531,7 +2532,7 @@ int cpc_change_mtu(struct net_device *dev, int new_mtu) return 0; } -int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { hdlc_device *hdlc = dev_to_hdlc(dev); pc300dev_t *d = (pc300dev_t *) dev->priv; @@ -2856,7 +2857,7 @@ static int clock_rate_calc(uclong rate, uclong clock, int *br_io) } } -int ch_config(pc300dev_t * d) +static int ch_config(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; @@ -3004,7 +3005,7 @@ int ch_config(pc300dev_t * d) return 0; } -int rx_config(pc300dev_t * d) +static int rx_config(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3035,7 +3036,7 @@ int rx_config(pc300dev_t * d) return 0; } -int tx_config(pc300dev_t * d) +static int tx_config(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3098,7 +3099,7 @@ static int cpc_attach(struct net_device *dev, unsigned short encoding, return 0; } -void cpc_opench(pc300dev_t * d) +static void cpc_opench(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3116,7 +3117,7 @@ void cpc_opench(pc300dev_t * d) cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR)); } -void cpc_closech(pc300dev_t * d) +static void cpc_closech(pc300dev_t * d) { pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3173,7 +3174,7 @@ int cpc_open(struct net_device *dev) return 0; } -int cpc_close(struct net_device *dev) +static int cpc_close(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); pc300dev_t *d = (pc300dev_t *) dev->priv; diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c index 8454bf6caaa7..52f26b9c69d2 100644 --- a/drivers/net/wan/pc300_tty.c +++ b/drivers/net/wan/pc300_tty.c @@ -112,10 +112,10 @@ typedef struct _st_cpc_tty_area { static struct tty_driver serial_drv; /* local variables */ -st_cpc_tty_area cpc_tty_area[CPC_TTY_NPORTS]; +static st_cpc_tty_area cpc_tty_area[CPC_TTY_NPORTS]; -int cpc_tty_cnt=0; /* number of intrfaces configured with MLPPP */ -int cpc_tty_unreg_flag = 0; +static int cpc_tty_cnt = 0; /* number of intrfaces configured with MLPPP */ +static int cpc_tty_unreg_flag = 0; /* TTY functions prototype */ static int cpc_tty_open(struct tty_struct *tty, struct file *flip); @@ -132,9 +132,9 @@ static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx); static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char); static void cpc_tty_signal_on(pc300dev_t *pc300dev, unsigned char); -int pc300_tiocmset(struct tty_struct *, struct file *, - unsigned int, unsigned int); -int pc300_tiocmget(struct tty_struct *, struct file *); +static int pc300_tiocmset(struct tty_struct *, struct file *, + unsigned int, unsigned int); +static int pc300_tiocmget(struct tty_struct *, struct file *); /* functions called by PC300 driver */ void cpc_tty_init(pc300dev_t *dev); @@ -538,8 +538,8 @@ static int cpc_tty_chars_in_buffer(struct tty_struct *tty) return(0); } -int pc300_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +static int pc300_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { st_cpc_tty_area *cpc_tty; @@ -565,7 +565,7 @@ int pc300_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -int pc300_tiocmget(struct tty_struct *tty, struct file *file) +static int pc300_tiocmget(struct tty_struct *tty, struct file *file) { unsigned int result; unsigned char status; diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c index 3ac9a45b20fa..036adc4f8ba7 100644 --- a/drivers/net/wan/sdla.c +++ b/drivers/net/wan/sdla.c @@ -182,7 +182,7 @@ static char sdla_byte(struct net_device *dev, int addr) return(byte); } -void sdla_stop(struct net_device *dev) +static void sdla_stop(struct net_device *dev) { struct frad_local *flp; @@ -209,7 +209,7 @@ void sdla_stop(struct net_device *dev) } } -void sdla_start(struct net_device *dev) +static void sdla_start(struct net_device *dev) { struct frad_local *flp; @@ -247,7 +247,7 @@ void sdla_start(struct net_device *dev) * ***************************************************/ -int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2) +static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2) { unsigned long start, done, now; char resp, *temp; @@ -505,7 +505,7 @@ static int sdla_cmd(struct net_device *dev, int cmd, short dlci, short flags, static int sdla_reconfig(struct net_device *dev); -int sdla_activate(struct net_device *slave, struct net_device *master) +static int sdla_activate(struct net_device *slave, struct net_device *master) { struct frad_local *flp; int i; @@ -527,7 +527,7 @@ int sdla_activate(struct net_device *slave, struct net_device *master) return(0); } -int sdla_deactivate(struct net_device *slave, struct net_device *master) +static int sdla_deactivate(struct net_device *slave, struct net_device *master) { struct frad_local *flp; int i; @@ -549,7 +549,7 @@ int sdla_deactivate(struct net_device *slave, struct net_device *master) return(0); } -int sdla_assoc(struct net_device *slave, struct net_device *master) +static int sdla_assoc(struct net_device *slave, struct net_device *master) { struct frad_local *flp; int i; @@ -585,7 +585,7 @@ int sdla_assoc(struct net_device *slave, struct net_device *master) return(0); } -int sdla_deassoc(struct net_device *slave, struct net_device *master) +static int sdla_deassoc(struct net_device *slave, struct net_device *master) { struct frad_local *flp; int i; @@ -613,7 +613,7 @@ int sdla_deassoc(struct net_device *slave, struct net_device *master) return(0); } -int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get) +static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get) { struct frad_local *flp; struct dlci_local *dlp; @@ -1324,7 +1324,7 @@ NOTE: This is rather a useless action right now, as the return(0); } -int sdla_change_mtu(struct net_device *dev, int new_mtu) +static int sdla_change_mtu(struct net_device *dev, int new_mtu) { struct frad_local *flp; @@ -1337,7 +1337,7 @@ int sdla_change_mtu(struct net_device *dev, int new_mtu) return(-EOPNOTSUPP); } -int sdla_set_config(struct net_device *dev, struct ifmap *map) +static int sdla_set_config(struct net_device *dev, struct ifmap *map) { struct frad_local *flp; int i; diff --git a/drivers/net/wan/sdladrv.c b/drivers/net/wan/sdladrv.c index c8bc6da57a41..7c2cf2e76300 100644 --- a/drivers/net/wan/sdladrv.c +++ b/drivers/net/wan/sdladrv.c @@ -642,9 +642,7 @@ int sdla_mapmem (sdlahw_t* hw, unsigned long addr) * Enable interrupt generation. */ -EXPORT_SYMBOL(sdla_inten); - -int sdla_inten (sdlahw_t* hw) +static int sdla_inten (sdlahw_t* hw) { unsigned port = hw->port; int tmp, i; @@ -698,8 +696,7 @@ int sdla_inten (sdlahw_t* hw) * Disable interrupt generation. */ -EXPORT_SYMBOL(sdla_intde); - +#if 0 int sdla_intde (sdlahw_t* hw) { unsigned port = hw->port; @@ -748,14 +745,13 @@ int sdla_intde (sdlahw_t* hw) } return 0; } +#endif /* 0 */ /*============================================================================ * Acknowledge SDLA hardware interrupt. */ -EXPORT_SYMBOL(sdla_intack); - -int sdla_intack (sdlahw_t* hw) +static int sdla_intack (sdlahw_t* hw) { unsigned port = hw->port; int tmp; @@ -827,8 +823,7 @@ void read_S514_int_stat (sdlahw_t* hw, u32* int_status) * Generate an interrupt to adapter's CPU. */ -EXPORT_SYMBOL(sdla_intr); - +#if 0 int sdla_intr (sdlahw_t* hw) { unsigned port = hw->port; @@ -863,6 +858,7 @@ int sdla_intr (sdlahw_t* hw) } return 0; } +#endif /* 0 */ /*============================================================================ * Execute Adapter Command. diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index b56a7b516d24..3731b22f6757 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -221,7 +221,7 @@ static void sppp_clear_timeout(struct sppp *p) * here. */ -void sppp_input (struct net_device *dev, struct sk_buff *skb) +static void sppp_input (struct net_device *dev, struct sk_buff *skb) { struct ppp_header *h; struct sppp *sp = (struct sppp *)sppp_of(dev); @@ -355,8 +355,6 @@ void sppp_input (struct net_device *dev, struct sk_buff *skb) return; } -EXPORT_SYMBOL(sppp_input); - /* * Handle transmit packets. */ @@ -990,7 +988,7 @@ EXPORT_SYMBOL(sppp_reopen); * the mtu is out of range. */ -int sppp_change_mtu(struct net_device *dev, int new_mtu) +static int sppp_change_mtu(struct net_device *dev, int new_mtu) { if(new_mtu<128||new_mtu>PPP_MTU||(dev->flags&IFF_UP)) return -EINVAL; @@ -998,8 +996,6 @@ int sppp_change_mtu(struct net_device *dev, int new_mtu) return 0; } -EXPORT_SYMBOL(sppp_change_mtu); - /** * sppp_do_ioctl - Ioctl handler for ppp/hdlc * @dev: Device subject to ioctl @@ -1456,7 +1452,7 @@ static int sppp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_t return 0; } -struct packet_type sppp_packet_type = { +static struct packet_type sppp_packet_type = { .type = __constant_htons(ETH_P_WAN_PPP), .func = sppp_rcv, }; diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h index 6621df86a748..12fe6b0bfcff 100644 --- a/include/linux/cycx_drv.h +++ b/include/linux/cycx_drv.h @@ -60,6 +60,5 @@ extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len); extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len); extern int cycx_exec(void __iomem *addr); -extern void cycx_inten(struct cycx_hw *hw); extern void cycx_intr(struct cycx_hw *hw); #endif /* _CYCX_DRV_H */ diff --git a/include/linux/sdladrv.h b/include/linux/sdladrv.h index 78f634007fc6..c85e103d5e7b 100644 --- a/include/linux/sdladrv.h +++ b/include/linux/sdladrv.h @@ -52,12 +52,8 @@ typedef struct sdlahw extern int sdla_setup (sdlahw_t* hw, void* sfm, unsigned len); extern int sdla_down (sdlahw_t* hw); -extern int sdla_inten (sdlahw_t* hw); -extern int sdla_intde (sdlahw_t* hw); -extern int sdla_intack (sdlahw_t* hw); extern void S514_intack (sdlahw_t* hw, u32 int_status); extern void read_S514_int_stat (sdlahw_t* hw, u32* int_status); -extern int sdla_intr (sdlahw_t* hw); extern int sdla_mapmem (sdlahw_t* hw, unsigned long addr); extern int sdla_peek (sdlahw_t* hw, unsigned long addr, void* buf, unsigned len); diff --git a/include/net/syncppp.h b/include/net/syncppp.h index 614cb6ba564e..877efa434700 100644 --- a/include/net/syncppp.h +++ b/include/net/syncppp.h @@ -86,7 +86,6 @@ static inline struct sppp *sppp_of(struct net_device *dev) void sppp_attach (struct ppp_device *pd); void sppp_detach (struct net_device *dev); -void sppp_input (struct net_device *dev, struct sk_buff *m); int sppp_do_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd); struct sk_buff *sppp_dequeue (struct net_device *dev); int sppp_isempty (struct net_device *dev); -- GitLab From 387d890db88b4eb7c1dd55a2a0c16d6f0dccc7ad Mon Sep 17 00:00:00 2001 From: "viro@ZenIV.linux.org.uk" Date: Fri, 9 Sep 2005 17:22:14 +0100 Subject: [PATCH 0036/1519] [PATCH] lne390 bogus casts We already have the iomem pointer we need... Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/lne390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/lne390.c b/drivers/net/lne390.c index 27f0d8ac4c40..309d254842cf 100644 --- a/drivers/net/lne390.c +++ b/drivers/net/lne390.c @@ -298,7 +298,7 @@ static int __init lne390_probe1(struct net_device *dev, int ioaddr) return 0; unmap: if (ei_status.reg0) - iounmap((void *)dev->mem_start); + iounmap(ei_status.mem); cleanup: free_irq(dev->irq, dev); return ret; -- GitLab From 7a700fafbed55eee2cc766fbe47cf68e229da281 Mon Sep 17 00:00:00 2001 From: "viro@ZenIV.linux.org.uk" Date: Fri, 9 Sep 2005 20:40:23 +0100 Subject: [PATCH 0037/1519] [PATCH] C99 initializers in ray_cs.c Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/wireless/ray_cs.c | 46 +++++++++++++++++------------------ 1 file changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index e9c5ea0f5535..70fd6fd8feb9 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -1649,28 +1649,28 @@ static iw_stats * ray_get_wireless_stats(struct net_device * dev) */ static const iw_handler ray_handler[] = { - [SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) ray_commit, - [SIOCGIWNAME -SIOCIWFIRST] (iw_handler) ray_get_name, - [SIOCSIWFREQ -SIOCIWFIRST] (iw_handler) ray_set_freq, - [SIOCGIWFREQ -SIOCIWFIRST] (iw_handler) ray_get_freq, - [SIOCSIWMODE -SIOCIWFIRST] (iw_handler) ray_set_mode, - [SIOCGIWMODE -SIOCIWFIRST] (iw_handler) ray_get_mode, - [SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) ray_get_range, + [SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) ray_commit, + [SIOCGIWNAME -SIOCIWFIRST] = (iw_handler) ray_get_name, + [SIOCSIWFREQ -SIOCIWFIRST] = (iw_handler) ray_set_freq, + [SIOCGIWFREQ -SIOCIWFIRST] = (iw_handler) ray_get_freq, + [SIOCSIWMODE -SIOCIWFIRST] = (iw_handler) ray_set_mode, + [SIOCGIWMODE -SIOCIWFIRST] = (iw_handler) ray_get_mode, + [SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) ray_get_range, #ifdef WIRELESS_SPY - [SIOCSIWSPY -SIOCIWFIRST] (iw_handler) iw_handler_set_spy, - [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) iw_handler_get_spy, - [SIOCSIWTHRSPY-SIOCIWFIRST] (iw_handler) iw_handler_set_thrspy, - [SIOCGIWTHRSPY-SIOCIWFIRST] (iw_handler) iw_handler_get_thrspy, + [SIOCSIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_set_spy, + [SIOCGIWSPY -SIOCIWFIRST] = (iw_handler) iw_handler_get_spy, + [SIOCSIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_set_thrspy, + [SIOCGIWTHRSPY-SIOCIWFIRST] = (iw_handler) iw_handler_get_thrspy, #endif /* WIRELESS_SPY */ - [SIOCGIWAP -SIOCIWFIRST] (iw_handler) ray_get_wap, - [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) ray_set_essid, - [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) ray_get_essid, - [SIOCSIWRATE -SIOCIWFIRST] (iw_handler) ray_set_rate, - [SIOCGIWRATE -SIOCIWFIRST] (iw_handler) ray_get_rate, - [SIOCSIWRTS -SIOCIWFIRST] (iw_handler) ray_set_rts, - [SIOCGIWRTS -SIOCIWFIRST] (iw_handler) ray_get_rts, - [SIOCSIWFRAG -SIOCIWFIRST] (iw_handler) ray_set_frag, - [SIOCGIWFRAG -SIOCIWFIRST] (iw_handler) ray_get_frag, + [SIOCGIWAP -SIOCIWFIRST] = (iw_handler) ray_get_wap, + [SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) ray_set_essid, + [SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) ray_get_essid, + [SIOCSIWRATE -SIOCIWFIRST] = (iw_handler) ray_set_rate, + [SIOCGIWRATE -SIOCIWFIRST] = (iw_handler) ray_get_rate, + [SIOCSIWRTS -SIOCIWFIRST] = (iw_handler) ray_set_rts, + [SIOCGIWRTS -SIOCIWFIRST] = (iw_handler) ray_get_rts, + [SIOCSIWFRAG -SIOCIWFIRST] = (iw_handler) ray_set_frag, + [SIOCGIWFRAG -SIOCIWFIRST] = (iw_handler) ray_get_frag, }; #define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */ @@ -1678,9 +1678,9 @@ static const iw_handler ray_handler[] = { #define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */ static const iw_handler ray_private_handler[] = { - [0] (iw_handler) ray_set_framing, - [1] (iw_handler) ray_get_framing, - [3] (iw_handler) ray_get_country, + [0] = (iw_handler) ray_set_framing, + [1] = (iw_handler) ray_get_framing, + [3] = (iw_handler) ray_get_country, }; static const struct iw_priv_args ray_private_args[] = { -- GitLab From 43ec6e95e4d8a73afc2405a44b955c380aeeb65a Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Tue, 23 Aug 2005 10:30:29 -0700 Subject: [PATCH 0038/1519] [PATCH] mii: Add test for GigE support Signed-off-by: Dale Farnsworth Signed-off-by: Jeff Garzik --- drivers/net/mii.c | 15 +++++++++++++++ include/linux/mii.h | 1 + 2 files changed, 16 insertions(+) diff --git a/drivers/net/mii.c b/drivers/net/mii.c index c33cb3dc942b..e42aa797f08b 100644 --- a/drivers/net/mii.c +++ b/drivers/net/mii.c @@ -207,6 +207,20 @@ int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd) return 0; } +int mii_check_gmii_support(struct mii_if_info *mii) +{ + int reg; + + reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); + if (reg & BMSR_ESTATEN) { + reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS); + if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF)) + return 1; + } + + return 0; +} + int mii_link_ok (struct mii_if_info *mii) { /* first, a dummy read, needed to latch some MII phys */ @@ -394,5 +408,6 @@ EXPORT_SYMBOL(mii_ethtool_gset); EXPORT_SYMBOL(mii_ethtool_sset); EXPORT_SYMBOL(mii_check_link); EXPORT_SYMBOL(mii_check_media); +EXPORT_SYMBOL(mii_check_gmii_support); EXPORT_SYMBOL(generic_mii_ioctl); diff --git a/include/linux/mii.h b/include/linux/mii.h index 9b8d0476988a..68f5a0f392dd 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -158,6 +158,7 @@ extern int mii_link_ok (struct mii_if_info *mii); extern int mii_nway_restart (struct mii_if_info *mii); extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd); extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd); +extern int mii_check_gmii_support(struct mii_if_info *mii); extern void mii_check_link (struct mii_if_info *mii); extern unsigned int mii_check_media (struct mii_if_info *mii, unsigned int ok_to_print, -- GitLab From f89efd523b25cc1702e074dafdcac283da657002 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 9 Sep 2005 12:10:10 -0700 Subject: [PATCH 0039/1519] [PATCH] Add rapidio net driver Adds an "Ethernet" driver which sends Ethernet packets over the standard RapidIO messaging. This depends on the core RIO patch for mailbox/doorbell access. Signed-off-by: Matt Porter Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 14 ++ drivers/net/Makefile | 1 + drivers/net/rionet.c | 574 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 589 insertions(+) create mode 100644 drivers/net/rionet.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 54fff9c2e802..82603e419d76 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2235,6 +2235,20 @@ config ISERIES_VETH tristate "iSeries Virtual Ethernet driver support" depends on PPC_ISERIES +config RIONET + tristate "RapidIO Ethernet over messaging driver support" + depends on NETDEVICES && RAPIDIO + +config RIONET_TX_SIZE + int "Number of outbound queue entries" + depends on RIONET + default "128" + +config RIONET_RX_SIZE + int "Number of inbound queue entries" + depends on RIONET + default "128" + config FDDI bool "FDDI driver support" depends on (PCI || EISA) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 8645c843cf4d..e6acba68923a 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o +obj-$(CONFIG_RIONET) += rionet.o # # end link order section diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c new file mode 100644 index 000000000000..12cde0604580 --- /dev/null +++ b/drivers/net/rionet.c @@ -0,0 +1,574 @@ +/* + * rionet - Ethernet driver over RapidIO messaging services + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "rionet" +#define DRV_VERSION "0.2" +#define DRV_AUTHOR "Matt Porter " +#define DRV_DESC "Ethernet over RapidIO" + +MODULE_AUTHOR(DRV_AUTHOR); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); + +#define RIONET_DEFAULT_MSGLEVEL \ + (NETIF_MSG_DRV | \ + NETIF_MSG_LINK | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) + +#define RIONET_DOORBELL_JOIN 0x1000 +#define RIONET_DOORBELL_LEAVE 0x1001 + +#define RIONET_MAILBOX 0 + +#define RIONET_TX_RING_SIZE CONFIG_RIONET_TX_SIZE +#define RIONET_RX_RING_SIZE CONFIG_RIONET_RX_SIZE + +static LIST_HEAD(rionet_peers); + +struct rionet_private { + struct rio_mport *mport; + struct sk_buff *rx_skb[RIONET_RX_RING_SIZE]; + struct sk_buff *tx_skb[RIONET_TX_RING_SIZE]; + struct net_device_stats stats; + int rx_slot; + int tx_slot; + int tx_cnt; + int ack_slot; + spinlock_t lock; + spinlock_t tx_lock; + u32 msg_enable; +}; + +struct rionet_peer { + struct list_head node; + struct rio_dev *rdev; + struct resource *res; +}; + +static int rionet_check = 0; +static int rionet_capable = 1; + +/* + * This is a fast lookup table for for translating TX + * Ethernet packets into a destination RIO device. It + * could be made into a hash table to save memory depending + * on system trade-offs. + */ +static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES]; + +#define is_rionet_capable(pef, src_ops, dst_ops) \ + ((pef & RIO_PEF_INB_MBOX) && \ + (pef & RIO_PEF_INB_DOORBELL) && \ + (src_ops & RIO_SRC_OPS_DOORBELL) && \ + (dst_ops & RIO_DST_OPS_DOORBELL)) +#define dev_rionet_capable(dev) \ + is_rionet_capable(dev->pef, dev->src_ops, dev->dst_ops) + +#define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001) +#define RIONET_GET_DESTID(x) (*(u16 *)(x + 4)) + +static struct net_device_stats *rionet_stats(struct net_device *ndev) +{ + struct rionet_private *rnet = ndev->priv; + return &rnet->stats; +} + +static int rionet_rx_clean(struct net_device *ndev) +{ + int i; + int error = 0; + struct rionet_private *rnet = ndev->priv; + void *data; + + i = rnet->rx_slot; + + do { + if (!rnet->rx_skb[i]) + continue; + + if (!(data = rio_get_inb_message(rnet->mport, RIONET_MAILBOX))) + break; + + rnet->rx_skb[i]->data = data; + skb_put(rnet->rx_skb[i], RIO_MAX_MSG_SIZE); + rnet->rx_skb[i]->dev = ndev; + rnet->rx_skb[i]->protocol = + eth_type_trans(rnet->rx_skb[i], ndev); + error = netif_rx(rnet->rx_skb[i]); + + if (error == NET_RX_DROP) { + rnet->stats.rx_dropped++; + } else if (error == NET_RX_BAD) { + if (netif_msg_rx_err(rnet)) + printk(KERN_WARNING "%s: bad rx packet\n", + DRV_NAME); + rnet->stats.rx_errors++; + } else { + rnet->stats.rx_packets++; + rnet->stats.rx_bytes += RIO_MAX_MSG_SIZE; + } + + } while ((i = (i + 1) % RIONET_RX_RING_SIZE) != rnet->rx_slot); + + return i; +} + +static void rionet_rx_fill(struct net_device *ndev, int end) +{ + int i; + struct rionet_private *rnet = ndev->priv; + + i = rnet->rx_slot; + do { + rnet->rx_skb[i] = dev_alloc_skb(RIO_MAX_MSG_SIZE); + + if (!rnet->rx_skb[i]) + break; + + rio_add_inb_buffer(rnet->mport, RIONET_MAILBOX, + rnet->rx_skb[i]->data); + } while ((i = (i + 1) % RIONET_RX_RING_SIZE) != end); + + rnet->rx_slot = i; +} + +static int rionet_queue_tx_msg(struct sk_buff *skb, struct net_device *ndev, + struct rio_dev *rdev) +{ + struct rionet_private *rnet = ndev->priv; + + rio_add_outb_message(rnet->mport, rdev, 0, skb->data, skb->len); + rnet->tx_skb[rnet->tx_slot] = skb; + + rnet->stats.tx_packets++; + rnet->stats.tx_bytes += skb->len; + + if (++rnet->tx_cnt == RIONET_TX_RING_SIZE) + netif_stop_queue(ndev); + + ++rnet->tx_slot; + rnet->tx_slot &= (RIONET_TX_RING_SIZE - 1); + + if (netif_msg_tx_queued(rnet)) + printk(KERN_INFO "%s: queued skb %8.8x len %8.8x\n", DRV_NAME, + (u32) skb, skb->len); + + return 0; +} + +static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + int i; + struct rionet_private *rnet = ndev->priv; + struct ethhdr *eth = (struct ethhdr *)skb->data; + u16 destid; + unsigned long flags; + + local_irq_save(flags); + if (!spin_trylock(&rnet->tx_lock)) { + local_irq_restore(flags); + return NETDEV_TX_LOCKED; + } + + if ((rnet->tx_cnt + 1) > RIONET_TX_RING_SIZE) { + netif_stop_queue(ndev); + spin_unlock_irqrestore(&rnet->tx_lock, flags); + printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n", + ndev->name); + return NETDEV_TX_BUSY; + } + + if (eth->h_dest[0] & 0x01) { + for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) + if (rionet_active[i]) + rionet_queue_tx_msg(skb, ndev, + rionet_active[i]); + } else if (RIONET_MAC_MATCH(eth->h_dest)) { + destid = RIONET_GET_DESTID(eth->h_dest); + if (rionet_active[destid]) + rionet_queue_tx_msg(skb, ndev, rionet_active[destid]); + } + + spin_unlock_irqrestore(&rnet->tx_lock, flags); + + return 0; +} + +static void rionet_dbell_event(struct rio_mport *mport, void *dev_id, u16 sid, u16 tid, + u16 info) +{ + struct net_device *ndev = dev_id; + struct rionet_private *rnet = ndev->priv; + struct rionet_peer *peer; + + if (netif_msg_intr(rnet)) + printk(KERN_INFO "%s: doorbell sid %4.4x tid %4.4x info %4.4x", + DRV_NAME, sid, tid, info); + if (info == RIONET_DOORBELL_JOIN) { + if (!rionet_active[sid]) { + list_for_each_entry(peer, &rionet_peers, node) { + if (peer->rdev->destid == sid) + rionet_active[sid] = peer->rdev; + } + rio_mport_send_doorbell(mport, sid, + RIONET_DOORBELL_JOIN); + } + } else if (info == RIONET_DOORBELL_LEAVE) { + rionet_active[sid] = NULL; + } else { + if (netif_msg_intr(rnet)) + printk(KERN_WARNING "%s: unhandled doorbell\n", + DRV_NAME); + } +} + +static void rionet_inb_msg_event(struct rio_mport *mport, void *dev_id, int mbox, int slot) +{ + int n; + struct net_device *ndev = dev_id; + struct rionet_private *rnet = (struct rionet_private *)ndev->priv; + + if (netif_msg_intr(rnet)) + printk(KERN_INFO "%s: inbound message event, mbox %d slot %d\n", + DRV_NAME, mbox, slot); + + spin_lock(&rnet->lock); + if ((n = rionet_rx_clean(ndev)) != rnet->rx_slot) + rionet_rx_fill(ndev, n); + spin_unlock(&rnet->lock); +} + +static void rionet_outb_msg_event(struct rio_mport *mport, void *dev_id, int mbox, int slot) +{ + struct net_device *ndev = dev_id; + struct rionet_private *rnet = ndev->priv; + + spin_lock(&rnet->lock); + + if (netif_msg_intr(rnet)) + printk(KERN_INFO + "%s: outbound message event, mbox %d slot %d\n", + DRV_NAME, mbox, slot); + + while (rnet->tx_cnt && (rnet->ack_slot != slot)) { + /* dma unmap single */ + dev_kfree_skb_irq(rnet->tx_skb[rnet->ack_slot]); + rnet->tx_skb[rnet->ack_slot] = NULL; + ++rnet->ack_slot; + rnet->ack_slot &= (RIONET_TX_RING_SIZE - 1); + rnet->tx_cnt--; + } + + if (rnet->tx_cnt < RIONET_TX_RING_SIZE) + netif_wake_queue(ndev); + + spin_unlock(&rnet->lock); +} + +static int rionet_open(struct net_device *ndev) +{ + int i, rc = 0; + struct rionet_peer *peer, *tmp; + u32 pwdcsr; + struct rionet_private *rnet = ndev->priv; + + if (netif_msg_ifup(rnet)) + printk(KERN_INFO "%s: open\n", DRV_NAME); + + if ((rc = rio_request_inb_dbell(rnet->mport, + (void *)ndev, + RIONET_DOORBELL_JOIN, + RIONET_DOORBELL_LEAVE, + rionet_dbell_event)) < 0) + goto out; + + if ((rc = rio_request_inb_mbox(rnet->mport, + (void *)ndev, + RIONET_MAILBOX, + RIONET_RX_RING_SIZE, + rionet_inb_msg_event)) < 0) + goto out; + + if ((rc = rio_request_outb_mbox(rnet->mport, + (void *)ndev, + RIONET_MAILBOX, + RIONET_TX_RING_SIZE, + rionet_outb_msg_event)) < 0) + goto out; + + /* Initialize inbound message ring */ + for (i = 0; i < RIONET_RX_RING_SIZE; i++) + rnet->rx_skb[i] = NULL; + rnet->rx_slot = 0; + rionet_rx_fill(ndev, 0); + + rnet->tx_slot = 0; + rnet->tx_cnt = 0; + rnet->ack_slot = 0; + + netif_carrier_on(ndev); + netif_start_queue(ndev); + + list_for_each_entry_safe(peer, tmp, &rionet_peers, node) { + if (!(peer->res = rio_request_outb_dbell(peer->rdev, + RIONET_DOORBELL_JOIN, + RIONET_DOORBELL_LEAVE))) + { + printk(KERN_ERR "%s: error requesting doorbells\n", + DRV_NAME); + continue; + } + + /* + * If device has initialized inbound doorbells, + * send a join message + */ + rio_read_config_32(peer->rdev, RIO_WRITE_PORT_CSR, &pwdcsr); + if (pwdcsr & RIO_DOORBELL_AVAIL) + rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN); + } + + out: + return rc; +} + +static int rionet_close(struct net_device *ndev) +{ + struct rionet_private *rnet = (struct rionet_private *)ndev->priv; + struct rionet_peer *peer, *tmp; + int i; + + if (netif_msg_ifup(rnet)) + printk(KERN_INFO "%s: close\n", DRV_NAME); + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + for (i = 0; i < RIONET_RX_RING_SIZE; i++) + if (rnet->rx_skb[i]) + kfree_skb(rnet->rx_skb[i]); + + list_for_each_entry_safe(peer, tmp, &rionet_peers, node) { + if (rionet_active[peer->rdev->destid]) { + rio_send_doorbell(peer->rdev, RIONET_DOORBELL_LEAVE); + rionet_active[peer->rdev->destid] = NULL; + } + rio_release_outb_dbell(peer->rdev, peer->res); + } + + rio_release_inb_dbell(rnet->mport, RIONET_DOORBELL_JOIN, + RIONET_DOORBELL_LEAVE); + rio_release_inb_mbox(rnet->mport, RIONET_MAILBOX); + rio_release_outb_mbox(rnet->mport, RIONET_MAILBOX); + + return 0; +} + +static void rionet_remove(struct rio_dev *rdev) +{ + struct net_device *ndev = NULL; + struct rionet_peer *peer, *tmp; + + unregister_netdev(ndev); + kfree(ndev); + + list_for_each_entry_safe(peer, tmp, &rionet_peers, node) { + list_del(&peer->node); + kfree(peer); + } +} + +static void rionet_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *info) +{ + struct rionet_private *rnet = ndev->priv; + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "n/a"); + strcpy(info->bus_info, rnet->mport->name); +} + +static u32 rionet_get_msglevel(struct net_device *ndev) +{ + struct rionet_private *rnet = ndev->priv; + + return rnet->msg_enable; +} + +static void rionet_set_msglevel(struct net_device *ndev, u32 value) +{ + struct rionet_private *rnet = ndev->priv; + + rnet->msg_enable = value; +} + +static struct ethtool_ops rionet_ethtool_ops = { + .get_drvinfo = rionet_get_drvinfo, + .get_msglevel = rionet_get_msglevel, + .set_msglevel = rionet_set_msglevel, + .get_link = ethtool_op_get_link, +}; + +static int rionet_setup_netdev(struct rio_mport *mport) +{ + int rc = 0; + struct net_device *ndev = NULL; + struct rionet_private *rnet; + u16 device_id; + + /* Allocate our net_device structure */ + ndev = alloc_etherdev(sizeof(struct rionet_private)); + if (ndev == NULL) { + printk(KERN_INFO "%s: could not allocate ethernet device.\n", + DRV_NAME); + rc = -ENOMEM; + goto out; + } + + /* Set up private area */ + rnet = (struct rionet_private *)ndev->priv; + rnet->mport = mport; + + /* Set the default MAC address */ + device_id = rio_local_get_device_id(mport); + ndev->dev_addr[0] = 0x00; + ndev->dev_addr[1] = 0x01; + ndev->dev_addr[2] = 0x00; + ndev->dev_addr[3] = 0x01; + ndev->dev_addr[4] = device_id >> 8; + ndev->dev_addr[5] = device_id & 0xff; + + /* Fill in the driver function table */ + ndev->open = &rionet_open; + ndev->hard_start_xmit = &rionet_start_xmit; + ndev->stop = &rionet_close; + ndev->get_stats = &rionet_stats; + ndev->mtu = RIO_MAX_MSG_SIZE - 14; + ndev->features = NETIF_F_LLTX; + SET_ETHTOOL_OPS(ndev, &rionet_ethtool_ops); + + SET_MODULE_OWNER(ndev); + + spin_lock_init(&rnet->lock); + spin_lock_init(&rnet->tx_lock); + + rnet->msg_enable = RIONET_DEFAULT_MSGLEVEL; + + rc = register_netdev(ndev); + if (rc != 0) + goto out; + + printk("%s: %s %s Version %s, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + ndev->name, + DRV_NAME, + DRV_DESC, + DRV_VERSION, + ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], + ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); + + out: + return rc; +} + +/* + * XXX Make multi-net safe + */ +static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) +{ + int rc = -ENODEV; + u32 lpef, lsrc_ops, ldst_ops; + struct rionet_peer *peer; + + /* If local device is not rionet capable, give up quickly */ + if (!rionet_capable) + goto out; + + /* + * First time through, make sure local device is rionet + * capable, setup netdev, and set flags so this is skipped + * on later probes + */ + if (!rionet_check) { + rio_local_read_config_32(rdev->net->hport, RIO_PEF_CAR, &lpef); + rio_local_read_config_32(rdev->net->hport, RIO_SRC_OPS_CAR, + &lsrc_ops); + rio_local_read_config_32(rdev->net->hport, RIO_DST_OPS_CAR, + &ldst_ops); + if (!is_rionet_capable(lpef, lsrc_ops, ldst_ops)) { + printk(KERN_ERR + "%s: local device is not network capable\n", + DRV_NAME); + rionet_check = 1; + rionet_capable = 0; + goto out; + } + + rc = rionet_setup_netdev(rdev->net->hport); + rionet_check = 1; + } + + /* + * If the remote device has mailbox/doorbell capabilities, + * add it to the peer list. + */ + if (dev_rionet_capable(rdev)) { + if (!(peer = kmalloc(sizeof(struct rionet_peer), GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + peer->rdev = rdev; + list_add_tail(&peer->node, &rionet_peers); + } + + out: + return rc; +} + +static struct rio_device_id rionet_id_table[] = { + {RIO_DEVICE(RIO_ANY_ID, RIO_ANY_ID)} +}; + +static struct rio_driver rionet_driver = { + .name = "rionet", + .id_table = rionet_id_table, + .probe = rionet_probe, + .remove = rionet_remove, +}; + +static int __init rionet_init(void) +{ + return rio_register_driver(&rionet_driver); +} + +static void __exit rionet_exit(void) +{ + rio_unregister_driver(&rionet_driver); +} + +module_init(rionet_init); +module_exit(rionet_exit); -- GitLab From 0b9afede3d9c66fef06f1d5ef5ff15c4b97730fc Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 6 Sep 2005 11:20:49 -0600 Subject: [PATCH 0040/1519] [IA64] more robust zx1/sx1000 machvec support Machine vector selection has always been a bit of a hack given how early in system boot it needs to be done. Services like ACPI namespace are not available and there are non-trivial problems to moving them to early boot. However, there's no reason we can't change to a different machvec later in boot when the services we need are available. By adding a entry point for later initialization of the swiotlb, we can add an error path for the hpzx1 machevec initialization and fall back to the DIG machine vector if IOMMU hardware isn't found in the system. Since ia64 uses 4GB for zone DMA (no ISA support), it's trivial to allocate a contiguous range from the slab for bounce buffer usage. Signed-off-by: Alex Williamson Signed-off-by: Tony Luck --- arch/ia64/hp/common/hwsw_iommu.c | 13 ++- arch/ia64/hp/common/sba_iommu.c | 45 +++++++--- arch/ia64/lib/swiotlb.c | 102 +++++++++++++++++++++++ include/asm-ia64/machvec_hpzx1.h | 21 +++-- include/asm-ia64/machvec_hpzx1_swiotlb.h | 3 +- 5 files changed, 156 insertions(+), 28 deletions(-) diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 80f8ef013939..317c334c5a18 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -17,7 +17,7 @@ #include /* swiotlb declarations & definitions: */ -extern void swiotlb_init_with_default_size (size_t size); +extern int swiotlb_late_init_with_default_size (size_t size); extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; extern ia64_mv_dma_free_coherent swiotlb_free_coherent; extern ia64_mv_dma_map_single swiotlb_map_single; @@ -67,7 +67,16 @@ void hwsw_init (void) { /* default to a smallish 2MB sw I/O TLB */ - swiotlb_init_with_default_size (2 * (1<<20)); + if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) { +#ifdef CONFIG_IA64_GENERIC + /* Better to have normal DMA than panic */ + printk(KERN_WARNING "%s: Failed to initialize software I/O TLB," + " reverting to hpzx1 platform vector\n", __FUNCTION__); + machvec_init("hpzx1"); +#else + panic("Unable to initialize software I/O TLB services"); +#endif + } } void * diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 11957598a8b9..e64ca04ace89 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -2028,9 +2028,40 @@ static struct acpi_driver acpi_sba_ioc_driver = { static int __init sba_init(void) { + if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb")) + return 0; + acpi_bus_register_driver(&acpi_sba_ioc_driver); - if (!ioc_list) + if (!ioc_list) { +#ifdef CONFIG_IA64_GENERIC + extern int swiotlb_late_init_with_default_size (size_t size); + + /* + * If we didn't find something sba_iommu can claim, we + * need to setup the swiotlb and switch to the dig machvec. + */ + if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0) + panic("Unable to find SBA IOMMU or initialize " + "software I/O TLB: Try machvec=dig boot option"); + machvec_init("dig"); +#else + panic("Unable to find SBA IOMMU: Try a generic or DIG kernel"); +#endif return 0; + } + +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB) + /* + * hpzx1_swiotlb needs to have a fairly small swiotlb bounce + * buffer setup to support devices with smaller DMA masks than + * sba_iommu can handle. + */ + if (ia64_platform_is("hpzx1_swiotlb")) { + extern void hwsw_init(void); + + hwsw_init(); + } +#endif #ifdef CONFIG_PCI { @@ -2048,18 +2079,6 @@ sba_init(void) subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */ -extern void dig_setup(char**); -/* - * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good, - * so we use the platform_setup hook to fix it up. - */ -void __init -sba_setup(char **cmdline_p) -{ - MAX_DMA_ADDRESS = ~0UL; - dig_setup(cmdline_p); -} - static int __init nosbagart(char *str) { diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c index dbc0b3e449c5..875b0c16250c 100644 --- a/arch/ia64/lib/swiotlb.c +++ b/arch/ia64/lib/swiotlb.c @@ -49,6 +49,15 @@ */ #define IO_TLB_SHIFT 11 +#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) + +/* + * Minimum IO TLB size to bother booting with. Systems with mainly + * 64bit capable cards will only lightly use the swiotlb. If we can't + * allocate a contiguous 1MB, we're probably in trouble anyway. + */ +#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) + int swiotlb_force; /* @@ -154,6 +163,99 @@ swiotlb_init (void) swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */ } +/* + * Systems with larger DMA zones (those that don't support ISA) can + * initialize the swiotlb later using the slab allocator if needed. + * This should be just like above, but with some error catching. + */ +int +swiotlb_late_init_with_default_size (size_t default_size) +{ + unsigned long i, req_nslabs = io_tlb_nslabs; + unsigned int order; + + if (!io_tlb_nslabs) { + io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); + io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); + } + + /* + * Get IO TLB memory from the low pages + */ + order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT)); + io_tlb_nslabs = SLABS_PER_PAGE << order; + + while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { + io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN, + order); + if (io_tlb_start) + break; + order--; + } + + if (!io_tlb_start) + goto cleanup1; + + if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) { + printk(KERN_WARNING "Warning: only able to allocate %ld MB " + "for software IO TLB\n", (PAGE_SIZE << order) >> 20); + io_tlb_nslabs = SLABS_PER_PAGE << order; + } + io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); + memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT)); + + /* + * Allocate and initialize the free list array. This array is used + * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE + * between io_tlb_start and io_tlb_end. + */ + io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL, + get_order(io_tlb_nslabs * sizeof(int))); + if (!io_tlb_list) + goto cleanup2; + + for (i = 0; i < io_tlb_nslabs; i++) + io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); + io_tlb_index = 0; + + io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL, + get_order(io_tlb_nslabs * sizeof(char *))); + if (!io_tlb_orig_addr) + goto cleanup3; + + memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *)); + + /* + * Get the overflow emergency buffer + */ + io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA, + get_order(io_tlb_overflow)); + if (!io_tlb_overflow_buffer) + goto cleanup4; + + printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - " + "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20, + virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); + + return 0; + +cleanup4: + free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs * + sizeof(char *))); + io_tlb_orig_addr = NULL; +cleanup3: + free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs * + sizeof(int))); + io_tlb_list = NULL; + io_tlb_end = NULL; +cleanup2: + free_pages((unsigned long)io_tlb_start, order); + io_tlb_start = NULL; +cleanup1: + io_tlb_nslabs = req_nslabs; + return -ENOMEM; +} + static inline int address_needs_mapping(struct device *hwdev, dma_addr_t addr) { diff --git a/include/asm-ia64/machvec_hpzx1.h b/include/asm-ia64/machvec_hpzx1.h index daafe504c5f4..e90daf9ce340 100644 --- a/include/asm-ia64/machvec_hpzx1.h +++ b/include/asm-ia64/machvec_hpzx1.h @@ -1,8 +1,7 @@ #ifndef _ASM_IA64_MACHVEC_HPZX1_h #define _ASM_IA64_MACHVEC_HPZX1_h -extern ia64_mv_setup_t dig_setup; -extern ia64_mv_setup_t sba_setup; +extern ia64_mv_setup_t dig_setup; extern ia64_mv_dma_alloc_coherent sba_alloc_coherent; extern ia64_mv_dma_free_coherent sba_free_coherent; extern ia64_mv_dma_map_single sba_map_single; @@ -19,15 +18,15 @@ extern ia64_mv_dma_mapping_error sba_dma_mapping_error; * platform's machvec structure. When compiling a non-generic kernel, * the macros are used directly. */ -#define platform_name "hpzx1" -#define platform_setup sba_setup -#define platform_dma_init machvec_noop -#define platform_dma_alloc_coherent sba_alloc_coherent -#define platform_dma_free_coherent sba_free_coherent -#define platform_dma_map_single sba_map_single -#define platform_dma_unmap_single sba_unmap_single -#define platform_dma_map_sg sba_map_sg -#define platform_dma_unmap_sg sba_unmap_sg +#define platform_name "hpzx1" +#define platform_setup dig_setup +#define platform_dma_init machvec_noop +#define platform_dma_alloc_coherent sba_alloc_coherent +#define platform_dma_free_coherent sba_free_coherent +#define platform_dma_map_single sba_map_single +#define platform_dma_unmap_single sba_unmap_single +#define platform_dma_map_sg sba_map_sg +#define platform_dma_unmap_sg sba_unmap_sg #define platform_dma_sync_single_for_cpu machvec_dma_sync_single #define platform_dma_sync_sg_for_cpu machvec_dma_sync_sg #define platform_dma_sync_single_for_device machvec_dma_sync_single diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/include/asm-ia64/machvec_hpzx1_swiotlb.h index 9924b1b00a6c..f00a34a148ff 100644 --- a/include/asm-ia64/machvec_hpzx1_swiotlb.h +++ b/include/asm-ia64/machvec_hpzx1_swiotlb.h @@ -2,7 +2,6 @@ #define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h extern ia64_mv_setup_t dig_setup; -extern ia64_mv_dma_init hwsw_init; extern ia64_mv_dma_alloc_coherent hwsw_alloc_coherent; extern ia64_mv_dma_free_coherent hwsw_free_coherent; extern ia64_mv_dma_map_single hwsw_map_single; @@ -26,7 +25,7 @@ extern ia64_mv_dma_sync_sg_for_device hwsw_sync_sg_for_device; #define platform_name "hpzx1_swiotlb" #define platform_setup dig_setup -#define platform_dma_init hwsw_init +#define platform_dma_init machvec_noop #define platform_dma_alloc_coherent hwsw_alloc_coherent #define platform_dma_free_coherent hwsw_free_coherent #define platform_dma_map_single hwsw_map_single -- GitLab From f2b518d71636c2bda65a837b0a93c3365207a4f0 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 14 Sep 2005 16:50:19 -0600 Subject: [PATCH 0041/1519] [IA64] Update default configs PNP and PNPACPI turned on i8042 recently changed from ACPI to PNP detection. Without PNP, it probes legacy I/O ports for the keyboard controller, which causes an MCA on HP boxes. Also, I'm about to remove 8250_acpi.c, so we'll need PNP to detect non-PCI serial ports. Until 8250_acpi.c is removed, some systems will see serial ports reported twice (once from 8250_acpi.c and again from 8250_pnp.c). This is harmless. PNPACPI is still marked EXPERIMENTAL, but I'm not aware of any outstanding issues on ia64. IDE_GENERIC turned off (except for SGI simulator, all ia64 IDE is PCI) ide-generic probes compiled-in legacy I/O ports for IDE devices, which again causes an MCA. It would be nicer to just get rid of all the legacy junk from include/asm-ia64/ide.h, but that is a bit riskier because it could break ide-cs and the HDIO_REGISTER_HWIF ioctl (http://www.ussg.iu.edu/hypermail/linux/kernel/0508.2/0049.html). Here's the essence of the patch: -# CONFIG_PNP is not set +CONFIG_PNP=y +CONFIG_PNPACPI=y -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set Tested on tiger, bigsur, and zx1. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/configs/bigsur_defconfig | 395 +++++++++++++++++++---------- arch/ia64/configs/tiger_defconfig | 86 +++++-- arch/ia64/configs/zx1_defconfig | 92 +++++-- arch/ia64/defconfig | 265 ++++++++++++------- 4 files changed, 576 insertions(+), 262 deletions(-) diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 3b65cbb31b1d..b40672bb3ab0 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-rc2 -# Mon Nov 29 13:27:48 2004 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:18:49 2005 # # @@ -10,34 +10,40 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -58,12 +64,15 @@ CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set # CONFIG_IA64_HP_SIM is not set CONFIG_ITANIUM=y @@ -72,17 +81,30 @@ CONFIG_ITANIUM=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_BRL_EMU=y CONFIG_IA64_L1_CACHE_SHIFT=6 # CONFIG_NUMA is not set # CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set +# CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -95,6 +117,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -102,18 +125,26 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y +# CONFIG_ACPI_CONTAINER is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA) @@ -122,7 +153,7 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCI Hotplug Support @@ -135,8 +166,70 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing # +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -150,6 +243,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -163,7 +261,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -172,14 +276,15 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -189,6 +294,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -211,7 +317,8 @@ CONFIG_BLK_DEV_IDEFLOPPY=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=m +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set @@ -233,6 +340,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=m +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -250,6 +358,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -261,6 +370,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -274,6 +384,8 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -288,18 +400,13 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLOGIC_1280_1040 is not set @@ -309,7 +416,8 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -332,11 +440,14 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -349,78 +460,25 @@ CONFIG_DM_ZERO=m # CONFIG_I2O is not set # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -443,7 +501,6 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -465,13 +522,17 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -496,6 +557,8 @@ CONFIG_EEPRO100=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -524,18 +587,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -553,6 +604,17 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -571,7 +633,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -579,6 +640,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -603,14 +665,22 @@ CONFIG_EFI_RTC=y # CONFIG_AGP=m CONFIG_AGP_I460=m -CONFIG_DRM=y +CONFIG_DRM=m # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=m # CONFIG_DRM_RADEON is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -635,7 +705,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -651,16 +721,43 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -671,33 +768,26 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus +# Misc devices # -# CONFIG_W1 is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -752,11 +842,12 @@ CONFIG_SND_OPL3_LIB=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # # PCI devices # -CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -768,6 +859,8 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_CS46XX is not set CONFIG_SND_CS4281=m # CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -775,9 +868,10 @@ CONFIG_SND_CS4281=m # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -791,13 +885,14 @@ CONFIG_SND_CS4281=m # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set # # Open Sound System @@ -807,6 +902,8 @@ CONFIG_SND_CS4281=m # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -818,35 +915,38 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -CONFIG_USB_AUDIO=m +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_BLUETOOTH_TTY=m -CONFIG_USB_MIDI=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -863,19 +963,23 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -894,6 +998,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -909,7 +1014,6 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -918,10 +1022,12 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -929,11 +1035,26 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_GADGET is not set +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -945,17 +1066,20 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -982,14 +1106,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1013,15 +1134,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1031,9 +1155,11 @@ CONFIG_CIFS=m CONFIG_CIFS_STATS=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1103,8 +1229,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1115,14 +1245,20 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set # CONFIG_IA64_GRANULE_16MB is not set CONFIG_IA64_GRANULE_64MB=y # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1149,6 +1285,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -1164,3 +1301,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index d452e18ac494..9bc8bcafc905 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6-tiger-smp -# Wed Aug 17 10:19:51 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:17:57 2005 # # @@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m -# CONFIG_ACPI_HOTPLUG_CPU is not set +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=m + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA) @@ -144,7 +155,6 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -188,13 +198,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -218,9 +233,11 @@ CONFIG_TCP_CONG_BIC=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -234,6 +251,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -247,7 +269,13 @@ CONFIG_FW_LOADER=m # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -266,7 +294,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -299,7 +326,8 @@ CONFIG_BLK_DEV_IDESCSI=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -339,6 +367,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -366,6 +395,7 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -454,12 +484,18 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -481,6 +517,7 @@ CONFIG_TULIP=m # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -512,6 +549,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -521,6 +559,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -618,6 +657,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set @@ -675,6 +715,7 @@ CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set @@ -691,7 +732,6 @@ CONFIG_MAX_RAW_DEVS=256 # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -702,12 +742,17 @@ CONFIG_MAX_RAW_DEVS=256 # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -800,9 +845,11 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -902,16 +949,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -919,6 +962,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -947,13 +991,11 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1003,6 +1045,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1072,10 +1115,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1089,6 +1134,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 80b0e9eb7fb3..0856ca67dd50 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Wed Aug 17 10:02:43 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:15:01 2005 # # @@ -18,6 +18,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -29,6 +30,7 @@ CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -103,6 +105,7 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -115,6 +118,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -122,20 +126,27 @@ CONFIG_BINFMT_MISC=y # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + # # Bus options (PCI, PCMCIA) # @@ -143,7 +154,6 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -187,8 +197,8 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y @@ -204,13 +214,17 @@ CONFIG_NETFILTER=y # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set CONFIG_IP_NF_ARPTABLES=y # CONFIG_IP_NF_ARPFILTER is not set # CONFIG_IP_NF_ARP_MANGLE is not set +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + # # SCTP Configuration (EXPERIMENTAL) # @@ -234,9 +248,11 @@ CONFIG_IP_NF_ARPTABLES=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -250,6 +266,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -263,7 +284,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -282,7 +309,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -315,7 +341,8 @@ CONFIG_BLK_DEV_IDECD=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set @@ -354,6 +381,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -381,6 +409,7 @@ CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -457,12 +486,18 @@ CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -485,6 +520,7 @@ CONFIG_TULIP_NAPI_HW_MITIGATION=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -516,6 +552,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -525,6 +562,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -650,12 +688,12 @@ CONFIG_AGP=y CONFIG_AGP_HP_ZX1=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set -# CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set @@ -689,7 +727,6 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -703,7 +740,6 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set # # Miscellaneous I2C Chip support @@ -730,11 +766,16 @@ CONFIG_I2C_ALGOPCF=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -806,6 +847,7 @@ CONFIG_FB_RADEON_DEBUG=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_S1D13XXX is not set @@ -862,11 +904,12 @@ CONFIG_SND_OPL3_LIB=y # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y # # PCI devices # -CONFIG_SND_AC97_CODEC=y # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -890,7 +933,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -952,9 +995,8 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -971,6 +1013,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -987,9 +1030,11 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1088,10 +1133,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1100,6 +1141,7 @@ CONFIG_FS_MBCACHE=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1126,13 +1168,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1177,6 +1217,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1246,10 +1287,12 @@ CONFIG_NLS_UTF8=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1263,6 +1306,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 5da208115ea1..6e3f147e03e5 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12 -# Tue Jun 21 11:30:42 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:13:03 2005 # # @@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -80,6 +82,10 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 CONFIG_NUMA=y CONFIG_VIRTUAL_MEM_MAP=y @@ -87,12 +93,21 @@ CONFIG_HOLES_IN_ZONE=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -105,6 +120,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -112,22 +128,29 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y +CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + # # Bus options (PCI, PCMCIA) # @@ -135,7 +158,6 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -147,12 +169,80 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SGI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -162,9 +252,14 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -178,7 +273,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -197,7 +298,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -230,7 +330,8 @@ CONFIG_BLK_DEV_IDESCSI=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -252,6 +353,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -270,6 +372,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -297,6 +400,7 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -314,6 +418,7 @@ CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_QSTOR is not set @@ -335,7 +440,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y @@ -344,6 +448,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -390,80 +495,25 @@ CONFIG_FUSION_MAX_SGE=128 # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -CONFIG_ARPD=y -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - +# Network device support # -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -485,6 +535,7 @@ CONFIG_TULIP=m # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -516,6 +567,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -525,6 +577,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -549,6 +602,10 @@ CONFIG_TIGON3=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem @@ -607,9 +664,7 @@ CONFIG_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461X is not set # # Character devices @@ -620,6 +675,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set @@ -641,7 +697,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -650,8 +705,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y -CONFIG_SERIAL_SGI_IOC4=y # CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_SGI_IOC4=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -684,6 +739,8 @@ CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set @@ -707,10 +764,21 @@ CONFIG_MMTIMER=y # # CONFIG_W1 is not set +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -753,6 +821,7 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -764,11 +833,12 @@ CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # # PCI devices # -CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -790,9 +860,10 @@ CONFIG_SND_EMU10K1=m # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -844,6 +915,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -853,9 +925,8 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -888,12 +959,17 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -918,7 +994,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set -CONFIG_USB_MON=m +CONFIG_USB_MON=y # # USB port drivers @@ -944,10 +1020,11 @@ CONFIG_USB_MON=m # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -964,6 +1041,8 @@ CONFIG_USB_MON=m # InfiniBand support # CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m @@ -981,6 +1060,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -996,22 +1076,20 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1040,14 +1118,11 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1071,15 +1146,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1094,6 +1172,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1163,10 +1242,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # HP Simulator drivers @@ -1187,6 +1268,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1194,6 +1276,7 @@ CONFIG_LOG_BUF_SHIFT=20 # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1215,7 +1298,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -- GitLab From 24ee0a6d7b0a52b140c880aae24c255de3b4a9a1 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 12 Sep 2005 12:15:43 -0500 Subject: [PATCH 0042/1519] [IA64] Cleanup use of various #defines related to nodes Some of the SN code & #defines related to compact nodes & IO discovery have gotten stale over the years. This patch attempts to clean them up. Some of the various SN MAX_xxx #defines were also unclear & misused. The primary changes are: - use MAX_NUMNODES. This is the generic linux #define for the number of nodes that are known to the generic kernel. Arrays & loops for constructs that are 1:1 with linux-defined nodes should use the linux #define - not an SN equivalent. - use MAX_COMPACT_NODES for MAX_NUMNODES + NUM_TIOS. This is the number of nodes in the SSI system. Compact nodes are a hack to get around the IA64 architectural limit of 256 nodes. Large SGI systems have more than 256 nodes. When we upgrade to ACPI3.0, I _hope_ that all nodes will be real nodes that are known to the generic kernel. That will allow us to delete the notion of "compact nodes". - add MAX_NUMALINK_NODES for the total number of nodes that are in the numalink domain - all partitions. - simplified (understandable) scan_for_ionodes() - small amount of cleanup related to cnodes Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/io_init.c | 4 +- arch/ia64/sn/kernel/setup.c | 160 +++++++++------------------- arch/ia64/sn/kernel/sn2/sn_hwperf.c | 4 +- arch/ia64/sn/kernel/tiocx.c | 5 +- arch/ia64/sn/kernel/xpc_partition.c | 2 +- drivers/char/snsc.c | 4 +- include/asm-ia64/sn/arch.h | 36 +++++-- include/asm-ia64/sn/io.h | 2 +- include/asm-ia64/sn/klconfig.h | 34 +----- include/asm-ia64/sn/sn_cpuid.h | 3 - include/asm-ia64/sn/sn_sal.h | 12 +-- include/asm-ia64/sn/xp.h | 2 +- 12 files changed, 92 insertions(+), 176 deletions(-) diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 906622d9f933..b4f5053f5e1b 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -22,8 +22,6 @@ #include "xtalk/hubdev.h" #include "xtalk/xwidgetdev.h" -nasid_t master_nasid = INVALID_NASID; /* Partition Master */ - static struct list_head sn_sysdata_list; /* sysdata list struct */ @@ -165,7 +163,7 @@ static void sn_fixup_ionodes(void) * Get SGI Specific HUB chipset information. * Inform Prom that this kernel can support domain bus numbering. */ - for (i = 0; i < numionodes; i++) { + for (i = 0; i < num_cnodes; i++) { hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo); nasid = cnodeid_to_nasid(i); hubdev->max_segment_number = 0xffffffff; diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 6f8c5883716b..0fb579ef18c2 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -59,8 +59,6 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu); #define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */ -lboard_t *root_lboard[MAX_COMPACT_NODES]; - extern void bte_init_node(nodepda_t *, cnodeid_t); extern void sn_timer_init(void); @@ -97,15 +95,15 @@ u8 sn_region_size; EXPORT_SYMBOL(sn_region_size); int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ -short physical_node_map[MAX_PHYSNODE_ID]; +short physical_node_map[MAX_NUMALINK_NODES]; static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS]; EXPORT_SYMBOL(physical_node_map); -int numionodes; +int num_cnodes; static void sn_init_pdas(char **); -static void scan_for_ionodes(void); +static void build_cnode_tables(void); static nodepda_t *nodepdaindr[MAX_COMPACT_NODES]; @@ -139,19 +137,6 @@ extern char drive_info[4 * 16]; char drive_info[4 * 16]; #endif -/* - * Get nasid of current cpu early in boot before nodepda is initialized - */ -static int -boot_get_nasid(void) -{ - int nasid; - - if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL)) - BUG(); - return nasid; -} - /* * This routine can only be used during init, since * smp_boot_data is an init data structure. @@ -223,7 +208,6 @@ void __init early_sn_setup(void) } extern int platform_intr_list[]; -extern nasid_t master_nasid; static int __initdata shub_1_1_found = 0; /* @@ -269,7 +253,6 @@ static void __init sn_check_for_wars(void) void __init sn_setup(char **cmdline_p) { long status, ticks_per_sec, drift; - int pxm; u32 version = sn_sal_rev(); extern void sn_cpu_init(void); @@ -300,11 +283,10 @@ void __init sn_setup(char **cmdline_p) MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY; - memset(physical_node_map, -1, sizeof(physical_node_map)); - for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++) - if (pxm_to_nid_map[pxm] != -1) - physical_node_map[pxm_to_nasid(pxm)] = - pxm_to_nid_map[pxm]; + /* + * Build the tables for managing cnodes. + */ + build_cnode_tables(); /* * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard @@ -319,8 +301,6 @@ void __init sn_setup(char **cmdline_p) printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); - master_nasid = boot_get_nasid(); - status = ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec, &drift); @@ -378,15 +358,6 @@ static void __init sn_init_pdas(char **cmdline_p) { cnodeid_t cnode; - memset(sn_cnodeid_to_nasid, -1, - sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); - for_each_online_node(cnode) - sn_cnodeid_to_nasid[cnode] = - pxm_to_nasid(nid_to_pxm_map[cnode]); - - numionodes = num_online_nodes(); - scan_for_ionodes(); - /* * Allocate & initalize the nodepda for each node. */ @@ -402,7 +373,7 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Allocate & initialize nodepda for TIOs. For now, put them on node 0. */ - for (cnode = num_online_nodes(); cnode < numionodes; cnode++) { + for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) { nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t)); memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); @@ -411,7 +382,7 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Now copy the array of nodepda pointers to each nodepda. */ - for (cnode = 0; cnode < numionodes; cnode++) + for (cnode = 0; cnode < num_cnodes; cnode++) memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr, sizeof(nodepdaindr)); @@ -428,7 +399,7 @@ static void __init sn_init_pdas(char **cmdline_p) * Initialize the per node hubdev. This includes IO Nodes and * headless/memless nodes. */ - for (cnode = 0; cnode < numionodes; cnode++) { + for (cnode = 0; cnode < num_cnodes; cnode++) { hubdev_init_node(nodepdaindr[cnode], cnode); } } @@ -553,87 +524,58 @@ void __init sn_cpu_init(void) } /* - * Scan klconfig for ionodes. Add the nasids to the - * physical_node_map and the pda and increment numionodes. + * Build tables for converting between NASIDs and cnodes. */ +static inline int __init board_needs_cnode(int type) +{ + return (type == KLTYPE_SNIA || type == KLTYPE_TIO); +} -static void __init scan_for_ionodes(void) +void __init build_cnode_tables(void) { - int nasid = 0; + int nasid; + int node; lboard_t *brd; - /* fakeprom does not support klgraph */ - if (IS_RUNNING_ON_FAKE_PROM()) - return; - - /* Setup ionodes with memory */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - char *klgraph_header; - cnodeid_t cnodeid; - - if (physical_node_map[nasid] == -1) - continue; + memset(physical_node_map, -1, sizeof(physical_node_map)); + memset(sn_cnodeid_to_nasid, -1, + sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); - cnodeid = -1; - klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid)); - if (!klgraph_header) { - BUG(); /* All nodes must have klconfig tables! */ - } - cnodeid = nasid_to_cnodeid(nasid); - root_lboard[cnodeid] = (lboard_t *) - NODE_OFFSET_TO_LBOARD((nasid), - ((kl_config_hdr_t - *) (klgraph_header))-> - ch_board_info); + /* + * First populate the tables with C/M bricks. This ensures that + * cnode == node for all C & M bricks. + */ + for_each_online_node(node) { + nasid = pxm_to_nasid(nid_to_pxm_map[node]); + sn_cnodeid_to_nasid[node] = nasid; + physical_node_map[nasid] = node; } - /* Scan headless/memless IO Nodes. */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - /* if there's no nasid, don't try to read the klconfig on the node */ - if (physical_node_map[nasid] == -1) - continue; - brd = find_lboard_any((lboard_t *) - root_lboard[nasid_to_cnodeid(nasid)], - KLTYPE_SNIA); - if (brd) { - brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */ - if (!brd) - continue; - } - - brd = find_lboard_any(brd, KLTYPE_SNIA); + /* + * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node + * limit on the number of nodes, we can't use the generic node numbers + * for this. Note that num_cnodes is incremented below as TIOs or + * headless/memoryless nodes are discovered. + */ + num_cnodes = num_online_nodes(); - while (brd) { - sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; - physical_node_map[brd->brd_nasid] = numionodes; - root_lboard[numionodes] = brd; - numionodes++; - brd = KLCF_NEXT_ANY(brd); - if (!brd) - break; - - brd = find_lboard_any(brd, KLTYPE_SNIA); - } - } + /* fakeprom does not support klgraph */ + if (IS_RUNNING_ON_FAKE_PROM()) + return; - /* Scan for TIO nodes. */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - /* if there's no nasid, don't try to read the klconfig on the node */ - if (physical_node_map[nasid] == -1) - continue; - brd = find_lboard_any((lboard_t *) - root_lboard[nasid_to_cnodeid(nasid)], - KLTYPE_TIO); + /* Find TIOs & headless/memoryless nodes and add them to the tables */ + for_each_online_node(node) { + kl_config_hdr_t *klgraph_header; + nasid = cnodeid_to_nasid(node); + if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL) + BUG(); + brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info); while (brd) { - sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; - physical_node_map[brd->brd_nasid] = numionodes; - root_lboard[numionodes] = brd; - numionodes++; - brd = KLCF_NEXT_ANY(brd); - if (!brd) - break; - - brd = find_lboard_any(brd, KLTYPE_TIO); + if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) { + sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid; + physical_node_map[brd->brd_nasid] = num_cnodes++; + } + brd = find_lboard_next(brd); } } } diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 0513aacac8c1..6c6fbca3229c 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -476,8 +476,8 @@ static int sn_topology_show(struct seq_file *s, void *d) for_each_online_cpu(j) { seq_printf(s, j ? ":%d" : ", dist %d", node_distance( - cpuid_to_cnodeid(i), - cpuid_to_cnodeid(j))); + cpu_to_node(i), + cpu_to_node(j))); } seq_putc(s, '\n'); } diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index b45db5133f55..7e9764a69dc8 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -486,11 +486,10 @@ static int __init tiocx_init(void) bus_register(&tiocx_bus_type); - for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) { + for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) { nasid_t nasid; - if ((nasid = cnodeid_to_nasid(cnodeid)) < 0) - break; /* No more nasids .. bail out of loop */ + nasid = cnodeid_to_nasid(cnodeid); if ((nasid & 0x1) && is_fpga_brick(nasid)) { struct hubdev_info *hubdev; diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 578265ea9e67..72ef330fb784 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -44,7 +44,7 @@ static u64 xpc_sh2_IPI_access3; /* original protection values for each node */ -u64 xpc_prot_vec[MAX_COMPACT_NODES]; +u64 xpc_prot_vec[MAX_NUMNODES]; /* this partition's reserved page */ diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c index 261a41bf6d02..a025a89ea70a 100644 --- a/drivers/char/snsc.c +++ b/drivers/char/snsc.c @@ -377,7 +377,7 @@ scdrv_init(void) dev_t first_dev, dev; nasid_t event_nasid = ia64_sn_get_console_nasid(); - if (alloc_chrdev_region(&first_dev, 0, numionodes, + if (alloc_chrdev_region(&first_dev, 0, num_cnodes, SYSCTL_BASENAME) < 0) { printk("%s: failed to register SN system controller device\n", __FUNCTION__); @@ -385,7 +385,7 @@ scdrv_init(void) } snsc_class = class_create(THIS_MODULE, SYSCTL_BASENAME); - for (cnode = 0; cnode < numionodes; cnode++) { + for (cnode = 0; cnode < num_cnodes; cnode++) { geoid = cnodeid_get_geoid(cnode); devnamep = devname; format_module_id(devnamep, geo_module(geoid), diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h index ab827d298569..8fce5a6db951 100644 --- a/include/asm-ia64/sn/arch.h +++ b/include/asm-ia64/sn/arch.h @@ -17,6 +17,32 @@ #include #include +/* + * This is the maximum number of NUMALINK nodes that can be part of a single + * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in + * remote partitions are NOT included in this number. + * The number of compact nodes cannot exceed size of a coherency domain. + * The purpose of this define is to specify a node count that includes + * all C/M/TIO nodes in an SSI system. + * + * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes. + * + * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade + * to ACPI3.0, this limit will be removed. The notion of "compact nodes" + * should be deleted and TIOs should be included in MAX_NUMNODES. + */ +#define MAX_COMPACT_NODES 512 + +/* + * Maximum number of nodes in all partitions and in all coherency domains. + * This is the total number of nodes accessible in the numalink fabric. It + * includes all C & M bricks, plus all TIOs. + * + * This value is also the value of the maximum number of NASIDs in the numalink + * fabric. + */ +#define MAX_NUMALINK_NODES 2048 + /* * The following defines attributes of the HUB chip. These attributes are * frequently referenced. They are kept in the per-cpu data areas of each cpu. @@ -40,15 +66,6 @@ DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); #define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found) -/* - * This is the maximum number of nodes that can be part of a kernel. - * Effectively, it's the maximum number of compact node ids (cnodeid_t). - * This is not necessarily the same as MAX_NASIDS. - */ -#define MAX_COMPACT_NODES 2048 -#define CPUS_PER_NODE 4 - - /* * Compact node ID to nasid mappings kept in the per-cpu data areas of each * cpu. @@ -57,7 +74,6 @@ DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]); #define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) - extern u8 sn_partition_id; extern u8 sn_system_size; extern u8 sn_sharing_domain_size; diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h index 42209733f6b1..ac30c747c5ab 100644 --- a/include/asm-ia64/sn/io.h +++ b/include/asm-ia64/sn/io.h @@ -14,7 +14,7 @@ extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */ extern void __sn_mmiowb(void); /* Forward definition */ -extern int numionodes; +extern int num_cnodes; #define __sn_mf_a() ia64_mfa() diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h index 9f920c70a62a..bcbf209d63be 100644 --- a/include/asm-ia64/sn/klconfig.h +++ b/include/asm-ia64/sn/klconfig.h @@ -208,19 +208,6 @@ typedef struct lboard_s { klconf_off_t brd_next_same; /* Next BOARD with same nasid */ } lboard_t; -#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) -#define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off)) -#define KLCF_NEXT(_brd) \ - ((_brd)->brd_next_same ? \ - (NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL) -#define KLCF_NEXT_ANY(_brd) \ - ((_brd)->brd_next_any ? \ - (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL) -#define KLCF_COMP(_brd, _ndx) \ - ((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \ - (NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)]))) - - /* * Generic info structure. This stores common info about a * component. @@ -249,24 +236,11 @@ typedef struct klinfo_s { /* Generic info */ } klinfo_t ; -static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type) +static inline lboard_t *find_lboard_next(lboard_t * brd) { - /* Search all boards stored on this node. */ - - while (start) { - if (start->brd_type == brd_type) - return start; - start = KLCF_NEXT_ANY(start); - } - /* Didn't find it. */ - return (lboard_t *) NULL; + if (brd && brd->brd_next_any) + return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any); + return NULL; } - -/* external declarations of Linux kernel functions. */ - -extern lboard_t *root_lboard[]; -extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type); -extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type); - #endif /* _ASM_IA64_SN_KLCONFIG_H */ diff --git a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h index d2c1d34dcce4..749deb2ca6c1 100644 --- a/include/asm-ia64/sn/sn_cpuid.h +++ b/include/asm-ia64/sn/sn_cpuid.h @@ -105,7 +105,6 @@ extern short physical_node_map[]; /* indexed by nasid to get cnode */ #define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid) #define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode) #define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice) -#define cpuid_to_cnodeid(cpuid) (physical_node_map[cpuid_to_nasid(cpuid)]) /* @@ -113,8 +112,6 @@ extern short physical_node_map[]; /* indexed by nasid to get cnode */ * of potentially large tables. */ extern int nasid_slice_to_cpuid(int, int); -#define nasid_slice_to_cpu_physical_id(nasid, slice) \ - cpu_physical_id(nasid_slice_to_cpuid(nasid, slice)) /* * cnodeid_to_nasid - convert a cnodeid to a NASID diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index fea35b33d4e4..5ad855db8464 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -198,26 +198,16 @@ ia64_sn_get_master_baseio_nasid(void) return ret_stuff.v0; } -static inline char * +static inline void * ia64_sn_get_klconfig_addr(nasid_t nasid) { struct ia64_sal_retval ret_stuff; - int cnodeid; - cnodeid = nasid_to_cnodeid(nasid); ret_stuff.status = 0; ret_stuff.v0 = 0; ret_stuff.v1 = 0; ret_stuff.v2 = 0; SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0); - - /* - * We should panic if a valid cnode nasid does not produce - * a klconfig address. - */ - if (ret_stuff.status != 0) { - panic("ia64_sn_get_klconfig_addr: Returned error %lx\n", ret_stuff.status); - } return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL; } diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h index 1df1c9f61a65..75a2f39c6ac6 100644 --- a/include/asm-ia64/sn/xp.h +++ b/include/asm-ia64/sn/xp.h @@ -49,7 +49,7 @@ * C-brick nasids, thus the need for bitmaps which don't account for * odd-numbered (non C-brick) nasids. */ -#define XP_MAX_PHYSNODE_ID (MAX_PHYSNODE_ID / 2) +#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2) #define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8) #define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64) -- GitLab From 55642d36cd0f626c614f6dfa1151a5af1ff84f36 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 15 Sep 2005 17:00:10 -0700 Subject: [PATCH 0043/1519] [IA64] Two more uses of cpuid_to_cnodeid() must go. s/cpuid_to_cnodeid/cpu_to_node/ Signed-off-by: Tony Luck --- drivers/char/mmtimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c index 12006182f575..78c89a3e7825 100644 --- a/drivers/char/mmtimer.c +++ b/drivers/char/mmtimer.c @@ -441,7 +441,7 @@ static irqreturn_t mmtimer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { int i; - mmtimer_t *base = timers + cpuid_to_cnodeid(smp_processor_id()) * + mmtimer_t *base = timers + cpu_to_node(smp_processor_id()) * NUM_COMPARATORS; unsigned long expires = 0; int result = IRQ_NONE; @@ -608,7 +608,7 @@ static int sgi_timer_set(struct k_itimer *timr, int flags, */ preempt_disable(); - nodeid = cpuid_to_cnodeid(smp_processor_id()); + nodeid = cpu_to_node(smp_processor_id()); base = timers + nodeid * NUM_COMPARATORS; retry: /* Don't use an allocated timer, or a deleted one that's pending */ -- GitLab From eabf04151682bc7b57c84fea58cf9e4e5a3cf2a9 Mon Sep 17 00:00:00 2001 From: Hubert WS Lin Date: Wed, 14 Sep 2005 11:39:25 -0700 Subject: [PATCH 0044/1519] [PATCH] pcnet32: set_ringparam implementation This patch implements the set_ringparam(), one of the ethtool operations, which allows changing tx/rx ring sizes via ethtool. - Changed memery allocation of tx/rx ring from static to dynamic - Implemented set_ringparam() - Tested on i386 and ppc64 Signed-off-by: Hubert WS Lin Signed-off-by: Jay Vosburgh Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 263 +++++++++++++++++++++++++++++++++--------- 1 file changed, 209 insertions(+), 54 deletions(-) diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 6c3731b608da..7350c27ea2dc 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.30j" -#define DRV_RELDATE "29.04.2005" +#define DRV_VERSION "1.31" +#define DRV_RELDATE "02.Sep.2005" #define PFX DRV_NAME ": " static const char *version = @@ -257,6 +257,7 @@ static int homepna[MAX_UNITS]; * v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32. * v1.30i 28 Jun 2004 Don Fry change to use module_param. * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test. + * v1.31 02 Sep 2005 Hubert WS Lin added set_ringparam(). */ @@ -266,17 +267,17 @@ static int homepna[MAX_UNITS]; * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4). */ #ifndef PCNET32_LOG_TX_BUFFERS -#define PCNET32_LOG_TX_BUFFERS 4 -#define PCNET32_LOG_RX_BUFFERS 5 +#define PCNET32_LOG_TX_BUFFERS 4 +#define PCNET32_LOG_RX_BUFFERS 5 +#define PCNET32_LOG_MAX_TX_BUFFERS 9 /* 2^9 == 512 */ +#define PCNET32_LOG_MAX_RX_BUFFERS 9 #endif #define TX_RING_SIZE (1 << (PCNET32_LOG_TX_BUFFERS)) -#define TX_RING_MOD_MASK (TX_RING_SIZE - 1) -#define TX_RING_LEN_BITS ((PCNET32_LOG_TX_BUFFERS) << 12) +#define TX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_TX_BUFFERS)) #define RX_RING_SIZE (1 << (PCNET32_LOG_RX_BUFFERS)) -#define RX_RING_MOD_MASK (RX_RING_SIZE - 1) -#define RX_RING_LEN_BITS ((PCNET32_LOG_RX_BUFFERS) << 4) +#define RX_MAX_RING_SIZE (1 << (PCNET32_LOG_MAX_RX_BUFFERS)) #define PKT_BUF_SZ 1544 @@ -339,8 +340,8 @@ struct pcnet32_access { */ struct pcnet32_private { /* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */ - struct pcnet32_rx_head rx_ring[RX_RING_SIZE]; - struct pcnet32_tx_head tx_ring[TX_RING_SIZE]; + struct pcnet32_rx_head *rx_ring; + struct pcnet32_tx_head *tx_ring; struct pcnet32_init_block init_block; dma_addr_t dma_addr; /* DMA address of beginning of this object, returned by @@ -349,13 +350,21 @@ struct pcnet32_private { structure */ const char *name; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - struct sk_buff *rx_skbuff[RX_RING_SIZE]; - dma_addr_t tx_dma_addr[TX_RING_SIZE]; - dma_addr_t rx_dma_addr[RX_RING_SIZE]; + struct sk_buff **tx_skbuff; + struct sk_buff **rx_skbuff; + dma_addr_t *tx_dma_addr; + dma_addr_t *rx_dma_addr; struct pcnet32_access a; spinlock_t lock; /* Guard lock */ unsigned int cur_rx, cur_tx; /* The next free ring entry */ + unsigned int rx_ring_size; /* current rx ring size */ + unsigned int tx_ring_size; /* current tx ring size */ + unsigned int rx_mod_mask; /* rx ring modular mask */ + unsigned int tx_mod_mask; /* tx ring modular mask */ + unsigned short rx_len_bits; + unsigned short tx_len_bits; + dma_addr_t rx_ring_dma_addr; + dma_addr_t tx_ring_dma_addr; unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ struct net_device_stats stats; char tx_full; @@ -397,6 +406,9 @@ static int pcnet32_get_regs_len(struct net_device *dev); static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *ptr); static void pcnet32_purge_tx_ring(struct net_device *dev); +static int pcnet32_alloc_ring(struct net_device *dev); +static void pcnet32_free_ring(struct net_device *dev); + enum pci_flags_bit { PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, @@ -613,10 +625,59 @@ static void pcnet32_get_ringparam(struct net_device *dev, struct ethtool_ringpar { struct pcnet32_private *lp = dev->priv; - ering->tx_max_pending = TX_RING_SIZE - 1; - ering->tx_pending = lp->cur_tx - lp->dirty_tx; - ering->rx_max_pending = RX_RING_SIZE - 1; - ering->rx_pending = lp->cur_rx & RX_RING_MOD_MASK; + ering->tx_max_pending = TX_MAX_RING_SIZE - 1; + ering->tx_pending = lp->tx_ring_size - 1; + ering->rx_max_pending = RX_MAX_RING_SIZE - 1; + ering->rx_pending = lp->rx_ring_size - 1; +} + +static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + struct pcnet32_private *lp = dev->priv; + unsigned long flags; + int i; + + if (ering->rx_mini_pending || ering->rx_jumbo_pending) + return -EINVAL; + + if (netif_running(dev)) + pcnet32_close(dev); + + spin_lock_irqsave(&lp->lock, flags); + pcnet32_free_ring(dev); + lp->tx_ring_size = min(ering->tx_pending, (unsigned int) TX_MAX_RING_SIZE); + lp->rx_ring_size = min(ering->rx_pending, (unsigned int) RX_MAX_RING_SIZE); + + for (i = 0; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { + if (lp->tx_ring_size <= (1 << i)) + break; + } + lp->tx_ring_size = (1 << i); + lp->tx_mod_mask = lp->tx_ring_size - 1; + lp->tx_len_bits = (i << 12); + + for (i = 0; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { + if (lp->rx_ring_size <= (1 << i)) + break; + } + lp->rx_ring_size = (1 << i); + lp->rx_mod_mask = lp->rx_ring_size - 1; + lp->rx_len_bits = (i << 4); + + if (pcnet32_alloc_ring(dev)) { + pcnet32_free_ring(dev); + return -ENOMEM; + } + + spin_unlock_irqrestore(&lp->lock, flags); + + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_INFO PFX "Ring Param Settings: RX: %d, TX: %d\n", lp->rx_ring_size, lp->tx_ring_size); + + if (netif_running(dev)) + pcnet32_open(dev); + + return 0; } static void pcnet32_get_strings(struct net_device *dev, u32 stringset, u8 *data) @@ -948,6 +1009,7 @@ static struct ethtool_ops pcnet32_ethtool_ops = { .nway_reset = pcnet32_nway_reset, .get_link = pcnet32_get_link, .get_ringparam = pcnet32_get_ringparam, + .set_ringparam = pcnet32_set_ringparam, .get_tx_csum = ethtool_op_get_tx_csum, .get_sg = ethtool_op_get_sg, .get_tso = ethtool_op_get_tso, @@ -1241,6 +1303,12 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) dev->priv = lp; lp->name = chipname; lp->shared_irq = shared; + lp->tx_ring_size = TX_RING_SIZE; /* default tx ring size */ + lp->rx_ring_size = RX_RING_SIZE; /* default rx ring size */ + lp->tx_mod_mask = lp->tx_ring_size - 1; + lp->rx_mod_mask = lp->rx_ring_size - 1; + lp->tx_len_bits = (PCNET32_LOG_TX_BUFFERS << 12); + lp->rx_len_bits = (PCNET32_LOG_RX_BUFFERS << 4); lp->mii_if.full_duplex = fdx; lp->mii_if.phy_id_mask = 0x1f; lp->mii_if.reg_num_mask = 0x1f; @@ -1267,21 +1335,23 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) } lp->a = *a; + if (pcnet32_alloc_ring(dev)) { + ret = -ENOMEM; + goto err_free_ring; + } /* detect special T1/E1 WAN card by checking for MAC address */ if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0 && dev->dev_addr[2] == 0x75) lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI; lp->init_block.mode = le16_to_cpu(0x0003); /* Disable Rx and Tx. */ - lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS); + lp->init_block.tlen_rlen = le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits); for (i = 0; i < 6; i++) lp->init_block.phys_addr[i] = dev->dev_addr[i]; lp->init_block.filter[0] = 0x00000000; lp->init_block.filter[1] = 0x00000000; - lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr + - offsetof(struct pcnet32_private, rx_ring)); - lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr + - offsetof(struct pcnet32_private, tx_ring)); + lp->init_block.rx_ring = (u32)le32_to_cpu(lp->rx_ring_dma_addr); + lp->init_block.tx_ring = (u32)le32_to_cpu(lp->tx_ring_dma_addr); /* switch pcnet32 to 32bit mode */ a->write_bcr(ioaddr, 20, 2); @@ -1312,7 +1382,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) if (pcnet32_debug & NETIF_MSG_PROBE) printk(", failed to detect IRQ line.\n"); ret = -ENODEV; - goto err_free_consistent; + goto err_free_ring; } if (pcnet32_debug & NETIF_MSG_PROBE) printk(", probed IRQ %d.\n", dev->irq); @@ -1343,7 +1413,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) /* Fill in the generic fields of the device structure. */ if (register_netdev(dev)) - goto err_free_consistent; + goto err_free_ring; if (pdev) { pci_set_drvdata(pdev, dev); @@ -1361,6 +1431,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) return 0; +err_free_ring: + pcnet32_free_ring(dev); err_free_consistent: pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); err_free_netdev: @@ -1371,6 +1443,86 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) } +static int pcnet32_alloc_ring(struct net_device *dev) +{ + struct pcnet32_private *lp = dev->priv; + + if ((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, + &lp->tx_ring_dma_addr)) == NULL) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Consistent memory allocation failed.\n"); + return -ENOMEM; + } + + if ((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size, + &lp->rx_ring_dma_addr)) == NULL) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Consistent memory allocation failed.\n"); + return -ENOMEM; + } + + if (!(lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, GFP_ATOMIC))) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Memory allocation failed.\n"); + return -ENOMEM; + } + memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size); + + if (!(lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, GFP_ATOMIC))) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Memory allocation failed.\n"); + return -ENOMEM; + } + memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size); + + if (!(lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, GFP_ATOMIC))) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Memory allocation failed.\n"); + return -ENOMEM; + } + memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size); + + if (!(lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, GFP_ATOMIC))) { + if (pcnet32_debug & NETIF_MSG_DRV) + printk(KERN_ERR PFX "Memory allocation failed.\n"); + return -ENOMEM; + } + memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size); + + return 0; +} + + +static void pcnet32_free_ring(struct net_device *dev) +{ + struct pcnet32_private *lp = dev->priv; + + kfree(lp->tx_skbuff); + lp->tx_skbuff = NULL; + + kfree(lp->rx_skbuff); + lp->rx_skbuff = NULL; + + kfree(lp->tx_dma_addr); + lp->tx_dma_addr = NULL; + + kfree(lp->rx_dma_addr); + lp->rx_dma_addr = NULL; + + if (lp->tx_ring) { + pci_free_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size, + lp->tx_ring, lp->tx_ring_dma_addr); + lp->tx_ring = NULL; + } + + if (lp->rx_ring) { + pci_free_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size, + lp->rx_ring, lp->rx_ring_dma_addr); + lp->rx_ring = NULL; + } +} + + static int pcnet32_open(struct net_device *dev) { @@ -1402,8 +1554,8 @@ pcnet32_open(struct net_device *dev) if (netif_msg_ifup(lp)) printk(KERN_DEBUG "%s: pcnet32_open() irq %d tx/rx rings %#x/%#x init %#x.\n", dev->name, dev->irq, - (u32) (lp->dma_addr + offsetof(struct pcnet32_private, tx_ring)), - (u32) (lp->dma_addr + offsetof(struct pcnet32_private, rx_ring)), + (u32) (lp->tx_ring_dma_addr), + (u32) (lp->rx_ring_dma_addr), (u32) (lp->dma_addr + offsetof(struct pcnet32_private, init_block))); /* set/reset autoselect bit */ @@ -1523,7 +1675,7 @@ pcnet32_open(struct net_device *dev) err_free_ring: /* free any allocated skbuffs */ - for (i = 0; i < RX_RING_SIZE; i++) { + for (i = 0; i < lp->rx_ring_size; i++) { lp->rx_ring[i].status = 0; if (lp->rx_skbuff[i]) { pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2, @@ -1533,6 +1685,9 @@ pcnet32_open(struct net_device *dev) lp->rx_skbuff[i] = NULL; lp->rx_dma_addr[i] = 0; } + + pcnet32_free_ring(dev); + /* * Switch back to 16bit mode to avoid problems with dumb * DOS packet driver after a warm reboot @@ -1564,7 +1719,7 @@ pcnet32_purge_tx_ring(struct net_device *dev) struct pcnet32_private *lp = dev->priv; int i; - for (i = 0; i < TX_RING_SIZE; i++) { + for (i = 0; i < lp->tx_ring_size; i++) { lp->tx_ring[i].status = 0; /* CPU owns buffer */ wmb(); /* Make sure adapter sees owner change */ if (lp->tx_skbuff[i]) { @@ -1589,7 +1744,7 @@ pcnet32_init_ring(struct net_device *dev) lp->cur_rx = lp->cur_tx = 0; lp->dirty_rx = lp->dirty_tx = 0; - for (i = 0; i < RX_RING_SIZE; i++) { + for (i = 0; i < lp->rx_ring_size; i++) { struct sk_buff *rx_skbuff = lp->rx_skbuff[i]; if (rx_skbuff == NULL) { if (!(rx_skbuff = lp->rx_skbuff[i] = dev_alloc_skb (PKT_BUF_SZ))) { @@ -1613,20 +1768,18 @@ pcnet32_init_ring(struct net_device *dev) } /* The Tx buffer address is filled in as needed, but we do need to clear * the upper ownership bit. */ - for (i = 0; i < TX_RING_SIZE; i++) { + for (i = 0; i < lp->tx_ring_size; i++) { lp->tx_ring[i].status = 0; /* CPU owns buffer */ wmb(); /* Make sure adapter sees owner change */ lp->tx_ring[i].base = 0; lp->tx_dma_addr[i] = 0; } - lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS); + lp->init_block.tlen_rlen = le16_to_cpu(lp->tx_len_bits | lp->rx_len_bits); for (i = 0; i < 6; i++) lp->init_block.phys_addr[i] = dev->dev_addr[i]; - lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr + - offsetof(struct pcnet32_private, rx_ring)); - lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr + - offsetof(struct pcnet32_private, tx_ring)); + lp->init_block.rx_ring = (u32)le32_to_cpu(lp->rx_ring_dma_addr); + lp->init_block.tx_ring = (u32)le32_to_cpu(lp->tx_ring_dma_addr); wmb(); /* Make sure all changes are visible */ return 0; } @@ -1684,13 +1837,13 @@ pcnet32_tx_timeout (struct net_device *dev) printk(KERN_DEBUG " Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.", lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "", lp->cur_rx); - for (i = 0 ; i < RX_RING_SIZE; i++) + for (i = 0 ; i < lp->rx_ring_size; i++) printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", le32_to_cpu(lp->rx_ring[i].base), (-le16_to_cpu(lp->rx_ring[i].buf_length)) & 0xffff, le32_to_cpu(lp->rx_ring[i].msg_length), le16_to_cpu(lp->rx_ring[i].status)); - for (i = 0 ; i < TX_RING_SIZE; i++) + for (i = 0 ; i < lp->tx_ring_size; i++) printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ", le32_to_cpu(lp->tx_ring[i].base), (-le16_to_cpu(lp->tx_ring[i].length)) & 0xffff, @@ -1731,7 +1884,7 @@ pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Fill in a Tx ring entry */ /* Mask to ring buffer boundary. */ - entry = lp->cur_tx & TX_RING_MOD_MASK; + entry = lp->cur_tx & lp->tx_mod_mask; /* Caution: the write order is important here, set the status * with the "ownership" bits last. */ @@ -1755,7 +1908,7 @@ pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; - if (lp->tx_ring[(entry+1) & TX_RING_MOD_MASK].base != 0) { + if (lp->tx_ring[(entry+1) & lp->tx_mod_mask].base != 0) { lp->tx_full = 1; netif_stop_queue(dev); } @@ -1808,7 +1961,7 @@ pcnet32_interrupt(int irq, void *dev_id, struct pt_regs * regs) int delta; while (dirty_tx != lp->cur_tx) { - int entry = dirty_tx & TX_RING_MOD_MASK; + int entry = dirty_tx & lp->tx_mod_mask; int status = (short)le16_to_cpu(lp->tx_ring[entry].status); if (status < 0) @@ -1866,18 +2019,18 @@ pcnet32_interrupt(int irq, void *dev_id, struct pt_regs * regs) dirty_tx++; } - delta = (lp->cur_tx - dirty_tx) & (TX_RING_MOD_MASK + TX_RING_SIZE); - if (delta > TX_RING_SIZE) { + delta = (lp->cur_tx - dirty_tx) & (lp->tx_mod_mask + lp->tx_ring_size); + if (delta > lp->tx_ring_size) { if (netif_msg_drv(lp)) printk(KERN_ERR "%s: out-of-sync dirty pointer, %d vs. %d, full=%d.\n", dev->name, dirty_tx, lp->cur_tx, lp->tx_full); - dirty_tx += TX_RING_SIZE; - delta -= TX_RING_SIZE; + dirty_tx += lp->tx_ring_size; + delta -= lp->tx_ring_size; } if (lp->tx_full && netif_queue_stopped(dev) && - delta < TX_RING_SIZE - 2) { + delta < lp->tx_ring_size - 2) { /* The ring is no longer full, clear tbusy. */ lp->tx_full = 0; netif_wake_queue (dev); @@ -1934,8 +2087,8 @@ static int pcnet32_rx(struct net_device *dev) { struct pcnet32_private *lp = dev->priv; - int entry = lp->cur_rx & RX_RING_MOD_MASK; - int boguscnt = RX_RING_SIZE / 2; + int entry = lp->cur_rx & lp->rx_mod_mask; + int boguscnt = lp->rx_ring_size / 2; /* If we own the next entry, it's a new packet. Send it up. */ while ((short)le16_to_cpu(lp->rx_ring[entry].status) >= 0) { @@ -2000,12 +2153,12 @@ pcnet32_rx(struct net_device *dev) if (netif_msg_drv(lp)) printk(KERN_ERR "%s: Memory squeeze, deferring packet.\n", dev->name); - for (i = 0; i < RX_RING_SIZE; i++) + for (i = 0; i < lp->rx_ring_size; i++) if ((short)le16_to_cpu(lp->rx_ring[(entry+i) - & RX_RING_MOD_MASK].status) < 0) + & lp->rx_mod_mask].status) < 0) break; - if (i > RX_RING_SIZE -2) { + if (i > lp->rx_ring_size -2) { lp->stats.rx_dropped++; lp->rx_ring[entry].status |= le16_to_cpu(0x8000); wmb(); /* Make sure adapter sees owner change */ @@ -2043,7 +2196,7 @@ pcnet32_rx(struct net_device *dev) lp->rx_ring[entry].buf_length = le16_to_cpu(2-PKT_BUF_SZ); wmb(); /* Make sure owner changes after all others are visible */ lp->rx_ring[entry].status |= le16_to_cpu(0x8000); - entry = (++lp->cur_rx) & RX_RING_MOD_MASK; + entry = (++lp->cur_rx) & lp->rx_mod_mask; if (--boguscnt <= 0) break; /* don't stay in loop forever */ } @@ -2086,7 +2239,7 @@ pcnet32_close(struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); /* free all allocated skbuffs */ - for (i = 0; i < RX_RING_SIZE; i++) { + for (i = 0; i < lp->rx_ring_size; i++) { lp->rx_ring[i].status = 0; wmb(); /* Make sure adapter sees owner change */ if (lp->rx_skbuff[i]) { @@ -2098,7 +2251,7 @@ pcnet32_close(struct net_device *dev) lp->rx_dma_addr[i] = 0; } - for (i = 0; i < TX_RING_SIZE; i++) { + for (i = 0; i < lp->tx_ring_size; i++) { lp->tx_ring[i].status = 0; /* CPU owns buffer */ wmb(); /* Make sure adapter sees owner change */ if (lp->tx_skbuff[i]) { @@ -2267,6 +2420,7 @@ static void __devexit pcnet32_remove_one(struct pci_dev *pdev) struct pcnet32_private *lp = dev->priv; unregister_netdev(dev); + pcnet32_free_ring(dev); release_region(dev->base_addr, PCNET32_TOTAL_SIZE); pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); free_netdev(dev); @@ -2342,6 +2496,7 @@ static void __exit pcnet32_cleanup_module(void) struct pcnet32_private *lp = pcnet32_dev->priv; next_dev = lp->next; unregister_netdev(pcnet32_dev); + pcnet32_free_ring(pcnet32_dev); release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE); pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr); free_netdev(pcnet32_dev); -- GitLab From 76209926e3756f66c9cdc8a4becbf34df8c47799 Mon Sep 17 00:00:00 2001 From: Hubert WS Lin Date: Wed, 14 Sep 2005 11:39:27 -0700 Subject: [PATCH 0045/1519] [PATCH] pcnet32: set min ring size to 4 Don Fry reminded me that the pcnet32_loopback_test() asssumes the ring size is no less than 4. The minimum ring size was changed to 4 in pcnet32_set_ringparam() to allow the loopback test to work unchanged. - Set minimum ring size to 4 to allow loopback test to work unchanged - Moved variable init_block to first field in struct pcnet32_private Signed-off-by: Hubert WS Lin Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/pcnet32.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 7350c27ea2dc..70fe81a89df9 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.31" -#define DRV_RELDATE "02.Sep.2005" +#define DRV_VERSION "1.31a" +#define DRV_RELDATE "12.Sep.2005" #define PFX DRV_NAME ": " static const char *version = @@ -258,6 +258,8 @@ static int homepna[MAX_UNITS]; * v1.30i 28 Jun 2004 Don Fry change to use module_param. * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test. * v1.31 02 Sep 2005 Hubert WS Lin added set_ringparam(). + * v1.31a 12 Sep 2005 Hubert WS Lin set min ring size to 4 + * to allow loopback test to work unchanged. */ @@ -335,14 +337,14 @@ struct pcnet32_access { }; /* - * The first three fields of pcnet32_private are read by the ethernet device - * so we allocate the structure should be allocated by pci_alloc_consistent(). + * The first field of pcnet32_private is read by the ethernet device + * so the structure should be allocated using pci_alloc_consistent(). */ struct pcnet32_private { + struct pcnet32_init_block init_block; /* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */ struct pcnet32_rx_head *rx_ring; struct pcnet32_tx_head *tx_ring; - struct pcnet32_init_block init_block; dma_addr_t dma_addr; /* DMA address of beginning of this object, returned by pci_alloc_consistent */ @@ -648,7 +650,10 @@ static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringpara lp->tx_ring_size = min(ering->tx_pending, (unsigned int) TX_MAX_RING_SIZE); lp->rx_ring_size = min(ering->rx_pending, (unsigned int) RX_MAX_RING_SIZE); - for (i = 0; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { + /* set the minimum ring size to 4, to allow the loopback test to work + * unchanged. + */ + for (i = 2; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { if (lp->tx_ring_size <= (1 << i)) break; } @@ -656,7 +661,7 @@ static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringpara lp->tx_mod_mask = lp->tx_ring_size - 1; lp->tx_len_bits = (i << 12); - for (i = 0; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { + for (i = 2; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { if (lp->rx_ring_size <= (1 << i)) break; } -- GitLab From 65853b133d0256786df25f03eea0e5a6799e8d17 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 16 Sep 2005 02:15:13 -0400 Subject: [PATCH 0046/1519] [PATCH] orinoco: Remove conditionals that are useless in the kernel drivers. Author: Pavel Roskin Date: Fri Sep 16 00:49:05 2005 -0400 Remove conditionals that are useless in the kernel drivers. Kernel drivers are never compiled against pcmcia-cs headers. Firmware is never embedded into spectrum_cs module. Signed-off-by: Pavel Roskin Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco_cs.c | 3 --- drivers/net/wireless/spectrum_cs.c | 26 +------------------------- 2 files changed, 1 insertion(+), 28 deletions(-) diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index bedd7f9f23e4..1cedabf583b3 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -14,9 +14,6 @@ #define PFX DRIVER_NAME ": " #include -#ifdef __IN_PCMCIA_PACKAGE__ -#include -#endif /* __IN_PCMCIA_PACKAGE__ */ #include #include diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 39c6cdf7f3f7..256d31b42966 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -22,9 +22,6 @@ #define PFX DRIVER_NAME ": " #include -#ifdef __IN_PCMCIA_PACKAGE__ -#include -#endif /* __IN_PCMCIA_PACKAGE__ */ #include #include @@ -38,6 +35,7 @@ #include #include #include +#include #include #include @@ -51,29 +49,10 @@ #include "orinoco.h" -/* - * If SPECTRUM_FW_INCLUDED is defined, the firmware is hardcoded into - * the driver. Use get_symbol_fw script to generate spectrum_fw.h and - * copy it to the same directory as spectrum_cs.c. - * - * If SPECTRUM_FW_INCLUDED is not defined, the firmware is loaded at the - * runtime using hotplug. Use the same get_symbol_fw script to generate - * files symbol_sp24t_prim_fw symbol_sp24t_sec_fw, copy them to the - * hotplug firmware directory (typically /usr/lib/hotplug/firmware) and - * make sure that you have hotplug installed and enabled in the kernel. - */ -/* #define SPECTRUM_FW_INCLUDED 1 */ - -#ifdef SPECTRUM_FW_INCLUDED -/* Header with the firmware */ -#include "spectrum_fw.h" -#else /* !SPECTRUM_FW_INCLUDED */ -#include static unsigned char *primsym; static unsigned char *secsym; static const char primary_fw_name[] = "symbol_sp24t_prim_fw"; static const char secondary_fw_name[] = "symbol_sp24t_sec_fw"; -#endif /* !SPECTRUM_FW_INCLUDED */ /********************************************************************/ /* Module stuff */ @@ -571,8 +550,6 @@ spectrum_dl_firmware(hermes_t *hw, dev_link_t *link) { int ret; client_handle_t handle = link->handle; - -#ifndef SPECTRUM_FW_INCLUDED const struct firmware *fw_entry; if (request_firmware(&fw_entry, primary_fw_name, @@ -592,7 +569,6 @@ spectrum_dl_firmware(hermes_t *hw, dev_link_t *link) secondary_fw_name); return -ENOENT; } -#endif /* Load primary firmware */ ret = spectrum_dl_image(hw, link, primsym); -- GitLab From 27c91efba4c121f90c0e6d371c7064733b286a69 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 16 Sep 2005 02:16:52 -0400 Subject: [PATCH 0047/1519] [PATCH] orinoco: Don't include twice. Author: Pavel Roskin Date: Fri Sep 16 00:50:00 2005 -0400 Don't include twice. Signed-off-by: Pavel Roskin Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 639b8e4ba684..77e93a225530 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -94,8 +94,6 @@ #include #include -#include - #include #include #include -- GitLab From 9c8a11d7c2298680ff3ee8acda54575c88668bfc Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 16 Sep 2005 02:18:31 -0400 Subject: [PATCH 0048/1519] [PATCH] orinoco: Update PCMCIA ID's. Author: Pavel Roskin Date: Fri Sep 16 01:07:47 2005 -0400 Update PCMCIA ID's. Intel Pro/Wireless 2011 and 2011B have the same numeric ID, so use strings instead. Take all entries from *.conf for Orinoco, HostAP and linux-wlan-ng and adds them with minimal changes (e.g. we don't need a revision string after a string that identifies the chipset). Add comments with card names to all numeric entries. Note: the comments don't and cannot cover all cards, since the main reason of having numeric IDs is to cover cards that are often rebranded. Signed-off-by: Pavel Roskin Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco_cs.c | 76 ++++++++++++++++++++++-------- drivers/net/wireless/spectrum_cs.c | 2 +- 2 files changed, 57 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 1cedabf583b3..80920b1c6fcf 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -600,49 +600,85 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION "Pavel Roskin , et al)"; static struct pcmcia_device_id orinoco_cs_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), - PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), - PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), - PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), - PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), - PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), - PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ + PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ + PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ + PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ + PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ + PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ + PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ + PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ + PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ + PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ + PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ + PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ + PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ + PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), - PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), + PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), + PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092), + PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), + PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), + PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), + PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), + PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), + PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), + PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), + PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), + PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), + PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2), + PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), + PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), + PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), + PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), + PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), + PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), + PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39), PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), + PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), - PCMCIA_DEVICE_PROD_ID1("Symbol Technologies", 0x3f02b4d6), + PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), + PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), + PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39), + PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 256d31b42966..63e00422d1a0 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -1061,7 +1061,7 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION static struct pcmcia_device_id spectrum_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4100 */ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0001), /* Intel PRO/Wireless 2011B */ + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */ PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); -- GitLab From fd27817ce941c7134adefd2852f8a5f274315ff4 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Tue, 13 Sep 2005 17:25:51 -0500 Subject: [PATCH 0049/1519] [PATCH] Fixed some endian issues with 802.11 header usage in ieee80211_rx.c Fixed some endian issues with 802.11 header usage in ieee80211_rx.c Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_rx.c | 43 ++++++++++++++++++++++-------------- 1 file changed, 26 insertions(+), 17 deletions(-) diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index f7dcd854139e..74c4ed77cfd9 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -787,11 +787,11 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, /* Pull out fixed field data */ memcpy(network->bssid, beacon->header.addr3, ETH_ALEN); - network->capability = beacon->capability; + network->capability = le16_to_cpu(beacon->capability); network->last_scanned = jiffies; - network->time_stamp[0] = beacon->time_stamp[0]; - network->time_stamp[1] = beacon->time_stamp[1]; - network->beacon_interval = beacon->beacon_interval; + network->time_stamp[0] = le32_to_cpu(beacon->time_stamp[0]); + network->time_stamp[1] = le32_to_cpu(beacon->time_stamp[1]); + network->beacon_interval = le16_to_cpu(beacon->beacon_interval); /* Where to pull this? beacon->listen_interval; */ network->listen_interval = 0x0A; network->rates_len = network->rates_ex_len = 0; @@ -1070,8 +1070,9 @@ static inline void ieee80211_process_probe_response(struct ieee80211_device escape_essid(info_element->data, info_element->len), MAC_ARG(beacon->header.addr3), - WLAN_FC_GET_STYPE(beacon->header. - frame_ctl) == + WLAN_FC_GET_STYPE(le16_to_cpu + (beacon->header. + frame_ctl)) == IEEE80211_STYPE_PROBE_RESP ? "PROBE RESPONSE" : "BEACON"); return; @@ -1122,8 +1123,9 @@ static inline void ieee80211_process_probe_response(struct ieee80211_device escape_essid(network.ssid, network.ssid_len), MAC_ARG(network.bssid), - WLAN_FC_GET_STYPE(beacon->header. - frame_ctl) == + WLAN_FC_GET_STYPE(le16_to_cpu + (beacon->header. + frame_ctl)) == IEEE80211_STYPE_PROBE_RESP ? "PROBE RESPONSE" : "BEACON"); #endif @@ -1134,8 +1136,9 @@ static inline void ieee80211_process_probe_response(struct ieee80211_device escape_essid(target->ssid, target->ssid_len), MAC_ARG(target->bssid), - WLAN_FC_GET_STYPE(beacon->header. - frame_ctl) == + WLAN_FC_GET_STYPE(le16_to_cpu + (beacon->header. + frame_ctl)) == IEEE80211_STYPE_PROBE_RESP ? "PROBE RESPONSE" : "BEACON"); update_network(target, &network); @@ -1148,20 +1151,23 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr *header, struct ieee80211_rx_stats *stats) { - switch (WLAN_FC_GET_STYPE(header->frame_ctl)) { + switch (WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl))) { case IEEE80211_STYPE_ASSOC_RESP: IEEE80211_DEBUG_MGMT("received ASSOCIATION RESPONSE (%d)\n", - WLAN_FC_GET_STYPE(header->frame_ctl)); + WLAN_FC_GET_STYPE(le16_to_cpu + (header->frame_ctl))); break; case IEEE80211_STYPE_REASSOC_RESP: IEEE80211_DEBUG_MGMT("received REASSOCIATION RESPONSE (%d)\n", - WLAN_FC_GET_STYPE(header->frame_ctl)); + WLAN_FC_GET_STYPE(le16_to_cpu + (header->frame_ctl))); break; case IEEE80211_STYPE_PROBE_RESP: IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n", - WLAN_FC_GET_STYPE(header->frame_ctl)); + WLAN_FC_GET_STYPE(le16_to_cpu + (header->frame_ctl))); IEEE80211_DEBUG_SCAN("Probe response\n"); ieee80211_process_probe_response(ieee, (struct @@ -1171,7 +1177,8 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee, case IEEE80211_STYPE_BEACON: IEEE80211_DEBUG_MGMT("received BEACON (%d)\n", - WLAN_FC_GET_STYPE(header->frame_ctl)); + WLAN_FC_GET_STYPE(le16_to_cpu + (header->frame_ctl))); IEEE80211_DEBUG_SCAN("Beacon\n"); ieee80211_process_probe_response(ieee, (struct @@ -1181,10 +1188,12 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee, default: IEEE80211_DEBUG_MGMT("received UNKNOWN (%d)\n", - WLAN_FC_GET_STYPE(header->frame_ctl)); + WLAN_FC_GET_STYPE(le16_to_cpu + (header->frame_ctl))); IEEE80211_WARNING("%s: Unknown management packet: %d\n", ieee->dev->name, - WLAN_FC_GET_STYPE(header->frame_ctl)); + WLAN_FC_GET_STYPE(le16_to_cpu + (header->frame_ctl))); break; } } -- GitLab From b1b508e1b13529b3cc5b59c352f49b9b58a302b6 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Tue, 13 Sep 2005 17:27:19 -0500 Subject: [PATCH 0050/1519] [PATCH] ieee80211 quality scaling algorithm extension handler Incorporated Bill Moss' quality scaling algorithm into default wireless extension handler. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 3 +++ net/ieee80211/ieee80211_wx.c | 40 +++++++++++++++++++++++++++--------- 2 files changed, 33 insertions(+), 10 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index dc36b1be6745..ce966b7ff563 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -719,6 +719,9 @@ struct ieee80211_device { int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ int abg_ture; /* ABG flag */ + int perfect_rssi; + int worst_rssi; + /* Callback functions */ void (*set_security)(struct net_device *dev, struct ieee80211_security *sec); diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index 94882f39b072..04f0897b0653 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -140,18 +140,38 @@ static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee, start = iwe_stream_add_point(start, stop, &iwe, custom); /* Add quality statistics */ - /* TODO: Fix these values... */ iwe.cmd = IWEVQUAL; - iwe.u.qual.qual = network->stats.signal; - iwe.u.qual.level = network->stats.rssi; - iwe.u.qual.noise = network->stats.noise; - iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK; - if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) - iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID; - if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) + iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | + IW_QUAL_NOISE_UPDATED; + + if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) { + iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID | + IW_QUAL_LEVEL_INVALID; + iwe.u.qual.qual = 0; + iwe.u.qual.level = 0; + } else { + iwe.u.qual.level = network->stats.rssi; + iwe.u.qual.qual = + (100 * + (ieee->perfect_rssi - ieee->worst_rssi) * + (ieee->perfect_rssi - ieee->worst_rssi) - + (ieee->perfect_rssi - network->stats.rssi) * + (15 * (ieee->perfect_rssi - ieee->worst_rssi) + + 62 * (ieee->perfect_rssi - network->stats.rssi))) / + ((ieee->perfect_rssi - ieee->worst_rssi) * + (ieee->perfect_rssi - ieee->worst_rssi)); + if (iwe.u.qual.qual > 100) + iwe.u.qual.qual = 100; + else if (iwe.u.qual.qual < 1) + iwe.u.qual.qual = 0; + } + + if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) { iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID; - if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL)) - iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID; + iwe.u.qual.noise = 0; + } else { + iwe.u.qual.noise = network->stats.noise; + } start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN); -- GitLab From 74079fdce472a2b16d502fe39e06b135ef06c69b Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Tue, 13 Sep 2005 17:35:21 -0500 Subject: [PATCH 0051/1519] [PATCH] ieee80211 Added wireless spy support Added wireless spy support to Rx code path. Signed-off-by: James Ketrenos NOTE: Looks like scripts/Lindent generated output different than the Lindented version already in-kernel, hence all the whitespace deltas... *sigh* Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 109 +++++++++++---------------- include/net/ieee80211_crypt.h | 24 +++--- net/ieee80211/ieee80211_crypt.c | 24 +++--- net/ieee80211/ieee80211_crypt_ccmp.c | 26 +++---- net/ieee80211/ieee80211_crypt_tkip.c | 26 +++---- net/ieee80211/ieee80211_crypt_wep.c | 26 +++---- net/ieee80211/ieee80211_rx.c | 43 +++++++---- 7 files changed, 134 insertions(+), 144 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index ce966b7ff563..d8bb8f74ed7b 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -20,8 +20,8 @@ */ #ifndef IEEE80211_H #define IEEE80211_H -#include /* ETH_ALEN */ -#include /* ARRAY_SIZE */ +#include /* ETH_ALEN */ +#include /* ARRAY_SIZE */ #include #define IEEE80211_DATA_LEN 2304 @@ -33,7 +33,6 @@ represents the 2304 bytes of real data, plus a possible 8 bytes of WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ - #define IEEE80211_HLEN 30 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) @@ -117,7 +116,6 @@ struct ieee80211_hdr_3addr { #define IEEE80211_SCTL_FRAG 0x000F #define IEEE80211_SCTL_SEQ 0xFFF0 - /* debug macros */ #ifdef CONFIG_IEEE80211_DEBUG @@ -128,8 +126,7 @@ do { if (ieee80211_debug_level & (level)) \ in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) #else #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0) -#endif /* CONFIG_IEEE80211_DEBUG */ - +#endif /* CONFIG_IEEE80211_DEBUG */ /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */ @@ -140,7 +137,6 @@ do { if (ieee80211_debug_level & (level)) \ * messages. It should never be used for passing essid to user space. */ const char *escape_essid(const char *essid, u8 essid_len); - /* * To use the debug system: * @@ -192,7 +188,7 @@ const char *escape_essid(const char *essid, u8 essid_len); #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a) #include #include -#include /* ARPHRD_ETHER */ +#include /* ARPHRD_ETHER */ #ifndef WIRELESS_SPY #define WIRELESS_SPY /* enable iwspy support */ @@ -200,10 +196,10 @@ const char *escape_essid(const char *essid, u8 essid_len); #include /* new driver API */ #ifndef ETH_P_PAE -#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ -#endif /* ETH_P_PAE */ +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#endif /* ETH_P_PAE */ -#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ +#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ #ifndef ETH_P_80211_RAW #define ETH_P_80211_RAW (ETH_P_ECONET + 1) @@ -215,10 +211,10 @@ const char *escape_essid(const char *essid, u8 essid_len); struct ieee80211_snap_hdr { - u8 dsap; /* always 0xAA */ - u8 ssap; /* always 0xAA */ - u8 ctrl; /* always 0x03 */ - u8 oui[P80211_OUI_LEN]; /* organizational universal id */ + u8 dsap; /* always 0xAA */ + u8 ssap; /* always 0xAA */ + u8 ctrl; /* always 0x03 */ + u8 oui[P80211_OUI_LEN]; /* organizational universal id */ } __attribute__ ((packed)); @@ -312,14 +308,12 @@ enum ieee80211_reasoncode { WLAN_REASON_CIPHER_SUITE_REJECTED = 24, }; - #define IEEE80211_STATMASK_SIGNAL (1<<0) #define IEEE80211_STATMASK_RSSI (1<<1) #define IEEE80211_STATMASK_NOISE (1<<2) #define IEEE80211_STATMASK_RATE (1<<3) #define IEEE80211_STATMASK_WEMASK 0x7 - #define IEEE80211_CCK_MODULATION (1<<0) #define IEEE80211_OFDM_MODULATION (1<<1) @@ -377,9 +371,6 @@ enum ieee80211_reasoncode { #define IEEE80211_NUM_CCK_RATES 4 #define IEEE80211_OFDM_SHIFT_MASK_A 4 - - - /* NOTE: This data is for statistical purposes; not all hardware provides this * information for frames received. Not setting these will not cause * any adverse affects. */ @@ -388,7 +379,7 @@ struct ieee80211_rx_stats { s8 rssi; u8 signal; u8 noise; - u16 rate; /* in 100 kbps */ + u16 rate; /* in 100 kbps */ u8 received_channel; u8 control; u8 mask; @@ -449,28 +440,24 @@ struct ieee80211_device; #define SEC_LEVEL (1<<7) #define SEC_ENABLED (1<<8) -#define SEC_LEVEL_0 0 /* None */ -#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ -#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ -#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ -#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ +#define SEC_LEVEL_0 0 /* None */ +#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ +#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ +#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ +#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ #define WEP_KEYS 4 #define WEP_KEY_LEN 13 struct ieee80211_security { u16 active_key:2, - enabled:1, - auth_mode:2, - auth_algo:4, - unicast_uses_group:1; + enabled:1, auth_mode:2, auth_algo:4, unicast_uses_group:1; u8 key_sizes[WEP_KEYS]; u8 keys[WEP_KEYS][WEP_KEY_LEN]; u8 level; u16 flags; } __attribute__ ((packed)); - /* 802.11 data frame from AP @@ -494,7 +481,7 @@ enum ieee80211_mfie { MFIE_TYPE_RATES = 1, MFIE_TYPE_FH_SET = 2, MFIE_TYPE_DS_SET = 3, - MFIE_TYPE_CF_SET = 4, + MFIE_TYPE_CF_SET = 4, MFIE_TYPE_TIM = 5, MFIE_TYPE_IBSS_SET = 6, MFIE_TYPE_COUNTRY = 7, @@ -554,7 +541,6 @@ struct ieee80211_authentication { struct ieee80211_info_element info_element; } __attribute__ ((packed)); - struct ieee80211_probe_response { struct ieee80211_hdr_3addr header; u32 time_stamp[2]; @@ -575,10 +561,9 @@ struct ieee80211_assoc_response_frame { __le16 capability; __le16 status; __le16 aid; - struct ieee80211_info_element info_element; /* supported rates */ + struct ieee80211_info_element info_element; /* supported rates */ } __attribute__ ((packed)); - struct ieee80211_txb { u8 nr_frags; u8 encrypted; @@ -588,7 +573,6 @@ struct ieee80211_txb { struct sk_buff *fragments[0]; }; - /* SWEEP TABLE ENTRIES NUMBER */ #define MAX_SWEEP_TAB_ENTRIES 42 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7 @@ -651,7 +635,6 @@ enum ieee80211_state { #define DEFAULT_MAX_SCAN_AGE (15 * HZ) #define DEFAULT_FTS 2346 - #define CFG_IEEE80211_RESERVE_FCS (1<<0) #define CFG_IEEE80211_COMPUTE_FCS (1<<1) @@ -669,24 +652,25 @@ struct ieee80211_device { int scans; int scan_age; - int iw_mode; /* operating mode (IW_MODE_*) */ + int iw_mode; /* operating mode (IW_MODE_*) */ + struct iw_spy_data spy_data; /* iwspy support */ spinlock_t lock; - int tx_headroom; /* Set to size of any additional room needed at front - * of allocated Tx SKBs */ + int tx_headroom; /* Set to size of any additional room needed at front + * of allocated Tx SKBs */ u32 config; /* WEP and other encryption related settings at the device level */ - int open_wep; /* Set to 1 to allow unencrypted frames */ + int open_wep; /* Set to 1 to allow unencrypted frames */ - int reset_on_keychange; /* Set to 1 if the HW needs to be reset on + int reset_on_keychange; /* Set to 1 if the HW needs to be reset on * WEP key changes */ /* If the host performs {en,de}cryption, then set to 1 */ int host_encrypt; int host_decrypt; - int ieee802_1x; /* is IEEE 802.1X used */ + int ieee802_1x; /* is IEEE 802.1X used */ /* WPA data */ int wpa_enabled; @@ -698,36 +682,36 @@ struct ieee80211_device { struct list_head crypt_deinit_list; struct ieee80211_crypt_data *crypt[WEP_KEYS]; - int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ + int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ struct timer_list crypt_deinit_timer; - int bcrx_sta_key; /* use individual keys to override default keys even - * with RX of broad/multicast frames */ + int bcrx_sta_key; /* use individual keys to override default keys even + * with RX of broad/multicast frames */ /* Fragmentation structures */ struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN]; unsigned int frag_next_idx; - u16 fts; /* Fragmentation Threshold */ + u16 fts; /* Fragmentation Threshold */ /* Association info */ u8 bssid[ETH_ALEN]; enum ieee80211_state state; - int mode; /* A, B, G */ - int modulation; /* CCK, OFDM */ - int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ - int abg_ture; /* ABG flag */ + int mode; /* A, B, G */ + int modulation; /* CCK, OFDM */ + int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ + int abg_ture; /* ABG flag */ int perfect_rssi; int worst_rssi; /* Callback functions */ - void (*set_security)(struct net_device *dev, - struct ieee80211_security *sec); - int (*hard_start_xmit)(struct ieee80211_txb *txb, - struct net_device *dev); - int (*reset_port)(struct net_device *dev); + void (*set_security) (struct net_device * dev, + struct ieee80211_security * sec); + int (*hard_start_xmit) (struct ieee80211_txb * txb, + struct net_device * dev); + int (*reset_port) (struct net_device * dev); /* This must be the last item so that it points to the data * allocated beyond this structure by alloc_ieee80211 */ @@ -760,7 +744,8 @@ extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) return 1; } -extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode) +extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, + int mode) { /* * It is possible for both access points and our device to support @@ -811,8 +796,6 @@ extern inline int ieee80211_get_hdrlen(u16 fc) return hdrlen; } - - /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev); extern struct net_device *alloc_ieee80211(int sizeof_priv); @@ -820,11 +803,9 @@ extern struct net_device *alloc_ieee80211(int sizeof_priv); extern int ieee80211_set_encryption(struct ieee80211_device *ieee); /* ieee80211_tx.c */ -extern int ieee80211_xmit(struct sk_buff *skb, - struct net_device *dev); +extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); - /* ieee80211_rx.c */ extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); @@ -843,7 +824,6 @@ extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *key); - extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee) { ieee->scans++; @@ -854,5 +834,4 @@ extern inline int ieee80211_get_scans(struct ieee80211_device *ieee) return ieee->scans; } - -#endif /* IEEE80211_H */ +#endif /* IEEE80211_H */ diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index b58a3bcc0dc0..93bf91fda82e 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -31,10 +31,10 @@ struct ieee80211_crypto_ops { /* init new crypto context (e.g., allocate private data space, * select IV, etc.); returns NULL on failure or pointer to allocated * private data on success */ - void * (*init)(int keyidx); + void *(*init) (int keyidx); /* deinitialize crypto context and free allocated private data */ - void (*deinit)(void *priv); + void (*deinit) (void *priv); /* encrypt/decrypt return < 0 on error or >= 0 on success. The return * value from decrypt_mpdu is passed as the keyidx value for @@ -42,21 +42,21 @@ struct ieee80211_crypto_ops { * encryption; if not, error will be returned; these functions are * called for all MPDUs (i.e., fragments). */ - int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv); - int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv); + int (*encrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv); + int (*decrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv); /* These functions are called for full MSDUs, i.e. full frames. * These can be NULL if full MSDU operations are not needed. */ - int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv); - int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len, - void *priv); + int (*encrypt_msdu) (struct sk_buff * skb, int hdr_len, void *priv); + int (*decrypt_msdu) (struct sk_buff * skb, int keyidx, int hdr_len, + void *priv); - int (*set_key)(void *key, int len, u8 *seq, void *priv); - int (*get_key)(void *key, int len, u8 *seq, void *priv); + int (*set_key) (void *key, int len, u8 * seq, void *priv); + int (*get_key) (void *key, int len, u8 * seq, void *priv); /* procfs handler for printing out key information and possible * statistics */ - char * (*print_stats)(char *p, void *priv); + char *(*print_stats) (char *p, void *priv); /* maximum number of bytes added by encryption; encrypt buf is * allocated with extra_prefix_len bytes, copy of in_buf, and @@ -69,7 +69,7 @@ struct ieee80211_crypto_ops { }; struct ieee80211_crypt_data { - struct list_head list; /* delayed deletion list */ + struct list_head list; /* delayed deletion list */ struct ieee80211_crypto_ops *ops; void *priv; atomic_t refcnt; @@ -77,7 +77,7 @@ struct ieee80211_crypt_data { int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops); int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops); -struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name); +struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name); void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int); void ieee80211_crypt_deinit_handler(unsigned long); void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee, diff --git a/net/ieee80211/ieee80211_crypt.c b/net/ieee80211/ieee80211_crypt.c index 61a9d92e455b..dc835f68edd3 100644 --- a/net/ieee80211/ieee80211_crypt.c +++ b/net/ieee80211/ieee80211_crypt.c @@ -191,18 +191,18 @@ static void ieee80211_crypt_null_deinit(void *priv) } static struct ieee80211_crypto_ops ieee80211_crypt_null = { - .name = "NULL", - .init = ieee80211_crypt_null_init, - .deinit = ieee80211_crypt_null_deinit, - .encrypt_mpdu = NULL, - .decrypt_mpdu = NULL, - .encrypt_msdu = NULL, - .decrypt_msdu = NULL, - .set_key = NULL, - .get_key = NULL, - .extra_prefix_len = 0, - .extra_postfix_len = 0, - .owner = THIS_MODULE, + .name = "NULL", + .init = ieee80211_crypt_null_init, + .deinit = ieee80211_crypt_null_deinit, + .encrypt_mpdu = NULL, + .decrypt_mpdu = NULL, + .encrypt_msdu = NULL, + .decrypt_msdu = NULL, + .set_key = NULL, + .get_key = NULL, + .extra_prefix_len = 0, + .extra_postfix_len = 0, + .owner = THIS_MODULE, }; static int __init ieee80211_crypto_init(void) diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c index 8fc13f45971e..7b6290885e7d 100644 --- a/net/ieee80211/ieee80211_crypt_ccmp.c +++ b/net/ieee80211/ieee80211_crypt_ccmp.c @@ -426,19 +426,19 @@ static char *ieee80211_ccmp_print_stats(char *p, void *priv) } static struct ieee80211_crypto_ops ieee80211_crypt_ccmp = { - .name = "CCMP", - .init = ieee80211_ccmp_init, - .deinit = ieee80211_ccmp_deinit, - .encrypt_mpdu = ieee80211_ccmp_encrypt, - .decrypt_mpdu = ieee80211_ccmp_decrypt, - .encrypt_msdu = NULL, - .decrypt_msdu = NULL, - .set_key = ieee80211_ccmp_set_key, - .get_key = ieee80211_ccmp_get_key, - .print_stats = ieee80211_ccmp_print_stats, - .extra_prefix_len = CCMP_HDR_LEN, - .extra_postfix_len = CCMP_MIC_LEN, - .owner = THIS_MODULE, + .name = "CCMP", + .init = ieee80211_ccmp_init, + .deinit = ieee80211_ccmp_deinit, + .encrypt_mpdu = ieee80211_ccmp_encrypt, + .decrypt_mpdu = ieee80211_ccmp_decrypt, + .encrypt_msdu = NULL, + .decrypt_msdu = NULL, + .set_key = ieee80211_ccmp_set_key, + .get_key = ieee80211_ccmp_get_key, + .print_stats = ieee80211_ccmp_print_stats, + .extra_prefix_len = CCMP_HDR_LEN, + .extra_postfix_len = CCMP_MIC_LEN, + .owner = THIS_MODULE, }; static int __init ieee80211_crypto_ccmp_init(void) diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c index d4f9164be1a1..dca380e57454 100644 --- a/net/ieee80211/ieee80211_crypt_tkip.c +++ b/net/ieee80211/ieee80211_crypt_tkip.c @@ -654,19 +654,19 @@ static char *ieee80211_tkip_print_stats(char *p, void *priv) } static struct ieee80211_crypto_ops ieee80211_crypt_tkip = { - .name = "TKIP", - .init = ieee80211_tkip_init, - .deinit = ieee80211_tkip_deinit, - .encrypt_mpdu = ieee80211_tkip_encrypt, - .decrypt_mpdu = ieee80211_tkip_decrypt, - .encrypt_msdu = ieee80211_michael_mic_add, - .decrypt_msdu = ieee80211_michael_mic_verify, - .set_key = ieee80211_tkip_set_key, - .get_key = ieee80211_tkip_get_key, - .print_stats = ieee80211_tkip_print_stats, - .extra_prefix_len = 4 + 4, /* IV + ExtIV */ - .extra_postfix_len = 8 + 4, /* MIC + ICV */ - .owner = THIS_MODULE, + .name = "TKIP", + .init = ieee80211_tkip_init, + .deinit = ieee80211_tkip_deinit, + .encrypt_mpdu = ieee80211_tkip_encrypt, + .decrypt_mpdu = ieee80211_tkip_decrypt, + .encrypt_msdu = ieee80211_michael_mic_add, + .decrypt_msdu = ieee80211_michael_mic_verify, + .set_key = ieee80211_tkip_set_key, + .get_key = ieee80211_tkip_get_key, + .print_stats = ieee80211_tkip_print_stats, + .extra_prefix_len = 4 + 4, /* IV + ExtIV */ + .extra_postfix_len = 8 + 4, /* MIC + ICV */ + .owner = THIS_MODULE, }; static int __init ieee80211_crypto_tkip_init(void) diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c index b4d2514a0902..ebe16155e792 100644 --- a/net/ieee80211/ieee80211_crypt_wep.c +++ b/net/ieee80211/ieee80211_crypt_wep.c @@ -229,19 +229,19 @@ static char *prism2_wep_print_stats(char *p, void *priv) } static struct ieee80211_crypto_ops ieee80211_crypt_wep = { - .name = "WEP", - .init = prism2_wep_init, - .deinit = prism2_wep_deinit, - .encrypt_mpdu = prism2_wep_encrypt, - .decrypt_mpdu = prism2_wep_decrypt, - .encrypt_msdu = NULL, - .decrypt_msdu = NULL, - .set_key = prism2_wep_set_key, - .get_key = prism2_wep_get_key, - .print_stats = prism2_wep_print_stats, - .extra_prefix_len = 4, /* IV */ - .extra_postfix_len = 4, /* ICV */ - .owner = THIS_MODULE, + .name = "WEP", + .init = prism2_wep_init, + .deinit = prism2_wep_deinit, + .encrypt_mpdu = prism2_wep_encrypt, + .decrypt_mpdu = prism2_wep_decrypt, + .encrypt_msdu = NULL, + .decrypt_msdu = NULL, + .set_key = prism2_wep_set_key, + .get_key = prism2_wep_get_key, + .print_stats = prism2_wep_print_stats, + .extra_prefix_len = 4, /* IV */ + .extra_postfix_len = 4, /* ICV */ + .owner = THIS_MODULE, }; static int __init ieee80211_crypto_wep_init(void) diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 74c4ed77cfd9..6bbaa44a0d03 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -378,33 +378,47 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, frag = WLAN_GET_SEQ_FRAG(sc); hdrlen = ieee80211_get_hdrlen(fc); -#ifdef NOT_YET -#if WIRELESS_EXT > 15 /* Put this code here so that we avoid duplicating it in all * Rx paths. - Jean II */ #ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */ /* If spy monitoring on */ - if (iface->spy_data.spy_number > 0) { + if (ieee->spy_data.spy_number > 0) { struct iw_quality wstats; - wstats.level = rx_stats->signal; - wstats.noise = rx_stats->noise; - wstats.updated = 6; /* No qual value */ + + wstats.updated = 0; + if (rx_stats->mask & IEEE80211_STATMASK_RSSI) { + wstats.level = rx_stats->rssi; + wstats.updated |= IW_QUAL_LEVEL_UPDATED; + } else + wstats.updated |= IW_QUAL_LEVEL_INVALID; + + if (rx_stats->mask & IEEE80211_STATMASK_NOISE) { + wstats.noise = rx_stats->noise; + wstats.updated |= IW_QUAL_NOISE_UPDATED; + } else + wstats.updated |= IW_QUAL_NOISE_INVALID; + + if (rx_stats->mask & IEEE80211_STATMASK_SIGNAL) { + wstats.qual = rx_stats->signal; + wstats.updated |= IW_QUAL_QUAL_UPDATED; + } else + wstats.updated |= IW_QUAL_QUAL_INVALID; + /* Update spy records */ - wireless_spy_update(dev, hdr->addr2, &wstats); + wireless_spy_update(ieee->dev, hdr->addr2, &wstats); } #endif /* IW_WIRELESS_SPY */ -#endif /* WIRELESS_EXT > 15 */ + +#ifdef NOT_YET hostap_update_rx_stats(local->ap, hdr, rx_stats); #endif -#if WIRELESS_EXT > 15 if (ieee->iw_mode == IW_MODE_MONITOR) { ieee80211_monitor_rx(ieee, skb, rx_stats); stats->rx_packets++; stats->rx_bytes += skb->len; return 1; } -#endif if (ieee->host_decrypt) { int idx = 0; @@ -771,8 +785,7 @@ static inline int ieee80211_is_ofdm_rate(u8 rate) return 0; } -static inline int ieee80211_network_init(struct ieee80211_device *ieee, - struct ieee80211_probe_response +static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct ieee80211_probe_response *beacon, struct ieee80211_network *network, struct ieee80211_rx_stats *stats) @@ -1028,11 +1041,9 @@ static inline void update_network(struct ieee80211_network *dst, } static inline void ieee80211_process_probe_response(struct ieee80211_device - *ieee, - struct + *ieee, struct ieee80211_probe_response - *beacon, - struct ieee80211_rx_stats + *beacon, struct ieee80211_rx_stats *stats) { struct ieee80211_network network; -- GitLab From 68e4e036b841d5fb23ae1ac51b1e40baf9d582bf Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Tue, 13 Sep 2005 17:37:22 -0500 Subject: [PATCH 0052/1519] [PATCH] Changed 802.11 headers to use ieee80211_info_element[0] Changed 802.11 headers to use ieee80211_info_element as zero sized array so that sizeof calculations do not account for IE sizes. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 8 ++++---- net/ieee80211/ieee80211_rx.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index d8bb8f74ed7b..6394ae4bf17d 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -538,7 +538,7 @@ struct ieee80211_authentication { __le16 algorithm; __le16 transaction; __le16 status; - struct ieee80211_info_element info_element; + struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); struct ieee80211_probe_response { @@ -546,14 +546,14 @@ struct ieee80211_probe_response { u32 time_stamp[2]; __le16 beacon_interval; __le16 capability; - struct ieee80211_info_element info_element; + struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); struct ieee80211_assoc_request_frame { __le16 capability; __le16 listen_interval; u8 current_ap[ETH_ALEN]; - struct ieee80211_info_element info_element; + struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); struct ieee80211_assoc_response_frame { @@ -561,7 +561,7 @@ struct ieee80211_assoc_response_frame { __le16 capability; __le16 status; __le16 aid; - struct ieee80211_info_element info_element; /* supported rates */ + struct ieee80211_info_element info_element[0]; /* supported rates */ } __attribute__ ((packed)); struct ieee80211_txb { diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 6bbaa44a0d03..cae55e5ccb2e 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -822,7 +822,7 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i network->wpa_ie_len = 0; network->rsn_ie_len = 0; - info_element = &beacon->info_element; + info_element = beacon->info_element; left = stats->len - ((void *)info_element - (void *)beacon); while (left >= sizeof(struct ieee80211_info_element_hdr)) { if (sizeof(struct ieee80211_info_element_hdr) + @@ -1050,7 +1050,7 @@ static inline void ieee80211_process_probe_response(struct ieee80211_device struct ieee80211_network *target; struct ieee80211_network *oldest = NULL; #ifdef CONFIG_IEEE80211_DEBUG - struct ieee80211_info_element *info_element = &beacon->info_element; + struct ieee80211_info_element *info_element = beacon->info_element; #endif unsigned long flags; -- GitLab From 7b1fa54020985fa4b154f9f5d2f04ba174c7f1a5 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Tue, 13 Sep 2005 17:38:13 -0500 Subject: [PATCH 0053/1519] [PATCH] ieee80211 Removed ieee80211_info_element_hdr Removed ieee80211_info_element_hdr structure as ieee80211_info_element provides the same use. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 5 ----- net/ieee80211/ieee80211_rx.c | 10 +++++----- 2 files changed, 5 insertions(+), 10 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 6394ae4bf17d..27374c27c408 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -505,11 +505,6 @@ enum ieee80211_mfie { MFIE_TYPE_GENERIC = 221, }; -struct ieee80211_info_element_hdr { - u8 id; - u8 len; -} __attribute__ ((packed)); - struct ieee80211_info_element { u8 id; u8 len; diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index cae55e5ccb2e..e0337c8fcde8 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -823,10 +823,10 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i network->rsn_ie_len = 0; info_element = beacon->info_element; - left = stats->len - ((void *)info_element - (void *)beacon); - while (left >= sizeof(struct ieee80211_info_element_hdr)) { - if (sizeof(struct ieee80211_info_element_hdr) + - info_element->len > left) { + left = stats->len - sizeof(*beacon); + while (left >= sizeof(struct ieee80211_info_element)) { + if (sizeof(struct ieee80211_info_element) + info_element->len > + left) { IEEE80211_DEBUG_SCAN ("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%Zd left=%d.\n", info_element->len + @@ -967,7 +967,7 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i break; } - left -= sizeof(struct ieee80211_info_element_hdr) + + left -= sizeof(struct ieee80211_info_element) + info_element->len; info_element = (struct ieee80211_info_element *) &info_element->data[info_element->len]; -- GitLab From 18294d8727b825eb2f3f98d6b6ae4a999dff854a Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Tue, 13 Sep 2005 17:40:29 -0500 Subject: [PATCH 0054/1519] [PATCH] ieee80211 Cleanup memcpy parameters. Cleanup memcpy parameters. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_tx.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index c9aaff3fea1e..1a09448016ed 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -285,8 +285,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) } /* Save source and destination addresses */ - memcpy(&dest, skb->data, ETH_ALEN); - memcpy(&src, skb->data + ETH_ALEN, ETH_ALEN); + memcpy(dest, skb->data, ETH_ALEN); + memcpy(src, skb->data + ETH_ALEN, ETH_ALEN); /* Advance the SKB to the start of the payload */ skb_pull(skb, sizeof(struct ethhdr)); @@ -304,15 +304,15 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) fc |= IEEE80211_FCTL_TODS; /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */ - memcpy(&header.addr1, ieee->bssid, ETH_ALEN); - memcpy(&header.addr2, &src, ETH_ALEN); - memcpy(&header.addr3, &dest, ETH_ALEN); + memcpy(header.addr1, ieee->bssid, ETH_ALEN); + memcpy(header.addr2, src, ETH_ALEN); + memcpy(header.addr3, dest, ETH_ALEN); } else if (ieee->iw_mode == IW_MODE_ADHOC) { /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */ - memcpy(&header.addr1, dest, ETH_ALEN); - memcpy(&header.addr2, src, ETH_ALEN); - memcpy(&header.addr3, ieee->bssid, ETH_ALEN); + memcpy(header.addr1, dest, ETH_ALEN); + memcpy(header.addr2, src, ETH_ALEN); + memcpy(header.addr3, ieee->bssid, ETH_ALEN); } header.frame_ctl = cpu_to_le16(fc); hdr_len = IEEE80211_3ADDR_LEN; -- GitLab From 262d8e467710a1c870717bc432caaf74cde3ce20 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Tue, 13 Sep 2005 17:42:53 -0500 Subject: [PATCH 0055/1519] [PATCH] ieee80211 Switched to sscanf in store_debug_level Switched to sscanf as per friendly comment in store_debug_level. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_module.c | 26 ++++++-------------------- 1 file changed, 6 insertions(+), 20 deletions(-) diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 03a47343ddc7..4b43ae1235f9 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -195,34 +195,20 @@ static int show_debug_level(char *page, char **start, off_t offset, static int store_debug_level(struct file *file, const char __user * buffer, unsigned long count, void *data) { - char buf[] = "0x00000000"; - char *p = (char *)buf; + char buf[] = "0x00000000\n"; + unsigned long len = min((unsigned long)sizeof(buf) - 1, count); unsigned long val; - if (count > sizeof(buf) - 1) - count = sizeof(buf) - 1; - - if (copy_from_user(buf, buffer, count)) + if (copy_from_user(buf, buffer, len)) return count; - buf[count] = 0; - /* - * what a FPOS... What, sscanf(buf, "%i", &val) would be too - * scary? - */ - if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') { - p++; - if (p[0] == 'x' || p[0] == 'X') - p++; - val = simple_strtoul(p, &p, 16); - } else - val = simple_strtoul(p, &p, 10); - if (p == buf) + buf[len] = 0; + if (sscanf(buf, "%li", &val) != 1) printk(KERN_INFO DRV_NAME ": %s is not in hex or decimal form.\n", buf); else ieee80211_debug_level = val; - return strlen(buf); + return strnlen(buf, len); } static int __init ieee80211_init(void) -- GitLab From 3bc5ed684253f407b1567799d13cb06a0d86fe80 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Tue, 13 Sep 2005 17:48:54 -0500 Subject: [PATCH 0056/1519] [PATCH] ieee80211 Fixed type-o of abg_ture -> abg_true [PATCH 14/29] Fixed type-o of abg_ture -> abg_true. Signed-off-by: James Ketrenos NOTE: This patch requires drivers using abg_ture to be updated. Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 27374c27c408..2d9c679cf6b6 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -696,7 +696,7 @@ struct ieee80211_device { int mode; /* A, B, G */ int modulation; /* CCK, OFDM */ int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ - int abg_ture; /* ABG flag */ + int abg_true; /* ABG flag */ int perfect_rssi; int worst_rssi; -- GitLab From a33a1982012e9070736e3717231714dc9892303b Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 14 Sep 2005 14:28:59 -0500 Subject: [PATCH 0057/1519] [PATCH] Updated ipw2200 to compile with ieee80211 abg_ture to abg_true change author James Ketrenos 1126713327 -0500 committer James Ketrenos 1126713327 -0500 Updated ipw2200 to compile with ieee80211 abg_ture to abg_true change. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2200.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index b7f275c00de3..86feef732dbb 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -6010,12 +6010,12 @@ static int ipw_wx_set_wireless_mode(struct net_device *dev, } if (priv->adapter == IPW_2915ABG) { - priv->ieee->abg_ture = 1; + priv->ieee->abg_true = 1; if (mode & IEEE_A) { band |= IEEE80211_52GHZ_BAND; modulation |= IEEE80211_OFDM_MODULATION; } else - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; } else { if (mode & IEEE_A) { IPW_WARNING("Attempt to set 2200BG into " @@ -6023,20 +6023,20 @@ static int ipw_wx_set_wireless_mode(struct net_device *dev, return -EINVAL; } - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; } if (mode & IEEE_B) { band |= IEEE80211_24GHZ_BAND; modulation |= IEEE80211_CCK_MODULATION; } else - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; if (mode & IEEE_G) { band |= IEEE80211_24GHZ_BAND; modulation |= IEEE80211_OFDM_MODULATION; } else - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; priv->ieee->mode = mode; priv->ieee->freq_band = band; @@ -7108,7 +7108,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) printk(KERN_INFO DRV_NAME ": Detected Intel PRO/Wireless 2915ABG Network " "Connection\n"); - priv->ieee->abg_ture = 1; + priv->ieee->abg_true = 1; band = IEEE80211_52GHZ_BAND | IEEE80211_24GHZ_BAND; modulation = IEEE80211_OFDM_MODULATION | IEEE80211_CCK_MODULATION; @@ -7124,7 +7124,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ": Detected Intel PRO/Wireless 2200BG Network " "Connection\n"); - priv->ieee->abg_ture = 0; + priv->ieee->abg_true = 0; band = IEEE80211_24GHZ_BAND; modulation = IEEE80211_OFDM_MODULATION | IEEE80211_CCK_MODULATION; -- GitLab From 54703d3678d13e7406d0b5aa451abb9526d53b9d Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Wed, 14 Sep 2005 10:33:40 -0500 Subject: [PATCH 0058/1519] [IA64] Increase max NR_CPUS on IA64 from 512 to 1024 This patch increases the maximum number of cpus supported on IA64 to 1024. No changes are made to the default SSI size. The patch simply allows specifying up to 1024p. There are certainly scaling (& other) issues that also need to be addressed!!! Additional patches will follow..... Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 945c15a0722b..cb7fc19ff080 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -254,8 +254,8 @@ config SMP If you don't know what to do here, say N. config NR_CPUS - int "Maximum number of CPUs (2-512)" - range 2 512 + int "Maximum number of CPUs (2-1024)" + range 2 1024 depends on SMP default "64" help -- GitLab From be379124c0a5abfbe57dab2823fe8a71ce797aee Mon Sep 17 00:00:00 2001 From: Khalid Aziz Date: Mon, 19 Sep 2005 15:42:36 -0700 Subject: [PATCH 0059/1519] [IA64] include EFI memory information in /proc/iomem User mode kexec tools expect to find information about physical memory in /proc/iomem (as they do on x86) to validate the addresses that the new kernel will use. Signed-off-by: Khalid Aziz Signed-off-by: Tony Luck --- arch/ia64/kernel/efi.c | 87 ++++++++++++++++++++++++++++++++++++++++ arch/ia64/kernel/setup.c | 29 ++++++++++++++ 2 files changed, 116 insertions(+) diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 1291db581721..f72ea6aebcb1 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -923,3 +923,90 @@ efi_memmap_init(unsigned long *s, unsigned long *e) *s = (u64)kern_memmap; *e = (u64)++k; } + +void +efi_initialize_iomem_resources(struct resource *code_resource, + struct resource *data_resource) +{ + struct resource *res; + void *efi_map_start, *efi_map_end, *p; + efi_memory_desc_t *md; + u64 efi_desc_size; + char *name; + unsigned long flags; + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + res = NULL; + + for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { + md = p; + + if (md->num_pages == 0) /* should not happen */ + continue; + + flags = IORESOURCE_MEM; + switch (md->type) { + + case EFI_MEMORY_MAPPED_IO: + case EFI_MEMORY_MAPPED_IO_PORT_SPACE: + continue; + + case EFI_LOADER_CODE: + case EFI_LOADER_DATA: + case EFI_BOOT_SERVICES_DATA: + case EFI_BOOT_SERVICES_CODE: + case EFI_CONVENTIONAL_MEMORY: + if (md->attribute & EFI_MEMORY_WP) { + name = "System ROM"; + flags |= IORESOURCE_READONLY; + } else { + name = "System RAM"; + } + break; + + case EFI_ACPI_MEMORY_NVS: + name = "ACPI Non-volatile Storage"; + flags |= IORESOURCE_BUSY; + break; + + case EFI_UNUSABLE_MEMORY: + name = "reserved"; + flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED; + break; + + case EFI_RESERVED_TYPE: + case EFI_RUNTIME_SERVICES_CODE: + case EFI_RUNTIME_SERVICES_DATA: + case EFI_ACPI_RECLAIM_MEMORY: + default: + name = "reserved"; + flags |= IORESOURCE_BUSY; + break; + } + + if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) { + printk(KERN_ERR "failed to alocate resource for iomem\n"); + return; + } + + res->name = name; + res->start = md->phys_addr; + res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1; + res->flags = flags; + + if (insert_resource(&iomem_resource, res) < 0) + kfree(res); + else { + /* + * We don't know which region contains + * kernel data so we try it repeatedly and + * let the resource manager test it. + */ + insert_resource(res, code_resource); + insert_resource(res, data_resource); + } + } +} diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 1658d687b79c..83b37c410ccd 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -78,6 +78,19 @@ struct screen_info screen_info; unsigned long vga_console_iobase; unsigned long vga_console_membase; +static struct resource data_resource = { + .name = "Kernel data", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +static struct resource code_resource = { + .name = "Kernel code", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; +extern void efi_initialize_iomem_resources(struct resource *, + struct resource *); +extern char _text[], _edata[], _etext[]; + unsigned long ia64_max_cacheline_size; unsigned long ia64_iobase; /* virtual address for I/O accesses */ EXPORT_SYMBOL(ia64_iobase); @@ -171,6 +184,22 @@ sort_regions (struct rsvd_region *rsvd_region, int max) } } +/* + * Request address space for all standard resources + */ +static int __init register_memory(void) +{ + code_resource.start = ia64_tpa(_text); + code_resource.end = ia64_tpa(_etext) - 1; + data_resource.start = ia64_tpa(_etext); + data_resource.end = ia64_tpa(_edata) - 1; + efi_initialize_iomem_resources(&code_resource, &data_resource); + + return 0; +} + +__initcall(register_memory); + /** * reserve_memory - setup reserved memory areas * -- GitLab From 44c451208da397438e7062393aeb3a19ddb76a60 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 16 Sep 2005 11:43:10 -0600 Subject: [PATCH 0060/1519] [IA64] ia64: add ar.k0 usage note Update comment about how ar.k0 is used. Make the initialization the same as in start_secondary() (no functional change, just make it look more similar). Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 1f5c26dbe705..e256b114bf4e 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -244,28 +244,31 @@ find_initrd (void) static void __init io_port_init (void) { - extern unsigned long ia64_iobase; unsigned long phys_iobase; /* - * Set `iobase' to the appropriate address in region 6 (uncached access range). + * Set `iobase' based on the EFI memory map or, failing that, the + * value firmware left in ar.k0. * - * The EFI memory map is the "preferred" location to get the I/O port space base, - * rather the relying on AR.KR0. This should become more clear in future SAL - * specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is - * found in the memory map. + * Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute + * the port's virtual address, so ia32_load_state() loads it with a + * user virtual address. But in ia64 mode, glibc uses the + * *physical* address in ar.k0 to mmap the appropriate area from + * /dev/mem, and the inX()/outX() interfaces use MMIO. In both + * cases, user-mode can only use the legacy 0-64K I/O port space. + * + * ar.k0 is not involved in kernel I/O port accesses, which can use + * any of the I/O port spaces and are done via MMIO using the + * virtual mmio_base from the appropriate io_space[]. */ phys_iobase = efi_get_iobase(); - if (phys_iobase) - /* set AR.KR0 since this is all we use it for anyway */ - ia64_set_kr(IA64_KR_IO_BASE, phys_iobase); - else { + if (!phys_iobase) { phys_iobase = ia64_get_kr(IA64_KR_IO_BASE); - printk(KERN_INFO "No I/O port range found in EFI memory map, falling back " - "to AR.KR0\n"); - printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase); + printk(KERN_INFO "No I/O port range found in EFI memory map, " + "falling back to AR.KR0 (0x%lx)\n", phys_iobase); } ia64_iobase = (unsigned long) ioremap(phys_iobase, 0); + ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase)); /* setup legacy IO port space */ io_space[0].mmio_base = ia64_iobase; -- GitLab From 650316f1228c0dc5e45c17765caef30db62468cd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 16 Sep 2005 11:43:45 -0600 Subject: [PATCH 0061/1519] [IA64] move ACPI IOSAPIC locality domain mapping from pci.c to acpi.c Move acpi_map_iosapics() from pci.c to acpi.c, since it doesn't have anything to do with PCI. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/kernel/acpi.c | 13 +++++++++++-- arch/ia64/pci/pci.c | 23 ----------------------- 2 files changed, 11 insertions(+), 25 deletions(-) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 7e926471e4ec..9ad94ddf6687 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -838,7 +838,7 @@ EXPORT_SYMBOL(acpi_unmap_lsapic); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ #ifdef CONFIG_ACPI_NUMA -acpi_status __devinit +static acpi_status __devinit acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -890,7 +890,16 @@ acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) map_iosapic_to_node(gsi_base, node); return AE_OK; } -#endif /* CONFIG_NUMA */ + +static int __init +acpi_map_iosapics (void) +{ + acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); + return 0; +} + +fs_initcall(acpi_map_iosapics); +#endif /* CONFIG_ACPI_NUMA */ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 9b5de589b82f..6bf48d7842c6 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -120,29 +120,6 @@ struct pci_ops pci_root_ops = { .write = pci_write, }; -#ifdef CONFIG_NUMA -extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **); -static void acpi_map_iosapics(void) -{ - acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); -} -#else -static void acpi_map_iosapics(void) -{ - return; -} -#endif /* CONFIG_NUMA */ - -static int __init -pci_acpi_init (void) -{ - acpi_map_iosapics(); - - return 0; -} - -subsys_initcall(pci_acpi_init); - /* Called by ACPI when it finds a new root bus. */ static struct pci_controller * __devinit -- GitLab From 99a4b232b6682a847c70d877e4a3c15e9138c8f6 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:25 -0500 Subject: [PATCH 0062/1519] [PATCH] ieee80211: Updated ipw2100 to be compatible with ieee80211_hdr changes tree 992b203395c50342f1cced415acae6177344e270 parent c59bb604a2ff4e40232ff0422e7adc44e3b007a0 author James Ketrenos 1126714006 -0500 committer James Ketrenos 1127315910 -0500 Updated ipw2100 to be compatible with ieee80211_hdr changes. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2100.c | 4 ++-- drivers/net/wireless/ipw2100.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index e5cdb5bfabc8..8dc80f806c34 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -2948,7 +2948,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) int next = txq->next; int i = 0; struct ipw2100_data_header *ipw_hdr; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_3addr *hdr; while (!list_empty(&priv->tx_pend_list)) { /* if there isn't enough space in TBD queue, then @@ -2984,7 +2984,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) packet->index = txq->next; ipw_hdr = packet->info.d_struct.data; - hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb-> + hdr = (struct ieee80211_hdr_3addr *)packet->info.d_struct.txb-> fragments[0]->data; if (priv->ieee->iw_mode == IW_MODE_INFRA) { diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h index 2a3cdbd50168..c9e99ce15d66 100644 --- a/drivers/net/wireless/ipw2100.h +++ b/drivers/net/wireless/ipw2100.h @@ -808,7 +808,7 @@ struct ipw2100_priv { struct ipw2100_rx { union { unsigned char payload[IPW_RX_NIC_BUFFER_LENGTH]; - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; u32 status; struct ipw2100_notification notification; struct ipw2100_cmd_header command; -- GitLab From 3a5becf720d6346ffca2d6be6473f603b39322a2 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:37 -0500 Subject: [PATCH 0063/1519] [PATCH] ieee80211: Updated ipw2100 to be compatible with ieee80211's hard_start_xmit change tree ee48cbe413b795d6be454b9baf4f3bd3d74814cb parent 49856b147763bd6847e0d8f53aee1ddd61385638 author James Ketrenos 1126716634 -0500 committer James Ketrenos 1127316024 -0500 Updated ipw2100 to be compatible with ieee80211's hard_start_xmit change. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 8dc80f806c34..ad7f8cd76db9 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -3269,7 +3269,8 @@ static irqreturn_t ipw2100_interrupt(int irq, void *data, return IRQ_NONE; } -static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev) +static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev, + int pri) { struct ipw2100_priv *priv = ieee80211_priv(dev); struct list_head *element; -- GitLab From 0dacca1f0a53938dd7d5ba35c692bd1a3356d504 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:41 -0500 Subject: [PATCH 0064/1519] [PATCH] ieee80211: Updated ipw2200 to be compatible with ieee80211_hdr changes tree 9f86c7b4f59249c05c96c360dfaa817995e8a44f parent 9b09701b2c6254f2fddb009004a14eb5a908714f author James Ketrenos 1126714305 -0500 committer James Ketrenos 1127316074 -0500 Updated ipw2200 to be compatible with ieee80211_hdr changes. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2200.c | 9 +++++---- drivers/net/wireless/ipw2200.h | 4 ++-- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 86feef732dbb..34f005229ddb 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -4904,7 +4904,7 @@ static void ipw_rx(struct ipw_priv *priv) { struct ipw_rx_mem_buffer *rxb; struct ipw_rx_packet *pkt; - struct ieee80211_hdr *header; + struct ieee80211_hdr_4addr *header; u32 r, w, i; u8 network_packet; @@ -4967,8 +4967,9 @@ static void ipw_rx(struct ipw_priv *priv) #endif header = - (struct ieee80211_hdr *)(rxb->skb->data + - IPW_RX_FRAME_SIZE); + (struct ieee80211_hdr_4addr *)(rxb->skb-> + data + + IPW_RX_FRAME_SIZE); /* TODO: Check Ad-Hoc dest/source and make sure * that we are actually parsing these packets * correctly -- we should probably use the @@ -6325,7 +6326,7 @@ we need to heavily modify the ieee80211_skb_to_txb. static inline void ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) + struct ieee80211_hdr_3addr *hdr = (struct ieee80211_hdr_3addr *) txb->fragments[0]->data; int i = 0; struct tfd_frame *tfd; diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index 5b00882133f9..e9cf32bf3e31 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1654,12 +1654,12 @@ static const long ipw_frequencies[] = { #define IPW_MAX_CONFIG_RETRIES 10 -static inline u32 frame_hdr_len(struct ieee80211_hdr *hdr) +static inline u32 frame_hdr_len(struct ieee80211_hdr_4addr *hdr) { u32 retval; u16 fc; - retval = sizeof(struct ieee80211_hdr); + retval = sizeof(struct ieee80211_hdr_3addr); fc = le16_to_cpu(hdr->frame_ctl); /* -- GitLab From c8d42d1ae4518091a20f7212b0591a0f4b0e8ca0 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:43 -0500 Subject: [PATCH 0065/1519] [PATCH] ieee80211: Updated ipw2200 to be compatible with ieee80211's hard_start_xmit change. tree 713b6ff3311decfe42d5209f7b2508736d144b85 parent 6465beff0e89779330450dffc2a5e6dc5154eebf author James Ketrenos 1126716726 -0500 committer James Ketrenos 1127316162 -0500 Updated ipw2200 to be compatible with ieee80211's hard_start_xmit change. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 34f005229ddb..7ea9bd58f65f 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -6449,7 +6449,7 @@ static inline void ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb) } static int ipw_net_hard_start_xmit(struct ieee80211_txb *txb, - struct net_device *dev) + struct net_device *dev, int pri) { struct ipw_priv *priv = ieee80211_priv(dev); unsigned long flags; -- GitLab From 4ca5253d573d7b3785dbb2f123f948fdca6ee235 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:46 -0500 Subject: [PATCH 0066/1519] [PATCH] ieee80211: Updated atmel to be compatible with ieee80211_hdr changes tree d7be83000b058b14450d76f99c432b1fb2a1c177 parent 322201093e03830fceedfc24931420b1ea855a8c author James Ketrenos 1127316330 -0500 committer James Ketrenos 1127316330 -0500 Updated atmel to be compatible with ieee80211_hdr changes. Change accomplished via: sed -i -e "s:ieee80211_hdr\([^_]\):ieee80211_hdr_4addr\1:g" \ drivers/net/wireless/atmel.c Compile tested only. CC: simon@thekelleys.org.uk Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/atmel.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 587869d86eee..d57011028b72 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -618,12 +618,12 @@ static int atmel_lock_mac(struct atmel_private *priv); static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data); static void atmel_command_irq(struct atmel_private *priv); static int atmel_validate_channel(struct atmel_private *priv, int channel); -static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, +static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 frame_len, u8 rssi); static void atmel_management_timer(u_long a); static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size); static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size); -static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, +static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u8 *body, int body_len); static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index); @@ -827,7 +827,7 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l static int start_tx (struct sk_buff *skb, struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; unsigned long flags; u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; @@ -902,7 +902,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) } static void atmel_transmit_management_frame(struct atmel_private *priv, - struct ieee80211_hdr *header, + struct ieee80211_hdr_4addr *header, u8 *body, int body_len) { u16 buff; @@ -917,7 +917,7 @@ static void atmel_transmit_management_frame(struct atmel_private *priv, tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT); } -static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header, +static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 msdu_size, u16 rx_packet_loc, u32 crc) { /* fast path: unfragmented packet copy directly into skbuf */ @@ -990,7 +990,7 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) return (crc ^ 0xffffffff) == netcrc; } -static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr *header, +static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags) { u8 mac4[6]; @@ -1082,7 +1082,7 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr *heade static void rx_done_irq(struct atmel_private *priv) { int i; - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; for (i = 0; atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID && @@ -2650,7 +2650,7 @@ static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 c static void send_authentication_request(struct atmel_private *priv, u8 *challenge, int challenge_len) { - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; struct auth_body auth; header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); @@ -2688,7 +2688,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) { u8 *ssid_el_p; int bodysize; - struct ieee80211_hdr header; + struct ieee80211_hdr_4addr header; struct ass_req_format { u16 capability; u16 listen_interval; @@ -2738,7 +2738,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize); } -static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr *header) +static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr_4addr *header) { if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0; @@ -2788,7 +2788,7 @@ static int retrieve_bss(struct atmel_private *priv) } -static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr *header, +static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 capability, u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len, u8 *ssid, int is_beacon) { @@ -3072,7 +3072,7 @@ static void atmel_smooth_qual(struct atmel_private *priv) } /* deals with incoming managment frames. */ -static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr *header, +static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u16 frame_len, u8 rssi) { u16 subtype; -- GitLab From 20d64713ae71c0b0aa06084acbef2244021baaca Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:53:43 -0500 Subject: [PATCH 0067/1519] [PATCH] ieee80211: Fixed a kernel oops on module unload tree 367069f24fc38b4aa910e86ff40094d2078d8aa7 parent a33a1982012e9070736e3717231714dc9892303b author James Ketrenos 1124430800 -0500 committer James Ketrenos 1127310571 -0500 Fixed a kernel oops on module unload by adding spin lock protection to ieee80211's crypt handlers (thanks to Zhu Yi) Modified scan result logic to report WPA and RSN IEs if set (vs.being based on wpa_enabled) Added ieee80211_device as the first parameter to the crypt init() method. TKIP modified to use that structure for determining whether to countermeasures are active. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 1 + include/net/ieee80211_crypt.h | 2 +- net/ieee80211/ieee80211_crypt.c | 9 ++++---- net/ieee80211/ieee80211_crypt_ccmp.c | 2 +- net/ieee80211/ieee80211_crypt_tkip.c | 31 +++++++++++++++++++++++++--- net/ieee80211/ieee80211_crypt_wep.c | 2 +- net/ieee80211/ieee80211_rx.c | 11 ---------- net/ieee80211/ieee80211_tx.c | 14 ------------- net/ieee80211/ieee80211_wx.c | 6 +++--- 9 files changed, 40 insertions(+), 38 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 2d9c679cf6b6..ed06a9454edc 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -434,6 +434,7 @@ struct ieee80211_device; #define SEC_KEY_2 (1<<1) #define SEC_KEY_3 (1<<2) #define SEC_KEY_4 (1<<3) +#define SEC_KEY_MASK (SEC_KEY_1 | SEC_KEY_2 | SEC_KEY_3 | SEC_KEY_4) #define SEC_ACTIVE_KEY (1<<4) #define SEC_AUTH_MODE (1<<5) #define SEC_UNICAST_GROUP (1<<6) diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index 93bf91fda82e..e2064edb957d 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -31,7 +31,7 @@ struct ieee80211_crypto_ops { /* init new crypto context (e.g., allocate private data space, * select IV, etc.); returns NULL on failure or pointer to allocated * private data on success */ - void *(*init) (int keyidx); + void *(*init) (struct ieee80211_device * ieee, int keyidx); /* deinitialize crypto context and free allocated private data */ void (*deinit) (void *priv); diff --git a/net/ieee80211/ieee80211_crypt.c b/net/ieee80211/ieee80211_crypt.c index dc835f68edd3..0c366299db0f 100644 --- a/net/ieee80211/ieee80211_crypt.c +++ b/net/ieee80211/ieee80211_crypt.c @@ -41,7 +41,9 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, int force) { struct list_head *ptr, *n; struct ieee80211_crypt_data *entry; + unsigned long flags; + spin_lock_irqsave(&ieee->lock, flags); for (ptr = ieee->crypt_deinit_list.next, n = ptr->next; ptr != &ieee->crypt_deinit_list; ptr = n, n = ptr->next) { entry = list_entry(ptr, struct ieee80211_crypt_data, list); @@ -57,14 +59,13 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, int force) } kfree(entry); } + spin_unlock_irqrestore(&ieee->lock, flags); } void ieee80211_crypt_deinit_handler(unsigned long data) { struct ieee80211_device *ieee = (struct ieee80211_device *)data; - unsigned long flags; - spin_lock_irqsave(&ieee->lock, flags); ieee80211_crypt_deinit_entries(ieee, 0); if (!list_empty(&ieee->crypt_deinit_list)) { printk(KERN_DEBUG "%s: entries remaining in delayed crypt " @@ -72,7 +73,6 @@ void ieee80211_crypt_deinit_handler(unsigned long data) ieee->crypt_deinit_timer.expires = jiffies + HZ; add_timer(&ieee->crypt_deinit_timer); } - spin_unlock_irqrestore(&ieee->lock, flags); } @@ -182,7 +182,8 @@ struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name) return NULL; } -static void *ieee80211_crypt_null_init(int keyidx) +static void *ieee80211_crypt_null_init(struct ieee80211_device *ieee, + int keyidx) { return (void *)1; } diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c index 7b6290885e7d..1e6644b133dc 100644 --- a/net/ieee80211/ieee80211_crypt_ccmp.c +++ b/net/ieee80211/ieee80211_crypt_ccmp.c @@ -74,7 +74,7 @@ static void ieee80211_ccmp_aes_encrypt(struct crypto_tfm *tfm, crypto_cipher_encrypt(tfm, &dst, &src, AES_BLOCK_LEN); } -static void *ieee80211_ccmp_init(int key_idx) +static void *ieee80211_ccmp_init(struct ieee80211_device *ieee, int key_idx) { struct ieee80211_ccmp_data *priv; diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c index dca380e57454..0c495f07e718 100644 --- a/net/ieee80211/ieee80211_crypt_tkip.c +++ b/net/ieee80211/ieee80211_crypt_tkip.c @@ -59,9 +59,11 @@ struct ieee80211_tkip_data { /* scratch buffers for virt_to_page() (crypto API) */ u8 rx_hdr[16], tx_hdr[16]; + + struct ieee80211_device *ieee; }; -static void *ieee80211_tkip_init(int key_idx) +static void *ieee80211_tkip_init(struct ieee80211_device *ieee, int key_idx) { struct ieee80211_tkip_data *priv; @@ -69,6 +71,9 @@ static void *ieee80211_tkip_init(int key_idx) if (priv == NULL) goto fail; memset(priv, 0, sizeof(*priv)); + + priv->ieee = ieee; + priv->key_idx = key_idx; priv->tfm_arc4 = crypto_alloc_tfm("arc4", 0); @@ -264,11 +269,21 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) u32 crc; struct scatterlist sg; + hdr = (struct ieee80211_hdr *)skb->data; + + if (tkey->ieee->tkip_countermeasures) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + "TX packet to " MAC_FMT "\n", + tkey->ieee->dev->name, MAC_ARG(hdr->addr1)); + } + return -1; + } + if (skb_headroom(skb) < 8 || skb_tailroom(skb) < 4 || skb->len < hdr_len) return -1; - hdr = (struct ieee80211_hdr *)skb->data; if (!tkey->tx_phase1_done) { tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2, tkey->tx_iv32); @@ -325,10 +340,20 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv) struct scatterlist sg; int plen; + hdr = (struct ieee80211_hdr *)skb->data; + + if (tkey->ieee->tkip_countermeasures) { + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + "received packet from " MAC_FMT "\n", + tkey->ieee->dev->name, MAC_ARG(hdr->addr2)); + } + return -1; + } + if (skb->len < hdr_len + 8 + 4) return -1; - hdr = (struct ieee80211_hdr *)skb->data; pos = skb->data + hdr_len; keyidx = pos[3]; if (!(keyidx & (1 << 5))) { diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c index ebe16155e792..63e783fa5173 100644 --- a/net/ieee80211/ieee80211_crypt_wep.c +++ b/net/ieee80211/ieee80211_crypt_wep.c @@ -37,7 +37,7 @@ struct prism2_wep_data { struct crypto_tfm *tfm; }; -static void *prism2_wep_init(int keyidx) +static void *prism2_wep_init(struct ieee80211_device *ieee, int keyidx) { struct prism2_wep_data *priv; diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index e0337c8fcde8..9a125d45289a 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -280,17 +280,6 @@ ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb, hdr = (struct ieee80211_hdr *)skb->data; hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); -#ifdef CONFIG_IEEE80211_CRYPT_TKIP - if (ieee->tkip_countermeasures && strcmp(crypt->ops->name, "TKIP") == 0) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " - "received packet from " MAC_FMT "\n", - ieee->dev->name, MAC_ARG(hdr->addr2)); - } - return -1; - } -#endif - atomic_inc(&crypt->refcnt); res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv); atomic_dec(&crypt->refcnt); diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 1a09448016ed..435ef5a73d75 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -157,20 +157,6 @@ static inline int ieee80211_encrypt_fragment(struct ieee80211_device *ieee, struct ieee80211_crypt_data *crypt = ieee->crypt[ieee->tx_keyidx]; int res; -#ifdef CONFIG_IEEE80211_CRYPT_TKIP - struct ieee80211_hdr *header; - - if (ieee->tkip_countermeasures && - crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) { - header = (struct ieee80211_hdr *)frag->data; - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " - "TX packet to " MAC_FMT "\n", - ieee->dev->name, MAC_ARG(header->addr1)); - } - return -1; - } -#endif /* To encrypt, frame format is: * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */ diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index 04f0897b0653..fc4e1377aba7 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -182,7 +182,7 @@ static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee, if (iwe.u.data.length) start = iwe_stream_add_point(start, stop, &iwe, custom); - if (ieee->wpa_enabled && network->wpa_ie_len) { + if (network->wpa_ie_len) { char buf[MAX_WPA_IE_LEN * 2 + 30]; u8 *p = buf; @@ -197,7 +197,7 @@ static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee, start = iwe_stream_add_point(start, stop, &iwe, buf); } - if (ieee->wpa_enabled && network->rsn_ie_len) { + if (network->rsn_ie_len) { char buf[MAX_WPA_IE_LEN * 2 + 30]; u8 *p = buf; @@ -351,7 +351,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, } if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) - new_crypt->priv = new_crypt->ops->init(key); + new_crypt->priv = new_crypt->ops->init(ieee, key); if (!new_crypt->ops || !new_crypt->priv) { kfree(new_crypt); -- GitLab From f1bf6638af9e9bbbb6fb0b769054fb7db1ae652f Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:53:54 -0500 Subject: [PATCH 0068/1519] [PATCH] ieee80211: Hardware crypto and fragmentation offload support tree 5322d496af90d03ffbec27292dc1a6268a746ede parent 6c9364386ccb786e4a84427ab3ad712f0b7b8904 author James Ketrenos 1124432367 -0500 committer James Ketrenos 1127311810 -0500 Hardware crypto and fragmentation offload support added (Zhu Yi) Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 46 ++++++++++++++++++--------------- net/ieee80211/ieee80211_tx.c | 27 ++++++++++++++----- net/ieee80211/ieee80211_wx.c | 50 +++++++++++++++++++++--------------- 3 files changed, 75 insertions(+), 48 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index ed06a9454edc..fa14360dbc9d 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -430,31 +430,34 @@ struct ieee80211_device; #include "ieee80211_crypt.h" -#define SEC_KEY_1 (1<<0) -#define SEC_KEY_2 (1<<1) -#define SEC_KEY_3 (1<<2) -#define SEC_KEY_4 (1<<3) -#define SEC_KEY_MASK (SEC_KEY_1 | SEC_KEY_2 | SEC_KEY_3 | SEC_KEY_4) -#define SEC_ACTIVE_KEY (1<<4) -#define SEC_AUTH_MODE (1<<5) -#define SEC_UNICAST_GROUP (1<<6) -#define SEC_LEVEL (1<<7) -#define SEC_ENABLED (1<<8) - -#define SEC_LEVEL_0 0 /* None */ -#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ -#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ -#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ -#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ - -#define WEP_KEYS 4 -#define WEP_KEY_LEN 13 +#define SEC_KEY_1 (1<<0) +#define SEC_KEY_2 (1<<1) +#define SEC_KEY_3 (1<<2) +#define SEC_KEY_4 (1<<3) +#define SEC_ACTIVE_KEY (1<<4) +#define SEC_AUTH_MODE (1<<5) +#define SEC_UNICAST_GROUP (1<<6) +#define SEC_LEVEL (1<<7) +#define SEC_ENABLED (1<<8) +#define SEC_TGI_KEY_RESET (1<<9) + +#define SEC_LEVEL_0 0 /* None */ +#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ +#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ +#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ +#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ + +#define WEP_KEYS 4 +#define WEP_KEY_LEN 13 +#define SCM_KEY_LEN 32 +#define SCM_TEMPORAL_KEY_LENGTH 16 struct ieee80211_security { u16 active_key:2, - enabled:1, auth_mode:2, auth_algo:4, unicast_uses_group:1; + enabled:1, + auth_mode:2, auth_algo:4, unicast_uses_group:1, encrypt:1; u8 key_sizes[WEP_KEYS]; - u8 keys[WEP_KEYS][WEP_KEY_LEN]; + u8 keys[WEP_KEYS][SCM_KEY_LEN]; u8 level; u16 flags; } __attribute__ ((packed)); @@ -636,6 +639,7 @@ enum ieee80211_state { struct ieee80211_device { struct net_device *dev; + struct ieee80211_security sec; /* Bookkeeping structures */ struct net_device_stats stats; diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 435ef5a73d75..785e76f7e4e9 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -231,7 +231,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size; unsigned long flags; struct net_device_stats *stats = &ieee->stats; - int ether_type, encrypt; + int ether_type, encrypt, host_encrypt; int bytes, fc, hdr_len; struct sk_buff *skb_frag; struct ieee80211_hdr header = { /* Ensure zero initialized */ @@ -262,7 +262,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) crypt = ieee->crypt[ieee->tx_keyidx]; encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) && - ieee->host_encrypt && crypt && crypt->ops; + ieee->sec.encrypt; + host_encrypt = ieee->host_encrypt && encrypt; if (!encrypt && ieee->ieee802_1x && ieee->drop_unencrypted && ether_type != ETH_P_PAE) { @@ -280,7 +281,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) /* Determine total amount of storage required for TXB packets */ bytes = skb->len + SNAP_SIZE + sizeof(u16); - if (encrypt) + if (host_encrypt) fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA | IEEE80211_FCTL_PROTECTED; else @@ -320,7 +321,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) bytes_per_frag -= IEEE80211_FCS_LEN; /* Each fragment may need to have room for encryptiong pre/postfix */ - if (encrypt) + if (host_encrypt) bytes_per_frag -= crypt->ops->extra_prefix_len + crypt->ops->extra_postfix_len; @@ -348,7 +349,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) for (i = 0; i < nr_frags; i++) { skb_frag = txb->fragments[i]; - if (encrypt) + if (host_encrypt) skb_reserve(skb_frag, crypt->ops->extra_prefix_len); frag_hdr = (struct ieee80211_hdr *)skb_put(skb_frag, hdr_len); @@ -380,8 +381,22 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) /* Encryption routine will move the header forward in order * to insert the IV between the header and the payload */ - if (encrypt) + if (host_encrypt) ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len); + + /* ipw2200/2915 Hardware encryption doesn't support TKIP MIC */ + if (!ieee->host_encrypt && encrypt && + (ieee->sec.level == SEC_LEVEL_2) && + crypt && crypt->ops && crypt->ops->encrypt_msdu) { + int res = 0; + res = crypt->ops->encrypt_msdu(skb_frag, hdr_len, + crypt->priv); + if (res < 0) { + IEEE80211_ERROR("TKIP MIC encryption failed\n"); + goto failed; + } + } + if (ieee->config & (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) skb_put(skb_frag, 4); diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index fc4e1377aba7..f88c8116a23c 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -278,6 +278,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, }; int i, key, key_provided, len; struct ieee80211_crypt_data **crypt; + int host_crypto = ieee->host_encrypt || ieee->host_decrypt; IEEE80211_DEBUG_WX("SET_ENCODE\n"); @@ -318,6 +319,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, if (i == WEP_KEYS) { sec.enabled = 0; + sec.encrypt = 0; sec.level = SEC_LEVEL_0; sec.flags |= SEC_ENABLED | SEC_LEVEL; } @@ -326,6 +328,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, } sec.enabled = 1; + sec.encrypt = 1; sec.flags |= SEC_ENABLED; if (*crypt != NULL && (*crypt)->ops != NULL && @@ -335,7 +338,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, ieee80211_crypt_delayed_deinit(ieee, crypt); } - if (*crypt == NULL) { + if (*crypt == NULL && host_crypto) { struct ieee80211_crypt_data *new_crypt; /* take WEP into use */ @@ -375,31 +378,34 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, key, escape_essid(sec.keys[key], len), erq->length, len); sec.key_sizes[key] = len; - (*crypt)->ops->set_key(sec.keys[key], len, NULL, - (*crypt)->priv); + if (*crypt) + (*crypt)->ops->set_key(sec.keys[key], len, NULL, + (*crypt)->priv); sec.flags |= (1 << key); /* This ensures a key will be activated if no key is * explicitely set */ if (key == sec.active_key) sec.flags |= SEC_ACTIVE_KEY; + } else { - len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN, - NULL, (*crypt)->priv); - if (len == 0) { - /* Set a default key of all 0 */ - IEEE80211_DEBUG_WX("Setting key %d to all zero.\n", - key); - memset(sec.keys[key], 0, 13); - (*crypt)->ops->set_key(sec.keys[key], 13, NULL, - (*crypt)->priv); - sec.key_sizes[key] = 13; - sec.flags |= (1 << key); + if (host_crypto) { + len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN, + NULL, (*crypt)->priv); + if (len == 0) { + /* Set a default key of all 0 */ + IEEE80211_DEBUG_WX("Setting key %d to all " + "zero.\n", key); + memset(sec.keys[key], 0, 13); + (*crypt)->ops->set_key(sec.keys[key], 13, NULL, + (*crypt)->priv); + sec.key_sizes[key] = 13; + sec.flags |= (1 << key); + } } - /* No key data - just set the default TX key index */ if (key_provided) { - IEEE80211_DEBUG_WX - ("Setting key %d to default Tx key.\n", key); + IEEE80211_DEBUG_WX("Setting key %d to default Tx " + "key.\n", key); ieee->tx_keyidx = key; sec.active_key = key; sec.flags |= SEC_ACTIVE_KEY; @@ -442,6 +448,7 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee, struct iw_point *erq = &(wrqu->encoding); int len, key; struct ieee80211_crypt_data *crypt; + struct ieee80211_security *sec = &ieee->sec; IEEE80211_DEBUG_WX("GET_ENCODE\n"); @@ -456,13 +463,13 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee, crypt = ieee->crypt[key]; erq->flags = key + 1; - if (crypt == NULL || crypt->ops == NULL) { + if (!sec->enabled) { erq->length = 0; erq->flags |= IW_ENCODE_DISABLED; return 0; } - if (strcmp(crypt->ops->name, "WEP") != 0) { + if (sec->level != SEC_LEVEL_1) { /* only WEP is supported with wireless extensions, so just * report that encryption is used */ erq->length = 0; @@ -470,9 +477,10 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee, return 0; } - len = crypt->ops->get_key(keybuf, WEP_KEY_LEN, NULL, crypt->priv); - erq->length = (len >= 0 ? len : 0); + len = sec->key_sizes[key]; + memcpy(keybuf, sec->keys[key], len); + erq->length = (len >= 0 ? len : 0); erq->flags |= IW_ENCODE_ENABLED; if (ieee->open_wep) -- GitLab From 42e349fd10d471d9ae6955a7f12523291c0193e6 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:54:07 -0500 Subject: [PATCH 0069/1519] [PATCH] ieee80211: Fix time calculation, switching to use jiffies_to_msecs tree b9cdd7058b787807655ea6f125e2adbf8d26c863 parent 85d9b2bddfcf3ed2eb4d061947c25c6a832891ab author Zhu Yi 1124435212 -0500 committer James Ketrenos 1127312152 -0500 Fix time calculation, switching to use jiffies_to_msecs. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_wx.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index f88c8116a23c..df64bf3716b7 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -32,6 +32,7 @@ #include #include +#include #include #include @@ -217,8 +218,8 @@ static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee, iwe.cmd = IWEVCUSTOM; p = custom; p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), - " Last beacon: %lums ago", - (jiffies - network->last_scanned) / (HZ / 100)); + " Last beacon: %dms ago", + jiffies_to_msecs(jiffies - network->last_scanned)); iwe.u.data.length = p - custom; if (iwe.u.data.length) start = iwe_stream_add_point(start, stop, &iwe, custom); @@ -248,13 +249,13 @@ int ieee80211_wx_get_scan(struct ieee80211_device *ieee, ev = ipw2100_translate_scan(ieee, ev, stop, network); else IEEE80211_DEBUG_SCAN("Not showing network '%s (" - MAC_FMT ")' due to age (%lums).\n", + MAC_FMT ")' due to age (%dms).\n", escape_essid(network->ssid, network->ssid_len), MAC_ARG(network->bssid), - (jiffies - - network->last_scanned) / (HZ / - 100)); + jiffies_to_msecs(jiffies - + network-> + last_scanned)); } spin_unlock_irqrestore(&ieee->lock, flags); -- GitLab From 0ad0c3c64484b1458b51167bd3e614d8d9d070f8 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:54:15 -0500 Subject: [PATCH 0070/1519] [PATCH] ieee80211: Fix kernel Oops when module unload tree b69e983266840983183a00f5ac02c66d5270ca47 parent cdd6372949b76694622ed74fe36e1dd17a92eb71 author Zhu Yi 1124435425 -0500 committer James Ketrenos 1127312421 -0500 Fix kernel Oops when module unload. Export a new function ieee80211_crypt_quiescing from ieee80211. Device drivers call it to make the host crypto stack enter the quiescence state, which means "process existing requests, but don't accept new ones". This is usually called during a driver's host crypto data structure free (module unload) path. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 1 + include/net/ieee80211_crypt.h | 1 + net/ieee80211/ieee80211_crypt.c | 33 ++++++++++++++++++++++++++------ net/ieee80211/ieee80211_module.c | 2 ++ 4 files changed, 31 insertions(+), 6 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index fa14360dbc9d..6cc0674e5606 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -684,6 +684,7 @@ struct ieee80211_device { struct ieee80211_crypt_data *crypt[WEP_KEYS]; int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ struct timer_list crypt_deinit_timer; + int crypt_quiesced; int bcrx_sta_key; /* use individual keys to override default keys even * with RX of broad/multicast frames */ diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index e2064edb957d..536e9a9e6718 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -82,5 +82,6 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int); void ieee80211_crypt_deinit_handler(unsigned long); void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee, struct ieee80211_crypt_data **crypt); +void ieee80211_crypt_quiescing(struct ieee80211_device *ieee); #endif diff --git a/net/ieee80211/ieee80211_crypt.c b/net/ieee80211/ieee80211_crypt.c index 0c366299db0f..60d3166facce 100644 --- a/net/ieee80211/ieee80211_crypt.c +++ b/net/ieee80211/ieee80211_crypt.c @@ -44,6 +44,10 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, int force) unsigned long flags; spin_lock_irqsave(&ieee->lock, flags); + + if (list_empty(&ieee->crypt_deinit_list)) + goto unlock; + for (ptr = ieee->crypt_deinit_list.next, n = ptr->next; ptr != &ieee->crypt_deinit_list; ptr = n, n = ptr->next) { entry = list_entry(ptr, struct ieee80211_crypt_data, list); @@ -59,21 +63,35 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, int force) } kfree(entry); } + unlock: + spin_unlock_irqrestore(&ieee->lock, flags); +} + +/* After this, crypt_deinit_list won't accept new members */ +void ieee80211_crypt_quiescing(struct ieee80211_device *ieee) +{ + unsigned long flags; + + spin_lock_irqsave(&ieee->lock, flags); + ieee->crypt_quiesced = 1; spin_unlock_irqrestore(&ieee->lock, flags); } void ieee80211_crypt_deinit_handler(unsigned long data) { struct ieee80211_device *ieee = (struct ieee80211_device *)data; + unsigned long flags; ieee80211_crypt_deinit_entries(ieee, 0); - if (!list_empty(&ieee->crypt_deinit_list)) { + + spin_lock_irqsave(&ieee->lock, flags); + if (!list_empty(&ieee->crypt_deinit_list) && !ieee->crypt_quiesced) { printk(KERN_DEBUG "%s: entries remaining in delayed crypt " "deletion list\n", ieee->dev->name); ieee->crypt_deinit_timer.expires = jiffies + HZ; add_timer(&ieee->crypt_deinit_timer); } - + spin_unlock_irqrestore(&ieee->lock, flags); } void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee, @@ -93,10 +111,12 @@ void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee, * locking. */ spin_lock_irqsave(&ieee->lock, flags); - list_add(&tmp->list, &ieee->crypt_deinit_list); - if (!timer_pending(&ieee->crypt_deinit_timer)) { - ieee->crypt_deinit_timer.expires = jiffies + HZ; - add_timer(&ieee->crypt_deinit_timer); + if (!ieee->crypt_quiesced) { + list_add(&tmp->list, &ieee->crypt_deinit_list); + if (!timer_pending(&ieee->crypt_deinit_timer)) { + ieee->crypt_deinit_timer.expires = jiffies + HZ; + add_timer(&ieee->crypt_deinit_timer); + } } spin_unlock_irqrestore(&ieee->lock, flags); } @@ -250,6 +270,7 @@ static void __exit ieee80211_crypto_deinit(void) EXPORT_SYMBOL(ieee80211_crypt_deinit_entries); EXPORT_SYMBOL(ieee80211_crypt_deinit_handler); EXPORT_SYMBOL(ieee80211_crypt_delayed_deinit); +EXPORT_SYMBOL(ieee80211_crypt_quiescing); EXPORT_SYMBOL(ieee80211_register_crypto_ops); EXPORT_SYMBOL(ieee80211_unregister_crypto_ops); diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 4b43ae1235f9..82a4fd713b28 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -138,6 +138,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) init_timer(&ieee->crypt_deinit_timer); ieee->crypt_deinit_timer.data = (unsigned long)ieee; ieee->crypt_deinit_timer.function = ieee80211_crypt_deinit_handler; + ieee->crypt_quiesced = 0; spin_lock_init(&ieee->lock); @@ -161,6 +162,7 @@ void free_ieee80211(struct net_device *dev) int i; + ieee80211_crypt_quiescing(ieee); del_timer_sync(&ieee->crypt_deinit_timer); ieee80211_crypt_deinit_entries(ieee, 1); -- GitLab From 259bf1fd8a7cc0f6b47fd8a9ac5e2dfc33182a3d Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:54:22 -0500 Subject: [PATCH 0071/1519] [PATCH] ieee80211: Allow drivers to fix an issue when using wpa_supplicant with WEP tree 898fedef6ca1b5b58b8bdf7e6d8894a78bbde4cd parent 8720fff53090ae428d2159332b6f4b2749dea10f author Zhu Yi 1124435746 -0500 committer James Ketrenos 1127312509 -0500 Allow drivers to fix an issue when using wpa_supplicant with WEP. The problem is introduced by the hwcrypto patch. We changed indicator of the encryption request from the upper layer (i.e. wpa_supplicant): In the original host based crypto the driver could use: crypt && crypt->ops. In the new hardware based crypto, the driver should use the flags specified in ieee->sec.encrypt. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 2 +- net/ieee80211/ieee80211_wx.c | 7 +++---- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 6cc0674e5606..c7ab7cd9de13 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -439,7 +439,7 @@ struct ieee80211_device; #define SEC_UNICAST_GROUP (1<<6) #define SEC_LEVEL (1<<7) #define SEC_ENABLED (1<<8) -#define SEC_TGI_KEY_RESET (1<<9) +#define SEC_ENCRYPT (1<<9) #define SEC_LEVEL_0 0 /* None */ #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index df64bf3716b7..49afea7989d0 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -322,7 +322,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, sec.enabled = 0; sec.encrypt = 0; sec.level = SEC_LEVEL_0; - sec.flags |= SEC_ENABLED | SEC_LEVEL; + sec.flags |= SEC_ENABLED | SEC_LEVEL | SEC_ENCRYPT; } goto done; @@ -330,7 +330,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, sec.enabled = 1; sec.encrypt = 1; - sec.flags |= SEC_ENABLED; + sec.flags |= SEC_ENABLED | SEC_ENCRYPT; if (*crypt != NULL && (*crypt)->ops != NULL && strcmp((*crypt)->ops->name, "WEP") != 0) { @@ -412,8 +412,6 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, sec.flags |= SEC_ACTIVE_KEY; } } - - done: ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED); sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY; sec.flags |= SEC_AUTH_MODE; @@ -425,6 +423,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, sec.flags |= SEC_LEVEL; sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */ + done: if (ieee->set_security) ieee->set_security(dev, &sec); -- GitLab From e0d369d1d969fc9e4fd08a20f6dad04d369aceea Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:54:30 -0500 Subject: [PATCH 0072/1519] [PATCH] ieee82011: Added WE-18 support to default wireless extension handler tree 1536f39c18756698d033da72c49300a561be1289 parent 07172d7c9f10ee3d05d6f6489ba6d6ee2628da06 author Liu Hong 1124436225 -0500 committer James Ketrenos 1127312664 -0500 Added WE-18 support to default wireless extension handler in ieee80211 subsystem. Updated patch since last send to account for ieee80211_device parameter being added to the crypto init method. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 14 +++ net/ieee80211/ieee80211_wx.c | 238 +++++++++++++++++++++++++++++++++-- 2 files changed, 244 insertions(+), 8 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index c7ab7cd9de13..dfc5d65cc6c1 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -447,6 +447,11 @@ struct ieee80211_device; #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ #define SEC_LEVEL_3 4 /* Level 2 + CCMP */ +#define SEC_ALG_NONE 0 +#define SEC_ALG_WEP 1 +#define SEC_ALG_TKIP 2 +#define SEC_ALG_CCMP 3 + #define WEP_KEYS 4 #define WEP_KEY_LEN 13 #define SCM_KEY_LEN 32 @@ -456,6 +461,7 @@ struct ieee80211_security { u16 active_key:2, enabled:1, auth_mode:2, auth_algo:4, unicast_uses_group:1, encrypt:1; + u8 encode_alg[WEP_KEYS]; u8 key_sizes[WEP_KEYS]; u8 keys[WEP_KEYS][SCM_KEY_LEN]; u8 level; @@ -824,6 +830,14 @@ extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee, extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *key); +#if WIRELESS_EXT > 17 +extern int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); +extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); +#endif extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee) { diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index 49afea7989d0..db66217699d5 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -422,6 +422,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, * TODO: When WPA is added this is one place that needs to change */ sec.flags |= SEC_LEVEL; sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */ + sec.encode_alg[key] = SEC_ALG_WEP; done: if (ieee->set_security) @@ -469,14 +470,6 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee, return 0; } - if (sec->level != SEC_LEVEL_1) { - /* only WEP is supported with wireless extensions, so just - * report that encryption is used */ - erq->length = 0; - erq->flags |= IW_ENCODE_ENABLED; - return 0; - } - len = sec->key_sizes[key]; memcpy(keybuf, sec->keys[key], len); @@ -491,6 +484,235 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee, return 0; } +#if WIRELESS_EXT > 17 +int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct net_device *dev = ieee->dev; + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int i, idx, ret = 0; + const char *alg, *module; + struct ieee80211_crypto_ops *ops; + struct ieee80211_crypt_data **crypt; + + struct ieee80211_security sec = { + .flags = 0, + }; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if (idx < 1 || idx > WEP_KEYS) + return -EINVAL; + idx--; + } else + idx = ieee->tx_keyidx; + + if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) + crypt = &ieee->crypt[idx]; + else { + if (idx != 0) + return -EINVAL; + if (ieee->iw_mode == IW_MODE_INFRA) + crypt = &ieee->crypt[idx]; + else + return -EINVAL; + } + + sec.flags |= SEC_ENABLED | SEC_ENCRYPT; + if ((encoding->flags & IW_ENCODE_DISABLED) || + ext->alg == IW_ENCODE_ALG_NONE) { + if (*crypt) + ieee80211_crypt_delayed_deinit(ieee, crypt); + + for (i = 0; i < WEP_KEYS; i++) + if (ieee->crypt[i] != NULL) + break; + + if (i == WEP_KEYS) { + sec.enabled = 0; + sec.encrypt = 0; + sec.level = SEC_LEVEL_0; + sec.flags |= SEC_LEVEL; + } + goto done; + } + + sec.enabled = 1; + sec.encrypt = 1; + + if (!(ieee->host_encrypt || ieee->host_decrypt)) + goto skip_host_crypt; + + switch (ext->alg) { + case IW_ENCODE_ALG_WEP: + alg = "WEP"; + module = "ieee80211_crypt_wep"; + break; + case IW_ENCODE_ALG_TKIP: + alg = "TKIP"; + module = "ieee80211_crypt_tkip"; + break; + case IW_ENCODE_ALG_CCMP: + alg = "CCMP"; + module = "ieee80211_crypt_ccmp"; + break; + default: + IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", + dev->name, ext->alg); + ret = -EINVAL; + goto done; + } + + ops = ieee80211_get_crypto_ops(alg); + if (ops == NULL) { + request_module(module); + ops = ieee80211_get_crypto_ops(alg); + } + if (ops == NULL) { + IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", + dev->name, ext->alg); + ret = -EINVAL; + goto done; + } + + if (*crypt == NULL || (*crypt)->ops != ops) { + struct ieee80211_crypt_data *new_crypt; + + ieee80211_crypt_delayed_deinit(ieee, crypt); + + new_crypt = (struct ieee80211_crypt_data *) + kmalloc(sizeof(*new_crypt), GFP_KERNEL); + if (new_crypt == NULL) { + ret = -ENOMEM; + goto done; + } + memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); + new_crypt->ops = ops; + if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + new_crypt->priv = new_crypt->ops->init(ieee, idx); + if (new_crypt->priv == NULL) { + kfree(new_crypt); + ret = -EINVAL; + goto done; + } + *crypt = new_crypt; + } + + if (ext->key_len > 0 && (*crypt)->ops->set_key && + (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, + (*crypt)->priv) < 0) { + IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name); + ret = -EINVAL; + goto done; + } + + skip_host_crypt: + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + ieee->tx_keyidx = idx; + sec.active_key = idx; + sec.flags |= SEC_ACTIVE_KEY; + } + + if (ext->alg != IW_ENCODE_ALG_NONE) { + memcpy(sec.keys[idx], ext->key, ext->key_len); + sec.key_sizes[idx] = ext->key_len; + sec.flags |= (1 << idx); + if (ext->alg == IW_ENCODE_ALG_WEP) { + sec.encode_alg[idx] = SEC_ALG_WEP; + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_1; + } else if (ext->alg == IW_ENCODE_ALG_TKIP) { + sec.encode_alg[idx] = SEC_ALG_TKIP; + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_2; + } else if (ext->alg == IW_ENCODE_ALG_CCMP) { + sec.encode_alg[idx] = SEC_ALG_CCMP; + sec.flags |= SEC_LEVEL; + sec.level = SEC_LEVEL_3; + } + } + done: + if (ieee->set_security) + ieee->set_security(ieee->dev, &sec); + + /* + * Do not reset port if card is in Managed mode since resetting will + * generate new IEEE 802.11 authentication which may end up in looping + * with IEEE 802.1X. If your hardware requires a reset after WEP + * configuration (for example... Prism2), implement the reset_port in + * the callbacks structures used to initialize the 802.11 stack. + */ + if (ieee->reset_on_keychange && + ieee->iw_mode != IW_MODE_INFRA && + ieee->reset_port && ieee->reset_port(dev)) { + IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name); + return -EINVAL; + } + + return ret; +} + +int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + struct ieee80211_security *sec = &ieee->sec; + int idx, max_key_len; + + max_key_len = encoding->length - sizeof(*ext); + if (max_key_len < 0) + return -EINVAL; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if (idx < 1 || idx > WEP_KEYS) + return -EINVAL; + idx--; + } else + idx = ieee->tx_keyidx; + + if (!ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) + if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA) + return -EINVAL; + + encoding->flags = idx + 1; + memset(ext, 0, sizeof(*ext)); + + if (!sec->enabled) { + ext->alg = IW_ENCODE_ALG_NONE; + ext->key_len = 0; + encoding->flags |= IW_ENCODE_DISABLED; + } else { + if (sec->encode_alg[idx] == SEC_ALG_WEP) + ext->alg = IW_ENCODE_ALG_WEP; + else if (sec->encode_alg[idx] == SEC_ALG_TKIP) + ext->alg = IW_ENCODE_ALG_TKIP; + else if (sec->encode_alg[idx] == SEC_ALG_CCMP) + ext->alg = IW_ENCODE_ALG_CCMP; + else + return -EINVAL; + + ext->key_len = sec->key_sizes[idx]; + memcpy(ext->key, sec->keys[idx], ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + if (ext->key_len && + (ext->alg == IW_ENCODE_ALG_TKIP || + ext->alg == IW_ENCODE_ALG_CCMP)) + ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; + + } + + return 0; +} + +EXPORT_SYMBOL(ieee80211_wx_set_encodeext); +EXPORT_SYMBOL(ieee80211_wx_get_encodeext); +#endif + EXPORT_SYMBOL(ieee80211_wx_get_scan); EXPORT_SYMBOL(ieee80211_wx_set_encode); EXPORT_SYMBOL(ieee80211_wx_get_encode); -- GitLab From ee34af37c095482b9dba254b9cd7cb5e65e9a25e Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:54:36 -0500 Subject: [PATCH 0073/1519] [PATCH] ieee80211: Renamed ieee80211_hdr to ieee80211_hdr_3addr tree e9c18b2c8e5ad446a4d213243c2dcf9fd1652a7b parent 4e97ad6ae7084a4f741e94e76c41c68bc7c5a76a author James Ketrenos 1124444315 -0500 committer James Ketrenos 1127312922 -0500 Renamed ieee80211_hdr to ieee80211_hdr_3addr and modified ieee80211_hdr to just contain the frame_ctrl and duration_id. Changed uses of ieee80211_hdr to ieee80211_hdr_4addr or ieee80211_hdr_3addr based on what was expected for that portion of code. NOTE: This requires changes to ipw2100, ipw2200, hostap, and atmel drivers. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 117 ++++++++++++++++++++------- net/ieee80211/ieee80211_crypt_ccmp.c | 10 +-- net/ieee80211/ieee80211_crypt_tkip.c | 27 ++++--- net/ieee80211/ieee80211_rx.c | 32 ++++---- net/ieee80211/ieee80211_tx.c | 7 +- 5 files changed, 129 insertions(+), 64 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index dfc5d65cc6c1..ebe7e41e5eaf 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -33,33 +33,13 @@ represents the 2304 bytes of real data, plus a possible 8 bytes of WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ -#define IEEE80211_HLEN 30 -#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) - -struct ieee80211_hdr { - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - __le16 seq_ctl; - u8 addr4[ETH_ALEN]; -} __attribute__ ((packed)); - -struct ieee80211_hdr_3addr { - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - __le16 seq_ctl; -} __attribute__ ((packed)); - #define IEEE80211_1ADDR_LEN 10 #define IEEE80211_2ADDR_LEN 16 #define IEEE80211_3ADDR_LEN 24 #define IEEE80211_4ADDR_LEN 30 #define IEEE80211_FCS_LEN 4 +#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) #define MIN_FRAG_THRESHOLD 256U #define MAX_FRAG_THRESHOLD 2346U @@ -515,6 +495,51 @@ enum ieee80211_mfie { MFIE_TYPE_GENERIC = 221, }; +/* Minimal header; can be used for passing 802.11 frames with sufficient + * information to determine what type of underlying data type is actually + * stored in the data. */ +struct ieee80211_hdr { + u16 frame_ctl; + u16 duration_id; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_1addr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_2addr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_3addr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_4addr { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; + u8 payload[0]; +} __attribute__ ((packed)); + struct ieee80211_info_element { u8 id; u8 len; @@ -538,7 +563,7 @@ struct ieee80211_info_element { u16 status; */ -struct ieee80211_authentication { +struct ieee80211_auth { struct ieee80211_hdr_3addr header; __le16 algorithm; __le16 transaction; @@ -546,6 +571,17 @@ struct ieee80211_authentication { struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); +struct ieee80211_disassoc { + struct ieee80211_hdr_3addr header; + u16 reason_code; + struct ieee80211_info_element info_element[0]; +} __attribute__ ((packed)); + +struct ieee80211_probe_request { + struct ieee80211_hdr_3addr header; + struct ieee80211_info_element info_element[0]; +} __attribute__ ((packed)); + struct ieee80211_probe_response { struct ieee80211_hdr_3addr header; u32 time_stamp[2]; @@ -554,14 +590,25 @@ struct ieee80211_probe_response { struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); -struct ieee80211_assoc_request_frame { +/* Alias beacon for probe_response */ +#define ieee80211_beacon ieee80211_probe_response + +struct ieee80211_assoc_request { + struct ieee80211_hdr_3addr header; + u16 capability; + u16 listen_interval; + struct ieee80211_info_element info_element[0]; +} __attribute__ ((packed)); + +struct ieee80211_reassoc_request { + struct ieee80211_hdr_3addr header; __le16 capability; __le16 listen_interval; u8 current_ap[ETH_ALEN]; struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); -struct ieee80211_assoc_response_frame { +struct ieee80211_assoc_response { struct ieee80211_hdr_3addr header; __le16 capability; __le16 status; @@ -572,7 +619,8 @@ struct ieee80211_assoc_response_frame { struct ieee80211_txb { u8 nr_frags; u8 encrypted; - u16 reserved; + u8 rts_included; + u8 reserved; u16 frag_size; u16 payload_size; struct sk_buff *fragments[0]; @@ -803,6 +851,21 @@ extern inline int ieee80211_get_hdrlen(u16 fc) return hdrlen; } +extern inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr) +{ + switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) { + case IEEE80211_1ADDR_LEN: + return ((struct ieee80211_hdr_1addr *)hdr)->payload; + case IEEE80211_2ADDR_LEN: + return ((struct ieee80211_hdr_2addr *)hdr)->payload; + case IEEE80211_3ADDR_LEN: + return ((struct ieee80211_hdr_3addr *)hdr)->payload; + case IEEE80211_4ADDR_LEN: + return ((struct ieee80211_hdr_4addr *)hdr)->payload; + } + +} + /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev); extern struct net_device *alloc_ieee80211(int sizeof_priv); @@ -817,7 +880,7 @@ extern void ieee80211_txb_free(struct ieee80211_txb *); extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, - struct ieee80211_hdr *header, + struct ieee80211_hdr_4addr *header, struct ieee80211_rx_stats *stats); /* ieee80211_wx.c */ diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c index 1e6644b133dc..d3b5cdee69ef 100644 --- a/net/ieee80211/ieee80211_crypt_ccmp.c +++ b/net/ieee80211/ieee80211_crypt_ccmp.c @@ -119,7 +119,7 @@ static inline void xor_block(u8 * b, u8 * a, size_t len) } static void ccmp_init_blocks(struct crypto_tfm *tfm, - struct ieee80211_hdr *hdr, + struct ieee80211_hdr_4addr *hdr, u8 * pn, size_t dlen, u8 * b0, u8 * auth, u8 * s0) { u8 *pos, qc = 0; @@ -196,7 +196,7 @@ static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv) struct ieee80211_ccmp_data *key = priv; int data_len, i, blocks, last, len; u8 *pos, *mic; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u8 *b0 = key->tx_b0; u8 *b = key->tx_b; u8 *e = key->tx_e; @@ -229,7 +229,7 @@ static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv) *pos++ = key->tx_pn[1]; *pos++ = key->tx_pn[0]; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_4addr *)skb->data; ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0); blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN; @@ -258,7 +258,7 @@ static int ieee80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv) { struct ieee80211_ccmp_data *key = priv; u8 keyidx, *pos; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u8 *b0 = key->rx_b0; u8 *b = key->rx_b; u8 *a = key->rx_a; @@ -272,7 +272,7 @@ static int ieee80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv) return -1; } - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_4addr *)skb->data; pos = skb->data + hdr_len; keyidx = pos[3]; if (!(keyidx & (1 << 5))) { diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c index 0c495f07e718..f091aacd4297 100644 --- a/net/ieee80211/ieee80211_crypt_tkip.c +++ b/net/ieee80211/ieee80211_crypt_tkip.c @@ -265,11 +265,11 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) struct ieee80211_tkip_data *tkey = priv; int len; u8 rc4key[16], *pos, *icv; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u32 crc; struct scatterlist sg; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_4addr *)skb->data; if (tkey->ieee->tkip_countermeasures) { if (net_ratelimit()) { @@ -334,13 +334,13 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv) u8 keyidx, *pos; u32 iv32; u16 iv16; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u8 icv[4]; u32 crc; struct scatterlist sg; int plen; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_4addr *)skb->data; if (tkey->ieee->tkip_countermeasures) { if (net_ratelimit()) { @@ -466,9 +466,9 @@ static int michael_mic(struct ieee80211_tkip_data *tkey, u8 * key, u8 * hdr, static void michael_mic_hdr(struct sk_buff *skb, u8 * hdr) { - struct ieee80211_hdr *hdr11; + struct ieee80211_hdr_4addr *hdr11; - hdr11 = (struct ieee80211_hdr *)skb->data; + hdr11 = (struct ieee80211_hdr_4addr *)skb->data; switch (le16_to_cpu(hdr11->frame_ctl) & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) { case IEEE80211_FCTL_TODS: @@ -517,7 +517,8 @@ static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len, #if WIRELESS_EXT >= 18 static void ieee80211_michael_mic_failure(struct net_device *dev, - struct ieee80211_hdr *hdr, int keyidx) + struct ieee80211_hdr_4addr *hdr, + int keyidx) { union iwreq_data wrqu; struct iw_michaelmicfailure ev; @@ -537,7 +538,8 @@ static void ieee80211_michael_mic_failure(struct net_device *dev, } #elif WIRELESS_EXT >= 15 static void ieee80211_michael_mic_failure(struct net_device *dev, - struct ieee80211_hdr *hdr, int keyidx) + struct ieee80211_hdr_4addr *hdr, + int keyidx) { union iwreq_data wrqu; char buf[128]; @@ -551,9 +553,8 @@ static void ieee80211_michael_mic_failure(struct net_device *dev, wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf); } #else /* WIRELESS_EXT >= 15 */ -static inline void ieee80211_michael_mic_failure(struct net_device *dev, - struct ieee80211_hdr *hdr, - int keyidx) +static inline void ieee80211_michael_mic_failure(struct net_device *dev, struct ieee80211_hdr_4addr + *hdr, int keyidx) { } #endif /* WIRELESS_EXT >= 15 */ @@ -572,8 +573,8 @@ static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx, skb->data + hdr_len, skb->len - 8 - hdr_len, mic)) return -1; if (memcmp(mic, skb->data + skb->len - 8, 8) != 0) { - struct ieee80211_hdr *hdr; - hdr = (struct ieee80211_hdr *)skb->data; + struct ieee80211_hdr_4addr *hdr; + hdr = (struct ieee80211_hdr_4addr *)skb->data; printk(KERN_DEBUG "%s: Michael MIC verification failed for " "MSDU from " MAC_FMT " keyidx=%d\n", skb->dev ? skb->dev->name : "N/A", MAC_ARG(hdr->addr2), diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 9a125d45289a..71d14c7d915c 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -87,7 +87,7 @@ static struct ieee80211_frag_entry *ieee80211_frag_cache_find(struct /* Called only as a tasklet (software IRQ) */ static struct sk_buff *ieee80211_frag_cache_get(struct ieee80211_device *ieee, - struct ieee80211_hdr *hdr) + struct ieee80211_hdr_4addr *hdr) { struct sk_buff *skb = NULL; u16 sc; @@ -101,7 +101,7 @@ static struct sk_buff *ieee80211_frag_cache_get(struct ieee80211_device *ieee, if (frag == 0) { /* Reserve enough space to fit maximum frame length */ skb = dev_alloc_skb(ieee->dev->mtu + - sizeof(struct ieee80211_hdr) + + sizeof(struct ieee80211_hdr_4addr) + 8 /* LLC */ + 2 /* alignment */ + 8 /* WEP */ + ETH_ALEN /* WDS */ ); @@ -138,7 +138,7 @@ static struct sk_buff *ieee80211_frag_cache_get(struct ieee80211_device *ieee, /* Called only as a tasklet (software IRQ) */ static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee, - struct ieee80211_hdr *hdr) + struct ieee80211_hdr_4addr *hdr) { u16 sc; unsigned int seq; @@ -176,7 +176,7 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb, ieee->dev->name); return 0; /* - hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr *) + hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr_4addr *) skb->data);*/ } @@ -232,13 +232,13 @@ static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee, { struct net_device *dev = ieee->dev; u16 fc, ethertype; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_3addr *hdr; u8 *pos; if (skb->len < 24) return 0; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_3addr *)skb->data; fc = le16_to_cpu(hdr->frame_ctl); /* check that the frame is unicast frame to us */ @@ -271,13 +271,13 @@ static inline int ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_crypt_data *crypt) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_3addr *hdr; int res, hdrlen; if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL) return 0; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_3addr *)skb->data; hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); atomic_inc(&crypt->refcnt); @@ -303,13 +303,13 @@ ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee, struct sk_buff *skb, int keyidx, struct ieee80211_crypt_data *crypt) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_3addr *hdr; int res, hdrlen; if (crypt == NULL || crypt->ops->decrypt_msdu == NULL) return 0; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_3addr *)skb->data; hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); atomic_inc(&crypt->refcnt); @@ -332,7 +332,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats) { struct net_device *dev = ieee->dev; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; size_t hdrlen; u16 fc, type, stype, sc; struct net_device_stats *stats; @@ -352,7 +352,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_crypt_data *crypt = NULL; int keyidx = 0; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_4addr *)skb->data; stats = &ieee->stats; if (skb->len < 10) { @@ -552,7 +552,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0) goto rx_dropped; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_4addr *)skb->data; /* skb: hdr + (possibly fragmented) plaintext payload */ // PR: FIXME: hostap has additional conditions in the "if" below: @@ -606,7 +606,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, /* this was the last fragment and the frame will be * delivered, so remove skb from fragment cache */ skb = frag_skb; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_4addr *)skb->data; ieee80211_frag_cache_invalidate(ieee, hdr); } @@ -616,7 +616,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt)) goto rx_dropped; - hdr = (struct ieee80211_hdr *)skb->data; + hdr = (struct ieee80211_hdr_4addr *)skb->data; if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep) { if ( /*ieee->ieee802_1x && */ ieee80211_is_eapol_frame(ieee, skb)) { @@ -1148,7 +1148,7 @@ static inline void ieee80211_process_probe_response(struct ieee80211_device } void ieee80211_rx_mgt(struct ieee80211_device *ieee, - struct ieee80211_hdr *header, + struct ieee80211_hdr_4addr *header, struct ieee80211_rx_stats *stats) { switch (WLAN_FC_GET_STYPE(le16_to_cpu(header->frame_ctl))) { diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 785e76f7e4e9..29770cfefc3d 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -227,14 +227,14 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_device *ieee = netdev_priv(dev); struct ieee80211_txb *txb = NULL; - struct ieee80211_hdr *frag_hdr; + struct ieee80211_hdr_3addr *frag_hdr; int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size; unsigned long flags; struct net_device_stats *stats = &ieee->stats; int ether_type, encrypt, host_encrypt; int bytes, fc, hdr_len; struct sk_buff *skb_frag; - struct ieee80211_hdr header = { /* Ensure zero initialized */ + struct ieee80211_hdr_3addr header = { /* Ensure zero initialized */ .duration_id = 0, .seq_ctl = 0 }; @@ -352,7 +352,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) if (host_encrypt) skb_reserve(skb_frag, crypt->ops->extra_prefix_len); - frag_hdr = (struct ieee80211_hdr *)skb_put(skb_frag, hdr_len); + frag_hdr = + (struct ieee80211_hdr_3addr *)skb_put(skb_frag, hdr_len); memcpy(frag_hdr, &header, hdr_len); /* If this is not the last fragment, then add the MOREFRAGS -- GitLab From 3cdd00c5827621cd0b1bb0665aa62ef9a724297d Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:54:43 -0500 Subject: [PATCH 0074/1519] [PATCH] ieee80211: adds support for the creation of RTS packets tree b45c9c1017fd23216bfbe71e441aed9aa297fc84 parent 04aacdd71e904656a304d923bdcf57ad3bd2b254 author Ivo van Doorn 1124445405 -0500 committer James Ketrenos 1127313029 -0500 This patch adds support for the creation of RTS packets when the config flag CFG_IEEE80211_RTS has been set. Signed-Off-By: Ivo van Doorn Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 2 ++ net/ieee80211/ieee80211_module.c | 1 + net/ieee80211/ieee80211_tx.c | 41 +++++++++++++++++++++++++++++--- 3 files changed, 41 insertions(+), 3 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index ebe7e41e5eaf..5e11ccf8a763 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -690,6 +690,7 @@ enum ieee80211_state { #define CFG_IEEE80211_RESERVE_FCS (1<<0) #define CFG_IEEE80211_COMPUTE_FCS (1<<1) +#define CFG_IEEE80211_RTS (1<<2) struct ieee80211_device { struct net_device *dev; @@ -747,6 +748,7 @@ struct ieee80211_device { struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN]; unsigned int frag_next_idx; u16 fts; /* Fragmentation Threshold */ + u16 rts; /* RTS threshold */ /* Association info */ u8 bssid[ETH_ALEN]; diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 82a4fd713b28..67d6bdd2e3f2 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -126,6 +126,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) /* Default fragmentation threshold is maximum payload size */ ieee->fts = DEFAULT_FTS; + ieee->rts = DEFAULT_FTS; ieee->scan_age = DEFAULT_MAX_SCAN_AGE; ieee->open_wep = 1; diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 29770cfefc3d..cdee41cefb26 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -222,13 +222,15 @@ static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, return txb; } -/* SKBs are added to the ieee->tx_queue. */ +/* Incoming skb is converted to a txb which consist of + * a block of 802.11 fragment packets (stored as skbs) */ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_device *ieee = netdev_priv(dev); struct ieee80211_txb *txb = NULL; struct ieee80211_hdr_3addr *frag_hdr; - int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size; + int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size, + rts_required; unsigned long flags; struct net_device_stats *stats = &ieee->stats; int ether_type, encrypt, host_encrypt; @@ -334,6 +336,13 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) else bytes_last_frag = bytes_per_frag; + rts_required = (frag_size > ieee->rts + && ieee->config & CFG_IEEE80211_RTS); + if (rts_required) + nr_frags++; + else + bytes_last_frag = bytes_per_frag; + /* When we allocate the TXB we allocate enough space for the reserve * and full fragment bytes (bytes_per_frag doesn't include prefix, * postfix, header, FCS, etc.) */ @@ -346,7 +355,33 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) txb->encrypted = encrypt; txb->payload_size = bytes; - for (i = 0; i < nr_frags; i++) { + if (rts_required) { + skb_frag = txb->fragments[0]; + frag_hdr = + (struct ieee80211_hdr_3addr *)skb_put(skb_frag, hdr_len); + + /* + * Set header frame_ctl to the RTS. + */ + header.frame_ctl = + cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); + memcpy(frag_hdr, &header, hdr_len); + + /* + * Restore header frame_ctl to the original data setting. + */ + header.frame_ctl = cpu_to_le16(fc); + + if (ieee->config & + (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) + skb_put(skb_frag, 4); + + txb->rts_included = 1; + i = 1; + } else + i = 0; + + for (; i < nr_frags; i++) { skb_frag = txb->fragments[i]; if (host_encrypt) -- GitLab From 3f552bbf8614d2d26f488ca0d3e188bdec484bf4 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:54:47 -0500 Subject: [PATCH 0075/1519] [PATCH] ieee82011: Added ieee80211_tx_frame to convert generic 802.11 data frames, and callbacks tree 40adc78b623ae70d56074934ec6334eb4f0ae6a5 parent db43d847bcebaa3df6414e26d0008eb21690e8cf author James Ketrenos 1124445938 -0500 committer James Ketrenos 1127313102 -0500 Added ieee80211_tx_frame to convert generic 802.11 data frames into txbs for transmission. Added several purpose specific callbacks (handle_assoc, handle_auth, etc.) which the driver can register with for being notified on reception of variouf frame elements. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 23 +++++++++++++ net/ieee80211/ieee80211_rx.c | 58 +++++++++++++++++++++++--------- net/ieee80211/ieee80211_tx.c | 64 ++++++++++++++++++++++++++++++++++++ 3 files changed, 130 insertions(+), 15 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 5e11ccf8a763..43cf2e577191 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -769,6 +769,27 @@ struct ieee80211_device { int (*hard_start_xmit) (struct ieee80211_txb * txb, struct net_device * dev); int (*reset_port) (struct net_device * dev); + int (*is_queue_full) (struct net_device * dev, int pri); + + /* Typical STA methods */ + int (*handle_auth) (struct net_device * dev, + struct ieee80211_auth * auth); + int (*handle_disassoc) (struct net_device * dev, + struct ieee80211_disassoc * assoc); + int (*handle_beacon) (struct net_device * dev, + struct ieee80211_beacon * beacon, + struct ieee80211_network * network); + int (*handle_probe_response) (struct net_device * dev, + struct ieee80211_probe_response * resp, + struct ieee80211_network * network); + int (*handle_assoc_response) (struct net_device * dev, + struct ieee80211_assoc_response * resp, + struct ieee80211_network * network); + + /* Typical AP methods */ + int (*handle_assoc_request) (struct net_device * dev); + int (*handle_reassoc_request) (struct net_device * dev, + struct ieee80211_reassoc_request * req); /* This must be the last item so that it points to the data * allocated beyond this structure by alloc_ieee80211 */ @@ -877,6 +898,8 @@ extern int ieee80211_set_encryption(struct ieee80211_device *ieee); /* ieee80211_tx.c */ extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); +extern int ieee80211_tx_frame(struct ieee80211_device *ieee, + struct ieee80211_hdr *frame, int len); /* ieee80211_rx.c */ extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 71d14c7d915c..d1ae28280d7e 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -1029,12 +1029,18 @@ static inline void update_network(struct ieee80211_network *dst, /* dst->last_associate is not overwritten */ } +static inline int is_beacon(int fc) +{ + return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == IEEE80211_STYPE_BEACON); +} + static inline void ieee80211_process_probe_response(struct ieee80211_device *ieee, struct ieee80211_probe_response *beacon, struct ieee80211_rx_stats *stats) { + struct net_device *dev = ieee->dev; struct ieee80211_network network; struct ieee80211_network *target; struct ieee80211_network *oldest = NULL; @@ -1070,11 +1076,10 @@ static inline void ieee80211_process_probe_response(struct ieee80211_device escape_essid(info_element->data, info_element->len), MAC_ARG(beacon->header.addr3), - WLAN_FC_GET_STYPE(le16_to_cpu - (beacon->header. - frame_ctl)) == - IEEE80211_STYPE_PROBE_RESP ? - "PROBE RESPONSE" : "BEACON"); + is_beacon(le16_to_cpu + (beacon->header. + frame_ctl)) ? + "BEACON" : "PROBE RESPONSE"); return; } @@ -1123,11 +1128,10 @@ static inline void ieee80211_process_probe_response(struct ieee80211_device escape_essid(network.ssid, network.ssid_len), MAC_ARG(network.bssid), - WLAN_FC_GET_STYPE(le16_to_cpu - (beacon->header. - frame_ctl)) == - IEEE80211_STYPE_PROBE_RESP ? - "PROBE RESPONSE" : "BEACON"); + is_beacon(le16_to_cpu + (beacon->header. + frame_ctl)) ? + "BEACON" : "PROBE RESPONSE"); #endif memcpy(target, &network, sizeof(*target)); list_add_tail(&target->list, &ieee->network_list); @@ -1136,15 +1140,22 @@ static inline void ieee80211_process_probe_response(struct ieee80211_device escape_essid(target->ssid, target->ssid_len), MAC_ARG(target->bssid), - WLAN_FC_GET_STYPE(le16_to_cpu - (beacon->header. - frame_ctl)) == - IEEE80211_STYPE_PROBE_RESP ? - "PROBE RESPONSE" : "BEACON"); + is_beacon(le16_to_cpu + (beacon->header. + frame_ctl)) ? + "BEACON" : "PROBE RESPONSE"); update_network(target, &network); } spin_unlock_irqrestore(&ieee->lock, flags); + + if (is_beacon(le16_to_cpu(beacon->header.frame_ctl))) { + if (ieee->handle_beacon != NULL) + ieee->handle_beacon(dev, beacon, &network); + } else { + if (ieee->handle_probe_response != NULL) + ieee->handle_probe_response(dev, beacon, &network); + } } void ieee80211_rx_mgt(struct ieee80211_device *ieee, @@ -1185,6 +1196,23 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee, ieee80211_probe_response *) header, stats); break; + case IEEE80211_STYPE_AUTH: + + IEEE80211_DEBUG_MGMT("recieved auth (%d)\n", + WLAN_FC_GET_STYPE(le16_to_cpu + (header->frame_ctl))); + + if (ieee->handle_auth != NULL) + ieee->handle_auth(ieee->dev, + (struct ieee80211_auth *)header); + break; + + case IEEE80211_STYPE_DISASSOC: + if (ieee->handle_disassoc != NULL) + ieee->handle_disassoc(ieee->dev, + (struct ieee80211_disassoc *) + header); + break; default: IEEE80211_DEBUG_MGMT("received UNKNOWN (%d)\n", diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index cdee41cefb26..f505aa127e21 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -459,7 +459,71 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); stats->tx_errors++; return 1; +} + +/* Incoming 802.11 strucure is converted to a TXB + * a block of 802.11 fragment packets (stored as skbs) */ +int ieee80211_tx_frame(struct ieee80211_device *ieee, + struct ieee80211_hdr *frame, int len) +{ + struct ieee80211_txb *txb = NULL; + unsigned long flags; + struct net_device_stats *stats = &ieee->stats; + struct sk_buff *skb_frag; + + spin_lock_irqsave(&ieee->lock, flags); + + /* If there is no driver handler to take the TXB, dont' bother + * creating it... */ + if (!ieee->hard_start_xmit) { + printk(KERN_WARNING "%s: No xmit handler.\n", ieee->dev->name); + goto success; + } + if (unlikely(len < 24)) { + printk(KERN_WARNING "%s: skb too small (%d).\n", + ieee->dev->name, len); + goto success; + } + + /* When we allocate the TXB we allocate enough space for the reserve + * and full fragment bytes (bytes_per_frag doesn't include prefix, + * postfix, header, FCS, etc.) */ + txb = ieee80211_alloc_txb(1, len, GFP_ATOMIC); + if (unlikely(!txb)) { + printk(KERN_WARNING "%s: Could not allocate TXB\n", + ieee->dev->name); + goto failed; + } + txb->encrypted = 0; + txb->payload_size = len; + + skb_frag = txb->fragments[0]; + + memcpy(skb_put(skb_frag, len), frame, len); + + if (ieee->config & + (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) + skb_put(skb_frag, 4); + + success: + spin_unlock_irqrestore(&ieee->lock, flags); + + if (txb) { + if ((*ieee->hard_start_xmit) (txb, ieee->dev) == 0) { + stats->tx_packets++; + stats->tx_bytes += txb->payload_size; + return 0; + } + ieee80211_txb_free(txb); + } + return 0; + + failed: + spin_unlock_irqrestore(&ieee->lock, flags); + stats->tx_errors++; + return 1; } +EXPORT_SYMBOL(ieee80211_tx_frame); EXPORT_SYMBOL(ieee80211_txb_free); -- GitLab From 1264fc0498e1e20f97b1ab690e523e7a7fc50eab Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:54:53 -0500 Subject: [PATCH 0076/1519] [PATCH] ieee80211: Fix TKIP, repeated fragmentation problem, and payload_size reporting tree 8428e9f510e6ad6c77baec89cb57374842abf733 parent d78bfd3ddae9c422dd350159110f9c4d7cfc50de author Liu Hong 1124446520 -0500 committer James Ketrenos 1127313183 -0500 Fix TKIP, repeated fragmentation problem, and payload_size reporting 1. TKIP encryption Originally, TKIP encryption issues msdu + mpdu encryption on every fragment. Change the behavior to msdu encryption on the whole packet, then mpdu encryption on every fragment. 2. Avoid repeated fragmentation when !host_encrypt. We only need do fragmentation when using host encryption. Otherwise we only need pass the whole packet to driver, letting driver do the fragmentation. 3. change the txb->payload_size to correct value FW will use this value to determine whether to do fragmentation. If we pass the wrong value, fw may cut on the wrong bound which will make decryption fail when we do host encryption. NOTE: This requires changing drivers (hostap) that have extra_prefix_len used within them (structure member name change). Signed-off-by: Hong Liu Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 2 + include/net/ieee80211_crypt.h | 3 +- net/ieee80211/ieee80211_crypt.c | 4 +- net/ieee80211/ieee80211_crypt_ccmp.c | 4 +- net/ieee80211/ieee80211_crypt_tkip.c | 5 +- net/ieee80211/ieee80211_crypt_wep.c | 4 +- net/ieee80211/ieee80211_module.c | 7 +- net/ieee80211/ieee80211_tx.c | 148 +++++++++++++++------------ 8 files changed, 102 insertions(+), 75 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 43cf2e577191..46466f5a2b45 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -724,7 +724,9 @@ struct ieee80211_device { /* If the host performs {en,de}cryption, then set to 1 */ int host_encrypt; + int host_encrypt_msdu; int host_decrypt; + int host_open_frag; int ieee802_1x; /* is IEEE 802.1X used */ /* WPA data */ diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index 536e9a9e6718..24e4912a263a 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -63,7 +63,8 @@ struct ieee80211_crypto_ops { * extra_postfix_len; encrypt need not use all this space, but * the result must start at the beginning of the buffer and correct * length must be returned */ - int extra_prefix_len, extra_postfix_len; + int extra_mpdu_prefix_len, extra_mpdu_postfix_len; + int extra_msdu_prefix_len, extra_msdu_postfix_len; struct module *owner; }; diff --git a/net/ieee80211/ieee80211_crypt.c b/net/ieee80211/ieee80211_crypt.c index 60d3166facce..e26bcc918032 100644 --- a/net/ieee80211/ieee80211_crypt.c +++ b/net/ieee80211/ieee80211_crypt.c @@ -221,8 +221,8 @@ static struct ieee80211_crypto_ops ieee80211_crypt_null = { .decrypt_msdu = NULL, .set_key = NULL, .get_key = NULL, - .extra_prefix_len = 0, - .extra_postfix_len = 0, + .extra_mpdu_prefix_len = 0, + .extra_mpdu_postfix_len = 0, .owner = THIS_MODULE, }; diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c index d3b5cdee69ef..a3dc5712b98b 100644 --- a/net/ieee80211/ieee80211_crypt_ccmp.c +++ b/net/ieee80211/ieee80211_crypt_ccmp.c @@ -436,8 +436,8 @@ static struct ieee80211_crypto_ops ieee80211_crypt_ccmp = { .set_key = ieee80211_ccmp_set_key, .get_key = ieee80211_ccmp_get_key, .print_stats = ieee80211_ccmp_print_stats, - .extra_prefix_len = CCMP_HDR_LEN, - .extra_postfix_len = CCMP_MIC_LEN, + .extra_mpdu_prefix_len = CCMP_HDR_LEN, + .extra_mpdu_postfix_len = CCMP_MIC_LEN, .owner = THIS_MODULE, }; diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c index f091aacd4297..f973d6cb8248 100644 --- a/net/ieee80211/ieee80211_crypt_tkip.c +++ b/net/ieee80211/ieee80211_crypt_tkip.c @@ -690,8 +690,9 @@ static struct ieee80211_crypto_ops ieee80211_crypt_tkip = { .set_key = ieee80211_tkip_set_key, .get_key = ieee80211_tkip_get_key, .print_stats = ieee80211_tkip_print_stats, - .extra_prefix_len = 4 + 4, /* IV + ExtIV */ - .extra_postfix_len = 8 + 4, /* MIC + ICV */ + .extra_mpdu_prefix_len = 4 + 4, /* IV + ExtIV */ + .extra_mpdu_postfix_len = 4, /* ICV */ + .extra_msdu_postfix_len = 8, /* MIC */ .owner = THIS_MODULE, }; diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c index 63e783fa5173..2aaeac1e02d7 100644 --- a/net/ieee80211/ieee80211_crypt_wep.c +++ b/net/ieee80211/ieee80211_crypt_wep.c @@ -239,8 +239,8 @@ static struct ieee80211_crypto_ops ieee80211_crypt_wep = { .set_key = prism2_wep_set_key, .get_key = prism2_wep_get_key, .print_stats = prism2_wep_print_stats, - .extra_prefix_len = 4, /* IV */ - .extra_postfix_len = 4, /* ICV */ + .extra_mpdu_prefix_len = 4, /* IV */ + .extra_mpdu_postfix_len = 4, /* ICV */ .owner = THIS_MODULE, }; diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 67d6bdd2e3f2..dddc61647390 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -133,6 +133,12 @@ struct net_device *alloc_ieee80211(int sizeof_priv) /* Default to enabling full open WEP with host based encrypt/decrypt */ ieee->host_encrypt = 1; ieee->host_decrypt = 1; + /* Host fragementation in Open mode. Default is enabled. + * Note: host fragmentation is always enabled if host encryption + * is enabled. For cards can do hardware encryption, they must do + * hardware fragmentation as well. So we don't need a variable + * like host_enc_frag. */ + ieee->host_open_frag = 1; ieee->ieee802_1x = 1; /* Default to supporting 802.1x */ INIT_LIST_HEAD(&ieee->crypt_deinit_list); @@ -147,7 +153,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv) ieee->tkip_countermeasures = 0; ieee->drop_unencrypted = 0; ieee->privacy_invoked = 0; - ieee->ieee802_1x = 1; return dev; diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index f505aa127e21..23a1f88de7cb 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -128,7 +128,7 @@ payload of each frame is reduced to 492 bytes. static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 }; static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 }; -static inline int ieee80211_put_snap(u8 * data, u16 h_proto) +static inline int ieee80211_copy_snap(u8 * data, u16 h_proto) { struct ieee80211_snap_hdr *snap; u8 *oui; @@ -159,15 +159,9 @@ static inline int ieee80211_encrypt_fragment(struct ieee80211_device *ieee, /* To encrypt, frame format is: * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */ - - // PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption. - /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so - * call both MSDU and MPDU encryption functions from here. */ atomic_inc(&crypt->refcnt); res = 0; - if (crypt->ops->encrypt_msdu) - res = crypt->ops->encrypt_msdu(frag, hdr_len, crypt->priv); - if (res == 0 && crypt->ops->encrypt_mpdu) + if (crypt->ops->encrypt_mpdu) res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv); atomic_dec(&crypt->refcnt); @@ -222,7 +216,7 @@ static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, return txb; } -/* Incoming skb is converted to a txb which consist of +/* Incoming skb is converted to a txb which consists of * a block of 802.11 fragment packets (stored as skbs) */ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) { @@ -233,7 +227,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) rts_required; unsigned long flags; struct net_device_stats *stats = &ieee->stats; - int ether_type, encrypt, host_encrypt; + int ether_type, encrypt, host_encrypt, host_encrypt_msdu; int bytes, fc, hdr_len; struct sk_buff *skb_frag; struct ieee80211_hdr_3addr header = { /* Ensure zero initialized */ @@ -241,8 +235,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) .seq_ctl = 0 }; u8 dest[ETH_ALEN], src[ETH_ALEN]; - struct ieee80211_crypt_data *crypt; + int snapped = 0; spin_lock_irqsave(&ieee->lock, flags); @@ -266,6 +260,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) && ieee->sec.encrypt; host_encrypt = ieee->host_encrypt && encrypt; + host_encrypt_msdu = ieee->host_encrypt_msdu && encrypt; if (!encrypt && ieee->ieee802_1x && ieee->drop_unencrypted && ether_type != ETH_P_PAE) { @@ -291,14 +286,12 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) if (ieee->iw_mode == IW_MODE_INFRA) { fc |= IEEE80211_FCTL_TODS; - /* To DS: Addr1 = BSSID, Addr2 = SA, - Addr3 = DA */ + /* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */ memcpy(header.addr1, ieee->bssid, ETH_ALEN); memcpy(header.addr2, src, ETH_ALEN); memcpy(header.addr3, dest, ETH_ALEN); } else if (ieee->iw_mode == IW_MODE_ADHOC) { - /* not From/To DS: Addr1 = DA, Addr2 = SA, - Addr3 = BSSID */ + /* not From/To DS: Addr1 = DA, Addr2 = SA, Addr3 = BSSID */ memcpy(header.addr1, dest, ETH_ALEN); memcpy(header.addr2, src, ETH_ALEN); memcpy(header.addr3, ieee->bssid, ETH_ALEN); @@ -306,42 +299,75 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) header.frame_ctl = cpu_to_le16(fc); hdr_len = IEEE80211_3ADDR_LEN; - /* Determine fragmentation size based on destination (multicast - * and broadcast are not fragmented) */ - if (is_multicast_ether_addr(dest) || is_broadcast_ether_addr(dest)) - frag_size = MAX_FRAG_THRESHOLD; - else - frag_size = ieee->fts; + /* Encrypt msdu first on the whole data packet. */ + if ((host_encrypt || host_encrypt_msdu) && + crypt && crypt->ops && crypt->ops->encrypt_msdu) { + int res = 0; + int len = bytes + hdr_len + crypt->ops->extra_msdu_prefix_len + + crypt->ops->extra_msdu_postfix_len; + struct sk_buff *skb_new = dev_alloc_skb(len); + if (unlikely(!skb_new)) + goto failed; + skb_reserve(skb_new, crypt->ops->extra_msdu_prefix_len); + memcpy(skb_put(skb_new, hdr_len), &header, hdr_len); + snapped = 1; + ieee80211_copy_snap(skb_put(skb_new, SNAP_SIZE + sizeof(u16)), + ether_type); + memcpy(skb_put(skb_new, skb->len), skb->data, skb->len); + res = crypt->ops->encrypt_msdu(skb_new, hdr_len, crypt->priv); + if (res < 0) { + IEEE80211_ERROR("msdu encryption failed\n"); + dev_kfree_skb_any(skb_new); + goto failed; + } + dev_kfree_skb_any(skb); + skb = skb_new; + bytes += crypt->ops->extra_msdu_prefix_len + + crypt->ops->extra_msdu_postfix_len; + skb_pull(skb, hdr_len); + } - /* Determine amount of payload per fragment. Regardless of if - * this stack is providing the full 802.11 header, one will - * eventually be affixed to this fragment -- so we must account for - * it when determining the amount of payload space. */ - bytes_per_frag = frag_size - IEEE80211_3ADDR_LEN; - if (ieee->config & - (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) - bytes_per_frag -= IEEE80211_FCS_LEN; + if (host_encrypt || ieee->host_open_frag) { + /* Determine fragmentation size based on destination (multicast + * and broadcast are not fragmented) */ + if (is_multicast_ether_addr(dest)) + frag_size = MAX_FRAG_THRESHOLD; + else + frag_size = ieee->fts; + + /* Determine amount of payload per fragment. Regardless of if + * this stack is providing the full 802.11 header, one will + * eventually be affixed to this fragment -- so we must account + * for it when determining the amount of payload space. */ + bytes_per_frag = frag_size - IEEE80211_3ADDR_LEN; + if (ieee->config & + (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) + bytes_per_frag -= IEEE80211_FCS_LEN; - /* Each fragment may need to have room for encryptiong pre/postfix */ - if (host_encrypt) - bytes_per_frag -= crypt->ops->extra_prefix_len + - crypt->ops->extra_postfix_len; - - /* Number of fragments is the total bytes_per_frag / - * payload_per_fragment */ - nr_frags = bytes / bytes_per_frag; - bytes_last_frag = bytes % bytes_per_frag; - if (bytes_last_frag) - nr_frags++; - else - bytes_last_frag = bytes_per_frag; + /* Each fragment may need to have room for encryptiong + * pre/postfix */ + if (host_encrypt) + bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len + + crypt->ops->extra_mpdu_postfix_len; + + /* Number of fragments is the total + * bytes_per_frag / payload_per_fragment */ + nr_frags = bytes / bytes_per_frag; + bytes_last_frag = bytes % bytes_per_frag; + if (bytes_last_frag) + nr_frags++; + else + bytes_last_frag = bytes_per_frag; + } else { + nr_frags = 1; + bytes_per_frag = bytes_last_frag = bytes; + frag_size = bytes + IEEE80211_3ADDR_LEN; + } rts_required = (frag_size > ieee->rts && ieee->config & CFG_IEEE80211_RTS); if (rts_required) nr_frags++; - else - bytes_last_frag = bytes_per_frag; /* When we allocate the TXB we allocate enough space for the reserve * and full fragment bytes (bytes_per_frag doesn't include prefix, @@ -353,7 +379,11 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) goto failed; } txb->encrypted = encrypt; - txb->payload_size = bytes; + if (host_encrypt) + txb->payload_size = frag_size * (nr_frags - 1) + + bytes_last_frag; + else + txb->payload_size = bytes; if (rts_required) { skb_frag = txb->fragments[0]; @@ -385,7 +415,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) skb_frag = txb->fragments[i]; if (host_encrypt) - skb_reserve(skb_frag, crypt->ops->extra_prefix_len); + skb_reserve(skb_frag, + crypt->ops->extra_mpdu_prefix_len); frag_hdr = (struct ieee80211_hdr_3addr *)skb_put(skb_frag, hdr_len); @@ -402,11 +433,10 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) bytes = bytes_last_frag; } - /* Put a SNAP header on the first fragment */ - if (i == 0) { - ieee80211_put_snap(skb_put - (skb_frag, SNAP_SIZE + sizeof(u16)), - ether_type); + if (i == 0 && !snapped) { + ieee80211_copy_snap(skb_put + (skb_frag, SNAP_SIZE + sizeof(u16)), + ether_type); bytes -= SNAP_SIZE + sizeof(u16); } @@ -420,19 +450,6 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) if (host_encrypt) ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len); - /* ipw2200/2915 Hardware encryption doesn't support TKIP MIC */ - if (!ieee->host_encrypt && encrypt && - (ieee->sec.level == SEC_LEVEL_2) && - crypt && crypt->ops && crypt->ops->encrypt_msdu) { - int res = 0; - res = crypt->ops->encrypt_msdu(skb_frag, hdr_len, - crypt->priv); - if (res < 0) { - IEEE80211_ERROR("TKIP MIC encryption failed\n"); - goto failed; - } - } - if (ieee->config & (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) skb_put(skb_frag, 4); @@ -444,7 +461,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) dev_kfree_skb_any(skb); if (txb) { - if ((*ieee->hard_start_xmit) (txb, dev) == 0) { + int ret = (*ieee->hard_start_xmit) (txb, dev); + if (ret == 0) { stats->tx_packets++; stats->tx_bytes += txb->payload_size; return 0; -- GitLab From 2c0aa2a5c2dfa1293ae3a07517d0b7de149358a1 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:56:27 -0500 Subject: [PATCH 0077/1519] [PATCH] ieee80211: Return NETDEV_TX_BUSY when QoS buffer full tree ba6509c7cd1dd4244a2f285f2da5d632e7ffbb25 parent 7b5f9f2ddcabdaea214527a895e6e8445cafdd80 author James Ketrenos 1124447000 -0500 committer James Ketrenos 1127313383 -0500 Per the conversations with folks at OLS, the QoS layer in 802.11 drivers can now result in NETDEV_TX_BUSY being returned when the queue a packet is targetted for is full. To implement this, ieee80211_xmit will now call the driver's is_queue_full to determine if the current priority queue is full. If so, NETDEV_TX_BUSY is returned to the kernel and no processing is done on the frame. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_tx.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 23a1f88de7cb..e9efdd42ba37 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -236,8 +236,12 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) }; u8 dest[ETH_ALEN], src[ETH_ALEN]; struct ieee80211_crypt_data *crypt; + int priority = skb->priority; int snapped = 0; + if (ieee->is_queue_full && (*ieee->is_queue_full) (dev, priority)) + return NETDEV_TX_BUSY; + spin_lock_irqsave(&ieee->lock, flags); /* If there is no driver handler to take the TXB, dont' bother @@ -467,6 +471,14 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) stats->tx_bytes += txb->payload_size; return 0; } + + if (ret == NETDEV_TX_BUSY) { + printk(KERN_ERR "%s: NETDEV_TX_BUSY returned; " + "driver should report queue full via " + "ieee_device->is_queue_full.\n", + ieee->dev->name); + } + ieee80211_txb_free(txb); } -- GitLab From 9e8571affd1c54b9638b4ff9844e47aae07310f6 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:56:33 -0500 Subject: [PATCH 0078/1519] [PATCH] ieee80211: Add QoS (WME) support to the ieee80211 subsystem tree a3ad796273e98036eb0e9fc063225070fa24508a parent 1b9c0aeb377abf8e4a43a86cff42382f74ca0259 author Mohamed Abbas 1124447069 -0500 committer James Ketrenos 1127313435 -0500 Add QoS (WME) support to the ieee80211 subsystem. NOTE: This requires drivers that use the ieee80211 hard_start_xmit (ipw2100 and ipw2200) to add the priority parameter to their callback. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 103 ++++++++++- net/ieee80211/ieee80211_rx.c | 334 +++++++++++++++++++++++++++++++++-- net/ieee80211/ieee80211_tx.c | 5 +- 3 files changed, 417 insertions(+), 25 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 46466f5a2b45..72bd2b17eeb4 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -92,6 +92,7 @@ #define IEEE80211_STYPE_CFACK 0x0050 #define IEEE80211_STYPE_CFPOLL 0x0060 #define IEEE80211_STYPE_CFACKPOLL 0x0070 +#define IEEE80211_STYPE_QOS_DATA 0x0080 #define IEEE80211_SCTL_FRAG 0x000F #define IEEE80211_SCTL_SEQ 0xFFF0 @@ -153,6 +154,7 @@ const char *escape_essid(const char *essid, u8 essid_len); #define IEEE80211_DL_TX (1<<8) #define IEEE80211_DL_RX (1<<9) +#define IEEE80211_DL_QOS (1<<31) #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a) #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a) @@ -166,6 +168,7 @@ const char *escape_essid(const char *essid, u8 essid_len); #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a) #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a) #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a) +#define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a) #include #include #include /* ARPHRD_ETHER */ @@ -493,6 +496,7 @@ enum ieee80211_mfie { MFIE_TYPE_RSN = 48, MFIE_TYPE_RATES_EX = 50, MFIE_TYPE_GENERIC = 221, + MFIE_TYPE_QOS_PARAMETER = 222, }; /* Minimal header; can be used for passing 802.11 frames with sufficient @@ -540,6 +544,29 @@ struct ieee80211_hdr_4addr { u8 payload[0]; } __attribute__ ((packed)); +struct ieee80211_hdr_3addrqos { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 payload[0]; + u16 qos_ctl; +} __attribute__ ((packed)); + +struct ieee80211_hdr_4addrqos { + u16 frame_ctl; + u16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + u16 seq_ctl; + u8 addr4[ETH_ALEN]; + u8 payload[0]; + u16 qos_ctl; +} __attribute__ ((packed)); + struct ieee80211_info_element { u8 id; u8 len; @@ -641,9 +668,68 @@ struct ieee80211_txb { #define MAX_WPA_IE_LEN 64 -#define NETWORK_EMPTY_ESSID (1<<0) -#define NETWORK_HAS_OFDM (1<<1) -#define NETWORK_HAS_CCK (1<<2) +#define NETWORK_EMPTY_ESSID (1<<0) +#define NETWORK_HAS_OFDM (1<<1) +#define NETWORK_HAS_CCK (1<<2) + +/* QoS structure */ +#define NETWORK_HAS_QOS_PARAMETERS (1<<3) +#define NETWORK_HAS_QOS_INFORMATION (1<<4) +#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | NETWORK_HAS_QOS_INFORMATION) + +#define QOS_QUEUE_NUM 4 +#define QOS_OUI_LEN 3 +#define QOS_OUI_TYPE 2 +#define QOS_ELEMENT_ID 221 +#define QOS_OUI_INFO_SUB_TYPE 0 +#define QOS_OUI_PARAM_SUB_TYPE 1 +#define QOS_VERSION_1 1 +#define QOS_AIFSN_MIN_VALUE 2 + +struct ieee80211_qos_information_element { + u8 elementID; + u8 length; + u8 qui[QOS_OUI_LEN]; + u8 qui_type; + u8 qui_subtype; + u8 version; + u8 ac_info; +} __attribute__ ((packed)); + +struct ieee80211_qos_ac_parameter { + u8 aci_aifsn; + u8 ecw_min_max; + u16 tx_op_limit; +} __attribute__ ((packed)); + +struct ieee80211_qos_parameter_info { + struct ieee80211_qos_information_element info_element; + u8 reserved; + struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM]; +} __attribute__ ((packed)); + +struct ieee80211_qos_parameters { + u16 cw_min[QOS_QUEUE_NUM]; + u16 cw_max[QOS_QUEUE_NUM]; + u8 aifs[QOS_QUEUE_NUM]; + u8 flag[QOS_QUEUE_NUM]; + u16 tx_op_limit[QOS_QUEUE_NUM]; +} __attribute__ ((packed)); + +struct ieee80211_qos_data { + struct ieee80211_qos_parameters parameters; + int active; + int supported; + u8 param_count; + u8 old_param_count; +}; + +struct ieee80211_tim_parameters { + u8 tim_count; + u8 tim_period; +} __attribute__ ((packed)); + +/*******************************************************/ struct ieee80211_network { /* These entries are used to identify a unique network */ @@ -653,6 +739,8 @@ struct ieee80211_network { u8 ssid[IW_ESSID_MAX_SIZE + 1]; u8 ssid_len; + struct ieee80211_qos_data qos_data; + /* These are network statistics */ struct ieee80211_rx_stats stats; u16 capability; @@ -672,6 +760,7 @@ struct ieee80211_network { size_t wpa_ie_len; u8 rsn_ie[MAX_WPA_IE_LEN]; size_t rsn_ie_len; + struct ieee80211_tim_parameters tim; struct list_head list; }; @@ -769,10 +858,13 @@ struct ieee80211_device { void (*set_security) (struct net_device * dev, struct ieee80211_security * sec); int (*hard_start_xmit) (struct ieee80211_txb * txb, - struct net_device * dev); + struct net_device * dev, int pri); int (*reset_port) (struct net_device * dev); int (*is_queue_full) (struct net_device * dev, int pri); + int (*handle_management) (struct net_device * dev, + struct ieee80211_network * network, u16 type); + /* Typical STA methods */ int (*handle_auth) (struct net_device * dev, struct ieee80211_auth * auth); @@ -854,11 +946,14 @@ extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, extern inline int ieee80211_get_hdrlen(u16 fc) { int hdrlen = IEEE80211_3ADDR_LEN; + u16 stype = WLAN_FC_GET_STYPE(fc); switch (WLAN_FC_GET_TYPE(fc)) { case IEEE80211_FTYPE_DATA: if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) hdrlen = IEEE80211_4ADDR_LEN; + if (stype & IEEE80211_STYPE_QOS_DATA) + hdrlen += 2; break; case IEEE80211_FTYPE_CTL: switch (WLAN_FC_GET_STYPE(fc)) { diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index d1ae28280d7e..2c4613527dfd 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -534,6 +534,9 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, /* Nullfunc frames may have PS-bit set, so they must be passed to * hostap_handle_sta_rx() before being dropped here. */ + + stype &= ~IEEE80211_STYPE_QOS_DATA; + if (stype != IEEE80211_STYPE_DATA && stype != IEEE80211_STYPE_DATA_CFACK && stype != IEEE80211_STYPE_DATA_CFPOLL && @@ -758,6 +761,264 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, #define MGMT_FRAME_FIXED_PART_LENGTH 0x24 +static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 }; + +/* +* Make ther structure we read from the beacon packet has +* the right values +*/ +static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element + *info_element, int sub_type) +{ + + if (info_element->qui_subtype != sub_type) + return -1; + if (memcmp(info_element->qui, qos_oui, QOS_OUI_LEN)) + return -1; + if (info_element->qui_type != QOS_OUI_TYPE) + return -1; + if (info_element->version != QOS_VERSION_1) + return -1; + + return 0; +} + +/* + * Parse a QoS parameter element + */ +static int ieee80211_read_qos_param_element(struct ieee80211_qos_parameter_info + *element_param, struct ieee80211_info_element + *info_element) +{ + int ret = 0; + u16 size = sizeof(struct ieee80211_qos_parameter_info) - 2; + + if ((info_element == NULL) || (element_param == NULL)) + return -1; + + if (info_element->id == QOS_ELEMENT_ID && info_element->len == size) { + memcpy(element_param->info_element.qui, info_element->data, + info_element->len); + element_param->info_element.elementID = info_element->id; + element_param->info_element.length = info_element->len; + } else + ret = -1; + if (ret == 0) + ret = ieee80211_verify_qos_info(&element_param->info_element, + QOS_OUI_PARAM_SUB_TYPE); + return ret; +} + +/* + * Parse a QoS information element + */ +static int ieee80211_read_qos_info_element(struct + ieee80211_qos_information_element + *element_info, struct ieee80211_info_element + *info_element) +{ + int ret = 0; + u16 size = sizeof(struct ieee80211_qos_information_element) - 2; + + if (element_info == NULL) + return -1; + if (info_element == NULL) + return -1; + + if ((info_element->id == QOS_ELEMENT_ID) && (info_element->len == size)) { + memcpy(element_info->qui, info_element->data, + info_element->len); + element_info->elementID = info_element->id; + element_info->length = info_element->len; + } else + ret = -1; + + if (ret == 0) + ret = ieee80211_verify_qos_info(element_info, + QOS_OUI_INFO_SUB_TYPE); + return ret; +} + +/* + * Write QoS parameters from the ac parameters. + */ +static int ieee80211_qos_convert_ac_to_parameters(struct + ieee80211_qos_parameter_info + *param_elm, struct + ieee80211_qos_parameters + *qos_param) +{ + int rc = 0; + int i; + struct ieee80211_qos_ac_parameter *ac_params; + u32 txop; + u8 cw_min; + u8 cw_max; + + for (i = 0; i < QOS_QUEUE_NUM; i++) { + ac_params = &(param_elm->ac_params_record[i]); + + qos_param->aifs[i] = (ac_params->aci_aifsn) & 0x0F; + qos_param->aifs[i] -= (qos_param->aifs[i] < 2) ? 0 : 2; + + cw_min = ac_params->ecw_min_max & 0x0F; + qos_param->cw_min[i] = (u16) ((1 << cw_min) - 1); + + cw_max = (ac_params->ecw_min_max & 0xF0) >> 4; + qos_param->cw_max[i] = (u16) ((1 << cw_max) - 1); + + qos_param->flag[i] = + (ac_params->aci_aifsn & 0x10) ? 0x01 : 0x00; + + txop = le16_to_cpu(ac_params->tx_op_limit) * 32; + qos_param->tx_op_limit[i] = (u16) txop; + } + return rc; +} + +/* + * we have a generic data element which it may contain QoS information or + * parameters element. check the information element length to decide + * which type to read + */ +static int ieee80211_parse_qos_info_param_IE(struct ieee80211_info_element + *info_element, + struct ieee80211_network *network) +{ + int rc = 0; + struct ieee80211_qos_parameters *qos_param = NULL; + struct ieee80211_qos_information_element qos_info_element; + + rc = ieee80211_read_qos_info_element(&qos_info_element, info_element); + + if (rc == 0) { + network->qos_data.param_count = qos_info_element.ac_info & 0x0F; + network->flags |= NETWORK_HAS_QOS_INFORMATION; + } else { + struct ieee80211_qos_parameter_info param_element; + + rc = ieee80211_read_qos_param_element(¶m_element, + info_element); + if (rc == 0) { + qos_param = &(network->qos_data.parameters); + ieee80211_qos_convert_ac_to_parameters(¶m_element, + qos_param); + network->flags |= NETWORK_HAS_QOS_PARAMETERS; + network->qos_data.param_count = + param_element.info_element.ac_info & 0x0F; + } + } + + if (rc == 0) { + IEEE80211_DEBUG_QOS("QoS is supported\n"); + network->qos_data.supported = 1; + } + return rc; +} + +static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct ieee80211_assoc_response + *frame, struct ieee80211_rx_stats *stats) +{ + struct ieee80211_network network_resp; + struct ieee80211_network *network = &network_resp; + struct ieee80211_info_element *info_element; + struct net_device *dev = ieee->dev; + u16 left; + + network->flags = 0; + network->qos_data.active = 0; + network->qos_data.supported = 0; + network->qos_data.param_count = 0; + network->qos_data.old_param_count = 0; + + //network->atim_window = le16_to_cpu(frame->aid) & (0x3FFF); + network->atim_window = le16_to_cpu(frame->aid); + network->listen_interval = le16_to_cpu(frame->status); + + info_element = frame->info_element; + left = stats->len - sizeof(*frame); + + while (left >= sizeof(struct ieee80211_info_element)) { + if (sizeof(struct ieee80211_info_element) + + info_element->len > left) { + IEEE80211_DEBUG_QOS("ASSOC RESP: parse failed: " + "info_element->len + 2 > left : " + "info_element->len+2=%zd left=%d, id=%d.\n", + info_element->len + + sizeof(struct + ieee80211_info_element), + left, info_element->id); + return 1; + } + + switch (info_element->id) { + case MFIE_TYPE_SSID: + if (ieee80211_is_empty_essid(info_element->data, + info_element->len)) { + network->flags |= NETWORK_EMPTY_ESSID; + break; + } + + network->ssid_len = min(info_element->len, + (u8) IW_ESSID_MAX_SIZE); + memcpy(network->ssid, info_element->data, + network->ssid_len); + if (network->ssid_len < IW_ESSID_MAX_SIZE) + memset(network->ssid + network->ssid_len, 0, + IW_ESSID_MAX_SIZE - network->ssid_len); + + IEEE80211_DEBUG_QOS("MFIE_TYPE_SSID: '%s' len=%d.\n", + network->ssid, network->ssid_len); + break; + + case MFIE_TYPE_TIM: + IEEE80211_DEBUG_QOS("MFIE_TYPE_TIM: ignored\n"); + break; + + case MFIE_TYPE_IBSS_SET: + IEEE80211_DEBUG_QOS("MFIE_TYPE_IBSS_SET: ignored\n"); + break; + + case MFIE_TYPE_CHALLENGE: + IEEE80211_DEBUG_QOS("MFIE_TYPE_CHALLENGE: ignored\n"); + break; + + case MFIE_TYPE_GENERIC: + IEEE80211_DEBUG_QOS("MFIE_TYPE_GENERIC: %d bytes\n", + info_element->len); + ieee80211_parse_qos_info_param_IE(info_element, + network); + break; + + case MFIE_TYPE_RSN: + IEEE80211_DEBUG_QOS("MFIE_TYPE_RSN: %d bytes\n", + info_element->len); + break; + + case MFIE_TYPE_QOS_PARAMETER: + printk("QoS Error need to parse QOS_PARAMETER IE\n"); + break; + + default: + IEEE80211_DEBUG_QOS("unsupported IE %d\n", + info_element->id); + break; + } + + left -= sizeof(struct ieee80211_info_element) + + info_element->len; + info_element = (struct ieee80211_info_element *) + &info_element->data[info_element->len]; + } + + if (ieee->handle_assoc_response != NULL) + ieee->handle_assoc_response(dev, frame, network); + + return 0; +} + +/***************************************************/ + static inline int ieee80211_is_ofdm_rate(u8 rate) { switch (rate & ~IEEE80211_BASIC_RATE_MASK) { @@ -786,6 +1047,9 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i struct ieee80211_info_element *info_element; u16 left; u8 i; + network->qos_data.active = 0; + network->qos_data.supported = 0; + network->qos_data.param_count = 0; /* Pull out fixed field data */ memcpy(network->bssid, beacon->header.addr3, ETH_ALEN); @@ -813,13 +1077,11 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i info_element = beacon->info_element; left = stats->len - sizeof(*beacon); - while (left >= sizeof(struct ieee80211_info_element)) { - if (sizeof(struct ieee80211_info_element) + info_element->len > - left) { + while (left >= sizeof(*info_element)) { + if (sizeof(*info_element) + info_element->len > left) { IEEE80211_DEBUG_SCAN ("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%Zd left=%d.\n", - info_element->len + - sizeof(struct ieee80211_info_element), left); + info_element->len + sizeof(*info_element), left); return 1; } @@ -847,15 +1109,14 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i #ifdef CONFIG_IEEE80211_DEBUG p = rates_str; #endif - network->rates_len = - min(info_element->len, MAX_RATES_LENGTH); + network->rates_len = min(info_element->len, + MAX_RATES_LENGTH); for (i = 0; i < network->rates_len; i++) { network->rates[i] = info_element->data[i]; #ifdef CONFIG_IEEE80211_DEBUG - p += snprintf(p, - sizeof(rates_str) - (p - - rates_str), - "%02X ", network->rates[i]); + p += snprintf(p, sizeof(rates_str) - + (p - rates_str), "%02X ", + network->rates[i]); #endif if (ieee80211_is_ofdm_rate (info_element->data[i])) { @@ -875,15 +1136,14 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i #ifdef CONFIG_IEEE80211_DEBUG p = rates_str; #endif - network->rates_ex_len = - min(info_element->len, MAX_RATES_EX_LENGTH); + network->rates_ex_len = min(info_element->len, + MAX_RATES_EX_LENGTH); for (i = 0; i < network->rates_ex_len; i++) { network->rates_ex[i] = info_element->data[i]; #ifdef CONFIG_IEEE80211_DEBUG - p += snprintf(p, - sizeof(rates_str) - (p - - rates_str), - "%02X ", network->rates[i]); + p += snprintf(p, sizeof(rates_str) - + (p - rates_str), "%02X ", + network->rates[i]); #endif if (ieee80211_is_ofdm_rate (info_element->data[i])) { @@ -929,6 +1189,10 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i case MFIE_TYPE_GENERIC: IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n", info_element->len); + if (!ieee80211_parse_qos_info_param_IE(info_element, + network)) + break; + if (info_element->len >= 4 && info_element->data[0] == 0x00 && info_element->data[1] == 0x50 && @@ -950,14 +1214,18 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i network->rsn_ie_len); break; + case MFIE_TYPE_QOS_PARAMETER: + printk(KERN_ERR + "QoS Error need to parse QOS_PARAMETER IE\n"); + break; + default: IEEE80211_DEBUG_SCAN("unsupported IE %d\n", info_element->id); break; } - left -= sizeof(struct ieee80211_info_element) + - info_element->len; + left -= sizeof(*info_element) + info_element->len; info_element = (struct ieee80211_info_element *) &info_element->data[info_element->len]; } @@ -1004,6 +1272,9 @@ static inline int is_same_network(struct ieee80211_network *src, static inline void update_network(struct ieee80211_network *dst, struct ieee80211_network *src) { + int qos_active; + u8 old_param; + memcpy(&dst->stats, &src->stats, sizeof(struct ieee80211_rx_stats)); dst->capability = src->capability; memcpy(dst->rates, src->rates, src->rates_len); @@ -1026,6 +1297,28 @@ static inline void update_network(struct ieee80211_network *dst, dst->rsn_ie_len = src->rsn_ie_len; dst->last_scanned = jiffies; + qos_active = src->qos_data.active; + old_param = dst->qos_data.old_param_count; + if (dst->flags & NETWORK_HAS_QOS_MASK) + memcpy(&dst->qos_data, &src->qos_data, + sizeof(struct ieee80211_qos_data)); + else { + dst->qos_data.supported = src->qos_data.supported; + dst->qos_data.param_count = src->qos_data.param_count; + } + + if (dst->qos_data.supported == 1) { + if (dst->ssid_len) + IEEE80211_DEBUG_QOS + ("QoS the network %s is QoS supported\n", + dst->ssid); + else + IEEE80211_DEBUG_QOS + ("QoS the network is QoS supported\n"); + } + dst->qos_data.active = qos_active; + dst->qos_data.old_param_count = old_param; + /* dst->last_associate is not overwritten */ } @@ -1167,6 +1460,9 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee, IEEE80211_DEBUG_MGMT("received ASSOCIATION RESPONSE (%d)\n", WLAN_FC_GET_STYPE(le16_to_cpu (header->frame_ctl))); + ieee80211_handle_assoc_resp(ieee, + (struct ieee80211_assoc_response *) + header, stats); break; case IEEE80211_STYPE_REASSOC_RESP: diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index e9efdd42ba37..aba72f9880a1 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -465,7 +465,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) dev_kfree_skb_any(skb); if (txb) { - int ret = (*ieee->hard_start_xmit) (txb, dev); + int ret = (*ieee->hard_start_xmit) (txb, dev, priority); if (ret == 0) { stats->tx_packets++; stats->tx_bytes += txb->payload_size; @@ -500,6 +500,7 @@ int ieee80211_tx_frame(struct ieee80211_device *ieee, unsigned long flags; struct net_device_stats *stats = &ieee->stats; struct sk_buff *skb_frag; + int priority = -1; spin_lock_irqsave(&ieee->lock, flags); @@ -540,7 +541,7 @@ int ieee80211_tx_frame(struct ieee80211_device *ieee, spin_unlock_irqrestore(&ieee->lock, flags); if (txb) { - if ((*ieee->hard_start_xmit) (txb, ieee->dev) == 0) { + if ((*ieee->hard_start_xmit) (txb, ieee->dev, priority) == 0) { stats->tx_packets++; stats->tx_bytes += txb->payload_size; return 0; -- GitLab From 02cda6ae01814f58422c45259fb48136fbd7bcc1 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:56:38 -0500 Subject: [PATCH 0079/1519] [PATCH] ieee80211: Added ieee80211_geo to provide helper functions tree 385b391fc0d7c124cd0547fdb6183e9a0c333391 parent 97d7a47f76e72bedde7f402785559ed4c7a8e8e8 author James Ketrenos 1124447590 -0500 committer James Ketrenos 1127313735 -0500 Added ieee80211_geo to provide helper functions to drivers for implementing supported channel maps. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 46 +++++++++++ net/ieee80211/Makefile | 3 +- net/ieee80211/ieee80211_geo.c | 141 ++++++++++++++++++++++++++++++++++ 3 files changed, 189 insertions(+), 1 deletion(-) create mode 100644 net/ieee80211/ieee80211_geo.c diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 72bd2b17eeb4..b3815fd810c8 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -781,6 +781,38 @@ enum ieee80211_state { #define CFG_IEEE80211_COMPUTE_FCS (1<<1) #define CFG_IEEE80211_RTS (1<<2) +#define IEEE80211_24GHZ_MIN_CHANNEL 1 +#define IEEE80211_24GHZ_MAX_CHANNEL 14 +#define IEEE80211_24GHZ_CHANNELS 14 + +#define IEEE80211_52GHZ_MIN_CHANNEL 36 +#define IEEE80211_52GHZ_MAX_CHANNEL 165 +#define IEEE80211_52GHZ_CHANNELS 32 + +enum { + IEEE80211_CH_PASSIVE_ONLY = (1 << 0), + IEEE80211_CH_B_ONLY = (1 << 2), + IEEE80211_CH_NO_IBSS = (1 << 3), + IEEE80211_CH_UNIFORM_SPREADING = (1 << 4), + IEEE80211_CH_RADAR_DETECT = (1 << 5), + IEEE80211_CH_INVALID = (1 << 6), +}; + +struct ieee80211_channel { + u16 freq; + u8 channel; + u8 flags; + u8 max_power; +}; + +struct ieee80211_geo { + u8 name[4]; + u8 bg_channels; + u8 a_channels; + struct ieee80211_channel bg[IEEE80211_24GHZ_CHANNELS]; + struct ieee80211_channel a[IEEE80211_52GHZ_CHANNELS]; +}; + struct ieee80211_device { struct net_device *dev; struct ieee80211_security sec; @@ -789,6 +821,8 @@ struct ieee80211_device { struct net_device_stats stats; struct ieee80211_stats ieee_stats; + struct ieee80211_geo geo; + /* Probe / Beacon management */ struct list_head network_free_list; struct list_head network_list; @@ -1005,6 +1039,18 @@ extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, struct ieee80211_hdr_4addr *header, struct ieee80211_rx_stats *stats); +/* ieee80211_geo.c */ +extern const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device + *ieee); +extern int ieee80211_set_geo(struct ieee80211_device *ieee, + const struct ieee80211_geo *geo); + +extern int ieee80211_is_valid_channel(struct ieee80211_device *ieee, + u8 channel); +extern int ieee80211_channel_to_index(struct ieee80211_device *ieee, + u8 channel); +extern u8 ieee80211_freq_to_channel(struct ieee80211_device *ieee, u32 freq); + /* ieee80211_wx.c */ extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee, struct iw_request_info *info, diff --git a/net/ieee80211/Makefile b/net/ieee80211/Makefile index a6ccac5baea8..f988417121da 100644 --- a/net/ieee80211/Makefile +++ b/net/ieee80211/Makefile @@ -7,5 +7,6 @@ ieee80211-objs := \ ieee80211_module.o \ ieee80211_tx.o \ ieee80211_rx.o \ - ieee80211_wx.o + ieee80211_wx.o \ + ieee80211_geo.o diff --git a/net/ieee80211/ieee80211_geo.c b/net/ieee80211/ieee80211_geo.c new file mode 100644 index 000000000000..c4b54ef8f6d5 --- /dev/null +++ b/net/ieee80211/ieee80211_geo.c @@ -0,0 +1,141 @@ +/****************************************************************************** + + Copyright(c) 2005 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify it + under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., 59 + Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + The full GNU General Public License is included in this distribution in the + file called LICENSE. + + Contact Information: + James P. Ketrenos + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +******************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +int ieee80211_is_valid_channel(struct ieee80211_device *ieee, u8 channel) +{ + int i; + + /* Driver needs to initialize the geography map before using + * these helper functions */ + BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0); + + if (ieee->freq_band & IEEE80211_24GHZ_BAND) + for (i = 0; i < ieee->geo.bg_channels; i++) + /* NOTE: If G mode is currently supported but + * this is a B only channel, we don't see it + * as valid. */ + if ((ieee->geo.bg[i].channel == channel) && + (!(ieee->mode & IEEE_G) || + !(ieee->geo.bg[i].flags & IEEE80211_CH_B_ONLY))) + return IEEE80211_24GHZ_BAND; + + if (ieee->freq_band & IEEE80211_52GHZ_BAND) + for (i = 0; i < ieee->geo.a_channels; i++) + if (ieee->geo.a[i].channel == channel) + return IEEE80211_52GHZ_BAND; + + return 0; +} + +int ieee80211_channel_to_index(struct ieee80211_device *ieee, u8 channel) +{ + int i; + + /* Driver needs to initialize the geography map before using + * these helper functions */ + BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0); + + if (ieee->freq_band & IEEE80211_24GHZ_BAND) + for (i = 0; i < ieee->geo.bg_channels; i++) + if (ieee->geo.bg[i].channel == channel) + return i; + + if (ieee->freq_band & IEEE80211_52GHZ_BAND) + for (i = 0; i < ieee->geo.a_channels; i++) + if (ieee->geo.a[i].channel == channel) + return i; + + return -1; +} + +u8 ieee80211_freq_to_channel(struct ieee80211_device * ieee, u32 freq) +{ + int i; + + /* Driver needs to initialize the geography map before using + * these helper functions */ + BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0); + + freq /= 100000; + + if (ieee->freq_band & IEEE80211_24GHZ_BAND) + for (i = 0; i < ieee->geo.bg_channels; i++) + if (ieee->geo.bg[i].freq == freq) + return ieee->geo.bg[i].channel; + + if (ieee->freq_band & IEEE80211_52GHZ_BAND) + for (i = 0; i < ieee->geo.a_channels; i++) + if (ieee->geo.a[i].freq == freq) + return ieee->geo.a[i].channel; + + return 0; +} + +int ieee80211_set_geo(struct ieee80211_device *ieee, + const struct ieee80211_geo *geo) +{ + memcpy(ieee->geo.name, geo->name, 3); + ieee->geo.name[3] = '\0'; + ieee->geo.bg_channels = geo->bg_channels; + ieee->geo.a_channels = geo->a_channels; + memcpy(ieee->geo.bg, geo->bg, geo->bg_channels * + sizeof(struct ieee80211_channel)); + memcpy(ieee->geo.a, geo->a, ieee->geo.a_channels * + sizeof(struct ieee80211_channel)); + return 0; +} + +const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device *ieee) +{ + return &ieee->geo; +} + +EXPORT_SYMBOL(ieee80211_is_valid_channel); +EXPORT_SYMBOL(ieee80211_freq_to_channel); +EXPORT_SYMBOL(ieee80211_channel_to_index); +EXPORT_SYMBOL(ieee80211_set_geo); +EXPORT_SYMBOL(ieee80211_get_geo); -- GitLab From 3905ec4561b7b049e9c2e27311d072c356dbdee2 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:56:42 -0500 Subject: [PATCH 0080/1519] [PATCH] ieee80211: Added ieee80211_radiotap.h tree 383c59b2516a61f2683f02dfebbed0caf6ee5dc3 parent a04948f63fd96c4b875a43f78afad1a0874cc441 author Mike Kershaw 1124447833 -0500 committer James Ketrenos 1127313883 -0500 Added ieee80211_radiotap.h to enhance statistic reporting to user space from wireless drivers. Signed-off-by: Mike Kershaw Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/linux/if_arp.h | 1 + include/net/ieee80211_radiotap.h | 231 +++++++++++++++++++++++++++++++ 2 files changed, 232 insertions(+) create mode 100644 include/net/ieee80211_radiotap.h diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index 0856548a2a08..a8b1a2071838 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -84,6 +84,7 @@ #define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ #define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ #define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ +#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ #define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ #define ARPHRD_NONE 0xFFFE /* zero header length */ diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h new file mode 100644 index 000000000000..429b73892a5f --- /dev/null +++ b/include/net/ieee80211_radiotap.h @@ -0,0 +1,231 @@ +/* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */ +/* $NetBSD: ieee80211_radiotap.h,v 1.11 2005/06/22 06:16:02 dyoung Exp $ */ + +/*- + * Copyright (c) 2003, 2004 David Young. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of David Young may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID + * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ + +/* + * Modifications to fit into the linux IEEE 802.11 stack, + * Mike Kershaw (dragorn@kismetwireless.net) + */ + +#ifndef IEEE80211RADIOTAP_H +#define IEEE80211RADIOTAP_H + +#include +#include + +/* Radiotap header version (from official NetBSD feed) */ +#define IEEE80211RADIOTAP_VERSION "1.5" +/* Base version of the radiotap packet header data */ +#define PKTHDR_RADIOTAP_VERSION 0 + +/* A generic radio capture format is desirable. There is one for + * Linux, but it is neither rigidly defined (there were not even + * units given for some fields) nor easily extensible. + * + * I suggest the following extensible radio capture format. It is + * based on a bitmap indicating which fields are present. + * + * I am trying to describe precisely what the application programmer + * should expect in the following, and for that reason I tell the + * units and origin of each measurement (where it applies), or else I + * use sufficiently weaselly language ("is a monotonically nondecreasing + * function of...") that I cannot set false expectations for lawyerly + * readers. + */ + +/* XXX tcpdump/libpcap do not tolerate variable-length headers, + * yet, so we pad every radiotap header to 64 bytes. Ugh. + */ +#define IEEE80211_RADIOTAP_HDRLEN 64 + +/* The radio capture header precedes the 802.11 header. */ +struct ieee80211_radiotap_header { + u8 it_version; /* Version 0. Only increases + * for drastic changes, + * introduction of compatible + * new fields does not count. + */ + u8 it_pad; + u16 it_len; /* length of the whole + * header in bytes, including + * it_version, it_pad, + * it_len, and data fields. + */ + u32 it_present; /* A bitmap telling which + * fields are present. Set bit 31 + * (0x80000000) to extend the + * bitmap by another 32 bits. + * Additional extensions are made + * by setting bit 31. + */ +}; + +/* Name Data type Units + * ---- --------- ----- + * + * IEEE80211_RADIOTAP_TSFT u64 microseconds + * + * Value in microseconds of the MAC's 64-bit 802.11 Time + * Synchronization Function timer when the first bit of the + * MPDU arrived at the MAC. For received frames, only. + * + * IEEE80211_RADIOTAP_CHANNEL 2 x u16 MHz, bitmap + * + * Tx/Rx frequency in MHz, followed by flags (see below). + * + * IEEE80211_RADIOTAP_FHSS u16 see below + * + * For frequency-hopping radios, the hop set (first byte) + * and pattern (second byte). + * + * IEEE80211_RADIOTAP_RATE u8 500kb/s + * + * Tx/Rx data rate + * + * IEEE80211_RADIOTAP_DBM_ANTSIGNAL int8_t decibels from + * one milliwatt (dBm) + * + * RF signal power at the antenna, decibel difference from + * one milliwatt. + * + * IEEE80211_RADIOTAP_DBM_ANTNOISE int8_t decibels from + * one milliwatt (dBm) + * + * RF noise power at the antenna, decibel difference from one + * milliwatt. + * + * IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB) + * + * RF signal power at the antenna, decibel difference from an + * arbitrary, fixed reference. + * + * IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB) + * + * RF noise power at the antenna, decibel difference from an + * arbitrary, fixed reference point. + * + * IEEE80211_RADIOTAP_LOCK_QUALITY u16 unitless + * + * Quality of Barker code lock. Unitless. Monotonically + * nondecreasing with "better" lock strength. Called "Signal + * Quality" in datasheets. (Is there a standard way to measure + * this?) + * + * IEEE80211_RADIOTAP_TX_ATTENUATION u16 unitless + * + * Transmit power expressed as unitless distance from max + * power set at factory calibration. 0 is max power. + * Monotonically nondecreasing with lower power levels. + * + * IEEE80211_RADIOTAP_DB_TX_ATTENUATION u16 decibels (dB) + * + * Transmit power expressed as decibel distance from max power + * set at factory calibration. 0 is max power. Monotonically + * nondecreasing with lower power levels. + * + * IEEE80211_RADIOTAP_DBM_TX_POWER int8_t decibels from + * one milliwatt (dBm) + * + * Transmit power expressed as dBm (decibels from a 1 milliwatt + * reference). This is the absolute power level measured at + * the antenna port. + * + * IEEE80211_RADIOTAP_FLAGS u8 bitmap + * + * Properties of transmitted and received frames. See flags + * defined below. + * + * IEEE80211_RADIOTAP_ANTENNA u8 antenna index + * + * Unitless indication of the Rx/Tx antenna for this packet. + * The first antenna is antenna 0. + * + * IEEE80211_RADIOTAP_FCS u32 data + * + * FCS from frame in network byte order. + */ +enum ieee80211_radiotap_type { + IEEE80211_RADIOTAP_TSFT = 0, + IEEE80211_RADIOTAP_FLAGS = 1, + IEEE80211_RADIOTAP_RATE = 2, + IEEE80211_RADIOTAP_CHANNEL = 3, + IEEE80211_RADIOTAP_FHSS = 4, + IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5, + IEEE80211_RADIOTAP_DBM_ANTNOISE = 6, + IEEE80211_RADIOTAP_LOCK_QUALITY = 7, + IEEE80211_RADIOTAP_TX_ATTENUATION = 8, + IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9, + IEEE80211_RADIOTAP_DBM_TX_POWER = 10, + IEEE80211_RADIOTAP_ANTENNA = 11, + IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12, + IEEE80211_RADIOTAP_DB_ANTNOISE = 13, + IEEE80211_RADIOTAP_EXT = 31, +}; + +/* Channel flags. */ +#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */ +#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */ +#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */ +#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */ +#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */ +#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */ +#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */ +#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */ + +/* For IEEE80211_RADIOTAP_FLAGS */ +#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received + * during CFP + */ +#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received + * with short + * preamble + */ +#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received + * with WEP encryption + */ +#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received + * with fragmentation + */ +#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */ +#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between + * 802.11 header and payload + * (to 32-bit boundary) + */ + +/* Ugly macro to convert literal channel numbers into their mhz equivalents + * There are certianly some conditions that will break this (like feeding it '30') + * but they shouldn't arise since nothing talks on channel 30. */ +#define ieee80211chan2mhz(x) \ + (((x) <= 14) ? \ + (((x) == 14) ? 2484 : ((x) * 5) + 2407) : \ + ((x) + 1000) * 5) + +#endif /* IEEE80211_RADIOTAP_H */ -- GitLab From cdcfc210820b8e043cb606eddc145906185c6743 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:56:49 -0500 Subject: [PATCH 0081/1519] [PATCH] ieee80211: Additional fixes for endian-aware types tree 589bbb92ce7cdf7c2ae820b0ebd3f8fbf1baeee9 parent c6ce9081e79e8836a11e86e3d38297521a2420be author Jiri Benc 1125015310 -0400 committer James Ketrenos 1127313914 -0500 Additional fixes for endian-aware types Based on the application of __le16/__be16 changes already made w/ a prior patch by Michael Wu Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 58 ++++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index b3815fd810c8..372a173d36df 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -503,68 +503,68 @@ enum ieee80211_mfie { * information to determine what type of underlying data type is actually * stored in the data. */ struct ieee80211_hdr { - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 payload[0]; } __attribute__ ((packed)); struct ieee80211_hdr_1addr { - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 payload[0]; } __attribute__ ((packed)); struct ieee80211_hdr_2addr { - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 payload[0]; } __attribute__ ((packed)); struct ieee80211_hdr_3addr { - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; - u16 seq_ctl; + __le16 seq_ctl; u8 payload[0]; } __attribute__ ((packed)); struct ieee80211_hdr_4addr { - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; - u16 seq_ctl; + __le16 seq_ctl; u8 addr4[ETH_ALEN]; u8 payload[0]; } __attribute__ ((packed)); struct ieee80211_hdr_3addrqos { - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; - u16 seq_ctl; + __le16 seq_ctl; u8 payload[0]; - u16 qos_ctl; + __le16 qos_ctl; } __attribute__ ((packed)); struct ieee80211_hdr_4addrqos { - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; - u16 seq_ctl; + __le16 seq_ctl; u8 addr4[ETH_ALEN]; u8 payload[0]; - u16 qos_ctl; + __le16 qos_ctl; } __attribute__ ((packed)); struct ieee80211_info_element { @@ -600,7 +600,7 @@ struct ieee80211_auth { struct ieee80211_disassoc { struct ieee80211_hdr_3addr header; - u16 reason_code; + __le16 reason_code; struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); @@ -622,8 +622,8 @@ struct ieee80211_probe_response { struct ieee80211_assoc_request { struct ieee80211_hdr_3addr header; - u16 capability; - u16 listen_interval; + __le16 capability; + __le16 listen_interval; struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); @@ -648,8 +648,8 @@ struct ieee80211_txb { u8 encrypted; u8 rts_included; u8 reserved; - u16 frag_size; - u16 payload_size; + __le16 frag_size; + __le16 payload_size; struct sk_buff *fragments[0]; }; @@ -699,7 +699,7 @@ struct ieee80211_qos_information_element { struct ieee80211_qos_ac_parameter { u8 aci_aifsn; u8 ecw_min_max; - u16 tx_op_limit; + __le16 tx_op_limit; } __attribute__ ((packed)); struct ieee80211_qos_parameter_info { @@ -709,11 +709,11 @@ struct ieee80211_qos_parameter_info { } __attribute__ ((packed)); struct ieee80211_qos_parameters { - u16 cw_min[QOS_QUEUE_NUM]; - u16 cw_max[QOS_QUEUE_NUM]; + __le16 cw_min[QOS_QUEUE_NUM]; + __le16 cw_max[QOS_QUEUE_NUM]; u8 aifs[QOS_QUEUE_NUM]; u8 flag[QOS_QUEUE_NUM]; - u16 tx_op_limit[QOS_QUEUE_NUM]; + __le16 tx_op_limit[QOS_QUEUE_NUM]; } __attribute__ ((packed)); struct ieee80211_qos_data { -- GitLab From 9ba7e0d1579485ce231594651b39c169029f5d67 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:58:24 -0500 Subject: [PATCH 0082/1519] [PATCH] ieee80211: "extern inline" to "static inline" tree bce04549ce0a8239d8083d8da5c3d12f7e1aecd9 parent b15a5153d5f1c75d9435d5ce19b52287059d5d54 author Adrian Bunk 1125026386 -0500 committer James Ketrenos 1127313953 -0500 "extern inline" doesn't make much sense. Signed-off-by: Adrian Bunk Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 372a173d36df..9310b2e01d41 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -929,12 +929,12 @@ struct ieee80211_device { #define IEEE_G (1<<2) #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) -extern inline void *ieee80211_priv(struct net_device *dev) +static inline void *ieee80211_priv(struct net_device *dev) { return ((struct ieee80211_device *)netdev_priv(dev))->priv; } -extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) +static inline int ieee80211_is_empty_essid(const char *essid, int essid_len) { /* Single white space is for Linksys APs */ if (essid_len == 1 && essid[0] == ' ') @@ -950,7 +950,7 @@ extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) return 1; } -extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, +static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode) { /* @@ -977,7 +977,7 @@ extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, return 0; } -extern inline int ieee80211_get_hdrlen(u16 fc) +static inline int ieee80211_get_hdrlen(u16 fc) { int hdrlen = IEEE80211_3ADDR_LEN; u16 stype = WLAN_FC_GET_STYPE(fc); @@ -1005,7 +1005,7 @@ extern inline int ieee80211_get_hdrlen(u16 fc) return hdrlen; } -extern inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr) +static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr) { switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) { case IEEE80211_1ADDR_LEN: @@ -1070,12 +1070,12 @@ extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, union iwreq_data *wrqu, char *extra); #endif -extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee) +static inline void ieee80211_increment_scans(struct ieee80211_device *ieee) { ieee->scans++; } -extern inline int ieee80211_get_scans(struct ieee80211_device *ieee) +static inline int ieee80211_get_scans(struct ieee80211_device *ieee) { return ieee->scans; } -- GitLab From 42c94e43be27f8b9be9b5be491bae8af05e54dbd Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:58:29 -0500 Subject: [PATCH 0083/1519] [PATCH] ieee80211: Type-o, capbility definition for QoS, and ERP parsing tree 3ac0dd07b9972dfd68fee47ec2152d3d378de000 parent 9ada1d971d9829c34a14d98840080b7e69fdff6b author Mohamed Abbad 1126054379 -0500 committer James Ketrenos 1127314340 -0500 Type-o, capbility definition for QoS, and ERP parsing Added WLAN_CAPABILITY_QOS Fixed type-o WLAN_CAPABILITY_OSSS_OFDM -> WLAN_CAPABILITY_DSSS_OFDM Added ERP IE parsing to ieee80211_rx Added handle_probe_request callback. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 7 ++++++- net/ieee80211/ieee80211_rx.c | 25 ++++++++++++++++++++++++- 2 files changed, 30 insertions(+), 2 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 9310b2e01d41..931737eec6c6 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -225,8 +225,9 @@ struct ieee80211_snap_hdr { #define WLAN_CAPABILITY_PBCC (1<<6) #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) +#define WLAN_CAPABILITY_QOS (1<<9) #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) -#define WLAN_CAPABILITY_OSSS_OFDM (1<<13) +#define WLAN_CAPABILITY_DSSS_OFDM (1<<13) /* Status codes */ enum ieee80211_statuscode { @@ -756,6 +757,7 @@ struct ieee80211_network { u16 beacon_interval; u16 listen_interval; u16 atim_window; + u8 erp_value; u8 wpa_ie[MAX_WPA_IE_LEN]; size_t wpa_ie_len; u8 rsn_ie[MAX_WPA_IE_LEN]; @@ -910,6 +912,9 @@ struct ieee80211_device { int (*handle_probe_response) (struct net_device * dev, struct ieee80211_probe_response * resp, struct ieee80211_network * network); + int (*handle_probe_request) (struct net_device * dev, + struct ieee80211_probe_request * req, + struct ieee80211_rx_stats * stats); int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response * resp, struct ieee80211_network * network); diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 2c4613527dfd..8bcdbabae3a1 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -1065,6 +1065,8 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i network->ssid_len = 0; network->flags = 0; network->atim_window = 0; + network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ? + 0x3 : 0x0; if (stats->freq == IEEE80211_52GHZ_BAND) { /* for A band (No DS info) */ @@ -1178,8 +1180,16 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i IEEE80211_DEBUG_SCAN("MFIE_TYPE_TIM: ignored\n"); break; + case MFIE_TYPE_ERP_INFO: + network->erp_value = info_element->data[0]; + IEEE80211_DEBUG_SCAN("MFIE_TYPE_ERP_SET: %d\n", + network->erp_value); + break; + case MFIE_TYPE_IBSS_SET: - IEEE80211_DEBUG_SCAN("MFIE_TYPE_IBSS_SET: ignored\n"); + network->atim_window = info_element->data[0]; + IEEE80211_DEBUG_SCAN("MFIE_TYPE_IBSS_SET: %d\n", + network->atim_window); break; case MFIE_TYPE_CHALLENGE: @@ -1290,6 +1300,7 @@ static inline void update_network(struct ieee80211_network *dst, dst->beacon_interval = src->beacon_interval; dst->listen_interval = src->listen_interval; dst->atim_window = src->atim_window; + dst->erp_value = src->erp_value; memcpy(dst->wpa_ie, src->wpa_ie, src->wpa_ie_len); dst->wpa_ie_len = src->wpa_ie_len; @@ -1471,6 +1482,18 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee, (header->frame_ctl))); break; + case IEEE80211_STYPE_PROBE_REQ: + IEEE80211_DEBUG_MGMT("recieved auth (%d)\n", + WLAN_FC_GET_STYPE(le16_to_cpu + (header->frame_ctl))); + + if (ieee->handle_probe_request != NULL) + ieee->handle_probe_request(ieee->dev, + (struct + ieee80211_probe_request *) + header, stats); + break; + case IEEE80211_STYPE_PROBE_RESP: IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n", WLAN_FC_GET_STYPE(le16_to_cpu -- GitLab From ccd0fda3a6d9186d067893114f65b8df758d5a1f Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:58:32 -0500 Subject: [PATCH 0084/1519] [PATCH] ieee80211: Mixed PTK/GTK CCMP/TKIP support tree 5c7559a1216ae1121487f6aed94a6017490729b3 parent c1ff4c22e5622c8987bf96c09158c4924cde98c2 author Hong Liu 1125482767 +0800 committer James Ketrenos 1127314427 -0500 Mixed PTK/GTK CCMP/TKIP support. Signed-off-by: Hong Liu Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 3 +++ net/ieee80211/ieee80211_module.c | 2 ++ net/ieee80211/ieee80211_rx.c | 5 +++-- net/ieee80211/ieee80211_wx.c | 13 ++++++++++--- 4 files changed, 18 insertions(+), 5 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 931737eec6c6..ef85a96fce49 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -851,6 +851,9 @@ struct ieee80211_device { int host_encrypt; int host_encrypt_msdu; int host_decrypt; + /* host performs multicast decryption */ + int host_mc_decrypt; + int host_open_frag; int ieee802_1x; /* is IEEE 802.1X used */ diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index dddc61647390..941f1a13fafa 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -133,6 +133,8 @@ struct net_device *alloc_ieee80211(int sizeof_priv) /* Default to enabling full open WEP with host based encrypt/decrypt */ ieee->host_encrypt = 1; ieee->host_decrypt = 1; + ieee->host_mc_decrypt = 1; + /* Host fragementation in Open mode. Default is enabled. * Note: host fragmentation is always enabled if host encryption * is enabled. For cards can do hardware encryption, they must do diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 8bcdbabae3a1..65315bcd6e0a 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -409,7 +409,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, return 1; } - if (ieee->host_decrypt) { + if (is_multicast_ether_addr(hdr->addr1) ? ieee->host_mc_decrypt : + ieee->host_decrypt) { int idx = 0; if (skb->len >= hdrlen + 3) idx = skb->data[hdrlen + 3] >> 6; @@ -1066,7 +1067,7 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i network->flags = 0; network->atim_window = 0; network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ? - 0x3 : 0x0; + 0x3 : 0x0; if (stats->freq == IEEE80211_52GHZ_BAND) { /* for A band (No DS info) */ diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index db66217699d5..d710f47c4bd5 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -493,6 +493,7 @@ int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, struct iw_point *encoding = &wrqu->encoding; struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; int i, idx, ret = 0; + int group_key = 0; const char *alg, *module; struct ieee80211_crypto_ops *ops; struct ieee80211_crypt_data **crypt; @@ -509,9 +510,10 @@ int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, } else idx = ieee->tx_keyidx; - if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) + if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) { crypt = &ieee->crypt[idx]; - else { + group_key = 1; + } else { if (idx != 0) return -EINVAL; if (ieee->iw_mode == IW_MODE_INFRA) @@ -542,7 +544,9 @@ int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, sec.enabled = 1; sec.encrypt = 1; - if (!(ieee->host_encrypt || ieee->host_decrypt)) + if (group_key ? !ieee->host_mc_decrypt : + !(ieee->host_encrypt || ieee->host_decrypt || + ieee->host_encrypt_msdu)) goto skip_host_crypt; switch (ext->alg) { @@ -632,6 +636,9 @@ int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, sec.flags |= SEC_LEVEL; sec.level = SEC_LEVEL_3; } + /* Don't set sec level for group keys. */ + if (group_key) + sec.flags &= ~SEC_LEVEL; } done: if (ieee->set_security) -- GitLab From 7dc888fefc053996354ca40602159e0ce5669f86 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:58:38 -0500 Subject: [PATCH 0085/1519] [PATCH] ieee80211: Keep auth mode unchanged after iwconfig key off/on cycle tree 2e6f6e7dc4f4eeb8e3dc265020016dd53e40578a parent ba2075794a089430b3dd7c90ff46ce1b67e9c7cc author Zhu Yi 1125551043 +0800 committer James Ketrenos 1127314475 -0500 [Bug 768] Keep auth mode unchanged after iwconfig key off/on cycle. Signed-off-by: Zhu Yi Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_wx.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index d710f47c4bd5..65aa96da730d 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -412,11 +412,15 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, sec.flags |= SEC_ACTIVE_KEY; } } - ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED); - sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY; - sec.flags |= SEC_AUTH_MODE; - IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ? - "OPEN" : "SHARED KEY"); + if (erq->flags & (IW_ENCODE_OPEN | IW_ENCODE_RESTRICTED)) { + ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED); + sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : + WLAN_AUTH_SHARED_KEY; + sec.flags |= SEC_AUTH_MODE; + IEEE80211_DEBUG_WX("Auth: %s\n", + sec.auth_mode == WLAN_AUTH_OPEN ? + "OPEN" : "SHARED KEY"); + } /* For now we just support WEP, so only set that security level... * TODO: When WPA is added this is one place that needs to change */ -- GitLab From ebeaddcc02fd47d1dbb7f25318d046461d90e4af Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:58:43 -0500 Subject: [PATCH 0086/1519] [PATCH] ieee80211: Updated copyright dates tree 0d3e41e574fcb41b9da7f0b7e1d27ec350726654 parent dbe2885fe2f454d538eaaabefc741ded1026f476 author James Ketrenos 1126720499 -0500 committer James Ketrenos 1127314531 -0500 Updated copyright dates. NOTE: This is a split out of just the copyright updates from patch 24/29 in the prior series. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 2 +- net/ieee80211/ieee80211_module.c | 2 +- net/ieee80211/ieee80211_rx.c | 2 +- net/ieee80211/ieee80211_tx.c | 2 +- net/ieee80211/ieee80211_wx.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index ef85a96fce49..53809482a7e4 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -11,7 +11,7 @@ * * Adaption to a generic IEEE 802.11 stack by James Ketrenos * - * Copyright (c) 2004, Intel Corporation + * Copyright (c) 2004-2005, Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 941f1a13fafa..0ae91c9917cf 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -1,6 +1,6 @@ /******************************************************************************* - Copyright(c) 2004 Intel Corporation. All rights reserved. + Copyright(c) 2004-2005 Intel Corporation. All rights reserved. Portions of this file are based on the WEP enablement code provided by the Host AP project hostap-drivers v0.1.3 diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 65315bcd6e0a..256d5524445c 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -5,7 +5,7 @@ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen * * Copyright (c) 2002-2003, Jouni Malinen - * Copyright (c) 2004, Intel Corporation + * Copyright (c) 2004-2005, Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index aba72f9880a1..24ade5f68e02 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of version 2 of the GNU General Public License as diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index 65aa96da730d..e28648e70cf1 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -1,6 +1,6 @@ /****************************************************************************** - Copyright(c) 2004 Intel Corporation. All rights reserved. + Copyright(c) 2004-2005 Intel Corporation. All rights reserved. Portions of this file are based on the WEP enablement code provided by the Host AP project hostap-drivers v0.1.3 -- GitLab From d041674d62e1ad565f2fb6d53ae80b31d6656033 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:49 -0500 Subject: [PATCH 0087/1519] [PATCH] ieee80211: Updated hostap to be compatible with ieee80211_hdr changes tree 8ec97d9056ceaf0f845ed51175dd842b700baadd parent 329128457008ace3110c96971addf85a767dd5af author James Ketrenos 1126714484 -0500 committer James Ketrenos 1127316636 -0500 Updated hostap to be compatible with ieee80211_hdr changes. Change accomplished via: for i in hostap_ap.{c,h} hostap_80211_{t,r}x.c; do sed -i -e "s:ieee80211_hdr\([^_]\):ieee80211_hdr_4addr\1:g" \ drivers/net/wireless/hostap/$i done CC: Jouni Malinen Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_80211_rx.c | 40 +++++------ drivers/net/wireless/hostap/hostap_80211_tx.c | 20 +++--- drivers/net/wireless/hostap/hostap_ap.c | 66 +++++++++---------- drivers/net/wireless/hostap/hostap_ap.h | 6 +- 4 files changed, 66 insertions(+), 66 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index b0501243b175..42e61c68c325 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -6,10 +6,10 @@ void hostap_dump_rx_80211(const char *name, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; printk(KERN_DEBUG "%s: RX signal=%d noise=%d rate=%d len=%d " "jiffies=%ld\n", @@ -51,7 +51,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, int hdrlen, phdrlen, head_need, tail_need; u16 fc; int prism_header, ret; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; iface = netdev_priv(dev); local = iface->local; @@ -70,7 +70,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, phdrlen = 0; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) { @@ -215,7 +215,7 @@ prism2_frag_cache_find(local_info_t *local, unsigned int seq, /* Called only as a tasklet (software IRQ) */ static struct sk_buff * -prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) +prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr_4addr *hdr) { struct sk_buff *skb = NULL; u16 sc; @@ -229,7 +229,7 @@ prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) if (frag == 0) { /* Reserve enough space to fit maximum frame length */ skb = dev_alloc_skb(local->dev->mtu + - sizeof(struct ieee80211_hdr) + + sizeof(struct ieee80211_hdr_4addr) + 8 /* LLC */ + 2 /* alignment */ + 8 /* WEP */ + ETH_ALEN /* WDS */); @@ -267,7 +267,7 @@ prism2_frag_cache_get(local_info_t *local, struct ieee80211_hdr *hdr) /* Called only as a tasklet (software IRQ) */ static int prism2_frag_cache_invalidate(local_info_t *local, - struct ieee80211_hdr *hdr) + struct ieee80211_hdr_4addr *hdr) { u16 sc; unsigned int seq; @@ -441,7 +441,7 @@ hostap_rx_frame_mgmt(local_info_t *local, struct sk_buff *skb, u16 stype) { if (local->iw_mode == IW_MODE_MASTER) { - hostap_update_sta_ps(local, (struct ieee80211_hdr *) + hostap_update_sta_ps(local, (struct ieee80211_hdr_4addr *) skb->data); } @@ -520,7 +520,7 @@ static inline struct net_device *prism2_rx_get_wds(local_info_t *local, static inline int -hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr *hdr, +hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr_4addr *hdr, u16 fc, struct net_device **wds) { /* FIX: is this really supposed to accept WDS frames only in Master @@ -579,13 +579,13 @@ static int hostap_is_eapol_frame(local_info_t *local, struct sk_buff *skb) { struct net_device *dev = local->dev; u16 fc, ethertype; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u8 *pos; if (skb->len < 24) return 0; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); /* check that the frame is unicast frame to us */ @@ -619,13 +619,13 @@ static inline int hostap_rx_frame_decrypt(local_info_t *local, struct sk_buff *skb, struct ieee80211_crypt_data *crypt) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; int res, hdrlen; if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL) return 0; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); if (local->tkip_countermeasures && @@ -658,13 +658,13 @@ static inline int hostap_rx_frame_decrypt_msdu(local_info_t *local, struct sk_buff *skb, int keyidx, struct ieee80211_crypt_data *crypt) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; int res, hdrlen; if (crypt == NULL || crypt->ops->decrypt_msdu == NULL) return 0; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; hdrlen = hostap_80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); atomic_inc(&crypt->refcnt); @@ -689,7 +689,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, { struct hostap_interface *iface; local_info_t *local; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; size_t hdrlen; u16 fc, type, stype, sc; struct net_device *wds = NULL; @@ -716,7 +716,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, dev = local->ddev; iface = netdev_priv(dev); - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; stats = hostap_get_stats(dev); if (skb->len < 10) @@ -889,7 +889,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, if (local->host_decrypt && (fc & IEEE80211_FCTL_PROTECTED) && (keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0) goto rx_dropped; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; /* skb: hdr + (possibly fragmented) plaintext payload */ @@ -941,7 +941,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, /* this was the last fragment and the frame will be * delivered, so remove skb from fragment cache */ skb = frag_skb; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; prism2_frag_cache_invalidate(local, hdr); } @@ -952,7 +952,7 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, hostap_rx_frame_decrypt_msdu(local, skb, keyidx, crypt)) goto rx_dropped; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !local->open_wep) { if (local->ieee_802_1x && hostap_is_eapol_frame(local, skb)) { diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c index 6358015f6526..6db45430288c 100644 --- a/drivers/net/wireless/hostap/hostap_80211_tx.c +++ b/drivers/net/wireless/hostap/hostap_80211_tx.c @@ -1,9 +1,9 @@ void hostap_dump_tx_80211(const char *name, struct sk_buff *skb) { - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; printk(KERN_DEBUG "%s: TX len=%d jiffies=%ld\n", name, skb->len, jiffies); @@ -41,7 +41,7 @@ int hostap_data_start_xmit(struct sk_buff *skb, struct net_device *dev) struct hostap_interface *iface; local_info_t *local; int need_headroom, need_tailroom = 0; - struct ieee80211_hdr hdr; + struct ieee80211_hdr_4addr hdr; u16 fc, ethertype = 0; enum { WDS_NO = 0, WDS_OWN_FRAME, WDS_COMPLIANT_FRAME @@ -244,7 +244,7 @@ int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev) struct hostap_interface *iface; local_info_t *local; struct hostap_skb_tx_data *meta; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; iface = netdev_priv(dev); @@ -266,7 +266,7 @@ int hostap_mgmt_start_xmit(struct sk_buff *skb, struct net_device *dev) meta->iface = iface; if (skb->len >= IEEE80211_DATA_HDR3_LEN + sizeof(rfc1042_header) + 2) { - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA && WLAN_FC_GET_STYPE(fc) == IEEE80211_STYPE_DATA) { @@ -289,7 +289,7 @@ struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, { struct hostap_interface *iface; local_info_t *local; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; int hdr_len, res; @@ -303,7 +303,7 @@ struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, if (local->tkip_countermeasures && crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) { - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; if (net_ratelimit()) { printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " "TX packet to " MACSTR "\n", @@ -325,7 +325,7 @@ struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, return NULL; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); hdr_len = hostap_80211_get_hdrlen(fc); @@ -360,7 +360,7 @@ int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev) ap_tx_ret tx_ret; struct hostap_skb_tx_data *meta; int no_encrypt = 0; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; iface = netdev_priv(dev); local = iface->local; @@ -403,7 +403,7 @@ int hostap_master_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_ret = hostap_handle_sta_tx(local, &tx); skb = tx.skb; meta = (struct hostap_skb_tx_data *) skb->cb; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); switch (tx_ret) { case AP_TX_CONTINUE: diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 930cef8367f2..070f7032edb5 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -591,14 +591,14 @@ static void hostap_ap_tx_cb(struct sk_buff *skb, int ok, void *data) { struct ap_data *ap = data; u16 fc; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; if (!ap->local->hostapd || !ap->local->apdev) { dev_kfree_skb(skb); return; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); /* Pass the TX callback frame to the hostapd; use 802.11 header version @@ -623,7 +623,7 @@ static void hostap_ap_tx_cb_auth(struct sk_buff *skb, int ok, void *data) { struct ap_data *ap = data; struct net_device *dev = ap->local->dev; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc, *pos, auth_alg, auth_transaction, status; struct sta_info *sta = NULL; char *txt = NULL; @@ -633,7 +633,7 @@ static void hostap_ap_tx_cb_auth(struct sk_buff *skb, int ok, void *data) return; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_MGMT || WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_AUTH || @@ -692,7 +692,7 @@ static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) { struct ap_data *ap = data; struct net_device *dev = ap->local->dev; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc, *pos, status; struct sta_info *sta = NULL; char *txt = NULL; @@ -702,7 +702,7 @@ static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) return; } - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (WLAN_FC_GET_TYPE(fc) != IEEE80211_FTYPE_MGMT || (WLAN_FC_GET_STYPE(fc) != IEEE80211_STYPE_ASSOC_RESP && @@ -757,12 +757,12 @@ static void hostap_ap_tx_cb_assoc(struct sk_buff *skb, int ok, void *data) static void hostap_ap_tx_cb_poll(struct sk_buff *skb, int ok, void *data) { struct ap_data *ap = data; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; struct sta_info *sta; if (skb->len < 24) goto fail; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; if (ok) { spin_lock(&ap->sta_table_lock); sta = ap_get_sta(ap, hdr->addr1); @@ -918,7 +918,7 @@ static void prism2_send_mgmt(struct net_device *dev, { struct hostap_interface *iface; local_info_t *local; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; u16 fc; struct sk_buff *skb; struct hostap_skb_tx_data *meta; @@ -944,7 +944,7 @@ static void prism2_send_mgmt(struct net_device *dev, fc = type_subtype; hdrlen = hostap_80211_get_hdrlen(fc); - hdr = (struct ieee80211_hdr *) skb_put(skb, hdrlen); + hdr = (struct ieee80211_hdr_4addr *) skb_put(skb, hdrlen); if (body) memcpy(skb_put(skb, body_len), body, body_len); @@ -1285,7 +1285,7 @@ static void handle_authen(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; size_t hdrlen; struct ap_data *ap = local->ap; char body[8 + WLAN_AUTH_CHALLENGE_LEN], *challenge = NULL; @@ -1498,7 +1498,7 @@ static void handle_assoc(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats, int reassoc) { struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; char body[12], *p, *lpos; int len, left; u16 *pos; @@ -1705,7 +1705,7 @@ static void handle_deauth(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; char *body = (char *) (skb->data + IEEE80211_MGMT_HDR_LEN); int len; u16 reason_code, *pos; @@ -1746,7 +1746,7 @@ static void handle_disassoc(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { struct net_device *dev = local->dev; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; char *body = skb->data + IEEE80211_MGMT_HDR_LEN; int len; u16 reason_code, *pos; @@ -1784,7 +1784,7 @@ static void handle_disassoc(local_info_t *local, struct sk_buff *skb, /* Called only as a scheduled task for pending AP frames. */ static void ap_handle_data_nullfunc(local_info_t *local, - struct ieee80211_hdr *hdr) + struct ieee80211_hdr_4addr *hdr) { struct net_device *dev = local->dev; @@ -1801,7 +1801,7 @@ static void ap_handle_data_nullfunc(local_info_t *local, /* Called only as a scheduled task for pending AP frames. */ static void ap_handle_dropped_data(local_info_t *local, - struct ieee80211_hdr *hdr) + struct ieee80211_hdr_4addr *hdr) { struct net_device *dev = local->dev; struct sta_info *sta; @@ -1860,7 +1860,7 @@ static void pspoll_send_buffered(local_info_t *local, struct sta_info *sta, /* Called only as a scheduled task for pending AP frames. */ static void handle_pspoll(local_info_t *local, - struct ieee80211_hdr *hdr, + struct ieee80211_hdr_4addr *hdr, struct hostap_80211_rx_status *rx_stats) { struct net_device *dev = local->dev; @@ -1979,7 +1979,7 @@ static void handle_wds_oper_queue(void *data) static void handle_beacon(local_info_t *local, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *) skb->data; char *body = skb->data + IEEE80211_MGMT_HDR_LEN; int len, left; u16 *pos, beacon_int, capability; @@ -2137,11 +2137,11 @@ static void handle_ap_item(local_info_t *local, struct sk_buff *skb, struct net_device *dev = local->dev; #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ u16 fc, type, stype; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; /* FIX: should give skb->len to handler functions and check that the * buffer is long enough */ - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); type = WLAN_FC_GET_TYPE(fc); stype = WLAN_FC_GET_STYPE(fc); @@ -2258,7 +2258,7 @@ void hostap_rx(struct net_device *dev, struct sk_buff *skb, struct hostap_interface *iface; local_info_t *local; u16 fc; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; iface = netdev_priv(dev); local = iface->local; @@ -2268,7 +2268,7 @@ void hostap_rx(struct net_device *dev, struct sk_buff *skb, local->stats.rx_packets++; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); if (local->ap->ap_policy == AP_OTHER_AP_SKIP_ALL && @@ -2289,7 +2289,7 @@ void hostap_rx(struct net_device *dev, struct sk_buff *skb, static void schedule_packet_send(local_info_t *local, struct sta_info *sta) { struct sk_buff *skb; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; struct hostap_80211_rx_status rx_stats; if (skb_queue_empty(&sta->tx_buf)) @@ -2302,7 +2302,7 @@ static void schedule_packet_send(local_info_t *local, struct sta_info *sta) return; } - hdr = (struct ieee80211_hdr *) skb_put(skb, 16); + hdr = (struct ieee80211_hdr_4addr *) skb_put(skb, 16); /* Generate a fake pspoll frame to start packet delivery */ hdr->frame_ctl = __constant_cpu_to_le16( @@ -2685,7 +2685,7 @@ ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx) struct sta_info *sta = NULL; struct sk_buff *skb = tx->skb; int set_tim, ret; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; struct hostap_skb_tx_data *meta; meta = (struct hostap_skb_tx_data *) skb->cb; @@ -2694,7 +2694,7 @@ ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx) meta->iface->type == HOSTAP_INTERFACE_STA) goto out; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; if (hdr->addr1[0] & 0x01) { /* broadcast/multicast frame - no AP related processing */ @@ -2821,10 +2821,10 @@ void hostap_handle_sta_release(void *ptr) void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb) { struct sta_info *sta; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; struct hostap_skb_tx_data *meta; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; meta = (struct hostap_skb_tx_data *) skb->cb; spin_lock(&local->ap->sta_table_lock); @@ -2892,7 +2892,7 @@ static void hostap_update_sta_ps2(local_info_t *local, struct sta_info *sta, /* Called only as a tasklet (software IRQ). Called for each RX frame to update * STA power saving state. pwrmgt is a flag from 802.11 frame_ctl field. */ -int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr) +int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr_4addr *hdr) { struct sta_info *sta; u16 fc; @@ -2925,12 +2925,12 @@ ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, int ret; struct sta_info *sta; u16 fc, type, stype; - struct ieee80211_hdr *hdr; + struct ieee80211_hdr_4addr *hdr; if (local->ap == NULL) return AP_RX_CONTINUE; - hdr = (struct ieee80211_hdr *) skb->data; + hdr = (struct ieee80211_hdr_4addr *) skb->data; fc = le16_to_cpu(hdr->frame_ctl); type = WLAN_FC_GET_TYPE(fc); @@ -3058,7 +3058,7 @@ ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, /* Called only as a tasklet (software IRQ) */ int hostap_handle_sta_crypto(local_info_t *local, - struct ieee80211_hdr *hdr, + struct ieee80211_hdr_4addr *hdr, struct ieee80211_crypt_data **crypt, void **sta_ptr) { @@ -3160,7 +3160,7 @@ int hostap_add_sta(struct ap_data *ap, u8 *sta_addr) /* Called only as a tasklet (software IRQ) */ int hostap_update_rx_stats(struct ap_data *ap, - struct ieee80211_hdr *hdr, + struct ieee80211_hdr_4addr *hdr, struct hostap_80211_rx_status *rx_stats) { struct sta_info *sta; diff --git a/drivers/net/wireless/hostap/hostap_ap.h b/drivers/net/wireless/hostap/hostap_ap.h index 816a52bcea8f..6d00df69c2e3 100644 --- a/drivers/net/wireless/hostap/hostap_ap.h +++ b/drivers/net/wireless/hostap/hostap_ap.h @@ -233,7 +233,7 @@ struct hostap_tx_data { ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx); void hostap_handle_sta_release(void *ptr); void hostap_handle_sta_tx_exc(local_info_t *local, struct sk_buff *skb); -int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr *hdr); +int hostap_update_sta_ps(local_info_t *local, struct ieee80211_hdr_4addr *hdr); typedef enum { AP_RX_CONTINUE, AP_RX_DROP, AP_RX_EXIT, AP_RX_CONTINUE_NOT_AUTHORIZED } ap_rx_ret; @@ -241,13 +241,13 @@ ap_rx_ret hostap_handle_sta_rx(local_info_t *local, struct net_device *dev, struct sk_buff *skb, struct hostap_80211_rx_status *rx_stats, int wds); -int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr *hdr, +int hostap_handle_sta_crypto(local_info_t *local, struct ieee80211_hdr_4addr *hdr, struct ieee80211_crypt_data **crypt, void **sta_ptr); int hostap_is_sta_assoc(struct ap_data *ap, u8 *sta_addr); int hostap_is_sta_authorized(struct ap_data *ap, u8 *sta_addr); int hostap_add_sta(struct ap_data *ap, u8 *sta_addr); -int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr *hdr, +int hostap_update_rx_stats(struct ap_data *ap, struct ieee80211_hdr_4addr *hdr, struct hostap_80211_rx_status *rx_stats); void hostap_update_rates(local_info_t *local); void hostap_add_wds_links(local_info_t *local); -- GitLab From 5bfc819b53ed67c76f33f969ab627070e85d87c1 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 12:23:51 -0500 Subject: [PATCH 0088/1519] [PATCH] ieee80211: Updated hostap to be compatible with extra_prefix_len changes tree 8c1676c8a15c08e6d4c718fc7cd42d9bf4cd8235 parent 0ccc3dd6469ed492578c184f47dde2baccde3593 author James Ketrenos 1126715240 -0500 committer James Ketrenos 1127316717 -0500 Updated hostap to be compatible with extra_prefix_len changes. Accomplished via: for i in hostap_ap.c hostap_80211_tx.c; do sed -i -e "s:\([.>]\)extra_prefix_len:\1extra_mpdu_prefix_len:g" \ -e "s:\([.>]\)extra_postfix_len:\1extra_mpdu_postfix_len:g" \ drivers/net/wireless/hostap/$i done CC: Jouni Malinen Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_80211_tx.c | 8 ++++---- drivers/net/wireless/hostap/hostap_ap.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c index 6db45430288c..9d24f8a38ac5 100644 --- a/drivers/net/wireless/hostap/hostap_80211_tx.c +++ b/drivers/net/wireless/hostap/hostap_80211_tx.c @@ -317,10 +317,10 @@ struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, if (skb == NULL) return NULL; - if ((skb_headroom(skb) < crypt->ops->extra_prefix_len || - skb_tailroom(skb) < crypt->ops->extra_postfix_len) && - pskb_expand_head(skb, crypt->ops->extra_prefix_len, - crypt->ops->extra_postfix_len, GFP_ATOMIC)) { + if ((skb_headroom(skb) < crypt->ops->extra_mpdu_prefix_len || + skb_tailroom(skb) < crypt->ops->extra_mpdu_postfix_len) && + pskb_expand_head(skb, crypt->ops->extra_mpdu_prefix_len, + crypt->ops->extra_mpdu_postfix_len, GFP_ATOMIC)) { kfree_skb(skb); return NULL; } diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 070f7032edb5..087d9269af34 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -1256,14 +1256,14 @@ static char * ap_auth_make_challenge(struct ap_data *ap) } skb = dev_alloc_skb(WLAN_AUTH_CHALLENGE_LEN + - ap->crypt->extra_prefix_len + - ap->crypt->extra_postfix_len); + ap->crypt->extra_mpdu_prefix_len + + ap->crypt->extra_mpdu_postfix_len); if (skb == NULL) { kfree(tmpbuf); return NULL; } - skb_reserve(skb, ap->crypt->extra_prefix_len); + skb_reserve(skb, ap->crypt->extra_mpdu_prefix_len); memset(skb_put(skb, WLAN_AUTH_CHALLENGE_LEN), 0, WLAN_AUTH_CHALLENGE_LEN); if (ap->crypt->encrypt_mpdu(skb, 0, ap->crypt_priv)) { @@ -1272,7 +1272,7 @@ static char * ap_auth_make_challenge(struct ap_data *ap) return NULL; } - memcpy(tmpbuf, skb->data + ap->crypt->extra_prefix_len, + memcpy(tmpbuf, skb->data + ap->crypt->extra_mpdu_prefix_len, WLAN_AUTH_CHALLENGE_LEN); dev_kfree_skb(skb); -- GitLab From 9a01c16bd49071b2e7904d222cae71d5f8bf6bb5 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 14:33:32 -0500 Subject: [PATCH 0089/1519] [PATCH] ieee82011: Remove WIRELESS_EXT ifdefs Remove old WIRELESS_EXT version compatibility In-tree doesn't need to maintain backward compatibility. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 2 -- net/ieee80211/ieee80211_crypt_tkip.c | 23 ----------------------- net/ieee80211/ieee80211_wx.c | 2 -- 3 files changed, 27 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 53809482a7e4..61a23d38b429 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -1069,14 +1069,12 @@ extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee, extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *key); -#if WIRELESS_EXT > 17 extern int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *extra); extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *extra); -#endif static inline void ieee80211_increment_scans(struct ieee80211_device *ieee) { diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c index f973d6cb8248..21022f195bab 100644 --- a/net/ieee80211/ieee80211_crypt_tkip.c +++ b/net/ieee80211/ieee80211_crypt_tkip.c @@ -515,7 +515,6 @@ static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len, return 0; } -#if WIRELESS_EXT >= 18 static void ieee80211_michael_mic_failure(struct net_device *dev, struct ieee80211_hdr_4addr *hdr, int keyidx) @@ -536,28 +535,6 @@ static void ieee80211_michael_mic_failure(struct net_device *dev, wrqu.data.length = sizeof(ev); wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *)&ev); } -#elif WIRELESS_EXT >= 15 -static void ieee80211_michael_mic_failure(struct net_device *dev, - struct ieee80211_hdr_4addr *hdr, - int keyidx) -{ - union iwreq_data wrqu; - char buf[128]; - - /* TODO: needed parameters: count, keyid, key type, TSC */ - sprintf(buf, "MLME-MICHAELMICFAILURE.indication(keyid=%d %scast addr=" - MAC_FMT ")", keyidx, hdr->addr1[0] & 0x01 ? "broad" : "uni", - MAC_ARG(hdr->addr2)); - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf); -} -#else /* WIRELESS_EXT >= 15 */ -static inline void ieee80211_michael_mic_failure(struct net_device *dev, struct ieee80211_hdr_4addr - *hdr, int keyidx) -{ -} -#endif /* WIRELESS_EXT >= 15 */ static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx, int hdr_len, void *priv) diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index e28648e70cf1..3dd2bbae0c24 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -488,7 +488,6 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee, return 0; } -#if WIRELESS_EXT > 17 int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) @@ -722,7 +721,6 @@ int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, EXPORT_SYMBOL(ieee80211_wx_set_encodeext); EXPORT_SYMBOL(ieee80211_wx_get_encodeext); -#endif EXPORT_SYMBOL(ieee80211_wx_get_scan); EXPORT_SYMBOL(ieee80211_wx_set_encode); -- GitLab From 8a4ae7f2e24bf99b61082ca45de8e54e70300b9d Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Wed, 21 Sep 2005 23:22:10 -0400 Subject: [PATCH 0090/1519] forcedeth: add hardware tx checksumming Recent forcedeth nics support checksum offloading for tx. The attached patch, written by Ayaz Abdulla, adds the support to the driver. It also cleans up the handling of the three dma ring entry formats that are supported by the driver. Signed-off-By: Manfred Spraul Signed-off-By: Jeff Garzik --- drivers/net/forcedeth.c | 71 +++++++++++++++++++++++++---------------- 1 file changed, 44 insertions(+), 27 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 6e042ecf6965..e5f480203675 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -95,6 +95,7 @@ * of nv_remove * 0.42: 06 Aug 2005: Fix lack of link speed initialization * in the second (and later) nv_open call + * 0.43: 10 Aug 2005: Add support for tx checksum. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -106,7 +107,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.41" +#define FORCEDETH_VERSION "0.43" #define DRV_NAME "forcedeth" #include @@ -145,6 +146,7 @@ #define DEV_NEED_LINKTIMER 0x0002 /* poll link settings. Relies on the timer irq */ #define DEV_HAS_LARGEDESC 0x0004 /* device supports jumbo frames and needs packet format 2 */ #define DEV_HAS_HIGH_DMA 0x0008 /* device supports 64bit dma */ +#define DEV_HAS_CHECKSUM 0x0010 /* device supports tx and rx checksum offloads */ enum { NvRegIrqStatus = 0x000, @@ -241,6 +243,9 @@ enum { #define NVREG_TXRXCTL_IDLE 0x0008 #define NVREG_TXRXCTL_RESET 0x0010 #define NVREG_TXRXCTL_RXCHECK 0x0400 +#define NVREG_TXRXCTL_DESC_1 0 +#define NVREG_TXRXCTL_DESC_2 0x02100 +#define NVREG_TXRXCTL_DESC_3 0x02200 NvRegMIIStatus = 0x180, #define NVREG_MIISTAT_ERROR 0x0001 #define NVREG_MIISTAT_LINKCHANGE 0x0008 @@ -335,6 +340,8 @@ typedef union _ring_type { /* error and valid are the same for both */ #define NV_TX2_ERROR (1<<30) #define NV_TX2_VALID (1<<31) +#define NV_TX2_CHECKSUM_L3 (1<<27) +#define NV_TX2_CHECKSUM_L4 (1<<26) #define NV_RX_DESCRIPTORVALID (1<<16) #define NV_RX_MISSEDFRAME (1<<17) @@ -417,14 +424,14 @@ typedef union _ring_type { /* * desc_ver values: - * This field has two purposes: - * - Newer nics uses a different ring layout. The layout is selected by - * comparing np->desc_ver with DESC_VER_xy. - * - It contains bits that are forced on when writing to NvRegTxRxControl. + * The nic supports three different descriptor types: + * - DESC_VER_1: Original + * - DESC_VER_2: support for jumbo frames. + * - DESC_VER_3: 64-bit format. */ -#define DESC_VER_1 0x0 -#define DESC_VER_2 (0x02100|NVREG_TXRXCTL_RXCHECK) -#define DESC_VER_3 (0x02200|NVREG_TXRXCTL_RXCHECK) +#define DESC_VER_1 1 +#define DESC_VER_2 2 +#define DESC_VER_3 3 /* PHY defines */ #define PHY_OUI_MARVELL 0x5043 @@ -491,6 +498,7 @@ struct fe_priv { u32 orig_mac[2]; u32 irqmask; u32 desc_ver; + u32 txrxctl_bits; void __iomem *base; @@ -786,10 +794,10 @@ static void nv_txrx_reset(struct net_device *dev) u8 __iomem *base = get_hwbase(dev); dprintk(KERN_DEBUG "%s: nv_txrx_reset\n", dev->name); - writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->desc_ver, base + NvRegTxRxControl); + writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->txrxctl_bits, base + NvRegTxRxControl); pci_push(base); udelay(NV_TXRX_RESET_DELAY); - writel(NVREG_TXRXCTL_BIT2 | np->desc_ver, base + NvRegTxRxControl); + writel(NVREG_TXRXCTL_BIT2 | np->txrxctl_bits, base + NvRegTxRxControl); pci_push(base); } @@ -961,6 +969,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct fe_priv *np = get_nvpriv(dev); int nr = np->next_tx % TX_RING; + u32 tx_checksum = (skb->ip_summed == CHECKSUM_HW ? (NV_TX2_CHECKSUM_L3|NV_TX2_CHECKSUM_L4) : 0); np->tx_skbuff[nr] = skb; np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data,skb->len, @@ -976,10 +985,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_lock_irq(&np->lock); wmb(); if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags ); + np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags | tx_checksum); else - np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags ); - dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission.\n", + np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags | tx_checksum); + dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission\n", dev->name, np->next_tx); { int j; @@ -997,7 +1006,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) if (np->next_tx - np->nic_tx >= TX_LIMIT_STOP) netif_stop_queue(dev); spin_unlock_irq(&np->lock); - writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl); + writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl); pci_push(get_hwbase(dev)); return 0; } @@ -1408,7 +1417,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu) writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT), base + NvRegRingSizes); pci_push(base); - writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl); + writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl); pci_push(base); /* restart rx engine */ @@ -2115,9 +2124,9 @@ static int nv_open(struct net_device *dev) /* 5) continue setup */ writel(np->linkspeed, base + NvRegLinkSpeed); writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3); - writel(np->desc_ver, base + NvRegTxRxControl); + writel(np->txrxctl_bits, base + NvRegTxRxControl); pci_push(base); - writel(NVREG_TXRXCTL_BIT1|np->desc_ver, base + NvRegTxRxControl); + writel(NVREG_TXRXCTL_BIT1|np->txrxctl_bits, base + NvRegTxRxControl); reg_delay(dev, NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31, NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX, KERN_INFO "open: SetupReg5, Bit 31 remained off\n"); @@ -2315,18 +2324,26 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n", pci_name(pci_dev)); } + np->txrxctl_bits = NVREG_TXRXCTL_DESC_3; } else if (id->driver_data & DEV_HAS_LARGEDESC) { /* packet format 2: supports jumbo frames */ np->desc_ver = DESC_VER_2; + np->txrxctl_bits = NVREG_TXRXCTL_DESC_2; } else { /* original packet format */ np->desc_ver = DESC_VER_1; + np->txrxctl_bits = NVREG_TXRXCTL_DESC_1; } np->pkt_limit = NV_PKTLIMIT_1; if (id->driver_data & DEV_HAS_LARGEDESC) np->pkt_limit = NV_PKTLIMIT_2; + if (id->driver_data & DEV_HAS_CHECKSUM) { + np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK; + dev->features |= NETIF_F_HW_CSUM; + } + err = -ENOMEM; np->base = ioremap(addr, NV_PCI_REGSZ); if (!np->base) @@ -2527,35 +2544,35 @@ static struct pci_device_id pci_tbl[] = { }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM, }, { /* nForce3 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM, }, { /* CK804 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* CK804 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* MCP04 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* MCP04 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* MCP51 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12), @@ -2567,11 +2584,11 @@ static struct pci_device_id pci_tbl[] = { }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, { /* MCP55 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA, }, {0,}, }; -- GitLab From 31696160c7415b5a7efa650c7f1ca5c9623f5d8f Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:58:46 -0500 Subject: [PATCH 0091/1519] [PATCH] ieee80211: Added subsystem version string and reporting via MODULE_VERSION tree c1b50ac5d2d1f9b727c39c6bd86a7872f25a1127 parent 1bb997a3ac7dd1941e02426d2f70bd28993a82b7 author James Ketrenos 1126720779 -0500 committer James Ketrenos 1127314674 -0500 Added subsystem version string and reporting via MODULE_VERSION and pritnk during load. NOTE: This is the version support split out from patch 24/29 of the prior series. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 7 +++++++ net/ieee80211/ieee80211_module.c | 24 ++++++++++++++++++------ 2 files changed, 25 insertions(+), 6 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 61a23d38b429..4a1340b8341c 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -17,6 +17,11 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. See README and COPYING for * more details. + * + * API Version History + * 1.0.x -- Initial version + * 1.1.x -- Added radiotap, QoS, TIM, ieee80211_geo APIs, + * various structure changes, and crypto API init method */ #ifndef IEEE80211_H #define IEEE80211_H @@ -24,6 +29,8 @@ #include /* ARRAY_SIZE */ #include +#define IEEE80211_VERSION "git-1.1.5" + #define IEEE80211_DATA_LEN 2304 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section 6.2.1.1.2. diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 0ae91c9917cf..319312564167 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -53,13 +53,16 @@ #include -MODULE_DESCRIPTION("802.11 data/management/control stack"); -MODULE_AUTHOR - ("Copyright (C) 2004 Intel Corporation "); +#define DRV_DESCRIPTION "802.11 data/management/control stack" +#define DRV_NAME "ieee80211" +#define DRV_VERSION IEEE80211_VERSION +#define DRV_COPYRIGHT "Copyright (C) 2004-2005 Intel Corporation " + +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -#define DRV_NAME "ieee80211" - static inline int ieee80211_networks_allocate(struct ieee80211_device *ieee) { if (ieee->networks) @@ -220,9 +223,11 @@ static int store_debug_level(struct file *file, const char __user * buffer, return strnlen(buf, len); } +#endif /* CONFIG_IEEE80211_DEBUG */ static int __init ieee80211_init(void) { +#ifdef CONFIG_IEEE80211_DEBUG struct proc_dir_entry *e; ieee80211_debug_level = debug; @@ -242,26 +247,33 @@ static int __init ieee80211_init(void) e->read_proc = show_debug_level; e->write_proc = store_debug_level; e->data = NULL; +#endif /* CONFIG_IEEE80211_DEBUG */ + + printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); + printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); return 0; } static void __exit ieee80211_exit(void) { +#ifdef CONFIG_IEEE80211_DEBUG if (ieee80211_proc) { remove_proc_entry("debug_level", ieee80211_proc); remove_proc_entry(DRV_NAME, proc_net); ieee80211_proc = NULL; } +#endif /* CONFIG_IEEE80211_DEBUG */ } +#ifdef CONFIG_IEEE80211_DEBUG #include module_param(debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); +#endif /* CONFIG_IEEE80211_DEBUG */ module_exit(ieee80211_exit); module_init(ieee80211_init); -#endif const char *escape_essid(const char *essid, u8 essid_len) { -- GitLab From 31b59eaee8f8ec29d8cb6ac0c8eed086689d8030 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:58:49 -0500 Subject: [PATCH 0092/1519] [PATCH] ieee80211: Added handle_deauth() callback, enhanced tkip/ccmp support of varying hw/sw offload tree de81b55e78e85997642c651ea677078d0554a14f parent c8030da8c159f8b82712172a6748a42523aea83a author James Ketrenos 1127104380 -0500 committer James Ketrenos 1127315225 -0500 Added handle_deauth() callback. Enhanced crypt_{tkip,ccmp} to support varying splits of HW/SW offload. Changed channel freq to u32 from u16. Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 5 ++- include/net/ieee80211_crypt.h | 2 + net/ieee80211/ieee80211_crypt_ccmp.c | 41 +++++++++++++------ net/ieee80211/ieee80211_crypt_tkip.c | 60 +++++++++++++++++++--------- net/ieee80211/ieee80211_rx.c | 6 +++ net/ieee80211/ieee80211_tx.c | 18 ++++++++- 6 files changed, 99 insertions(+), 33 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 4a1340b8341c..220a9e3c91fa 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -808,7 +808,7 @@ enum { }; struct ieee80211_channel { - u16 freq; + u32 freq; u8 channel; u8 flags; u8 max_power; @@ -862,6 +862,7 @@ struct ieee80211_device { int host_mc_decrypt; int host_open_frag; + int host_build_iv; int ieee802_1x; /* is IEEE 802.1X used */ /* WPA data */ @@ -914,6 +915,8 @@ struct ieee80211_device { /* Typical STA methods */ int (*handle_auth) (struct net_device * dev, struct ieee80211_auth * auth); + int (*handle_deauth) (struct net_device * dev, + struct ieee80211_auth * auth); int (*handle_disassoc) (struct net_device * dev, struct ieee80211_disassoc * assoc); int (*handle_beacon) (struct net_device * dev, diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index 24e4912a263a..daf3b2c6b038 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -36,6 +36,8 @@ struct ieee80211_crypto_ops { /* deinitialize crypto context and free allocated private data */ void (*deinit) (void *priv); + int (*build_iv) (struct sk_buff * skb, int hdr_len, void *priv); + /* encrypt/decrypt return < 0 on error or >= 0 on success. The return * value from decrypt_mpdu is passed as the keyidx value for * decrypt_msdu. skb must have enough head and tail room for the diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c index a3dc5712b98b..081d8575dbb1 100644 --- a/net/ieee80211/ieee80211_crypt_ccmp.c +++ b/net/ieee80211/ieee80211_crypt_ccmp.c @@ -191,26 +191,18 @@ static void ccmp_init_blocks(struct crypto_tfm *tfm, ieee80211_ccmp_aes_encrypt(tfm, b0, s0); } -static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv) +static int ieee80211_ccmp_hdr(struct sk_buff *skb, int hdr_len, void *priv) { struct ieee80211_ccmp_data *key = priv; - int data_len, i, blocks, last, len; - u8 *pos, *mic; - struct ieee80211_hdr_4addr *hdr; - u8 *b0 = key->tx_b0; - u8 *b = key->tx_b; - u8 *e = key->tx_e; - u8 *s0 = key->tx_s0; + int i; + u8 *pos; - if (skb_headroom(skb) < CCMP_HDR_LEN || - skb_tailroom(skb) < CCMP_MIC_LEN || skb->len < hdr_len) + if (skb_headroom(skb) < CCMP_HDR_LEN || skb->len < hdr_len) return -1; - data_len = skb->len - hdr_len; pos = skb_push(skb, CCMP_HDR_LEN); memmove(pos, pos + CCMP_HDR_LEN, hdr_len); pos += hdr_len; - mic = skb_put(skb, CCMP_MIC_LEN); i = CCMP_PN_LEN - 1; while (i >= 0) { @@ -229,6 +221,30 @@ static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv) *pos++ = key->tx_pn[1]; *pos++ = key->tx_pn[0]; + return CCMP_HDR_LEN; +} + +static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv) +{ + struct ieee80211_ccmp_data *key = priv; + int data_len, i, blocks, last, len; + u8 *pos, *mic; + struct ieee80211_hdr_4addr *hdr; + u8 *b0 = key->tx_b0; + u8 *b = key->tx_b; + u8 *e = key->tx_e; + u8 *s0 = key->tx_s0; + + if (skb_tailroom(skb) < CCMP_MIC_LEN || skb->len < hdr_len) + return -1; + + data_len = skb->len - hdr_len; + len = ieee80211_ccmp_hdr(skb, hdr_len, priv); + if (len < 0) + return -1; + + pos = skb->data + hdr_len + CCMP_HDR_LEN; + mic = skb_put(skb, CCMP_MIC_LEN); hdr = (struct ieee80211_hdr_4addr *)skb->data; ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0); @@ -429,6 +445,7 @@ static struct ieee80211_crypto_ops ieee80211_crypt_ccmp = { .name = "CCMP", .init = ieee80211_ccmp_init, .deinit = ieee80211_ccmp_deinit, + .build_iv = ieee80211_ccmp_hdr, .encrypt_mpdu = ieee80211_ccmp_encrypt, .decrypt_mpdu = ieee80211_ccmp_decrypt, .encrypt_msdu = NULL, diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c index 21022f195bab..e0733050ae71 100644 --- a/net/ieee80211/ieee80211_crypt_tkip.c +++ b/net/ieee80211/ieee80211_crypt_tkip.c @@ -260,35 +260,27 @@ static void tkip_mixing_phase2(u8 * WEPSeed, const u8 * TK, const u16 * TTAK, #endif } -static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) +static u8 *ieee80211_tkip_hdr(struct sk_buff *skb, int hdr_len, void *priv) { struct ieee80211_tkip_data *tkey = priv; int len; - u8 rc4key[16], *pos, *icv; + u8 *rc4key, *pos, *icv; struct ieee80211_hdr_4addr *hdr; u32 crc; - struct scatterlist sg; hdr = (struct ieee80211_hdr_4addr *)skb->data; - if (tkey->ieee->tkip_countermeasures) { - if (net_ratelimit()) { - printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " - "TX packet to " MAC_FMT "\n", - tkey->ieee->dev->name, MAC_ARG(hdr->addr1)); - } - return -1; - } - - if (skb_headroom(skb) < 8 || skb_tailroom(skb) < 4 || - skb->len < hdr_len) - return -1; + if (skb_headroom(skb) < 8 || skb->len < hdr_len) + return NULL; if (!tkey->tx_phase1_done) { tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2, tkey->tx_iv32); tkey->tx_phase1_done = 1; } + rc4key = kmalloc(16, GFP_ATOMIC); + if (!rc4key) + return NULL; tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16); len = skb->len - hdr_len; @@ -297,9 +289,9 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) pos += hdr_len; icv = skb_put(skb, 4); - *pos++ = rc4key[0]; - *pos++ = rc4key[1]; - *pos++ = rc4key[2]; + *pos++ = *rc4key; + *pos++ = *(rc4key + 1); + *pos++ = *(rc4key + 2); *pos++ = (tkey->key_idx << 6) | (1 << 5) /* Ext IV included */ ; *pos++ = tkey->tx_iv32 & 0xff; *pos++ = (tkey->tx_iv32 >> 8) & 0xff; @@ -312,6 +304,38 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) icv[2] = crc >> 16; icv[3] = crc >> 24; + return rc4key; +} + +static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) +{ + struct ieee80211_tkip_data *tkey = priv; + int len; + const u8 *rc4key; + u8 *pos; + struct scatterlist sg; + + if (tkey->ieee->tkip_countermeasures) { + if (net_ratelimit()) { + struct ieee80211_hdr_4addr *hdr = + (struct ieee80211_hdr_4addr *)skb->data; + printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + "TX packet to " MAC_FMT "\n", + tkey->ieee->dev->name, MAC_ARG(hdr->addr1)); + } + return -1; + } + + if (skb_tailroom(skb) < 4 || skb->len < hdr_len) + return -1; + + len = skb->len - hdr_len; + pos = skb->data + hdr_len; + + rc4key = ieee80211_tkip_hdr(skb, hdr_len, priv); + if (!rc4key) + return -1; + crypto_cipher_setkey(tkey->tfm_arc4, rc4key, 16); sg.page = virt_to_page(pos); sg.offset = offset_in_page(pos); diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 256d5524445c..fcf05bf677b8 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -1534,6 +1534,12 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee, header); break; + case IEEE80211_STYPE_DEAUTH: + printk("DEAUTH from AP\n"); + if (ieee->handle_deauth != NULL) + ieee->handle_deauth(ieee->dev, (struct ieee80211_auth *) + header); + break; default: IEEE80211_DEBUG_MGMT("received UNKNOWN (%d)\n", WLAN_FC_GET_STYPE(le16_to_cpu diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 24ade5f68e02..8d87897d7eb7 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -227,7 +227,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) rts_required; unsigned long flags; struct net_device_stats *stats = &ieee->stats; - int ether_type, encrypt, host_encrypt, host_encrypt_msdu; + int ether_type, encrypt, host_encrypt, host_encrypt_msdu, host_build_iv; int bytes, fc, hdr_len; struct sk_buff *skb_frag; struct ieee80211_hdr_3addr header = { /* Ensure zero initialized */ @@ -263,8 +263,10 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) && ieee->sec.encrypt; + host_encrypt = ieee->host_encrypt && encrypt; host_encrypt_msdu = ieee->host_encrypt_msdu && encrypt; + host_build_iv = ieee->host_build_iv && encrypt; if (!encrypt && ieee->ieee802_1x && ieee->drop_unencrypted && ether_type != ETH_P_PAE) { @@ -310,8 +312,10 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) int len = bytes + hdr_len + crypt->ops->extra_msdu_prefix_len + crypt->ops->extra_msdu_postfix_len; struct sk_buff *skb_new = dev_alloc_skb(len); + if (unlikely(!skb_new)) goto failed; + skb_reserve(skb_new, crypt->ops->extra_msdu_prefix_len); memcpy(skb_put(skb_new, hdr_len), &header, hdr_len); snapped = 1; @@ -418,7 +422,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) for (; i < nr_frags; i++) { skb_frag = txb->fragments[i]; - if (host_encrypt) + if (host_encrypt || host_build_iv) skb_reserve(skb_frag, crypt->ops->extra_mpdu_prefix_len); @@ -453,6 +457,16 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) * to insert the IV between the header and the payload */ if (host_encrypt) ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len); + else if (host_build_iv) { + struct ieee80211_crypt_data *crypt; + + crypt = ieee->crypt[ieee->tx_keyidx]; + atomic_inc(&crypt->refcnt); + if (crypt->ops->build_iv) + crypt->ops->build_iv(skb_frag, hdr_len, + crypt->priv); + atomic_dec(&crypt->refcnt); + } if (ieee->config & (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) -- GitLab From e5658d3e8a347f4393a9403b0cec8d43fa6214b1 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Wed, 21 Sep 2005 11:58:56 -0500 Subject: [PATCH 0093/1519] [PATCH] ieee80211: added IE comments, reason_code to reason, removed info_element from ieee80211_disassoc tree 0254e7c97cece038cd11b47a16027c6379e464fe parent a84f7713dc87ca1b51c6d53b391087663425a080 author James Ketrenos 1126661324 -0500 committer James Ketrenos 1127319069 -0500 Updated based on Michael Wu's patch and comments sent to netdev. Added IE comments to ieee80211_* frame structures. Changed reason_code to reason (consistency) Removed info_element from ieee80211_disassoc Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 220a9e3c91fa..4a381a074fdd 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -603,17 +603,21 @@ struct ieee80211_auth { __le16 algorithm; __le16 transaction; __le16 status; + /* challenge */ struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); struct ieee80211_disassoc { struct ieee80211_hdr_3addr header; - __le16 reason_code; - struct ieee80211_info_element info_element[0]; + __le16 reason; } __attribute__ ((packed)); +/* Alias deauth for disassoc */ +#define ieee82011_deauth ieee80211_disassoc + struct ieee80211_probe_request { struct ieee80211_hdr_3addr header; + /* SSID, supported rates */ struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); @@ -622,6 +626,8 @@ struct ieee80211_probe_response { u32 time_stamp[2]; __le16 beacon_interval; __le16 capability; + /* SSID, supported rates, FH params, DS params, + * CF params, IBSS params, TIM (if beacon), RSN */ struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); @@ -632,6 +638,7 @@ struct ieee80211_assoc_request { struct ieee80211_hdr_3addr header; __le16 capability; __le16 listen_interval; + /* SSID, supported rates, RSN */ struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); @@ -648,7 +655,8 @@ struct ieee80211_assoc_response { __le16 capability; __le16 status; __le16 aid; - struct ieee80211_info_element info_element[0]; /* supported rates */ + /* supported rates */ + struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); struct ieee80211_txb { -- GitLab From 6eb6edf04acd09e3cea09456913e8da59323b89e Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Thu, 22 Sep 2005 10:34:15 +0000 Subject: [PATCH 0094/1519] [PATCH] ieee80211: in-tree driver updates to sync with latest ieee80211 series Changed crypto method from requiring a struct ieee80211_device reference to the init handler. Instead we now have a get/set flags method for each crypto component. Setting of TKIP countermeasures can now be done via set_flags(IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- include/net/ieee80211.h | 1 - include/net/ieee80211_crypt.h | 10 +++++++- net/ieee80211/ieee80211_crypt.c | 3 +-- net/ieee80211/ieee80211_crypt_ccmp.c | 2 +- net/ieee80211/ieee80211_crypt_tkip.c | 34 ++++++++++++++++++++-------- net/ieee80211/ieee80211_crypt_wep.c | 2 +- net/ieee80211/ieee80211_module.c | 1 - net/ieee80211/ieee80211_wx.c | 4 ++-- 8 files changed, 38 insertions(+), 19 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 4a381a074fdd..4851756202c5 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -876,7 +876,6 @@ struct ieee80211_device { /* WPA data */ int wpa_enabled; int drop_unencrypted; - int tkip_countermeasures; int privacy_invoked; size_t wpa_ie_len; u8 *wpa_ie; diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index daf3b2c6b038..0c9d859d912e 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -25,13 +25,17 @@ #include +enum { + IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1<<0), +}; + struct ieee80211_crypto_ops { const char *name; /* init new crypto context (e.g., allocate private data space, * select IV, etc.); returns NULL on failure or pointer to allocated * private data on success */ - void *(*init) (struct ieee80211_device * ieee, int keyidx); + void *(*init) (int keyidx); /* deinitialize crypto context and free allocated private data */ void (*deinit) (void *priv); @@ -60,6 +64,10 @@ struct ieee80211_crypto_ops { * statistics */ char *(*print_stats) (char *p, void *priv); + /* Crypto specific flag get/set for configuration settings */ + unsigned long (*get_flags)(void *priv); + unsigned long (*set_flags)(unsigned long flags, void *priv); + /* maximum number of bytes added by encryption; encrypt buf is * allocated with extra_prefix_len bytes, copy of in_buf, and * extra_postfix_len; encrypt need not use all this space, but diff --git a/net/ieee80211/ieee80211_crypt.c b/net/ieee80211/ieee80211_crypt.c index e26bcc918032..f3b6aa3be638 100644 --- a/net/ieee80211/ieee80211_crypt.c +++ b/net/ieee80211/ieee80211_crypt.c @@ -202,8 +202,7 @@ struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name) return NULL; } -static void *ieee80211_crypt_null_init(struct ieee80211_device *ieee, - int keyidx) +static void *ieee80211_crypt_null_init(int keyidx) { return (void *)1; } diff --git a/net/ieee80211/ieee80211_crypt_ccmp.c b/net/ieee80211/ieee80211_crypt_ccmp.c index 081d8575dbb1..05a853c13012 100644 --- a/net/ieee80211/ieee80211_crypt_ccmp.c +++ b/net/ieee80211/ieee80211_crypt_ccmp.c @@ -74,7 +74,7 @@ static void ieee80211_ccmp_aes_encrypt(struct crypto_tfm *tfm, crypto_cipher_encrypt(tfm, &dst, &src, AES_BLOCK_LEN); } -static void *ieee80211_ccmp_init(struct ieee80211_device *ieee, int key_idx) +static void *ieee80211_ccmp_init(int key_idx) { struct ieee80211_ccmp_data *priv; diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c index e0733050ae71..2e34f29b7956 100644 --- a/net/ieee80211/ieee80211_crypt_tkip.c +++ b/net/ieee80211/ieee80211_crypt_tkip.c @@ -60,10 +60,24 @@ struct ieee80211_tkip_data { /* scratch buffers for virt_to_page() (crypto API) */ u8 rx_hdr[16], tx_hdr[16]; - struct ieee80211_device *ieee; + unsigned long flags; }; -static void *ieee80211_tkip_init(struct ieee80211_device *ieee, int key_idx) +static unsigned long ieee80211_tkip_set_flags(unsigned long flags, void *priv) +{ + struct ieee80211_tkip_data *_priv = priv; + unsigned long old_flags = _priv->flags; + _priv->flags = flags; + return old_flags; +} + +static unsigned long ieee80211_tkip_get_flags(void *priv) +{ + struct ieee80211_tkip_data *_priv = priv; + return _priv->flags; +} + +static void *ieee80211_tkip_init(int key_idx) { struct ieee80211_tkip_data *priv; @@ -72,8 +86,6 @@ static void *ieee80211_tkip_init(struct ieee80211_device *ieee, int key_idx) goto fail; memset(priv, 0, sizeof(*priv)); - priv->ieee = ieee; - priv->key_idx = key_idx; priv->tfm_arc4 = crypto_alloc_tfm("arc4", 0); @@ -315,13 +327,13 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) u8 *pos; struct scatterlist sg; - if (tkey->ieee->tkip_countermeasures) { + if (tkey->flags & IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) { if (net_ratelimit()) { struct ieee80211_hdr_4addr *hdr = (struct ieee80211_hdr_4addr *)skb->data; - printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + printk(KERN_DEBUG "TKIP countermeasures: dropped " "TX packet to " MAC_FMT "\n", - tkey->ieee->dev->name, MAC_ARG(hdr->addr1)); + MAC_ARG(hdr->addr1)); } return -1; } @@ -366,11 +378,11 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv) hdr = (struct ieee80211_hdr_4addr *)skb->data; - if (tkey->ieee->tkip_countermeasures) { + if (tkey->flags & IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) { if (net_ratelimit()) { - printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " + printk(KERN_DEBUG "TKIP countermeasures: dropped " "received packet from " MAC_FMT "\n", - tkey->ieee->dev->name, MAC_ARG(hdr->addr2)); + MAC_ARG(hdr->addr2)); } return -1; } @@ -694,6 +706,8 @@ static struct ieee80211_crypto_ops ieee80211_crypt_tkip = { .extra_mpdu_prefix_len = 4 + 4, /* IV + ExtIV */ .extra_mpdu_postfix_len = 4, /* ICV */ .extra_msdu_postfix_len = 8, /* MIC */ + .get_flags = ieee80211_tkip_get_flags, + .set_flags = ieee80211_tkip_set_flags, .owner = THIS_MODULE, }; diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c index 2aaeac1e02d7..7c08ed2f2628 100644 --- a/net/ieee80211/ieee80211_crypt_wep.c +++ b/net/ieee80211/ieee80211_crypt_wep.c @@ -37,7 +37,7 @@ struct prism2_wep_data { struct crypto_tfm *tfm; }; -static void *prism2_wep_init(struct ieee80211_device *ieee, int keyidx) +static void *prism2_wep_init(int keyidx) { struct prism2_wep_data *priv; diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 319312564167..5714692e82b4 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -155,7 +155,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv) spin_lock_init(&ieee->lock); ieee->wpa_enabled = 0; - ieee->tkip_countermeasures = 0; ieee->drop_unencrypted = 0; ieee->privacy_invoked = 0; diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index 3dd2bbae0c24..ee7a70a13250 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -355,7 +355,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, } if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) - new_crypt->priv = new_crypt->ops->init(ieee, key); + new_crypt->priv = new_crypt->ops->init(key); if (!new_crypt->ops || !new_crypt->priv) { kfree(new_crypt); @@ -598,7 +598,7 @@ int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ops; if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) - new_crypt->priv = new_crypt->ops->init(ieee, idx); + new_crypt->priv = new_crypt->ops->init(idx); if (new_crypt->priv == NULL) { kfree(new_crypt); ret = -EINVAL; -- GitLab From af9288a707b609cdb1069cfe5bde0d6567c12c31 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Thu, 22 Sep 2005 15:43:07 -0400 Subject: [PATCH 0095/1519] ieee80211: update orinoco, wl3501 drivers for latest struct naming --- drivers/net/wireless/orinoco.c | 2 +- drivers/net/wireless/wl3501.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 77e93a225530..fc2fa4dc3a08 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -636,7 +636,7 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) /* Read the frame header */ err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(struct hermes_tx_descriptor) + - sizeof(struct ieee80211_hdr), + sizeof(struct ieee80211_hdr_4addr), fid, 0); hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h index 7fcbe589c3f2..4303c50c2ab6 100644 --- a/drivers/net/wireless/wl3501.h +++ b/drivers/net/wireless/wl3501.h @@ -548,7 +548,7 @@ struct wl3501_80211_tx_plcp_hdr { struct wl3501_80211_tx_hdr { struct wl3501_80211_tx_plcp_hdr pclp_hdr; - struct ieee80211_hdr mac_hdr; + struct ieee80211_hdr_4addr mac_hdr; } __attribute__ ((packed)); /* -- GitLab From ef846bf04f4c9e1a68ab841e89931f8c26100874 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:07 -0400 Subject: [PATCH 0096/1519] [PATCH] orinoco: Remove inneeded system includes. Signed-off-by: Pavel Roskin Remove inneeded system includes. Most system includes are not needed. In particular, the hardware backends don't need anything network related. Some includes have been moved from local headers to the C files where they are actually used. Includes that have to be in the local headers are no longer from the C sources. Signed-off-by: Jeff Garzik --- drivers/net/wireless/airport.c | 19 +------------------ drivers/net/wireless/hermes.c | 11 ++--------- drivers/net/wireless/hermes.h | 3 +-- drivers/net/wireless/orinoco.c | 12 ------------ drivers/net/wireless/orinoco.h | 2 -- drivers/net/wireless/orinoco_cs.c | 16 +--------------- drivers/net/wireless/orinoco_nortel.c | 18 +----------------- drivers/net/wireless/orinoco_pci.c | 18 +----------------- drivers/net/wireless/orinoco_plx.c | 18 +----------------- drivers/net/wireless/orinoco_tmd.c | 18 +----------------- drivers/net/wireless/spectrum_cs.c | 16 +--------------- 11 files changed, 10 insertions(+), 141 deletions(-) diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c index 9d496703c465..7b321f7cf358 100644 --- a/drivers/net/wireless/airport.c +++ b/drivers/net/wireless/airport.c @@ -15,28 +15,11 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include +#include #include -#include -#include #include "orinoco.h" diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c index 21c3d0d227e6..eba0d9d2b7c5 100644 --- a/drivers/net/wireless/hermes.c +++ b/drivers/net/wireless/hermes.c @@ -39,17 +39,10 @@ */ #include - #include -#include -#include -#include -#include -#include -#include #include -#include -#include +#include +#include #include "hermes.h" diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index 8c9e874c9118..786613aaa58a 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -30,9 +30,8 @@ * access to the hermes_t structure, and to the hardware */ -#include #include -#include +#include /* * Limits and constants diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index fc2fa4dc3a08..f76fe3d10248 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -77,28 +77,16 @@ #define DRIVER_NAME "orinoco" #include - #include #include #include -#include -#include -#include -#include -#include #include -#include #include #include #include #include #include -#include -#include -#include - -#include "hermes.h" #include "hermes_rid.h" #include "orinoco.h" diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index c800563034a7..32530d435afb 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -9,8 +9,6 @@ #define DRIVER_VERSION "0.15rc2" -#include -#include #include #include #include diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 80920b1c6fcf..195c530f209f 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -14,30 +14,16 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include - +#include #include #include #include #include #include -#include -#include -#include - #include "orinoco.h" /********************************************************************/ diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c index 86fa58e5cfac..d48ec24539f1 100644 --- a/drivers/net/wireless/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco_nortel.c @@ -40,29 +40,13 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include - #include -#include "hermes.h" #include "orinoco.h" #define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c index 42e03438291b..5362c214fc8e 100644 --- a/drivers/net/wireless/orinoco_pci.c +++ b/drivers/net/wireless/orinoco_pci.c @@ -93,28 +93,12 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include - -#include -#include -#include -#include "hermes.h" #include "orinoco.h" /* All the magic there is from wlan-ng */ diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c index 7ab05b89fb3f..210e73776545 100644 --- a/drivers/net/wireless/orinoco_plx.c +++ b/drivers/net/wireless/orinoco_plx.c @@ -117,29 +117,13 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include - #include -#include "hermes.h" #include "orinoco.h" #define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */ diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c index 85893f42445b..5e68b7026186 100644 --- a/drivers/net/wireless/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco_tmd.c @@ -53,29 +53,13 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include -#include - #include -#include "hermes.h" #include "orinoco.h" #define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 63e00422d1a0..61199543aeb7 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -22,31 +22,17 @@ #define PFX DRIVER_NAME ": " #include - #include #include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include - #include #include #include #include #include -#include -#include -#include - #include "orinoco.h" static unsigned char *primsym; -- GitLab From 4c08202547111e503eca4031ae9443159a79e2b2 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH 0097/1519] [PATCH] orinoco: Make nortel_pci_hw_init() static. Signed-off-by: Pavel Roskin Make nortel_pci_hw_init() static. Found by sparse. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco_nortel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c index d48ec24539f1..d8afd51ff8a5 100644 --- a/drivers/net/wireless/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco_nortel.c @@ -92,7 +92,7 @@ static int nortel_pci_cor_reset(struct orinoco_private *priv) return 0; } -int nortel_pci_hw_init(struct nortel_pci_card *card) +static int nortel_pci_hw_init(struct nortel_pci_card *card) { int i; u32 reg; -- GitLab From f3cb4cc120177090b0ccc9fb20a12010de39ac8a Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH 0098/1519] [PATCH] orinoco: Fix memory leak and unneeded unlock in orinoco_join_ap() Signed-off-by: Pavel Roskin Fix memory leak and unneeded unlock in orinoco_join_ap() If orinoco_lock() fails, the code would still run orinoco_unlock(), instead of freeing the allocated memory. Found by sparse. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index f76fe3d10248..8b93b44291d4 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1046,7 +1046,7 @@ static void orinoco_join_ap(struct net_device *dev) return; if (orinoco_lock(priv, &flags) != 0) - goto out; + goto fail_lock; /* Sanity checks in case user changed something in the meantime */ if (! priv->bssid_fixed) @@ -1091,8 +1091,10 @@ static void orinoco_join_ap(struct net_device *dev) printk(KERN_ERR "%s: Error issuing join request\n", dev->name); out: - kfree(buf); orinoco_unlock(priv, &flags); + + fail_lock: + kfree(buf); } /* Send new BSSID to userspace */ -- GitLab From 8aeabc375041a5fe9c9be315472497b2e0547eed Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH 0099/1519] [PATCH] orinoco: orinoco_send_wevents() could return without unlocking. Signed-off-by: Pavel Roskin orinoco_send_wevents() could return without unlocking. Failure to read BSSID from the hardware would cause orinoco_send_wevents() to return with lock held. Found by sparse. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 8b93b44291d4..29cb5d81b67e 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1112,12 +1112,14 @@ static void orinoco_send_wevents(struct net_device *dev) err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, ETH_ALEN, NULL, wrqu.ap_addr.sa_data); if (err != 0) - return; + goto out; wrqu.ap_addr.sa_family = ARPHRD_ETHER; /* Send event to user space */ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); + + out: orinoco_unlock(priv, &flags); } -- GitLab From 393da59834eef526fc6fd0df321e94344d7c49e3 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH 0100/1519] [PATCH] orinoco: Remove unneeded forward declarations. Signed-off-by: Pavel Roskin Remove unneeded forward declarations. Also reorder struct pcmcia_driver initialization to keep attach and detach together. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco_cs.c | 15 +++------------ drivers/net/wireless/spectrum_cs.c | 15 +++------------ 2 files changed, 6 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 195c530f209f..dc1128a00971 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -80,17 +80,8 @@ static dev_link_t *dev_list; /* = NULL */ /* Function prototypes */ /********************************************************************/ -/* device methods */ -static int orinoco_cs_hard_reset(struct orinoco_private *priv); - -/* PCMCIA gumpf */ -static void orinoco_cs_config(dev_link_t * link); -static void orinoco_cs_release(dev_link_t * link); -static int orinoco_cs_event(event_t event, int priority, - event_callback_args_t * args); - -static dev_link_t *orinoco_cs_attach(void); -static void orinoco_cs_detach(dev_link_t *); +static void orinoco_cs_release(dev_link_t *link); +static void orinoco_cs_detach(dev_link_t *link); /********************************************************************/ /* Device methods */ @@ -675,8 +666,8 @@ static struct pcmcia_driver orinoco_driver = { .name = DRIVER_NAME, }, .attach = orinoco_cs_attach, - .event = orinoco_cs_event, .detach = orinoco_cs_detach, + .event = orinoco_cs_event, .id_table = orinoco_cs_ids, }; diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 61199543aeb7..ceed0241adcd 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -89,17 +89,8 @@ static dev_link_t *dev_list; /* = NULL */ /* Function prototypes */ /********************************************************************/ -/* device methods */ -static int spectrum_cs_hard_reset(struct orinoco_private *priv); - -/* PCMCIA gumpf */ -static void spectrum_cs_config(dev_link_t * link); -static void spectrum_cs_release(dev_link_t * link); -static int spectrum_cs_event(event_t event, int priority, - event_callback_args_t * args); - -static dev_link_t *spectrum_cs_attach(void); -static void spectrum_cs_detach(dev_link_t *); +static void spectrum_cs_release(dev_link_t *link); +static void spectrum_cs_detach(dev_link_t *link); /********************************************************************/ /* Firmware downloader */ @@ -1058,8 +1049,8 @@ static struct pcmcia_driver orinoco_driver = { .name = DRIVER_NAME, }, .attach = spectrum_cs_attach, - .event = spectrum_cs_event, .detach = spectrum_cs_detach, + .event = spectrum_cs_event, .id_table = spectrum_cs_ids, }; -- GitLab From d133ae4cd6a3c75c31b1630f906cc9979a11077f Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH 0101/1519] [PATCH] orinoco: Annotate endianess of variables and structure members. Signed-off-by: Pavel Roskin Annotate endianess of variables and structure members. Don't reuse variables for both host-endian and little-endian data. Minor comment changes in affected structures. Signed-off-by: Jeff Garzik --- drivers/net/wireless/hermes.h | 108 ++++++++++++++--------------- drivers/net/wireless/orinoco.c | 62 +++++++++-------- drivers/net/wireless/orinoco.h | 6 +- drivers/net/wireless/spectrum_cs.c | 20 +++--- 4 files changed, 99 insertions(+), 97 deletions(-) diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index 786613aaa58a..ad28e3294360 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -191,13 +191,13 @@ #define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ struct hermes_tx_descriptor { - u16 status; - u16 reserved1; - u16 reserved2; - u32 sw_support; + __le16 status; + __le16 reserved1; + __le16 reserved2; + __le32 sw_support; u8 retry_count; u8 tx_rate; - u16 tx_control; + __le16 tx_control; } __attribute__ ((packed)); #define HERMES_TXSTAT_RETRYERR (0x0001) @@ -221,60 +221,60 @@ struct hermes_tx_descriptor { #define HERMES_INQ_SEC_STAT_AGERE (0xF202) struct hermes_tallies_frame { - u16 TxUnicastFrames; - u16 TxMulticastFrames; - u16 TxFragments; - u16 TxUnicastOctets; - u16 TxMulticastOctets; - u16 TxDeferredTransmissions; - u16 TxSingleRetryFrames; - u16 TxMultipleRetryFrames; - u16 TxRetryLimitExceeded; - u16 TxDiscards; - u16 RxUnicastFrames; - u16 RxMulticastFrames; - u16 RxFragments; - u16 RxUnicastOctets; - u16 RxMulticastOctets; - u16 RxFCSErrors; - u16 RxDiscards_NoBuffer; - u16 TxDiscardsWrongSA; - u16 RxWEPUndecryptable; - u16 RxMsgInMsgFragments; - u16 RxMsgInBadMsgFragments; + __le16 TxUnicastFrames; + __le16 TxMulticastFrames; + __le16 TxFragments; + __le16 TxUnicastOctets; + __le16 TxMulticastOctets; + __le16 TxDeferredTransmissions; + __le16 TxSingleRetryFrames; + __le16 TxMultipleRetryFrames; + __le16 TxRetryLimitExceeded; + __le16 TxDiscards; + __le16 RxUnicastFrames; + __le16 RxMulticastFrames; + __le16 RxFragments; + __le16 RxUnicastOctets; + __le16 RxMulticastOctets; + __le16 RxFCSErrors; + __le16 RxDiscards_NoBuffer; + __le16 TxDiscardsWrongSA; + __le16 RxWEPUndecryptable; + __le16 RxMsgInMsgFragments; + __le16 RxMsgInBadMsgFragments; /* Those last are probably not available in very old firmwares */ - u16 RxDiscards_WEPICVError; - u16 RxDiscards_WEPExcluded; + __le16 RxDiscards_WEPICVError; + __le16 RxDiscards_WEPExcluded; } __attribute__ ((packed)); /* Grabbed from wlan-ng - Thanks Mark... - Jean II * This is the result of a scan inquiry command */ /* Structure describing info about an Access Point */ struct prism2_scan_apinfo { - u16 channel; /* Channel where the AP sits */ - u16 noise; /* Noise level */ - u16 level; /* Signal level */ + __le16 channel; /* Channel where the AP sits */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - u16 beacon_interv; /* Beacon interval */ - u16 capabilities; /* Capabilities */ - u16 essid_len; /* ESSID length */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ + __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ u8 rates[10]; /* Bit rate supported */ - u16 proberesp_rate; /* Data rate of the response frame */ - u16 atim; /* ATIM window time, Kus (hostscan only) */ + __le16 proberesp_rate; /* Data rate of the response frame */ + __le16 atim; /* ATIM window time, Kus (hostscan only) */ } __attribute__ ((packed)); /* Same stuff for the Lucent/Agere card. * Thanks to h1kari - Jean II */ struct agere_scan_apinfo { - u16 channel; /* Channel where the AP sits */ - u16 noise; /* Noise level */ - u16 level; /* Signal level */ + __le16 channel; /* Channel where the AP sits */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - u16 beacon_interv; /* Beacon interval */ - u16 capabilities; /* Capabilities */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ - u16 essid_len; /* ESSID length */ + __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ } __attribute__ ((packed)); @@ -282,16 +282,16 @@ struct agere_scan_apinfo { struct symbol_scan_apinfo { u8 channel; /* Channel where the AP sits */ u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */ - u16 noise; /* Noise level */ - u16 level; /* Signal level */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - u16 beacon_interv; /* Beacon interval */ - u16 capabilities; /* Capabilities */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ - u16 essid_len; /* ESSID length */ + __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ - u16 rates[5]; /* Bit rate supported */ - u16 basic_rates; /* Basic rates bitmask */ + __le16 rates[5]; /* Bit rate supported */ + __le16 basic_rates; /* Basic rates bitmask */ u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ } __attribute__ ((packed)); @@ -311,7 +311,7 @@ union hermes_scan_info { #define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) struct hermes_linkstatus { - u16 linkstatus; /* Link status */ + __le16 linkstatus; /* Link status */ } __attribute__ ((packed)); struct hermes_response { @@ -320,8 +320,8 @@ struct hermes_response { /* "ID" structure - used for ESSID and station nickname */ struct hermes_idstring { - u16 len; - u16 val[16]; + __le16 len; + __le16 val[16]; } __attribute__ ((packed)); struct hermes_multicast { @@ -446,7 +446,7 @@ static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) { - u16 rec; + __le16 rec; int err; err = HERMES_READ_RECORD(hw, bap, rid, &rec); @@ -456,7 +456,7 @@ static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word) { - u16 rec = cpu_to_le16(word); + __le16 rec = cpu_to_le16(word); return HERMES_WRITE_RECORD(hw, bap, rid, &rec); } diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 29cb5d81b67e..1ae301c62281 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -202,31 +202,32 @@ static struct { /********************************************************************/ /* Used in Event handling. - * We avoid nested structres as they break on ARM -- Moustafa */ + * We avoid nested structures as they break on ARM -- Moustafa */ struct hermes_tx_descriptor_802_11 { /* hermes_tx_descriptor */ - u16 status; - u16 reserved1; - u16 reserved2; - u32 sw_support; + __le16 status; + __le16 reserved1; + __le16 reserved2; + __le32 sw_support; u8 retry_count; u8 tx_rate; - u16 tx_control; + __le16 tx_control; - /* ieee802_11_hdr */ - u16 frame_ctl; - u16 duration_id; + /* ieee80211_hdr */ + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; - u16 seq_ctl; + __le16 seq_ctl; u8 addr4[ETH_ALEN]; - u16 data_len; + + __le16 data_len; /* ethhdr */ - unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ - unsigned char h_source[ETH_ALEN]; /* source ether addr */ - unsigned short h_proto; /* packet type ID field */ + u8 h_dest[ETH_ALEN]; /* destination eth addr */ + u8 h_source[ETH_ALEN]; /* source ether addr */ + __be16 h_proto; /* packet type ID field */ /* p8022_hdr */ u8 dsap; @@ -234,31 +235,31 @@ struct hermes_tx_descriptor_802_11 { u8 ctrl; u8 oui[3]; - u16 ethertype; + __be16 ethertype; } __attribute__ ((packed)); /* Rx frame header except compatibility 802.3 header */ struct hermes_rx_descriptor { /* Control */ - u16 status; - u32 time; + __le16 status; + __le32 time; u8 silence; u8 signal; u8 rate; u8 rxflow; - u32 reserved; + __le32 reserved; /* 802.11 header */ - u16 frame_ctl; - u16 duration_id; + __le16 frame_ctl; + __le16 duration_id; u8 addr1[ETH_ALEN]; u8 addr2[ETH_ALEN]; u8 addr3[ETH_ALEN]; - u16 seq_ctl; + __le16 seq_ctl; u8 addr4[ETH_ALEN]; /* Data length */ - u16 data_len; + __le16 data_len; } __attribute__ ((packed)); /********************************************************************/ @@ -389,7 +390,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) } } else { struct { - u16 qual, signal, noise; + __le16 qual, signal, noise; } __attribute__ ((packed)) cq; err = HERMES_READ_RECORD(hw, USER_BAP, @@ -615,6 +616,7 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) struct orinoco_private *priv = netdev_priv(dev); struct net_device_stats *stats = &priv->stats; u16 fid = hermes_read_regn(hw, TXCOMPLFID); + u16 status; struct hermes_tx_descriptor_802_11 hdr; int err = 0; @@ -644,8 +646,8 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) * exceeded, because that's the only status that really mean * that this particular node went away. * Other errors means that *we* screwed up. - Jean II */ - hdr.status = le16_to_cpu(hdr.status); - if (hdr.status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { + status = le16_to_cpu(hdr.status); + if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { union iwreq_data wrqu; /* Copy 802.11 dest address. @@ -1031,7 +1033,7 @@ static void orinoco_join_ap(struct net_device *dev) unsigned long flags; struct join_req { u8 bssid[ETH_ALEN]; - u16 channel; + __le16 channel; } __attribute__ ((packed)) req; const int atom_len = offsetof(struct prism2_scan_apinfo, atim); struct prism2_scan_apinfo *atom = NULL; @@ -1128,8 +1130,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) struct orinoco_private *priv = netdev_priv(dev); u16 infofid; struct { - u16 len; - u16 type; + __le16 len; + __le16 type; } __attribute__ ((packed)) info; int len, type; int err; @@ -3905,7 +3907,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev, HERMES_HOSTSCAN_SYMBOL_BCAST); break; case FIRMWARE_TYPE_INTERSIL: { - u16 req[3]; + __le16 req[3]; req[0] = cpu_to_le16(0x3fff); /* All channels */ req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ @@ -3979,7 +3981,7 @@ static inline int orinoco_translate_scan(struct net_device *dev, case FIRMWARE_TYPE_INTERSIL: offset = 4; if (priv->has_hostscan) { - atom_len = le16_to_cpup((u16 *)scan); + atom_len = le16_to_cpup((__le16 *)scan); /* Sanity check for atom_len */ if (atom_len < sizeof(struct prism2_scan_apinfo)) { printk(KERN_ERR "%s: Invalid atom_len in scan data: %d\n", diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 32530d435afb..6920ead11449 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -27,7 +27,7 @@ #define ORINOCO_MAX_KEYS 4 struct orinoco_key { - u16 len; /* always stored as little-endian */ + __le16 len; /* always stored as little-endian */ char data[ORINOCO_MAX_KEY_SIZE]; } __attribute__ ((packed)); @@ -35,14 +35,14 @@ struct header_struct { /* 802.3 */ u8 dest[ETH_ALEN]; u8 src[ETH_ALEN]; - u16 len; + __be16 len; /* 802.2 */ u8 dsap; u8 ssap; u8 ctrl; /* SNAP */ u8 oui[3]; - u16 ethertype; + unsigned short ethertype; } __attribute__ ((packed)); typedef enum { diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index ceed0241adcd..b1bbc8e8e91f 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -138,8 +138,8 @@ static void spectrum_cs_detach(dev_link_t *link); * Each block has the following structure. */ struct dblock { - u32 _addr; /* adapter address where to write the block */ - u16 _len; /* length of the data only, in bytes */ + __le32 _addr; /* adapter address where to write the block */ + __le16 _len; /* length of the data only, in bytes */ char data[0]; /* data to be written */ } __attribute__ ((packed)); @@ -149,9 +149,9 @@ struct dblock { * items with matching ID should be written. */ struct pdr { - u32 _id; /* record ID */ - u32 _addr; /* adapter address where to write the data */ - u32 _len; /* expected length of the data, in bytes */ + __le32 _id; /* record ID */ + __le32 _addr; /* adapter address where to write the data */ + __le32 _len; /* expected length of the data, in bytes */ char next[0]; /* next PDR starts here */ } __attribute__ ((packed)); @@ -162,8 +162,8 @@ struct pdr { * be plugged into the secondary firmware. */ struct pdi { - u16 _len; /* length of ID and data, in words */ - u16 _id; /* record ID */ + __le16 _len; /* length of ID and data, in words */ + __le16 _id; /* record ID */ char data[0]; /* plug data */ } __attribute__ ((packed));; @@ -370,7 +370,7 @@ spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi) /* Read PDA from the adapter */ static int -spectrum_read_pda(hermes_t *hw, u16 *pda, int pda_len) +spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len) { int ret; int pda_size; @@ -401,7 +401,7 @@ spectrum_read_pda(hermes_t *hw, u16 *pda, int pda_len) /* Parse PDA and write the records into the adapter */ static int spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block, - u16 *pda) + __le16 *pda) { int ret; struct pdi *pdi; @@ -467,7 +467,7 @@ spectrum_dl_image(hermes_t *hw, dev_link_t *link, const struct dblock *first_block; /* Plug Data Area (PDA) */ - u16 pda[PDA_WORDS]; + __le16 pda[PDA_WORDS]; /* Binary block begins after the 0x1A marker */ ptr = image; -- GitLab From 48ca703807eba616ad5e384b40e27514bd341a3d Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH 0102/1519] [PATCH] orinoco: Read only needed data in __orinoco_ev_txexc(). Signed-off-by: Pavel Roskin Read only needed data in __orinoco_ev_txexc(). Don't read the 802.11 header beyond addr1. The rest of the frame is not used currently. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 1ae301c62281..78afbc7f08be 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -623,10 +623,10 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) if (fid == DUMMY_FID) return; /* Nothing's really happened */ - /* Read the frame header */ + /* Read part of the frame header - we need status and addr1 */ err = hermes_bap_pread(hw, IRQ_BAP, &hdr, - sizeof(struct hermes_tx_descriptor) + - sizeof(struct ieee80211_hdr_4addr), + offsetof(struct hermes_tx_descriptor_802_11, + addr2), fid, 0); hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); -- GitLab From acc4b985a6f8f22a0e826692894a4af234764001 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 04:18:06 -0400 Subject: [PATCH 0103/1519] [PATCH] orinoco: Bump version to 0.15rc3. Signed-off-by: Pavel Roskin Bump version to 0.15rc3. Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 6920ead11449..7a17bb31fc89 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -7,7 +7,7 @@ #ifndef _ORINOCO_H #define _ORINOCO_H -#define DRIVER_VERSION "0.15rc2" +#define DRIVER_VERSION "0.15rc3" #include #include -- GitLab From 20509f1bc553ed7fafa88fa8d01c6212d1876d9f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 25 Aug 2005 16:25:34 -0700 Subject: [PATCH 0104/1519] NFS: Drop inode after rename When doing a rename on top of an existing file that is not in use, the inode of the overwritten file will remain in the icache. The fix is to decrement i_nlink of the overwritten inode, like we do for unlink, rmdir etc already. Problem diagnosed by Olaf Kirch. This patch is a slight variation on his fix. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 2df639f143e8..94a7fcee0624 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1539,7 +1539,8 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, #endif goto out; } - } + } else + new_inode->i_nlink--; go_ahead: /* -- GitLab From 449231d6ddf50ca46b7fb2f76ecf790135222913 Mon Sep 17 00:00:00 2001 From: Olaf Kirch Date: Thu, 25 Aug 2005 16:25:35 -0700 Subject: [PATCH 0105/1519] From: Olaf Kirch [PATCH] Fix miscompare in __posix_lock_file If an application requests the same lock twice, the kernel should just leave the existing lock in place. Currently, it will install a second lock of the same type. Signed-off-by: Olaf Kirch Signed-off-by: Trond Myklebust --- fs/locks.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/locks.c b/fs/locks.c index f7daa5f48949..7eb1d77b9204 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -829,12 +829,16 @@ static int __posix_lock_file(struct inode *inode, struct file_lock *request) /* Detect adjacent or overlapping regions (if same lock type) */ if (request->fl_type == fl->fl_type) { + /* In all comparisons of start vs end, use + * "start - 1" rather than "end + 1". If end + * is OFFSET_MAX, end + 1 will become negative. + */ if (fl->fl_end < request->fl_start - 1) goto next_lock; /* If the next lock in the list has entirely bigger * addresses than the new one, insert the lock here. */ - if (fl->fl_start > request->fl_end + 1) + if (fl->fl_start - 1 > request->fl_end) break; /* If we come here, the new and old lock are of the -- GitLab From 9aa48b7e270d13c8781414dce081a42cae20a80d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 25 Aug 2005 16:25:35 -0700 Subject: [PATCH 0106/1519] NFS: Don't expose internal READDIR errors to userspace Fixes a condition whereby the kernel is returning the non-POSIX error EBADCOOKIE to userspace. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 94a7fcee0624..c70eabd6d179 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -565,8 +565,6 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir) } } unlock_kernel(); - if (desc->error < 0) - return desc->error; if (res < 0) return res; return 0; -- GitLab From 23475d66bd8600e0c5353f86c1b74f68df27bdb5 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:08 -0400 Subject: [PATCH 0107/1519] [PATCH] RPC: Report connection errors properly when mounting with "soft" Fix up xprt_connect_status: the soft timeout logic was clobbering tk_status, so TCP connect errors were not properly reported on soft mounts. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Version: Thu, 11 Aug 2005 16:01:28 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/xprt.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 3c654e06b084..b28ea0cc0cb7 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -592,24 +592,33 @@ xprt_connect_status(struct rpc_task *task) return; } - /* if soft mounted, just cause this RPC to fail */ - if (RPC_IS_SOFT(task)) - task->tk_status = -EIO; - switch (task->tk_status) { case -ECONNREFUSED: case -ECONNRESET: + dprintk("RPC: %4d xprt_connect_status: server %s refused connection\n", + task->tk_pid, task->tk_client->cl_server); + break; case -ENOTCONN: - return; + dprintk("RPC: %4d xprt_connect_status: connection broken\n", + task->tk_pid); + break; case -ETIMEDOUT: - dprintk("RPC: %4d xprt_connect_status: timed out\n", + dprintk("RPC: %4d xprt_connect_status: connect attempt timed out\n", task->tk_pid); break; default: - printk(KERN_ERR "RPC: error %d connecting to server %s\n", - -task->tk_status, task->tk_client->cl_server); + dprintk("RPC: %4d xprt_connect_status: error %d connecting to server %s\n", + task->tk_pid, -task->tk_status, task->tk_client->cl_server); + xprt_release_write(xprt, task); + task->tk_status = -EIO; + return; + } + + /* if soft mounted, just cause this RPC to fail */ + if (RPC_IS_SOFT(task)) { + xprt_release_write(xprt, task); + task->tk_status = -EIO; } - xprt_release_write(xprt, task); } /* -- GitLab From da35187801732397a7e05fb9e77f3700cc35f5db Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:11 -0400 Subject: [PATCH 0108/1519] [PATCH] RPC: proper soft timeout behavior for rpcbind Implement a best practice: for soft mounts, an rpcbind timeout should cause an RPC request to fail. This also provides an FSM hook for retrying an rpcbind with a different rpcbind protocol version. We'll use this later to try multiple rpcbind protocol versions when binding. To enable this, expose the RPC error code returned during a portmap request to the FSM so it can make some decision about how to report, retry, or fail the request. Test-plan: Hundreds of passes with connectathon NFSv3 locking suite, on the client and server. Version: Thu, 11 Aug 2005 16:01:53 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 97 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 77 insertions(+), 20 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index f17e6153b688..2d3cf0a52d82 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -53,6 +53,7 @@ static void call_allocate(struct rpc_task *task); static void call_encode(struct rpc_task *task); static void call_decode(struct rpc_task *task); static void call_bind(struct rpc_task *task); +static void call_bind_status(struct rpc_task *task); static void call_transmit(struct rpc_task *task); static void call_status(struct rpc_task *task); static void call_refresh(struct rpc_task *task); @@ -734,43 +735,94 @@ static void call_bind(struct rpc_task *task) { struct rpc_clnt *clnt = task->tk_client; - struct rpc_xprt *xprt = clnt->cl_xprt; - - dprintk("RPC: %4d call_bind xprt %p %s connected\n", task->tk_pid, - xprt, (xprt_connected(xprt) ? "is" : "is not")); - task->tk_action = (xprt_connected(xprt)) ? call_transmit : call_connect; + dprintk("RPC: %4d call_bind (status %d)\n", + task->tk_pid, task->tk_status); + task->tk_action = call_connect; if (!clnt->cl_port) { - task->tk_action = call_connect; + task->tk_action = call_bind_status; task->tk_timeout = RPC_CONNECT_TIMEOUT; rpc_getport(task, clnt); } } /* - * 4a. Connect to the RPC server (TCP case) + * 4a. Sort out bind result + */ +static void +call_bind_status(struct rpc_task *task) +{ + int status = -EACCES; + + if (task->tk_status >= 0) { + dprintk("RPC: %4d call_bind_status (status %d)\n", + task->tk_pid, task->tk_status); + task->tk_status = 0; + task->tk_action = call_connect; + return; + } + + switch (task->tk_status) { + case -EACCES: + dprintk("RPC: %4d remote rpcbind: RPC program/version unavailable\n", + task->tk_pid); + break; + case -ETIMEDOUT: + dprintk("RPC: %4d rpcbind request timed out\n", + task->tk_pid); + if (RPC_IS_SOFT(task)) { + status = -EIO; + break; + } + goto retry_bind; + case -EPFNOSUPPORT: + dprintk("RPC: %4d remote rpcbind service unavailable\n", + task->tk_pid); + break; + case -EPROTONOSUPPORT: + dprintk("RPC: %4d remote rpcbind version 2 unavailable\n", + task->tk_pid); + break; + default: + dprintk("RPC: %4d unrecognized rpcbind error (%d)\n", + task->tk_pid, -task->tk_status); + status = -EIO; + break; + } + + rpc_exit(task, status); + return; + +retry_bind: + task->tk_status = 0; + task->tk_action = call_bind; + return; +} + +/* + * 4b. Connect to the RPC server */ static void call_connect(struct rpc_task *task) { - struct rpc_clnt *clnt = task->tk_client; + struct rpc_xprt *xprt = task->tk_xprt; - dprintk("RPC: %4d call_connect status %d\n", - task->tk_pid, task->tk_status); + dprintk("RPC: %4d call_connect xprt %p %s connected\n", + task->tk_pid, xprt, + (xprt_connected(xprt) ? "is" : "is not")); - if (xprt_connected(clnt->cl_xprt)) { - task->tk_action = call_transmit; - return; + task->tk_action = call_transmit; + if (!xprt_connected(xprt)) { + task->tk_action = call_connect_status; + if (task->tk_status < 0) + return; + xprt_connect(task); } - task->tk_action = call_connect_status; - if (task->tk_status < 0) - return; - xprt_connect(task); } /* - * 4b. Sort out connect result + * 4c. Sort out connect result */ static void call_connect_status(struct rpc_task *task) @@ -778,6 +830,9 @@ call_connect_status(struct rpc_task *task) struct rpc_clnt *clnt = task->tk_client; int status = task->tk_status; + dprintk("RPC: %5u call_connect_status (status %d)\n", + task->tk_pid, task->tk_status); + task->tk_status = 0; if (status >= 0) { clnt->cl_stats->netreconn++; @@ -785,17 +840,19 @@ call_connect_status(struct rpc_task *task) return; } - /* Something failed: we may have to rebind */ + /* Something failed: remote service port may have changed */ if (clnt->cl_autobind) clnt->cl_port = 0; + switch (status) { case -ENOTCONN: case -ETIMEDOUT: case -EAGAIN: - task->tk_action = (clnt->cl_port == 0) ? call_bind : call_connect; + task->tk_action = call_bind; break; default: rpc_exit(task, -EIO); + break; } } -- GitLab From eab5c084b858fd95a873fc2b97de9a9ad937b4ed Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:14 -0400 Subject: [PATCH 0109/1519] [PATCH] NFS: use a constant value for TCP retransmit timeouts Implement a best practice: don't use exponential backoff when computing retransmit timeout values on TCP connections, but simply retransmit at regular intervals. This also fixes a bug introduced when xprt_reset_majortimeo() was added. Test-plan: Enable RPC debugging and watch timeout behavior on a NFS/TCP mount. Version: Thu, 11 Aug 2005 16:02:19 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 73 +++++++++++++++++++++++------------------------ net/sunrpc/xprt.c | 4 +-- 2 files changed, 37 insertions(+), 40 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 6922469d6fc5..b6a1ca508e60 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -358,6 +358,35 @@ nfs_sb_init(struct super_block *sb, rpc_authflavor_t authflavor) return no_root_error; } +static void nfs_init_timeout_values(struct rpc_timeout *to, int proto, unsigned int timeo, unsigned int retrans) +{ + to->to_initval = timeo * HZ / 10; + to->to_retries = retrans; + if (!to->to_retries) + to->to_retries = 2; + + switch (proto) { + case IPPROTO_TCP: + if (!to->to_initval) + to->to_initval = 60 * HZ; + if (to->to_initval > RPC_MAX_TCP_TIMEOUT) + to->to_initval = RPC_MAX_TCP_TIMEOUT; + to->to_increment = to->to_initval; + to->to_maxval = to->to_initval + (to->to_increment * to->to_retries); + to->to_exponential = 0; + break; + case IPPROTO_UDP: + default: + if (!to->to_initval) + to->to_initval = 11 * HZ / 10; + if (to->to_initval > RPC_MAX_UDP_TIMEOUT) + to->to_initval = RPC_MAX_UDP_TIMEOUT; + to->to_maxval = RPC_MAX_UDP_TIMEOUT; + to->to_exponential = 1; + break; + } +} + /* * Create an RPC client handle. */ @@ -367,22 +396,12 @@ nfs_create_client(struct nfs_server *server, const struct nfs_mount_data *data) struct rpc_timeout timeparms; struct rpc_xprt *xprt = NULL; struct rpc_clnt *clnt = NULL; - int tcp = (data->flags & NFS_MOUNT_TCP); - - /* Initialize timeout values */ - timeparms.to_initval = data->timeo * HZ / 10; - timeparms.to_retries = data->retrans; - timeparms.to_maxval = tcp ? RPC_MAX_TCP_TIMEOUT : RPC_MAX_UDP_TIMEOUT; - timeparms.to_exponential = 1; + int proto = (data->flags & NFS_MOUNT_TCP) ? IPPROTO_TCP : IPPROTO_UDP; - if (!timeparms.to_initval) - timeparms.to_initval = (tcp ? 600 : 11) * HZ / 10; - if (!timeparms.to_retries) - timeparms.to_retries = 5; + nfs_init_timeout_values(&timeparms, proto, data->timeo, data->retrans); /* create transport and client */ - xprt = xprt_create_proto(tcp ? IPPROTO_TCP : IPPROTO_UDP, - &server->addr, &timeparms); + xprt = xprt_create_proto(proto, &server->addr, &timeparms); if (IS_ERR(xprt)) { dprintk("%s: cannot create RPC transport. Error = %ld\n", __FUNCTION__, PTR_ERR(xprt)); @@ -1674,7 +1693,7 @@ static int nfs4_fill_super(struct super_block *sb, struct nfs4_mount_data *data, struct rpc_clnt *clnt = NULL; struct rpc_timeout timeparms; rpc_authflavor_t authflavour; - int proto, err = -EIO; + int err = -EIO; sb->s_blocksize_bits = 0; sb->s_blocksize = 0; @@ -1692,30 +1711,8 @@ static int nfs4_fill_super(struct super_block *sb, struct nfs4_mount_data *data, server->acdirmax = data->acdirmax*HZ; server->rpc_ops = &nfs_v4_clientops; - /* Initialize timeout values */ - - timeparms.to_initval = data->timeo * HZ / 10; - timeparms.to_retries = data->retrans; - timeparms.to_exponential = 1; - if (!timeparms.to_retries) - timeparms.to_retries = 5; - proto = data->proto; - /* Which IP protocol do we use? */ - switch (proto) { - case IPPROTO_TCP: - timeparms.to_maxval = RPC_MAX_TCP_TIMEOUT; - if (!timeparms.to_initval) - timeparms.to_initval = 600 * HZ / 10; - break; - case IPPROTO_UDP: - timeparms.to_maxval = RPC_MAX_UDP_TIMEOUT; - if (!timeparms.to_initval) - timeparms.to_initval = 11 * HZ / 10; - break; - default: - return -EINVAL; - } + nfs_init_timeout_values(&timeparms, data->proto, data->timeo, data->retrans); clp = nfs4_get_client(&server->addr.sin_addr); if (!clp) { @@ -1740,7 +1737,7 @@ static int nfs4_fill_super(struct super_block *sb, struct nfs4_mount_data *data, down_write(&clp->cl_sem); if (IS_ERR(clp->cl_rpcclient)) { - xprt = xprt_create_proto(proto, &server->addr, &timeparms); + xprt = xprt_create_proto(data->proto, &server->addr, &timeparms); if (IS_ERR(xprt)) { up_write(&clp->cl_sem); err = PTR_ERR(xprt); diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index b28ea0cc0cb7..0e4ffdaa0129 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -1453,7 +1453,7 @@ xprt_default_timeout(struct rpc_timeout *to, int proto) if (proto == IPPROTO_UDP) xprt_set_timeout(to, 5, 5 * HZ); else - xprt_set_timeout(to, 5, 60 * HZ); + xprt_set_timeout(to, 2, 60 * HZ); } /* @@ -1464,7 +1464,7 @@ xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr) { to->to_initval = to->to_increment = incr; - to->to_maxval = incr * retr; + to->to_maxval = to->to_initval + (incr * retr); to->to_retries = retr; to->to_exponential = 0; } -- GitLab From 602f83273c89fdd25f24757564d8001cf723e740 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:17 -0400 Subject: [PATCH 0110/1519] [PATCH] RPC: portmapper doesn't need a reserved port The in-kernel portmapper does not require a reserved port for making bind queries. Test-plan: Tens of runs of the Connectathon locking suite with TCP and UDP against several other NFS server implementations using NFSv3, not NFSv4 (which doesn't require rpcbind). Version: Thu, 11 Aug 2005 16:02:43 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/pmap_clnt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sunrpc/pmap_clnt.c b/net/sunrpc/pmap_clnt.c index 4e81f2766923..d8e3f220002b 100644 --- a/net/sunrpc/pmap_clnt.c +++ b/net/sunrpc/pmap_clnt.c @@ -208,6 +208,7 @@ pmap_create(char *hostname, struct sockaddr_in *srvaddr, int proto) if (IS_ERR(xprt)) return (struct rpc_clnt *)xprt; xprt->addr.sin_port = htons(RPC_PMAP_PORT); + xprt->resvport = 0; /* printk("pmap: create clnt\n"); */ clnt = rpc_new_client(xprt, hostname, -- GitLab From 094bb20b9fcab3a1652a77741caba6b78097d622 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:20 -0400 Subject: [PATCH 0111/1519] [PATCH] RPC: extract socket logic common to both client and server Clean-up: Move some code that is common to both RPC client- and server-side socket transports into its own source file, net/sunrpc/socklib.c. Test-plan: Compile kernel with CONFIG_NFS enabled. Millions of fsx operations over UDP, client and server. Connectathon over UDP. Version: Thu, 11 Aug 2005 16:03:09 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 1 + net/sunrpc/Makefile | 2 +- net/sunrpc/socklib.c | 175 +++++++++++++++++++++++++++++++++++++ net/sunrpc/svcsock.c | 3 - net/sunrpc/xdr.c | 75 ---------------- net/sunrpc/xprt.c | 64 -------------- 6 files changed, 177 insertions(+), 143 deletions(-) create mode 100644 net/sunrpc/socklib.c diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index 23448d0fb5bc..d8b7656bca41 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -161,6 +161,7 @@ typedef struct { typedef size_t (*skb_read_actor_t)(skb_reader_t *desc, void *to, size_t len); +extern int csum_partial_copy_to_xdr(struct xdr_buf *, struct sk_buff *); extern ssize_t xdr_partial_copy_from_skb(struct xdr_buf *, unsigned int, skb_reader_t *, skb_read_actor_t); diff --git a/net/sunrpc/Makefile b/net/sunrpc/Makefile index 46a2ce00a29b..f0a955627177 100644 --- a/net/sunrpc/Makefile +++ b/net/sunrpc/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_SUNRPC) += sunrpc.o obj-$(CONFIG_SUNRPC_GSS) += auth_gss/ -sunrpc-y := clnt.o xprt.o sched.o \ +sunrpc-y := clnt.o xprt.o socklib.o sched.o \ auth.o auth_null.o auth_unix.o \ svc.o svcsock.o svcauth.o svcauth_unix.o \ pmap_clnt.o timer.o xdr.o \ diff --git a/net/sunrpc/socklib.c b/net/sunrpc/socklib.c new file mode 100644 index 000000000000..8f97e90f36c8 --- /dev/null +++ b/net/sunrpc/socklib.c @@ -0,0 +1,175 @@ +/* + * linux/net/sunrpc/socklib.c + * + * Common socket helper routines for RPC client and server + * + * Copyright (C) 1995, 1996 Olaf Kirch + */ + +#include +#include +#include +#include + + +/** + * skb_read_bits - copy some data bits from skb to internal buffer + * @desc: sk_buff copy helper + * @to: copy destination + * @len: number of bytes to copy + * + * Possibly called several times to iterate over an sk_buff and copy + * data out of it. + */ +static size_t skb_read_bits(skb_reader_t *desc, void *to, size_t len) +{ + if (len > desc->count) + len = desc->count; + if (skb_copy_bits(desc->skb, desc->offset, to, len)) + return 0; + desc->count -= len; + desc->offset += len; + return len; +} + +/** + * skb_read_and_csum_bits - copy and checksum from skb to buffer + * @desc: sk_buff copy helper + * @to: copy destination + * @len: number of bytes to copy + * + * Same as skb_read_bits, but calculate a checksum at the same time. + */ +static size_t skb_read_and_csum_bits(skb_reader_t *desc, void *to, size_t len) +{ + unsigned int csum2, pos; + + if (len > desc->count) + len = desc->count; + pos = desc->offset; + csum2 = skb_copy_and_csum_bits(desc->skb, pos, to, len, 0); + desc->csum = csum_block_add(desc->csum, csum2, pos); + desc->count -= len; + desc->offset += len; + return len; +} + +/** + * xdr_partial_copy_from_skb - copy data out of an skb + * @xdr: target XDR buffer + * @base: starting offset + * @desc: sk_buff copy helper + * @copy_actor: virtual method for copying data + * + */ +ssize_t xdr_partial_copy_from_skb(struct xdr_buf *xdr, unsigned int base, skb_reader_t *desc, skb_read_actor_t copy_actor) +{ + struct page **ppage = xdr->pages; + unsigned int len, pglen = xdr->page_len; + ssize_t copied = 0; + int ret; + + len = xdr->head[0].iov_len; + if (base < len) { + len -= base; + ret = copy_actor(desc, (char *)xdr->head[0].iov_base + base, len); + copied += ret; + if (ret != len || !desc->count) + goto out; + base = 0; + } else + base -= len; + + if (unlikely(pglen == 0)) + goto copy_tail; + if (unlikely(base >= pglen)) { + base -= pglen; + goto copy_tail; + } + if (base || xdr->page_base) { + pglen -= base; + base += xdr->page_base; + ppage += base >> PAGE_CACHE_SHIFT; + base &= ~PAGE_CACHE_MASK; + } + do { + char *kaddr; + + /* ACL likes to be lazy in allocating pages - ACLs + * are small by default but can get huge. */ + if (unlikely(*ppage == NULL)) { + *ppage = alloc_page(GFP_ATOMIC); + if (unlikely(*ppage == NULL)) { + if (copied == 0) + copied = -ENOMEM; + goto out; + } + } + + len = PAGE_CACHE_SIZE; + kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA); + if (base) { + len -= base; + if (pglen < len) + len = pglen; + ret = copy_actor(desc, kaddr + base, len); + base = 0; + } else { + if (pglen < len) + len = pglen; + ret = copy_actor(desc, kaddr, len); + } + flush_dcache_page(*ppage); + kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA); + copied += ret; + if (ret != len || !desc->count) + goto out; + ppage++; + } while ((pglen -= len) != 0); +copy_tail: + len = xdr->tail[0].iov_len; + if (base < len) + copied += copy_actor(desc, (char *)xdr->tail[0].iov_base + base, len - base); +out: + return copied; +} + +/** + * csum_partial_copy_to_xdr - checksum and copy data + * @xdr: target XDR buffer + * @skb: source skb + * + * We have set things up such that we perform the checksum of the UDP + * packet in parallel with the copies into the RPC client iovec. -DaveM + */ +int csum_partial_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb) +{ + skb_reader_t desc; + + desc.skb = skb; + desc.offset = sizeof(struct udphdr); + desc.count = skb->len - desc.offset; + + if (skb->ip_summed == CHECKSUM_UNNECESSARY) + goto no_checksum; + + desc.csum = csum_partial(skb->data, desc.offset, skb->csum); + if (xdr_partial_copy_from_skb(xdr, 0, &desc, skb_read_and_csum_bits) < 0) + return -1; + if (desc.offset != skb->len) { + unsigned int csum2; + csum2 = skb_checksum(skb, desc.offset, skb->len - desc.offset, 0); + desc.csum = csum_block_add(desc.csum, csum2, desc.offset); + } + if (desc.count) + return -1; + if ((unsigned short)csum_fold(desc.csum)) + return -1; + return 0; +no_checksum: + if (xdr_partial_copy_from_skb(xdr, 0, &desc, skb_read_bits) < 0) + return -1; + if (desc.count) + return -1; + return 0; +} diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 30ec3efc48a6..130f2b5d93dd 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -548,9 +548,6 @@ svc_write_space(struct sock *sk) /* * Receive a datagram from a UDP socket. */ -extern int -csum_partial_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb); - static int svc_udp_recvfrom(struct svc_rqst *rqstp) { diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index fde16f40a581..9cc12aeed22c 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -176,81 +176,6 @@ xdr_inline_pages(struct xdr_buf *xdr, unsigned int offset, xdr->buflen += len; } -ssize_t -xdr_partial_copy_from_skb(struct xdr_buf *xdr, unsigned int base, - skb_reader_t *desc, - skb_read_actor_t copy_actor) -{ - struct page **ppage = xdr->pages; - unsigned int len, pglen = xdr->page_len; - ssize_t copied = 0; - int ret; - - len = xdr->head[0].iov_len; - if (base < len) { - len -= base; - ret = copy_actor(desc, (char *)xdr->head[0].iov_base + base, len); - copied += ret; - if (ret != len || !desc->count) - goto out; - base = 0; - } else - base -= len; - - if (pglen == 0) - goto copy_tail; - if (base >= pglen) { - base -= pglen; - goto copy_tail; - } - if (base || xdr->page_base) { - pglen -= base; - base += xdr->page_base; - ppage += base >> PAGE_CACHE_SHIFT; - base &= ~PAGE_CACHE_MASK; - } - do { - char *kaddr; - - /* ACL likes to be lazy in allocating pages - ACLs - * are small by default but can get huge. */ - if (unlikely(*ppage == NULL)) { - *ppage = alloc_page(GFP_ATOMIC); - if (unlikely(*ppage == NULL)) { - if (copied == 0) - copied = -ENOMEM; - goto out; - } - } - - len = PAGE_CACHE_SIZE; - kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA); - if (base) { - len -= base; - if (pglen < len) - len = pglen; - ret = copy_actor(desc, kaddr + base, len); - base = 0; - } else { - if (pglen < len) - len = pglen; - ret = copy_actor(desc, kaddr, len); - } - flush_dcache_page(*ppage); - kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA); - copied += ret; - if (ret != len || !desc->count) - goto out; - ppage++; - } while ((pglen -= len) != 0); -copy_tail: - len = xdr->tail[0].iov_len; - if (base < len) - copied += copy_actor(desc, (char *)xdr->tail[0].iov_base + base, len - base); -out: - return copied; -} - int xdr_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 0e4ffdaa0129..67444f494fea 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -691,70 +691,6 @@ xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied) return; } -static size_t -skb_read_bits(skb_reader_t *desc, void *to, size_t len) -{ - if (len > desc->count) - len = desc->count; - if (skb_copy_bits(desc->skb, desc->offset, to, len)) - return 0; - desc->count -= len; - desc->offset += len; - return len; -} - -static size_t -skb_read_and_csum_bits(skb_reader_t *desc, void *to, size_t len) -{ - unsigned int csum2, pos; - - if (len > desc->count) - len = desc->count; - pos = desc->offset; - csum2 = skb_copy_and_csum_bits(desc->skb, pos, to, len, 0); - desc->csum = csum_block_add(desc->csum, csum2, pos); - desc->count -= len; - desc->offset += len; - return len; -} - -/* - * We have set things up such that we perform the checksum of the UDP - * packet in parallel with the copies into the RPC client iovec. -DaveM - */ -int -csum_partial_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb) -{ - skb_reader_t desc; - - desc.skb = skb; - desc.offset = sizeof(struct udphdr); - desc.count = skb->len - desc.offset; - - if (skb->ip_summed == CHECKSUM_UNNECESSARY) - goto no_checksum; - - desc.csum = csum_partial(skb->data, desc.offset, skb->csum); - if (xdr_partial_copy_from_skb(xdr, 0, &desc, skb_read_and_csum_bits) < 0) - return -1; - if (desc.offset != skb->len) { - unsigned int csum2; - csum2 = skb_checksum(skb, desc.offset, skb->len - desc.offset, 0); - desc.csum = csum_block_add(desc.csum, csum2, desc.offset); - } - if (desc.count) - return -1; - if ((unsigned short)csum_fold(desc.csum)) - return -1; - return 0; -no_checksum: - if (xdr_partial_copy_from_skb(xdr, 0, &desc, skb_read_bits) < 0) - return -1; - if (desc.count) - return -1; - return 0; -} - /* * Input handler for RPC replies. Called from a bottom half and hence * atomic. -- GitLab From a246b0105bbd9a70a698f69baae2042996f2a0e9 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:23 -0400 Subject: [PATCH 0112/1519] [PATCH] RPC: introduce client-side transport switch Move the bulk of client-side socket-specific code into a separate source file, net/sunrpc/xprtsock.c. Test-plan: Millions of fsx operations. Performance characterization such as "sio" or "iozone". Destructive testing (unplugging the network temporarily, server reboots). Connectathon with v2, v3, and v4. Version: Thu, 11 Aug 2005 16:03:38 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 5 - include/linux/sunrpc/xprt.h | 38 +- net/sunrpc/Makefile | 2 +- net/sunrpc/clnt.c | 3 +- net/sunrpc/sysctl.c | 3 + net/sunrpc/xdr.c | 102 +--- net/sunrpc/xprt.c | 916 ++----------------------------- net/sunrpc/xprtsock.c | 1021 +++++++++++++++++++++++++++++++++++ 8 files changed, 1101 insertions(+), 989 deletions(-) create mode 100644 net/sunrpc/xprtsock.c diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index d8b7656bca41..5da968729cf8 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -165,11 +165,6 @@ extern int csum_partial_copy_to_xdr(struct xdr_buf *, struct sk_buff *); extern ssize_t xdr_partial_copy_from_skb(struct xdr_buf *, unsigned int, skb_reader_t *, skb_read_actor_t); -struct socket; -struct sockaddr; -extern int xdr_sendpages(struct socket *, struct sockaddr *, int, - struct xdr_buf *, unsigned int, int); - extern int xdr_encode_word(struct xdr_buf *, int, u32); extern int xdr_decode_word(struct xdr_buf *, int, u32 *); diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index e618c1649814..d82b47ab73cb 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -59,7 +59,13 @@ extern unsigned int xprt_tcp_slot_table_entries; */ #define RPC_REESTABLISH_TIMEOUT (15*HZ) -/* RPC call and reply header size as number of 32bit words (verifier +/* + * RPC transport idle timeout. + */ +#define RPC_IDLE_DISCONNECT_TIMEOUT (5*60*HZ) + +/* + * RPC call and reply header size as number of 32bit words (verifier * size computed separately) */ #define RPC_CALLHDRSIZE 6 @@ -121,12 +127,19 @@ struct rpc_rqst { #define rq_svec rq_snd_buf.head #define rq_slen rq_snd_buf.len -#define XPRT_LAST_FRAG (1 << 0) -#define XPRT_COPY_RECM (1 << 1) -#define XPRT_COPY_XID (1 << 2) -#define XPRT_COPY_DATA (1 << 3) +struct rpc_task; +struct rpc_xprt; + +struct rpc_xprt_ops { + void (*set_buffer_size)(struct rpc_xprt *xprt); + void (*connect)(struct rpc_task *task); + int (*send_request)(struct rpc_task *task); + void (*close)(struct rpc_xprt *xprt); + void (*destroy)(struct rpc_xprt *xprt); +}; struct rpc_xprt { + struct rpc_xprt_ops * ops; /* transport methods */ struct socket * sock; /* BSD socket layer */ struct sock * inet; /* INET layer */ @@ -199,14 +212,22 @@ struct rpc_xprt { wait_queue_head_t cong_wait; }; +#define XPRT_LAST_FRAG (1 << 0) +#define XPRT_COPY_RECM (1 << 1) +#define XPRT_COPY_XID (1 << 2) +#define XPRT_COPY_DATA (1 << 3) + #ifdef __KERNEL__ struct rpc_xprt * xprt_create_proto(int proto, struct sockaddr_in *addr, struct rpc_timeout *toparms); +void xprt_disconnect(struct rpc_xprt *); int xprt_destroy(struct rpc_xprt *); void xprt_set_timeout(struct rpc_timeout *, unsigned int, unsigned long); - +struct rpc_rqst * xprt_lookup_rqst(struct rpc_xprt *, u32); +void xprt_complete_rqst(struct rpc_xprt *, + struct rpc_rqst *, int); void xprt_reserve(struct rpc_task *); int xprt_prepare_transmit(struct rpc_task *); void xprt_transmit(struct rpc_task *); @@ -214,7 +235,10 @@ void xprt_receive(struct rpc_task *); int xprt_adjust_timeout(struct rpc_rqst *req); void xprt_release(struct rpc_task *); void xprt_connect(struct rpc_task *); -void xprt_sock_setbufsize(struct rpc_xprt *); +int xs_setup_udp(struct rpc_xprt *, + struct rpc_timeout *); +int xs_setup_tcp(struct rpc_xprt *, + struct rpc_timeout *); #define XPRT_LOCKED 0 #define XPRT_CONNECT 1 diff --git a/net/sunrpc/Makefile b/net/sunrpc/Makefile index f0a955627177..cdcab9ca4c60 100644 --- a/net/sunrpc/Makefile +++ b/net/sunrpc/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_SUNRPC) += sunrpc.o obj-$(CONFIG_SUNRPC_GSS) += auth_gss/ -sunrpc-y := clnt.o xprt.o socklib.o sched.o \ +sunrpc-y := clnt.o xprt.o socklib.o xprtsock.o sched.o \ auth.o auth_null.o auth_unix.o \ svc.o svcsock.o svcauth.o svcauth_unix.o \ pmap_clnt.o timer.o xdr.o \ diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 2d3cf0a52d82..ab50c3c9e6a8 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -525,8 +525,7 @@ rpc_setbufsize(struct rpc_clnt *clnt, unsigned int sndsize, unsigned int rcvsize xprt->rcvsize = 0; if (rcvsize) xprt->rcvsize = rcvsize + RPC_SLACK_SPACE; - if (xprt_connected(xprt)) - xprt_sock_setbufsize(xprt); + xprt->ops->set_buffer_size(xprt); } /* diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c index 1b9616a12e24..ef483262f17f 100644 --- a/net/sunrpc/sysctl.c +++ b/net/sunrpc/sysctl.c @@ -119,6 +119,9 @@ proc_dodebug(ctl_table *table, int write, struct file *file, return 0; } +unsigned int xprt_udp_slot_table_entries = RPC_DEF_SLOT_TABLE; +unsigned int xprt_tcp_slot_table_entries = RPC_DEF_SLOT_TABLE; + static unsigned int min_slot_table_size = RPC_MIN_SLOT_TABLE; static unsigned int max_slot_table_size = RPC_MAX_SLOT_TABLE; diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index 9cc12aeed22c..32df43372ee9 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -6,15 +6,12 @@ * Copyright (C) 1995, 1996 Olaf Kirch */ +#include #include -#include #include #include #include #include -#include -#include -#include #include #include @@ -177,103 +174,6 @@ xdr_inline_pages(struct xdr_buf *xdr, unsigned int offset, } -int -xdr_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, - struct xdr_buf *xdr, unsigned int base, int msgflags) -{ - struct page **ppage = xdr->pages; - unsigned int len, pglen = xdr->page_len; - int err, ret = 0; - ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int); - - len = xdr->head[0].iov_len; - if (base < len || (addr != NULL && base == 0)) { - struct kvec iov = { - .iov_base = xdr->head[0].iov_base + base, - .iov_len = len - base, - }; - struct msghdr msg = { - .msg_name = addr, - .msg_namelen = addrlen, - .msg_flags = msgflags, - }; - if (xdr->len > len) - msg.msg_flags |= MSG_MORE; - - if (iov.iov_len != 0) - err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); - else - err = kernel_sendmsg(sock, &msg, NULL, 0, 0); - if (ret == 0) - ret = err; - else if (err > 0) - ret += err; - if (err != iov.iov_len) - goto out; - base = 0; - } else - base -= len; - - if (pglen == 0) - goto copy_tail; - if (base >= pglen) { - base -= pglen; - goto copy_tail; - } - if (base || xdr->page_base) { - pglen -= base; - base += xdr->page_base; - ppage += base >> PAGE_CACHE_SHIFT; - base &= ~PAGE_CACHE_MASK; - } - - sendpage = sock->ops->sendpage ? : sock_no_sendpage; - do { - int flags = msgflags; - - len = PAGE_CACHE_SIZE; - if (base) - len -= base; - if (pglen < len) - len = pglen; - - if (pglen != len || xdr->tail[0].iov_len != 0) - flags |= MSG_MORE; - - /* Hmm... We might be dealing with highmem pages */ - if (PageHighMem(*ppage)) - sendpage = sock_no_sendpage; - err = sendpage(sock, *ppage, base, len, flags); - if (ret == 0) - ret = err; - else if (err > 0) - ret += err; - if (err != len) - goto out; - base = 0; - ppage++; - } while ((pglen -= len) != 0); -copy_tail: - len = xdr->tail[0].iov_len; - if (base < len) { - struct kvec iov = { - .iov_base = xdr->tail[0].iov_base + base, - .iov_len = len - base, - }; - struct msghdr msg = { - .msg_flags = msgflags, - }; - err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); - if (ret == 0) - ret = err; - else if (err > 0) - ret += err; - } -out: - return ret; -} - - /* * Helper routines for doing 'memmove' like operations on a struct xdr_buf * diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 67444f494fea..4342acf4d1cd 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -32,37 +32,16 @@ * tasks that rely on callbacks. * * Copyright (C) 1995-1997, Olaf Kirch - * - * TCP callback races fixes (C) 1998 Red Hat Software - * TCP send fixes (C) 1998 Red Hat Software - * TCP NFS related read + write fixes - * (C) 1999 Dave Airlie, University of Limerick, Ireland - * - * Rewrite of larges part of the code in order to stabilize TCP stuff. - * Fix behaviour when socket buffer is full. - * (C) 1999 Trond Myklebust */ +#include + #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include #include -#include -#include -#include -#include +#include /* * Local variables @@ -74,64 +53,17 @@ #endif #define XPRT_MAX_BACKOFF (8) -#define XPRT_IDLE_TIMEOUT (5*60*HZ) -#define XPRT_MAX_RESVPORT (800) /* * Local functions */ static void xprt_request_init(struct rpc_task *, struct rpc_xprt *); static inline void do_xprt_reserve(struct rpc_task *); -static void xprt_disconnect(struct rpc_xprt *); static void xprt_connect_status(struct rpc_task *task); -static struct rpc_xprt * xprt_setup(int proto, struct sockaddr_in *ap, - struct rpc_timeout *to); -static struct socket *xprt_create_socket(struct rpc_xprt *, int, int); -static void xprt_bind_socket(struct rpc_xprt *, struct socket *); static int __xprt_get_cong(struct rpc_xprt *, struct rpc_task *); static int xprt_clear_backlog(struct rpc_xprt *xprt); -#ifdef RPC_DEBUG_DATA -/* - * Print the buffer contents (first 128 bytes only--just enough for - * diropres return). - */ -static void -xprt_pktdump(char *msg, u32 *packet, unsigned int count) -{ - u8 *buf = (u8 *) packet; - int j; - - dprintk("RPC: %s\n", msg); - for (j = 0; j < count && j < 128; j += 4) { - if (!(j & 31)) { - if (j) - dprintk("\n"); - dprintk("0x%04x ", j); - } - dprintk("%02x%02x%02x%02x ", - buf[j], buf[j+1], buf[j+2], buf[j+3]); - } - dprintk("\n"); -} -#else -static inline void -xprt_pktdump(char *msg, u32 *packet, unsigned int count) -{ - /* NOP */ -} -#endif - -/* - * Look up RPC transport given an INET socket - */ -static inline struct rpc_xprt * -xprt_from_sock(struct sock *sk) -{ - return (struct rpc_xprt *) sk->sk_user_data; -} - /* * Serialize write access to sockets, in order to prevent different * requests from interfering with each other. @@ -234,62 +166,6 @@ xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) spin_unlock_bh(&xprt->sock_lock); } -/* - * Write data to socket. - */ -static inline int -xprt_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) -{ - struct socket *sock = xprt->sock; - struct xdr_buf *xdr = &req->rq_snd_buf; - struct sockaddr *addr = NULL; - int addrlen = 0; - unsigned int skip; - int result; - - if (!sock) - return -ENOTCONN; - - xprt_pktdump("packet data:", - req->rq_svec->iov_base, - req->rq_svec->iov_len); - - /* For UDP, we need to provide an address */ - if (!xprt->stream) { - addr = (struct sockaddr *) &xprt->addr; - addrlen = sizeof(xprt->addr); - } - /* Dont repeat bytes */ - skip = req->rq_bytes_sent; - - clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags); - result = xdr_sendpages(sock, addr, addrlen, xdr, skip, MSG_DONTWAIT); - - dprintk("RPC: xprt_sendmsg(%d) = %d\n", xdr->len - skip, result); - - if (result >= 0) - return result; - - switch (result) { - case -ECONNREFUSED: - /* When the server has died, an ICMP port unreachable message - * prompts ECONNREFUSED. - */ - case -EAGAIN: - break; - case -ECONNRESET: - case -ENOTCONN: - case -EPIPE: - /* connection broken */ - if (xprt->stream) - result = -ENOTCONN; - break; - default: - printk(KERN_NOTICE "RPC: sendmsg returned error %d\n", -result); - } - return result; -} - /* * Van Jacobson congestion avoidance. Check if the congestion window * overflowed. Put the task to sleep if this is the case. @@ -405,48 +281,20 @@ int xprt_adjust_timeout(struct rpc_rqst *req) return status; } -/* - * Close down a transport socket - */ -static void -xprt_close(struct rpc_xprt *xprt) -{ - struct socket *sock = xprt->sock; - struct sock *sk = xprt->inet; - - if (!sk) - return; - - write_lock_bh(&sk->sk_callback_lock); - xprt->inet = NULL; - xprt->sock = NULL; - - sk->sk_user_data = NULL; - sk->sk_data_ready = xprt->old_data_ready; - sk->sk_state_change = xprt->old_state_change; - sk->sk_write_space = xprt->old_write_space; - write_unlock_bh(&sk->sk_callback_lock); - - sk->sk_no_check = 0; - - sock_release(sock); -} - static void xprt_socket_autoclose(void *args) { struct rpc_xprt *xprt = (struct rpc_xprt *)args; xprt_disconnect(xprt); - xprt_close(xprt); + xprt->ops->close(xprt); xprt_release_write(xprt, NULL); } /* * Mark a transport as disconnected */ -static void -xprt_disconnect(struct rpc_xprt *xprt) +void xprt_disconnect(struct rpc_xprt *xprt) { dprintk("RPC: disconnected transport %p\n", xprt); spin_lock_bh(&xprt->sock_lock); @@ -479,57 +327,6 @@ xprt_init_autodisconnect(unsigned long data) spin_unlock(&xprt->sock_lock); } -static void xprt_socket_connect(void *args) -{ - struct rpc_xprt *xprt = (struct rpc_xprt *)args; - struct socket *sock = xprt->sock; - int status = -EIO; - - if (xprt->shutdown || xprt->addr.sin_port == 0) - goto out; - - /* - * Start by resetting any existing state - */ - xprt_close(xprt); - sock = xprt_create_socket(xprt, xprt->prot, xprt->resvport); - if (sock == NULL) { - /* couldn't create socket or bind to reserved port; - * this is likely a permanent error, so cause an abort */ - goto out; - } - xprt_bind_socket(xprt, sock); - xprt_sock_setbufsize(xprt); - - status = 0; - if (!xprt->stream) - goto out; - - /* - * Tell the socket layer to start connecting... - */ - status = sock->ops->connect(sock, (struct sockaddr *) &xprt->addr, - sizeof(xprt->addr), O_NONBLOCK); - dprintk("RPC: %p connect status %d connected %d sock state %d\n", - xprt, -status, xprt_connected(xprt), sock->sk->sk_state); - if (status < 0) { - switch (status) { - case -EINPROGRESS: - case -EALREADY: - goto out_clear; - } - } -out: - if (status < 0) - rpc_wake_up_status(&xprt->pending, status); - else - rpc_wake_up(&xprt->pending); -out_clear: - smp_mb__before_clear_bit(); - clear_bit(XPRT_CONNECTING, &xprt->sockstate); - smp_mb__after_clear_bit(); -} - /* * Attempt to connect a TCP socket. * @@ -552,30 +349,16 @@ void xprt_connect(struct rpc_task *task) if (!xprt_lock_write(xprt, task)) return; if (xprt_connected(xprt)) - goto out_write; + xprt_release_write(xprt, task); + else { + if (task->tk_rqstp) + task->tk_rqstp->rq_bytes_sent = 0; - if (task->tk_rqstp) - task->tk_rqstp->rq_bytes_sent = 0; - - task->tk_timeout = RPC_CONNECT_TIMEOUT; - rpc_sleep_on(&xprt->pending, task, xprt_connect_status, NULL); - if (!test_and_set_bit(XPRT_CONNECTING, &xprt->sockstate)) { - /* Note: if we are here due to a dropped connection - * we delay reconnecting by RPC_REESTABLISH_TIMEOUT/HZ - * seconds - */ - if (xprt->sock != NULL) - schedule_delayed_work(&xprt->sock_connect, - RPC_REESTABLISH_TIMEOUT); - else { - schedule_work(&xprt->sock_connect); - if (!RPC_IS_ASYNC(task)) - flush_scheduled_work(); - } + task->tk_timeout = RPC_CONNECT_TIMEOUT; + rpc_sleep_on(&xprt->pending, task, xprt_connect_status, NULL); + xprt->ops->connect(task); } return; - out_write: - xprt_release_write(xprt, task); } /* @@ -624,8 +407,7 @@ xprt_connect_status(struct rpc_task *task) /* * Look up the RPC request corresponding to a reply, and then lock it. */ -static inline struct rpc_rqst * -xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid) +struct rpc_rqst *xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid) { struct list_head *pos; struct rpc_rqst *req = NULL; @@ -644,8 +426,7 @@ xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid) * Complete reply received. * The TCP code relies on us to remove the request from xprt->pending. */ -static void -xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied) +void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied) { struct rpc_task *task = req->rq_task; struct rpc_clnt *clnt = task->tk_client; @@ -691,409 +472,6 @@ xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied) return; } -/* - * Input handler for RPC replies. Called from a bottom half and hence - * atomic. - */ -static void -udp_data_ready(struct sock *sk, int len) -{ - struct rpc_task *task; - struct rpc_xprt *xprt; - struct rpc_rqst *rovr; - struct sk_buff *skb; - int err, repsize, copied; - u32 _xid, *xp; - - read_lock(&sk->sk_callback_lock); - dprintk("RPC: udp_data_ready...\n"); - if (!(xprt = xprt_from_sock(sk))) { - printk("RPC: udp_data_ready request not found!\n"); - goto out; - } - - dprintk("RPC: udp_data_ready client %p\n", xprt); - - if ((skb = skb_recv_datagram(sk, 0, 1, &err)) == NULL) - goto out; - - if (xprt->shutdown) - goto dropit; - - repsize = skb->len - sizeof(struct udphdr); - if (repsize < 4) { - printk("RPC: impossible RPC reply size %d!\n", repsize); - goto dropit; - } - - /* Copy the XID from the skb... */ - xp = skb_header_pointer(skb, sizeof(struct udphdr), - sizeof(_xid), &_xid); - if (xp == NULL) - goto dropit; - - /* Look up and lock the request corresponding to the given XID */ - spin_lock(&xprt->sock_lock); - rovr = xprt_lookup_rqst(xprt, *xp); - if (!rovr) - goto out_unlock; - task = rovr->rq_task; - - dprintk("RPC: %4d received reply\n", task->tk_pid); - - if ((copied = rovr->rq_private_buf.buflen) > repsize) - copied = repsize; - - /* Suck it into the iovec, verify checksum if not done by hw. */ - if (csum_partial_copy_to_xdr(&rovr->rq_private_buf, skb)) - goto out_unlock; - - /* Something worked... */ - dst_confirm(skb->dst); - - xprt_complete_rqst(xprt, rovr, copied); - - out_unlock: - spin_unlock(&xprt->sock_lock); - dropit: - skb_free_datagram(sk, skb); - out: - read_unlock(&sk->sk_callback_lock); -} - -/* - * Copy from an skb into memory and shrink the skb. - */ -static inline size_t -tcp_copy_data(skb_reader_t *desc, void *p, size_t len) -{ - if (len > desc->count) - len = desc->count; - if (skb_copy_bits(desc->skb, desc->offset, p, len)) { - dprintk("RPC: failed to copy %zu bytes from skb. %zu bytes remain\n", - len, desc->count); - return 0; - } - desc->offset += len; - desc->count -= len; - dprintk("RPC: copied %zu bytes from skb. %zu bytes remain\n", - len, desc->count); - return len; -} - -/* - * TCP read fragment marker - */ -static inline void -tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc) -{ - size_t len, used; - char *p; - - p = ((char *) &xprt->tcp_recm) + xprt->tcp_offset; - len = sizeof(xprt->tcp_recm) - xprt->tcp_offset; - used = tcp_copy_data(desc, p, len); - xprt->tcp_offset += used; - if (used != len) - return; - xprt->tcp_reclen = ntohl(xprt->tcp_recm); - if (xprt->tcp_reclen & 0x80000000) - xprt->tcp_flags |= XPRT_LAST_FRAG; - else - xprt->tcp_flags &= ~XPRT_LAST_FRAG; - xprt->tcp_reclen &= 0x7fffffff; - xprt->tcp_flags &= ~XPRT_COPY_RECM; - xprt->tcp_offset = 0; - /* Sanity check of the record length */ - if (xprt->tcp_reclen < 4) { - printk(KERN_ERR "RPC: Invalid TCP record fragment length\n"); - xprt_disconnect(xprt); - } - dprintk("RPC: reading TCP record fragment of length %d\n", - xprt->tcp_reclen); -} - -static void -tcp_check_recm(struct rpc_xprt *xprt) -{ - dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u, tcp_flags = %lx\n", - xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen, xprt->tcp_flags); - if (xprt->tcp_offset == xprt->tcp_reclen) { - xprt->tcp_flags |= XPRT_COPY_RECM; - xprt->tcp_offset = 0; - if (xprt->tcp_flags & XPRT_LAST_FRAG) { - xprt->tcp_flags &= ~XPRT_COPY_DATA; - xprt->tcp_flags |= XPRT_COPY_XID; - xprt->tcp_copied = 0; - } - } -} - -/* - * TCP read xid - */ -static inline void -tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc) -{ - size_t len, used; - char *p; - - len = sizeof(xprt->tcp_xid) - xprt->tcp_offset; - dprintk("RPC: reading XID (%Zu bytes)\n", len); - p = ((char *) &xprt->tcp_xid) + xprt->tcp_offset; - used = tcp_copy_data(desc, p, len); - xprt->tcp_offset += used; - if (used != len) - return; - xprt->tcp_flags &= ~XPRT_COPY_XID; - xprt->tcp_flags |= XPRT_COPY_DATA; - xprt->tcp_copied = 4; - dprintk("RPC: reading reply for XID %08x\n", - ntohl(xprt->tcp_xid)); - tcp_check_recm(xprt); -} - -/* - * TCP read and complete request - */ -static inline void -tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc) -{ - struct rpc_rqst *req; - struct xdr_buf *rcvbuf; - size_t len; - ssize_t r; - - /* Find and lock the request corresponding to this xid */ - spin_lock(&xprt->sock_lock); - req = xprt_lookup_rqst(xprt, xprt->tcp_xid); - if (!req) { - xprt->tcp_flags &= ~XPRT_COPY_DATA; - dprintk("RPC: XID %08x request not found!\n", - ntohl(xprt->tcp_xid)); - spin_unlock(&xprt->sock_lock); - return; - } - - rcvbuf = &req->rq_private_buf; - len = desc->count; - if (len > xprt->tcp_reclen - xprt->tcp_offset) { - skb_reader_t my_desc; - - len = xprt->tcp_reclen - xprt->tcp_offset; - memcpy(&my_desc, desc, sizeof(my_desc)); - my_desc.count = len; - r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied, - &my_desc, tcp_copy_data); - desc->count -= r; - desc->offset += r; - } else - r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied, - desc, tcp_copy_data); - - if (r > 0) { - xprt->tcp_copied += r; - xprt->tcp_offset += r; - } - if (r != len) { - /* Error when copying to the receive buffer, - * usually because we weren't able to allocate - * additional buffer pages. All we can do now - * is turn off XPRT_COPY_DATA, so the request - * will not receive any additional updates, - * and time out. - * Any remaining data from this record will - * be discarded. - */ - xprt->tcp_flags &= ~XPRT_COPY_DATA; - dprintk("RPC: XID %08x truncated request\n", - ntohl(xprt->tcp_xid)); - dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n", - xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen); - goto out; - } - - dprintk("RPC: XID %08x read %Zd bytes\n", - ntohl(xprt->tcp_xid), r); - dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n", - xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen); - - if (xprt->tcp_copied == req->rq_private_buf.buflen) - xprt->tcp_flags &= ~XPRT_COPY_DATA; - else if (xprt->tcp_offset == xprt->tcp_reclen) { - if (xprt->tcp_flags & XPRT_LAST_FRAG) - xprt->tcp_flags &= ~XPRT_COPY_DATA; - } - -out: - if (!(xprt->tcp_flags & XPRT_COPY_DATA)) { - dprintk("RPC: %4d received reply complete\n", - req->rq_task->tk_pid); - xprt_complete_rqst(xprt, req, xprt->tcp_copied); - } - spin_unlock(&xprt->sock_lock); - tcp_check_recm(xprt); -} - -/* - * TCP discard extra bytes from a short read - */ -static inline void -tcp_read_discard(struct rpc_xprt *xprt, skb_reader_t *desc) -{ - size_t len; - - len = xprt->tcp_reclen - xprt->tcp_offset; - if (len > desc->count) - len = desc->count; - desc->count -= len; - desc->offset += len; - xprt->tcp_offset += len; - dprintk("RPC: discarded %Zu bytes\n", len); - tcp_check_recm(xprt); -} - -/* - * TCP record receive routine - * We first have to grab the record marker, then the XID, then the data. - */ -static int -tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, - unsigned int offset, size_t len) -{ - struct rpc_xprt *xprt = rd_desc->arg.data; - skb_reader_t desc = { - .skb = skb, - .offset = offset, - .count = len, - .csum = 0 - }; - - dprintk("RPC: tcp_data_recv\n"); - do { - /* Read in a new fragment marker if necessary */ - /* Can we ever really expect to get completely empty fragments? */ - if (xprt->tcp_flags & XPRT_COPY_RECM) { - tcp_read_fraghdr(xprt, &desc); - continue; - } - /* Read in the xid if necessary */ - if (xprt->tcp_flags & XPRT_COPY_XID) { - tcp_read_xid(xprt, &desc); - continue; - } - /* Read in the request data */ - if (xprt->tcp_flags & XPRT_COPY_DATA) { - tcp_read_request(xprt, &desc); - continue; - } - /* Skip over any trailing bytes on short reads */ - tcp_read_discard(xprt, &desc); - } while (desc.count); - dprintk("RPC: tcp_data_recv done\n"); - return len - desc.count; -} - -static void tcp_data_ready(struct sock *sk, int bytes) -{ - struct rpc_xprt *xprt; - read_descriptor_t rd_desc; - - read_lock(&sk->sk_callback_lock); - dprintk("RPC: tcp_data_ready...\n"); - if (!(xprt = xprt_from_sock(sk))) { - printk("RPC: tcp_data_ready socket info not found!\n"); - goto out; - } - if (xprt->shutdown) - goto out; - - /* We use rd_desc to pass struct xprt to tcp_data_recv */ - rd_desc.arg.data = xprt; - rd_desc.count = 65536; - tcp_read_sock(sk, &rd_desc, tcp_data_recv); -out: - read_unlock(&sk->sk_callback_lock); -} - -static void -tcp_state_change(struct sock *sk) -{ - struct rpc_xprt *xprt; - - read_lock(&sk->sk_callback_lock); - if (!(xprt = xprt_from_sock(sk))) - goto out; - dprintk("RPC: tcp_state_change client %p...\n", xprt); - dprintk("RPC: state %x conn %d dead %d zapped %d\n", - sk->sk_state, xprt_connected(xprt), - sock_flag(sk, SOCK_DEAD), - sock_flag(sk, SOCK_ZAPPED)); - - switch (sk->sk_state) { - case TCP_ESTABLISHED: - spin_lock_bh(&xprt->sock_lock); - if (!xprt_test_and_set_connected(xprt)) { - /* Reset TCP record info */ - xprt->tcp_offset = 0; - xprt->tcp_reclen = 0; - xprt->tcp_copied = 0; - xprt->tcp_flags = XPRT_COPY_RECM | XPRT_COPY_XID; - rpc_wake_up(&xprt->pending); - } - spin_unlock_bh(&xprt->sock_lock); - break; - case TCP_SYN_SENT: - case TCP_SYN_RECV: - break; - default: - xprt_disconnect(xprt); - break; - } - out: - read_unlock(&sk->sk_callback_lock); -} - -/* - * Called when more output buffer space is available for this socket. - * We try not to wake our writers until they can make "significant" - * progress, otherwise we'll waste resources thrashing sock_sendmsg - * with a bunch of small requests. - */ -static void -xprt_write_space(struct sock *sk) -{ - struct rpc_xprt *xprt; - struct socket *sock; - - read_lock(&sk->sk_callback_lock); - if (!(xprt = xprt_from_sock(sk)) || !(sock = sk->sk_socket)) - goto out; - if (xprt->shutdown) - goto out; - - /* Wait until we have enough socket memory */ - if (xprt->stream) { - /* from net/core/stream.c:sk_stream_write_space */ - if (sk_stream_wspace(sk) < sk_stream_min_wspace(sk)) - goto out; - } else { - /* from net/core/sock.c:sock_def_write_space */ - if (!sock_writeable(sk)) - goto out; - } - - if (!test_and_clear_bit(SOCK_NOSPACE, &sock->flags)) - goto out; - - spin_lock_bh(&xprt->sock_lock); - if (xprt->snd_task) - rpc_wake_up_task(xprt->snd_task); - spin_unlock_bh(&xprt->sock_lock); -out: - read_unlock(&sk->sk_callback_lock); -} - /* * RPC receive timeout handler. */ @@ -1161,19 +539,10 @@ xprt_transmit(struct rpc_task *task) struct rpc_clnt *clnt = task->tk_client; struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; - int status, retry = 0; - + int status; dprintk("RPC: %4d xprt_transmit(%u)\n", task->tk_pid, req->rq_slen); - /* set up everything as needed. */ - /* Write the record marker */ - if (xprt->stream) { - u32 *marker = req->rq_svec[0].iov_base; - - *marker = htonl(0x80000000|(req->rq_slen-sizeof(*marker))); - } - smp_rmb(); if (!req->rq_received) { if (list_empty(&req->rq_list)) { @@ -1191,41 +560,9 @@ xprt_transmit(struct rpc_task *task) } else if (!req->rq_bytes_sent) return; - /* Continue transmitting the packet/record. We must be careful - * to cope with writespace callbacks arriving _after_ we have - * called xprt_sendmsg(). - */ - while (1) { - req->rq_xtime = jiffies; - status = xprt_sendmsg(xprt, req); - - if (status < 0) - break; - - if (xprt->stream) { - req->rq_bytes_sent += status; - - /* If we've sent the entire packet, immediately - * reset the count of bytes sent. */ - if (req->rq_bytes_sent >= req->rq_slen) { - req->rq_bytes_sent = 0; - goto out_receive; - } - } else { - if (status >= req->rq_slen) - goto out_receive; - status = -EAGAIN; - break; - } - - dprintk("RPC: %4d xmit incomplete (%d left of %d)\n", - task->tk_pid, req->rq_slen - req->rq_bytes_sent, - req->rq_slen); - - status = -EAGAIN; - if (retry++ > 50) - break; - } + status = xprt->ops->send_request(task); + if (!status) + goto out_receive; /* Note: at this point, task->tk_sleeping has not yet been set, * hence there is no danger of the waking up task being put on @@ -1234,26 +571,10 @@ xprt_transmit(struct rpc_task *task) task->tk_status = status; switch (status) { - case -EAGAIN: - if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) { - /* Protect against races with xprt_write_space */ - spin_lock_bh(&xprt->sock_lock); - /* Don't race with disconnect */ - if (!xprt_connected(xprt)) - task->tk_status = -ENOTCONN; - else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags)) { - task->tk_timeout = req->rq_timeout; - rpc_sleep_on(&xprt->pending, task, NULL, NULL); - } - spin_unlock_bh(&xprt->sock_lock); - return; - } - /* Keep holding the socket if it is blocked */ - rpc_delay(task, HZ>>4); - return; case -ECONNREFUSED: task->tk_timeout = RPC_REESTABLISH_TIMEOUT; rpc_sleep_on(&xprt->sending, task, NULL, NULL); + case -EAGAIN: case -ENOTCONN: return; default: @@ -1367,7 +688,8 @@ xprt_release(struct rpc_task *task) list_del(&req->rq_list); xprt->last_used = jiffies; if (list_empty(&xprt->recv) && !xprt->shutdown) - mod_timer(&xprt->timer, xprt->last_used + XPRT_IDLE_TIMEOUT); + mod_timer(&xprt->timer, + xprt->last_used + RPC_IDLE_DISCONNECT_TIMEOUT); spin_unlock_bh(&xprt->sock_lock); task->tk_rqstp = NULL; memset(req, 0, sizeof(*req)); /* mark unused */ @@ -1380,18 +702,6 @@ xprt_release(struct rpc_task *task) spin_unlock(&xprt->xprt_lock); } -/* - * Set default timeout parameters - */ -static void -xprt_default_timeout(struct rpc_timeout *to, int proto) -{ - if (proto == IPPROTO_UDP) - xprt_set_timeout(to, 5, 5 * HZ); - else - xprt_set_timeout(to, 2, 60 * HZ); -} - /* * Set constant timeout */ @@ -1405,68 +715,51 @@ xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr) to->to_exponential = 0; } -unsigned int xprt_udp_slot_table_entries = RPC_DEF_SLOT_TABLE; -unsigned int xprt_tcp_slot_table_entries = RPC_DEF_SLOT_TABLE; - /* * Initialize an RPC client */ static struct rpc_xprt * xprt_setup(int proto, struct sockaddr_in *ap, struct rpc_timeout *to) { + int result; struct rpc_xprt *xprt; - unsigned int entries; - size_t slot_table_size; struct rpc_rqst *req; - dprintk("RPC: setting up %s transport...\n", - proto == IPPROTO_UDP? "UDP" : "TCP"); - - entries = (proto == IPPROTO_TCP)? - xprt_tcp_slot_table_entries : xprt_udp_slot_table_entries; - if ((xprt = kmalloc(sizeof(struct rpc_xprt), GFP_KERNEL)) == NULL) return ERR_PTR(-ENOMEM); memset(xprt, 0, sizeof(*xprt)); /* Nnnngh! */ - xprt->max_reqs = entries; - slot_table_size = entries * sizeof(xprt->slot[0]); - xprt->slot = kmalloc(slot_table_size, GFP_KERNEL); - if (xprt->slot == NULL) { - kfree(xprt); - return ERR_PTR(-ENOMEM); - } - memset(xprt->slot, 0, slot_table_size); xprt->addr = *ap; - xprt->prot = proto; - xprt->stream = (proto == IPPROTO_TCP)? 1 : 0; - if (xprt->stream) { - xprt->cwnd = RPC_MAXCWND(xprt); - xprt->nocong = 1; - xprt->max_payload = (1U << 31) - 1; - } else { - xprt->cwnd = RPC_INITCWND; - xprt->max_payload = (1U << 16) - (MAX_HEADER << 3); + + switch (proto) { + case IPPROTO_UDP: + result = xs_setup_udp(xprt, to); + break; + case IPPROTO_TCP: + result = xs_setup_tcp(xprt, to); + break; + default: + printk(KERN_ERR "RPC: unrecognized transport protocol: %d\n", + proto); + result = -EIO; + break; + } + if (result) { + kfree(xprt); + return ERR_PTR(result); } + spin_lock_init(&xprt->sock_lock); spin_lock_init(&xprt->xprt_lock); init_waitqueue_head(&xprt->cong_wait); INIT_LIST_HEAD(&xprt->free); INIT_LIST_HEAD(&xprt->recv); - INIT_WORK(&xprt->sock_connect, xprt_socket_connect, xprt); INIT_WORK(&xprt->task_cleanup, xprt_socket_autoclose, xprt); init_timer(&xprt->timer); xprt->timer.function = xprt_init_autodisconnect; xprt->timer.data = (unsigned long) xprt; xprt->last_used = jiffies; - xprt->port = XPRT_MAX_RESVPORT; - - /* Set timeout parameters */ - if (to) { - xprt->timeout = *to; - } else - xprt_default_timeout(&xprt->timeout, xprt->prot); rpc_init_wait_queue(&xprt->pending, "xprt_pending"); rpc_init_wait_queue(&xprt->sending, "xprt_sending"); @@ -1474,134 +767,17 @@ xprt_setup(int proto, struct sockaddr_in *ap, struct rpc_timeout *to) rpc_init_priority_wait_queue(&xprt->backlog, "xprt_backlog"); /* initialize free list */ - for (req = &xprt->slot[entries-1]; req >= &xprt->slot[0]; req--) + for (req = &xprt->slot[xprt->max_reqs-1]; req >= &xprt->slot[0]; req--) list_add(&req->rq_list, &xprt->free); xprt_init_xid(xprt); - /* Check whether we want to use a reserved port */ - xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; - dprintk("RPC: created transport %p with %u slots\n", xprt, xprt->max_reqs); return xprt; } -/* - * Bind to a reserved port - */ -static inline int xprt_bindresvport(struct rpc_xprt *xprt, struct socket *sock) -{ - struct sockaddr_in myaddr = { - .sin_family = AF_INET, - }; - int err, port; - - /* Were we already bound to a given port? Try to reuse it */ - port = xprt->port; - do { - myaddr.sin_port = htons(port); - err = sock->ops->bind(sock, (struct sockaddr *) &myaddr, - sizeof(myaddr)); - if (err == 0) { - xprt->port = port; - return 0; - } - if (--port == 0) - port = XPRT_MAX_RESVPORT; - } while (err == -EADDRINUSE && port != xprt->port); - - printk("RPC: Can't bind to reserved port (%d).\n", -err); - return err; -} - -static void -xprt_bind_socket(struct rpc_xprt *xprt, struct socket *sock) -{ - struct sock *sk = sock->sk; - - if (xprt->inet) - return; - - write_lock_bh(&sk->sk_callback_lock); - sk->sk_user_data = xprt; - xprt->old_data_ready = sk->sk_data_ready; - xprt->old_state_change = sk->sk_state_change; - xprt->old_write_space = sk->sk_write_space; - if (xprt->prot == IPPROTO_UDP) { - sk->sk_data_ready = udp_data_ready; - sk->sk_no_check = UDP_CSUM_NORCV; - xprt_set_connected(xprt); - } else { - tcp_sk(sk)->nonagle = 1; /* disable Nagle's algorithm */ - sk->sk_data_ready = tcp_data_ready; - sk->sk_state_change = tcp_state_change; - xprt_clear_connected(xprt); - } - sk->sk_write_space = xprt_write_space; - - /* Reset to new socket */ - xprt->sock = sock; - xprt->inet = sk; - write_unlock_bh(&sk->sk_callback_lock); - - return; -} - -/* - * Set socket buffer length - */ -void -xprt_sock_setbufsize(struct rpc_xprt *xprt) -{ - struct sock *sk = xprt->inet; - - if (xprt->stream) - return; - if (xprt->rcvsize) { - sk->sk_userlocks |= SOCK_RCVBUF_LOCK; - sk->sk_rcvbuf = xprt->rcvsize * xprt->max_reqs * 2; - } - if (xprt->sndsize) { - sk->sk_userlocks |= SOCK_SNDBUF_LOCK; - sk->sk_sndbuf = xprt->sndsize * xprt->max_reqs * 2; - sk->sk_write_space(sk); - } -} - -/* - * Datastream sockets are created here, but xprt_connect will create - * and connect stream sockets. - */ -static struct socket * xprt_create_socket(struct rpc_xprt *xprt, int proto, int resvport) -{ - struct socket *sock; - int type, err; - - dprintk("RPC: xprt_create_socket(%s %d)\n", - (proto == IPPROTO_UDP)? "udp" : "tcp", proto); - - type = (proto == IPPROTO_UDP)? SOCK_DGRAM : SOCK_STREAM; - - if ((err = sock_create_kern(PF_INET, type, proto, &sock)) < 0) { - printk("RPC: can't create socket (%d).\n", -err); - return NULL; - } - - /* If the caller has the capability, bind to a reserved port */ - if (resvport && xprt_bindresvport(xprt, sock) < 0) { - printk("RPC: can't bind to reserved port.\n"); - goto failed; - } - - return sock; - -failed: - sock_release(sock); - return NULL; -} - /* * Create an RPC client transport given the protocol and peer address. */ @@ -1631,10 +807,6 @@ xprt_shutdown(struct rpc_xprt *xprt) rpc_wake_up(&xprt->backlog); wake_up(&xprt->cong_wait); del_timer_sync(&xprt->timer); - - /* synchronously wait for connect worker to finish */ - cancel_delayed_work(&xprt->sock_connect); - flush_scheduled_work(); } /* @@ -1655,9 +827,7 @@ xprt_destroy(struct rpc_xprt *xprt) { dprintk("RPC: destroying transport %p\n", xprt); xprt_shutdown(xprt); - xprt_disconnect(xprt); - xprt_close(xprt); - kfree(xprt->slot); + xprt->ops->destroy(xprt); kfree(xprt); return 0; diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c new file mode 100644 index 000000000000..fa1180ac4823 --- /dev/null +++ b/net/sunrpc/xprtsock.c @@ -0,0 +1,1021 @@ +/* + * linux/net/sunrpc/xprtsock.c + * + * Client-side transport implementation for sockets. + * + * TCP callback races fixes (C) 1998 Red Hat Software + * TCP send fixes (C) 1998 Red Hat Software + * TCP NFS related read + write fixes + * (C) 1999 Dave Airlie, University of Limerick, Ireland + * + * Rewrite of larges part of the code in order to stabilize TCP stuff. + * Fix behaviour when socket buffer is full. + * (C) 1999 Trond Myklebust + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#ifdef RPC_DEBUG +# undef RPC_DEBUG_DATA +# define RPCDBG_FACILITY RPCDBG_XPRT +#endif + +#define XPRT_MAX_RESVPORT (800) + +#ifdef RPC_DEBUG_DATA +/* + * Print the buffer contents (first 128 bytes only--just enough for + * diropres return). + */ +static void +xprt_pktdump(char *msg, u32 *packet, unsigned int count) +{ + u8 *buf = (u8 *) packet; + int j; + + dprintk("RPC: %s\n", msg); + for (j = 0; j < count && j < 128; j += 4) { + if (!(j & 31)) { + if (j) + dprintk("\n"); + dprintk("0x%04x ", j); + } + dprintk("%02x%02x%02x%02x ", + buf[j], buf[j+1], buf[j+2], buf[j+3]); + } + dprintk("\n"); +} +#else +static inline void +xprt_pktdump(char *msg, u32 *packet, unsigned int count) +{ + /* NOP */ +} +#endif + +/* + * Look up RPC transport given an INET socket + */ +static inline struct rpc_xprt * +xprt_from_sock(struct sock *sk) +{ + return (struct rpc_xprt *) sk->sk_user_data; +} + +static int +xdr_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, + struct xdr_buf *xdr, unsigned int base, int msgflags) +{ + struct page **ppage = xdr->pages; + unsigned int len, pglen = xdr->page_len; + int err, ret = 0; + ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int); + + len = xdr->head[0].iov_len; + if (base < len || (addr != NULL && base == 0)) { + struct kvec iov = { + .iov_base = xdr->head[0].iov_base + base, + .iov_len = len - base, + }; + struct msghdr msg = { + .msg_name = addr, + .msg_namelen = addrlen, + .msg_flags = msgflags, + }; + if (xdr->len > len) + msg.msg_flags |= MSG_MORE; + + if (iov.iov_len != 0) + err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); + else + err = kernel_sendmsg(sock, &msg, NULL, 0, 0); + if (ret == 0) + ret = err; + else if (err > 0) + ret += err; + if (err != iov.iov_len) + goto out; + base = 0; + } else + base -= len; + + if (pglen == 0) + goto copy_tail; + if (base >= pglen) { + base -= pglen; + goto copy_tail; + } + if (base || xdr->page_base) { + pglen -= base; + base += xdr->page_base; + ppage += base >> PAGE_CACHE_SHIFT; + base &= ~PAGE_CACHE_MASK; + } + + sendpage = sock->ops->sendpage ? : sock_no_sendpage; + do { + int flags = msgflags; + + len = PAGE_CACHE_SIZE; + if (base) + len -= base; + if (pglen < len) + len = pglen; + + if (pglen != len || xdr->tail[0].iov_len != 0) + flags |= MSG_MORE; + + /* Hmm... We might be dealing with highmem pages */ + if (PageHighMem(*ppage)) + sendpage = sock_no_sendpage; + err = sendpage(sock, *ppage, base, len, flags); + if (ret == 0) + ret = err; + else if (err > 0) + ret += err; + if (err != len) + goto out; + base = 0; + ppage++; + } while ((pglen -= len) != 0); +copy_tail: + len = xdr->tail[0].iov_len; + if (base < len) { + struct kvec iov = { + .iov_base = xdr->tail[0].iov_base + base, + .iov_len = len - base, + }; + struct msghdr msg = { + .msg_flags = msgflags, + }; + err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); + if (ret == 0) + ret = err; + else if (err > 0) + ret += err; + } +out: + return ret; +} + +/* + * Write data to socket. + */ +static inline int +xprt_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) +{ + struct socket *sock = xprt->sock; + struct xdr_buf *xdr = &req->rq_snd_buf; + struct sockaddr *addr = NULL; + int addrlen = 0; + unsigned int skip; + int result; + + if (!sock) + return -ENOTCONN; + + xprt_pktdump("packet data:", + req->rq_svec->iov_base, + req->rq_svec->iov_len); + + /* For UDP, we need to provide an address */ + if (!xprt->stream) { + addr = (struct sockaddr *) &xprt->addr; + addrlen = sizeof(xprt->addr); + } + /* Dont repeat bytes */ + skip = req->rq_bytes_sent; + + clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags); + result = xdr_sendpages(sock, addr, addrlen, xdr, skip, MSG_DONTWAIT); + + dprintk("RPC: xprt_sendmsg(%d) = %d\n", xdr->len - skip, result); + + if (result >= 0) + return result; + + switch (result) { + case -ECONNREFUSED: + /* When the server has died, an ICMP port unreachable message + * prompts ECONNREFUSED. + */ + case -EAGAIN: + break; + case -ECONNRESET: + case -ENOTCONN: + case -EPIPE: + /* connection broken */ + if (xprt->stream) + result = -ENOTCONN; + break; + default: + printk(KERN_NOTICE "RPC: sendmsg returned error %d\n", -result); + } + return result; +} + +static int +xprt_send_request(struct rpc_task *task) +{ + struct rpc_rqst *req = task->tk_rqstp; + struct rpc_xprt *xprt = req->rq_xprt; + int status, retry = 0; + + /* set up everything as needed. */ + /* Write the record marker */ + if (xprt->stream) { + u32 *marker = req->rq_svec[0].iov_base; + + *marker = htonl(0x80000000|(req->rq_slen-sizeof(*marker))); + } + + /* Continue transmitting the packet/record. We must be careful + * to cope with writespace callbacks arriving _after_ we have + * called xprt_sendmsg(). + */ + while (1) { + req->rq_xtime = jiffies; + status = xprt_sendmsg(xprt, req); + + if (status < 0) + break; + + if (xprt->stream) { + req->rq_bytes_sent += status; + + /* If we've sent the entire packet, immediately + * reset the count of bytes sent. */ + if (req->rq_bytes_sent >= req->rq_slen) { + req->rq_bytes_sent = 0; + return 0; + } + } else { + if (status >= req->rq_slen) + return 0; + status = -EAGAIN; + break; + } + + dprintk("RPC: %4d xmit incomplete (%d left of %d)\n", + task->tk_pid, req->rq_slen - req->rq_bytes_sent, + req->rq_slen); + + status = -EAGAIN; + if (retry++ > 50) + break; + } + + if (status == -EAGAIN) { + if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) { + /* Protect against races with xprt_write_space */ + spin_lock_bh(&xprt->sock_lock); + /* Don't race with disconnect */ + if (!xprt_connected(xprt)) + task->tk_status = -ENOTCONN; + else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags)) { + task->tk_timeout = req->rq_timeout; + rpc_sleep_on(&xprt->pending, task, NULL, NULL); + } + spin_unlock_bh(&xprt->sock_lock); + return status; + } + /* Keep holding the socket if it is blocked */ + rpc_delay(task, HZ>>4); + } + return status; +} + +/* + * Close down a transport socket + */ +static void +xprt_close(struct rpc_xprt *xprt) +{ + struct socket *sock = xprt->sock; + struct sock *sk = xprt->inet; + + if (!sk) + return; + + write_lock_bh(&sk->sk_callback_lock); + xprt->inet = NULL; + xprt->sock = NULL; + + sk->sk_user_data = NULL; + sk->sk_data_ready = xprt->old_data_ready; + sk->sk_state_change = xprt->old_state_change; + sk->sk_write_space = xprt->old_write_space; + write_unlock_bh(&sk->sk_callback_lock); + + sk->sk_no_check = 0; + + sock_release(sock); +} + +static void xprt_socket_destroy(struct rpc_xprt *xprt) +{ + cancel_delayed_work(&xprt->sock_connect); + flush_scheduled_work(); + + xprt_disconnect(xprt); + xprt_close(xprt); + kfree(xprt->slot); +} + +/* + * Input handler for RPC replies. Called from a bottom half and hence + * atomic. + */ +static void +udp_data_ready(struct sock *sk, int len) +{ + struct rpc_task *task; + struct rpc_xprt *xprt; + struct rpc_rqst *rovr; + struct sk_buff *skb; + int err, repsize, copied; + u32 _xid, *xp; + + read_lock(&sk->sk_callback_lock); + dprintk("RPC: udp_data_ready...\n"); + if (!(xprt = xprt_from_sock(sk))) { + printk("RPC: udp_data_ready request not found!\n"); + goto out; + } + + dprintk("RPC: udp_data_ready client %p\n", xprt); + + if ((skb = skb_recv_datagram(sk, 0, 1, &err)) == NULL) + goto out; + + if (xprt->shutdown) + goto dropit; + + repsize = skb->len - sizeof(struct udphdr); + if (repsize < 4) { + printk("RPC: impossible RPC reply size %d!\n", repsize); + goto dropit; + } + + /* Copy the XID from the skb... */ + xp = skb_header_pointer(skb, sizeof(struct udphdr), + sizeof(_xid), &_xid); + if (xp == NULL) + goto dropit; + + /* Look up and lock the request corresponding to the given XID */ + spin_lock(&xprt->sock_lock); + rovr = xprt_lookup_rqst(xprt, *xp); + if (!rovr) + goto out_unlock; + task = rovr->rq_task; + + dprintk("RPC: %4d received reply\n", task->tk_pid); + + if ((copied = rovr->rq_private_buf.buflen) > repsize) + copied = repsize; + + /* Suck it into the iovec, verify checksum if not done by hw. */ + if (csum_partial_copy_to_xdr(&rovr->rq_private_buf, skb)) + goto out_unlock; + + /* Something worked... */ + dst_confirm(skb->dst); + + xprt_complete_rqst(xprt, rovr, copied); + + out_unlock: + spin_unlock(&xprt->sock_lock); + dropit: + skb_free_datagram(sk, skb); + out: + read_unlock(&sk->sk_callback_lock); +} + +/* + * Copy from an skb into memory and shrink the skb. + */ +static inline size_t +tcp_copy_data(skb_reader_t *desc, void *p, size_t len) +{ + if (len > desc->count) + len = desc->count; + if (skb_copy_bits(desc->skb, desc->offset, p, len)) { + dprintk("RPC: failed to copy %zu bytes from skb. %zu bytes remain\n", + len, desc->count); + return 0; + } + desc->offset += len; + desc->count -= len; + dprintk("RPC: copied %zu bytes from skb. %zu bytes remain\n", + len, desc->count); + return len; +} + +/* + * TCP read fragment marker + */ +static inline void +tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc) +{ + size_t len, used; + char *p; + + p = ((char *) &xprt->tcp_recm) + xprt->tcp_offset; + len = sizeof(xprt->tcp_recm) - xprt->tcp_offset; + used = tcp_copy_data(desc, p, len); + xprt->tcp_offset += used; + if (used != len) + return; + xprt->tcp_reclen = ntohl(xprt->tcp_recm); + if (xprt->tcp_reclen & 0x80000000) + xprt->tcp_flags |= XPRT_LAST_FRAG; + else + xprt->tcp_flags &= ~XPRT_LAST_FRAG; + xprt->tcp_reclen &= 0x7fffffff; + xprt->tcp_flags &= ~XPRT_COPY_RECM; + xprt->tcp_offset = 0; + /* Sanity check of the record length */ + if (xprt->tcp_reclen < 4) { + printk(KERN_ERR "RPC: Invalid TCP record fragment length\n"); + xprt_disconnect(xprt); + } + dprintk("RPC: reading TCP record fragment of length %d\n", + xprt->tcp_reclen); +} + +static void +tcp_check_recm(struct rpc_xprt *xprt) +{ + dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u, tcp_flags = %lx\n", + xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen, xprt->tcp_flags); + if (xprt->tcp_offset == xprt->tcp_reclen) { + xprt->tcp_flags |= XPRT_COPY_RECM; + xprt->tcp_offset = 0; + if (xprt->tcp_flags & XPRT_LAST_FRAG) { + xprt->tcp_flags &= ~XPRT_COPY_DATA; + xprt->tcp_flags |= XPRT_COPY_XID; + xprt->tcp_copied = 0; + } + } +} + +/* + * TCP read xid + */ +static inline void +tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc) +{ + size_t len, used; + char *p; + + len = sizeof(xprt->tcp_xid) - xprt->tcp_offset; + dprintk("RPC: reading XID (%Zu bytes)\n", len); + p = ((char *) &xprt->tcp_xid) + xprt->tcp_offset; + used = tcp_copy_data(desc, p, len); + xprt->tcp_offset += used; + if (used != len) + return; + xprt->tcp_flags &= ~XPRT_COPY_XID; + xprt->tcp_flags |= XPRT_COPY_DATA; + xprt->tcp_copied = 4; + dprintk("RPC: reading reply for XID %08x\n", + ntohl(xprt->tcp_xid)); + tcp_check_recm(xprt); +} + +/* + * TCP read and complete request + */ +static inline void +tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc) +{ + struct rpc_rqst *req; + struct xdr_buf *rcvbuf; + size_t len; + ssize_t r; + + /* Find and lock the request corresponding to this xid */ + spin_lock(&xprt->sock_lock); + req = xprt_lookup_rqst(xprt, xprt->tcp_xid); + if (!req) { + xprt->tcp_flags &= ~XPRT_COPY_DATA; + dprintk("RPC: XID %08x request not found!\n", + ntohl(xprt->tcp_xid)); + spin_unlock(&xprt->sock_lock); + return; + } + + rcvbuf = &req->rq_private_buf; + len = desc->count; + if (len > xprt->tcp_reclen - xprt->tcp_offset) { + skb_reader_t my_desc; + + len = xprt->tcp_reclen - xprt->tcp_offset; + memcpy(&my_desc, desc, sizeof(my_desc)); + my_desc.count = len; + r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied, + &my_desc, tcp_copy_data); + desc->count -= r; + desc->offset += r; + } else + r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied, + desc, tcp_copy_data); + + if (r > 0) { + xprt->tcp_copied += r; + xprt->tcp_offset += r; + } + if (r != len) { + /* Error when copying to the receive buffer, + * usually because we weren't able to allocate + * additional buffer pages. All we can do now + * is turn off XPRT_COPY_DATA, so the request + * will not receive any additional updates, + * and time out. + * Any remaining data from this record will + * be discarded. + */ + xprt->tcp_flags &= ~XPRT_COPY_DATA; + dprintk("RPC: XID %08x truncated request\n", + ntohl(xprt->tcp_xid)); + dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n", + xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen); + goto out; + } + + dprintk("RPC: XID %08x read %Zd bytes\n", + ntohl(xprt->tcp_xid), r); + dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u\n", + xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen); + + if (xprt->tcp_copied == req->rq_private_buf.buflen) + xprt->tcp_flags &= ~XPRT_COPY_DATA; + else if (xprt->tcp_offset == xprt->tcp_reclen) { + if (xprt->tcp_flags & XPRT_LAST_FRAG) + xprt->tcp_flags &= ~XPRT_COPY_DATA; + } + +out: + if (!(xprt->tcp_flags & XPRT_COPY_DATA)) { + dprintk("RPC: %4d received reply complete\n", + req->rq_task->tk_pid); + xprt_complete_rqst(xprt, req, xprt->tcp_copied); + } + spin_unlock(&xprt->sock_lock); + tcp_check_recm(xprt); +} + +/* + * TCP discard extra bytes from a short read + */ +static inline void +tcp_read_discard(struct rpc_xprt *xprt, skb_reader_t *desc) +{ + size_t len; + + len = xprt->tcp_reclen - xprt->tcp_offset; + if (len > desc->count) + len = desc->count; + desc->count -= len; + desc->offset += len; + xprt->tcp_offset += len; + dprintk("RPC: discarded %Zu bytes\n", len); + tcp_check_recm(xprt); +} + +/* + * TCP record receive routine + * We first have to grab the record marker, then the XID, then the data. + */ +static int +tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, + unsigned int offset, size_t len) +{ + struct rpc_xprt *xprt = rd_desc->arg.data; + skb_reader_t desc = { + .skb = skb, + .offset = offset, + .count = len, + .csum = 0 + }; + + dprintk("RPC: tcp_data_recv\n"); + do { + /* Read in a new fragment marker if necessary */ + /* Can we ever really expect to get completely empty fragments? */ + if (xprt->tcp_flags & XPRT_COPY_RECM) { + tcp_read_fraghdr(xprt, &desc); + continue; + } + /* Read in the xid if necessary */ + if (xprt->tcp_flags & XPRT_COPY_XID) { + tcp_read_xid(xprt, &desc); + continue; + } + /* Read in the request data */ + if (xprt->tcp_flags & XPRT_COPY_DATA) { + tcp_read_request(xprt, &desc); + continue; + } + /* Skip over any trailing bytes on short reads */ + tcp_read_discard(xprt, &desc); + } while (desc.count); + dprintk("RPC: tcp_data_recv done\n"); + return len - desc.count; +} + +static void tcp_data_ready(struct sock *sk, int bytes) +{ + struct rpc_xprt *xprt; + read_descriptor_t rd_desc; + + read_lock(&sk->sk_callback_lock); + dprintk("RPC: tcp_data_ready...\n"); + if (!(xprt = xprt_from_sock(sk))) { + printk("RPC: tcp_data_ready socket info not found!\n"); + goto out; + } + if (xprt->shutdown) + goto out; + + /* We use rd_desc to pass struct xprt to tcp_data_recv */ + rd_desc.arg.data = xprt; + rd_desc.count = 65536; + tcp_read_sock(sk, &rd_desc, tcp_data_recv); +out: + read_unlock(&sk->sk_callback_lock); +} + +static void +tcp_state_change(struct sock *sk) +{ + struct rpc_xprt *xprt; + + read_lock(&sk->sk_callback_lock); + if (!(xprt = xprt_from_sock(sk))) + goto out; + dprintk("RPC: tcp_state_change client %p...\n", xprt); + dprintk("RPC: state %x conn %d dead %d zapped %d\n", + sk->sk_state, xprt_connected(xprt), + sock_flag(sk, SOCK_DEAD), + sock_flag(sk, SOCK_ZAPPED)); + + switch (sk->sk_state) { + case TCP_ESTABLISHED: + spin_lock_bh(&xprt->sock_lock); + if (!xprt_test_and_set_connected(xprt)) { + /* Reset TCP record info */ + xprt->tcp_offset = 0; + xprt->tcp_reclen = 0; + xprt->tcp_copied = 0; + xprt->tcp_flags = XPRT_COPY_RECM | XPRT_COPY_XID; + rpc_wake_up(&xprt->pending); + } + spin_unlock_bh(&xprt->sock_lock); + break; + case TCP_SYN_SENT: + case TCP_SYN_RECV: + break; + default: + xprt_disconnect(xprt); + break; + } + out: + read_unlock(&sk->sk_callback_lock); +} + +/* + * Called when more output buffer space is available for this socket. + * We try not to wake our writers until they can make "significant" + * progress, otherwise we'll waste resources thrashing sock_sendmsg + * with a bunch of small requests. + */ +static void +xprt_write_space(struct sock *sk) +{ + struct rpc_xprt *xprt; + struct socket *sock; + + read_lock(&sk->sk_callback_lock); + if (!(xprt = xprt_from_sock(sk)) || !(sock = sk->sk_socket)) + goto out; + if (xprt->shutdown) + goto out; + + /* Wait until we have enough socket memory */ + if (xprt->stream) { + /* from net/core/stream.c:sk_stream_write_space */ + if (sk_stream_wspace(sk) < sk_stream_min_wspace(sk)) + goto out; + } else { + /* from net/core/sock.c:sock_def_write_space */ + if (!sock_writeable(sk)) + goto out; + } + + if (!test_and_clear_bit(SOCK_NOSPACE, &sock->flags)) + goto out; + + spin_lock_bh(&xprt->sock_lock); + if (xprt->snd_task) + rpc_wake_up_task(xprt->snd_task); + spin_unlock_bh(&xprt->sock_lock); +out: + read_unlock(&sk->sk_callback_lock); +} + +/* + * Set socket buffer length + */ +static void +xprt_sock_setbufsize(struct rpc_xprt *xprt) +{ + struct sock *sk = xprt->inet; + + if (xprt->stream) + return; + if (xprt->rcvsize) { + sk->sk_userlocks |= SOCK_RCVBUF_LOCK; + sk->sk_rcvbuf = xprt->rcvsize * xprt->max_reqs * 2; + } + if (xprt->sndsize) { + sk->sk_userlocks |= SOCK_SNDBUF_LOCK; + sk->sk_sndbuf = xprt->sndsize * xprt->max_reqs * 2; + sk->sk_write_space(sk); + } +} + +/* + * Bind to a reserved port + */ +static inline int xprt_bindresvport(struct rpc_xprt *xprt, struct socket *sock) +{ + struct sockaddr_in myaddr = { + .sin_family = AF_INET, + }; + int err, port; + + /* Were we already bound to a given port? Try to reuse it */ + port = xprt->port; + do { + myaddr.sin_port = htons(port); + err = sock->ops->bind(sock, (struct sockaddr *) &myaddr, + sizeof(myaddr)); + if (err == 0) { + xprt->port = port; + return 0; + } + if (--port == 0) + port = XPRT_MAX_RESVPORT; + } while (err == -EADDRINUSE && port != xprt->port); + + printk("RPC: Can't bind to reserved port (%d).\n", -err); + return err; +} + +static void +xprt_bind_socket(struct rpc_xprt *xprt, struct socket *sock) +{ + struct sock *sk = sock->sk; + + if (xprt->inet) + return; + + write_lock_bh(&sk->sk_callback_lock); + sk->sk_user_data = xprt; + xprt->old_data_ready = sk->sk_data_ready; + xprt->old_state_change = sk->sk_state_change; + xprt->old_write_space = sk->sk_write_space; + if (xprt->prot == IPPROTO_UDP) { + sk->sk_data_ready = udp_data_ready; + sk->sk_no_check = UDP_CSUM_NORCV; + xprt_set_connected(xprt); + } else { + tcp_sk(sk)->nonagle = 1; /* disable Nagle's algorithm */ + sk->sk_data_ready = tcp_data_ready; + sk->sk_state_change = tcp_state_change; + xprt_clear_connected(xprt); + } + sk->sk_write_space = xprt_write_space; + + /* Reset to new socket */ + xprt->sock = sock; + xprt->inet = sk; + write_unlock_bh(&sk->sk_callback_lock); + + return; +} + +/* + * Datastream sockets are created here, but xprt_connect will create + * and connect stream sockets. + */ +static struct socket * xprt_create_socket(struct rpc_xprt *xprt, int proto, int resvport) +{ + struct socket *sock; + int type, err; + + dprintk("RPC: xprt_create_socket(%s %d)\n", + (proto == IPPROTO_UDP)? "udp" : "tcp", proto); + + type = (proto == IPPROTO_UDP)? SOCK_DGRAM : SOCK_STREAM; + + if ((err = sock_create_kern(PF_INET, type, proto, &sock)) < 0) { + printk("RPC: can't create socket (%d).\n", -err); + return NULL; + } + + /* If the caller has the capability, bind to a reserved port */ + if (resvport && xprt_bindresvport(xprt, sock) < 0) { + printk("RPC: can't bind to reserved port.\n"); + goto failed; + } + + return sock; + +failed: + sock_release(sock); + return NULL; +} + +static void xprt_socket_connect(void *args) +{ + struct rpc_xprt *xprt = (struct rpc_xprt *)args; + struct socket *sock = xprt->sock; + int status = -EIO; + + if (xprt->shutdown || xprt->addr.sin_port == 0) + goto out; + + /* + * Start by resetting any existing state + */ + xprt_close(xprt); + sock = xprt_create_socket(xprt, xprt->prot, xprt->resvport); + if (sock == NULL) { + /* couldn't create socket or bind to reserved port; + * this is likely a permanent error, so cause an abort */ + goto out; + } + xprt_bind_socket(xprt, sock); + xprt_sock_setbufsize(xprt); + + status = 0; + if (!xprt->stream) + goto out; + + /* + * Tell the socket layer to start connecting... + */ + status = sock->ops->connect(sock, (struct sockaddr *) &xprt->addr, + sizeof(xprt->addr), O_NONBLOCK); + dprintk("RPC: %p connect status %d connected %d sock state %d\n", + xprt, -status, xprt_connected(xprt), sock->sk->sk_state); + if (status < 0) { + switch (status) { + case -EINPROGRESS: + case -EALREADY: + goto out_clear; + } + } +out: + if (status < 0) + rpc_wake_up_status(&xprt->pending, status); + else + rpc_wake_up(&xprt->pending); +out_clear: + smp_mb__before_clear_bit(); + clear_bit(XPRT_CONNECTING, &xprt->sockstate); + smp_mb__after_clear_bit(); +} + +static void +xprt_connect_sock(struct rpc_task *task) +{ + struct rpc_xprt *xprt = task->tk_xprt; + + if (!test_and_set_bit(XPRT_CONNECTING, &xprt->sockstate)) { + /* Note: if we are here due to a dropped connection + * we delay reconnecting by RPC_REESTABLISH_TIMEOUT/HZ + * seconds + */ + if (xprt->sock != NULL) + schedule_delayed_work(&xprt->sock_connect, + RPC_REESTABLISH_TIMEOUT); + else { + schedule_work(&xprt->sock_connect); + /* flush_scheduled_work can sleep... */ + if (!RPC_IS_ASYNC(task)) + flush_scheduled_work(); + } + } +} + +/* + * Set default timeout parameters + */ +static void +xprt_default_timeout(struct rpc_timeout *to, int proto) +{ + if (proto == IPPROTO_UDP) + xprt_set_timeout(to, 5, 5 * HZ); + else + xprt_set_timeout(to, 2, 60 * HZ); +} + +static struct rpc_xprt_ops xprt_socket_ops = { + .set_buffer_size = xprt_sock_setbufsize, + .connect = xprt_connect_sock, + .send_request = xprt_send_request, + .close = xprt_close, + .destroy = xprt_socket_destroy, +}; + +extern unsigned int xprt_udp_slot_table_entries; +extern unsigned int xprt_tcp_slot_table_entries; + +int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) +{ + size_t slot_table_size; + + dprintk("RPC: setting up udp-ipv4 transport...\n"); + + xprt->max_reqs = xprt_udp_slot_table_entries; + slot_table_size = xprt->max_reqs * sizeof(xprt->slot[0]); + xprt->slot = kmalloc(slot_table_size, GFP_KERNEL); + if (xprt->slot == NULL) + return -ENOMEM; + memset(xprt->slot, 0, slot_table_size); + + xprt->prot = IPPROTO_UDP; + xprt->port = XPRT_MAX_RESVPORT; + xprt->stream = 0; + xprt->nocong = 0; + xprt->cwnd = RPC_INITCWND; + xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; + /* XXX: header size can vary due to auth type, IPv6, etc. */ + xprt->max_payload = (1U << 16) - (MAX_HEADER << 3); + + INIT_WORK(&xprt->sock_connect, xprt_socket_connect, xprt); + + xprt->ops = &xprt_socket_ops; + + if (to) + xprt->timeout = *to; + else + xprt_default_timeout(to, xprt->prot); + + return 0; +} + +int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) +{ + size_t slot_table_size; + + dprintk("RPC: setting up tcp-ipv4 transport...\n"); + + xprt->max_reqs = xprt_tcp_slot_table_entries; + slot_table_size = xprt->max_reqs * sizeof(xprt->slot[0]); + xprt->slot = kmalloc(slot_table_size, GFP_KERNEL); + if (xprt->slot == NULL) + return -ENOMEM; + memset(xprt->slot, 0, slot_table_size); + + xprt->prot = IPPROTO_TCP; + xprt->port = XPRT_MAX_RESVPORT; + xprt->stream = 1; + xprt->nocong = 1; + xprt->cwnd = RPC_MAXCWND(xprt); + xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; + xprt->max_payload = (1U << 31) - 1; + + INIT_WORK(&xprt->sock_connect, xprt_socket_connect, xprt); + + xprt->ops = &xprt_socket_ops; + + if (to) + xprt->timeout = *to; + else + xprt_default_timeout(to, xprt->prot); + + return 0; +} -- GitLab From 9903cd1c27a1f30e8efea75e125be3b2002f7cb9 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:26 -0400 Subject: [PATCH 0113/1519] [PATCH] RPC: transport switch function naming Introduce block header comments and a function naming convention to the socket transport implementation. Provide a debug setting for transports that is separate from RPCDBG_XPRT. Eliminate xprt_default_timeout(). Provide block comments for exposed interfaces in xprt.c, and eliminate the useless obvious comments. Convert printk's to dprintk's. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:04:04 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/debug.h | 1 + net/sunrpc/xprt.c | 147 ++++++----- net/sunrpc/xprtsock.c | 464 ++++++++++++++++++----------------- 3 files changed, 311 insertions(+), 301 deletions(-) diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h index eadb31e3c198..42d299747956 100644 --- a/include/linux/sunrpc/debug.h +++ b/include/linux/sunrpc/debug.h @@ -32,6 +32,7 @@ #define RPCDBG_AUTH 0x0010 #define RPCDBG_PMAP 0x0020 #define RPCDBG_SCHED 0x0040 +#define RPCDBG_TRANS 0x0080 #define RPCDBG_SVCSOCK 0x0100 #define RPCDBG_SVCDSP 0x0200 #define RPCDBG_MISC 0x0400 diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 4342acf4d1cd..589195e630ef 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -227,9 +227,6 @@ xprt_adjust_cwnd(struct rpc_xprt *xprt, int result) xprt->cwnd = cwnd; } -/* - * Reset the major timeout value - */ static void xprt_reset_majortimeo(struct rpc_rqst *req) { struct rpc_timeout *to = &req->rq_xprt->timeout; @@ -244,8 +241,10 @@ static void xprt_reset_majortimeo(struct rpc_rqst *req) req->rq_majortimeo += jiffies; } -/* - * Adjust timeout values etc for next retransmit +/** + * xprt_adjust_timeout - adjust timeout values for next retransmit + * @req: RPC request containing parameters to use for the adjustment + * */ int xprt_adjust_timeout(struct rpc_rqst *req) { @@ -291,8 +290,10 @@ xprt_socket_autoclose(void *args) xprt_release_write(xprt, NULL); } -/* - * Mark a transport as disconnected +/** + * xprt_disconnect - mark a transport as disconnected + * @xprt: transport to flag for disconnect + * */ void xprt_disconnect(struct rpc_xprt *xprt) { @@ -303,9 +304,6 @@ void xprt_disconnect(struct rpc_xprt *xprt) spin_unlock_bh(&xprt->sock_lock); } -/* - * Used to allow disconnection when we've been idle - */ static void xprt_init_autodisconnect(unsigned long data) { @@ -327,8 +325,9 @@ xprt_init_autodisconnect(unsigned long data) spin_unlock(&xprt->sock_lock); } -/* - * Attempt to connect a TCP socket. +/** + * xprt_connect - schedule a transport connect operation + * @task: RPC task that is requesting the connect * */ void xprt_connect(struct rpc_task *task) @@ -361,11 +360,7 @@ void xprt_connect(struct rpc_task *task) return; } -/* - * We arrive here when awoken from waiting on connection establishment. - */ -static void -xprt_connect_status(struct rpc_task *task) +static void xprt_connect_status(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; @@ -404,8 +399,11 @@ xprt_connect_status(struct rpc_task *task) } } -/* - * Look up the RPC request corresponding to a reply, and then lock it. +/** + * xprt_lookup_rqst - find an RPC request corresponding to an XID + * @xprt: transport on which the original request was transmitted + * @xid: RPC XID of incoming reply + * */ struct rpc_rqst *xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid) { @@ -422,9 +420,12 @@ struct rpc_rqst *xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid) return req; } -/* - * Complete reply received. - * The TCP code relies on us to remove the request from xprt->pending. +/** + * xprt_complete_rqst - called when reply processing is complete + * @xprt: controlling transport + * @req: RPC request that just completed + * @copied: actual number of bytes received from the transport + * */ void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied) { @@ -498,12 +499,12 @@ xprt_timer(struct rpc_task *task) spin_unlock(&xprt->sock_lock); } -/* - * Place the actual RPC call. - * We have to copy the iovec because sendmsg fiddles with its contents. +/** + * xprt_prepare_transmit - reserve the transport before sending a request + * @task: RPC task about to send a request + * */ -int -xprt_prepare_transmit(struct rpc_task *task) +int xprt_prepare_transmit(struct rpc_task *task) { struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; @@ -533,8 +534,13 @@ xprt_prepare_transmit(struct rpc_task *task) return err; } -void -xprt_transmit(struct rpc_task *task) +/** + * xprt_transmit - send an RPC request on a transport + * @task: controlling RPC task + * + * We have to copy the iovec because sendmsg fiddles with its contents. + */ +void xprt_transmit(struct rpc_task *task) { struct rpc_clnt *clnt = task->tk_client; struct rpc_rqst *req = task->tk_rqstp; @@ -604,11 +610,7 @@ xprt_transmit(struct rpc_task *task) spin_unlock_bh(&xprt->sock_lock); } -/* - * Reserve an RPC call slot. - */ -static inline void -do_xprt_reserve(struct rpc_task *task) +static inline void do_xprt_reserve(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; @@ -628,8 +630,14 @@ do_xprt_reserve(struct rpc_task *task) rpc_sleep_on(&xprt->backlog, task, NULL, NULL); } -void -xprt_reserve(struct rpc_task *task) +/** + * xprt_reserve - allocate an RPC request slot + * @task: RPC task requesting a slot allocation + * + * If no more slots are available, place the task on the transport's + * backlog queue. + */ +void xprt_reserve(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; @@ -641,9 +649,6 @@ xprt_reserve(struct rpc_task *task) } } -/* - * Allocate a 'unique' XID - */ static inline u32 xprt_alloc_xid(struct rpc_xprt *xprt) { return xprt->xid++; @@ -654,11 +659,7 @@ static inline void xprt_init_xid(struct rpc_xprt *xprt) get_random_bytes(&xprt->xid, sizeof(xprt->xid)); } -/* - * Initialize RPC request - */ -static void -xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt) +static void xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt) { struct rpc_rqst *req = task->tk_rqstp; @@ -670,11 +671,12 @@ xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt) req, ntohl(req->rq_xid)); } -/* - * Release an RPC call slot +/** + * xprt_release - release an RPC request slot + * @task: task which is finished with the slot + * */ -void -xprt_release(struct rpc_task *task) +void xprt_release(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; struct rpc_rqst *req; @@ -702,11 +704,14 @@ xprt_release(struct rpc_task *task) spin_unlock(&xprt->xprt_lock); } -/* - * Set constant timeout +/** + * xprt_set_timeout - set constant RPC timeout + * @to: RPC timeout parameters to set up + * @retr: number of retries + * @incr: amount of increase after each retry + * */ -void -xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr) +void xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr) { to->to_initval = to->to_increment = incr; @@ -715,11 +720,7 @@ xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr) to->to_exponential = 0; } -/* - * Initialize an RPC client - */ -static struct rpc_xprt * -xprt_setup(int proto, struct sockaddr_in *ap, struct rpc_timeout *to) +static struct rpc_xprt *xprt_setup(int proto, struct sockaddr_in *ap, struct rpc_timeout *to) { int result; struct rpc_xprt *xprt; @@ -778,11 +779,14 @@ xprt_setup(int proto, struct sockaddr_in *ap, struct rpc_timeout *to) return xprt; } -/* - * Create an RPC client transport given the protocol and peer address. +/** + * xprt_create_proto - create an RPC client transport + * @proto: requested transport protocol + * @sap: remote peer's address + * @to: timeout parameters for new transport + * */ -struct rpc_xprt * -xprt_create_proto(int proto, struct sockaddr_in *sap, struct rpc_timeout *to) +struct rpc_xprt *xprt_create_proto(int proto, struct sockaddr_in *sap, struct rpc_timeout *to) { struct rpc_xprt *xprt; @@ -794,11 +798,7 @@ xprt_create_proto(int proto, struct sockaddr_in *sap, struct rpc_timeout *to) return xprt; } -/* - * Prepare for transport shutdown. - */ -static void -xprt_shutdown(struct rpc_xprt *xprt) +static void xprt_shutdown(struct rpc_xprt *xprt) { xprt->shutdown = 1; rpc_wake_up(&xprt->sending); @@ -809,21 +809,18 @@ xprt_shutdown(struct rpc_xprt *xprt) del_timer_sync(&xprt->timer); } -/* - * Clear the xprt backlog queue - */ -static int -xprt_clear_backlog(struct rpc_xprt *xprt) { +static int xprt_clear_backlog(struct rpc_xprt *xprt) { rpc_wake_up_next(&xprt->backlog); wake_up(&xprt->cong_wait); return 1; } -/* - * Destroy an RPC transport, killing off all requests. +/** + * xprt_destroy - destroy an RPC transport, killing off all requests. + * @xprt: transport to destroy + * */ -int -xprt_destroy(struct rpc_xprt *xprt) +int xprt_destroy(struct rpc_xprt *xprt) { dprintk("RPC: destroying transport %p\n", xprt); xprt_shutdown(xprt); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index fa1180ac4823..80222de3afa4 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -33,23 +33,21 @@ #include #include +/* + * Maximum port number to use when requesting a reserved port. + */ +#define XS_MAX_RESVPORT (800U) + #ifdef RPC_DEBUG # undef RPC_DEBUG_DATA -# define RPCDBG_FACILITY RPCDBG_XPRT +# define RPCDBG_FACILITY RPCDBG_TRANS #endif -#define XPRT_MAX_RESVPORT (800) - #ifdef RPC_DEBUG_DATA -/* - * Print the buffer contents (first 128 bytes only--just enough for - * diropres return). - */ -static void -xprt_pktdump(char *msg, u32 *packet, unsigned int count) +static void xs_pktdump(char *msg, u32 *packet, unsigned int count) { - u8 *buf = (u8 *) packet; - int j; + u8 *buf = (u8 *) packet; + int j; dprintk("RPC: %s\n", msg); for (j = 0; j < count && j < 128; j += 4) { @@ -64,25 +62,22 @@ xprt_pktdump(char *msg, u32 *packet, unsigned int count) dprintk("\n"); } #else -static inline void -xprt_pktdump(char *msg, u32 *packet, unsigned int count) +static inline void xs_pktdump(char *msg, u32 *packet, unsigned int count) { /* NOP */ } #endif -/* - * Look up RPC transport given an INET socket +/** + * xs_sendpages - write pages directly to a socket + * @sock: socket to send on + * @addr: UDP only -- address of destination + * @addrlen: UDP only -- length of destination address + * @xdr: buffer containing this request + * @base: starting position in the buffer + * */ -static inline struct rpc_xprt * -xprt_from_sock(struct sock *sk) -{ - return (struct rpc_xprt *) sk->sk_user_data; -} - -static int -xdr_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, - struct xdr_buf *xdr, unsigned int base, int msgflags) +static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base, int msgflags) { struct page **ppage = xdr->pages; unsigned int len, pglen = xdr->page_len; @@ -125,7 +120,7 @@ xdr_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, } if (base || xdr->page_base) { pglen -= base; - base += xdr->page_base; + base += xdr->page_base; ppage += base >> PAGE_CACHE_SHIFT; base &= ~PAGE_CACHE_MASK; } @@ -176,23 +171,25 @@ xdr_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, return ret; } -/* - * Write data to socket. +/** + * xs_sendmsg - write an RPC request to a socket + * @xprt: generic transport + * @req: the RPC request to write + * */ -static inline int -xprt_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) +static int xs_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) { - struct socket *sock = xprt->sock; - struct xdr_buf *xdr = &req->rq_snd_buf; + struct socket *sock = xprt->sock; + struct xdr_buf *xdr = &req->rq_snd_buf; struct sockaddr *addr = NULL; int addrlen = 0; - unsigned int skip; - int result; + unsigned int skip; + int result; if (!sock) return -ENOTCONN; - xprt_pktdump("packet data:", + xs_pktdump("packet data:", req->rq_svec->iov_base, req->rq_svec->iov_len); @@ -201,13 +198,13 @@ xprt_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) addr = (struct sockaddr *) &xprt->addr; addrlen = sizeof(xprt->addr); } - /* Dont repeat bytes */ + /* Don't repeat bytes */ skip = req->rq_bytes_sent; clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags); - result = xdr_sendpages(sock, addr, addrlen, xdr, skip, MSG_DONTWAIT); + result = xs_sendpages(sock, addr, addrlen, xdr, skip, MSG_DONTWAIT); - dprintk("RPC: xprt_sendmsg(%d) = %d\n", xdr->len - skip, result); + dprintk("RPC: xs_sendmsg(%d) = %d\n", xdr->len - skip, result); if (result >= 0) return result; @@ -215,8 +212,7 @@ xprt_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) switch (result) { case -ECONNREFUSED: /* When the server has died, an ICMP port unreachable message - * prompts ECONNREFUSED. - */ + * prompts ECONNREFUSED. */ case -EAGAIN: break; case -ECONNRESET: @@ -227,13 +223,25 @@ xprt_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) result = -ENOTCONN; break; default: - printk(KERN_NOTICE "RPC: sendmsg returned error %d\n", -result); + break; } return result; } -static int -xprt_send_request(struct rpc_task *task) +/** + * xs_send_request - write an RPC request to a socket + * @task: address of RPC task that manages the state of an RPC request + * + * Return values: + * 0: The request has been sent + * EAGAIN: The socket was blocked, please call again later to + * complete the request + * other: Some other error occured, the request was not sent + * + * XXX: In the case of soft timeouts, should we eventually give up + * if the socket is not able to make progress? + */ +static int xs_send_request(struct rpc_task *task) { struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; @@ -242,18 +250,18 @@ xprt_send_request(struct rpc_task *task) /* set up everything as needed. */ /* Write the record marker */ if (xprt->stream) { - u32 *marker = req->rq_svec[0].iov_base; + u32 *marker = req->rq_svec[0].iov_base; *marker = htonl(0x80000000|(req->rq_slen-sizeof(*marker))); } /* Continue transmitting the packet/record. We must be careful * to cope with writespace callbacks arriving _after_ we have - * called xprt_sendmsg(). + * called sendmsg(). */ while (1) { req->rq_xtime = jiffies; - status = xprt_sendmsg(xprt, req); + status = xs_sendmsg(xprt, req); if (status < 0) break; @@ -285,7 +293,7 @@ xprt_send_request(struct rpc_task *task) if (status == -EAGAIN) { if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) { - /* Protect against races with xprt_write_space */ + /* Protect against races with xs_write_space */ spin_lock_bh(&xprt->sock_lock); /* Don't race with disconnect */ if (!xprt_connected(xprt)) @@ -303,65 +311,77 @@ xprt_send_request(struct rpc_task *task) return status; } -/* - * Close down a transport socket +/** + * xs_close - close a socket + * @xprt: transport + * */ -static void -xprt_close(struct rpc_xprt *xprt) +static void xs_close(struct rpc_xprt *xprt) { - struct socket *sock = xprt->sock; - struct sock *sk = xprt->inet; + struct socket *sock = xprt->sock; + struct sock *sk = xprt->inet; if (!sk) return; + dprintk("RPC: xs_close xprt %p\n", xprt); + write_lock_bh(&sk->sk_callback_lock); xprt->inet = NULL; xprt->sock = NULL; - sk->sk_user_data = NULL; - sk->sk_data_ready = xprt->old_data_ready; + sk->sk_user_data = NULL; + sk->sk_data_ready = xprt->old_data_ready; sk->sk_state_change = xprt->old_state_change; - sk->sk_write_space = xprt->old_write_space; + sk->sk_write_space = xprt->old_write_space; write_unlock_bh(&sk->sk_callback_lock); - sk->sk_no_check = 0; + sk->sk_no_check = 0; sock_release(sock); } -static void xprt_socket_destroy(struct rpc_xprt *xprt) +/** + * xs_destroy - prepare to shutdown a transport + * @xprt: doomed transport + * + */ +static void xs_destroy(struct rpc_xprt *xprt) { + dprintk("RPC: xs_destroy xprt %p\n", xprt); + cancel_delayed_work(&xprt->sock_connect); flush_scheduled_work(); xprt_disconnect(xprt); - xprt_close(xprt); + xs_close(xprt); kfree(xprt->slot); } -/* - * Input handler for RPC replies. Called from a bottom half and hence - * atomic. +static inline struct rpc_xprt *xprt_from_sock(struct sock *sk) +{ + return (struct rpc_xprt *) sk->sk_user_data; +} + +/** + * xs_udp_data_ready - "data ready" callback for UDP sockets + * @sk: socket with data to read + * @len: how much data to read + * */ -static void -udp_data_ready(struct sock *sk, int len) +static void xs_udp_data_ready(struct sock *sk, int len) { - struct rpc_task *task; - struct rpc_xprt *xprt; + struct rpc_task *task; + struct rpc_xprt *xprt; struct rpc_rqst *rovr; - struct sk_buff *skb; + struct sk_buff *skb; int err, repsize, copied; u32 _xid, *xp; read_lock(&sk->sk_callback_lock); - dprintk("RPC: udp_data_ready...\n"); - if (!(xprt = xprt_from_sock(sk))) { - printk("RPC: udp_data_ready request not found!\n"); + dprintk("RPC: xs_udp_data_ready...\n"); + if (!(xprt = xprt_from_sock(sk))) goto out; - } - - dprintk("RPC: udp_data_ready client %p\n", xprt); if ((skb = skb_recv_datagram(sk, 0, 1, &err)) == NULL) goto out; @@ -371,7 +391,7 @@ udp_data_ready(struct sock *sk, int len) repsize = skb->len - sizeof(struct udphdr); if (repsize < 4) { - printk("RPC: impossible RPC reply size %d!\n", repsize); + dprintk("RPC: impossible RPC reply size %d!\n", repsize); goto dropit; } @@ -410,11 +430,7 @@ udp_data_ready(struct sock *sk, int len) read_unlock(&sk->sk_callback_lock); } -/* - * Copy from an skb into memory and shrink the skb. - */ -static inline size_t -tcp_copy_data(skb_reader_t *desc, void *p, size_t len) +static inline size_t xs_tcp_copy_data(skb_reader_t *desc, void *p, size_t len) { if (len > desc->count) len = desc->count; @@ -430,18 +446,14 @@ tcp_copy_data(skb_reader_t *desc, void *p, size_t len) return len; } -/* - * TCP read fragment marker - */ -static inline void -tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc) +static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc) { size_t len, used; char *p; p = ((char *) &xprt->tcp_recm) + xprt->tcp_offset; len = sizeof(xprt->tcp_recm) - xprt->tcp_offset; - used = tcp_copy_data(desc, p, len); + used = xs_tcp_copy_data(desc, p, len); xprt->tcp_offset += used; if (used != len) return; @@ -455,15 +467,15 @@ tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc) xprt->tcp_offset = 0; /* Sanity check of the record length */ if (xprt->tcp_reclen < 4) { - printk(KERN_ERR "RPC: Invalid TCP record fragment length\n"); + dprintk("RPC: invalid TCP record fragment length\n"); xprt_disconnect(xprt); + return; } dprintk("RPC: reading TCP record fragment of length %d\n", xprt->tcp_reclen); } -static void -tcp_check_recm(struct rpc_xprt *xprt) +static void xs_tcp_check_recm(struct rpc_xprt *xprt) { dprintk("RPC: xprt = %p, tcp_copied = %lu, tcp_offset = %u, tcp_reclen = %u, tcp_flags = %lx\n", xprt, xprt->tcp_copied, xprt->tcp_offset, xprt->tcp_reclen, xprt->tcp_flags); @@ -478,11 +490,7 @@ tcp_check_recm(struct rpc_xprt *xprt) } } -/* - * TCP read xid - */ -static inline void -tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc) +static inline void xs_tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc) { size_t len, used; char *p; @@ -490,7 +498,7 @@ tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc) len = sizeof(xprt->tcp_xid) - xprt->tcp_offset; dprintk("RPC: reading XID (%Zu bytes)\n", len); p = ((char *) &xprt->tcp_xid) + xprt->tcp_offset; - used = tcp_copy_data(desc, p, len); + used = xs_tcp_copy_data(desc, p, len); xprt->tcp_offset += used; if (used != len) return; @@ -499,14 +507,10 @@ tcp_read_xid(struct rpc_xprt *xprt, skb_reader_t *desc) xprt->tcp_copied = 4; dprintk("RPC: reading reply for XID %08x\n", ntohl(xprt->tcp_xid)); - tcp_check_recm(xprt); + xs_tcp_check_recm(xprt); } -/* - * TCP read and complete request - */ -static inline void -tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc) +static inline void xs_tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc) { struct rpc_rqst *req; struct xdr_buf *rcvbuf; @@ -533,12 +537,12 @@ tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc) memcpy(&my_desc, desc, sizeof(my_desc)); my_desc.count = len; r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied, - &my_desc, tcp_copy_data); + &my_desc, xs_tcp_copy_data); desc->count -= r; desc->offset += r; } else r = xdr_partial_copy_from_skb(rcvbuf, xprt->tcp_copied, - desc, tcp_copy_data); + desc, xs_tcp_copy_data); if (r > 0) { xprt->tcp_copied += r; @@ -581,14 +585,10 @@ tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc) xprt_complete_rqst(xprt, req, xprt->tcp_copied); } spin_unlock(&xprt->sock_lock); - tcp_check_recm(xprt); + xs_tcp_check_recm(xprt); } -/* - * TCP discard extra bytes from a short read - */ -static inline void -tcp_read_discard(struct rpc_xprt *xprt, skb_reader_t *desc) +static inline void xs_tcp_read_discard(struct rpc_xprt *xprt, skb_reader_t *desc) { size_t len; @@ -599,16 +599,10 @@ tcp_read_discard(struct rpc_xprt *xprt, skb_reader_t *desc) desc->offset += len; xprt->tcp_offset += len; dprintk("RPC: discarded %Zu bytes\n", len); - tcp_check_recm(xprt); + xs_tcp_check_recm(xprt); } -/* - * TCP record receive routine - * We first have to grab the record marker, then the XID, then the data. - */ -static int -tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, - unsigned int offset, size_t len) +static int xs_tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, unsigned int offset, size_t len) { struct rpc_xprt *xprt = rd_desc->arg.data; skb_reader_t desc = { @@ -616,64 +610,72 @@ tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, .offset = offset, .count = len, .csum = 0 - }; + }; - dprintk("RPC: tcp_data_recv\n"); + dprintk("RPC: xs_tcp_data_recv started\n"); do { /* Read in a new fragment marker if necessary */ /* Can we ever really expect to get completely empty fragments? */ if (xprt->tcp_flags & XPRT_COPY_RECM) { - tcp_read_fraghdr(xprt, &desc); + xs_tcp_read_fraghdr(xprt, &desc); continue; } /* Read in the xid if necessary */ if (xprt->tcp_flags & XPRT_COPY_XID) { - tcp_read_xid(xprt, &desc); + xs_tcp_read_xid(xprt, &desc); continue; } /* Read in the request data */ if (xprt->tcp_flags & XPRT_COPY_DATA) { - tcp_read_request(xprt, &desc); + xs_tcp_read_request(xprt, &desc); continue; } /* Skip over any trailing bytes on short reads */ - tcp_read_discard(xprt, &desc); + xs_tcp_read_discard(xprt, &desc); } while (desc.count); - dprintk("RPC: tcp_data_recv done\n"); + dprintk("RPC: xs_tcp_data_recv done\n"); return len - desc.count; } -static void tcp_data_ready(struct sock *sk, int bytes) +/** + * xs_tcp_data_ready - "data ready" callback for TCP sockets + * @sk: socket with data to read + * @bytes: how much data to read + * + */ +static void xs_tcp_data_ready(struct sock *sk, int bytes) { struct rpc_xprt *xprt; read_descriptor_t rd_desc; read_lock(&sk->sk_callback_lock); - dprintk("RPC: tcp_data_ready...\n"); - if (!(xprt = xprt_from_sock(sk))) { - printk("RPC: tcp_data_ready socket info not found!\n"); + dprintk("RPC: xs_tcp_data_ready...\n"); + if (!(xprt = xprt_from_sock(sk))) goto out; - } if (xprt->shutdown) goto out; - /* We use rd_desc to pass struct xprt to tcp_data_recv */ + /* We use rd_desc to pass struct xprt to xs_tcp_data_recv */ rd_desc.arg.data = xprt; rd_desc.count = 65536; - tcp_read_sock(sk, &rd_desc, tcp_data_recv); + tcp_read_sock(sk, &rd_desc, xs_tcp_data_recv); out: read_unlock(&sk->sk_callback_lock); } -static void -tcp_state_change(struct sock *sk) +/** + * xs_tcp_state_change - callback to handle TCP socket state changes + * @sk: socket whose state has changed + * + */ +static void xs_tcp_state_change(struct sock *sk) { - struct rpc_xprt *xprt; + struct rpc_xprt *xprt; read_lock(&sk->sk_callback_lock); if (!(xprt = xprt_from_sock(sk))) goto out; - dprintk("RPC: tcp_state_change client %p...\n", xprt); + dprintk("RPC: xs_tcp_state_change client %p...\n", xprt); dprintk("RPC: state %x conn %d dead %d zapped %d\n", sk->sk_state, xprt_connected(xprt), sock_flag(sk, SOCK_DEAD), @@ -703,17 +705,20 @@ tcp_state_change(struct sock *sk) read_unlock(&sk->sk_callback_lock); } -/* +/** + * xs_write_space - callback invoked when socket buffer space becomes + * available + * @sk: socket whose state has changed + * * Called when more output buffer space is available for this socket. * We try not to wake our writers until they can make "significant" * progress, otherwise we'll waste resources thrashing sock_sendmsg * with a bunch of small requests. */ -static void -xprt_write_space(struct sock *sk) +static void xs_write_space(struct sock *sk) { - struct rpc_xprt *xprt; - struct socket *sock; + struct rpc_xprt *xprt; + struct socket *sock; read_lock(&sk->sk_callback_lock); if (!(xprt = xprt_from_sock(sk)) || !(sock = sk->sk_socket)) @@ -743,11 +748,15 @@ xprt_write_space(struct sock *sk) read_unlock(&sk->sk_callback_lock); } -/* - * Set socket buffer length +/** + * xs_set_buffer_size - set send and receive limits + * @xprt: generic transport + * + * Set socket send and receive limits based on the + * sndsize and rcvsize fields in the generic transport + * structure. This applies only to UDP sockets. */ -static void -xprt_sock_setbufsize(struct rpc_xprt *xprt) +static void xs_set_buffer_size(struct rpc_xprt *xprt) { struct sock *sk = xprt->inet; @@ -764,15 +773,12 @@ xprt_sock_setbufsize(struct rpc_xprt *xprt) } } -/* - * Bind to a reserved port - */ -static inline int xprt_bindresvport(struct rpc_xprt *xprt, struct socket *sock) +static int xs_bindresvport(struct rpc_xprt *xprt, struct socket *sock) { struct sockaddr_in myaddr = { .sin_family = AF_INET, }; - int err, port; + int err, port; /* Were we already bound to a given port? Try to reuse it */ port = xprt->port; @@ -782,20 +788,47 @@ static inline int xprt_bindresvport(struct rpc_xprt *xprt, struct socket *sock) sizeof(myaddr)); if (err == 0) { xprt->port = port; + dprintk("RPC: xs_bindresvport bound to port %u\n", + port); return 0; } if (--port == 0) - port = XPRT_MAX_RESVPORT; + port = XS_MAX_RESVPORT; } while (err == -EADDRINUSE && port != xprt->port); - printk("RPC: Can't bind to reserved port (%d).\n", -err); + dprintk("RPC: can't bind to reserved port (%d).\n", -err); return err; } -static void -xprt_bind_socket(struct rpc_xprt *xprt, struct socket *sock) +static struct socket *xs_create(struct rpc_xprt *xprt, int proto, int resvport) { - struct sock *sk = sock->sk; + struct socket *sock; + int type, err; + + dprintk("RPC: xs_create(%s %d)\n", + (proto == IPPROTO_UDP)? "udp" : "tcp", proto); + + type = (proto == IPPROTO_UDP)? SOCK_DGRAM : SOCK_STREAM; + + if ((err = sock_create_kern(PF_INET, type, proto, &sock)) < 0) { + dprintk("RPC: can't create socket (%d).\n", -err); + return NULL; + } + + /* If the caller has the capability, bind to a reserved port */ + if (resvport && xs_bindresvport(xprt, sock) < 0) + goto failed; + + return sock; + +failed: + sock_release(sock); + return NULL; +} + +static void xs_bind(struct rpc_xprt *xprt, struct socket *sock) +{ + struct sock *sk = sock->sk; if (xprt->inet) return; @@ -806,16 +839,16 @@ xprt_bind_socket(struct rpc_xprt *xprt, struct socket *sock) xprt->old_state_change = sk->sk_state_change; xprt->old_write_space = sk->sk_write_space; if (xprt->prot == IPPROTO_UDP) { - sk->sk_data_ready = udp_data_ready; + sk->sk_data_ready = xs_udp_data_ready; sk->sk_no_check = UDP_CSUM_NORCV; xprt_set_connected(xprt); } else { tcp_sk(sk)->nonagle = 1; /* disable Nagle's algorithm */ - sk->sk_data_ready = tcp_data_ready; - sk->sk_state_change = tcp_state_change; + sk->sk_data_ready = xs_tcp_data_ready; + sk->sk_state_change = xs_tcp_state_change; xprt_clear_connected(xprt); } - sk->sk_write_space = xprt_write_space; + sk->sk_write_space = xs_write_space; /* Reset to new socket */ xprt->sock = sock; @@ -825,39 +858,13 @@ xprt_bind_socket(struct rpc_xprt *xprt, struct socket *sock) return; } -/* - * Datastream sockets are created here, but xprt_connect will create - * and connect stream sockets. +/** + * xs_connect_worker - try to connect a socket to a remote endpoint + * @args: RPC transport to connect + * + * Invoked by a work queue tasklet. */ -static struct socket * xprt_create_socket(struct rpc_xprt *xprt, int proto, int resvport) -{ - struct socket *sock; - int type, err; - - dprintk("RPC: xprt_create_socket(%s %d)\n", - (proto == IPPROTO_UDP)? "udp" : "tcp", proto); - - type = (proto == IPPROTO_UDP)? SOCK_DGRAM : SOCK_STREAM; - - if ((err = sock_create_kern(PF_INET, type, proto, &sock)) < 0) { - printk("RPC: can't create socket (%d).\n", -err); - return NULL; - } - - /* If the caller has the capability, bind to a reserved port */ - if (resvport && xprt_bindresvport(xprt, sock) < 0) { - printk("RPC: can't bind to reserved port.\n"); - goto failed; - } - - return sock; - -failed: - sock_release(sock); - return NULL; -} - -static void xprt_socket_connect(void *args) +static void xs_connect_worker(void *args) { struct rpc_xprt *xprt = (struct rpc_xprt *)args; struct socket *sock = xprt->sock; @@ -866,18 +873,20 @@ static void xprt_socket_connect(void *args) if (xprt->shutdown || xprt->addr.sin_port == 0) goto out; + dprintk("RPC: xs_connect_worker xprt %p\n", xprt); + /* * Start by resetting any existing state */ - xprt_close(xprt); - sock = xprt_create_socket(xprt, xprt->prot, xprt->resvport); + xs_close(xprt); + sock = xs_create(xprt, xprt->prot, xprt->resvport); if (sock == NULL) { /* couldn't create socket or bind to reserved port; * this is likely a permanent error, so cause an abort */ goto out; } - xprt_bind_socket(xprt, sock); - xprt_sock_setbufsize(xprt); + xs_bind(xprt, sock); + xs_set_buffer_size(xprt); status = 0; if (!xprt->stream) @@ -908,20 +917,23 @@ static void xprt_socket_connect(void *args) smp_mb__after_clear_bit(); } -static void -xprt_connect_sock(struct rpc_task *task) +/** + * xs_connect - connect a socket to a remote endpoint + * @task: address of RPC task that manages state of connect request + * + * TCP: If the remote end dropped the connection, delay reconnecting. + */ +static void xs_connect(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; if (!test_and_set_bit(XPRT_CONNECTING, &xprt->sockstate)) { - /* Note: if we are here due to a dropped connection - * we delay reconnecting by RPC_REESTABLISH_TIMEOUT/HZ - * seconds - */ - if (xprt->sock != NULL) + if (xprt->sock != NULL) { + dprintk("RPC: xs_connect delayed xprt %p\n", xprt); schedule_delayed_work(&xprt->sock_connect, RPC_REESTABLISH_TIMEOUT); - else { + } else { + dprintk("RPC: xs_connect scheduled xprt %p\n", xprt); schedule_work(&xprt->sock_connect); /* flush_scheduled_work can sleep... */ if (!RPC_IS_ASYNC(task)) @@ -930,29 +942,23 @@ xprt_connect_sock(struct rpc_task *task) } } -/* - * Set default timeout parameters - */ -static void -xprt_default_timeout(struct rpc_timeout *to, int proto) -{ - if (proto == IPPROTO_UDP) - xprt_set_timeout(to, 5, 5 * HZ); - else - xprt_set_timeout(to, 2, 60 * HZ); -} - -static struct rpc_xprt_ops xprt_socket_ops = { - .set_buffer_size = xprt_sock_setbufsize, - .connect = xprt_connect_sock, - .send_request = xprt_send_request, - .close = xprt_close, - .destroy = xprt_socket_destroy, +static struct rpc_xprt_ops xs_ops = { + .set_buffer_size = xs_set_buffer_size, + .connect = xs_connect, + .send_request = xs_send_request, + .close = xs_close, + .destroy = xs_destroy, }; extern unsigned int xprt_udp_slot_table_entries; extern unsigned int xprt_tcp_slot_table_entries; +/** + * xs_setup_udp - Set up transport to use a UDP socket + * @xprt: transport to set up + * @to: timeout parameters + * + */ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) { size_t slot_table_size; @@ -967,7 +973,7 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) memset(xprt->slot, 0, slot_table_size); xprt->prot = IPPROTO_UDP; - xprt->port = XPRT_MAX_RESVPORT; + xprt->port = XS_MAX_RESVPORT; xprt->stream = 0; xprt->nocong = 0; xprt->cwnd = RPC_INITCWND; @@ -975,18 +981,24 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) /* XXX: header size can vary due to auth type, IPv6, etc. */ xprt->max_payload = (1U << 16) - (MAX_HEADER << 3); - INIT_WORK(&xprt->sock_connect, xprt_socket_connect, xprt); + INIT_WORK(&xprt->sock_connect, xs_connect_worker, xprt); - xprt->ops = &xprt_socket_ops; + xprt->ops = &xs_ops; if (to) xprt->timeout = *to; else - xprt_default_timeout(to, xprt->prot); + xprt_set_timeout(&xprt->timeout, 5, 5 * HZ); return 0; } +/** + * xs_setup_tcp - Set up transport to use a TCP socket + * @xprt: transport to set up + * @to: timeout parameters + * + */ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) { size_t slot_table_size; @@ -1001,21 +1013,21 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) memset(xprt->slot, 0, slot_table_size); xprt->prot = IPPROTO_TCP; - xprt->port = XPRT_MAX_RESVPORT; + xprt->port = XS_MAX_RESVPORT; xprt->stream = 1; xprt->nocong = 1; xprt->cwnd = RPC_MAXCWND(xprt); xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; xprt->max_payload = (1U << 31) - 1; - INIT_WORK(&xprt->sock_connect, xprt_socket_connect, xprt); + INIT_WORK(&xprt->sock_connect, xs_connect_worker, xprt); - xprt->ops = &xprt_socket_ops; + xprt->ops = &xs_ops; if (to) xprt->timeout = *to; else - xprt_default_timeout(to, xprt->prot); + xprt_set_timeout(&xprt->timeout, 2, 60 * HZ); return 0; } -- GitLab From b4b5cc85ed4ecbe4adbfbc4df028850de67a9f09 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:29 -0400 Subject: [PATCH 0114/1519] [PATCH] RPC: Reduce stack utilization in xs_sendpages Reduce stack utilization of the RPC socket transport's send path. A couple of unlikely()s are added to ensure the compiler places the tail processing at the end of the csect. Test-plan: Millions of fsx operations. Performance characterization such as "sio" or "iozone". Version: Thu, 11 Aug 2005 16:04:30 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/xprtsock.c | 73 +++++++++++++++++++++++++------------------ 1 file changed, 43 insertions(+), 30 deletions(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 80222de3afa4..a5a04203a6b0 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -68,6 +68,41 @@ static inline void xs_pktdump(char *msg, u32 *packet, unsigned int count) } #endif +#define XS_SENDMSG_FLAGS (MSG_DONTWAIT | MSG_NOSIGNAL) + +static inline int xs_send_head(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base, unsigned int len) +{ + struct kvec iov = { + .iov_base = xdr->head[0].iov_base + base, + .iov_len = len - base, + }; + struct msghdr msg = { + .msg_name = addr, + .msg_namelen = addrlen, + .msg_flags = XS_SENDMSG_FLAGS, + }; + + if (xdr->len > len) + msg.msg_flags |= MSG_MORE; + + if (likely(iov.iov_len)) + return kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); + return kernel_sendmsg(sock, &msg, NULL, 0, 0); +} + +static int xs_send_tail(struct socket *sock, struct xdr_buf *xdr, unsigned int base, unsigned int len) +{ + struct kvec iov = { + .iov_base = xdr->tail[0].iov_base + base, + .iov_len = len - base, + }; + struct msghdr msg = { + .msg_flags = XS_SENDMSG_FLAGS, + }; + + return kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); +} + /** * xs_sendpages - write pages directly to a socket * @sock: socket to send on @@ -77,7 +112,7 @@ static inline void xs_pktdump(char *msg, u32 *packet, unsigned int count) * @base: starting position in the buffer * */ -static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base, int msgflags) +static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base) { struct page **ppage = xdr->pages; unsigned int len, pglen = xdr->page_len; @@ -86,35 +121,20 @@ static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, len = xdr->head[0].iov_len; if (base < len || (addr != NULL && base == 0)) { - struct kvec iov = { - .iov_base = xdr->head[0].iov_base + base, - .iov_len = len - base, - }; - struct msghdr msg = { - .msg_name = addr, - .msg_namelen = addrlen, - .msg_flags = msgflags, - }; - if (xdr->len > len) - msg.msg_flags |= MSG_MORE; - - if (iov.iov_len != 0) - err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); - else - err = kernel_sendmsg(sock, &msg, NULL, 0, 0); + err = xs_send_head(sock, addr, addrlen, xdr, base, len); if (ret == 0) ret = err; else if (err > 0) ret += err; - if (err != iov.iov_len) + if (err != (len - base)) goto out; base = 0; } else base -= len; - if (pglen == 0) + if (unlikely(pglen == 0)) goto copy_tail; - if (base >= pglen) { + if (unlikely(base >= pglen)) { base -= pglen; goto copy_tail; } @@ -127,7 +147,7 @@ static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, sendpage = sock->ops->sendpage ? : sock_no_sendpage; do { - int flags = msgflags; + int flags = XS_SENDMSG_FLAGS; len = PAGE_CACHE_SIZE; if (base) @@ -154,14 +174,7 @@ static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, copy_tail: len = xdr->tail[0].iov_len; if (base < len) { - struct kvec iov = { - .iov_base = xdr->tail[0].iov_base + base, - .iov_len = len - base, - }; - struct msghdr msg = { - .msg_flags = msgflags, - }; - err = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); + err = xs_send_tail(sock, xdr, base, len); if (ret == 0) ret = err; else if (err > 0) @@ -202,7 +215,7 @@ static int xs_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) skip = req->rq_bytes_sent; clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags); - result = xs_sendpages(sock, addr, addrlen, xdr, skip, MSG_DONTWAIT); + result = xs_sendpages(sock, addr, addrlen, xdr, skip); dprintk("RPC: xs_sendmsg(%d) = %d\n", xdr->len - skip, result); -- GitLab From 4a0f8c04f2ece949d54a0c4fd7490259cf23a58a Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:32 -0400 Subject: [PATCH 0115/1519] [PATCH] RPC: Rename sock_lock Clean-up: replace a name reference to sockets in the generic parts of the RPC client by renaming sock_lock in the rpc_xprt structure. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:00 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 2 +- net/sunrpc/xprt.c | 44 ++++++++++++++++++------------------- net/sunrpc/xprtsock.c | 22 +++++++++---------- 3 files changed, 34 insertions(+), 34 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index d82b47ab73cb..c4f903f0e17c 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -198,7 +198,7 @@ struct rpc_xprt { /* * Send stuff */ - spinlock_t sock_lock; /* lock socket info */ + spinlock_t transport_lock; /* lock transport info */ spinlock_t xprt_lock; /* lock xprt info */ struct rpc_task * snd_task; /* Task blocked in send */ diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 589195e630ef..1f0da8c1a3b0 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -106,9 +106,9 @@ xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) { int retval; - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); retval = __xprt_lock_write(xprt, task); - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); return retval; } @@ -161,9 +161,9 @@ __xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) static inline void xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) { - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); __xprt_release_write(xprt, task); - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); } /* @@ -266,9 +266,9 @@ int xprt_adjust_timeout(struct rpc_rqst *req) req->rq_retries = 0; xprt_reset_majortimeo(req); /* Reset the RTT counters == "slow start" */ - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); rpc_init_rtt(req->rq_task->tk_client->cl_rtt, to->to_initval); - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); pprintk("RPC: %lu timeout\n", jiffies); status = -ETIMEDOUT; } @@ -298,10 +298,10 @@ xprt_socket_autoclose(void *args) void xprt_disconnect(struct rpc_xprt *xprt) { dprintk("RPC: disconnected transport %p\n", xprt); - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); xprt_clear_connected(xprt); rpc_wake_up_status(&xprt->pending, -ENOTCONN); - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); } static void @@ -309,12 +309,12 @@ xprt_init_autodisconnect(unsigned long data) { struct rpc_xprt *xprt = (struct rpc_xprt *)data; - spin_lock(&xprt->sock_lock); + spin_lock(&xprt->transport_lock); if (!list_empty(&xprt->recv) || xprt->shutdown) goto out_abort; if (test_and_set_bit(XPRT_LOCKED, &xprt->sockstate)) goto out_abort; - spin_unlock(&xprt->sock_lock); + spin_unlock(&xprt->transport_lock); /* Let keventd close the socket */ if (test_bit(XPRT_CONNECTING, &xprt->sockstate) != 0) xprt_release_write(xprt, NULL); @@ -322,7 +322,7 @@ xprt_init_autodisconnect(unsigned long data) schedule_work(&xprt->task_cleanup); return; out_abort: - spin_unlock(&xprt->sock_lock); + spin_unlock(&xprt->transport_lock); } /** @@ -482,7 +482,7 @@ xprt_timer(struct rpc_task *task) struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; - spin_lock(&xprt->sock_lock); + spin_lock(&xprt->transport_lock); if (req->rq_received) goto out; @@ -496,7 +496,7 @@ xprt_timer(struct rpc_task *task) out: task->tk_timeout = 0; rpc_wake_up_task(task); - spin_unlock(&xprt->sock_lock); + spin_unlock(&xprt->transport_lock); } /** @@ -515,7 +515,7 @@ int xprt_prepare_transmit(struct rpc_task *task) if (xprt->shutdown) return -EIO; - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); if (req->rq_received && !req->rq_bytes_sent) { err = req->rq_received; goto out_unlock; @@ -530,7 +530,7 @@ int xprt_prepare_transmit(struct rpc_task *task) goto out_unlock; } out_unlock: - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); return err; } @@ -552,13 +552,13 @@ void xprt_transmit(struct rpc_task *task) smp_rmb(); if (!req->rq_received) { if (list_empty(&req->rq_list)) { - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); /* Update the softirq receive buffer */ memcpy(&req->rq_private_buf, &req->rq_rcv_buf, sizeof(req->rq_private_buf)); /* Add request to the receive list */ list_add_tail(&req->rq_list, &xprt->recv); - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); xprt_reset_majortimeo(req); /* Turn off autodisconnect */ del_singleshot_timer_sync(&xprt->timer); @@ -592,7 +592,7 @@ void xprt_transmit(struct rpc_task *task) out_receive: dprintk("RPC: %4d xmit complete\n", task->tk_pid); /* Set the task's receive timeout value */ - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); if (!xprt->nocong) { int timer = task->tk_msg.rpc_proc->p_timer; task->tk_timeout = rpc_calc_rto(clnt->cl_rtt, timer); @@ -607,7 +607,7 @@ void xprt_transmit(struct rpc_task *task) else if (!req->rq_received) rpc_sleep_on(&xprt->pending, task, NULL, xprt_timer); __xprt_release_write(xprt, task); - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); } static inline void do_xprt_reserve(struct rpc_task *task) @@ -683,7 +683,7 @@ void xprt_release(struct rpc_task *task) if (!(req = task->tk_rqstp)) return; - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); __xprt_release_write(xprt, task); __xprt_put_cong(xprt, req); if (!list_empty(&req->rq_list)) @@ -692,7 +692,7 @@ void xprt_release(struct rpc_task *task) if (list_empty(&xprt->recv) && !xprt->shutdown) mod_timer(&xprt->timer, xprt->last_used + RPC_IDLE_DISCONNECT_TIMEOUT); - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); task->tk_rqstp = NULL; memset(req, 0, sizeof(*req)); /* mark unused */ @@ -750,7 +750,7 @@ static struct rpc_xprt *xprt_setup(int proto, struct sockaddr_in *ap, struct rpc return ERR_PTR(result); } - spin_lock_init(&xprt->sock_lock); + spin_lock_init(&xprt->transport_lock); spin_lock_init(&xprt->xprt_lock); init_waitqueue_head(&xprt->cong_wait); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index a5a04203a6b0..bc90caab6088 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -307,7 +307,7 @@ static int xs_send_request(struct rpc_task *task) if (status == -EAGAIN) { if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) { /* Protect against races with xs_write_space */ - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); /* Don't race with disconnect */ if (!xprt_connected(xprt)) task->tk_status = -ENOTCONN; @@ -315,7 +315,7 @@ static int xs_send_request(struct rpc_task *task) task->tk_timeout = req->rq_timeout; rpc_sleep_on(&xprt->pending, task, NULL, NULL); } - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); return status; } /* Keep holding the socket if it is blocked */ @@ -415,7 +415,7 @@ static void xs_udp_data_ready(struct sock *sk, int len) goto dropit; /* Look up and lock the request corresponding to the given XID */ - spin_lock(&xprt->sock_lock); + spin_lock(&xprt->transport_lock); rovr = xprt_lookup_rqst(xprt, *xp); if (!rovr) goto out_unlock; @@ -436,7 +436,7 @@ static void xs_udp_data_ready(struct sock *sk, int len) xprt_complete_rqst(xprt, rovr, copied); out_unlock: - spin_unlock(&xprt->sock_lock); + spin_unlock(&xprt->transport_lock); dropit: skb_free_datagram(sk, skb); out: @@ -531,13 +531,13 @@ static inline void xs_tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc ssize_t r; /* Find and lock the request corresponding to this xid */ - spin_lock(&xprt->sock_lock); + spin_lock(&xprt->transport_lock); req = xprt_lookup_rqst(xprt, xprt->tcp_xid); if (!req) { xprt->tcp_flags &= ~XPRT_COPY_DATA; dprintk("RPC: XID %08x request not found!\n", ntohl(xprt->tcp_xid)); - spin_unlock(&xprt->sock_lock); + spin_unlock(&xprt->transport_lock); return; } @@ -597,7 +597,7 @@ static inline void xs_tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc req->rq_task->tk_pid); xprt_complete_rqst(xprt, req, xprt->tcp_copied); } - spin_unlock(&xprt->sock_lock); + spin_unlock(&xprt->transport_lock); xs_tcp_check_recm(xprt); } @@ -696,7 +696,7 @@ static void xs_tcp_state_change(struct sock *sk) switch (sk->sk_state) { case TCP_ESTABLISHED: - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); if (!xprt_test_and_set_connected(xprt)) { /* Reset TCP record info */ xprt->tcp_offset = 0; @@ -705,7 +705,7 @@ static void xs_tcp_state_change(struct sock *sk) xprt->tcp_flags = XPRT_COPY_RECM | XPRT_COPY_XID; rpc_wake_up(&xprt->pending); } - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); break; case TCP_SYN_SENT: case TCP_SYN_RECV: @@ -753,10 +753,10 @@ static void xs_write_space(struct sock *sk) if (!test_and_clear_bit(SOCK_NOSPACE, &sock->flags)) goto out; - spin_lock_bh(&xprt->sock_lock); + spin_lock_bh(&xprt->transport_lock); if (xprt->snd_task) rpc_wake_up_task(xprt->snd_task); - spin_unlock_bh(&xprt->sock_lock); + spin_unlock_bh(&xprt->transport_lock); out: read_unlock(&sk->sk_callback_lock); } -- GitLab From 5dc07727f86b25851e95193a0c484ea21b531c47 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:35 -0400 Subject: [PATCH 0116/1519] [PATCH] RPC: Rename xprt_lock Clean-up: Replace the xprt_lock with something more aptly named. This lock single-threads the XID and request slot reservation process. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:26 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 2 +- net/sunrpc/xprt.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index c4f903f0e17c..41ce296dded1 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -199,7 +199,7 @@ struct rpc_xprt { * Send stuff */ spinlock_t transport_lock; /* lock transport info */ - spinlock_t xprt_lock; /* lock xprt info */ + spinlock_t reserve_lock; /* lock slot table */ struct rpc_task * snd_task; /* Task blocked in send */ struct list_head recv; diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 1f0da8c1a3b0..9c45c522e3ef 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -643,9 +643,9 @@ void xprt_reserve(struct rpc_task *task) task->tk_status = -EIO; if (!xprt->shutdown) { - spin_lock(&xprt->xprt_lock); + spin_lock(&xprt->reserve_lock); do_xprt_reserve(task); - spin_unlock(&xprt->xprt_lock); + spin_unlock(&xprt->reserve_lock); } } @@ -698,10 +698,10 @@ void xprt_release(struct rpc_task *task) dprintk("RPC: %4d release request %p\n", task->tk_pid, req); - spin_lock(&xprt->xprt_lock); + spin_lock(&xprt->reserve_lock); list_add(&req->rq_list, &xprt->free); xprt_clear_backlog(xprt); - spin_unlock(&xprt->xprt_lock); + spin_unlock(&xprt->reserve_lock); } /** @@ -751,7 +751,7 @@ static struct rpc_xprt *xprt_setup(int proto, struct sockaddr_in *ap, struct rpc } spin_lock_init(&xprt->transport_lock); - spin_lock_init(&xprt->xprt_lock); + spin_lock_init(&xprt->reserve_lock); init_waitqueue_head(&xprt->cong_wait); INIT_LIST_HEAD(&xprt->free); -- GitLab From 2226feb6bcd0e5e117a9be3ea3dd3ffc14f3e41e Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:38 -0400 Subject: [PATCH 0117/1519] [PATCH] RPC: rename the sockstate field Clean-up: get rid of a name reference to sockets in the generic parts of the RPC client by renaming the sockstate field in the rpc_xprt structure. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:53 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 60 ++++++++++++++++++++++++++++++------- net/sunrpc/xprt.c | 14 ++++----- net/sunrpc/xprtsock.c | 6 ++-- 3 files changed, 58 insertions(+), 22 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 41ce296dded1..009a3bb4f997 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -163,7 +163,7 @@ struct rpc_xprt { struct list_head free; /* free slots */ struct rpc_rqst * slot; /* slot table storage */ unsigned int max_reqs; /* total slots */ - unsigned long sockstate; /* Socket state */ + unsigned long state; /* transport state */ unsigned char shutdown : 1, /* being shut down */ nocong : 1, /* no congestion control */ resvport : 1, /* use a reserved port */ @@ -240,16 +240,54 @@ int xs_setup_udp(struct rpc_xprt *, int xs_setup_tcp(struct rpc_xprt *, struct rpc_timeout *); -#define XPRT_LOCKED 0 -#define XPRT_CONNECT 1 -#define XPRT_CONNECTING 2 - -#define xprt_connected(xp) (test_bit(XPRT_CONNECT, &(xp)->sockstate)) -#define xprt_set_connected(xp) (set_bit(XPRT_CONNECT, &(xp)->sockstate)) -#define xprt_test_and_set_connected(xp) (test_and_set_bit(XPRT_CONNECT, &(xp)->sockstate)) -#define xprt_test_and_clear_connected(xp) \ - (test_and_clear_bit(XPRT_CONNECT, &(xp)->sockstate)) -#define xprt_clear_connected(xp) (clear_bit(XPRT_CONNECT, &(xp)->sockstate)) +/* + * Reserved bit positions in xprt->state + */ +#define XPRT_LOCKED (0) +#define XPRT_CONNECTED (1) +#define XPRT_CONNECTING (2) + +static inline void xprt_set_connected(struct rpc_xprt *xprt) +{ + set_bit(XPRT_CONNECTED, &xprt->state); +} + +static inline void xprt_clear_connected(struct rpc_xprt *xprt) +{ + clear_bit(XPRT_CONNECTED, &xprt->state); +} + +static inline int xprt_connected(struct rpc_xprt *xprt) +{ + return test_bit(XPRT_CONNECTED, &xprt->state); +} + +static inline int xprt_test_and_set_connected(struct rpc_xprt *xprt) +{ + return test_and_set_bit(XPRT_CONNECTED, &xprt->state); +} + +static inline int xprt_test_and_clear_connected(struct rpc_xprt *xprt) +{ + return test_and_clear_bit(XPRT_CONNECTED, &xprt->state); +} + +static inline void xprt_clear_connecting(struct rpc_xprt *xprt) +{ + smp_mb__before_clear_bit(); + clear_bit(XPRT_CONNECTING, &xprt->state); + smp_mb__after_clear_bit(); +} + +static inline int xprt_connecting(struct rpc_xprt *xprt) +{ + return test_bit(XPRT_CONNECTING, &xprt->state); +} + +static inline int xprt_test_and_set_connecting(struct rpc_xprt *xprt) +{ + return test_and_set_bit(XPRT_CONNECTING, &xprt->state); +} #endif /* __KERNEL__*/ diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 9c45c522e3ef..57c5e77b155e 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -74,7 +74,7 @@ __xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) { struct rpc_rqst *req = task->tk_rqstp; - if (test_and_set_bit(XPRT_LOCKED, &xprt->sockstate)) { + if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) { if (task == xprt->snd_task) return 1; goto out_sleep; @@ -88,7 +88,7 @@ __xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) return 1; } smp_mb__before_clear_bit(); - clear_bit(XPRT_LOCKED, &xprt->sockstate); + clear_bit(XPRT_LOCKED, &xprt->state); smp_mb__after_clear_bit(); out_sleep: dprintk("RPC: %4d failed to lock socket %p\n", task->tk_pid, xprt); @@ -118,7 +118,7 @@ __xprt_lock_write_next(struct rpc_xprt *xprt) { struct rpc_task *task; - if (test_and_set_bit(XPRT_LOCKED, &xprt->sockstate)) + if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) return; if (!xprt->nocong && RPCXPRT_CONGESTED(xprt)) goto out_unlock; @@ -139,7 +139,7 @@ __xprt_lock_write_next(struct rpc_xprt *xprt) } out_unlock: smp_mb__before_clear_bit(); - clear_bit(XPRT_LOCKED, &xprt->sockstate); + clear_bit(XPRT_LOCKED, &xprt->state); smp_mb__after_clear_bit(); } @@ -152,7 +152,7 @@ __xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) if (xprt->snd_task == task) { xprt->snd_task = NULL; smp_mb__before_clear_bit(); - clear_bit(XPRT_LOCKED, &xprt->sockstate); + clear_bit(XPRT_LOCKED, &xprt->state); smp_mb__after_clear_bit(); __xprt_lock_write_next(xprt); } @@ -312,11 +312,11 @@ xprt_init_autodisconnect(unsigned long data) spin_lock(&xprt->transport_lock); if (!list_empty(&xprt->recv) || xprt->shutdown) goto out_abort; - if (test_and_set_bit(XPRT_LOCKED, &xprt->sockstate)) + if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) goto out_abort; spin_unlock(&xprt->transport_lock); /* Let keventd close the socket */ - if (test_bit(XPRT_CONNECTING, &xprt->sockstate) != 0) + if (xprt_connecting(xprt)) xprt_release_write(xprt, NULL); else schedule_work(&xprt->task_cleanup); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index bc90caab6088..76a33b54f436 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -925,9 +925,7 @@ static void xs_connect_worker(void *args) else rpc_wake_up(&xprt->pending); out_clear: - smp_mb__before_clear_bit(); - clear_bit(XPRT_CONNECTING, &xprt->sockstate); - smp_mb__after_clear_bit(); + xprt_clear_connecting(xprt); } /** @@ -940,7 +938,7 @@ static void xs_connect(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; - if (!test_and_set_bit(XPRT_CONNECTING, &xprt->sockstate)) { + if (!xprt_test_and_set_connecting(xprt)) { if (xprt->sock != NULL) { dprintk("RPC: xs_connect delayed xprt %p\n", xprt); schedule_delayed_work(&xprt->sock_connect, -- GitLab From 86b9f57dfdf455763d2be73a742a9a88bb664173 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:41 -0400 Subject: [PATCH 0118/1519] [PATCH] RPC: Eliminate socket.h includes in RPC client Clean-up: get rid of unnecessary socket.h and in.h includes in the generic parts of the RPC client. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:06:23 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/auth.c | 1 - net/sunrpc/auth_gss/auth_gss.c | 2 -- net/sunrpc/auth_gss/gss_krb5_mech.c | 1 - net/sunrpc/auth_gss/gss_mech_switch.c | 1 - net/sunrpc/auth_null.c | 2 -- net/sunrpc/auth_unix.c | 2 -- net/sunrpc/clnt.c | 1 - net/sunrpc/sunrpc_syms.c | 1 - 8 files changed, 11 deletions(-) diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c index 505e2d4b3d62..a415d99c394d 100644 --- a/net/sunrpc/auth.c +++ b/net/sunrpc/auth.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 2f7b867161d2..53a030acdf75 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -42,8 +42,6 @@ #include #include #include -#include -#include #include #include #include diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index 606a8a82cafb..462c5b86b073 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c index 9dfb68377d69..58aeaddd8c79 100644 --- a/net/sunrpc/auth_gss/gss_mech_switch.c +++ b/net/sunrpc/auth_gss/gss_mech_switch.c @@ -35,7 +35,6 @@ #include #include -#include #include #include #include diff --git a/net/sunrpc/auth_null.c b/net/sunrpc/auth_null.c index 9b72d3abf823..f56767aaa927 100644 --- a/net/sunrpc/auth_null.c +++ b/net/sunrpc/auth_null.c @@ -7,9 +7,7 @@ */ #include -#include #include -#include #include #include #include diff --git a/net/sunrpc/auth_unix.c b/net/sunrpc/auth_unix.c index 4ff297a9b15b..890fb5ea0dcb 100644 --- a/net/sunrpc/auth_unix.c +++ b/net/sunrpc/auth_unix.c @@ -9,8 +9,6 @@ #include #include #include -#include -#include #include #include diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index ab50c3c9e6a8..0d1b010a4a01 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c index ed48ff022d35..2387e7b823ff 100644 --- a/net/sunrpc/sunrpc_syms.c +++ b/net/sunrpc/sunrpc_syms.c @@ -10,7 +10,6 @@ #include #include -#include #include #include #include -- GitLab From 44fbac2288dfed6f1963ac00bf922c3bcd779cd1 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:44 -0400 Subject: [PATCH 0119/1519] [PATCH] RPC: Add helper for waking tasks pending on a transport Clean-up: remove only reference to xprt->pending from the socket transport implementation. This makes a cleaner interface for other transport implementations as well. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:06:52 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 1 + net/sunrpc/xprt.c | 18 ++++++++++++++++-- net/sunrpc/xprtsock.c | 7 ++----- 3 files changed, 19 insertions(+), 7 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 009a3bb4f997..d5223993fca9 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -232,6 +232,7 @@ void xprt_reserve(struct rpc_task *); int xprt_prepare_transmit(struct rpc_task *); void xprt_transmit(struct rpc_task *); void xprt_receive(struct rpc_task *); +void xprt_wake_pending_tasks(struct rpc_xprt *, int); int xprt_adjust_timeout(struct rpc_rqst *req); void xprt_release(struct rpc_task *); void xprt_connect(struct rpc_task *); diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 57c5e77b155e..2f9cd468b953 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -227,6 +227,20 @@ xprt_adjust_cwnd(struct rpc_xprt *xprt, int result) xprt->cwnd = cwnd; } +/** + * xprt_wake_pending_tasks - wake all tasks on a transport's pending queue + * @xprt: transport with waiting tasks + * @status: result code to plant in each task before waking it + * + */ +void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status) +{ + if (status < 0) + rpc_wake_up_status(&xprt->pending, status); + else + rpc_wake_up(&xprt->pending); +} + static void xprt_reset_majortimeo(struct rpc_rqst *req) { struct rpc_timeout *to = &req->rq_xprt->timeout; @@ -300,7 +314,7 @@ void xprt_disconnect(struct rpc_xprt *xprt) dprintk("RPC: disconnected transport %p\n", xprt); spin_lock_bh(&xprt->transport_lock); xprt_clear_connected(xprt); - rpc_wake_up_status(&xprt->pending, -ENOTCONN); + xprt_wake_pending_tasks(xprt, -ENOTCONN); spin_unlock_bh(&xprt->transport_lock); } @@ -803,7 +817,7 @@ static void xprt_shutdown(struct rpc_xprt *xprt) xprt->shutdown = 1; rpc_wake_up(&xprt->sending); rpc_wake_up(&xprt->resend); - rpc_wake_up(&xprt->pending); + xprt_wake_pending_tasks(xprt, -EIO); rpc_wake_up(&xprt->backlog); wake_up(&xprt->cong_wait); del_timer_sync(&xprt->timer); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 76a33b54f436..182da2edf61c 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -703,7 +703,7 @@ static void xs_tcp_state_change(struct sock *sk) xprt->tcp_reclen = 0; xprt->tcp_copied = 0; xprt->tcp_flags = XPRT_COPY_RECM | XPRT_COPY_XID; - rpc_wake_up(&xprt->pending); + xprt_wake_pending_tasks(xprt, 0); } spin_unlock_bh(&xprt->transport_lock); break; @@ -920,10 +920,7 @@ static void xs_connect_worker(void *args) } } out: - if (status < 0) - rpc_wake_up_status(&xprt->pending, status); - else - rpc_wake_up(&xprt->pending); + xprt_wake_pending_tasks(xprt, status); out_clear: xprt_clear_connecting(xprt); } -- GitLab From 55aa4f58aa43dc9a51fb80010630d94b96053a2e Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:47 -0400 Subject: [PATCH 0120/1519] [PATCH] RPC: client-side transport switch cleanup Clean-up: change some comments to reflect the realities of the new RPC transport switch mechanism. Get rid of unused xprt_receive() prototype. Also, organize function prototypes in xprt.h by usage and scope. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:07:21 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 61 +++++++++++++++++++++---------------- net/sunrpc/clnt.c | 2 +- net/sunrpc/xprt.c | 26 ++++++++-------- net/sunrpc/xprtsock.c | 12 +++++--- 4 files changed, 55 insertions(+), 46 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index d5223993fca9..bfbc492ae36d 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -1,5 +1,5 @@ /* - * linux/include/linux/sunrpc/clnt_xprt.h + * linux/include/linux/sunrpc/xprt.h * * Declarations for the RPC transport interface. * @@ -150,8 +150,8 @@ struct rpc_xprt { unsigned long cong; /* current congestion */ unsigned long cwnd; /* congestion window */ - unsigned int rcvsize, /* socket receive buffer size */ - sndsize; /* socket send buffer size */ + unsigned int rcvsize, /* transport rcv buffer size */ + sndsize; /* transport send buffer size */ size_t max_payload; /* largest RPC payload size, in bytes */ @@ -184,12 +184,12 @@ struct rpc_xprt { unsigned long tcp_copied, /* copied to request */ tcp_flags; /* - * Connection of sockets + * Connection of transports */ - struct work_struct sock_connect; + struct work_struct connect_worker; unsigned short port; /* - * Disconnection of idle sockets + * Disconnection of idle transports */ struct work_struct task_cleanup; struct timer_list timer; @@ -219,27 +219,36 @@ struct rpc_xprt { #ifdef __KERNEL__ -struct rpc_xprt * xprt_create_proto(int proto, struct sockaddr_in *addr, - struct rpc_timeout *toparms); -void xprt_disconnect(struct rpc_xprt *); -int xprt_destroy(struct rpc_xprt *); -void xprt_set_timeout(struct rpc_timeout *, unsigned int, - unsigned long); -struct rpc_rqst * xprt_lookup_rqst(struct rpc_xprt *, u32); -void xprt_complete_rqst(struct rpc_xprt *, - struct rpc_rqst *, int); -void xprt_reserve(struct rpc_task *); -int xprt_prepare_transmit(struct rpc_task *); -void xprt_transmit(struct rpc_task *); -void xprt_receive(struct rpc_task *); -void xprt_wake_pending_tasks(struct rpc_xprt *, int); +/* + * Transport operations used by ULPs + */ +struct rpc_xprt * xprt_create_proto(int proto, struct sockaddr_in *addr, struct rpc_timeout *to); +void xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long incr); + +/* + * Generic internal transport functions + */ +void xprt_connect(struct rpc_task *task); +void xprt_reserve(struct rpc_task *task); +int xprt_prepare_transmit(struct rpc_task *task); +void xprt_transmit(struct rpc_task *task); int xprt_adjust_timeout(struct rpc_rqst *req); -void xprt_release(struct rpc_task *); -void xprt_connect(struct rpc_task *); -int xs_setup_udp(struct rpc_xprt *, - struct rpc_timeout *); -int xs_setup_tcp(struct rpc_xprt *, - struct rpc_timeout *); +void xprt_release(struct rpc_task *task); +int xprt_destroy(struct rpc_xprt *xprt); + +/* + * Transport switch helper functions + */ +void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status); +struct rpc_rqst * xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid); +void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied); +void xprt_disconnect(struct rpc_xprt *xprt); + +/* + * Socket transport setup operations + */ +int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to); +int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to); /* * Reserved bit positions in xprt->state diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 0d1b010a4a01..4677959d2834 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1,5 +1,5 @@ /* - * linux/net/sunrpc/rpcclnt.c + * linux/net/sunrpc/clnt.c * * This file contains the high-level RPC interface. * It is modeled as a finite state machine to support both synchronous diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 2f9cd468b953..247fa1ec870c 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -10,12 +10,12 @@ * one is available. Otherwise, it sleeps on the backlog queue * (xprt_reserve). * - Next, the caller puts together the RPC message, stuffs it into - * the request struct, and calls xprt_call(). - * - xprt_call transmits the message and installs the caller on the - * socket's wait list. At the same time, it installs a timer that + * the request struct, and calls xprt_transmit(). + * - xprt_transmit sends the message and installs the caller on the + * transport's wait list. At the same time, it installs a timer that * is run after the packet's timeout has expired. * - When a packet arrives, the data_ready handler walks the list of - * pending requests for that socket. If a matching XID is found, the + * pending requests for that transport. If a matching XID is found, the * caller is woken up, and the timer removed. * - When no reply arrives within the timeout interval, the timer is * fired by the kernel and runs xprt_timer(). It either adjusts the @@ -32,6 +32,8 @@ * tasks that rely on callbacks. * * Copyright (C) 1995-1997, Olaf Kirch + * + * Transport switch API copyright (C) 2005, Chuck Lever */ #include @@ -52,8 +54,6 @@ # define RPCDBG_FACILITY RPCDBG_XPRT #endif -#define XPRT_MAX_BACKOFF (8) - /* * Local functions */ @@ -65,9 +65,9 @@ static int __xprt_get_cong(struct rpc_xprt *, struct rpc_task *); static int xprt_clear_backlog(struct rpc_xprt *xprt); /* - * Serialize write access to sockets, in order to prevent different + * Serialize write access to transports, in order to prevent different * requests from interfering with each other. - * Also prevents TCP socket connects from colliding with writes. + * Also prevents transport connects from colliding with writes. */ static int __xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) @@ -91,7 +91,7 @@ __xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) clear_bit(XPRT_LOCKED, &xprt->state); smp_mb__after_clear_bit(); out_sleep: - dprintk("RPC: %4d failed to lock socket %p\n", task->tk_pid, xprt); + dprintk("RPC: %4d failed to lock transport %p\n", task->tk_pid, xprt); task->tk_timeout = 0; task->tk_status = -EAGAIN; if (req && req->rq_ntrans) @@ -144,7 +144,7 @@ __xprt_lock_write_next(struct rpc_xprt *xprt) } /* - * Releases the socket for use by other requests. + * Releases the transport for use by other requests. */ static void __xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) @@ -294,8 +294,7 @@ int xprt_adjust_timeout(struct rpc_rqst *req) return status; } -static void -xprt_socket_autoclose(void *args) +static void xprt_autoclose(void *args) { struct rpc_xprt *xprt = (struct rpc_xprt *)args; @@ -329,7 +328,6 @@ xprt_init_autodisconnect(unsigned long data) if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) goto out_abort; spin_unlock(&xprt->transport_lock); - /* Let keventd close the socket */ if (xprt_connecting(xprt)) xprt_release_write(xprt, NULL); else @@ -770,7 +768,7 @@ static struct rpc_xprt *xprt_setup(int proto, struct sockaddr_in *ap, struct rpc INIT_LIST_HEAD(&xprt->free); INIT_LIST_HEAD(&xprt->recv); - INIT_WORK(&xprt->task_cleanup, xprt_socket_autoclose, xprt); + INIT_WORK(&xprt->task_cleanup, xprt_autoclose, xprt); init_timer(&xprt->timer); xprt->timer.function = xprt_init_autodisconnect; xprt->timer.data = (unsigned long) xprt; diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 182da2edf61c..7f0b9f7f167b 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -11,6 +11,8 @@ * Rewrite of larges part of the code in order to stabilize TCP stuff. * Fix behaviour when socket buffer is full. * (C) 1999 Trond Myklebust + * + * IP socket transport implementation, (C) 2005 Chuck Lever */ #include @@ -363,7 +365,7 @@ static void xs_destroy(struct rpc_xprt *xprt) { dprintk("RPC: xs_destroy xprt %p\n", xprt); - cancel_delayed_work(&xprt->sock_connect); + cancel_delayed_work(&xprt->connect_worker); flush_scheduled_work(); xprt_disconnect(xprt); @@ -938,11 +940,11 @@ static void xs_connect(struct rpc_task *task) if (!xprt_test_and_set_connecting(xprt)) { if (xprt->sock != NULL) { dprintk("RPC: xs_connect delayed xprt %p\n", xprt); - schedule_delayed_work(&xprt->sock_connect, + schedule_delayed_work(&xprt->connect_worker, RPC_REESTABLISH_TIMEOUT); } else { dprintk("RPC: xs_connect scheduled xprt %p\n", xprt); - schedule_work(&xprt->sock_connect); + schedule_work(&xprt->connect_worker); /* flush_scheduled_work can sleep... */ if (!RPC_IS_ASYNC(task)) flush_scheduled_work(); @@ -989,7 +991,7 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) /* XXX: header size can vary due to auth type, IPv6, etc. */ xprt->max_payload = (1U << 16) - (MAX_HEADER << 3); - INIT_WORK(&xprt->sock_connect, xs_connect_worker, xprt); + INIT_WORK(&xprt->connect_worker, xs_connect_worker, xprt); xprt->ops = &xs_ops; @@ -1028,7 +1030,7 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; xprt->max_payload = (1U << 31) - 1; - INIT_WORK(&xprt->sock_connect, xs_connect_worker, xprt); + INIT_WORK(&xprt->connect_worker, xs_connect_worker, xprt); xprt->ops = &xs_ops; -- GitLab From c7b2cae8a634015b72941ba2fc6c4bc9b8d3a129 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:50 -0400 Subject: [PATCH 0121/1519] [PATCH] RPC: separate TCP and UDP write space callbacks Split the socket write space callback function into a TCP version and UDP version, eliminating one dependence on the "xprt->stream" variable. Keep the common pieces of this path in xprt.c so other transports can use it too. Test-plan: Write-intensive workload on a single mount point. Version: Thu, 11 Aug 2005 16:07:51 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 2 + net/sunrpc/xprt.c | 34 +++++++++++++++ net/sunrpc/xprtsock.c | 84 +++++++++++++++++++++++-------------- 3 files changed, 89 insertions(+), 31 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index bfbc492ae36d..e73174c7e450 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -240,6 +240,8 @@ int xprt_destroy(struct rpc_xprt *xprt); * Transport switch helper functions */ void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status); +void xprt_wait_for_buffer_space(struct rpc_task *task); +void xprt_write_space(struct rpc_xprt *xprt); struct rpc_rqst * xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid); void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied); void xprt_disconnect(struct rpc_xprt *xprt); diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 247fa1ec870c..31ef7dc7eed6 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -241,6 +241,40 @@ void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status) rpc_wake_up(&xprt->pending); } +/** + * xprt_wait_for_buffer_space - wait for transport output buffer to clear + * @task: task to be put to sleep + * + */ +void xprt_wait_for_buffer_space(struct rpc_task *task) +{ + struct rpc_rqst *req = task->tk_rqstp; + struct rpc_xprt *xprt = req->rq_xprt; + + task->tk_timeout = req->rq_timeout; + rpc_sleep_on(&xprt->pending, task, NULL, NULL); +} + +/** + * xprt_write_space - wake the task waiting for transport output buffer space + * @xprt: transport with waiting tasks + * + * Can be called in a soft IRQ context, so xprt_write_space never sleeps. + */ +void xprt_write_space(struct rpc_xprt *xprt) +{ + if (unlikely(xprt->shutdown)) + return; + + spin_lock_bh(&xprt->transport_lock); + if (xprt->snd_task) { + dprintk("RPC: write space: waking waiting task on xprt %p\n", + xprt); + rpc_wake_up_task(xprt->snd_task); + } + spin_unlock_bh(&xprt->transport_lock); +} + static void xprt_reset_majortimeo(struct rpc_rqst *req) { struct rpc_timeout *to = &req->rq_xprt->timeout; diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 7f0b9f7f167b..70a772d7a796 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -308,15 +308,13 @@ static int xs_send_request(struct rpc_task *task) if (status == -EAGAIN) { if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) { - /* Protect against races with xs_write_space */ + /* Protect against races with write_space */ spin_lock_bh(&xprt->transport_lock); /* Don't race with disconnect */ if (!xprt_connected(xprt)) task->tk_status = -ENOTCONN; - else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags)) { - task->tk_timeout = req->rq_timeout; - rpc_sleep_on(&xprt->pending, task, NULL, NULL); - } + else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags)) + xprt_wait_for_buffer_space(task); spin_unlock_bh(&xprt->transport_lock); return status; } @@ -721,45 +719,68 @@ static void xs_tcp_state_change(struct sock *sk) } /** - * xs_write_space - callback invoked when socket buffer space becomes - * available + * xs_udp_write_space - callback invoked when socket buffer space + * becomes available * @sk: socket whose state has changed * * Called when more output buffer space is available for this socket. * We try not to wake our writers until they can make "significant" - * progress, otherwise we'll waste resources thrashing sock_sendmsg + * progress, otherwise we'll waste resources thrashing kernel_sendmsg * with a bunch of small requests. */ -static void xs_write_space(struct sock *sk) +static void xs_udp_write_space(struct sock *sk) { - struct rpc_xprt *xprt; - struct socket *sock; - read_lock(&sk->sk_callback_lock); - if (!(xprt = xprt_from_sock(sk)) || !(sock = sk->sk_socket)) - goto out; - if (xprt->shutdown) - goto out; - /* Wait until we have enough socket memory */ - if (xprt->stream) { - /* from net/core/stream.c:sk_stream_write_space */ - if (sk_stream_wspace(sk) < sk_stream_min_wspace(sk)) + /* from net/core/sock.c:sock_def_write_space */ + if (sock_writeable(sk)) { + struct socket *sock; + struct rpc_xprt *xprt; + + if (unlikely(!(sock = sk->sk_socket))) goto out; - } else { - /* from net/core/sock.c:sock_def_write_space */ - if (!sock_writeable(sk)) + if (unlikely(!(xprt = xprt_from_sock(sk)))) + goto out; + if (unlikely(!test_and_clear_bit(SOCK_NOSPACE, &sock->flags))) goto out; + + xprt_write_space(xprt); } - if (!test_and_clear_bit(SOCK_NOSPACE, &sock->flags)) - goto out; + out: + read_unlock(&sk->sk_callback_lock); +} - spin_lock_bh(&xprt->transport_lock); - if (xprt->snd_task) - rpc_wake_up_task(xprt->snd_task); - spin_unlock_bh(&xprt->transport_lock); -out: +/** + * xs_tcp_write_space - callback invoked when socket buffer space + * becomes available + * @sk: socket whose state has changed + * + * Called when more output buffer space is available for this socket. + * We try not to wake our writers until they can make "significant" + * progress, otherwise we'll waste resources thrashing kernel_sendmsg + * with a bunch of small requests. + */ +static void xs_tcp_write_space(struct sock *sk) +{ + read_lock(&sk->sk_callback_lock); + + /* from net/core/stream.c:sk_stream_write_space */ + if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk)) { + struct socket *sock; + struct rpc_xprt *xprt; + + if (unlikely(!(sock = sk->sk_socket))) + goto out; + if (unlikely(!(xprt = xprt_from_sock(sk)))) + goto out; + if (unlikely(!test_and_clear_bit(SOCK_NOSPACE, &sock->flags))) + goto out; + + xprt_write_space(xprt); + } + + out: read_unlock(&sk->sk_callback_lock); } @@ -855,15 +876,16 @@ static void xs_bind(struct rpc_xprt *xprt, struct socket *sock) xprt->old_write_space = sk->sk_write_space; if (xprt->prot == IPPROTO_UDP) { sk->sk_data_ready = xs_udp_data_ready; + sk->sk_write_space = xs_udp_write_space; sk->sk_no_check = UDP_CSUM_NORCV; xprt_set_connected(xprt); } else { tcp_sk(sk)->nonagle = 1; /* disable Nagle's algorithm */ sk->sk_data_ready = xs_tcp_data_ready; sk->sk_state_change = xs_tcp_state_change; + sk->sk_write_space = xs_tcp_write_space; xprt_clear_connected(xprt); } - sk->sk_write_space = xs_write_space; /* Reset to new socket */ xprt->sock = sock; -- GitLab From b0d93ad511ce2f37823a07c7a3258117a431f5fb Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:53 -0400 Subject: [PATCH 0122/1519] [PATCH] RPC: separate TCP and UDP transport connection logic Create separate connection worker functions for managing UDP and TCP transport sockets. This eliminates several dependencies on "xprt->stream". Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with v2, v3, and v4. Version: Thu, 11 Aug 2005 16:08:18 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/xprtsock.c | 164 +++++++++++++++++++++++------------------- 1 file changed, 91 insertions(+), 73 deletions(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 70a772d7a796..f91529787b9b 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -836,102 +836,118 @@ static int xs_bindresvport(struct rpc_xprt *xprt, struct socket *sock) return err; } -static struct socket *xs_create(struct rpc_xprt *xprt, int proto, int resvport) +/** + * xs_udp_connect_worker - set up a UDP socket + * @args: RPC transport to connect + * + * Invoked by a work queue tasklet. + */ +static void xs_udp_connect_worker(void *args) { - struct socket *sock; - int type, err; - - dprintk("RPC: xs_create(%s %d)\n", - (proto == IPPROTO_UDP)? "udp" : "tcp", proto); + struct rpc_xprt *xprt = (struct rpc_xprt *) args; + struct socket *sock = xprt->sock; + int err, status = -EIO; - type = (proto == IPPROTO_UDP)? SOCK_DGRAM : SOCK_STREAM; + if (xprt->shutdown || xprt->addr.sin_port == 0) + goto out; - if ((err = sock_create_kern(PF_INET, type, proto, &sock)) < 0) { - dprintk("RPC: can't create socket (%d).\n", -err); - return NULL; - } + dprintk("RPC: xs_udp_connect_worker for xprt %p\n", xprt); - /* If the caller has the capability, bind to a reserved port */ - if (resvport && xs_bindresvport(xprt, sock) < 0) - goto failed; + /* Start by resetting any existing state */ + xs_close(xprt); - return sock; + if ((err = sock_create_kern(PF_INET, SOCK_DGRAM, IPPROTO_UDP, &sock)) < 0) { + dprintk("RPC: can't create UDP transport socket (%d).\n", -err); + goto out; + } -failed: - sock_release(sock); - return NULL; -} + if (xprt->resvport && xs_bindresvport(xprt, sock) < 0) { + sock_release(sock); + goto out; + } -static void xs_bind(struct rpc_xprt *xprt, struct socket *sock) -{ - struct sock *sk = sock->sk; + if (!xprt->inet) { + struct sock *sk = sock->sk; - if (xprt->inet) - return; + write_lock_bh(&sk->sk_callback_lock); - write_lock_bh(&sk->sk_callback_lock); - sk->sk_user_data = xprt; - xprt->old_data_ready = sk->sk_data_ready; - xprt->old_state_change = sk->sk_state_change; - xprt->old_write_space = sk->sk_write_space; - if (xprt->prot == IPPROTO_UDP) { + sk->sk_user_data = xprt; + xprt->old_data_ready = sk->sk_data_ready; + xprt->old_state_change = sk->sk_state_change; + xprt->old_write_space = sk->sk_write_space; sk->sk_data_ready = xs_udp_data_ready; sk->sk_write_space = xs_udp_write_space; sk->sk_no_check = UDP_CSUM_NORCV; + xprt_set_connected(xprt); - } else { - tcp_sk(sk)->nonagle = 1; /* disable Nagle's algorithm */ - sk->sk_data_ready = xs_tcp_data_ready; - sk->sk_state_change = xs_tcp_state_change; - sk->sk_write_space = xs_tcp_write_space; - xprt_clear_connected(xprt); - } - /* Reset to new socket */ - xprt->sock = sock; - xprt->inet = sk; - write_unlock_bh(&sk->sk_callback_lock); + /* Reset to new socket */ + xprt->sock = sock; + xprt->inet = sk; - return; + write_unlock_bh(&sk->sk_callback_lock); + } + xs_set_buffer_size(xprt); + status = 0; +out: + xprt_wake_pending_tasks(xprt, status); + xprt_clear_connecting(xprt); } /** - * xs_connect_worker - try to connect a socket to a remote endpoint + * xs_tcp_connect_worker - connect a TCP socket to a remote endpoint * @args: RPC transport to connect * * Invoked by a work queue tasklet. */ -static void xs_connect_worker(void *args) +static void xs_tcp_connect_worker(void *args) { struct rpc_xprt *xprt = (struct rpc_xprt *)args; struct socket *sock = xprt->sock; - int status = -EIO; + int err, status = -EIO; if (xprt->shutdown || xprt->addr.sin_port == 0) goto out; - dprintk("RPC: xs_connect_worker xprt %p\n", xprt); + dprintk("RPC: xs_tcp_connect_worker for xprt %p\n", xprt); - /* - * Start by resetting any existing state - */ + /* Start by resetting any existing socket state */ xs_close(xprt); - sock = xs_create(xprt, xprt->prot, xprt->resvport); - if (sock == NULL) { - /* couldn't create socket or bind to reserved port; - * this is likely a permanent error, so cause an abort */ + + if ((err = sock_create_kern(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock)) < 0) { + dprintk("RPC: can't create TCP transport socket (%d).\n", -err); goto out; } - xs_bind(xprt, sock); - xs_set_buffer_size(xprt); - status = 0; - if (!xprt->stream) + if (xprt->resvport && xs_bindresvport(xprt, sock) < 0) { + sock_release(sock); goto out; + } - /* - * Tell the socket layer to start connecting... - */ + if (!xprt->inet) { + struct sock *sk = sock->sk; + + write_lock_bh(&sk->sk_callback_lock); + + sk->sk_user_data = xprt; + xprt->old_data_ready = sk->sk_data_ready; + xprt->old_state_change = sk->sk_state_change; + xprt->old_write_space = sk->sk_write_space; + sk->sk_data_ready = xs_tcp_data_ready; + sk->sk_state_change = xs_tcp_state_change; + sk->sk_write_space = xs_tcp_write_space; + tcp_sk(sk)->nonagle = 1; + + xprt_clear_connected(xprt); + + /* Reset to new socket */ + xprt->sock = sock; + xprt->inet = sk; + + write_unlock_bh(&sk->sk_callback_lock); + } + + /* Tell the socket layer to start connecting... */ status = sock->ops->connect(sock, (struct sockaddr *) &xprt->addr, sizeof(xprt->addr), O_NONBLOCK); dprintk("RPC: %p connect status %d connected %d sock state %d\n", @@ -959,18 +975,20 @@ static void xs_connect(struct rpc_task *task) { struct rpc_xprt *xprt = task->tk_xprt; - if (!xprt_test_and_set_connecting(xprt)) { - if (xprt->sock != NULL) { - dprintk("RPC: xs_connect delayed xprt %p\n", xprt); - schedule_delayed_work(&xprt->connect_worker, + if (xprt_test_and_set_connecting(xprt)) + return; + + if (xprt->sock != NULL) { + dprintk("RPC: xs_connect delayed xprt %p\n", xprt); + schedule_delayed_work(&xprt->connect_worker, RPC_REESTABLISH_TIMEOUT); - } else { - dprintk("RPC: xs_connect scheduled xprt %p\n", xprt); - schedule_work(&xprt->connect_worker); - /* flush_scheduled_work can sleep... */ - if (!RPC_IS_ASYNC(task)) - flush_scheduled_work(); - } + } else { + dprintk("RPC: xs_connect scheduled xprt %p\n", xprt); + schedule_work(&xprt->connect_worker); + + /* flush_scheduled_work can sleep... */ + if (!RPC_IS_ASYNC(task)) + flush_scheduled_work(); } } @@ -1013,7 +1031,7 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) /* XXX: header size can vary due to auth type, IPv6, etc. */ xprt->max_payload = (1U << 16) - (MAX_HEADER << 3); - INIT_WORK(&xprt->connect_worker, xs_connect_worker, xprt); + INIT_WORK(&xprt->connect_worker, xs_udp_connect_worker, xprt); xprt->ops = &xs_ops; @@ -1052,7 +1070,7 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; xprt->max_payload = (1U << 31) - 1; - INIT_WORK(&xprt->connect_worker, xs_connect_worker, xprt); + INIT_WORK(&xprt->connect_worker, xs_tcp_connect_worker, xprt); xprt->ops = &xs_ops; -- GitLab From 262965f53defd312a294b45366ea17907b6a616b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 11 Aug 2005 16:25:56 -0400 Subject: [PATCH 0123/1519] [PATCH] RPC: separate TCP and UDP socket write paths Split the RPC client's main socket write path into a TCP version and a UDP version to eliminate another dependency on the "xprt->stream" variable. Compiler optimization removes unneeded code from xs_sendpages, as this function is now called with some constant arguments. We can now cleanly perform transport protocol-specific return code testing and error recovery in each path. Test-plan: Millions of fsx operations. Performance characterization such as "sio" or "iozone". Examine oprofile results for any changes before and after this patch is applied. Version: Thu, 11 Aug 2005 16:08:46 -0400 Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/xprtsock.c | 215 +++++++++++++++++++++++++----------------- 1 file changed, 128 insertions(+), 87 deletions(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index f91529787b9b..57988300640a 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -40,6 +40,12 @@ */ #define XS_MAX_RESVPORT (800U) +/* + * How many times to try sending a request on a socket before waiting + * for the socket buffer to clear. + */ +#define XS_SENDMSG_RETRY (10U) + #ifdef RPC_DEBUG # undef RPC_DEBUG_DATA # define RPCDBG_FACILITY RPCDBG_TRANS @@ -114,13 +120,18 @@ static int xs_send_tail(struct socket *sock, struct xdr_buf *xdr, unsigned int b * @base: starting position in the buffer * */ -static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base) +static inline int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, struct xdr_buf *xdr, unsigned int base) { struct page **ppage = xdr->pages; unsigned int len, pglen = xdr->page_len; int err, ret = 0; ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int); + if (unlikely(!sock)) + return -ENOTCONN; + + clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags); + len = xdr->head[0].iov_len; if (base < len || (addr != NULL && base == 0)) { err = xs_send_head(sock, addr, addrlen, xdr, base, len); @@ -187,140 +198,162 @@ static int xs_sendpages(struct socket *sock, struct sockaddr *addr, int addrlen, } /** - * xs_sendmsg - write an RPC request to a socket - * @xprt: generic transport - * @req: the RPC request to write + * xs_nospace - place task on wait queue if transmit was incomplete + * @task: task to put to sleep * */ -static int xs_sendmsg(struct rpc_xprt *xprt, struct rpc_rqst *req) +static void xs_nospace(struct rpc_task *task) { - struct socket *sock = xprt->sock; - struct xdr_buf *xdr = &req->rq_snd_buf; - struct sockaddr *addr = NULL; - int addrlen = 0; - unsigned int skip; - int result; + struct rpc_rqst *req = task->tk_rqstp; + struct rpc_xprt *xprt = req->rq_xprt; - if (!sock) - return -ENOTCONN; + dprintk("RPC: %4d xmit incomplete (%u left of %u)\n", + task->tk_pid, req->rq_slen - req->rq_bytes_sent, + req->rq_slen); + + if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) { + /* Protect against races with write_space */ + spin_lock_bh(&xprt->transport_lock); + + /* Don't race with disconnect */ + if (!xprt_connected(xprt)) + task->tk_status = -ENOTCONN; + else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags)) + xprt_wait_for_buffer_space(task); + + spin_unlock_bh(&xprt->transport_lock); + } else + /* Keep holding the socket if it is blocked */ + rpc_delay(task, HZ>>4); +} + +/** + * xs_udp_send_request - write an RPC request to a UDP socket + * @task: address of RPC task that manages the state of an RPC request + * + * Return values: + * 0: The request has been sent + * EAGAIN: The socket was blocked, please call again later to + * complete the request + * ENOTCONN: Caller needs to invoke connect logic then call again + * other: Some other error occured, the request was not sent + */ +static int xs_udp_send_request(struct rpc_task *task) +{ + struct rpc_rqst *req = task->tk_rqstp; + struct rpc_xprt *xprt = req->rq_xprt; + struct xdr_buf *xdr = &req->rq_snd_buf; + int status; xs_pktdump("packet data:", req->rq_svec->iov_base, req->rq_svec->iov_len); - /* For UDP, we need to provide an address */ - if (!xprt->stream) { - addr = (struct sockaddr *) &xprt->addr; - addrlen = sizeof(xprt->addr); - } - /* Don't repeat bytes */ - skip = req->rq_bytes_sent; + req->rq_xtime = jiffies; + status = xs_sendpages(xprt->sock, (struct sockaddr *) &xprt->addr, + sizeof(xprt->addr), xdr, req->rq_bytes_sent); - clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags); - result = xs_sendpages(sock, addr, addrlen, xdr, skip); + dprintk("RPC: xs_udp_send_request(%u) = %d\n", + xdr->len - req->rq_bytes_sent, status); - dprintk("RPC: xs_sendmsg(%d) = %d\n", xdr->len - skip, result); + if (likely(status >= (int) req->rq_slen)) + return 0; - if (result >= 0) - return result; + /* Still some bytes left; set up for a retry later. */ + if (status > 0) + status = -EAGAIN; - switch (result) { + switch (status) { + case -ENETUNREACH: + case -EPIPE: case -ECONNREFUSED: /* When the server has died, an ICMP port unreachable message * prompts ECONNREFUSED. */ - case -EAGAIN: break; - case -ECONNRESET: - case -ENOTCONN: - case -EPIPE: - /* connection broken */ - if (xprt->stream) - result = -ENOTCONN; + case -EAGAIN: + xs_nospace(task); break; default: + dprintk("RPC: sendmsg returned unrecognized error %d\n", + -status); break; } - return result; + + return status; } /** - * xs_send_request - write an RPC request to a socket + * xs_tcp_send_request - write an RPC request to a TCP socket * @task: address of RPC task that manages the state of an RPC request * * Return values: - * 0: The request has been sent - * EAGAIN: The socket was blocked, please call again later to - * complete the request - * other: Some other error occured, the request was not sent + * 0: The request has been sent + * EAGAIN: The socket was blocked, please call again later to + * complete the request + * ENOTCONN: Caller needs to invoke connect logic then call again + * other: Some other error occured, the request was not sent * * XXX: In the case of soft timeouts, should we eventually give up - * if the socket is not able to make progress? + * if sendmsg is not able to make progress? */ -static int xs_send_request(struct rpc_task *task) +static int xs_tcp_send_request(struct rpc_task *task) { struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; + struct xdr_buf *xdr = &req->rq_snd_buf; + u32 *marker = req->rq_svec[0].iov_base; int status, retry = 0; - /* set up everything as needed. */ /* Write the record marker */ - if (xprt->stream) { - u32 *marker = req->rq_svec[0].iov_base; + *marker = htonl(0x80000000|(req->rq_slen-sizeof(*marker))); - *marker = htonl(0x80000000|(req->rq_slen-sizeof(*marker))); - } + xs_pktdump("packet data:", + req->rq_svec->iov_base, + req->rq_svec->iov_len); /* Continue transmitting the packet/record. We must be careful * to cope with writespace callbacks arriving _after_ we have - * called sendmsg(). - */ + * called sendmsg(). */ while (1) { req->rq_xtime = jiffies; - status = xs_sendmsg(xprt, req); + status = xs_sendpages(xprt->sock, NULL, 0, xdr, + req->rq_bytes_sent); - if (status < 0) - break; + dprintk("RPC: xs_tcp_send_request(%u) = %d\n", + xdr->len - req->rq_bytes_sent, status); - if (xprt->stream) { - req->rq_bytes_sent += status; - - /* If we've sent the entire packet, immediately - * reset the count of bytes sent. */ - if (req->rq_bytes_sent >= req->rq_slen) { - req->rq_bytes_sent = 0; - return 0; - } - } else { - if (status >= req->rq_slen) - return 0; - status = -EAGAIN; + if (unlikely(status < 0)) break; - } - dprintk("RPC: %4d xmit incomplete (%d left of %d)\n", - task->tk_pid, req->rq_slen - req->rq_bytes_sent, - req->rq_slen); + /* If we've sent the entire packet, immediately + * reset the count of bytes sent. */ + req->rq_bytes_sent += status; + if (likely(req->rq_bytes_sent >= req->rq_slen)) { + req->rq_bytes_sent = 0; + return 0; + } status = -EAGAIN; - if (retry++ > 50) + if (retry++ > XS_SENDMSG_RETRY) break; } - if (status == -EAGAIN) { - if (test_bit(SOCK_ASYNC_NOSPACE, &xprt->sock->flags)) { - /* Protect against races with write_space */ - spin_lock_bh(&xprt->transport_lock); - /* Don't race with disconnect */ - if (!xprt_connected(xprt)) - task->tk_status = -ENOTCONN; - else if (test_bit(SOCK_NOSPACE, &xprt->sock->flags)) - xprt_wait_for_buffer_space(task); - spin_unlock_bh(&xprt->transport_lock); - return status; - } - /* Keep holding the socket if it is blocked */ - rpc_delay(task, HZ>>4); + switch (status) { + case -EAGAIN: + xs_nospace(task); + break; + case -ECONNREFUSED: + case -ECONNRESET: + case -ENOTCONN: + case -EPIPE: + status = -ENOTCONN; + break; + default: + dprintk("RPC: sendmsg returned unrecognized error %d\n", + -status); + break; } + return status; } @@ -992,10 +1025,18 @@ static void xs_connect(struct rpc_task *task) } } -static struct rpc_xprt_ops xs_ops = { +static struct rpc_xprt_ops xs_udp_ops = { + .set_buffer_size = xs_set_buffer_size, + .connect = xs_connect, + .send_request = xs_udp_send_request, + .close = xs_close, + .destroy = xs_destroy, +}; + +static struct rpc_xprt_ops xs_tcp_ops = { .set_buffer_size = xs_set_buffer_size, .connect = xs_connect, - .send_request = xs_send_request, + .send_request = xs_tcp_send_request, .close = xs_close, .destroy = xs_destroy, }; @@ -1033,7 +1074,7 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) INIT_WORK(&xprt->connect_worker, xs_udp_connect_worker, xprt); - xprt->ops = &xs_ops; + xprt->ops = &xs_udp_ops; if (to) xprt->timeout = *to; @@ -1072,7 +1113,7 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) INIT_WORK(&xprt->connect_worker, xs_tcp_connect_worker, xprt); - xprt->ops = &xs_ops; + xprt->ops = &xs_tcp_ops; if (to) xprt->timeout = *to; -- GitLab From 808012fbb23a52ec59352445d2076d175ad4ab26 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:49 -0700 Subject: [PATCH 0124/1519] [PATCH] RPC: skip over transport-specific heads automatically Add a generic mechanism for skipping over transport-specific headers when constructing an RPC request. This removes another "xprt->stream" dependency. Test-plan: Write-intensive workload on a single mount point (try both UDP and TCP). Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/msg_prot.h | 25 +++++++++++++++++++++++++ include/linux/sunrpc/xprt.h | 7 +++++++ net/sunrpc/auth_gss/auth_gss.c | 6 ++---- net/sunrpc/clnt.c | 5 ++--- net/sunrpc/xprtsock.c | 24 +++++++++++++++++------- 5 files changed, 53 insertions(+), 14 deletions(-) diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h index 15f115332389..f43f237360ae 100644 --- a/include/linux/sunrpc/msg_prot.h +++ b/include/linux/sunrpc/msg_prot.h @@ -76,5 +76,30 @@ enum rpc_auth_stat { #define RPC_MAXNETNAMELEN 256 +/* + * From RFC 1831: + * + * "A record is composed of one or more record fragments. A record + * fragment is a four-byte header followed by 0 to (2**31) - 1 bytes of + * fragment data. The bytes encode an unsigned binary number; as with + * XDR integers, the byte order is from highest to lowest. The number + * encodes two values -- a boolean which indicates whether the fragment + * is the last fragment of the record (bit value 1 implies the fragment + * is the last fragment) and a 31-bit unsigned binary value which is the + * length in bytes of the fragment's data. The boolean value is the + * highest-order bit of the header; the length is the 31 low-order bits. + * (Note that this record specification is NOT in XDR standard form!)" + * + * The Linux RPC client always sends its requests in a single record + * fragment, limiting the maximum payload size for stream transports to + * 2GB. + */ + +typedef u32 rpc_fraghdr; + +#define RPC_LAST_STREAM_FRAGMENT (1U << 31) +#define RPC_FRAGMENT_SIZE_MASK (~RPC_LAST_STREAM_FRAGMENT) +#define RPC_MAX_FRAGMENT_SIZE ((1U << 31) - 1) + #endif /* __KERNEL__ */ #endif /* _LINUX_SUNRPC_MSGPROT_H_ */ diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index e73174c7e450..966c456a0f6d 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -155,6 +155,8 @@ struct rpc_xprt { size_t max_payload; /* largest RPC payload size, in bytes */ + unsigned int tsh_size; /* size of transport specific + header */ struct rpc_wait_queue sending; /* requests waiting to send */ struct rpc_wait_queue resend; /* requests waiting to resend */ @@ -236,6 +238,11 @@ int xprt_adjust_timeout(struct rpc_rqst *req); void xprt_release(struct rpc_task *task); int xprt_destroy(struct rpc_xprt *xprt); +static inline u32 *xprt_skip_transport_header(struct rpc_xprt *xprt, u32 *p) +{ + return p + xprt->tsh_size; +} + /* * Transport switch helper functions */ diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 53a030acdf75..d2b08f16c257 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -844,10 +844,8 @@ gss_marshal(struct rpc_task *task, u32 *p) /* We compute the checksum for the verifier over the xdr-encoded bytes * starting with the xid and ending at the end of the credential: */ - iov.iov_base = req->rq_snd_buf.head[0].iov_base; - if (task->tk_client->cl_xprt->stream) - /* See clnt.c:call_header() */ - iov.iov_base += 4; + iov.iov_base = xprt_skip_transport_header(task->tk_xprt, + req->rq_snd_buf.head[0].iov_base); iov.iov_len = (u8 *)p - (u8 *)iov.iov_base; xdr_buf_from_iov(&iov, &verf_buf); diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 4677959d2834..cc1b773a79d3 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1075,13 +1075,12 @@ static u32 * call_header(struct rpc_task *task) { struct rpc_clnt *clnt = task->tk_client; - struct rpc_xprt *xprt = clnt->cl_xprt; struct rpc_rqst *req = task->tk_rqstp; u32 *p = req->rq_svec[0].iov_base; /* FIXME: check buffer size? */ - if (xprt->stream) - *p++ = 0; /* fill in later */ + + p = xprt_skip_transport_header(task->tk_xprt, p); *p++ = req->rq_xid; /* XID */ *p++ = htonl(RPC_CALL); /* CALL */ *p++ = htonl(RPC_VERSION); /* RPC version */ diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 57988300640a..aaf053b1a0c4 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -282,6 +282,13 @@ static int xs_udp_send_request(struct rpc_task *task) return status; } +static inline void xs_encode_tcp_record_marker(struct xdr_buf *buf) +{ + u32 reclen = buf->len - sizeof(rpc_fraghdr); + rpc_fraghdr *base = buf->head[0].iov_base; + *base = htonl(RPC_LAST_STREAM_FRAGMENT | reclen); +} + /** * xs_tcp_send_request - write an RPC request to a TCP socket * @task: address of RPC task that manages the state of an RPC request @@ -301,11 +308,9 @@ static int xs_tcp_send_request(struct rpc_task *task) struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; struct xdr_buf *xdr = &req->rq_snd_buf; - u32 *marker = req->rq_svec[0].iov_base; int status, retry = 0; - /* Write the record marker */ - *marker = htonl(0x80000000|(req->rq_slen-sizeof(*marker))); + xs_encode_tcp_record_marker(&req->rq_snd_buf); xs_pktdump("packet data:", req->rq_svec->iov_base, @@ -503,16 +508,19 @@ static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, skb_reader_t *desc xprt->tcp_offset += used; if (used != len) return; + xprt->tcp_reclen = ntohl(xprt->tcp_recm); - if (xprt->tcp_reclen & 0x80000000) + if (xprt->tcp_reclen & RPC_LAST_STREAM_FRAGMENT) xprt->tcp_flags |= XPRT_LAST_FRAG; else xprt->tcp_flags &= ~XPRT_LAST_FRAG; - xprt->tcp_reclen &= 0x7fffffff; + xprt->tcp_reclen &= RPC_FRAGMENT_SIZE_MASK; + xprt->tcp_flags &= ~XPRT_COPY_RECM; xprt->tcp_offset = 0; + /* Sanity check of the record length */ - if (xprt->tcp_reclen < 4) { + if (unlikely(xprt->tcp_reclen < 4)) { dprintk("RPC: invalid TCP record fragment length\n"); xprt_disconnect(xprt); return; @@ -1065,6 +1073,7 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->prot = IPPROTO_UDP; xprt->port = XS_MAX_RESVPORT; + xprt->tsh_size = 0; xprt->stream = 0; xprt->nocong = 0; xprt->cwnd = RPC_INITCWND; @@ -1105,11 +1114,12 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->prot = IPPROTO_TCP; xprt->port = XS_MAX_RESVPORT; + xprt->tsh_size = sizeof(rpc_fraghdr) / sizeof(u32); xprt->stream = 1; xprt->nocong = 1; xprt->cwnd = RPC_MAXCWND(xprt); xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; - xprt->max_payload = (1U << 31) - 1; + xprt->max_payload = RPC_MAX_FRAGMENT_SIZE; INIT_WORK(&xprt->connect_worker, xs_tcp_connect_worker, xprt); -- GitLab From 43118c29dea2b23798bd42a147015cceee7fa885 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:49 -0700 Subject: [PATCH 0125/1519] [PATCH] RPC: get rid of xprt->stream Now we can fix up the last few places that use the "xprt->stream" variable, and get rid of it from the rpc_xprt structure. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/lockd/host.c | 3 +-- include/linux/sunrpc/xprt.h | 3 +-- net/sunrpc/xprt.c | 3 +-- net/sunrpc/xprtsock.c | 28 ++++++++++++++++++---------- 4 files changed, 21 insertions(+), 16 deletions(-) diff --git a/fs/lockd/host.c b/fs/lockd/host.c index 82c77df81c5f..7901f5b8092c 100644 --- a/fs/lockd/host.c +++ b/fs/lockd/host.c @@ -173,11 +173,10 @@ nlm_bind_host(struct nlm_host *host) /* If we've already created an RPC client, check whether * RPC rebind is required - * Note: why keep rebinding if we're on a tcp connection? */ if ((clnt = host->h_rpcclnt) != NULL) { xprt = clnt->cl_xprt; - if (!xprt->stream && time_after_eq(jiffies, host->h_nextrebind)) { + if (time_after_eq(jiffies, host->h_nextrebind)) { clnt->cl_port = 0; host->h_nextrebind = jiffies + NLM_HOST_REBIND; dprintk("lockd: next rebind in %ld jiffies\n", diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 966c456a0f6d..c9477f022efb 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -168,8 +168,7 @@ struct rpc_xprt { unsigned long state; /* transport state */ unsigned char shutdown : 1, /* being shut down */ nocong : 1, /* no congestion control */ - resvport : 1, /* use a reserved port */ - stream : 1; /* TCP */ + resvport : 1; /* use a reserved port */ /* * XID diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 31ef7dc7eed6..43fef7626442 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -630,8 +630,7 @@ void xprt_transmit(struct rpc_task *task) case -ENOTCONN: return; default: - if (xprt->stream) - xprt_disconnect(xprt); + break; } xprt_release_write(xprt, task); return; diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index aaf053b1a0c4..5bb6fed3df34 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -356,6 +356,7 @@ static int xs_tcp_send_request(struct rpc_task *task) default: dprintk("RPC: sendmsg returned unrecognized error %d\n", -status); + xprt_disconnect(xprt); break; } @@ -826,19 +827,17 @@ static void xs_tcp_write_space(struct sock *sk) } /** - * xs_set_buffer_size - set send and receive limits + * xs_udp_set_buffer_size - set send and receive limits * @xprt: generic transport * * Set socket send and receive limits based on the * sndsize and rcvsize fields in the generic transport - * structure. This applies only to UDP sockets. + * structure. */ -static void xs_set_buffer_size(struct rpc_xprt *xprt) +static void xs_udp_set_buffer_size(struct rpc_xprt *xprt) { struct sock *sk = xprt->inet; - if (xprt->stream) - return; if (xprt->rcvsize) { sk->sk_userlocks |= SOCK_RCVBUF_LOCK; sk->sk_rcvbuf = xprt->rcvsize * xprt->max_reqs * 2; @@ -850,6 +849,17 @@ static void xs_set_buffer_size(struct rpc_xprt *xprt) } } +/** + * xs_tcp_set_buffer_size - set send and receive limits + * @xprt: generic transport + * + * Nothing to do for TCP. + */ +static void xs_tcp_set_buffer_size(struct rpc_xprt *xprt) +{ + return; +} + static int xs_bindresvport(struct rpc_xprt *xprt, struct socket *sock) { struct sockaddr_in myaddr = { @@ -928,7 +938,7 @@ static void xs_udp_connect_worker(void *args) write_unlock_bh(&sk->sk_callback_lock); } - xs_set_buffer_size(xprt); + xs_udp_set_buffer_size(xprt); status = 0; out: xprt_wake_pending_tasks(xprt, status); @@ -1034,7 +1044,7 @@ static void xs_connect(struct rpc_task *task) } static struct rpc_xprt_ops xs_udp_ops = { - .set_buffer_size = xs_set_buffer_size, + .set_buffer_size = xs_udp_set_buffer_size, .connect = xs_connect, .send_request = xs_udp_send_request, .close = xs_close, @@ -1042,7 +1052,7 @@ static struct rpc_xprt_ops xs_udp_ops = { }; static struct rpc_xprt_ops xs_tcp_ops = { - .set_buffer_size = xs_set_buffer_size, + .set_buffer_size = xs_tcp_set_buffer_size, .connect = xs_connect, .send_request = xs_tcp_send_request, .close = xs_close, @@ -1074,7 +1084,6 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->prot = IPPROTO_UDP; xprt->port = XS_MAX_RESVPORT; xprt->tsh_size = 0; - xprt->stream = 0; xprt->nocong = 0; xprt->cwnd = RPC_INITCWND; xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; @@ -1115,7 +1124,6 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->prot = IPPROTO_TCP; xprt->port = XS_MAX_RESVPORT; xprt->tsh_size = sizeof(rpc_fraghdr) / sizeof(u32); - xprt->stream = 1; xprt->nocong = 1; xprt->cwnd = RPC_MAXCWND(xprt); xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; -- GitLab From fe3aca290f17ae4978bd73d02aa4029f1c9c024c Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:50 -0700 Subject: [PATCH 0126/1519] [PATCH] RPC: add API to set transport-specific timeouts Prepare the way to remove the "xprt->nocong" variable by adding a callout to the RPC client transport switch API to handle setting RPC retransmit timeouts. Add a pair of generic helper functions that provide the ability to set a simple fixed timeout, or to set a timeout based on the state of a round- trip estimator. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 3 ++ net/sunrpc/xprt.c | 67 +++++++++++++++++++++++++------------ net/sunrpc/xprtsock.c | 2 ++ 3 files changed, 50 insertions(+), 22 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index c9477f022efb..ac08e99a81cb 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -134,6 +134,7 @@ struct rpc_xprt_ops { void (*set_buffer_size)(struct rpc_xprt *xprt); void (*connect)(struct rpc_task *task); int (*send_request)(struct rpc_task *task); + void (*set_retrans_timeout)(struct rpc_task *task); void (*close)(struct rpc_xprt *xprt); void (*destroy)(struct rpc_xprt *xprt); }; @@ -245,6 +246,8 @@ static inline u32 *xprt_skip_transport_header(struct rpc_xprt *xprt, u32 *p) /* * Transport switch helper functions */ +void xprt_set_retrans_timeout_def(struct rpc_task *task); +void xprt_set_retrans_timeout_rtt(struct rpc_task *task); void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status); void xprt_wait_for_buffer_space(struct rpc_task *task); void xprt_write_space(struct rpc_xprt *xprt); diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 43fef7626442..1ac2fbe05102 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -275,6 +275,38 @@ void xprt_write_space(struct rpc_xprt *xprt) spin_unlock_bh(&xprt->transport_lock); } +/** + * xprt_set_retrans_timeout_def - set a request's retransmit timeout + * @task: task whose timeout is to be set + * + * Set a request's retransmit timeout based on the transport's + * default timeout parameters. Used by transports that don't adjust + * the retransmit timeout based on round-trip time estimation. + */ +void xprt_set_retrans_timeout_def(struct rpc_task *task) +{ + task->tk_timeout = task->tk_rqstp->rq_timeout; +} + +/* + * xprt_set_retrans_timeout_rtt - set a request's retransmit timeout + * @task: task whose timeout is to be set + * + * Set a request's retransmit timeout using the RTT estimator. + */ +void xprt_set_retrans_timeout_rtt(struct rpc_task *task) +{ + int timer = task->tk_msg.rpc_proc->p_timer; + struct rpc_rtt *rtt = task->tk_client->cl_rtt; + struct rpc_rqst *req = task->tk_rqstp; + unsigned long max_timeout = req->rq_xprt->timeout.to_maxval; + + task->tk_timeout = rpc_calc_rto(rtt, timer); + task->tk_timeout <<= rpc_ntimeo(rtt, timer) + req->rq_retries; + if (task->tk_timeout > max_timeout || task->tk_timeout == 0) + task->tk_timeout = max_timeout; +} + static void xprt_reset_majortimeo(struct rpc_rqst *req) { struct rpc_timeout *to = &req->rq_xprt->timeout; @@ -588,7 +620,6 @@ int xprt_prepare_transmit(struct rpc_task *task) */ void xprt_transmit(struct rpc_task *task) { - struct rpc_clnt *clnt = task->tk_client; struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; int status; @@ -613,8 +644,19 @@ void xprt_transmit(struct rpc_task *task) return; status = xprt->ops->send_request(task); - if (!status) - goto out_receive; + if (status == 0) { + dprintk("RPC: %4d xmit complete\n", task->tk_pid); + spin_lock_bh(&xprt->transport_lock); + xprt->ops->set_retrans_timeout(task); + /* Don't race with disconnect */ + if (!xprt_connected(xprt)) + task->tk_status = -ENOTCONN; + else if (!req->rq_received) + rpc_sleep_on(&xprt->pending, task, NULL, xprt_timer); + __xprt_release_write(xprt, task); + spin_unlock_bh(&xprt->transport_lock); + return; + } /* Note: at this point, task->tk_sleeping has not yet been set, * hence there is no danger of the waking up task being put on @@ -634,25 +676,6 @@ void xprt_transmit(struct rpc_task *task) } xprt_release_write(xprt, task); return; - out_receive: - dprintk("RPC: %4d xmit complete\n", task->tk_pid); - /* Set the task's receive timeout value */ - spin_lock_bh(&xprt->transport_lock); - if (!xprt->nocong) { - int timer = task->tk_msg.rpc_proc->p_timer; - task->tk_timeout = rpc_calc_rto(clnt->cl_rtt, timer); - task->tk_timeout <<= rpc_ntimeo(clnt->cl_rtt, timer) + req->rq_retries; - if (task->tk_timeout > xprt->timeout.to_maxval || task->tk_timeout == 0) - task->tk_timeout = xprt->timeout.to_maxval; - } else - task->tk_timeout = req->rq_timeout; - /* Don't race with disconnect */ - if (!xprt_connected(xprt)) - task->tk_status = -ENOTCONN; - else if (!req->rq_received) - rpc_sleep_on(&xprt->pending, task, NULL, xprt_timer); - __xprt_release_write(xprt, task); - spin_unlock_bh(&xprt->transport_lock); } static inline void do_xprt_reserve(struct rpc_task *task) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 5bb6fed3df34..79433ffd1df0 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1047,6 +1047,7 @@ static struct rpc_xprt_ops xs_udp_ops = { .set_buffer_size = xs_udp_set_buffer_size, .connect = xs_connect, .send_request = xs_udp_send_request, + .set_retrans_timeout = xprt_set_retrans_timeout_rtt, .close = xs_close, .destroy = xs_destroy, }; @@ -1055,6 +1056,7 @@ static struct rpc_xprt_ops xs_tcp_ops = { .set_buffer_size = xs_tcp_set_buffer_size, .connect = xs_connect, .send_request = xs_tcp_send_request, + .set_retrans_timeout = xprt_set_retrans_timeout_def, .close = xs_close, .destroy = xs_destroy, }; -- GitLab From 12a804698b29d040b7cdd92e8a44b0e75164dae9 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:51 -0700 Subject: [PATCH 0127/1519] [PATCH] RPC: expose API for serializing access to RPC transports The next several patches introduce an API that allows transports to choose whether the RPC client provides congestion control or whether the transport itself provides it. The first method we abstract is the one that serializes access to the RPC transport to prevent the bytes from different requests from mingling together. This method provides proper request serialization and the opportunity to prevent new requests from being started because the transport is congested. The normal situation is for the transport to handle congestion control itself. Although NFS over UDP was first, it has been recognized after years of experience that having the transport provide congestion control is much better than doing it in the RPC client. Thus TCP, and probably every future transport implementation, will use the default method, xprt_lock_write, provided in xprt.c, which does not provide any kind of congestion control. UDP can continue using the xprt.c-provided Van Jacobson congestion avoidance implementation. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 3 ++ net/sunrpc/xprt.c | 64 ++++++++++++++++++++++++++++++------- net/sunrpc/xprtsock.c | 2 ++ 3 files changed, 57 insertions(+), 12 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index ac08e99a81cb..eee1c6877851 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -132,6 +132,7 @@ struct rpc_xprt; struct rpc_xprt_ops { void (*set_buffer_size)(struct rpc_xprt *xprt); + int (*reserve_xprt)(struct rpc_task *task); void (*connect)(struct rpc_task *task); int (*send_request)(struct rpc_task *task); void (*set_retrans_timeout)(struct rpc_task *task); @@ -232,6 +233,8 @@ void xprt_set_timeout(struct rpc_timeout *to, unsigned int retr, unsigned long */ void xprt_connect(struct rpc_task *task); void xprt_reserve(struct rpc_task *task); +int xprt_reserve_xprt(struct rpc_task *task); +int xprt_reserve_xprt_cong(struct rpc_task *task); int xprt_prepare_transmit(struct rpc_task *task); void xprt_transmit(struct rpc_task *task); int xprt_adjust_timeout(struct rpc_rqst *req); diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 1ac2fbe05102..2d1e8b83dd68 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -64,14 +64,56 @@ static int __xprt_get_cong(struct rpc_xprt *, struct rpc_task *); static int xprt_clear_backlog(struct rpc_xprt *xprt); +/** + * xprt_reserve_xprt - serialize write access to transports + * @task: task that is requesting access to the transport + * + * This prevents mixing the payload of separate requests, and prevents + * transport connects from colliding with writes. No congestion control + * is provided. + */ +int xprt_reserve_xprt(struct rpc_task *task) +{ + struct rpc_xprt *xprt = task->tk_xprt; + struct rpc_rqst *req = task->tk_rqstp; + + if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) { + if (task == xprt->snd_task) + return 1; + if (task == NULL) + return 0; + goto out_sleep; + } + xprt->snd_task = task; + if (req) { + req->rq_bytes_sent = 0; + req->rq_ntrans++; + } + return 1; + +out_sleep: + dprintk("RPC: %4d failed to lock transport %p\n", + task->tk_pid, xprt); + task->tk_timeout = 0; + task->tk_status = -EAGAIN; + if (req && req->rq_ntrans) + rpc_sleep_on(&xprt->resend, task, NULL, NULL); + else + rpc_sleep_on(&xprt->sending, task, NULL, NULL); + return 0; +} + /* - * Serialize write access to transports, in order to prevent different - * requests from interfering with each other. - * Also prevents transport connects from colliding with writes. + * xprt_reserve_xprt_cong - serialize write access to transports + * @task: task that is requesting access to the transport + * + * Same as xprt_reserve_xprt, but Van Jacobson congestion control is + * integrated into the decision of whether a request is allowed to be + * woken up and given access to the transport. */ -static int -__xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) +int xprt_reserve_xprt_cong(struct rpc_task *task) { + struct rpc_xprt *xprt = task->tk_xprt; struct rpc_rqst *req = task->tk_rqstp; if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) { @@ -79,7 +121,7 @@ __xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) return 1; goto out_sleep; } - if (xprt->nocong || __xprt_get_cong(xprt, task)) { + if (__xprt_get_cong(xprt, task)) { xprt->snd_task = task; if (req) { req->rq_bytes_sent = 0; @@ -101,20 +143,18 @@ __xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) return 0; } -static inline int -xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) +static inline int xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) { int retval; spin_lock_bh(&xprt->transport_lock); - retval = __xprt_lock_write(xprt, task); + retval = xprt->ops->reserve_xprt(task); spin_unlock_bh(&xprt->transport_lock); return retval; } -static void -__xprt_lock_write_next(struct rpc_xprt *xprt) +static void __xprt_lock_write_next(struct rpc_xprt *xprt) { struct rpc_task *task; @@ -598,7 +638,7 @@ int xprt_prepare_transmit(struct rpc_task *task) err = req->rq_received; goto out_unlock; } - if (!__xprt_lock_write(xprt, task)) { + if (!xprt->ops->reserve_xprt(task)) { err = -EAGAIN; goto out_unlock; } diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 79433ffd1df0..fc4fbe8ea346 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1045,6 +1045,7 @@ static void xs_connect(struct rpc_task *task) static struct rpc_xprt_ops xs_udp_ops = { .set_buffer_size = xs_udp_set_buffer_size, + .reserve_xprt = xprt_reserve_xprt_cong, .connect = xs_connect, .send_request = xs_udp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_rtt, @@ -1054,6 +1055,7 @@ static struct rpc_xprt_ops xs_udp_ops = { static struct rpc_xprt_ops xs_tcp_ops = { .set_buffer_size = xs_tcp_set_buffer_size, + .reserve_xprt = xprt_reserve_xprt, .connect = xs_connect, .send_request = xs_tcp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_def, -- GitLab From 49e9a89086b3cae784a4868ca852863e4f4ea3fe Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:51 -0700 Subject: [PATCH 0128/1519] [PATCH] RPC: expose API for serializing access to RPC transports The next method we abstract is the one that releases a transport, allowing another task to have access to the transport. Again, one generic version of this is provided for transports that don't need the RPC client to perform congestion control, and one version is for transports that can use the original Van Jacobson implementation in xprt.c. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 3 ++ net/sunrpc/xprt.c | 77 ++++++++++++++++++++++++++++++------- net/sunrpc/xprtsock.c | 2 + 3 files changed, 68 insertions(+), 14 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index eee1c6877851..86833b725bb5 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -133,6 +133,7 @@ struct rpc_xprt; struct rpc_xprt_ops { void (*set_buffer_size)(struct rpc_xprt *xprt); int (*reserve_xprt)(struct rpc_task *task); + void (*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task); void (*connect)(struct rpc_task *task); int (*send_request)(struct rpc_task *task); void (*set_retrans_timeout)(struct rpc_task *task); @@ -238,6 +239,8 @@ int xprt_reserve_xprt_cong(struct rpc_task *task); int xprt_prepare_transmit(struct rpc_task *task); void xprt_transmit(struct rpc_task *task); int xprt_adjust_timeout(struct rpc_rqst *req); +void xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task); +void xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task); void xprt_release(struct rpc_task *task); int xprt_destroy(struct rpc_xprt *xprt); diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 2d1e8b83dd68..e92ea99dd318 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -153,14 +153,42 @@ static inline int xprt_lock_write(struct rpc_xprt *xprt, struct rpc_task *task) return retval; } - static void __xprt_lock_write_next(struct rpc_xprt *xprt) +{ + struct rpc_task *task; + struct rpc_rqst *req; + + if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) + return; + + task = rpc_wake_up_next(&xprt->resend); + if (!task) { + task = rpc_wake_up_next(&xprt->sending); + if (!task) + goto out_unlock; + } + + req = task->tk_rqstp; + xprt->snd_task = task; + if (req) { + req->rq_bytes_sent = 0; + req->rq_ntrans++; + } + return; + +out_unlock: + smp_mb__before_clear_bit(); + clear_bit(XPRT_LOCKED, &xprt->state); + smp_mb__after_clear_bit(); +} + +static void __xprt_lock_write_next_cong(struct rpc_xprt *xprt) { struct rpc_task *task; if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) return; - if (!xprt->nocong && RPCXPRT_CONGESTED(xprt)) + if (RPCXPRT_CONGESTED(xprt)) goto out_unlock; task = rpc_wake_up_next(&xprt->resend); if (!task) { @@ -168,7 +196,7 @@ static void __xprt_lock_write_next(struct rpc_xprt *xprt) if (!task) goto out_unlock; } - if (xprt->nocong || __xprt_get_cong(xprt, task)) { + if (__xprt_get_cong(xprt, task)) { struct rpc_rqst *req = task->tk_rqstp; xprt->snd_task = task; if (req) { @@ -183,11 +211,14 @@ static void __xprt_lock_write_next(struct rpc_xprt *xprt) smp_mb__after_clear_bit(); } -/* - * Releases the transport for use by other requests. +/** + * xprt_release_xprt - allow other requests to use a transport + * @xprt: transport with other tasks potentially waiting + * @task: task that is releasing access to the transport + * + * Note that "task" can be NULL. No congestion control is provided. */ -static void -__xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) +void xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task) { if (xprt->snd_task == task) { xprt->snd_task = NULL; @@ -198,11 +229,29 @@ __xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) } } -static inline void -xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) +/** + * xprt_release_xprt_cong - allow other requests to use a transport + * @xprt: transport with other tasks potentially waiting + * @task: task that is releasing access to the transport + * + * Note that "task" can be NULL. Another task is awoken to use the + * transport if the transport's congestion window allows it. + */ +void xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task) +{ + if (xprt->snd_task == task) { + xprt->snd_task = NULL; + smp_mb__before_clear_bit(); + clear_bit(XPRT_LOCKED, &xprt->state); + smp_mb__after_clear_bit(); + __xprt_lock_write_next_cong(xprt); + } +} + +static inline void xprt_release_write(struct rpc_xprt *xprt, struct rpc_task *task) { spin_lock_bh(&xprt->transport_lock); - __xprt_release_write(xprt, task); + xprt->ops->release_xprt(xprt, task); spin_unlock_bh(&xprt->transport_lock); } @@ -237,7 +286,7 @@ __xprt_put_cong(struct rpc_xprt *xprt, struct rpc_rqst *req) return; req->rq_cong = 0; xprt->cong -= RPC_CWNDSCALE; - __xprt_lock_write_next(xprt); + __xprt_lock_write_next_cong(xprt); } /* @@ -256,7 +305,7 @@ xprt_adjust_cwnd(struct rpc_xprt *xprt, int result) cwnd += (RPC_CWNDSCALE * RPC_CWNDSCALE + (cwnd >> 1)) / cwnd; if (cwnd > RPC_MAXCWND(xprt)) cwnd = RPC_MAXCWND(xprt); - __xprt_lock_write_next(xprt); + __xprt_lock_write_next_cong(xprt); } else if (result == -ETIMEDOUT) { cwnd >>= 1; if (cwnd < RPC_CWNDSCALE) @@ -693,7 +742,7 @@ void xprt_transmit(struct rpc_task *task) task->tk_status = -ENOTCONN; else if (!req->rq_received) rpc_sleep_on(&xprt->pending, task, NULL, xprt_timer); - __xprt_release_write(xprt, task); + xprt->ops->release_xprt(xprt, task); spin_unlock_bh(&xprt->transport_lock); return; } @@ -792,7 +841,7 @@ void xprt_release(struct rpc_task *task) if (!(req = task->tk_rqstp)) return; spin_lock_bh(&xprt->transport_lock); - __xprt_release_write(xprt, task); + xprt->ops->release_xprt(xprt, task); __xprt_put_cong(xprt, req); if (!list_empty(&req->rq_list)) list_del(&req->rq_list); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index fc4fbe8ea346..8589c1ad55e3 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1046,6 +1046,7 @@ static void xs_connect(struct rpc_task *task) static struct rpc_xprt_ops xs_udp_ops = { .set_buffer_size = xs_udp_set_buffer_size, .reserve_xprt = xprt_reserve_xprt_cong, + .release_xprt = xprt_release_xprt_cong, .connect = xs_connect, .send_request = xs_udp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_rtt, @@ -1056,6 +1057,7 @@ static struct rpc_xprt_ops xs_udp_ops = { static struct rpc_xprt_ops xs_tcp_ops = { .set_buffer_size = xs_tcp_set_buffer_size, .reserve_xprt = xprt_reserve_xprt, + .release_xprt = xprt_release_xprt, .connect = xs_connect, .send_request = xs_tcp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_def, -- GitLab From 46c0ee8bc4ad3743de05e8b8b20201df44dcb6d3 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:52 -0700 Subject: [PATCH 0129/1519] [PATCH] RPC: separate xprt_timer implementations Allow transports to hook the retransmit timer interrupt. Some transports calculate their congestion window here so that a retransmit timeout has immediate effect on the congestion window. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 2 ++ net/sunrpc/xprt.c | 45 +++++++++++++++++-------------------- net/sunrpc/xprtsock.c | 12 ++++++++++ 3 files changed, 34 insertions(+), 25 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 86833b725bb5..443c3f984cf9 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -137,6 +137,7 @@ struct rpc_xprt_ops { void (*connect)(struct rpc_task *task); int (*send_request)(struct rpc_task *task); void (*set_retrans_timeout)(struct rpc_task *task); + void (*timer)(struct rpc_task *task); void (*close)(struct rpc_xprt *xprt); void (*destroy)(struct rpc_xprt *xprt); }; @@ -257,6 +258,7 @@ void xprt_set_retrans_timeout_rtt(struct rpc_task *task); void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status); void xprt_wait_for_buffer_space(struct rpc_task *task); void xprt_write_space(struct rpc_xprt *xprt); +void xprt_adjust_cwnd(struct rpc_task *task, int result); struct rpc_rqst * xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid); void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied); void xprt_disconnect(struct rpc_xprt *xprt); diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index e92ea99dd318..ffc595592af3 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -289,16 +289,19 @@ __xprt_put_cong(struct rpc_xprt *xprt, struct rpc_rqst *req) __xprt_lock_write_next_cong(xprt); } -/* - * Adjust RPC congestion window +/** + * xprt_adjust_cwnd - adjust transport congestion window + * @task: recently completed RPC request used to adjust window + * @result: result code of completed RPC request + * * We use a time-smoothed congestion estimator to avoid heavy oscillation. */ -static void -xprt_adjust_cwnd(struct rpc_xprt *xprt, int result) +void xprt_adjust_cwnd(struct rpc_task *task, int result) { - unsigned long cwnd; + struct rpc_rqst *req = task->tk_rqstp; + struct rpc_xprt *xprt = task->tk_xprt; + unsigned long cwnd = xprt->cwnd; - cwnd = xprt->cwnd; if (result >= 0 && cwnd <= xprt->cong) { /* The (cwnd >> 1) term makes sure * the result gets rounded properly. */ @@ -314,6 +317,7 @@ xprt_adjust_cwnd(struct rpc_xprt *xprt, int result) dprintk("RPC: cong %ld, cwnd was %ld, now %ld\n", xprt->cong, xprt->cwnd, cwnd); xprt->cwnd = cwnd; + __xprt_put_cong(xprt, req); } /** @@ -602,8 +606,7 @@ void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied) /* Adjust congestion window */ if (!xprt->nocong) { unsigned timer = task->tk_msg.rpc_proc->p_timer; - xprt_adjust_cwnd(xprt, copied); - __xprt_put_cong(xprt, req); + xprt_adjust_cwnd(task, copied); if (timer) { if (req->rq_ntrans == 1) rpc_update_rtt(clnt->cl_rtt, timer, @@ -640,27 +643,19 @@ void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied) return; } -/* - * RPC receive timeout handler. - */ -static void -xprt_timer(struct rpc_task *task) +static void xprt_timer(struct rpc_task *task) { - struct rpc_rqst *req = task->tk_rqstp; + struct rpc_rqst *req = task->tk_rqstp; struct rpc_xprt *xprt = req->rq_xprt; - spin_lock(&xprt->transport_lock); - if (req->rq_received) - goto out; - - xprt_adjust_cwnd(req->rq_xprt, -ETIMEDOUT); - __xprt_put_cong(xprt, req); + dprintk("RPC: %4d xprt_timer\n", task->tk_pid); - dprintk("RPC: %4d xprt_timer (%s request)\n", - task->tk_pid, req ? "pending" : "backlogged"); - - task->tk_status = -ETIMEDOUT; -out: + spin_lock(&xprt->transport_lock); + if (!req->rq_received) { + if (xprt->ops->timer) + xprt->ops->timer(task); + task->tk_status = -ETIMEDOUT; + } task->tk_timeout = 0; rpc_wake_up_task(task); spin_unlock(&xprt->transport_lock); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 8589c1ad55e3..c3658ff027a6 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -860,6 +860,17 @@ static void xs_tcp_set_buffer_size(struct rpc_xprt *xprt) return; } +/** + * xs_udp_timer - called when a retransmit timeout occurs on a UDP transport + * @task: task that timed out + * + * Adjust the congestion window after a retransmit timeout has occurred. + */ +static void xs_udp_timer(struct rpc_task *task) +{ + xprt_adjust_cwnd(task, -ETIMEDOUT); +} + static int xs_bindresvport(struct rpc_xprt *xprt, struct socket *sock) { struct sockaddr_in myaddr = { @@ -1050,6 +1061,7 @@ static struct rpc_xprt_ops xs_udp_ops = { .connect = xs_connect, .send_request = xs_udp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_rtt, + .timer = xs_udp_timer, .close = xs_close, .destroy = xs_destroy, }; -- GitLab From 1570c1e41eabf6b7031f3e4322a2cf1cbe319fee Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:52 -0700 Subject: [PATCH 0130/1519] [PATCH] RPC: add generic interface for adjusting the congestion window A new interface that allows transports to adjust their congestion window using the Van Jacobson implementation in xprt.c is provided. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 3 +- net/sunrpc/xprt.c | 66 +++++++++++++++---------------------- net/sunrpc/xprtsock.c | 13 +++----- 3 files changed, 33 insertions(+), 49 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 443c3f984cf9..2e48752d55d9 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -258,9 +258,10 @@ void xprt_set_retrans_timeout_rtt(struct rpc_task *task); void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status); void xprt_wait_for_buffer_space(struct rpc_task *task); void xprt_write_space(struct rpc_xprt *xprt); +void xprt_update_rtt(struct rpc_task *task); void xprt_adjust_cwnd(struct rpc_task *task, int result); struct rpc_rqst * xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid); -void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied); +void xprt_complete_rqst(struct rpc_task *task, int copied); void xprt_disconnect(struct rpc_xprt *xprt); /* diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index ffc595592af3..707806fe1a23 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -591,56 +591,42 @@ struct rpc_rqst *xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid) return req; } +/** + * xprt_update_rtt - update an RPC client's RTT state after receiving a reply + * @task: RPC request that recently completed + * + */ +void xprt_update_rtt(struct rpc_task *task) +{ + struct rpc_rqst *req = task->tk_rqstp; + struct rpc_rtt *rtt = task->tk_client->cl_rtt; + unsigned timer = task->tk_msg.rpc_proc->p_timer; + + if (timer) { + if (req->rq_ntrans == 1) + rpc_update_rtt(rtt, timer, + (long)jiffies - req->rq_xtime); + rpc_set_timeo(rtt, timer, req->rq_ntrans - 1); + } +} + /** * xprt_complete_rqst - called when reply processing is complete - * @xprt: controlling transport - * @req: RPC request that just completed + * @task: RPC request that recently completed * @copied: actual number of bytes received from the transport * + * Caller holds transport lock. */ -void xprt_complete_rqst(struct rpc_xprt *xprt, struct rpc_rqst *req, int copied) -{ - struct rpc_task *task = req->rq_task; - struct rpc_clnt *clnt = task->tk_client; - - /* Adjust congestion window */ - if (!xprt->nocong) { - unsigned timer = task->tk_msg.rpc_proc->p_timer; - xprt_adjust_cwnd(task, copied); - if (timer) { - if (req->rq_ntrans == 1) - rpc_update_rtt(clnt->cl_rtt, timer, - (long)jiffies - req->rq_xtime); - rpc_set_timeo(clnt->cl_rtt, timer, req->rq_ntrans - 1); - } - } +void xprt_complete_rqst(struct rpc_task *task, int copied) +{ + struct rpc_rqst *req = task->tk_rqstp; -#ifdef RPC_PROFILE - /* Profile only reads for now */ - if (copied > 1024) { - static unsigned long nextstat; - static unsigned long pkt_rtt, pkt_len, pkt_cnt; - - pkt_cnt++; - pkt_len += req->rq_slen + copied; - pkt_rtt += jiffies - req->rq_xtime; - if (time_before(nextstat, jiffies)) { - printk("RPC: %lu %ld cwnd\n", jiffies, xprt->cwnd); - printk("RPC: %ld %ld %ld %ld stat\n", - jiffies, pkt_cnt, pkt_len, pkt_rtt); - pkt_rtt = pkt_len = pkt_cnt = 0; - nextstat = jiffies + 5 * HZ; - } - } -#endif + dprintk("RPC: %5u xid %08x complete (%d bytes received)\n", + task->tk_pid, ntohl(req->rq_xid), copied); - dprintk("RPC: %4d has input (%d bytes)\n", task->tk_pid, copied); list_del_init(&req->rq_list); req->rq_received = req->rq_private_buf.len = copied; - - /* ... and wake up the process. */ rpc_wake_up_task(task); - return; } static void xprt_timer(struct rpc_task *task) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index c3658ff027a6..980f26504f48 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -460,8 +460,6 @@ static void xs_udp_data_ready(struct sock *sk, int len) goto out_unlock; task = rovr->rq_task; - dprintk("RPC: %4d received reply\n", task->tk_pid); - if ((copied = rovr->rq_private_buf.buflen) > repsize) copied = repsize; @@ -472,7 +470,9 @@ static void xs_udp_data_ready(struct sock *sk, int len) /* Something worked... */ dst_confirm(skb->dst); - xprt_complete_rqst(xprt, rovr, copied); + xprt_adjust_cwnd(task, copied); + xprt_update_rtt(task); + xprt_complete_rqst(task, copied); out_unlock: spin_unlock(&xprt->transport_lock); @@ -634,11 +634,8 @@ static inline void xs_tcp_read_request(struct rpc_xprt *xprt, skb_reader_t *desc } out: - if (!(xprt->tcp_flags & XPRT_COPY_DATA)) { - dprintk("RPC: %4d received reply complete\n", - req->rq_task->tk_pid); - xprt_complete_rqst(xprt, req, xprt->tcp_copied); - } + if (!(xprt->tcp_flags & XPRT_COPY_DATA)) + xprt_complete_rqst(req->rq_task, xprt->tcp_copied); spin_unlock(&xprt->transport_lock); xs_tcp_check_recm(xprt); } -- GitLab From a58dd398f5db4f73d5c581069fd70a4304cc4f0a Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:53 -0700 Subject: [PATCH 0131/1519] [PATCH] RPC: add a release_rqst callout to the RPC transport switch The final place where congestion control state is adjusted is in xprt_release, where each request is finally released. Add a callout there to allow transports to perform additional processing when a request is about to be released. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 2 ++ net/sunrpc/xprt.c | 14 +++++++++++++- net/sunrpc/xprtsock.c | 1 + 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 2e48752d55d9..64e77658fa30 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -138,6 +138,7 @@ struct rpc_xprt_ops { int (*send_request)(struct rpc_task *task); void (*set_retrans_timeout)(struct rpc_task *task); void (*timer)(struct rpc_task *task); + void (*release_request)(struct rpc_task *task); void (*close)(struct rpc_xprt *xprt); void (*destroy)(struct rpc_xprt *xprt); }; @@ -262,6 +263,7 @@ void xprt_update_rtt(struct rpc_task *task); void xprt_adjust_cwnd(struct rpc_task *task, int result); struct rpc_rqst * xprt_lookup_rqst(struct rpc_xprt *xprt, u32 xid); void xprt_complete_rqst(struct rpc_task *task, int copied); +void xprt_release_rqst_cong(struct rpc_task *task); void xprt_disconnect(struct rpc_xprt *xprt); /* diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 707806fe1a23..e8d11bd6158e 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -289,6 +289,17 @@ __xprt_put_cong(struct rpc_xprt *xprt, struct rpc_rqst *req) __xprt_lock_write_next_cong(xprt); } +/** + * xprt_release_rqst_cong - housekeeping when request is complete + * @task: RPC request that recently completed + * + * Useful for transports that require congestion control. + */ +void xprt_release_rqst_cong(struct rpc_task *task) +{ + __xprt_put_cong(task->tk_xprt, task->tk_rqstp); +} + /** * xprt_adjust_cwnd - adjust transport congestion window * @task: recently completed RPC request used to adjust window @@ -823,7 +834,8 @@ void xprt_release(struct rpc_task *task) return; spin_lock_bh(&xprt->transport_lock); xprt->ops->release_xprt(xprt, task); - __xprt_put_cong(xprt, req); + if (xprt->ops->release_request) + xprt->ops->release_request(task); if (!list_empty(&req->rq_list)) list_del(&req->rq_list); xprt->last_used = jiffies; diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 980f26504f48..6c2f5dcea416 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1059,6 +1059,7 @@ static struct rpc_xprt_ops xs_udp_ops = { .send_request = xs_udp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_rtt, .timer = xs_udp_timer, + .release_request = xprt_release_rqst_cong, .close = xs_close, .destroy = xs_destroy, }; -- GitLab From ed63c003701a314c4893c11eceb9d68f8f46c662 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:53 -0700 Subject: [PATCH 0132/1519] [PATCH] RPC: remove xprt->nocong Get rid of the "xprt->nocong" variable. Test-plan: Use WAN simulation to cause sporadic bursty packet loss with UDP mounts. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/lockd/host.c | 1 - include/linux/sunrpc/xprt.h | 1 - net/sunrpc/xprtsock.c | 2 -- 3 files changed, 4 deletions(-) diff --git a/fs/lockd/host.c b/fs/lockd/host.c index 7901f5b8092c..c4c8601096e0 100644 --- a/fs/lockd/host.c +++ b/fs/lockd/host.c @@ -188,7 +188,6 @@ nlm_bind_host(struct nlm_host *host) goto forgetit; xprt_set_timeout(&xprt->timeout, 5, nlmsvc_timeout); - xprt->nocong = 1; /* No congestion control for NLM */ xprt->resvport = 1; /* NLM requires a reserved port */ /* Existing NLM servers accept AUTH_UNIX only */ diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 64e77658fa30..559fb471f6f2 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -172,7 +172,6 @@ struct rpc_xprt { unsigned int max_reqs; /* total slots */ unsigned long state; /* transport state */ unsigned char shutdown : 1, /* being shut down */ - nocong : 1, /* no congestion control */ resvport : 1; /* use a reserved port */ /* diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 6c2f5dcea416..7e5e020fe78d 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1100,7 +1100,6 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->prot = IPPROTO_UDP; xprt->port = XS_MAX_RESVPORT; xprt->tsh_size = 0; - xprt->nocong = 0; xprt->cwnd = RPC_INITCWND; xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; /* XXX: header size can vary due to auth type, IPv6, etc. */ @@ -1140,7 +1139,6 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->prot = IPPROTO_TCP; xprt->port = XS_MAX_RESVPORT; xprt->tsh_size = sizeof(rpc_fraghdr) / sizeof(u32); - xprt->nocong = 1; xprt->cwnd = RPC_MAXCWND(xprt); xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; xprt->max_payload = RPC_MAX_FRAGMENT_SIZE; -- GitLab From 555ee3af161b037865793bd4bebc06b58daafde6 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:54 -0700 Subject: [PATCH 0133/1519] [PATCH] RPC: clean up after nocong was removed Clean-up: Move some macros that are specific to the Van Jacobson implementation into xprt.c. Get rid of the cong_wait field in rpc_xprt, which is no longer used. Get rid of xprt_clear_backlog. Test-plan: Compile with CONFIG_NFS enabled. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 22 ---------------------- net/sunrpc/xprt.c | 29 +++++++++++++++++++---------- net/sunrpc/xprtsock.c | 2 -- 3 files changed, 19 insertions(+), 34 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 559fb471f6f2..dcf0326bda01 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -15,20 +15,6 @@ #include #include -/* - * The transport code maintains an estimate on the maximum number of out- - * standing RPC requests, using a smoothed version of the congestion - * avoidance implemented in 44BSD. This is basically the Van Jacobson - * congestion algorithm: If a retransmit occurs, the congestion window is - * halved; otherwise, it is incremented by 1/cwnd when - * - * - a reply is received and - * - a full number of requests are outstanding and - * - the congestion window hasn't been updated recently. - * - * Upper procedures may check whether a request would block waiting for - * a free RPC slot by using the RPC_CONGESTED() macro. - */ extern unsigned int xprt_udp_slot_table_entries; extern unsigned int xprt_tcp_slot_table_entries; @@ -36,12 +22,6 @@ extern unsigned int xprt_tcp_slot_table_entries; #define RPC_DEF_SLOT_TABLE (16U) #define RPC_MAX_SLOT_TABLE (128U) -#define RPC_CWNDSHIFT (8U) -#define RPC_CWNDSCALE (1U << RPC_CWNDSHIFT) -#define RPC_INITCWND RPC_CWNDSCALE -#define RPC_MAXCWND(xprt) ((xprt)->max_reqs << RPC_CWNDSHIFT) -#define RPCXPRT_CONGESTED(xprt) ((xprt)->cong >= (xprt)->cwnd) - /* Default timeout values */ #define RPC_MAX_UDP_TIMEOUT (60*HZ) #define RPC_MAX_TCP_TIMEOUT (600*HZ) @@ -213,8 +193,6 @@ struct rpc_xprt { void (*old_data_ready)(struct sock *, int); void (*old_state_change)(struct sock *); void (*old_write_space)(struct sock *); - - wait_queue_head_t cong_wait; }; #define XPRT_LAST_FRAG (1 << 0) diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index e8d11bd6158e..0458319a1bdd 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -62,7 +62,23 @@ static inline void do_xprt_reserve(struct rpc_task *); static void xprt_connect_status(struct rpc_task *task); static int __xprt_get_cong(struct rpc_xprt *, struct rpc_task *); -static int xprt_clear_backlog(struct rpc_xprt *xprt); +/* + * The transport code maintains an estimate on the maximum number of out- + * standing RPC requests, using a smoothed version of the congestion + * avoidance implemented in 44BSD. This is basically the Van Jacobson + * congestion algorithm: If a retransmit occurs, the congestion window is + * halved; otherwise, it is incremented by 1/cwnd when + * + * - a reply is received and + * - a full number of requests are outstanding and + * - the congestion window hasn't been updated recently. + */ +#define RPC_CWNDSHIFT (8U) +#define RPC_CWNDSCALE (1U << RPC_CWNDSHIFT) +#define RPC_INITCWND RPC_CWNDSCALE +#define RPC_MAXCWND(xprt) ((xprt)->max_reqs << RPC_CWNDSHIFT) + +#define RPCXPRT_CONGESTED(xprt) ((xprt)->cong >= (xprt)->cwnd) /** * xprt_reserve_xprt - serialize write access to transports @@ -850,7 +866,7 @@ void xprt_release(struct rpc_task *task) spin_lock(&xprt->reserve_lock); list_add(&req->rq_list, &xprt->free); - xprt_clear_backlog(xprt); + rpc_wake_up_next(&xprt->backlog); spin_unlock(&xprt->reserve_lock); } @@ -902,7 +918,6 @@ static struct rpc_xprt *xprt_setup(int proto, struct sockaddr_in *ap, struct rpc spin_lock_init(&xprt->transport_lock); spin_lock_init(&xprt->reserve_lock); - init_waitqueue_head(&xprt->cong_wait); INIT_LIST_HEAD(&xprt->free); INIT_LIST_HEAD(&xprt->recv); @@ -911,6 +926,7 @@ static struct rpc_xprt *xprt_setup(int proto, struct sockaddr_in *ap, struct rpc xprt->timer.function = xprt_init_autodisconnect; xprt->timer.data = (unsigned long) xprt; xprt->last_used = jiffies; + xprt->cwnd = RPC_INITCWND; rpc_init_wait_queue(&xprt->pending, "xprt_pending"); rpc_init_wait_queue(&xprt->sending, "xprt_sending"); @@ -955,16 +971,9 @@ static void xprt_shutdown(struct rpc_xprt *xprt) rpc_wake_up(&xprt->resend); xprt_wake_pending_tasks(xprt, -EIO); rpc_wake_up(&xprt->backlog); - wake_up(&xprt->cong_wait); del_timer_sync(&xprt->timer); } -static int xprt_clear_backlog(struct rpc_xprt *xprt) { - rpc_wake_up_next(&xprt->backlog); - wake_up(&xprt->cong_wait); - return 1; -} - /** * xprt_destroy - destroy an RPC transport, killing off all requests. * @xprt: transport to destroy diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 7e5e020fe78d..26402c063f00 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1100,7 +1100,6 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->prot = IPPROTO_UDP; xprt->port = XS_MAX_RESVPORT; xprt->tsh_size = 0; - xprt->cwnd = RPC_INITCWND; xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; /* XXX: header size can vary due to auth type, IPv6, etc. */ xprt->max_payload = (1U << 16) - (MAX_HEADER << 3); @@ -1139,7 +1138,6 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->prot = IPPROTO_TCP; xprt->port = XS_MAX_RESVPORT; xprt->tsh_size = sizeof(rpc_fraghdr) / sizeof(u32); - xprt->cwnd = RPC_MAXCWND(xprt); xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; xprt->max_payload = RPC_MAX_FRAGMENT_SIZE; -- GitLab From 529b33c6db0120126b1381faa51406dc463acdc9 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:54 -0700 Subject: [PATCH 0134/1519] [PATCH] RPC: allow RPC client's port range to be adjustable Select an RPC client source port between 650 and 1023 instead of between 1 and 800. The old range conflicts with a number of network services. Provide sysctls to allow admins to select a different port range. Note that this doesn't affect user-level RPC library behavior, which still uses 1 to 800. Based on a suggestion by Olaf Kirch . Test-plan: Repeated mount and unmount. Destructive testing. Idle timeouts. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/debug.h | 2 ++ include/linux/sunrpc/xprt.h | 17 ++++++++++++++--- net/sunrpc/sysctl.c | 29 +++++++++++++++++++++++++++++ net/sunrpc/xprtsock.c | 23 ++++++++--------------- 4 files changed, 53 insertions(+), 18 deletions(-) diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h index 42d299747956..1a42d902bc11 100644 --- a/include/linux/sunrpc/debug.h +++ b/include/linux/sunrpc/debug.h @@ -95,6 +95,8 @@ enum { CTL_NLMDEBUG, CTL_SLOTTABLE_UDP, CTL_SLOTTABLE_TCP, + CTL_MIN_RESVPORT, + CTL_MAX_RESVPORT, }; #endif /* _LINUX_SUNRPC_DEBUG_H_ */ diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index dcf0326bda01..9d9266cf8a36 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -51,6 +51,17 @@ extern unsigned int xprt_tcp_slot_table_entries; #define RPC_CALLHDRSIZE 6 #define RPC_REPHDRSIZE 4 +/* + * Parameters for choosing a free port + */ +extern unsigned int xprt_min_resvport; +extern unsigned int xprt_max_resvport; + +#define RPC_MIN_RESVPORT (1U) +#define RPC_MAX_RESVPORT (65535U) +#define RPC_DEF_MIN_RESVPORT (650U) +#define RPC_DEF_MAX_RESVPORT (1023U) + /* * This describes a timeout strategy */ @@ -62,6 +73,9 @@ struct rpc_timeout { unsigned char to_exponential; }; +struct rpc_task; +struct rpc_xprt; + /* * This describes a complete RPC request */ @@ -107,9 +121,6 @@ struct rpc_rqst { #define rq_svec rq_snd_buf.head #define rq_slen rq_snd_buf.len -struct rpc_task; -struct rpc_xprt; - struct rpc_xprt_ops { void (*set_buffer_size)(struct rpc_xprt *xprt); int (*reserve_xprt)(struct rpc_task *task); diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c index ef483262f17f..d0c9f460e411 100644 --- a/net/sunrpc/sysctl.c +++ b/net/sunrpc/sysctl.c @@ -121,9 +121,16 @@ proc_dodebug(ctl_table *table, int write, struct file *file, unsigned int xprt_udp_slot_table_entries = RPC_DEF_SLOT_TABLE; unsigned int xprt_tcp_slot_table_entries = RPC_DEF_SLOT_TABLE; +unsigned int xprt_min_resvport = RPC_DEF_MIN_RESVPORT; +EXPORT_SYMBOL(xprt_min_resvport); +unsigned int xprt_max_resvport = RPC_DEF_MAX_RESVPORT; +EXPORT_SYMBOL(xprt_max_resvport); + static unsigned int min_slot_table_size = RPC_MIN_SLOT_TABLE; static unsigned int max_slot_table_size = RPC_MAX_SLOT_TABLE; +static unsigned int xprt_min_resvport_limit = RPC_MIN_RESVPORT; +static unsigned int xprt_max_resvport_limit = RPC_MAX_RESVPORT; static ctl_table debug_table[] = { { @@ -180,6 +187,28 @@ static ctl_table debug_table[] = { .extra1 = &min_slot_table_size, .extra2 = &max_slot_table_size }, + { + .ctl_name = CTL_MIN_RESVPORT, + .procname = "min_resvport", + .data = &xprt_min_resvport, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xprt_min_resvport_limit, + .extra2 = &xprt_max_resvport_limit + }, + { + .ctl_name = CTL_MAX_RESVPORT, + .procname = "max_resvport", + .data = &xprt_max_resvport, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xprt_min_resvport_limit, + .extra2 = &xprt_max_resvport_limit + }, { .ctl_name = 0 } }; diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 26402c063f00..62c2e7caa345 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -35,11 +35,6 @@ #include #include -/* - * Maximum port number to use when requesting a reserved port. - */ -#define XS_MAX_RESVPORT (800U) - /* * How many times to try sending a request on a socket before waiting * for the socket buffer to clear. @@ -873,10 +868,9 @@ static int xs_bindresvport(struct rpc_xprt *xprt, struct socket *sock) struct sockaddr_in myaddr = { .sin_family = AF_INET, }; - int err, port; + int err; + unsigned short port = xprt->port; - /* Were we already bound to a given port? Try to reuse it */ - port = xprt->port; do { myaddr.sin_port = htons(port); err = sock->ops->bind(sock, (struct sockaddr *) &myaddr, @@ -887,8 +881,10 @@ static int xs_bindresvport(struct rpc_xprt *xprt, struct socket *sock) port); return 0; } - if (--port == 0) - port = XS_MAX_RESVPORT; + if (port <= xprt_min_resvport) + port = xprt_max_resvport; + else + port--; } while (err == -EADDRINUSE && port != xprt->port); dprintk("RPC: can't bind to reserved port (%d).\n", -err); @@ -1075,9 +1071,6 @@ static struct rpc_xprt_ops xs_tcp_ops = { .destroy = xs_destroy, }; -extern unsigned int xprt_udp_slot_table_entries; -extern unsigned int xprt_tcp_slot_table_entries; - /** * xs_setup_udp - Set up transport to use a UDP socket * @xprt: transport to set up @@ -1098,7 +1091,7 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) memset(xprt->slot, 0, slot_table_size); xprt->prot = IPPROTO_UDP; - xprt->port = XS_MAX_RESVPORT; + xprt->port = xprt_max_resvport; xprt->tsh_size = 0; xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; /* XXX: header size can vary due to auth type, IPv6, etc. */ @@ -1136,7 +1129,7 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) memset(xprt->slot, 0, slot_table_size); xprt->prot = IPPROTO_TCP; - xprt->port = XS_MAX_RESVPORT; + xprt->port = xprt_max_resvport; xprt->tsh_size = sizeof(rpc_fraghdr) / sizeof(u32); xprt->resvport = capable(CAP_NET_BIND_SERVICE) ? 1 : 0; xprt->max_payload = RPC_MAX_FRAGMENT_SIZE; -- GitLab From 3167e12c0c424f3c323944701615343022d86418 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:55 -0700 Subject: [PATCH 0135/1519] [PATCH] RPC: make sure to get the same local port number when reconnecting Implement a best practice: if the remote end drops our connection, try to reconnect using the same port number. This is important because the NFS server's Duplicate Reply Cache often hashes on the source port number. If the client reuses the port number when it reconnects, the server's DRC will be more effective. Based on suggestions by Mike Eisler, Olaf Kirch, and Alexey Kuznetsky. Test-plan: Destructive testing. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/xprtsock.c | 65 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 53 insertions(+), 12 deletions(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 62c2e7caa345..88ac71fcd335 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -362,6 +362,8 @@ static int xs_tcp_send_request(struct rpc_task *task) * xs_close - close a socket * @xprt: transport * + * This is used when all requests are complete; ie, no DRC state remains + * on the server we want to save. */ static void xs_close(struct rpc_xprt *xprt) { @@ -949,6 +951,30 @@ static void xs_udp_connect_worker(void *args) xprt_clear_connecting(xprt); } +/* + * We need to preserve the port number so the reply cache on the server can + * find our cached RPC replies when we get around to reconnecting. + */ +static void xs_tcp_reuse_connection(struct rpc_xprt *xprt) +{ + int result; + struct socket *sock = xprt->sock; + struct sockaddr any; + + dprintk("RPC: disconnecting xprt %p to reuse port\n", xprt); + + /* + * Disconnect the transport socket by doing a connect operation + * with AF_UNSPEC. This should return immediately... + */ + memset(&any, 0, sizeof(any)); + any.sa_family = AF_UNSPEC; + result = sock->ops->connect(sock, &any, sizeof(any), 0); + if (result) + dprintk("RPC: AF_UNSPEC connect return code %d\n", + result); +} + /** * xs_tcp_connect_worker - connect a TCP socket to a remote endpoint * @args: RPC transport to connect @@ -966,18 +992,20 @@ static void xs_tcp_connect_worker(void *args) dprintk("RPC: xs_tcp_connect_worker for xprt %p\n", xprt); - /* Start by resetting any existing socket state */ - xs_close(xprt); - - if ((err = sock_create_kern(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock)) < 0) { - dprintk("RPC: can't create TCP transport socket (%d).\n", -err); - goto out; - } + if (!xprt->sock) { + /* start from scratch */ + if ((err = sock_create_kern(PF_INET, SOCK_STREAM, IPPROTO_TCP, &sock)) < 0) { + dprintk("RPC: can't create TCP transport socket (%d).\n", -err); + goto out; + } - if (xprt->resvport && xs_bindresvport(xprt, sock) < 0) { - sock_release(sock); - goto out; - } + if (xprt->resvport && xs_bindresvport(xprt, sock) < 0) { + sock_release(sock); + goto out; + } + } else + /* "close" the socket, preserving the local port */ + xs_tcp_reuse_connection(xprt); if (!xprt->inet) { struct sock *sk = sock->sk; @@ -991,7 +1019,12 @@ static void xs_tcp_connect_worker(void *args) sk->sk_data_ready = xs_tcp_data_ready; sk->sk_state_change = xs_tcp_state_change; sk->sk_write_space = xs_tcp_write_space; - tcp_sk(sk)->nonagle = 1; + + /* socket options */ + sk->sk_userlocks |= SOCK_BINDPORT_LOCK; + sock_reset_flag(sk, SOCK_LINGER); + tcp_sk(sk)->linger2 = 0; + tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF; xprt_clear_connected(xprt); @@ -1012,6 +1045,14 @@ static void xs_tcp_connect_worker(void *args) case -EINPROGRESS: case -EALREADY: goto out_clear; + case -ECONNREFUSED: + case -ECONNRESET: + /* retry with existing socket, after a delay */ + break; + default: + /* get rid of existing socket, and retry */ + xs_close(xprt); + break; } } out: -- GitLab From 03bf4b707eee06706c9db343dd5c905b7ee47ed2 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:55 -0700 Subject: [PATCH 0136/1519] [PATCH] RPC: parametrize various transport connect timeouts Each transport implementation can now set unique bind, connect, reestablishment, and idle timeout values. These are variables, allowing the values to be modified dynamically. This permits exponential backoff of any of these values, for instance. As an example, we implement exponential backoff for the connection reestablishment timeout. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 10 +++--- include/linux/nfs_fs.h | 4 +++ include/linux/sunrpc/xprt.h | 29 ++++------------ net/sunrpc/clnt.c | 2 +- net/sunrpc/xprt.c | 5 ++- net/sunrpc/xprtsock.c | 68 +++++++++++++++++++++++++++++++++++-- 6 files changed, 84 insertions(+), 34 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index b6a1ca508e60..062911e7ceb5 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -369,8 +369,8 @@ static void nfs_init_timeout_values(struct rpc_timeout *to, int proto, unsigned case IPPROTO_TCP: if (!to->to_initval) to->to_initval = 60 * HZ; - if (to->to_initval > RPC_MAX_TCP_TIMEOUT) - to->to_initval = RPC_MAX_TCP_TIMEOUT; + if (to->to_initval > NFS_MAX_TCP_TIMEOUT) + to->to_initval = NFS_MAX_TCP_TIMEOUT; to->to_increment = to->to_initval; to->to_maxval = to->to_initval + (to->to_increment * to->to_retries); to->to_exponential = 0; @@ -379,9 +379,9 @@ static void nfs_init_timeout_values(struct rpc_timeout *to, int proto, unsigned default: if (!to->to_initval) to->to_initval = 11 * HZ / 10; - if (to->to_initval > RPC_MAX_UDP_TIMEOUT) - to->to_initval = RPC_MAX_UDP_TIMEOUT; - to->to_maxval = RPC_MAX_UDP_TIMEOUT; + if (to->to_initval > NFS_MAX_UDP_TIMEOUT) + to->to_initval = NFS_MAX_UDP_TIMEOUT; + to->to_maxval = NFS_MAX_UDP_TIMEOUT; to->to_exponential = 1; break; } diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 9a6047ff1b25..7bac2785c6e4 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -41,6 +41,10 @@ #define NFS_MAX_FILE_IO_BUFFER_SIZE 32768 #define NFS_DEF_FILE_IO_BUFFER_SIZE 4096 +/* Default timeout values */ +#define NFS_MAX_UDP_TIMEOUT (60*HZ) +#define NFS_MAX_TCP_TIMEOUT (600*HZ) + /* * superblock magic number for NFS */ diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 9d9266cf8a36..2543adf18551 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -22,28 +22,6 @@ extern unsigned int xprt_tcp_slot_table_entries; #define RPC_DEF_SLOT_TABLE (16U) #define RPC_MAX_SLOT_TABLE (128U) -/* Default timeout values */ -#define RPC_MAX_UDP_TIMEOUT (60*HZ) -#define RPC_MAX_TCP_TIMEOUT (600*HZ) - -/* - * Wait duration for an RPC TCP connection to be established. Solaris - * NFS over TCP uses 60 seconds, for example, which is in line with how - * long a server takes to reboot. - */ -#define RPC_CONNECT_TIMEOUT (60*HZ) - -/* - * Delay an arbitrary number of seconds before attempting to reconnect - * after an error. - */ -#define RPC_REESTABLISH_TIMEOUT (15*HZ) - -/* - * RPC transport idle timeout. - */ -#define RPC_IDLE_DISCONNECT_TIMEOUT (5*60*HZ) - /* * RPC call and reply header size as number of 32bit words (verifier * size computed separately) @@ -182,14 +160,19 @@ struct rpc_xprt { /* * Connection of transports */ + unsigned long connect_timeout, + bind_timeout, + reestablish_timeout; struct work_struct connect_worker; unsigned short port; + /* * Disconnection of idle transports */ struct work_struct task_cleanup; struct timer_list timer; - unsigned long last_used; + unsigned long last_used, + idle_timeout; /* * Send stuff diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index cc1b773a79d3..24b44e73f391 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -740,7 +740,7 @@ call_bind(struct rpc_task *task) task->tk_action = call_connect; if (!clnt->cl_port) { task->tk_action = call_bind_status; - task->tk_timeout = RPC_CONNECT_TIMEOUT; + task->tk_timeout = task->tk_xprt->bind_timeout; rpc_getport(task, clnt); } } diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 0458319a1bdd..215be0d0ef6b 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -551,7 +551,7 @@ void xprt_connect(struct rpc_task *task) if (task->tk_rqstp) task->tk_rqstp->rq_bytes_sent = 0; - task->tk_timeout = RPC_CONNECT_TIMEOUT; + task->tk_timeout = xprt->connect_timeout; rpc_sleep_on(&xprt->pending, task, xprt_connect_status, NULL); xprt->ops->connect(task); } @@ -763,7 +763,6 @@ void xprt_transmit(struct rpc_task *task) switch (status) { case -ECONNREFUSED: - task->tk_timeout = RPC_REESTABLISH_TIMEOUT; rpc_sleep_on(&xprt->sending, task, NULL, NULL); case -EAGAIN: case -ENOTCONN: @@ -857,7 +856,7 @@ void xprt_release(struct rpc_task *task) xprt->last_used = jiffies; if (list_empty(&xprt->recv) && !xprt->shutdown) mod_timer(&xprt->timer, - xprt->last_used + RPC_IDLE_DISCONNECT_TIMEOUT); + xprt->last_used + xprt->idle_timeout); spin_unlock_bh(&xprt->transport_lock); task->tk_rqstp = NULL; memset(req, 0, sizeof(*req)); /* mark unused */ diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 88ac71fcd335..06c2d95484e0 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -41,6 +41,50 @@ */ #define XS_SENDMSG_RETRY (10U) +/* + * Time out for an RPC UDP socket connect. UDP socket connects are + * synchronous, but we set a timeout anyway in case of resource + * exhaustion on the local host. + */ +#define XS_UDP_CONN_TO (5U * HZ) + +/* + * Wait duration for an RPC TCP connection to be established. Solaris + * NFS over TCP uses 60 seconds, for example, which is in line with how + * long a server takes to reboot. + */ +#define XS_TCP_CONN_TO (60U * HZ) + +/* + * Wait duration for a reply from the RPC portmapper. + */ +#define XS_BIND_TO (60U * HZ) + +/* + * Delay if a UDP socket connect error occurs. This is most likely some + * kind of resource problem on the local host. + */ +#define XS_UDP_REEST_TO (2U * HZ) + +/* + * The reestablish timeout allows clients to delay for a bit before attempting + * to reconnect to a server that just dropped our connection. + * + * We implement an exponential backoff when trying to reestablish a TCP + * transport connection with the server. Some servers like to drop a TCP + * connection when they are overworked, so we start with a short timeout and + * increase over time if the server is down or not responding. + */ +#define XS_TCP_INIT_REEST_TO (3U * HZ) +#define XS_TCP_MAX_REEST_TO (5U * 60 * HZ) + +/* + * TCP idle timeout; client drops the transport socket if it is idle + * for this long. Note that we also timeout UDP sockets to prevent + * holding port numbers when there is no RPC traffic. + */ +#define XS_IDLE_DISC_TO (5U * 60 * HZ) + #ifdef RPC_DEBUG # undef RPC_DEBUG_DATA # define RPCDBG_FACILITY RPCDBG_TRANS @@ -739,6 +783,7 @@ static void xs_tcp_state_change(struct sock *sk) xprt->tcp_reclen = 0; xprt->tcp_copied = 0; xprt->tcp_flags = XPRT_COPY_RECM | XPRT_COPY_XID; + xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO; xprt_wake_pending_tasks(xprt, 0); } spin_unlock_bh(&xprt->transport_lock); @@ -1066,6 +1111,13 @@ static void xs_tcp_connect_worker(void *args) * @task: address of RPC task that manages state of connect request * * TCP: If the remote end dropped the connection, delay reconnecting. + * + * UDP socket connects are synchronous, but we use a work queue anyway + * to guarantee that even unprivileged user processes can set up a + * socket on a privileged port. + * + * If a UDP socket connect fails, the delay behavior here prevents + * retry floods (hard mounts). */ static void xs_connect(struct rpc_task *task) { @@ -1075,9 +1127,13 @@ static void xs_connect(struct rpc_task *task) return; if (xprt->sock != NULL) { - dprintk("RPC: xs_connect delayed xprt %p\n", xprt); + dprintk("RPC: xs_connect delayed xprt %p for %lu seconds\n", + xprt, xprt->reestablish_timeout / HZ); schedule_delayed_work(&xprt->connect_worker, - RPC_REESTABLISH_TIMEOUT); + xprt->reestablish_timeout); + xprt->reestablish_timeout <<= 1; + if (xprt->reestablish_timeout > XS_TCP_MAX_REEST_TO) + xprt->reestablish_timeout = XS_TCP_MAX_REEST_TO; } else { dprintk("RPC: xs_connect scheduled xprt %p\n", xprt); schedule_work(&xprt->connect_worker); @@ -1139,6 +1195,10 @@ int xs_setup_udp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->max_payload = (1U << 16) - (MAX_HEADER << 3); INIT_WORK(&xprt->connect_worker, xs_udp_connect_worker, xprt); + xprt->bind_timeout = XS_BIND_TO; + xprt->connect_timeout = XS_UDP_CONN_TO; + xprt->reestablish_timeout = XS_UDP_REEST_TO; + xprt->idle_timeout = XS_IDLE_DISC_TO; xprt->ops = &xs_udp_ops; @@ -1176,6 +1236,10 @@ int xs_setup_tcp(struct rpc_xprt *xprt, struct rpc_timeout *to) xprt->max_payload = RPC_MAX_FRAGMENT_SIZE; INIT_WORK(&xprt->connect_worker, xs_tcp_connect_worker, xprt); + xprt->bind_timeout = XS_BIND_TO; + xprt->connect_timeout = XS_TCP_CONN_TO; + xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO; + xprt->idle_timeout = XS_IDLE_DISC_TO; xprt->ops = &xs_tcp_ops; -- GitLab From 470056c288334eb0b37be26c9ff8aee37ed1cc7a Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 25 Aug 2005 16:25:56 -0700 Subject: [PATCH 0137/1519] [PATCH] RPC: rationalize set_buffer_size In fact, ->set_buffer_size should be completely functionless for non-UDP. Test-plan: Check socket buffer size on UDP sockets over time. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 4 ++-- net/sunrpc/clnt.c | 10 ++-------- net/sunrpc/xprtsock.c | 30 +++++++++++++++--------------- 3 files changed, 19 insertions(+), 25 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 2543adf18551..99cad3ead81d 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -100,7 +100,7 @@ struct rpc_rqst { #define rq_slen rq_snd_buf.len struct rpc_xprt_ops { - void (*set_buffer_size)(struct rpc_xprt *xprt); + void (*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize); int (*reserve_xprt)(struct rpc_task *task); void (*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task); void (*connect)(struct rpc_task *task); @@ -124,7 +124,7 @@ struct rpc_xprt { unsigned long cong; /* current congestion */ unsigned long cwnd; /* congestion window */ - unsigned int rcvsize, /* transport rcv buffer size */ + size_t rcvsize, /* transport rcv buffer size */ sndsize; /* transport send buffer size */ size_t max_payload; /* largest RPC payload size, diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 24b44e73f391..5a8f01d726e9 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -517,14 +517,8 @@ void rpc_setbufsize(struct rpc_clnt *clnt, unsigned int sndsize, unsigned int rcvsize) { struct rpc_xprt *xprt = clnt->cl_xprt; - - xprt->sndsize = 0; - if (sndsize) - xprt->sndsize = sndsize + RPC_SLACK_SPACE; - xprt->rcvsize = 0; - if (rcvsize) - xprt->rcvsize = rcvsize + RPC_SLACK_SPACE; - xprt->ops->set_buffer_size(xprt); + if (xprt->ops->set_buffer_size) + xprt->ops->set_buffer_size(xprt, sndsize, rcvsize); } /* diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 06c2d95484e0..2e1529217e65 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -865,15 +865,7 @@ static void xs_tcp_write_space(struct sock *sk) read_unlock(&sk->sk_callback_lock); } -/** - * xs_udp_set_buffer_size - set send and receive limits - * @xprt: generic transport - * - * Set socket send and receive limits based on the - * sndsize and rcvsize fields in the generic transport - * structure. - */ -static void xs_udp_set_buffer_size(struct rpc_xprt *xprt) +static void xs_udp_do_set_buffer_size(struct rpc_xprt *xprt) { struct sock *sk = xprt->inet; @@ -889,14 +881,23 @@ static void xs_udp_set_buffer_size(struct rpc_xprt *xprt) } /** - * xs_tcp_set_buffer_size - set send and receive limits + * xs_udp_set_buffer_size - set send and receive limits * @xprt: generic transport + * @sndsize: requested size of send buffer, in bytes + * @rcvsize: requested size of receive buffer, in bytes * - * Nothing to do for TCP. + * Set socket send and receive buffer size limits. */ -static void xs_tcp_set_buffer_size(struct rpc_xprt *xprt) +static void xs_udp_set_buffer_size(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize) { - return; + xprt->sndsize = 0; + if (sndsize) + xprt->sndsize = sndsize + 1024; + xprt->rcvsize = 0; + if (rcvsize) + xprt->rcvsize = rcvsize + 1024; + + xs_udp_do_set_buffer_size(xprt); } /** @@ -989,7 +990,7 @@ static void xs_udp_connect_worker(void *args) write_unlock_bh(&sk->sk_callback_lock); } - xs_udp_set_buffer_size(xprt); + xs_udp_do_set_buffer_size(xprt); status = 0; out: xprt_wake_pending_tasks(xprt, status); @@ -1158,7 +1159,6 @@ static struct rpc_xprt_ops xs_udp_ops = { }; static struct rpc_xprt_ops xs_tcp_ops = { - .set_buffer_size = xs_tcp_set_buffer_size, .reserve_xprt = xprt_reserve_xprt, .release_xprt = xprt_release_xprt, .connect = xs_connect, -- GitLab From 278c995c8a153bb2a9bc427e931cfb9c8034c9d7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 24 Jul 2005 23:53:01 +0100 Subject: [PATCH 0138/1519] [PATCH] RPC,NFS: new rpc_pipefs patch Currently rpc_mkdir/rpc_rmdir and rpc_mkpipe/mk_unlink have an API that's a little unfortunate. They take a path relative to the rpc_pipefs root and thus need to perform a full lookup. If you look at debugfs or usbfs they always store the dentry for directories they created and thus can pass in a dentry + single pathname component pair into their equivalents of the above functions. And in fact rpc_pipefs actually stores a dentry for all but one component so this change not only simplifies the core rpc_pipe code but also the callers. Unfortuntately this code path is only used by the NFS4 idmapper and AUTH_GSSAPI for which I don't have a test enviroment. Could someone give it a spin? It's the last bit needed before we can rework the lookup_hash API Signed-off-by: Christoph Hellwig Signed-off-by: Trond Myklebust --- fs/nfs/idmap.c | 10 +- include/linux/sunrpc/clnt.h | 2 +- include/linux/sunrpc/rpc_pipe_fs.h | 9 +- net/sunrpc/auth_gss/auth_gss.c | 9 +- net/sunrpc/clnt.c | 53 ++++-- net/sunrpc/rpc_pipe.c | 268 ++++++++++------------------- 6 files changed, 142 insertions(+), 209 deletions(-) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index ffb8df91dc34..1d0a5bf0d264 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -66,7 +66,6 @@ struct idmap_hashtable { }; struct idmap { - char idmap_path[48]; struct dentry *idmap_dentry; wait_queue_head_t idmap_wq; struct idmap_msg idmap_im; @@ -102,11 +101,8 @@ nfs_idmap_new(struct nfs4_client *clp) memset(idmap, 0, sizeof(*idmap)); - snprintf(idmap->idmap_path, sizeof(idmap->idmap_path), - "%s/idmap", clp->cl_rpcclient->cl_pathname); - - idmap->idmap_dentry = rpc_mkpipe(idmap->idmap_path, - idmap, &idmap_upcall_ops, 0); + idmap->idmap_dentry = rpc_mkpipe(clp->cl_rpcclient->cl_dentry, + "idmap", idmap, &idmap_upcall_ops, 0); if (IS_ERR(idmap->idmap_dentry)) { kfree(idmap); return; @@ -128,7 +124,7 @@ nfs_idmap_delete(struct nfs4_client *clp) if (!idmap) return; - rpc_unlink(idmap->idmap_path); + rpc_unlink(idmap->idmap_dentry); clp->cl_idmap = NULL; kfree(idmap); } diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index ab151bbb66df..b5b51c196690 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -59,7 +59,7 @@ struct rpc_clnt { int cl_nodelen; /* nodename length */ char cl_nodename[UNX_MAXNODENAME]; - char cl_pathname[30];/* Path in rpc_pipe_fs */ + struct dentry * __cl_parent_dentry; struct dentry * cl_dentry; /* inode */ struct rpc_clnt * cl_parent; /* Points to parent of clones */ struct rpc_rtt cl_rtt_default; diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 63929349571f..63878d05c9a9 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -41,10 +41,11 @@ RPC_I(struct inode *inode) extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); -extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *); -extern int rpc_rmdir(char *); -extern struct dentry *rpc_mkpipe(char *, void *, struct rpc_pipe_ops *, int flags); -extern int rpc_unlink(char *); +extern struct dentry *rpc_mkdir(struct dentry *, char *, struct rpc_clnt *); +extern void rpc_rmdir(struct dentry *); +extern struct dentry *rpc_mkpipe(struct dentry *, char *, void *, + struct rpc_pipe_ops *, int flags); +extern void rpc_unlink(struct dentry *); #endif #endif diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index d2b08f16c257..bd2555139fa9 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -87,7 +87,6 @@ struct gss_auth { struct list_head upcalls; struct rpc_clnt *client; struct dentry *dentry; - char path[48]; spinlock_t lock; }; @@ -690,10 +689,8 @@ gss_create(struct rpc_clnt *clnt, rpc_authflavor_t flavor) if (err) goto err_put_mech; - snprintf(gss_auth->path, sizeof(gss_auth->path), "%s/%s", - clnt->cl_pathname, - gss_auth->mech->gm_name); - gss_auth->dentry = rpc_mkpipe(gss_auth->path, clnt, &gss_upcall_ops, RPC_PIPE_WAIT_FOR_OPEN); + gss_auth->dentry = rpc_mkpipe(clnt->cl_dentry, gss_auth->mech->gm_name, + clnt, &gss_upcall_ops, RPC_PIPE_WAIT_FOR_OPEN); if (IS_ERR(gss_auth->dentry)) { err = PTR_ERR(gss_auth->dentry); goto err_put_mech; @@ -718,7 +715,7 @@ gss_destroy(struct rpc_auth *auth) auth, auth->au_flavor); gss_auth = container_of(auth, struct gss_auth, rpc_auth); - rpc_unlink(gss_auth->path); + rpc_unlink(gss_auth->dentry); gss_mech_put(gss_auth->mech); rpcauth_free_credcache(auth); diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 5a8f01d726e9..63bf591310e0 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -67,26 +67,42 @@ static u32 * call_verify(struct rpc_task *task); static int rpc_setup_pipedir(struct rpc_clnt *clnt, char *dir_name) { - static uint32_t clntid; + static unsigned int clntid; + char name[128]; int error; if (dir_name == NULL) return 0; - for (;;) { - snprintf(clnt->cl_pathname, sizeof(clnt->cl_pathname), - "%s/clnt%x", dir_name, - (unsigned int)clntid++); - clnt->cl_pathname[sizeof(clnt->cl_pathname) - 1] = '\0'; - clnt->cl_dentry = rpc_mkdir(clnt->cl_pathname, clnt); - if (!IS_ERR(clnt->cl_dentry)) - return 0; + + retry_parent: + clnt->__cl_parent_dentry = rpc_mkdir(NULL, dir_name, NULL); + if (IS_ERR(clnt->__cl_parent_dentry)) { + error = PTR_ERR(clnt->__cl_parent_dentry); + if (error == -EEXIST) + goto retry_parent; /* XXX(hch): WTF? */ + + printk(KERN_INFO "RPC: Couldn't create pipefs entry %s, error %d\n", + dir_name, error); + return error; + } + + + retry_child: + snprintf(name, sizeof(name), "clnt%x", clntid++); + name[sizeof(name) - 1] = '\0'; + + clnt->cl_dentry = rpc_mkdir(clnt->__cl_parent_dentry, name, clnt); + if (IS_ERR(clnt->cl_dentry)) { error = PTR_ERR(clnt->cl_dentry); - if (error != -EEXIST) { - printk(KERN_INFO "RPC: Couldn't create pipefs entry %s, error %d\n", - clnt->cl_pathname, error); - return error; - } + if (error == -EEXIST) + goto retry_child; + printk(KERN_INFO "RPC: Couldn't create pipefs entry %s, error %d\n", + name, error); + rpc_rmdir(clnt->__cl_parent_dentry); + return error; } + + return 0; } /* @@ -174,7 +190,8 @@ rpc_new_client(struct rpc_xprt *xprt, char *servname, return clnt; out_no_auth: - rpc_rmdir(clnt->cl_pathname); + rpc_rmdir(clnt->cl_dentry); + rpc_rmdir(clnt->__cl_parent_dentry); out_no_path: if (clnt->cl_server != clnt->cl_inline_name) kfree(clnt->cl_server); @@ -302,8 +319,10 @@ rpc_destroy_client(struct rpc_clnt *clnt) rpc_destroy_client(clnt->cl_parent); goto out_free; } - if (clnt->cl_pathname[0]) - rpc_rmdir(clnt->cl_pathname); + if (clnt->cl_dentry) + rpc_rmdir(clnt->cl_dentry); + if (clnt->__cl_parent_dentry) + rpc_rmdir(clnt->__cl_parent_dentry); if (clnt->cl_xprt) { xprt_destroy(clnt->cl_xprt); clnt->cl_xprt = NULL; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index ded6c63f11ec..b382809726d8 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -414,38 +414,6 @@ rpc_put_mount(void) simple_release_fs(&rpc_mount, &rpc_mount_count); } -static int -rpc_lookup_parent(char *path, struct nameidata *nd) -{ - if (path[0] == '\0') - return -ENOENT; - if (rpc_get_mount()) { - printk(KERN_WARNING "%s: %s failed to mount " - "pseudofilesystem \n", __FILE__, __FUNCTION__); - return -ENODEV; - } - nd->mnt = mntget(rpc_mount); - nd->dentry = dget(rpc_mount->mnt_root); - nd->last_type = LAST_ROOT; - nd->flags = LOOKUP_PARENT; - nd->depth = 0; - - if (path_walk(path, nd)) { - printk(KERN_WARNING "%s: %s failed to find path %s\n", - __FILE__, __FUNCTION__, path); - rpc_put_mount(); - return -ENOENT; - } - return 0; -} - -static void -rpc_release_path(struct nameidata *nd) -{ - path_release(nd); - rpc_put_mount(); -} - static struct inode * rpc_get_inode(struct super_block *sb, int mode) { @@ -550,197 +518,149 @@ rpc_populate(struct dentry *parent, return -ENOMEM; } -static int -__rpc_mkdir(struct inode *dir, struct dentry *dentry) +struct dentry * +rpc_mkdir(struct dentry *parent, char *name, struct rpc_clnt *rpc_client) { + struct inode *dir; + struct dentry *dentry; struct inode *inode; - - inode = rpc_get_inode(dir->i_sb, S_IFDIR | S_IRUSR | S_IXUSR); - if (!inode) - goto out_err; - inode->i_ino = iunique(dir->i_sb, 100); - d_instantiate(dentry, inode); - dir->i_nlink++; - inode_dir_notify(dir, DN_CREATE); - rpc_get_mount(); - return 0; -out_err: - printk(KERN_WARNING "%s: %s failed to allocate inode for dentry %s\n", - __FILE__, __FUNCTION__, dentry->d_name.name); - return -ENOMEM; -} - -static int -__rpc_rmdir(struct inode *dir, struct dentry *dentry) -{ int error; - shrink_dcache_parent(dentry); - if (dentry->d_inode) { - rpc_close_pipes(dentry->d_inode); - rpc_inode_setowner(dentry->d_inode, NULL); - } - if ((error = simple_rmdir(dir, dentry)) != 0) - return error; - if (!error) { - inode_dir_notify(dir, DN_DELETE); - d_drop(dentry); - rpc_put_mount(); - } - return 0; -} + if (!parent) + parent = rpc_mount->mnt_root; -static struct dentry * -rpc_lookup_negative(char *path, struct nameidata *nd) -{ - struct dentry *dentry; - struct inode *dir; - int error; - - if ((error = rpc_lookup_parent(path, nd)) != 0) + dir = parent->d_inode; + + error = rpc_get_mount(); + if (error) return ERR_PTR(error); - dir = nd->dentry->d_inode; + down(&dir->i_sem); - dentry = lookup_hash(&nd->last, nd->dentry); + dentry = lookup_one_len(name, parent, strlen(name)); if (IS_ERR(dentry)) - goto out_err; + goto out_unlock; if (dentry->d_inode) { - dput(dentry); dentry = ERR_PTR(-EEXIST); - goto out_err; + goto out_dput; } - return dentry; -out_err: - up(&dir->i_sem); - rpc_release_path(nd); - return dentry; -} + inode = rpc_get_inode(dir->i_sb, S_IFDIR | S_IRUSR | S_IXUSR); + if (!inode) + goto out_dput; + inode->i_ino = iunique(dir->i_sb, 100); + dir->i_nlink++; + RPC_I(dentry->d_inode)->private = rpc_client; -struct dentry * -rpc_mkdir(char *path, struct rpc_clnt *rpc_client) -{ - struct nameidata nd; - struct dentry *dentry; - struct inode *dir; - int error; + d_instantiate(dentry, inode); + dget(dentry); + up(&dir->i_sem); + + inode_dir_notify(dir, DN_CREATE); - dentry = rpc_lookup_negative(path, &nd); - if (IS_ERR(dentry)) - return dentry; - dir = nd.dentry->d_inode; - if ((error = __rpc_mkdir(dir, dentry)) != 0) - goto err_dput; - RPC_I(dentry->d_inode)->private = rpc_client; error = rpc_populate(dentry, authfiles, RPCAUTH_info, RPCAUTH_EOF); if (error) - goto err_depopulate; -out: - up(&dir->i_sem); - rpc_release_path(&nd); + goto out_depopulate; + return dentry; -err_depopulate: - rpc_depopulate(dentry); - __rpc_rmdir(dir, dentry); -err_dput: + + out_depopulate: + rpc_rmdir(dentry); + out_dput: dput(dentry); - printk(KERN_WARNING "%s: %s() failed to create directory %s (errno = %d)\n", - __FILE__, __FUNCTION__, path, error); - dentry = ERR_PTR(error); - goto out; + out_unlock: + up(&dir->i_sem); + rpc_put_mount(); + return dentry; } -int -rpc_rmdir(char *path) +void +rpc_rmdir(struct dentry *dentry) { - struct nameidata nd; - struct dentry *dentry; - struct inode *dir; - int error; + struct dentry *parent = dentry->d_parent; - if ((error = rpc_lookup_parent(path, &nd)) != 0) - return error; - dir = nd.dentry->d_inode; - down(&dir->i_sem); - dentry = lookup_hash(&nd.last, nd.dentry); - if (IS_ERR(dentry)) { - error = PTR_ERR(dentry); - goto out_release; - } rpc_depopulate(dentry); - error = __rpc_rmdir(dir, dentry); - dput(dentry); -out_release: - up(&dir->i_sem); - rpc_release_path(&nd); - return error; + + down(&parent->d_inode->i_sem); + if (dentry->d_inode) { + rpc_close_pipes(dentry->d_inode); + rpc_inode_setowner(dentry->d_inode, NULL); + simple_rmdir(parent->d_inode, dentry); + } + up(&parent->d_inode->i_sem); + + inode_dir_notify(parent->d_inode, DN_DELETE); + rpc_put_mount(); } struct dentry * -rpc_mkpipe(char *path, void *private, struct rpc_pipe_ops *ops, int flags) +rpc_mkpipe(struct dentry *parent, char *name, void *private, + struct rpc_pipe_ops *ops, int flags) { - struct nameidata nd; + struct inode *dir = parent->d_inode; struct dentry *dentry; - struct inode *dir, *inode; + struct inode *inode; struct rpc_inode *rpci; + int error; + + error = rpc_get_mount(); + if (error) + return ERR_PTR(error); - dentry = rpc_lookup_negative(path, &nd); + down(&parent->d_inode->i_sem); + dentry = lookup_one_len(name, parent, strlen(name)); if (IS_ERR(dentry)) - return dentry; - dir = nd.dentry->d_inode; - inode = rpc_get_inode(dir->i_sb, S_IFSOCK | S_IRUSR | S_IWUSR); - if (!inode) - goto err_dput; + goto out_unlock; + if (dentry->d_inode) { + dentry = ERR_PTR(-EEXIST); + goto out_dput; + } + + inode = rpc_get_inode(parent->d_inode->i_sb, + S_IFSOCK | S_IRUSR | S_IWUSR); + if (!inode) { + dentry = ERR_PTR(-ENOMEM); + goto out_dput; + } + inode->i_ino = iunique(dir->i_sb, 100); inode->i_fop = &rpc_pipe_fops; - d_instantiate(dentry, inode); + rpci = RPC_I(inode); rpci->private = private; rpci->flags = flags; rpci->ops = ops; + + d_instantiate(dentry, inode); + dget(dentry); + up(&parent->d_inode->i_sem); + inode_dir_notify(dir, DN_CREATE); -out: - up(&dir->i_sem); - rpc_release_path(&nd); return dentry; -err_dput: + + out_dput: dput(dentry); - dentry = ERR_PTR(-ENOMEM); - printk(KERN_WARNING "%s: %s() failed to create pipe %s (errno = %d)\n", - __FILE__, __FUNCTION__, path, -ENOMEM); - goto out; + out_unlock: + up(&parent->d_inode->i_sem); + rpc_put_mount(); + return dentry; } -int -rpc_unlink(char *path) +void +rpc_unlink(struct dentry *dentry) { - struct nameidata nd; - struct dentry *dentry; - struct inode *dir; - int error; + struct dentry *parent = dentry->d_parent; - if ((error = rpc_lookup_parent(path, &nd)) != 0) - return error; - dir = nd.dentry->d_inode; - down(&dir->i_sem); - dentry = lookup_hash(&nd.last, nd.dentry); - if (IS_ERR(dentry)) { - error = PTR_ERR(dentry); - goto out_release; - } - d_drop(dentry); + down(&parent->d_inode->i_sem); if (dentry->d_inode) { rpc_close_pipes(dentry->d_inode); rpc_inode_setowner(dentry->d_inode, NULL); - error = simple_unlink(dir, dentry); + simple_unlink(parent->d_inode, dentry); } - dput(dentry); - inode_dir_notify(dir, DN_DELETE); -out_release: - up(&dir->i_sem); - rpc_release_path(&nd); - return error; + up(&parent->d_inode->i_sem); + + inode_dir_notify(parent->d_inode, DN_DELETE); + rpc_put_mount(); } /* -- GitLab From 3063d8a16643190f9e12e9c7e9f1ca56f7e7934e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 25 Aug 2005 16:25:57 -0700 Subject: [PATCH 0139/1519] NFS: Make /proc/mounts display the protocol used by NFSv4 Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 062911e7ceb5..358d8ef8c087 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -595,7 +595,6 @@ static int nfs_show_options(struct seq_file *m, struct vfsmount *mnt) { NFS_MOUNT_SOFT, ",soft", ",hard" }, { NFS_MOUNT_INTR, ",intr", "" }, { NFS_MOUNT_POSIX, ",posix", "" }, - { NFS_MOUNT_TCP, ",tcp", ",udp" }, { NFS_MOUNT_NOCTO, ",nocto", "" }, { NFS_MOUNT_NOAC, ",noac", "" }, { NFS_MOUNT_NONLM, ",nolock", ",lock" }, @@ -604,6 +603,8 @@ static int nfs_show_options(struct seq_file *m, struct vfsmount *mnt) }; struct proc_nfs_info *nfs_infop; struct nfs_server *nfss = NFS_SB(mnt->mnt_sb); + char buf[12]; + char *proto; seq_printf(m, ",v%d", nfss->rpc_ops->version); seq_printf(m, ",rsize=%d", nfss->rsize); @@ -622,6 +623,18 @@ static int nfs_show_options(struct seq_file *m, struct vfsmount *mnt) else seq_puts(m, nfs_infop->nostr); } + switch (nfss->client->cl_xprt->prot) { + case IPPROTO_TCP: + proto = "tcp"; + break; + case IPPROTO_UDP: + proto = "udp"; + break; + default: + snprintf(buf, sizeof(buf), "%u", nfss->client->cl_xprt->prot); + proto = buf; + } + seq_printf(m, ",proto=%s", proto); seq_puts(m, ",addr="); seq_escape(m, nfss->hostname, " \t\n\\"); return 0; -- GitLab From f134585a7343d71f9be7f0cf97e2145f21dd10c6 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 23 Sep 2005 11:08:25 -0400 Subject: [PATCH 0140/1519] Revert "[PATCH] RPC,NFS: new rpc_pipefs patch" This reverts 17f4e6febca160a9f9dd4bdece9784577a2f4524 commit. --- fs/nfs/idmap.c | 10 +- include/linux/sunrpc/clnt.h | 2 +- include/linux/sunrpc/rpc_pipe_fs.h | 9 +- net/sunrpc/auth_gss/auth_gss.c | 9 +- net/sunrpc/clnt.c | 53 ++---- net/sunrpc/rpc_pipe.c | 268 +++++++++++++++++++---------- 6 files changed, 209 insertions(+), 142 deletions(-) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index 1d0a5bf0d264..ffb8df91dc34 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -66,6 +66,7 @@ struct idmap_hashtable { }; struct idmap { + char idmap_path[48]; struct dentry *idmap_dentry; wait_queue_head_t idmap_wq; struct idmap_msg idmap_im; @@ -101,8 +102,11 @@ nfs_idmap_new(struct nfs4_client *clp) memset(idmap, 0, sizeof(*idmap)); - idmap->idmap_dentry = rpc_mkpipe(clp->cl_rpcclient->cl_dentry, - "idmap", idmap, &idmap_upcall_ops, 0); + snprintf(idmap->idmap_path, sizeof(idmap->idmap_path), + "%s/idmap", clp->cl_rpcclient->cl_pathname); + + idmap->idmap_dentry = rpc_mkpipe(idmap->idmap_path, + idmap, &idmap_upcall_ops, 0); if (IS_ERR(idmap->idmap_dentry)) { kfree(idmap); return; @@ -124,7 +128,7 @@ nfs_idmap_delete(struct nfs4_client *clp) if (!idmap) return; - rpc_unlink(idmap->idmap_dentry); + rpc_unlink(idmap->idmap_path); clp->cl_idmap = NULL; kfree(idmap); } diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index b5b51c196690..ab151bbb66df 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -59,7 +59,7 @@ struct rpc_clnt { int cl_nodelen; /* nodename length */ char cl_nodename[UNX_MAXNODENAME]; - struct dentry * __cl_parent_dentry; + char cl_pathname[30];/* Path in rpc_pipe_fs */ struct dentry * cl_dentry; /* inode */ struct rpc_clnt * cl_parent; /* Points to parent of clones */ struct rpc_rtt cl_rtt_default; diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 63878d05c9a9..63929349571f 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -41,11 +41,10 @@ RPC_I(struct inode *inode) extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); -extern struct dentry *rpc_mkdir(struct dentry *, char *, struct rpc_clnt *); -extern void rpc_rmdir(struct dentry *); -extern struct dentry *rpc_mkpipe(struct dentry *, char *, void *, - struct rpc_pipe_ops *, int flags); -extern void rpc_unlink(struct dentry *); +extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *); +extern int rpc_rmdir(char *); +extern struct dentry *rpc_mkpipe(char *, void *, struct rpc_pipe_ops *, int flags); +extern int rpc_unlink(char *); #endif #endif diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index bd2555139fa9..d2b08f16c257 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -87,6 +87,7 @@ struct gss_auth { struct list_head upcalls; struct rpc_clnt *client; struct dentry *dentry; + char path[48]; spinlock_t lock; }; @@ -689,8 +690,10 @@ gss_create(struct rpc_clnt *clnt, rpc_authflavor_t flavor) if (err) goto err_put_mech; - gss_auth->dentry = rpc_mkpipe(clnt->cl_dentry, gss_auth->mech->gm_name, - clnt, &gss_upcall_ops, RPC_PIPE_WAIT_FOR_OPEN); + snprintf(gss_auth->path, sizeof(gss_auth->path), "%s/%s", + clnt->cl_pathname, + gss_auth->mech->gm_name); + gss_auth->dentry = rpc_mkpipe(gss_auth->path, clnt, &gss_upcall_ops, RPC_PIPE_WAIT_FOR_OPEN); if (IS_ERR(gss_auth->dentry)) { err = PTR_ERR(gss_auth->dentry); goto err_put_mech; @@ -715,7 +718,7 @@ gss_destroy(struct rpc_auth *auth) auth, auth->au_flavor); gss_auth = container_of(auth, struct gss_auth, rpc_auth); - rpc_unlink(gss_auth->dentry); + rpc_unlink(gss_auth->path); gss_mech_put(gss_auth->mech); rpcauth_free_credcache(auth); diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 63bf591310e0..5a8f01d726e9 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -67,42 +67,26 @@ static u32 * call_verify(struct rpc_task *task); static int rpc_setup_pipedir(struct rpc_clnt *clnt, char *dir_name) { - static unsigned int clntid; - char name[128]; + static uint32_t clntid; int error; if (dir_name == NULL) return 0; - - retry_parent: - clnt->__cl_parent_dentry = rpc_mkdir(NULL, dir_name, NULL); - if (IS_ERR(clnt->__cl_parent_dentry)) { - error = PTR_ERR(clnt->__cl_parent_dentry); - if (error == -EEXIST) - goto retry_parent; /* XXX(hch): WTF? */ - - printk(KERN_INFO "RPC: Couldn't create pipefs entry %s, error %d\n", - dir_name, error); - return error; - } - - - retry_child: - snprintf(name, sizeof(name), "clnt%x", clntid++); - name[sizeof(name) - 1] = '\0'; - - clnt->cl_dentry = rpc_mkdir(clnt->__cl_parent_dentry, name, clnt); - if (IS_ERR(clnt->cl_dentry)) { + for (;;) { + snprintf(clnt->cl_pathname, sizeof(clnt->cl_pathname), + "%s/clnt%x", dir_name, + (unsigned int)clntid++); + clnt->cl_pathname[sizeof(clnt->cl_pathname) - 1] = '\0'; + clnt->cl_dentry = rpc_mkdir(clnt->cl_pathname, clnt); + if (!IS_ERR(clnt->cl_dentry)) + return 0; error = PTR_ERR(clnt->cl_dentry); - if (error == -EEXIST) - goto retry_child; - printk(KERN_INFO "RPC: Couldn't create pipefs entry %s, error %d\n", - name, error); - rpc_rmdir(clnt->__cl_parent_dentry); - return error; + if (error != -EEXIST) { + printk(KERN_INFO "RPC: Couldn't create pipefs entry %s, error %d\n", + clnt->cl_pathname, error); + return error; + } } - - return 0; } /* @@ -190,8 +174,7 @@ rpc_new_client(struct rpc_xprt *xprt, char *servname, return clnt; out_no_auth: - rpc_rmdir(clnt->cl_dentry); - rpc_rmdir(clnt->__cl_parent_dentry); + rpc_rmdir(clnt->cl_pathname); out_no_path: if (clnt->cl_server != clnt->cl_inline_name) kfree(clnt->cl_server); @@ -319,10 +302,8 @@ rpc_destroy_client(struct rpc_clnt *clnt) rpc_destroy_client(clnt->cl_parent); goto out_free; } - if (clnt->cl_dentry) - rpc_rmdir(clnt->cl_dentry); - if (clnt->__cl_parent_dentry) - rpc_rmdir(clnt->__cl_parent_dentry); + if (clnt->cl_pathname[0]) + rpc_rmdir(clnt->cl_pathname); if (clnt->cl_xprt) { xprt_destroy(clnt->cl_xprt); clnt->cl_xprt = NULL; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index b382809726d8..ded6c63f11ec 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -414,6 +414,38 @@ rpc_put_mount(void) simple_release_fs(&rpc_mount, &rpc_mount_count); } +static int +rpc_lookup_parent(char *path, struct nameidata *nd) +{ + if (path[0] == '\0') + return -ENOENT; + if (rpc_get_mount()) { + printk(KERN_WARNING "%s: %s failed to mount " + "pseudofilesystem \n", __FILE__, __FUNCTION__); + return -ENODEV; + } + nd->mnt = mntget(rpc_mount); + nd->dentry = dget(rpc_mount->mnt_root); + nd->last_type = LAST_ROOT; + nd->flags = LOOKUP_PARENT; + nd->depth = 0; + + if (path_walk(path, nd)) { + printk(KERN_WARNING "%s: %s failed to find path %s\n", + __FILE__, __FUNCTION__, path); + rpc_put_mount(); + return -ENOENT; + } + return 0; +} + +static void +rpc_release_path(struct nameidata *nd) +{ + path_release(nd); + rpc_put_mount(); +} + static struct inode * rpc_get_inode(struct super_block *sb, int mode) { @@ -518,149 +550,197 @@ rpc_populate(struct dentry *parent, return -ENOMEM; } -struct dentry * -rpc_mkdir(struct dentry *parent, char *name, struct rpc_clnt *rpc_client) +static int +__rpc_mkdir(struct inode *dir, struct dentry *dentry) { - struct inode *dir; - struct dentry *dentry; struct inode *inode; + + inode = rpc_get_inode(dir->i_sb, S_IFDIR | S_IRUSR | S_IXUSR); + if (!inode) + goto out_err; + inode->i_ino = iunique(dir->i_sb, 100); + d_instantiate(dentry, inode); + dir->i_nlink++; + inode_dir_notify(dir, DN_CREATE); + rpc_get_mount(); + return 0; +out_err: + printk(KERN_WARNING "%s: %s failed to allocate inode for dentry %s\n", + __FILE__, __FUNCTION__, dentry->d_name.name); + return -ENOMEM; +} + +static int +__rpc_rmdir(struct inode *dir, struct dentry *dentry) +{ int error; - if (!parent) - parent = rpc_mount->mnt_root; + shrink_dcache_parent(dentry); + if (dentry->d_inode) { + rpc_close_pipes(dentry->d_inode); + rpc_inode_setowner(dentry->d_inode, NULL); + } + if ((error = simple_rmdir(dir, dentry)) != 0) + return error; + if (!error) { + inode_dir_notify(dir, DN_DELETE); + d_drop(dentry); + rpc_put_mount(); + } + return 0; +} - dir = parent->d_inode; - - error = rpc_get_mount(); - if (error) - return ERR_PTR(error); +static struct dentry * +rpc_lookup_negative(char *path, struct nameidata *nd) +{ + struct dentry *dentry; + struct inode *dir; + int error; + if ((error = rpc_lookup_parent(path, nd)) != 0) + return ERR_PTR(error); + dir = nd->dentry->d_inode; down(&dir->i_sem); - dentry = lookup_one_len(name, parent, strlen(name)); + dentry = lookup_hash(&nd->last, nd->dentry); if (IS_ERR(dentry)) - goto out_unlock; + goto out_err; if (dentry->d_inode) { + dput(dentry); dentry = ERR_PTR(-EEXIST); - goto out_dput; + goto out_err; } - - inode = rpc_get_inode(dir->i_sb, S_IFDIR | S_IRUSR | S_IXUSR); - if (!inode) - goto out_dput; - inode->i_ino = iunique(dir->i_sb, 100); - dir->i_nlink++; - RPC_I(dentry->d_inode)->private = rpc_client; - - d_instantiate(dentry, inode); - dget(dentry); + return dentry; +out_err: up(&dir->i_sem); + rpc_release_path(nd); + return dentry; +} - inode_dir_notify(dir, DN_CREATE); +struct dentry * +rpc_mkdir(char *path, struct rpc_clnt *rpc_client) +{ + struct nameidata nd; + struct dentry *dentry; + struct inode *dir; + int error; + + dentry = rpc_lookup_negative(path, &nd); + if (IS_ERR(dentry)) + return dentry; + dir = nd.dentry->d_inode; + if ((error = __rpc_mkdir(dir, dentry)) != 0) + goto err_dput; + RPC_I(dentry->d_inode)->private = rpc_client; error = rpc_populate(dentry, authfiles, RPCAUTH_info, RPCAUTH_EOF); if (error) - goto out_depopulate; - - return dentry; - - out_depopulate: - rpc_rmdir(dentry); - out_dput: - dput(dentry); - out_unlock: + goto err_depopulate; +out: up(&dir->i_sem); - rpc_put_mount(); + rpc_release_path(&nd); return dentry; +err_depopulate: + rpc_depopulate(dentry); + __rpc_rmdir(dir, dentry); +err_dput: + dput(dentry); + printk(KERN_WARNING "%s: %s() failed to create directory %s (errno = %d)\n", + __FILE__, __FUNCTION__, path, error); + dentry = ERR_PTR(error); + goto out; } -void -rpc_rmdir(struct dentry *dentry) +int +rpc_rmdir(char *path) { - struct dentry *parent = dentry->d_parent; - - rpc_depopulate(dentry); + struct nameidata nd; + struct dentry *dentry; + struct inode *dir; + int error; - down(&parent->d_inode->i_sem); - if (dentry->d_inode) { - rpc_close_pipes(dentry->d_inode); - rpc_inode_setowner(dentry->d_inode, NULL); - simple_rmdir(parent->d_inode, dentry); + if ((error = rpc_lookup_parent(path, &nd)) != 0) + return error; + dir = nd.dentry->d_inode; + down(&dir->i_sem); + dentry = lookup_hash(&nd.last, nd.dentry); + if (IS_ERR(dentry)) { + error = PTR_ERR(dentry); + goto out_release; } - up(&parent->d_inode->i_sem); - - inode_dir_notify(parent->d_inode, DN_DELETE); - rpc_put_mount(); + rpc_depopulate(dentry); + error = __rpc_rmdir(dir, dentry); + dput(dentry); +out_release: + up(&dir->i_sem); + rpc_release_path(&nd); + return error; } struct dentry * -rpc_mkpipe(struct dentry *parent, char *name, void *private, - struct rpc_pipe_ops *ops, int flags) +rpc_mkpipe(char *path, void *private, struct rpc_pipe_ops *ops, int flags) { - struct inode *dir = parent->d_inode; + struct nameidata nd; struct dentry *dentry; - struct inode *inode; + struct inode *dir, *inode; struct rpc_inode *rpci; - int error; - - error = rpc_get_mount(); - if (error) - return ERR_PTR(error); - down(&parent->d_inode->i_sem); - dentry = lookup_one_len(name, parent, strlen(name)); + dentry = rpc_lookup_negative(path, &nd); if (IS_ERR(dentry)) - goto out_unlock; - if (dentry->d_inode) { - dentry = ERR_PTR(-EEXIST); - goto out_dput; - } - - inode = rpc_get_inode(parent->d_inode->i_sb, - S_IFSOCK | S_IRUSR | S_IWUSR); - if (!inode) { - dentry = ERR_PTR(-ENOMEM); - goto out_dput; - } - + return dentry; + dir = nd.dentry->d_inode; + inode = rpc_get_inode(dir->i_sb, S_IFSOCK | S_IRUSR | S_IWUSR); + if (!inode) + goto err_dput; inode->i_ino = iunique(dir->i_sb, 100); inode->i_fop = &rpc_pipe_fops; - + d_instantiate(dentry, inode); rpci = RPC_I(inode); rpci->private = private; rpci->flags = flags; rpci->ops = ops; - - d_instantiate(dentry, inode); - dget(dentry); - up(&parent->d_inode->i_sem); - inode_dir_notify(dir, DN_CREATE); +out: + up(&dir->i_sem); + rpc_release_path(&nd); return dentry; - - out_dput: +err_dput: dput(dentry); - out_unlock: - up(&parent->d_inode->i_sem); - rpc_put_mount(); - return dentry; + dentry = ERR_PTR(-ENOMEM); + printk(KERN_WARNING "%s: %s() failed to create pipe %s (errno = %d)\n", + __FILE__, __FUNCTION__, path, -ENOMEM); + goto out; } -void -rpc_unlink(struct dentry *dentry) +int +rpc_unlink(char *path) { - struct dentry *parent = dentry->d_parent; + struct nameidata nd; + struct dentry *dentry; + struct inode *dir; + int error; - down(&parent->d_inode->i_sem); + if ((error = rpc_lookup_parent(path, &nd)) != 0) + return error; + dir = nd.dentry->d_inode; + down(&dir->i_sem); + dentry = lookup_hash(&nd.last, nd.dentry); + if (IS_ERR(dentry)) { + error = PTR_ERR(dentry); + goto out_release; + } + d_drop(dentry); if (dentry->d_inode) { rpc_close_pipes(dentry->d_inode); rpc_inode_setowner(dentry->d_inode, NULL); - simple_unlink(parent->d_inode, dentry); + error = simple_unlink(dir, dentry); } - up(&parent->d_inode->i_sem); - - inode_dir_notify(parent->d_inode, DN_DELETE); - rpc_put_mount(); + dput(dentry); + inode_dir_notify(dir, DN_DELETE); +out_release: + up(&dir->i_sem); + rpc_release_path(&nd); + return error; } /* -- GitLab From 463eb297401eeb174db3fdf37a87911b576b3993 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 23 Sep 2005 11:39:07 -0600 Subject: [PATCH 0141/1519] [IA64] respect ACPI producer/consumer flag for PCI root bridges Address space resources for ACPI devices have a producer/consumer flag. All devices "consume" the indicated address space. If the resource is marked as a "producer", the range is also passed on to child devices. We currently ignore this flag when setting up MMIO and I/O port windows for PCI root bridges, so we could mistakenly interpret a "consumed-only" range, like CSR space for the device itself, as a window that is routed to children. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/pci/pci.c | 35 +++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 9b5de589b82f..564319e29bd5 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -191,6 +191,29 @@ add_io_space (struct acpi_resource_address64 *addr) return IO_SPACE_BASE(i); } +static acpi_status __devinit resource_to_window(struct acpi_resource *resource, + struct acpi_resource_address64 *addr) +{ + acpi_status status; + + /* + * We're only interested in _CRS descriptors that are + * - address space descriptors for memory or I/O space + * - non-zero size + * - producers, i.e., the address space is routed downstream, + * not consumed by the bridge itself + */ + status = acpi_resource_to_address64(resource, addr); + if (ACPI_SUCCESS(status) && + (addr->resource_type == ACPI_MEMORY_RANGE || + addr->resource_type == ACPI_IO_RANGE) && + addr->address_length && + addr->producer_consumer == ACPI_PRODUCER) + return AE_OK; + + return AE_ERROR; +} + static acpi_status __devinit count_window (struct acpi_resource *resource, void *data) { @@ -198,11 +221,9 @@ count_window (struct acpi_resource *resource, void *data) struct acpi_resource_address64 addr; acpi_status status; - status = acpi_resource_to_address64(resource, &addr); + status = resource_to_window(resource, &addr); if (ACPI_SUCCESS(status)) - if (addr.resource_type == ACPI_MEMORY_RANGE || - addr.resource_type == ACPI_IO_RANGE) - (*windows)++; + (*windows)++; return AE_OK; } @@ -221,13 +242,11 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) unsigned long flags, offset = 0; struct resource *root; - status = acpi_resource_to_address64(res, &addr); + /* Return AE_OK for non-window resources to keep scanning for more */ + status = resource_to_window(res, &addr); if (!ACPI_SUCCESS(status)) return AE_OK; - if (!addr.address_length) - return AE_OK; - if (addr.resource_type == ACPI_MEMORY_RANGE) { flags = IORESOURCE_MEM; root = &iomem_resource; -- GitLab From 6cd7525a00f3b926e8bd2e402954ed3e09a8e924 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 22 Sep 2005 21:24:59 -0400 Subject: [PATCH 0142/1519] SUNRPC: fix bug in patch "portmapper doesn't need a reserved port" The in-kernel portmapper does in fact need a reserved port when registering new services, but not when performing bind queries. Ensure that we distinguish between the two cases. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/pmap_clnt.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/sunrpc/pmap_clnt.c b/net/sunrpc/pmap_clnt.c index d8e3f220002b..a398575f94b8 100644 --- a/net/sunrpc/pmap_clnt.c +++ b/net/sunrpc/pmap_clnt.c @@ -26,7 +26,7 @@ #define PMAP_GETPORT 3 static struct rpc_procinfo pmap_procedures[]; -static struct rpc_clnt * pmap_create(char *, struct sockaddr_in *, int); +static struct rpc_clnt * pmap_create(char *, struct sockaddr_in *, int, int); static void pmap_getport_done(struct rpc_task *); static struct rpc_program pmap_program; static DEFINE_SPINLOCK(pmap_lock); @@ -65,7 +65,7 @@ rpc_getport(struct rpc_task *task, struct rpc_clnt *clnt) map->pm_binding = 1; spin_unlock(&pmap_lock); - pmap_clnt = pmap_create(clnt->cl_server, sap, map->pm_prot); + pmap_clnt = pmap_create(clnt->cl_server, sap, map->pm_prot, 0); if (IS_ERR(pmap_clnt)) { task->tk_status = PTR_ERR(pmap_clnt); goto bailout; @@ -112,7 +112,7 @@ rpc_getport_external(struct sockaddr_in *sin, __u32 prog, __u32 vers, int prot) NIPQUAD(sin->sin_addr.s_addr), prog, vers, prot); sprintf(hostname, "%u.%u.%u.%u", NIPQUAD(sin->sin_addr.s_addr)); - pmap_clnt = pmap_create(hostname, sin, prot); + pmap_clnt = pmap_create(hostname, sin, prot, 0); if (IS_ERR(pmap_clnt)) return PTR_ERR(pmap_clnt); @@ -171,7 +171,7 @@ rpc_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) sin.sin_family = AF_INET; sin.sin_addr.s_addr = htonl(INADDR_LOOPBACK); - pmap_clnt = pmap_create("localhost", &sin, IPPROTO_UDP); + pmap_clnt = pmap_create("localhost", &sin, IPPROTO_UDP, 1); if (IS_ERR(pmap_clnt)) { error = PTR_ERR(pmap_clnt); dprintk("RPC: couldn't create pmap client. Error = %d\n", error); @@ -198,7 +198,7 @@ rpc_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) } static struct rpc_clnt * -pmap_create(char *hostname, struct sockaddr_in *srvaddr, int proto) +pmap_create(char *hostname, struct sockaddr_in *srvaddr, int proto, int privileged) { struct rpc_xprt *xprt; struct rpc_clnt *clnt; @@ -208,7 +208,8 @@ pmap_create(char *hostname, struct sockaddr_in *srvaddr, int proto) if (IS_ERR(xprt)) return (struct rpc_clnt *)xprt; xprt->addr.sin_port = htons(RPC_PMAP_PORT); - xprt->resvport = 0; + if (!privileged) + xprt->resvport = 0; /* printk("pmap: create clnt\n"); */ clnt = rpc_new_client(xprt, hostname, -- GitLab From 61b9cf7c6cf5077c40ad37480fa56f6574af3db5 Mon Sep 17 00:00:00 2001 From: Mark Maule Date: Fri, 23 Sep 2005 12:31:53 -0500 Subject: [PATCH 0143/1519] [IA64-SGI] fix sn_pci_legacy_read/fix sn_pci_legacy_write This patch adds a #define for SN_SAL_IOIF_PCI_SAFE and makes that the preferred method of implementing sn_pci_legacy_read() and sn_pci_legacy_write(). This SAL call has been present in SGI proms since version 4.10. If the SN_SAL_IOIF_PCI_SAFE call fails, revert to the previous code for compatability with older proms. Signed-off-by: Mark Maule Signed-off-by: Tony Luck --- arch/ia64/sn/pci/pci_dma.c | 46 ++++++++++++++++++++++++++++++++++++ include/asm-ia64/sn/sn_sal.h | 2 +- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 0e4b9ad9ef02..abdf6eea6ac8 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -326,6 +326,29 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) { unsigned long addr; int ret; + struct ia64_sal_retval isrv; + + /* + * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work + * around hw issues at the pci bus level. SGI proms older than + * 4.10 don't implment this. + */ + + SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, + pci_domain_nr(bus), bus->number, + 0, /* io */ + 0, /* read */ + port, size, __pa(val)); + + if (isrv.status == 0) + return size; + + /* + * If the above failed, retry using the SAL_PROBE call which should + * be present in all proms (but which cannot work round PCI chipset + * bugs). This code is retained for compatability with old + * pre-4.10 proms, and should be removed at some point in the future. + */ if (!SN_PCIBUS_BUSSOFT(bus)) return -ENODEV; @@ -349,6 +372,29 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) int ret = size; unsigned long paddr; unsigned long *addr; + struct ia64_sal_retval isrv; + + /* + * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work + * around hw issues at the pci bus level. SGI proms older than + * 4.10 don't implment this. + */ + + SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, + pci_domain_nr(bus), bus->number, + 0, /* io */ + 1, /* write */ + port, size, __pa(&val)); + + if (isrv.status == 0) + return size; + + /* + * If the above failed, retry using the SAL_PROBE call which should + * be present in all proms (but which cannot work round PCI chipset + * bugs). This code is retained for compatability with old + * pre-4.10 proms, and should be removed at some point in the future. + */ if (!SN_PCIBUS_BUSSOFT(bus)) { ret = -ENODEV; diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index fea35b33d4e4..b2d32837723f 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -67,7 +67,7 @@ #define SN_SAL_IOIF_INTERRUPT 0x0200004a #define SN_SAL_HWPERF_OP 0x02000050 // lock #define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051 - +#define SN_SAL_IOIF_PCI_SAFE 0x02000052 #define SN_SAL_IOIF_SLOT_ENABLE 0x02000053 #define SN_SAL_IOIF_SLOT_DISABLE 0x02000054 #define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055 -- GitLab From bb40dcbb0fcebe1df08ba261483fcc38b307d063 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 23 Sep 2005 22:54:21 -0400 Subject: [PATCH 0144/1519] [netdrvr gianfar] use new phy layer Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 + drivers/net/Makefile | 2 +- drivers/net/gianfar.c | 412 +++++---------------- drivers/net/gianfar.h | 30 +- drivers/net/gianfar_ethtool.c | 100 +++-- drivers/net/gianfar_mii.c | 219 +++++++++++ drivers/net/gianfar_mii.h | 45 +++ drivers/net/gianfar_phy.c | 661 ---------------------------------- drivers/net/gianfar_phy.h | 213 ----------- 9 files changed, 433 insertions(+), 1251 deletions(-) create mode 100644 drivers/net/gianfar_mii.c create mode 100644 drivers/net/gianfar_mii.h delete mode 100644 drivers/net/gianfar_phy.c delete mode 100644 drivers/net/gianfar_phy.h diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ff3fccd7513b..4739a63601eb 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2075,6 +2075,8 @@ config SPIDER_NET config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx + select PHYLIB + select PHYCONTROL help This driver supports the Gigabit TSEC on the MPC85xx family of chips, and the FEC on the 8540 diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e6acba68923a..39b17cb4f86e 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o -gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_phy.o +gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_mii.o # # link order important here diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 6518334b9280..ae5a2ed3b264 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -29,12 +29,7 @@ * define the configuration needed by the board are defined in a * board structure in arch/ppc/platforms (though I do not * discount the possibility that other architectures could one - * day be supported. One assumption the driver currently makes - * is that the PHY is configured in such a way to advertise all - * capabilities. This is a sensible default, and on certain - * PHYs, changing this default encounters substantial errata - * issues. Future versions may remove this requirement, but for - * now, it is best for the firmware to ensure this is the case. + * day be supported. * * The Gianfar Ethernet Controller uses a ring of buffer * descriptors. The beginning is indicated by a register @@ -47,7 +42,7 @@ * corresponding bit in the IMASK register is also set (if * interrupt coalescing is active, then the interrupt may not * happen immediately, but will wait until either a set number - * of frames or amount of time have passed.). In NAPI, the + * of frames or amount of time have passed). In NAPI, the * interrupt handler will signal there is work to be done, and * exit. Without NAPI, the packet(s) will be handled * immediately. Both methods will start at the last known empty @@ -75,6 +70,7 @@ #include #include #include +#include #include #include #include @@ -97,9 +93,11 @@ #include #include #include +#include +#include #include "gianfar.h" -#include "gianfar_phy.h" +#include "gianfar_mii.h" #define TX_TIMEOUT (1*HZ) #define SKB_ALLOC_TIMEOUT 1000000 @@ -113,9 +111,8 @@ #endif const char gfar_driver_name[] = "Gianfar Ethernet"; -const char gfar_driver_version[] = "1.1"; +const char gfar_driver_version[] = "1.2"; -int startup_gfar(struct net_device *dev); static int gfar_enet_open(struct net_device *dev); static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev); static void gfar_timeout(struct net_device *dev); @@ -126,17 +123,13 @@ static int gfar_set_mac_address(struct net_device *dev); static int gfar_change_mtu(struct net_device *dev, int new_mtu); static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs); -static irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static void gfar_phy_change(void *data); -static void gfar_phy_timer(unsigned long data); static void adjust_link(struct net_device *dev); static void init_registers(struct net_device *dev); static int init_phy(struct net_device *dev); static int gfar_probe(struct device *device); static int gfar_remove(struct device *device); -void free_skb_resources(struct gfar_private *priv); +static void free_skb_resources(struct gfar_private *priv); static void gfar_set_multi(struct net_device *dev); static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr); #ifdef CONFIG_GFAR_NAPI @@ -144,7 +137,6 @@ static int gfar_poll(struct net_device *dev, int *budget); #endif int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length); -static void gfar_phy_startup_timer(unsigned long data); static void gfar_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp); static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); @@ -162,6 +154,9 @@ int gfar_uses_fcb(struct gfar_private *priv) else return 0; } + +/* Set up the ethernet device structure, private data, + * and anything else we need before we start */ static int gfar_probe(struct device *device) { u32 tempval; @@ -175,7 +170,7 @@ static int gfar_probe(struct device *device) einfo = (struct gianfar_platform_data *) pdev->dev.platform_data; - if (einfo == NULL) { + if (NULL == einfo) { printk(KERN_ERR "gfar %d: Missing additional data!\n", pdev->id); @@ -185,7 +180,7 @@ static int gfar_probe(struct device *device) /* Create an ethernet device instance */ dev = alloc_etherdev(sizeof (*priv)); - if (dev == NULL) + if (NULL == dev) return -ENOMEM; priv = netdev_priv(dev); @@ -207,20 +202,11 @@ static int gfar_probe(struct device *device) priv->regs = (struct gfar *) ioremap(r->start, sizeof (struct gfar)); - if (priv->regs == NULL) { + if (NULL == priv->regs) { err = -ENOMEM; goto regs_fail; } - /* Set the PHY base address */ - priv->phyregs = (struct gfar *) - ioremap(einfo->phy_reg_addr, sizeof (struct gfar)); - - if (priv->phyregs == NULL) { - err = -ENOMEM; - goto phy_regs_fail; - } - spin_lock_init(&priv->lock); dev_set_drvdata(device, dev); @@ -386,12 +372,10 @@ static int gfar_probe(struct device *device) return 0; register_fail: - iounmap((void *) priv->phyregs); -phy_regs_fail: iounmap((void *) priv->regs); regs_fail: free_netdev(dev); - return -ENOMEM; + return err; } static int gfar_remove(struct device *device) @@ -402,108 +386,41 @@ static int gfar_remove(struct device *device) dev_set_drvdata(device, NULL); iounmap((void *) priv->regs); - iounmap((void *) priv->phyregs); free_netdev(dev); return 0; } -/* Configure the PHY for dev. - * returns 0 if success. -1 if failure +/* Initializes driver's PHY state, and attaches to the PHY. + * Returns 0 on success. */ static int init_phy(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - struct phy_info *curphy; - unsigned int timeout = PHY_INIT_TIMEOUT; - struct gfar *phyregs = priv->phyregs; - struct gfar_mii_info *mii_info; - int err; + uint gigabit_support = + priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? + SUPPORTED_1000baseT_Full : 0; + struct phy_device *phydev; priv->oldlink = 0; priv->oldspeed = 0; priv->oldduplex = -1; - mii_info = kmalloc(sizeof(struct gfar_mii_info), - GFP_KERNEL); - - if(NULL == mii_info) { - if (netif_msg_ifup(priv)) - printk(KERN_ERR "%s: Could not allocate mii_info\n", - dev->name); - return -ENOMEM; - } - - mii_info->speed = SPEED_1000; - mii_info->duplex = DUPLEX_FULL; - mii_info->pause = 0; - mii_info->link = 1; - - mii_info->advertising = (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full); - mii_info->autoneg = 1; + phydev = phy_connect(dev, priv->einfo->bus_id, &adjust_link, 0); - spin_lock_init(&mii_info->mdio_lock); - - mii_info->mii_id = priv->einfo->phyid; - - mii_info->dev = dev; - - mii_info->mdio_read = &read_phy_reg; - mii_info->mdio_write = &write_phy_reg; - - priv->mii_info = mii_info; - - /* Reset the management interface */ - gfar_write(&phyregs->miimcfg, MIIMCFG_RESET); - - /* Setup the MII Mgmt clock speed */ - gfar_write(&phyregs->miimcfg, MIIMCFG_INIT_VALUE); - - /* Wait until the bus is free */ - while ((gfar_read(&phyregs->miimind) & MIIMIND_BUSY) && - timeout--) - cpu_relax(); - - if(timeout <= 0) { - printk(KERN_ERR "%s: The MII Bus is stuck!\n", - dev->name); - err = -1; - goto bus_fail; - } - - /* get info for this PHY */ - curphy = get_phy_info(priv->mii_info); - - if (curphy == NULL) { - if (netif_msg_ifup(priv)) - printk(KERN_ERR "%s: No PHY found\n", dev->name); - err = -1; - goto no_phy; + if (IS_ERR(phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(phydev); } - mii_info->phyinfo = curphy; + /* Remove any features not supported by the controller */ + phydev->supported &= (GFAR_SUPPORTED | gigabit_support); + phydev->advertising = phydev->supported; - /* Run the commands which initialize the PHY */ - if(curphy->init) { - err = curphy->init(priv->mii_info); - - if (err) - goto phy_init_fail; - } + priv->phydev = phydev; return 0; - -phy_init_fail: -no_phy: -bus_fail: - kfree(mii_info); - - return err; } static void init_registers(struct net_device *dev) @@ -603,24 +520,13 @@ void stop_gfar(struct net_device *dev) struct gfar *regs = priv->regs; unsigned long flags; + phy_stop(priv->phydev); + /* Lock it down */ spin_lock_irqsave(&priv->lock, flags); - /* Tell the kernel the link is down */ - priv->mii_info->link = 0; - adjust_link(dev); - gfar_halt(dev); - if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) { - /* Clear any pending interrupts */ - mii_clear_phy_interrupt(priv->mii_info); - - /* Disable PHY Interrupts */ - mii_configure_phy_interrupt(priv->mii_info, - MII_INTERRUPT_DISABLED); - } - spin_unlock_irqrestore(&priv->lock, flags); /* Free the IRQs */ @@ -629,13 +535,7 @@ void stop_gfar(struct net_device *dev) free_irq(priv->interruptTransmit, dev); free_irq(priv->interruptReceive, dev); } else { - free_irq(priv->interruptTransmit, dev); - } - - if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) { - free_irq(priv->einfo->interruptPHY, dev); - } else { - del_timer_sync(&priv->phy_info_timer); + free_irq(priv->interruptTransmit, dev); } free_skb_resources(priv); @@ -649,7 +549,7 @@ void stop_gfar(struct net_device *dev) /* If there are any tx skbs or rx skbs still around, free them. * Then free tx_skbuff and rx_skbuff */ -void free_skb_resources(struct gfar_private *priv) +static void free_skb_resources(struct gfar_private *priv) { struct rxbd8 *rxbdp; struct txbd8 *txbdp; @@ -770,7 +670,7 @@ int startup_gfar(struct net_device *dev) (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * priv->tx_ring_size, GFP_KERNEL); - if (priv->tx_skbuff == NULL) { + if (NULL == priv->tx_skbuff) { if (netif_msg_ifup(priv)) printk(KERN_ERR "%s: Could not allocate tx_skbuff\n", dev->name); @@ -785,7 +685,7 @@ int startup_gfar(struct net_device *dev) (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) * priv->rx_ring_size, GFP_KERNEL); - if (priv->rx_skbuff == NULL) { + if (NULL == priv->rx_skbuff) { if (netif_msg_ifup(priv)) printk(KERN_ERR "%s: Could not allocate rx_skbuff\n", dev->name); @@ -879,13 +779,7 @@ int startup_gfar(struct net_device *dev) } } - /* Set up the PHY change work queue */ - INIT_WORK(&priv->tq, gfar_phy_change, dev); - - init_timer(&priv->phy_info_timer); - priv->phy_info_timer.function = &gfar_phy_startup_timer; - priv->phy_info_timer.data = (unsigned long) priv->mii_info; - mod_timer(&priv->phy_info_timer, jiffies + HZ); + phy_start(priv->phydev); /* Configure the coalescing support */ if (priv->txcoalescing) @@ -933,11 +827,6 @@ int startup_gfar(struct net_device *dev) priv->tx_bd_base, gfar_read(®s->tbase0)); - if (priv->mii_info->phyinfo->close) - priv->mii_info->phyinfo->close(priv->mii_info); - - kfree(priv->mii_info); - return err; } @@ -1035,7 +924,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) txbdp->status &= TXBD_WRAP; /* Set up checksumming */ - if ((dev->features & NETIF_F_IP_CSUM) + if ((dev->features & NETIF_F_IP_CSUM) && (CHECKSUM_HW == skb->ip_summed)) { fcb = gfar_add_fcb(skb, txbdp); gfar_tx_checksum(skb, fcb); @@ -1103,11 +992,9 @@ static int gfar_close(struct net_device *dev) struct gfar_private *priv = netdev_priv(dev); stop_gfar(dev); - /* Shutdown the PHY */ - if (priv->mii_info->phyinfo->close) - priv->mii_info->phyinfo->close(priv->mii_info); - - kfree(priv->mii_info); + /* Disconnect from the PHY */ + phy_disconnect(priv->phydev); + priv->phydev = NULL; netif_stop_queue(dev); @@ -1343,7 +1230,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) while ((!skb) && timeout--) skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT); - if (skb == NULL) + if (NULL == skb) return NULL; /* We need the data buffer to be aligned properly. We will reserve @@ -1490,7 +1377,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, struct gfar_private *priv = netdev_priv(dev); struct rxfcb *fcb = NULL; - if (skb == NULL) { + if (NULL == skb) { if (netif_msg_rx_err(priv)) printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name); priv->stats.rx_dropped++; @@ -1718,131 +1605,9 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } -static irqreturn_t phy_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct net_device *dev = (struct net_device *) dev_id; - struct gfar_private *priv = netdev_priv(dev); - - /* Clear the interrupt */ - mii_clear_phy_interrupt(priv->mii_info); - - /* Disable PHY interrupts */ - mii_configure_phy_interrupt(priv->mii_info, - MII_INTERRUPT_DISABLED); - - /* Schedule the phy change */ - schedule_work(&priv->tq); - - return IRQ_HANDLED; -} - -/* Scheduled by the phy_interrupt/timer to handle PHY changes */ -static void gfar_phy_change(void *data) -{ - struct net_device *dev = (struct net_device *) data; - struct gfar_private *priv = netdev_priv(dev); - int result = 0; - - /* Delay to give the PHY a chance to change the - * register state */ - msleep(1); - - /* Update the link, speed, duplex */ - result = priv->mii_info->phyinfo->read_status(priv->mii_info); - - /* Adjust the known status as long as the link - * isn't still coming up */ - if((0 == result) || (priv->mii_info->link == 0)) - adjust_link(dev); - - /* Reenable interrupts, if needed */ - if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) - mii_configure_phy_interrupt(priv->mii_info, - MII_INTERRUPT_ENABLED); -} - -/* Called every so often on systems that don't interrupt - * the core for PHY changes */ -static void gfar_phy_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct gfar_private *priv = netdev_priv(dev); - - schedule_work(&priv->tq); - - mod_timer(&priv->phy_info_timer, jiffies + - GFAR_PHY_CHANGE_TIME * HZ); -} - -/* Keep trying aneg for some time - * If, after GFAR_AN_TIMEOUT seconds, it has not - * finished, we switch to forced. - * Either way, once the process has completed, we either - * request the interrupt, or switch the timer over to - * using gfar_phy_timer to check status */ -static void gfar_phy_startup_timer(unsigned long data) -{ - int result; - static int secondary = GFAR_AN_TIMEOUT; - struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data; - struct gfar_private *priv = netdev_priv(mii_info->dev); - - /* Configure the Auto-negotiation */ - result = mii_info->phyinfo->config_aneg(mii_info); - - /* If autonegotiation failed to start, and - * we haven't timed out, reset the timer, and return */ - if (result && secondary--) { - mod_timer(&priv->phy_info_timer, jiffies + HZ); - return; - } else if (result) { - /* Couldn't start autonegotiation. - * Try switching to forced */ - mii_info->autoneg = 0; - result = mii_info->phyinfo->config_aneg(mii_info); - - /* Forcing failed! Give up */ - if(result) { - if (netif_msg_link(priv)) - printk(KERN_ERR "%s: Forcing failed!\n", - mii_info->dev->name); - return; - } - } - - /* Kill the timer so it can be restarted */ - del_timer_sync(&priv->phy_info_timer); - - /* Grab the PHY interrupt, if necessary/possible */ - if (priv->einfo->board_flags & FSL_GIANFAR_BRD_HAS_PHY_INTR) { - if (request_irq(priv->einfo->interruptPHY, - phy_interrupt, - SA_SHIRQ, - "phy_interrupt", - mii_info->dev) < 0) { - if (netif_msg_intr(priv)) - printk(KERN_ERR "%s: Can't get IRQ %d (PHY)\n", - mii_info->dev->name, - priv->einfo->interruptPHY); - } else { - mii_configure_phy_interrupt(priv->mii_info, - MII_INTERRUPT_ENABLED); - return; - } - } - - /* Start the timer again, this time in order to - * handle a change in status */ - init_timer(&priv->phy_info_timer); - priv->phy_info_timer.function = &gfar_phy_timer; - priv->phy_info_timer.data = (unsigned long) mii_info->dev; - mod_timer(&priv->phy_info_timer, jiffies + - GFAR_PHY_CHANGE_TIME * HZ); -} - /* Called every time the controller might need to be made * aware of new link state. The PHY code conveys this - * information through variables in the priv structure, and this + * information through variables in the phydev structure, and this * function converts those variables into the appropriate * register values, and can bring down the device if needed. */ @@ -1850,84 +1615,68 @@ static void adjust_link(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); struct gfar *regs = priv->regs; - u32 tempval; - struct gfar_mii_info *mii_info = priv->mii_info; + unsigned long flags; + struct phy_device *phydev = priv->phydev; + int new_state = 0; + + spin_lock_irqsave(&priv->lock, flags); + if (phydev->link) { + u32 tempval = gfar_read(®s->maccfg2); - if (mii_info->link) { /* Now we make sure that we can be in full duplex mode. * If not, we operate in half-duplex mode. */ - if (mii_info->duplex != priv->oldduplex) { - if (!(mii_info->duplex)) { - tempval = gfar_read(®s->maccfg2); + if (phydev->duplex != priv->oldduplex) { + new_state = 1; + if (!(phydev->duplex)) tempval &= ~(MACCFG2_FULL_DUPLEX); - gfar_write(®s->maccfg2, tempval); - - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Half Duplex\n", - dev->name); - } else { - tempval = gfar_read(®s->maccfg2); + else tempval |= MACCFG2_FULL_DUPLEX; - gfar_write(®s->maccfg2, tempval); - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Full Duplex\n", - dev->name); - } - - priv->oldduplex = mii_info->duplex; + priv->oldduplex = phydev->duplex; } - if (mii_info->speed != priv->oldspeed) { - switch (mii_info->speed) { + if (phydev->speed != priv->oldspeed) { + new_state = 1; + switch (phydev->speed) { case 1000: - tempval = gfar_read(®s->maccfg2); tempval = ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII); - gfar_write(®s->maccfg2, tempval); break; case 100: case 10: - tempval = gfar_read(®s->maccfg2); tempval = ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); - gfar_write(®s->maccfg2, tempval); break; default: if (netif_msg_link(priv)) printk(KERN_WARNING - "%s: Ack! Speed (%d) is not 10/100/1000!\n", - dev->name, mii_info->speed); + "%s: Ack! Speed (%d) is not 10/100/1000!\n", + dev->name, phydev->speed); break; } - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Speed %dBT\n", dev->name, - mii_info->speed); - - priv->oldspeed = mii_info->speed; + priv->oldspeed = phydev->speed; } + gfar_write(®s->maccfg2, tempval); + if (!priv->oldlink) { - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Link is up\n", dev->name); + new_state = 1; priv->oldlink = 1; - netif_carrier_on(dev); netif_schedule(dev); } - } else { - if (priv->oldlink) { - if (netif_msg_link(priv)) - printk(KERN_INFO "%s: Link is down\n", - dev->name); - priv->oldlink = 0; - priv->oldspeed = 0; - priv->oldduplex = -1; - netif_carrier_off(dev); - } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->oldspeed = 0; + priv->oldduplex = -1; } -} + if (new_state && netif_msg_link(priv)) + phy_print_status(phydev); + + spin_unlock_irqrestore(&priv->lock, flags); +} /* Update the hash table based on the current list of multicast * addresses we subscribe to. Also, change the promiscuity of @@ -2122,12 +1871,23 @@ static struct device_driver gfar_driver = { static int __init gfar_init(void) { - return driver_register(&gfar_driver); + int err = gfar_mdio_init(); + + if (err) + return err; + + err = driver_register(&gfar_driver); + + if (err) + gfar_mdio_exit(); + + return err; } static void __exit gfar_exit(void) { driver_unregister(&gfar_driver); + gfar_mdio_exit(); } module_init(gfar_init); diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 28af087d9fbb..c77ca6c0d04a 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -17,7 +17,6 @@ * * Still left to do: * -Add support for module parameters - * -Add support for ethtool -s * -Add patch for ethtool phys id */ #ifndef __GIANFAR_H @@ -37,7 +36,8 @@ #include #include #include -#include +#include +#include #include #include @@ -48,7 +48,8 @@ #include #include #include -#include "gianfar_phy.h" +#include +#include "gianfar_mii.h" /* The maximum number of packets to be handled in one call of gfar_poll */ #define GFAR_DEV_WEIGHT 64 @@ -73,7 +74,7 @@ #define PHY_INIT_TIMEOUT 100000 #define GFAR_PHY_CHANGE_TIME 2 -#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.1, " +#define DEVICE_NAME "%s: Gianfar Ethernet Controller Version 1.2, " #define DRV_NAME "gfar-enet" extern const char gfar_driver_name[]; extern const char gfar_driver_version[]; @@ -578,12 +579,7 @@ struct gfar { u32 hafdup; /* 0x.50c - Half Duplex Register */ u32 maxfrm; /* 0x.510 - Maximum Frame Length Register */ u8 res18[12]; - u32 miimcfg; /* 0x.520 - MII Management Configuration Register */ - u32 miimcom; /* 0x.524 - MII Management Command Register */ - u32 miimadd; /* 0x.528 - MII Management Address Register */ - u32 miimcon; /* 0x.52c - MII Management Control Register */ - u32 miimstat; /* 0x.530 - MII Management Status Register */ - u32 miimind; /* 0x.534 - MII Management Indicator Register */ + u8 gfar_mii_regs[24]; /* See gianfar_phy.h */ u8 res19[4]; u32 ifstat; /* 0x.53c - Interface Status Register */ u32 macstnaddr1; /* 0x.540 - Station Address Part 1 Register */ @@ -688,9 +684,6 @@ struct gfar_private { struct gfar *regs; /* Pointer to the GFAR memory mapped Registers */ u32 *hash_regs[16]; int hash_width; - struct gfar *phyregs; - struct work_struct tq; - struct timer_list phy_info_timer; struct net_device_stats stats; /* linux network statistics */ struct gfar_extra_stats extra_stats; spinlock_t lock; @@ -710,7 +703,8 @@ struct gfar_private { unsigned int interruptError; struct gianfar_platform_data *einfo; - struct gfar_mii_info *mii_info; + struct phy_device *phydev; + struct mii_bus *mii_bus; int oldspeed; int oldduplex; int oldlink; @@ -732,4 +726,12 @@ extern inline void gfar_write(volatile unsigned *addr, u32 val) extern struct ethtool_ops *gfar_op_array[]; +extern irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs); +extern int startup_gfar(struct net_device *dev); +extern void stop_gfar(struct net_device *dev); +extern void gfar_halt(struct net_device *dev); +extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, + int enable, u32 regnum, u32 read); +void gfar_setup_stashing(struct net_device *dev); + #endif /* __GIANFAR_H */ diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index a451de629197..68e3578e7613 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -39,17 +39,18 @@ #include #include #include +#include +#include #include "gianfar.h" #define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) -extern int startup_gfar(struct net_device *dev); -extern void stop_gfar(struct net_device *dev); -extern void gfar_halt(struct net_device *dev); extern void gfar_start(struct net_device *dev); extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit); +#define GFAR_MAX_COAL_USECS 0xffff +#define GFAR_MAX_COAL_FRAMES 0xff static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf); static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf); @@ -182,38 +183,32 @@ static void gfar_gdrvinfo(struct net_device *dev, struct drvinfo->eedump_len = 0; } + +static int gfar_ssettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct gfar_private *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + + if (NULL == phydev) + return -ENODEV; + + return phy_ethtool_sset(phydev, cmd); +} + + /* Return the current settings in the ethtool_cmd structure */ static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd) { struct gfar_private *priv = netdev_priv(dev); - uint gigabit_support = - priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? - SUPPORTED_1000baseT_Full : 0; - uint gigabit_advert = - priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? - ADVERTISED_1000baseT_Full: 0; - - cmd->supported = (SUPPORTED_10baseT_Half - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | gigabit_support | SUPPORTED_Autoneg); - - /* For now, we always advertise everything */ - cmd->advertising = (ADVERTISED_10baseT_Half - | ADVERTISED_100baseT_Half - | ADVERTISED_100baseT_Full - | gigabit_advert | ADVERTISED_Autoneg); - - cmd->speed = priv->mii_info->speed; - cmd->duplex = priv->mii_info->duplex; - cmd->port = PORT_MII; - cmd->phy_address = priv->mii_info->mii_id; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = AUTONEG_ENABLE; + struct phy_device *phydev = priv->phydev; + + if (NULL == phydev) + return -ENODEV; + cmd->maxtxpkt = priv->txcount; cmd->maxrxpkt = priv->rxcount; - return 0; + return phy_ethtool_gset(phydev, cmd); } /* Return the length of the register structure */ @@ -241,14 +236,14 @@ static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int use unsigned int count; /* The timer is different, depending on the interface speed */ - switch (priv->mii_info->speed) { - case 1000: + switch (priv->phydev->speed) { + case SPEED_1000: count = GFAR_GBIT_TIME; break; - case 100: + case SPEED_100: count = GFAR_100_TIME; break; - case 10: + case SPEED_10: default: count = GFAR_10_TIME; break; @@ -265,14 +260,14 @@ static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int tic unsigned int count; /* The timer is different, depending on the interface speed */ - switch (priv->mii_info->speed) { - case 1000: + switch (priv->phydev->speed) { + case SPEED_1000: count = GFAR_GBIT_TIME; break; - case 100: + case SPEED_100: count = GFAR_100_TIME; break; - case 10: + case SPEED_10: default: count = GFAR_10_TIME; break; @@ -292,6 +287,9 @@ static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) return -EOPNOTSUPP; + if (NULL == priv->phydev) + return -ENODEV; + cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, priv->rxtime); cvals->rx_max_coalesced_frames = priv->rxcount; @@ -348,6 +346,22 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals else priv->rxcoalescing = 1; + if (NULL == priv->phydev) + return -ENODEV; + + /* Check the bounds of the values */ + if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) { + pr_info("Coalescing is limited to %d microseconds\n", + GFAR_MAX_COAL_USECS); + return -EINVAL; + } + + if (cvals->rx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) { + pr_info("Coalescing is limited to %d frames\n", + GFAR_MAX_COAL_FRAMES); + return -EINVAL; + } + priv->rxtime = gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs); priv->rxcount = cvals->rx_max_coalesced_frames; @@ -358,6 +372,19 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals else priv->txcoalescing = 1; + /* Check the bounds of the values */ + if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) { + pr_info("Coalescing is limited to %d microseconds\n", + GFAR_MAX_COAL_USECS); + return -EINVAL; + } + + if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) { + pr_info("Coalescing is limited to %d frames\n", + GFAR_MAX_COAL_FRAMES); + return -EINVAL; + } + priv->txtime = gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs); priv->txcount = cvals->tx_max_coalesced_frames; @@ -536,6 +563,7 @@ static void gfar_set_msglevel(struct net_device *dev, uint32_t data) struct ethtool_ops gfar_ethtool_ops = { .get_settings = gfar_gsettings, + .set_settings = gfar_ssettings, .get_drvinfo = gfar_gdrvinfo, .get_regs_len = gfar_reglen, .get_regs = gfar_get_regs, diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c new file mode 100644 index 000000000000..1eca1dbca7f1 --- /dev/null +++ b/drivers/net/gianfar_mii.c @@ -0,0 +1,219 @@ +/* + * drivers/net/gianfar_mii.c + * + * Gianfar Ethernet Driver -- MIIM bus implementation + * Provides Bus interface for MIIM regs + * + * Author: Andy Fleming + * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * + * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "gianfar.h" +#include "gianfar_mii.h" + +/* Write value to the PHY at mii_id at register regnum, + * on the bus, waiting until the write is done before returning. + * All PHY configuration is done through the TSEC1 MIIM regs */ +int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) +{ + struct gfar_mii *regs = bus->priv; + + /* Set the PHY address and the register address we want to write */ + gfar_write(®s->miimadd, (mii_id << 8) | regnum); + + /* Write out the value we want */ + gfar_write(®s->miimcon, value); + + /* Wait for the transaction to finish */ + while (gfar_read(®s->miimind) & MIIMIND_BUSY) + cpu_relax(); + + return 0; +} + +/* Read the bus for PHY at addr mii_id, register regnum, and + * return the value. Clears miimcom first. All PHY + * configuration has to be done through the TSEC1 MIIM regs */ +int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +{ + struct gfar_mii *regs = bus->priv; + u16 value; + + /* Set the PHY address and the register address we want to read */ + gfar_write(®s->miimadd, (mii_id << 8) | regnum); + + /* Clear miimcom, and then initiate a read */ + gfar_write(®s->miimcom, 0); + gfar_write(®s->miimcom, MII_READ_COMMAND); + + /* Wait for the transaction to finish */ + while (gfar_read(®s->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) + cpu_relax(); + + /* Grab the value of the register from miimstat */ + value = gfar_read(®s->miimstat); + + return value; +} + + +/* Reset the MIIM registers, and wait for the bus to free */ +int gfar_mdio_reset(struct mii_bus *bus) +{ + struct gfar_mii *regs = bus->priv; + unsigned int timeout = PHY_INIT_TIMEOUT; + + spin_lock_bh(&bus->mdio_lock); + + /* Reset the management interface */ + gfar_write(®s->miimcfg, MIIMCFG_RESET); + + /* Setup the MII Mgmt clock speed */ + gfar_write(®s->miimcfg, MIIMCFG_INIT_VALUE); + + /* Wait until the bus is free */ + while ((gfar_read(®s->miimind) & MIIMIND_BUSY) && + timeout--) + cpu_relax(); + + spin_unlock_bh(&bus->mdio_lock); + + if(timeout <= 0) { + printk(KERN_ERR "%s: The MII Bus is stuck!\n", + bus->name); + return -EBUSY; + } + + return 0; +} + + +int gfar_mdio_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gianfar_mdio_data *pdata; + struct gfar_mii *regs; + struct mii_bus *new_bus; + int err = 0; + + if (NULL == dev) + return -EINVAL; + + new_bus = kmalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (NULL == new_bus) + return -ENOMEM; + + new_bus->name = "Gianfar MII Bus", + new_bus->read = &gfar_mdio_read, + new_bus->write = &gfar_mdio_write, + new_bus->reset = &gfar_mdio_reset, + new_bus->id = pdev->id; + + pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data; + + if (NULL == pdata) { + printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id); + return -ENODEV; + } + + /* Set the PHY base address */ + regs = (struct gfar_mii *) ioremap(pdata->paddr, + sizeof (struct gfar_mii)); + + if (NULL == regs) { + err = -ENOMEM; + goto reg_map_fail; + } + + new_bus->priv = regs; + + new_bus->irq = pdata->irq; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + err = mdiobus_register(new_bus); + + if (0 != err) { + printk (KERN_ERR "%s: Cannot register as MDIO bus\n", + new_bus->name); + goto bus_register_fail; + } + + return 0; + +bus_register_fail: + iounmap((void *) regs); +reg_map_fail: + kfree(new_bus); + + return err; +} + + +int gfar_mdio_remove(struct device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(dev, NULL); + + iounmap((void *) (&bus->priv)); + bus->priv = NULL; + kfree(bus); + + return 0; +} + +static struct device_driver gianfar_mdio_driver = { + .name = "fsl-gianfar_mdio", + .bus = &platform_bus_type, + .probe = gfar_mdio_probe, + .remove = gfar_mdio_remove, +}; + +int __init gfar_mdio_init(void) +{ + return driver_register(&gianfar_mdio_driver); +} + +void __exit gfar_mdio_exit(void) +{ + driver_unregister(&gianfar_mdio_driver); +} diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h new file mode 100644 index 000000000000..56e5665d5c9b --- /dev/null +++ b/drivers/net/gianfar_mii.h @@ -0,0 +1,45 @@ +/* + * drivers/net/gianfar_mii.h + * + * Gianfar Ethernet Driver -- MII Management Bus Implementation + * Driver for the MDIO bus controller in the Gianfar register space + * + * Author: Andy Fleming + * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * + * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __GIANFAR_MII_H +#define __GIANFAR_MII_H + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +#define MII_READ_COMMAND 0x00000001 + +#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \ + | SUPPORTED_100baseT_Half \ + | SUPPORTED_100baseT_Full \ + | SUPPORTED_Autoneg \ + | SUPPORTED_MII) + +struct gfar_mii { + u32 miimcfg; /* 0x.520 - MII Management Config Register */ + u32 miimcom; /* 0x.524 - MII Management Command Register */ + u32 miimadd; /* 0x.528 - MII Management Address Register */ + u32 miimcon; /* 0x.52c - MII Management Control Register */ + u32 miimstat; /* 0x.530 - MII Management Status Register */ + u32 miimind; /* 0x.534 - MII Management Indicator Register */ +}; + +int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum); +int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); +int __init gfar_mdio_init(void); +void __exit gfar_mdio_exit(void); +#endif /* GIANFAR_PHY_H */ diff --git a/drivers/net/gianfar_phy.c b/drivers/net/gianfar_phy.c deleted file mode 100644 index 7c965f268a82..000000000000 --- a/drivers/net/gianfar_phy.c +++ /dev/null @@ -1,661 +0,0 @@ -/* - * drivers/net/gianfar_phy.c - * - * Gianfar Ethernet Driver -- PHY handling - * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560 - * Based on 8260_io/fcc_enet.c - * - * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) - * - * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "gianfar.h" -#include "gianfar_phy.h" - -static void config_genmii_advert(struct gfar_mii_info *mii_info); -static void genmii_setup_forced(struct gfar_mii_info *mii_info); -static void genmii_restart_aneg(struct gfar_mii_info *mii_info); -static int gbit_config_aneg(struct gfar_mii_info *mii_info); -static int genmii_config_aneg(struct gfar_mii_info *mii_info); -static int genmii_update_link(struct gfar_mii_info *mii_info); -static int genmii_read_status(struct gfar_mii_info *mii_info); -u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum); -void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val); - -/* Write value to the PHY for this device to the register at regnum, */ -/* waiting until the write is done before it returns. All PHY */ -/* configuration has to be done through the TSEC1 MIIM regs */ -void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value) -{ - struct gfar_private *priv = netdev_priv(dev); - struct gfar *regbase = priv->phyregs; - - /* Set the PHY address and the register address we want to write */ - gfar_write(®base->miimadd, (mii_id << 8) | regnum); - - /* Write out the value we want */ - gfar_write(®base->miimcon, value); - - /* Wait for the transaction to finish */ - while (gfar_read(®base->miimind) & MIIMIND_BUSY) - cpu_relax(); -} - -/* Reads from register regnum in the PHY for device dev, */ -/* returning the value. Clears miimcom first. All PHY */ -/* configuration has to be done through the TSEC1 MIIM regs */ -int read_phy_reg(struct net_device *dev, int mii_id, int regnum) -{ - struct gfar_private *priv = netdev_priv(dev); - struct gfar *regbase = priv->phyregs; - u16 value; - - /* Set the PHY address and the register address we want to read */ - gfar_write(®base->miimadd, (mii_id << 8) | regnum); - - /* Clear miimcom, and then initiate a read */ - gfar_write(®base->miimcom, 0); - gfar_write(®base->miimcom, MII_READ_COMMAND); - - /* Wait for the transaction to finish */ - while (gfar_read(®base->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) - cpu_relax(); - - /* Grab the value of the register from miimstat */ - value = gfar_read(®base->miimstat); - - return value; -} - -void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info) -{ - if(mii_info->phyinfo->ack_interrupt) - mii_info->phyinfo->ack_interrupt(mii_info); -} - - -void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts) -{ - mii_info->interrupts = interrupts; - if(mii_info->phyinfo->config_intr) - mii_info->phyinfo->config_intr(mii_info); -} - - -/* Writes MII_ADVERTISE with the appropriate values, after - * sanitizing advertise to make sure only supported features - * are advertised - */ -static void config_genmii_advert(struct gfar_mii_info *mii_info) -{ - u32 advertise; - u16 adv; - - /* Only allow advertising what this PHY supports */ - mii_info->advertising &= mii_info->phyinfo->features; - advertise = mii_info->advertising; - - /* Setup standard advertisement */ - adv = phy_read(mii_info, MII_ADVERTISE); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); - if (advertise & ADVERTISED_10baseT_Half) - adv |= ADVERTISE_10HALF; - if (advertise & ADVERTISED_10baseT_Full) - adv |= ADVERTISE_10FULL; - if (advertise & ADVERTISED_100baseT_Half) - adv |= ADVERTISE_100HALF; - if (advertise & ADVERTISED_100baseT_Full) - adv |= ADVERTISE_100FULL; - phy_write(mii_info, MII_ADVERTISE, adv); -} - -static void genmii_setup_forced(struct gfar_mii_info *mii_info) -{ - u16 ctrl; - u32 features = mii_info->phyinfo->features; - - ctrl = phy_read(mii_info, MII_BMCR); - - ctrl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPEED1000|BMCR_ANENABLE); - ctrl |= BMCR_RESET; - - switch(mii_info->speed) { - case SPEED_1000: - if(features & (SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full)) { - ctrl |= BMCR_SPEED1000; - break; - } - mii_info->speed = SPEED_100; - case SPEED_100: - if (features & (SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full)) { - ctrl |= BMCR_SPEED100; - break; - } - mii_info->speed = SPEED_10; - case SPEED_10: - if (features & (SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full)) - break; - default: /* Unsupported speed! */ - printk(KERN_ERR "%s: Bad speed!\n", - mii_info->dev->name); - break; - } - - phy_write(mii_info, MII_BMCR, ctrl); -} - - -/* Enable and Restart Autonegotiation */ -static void genmii_restart_aneg(struct gfar_mii_info *mii_info) -{ - u16 ctl; - - ctl = phy_read(mii_info, MII_BMCR); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write(mii_info, MII_BMCR, ctl); -} - - -static int gbit_config_aneg(struct gfar_mii_info *mii_info) -{ - u16 adv; - u32 advertise; - - if(mii_info->autoneg) { - /* Configure the ADVERTISE register */ - config_genmii_advert(mii_info); - advertise = mii_info->advertising; - - adv = phy_read(mii_info, MII_1000BASETCONTROL); - adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP | - MII_1000BASETCONTROL_HALFDUPLEXCAP); - if (advertise & SUPPORTED_1000baseT_Half) - adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP; - if (advertise & SUPPORTED_1000baseT_Full) - adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP; - phy_write(mii_info, MII_1000BASETCONTROL, adv); - - /* Start/Restart aneg */ - genmii_restart_aneg(mii_info); - } else - genmii_setup_forced(mii_info); - - return 0; -} - -static int marvell_config_aneg(struct gfar_mii_info *mii_info) -{ - /* The Marvell PHY has an errata which requires - * that certain registers get written in order - * to restart autonegotiation */ - phy_write(mii_info, MII_BMCR, BMCR_RESET); - - phy_write(mii_info, 0x1d, 0x1f); - phy_write(mii_info, 0x1e, 0x200c); - phy_write(mii_info, 0x1d, 0x5); - phy_write(mii_info, 0x1e, 0); - phy_write(mii_info, 0x1e, 0x100); - - gbit_config_aneg(mii_info); - - return 0; -} -static int genmii_config_aneg(struct gfar_mii_info *mii_info) -{ - if (mii_info->autoneg) { - config_genmii_advert(mii_info); - genmii_restart_aneg(mii_info); - } else - genmii_setup_forced(mii_info); - - return 0; -} - - -static int genmii_update_link(struct gfar_mii_info *mii_info) -{ - u16 status; - - /* Do a fake read */ - phy_read(mii_info, MII_BMSR); - - /* Read link and autonegotiation status */ - status = phy_read(mii_info, MII_BMSR); - if ((status & BMSR_LSTATUS) == 0) - mii_info->link = 0; - else - mii_info->link = 1; - - /* If we are autonegotiating, and not done, - * return an error */ - if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE)) - return -EAGAIN; - - return 0; -} - -static int genmii_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - if (mii_info->autoneg) { - status = phy_read(mii_info, MII_LPA); - - if (status & (LPA_10FULL | LPA_100FULL)) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - if (status & (LPA_100FULL | LPA_100HALF)) - mii_info->speed = SPEED_100; - else - mii_info->speed = SPEED_10; - mii_info->pause = 0; - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ - - return 0; -} -static int marvell_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - int speed; - status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); - -#if 0 - /* If speed and duplex aren't resolved, - * return an error. Isn't this handled - * by checking aneg? - */ - if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0) - return -EAGAIN; -#endif - - /* Get the duplexity */ - if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - - /* Get the speed */ - speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK; - switch(speed) { - case MII_M1011_PHY_SPEC_STATUS_1000: - mii_info->speed = SPEED_1000; - break; - case MII_M1011_PHY_SPEC_STATUS_100: - mii_info->speed = SPEED_100; - break; - default: - mii_info->speed = SPEED_10; - break; - } - mii_info->pause = 0; - } - - return 0; -} - - -static int cis820x_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - int speed; - - status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT); - if (status & MII_CIS8201_AUXCONSTAT_DUPLEX) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - - speed = status & MII_CIS8201_AUXCONSTAT_SPEED; - - switch (speed) { - case MII_CIS8201_AUXCONSTAT_GBIT: - mii_info->speed = SPEED_1000; - break; - case MII_CIS8201_AUXCONSTAT_100: - mii_info->speed = SPEED_100; - break; - default: - mii_info->speed = SPEED_10; - break; - } - } - - return 0; -} - -static int marvell_ack_interrupt(struct gfar_mii_info *mii_info) -{ - /* Clear the interrupts by reading the reg */ - phy_read(mii_info, MII_M1011_IEVENT); - - return 0; -} - -static int marvell_config_intr(struct gfar_mii_info *mii_info) -{ - if(mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); - else - phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); - - return 0; -} - -static int cis820x_init(struct gfar_mii_info *mii_info) -{ - phy_write(mii_info, MII_CIS8201_AUX_CONSTAT, - MII_CIS8201_AUXCONSTAT_INIT); - phy_write(mii_info, MII_CIS8201_EXT_CON1, - MII_CIS8201_EXTCON1_INIT); - - return 0; -} - -static int cis820x_ack_interrupt(struct gfar_mii_info *mii_info) -{ - phy_read(mii_info, MII_CIS8201_ISTAT); - - return 0; -} - -static int cis820x_config_intr(struct gfar_mii_info *mii_info) -{ - if(mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK); - else - phy_write(mii_info, MII_CIS8201_IMASK, 0); - - return 0; -} - -#define DM9161_DELAY 10 - -static int dm9161_read_status(struct gfar_mii_info *mii_info) -{ - u16 status; - int err; - - /* Update the link, but return if there - * was an error */ - err = genmii_update_link(mii_info); - if (err) - return err; - - /* If the link is up, read the speed and duplex */ - /* If we aren't autonegotiating, assume speeds - * are as set */ - if (mii_info->autoneg && mii_info->link) { - status = phy_read(mii_info, MII_DM9161_SCSR); - if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) - mii_info->speed = SPEED_100; - else - mii_info->speed = SPEED_10; - - if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F)) - mii_info->duplex = DUPLEX_FULL; - else - mii_info->duplex = DUPLEX_HALF; - } - - return 0; -} - - -static int dm9161_config_aneg(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv = mii_info->priv; - - if(0 == priv->resetdone) - return -EAGAIN; - - return 0; -} - -static void dm9161_timer(unsigned long data) -{ - struct gfar_mii_info *mii_info = (struct gfar_mii_info *)data; - struct dm9161_private *priv = mii_info->priv; - u16 status = phy_read(mii_info, MII_BMSR); - - if (status & BMSR_ANEGCOMPLETE) { - priv->resetdone = 1; - } else - mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); -} - -static int dm9161_init(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv; - - /* Allocate the private data structure */ - priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL); - - if (NULL == priv) - return -ENOMEM; - - mii_info->priv = priv; - - /* Reset is not done yet */ - priv->resetdone = 0; - - /* Isolate the PHY */ - phy_write(mii_info, MII_BMCR, BMCR_ISOLATE); - - /* Do not bypass the scrambler/descrambler */ - phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); - - /* Clear 10BTCSR to default */ - phy_write(mii_info, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT); - - /* Reconnect the PHY, and enable Autonegotiation */ - phy_write(mii_info, MII_BMCR, BMCR_ANENABLE); - - /* Start a timer for DM9161_DELAY seconds to wait - * for the PHY to be ready */ - init_timer(&priv->timer); - priv->timer.function = &dm9161_timer; - priv->timer.data = (unsigned long) mii_info; - mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ); - - return 0; -} - -static void dm9161_close(struct gfar_mii_info *mii_info) -{ - struct dm9161_private *priv = mii_info->priv; - - del_timer_sync(&priv->timer); - kfree(priv); -} - -#if 0 -static int dm9161_ack_interrupt(struct gfar_mii_info *mii_info) -{ - phy_read(mii_info, MII_DM9161_INTR); - - return 0; -} -#endif - -/* Cicada 820x */ -static struct phy_info phy_info_cis820x = { - 0x000fc440, - "Cicada Cis8204", - 0x000fffc0, - .features = MII_GBIT_FEATURES, - .init = &cis820x_init, - .config_aneg = &gbit_config_aneg, - .read_status = &cis820x_read_status, - .ack_interrupt = &cis820x_ack_interrupt, - .config_intr = &cis820x_config_intr, -}; - -static struct phy_info phy_info_dm9161 = { - .phy_id = 0x0181b880, - .name = "Davicom DM9161E", - .phy_id_mask = 0x0ffffff0, - .init = dm9161_init, - .config_aneg = dm9161_config_aneg, - .read_status = dm9161_read_status, - .close = dm9161_close, -}; - -static struct phy_info phy_info_marvell = { - .phy_id = 0x01410c00, - .phy_id_mask = 0xffffff00, - .name = "Marvell 88E1101/88E1111", - .features = MII_GBIT_FEATURES, - .config_aneg = &marvell_config_aneg, - .read_status = &marvell_read_status, - .ack_interrupt = &marvell_ack_interrupt, - .config_intr = &marvell_config_intr, -}; - -static struct phy_info phy_info_genmii= { - .phy_id = 0x00000000, - .phy_id_mask = 0x00000000, - .name = "Generic MII", - .features = MII_BASIC_FEATURES, - .config_aneg = genmii_config_aneg, - .read_status = genmii_read_status, -}; - -static struct phy_info *phy_info[] = { - &phy_info_cis820x, - &phy_info_marvell, - &phy_info_dm9161, - &phy_info_genmii, - NULL -}; - -u16 phy_read(struct gfar_mii_info *mii_info, u16 regnum) -{ - u16 retval; - unsigned long flags; - - spin_lock_irqsave(&mii_info->mdio_lock, flags); - retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum); - spin_unlock_irqrestore(&mii_info->mdio_lock, flags); - - return retval; -} - -void phy_write(struct gfar_mii_info *mii_info, u16 regnum, u16 val) -{ - unsigned long flags; - - spin_lock_irqsave(&mii_info->mdio_lock, flags); - mii_info->mdio_write(mii_info->dev, - mii_info->mii_id, - regnum, val); - spin_unlock_irqrestore(&mii_info->mdio_lock, flags); -} - -/* Use the PHY ID registers to determine what type of PHY is attached - * to device dev. return a struct phy_info structure describing that PHY - */ -struct phy_info * get_phy_info(struct gfar_mii_info *mii_info) -{ - u16 phy_reg; - u32 phy_ID; - int i; - struct phy_info *theInfo = NULL; - struct net_device *dev = mii_info->dev; - - /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = phy_read(mii_info, MII_PHYSID1); - phy_ID = (phy_reg & 0xffff) << 16; - - /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = phy_read(mii_info, MII_PHYSID2); - phy_ID |= (phy_reg & 0xffff); - - /* loop through all the known PHY types, and find one that */ - /* matches the ID we read from the PHY. */ - for (i = 0; phy_info[i]; i++) - if (phy_info[i]->phy_id == - (phy_ID & phy_info[i]->phy_id_mask)) { - theInfo = phy_info[i]; - break; - } - - /* This shouldn't happen, as we have generic PHY support */ - if (theInfo == NULL) { - printk("%s: PHY id %x is not supported!\n", dev->name, phy_ID); - return NULL; - } else { - printk("%s: PHY is %s (%x)\n", dev->name, theInfo->name, - phy_ID); - } - - return theInfo; -} diff --git a/drivers/net/gianfar_phy.h b/drivers/net/gianfar_phy.h deleted file mode 100644 index 1e9b3abf1e6d..000000000000 --- a/drivers/net/gianfar_phy.h +++ /dev/null @@ -1,213 +0,0 @@ -/* - * drivers/net/gianfar_phy.h - * - * Gianfar Ethernet Driver -- PHY handling - * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560 - * Based on 8260_io/fcc_enet.c - * - * Author: Andy Fleming - * Maintainer: Kumar Gala (kumar.gala@freescale.com) - * - * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifndef __GIANFAR_PHY_H -#define __GIANFAR_PHY_H - -#define MII_end ((u32)-2) -#define MII_read ((u32)-1) - -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 - -#define GFAR_AN_TIMEOUT 2000 - -/* 1000BT control (Marvell & BCM54xx at least) */ -#define MII_1000BASETCONTROL 0x09 -#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 -#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 - -/* Cicada Extended Control Register 1 */ -#define MII_CIS8201_EXT_CON1 0x17 -#define MII_CIS8201_EXTCON1_INIT 0x0000 - -/* Cicada Interrupt Mask Register */ -#define MII_CIS8201_IMASK 0x19 -#define MII_CIS8201_IMASK_IEN 0x8000 -#define MII_CIS8201_IMASK_SPEED 0x4000 -#define MII_CIS8201_IMASK_LINK 0x2000 -#define MII_CIS8201_IMASK_DUPLEX 0x1000 -#define MII_CIS8201_IMASK_MASK 0xf000 - -/* Cicada Interrupt Status Register */ -#define MII_CIS8201_ISTAT 0x1a -#define MII_CIS8201_ISTAT_STATUS 0x8000 -#define MII_CIS8201_ISTAT_SPEED 0x4000 -#define MII_CIS8201_ISTAT_LINK 0x2000 -#define MII_CIS8201_ISTAT_DUPLEX 0x1000 - -/* Cicada Auxiliary Control/Status Register */ -#define MII_CIS8201_AUX_CONSTAT 0x1c -#define MII_CIS8201_AUXCONSTAT_INIT 0x0004 -#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 -#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 -#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010 -#define MII_CIS8201_AUXCONSTAT_100 0x0008 - -/* 88E1011 PHY Status Register */ -#define MII_M1011_PHY_SPEC_STATUS 0x11 -#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 -#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 -#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 -#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 -#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 -#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 - -#define MII_M1011_IEVENT 0x13 -#define MII_M1011_IEVENT_CLEAR 0x0000 - -#define MII_M1011_IMASK 0x12 -#define MII_M1011_IMASK_INIT 0x6400 -#define MII_M1011_IMASK_CLEAR 0x0000 - -#define MII_DM9161_SCR 0x10 -#define MII_DM9161_SCR_INIT 0x0610 - -/* DM9161 Specified Configuration and Status Register */ -#define MII_DM9161_SCSR 0x11 -#define MII_DM9161_SCSR_100F 0x8000 -#define MII_DM9161_SCSR_100H 0x4000 -#define MII_DM9161_SCSR_10F 0x2000 -#define MII_DM9161_SCSR_10H 0x1000 - -/* DM9161 Interrupt Register */ -#define MII_DM9161_INTR 0x15 -#define MII_DM9161_INTR_PEND 0x8000 -#define MII_DM9161_INTR_DPLX_MASK 0x0800 -#define MII_DM9161_INTR_SPD_MASK 0x0400 -#define MII_DM9161_INTR_LINK_MASK 0x0200 -#define MII_DM9161_INTR_MASK 0x0100 -#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 -#define MII_DM9161_INTR_SPD_CHANGE 0x0008 -#define MII_DM9161_INTR_LINK_CHANGE 0x0004 -#define MII_DM9161_INTR_INIT 0x0000 -#define MII_DM9161_INTR_STOP \ -(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ - | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) - -/* DM9161 10BT Configuration/Status */ -#define MII_DM9161_10BTCSR 0x12 -#define MII_DM9161_10BTCSR_INIT 0x7800 - -#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ - SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | \ - SUPPORTED_100baseT_Full | \ - SUPPORTED_Autoneg | \ - SUPPORTED_TP | \ - SUPPORTED_MII) - -#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ - SUPPORTED_1000baseT_Half | \ - SUPPORTED_1000baseT_Full) - -#define MII_READ_COMMAND 0x00000001 - -#define MII_INTERRUPT_DISABLED 0x0 -#define MII_INTERRUPT_ENABLED 0x1 -/* Taken from mii_if_info and sungem_phy.h */ -struct gfar_mii_info { - /* Information about the PHY type */ - /* And management functions */ - struct phy_info *phyinfo; - - /* forced speed & duplex (no autoneg) - * partner speed & duplex & pause (autoneg) - */ - int speed; - int duplex; - int pause; - - /* The most recently read link state */ - int link; - - /* Enabled Interrupts */ - u32 interrupts; - - u32 advertising; - int autoneg; - int mii_id; - - /* private data pointer */ - /* For use by PHYs to maintain extra state */ - void *priv; - - /* Provided by host chip */ - struct net_device *dev; - - /* A lock to ensure that only one thing can read/write - * the MDIO bus at a time */ - spinlock_t mdio_lock; - - /* Provided by ethernet driver */ - int (*mdio_read) (struct net_device *dev, int mii_id, int reg); - void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val); -}; - -/* struct phy_info: a structure which defines attributes for a PHY - * - * id will contain a number which represents the PHY. During - * startup, the driver will poll the PHY to find out what its - * UID--as defined by registers 2 and 3--is. The 32-bit result - * gotten from the PHY will be ANDed with phy_id_mask to - * discard any bits which may change based on revision numbers - * unimportant to functionality - * - * There are 6 commands which take a gfar_mii_info structure. - * Each PHY must declare config_aneg, and read_status. - */ -struct phy_info { - u32 phy_id; - char *name; - unsigned int phy_id_mask; - u32 features; - - /* Called to initialize the PHY */ - int (*init)(struct gfar_mii_info *mii_info); - - /* Called to suspend the PHY for power */ - int (*suspend)(struct gfar_mii_info *mii_info); - - /* Reconfigures autonegotiation (or disables it) */ - int (*config_aneg)(struct gfar_mii_info *mii_info); - - /* Determines the negotiated speed and duplex */ - int (*read_status)(struct gfar_mii_info *mii_info); - - /* Clears any pending interrupts */ - int (*ack_interrupt)(struct gfar_mii_info *mii_info); - - /* Enables or disables interrupts */ - int (*config_intr)(struct gfar_mii_info *mii_info); - - /* Clears up any memory if needed */ - void (*close)(struct gfar_mii_info *mii_info); -}; - -struct phy_info *get_phy_info(struct gfar_mii_info *mii_info); -int read_phy_reg(struct net_device *dev, int mii_id, int regnum); -void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value); -void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info); -void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts); - -struct dm9161_private { - struct timer_list timer; - int resetdone; -}; - -#endif /* GIANFAR_PHY_H */ -- GitLab From 8cee0cd5bec53b78dd3c43a73b27821a688133e6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 23 Sep 2005 22:58:49 -0400 Subject: [PATCH 0145/1519] [netdrvr] delete CONFIG_PHYCONTROL --- drivers/net/Kconfig | 1 - drivers/net/phy/Kconfig | 8 -------- drivers/net/phy/phy.c | 8 -------- drivers/net/phy/phy_device.c | 3 --- 4 files changed, 20 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4739a63601eb..db8898100325 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2076,7 +2076,6 @@ config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx select PHYLIB - select PHYCONTROL help This driver supports the Gigabit TSEC on the MPC85xx family of chips, and the FEC on the 8540 diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 14f4de1a8180..c782a6329805 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -12,14 +12,6 @@ config PHYLIB devices. This option provides infrastructure for managing PHY devices. -config PHYCONTROL - bool " Support for automatically handling PHY state changes" - depends on PHYLIB - help - Adds code to perform all the work for keeping PHY link - state (speed/duplex/etc) up-to-date. Also handles - interrupts. - comment "MII PHY device drivers" depends on PHYLIB diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d9e11f93bf3a..9209da9dde0d 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -242,10 +242,6 @@ EXPORT_SYMBOL(phy_sanitize_settings); * choose the next best ones from the ones selected, so we don't * care if ethtool tries to give us bad values * - * A note about the PHYCONTROL Layer. If you turn off - * CONFIG_PHYCONTROL, you will need to read the PHY status - * registers after this function completes, and update your - * controller manually. */ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd) { @@ -380,7 +376,6 @@ int phy_start_aneg(struct phy_device *phydev) err = phydev->drv->config_aneg(phydev); -#ifdef CONFIG_PHYCONTROL if (err < 0) goto out_unlock; @@ -395,14 +390,12 @@ int phy_start_aneg(struct phy_device *phydev) } out_unlock: -#endif spin_unlock(&phydev->lock); return err; } EXPORT_SYMBOL(phy_start_aneg); -#ifdef CONFIG_PHYCONTROL static void phy_change(void *data); static void phy_timer(unsigned long data); @@ -868,4 +861,3 @@ static void phy_timer(unsigned long data) mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ); } -#endif /* CONFIG_PHYCONTROL */ diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 33f7bdb5857c..6da1aa0706a1 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -101,7 +101,6 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) return dev; } -#ifdef CONFIG_PHYCONTROL /* phy_prepare_link: * * description: Tells the PHY infrastructure to handle the @@ -160,8 +159,6 @@ void phy_disconnect(struct phy_device *phydev) } EXPORT_SYMBOL(phy_disconnect); -#endif /* CONFIG_PHYCONTROL */ - /* phy_attach: * * description: Called by drivers to attach to a particular PHY -- GitLab From 7a716536c602be6050b4f3ece30f1fc3b64362b0 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 23 Sep 2005 21:58:58 -0700 Subject: [PATCH 0146/1519] [PATCH] hostap: Fix pci_driver name for hostap_plx and hostap_pci hostap_pci and hostap_plx drivers still use PCI driver names "prism2_pci" and "prism2_plx" respectively. This is unfriendly to linux-wlan-ng, which uses the same names. So, if e.g. hostap_pci and prism2_pci are loaded, they will "share" /sys/bus/pci/drivers/prism2_plx directory. Change PCI driver names of hostap_pci and hostap_plx to be equal to their module names. Signed-off-by: Pavel Roskin Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_pci.c | 2 +- drivers/net/wireless/hostap/hostap_plx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index 025f8cdb5566..b9254f73fbaf 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -441,7 +441,7 @@ static int prism2_pci_resume(struct pci_dev *pdev) MODULE_DEVICE_TABLE(pci, prism2_pci_id_table); static struct pci_driver prism2_pci_drv_id = { - .name = "prism2_pci", + .name = "hostap_pci", .id_table = prism2_pci_id_table, .probe = prism2_pci_probe, .remove = prism2_pci_remove, diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 474ef83d813e..1abebdf48b20 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -616,7 +616,7 @@ static void prism2_plx_remove(struct pci_dev *pdev) MODULE_DEVICE_TABLE(pci, prism2_plx_id_table); static struct pci_driver prism2_plx_drv_id = { - .name = "prism2_plx", + .name = "hostap_plx", .id_table = prism2_plx_id_table, .probe = prism2_plx_probe, .remove = prism2_plx_remove, -- GitLab From c28df16ed70d1b6cefd12135e3c68bfccd1bb635 Mon Sep 17 00:00:00 2001 From: Jean Tourrilhes Date: Fri, 23 Sep 2005 21:58:59 -0700 Subject: [PATCH 0147/1519] [PATCH] hostap: Add support for WE-19 This patch adds support for WE-19 to the HostAP driver. One of the major change is the use of an explicit flag to tell if iwstat is in dBm or not. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_80211_rx.c | 3 ++- drivers/net/wireless/hostap/hostap_ap.c | 6 +++--- drivers/net/wireless/hostap/hostap_ioctl.c | 9 +++++++-- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index 42e61c68c325..ffac50899454 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -737,7 +737,8 @@ void hostap_80211_rx(struct net_device *dev, struct sk_buff *skb, struct iw_quality wstats; wstats.level = rx_stats->signal; wstats.noise = rx_stats->noise; - wstats.updated = 6; /* No qual value */ + wstats.updated = IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_UPDATED + | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM; /* Update spy records */ wireless_spy_update(dev, hdr->addr2, &wstats); } diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 087d9269af34..9da94ab7f05f 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -2349,7 +2349,7 @@ static int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence); qual[count].updated = sta->last_rx_updated; - sta->last_rx_updated = 0; + sta->last_rx_updated = IW_QUAL_DBM; count++; if (count >= buf_size) @@ -2467,7 +2467,7 @@ static int prism2_ap_translate_scan(struct net_device *dev, char *buffer) } #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - sta->last_rx_updated = 0; + sta->last_rx_updated = IW_QUAL_DBM; /* To be continued, we should make good use of IWEVCUSTOM */ } @@ -3174,7 +3174,7 @@ int hostap_update_rx_stats(struct ap_data *ap, sta->last_rx_silence = rx_stats->noise; sta->last_rx_signal = rx_stats->signal; sta->last_rx_rate = rx_stats->rate; - sta->last_rx_updated = 7; + sta->last_rx_updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; if (rx_stats->rate == 10) sta->rx_count[0]++; else if (rx_stats->rate == 20) diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index e720369a3515..dd9817261a3a 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -50,7 +50,8 @@ static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) #endif /* in_atomic */ if (update && prism2_update_comms_qual(dev) == 0) - wstats->qual.updated = 7; + wstats->qual.updated = IW_QUAL_ALL_UPDATED | + IW_QUAL_DBM; wstats->qual.qual = local->comms_qual; wstats->qual.level = local->avg_signal; @@ -59,7 +60,7 @@ static struct iw_statistics *hostap_get_wireless_stats(struct net_device *dev) wstats->qual.qual = 0; wstats->qual.level = 0; wstats->qual.noise = 0; - wstats->qual.updated = 0; + wstats->qual.updated = IW_QUAL_ALL_INVALID; } return wstats; @@ -1894,6 +1895,10 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(le16_to_cpu(scan->anl)); } + iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED + | IW_QUAL_QUAL_INVALID + | IW_QUAL_DBM; iwe.len = IW_EV_QUAL_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); -- GitLab From a9d12b9a4afcfa2cb6f6e76beb4f185a9177c98e Mon Sep 17 00:00:00 2001 From: Jean Tourrilhes Date: Fri, 23 Sep 2005 21:59:00 -0700 Subject: [PATCH 0148/1519] [PATCH] hostap: Use GFP_ATOMIC to get rid of weird might_sleep issue This is the trace I got : Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index dd9817261a3a..1764563612a8 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1935,7 +1935,7 @@ static char * __prism2_translate_scan(local_info_t *local, } /* TODO: add BeaconInt,resp_rate,atim into BSS table */ - buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_KERNEL); + buf = kmalloc(MAX_WPA_IE_LEN * 2 + 30, GFP_ATOMIC); if (buf && scan) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVCUSTOM; -- GitLab From 596ff2e7c8db39c700e277f0bc267244be253f5b Mon Sep 17 00:00:00 2001 From: Jean Tourrilhes Date: Fri, 23 Sep 2005 21:59:01 -0700 Subject: [PATCH 0149/1519] [PATCH] hostap: Remove iwe_stream_add_event kludge Now that we are compiling with -fno-strict-aliasing (this is the kernel default), we can drop the following kludge for iwe_stream_add_event(). Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_ioctl.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 1764563612a8..53f5246c40aa 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1828,13 +1828,6 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, bssid, ETH_ALEN); - /* FIX: - * I do not know how this is possible, but iwe_stream_add_event - * seems to re-order memcpy execution so that len is set only - * after copying.. Pre-setting len here "fixes" this, but real - * problems should be solved (after which these iwe.len - * settings could be removed from this function). */ - iwe.len = IW_EV_ADDR_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); @@ -1844,7 +1837,6 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.cmd = SIOCGIWESSID; iwe.u.data.length = ssid_len; iwe.u.data.flags = 1; - iwe.len = IW_EV_POINT_LEN + iwe.u.data.length; current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ssid); memset(&iwe, 0, sizeof(iwe)); @@ -1860,7 +1852,6 @@ static char * __prism2_translate_scan(local_info_t *local, iwe.u.mode = IW_MODE_MASTER; else iwe.u.mode = IW_MODE_ADHOC; - iwe.len = IW_EV_UINT_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); } @@ -1878,7 +1869,6 @@ static char * __prism2_translate_scan(local_info_t *local, if (chan > 0) { iwe.u.freq.m = freq_list[le16_to_cpu(chan - 1)] * 100000; iwe.u.freq.e = 1; - iwe.len = IW_EV_FREQ_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); } @@ -1899,7 +1889,6 @@ static char * __prism2_translate_scan(local_info_t *local, | IW_QUAL_NOISE_UPDATED | IW_QUAL_QUAL_INVALID | IW_QUAL_DBM; - iwe.len = IW_EV_QUAL_LEN; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); } @@ -1911,7 +1900,6 @@ static char * __prism2_translate_scan(local_info_t *local, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - iwe.len = IW_EV_POINT_LEN + iwe.u.data.length; current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, ""); /* TODO: add SuppRates into BSS table */ -- GitLab From e2e965072564e7aad8df963107677a6d22c41767 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 24 Sep 2005 04:05:52 -0400 Subject: [PATCH 0150/1519] Remove WIRELESS_EXT ifdefs from several wireless drivers. --- drivers/net/wireless/airo.c | 17 -- drivers/net/wireless/netwave_cs.c | 185 ---------------------- drivers/net/wireless/prism54/isl_ioctl.c | 10 +- drivers/net/wireless/prism54/islpci_dev.c | 4 - drivers/net/wireless/prism54/islpci_dev.h | 2 - drivers/net/wireless/wavelan.c | 8 - drivers/net/wireless/wavelan.p.h | 4 - drivers/net/wireless/wavelan_cs.c | 8 - drivers/net/wireless/wavelan_cs.p.h | 4 - 9 files changed, 1 insertion(+), 241 deletions(-) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 06998c2240d9..a6194955df2c 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -1046,7 +1046,6 @@ static WifiCtlHdr wifictlhdr8023 = { } }; -#ifdef WIRELESS_EXT // Frequency list (map channels to frequencies) static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; @@ -1067,7 +1066,6 @@ typedef struct wep_key_t { /* List of Wireless Handlers (new API) */ static const struct iw_handler_def airo_handler_def; -#endif /* WIRELESS_EXT */ static const char version[] = "airo.c 0.6 (Ben Reed & Javier Achirica)"; @@ -1110,10 +1108,8 @@ static irqreturn_t airo_interrupt( int irq, void* dev_id, struct pt_regs static int airo_thread(void *data); static void timer_func( struct net_device *dev ); static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -#ifdef WIRELESS_EXT static struct iw_statistics *airo_get_wireless_stats (struct net_device *dev); static void airo_read_wireless_stats (struct airo_info *local); -#endif /* WIRELESS_EXT */ #ifdef CISCO_EXT static int readrids(struct net_device *dev, aironet_ioctl *comp); static int writerids(struct net_device *dev, aironet_ioctl *comp); @@ -1187,12 +1183,10 @@ struct airo_info { int fid; } xmit, xmit11; struct net_device *wifidev; -#ifdef WIRELESS_EXT struct iw_statistics wstats; // wireless stats unsigned long scan_timestamp; /* Time started to scan */ struct iw_spy_data spy_data; struct iw_public_data wireless_data; -#endif /* WIRELESS_EXT */ #ifdef MICSUPPORT /* MIC stuff */ struct crypto_tfm *tfm; @@ -2647,9 +2641,7 @@ static void wifi_setup(struct net_device *dev) dev->get_stats = &airo_get_stats; dev->set_mac_address = &airo_set_mac_address; dev->do_ioctl = &airo_ioctl; -#ifdef WIRELESS_EXT dev->wireless_handlers = &airo_handler_def; -#endif /* WIRELESS_EXT */ dev->change_mtu = &airo_change_mtu; dev->open = &airo_open; dev->stop = &airo_close; @@ -2675,9 +2667,7 @@ static struct net_device *init_wifidev(struct airo_info *ai, dev->priv = ethdev->priv; dev->irq = ethdev->irq; dev->base_addr = ethdev->base_addr; -#ifdef WIRELESS_EXT dev->wireless_data = ethdev->wireless_data; -#endif /* WIRELESS_EXT */ memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len); err = register_netdev(dev); if (err<0) { @@ -2755,11 +2745,9 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, dev->set_multicast_list = &airo_set_multicast_list; dev->set_mac_address = &airo_set_mac_address; dev->do_ioctl = &airo_ioctl; -#ifdef WIRELESS_EXT dev->wireless_handlers = &airo_handler_def; ai->wireless_data.spy_data = &ai->spy_data; dev->wireless_data = &ai->wireless_data; -#endif /* WIRELESS_EXT */ dev->change_mtu = &airo_change_mtu; dev->open = &airo_open; dev->stop = &airo_close; @@ -5598,7 +5586,6 @@ static void __exit airo_cleanup_module( void ) remove_proc_entry("aironet", proc_root_driver); } -#ifdef WIRELESS_EXT /* * Initial Wireless Extension code for Aironet driver by : * Jean Tourrilhes - HPL - 17 November 00 @@ -7107,8 +7094,6 @@ static const struct iw_handler_def airo_handler_def = .get_wireless_stats = airo_get_wireless_stats, }; -#endif /* WIRELESS_EXT */ - /* * This defines the configuration part of the Wireless Extensions * Note : irq and spinlock protection will occur in the subroutines @@ -7187,7 +7172,6 @@ static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return rc; } -#ifdef WIRELESS_EXT /* * Get the Wireless stats out of the driver * Note : irq and spinlock protection will occur in the subroutines @@ -7260,7 +7244,6 @@ static struct iw_statistics *airo_get_wireless_stats(struct net_device *dev) return &local->wstats; } -#endif /* WIRELESS_EXT */ #ifdef CISCO_EXT /* diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c index ca6c03c89926..92793b958e32 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/net/wireless/netwave_cs.c @@ -57,9 +57,7 @@ #include #ifdef CONFIG_NET_RADIO #include -#if WIRELESS_EXT > 12 #include -#endif /* WIRELESS_EXT > 12 */ #endif #include @@ -225,10 +223,7 @@ static void update_stats(struct net_device *dev); static struct net_device_stats *netwave_get_stats(struct net_device *dev); /* Wireless extensions */ -#ifdef WIRELESS_EXT static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev); -#endif -static int netwave_ioctl(struct net_device *, struct ifreq *, int); static void set_multicast_list(struct net_device *dev); @@ -260,26 +255,7 @@ static dev_link_t *dev_list; because they generally can't be allocated dynamically. */ -#if WIRELESS_EXT <= 12 -/* Wireless extensions backward compatibility */ - -/* Part of iw_handler prototype we need */ -struct iw_request_info -{ - __u16 cmd; /* Wireless Extension command */ - __u16 flags; /* More to come ;-) */ -}; - -/* Wireless Extension Backward compatibility - Jean II - * If the new wireless device private ioctl range is not defined, - * default to standard device private ioctl range */ -#ifndef SIOCIWFIRSTPRIV -#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE -#endif /* SIOCIWFIRSTPRIV */ - -#else /* WIRELESS_EXT <= 12 */ static const struct iw_handler_def netwave_handler_def; -#endif /* WIRELESS_EXT <= 12 */ #define SIOCGIPSNAP SIOCIWFIRSTPRIV + 1 /* Site Survey Snapshot */ @@ -319,9 +295,7 @@ typedef struct netwave_private { struct timer_list watchdog; /* To avoid blocking state */ struct site_survey nss; struct net_device_stats stats; -#ifdef WIRELESS_EXT struct iw_statistics iw_stats; /* Wireless stats */ -#endif } netwave_private; #ifdef NETWAVE_STATS @@ -353,7 +327,6 @@ static inline void wait_WOC(unsigned int iobase) while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ; } -#ifdef WIRELESS_EXT static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, kio_addr_t iobase) { u_short resultBuffer; @@ -376,9 +349,7 @@ static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, sizeof(struct site_survey)); } } -#endif -#ifdef WIRELESS_EXT /* * Function netwave_get_wireless_stats (dev) * @@ -411,7 +382,6 @@ static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev) return &priv->iw_stats; } -#endif /* * Function netwave_attach (void) @@ -471,13 +441,7 @@ static dev_link_t *netwave_attach(void) dev->get_stats = &netwave_get_stats; dev->set_multicast_list = &set_multicast_list; /* wireless extensions */ -#if WIRELESS_EXT <= 16 - dev->get_wireless_stats = &netwave_get_wireless_stats; -#endif /* WIRELESS_EXT <= 16 */ -#if WIRELESS_EXT > 12 dev->wireless_handlers = (struct iw_handler_def *)&netwave_handler_def; -#endif /* WIRELESS_EXT > 12 */ - dev->do_ioctl = &netwave_ioctl; dev->tx_timeout = &netwave_watchdog; dev->watchdog_timeo = TX_TIMEOUT; @@ -576,13 +540,8 @@ static int netwave_set_nwid(struct net_device *dev, /* Disable interrupts & save flags */ spin_lock_irqsave(&priv->spinlock, flags); -#if WIRELESS_EXT > 8 if(!wrqu->nwid.disabled) { domain = wrqu->nwid.value; -#else /* WIRELESS_EXT > 8 */ - if(wrqu->nwid.on) { - domain = wrqu->nwid.nwid; -#endif /* WIRELESS_EXT > 8 */ printk( KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff); wait_WOC(iobase); @@ -606,15 +565,9 @@ static int netwave_get_nwid(struct net_device *dev, union iwreq_data *wrqu, char *extra) { -#if WIRELESS_EXT > 8 wrqu->nwid.value = domain; wrqu->nwid.disabled = 0; wrqu->nwid.fixed = 1; -#else /* WIRELESS_EXT > 8 */ - wrqu->nwid.nwid = domain; - wrqu->nwid.on = 1; -#endif /* WIRELESS_EXT > 8 */ - return 0; } @@ -657,17 +610,11 @@ static int netwave_get_scramble(struct net_device *dev, { key[1] = scramble_key & 0xff; key[0] = (scramble_key>>8) & 0xff; -#if WIRELESS_EXT > 8 wrqu->encoding.flags = IW_ENCODE_ENABLED; wrqu->encoding.length = 2; -#else /* WIRELESS_EXT > 8 */ - wrqu->encoding.method = 1; -#endif /* WIRELESS_EXT > 8 */ - return 0; } -#if WIRELESS_EXT > 8 /* * Wireless Handler : get mode */ @@ -683,7 +630,6 @@ static int netwave_get_mode(struct net_device *dev, return 0; } -#endif /* WIRELESS_EXT > 8 */ /* * Wireless Handler : get range info @@ -702,11 +648,9 @@ static int netwave_get_range(struct net_device *dev, /* Set all the info we don't care or don't know about to zero */ memset(range, 0, sizeof(struct iw_range)); -#if WIRELESS_EXT > 10 /* Set the Wireless Extension versions */ range->we_version_compiled = WIRELESS_EXT; range->we_version_source = 9; /* Nothing for us in v10 and v11 */ -#endif /* WIRELESS_EXT > 10 */ /* Set information in the range struct */ range->throughput = 450 * 1000; /* don't argue on this ! */ @@ -720,16 +664,12 @@ static int netwave_get_range(struct net_device *dev, range->max_qual.level = 255; range->max_qual.noise = 0; -#if WIRELESS_EXT > 7 range->num_bitrates = 1; range->bitrate[0] = 1000000; /* 1 Mb/s */ -#endif /* WIRELESS_EXT > 7 */ -#if WIRELESS_EXT > 8 range->encoding_size[0] = 2; /* 16 bits scrambling */ range->num_encoding_sizes = 1; range->max_encoding_tokens = 1; /* Only one key possible */ -#endif /* WIRELESS_EXT > 8 */ return ret; } @@ -775,8 +715,6 @@ static const struct iw_priv_args netwave_private_args[] = { "getsitesurvey" }, }; -#if WIRELESS_EXT > 12 - static const iw_handler netwave_handler[] = { NULL, /* SIOCSIWNAME */ @@ -839,131 +777,8 @@ static const struct iw_handler_def netwave_handler_def = .standard = (iw_handler *) netwave_handler, .private = (iw_handler *) netwave_private_handler, .private_args = (struct iw_priv_args *) netwave_private_args, -#if WIRELESS_EXT > 16 .get_wireless_stats = netwave_get_wireless_stats, -#endif /* WIRELESS_EXT > 16 */ }; -#endif /* WIRELESS_EXT > 12 */ - -/* - * Function netwave_ioctl (dev, rq, cmd) - * - * Perform ioctl : config & info stuff - * This is the stuff that are treated the wireless extensions (iwconfig) - * - */ -static int netwave_ioctl(struct net_device *dev, /* ioctl device */ - struct ifreq *rq, /* Data passed */ - int cmd) /* Ioctl number */ -{ - int ret = 0; -#ifdef WIRELESS_EXT -#if WIRELESS_EXT <= 12 - struct iwreq *wrq = (struct iwreq *) rq; -#endif -#endif - - DEBUG(0, "%s: ->netwave_ioctl(cmd=0x%X)\n", dev->name, cmd); - - /* Look what is the request */ - switch(cmd) { - /* --------------- WIRELESS EXTENSIONS --------------- */ -#ifdef WIRELESS_EXT -#if WIRELESS_EXT <= 12 - case SIOCGIWNAME: - netwave_get_name(dev, NULL, &(wrq->u), NULL); - break; - case SIOCSIWNWID: - ret = netwave_set_nwid(dev, NULL, &(wrq->u), NULL); - break; - case SIOCGIWNWID: - ret = netwave_get_nwid(dev, NULL, &(wrq->u), NULL); - break; -#if WIRELESS_EXT > 8 /* Note : The API did change... */ - case SIOCGIWENCODE: - /* Get scramble key */ - if(wrq->u.encoding.pointer != (caddr_t) 0) - { - char key[2]; - ret = netwave_get_scramble(dev, NULL, &(wrq->u), key); - if(copy_to_user(wrq->u.encoding.pointer, key, 2)) - ret = -EFAULT; - } - break; - case SIOCSIWENCODE: - /* Set scramble key */ - if(wrq->u.encoding.pointer != (caddr_t) 0) - { - char key[2]; - if(copy_from_user(key, wrq->u.encoding.pointer, 2)) - { - ret = -EFAULT; - break; - } - ret = netwave_set_scramble(dev, NULL, &(wrq->u), key); - } - break; - case SIOCGIWMODE: - /* Mode of operation */ - ret = netwave_get_mode(dev, NULL, &(wrq->u), NULL); - break; -#else /* WIRELESS_EXT > 8 */ - case SIOCGIWENCODE: - /* Get scramble key */ - ret = netwave_get_scramble(dev, NULL, &(wrq->u), - (char *) &wrq->u.encoding.code); - break; - case SIOCSIWENCODE: - /* Set scramble key */ - ret = netwave_set_scramble(dev, NULL, &(wrq->u), - (char *) &wrq->u.encoding.code); - break; -#endif /* WIRELESS_EXT > 8 */ - case SIOCGIWRANGE: - /* Basic checking... */ - if(wrq->u.data.pointer != (caddr_t) 0) { - struct iw_range range; - ret = netwave_get_range(dev, NULL, &(wrq->u), (char *) &range); - if (copy_to_user(wrq->u.data.pointer, &range, - sizeof(struct iw_range))) - ret = -EFAULT; - } - break; - case SIOCGIWPRIV: - /* Basic checking... */ - if(wrq->u.data.pointer != (caddr_t) 0) { - /* Set the number of ioctl available */ - wrq->u.data.length = sizeof(netwave_private_args) / sizeof(netwave_private_args[0]); - - /* Copy structure to the user buffer */ - if(copy_to_user(wrq->u.data.pointer, - (u_char *) netwave_private_args, - sizeof(netwave_private_args))) - ret = -EFAULT; - } - break; - case SIOCGIPSNAP: - if(wrq->u.data.pointer != (caddr_t) 0) { - char buffer[sizeof( struct site_survey)]; - ret = netwave_get_snap(dev, NULL, &(wrq->u), buffer); - /* Copy structure to the user buffer */ - if(copy_to_user(wrq->u.data.pointer, - buffer, - sizeof( struct site_survey))) - { - printk(KERN_DEBUG "Bad buffer!\n"); - break; - } - } - break; -#endif /* WIRELESS_EXT <= 12 */ -#endif /* WIRELESS_EXT */ - default: - ret = -EOPNOTSUPP; - } - - return ret; -} /* * Function netwave_pcmcia_config (link) diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 9a8790e3580c..5c1a1adf1ff8 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -462,14 +462,12 @@ prism54_get_range(struct net_device *ndev, struct iw_request_info *info, /* txpower is supported in dBm's */ range->txpower_capa = IW_TXPOW_DBM; -#if WIRELESS_EXT > 16 /* Event capability (kernel + driver) */ range->event_capa[0] = (IW_EVENT_CAPA_K_0 | IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | IW_EVENT_CAPA_MASK(SIOCGIWAP)); range->event_capa[1] = IW_EVENT_CAPA_K_1; range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVCUSTOM); -#endif /* WIRELESS_EXT > 16 */ if (islpci_get_state(priv) < PRV_STATE_INIT) return 0; @@ -693,14 +691,13 @@ prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, extra + dwrq->length, &(bsslist->bsslist[i]), noise); -#if WIRELESS_EXT > 16 + /* Check if there is space for one more entry */ if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) { /* Ask user space to try again with a bigger buffer */ rvalue = -E2BIG; break; } -#endif /* WIRELESS_EXT > 16 */ } kfree(bsslist); @@ -2727,12 +2724,7 @@ const struct iw_handler_def prism54_handler_def = { .standard = (iw_handler *) prism54_handler, .private = (iw_handler *) prism54_private_handler, .private_args = (struct iw_priv_args *) prism54_private_args, -#if WIRELESS_EXT > 16 .get_wireless_stats = prism54_get_wireless_stats, -#endif /* WIRELESS_EXT > 16 */ -#if WIRELESS_EXT == 16 - .spy_offset = offsetof(islpci_private, spy_data), -#endif /* WIRELESS_EXT == 16 */ }; /* For wpa_supplicant */ diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index 10cce514c15d..6c9584a9f284 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -837,13 +837,9 @@ islpci_setup(struct pci_dev *pdev) priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ? priv->monitor_type : ARPHRD_ETHER; -#if WIRELESS_EXT > 16 /* Add pointers to enable iwspy support. */ priv->wireless_data.spy_data = &priv->spy_data; ndev->wireless_data = &priv->wireless_data; -#else /* WIRELESS_EXT > 16 */ - ndev->get_wireless_stats = &prism54_get_wireless_stats; -#endif /* WIRELESS_EXT > 16 */ /* save the start and end address of the PCI memory area */ ndev->mem_start = (unsigned long) priv->device_base; diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h index 32a1019f1b36..efbed4397951 100644 --- a/drivers/net/wireless/prism54/islpci_dev.h +++ b/drivers/net/wireless/prism54/islpci_dev.h @@ -100,9 +100,7 @@ typedef struct { struct iw_spy_data spy_data; /* iwspy support */ -#if WIRELESS_EXT > 16 struct iw_public_data wireless_data; -#endif /* WIRELESS_EXT > 16 */ int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */ diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c index 7a5e20a17890..b0d8b5b03152 100644 --- a/drivers/net/wireless/wavelan.c +++ b/drivers/net/wireless/wavelan.c @@ -430,7 +430,6 @@ static void fee_read(unsigned long ioaddr, /* I/O port of the card */ } } -#ifdef WIRELESS_EXT /* if the wireless extension exists in the kernel */ /*------------------------------------------------------------------*/ /* @@ -514,7 +513,6 @@ static void fee_write(unsigned long ioaddr, /* I/O port of the card */ fee_wait(ioaddr, 10, 100); #endif /* EEPROM_IS_PROTECTED */ } -#endif /* WIRELESS_EXT */ /************************ I82586 SUBROUTINES *************************/ /* @@ -973,11 +971,9 @@ static void wv_mmc_show(struct net_device * dev) mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m)); mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0); -#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */ /* Don't forget to update statistics */ lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; -#endif /* WIRELESS_EXT */ printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n"); #ifdef DEBUG_SHOW_UNUSED @@ -1499,7 +1495,6 @@ static int wavelan_set_mac_address(struct net_device * dev, void *addr) } #endif /* SET_MAC_ADDRESS */ -#ifdef WIRELESS_EXT /* if wireless extensions exist in the kernel */ /*------------------------------------------------------------------*/ /* @@ -2473,7 +2468,6 @@ static iw_stats *wavelan_get_wireless_stats(struct net_device * dev) #endif return &lp->wstats; } -#endif /* WIRELESS_EXT */ /************************* PACKET RECEPTION *************************/ /* @@ -4194,11 +4188,9 @@ static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr) dev->set_mac_address = &wavelan_set_mac_address; #endif /* SET_MAC_ADDRESS */ -#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */ dev->wireless_handlers = &wavelan_handler_def; lp->wireless_data.spy_data = &lp->spy_data; dev->wireless_data = &lp->wireless_data; -#endif dev->mtu = WAVELAN_MTU; diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h index 509ff22a6caa..166e28b9a4f7 100644 --- a/drivers/net/wireless/wavelan.p.h +++ b/drivers/net/wireless/wavelan.p.h @@ -409,11 +409,9 @@ #define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical). */ #undef SET_MAC_ADDRESS /* Experimental */ -#ifdef WIRELESS_EXT /* If wireless extensions exist in the kernel */ /* Warning: this stuff will slow down the driver. */ #define WIRELESS_SPY /* Enable spying addresses. */ #undef HISTOGRAM /* Enable histogram of signal level. */ -#endif /****************************** DEBUG ******************************/ @@ -506,12 +504,10 @@ struct net_local u_short tx_first_free; u_short tx_first_in_use; -#ifdef WIRELESS_EXT iw_stats wstats; /* Wireless-specific statistics */ struct iw_spy_data spy_data; struct iw_public_data wireless_data; -#endif #ifdef HISTOGRAM int his_number; /* number of intervals */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 183c4732ef65..4b3c98f5c564 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -415,7 +415,6 @@ fee_read(u_long base, /* i/o port of the card */ } } -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /*------------------------------------------------------------------*/ /* @@ -500,7 +499,6 @@ fee_write(u_long base, /* i/o port of the card */ fee_wait(base, 10, 100); #endif /* EEPROM_IS_PROTECTED */ } -#endif /* WIRELESS_EXT */ /******************* WaveLAN Roaming routines... ********************/ @@ -1161,10 +1159,8 @@ wv_mmc_show(struct net_device * dev) mmc_read(base, 0, (u_char *)&m, sizeof(m)); mmc_out(base, mmwoff(0, mmw_freeze), 0); -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /* Don't forget to update statistics */ lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; -#endif /* WIRELESS_EXT */ spin_unlock_irqrestore(&lp->spinlock, flags); @@ -1550,7 +1546,6 @@ wavelan_set_mac_address(struct net_device * dev, } #endif /* SET_MAC_ADDRESS */ -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /*------------------------------------------------------------------*/ /* @@ -2793,7 +2788,6 @@ wavelan_get_wireless_stats(struct net_device * dev) #endif return &lp->wstats; } -#endif /* WIRELESS_EXT */ /************************* PACKET RECEPTION *************************/ /* @@ -4679,11 +4673,9 @@ wavelan_attach(void) dev->watchdog_timeo = WATCHDOG_JIFFIES; SET_ETHTOOL_OPS(dev, &ops); -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ dev->wireless_handlers = &wavelan_handler_def; lp->wireless_data.spy_data = &lp->spy_data; dev->wireless_data = &lp->wireless_data; -#endif /* Other specific data */ dev->mtu = WAVELAN_MTU; diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h index 01d882be8790..724a715089c9 100644 --- a/drivers/net/wireless/wavelan_cs.p.h +++ b/drivers/net/wireless/wavelan_cs.p.h @@ -472,11 +472,9 @@ #define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */ #undef SET_MAC_ADDRESS /* Experimental */ -#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /* Warning : these stuff will slow down the driver... */ #define WIRELESS_SPY /* Enable spying addresses */ #undef HISTOGRAM /* Enable histogram of sig level... */ -#endif /****************************** DEBUG ******************************/ @@ -624,12 +622,10 @@ struct net_local int rfp; /* Last DMA machine receive pointer */ int overrunning; /* Receiver overrun flag */ -#ifdef WIRELESS_EXT iw_stats wstats; /* Wireless specific stats */ struct iw_spy_data spy_data; struct iw_public_data wireless_data; -#endif #ifdef HISTOGRAM int his_number; /* Number of intervals */ -- GitLab From 2759c8d536efe3b853867f345627d89fb64c37af Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 24 Sep 2005 04:09:04 -0400 Subject: [PATCH 0151/1519] [wireless airo] remove needed dma_addr_t obfuscation Fixes bus address truncation bug for certain configs. --- drivers/net/wireless/airo.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index a6194955df2c..746456c34df8 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2521,7 +2521,8 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, unsigned long mem_start, mem_len, aux_start, aux_len; int rc = -1; int i; - unsigned char *busaddroff,*vpackoff; + dma_addr_t busaddroff; + unsigned char *vpackoff; unsigned char __iomem *pciaddroff; mem_start = pci_resource_start(pci, 1); @@ -2564,7 +2565,7 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, /* * Setup descriptor RX, TX, CONFIG */ - busaddroff = (unsigned char *)ai->shared_dma; + busaddroff = ai->shared_dma; pciaddroff = ai->pciaux + AUX_OFFSET; vpackoff = ai->shared; @@ -2573,7 +2574,7 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, ai->rxfids[i].pending = 0; ai->rxfids[i].card_ram_off = pciaddroff; ai->rxfids[i].virtual_host_addr = vpackoff; - ai->rxfids[i].rx_desc.host_addr = (dma_addr_t) busaddroff; + ai->rxfids[i].rx_desc.host_addr = busaddroff; ai->rxfids[i].rx_desc.valid = 1; ai->rxfids[i].rx_desc.len = PKTSIZE; ai->rxfids[i].rx_desc.rdy = 0; @@ -2588,7 +2589,7 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, ai->txfids[i].card_ram_off = pciaddroff; ai->txfids[i].virtual_host_addr = vpackoff; ai->txfids[i].tx_desc.valid = 1; - ai->txfids[i].tx_desc.host_addr = (dma_addr_t) busaddroff; + ai->txfids[i].tx_desc.host_addr = busaddroff; memcpy(ai->txfids[i].virtual_host_addr, &wifictlhdr8023, sizeof(wifictlhdr8023)); @@ -2601,8 +2602,8 @@ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, /* Rid descriptor setup */ ai->config_desc.card_ram_off = pciaddroff; ai->config_desc.virtual_host_addr = vpackoff; - ai->config_desc.rid_desc.host_addr = (dma_addr_t) busaddroff; - ai->ridbus = (dma_addr_t)busaddroff; + ai->config_desc.rid_desc.host_addr = busaddroff; + ai->ridbus = busaddroff; ai->config_desc.rid_desc.rid = 0; ai->config_desc.rid_desc.len = RIDSIZE; ai->config_desc.rid_desc.valid = 1; -- GitLab From ee500aabf10323a7e313731b8c0be7c2c6dd27c7 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:34:38 +0800 Subject: [PATCH 0152/1519] [PATCH] libata: indent and whitespace change Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- drivers/scsi/sata_promise.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e5b01997117a..cc68f5706acf 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3586,7 +3586,7 @@ u8 ata_bmdma_status(struct ata_port *ap) void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; host_stat = readb(mmio + ATA_DMA_STATUS); } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); return host_stat; } diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 538ad727bd2e..def7e0d9dacb 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -438,11 +438,11 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, break; default: - ap->stats.idle_irq++; - break; + ap->stats.idle_irq++; + break; } - return handled; + return handled; } static void pdc_irq_clear(struct ata_port *ap) -- GitLab From 14be71f4c5c5ad1e222c5202ee6d234e9c8828b7 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:36:35 +0800 Subject: [PATCH 0153/1519] [PATCH] libata: rename host states Changes: s/PIO_ST_/HSM_ST_/ and s/pio_task_state/hsm_task_state/. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 78 +++++++++++++++++++------------------- include/linux/libata.h | 20 +++++----- 2 files changed, 49 insertions(+), 49 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index cc68f5706acf..c4fcdc30f18c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2425,20 +2425,20 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) static unsigned long ata_pio_poll(struct ata_port *ap) { u8 status; - unsigned int poll_state = PIO_ST_UNKNOWN; - unsigned int reg_state = PIO_ST_UNKNOWN; - const unsigned int tmout_state = PIO_ST_TMOUT; - - switch (ap->pio_task_state) { - case PIO_ST: - case PIO_ST_POLL: - poll_state = PIO_ST_POLL; - reg_state = PIO_ST; + unsigned int poll_state = HSM_ST_UNKNOWN; + unsigned int reg_state = HSM_ST_UNKNOWN; + const unsigned int tmout_state = HSM_ST_TMOUT; + + switch (ap->hsm_task_state) { + case HSM_ST: + case HSM_ST_POLL: + poll_state = HSM_ST_POLL; + reg_state = HSM_ST; break; - case PIO_ST_LAST: - case PIO_ST_LAST_POLL: - poll_state = PIO_ST_LAST_POLL; - reg_state = PIO_ST_LAST; + case HSM_ST_LAST: + case HSM_ST_LAST_POLL: + poll_state = HSM_ST_LAST_POLL; + reg_state = HSM_ST_LAST; break; default: BUG(); @@ -2448,14 +2448,14 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { - ap->pio_task_state = tmout_state; + ap->hsm_task_state = tmout_state; return 0; } - ap->pio_task_state = poll_state; + ap->hsm_task_state = poll_state; return ATA_SHORT_PAUSE; } - ap->pio_task_state = reg_state; + ap->hsm_task_state = reg_state; return 0; } @@ -2480,14 +2480,14 @@ static int ata_pio_complete (struct ata_port *ap) * we enter, BSY will be cleared in a chk-status or two. If not, * the drive is probably seeking or something. Snooze for a couple * msecs, then chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { msleep(2); drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { - ap->pio_task_state = PIO_ST_LAST_POLL; + ap->hsm_task_state = HSM_ST_LAST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return 0; } @@ -2495,14 +2495,14 @@ static int ata_pio_complete (struct ata_port *ap) drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return 0; } qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, drv_stat); @@ -2662,7 +2662,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) unsigned char *buf; if (qc->cursect == (qc->nsect - 1)) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; page = sg[qc->cursg].page; offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; @@ -2712,7 +2712,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned int offset, count; if (qc->curbytes + bytes >= qc->nbytes) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; next_sg: if (unlikely(qc->cursg >= qc->n_elem)) { @@ -2734,7 +2734,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) for (i = 0; i < words; i++) ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2815,7 +2815,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; } /** @@ -2837,14 +2837,14 @@ static void ata_pio_block(struct ata_port *ap) * a chk-status or two. If not, the drive is probably seeking * or something. Snooze for a couple msecs, then * chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ status = ata_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ap->pio_task_state = PIO_ST_POLL; + ap->hsm_task_state = HSM_ST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return; } @@ -2856,7 +2856,7 @@ static void ata_pio_block(struct ata_port *ap) if (is_atapi_taskfile(&qc->tf)) { /* no more data to transfer or unsupported ATAPI command */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2864,7 +2864,7 @@ static void ata_pio_block(struct ata_port *ap) } else { /* handle BSY=0, DRQ=0 as error */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return; } @@ -2884,7 +2884,7 @@ static void ata_pio_error(struct ata_port *ap) printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n", ap->id, drv_stat); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, drv_stat | ATA_ERR); } @@ -2899,25 +2899,25 @@ static void ata_pio_task(void *_data) timeout = 0; qc_completed = 0; - switch (ap->pio_task_state) { - case PIO_ST_IDLE: + switch (ap->hsm_task_state) { + case HSM_ST_IDLE: return; - case PIO_ST: + case HSM_ST: ata_pio_block(ap); break; - case PIO_ST_LAST: + case HSM_ST_LAST: qc_completed = ata_pio_complete(ap); break; - case PIO_ST_POLL: - case PIO_ST_LAST_POLL: + case HSM_ST_POLL: + case HSM_ST_LAST_POLL: timeout = ata_pio_poll(ap); break; - case PIO_ST_TMOUT: - case PIO_ST_ERR: + case HSM_ST_TMOUT: + case HSM_ST_ERR: ata_pio_error(ap); return; } @@ -3360,7 +3360,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) case ATA_PROT_PIO: /* load tf registers, initiate polling pio */ ata_qc_set_polling(qc); ata_tf_to_host_nolock(ap, &qc->tf); - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); break; @@ -3806,7 +3806,7 @@ static void atapi_packet_task(void *_data) ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); /* PIO commands are handled by polling */ - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); } diff --git a/include/linux/libata.h b/include/linux/libata.h index ceee1fc42c60..bb2d916bce44 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -156,15 +156,15 @@ enum { ATA_SHIFT_PIO = 11, }; -enum pio_task_states { - PIO_ST_UNKNOWN, - PIO_ST_IDLE, - PIO_ST_POLL, - PIO_ST_TMOUT, - PIO_ST, - PIO_ST_LAST, - PIO_ST_LAST_POLL, - PIO_ST_ERR, +enum hsm_task_states { + HSM_ST_UNKNOWN, + HSM_ST_IDLE, + HSM_ST_POLL, + HSM_ST_TMOUT, + HSM_ST, + HSM_ST_LAST, + HSM_ST_LAST_POLL, + HSM_ST_ERR, }; /* forward declarations */ @@ -319,7 +319,7 @@ struct ata_port { struct work_struct packet_task; struct work_struct pio_task; - unsigned int pio_task_state; + unsigned int hsm_task_state; unsigned long pio_task_timeout; void *private_data; -- GitLab From bfd00722ac230a39bc5234c5f7a514ea6a77996d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 26 Sep 2005 11:28:47 +0900 Subject: [PATCH 0154/1519] [PATCH] libata EH document update Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- Documentation/DocBook/libata.tmpl | 356 ++++++++++++++++++++++++++++++ 1 file changed, 356 insertions(+) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 375ae760dc1e..fcbb58fc0fee 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -413,6 +413,362 @@ and other resources, etc. + + Error handling + + + This chapter describes how errors are handled under libata. + Readers are advised to read SCSI EH + (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first. + + + Origins of commands + + In libata, a command is represented with struct ata_queued_cmd + or qc. qc's are preallocated during port initialization and + repetitively used for command executions. Currently only one + qc is allocated per port but yet-to-be-merged NCQ branch + allocates one for each tag and maps each qc to NCQ tag 1-to-1. + + + libata commands can originate from two sources - libata itself + and SCSI midlayer. libata internal commands are used for + initialization and error handling. All normal blk requests + and commands for SCSI emulation are passed as SCSI commands + through queuecommand callback of SCSI host template. + + + + How commands are issued + + + + Internal commands + + + First, qc is allocated and initialized using + ata_qc_new_init(). Although ata_qc_new_init() doesn't + implement any wait or retry mechanism when qc is not + available, internal commands are currently issued only during + initialization and error recovery, so no other command is + active and allocation is guaranteed to succeed. + + + Once allocated qc's taskfile is initialized for the command to + be executed. qc currently has two mechanisms to notify + completion. One is via qc->complete_fn() callback and the + other is completion qc->waiting. qc->complete_fn() callback + is the asynchronous path used by normal SCSI translated + commands and qc->waiting is the synchronous (issuer sleeps in + process context) path used by internal commands. + + + Once initialization is complete, host_set lock is acquired + and the qc is issued. + + + + + SCSI commands + + + All libata drivers use ata_scsi_queuecmd() as + hostt->queuecommand callback. scmds can either be simulated + or translated. No qc is involved in processing a simulated + scmd. The result is computed right away and the scmd is + completed. + + + For a translated scmd, ata_qc_new_init() is invoked to + allocate a qc and the scmd is translated into the qc. SCSI + midlayer's completion notification function pointer is stored + into qc->scsidone. + + + qc->complete_fn() callback is used for completion + notification. ATA commands use ata_scsi_qc_complete() while + ATAPI commands use atapi_qc_complete(). Both functions end up + calling qc->scsidone to notify upper layer when the qc is + finished. After translation is completed, the qc is issued + with ata_qc_issue(). + + + Note that SCSI midlayer invokes hostt->queuecommand while + holding host_set lock, so all above occur while holding + host_set lock. + + + + + + + + How commands are processed + + Depending on which protocol and which controller are used, + commands are processed differently. For the purpose of + discussion, a controller which uses taskfile interface and all + standard callbacks is assumed. + + + Currently 6 ATA command protocols are used. They can be + sorted into the following four categories according to how + they are processed. + + + + ATA NO DATA or DMA + + + ATA_PROT_NODATA and ATA_PROT_DMA fall into this category. + These types of commands don't require any software + intervention once issued. Device will raise interrupt on + completion. + + + + + ATA PIO + + + ATA_PROT_PIO is in this category. libata currently + implements PIO with polling. ATA_NIEN bit is set to turn + off interrupt and pio_task on ata_wq performs polling and + IO. + + + + + ATAPI NODATA or DMA + + + ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this + category. packet_task is used to poll BSY bit after + issuing PACKET command. Once BSY is turned off by the + device, packet_task transfers CDB and hands off processing + to interrupt handler. + + + + + ATAPI PIO + + + ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set + and, as in ATAPI NODATA or DMA, packet_task submits cdb. + However, after submitting cdb, further processing (data + transfer) is handed off to pio_task. + + + + + + + How commands are completed + + Once issued, all qc's are either completed with + ata_qc_complete() or time out. For commands which are handled + by interrupts, ata_host_intr() invokes ata_qc_complete(), and, + for PIO tasks, pio_task invokes ata_qc_complete(). In error + cases, packet_task may also complete commands. + + + ata_qc_complete() does the following. + + + + + + + DMA memory is unmapped. + + + + + + ATA_QCFLAG_ACTIVE is clared from qc->flags. + + + + + + qc->complete_fn() callback is invoked. If the return value of + the callback is not zero. Completion is short circuited and + ata_qc_complete() returns. + + + + + + __ata_qc_complete() is called, which does + + + + + qc->flags is cleared to zero. + + + + + + ap->active_tag and qc->tag are poisoned. + + + + + + qc->waiting is claread & completed (in that order). + + + + + + qc is deallocated by clearing appropriate bit in ap->qactive. + + + + + + + + + + + So, it basically notifies upper layer and deallocates qc. One + exception is short-circuit path in #3 which is used by + atapi_qc_complete(). + + + For all non-ATAPI commands, whether it fails or not, almost + the same code path is taken and very little error handling + takes place. A qc is completed with success status if it + succeeded, with failed status otherwise. + + + However, failed ATAPI commands require more handling as + REQUEST SENSE is needed to acquire sense data. If an ATAPI + command fails, ata_qc_complete() is invoked with error status, + which in turn invokes atapi_qc_complete() via + qc->complete_fn() callback. + + + This makes atapi_qc_complete() set scmd->result to + SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As + the sense data is empty but scmd->result is CHECK CONDITION, + SCSI midlayer will invoke EH for the scmd, and returning 1 + makes ata_qc_complete() to return without deallocating the qc. + This leads us to ata_scsi_error() with partially completed qc. + + + + + ata_scsi_error() + + ata_scsi_error() is the current hostt->eh_strategy_handler() + for libata. As discussed above, this will be entered in two + cases - timeout and ATAPI error completion. This function + calls low level libata driver's eng_timeout() callback, the + standard callback for which is ata_eng_timeout(). It checks + if a qc is active and calls ata_qc_timeout() on the qc if so. + Actual error handling occurs in ata_qc_timeout(). + + + If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and + completes the qc. Note that as we're currently in EH, we + cannot call scsi_done. As described in SCSI EH doc, a + recovered scmd should be either retried with + scsi_queue_insert() or finished with scsi_finish_command(). + Here, we override qc->scsidone with scsi_finish_command() and + calls ata_qc_complete(). + + + If EH is invoked due to a failed ATAPI qc, the qc here is + completed but not deallocated. The purpose of this + half-completion is to use the qc as place holder to make EH + code reach this place. This is a bit hackish, but it works. + + + Once control reaches here, the qc is deallocated by invoking + __ata_qc_complete() explicitly. Then, internal qc for REQUEST + SENSE is issued. Once sense data is acquired, scmd is + finished by directly invoking scsi_finish_command() on the + scmd. Note that as we already have completed and deallocated + the qc which was associated with the scmd, we don't need + to/cannot call ata_qc_complete() again. + + + + + Problems with the current EH + + + + + + Error representation is too crude. Currently any and all + error conditions are represented with ATA STATUS and ERROR + registers. Errors which aren't ATA device errors are treated + as ATA device errors by setting ATA_ERR bit. Better error + descriptor which can properly represent ATA and other + errors/exceptions is needed. + + + + + + When handling timeouts, no action is taken to make device + forget about the timed out command and ready for new commands. + + + + + + EH handling via ata_scsi_error() is not properly protected + from usual command processing. On EH entrance, the device is + not in quiescent state. Timed out commands may succeed or + fail any time. pio_task and atapi_task may still be running. + + + + + + Too weak error recovery. Devices / controllers causing HSM + mismatch errors and other errors quite often require reset to + return to known state. Also, advanced error handling is + necessary to support features like NCQ and hotplug. + + + + + + ATA errors are directly handled in the interrupt handler and + PIO errors in pio_task. This is problematic for advanced + error handling for the following reasons. + + + First, advanced error handling often requires context and + internal qc execution. + + + Second, even a simple failure (say, CRC error) needs + information gathering and could trigger complex error handling + (say, resetting & reconfiguring). Having multiple code + paths to gather information, enter EH and trigger actions + makes life painful. + + + Third, scattered EH code makes implementing low level drivers + difficult. Low level drivers override libata callbacks. If + EH is scattered over several places, each affected callbacks + should perform its part of error handling. This can be error + prone and painful. + + + + + + + -- GitLab From a1213499b0ef75d8c627b461047805a235c9dd00 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 28 Sep 2005 13:26:47 -0400 Subject: [PATCH 0155/1519] libata: move EH docs to separate DocBook chapter --- Documentation/DocBook/libata.tmpl | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index fcbb58fc0fee..b2ec780bcda1 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -413,7 +413,9 @@ and other resources, etc. - + + + Error handling @@ -422,7 +424,7 @@ and other resources, etc. (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first. - Origins of commands + Origins of commands In libata, a command is represented with struct ata_queued_cmd or qc. qc's are preallocated during port initialization and @@ -437,9 +439,9 @@ and other resources, etc. and commands for SCSI emulation are passed as SCSI commands through queuecommand callback of SCSI host template. - + - How commands are issued + How commands are issued @@ -501,9 +503,9 @@ and other resources, etc. - + - How commands are processed + How commands are processed Depending on which protocol and which controller are used, commands are processed differently. For the purpose of @@ -562,9 +564,9 @@ and other resources, etc. - + - How commands are completed + How commands are completed Once issued, all qc's are either completed with ata_qc_complete() or time out. For commands which are handled @@ -660,9 +662,9 @@ and other resources, etc. This leads us to ata_scsi_error() with partially completed qc. - + - ata_scsi_error() + ata_scsi_error() ata_scsi_error() is the current hostt->eh_strategy_handler() for libata. As discussed above, this will be entered in two @@ -697,9 +699,9 @@ and other resources, etc. to/cannot call ata_qc_complete() again. - + - Problems with the current EH + Problems with the current EH @@ -766,9 +768,7 @@ and other resources, etc. - - - + -- GitLab From b4b52db71529bbe46da914eda772fb574914c94d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 26 Sep 2005 12:48:41 +0100 Subject: [PATCH 0156/1519] [PATCH] ata: re-order speeds sensibly. Signed-off-by: Jeff Garzik --- include/linux/ata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/ata.h b/include/linux/ata.h index 85169ea9eb01..ecb7346d0c16 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -147,14 +147,14 @@ enum { XFER_MW_DMA_2 = 0x22, XFER_MW_DMA_1 = 0x21, XFER_MW_DMA_0 = 0x20, + XFER_SW_DMA_2 = 0x12, + XFER_SW_DMA_1 = 0x11, + XFER_SW_DMA_0 = 0x10, XFER_PIO_4 = 0x0C, XFER_PIO_3 = 0x0B, XFER_PIO_2 = 0x0A, XFER_PIO_1 = 0x09, XFER_PIO_0 = 0x08, - XFER_SW_DMA_2 = 0x12, - XFER_SW_DMA_1 = 0x11, - XFER_SW_DMA_0 = 0x10, XFER_PIO_SLOW = 0x00, /* ATAPI stuff */ -- GitLab From 604116a32eaef4e10d05ae3361450b3f4a4e6a90 Mon Sep 17 00:00:00 2001 From: Michael Wu Date: Wed, 28 Sep 2005 15:16:46 -0500 Subject: [PATCH 0157/1519] This patch fixes a typo in ieee80211.h: ieee82011_deauth -> ieee80211_deauth Signed-off-by: Michael Wu Signed-off-by: James Ketrenos --- include/net/ieee80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 4851756202c5..33b595ebef1f 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -613,7 +613,7 @@ struct ieee80211_disassoc { } __attribute__ ((packed)); /* Alias deauth for disassoc */ -#define ieee82011_deauth ieee80211_disassoc +#define ieee80211_deauth ieee80211_disassoc struct ieee80211_probe_request { struct ieee80211_hdr_3addr header; -- GitLab From 59c422358d6573716f2bf2e78e5b12c20eff5a31 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 27 Sep 2005 08:25:32 -0500 Subject: [PATCH 0158/1519] [IA64-SGI] Increase max system size of SGI SN systems Increase the maximum system size of SGI SN systems. Note that this is not the maximum SSI size. The maximum system size is the number of nodes in the numalink domain. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- include/asm-ia64/sn/arch.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h index 8fce5a6db951..1a3831c04af6 100644 --- a/include/asm-ia64/sn/arch.h +++ b/include/asm-ia64/sn/arch.h @@ -41,7 +41,7 @@ * This value is also the value of the maximum number of NASIDs in the numalink * fabric. */ -#define MAX_NUMALINK_NODES 2048 +#define MAX_NUMALINK_NODES 16384 /* * The following defines attributes of the HUB chip. These attributes are -- GitLab From d719948e623622cf9fc8016f7ec63422d929eb3b Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 28 Sep 2005 16:09:46 -0700 Subject: [PATCH 0159/1519] [IA64] end of kernel 'data' is at _end, not _edata /proc/iomem describes a block of memory as "Kernel data", but the end address is derived from "_edata". The kernel actually has many other sections beyond _edata. Get the real end address from _end. Acked-by: Khalid Aziz Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 83b37c410ccd..3e9b797e6588 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -89,7 +89,7 @@ static struct resource code_resource = { }; extern void efi_initialize_iomem_resources(struct resource *, struct resource *); -extern char _text[], _edata[], _etext[]; +extern char _text[], _end[], _etext[]; unsigned long ia64_max_cacheline_size; unsigned long ia64_iobase; /* virtual address for I/O accesses */ @@ -192,7 +192,7 @@ static int __init register_memory(void) code_resource.start = ia64_tpa(_text); code_resource.end = ia64_tpa(_etext) - 1; data_resource.start = ia64_tpa(_etext); - data_resource.end = ia64_tpa(_edata) - 1; + data_resource.end = ia64_tpa(_end) - 1; efi_initialize_iomem_resources(&code_resource, &data_resource); return 0; -- GitLab From 7c254d3dba0fae124b1d33f784ca23572ac386b0 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 3 Oct 2005 09:50:40 -0500 Subject: [PATCH 0160/1519] This will move the ieee80211_is_ofdm_rate function to the ieee80211.h header, and I also added the ieee80211_is_cck_rate counterpart. Various drivers currently create there own version of these functions, but I guess the ieee80211 stack is the best place to provide such routines. Signed-off-by: Ivo van Doorn Signed-off-by: James Ketrenos --- include/net/ieee80211.h | 28 ++++++++++++++++++++++++++++ net/ieee80211/ieee80211_rx.c | 16 ---------------- 2 files changed, 28 insertions(+), 16 deletions(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 33b595ebef1f..58f62224e7ea 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -1045,6 +1045,34 @@ static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr) } +static inline int ieee80211_is_ofdm_rate(u8 rate) +{ + switch (rate & ~IEEE80211_BASIC_RATE_MASK) { + case IEEE80211_OFDM_RATE_6MB: + case IEEE80211_OFDM_RATE_9MB: + case IEEE80211_OFDM_RATE_12MB: + case IEEE80211_OFDM_RATE_18MB: + case IEEE80211_OFDM_RATE_24MB: + case IEEE80211_OFDM_RATE_36MB: + case IEEE80211_OFDM_RATE_48MB: + case IEEE80211_OFDM_RATE_54MB: + return 1; + } + return 0; +} + +static inline int ieee80211_is_cck_rate(u8 rate) +{ + switch (rate & ~IEEE80211_BASIC_RATE_MASK) { + case IEEE80211_CCK_RATE_1MB: + case IEEE80211_CCK_RATE_2MB: + case IEEE80211_CCK_RATE_5MB: + case IEEE80211_CCK_RATE_11MB: + return 1; + } + return 0; +} + /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev); extern struct net_device *alloc_ieee80211(int sizeof_priv); diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index fcf05bf677b8..2f4b16c1c143 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -1020,22 +1020,6 @@ static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct iee /***************************************************/ -static inline int ieee80211_is_ofdm_rate(u8 rate) -{ - switch (rate & ~IEEE80211_BASIC_RATE_MASK) { - case IEEE80211_OFDM_RATE_6MB: - case IEEE80211_OFDM_RATE_9MB: - case IEEE80211_OFDM_RATE_12MB: - case IEEE80211_OFDM_RATE_18MB: - case IEEE80211_OFDM_RATE_24MB: - case IEEE80211_OFDM_RATE_36MB: - case IEEE80211_OFDM_RATE_48MB: - case IEEE80211_OFDM_RATE_54MB: - return 1; - } - return 0; -} - static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct ieee80211_probe_response *beacon, struct ieee80211_network *network, -- GitLab From e846cbb11245e648983b50349a1c715202d5ccf0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 3 Oct 2005 10:02:14 -0500 Subject: [PATCH 0161/1519] Fix implicit nocast warnings in ieee80211 code: net/ieee80211/ieee80211_tx.c:215:9: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: James Ketrenos --- net/ieee80211/ieee80211_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 8d87897d7eb7..e860777ab8d3 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -187,7 +187,7 @@ void ieee80211_txb_free(struct ieee80211_txb *txb) } static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, - int gfp_mask) + unsigned int gfp_mask) { struct ieee80211_txb *txb; int i; -- GitLab From ff9e00f1b09d594004f91700a371870f729ffc02 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 3 Oct 2005 10:19:25 -0500 Subject: [PATCH 0162/1519] Currently the info_element is parsed by 2 seperate functions, this results in a lot of duplicate code. This will move the parsing stage into a seperate function. Signed-off-by: Ivo van Doorn Signed-off-by: James Ketrenos --- net/ieee80211/ieee80211_rx.c | 267 +++++++++++++---------------------- 1 file changed, 99 insertions(+), 168 deletions(-) diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 2f4b16c1c143..3bf04d6d2b13 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -917,158 +917,23 @@ static int ieee80211_parse_qos_info_param_IE(struct ieee80211_info_element return rc; } -static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct ieee80211_assoc_response - *frame, struct ieee80211_rx_stats *stats) -{ - struct ieee80211_network network_resp; - struct ieee80211_network *network = &network_resp; - struct ieee80211_info_element *info_element; - struct net_device *dev = ieee->dev; - u16 left; - - network->flags = 0; - network->qos_data.active = 0; - network->qos_data.supported = 0; - network->qos_data.param_count = 0; - network->qos_data.old_param_count = 0; - - //network->atim_window = le16_to_cpu(frame->aid) & (0x3FFF); - network->atim_window = le16_to_cpu(frame->aid); - network->listen_interval = le16_to_cpu(frame->status); - - info_element = frame->info_element; - left = stats->len - sizeof(*frame); - - while (left >= sizeof(struct ieee80211_info_element)) { - if (sizeof(struct ieee80211_info_element) + - info_element->len > left) { - IEEE80211_DEBUG_QOS("ASSOC RESP: parse failed: " - "info_element->len + 2 > left : " - "info_element->len+2=%zd left=%d, id=%d.\n", - info_element->len + - sizeof(struct - ieee80211_info_element), - left, info_element->id); - return 1; - } - - switch (info_element->id) { - case MFIE_TYPE_SSID: - if (ieee80211_is_empty_essid(info_element->data, - info_element->len)) { - network->flags |= NETWORK_EMPTY_ESSID; - break; - } - - network->ssid_len = min(info_element->len, - (u8) IW_ESSID_MAX_SIZE); - memcpy(network->ssid, info_element->data, - network->ssid_len); - if (network->ssid_len < IW_ESSID_MAX_SIZE) - memset(network->ssid + network->ssid_len, 0, - IW_ESSID_MAX_SIZE - network->ssid_len); - - IEEE80211_DEBUG_QOS("MFIE_TYPE_SSID: '%s' len=%d.\n", - network->ssid, network->ssid_len); - break; - - case MFIE_TYPE_TIM: - IEEE80211_DEBUG_QOS("MFIE_TYPE_TIM: ignored\n"); - break; - - case MFIE_TYPE_IBSS_SET: - IEEE80211_DEBUG_QOS("MFIE_TYPE_IBSS_SET: ignored\n"); - break; - - case MFIE_TYPE_CHALLENGE: - IEEE80211_DEBUG_QOS("MFIE_TYPE_CHALLENGE: ignored\n"); - break; - - case MFIE_TYPE_GENERIC: - IEEE80211_DEBUG_QOS("MFIE_TYPE_GENERIC: %d bytes\n", - info_element->len); - ieee80211_parse_qos_info_param_IE(info_element, - network); - break; - - case MFIE_TYPE_RSN: - IEEE80211_DEBUG_QOS("MFIE_TYPE_RSN: %d bytes\n", - info_element->len); - break; - - case MFIE_TYPE_QOS_PARAMETER: - printk("QoS Error need to parse QOS_PARAMETER IE\n"); - break; - - default: - IEEE80211_DEBUG_QOS("unsupported IE %d\n", - info_element->id); - break; - } - - left -= sizeof(struct ieee80211_info_element) + - info_element->len; - info_element = (struct ieee80211_info_element *) - &info_element->data[info_element->len]; - } - - if (ieee->handle_assoc_response != NULL) - ieee->handle_assoc_response(dev, frame, network); - - return 0; -} - -/***************************************************/ - -static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct ieee80211_probe_response - *beacon, - struct ieee80211_network *network, - struct ieee80211_rx_stats *stats) +static int ieee80211_parse_info_param(struct ieee80211_info_element *info_element, + u16 length, struct ieee80211_network *network) { + u8 i; #ifdef CONFIG_IEEE80211_DEBUG char rates_str[64]; char *p; #endif - struct ieee80211_info_element *info_element; - u16 left; - u8 i; - network->qos_data.active = 0; - network->qos_data.supported = 0; - network->qos_data.param_count = 0; - /* Pull out fixed field data */ - memcpy(network->bssid, beacon->header.addr3, ETH_ALEN); - network->capability = le16_to_cpu(beacon->capability); - network->last_scanned = jiffies; - network->time_stamp[0] = le32_to_cpu(beacon->time_stamp[0]); - network->time_stamp[1] = le32_to_cpu(beacon->time_stamp[1]); - network->beacon_interval = le16_to_cpu(beacon->beacon_interval); - /* Where to pull this? beacon->listen_interval; */ - network->listen_interval = 0x0A; - network->rates_len = network->rates_ex_len = 0; - network->last_associate = 0; - network->ssid_len = 0; - network->flags = 0; - network->atim_window = 0; - network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ? - 0x3 : 0x0; - - if (stats->freq == IEEE80211_52GHZ_BAND) { - /* for A band (No DS info) */ - network->channel = stats->received_channel; - } else - network->flags |= NETWORK_HAS_CCK; - - network->wpa_ie_len = 0; - network->rsn_ie_len = 0; - - info_element = beacon->info_element; - left = stats->len - sizeof(*beacon); - while (left >= sizeof(*info_element)) { - if (sizeof(*info_element) + info_element->len > left) { - IEEE80211_DEBUG_SCAN - ("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%Zd left=%d.\n", - info_element->len + sizeof(*info_element), left); + while (length >= sizeof(*info_element)) { + if (sizeof(*info_element) + info_element->len > length) { + IEEE80211_DEBUG_MGMT("Info elem: parse failed: " + "info_element->len + 2 > left : " + "info_element->len+2=%zd left=%d, id=%d.\n", + info_element->len + + sizeof(*info_element), + length, info_element->id); return 1; } @@ -1088,8 +953,8 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i memset(network->ssid + network->ssid_len, 0, IW_ESSID_MAX_SIZE - network->ssid_len); - IEEE80211_DEBUG_SCAN("MFIE_TYPE_SSID: '%s' len=%d.\n", - network->ssid, network->ssid_len); + IEEE80211_DEBUG_MGMT("MFIE_TYPE_SSID: '%s' len=%d.\n", + network->ssid, network->ssid_len); break; case MFIE_TYPE_RATES: @@ -1115,7 +980,7 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i } } - IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES: '%s' (%d)\n", + IEEE80211_DEBUG_MGMT("MFIE_TYPE_RATES: '%s' (%d)\n", rates_str, network->rates_len); break; @@ -1142,47 +1007,46 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i } } - IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES_EX: '%s' (%d)\n", + IEEE80211_DEBUG_MGMT("MFIE_TYPE_RATES_EX: '%s' (%d)\n", rates_str, network->rates_ex_len); break; case MFIE_TYPE_DS_SET: - IEEE80211_DEBUG_SCAN("MFIE_TYPE_DS_SET: %d\n", + IEEE80211_DEBUG_MGMT("MFIE_TYPE_DS_SET: %d\n", info_element->data[0]); - if (stats->freq == IEEE80211_24GHZ_BAND) - network->channel = info_element->data[0]; + network->channel = info_element->data[0]; break; case MFIE_TYPE_FH_SET: - IEEE80211_DEBUG_SCAN("MFIE_TYPE_FH_SET: ignored\n"); + IEEE80211_DEBUG_MGMT("MFIE_TYPE_FH_SET: ignored\n"); break; case MFIE_TYPE_CF_SET: - IEEE80211_DEBUG_SCAN("MFIE_TYPE_CF_SET: ignored\n"); + IEEE80211_DEBUG_MGMT("MFIE_TYPE_CF_SET: ignored\n"); break; case MFIE_TYPE_TIM: - IEEE80211_DEBUG_SCAN("MFIE_TYPE_TIM: ignored\n"); + IEEE80211_DEBUG_MGMT("MFIE_TYPE_TIM: ignored\n"); break; case MFIE_TYPE_ERP_INFO: network->erp_value = info_element->data[0]; - IEEE80211_DEBUG_SCAN("MFIE_TYPE_ERP_SET: %d\n", + IEEE80211_DEBUG_MGMT("MFIE_TYPE_ERP_SET: %d\n", network->erp_value); break; case MFIE_TYPE_IBSS_SET: network->atim_window = info_element->data[0]; - IEEE80211_DEBUG_SCAN("MFIE_TYPE_IBSS_SET: %d\n", + IEEE80211_DEBUG_MGMT("MFIE_TYPE_IBSS_SET: %d\n", network->atim_window); break; case MFIE_TYPE_CHALLENGE: - IEEE80211_DEBUG_SCAN("MFIE_TYPE_CHALLENGE: ignored\n"); + IEEE80211_DEBUG_MGMT("MFIE_TYPE_CHALLENGE: ignored\n"); break; case MFIE_TYPE_GENERIC: - IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n", + IEEE80211_DEBUG_MGMT("MFIE_TYPE_GENERIC: %d bytes\n", info_element->len); if (!ieee80211_parse_qos_info_param_IE(info_element, network)) @@ -1201,7 +1065,7 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i break; case MFIE_TYPE_RSN: - IEEE80211_DEBUG_SCAN("MFIE_TYPE_RSN: %d bytes\n", + IEEE80211_DEBUG_MGMT("MFIE_TYPE_RSN: %d bytes\n", info_element->len); network->rsn_ie_len = min(info_element->len + 2, MAX_WPA_IE_LEN); @@ -1210,21 +1074,88 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i break; case MFIE_TYPE_QOS_PARAMETER: - printk(KERN_ERR - "QoS Error need to parse QOS_PARAMETER IE\n"); + printk(KERN_ERR "QoS Error need to parse QOS_PARAMETER IE\n"); break; default: - IEEE80211_DEBUG_SCAN("unsupported IE %d\n", - info_element->id); + IEEE80211_DEBUG_MGMT("unsupported IE %d\n", + info_element->id); break; } - left -= sizeof(*info_element) + info_element->len; - info_element = (struct ieee80211_info_element *) - &info_element->data[info_element->len]; + length -= sizeof(*info_element) + info_element->len; + info_element = (struct ieee80211_info_element *) &info_element->data[info_element->len]; } + return 0; +} + +static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct ieee80211_assoc_response + *frame, struct ieee80211_rx_stats *stats) +{ + struct ieee80211_network network_resp; + struct ieee80211_network *network = &network_resp; + struct net_device *dev = ieee->dev; + + network->flags = 0; + network->qos_data.active = 0; + network->qos_data.supported = 0; + network->qos_data.param_count = 0; + network->qos_data.old_param_count = 0; + + //network->atim_window = le16_to_cpu(frame->aid) & (0x3FFF); + network->atim_window = le16_to_cpu(frame->aid); + network->listen_interval = le16_to_cpu(frame->status); + + if(ieee80211_parse_info_param(frame->info_element, stats->len - sizeof(*frame), network)) + return 1; + + if (ieee->handle_assoc_response != NULL) + ieee->handle_assoc_response(dev, frame, network); + + return 0; +} + +/***************************************************/ + +static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct ieee80211_probe_response + *beacon, + struct ieee80211_network *network, + struct ieee80211_rx_stats *stats) +{ + network->qos_data.active = 0; + network->qos_data.supported = 0; + network->qos_data.param_count = 0; + + /* Pull out fixed field data */ + memcpy(network->bssid, beacon->header.addr3, ETH_ALEN); + network->capability = le16_to_cpu(beacon->capability); + network->last_scanned = jiffies; + network->time_stamp[0] = le32_to_cpu(beacon->time_stamp[0]); + network->time_stamp[1] = le32_to_cpu(beacon->time_stamp[1]); + network->beacon_interval = le16_to_cpu(beacon->beacon_interval); + /* Where to pull this? beacon->listen_interval; */ + network->listen_interval = 0x0A; + network->rates_len = network->rates_ex_len = 0; + network->last_associate = 0; + network->ssid_len = 0; + network->flags = 0; + network->atim_window = 0; + network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ? + 0x3 : 0x0; + + if (stats->freq == IEEE80211_52GHZ_BAND) { + /* for A band (No DS info) */ + network->channel = stats->received_channel; + } else + network->flags |= NETWORK_HAS_CCK; + + network->wpa_ie_len = 0; + network->rsn_ie_len = 0; + + if(ieee80211_parse_info_param(beacon->info_element, stats->len - sizeof(*beacon), network)) + return 1; + network->mode = 0; if (stats->freq == IEEE80211_52GHZ_BAND) network->mode = IEEE_A; -- GitLab From c1bda44a4aedf13251b2704e6e67afb4909195c8 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 3 Oct 2005 10:20:47 -0500 Subject: [PATCH 0163/1519] When an assoc_resp is received the network structure is not completely initialized which can cause problems for drivers that expect the network structure to be completely filled in. This patch will make sure the network is filled in as much as possible. Signed-off-by: Ivo van Doorn Signed-off-by: James Ketrenos --- net/ieee80211/ieee80211_rx.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 3bf04d6d2b13..8d87d66c2a34 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -1106,10 +1106,41 @@ static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct iee //network->atim_window = le16_to_cpu(frame->aid) & (0x3FFF); network->atim_window = le16_to_cpu(frame->aid); network->listen_interval = le16_to_cpu(frame->status); + memcpy(network->bssid, frame->header.addr3, ETH_ALEN); + network->capability = le16_to_cpu(frame->capability); + network->last_scanned = jiffies; + network->rates_len = network->rates_ex_len = 0; + network->last_associate = 0; + network->ssid_len = 0; + network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ? 0x3 : 0x0; + + if (stats->freq == IEEE80211_52GHZ_BAND) { + /* for A band (No DS info) */ + network->channel = stats->received_channel; + } else + network->flags |= NETWORK_HAS_CCK; + + network->wpa_ie_len = 0; + network->rsn_ie_len = 0; if(ieee80211_parse_info_param(frame->info_element, stats->len - sizeof(*frame), network)) return 1; + network->mode = 0; + if (stats->freq == IEEE80211_52GHZ_BAND) + network->mode = IEEE_A; + else { + if (network->flags & NETWORK_HAS_OFDM) + network->mode |= IEEE_G; + if (network->flags & NETWORK_HAS_CCK) + network->mode |= IEEE_B; + } + + if (ieee80211_is_empty_essid(network->ssid, network->ssid_len)) + network->flags |= NETWORK_EMPTY_ESSID; + + memcpy(&network->stats, stats, sizeof(network->stats)); + if (ieee->handle_assoc_response != NULL) ieee->handle_assoc_response(dev, frame, network); @@ -1126,6 +1157,7 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i network->qos_data.active = 0; network->qos_data.supported = 0; network->qos_data.param_count = 0; + network->qos_data.old_param_count = 0; /* Pull out fixed field data */ memcpy(network->bssid, beacon->header.addr3, ETH_ALEN); -- GitLab From ff0037b259e8b47843176142131844bc80fd2887 Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Mon, 3 Oct 2005 10:23:42 -0500 Subject: [PATCH 0164/1519] Lindent and trailing whitespace script executed ieee80211 subsystem Signed-off-by: James Ketrenos --- include/net/ieee80211_crypt.h | 6 +++--- net/ieee80211/ieee80211_rx.c | 35 +++++++++++++++++++++-------------- 2 files changed, 24 insertions(+), 17 deletions(-) diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index 0c9d859d912e..0a1c2d82ca4b 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -26,7 +26,7 @@ #include enum { - IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1<<0), + IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0), }; struct ieee80211_crypto_ops { @@ -65,8 +65,8 @@ struct ieee80211_crypto_ops { char *(*print_stats) (char *p, void *priv); /* Crypto specific flag get/set for configuration settings */ - unsigned long (*get_flags)(void *priv); - unsigned long (*set_flags)(unsigned long flags, void *priv); + unsigned long (*get_flags) (void *priv); + unsigned long (*set_flags) (unsigned long flags, void *priv); /* maximum number of bytes added by encryption; encrypt buf is * allocated with extra_prefix_len bytes, copy of in_buf, and diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 8d87d66c2a34..6b005cb0caa0 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -917,8 +917,9 @@ static int ieee80211_parse_qos_info_param_IE(struct ieee80211_info_element return rc; } -static int ieee80211_parse_info_param(struct ieee80211_info_element *info_element, - u16 length, struct ieee80211_network *network) +static int ieee80211_parse_info_param(struct ieee80211_info_element + *info_element, u16 length, + struct ieee80211_network *network) { u8 i; #ifdef CONFIG_IEEE80211_DEBUG @@ -929,11 +930,11 @@ static int ieee80211_parse_info_param(struct ieee80211_info_element *info_elemen while (length >= sizeof(*info_element)) { if (sizeof(*info_element) + info_element->len > length) { IEEE80211_DEBUG_MGMT("Info elem: parse failed: " - "info_element->len + 2 > left : " - "info_element->len+2=%zd left=%d, id=%d.\n", - info_element->len + - sizeof(*info_element), - length, info_element->id); + "info_element->len + 2 > left : " + "info_element->len+2=%zd left=%d, id=%d.\n", + info_element->len + + sizeof(*info_element), + length, info_element->id); return 1; } @@ -954,7 +955,7 @@ static int ieee80211_parse_info_param(struct ieee80211_info_element *info_elemen IW_ESSID_MAX_SIZE - network->ssid_len); IEEE80211_DEBUG_MGMT("MFIE_TYPE_SSID: '%s' len=%d.\n", - network->ssid, network->ssid_len); + network->ssid, network->ssid_len); break; case MFIE_TYPE_RATES: @@ -1074,17 +1075,20 @@ static int ieee80211_parse_info_param(struct ieee80211_info_element *info_elemen break; case MFIE_TYPE_QOS_PARAMETER: - printk(KERN_ERR "QoS Error need to parse QOS_PARAMETER IE\n"); + printk(KERN_ERR + "QoS Error need to parse QOS_PARAMETER IE\n"); break; default: IEEE80211_DEBUG_MGMT("unsupported IE %d\n", - info_element->id); + info_element->id); break; } length -= sizeof(*info_element) + info_element->len; - info_element = (struct ieee80211_info_element *) &info_element->data[info_element->len]; + info_element = + (struct ieee80211_info_element *)&info_element-> + data[info_element->len]; } return 0; @@ -1112,7 +1116,8 @@ static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct iee network->rates_len = network->rates_ex_len = 0; network->last_associate = 0; network->ssid_len = 0; - network->erp_value = (network->capability & WLAN_CAPABILITY_IBSS) ? 0x3 : 0x0; + network->erp_value = + (network->capability & WLAN_CAPABILITY_IBSS) ? 0x3 : 0x0; if (stats->freq == IEEE80211_52GHZ_BAND) { /* for A band (No DS info) */ @@ -1123,7 +1128,8 @@ static int ieee80211_handle_assoc_resp(struct ieee80211_device *ieee, struct iee network->wpa_ie_len = 0; network->rsn_ie_len = 0; - if(ieee80211_parse_info_param(frame->info_element, stats->len - sizeof(*frame), network)) + if (ieee80211_parse_info_param + (frame->info_element, stats->len - sizeof(*frame), network)) return 1; network->mode = 0; @@ -1185,7 +1191,8 @@ static inline int ieee80211_network_init(struct ieee80211_device *ieee, struct i network->wpa_ie_len = 0; network->rsn_ie_len = 0; - if(ieee80211_parse_info_param(beacon->info_element, stats->len - sizeof(*beacon), network)) + if (ieee80211_parse_info_param + (beacon->info_element, stats->len - sizeof(*beacon), network)) return 1; network->mode = 0; -- GitLab From 644dd0cc494702ecd0698f467de113ace9593888 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 3 Oct 2005 15:55:19 -0400 Subject: [PATCH 0165/1519] [libata] improve device scan Replace SCSI's legacy "bang at the door" method of probing with one directly controlled by the underlying ATA transport layer. We now only call scsi_scan_target() for devices we find, rather than probing every possible channel/id within a certain range. --- drivers/scsi/libata-core.c | 2 +- drivers/scsi/libata-scsi.c | 12 ++++++++++++ drivers/scsi/libata.h | 1 + 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e5b01997117a..902c76364af7 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4113,7 +4113,7 @@ int ata_device_add(struct ata_probe_ent *ent) for (i = 0; i < count; i++) { struct ata_port *ap = host_set->ports[i]; - scsi_scan_host(ap->host); + ata_scsi_scan_host(ap); } dev_set_drvdata(dev, host_set); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 104fd9a63e73..4fc0134d4272 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1678,3 +1678,15 @@ void ata_scsi_simulate(u16 *id, } } +void ata_scsi_scan_host(struct ata_port *ap) +{ + unsigned int i; + + if (ap->flags & ATA_FLAG_PORT_DISABLED) + return; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_present(&ap->device[i])) + scsi_scan_target(&ap->host->shost_gendev, 0, i, ~0, 0); +} + diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d608b3a0f6fe..c7a1fa1c9abc 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -51,6 +51,7 @@ extern void swap_buf_le16(u16 *buf, unsigned int buf_words); /* libata-scsi.c */ +extern void ata_scsi_scan_host(struct ata_port *ap); extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, -- GitLab From ac17b8b57013a3e38d1958f66a218f15659e5752 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 3 Oct 2005 15:32:11 -0500 Subject: [PATCH 0166/1519] JFS: make special inodes play nicely with page balancing This patch fixes up a few problems with jfs's reserved inodes. 1. There is no need for the jfs code setting the I_DIRTY bits in i_state. I am ashamed that the code ever did this, and surprised it hasn't been noticed until now. 2. Make sure special inodes are on an inode hash list. If the inodes are unhashed, __mark_inode_dirty will fail to put the inode on the superblock's dirty list, and the data will not be flushed under memory pressure. 3. Force writing journal data to disk when metapage_writepage is unable to write a metadata page due to pending journal I/O. Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_dmap.c | 1 - fs/jfs/jfs_imap.c | 10 ++++++++-- fs/jfs/jfs_metapage.c | 6 ++++++ fs/jfs/jfs_txnmgr.c | 2 -- fs/jfs/super.c | 1 + 5 files changed, 15 insertions(+), 5 deletions(-) diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index eadf319bee22..51c02bf07878 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -305,7 +305,6 @@ int dbSync(struct inode *ipbmap) filemap_fdatawrite(ipbmap->i_mapping); filemap_fdatawait(ipbmap->i_mapping); - ipbmap->i_state |= I_DIRTY; diWriteSpecial(ipbmap, 0); return (0); diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c index 4021d46da7e3..28201b194f53 100644 --- a/fs/jfs/jfs_imap.c +++ b/fs/jfs/jfs_imap.c @@ -56,6 +56,12 @@ #include "jfs_superblock.h" #include "jfs_debug.h" +/* + * __mark_inode_dirty expects inodes to be hashed. Since we don't want + * special inodes in the fileset inode space, we hash them to a dummy head + */ +static HLIST_HEAD(aggregate_hash); + /* * imap locks */ @@ -491,6 +497,8 @@ struct inode *diReadSpecial(struct super_block *sb, ino_t inum, int secondary) /* release the page */ release_metapage(mp); + hlist_add_head(&ip->i_hash, &aggregate_hash); + return (ip); } @@ -514,8 +522,6 @@ void diWriteSpecial(struct inode *ip, int secondary) ino_t inum = ip->i_ino; struct metapage *mp; - ip->i_state &= ~I_DIRTY; - if (secondary) address = addressPXD(&sbi->ait2) >> sbi->l2nbperpage; else diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c index 13d7e3f1feb4..c81c6438fce5 100644 --- a/fs/jfs/jfs_metapage.c +++ b/fs/jfs/jfs_metapage.c @@ -395,6 +395,12 @@ static int metapage_writepage(struct page *page, struct writeback_control *wbc) if (mp->nohomeok && !test_bit(META_forcewrite, &mp->flag)) { redirty = 1; + /* + * Make sure this page isn't blocked indefinitely. + * If the journal isn't undergoing I/O, push it + */ + if (mp->log && !(mp->log->cflag & logGC_PAGEOUT)) + jfs_flush_journal(mp->log, 0); continue; } diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c index 9b71ed2674fe..b660c93c92de 100644 --- a/fs/jfs/jfs_txnmgr.c +++ b/fs/jfs/jfs_txnmgr.c @@ -2396,7 +2396,6 @@ static void txUpdateMap(struct tblock * tblk) */ if (tblk->xflag & COMMIT_CREATE) { diUpdatePMap(ipimap, tblk->ino, FALSE, tblk); - ipimap->i_state |= I_DIRTY; /* update persistent block allocation map * for the allocation of inode extent; */ @@ -2407,7 +2406,6 @@ static void txUpdateMap(struct tblock * tblk) } else if (tblk->xflag & COMMIT_DELETE) { ip = tblk->u.ip; diUpdatePMap(ipimap, ip->i_ino, TRUE, tblk); - ipimap->i_state |= I_DIRTY; iput(ip); } } diff --git a/fs/jfs/super.c b/fs/jfs/super.c index 71bc34b96b2b..4226af3ea91b 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -442,6 +442,7 @@ static int jfs_fill_super(struct super_block *sb, void *data, int silent) inode->i_nlink = 1; inode->i_size = sb->s_bdev->bd_inode->i_size; inode->i_mapping->a_ops = &jfs_metapage_aops; + insert_inode_hash(inode); mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS); sbi->direct_inode = inode; -- GitLab From 3f19ee8cb3a1003cb5183696bc55934f5865f868 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 3 Oct 2005 21:36:41 -0400 Subject: [PATCH 0167/1519] [libata] improve device scan even more Since our max_lun is unconditionally set to 1, we might as well hardcode a LUN 0 probe, rather than a wildcard LUN scan. The ide-scsi driver sets max_lun to a value greater than under certain conditions: if ((drive->id->last_lun & 0x7) != 7) host->max_lun = (drive->id->last_lun & 0x7) + 1; else host->max_lun = 1; last_lun is Word 126 of IDENTIFY PACKET DEVICE, marked as obsolete and undocumented in non-ancient specs. We'll leave it out for now. Should the need arise to support multi-LUN ATAPI devices, we'll probably want to add the above code. Finally, there have been reports of REPORT LUNS commands locking up ATAPI drives. Eliminating the wildcard LUN scan could help reduce the trouble from problematic drives. --- drivers/scsi/libata-scsi.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4fc0134d4272..8295a656e521 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1680,13 +1680,17 @@ void ata_scsi_simulate(u16 *id, void ata_scsi_scan_host(struct ata_port *ap) { + struct ata_device *dev; unsigned int i; if (ap->flags & ATA_FLAG_PORT_DISABLED) return; - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_present(&ap->device[i])) - scsi_scan_target(&ap->host->shost_gendev, 0, i, ~0, 0); + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_present(dev)) + scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); + } } -- GitLab From bab76198b3111bd0328be3c1fa208237eb12f86e Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 2 Oct 2005 17:18:58 -0700 Subject: [PATCH 0168/1519] [PATCH] hostap: Remove hw specific dev_open/close handlers Host AP driver used hardware model specific dev_open/close handlers that were called on dev_open/close if the hardware driver had registered the handler. These were only used for hostap_cs and only for tracking whether any of the netdevs were UP. This information is already available from local->num_dev_open, so there is not need for the special open/close handler. Let's get rid of these handlers. In addition to cleaning up the code, this fixes a module refcounting issue for hostap_cs where ejecting the card while any of the netdevs were open did not decrement refcount properly. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap.c | 6 --- drivers/net/wireless/hostap/hostap_cs.c | 45 +++++------------------ drivers/net/wireless/hostap/hostap_pci.c | 2 - drivers/net/wireless/hostap/hostap_plx.c | 2 - drivers/net/wireless/hostap/hostap_wlan.h | 2 - 5 files changed, 10 insertions(+), 47 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap.c b/drivers/net/wireless/hostap/hostap.c index e7f5821b4942..6a96cd9f2685 100644 --- a/drivers/net/wireless/hostap/hostap.c +++ b/drivers/net/wireless/hostap/hostap.c @@ -716,9 +716,6 @@ static int prism2_close(struct net_device *dev) hostap_deauth_all_stas(dev, local->ap, 1); #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - if (local->func->dev_close && local->func->dev_close(local)) - return 0; - if (dev == local->dev) { local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL); } @@ -766,9 +763,6 @@ static int prism2_open(struct net_device *dev) local->hw_downloading) return -ENODEV; - if (local->func->dev_open && local->func->dev_open(local)) - return 1; - if (!try_module_get(local->hw_module)) return -ENODEV; local->num_dev_open++; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index faa83badf0a1..23bcc51b7131 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -492,42 +492,10 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr) } -static int prism2_pccard_dev_open(local_info_t *local) -{ - struct hostap_cs_priv *hw_priv = local->hw_priv; - hw_priv->link->open++; - return 0; -} - - -static int prism2_pccard_dev_close(local_info_t *local) -{ - struct hostap_cs_priv *hw_priv; - - if (local == NULL || local->hw_priv == NULL) - return 1; - hw_priv = local->hw_priv; - if (hw_priv->link == NULL) - return 1; - - if (!hw_priv->link->open) { - printk(KERN_WARNING "%s: prism2_pccard_dev_close(): " - "link not open?!\n", local->dev->name); - return 1; - } - - hw_priv->link->open--; - - return 0; -} - - static struct prism2_helper_functions prism2_pccard_funcs = { .card_present = prism2_pccard_card_present, .cor_sreset = prism2_pccard_cor_sreset, - .dev_open = prism2_pccard_dev_open, - .dev_close = prism2_pccard_dev_close, .genesis_reset = prism2_pccard_genesis_reset, .hw_type = HOSTAP_HW_PCCARD, }; @@ -883,6 +851,13 @@ static int prism2_event(event_t event, int priority, { dev_link_t *link = args->client_data; struct net_device *dev = (struct net_device *) link->priv; + int dev_open = 0; + + if (link->state & DEV_CONFIG) { + struct hostap_interface *iface = netdev_priv(dev); + if (iface && iface->local) + dev_open = iface->local->num_dev_open > 0; + } switch (event) { case CS_EVENT_CARD_INSERTION: @@ -911,7 +886,7 @@ static int prism2_event(event_t event, int priority, case CS_EVENT_RESET_PHYSICAL: PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_RESET_PHYSICAL\n", dev_info); if (link->state & DEV_CONFIG) { - if (link->open) { + if (dev_open) { netif_stop_queue(dev); netif_device_detach(dev); } @@ -931,8 +906,8 @@ static int prism2_event(event_t event, int priority, pcmcia_request_configuration(link->handle, &link->conf); prism2_hw_shutdown(dev, 1); - prism2_hw_config(dev, link->open ? 0 : 1); - if (link->open) { + prism2_hw_config(dev, dev_open ? 0 : 1); + if (dev_open) { netif_device_attach(dev); netif_start_queue(dev); } diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index b9254f73fbaf..594cc29c6175 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -277,8 +277,6 @@ static struct prism2_helper_functions prism2_pci_funcs = { .card_present = NULL, .cor_sreset = prism2_pci_cor_sreset, - .dev_open = NULL, - .dev_close = NULL, .genesis_reset = prism2_pci_genesis_reset, .hw_type = HOSTAP_HW_PCI, }; diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 1abebdf48b20..85d3f8a29539 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -328,8 +328,6 @@ static struct prism2_helper_functions prism2_plx_funcs = { .card_present = NULL, .cor_sreset = prism2_plx_cor_sreset, - .dev_open = NULL, - .dev_close = NULL, .genesis_reset = prism2_plx_genesis_reset, .hw_type = HOSTAP_HW_PLX, }; diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index cc061e1560d3..cfd801559492 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -552,8 +552,6 @@ struct prism2_helper_functions { * (hostap_{cs,plx,pci}.c */ int (*card_present)(local_info_t *local); void (*cor_sreset)(local_info_t *local); - int (*dev_open)(local_info_t *local); - int (*dev_close)(local_info_t *local); void (*genesis_reset)(local_info_t *local, int hcr); /* the following functions are from hostap_hw.c, but they may have some -- GitLab From f7a74447553d698795ba74b7e17e916000b0cb08 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 2 Oct 2005 17:18:59 -0700 Subject: [PATCH 0169/1519] [PATCH] hostap: Fix hostap_pci build with PRISM2_IO_DEBUG The debug version of I/O functions in hostap_pci had not survived the change to start using hw_priv pointer, so let's fix them to actually define the local hw_priv variable. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_pci.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index 594cc29c6175..0d7305dfa690 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -59,11 +59,13 @@ static struct pci_device_id prism2_pci_id_table[] __devinitdata = { static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) { struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; local_info_t *local; unsigned long flags; iface = netdev_priv(dev); local = iface->local; + hw_priv = local->hw_priv; spin_lock_irqsave(&local->lock, flags); prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); @@ -74,12 +76,14 @@ static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) { struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; local_info_t *local; unsigned long flags; u8 v; iface = netdev_priv(dev); local = iface->local; + hw_priv = local->hw_priv; spin_lock_irqsave(&local->lock, flags); v = readb(hw_priv->mem_start + a); @@ -91,11 +95,13 @@ static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) { struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; local_info_t *local; unsigned long flags; iface = netdev_priv(dev); local = iface->local; + hw_priv = local->hw_priv; spin_lock_irqsave(&local->lock, flags); prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); @@ -106,12 +112,14 @@ static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) { struct hostap_interface *iface; + struct hostap_pci_priv *hw_priv; local_info_t *local; unsigned long flags; u16 v; iface = netdev_priv(dev); local = iface->local; + hw_priv = local->hw_priv; spin_lock_irqsave(&local->lock, flags); v = readw(hw_priv->mem_start + a); -- GitLab From c355184cd3cd58c9ffc78f2a17e0ac3563312ea7 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 2 Oct 2005 17:19:00 -0700 Subject: [PATCH 0170/1519] [PATCH] hostap: Do not free local->hw_priv before unregistering netdev local->hw_priv was being freed and set to NULL just before calling prism2_free_local_data(). However, this may expose a race condition in which something ends up trying to use hw_priv during shutdown. I haven't noticed this happening, but better be safe than sorry, so let's postpone hw_priv freeing to happen only after prism2_free_local_data() has returned. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_cs.c | 5 +++-- drivers/net/wireless/hostap/hostap_pci.c | 9 ++------- drivers/net/wireless/hostap/hostap_plx.c | 7 ++----- 3 files changed, 7 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 23bcc51b7131..2643976a6677 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -565,13 +565,14 @@ static void prism2_detach(dev_link_t *link) *linkp = link->next; /* release net devices */ if (link->priv) { + struct hostap_cs_priv *hw_priv; struct net_device *dev; struct hostap_interface *iface; dev = link->priv; iface = netdev_priv(dev); - kfree(iface->local->hw_priv); - iface->local->hw_priv = NULL; + hw_priv = iface->local->hw_priv; prism2_free_local_data(dev); + kfree(hw_priv); } kfree(link); } diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index 0d7305dfa690..da0c80fb941c 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -358,8 +358,6 @@ static int prism2_pci_probe(struct pci_dev *pdev, return hostap_hw_ready(dev); fail: - kfree(hw_priv); - if (irq_registered && dev) free_irq(dev->irq, dev); @@ -370,10 +368,8 @@ static int prism2_pci_probe(struct pci_dev *pdev, err_out_disable: pci_disable_device(pdev); - kfree(hw_priv); - if (local) - local->hw_priv = NULL; prism2_free_local_data(dev); + kfree(hw_priv); return -ENODEV; } @@ -398,9 +394,8 @@ static void prism2_pci_remove(struct pci_dev *pdev) free_irq(dev->irq, dev); mem_start = hw_priv->mem_start; - kfree(hw_priv); - iface->local->hw_priv = NULL; prism2_free_local_data(dev); + kfree(hw_priv); iounmap(mem_start); diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 85d3f8a29539..78d67b408b2f 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -568,10 +568,8 @@ static int prism2_plx_probe(struct pci_dev *pdev, return hostap_hw_ready(dev); fail: - kfree(hw_priv); - if (local) - local->hw_priv = NULL; prism2_free_local_data(dev); + kfree(hw_priv); if (irq_registered && dev) free_irq(dev->irq, dev); @@ -604,9 +602,8 @@ static void prism2_plx_remove(struct pci_dev *pdev) if (dev->irq) free_irq(dev->irq, dev); - kfree(iface->local->hw_priv); - iface->local->hw_priv = NULL; prism2_free_local_data(dev); + kfree(hw_priv); pci_disable_device(pdev); } -- GitLab From 7cb3cd090c2725b80561958a362c2ba15a7a8c86 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 2 Oct 2005 17:19:01 -0700 Subject: [PATCH 0171/1519] [PATCH] hostap: Unregister netdevs before freeing local data Unregister all netdevs before freeing local data. I was unable to trigger any crashes without this change when running busy loops for driver operations when ejecting a Prism2 PC Card. Anyway, should there be a race condition with this, better make it less likely to happen by unregistering the netdevs first. Signed-off-by: Jouni Malinen Signed-off-by: Jeff Garzik --- drivers/net/wireless/hostap/hostap_hw.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index e533a663deda..59fc15572395 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -3322,6 +3322,18 @@ static void prism2_free_local_data(struct net_device *dev) iface = netdev_priv(dev); local = iface->local; + /* Unregister all netdevs before freeing local data. */ + list_for_each_safe(ptr, n, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type == HOSTAP_INTERFACE_MASTER) { + /* special handling for this interface below */ + continue; + } + hostap_remove_interface(iface->dev, 0, 1); + } + + unregister_netdev(local->dev); + flush_scheduled_work(); if (timer_pending(&local->crypt_deinit_timer)) @@ -3382,15 +3394,6 @@ static void prism2_free_local_data(struct net_device *dev) prism2_download_free_data(local->dl_sec); #endif /* PRISM2_DOWNLOAD_SUPPORT */ - list_for_each_safe(ptr, n, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type == HOSTAP_INTERFACE_MASTER) { - /* special handling for this interface below */ - continue; - } - hostap_remove_interface(iface->dev, 0, 1); - } - prism2_clear_set_tim_queue(local); list_for_each_safe(ptr, n, &local->bss_list) { @@ -3403,7 +3406,6 @@ static void prism2_free_local_data(struct net_device *dev) kfree(local->last_scan_results); kfree(local->generic_elem); - unregister_netdev(local->dev); free_netdev(local->dev); } -- GitLab From 500f83abdc83d6bd472f3d103a9a9cd85df29a29 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 30 Sep 2005 10:19:19 +0200 Subject: [PATCH 0172/1519] [PATCH] s390: introducing support in qeth for new OSA CHPID type OSN This patch introduces new feature in qeth: qeth enhancement provides the device driver support for the Communication Controller for Linux on System z9 and zSeries (CCL), which is software that enables running the Network Control Program (NCP) on a zSeries machine. The OSA CDLC support is based on a new IBM mainframe CHPID type called Open Systems Adaper for NCP (OSN). In case of OSN qeth communicates with the type-OSN OSA-card on one hand, and with the CCL-kernel-component Network Device Handler (NDH) on the other. Signed-off-by: Frank Pavlic Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth.h | 45 +++- drivers/s390/net/qeth_fs.h | 12 +- drivers/s390/net/qeth_main.c | 419 ++++++++++++++++++++++++++--------- drivers/s390/net/qeth_mpc.c | 6 +- drivers/s390/net/qeth_mpc.h | 15 +- drivers/s390/net/qeth_sys.c | 28 ++- 6 files changed, 413 insertions(+), 112 deletions(-) diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h index 9963479ba89f..38a2441564d7 100644 --- a/drivers/s390/net/qeth.h +++ b/drivers/s390/net/qeth.h @@ -275,6 +275,10 @@ qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, enum qeth_ipa_funcs func) QETH_IDX_FUNC_LEVEL_IQD_ENA_IPAT, \ QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT, \ QETH_MAX_QUEUES,0x103}, \ + {0x1731,0x06,0x1732,0x06,QETH_CARD_TYPE_OSN,0, \ + QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT, \ + QETH_IDX_FUNC_LEVEL_OSAE_DIS_IPAT, \ + QETH_MAX_QUEUES,0}, \ {0,0,0,0,0,0,0,0,0}} #define QETH_REAL_CARD 1 @@ -363,10 +367,22 @@ struct qeth_hdr_layer2 { __u8 reserved2[16]; } __attribute__ ((packed)); +struct qeth_hdr_osn { + __u8 id; + __u8 reserved; + __u16 seq_no; + __u16 reserved2; + __u16 control_flags; + __u16 pdu_length; + __u8 reserved3[18]; + __u32 ccid; +} __attribute__ ((packed)); + struct qeth_hdr { union { struct qeth_hdr_layer2 l2; struct qeth_hdr_layer3 l3; + struct qeth_hdr_osn osn; } hdr; } __attribute__ ((packed)); @@ -413,6 +429,7 @@ enum qeth_header_ids { QETH_HEADER_TYPE_LAYER3 = 0x01, QETH_HEADER_TYPE_LAYER2 = 0x02, QETH_HEADER_TYPE_TSO = 0x03, + QETH_HEADER_TYPE_OSN = 0x04, }; /* flags for qeth_hdr.ext_flags */ #define QETH_HDR_EXT_VLAN_FRAME 0x01 @@ -582,7 +599,6 @@ enum qeth_card_states { * Protocol versions */ enum qeth_prot_versions { - QETH_PROT_SNA = 0x0001, QETH_PROT_IPV4 = 0x0004, QETH_PROT_IPV6 = 0x0006, }; @@ -761,6 +777,11 @@ enum qeth_threads { QETH_RECOVER_THREAD = 2, }; +struct qeth_osn_info { + int (*assist_cb)(struct net_device *dev, void *data); + int (*data_cb)(struct sk_buff *skb); +}; + struct qeth_card { struct list_head list; enum qeth_card_states state; @@ -803,6 +824,7 @@ struct qeth_card { int use_hard_stop; int (*orig_hard_header)(struct sk_buff *,struct net_device *, unsigned short,void *,void *,unsigned); + struct qeth_osn_info osn_info; }; struct qeth_card_list_struct { @@ -916,10 +938,12 @@ qeth_get_hlen(__u8 link_type) static inline unsigned short qeth_get_netdev_flags(struct qeth_card *card) { - if (card->options.layer2) + if (card->options.layer2 && + (card->info.type == QETH_CARD_TYPE_OSAE)) return 0; switch (card->info.type) { case QETH_CARD_TYPE_IQD: + case QETH_CARD_TYPE_OSN: return IFF_NOARP; #ifdef CONFIG_QETH_IPV6 default: @@ -956,9 +980,10 @@ static inline int qeth_get_max_mtu_for_card(int cardtype) { switch (cardtype) { + case QETH_CARD_TYPE_UNKNOWN: - return 61440; case QETH_CARD_TYPE_OSAE: + case QETH_CARD_TYPE_OSN: return 61440; case QETH_CARD_TYPE_IQD: return 57344; @@ -1004,6 +1029,7 @@ qeth_mtu_is_valid(struct qeth_card * card, int mtu) case QETH_CARD_TYPE_IQD: return ((mtu >= 576) && (mtu <= card->info.max_mtu + 4096 - 32)); + case QETH_CARD_TYPE_OSN: case QETH_CARD_TYPE_UNKNOWN: default: return 1; @@ -1015,6 +1041,7 @@ qeth_get_arphdr_type(int cardtype, int linktype) { switch (cardtype) { case QETH_CARD_TYPE_OSAE: + case QETH_CARD_TYPE_OSN: switch (linktype) { case QETH_LINK_TYPE_LANE_TR: case QETH_LINK_TYPE_HSTR: @@ -1182,4 +1209,16 @@ qeth_fill_header(struct qeth_card *, struct qeth_hdr *, extern void qeth_flush_buffers(struct qeth_qdio_out_q *, int, int, int); +extern int +qeth_osn_assist(struct net_device *, void *, int); + +extern int +qeth_osn_register(unsigned char *read_dev_no, + struct net_device **, + int (*assist_cb)(struct net_device *, void *), + int (*data_cb)(struct sk_buff *)); + +extern void +qeth_osn_deregister(struct net_device *); + #endif /* __QETH_H__ */ diff --git a/drivers/s390/net/qeth_fs.h b/drivers/s390/net/qeth_fs.h index 5c9a51ce91b6..c0b4c8d82c45 100644 --- a/drivers/s390/net/qeth_fs.h +++ b/drivers/s390/net/qeth_fs.h @@ -12,7 +12,7 @@ #ifndef __QETH_FS_H__ #define __QETH_FS_H__ -#define VERSION_QETH_FS_H "$Revision: 1.9 $" +#define VERSION_QETH_FS_H "$Revision: 1.10 $" extern const char *VERSION_QETH_PROC_C; extern const char *VERSION_QETH_SYS_C; @@ -42,6 +42,12 @@ qeth_create_device_attributes(struct device *dev); extern void qeth_remove_device_attributes(struct device *dev); +extern int +qeth_create_device_attributes_osn(struct device *dev); + +extern void +qeth_remove_device_attributes_osn(struct device *dev); + extern int qeth_create_driver_attributes(void); @@ -108,6 +114,8 @@ qeth_get_cardname(struct qeth_card *card) return " OSD Express"; case QETH_CARD_TYPE_IQD: return " HiperSockets"; + case QETH_CARD_TYPE_OSN: + return " OSN QDIO"; default: return " unknown"; } @@ -153,6 +161,8 @@ qeth_get_cardname_short(struct qeth_card *card) } case QETH_CARD_TYPE_IQD: return "HiperSockets"; + case QETH_CARD_TYPE_OSN: + return "OSN"; default: return "unknown"; } diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index bd28e2438d7f..692003c9f896 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -196,7 +196,6 @@ qeth_notifier_register(struct task_struct *p, int signum) { struct qeth_notify_list_struct *n_entry; - /*check first if entry already exists*/ spin_lock(&qeth_notify_lock); list_for_each_entry(n_entry, &qeth_notify_list, list) { @@ -1024,7 +1023,10 @@ qeth_set_intial_options(struct qeth_card *card) card->options.fake_broadcast = 0; card->options.add_hhlen = DEFAULT_ADD_HHLEN; card->options.fake_ll = 0; - card->options.layer2 = 0; + if (card->info.type == QETH_CARD_TYPE_OSN) + card->options.layer2 = 1; + else + card->options.layer2 = 0; } /** @@ -1113,19 +1115,20 @@ qeth_determine_card_type(struct qeth_card *card) QETH_DBF_TEXT(setup, 2, "detcdtyp"); + card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; + card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; while (known_devices[i][4]) { if ((CARD_RDEV(card)->id.dev_type == known_devices[i][2]) && (CARD_RDEV(card)->id.dev_model == known_devices[i][3])) { card->info.type = known_devices[i][4]; + card->qdio.no_out_queues = known_devices[i][8]; + card->info.is_multicast_different = known_devices[i][9]; if (is_1920_device(card)) { PRINT_INFO("Priority Queueing not able " "due to hardware limitations!\n"); card->qdio.no_out_queues = 1; card->qdio.default_out_queue = 0; - } else { - card->qdio.no_out_queues = known_devices[i][8]; - } - card->info.is_multicast_different = known_devices[i][9]; + } return 0; } i++; @@ -1149,6 +1152,8 @@ qeth_probe_device(struct ccwgroup_device *gdev) if (!get_device(dev)) return -ENODEV; + QETH_DBF_TEXT_(setup, 2, "%s", gdev->dev.bus_id); + card = qeth_alloc_card(); if (!card) { put_device(dev); @@ -1158,28 +1163,27 @@ qeth_probe_device(struct ccwgroup_device *gdev) card->read.ccwdev = gdev->cdev[0]; card->write.ccwdev = gdev->cdev[1]; card->data.ccwdev = gdev->cdev[2]; - - if ((rc = qeth_setup_card(card))){ - QETH_DBF_TEXT_(setup, 2, "2err%d", rc); - put_device(dev); - qeth_free_card(card); - return rc; - } gdev->dev.driver_data = card; card->gdev = gdev; gdev->cdev[0]->handler = qeth_irq; gdev->cdev[1]->handler = qeth_irq; gdev->cdev[2]->handler = qeth_irq; - rc = qeth_create_device_attributes(dev); - if (rc) { + if ((rc = qeth_determine_card_type(card))){ + PRINT_WARN("%s: not a valid card type\n", __func__); + QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + put_device(dev); + qeth_free_card(card); + return rc; + } + if ((rc = qeth_setup_card(card))){ + QETH_DBF_TEXT_(setup, 2, "2err%d", rc); put_device(dev); qeth_free_card(card); return rc; } - if ((rc = qeth_determine_card_type(card))){ - PRINT_WARN("%s: not a valid card type\n", __func__); - QETH_DBF_TEXT_(setup, 2, "3err%d", rc); + rc = qeth_create_device_attributes(dev); + if (rc) { put_device(dev); qeth_free_card(card); return rc; @@ -1660,6 +1664,8 @@ qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) netif_carrier_on(card->dev); qeth_schedule_recovery(card); return NULL; + case IPA_CMD_MODCCID: + return cmd; case IPA_CMD_REGISTER_LOCAL_ADDR: QETH_DBF_TEXT(trace,3, "irla"); break; @@ -1721,6 +1727,14 @@ qeth_send_control_data_cb(struct qeth_channel *channel, cmd = qeth_check_ipa_data(card, iob); if ((cmd == NULL) && (card->state != CARD_STATE_DOWN)) goto out; + /*in case of OSN : check if cmd is set */ + if (card->info.type == QETH_CARD_TYPE_OSN && + cmd && + cmd->hdr.command != IPA_CMD_STARTLAN && + card->osn_info.assist_cb != NULL) { + card->osn_info.assist_cb(card->dev, cmd); + goto out; + } spin_lock_irqsave(&card->lock, flags); list_for_each_entry_safe(reply, r, &card->cmd_waiter_list, list) { @@ -1737,8 +1751,7 @@ qeth_send_control_data_cb(struct qeth_channel *channel, keep_reply = reply->callback(card, reply, (unsigned long)cmd); - } - else + } else keep_reply = reply->callback(card, reply, (unsigned long)iob); @@ -1768,6 +1781,24 @@ qeth_send_control_data_cb(struct qeth_channel *channel, qeth_release_buffer(channel,iob); } +static inline void +qeth_prepare_control_data(struct qeth_card *card, int len, +struct qeth_cmd_buffer *iob) +{ + qeth_setup_ccw(&card->write,iob->data,len); + iob->callback = qeth_release_buffer; + + memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), + &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); + card->seqno.trans_hdr++; + memcpy(QETH_PDU_HEADER_SEQ_NO(iob->data), + &card->seqno.pdu_hdr, QETH_SEQ_NO_LENGTH); + card->seqno.pdu_hdr++; + memcpy(QETH_PDU_HEADER_ACK_SEQ_NO(iob->data), + &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH); + QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN); +} + static int qeth_send_control_data(struct qeth_card *card, int len, struct qeth_cmd_buffer *iob, @@ -1778,24 +1809,11 @@ qeth_send_control_data(struct qeth_card *card, int len, { int rc; unsigned long flags; - struct qeth_reply *reply; + struct qeth_reply *reply = NULL; struct timer_list timer; QETH_DBF_TEXT(trace, 2, "sendctl"); - qeth_setup_ccw(&card->write,iob->data,len); - - memcpy(QETH_TRANSPORT_HEADER_SEQ_NO(iob->data), - &card->seqno.trans_hdr, QETH_SEQ_NO_LENGTH); - card->seqno.trans_hdr++; - - memcpy(QETH_PDU_HEADER_SEQ_NO(iob->data), - &card->seqno.pdu_hdr, QETH_SEQ_NO_LENGTH); - card->seqno.pdu_hdr++; - memcpy(QETH_PDU_HEADER_ACK_SEQ_NO(iob->data), - &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH); - iob->callback = qeth_release_buffer; - reply = qeth_alloc_reply(card); if (!reply) { PRINT_WARN("Could no alloc qeth_reply!\n"); @@ -1810,10 +1828,6 @@ qeth_send_control_data(struct qeth_card *card, int len, init_timer(&timer); timer.function = qeth_cmd_timeout; timer.data = (unsigned long) reply; - if (IS_IPA(iob->data)) - timer.expires = jiffies + QETH_IPA_TIMEOUT; - else - timer.expires = jiffies + QETH_TIMEOUT; init_waitqueue_head(&reply->wait_q); spin_lock_irqsave(&card->lock, flags); list_add_tail(&reply->list, &card->cmd_waiter_list); @@ -1821,6 +1835,11 @@ qeth_send_control_data(struct qeth_card *card, int len, QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN); wait_event(card->wait_q, atomic_compare_and_swap(0,1,&card->write.irq_pending) == 0); + qeth_prepare_control_data(card, len, iob); + if (IS_IPA(iob->data)) + timer.expires = jiffies + QETH_IPA_TIMEOUT; + else + timer.expires = jiffies + QETH_TIMEOUT; QETH_DBF_TEXT(trace, 6, "noirqpnd"); spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags); rc = ccw_device_start(card->write.ccwdev, &card->write.ccw, @@ -1847,6 +1866,62 @@ qeth_send_control_data(struct qeth_card *card, int len, return rc; } +static int +qeth_osn_send_control_data(struct qeth_card *card, int len, + struct qeth_cmd_buffer *iob) +{ + unsigned long flags; + int rc = 0; + + QETH_DBF_TEXT(trace, 5, "osndctrd"); + + wait_event(card->wait_q, + atomic_compare_and_swap(0,1,&card->write.irq_pending) == 0); + qeth_prepare_control_data(card, len, iob); + QETH_DBF_TEXT(trace, 6, "osnoirqp"); + spin_lock_irqsave(get_ccwdev_lock(card->write.ccwdev), flags); + rc = ccw_device_start(card->write.ccwdev, &card->write.ccw, + (addr_t) iob, 0, 0); + spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); + if (rc){ + PRINT_WARN("qeth_osn_send_control_data: " + "ccw_device_start rc = %i\n", rc); + QETH_DBF_TEXT_(trace, 2, " err%d", rc); + qeth_release_buffer(iob->channel, iob); + atomic_set(&card->write.irq_pending, 0); + wake_up(&card->wait_q); + } + return rc; +} + +static inline void +qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, + char prot_type) +{ + memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); + memcpy(QETH_IPA_CMD_PROT_TYPE(iob->data),&prot_type,1); + memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), + &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); +} + +static int +qeth_osn_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, + int data_len) +{ + u16 s1, s2; + +QETH_DBF_TEXT(trace,4,"osndipa"); + + qeth_prepare_ipa_cmd(card, iob, QETH_PROT_OSN2); + s1 = (u16)(IPA_PDU_HEADER_SIZE + data_len); + s2 = (u16)data_len; + memcpy(QETH_IPA_PDU_LEN_TOTAL(iob->data), &s1, 2); + memcpy(QETH_IPA_PDU_LEN_PDU1(iob->data), &s2, 2); + memcpy(QETH_IPA_PDU_LEN_PDU2(iob->data), &s2, 2); + memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2); + return qeth_osn_send_control_data(card, s1, iob); +} + static int qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, int (*reply_cb) @@ -1858,17 +1933,14 @@ qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, QETH_DBF_TEXT(trace,4,"sendipa"); - memcpy(iob->data, IPA_PDU_HEADER, IPA_PDU_HEADER_SIZE); - if (card->options.layer2) - prot_type = QETH_PROT_LAYER2; + if (card->info.type == QETH_CARD_TYPE_OSN) + prot_type = QETH_PROT_OSN2; + else + prot_type = QETH_PROT_LAYER2; else prot_type = QETH_PROT_TCPIP; - - memcpy(QETH_IPA_CMD_PROT_TYPE(iob->data),&prot_type,1); - memcpy(QETH_IPA_CMD_DEST_ADDR(iob->data), - &card->token.ulp_connection_r, QETH_MPC_TOKEN_LENGTH); - + qeth_prepare_ipa_cmd(card,iob,prot_type); rc = qeth_send_control_data(card, IPA_CMD_LENGTH, iob, reply_cb, reply_param); return rc; @@ -2010,7 +2082,10 @@ qeth_ulp_enable(struct qeth_card *card) *(QETH_ULP_ENABLE_LINKNUM(iob->data)) = (__u8) card->info.portno; if (card->options.layer2) - prot_type = QETH_PROT_LAYER2; + if (card->info.type == QETH_CARD_TYPE_OSN) + prot_type = QETH_PROT_OSN2; + else + prot_type = QETH_PROT_LAYER2; else prot_type = QETH_PROT_TCPIP; @@ -2100,15 +2175,21 @@ qeth_check_for_inbound_error(struct qeth_qdio_buffer *buf, } static inline struct sk_buff * -qeth_get_skb(unsigned int length) +qeth_get_skb(unsigned int length, struct qeth_hdr *hdr) { struct sk_buff* skb; + int add_len; + + add_len = 0; + if (hdr->hdr.osn.id == QETH_HEADER_TYPE_OSN) + add_len = sizeof(struct qeth_hdr); #ifdef CONFIG_QETH_VLAN - if ((skb = dev_alloc_skb(length + VLAN_HLEN))) - skb_reserve(skb, VLAN_HLEN); -#else - skb = dev_alloc_skb(length); + else + add_len = VLAN_HLEN; #endif + skb = dev_alloc_skb(length + add_len); + if (skb && add_len) + skb_reserve(skb, add_len); return skb; } @@ -2138,7 +2219,10 @@ qeth_get_next_skb(struct qeth_card *card, struct qdio_buffer *buffer, offset += sizeof(struct qeth_hdr); if (card->options.layer2) - skb_len = (*hdr)->hdr.l2.pkt_length; + if (card->info.type == QETH_CARD_TYPE_OSN) + skb_len = (*hdr)->hdr.osn.pdu_length; + else + skb_len = (*hdr)->hdr.l2.pkt_length; else skb_len = (*hdr)->hdr.l3.length; @@ -2146,15 +2230,15 @@ qeth_get_next_skb(struct qeth_card *card, struct qdio_buffer *buffer, return NULL; if (card->options.fake_ll){ if(card->dev->type == ARPHRD_IEEE802_TR){ - if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_TR))) + if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_TR, *hdr))) goto no_mem; skb_reserve(skb,QETH_FAKE_LL_LEN_TR); } else { - if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_ETH))) + if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_ETH, *hdr))) goto no_mem; skb_reserve(skb,QETH_FAKE_LL_LEN_ETH); } - } else if (!(skb = qeth_get_skb(skb_len))) + } else if (!(skb = qeth_get_skb(skb_len, *hdr))) goto no_mem; data_ptr = element->addr + offset; while (skb_len) { @@ -2453,8 +2537,12 @@ qeth_process_inbound_buffer(struct qeth_card *card, skb->dev = card->dev; if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2) vlan_tag = qeth_layer2_rebuild_skb(card, skb, hdr); - else + else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3) qeth_rebuild_skb(card, skb, hdr); + else { /*in case of OSN*/ + skb_push(skb, sizeof(struct qeth_hdr)); + memcpy(skb->data, hdr, sizeof(struct qeth_hdr)); + } /* is device UP ? */ if (!(card->dev->flags & IFF_UP)){ dev_kfree_skb_any(skb); @@ -2465,7 +2553,10 @@ qeth_process_inbound_buffer(struct qeth_card *card, vlan_hwaccel_rx(skb, card->vlangrp, vlan_tag); else #endif - rxrc = netif_rx(skb); + if (card->info.type == QETH_CARD_TYPE_OSN) + rxrc = card->osn_info.data_cb(skb); + else + rxrc = netif_rx(skb); card->dev->last_rx = jiffies; card->stats.rx_packets++; card->stats.rx_bytes += skb->len; @@ -3150,8 +3241,6 @@ qeth_init_qdio_info(struct qeth_card *card) INIT_LIST_HEAD(&card->qdio.in_buf_pool.entry_list); INIT_LIST_HEAD(&card->qdio.init_pool.entry_list); /* outbound */ - card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; - card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; } static int @@ -3466,7 +3555,7 @@ qeth_mpc_initialize(struct qeth_card *card) return 0; out_qdio: - qeth_qdio_clear_card(card, card->info.type==QETH_CARD_TYPE_OSAE); + qeth_qdio_clear_card(card, card->info.type!=QETH_CARD_TYPE_IQD); return rc; } @@ -3491,6 +3580,9 @@ qeth_get_netdevice(enum qeth_card_types type, enum qeth_link_types linktype) case QETH_CARD_TYPE_IQD: dev = alloc_netdev(0, "hsi%d", ether_setup); break; + case QETH_CARD_TYPE_OSN: + dev = alloc_netdev(0, "osn%d", ether_setup); + break; default: dev = alloc_etherdev(0); } @@ -3655,7 +3747,8 @@ qeth_open(struct net_device *dev) if (card->state != CARD_STATE_SOFTSETUP) return -ENODEV; - if ( (card->options.layer2) && + if ( (card->info.type != QETH_CARD_TYPE_OSN) && + (card->options.layer2) && (!card->info.layer2_mac_registered)) { QETH_DBF_TEXT(trace,4,"nomacadr"); return -EPERM; @@ -3693,6 +3786,9 @@ qeth_get_cast_type(struct qeth_card *card, struct sk_buff *skb) { int cast_type = RTN_UNSPEC; + if (card->info.type == QETH_CARD_TYPE_OSN) + return cast_type; + if (skb->dst && skb->dst->neighbour){ cast_type = skb->dst->neighbour->type; if ((cast_type == RTN_BROADCAST) || @@ -3782,13 +3878,16 @@ static inline int qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb, struct qeth_hdr **hdr, int ipv) { - int rc; + int rc = 0; #ifdef CONFIG_QETH_VLAN u16 *tag; #endif QETH_DBF_TEXT(trace, 6, "prepskb"); - + if (card->info.type == QETH_CARD_TYPE_OSN) { + *hdr = (struct qeth_hdr *)(*skb)->data; + return rc; + } rc = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr)); if (rc) return rc; @@ -4291,8 +4390,14 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) } } } + if ((card->info.type == QETH_CARD_TYPE_OSN) && + (skb->protocol == htons(ETH_P_IPV6))) { + dev_kfree_skb_any(skb); + return 0; + } cast_type = qeth_get_cast_type(card, skb); - if ((cast_type == RTN_BROADCAST) && (card->info.broadcast_capable == 0)){ + if ((cast_type == RTN_BROADCAST) && + (card->info.broadcast_capable == 0)){ card->stats.tx_dropped++; card->stats.tx_errors++; dev_kfree_skb_any(skb); @@ -4320,7 +4425,8 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) QETH_DBF_TEXT_(trace, 4, "pskbe%d", rc); return rc; } - qeth_fill_header(card, hdr, skb, ipv, cast_type); + if (card->info.type != QETH_CARD_TYPE_OSN) + qeth_fill_header(card, hdr, skb, ipv, cast_type); } if (large_send == QETH_LARGE_SEND_EDDP) { @@ -4381,6 +4487,7 @@ qeth_mdio_read(struct net_device *dev, int phy_id, int regnum) case MII_BMCR: /* Basic mode control register */ rc = BMCR_FULLDPLX; if ((card->info.link_type != QETH_LINK_TYPE_GBIT_ETH)&& + (card->info.link_type != QETH_LINK_TYPE_OSN) && (card->info.link_type != QETH_LINK_TYPE_10GBIT_ETH)) rc |= BMCR_SPEED100; break; @@ -5004,6 +5111,9 @@ qeth_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) (card->state != CARD_STATE_SOFTSETUP)) return -ENODEV; + if (card->info.type == QETH_CARD_TYPE_OSN) + return -EPERM; + switch (cmd){ case SIOC_QETH_ARP_SET_NO_ENTRIES: if ( !capable(CAP_NET_ADMIN) || @@ -5329,6 +5439,9 @@ qeth_set_multicast_list(struct net_device *dev) { struct qeth_card *card = (struct qeth_card *) dev->priv; + if (card->info.type == QETH_CARD_TYPE_OSN) + return ; + QETH_DBF_TEXT(trace,3,"setmulti"); qeth_delete_mc_addresses(card); qeth_add_multicast_ipv4(card); @@ -5370,6 +5483,94 @@ qeth_get_addr_buffer(enum qeth_prot_versions prot) return addr; } +int +qeth_osn_assist(struct net_device *dev, + void *data, + int data_len) +{ + struct qeth_cmd_buffer *iob; + struct qeth_card *card; + int rc; + + QETH_DBF_TEXT(trace, 2, "osnsdmc"); + if (!dev) + return -ENODEV; + card = (struct qeth_card *)dev->priv; + if (!card) + return -ENODEV; + if ((card->state != CARD_STATE_UP) && + (card->state != CARD_STATE_SOFTSETUP)) + return -ENODEV; + iob = qeth_wait_for_buffer(&card->write); + memcpy(iob->data+IPA_PDU_HEADER_SIZE, data, data_len); + rc = qeth_osn_send_ipa_cmd(card, iob, data_len); + return rc; +} + +static struct net_device * +qeth_netdev_by_devno(unsigned char *read_dev_no) +{ + struct qeth_card *card; + struct net_device *ndev; + unsigned char *readno; + __u16 temp_dev_no, card_dev_no; + char *endp; + unsigned long flags; + + ndev = NULL; + memcpy(&temp_dev_no, read_dev_no, 2); + read_lock_irqsave(&qeth_card_list.rwlock, flags); + list_for_each_entry(card, &qeth_card_list.list, list) { + readno = CARD_RDEV_ID(card); + readno += (strlen(readno) - 4); + card_dev_no = simple_strtoul(readno, &endp, 16); + if (card_dev_no == temp_dev_no) { + ndev = card->dev; + break; + } + } + read_unlock_irqrestore(&qeth_card_list.rwlock, flags); + return ndev; +} + +int +qeth_osn_register(unsigned char *read_dev_no, + struct net_device **dev, + int (*assist_cb)(struct net_device *, void *), + int (*data_cb)(struct sk_buff *)) +{ + struct qeth_card * card; + + QETH_DBF_TEXT(trace, 2, "osnreg"); + *dev = qeth_netdev_by_devno(read_dev_no); + if (*dev == NULL) + return -ENODEV; + card = (struct qeth_card *)(*dev)->priv; + if (!card) + return -ENODEV; + if ((assist_cb == NULL) || (data_cb == NULL)) + return -EINVAL; + card->osn_info.assist_cb = assist_cb; + card->osn_info.data_cb = data_cb; + return 0; +} + +void +qeth_osn_deregister(struct net_device * dev) +{ + struct qeth_card *card; + + QETH_DBF_TEXT(trace, 2, "osndereg"); + if (!dev) + return; + card = (struct qeth_card *)dev->priv; + if (!card) + return; + card->osn_info.assist_cb = NULL; + card->osn_info.data_cb = NULL; + return; +} + static void qeth_delete_mc_addresses(struct qeth_card *card) { @@ -5700,6 +5901,12 @@ qeth_layer2_set_mac_address(struct net_device *dev, void *p) QETH_DBF_TEXT(trace, 3, "setmcLY3"); return -EOPNOTSUPP; } + if (card->info.type == QETH_CARD_TYPE_OSN) { + PRINT_WARN("Setting MAC address on %s is not supported.\n", + dev->name); + QETH_DBF_TEXT(trace, 3, "setmcOSN"); + return -EOPNOTSUPP; + } QETH_DBF_TEXT_(trace, 3, "%s", CARD_BUS_ID(card)); QETH_DBF_HEX(trace, 3, addr->sa_data, OSA_ADDR_LEN); rc = qeth_layer2_send_delmac(card, &card->dev->dev_addr[0]); @@ -6076,9 +6283,8 @@ qeth_netdev_init(struct net_device *dev) qeth_get_hlen(card->info.link_type) + card->options.add_hhlen; dev->addr_len = OSA_ADDR_LEN; dev->mtu = card->info.initial_mtu; - - SET_ETHTOOL_OPS(dev, &qeth_ethtool_ops); - + if (card->info.type != QETH_CARD_TYPE_OSN) + SET_ETHTOOL_OPS(dev, &qeth_ethtool_ops); SET_MODULE_OWNER(dev); return 0; } @@ -6095,6 +6301,7 @@ qeth_init_func_level(struct qeth_card *card) QETH_IDX_FUNC_LEVEL_OSAE_ENA_IPAT; } else { if (card->info.type == QETH_CARD_TYPE_IQD) + /*FIXME:why do we have same values for dis and ena for osae??? */ card->info.func_level = QETH_IDX_FUNC_LEVEL_IQD_DIS_IPAT; else @@ -6124,7 +6331,7 @@ qeth_hardsetup_card(struct qeth_card *card) ccw_device_set_online(CARD_WDEV(card)); ccw_device_set_online(CARD_DDEV(card)); } - rc = qeth_qdio_clear_card(card,card->info.type==QETH_CARD_TYPE_OSAE); + rc = qeth_qdio_clear_card(card,card->info.type!=QETH_CARD_TYPE_IQD); if (rc == -ERESTARTSYS) { QETH_DBF_TEXT(setup, 2, "break1"); return rc; @@ -6176,8 +6383,8 @@ qeth_hardsetup_card(struct qeth_card *card) card->dev = qeth_get_netdevice(card->info.type, card->info.link_type); if (!card->dev){ - qeth_qdio_clear_card(card, card->info.type == - QETH_CARD_TYPE_OSAE); + qeth_qdio_clear_card(card, card->info.type != + QETH_CARD_TYPE_IQD); rc = -ENODEV; QETH_DBF_TEXT_(setup, 2, "6err%d", rc); goto out; @@ -7084,6 +7291,8 @@ qeth_softsetup_card(struct qeth_card *card) return rc; } else card->lan_online = 1; + if (card->info.type==QETH_CARD_TYPE_OSN) + goto out; if (card->options.layer2) { card->dev->features |= NETIF_F_HW_VLAN_FILTER | @@ -7255,7 +7464,8 @@ qeth_stop_card(struct qeth_card *card, int recovery_mode) if (card->read.state == CH_STATE_UP && card->write.state == CH_STATE_UP && (card->state == CARD_STATE_UP)) { - if(recovery_mode) { + if (recovery_mode && + card->info.type != QETH_CARD_TYPE_OSN) { qeth_stop(card->dev); } else { rtnl_lock(); @@ -7437,7 +7647,8 @@ qeth_start_again(struct qeth_card *card, int recovery_mode) { QETH_DBF_TEXT(setup ,2, "startag"); - if(recovery_mode) { + if (recovery_mode && + card->info.type != QETH_CARD_TYPE_OSN) { qeth_open(card->dev); } else { rtnl_lock(); @@ -7469,33 +7680,36 @@ qeth_start_again(struct qeth_card *card, int recovery_mode) static void qeth_make_parameters_consistent(struct qeth_card *card) { - if (card->options.layer2) { - if (card->info.type == QETH_CARD_TYPE_IQD) { - PRINT_ERR("Device %s does not support " \ - "layer 2 functionality. " \ - "Ignoring layer2 option.\n",CARD_BUS_ID(card)); - } - IGNORE_PARAM_NEQ(route4.type, NO_ROUTER, NO_ROUTER, - "Routing options are"); + if (card->options.layer2 == 0) + return; + if (card->info.type == QETH_CARD_TYPE_OSN) + return; + if (card->info.type == QETH_CARD_TYPE_IQD) { + PRINT_ERR("Device %s does not support layer 2 functionality." \ + " Ignoring layer2 option.\n",CARD_BUS_ID(card)); + card->options.layer2 = 0; + return; + } + IGNORE_PARAM_NEQ(route4.type, NO_ROUTER, NO_ROUTER, + "Routing options are"); #ifdef CONFIG_QETH_IPV6 - IGNORE_PARAM_NEQ(route6.type, NO_ROUTER, NO_ROUTER, - "Routing options are"); + IGNORE_PARAM_NEQ(route6.type, NO_ROUTER, NO_ROUTER, + "Routing options are"); #endif - IGNORE_PARAM_EQ(checksum_type, HW_CHECKSUMMING, - QETH_CHECKSUM_DEFAULT, - "Checksumming options are"); - IGNORE_PARAM_NEQ(broadcast_mode, QETH_TR_BROADCAST_ALLRINGS, - QETH_TR_BROADCAST_ALLRINGS, - "Broadcast mode options are"); - IGNORE_PARAM_NEQ(macaddr_mode, QETH_TR_MACADDR_NONCANONICAL, - QETH_TR_MACADDR_NONCANONICAL, - "Canonical MAC addr options are"); - IGNORE_PARAM_NEQ(fake_broadcast, 0, 0, - "Broadcast faking options are"); - IGNORE_PARAM_NEQ(add_hhlen, DEFAULT_ADD_HHLEN, - DEFAULT_ADD_HHLEN,"Option add_hhlen is"); - IGNORE_PARAM_NEQ(fake_ll, 0, 0,"Option fake_ll is"); - } + IGNORE_PARAM_EQ(checksum_type, HW_CHECKSUMMING, + QETH_CHECKSUM_DEFAULT, + "Checksumming options are"); + IGNORE_PARAM_NEQ(broadcast_mode, QETH_TR_BROADCAST_ALLRINGS, + QETH_TR_BROADCAST_ALLRINGS, + "Broadcast mode options are"); + IGNORE_PARAM_NEQ(macaddr_mode, QETH_TR_MACADDR_NONCANONICAL, + QETH_TR_MACADDR_NONCANONICAL, + "Canonical MAC addr options are"); + IGNORE_PARAM_NEQ(fake_broadcast, 0, 0, + "Broadcast faking options are"); + IGNORE_PARAM_NEQ(add_hhlen, DEFAULT_ADD_HHLEN, + DEFAULT_ADD_HHLEN,"Option add_hhlen is"); + IGNORE_PARAM_NEQ(fake_ll, 0, 0,"Option fake_ll is"); } @@ -7525,8 +7739,7 @@ __qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode) return -EIO; } - if (card->options.layer2) - qeth_make_parameters_consistent(card); + qeth_make_parameters_consistent(card); if ((rc = qeth_hardsetup_card(card))){ QETH_DBF_TEXT_(setup, 2, "2err%d", rc); @@ -7585,6 +7798,7 @@ qeth_set_online(struct ccwgroup_device *gdev) static struct ccw_device_id qeth_ids[] = { {CCW_DEVICE(0x1731, 0x01), driver_info:QETH_CARD_TYPE_OSAE}, {CCW_DEVICE(0x1731, 0x05), driver_info:QETH_CARD_TYPE_IQD}, + {CCW_DEVICE(0x1731, 0x06), driver_info:QETH_CARD_TYPE_OSN}, {}, }; MODULE_DEVICE_TABLE(ccw, qeth_ids); @@ -8329,6 +8543,9 @@ __exit qeth_exit(void) printk("qeth: removed\n"); } +EXPORT_SYMBOL(qeth_osn_register); +EXPORT_SYMBOL(qeth_osn_deregister); +EXPORT_SYMBOL(qeth_osn_assist); module_init(qeth_init); module_exit(qeth_exit); MODULE_AUTHOR("Frank Pavlic "); diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c index f685ecc7da99..30e053d3cac2 100644 --- a/drivers/s390/net/qeth_mpc.c +++ b/drivers/s390/net/qeth_mpc.c @@ -11,7 +11,7 @@ #include #include "qeth_mpc.h" -const char *VERSION_QETH_MPC_C = "$Revision: 1.11 $"; +const char *VERSION_QETH_MPC_C = "$Revision: 1.12 $"; unsigned char IDX_ACTIVATE_READ[]={ 0x00,0x00,0x80,0x00, 0x00,0x00,0x00,0x00, @@ -138,7 +138,9 @@ unsigned char IPA_PDU_HEADER[]={ sizeof(struct qeth_ipa_cmd)%256, 0x00, sizeof(struct qeth_ipa_cmd)/256, - sizeof(struct qeth_ipa_cmd),0x05, 0x77,0x77,0x77,0x77, + sizeof(struct qeth_ipa_cmd)%256, + 0x05, + 0x77,0x77,0x77,0x77, 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, 0x01,0x00, sizeof(struct qeth_ipa_cmd)/256, diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h index 3d916b5c5d09..7edc5f1fc0d2 100644 --- a/drivers/s390/net/qeth_mpc.h +++ b/drivers/s390/net/qeth_mpc.h @@ -46,13 +46,16 @@ extern unsigned char IPA_PDU_HEADER[]; /* IP Assist related definitions */ /*****************************************************************************/ #define IPA_CMD_INITIATOR_HOST 0x00 -#define IPA_CMD_INITIATOR_HYDRA 0x01 +#define IPA_CMD_INITIATOR_OSA 0x01 +#define IPA_CMD_INITIATOR_HOST_REPLY 0x80 +#define IPA_CMD_INITIATOR_OSA_REPLY 0x81 #define IPA_CMD_PRIM_VERSION_NO 0x01 enum qeth_card_types { QETH_CARD_TYPE_UNKNOWN = 0, QETH_CARD_TYPE_OSAE = 10, QETH_CARD_TYPE_IQD = 1234, + QETH_CARD_TYPE_OSN = 11, }; #define QETH_MPC_DIFINFO_LEN_INDICATES_LINK_TYPE 0x18 @@ -61,6 +64,7 @@ enum qeth_link_types { QETH_LINK_TYPE_FAST_ETH = 0x01, QETH_LINK_TYPE_HSTR = 0x02, QETH_LINK_TYPE_GBIT_ETH = 0x03, + QETH_LINK_TYPE_OSN = 0x04, QETH_LINK_TYPE_10GBIT_ETH = 0x10, QETH_LINK_TYPE_LANE_ETH100 = 0x81, QETH_LINK_TYPE_LANE_TR = 0x82, @@ -111,6 +115,9 @@ enum qeth_ipa_cmds { IPA_CMD_DELGMAC = 0x24, IPA_CMD_SETVLAN = 0x25, IPA_CMD_DELVLAN = 0x26, + IPA_CMD_SETCCID = 0x41, + IPA_CMD_DELCCID = 0x42, + IPA_CMD_MODCCID = 0x43, IPA_CMD_SETIP = 0xb1, IPA_CMD_DELIP = 0xb7, IPA_CMD_QIPASSIST = 0xb2, @@ -437,8 +444,9 @@ enum qeth_ipa_arp_return_codes { #define QETH_ARP_DATA_SIZE 3968 #define QETH_ARP_CMD_LEN (QETH_ARP_DATA_SIZE + 8) /* Helper functions */ -#define IS_IPA_REPLY(cmd) (cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) - +#define IS_IPA_REPLY(cmd) ((cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) || \ + (cmd->hdr.initiator == IPA_CMD_INITIATOR_OSA_REPLY)) + /*****************************************************************************/ /* END OF IP Assist related definitions */ /*****************************************************************************/ @@ -483,6 +491,7 @@ extern unsigned char ULP_ENABLE[]; /* Layer 2 defintions */ #define QETH_PROT_LAYER2 0x08 #define QETH_PROT_TCPIP 0x03 +#define QETH_PROT_OSN2 0x0a #define QETH_ULP_ENABLE_PROT_TYPE(buffer) (buffer+0x50) #define QETH_IPA_CMD_PROT_TYPE(buffer) (buffer+0x19) diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c index dda105b73063..f91a02db5743 100644 --- a/drivers/s390/net/qeth_sys.c +++ b/drivers/s390/net/qeth_sys.c @@ -1,6 +1,6 @@ /* * - * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.54 $) + * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.55 $) * * Linux on zSeries OSA Express and HiperSockets support * This file contains code related to sysfs. @@ -20,7 +20,7 @@ #include "qeth_mpc.h" #include "qeth_fs.h" -const char *VERSION_QETH_SYS_C = "$Revision: 1.54 $"; +const char *VERSION_QETH_SYS_C = "$Revision: 1.55 $"; /*****************************************************************************/ /* */ @@ -937,6 +937,19 @@ static struct attribute_group qeth_device_attr_group = { .attrs = (struct attribute **)qeth_device_attrs, }; +static struct device_attribute * qeth_osn_device_attrs[] = { + &dev_attr_state, + &dev_attr_chpid, + &dev_attr_if_name, + &dev_attr_card_type, + &dev_attr_buffer_count, + &dev_attr_recover, + NULL, +}; + +static struct attribute_group qeth_osn_device_attr_group = { + .attrs = (struct attribute **)qeth_osn_device_attrs, +}; #define QETH_DEVICE_ATTR(_id,_name,_mode,_show,_store) \ struct device_attribute dev_attr_##_id = { \ @@ -1667,7 +1680,12 @@ int qeth_create_device_attributes(struct device *dev) { int ret; + struct qeth_card *card = dev->driver_data; + if (card->info.type == QETH_CARD_TYPE_OSN) + return sysfs_create_group(&dev->kobj, + &qeth_osn_device_attr_group); + if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_attr_group))) return ret; if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_ipato_group))){ @@ -1693,6 +1711,12 @@ qeth_create_device_attributes(struct device *dev) void qeth_remove_device_attributes(struct device *dev) { + struct qeth_card *card = dev->driver_data; + + if (card->info.type == QETH_CARD_TYPE_OSN) + return sysfs_remove_group(&dev->kobj, + &qeth_osn_device_attr_group); + sysfs_remove_group(&dev->kobj, &qeth_device_attr_group); sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group); sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group); -- GitLab From 31961943e3110c5a1c36b1e0069c29f7c4380e51 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Fri, 30 Sep 2005 01:36:00 -0400 Subject: [PATCH 0173/1519] [PATCH] libata: Marvell SATA support (DMA mode) (resend: v0.22) This is my libata compatible low level driver for the Marvell SATA family. Currently it runs in DMA mode on a 6081 chip. The 5xxx series parts are not yet DMA capable in this driver because the registers have differences that haven't been accounted for yet. Basically, I'm focused on the 6xxx series right now. I apologize for those seeing problems on the 5xxx series, I've not had a chance to look at those problems yet. For those curious, the previous bug causing the SCSI timeout and subsequent panics was caused by an improper clear of hc_irq_cause in mv_host_intr(). This version is running well in my environment (6081 chips, with/without SW raid1) and is showing equal or better performance compared to the Marvell driver (mv_sata) in my initial tests (timed dd's of reads/writes to/from memory/disk). I still need to look at the causes of occasional problems such as this: ata11: translating stat 0x35 err 0x00 to sense ata11: status=0x35 { DeviceFault SeekComplete CorrectedError Error } SCSI error : <10 0 0 0> return code = 0x8000002 Current sda: sense key Hardware Error end_request: I/O error, dev sda, sector 3155010 and this, seen at init time: ATA: abnormal status 0x80 on port 0xE093911C but they aren't showstoppers. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 938 ++++++++++++++++++++++++++++++++--------- 1 file changed, 749 insertions(+), 189 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ea76fe44585e..ecda7df21142 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.12" +#define DRV_VERSION "0.22" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -55,31 +55,61 @@ enum { MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, - MV_Q_CT = 32, - MV_CRQB_SZ = 32, - MV_CRPB_SZ = 8, + MV_USE_Q_DEPTH = ATA_DEF_QUEUE, - MV_DMA_BOUNDARY = 0xffffffffU, - SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)), + MV_MAX_Q_DEPTH = 32, + MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, + + /* CRQB needs alignment on a 1KB boundary. Size == 1KB + * CRPB needs alignment on a 256B boundary. Size == 256B + * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB + * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B + */ + MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), + MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), + MV_MAX_SG_CT = 176, + MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), + MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), + + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, MV_PORTS_PER_HC = 4, /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ MV_PORT_HC_SHIFT = 2, - /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */ + /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */ MV_PORT_MASK = 3, /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_FLAG_BDMA = (1 << 28), /* Basic DMA */ + MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */ + MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), + MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | + MV_FLAG_GLBL_SFT_RST), chip_504x = 0, chip_508x = 1, chip_604x = 2, chip_608x = 3, + CRQB_FLAG_READ = (1 << 0), + CRQB_TAG_SHIFT = 1, + CRQB_CMD_ADDR_SHIFT = 8, + CRQB_CMD_CS = (0x2 << 11), + CRQB_CMD_LAST = (1 << 15), + + CRPB_FLAG_STATUS_SHIFT = 8, + + EPRD_FLAG_END_OF_TBL = (1 << 31), + /* PCI interface registers */ + PCI_COMMAND_OFS = 0xc00, + PCI_MAIN_CMD_STS_OFS = 0xd30, STOP_PCI_MASTER = (1 << 2), PCI_MASTER_EMPTY = (1 << 3), @@ -111,20 +141,13 @@ enum { HC_CFG_OFS = 0, HC_IRQ_CAUSE_OFS = 0x14, - CRBP_DMA_DONE = (1 << 0), /* shift by port # */ + CRPB_DMA_DONE = (1 << 0), /* shift by port # */ HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ /* Shadow block registers */ - SHD_PIO_DATA_OFS = 0x100, - SHD_FEA_ERR_OFS = 0x104, - SHD_SECT_CNT_OFS = 0x108, - SHD_LBA_L_OFS = 0x10C, - SHD_LBA_M_OFS = 0x110, - SHD_LBA_H_OFS = 0x114, - SHD_DEV_HD_OFS = 0x118, - SHD_CMD_STA_OFS = 0x11C, - SHD_CTL_AST_OFS = 0x120, + SHD_BLK_OFS = 0x100, + SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ /* SATA registers */ SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ @@ -132,6 +155,11 @@ enum { /* Port registers */ EDMA_CFG_OFS = 0, + EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */ + EDMA_CFG_NCQ = (1 << 5), + EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ + EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ + EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ EDMA_ERR_IRQ_CAUSE_OFS = 0x8, EDMA_ERR_IRQ_MASK_OFS = 0xc, @@ -161,33 +189,85 @@ enum { EDMA_ERR_LNK_DATA_TX | EDMA_ERR_TRANS_PROTO), + EDMA_REQ_Q_BASE_HI_OFS = 0x10, + EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_REQ_Q_OUT_PTR_OFS = 0x18, + EDMA_REQ_Q_PTR_SHIFT = 5, + + EDMA_RSP_Q_BASE_HI_OFS = 0x1c, + EDMA_RSP_Q_IN_PTR_OFS = 0x20, + EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, + EDMA_RSP_Q_PTR_SHIFT = 3, + EDMA_CMD_OFS = 0x28, EDMA_EN = (1 << 0), EDMA_DS = (1 << 1), ATA_RST = (1 << 2), - /* BDMA is 6xxx part only */ - BDMA_CMD_OFS = 0x224, - BDMA_START = (1 << 0), + /* Host private flags (hp_flags) */ + MV_HP_FLAG_MSI = (1 << 0), - MV_UNDEF = 0, + /* Port private flags (pp_flags) */ + MV_PP_FLAG_EDMA_EN = (1 << 0), + MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; -struct mv_port_priv { +/* Command ReQuest Block: 32B */ +struct mv_crqb { + u32 sg_addr; + u32 sg_addr_hi; + u16 ctrl_flags; + u16 ata_cmd[11]; +}; +/* Command ResPonse Block: 8B */ +struct mv_crpb { + u16 id; + u16 flags; + u32 tmstmp; }; -struct mv_host_priv { +/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ +struct mv_sg { + u32 addr; + u32 flags_size; + u32 addr_hi; + u32 reserved; +}; +struct mv_port_priv { + struct mv_crqb *crqb; + dma_addr_t crqb_dma; + struct mv_crpb *crpb; + dma_addr_t crpb_dma; + struct mv_sg *sg_tbl; + dma_addr_t sg_tbl_dma; + + unsigned req_producer; /* cp of req_in_ptr */ + unsigned rsp_consumer; /* cp of rsp_out_ptr */ + u32 pp_flags; +}; + +struct mv_host_priv { + u32 hp_flags; }; static void mv_irq_clear(struct ata_port *ap); static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static u8 mv_check_err(struct ata_port *ap); static void mv_phy_reset(struct ata_port *ap); -static int mv_master_reset(void __iomem *mmio_base); +static void mv_host_stop(struct ata_host_set *host_set); +static int mv_port_start(struct ata_port *ap); +static void mv_port_stop(struct ata_port *ap); +static void mv_qc_prep(struct ata_queued_cmd *qc); +static int mv_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void mv_eng_timeout(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static Scsi_Host_Template mv_sht = { @@ -196,13 +276,13 @@ static Scsi_Host_Template mv_sht = { .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .eh_strategy_handler = ata_scsi_error, - .can_queue = ATA_DEF_QUEUE, + .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_UNDEF, + .sg_tablesize = MV_MAX_SG_CT, .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, - .use_clustering = MV_UNDEF, + .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = MV_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, @@ -216,15 +296,16 @@ static struct ata_port_operations mv_ops = { .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, + .check_err = mv_check_err, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .phy_reset = mv_phy_reset, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, - .eng_timeout = ata_eng_timeout, + .eng_timeout = mv_eng_timeout, .irq_handler = mv_interrupt, .irq_clear = mv_irq_clear, @@ -232,46 +313,39 @@ static struct ata_port_operations mv_ops = { .scr_read = mv_scr_read, .scr_write = mv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, }; static struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = MV_COMMON_FLAGS, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_508x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_604x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC | - MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, }; @@ -306,12 +380,6 @@ static inline void writelfl(unsigned long data, void __iomem *addr) (void) readl(addr); /* flush to avoid PCI posted write */ } -static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio) -{ - return ((void __iomem *)((unsigned long)port_mmio & - (unsigned long)SATAHC_MASK)); -} - static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) { return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); @@ -329,24 +397,141 @@ static inline void __iomem *mv_ap_base(struct ata_port *ap) return mv_port_base(ap->host_set->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long flags) +static inline int mv_get_hc_count(unsigned long hp_flags) +{ + return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1); +} + +static void mv_irq_clear(struct ata_port *ap) { - return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1); } -static inline int mv_is_edma_active(struct ata_port *ap) +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp, + struct ata_port *ap) { - void __iomem *port_mmio = mv_ap_base(ap); - return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + + spin_unlock_irqrestore(&ap->host_set->lock, flags); } -static inline int mv_port_bdma_capable(struct ata_port *ap) +static void mv_stop_dma(struct ata_port *ap) { - return (ap->flags & MV_FLAG_BDMA); + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + u32 reg; + int i; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + if (!(MV_PP_FLAG_EDMA_DS_ACT & pp->pp_flags) && + ((MV_PP_FLAG_EDMA_EN & pp->pp_flags) || + (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)))) { + /* Disable EDMA if we're not already trying to disable it + * and it is currently active. The disable bit auto clears. + */ + pp->pp_flags |= MV_PP_FLAG_EDMA_DS_ACT; + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + /* now properly wait for the eDMA to stop */ + for (i = 1000; i > 0; i--) { + reg = readl(port_mmio + EDMA_CMD_OFS); + if (!(EDMA_EN & reg)) { + break; + } + udelay(100); + } + + spin_lock_irqsave(&ap->host_set->lock, flags); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_DS_ACT; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (EDMA_EN & reg) { + printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + } } -static void mv_irq_clear(struct ata_port *ap) +static void mv_dump_mem(void __iomem *start, unsigned bytes) { +#ifdef ATA_DEBUG + int b, w; + for (b = 0; b < bytes; ) { + DPRINTK("%p: ", start + b); + for (w = 0; b < bytes && w < 4; w++) { + printk("%08x ",readl(start + b)); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) +{ +#ifdef ATA_DEBUG + int b, w; + u32 dw; + for (b = 0; b < bytes; ) { + DPRINTK("%02x: ", b); + for (w = 0; b < bytes && w < 4; w++) { + (void) pci_read_config_dword(pdev,b,&dw); + printk("%08x ",dw); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_all_regs(void __iomem *mmio_base, int port, + struct pci_dev *pdev) +{ +#ifdef ATA_DEBUG + void __iomem *hc_base = mv_hc_base(mmio_base, + port >> MV_PORT_HC_SHIFT); + void __iomem *port_base; + int start_port, num_ports, p, start_hc, num_hcs, hc; + + if (0 > port) { + start_hc = start_port = 0; + num_ports = 8; /* shld be benign for 4 port devs */ + num_hcs = 2; + } else { + start_hc = port >> MV_PORT_HC_SHIFT; + start_port = port; + num_ports = num_hcs = 1; + } + DPRINTK("All registers for port(s) %u-%u:\n", start_port, + num_ports > 1 ? num_ports - 1 : start_port); + + if (NULL != pdev) { + DPRINTK("PCI config space regs:\n"); + mv_dump_pci_cfg(pdev, 0x68); + } + DPRINTK("PCI regs:\n"); + mv_dump_mem(mmio_base+0xc00, 0x3c); + mv_dump_mem(mmio_base+0xd00, 0x34); + mv_dump_mem(mmio_base+0xf00, 0x4); + mv_dump_mem(mmio_base+0x1d00, 0x6c); + for (hc = start_hc; hc < start_hc + num_hcs; hc++) { + hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT); + DPRINTK("HC regs (HC %i):\n", hc); + mv_dump_mem(hc_base, 0x1c); + } + for (p = start_port; p < start_port + num_ports; p++) { + port_base = mv_port_base(mmio_base, p); + DPRINTK("EDMA regs (port %i):\n",p); + mv_dump_mem(port_base, 0x54); + DPRINTK("SATA regs (port %i):\n",p); + mv_dump_mem(port_base+0x300, 0x60); + } +#endif } static unsigned int mv_scr_offset(unsigned int sc_reg_in) @@ -389,30 +574,29 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -static int mv_master_reset(void __iomem *mmio_base) +/* This routine only applies to 6xxx parts */ +static int mv_global_soft_reset(void __iomem *mmio_base) { void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; int i, rc = 0; u32 t; - VPRINTK("ENTER\n"); - /* Following procedure defined in PCI "main command and status * register" table. */ t = readl(reg); writel(t | STOP_PCI_MASTER, reg); - for (i = 0; i < 100; i++) { - msleep(10); + for (i = 0; i < 1000; i++) { + udelay(1); t = readl(reg); if (PCI_MASTER_EMPTY & t) { break; } } if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME "PCI master won't flush\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; goto done; } @@ -425,39 +609,311 @@ static int mv_master_reset(void __iomem *mmio_base) } while (!(GLOB_SFT_RST & t) && (i-- > 0)); if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME "can't set global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; goto done; } - /* clear reset */ + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ i = 5; do { - writel(t & ~GLOB_SFT_RST, reg); + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); t = readl(reg); udelay(1); } while ((GLOB_SFT_RST & t) && (i-- > 0)); if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME "can't clear global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; } - - done: - VPRINTK("EXIT, rc = %i\n", rc); +done: return rc; } -static void mv_err_intr(struct ata_port *ap) +static void mv_host_stop(struct ata_host_set *host_set) { - void __iomem *port_mmio; - u32 edma_err_cause, serr = 0; + struct mv_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + if (hpriv->hp_flags & MV_HP_FLAG_MSI) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } + kfree(hpriv); + ata_host_stop(host_set); +} + +static int mv_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp; + void __iomem *port_mmio = mv_ap_base(ap); + void *mem; + dma_addr_t mem_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + return -ENOMEM; + } + memset(pp, 0, sizeof(*pp)); + + mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) { + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, MV_PORT_PRIV_DMA_SZ); + + /* First item in chunk of DMA memory: + * 32-slot command request table (CRQB), 32 bytes each in size + */ + pp->crqb = mem; + pp->crqb_dma = mem_dma; + mem += MV_CRQB_Q_SZ; + mem_dma += MV_CRQB_Q_SZ; + + /* Second item: + * 32-slot command response table (CRPB), 8 bytes each in size + */ + pp->crpb = mem; + pp->crpb_dma = mem_dma; + mem += MV_CRPB_Q_SZ; + mem_dma += MV_CRPB_Q_SZ; + + /* Third item: + * Table of scatter-gather descriptors (ePRD), 16 bytes each + */ + pp->sg_tbl = mem; + pp->sg_tbl_dma = mem_dma; + + writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | + EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); + + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); + writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, + port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + pp->req_producer = pp->rsp_consumer = 0; + + /* Don't turn on EDMA here...do it before DMA commands only. Else + * we'll be unable to send non-data, PIO, etc due to restricted access + * to shadow regs. + */ + ap->private_data = pp; + return 0; +} + +static void mv_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp = ap->private_data; + + mv_stop_dma(ap); + + ap->private_data = NULL; + dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); + kfree(pp); +} + +static void mv_fill_sg(struct ata_queued_cmd *qc) +{ + struct mv_port_priv *pp = qc->ap->private_data; + unsigned int i; + + for (i = 0; i < qc->n_elem; i++) { + u32 sg_len; + dma_addr_t addr; + + addr = sg_dma_address(&qc->sg[i]); + sg_len = sg_dma_len(&qc->sg[i]); + + pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + assert(0 == (sg_len & ~MV_DMA_BOUNDARY)); + pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); + } + if (0 < qc->n_elem) { + pp->sg_tbl[qc->n_elem - 1].flags_size |= EPRD_FLAG_END_OF_TBL; + } +} + +static inline unsigned mv_inc_q_index(unsigned *index) +{ + *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK; + return *index; +} + +static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) +{ + *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | + (last ? CRQB_CMD_LAST : 0); +} + +static void mv_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + u16 *cw; + struct ata_taskfile *tf; + u16 flags = 0; + + if (ATA_PROT_DMA != qc->tf.protocol) { + return; + } - /* bug here b/c we got an err int on a port we don't know about, - * so there's no way to clear it + /* the req producer index should be the same as we remember it */ + assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + + /* Fill in command request block + */ + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + flags |= CRQB_FLAG_READ; + } + assert(MV_MAX_Q_DEPTH > qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + pp->crqb[pp->req_producer].sg_addr = + cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + pp->crqb[pp->req_producer].sg_addr_hi = + cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags); + + cw = &pp->crqb[pp->req_producer].ata_cmd[0]; + tf = &qc->tf; + + /* Sadly, the CRQB cannot accomodate all registers--there are + * only 11 bytes...so we must pick and choose required + * registers based on the command. So, we drop feature and + * hob_feature for [RW] DMA commands, but they are needed for + * NCQ. NCQ will drop hob_nsect. */ - BUG_ON(NULL == ap); - port_mmio = mv_ap_base(ap); + switch (tf->command) { + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); + break; +#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_FPDMA_WRITE: + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); + break; +#endif /* FIXME: remove this line when NCQ added */ + default: + /* The only other commands EDMA supports in non-queued and + * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none + * of which are defined/used by Linux. If we get here, this + * driver needs work. + * + * FIXME: modify libata to give qc_prep a return value and + * return error here. + */ + BUG_ON(tf->command); + break; + } + mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); + mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) { + return; + } + mv_fill_sg(qc); +} + +static int mv_qc_issue(struct ata_queued_cmd *qc) +{ + void __iomem *port_mmio = mv_ap_base(qc->ap); + struct mv_port_priv *pp = qc->ap->private_data; + u32 in_ptr; + + if (ATA_PROT_DMA != qc->tf.protocol) { + /* We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_dma(qc->ap); + return ata_qc_issue_prot(qc); + } + + in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + /* the req producer index should be the same as we remember it */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + /* until we do queuing, the queue should be empty at this point */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + + mv_inc_q_index(&pp->req_producer); /* now incr producer index */ + + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + /* turn on EDMA if not already on */ + mv_start_dma(port_mmio, pp, qc->ap); + } + assert(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + + /* and write the request in pointer to kick the EDMA to life */ + in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; + in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT; + writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + return 0; +} + +static u8 mv_get_crpb_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + u32 out_ptr; + + out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* the response consumer index should be the same as we remember it */ + assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* increment our consumer index... */ + pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); + + /* and, until we do NCQ, there should only be 1 CRPB waiting */ + assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* write out our inc'd consumer index so EDMA knows we're caught up */ + out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; + out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT; + writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* Return ATA status register for completed CRPB */ + return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT); +} + +static void mv_err_intr(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 edma_err_cause, serr = 0; edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -477,8 +933,7 @@ static void mv_err_intr(struct ata_port *ap) } } -/* Handle any outstanding interrupts in a single SATAHC - */ +/* Handle any outstanding interrupts in a single SATAHC */ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, unsigned int hc) { @@ -487,8 +942,8 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, struct ata_port *ap; struct ata_queued_cmd *qc; u32 hc_irq_cause; - int shift, port, port0, hard_port; - u8 ata_status; + int shift, port, port0, hard_port, handled; + u8 ata_status = 0; if (hc == 0) { port0 = 0; @@ -499,7 +954,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, /* we'll need the HC success int register in most cases */ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); if (hc_irq_cause) { - writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); } VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", @@ -508,35 +963,38 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { ap = host_set->ports[port]; hard_port = port & MV_PORT_MASK; /* range 0-3 */ - ata_status = 0xffU; + handled = 0; /* ensure ata_status is set if handled++ */ - if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) { - BUG_ON(NULL == ap); - /* rcv'd new resp, basic DMA complete, or ATA IRQ */ - /* This is needed to clear the ATA INTRQ. - * FIXME: don't read the status reg in EDMA mode! + if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { + /* new CRPB on the queue; just one at a time until NCQ + */ + ata_status = mv_get_crpb_status(ap); + handled++; + } else if ((DEV_IRQ << hard_port) & hc_irq_cause) { + /* received ATA IRQ; read the status reg to clear INTRQ */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr); + handled++; } - shift = port * 2; + shift = port << 1; /* (port * 2) */ if (port >= MV_PORTS_PER_HC) { shift++; /* skip bit 8 in the HC Main IRQ reg */ } if ((PORT0_ERR << shift) & relevant) { mv_err_intr(ap); - /* FIXME: smart to OR in ATA_ERR? */ + /* OR in ATA_ERR to ensure libata knows we took one */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr) | ATA_ERR; + handled++; } - if (ap) { + if (handled && ap) { qc = ata_qc_from_tag(ap, ap->active_tag); if (NULL != qc) { VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); - BUG_ON(0xffU == ata_status); /* mark qc status appropriately */ ata_qc_complete(qc, ata_status); } @@ -550,12 +1008,10 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, { struct ata_host_set *host_set = dev_instance; unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio; + void __iomem *mmio = host_set->mmio_base; u32 irq_stat; - mmio = host_set->mmio_base; irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); /* check the cases where we either have nothing pending or have read * a bogus register value which can indicate HW removal or PCI fault @@ -564,64 +1020,87 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_NONE; } + n_hcs = mv_get_hc_count(host_set->ports[0]->flags); spin_lock(&host_set->lock); for (hc = 0; hc < n_hcs; hc++) { u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); if (relevant) { mv_host_intr(host_set, relevant, hc); - handled = 1; + handled++; } } if (PCI_ERR & irq_stat) { - /* FIXME: these are all masked by default, but still need - * to recover from them properly. - */ - } + printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", + readl(mmio + PCI_IRQ_CAUSE_OFS)); + + VPRINTK("All regs @ PCI error\n"); + mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + handled++; + } spin_unlock(&host_set->lock); return IRQ_RETVAL(handled); } +static u8 mv_check_err(struct ata_port *ap) +{ + mv_stop_dma(ap); /* can't read shadow regs if DMA on */ + return readb((void __iomem *) ap->ioaddr.error_addr); +} + +/* Part of this is taken from __sata_phy_reset and modified to not sleep + * since this routine gets called from interrupt level. + */ static void mv_phy_reset(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; - u32 edma = 0, bdma; + unsigned long timeout; VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - edma = readl(port_mmio + EDMA_CMD_OFS); - if (EDMA_EN & edma) { - /* disable EDMA if active */ - edma &= ~EDMA_EN; - writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS); - udelay(1); - } else if (mv_port_bdma_capable(ap) && - (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) { - /* disable BDMA if active */ - writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS); - } + mv_stop_dma(ap); - writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); udelay(25); /* allow reset propagation */ /* Spec never mentions clearing the bit. Marvell's driver does * clear the bit, however. */ - writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(0, port_mmio + EDMA_CMD_OFS); - VPRINTK("Done. Now calling __sata_phy_reset()\n"); + VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); /* proceed to init communications via the scr_control reg */ - __sata_phy_reset(ap); + scr_write_flush(ap, SCR_CONTROL, 0x301); + mdelay(1); + scr_write_flush(ap, SCR_CONTROL, 0x300); + timeout = jiffies + (HZ * 1); + do { + mdelay(10); + if ((scr_read(ap, SCR_STATUS) & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); - if (ap->flags & ATA_FLAG_PORT_DISABLED) { - VPRINTK("Port disabled pre-sig. Exiting.\n"); + VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); + + if (sata_dev_present(ap)) { + ata_port_probe(ap); + } else { + printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", + ap->id, scr_read(ap, SCR_STATUS)); + ata_port_disable(ap); return; } + ap->cbl = ATA_CBL_SATA; tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); @@ -636,28 +1115,76 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } -static void mv_port_init(struct ata_ioports *port, unsigned long base) +static void mv_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned long flags; + + printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); + DPRINTK("All regs @ start of eng_timeout\n"); + mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, + to_pci_dev(ap->host_set->dev)); + + qc = ata_qc_from_tag(ap, ap->active_tag); + printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", + ap->host_set->mmio_base, ap, qc, qc->scsicmd, + &qc->scsicmd->cmnd); + + mv_err_intr(ap); + mv_phy_reset(ap); + + if (!qc) { + printk(KERN_ERR "ata%u: BUG: timeout without command\n", + ap->id); + } else { + /* hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } +} + +static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) { - /* PIO related setup */ - port->data_addr = base + SHD_PIO_DATA_OFS; - port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS; - port->nsect_addr = base + SHD_SECT_CNT_OFS; - port->lbal_addr = base + SHD_LBA_L_OFS; - port->lbam_addr = base + SHD_LBA_M_OFS; - port->lbah_addr = base + SHD_LBA_H_OFS; - port->device_addr = base + SHD_DEV_HD_OFS; - port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS; - port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS; - /* unused */ + unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; + unsigned serr_ofs; + + /* PIO related setup + */ + port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); + port->error_addr = + port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); + port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); + port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); + port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); + port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); + port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); + port->status_addr = + port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); + /* special case: control/altstatus doesn't have ATA_REG_ address */ + port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; + + /* unused: */ port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; + /* Clear any currently outstanding port interrupt conditions */ + serr_ofs = mv_scr_offset(SCR_ERROR); + writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + /* unmask all EDMA error interrupts */ - writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS); + writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", - readl((void __iomem *)base + EDMA_CFG_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS)); + readl(port_mmio + EDMA_CFG_OFS), + readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), + readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } static int mv_host_init(struct ata_probe_ent *probe_ent) @@ -666,7 +1193,8 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) void __iomem *mmio = probe_ent->mmio_base; void __iomem *port_mmio; - if (mv_master_reset(probe_ent->mmio_base)) { + if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && + mv_global_soft_reset(probe_ent->mmio_base)) { rc = 1; goto done; } @@ -676,17 +1204,27 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) for (port = 0; port < probe_ent->n_ports; port++) { port_mmio = mv_port_base(mmio, port); - mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio); + mv_port_init(&probe_ent->port[port], port_mmio); } for (hc = 0; hc < n_hc; hc++) { - VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc, - readl(mv_hc_base(mmio, hc) + HC_CFG_OFS), - readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS)); + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + + VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " + "(before clear)=0x%08x\n", hc, + readl(hc_mmio + HC_CFG_OFS), + readl(hc_mmio + HC_IRQ_CAUSE_OFS)); + + /* Clear any currently outstanding hc interrupt conditions */ + writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); - writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + + /* and unmask interrupt generation for host regs */ + writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " "PCI int cause/mask=0x%08x/0x%08x\n", @@ -694,11 +1232,37 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) readl(mmio + HC_MAIN_IRQ_MASK_OFS), readl(mmio + PCI_IRQ_CAUSE_OFS), readl(mmio + PCI_IRQ_MASK_OFS)); - - done: +done: return rc; } +/* FIXME: complete this */ +static void mv_print_info(struct ata_probe_ent *probe_ent) +{ + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + struct mv_host_priv *hpriv = probe_ent->private_data; + u8 rev_id, scc; + const char *scc_s; + + /* Use this to determine the HW stepping of the chip so we know + * what errata to workaround + */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); + if (scc == 0) + scc_s = "SCSI"; + else if (scc == 0x01) + scc_s = "RAID"; + else + scc_s = "unknown"; + + printk(KERN_INFO DRV_NAME + "(%s) %u slots %u ports %s mode IRQ via %s\n", + pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); +} + static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; @@ -706,16 +1270,12 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct mv_host_priv *hpriv; unsigned int board_idx = (unsigned int)ent->driver_data; void __iomem *mmio_base; - int pci_dev_busy = 0; - int rc; + int pci_dev_busy = 0, rc; if (!printed_version++) { - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n"); } - VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number, - PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); - rc = pci_enable_device(pdev); if (rc) { return rc; @@ -727,8 +1287,6 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out; } - pci_intx(pdev, 1); - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; @@ -739,8 +1297,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR), - pci_resource_len(pdev, MV_PRIMARY_BAR)); + mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; @@ -769,37 +1326,40 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) { goto err_out_hpriv; } -/* mv_print_info(probe_ent); */ - { - int b, w; - u32 dw[4]; /* hold a line of 16b */ - VPRINTK("PCI config space:\n"); - for (b = 0; b < 0x40; ) { - for (w = 0; w < 4; w++) { - (void) pci_read_config_dword(pdev,b,&dw[w]); - b += sizeof(*dw); - } - VPRINTK("%08x %08x %08x %08x\n", - dw[0],dw[1],dw[2],dw[3]); - } + /* Enable interrupts */ + if (pci_enable_msi(pdev) == 0) { + hpriv->hp_flags |= MV_HP_FLAG_MSI; + } else { + pci_intx(pdev, 1); } - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); + mv_dump_pci_cfg(pdev, 0x68); + mv_print_info(probe_ent); + + if (ata_device_add(probe_ent) == 0) { + rc = -ENODEV; /* No devices discovered */ + goto err_out_dev_add; + } + kfree(probe_ent); return 0; - err_out_hpriv: +err_out_dev_add: + if (MV_HP_FLAG_MSI & hpriv->hp_flags) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } +err_out_hpriv: kfree(hpriv); - err_out_iounmap: - iounmap(mmio_base); - err_out_free_ent: +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_free_ent: kfree(probe_ent); - err_out_regions: +err_out_regions: pci_release_regions(pdev); - err_out: +err_out: if (!pci_dev_busy) { pci_disable_device(pdev); } -- GitLab From fe998aa7e27f125f6768ec6b137b0ce2c9790509 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Oct 2005 11:54:29 +0900 Subject: [PATCH 0174/1519] [PATCH] libata: add ATA exceptions chapter to doc Hello, Jeff. This patch adds ATA errors & exceptions chapter to Documentation/DocBook/libata.tmpl. As suggested, the chapter is placed before low level driver specific chapters. Contents are unchanged from the last posting. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- Documentation/DocBook/libata.tmpl | 716 ++++++++++++++++++++++++++++++ 1 file changed, 716 insertions(+) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index b2ec780bcda1..d260d92089ad 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -787,6 +787,722 @@ and other resources, etc. !Idrivers/scsi/libata-scsi.c + + ATA errors & exceptions + + + This chapter tries to identify what error/exception conditions exist + for ATA/ATAPI devices and describe how they should be handled in + implementation-neutral way. + + + + The term 'error' is used to describe conditions where either an + explicit error condition is reported from device or a command has + timed out. + + + + The term 'exception' is either used to describe exceptional + conditions which are not errors (say, power or hotplug events), or + to describe both errors and non-error exceptional conditions. Where + explicit distinction between error and exception is necessary, the + term 'non-error exception' is used. + + + + Exception categories + + Exceptions are described primarily with respect to legacy + taskfile + bus master IDE interface. If a controller provides + other better mechanism for error reporting, mapping those into + categories described below shouldn't be difficult. + + + + In the following sections, two recovery actions - reset and + reconfiguring transport - are mentioned. These are described + further in . + + + + HSM violation + + This error is indicated when STATUS value doesn't match HSM + requirement during issuing or excution any ATA/ATAPI command. + + + + Examples + + + + ATA_STATUS doesn't contain !BSY && DRDY && !DRQ while trying + to issue a command. + + + + + + !BSY && !DRQ during PIO data transfer. + + + + + + DRQ on command completion. + + + + + + !BSY && ERR after CDB tranfer starts but before the + last byte of CDB is transferred. ATA/ATAPI standard states + that "The device shall not terminate the PACKET command + with an error before the last byte of the command packet has + been written" in the error outputs description of PACKET + command and the state diagram doesn't include such + transitions. + + + + + + + In these cases, HSM is violated and not much information + regarding the error can be acquired from STATUS or ERROR + register. IOW, this error can be anything - driver bug, + faulty device, controller and/or cable. + + + + As HSM is violated, reset is necessary to restore known state. + Reconfiguring transport for lower speed might be helpful too + as transmission errors sometimes cause this kind of errors. + + + + + ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION) + + + These are errors detected and reported by ATA/ATAPI devices + indicating device problems. For this type of errors, STATUS + and ERROR register values are valid and describe error + condition. Note that some of ATA bus errors are detected by + ATA/ATAPI devices and reported using the same mechanism as + device errors. Those cases are described later in this + section. + + + + For ATA commands, this type of errors are indicated by !BSY + && ERR during command execution and on completion. + + + For ATAPI commands, + + + + + + !BSY && ERR && ABRT right after issuing PACKET + indicates that PACKET command is not supported and falls in + this category. + + + + + + !BSY && ERR(==CHK) && !ABRT after the last + byte of CDB is transferred indicates CHECK CONDITION and + doesn't fall in this category. + + + + + + !BSY && ERR(==CHK) && ABRT after the last byte + of CDB is transferred *probably* indicates CHECK CONDITION and + doesn't fall in this category. + + + + + + + Of errors detected as above, the followings are not ATA/ATAPI + device errors but ATA bus errors and should be handled + according to . + + + + + + CRC error during data transfer + + + This is indicated by ICRC bit in the ERROR register and + means that corruption occurred during data transfer. Upto + ATA/ATAPI-7, the standard specifies that this bit is only + applicable to UDMA transfers but ATA/ATAPI-8 draft revision + 1f says that the bit may be applicable to multiword DMA and + PIO. + + + + + + ABRT error during data transfer or on completion + + + Upto ATA/ATAPI-7, the standard specifies that ABRT could be + set on ICRC errors and on cases where a device is not able + to complete a command. Combined with the fact that MWDMA + and PIO transfer errors aren't allowed to use ICRC bit upto + ATA/ATAPI-7, it seems to imply that ABRT bit alone could + indicate tranfer errors. + + + However, ATA/ATAPI-8 draft revision 1f removes the part + that ICRC errors can turn on ABRT. So, this is kind of + gray area. Some heuristics are needed here. + + + + + + + + ATA/ATAPI device errors can be further categorized as follows. + + + + + + Media errors + + + This is indicated by UNC bit in the ERROR register. ATA + devices reports UNC error only after certain number of + retries cannot recover the data, so there's nothing much + else to do other than notifying upper layer. + + + READ and WRITE commands report CHS or LBA of the first + failed sector but ATA/ATAPI standard specifies that the + amount of transferred data on error completion is + indeterminate, so we cannot assume that sectors preceding + the failed sector have been transferred and thus cannot + complete those sectors successfully as SCSI does. + + + + + + Media changed / media change requested error + + + <<TODO: fill here>> + + + + + Address error + + + This is indicated by IDNF bit in the ERROR register. + Report to upper layer. + + + + + Other errors + + + This can be invalid command or parameter indicated by ABRT + ERROR bit or some other error condition. Note that ABRT + bit can indicate a lot of things including ICRC and Address + errors. Heuristics needed. + + + + + + + + Depending on commands, not all STATUS/ERROR bits are + applicable. These non-applicable bits are marked with + "na" in the output descriptions but upto ATA/ATAPI-7 + no definition of "na" can be found. However, + ATA/ATAPI-8 draft revision 1f describes "N/A" as + follows. + + +
+ + 3.2.3.3a N/A + + + A keyword the indicates a field has no defined value in + this standard and should not be checked by the host or + device. N/A fields should be cleared to zero. + + + + +
+ + + So, it seems reasonable to assume that "na" bits are + cleared to zero by devices and thus need no explicit masking. + + + + + + ATAPI device CHECK CONDITION + + + ATAPI device CHECK CONDITION error is indicated by set CHK bit + (ERR bit) in the STATUS register after the last byte of CDB is + transferred for a PACKET command. For this kind of errors, + sense data should be acquired to gather information regarding + the errors. REQUEST SENSE packet command should be used to + acquire sense data. + + + + Once sense data is acquired, this type of errors can be + handled similary to other SCSI errors. Note that sense data + may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR + && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such + cases, the error should be considered as an ATA bus error and + handled according to . + + + + + + ATA device error (NCQ) + + + NCQ command error is indicated by cleared BSY and set ERR bit + during NCQ command phase (one or more NCQ commands + outstanding). Although STATUS and ERROR registers will + contain valid values describing the error, READ LOG EXT is + required to clear the error condition, determine which command + has failed and acquire more information. + + + + READ LOG EXT Log Page 10h reports which tag has failed and + taskfile register values describing the error. With this + information the failed command can be handled as a normal ATA + command error as in and all + other in-flight commands must be retried. Note that this + retry should not be counted - it's likely that commands + retried this way would have completed normally if it were not + for the failed command. + + + + Note that ATA bus errors can be reported as ATA device NCQ + errors. This should be handled as described in . + + + + If READ LOG EXT Log Page 10h fails or reports NQ, we're + thoroughly screwed. This condition should be treated + according to . + + + + + + ATA bus error + + + ATA bus error means that data corruption occurred during + transmission over ATA bus (SATA or PATA). This type of errors + can be indicated by + + + + + + + ICRC or ABRT error as described in . + + + + + + Controller-specific error completion with error information + indicating transmission error. + + + + + + On some controllers, command timeout. In this case, there may + be a mechanism to determine that the timeout is due to + transmission error. + + + + + + Unknown/random errors, timeouts and all sorts of weirdities. + + + + + + + As described above, transmission errors can cause wide variety + of symptoms ranging from device ICRC error to random device + lockup, and, for many cases, there is no way to tell if an + error condition is due to transmission error or not; + therefore, it's necessary to employ some kind of heuristic + when dealing with errors and timeouts. For example, + encountering repetitive ABRT errors for known supported + command is likely to indicate ATA bus error. + + + + Once it's determined that ATA bus errors have possibly + occurred, lowering ATA bus transmission speed is one of + actions which may alleviate the problem. See for more information. + + + + + + PCI bus error + + + Data corruption or other failures during transmission over PCI + (or other system bus). For standard BMDMA, this is indicated + by Error bit in the BMDMA Status register. This type of + errors must be logged as it indicates something is very wrong + with the system. Resetting host controller is recommended. + + + + + + Late completion + + + This occurs when timeout occurs and the timeout handler finds + out that the timed out command has completed successfully or + with error. This is usually caused by lost interrupts. This + type of errors must be logged. Resetting host controller is + recommended. + + + + + + Unknown error (timeout) + + + This is when timeout occurs and the command is still + processing or the host and device are in unknown state. When + this occurs, HSM could be in any valid or invalid state. To + bring the device to known state and make it forget about the + timed out command, resetting is necessary. The timed out + command may be retried. + + + + Timeouts can also be caused by transmission errors. Refer to + for more details. + + + + + + Hotplug and power management exceptions + + + <<TODO: fill here>> + + + + + + + + EH recovery actions + + + This section discusses several important recovery actions. + + + + Clearing error condition + + + Many controllers require its error registers to be cleared by + error handler. Different controllers may have different + requirements. + + + + For SATA, it's strongly recommended to clear at least SError + register during error handling. + + + + + Reset + + + During EH, resetting is necessary in the following cases. + + + + + + + HSM is in unknown or invalid state + + + + + + HBA is in unknown or invalid state + + + + + + EH needs to make HBA/device forget about in-flight commands + + + + + + HBA/device behaves weirdly + + + + + + + Resetting during EH might be a good idea regardless of error + condition to improve EH robustness. Whether to reset both or + either one of HBA and device depends on situation but the + following scheme is recommended. + + + + + + + When it's known that HBA is in ready state but ATA/ATAPI + device in in unknown state, reset only device. + + + + + + If HBA is in unknown state, reset both HBA and device. + + + + + + + HBA resetting is implementation specific. For a controller + complying to taskfile/BMDMA PCI IDE, stopping active DMA + transaction may be sufficient iff BMDMA state is the only HBA + context. But even mostly taskfile/BMDMA PCI IDE complying + controllers may have implementation specific requirements and + mechanism to reset themselves. This must be addressed by + specific drivers. + + + + OTOH, ATA/ATAPI standard describes in detail ways to reset + ATA/ATAPI devices. + + + + + PATA hardware reset + + + This is hardware initiated device reset signalled with + asserted PATA RESET- signal. There is no standard way to + initiate hardware reset from software although some + hardware provides registers that allow driver to directly + tweak the RESET- signal. + + + + + Software reset + + + This is achieved by turning CONTROL SRST bit on for at + least 5us. Both PATA and SATA support it but, in case of + SATA, this may require controller-specific support as the + second Register FIS to clear SRST should be transmitted + while BSY bit is still set. Note that on PATA, this resets + both master and slave devices on a channel. + + + + + EXECUTE DEVICE DIAGNOSTIC command + + + Although ATA/ATAPI standard doesn't describe exactly, EDD + implies some level of resetting, possibly similar level + with software reset. Host-side EDD protocol can be handled + with normal command processing and most SATA controllers + should be able to handle EDD's just like other commands. + As in software reset, EDD affects both devices on a PATA + bus. + + + Although EDD does reset devices, this doesn't suit error + handling as EDD cannot be issued while BSY is set and it's + unclear how it will act when device is in unknown/weird + state. + + + + + ATAPI DEVICE RESET command + + + This is very similar to software reset except that reset + can be restricted to the selected device without affecting + the other device sharing the cable. + + + + + SATA phy reset + + + This is the preferred way of resetting a SATA device. In + effect, it's identical to PATA hardware reset. Note that + this can be done with the standard SCR Control register. + As such, it's usually easier to implement than software + reset. + + + + + + + + One more thing to consider when resetting devices is that + resetting clears certain configuration parameters and they + need to be set to their previous or newly adjusted values + after reset. + + + + Parameters affected are. + + + + + + + CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used) + + + + + + Parameters set with SET FEATURES including transfer mode setting + + + + + + Block count set with SET MULTIPLE MODE + + + + + + Other parameters (SET MAX, MEDIA LOCK...) + + + + + + + ATA/ATAPI standard specifies that some parameters must be + maintained across hardware or software reset, but doesn't + strictly specify all of them. Always reconfiguring needed + parameters after reset is required for robustness. Note that + this also applies when resuming from deep sleep (power-off). + + + + Also, ATA/ATAPI standard requires that IDENTIFY DEVICE / + IDENTIFY PACKET DEVICE is issued after any configuration + parameter is updated or a hardware reset and the result used + for further operation. OS driver is required to implement + revalidation mechanism to support this. + + + + + + Reconfigure transport + + + For both PATA and SATA, a lot of corners are cut for cheap + connectors, cables or controllers and it's quite common to see + high transmission error rate. This can be mitigated by + lowering transmission speed. + + + + The following is a possible scheme Jeff Garzik suggested. + + +
+ + If more than $N (3?) transmission errors happen in 15 minutes, + + + + + if SATA, decrease SATA PHY speed. if speed cannot be decreased, + + + + + decrease UDMA xfer speed. if at UDMA0, switch to PIO4, + + + + + decrease PIO xfer speed. if at PIO3, complain, but continue + + + +
+ + + + + + + ata_piix Internals !Idrivers/scsi/ata_piix.c -- GitLab From cc6e7c44f4b8ab13acf5521cd4b312848122179f Mon Sep 17 00:00:00 2001 From: Ravinandan Arakali Date: Tue, 4 Oct 2005 06:41:24 -0400 Subject: [PATCH 0175/1519] [PATCH] S2io: MSI/MSI-X support (runtime configurable) This patch adds support for MSI/MSI-X feature to the driver. It is a runtime parameter(for now, loadable parameter). Default is INTA. Patch has been tested on IA64 platform with Xframe II adapter, both of which support MSI-X feature. An improvement of about 7% in throughput(both Tx and Rx) was observed and a reduction by 7% in CPU utilization during Tx test. Signed-off-by: Ravinandan Arakali Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 543 ++++++++++++++++++++++++++++++++++++++++++--- drivers/net/s2io.h | 50 ++++- 2 files changed, 556 insertions(+), 37 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index dd451e099a4c..4b9f1828845e 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -67,7 +67,7 @@ /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.8.1"; +static char s2io_driver_version[] = "Version 2.0.9.1"; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -307,6 +307,8 @@ static unsigned int indicate_max_pkts; #endif /* Frequency of Rx desc syncs expressed as power of 2 */ static unsigned int rxsync_frequency = 3; +/* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */ +static unsigned int intr_type = 0; /* * S2IO device table. @@ -1396,8 +1398,13 @@ static int init_nic(struct s2io_nic *nic) writeq(val64, &bar0->rti_data1_mem); val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | - RTI_DATA2_MEM_RX_UFC_B(0x2) | - RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80); + RTI_DATA2_MEM_RX_UFC_B(0x2) ; + if (nic->intr_type == MSI_X) + val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \ + RTI_DATA2_MEM_RX_UFC_D(0x40)); + else + val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \ + RTI_DATA2_MEM_RX_UFC_D(0x80)); writeq(val64, &bar0->rti_data2_mem); for (i = 0; i < config->rx_ring_num; i++) { @@ -1507,17 +1514,15 @@ static int init_nic(struct s2io_nic *nic) #define LINK_UP_DOWN_INTERRUPT 1 #define MAC_RMAC_ERR_TIMER 2 -#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE) -#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER -#else int s2io_link_fault_indication(nic_t *nic) { + if (nic->intr_type != INTA) + return MAC_RMAC_ERR_TIMER; if (nic->device_type == XFRAME_II_DEVICE) return LINK_UP_DOWN_INTERRUPT; else return MAC_RMAC_ERR_TIMER; } -#endif /** * en_dis_able_nic_intrs - Enable or Disable the interrupts @@ -1941,11 +1946,14 @@ static int start_nic(struct s2io_nic *nic) } /* Enable select interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; - interruptible |= TX_PIC_INTR | RX_PIC_INTR; - interruptible |= TX_MAC_INTR | RX_MAC_INTR; - - en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); + if (nic->intr_type != INTA) + en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS); + else { + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; + en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); + } /* * With some switches, link might be already up at this point. @@ -2633,11 +2641,11 @@ static void tx_intr_handler(fifo_info_t *fifo_data) err = txdlp->Control_1 & TXD_T_CODE; if ((err >> 48) == 0xA) { DBG_PRINT(TX_DBG, "TxD returned due \ - to loss of link\n"); +to loss of link\n"); } else { DBG_PRINT(ERR_DBG, "***TxD error \ - %llx\n", err); +%llx\n", err); } } @@ -2854,6 +2862,9 @@ void s2io_reset(nic_t * sp) /* Set swapper to enable I/O register access */ s2io_set_swapper(sp); + /* Restore the MSIX table entries from local variables */ + restore_xmsi_data(sp); + /* Clear certain PCI/PCI-X fields after reset */ if (sp->device_type == XFRAME_II_DEVICE) { /* Clear parity err detect bit */ @@ -2983,8 +2994,9 @@ int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_RXD_W_FE | SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | - SWAPPER_CTRL_XMSI_SE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); + if (nic->intr_type == INTA) + val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #else /* @@ -3005,8 +3017,9 @@ int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_RXD_W_SE | SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | - SWAPPER_CTRL_XMSI_SE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); + if (sp->intr_type == INTA) + val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #endif val64 = readq(&bar0->swapper_ctrl); @@ -3028,6 +3041,201 @@ int s2io_set_swapper(nic_t * sp) return SUCCESS; } +int wait_for_msix_trans(nic_t *nic, int i) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64; + int ret = 0, cnt = 0; + + do { + val64 = readq(&bar0->xmsi_access); + if (!(val64 & BIT(15))) + break; + mdelay(1); + cnt++; + } while(cnt < 5); + if (cnt == 5) { + DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i); + ret = 1; + } + + return ret; +} + +void restore_xmsi_data(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64; + int i; + + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + writeq(nic->msix_info[i].addr, &bar0->xmsi_address); + writeq(nic->msix_info[i].data, &bar0->xmsi_data); + val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6)); + writeq(val64, &bar0->xmsi_access); + if (wait_for_msix_trans(nic, i)) { + DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); + continue; + } + } +} + +void store_xmsi_data(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64, addr, data; + int i; + + /* Store and display */ + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + val64 = (BIT(15) | vBIT(i, 26, 6)); + writeq(val64, &bar0->xmsi_access); + if (wait_for_msix_trans(nic, i)) { + DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); + continue; + } + addr = readq(&bar0->xmsi_address); + data = readq(&bar0->xmsi_data); + if (addr && data) { + nic->msix_info[i].addr = addr; + nic->msix_info[i].data = data; + } + } +} + +int s2io_enable_msi(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u16 msi_ctrl, msg_val; + struct config_param *config = &nic->config; + struct net_device *dev = nic->dev; + u64 val64, tx_mat, rx_mat; + int i, err; + + val64 = readq(&bar0->pic_control); + val64 &= ~BIT(1); + writeq(val64, &bar0->pic_control); + + err = pci_enable_msi(nic->pdev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: enabling MSI failed\n", + nic->dev->name); + return err; + } + + /* + * Enable MSI and use MSI-1 in stead of the standard MSI-0 + * for interrupt handling. + */ + pci_read_config_word(nic->pdev, 0x4c, &msg_val); + msg_val ^= 0x1; + pci_write_config_word(nic->pdev, 0x4c, msg_val); + pci_read_config_word(nic->pdev, 0x4c, &msg_val); + + pci_read_config_word(nic->pdev, 0x42, &msi_ctrl); + msi_ctrl |= 0x10; + pci_write_config_word(nic->pdev, 0x42, msi_ctrl); + + /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */ + tx_mat = readq(&bar0->tx_mat0_n[0]); + for (i=0; itx_fifo_num; i++) { + tx_mat |= TX_MAT_SET(i, 1); + } + writeq(tx_mat, &bar0->tx_mat0_n[0]); + + rx_mat = readq(&bar0->rx_mat); + for (i=0; irx_ring_num; i++) { + rx_mat |= RX_MAT_SET(i, 1); + } + writeq(rx_mat, &bar0->rx_mat); + + dev->irq = nic->pdev->irq; + return 0; +} + +int s2io_enable_msi_x(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 tx_mat, rx_mat; + u16 msi_control; /* Temp variable */ + int ret, i, j, msix_indx = 1; + + nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry), + GFP_KERNEL); + if (nic->entries == NULL) { + DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__); + return -ENOMEM; + } + memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + + nic->s2io_entries = + kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry), + GFP_KERNEL); + if (nic->s2io_entries == NULL) { + DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__); + kfree(nic->entries); + return -ENOMEM; + } + memset(nic->s2io_entries, 0, + MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + + for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + nic->entries[i].entry = i; + nic->s2io_entries[i].entry = i; + nic->s2io_entries[i].arg = NULL; + nic->s2io_entries[i].in_use = 0; + } + + tx_mat = readq(&bar0->tx_mat0_n[0]); + for (i=0; iconfig.tx_fifo_num; i++, msix_indx++) { + tx_mat |= TX_MAT_SET(i, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i]; + nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(tx_mat, &bar0->tx_mat0_n[0]); + + if (!nic->config.bimodal) { + rx_mat = readq(&bar0->rx_mat); + for (j=0; jconfig.rx_ring_num; j++, msix_indx++) { + rx_mat |= RX_MAT_SET(j, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j]; + nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(rx_mat, &bar0->rx_mat); + } else { + tx_mat = readq(&bar0->tx_mat0_n[7]); + for (j=0; jconfig.rx_ring_num; j++, msix_indx++) { + tx_mat |= TX_MAT_SET(i, msix_indx); + nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j]; + nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE; + nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + } + writeq(tx_mat, &bar0->tx_mat0_n[7]); + } + + ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X); + if (ret) { + DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name); + kfree(nic->entries); + kfree(nic->s2io_entries); + nic->entries = NULL; + nic->s2io_entries = NULL; + return -ENOMEM; + } + + /* + * To enable MSI-X, MSI also needs to be enabled, due to a bug + * in the herc NIC. (Temp change, needs to be removed later) + */ + pci_read_config_word(nic->pdev, 0x42, &msi_control); + msi_control |= 0x1; /* Enable MSI */ + pci_write_config_word(nic->pdev, 0x42, msi_control); + + return 0; +} + /* ********************************************************* * * Functions defined below concern the OS part of the driver * * ********************************************************* */ @@ -3048,6 +3256,8 @@ int s2io_open(struct net_device *dev) { nic_t *sp = dev->priv; int err = 0; + int i; + u16 msi_control; /* Temp variable */ /* * Make sure you have link off by default every time @@ -3064,13 +3274,55 @@ int s2io_open(struct net_device *dev) goto hw_init_failed; } + /* Store the values of the MSIX table in the nic_t structure */ + store_xmsi_data(sp); + /* After proper initialization of H/W, register ISR */ - err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ, - sp->name, dev); - if (err) { - DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", - dev->name); - goto isr_registration_failed; + if (sp->intr_type == MSI) { + err = request_irq((int) sp->pdev->irq, s2io_msi_handle, + SA_SHIRQ, sp->name, dev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: MSI registration \ +failed\n", dev->name); + goto isr_registration_failed; + } + } + if (sp->intr_type == MSI_X) { + for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { + if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { + sprintf(sp->desc1, "%s:MSI-X-%d-TX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_fifo_handle, 0, sp->desc1, + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, + sp->msix_info[i].addr); + } else { + sprintf(sp->desc2, "%s:MSI-X-%d-RX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_ring_handle, 0, sp->desc2, + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, + sp->msix_info[i].addr); + } + if (err) { + DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \ +failed\n", dev->name, i); + DBG_PRINT(ERR_DBG, "Returned: %d\n", err); + goto isr_registration_failed; + } + sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; + } + } + if (sp->intr_type == INTA) { + err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ, + sp->name, dev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", + dev->name); + goto isr_registration_failed; + } } if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) { @@ -3083,11 +3335,37 @@ int s2io_open(struct net_device *dev) return 0; setting_mac_address_failed: - free_irq(sp->pdev->irq, dev); + if (sp->intr_type != MSI_X) + free_irq(sp->pdev->irq, dev); isr_registration_failed: del_timer_sync(&sp->alarm_timer); + if (sp->intr_type == MSI_X) { + if (sp->device_type == XFRAME_II_DEVICE) { + for (i=1; (sp->s2io_entries[i].in_use == + MSIX_REGISTERED_SUCCESS); i++) { + int vector = sp->entries[i].vector; + void *arg = sp->s2io_entries[i].arg; + + free_irq(vector, arg); + } + pci_disable_msix(sp->pdev); + + /* Temp */ + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + } + } + else if (sp->intr_type == MSI) + pci_disable_msi(sp->pdev); s2io_reset(sp); hw_init_failed: + if (sp->intr_type == MSI_X) { + if (sp->entries) + kfree(sp->entries); + if (sp->s2io_entries) + kfree(sp->s2io_entries); + } return err; } @@ -3107,12 +3385,35 @@ int s2io_open(struct net_device *dev) int s2io_close(struct net_device *dev) { nic_t *sp = dev->priv; + int i; + u16 msi_control; + flush_scheduled_work(); netif_stop_queue(dev); /* Reset card, kill tasklet and free Tx and Rx buffers. */ s2io_card_down(sp); - free_irq(sp->pdev->irq, dev); + if (sp->intr_type == MSI_X) { + if (sp->device_type == XFRAME_II_DEVICE) { + for (i=1; (sp->s2io_entries[i].in_use == + MSIX_REGISTERED_SUCCESS); i++) { + int vector = sp->entries[i].vector; + void *arg = sp->s2io_entries[i].arg; + + free_irq(vector, arg); + } + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + + pci_disable_msix(sp->pdev); + } + } + else { + free_irq(sp->pdev->irq, dev); + if (sp->intr_type == MSI) + pci_disable_msi(sp->pdev); + } sp->device_close_flag = TRUE; /* Device is shut down. */ return 0; } @@ -3278,6 +3579,104 @@ s2io_alarm_handle(unsigned long data) mod_timer(&sp->alarm_timer, jiffies + HZ / 2); } +static irqreturn_t +s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + nic_t *sp = dev->priv; + int i; + int ret; + mac_info_t *mac_control; + struct config_param *config; + + atomic_inc(&sp->isr_cnt); + mac_control = &sp->mac_control; + config = &sp->config; + DBG_PRINT(INTR_DBG, "%s: MSI handler\n", __FUNCTION__); + + /* If Intr is because of Rx Traffic */ + for (i = 0; i < config->rx_ring_num; i++) + rx_intr_handler(&mac_control->rings[i]); + + /* If Intr is because of Tx Traffic */ + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&mac_control->fifos[i]); + + /* + * If the Rx buffer count is below the panic threshold then + * reallocate the buffers from the interrupt handler itself, + * else schedule a tasklet to reallocate the buffers. + */ + for (i = 0; i < config->rx_ring_num; i++) { + int rxb_size = atomic_read(&sp->rx_bufs_left[i]); + int level = rx_buffer_level(sp, rxb_size, i); + + if ((level == PANIC) && (!TASKLET_IN_USE)) { + DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name); + DBG_PRINT(INTR_DBG, "PANIC levels\n"); + if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) { + DBG_PRINT(ERR_DBG, "%s:Out of memory", + dev->name); + DBG_PRINT(ERR_DBG, " in ISR!!\n"); + clear_bit(0, (&sp->tasklet_status)); + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; + } + clear_bit(0, (&sp->tasklet_status)); + } else if (level == LOW) { + tasklet_schedule(&sp->task); + } + } + + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; +} + +static irqreturn_t +s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + ring_info_t *ring = (ring_info_t *)dev_id; + nic_t *sp = ring->nic; + int rxb_size, level, rng_n; + + atomic_inc(&sp->isr_cnt); + rx_intr_handler(ring); + + rng_n = ring->ring_no; + rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]); + level = rx_buffer_level(sp, rxb_size, rng_n); + + if ((level == PANIC) && (!TASKLET_IN_USE)) { + int ret; + DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__); + DBG_PRINT(INTR_DBG, "PANIC levels\n"); + if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) { + DBG_PRINT(ERR_DBG, "Out of memory in %s", + __FUNCTION__); + clear_bit(0, (&sp->tasklet_status)); + return IRQ_HANDLED; + } + clear_bit(0, (&sp->tasklet_status)); + } else if (level == LOW) { + tasklet_schedule(&sp->task); + } + atomic_dec(&sp->isr_cnt); + + return IRQ_HANDLED; +} + +static irqreturn_t +s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs) +{ + fifo_info_t *fifo = (fifo_info_t *)dev_id; + nic_t *sp = fifo->nic; + + atomic_inc(&sp->isr_cnt); + tx_intr_handler(fifo); + atomic_dec(&sp->isr_cnt); + return IRQ_HANDLED; +} + static void s2io_txpic_intr_handle(nic_t *sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; @@ -4932,7 +5331,7 @@ static void s2io_card_down(nic_t * sp) static int s2io_card_up(nic_t * sp) { - int i, ret; + int i, ret = 0; mac_info_t *mac_control; struct config_param *config; struct net_device *dev = (struct net_device *) sp->dev; @@ -4944,6 +5343,15 @@ static int s2io_card_up(nic_t * sp) return -ENODEV; } + if (sp->intr_type == MSI) + ret = s2io_enable_msi(sp); + else if (sp->intr_type == MSI_X) + ret = s2io_enable_msi_x(sp); + if (ret) { + DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); + sp->intr_type = INTA; + } + /* * Initializing the Rx buffers. For now we are considering only 1 * Rx ring and initializing buffers into 30 Rx blocks @@ -5245,6 +5653,7 @@ module_param(bimodal, bool, 0); module_param(indicate_max_pkts, int, 0); #endif module_param(rxsync_frequency, int, 0); +module_param(intr_type, int, 0); /** * s2io_init_nic - Initialization of the adapter . @@ -5274,9 +5683,16 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) mac_info_t *mac_control; struct config_param *config; int mode; + u8 dev_intr_type = intr_type; #ifdef CONFIG_S2IO_NAPI - DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); + if (dev_intr_type != INTA) { + DBG_PRINT(ERR_DBG, "NAPI cannot be enabled when MSI/MSI-X \ +is enabled. Defaulting to INTA\n"); + dev_intr_type = INTA; + } + else + DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); #endif if ((ret = pci_enable_device(pdev))) { @@ -5303,10 +5719,35 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) return -ENOMEM; } - if (pci_request_regions(pdev, s2io_driver_name)) { - DBG_PRINT(ERR_DBG, "Request Regions failed\n"), - pci_disable_device(pdev); - return -ENODEV; + if ((dev_intr_type == MSI_X) && + ((pdev->device != PCI_DEVICE_ID_HERC_WIN) && + (pdev->device != PCI_DEVICE_ID_HERC_UNI))) { + DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. \ +Defaulting to INTA\n"); + dev_intr_type = INTA; + } + if (dev_intr_type != MSI_X) { + if (pci_request_regions(pdev, s2io_driver_name)) { + DBG_PRINT(ERR_DBG, "Request Regions failed\n"), + pci_disable_device(pdev); + return -ENODEV; + } + } + else { + if (!(request_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0), s2io_driver_name))) { + DBG_PRINT(ERR_DBG, "bar0 Request Regions failed\n"); + pci_disable_device(pdev); + return -ENODEV; + } + if (!(request_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2), s2io_driver_name))) { + DBG_PRINT(ERR_DBG, "bar1 Request Regions failed\n"); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + pci_disable_device(pdev); + return -ENODEV; + } } dev = alloc_etherdev(sizeof(nic_t)); @@ -5329,6 +5770,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->pdev = pdev; sp->high_dma_flag = dma_flag; sp->device_enabled_once = FALSE; + sp->intr_type = dev_intr_type; if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || (pdev->device == PCI_DEVICE_ID_HERC_UNI)) @@ -5336,6 +5778,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) else sp->device_type = XFRAME_I_DEVICE; + /* Initialize some PCI/PCI-X fields of the NIC. */ s2io_init_pci(sp); @@ -5577,6 +6020,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) #ifdef CONFIG_2BUFF_MODE DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); #endif + switch(sp->intr_type) { + case INTA: + DBG_PRINT(ERR_DBG, ", Intr type INTA"); + break; + case MSI: + DBG_PRINT(ERR_DBG, ", Intr type MSI"); + break; + case MSI_X: + DBG_PRINT(ERR_DBG, ", Intr type MSI-X"); + break; + } DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", @@ -5601,6 +6055,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) #ifdef CONFIG_2BUFF_MODE DBG_PRINT(ERR_DBG, ", Buffer mode %d",2); #endif + switch(sp->intr_type) { + case INTA: + DBG_PRINT(ERR_DBG, ", Intr type INTA"); + break; + case MSI: + DBG_PRINT(ERR_DBG, ", Intr type MSI"); + break; + case MSI_X: + DBG_PRINT(ERR_DBG, ", Intr type MSI-X"); + break; + } DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n"); DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", sp->def_mac_addr[0].mac_addr[0], @@ -5644,7 +6109,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) mem_alloc_failed: free_shared_mem(sp); pci_disable_device(pdev); - pci_release_regions(pdev); + if (dev_intr_type != MSI_X) + pci_release_regions(pdev); + else { + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + release_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + } pci_set_drvdata(pdev, NULL); free_netdev(dev); @@ -5678,7 +6150,14 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev) iounmap(sp->bar0); iounmap(sp->bar1); pci_disable_device(pdev); - pci_release_regions(pdev); + if (sp->intr_type != MSI_X) + pci_release_regions(pdev); + else { + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + release_mem_region(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + } pci_set_drvdata(pdev, NULL); free_netdev(dev); } diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 89151cb52181..1cc24b56760e 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -652,6 +652,30 @@ typedef struct { #define SMALL_BLK_CNT 30 #define LARGE_BLK_CNT 100 +/* + * Structure to keep track of the MSI-X vectors and the corresponding + * argument registered against each vector + */ +#define MAX_REQUESTED_MSI_X 17 +struct s2io_msix_entry +{ + u16 vector; + u16 entry; + void *arg; + + u8 type; +#define MSIX_FIFO_TYPE 1 +#define MSIX_RING_TYPE 2 + + u8 in_use; +#define MSIX_REGISTERED_SUCCESS 0xAA +}; + +struct msix_info_st { + u64 addr; + u64 data; +}; + /* Structure representing one instance of the NIC */ struct s2io_nic { #ifdef CONFIG_S2IO_NAPI @@ -719,13 +743,8 @@ struct s2io_nic { * a schedule task that will set the correct Link state once the * NIC's PHY has stabilized after a state change. */ -#ifdef INIT_TQUEUE - struct tq_struct rst_timer_task; - struct tq_struct set_link_task; -#else struct work_struct rst_timer_task; struct work_struct set_link_task; -#endif /* Flag that can be used to turn on or turn off the Rx checksum * offload feature. @@ -748,10 +767,23 @@ struct s2io_nic { atomic_t card_state; volatile unsigned long link_state; struct vlan_group *vlgrp; +#define MSIX_FLG 0xA5 + struct msix_entry *entries; + struct s2io_msix_entry *s2io_entries; + char desc1[35]; + char desc2[35]; + + struct msix_info_st msix_info[0x3f]; + #define XFRAME_I_DEVICE 1 #define XFRAME_II_DEVICE 2 u8 device_type; +#define INTA 0 +#define MSI 1 +#define MSI_X 2 + u8 intr_type; + spinlock_t rx_lock; atomic_t isr_cnt; }; @@ -886,6 +918,13 @@ static int s2io_poll(struct net_device *dev, int *budget); static void s2io_init_pci(nic_t * sp); int s2io_set_mac_addr(struct net_device *dev, u8 * addr); static void s2io_alarm_handle(unsigned long data); +static int s2io_enable_msi(nic_t *nic); +static irqreturn_t s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t +s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t +s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs); +int s2io_enable_msi_x(nic_t *nic); static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs); static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag); static struct ethtool_ops netdev_ethtool_ops; @@ -894,4 +933,5 @@ int s2io_set_swapper(nic_t * sp); static void s2io_card_down(nic_t *nic); static int s2io_card_up(nic_t *nic); int get_xena_rev_id(struct pci_dev *pdev); +void restore_xmsi_data(nic_t *nic); #endif /* _S2IO_H */ -- GitLab From 868d5309942927dc86f57009420c5d366ec05daa Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 06:58:59 -0400 Subject: [PATCH 0176/1519] e1000: Support for 82571 and 82572 controllers Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 9 +- drivers/net/e1000/e1000_hw.c | 219 +++++++++++++++++++++++++----- drivers/net/e1000/e1000_hw.h | 96 +++++++++++-- drivers/net/e1000/e1000_main.c | 102 ++++++++++++-- 4 files changed, 372 insertions(+), 54 deletions(-) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8f3a13420278..5f9a36bb77f5 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -696,6 +696,11 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) * Some bits that get toggled are ignored. */ switch (adapter->hw.mac_type) { + /* there are several bits on newer hardware that are r/w */ + case e1000_82571: + case e1000_82572: + toggle = 0x7FFFF3FF; + break; case e1000_82573: toggle = 0x7FFFF033; break; @@ -1245,6 +1250,8 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter) case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: + case e1000_82571: + case e1000_82572: case e1000_82573: return e1000_integrated_phy_loopback(adapter); break; @@ -1625,7 +1632,7 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); - if(adapter->hw.mac_type < e1000_82573) { + if(adapter->hw.mac_type < e1000_82571) { if(!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); adapter->blink_timer.function = e1000_led_blink_callback; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 045f5426ab9a..7d627dd89a3d 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -83,14 +83,14 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = static const uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = - { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, - 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58, - 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74, - 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90, - 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108, - 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124, - 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128, - 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128}; + { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, + 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, + 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, + 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, + 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, + 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, + 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, + 104, 109, 114, 118, 121, 124}; /****************************************************************************** @@ -286,7 +286,6 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82546GB_SERDES: case E1000_DEV_ID_82546GB_PCIE: - case E1000_DEV_ID_82546GB_QUAD_COPPER: hw->mac_type = e1000_82546_rev_3; break; case E1000_DEV_ID_82541EI: @@ -305,8 +304,19 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; + case E1000_DEV_ID_82571EB_COPPER: + case E1000_DEV_ID_82571EB_FIBER: + case E1000_DEV_ID_82571EB_SERDES: + hw->mac_type = e1000_82571; + break; + case E1000_DEV_ID_82572EI_COPPER: + case E1000_DEV_ID_82572EI_FIBER: + case E1000_DEV_ID_82572EI_SERDES: + hw->mac_type = e1000_82572; + break; case E1000_DEV_ID_82573E: case E1000_DEV_ID_82573E_IAMT: + case E1000_DEV_ID_82573L: hw->mac_type = e1000_82573; break; default: @@ -315,6 +325,8 @@ e1000_set_mac_type(struct e1000_hw *hw) } switch(hw->mac_type) { + case e1000_82571: + case e1000_82572: case e1000_82573: hw->eeprom_semaphore_present = TRUE; /* fall through */ @@ -351,6 +363,8 @@ e1000_set_media_type(struct e1000_hw *hw) switch (hw->device_id) { case E1000_DEV_ID_82545GM_SERDES: case E1000_DEV_ID_82546GB_SERDES: + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82572EI_SERDES: hw->media_type = e1000_media_type_internal_serdes; break; default: @@ -523,6 +537,8 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(hw); /* fall through */ + case e1000_82571: + case e1000_82572: ret_val = e1000_get_auto_rd_done(hw); if(ret_val) /* We don't want to continue accessing MAC registers. */ @@ -683,6 +699,9 @@ e1000_init_hw(struct e1000_hw *hw) switch (hw->mac_type) { default: break; + case e1000_82571: + case e1000_82572: + ctrl |= (1 << 22); case e1000_82573: ctrl |= E1000_TXDCTL_COUNT_DESC; break; @@ -694,6 +713,25 @@ e1000_init_hw(struct e1000_hw *hw) e1000_enable_tx_pkt_filtering(hw); } + switch (hw->mac_type) { + default: + break; + case e1000_82571: + ctrl = E1000_READ_REG(hw, TXDCTL1); + ctrl &= ~E1000_TXDCTL_WTHRESH; + ctrl |= E1000_TXDCTL_COUNT_DESC | E1000_TXDCTL_FULL_TX_DESC_WB; + ctrl |= (1 << 22); + E1000_WRITE_REG(hw, TXDCTL1, ctrl); + break; + } + + + + if (hw->mac_type == e1000_82573) { + uint32_t gcr = E1000_READ_REG(hw, GCR); + gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + E1000_WRITE_REG(hw, GCR, gcr); + } /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link @@ -878,6 +916,14 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) DEBUGFUNC("e1000_setup_fiber_serdes_link"); + /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists + * until explicitly turned off or a power cycle is performed. A read to + * the register does not indicate its status. Therefore, we ensure + * loopback mode is disabled during initialization. + */ + if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) + E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); + /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. @@ -2943,6 +2989,8 @@ e1000_phy_reset(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_82541_rev_2: + case e1000_82571: + case e1000_82572: ret_val = e1000_phy_hw_reset(hw); if(ret_val) return ret_val; @@ -2981,6 +3029,16 @@ e1000_detect_gig_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_detect_gig_phy"); + /* The 82571 firmware may still be configuring the PHY. In this + * case, we cannot access the PHY until the configuration is done. So + * we explicitly set the PHY values. */ + if(hw->mac_type == e1000_82571 || + hw->mac_type == e1000_82572) { + hw->phy_id = IGP01E1000_I_PHY_ID; + hw->phy_type = e1000_phy_igp_2; + return E1000_SUCCESS; + } + /* Read the PHY ID Registers to identify which PHY is onboard. */ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); if(ret_val) @@ -3334,6 +3392,21 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eerd = FALSE; eeprom->use_eewr = FALSE; break; + case e1000_82571: + case e1000_82572: + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; + break; case e1000_82573: eeprom->type = e1000_eeprom_spi; eeprom->opcode_bits = 8; @@ -3543,25 +3616,26 @@ e1000_acquire_eeprom(struct e1000_hw *hw) eecd = E1000_READ_REG(hw, EECD); if (hw->mac_type != e1000_82573) { - /* Request EEPROM Access */ - if(hw->mac_type > e1000_82544) { - eecd |= E1000_EECD_REQ; - E1000_WRITE_REG(hw, EECD, eecd); - eecd = E1000_READ_REG(hw, EECD); - while((!(eecd & E1000_EECD_GNT)) && - (i < E1000_EEPROM_GRANT_ATTEMPTS)) { - i++; - udelay(5); - eecd = E1000_READ_REG(hw, EECD); - } - if(!(eecd & E1000_EECD_GNT)) { - eecd &= ~E1000_EECD_REQ; + /* Request EEPROM Access */ + if(hw->mac_type > e1000_82544) { + eecd |= E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); - DEBUGOUT("Could not acquire EEPROM grant\n"); - return -E1000_ERR_EEPROM; + eecd = E1000_READ_REG(hw, EECD); + while((!(eecd & E1000_EECD_GNT)) && + (i < E1000_EEPROM_GRANT_ATTEMPTS)) { + i++; + udelay(5); + eecd = E1000_READ_REG(hw, EECD); + } + if(!(eecd & E1000_EECD_GNT)) { + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, EECD, eecd); + DEBUGOUT("Could not acquire EEPROM grant\n"); + e1000_put_hw_eeprom_semaphore(hw); + return -E1000_ERR_EEPROM; + } } } - } /* Setup EEPROM for Read/Write */ @@ -4064,7 +4138,7 @@ e1000_write_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } - /* 82573 reads only through eerd */ + /* 82573 writes only through eewr */ if(eeprom->use_eewr == TRUE) return e1000_write_eeprom_eewr(hw, offset, words, data); @@ -4353,9 +4427,16 @@ e1000_read_mac_addr(struct e1000_hw * hw) hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF); hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8); } - if(((hw->mac_type == e1000_82546) || (hw->mac_type == e1000_82546_rev_3)) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) + switch (hw->mac_type) { + default: + break; + case e1000_82546: + case e1000_82546_rev_3: + case e1000_82571: + if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) hw->perm_mac_addr[5] ^= 0x01; + break; + } for(i = 0; i < NODE_ADDRESS_SIZE; i++) hw->mac_addr[i] = hw->perm_mac_addr[i]; @@ -4385,6 +4466,12 @@ e1000_init_rx_addrs(struct e1000_hw *hw) e1000_rar_set(hw, hw->mac_addr, 0); rar_num = E1000_RAR_ENTRIES; + + /* Reserve a spot for the Locally Administered Address to work around + * an 82571 issue in which a reset on one port will reload the MAC on + * the other port. */ + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + rar_num -= 1; /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); for(i = 1; i < rar_num; i++) { @@ -4427,6 +4514,12 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear RAR[1-15] */ DEBUGOUT(" Clearing RAR[1-15]\n"); num_rar_entry = E1000_RAR_ENTRIES; + /* Reserve a spot for the Locally Administered Address to work around + * an 82571 issue in which a reset on one port will reload the MAC on + * the other port. */ + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + num_rar_entry -= 1; + for(i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); @@ -4984,7 +5077,6 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, ICTXQEC); temp = E1000_READ_REG(hw, ICTXQMTC); temp = E1000_READ_REG(hw, ICRXDMTC); - } /****************************************************************************** @@ -5151,6 +5243,8 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82571: + case e1000_82572: case e1000_82573: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; @@ -5250,6 +5344,7 @@ e1000_get_cable_length(struct e1000_hw *hw, int32_t ret_val; uint16_t agc_value = 0; uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE; + uint16_t max_agc = 0; uint16_t i, phy_data; uint16_t cable_length; @@ -5338,6 +5433,40 @@ e1000_get_cable_length(struct e1000_hw *hw, IGP01E1000_AGC_RANGE) : 0; *max_length = e1000_igp_cable_length_table[agc_value] + IGP01E1000_AGC_RANGE; + } else if (hw->phy_type == e1000_phy_igp_2) { + uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = + {IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D}; + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { + ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + /* Getting bits 15:9, which represent the combination of course and + * fine gain values. The result is a number that can be put into + * the lookup table to obtain the approximate cable length. */ + cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK; + + /* Remove min & max AGC values from calculation. */ + if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc]) + min_agc = cur_agc; + if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc]) + max_agc = cur_agc; + + agc_value += e1000_igp_2_cable_length_table[cur_agc]; + } + + agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]); + agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); + + /* Calculate cable length with the error range of +/- 10 meters. */ + *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0; + *max_length = agc_value + IGP02E1000_AGC_RANGE; } return E1000_SUCCESS; @@ -6465,6 +6594,8 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) default: msec_delay(5); break; + case e1000_82571: + case e1000_82572: case e1000_82573: while(timeout) { if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; @@ -6494,10 +6625,31 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw) { + int32_t timeout = PHY_CFG_TIMEOUT; + uint32_t cfg_mask = E1000_EEPROM_CFG_DONE; + DEBUGFUNC("e1000_get_phy_cfg_done"); - /* Simply wait for 10ms */ - msec_delay(10); + switch (hw->mac_type) { + default: + msec_delay(10); + break; + case e1000_82571: + case e1000_82572: + while (timeout) { + if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask) + break; + else + msec_delay(1); + timeout--; + } + + if (!timeout) { + DEBUGOUT("MNG configuration cycle has not completed.\n"); + return -E1000_ERR_RESET; + } + break; + } return E1000_SUCCESS; } @@ -6569,8 +6721,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) return; swsm = E1000_READ_REG(hw, SWSM); - /* Release both semaphores. */ - swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + swsm &= ~(E1000_SWSM_SWESMBI); E1000_WRITE_REG(hw, SWSM, swsm); } @@ -6606,6 +6757,8 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) * if this is the case. We read FWSM to determine the manageability mode. */ switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: case e1000_82573: fwsm = E1000_READ_REG(hw, FWSM); if((fwsm & E1000_FWSM_MODE_MASK) != 0) diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 51c2b3a18b6f..4f2c196dc314 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -57,6 +57,8 @@ typedef enum { e1000_82541_rev_2, e1000_82547, e1000_82547_rev_2, + e1000_82571, + e1000_82572, e1000_82573, e1000_num_macs } e1000_mac_type; @@ -478,10 +480,16 @@ uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); #define E1000_DEV_ID_82546GB_SERDES 0x107B #define E1000_DEV_ID_82546GB_PCIE 0x108A #define E1000_DEV_ID_82547EI 0x1019 +#define E1000_DEV_ID_82571EB_COPPER 0x105E +#define E1000_DEV_ID_82571EB_FIBER 0x105F +#define E1000_DEV_ID_82571EB_SERDES 0x1060 +#define E1000_DEV_ID_82572EI_COPPER 0x107D +#define E1000_DEV_ID_82572EI_FIBER 0x107E +#define E1000_DEV_ID_82572EI_SERDES 0x107F #define E1000_DEV_ID_82573E 0x108B #define E1000_DEV_ID_82573E_IAMT 0x108C +#define E1000_DEV_ID_82573L 0x109A -#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -833,6 +841,8 @@ struct e1000_ffvt_entry { #define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX #define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX +#define E1000_DISABLE_SERDES_LOOPBACK 0x0400 + /* Register Set. (82543, 82544) * * Registers are defined to be 32 bits and should be accessed as 32 bit values. @@ -853,6 +863,7 @@ struct e1000_ffvt_entry { #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ #define E1000_FLA 0x0001C /* Flash Access - RW */ #define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ @@ -864,6 +875,12 @@ struct e1000_ffvt_entry { #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ #define E1000_RCTL 0x00100 /* RX Control - RW */ +#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ +#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ +#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ +#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ +#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ +#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ @@ -895,6 +912,12 @@ struct e1000_ffvt_entry { #define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ #define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ #define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ +#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ +#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ +#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ +#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ +#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ +#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ #define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ @@ -980,15 +1003,15 @@ struct e1000_ffvt_entry { #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ -#define E1000_IAC 0x4100 /* Interrupt Assertion Count */ -#define E1000_ICRXPTC 0x4104 /* Interrupt Cause Rx Packet Timer Expire Count */ -#define E1000_ICRXATC 0x4108 /* Interrupt Cause Rx Absolute Timer Expire Count */ -#define E1000_ICTXPTC 0x410C /* Interrupt Cause Tx Packet Timer Expire Count */ -#define E1000_ICTXATC 0x4110 /* Interrupt Cause Tx Absolute Timer Expire Count */ -#define E1000_ICTXQEC 0x4118 /* Interrupt Cause Tx Queue Empty Count */ -#define E1000_ICTXQMTC 0x411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ -#define E1000_ICRXDMTC 0x4120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ -#define E1000_ICRXOC 0x4124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ #define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ @@ -1018,6 +1041,14 @@ struct e1000_ffvt_entry { #define E1000_FWSM 0x05B54 /* FW Semaphore */ #define E1000_FFLT_DBG 0x05F04 /* Debug Register */ #define E1000_HICR 0x08F00 /* Host Inteface Control */ + +/* RSS registers */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ +#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ /* Register Set (82542) * * Some of the 82542 registers are located at different offsets than they are @@ -1032,6 +1063,7 @@ struct e1000_ffvt_entry { #define E1000_82542_CTRL_EXT E1000_CTRL_EXT #define E1000_82542_FLA E1000_FLA #define E1000_82542_MDIC E1000_MDIC +#define E1000_82542_SCTL E1000_SCTL #define E1000_82542_FCAL E1000_FCAL #define E1000_82542_FCAH E1000_FCAH #define E1000_82542_FCT E1000_FCT @@ -1049,6 +1081,18 @@ struct e1000_ffvt_entry { #define E1000_82542_RDLEN 0x00118 #define E1000_82542_RDH 0x00120 #define E1000_82542_RDT 0x00128 +#define E1000_82542_RDTR0 E1000_82542_RDTR +#define E1000_82542_RDBAL0 E1000_82542_RDBAL +#define E1000_82542_RDBAH0 E1000_82542_RDBAH +#define E1000_82542_RDLEN0 E1000_82542_RDLEN +#define E1000_82542_RDH0 E1000_82542_RDH +#define E1000_82542_RDT0 E1000_82542_RDT +#define E1000_82542_RDTR1 0x00130 +#define E1000_82542_RDBAL1 0x00138 +#define E1000_82542_RDBAH1 0x0013C +#define E1000_82542_RDLEN1 0x00140 +#define E1000_82542_RDH1 0x00148 +#define E1000_82542_RDT1 0x00150 #define E1000_82542_FCRTH 0x00160 #define E1000_82542_FCRTL 0x00168 #define E1000_82542_FCTTV E1000_FCTTV @@ -1197,6 +1241,13 @@ struct e1000_ffvt_entry { #define E1000_82542_ICRXOC E1000_ICRXOC #define E1000_82542_HICR E1000_HICR +#define E1000_82542_CPUVEC E1000_CPUVEC +#define E1000_82542_MRQC E1000_MRQC +#define E1000_82542_RETA E1000_RETA +#define E1000_82542_RSSRK E1000_RSSRK +#define E1000_82542_RSSIM E1000_RSSIM +#define E1000_82542_RSSIR E1000_RSSIR + /* Statistics counters collected by the MAC */ struct e1000_hw_stats { uint64_t crcerrs; @@ -1336,6 +1387,7 @@ struct e1000_hw { boolean_t serdes_link_down; boolean_t tbi_compatibility_en; boolean_t tbi_compatibility_on; + boolean_t laa_is_present; boolean_t phy_reset_disable; boolean_t fc_send_xon; boolean_t fc_strict_ieee; @@ -1374,6 +1426,7 @@ struct e1000_hw { #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ #define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ @@ -1491,6 +1544,8 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 +#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */ +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ @@ -1524,6 +1579,7 @@ struct e1000_hw { #define E1000_LEDCTL_LED2_BLINK 0x00800000 #define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 #define E1000_LEDCTL_LED3_MODE_SHIFT 24 +#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000 #define E1000_LEDCTL_LED3_IVRT 0x40000000 #define E1000_LEDCTL_LED3_BLINK 0x80000000 @@ -1784,6 +1840,16 @@ struct e1000_hw { #define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ #define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ +/* Multiple Receive Queue Control */ +#define E1000_MRQC_ENABLE_MASK 0x00000003 +#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001 +#define E1000_MRQC_ENABLE_RSS_INT 0x00000004 +#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000 +#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 /* Definitions for power management and wakeup registers */ /* Wake Up Control */ @@ -1928,6 +1994,7 @@ struct e1000_host_command_info { #define E1000_MDALIGN 4096 #define E1000_GCR_BEM32 0x00400000 +#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 /* Function Active and Power State to MNG */ #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 #define E1000_FACTPS_LAN0_VALID 0x00000004 @@ -1980,6 +2047,7 @@ struct e1000_host_command_info { /* EEPROM Word Offsets */ #define EEPROM_COMPAT 0x0003 #define EEPROM_ID_LED_SETTINGS 0x0004 +#define EEPROM_VERSION 0x0005 #define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ #define EEPROM_PHY_CLASS_WORD 0x0007 #define EEPROM_INIT_CONTROL1_REG 0x000A @@ -1990,6 +2058,8 @@ struct e1000_host_command_info { #define EEPROM_FLASH_VERSION 0x0032 #define EEPROM_CHECKSUM_REG 0x003F +#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ + /* Word definitions for ID LED Settings */ #define ID_LED_RESERVED_0000 0x0000 #define ID_LED_RESERVED_FFFF 0xFFFF @@ -2108,6 +2178,8 @@ struct e1000_host_command_info { #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 #define E1000_PBA_30K 0x001E +#define E1000_PBA_32K 0x0020 +#define E1000_PBA_38K 0x0026 #define E1000_PBA_40K 0x0028 #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ @@ -2592,11 +2664,11 @@ struct e1000_host_command_info { /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */ #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128 -#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 128 +#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113 /* The precision error of the cable length is +/- 10 meters */ #define IGP01E1000_AGC_RANGE 10 -#define IGP02E1000_AGC_RANGE 10 +#define IGP02E1000_AGC_RANGE 15 /* IGP01E1000 PCS Initialization register */ /* bits 3:6 in the PCS registers stores the channels polarity */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index c062b0ad8262..407abb2c0548 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -398,6 +398,10 @@ e1000_reset(struct e1000_adapter *adapter) case e1000_82547_rev_2: pba = E1000_PBA_30K; break; + case e1000_82571: + case e1000_82572: + pba = E1000_PBA_38K; + break; case e1000_82573: pba = E1000_PBA_12K; break; @@ -475,6 +479,7 @@ e1000_probe(struct pci_dev *pdev, struct net_device *netdev; struct e1000_adapter *adapter; unsigned long mmio_start, mmio_len; + uint32_t ctrl_ext; uint32_t swsm; static int cards_found = 0; @@ -688,6 +693,12 @@ e1000_probe(struct pci_dev *pdev, /* Let firmware know the driver has taken over */ switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -732,6 +743,7 @@ e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); + uint32_t ctrl_ext; uint32_t manc, swsm; flush_scheduled_work(); @@ -746,6 +758,12 @@ e1000_remove(struct pci_dev *pdev) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -1236,7 +1254,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter) rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ - if(adapter->hw.mac_type == e1000_82573) { + if(adapter->hw.mac_type >= e1000_82571) { /* We can now specify buffers in 1K increments. * BSIZE and BSEX are ignored in this case. */ rctl |= adapter->rx_buffer_len << 0x11; @@ -1352,7 +1370,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) if(adapter->rx_csum == TRUE) { rxcsum |= E1000_RXCSUM_TUOFL; - /* Enable 82573 IPv4 payload checksum for UDP fragments + /* Enable 82571 IPv4 payload checksum for UDP fragments * Must be used in conjunction with packet-split. */ if((adapter->hw.mac_type > e1000_82547_rev_2) && (adapter->rx_ps)) { @@ -1608,6 +1626,22 @@ e1000_set_mac(struct net_device *netdev, void *p) e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0); + /* With 82571 controllers, LAA may be overwritten (with the default) + * due to controller reset from the other port. */ + if (adapter->hw.mac_type == e1000_82571) { + /* activate the work around */ + adapter->hw.laa_is_present = 1; + + /* Hold a copy of the LAA in RAR[14] This is done so that + * between the time RAR[0] gets clobbered and the time it + * gets fixed (in e1000_watchdog), the actual LAA is in one + * of the RARs and no incoming packets directed to this port + * are dropped. Eventaully the LAA will be in RAR[0] and + * RAR[14] */ + e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, + E1000_RAR_ENTRIES - 1); + } + if(adapter->hw.mac_type == e1000_82542_rev2_0) e1000_leave_82542_rst(adapter); @@ -1633,9 +1667,12 @@ e1000_set_multi(struct net_device *netdev) unsigned long flags; uint32_t rctl; uint32_t hash_value; - int i; + int i, rar_entries = E1000_RAR_ENTRIES; spin_lock_irqsave(&adapter->tx_lock, flags); + /* reserve RAR[14] for LAA over-write work-around */ + if (adapter->hw.mac_type == e1000_82571) + rar_entries--; /* Check for Promiscuous and All Multicast modes */ @@ -1660,11 +1697,12 @@ e1000_set_multi(struct net_device *netdev) /* load the first 14 multicast address into the exact filters 1-14 * RAR 0 is used for the station MAC adddress * if there are not 14 addresses, go ahead and clear the filters + * -- with 82571 controllers only 0-13 entries are filled here */ mc_ptr = netdev->mc_list; - for(i = 1; i < E1000_RAR_ENTRIES; i++) { - if(mc_ptr) { + for(i = 1; i < rar_entries; i++) { + if (mc_ptr) { e1000_rar_set(hw, mc_ptr->dmi_addr, i); mc_ptr = mc_ptr->next; } else { @@ -1848,6 +1886,11 @@ e1000_watchdog_task(struct e1000_adapter *adapter) /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = TRUE; + /* With 82571 controllers, LAA may be overwritten due to controller + * reset from the other port. Set the appropriate LAA in RAR[0] */ + if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present) + e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0); + /* Reset the timer */ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); } @@ -2269,6 +2312,27 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) local_irq_restore(flags); return NETDEV_TX_LOCKED; } +#ifdef NETIF_F_TSO + /* TSO Workaround for 82571/2 Controllers -- if skb->data + * points to just header, pull a few bytes of payload from + * frags into skb->data */ + if (skb_shinfo(skb)->tso_size) { + uint8_t hdr_len; + hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); + if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) && + (adapter->hw.mac_type == e1000_82571 || + adapter->hw.mac_type == e1000_82572)) { + unsigned int pull_size; + pull_size = min((unsigned int)4, skb->data_len); + if (!__pskb_pull_tail(skb, pull_size)) { + printk(KERN_ERR "__pskb_pull_tail failed.\n"); + dev_kfree_skb_any(skb); + return -EFAULT; + } + } + } +#endif + if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) ) e1000_transfer_dhcp_info(adapter, skb); @@ -2310,7 +2374,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. - * 82573 hardware supports TSO capabilities for IPv6 as well... + * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ if(likely(skb->protocol == ntohs(ETH_P_IP))) tx_flags |= E1000_TX_FLAGS_IPV4; @@ -2389,9 +2453,18 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } -#define MAX_STD_JUMBO_FRAME_SIZE 9216 +#define MAX_STD_JUMBO_FRAME_SIZE 9234 /* might want this to be bigger enum check... */ - if (adapter->hw.mac_type == e1000_82573 && + /* 82571 controllers limit jumbo frame size to 10500 bytes */ + if ((adapter->hw.mac_type == e1000_82571 || + adapter->hw.mac_type == e1000_82572) && + max_frame > MAX_STD_JUMBO_FRAME_SIZE) { + DPRINTK(PROBE, ERR, "MTU > 9216 bytes not supported " + "on 82571 and 82572 controllers.\n"); + return -EINVAL; + } + + if(adapter->hw.mac_type == e1000_82573 && max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported " "on 82573\n"); @@ -3716,6 +3789,12 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -3738,6 +3817,7 @@ e1000_resume(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t manc, ret_val, swsm; + uint32_t ctrl_ext; pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); @@ -3763,6 +3843,12 @@ e1000_resume(struct pci_dev *pdev) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, -- GitLab From 581d708eb47cccb5f41bc0817e50c9b004011ba8 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:01:55 -0400 Subject: [PATCH 0177/1519] e1000: multi-queue defines/modification to data structures defines/modifies data structures, function prototypes and changes to the driver rendering it capable of handling tx/rx queues Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000.h | 67 ++- drivers/net/e1000/e1000_ethtool.c | 75 ++-- drivers/net/e1000/e1000_main.c | 655 ++++++++++++++++++++---------- drivers/net/e1000/e1000_param.c | 10 +- 4 files changed, 564 insertions(+), 243 deletions(-) diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 092757bc721f..9b7274b111f3 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -72,6 +72,10 @@ #include #include #include +#ifdef CONFIG_E1000_MQ +#include +#include +#endif #define BAR_0 0 #define BAR_1 1 @@ -168,7 +172,30 @@ struct e1000_buffer { struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; }; struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; }; -struct e1000_desc_ring { +struct e1000_tx_ring { + /* pointer to the descriptor ring memory */ + void *desc; + /* physical address of the descriptor ring */ + dma_addr_t dma; + /* length of descriptor ring in bytes */ + unsigned int size; + /* number of descriptors in the ring */ + unsigned int count; + /* next descriptor to associate a buffer with */ + unsigned int next_to_use; + /* next descriptor to check for DD status bit */ + unsigned int next_to_clean; + /* array of buffer information structs */ + struct e1000_buffer *buffer_info; + + struct e1000_buffer previous_buffer_info; + spinlock_t tx_lock; + uint16_t tdh; + uint16_t tdt; + uint64_t pkt; +}; + +struct e1000_rx_ring { /* pointer to the descriptor ring memory */ void *desc; /* physical address of the descriptor ring */ @@ -186,6 +213,10 @@ struct e1000_desc_ring { /* arrays of page information for packet split */ struct e1000_ps_page *ps_page; struct e1000_ps_page_dma *ps_page_dma; + + uint16_t rdh; + uint16_t rdt; + uint64_t pkt; }; #define E1000_DESC_UNUSED(R) \ @@ -227,9 +258,10 @@ struct e1000_adapter { unsigned long led_status; /* TX */ - struct e1000_desc_ring tx_ring; - struct e1000_buffer previous_buffer_info; - spinlock_t tx_lock; + struct e1000_tx_ring *tx_ring; /* One per active queue */ +#ifdef CONFIG_E1000_MQ + struct e1000_tx_ring **cpu_tx_ring; /* per-cpu */ +#endif uint32_t txd_cmd; uint32_t tx_int_delay; uint32_t tx_abs_int_delay; @@ -246,13 +278,26 @@ struct e1000_adapter { /* RX */ #ifdef CONFIG_E1000_NAPI - boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done, - int work_to_do); + boolean_t (*clean_rx) (struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do); #else - boolean_t (*clean_rx) (struct e1000_adapter *adapter); + boolean_t (*clean_rx) (struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); #endif - void (*alloc_rx_buf) (struct e1000_adapter *adapter); - struct e1000_desc_ring rx_ring; + void (*alloc_rx_buf) (struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); + struct e1000_rx_ring *rx_ring; /* One per active queue */ +#ifdef CONFIG_E1000_NAPI + struct net_device *polling_netdev; /* One per active queue */ +#endif +#ifdef CONFIG_E1000_MQ + struct net_device **cpu_netdev; /* per-cpu */ + struct call_async_data_struct rx_sched_call_data; + int cpu_for_queue[4]; +#endif + int num_queues; + uint64_t hw_csum_err; uint64_t hw_csum_good; uint32_t rx_int_delay; @@ -278,8 +323,8 @@ struct e1000_adapter { struct e1000_phy_stats phy_stats; uint32_t test_icr; - struct e1000_desc_ring test_tx_ring; - struct e1000_desc_ring test_rx_ring; + struct e1000_tx_ring test_tx_ring; + struct e1000_rx_ring test_rx_ring; int msg_enable; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 5f9a36bb77f5..6e7e34f59a34 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -39,10 +39,10 @@ extern int e1000_up(struct e1000_adapter *adapter); extern void e1000_down(struct e1000_adapter *adapter); extern void e1000_reset(struct e1000_adapter *adapter); extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); -extern int e1000_setup_rx_resources(struct e1000_adapter *adapter); -extern int e1000_setup_tx_resources(struct e1000_adapter *adapter); -extern void e1000_free_rx_resources(struct e1000_adapter *adapter); -extern void e1000_free_tx_resources(struct e1000_adapter *adapter); +extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); +extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); +extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter); +extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter); extern void e1000_update_stats(struct e1000_adapter *adapter); struct e1000_stats { @@ -576,8 +576,8 @@ e1000_get_ringparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); e1000_mac_type mac_type = adapter->hw.mac_type; - struct e1000_desc_ring *txdr = &adapter->tx_ring; - struct e1000_desc_ring *rxdr = &adapter->rx_ring; + struct e1000_tx_ring *txdr = adapter->tx_ring; + struct e1000_rx_ring *rxdr = adapter->rx_ring; ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD : E1000_MAX_82544_RXD; @@ -597,20 +597,40 @@ e1000_set_ringparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); e1000_mac_type mac_type = adapter->hw.mac_type; - struct e1000_desc_ring *txdr = &adapter->tx_ring; - struct e1000_desc_ring *rxdr = &adapter->rx_ring; - struct e1000_desc_ring tx_old, tx_new, rx_old, rx_new; - int err; + struct e1000_tx_ring *txdr, *tx_old, *tx_new; + struct e1000_rx_ring *rxdr, *rx_old, *rx_new; + int i, err, tx_ring_size, rx_ring_size; + + tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_queues; + rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_queues; + + if (netif_running(adapter->netdev)) + e1000_down(adapter); tx_old = adapter->tx_ring; rx_old = adapter->rx_ring; + adapter->tx_ring = kmalloc(tx_ring_size, GFP_KERNEL); + if (!adapter->tx_ring) { + err = -ENOMEM; + goto err_setup_rx; + } + memset(adapter->tx_ring, 0, tx_ring_size); + + adapter->rx_ring = kmalloc(rx_ring_size, GFP_KERNEL); + if (!adapter->rx_ring) { + kfree(adapter->tx_ring); + err = -ENOMEM; + goto err_setup_rx; + } + memset(adapter->rx_ring, 0, rx_ring_size); + + txdr = adapter->tx_ring; + rxdr = adapter->rx_ring; + if((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; - if(netif_running(adapter->netdev)) - e1000_down(adapter); - rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD); rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD)); @@ -621,11 +641,16 @@ e1000_set_ringparam(struct net_device *netdev, E1000_MAX_TXD : E1000_MAX_82544_TXD)); E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); + for (i = 0; i < adapter->num_queues; i++) { + txdr[i].count = txdr->count; + rxdr[i].count = rxdr->count; + } + if(netif_running(adapter->netdev)) { /* Try to get new resources before deleting old */ - if((err = e1000_setup_rx_resources(adapter))) + if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; - if((err = e1000_setup_tx_resources(adapter))) + if ((err = e1000_setup_all_tx_resources(adapter))) goto err_setup_tx; /* save the new, restore the old in order to free it, @@ -635,8 +660,10 @@ e1000_set_ringparam(struct net_device *netdev, tx_new = adapter->tx_ring; adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; - e1000_free_rx_resources(adapter); - e1000_free_tx_resources(adapter); + e1000_free_all_rx_resources(adapter); + e1000_free_all_tx_resources(adapter); + kfree(tx_old); + kfree(rx_old); adapter->rx_ring = rx_new; adapter->tx_ring = tx_new; if((err = e1000_up(adapter))) @@ -645,7 +672,7 @@ e1000_set_ringparam(struct net_device *netdev, return 0; err_setup_tx: - e1000_free_rx_resources(adapter); + e1000_free_all_rx_resources(adapter); err_setup_rx: adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; @@ -903,8 +930,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) static void e1000_free_desc_rings(struct e1000_adapter *adapter) { - struct e1000_desc_ring *txdr = &adapter->test_tx_ring; - struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; int i; @@ -946,8 +973,8 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) static int e1000_setup_desc_rings(struct e1000_adapter *adapter) { - struct e1000_desc_ring *txdr = &adapter->test_tx_ring; - struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; uint32_t rctl; int size, i, ret_val; @@ -1347,8 +1374,8 @@ e1000_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size) static int e1000_run_loopback_test(struct e1000_adapter *adapter) { - struct e1000_desc_ring *txdr = &adapter->test_tx_ring; - struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; + struct e1000_tx_ring *txdr = &adapter->test_tx_ring; + struct e1000_rx_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; int i, j, k, l, lc, good_cnt, ret_val=0; unsigned long time; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 407abb2c0548..5145b7345c22 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -102,10 +102,18 @@ int e1000_up(struct e1000_adapter *adapter); void e1000_down(struct e1000_adapter *adapter); void e1000_reset(struct e1000_adapter *adapter); int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); -int e1000_setup_tx_resources(struct e1000_adapter *adapter); -int e1000_setup_rx_resources(struct e1000_adapter *adapter); -void e1000_free_tx_resources(struct e1000_adapter *adapter); -void e1000_free_rx_resources(struct e1000_adapter *adapter); +int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); +int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); +void e1000_free_all_tx_resources(struct e1000_adapter *adapter); +void e1000_free_all_rx_resources(struct e1000_adapter *adapter); +int e1000_setup_tx_resources(struct e1000_adapter *adapter, + struct e1000_tx_ring *txdr); +int e1000_setup_rx_resources(struct e1000_adapter *adapter, + struct e1000_rx_ring *rxdr); +void e1000_free_tx_resources(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring); +void e1000_free_rx_resources(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); void e1000_update_stats(struct e1000_adapter *adapter); /* Local Function Prototypes */ @@ -114,14 +122,22 @@ static int e1000_init_module(void); static void e1000_exit_module(void); static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent); static void __devexit e1000_remove(struct pci_dev *pdev); +static int e1000_alloc_queues(struct e1000_adapter *adapter); +#ifdef CONFIG_E1000_MQ +static void e1000_setup_queue_mapping(struct e1000_adapter *adapter); +#endif static int e1000_sw_init(struct e1000_adapter *adapter); static int e1000_open(struct net_device *netdev); static int e1000_close(struct net_device *netdev); static void e1000_configure_tx(struct e1000_adapter *adapter); static void e1000_configure_rx(struct e1000_adapter *adapter); static void e1000_setup_rctl(struct e1000_adapter *adapter); -static void e1000_clean_tx_ring(struct e1000_adapter *adapter); -static void e1000_clean_rx_ring(struct e1000_adapter *adapter); +static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter); +static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter); +static void e1000_clean_tx_ring(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring); +static void e1000_clean_rx_ring(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); static void e1000_set_multi(struct net_device *netdev); static void e1000_update_phy_info(unsigned long data); static void e1000_watchdog(unsigned long data); @@ -132,19 +148,26 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data, struct pt_regs *regs); -static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter); +static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring); #ifdef CONFIG_E1000_NAPI -static int e1000_clean(struct net_device *netdev, int *budget); +static int e1000_clean(struct net_device *poll_dev, int *budget); static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do); static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, int *work_done, int work_to_do); #else -static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter); -static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter); +static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); +static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); #endif -static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter); -static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter); +static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); +static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); @@ -289,7 +312,7 @@ int e1000_up(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int err; + int i, err; /* hardware has been reset, we need to reload some things */ @@ -308,7 +331,8 @@ e1000_up(struct e1000_adapter *adapter) e1000_configure_tx(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); - adapter->alloc_rx_buf(adapter); + for (i = 0; i < adapter->num_queues; i++) + adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]); #ifdef CONFIG_PCI_MSI if(adapter->hw.mac_type > e1000_82547_rev_2) { @@ -363,8 +387,8 @@ e1000_down(struct e1000_adapter *adapter) netif_stop_queue(netdev); e1000_reset(adapter); - e1000_clean_tx_ring(adapter); - e1000_clean_rx_ring(adapter); + e1000_clean_all_tx_rings(adapter); + e1000_clean_all_rx_rings(adapter); /* If WoL is not enabled * and management mode is not IAMT @@ -747,6 +771,9 @@ e1000_remove(struct pci_dev *pdev) uint32_t manc, swsm; flush_scheduled_work(); +#ifdef CONFIG_E1000_NAPI + int i; +#endif if(adapter->hw.mac_type >= e1000_82540 && adapter->hw.media_type == e1000_media_type_copper) { @@ -775,6 +802,10 @@ e1000_remove(struct pci_dev *pdev) } unregister_netdev(netdev); +#ifdef CONFIG_E1000_NAPI + for (i = 0; i < adapter->num_queues; i++) + __dev_put(&adapter->polling_netdev[i]); +#endif if(!e1000_check_phy_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); @@ -802,6 +833,9 @@ e1000_sw_init(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; +#ifdef CONFIG_E1000_NAPI + int i; +#endif /* PCI config space info */ @@ -859,13 +893,70 @@ e1000_sw_init(struct e1000_adapter *adapter) hw->master_slave = E1000_MASTER_SLAVE; } + adapter->num_queues = 1; + + if (e1000_alloc_queues(adapter)) { + DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + +#ifdef CONFIG_E1000_NAPI + for (i = 0; i < adapter->num_queues; i++) { + adapter->polling_netdev[i].priv = adapter; + adapter->polling_netdev[i].poll = &e1000_clean; + adapter->polling_netdev[i].weight = 64; + dev_hold(&adapter->polling_netdev[i]); + set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state); + } +#endif atomic_set(&adapter->irq_sem, 1); spin_lock_init(&adapter->stats_lock); - spin_lock_init(&adapter->tx_lock); return 0; } +/** + * e1000_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + * + * We allocate one ring per queue at run-time since we don't know the + * number of queues at compile-time. The polling_netdev array is + * intended for Multiqueue, but should work fine with a single queue. + **/ + +static int __devinit +e1000_alloc_queues(struct e1000_adapter *adapter) +{ + int size; + + size = sizeof(struct e1000_tx_ring) * adapter->num_queues; + adapter->tx_ring = kmalloc(size, GFP_KERNEL); + if (!adapter->tx_ring) + return -ENOMEM; + memset(adapter->tx_ring, 0, size); + + size = sizeof(struct e1000_rx_ring) * adapter->num_queues; + adapter->rx_ring = kmalloc(size, GFP_KERNEL); + if (!adapter->rx_ring) { + kfree(adapter->tx_ring); + return -ENOMEM; + } + memset(adapter->rx_ring, 0, size); + +#ifdef CONFIG_E1000_NAPI + size = sizeof(struct net_device) * adapter->num_queues; + adapter->polling_netdev = kmalloc(size, GFP_KERNEL); + if (!adapter->polling_netdev) { + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); + return -ENOMEM; + } + memset(adapter->polling_netdev, 0, size); +#endif + + return E1000_SUCCESS; +} + /** * e1000_open - Called when a network interface is made active * @netdev: network interface device structure @@ -887,12 +978,12 @@ e1000_open(struct net_device *netdev) /* allocate transmit descriptors */ - if((err = e1000_setup_tx_resources(adapter))) + if ((err = e1000_setup_all_tx_resources(adapter))) goto err_setup_tx; /* allocate receive descriptors */ - if((err = e1000_setup_rx_resources(adapter))) + if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; if((err = e1000_up(adapter))) @@ -906,9 +997,9 @@ e1000_open(struct net_device *netdev) return E1000_SUCCESS; err_up: - e1000_free_rx_resources(adapter); + e1000_free_all_rx_resources(adapter); err_setup_rx: - e1000_free_tx_resources(adapter); + e1000_free_all_tx_resources(adapter); err_setup_tx: e1000_reset(adapter); @@ -934,8 +1025,8 @@ e1000_close(struct net_device *netdev) e1000_down(adapter); - e1000_free_tx_resources(adapter); - e1000_free_rx_resources(adapter); + e1000_free_all_tx_resources(adapter); + e1000_free_all_rx_resources(adapter); if((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { @@ -970,14 +1061,15 @@ e1000_check_64k_bound(struct e1000_adapter *adapter, /** * e1000_setup_tx_resources - allocate Tx resources (Descriptors) * @adapter: board private structure + * @txdr: tx descriptor ring (for a specific queue) to setup * * Return 0 on success, negative on failure **/ int -e1000_setup_tx_resources(struct e1000_adapter *adapter) +e1000_setup_tx_resources(struct e1000_adapter *adapter, + struct e1000_tx_ring *txdr) { - struct e1000_desc_ring *txdr = &adapter->tx_ring; struct pci_dev *pdev = adapter->pdev; int size; @@ -1041,6 +1133,35 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter) return 0; } +/** + * e1000_setup_all_tx_resources - wrapper to allocate Tx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ + +int +e1000_setup_all_tx_resources(struct e1000_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_queues; i++) { + err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]); + if (err) { + DPRINTK(PROBE, ERR, + "Allocation for Tx Queue %u failed\n", i); + break; + } + } + + return err; +} + /** * e1000_configure_tx - Configure 8254x Transmit Unit after Reset * @adapter: board private structure @@ -1051,23 +1172,28 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter) static void e1000_configure_tx(struct e1000_adapter *adapter) { - uint64_t tdba = adapter->tx_ring.dma; - uint32_t tdlen = adapter->tx_ring.count * sizeof(struct e1000_tx_desc); - uint32_t tctl, tipg; - - E1000_WRITE_REG(&adapter->hw, TDBAL, (tdba & 0x00000000ffffffffULL)); - E1000_WRITE_REG(&adapter->hw, TDBAH, (tdba >> 32)); - - E1000_WRITE_REG(&adapter->hw, TDLEN, tdlen); + uint64_t tdba; + struct e1000_hw *hw = &adapter->hw; + uint32_t tdlen, tctl, tipg, tarc; /* Setup the HW Tx Head and Tail descriptor pointers */ E1000_WRITE_REG(&adapter->hw, TDH, 0); E1000_WRITE_REG(&adapter->hw, TDT, 0); + tdba = adapter->tx_ring[0].dma; + tdlen = adapter->tx_ring[0].count * + sizeof(struct e1000_tx_desc); + E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, TDBAH, (tdba >> 32)); + E1000_WRITE_REG(hw, TDLEN, tdlen); + E1000_WRITE_REG(hw, TDH, 0); + E1000_WRITE_REG(hw, TDT, 0); + adapter->tx_ring[0].tdh = E1000_TDH; + adapter->tx_ring[0].tdt = E1000_TDT; /* Set the default values for the Tx Inter Packet Gap timer */ - switch (adapter->hw.mac_type) { + switch (hw->mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: tipg = DEFAULT_82542_TIPG_IPGT; @@ -1075,67 +1201,68 @@ e1000_configure_tx(struct e1000_adapter *adapter) tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT; break; default: - if(adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) tipg = DEFAULT_82543_TIPG_IPGT_FIBER; else tipg = DEFAULT_82543_TIPG_IPGT_COPPER; tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT; tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT; } - E1000_WRITE_REG(&adapter->hw, TIPG, tipg); + E1000_WRITE_REG(hw, TIPG, tipg); /* Set the Tx Interrupt Delay register */ - E1000_WRITE_REG(&adapter->hw, TIDV, adapter->tx_int_delay); - if(adapter->hw.mac_type >= e1000_82540) - E1000_WRITE_REG(&adapter->hw, TADV, adapter->tx_abs_int_delay); + E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay); + if (hw->mac_type >= e1000_82540) + E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay); /* Program the Transmit Control Register */ - tctl = E1000_READ_REG(&adapter->hw, TCTL); + tctl = E1000_READ_REG(hw, TCTL); tctl &= ~E1000_TCTL_CT; tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); - E1000_WRITE_REG(&adapter->hw, TCTL, tctl); + E1000_WRITE_REG(hw, TCTL, tctl); - e1000_config_collision_dist(&adapter->hw); + e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; - if(adapter->hw.mac_type < e1000_82543) + if (hw->mac_type < e1000_82543) adapter->txd_cmd |= E1000_TXD_CMD_RPS; else adapter->txd_cmd |= E1000_TXD_CMD_RS; /* Cache if we're 82544 running in PCI-X because we'll * need this to apply a workaround later in the send path. */ - if(adapter->hw.mac_type == e1000_82544 && - adapter->hw.bus_type == e1000_bus_type_pcix) + if (hw->mac_type == e1000_82544 && + hw->bus_type == e1000_bus_type_pcix) adapter->pcix_82544 = 1; } /** * e1000_setup_rx_resources - allocate Rx resources (Descriptors) * @adapter: board private structure + * @rxdr: rx descriptor ring (for a specific queue) to setup * * Returns 0 on success, negative on failure **/ int -e1000_setup_rx_resources(struct e1000_adapter *adapter) +e1000_setup_rx_resources(struct e1000_adapter *adapter, + struct e1000_rx_ring *rxdr) { - struct e1000_desc_ring *rxdr = &adapter->rx_ring; struct pci_dev *pdev = adapter->pdev; int size, desc_len; size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vmalloc(size); - if(!rxdr->buffer_info) { + if (!rxdr->buffer_info) { DPRINTK(PROBE, ERR, "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; @@ -1175,13 +1302,13 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); - if(!rxdr->desc) { + if (!rxdr->desc) { + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); setup_rx_desc_die: vfree(rxdr->buffer_info); kfree(rxdr->ps_page); kfree(rxdr->ps_page_dma); - DPRINTK(PROBE, ERR, - "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; } @@ -1193,9 +1320,12 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) "at %p\n", rxdr->size, rxdr->desc); /* Try again, without freeing the previous */ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); - if(!rxdr->desc) { /* Failed allocation, critical failure */ + if (!rxdr->desc) { pci_free_consistent(pdev, rxdr->size, olddesc, olddma); + DPRINTK(PROBE, ERR, + "Unable to allocate memory " + "for the receive descriptor ring\n"); goto setup_rx_desc_die; } @@ -1207,10 +1337,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) DPRINTK(PROBE, ERR, "Unable to allocate aligned memory " "for the receive descriptor ring\n"); - vfree(rxdr->buffer_info); - kfree(rxdr->ps_page); - kfree(rxdr->ps_page_dma); - return -ENOMEM; + goto setup_rx_desc_die; } else { /* Free old allocation, new allocation was successful */ pci_free_consistent(pdev, rxdr->size, olddesc, olddma); @@ -1224,6 +1351,35 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) return 0; } +/** + * e1000_setup_all_rx_resources - wrapper to allocate Rx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ + +int +e1000_setup_all_rx_resources(struct e1000_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_queues; i++) { + err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]); + if (err) { + DPRINTK(PROBE, ERR, + "Allocation for Rx Queue %u failed\n", i); + break; + } + } + + return err; +} + /** * e1000_setup_rctl - configure the receive control registers * @adapter: Board private structure @@ -1326,47 +1482,55 @@ e1000_setup_rctl(struct e1000_adapter *adapter) static void e1000_configure_rx(struct e1000_adapter *adapter) { - uint64_t rdba = adapter->rx_ring.dma; - uint32_t rdlen, rctl, rxcsum; + uint64_t rdba; + struct e1000_hw *hw = &adapter->hw; + uint32_t rdlen, rctl, rxcsum, ctrl_ext; +#ifdef CONFIG_E1000_MQ + uint32_t reta, mrqc; + int i; +#endif if(adapter->rx_ps) { - rdlen = adapter->rx_ring.count * + rdlen = adapter->rx_ring[0].count * sizeof(union e1000_rx_desc_packet_split); adapter->clean_rx = e1000_clean_rx_irq_ps; adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; } else { - rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc); + rdlen = adapter->rx_ring[0].count * + sizeof(struct e1000_rx_desc); adapter->clean_rx = e1000_clean_rx_irq; adapter->alloc_rx_buf = e1000_alloc_rx_buffers; } /* disable receives while setting up the descriptors */ - rctl = E1000_READ_REG(&adapter->hw, RCTL); - E1000_WRITE_REG(&adapter->hw, RCTL, rctl & ~E1000_RCTL_EN); + rctl = E1000_READ_REG(hw, RCTL); + E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); /* set the Receive Delay Timer Register */ - E1000_WRITE_REG(&adapter->hw, RDTR, adapter->rx_int_delay); + E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay); - if(adapter->hw.mac_type >= e1000_82540) { - E1000_WRITE_REG(&adapter->hw, RADV, adapter->rx_abs_int_delay); + if (hw->mac_type >= e1000_82540) { + E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay); if(adapter->itr > 1) - E1000_WRITE_REG(&adapter->hw, ITR, + E1000_WRITE_REG(hw, ITR, 1000000000 / (adapter->itr * 256)); } - /* Setup the Base and Length of the Rx Descriptor Ring */ - E1000_WRITE_REG(&adapter->hw, RDBAL, (rdba & 0x00000000ffffffffULL)); - E1000_WRITE_REG(&adapter->hw, RDBAH, (rdba >> 32)); - - E1000_WRITE_REG(&adapter->hw, RDLEN, rdlen); - - /* Setup the HW Rx Head and Tail Descriptor Pointers */ - E1000_WRITE_REG(&adapter->hw, RDH, 0); - E1000_WRITE_REG(&adapter->hw, RDT, 0); + /* Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring */ + rdba = adapter->rx_ring[0].dma; + E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, RDBAH, (rdba >> 32)); + E1000_WRITE_REG(hw, RDLEN, rdlen); + E1000_WRITE_REG(hw, RDH, 0); + E1000_WRITE_REG(hw, RDT, 0); + adapter->rx_ring[0].rdh = E1000_RDH; + adapter->rx_ring[0].rdt = E1000_RDT; + break; /* Enable 82543 Receive Checksum Offload for TCP and UDP */ - if(adapter->hw.mac_type >= e1000_82543) { - rxcsum = E1000_READ_REG(&adapter->hw, RXCSUM); + if (hw->mac_type >= e1000_82543) { + rxcsum = E1000_READ_REG(hw, RXCSUM); if(adapter->rx_csum == TRUE) { rxcsum |= E1000_RXCSUM_TUOFL; @@ -1380,37 +1544,54 @@ e1000_configure_rx(struct e1000_adapter *adapter) rxcsum &= ~E1000_RXCSUM_TUOFL; /* don't need to clear IPPCSE as it defaults to 0 */ } - E1000_WRITE_REG(&adapter->hw, RXCSUM, rxcsum); + E1000_WRITE_REG(hw, RXCSUM, rxcsum); } - if (adapter->hw.mac_type == e1000_82573) - E1000_WRITE_REG(&adapter->hw, ERT, 0x0100); + if (hw->mac_type == e1000_82573) + E1000_WRITE_REG(hw, ERT, 0x0100); /* Enable Receives */ - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + E1000_WRITE_REG(hw, RCTL, rctl); } /** - * e1000_free_tx_resources - Free Tx Resources + * e1000_free_tx_resources - Free Tx Resources per Queue * @adapter: board private structure + * @tx_ring: Tx descriptor ring for a specific queue * * Free all transmit software resources **/ void -e1000_free_tx_resources(struct e1000_adapter *adapter) +e1000_free_tx_resources(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring) { struct pci_dev *pdev = adapter->pdev; - e1000_clean_tx_ring(adapter); + e1000_clean_tx_ring(adapter, tx_ring); - vfree(adapter->tx_ring.buffer_info); - adapter->tx_ring.buffer_info = NULL; + vfree(tx_ring->buffer_info); + tx_ring->buffer_info = NULL; - pci_free_consistent(pdev, adapter->tx_ring.size, - adapter->tx_ring.desc, adapter->tx_ring.dma); + pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma); - adapter->tx_ring.desc = NULL; + tx_ring->desc = NULL; +} + +/** + * e1000_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure + * + * Free all transmit software resources + **/ + +void +e1000_free_all_tx_resources(struct e1000_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_queues; i++) + e1000_free_tx_resources(adapter, &adapter->tx_ring[i]); } static inline void @@ -1433,21 +1614,22 @@ e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, /** * e1000_clean_tx_ring - Free Tx Buffers * @adapter: board private structure + * @tx_ring: ring to be cleaned **/ static void -e1000_clean_tx_ring(struct e1000_adapter *adapter) +e1000_clean_tx_ring(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring) { - struct e1000_desc_ring *tx_ring = &adapter->tx_ring; struct e1000_buffer *buffer_info; unsigned long size; unsigned int i; /* Free all the Tx ring sk_buffs */ - if (likely(adapter->previous_buffer_info.skb != NULL)) { + if (likely(tx_ring->previous_buffer_info.skb != NULL)) { e1000_unmap_and_free_tx_resource(adapter, - &adapter->previous_buffer_info); + &tx_ring->previous_buffer_info); } for(i = 0; i < tx_ring->count; i++) { @@ -1465,24 +1647,39 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter) tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; - E1000_WRITE_REG(&adapter->hw, TDH, 0); - E1000_WRITE_REG(&adapter->hw, TDT, 0); + writel(0, adapter->hw.hw_addr + tx_ring->tdh); + writel(0, adapter->hw.hw_addr + tx_ring->tdt); +} + +/** + * e1000_clean_all_tx_rings - Free Tx Buffers for all queues + * @adapter: board private structure + **/ + +static void +e1000_clean_all_tx_rings(struct e1000_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_queues; i++) + e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]); } /** * e1000_free_rx_resources - Free Rx Resources * @adapter: board private structure + * @rx_ring: ring to clean the resources from * * Free all receive software resources **/ void -e1000_free_rx_resources(struct e1000_adapter *adapter) +e1000_free_rx_resources(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct pci_dev *pdev = adapter->pdev; - e1000_clean_rx_ring(adapter); + e1000_clean_rx_ring(adapter, rx_ring); vfree(rx_ring->buffer_info); rx_ring->buffer_info = NULL; @@ -1497,14 +1694,31 @@ e1000_free_rx_resources(struct e1000_adapter *adapter) } /** - * e1000_clean_rx_ring - Free Rx Buffers + * e1000_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure + * + * Free all receive software resources + **/ + +void +e1000_free_all_rx_resources(struct e1000_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_queues; i++) + e1000_free_rx_resources(adapter, &adapter->rx_ring[i]); +} + +/** + * e1000_clean_rx_ring - Free Rx Buffers per Queue * @adapter: board private structure + * @rx_ring: ring to free buffers from **/ static void -e1000_clean_rx_ring(struct e1000_adapter *adapter) +e1000_clean_rx_ring(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct e1000_buffer *buffer_info; struct e1000_ps_page *ps_page; struct e1000_ps_page_dma *ps_page_dma; @@ -1553,8 +1767,22 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter) rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; - E1000_WRITE_REG(&adapter->hw, RDH, 0); - E1000_WRITE_REG(&adapter->hw, RDT, 0); + writel(0, adapter->hw.hw_addr + rx_ring->rdh); + writel(0, adapter->hw.hw_addr + rx_ring->rdt); +} + +/** + * e1000_clean_all_rx_rings - Free Rx Buffers for all queues + * @adapter: board private structure + **/ + +static void +e1000_clean_all_rx_rings(struct e1000_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_queues; i++) + e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]); } /* The 82542 2.0 (revision 2) needs to have the receive unit in reset @@ -1575,7 +1803,7 @@ e1000_enter_82542_rst(struct e1000_adapter *adapter) mdelay(5); if(netif_running(netdev)) - e1000_clean_rx_ring(adapter); + e1000_clean_all_rx_rings(adapter); } static void @@ -1595,7 +1823,7 @@ e1000_leave_82542_rst(struct e1000_adapter *adapter) if(netif_running(netdev)) { e1000_configure_rx(adapter); - e1000_alloc_rx_buffers(adapter); + e1000_alloc_rx_buffers(adapter, &adapter->rx_ring[0]); } } @@ -1664,12 +1892,10 @@ e1000_set_multi(struct net_device *netdev) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; struct dev_mc_list *mc_ptr; - unsigned long flags; uint32_t rctl; uint32_t hash_value; int i, rar_entries = E1000_RAR_ENTRIES; - spin_lock_irqsave(&adapter->tx_lock, flags); /* reserve RAR[14] for LAA over-write work-around */ if (adapter->hw.mac_type == e1000_82571) rar_entries--; @@ -1725,8 +1951,6 @@ e1000_set_multi(struct net_device *netdev) if(hw->mac_type == e1000_82542_rev2_0) e1000_leave_82542_rst(adapter); - - spin_unlock_irqrestore(&adapter->tx_lock, flags); } /* Need to wait a few seconds after link up to get diagnostic information from @@ -1798,7 +2022,7 @@ static void e1000_watchdog_task(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - struct e1000_desc_ring *txdr = &adapter->tx_ring; + struct e1000_tx_ring *txdr = &adapter->tx_ring[0]; uint32_t link; e1000_check_for_link(&adapter->hw); @@ -1857,8 +2081,8 @@ e1000_watchdog_task(struct e1000_adapter *adapter) e1000_update_adaptive(&adapter->hw); - if(!netif_carrier_ok(netdev)) { - if(E1000_DESC_UNUSED(txdr) + 1 < txdr->count) { + if (adapter->num_queues == 1 && !netif_carrier_ok(netdev)) { + if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) { /* We've lost link, so the controller stops DMA, * but we've got queued Tx work that's never going * to get done, so reset controller to flush Tx. @@ -1903,7 +2127,8 @@ e1000_watchdog_task(struct e1000_adapter *adapter) #define E1000_TX_FLAGS_VLAN_SHIFT 16 static inline int -e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) +e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, + struct sk_buff *skb) { #ifdef NETIF_F_TSO struct e1000_context_desc *context_desc; @@ -1954,8 +2179,8 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); - i = adapter->tx_ring.next_to_use; - context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i); + i = tx_ring->next_to_use; + context_desc = E1000_CONTEXT_DESC(*tx_ring, i); context_desc->lower_setup.ip_fields.ipcss = ipcss; context_desc->lower_setup.ip_fields.ipcso = ipcso; @@ -1967,8 +2192,8 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; context_desc->cmd_and_length = cpu_to_le32(cmd_length); - if(++i == adapter->tx_ring.count) i = 0; - adapter->tx_ring.next_to_use = i; + if (++i == tx_ring->count) i = 0; + tx_ring->next_to_use = i; return 1; } @@ -1978,7 +2203,8 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) } static inline boolean_t -e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) +e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, + struct sk_buff *skb) { struct e1000_context_desc *context_desc; unsigned int i; @@ -1987,8 +2213,8 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) if(likely(skb->ip_summed == CHECKSUM_HW)) { css = skb->h.raw - skb->data; - i = adapter->tx_ring.next_to_use; - context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i); + i = tx_ring->next_to_use; + context_desc = E1000_CONTEXT_DESC(*tx_ring, i); context_desc->upper_setup.tcp_fields.tucss = css; context_desc->upper_setup.tcp_fields.tucso = css + skb->csum; @@ -1996,8 +2222,8 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) context_desc->tcp_seg_setup.data = 0; context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT); - if(unlikely(++i == adapter->tx_ring.count)) i = 0; - adapter->tx_ring.next_to_use = i; + if (unlikely(++i == tx_ring->count)) i = 0; + tx_ring->next_to_use = i; return TRUE; } @@ -2009,11 +2235,10 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) #define E1000_MAX_DATA_PER_TXD (1<tx_ring; struct e1000_buffer *buffer_info; unsigned int len = skb->len; unsigned int offset = 0, size, count = 0, i; @@ -2109,9 +2334,9 @@ e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb, } static inline void -e1000_tx_queue(struct e1000_adapter *adapter, int count, int tx_flags) +e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, + int tx_flags, int count) { - struct e1000_desc_ring *tx_ring = &adapter->tx_ring; struct e1000_tx_desc *tx_desc = NULL; struct e1000_buffer *buffer_info; uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS; @@ -2157,7 +2382,7 @@ e1000_tx_queue(struct e1000_adapter *adapter, int count, int tx_flags) wmb(); tx_ring->next_to_use = i; - E1000_WRITE_REG(&adapter->hw, TDT, i); + writel(i, adapter->hw.hw_addr + tx_ring->tdt); } /** @@ -2250,6 +2475,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_tx_ring *tx_ring; unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD; unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; @@ -2262,7 +2488,8 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int f; len -= skb->data_len; - if(unlikely(skb->len <= 0)) { + tx_ring = adapter->tx_ring; + if (unlikely(skb->len <= 0)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -2306,12 +2533,6 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(adapter->pcix_82544) count += nr_frags; - local_irq_save(flags); - if (!spin_trylock(&adapter->tx_lock)) { - /* Collision - tell upper layer to requeue */ - local_irq_restore(flags); - return NETDEV_TX_LOCKED; - } #ifdef NETIF_F_TSO /* TSO Workaround for 82571/2 Controllers -- if skb->data * points to just header, pull a few bytes of payload from @@ -2336,12 +2557,18 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) ) e1000_transfer_dhcp_info(adapter, skb); + local_irq_save(flags); + if (!spin_trylock(&tx_ring->tx_lock)) { + /* Collision - tell upper layer to requeue */ + local_irq_restore(flags); + return NETDEV_TX_LOCKED; + } /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ - if(unlikely(E1000_DESC_UNUSED(&adapter->tx_ring) < count + 2)) { + if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 2)) { netif_stop_queue(netdev); - spin_unlock_irqrestore(&adapter->tx_lock, flags); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_BUSY; } @@ -2349,7 +2576,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(unlikely(e1000_82547_fifo_workaround(adapter, skb))) { netif_stop_queue(netdev); mod_timer(&adapter->tx_fifo_stall_timer, jiffies); - spin_unlock_irqrestore(&adapter->tx_lock, flags); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_BUSY; } } @@ -2359,37 +2586,37 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT); } - first = adapter->tx_ring.next_to_use; + first = tx_ring->next_to_use; - tso = e1000_tso(adapter, skb); + tso = e1000_tso(adapter, tx_ring, skb); if (tso < 0) { dev_kfree_skb_any(skb); - spin_unlock_irqrestore(&adapter->tx_lock, flags); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_OK; } if (likely(tso)) tx_flags |= E1000_TX_FLAGS_TSO; - else if(likely(e1000_tx_csum(adapter, skb))) + else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ - if(likely(skb->protocol == ntohs(ETH_P_IP))) + if (likely(skb->protocol == ntohs(ETH_P_IP))) tx_flags |= E1000_TX_FLAGS_IPV4; - e1000_tx_queue(adapter, - e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss), - tx_flags); + e1000_tx_queue(adapter, tx_ring, tx_flags, + e1000_tx_map(adapter, tx_ring, skb, first, + max_per_txd, nr_frags, mss)); netdev->trans_start = jiffies; /* Make sure there is space in the ring for the next send. */ - if(unlikely(E1000_DESC_UNUSED(&adapter->tx_ring) < MAX_SKB_FRAGS + 2)) + if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 2)) netif_stop_queue(netdev); - spin_unlock_irqrestore(&adapter->tx_lock, flags); + spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_OK; } @@ -2666,9 +2893,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t icr = E1000_READ_REG(hw, ICR); -#ifndef CONFIG_E1000_NAPI - unsigned int i; -#endif + int i; if(unlikely(!icr)) return IRQ_NONE; /* Not our interrupt */ @@ -2679,17 +2904,15 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) } #ifdef CONFIG_E1000_NAPI - if(likely(netif_rx_schedule_prep(netdev))) { - - /* Disable interrupts and register for poll. The flush - of the posted write is intentionally left out. - */ - - atomic_inc(&adapter->irq_sem); - E1000_WRITE_REG(hw, IMC, ~0); - __netif_rx_schedule(netdev); + atomic_inc(&adapter->irq_sem); + E1000_WRITE_REG(hw, IMC, ~0); + E1000_WRITE_FLUSH(hw); } #else + if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) + __netif_rx_schedule(&adapter->polling_netdev[0]); + else + e1000_irq_enable(adapter); /* Writing IMC and IMS is needed for 82547. Due to Hub Link bus being occupied, an interrupt de-assertion message is not able to be sent. @@ -2706,12 +2929,13 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) } for(i = 0; i < E1000_MAX_INTR; i++) - if(unlikely(!adapter->clean_rx(adapter) & - !e1000_clean_tx_irq(adapter))) + if(unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & + !e1000_clean_tx_irq(adapter, adapter->tx_ring))) break; if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) e1000_irq_enable(adapter); + #endif return IRQ_HANDLED; @@ -2724,22 +2948,37 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) **/ static int -e1000_clean(struct net_device *netdev, int *budget) +e1000_clean(struct net_device *poll_dev, int *budget) { - struct e1000_adapter *adapter = netdev_priv(netdev); - int work_to_do = min(*budget, netdev->quota); - int tx_cleaned; - int work_done = 0; + struct e1000_adapter *adapter; + int work_to_do = min(*budget, poll_dev->quota); + int tx_cleaned, i = 0, work_done = 0; + + /* Must NOT use netdev_priv macro here. */ + adapter = poll_dev->priv; + + /* Keep link state information with original netdev */ + if (!netif_carrier_ok(adapter->netdev)) + goto quit_polling; - tx_cleaned = e1000_clean_tx_irq(adapter); - adapter->clean_rx(adapter, &work_done, work_to_do); + while (poll_dev != &adapter->polling_netdev[i]) { + i++; + if (unlikely(i == adapter->num_queues)) + BUG(); + } + + tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[i]); + adapter->clean_rx(adapter, &adapter->rx_ring[i], + &work_done, work_to_do); *budget -= work_done; - netdev->quota -= work_done; + poll_dev->quota -= work_done; - if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) { /* If no Tx and not enough Rx work done, exit the polling mode */ - netif_rx_complete(netdev); + if((!tx_cleaned && (work_done == 0)) || + !netif_running(adapter->netdev)) { +quit_polling: + netif_rx_complete(poll_dev); e1000_irq_enable(adapter); return 0; } @@ -2754,9 +2993,9 @@ e1000_clean(struct net_device *netdev, int *budget) **/ static boolean_t -e1000_clean_tx_irq(struct e1000_adapter *adapter) +e1000_clean_tx_irq(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring) { - struct e1000_desc_ring *tx_ring = &adapter->tx_ring; struct net_device *netdev = adapter->netdev; struct e1000_tx_desc *tx_desc, *eop_desc; struct e1000_buffer *buffer_info; @@ -2767,12 +3006,12 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); - while(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { + while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { /* Premature writeback of Tx descriptors clear (free buffers * and unmap pci_mapping) previous_buffer_info */ - if (likely(adapter->previous_buffer_info.skb != NULL)) { + if (likely(tx_ring->previous_buffer_info.skb != NULL)) { e1000_unmap_and_free_tx_resource(adapter, - &adapter->previous_buffer_info); + &tx_ring->previous_buffer_info); } for(cleaned = FALSE; !cleaned; ) { @@ -2788,7 +3027,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) #ifdef NETIF_F_TSO } else { if (cleaned) { - memcpy(&adapter->previous_buffer_info, + memcpy(&tx_ring->previous_buffer_info, buffer_info, sizeof(struct e1000_buffer)); memset(buffer_info, 0, @@ -2806,6 +3045,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) if(unlikely(++i == tx_ring->count)) i = 0; } + + tx_ring->pkt++; eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); @@ -2813,15 +3054,15 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) tx_ring->next_to_clean = i; - spin_lock(&adapter->tx_lock); + spin_lock(&tx_ring->tx_lock); if(unlikely(cleaned && netif_queue_stopped(netdev) && netif_carrier_ok(netdev))) netif_wake_queue(netdev); - spin_unlock(&adapter->tx_lock); - if(adapter->detect_tx_hung) { + spin_unlock(&tx_ring->tx_lock); + if (adapter->detect_tx_hung) { /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = FALSE; @@ -2845,8 +3086,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) " next_to_watch <%x>\n" " jiffies <%lx>\n" " next_to_watch.status <%x>\n", - E1000_READ_REG(&adapter->hw, TDH), - E1000_READ_REG(&adapter->hw, TDT), + readl(adapter->hw.hw_addr + tx_ring->tdh), + readl(adapter->hw.hw_addr + tx_ring->tdt), tx_ring->next_to_use, i, (unsigned long long)tx_ring->buffer_info[i].dma, @@ -2858,12 +3099,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) } } #ifdef NETIF_F_TSO - - if( unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && - time_after(jiffies, adapter->previous_buffer_info.time_stamp + HZ))) + if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && + time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ))) e1000_unmap_and_free_tx_resource( - adapter, &adapter->previous_buffer_info); - + adapter, &tx_ring->previous_buffer_info); #endif return cleaned; } @@ -2926,13 +3165,14 @@ e1000_rx_checksum(struct e1000_adapter *adapter, static boolean_t #ifdef CONFIG_E1000_NAPI -e1000_clean_rx_irq(struct e1000_adapter *adapter, int *work_done, - int work_to_do) +e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do) #else -e1000_clean_rx_irq(struct e1000_adapter *adapter) +e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) #endif { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; struct e1000_rx_desc *rx_desc; @@ -3018,6 +3258,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) } #endif /* CONFIG_E1000_NAPI */ netdev->last_rx = jiffies; + rx_ring->pkt++; next_desc: rx_desc->status = 0; @@ -3027,7 +3268,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) rx_desc = E1000_RX_DESC(*rx_ring, i); } rx_ring->next_to_clean = i; - adapter->alloc_rx_buf(adapter); + adapter->alloc_rx_buf(adapter, rx_ring); return cleaned; } @@ -3039,13 +3280,14 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) static boolean_t #ifdef CONFIG_E1000_NAPI -e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done, - int work_to_do) +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do) #else -e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) #endif { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; union e1000_rx_desc_packet_split *rx_desc; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; @@ -3145,6 +3387,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) } #endif /* CONFIG_E1000_NAPI */ netdev->last_rx = jiffies; + rx_ring->pkt++; next_desc: rx_desc->wb.middle.status_error &= ~0xFF; @@ -3155,7 +3398,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) staterr = le32_to_cpu(rx_desc->wb.middle.status_error); } rx_ring->next_to_clean = i; - adapter->alloc_rx_buf(adapter); + adapter->alloc_rx_buf(adapter, rx_ring); return cleaned; } @@ -3166,9 +3409,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) **/ static void -e1000_alloc_rx_buffers(struct e1000_adapter *adapter) +e1000_alloc_rx_buffers(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; struct e1000_rx_desc *rx_desc; @@ -3252,7 +3495,7 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - E1000_WRITE_REG(&adapter->hw, RDT, i); + writel(i, adapter->hw.hw_addr + rx_ring->rdt); } if(unlikely(++i == rx_ring->count)) i = 0; @@ -3268,9 +3511,9 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) **/ static void -e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter) +e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring) { - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_rx_desc_packet_split *rx_desc; @@ -3338,7 +3581,7 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter) * descriptors are 32 bytes...so we increment tail * twice as much. */ - E1000_WRITE_REG(&adapter->hw, RDT, i<<1); + writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt); } if(unlikely(++i == rx_ring->count)) i = 0; diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 676247f9f1cc..38695d5b4637 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -306,7 +306,8 @@ e1000_check_options(struct e1000_adapter *adapter) .def = E1000_DEFAULT_TXD, .arg = { .r = { .min = E1000_MIN_TXD }} }; - struct e1000_desc_ring *tx_ring = &adapter->tx_ring; + struct e1000_tx_ring *tx_ring = adapter->tx_ring; + int i; e1000_mac_type mac_type = adapter->hw.mac_type; opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD; @@ -319,6 +320,8 @@ e1000_check_options(struct e1000_adapter *adapter) } else { tx_ring->count = opt.def; } + for (i = 0; i < adapter->num_queues; i++) + tx_ring[i].count = tx_ring->count; } { /* Receive Descriptor Count */ struct e1000_option opt = { @@ -329,7 +332,8 @@ e1000_check_options(struct e1000_adapter *adapter) .def = E1000_DEFAULT_RXD, .arg = { .r = { .min = E1000_MIN_RXD }} }; - struct e1000_desc_ring *rx_ring = &adapter->rx_ring; + struct e1000_rx_ring *rx_ring = adapter->rx_ring; + int i; e1000_mac_type mac_type = adapter->hw.mac_type; opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD; @@ -342,6 +346,8 @@ e1000_check_options(struct e1000_adapter *adapter) } else { rx_ring->count = opt.def; } + for (i = 0; i < adapter->num_queues; i++) + rx_ring[i].count = rx_ring->count; } { /* Checksum Offload Enable/Disable */ struct e1000_option opt = { -- GitLab From 24025e4ecf88743e1b3d46451b0e3f9de4bbcba5 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:03:23 -0400 Subject: [PATCH 0178/1519] e1000: implementation of the multi-queue feature Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 191 ++++++++++++++++++++++++++++++++- 1 file changed, 188 insertions(+), 3 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 5145b7345c22..ce1044a80bd2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -195,6 +195,11 @@ static int e1000_resume(struct pci_dev *pdev); static void e1000_netpoll (struct net_device *netdev); #endif +#ifdef CONFIG_E1000_MQ +/* for multiple Rx queues */ +void e1000_rx_schedule(void *data); +#endif + /* Exported from other modules */ extern void e1000_check_options(struct e1000_adapter *adapter); @@ -368,6 +373,9 @@ e1000_down(struct e1000_adapter *adapter) struct net_device *netdev = adapter->netdev; e1000_irq_disable(adapter); +#ifdef CONFIG_E1000_MQ + while (atomic_read(&adapter->rx_sched_call_data.count) != 0); +#endif free_irq(adapter->pdev->irq, netdev); #ifdef CONFIG_PCI_MSI if(adapter->hw.mac_type > e1000_82547_rev_2 && @@ -810,9 +818,19 @@ e1000_remove(struct pci_dev *pdev) if(!e1000_check_phy_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +#ifdef CONFIG_E1000_NAPI + kfree(adapter->polling_netdev); +#endif + iounmap(adapter->hw.hw_addr); pci_release_regions(pdev); +#ifdef CONFIG_E1000_MQ + free_percpu(adapter->cpu_netdev); + free_percpu(adapter->cpu_tx_ring); +#endif free_netdev(netdev); pci_disable_device(pdev); @@ -893,7 +911,21 @@ e1000_sw_init(struct e1000_adapter *adapter) hw->master_slave = E1000_MASTER_SLAVE; } +#ifdef CONFIG_E1000_MQ + /* Number of supported queues */ + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + adapter->num_queues = 2; + break; + default: + adapter->num_queues = 1; + break; + } + adapter->num_queues = min(adapter->num_queues, num_online_cpus()); +#else adapter->num_queues = 1; +#endif if (e1000_alloc_queues(adapter)) { DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n"); @@ -909,6 +941,11 @@ e1000_sw_init(struct e1000_adapter *adapter) set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state); } #endif + +#ifdef CONFIG_E1000_MQ + e1000_setup_queue_mapping(adapter); +#endif + atomic_set(&adapter->irq_sem, 1); spin_lock_init(&adapter->stats_lock); @@ -957,6 +994,39 @@ e1000_alloc_queues(struct e1000_adapter *adapter) return E1000_SUCCESS; } +#ifdef CONFIG_E1000_MQ +static void __devinit +e1000_setup_queue_mapping(struct e1000_adapter *adapter) +{ + int i, cpu; + + adapter->rx_sched_call_data.func = e1000_rx_schedule; + adapter->rx_sched_call_data.info = adapter->netdev; + cpus_clear(adapter->rx_sched_call_data.cpumask); + + adapter->cpu_netdev = alloc_percpu(struct net_device *); + adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *); + + lock_cpu_hotplug(); + i = 0; + for_each_online_cpu(cpu) { + *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues]; + /* This is incomplete because we'd like to assign separate + * physical cpus to these netdev polling structures and + * avoid saturating a subset of cpus. + */ + if (i < adapter->num_queues) { + *per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i]; + adapter->cpu_for_queue[i] = cpu; + } else + *per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL; + + i++; + } + unlock_cpu_hotplug(); +} +#endif + /** * e1000_open - Called when a network interface is made active * @netdev: network interface device structure @@ -1178,8 +1248,21 @@ e1000_configure_tx(struct e1000_adapter *adapter) /* Setup the HW Tx Head and Tail descriptor pointers */ - E1000_WRITE_REG(&adapter->hw, TDH, 0); - E1000_WRITE_REG(&adapter->hw, TDT, 0); + switch (adapter->num_queues) { + case 2: + tdba = adapter->tx_ring[1].dma; + tdlen = adapter->tx_ring[1].count * + sizeof(struct e1000_tx_desc); + E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, TDBAH1, (tdba >> 32)); + E1000_WRITE_REG(hw, TDLEN1, tdlen); + E1000_WRITE_REG(hw, TDH1, 0); + E1000_WRITE_REG(hw, TDT1, 0); + adapter->tx_ring[1].tdh = E1000_TDH1; + adapter->tx_ring[1].tdt = E1000_TDT1; + /* Fall Through */ + case 1: + default: tdba = adapter->tx_ring[0].dma; tdlen = adapter->tx_ring[0].count * sizeof(struct e1000_tx_desc); @@ -1190,6 +1273,8 @@ e1000_configure_tx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, TDT, 0); adapter->tx_ring[0].tdh = E1000_TDH; adapter->tx_ring[0].tdt = E1000_TDT; + break; + } /* Set the default values for the Tx Inter Packet Gap timer */ @@ -1222,7 +1307,7 @@ e1000_configure_tx(struct e1000_adapter *adapter) tctl = E1000_READ_REG(hw, TCTL); tctl &= ~E1000_TCTL_CT; - tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | + tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); E1000_WRITE_REG(hw, TCTL, tctl); @@ -1518,6 +1603,21 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ + switch (adapter->num_queues) { +#ifdef CONFIG_E1000_MQ + case 2: + rdba = adapter->rx_ring[1].dma; + E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL)); + E1000_WRITE_REG(hw, RDBAH1, (rdba >> 32)); + E1000_WRITE_REG(hw, RDLEN1, rdlen); + E1000_WRITE_REG(hw, RDH1, 0); + E1000_WRITE_REG(hw, RDT1, 0); + adapter->rx_ring[1].rdh = E1000_RDH1; + adapter->rx_ring[1].rdt = E1000_RDT1; + /* Fall Through */ +#endif + case 1: + default: rdba = adapter->rx_ring[0].dma; E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL)); E1000_WRITE_REG(hw, RDBAH, (rdba >> 32)); @@ -1527,6 +1627,47 @@ e1000_configure_rx(struct e1000_adapter *adapter) adapter->rx_ring[0].rdh = E1000_RDH; adapter->rx_ring[0].rdt = E1000_RDT; break; + } + +#ifdef CONFIG_E1000_MQ + if (adapter->num_queues > 1) { + uint32_t random[10]; + + get_random_bytes(&random[0], 40); + + if (hw->mac_type <= e1000_82572) { + E1000_WRITE_REG(hw, RSSIR, 0); + E1000_WRITE_REG(hw, RSSIM, 0); + } + + switch (adapter->num_queues) { + case 2: + default: + reta = 0x00800080; + mrqc = E1000_MRQC_ENABLE_RSS_2Q; + break; + } + + /* Fill out redirection table */ + for (i = 0; i < 32; i++) + E1000_WRITE_REG_ARRAY(hw, RETA, i, reta); + /* Fill out hash function seeds */ + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]); + + mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP); + E1000_WRITE_REG(hw, MRQC, mrqc); + } + + /* Multiqueue and packet checksumming are mutually exclusive. */ + if (hw->mac_type >= e1000_82571) { + rxcsum = E1000_READ_REG(hw, RXCSUM); + rxcsum |= E1000_RXCSUM_PCSD; + E1000_WRITE_REG(hw, RXCSUM, rxcsum); + } + +#else /* Enable 82543 Receive Checksum Offload for TCP and UDP */ if (hw->mac_type >= e1000_82543) { @@ -1546,6 +1687,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) } E1000_WRITE_REG(hw, RXCSUM, rxcsum); } +#endif /* CONFIG_E1000_MQ */ if (hw->mac_type == e1000_82573) E1000_WRITE_REG(hw, ERT, 0x0100); @@ -2488,7 +2630,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int f; len -= skb->data_len; +#ifdef CONFIG_E1000_MQ + tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id()); +#else tx_ring = adapter->tx_ring; +#endif + if (unlikely(skb->len <= 0)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -2879,6 +3026,29 @@ e1000_update_stats(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } +#ifdef CONFIG_E1000_MQ +void +e1000_rx_schedule(void *data) +{ + struct net_device *poll_dev, *netdev = data; + struct e1000_adapter *adapter = netdev->priv; + int this_cpu = get_cpu(); + + poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu); + if (poll_dev == NULL) { + put_cpu(); + return; + } + + if (likely(netif_rx_schedule_prep(poll_dev))) + __netif_rx_schedule(poll_dev); + else + e1000_irq_enable(adapter); + + put_cpu(); +} +#endif + /** * e1000_intr - Interrupt Handler * @irq: interrupt number @@ -2907,12 +3077,27 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) atomic_inc(&adapter->irq_sem); E1000_WRITE_REG(hw, IMC, ~0); E1000_WRITE_FLUSH(hw); +#ifdef CONFIG_E1000_MQ + if (atomic_read(&adapter->rx_sched_call_data.count) == 0) { + cpu_set(adapter->cpu_for_queue[0], + adapter->rx_sched_call_data.cpumask); + for (i = 1; i < adapter->num_queues; i++) { + cpu_set(adapter->cpu_for_queue[i], + adapter->rx_sched_call_data.cpumask); + atomic_inc(&adapter->irq_sem); + } + atomic_set(&adapter->rx_sched_call_data.count, i); + smp_call_async_mask(&adapter->rx_sched_call_data); + } else { + printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count)); } #else if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) __netif_rx_schedule(&adapter->polling_netdev[0]); else e1000_irq_enable(adapter); +#endif +#else /* Writing IMC and IMS is needed for 82547. Due to Hub Link bus being occupied, an interrupt de-assertion message is not able to be sent. -- GitLab From 2ae76d98fb9f0a9226dd62cf0a0b7547507d2862 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:04:22 -0400 Subject: [PATCH 0179/1519] e1000: Enable custom configuration bits for 82571/2 controllers Enable custom configuration bits for 82571/2 controllers. The bits are required for correct functionality of these controllers. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ce1044a80bd2..ad92115f20a0 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1151,6 +1151,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, return -ENOMEM; } memset(txdr->buffer_info, 0, size); + memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer)); /* round up to nearest 4K */ @@ -1199,6 +1200,7 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, txdr->next_to_use = 0; txdr->next_to_clean = 0; + spin_lock_init(&txdr->tx_lock); return 0; } @@ -1312,6 +1314,19 @@ e1000_configure_tx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, TCTL, tctl); + if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) { + tarc = E1000_READ_REG(hw, TARC0); + tarc |= ((1 << 25) | (1 << 21)); + E1000_WRITE_REG(hw, TARC0, tarc); + tarc = E1000_READ_REG(hw, TARC1); + tarc |= (1 << 25); + if (tctl & E1000_TCTL_MULR) + tarc &= ~(1 << 28); + else + tarc |= (1 << 28); + E1000_WRITE_REG(hw, TARC1, tarc); + } + e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ @@ -1601,6 +1616,14 @@ e1000_configure_rx(struct e1000_adapter *adapter) 1000000000 / (adapter->itr * 256)); } + if (hw->mac_type >= e1000_82571) { + /* Reset delay timers after every interrupt */ + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_CANC; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + } + /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ switch (adapter->num_queues) { -- GitLab From e4c811c9d2f2728ce15440c99b3b44b72799b43f Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:05:44 -0400 Subject: [PATCH 0180/1519] e1000: Fixes for packet split related issues Fixes for packet split related issues * On platforms where PAGE_SIZE > 4K, driver will use only required number of pages compared to always using 3 pages. * Packet split won't be used if the PAGE_SIZE is > 16K * Adds a statistics counter to splits. * Setting the non Null ptr to zero sized buffers to solve packet split receive descriptor error * When the no of pages needed is calculated, the header buffer is not included for a given MTU. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000.h | 7 +-- drivers/net/e1000/e1000_ethtool.c | 3 +- drivers/net/e1000/e1000_main.c | 88 +++++++++++++++++++------------ 3 files changed, 60 insertions(+), 38 deletions(-) diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 9b7274b111f3..3f653a93e1bc 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -169,8 +169,8 @@ struct e1000_buffer { uint16_t next_to_watch; }; -struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; }; -struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; }; +struct e1000_ps_page { struct page *ps_page[PS_PAGE_BUFFERS]; }; +struct e1000_ps_page_dma { uint64_t ps_page_dma[PS_PAGE_BUFFERS]; }; struct e1000_tx_ring { /* pointer to the descriptor ring memory */ @@ -300,10 +300,11 @@ struct e1000_adapter { uint64_t hw_csum_err; uint64_t hw_csum_good; + uint64_t rx_hdr_split; uint32_t rx_int_delay; uint32_t rx_abs_int_delay; boolean_t rx_csum; - boolean_t rx_ps; + unsigned int rx_ps_pages; uint32_t gorcl; uint64_t gorcl_old; uint16_t rx_ps_bsize0; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6e7e34f59a34..183b583df1d7 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -91,7 +91,8 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) }, { "rx_long_byte_count", E1000_STAT(stats.gorcl) }, { "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, - { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) } + { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, + { "rx_header_split", E1000_STAT(rx_hdr_split) }, }; #define E1000_STATS_LEN \ sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ad92115f20a0..090229f7a95c 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1484,12 +1484,16 @@ e1000_setup_all_rx_resources(struct e1000_adapter *adapter) * e1000_setup_rctl - configure the receive control registers * @adapter: Board private structure **/ - +#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ + (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) static void e1000_setup_rctl(struct e1000_adapter *adapter) { uint32_t rctl, rfctl; uint32_t psrctl = 0; +#ifdef CONFIG_E1000_PACKET_SPLIT + uint32_t pages = 0; +#endif rctl = E1000_READ_REG(&adapter->hw, RCTL); @@ -1543,11 +1547,14 @@ e1000_setup_rctl(struct e1000_adapter *adapter) * followed by the page buffers. Therefore, skb->data is * sized to hold the largest protocol header. */ - adapter->rx_ps = (adapter->hw.mac_type > e1000_82547_rev_2) - && (adapter->netdev->mtu - < ((3 * PAGE_SIZE) + adapter->rx_ps_bsize0)); + pages = PAGE_USE_COUNT(adapter->netdev->mtu); + if ((adapter->hw.mac_type > e1000_82547_rev_2) && (pages <= 3) && + PAGE_SIZE <= 16384) + adapter->rx_ps_pages = pages; + else + adapter->rx_ps_pages = 0; #endif - if(adapter->rx_ps) { + if (adapter->rx_ps_pages) { /* Configure extra packet-split registers */ rfctl = E1000_READ_REG(&adapter->hw, RFCTL); rfctl |= E1000_RFCTL_EXTEN; @@ -1559,12 +1566,19 @@ e1000_setup_rctl(struct e1000_adapter *adapter) psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT; - psrctl |= PAGE_SIZE >> - E1000_PSRCTL_BSIZE1_SHIFT; - psrctl |= PAGE_SIZE << - E1000_PSRCTL_BSIZE2_SHIFT; - psrctl |= PAGE_SIZE << - E1000_PSRCTL_BSIZE3_SHIFT; + + switch (adapter->rx_ps_pages) { + case 3: + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE3_SHIFT; + case 2: + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE2_SHIFT; + case 1: + psrctl |= PAGE_SIZE >> + E1000_PSRCTL_BSIZE1_SHIFT; + break; + } E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl); } @@ -1590,7 +1604,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) int i; #endif - if(adapter->rx_ps) { + if (adapter->rx_ps_pages) { rdlen = adapter->rx_ring[0].count * sizeof(union e1000_rx_desc_packet_split); adapter->clean_rx = e1000_clean_rx_irq_ps; @@ -1700,8 +1714,8 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Enable 82571 IPv4 payload checksum for UDP fragments * Must be used in conjunction with packet-split. */ - if((adapter->hw.mac_type > e1000_82547_rev_2) && - (adapter->rx_ps)) { + if ((hw->mac_type >= e1000_82571) && + (adapter->rx_ps_pages)) { rxcsum |= E1000_RXCSUM_IPPCSE; } } else { @@ -1906,7 +1920,7 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter, dev_kfree_skb(buffer_info->skb); buffer_info->skb = NULL; - for(j = 0; j < PS_PAGE_BUFFERS; j++) { + for(j = 0; j < adapter->rx_ps_pages; j++) { if(!ps_page->ps_page[j]) break; pci_unmap_single(pdev, ps_page_dma->ps_page_dma[j], @@ -3551,7 +3565,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, /* Good Receive */ skb_put(skb, length); - for(j = 0; j < PS_PAGE_BUFFERS; j++) { + for(j = 0; j < adapter->rx_ps_pages; j++) { if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j]))) break; @@ -3572,11 +3586,13 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); skb->protocol = eth_type_trans(skb, netdev); -#ifdef HAVE_RX_ZERO_COPY if(likely(rx_desc->wb.upper.header_status & - E1000_RXDPS_HDRSTAT_HDRSP)) + E1000_RXDPS_HDRSTAT_HDRSP)) { + adapter->rx_hdr_split++; +#ifdef HAVE_RX_ZERO_COPY skb_shinfo(skb)->zero_copy = TRUE; #endif + } #ifdef CONFIG_E1000_NAPI if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, @@ -3740,22 +3756,26 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, rx_desc = E1000_RX_DESC_PS(*rx_ring, i); for(j = 0; j < PS_PAGE_BUFFERS; j++) { - if(unlikely(!ps_page->ps_page[j])) { - ps_page->ps_page[j] = - alloc_page(GFP_ATOMIC); - if(unlikely(!ps_page->ps_page[j])) - goto no_buffers; - ps_page_dma->ps_page_dma[j] = - pci_map_page(pdev, - ps_page->ps_page[j], - 0, PAGE_SIZE, - PCI_DMA_FROMDEVICE); - } - /* Refresh the desc even if buffer_addrs didn't - * change because each write-back erases this info. - */ - rx_desc->read.buffer_addr[j+1] = - cpu_to_le64(ps_page_dma->ps_page_dma[j]); + if (j < adapter->rx_ps_pages) { + if (likely(!ps_page->ps_page[j])) { + ps_page->ps_page[j] = + alloc_page(GFP_ATOMIC); + if (unlikely(!ps_page->ps_page[j])) + goto no_buffers; + ps_page_dma->ps_page_dma[j] = + pci_map_page(pdev, + ps_page->ps_page[j], + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + } + /* Refresh the desc even if buffer_addrs didn't + * change because each write-back erases + * this info. + */ + rx_desc->read.buffer_addr[j+1] = + cpu_to_le64(ps_page_dma->ps_page_dma[j]); + } else + rx_desc->read.buffer_addr[j+1] = ~0; } skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN); -- GitLab From 352c9f854cb197581d7135d1276742fd76b53c25 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:07:24 -0400 Subject: [PATCH 0181/1519] e1000: Added msleep_interruptible delay added msleep_interruptible delay right before returning from diag_test to allow the phy to recover from reset Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 183b583df1d7..ee66947e5043 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1544,6 +1544,7 @@ e1000_diag_test(struct net_device *netdev, data[2] = 0; data[3] = 0; } + msleep_interruptible(4 * 1000); } static void -- GitLab From a7990ba60adc46a808c737443393fdfecdc82593 Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 07:08:19 -0400 Subject: [PATCH 0182/1519] e1000: Flush shadow RAM Flush shadow RAM to save updates to ASF related bits for 82573 controllers. These bits are past the first 63 words of NVM. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 6 ++++-- drivers/net/e1000/e1000_hw.c | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index ee66947e5043..6b9acc7f94a3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -547,8 +547,10 @@ e1000_set_eeprom(struct net_device *netdev, ret_val = e1000_write_eeprom(hw, first_word, last_word - first_word + 1, eeprom_buff); - /* Update the checksum over the first part of the EEPROM if needed */ - if((ret_val == 0) && first_word <= EEPROM_CHECKSUM_REG) + /* Update the checksum over the first part of the EEPROM if needed + * and flush shadow RAM for 82573 conrollers */ + if((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) || + (hw->mac_type == e1000_82573))) e1000_update_eeprom_checksum(hw); kfree(eeprom_buff); diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 7d627dd89a3d..8fc876da43b4 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -717,6 +717,7 @@ e1000_init_hw(struct e1000_hw *hw) default: break; case e1000_82571: + case e1000_82572: ctrl = E1000_READ_REG(hw, TXDCTL1); ctrl &= ~E1000_TXDCTL_WTHRESH; ctrl |= E1000_TXDCTL_COUNT_DESC | E1000_TXDCTL_FULL_TX_DESC_WB; -- GitLab From be2b28ed3bb3dd3952e10fb72623b23c5d8b4795 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 4 Oct 2005 07:13:43 -0400 Subject: [PATCH 0183/1519] e1000: fix warnings --- drivers/net/e1000/e1000_main.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 090229f7a95c..dd79449f9a99 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -777,12 +777,12 @@ e1000_remove(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t ctrl_ext; uint32_t manc, swsm; - - flush_scheduled_work(); #ifdef CONFIG_E1000_NAPI int i; #endif + flush_scheduled_work(); + if(adapter->hw.mac_type >= e1000_82540 && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); @@ -3100,7 +3100,9 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t icr = E1000_READ_REG(hw, ICR); +#ifdef CONFIG_E1000_MQ int i; +#endif if(unlikely(!icr)) return IRQ_NONE; /* Not our interrupt */ @@ -3128,13 +3130,14 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) } else { printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count)); } -#else +#else /* if !CONFIG_E1000_MQ */ if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0]))) __netif_rx_schedule(&adapter->polling_netdev[0]); else e1000_irq_enable(adapter); -#endif -#else +#endif /* CONFIG_E1000_MQ */ + +#else /* if !CONFIG_E1000_NAPI */ /* Writing IMC and IMS is needed for 82547. Due to Hub Link bus being occupied, an interrupt de-assertion message is not able to be sent. @@ -3158,7 +3161,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) e1000_irq_enable(adapter); -#endif +#endif /* CONFIG_E1000_NAPI */ return IRQ_HANDLED; } -- GitLab From 96eb549c0c20cf63ca13fac71d9d406701f744a6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 4 Oct 2005 12:20:24 +0100 Subject: [PATCH 0184/1519] [PATCH] AX.25: Delete debug printk from mkiss driver Signed-off-by: Ralf Baechle DL5RB -- drivers/net/hamradio/mkiss.c | 1 - 1 files changed, 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index d9fe64b46f4b..793ae12a2571 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -765,7 +765,6 @@ static int mkiss_ioctl(struct tty_struct *tty, struct file *file, case SIOCSIFHWADDR: { char addr[AX25_ADDR_LEN]; -printk(KERN_INFO "In SIOCSIFHWADDR"); if (copy_from_user(&addr, (void __user *) arg, AX25_ADDR_LEN)) { -- GitLab From d5919586265d36c6694a5d10ba589c02806873b6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 4 Oct 2005 12:22:16 +0100 Subject: [PATCH 0185/1519] [PATCH] AX.25: Convert mkiss.c to DEFINE_RWLOCK Signed-off-by: Ingo Molnar Signed-off-by: Ralf Baechle DL5RB drivers/net/hamradio/mkiss.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 793ae12a2571..331a75c8aee2 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -622,7 +622,7 @@ static void ax_setup(struct net_device *dev) * best way to fix this is to use a rwlock in the tty struct, but for now we * use a single global rwlock for all ttys in ppp line discipline. */ -static rwlock_t disc_data_lock = RW_LOCK_UNLOCKED; +static DEFINE_RWLOCK(disc_data_lock); static struct mkiss *mkiss_get(struct tty_struct *tty) { -- GitLab From 53232803241ae0f26b39897a4d4b37775837de00 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Tue, 4 Oct 2005 07:46:21 -0400 Subject: [PATCH 0186/1519] airo: fix resume Cisco Aironet doesn't resume properly from swsusp, because the resume method confuses a PM_EVENT_* for a PCI power state. It thinks that it is resuming from PCI_D1 and doesn't do the necessary initialization of the card. Signed-off-by: Michal Schmidt --- drivers/net/wireless/airo.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 746456c34df8..cb429e783749 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -5504,12 +5504,13 @@ static int airo_pci_resume(struct pci_dev *pdev) struct net_device *dev = pci_get_drvdata(pdev); struct airo_info *ai = dev->priv; Resp rsp; + pci_power_t prev_state = pdev->current_state; - pci_set_power_state(pdev, 0); + pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - pci_enable_wake(pdev, pci_choose_state(pdev, ai->power), 0); + pci_enable_wake(pdev, PCI_D0, 0); - if (ai->power.event > 1) { + if (prev_state != PCI_D1) { reset_card(dev, 0); mpi_init_descriptors(ai); setup_card(ai, dev->dev_addr, 0); -- GitLab From dbc2309d90b59fbb2676dc2e39150aa095e8c222 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Sep 2005 17:50:51 -0400 Subject: [PATCH 0187/1519] [PATCH] s2io: change strncpy length arg to use size of target Use the size of the target array for the length argument to strncpy instead of the size of the source or a magic number. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 4b9f1828845e..eff747cf3113 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -4177,11 +4177,10 @@ static void s2io_ethtool_gdrvinfo(struct net_device *dev, { nic_t *sp = dev->priv; - strncpy(info->driver, s2io_driver_name, sizeof(s2io_driver_name)); - strncpy(info->version, s2io_driver_version, - sizeof(s2io_driver_version)); - strncpy(info->fw_version, "", 32); - strncpy(info->bus_info, pci_name(sp->pdev), 32); + strncpy(info->driver, s2io_driver_name, sizeof(info->driver)); + strncpy(info->version, s2io_driver_version, sizeof(info->version)); + strncpy(info->fw_version, "", sizeof(info->fw_version)); + strncpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info)); info->regdump_len = XENA_REG_SPACE; info->eedump_len = XENA_EEPROM_SPACE; info->testinfo_len = S2IO_TEST_LEN; -- GitLab From 6c1792f4e8cf2ca03a8dd5ec4b162b9219e9268a Mon Sep 17 00:00:00 2001 From: John Linville Date: Tue, 4 Oct 2005 07:51:45 -0400 Subject: [PATCH 0188/1519] [netdrvr s2io] Add a MODULE_VERSION entry --- drivers/net/s2io.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index eff747cf3113..fcf61107046e 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -65,9 +65,11 @@ #include "s2io.h" #include "s2io-regs.h" +#define DRV_VERSION "Version 2.0.9.1" + /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -static char s2io_driver_version[] = "Version 2.0.9.1"; +static char s2io_driver_version[] = DRV_VERSION; static inline int RXD_IS_UP2DT(RxD_t *rxdp) { @@ -5635,6 +5637,8 @@ static void s2io_init_pci(nic_t * sp) MODULE_AUTHOR("Raghavendra Koushik "); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + module_param(tx_fifo_num, int, 0); module_param(rx_ring_num, int, 0); module_param_array(tx_fifo_len, uint, NULL, 0); @@ -6013,7 +6017,7 @@ Defaulting to INTA\n"); if (sp->device_type & XFRAME_II_DEVICE) { DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ", dev->name); - DBG_PRINT(ERR_DBG, "(rev %d), %s", + DBG_PRINT(ERR_DBG, "(rev %d), Version %s", get_xena_rev_id(sp->pdev), s2io_driver_version); #ifdef CONFIG_2BUFF_MODE @@ -6048,7 +6052,7 @@ Defaulting to INTA\n"); } else { DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ", dev->name); - DBG_PRINT(ERR_DBG, "(rev %d), %s", + DBG_PRINT(ERR_DBG, "(rev %d), Version %s", get_xena_rev_id(sp->pdev), s2io_driver_version); #ifdef CONFIG_2BUFF_MODE -- GitLab From 075897ce3b1027fccb98f36dd1f18c07f5c374ef Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Sep 2005 17:50:53 -0400 Subject: [PATCH 0189/1519] [PATCH] bonding: replicate IGMP traffic in activebackup mode Replicate IGMP frames across all slaves in activebackup mode. This ensures fail-over is rapid for multicast traffic as well. Otherwise, multicast traffic will be lost until the next IGMP membership report poll timeout. This is conceptually similar to the treatment of IGMP traffic in bond_alb_xmit. In that case, IGMP traffic transmitted on any slave is re-routed to the active slave in order to ensure that multicast traffic continues to be directed to the active receiver. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_main.c | 53 +++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index fd62e43a3510..2c9e63a14596 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4240,6 +4240,39 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev return 0; } +static void bond_activebackup_xmit_copy(struct sk_buff *skb, + struct bonding *bond, + struct slave *slave) +{ + struct sk_buff *skb2 = skb_copy(skb, GFP_ATOMIC); + struct ethhdr *eth_data; + u8 *hwaddr; + int res; + + if (!skb2) { + printk(KERN_ERR DRV_NAME ": Error: " + "bond_activebackup_xmit_copy(): skb_copy() failed\n"); + return; + } + + skb2->mac.raw = (unsigned char *)skb2->data; + eth_data = eth_hdr(skb2); + + /* Pick an appropriate source MAC address */ + hwaddr = slave->perm_hwaddr; + if (!memcmp(eth_data->h_source, hwaddr, ETH_ALEN)) + hwaddr = bond->curr_active_slave->perm_hwaddr; + + /* Set source MAC address appropriately */ + memcpy(eth_data->h_source, hwaddr, ETH_ALEN); + + res = bond_dev_queue_xmit(bond, skb2, slave->dev); + if (res) + dev_kfree_skb(skb2); + + return; +} + /* * in active-backup mode, we know that bond->curr_active_slave is always valid if * the bond has a usable interface. @@ -4256,10 +4289,26 @@ static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_d goto out; } - if (bond->curr_active_slave) { /* one usable interface */ - res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev); + if (!bond->curr_active_slave) + goto out; + + /* Xmit IGMP frames on all slaves to ensure rapid fail-over + for multicast traffic on snooping switches */ + if (skb->protocol == __constant_htons(ETH_P_IP) && + skb->nh.iph->protocol == IPPROTO_IGMP) { + struct slave *slave, *active_slave; + int i; + + active_slave = bond->curr_active_slave; + bond_for_each_slave_from_to(bond, slave, i, active_slave->next, + active_slave->prev) + if (IS_UP(slave->dev) && + (slave->link == BOND_LINK_UP)) + bond_activebackup_xmit_copy(skb, bond, slave); } + res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev); + out: if (res) { /* no suitable interface, frame not sent */ -- GitLab From 47a8659380d40d5c0786ddb62a89b3f7f1392430 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 4 Oct 2005 08:09:19 -0400 Subject: [PATCH 0190/1519] libata: bitmask based pci init functions for one or two ports This redoes the n_ports logic I proposed before as a bitmask. ata_pci_init_native_mode is now used with a mask allowing for mixed mode stuff later on. ata_pci_init_legacy_port is called with port number and does one port now not two. Instead it is called twice by the ata init logic which cleans both of them up. There are stil limits in the original code left over - IRQ/port mapping for legacy mode should be arch specific values - You can have one legacy mode IDE adapter per PCI root bridge on some systems - Doesn't handle mixed mode devices yet (but is now a lot closer to it) --- drivers/scsi/libata-core.c | 133 +++++++++++++++++++++---------------- drivers/scsi/sata_nv.c | 2 +- drivers/scsi/sata_sis.c | 2 +- drivers/scsi/sata_uli.c | 2 +- drivers/scsi/sata_via.c | 2 +- include/linux/libata.h | 6 +- 6 files changed, 85 insertions(+), 62 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 03d422e99e58..82ec7f30bf3f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4363,85 +4363,87 @@ void ata_pci_host_stop (struct ata_host_set *host_set) * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present * * Utility function which allocates and initializes an * ata_probe_ent structure for a standard dual-port * PIO-based IDE controller. The returned ata_probe_ent * structure can be passed to ata_device_add(). The returned * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. */ struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) { struct ata_probe_ent *probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + if (!probe_ent) return NULL; - probe_ent->n_ports = 2; probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; - probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[1].altstatus_addr = - probe_ent->port[1].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8; + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); + ata_std_ports(&probe_ent->port[p]); + p++; + } - ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent->port[1]); + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; + ata_std_ports(&probe_ent->port[p]); + p++; + } + probe_ent->n_ports = p; return probe_ent; } -static struct ata_probe_ent * -ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, - struct ata_probe_ent **ppe2) +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num) { - struct ata_probe_ent *probe_ent, *probe_ent2; + struct ata_probe_ent *probe_ent; probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); if (!probe_ent) return NULL; - probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]); - if (!probe_ent2) { - kfree(probe_ent); - return NULL; - } - - probe_ent->n_ports = 1; - probe_ent->irq = 14; - probe_ent->hard_port_no = 0; + probe_ent->legacy_mode = 1; - - probe_ent2->n_ports = 1; - probe_ent2->irq = 15; - - probe_ent2->hard_port_no = 1; - probe_ent2->legacy_mode = 1; - - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent2->port[0].cmd_addr = 0x170; - probe_ent2->port[0].altstatus_addr = - probe_ent2->port[0].ctl_addr = 0x376; - probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8; - + probe_ent->n_ports = 1; + probe_ent->hard_port_no = port_num; + + switch(port_num) + { + case 0: + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = 0x1f0; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x3f6; + break; + case 1: + probe_ent->irq = 15; + probe_ent->port[0].cmd_addr = 0x170; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x376; + break; + } + probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num; ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent2->port[0]); - - *ppe2 = probe_ent2; return probe_ent; } @@ -4470,7 +4472,7 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports) { - struct ata_probe_ent *probe_ent, *probe_ent2 = NULL; + struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; struct ata_port_info *port[2]; u8 tmp8, mask; unsigned int legacy_mode = 0; @@ -4487,7 +4489,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: support transitioning to native mode? */ + /* TODO: What if one channel is in native mode ... */ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); mask = (1 << 2) | (1 << 0); if ((tmp8 & mask) != mask) @@ -4495,11 +4497,20 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } /* FIXME... */ - if ((!legacy_mode) && (n_ports > 1)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n"); - return -EINVAL; + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ } + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + rc = pci_enable_device(pdev); if (rc) return rc; @@ -4510,6 +4521,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; } + /* FIXME: Should use platform specific mappers for legacy port ranges */ if (legacy_mode) { if (!request_region(0x1f0, 8, "libata")) { struct resource *conflict, res; @@ -4554,10 +4566,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out_regions; if (legacy_mode) { - probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2); - } else - probe_ent = ata_pci_init_native_mode(pdev, port); - if (!probe_ent) { + if (legacy_mode & (1 << 0)) + probe_ent = ata_pci_init_legacy_port(pdev, port, 0); + if (legacy_mode & (1 << 1)) + probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent && !probe_ent2) { rc = -ENOMEM; goto err_out_regions; } diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index c05653c7779d..749ff92d8c63 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -405,7 +405,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = -ENOMEM; ppi = &nv_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) goto err_out_regions; diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index b227e51d12f4..0761a3234fcf 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -263,7 +263,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_regions; ppi = &sis_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 4c9fb8b71be1..9c06f2abe7f7 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -202,7 +202,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_regions; ppi = &uli_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 128b996b07b7..565872479b9a 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -212,7 +212,7 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) struct ata_probe_ent *probe_ent; struct ata_port_info *ppi = &svia_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; diff --git a/include/linux/libata.h b/include/linux/libata.h index 4739a75b983d..4d45179872cc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -155,6 +155,10 @@ enum { ATA_SHIFT_UDMA = 0, ATA_SHIFT_MWDMA = 8, ATA_SHIFT_PIO = 11, + + /* Masks for port functions */ + ATA_PORT_PRIMARY = (1 << 0), + ATA_PORT_SECONDARY = (1 << 1), }; enum hsm_task_states { @@ -458,7 +462,7 @@ struct pci_bits { extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port); +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); #endif /* CONFIG_PCI */ -- GitLab From e2608361be343e6220e0a87e04ff224eb037df31 Mon Sep 17 00:00:00 2001 From: Mateusz Berezecki Date: Tue, 4 Oct 2005 08:14:00 -0400 Subject: [PATCH 0191/1519] [wireless ipw2200] remove redundant return statement --- drivers/net/wireless/ipw2200.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 7ea9bd58f65f..de4e6c23e4b8 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -5318,8 +5318,6 @@ static int ipw_wx_set_freq(struct net_device *dev, IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m); return ipw_set_channel(priv, (u8) fwrq->m); - - return 0; } static int ipw_wx_get_freq(struct net_device *dev, -- GitLab From c187c4b58a9caff660a4c8ae39d0def88cc449af Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:46:51 -0400 Subject: [PATCH 0192/1519] libata: minor whitespace, comment, debug message updates --- drivers/scsi/libata-scsi.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 03b7a6dd95fe..d67c3fc98f7b 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -589,7 +589,8 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) head = track % dev->heads; sect = (u32)block % dev->sectors + 1; - DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", (u32)block, track, cyl, head, sect); + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); /* Check whether the converted CHS can fit. Cylinder: 0-65535 @@ -665,6 +666,10 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) block |= ((u64)scsicmd[3]); n_block |= ((u32)scsicmd[4]); + + /* for 6-byte r/w commands, transfer length 0 + * means 256 blocks of data, not 0 block. + */ if (!n_block) n_block = 256; @@ -692,7 +697,11 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* Check and compose ATA command */ if (!n_block) - /* In ATA, sector count 0 means 256 or 65536 sectors, not 0 sectors. */ + /* For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + */ return 1; if (lba) { @@ -715,7 +724,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->device |= (block >> 24) & 0xf; } - + qc->nsect = n_block; tf->nsect = n_block & 0xff; @@ -731,23 +740,23 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for CHS addressing. */ if ((block >> 28) || (n_block > 256)) return 1; - + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; head = track % dev->heads; sect = (u32)block % dev->sectors + 1; - DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", + DPRINTK("block %u track %u cyl %u head %u sect %u\n", (u32)block, track, cyl, head, sect); - + /* Check whether the converted CHS can fit. Cylinder: 0-65535 Head: 0-15 Sector: 1-255*/ - if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) return 1; - + qc->nsect = n_block; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ tf->lbal = sect; -- GitLab From 3aef52311bcb1f88aa5c786302f1ae14a787f61e Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:47:43 -0400 Subject: [PATCH 0193/1519] [libata scsi] tidy up SCSI lba and xfer len calculations move the redundant SCSI lba and transfer length calculation code from ata_scsi_verify_xlat() and ata_scsi_rw_xlat() to common functions. --- drivers/scsi/libata-scsi.c | 179 ++++++++++++++++++++++++------------- 1 file changed, 115 insertions(+), 64 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index d67c3fc98f7b..22434e0d4e75 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -487,6 +487,99 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) return 0; } +/** + * scsi_6_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 6-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_6_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("six-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 8; + lba |= ((u64)scsicmd[3]); + + len |= ((u32)scsicmd[4]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_10_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 10-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_10_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("ten-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 24; + lba |= ((u64)scsicmd[3]) << 16; + lba |= ((u64)scsicmd[4]) << 8; + lba |= ((u64)scsicmd[5]); + + len |= ((u32)scsicmd[7]) << 8; + len |= ((u32)scsicmd[8]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_16_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 16-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_16_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("sixteen-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 56; + lba |= ((u64)scsicmd[3]) << 48; + lba |= ((u64)scsicmd[4]) << 40; + lba |= ((u64)scsicmd[5]) << 32; + lba |= ((u64)scsicmd[6]) << 24; + lba |= ((u64)scsicmd[7]) << 16; + lba |= ((u64)scsicmd[8]) << 8; + lba |= ((u64)scsicmd[9]); + + len |= ((u32)scsicmd[10]) << 24; + len |= ((u32)scsicmd[11]) << 16; + len |= ((u32)scsicmd[12]) << 8; + len |= ((u32)scsicmd[13]); + + *plba = lba; + *plen = len; +} + /** * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one * @qc: Storage for translated ATA taskfile @@ -508,38 +601,16 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; - u64 block = 0; - u32 n_block = 0; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if (scsicmd[0] == VERIFY) { - block |= ((u64)scsicmd[2]) << 24; - block |= ((u64)scsicmd[3]) << 16; - block |= ((u64)scsicmd[4]) << 8; - block |= ((u64)scsicmd[5]); - - n_block |= ((u32)scsicmd[7]) << 8; - n_block |= ((u32)scsicmd[8]); - } - - else if (scsicmd[0] == VERIFY_16) { - block |= ((u64)scsicmd[2]) << 56; - block |= ((u64)scsicmd[3]) << 48; - block |= ((u64)scsicmd[4]) << 40; - block |= ((u64)scsicmd[5]) << 32; - block |= ((u64)scsicmd[6]) << 24; - block |= ((u64)scsicmd[7]) << 16; - block |= ((u64)scsicmd[8]) << 8; - block |= ((u64)scsicmd[9]); - - n_block |= ((u32)scsicmd[10]) << 24; - n_block |= ((u32)scsicmd[11]) << 16; - n_block |= ((u32)scsicmd[12]) << 8; - n_block |= ((u32)scsicmd[13]); - } - + if (scsicmd[0] == VERIFY) + scsi_10_lba_len(scsicmd, &block, &n_block); + else if (scsicmd[0] == VERIFY_16) + scsi_16_lba_len(scsicmd, &block, &n_block); else return 1; @@ -636,8 +707,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) struct ata_device *dev = qc->dev; unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; - u64 block = 0; - u32 n_block = 0; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = qc->dev->xfer_protocol; @@ -651,46 +722,26 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } /* Calculate the SCSI LBA and transfer length. */ - if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { - block |= ((u64)scsicmd[2]) << 24; - block |= ((u64)scsicmd[3]) << 16; - block |= ((u64)scsicmd[4]) << 8; - block |= ((u64)scsicmd[5]); - - n_block |= ((u32)scsicmd[7]) << 8; - n_block |= ((u32)scsicmd[8]); - - VPRINTK("ten-byte command\n"); - } else if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { - block |= ((u64)scsicmd[2]) << 8; - block |= ((u64)scsicmd[3]); - - n_block |= ((u32)scsicmd[4]); + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + scsi_10_lba_len(scsicmd, &block, &n_block); + break; + case READ_6: + case WRITE_6: + scsi_6_lba_len(scsicmd, &block, &n_block); /* for 6-byte r/w commands, transfer length 0 * means 256 blocks of data, not 0 block. */ if (!n_block) n_block = 256; - - VPRINTK("six-byte command\n"); - } else if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { - block |= ((u64)scsicmd[2]) << 56; - block |= ((u64)scsicmd[3]) << 48; - block |= ((u64)scsicmd[4]) << 40; - block |= ((u64)scsicmd[5]) << 32; - block |= ((u64)scsicmd[6]) << 24; - block |= ((u64)scsicmd[7]) << 16; - block |= ((u64)scsicmd[8]) << 8; - block |= ((u64)scsicmd[9]); - - n_block |= ((u32)scsicmd[10]) << 24; - n_block |= ((u32)scsicmd[11]) << 16; - n_block |= ((u32)scsicmd[12]) << 8; - n_block |= ((u32)scsicmd[13]); - - VPRINTK("sixteen-byte command\n"); - } else { + break; + case READ_16: + case WRITE_16: + scsi_16_lba_len(scsicmd, &block, &n_block); + break; + default: DPRINTK("no-byte command\n"); return 1; } -- GitLab From 9d5b13021375cad2d64d56105e5f4b5f1509ced2 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:48:17 -0400 Subject: [PATCH 0194/1519] [libata scsi] add CHS support to ata_scsi_start_stop_xlat() --- drivers/scsi/libata-scsi.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 22434e0d4e75..4982e6eff700 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -435,10 +435,21 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, return 1; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ - tf->lbah = 0x0; - tf->lbam = 0x0; - tf->lbal = 0x0; - tf->device |= ATA_LBA; + + if (qc->dev->flags & ATA_DFLAG_LBA) { + qc->tf.flags |= ATA_TFLAG_LBA; + + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + tf->lbam = 0x0; /* cyl low */ + tf->lbah = 0x0; /* cyl high */ + } + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { tf->nsect = 0; /* time period value (0 implies now) */ -- GitLab From 54dac83c426a1a03bd139c5ac7e938890bd2693e Mon Sep 17 00:00:00 2001 From: Jeff Raubitschek Date: Tue, 4 Oct 2005 10:21:19 -0400 Subject: [PATCH 0195/1519] [libata passthru] fix leak on error --- drivers/scsi/libata-scsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 98057563a3cc..75cb685e320b 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -116,8 +116,10 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) if (args[3]) { argsize = SECTOR_SIZE * args[3]; argbuf = kmalloc(argsize, GFP_KERNEL); - if (argbuf == NULL) - return -ENOMEM; + if (argbuf == NULL) { + rc = -ENOMEM; + goto error; + } scsi_cmd[1] = (4 << 1); /* PIO Data-in */ scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, -- GitLab From 36735554571ea619e38210a20f429798de90adc1 Mon Sep 17 00:00:00 2001 From: Dean Roe Date: Mon, 3 Oct 2005 11:51:45 -0500 Subject: [PATCH 0196/1519] [IA64-SGI] Remove references to the SN bist_lock Remove all references to the bist_lock in the SN code as it is not used for anything. Signed-off-by: Dean Roe Signed-off-by: Tony Luck --- include/asm-ia64/sn/nodepda.h | 1 - include/asm-ia64/sn/sn_sal.h | 2 -- 2 files changed, 3 deletions(-) diff --git a/include/asm-ia64/sn/nodepda.h b/include/asm-ia64/sn/nodepda.h index 47bb8100fd00..6f6d69e39ff5 100644 --- a/include/asm-ia64/sn/nodepda.h +++ b/include/asm-ia64/sn/nodepda.h @@ -55,7 +55,6 @@ struct nodepda_s { */ struct phys_cpuid phys_cpuid[NR_CPUS]; spinlock_t ptc_lock ____cacheline_aligned_in_smp; - spinlock_t bist_lock; }; typedef struct nodepda_s nodepda_t; diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index fea35b33d4e4..33aa4043f87d 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -694,12 +694,10 @@ sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array) unsigned long irq_flags; cnodeid = nasid_to_cnodeid(get_node_number(paddr)); - // spin_lock(&NODEPDA(cnodeid)->bist_lock); local_irq_save(irq_flags); ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len, (u64)nasid_array, perms, 0, 0, 0); local_irq_restore(irq_flags); - // spin_unlock(&NODEPDA(cnodeid)->bist_lock); return ret_stuff.status; } #define SN_MEMPROT_ACCESS_CLASS_0 0x14a080 -- GitLab From da9577c531f17f744f3eab40f700e07933d26361 Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:13:37 -0400 Subject: [PATCH 0197/1519] [PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile The patch modifies the Kconfig file to introduce the new memory model options and other related SPARSEMEM changes. There is also a minor change in the Makefile. Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 94 ++++++++++++++++++++++++++----------------- arch/ia64/mm/Makefile | 5 +-- 2 files changed, 58 insertions(+), 41 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 945c15a0722b..a86236d6ba5d 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -63,8 +63,6 @@ config IA64_GENERIC select ACPI select NUMA select ACPI_NUMA - select VIRTUAL_MEM_MAP - select DISCONTIGMEM help This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure @@ -176,40 +174,6 @@ config IA64_L1_CACHE_SHIFT default "6" if ITANIUM # align cache-sensitive data to 64 bytes -config NUMA - bool "NUMA support" - depends on !IA64_HP_SIM - default y if IA64_SGI_SN2 - select ACPI_NUMA - help - Say Y to compile the kernel to support NUMA (Non-Uniform Memory - Access). This option is for configuring high-end multiprocessor - server systems. If in doubt, say N. - -config VIRTUAL_MEM_MAP - bool "Virtual mem map" - default y if !IA64_HP_SIM - help - Say Y to compile the kernel with support for a virtual mem map. - This code also only takes effect if a memory hole of greater than - 1 Gb is found during boot. You must turn this option on if you - require the DISCONTIGMEM option for your machine. If you are - unsure, say Y. - -config HOLES_IN_ZONE - bool - default y if VIRTUAL_MEM_MAP - -config ARCH_DISCONTIGMEM_ENABLE - bool "Discontiguous memory support" - depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP - default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA - help - Say Y to support efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See for more. - config IA64_CYCLONE bool "Cyclone (EXA) Time Source support" help @@ -232,8 +196,10 @@ config IA64_SGI_SN_XP based on a network adapter and DMA messaging. config FORCE_MAX_ZONEORDER - int - default "18" + int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE + range 11 17 if !HUGETLB_PAGE + default "17" if HUGETLB_PAGE + default "11" config SMP bool "Symmetric multi-processing support" @@ -298,6 +264,58 @@ config PREEMPT source "mm/Kconfig" +config ARCH_SELECT_MEMORY_MODEL + def_bool y + +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + help + Say Y to support efficient handling of discontiguous physical memory, + for architectures which are either NUMA (Non-Uniform Memory Access) + or have huge holes in the physical address space for other reasons. + See for more. + +config ARCH_FLATMEM_ENABLE + def_bool y + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on ARCH_DISCONTIGMEM_ENABLE + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) + depends on ARCH_DISCONTIGMEM_ENABLE + +config NUMA + bool "NUMA support" + depends on !IA64_HP_SIM && !FLATMEM + default y if IA64_SGI_SN2 + help + Say Y to compile the kernel to support NUMA (Non-Uniform Memory + Access). This option is for configuring high-end multiprocessor + server systems. If in doubt, say N. + +# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent. +# VIRTUAL_MEM_MAP has been retained for historical reasons. +config VIRTUAL_MEM_MAP + bool "Virtual mem map" + depends on !SPARSEMEM + default y if !IA64_HP_SIM + help + Say Y to compile the kernel with support for a virtual mem map. + This code also only takes effect if a memory hole of greater than + 1 Gb is found during boot. You must turn this option on if you + require the DISCONTIGMEM option for your machine. If you are + unsure, say Y. + +config HOLES_IN_ZONE + bool + default y if VIRTUAL_MEM_MAP + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool y + depends on NEED_MULTIPLE_NODES + config IA32_SUPPORT bool "Support for Linux/x86 binaries" help diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile index 7078f67887ec..d78d20f0a0f0 100644 --- a/arch/ia64/mm/Makefile +++ b/arch/ia64/mm/Makefile @@ -7,6 +7,5 @@ obj-y := init.o fault.o tlb.o extable.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_DISCONTIGMEM) += discontig.o -ifndef CONFIG_DISCONTIGMEM -obj-y += contig.o -endif +obj-$(CONFIG_SPARSEMEM) += discontig.o +obj-$(CONFIG_FLATMEM) += contig.o -- GitLab From c678796cab4b5288ad578802a54cb1480ae20a08 Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:13:44 -0400 Subject: [PATCH 0198/1519] [PATCH] V5 ia64 SPARSEMEM - eliminate contig_page_data For FLATMEM contig_page_data has been made transparent to the arch code. This patch conforms to that change. Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- arch/ia64/mm/contig.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 91a055f5731f..acaaec4e4681 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -269,7 +269,7 @@ paging_init (void) efi_memmap_walk(find_largest_hole, (u64 *)&max_gap); if (max_gap < LARGE_GAP) { vmem_map = (struct page *) 0; - free_area_init_node(0, &contig_page_data, zones_size, 0, + free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size); } else { unsigned long map_size; @@ -282,7 +282,7 @@ paging_init (void) efi_memmap_walk(create_mem_map_page_table, NULL); NODE_DATA(0)->node_mem_map = vmem_map; - free_area_init_node(0, &contig_page_data, zones_size, + free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size); printk("Virtual mem_map starts at 0x%p\n", mem_map); -- GitLab From 1be7d9935b9c7fb9bd5964bfaf3ac543381277db Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:13:50 -0400 Subject: [PATCH 0199/1519] [PATCH] V5 ia64 SPARSEMEM - conditional changes for SPARSEMEM This patch introduces the conditional changes required for the three memory models. With [patch 1/4] there are three memory models; FLATMEM, DISCONTIG and SPARSEMEM. Also a new arch include file sparemem.h is introduced for defining SPARSEMEM parameters. Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- include/asm-ia64/meminit.h | 2 +- include/asm-ia64/mmzone.h | 10 +++++++--- include/asm-ia64/nodedata.h | 4 ++-- include/asm-ia64/page.h | 6 +++--- include/asm-ia64/sparsemem.h | 20 ++++++++++++++++++++ 5 files changed, 33 insertions(+), 9 deletions(-) create mode 100644 include/asm-ia64/sparsemem.h diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h index 1590dc65b30b..74477fc31d51 100644 --- a/include/asm-ia64/meminit.h +++ b/include/asm-ia64/meminit.h @@ -41,7 +41,7 @@ extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg #define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1)) #define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE< #include -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NUMA static inline int pfn_to_nid(unsigned long pfn) { @@ -31,6 +31,10 @@ static inline int pfn_to_nid(unsigned long pfn) #endif } +#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID +extern int early_pfn_to_nid(unsigned long pfn); +#endif + #ifdef CONFIG_IA64_DIG /* DIG systems are small */ # define MAX_PHYSNODE_ID 8 # define NR_NODE_MEMBLKS (MAX_NUMNODES * 8) @@ -39,8 +43,8 @@ static inline int pfn_to_nid(unsigned long pfn) # define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) #endif -#else /* CONFIG_DISCONTIGMEM */ +#else /* CONFIG_NUMA */ # define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) -#endif /* CONFIG_DISCONTIGMEM */ +#endif /* CONFIG_NUMA */ #endif /* _ASM_IA64_MMZONE_H */ diff --git a/include/asm-ia64/nodedata.h b/include/asm-ia64/nodedata.h index 6b0f3ed89b7e..9978c7ce7549 100644 --- a/include/asm-ia64/nodedata.h +++ b/include/asm-ia64/nodedata.h @@ -17,7 +17,7 @@ #include #include -#ifdef CONFIG_DISCONTIGMEM +#ifdef CONFIG_NUMA /* * Node Data. One of these structures is located on each node of a NUMA system. @@ -47,6 +47,6 @@ struct ia64_node_data { */ #define NODE_DATA(nid) (local_node_data->pg_data_ptrs[nid]) -#endif /* CONFIG_DISCONTIGMEM */ +#endif /* CONFIG_NUMA */ #endif /* _ASM_IA64_NODEDATA_H */ diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h index 9edffad8c28b..ef436b9d06ad 100644 --- a/include/asm-ia64/page.h +++ b/include/asm-ia64/page.h @@ -102,15 +102,15 @@ do { \ #ifdef CONFIG_VIRTUAL_MEM_MAP extern int ia64_pfn_valid (unsigned long pfn); -#else +#elif defined(CONFIG_FLATMEM) # define ia64_pfn_valid(pfn) 1 #endif -#ifndef CONFIG_DISCONTIGMEM +#ifdef CONFIG_FLATMEM # define pfn_valid(pfn) (((pfn) < max_mapnr) && ia64_pfn_valid(pfn)) # define page_to_pfn(page) ((unsigned long) (page - mem_map)) # define pfn_to_page(pfn) (mem_map + (pfn)) -#else +#elif defined(CONFIG_DISCONTIGMEM) extern struct page *vmem_map; extern unsigned long max_low_pfn; # define pfn_valid(pfn) (((pfn) < max_low_pfn) && ia64_pfn_valid(pfn)) diff --git a/include/asm-ia64/sparsemem.h b/include/asm-ia64/sparsemem.h new file mode 100644 index 000000000000..67a7c40ec27f --- /dev/null +++ b/include/asm-ia64/sparsemem.h @@ -0,0 +1,20 @@ +#ifndef _ASM_IA64_SPARSEMEM_H +#define _ASM_IA64_SPARSEMEM_H + +#ifdef CONFIG_SPARSEMEM +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ + +#define SECTION_SIZE_BITS (30) +#define MAX_PHYSMEM_BITS (50) +#ifdef CONFIG_FORCE_MAX_ZONEORDER +#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS) +#undef SECTION_SIZE_BITS +#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) +#endif +#endif + +#endif /* CONFIG_SPARSEMEM */ +#endif /* _ASM_IA64_SPARSEMEM_H */ -- GitLab From 2d4b1fa234417b902c9d3034442387c1805bfa7b Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:13:57 -0400 Subject: [PATCH 0200/1519] [PATCH] V5 ia64 SPARSEMEM - SPARSEMEM code changes This patch is the minimal set of changes required by ia64 to use SPARSEMEM. Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- arch/ia64/mm/discontig.c | 43 ++++++++++++++++++++++++++++++++++++++-- arch/ia64/mm/init.c | 2 +- arch/ia64/mm/numa.c | 24 ++++++++++++++++++++++ 3 files changed, 66 insertions(+), 3 deletions(-) diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index b5c90e548195..a3788fb84809 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -421,6 +421,37 @@ static void __init memory_less_nodes(void) return; } +#ifdef CONFIG_SPARSEMEM +/** + * register_sparse_mem - notify SPARSEMEM that this memory range exists. + * @start: physical start of range + * @end: physical end of range + * @arg: unused + * + * Simply calls SPARSEMEM to register memory section(s). + */ +static int __init register_sparse_mem(unsigned long start, unsigned long end, + void *arg) +{ + int nid; + + start = __pa(start) >> PAGE_SHIFT; + end = __pa(end) >> PAGE_SHIFT; + nid = early_pfn_to_nid(start); + memory_present(nid, start, end); + + return 0; +} + +static void __init arch_sparse_init(void) +{ + efi_memmap_walk(register_sparse_mem, NULL); + sparse_init(); +} +#else +#define arch_sparse_init() do {} while (0) +#endif + /** * find_memory - walk the EFI memory map and setup the bootmem allocator * @@ -528,8 +559,10 @@ void show_mem(void) int shared = 0, cached = 0, reserved = 0; printk("Node ID: %d\n", pgdat->node_id); for(i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat_page_nr(pgdat, i); - if (!ia64_pfn_valid(pgdat->node_start_pfn+i)) + struct page *page; + if (pfn_valid(pgdat->node_start_pfn + i)) + page = pfn_to_page(pgdat->node_start_pfn + i); + else continue; if (PageReserved(page)) reserved++; @@ -648,12 +681,16 @@ void __init paging_init(void) max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; + arch_sparse_init(); + efi_memmap_walk(filter_rsvd_memory, count_node_pages); +#ifdef CONFIG_VIRTUAL_MEM_MAP vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page)); vmem_map = (struct page *) vmalloc_end; efi_memmap_walk(create_mem_map_page_table, NULL); printk("Virtual mem_map starts at 0x%p\n", vmem_map); +#endif for_each_online_node(node) { memset(zones_size, 0, sizeof(zones_size)); @@ -690,7 +727,9 @@ void __init paging_init(void) pfn_offset = mem_data[node].min_pfn; +#ifdef CONFIG_VIRTUAL_MEM_MAP NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset; +#endif free_area_init_node(node, NODE_DATA(node), zones_size, pfn_offset, zholes_size); } diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 1281c609ee98..98246acd4991 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -593,7 +593,7 @@ mem_init (void) platform_dma_init(); #endif -#ifndef CONFIG_DISCONTIGMEM +#ifdef CONFIG_FLATMEM if (!mem_map) BUG(); max_mapnr = max_low_pfn; diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c index 77118bbf3d8b..4e5c8b36ad93 100644 --- a/arch/ia64/mm/numa.c +++ b/arch/ia64/mm/numa.c @@ -47,3 +47,27 @@ paddr_to_nid(unsigned long paddr) return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0); } + +#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA) +/* + * Because of holes evaluate on section limits. + * If the section of memory exists, then return the node where the section + * resides. Otherwise return node 0 as the default. This is used by + * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where + * the section resides. + */ +int early_pfn_to_nid(unsigned long pfn) +{ + int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec; + + for (i = 0; i < num_node_memblks; i++) { + ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT; + esec = (node_memblk[i].start_paddr + node_memblk[i].size + + ((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT; + if (section >= ssec && section < esec) + return node_memblk[i].nid; + } + + return 0; +} +#endif -- GitLab From 1e5c936e3cc2ab745f66c0ae296c42f892ffd42a Mon Sep 17 00:00:00 2001 From: Bob Picco Date: Tue, 4 Oct 2005 15:14:05 -0400 Subject: [PATCH 0201/1519] [PATCH] V5 ia64 SPARSEMEM - gensparse_defconfig gensparse_defconfig is a config generated file for SPARSEMEM and GENERIC kernel configuration (defconfig). Signed-off-by: Bob Picco Signed-off-by: Tony Luck --- arch/ia64/configs/gensparse_defconfig | 1319 +++++++++++++++++++++++++ 1 file changed, 1319 insertions(+) create mode 100644 arch/ia64/configs/gensparse_defconfig diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig new file mode 100644 index 000000000000..80f8663bc6d9 --- /dev/null +++ b/arch/ia64/configs/gensparse_defconfig @@ -0,0 +1,1319 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc2 +# Wed Sep 28 08:27:29 2005 +# + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Processor type and features +# +CONFIG_IA64=y +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_TIME_INTERPOLATION=y +CONFIG_EFI=y +CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_IA64_GENERIC=y +# CONFIG_IA64_DIG is not set +# CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set +# CONFIG_IA64_SGI_SN2 is not set +# CONFIG_IA64_HP_SIM is not set +# CONFIG_ITANIUM is not set +CONFIG_MCKINLEY=y +# CONFIG_IA64_PAGE_SIZE_4KB is not set +# CONFIG_IA64_PAGE_SIZE_8KB is not set +CONFIG_IA64_PAGE_SIZE_16KB=y +# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_IA64_L1_CACHE_SHIFT=7 +CONFIG_IA64_CYCLONE=y +CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set +CONFIG_FORCE_MAX_ZONEORDER=17 +CONFIG_SMP=y +CONFIG_NR_CPUS=512 +CONFIG_HOTPLUG_CPU=y +# CONFIG_SCHED_SMT is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_IA32_SUPPORT=y +CONFIG_COMPAT=y +CONFIG_IA64_MCA_RECOVERY=y +CONFIG_PERFMON=y +CONFIG_IA64_PALINFO=y + +# +# Firmware Drivers +# +CONFIG_EFI_VARS=y +CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m + +# +# Power management and ACPI +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set + +# +# ACPI (Advanced Configuration and Power Interface) Support +# +CONFIG_ACPI=y +CONFIG_ACPI_BUTTON=m +CONFIG_ACPI_FAN=m +CONFIG_ACPI_PROCESSOR=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_NUMA=y +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_POWER=y +CONFIG_ACPI_SYSTEM=y +CONFIG_ACPI_CONTAINER=m + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options (PCI, PCMCIA) +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +CONFIG_HOTPLUG_PCI_ACPI=m +# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SGI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_BLK_DEV_IDEFLOPPY=y +CONFIG_BLK_DEV_IDESCSI=m +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SGIIOC4=y +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +CONFIG_SCSI_SATA_VITESSE=y +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +CONFIG_SCSI_QLOGIC_1280=y +# CONFIG_SCSI_QLOGIC_1280_1040 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set + +# +# Fusion MPT device support +# +CONFIG_FUSION=y +CONFIG_FUSION_SPI=y +CONFIG_FUSION_FC=m +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=m +# CONFIG_TULIP_MWI is not set +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=m +CONFIG_E100=m +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set +# CONFIG_GAMEPORT_EMU10K1 is not set +# CONFIG_GAMEPORT_FM801 is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_STALDRV is not set +CONFIG_SGI_SNSC=y +CONFIG_SGI_TIOCX=y +CONFIG_SGI_MBCS=m + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_ACPI=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_SGI_L1_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_SGI_IOC4=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_EFI_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +CONFIG_AGP=m +CONFIG_AGP_I460=m +CONFIG_AGP_HP_ZX1=m +CONFIG_AGP_SGI_TIOCA=m +CONFIG_DRM=m +CONFIG_DRM_TDFX=m +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +CONFIG_DRM_MGA=m +CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +CONFIG_RAW_DRIVER=m +CONFIG_HPET=y +# CONFIG_HPET_RTC_IRQ is not set +CONFIG_HPET_MMAP=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set +CONFIG_MMTIMER=y + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_DUMMY=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CS4281=m +CONFIG_SND_EMU10K1=m +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +CONFIG_SND_FM801=m +# CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set + +# +# SN Devices +# +CONFIG_SGI_IOC4=y + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=y +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y + +# +# HP Simulator drivers +# +# CONFIG_HP_SIMETH is not set +# CONFIG_HP_SIMSERIAL is not set +# CONFIG_HP_SIMSCSI is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set +CONFIG_IA64_GRANULE_16MB=y +# CONFIG_IA64_GRANULE_64MB is not set +# CONFIG_IA64_PRINT_HAZARDS is not set +# CONFIG_DISABLE_VHPT is not set +# CONFIG_IA64_DEBUG_CMPXCHG is not set +# CONFIG_IA64_DEBUG_IRQ is not set +CONFIG_SYSVIPC_COMPAT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- GitLab From 67846b30171cc4d706125f630193a76a26bb334a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 02:58:32 -0400 Subject: [PATCH 0202/1519] libata: add ata_ratelimit(), use it in AHCI driver irq handler --- drivers/scsi/ahci.c | 31 +++++++++++++++++++++++++------ drivers/scsi/libata-core.c | 23 +++++++++++++++++++++++ include/linux/libata.h | 2 ++ 3 files changed, 50 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c2c8fa828e24..5ec866b00479 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -672,17 +672,36 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap; - u32 tmp; - VPRINTK("port %u\n", i); + if (!(irq_stat & (1 << i))) + continue; + ap = host_set->ports[i]; - tmp = irq_stat & (1 << i); - if (tmp && ap) { + if (ap) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (ahci_host_intr(ap, qc)) - irq_ack |= (1 << i); + if (!ahci_host_intr(ap, qc)) + if (ata_ratelimit()) { + struct pci_dev *pdev = + to_pci_dev(ap->host_set->dev); + printk(KERN_WARNING + "ahci(%s): unhandled interrupt on port %u\n", + pci_name(pdev), i); + } + + VPRINTK("port %u\n", i); + } else { + VPRINTK("port %u (no irq)\n", i); + if (ata_ratelimit()) { + struct pci_dev *pdev = + to_pci_dev(ap->host_set->dev); + printk(KERN_WARNING + "ahci(%s): interrupt on disabled port %u\n", + pci_name(pdev), i); + } } + + irq_ack |= (1 << i); } if (irq_ack) { diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f0894bfa908b..ceffaef37d17 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include "scsi.h" #include "scsi_priv.h" @@ -4688,6 +4689,27 @@ static void __exit ata_exit(void) module_init(ata_init); module_exit(ata_exit); +static unsigned long ratelimit_time; +static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED; + +int ata_ratelimit(void) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&ata_ratelimit_lock, flags); + + if (time_after(jiffies, ratelimit_time)) { + rc = 1; + ratelimit_time = jiffies + (HZ/5); + } else + rc = 0; + + spin_unlock_irqrestore(&ata_ratelimit_lock, flags); + + return rc; +} + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -4729,6 +4751,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_port_disable); +EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_error); diff --git a/include/linux/libata.h b/include/linux/libata.h index 4d45179872cc..7929cfc9318d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -410,6 +410,8 @@ extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn extern int ata_scsi_error(struct Scsi_Host *host); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +extern int ata_ratelimit(void); + /* * Default driver ops implementations */ -- GitLab From a15dbeb4772626a015337dea06da67095aec3862 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 15:02:14 -0400 Subject: [PATCH 0203/1519] libata: ATAPI command completion tweaks and notes 1) note urgent bug, that completes command twice 2) only fix up INQUIRY data if the SCSI version is zero (typically indicates ATAPI MMC-ish device) 3) if there is a problem on the ATA bus, don't bother with REQUEST SENSE, just directly handle the error based on Status/Error registers. --- drivers/scsi/libata-scsi.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 45ebe9fd52ea..1a1ef3429e55 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1483,9 +1483,18 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; - if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) { + if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) + ata_to_sense_error(qc, drv_stat); + else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); + /* FIXME: command completion with check condition + * but no sense causes the error handler to run, + * which then issues REQUEST SENSE, fills in the sense + * buffer, and completes the command (for the second + * time). We need to issue REQUEST SENSE some other + * way, to avoid completing the command twice. + */ cmd->result = SAM_STAT_CHECK_CONDITION; qc->scsidone(cmd); @@ -1499,10 +1508,26 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) unsigned int buflen; buflen = ata_scsi_rbuf_get(cmd, &buf); - buf[2] = 0x5; - buf[3] = (buf[3] & 0xf0) | 2; + + /* ATAPI devices typically report zero for their SCSI version, + * and sometimes deviate from the spec WRT response data + * format. If SCSI version is reported as zero like normal, + * then we make the following fixups: 1) Fake MMC-5 version, + * to indicate to the Linux scsi midlayer this is a modern + * device. 2) Ensure response data format / ATAPI information + * are always correct. + */ + /* FIXME: do we ever override EVPD pages and the like, with + * this code? + */ + if (buf[2] == 0) { + buf[2] = 0x5; + buf[3] = 0x32; + } + ata_scsi_rbuf_put(cmd, buf); } + cmd->result = SAM_STAT_GOOD; } -- GitLab From a939c9631527053aa38aa8795a6f7203c7f20b69 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 17:09:16 -0400 Subject: [PATCH 0204/1519] libata: move atapi_request_sense() to libata-scsi module No content changes, just moving code around. --- drivers/scsi/libata-core.c | 49 +------------------------------------- drivers/scsi/libata-scsi.c | 46 +++++++++++++++++++++++++++++++++++ drivers/scsi/libata.h | 3 +++ 3 files changed, 50 insertions(+), 48 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ceffaef37d17..f731bbdd4236 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -71,7 +71,6 @@ static int fgb(u32 bitmap); static int ata_choose_xfer_mode(struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); static void __ata_qc_complete(struct ata_queued_cmd *qc); static unsigned int ata_unique_id = 1; @@ -3015,52 +3014,6 @@ static void ata_pio_task(void *_data) goto fsm_start; } -static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd) -{ - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - unsigned long flags; - int rc; - - DPRINTK("ATAPI request sense\n"); - - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); - - /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); - - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); - qc->dma_dir = DMA_FROM_DEVICE; - - memset(&qc->cdb, 0, ap->cdb_len); - qc->cdb[0] = REQUEST_SENSE; - qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.command = ATA_CMD_PACKET; - - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - qc->nbytes = SCSI_SENSE_BUFFERSIZE; - - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - if (rc) - ata_port_disable(ap); - else - wait_for_completion(&wait); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out @@ -3254,7 +3207,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, return qc; } -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) +int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) { return 0; } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1a1ef3429e55..c58a7a19780f 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1479,6 +1479,52 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 done(cmd); } +void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + DPRINTK("ATAPI request sense\n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + /* FIXME: is this needed? */ + memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + + ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + qc->dma_dir = DMA_FROM_DEVICE; + + memset(&qc->cdb, 0, ap->cdb_len); + qc->cdb[0] = REQUEST_SENSE; + qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.command = ATA_CMD_PACKET; + + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + qc->nbytes = SCSI_SENSE_BUFFERSIZE; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index c7a1fa1c9abc..a4b55dc9c698 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -39,6 +39,7 @@ struct ata_scsi_args { /* libata-core.c */ extern int atapi_enabled; +extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern void ata_qc_free(struct ata_queued_cmd *qc); @@ -51,6 +52,8 @@ extern void swap_buf_le16(u16 *buf, unsigned int buf_words); /* libata-scsi.c */ +extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd); extern void ata_scsi_scan_host(struct ata_port *ap); extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); -- GitLab From afb0edd922c7ed6e73678730921dfcccebec17e8 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Wed, 5 Oct 2005 17:08:42 -0400 Subject: [PATCH 0205/1519] [PATCH] libata: Marvell spinlock fixes and simplification This should fix up lockups that people were seeing due to improper spinlock placement. Also, the start/stop DMA routines put guarded trust in the cached state of DMA. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 58 +++++++++++++++++------------------------- 1 file changed, 24 insertions(+), 34 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ecda7df21142..c3084f8b3ee7 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.22" +#define DRV_VERSION "0.23" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -406,40 +406,30 @@ static void mv_irq_clear(struct ata_port *ap) { } -static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp, - struct ata_port *ap) +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) { - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - - writelfl(EDMA_EN, base + EDMA_CMD_OFS); - pp->pp_flags |= MV_PP_FLAG_EDMA_EN; - - spin_unlock_irqrestore(&ap->host_set->lock, flags); + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + } + assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); } static void mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; - unsigned long flags; u32 reg; int i; - spin_lock_irqsave(&ap->host_set->lock, flags); - - if (!(MV_PP_FLAG_EDMA_DS_ACT & pp->pp_flags) && - ((MV_PP_FLAG_EDMA_EN & pp->pp_flags) || - (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)))) { - /* Disable EDMA if we're not already trying to disable it - * and it is currently active. The disable bit auto clears. + if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { + /* Disable EDMA if active. The disable bit auto clears. */ - pp->pp_flags |= MV_PP_FLAG_EDMA_DS_ACT; writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); + } /* now properly wait for the eDMA to stop */ for (i = 1000; i > 0; i--) { @@ -450,12 +440,9 @@ static void mv_stop_dma(struct ata_port *ap) udelay(100); } - spin_lock_irqsave(&ap->host_set->lock, flags); - pp->pp_flags &= ~MV_PP_FLAG_EDMA_DS_ACT; - spin_unlock_irqrestore(&ap->host_set->lock, flags); - if (EDMA_EN & reg) { printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + /* FIXME: Consider doing a reset here to recover */ } } @@ -716,8 +703,11 @@ static void mv_port_stop(struct ata_port *ap) { struct device *dev = ap->host_set->dev; struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + spin_lock_irqsave(&ap->host_set->lock, flags); mv_stop_dma(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); ap->private_data = NULL; dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); @@ -867,11 +857,7 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) mv_inc_q_index(&pp->req_producer); /* now incr producer index */ - if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { - /* turn on EDMA if not already on */ - mv_start_dma(port_mmio, pp, qc->ap); - } - assert(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + mv_start_dma(port_mmio, pp); /* and write the request in pointer to kick the EDMA to life */ in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; @@ -921,8 +907,12 @@ static void mv_err_intr(struct ata_port *ap) serr = scr_read(ap, SCR_ERROR); scr_write_flush(ap, SCR_ERROR, serr); } - DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n", - ap->port_no, edma_err_cause, serr); + if (EDMA_ERR_SELF_DIS & edma_err_cause) { + struct mv_port_priv *pp = ap->private_data; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " + "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); /* Clear EDMA now that SERR cleanup done */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -1034,7 +1024,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", readl(mmio + PCI_IRQ_CAUSE_OFS)); - VPRINTK("All regs @ PCI error\n"); + DPRINTK("All regs @ PCI error\n"); mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); -- GitLab From 05b308e1df6d9d673daedb517969241f41278b52 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Wed, 5 Oct 2005 17:08:53 -0400 Subject: [PATCH 0206/1519] [PATCH] libata: Marvell function headers adds helpful function header comments. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 225 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 219 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index c3084f8b3ee7..84b488f81c75 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.23" +#define DRV_VERSION "0.24" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -406,6 +406,17 @@ static void mv_irq_clear(struct ata_port *ap) { } +/** + * mv_start_dma - Enable eDMA engine + * @base: port base address + * @pp: port private data + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) { if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { @@ -415,6 +426,16 @@ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); } +/** + * mv_stop_dma - Disable eDMA engine + * @ap: ATA channel to manipulate + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ static void mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -561,7 +582,15 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -/* This routine only applies to 6xxx parts */ +/** + * mv_global_soft_reset - Perform the 6xxx global soft reset + * @mmio_base: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ static int mv_global_soft_reset(void __iomem *mmio_base) { void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; @@ -617,6 +646,16 @@ static int mv_global_soft_reset(void __iomem *mmio_base) return rc; } +/** + * mv_host_stop - Host specific cleanup/stop routine. + * @host_set: host data structure + * + * Disable ints, cleanup host memory, call general purpose + * host_stop. + * + * LOCKING: + * Inherited from caller. + */ static void mv_host_stop(struct ata_host_set *host_set) { struct mv_host_priv *hpriv = host_set->private_data; @@ -631,6 +670,16 @@ static void mv_host_stop(struct ata_host_set *host_set) ata_host_stop(host_set); } +/** + * mv_port_start - Port specific init/start routine. + * @ap: ATA channel to manipulate + * + * Allocate and point to DMA memory, init port private memory, + * zero indices. + * + * LOCKING: + * Inherited from caller. + */ static int mv_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -699,6 +748,15 @@ static int mv_port_start(struct ata_port *ap) return 0; } +/** + * mv_port_stop - Port specific cleanup/stop routine. + * @ap: ATA channel to manipulate + * + * Stop DMA, cleanup port memory. + * + * LOCKING: + * This routine uses the host_set lock to protect the DMA stop. + */ static void mv_port_stop(struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -714,6 +772,15 @@ static void mv_port_stop(struct ata_port *ap) kfree(pp); } +/** + * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries + * @qc: queued command whose SG list to source from + * + * Populate the SG list and mark the last entry. + * + * LOCKING: + * Inherited from caller. + */ static void mv_fill_sg(struct ata_queued_cmd *qc) { struct mv_port_priv *pp = qc->ap->private_data; @@ -748,6 +815,18 @@ static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) (last ? CRQB_CMD_LAST : 0); } +/** + * mv_qc_prep - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ static void mv_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -830,6 +909,18 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) mv_fill_sg(qc); } +/** + * mv_qc_issue - Initiate a command to the host + * @qc: queued command to start + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it sanity checks our local + * caches of the request producer/consumer indices then enables + * DMA and bumps the request producer index. + * + * LOCKING: + * Inherited from caller. + */ static int mv_qc_issue(struct ata_queued_cmd *qc) { void __iomem *port_mmio = mv_ap_base(qc->ap); @@ -867,6 +958,19 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) return 0; } +/** + * mv_get_crpb_status - get status from most recently completed cmd + * @ap: ATA channel to manipulate + * + * This routine is for use when the port is in DMA mode, when it + * will be using the CRPB (command response block) method of + * returning command completion information. We assert indices + * are good, grab status, and bump the response consumer index to + * prove that we're up to date. + * + * LOCKING: + * Inherited from caller. + */ static u8 mv_get_crpb_status(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -896,6 +1000,19 @@ static u8 mv_get_crpb_status(struct ata_port *ap) return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT); } +/** + * mv_err_intr - Handle error interrupts on the port + * @ap: ATA channel to manipulate + * + * In most cases, just clear the interrupt and move on. However, + * some cases require an eDMA reset, which is done right before + * the COMRESET in mv_phy_reset(). The SERR case requires a + * clear of pending errors in the SATA SERROR register. Finally, + * if the port disabled DMA, update our cached copy to match. + * + * LOCKING: + * Inherited from caller. + */ static void mv_err_intr(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -923,7 +1040,22 @@ static void mv_err_intr(struct ata_port *ap) } } -/* Handle any outstanding interrupts in a single SATAHC */ +/** + * mv_host_intr - Handle all interrupts on the given host controller + * @host_set: host specific structure + * @relevant: port error bits relevant to this host controller + * @hc: which host controller we're to look at + * + * Read then write clear the HC interrupt status then walk each + * port connected to the HC and see if it needs servicing. Port + * success ints are reported in the HC interrupt status reg, the + * port error ints are reported in the higher level main + * interrupt status register and thus are passed in via the + * 'relevant' argument. + * + * LOCKING: + * Inherited from caller. + */ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, unsigned int hc) { @@ -993,6 +1125,21 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, VPRINTK("EXIT\n"); } +/** + * mv_interrupt - + * @irq: unused + * @dev_instance: private data; in this case the host structure + * @regs: unused + * + * Read the read only register to determine if any host + * controllers have pending interrupts. If so, call lower level + * routine to handle. Also check for PCI errors which are only + * reported here. + * + * LOCKING: + * This routine holds the host_set lock while processing pending + * interrupts. + */ static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { @@ -1035,14 +1182,32 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } +/** + * mv_check_err - Return the error shadow register to caller. + * @ap: ATA channel to manipulate + * + * Marvell requires DMA to be stopped before accessing shadow + * registers. So we do that, then return the needed register. + * + * LOCKING: + * Inherited from caller. FIXME: protect mv_stop_dma with lock? + */ static u8 mv_check_err(struct ata_port *ap) { mv_stop_dma(ap); /* can't read shadow regs if DMA on */ return readb((void __iomem *) ap->ioaddr.error_addr); } -/* Part of this is taken from __sata_phy_reset and modified to not sleep - * since this routine gets called from interrupt level. +/** + * mv_phy_reset - Perform eDMA reset followed by COMRESET + * @ap: ATA channel to manipulate + * + * Part of this is taken from __sata_phy_reset and modified to + * not sleep since this routine gets called from interrupt level. + * + * LOCKING: + * Inherited from caller. This is coded to safe to call at + * interrupt level, i.e. it does not sleep. */ static void mv_phy_reset(struct ata_port *ap) { @@ -1105,6 +1270,16 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } +/** + * mv_eng_timeout - Routine called by libata when SCSI times out I/O + * @ap: ATA channel to manipulate + * + * Intent is to clear all pending error conditions, reset the + * chip/bus, fail the command, and move on. + * + * LOCKING: + * This routine holds the host_set lock while failing the command. + */ static void mv_eng_timeout(struct ata_port *ap) { struct ata_queued_cmd *qc; @@ -1140,6 +1315,18 @@ static void mv_eng_timeout(struct ata_port *ap) } } +/** + * mv_port_init - Perform some early initialization on a single port. + * @port: libata data structure storing shadow register addresses + * @port_mmio: base address of the port + * + * Initialize shadow register mmio addresses, clear outstanding + * interrupts on the port, and unmask interrupts for the future + * start of the port. + * + * LOCKING: + * Inherited from caller. + */ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) { unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; @@ -1177,6 +1364,16 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } +/** + * mv_host_init - Perform some early initialization of the host. + * @probe_ent: early data struct representing the host + * + * If possible, do an early global reset of the host. Then do + * our port init and clear/unmask all/relevant host interrupts. + * + * LOCKING: + * Inherited from caller. + */ static int mv_host_init(struct ata_probe_ent *probe_ent) { int rc = 0, n_hc, port, hc; @@ -1226,7 +1423,15 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) return rc; } -/* FIXME: complete this */ +/** + * mv_print_info - Dump key info to kernel log for perusal. + * @probe_ent: early data struct representing the host + * + * FIXME: complete this. + * + * LOCKING: + * Inherited from caller. + */ static void mv_print_info(struct ata_probe_ent *probe_ent) { struct pci_dev *pdev = to_pci_dev(probe_ent->dev); @@ -1253,6 +1458,14 @@ static void mv_print_info(struct ata_probe_ent *probe_ent) scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); } +/** + * mv_init_one - handle a positive probe of a Marvell host + * @pdev: PCI device found + * @ent: PCI device ID entry for the matched host + * + * LOCKING: + * Inherited from caller. + */ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; -- GitLab From 8a70f8dc08dd40b7f8ac77280eaa99a8c6bc46f4 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 17:19:47 -0400 Subject: [PATCH 0207/1519] [libata sata_mv] fix warning shuffle ifdef location to fix the following warning: drivers/scsi/sata_mv.c:471: warning: 'mv_dump_mem' defined but not used --- drivers/scsi/sata_mv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 84b488f81c75..d457f5673476 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -467,9 +467,9 @@ static void mv_stop_dma(struct ata_port *ap) } } +#ifdef ATA_DEBUG static void mv_dump_mem(void __iomem *start, unsigned bytes) { -#ifdef ATA_DEBUG int b, w; for (b = 0; b < bytes; ) { DPRINTK("%p: ", start + b); @@ -479,8 +479,9 @@ static void mv_dump_mem(void __iomem *start, unsigned bytes) } printk("\n"); } -#endif } +#endif + static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) { #ifdef ATA_DEBUG -- GitLab From e12669e774be403c84baa651306d305752a35cd8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 18:39:23 -0400 Subject: [PATCH 0208/1519] libata: minor cleanups A few code shuffles, to make merging future code easier. Add (DRIVER_SENSE << 24) to certain result codes, as noted by Douglas Gilbert. --- drivers/scsi/libata-core.c | 6 +++--- drivers/scsi/libata-scsi.c | 12 ++++++++---- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f731bbdd4236..d568914c4344 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3131,14 +3131,14 @@ void ata_eng_timeout(struct ata_port *ap) DPRINTK("ENTER\n"); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { + if (qc) + ata_qc_timeout(qc); + else { printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); goto out; } - ata_qc_timeout(qc); - out: DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index c58a7a19780f..1c3a10fb3c44 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -225,7 +225,7 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) }; int i = 0; - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; /* * Is this an error we can process/parse @@ -1468,7 +1468,7 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; cmd->sense_buffer[0] = 0x70; cmd->sense_buffer[2] = ILLEGAL_REQUEST; @@ -1529,8 +1529,11 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; + VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat); + if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) ata_to_sense_error(qc, drv_stat); + else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); @@ -1546,7 +1549,9 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) qc->scsidone(cmd); return 1; - } else { + } + + else { u8 *scsicmd = cmd->cmnd; if (scsicmd[0] == INQUIRY) { @@ -1578,7 +1583,6 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) } qc->scsidone(cmd); - return 0; } /** -- GitLab From ad6e90f6d0c4243cc35e07e2681a3323af533ce4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:29 +0900 Subject: [PATCH 0209/1519] [PATCH] sil24: ignore non-error exception irqs 01_sil24_ignore-non-error-exception-irqs.patch Do not error-finish commands for non-error exception irqs - just ignore them. This is taken from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index d8a2f5f04e82..571302dc48a3 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -489,12 +489,21 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ + + if (!(irq_stat & PORT_IRQ_ERROR)) { + /* ignore non-completion, non-error irqs for now */ + printk(KERN_WARNING DRV_NAME + "ata%u: non-error exception irq (irq_stat %x)\n", + ap->id, irq_stat); + return; + } + cmd_err = readl(port + PORT_CMD_ERR); sstatus = readl(port + PORT_SSTATUS); serror = readl(port + PORT_SERROR); /* Clear IRQ/errors */ - writel(irq_stat, port + PORT_IRQ_STAT); if (cmd_err) writel(cmd_err, port + PORT_CMD_ERR); if (serror) -- GitLab From 46b93e7bce80a08ea07e250d03b0b596cbd32595 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:34 +0900 Subject: [PATCH 0210/1519] [PATCH] sil24: remove CMDERR clearing 02_sil24_remove-cmderr-clearing.patch CMDERR register doesn't need clearing. This is from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 4 ---- 1 file changed, 4 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 571302dc48a3..032d9c093979 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -502,10 +502,6 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) cmd_err = readl(port + PORT_CMD_ERR); sstatus = readl(port + PORT_SSTATUS); serror = readl(port + PORT_SERROR); - - /* Clear IRQ/errors */ - if (cmd_err) - writel(cmd_err, port + PORT_CMD_ERR); if (serror) writel(serror, port + PORT_SERROR); -- GitLab From 6a575fa969beeddd0859f9e9d26ab16c6a0d8d6a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:39 +0900 Subject: [PATCH 0211/1519] [PATCH] sil24: implement proper TF register reading & caching 03_sil24_add-tf-reading.patch This patch implements proper TF register reading back and caching and bumps up version to 0.22. This is taken from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 50 +++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 45 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 50 +++++++++++++++++++++++++++++++++++---- 1 file changed, 45 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 032d9c093979..b65194c755f8 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.21" /* Silicon Image's preview driver was 0.10 */ +#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */ #define NR_PORTS 4 @@ -216,6 +216,7 @@ struct sil24_cmd_block { struct sil24_port_priv { struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ + struct ata_taskfile tf; /* Cached taskfile registers */ }; /* ap->host_set->private_data */ @@ -322,14 +323,25 @@ static struct ata_port_info sil24_port_info[] = { }, }; +static inline void sil24_update_tf(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + void *port = (void *)ap->ioaddr.cmd_addr; + struct sil24_prb *prb = port; + + ata_tf_from_fis(prb->fis, &pp->tf); +} + static u8 sil24_check_status(struct ata_port *ap) { - return ATA_DRDY; + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.command; } static u8 sil24_check_err(struct ata_port *ap) { - return 0; + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.feature; } static int sil24_scr_map[] = { @@ -485,6 +497,7 @@ static void sil24_eng_timeout(struct ata_port *ap) static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; void *port = (void *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; @@ -509,8 +522,22 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) { + /* + * Device is reporting error, tf registers are valid. + */ + sil24_update_tf(ap); + } else { + /* + * Other errors. libata currently doesn't have any + * mechanism to report these errors. Just turn on + * ATA_ERR. + */ + pp->tf.command = ATA_ERR; + } + if (qc) - ata_qc_complete(qc, ATA_ERR); + ata_qc_complete(qc, pp->tf.command); sil24_reset_controller(ap); } @@ -523,8 +550,19 @@ static inline void sil24_host_intr(struct ata_port *ap) slot_stat = readl(port + PORT_SLOT_STAT); if (!(slot_stat & HOST_SSTAT_ATTN)) { + struct sil24_port_priv *pp = ap->private_data; + /* + * !HOST_SSAT_ATTN guarantees successful completion, + * so reading back tf registers is unnecessary for + * most commands. TODO: read tf registers for + * commands which require these values on successful + * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER, + * DEVICE RESET and READ PORT MULTIPLIER (any more?). + */ + sil24_update_tf(ap); + if (qc) - ata_qc_complete(qc, 0); + ata_qc_complete(qc, pp->tf.command); } else sil24_error_intr(ap, slot_stat); } @@ -579,6 +617,8 @@ static int sil24_port_start(struct ata_port *ap) return -ENOMEM; memset(pp, 0, sizeof(*pp)); + pp->tf.command = ATA_DRDY; + cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); if (!cb) { kfree(pp); -- GitLab From 0e5dec478cfff2c29e68d1108ff828fa321adc59 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 6 Oct 2005 09:40:20 -0400 Subject: [PATCH 0212/1519] [libata passthru] add (DRIVER_SENSE << 24) to all check-conditions --- drivers/scsi/libata-scsi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 75cb685e320b..1b00bc618e15 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -500,7 +500,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; /* * Read the controller registers. @@ -575,7 +575,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; /* * Read the controller registers. @@ -1638,7 +1638,7 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; cmd->sense_buffer[0] = 0x70; cmd->sense_buffer[2] = ILLEGAL_REQUEST; -- GitLab From 7f726d125d570f38b9e7c8a2decebc39c0a343dc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 7 Oct 2005 01:43:19 +0900 Subject: [PATCH 0213/1519] [PATCH] sil24: implement tf_read callback Hello, guys. This patch implements ->tf_read callback for sil24. It didn't use to be necessary but new ata_gen_fixed_sense now makes use of ->tf_read callback. This patch is taken from Edward Falk's driver. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index b65194c755f8..693330bdc821 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -229,6 +229,7 @@ static u8 sil24_check_status(struct ata_port *ap); static u8 sil24_check_err(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void sil24_phy_reset(struct ata_port *ap); static void sil24_qc_prep(struct ata_queued_cmd *qc); static int sil24_qc_issue(struct ata_queued_cmd *qc); @@ -280,6 +281,8 @@ static struct ata_port_operations sil24_ops = { .check_err = sil24_check_err, .dev_select = ata_noop_dev_select, + .tf_read = sil24_tf_read, + .phy_reset = sil24_phy_reset, .qc_prep = sil24_qc_prep, @@ -372,6 +375,12 @@ static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) } } +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct sil24_port_priv *pp = ap->private_data; + *tf = pp->tf; +} + static void sil24_phy_reset(struct ata_port *ap) { __sata_phy_reset(ap); -- GitLab From 845c5834d0aa60eb1588397696e7fabbaab2d3b0 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sun, 9 Oct 2005 08:55:41 -0400 Subject: [PATCH 0214/1519] [libata scsi] add ata_scsi_set_sense helper - add extern ata_scsi_set_sense() to build SCSI fixed sense data and corresponding SCSI status Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 28 ++++++++++++++++++++++++++++ drivers/scsi/libata.h | 2 ++ 2 files changed, 30 insertions(+) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1c3a10fb3c44..bca9a5016b17 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1450,6 +1450,34 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, return 0; } +/** + * ata_scsi_set_sense - Set SCSI sense data and status + * @cmd: SCSI request to be handled + * @sk: SCSI-defined sense key + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that builds a valid fixed format, current + * response code and the given sense key (sk), additional sense + * code (asc) and additional sense code qualifier (ascq) with + * a SCSI command status of %SAM_STAT_CHECK_CONDITION and + * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . + * + * LOCKING: + * Not required + */ + +void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + cmd->sense_buffer[0] = 0x70; /* fixed format, current */ + cmd->sense_buffer[2] = sk; + cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ + cmd->sense_buffer[12] = asc; + cmd->sense_buffer[13] = ascq; +} + /** * ata_scsi_badcmd - End a SCSI request with an error * @cmd: SCSI request to be handled diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index a4b55dc9c698..4622e643ffd3 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -80,6 +80,8 @@ extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq); +extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, + u8 sk, u8 asc, u8 ascq); extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); -- GitLab From ae00651020413bd7eb5fa3bd0abbd78d7cf1abb2 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sun, 9 Oct 2005 09:09:35 -0400 Subject: [PATCH 0215/1519] [libata scsi] improve scsi error handling with ata_scsi_set_sense() - change "xlat" and "fill" actors in libata-scsi so they are responsible for SCSI status and sense data when they return 1. This allows GOOD status or a specialized error to be set. - yield an error for mode sense requests for saved values [sat-r06] - remove static inlines for ata_bad_scsiop() and ata_bad_cdb() which are no longer used Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 184 ++++++++++++++++++++++++------------- drivers/scsi/libata.h | 10 -- 2 files changed, 121 insertions(+), 73 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index bca9a5016b17..c64169ca7ff0 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -49,6 +49,14 @@ static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + done(cmd); +} + /** * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. * @sdev: SCSI device for which BIOS geometry is to be determined @@ -182,7 +190,6 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; u8 err = 0; - unsigned char *sb = cmd->sense_buffer; /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ @@ -225,8 +232,6 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) }; int i = 0; - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* * Is this an error we can process/parse */ @@ -281,11 +286,9 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) /* Look for best matches first */ if((sense_table[i][0] & err) == sense_table[i][0]) { - sb[0] = 0x70; - sb[2] = sense_table[i][1]; - sb[7] = 0x0a; - sb[12] = sense_table[i][2]; - sb[13] = sense_table[i][3]; + ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, + sense_table[i][2] /* asc */, + sense_table[i][3] /* ascq */ ); return; } i++; @@ -300,11 +303,9 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { if(stat_table[i][0] & drv_stat) { - sb[0] = 0x70; - sb[2] = stat_table[i][1]; - sb[7] = 0x0a; - sb[12] = stat_table[i][2]; - sb[13] = stat_table[i][3]; + ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, + sense_table[i][2] /* asc */, + sense_table[i][3] /* ascq */ ); return; } i++; @@ -313,15 +314,12 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat); /* additional-sense-code[-qualifier] */ - sb[0] = 0x70; - sb[2] = MEDIUM_ERROR; - sb[7] = 0x0A; if (cmd->sc_data_direction == DMA_FROM_DEVICE) { - sb[12] = 0x11; /* "unrecovered read error" */ - sb[13] = 0x04; + ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4); + /* "unrecovered read error" */ } else { - sb[12] = 0x0C; /* "write error - */ - sb[13] = 0x02; /* auto-reallocation failed" */ + ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2); + /* "write error - auto-reallocation failed" */ } } @@ -430,9 +428,9 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, ; /* ignore IMMED bit, violates sat-r05 */ } if (scsicmd[4] & 0x2) - return 1; /* LOEJ bit set not supported */ + goto invalid_fld; /* LOEJ bit set not supported */ if (((scsicmd[4] >> 4) & 0xf) != 0) - return 1; /* power conditions not supported */ + goto invalid_fld; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ @@ -464,6 +462,11 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, */ return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; } @@ -623,20 +626,20 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) else if (scsicmd[0] == VERIFY_16) scsi_16_lba_len(scsicmd, &block, &n_block); else - return 1; + goto invalid_fld; if (!n_block) - return 1; + goto nothing_to_do; if (block >= dev_sectors) - return 1; + goto out_of_range; if ((block + n_block) > dev_sectors) - return 1; + goto out_of_range; if (lba48) { if (n_block > (64 * 1024)) - return 1; + goto invalid_fld; } else { if (n_block > 256) - return 1; + goto invalid_fld; } if (lba) { @@ -679,7 +682,7 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) Head: 0-15 Sector: 1-255*/ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - return 1; + goto out_of_range; tf->command = ATA_CMD_VERIFY; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ @@ -690,6 +693,20 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; } /** @@ -754,7 +771,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) break; default: DPRINTK("no-byte command\n"); - return 1; + goto invalid_fld; } /* Check and compose ATA command */ @@ -764,13 +781,13 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) * However, for ATA R/W commands, sector count 0 means * 256 or 65536 sectors, not 0 sectors as in SCSI. */ - return 1; + goto nothing_to_do; if (lba) { if (lba48) { /* The request -may- be too large for LBA48. */ if ((block >> 48) || (n_block > 65536)) - return 1; + goto out_of_range; tf->hob_nsect = (n_block >> 8) & 0xff; @@ -782,7 +799,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for LBA28. */ if ((block >> 28) || (n_block > 256)) - return 1; + goto out_of_range; tf->device |= (block >> 24) & 0xf; } @@ -801,7 +818,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for CHS addressing. */ if ((block >> 28) || (n_block > 256)) - return 1; + goto out_of_range; /* Convert LBA to CHS */ track = (u32)block / dev->sectors; @@ -817,7 +834,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) Head: 0-15 Sector: 1-255*/ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - return 1; + goto out_of_range; qc->nsect = n_block; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ @@ -828,6 +845,20 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; } static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -859,6 +890,12 @@ static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) * This function sets up an ata_queued_cmd structure for the * SCSI command, and sends that ata_queued_cmd to the hardware. * + * The xlat_func argument (actor) returns 0 if ready to execute + * ATA command, else 1 to finish translation. If 1 is returned + * then cmd->result (and possibly cmd->sense_buffer) are assumed + * to be set reflecting an error condition or clean (early) + * termination. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ @@ -875,7 +912,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc = ata_scsi_qc_new(ap, dev, cmd, done); if (!qc) - return; + goto err_mem; /* data is present; dma-map it */ if (cmd->sc_data_direction == DMA_FROM_DEVICE || @@ -883,7 +920,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); - goto err_out; + goto err_did; } if (cmd->use_sg) @@ -898,19 +935,28 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc->complete_fn = ata_scsi_qc_complete; if (xlat_func(qc, scsicmd)) - goto err_out; + goto early_finish; /* select device, send command to hardware */ if (ata_qc_issue(qc)) - goto err_out; + goto err_did; VPRINTK("EXIT\n"); return; -err_out: +early_finish: + ata_qc_free(qc); + done(cmd); + DPRINTK("EXIT - early finish (good or error)\n"); + return; + +err_did: ata_qc_free(qc); - ata_bad_cdb(cmd, done); - DPRINTK("EXIT - badcmd\n"); +err_mem: + cmd->result = (DID_ERROR << 16); + done(cmd); + DPRINTK("EXIT - internal\n"); + return; } /** @@ -977,7 +1023,8 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) * Mapping the response buffer, calling the command's handler, * and handling the handler's return value. This return value * indicates whether the handler wishes the SCSI command to be - * completed successfully, or not. + * completed successfully (0), or not (in which case cmd->result + * and sense buffer are assumed to be set). * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -996,12 +1043,9 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, rc = actor(args, rbuf, buflen); ata_scsi_rbuf_put(cmd, rbuf); - if (rc) - ata_bad_cdb(cmd, args->done); - else { + if (rc == 0) cmd->result = SAM_STAT_GOOD; - args->done(cmd); - } + args->done(cmd); } /** @@ -1307,8 +1351,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, * in the same manner) */ page_control = scsicmd[2] >> 6; - if ((page_control != 0) && (page_control != 3)) - return 1; + switch (page_control) { + case 0: /* current */ + break; /* supported */ + case 3: /* saved */ + goto saving_not_supp; + case 1: /* changeable */ + case 2: /* defaults */ + default: + goto invalid_fld; + } if (six_byte) output_len = 4; @@ -1339,7 +1391,7 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, break; default: /* invalid page code */ - return 1; + goto invalid_fld; } if (six_byte) { @@ -1352,6 +1404,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, } return 0; + +invalid_fld: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +saving_not_supp: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); + /* "Saving parameters not supported" */ + return 1; } /** @@ -1496,13 +1558,7 @@ void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - cmd->sense_buffer[0] = 0x70; - cmd->sense_buffer[2] = ILLEGAL_REQUEST; - cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */ - cmd->sense_buffer[12] = asc; - cmd->sense_buffer[13] = ascq; + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); done(cmd); } @@ -1871,7 +1927,7 @@ void ata_scsi_simulate(u16 *id, case INQUIRY: if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); else if (scsicmd[2] == 0x00) @@ -1881,7 +1937,7 @@ void ata_scsi_simulate(u16 *id, else if (scsicmd[2] == 0x83) ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case MODE_SENSE: @@ -1891,7 +1947,7 @@ void ata_scsi_simulate(u16 *id, case MODE_SELECT: /* unconditionally return */ case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case READ_CAPACITY: @@ -1902,7 +1958,7 @@ void ata_scsi_simulate(u16 *id, if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case REPORT_LUNS: @@ -1914,7 +1970,9 @@ void ata_scsi_simulate(u16 *id, /* all other commands */ default: - ata_bad_scsiop(cmd, done); + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + done(cmd); break; } } diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 4622e643ffd3..a18f2ac1d4a1 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -86,14 +86,4 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); -static inline void ata_bad_scsiop(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_badcmd(cmd, done, 0x20, 0x00); -} - -static inline void ata_bad_cdb(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_badcmd(cmd, done, 0x24, 0x00); -} - #endif /* __LIBATA_H__ */ -- GitLab From 1fcce839a541ffcd50da99a1bfdfea594be0e3d3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 9 Oct 2005 09:31:33 -0400 Subject: [PATCH 0216/1519] [libata sata_sil24] nit pickings This patch removes unused NR_PORTS macro and adds termination entry to sil24_pci_tbl. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 693330bdc821..dffa13c84639 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -43,8 +43,6 @@ #define DRV_NAME "sata_sil24" #define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */ -#define NR_PORTS 4 - /* * Port request block (PRB) 32 bytes */ @@ -244,6 +242,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, + { } /* terminate list */ }; static struct pci_driver sil24_pci_driver = { -- GitLab From 042c21fd2c3aa553907020131caa553a9da24589 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 9 Oct 2005 09:35:46 -0400 Subject: [PATCH 0217/1519] [libata sata_sil24] add support for 3131/3531 This patch adds support for sil_3131 and sil_3531. Both are identical to 3124 except that they have only one port. Bits 30 and 31 of ata_port_info->host_flags is used to encode available port numbers. Version number is bumped to 0.22. Edward Falk supplied all the necessary information and preliminary patch. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index dffa13c84639..19857814d69f 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -196,6 +196,7 @@ enum { /* board id */ BID_SIL3124 = 0, BID_SIL3132 = 1, + BID_SIL3131 = 2, IRQ_STAT_4PORTS = 0xf, }; @@ -242,6 +243,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, + { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, + { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, { } /* terminate list */ }; @@ -300,13 +303,20 @@ static struct ata_port_operations sil24_ops = { .host_stop = sil24_host_stop, }; +/* + * Use bits 30-31 of host_flags to encode available port numbers. + * Current maxium is 4. + */ +#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) +#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) + static struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA, + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -317,7 +327,18 @@ static struct ata_port_info sil24_port_info[] = { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA, + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2), + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3131/sil_3531 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -665,6 +686,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; unsigned int board_id = (unsigned int)ent->driver_data; + struct ata_port_info *pinfo = &sil24_port_info[board_id]; struct ata_probe_ent *probe_ent = NULL; struct sil24_host_priv *hpriv = NULL; void *host_base = NULL, *port_base = NULL; @@ -705,12 +727,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - probe_ent->sht = sil24_port_info[board_id].sht; - probe_ent->host_flags = sil24_port_info[board_id].host_flags; - probe_ent->pio_mask = sil24_port_info[board_id].pio_mask; - probe_ent->udma_mask = sil24_port_info[board_id].udma_mask; - probe_ent->port_ops = sil24_port_info[board_id].port_ops; - probe_ent->n_ports = (board_id == BID_SIL3124) ? 4 : 2; + probe_ent->sht = pinfo->sht; + probe_ent->host_flags = pinfo->host_flags; + probe_ent->pio_mask = pinfo->pio_mask; + probe_ent->udma_mask = pinfo->udma_mask; + probe_ent->port_ops = pinfo->port_ops; + probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; -- GitLab From e710245bb0f980adfb1dfe850e43761a8117c6be Mon Sep 17 00:00:00 2001 From: Andy Currid Date: Fri, 7 Oct 2005 08:53:39 -0700 Subject: [PATCH 0218/1519] [PATCH] Fix sata_nv handling of NVIDIA MCP51/55 Patch to fix sata_nv handling of NVIDIA MCP51/55 Signed-off-by: Andy Currid Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 749ff92d8c63..9fa2535dd937 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -29,6 +29,8 @@ * NV-specific details such as register offsets, SATA phy location, * hotplug info, etc. * + * 0.09 + * - Fixed bug introduced by 0.08's MCP51 and MCP55 support. * * 0.08 * - Added support for MCP51 and MCP55. @@ -132,9 +134,7 @@ enum nv_host_type GENERIC, NFORCE2, NFORCE3, - CK804, - MCP51, - MCP55 + CK804 }; static struct pci_device_id nv_pci_tbl[] = { @@ -153,13 +153,13 @@ static struct pci_device_id nv_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, -- GitLab From 422fa08e538b649a9b80258950d2f8a202f45f19 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 9 Oct 2005 10:49:34 -0400 Subject: [PATCH 0219/1519] [libata passthru] update ATAPI completion for new error handling --- drivers/scsi/libata-scsi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 698203bf4f69..617534b7a25e 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1933,7 +1933,12 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat); if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) - ata_to_sense_error(qc, drv_stat); + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); -- GitLab From edea3ab58f8edd5f72d31f891ab4f34382e97e3a Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 10 Oct 2005 17:53:58 -0400 Subject: [PATCH 0220/1519] libata: add new driver pdc_adma for PDC ADMA ATA cards --- drivers/scsi/Kconfig | 14 +- drivers/scsi/Makefile | 1 + drivers/scsi/pdc_adma.c | 737 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 749 insertions(+), 3 deletions(-) create mode 100644 drivers/scsi/pdc_adma.c diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index be96cb78e3b5..e2845b442776 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -489,11 +489,11 @@ config SCSI_SATA_NV If unsure, say N. -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" +config SCSI_PDC_ADMA + tristate "Pacific Digital ADMA support" depends on SCSI_SATA && PCI help - This option enables support for Promise Serial ATA TX2/TX4. + This option enables support for Pacific Digital ADMA controllers If unsure, say N. @@ -505,6 +505,14 @@ config SCSI_SATA_QSTOR If unsure, say N. +config SCSI_SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on SCSI_SATA && PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + config SCSI_SATA_SX4 tristate "Promise SATA SX4 support" depends on SCSI_SATA && PCI && EXPERIMENTAL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e2e3d8671930..2d4439826c08 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -138,6 +138,7 @@ obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o +obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c new file mode 100644 index 000000000000..ce006a5b4533 --- /dev/null +++ b/drivers/scsi/pdc_adma.c @@ -0,0 +1,737 @@ +/* + * pdc_adma.c - Pacific Digital Corporation ADMA + * + * Maintained by: Mark Lord + * + * Copyright 2005 Mark Lord + * + * The contents of this file are subject to the Open + * Software License version 1.1 that can be found at + * http://www.opensource.org/licenses/osl-1.1.txt and is included herein + * by reference. + * + * Alternatively, the contents of this file may be used under the terms + * of the GNU General Public License version 2 (the "GPL") as distributed + * in the kernel source COPYING file, in which case the provisions of + * the GPL are applicable instead of the above. If you wish to allow + * the use of your version of this file only under the terms of the + * GPL and not to allow others to use your version of this file under + * the OSL, indicate your decision by deleting the provisions above and + * replace them with the notice and other provisions required by the GPL. + * If you do not delete the provisions above, a recipient may use your + * version of this file under either the OSL or the GPL. + * + * Supports ATA disks in single-packet ADMA mode. + * Uses PIO for everything else. + * + * TODO: Use ADMA transfers for ATAPI devices, when possible. + * This requires careful attention to a number of quirks of the chip. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include +#include + +#define DRV_NAME "pdc_adma" +#define DRV_VERSION "0.01" + +/* macro to calculate base address for ATA regs */ +#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) + +/* macro to calculate base address for ADMA regs */ +#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20)) + +enum { + ADMA_PORTS = 2, + ADMA_CPB_BYTES = 40, + ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16, + ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES, + + ADMA_DMA_BOUNDARY = 0xffffffff, + + /* global register offsets */ + ADMA_MODE_LOCK = 0x00c7, + + /* per-channel register offsets */ + ADMA_CONTROL = 0x0000, /* ADMA control */ + ADMA_STATUS = 0x0002, /* ADMA status */ + ADMA_CPB_COUNT = 0x0004, /* CPB count */ + ADMA_CPB_CURRENT = 0x000c, /* current CPB address */ + ADMA_CPB_NEXT = 0x000c, /* next CPB address */ + ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */ + ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */ + ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */ + + /* ADMA_CONTROL register bits */ + aNIEN = (1 << 8), /* irq mask: 1==masked */ + aGO = (1 << 7), /* packet trigger ("Go!") */ + aRSTADM = (1 << 5), /* ADMA logic reset */ + aAUTEN = (1 << 3), /* packet trigger ("Go!") */ + aRSTA = (1 << 2), /* ATA hard reset */ + aPIOMD4 = 0x0003, /* PIO mode 4 */ + + /* ADMA_STATUS register bits */ + aPSD = (1 << 6), + aUIRQ = (1 << 4), + aPERR = (1 << 0), + + /* CPB bits */ + cDONE = (1 << 0), + cVLD = (1 << 0), + cDAT = (1 << 2), + cIEN = (1 << 3), + + /* PRD bits */ + pORD = (1 << 4), + pDIRO = (1 << 5), + pEND = (1 << 7), + + /* ATA register flags */ + rIGN = (1 << 5), + rEND = (1 << 7), + + /* ATA register addresses */ + ADMA_REGS_CONTROL = 0x0e, + ADMA_REGS_SECTOR_COUNT = 0x12, + ADMA_REGS_LBA_LOW = 0x13, + ADMA_REGS_LBA_MID = 0x14, + ADMA_REGS_LBA_HIGH = 0x15, + ADMA_REGS_DEVICE = 0x16, + ADMA_REGS_COMMAND = 0x17, + + /* PCI device IDs */ + board_1841_idx = 0, /* ADMA 2-port controller */ +}; + +typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t; + +struct adma_port_priv { + u8 *pkt; + dma_addr_t pkt_dma; + adma_state_t state; +}; + +static int adma_ata_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent); +static irqreturn_t adma_intr (int irq, void *dev_instance, + struct pt_regs *regs); +static int adma_port_start(struct ata_port *ap); +static void adma_host_stop(struct ata_host_set *host_set); +static void adma_port_stop(struct ata_port *ap); +static void adma_phy_reset(struct ata_port *ap); +static void adma_qc_prep(struct ata_queued_cmd *qc); +static int adma_qc_issue(struct ata_queued_cmd *qc); +static int adma_check_atapi_dma(struct ata_queued_cmd *qc); +static void adma_bmdma_stop(struct ata_queued_cmd *qc); +static u8 adma_bmdma_status(struct ata_port *ap); +static void adma_irq_clear(struct ata_port *ap); +static void adma_eng_timeout(struct ata_port *ap); + +static Scsi_Host_Template adma_ata_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ENABLE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ADMA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations adma_ata_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .check_atapi_dma = adma_check_atapi_dma, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .phy_reset = adma_phy_reset, + .qc_prep = adma_qc_prep, + .qc_issue = adma_qc_issue, + .eng_timeout = adma_eng_timeout, + .irq_handler = adma_intr, + .irq_clear = adma_irq_clear, + .port_start = adma_port_start, + .port_stop = adma_port_stop, + .host_stop = adma_host_stop, + .bmdma_stop = adma_bmdma_stop, + .bmdma_status = adma_bmdma_status, +}; + +static struct ata_port_info adma_port_info[] = { + /* board_1841_idx */ + { + .sht = &adma_ata_sht, + .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | + ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO, + .pio_mask = 0x10, /* pio4 */ + .udma_mask = 0x1f, /* udma0-4 */ + .port_ops = &adma_ata_ops, + }, +}; + +static struct pci_device_id adma_ata_pci_tbl[] = { + { PCI_VENDOR_ID_PDC, 0x1841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_1841_idx }, + + { } /* terminate list */ +}; + +static struct pci_driver adma_ata_pci_driver = { + .name = DRV_NAME, + .id_table = adma_ata_pci_tbl, + .probe = adma_ata_init_one, + .remove = ata_pci_remove_one, +}; + +static int adma_check_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; /* ATAPI DMA not yet supported */ +} + +static void adma_bmdma_stop(struct ata_queued_cmd *qc) +{ + /* nothing */ +} + +static u8 adma_bmdma_status(struct ata_port *ap) +{ + return 0; +} + +static void adma_irq_clear(struct ata_port *ap) +{ + /* nothing */ +} + +static void adma_reset_engine(void __iomem *chan) +{ + /* reset ADMA to idle state */ + writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL); + udelay(2); + writew(aPIOMD4, chan + ADMA_CONTROL); + udelay(2); +} + +static void adma_reinit_engine(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + void __iomem *mmio_base = ap->host_set->mmio_base; + void __iomem *chan = ADMA_REGS(mmio_base, ap->port_no); + + /* mask/clear ATA interrupts */ + writeb(ATA_NIEN, (void __iomem *)ap->ioaddr.ctl_addr); + ata_check_status(ap); + + /* reset the ADMA engine */ + adma_reset_engine(chan); + + /* set in-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_IN); + + /* set CPB pointer */ + writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT); + + /* set out-FIFO threshold to 0x100 */ + writew(0x100, chan + ADMA_FIFO_OUT); + + /* set CPB count */ + writew(1, chan + ADMA_CPB_COUNT); + + /* read/discard ADMA status */ + readb(chan + ADMA_STATUS); +} + +static inline void adma_enter_reg_mode(struct ata_port *ap) +{ + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + writew(aPIOMD4, chan + ADMA_CONTROL); + readb(chan + ADMA_STATUS); /* flush */ +} + +static void adma_phy_reset(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + pp->state = adma_state_idle; + adma_reinit_engine(ap); + ata_port_probe(ap); + ata_bus_reset(ap); +} + +static void adma_eng_timeout(struct ata_port *ap) +{ + struct adma_port_priv *pp = ap->private_data; + + if (pp->state != adma_state_idle) /* healthy paranoia */ + pp->state = adma_state_mmio; + adma_reinit_engine(ap); + ata_eng_timeout(ap); +} + +static int adma_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg = qc->sg; + struct ata_port *ap = qc->ap; + struct adma_port_priv *pp = ap->private_data; + u8 *buf = pp->pkt; + int nelem, i = (2 + buf[3]) * 8; + u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); + + for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) { + u32 addr; + u32 len; + + addr = (u32)sg_dma_address(sg); + *(__le32 *)(buf + i) = cpu_to_le32(addr); + i += 4; + + len = sg_dma_len(sg) >> 3; + *(__le32 *)(buf + i) = cpu_to_le32(len); + i += 4; + + if ((nelem + 1) == qc->n_elem) + pFLAGS |= pEND; + buf[i++] = pFLAGS; + buf[i++] = qc->dev->dma_mode & 0xf; + buf[i++] = 0; /* pPKLW */ + buf[i++] = 0; /* reserved */ + + *(__le32 *)(buf + i) + = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4); + i += 4; + + VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", nelem, + (unsigned long)addr, len); + } + return i; +} + +static void adma_qc_prep(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + u8 *buf = pp->pkt; + u32 pkt_dma = (u32)pp->pkt_dma; + int i = 0; + + VPRINTK("ENTER\n"); + + adma_enter_reg_mode(qc->ap); + if (qc->tf.protocol != ATA_PROT_DMA) { + ata_qc_prep(qc); + return; + } + + buf[i++] = 0; /* Response flags */ + buf[i++] = 0; /* reserved */ + buf[i++] = cVLD | cDAT | cIEN; + i++; /* cLEN, gets filled in below */ + + *(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */ + i += 4; /* cNCPB */ + i += 4; /* cPRD, gets filled in below */ + + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + buf[i++] = 0; /* reserved */ + + /* ATA registers; must be a multiple of 4 */ + buf[i++] = qc->tf.device; + buf[i++] = ADMA_REGS_DEVICE; + if ((qc->tf.flags & ATA_TFLAG_LBA48)) { + buf[i++] = qc->tf.hob_nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.hob_lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.hob_lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.hob_lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + } + buf[i++] = qc->tf.nsect; + buf[i++] = ADMA_REGS_SECTOR_COUNT; + buf[i++] = qc->tf.lbal; + buf[i++] = ADMA_REGS_LBA_LOW; + buf[i++] = qc->tf.lbam; + buf[i++] = ADMA_REGS_LBA_MID; + buf[i++] = qc->tf.lbah; + buf[i++] = ADMA_REGS_LBA_HIGH; + buf[i++] = 0; + buf[i++] = ADMA_REGS_CONTROL; + buf[i++] = rIGN; + buf[i++] = 0; + buf[i++] = qc->tf.command; + buf[i++] = ADMA_REGS_COMMAND | rEND; + + buf[3] = (i >> 3) - 2; /* cLEN */ + *(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */ + + i = adma_fill_sg(qc); + wmb(); /* flush PRDs and pkt to memory */ +#if 0 + /* dump out CPB + PRDs for debug */ + { + int j, len = 0; + static char obuf[2048]; + for (j = 0; j < i; ++j) { + len += sprintf(obuf+len, "%02x ", buf[j]); + if ((j & 7) == 7) { + printk("%s\n", obuf); + len = 0; + } + } + if (len) + printk("%s\n", obuf); + } +#endif +} + +static inline void adma_packet_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *chan = ADMA_REGS(ap->host_set->mmio_base, ap->port_no); + + VPRINTK("ENTER, ap %p\n", ap); + + /* fire up the ADMA engine */ + writew(aPIOMD4 | aGO | aAUTEN, chan + ADMA_CONTROL); +} + +static int adma_qc_issue(struct ata_queued_cmd *qc) +{ + struct adma_port_priv *pp = qc->ap->private_data; + + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + pp->state = adma_state_pkt; + adma_packet_start(qc); + return 0; + + case ATA_PROT_ATAPI_DMA: + BUG(); + break; + + default: + break; + } + + pp->state = adma_state_mmio; + return ata_qc_issue_prot(qc); +} + +static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + u8 __iomem *mmio_base = host_set->mmio_base; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap = host_set->ports[port_no]; + struct adma_port_priv *pp; + struct ata_queued_cmd *qc; + void __iomem *chan = ADMA_REGS(mmio_base, port_no); + u8 drv_stat, status = readb(chan + ADMA_STATUS); + + if (status == 0) + continue; + handled = 1; + adma_enter_reg_mode(ap); + if ((ap->flags & ATA_FLAG_PORT_DISABLED)) + continue; + pp = ap->private_data; + if (!pp || pp->state != adma_state_pkt) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + drv_stat = 0; + if ((status & (aPERR | aPSD | aUIRQ))) + drv_stat = ATA_ERR; + else if (pp->pkt[0] != cDONE) + drv_stat = ATA_ERR; + ata_qc_complete(qc, drv_stat); + } + return handled; +} + +static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) +{ + unsigned int handled = 0, port_no; + + for (port_no = 0; port_no < host_set->n_ports; ++port_no) { + struct ata_port *ap; + ap = host_set->ports[port_no]; + if (ap && (!(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))) { + struct ata_queued_cmd *qc; + struct adma_port_priv *pp = ap->private_data; + if (!pp || pp->state != adma_state_mmio) + continue; + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + + /* check main status, clearing INTRQ */ + u8 status = ata_chk_status(ap); + if ((status & ATA_BUSY)) + continue; + DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, status); + + /* complete taskfile transaction */ + pp->state = adma_state_idle; + ata_qc_complete(qc, status); + handled = 1; + } + } + } + return handled; +} + +static irqreturn_t adma_intr(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + unsigned int handled = 0; + + VPRINTK("ENTER\n"); + + spin_lock(&host_set->lock); + handled = adma_intr_pkt(host_set) | adma_intr_mmio(host_set); + spin_unlock(&host_set->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static void adma_ata_setup_port(struct ata_ioports *port, unsigned long base) +{ + port->cmd_addr = + port->data_addr = base + 0x000; + port->error_addr = + port->feature_addr = base + 0x004; + port->nsect_addr = base + 0x008; + port->lbal_addr = base + 0x00c; + port->lbam_addr = base + 0x010; + port->lbah_addr = base + 0x014; + port->device_addr = base + 0x018; + port->status_addr = + port->command_addr = base + 0x01c; + port->altstatus_addr = + port->ctl_addr = base + 0x038; +} + +static int adma_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp; + int rc; + + rc = ata_port_start(ap); + if (rc) + return rc; + adma_enter_reg_mode(ap); + rc = -ENOMEM; + pp = kcalloc(1, sizeof(*pp), GFP_KERNEL); + if (!pp) + goto err_out; + pp->pkt = dma_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma, + GFP_KERNEL); + if (!pp->pkt) + goto err_out_kfree; + /* paranoia? */ + if ((pp->pkt_dma & 7) != 0) { + printk("bad alignment for pp->pkt_dma: %08x\n", + (u32)pp->pkt_dma); + goto err_out_kfree2; + } + memset(pp->pkt, 0, ADMA_PKT_BYTES); + ap->private_data = pp; + adma_reinit_engine(ap); + return 0; + +err_out_kfree2: + kfree(pp); +err_out_kfree: + kfree(pp); +err_out: + ata_port_stop(ap); + return rc; +} + +static void adma_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct adma_port_priv *pp = ap->private_data; + + adma_reset_engine(ADMA_REGS(ap->host_set->mmio_base, ap->port_no)); + if (pp != NULL) { + ap->private_data = NULL; + if (pp->pkt != NULL) + dma_free_coherent(dev, ADMA_PKT_BYTES, + pp->pkt, pp->pkt_dma); + kfree(pp); + } + ata_port_stop(ap); +} + +static void adma_host_stop(struct ata_host_set *host_set) +{ + unsigned int port_no; + + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(host_set->mmio_base, port_no)); + + ata_pci_host_stop(host_set); +} + +static void adma_host_init(unsigned int chip_id, + struct ata_probe_ent *probe_ent) +{ + unsigned int port_no; + void __iomem *mmio_base = probe_ent->mmio_base; + + /* enable/lock aGO operation */ + writeb(7, mmio_base + ADMA_MODE_LOCK); + + /* reset the ADMA logic */ + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) + adma_reset_engine(ADMA_REGS(mmio_base, port_no)); +} + +static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base) +{ + int rc; + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME + "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME + "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + return rc; + } + return 0; +} + +static int adma_ata_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + void __iomem *mmio_base; + unsigned int board_idx = (unsigned int) ent->driver_data; + int rc, port_no; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out; + + if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) { + rc = -ENODEV; + goto err_out_regions; + } + + mmio_base = pci_iomap(pdev, 4, 0); + if (mmio_base == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + + rc = adma_set_dma_masks(pdev, mmio_base); + if (rc) + goto err_out_iounmap; + + probe_ent = kcalloc(1, sizeof(*probe_ent), GFP_KERNEL); + if (probe_ent == NULL) { + rc = -ENOMEM; + goto err_out_iounmap; + } + + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = adma_port_info[board_idx].sht; + probe_ent->host_flags = adma_port_info[board_idx].host_flags; + probe_ent->pio_mask = adma_port_info[board_idx].pio_mask; + probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask; + probe_ent->udma_mask = adma_port_info[board_idx].udma_mask; + probe_ent->port_ops = adma_port_info[board_idx].port_ops; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = mmio_base; + probe_ent->n_ports = ADMA_PORTS; + + for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) { + adma_ata_setup_port(&probe_ent->port[port_no], + ADMA_ATA_REGS((unsigned long)mmio_base, port_no)); + } + + pci_set_master(pdev); + + /* initialize adapter */ + adma_host_init(board_idx, probe_ent); + + rc = ata_device_add(probe_ent); + kfree(probe_ent); + if (rc != ADMA_PORTS) + goto err_out_iounmap; + return 0; + +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_regions: + pci_release_regions(pdev); +err_out: + pci_disable_device(pdev); + return rc; +} + +static int __init adma_ata_init(void) +{ + return pci_module_init(&adma_ata_pci_driver); +} + +static void __exit adma_ata_exit(void) +{ + pci_unregister_driver(&adma_ata_pci_driver); +} + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(adma_ata_init); +module_exit(adma_ata_exit); -- GitLab From 68399bb5080c1d96f2110b0a040b39d3ccd7a18a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 11 Oct 2005 01:44:14 -0400 Subject: [PATCH 0221/1519] [libata pdc_adma] license update, minor cleanup from me: change from OSL+GPL to GPL (with approval) from Mark: Gets rid of an unneeded control bit, slightly increasing throughput. --- drivers/scsi/pdc_adma.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index ce006a5b4533..53b8db4be1a9 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -5,21 +5,24 @@ * * Copyright 2005 Mark Lord * - * The contents of this file are subject to the Open - * Software License version 1.1 that can be found at - * http://www.opensource.org/licenses/osl-1.1.txt and is included herein - * by reference. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* * - * Alternatively, the contents of this file may be used under the terms - * of the GNU General Public License version 2 (the "GPL") as distributed - * in the kernel source COPYING file, in which case the provisions of - * the GPL are applicable instead of the above. If you wish to allow - * the use of your version of this file only under the terms of the - * GPL and not to allow others to use your version of this file under - * the OSL, indicate your decision by deleting the provisions above and - * replace them with the notice and other provisions required by the GPL. - * If you do not delete the provisions above, a recipient may use your - * version of this file under either the OSL or the GPL. * * Supports ATA disks in single-packet ADMA mode. * Uses PIO for everything else. @@ -76,7 +79,6 @@ enum { aNIEN = (1 << 8), /* irq mask: 1==masked */ aGO = (1 << 7), /* packet trigger ("Go!") */ aRSTADM = (1 << 5), /* ADMA logic reset */ - aAUTEN = (1 << 3), /* packet trigger ("Go!") */ aRSTA = (1 << 2), /* ATA hard reset */ aPIOMD4 = 0x0003, /* PIO mode 4 */ @@ -415,7 +417,7 @@ static inline void adma_packet_start(struct ata_queued_cmd *qc) VPRINTK("ENTER, ap %p\n", ap); /* fire up the ADMA engine */ - writew(aPIOMD4 | aGO | aAUTEN, chan + ADMA_CONTROL); + writew(aPIOMD4 | aGO, chan + ADMA_CONTROL); } static int adma_qc_issue(struct ata_queued_cmd *qc) -- GitLab From b6a47fd8ff08a9d5cd279cdb8d97a619983575fa Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Tue, 11 Oct 2005 09:06:59 -0500 Subject: [PATCH 0222/1519] JFS: Corrupted block map should not cause trap Replace assert statements with better error handling. Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_dmap.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 51c02bf07878..68000a50ceb6 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -74,7 +74,7 @@ static void dbAllocBits(struct bmap * bmp, struct dmap * dp, s64 blkno, int nblocks); static void dbSplit(dmtree_t * tp, int leafno, int splitsz, int newval); -static void dbBackSplit(dmtree_t * tp, int leafno); +static int dbBackSplit(dmtree_t * tp, int leafno); static int dbJoin(dmtree_t * tp, int leafno, int newval); static void dbAdjTree(dmtree_t * tp, int leafno, int newval); static int dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc, @@ -2466,7 +2466,9 @@ dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc, int level) * that it is at the front of a binary buddy system. */ if (oldval == NOFREE) { - dbBackSplit((dmtree_t *) dcp, leafno); + rc = dbBackSplit((dmtree_t *) dcp, leafno); + if (rc) + return rc; oldval = dcp->stree[ti]; } dbSplit((dmtree_t *) dcp, leafno, dcp->budmin, newval); @@ -2626,7 +2628,7 @@ static void dbSplit(dmtree_t * tp, int leafno, int splitsz, int newval) * * serialization: IREAD_LOCK(ipbmap) or IWRITE_LOCK(ipbmap) held on entry/exit; */ -static void dbBackSplit(dmtree_t * tp, int leafno) +static int dbBackSplit(dmtree_t * tp, int leafno) { int budsz, bud, w, bsz, size; int cursz; @@ -2661,7 +2663,10 @@ static void dbBackSplit(dmtree_t * tp, int leafno) */ for (w = leafno, bsz = budsz;; bsz <<= 1, w = (w < bud) ? w : bud) { - assert(bsz < le32_to_cpu(tp->dmt_nleafs)); + if (bsz >= le32_to_cpu(tp->dmt_nleafs)) { + jfs_err("JFS: block map error in dbBackSplit"); + return -EIO; + } /* determine the buddy. */ @@ -2680,7 +2685,11 @@ static void dbBackSplit(dmtree_t * tp, int leafno) } } - assert(leaf[leafno] == size); + if (leaf[leafno] != size) { + jfs_err("JFS: wrong leaf value in dbBackSplit"); + return -EIO; + } + return 0; } -- GitLab From 0c33aeedb2cf99d877ad9adc7c3df07870f60293 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 26 Sep 2005 11:47:53 -0700 Subject: [PATCH 0223/1519] [IB] Add checks to multicast attach and detach Add checks so that we only allow multicast attach/detach with a valid multicast GID and the correct QP type. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/verbs.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 5081d903e561..72d3ef786db5 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -523,16 +523,22 @@ EXPORT_SYMBOL(ib_dealloc_fmr); int ib_attach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid) { - return qp->device->attach_mcast ? - qp->device->attach_mcast(qp, gid, lid) : - -ENOSYS; + if (!qp->device->attach_mcast) + return -ENOSYS; + if (gid->raw[0] != 0xff || qp->qp_type != IB_QPT_UD) + return -EINVAL; + + return qp->device->attach_mcast(qp, gid, lid); } EXPORT_SYMBOL(ib_attach_mcast); int ib_detach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid) { - return qp->device->detach_mcast ? - qp->device->detach_mcast(qp, gid, lid) : - -ENOSYS; + if (!qp->device->detach_mcast) + return -ENOSYS; + if (gid->raw[0] != 0xff || qp->qp_type != IB_QPT_UD) + return -EINVAL; + + return qp->device->detach_mcast(qp, gid, lid); } EXPORT_SYMBOL(ib_detach_mcast); -- GitLab From 33033b797225553e48ca68d8d8dc5e64ec22e02b Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 26 Sep 2005 12:30:02 -0700 Subject: [PATCH 0224/1519] [IB] mthca: Report correct atomic capability Return correct atomic capability flag from mthca query function. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_dev.h | 1 + drivers/infiniband/hw/mthca/mthca_main.c | 1 + drivers/infiniband/hw/mthca/mthca_provider.c | 2 ++ 3 files changed, 4 insertions(+) diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 7bff5a8425f4..67a2f324a274 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -148,6 +148,7 @@ struct mthca_limits { int reserved_mcgs; int num_pds; int reserved_pds; + u32 flags; u8 port_width_cap; }; diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 23a3f56c7899..576e7fcd053c 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -172,6 +172,7 @@ static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim mdev->limits.reserved_uars = dev_lim->reserved_uars; mdev->limits.reserved_pds = dev_lim->reserved_pds; mdev->limits.port_width_cap = dev_lim->max_port_width; + mdev->limits.flags = dev_lim->flags; /* IB_DEVICE_RESIZE_MAX_WR not supported by driver. May be doable since hardware supports it for SRQ. diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 3f5319a46577..141509dced7e 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -99,6 +99,8 @@ static int mthca_query_device(struct ib_device *ibdev, props->max_qp_rd_atom = 1 << mdev->qp_table.rdb_shift; props->max_qp_init_rd_atom = 1 << mdev->qp_table.rdb_shift; props->local_ca_ack_delay = mdev->limits.local_ca_ack_delay; + props->atomic_cap = mdev->limits.flags & DEV_LIM_FLAG_ATOMIC ? + IB_ATOMIC_HCA : IB_ATOMIC_NONE; err = 0; out: -- GitLab From 6b73597e7062118c0549c2702bfb7d273518c906 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 26 Sep 2005 13:53:25 -0700 Subject: [PATCH 0225/1519] [IB] uverbs: ABI-breaking fixes for userspace verbs Introduce new userspace verbs ABI version 3. This eliminates some unneeded commands, and adds support for user-created completion channels. This cleans up problems with file leaks on error paths, and also makes sure that file descriptors are always installed into the correct process. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs.h | 18 +- drivers/infiniband/core/uverbs_cmd.c | 186 ++++++++-------- drivers/infiniband/core/uverbs_main.c | 292 +++++++++++++------------- include/rdma/ib_user_verbs.h | 58 ++--- 4 files changed, 258 insertions(+), 296 deletions(-) diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index cc124344dd2c..475153e510a9 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -53,14 +53,14 @@ struct ib_uverbs_device { struct cdev dev; struct class_device class_dev; struct ib_device *ib_dev; - int num_comp; + int num_comp_vectors; }; struct ib_uverbs_event_file { struct kref ref; + struct file *file; struct ib_uverbs_file *uverbs_file; spinlock_t lock; - int fd; int is_async; wait_queue_head_t poll_wait; struct fasync_struct *async_queue; @@ -73,8 +73,7 @@ struct ib_uverbs_file { struct ib_uverbs_device *device; struct ib_ucontext *ucontext; struct ib_event_handler event_handler; - struct ib_uverbs_event_file async_file; - struct ib_uverbs_event_file comp_file[1]; + struct ib_uverbs_event_file *async_file; }; struct ib_uverbs_event { @@ -110,10 +109,17 @@ extern struct idr ib_uverbs_cq_idr; extern struct idr ib_uverbs_qp_idr; extern struct idr ib_uverbs_srq_idr; +struct file *ib_uverbs_alloc_event_file(struct ib_uverbs_file *uverbs_file, + int is_async, int *fd); +void ib_uverbs_release_event_file(struct kref *ref); +struct ib_uverbs_event_file *ib_uverbs_lookup_comp_file(int fd); + void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context); void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr); void ib_uverbs_qp_event_handler(struct ib_event *event, void *context_ptr); void ib_uverbs_srq_event_handler(struct ib_event *event, void *context_ptr); +void ib_uverbs_event_handler(struct ib_event_handler *handler, + struct ib_event *event); int ib_umem_get(struct ib_device *dev, struct ib_umem *mem, void *addr, size_t size, int write); @@ -125,16 +131,14 @@ void ib_umem_release_on_close(struct ib_device *dev, struct ib_umem *umem); const char __user *buf, int in_len, \ int out_len) -IB_UVERBS_DECLARE_CMD(query_params); IB_UVERBS_DECLARE_CMD(get_context); IB_UVERBS_DECLARE_CMD(query_device); IB_UVERBS_DECLARE_CMD(query_port); -IB_UVERBS_DECLARE_CMD(query_gid); -IB_UVERBS_DECLARE_CMD(query_pkey); IB_UVERBS_DECLARE_CMD(alloc_pd); IB_UVERBS_DECLARE_CMD(dealloc_pd); IB_UVERBS_DECLARE_CMD(reg_mr); IB_UVERBS_DECLARE_CMD(dereg_mr); +IB_UVERBS_DECLARE_CMD(create_comp_channel); IB_UVERBS_DECLARE_CMD(create_cq); IB_UVERBS_DECLARE_CMD(destroy_cq); IB_UVERBS_DECLARE_CMD(create_qp); diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 562445165d2b..79b60c3dc8d0 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -33,6 +33,8 @@ * $Id: uverbs_cmd.c 2708 2005-06-24 17:27:21Z roland $ */ +#include + #include #include "uverbs.h" @@ -45,29 +47,6 @@ (udata)->outlen = (olen); \ } while (0) -ssize_t ib_uverbs_query_params(struct ib_uverbs_file *file, - const char __user *buf, - int in_len, int out_len) -{ - struct ib_uverbs_query_params cmd; - struct ib_uverbs_query_params_resp resp; - - if (out_len < sizeof resp) - return -ENOSPC; - - if (copy_from_user(&cmd, buf, sizeof cmd)) - return -EFAULT; - - memset(&resp, 0, sizeof resp); - - resp.num_cq_events = file->device->num_comp; - - if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) - return -EFAULT; - - return in_len; -} - ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) @@ -77,7 +56,7 @@ ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file, struct ib_udata udata; struct ib_device *ibdev = file->device->ib_dev; struct ib_ucontext *ucontext; - int i; + struct file *filp; int ret; if (out_len < sizeof resp) @@ -110,26 +89,42 @@ ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file, INIT_LIST_HEAD(&ucontext->srq_list); INIT_LIST_HEAD(&ucontext->ah_list); - resp.async_fd = file->async_file.fd; - for (i = 0; i < file->device->num_comp; ++i) - if (copy_to_user((void __user *) (unsigned long) cmd.cq_fd_tab + - i * sizeof (__u32), - &file->comp_file[i].fd, sizeof (__u32))) { - ret = -EFAULT; - goto err_free; - } + resp.num_comp_vectors = file->device->num_comp_vectors; + + filp = ib_uverbs_alloc_event_file(file, 1, &resp.async_fd); + if (IS_ERR(filp)) { + ret = PTR_ERR(filp); + goto err_free; + } if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_free; + goto err_file; } - file->ucontext = ucontext; + file->async_file = filp->private_data; + + INIT_IB_EVENT_HANDLER(&file->event_handler, file->device->ib_dev, + ib_uverbs_event_handler); + ret = ib_register_event_handler(&file->event_handler); + if (ret) + goto err_file; + + kref_get(&file->async_file->ref); + kref_get(&file->ref); + file->ucontext = ucontext; + + fd_install(resp.async_fd, filp); + up(&file->mutex); return in_len; +err_file: + put_unused_fd(resp.async_fd); + fput(filp); + err_free: ibdev->dealloc_ucontext(ucontext); @@ -255,62 +250,6 @@ ssize_t ib_uverbs_query_port(struct ib_uverbs_file *file, return in_len; } -ssize_t ib_uverbs_query_gid(struct ib_uverbs_file *file, - const char __user *buf, - int in_len, int out_len) -{ - struct ib_uverbs_query_gid cmd; - struct ib_uverbs_query_gid_resp resp; - int ret; - - if (out_len < sizeof resp) - return -ENOSPC; - - if (copy_from_user(&cmd, buf, sizeof cmd)) - return -EFAULT; - - memset(&resp, 0, sizeof resp); - - ret = ib_query_gid(file->device->ib_dev, cmd.port_num, cmd.index, - (union ib_gid *) resp.gid); - if (ret) - return ret; - - if (copy_to_user((void __user *) (unsigned long) cmd.response, - &resp, sizeof resp)) - return -EFAULT; - - return in_len; -} - -ssize_t ib_uverbs_query_pkey(struct ib_uverbs_file *file, - const char __user *buf, - int in_len, int out_len) -{ - struct ib_uverbs_query_pkey cmd; - struct ib_uverbs_query_pkey_resp resp; - int ret; - - if (out_len < sizeof resp) - return -ENOSPC; - - if (copy_from_user(&cmd, buf, sizeof cmd)) - return -EFAULT; - - memset(&resp, 0, sizeof resp); - - ret = ib_query_pkey(file->device->ib_dev, cmd.port_num, cmd.index, - &resp.pkey); - if (ret) - return ret; - - if (copy_to_user((void __user *) (unsigned long) cmd.response, - &resp, sizeof resp)) - return -EFAULT; - - return in_len; -} - ssize_t ib_uverbs_alloc_pd(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) @@ -595,6 +534,35 @@ ssize_t ib_uverbs_dereg_mr(struct ib_uverbs_file *file, return ret ? ret : in_len; } +ssize_t ib_uverbs_create_comp_channel(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_create_comp_channel cmd; + struct ib_uverbs_create_comp_channel_resp resp; + struct file *filp; + + if (out_len < sizeof resp) + return -ENOSPC; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + filp = ib_uverbs_alloc_event_file(file, 0, &resp.fd); + if (IS_ERR(filp)) + return PTR_ERR(filp); + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) { + put_unused_fd(resp.fd); + fput(filp); + return -EFAULT; + } + + fd_install(resp.fd, filp); + return in_len; +} + ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) @@ -603,6 +571,7 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, struct ib_uverbs_create_cq_resp resp; struct ib_udata udata; struct ib_ucq_object *uobj; + struct ib_uverbs_event_file *ev_file = NULL; struct ib_cq *cq; int ret; @@ -616,9 +585,12 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, (unsigned long) cmd.response + sizeof resp, in_len - sizeof cmd, out_len - sizeof resp); - if (cmd.event_handler >= file->device->num_comp) + if (cmd.comp_vector >= file->device->num_comp_vectors) return -EINVAL; + if (cmd.comp_channel >= 0) + ev_file = ib_uverbs_lookup_comp_file(cmd.comp_channel); + uobj = kmalloc(sizeof *uobj, GFP_KERNEL); if (!uobj) return -ENOMEM; @@ -641,7 +613,7 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, cq->uobject = &uobj->uobject; cq->comp_handler = ib_uverbs_comp_handler; cq->event_handler = ib_uverbs_cq_event_handler; - cq->cq_context = file; + cq->cq_context = ev_file; atomic_set(&cq->usecnt, 0); retry: @@ -700,6 +672,7 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, struct ib_uverbs_destroy_cq_resp resp; struct ib_cq *cq; struct ib_ucq_object *uobj; + struct ib_uverbs_event_file *ev_file; struct ib_uverbs_event *evt, *tmp; u64 user_handle; int ret = -EINVAL; @@ -716,7 +689,8 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, goto out; user_handle = cq->uobject->user_handle; - uobj = container_of(cq->uobject, struct ib_ucq_object, uobject); + uobj = container_of(cq->uobject, struct ib_ucq_object, uobject); + ev_file = cq->cq_context; ret = ib_destroy_cq(cq); if (ret) @@ -728,19 +702,23 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->comp_file[0].lock); - list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) { - list_del(&evt->list); - kfree(evt); + if (ev_file) { + spin_lock_irq(&ev_file->lock); + list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) { + list_del(&evt->list); + kfree(evt); + } + spin_unlock_irq(&ev_file->lock); + + kref_put(&ev_file->ref, ib_uverbs_release_event_file); } - spin_unlock_irq(&file->comp_file[0].lock); - spin_lock_irq(&file->async_file.lock); + spin_lock_irq(&file->async_file->lock); list_for_each_entry_safe(evt, tmp, &uobj->async_list, obj_list) { list_del(&evt->list); kfree(evt); } - spin_unlock_irq(&file->async_file.lock); + spin_unlock_irq(&file->async_file->lock); resp.comp_events_reported = uobj->comp_events_reported; resp.async_events_reported = uobj->async_events_reported; @@ -1005,12 +983,12 @@ ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->async_file.lock); + spin_lock_irq(&file->async_file->lock); list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { list_del(&evt->list); kfree(evt); } - spin_unlock_irq(&file->async_file.lock); + spin_unlock_irq(&file->async_file->lock); resp.events_reported = uobj->events_reported; @@ -1243,12 +1221,12 @@ ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->async_file.lock); + spin_lock_irq(&file->async_file->lock); list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { list_del(&evt->list); kfree(evt); } - spin_unlock_irq(&file->async_file.lock); + spin_unlock_irq(&file->async_file->lock); resp.events_reported = uobj->events_reported; diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 12511808de21..e7058fbc607d 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -77,26 +77,24 @@ static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES); static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) = { - [IB_USER_VERBS_CMD_QUERY_PARAMS] = ib_uverbs_query_params, - [IB_USER_VERBS_CMD_GET_CONTEXT] = ib_uverbs_get_context, - [IB_USER_VERBS_CMD_QUERY_DEVICE] = ib_uverbs_query_device, - [IB_USER_VERBS_CMD_QUERY_PORT] = ib_uverbs_query_port, - [IB_USER_VERBS_CMD_QUERY_GID] = ib_uverbs_query_gid, - [IB_USER_VERBS_CMD_QUERY_PKEY] = ib_uverbs_query_pkey, - [IB_USER_VERBS_CMD_ALLOC_PD] = ib_uverbs_alloc_pd, - [IB_USER_VERBS_CMD_DEALLOC_PD] = ib_uverbs_dealloc_pd, - [IB_USER_VERBS_CMD_REG_MR] = ib_uverbs_reg_mr, - [IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr, - [IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq, - [IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq, - [IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp, - [IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp, - [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp, - [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast, - [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast, - [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq, - [IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq, - [IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq, + [IB_USER_VERBS_CMD_GET_CONTEXT] = ib_uverbs_get_context, + [IB_USER_VERBS_CMD_QUERY_DEVICE] = ib_uverbs_query_device, + [IB_USER_VERBS_CMD_QUERY_PORT] = ib_uverbs_query_port, + [IB_USER_VERBS_CMD_ALLOC_PD] = ib_uverbs_alloc_pd, + [IB_USER_VERBS_CMD_DEALLOC_PD] = ib_uverbs_dealloc_pd, + [IB_USER_VERBS_CMD_REG_MR] = ib_uverbs_reg_mr, + [IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr, + [IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL] = ib_uverbs_create_comp_channel, + [IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq, + [IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq, + [IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp, + [IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp, + [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp, + [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast, + [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast, + [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq, + [IB_USER_VERBS_CMD_MODIFY_SRQ] = ib_uverbs_modify_srq, + [IB_USER_VERBS_CMD_DESTROY_SRQ] = ib_uverbs_destroy_srq, }; static struct vfsmount *uverbs_event_mnt; @@ -188,25 +186,19 @@ static ssize_t ib_uverbs_event_read(struct file *filp, char __user *buf, spin_lock_irq(&file->lock); - while (list_empty(&file->event_list) && file->fd >= 0) { + while (list_empty(&file->event_list)) { spin_unlock_irq(&file->lock); if (filp->f_flags & O_NONBLOCK) return -EAGAIN; if (wait_event_interruptible(file->poll_wait, - !list_empty(&file->event_list) || - file->fd < 0)) + !list_empty(&file->event_list))) return -ERESTARTSYS; spin_lock_irq(&file->lock); } - if (file->fd < 0) { - spin_unlock_irq(&file->lock); - return -ENODEV; - } - event = list_entry(file->event_list.next, struct ib_uverbs_event, list); if (file->is_async) @@ -248,26 +240,19 @@ static unsigned int ib_uverbs_event_poll(struct file *filp, poll_wait(filp, &file->poll_wait, wait); spin_lock_irq(&file->lock); - if (file->fd < 0) - pollflags = POLLERR; - else if (!list_empty(&file->event_list)) + if (!list_empty(&file->event_list)) pollflags = POLLIN | POLLRDNORM; spin_unlock_irq(&file->lock); return pollflags; } -static void ib_uverbs_event_release(struct ib_uverbs_event_file *file) +void ib_uverbs_release_event_file(struct kref *ref) { - struct ib_uverbs_event *entry, *tmp; + struct ib_uverbs_event_file *file = + container_of(ref, struct ib_uverbs_event_file, ref); - spin_lock_irq(&file->lock); - if (file->fd != -1) { - file->fd = -1; - list_for_each_entry_safe(entry, tmp, &file->event_list, list) - kfree(entry); - } - spin_unlock_irq(&file->lock); + kfree(file); } static int ib_uverbs_event_fasync(int fd, struct file *filp, int on) @@ -280,21 +265,30 @@ static int ib_uverbs_event_fasync(int fd, struct file *filp, int on) static int ib_uverbs_event_close(struct inode *inode, struct file *filp) { struct ib_uverbs_event_file *file = filp->private_data; + struct ib_uverbs_event *entry, *tmp; + + spin_lock_irq(&file->lock); + file->file = NULL; + list_for_each_entry_safe(entry, tmp, &file->event_list, list) { + if (entry->counter) + list_del(&entry->obj_list); + kfree(entry); + } + spin_unlock_irq(&file->lock); - ib_uverbs_event_release(file); ib_uverbs_event_fasync(-1, filp, 0); - kref_put(&file->uverbs_file->ref, ib_uverbs_release_file); + + if (file->is_async) { + ib_unregister_event_handler(&file->uverbs_file->event_handler); + kref_put(&file->uverbs_file->ref, ib_uverbs_release_file); + } + kref_put(&file->ref, ib_uverbs_release_event_file); return 0; } static struct file_operations uverbs_event_fops = { - /* - * No .owner field since we artificially create event files, - * so there is no increment to the module reference count in - * the open path. All event files come from a uverbs command - * file, which already takes a module reference, so this is OK. - */ + .owner = THIS_MODULE, .read = ib_uverbs_event_read, .poll = ib_uverbs_event_poll, .release = ib_uverbs_event_close, @@ -303,10 +297,19 @@ static struct file_operations uverbs_event_fops = { void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context) { - struct ib_uverbs_file *file = cq_context; - struct ib_ucq_object *uobj; - struct ib_uverbs_event *entry; - unsigned long flags; + struct ib_uverbs_event_file *file = cq_context; + struct ib_ucq_object *uobj; + struct ib_uverbs_event *entry; + unsigned long flags; + + if (!file) + return; + + spin_lock_irqsave(&file->lock, flags); + if (!file->file) { + spin_unlock_irqrestore(&file->lock, flags); + return; + } entry = kmalloc(sizeof *entry, GFP_ATOMIC); if (!entry) @@ -317,13 +320,12 @@ void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context) entry->desc.comp.cq_handle = cq->uobject->user_handle; entry->counter = &uobj->comp_events_reported; - spin_lock_irqsave(&file->comp_file[0].lock, flags); - list_add_tail(&entry->list, &file->comp_file[0].event_list); + list_add_tail(&entry->list, &file->event_list); list_add_tail(&entry->obj_list, &uobj->comp_list); - spin_unlock_irqrestore(&file->comp_file[0].lock, flags); + spin_unlock_irqrestore(&file->lock, flags); - wake_up_interruptible(&file->comp_file[0].poll_wait); - kill_fasync(&file->comp_file[0].async_queue, SIGIO, POLL_IN); + wake_up_interruptible(&file->poll_wait); + kill_fasync(&file->async_queue, SIGIO, POLL_IN); } static void ib_uverbs_async_handler(struct ib_uverbs_file *file, @@ -334,6 +336,12 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, struct ib_uverbs_event *entry; unsigned long flags; + spin_lock_irqsave(&file->async_file->lock, flags); + if (!file->async_file->file) { + spin_unlock_irqrestore(&file->async_file->lock, flags); + return; + } + entry = kmalloc(sizeof *entry, GFP_ATOMIC); if (!entry) return; @@ -342,24 +350,24 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, entry->desc.async.event_type = event; entry->counter = counter; - spin_lock_irqsave(&file->async_file.lock, flags); - list_add_tail(&entry->list, &file->async_file.event_list); + list_add_tail(&entry->list, &file->async_file->event_list); if (obj_list) list_add_tail(&entry->obj_list, obj_list); - spin_unlock_irqrestore(&file->async_file.lock, flags); + spin_unlock_irqrestore(&file->async_file->lock, flags); - wake_up_interruptible(&file->async_file.poll_wait); - kill_fasync(&file->async_file.async_queue, SIGIO, POLL_IN); + wake_up_interruptible(&file->async_file->poll_wait); + kill_fasync(&file->async_file->async_queue, SIGIO, POLL_IN); } void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr) { + struct ib_uverbs_event_file *ev_file = context_ptr; struct ib_ucq_object *uobj; uobj = container_of(event->element.cq->uobject, struct ib_ucq_object, uobject); - ib_uverbs_async_handler(context_ptr, uobj->uobject.user_handle, + ib_uverbs_async_handler(ev_file->uverbs_file, uobj->uobject.user_handle, event->event, &uobj->async_list, &uobj->async_events_reported); @@ -389,8 +397,8 @@ void ib_uverbs_srq_event_handler(struct ib_event *event, void *context_ptr) &uobj->events_reported); } -static void ib_uverbs_event_handler(struct ib_event_handler *handler, - struct ib_event *event) +void ib_uverbs_event_handler(struct ib_event_handler *handler, + struct ib_event *event) { struct ib_uverbs_file *file = container_of(handler, struct ib_uverbs_file, event_handler); @@ -399,38 +407,90 @@ static void ib_uverbs_event_handler(struct ib_event_handler *handler, NULL, NULL); } -static int ib_uverbs_event_init(struct ib_uverbs_event_file *file, - struct ib_uverbs_file *uverbs_file) +struct file *ib_uverbs_alloc_event_file(struct ib_uverbs_file *uverbs_file, + int is_async, int *fd) { + struct ib_uverbs_event_file *ev_file; struct file *filp; + int ret; - spin_lock_init(&file->lock); - INIT_LIST_HEAD(&file->event_list); - init_waitqueue_head(&file->poll_wait); - file->uverbs_file = uverbs_file; - file->async_queue = NULL; - - file->fd = get_unused_fd(); - if (file->fd < 0) - return file->fd; + ev_file = kmalloc(sizeof *ev_file, GFP_KERNEL); + if (!ev_file) + return ERR_PTR(-ENOMEM); + + kref_init(&ev_file->ref); + spin_lock_init(&ev_file->lock); + INIT_LIST_HEAD(&ev_file->event_list); + init_waitqueue_head(&ev_file->poll_wait); + ev_file->uverbs_file = uverbs_file; + ev_file->async_queue = NULL; + ev_file->is_async = is_async; + + *fd = get_unused_fd(); + if (*fd < 0) { + ret = *fd; + goto err; + } filp = get_empty_filp(); if (!filp) { - put_unused_fd(file->fd); - return -ENFILE; + ret = -ENFILE; + goto err_fd; } - filp->f_op = &uverbs_event_fops; + ev_file->file = filp; + + /* + * fops_get() can't fail here, because we're coming from a + * system call on a uverbs file, which will already have a + * module reference. + */ + filp->f_op = fops_get(&uverbs_event_fops); filp->f_vfsmnt = mntget(uverbs_event_mnt); filp->f_dentry = dget(uverbs_event_mnt->mnt_root); filp->f_mapping = filp->f_dentry->d_inode->i_mapping; filp->f_flags = O_RDONLY; filp->f_mode = FMODE_READ; - filp->private_data = file; + filp->private_data = ev_file; - fd_install(file->fd, filp); + return filp; - return 0; +err_fd: + put_unused_fd(*fd); + +err: + kfree(ev_file); + return ERR_PTR(ret); +} + +/* + * Look up a completion event file by FD. If lookup is successful, + * takes a ref to the event file struct that it returns; if + * unsuccessful, returns NULL. + */ +struct ib_uverbs_event_file *ib_uverbs_lookup_comp_file(int fd) +{ + struct ib_uverbs_event_file *ev_file = NULL; + struct file *filp; + + filp = fget(fd); + if (!filp) + return NULL; + + if (filp->f_op != &uverbs_event_fops) + goto out; + + ev_file = filp->private_data; + if (ev_file->is_async) { + ev_file = NULL; + goto out; + } + + kref_get(&ev_file->ref); + +out: + fput(filp); + return ev_file; } static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, @@ -453,8 +513,7 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, !uverbs_cmd_table[hdr.command]) return -EINVAL; - if (!file->ucontext && - hdr.command != IB_USER_VERBS_CMD_QUERY_PARAMS && + if (!file->ucontext && hdr.command != IB_USER_VERBS_CMD_GET_CONTEXT) return -EINVAL; @@ -477,82 +536,33 @@ static int ib_uverbs_open(struct inode *inode, struct file *filp) struct ib_uverbs_device *dev = container_of(inode->i_cdev, struct ib_uverbs_device, dev); struct ib_uverbs_file *file; - int i = 0; - int ret; if (!try_module_get(dev->ib_dev->owner)) return -ENODEV; - file = kmalloc(sizeof *file + - (dev->num_comp - 1) * sizeof (struct ib_uverbs_event_file), - GFP_KERNEL); + file = kmalloc(sizeof *file, GFP_KERNEL); if (!file) { - ret = -ENOMEM; - goto err; + module_put(dev->ib_dev->owner); + return -ENOMEM; } - file->device = dev; + file->device = dev; + file->ucontext = NULL; kref_init(&file->ref); init_MUTEX(&file->mutex); - file->ucontext = NULL; - - kref_get(&file->ref); - ret = ib_uverbs_event_init(&file->async_file, file); - if (ret) - goto err_kref; - - file->async_file.is_async = 1; - - for (i = 0; i < dev->num_comp; ++i) { - kref_get(&file->ref); - ret = ib_uverbs_event_init(&file->comp_file[i], file); - if (ret) - goto err_async; - file->comp_file[i].is_async = 0; - } - - filp->private_data = file; - INIT_IB_EVENT_HANDLER(&file->event_handler, dev->ib_dev, - ib_uverbs_event_handler); - if (ib_register_event_handler(&file->event_handler)) - goto err_async; - return 0; - -err_async: - while (i--) - ib_uverbs_event_release(&file->comp_file[i]); - - ib_uverbs_event_release(&file->async_file); - -err_kref: - /* - * One extra kref_put() because we took a reference before the - * event file creation that failed and got us here. - */ - kref_put(&file->ref, ib_uverbs_release_file); - kref_put(&file->ref, ib_uverbs_release_file); - -err: - module_put(dev->ib_dev->owner); - return ret; } static int ib_uverbs_close(struct inode *inode, struct file *filp) { struct ib_uverbs_file *file = filp->private_data; - int i; - ib_unregister_event_handler(&file->event_handler); - ib_uverbs_event_release(&file->async_file); ib_dealloc_ucontext(file->ucontext); - for (i = 0; i < file->device->num_comp; ++i) - ib_uverbs_event_release(&file->comp_file[i]); - + kref_put(&file->async_file->ref, ib_uverbs_release_event_file); kref_put(&file->ref, ib_uverbs_release_file); return 0; @@ -631,8 +641,8 @@ static void ib_uverbs_add_one(struct ib_device *device) set_bit(uverbs_dev->devnum, dev_map); spin_unlock(&map_lock); - uverbs_dev->ib_dev = device; - uverbs_dev->num_comp = 1; + uverbs_dev->ib_dev = device; + uverbs_dev->num_comp_vectors = 1; if (device->mmap) cdev_init(&uverbs_dev->dev, &uverbs_mmap_fops); diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h index fd85725391a4..0532b78200ca 100644 --- a/include/rdma/ib_user_verbs.h +++ b/include/rdma/ib_user_verbs.h @@ -42,15 +42,12 @@ * Increment this value if any changes that break userspace ABI * compatibility are made. */ -#define IB_USER_VERBS_ABI_VERSION 2 +#define IB_USER_VERBS_ABI_VERSION 3 enum { - IB_USER_VERBS_CMD_QUERY_PARAMS, IB_USER_VERBS_CMD_GET_CONTEXT, IB_USER_VERBS_CMD_QUERY_DEVICE, IB_USER_VERBS_CMD_QUERY_PORT, - IB_USER_VERBS_CMD_QUERY_GID, - IB_USER_VERBS_CMD_QUERY_PKEY, IB_USER_VERBS_CMD_ALLOC_PD, IB_USER_VERBS_CMD_DEALLOC_PD, IB_USER_VERBS_CMD_CREATE_AH, @@ -65,6 +62,7 @@ enum { IB_USER_VERBS_CMD_ALLOC_MW, IB_USER_VERBS_CMD_BIND_MW, IB_USER_VERBS_CMD_DEALLOC_MW, + IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL, IB_USER_VERBS_CMD_CREATE_CQ, IB_USER_VERBS_CMD_RESIZE_CQ, IB_USER_VERBS_CMD_DESTROY_CQ, @@ -118,27 +116,14 @@ struct ib_uverbs_cmd_hdr { __u16 out_words; }; -/* - * No driver_data for "query params" command, since this is intended - * to be a core function with no possible device dependence. - */ -struct ib_uverbs_query_params { - __u64 response; -}; - -struct ib_uverbs_query_params_resp { - __u32 num_cq_events; -}; - struct ib_uverbs_get_context { __u64 response; - __u64 cq_fd_tab; __u64 driver_data[0]; }; struct ib_uverbs_get_context_resp { __u32 async_fd; - __u32 reserved; + __u32 num_comp_vectors; }; struct ib_uverbs_query_device { @@ -220,31 +205,6 @@ struct ib_uverbs_query_port_resp { __u8 reserved[3]; }; -struct ib_uverbs_query_gid { - __u64 response; - __u8 port_num; - __u8 index; - __u8 reserved[6]; - __u64 driver_data[0]; -}; - -struct ib_uverbs_query_gid_resp { - __u8 gid[16]; -}; - -struct ib_uverbs_query_pkey { - __u64 response; - __u8 port_num; - __u8 index; - __u8 reserved[6]; - __u64 driver_data[0]; -}; - -struct ib_uverbs_query_pkey_resp { - __u16 pkey; - __u16 reserved; -}; - struct ib_uverbs_alloc_pd { __u64 response; __u64 driver_data[0]; @@ -278,11 +238,21 @@ struct ib_uverbs_dereg_mr { __u32 mr_handle; }; +struct ib_uverbs_create_comp_channel { + __u64 response; +}; + +struct ib_uverbs_create_comp_channel_resp { + __u32 fd; +}; + struct ib_uverbs_create_cq { __u64 response; __u64 user_handle; __u32 cqe; - __u32 event_handler; + __u32 comp_vector; + __s32 comp_channel; + __u32 reserved; __u64 driver_data[0]; }; -- GitLab From eb9d3cd5ce2828fbb99ed7270089ea152c8f64b3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 27 Sep 2005 15:07:25 -0700 Subject: [PATCH 0226/1519] [IB] uverbs: Fix up resource creation error paths By waiting to add resources to our lists until after the last operation that can fail, we don't have to remove them from their lists in the error path. Also, we should hold the idr mutex until we know whether resource creation has succeed or failed, to avoid someone finding a resource in our table before we're ready. Loosely based on work by Robert Walsh . Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_cmd.c | 111 ++++++++++++--------------- 1 file changed, 50 insertions(+), 61 deletions(-) diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 79b60c3dc8d0..a0ceb1cbed52 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -288,24 +289,20 @@ ssize_t ib_uverbs_alloc_pd(struct ib_uverbs_file *file, pd->uobject = uobj; atomic_set(&pd->usecnt, 0); + down(&ib_uverbs_idr_mutex); + retry: if (!idr_pre_get(&ib_uverbs_pd_idr, GFP_KERNEL)) { ret = -ENOMEM; - goto err_pd; + goto err_up; } - down(&ib_uverbs_idr_mutex); ret = idr_get_new(&ib_uverbs_pd_idr, pd, &uobj->id); - up(&ib_uverbs_idr_mutex); if (ret == -EAGAIN) goto retry; if (ret) - goto err_pd; - - down(&file->mutex); - list_add_tail(&uobj->list, &file->ucontext->pd_list); - up(&file->mutex); + goto err_up; memset(&resp, 0, sizeof resp); resp.pd_handle = uobj->id; @@ -313,21 +310,22 @@ ssize_t ib_uverbs_alloc_pd(struct ib_uverbs_file *file, if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } - return in_len; - -err_list: - down(&file->mutex); - list_del(&uobj->list); + down(&file->mutex); + list_add_tail(&uobj->list, &file->ucontext->pd_list); up(&file->mutex); - down(&ib_uverbs_idr_mutex); - idr_remove(&ib_uverbs_pd_idr, uobj->id); up(&ib_uverbs_idr_mutex); -err_pd: + return in_len; + +err_idr: + idr_remove(&ib_uverbs_pd_idr, uobj->id); + +err_up: + up(&ib_uverbs_idr_mutex); ib_dealloc_pd(pd); err: @@ -463,24 +461,22 @@ ssize_t ib_uverbs_reg_mr(struct ib_uverbs_file *file, resp.mr_handle = obj->uobject.id; - down(&file->mutex); - list_add_tail(&obj->uobject.list, &file->ucontext->mr_list); - up(&file->mutex); - if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } + down(&file->mutex); + list_add_tail(&obj->uobject.list, &file->ucontext->mr_list); + up(&file->mutex); + up(&ib_uverbs_idr_mutex); return in_len; -err_list: - down(&file->mutex); - list_del(&obj->uobject.list); - up(&file->mutex); +err_idr: + idr_remove(&ib_uverbs_mr_idr, obj->uobject.id); err_unreg: ib_dereg_mr(mr); @@ -616,24 +612,20 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, cq->cq_context = ev_file; atomic_set(&cq->usecnt, 0); + down(&ib_uverbs_idr_mutex); + retry: if (!idr_pre_get(&ib_uverbs_cq_idr, GFP_KERNEL)) { ret = -ENOMEM; - goto err_cq; + goto err_up; } - down(&ib_uverbs_idr_mutex); ret = idr_get_new(&ib_uverbs_cq_idr, cq, &uobj->uobject.id); - up(&ib_uverbs_idr_mutex); if (ret == -EAGAIN) goto retry; if (ret) - goto err_cq; - - down(&file->mutex); - list_add_tail(&uobj->uobject.list, &file->ucontext->cq_list); - up(&file->mutex); + goto err_up; memset(&resp, 0, sizeof resp); resp.cq_handle = uobj->uobject.id; @@ -642,21 +634,22 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } - return in_len; - -err_list: - down(&file->mutex); - list_del(&uobj->uobject.list); + down(&file->mutex); + list_add_tail(&uobj->uobject.list, &file->ucontext->cq_list); up(&file->mutex); - down(&ib_uverbs_idr_mutex); - idr_remove(&ib_uverbs_cq_idr, uobj->uobject.id); up(&ib_uverbs_idr_mutex); -err_cq: + return in_len; + +err_idr: + idr_remove(&ib_uverbs_cq_idr, uobj->uobject.id); + +err_up: + up(&ib_uverbs_idr_mutex); ib_destroy_cq(cq); err: @@ -837,24 +830,22 @@ ssize_t ib_uverbs_create_qp(struct ib_uverbs_file *file, resp.qp_handle = uobj->uobject.id; - down(&file->mutex); - list_add_tail(&uobj->uobject.list, &file->ucontext->qp_list); - up(&file->mutex); - if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } + down(&file->mutex); + list_add_tail(&uobj->uobject.list, &file->ucontext->qp_list); + up(&file->mutex); + up(&ib_uverbs_idr_mutex); return in_len; -err_list: - down(&file->mutex); - list_del(&uobj->uobject.list); - up(&file->mutex); +err_idr: + idr_remove(&ib_uverbs_qp_idr, uobj->uobject.id); err_destroy: ib_destroy_qp(qp); @@ -1126,24 +1117,22 @@ ssize_t ib_uverbs_create_srq(struct ib_uverbs_file *file, resp.srq_handle = uobj->uobject.id; - down(&file->mutex); - list_add_tail(&uobj->uobject.list, &file->ucontext->srq_list); - up(&file->mutex); - if (copy_to_user((void __user *) (unsigned long) cmd.response, &resp, sizeof resp)) { ret = -EFAULT; - goto err_list; + goto err_idr; } + down(&file->mutex); + list_add_tail(&uobj->uobject.list, &file->ucontext->srq_list); + up(&file->mutex); + up(&ib_uverbs_idr_mutex); return in_len; -err_list: - down(&file->mutex); - list_del(&uobj->uobject.list); - up(&file->mutex); +err_idr: + idr_remove(&ib_uverbs_srq_idr, uobj->uobject.id); err_destroy: ib_destroy_srq(srq); -- GitLab From 274c0891637c44ac71f3ac40be91b43c2318883a Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 29 Sep 2005 14:17:48 -0700 Subject: [PATCH 0227/1519] [IB] uverbs: Add device-specific ABI version attribute Add abi_version attribute to uverbs class devices to allow for ABI versioning of device-specific interfaces. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_main.c | 11 +++++++++++ drivers/infiniband/hw/mthca/mthca_provider.c | 1 + drivers/infiniband/hw/mthca/mthca_user.h | 6 ++++++ include/rdma/ib_verbs.h | 2 ++ 4 files changed, 20 insertions(+) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index e7058fbc607d..c84cc28b60ee 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -598,6 +598,15 @@ static ssize_t show_ibdev(struct class_device *class_dev, char *buf) } static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL); +static ssize_t show_dev_abi_version(struct class_device *class_dev, char *buf) +{ + struct ib_uverbs_device *dev = + container_of(class_dev, struct ib_uverbs_device, class_dev); + + return sprintf(buf, "%d\n", dev->ib_dev->uverbs_abi_ver); +} +static CLASS_DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL); + static void ib_uverbs_release_class_dev(struct class_device *class_dev) { struct ib_uverbs_device *dev = @@ -662,6 +671,8 @@ static void ib_uverbs_add_one(struct ib_device *device) if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_ibdev)) goto err_class; + if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_abi_version)) + goto err_class; ib_set_client_data(device, &uverbs_client, uverbs_dev); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 141509dced7e..939b09dcfe09 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1060,6 +1060,7 @@ int mthca_register_device(struct mthca_dev *dev) strlcpy(dev->ib_dev.name, "mthca%d", IB_DEVICE_NAME_MAX); dev->ib_dev.owner = THIS_MODULE; + dev->ib_dev.uverbs_abi_ver = MTHCA_UVERBS_ABI_VERSION; dev->ib_dev.node_type = IB_NODE_CA; dev->ib_dev.phys_port_cnt = dev->limits.num_ports; dev->ib_dev.dma_device = &dev->pdev->dev; diff --git a/drivers/infiniband/hw/mthca/mthca_user.h b/drivers/infiniband/hw/mthca/mthca_user.h index 41613ec8a04e..bb015c6494c4 100644 --- a/drivers/infiniband/hw/mthca/mthca_user.h +++ b/drivers/infiniband/hw/mthca/mthca_user.h @@ -37,6 +37,12 @@ #include +/* + * Increment this value if any changes that break userspace ABI + * compatibility are made. + */ +#define MTHCA_UVERBS_ABI_VERSION 1 + /* * Make sure that all structs defined in this file remain laid out so * that they pack the same way on 32-bit and 64-bit architectures (to diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index e6f4c9e55df7..d13f25a78192 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -951,6 +951,8 @@ struct ib_device { IB_DEV_UNREGISTERED } reg_state; + int uverbs_abi_ver; + u8 node_type; u8 phys_port_cnt; }; -- GitLab From 9825051e8c81cbd4400333e7cdc04be77a0bab75 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Sat, 1 Oct 2005 13:09:44 -0700 Subject: [PATCH 0228/1519] [IB] mthca: Fill in more fields in query_port method Add code to fill in the bad_pkey_cntr, max_mtu, active_mtu and subnet_timeout fields in mthca_query_port(). Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_provider.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 939b09dcfe09..4e87ad115712 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -152,9 +152,13 @@ static int mthca_query_port(struct ib_device *ibdev, props->gid_tbl_len = to_mdev(ibdev)->limits.gid_table_len; props->max_msg_sz = 0x80000000; props->pkey_tbl_len = to_mdev(ibdev)->limits.pkey_table_len; + props->bad_pkey_cntr = be16_to_cpup((__be16 *) (out_mad->data + 46)); props->qkey_viol_cntr = be16_to_cpup((__be16 *) (out_mad->data + 48)); props->active_width = out_mad->data[31] & 0xf; props->active_speed = out_mad->data[35] >> 4; + props->max_mtu = out_mad->data[41] & 0xf; + props->active_mtu = out_mad->data[36] >> 4; + props->subnet_timeout = out_mad->data[51] & 0x1f; out: kfree(in_mad); -- GitLab From f575394f1de9b4afa4b474f1882c7e2d3b8e51d7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 3 Oct 2005 09:18:02 -0700 Subject: [PATCH 0229/1519] [IB] uverbs: reject invalid memory registration permission flags Reject userspace memory registrations with invalid permission flags: "local write" is required if "remote write" or "remote atomic" is also requested. Pointed out by Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_cmd.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index a0ceb1cbed52..2e959acf2ff1 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -396,6 +396,14 @@ ssize_t ib_uverbs_reg_mr(struct ib_uverbs_file *file, if ((cmd.start & ~PAGE_MASK) != (cmd.hca_va & ~PAGE_MASK)) return -EINVAL; + /* + * Local write permission is required if remote write or + * remote atomic permission is also requested. + */ + if (cmd.access_flags & (IB_ACCESS_REMOTE_ATOMIC | IB_ACCESS_REMOTE_WRITE) && + !(cmd.access_flags & IB_ACCESS_LOCAL_WRITE)) + return -EINVAL; + obj = kmalloc(sizeof *obj, GFP_KERNEL); if (!obj) return -ENOMEM; -- GitLab From 116c0074ecfd6f061570856bec52b691d54dbd3c Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 3 Oct 2005 09:32:33 -0700 Subject: [PATCH 0230/1519] [IB] Check port number in ib_query_port()/ib_modify_port() Check port number before passing query_port or modify_port operations on to device driver. Signed-off-by: Roland Dreier --- drivers/infiniband/core/device.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index d3cf84e01587..5a6e44976405 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -514,6 +514,12 @@ int ib_query_port(struct ib_device *device, u8 port_num, struct ib_port_attr *port_attr) { + if (device->node_type == IB_NODE_SWITCH) { + if (port_num) + return -EINVAL; + } else if (port_num < 1 || port_num > device->phys_port_cnt) + return -EINVAL; + return device->query_port(device, port_num, port_attr); } EXPORT_SYMBOL(ib_query_port); @@ -583,6 +589,12 @@ int ib_modify_port(struct ib_device *device, u8 port_num, int port_modify_mask, struct ib_port_modify *port_modify) { + if (device->node_type == IB_NODE_SWITCH) { + if (port_num) + return -EINVAL; + } else if (port_num < 1 || port_num > device->phys_port_cnt) + return -EINVAL; + return device->modify_port(device, port_num, port_modify_mask, port_modify); } -- GitLab From 90f104da22bbf2e2b8a2136c12fb4e013fccf504 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 6 Oct 2005 13:15:56 -0700 Subject: [PATCH 0231/1519] [IB] mthca: SRQ limit reached events Our hardware supports generating an event when the number of receives posted to a shared receive queue (SRQ) falls below a user-specified limit. Implement mthca_modify_srq() to arm the limit, and add code to handle dispatching SRQ events when they occur. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_dev.h | 2 ++ drivers/infiniband/hw/mthca/mthca_eq.c | 21 +++++++++++++--- drivers/infiniband/hw/mthca/mthca_provider.c | 1 + drivers/infiniband/hw/mthca/mthca_srq.c | 25 +++++++++++++++++++- 4 files changed, 45 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 67a2f324a274..6e18c128af42 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -448,6 +448,8 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn, int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd, struct ib_srq_attr *attr, struct mthca_srq *srq); void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq); +int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, + enum ib_srq_attr_mask attr_mask); void mthca_srq_event(struct mthca_dev *dev, u32 srqn, enum ib_event_type event_type); void mthca_free_srq_wqe(struct mthca_srq *srq, u32 wqe_addr); diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index c81fa8e975ef..f2afdc6c7e60 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -83,7 +83,8 @@ enum { MTHCA_EVENT_TYPE_PATH_MIG = 0x01, MTHCA_EVENT_TYPE_COMM_EST = 0x02, MTHCA_EVENT_TYPE_SQ_DRAINED = 0x03, - MTHCA_EVENT_TYPE_SRQ_LAST_WQE = 0x13, + MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE = 0x13, + MTHCA_EVENT_TYPE_SRQ_LIMIT = 0x14, MTHCA_EVENT_TYPE_CQ_ERROR = 0x04, MTHCA_EVENT_TYPE_WQ_CATAS_ERROR = 0x05, MTHCA_EVENT_TYPE_EEC_CATAS_ERROR = 0x06, @@ -110,8 +111,9 @@ enum { (1ULL << MTHCA_EVENT_TYPE_LOCAL_CATAS_ERROR) | \ (1ULL << MTHCA_EVENT_TYPE_PORT_CHANGE) | \ (1ULL << MTHCA_EVENT_TYPE_ECC_DETECT)) -#define MTHCA_SRQ_EVENT_MASK (1ULL << MTHCA_EVENT_TYPE_SRQ_CATAS_ERROR) | \ - (1ULL << MTHCA_EVENT_TYPE_SRQ_LAST_WQE) +#define MTHCA_SRQ_EVENT_MASK ((1ULL << MTHCA_EVENT_TYPE_SRQ_CATAS_ERROR) | \ + (1ULL << MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE) | \ + (1ULL << MTHCA_EVENT_TYPE_SRQ_LIMIT)) #define MTHCA_CMD_EVENT_MASK (1ULL << MTHCA_EVENT_TYPE_CMD) #define MTHCA_EQ_DB_INC_CI (1 << 24) @@ -141,6 +143,9 @@ struct mthca_eqe { struct { __be32 qpn; } __attribute__((packed)) qp; + struct { + __be32 srqn; + } __attribute__((packed)) srq; struct { __be32 cqn; u32 reserved1; @@ -305,6 +310,16 @@ static int mthca_eq_int(struct mthca_dev *dev, struct mthca_eq *eq) IB_EVENT_SQ_DRAINED); break; + case MTHCA_EVENT_TYPE_SRQ_QP_LAST_WQE: + mthca_qp_event(dev, be32_to_cpu(eqe->event.qp.qpn) & 0xffffff, + IB_EVENT_QP_LAST_WQE_REACHED); + break; + + case MTHCA_EVENT_TYPE_SRQ_LIMIT: + mthca_srq_event(dev, be32_to_cpu(eqe->event.srq.srqn) & 0xffffff, + IB_EVENT_SRQ_LIMIT_REACHED); + break; + case MTHCA_EVENT_TYPE_WQ_CATAS_ERROR: mthca_qp_event(dev, be32_to_cpu(eqe->event.qp.qpn) & 0xffffff, IB_EVENT_QP_FATAL); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 4e87ad115712..53b29a0841bf 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1084,6 +1084,7 @@ int mthca_register_device(struct mthca_dev *dev) if (dev->mthca_flags & MTHCA_FLAG_SRQ) { dev->ib_dev.create_srq = mthca_create_srq; + dev->ib_dev.modify_srq = mthca_modify_srq; dev->ib_dev.destroy_srq = mthca_destroy_srq; if (mthca_is_memfree(dev)) diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index 18998d48c53e..13d2290261d9 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -332,6 +332,29 @@ void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq) mthca_free_mailbox(dev, mailbox); } +int mthca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr, + enum ib_srq_attr_mask attr_mask) +{ + struct mthca_dev *dev = to_mdev(ibsrq->device); + struct mthca_srq *srq = to_msrq(ibsrq); + int ret; + u8 status; + + /* We don't support resizing SRQs (yet?) */ + if (attr_mask & IB_SRQ_MAX_WR) + return -EINVAL; + + if (attr_mask & IB_SRQ_LIMIT) { + ret = mthca_ARM_SRQ(dev, srq->srqn, attr->srq_limit, &status); + if (ret) + return ret; + if (status) + return -EINVAL; + } + + return 0; +} + void mthca_srq_event(struct mthca_dev *dev, u32 srqn, enum ib_event_type event_type) { @@ -354,7 +377,7 @@ void mthca_srq_event(struct mthca_dev *dev, u32 srqn, event.device = &dev->ib_dev; event.event = event_type; - event.element.srq = &srq->ibsrq; + event.element.srq = &srq->ibsrq; srq->ibsrq.event_handler(&event, srq->ibsrq.srq_context); out: -- GitLab From e23d6d2b090658007732770720a44375cba23200 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 6 Oct 2005 13:25:16 -0700 Subject: [PATCH 0232/1519] [IB] mthca: detect SRQ overflow The hardware relies on us keeping one extra work request that never gets used in SRQs. Add checks to the SRQ work request posting functions so that they fail when someone is about to use up that extra work request, rather than when someone uses the very last work request. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_srq.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index 13d2290261d9..e464321a7aa7 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -438,6 +438,14 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr, wqe = get_wqe(srq, ind); next_ind = *wqe_to_link(wqe); + + if (next_ind < 0) { + mthca_err(dev, "SRQ %06x full\n", srq->srqn); + err = -ENOMEM; + *bad_wr = wr; + break; + } + prev_wqe = srq->last; srq->last = wqe; @@ -529,6 +537,13 @@ int mthca_arbel_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr, wqe = get_wqe(srq, ind); next_ind = *wqe_to_link(wqe); + if (next_ind < 0) { + mthca_err(dev, "SRQ %06x full\n", srq->srqn); + err = -ENOMEM; + *bad_wr = wr; + break; + } + ((struct mthca_next_seg *) wqe)->nda_op = cpu_to_be32((next_ind << srq->wqe_shift) | 1); ((struct mthca_next_seg *) wqe)->ee_nds = 0; -- GitLab From 4ab6fb7e5b3d34b65a1c3473d80d9d1a462d3a49 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 6 Oct 2005 13:28:16 -0700 Subject: [PATCH 0233/1519] [IB] Fix leak on MAD initialization failure There is a bug in ib_mad_init_device(): if ib_agent_port_open() fails for a given port, then the current code doesn't call ib_mad_port_close() for that port. Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 45 ++++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 19 deletions(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index a14ca87fda18..af302e830561 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -2683,40 +2683,47 @@ static int ib_mad_port_close(struct ib_device *device, int port_num) static void ib_mad_init_device(struct ib_device *device) { - int num_ports, cur_port, i; + int start, end, i; if (device->node_type == IB_NODE_SWITCH) { - num_ports = 1; - cur_port = 0; + start = 0; + end = 0; } else { - num_ports = device->phys_port_cnt; - cur_port = 1; + start = 1; + end = device->phys_port_cnt; } - for (i = 0; i < num_ports; i++, cur_port++) { - if (ib_mad_port_open(device, cur_port)) { + + for (i = start; i <= end; i++) { + if (ib_mad_port_open(device, i)) { printk(KERN_ERR PFX "Couldn't open %s port %d\n", - device->name, cur_port); - goto error_device_open; + device->name, i); + goto error; } - if (ib_agent_port_open(device, cur_port)) { + if (ib_agent_port_open(device, i)) { printk(KERN_ERR PFX "Couldn't open %s port %d " "for agents\n", - device->name, cur_port); - goto error_device_open; + device->name, i); + goto error_agent; } } return; -error_device_open: - while (i > 0) { - cur_port--; - if (ib_agent_port_close(device, cur_port)) +error_agent: + if (ib_mad_port_close(device, i)) + printk(KERN_ERR PFX "Couldn't close %s port %d\n", + device->name, i); + +error: + i--; + + while (i >= start) { + if (ib_agent_port_close(device, i)) printk(KERN_ERR PFX "Couldn't close %s port %d " "for agents\n", - device->name, cur_port); - if (ib_mad_port_close(device, cur_port)) + device->name, i); + if (ib_mad_port_close(device, i)) printk(KERN_ERR PFX "Couldn't close %s port %d\n", - device->name, cur_port); + device->name, i); i--; } } -- GitLab From efaae8f71f3088cc73c9e5ceabbd314aa82ac768 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 10 Oct 2005 13:48:07 -0700 Subject: [PATCH 0234/1519] [IB] mthca: Better limit checking and reporting Check the sizes of CQs, QPs and SRQs when creating objects, and fail instead of creating too-big queues. Also return real limits instead of just plausible-sounding values from mthca_query_device(). Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_cmd.c | 6 ++++-- drivers/infiniband/hw/mthca/mthca_dev.h | 6 ++++++ drivers/infiniband/hw/mthca/mthca_main.c | 9 +++++++++ drivers/infiniband/hw/mthca/mthca_mcg.c | 4 ---- drivers/infiniband/hw/mthca/mthca_provider.c | 18 +++++++++++++++--- drivers/infiniband/hw/mthca/mthca_qp.c | 6 ++++-- drivers/infiniband/hw/mthca/mthca_srq.c | 3 ++- 7 files changed, 40 insertions(+), 12 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index f6a8ac026557..1bd7dc8f778c 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -933,9 +933,9 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev, goto out; MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_SRQ_SZ_OFFSET); - dev_lim->max_srq_sz = 1 << field; + dev_lim->max_srq_sz = (1 << field) - 1; MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_QP_SZ_OFFSET); - dev_lim->max_qp_sz = 1 << field; + dev_lim->max_qp_sz = (1 << field) - 1; MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_QP_OFFSET); dev_lim->reserved_qps = 1 << (field & 0xf); MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_QP_OFFSET); @@ -1045,6 +1045,8 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev, dev_lim->max_pds, dev_lim->reserved_pds, dev_lim->reserved_uars); mthca_dbg(dev, "Max QP/MCG: %d, reserved MGMs: %d\n", dev_lim->max_pds, dev_lim->reserved_mgms); + mthca_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n", + dev_lim->max_cq_sz, dev_lim->max_qp_sz, dev_lim->max_srq_sz); mthca_dbg(dev, "Flags: %08x\n", dev_lim->flags); diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 6e18c128af42..f106bac0f925 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -83,6 +83,8 @@ enum { /* Arbel FW gives us these, but we need them for Tavor */ MTHCA_MPT_ENTRY_SIZE = 0x40, MTHCA_MTT_SEG_SIZE = 0x40, + + MTHCA_QP_PER_MGM = 4 * (MTHCA_MGM_ENTRY_SIZE / 16 - 2) }; enum { @@ -128,12 +130,16 @@ struct mthca_limits { int num_uars; int max_sg; int num_qps; + int max_wqes; + int max_qp_init_rdma; int reserved_qps; int num_srqs; + int max_srq_wqes; int reserved_srqs; int num_eecs; int reserved_eecs; int num_cqs; + int max_cqes; int reserved_cqs; int num_eqs; int reserved_eqs; diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 576e7fcd053c..7c35abec81ea 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -162,9 +162,18 @@ static int __devinit mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim mdev->limits.pkey_table_len = dev_lim->max_pkeys; mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay; mdev->limits.max_sg = dev_lim->max_sg; + mdev->limits.max_wqes = dev_lim->max_qp_sz; + mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp; mdev->limits.reserved_qps = dev_lim->reserved_qps; + mdev->limits.max_srq_wqes = dev_lim->max_srq_sz; mdev->limits.reserved_srqs = dev_lim->reserved_srqs; mdev->limits.reserved_eecs = dev_lim->reserved_eecs; + /* + * Subtract 1 from the limit because we need to allocate a + * spare CQE so the HCA HW can tell the difference between an + * empty CQ and a full CQ. + */ + mdev->limits.max_cqes = dev_lim->max_cq_sz - 1; mdev->limits.reserved_cqs = dev_lim->reserved_cqs; mdev->limits.reserved_eqs = dev_lim->reserved_eqs; mdev->limits.reserved_mtts = dev_lim->reserved_mtts; diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c index a2707605f4c8..9a0612a9d304 100644 --- a/drivers/infiniband/hw/mthca/mthca_mcg.c +++ b/drivers/infiniband/hw/mthca/mthca_mcg.c @@ -37,10 +37,6 @@ #include "mthca_dev.h" #include "mthca_cmd.h" -enum { - MTHCA_QP_PER_MGM = 4 * (MTHCA_MGM_ENTRY_SIZE / 16 - 2) -}; - struct mthca_mgm { __be32 next_gid_index; u32 reserved[3]; diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 53b29a0841bf..46864d18827d 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -90,17 +90,26 @@ static int mthca_query_device(struct ib_device *ibdev, props->max_mr_size = ~0ull; props->max_qp = mdev->limits.num_qps - mdev->limits.reserved_qps; - props->max_qp_wr = 0xffff; + props->max_qp_wr = mdev->limits.max_wqes; props->max_sge = mdev->limits.max_sg; props->max_cq = mdev->limits.num_cqs - mdev->limits.reserved_cqs; - props->max_cqe = 0xffff; + props->max_cqe = mdev->limits.max_cqes; props->max_mr = mdev->limits.num_mpts - mdev->limits.reserved_mrws; props->max_pd = mdev->limits.num_pds - mdev->limits.reserved_pds; props->max_qp_rd_atom = 1 << mdev->qp_table.rdb_shift; - props->max_qp_init_rd_atom = 1 << mdev->qp_table.rdb_shift; + props->max_qp_init_rd_atom = mdev->limits.max_qp_init_rdma; + props->max_res_rd_atom = props->max_qp_rd_atom * props->max_qp; + props->max_srq = mdev->limits.num_srqs - mdev->limits.reserved_srqs; + props->max_srq_wr = mdev->limits.max_srq_wqes; + props->max_srq_sge = mdev->limits.max_sg; props->local_ca_ack_delay = mdev->limits.local_ca_ack_delay; props->atomic_cap = mdev->limits.flags & DEV_LIM_FLAG_ATOMIC ? IB_ATOMIC_HCA : IB_ATOMIC_NONE; + props->max_pkeys = mdev->limits.pkey_table_len; + props->max_mcast_grp = mdev->limits.num_mgms + mdev->limits.num_amgms; + props->max_mcast_qp_attach = MTHCA_QP_PER_MGM; + props->max_total_mcast_qp_attach = props->max_mcast_qp_attach * + props->max_mcast_grp; err = 0; out: @@ -640,6 +649,9 @@ static struct ib_cq *mthca_create_cq(struct ib_device *ibdev, int entries, int nent; int err; + if (entries < 1 || entries > to_mdev(ibdev)->limits.max_cqes) + return ERR_PTR(-EINVAL); + if (context) { if (ib_copy_from_udata(&ucmd, udata, sizeof ucmd)) return ERR_PTR(-EFAULT); diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 5fa00669f9b8..2ee0a2b0fd4b 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -1112,8 +1112,10 @@ static int mthca_set_qp_size(struct mthca_dev *dev, struct ib_qp_cap *cap, struct mthca_qp *qp) { /* Sanity check QP size before proceeding */ - if (cap->max_send_wr > 65536 || cap->max_recv_wr > 65536 || - cap->max_send_sge > 64 || cap->max_recv_sge > 64) + if (cap->max_send_wr > dev->limits.max_wqes || + cap->max_recv_wr > dev->limits.max_wqes || + cap->max_send_sge > dev->limits.max_sg || + cap->max_recv_sge > dev->limits.max_sg) return -EINVAL; if (mthca_is_memfree(dev)) { diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index e464321a7aa7..64f70aa1b3c0 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -186,7 +186,8 @@ int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd, int err; /* Sanity check SRQ size before proceeding */ - if (attr->max_wr > 16 << 20 || attr->max_sge > 64) + if (attr->max_wr > dev->limits.max_srq_wqes || + attr->max_sge > dev->limits.max_sg) return -EINVAL; srq->max = attr->max_wr; -- GitLab From 5b6810e048435de508ef66aebd6b78db13d651b8 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 11 Oct 2005 11:08:24 -0700 Subject: [PATCH 0235/1519] [IPoIB] Rename ipoib_create_qp() -> ipoib_init_qp() and fix error cleanup ipoib_create_qp() no longer creates IPoIB's QP, so it shouldn't destroy the QP on failure -- that unwinding happens elsewhere, so the current code can cause a double free. While we're at it, the function's name should match what it actually does, so rename it to ipoib_init_qp(). Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 2 +- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 4 ++-- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 9 +++++---- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 4ea1c1ca85bc..6b14bd1c60a0 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -277,7 +277,7 @@ int ipoib_mcast_attach(struct net_device *dev, u16 mlid, int ipoib_mcast_detach(struct net_device *dev, u16 mlid, union ib_gid *mgid); -int ipoib_qp_create(struct net_device *dev); +int ipoib_init_qp(struct net_device *dev); int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca); void ipoib_transport_dev_cleanup(struct net_device *dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index f7440096b5ed..02d0e0006578 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -387,9 +387,9 @@ int ipoib_ib_dev_open(struct net_device *dev) struct ipoib_dev_priv *priv = netdev_priv(dev); int ret; - ret = ipoib_qp_create(dev); + ret = ipoib_init_qp(dev); if (ret) { - ipoib_warn(priv, "ipoib_qp_create returned %d\n", ret); + ipoib_warn(priv, "ipoib_init_qp returned %d\n", ret); return -1; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 79f59d0563ed..b5902a7ec240 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -92,7 +92,7 @@ int ipoib_mcast_detach(struct net_device *dev, u16 mlid, union ib_gid *mgid) return ret; } -int ipoib_qp_create(struct net_device *dev) +int ipoib_init_qp(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); int ret; @@ -149,10 +149,11 @@ int ipoib_qp_create(struct net_device *dev) return 0; out_fail: - ib_destroy_qp(priv->qp); - priv->qp = NULL; + qp_attr.qp_state = IB_QPS_RESET; + if (ib_modify_qp(priv->qp, &qp_attr, IB_QP_STATE)) + ipoib_warn(priv, "Failed to modify QP to RESET state\n"); - return -EINVAL; + return ret; } int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) -- GitLab From 305a7e87055dde2466a855c24ef51a606915d149 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 11 Oct 2005 15:39:38 -0700 Subject: [PATCH 0236/1519] [IB] uverbs: unlock correctly in error paths A couple of functions were missing spin_unlock calls in error paths. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index c84cc28b60ee..3a887006b253 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -312,8 +312,10 @@ void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context) } entry = kmalloc(sizeof *entry, GFP_ATOMIC); - if (!entry) + if (!entry) { + spin_unlock_irqrestore(&file->lock, flags); return; + } uobj = container_of(cq->uobject, struct ib_ucq_object, uobject); @@ -343,8 +345,10 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, } entry = kmalloc(sizeof *entry, GFP_ATOMIC); - if (!entry) + if (!entry) { + spin_unlock_irqrestore(&file->async_file->lock, flags); return; + } entry->desc.async.element = element; entry->desc.async.event_type = event; -- GitLab From 56c202d6e4f542468fe79b8a735cf128898b87fb Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 13 Oct 2005 10:45:02 -0700 Subject: [PATCH 0237/1519] [IB] fail SA queries if device initialization failed If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier --- drivers/infiniband/core/sa_query.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 262618210c1c..a2c4234ca8a3 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -583,10 +583,16 @@ int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, { struct ib_sa_path_query *query; struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); - struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port]; - struct ib_mad_agent *agent = port->agent; + struct ib_sa_port *port; + struct ib_mad_agent *agent; int ret; + if (!sa_dev) + return -ENODEV; + + port = &sa_dev->port[port_num - sa_dev->start_port]; + agent = port->agent; + query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; @@ -685,10 +691,16 @@ int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, { struct ib_sa_service_query *query; struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); - struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port]; - struct ib_mad_agent *agent = port->agent; + struct ib_sa_port *port; + struct ib_mad_agent *agent; int ret; + if (!sa_dev) + return -ENODEV; + + port = &sa_dev->port[port_num - sa_dev->start_port]; + agent = port->agent; + if (method != IB_MGMT_METHOD_GET && method != IB_MGMT_METHOD_SET && method != IB_SA_METHOD_DELETE) @@ -768,10 +780,16 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, { struct ib_sa_mcmember_query *query; struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); - struct ib_sa_port *port = &sa_dev->port[port_num - sa_dev->start_port]; - struct ib_mad_agent *agent = port->agent; + struct ib_sa_port *port; + struct ib_mad_agent *agent; int ret; + if (!sa_dev) + return -ENODEV; + + port = &sa_dev->port[port_num - sa_dev->start_port]; + agent = port->agent; + query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; -- GitLab From 883a99c7024c5763d6d4f22d9239c133893e8d74 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 14 Oct 2005 14:00:58 -0700 Subject: [PATCH 0238/1519] [IB] uverbs: Add a mask of device methods allowed for userspace Give each device a uverbs_cmd_mask, so that a low-level driver can control which methods may be called on behalf of userspace. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_main.c | 3 ++- drivers/infiniband/hw/mthca/mthca_provider.c | 20 ++++++++++++++++++++ include/rdma/ib_verbs.h | 1 + 3 files changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 3a887006b253..6a5e5084db7a 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -514,7 +514,8 @@ static ssize_t ib_uverbs_write(struct file *filp, const char __user *buf, if (hdr.command < 0 || hdr.command >= ARRAY_SIZE(uverbs_cmd_table) || - !uverbs_cmd_table[hdr.command]) + !uverbs_cmd_table[hdr.command] || + !(file->device->ib_dev->uverbs_cmd_mask & (1ull << hdr.command))) return -EINVAL; if (!file->ucontext && diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 46864d18827d..9e911a1ea415 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -37,6 +37,7 @@ */ #include +#include #include #include "mthca_dev.h" @@ -1077,6 +1078,25 @@ int mthca_register_device(struct mthca_dev *dev) dev->ib_dev.owner = THIS_MODULE; dev->ib_dev.uverbs_abi_ver = MTHCA_UVERBS_ABI_VERSION; + dev->ib_dev.uverbs_cmd_mask = + (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | + (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) | + (1ull << IB_USER_VERBS_CMD_QUERY_PORT) | + (1ull << IB_USER_VERBS_CMD_ALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_REG_MR) | + (1ull << IB_USER_VERBS_CMD_DEREG_MR) | + (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) | + (1ull << IB_USER_VERBS_CMD_CREATE_CQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) | + (1ull << IB_USER_VERBS_CMD_CREATE_QP) | + (1ull << IB_USER_VERBS_CMD_MODIFY_QP) | + (1ull << IB_USER_VERBS_CMD_DESTROY_QP) | + (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) | + (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) | + (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) | + (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ); dev->ib_dev.node_type = IB_NODE_CA; dev->ib_dev.phys_port_cnt = dev->limits.num_ports; dev->ib_dev.dma_device = &dev->pdev->dev; diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index d13f25a78192..a5a963cb5676 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -951,6 +951,7 @@ struct ib_device { IB_DEV_UNREGISTERED } reg_state; + u64 uverbs_cmd_mask; int uverbs_abi_ver; u8 node_type; -- GitLab From 91ecd4ae178bed83da4f6a94ced7992e4d7711eb Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 14 Oct 2005 15:21:44 -0700 Subject: [PATCH 0239/1519] [IB] uverbs: Add ABI structures for more commands Add kernel/user ABI structures for marshalling poll CQ, request CQ notification, post send, post receive, post SRQ receive, create AH and destroy AH commands. These commands allow us to support userspace verbs for devices that can't perform these operations directly from userspace (eg the PathScale HCA). Signed-off-by: Roland Dreier --- include/rdma/ib_user_verbs.h | 164 ++++++++++++++++++++++++++++++++++- 1 file changed, 162 insertions(+), 2 deletions(-) diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h index 0532b78200ca..072f3a2edace 100644 --- a/include/rdma/ib_user_verbs.h +++ b/include/rdma/ib_user_verbs.h @@ -1,6 +1,7 @@ /* * Copyright (c) 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Copyright (c) 2005 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -88,8 +89,11 @@ enum { * Make sure that all structs defined in this file remain laid out so * that they pack the same way on 32-bit and 64-bit architectures (to * avoid incompatibility between 32-bit userspace and 64-bit kernels). - * In particular do not use pointer types -- pass pointers in __u64 - * instead. + * Specifically: + * - Do not use pointer types -- pass pointers in __u64 instead. + * - Make sure that any structure larger than 4 bytes is padded to a + * multiple of 8 bytes. Otherwise the structure size will be + * different between 32-bit and 64-bit architectures. */ struct ib_uverbs_async_event_desc { @@ -261,6 +265,41 @@ struct ib_uverbs_create_cq_resp { __u32 cqe; }; +struct ib_uverbs_poll_cq { + __u64 response; + __u32 cq_handle; + __u32 ne; +}; + +struct ib_uverbs_wc { + __u64 wr_id; + __u32 status; + __u32 opcode; + __u32 vendor_err; + __u32 byte_len; + __u32 imm_data; + __u32 qp_num; + __u32 src_qp; + __u32 wc_flags; + __u16 pkey_index; + __u16 slid; + __u8 sl; + __u8 dlid_path_bits; + __u8 port_num; + __u8 reserved; +}; + +struct ib_uverbs_poll_cq_resp { + __u32 count; + __u32 reserved; + struct ib_uverbs_wc wc[0]; +}; + +struct ib_uverbs_req_notify_cq { + __u32 cq_handle; + __u32 solicited_only; +}; + struct ib_uverbs_destroy_cq { __u64 response; __u32 cq_handle; @@ -358,6 +397,127 @@ struct ib_uverbs_destroy_qp_resp { __u32 events_reported; }; +/* + * The ib_uverbs_sge structure isn't used anywhere, since we assume + * the ib_sge structure is packed the same way on 32-bit and 64-bit + * architectures in both kernel and user space. It's just here to + * document the ABI. + */ +struct ib_uverbs_sge { + __u64 addr; + __u32 length; + __u32 lkey; +}; + +struct ib_uverbs_send_wr { + __u64 wr_id; + __u32 num_sge; + __u32 opcode; + __u32 send_flags; + __u32 imm_data; + union { + struct { + __u64 remote_addr; + __u32 rkey; + __u32 reserved; + } rdma; + struct { + __u64 remote_addr; + __u64 compare_add; + __u64 swap; + __u32 rkey; + __u32 reserved; + } atomic; + struct { + __u32 ah; + __u32 remote_qpn; + __u32 remote_qkey; + __u32 reserved; + } ud; + } wr; +}; + +struct ib_uverbs_post_send { + __u64 response; + __u32 qp_handle; + __u32 wr_count; + __u32 sge_count; + __u32 wqe_size; + struct ib_uverbs_send_wr send_wr[0]; +}; + +struct ib_uverbs_post_send_resp { + __u32 bad_wr; +}; + +struct ib_uverbs_recv_wr { + __u64 wr_id; + __u32 num_sge; + __u32 reserved; +}; + +struct ib_uverbs_post_recv { + __u64 response; + __u32 qp_handle; + __u32 wr_count; + __u32 sge_count; + __u32 wqe_size; + struct ib_uverbs_recv_wr recv_wr[0]; +}; + +struct ib_uverbs_post_recv_resp { + __u32 bad_wr; +}; + +struct ib_uverbs_post_srq_recv { + __u64 response; + __u32 srq_handle; + __u32 wr_count; + __u32 sge_count; + __u32 wqe_size; + struct ib_uverbs_recv_wr recv[0]; +}; + +struct ib_uverbs_post_srq_recv_resp { + __u32 bad_wr; +}; + +struct ib_uverbs_global_route { + __u8 dgid[16]; + __u32 flow_label; + __u8 sgid_index; + __u8 hop_limit; + __u8 traffic_class; + __u8 reserved; +}; + +struct ib_uverbs_ah_attr { + struct ib_uverbs_global_route grh; + __u16 dlid; + __u8 sl; + __u8 src_path_bits; + __u8 static_rate; + __u8 is_global; + __u8 port_num; + __u8 reserved; +}; + +struct ib_uverbs_create_ah { + __u64 response; + __u64 user_handle; + __u32 pd_handle; + __u32 reserved; + struct ib_uverbs_ah_attr attr; +}; + +struct ib_uverbs_create_ah_resp { + __u32 ah_handle; +}; + +struct ib_uverbs_destroy_ah { + __u32 ah_handle; +}; + struct ib_uverbs_attach_mcast { __u8 gid[16]; __u32 qp_handle; -- GitLab From 67cdb40ca444c09853ab4d8a41cf547ac26a4de4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 14 Oct 2005 15:26:04 -0700 Subject: [PATCH 0240/1519] [IB] uverbs: Implement more commands Add kernel support for userspace calling poll CQ, request CQ notification, post send, post receive, post SRQ receive, create AH and destroy AH commands. These commands allow us to support userspace verbs for devices that can't perform these operations directly from userspace (eg the PathScale HCA). Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs.h | 8 + drivers/infiniband/core/uverbs_cmd.c | 549 ++++++++++++++++++++++++++ drivers/infiniband/core/uverbs_main.c | 16 +- 3 files changed, 572 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index 475153e510a9..63c8085c0c98 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -3,6 +3,7 @@ * Copyright (c) 2005 Cisco Systems. All rights reserved. * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * Copyright (c) 2005 Voltaire, Inc. All rights reserved. + * Copyright (c) 2005 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -140,10 +141,17 @@ IB_UVERBS_DECLARE_CMD(reg_mr); IB_UVERBS_DECLARE_CMD(dereg_mr); IB_UVERBS_DECLARE_CMD(create_comp_channel); IB_UVERBS_DECLARE_CMD(create_cq); +IB_UVERBS_DECLARE_CMD(poll_cq); +IB_UVERBS_DECLARE_CMD(req_notify_cq); IB_UVERBS_DECLARE_CMD(destroy_cq); IB_UVERBS_DECLARE_CMD(create_qp); IB_UVERBS_DECLARE_CMD(modify_qp); IB_UVERBS_DECLARE_CMD(destroy_qp); +IB_UVERBS_DECLARE_CMD(post_send); +IB_UVERBS_DECLARE_CMD(post_recv); +IB_UVERBS_DECLARE_CMD(post_srq_recv); +IB_UVERBS_DECLARE_CMD(create_ah); +IB_UVERBS_DECLARE_CMD(destroy_ah); IB_UVERBS_DECLARE_CMD(attach_mcast); IB_UVERBS_DECLARE_CMD(detach_mcast); IB_UVERBS_DECLARE_CMD(create_srq); diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 2e959acf2ff1..14583bb6e2c0 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -665,6 +665,93 @@ ssize_t ib_uverbs_create_cq(struct ib_uverbs_file *file, return ret; } +ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_poll_cq cmd; + struct ib_uverbs_poll_cq_resp *resp; + struct ib_cq *cq; + struct ib_wc *wc; + int ret = 0; + int i; + int rsize; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + wc = kmalloc(cmd.ne * sizeof *wc, GFP_KERNEL); + if (!wc) + return -ENOMEM; + + rsize = sizeof *resp + cmd.ne * sizeof(struct ib_uverbs_wc); + resp = kmalloc(rsize, GFP_KERNEL); + if (!resp) { + ret = -ENOMEM; + goto out_wc; + } + + down(&ib_uverbs_idr_mutex); + cq = idr_find(&ib_uverbs_cq_idr, cmd.cq_handle); + if (!cq || cq->uobject->context != file->ucontext) { + ret = -EINVAL; + goto out; + } + + resp->count = ib_poll_cq(cq, cmd.ne, wc); + + for (i = 0; i < resp->count; i++) { + resp->wc[i].wr_id = wc[i].wr_id; + resp->wc[i].status = wc[i].status; + resp->wc[i].opcode = wc[i].opcode; + resp->wc[i].vendor_err = wc[i].vendor_err; + resp->wc[i].byte_len = wc[i].byte_len; + resp->wc[i].imm_data = wc[i].imm_data; + resp->wc[i].qp_num = wc[i].qp_num; + resp->wc[i].src_qp = wc[i].src_qp; + resp->wc[i].wc_flags = wc[i].wc_flags; + resp->wc[i].pkey_index = wc[i].pkey_index; + resp->wc[i].slid = wc[i].slid; + resp->wc[i].sl = wc[i].sl; + resp->wc[i].dlid_path_bits = wc[i].dlid_path_bits; + resp->wc[i].port_num = wc[i].port_num; + } + + if (copy_to_user((void __user *) (unsigned long) cmd.response, resp, rsize)) + ret = -EFAULT; + +out: + up(&ib_uverbs_idr_mutex); + kfree(resp); + +out_wc: + kfree(wc); + return ret ? ret : in_len; +} + +ssize_t ib_uverbs_req_notify_cq(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_req_notify_cq cmd; + struct ib_cq *cq; + int ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + down(&ib_uverbs_idr_mutex); + cq = idr_find(&ib_uverbs_cq_idr, cmd.cq_handle); + if (cq && cq->uobject->context == file->ucontext) { + ib_req_notify_cq(cq, cmd.solicited_only ? + IB_CQ_SOLICITED : IB_CQ_NEXT_COMP); + ret = in_len; + } + up(&ib_uverbs_idr_mutex); + + return ret; +} + ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) @@ -1003,6 +1090,468 @@ ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file, return ret ? ret : in_len; } +ssize_t ib_uverbs_post_send(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_post_send cmd; + struct ib_uverbs_post_send_resp resp; + struct ib_uverbs_send_wr *user_wr; + struct ib_send_wr *wr = NULL, *last, *next, *bad_wr; + struct ib_qp *qp; + int i, sg_ind; + ssize_t ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + if (in_len < sizeof cmd + cmd.wqe_size * cmd.wr_count + + cmd.sge_count * sizeof (struct ib_uverbs_sge)) + return -EINVAL; + + if (cmd.wqe_size < sizeof (struct ib_uverbs_send_wr)) + return -EINVAL; + + user_wr = kmalloc(cmd.wqe_size, GFP_KERNEL); + if (!user_wr) + return -ENOMEM; + + down(&ib_uverbs_idr_mutex); + + qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle); + if (!qp || qp->uobject->context != file->ucontext) + goto out; + + sg_ind = 0; + last = NULL; + for (i = 0; i < cmd.wr_count; ++i) { + if (copy_from_user(user_wr, + buf + sizeof cmd + i * cmd.wqe_size, + cmd.wqe_size)) { + ret = -EFAULT; + goto out; + } + + if (user_wr->num_sge + sg_ind > cmd.sge_count) { + ret = -EINVAL; + goto out; + } + + next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) + + user_wr->num_sge * sizeof (struct ib_sge), + GFP_KERNEL); + if (!next) { + ret = -ENOMEM; + goto out; + } + + if (!last) + wr = next; + else + last->next = next; + last = next; + + next->next = NULL; + next->wr_id = user_wr->wr_id; + next->num_sge = user_wr->num_sge; + next->opcode = user_wr->opcode; + next->send_flags = user_wr->send_flags; + next->imm_data = user_wr->imm_data; + + if (qp->qp_type == IB_QPT_UD) { + next->wr.ud.ah = idr_find(&ib_uverbs_ah_idr, + user_wr->wr.ud.ah); + if (!next->wr.ud.ah) { + ret = -EINVAL; + goto out; + } + next->wr.ud.remote_qpn = user_wr->wr.ud.remote_qpn; + next->wr.ud.remote_qkey = user_wr->wr.ud.remote_qkey; + } else { + switch (next->opcode) { + case IB_WR_RDMA_WRITE: + case IB_WR_RDMA_WRITE_WITH_IMM: + case IB_WR_RDMA_READ: + next->wr.rdma.remote_addr = + user_wr->wr.rdma.remote_addr; + next->wr.rdma.rkey = + user_wr->wr.rdma.rkey; + break; + case IB_WR_ATOMIC_CMP_AND_SWP: + case IB_WR_ATOMIC_FETCH_AND_ADD: + next->wr.atomic.remote_addr = + user_wr->wr.atomic.remote_addr; + next->wr.atomic.compare_add = + user_wr->wr.atomic.compare_add; + next->wr.atomic.swap = user_wr->wr.atomic.swap; + next->wr.atomic.rkey = user_wr->wr.atomic.rkey; + break; + default: + break; + } + } + + if (next->num_sge) { + next->sg_list = (void *) next + + ALIGN(sizeof *next, sizeof (struct ib_sge)); + if (copy_from_user(next->sg_list, + buf + sizeof cmd + + cmd.wr_count * cmd.wqe_size + + sg_ind * sizeof (struct ib_sge), + next->num_sge * sizeof (struct ib_sge))) { + ret = -EFAULT; + goto out; + } + sg_ind += next->num_sge; + } else + next->sg_list = NULL; + } + + resp.bad_wr = 0; + ret = qp->device->post_send(qp, wr, &bad_wr); + if (ret) + for (next = wr; next; next = next->next) { + ++resp.bad_wr; + if (next == bad_wr) + break; + } + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) + ret = -EFAULT; + +out: + up(&ib_uverbs_idr_mutex); + + while (wr) { + next = wr->next; + kfree(wr); + wr = next; + } + + kfree(user_wr); + + return ret ? ret : in_len; +} + +static struct ib_recv_wr *ib_uverbs_unmarshall_recv(const char __user *buf, + int in_len, + u32 wr_count, + u32 sge_count, + u32 wqe_size) +{ + struct ib_uverbs_recv_wr *user_wr; + struct ib_recv_wr *wr = NULL, *last, *next; + int sg_ind; + int i; + int ret; + + if (in_len < wqe_size * wr_count + + sge_count * sizeof (struct ib_uverbs_sge)) + return ERR_PTR(-EINVAL); + + if (wqe_size < sizeof (struct ib_uverbs_recv_wr)) + return ERR_PTR(-EINVAL); + + user_wr = kmalloc(wqe_size, GFP_KERNEL); + if (!user_wr) + return ERR_PTR(-ENOMEM); + + sg_ind = 0; + last = NULL; + for (i = 0; i < wr_count; ++i) { + if (copy_from_user(user_wr, buf + i * wqe_size, + wqe_size)) { + ret = -EFAULT; + goto err; + } + + if (user_wr->num_sge + sg_ind > sge_count) { + ret = -EINVAL; + goto err; + } + + next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) + + user_wr->num_sge * sizeof (struct ib_sge), + GFP_KERNEL); + if (!next) { + ret = -ENOMEM; + goto err; + } + + if (!last) + wr = next; + else + last->next = next; + last = next; + + next->next = NULL; + next->wr_id = user_wr->wr_id; + next->num_sge = user_wr->num_sge; + + if (next->num_sge) { + next->sg_list = (void *) next + + ALIGN(sizeof *next, sizeof (struct ib_sge)); + if (copy_from_user(next->sg_list, + buf + wr_count * wqe_size + + sg_ind * sizeof (struct ib_sge), + next->num_sge * sizeof (struct ib_sge))) { + ret = -EFAULT; + goto err; + } + sg_ind += next->num_sge; + } else + next->sg_list = NULL; + } + + kfree(user_wr); + return wr; + +err: + kfree(user_wr); + + while (wr) { + next = wr->next; + kfree(wr); + wr = next; + } + + return ERR_PTR(ret); +} + +ssize_t ib_uverbs_post_recv(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_post_recv cmd; + struct ib_uverbs_post_recv_resp resp; + struct ib_recv_wr *wr, *next, *bad_wr; + struct ib_qp *qp; + ssize_t ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + wr = ib_uverbs_unmarshall_recv(buf + sizeof cmd, + in_len - sizeof cmd, cmd.wr_count, + cmd.sge_count, cmd.wqe_size); + if (IS_ERR(wr)) + return PTR_ERR(wr); + + down(&ib_uverbs_idr_mutex); + + qp = idr_find(&ib_uverbs_qp_idr, cmd.qp_handle); + if (!qp || qp->uobject->context != file->ucontext) + goto out; + + resp.bad_wr = 0; + ret = qp->device->post_recv(qp, wr, &bad_wr); + if (ret) + for (next = wr; next; next = next->next) { + ++resp.bad_wr; + if (next == bad_wr) + break; + } + + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) + ret = -EFAULT; + +out: + up(&ib_uverbs_idr_mutex); + + while (wr) { + next = wr->next; + kfree(wr); + wr = next; + } + + return ret ? ret : in_len; +} + +ssize_t ib_uverbs_post_srq_recv(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_post_srq_recv cmd; + struct ib_uverbs_post_srq_recv_resp resp; + struct ib_recv_wr *wr, *next, *bad_wr; + struct ib_srq *srq; + ssize_t ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + wr = ib_uverbs_unmarshall_recv(buf + sizeof cmd, + in_len - sizeof cmd, cmd.wr_count, + cmd.sge_count, cmd.wqe_size); + if (IS_ERR(wr)) + return PTR_ERR(wr); + + down(&ib_uverbs_idr_mutex); + + srq = idr_find(&ib_uverbs_srq_idr, cmd.srq_handle); + if (!srq || srq->uobject->context != file->ucontext) + goto out; + + resp.bad_wr = 0; + ret = srq->device->post_srq_recv(srq, wr, &bad_wr); + if (ret) + for (next = wr; next; next = next->next) { + ++resp.bad_wr; + if (next == bad_wr) + break; + } + + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) + ret = -EFAULT; + +out: + up(&ib_uverbs_idr_mutex); + + while (wr) { + next = wr->next; + kfree(wr); + wr = next; + } + + return ret ? ret : in_len; +} + +ssize_t ib_uverbs_create_ah(struct ib_uverbs_file *file, + const char __user *buf, int in_len, + int out_len) +{ + struct ib_uverbs_create_ah cmd; + struct ib_uverbs_create_ah_resp resp; + struct ib_uobject *uobj; + struct ib_pd *pd; + struct ib_ah *ah; + struct ib_ah_attr attr; + int ret; + + if (out_len < sizeof resp) + return -ENOSPC; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + uobj = kmalloc(sizeof *uobj, GFP_KERNEL); + if (!uobj) + return -ENOMEM; + + down(&ib_uverbs_idr_mutex); + + pd = idr_find(&ib_uverbs_pd_idr, cmd.pd_handle); + if (!pd || pd->uobject->context != file->ucontext) { + ret = -EINVAL; + goto err_up; + } + + uobj->user_handle = cmd.user_handle; + uobj->context = file->ucontext; + + attr.dlid = cmd.attr.dlid; + attr.sl = cmd.attr.sl; + attr.src_path_bits = cmd.attr.src_path_bits; + attr.static_rate = cmd.attr.static_rate; + attr.port_num = cmd.attr.port_num; + attr.grh.flow_label = cmd.attr.grh.flow_label; + attr.grh.sgid_index = cmd.attr.grh.sgid_index; + attr.grh.hop_limit = cmd.attr.grh.hop_limit; + attr.grh.traffic_class = cmd.attr.grh.traffic_class; + memcpy(attr.grh.dgid.raw, cmd.attr.grh.dgid, 16); + + ah = ib_create_ah(pd, &attr); + if (IS_ERR(ah)) { + ret = PTR_ERR(ah); + goto err_up; + } + + ah->uobject = uobj; + +retry: + if (!idr_pre_get(&ib_uverbs_ah_idr, GFP_KERNEL)) { + ret = -ENOMEM; + goto err_destroy; + } + + ret = idr_get_new(&ib_uverbs_ah_idr, ah, &uobj->id); + + if (ret == -EAGAIN) + goto retry; + if (ret) + goto err_destroy; + + resp.ah_handle = uobj->id; + + if (copy_to_user((void __user *) (unsigned long) cmd.response, + &resp, sizeof resp)) { + ret = -EFAULT; + goto err_idr; + } + + down(&file->mutex); + list_add_tail(&uobj->list, &file->ucontext->ah_list); + up(&file->mutex); + + up(&ib_uverbs_idr_mutex); + + return in_len; + +err_idr: + idr_remove(&ib_uverbs_ah_idr, uobj->id); + +err_destroy: + ib_destroy_ah(ah); + +err_up: + up(&ib_uverbs_idr_mutex); + + kfree(uobj); + return ret; +} + +ssize_t ib_uverbs_destroy_ah(struct ib_uverbs_file *file, + const char __user *buf, int in_len, int out_len) +{ + struct ib_uverbs_destroy_ah cmd; + struct ib_ah *ah; + struct ib_uobject *uobj; + int ret = -EINVAL; + + if (copy_from_user(&cmd, buf, sizeof cmd)) + return -EFAULT; + + down(&ib_uverbs_idr_mutex); + + ah = idr_find(&ib_uverbs_ah_idr, cmd.ah_handle); + if (!ah || ah->uobject->context != file->ucontext) + goto out; + + uobj = ah->uobject; + + ret = ib_destroy_ah(ah); + if (ret) + goto out; + + idr_remove(&ib_uverbs_ah_idr, cmd.ah_handle); + + down(&file->mutex); + list_del(&uobj->list); + up(&file->mutex); + + kfree(uobj); + +out: + up(&ib_uverbs_idr_mutex); + + return ret ? ret : in_len; +} + ssize_t ib_uverbs_attach_mcast(struct ib_uverbs_file *file, const char __user *buf, int in_len, int out_len) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 6a5e5084db7a..ef2312a9ea76 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -3,6 +3,7 @@ * Copyright (c) 2005 Cisco Systems. All rights reserved. * Copyright (c) 2005 Mellanox Technologies. All rights reserved. * Copyright (c) 2005 Voltaire, Inc. All rights reserved. + * Copyright (c) 2005 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -86,10 +87,17 @@ static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file, [IB_USER_VERBS_CMD_DEREG_MR] = ib_uverbs_dereg_mr, [IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL] = ib_uverbs_create_comp_channel, [IB_USER_VERBS_CMD_CREATE_CQ] = ib_uverbs_create_cq, + [IB_USER_VERBS_CMD_POLL_CQ] = ib_uverbs_poll_cq, + [IB_USER_VERBS_CMD_REQ_NOTIFY_CQ] = ib_uverbs_req_notify_cq, [IB_USER_VERBS_CMD_DESTROY_CQ] = ib_uverbs_destroy_cq, [IB_USER_VERBS_CMD_CREATE_QP] = ib_uverbs_create_qp, [IB_USER_VERBS_CMD_MODIFY_QP] = ib_uverbs_modify_qp, [IB_USER_VERBS_CMD_DESTROY_QP] = ib_uverbs_destroy_qp, + [IB_USER_VERBS_CMD_POST_SEND] = ib_uverbs_post_send, + [IB_USER_VERBS_CMD_POST_RECV] = ib_uverbs_post_recv, + [IB_USER_VERBS_CMD_POST_SRQ_RECV] = ib_uverbs_post_srq_recv, + [IB_USER_VERBS_CMD_CREATE_AH] = ib_uverbs_create_ah, + [IB_USER_VERBS_CMD_DESTROY_AH] = ib_uverbs_destroy_ah, [IB_USER_VERBS_CMD_ATTACH_MCAST] = ib_uverbs_attach_mcast, [IB_USER_VERBS_CMD_DETACH_MCAST] = ib_uverbs_detach_mcast, [IB_USER_VERBS_CMD_CREATE_SRQ] = ib_uverbs_create_srq, @@ -111,7 +119,13 @@ static int ib_dealloc_ucontext(struct ib_ucontext *context) down(&ib_uverbs_idr_mutex); - /* XXX Free AHs */ + list_for_each_entry_safe(uobj, tmp, &context->ah_list, list) { + struct ib_ah *ah = idr_find(&ib_uverbs_ah_idr, uobj->id); + idr_remove(&ib_uverbs_ah_idr, uobj->id); + ib_destroy_ah(ah); + list_del(&uobj->list); + kfree(uobj); + } list_for_each_entry_safe(uobj, tmp, &context->qp_list, list) { struct ib_qp *qp = idr_find(&ib_uverbs_qp_idr, uobj->id); -- GitLab From 595e726a1f28420c5fc7970b1a87cbce77a1cd45 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 17 Oct 2005 15:33:47 -0700 Subject: [PATCH 0241/1519] [IB] merge ucm.h into ucm.c Eliminate ucm.h. Replace ucm_dbg with direct call to printk KERN_ERR. Signed-off-by: Sean Hefty --- drivers/infiniband/core/ucm.c | 62 +++++++++++++++++--------- drivers/infiniband/core/ucm.h | 83 ----------------------------------- 2 files changed, 41 insertions(+), 104 deletions(-) delete mode 100644 drivers/infiniband/core/ucm.h diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index d0f0b0a2edd3..b7470f0fe83b 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -41,19 +41,52 @@ #include #include #include +#include #include -#include "ucm.h" +#include +#include MODULE_AUTHOR("Libor Michalek"); MODULE_DESCRIPTION("InfiniBand userspace Connection Manager access"); MODULE_LICENSE("Dual BSD/GPL"); -static int ucm_debug_level; +struct ib_ucm_file { + struct semaphore mutex; + struct file *filp; -module_param_named(debug_level, ucm_debug_level, int, 0644); -MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0"); + struct list_head ctxs; /* list of active connections */ + struct list_head events; /* list of pending events */ + wait_queue_head_t poll_wait; +}; + +struct ib_ucm_context { + int id; + wait_queue_head_t wait; + atomic_t ref; + int events_reported; + + struct ib_ucm_file *file; + struct ib_cm_id *cm_id; + __u64 uid; + + struct list_head events; /* list of pending events. */ + struct list_head file_list; /* member in file ctx list */ +}; + +struct ib_ucm_event { + struct ib_ucm_context *ctx; + struct list_head file_list; /* member in file event list */ + struct list_head ctx_list; /* member in ctx event list */ + + struct ib_cm_id *cm_id; + struct ib_ucm_event_resp resp; + void *data; + void *info; + int data_len; + int info_len; +}; enum { IB_UCM_MAJOR = 231, @@ -62,17 +95,10 @@ enum { #define IB_UCM_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_MINOR) -#define PFX "UCM: " - -#define ucm_dbg(format, arg...) \ - do { \ - if (ucm_debug_level > 0) \ - printk(KERN_DEBUG PFX format, ## arg); \ - } while (0) - static struct semaphore ctx_id_mutex; static struct idr ctx_id_table; + static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id) { struct ib_ucm_context *ctx; @@ -152,7 +178,6 @@ static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file) goto error; list_add_tail(&ctx->file_list, &file->ctxs); - ucm_dbg("Allocated CM ID <%d>\n", ctx->id); return ctx; error: @@ -1184,9 +1209,6 @@ static ssize_t ib_ucm_write(struct file *filp, const char __user *buf, if (copy_from_user(&hdr, buf, sizeof(hdr))) return -EFAULT; - ucm_dbg("Write. cmd <%d> in <%d> out <%d> len <%Zu>\n", - hdr.cmd, hdr.in, hdr.out, len); - if (hdr.cmd < 0 || hdr.cmd >= ARRAY_SIZE(ucm_cmd_table)) return -EINVAL; @@ -1232,8 +1254,6 @@ static int ib_ucm_open(struct inode *inode, struct file *filp) filp->private_data = file; file->filp = filp; - ucm_dbg("Created struct\n"); - return 0; } @@ -1281,7 +1301,7 @@ static int __init ib_ucm_init(void) result = register_chrdev_region(IB_UCM_DEV, 1, "infiniband_cm"); if (result) { - ucm_dbg("Error <%d> registering dev\n", result); + printk(KERN_ERR "ucm: Error <%d> registering dev\n", result); goto err_chr; } @@ -1289,14 +1309,14 @@ static int __init ib_ucm_init(void) result = cdev_add(&ib_ucm_cdev, IB_UCM_DEV, 1); if (result) { - ucm_dbg("Error <%d> adding cdev\n", result); + printk(KERN_ERR "ucm: Error <%d> adding cdev\n", result); goto err_cdev; } ib_ucm_class = class_create(THIS_MODULE, "infiniband_cm"); if (IS_ERR(ib_ucm_class)) { result = PTR_ERR(ib_ucm_class); - ucm_dbg("Error <%d> creating class\n", result); + printk(KERN_ERR "Error <%d> creating class\n", result); goto err_class; } diff --git a/drivers/infiniband/core/ucm.h b/drivers/infiniband/core/ucm.h deleted file mode 100644 index f46f37bc1201..000000000000 --- a/drivers/infiniband/core/ucm.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright (c) 2005 Topspin Communications. All rights reserved. - * Copyright (c) 2005 Intel Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: ucm.h 2208 2005-04-22 23:24:31Z libor $ - */ - -#ifndef UCM_H -#define UCM_H - -#include -#include -#include -#include - -#include -#include - -struct ib_ucm_file { - struct semaphore mutex; - struct file *filp; - - struct list_head ctxs; /* list of active connections */ - struct list_head events; /* list of pending events */ - wait_queue_head_t poll_wait; -}; - -struct ib_ucm_context { - int id; - wait_queue_head_t wait; - atomic_t ref; - int events_reported; - - struct ib_ucm_file *file; - struct ib_cm_id *cm_id; - __u64 uid; - - struct list_head events; /* list of pending events. */ - struct list_head file_list; /* member in file ctx list */ -}; - -struct ib_ucm_event { - struct ib_ucm_context *ctx; - struct list_head file_list; /* member in file event list */ - struct list_head ctx_list; /* member in ctx event list */ - - struct ib_cm_id *cm_id; - struct ib_ucm_event_resp resp; - void *data; - void *info; - int data_len; - int info_len; -}; - -#endif /* UCM_H */ -- GitLab From 07d357d0cbf89d9980b1769d5444a3c70f000e00 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 17 Oct 2005 15:37:43 -0700 Subject: [PATCH 0242/1519] [IB] CM: bind IDs to a specific device Bind communication identifiers to a device to support device removal. Export per HCA CM devices to userspace. Signed-off-by: Sean Hefty --- drivers/infiniband/core/cm.c | 41 +++++-- drivers/infiniband/core/ucm.c | 218 +++++++++++++++++++++++++--------- include/rdma/ib_cm.h | 10 +- include/rdma/ib_user_cm.h | 10 +- 4 files changed, 202 insertions(+), 77 deletions(-) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 54db6d4831f1..6f747debca90 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -366,9 +366,15 @@ static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv) cur_cm_id_priv = rb_entry(parent, struct cm_id_private, service_node); if ((cur_cm_id_priv->id.service_mask & service_id) == - (service_mask & cur_cm_id_priv->id.service_id)) - return cm_id_priv; - if (service_id < cur_cm_id_priv->id.service_id) + (service_mask & cur_cm_id_priv->id.service_id) && + (cm_id_priv->id.device == cur_cm_id_priv->id.device)) + return cur_cm_id_priv; + + if (cm_id_priv->id.device < cur_cm_id_priv->id.device) + link = &(*link)->rb_left; + else if (cm_id_priv->id.device > cur_cm_id_priv->id.device) + link = &(*link)->rb_right; + else if (service_id < cur_cm_id_priv->id.service_id) link = &(*link)->rb_left; else link = &(*link)->rb_right; @@ -378,7 +384,8 @@ static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv) return NULL; } -static struct cm_id_private * cm_find_listen(__be64 service_id) +static struct cm_id_private * cm_find_listen(struct ib_device *device, + __be64 service_id) { struct rb_node *node = cm.listen_service_table.rb_node; struct cm_id_private *cm_id_priv; @@ -386,9 +393,15 @@ static struct cm_id_private * cm_find_listen(__be64 service_id) while (node) { cm_id_priv = rb_entry(node, struct cm_id_private, service_node); if ((cm_id_priv->id.service_mask & service_id) == - (cm_id_priv->id.service_mask & cm_id_priv->id.service_id)) + cm_id_priv->id.service_id && + (cm_id_priv->id.device == device)) return cm_id_priv; - if (service_id < cm_id_priv->id.service_id) + + if (device < cm_id_priv->id.device) + node = node->rb_left; + else if (device > cm_id_priv->id.device) + node = node->rb_right; + else if (service_id < cm_id_priv->id.service_id) node = node->rb_left; else node = node->rb_right; @@ -523,7 +536,8 @@ static void cm_reject_sidr_req(struct cm_id_private *cm_id_priv, ib_send_cm_sidr_rep(&cm_id_priv->id, ¶m); } -struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler, +struct ib_cm_id *ib_create_cm_id(struct ib_device *device, + ib_cm_handler cm_handler, void *context) { struct cm_id_private *cm_id_priv; @@ -535,6 +549,7 @@ struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler, memset(cm_id_priv, 0, sizeof *cm_id_priv); cm_id_priv->id.state = IB_CM_IDLE; + cm_id_priv->id.device = device; cm_id_priv->id.cm_handler = cm_handler; cm_id_priv->id.context = context; cm_id_priv->id.remote_cm_qpn = 1; @@ -1047,7 +1062,6 @@ static void cm_format_req_event(struct cm_work *work, req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad; param = &work->cm_event.param.req_rcvd; param->listen_id = listen_id; - param->device = cm_id_priv->av.port->mad_agent->device; param->port = cm_id_priv->av.port->port_num; param->primary_path = &work->path[0]; if (req_msg->alt_local_lid) @@ -1226,7 +1240,8 @@ static struct cm_id_private * cm_match_req(struct cm_work *work, } /* Find matching listen request. */ - listen_cm_id_priv = cm_find_listen(req_msg->service_id); + listen_cm_id_priv = cm_find_listen(cm_id_priv->id.device, + req_msg->service_id); if (!listen_cm_id_priv) { spin_unlock_irqrestore(&cm.lock, flags); cm_issue_rej(work->port, work->mad_recv_wc, @@ -1254,7 +1269,7 @@ static int cm_req_handler(struct cm_work *work) req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad; - cm_id = ib_create_cm_id(NULL, NULL); + cm_id = ib_create_cm_id(work->port->cm_dev->device, NULL, NULL); if (IS_ERR(cm_id)) return PTR_ERR(cm_id); @@ -2629,7 +2644,6 @@ static void cm_format_sidr_req_event(struct cm_work *work, param = &work->cm_event.param.sidr_req_rcvd; param->pkey = __be16_to_cpu(sidr_req_msg->pkey); param->listen_id = listen_id; - param->device = work->port->mad_agent->device; param->port = work->port->port_num; work->cm_event.private_data = &sidr_req_msg->private_data; } @@ -2642,7 +2656,7 @@ static int cm_sidr_req_handler(struct cm_work *work) struct ib_wc *wc; unsigned long flags; - cm_id = ib_create_cm_id(NULL, NULL); + cm_id = ib_create_cm_id(work->port->cm_dev->device, NULL, NULL); if (IS_ERR(cm_id)) return PTR_ERR(cm_id); cm_id_priv = container_of(cm_id, struct cm_id_private, id); @@ -2666,7 +2680,8 @@ static int cm_sidr_req_handler(struct cm_work *work) spin_unlock_irqrestore(&cm.lock, flags); goto out; /* Duplicate message. */ } - cur_cm_id_priv = cm_find_listen(sidr_req_msg->service_id); + cur_cm_id_priv = cm_find_listen(cm_id->device, + sidr_req_msg->service_id); if (!cur_cm_id_priv) { rb_erase(&cm_id_priv->sidr_id_node, &cm.remote_sidr_table); spin_unlock_irqrestore(&cm.lock, flags); diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index b7470f0fe83b..d208ea29e07a 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -52,12 +52,20 @@ MODULE_AUTHOR("Libor Michalek"); MODULE_DESCRIPTION("InfiniBand userspace Connection Manager access"); MODULE_LICENSE("Dual BSD/GPL"); +struct ib_ucm_device { + int devnum; + struct cdev dev; + struct class_device class_dev; + struct ib_device *ib_dev; +}; + struct ib_ucm_file { struct semaphore mutex; struct file *filp; + struct ib_ucm_device *device; - struct list_head ctxs; /* list of active connections */ - struct list_head events; /* list of pending events */ + struct list_head ctxs; + struct list_head events; wait_queue_head_t poll_wait; }; @@ -90,14 +98,24 @@ struct ib_ucm_event { enum { IB_UCM_MAJOR = 231, - IB_UCM_MINOR = 255 + IB_UCM_BASE_MINOR = 224, + IB_UCM_MAX_DEVICES = 32 }; -#define IB_UCM_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_MINOR) +#define IB_UCM_BASE_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_BASE_MINOR) -static struct semaphore ctx_id_mutex; -static struct idr ctx_id_table; +static void ib_ucm_add_one(struct ib_device *device); +static void ib_ucm_remove_one(struct ib_device *device); +static struct ib_client ucm_client = { + .name = "ucm", + .add = ib_ucm_add_one, + .remove = ib_ucm_remove_one +}; + +DECLARE_MUTEX(ctx_id_mutex); +DEFINE_IDR(ctx_id_table); +static DECLARE_BITMAP(dev_map, IB_UCM_MAX_DEVICES); static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id) { @@ -184,10 +202,7 @@ static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file) kfree(ctx); return NULL; } -/* - * Event portion of the API, handle CM events - * and allow event polling. - */ + static void ib_ucm_event_path_get(struct ib_ucm_path_rec *upath, struct ib_sa_path_rec *kpath) { @@ -234,6 +249,7 @@ static void ib_ucm_event_req_get(struct ib_ucm_req_event_resp *ureq, ureq->retry_count = kreq->retry_count; ureq->rnr_retry_count = kreq->rnr_retry_count; ureq->srq = kreq->srq; + ureq->port = kreq->port; ib_ucm_event_path_get(&ureq->primary_path, kreq->primary_path); ib_ucm_event_path_get(&ureq->alternate_path, kreq->alternate_path); @@ -320,6 +336,8 @@ static int ib_ucm_event_process(struct ib_cm_event *evt, case IB_CM_SIDR_REQ_RECEIVED: uvt->resp.u.sidr_req_resp.pkey = evt->param.sidr_req_rcvd.pkey; + uvt->resp.u.sidr_req_resp.port = + evt->param.sidr_req_rcvd.port; uvt->data_len = IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE; break; case IB_CM_SIDR_REP_RECEIVED: @@ -412,9 +430,7 @@ static ssize_t ib_ucm_event(struct ib_ucm_file *file, if (copy_from_user(&cmd, inbuf, sizeof(cmd))) return -EFAULT; - /* - * wait - */ + down(&file->mutex); while (list_empty(&file->events)) { @@ -496,7 +512,6 @@ static ssize_t ib_ucm_event(struct ib_ucm_file *file, return result; } - static ssize_t ib_ucm_create_id(struct ib_ucm_file *file, const char __user *inbuf, int in_len, int out_len) @@ -519,29 +534,27 @@ static ssize_t ib_ucm_create_id(struct ib_ucm_file *file, return -ENOMEM; ctx->uid = cmd.uid; - ctx->cm_id = ib_create_cm_id(ib_ucm_event_handler, ctx); + ctx->cm_id = ib_create_cm_id(file->device->ib_dev, + ib_ucm_event_handler, ctx); if (IS_ERR(ctx->cm_id)) { result = PTR_ERR(ctx->cm_id); - goto err; + goto err1; } resp.id = ctx->id; if (copy_to_user((void __user *)(unsigned long)cmd.response, &resp, sizeof(resp))) { result = -EFAULT; - goto err; + goto err2; } - return 0; -err: +err2: + ib_destroy_cm_id(ctx->cm_id); +err1: down(&ctx_id_mutex); idr_remove(&ctx_id_table, ctx->id); up(&ctx_id_mutex); - - if (!IS_ERR(ctx->cm_id)) - ib_destroy_cm_id(ctx->cm_id); - kfree(ctx); return result; } @@ -1253,6 +1266,7 @@ static int ib_ucm_open(struct inode *inode, struct file *filp) filp->private_data = file; file->filp = filp; + file->device = container_of(inode->i_cdev, struct ib_ucm_device, dev); return 0; } @@ -1283,7 +1297,17 @@ static int ib_ucm_close(struct inode *inode, struct file *filp) return 0; } -static struct file_operations ib_ucm_fops = { +static void ib_ucm_release_class_dev(struct class_device *class_dev) +{ + struct ib_ucm_device *dev; + + dev = container_of(class_dev, struct ib_ucm_device, class_dev); + cdev_del(&dev->dev); + clear_bit(dev->devnum, dev_map); + kfree(dev); +} + +static struct file_operations ucm_fops = { .owner = THIS_MODULE, .open = ib_ucm_open, .release = ib_ucm_close, @@ -1291,55 +1315,141 @@ static struct file_operations ib_ucm_fops = { .poll = ib_ucm_poll, }; +static struct class ucm_class = { + .name = "infiniband_cm", + .release = ib_ucm_release_class_dev +}; + +static ssize_t show_dev(struct class_device *class_dev, char *buf) +{ + struct ib_ucm_device *dev; + + dev = container_of(class_dev, struct ib_ucm_device, class_dev); + return print_dev_t(buf, dev->dev.dev); +} +static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL); -static struct class *ib_ucm_class; -static struct cdev ib_ucm_cdev; +static ssize_t show_ibdev(struct class_device *class_dev, char *buf) +{ + struct ib_ucm_device *dev; + + dev = container_of(class_dev, struct ib_ucm_device, class_dev); + return sprintf(buf, "%s\n", dev->ib_dev->name); +} +static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL); -static int __init ib_ucm_init(void) +static void ib_ucm_add_one(struct ib_device *device) { - int result; + struct ib_ucm_device *ucm_dev; - result = register_chrdev_region(IB_UCM_DEV, 1, "infiniband_cm"); - if (result) { - printk(KERN_ERR "ucm: Error <%d> registering dev\n", result); - goto err_chr; - } + if (!device->alloc_ucontext) + return; + + ucm_dev = kmalloc(sizeof *ucm_dev, GFP_KERNEL); + if (!ucm_dev) + return; - cdev_init(&ib_ucm_cdev, &ib_ucm_fops); + memset(ucm_dev, 0, sizeof *ucm_dev); + ucm_dev->ib_dev = device; - result = cdev_add(&ib_ucm_cdev, IB_UCM_DEV, 1); - if (result) { - printk(KERN_ERR "ucm: Error <%d> adding cdev\n", result); + ucm_dev->devnum = find_first_zero_bit(dev_map, IB_UCM_MAX_DEVICES); + if (ucm_dev->devnum >= IB_UCM_MAX_DEVICES) + goto err; + + set_bit(ucm_dev->devnum, dev_map); + + cdev_init(&ucm_dev->dev, &ucm_fops); + ucm_dev->dev.owner = THIS_MODULE; + kobject_set_name(&ucm_dev->dev.kobj, "ucm%d", ucm_dev->devnum); + if (cdev_add(&ucm_dev->dev, IB_UCM_BASE_DEV + ucm_dev->devnum, 1)) + goto err; + + ucm_dev->class_dev.class = &ucm_class; + ucm_dev->class_dev.dev = device->dma_device; + snprintf(ucm_dev->class_dev.class_id, BUS_ID_SIZE, "ucm%d", + ucm_dev->devnum); + if (class_device_register(&ucm_dev->class_dev)) goto err_cdev; - } - ib_ucm_class = class_create(THIS_MODULE, "infiniband_cm"); - if (IS_ERR(ib_ucm_class)) { - result = PTR_ERR(ib_ucm_class); - printk(KERN_ERR "Error <%d> creating class\n", result); + if (class_device_create_file(&ucm_dev->class_dev, + &class_device_attr_dev)) + goto err_class; + if (class_device_create_file(&ucm_dev->class_dev, + &class_device_attr_ibdev)) goto err_class; + + ib_set_client_data(device, &ucm_client, ucm_dev); + return; + +err_class: + class_device_unregister(&ucm_dev->class_dev); +err_cdev: + cdev_del(&ucm_dev->dev); + clear_bit(ucm_dev->devnum, dev_map); +err: + kfree(ucm_dev); + return; +} + +static void ib_ucm_remove_one(struct ib_device *device) +{ + struct ib_ucm_device *ucm_dev = ib_get_client_data(device, &ucm_client); + + if (!ucm_dev) + return; + + class_device_unregister(&ucm_dev->class_dev); +} + +static ssize_t show_abi_version(struct class *class, char *buf) +{ + return sprintf(buf, "%d\n", IB_USER_CM_ABI_VERSION); +} +static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL); + +static int __init ib_ucm_init(void) +{ + int ret; + + ret = register_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES, + "infiniband_cm"); + if (ret) { + printk(KERN_ERR "ucm: couldn't register device number\n"); + goto err; } - class_device_create(ib_ucm_class, IB_UCM_DEV, NULL, "ucm"); + ret = class_register(&ucm_class); + if (ret) { + printk(KERN_ERR "ucm: couldn't create class infiniband_cm\n"); + goto err_chrdev; + } - idr_init(&ctx_id_table); - init_MUTEX(&ctx_id_mutex); + ret = class_create_file(&ucm_class, &class_attr_abi_version); + if (ret) { + printk(KERN_ERR "ucm: couldn't create abi_version attribute\n"); + goto err_class; + } + ret = ib_register_client(&ucm_client); + if (ret) { + printk(KERN_ERR "ucm: couldn't register client\n"); + goto err_class; + } return 0; + err_class: - cdev_del(&ib_ucm_cdev); -err_cdev: - unregister_chrdev_region(IB_UCM_DEV, 1); -err_chr: - return result; + class_unregister(&ucm_class); +err_chrdev: + unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES); +err: + return ret; } static void __exit ib_ucm_cleanup(void) { - class_device_destroy(ib_ucm_class, IB_UCM_DEV); - class_destroy(ib_ucm_class); - cdev_del(&ib_ucm_cdev); - unregister_chrdev_region(IB_UCM_DEV, 1); + ib_unregister_client(&ucm_client); + class_unregister(&ucm_class); + unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES); } module_init(ib_ucm_init); diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h index 5308683c8c41..0a9fcd59eb43 100644 --- a/include/rdma/ib_cm.h +++ b/include/rdma/ib_cm.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2004 Intel Corporation. All rights reserved. + * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved. * Copyright (c) 2004 Topspin Corporation. All rights reserved. * Copyright (c) 2004 Voltaire Corporation. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. @@ -109,7 +109,6 @@ struct ib_cm_id; struct ib_cm_req_event_param { struct ib_cm_id *listen_id; - struct ib_device *device; u8 port; struct ib_sa_path_rec *primary_path; @@ -220,7 +219,6 @@ struct ib_cm_apr_event_param { struct ib_cm_sidr_req_event_param { struct ib_cm_id *listen_id; - struct ib_device *device; u8 port; u16 pkey; }; @@ -284,6 +282,7 @@ typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id, struct ib_cm_id { ib_cm_handler cm_handler; void *context; + struct ib_device *device; __be64 service_id; __be64 service_mask; enum ib_cm_state state; /* internal CM/debug use */ @@ -295,6 +294,8 @@ struct ib_cm_id { /** * ib_create_cm_id - Allocate a communication identifier. + * @device: Device associated with the cm_id. All related communication will + * be associated with the specified device. * @cm_handler: Callback invoked to notify the user of CM events. * @context: User specified context associated with the communication * identifier. @@ -302,7 +303,8 @@ struct ib_cm_id { * Communication identifiers are used to track connection states, service * ID resolution requests, and listen requests. */ -struct ib_cm_id *ib_create_cm_id(ib_cm_handler cm_handler, +struct ib_cm_id *ib_create_cm_id(struct ib_device *device, + ib_cm_handler cm_handler, void *context); /** diff --git a/include/rdma/ib_user_cm.h b/include/rdma/ib_user_cm.h index e4d1654276ad..3037588b8464 100644 --- a/include/rdma/ib_user_cm.h +++ b/include/rdma/ib_user_cm.h @@ -38,7 +38,7 @@ #include -#define IB_USER_CM_ABI_VERSION 2 +#define IB_USER_CM_ABI_VERSION 3 enum { IB_USER_CM_CMD_CREATE_ID, @@ -299,8 +299,6 @@ struct ib_ucm_event_get { }; struct ib_ucm_req_event_resp { - /* device */ - /* port */ struct ib_ucm_path_rec primary_path; struct ib_ucm_path_rec alternate_path; __be64 remote_ca_guid; @@ -316,6 +314,7 @@ struct ib_ucm_req_event_resp { __u8 retry_count; __u8 rnr_retry_count; __u8 srq; + __u8 port; }; struct ib_ucm_rep_event_resp { @@ -353,10 +352,9 @@ struct ib_ucm_apr_event_resp { }; struct ib_ucm_sidr_req_event_resp { - /* device */ - /* port */ __u16 pkey; - __u8 reserved[2]; + __u8 port; + __u8 reserved; }; struct ib_ucm_sidr_rep_event_resp { -- GitLab From 762a03e21ed08daa5170d9cd98e83539861e7692 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 17 Oct 2005 15:38:50 -0700 Subject: [PATCH 0243/1519] [IB] ucm: quiet sparse warnings Make ctx_id_mutex and ctx_id_table static to quiet sparse warnings. Signed-off-by: Roland Dreier --- drivers/infiniband/core/ucm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index d208ea29e07a..02ca642089bd 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -113,8 +113,8 @@ static struct ib_client ucm_client = { .remove = ib_ucm_remove_one }; -DECLARE_MUTEX(ctx_id_mutex); -DEFINE_IDR(ctx_id_table); +static DECLARE_MUTEX(ctx_id_mutex); +static DEFINE_IDR(ctx_id_table); static DECLARE_BITMAP(dev_map, IB_UCM_MAX_DEVICES); static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id) -- GitLab From 4b2d319b53810ab00ef3d8fdfc1c1ab0647ab0a7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 18 Oct 2005 12:20:06 -0700 Subject: [PATCH 0244/1519] [IPoIB] Improve ipoib_timeout() output Use jiffies_to_msecs() so we print a human-readable time so we don't have to worry about what HZ is configured to, and print out a few values to make post-mortem analysis easier. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 6c5bf07489f4..ee303859b044 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -637,8 +637,11 @@ static void ipoib_timeout(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - ipoib_warn(priv, "transmit timeout: latency %ld\n", - jiffies - dev->trans_start); + ipoib_warn(priv, "transmit timeout: latency %d msecs\n", + jiffies_to_msecs(jiffies - dev->trans_start)); + ipoib_warn(priv, "queue stopped %d, tx_head %u, tx_tail %u\n", + netif_queue_stopped(dev), + priv->tx_head, priv->tx_tail); /* XXX reset QP, etc. */ } -- GitLab From c6f5cb7be0ab478e0618e3c2c6ada27f56d1e7fb Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 18 Oct 2005 13:22:16 -0700 Subject: [PATCH 0245/1519] [IB] mthca: Use enum in mthca_alloc_db() prototype Make the type parameter of mthca_alloc_db() be an enum mthca_db_type instead of an int. This doesn't have any practical effect but documents the functions a little better. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_memfree.c | 3 ++- drivers/infiniband/hw/mthca/mthca_memfree.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 7bd7a4bec7b4..d63b1a147100 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -487,7 +487,8 @@ void mthca_cleanup_user_db_tab(struct mthca_dev *dev, struct mthca_uar *uar, } } -int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, __be32 **db) +int mthca_alloc_db(struct mthca_dev *dev, enum mthca_db_type type, + u32 qn, __be32 **db) { int group; int start, end, dir; diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index bafa51544aa3..29c01a4b2656 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -173,7 +173,8 @@ void mthca_cleanup_user_db_tab(struct mthca_dev *dev, struct mthca_uar *uar, int mthca_init_db_tab(struct mthca_dev *dev); void mthca_cleanup_db_tab(struct mthca_dev *dev); -int mthca_alloc_db(struct mthca_dev *dev, int type, u32 qn, __be32 **db); +int mthca_alloc_db(struct mthca_dev *dev, enum mthca_db_type type, + u32 qn, __be32 **db); void mthca_free_db(struct mthca_dev *dev, int type, int db_index); #endif /* MTHCA_MEMFREE_H */ -- GitLab From ad4ebed00fbf570411edbf6eb6c391e16b71df25 Mon Sep 17 00:00:00 2001 From: "ravinandan.arakali@neterion.com" Date: Mon, 17 Oct 2005 18:26:20 -0700 Subject: [PATCH 0246/1519] [PATCH] S2io: Offline diagnostics fixes This patch fixes the following bugs with offline diagnostics code(run with "ethtool -t"). 1. After running offline diagnostics, adapter would report corrupted packets on receive. This was because of adapter not being brought out of "RLDRAM test mode". 2. Current EEPROM test works only for Xframe I. Since Xframe II uses different interface(SPI), support for this interface has been added. Also, since SPI supports write access to all areas of EEPROM, negative testing is done only for Xframe I. 3. Return values from subfunctions of offline diagnostics have been corrected. 4. In register test, expected value from rx_queue_cfg register is made to depend on adapter type. 5. After the test, need to restore values at EEPROM offsets 0x4F0 and 0x7F0. These locations were modified as part of test. 6. Use macro SPECIAL_REG_WRITE for write access to mc_rldram_test_ctrl register. Also, couple of unnecessary writes to mc_rldram_test_ctrl have been removed. Signed-off-by: Ravinandan Arakali Signed-off-by: Jeff Garzik --- drivers/net/s2io-regs.h | 11 ++ drivers/net/s2io.c | 231 ++++++++++++++++++++++++++-------------- 2 files changed, 162 insertions(+), 80 deletions(-) diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 7cefe5507b9e..00179bc3437f 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -814,6 +814,17 @@ typedef struct _XENA_dev_config { u64 rxgxs_ber_0; /* CHANGED */ u64 rxgxs_ber_1; /* CHANGED */ + u64 spi_control; +#define SPI_CONTROL_KEY(key) vBIT(key,0,4) +#define SPI_CONTROL_BYTECNT(cnt) vBIT(cnt,29,3) +#define SPI_CONTROL_CMD(cmd) vBIT(cmd,32,8) +#define SPI_CONTROL_ADDR(addr) vBIT(addr,40,24) +#define SPI_CONTROL_SEL1 BIT(4) +#define SPI_CONTROL_REQ BIT(7) +#define SPI_CONTROL_NACK BIT(5) +#define SPI_CONTROL_DONE BIT(6) + u64 spi_data; +#define SPI_DATA_WRITE(data,len) vBIT(data,0,len) } XENA_dev_config_t; #define XENA_REG_SPACE sizeof(XENA_dev_config_t) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index fcf61107046e..30fbaf04773f 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -4378,29 +4378,53 @@ static int s2io_ethtool_setpause_data(struct net_device *dev, */ #define S2IO_DEV_ID 5 -static int read_eeprom(nic_t * sp, int off, u32 * data) +static int read_eeprom(nic_t * sp, int off, u64 * data) { int ret = -1; u32 exit_cnt = 0; u64 val64; XENA_dev_config_t __iomem *bar0 = sp->bar0; - val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) | - I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ | - I2C_CONTROL_CNTL_START; - SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); + if (sp->device_type == XFRAME_I_DEVICE) { + val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) | + I2C_CONTROL_BYTE_CNT(0x3) | I2C_CONTROL_READ | + I2C_CONTROL_CNTL_START; + SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); - while (exit_cnt < 5) { - val64 = readq(&bar0->i2c_control); - if (I2C_CONTROL_CNTL_END(val64)) { - *data = I2C_CONTROL_GET_DATA(val64); - ret = 0; - break; + while (exit_cnt < 5) { + val64 = readq(&bar0->i2c_control); + if (I2C_CONTROL_CNTL_END(val64)) { + *data = I2C_CONTROL_GET_DATA(val64); + ret = 0; + break; + } + msleep(50); + exit_cnt++; } - msleep(50); - exit_cnt++; } + if (sp->device_type == XFRAME_II_DEVICE) { + val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 | + SPI_CONTROL_BYTECNT(0x3) | + SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off); + SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); + val64 |= SPI_CONTROL_REQ; + SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); + while (exit_cnt < 5) { + val64 = readq(&bar0->spi_control); + if (val64 & SPI_CONTROL_NACK) { + ret = 1; + break; + } else if (val64 & SPI_CONTROL_DONE) { + *data = readq(&bar0->spi_data); + *data &= 0xffffff; + ret = 0; + break; + } + msleep(50); + exit_cnt++; + } + } return ret; } @@ -4419,28 +4443,53 @@ static int read_eeprom(nic_t * sp, int off, u32 * data) * 0 on success, -1 on failure. */ -static int write_eeprom(nic_t * sp, int off, u32 data, int cnt) +static int write_eeprom(nic_t * sp, int off, u64 data, int cnt) { int exit_cnt = 0, ret = -1; u64 val64; XENA_dev_config_t __iomem *bar0 = sp->bar0; - val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) | - I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA(data) | - I2C_CONTROL_CNTL_START; - SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); + if (sp->device_type == XFRAME_I_DEVICE) { + val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) | + I2C_CONTROL_BYTE_CNT(cnt) | I2C_CONTROL_SET_DATA((u32)data) | + I2C_CONTROL_CNTL_START; + SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); + + while (exit_cnt < 5) { + val64 = readq(&bar0->i2c_control); + if (I2C_CONTROL_CNTL_END(val64)) { + if (!(val64 & I2C_CONTROL_NACK)) + ret = 0; + break; + } + msleep(50); + exit_cnt++; + } + } - while (exit_cnt < 5) { - val64 = readq(&bar0->i2c_control); - if (I2C_CONTROL_CNTL_END(val64)) { - if (!(val64 & I2C_CONTROL_NACK)) + if (sp->device_type == XFRAME_II_DEVICE) { + int write_cnt = (cnt == 8) ? 0 : cnt; + writeq(SPI_DATA_WRITE(data,(cnt<<3)), &bar0->spi_data); + + val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 | + SPI_CONTROL_BYTECNT(write_cnt) | + SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off); + SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); + val64 |= SPI_CONTROL_REQ; + SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); + while (exit_cnt < 5) { + val64 = readq(&bar0->spi_control); + if (val64 & SPI_CONTROL_NACK) { + ret = 1; + break; + } else if (val64 & SPI_CONTROL_DONE) { ret = 0; - break; + break; + } + msleep(50); + exit_cnt++; } - msleep(50); - exit_cnt++; } - return ret; } @@ -4460,7 +4509,8 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt) static int s2io_ethtool_geeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 * data_buf) { - u32 data, i, valid; + u32 i, valid; + u64 data; nic_t *sp = dev->priv; eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16); @@ -4498,7 +4548,7 @@ static int s2io_ethtool_seeprom(struct net_device *dev, u8 * data_buf) { int len = eeprom->len, cnt = 0; - u32 valid = 0, data; + u64 valid = 0, data; nic_t *sp = dev->priv; if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) { @@ -4546,7 +4596,7 @@ static int s2io_ethtool_seeprom(struct net_device *dev, static int s2io_register_test(nic_t * sp, uint64_t * data) { XENA_dev_config_t __iomem *bar0 = sp->bar0; - u64 val64 = 0; + u64 val64 = 0, exp_val; int fail = 0; val64 = readq(&bar0->pif_rd_swapper_fb); @@ -4562,7 +4612,11 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) } val64 = readq(&bar0->rx_queue_cfg); - if (val64 != 0x0808080808080808ULL) { + if (sp->device_type == XFRAME_II_DEVICE) + exp_val = 0x0404040404040404ULL; + else + exp_val = 0x0808080808080808ULL; + if (val64 != exp_val) { fail = 1; DBG_PRINT(INFO_DBG, "Read Test level 3 fails\n"); } @@ -4590,7 +4644,7 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) } *data = fail; - return 0; + return fail; } /** @@ -4609,58 +4663,83 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) static int s2io_eeprom_test(nic_t * sp, uint64_t * data) { int fail = 0; - u32 ret_data; + u64 ret_data, org_4F0, org_7F0; + u8 saved_4F0 = 0, saved_7F0 = 0; + struct net_device *dev = sp->dev; /* Test Write Error at offset 0 */ - if (!write_eeprom(sp, 0, 0, 3)) - fail = 1; + /* Note that SPI interface allows write access to all areas + * of EEPROM. Hence doing all negative testing only for Xframe I. + */ + if (sp->device_type == XFRAME_I_DEVICE) + if (!write_eeprom(sp, 0, 0, 3)) + fail = 1; + + /* Save current values at offsets 0x4F0 and 0x7F0 */ + if (!read_eeprom(sp, 0x4F0, &org_4F0)) + saved_4F0 = 1; + if (!read_eeprom(sp, 0x7F0, &org_7F0)) + saved_7F0 = 1; /* Test Write at offset 4f0 */ - if (write_eeprom(sp, 0x4F0, 0x01234567, 3)) + if (write_eeprom(sp, 0x4F0, 0x012345, 3)) fail = 1; if (read_eeprom(sp, 0x4F0, &ret_data)) fail = 1; - if (ret_data != 0x01234567) + if (ret_data != 0x012345) { + DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data); fail = 1; + } /* Reset the EEPROM data go FFFF */ - write_eeprom(sp, 0x4F0, 0xFFFFFFFF, 3); + write_eeprom(sp, 0x4F0, 0xFFFFFF, 3); /* Test Write Request Error at offset 0x7c */ - if (!write_eeprom(sp, 0x07C, 0, 3)) - fail = 1; + if (sp->device_type == XFRAME_I_DEVICE) + if (!write_eeprom(sp, 0x07C, 0, 3)) + fail = 1; - /* Test Write Request at offset 0x7fc */ - if (write_eeprom(sp, 0x7FC, 0x01234567, 3)) + /* Test Write Request at offset 0x7f0 */ + if (write_eeprom(sp, 0x7F0, 0x012345, 3)) fail = 1; - if (read_eeprom(sp, 0x7FC, &ret_data)) + if (read_eeprom(sp, 0x7F0, &ret_data)) fail = 1; - if (ret_data != 0x01234567) + if (ret_data != 0x012345) { + DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data); fail = 1; + } /* Reset the EEPROM data go FFFF */ - write_eeprom(sp, 0x7FC, 0xFFFFFFFF, 3); + write_eeprom(sp, 0x7F0, 0xFFFFFF, 3); - /* Test Write Error at offset 0x80 */ - if (!write_eeprom(sp, 0x080, 0, 3)) - fail = 1; + if (sp->device_type == XFRAME_I_DEVICE) { + /* Test Write Error at offset 0x80 */ + if (!write_eeprom(sp, 0x080, 0, 3)) + fail = 1; - /* Test Write Error at offset 0xfc */ - if (!write_eeprom(sp, 0x0FC, 0, 3)) - fail = 1; + /* Test Write Error at offset 0xfc */ + if (!write_eeprom(sp, 0x0FC, 0, 3)) + fail = 1; - /* Test Write Error at offset 0x100 */ - if (!write_eeprom(sp, 0x100, 0, 3)) - fail = 1; + /* Test Write Error at offset 0x100 */ + if (!write_eeprom(sp, 0x100, 0, 3)) + fail = 1; - /* Test Write Error at offset 4ec */ - if (!write_eeprom(sp, 0x4EC, 0, 3)) - fail = 1; + /* Test Write Error at offset 4ec */ + if (!write_eeprom(sp, 0x4EC, 0, 3)) + fail = 1; + } + + /* Restore values at offsets 0x4F0 and 0x7F0 */ + if (saved_4F0) + write_eeprom(sp, 0x4F0, org_4F0, 3); + if (saved_7F0) + write_eeprom(sp, 0x7F0, org_7F0, 3); *data = fail; - return 0; + return fail; } /** @@ -4742,7 +4821,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) { XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; - int cnt, iteration = 0, test_pass = 0; + int cnt, iteration = 0, test_fail = 0; val64 = readq(&bar0->adapter_control); val64 &= ~ADAPTER_ECC_EN; @@ -4750,7 +4829,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) val64 = readq(&bar0->mc_rldram_test_ctrl); val64 |= MC_RLDRAM_TEST_MODE; - writeq(val64, &bar0->mc_rldram_test_ctrl); + SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); val64 = readq(&bar0->mc_rldram_mrs); val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE; @@ -4778,17 +4857,12 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) } writeq(val64, &bar0->mc_rldram_test_d2); - val64 = (u64) (0x0000003fffff0000ULL); + val64 = (u64) (0x0000003ffffe0100ULL); writeq(val64, &bar0->mc_rldram_test_add); - - val64 = MC_RLDRAM_TEST_MODE; - writeq(val64, &bar0->mc_rldram_test_ctrl); - - val64 |= - MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE | - MC_RLDRAM_TEST_GO; - writeq(val64, &bar0->mc_rldram_test_ctrl); + val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_WRITE | + MC_RLDRAM_TEST_GO; + SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); for (cnt = 0; cnt < 5; cnt++) { val64 = readq(&bar0->mc_rldram_test_ctrl); @@ -4800,11 +4874,8 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) if (cnt == 5) break; - val64 = MC_RLDRAM_TEST_MODE; - writeq(val64, &bar0->mc_rldram_test_ctrl); - - val64 |= MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO; - writeq(val64, &bar0->mc_rldram_test_ctrl); + val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO; + SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); for (cnt = 0; cnt < 5; cnt++) { val64 = readq(&bar0->mc_rldram_test_ctrl); @@ -4817,18 +4888,18 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) break; val64 = readq(&bar0->mc_rldram_test_ctrl); - if (val64 & MC_RLDRAM_TEST_PASS) - test_pass = 1; + if (!(val64 & MC_RLDRAM_TEST_PASS)) + test_fail = 1; iteration++; } - if (!test_pass) - *data = 1; - else - *data = 0; + *data = test_fail; - return 0; + /* Bring the adapter out of test mode */ + SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF); + + return test_fail; } /** -- GitLab From bc0a7438605c5e0cafdb32a3caf46254e146b116 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 17 Oct 2005 12:42:32 +0100 Subject: [PATCH 0247/1519] [PATCH] rcu in bpqether driver. From Suzanne Wood : Clarify RCU implementation in bpqether.c. Because bpq_new_device() calls list_add_rcu() and bpq_free_device() calls list_del_rcu(), substitute list_for_each_entry_rcu() for list_for_each_entry() in bpq_get_ax25_dev() and in bpq_seq_start(). Add rcu dereference protection in bpq_seq_next(). The rcu_read_lock()/unlock() in bpq_device_event() are removed because netdev event handlers are called with RTNL locking in place. FYI: bpq_free_device() calls list_del_rcu() which, per list.h, requires synchronize_rcu() which can block or call_rcu() or call_rcu_bh() which cannot block. Herbert Xu notes that synchronization is done here by unregister_netdevice(). This calls synchronize_net() which in turn uses synchronize_rcu(). Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/bpqether.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index 1756f0ed54cc..cb43a9d28774 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -144,7 +144,7 @@ static inline struct net_device *bpq_get_ax25_dev(struct net_device *dev) { struct bpqdev *bpq; - list_for_each_entry(bpq, &bpq_devices, bpq_list) { + list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list) { if (bpq->ethdev == dev) return bpq->axdev; } @@ -399,7 +399,7 @@ static void *bpq_seq_start(struct seq_file *seq, loff_t *pos) if (*pos == 0) return SEQ_START_TOKEN; - list_for_each_entry(bpqdev, &bpq_devices, bpq_list) { + list_for_each_entry_rcu(bpqdev, &bpq_devices, bpq_list) { if (i == *pos) return bpqdev; } @@ -418,7 +418,7 @@ static void *bpq_seq_next(struct seq_file *seq, void *v, loff_t *pos) p = ((struct bpqdev *)v)->bpq_list.next; return (p == &bpq_devices) ? NULL - : list_entry(p, struct bpqdev, bpq_list); + : rcu_dereference(list_entry(p, struct bpqdev, bpq_list)); } static void bpq_seq_stop(struct seq_file *seq, void *v) @@ -561,8 +561,6 @@ static int bpq_device_event(struct notifier_block *this,unsigned long event, voi if (!dev_is_ethdev(dev)) return NOTIFY_DONE; - rcu_read_lock(); - switch (event) { case NETDEV_UP: /* new ethernet device -> new BPQ interface */ if (bpq_get_ax25_dev(dev) == NULL) @@ -581,7 +579,6 @@ static int bpq_device_event(struct notifier_block *this,unsigned long event, voi default: break; } - rcu_read_unlock(); return NOTIFY_DONE; } -- GitLab From 5793f4be23f0171b4999ca68a39a9157b44139f3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 14 Oct 2005 14:28:09 +0100 Subject: [PATCH 0248/1519] [PATCH] SMACK support for mkiss SMACK (Stuttgart Modified Amateurradio CRC KISS) is a KISS variant that uses CRC16 checksums to secure data transfers between the modem and host. It's also used to communicate over a pty to applications such as Wampes. Patches for Linux 2.4 by Thomas Osterried DL9SAU, upgraded to the latest mkiss 2.6 mkiss driver by me. Signed-off-by: Thomas Osterried DL9SAU Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/Kconfig | 1 + drivers/net/hamradio/mkiss.c | 178 +++++++++++++++++++++++++++++------ 2 files changed, 148 insertions(+), 31 deletions(-) diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index de087cd609d9..896aa02000d7 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -1,6 +1,7 @@ config MKISS tristate "Serial port KISS driver" depends on AX25 + select CRC16 ---help--- KISS is a protocol used for the exchange of data between a computer and a Terminal Node Controller (a small embedded system commonly diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 331a75c8aee2..7961f5b41c4b 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -14,13 +14,14 @@ * * Copyright (C) Hans Alblas PE1AYX * Copyright (C) 2004, 05 Ralf Baechle DL5RB + * Copyright (C) 2004, 05 Thomas Osterried DL9SAU */ - #include #include #include #include #include +#include #include #include #include @@ -39,11 +40,6 @@ #include -#ifdef CONFIG_INET -#include -#include -#endif - #define AX_MTU 236 /* SLIP/KISS protocol characters. */ @@ -80,9 +76,13 @@ struct mkiss { int mode; int crcmode; /* MW: for FlexNet, SMACK etc. */ -#define CRC_MODE_NONE 0 -#define CRC_MODE_FLEX 1 -#define CRC_MODE_SMACK 2 + int crcauto; /* CRC auto mode */ + +#define CRC_MODE_NONE 0 +#define CRC_MODE_FLEX 1 +#define CRC_MODE_SMACK 2 +#define CRC_MODE_FLEX_TEST 3 +#define CRC_MODE_SMACK_TEST 4 atomic_t refcnt; struct semaphore dead_sem; @@ -151,6 +151,21 @@ static int check_crc_flex(unsigned char *cp, int size) return 0; } +static int check_crc_16(unsigned char *cp, int size) +{ + unsigned short crc = 0x0000; + + if (size < 3) + return -1; + + crc = crc16(0, cp, size); + + if (crc != 0x0000) + return -1; + + return 0; +} + /* * Standard encapsulation */ @@ -237,19 +252,42 @@ static void ax_bump(struct mkiss *ax) spin_lock_bh(&ax->buflock); if (ax->rbuff[0] > 0x0f) { - if (ax->rbuff[0] & 0x20) { - ax->crcmode = CRC_MODE_FLEX; + if (ax->rbuff[0] & 0x80) { + if (check_crc_16(ax->rbuff, ax->rcount) < 0) { + ax->stats.rx_errors++; + spin_unlock_bh(&ax->buflock); + + return; + } + if (ax->crcmode != CRC_MODE_SMACK && ax->crcauto) { + printk(KERN_INFO + "mkiss: %s: Switchting to crc-smack\n", + ax->dev->name); + ax->crcmode = CRC_MODE_SMACK; + } + ax->rcount -= 2; + *ax->rbuff &= ~0x80; + } else if (ax->rbuff[0] & 0x20) { if (check_crc_flex(ax->rbuff, ax->rcount) < 0) { - ax->stats.rx_errors++; + ax->stats.rx_errors++; + spin_unlock_bh(&ax->buflock); return; } + if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) { + printk(KERN_INFO + "mkiss: %s: Switchting to crc-flexnet\n", + ax->dev->name); + ax->crcmode = CRC_MODE_FLEX; + } ax->rcount -= 2; - /* dl9sau bugfix: the trailling two bytes flexnet crc - * will not be passed to the kernel. thus we have - * to correct the kissparm signature, because it - * indicates a crc but there's none + + /* + * dl9sau bugfix: the trailling two bytes flexnet crc + * will not be passed to the kernel. thus we have to + * correct the kissparm signature, because it indicates + * a crc but there's none */ - *ax->rbuff &= ~0x20; + *ax->rbuff &= ~0x20; } } spin_unlock_bh(&ax->buflock); @@ -417,20 +455,69 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) p = icp; spin_lock_bh(&ax->buflock); - switch (ax->crcmode) { - unsigned short crc; + if ((*p & 0x0f) != 0) { + /* Configuration Command (kissparms(1). + * Protocol spec says: never append CRC. + * This fixes a very old bug in the linux + * kiss driver. -- dl9sau */ + switch (*p & 0xff) { + case 0x85: + /* command from userspace especially for us, + * not for delivery to the tnc */ + if (len > 1) { + int cmd = (p[1] & 0xff); + switch(cmd) { + case 3: + ax->crcmode = CRC_MODE_SMACK; + break; + case 2: + ax->crcmode = CRC_MODE_FLEX; + break; + case 1: + ax->crcmode = CRC_MODE_NONE; + break; + case 0: + default: + ax->crcmode = CRC_MODE_SMACK_TEST; + cmd = 0; + } + ax->crcauto = (cmd ? 0 : 1); + printk(KERN_INFO "mkiss: %s: crc mode %s %d\n", ax->dev->name, (len) ? "set to" : "is", cmd); + } + spin_unlock_bh(&ax->buflock); + netif_start_queue(dev); - case CRC_MODE_FLEX: - *p |= 0x20; - crc = calc_crc_flex(p, len); - count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2); - break; + return; + default: + count = kiss_esc(p, (unsigned char *)ax->xbuff, len); + } + } else { + unsigned short crc; + switch (ax->crcmode) { + case CRC_MODE_SMACK_TEST: + ax->crcmode = CRC_MODE_FLEX_TEST; + printk(KERN_INFO "mkiss: %s: Trying crc-smack\n", ax->dev->name); + // fall through + case CRC_MODE_SMACK: + *p |= 0x80; + crc = swab16(crc16(0, p, len)); + count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2); + break; + case CRC_MODE_FLEX_TEST: + ax->crcmode = CRC_MODE_NONE; + printk(KERN_INFO "mkiss: %s: Trying crc-flexnet\n", ax->dev->name); + // fall through + case CRC_MODE_FLEX: + *p |= 0x20; + crc = calc_crc_flex(p, len); + count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2); + break; + + default: + count = kiss_esc(p, (unsigned char *)ax->xbuff, len); + } + } - default: - count = kiss_esc(p, (unsigned char *)ax->xbuff, len); - break; - } - set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); actual = ax->tty->driver->write(ax->tty, ax->xbuff, count); ax->stats.tx_packets++; @@ -439,8 +526,6 @@ static void ax_encaps(struct net_device *dev, unsigned char *icp, int len) ax->dev->trans_start = jiffies; ax->xleft = count - actual; ax->xhead = ax->xbuff + actual; - - spin_unlock_bh(&ax->buflock); } /* Encapsulate an AX.25 packet and kick it into a TTY queue. */ @@ -643,6 +728,8 @@ static void mkiss_put(struct mkiss *ax) up(&ax->dead_sem); } +static int crc_force = 0; /* Can be overridden with insmod */ + static int mkiss_open(struct tty_struct *tty) { struct net_device *dev; @@ -682,6 +769,33 @@ static int mkiss_open(struct tty_struct *tty) if (register_netdev(dev)) goto out_free_buffers; + /* after register_netdev() - because else printk smashes the kernel */ + switch (crc_force) { + case 3: + ax->crcmode = CRC_MODE_SMACK; + printk(KERN_INFO "mkiss: %s: crc mode smack forced.\n", + ax->dev->name); + break; + case 2: + ax->crcmode = CRC_MODE_FLEX; + printk(KERN_INFO "mkiss: %s: crc mode flexnet forced.\n", + ax->dev->name); + break; + case 1: + ax->crcmode = CRC_MODE_NONE; + printk(KERN_INFO "mkiss: %s: crc mode disabled.\n", + ax->dev->name); + break; + case 0: + /* fall through */ + default: + crc_force = 0; + printk(KERN_INFO "mkiss: %s: crc mode is auto.\n", + ax->dev->name); + ax->crcmode = CRC_MODE_SMACK_TEST; + } + ax->crcauto = (crc_force ? 0 : 1); + netif_start_queue(dev); /* Done. We have linked the TTY line to a channel. */ @@ -903,6 +1017,8 @@ static void __exit mkiss_exit_driver(void) MODULE_AUTHOR("Ralf Baechle DL5RB "); MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs"); +MODULE_PARM(crc_force, "i"); +MODULE_PARM_DESC(crc_force, "crc [0 = auto | 1 = none | 2 = flexnet | 3 = smack]"); MODULE_LICENSE("GPL"); MODULE_ALIAS_LDISC(N_AX25); -- GitLab From 74cfe03f80adc320bde4dd37616354aefe2271aa Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 12 Oct 2005 23:11:01 +0100 Subject: [PATCH 0249/1519] [PATCH] Initialize the .owner field the tty_ldisc structure. If .owner isn't set the module can be unloaded even while still active. Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 7961f5b41c4b..85d6dc005be0 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -977,6 +977,7 @@ static void mkiss_write_wakeup(struct tty_struct *tty) } static struct tty_ldisc ax_ldisc = { + .owner = THIS_MODULE, .magic = TTY_LDISC_MAGIC, .name = "mkiss", .open = mkiss_open, -- GitLab From d476306f1cc9156ce4b42586aacce70a356ef656 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 18 Oct 2005 14:07:07 -0700 Subject: [PATCH 0250/1519] [IB] mthca: Add struct pci_driver.owner field Set mthca_driver.owner to THIS_MODULE. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 7c35abec81ea..883d1e5a79bc 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -1196,6 +1196,7 @@ MODULE_DEVICE_TABLE(pci, mthca_pci_table); static struct pci_driver mthca_driver = { .name = DRV_NAME, + .owner = THIS_MODULE, .id_table = mthca_pci_table, .probe = mthca_init_one, .remove = __devexit_p(mthca_remove_one) -- GitLab From ba8e9310244180bbc820e865d2e4378809b4a443 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 18 Oct 2005 14:14:56 -0700 Subject: [PATCH 0251/1519] [IB] Fail sysfs queries after device is unregistered We keep IB device structures around until the last sysfs reference is gone, but we shouldn't ask the low-level driver to do anything after the LLD unregisters the device. To handle this, check the reg_state field and just fail sysfs show() requests if the device has already been unregistered. Signed-off-by: Roland Dreier --- drivers/infiniband/core/sysfs.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 211ba3223f65..7ce7a6c782fa 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -65,6 +65,11 @@ struct port_table_attribute { int index; }; +static inline int ibdev_is_alive(const struct ib_device *dev) +{ + return dev->reg_state == IB_DEV_REGISTERED; +} + static ssize_t port_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) { @@ -74,6 +79,8 @@ static ssize_t port_attr_show(struct kobject *kobj, if (!port_attr->show) return -EIO; + if (!ibdev_is_alive(p->ibdev)) + return -ENODEV; return port_attr->show(p, port_attr, buf); } @@ -581,6 +588,9 @@ static ssize_t show_node_type(struct class_device *cdev, char *buf) { struct ib_device *dev = container_of(cdev, struct ib_device, class_dev); + if (!ibdev_is_alive(dev)) + return -ENODEV; + switch (dev->node_type) { case IB_NODE_CA: return sprintf(buf, "%d: CA\n", dev->node_type); case IB_NODE_SWITCH: return sprintf(buf, "%d: switch\n", dev->node_type); @@ -595,6 +605,9 @@ static ssize_t show_sys_image_guid(struct class_device *cdev, char *buf) struct ib_device_attr attr; ssize_t ret; + if (!ibdev_is_alive(dev)) + return -ENODEV; + ret = ib_query_device(dev, &attr); if (ret) return ret; @@ -612,6 +625,9 @@ static ssize_t show_node_guid(struct class_device *cdev, char *buf) struct ib_device_attr attr; ssize_t ret; + if (!ibdev_is_alive(dev)) + return -ENODEV; + ret = ib_query_device(dev, &attr); if (ret) return ret; -- GitLab From 07506697d1c615924298406f2357810709c09bcd Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:04:18 +0800 Subject: [PATCH 0252/1519] [PATCH] libata CHS: move the initialization of taskfile LBA flags (revise #6) move the initialization of taskfile LBA flags "ATA_TFLAG_LBA" and "ATA_TFLAG_LBA48 flags" to the SCSI translation functions Signed-off-by: Albert Lee ============= Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 7 ------- drivers/scsi/libata-scsi.c | 42 +++++++++++++++++++++++--------------- 2 files changed, 25 insertions(+), 24 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d568914c4344..55d4dee133af 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3195,13 +3195,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, qc->nbytes = qc->curbytes = 0; ata_tf_init(ap, &qc->tf, dev->devno); - - if (dev->flags & ATA_DFLAG_LBA) { - qc->tf.flags |= ATA_TFLAG_LBA; - - if (dev->flags & ATA_DFLAG_LBA48) - qc->tf.flags |= ATA_TFLAG_LBA48; - } } return qc; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index c64169ca7ff0..ea7a4d8a6fc9 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -492,7 +492,7 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->flags |= ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if ((tf->flags & ATA_TFLAG_LBA48) && + if ((qc->dev->flags & ATA_DFLAG_LBA48) && (ata_id_has_flush_ext(qc->dev->id))) tf->command = ATA_CMD_FLUSH_EXT; else @@ -612,8 +612,6 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; - unsigned int lba = tf->flags & ATA_TFLAG_LBA; - unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; u64 block; u32 n_block; @@ -634,16 +632,16 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) goto out_of_range; if ((block + n_block) > dev_sectors) goto out_of_range; - if (lba48) { - if (n_block > (64 * 1024)) - goto invalid_fld; - } else { - if (n_block > 256) - goto invalid_fld; - } - if (lba) { - if (lba48) { + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) { + if (n_block > (64 * 1024)) + goto invalid_fld; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; tf->command = ATA_CMD_VERIFY_EXT; tf->hob_nsect = (n_block >> 8) & 0xff; @@ -652,6 +650,10 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; } else { + if (n_block > 256) + goto invalid_fld; + + /* use LBA28 */ tf->command = ATA_CMD_VERIFY; tf->device |= (block >> 24) & 0xf; @@ -668,6 +670,9 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* CHS */ u32 sect, head, cyl, track; + if (n_block > 256) + goto invalid_fld; + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; @@ -733,8 +738,6 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; - unsigned int lba = tf->flags & ATA_TFLAG_LBA; - unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 block; u32 n_block; @@ -783,19 +786,24 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) */ goto nothing_to_do; - if (lba) { - if (lba48) { + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) { /* The request -may- be too large for LBA48. */ if ((block >> 48) || (n_block > 65536)) goto out_of_range; + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + tf->hob_nsect = (n_block >> 8) & 0xff; tf->hob_lbah = (block >> 40) & 0xff; tf->hob_lbam = (block >> 32) & 0xff; tf->hob_lbal = (block >> 24) & 0xff; } else { - /* LBA28 */ + /* use LBA28 */ /* The request -may- be too large for LBA28. */ if ((block >> 28) || (n_block > 256)) -- GitLab From 8cbd6df1f0ce977ab7b61feffa59879bb5e0ed8f Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:06:27 +0800 Subject: [PATCH 0253/1519] [PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee ============== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 105 +++++++++++++------------------------ drivers/scsi/libata-scsi.c | 13 +++-- drivers/scsi/libata.h | 1 + include/linux/ata.h | 4 ++ include/linux/libata.h | 6 +-- 5 files changed, 50 insertions(+), 79 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 55d4dee133af..19d3d717faf6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -616,79 +616,53 @@ void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) tf->hob_nsect = fis[13]; } -/** - * ata_prot_to_cmd - determine which read/write opcodes to use - * @protocol: ATA_PROT_xxx taskfile protocol - * @lba48: true is lba48 is present - * - * Given necessary input, determine which read/write commands - * to use to transfer data. - * - * LOCKING: - * None. - */ -static int ata_prot_to_cmd(int protocol, int lba48) -{ - int rcmd = 0, wcmd = 0; - - switch (protocol) { - case ATA_PROT_PIO: - if (lba48) { - rcmd = ATA_CMD_PIO_READ_EXT; - wcmd = ATA_CMD_PIO_WRITE_EXT; - } else { - rcmd = ATA_CMD_PIO_READ; - wcmd = ATA_CMD_PIO_WRITE; - } - break; - - case ATA_PROT_DMA: - if (lba48) { - rcmd = ATA_CMD_READ_EXT; - wcmd = ATA_CMD_WRITE_EXT; - } else { - rcmd = ATA_CMD_READ; - wcmd = ATA_CMD_WRITE; - } - break; - - default: - return -1; - } - - return rcmd | (wcmd << 8); -} +static const u8 ata_rw_cmds[] = { + /* pio multi */ + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + /* pio */ + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + /* dma */ + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT +}; /** - * ata_dev_set_protocol - set taskfile protocol and r/w commands - * @dev: device to examine and configure + * ata_rwcmd_protocol - set taskfile r/w commands and protocol + * @qc: command to examine and configure * - * Examine the device configuration, after we have - * read the identify-device page and configured the - * data transfer mode. Set internal state related to - * the ATA taskfile protocol (pio, pio mult, dma, etc.) - * and calculate the proper read/write commands to use. + * Examine the device configuration and tf->flags to calculate + * the proper read/write commands and protocol to use. * * LOCKING: * caller. */ -static void ata_dev_set_protocol(struct ata_device *dev) +void ata_rwcmd_protocol(struct ata_queued_cmd *qc) { - int pio = (dev->flags & ATA_DFLAG_PIO); - int lba48 = (dev->flags & ATA_DFLAG_LBA48); - int proto, cmd; + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; - if (pio) - proto = dev->xfer_protocol = ATA_PROT_PIO; - else - proto = dev->xfer_protocol = ATA_PROT_DMA; + int index, lba48, write; + + lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; + write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; - cmd = ata_prot_to_cmd(proto, lba48); - if (cmd < 0) - BUG(); + if (dev->flags & ATA_DFLAG_PIO) { + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 4; + } else { + tf->protocol = ATA_PROT_DMA; + index = 8; + } - dev->read_cmd = cmd & 0xff; - dev->write_cmd = (cmd >> 8) & 0xff; + tf->command = ata_rw_cmds[index + lba48 + write]; } static const char * xfer_mode_str[] = { @@ -1641,7 +1615,7 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, */ static void ata_set_mode(struct ata_port *ap) { - unsigned int i, xfer_shift; + unsigned int xfer_shift; u8 xfer_mode; int rc; @@ -1670,11 +1644,6 @@ static void ata_set_mode(struct ata_port *ap) if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); - for (i = 0; i < 2; i++) { - struct ata_device *dev = &ap->device[i]; - ata_dev_set_protocol(dev); - } - return; err_out: diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ea7a4d8a6fc9..90bf22204668 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -742,15 +742,10 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf->protocol = qc->dev->xfer_protocol; - if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || - scsicmd[0] == READ_16) { - tf->command = qc->dev->read_cmd; - } else { - tf->command = qc->dev->write_cmd; + if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || + scsicmd[0] == WRITE_16) tf->flags |= ATA_TFLAG_WRITE; - } /* Calculate the SCSI LBA and transfer length. */ switch (scsicmd[0]) { @@ -812,6 +807,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->device |= (block >> 24) & 0xf; } + ata_rwcmd_protocol(qc); + qc->nsect = n_block; tf->nsect = n_block & 0xff; @@ -828,6 +825,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) if ((block >> 28) || (n_block > 256)) goto out_of_range; + ata_rwcmd_protocol(qc); + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index a18f2ac1d4a1..67d752ca8ae2 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -42,6 +42,7 @@ extern int atapi_enabled; extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); +extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); diff --git a/include/linux/ata.h b/include/linux/ata.h index ecb7346d0c16..630908c9378b 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -128,6 +128,10 @@ enum { ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, ATA_CMD_PIO_WRITE_EXT = 0x34, + ATA_CMD_READ_MULTI = 0xC4, + ATA_CMD_READ_MULTI_EXT = 0x29, + ATA_CMD_WRITE_MULTI = 0xC5, + ATA_CMD_WRITE_MULTI_EXT = 0x39, ATA_CMD_SET_FEATURES = 0xEF, ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, diff --git a/include/linux/libata.h b/include/linux/libata.h index 7929cfc9318d..0261c55f3483 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -283,10 +283,8 @@ struct ata_device { u8 xfer_mode; unsigned int xfer_shift; /* ATA_SHIFT_xxx */ - /* cache info about current transfer mode */ - u8 xfer_protocol; /* taskfile xfer protocol */ - u8 read_cmd; /* opcode to use on read */ - u8 write_cmd; /* opcode to use on write */ + unsigned int multi_count; /* sectors count for + READ/WRITE MULTIPLE */ /* for CHS addressing */ u16 cylinders; /* Number of cylinders */ -- GitLab From 59a10b172fccaea793352c00fd9065f0a5b4ef70 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 12 Oct 2005 15:09:42 +0800 Subject: [PATCH 0254/1519] [PATCH] libata CHS: reread device identify info (revise #6) problem: id[53-58] might be changed after initializing device CHS settings. changes: - call ata_dev_reread_id() to reread the identify device info, after initializing device CHS settings. Signed-off-by: Albert Lee ============ Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 65 +++++++++++++++++++++++++++++++++++++- 1 file changed, 64 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 19d3d717faf6..175d4646333d 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -63,6 +63,7 @@ static unsigned int ata_busy_sleep (struct ata_port *ap, unsigned long tmout_pat, unsigned long tmout); +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); @@ -1240,9 +1241,15 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) * anything else.. * Some drives were very specific about that exact sequence. */ - if (major_version < 4 || (!ata_id_has_lba(dev->id))) + if (major_version < 4 || (!ata_id_has_lba(dev->id))) { ata_dev_init_params(ap, dev); + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + ata_dev_reread_id(ap, dev); + } + if (ata_id_has_lba(dev->id)) { dev->flags |= ATA_DFLAG_LBA; @@ -2150,6 +2157,62 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) DPRINTK("EXIT\n"); } +/** + * ata_dev_reread_id - Reread the device identify device info + * @ap: port where the device is + * @dev: device to reread the identify device info + * + * LOCKING: + */ + +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + ata_sg_init_one(qc, dev->id, sizeof(dev->id)); + qc->dma_dir = DMA_FROM_DEVICE; + + if (dev->class == ATA_DEV_ATA) { + qc->tf.command = ATA_CMD_ID_ATA; + DPRINTK("do ATA identify\n"); + } else { + qc->tf.command = ATA_CMD_ID_ATAPI; + DPRINTK("do ATAPI identify\n"); + } + + qc->tf.flags |= ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_PIO; + qc->nsect = 1; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + goto err_out; + + wait_for_completion(&wait); + + swap_buf_le16(dev->id, ATA_ID_WORDS); + + ata_dump_id(dev); + + DPRINTK("EXIT\n"); + + return; +err_out: + ata_port_disable(ap); +} + /** * ata_dev_init_params - Issue INIT DEV PARAMS command * @ap: Port associated with device @dev -- GitLab From ea635a517e350eb03ab5f01618417f31b82a9a4d Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Thu, 6 Oct 2005 23:12:58 -0400 Subject: [PATCH 0255/1519] SUNRPC: Retry rpcbind requests if the server's portmapper isn't up After a server crash/reboot, rebinding should always retry, otherwise requests on "hard" mounts will fail when they shouldn't. Test plan: Run a lock-intensive workload against a server while rebooting the server repeatedly. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 5a8f01d726e9..a5f7029b1daa 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -759,7 +759,8 @@ call_bind_status(struct rpc_task *task) case -EACCES: dprintk("RPC: %4d remote rpcbind: RPC program/version unavailable\n", task->tk_pid); - break; + rpc_delay(task, 3*HZ); + goto retry_bind; case -ETIMEDOUT: dprintk("RPC: %4d rpcbind request timed out\n", task->tk_pid); -- GitLab From 5e5ce5be6f0161d2a069a4f8a1154fe639c5c02f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:11 -0700 Subject: [PATCH 0256/1519] RPC: allow call_encode() to delay transmission of an RPC call. Currently, call_encode will cause the entire RPC call to abort if it returns an error. This is unnecessarily rigid, and gets in the way of attempts to allow the NFSv4 layer to order RPC calls that carry sequence ids. Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 1 + net/sunrpc/clnt.c | 23 ++++++++++++----------- net/sunrpc/xprt.c | 8 ++++++++ 3 files changed, 21 insertions(+), 11 deletions(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 99cad3ead81d..068e1fb0868b 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -211,6 +211,7 @@ int xprt_reserve_xprt(struct rpc_task *task); int xprt_reserve_xprt_cong(struct rpc_task *task); int xprt_prepare_transmit(struct rpc_task *task); void xprt_transmit(struct rpc_task *task); +void xprt_abort_transmit(struct rpc_task *task); int xprt_adjust_timeout(struct rpc_rqst *req); void xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task); void xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task); diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index a5f7029b1daa..534274056329 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -678,13 +678,11 @@ call_allocate(struct rpc_task *task) static void call_encode(struct rpc_task *task) { - struct rpc_clnt *clnt = task->tk_client; struct rpc_rqst *req = task->tk_rqstp; struct xdr_buf *sndbuf = &req->rq_snd_buf; struct xdr_buf *rcvbuf = &req->rq_rcv_buf; unsigned int bufsiz; kxdrproc_t encode; - int status; u32 *p; dprintk("RPC: %4d call_encode (status %d)\n", @@ -712,12 +710,9 @@ call_encode(struct rpc_task *task) rpc_exit(task, -EIO); return; } - if (encode && (status = rpcauth_wrap_req(task, encode, req, p, - task->tk_msg.rpc_argp)) < 0) { - printk(KERN_WARNING "%s: can't encode arguments: %d\n", - clnt->cl_protname, -status); - rpc_exit(task, status); - } + if (encode != NULL) + task->tk_status = rpcauth_wrap_req(task, encode, req, p, + task->tk_msg.rpc_argp); } /* @@ -865,10 +860,12 @@ call_transmit(struct rpc_task *task) if (task->tk_status != 0) return; /* Encode here so that rpcsec_gss can use correct sequence number. */ - if (!task->tk_rqstp->rq_bytes_sent) + if (task->tk_rqstp->rq_bytes_sent == 0) { call_encode(task); - if (task->tk_status < 0) - return; + /* Did the encode result in an error condition? */ + if (task->tk_status != 0) + goto out_nosend; + } xprt_transmit(task); if (task->tk_status < 0) return; @@ -876,6 +873,10 @@ call_transmit(struct rpc_task *task) task->tk_action = NULL; rpc_wake_up_task(task); } + return; +out_nosend: + /* release socket write lock before attempting to handle error */ + xprt_abort_transmit(task); } /* diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 215be0d0ef6b..1ba55dc38b7a 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -709,6 +709,14 @@ int xprt_prepare_transmit(struct rpc_task *task) return err; } +void +xprt_abort_transmit(struct rpc_task *task) +{ + struct rpc_xprt *xprt = task->tk_xprt; + + xprt_release_write(xprt, task); +} + /** * xprt_transmit - send an RPC request on a transport * @task: controlling RPC task -- GitLab From cee54fc944422c44e476736c045a9e8053cb0644 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:12 -0700 Subject: [PATCH 0257/1519] NFSv4: Add functions to order RPC calls NFSv4 file state-changing functions such as OPEN, CLOSE, LOCK,... are all labelled with "sequence identifiers" in order to prevent the server from reordering RPC requests, as this could cause its file state to become out of sync with the client. Currently the NFS client code enforces this ordering locally using semaphores to restrict access to structures until the RPC call is done. This, of course, only works with synchronous RPC calls, since the user process must first grab the semaphore. By dropping semaphores, and instead teaching the RPC engine to hold the RPC calls until they are ready to be sent, we can extend this process to work nicely with asynchronous RPC calls too. This patch adds a new list called "rpc_sequence" that defines the order of the RPC calls to be sent. We add one such list for each state_owner. When an RPC call is ready to be sent, it checks if it is top of the rpc_sequence list. If so, it proceeds. If not, it goes back to sleep, and loops until it hits top of the list. Once the RPC call has completed, it can then bump the sequence id counter, and remove itself from the rpc_sequence list, and then wake up the next sleeper. Note that the state_owner sequence ids and lock_owner sequence ids are all indexed to the same rpc_sequence list, so OPEN, LOCK,... requests are all ordered w.r.t. each other. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 42 ++++++++++-- fs/nfs/nfs4proc.c | 111 +++++++++++++++++++----------- fs/nfs/nfs4state.c | 145 +++++++++++++++++++++++++++++++++------- fs/nfs/nfs4xdr.c | 43 +++++++++--- include/linux/nfs_xdr.h | 15 +++-- 5 files changed, 273 insertions(+), 83 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index ec1a22d7b876..6ac6708484f5 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -92,6 +92,35 @@ struct nfs4_client { unsigned char cl_id_uniquifier; }; +/* + * struct rpc_sequence ensures that RPC calls are sent in the exact + * order that they appear on the list. + */ +struct rpc_sequence { + struct rpc_wait_queue wait; /* RPC call delay queue */ + spinlock_t lock; /* Protects the list */ + struct list_head list; /* Defines sequence of RPC calls */ +}; + +#define NFS_SEQID_CONFIRMED 1 +struct nfs_seqid_counter { + struct rpc_sequence *sequence; + int flags; + u32 counter; +}; + +struct nfs_seqid { + struct list_head list; + struct nfs_seqid_counter *sequence; + struct rpc_task *task; +}; + +static inline void nfs_confirm_seqid(struct nfs_seqid_counter *seqid, int status) +{ + if (seqid_mutating_err(-status)) + seqid->flags |= NFS_SEQID_CONFIRMED; +} + /* * NFS4 state_owners and lock_owners are simply labels for ordered * sequences of RPC calls. Their sole purpose is to provide once-only @@ -106,12 +135,13 @@ struct nfs4_state_owner { struct nfs4_client *so_client; u32 so_id; /* 32-bit identifier, unique */ struct semaphore so_sema; - u32 so_seqid; /* protected by so_sema */ atomic_t so_count; struct rpc_cred *so_cred; /* Associated cred */ struct list_head so_states; struct list_head so_delegations; + struct nfs_seqid_counter so_seqid; + struct rpc_sequence so_sequence; }; /* @@ -132,7 +162,7 @@ struct nfs4_lock_state { fl_owner_t ls_owner; /* POSIX lock owner */ #define NFS_LOCK_INITIALIZED 1 int ls_flags; - u32 ls_seqid; + struct nfs_seqid_counter ls_seqid; u32 ls_id; nfs4_stateid ls_stateid; atomic_t ls_count; @@ -224,12 +254,16 @@ extern struct nfs4_state * nfs4_get_open_state(struct inode *, struct nfs4_state extern void nfs4_put_open_state(struct nfs4_state *); extern void nfs4_close_state(struct nfs4_state *, mode_t); extern struct nfs4_state *nfs4_find_state(struct inode *, struct rpc_cred *, mode_t mode); -extern void nfs4_increment_seqid(int status, struct nfs4_state_owner *sp); extern void nfs4_schedule_state_recovery(struct nfs4_client *); extern int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl); -extern void nfs4_increment_lock_seqid(int status, struct nfs4_lock_state *ls); extern void nfs4_copy_stateid(nfs4_stateid *, struct nfs4_state *, fl_owner_t); +extern struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter); +extern int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task); +extern void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid); +extern void nfs_increment_lock_seqid(int status, struct nfs_seqid *seqid); +extern void nfs_free_seqid(struct nfs_seqid *seqid); + extern const nfs4_stateid zero_stateid; /* nfs4xdr.c */ diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 9701ca8c9428..9ba89e7cdd28 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -218,7 +218,6 @@ static int _nfs4_open_reclaim(struct nfs4_state_owner *sp, struct nfs4_state *st struct nfs_delegation *delegation = NFS_I(inode)->delegation; struct nfs_openargs o_arg = { .fh = NFS_FH(inode), - .seqid = sp->so_seqid, .id = sp->so_id, .open_flags = state->state, .clientid = server->nfs4_state->cl_clientid, @@ -245,8 +244,13 @@ static int _nfs4_open_reclaim(struct nfs4_state_owner *sp, struct nfs4_state *st } o_arg.u.delegation_type = delegation->type; } + o_arg.seqid = nfs_alloc_seqid(&sp->so_seqid); + if (o_arg.seqid == NULL) + return -ENOMEM; status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - nfs4_increment_seqid(status, sp); + /* Confirm the sequence as being established */ + nfs_confirm_seqid(&sp->so_seqid, status); + nfs_increment_open_seqid(status, o_arg.seqid); if (status == 0) { memcpy(&state->stateid, &o_res.stateid, sizeof(state->stateid)); if (o_res.delegation_type != 0) { @@ -256,6 +260,7 @@ static int _nfs4_open_reclaim(struct nfs4_state_owner *sp, struct nfs4_state *st nfs_async_inode_return_delegation(inode, &o_res.stateid); } } + nfs_free_seqid(o_arg.seqid); clear_bit(NFS_DELEGATED_STATE, &state->flags); /* Ensure we update the inode attributes */ NFS_CACHEINV(inode); @@ -307,16 +312,20 @@ static int _nfs4_open_delegation_recall(struct dentry *dentry, struct nfs4_state goto out; if (state->state == 0) goto out; - arg.seqid = sp->so_seqid; + arg.seqid = nfs_alloc_seqid(&sp->so_seqid); + status = -ENOMEM; + if (arg.seqid == NULL) + goto out; arg.open_flags = state->state; memcpy(arg.u.delegation.data, state->stateid.data, sizeof(arg.u.delegation.data)); status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - nfs4_increment_seqid(status, sp); + nfs_increment_open_seqid(status, arg.seqid); if (status >= 0) { memcpy(state->stateid.data, res.stateid.data, sizeof(state->stateid.data)); clear_bit(NFS_DELEGATED_STATE, &state->flags); } + nfs_free_seqid(arg.seqid); out: up(&sp->so_sema); dput(parent); @@ -345,11 +354,11 @@ int nfs4_open_delegation_recall(struct dentry *dentry, struct nfs4_state *state) return err; } -static inline int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid) +static inline int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid, struct nfs_seqid *seqid) { struct nfs_open_confirmargs arg = { .fh = fh, - .seqid = sp->so_seqid, + .seqid = seqid, .stateid = *stateid, }; struct nfs_open_confirmres res; @@ -362,7 +371,9 @@ static inline int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nf int status; status = rpc_call_sync(clnt, &msg, RPC_TASK_NOINTR); - nfs4_increment_seqid(status, sp); + /* Confirm the sequence as being established */ + nfs_confirm_seqid(&sp->so_seqid, status); + nfs_increment_open_seqid(status, seqid); if (status >= 0) memcpy(stateid, &res.stateid, sizeof(*stateid)); return status; @@ -380,21 +391,21 @@ static int _nfs4_proc_open(struct inode *dir, struct nfs4_state_owner *sp, stru int status; /* Update sequence id. The caller must serialize! */ - o_arg->seqid = sp->so_seqid; o_arg->id = sp->so_id; o_arg->clientid = sp->so_client->cl_clientid; status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - nfs4_increment_seqid(status, sp); + nfs_increment_open_seqid(status, o_arg->seqid); if (status != 0) goto out; update_changeattr(dir, &o_res->cinfo); if(o_res->rflags & NFS4_OPEN_RESULT_CONFIRM) { status = _nfs4_proc_open_confirm(server->client, &o_res->fh, - sp, &o_res->stateid); + sp, &o_res->stateid, o_arg->seqid); if (status != 0) goto out; } + nfs_confirm_seqid(&sp->so_seqid, 0); if (!(o_res->f_attr->valid & NFS_ATTR_FATTR)) status = server->rpc_ops->getattr(server, &o_res->fh, o_res->f_attr); out: @@ -465,6 +476,10 @@ static int _nfs4_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st set_bit(NFS_DELEGATED_STATE, &state->flags); goto out; } + o_arg.seqid = nfs_alloc_seqid(&sp->so_seqid); + status = -ENOMEM; + if (o_arg.seqid == NULL) + goto out; status = _nfs4_proc_open(dir, sp, &o_arg, &o_res); if (status != 0) goto out_nodeleg; @@ -490,6 +505,7 @@ static int _nfs4_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st nfs_inode_reclaim_delegation(inode, sp->so_cred, &o_res); } out_nodeleg: + nfs_free_seqid(o_arg.seqid); clear_bit(NFS_DELEGATED_STATE, &state->flags); out: dput(parent); @@ -667,6 +683,9 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st /* Serialization for the sequence id */ down(&sp->so_sema); + o_arg.seqid = nfs_alloc_seqid(&sp->so_seqid); + if (o_arg.seqid == NULL) + return -ENOMEM; status = _nfs4_proc_open(dir, sp, &o_arg, &o_res); if (status != 0) goto out_err; @@ -681,6 +700,7 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st update_open_stateid(state, &o_res.stateid, flags); if (o_res.delegation_type != 0) nfs_inode_set_delegation(inode, cred, &o_res); + nfs_free_seqid(o_arg.seqid); up(&sp->so_sema); nfs4_put_state_owner(sp); up_read(&clp->cl_sem); @@ -690,6 +710,7 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st if (sp != NULL) { if (state != NULL) nfs4_put_open_state(state); + nfs_free_seqid(o_arg.seqid); up(&sp->so_sema); nfs4_put_state_owner(sp); } @@ -718,7 +739,7 @@ static struct nfs4_state *nfs4_do_open(struct inode *dir, struct dentry *dentry, * It is actually a sign of a bug on the client or on the server. * * If we receive a BAD_SEQID error in the particular case of - * doing an OPEN, we assume that nfs4_increment_seqid() will + * doing an OPEN, we assume that nfs_increment_open_seqid() will * have unhashed the old state_owner for us, and that we can * therefore safely retry using a new one. We should still warn * the user though... @@ -799,7 +820,7 @@ static void nfs4_close_done(struct rpc_task *task) /* hmm. we are done with the inode, and in the process of freeing * the state_owner. we keep this around to process errors */ - nfs4_increment_seqid(task->tk_status, sp); + nfs_increment_open_seqid(task->tk_status, calldata->arg.seqid); switch (task->tk_status) { case 0: memcpy(&state->stateid, &calldata->res.stateid, @@ -818,6 +839,7 @@ static void nfs4_close_done(struct rpc_task *task) } state->state = calldata->arg.open_flags; nfs4_put_open_state(state); + nfs_free_seqid(calldata->arg.seqid); up(&sp->so_sema); nfs4_put_state_owner(sp); up_read(&server->nfs4_state->cl_sem); @@ -865,7 +887,11 @@ int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode) calldata->state = state; calldata->arg.fh = NFS_FH(inode); /* Serialization for the sequence id */ - calldata->arg.seqid = state->owner->so_seqid; + calldata->arg.seqid = nfs_alloc_seqid(&state->owner->so_seqid); + if (calldata->arg.seqid == NULL) { + kfree(calldata); + return -ENOMEM; + } calldata->arg.open_flags = mode; memcpy(&calldata->arg.stateid, &state->stateid, sizeof(calldata->arg.stateid)); @@ -2729,15 +2755,19 @@ static int _nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock /* We might have lost the locks! */ if ((lsp->ls_flags & NFS_LOCK_INITIALIZED) == 0) goto out; - luargs.seqid = lsp->ls_seqid; - memcpy(&luargs.stateid, &lsp->ls_stateid, sizeof(luargs.stateid)); + luargs.seqid = nfs_alloc_seqid(&lsp->ls_seqid); + status = -ENOMEM; + if (luargs.seqid == NULL) + goto out; + memcpy(luargs.stateid.data, lsp->ls_stateid.data, sizeof(luargs.stateid.data)); arg.u.locku = &luargs; status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - nfs4_increment_lock_seqid(status, lsp); + nfs_increment_lock_seqid(status, luargs.seqid); if (status == 0) - memcpy(&lsp->ls_stateid, &res.u.stateid, - sizeof(lsp->ls_stateid)); + memcpy(lsp->ls_stateid.data, res.u.stateid.data, + sizeof(lsp->ls_stateid.data)); + nfs_free_seqid(luargs.seqid); out: up(&state->lock_sema); if (status == 0) @@ -2783,9 +2813,13 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *r .reclaim = reclaim, .new_lock_owner = 0, }; - int status; + struct nfs_seqid *lock_seqid; + int status = -ENOMEM; - if (!(lsp->ls_flags & NFS_LOCK_INITIALIZED)) { + lock_seqid = nfs_alloc_seqid(&lsp->ls_seqid); + if (lock_seqid == NULL) + return -ENOMEM; + if (!(lsp->ls_seqid.flags & NFS_SEQID_CONFIRMED)) { struct nfs4_state_owner *owner = state->owner; struct nfs_open_to_lock otl = { .lock_owner = { @@ -2793,39 +2827,40 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *r }, }; - otl.lock_seqid = lsp->ls_seqid; + otl.lock_seqid = lock_seqid; otl.lock_owner.id = lsp->ls_id; memcpy(&otl.open_stateid, &state->stateid, sizeof(otl.open_stateid)); largs.u.open_lock = &otl; largs.new_lock_owner = 1; arg.u.lock = &largs; down(&owner->so_sema); - otl.open_seqid = owner->so_seqid; - status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - /* increment open_owner seqid on success, and - * seqid mutating errors */ - nfs4_increment_seqid(status, owner); - up(&owner->so_sema); - if (status == 0) { - lsp->ls_flags |= NFS_LOCK_INITIALIZED; - lsp->ls_seqid++; + otl.open_seqid = nfs_alloc_seqid(&owner->so_seqid); + if (otl.open_seqid != NULL) { + status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); + /* increment seqid on success, and seqid mutating errors */ + nfs_increment_open_seqid(status, otl.open_seqid); + nfs_free_seqid(otl.open_seqid); } + up(&owner->so_sema); + if (status == 0) + nfs_confirm_seqid(&lsp->ls_seqid, 0); } else { - struct nfs_exist_lock el = { - .seqid = lsp->ls_seqid, - }; + struct nfs_exist_lock el; memcpy(&el.stateid, &lsp->ls_stateid, sizeof(el.stateid)); largs.u.exist_lock = ⪙ arg.u.lock = &largs; + el.seqid = lock_seqid; status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - /* increment seqid on success, and * seqid mutating errors*/ - nfs4_increment_lock_seqid(status, lsp); } + /* increment seqid on success, and seqid mutating errors*/ + nfs_increment_lock_seqid(status, lock_seqid); /* save the returned stateid. */ - if (status == 0) - memcpy(&lsp->ls_stateid, &res.u.stateid, sizeof(nfs4_stateid)); - else if (status == -NFS4ERR_DENIED) + if (status == 0) { + memcpy(lsp->ls_stateid.data, res.u.stateid.data, sizeof(lsp->ls_stateid.data)); + lsp->ls_flags |= NFS_LOCK_INITIALIZED; + } else if (status == -NFS4ERR_DENIED) status = -EAGAIN; + nfs_free_seqid(lock_seqid); return status; } diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index afe587d82f1e..f535c219cf3a 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -264,13 +264,16 @@ nfs4_alloc_state_owner(void) { struct nfs4_state_owner *sp; - sp = kmalloc(sizeof(*sp),GFP_KERNEL); + sp = kzalloc(sizeof(*sp),GFP_KERNEL); if (!sp) return NULL; init_MUTEX(&sp->so_sema); - sp->so_seqid = 0; /* arbitrary */ INIT_LIST_HEAD(&sp->so_states); INIT_LIST_HEAD(&sp->so_delegations); + rpc_init_wait_queue(&sp->so_sequence.wait, "Seqid_waitqueue"); + sp->so_seqid.sequence = &sp->so_sequence; + spin_lock_init(&sp->so_sequence.lock); + INIT_LIST_HEAD(&sp->so_sequence.list); atomic_set(&sp->so_count, 1); return sp; } @@ -553,12 +556,10 @@ static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, f struct nfs4_lock_state *lsp; struct nfs4_client *clp = state->owner->so_client; - lsp = kmalloc(sizeof(*lsp), GFP_KERNEL); + lsp = kzalloc(sizeof(*lsp), GFP_KERNEL); if (lsp == NULL) return NULL; - lsp->ls_flags = 0; - lsp->ls_seqid = 0; /* arbitrary */ - memset(lsp->ls_stateid.data, 0, sizeof(lsp->ls_stateid.data)); + lsp->ls_seqid.sequence = &state->owner->so_sequence; atomic_set(&lsp->ls_count, 1); lsp->ls_owner = fl_owner; spin_lock(&clp->cl_lock); @@ -673,29 +674,102 @@ void nfs4_copy_stateid(nfs4_stateid *dst, struct nfs4_state *state, fl_owner_t f nfs4_put_lock_state(lsp); } -/* -* Called with state->lock_sema and clp->cl_sem held. -*/ -void nfs4_increment_lock_seqid(int status, struct nfs4_lock_state *lsp) +struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter) +{ + struct rpc_sequence *sequence = counter->sequence; + struct nfs_seqid *new; + + new = kmalloc(sizeof(*new), GFP_KERNEL); + if (new != NULL) { + new->sequence = counter; + new->task = NULL; + spin_lock(&sequence->lock); + list_add_tail(&new->list, &sequence->list); + spin_unlock(&sequence->lock); + } + return new; +} + +void nfs_free_seqid(struct nfs_seqid *seqid) { - if (status == NFS_OK || seqid_mutating_err(-status)) - lsp->ls_seqid++; + struct rpc_sequence *sequence = seqid->sequence->sequence; + struct rpc_task *next = NULL; + + spin_lock(&sequence->lock); + list_del(&seqid->list); + if (!list_empty(&sequence->list)) { + next = list_entry(sequence->list.next, struct nfs_seqid, list)->task; + if (next) + rpc_wake_up_task(next); + } + spin_unlock(&sequence->lock); + kfree(seqid); } /* -* Called with sp->so_sema and clp->cl_sem held. -* -* Increment the seqid if the OPEN/OPEN_DOWNGRADE/CLOSE succeeded, or -* failed with a seqid incrementing error - -* see comments nfs_fs.h:seqid_mutating_error() -*/ -void nfs4_increment_seqid(int status, struct nfs4_state_owner *sp) -{ - if (status == NFS_OK || seqid_mutating_err(-status)) - sp->so_seqid++; - /* If the server returns BAD_SEQID, unhash state_owner here */ - if (status == -NFS4ERR_BAD_SEQID) + * Called with sp->so_sema and clp->cl_sem held. + * + * Increment the seqid if the OPEN/OPEN_DOWNGRADE/CLOSE succeeded, or + * failed with a seqid incrementing error - + * see comments nfs_fs.h:seqid_mutating_error() + */ +static inline void nfs_increment_seqid(int status, struct nfs_seqid *seqid) +{ + switch (status) { + case 0: + break; + case -NFS4ERR_BAD_SEQID: + case -NFS4ERR_STALE_CLIENTID: + case -NFS4ERR_STALE_STATEID: + case -NFS4ERR_BAD_STATEID: + case -NFS4ERR_BADXDR: + case -NFS4ERR_RESOURCE: + case -NFS4ERR_NOFILEHANDLE: + /* Non-seqid mutating errors */ + return; + }; + /* + * Note: no locking needed as we are guaranteed to be first + * on the sequence list + */ + seqid->sequence->counter++; +} + +void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid) +{ + if (status == -NFS4ERR_BAD_SEQID) { + struct nfs4_state_owner *sp = container_of(seqid->sequence, + struct nfs4_state_owner, so_seqid); nfs4_drop_state_owner(sp); + } + return nfs_increment_seqid(status, seqid); +} + +/* + * Called with ls->lock_sema and clp->cl_sem held. + * + * Increment the seqid if the LOCK/LOCKU succeeded, or + * failed with a seqid incrementing error - + * see comments nfs_fs.h:seqid_mutating_error() + */ +void nfs_increment_lock_seqid(int status, struct nfs_seqid *seqid) +{ + return nfs_increment_seqid(status, seqid); +} + +int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task) +{ + struct rpc_sequence *sequence = seqid->sequence->sequence; + int status = 0; + + spin_lock(&sequence->lock); + if (sequence->list.next != &seqid->list) { + seqid->task = task; + rpc_sleep_on(&sequence->wait, task, NULL, NULL); + status = -EAGAIN; + } + spin_unlock(&sequence->lock); + return status; } static int reclaimer(void *); @@ -791,8 +865,6 @@ static int nfs4_reclaim_open_state(struct nfs4_state_recovery_ops *ops, struct n if (state->state == 0) continue; status = ops->recover_open(sp, state); - list_for_each_entry(lock, &state->lock_states, ls_locks) - lock->ls_flags &= ~NFS_LOCK_INITIALIZED; if (status >= 0) { status = nfs4_reclaim_locks(ops, state); if (status < 0) @@ -831,6 +903,26 @@ static int nfs4_reclaim_open_state(struct nfs4_state_recovery_ops *ops, struct n return status; } +static void nfs4_state_mark_reclaim(struct nfs4_client *clp) +{ + struct nfs4_state_owner *sp; + struct nfs4_state *state; + struct nfs4_lock_state *lock; + + /* Reset all sequence ids to zero */ + list_for_each_entry(sp, &clp->cl_state_owners, so_list) { + sp->so_seqid.counter = 0; + sp->so_seqid.flags = 0; + list_for_each_entry(state, &sp->so_states, open_states) { + list_for_each_entry(lock, &state->lock_states, ls_locks) { + lock->ls_seqid.counter = 0; + lock->ls_seqid.flags = 0; + lock->ls_flags &= ~NFS_LOCK_INITIALIZED; + } + } + } +} + static int reclaimer(void *ptr) { struct reclaimer_args *args = (struct reclaimer_args *)ptr; @@ -864,6 +956,7 @@ static int reclaimer(void *ptr) default: ops = &nfs4_network_partition_recovery_ops; }; + nfs4_state_mark_reclaim(clp); status = __nfs4_init_client(clp); if (status) goto out_error; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 6c564ef9489e..fcd28a29a2f8 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -604,7 +604,7 @@ static int encode_close(struct xdr_stream *xdr, const struct nfs_closeargs *arg) RESERVE_SPACE(8+sizeof(arg->stateid.data)); WRITE32(OP_CLOSE); - WRITE32(arg->seqid); + WRITE32(arg->seqid->sequence->counter); WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data)); return 0; @@ -732,9 +732,9 @@ static int encode_lock(struct xdr_stream *xdr, const struct nfs_lockargs *arg) struct nfs_open_to_lock *ol = opargs->u.open_lock; RESERVE_SPACE(40); - WRITE32(ol->open_seqid); + WRITE32(ol->open_seqid->sequence->counter); WRITEMEM(&ol->open_stateid, sizeof(ol->open_stateid)); - WRITE32(ol->lock_seqid); + WRITE32(ol->lock_seqid->sequence->counter); WRITE64(ol->lock_owner.clientid); WRITE32(4); WRITE32(ol->lock_owner.id); @@ -744,7 +744,7 @@ static int encode_lock(struct xdr_stream *xdr, const struct nfs_lockargs *arg) RESERVE_SPACE(20); WRITEMEM(&el->stateid, sizeof(el->stateid)); - WRITE32(el->seqid); + WRITE32(el->seqid->sequence->counter); } return 0; @@ -775,7 +775,7 @@ static int encode_locku(struct xdr_stream *xdr, const struct nfs_lockargs *arg) RESERVE_SPACE(44); WRITE32(OP_LOCKU); WRITE32(arg->type); - WRITE32(opargs->seqid); + WRITE32(opargs->seqid->sequence->counter); WRITEMEM(&opargs->stateid, sizeof(opargs->stateid)); WRITE64(arg->offset); WRITE64(arg->length); @@ -826,7 +826,7 @@ static inline void encode_openhdr(struct xdr_stream *xdr, const struct nfs_opena */ RESERVE_SPACE(8); WRITE32(OP_OPEN); - WRITE32(arg->seqid); + WRITE32(arg->seqid->sequence->counter); encode_share_access(xdr, arg->open_flags); RESERVE_SPACE(16); WRITE64(arg->clientid); @@ -941,7 +941,7 @@ static int encode_open_confirm(struct xdr_stream *xdr, const struct nfs_open_con RESERVE_SPACE(8+sizeof(arg->stateid.data)); WRITE32(OP_OPEN_CONFIRM); WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data)); - WRITE32(arg->seqid); + WRITE32(arg->seqid->sequence->counter); return 0; } @@ -953,7 +953,7 @@ static int encode_open_downgrade(struct xdr_stream *xdr, const struct nfs_closea RESERVE_SPACE(8+sizeof(arg->stateid.data)); WRITE32(OP_OPEN_DOWNGRADE); WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data)); - WRITE32(arg->seqid); + WRITE32(arg->seqid->sequence->counter); encode_share_access(xdr, arg->open_flags); return 0; } @@ -1416,6 +1416,9 @@ static int nfs4_xdr_enc_close(struct rpc_rqst *req, uint32_t *p, struct nfs_clos }; int status; + status = nfs_wait_on_sequence(args->seqid, req->rq_task); + if (status != 0) + goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -1437,6 +1440,9 @@ static int nfs4_xdr_enc_open(struct rpc_rqst *req, uint32_t *p, struct nfs_opena }; int status; + status = nfs_wait_on_sequence(args->seqid, req->rq_task); + if (status != 0) + goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -1464,6 +1470,9 @@ static int nfs4_xdr_enc_open_confirm(struct rpc_rqst *req, uint32_t *p, struct n }; int status; + status = nfs_wait_on_sequence(args->seqid, req->rq_task); + if (status != 0) + goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -1485,6 +1494,9 @@ static int nfs4_xdr_enc_open_noattr(struct rpc_rqst *req, uint32_t *p, struct nf }; int status; + status = nfs_wait_on_sequence(args->seqid, req->rq_task); + if (status != 0) + goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -1506,6 +1518,9 @@ static int nfs4_xdr_enc_open_downgrade(struct rpc_rqst *req, uint32_t *p, struct }; int status; + status = nfs_wait_on_sequence(args->seqid, req->rq_task); + if (status != 0) + goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -1525,8 +1540,17 @@ static int nfs4_xdr_enc_lock(struct rpc_rqst *req, uint32_t *p, struct nfs_locka struct compound_hdr hdr = { .nops = 2, }; + struct nfs_lock_opargs *opargs = args->u.lock; + struct nfs_seqid *seqid; int status; + if (opargs->new_lock_owner) + seqid = opargs->u.open_lock->lock_seqid; + else + seqid = opargs->u.exist_lock->seqid; + status = nfs_wait_on_sequence(seqid, req->rq_task); + if (status != 0) + goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -1569,6 +1593,9 @@ static int nfs4_xdr_enc_locku(struct rpc_rqst *req, uint32_t *p, struct nfs_lock }; int status; + status = nfs_wait_on_sequence(args->u.locku->seqid, req->rq_task); + if (status != 0) + goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index a2bf6914ff1b..d578912bf9a9 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -96,12 +96,13 @@ struct nfs4_change_info { u64 after; }; +struct nfs_seqid; /* * Arguments to the open call. */ struct nfs_openargs { const struct nfs_fh * fh; - __u32 seqid; + struct nfs_seqid * seqid; int open_flags; __u64 clientid; __u32 id; @@ -136,7 +137,7 @@ struct nfs_openres { struct nfs_open_confirmargs { const struct nfs_fh * fh; nfs4_stateid stateid; - __u32 seqid; + struct nfs_seqid * seqid; }; struct nfs_open_confirmres { @@ -149,7 +150,7 @@ struct nfs_open_confirmres { struct nfs_closeargs { struct nfs_fh * fh; nfs4_stateid stateid; - __u32 seqid; + struct nfs_seqid * seqid; int open_flags; }; @@ -165,15 +166,15 @@ struct nfs_lowner { }; struct nfs_open_to_lock { - __u32 open_seqid; + struct nfs_seqid * open_seqid; nfs4_stateid open_stateid; - __u32 lock_seqid; + struct nfs_seqid * lock_seqid; struct nfs_lowner lock_owner; }; struct nfs_exist_lock { nfs4_stateid stateid; - __u32 seqid; + struct nfs_seqid * seqid; }; struct nfs_lock_opargs { @@ -186,7 +187,7 @@ struct nfs_lock_opargs { }; struct nfs_locku_opargs { - __u32 seqid; + struct nfs_seqid * seqid; nfs4_stateid stateid; }; -- GitLab From 9512135df14f8293b9bc5e8fb22d4279dee5ff66 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:12 -0700 Subject: [PATCH 0258/1519] NFSv4: Fix a potential CLOSE race Once the state_owner and lock_owner semaphores get removed, it will be possible for other OPEN requests to reopen the same file if they have lower sequence ids than our CLOSE call. This patch ensures that we recheck the file state once nfs_wait_on_sequence() has completed waiting. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 110 ++++++++++++++++++++++++++++------------ fs/nfs/nfs4state.c | 6 ++- fs/nfs/nfs4xdr.c | 14 ++--- include/linux/nfs_xdr.h | 2 +- 4 files changed, 87 insertions(+), 45 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 9ba89e7cdd28..5154ddf6d9a5 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -189,6 +189,21 @@ static void update_changeattr(struct inode *inode, struct nfs4_change_info *cinf nfsi->change_attr = cinfo->after; } +/* Helper for asynchronous RPC calls */ +static int nfs4_call_async(struct rpc_clnt *clnt, rpc_action tk_begin, + rpc_action tk_exit, void *calldata) +{ + struct rpc_task *task; + + if (!(task = rpc_new_task(clnt, tk_exit, RPC_TASK_ASYNC))) + return -ENOMEM; + + task->tk_calldata = calldata; + task->tk_action = tk_begin; + rpc_execute(task); + return 0; +} + static void update_open_stateid(struct nfs4_state *state, nfs4_stateid *stateid, int open_flags) { struct inode *inode = state->inode; @@ -810,11 +825,24 @@ struct nfs4_closedata { struct nfs_closeres res; }; +static void nfs4_free_closedata(struct nfs4_closedata *calldata) +{ + struct nfs4_state *state = calldata->state; + struct nfs4_state_owner *sp = state->owner; + struct nfs_server *server = NFS_SERVER(calldata->inode); + + nfs4_put_open_state(calldata->state); + nfs_free_seqid(calldata->arg.seqid); + up(&sp->so_sema); + nfs4_put_state_owner(sp); + up_read(&server->nfs4_state->cl_sem); + kfree(calldata); +} + static void nfs4_close_done(struct rpc_task *task) { struct nfs4_closedata *calldata = (struct nfs4_closedata *)task->tk_calldata; struct nfs4_state *state = calldata->state; - struct nfs4_state_owner *sp = state->owner; struct nfs_server *server = NFS_SERVER(calldata->inode); /* hmm. we are done with the inode, and in the process of freeing @@ -838,25 +866,46 @@ static void nfs4_close_done(struct rpc_task *task) } } state->state = calldata->arg.open_flags; - nfs4_put_open_state(state); - nfs_free_seqid(calldata->arg.seqid); - up(&sp->so_sema); - nfs4_put_state_owner(sp); - up_read(&server->nfs4_state->cl_sem); - kfree(calldata); + nfs4_free_closedata(calldata); } -static inline int nfs4_close_call(struct rpc_clnt *clnt, struct nfs4_closedata *calldata) +static void nfs4_close_begin(struct rpc_task *task) { + struct nfs4_closedata *calldata = (struct nfs4_closedata *)task->tk_calldata; + struct nfs4_state *state = calldata->state; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_CLOSE], .rpc_argp = &calldata->arg, .rpc_resp = &calldata->res, - .rpc_cred = calldata->state->owner->so_cred, + .rpc_cred = state->owner->so_cred, }; - if (calldata->arg.open_flags != 0) + int mode = 0; + int status; + + status = nfs_wait_on_sequence(calldata->arg.seqid, task); + if (status != 0) + return; + /* Don't reorder reads */ + smp_rmb(); + /* Recalculate the new open mode in case someone reopened the file + * while we were waiting in line to be scheduled. + */ + if (state->nreaders != 0) + mode |= FMODE_READ; + if (state->nwriters != 0) + mode |= FMODE_WRITE; + if (test_bit(NFS_DELEGATED_STATE, &state->flags)) + state->state = mode; + if (mode == state->state) { + nfs4_free_closedata(calldata); + task->tk_exit = NULL; + rpc_exit(task, 0); + return; + } + if (mode != 0) msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_OPEN_DOWNGRADE]; - return rpc_call_async(clnt, &msg, 0, nfs4_close_done, calldata); + calldata->arg.open_flags = mode; + rpc_call_setup(task, &msg, 0); } /* @@ -873,35 +922,30 @@ static inline int nfs4_close_call(struct rpc_clnt *clnt, struct nfs4_closedata * int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode) { struct nfs4_closedata *calldata; - int status; + int status = -ENOMEM; - /* Tell caller we're done */ - if (test_bit(NFS_DELEGATED_STATE, &state->flags)) { - state->state = mode; - return 0; - } - calldata = (struct nfs4_closedata *)kmalloc(sizeof(*calldata), GFP_KERNEL); + calldata = kmalloc(sizeof(*calldata), GFP_KERNEL); if (calldata == NULL) - return -ENOMEM; + goto out; calldata->inode = inode; calldata->state = state; calldata->arg.fh = NFS_FH(inode); + calldata->arg.stateid = &state->stateid; /* Serialization for the sequence id */ calldata->arg.seqid = nfs_alloc_seqid(&state->owner->so_seqid); - if (calldata->arg.seqid == NULL) { - kfree(calldata); - return -ENOMEM; - } - calldata->arg.open_flags = mode; - memcpy(&calldata->arg.stateid, &state->stateid, - sizeof(calldata->arg.stateid)); - status = nfs4_close_call(NFS_SERVER(inode)->client, calldata); - /* - * Return -EINPROGRESS on success in order to indicate to the - * caller that an asynchronous RPC call has been launched, and - * that it will release the semaphores on completion. - */ - return (status == 0) ? -EINPROGRESS : status; + if (calldata->arg.seqid == NULL) + goto out_free_calldata; + + status = nfs4_call_async(NFS_SERVER(inode)->client, nfs4_close_begin, + nfs4_close_done, calldata); + if (status == 0) + goto out; + + nfs_free_seqid(calldata->arg.seqid); +out_free_calldata: + kfree(calldata); +out: + return status; } struct inode * diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index f535c219cf3a..59c93f37e1b2 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -518,7 +518,11 @@ void nfs4_close_state(struct nfs4_state *state, mode_t mode) newstate |= FMODE_WRITE; if (state->state == newstate) goto out; - if (nfs4_do_close(inode, state, newstate) == -EINPROGRESS) + if (test_bit(NFS_DELEGATED_STATE, &state->flags)) { + state->state = newstate; + goto out; + } + if (nfs4_do_close(inode, state, newstate) == 0) return; } out: diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index fcd28a29a2f8..934ec50ea6bf 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -602,10 +602,10 @@ static int encode_close(struct xdr_stream *xdr, const struct nfs_closeargs *arg) { uint32_t *p; - RESERVE_SPACE(8+sizeof(arg->stateid.data)); + RESERVE_SPACE(8+sizeof(arg->stateid->data)); WRITE32(OP_CLOSE); WRITE32(arg->seqid->sequence->counter); - WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data)); + WRITEMEM(arg->stateid->data, sizeof(arg->stateid->data)); return 0; } @@ -950,9 +950,9 @@ static int encode_open_downgrade(struct xdr_stream *xdr, const struct nfs_closea { uint32_t *p; - RESERVE_SPACE(8+sizeof(arg->stateid.data)); + RESERVE_SPACE(8+sizeof(arg->stateid->data)); WRITE32(OP_OPEN_DOWNGRADE); - WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data)); + WRITEMEM(arg->stateid->data, sizeof(arg->stateid->data)); WRITE32(arg->seqid->sequence->counter); encode_share_access(xdr, arg->open_flags); return 0; @@ -1416,9 +1416,6 @@ static int nfs4_xdr_enc_close(struct rpc_rqst *req, uint32_t *p, struct nfs_clos }; int status; - status = nfs_wait_on_sequence(args->seqid, req->rq_task); - if (status != 0) - goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -1518,9 +1515,6 @@ static int nfs4_xdr_enc_open_downgrade(struct rpc_rqst *req, uint32_t *p, struct }; int status; - status = nfs_wait_on_sequence(args->seqid, req->rq_task); - if (status != 0) - goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index d578912bf9a9..cac0df950c66 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -149,7 +149,7 @@ struct nfs_open_confirmres { */ struct nfs_closeargs { struct nfs_fh * fh; - nfs4_stateid stateid; + nfs4_stateid * stateid; struct nfs_seqid * seqid; int open_flags; }; -- GitLab From e6dfa553cffcb9740f932311dff42f81d6ac63bb Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:13 -0700 Subject: [PATCH 0259/1519] NFSv4: Remove obsolete state_owner and lock_owner semaphores OPEN, CLOSE, etc no longer need these semaphores to ensure ordering of requests. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 6 ------ fs/nfs/nfs4proc.c | 18 ------------------ fs/nfs/nfs4state.c | 15 ++++----------- 3 files changed, 4 insertions(+), 35 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 6ac6708484f5..d4fcb5d0ce6c 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -125,16 +125,11 @@ static inline void nfs_confirm_seqid(struct nfs_seqid_counter *seqid, int status * NFS4 state_owners and lock_owners are simply labels for ordered * sequences of RPC calls. Their sole purpose is to provide once-only * semantics by allowing the server to identify replayed requests. - * - * The ->so_sema is held during all state_owner seqid-mutating operations: - * OPEN, OPEN_DOWNGRADE, and CLOSE. Its purpose is to properly serialize - * so_seqid. */ struct nfs4_state_owner { struct list_head so_list; /* per-clientid list of state_owners */ struct nfs4_client *so_client; u32 so_id; /* 32-bit identifier, unique */ - struct semaphore so_sema; atomic_t so_count; struct rpc_cred *so_cred; /* Associated cred */ @@ -183,7 +178,6 @@ struct nfs4_state { struct inode *inode; /* Pointer to the inode */ unsigned long flags; /* Do we hold any locks? */ - struct semaphore lock_sema; /* Serializes file locking operations */ spinlock_t state_lock; /* Protects the lock_states list */ nfs4_stateid stateid; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 5154ddf6d9a5..25bab6032dfe 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -224,7 +224,6 @@ static void update_open_stateid(struct nfs4_state *state, nfs4_stateid *stateid, /* * OPEN_RECLAIM: * reclaim state on the server after a reboot. - * Assumes caller is holding the sp->so_sem */ static int _nfs4_open_reclaim(struct nfs4_state_owner *sp, struct nfs4_state *state) { @@ -322,7 +321,6 @@ static int _nfs4_open_delegation_recall(struct dentry *dentry, struct nfs4_state }; int status = 0; - down(&sp->so_sema); if (!test_bit(NFS_DELEGATED_STATE, &state->flags)) goto out; if (state->state == 0) @@ -342,7 +340,6 @@ static int _nfs4_open_delegation_recall(struct dentry *dentry, struct nfs4_state } nfs_free_seqid(arg.seqid); out: - up(&sp->so_sema); dput(parent); return status; } @@ -595,7 +592,6 @@ static int _nfs4_open_delegated(struct inode *inode, int flags, struct rpc_cred dprintk("%s: nfs4_get_state_owner failed!\n", __FUNCTION__); goto out_err; } - down(&sp->so_sema); state = nfs4_get_open_state(inode, sp); if (state == NULL) goto out_err; @@ -620,7 +616,6 @@ static int _nfs4_open_delegated(struct inode *inode, int flags, struct rpc_cred set_bit(NFS_DELEGATED_STATE, &state->flags); update_open_stateid(state, &delegation->stateid, open_flags); out_ok: - up(&sp->so_sema); nfs4_put_state_owner(sp); up_read(&nfsi->rwsem); up_read(&clp->cl_sem); @@ -631,7 +626,6 @@ static int _nfs4_open_delegated(struct inode *inode, int flags, struct rpc_cred if (sp != NULL) { if (state != NULL) nfs4_put_open_state(state); - up(&sp->so_sema); nfs4_put_state_owner(sp); } up_read(&nfsi->rwsem); @@ -696,7 +690,6 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st } else o_arg.u.attrs = sattr; /* Serialization for the sequence id */ - down(&sp->so_sema); o_arg.seqid = nfs_alloc_seqid(&sp->so_seqid); if (o_arg.seqid == NULL) @@ -716,7 +709,6 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st if (o_res.delegation_type != 0) nfs_inode_set_delegation(inode, cred, &o_res); nfs_free_seqid(o_arg.seqid); - up(&sp->so_sema); nfs4_put_state_owner(sp); up_read(&clp->cl_sem); *res = state; @@ -726,7 +718,6 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st if (state != NULL) nfs4_put_open_state(state); nfs_free_seqid(o_arg.seqid); - up(&sp->so_sema); nfs4_put_state_owner(sp); } /* Note: clp->cl_sem must be released before nfs4_put_open_state()! */ @@ -833,7 +824,6 @@ static void nfs4_free_closedata(struct nfs4_closedata *calldata) nfs4_put_open_state(calldata->state); nfs_free_seqid(calldata->arg.seqid); - up(&sp->so_sema); nfs4_put_state_owner(sp); up_read(&server->nfs4_state->cl_sem); kfree(calldata); @@ -2702,7 +2692,6 @@ static int _nfs4_proc_getlk(struct nfs4_state *state, int cmd, struct file_lock down_read(&clp->cl_sem); nlo.clientid = clp->cl_clientid; - down(&state->lock_sema); status = nfs4_set_lock_state(state, request); if (status != 0) goto out; @@ -2729,7 +2718,6 @@ static int _nfs4_proc_getlk(struct nfs4_state *state, int cmd, struct file_lock status = 0; } out: - up(&state->lock_sema); up_read(&clp->cl_sem); return status; } @@ -2791,7 +2779,6 @@ static int _nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock int status; down_read(&clp->cl_sem); - down(&state->lock_sema); status = nfs4_set_lock_state(state, request); if (status != 0) goto out; @@ -2813,7 +2800,6 @@ static int _nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock sizeof(lsp->ls_stateid.data)); nfs_free_seqid(luargs.seqid); out: - up(&state->lock_sema); if (status == 0) do_vfs_lock(request->fl_file, request); up_read(&clp->cl_sem); @@ -2877,7 +2863,6 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *r largs.u.open_lock = &otl; largs.new_lock_owner = 1; arg.u.lock = &largs; - down(&owner->so_sema); otl.open_seqid = nfs_alloc_seqid(&owner->so_seqid); if (otl.open_seqid != NULL) { status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); @@ -2885,7 +2870,6 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *r nfs_increment_open_seqid(status, otl.open_seqid); nfs_free_seqid(otl.open_seqid); } - up(&owner->so_sema); if (status == 0) nfs_confirm_seqid(&lsp->ls_seqid, 0); } else { @@ -2944,11 +2928,9 @@ static int _nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock int status; down_read(&clp->cl_sem); - down(&state->lock_sema); status = nfs4_set_lock_state(state, request); if (status == 0) status = _nfs4_do_setlk(state, cmd, request, 0); - up(&state->lock_sema); if (status == 0) { /* Note: we always want to sleep here! */ request->fl_flags |= FL_SLEEP; diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 59c93f37e1b2..86c08c165ce7 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -267,7 +267,6 @@ nfs4_alloc_state_owner(void) sp = kzalloc(sizeof(*sp),GFP_KERNEL); if (!sp) return NULL; - init_MUTEX(&sp->so_sema); INIT_LIST_HEAD(&sp->so_states); INIT_LIST_HEAD(&sp->so_delegations); rpc_init_wait_queue(&sp->so_sequence.wait, "Seqid_waitqueue"); @@ -362,7 +361,6 @@ nfs4_alloc_open_state(void) memset(state->stateid.data, 0, sizeof(state->stateid.data)); atomic_set(&state->count, 1); INIT_LIST_HEAD(&state->lock_states); - init_MUTEX(&state->lock_sema); spin_lock_init(&state->state_lock); return state; } @@ -444,7 +442,6 @@ nfs4_get_open_state(struct inode *inode, struct nfs4_state_owner *owner) state = __nfs4_find_state_byowner(inode, owner); if (state == NULL && new != NULL) { state = new; - /* Caller *must* be holding owner->so_sem */ /* Note: The reclaim code dictates that we add stateless * and read-only stateids to the end of the list */ list_add_tail(&state->open_states, &owner->so_states); @@ -464,7 +461,7 @@ nfs4_get_open_state(struct inode *inode, struct nfs4_state_owner *owner) /* * Beware! Caller must be holding exactly one - * reference to clp->cl_sem and owner->so_sema! + * reference to clp->cl_sem! */ void nfs4_put_open_state(struct nfs4_state *state) { @@ -485,7 +482,6 @@ void nfs4_put_open_state(struct nfs4_state *state) /* * Beware! Caller must be holding no references to clp->cl_sem! - * of owner->so_sema! */ void nfs4_close_state(struct nfs4_state *state, mode_t mode) { @@ -496,7 +492,6 @@ void nfs4_close_state(struct nfs4_state *state, mode_t mode) atomic_inc(&owner->so_count); down_read(&clp->cl_sem); - down(&owner->so_sema); /* Protect against nfs4_find_state() */ spin_lock(&inode->i_lock); if (mode & FMODE_READ) @@ -527,7 +522,6 @@ void nfs4_close_state(struct nfs4_state *state, mode_t mode) } out: nfs4_put_open_state(state); - up(&owner->so_sema); nfs4_put_state_owner(owner); up_read(&clp->cl_sem); } @@ -553,7 +547,6 @@ __nfs4_find_lock_state(struct nfs4_state *state, fl_owner_t fl_owner) * Return a compatible lock_state. If no initialized lock_state structure * exists, return an uninitialized one. * - * The caller must be holding state->lock_sema */ static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, fl_owner_t fl_owner) { @@ -577,7 +570,7 @@ static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, f * Return a compatible lock_state. If no initialized lock_state structure * exists, return an uninitialized one. * - * The caller must be holding state->lock_sema and clp->cl_sem + * The caller must be holding clp->cl_sem */ static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_owner_t owner) { @@ -711,7 +704,7 @@ void nfs_free_seqid(struct nfs_seqid *seqid) } /* - * Called with sp->so_sema and clp->cl_sem held. + * Called with clp->cl_sem held. * * Increment the seqid if the OPEN/OPEN_DOWNGRADE/CLOSE succeeded, or * failed with a seqid incrementing error - @@ -750,7 +743,7 @@ void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid) } /* - * Called with ls->lock_sema and clp->cl_sem held. + * Called with clp->cl_sem held. * * Increment the seqid if the LOCK/LOCKU succeeded, or * failed with a seqid incrementing error - -- GitLab From 83c9d41e456033000ccfadf535f3098d8739488d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:13 -0700 Subject: [PATCH 0260/1519] NFSv4: Remove nfs4_client->cl_sem from close() path We no longer need to worry about collisions between close() and the state recovery code, since the new close will automatically recheck the file state once it is done waiting on its sequence slot. Ditto for the nfs4_proc_locku() procedure. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 5 ----- fs/nfs/nfs4state.c | 9 +-------- 2 files changed, 1 insertion(+), 13 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 25bab6032dfe..611052bacaff 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -820,12 +820,10 @@ static void nfs4_free_closedata(struct nfs4_closedata *calldata) { struct nfs4_state *state = calldata->state; struct nfs4_state_owner *sp = state->owner; - struct nfs_server *server = NFS_SERVER(calldata->inode); nfs4_put_open_state(calldata->state); nfs_free_seqid(calldata->arg.seqid); nfs4_put_state_owner(sp); - up_read(&server->nfs4_state->cl_sem); kfree(calldata); } @@ -2758,7 +2756,6 @@ static int _nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock { struct inode *inode = state->inode; struct nfs_server *server = NFS_SERVER(inode); - struct nfs4_client *clp = server->nfs4_state; struct nfs_lockargs arg = { .fh = NFS_FH(inode), .type = nfs4_lck_type(cmd, request), @@ -2778,7 +2775,6 @@ static int _nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock struct nfs_locku_opargs luargs; int status; - down_read(&clp->cl_sem); status = nfs4_set_lock_state(state, request); if (status != 0) goto out; @@ -2802,7 +2798,6 @@ static int _nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock out: if (status == 0) do_vfs_lock(request->fl_file, request); - up_read(&clp->cl_sem); return status; } diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 86c08c165ce7..bb3574361958 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -481,17 +481,15 @@ void nfs4_put_open_state(struct nfs4_state *state) } /* - * Beware! Caller must be holding no references to clp->cl_sem! + * Close the current file. */ void nfs4_close_state(struct nfs4_state *state, mode_t mode) { struct inode *inode = state->inode; struct nfs4_state_owner *owner = state->owner; - struct nfs4_client *clp = owner->so_client; int newstate; atomic_inc(&owner->so_count); - down_read(&clp->cl_sem); /* Protect against nfs4_find_state() */ spin_lock(&inode->i_lock); if (mode & FMODE_READ) @@ -523,7 +521,6 @@ void nfs4_close_state(struct nfs4_state *state, mode_t mode) out: nfs4_put_open_state(state); nfs4_put_state_owner(owner); - up_read(&clp->cl_sem); } /* @@ -704,8 +701,6 @@ void nfs_free_seqid(struct nfs_seqid *seqid) } /* - * Called with clp->cl_sem held. - * * Increment the seqid if the OPEN/OPEN_DOWNGRADE/CLOSE succeeded, or * failed with a seqid incrementing error - * see comments nfs_fs.h:seqid_mutating_error() @@ -743,8 +738,6 @@ void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid) } /* - * Called with clp->cl_sem held. - * * Increment the seqid if the LOCK/LOCKU succeeded, or * failed with a seqid incrementing error - * see comments nfs_fs.h:seqid_mutating_error() -- GitLab From 0a8838f972883112f0a7b259141b24db17583c2d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:14 -0700 Subject: [PATCH 0261/1519] NFSv4: Add missing handling of OPEN_CONFIRM requests on CLAIM_DELEGATE_CUR. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 611052bacaff..f57dba815099 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -56,6 +56,7 @@ #define NFS4_POLL_RETRY_MIN (1*HZ) #define NFS4_POLL_RETRY_MAX (15*HZ) +static int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid, struct nfs_seqid *seqid); static int nfs4_do_fsinfo(struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *); static int nfs4_async_handle_error(struct rpc_task *, struct nfs_server *); static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry); @@ -333,11 +334,21 @@ static int _nfs4_open_delegation_recall(struct dentry *dentry, struct nfs4_state memcpy(arg.u.delegation.data, state->stateid.data, sizeof(arg.u.delegation.data)); status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); nfs_increment_open_seqid(status, arg.seqid); + if (status != 0) + goto out_free; + if(res.rflags & NFS4_OPEN_RESULT_CONFIRM) { + status = _nfs4_proc_open_confirm(server->client, NFS_FH(inode), + sp, &res.stateid, arg.seqid); + if (status != 0) + goto out_free; + } + nfs_confirm_seqid(&sp->so_seqid, 0); if (status >= 0) { memcpy(state->stateid.data, res.stateid.data, sizeof(state->stateid.data)); clear_bit(NFS_DELEGATED_STATE, &state->flags); } +out_free: nfs_free_seqid(arg.seqid); out: dput(parent); @@ -366,7 +377,7 @@ int nfs4_open_delegation_recall(struct dentry *dentry, struct nfs4_state *state) return err; } -static inline int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid, struct nfs_seqid *seqid) +static int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid, struct nfs_seqid *seqid) { struct nfs_open_confirmargs arg = { .fh = fh, -- GitLab From faf5f49c2d9c0af2847837c232a432cc146e203b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:15 -0700 Subject: [PATCH 0262/1519] NFSv4: Make NFS clean up byte range locks asynchronously Currently we fail to do so if the process was signalled. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 161 +++++++++++++++++++++++++++------------- fs/nfs/nfs4state.c | 2 +- fs/nfs/nfs4xdr.c | 9 +-- include/linux/nfs_xdr.h | 2 +- 5 files changed, 116 insertions(+), 59 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index d4fcb5d0ce6c..2215cdee43ae 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -249,6 +249,7 @@ extern void nfs4_put_open_state(struct nfs4_state *); extern void nfs4_close_state(struct nfs4_state *, mode_t); extern struct nfs4_state *nfs4_find_state(struct inode *, struct rpc_cred *, mode_t mode); extern void nfs4_schedule_state_recovery(struct nfs4_client *); +extern void nfs4_put_lock_state(struct nfs4_lock_state *lsp); extern int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl); extern void nfs4_copy_stateid(nfs4_stateid *, struct nfs4_state *, fl_owner_t); diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f57dba815099..612a9a14aed3 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -58,9 +58,9 @@ static int _nfs4_proc_open_confirm(struct rpc_clnt *clnt, const struct nfs_fh *fh, struct nfs4_state_owner *sp, nfs4_stateid *stateid, struct nfs_seqid *seqid); static int nfs4_do_fsinfo(struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *); -static int nfs4_async_handle_error(struct rpc_task *, struct nfs_server *); +static int nfs4_async_handle_error(struct rpc_task *, const struct nfs_server *); static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry); -static int nfs4_handle_exception(struct nfs_server *server, int errorcode, struct nfs4_exception *exception); +static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, struct nfs4_exception *exception); extern u32 *nfs4_decode_dirent(u32 *p, struct nfs_entry *entry, int plus); extern struct rpc_procinfo nfs4_procedures[]; @@ -2422,7 +2422,7 @@ static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen } static int -nfs4_async_handle_error(struct rpc_task *task, struct nfs_server *server) +nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server) { struct nfs4_client *clp = server->nfs4_state; @@ -2500,7 +2500,7 @@ static int nfs4_delay(struct rpc_clnt *clnt, long *timeout) /* This is the error handling routine for processes that are allowed * to sleep. */ -int nfs4_handle_exception(struct nfs_server *server, int errorcode, struct nfs4_exception *exception) +int nfs4_handle_exception(const struct nfs_server *server, int errorcode, struct nfs4_exception *exception) { struct nfs4_client *clp = server->nfs4_state; int ret = errorcode; @@ -2763,68 +2763,127 @@ static int do_vfs_lock(struct file *file, struct file_lock *fl) return res; } -static int _nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock *request) +struct nfs4_unlockdata { + struct nfs_lockargs arg; + struct nfs_locku_opargs luargs; + struct nfs_lockres res; + struct nfs4_lock_state *lsp; + struct nfs_open_context *ctx; + atomic_t refcount; + struct completion completion; +}; + +static void nfs4_locku_release_calldata(struct nfs4_unlockdata *calldata) { - struct inode *inode = state->inode; - struct nfs_server *server = NFS_SERVER(inode); - struct nfs_lockargs arg = { - .fh = NFS_FH(inode), - .type = nfs4_lck_type(cmd, request), - .offset = request->fl_start, - .length = nfs4_lck_length(request), - }; - struct nfs_lockres res = { - .server = server, - }; + if (atomic_dec_and_test(&calldata->refcount)) { + nfs_free_seqid(calldata->luargs.seqid); + nfs4_put_lock_state(calldata->lsp); + put_nfs_open_context(calldata->ctx); + kfree(calldata); + } +} + +static void nfs4_locku_complete(struct nfs4_unlockdata *calldata) +{ + complete(&calldata->completion); + nfs4_locku_release_calldata(calldata); +} + +static void nfs4_locku_done(struct rpc_task *task) +{ + struct nfs4_unlockdata *calldata = (struct nfs4_unlockdata *)task->tk_calldata; + + nfs_increment_lock_seqid(task->tk_status, calldata->luargs.seqid); + switch (task->tk_status) { + case 0: + memcpy(calldata->lsp->ls_stateid.data, + calldata->res.u.stateid.data, + sizeof(calldata->lsp->ls_stateid.data)); + break; + case -NFS4ERR_STALE_STATEID: + case -NFS4ERR_EXPIRED: + nfs4_schedule_state_recovery(calldata->res.server->nfs4_state); + break; + default: + if (nfs4_async_handle_error(task, calldata->res.server) == -EAGAIN) { + rpc_restart_call(task); + return; + } + } + nfs4_locku_complete(calldata); +} + +static void nfs4_locku_begin(struct rpc_task *task) +{ + struct nfs4_unlockdata *calldata = (struct nfs4_unlockdata *)task->tk_calldata; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LOCKU], - .rpc_argp = &arg, - .rpc_resp = &res, - .rpc_cred = state->owner->so_cred, + .rpc_argp = &calldata->arg, + .rpc_resp = &calldata->res, + .rpc_cred = calldata->lsp->ls_state->owner->so_cred, }; + int status; + + status = nfs_wait_on_sequence(calldata->luargs.seqid, task); + if (status != 0) + return; + if ((calldata->lsp->ls_flags & NFS_LOCK_INITIALIZED) == 0) { + nfs4_locku_complete(calldata); + task->tk_exit = NULL; + rpc_exit(task, 0); + return; + } + rpc_call_setup(task, &msg, 0); +} + +static int nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock *request) +{ + struct nfs4_unlockdata *calldata; + struct inode *inode = state->inode; + struct nfs_server *server = NFS_SERVER(inode); struct nfs4_lock_state *lsp; - struct nfs_locku_opargs luargs; int status; - + status = nfs4_set_lock_state(state, request); if (status != 0) - goto out; + return status; lsp = request->fl_u.nfs4_fl.owner; /* We might have lost the locks! */ if ((lsp->ls_flags & NFS_LOCK_INITIALIZED) == 0) - goto out; - luargs.seqid = nfs_alloc_seqid(&lsp->ls_seqid); - status = -ENOMEM; - if (luargs.seqid == NULL) - goto out; - memcpy(luargs.stateid.data, lsp->ls_stateid.data, sizeof(luargs.stateid.data)); - arg.u.locku = &luargs; - status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - nfs_increment_lock_seqid(status, luargs.seqid); - - if (status == 0) - memcpy(lsp->ls_stateid.data, res.u.stateid.data, - sizeof(lsp->ls_stateid.data)); - nfs_free_seqid(luargs.seqid); -out: + return 0; + calldata = kmalloc(sizeof(*calldata), GFP_KERNEL); + if (calldata == NULL) + return -ENOMEM; + calldata->luargs.seqid = nfs_alloc_seqid(&lsp->ls_seqid); + if (calldata->luargs.seqid == NULL) { + kfree(calldata); + return -ENOMEM; + } + calldata->luargs.stateid = &lsp->ls_stateid; + calldata->arg.fh = NFS_FH(inode); + calldata->arg.type = nfs4_lck_type(cmd, request); + calldata->arg.offset = request->fl_start; + calldata->arg.length = nfs4_lck_length(request); + calldata->arg.u.locku = &calldata->luargs; + calldata->res.server = server; + calldata->lsp = lsp; + atomic_inc(&lsp->ls_count); + + /* Ensure we don't close file until we're done freeing locks! */ + calldata->ctx = get_nfs_open_context((struct nfs_open_context*)request->fl_file->private_data); + + atomic_set(&calldata->refcount, 2); + init_completion(&calldata->completion); + + status = nfs4_call_async(NFS_SERVER(inode)->client, nfs4_locku_begin, + nfs4_locku_done, calldata); if (status == 0) - do_vfs_lock(request->fl_file, request); + wait_for_completion_interruptible(&calldata->completion); + do_vfs_lock(request->fl_file, request); + nfs4_locku_release_calldata(calldata); return status; } -static int nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock *request) -{ - struct nfs4_exception exception = { }; - int err; - - do { - err = nfs4_handle_exception(NFS_SERVER(state->inode), - _nfs4_proc_unlck(state, cmd, request), - &exception); - } while (exception.retry); - return err; -} - static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *request, int reclaim) { struct inode *inode = state->inode; diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index bb3574361958..23834c8fb740 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -600,7 +600,7 @@ static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_ * Release reference to lock_state, and free it if we see that * it is no longer in use */ -static void nfs4_put_lock_state(struct nfs4_lock_state *lsp) +void nfs4_put_lock_state(struct nfs4_lock_state *lsp) { struct nfs4_state *state; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 934ec50ea6bf..4706192cfb07 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -776,7 +776,7 @@ static int encode_locku(struct xdr_stream *xdr, const struct nfs_lockargs *arg) WRITE32(OP_LOCKU); WRITE32(arg->type); WRITE32(opargs->seqid->sequence->counter); - WRITEMEM(&opargs->stateid, sizeof(opargs->stateid)); + WRITEMEM(opargs->stateid->data, sizeof(opargs->stateid->data)); WRITE64(arg->offset); WRITE64(arg->length); @@ -1587,9 +1587,6 @@ static int nfs4_xdr_enc_locku(struct rpc_rqst *req, uint32_t *p, struct nfs_lock }; int status; - status = nfs_wait_on_sequence(args->u.locku->seqid, req->rq_task); - if (status != 0) - goto out; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -2934,8 +2931,8 @@ static int decode_locku(struct xdr_stream *xdr, struct nfs_lockres *res) status = decode_op_hdr(xdr, OP_LOCKU); if (status == 0) { - READ_BUF(sizeof(nfs4_stateid)); - COPYMEM(&res->u.stateid, sizeof(res->u.stateid)); + READ_BUF(sizeof(res->u.stateid.data)); + COPYMEM(res->u.stateid.data, sizeof(res->u.stateid.data)); } return status; } diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index cac0df950c66..849f95c5fae4 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -188,7 +188,7 @@ struct nfs_lock_opargs { struct nfs_locku_opargs { struct nfs_seqid * seqid; - nfs4_stateid stateid; + nfs4_stateid * stateid; }; struct nfs_lockargs { -- GitLab From 06735b3454824bd561decbde46111f144e905923 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:15 -0700 Subject: [PATCH 0263/1519] NFSv4: Fix up handling of open_to_lock sequence ids Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 69 +++++++++++++++++++---------------------- fs/nfs/nfs4xdr.c | 32 ++++++++----------- include/linux/nfs_xdr.h | 19 +++--------- 3 files changed, 49 insertions(+), 71 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 612a9a14aed3..35da15342e05 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2889,11 +2889,23 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *r struct inode *inode = state->inode; struct nfs_server *server = NFS_SERVER(inode); struct nfs4_lock_state *lsp = request->fl_u.nfs4_fl.owner; + struct nfs_lock_opargs largs = { + .lock_stateid = &lsp->ls_stateid, + .open_stateid = &state->stateid, + .lock_owner = { + .clientid = server->nfs4_state->cl_clientid, + .id = lsp->ls_id, + }, + .reclaim = reclaim, + }; struct nfs_lockargs arg = { .fh = NFS_FH(inode), .type = nfs4_lck_type(cmd, request), .offset = request->fl_start, .length = nfs4_lck_length(request), + .u = { + .lock = &largs, + }, }; struct nfs_lockres res = { .server = server, @@ -2904,56 +2916,39 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *r .rpc_resp = &res, .rpc_cred = state->owner->so_cred, }; - struct nfs_lock_opargs largs = { - .reclaim = reclaim, - .new_lock_owner = 0, - }; - struct nfs_seqid *lock_seqid; int status = -ENOMEM; - lock_seqid = nfs_alloc_seqid(&lsp->ls_seqid); - if (lock_seqid == NULL) + largs.lock_seqid = nfs_alloc_seqid(&lsp->ls_seqid); + if (largs.lock_seqid == NULL) return -ENOMEM; if (!(lsp->ls_seqid.flags & NFS_SEQID_CONFIRMED)) { struct nfs4_state_owner *owner = state->owner; - struct nfs_open_to_lock otl = { - .lock_owner = { - .clientid = server->nfs4_state->cl_clientid, - }, - }; - - otl.lock_seqid = lock_seqid; - otl.lock_owner.id = lsp->ls_id; - memcpy(&otl.open_stateid, &state->stateid, sizeof(otl.open_stateid)); - largs.u.open_lock = &otl; + + largs.open_seqid = nfs_alloc_seqid(&owner->so_seqid); + if (largs.open_seqid == NULL) + goto out; largs.new_lock_owner = 1; - arg.u.lock = &largs; - otl.open_seqid = nfs_alloc_seqid(&owner->so_seqid); - if (otl.open_seqid != NULL) { - status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - /* increment seqid on success, and seqid mutating errors */ - nfs_increment_open_seqid(status, otl.open_seqid); - nfs_free_seqid(otl.open_seqid); + status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); + /* increment open seqid on success, and seqid mutating errors */ + if (largs.new_lock_owner != 0) { + nfs_increment_open_seqid(status, largs.open_seqid); + if (status == 0) + nfs_confirm_seqid(&lsp->ls_seqid, 0); } - if (status == 0) - nfs_confirm_seqid(&lsp->ls_seqid, 0); - } else { - struct nfs_exist_lock el; - memcpy(&el.stateid, &lsp->ls_stateid, sizeof(el.stateid)); - largs.u.exist_lock = ⪙ - arg.u.lock = &largs; - el.seqid = lock_seqid; + nfs_free_seqid(largs.open_seqid); + } else status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); - } - /* increment seqid on success, and seqid mutating errors*/ - nfs_increment_lock_seqid(status, lock_seqid); + /* increment lock seqid on success, and seqid mutating errors*/ + nfs_increment_lock_seqid(status, largs.lock_seqid); /* save the returned stateid. */ if (status == 0) { - memcpy(lsp->ls_stateid.data, res.u.stateid.data, sizeof(lsp->ls_stateid.data)); + memcpy(lsp->ls_stateid.data, res.u.stateid.data, + sizeof(lsp->ls_stateid.data)); lsp->ls_flags |= NFS_LOCK_INITIALIZED; } else if (status == -NFS4ERR_DENIED) status = -EAGAIN; - nfs_free_seqid(lock_seqid); +out: + nfs_free_seqid(largs.lock_seqid); return status; } diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 4706192cfb07..c5c75235c5b8 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -729,22 +729,18 @@ static int encode_lock(struct xdr_stream *xdr, const struct nfs_lockargs *arg) WRITE64(arg->length); WRITE32(opargs->new_lock_owner); if (opargs->new_lock_owner){ - struct nfs_open_to_lock *ol = opargs->u.open_lock; - RESERVE_SPACE(40); - WRITE32(ol->open_seqid->sequence->counter); - WRITEMEM(&ol->open_stateid, sizeof(ol->open_stateid)); - WRITE32(ol->lock_seqid->sequence->counter); - WRITE64(ol->lock_owner.clientid); + WRITE32(opargs->open_seqid->sequence->counter); + WRITEMEM(opargs->open_stateid->data, sizeof(opargs->open_stateid->data)); + WRITE32(opargs->lock_seqid->sequence->counter); + WRITE64(opargs->lock_owner.clientid); WRITE32(4); - WRITE32(ol->lock_owner.id); + WRITE32(opargs->lock_owner.id); } else { - struct nfs_exist_lock *el = opargs->u.exist_lock; - RESERVE_SPACE(20); - WRITEMEM(&el->stateid, sizeof(el->stateid)); - WRITE32(el->seqid->sequence->counter); + WRITEMEM(opargs->lock_stateid->data, sizeof(opargs->lock_stateid->data)); + WRITE32(opargs->lock_seqid->sequence->counter); } return 0; @@ -1535,16 +1531,14 @@ static int nfs4_xdr_enc_lock(struct rpc_rqst *req, uint32_t *p, struct nfs_locka .nops = 2, }; struct nfs_lock_opargs *opargs = args->u.lock; - struct nfs_seqid *seqid; int status; - if (opargs->new_lock_owner) - seqid = opargs->u.open_lock->lock_seqid; - else - seqid = opargs->u.exist_lock->seqid; - status = nfs_wait_on_sequence(seqid, req->rq_task); + status = nfs_wait_on_sequence(opargs->lock_seqid, req->rq_task); if (status != 0) goto out; + /* Do we need to do an open_to_lock_owner? */ + if (opargs->lock_seqid->sequence->flags & NFS_SEQID_CONFIRMED) + opargs->new_lock_owner = 0; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); @@ -2908,8 +2902,8 @@ static int decode_lock(struct xdr_stream *xdr, struct nfs_lockres *res) status = decode_op_hdr(xdr, OP_LOCK); if (status == 0) { - READ_BUF(sizeof(nfs4_stateid)); - COPYMEM(&res->u.stateid, sizeof(res->u.stateid)); + READ_BUF(sizeof(res->u.stateid.data)); + COPYMEM(res->u.stateid.data, sizeof(res->u.stateid.data)); } else if (status == -NFS4ERR_DENIED) return decode_lock_denied(xdr, &res->u.denied); return status; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 849f95c5fae4..57efcc27f20b 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -165,25 +165,14 @@ struct nfs_lowner { u32 id; }; -struct nfs_open_to_lock { - struct nfs_seqid * open_seqid; - nfs4_stateid open_stateid; +struct nfs_lock_opargs { struct nfs_seqid * lock_seqid; + nfs4_stateid * lock_stateid; + struct nfs_seqid * open_seqid; + nfs4_stateid * open_stateid; struct nfs_lowner lock_owner; -}; - -struct nfs_exist_lock { - nfs4_stateid stateid; - struct nfs_seqid * seqid; -}; - -struct nfs_lock_opargs { __u32 reclaim; __u32 new_lock_owner; - union { - struct nfs_open_to_lock *open_lock; - struct nfs_exist_lock *exist_lock; - } u; }; struct nfs_locku_opargs { -- GitLab From 039c4d7a82d8268ec71f59679460b41d0dd9b225 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:16 -0700 Subject: [PATCH 0264/1519] NFS: Fix up a race in the NFS implementation of GETLK ...and fix a memory corruption bug due to improper use of memcpy() on a struct file_lock. Signed-off-by: Trond Myklebust --- fs/nfs/file.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 6bdcfa95de94..572d8593486f 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -376,22 +376,31 @@ nfs_file_write(struct kiocb *iocb, const char __user *buf, size_t count, loff_t static int do_getlk(struct file *filp, int cmd, struct file_lock *fl) { + struct file_lock *cfl; struct inode *inode = filp->f_mapping->host; int status = 0; lock_kernel(); - /* Use local locking if mounted with "-onolock" */ - if (!(NFS_SERVER(inode)->flags & NFS_MOUNT_NONLM)) - status = NFS_PROTO(inode)->lock(filp, cmd, fl); - else { - struct file_lock *cfl = posix_test_lock(filp, fl); - - fl->fl_type = F_UNLCK; - if (cfl != NULL) - memcpy(fl, cfl, sizeof(*fl)); + /* Try local locking first */ + cfl = posix_test_lock(filp, fl); + if (cfl != NULL) { + locks_copy_lock(fl, cfl); + goto out; } + + if (nfs_have_delegation(inode, FMODE_READ)) + goto out_noconflict; + + if (NFS_SERVER(inode)->flags & NFS_MOUNT_NONLM) + goto out_noconflict; + + status = NFS_PROTO(inode)->lock(filp, cmd, fl); +out: unlock_kernel(); return status; +out_noconflict: + fl->fl_type = F_UNLCK; + goto out; } static int do_vfs_lock(struct file *file, struct file_lock *fl) -- GitLab From 834f2a4a1554dc5b2598038b3fe8703defcbe467 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:16 -0700 Subject: [PATCH 0265/1519] VFS: Allow the filesystem to return a full file pointer on open intent This is needed by NFSv4 for atomicity reasons: our open command is in fact a lookup+open, so we need to be able to propagate open context information from lookup() into the resulting struct file's private_data field. Signed-off-by: Trond Myklebust --- fs/exec.c | 12 +++--- fs/namei.c | 93 +++++++++++++++++++++++++++++++++++++++---- fs/open.c | 79 +++++++++++++++++++++++++++++------- include/linux/namei.h | 8 ++++ 4 files changed, 165 insertions(+), 27 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index a04a575ad433..d2208f7c87db 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -126,8 +126,7 @@ asmlinkage long sys_uselib(const char __user * library) struct nameidata nd; int error; - nd.intent.open.flags = FMODE_READ; - error = __user_walk(library, LOOKUP_FOLLOW|LOOKUP_OPEN, &nd); + error = __user_path_lookup_open(library, LOOKUP_FOLLOW, &nd, FMODE_READ); if (error) goto out; @@ -139,7 +138,7 @@ asmlinkage long sys_uselib(const char __user * library) if (error) goto exit; - file = dentry_open(nd.dentry, nd.mnt, O_RDONLY); + file = nameidata_to_filp(&nd, O_RDONLY); error = PTR_ERR(file); if (IS_ERR(file)) goto out; @@ -167,6 +166,7 @@ asmlinkage long sys_uselib(const char __user * library) out: return error; exit: + release_open_intent(&nd); path_release(&nd); goto out; } @@ -490,8 +490,7 @@ struct file *open_exec(const char *name) int err; struct file *file; - nd.intent.open.flags = FMODE_READ; - err = path_lookup(name, LOOKUP_FOLLOW|LOOKUP_OPEN, &nd); + err = path_lookup_open(name, LOOKUP_FOLLOW, &nd, FMODE_READ); file = ERR_PTR(err); if (!err) { @@ -504,7 +503,7 @@ struct file *open_exec(const char *name) err = -EACCES; file = ERR_PTR(err); if (!err) { - file = dentry_open(nd.dentry, nd.mnt, O_RDONLY); + file = nameidata_to_filp(&nd, O_RDONLY); if (!IS_ERR(file)) { err = deny_write_access(file); if (err) { @@ -516,6 +515,7 @@ struct file *open_exec(const char *name) return file; } } + release_open_intent(&nd); path_release(&nd); } goto out; diff --git a/fs/namei.c b/fs/namei.c index aa62dbda93ac..0d1dff7d3d95 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -317,6 +318,18 @@ void path_release_on_umount(struct nameidata *nd) mntput_no_expire(nd->mnt); } +/** + * release_open_intent - free up open intent resources + * @nd: pointer to nameidata + */ +void release_open_intent(struct nameidata *nd) +{ + if (nd->intent.open.file->f_dentry == NULL) + put_filp(nd->intent.open.file); + else + fput(nd->intent.open.file); +} + /* * Internal lookup() using the new generic dcache. * SMP-safe @@ -1052,6 +1065,70 @@ int fastcall path_lookup(const char *name, unsigned int flags, struct nameidata return retval; } +static int __path_lookup_intent_open(const char *name, unsigned int lookup_flags, + struct nameidata *nd, int open_flags, int create_mode) +{ + struct file *filp = get_empty_filp(); + int err; + + if (filp == NULL) + return -ENFILE; + nd->intent.open.file = filp; + nd->intent.open.flags = open_flags; + nd->intent.open.create_mode = create_mode; + err = path_lookup(name, lookup_flags|LOOKUP_OPEN, nd); + if (IS_ERR(nd->intent.open.file)) { + if (err == 0) { + err = PTR_ERR(nd->intent.open.file); + path_release(nd); + } + } else if (err != 0) + release_open_intent(nd); + return err; +} + +/** + * path_lookup_open - lookup a file path with open intent + * @name: pointer to file name + * @lookup_flags: lookup intent flags + * @nd: pointer to nameidata + * @open_flags: open intent flags + */ +int path_lookup_open(const char *name, unsigned int lookup_flags, + struct nameidata *nd, int open_flags) +{ + return __path_lookup_intent_open(name, lookup_flags, nd, + open_flags, 0); +} + +/** + * path_lookup_create - lookup a file path with open + create intent + * @name: pointer to file name + * @lookup_flags: lookup intent flags + * @nd: pointer to nameidata + * @open_flags: open intent flags + * @create_mode: create intent flags + */ +int path_lookup_create(const char *name, unsigned int lookup_flags, + struct nameidata *nd, int open_flags, int create_mode) +{ + return __path_lookup_intent_open(name, lookup_flags|LOOKUP_CREATE, nd, + open_flags, create_mode); +} + +int __user_path_lookup_open(const char __user *name, unsigned int lookup_flags, + struct nameidata *nd, int open_flags) +{ + char *tmp = getname(name); + int err = PTR_ERR(tmp); + + if (!IS_ERR(tmp)) { + err = __path_lookup_intent_open(tmp, lookup_flags, nd, open_flags, 0); + putname(tmp); + } + return err; +} + /* * Restricted form of lookup. Doesn't follow links, single-component only, * needs parent already locked. Doesn't follow mounts. @@ -1416,27 +1493,27 @@ int may_open(struct nameidata *nd, int acc_mode, int flag) */ int open_namei(const char * pathname, int flag, int mode, struct nameidata *nd) { - int acc_mode, error = 0; + int acc_mode, error; struct path path; struct dentry *dir; int count = 0; acc_mode = ACC_MODE(flag); + /* O_TRUNC implies we need access checks for write permissions */ + if (flag & O_TRUNC) + acc_mode |= MAY_WRITE; + /* Allow the LSM permission hook to distinguish append access from general write access. */ if (flag & O_APPEND) acc_mode |= MAY_APPEND; - /* Fill in the open() intent data */ - nd->intent.open.flags = flag; - nd->intent.open.create_mode = mode; - /* * The simplest case - just a plain lookup. */ if (!(flag & O_CREAT)) { - error = path_lookup(pathname, lookup_flags(flag)|LOOKUP_OPEN, nd); + error = path_lookup_open(pathname, lookup_flags(flag), nd, flag); if (error) return error; goto ok; @@ -1445,7 +1522,7 @@ int open_namei(const char * pathname, int flag, int mode, struct nameidata *nd) /* * Create - we need to know the parent. */ - error = path_lookup(pathname, LOOKUP_PARENT|LOOKUP_OPEN|LOOKUP_CREATE, nd); + error = path_lookup_create(pathname, LOOKUP_PARENT, nd, flag, mode); if (error) return error; @@ -1520,6 +1597,8 @@ int open_namei(const char * pathname, int flag, int mode, struct nameidata *nd) exit_dput: dput_path(&path, nd); exit: + if (!IS_ERR(nd->intent.open.file)) + release_open_intent(nd); path_release(nd); return error; diff --git a/fs/open.c b/fs/open.c index f0d90cf0495c..8d06ec911fd9 100644 --- a/fs/open.c +++ b/fs/open.c @@ -739,7 +739,8 @@ asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group) } static struct file *__dentry_open(struct dentry *dentry, struct vfsmount *mnt, - int flags, struct file *f) + int flags, struct file *f, + int (*open)(struct inode *, struct file *)) { struct inode *inode; int error; @@ -761,11 +762,14 @@ static struct file *__dentry_open(struct dentry *dentry, struct vfsmount *mnt, f->f_op = fops_get(inode->i_fop); file_move(f, &inode->i_sb->s_files); - if (f->f_op && f->f_op->open) { - error = f->f_op->open(inode,f); + if (!open && f->f_op) + open = f->f_op->open; + if (open) { + error = open(inode, f); if (error) goto cleanup_all; } + f->f_flags &= ~(O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC); file_ra_state_init(&f->f_ra, f->f_mapping->host->i_mapping); @@ -814,28 +818,75 @@ struct file *filp_open(const char * filename, int flags, int mode) { int namei_flags, error; struct nameidata nd; - struct file *f; namei_flags = flags; if ((namei_flags+1) & O_ACCMODE) namei_flags++; - if (namei_flags & O_TRUNC) - namei_flags |= 2; - - error = -ENFILE; - f = get_empty_filp(); - if (f == NULL) - return ERR_PTR(error); error = open_namei(filename, namei_flags, mode, &nd); if (!error) - return __dentry_open(nd.dentry, nd.mnt, flags, f); + return nameidata_to_filp(&nd, flags); - put_filp(f); return ERR_PTR(error); } EXPORT_SYMBOL(filp_open); +/** + * lookup_instantiate_filp - instantiates the open intent filp + * @nd: pointer to nameidata + * @dentry: pointer to dentry + * @open: open callback + * + * Helper for filesystems that want to use lookup open intents and pass back + * a fully instantiated struct file to the caller. + * This function is meant to be called from within a filesystem's + * lookup method. + * Note that in case of error, nd->intent.open.file is destroyed, but the + * path information remains valid. + * If the open callback is set to NULL, then the standard f_op->open() + * filesystem callback is substituted. + */ +struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry, + int (*open)(struct inode *, struct file *)) +{ + if (IS_ERR(nd->intent.open.file)) + goto out; + if (IS_ERR(dentry)) + goto out_err; + nd->intent.open.file = __dentry_open(dget(dentry), mntget(nd->mnt), + nd->intent.open.flags - 1, + nd->intent.open.file, + open); +out: + return nd->intent.open.file; +out_err: + release_open_intent(nd); + nd->intent.open.file = (struct file *)dentry; + goto out; +} +EXPORT_SYMBOL_GPL(lookup_instantiate_filp); + +/** + * nameidata_to_filp - convert a nameidata to an open filp. + * @nd: pointer to nameidata + * @flags: open flags + * + * Note that this function destroys the original nameidata + */ +struct file *nameidata_to_filp(struct nameidata *nd, int flags) +{ + struct file *filp; + + /* Pick up the filp from the open intent */ + filp = nd->intent.open.file; + /* Has the filesystem initialised the file for us? */ + if (filp->f_dentry == NULL) + filp = __dentry_open(nd->dentry, nd->mnt, flags, filp, NULL); + else + path_release(nd); + return filp; +} + struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags) { int error; @@ -846,7 +897,7 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags) if (f == NULL) return ERR_PTR(error); - return __dentry_open(dentry, mnt, flags, f); + return __dentry_open(dentry, mnt, flags, f, NULL); } EXPORT_SYMBOL(dentry_open); diff --git a/include/linux/namei.h b/include/linux/namei.h index 7db67b008cac..1c975d0d9e94 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -8,6 +8,7 @@ struct vfsmount; struct open_intent { int flags; int create_mode; + struct file *file; }; enum { MAX_NESTED_LINKS = 5 }; @@ -65,6 +66,13 @@ extern int FASTCALL(link_path_walk(const char *, struct nameidata *)); extern void path_release(struct nameidata *); extern void path_release_on_umount(struct nameidata *); +extern int __user_path_lookup_open(const char __user *, unsigned lookup_flags, struct nameidata *nd, int open_flags); +extern int path_lookup_open(const char *, unsigned lookup_flags, struct nameidata *, int open_flags); +extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry, + int (*open)(struct inode *, struct file *)); +extern struct file *nameidata_to_filp(struct nameidata *nd, int flags); +extern void release_open_intent(struct nameidata *); + extern struct dentry * lookup_one_len(const char *, struct dentry *, int); extern struct dentry * lookup_hash(struct qstr *, struct dentry *); -- GitLab From 02a913a73b52071e93f4b76db3e86138d19efffd Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:17 -0700 Subject: [PATCH 0266/1519] NFSv4: Eliminate nfsv4 open race... Make NFSv4 return the fully initialized file pointer with the stateid that it created in the lookup w/intent. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 29 ++++----- fs/nfs/nfs3proc.c | 2 +- fs/nfs/nfs4_fs.h | 4 +- fs/nfs/nfs4proc.c | 137 ++++++++++++++++------------------------ fs/nfs/proc.c | 2 +- include/linux/nfs_xdr.h | 2 +- 6 files changed, 74 insertions(+), 102 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index c70eabd6d179..a6e251f21fd8 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -914,7 +914,6 @@ static int is_atomic_open(struct inode *dir, struct nameidata *nd) static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd) { struct dentry *res = NULL; - struct inode *inode = NULL; int error; /* Check that we are indeed trying to open this file */ @@ -928,8 +927,10 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry dentry->d_op = NFS_PROTO(dir)->dentry_ops; /* Let vfs_create() deal with O_EXCL */ - if (nd->intent.open.flags & O_EXCL) - goto no_entry; + if (nd->intent.open.flags & O_EXCL) { + d_add(dentry, NULL); + goto out; + } /* Open the file on the server */ lock_kernel(); @@ -943,18 +944,18 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry if (nd->intent.open.flags & O_CREAT) { nfs_begin_data_update(dir); - inode = nfs4_atomic_open(dir, dentry, nd); + res = nfs4_atomic_open(dir, dentry, nd); nfs_end_data_update(dir); } else - inode = nfs4_atomic_open(dir, dentry, nd); + res = nfs4_atomic_open(dir, dentry, nd); unlock_kernel(); - if (IS_ERR(inode)) { - error = PTR_ERR(inode); + if (IS_ERR(res)) { + error = PTR_ERR(res); switch (error) { /* Make a negative dentry */ case -ENOENT: - inode = NULL; - break; + res = NULL; + goto out; /* This turned out not to be a regular file */ case -ELOOP: if (!(nd->intent.open.flags & O_NOFOLLOW)) @@ -962,13 +963,9 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry /* case -EISDIR: */ /* case -EINVAL: */ default: - res = ERR_PTR(error); goto out; } - } -no_entry: - res = d_add_unique(dentry, inode); - if (res != NULL) + } else if (res != NULL) dentry = res; nfs_renew_times(dentry); nfs_set_verifier(dentry, nfs_save_change_attribute(dir)); @@ -1012,7 +1009,7 @@ static int nfs_open_revalidate(struct dentry *dentry, struct nameidata *nd) */ lock_kernel(); verifier = nfs_save_change_attribute(dir); - ret = nfs4_open_revalidate(dir, dentry, openflags); + ret = nfs4_open_revalidate(dir, dentry, openflags, nd); if (!ret) nfs_set_verifier(dentry, verifier); unlock_kernel(); @@ -1135,7 +1132,7 @@ static int nfs_create(struct inode *dir, struct dentry *dentry, int mode, lock_kernel(); nfs_begin_data_update(dir); - error = NFS_PROTO(dir)->create(dir, dentry, &attr, open_flags); + error = NFS_PROTO(dir)->create(dir, dentry, &attr, open_flags, nd); nfs_end_data_update(dir); if (error != 0) goto out_err; diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index edc95514046d..df80477c5af4 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -299,7 +299,7 @@ static int nfs3_proc_commit(struct nfs_write_data *cdata) */ static int nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, - int flags) + int flags, struct nameidata *nd) { struct nfs_fh fhandle; struct nfs_fattr fattr; diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 2215cdee43ae..8a3788199052 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -215,8 +215,8 @@ extern int nfs4_proc_setclientid_confirm(struct nfs4_client *); extern int nfs4_proc_async_renew(struct nfs4_client *); extern int nfs4_proc_renew(struct nfs4_client *); extern int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode); -extern struct inode *nfs4_atomic_open(struct inode *, struct dentry *, struct nameidata *); -extern int nfs4_open_revalidate(struct inode *, struct dentry *, int); +extern struct dentry *nfs4_atomic_open(struct inode *, struct dentry *, struct nameidata *); +extern int nfs4_open_revalidate(struct inode *, struct dentry *, int, struct nameidata *); extern struct nfs4_state_recovery_ops nfs4_reboot_recovery_ops; extern struct nfs4_state_recovery_ops nfs4_network_partition_recovery_ops; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 35da15342e05..c9ecb8119632 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -47,6 +47,7 @@ #include #include #include +#include #include "nfs4_fs.h" #include "delegation.h" @@ -947,12 +948,26 @@ int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode) return status; } -struct inode * +static void nfs4_intent_set_file(struct nameidata *nd, struct dentry *dentry, struct nfs4_state *state) +{ + struct file *filp; + + filp = lookup_instantiate_filp(nd, dentry, NULL); + if (!IS_ERR(filp)) { + struct nfs_open_context *ctx; + ctx = (struct nfs_open_context *)filp->private_data; + ctx->state = state; + } else + nfs4_close_state(state, nd->intent.open.flags); +} + +struct dentry * nfs4_atomic_open(struct inode *dir, struct dentry *dentry, struct nameidata *nd) { struct iattr attr; struct rpc_cred *cred; struct nfs4_state *state; + struct dentry *res; if (nd->flags & LOOKUP_CREATE) { attr.ia_mode = nd->intent.open.create_mode; @@ -966,16 +981,23 @@ nfs4_atomic_open(struct inode *dir, struct dentry *dentry, struct nameidata *nd) cred = rpcauth_lookupcred(NFS_SERVER(dir)->client->cl_auth, 0); if (IS_ERR(cred)) - return (struct inode *)cred; + return (struct dentry *)cred; state = nfs4_do_open(dir, dentry, nd->intent.open.flags, &attr, cred); put_rpccred(cred); - if (IS_ERR(state)) - return (struct inode *)state; - return state->inode; + if (IS_ERR(state)) { + if (PTR_ERR(state) == -ENOENT) + d_add(dentry, NULL); + return (struct dentry *)state; + } + res = d_add_unique(dentry, state->inode); + if (res != NULL) + dentry = res; + nfs4_intent_set_file(nd, dentry, state); + return res; } int -nfs4_open_revalidate(struct inode *dir, struct dentry *dentry, int openflags) +nfs4_open_revalidate(struct inode *dir, struct dentry *dentry, int openflags, struct nameidata *nd) { struct rpc_cred *cred; struct nfs4_state *state; @@ -988,18 +1010,30 @@ nfs4_open_revalidate(struct inode *dir, struct dentry *dentry, int openflags) if (IS_ERR(state)) state = nfs4_do_open(dir, dentry, openflags, NULL, cred); put_rpccred(cred); - if (state == ERR_PTR(-ENOENT) && dentry->d_inode == 0) - return 1; - if (IS_ERR(state)) - return 0; + if (IS_ERR(state)) { + switch (PTR_ERR(state)) { + case -EPERM: + case -EACCES: + case -EDQUOT: + case -ENOSPC: + case -EROFS: + lookup_instantiate_filp(nd, (struct dentry *)state, NULL); + return 1; + case -ENOENT: + if (dentry->d_inode == NULL) + return 1; + } + goto out_drop; + } inode = state->inode; + iput(inode); if (inode == dentry->d_inode) { - iput(inode); + nfs4_intent_set_file(nd, dentry, state); return 1; } - d_drop(dentry); nfs4_close_state(state, openflags); - iput(inode); +out_drop: + d_drop(dentry); return 0; } @@ -1500,7 +1534,7 @@ static int nfs4_proc_commit(struct nfs_write_data *cdata) static int nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, - int flags) + int flags, struct nameidata *nd) { struct nfs4_state *state; struct rpc_cred *cred; @@ -1522,13 +1556,13 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, struct nfs_fattr fattr; status = nfs4_do_setattr(NFS_SERVER(dir), &fattr, NFS_FH(state->inode), sattr, state); - if (status == 0) { + if (status == 0) nfs_setattr_update_inode(state->inode, sattr); - goto out; - } - } else if (flags != 0) - goto out; - nfs4_close_state(state, flags); + } + if (status == 0 && nd != NULL && (nd->flags & LOOKUP_OPEN)) + nfs4_intent_set_file(nd, dentry, state); + else + nfs4_close_state(state, flags); out: return status; } @@ -2175,65 +2209,6 @@ nfs4_proc_renew(struct nfs4_client *clp) return 0; } -/* - * We will need to arrange for the VFS layer to provide an atomic open. - * Until then, this open method is prone to inefficiency and race conditions - * due to the lookup, potential create, and open VFS calls from sys_open() - * placed on the wire. - */ -static int -nfs4_proc_file_open(struct inode *inode, struct file *filp) -{ - struct dentry *dentry = filp->f_dentry; - struct nfs_open_context *ctx; - struct nfs4_state *state = NULL; - struct rpc_cred *cred; - int status = -ENOMEM; - - dprintk("nfs4_proc_file_open: starting on (%.*s/%.*s)\n", - (int)dentry->d_parent->d_name.len, - dentry->d_parent->d_name.name, - (int)dentry->d_name.len, dentry->d_name.name); - - - /* Find our open stateid */ - cred = rpcauth_lookupcred(NFS_SERVER(inode)->client->cl_auth, 0); - if (IS_ERR(cred)) - return PTR_ERR(cred); - ctx = alloc_nfs_open_context(dentry, cred); - put_rpccred(cred); - if (unlikely(ctx == NULL)) - return -ENOMEM; - status = -EIO; /* ERACE actually */ - state = nfs4_find_state(inode, cred, filp->f_mode); - if (unlikely(state == NULL)) - goto no_state; - ctx->state = state; - nfs4_close_state(state, filp->f_mode); - ctx->mode = filp->f_mode; - nfs_file_set_open_context(filp, ctx); - put_nfs_open_context(ctx); - if (filp->f_mode & FMODE_WRITE) - nfs_begin_data_update(inode); - return 0; -no_state: - printk(KERN_WARNING "NFS: v4 raced in function %s\n", __FUNCTION__); - put_nfs_open_context(ctx); - return status; -} - -/* - * Release our state - */ -static int -nfs4_proc_file_release(struct inode *inode, struct file *filp) -{ - if (filp->f_mode & FMODE_WRITE) - nfs_end_data_update(inode); - nfs_file_clear_open_context(filp); - return 0; -} - static inline int nfs4_server_supports_acls(struct nfs_server *server) { return (server->caps & NFS_CAP_ACLS) @@ -3145,8 +3120,8 @@ struct nfs_rpc_ops nfs_v4_clientops = { .read_setup = nfs4_proc_read_setup, .write_setup = nfs4_proc_write_setup, .commit_setup = nfs4_proc_commit_setup, - .file_open = nfs4_proc_file_open, - .file_release = nfs4_proc_file_release, + .file_open = nfs_open, + .file_release = nfs_release, .lock = nfs4_proc_lock, .clear_acl_cache = nfs4_zap_acl_attr, }; diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c index be23c3fb9260..8fef86523d7f 100644 --- a/fs/nfs/proc.c +++ b/fs/nfs/proc.c @@ -216,7 +216,7 @@ static int nfs_proc_write(struct nfs_write_data *wdata) static int nfs_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, - int flags) + int flags, struct nameidata *nd) { struct nfs_fh fhandle; struct nfs_fattr fattr; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 57efcc27f20b..60086dac11d5 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -712,7 +712,7 @@ struct nfs_rpc_ops { int (*write) (struct nfs_write_data *); int (*commit) (struct nfs_write_data *); int (*create) (struct inode *, struct dentry *, - struct iattr *, int); + struct iattr *, int, struct nameidata *); int (*remove) (struct inode *, struct qstr *); int (*unlink_setup) (struct rpc_message *, struct dentry *, struct qstr *); -- GitLab From 6f926b5ba75c568296ec227e7d782db4ddbdca5c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:18 -0700 Subject: [PATCH 0267/1519] [NFS]: Check that the server returns a valid regular file to our OPEN request Since it appears that some servers don't... Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 4 +++- fs/nfs/nfs4proc.c | 16 ++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index a6e251f21fd8..ac331d2d4c4a 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -957,10 +957,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry res = NULL; goto out; /* This turned out not to be a regular file */ + case -EISDIR: + case -ENOTDIR: + goto no_open; case -ELOOP: if (!(nd->intent.open.flags & O_NOFOLLOW)) goto no_open; - /* case -EISDIR: */ /* case -EINVAL: */ default: goto out; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index c9ecb8119632..3db1c9f0b09c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -419,6 +419,22 @@ static int _nfs4_proc_open(struct inode *dir, struct nfs4_state_owner *sp, stru o_arg->clientid = sp->so_client->cl_clientid; status = rpc_call_sync(server->client, &msg, RPC_TASK_NOINTR); + if (status == 0) { + /* OPEN on anything except a regular file is disallowed in NFSv4 */ + switch (o_res->f_attr->mode & S_IFMT) { + case S_IFREG: + break; + case S_IFLNK: + status = -ELOOP; + break; + case S_IFDIR: + status = -EISDIR; + break; + default: + status = -ENOTDIR; + } + } + nfs_increment_open_seqid(status, o_arg->seqid); if (status != 0) goto out; -- GitLab From cdce5d6b94b6182f6d8a5b7b52923933e98cbc92 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:18 -0700 Subject: [PATCH 0268/1519] VFS: Make link_path_walk set LOOKUP_CONTINUE before calling permission(). This will allow nfs_permission() to perform additional optimizations when walking the path, by folding the ACCESS(MAY_EXEC) call on the directory into the lookup revalidation. Signed-off-by: Trond Myklebust --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 0d1dff7d3d95..aaaa81036234 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -763,6 +763,7 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) struct qstr this; unsigned int c; + nd->flags |= LOOKUP_CONTINUE; err = exec_permission_lite(inode, nd); if (err == -EAGAIN) { err = permission(inode, MAY_EXEC, nd); @@ -815,7 +816,6 @@ static fastcall int __link_path_walk(const char * name, struct nameidata *nd) if (err < 0) break; } - nd->flags |= LOOKUP_CONTINUE; /* This does the actual lookups.. */ err = do_lookup(nd, &this, &next); if (err) -- GitLab From cae7a073a4c5484cc5713eab606bf54b46724ab3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:19 -0700 Subject: [PATCH 0269/1519] NFSv4: Return delegation upon rename or removal of file. Signed-off-by: Trond Myklebust --- fs/nfs/delegation.c | 2 +- fs/nfs/delegation.h | 16 +++++++++++++++- fs/nfs/dir.c | 3 +++ fs/nfs/inode.c | 3 +-- 4 files changed, 20 insertions(+), 4 deletions(-) diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 4a36839f0bbd..44135af9894c 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -142,7 +142,7 @@ static void nfs_msync_inode(struct inode *inode) /* * Basic procedure for returning a delegation to the server */ -int nfs_inode_return_delegation(struct inode *inode) +int __nfs_inode_return_delegation(struct inode *inode) { struct nfs4_client *clp = NFS_SERVER(inode)->nfs4_state; struct nfs_inode *nfsi = NFS_I(inode); diff --git a/fs/nfs/delegation.h b/fs/nfs/delegation.h index 3f6c45a29d6a..8017846b561f 100644 --- a/fs/nfs/delegation.h +++ b/fs/nfs/delegation.h @@ -25,7 +25,7 @@ struct nfs_delegation { int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res); void nfs_inode_reclaim_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res); -int nfs_inode_return_delegation(struct inode *inode); +int __nfs_inode_return_delegation(struct inode *inode); int nfs_async_inode_return_delegation(struct inode *inode, const nfs4_stateid *stateid); struct inode *nfs_delegation_find_inode(struct nfs4_client *clp, const struct nfs_fh *fhandle); @@ -47,11 +47,25 @@ static inline int nfs_have_delegation(struct inode *inode, int flags) return 1; return 0; } + +static inline int nfs_inode_return_delegation(struct inode *inode) +{ + int err = 0; + + if (NFS_I(inode)->delegation != NULL) + err = __nfs_inode_return_delegation(inode); + return err; +} #else static inline int nfs_have_delegation(struct inode *inode, int flags) { return 0; } + +static inline int nfs_inode_return_delegation(struct inode *inode) +{ + return 0; +} #endif #endif diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index ac331d2d4c4a..72f50c0117b1 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -801,6 +801,7 @@ static int nfs_dentry_delete(struct dentry *dentry) */ static void nfs_dentry_iput(struct dentry *dentry, struct inode *inode) { + nfs_inode_return_delegation(inode); if (dentry->d_flags & DCACHE_NFSFS_RENAMED) { lock_kernel(); inode->i_nlink--; @@ -1329,6 +1330,7 @@ static int nfs_safe_remove(struct dentry *dentry) nfs_begin_data_update(dir); if (inode != NULL) { + nfs_inode_return_delegation(inode); nfs_begin_data_update(inode); error = NFS_PROTO(dir)->remove(dir, &dentry->d_name); /* The VFS may want to delete this inode */ @@ -1547,6 +1549,7 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, nfs_wb_all(old_inode); shrink_dcache_parent(old_dentry); } + nfs_inode_return_delegation(old_inode); if (new_inode) d_delete(new_dentry); diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index d7abaa00473a..6b0f7fe6bd1d 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1671,8 +1671,7 @@ static void nfs4_clear_inode(struct inode *inode) struct nfs_inode *nfsi = NFS_I(inode); /* If we are holding a delegation, return it! */ - if (nfsi->delegation != NULL) - nfs_inode_return_delegation(inode); + nfs_inode_return_delegation(inode); /* First call standard NFS clear_inode() code */ nfs_clear_inode(inode); /* Now clear out any remaining state */ -- GitLab From 642ac54923e0291ae2c8e42edde18d8c9c0a3c84 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:19 -0700 Subject: [PATCH 0270/1519] NFSv4: Return delegations in case we're changing ACLs Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 5 +++++ fs/nfs/nfs4proc.c | 1 + 2 files changed, 6 insertions(+) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 6b0f7fe6bd1d..65d5ab45ddc5 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -853,6 +853,11 @@ nfs_setattr(struct dentry *dentry, struct iattr *attr) filemap_fdatawait(inode->i_mapping); nfs_wb_all(inode); } + /* + * Return any delegations if we're going to change ACLs + */ + if ((attr->ia_valid & (ATTR_MODE|ATTR_UID|ATTR_GID)) != 0) + nfs_inode_return_delegation(inode); error = NFS_PROTO(inode)->setattr(dentry, &fattr, attr); if (error == 0) nfs_refresh_inode(inode, &fattr); diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 3db1c9f0b09c..c10dcd12af51 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2405,6 +2405,7 @@ static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen if (!nfs4_server_supports_acls(server)) return -EOPNOTSUPP; + nfs_inode_return_delegation(inode); buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase); ret = rpc_call_sync(NFS_SERVER(inode)->client, &msg, 0); if (ret == 0) -- GitLab From b8e5c4c2978fa666287525a9de2fa648a7581262 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:20 -0700 Subject: [PATCH 0271/1519] NFSv4: If a delegated open fails, ensure that we return the delegation Unless of course the open fails due to permission issues. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index c10dcd12af51..a8be9af610ac 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -658,6 +658,8 @@ static int _nfs4_open_delegated(struct inode *inode, int flags, struct rpc_cred } up_read(&nfsi->rwsem); up_read(&clp->cl_sem); + if (err != -EACCES) + nfs_inode_return_delegation(inode); return err; } -- GitLab From 550f57470c6506f5ef3c708335dea6bd48bf3dc4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:21 -0700 Subject: [PATCH 0272/1519] NFSv4: Ensure that we recover from the OPEN + OPEN_CONFIRM BAD_STATEID race If the server is in the unconfirmed OPEN state for a given open owner and receives a second OPEN for the same open owner, it will cancel the state of the first request and set up an OPEN_CONFIRM for the second. This can cause a race that is discussed in rfc3530 on page 181. The following patch allows the client to recover by retrying the original open request. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index a8be9af610ac..ff378126ccd7 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -785,6 +785,16 @@ static struct nfs4_state *nfs4_do_open(struct inode *dir, struct dentry *dentry, exception.retry = 1; continue; } + /* + * BAD_STATEID on OPEN means that the server cancelled our + * state before it received the OPEN_CONFIRM. + * Recover by retrying the request as per the discussion + * on Page 181 of RFC3530. + */ + if (status == -NFS4ERR_BAD_STATEID) { + exception.retry = 1; + continue; + } res = ERR_PTR(nfs4_handle_exception(NFS_SERVER(dir), status, &exception)); } while (exception.retry); -- GitLab From 4c780a4688b421baa896b59778c05d7e068e479f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:21 -0700 Subject: [PATCH 0273/1519] Fix Connectathon locking test failure We currently fail Connectathon test 6.10 in the case of 32-bit locks due to incorrect error checking. Also add support for l->l_len < 0 to 64-bit locks. Signed-off-by: Trond Myklebust --- fs/locks.c | 42 +++++++++++++++++++++++++----------------- 1 file changed, 25 insertions(+), 17 deletions(-) diff --git a/fs/locks.c b/fs/locks.c index 7eb1d77b9204..a1e8b2248014 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -316,21 +316,22 @@ static int flock_to_posix_lock(struct file *filp, struct file_lock *fl, /* POSIX-1996 leaves the case l->l_len < 0 undefined; POSIX-2001 defines it. */ start += l->l_start; - end = start + l->l_len - 1; - if (l->l_len < 0) { + if (start < 0) + return -EINVAL; + fl->fl_end = OFFSET_MAX; + if (l->l_len > 0) { + end = start + l->l_len - 1; + fl->fl_end = end; + } else if (l->l_len < 0) { end = start - 1; + fl->fl_end = end; start += l->l_len; + if (start < 0) + return -EINVAL; } - - if (start < 0) - return -EINVAL; - if (l->l_len > 0 && end < 0) - return -EOVERFLOW; - fl->fl_start = start; /* we record the absolute position */ - fl->fl_end = end; - if (l->l_len == 0) - fl->fl_end = OFFSET_MAX; + if (fl->fl_end < fl->fl_start) + return -EOVERFLOW; fl->fl_owner = current->files; fl->fl_pid = current->tgid; @@ -362,14 +363,21 @@ static int flock64_to_posix_lock(struct file *filp, struct file_lock *fl, return -EINVAL; } - if (((start += l->l_start) < 0) || (l->l_len < 0)) + start += l->l_start; + if (start < 0) return -EINVAL; - fl->fl_end = start + l->l_len - 1; - if (l->l_len > 0 && fl->fl_end < 0) - return -EOVERFLOW; + fl->fl_end = OFFSET_MAX; + if (l->l_len > 0) { + fl->fl_end = start + l->l_len - 1; + } else if (l->l_len < 0) { + fl->fl_end = start - 1; + start += l->l_len; + if (start < 0) + return -EINVAL; + } fl->fl_start = start; /* we record the absolute position */ - if (l->l_len == 0) - fl->fl_end = OFFSET_MAX; + if (fl->fl_end < fl->fl_start) + return -EOVERFLOW; fl->fl_owner = current->files; fl->fl_pid = current->tgid; -- GitLab From 6fe43f9e3701f7a9f2be151a5e6cfe94b87e92f9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 14:20:22 -0700 Subject: [PATCH 0274/1519] NFS: Fix rename of directory onto empty directory If someone tries to rename a directory onto an empty directory, we currently fail and return EBUSY. This patch ensures that we try the rename if both source and target are directories, and that we fail with a correct error of EISDIR if the source is not a directory. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 72f50c0117b1..eb50c19fc253 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1511,9 +1511,11 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, */ if (!new_inode) goto go_ahead; - if (S_ISDIR(new_inode->i_mode)) - goto out; - else if (atomic_read(&new_dentry->d_count) > 2) { + if (S_ISDIR(new_inode->i_mode)) { + error = -EISDIR; + if (!S_ISDIR(old_inode->i_mode)) + goto out; + } else if (atomic_read(&new_dentry->d_count) > 2) { int err; /* copy the target dentry's name */ dentry = d_alloc(new_dentry->d_parent, -- GitLab From 757d18faee58aa4c43bcaf9a44decf17fa68adeb Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Mon, 10 Oct 2005 19:16:53 +0200 Subject: [PATCH 0275/1519] [PATCH] ieee80211: division by zero fix This fixes division by zero bug in ieee80211_wx_get_scan(). Signed-off-by: Jiri Benc Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_wx.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index ee7a70a13250..1ce7af9bec35 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -152,15 +152,18 @@ static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee, iwe.u.qual.level = 0; } else { iwe.u.qual.level = network->stats.rssi; - iwe.u.qual.qual = - (100 * - (ieee->perfect_rssi - ieee->worst_rssi) * - (ieee->perfect_rssi - ieee->worst_rssi) - - (ieee->perfect_rssi - network->stats.rssi) * - (15 * (ieee->perfect_rssi - ieee->worst_rssi) + - 62 * (ieee->perfect_rssi - network->stats.rssi))) / - ((ieee->perfect_rssi - ieee->worst_rssi) * - (ieee->perfect_rssi - ieee->worst_rssi)); + if (ieee->perfect_rssi == ieee->worst_rssi) + iwe.u.qual.qual = 100; + else + iwe.u.qual.qual = + (100 * + (ieee->perfect_rssi - ieee->worst_rssi) * + (ieee->perfect_rssi - ieee->worst_rssi) - + (ieee->perfect_rssi - network->stats.rssi) * + (15 * (ieee->perfect_rssi - ieee->worst_rssi) + + 62 * (ieee->perfect_rssi - network->stats.rssi))) / + ((ieee->perfect_rssi - ieee->worst_rssi) * + (ieee->perfect_rssi - ieee->worst_rssi)); if (iwe.u.qual.qual > 100) iwe.u.qual.qual = 100; else if (iwe.u.qual.qual < 1) -- GitLab From 7150bf8a98f14f1ba67e090ef2778004c746f465 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 18 Oct 2005 14:46:38 -0700 Subject: [PATCH 0276/1519] [IB] mthca: Don't enter QP into MCG more than once. Avoid entering a QP as member of a multicast group multiple times. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_mcg.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c index 9a0612a9d304..b47ea7daf088 100644 --- a/drivers/infiniband/hw/mthca/mthca_mcg.c +++ b/drivers/infiniband/hw/mthca/mthca_mcg.c @@ -185,7 +185,12 @@ int mthca_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) } for (i = 0; i < MTHCA_QP_PER_MGM; ++i) - if (!(mgm->qp[i] & cpu_to_be32(1 << 31))) { + if (mgm->qp[i] == cpu_to_be32(ibqp->qp_num | (1 << 31))) { + mthca_dbg(dev, "QP %06x already a member of MGM\n", + ibqp->qp_num); + err = 0; + goto out; + } else if (!(mgm->qp[i] & cpu_to_be32(1 << 31))) { mgm->qp[i] = cpu_to_be32(ibqp->qp_num | (1 << 31)); break; } -- GitLab From f567ef935094003ee70ea3fd10f5695d349c0f48 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:24 +0100 Subject: [PATCH 0277/1519] [PATCH] sb1250-mac: Check the actual setting for reporting hw checksumming. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 7abd55a4fb21..0f828da0339d 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -2419,7 +2419,7 @@ static int sbmac_init(struct net_device *dev, int idx) if (err) goto out_uninit; - if (periph_rev >= 2) { + if (sc->rx_hw_checksum == ENABLE) { printk(KERN_INFO "%s: enabling TCP rcv checksum\n", sc->sbm_dev->name); } -- GitLab From 04115def6ad7ef51440365b65a7324fcb82d5d1d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:36 +0100 Subject: [PATCH 0278/1519] [PATCH] sb1250-mac: Ensure 16-byte alignment of the descriptor ring. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 9 ++++++++- 1 files changed, 8 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 0f828da0339d..cb4ea4158457 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -750,7 +750,14 @@ static void sbdma_initctx(sbmacdma_t *d, d->sbdma_maxdescr = maxdescr; d->sbdma_dscrtable = (sbdmadscr_t *) - kmalloc(d->sbdma_maxdescr*sizeof(sbdmadscr_t), GFP_KERNEL); + kmalloc((d->sbdma_maxdescr+1)*sizeof(sbdmadscr_t), GFP_KERNEL); + + /* + * The descriptor table must be aligned to at least 16 bytes or the + * MAC will corrupt it. + */ + d->sbdma_dscrtable = (sbdmadscr_t *) + ALIGN((unsigned long)d->sbdma_dscrtable, sizeof(sbdmadscr_t)); memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t)); -- GitLab From 7f553e3db46b36d2662e1118f8b8fdbf086b76df Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:41 +0100 Subject: [PATCH 0279/1519] [PATCH] au1000_eth: Misc Au1000 net driver fixes. o Add support for DP83847 MII. o remove unused variable. o Add some initialisations so even an unknown MII won't result in a crash. o Correct error message to "no known MIIs found". Signed-off-by: Ralf Baechle drivers/net/au1000_eth.c | 13 +++++-------- 1 files changed, 5 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/au1000_eth.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index c82b9cd1c924..78506911d656 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -151,13 +151,6 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES]; SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ SUPPORTED_Autoneg -static char *phy_link[] = -{ "unknown", - "10Base2", "10BaseT", - "AUI", - "100BaseT", "100BaseTX", "100BaseFX" -}; - int bcm_5201_init(struct net_device *dev, int phy_addr) { s16 data; @@ -785,6 +778,7 @@ static struct mii_chip_info { {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0}, {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0}, {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1}, + {"NS DP83847 PHY", 0x2000, 0x5c30, &bcm_5201_ops ,0}, {"AMD 79C901 HomePNA PHY",0x0000,0x35c8, &am79c901_ops,0}, {"AMD 79C874 10/100 BaseT PHY",0x0022,0x561b, &am79c874_ops,0}, {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0}, @@ -1045,7 +1039,7 @@ static int mii_probe (struct net_device * dev) #endif if (aup->mii->chip_info == NULL) { - printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", + printk(KERN_ERR "%s: Au1x No known MII transceivers found!\n", dev->name); return -1; } @@ -1546,6 +1540,9 @@ au1000_probe(u32 ioaddr, int irq, int port_num) printk(KERN_ERR "%s: out of memory\n", dev->name); goto err_out; } + aup->mii->next = NULL; + aup->mii->chip_info = NULL; + aup->mii->status = 0; aup->mii->mii_control_reg = 0; aup->mii->mii_data_reg = 0; -- GitLab From bc053d45cb0ca5daeaa69ae9ac43cdea42693f60 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:46 +0100 Subject: [PATCH 0280/1519] [PATCH] de2104x: Resurrect Cobalt support for 2.6. Signed-off-by: Ralf Baechle drivers/net/tulip/de2104x.c | 5 +++++ 1 files changed, 5 insertions(+) Signed-off-by: Jeff Garzik --- drivers/net/tulip/de2104x.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index a22d00198e4d..6b8eee8f7bfd 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1787,10 +1787,15 @@ static void __init de21041_get_srom_info (struct de_private *de) /* DEC now has a specification but early board makers just put the address in the first EEPROM locations. */ /* This does memcmp(eedata, eedata+16, 8) */ + +#ifndef CONFIG_MIPS_COBALT + for (i = 0; i < 8; i ++) if (ee_data[i] != ee_data[16+i]) sa_offset = 20; +#endif + /* store MAC address */ for (i = 0; i < 6; i ++) de->dev->dev_addr[i] = ee_data[i + sa_offset]; -- GitLab From 2891439e7378e35534d7eb32f77671dc4d61db4c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:51 +0100 Subject: [PATCH 0281/1519] [PATCH] sgiseeq: Fix resource handling. Signed-off-by: Ralf Baechle drivers/net/sgiseeq.c | 9 ++++----- 1 files changed, 4 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/sgiseeq.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index 9bc3b1c0dd6a..a9d2e4fd0aec 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -493,11 +493,13 @@ static int sgiseeq_close(struct net_device *dev) { struct sgiseeq_private *sp = netdev_priv(dev); struct sgiseeq_regs *sregs = sp->sregs; + unsigned int irq = dev->irq; netif_stop_queue(dev); /* Shutdown the Seeq. */ reset_hpc3_and_seeq(sp->hregs, sregs); + free_irq(irq, dev); return 0; } @@ -734,7 +736,7 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) return 0; err_out_free_page: - free_page((unsigned long) sp); + free_page((unsigned long) sp->srings); err_out_free_dev: kfree(dev); @@ -754,15 +756,12 @@ static void __exit sgiseeq_exit(void) { struct net_device *next, *dev; struct sgiseeq_private *sp; - int irq; for (dev = root_sgiseeq_dev; dev; dev = next) { sp = (struct sgiseeq_private *) netdev_priv(dev); next = sp->next_module; - irq = dev->irq; unregister_netdev(dev); - free_irq(irq, dev); - free_page((unsigned long) sp); + free_page((unsigned long) sp->srings); free_netdev(dev); } } -- GitLab From 302a5c4b3d4d6aff7772a4b3431bb772586e6011 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:50:56 +0100 Subject: [PATCH 0282/1519] [PATCH] sgiseeq: Configure PIO and DMA timing requests. Signed-off-by: Ralf Baechle drivers/net/sgiseeq.c | 28 ++++++++++++++-------------- include/asm-mips/sgi/hpc3.h | 40 ++++++++++++++++++++-------------------- 2 files changed, 34 insertions(+), 34 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/sgiseeq.c | 28 +++++++++++++------------- include/asm-mips/sgi/hpc3.h | 40 ++++++++++++++++++------------------- 2 files changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index a9d2e4fd0aec..a4614df38a90 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -32,8 +32,6 @@ #include "sgiseeq.h" -static char *version = "sgiseeq.c: David S. Miller (dm@engr.sgi.com)\n"; - static char *sgiseeqstr = "SGI Seeq8003"; /* @@ -113,9 +111,9 @@ static struct net_device *root_sgiseeq_dev; static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs) { - hregs->rx_reset = HPC3_ERXRST_CRESET | HPC3_ERXRST_CLRIRQ; + hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ; udelay(20); - hregs->rx_reset = 0; + hregs->reset = 0; } static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs, @@ -252,7 +250,6 @@ void sgiseeq_dump_rings(void) #define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF) #define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2) -#define RDMACFG_INIT (HPC3_ERXDCFG_FRXDC | HPC3_ERXDCFG_FEOP | HPC3_ERXDCFG_FIRQ) static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, struct sgiseeq_regs *sregs) @@ -274,8 +271,6 @@ static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, sregs->tstat = TSTAT_INIT_SEEQ; } - hregs->rx_dconfig |= RDMACFG_INIT; - hregs->rx_ndptr = CPHYSADDR(sp->rx_desc); hregs->tx_ndptr = CPHYSADDR(sp->tx_desc); @@ -446,7 +441,7 @@ static irqreturn_t sgiseeq_interrupt(int irq, void *dev_id, struct pt_regs *regs spin_lock(&sp->tx_lock); /* Ack the IRQ and set software state. */ - hregs->rx_reset = HPC3_ERXRST_CLRIRQ; + hregs->reset = HPC3_ERST_CLRIRQ; /* Always check for received packets. */ sgiseeq_rx(dev, sp, hregs, sregs); @@ -646,7 +641,7 @@ static inline void setup_rx_ring(struct sgiseeq_rx_desc *buf, int nbufs) #define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf)) -static int sgiseeq_init(struct hpc3_regs* regs, int irq) +static int sgiseeq_init(struct hpc3_regs* hpcregs, int irq) { struct sgiseeq_init_block *sr; struct sgiseeq_private *sp; @@ -682,8 +677,8 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) gpriv = sp; gdev = dev; #endif - sp->sregs = (struct sgiseeq_regs *) &hpc3c0->eth_ext[0]; - sp->hregs = &hpc3c0->ethregs; + sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0]; + sp->hregs = &hpcregs->ethregs; sp->name = sgiseeqstr; sp->mode = SEEQ_RCMD_RBCAST; @@ -700,6 +695,11 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) setup_rx_ring(sp->rx_desc, SEEQ_RX_BUFFERS); setup_tx_ring(sp->tx_desc, SEEQ_TX_BUFFERS); + /* Setup PIO and DMA transfer timing */ + sp->hregs->pconfig = 0x161; + sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | + HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; + /* Reset the chip. */ hpc3_eth_reset(sp->hregs); @@ -726,7 +726,7 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) goto err_out_free_page; } - printk(KERN_INFO "%s: SGI Seeq8003 ", dev->name); + printk(KERN_INFO "%s: %s ", dev->name, sgiseeqstr); for (i = 0; i < 6; i++) printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); @@ -746,8 +746,6 @@ static int sgiseeq_init(struct hpc3_regs* regs, int irq) static int __init sgiseeq_probe(void) { - printk(version); - /* On board adapter on 1st HPC is always present */ return sgiseeq_init(hpc3c0, SGI_ENET_IRQ); } @@ -769,4 +767,6 @@ static void __exit sgiseeq_exit(void) module_init(sgiseeq_probe); module_exit(sgiseeq_exit); +MODULE_DESCRIPTION("SGI Seeq 8003 driver"); +MODULE_AUTHOR("Linux/MIPS Mailing List "); MODULE_LICENSE("GPL"); diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h index ac3dfc7af5b0..fcec52bafb25 100644 --- a/include/asm-mips/sgi/hpc3.h +++ b/include/asm-mips/sgi/hpc3.h @@ -128,26 +128,26 @@ struct hpc3_ethregs { volatile u32 rx_gfptr; /* current GIO fifo ptr */ volatile u32 rx_dfptr; /* current device fifo ptr */ u32 _unused1; /* padding */ - volatile u32 rx_reset; /* reset register */ -#define HPC3_ERXRST_CRESET 0x1 /* Reset dma channel and external controller */ -#define HPC3_ERXRST_CLRIRQ 0x2 /* Clear channel interrupt */ -#define HPC3_ERXRST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ - - volatile u32 rx_dconfig; /* DMA configuration register */ -#define HPC3_ERXDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ -#define HPC3_ERXDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ -#define HPC3_ERXDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ -#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ -#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ -#define HPC3_ERXDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ -#define HPC3_ERXDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ -#define HPC3_ERXDCFG_PTO 0x30000 /* Programmed timeout value for above two */ - - volatile u32 rx_pconfig; /* PIO configuration register */ -#define HPC3_ERXPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ -#define HPC3_ERXPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ -#define HPC3_ERXPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ -#define HPC3_ERXPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ + volatile u32 reset; /* reset register */ +#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */ +#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */ +#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ + + volatile u32 dconfig; /* DMA configuration register */ +#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ +#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ +#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ +#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ +#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ +#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ +#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ +#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */ + + volatile u32 pconfig; /* PIO configuration register */ +#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ +#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ +#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ +#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ u32 _unused2[0x1000/4 - 8]; /* padding */ -- GitLab From da848ec37d9cf9edbe269f8be9b3de52f90d70da Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:01 +0100 Subject: [PATCH 0283/1519] [PATCH] declance: Convert to irqreturn_t. Signed-off-by: Ralf Baechle drivers/net/declance.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 521c83137bf6..636763b5102e 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -697,12 +697,13 @@ static void lance_tx(struct net_device *dev) spin_unlock(&lp->lock); } -static void lance_dma_merr_int(const int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t lance_dma_merr_int(const int irq, void *dev_id, + struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; printk("%s: DMA error\n", dev->name); + return IRQ_HANDLED; } static irqreturn_t -- GitLab From 6684b4e28247f31543edf86ba785aa87e8fa3b39 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:06 +0100 Subject: [PATCH 0284/1519] [PATCH] declance: Fix mapping of device. These should really be addresses obtained with ioremap() or some bus-specific backend, but for now... Signed-off-by: Ralf Baechle drivers/net/declance.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 636763b5102e..3af78340d963 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -237,7 +237,7 @@ struct lance_init_block { /* * This works *only* for the ring descriptors */ -#define LANCE_ADDR(x) (PHYSADDR(x) >> 1) +#define LANCE_ADDR(x) (CPHYSADDR(x) >> 1) struct lance_private { struct net_device *next; @@ -1102,7 +1102,7 @@ static int __init dec_lance_init(const int type, const int slot) /* Setup I/O ASIC LANCE DMA. */ lp->dma_irq = dec_interrupt[DEC_IRQ_LANCE_MERR]; ioasic_write(IO_REG_LANCE_DMA_P, - PHYSADDR(dev->mem_start) << 3); + CPHYSADDR(dev->mem_start) << 3); break; -- GitLab From 4569504a36cb6223e2b7ad6530326a1563a8f456 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:11 +0100 Subject: [PATCH 0285/1519] [PATCH] declance: Deal with the bloody KSEG vs CKSEG horror... Signed-off-by: Ralf Baechle drivers/net/declance.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 3af78340d963..b47e3cf16516 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -1069,7 +1069,7 @@ static int __init dec_lance_init(const int type, const int slot) /* * FIXME: ugly hack! */ - dev->mem_start = KSEG1ADDR(0x00020000); + dev->mem_start = CKSEG1ADDR(0x00020000); dev->mem_end = dev->mem_start + 0x00020000; dev->irq = dec_interrupt[DEC_IRQ_LANCE]; esar_base = system_base + IOASIC_ESAR; -- GitLab From 36156cdff17a5ab822898d33cd890a6f8287c43c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:16 +0100 Subject: [PATCH 0286/1519] [PATCH] declance: Use physical addresses at the interface level. Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: Ralf Baechle drivers/net/declance.c | 26 ++++++++++---------------- 1 files changed, 10 insertions(+), 16 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/declance.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/drivers/net/declance.c b/drivers/net/declance.c index b47e3cf16516..f130bdab3fd3 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -5,7 +5,7 @@ * * adopted from sunlance.c by Richard van den Berg * - * Copyright (C) 2002, 2003 Maciej W. Rozycki + * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki * * additional sources: * - PMAD-AA TURBOchannel Ethernet Module Functional Specification, @@ -57,13 +57,15 @@ #include #include +#include + #include #include #include #include #include +#include #include -#include static char version[] __devinitdata = "declance.c: v0.009 by Linux MIPS DECstation task force\n"; @@ -79,10 +81,6 @@ MODULE_LICENSE("GPL"); #define PMAD_LANCE 2 #define PMAX_LANCE 3 -#ifndef CONFIG_TC -unsigned long system_base; -unsigned long dmaptr; -#endif #define LE_CSR0 0 #define LE_CSR1 1 @@ -1027,10 +1025,6 @@ static int __init dec_lance_init(const int type, const int slot) unsigned long esar_base; unsigned char *esar; -#ifndef CONFIG_TC - system_base = KN01_LANCE_BASE; -#endif - if (dec_lance_debug && version_printed++ == 0) printk(version); @@ -1063,7 +1057,7 @@ static int __init dec_lance_init(const int type, const int slot) switch (type) { #ifdef CONFIG_TC case ASIC_LANCE: - dev->base_addr = system_base + IOASIC_LANCE; + dev->base_addr = CKSEG1ADDR(dec_kn_slot_base + IOASIC_LANCE); /* buffer space for the on-board LANCE shared memory */ /* @@ -1072,7 +1066,7 @@ static int __init dec_lance_init(const int type, const int slot) dev->mem_start = CKSEG1ADDR(0x00020000); dev->mem_end = dev->mem_start + 0x00020000; dev->irq = dec_interrupt[DEC_IRQ_LANCE]; - esar_base = system_base + IOASIC_ESAR; + esar_base = CKSEG1ADDR(dec_kn_slot_base + IOASIC_ESAR); /* Workaround crash with booting KN04 2.1k from Disk */ memset((void *)dev->mem_start, 0, @@ -1109,7 +1103,7 @@ static int __init dec_lance_init(const int type, const int slot) case PMAD_LANCE: claim_tc_card(slot); - dev->mem_start = get_tc_base_addr(slot); + dev->mem_start = CKSEG1ADDR(get_tc_base_addr(slot)); dev->base_addr = dev->mem_start + 0x100000; dev->irq = get_tc_irq_nr(slot); esar_base = dev->mem_start + 0x1c0002; @@ -1138,9 +1132,9 @@ static int __init dec_lance_init(const int type, const int slot) case PMAX_LANCE: dev->irq = dec_interrupt[DEC_IRQ_LANCE]; - dev->base_addr = KN01_LANCE_BASE; - dev->mem_start = KN01_LANCE_BASE + 0x01000000; - esar_base = KN01_RTC_BASE + 1; + dev->base_addr = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE); + dev->mem_start = CKSEG1ADDR(KN01_SLOT_BASE + KN01_LANCE_MEM); + esar_base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_ESAR + 1); lp->dma_irq = -1; /* -- GitLab From 9cc975e00ddb291035bc4d2d49cdc8768ddf1cc3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:21 +0100 Subject: [PATCH 0287/1519] [PATCH] ne: Support for RBHMA4500 eval board. Support for Toshiba's RBHMA4500 eval board for the TX4938. Signed-off-by: Ralf Baechle drivers/net/ne.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+) Signed-off-by: Jeff Garzik --- drivers/net/ne.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/net/ne.c b/drivers/net/ne.c index d209a1556b2e..0de8fdd2aa86 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -54,6 +54,10 @@ static const char version2[] = #include #include +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) +#include +#endif + #include "8390.h" #define DRV_NAME "ne" @@ -111,6 +115,9 @@ bad_clone_list[] __initdata = { {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */ {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */ {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */ +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) + {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */ +#endif {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */ {NULL,} }; @@ -226,6 +233,10 @@ struct net_device * __init ne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); +#ifdef CONFIG_TOSHIBA_RBTX4938 + dev->base_addr = 0x07f20280; + dev->irq = RBTX4938_RTL_8019_IRQ; +#endif err = do_ne_probe(dev); if (err) goto out; @@ -506,6 +517,10 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr) ei_status.name = name; ei_status.tx_start_page = start_page; ei_status.stop_page = stop_page; +#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) + wordlength = 1; +#endif + #ifdef CONFIG_PLAT_OAKS32R ei_status.word16 = 0; #else -- GitLab From dcbf8477567c312c9f0512545d07e05175d740a4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 10 Oct 2005 14:51:27 +0100 Subject: [PATCH 0288/1519] [PATCH] mipsnet: Virtual ethernet driver for MIPSsim. Signed-off-by: Ralf Baechle drivers/net/Kconfig | 8 + drivers/net/Makefile | 1 drivers/net/mipsnet.c | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/mipsnet.h | 127 +++++++++++++++++ 4 files changed, 507 insertions(+) Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 8 + drivers/net/Makefile | 1 + drivers/net/mipsnet.c | 371 ++++++++++++++++++++++++++++++++++++++++++ drivers/net/mipsnet.h | 127 +++++++++++++++ 4 files changed, 507 insertions(+) create mode 100644 drivers/net/mipsnet.c create mode 100644 drivers/net/mipsnet.h diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0a30368d2efc..5148d47492a0 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -475,6 +475,14 @@ config SGI_IOC3_ETH_HW_TX_CSUM the moment only acceleration of IPv4 is supported. This option enables offloading for checksums on transmit. If unsure, say Y. +config MIPS_SIM_NET + tristate "MIPS simulator Network device (EXPERIMENTAL)" + depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL + help + The MIPSNET device is a simple Ethernet network device which is + emulated by the MIPS Simulator. + If you are not using a MIPSsim or are unsure, say N. + config SGI_O2MACE_ETH tristate "SGI O2 MACE Fast Ethernet support" depends on NET_ETHERNET && SGI_IP32=y diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 4c9477cb2127..1a84e0435f64 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -167,6 +167,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o obj-$(CONFIG_MIPS_GT96100ETH) += gt96100eth.o obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o +obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o obj-$(CONFIG_DECLANCE) += declance.o obj-$(CONFIG_ATARILANCE) += atarilance.o diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c new file mode 100644 index 000000000000..f79f7ee72ab8 --- /dev/null +++ b/drivers/net/mipsnet.c @@ -0,0 +1,371 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mipsnet.h" /* actual device IO mapping */ + +#define MIPSNET_VERSION "2005-06-20" + +#define mipsnet_reg_address(dev, field) (dev->base_addr + field_offset(field)) + +struct mipsnet_priv { + struct net_device_stats stats; +}; + +static struct platform_device *mips_plat_dev; + +static char mipsnet_string[] = "mipsnet"; + +/* + * Copy data from the MIPSNET rx data port + */ +static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata, + int len) +{ + uint32_t available_len = inl(mipsnet_reg_address(dev, rxDataCount)); + if (available_len < len) + return -EFAULT; + + for (; len > 0; len--, kdata++) { + *kdata = inb(mipsnet_reg_address(dev, rxDataBuffer)); + } + + return inl(mipsnet_reg_address(dev, rxDataCount)); +} + +static inline ssize_t mipsnet_put_todevice(struct net_device *dev, + struct sk_buff *skb) +{ + int count_to_go = skb->len; + char *buf_ptr = skb->data; + struct mipsnet_priv *mp = netdev_priv(dev); + + pr_debug("%s: %s(): telling MIPSNET txDataCount(%d)\n", + dev->name, __FUNCTION__, skb->len); + + outl(skb->len, mipsnet_reg_address(dev, txDataCount)); + + pr_debug("%s: %s(): sending data to MIPSNET txDataBuffer(%d)\n", + dev->name, __FUNCTION__, skb->len); + + for (; count_to_go; buf_ptr++, count_to_go--) { + outb(*buf_ptr, mipsnet_reg_address(dev, txDataBuffer)); + } + + mp->stats.tx_packets++; + mp->stats.tx_bytes += skb->len; + + return skb->len; +} + +static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev) +{ + pr_debug("%s:%s(): transmitting %d bytes\n", + dev->name, __FUNCTION__, skb->len); + + /* Only one packet at a time. Once TXDONE interrupt is serviced, the + * queue will be restarted. + */ + netif_stop_queue(dev); + mipsnet_put_todevice(dev, skb); + + return 0; +} + +static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t count) +{ + struct sk_buff *skb; + size_t len = count; + struct mipsnet_priv *mp = netdev_priv(dev); + + if (!(skb = alloc_skb(len + 2, GFP_KERNEL))) { + mp->stats.rx_dropped++; + return -ENOMEM; + } + + skb_reserve(skb, 2); + if (ioiocpy_frommipsnet(dev, skb_put(skb, len), len)) + return -EFAULT; + + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + pr_debug("%s:%s(): pushing RXed data to kernel\n", + dev->name, __FUNCTION__); + netif_rx(skb); + + mp->stats.rx_packets++; + mp->stats.rx_bytes += len; + + return count; +} + +static irqreturn_t +mipsnet_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + + irqreturn_t retval = IRQ_NONE; + uint64_t interruptFlags; + + if (irq == dev->irq) { + pr_debug("%s:%s(): irq %d for device\n", + dev->name, __FUNCTION__, irq); + + retval = IRQ_HANDLED; + + interruptFlags = + inl(mipsnet_reg_address(dev, interruptControl)); + pr_debug("%s:%s(): intCtl=0x%016llx\n", dev->name, + __FUNCTION__, interruptFlags); + + if (interruptFlags & MIPSNET_INTCTL_TXDONE) { + pr_debug("%s:%s(): got TXDone\n", + dev->name, __FUNCTION__); + outl(MIPSNET_INTCTL_TXDONE, + mipsnet_reg_address(dev, interruptControl)); + // only one packet at a time, we are done. + netif_wake_queue(dev); + } else if (interruptFlags & MIPSNET_INTCTL_RXDONE) { + pr_debug("%s:%s(): got RX data\n", + dev->name, __FUNCTION__); + mipsnet_get_fromdev(dev, + inl(mipsnet_reg_address(dev, rxDataCount))); + pr_debug("%s:%s(): clearing RX int\n", + dev->name, __FUNCTION__); + outl(MIPSNET_INTCTL_RXDONE, + mipsnet_reg_address(dev, interruptControl)); + + } else if (interruptFlags & MIPSNET_INTCTL_TESTBIT) { + pr_debug("%s:%s(): got test interrupt\n", + dev->name, __FUNCTION__); + // TESTBIT is cleared on read. + // And takes effect after a write with 0 + outl(0, mipsnet_reg_address(dev, interruptControl)); + } else { + pr_debug("%s:%s(): no valid fags 0x%016llx\n", + dev->name, __FUNCTION__, interruptFlags); + // Maybe shared IRQ, just ignore, no clearing. + retval = IRQ_NONE; + } + + } else { + printk(KERN_INFO "%s: %s(): irq %d for unknown device\n", + dev->name, __FUNCTION__, irq); + retval = IRQ_NONE; + } + return retval; +} //mipsnet_interrupt() + +static int mipsnet_open(struct net_device *dev) +{ + int err; + pr_debug("%s: mipsnet_open\n", dev->name); + + err = request_irq(dev->irq, &mipsnet_interrupt, + SA_SHIRQ, dev->name, (void *) dev); + + if (err) { + pr_debug("%s: %s(): can't get irq %d\n", + dev->name, __FUNCTION__, dev->irq); + release_region(dev->base_addr, MIPSNET_IO_EXTENT); + return err; + } + + pr_debug("%s: %s(): got IO region at 0x%04lx and irq %d for dev.\n", + dev->name, __FUNCTION__, dev->base_addr, dev->irq); + + + netif_start_queue(dev); + + // test interrupt handler + outl(MIPSNET_INTCTL_TESTBIT, + mipsnet_reg_address(dev, interruptControl)); + + + return 0; +} + +static int mipsnet_close(struct net_device *dev) +{ + pr_debug("%s: %s()\n", dev->name, __FUNCTION__); + netif_stop_queue(dev); + return 0; +} + +static struct net_device_stats *mipsnet_get_stats(struct net_device *dev) +{ + struct mipsnet_priv *mp = netdev_priv(dev); + + return &mp->stats; +} + +static void mipsnet_set_mclist(struct net_device *dev) +{ + // we don't do anything + return; +} + +static int __init mipsnet_probe(struct device *dev) +{ + struct net_device *netdev; + int err; + + netdev = alloc_etherdev(sizeof(struct mipsnet_priv)); + if (!netdev) { + err = -ENOMEM; + goto out; + } + + dev_set_drvdata(dev, netdev); + + netdev->open = mipsnet_open; + netdev->stop = mipsnet_close; + netdev->hard_start_xmit = mipsnet_xmit; + netdev->get_stats = mipsnet_get_stats; + netdev->set_multicast_list = mipsnet_set_mclist; + + /* + * TODO: probe for these or load them from PARAM + */ + netdev->base_addr = 0x4200; + netdev->irq = MIPSCPU_INT_BASE + MIPSCPU_INT_MB0 + + inl(mipsnet_reg_address(netdev, interruptInfo)); + + // Get the io region now, get irq on open() + if (!request_region(netdev->base_addr, MIPSNET_IO_EXTENT, "mipsnet")) { + pr_debug("%s: %s(): IO region {start: 0x%04lux, len: %d} " + "for dev is not availble.\n", netdev->name, + __FUNCTION__, netdev->base_addr, MIPSNET_IO_EXTENT); + err = -EBUSY; + goto out_free_netdev; + } + + /* + * Lacking any better mechanism to allocate a MAC address we use a + * random one ... + */ + random_ether_addr(netdev->dev_addr); + + err = register_netdev(netdev); + if (err) { + printk(KERN_ERR "MIPSNet: failed to register netdev.\n"); + goto out_free_region; + } + + return 0; + +out_free_region: + release_region(netdev->base_addr, MIPSNET_IO_EXTENT); + +out_free_netdev: + free_netdev(netdev); + +out: + return err; +} + +static int __devexit mipsnet_device_remove(struct device *device) +{ + struct net_device *dev = dev_get_drvdata(device); + + unregister_netdev(dev); + release_region(dev->base_addr, MIPSNET_IO_EXTENT); + free_netdev(dev); + dev_set_drvdata(device, NULL); + + return 0; +} + +static struct device_driver mipsnet_driver = { + .name = mipsnet_string, + .bus = &platform_bus_type, + .probe = mipsnet_probe, + .remove = __devexit_p(mipsnet_device_remove), +}; + +static void mipsnet_platform_release(struct device *device) +{ + struct platform_device *pldev; + + /* free device */ + pldev = to_platform_device(device); + kfree(pldev); +} + +static int __init mipsnet_init_module(void) +{ + struct platform_device *pldev; + int err; + + printk(KERN_INFO "MIPSNet Ethernet driver. Version: %s. " + "(c)2005 MIPS Technologies, Inc.\n", MIPSNET_VERSION); + + if (driver_register(&mipsnet_driver)) { + printk(KERN_ERR "Driver registration failed\n"); + err = -ENODEV; + goto out; + } + + if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL))) { + err = -ENOMEM; + goto out_unregister_driver; + } + + memset (pldev, 0, sizeof (*pldev)); + pldev->name = mipsnet_string; + pldev->id = 0; + pldev->dev.release = mipsnet_platform_release; + + if (platform_device_register(pldev)) { + err = -ENODEV; + goto out_free_pldev; + } + + if (!pldev->dev.driver) { + /* + * The driver was not bound to this device, there was + * no hardware at this address. Unregister it, as the + * release fuction will take care of freeing the + * allocated structure + */ + platform_device_unregister (pldev); + } + + mips_plat_dev = pldev; + + return 0; + +out_free_pldev: + kfree(pldev); + +out_unregister_driver: + driver_unregister(&mipsnet_driver); +out: + return err; +} + +static void __exit mipsnet_exit_module(void) +{ + pr_debug("MIPSNet Ethernet driver exiting\n"); + + driver_unregister(&mipsnet_driver); +} + +module_init(mipsnet_init_module); +module_exit(mipsnet_exit_module); diff --git a/drivers/net/mipsnet.h b/drivers/net/mipsnet.h new file mode 100644 index 000000000000..878535953cb1 --- /dev/null +++ b/drivers/net/mipsnet.h @@ -0,0 +1,127 @@ +// +// +// Unpublished work (c) MIPS Technologies, Inc. All rights reserved. +// Unpublished rights reserved under the copyright laws of the U.S.A. and +// other countries. +// +// PROPRIETARY / SECRET CONFIDENTIAL INFORMATION OF MIPS TECHNOLOGIES, INC. +// FOR INTERNAL USE ONLY. +// +// Under no circumstances (contract or otherwise) may this information be +// disclosed to, or copied, modified or used by anyone other than employees +// or contractors of MIPS Technologies having a need to know. +// +// +//++ +// File: MIPS_Net.h +// +// Description: +// The definition of the emulated MIPSNET device's interface. +// +// Notes: This include file needs to work from a Linux device drivers. +// +//-- +// + +#ifndef __MIPSNET_H +#define __MIPSNET_H + +/* + * Id of this Net device, as seen by the core. + */ +#define MIPS_NET_DEV_ID ((uint64_t) \ + ((uint64_t)'M'<< 0)| \ + ((uint64_t)'I'<< 8)| \ + ((uint64_t)'P'<<16)| \ + ((uint64_t)'S'<<24)| \ + ((uint64_t)'N'<<32)| \ + ((uint64_t)'E'<<40)| \ + ((uint64_t)'T'<<48)| \ + ((uint64_t)'0'<<56)) + +/* + * Net status/control block as seen by sw in the core. + * (Why not use bit fields? can't be bothered with cross-platform struct + * packing.) + */ +typedef struct _net_control_block { + /// dev info for probing + /// reads as MIPSNET%d where %d is some form of version + uint64_t devId; /*0x00 */ + + /* + * read only busy flag. + * Set and cleared by the Net Device to indicate that an rx or a tx + * is in progress. + */ + uint32_t busy; /*0x08 */ + + /* + * Set by the Net Device. + * The device will set it once data has been received. + * The value is the number of bytes that should be read from + * rxDataBuffer. The value will decrease till 0 until all the data + * from rxDataBuffer has been read. + */ + uint32_t rxDataCount; /*0x0c */ +#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16) + + /* + * Settable from the MIPS core, cleared by the Net Device. + * The core should set the number of bytes it wants to send, + * then it should write those bytes of data to txDataBuffer. + * The device will clear txDataCount has been processed (not necessarily sent). + */ + uint32_t txDataCount; /*0x10 */ + + /* + * Interrupt control + * + * Used to clear the interrupted generated by this dev. + * Write a 1 to clear the interrupt. (except bit31). + * + * Bit0 is set if it was a tx-done interrupt. + * Bit1 is set when new rx-data is available. + * Until this bit is cleared there will be no other RXs. + * + * Bit31 is used for testing, it clears after a read. + * Writing 1 to this bit will cause an interrupt to be generated. + * To clear the test interrupt, write 0 to this register. + */ + uint32_t interruptControl; /*0x14 */ +#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0)) +#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1)) +#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31)) +#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT) + + /* + * Readonly core-specific interrupt info for the device to signal the core. + * The meaning of the contents of this field might change. + */ + /*###\todo: the whole memIntf interrupt scheme is messy: the device should have + * no control what so ever of what VPE/register set is being used. + * The MemIntf should only expose interrupt lines, and something in the + * config should be responsible for the line<->core/vpe bindings. + */ + uint32_t interruptInfo; /*0x18 */ + + /* + * This is where the received data is read out. + * There is more data to read until rxDataReady is 0. + * Only 1 byte at this regs offset is used. + */ + uint32_t rxDataBuffer; /*0x1c */ + + /* + * This is where the data to transmit is written. + * Data should be written for the amount specified in the txDataCount register. + * Only 1 byte at this regs offset is used. + */ + uint32_t txDataBuffer; /*0x20 */ +} MIPS_T_NetControl; + +#define MIPSNET_IO_EXTENT 0x40 /* being generous */ + +#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field) + +#endif /* __MIPSNET_H */ -- GitLab From 166d823d397b9f5404648cedfdefe13e10683694 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 16 Oct 2005 13:32:14 -0700 Subject: [PATCH 0289/1519] [PATCH] e1000_intr build fix drivers/net/e1000/e1000_main.c: In function `e1000_intr': drivers/net/e1000/e1000_main.c:3156: error: `i' undeclared (first use in this function) drivers/net/e1000/e1000_main.c:3156: error: (Each undeclared identifier is reported only once drivers/net/e1000/e1000_main.c:3156: error: for each function it appears in.) This function is foul. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index dd79449f9a99..18847f9e4d49 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3100,7 +3100,7 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; uint32_t icr = E1000_READ_REG(hw, ICR); -#ifdef CONFIG_E1000_MQ +#if defined(CONFIG_E1000_NAPI) && defined(CONFIG_E1000_MQ) || !defined(CONFIG_E1000_NAPI) int i; #endif -- GitLab From 923833405d8d81b5be036093773d88d87fc7e1bd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 16 Oct 2005 00:11:29 -0700 Subject: [PATCH 0290/1519] [PATCH] s2io build fix Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 30fbaf04773f..d303d162974f 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2997,7 +2997,7 @@ int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_RXF_W_FE | SWAPPER_CTRL_XMSI_FE | SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); - if (nic->intr_type == INTA) + if (sp->intr_type == INTA) val64 |= SWAPPER_CTRL_XMSI_SE; writeq(val64, &bar0->swapper_ctrl); #else -- GitLab From 6ba98d311d0a4ff7dc36d8f435ce60174f4c30ec Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:02 -0400 Subject: [PATCH 0291/1519] [PATCH] via-rhine: change mdelay to msleep and remove from ISR path Get rid of the mdelay call in rhine_disable_linkmon. The function is called from the via-rhine versions of mdio_read and mdio_write. Those functions are indirectly called from rhine_check_media and rhine_tx_timeout, both of which can be called in interrupt context. So, create tx_timeout_task and check_media_task as instances of struct work_struct inside of rhine_private. Then, change rhine_tx_timeout to invoke schedule_work for tx_timeout_task (i.e. rhine_tx_timeout_task), moving the work to process context. Also, change rhine_error (invoked from rhine_interrupt) to invoke schedule_work for check_media_task (i.e. rhine_check_media_task), which simply calls rhine_check media in process context. Finally, add a call to flush_scheduled_work in rhine_close to avoid any resource conflicts with pending work items. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index e7b4bc3820e3..241871589283 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -490,6 +490,8 @@ struct rhine_private { u8 tx_thresh, rx_thresh; struct mii_if_info mii_if; + struct work_struct tx_timeout_task; + struct work_struct check_media_task; void __iomem *base; }; @@ -497,6 +499,8 @@ static int mdio_read(struct net_device *dev, int phy_id, int location); static void mdio_write(struct net_device *dev, int phy_id, int location, int value); static int rhine_open(struct net_device *dev); static void rhine_tx_timeout(struct net_device *dev); +static void rhine_tx_timeout_task(struct net_device *dev); +static void rhine_check_media_task(struct net_device *dev); static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev); static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static void rhine_tx(struct net_device *dev); @@ -851,6 +855,12 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, if (rp->quirks & rqRhineI) dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; + INIT_WORK(&rp->tx_timeout_task, + (void (*)(void *))rhine_tx_timeout_task, dev); + + INIT_WORK(&rp->check_media_task, + (void (*)(void *))rhine_check_media_task, dev); + /* dev->name not defined before register_netdev()! */ rc = register_netdev(dev); if (rc) @@ -1077,6 +1087,11 @@ static void rhine_check_media(struct net_device *dev, unsigned int init_media) ioaddr + ChipCmd1); } +static void rhine_check_media_task(struct net_device *dev) +{ + rhine_check_media(dev, 0); +} + static void init_registers(struct net_device *dev) { struct rhine_private *rp = netdev_priv(dev); @@ -1130,8 +1145,8 @@ static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks) if (quirks & rqRhineI) { iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR - /* Can be called from ISR. Evil. */ - mdelay(1); + /* Do not call from ISR! */ + msleep(1); /* 0x80 must be set immediately before turning it off */ iowrite8(0x80, ioaddr + MIICmd); @@ -1219,6 +1234,16 @@ static int rhine_open(struct net_device *dev) } static void rhine_tx_timeout(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + + /* + * Move bulk of work outside of interrupt context + */ + schedule_work(&rp->tx_timeout_task); +} + +static void rhine_tx_timeout_task(struct net_device *dev) { struct rhine_private *rp = netdev_priv(dev); void __iomem *ioaddr = rp->base; @@ -1626,7 +1651,7 @@ static void rhine_error(struct net_device *dev, int intr_status) spin_lock(&rp->lock); if (intr_status & IntrLinkChange) - rhine_check_media(dev, 0); + schedule_work(&rp->check_media_task); if (intr_status & IntrStatsMax) { rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); @@ -1874,6 +1899,9 @@ static int rhine_close(struct net_device *dev) spin_unlock_irq(&rp->lock); free_irq(rp->pdev->irq, dev); + + flush_scheduled_work(); + free_rbufs(dev); free_tbufs(dev); free_ring(dev); -- GitLab From b7b1d2021452d0a3562807b6a90dfa5124147a79 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:01 -0400 Subject: [PATCH 0292/1519] [PATCH] epic100: fix counting of work_done in epic_poll work_done is overwritten each time through the rx_action loop in epic_poll. This screws-up the NAPI accounting if the loop is executed more than once. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/epic100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 87f522738bfc..f119ec4e89ea 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -1334,7 +1334,7 @@ static void epic_rx_err(struct net_device *dev, struct epic_private *ep) static int epic_poll(struct net_device *dev, int *budget) { struct epic_private *ep = dev->priv; - int work_done, orig_budget; + int work_done = 0, orig_budget; long ioaddr = dev->base_addr; orig_budget = (*budget > dev->quota) ? dev->quota : *budget; @@ -1343,7 +1343,7 @@ static int epic_poll(struct net_device *dev, int *budget) epic_tx(dev, ep); - work_done = epic_rx(dev, *budget); + work_done += epic_rx(dev, *budget); epic_rx_err(dev, ep); -- GitLab From 4cac018ae30dac8f7fc089a8ff4963904c99725e Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:30:59 -0400 Subject: [PATCH 0293/1519] [PATCH] bonding: fix typos in bonding documentation Fix some simple typos in the bonding.txt file. The typos are in areas relating to loading the bonding driver multiple times. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- Documentation/networking/bonding.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index a55f0f95b171..b0fe41da007b 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -777,7 +777,7 @@ doing so is the same as described in the "Configuring Multiple Bonds Manually" section, below. NOTE: It has been observed that some Red Hat supplied kernels -are apparently unable to rename modules at load time (the "-obonding1" +are apparently unable to rename modules at load time (the "-o bond1" part). Attempts to pass that option to modprobe will produce an "Operation not permitted" error. This has been reported on some Fedora Core kernels, and has been seen on RHEL 4 as well. On kernels @@ -883,7 +883,8 @@ the above does not work, and the second bonding instance never sees its options. In that case, the second options line can be substituted as follows: -install bonding1 /sbin/modprobe bonding -obond1 mode=balance-alb miimon=50 +install bond1 /sbin/modprobe --ignore-install bonding -o bond1 \ + mode=balance-alb miimon=50 This may be repeated any number of times, specifying a new and unique name in place of bond1 for each subsequent instance. -- GitLab From 7645baec58b9661366e2038c4ea02bd06aaf1fbc Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:00 -0400 Subject: [PATCH 0294/1519] [PATCH] 8139too: fix resume for Realtek 8100B/8139D Add "HasHltClk" flag for RTL-8100B/8139D hardware in order to fix problems resuming from suspend-to-RAM. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/8139too.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 76ef6efd5950..30bee11c48bd 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -552,7 +552,8 @@ const static struct { { "RTL-8100B/8139D", HW_REVID(1, 1, 1, 0, 1, 0, 1), - HasLWake, + HasHltClk /* XXX undocumented? */ + | HasLWake, }, { "RTL-8101", -- GitLab From df49898a47061e82219c991dfbe9ac6ddf7a866b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:30:58 -0400 Subject: [PATCH 0295/1519] [PATCH] bonding: cleanup comment for mode 1 IGMP xmit hack Expand comment explaining MAC address selection for replicated IGMP frames transmitted in bonding mode 1 (active-backup). Also, a small whitespace cleanup. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_main.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 58c4e36f87d7..8032126fd589 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4242,8 +4242,8 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev } static void bond_activebackup_xmit_copy(struct sk_buff *skb, - struct bonding *bond, - struct slave *slave) + struct bonding *bond, + struct slave *slave) { struct sk_buff *skb2 = skb_copy(skb, GFP_ATOMIC); struct ethhdr *eth_data; @@ -4259,7 +4259,11 @@ static void bond_activebackup_xmit_copy(struct sk_buff *skb, skb2->mac.raw = (unsigned char *)skb2->data; eth_data = eth_hdr(skb2); - /* Pick an appropriate source MAC address */ + /* Pick an appropriate source MAC address + * -- use slave's perm MAC addr, unless used by bond + * -- otherwise, borrow active slave's perm MAC addr + * since that will not be used + */ hwaddr = slave->perm_hwaddr; if (!memcmp(eth_data->h_source, hwaddr, ETH_ALEN)) hwaddr = bond->curr_active_slave->perm_hwaddr; -- GitLab From 9f38c636ababfb41e58c9ec1e9719492ef7f0479 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:30:59 -0400 Subject: [PATCH 0296/1519] [PATCH] b44: alternate allocation option for DMA descriptors This is a (final?) hack to support the odd DMA allocation requirements of the b44 hardware. The b44 hardware has a 30-bit DMA mask. On x86, anything less than a 32-bit DMA mask forces allocations into the 16MB GFP_DMA range. The memory there is somewhat limited, often resulting in an inability to initialize the b44 driver. This hack uses streaming DMA allocation APIs in order to provide an alternative in case the GFP_DMA allocation fails. It is somewhat ugly, but not much worse than the similar existing hacks to support SKB allocations in the same driver. FWIW, I have received positive feedback on this from several Fedora users. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/b44.c | 134 +++++++++++++++++++++++++++++++++++++++++++--- drivers/net/b44.h | 2 + 2 files changed, 128 insertions(+), 8 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index d27e870e59ab..282ebd15f011 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -106,6 +106,29 @@ static int b44_poll(struct net_device *dev, int *budget); static void b44_poll_controller(struct net_device *dev); #endif +static int dma_desc_align_mask; +static int dma_desc_sync_size; + +static inline void b44_sync_dma_desc_for_device(struct pci_dev *pdev, + dma_addr_t dma_base, + unsigned long offset, + enum dma_data_direction dir) +{ + dma_sync_single_range_for_device(&pdev->dev, dma_base, + offset & dma_desc_align_mask, + dma_desc_sync_size, dir); +} + +static inline void b44_sync_dma_desc_for_cpu(struct pci_dev *pdev, + dma_addr_t dma_base, + unsigned long offset, + enum dma_data_direction dir) +{ + dma_sync_single_range_for_cpu(&pdev->dev, dma_base, + offset & dma_desc_align_mask, + dma_desc_sync_size, dir); +} + static inline unsigned long br32(const struct b44 *bp, unsigned long reg) { return readl(bp->regs + reg); @@ -668,6 +691,11 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dp->ctrl = cpu_to_le32(ctrl); dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset); + if (bp->flags & B44_FLAG_RX_RING_HACK) + b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma, + dest_idx * sizeof(dp), + DMA_BIDIRECTIONAL); + return RX_PKT_BUF_SZ; } @@ -692,6 +720,11 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) pci_unmap_addr_set(dest_map, mapping, pci_unmap_addr(src_map, mapping)); + if (bp->flags & B44_FLAG_RX_RING_HACK) + b44_sync_dma_desc_for_cpu(bp->pdev, bp->rx_ring_dma, + src_idx * sizeof(src_desc), + DMA_BIDIRECTIONAL); + ctrl = src_desc->ctrl; if (dest_idx == (B44_RX_RING_SIZE - 1)) ctrl |= cpu_to_le32(DESC_CTRL_EOT); @@ -700,8 +733,14 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dest_desc->ctrl = ctrl; dest_desc->addr = src_desc->addr; + src_map->skb = NULL; + if (bp->flags & B44_FLAG_RX_RING_HACK) + b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma, + dest_idx * sizeof(dest_desc), + DMA_BIDIRECTIONAL); + pci_dma_sync_single_for_device(bp->pdev, src_desc->addr, RX_PKT_BUF_SZ, PCI_DMA_FROMDEVICE); @@ -959,6 +998,11 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl); bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset); + if (bp->flags & B44_FLAG_TX_RING_HACK) + b44_sync_dma_desc_for_device(bp->pdev, bp->tx_ring_dma, + entry * sizeof(bp->tx_ring[0]), + DMA_TO_DEVICE); + entry = NEXT_TX(entry); bp->tx_prod = entry; @@ -1064,6 +1108,16 @@ static void b44_init_rings(struct b44 *bp) memset(bp->rx_ring, 0, B44_RX_RING_BYTES); memset(bp->tx_ring, 0, B44_TX_RING_BYTES); + if (bp->flags & B44_FLAG_RX_RING_HACK) + dma_sync_single_for_device(&bp->pdev->dev, bp->rx_ring_dma, + DMA_TABLE_BYTES, + PCI_DMA_BIDIRECTIONAL); + + if (bp->flags & B44_FLAG_TX_RING_HACK) + dma_sync_single_for_device(&bp->pdev->dev, bp->tx_ring_dma, + DMA_TABLE_BYTES, + PCI_DMA_TODEVICE); + for (i = 0; i < bp->rx_pending; i++) { if (b44_alloc_rx_skb(bp, -1, i) < 0) break; @@ -1085,14 +1139,28 @@ static void b44_free_consistent(struct b44 *bp) bp->tx_buffers = NULL; } if (bp->rx_ring) { - pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, - bp->rx_ring, bp->rx_ring_dma); + if (bp->flags & B44_FLAG_RX_RING_HACK) { + dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); + kfree(bp->rx_ring); + } else + pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, + bp->rx_ring, bp->rx_ring_dma); bp->rx_ring = NULL; + bp->flags &= ~B44_FLAG_RX_RING_HACK; } if (bp->tx_ring) { - pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, - bp->tx_ring, bp->tx_ring_dma); + if (bp->flags & B44_FLAG_TX_RING_HACK) { + dma_unmap_single(&bp->pdev->dev, bp->tx_ring_dma, + DMA_TABLE_BYTES, + DMA_TO_DEVICE); + kfree(bp->tx_ring); + } else + pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, + bp->tx_ring, bp->tx_ring_dma); bp->tx_ring = NULL; + bp->flags &= ~B44_FLAG_TX_RING_HACK; } } @@ -1118,12 +1186,56 @@ static int b44_alloc_consistent(struct b44 *bp) size = DMA_TABLE_BYTES; bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma); - if (!bp->rx_ring) - goto out_err; + if (!bp->rx_ring) { + /* Allocation may have failed due to pci_alloc_consistent + insisting on use of GFP_DMA, which is more restrictive + than necessary... */ + struct dma_desc *rx_ring; + dma_addr_t rx_ring_dma; + + if (!(rx_ring = (struct dma_desc *)kmalloc(size, GFP_KERNEL))) + goto out_err; + + memset(rx_ring, 0, size); + rx_ring_dma = dma_map_single(&bp->pdev->dev, rx_ring, + DMA_TABLE_BYTES, + DMA_BIDIRECTIONAL); + + if (rx_ring_dma + size > B44_DMA_MASK) { + kfree(rx_ring); + goto out_err; + } + + bp->rx_ring = rx_ring; + bp->rx_ring_dma = rx_ring_dma; + bp->flags |= B44_FLAG_RX_RING_HACK; + } bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma); - if (!bp->tx_ring) - goto out_err; + if (!bp->tx_ring) { + /* Allocation may have failed due to pci_alloc_consistent + insisting on use of GFP_DMA, which is more restrictive + than necessary... */ + struct dma_desc *tx_ring; + dma_addr_t tx_ring_dma; + + if (!(tx_ring = (struct dma_desc *)kmalloc(size, GFP_KERNEL))) + goto out_err; + + memset(tx_ring, 0, size); + tx_ring_dma = dma_map_single(&bp->pdev->dev, tx_ring, + DMA_TABLE_BYTES, + DMA_TO_DEVICE); + + if (tx_ring_dma + size > B44_DMA_MASK) { + kfree(tx_ring); + goto out_err; + } + + bp->tx_ring = tx_ring; + bp->tx_ring_dma = tx_ring_dma; + bp->flags |= B44_FLAG_TX_RING_HACK; + } return 0; @@ -1973,6 +2085,12 @@ static struct pci_driver b44_driver = { static int __init b44_init(void) { + unsigned int dma_desc_align_size = dma_get_cache_alignment(); + + /* Setup paramaters for syncing RX/TX DMA descriptors */ + dma_desc_align_mask = ~(dma_desc_align_size - 1); + dma_desc_sync_size = max(dma_desc_align_size, sizeof(struct dma_desc)); + return pci_module_init(&b44_driver); } diff --git a/drivers/net/b44.h b/drivers/net/b44.h index 11c40a2e71c7..593cb0ad4100 100644 --- a/drivers/net/b44.h +++ b/drivers/net/b44.h @@ -400,6 +400,8 @@ struct b44 { #define B44_FLAG_ADV_100HALF 0x04000000 #define B44_FLAG_ADV_100FULL 0x08000000 #define B44_FLAG_INTERNAL_PHY 0x10000000 +#define B44_FLAG_RX_RING_HACK 0x20000000 +#define B44_FLAG_TX_RING_HACK 0x40000000 u32 rx_offset; -- GitLab From 36841c9d02870983c2b08c85d56572c1ff011997 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:30:58 -0400 Subject: [PATCH 0297/1519] [PATCH] orinoco: remove redundance skb length check before padding Checking the skb->len value before calling skb_padto is redundant. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index da4c5e94a959..5db2bbad65c4 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -492,11 +492,9 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) /* Check packet length, pad short packets, round up odd length */ len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN); - if (skb->len < len) { - skb = skb_padto(skb, len); - if (skb == NULL) - goto fail; - } + skb = skb_padto(skb, len); + if (skb == NULL) + goto fail; len -= ETH_HLEN; eh = (struct ethhdr *)skb->data; -- GitLab From 67ec2f805a5260c041b1c3c7a86ecfbc9670db06 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:01 -0400 Subject: [PATCH 0298/1519] [PATCH] sundance: remove if (1) { ... } block in sundance_probe1 Remove an if (1) { ... } block in sundance_probe1. Its purpose seems to be only to allow for delaring some extra local variables. But, it also adds ugly indentation without adding any meaning to the code. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 44 ++++++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 23 deletions(-) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index e148a7212073..8c4eb11ab44e 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -518,6 +518,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, #else int bar = 1; #endif + int phy, phy_idx = 0; /* when built into the kernel, we only print version if device is found */ @@ -606,33 +607,30 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, printk("%2.2x:", dev->dev_addr[i]); printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq); - if (1) { - int phy, phy_idx = 0; - np->phys[0] = 1; /* Default setting */ - np->mii_preamble_required++; - for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { - int mii_status = mdio_read(dev, phy, MII_BMSR); - if (mii_status != 0xffff && mii_status != 0x0000) { - np->phys[phy_idx++] = phy; - np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); - if ((mii_status & 0x0040) == 0) - np->mii_preamble_required++; - printk(KERN_INFO "%s: MII PHY found at address %d, status " - "0x%4.4x advertising %4.4x.\n", - dev->name, phy, mii_status, np->mii_if.advertising); - } - } - np->mii_preamble_required--; - - if (phy_idx == 0) { - printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", - dev->name, ioread32(ioaddr + ASICCtrl)); - goto err_out_unregister; + np->phys[0] = 1; /* Default setting */ + np->mii_preamble_required++; + for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { + int mii_status = mdio_read(dev, phy, MII_BMSR); + if (mii_status != 0xffff && mii_status != 0x0000) { + np->phys[phy_idx++] = phy; + np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); + if ((mii_status & 0x0040) == 0) + np->mii_preamble_required++; + printk(KERN_INFO "%s: MII PHY found at address %d, status " + "0x%4.4x advertising %4.4x.\n", + dev->name, phy, mii_status, np->mii_if.advertising); } + } + np->mii_preamble_required--; - np->mii_if.phy_id = np->phys[0]; + if (phy_idx == 0) { + printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", + dev->name, ioread32(ioaddr + ASICCtrl)); + goto err_out_unregister; } + np->mii_if.phy_id = np->phys[0]; + /* Parse override configuration */ np->an_enable = 1; if (card_idx < MAX_UNITS) { -- GitLab From 2aa1d82db7a967b748c4b41854c4222cd0484114 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 18 Oct 2005 21:31:02 -0400 Subject: [PATCH 0299/1519] [PATCH] sundance: expand reset mask Expand the mask used when reseting the chip to include the GlobalReset bit. This fix comes from ICPlus and seems to be required for some cards. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 8c4eb11ab44e..d8a7e08cab2b 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -691,7 +691,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, /* Reset the chip to erase previous misconfiguration. */ if (netif_msg_hw(np)) printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl)); - iowrite16(0x007f, ioaddr + ASICCtrl + 2); + iowrite16(0x00ff, ioaddr + ASICCtrl + 2); if (netif_msg_hw(np)) printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl)); -- GitLab From c4cfe567b92d5663f98e2f82f28ffc3069fc982f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 15 Oct 2005 00:32:29 -0700 Subject: [PATCH 0300/1519] [PATCH] e1000 build fix Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 18847f9e4d49..40128b9d16ef 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4347,7 +4347,7 @@ e1000_netpoll(struct net_device *netdev) struct e1000_adapter *adapter = netdev_priv(netdev); disable_irq(adapter->pdev->irq); e1000_intr(adapter->pdev->irq, netdev, NULL); - e1000_clean_tx_irq(adapter); + e1000_clean_tx_irq(adapter, adapter->tx_ring); enable_irq(adapter->pdev->irq); } #endif -- GitLab From 7f709a48fa798cfa0f2f777c8752e12995054f78 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 18 Oct 2005 23:19:39 -0700 Subject: [PATCH 0301/1519] NFSv4: Fix an oopsable condition in nfs_free_seqid Storing a pointer to the struct rpc_task in the nfs_seqid is broken since the nfs_seqid may be freed well after the task has been destroyed. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 1 - fs/nfs/nfs4state.c | 9 +-------- 2 files changed, 1 insertion(+), 9 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 8a3788199052..45bff1d1a513 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -112,7 +112,6 @@ struct nfs_seqid_counter { struct nfs_seqid { struct list_head list; struct nfs_seqid_counter *sequence; - struct rpc_task *task; }; static inline void nfs_confirm_seqid(struct nfs_seqid_counter *seqid, int status) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 23834c8fb740..da0861db57fb 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -676,7 +676,6 @@ struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter) new = kmalloc(sizeof(*new), GFP_KERNEL); if (new != NULL) { new->sequence = counter; - new->task = NULL; spin_lock(&sequence->lock); list_add_tail(&new->list, &sequence->list); spin_unlock(&sequence->lock); @@ -687,15 +686,10 @@ struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter) void nfs_free_seqid(struct nfs_seqid *seqid) { struct rpc_sequence *sequence = seqid->sequence->sequence; - struct rpc_task *next = NULL; spin_lock(&sequence->lock); list_del(&seqid->list); - if (!list_empty(&sequence->list)) { - next = list_entry(sequence->list.next, struct nfs_seqid, list)->task; - if (next) - rpc_wake_up_task(next); - } + rpc_wake_up(&sequence->wait); spin_unlock(&sequence->lock); kfree(seqid); } @@ -754,7 +748,6 @@ int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task) spin_lock(&sequence->lock); if (sequence->list.next != &seqid->list) { - seqid->task = task; rpc_sleep_on(&sequence->wait, task, NULL, NULL); status = -EAGAIN; } -- GitLab From 747c5534c9a6da4aa87e7cdc2209ea98ea27f381 Mon Sep 17 00:00:00 2001 From: Steve Dickson Date: Tue, 18 Oct 2005 23:19:40 -0700 Subject: [PATCH 0302/1519] RPC: stops the release_pipe() funtion from being called twice This patch stops the release_pipe() funtion from being called twice by invalidating the ops pointer in the rpc_inode when rpc_pipe_release() is called. Signed-off-by: Steve Dickson Signed-off-by: Trond Myklebust --- net/sunrpc/rpc_pipe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index ded6c63f11ec..649d609e7d94 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -177,6 +177,8 @@ rpc_pipe_release(struct inode *inode, struct file *filp) __rpc_purge_upcall(inode, -EPIPE); if (rpci->ops->release_pipe) rpci->ops->release_pipe(inode); + if (!rpci->nreaders && !rpci->nwriters) + rpci->ops = NULL; out: up(&inode->i_sem); return 0; -- GitLab From 8c233cf9c2ad6f49df753bdce84fddbf00bf6a75 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:54:27 -0400 Subject: [PATCH 0303/1519] NFSv4: handle no acl attr Stop handing garbage to userspace in the case where a weird server clears the acl bit in the getattr return (despite the fact that they've already claimed acl support.) Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- fs/nfs/nfs4xdr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index c5c75235c5b8..cd762648fa9a 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -3255,7 +3255,8 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, if (attrlen <= *acl_len) xdr_read_pages(xdr, attrlen); *acl_len = attrlen; - } + } else + status = -EOPNOTSUPP; out: return status; -- GitLab From 1d95db8e1688ed54e143a597c5570631a42fa594 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:54:32 -0400 Subject: [PATCH 0304/1519] NFSv4: Fix acl buffer size resp_len is passed in as buffer size to decode routine; make sure it's set right in case where userspace provides less than a page's worth of buffer. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ff378126ccd7..2d9357cf3fc5 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2357,7 +2357,7 @@ static inline ssize_t nfs4_get_acl_uncached(struct inode *inode, void *buf, size return -ENOMEM; args.acl_pages[0] = localpage; args.acl_pgbase = 0; - args.acl_len = PAGE_SIZE; + resp_len = args.acl_len = PAGE_SIZE; } else { resp_buf = buf; buf_to_pages(buf, buflen, args.acl_pages, &args.acl_pgbase); -- GitLab From 293f1eb551a77fe5c8956a559a3c0baea95cd9bc Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:54:37 -0400 Subject: [PATCH 0305/1519] SUNRPC: Add support for privacy to generic gss-api code. Add support for privacy to generic gss-api code. This is dead code until we have both a mechanism that supports privacy and code in the client or server that uses it. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/gss_api.h | 22 ++++++++++++++++++++++ net/sunrpc/auth_gss/gss_mech_switch.c | 22 ++++++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h index 689262f63059..e896752ffbf9 100644 --- a/include/linux/sunrpc/gss_api.h +++ b/include/linux/sunrpc/gss_api.h @@ -48,6 +48,17 @@ u32 gss_verify_mic( struct xdr_buf *message, struct xdr_netobj *mic_token, u32 *qstate); +u32 gss_wrap( + struct gss_ctx *ctx_id, + u32 qop, + int offset, + struct xdr_buf *outbuf, + struct page **inpages); +u32 gss_unwrap( + struct gss_ctx *ctx_id, + u32 *qop, + int offset, + struct xdr_buf *inbuf); u32 gss_delete_sec_context( struct gss_ctx **ctx_id); @@ -93,6 +104,17 @@ struct gss_api_ops { struct xdr_buf *message, struct xdr_netobj *mic_token, u32 *qstate); + u32 (*gss_wrap)( + struct gss_ctx *ctx_id, + u32 qop, + int offset, + struct xdr_buf *outbuf, + struct page **inpages); + u32 (*gss_unwrap)( + struct gss_ctx *ctx_id, + u32 *qop, + int offset, + struct xdr_buf *buf); void (*gss_delete_sec_context)( void *internal_ctx_id); }; diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c index 58aeaddd8c79..06d97cb3481a 100644 --- a/net/sunrpc/auth_gss/gss_mech_switch.c +++ b/net/sunrpc/auth_gss/gss_mech_switch.c @@ -276,6 +276,28 @@ gss_verify_mic(struct gss_ctx *context_handle, qstate); } +u32 +gss_wrap(struct gss_ctx *ctx_id, + u32 qop, + int offset, + struct xdr_buf *buf, + struct page **inpages) +{ + return ctx_id->mech_type->gm_ops + ->gss_wrap(ctx_id, qop, offset, buf, inpages); +} + +u32 +gss_unwrap(struct gss_ctx *ctx_id, + u32 *qop, + int offset, + struct xdr_buf *buf) +{ + return ctx_id->mech_type->gm_ops + ->gss_unwrap(ctx_id, qop, offset, buf); +} + + /* gss_delete_sec_context: free all resources associated with context_handle. * Note this differs from the RFC 2744-specified prototype in that we don't * bother returning an output token, since it would never be used anyway. */ -- GitLab From ead5e1c26fdcd969cf40c49cb0589d56879d240d Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:54:43 -0400 Subject: [PATCH 0306/1519] SUNRPC: Provide a callback to allow free pages allocated during xdr encoding For privacy, we need to allocate pages to store the encrypted data (passed in pages can't be used without the risk of corrupting data in the page cache). So we need a way to free that memory after the request has been transmitted. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 5 ++++- net/sunrpc/xprt.c | 3 +++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 068e1fb0868b..3b8b6e823c70 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -73,7 +73,10 @@ struct rpc_rqst { int rq_cong; /* has incremented xprt->cong */ int rq_received; /* receive completed */ u32 rq_seqno; /* gss seq no. used on req. */ - + int rq_enc_pages_num; + struct page **rq_enc_pages; /* scratch pages for use by + gss privacy code */ + void (*rq_release_snd_buf)(struct rpc_rqst *); /* release rq_enc_pages */ struct list_head rq_list; struct xdr_buf rq_private_buf; /* The receive buffer diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 1ba55dc38b7a..6dda3860351f 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -839,6 +839,7 @@ static void xprt_request_init(struct rpc_task *task, struct rpc_xprt *xprt) req->rq_task = task; req->rq_xprt = xprt; req->rq_xid = xprt_alloc_xid(xprt); + req->rq_release_snd_buf = NULL; dprintk("RPC: %4d reserved req %p xid %08x\n", task->tk_pid, req, ntohl(req->rq_xid)); } @@ -867,6 +868,8 @@ void xprt_release(struct rpc_task *task) xprt->last_used + xprt->idle_timeout); spin_unlock_bh(&xprt->transport_lock); task->tk_rqstp = NULL; + if (req->rq_release_snd_buf) + req->rq_release_snd_buf(req); memset(req, 0, sizeof(*req)); /* mark unused */ dprintk("RPC: %4d release request %p\n", task->tk_pid, req); -- GitLab From f3680312a737355ddf35c1b68af25e384d7ef0a8 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:54:48 -0400 Subject: [PATCH 0307/1519] SUNRPC: Retry wrap in case of memory allocation failure. For privacy we need to allocate extra pages to hold encrypted page data when wrapping requests. This allocation may fail, and we handle that case by waiting and retrying. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 534274056329..702ede309b06 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -710,9 +710,16 @@ call_encode(struct rpc_task *task) rpc_exit(task, -EIO); return; } - if (encode != NULL) - task->tk_status = rpcauth_wrap_req(task, encode, req, p, - task->tk_msg.rpc_argp); + if (encode == NULL) + return; + + task->tk_status = rpcauth_wrap_req(task, encode, req, p, + task->tk_msg.rpc_argp); + if (task->tk_status == -ENOMEM) { + /* XXX: Is this sane? */ + rpc_delay(task, 3*HZ); + task->tk_status = -EAGAIN; + } } /* -- GitLab From 24b2605becc10ca63c4c30808fa59a8abbf68727 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:54:53 -0400 Subject: [PATCH 0308/1519] RPCSEC_GSS: cleanup au_rslack calculation Various xdr encode routines use au_rslack to guess where the reply argument will end up, so we can set up the xdr_buf to recieve data into the right place for zero copy. Currently we calculate the au_rslack estimate when we check the verifier. Normally this only depends on the verifier size. In the integrity case we add a few bytes to allow for a length and sequence number. It's a bit simpler to calculate only the verifier size when we check the verifier, and delay the full calculation till we unwrap. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/auth.h | 7 ++++++- net/sunrpc/auth_gss/auth_gss.c | 20 ++++++-------------- 2 files changed, 12 insertions(+), 15 deletions(-) diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h index 04ebc24db348..b68c11a2d6dd 100644 --- a/include/linux/sunrpc/auth.h +++ b/include/linux/sunrpc/auth.h @@ -66,7 +66,12 @@ struct rpc_cred_cache { struct rpc_auth { unsigned int au_cslack; /* call cred size estimate */ - unsigned int au_rslack; /* reply verf size guess */ + /* guess at number of u32's auth adds before + * reply data; normally the verifier size: */ + unsigned int au_rslack; + /* for gss, used to calculate au_rslack: */ + unsigned int au_verfsize; + unsigned int au_flags; /* various flags */ struct rpc_authops * au_ops; /* operations */ rpc_authflavor_t au_flavor; /* pseudoflavor (note may diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index d2b08f16c257..dc95b797ca65 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -886,8 +886,6 @@ static u32 * gss_validate(struct rpc_task *task, u32 *p) { struct rpc_cred *cred = task->tk_msg.rpc_cred; - struct gss_cred *gss_cred = container_of(cred, struct gss_cred, - gc_base); struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred); u32 seq, qop_state; struct kvec iov; @@ -915,18 +913,9 @@ gss_validate(struct rpc_task *task, u32 *p) cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE; if (maj_stat) goto out_bad; - switch (gss_cred->gc_service) { - case RPC_GSS_SVC_NONE: - /* verifier data, flavor, length: */ - task->tk_auth->au_rslack = XDR_QUADLEN(len) + 2; - break; - case RPC_GSS_SVC_INTEGRITY: - /* verifier data, flavor, length, length, sequence number: */ - task->tk_auth->au_rslack = XDR_QUADLEN(len) + 4; - break; - case RPC_GSS_SVC_PRIVACY: - goto out_bad; - } + /* We leave it to unwrap to calculate au_rslack. For now we just + * calculate the length of the verifier: */ + task->tk_auth->au_verfsize = XDR_QUADLEN(len) + 2; gss_put_ctx(ctx); dprintk("RPC: %4u GSS gss_validate: gss_verify_mic succeeded.\n", task->tk_pid); @@ -1067,6 +1056,7 @@ gss_unwrap_resp(struct rpc_task *task, struct gss_cred *gss_cred = container_of(cred, struct gss_cred, gc_base); struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred); + u32 *savedp = p; int status = -EIO; if (ctx->gc_proc != RPC_GSS_PROC_DATA) @@ -1082,6 +1072,8 @@ gss_unwrap_resp(struct rpc_task *task, case RPC_GSS_SVC_PRIVACY: break; } + /* take into account extra slack for integrity and privacy cases: */ + task->tk_auth->au_rslack = task->tk_auth->au_verfsize + (p - savedp); out_decode: status = decode(rqstp, p, obj); out: -- GitLab From 2d2da60c63b67174add32f06e8d54c3a0c5cd9cf Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:54:58 -0400 Subject: [PATCH 0309/1519] RPCSEC_GSS: client-side privacy support Add the code to the client side to handle privacy. This is dead code until we actually add privacy support to krb5. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 149 ++++++++++++++++++++++++++++++++- 1 file changed, 148 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index dc95b797ca65..5e4872058ec7 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include #include @@ -975,6 +976,114 @@ gss_wrap_req_integ(struct rpc_cred *cred, struct gss_cl_ctx *ctx, return 0; } +static void +priv_release_snd_buf(struct rpc_rqst *rqstp) +{ + int i; + + for (i=0; i < rqstp->rq_enc_pages_num; i++) + __free_page(rqstp->rq_enc_pages[i]); + kfree(rqstp->rq_enc_pages); +} + +static int +alloc_enc_pages(struct rpc_rqst *rqstp) +{ + struct xdr_buf *snd_buf = &rqstp->rq_snd_buf; + int first, last, i; + + if (snd_buf->page_len == 0) { + rqstp->rq_enc_pages_num = 0; + return 0; + } + + first = snd_buf->page_base >> PAGE_CACHE_SHIFT; + last = (snd_buf->page_base + snd_buf->page_len - 1) >> PAGE_CACHE_SHIFT; + rqstp->rq_enc_pages_num = last - first + 1 + 1; + rqstp->rq_enc_pages + = kmalloc(rqstp->rq_enc_pages_num * sizeof(struct page *), + GFP_NOFS); + if (!rqstp->rq_enc_pages) + goto out; + for (i=0; i < rqstp->rq_enc_pages_num; i++) { + rqstp->rq_enc_pages[i] = alloc_page(GFP_NOFS); + if (rqstp->rq_enc_pages[i] == NULL) + goto out_free; + } + rqstp->rq_release_snd_buf = priv_release_snd_buf; + return 0; +out_free: + for (i--; i >= 0; i--) { + __free_page(rqstp->rq_enc_pages[i]); + } +out: + return -EAGAIN; +} + +static inline int +gss_wrap_req_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx, + kxdrproc_t encode, struct rpc_rqst *rqstp, u32 *p, void *obj) +{ + struct xdr_buf *snd_buf = &rqstp->rq_snd_buf; + u32 offset; + u32 maj_stat; + int status; + u32 *opaque_len; + struct page **inpages; + int first; + int pad; + struct kvec *iov; + char *tmp; + + opaque_len = p++; + offset = (u8 *)p - (u8 *)snd_buf->head[0].iov_base; + *p++ = htonl(rqstp->rq_seqno); + + status = encode(rqstp, p, obj); + if (status) + return status; + + status = alloc_enc_pages(rqstp); + if (status) + return status; + first = snd_buf->page_base >> PAGE_CACHE_SHIFT; + inpages = snd_buf->pages + first; + snd_buf->pages = rqstp->rq_enc_pages; + snd_buf->page_base -= first << PAGE_CACHE_SHIFT; + /* Give the tail its own page, in case we need extra space in the + * head when wrapping: */ + if (snd_buf->page_len || snd_buf->tail[0].iov_len) { + tmp = page_address(rqstp->rq_enc_pages[rqstp->rq_enc_pages_num - 1]); + memcpy(tmp, snd_buf->tail[0].iov_base, snd_buf->tail[0].iov_len); + snd_buf->tail[0].iov_base = tmp; + } + maj_stat = gss_wrap(ctx->gc_gss_ctx, GSS_C_QOP_DEFAULT, offset, + snd_buf, inpages); + /* RPC_SLACK_SPACE should prevent this ever happening: */ + BUG_ON(snd_buf->len > snd_buf->buflen); + status = -EIO; + /* We're assuming that when GSS_S_CONTEXT_EXPIRED, the encryption was + * done anyway, so it's safe to put the request on the wire: */ + if (maj_stat == GSS_S_CONTEXT_EXPIRED) + cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE; + else if (maj_stat) + return status; + + *opaque_len = htonl(snd_buf->len - offset); + /* guess whether we're in the head or the tail: */ + if (snd_buf->page_len || snd_buf->tail[0].iov_len) + iov = snd_buf->tail; + else + iov = snd_buf->head; + p = iov->iov_base + iov->iov_len; + pad = 3 - ((snd_buf->len - offset - 1) & 3); + memset(p, 0, pad); + iov->iov_len += pad; + snd_buf->len += pad; + + return 0; +} + static int gss_wrap_req(struct rpc_task *task, kxdrproc_t encode, void *rqstp, u32 *p, void *obj) @@ -1002,6 +1111,8 @@ gss_wrap_req(struct rpc_task *task, rqstp, p, obj); break; case RPC_GSS_SVC_PRIVACY: + status = gss_wrap_req_priv(cred, ctx, encode, + rqstp, p, obj); break; } out: @@ -1048,6 +1159,36 @@ gss_unwrap_resp_integ(struct rpc_cred *cred, struct gss_cl_ctx *ctx, return 0; } +static inline int +gss_unwrap_resp_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx, + struct rpc_rqst *rqstp, u32 **p) +{ + struct xdr_buf *rcv_buf = &rqstp->rq_rcv_buf; + u32 offset; + u32 opaque_len; + u32 maj_stat; + int status = -EIO; + + opaque_len = ntohl(*(*p)++); + offset = (u8 *)(*p) - (u8 *)rcv_buf->head[0].iov_base; + if (offset + opaque_len > rcv_buf->len) + return status; + /* remove padding: */ + rcv_buf->len = offset + opaque_len; + + maj_stat = gss_unwrap(ctx->gc_gss_ctx, NULL, + offset, rcv_buf); + if (maj_stat == GSS_S_CONTEXT_EXPIRED) + cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE; + if (maj_stat != GSS_S_COMPLETE) + return status; + if (ntohl(*(*p)++) != rqstp->rq_seqno) + return status; + + return 0; +} + + static int gss_unwrap_resp(struct rpc_task *task, kxdrproc_t decode, void *rqstp, u32 *p, void *obj) @@ -1057,6 +1198,8 @@ gss_unwrap_resp(struct rpc_task *task, gc_base); struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred); u32 *savedp = p; + struct kvec *head = ((struct rpc_rqst *)rqstp)->rq_rcv_buf.head; + int savedlen = head->iov_len; int status = -EIO; if (ctx->gc_proc != RPC_GSS_PROC_DATA) @@ -1070,10 +1213,14 @@ gss_unwrap_resp(struct rpc_task *task, goto out; break; case RPC_GSS_SVC_PRIVACY: + status = gss_unwrap_resp_priv(cred, ctx, rqstp, &p); + if (status) + goto out; break; } /* take into account extra slack for integrity and privacy cases: */ - task->tk_auth->au_rslack = task->tk_auth->au_verfsize + (p - savedp); + task->tk_auth->au_rslack = task->tk_auth->au_verfsize + (p - savedp) + + (savedlen - head->iov_len); out_decode: status = decode(rqstp, p, obj); out: -- GitLab From f7b3af64c653c73feb060a9f94f2df9ab4bba4c3 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:55:03 -0400 Subject: [PATCH 0310/1519] RPCSEC_GSS: Simplify rpcsec_gss crypto code Factor out some code that will be shared by privacy crypto routines Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/gss_krb5_crypto.c | 106 +++++++++++++++++++------- 1 file changed, 77 insertions(+), 29 deletions(-) diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c index ee6ae74cd1b2..2baf93f8b8f5 100644 --- a/net/sunrpc/auth_gss/gss_krb5_crypto.c +++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c @@ -139,6 +139,82 @@ buf_to_sg(struct scatterlist *sg, char *ptr, int len) { sg->length = len; } +static int +process_xdr_buf(struct xdr_buf *buf, int offset, int len, + int (*actor)(struct scatterlist *, void *), void *data) +{ + int i, page_len, thislen, page_offset, ret = 0; + struct scatterlist sg[1]; + + if (offset >= buf->head[0].iov_len) { + offset -= buf->head[0].iov_len; + } else { + thislen = buf->head[0].iov_len - offset; + if (thislen > len) + thislen = len; + buf_to_sg(sg, buf->head[0].iov_base + offset, thislen); + ret = actor(sg, data); + if (ret) + goto out; + offset = 0; + len -= thislen; + } + if (len == 0) + goto out; + + if (offset >= buf->page_len) { + offset -= buf->page_len; + } else { + page_len = buf->page_len - offset; + if (page_len > len) + page_len = len; + len -= page_len; + page_offset = (offset + buf->page_base) & (PAGE_CACHE_SIZE - 1); + i = (offset + buf->page_base) >> PAGE_CACHE_SHIFT; + thislen = PAGE_CACHE_SIZE - page_offset; + do { + if (thislen > page_len) + thislen = page_len; + sg->page = buf->pages[i]; + sg->offset = page_offset; + sg->length = thislen; + ret = actor(sg, data); + if (ret) + goto out; + page_len -= thislen; + i++; + page_offset = 0; + thislen = PAGE_CACHE_SIZE; + } while (page_len != 0); + offset = 0; + } + if (len == 0) + goto out; + + if (offset < buf->tail[0].iov_len) { + thislen = buf->tail[0].iov_len - offset; + if (thislen > len) + thislen = len; + buf_to_sg(sg, buf->tail[0].iov_base + offset, thislen); + ret = actor(sg, data); + len -= thislen; + } + if (len != 0) + ret = -EINVAL; +out: + return ret; +} + +static int +checksummer(struct scatterlist *sg, void *data) +{ + struct crypto_tfm *tfm = (struct crypto_tfm *)data; + + crypto_digest_update(tfm, sg, 1); + + return 0; +} + /* checksum the plaintext data and hdrlen bytes of the token header */ s32 make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, @@ -148,8 +224,6 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, struct crypto_tfm *tfm = NULL; /* XXX add to ctx? */ struct scatterlist sg[1]; u32 code = GSS_S_FAILURE; - int len, thislen, offset; - int i; switch (cksumtype) { case CKSUMTYPE_RSA_MD5: @@ -169,33 +243,7 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, crypto_digest_init(tfm); buf_to_sg(sg, header, hdrlen); crypto_digest_update(tfm, sg, 1); - if (body->head[0].iov_len) { - buf_to_sg(sg, body->head[0].iov_base, body->head[0].iov_len); - crypto_digest_update(tfm, sg, 1); - } - - len = body->page_len; - if (len != 0) { - offset = body->page_base & (PAGE_CACHE_SIZE - 1); - i = body->page_base >> PAGE_CACHE_SHIFT; - thislen = PAGE_CACHE_SIZE - offset; - do { - if (thislen > len) - thislen = len; - sg->page = body->pages[i]; - sg->offset = offset; - sg->length = thislen; - crypto_digest_update(tfm, sg, 1); - len -= thislen; - i++; - offset = 0; - thislen = PAGE_CACHE_SIZE; - } while(len != 0); - } - if (body->tail[0].iov_len) { - buf_to_sg(sg, body->tail[0].iov_base, body->tail[0].iov_len); - crypto_digest_update(tfm, sg, 1); - } + process_xdr_buf(body, 0, body->len, checksummer, tfm); crypto_digest_final(tfm, cksum->data); code = 0; out: -- GitLab From bfa91516b57483fc9c81d8d90325fd2c3c16ac48 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:55:08 -0400 Subject: [PATCH 0311/1519] RPCSEC_GSS: krb5 pre-privacy cleanup The code this was originally derived from processed wrap and mic tokens using the same functions. This required some contortions, and more would be required with the addition of xdr_buf's, so it's better to separate out the two code paths. In preparation for adding privacy support, remove the last vestiges of the old wrap token code. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/gss_krb5.h | 5 ++-- net/sunrpc/auth_gss/gss_krb5_mech.c | 5 ++-- net/sunrpc/auth_gss/gss_krb5_seal.c | 38 +++++---------------------- net/sunrpc/auth_gss/gss_krb5_unseal.c | 30 +++++---------------- 4 files changed, 16 insertions(+), 62 deletions(-) diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h index ffe31d2eb9ec..cb35833e2ae3 100644 --- a/include/linux/sunrpc/gss_krb5.h +++ b/include/linux/sunrpc/gss_krb5.h @@ -121,13 +121,12 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, u32 krb5_make_token(struct krb5_ctx *context_handle, int qop_req, struct xdr_buf *input_message_buffer, - struct xdr_netobj *output_message_buffer, int toktype); + struct xdr_netobj *output_message_buffer); u32 krb5_read_token(struct krb5_ctx *context_handle, struct xdr_netobj *input_token_buffer, - struct xdr_buf *message_buffer, - int *qop_state, int toktype); + struct xdr_buf *message_buffer, int *qop_state); u32 krb5_encrypt(struct crypto_tfm * key, diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index 462c5b86b073..8b9066fdfda5 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -199,8 +199,7 @@ gss_verify_mic_kerberos(struct gss_ctx *ctx, int qop_state; struct krb5_ctx *kctx = ctx->internal_ctx_id; - maj_stat = krb5_read_token(kctx, mic_token, message, &qop_state, - KG_TOK_MIC_MSG); + maj_stat = krb5_read_token(kctx, mic_token, message, &qop_state); if (!maj_stat && qop_state) *qstate = qop_state; @@ -216,7 +215,7 @@ gss_get_mic_kerberos(struct gss_ctx *ctx, u32 err = 0; struct krb5_ctx *kctx = ctx->internal_ctx_id; - err = krb5_make_token(kctx, qop, message, mic_token, KG_TOK_MIC_MSG); + err = krb5_make_token(kctx, qop, message, mic_token); dprintk("RPC: gss_get_mic_kerberos returning %d\n",err); diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c index afeeb8715a77..2511834e6e52 100644 --- a/net/sunrpc/auth_gss/gss_krb5_seal.c +++ b/net/sunrpc/auth_gss/gss_krb5_seal.c @@ -70,22 +70,12 @@ # define RPCDBG_FACILITY RPCDBG_AUTH #endif -static inline int -gss_krb5_padding(int blocksize, int length) { - /* Most of the code is block-size independent but in practice we - * use only 8: */ - BUG_ON(blocksize != 8); - return 8 - (length & 7); -} - u32 krb5_make_token(struct krb5_ctx *ctx, int qop_req, - struct xdr_buf *text, struct xdr_netobj *token, - int toktype) + struct xdr_buf *text, struct xdr_netobj *token) { s32 checksum_type; struct xdr_netobj md5cksum = {.len = 0, .data = NULL}; - int blocksize = 0, tmsglen; unsigned char *ptr, *krb5_hdr, *msg_start; s32 now; @@ -111,21 +101,13 @@ krb5_make_token(struct krb5_ctx *ctx, int qop_req, goto out_err; } - if (toktype == KG_TOK_WRAP_MSG) { - blocksize = crypto_tfm_alg_blocksize(ctx->enc); - tmsglen = blocksize + text->len - + gss_krb5_padding(blocksize, blocksize + text->len); - } else { - tmsglen = 0; - } - - token->len = g_token_size(&ctx->mech_used, 22 + tmsglen); + token->len = g_token_size(&ctx->mech_used, 22); ptr = token->data; - g_make_token_header(&ctx->mech_used, 22 + tmsglen, &ptr); + g_make_token_header(&ctx->mech_used, 22, &ptr); - *ptr++ = (unsigned char) ((toktype>>8)&0xff); - *ptr++ = (unsigned char) (toktype&0xff); + *ptr++ = (unsigned char) ((KG_TOK_MIC_MSG>>8)&0xff); + *ptr++ = (unsigned char) (KG_TOK_MIC_MSG&0xff); /* ptr now at byte 2 of header described in rfc 1964, section 1.2.1: */ krb5_hdr = ptr - 2; @@ -133,17 +115,9 @@ krb5_make_token(struct krb5_ctx *ctx, int qop_req, *(u16 *)(krb5_hdr + 2) = htons(ctx->signalg); memset(krb5_hdr + 4, 0xff, 4); - if (toktype == KG_TOK_WRAP_MSG) - *(u16 *)(krb5_hdr + 4) = htons(ctx->sealalg); - if (toktype == KG_TOK_WRAP_MSG) { - /* XXX removing support for now */ + if (make_checksum(checksum_type, krb5_hdr, 8, text, &md5cksum)) goto out_err; - } else { /* Sign only. */ - if (make_checksum(checksum_type, krb5_hdr, 8, text, - &md5cksum)) - goto out_err; - } switch (ctx->signalg) { case SGN_ALG_DES_MAC_MD5: diff --git a/net/sunrpc/auth_gss/gss_krb5_unseal.c b/net/sunrpc/auth_gss/gss_krb5_unseal.c index 8767fc53183d..19eba3df6607 100644 --- a/net/sunrpc/auth_gss/gss_krb5_unseal.c +++ b/net/sunrpc/auth_gss/gss_krb5_unseal.c @@ -68,20 +68,13 @@ #endif -/* message_buffer is an input if toktype is MIC and an output if it is WRAP: - * If toktype is MIC: read_token is a mic token, and message_buffer is the - * data that the mic was supposedly taken over. - * If toktype is WRAP: read_token is a wrap token, and message_buffer is used - * to return the decrypted data. - */ +/* read_token is a mic token, and message_buffer is the data that the mic was + * supposedly taken over. */ -/* XXX will need to change prototype and/or just split into a separate function - * when we add privacy (because read_token will be in pages too). */ u32 krb5_read_token(struct krb5_ctx *ctx, struct xdr_netobj *read_token, - struct xdr_buf *message_buffer, - int *qop_state, int toktype) + struct xdr_buf *message_buffer, int *qop_state) { int signalg; int sealalg; @@ -100,16 +93,12 @@ krb5_read_token(struct krb5_ctx *ctx, read_token->len)) goto out; - if ((*ptr++ != ((toktype>>8)&0xff)) || (*ptr++ != (toktype&0xff))) + if ((*ptr++ != ((KG_TOK_MIC_MSG>>8)&0xff)) || + (*ptr++ != ( KG_TOK_MIC_MSG &0xff)) ) goto out; /* XXX sanity-check bodysize?? */ - if (toktype == KG_TOK_WRAP_MSG) { - /* XXX gone */ - goto out; - } - /* get the sign and seal algorithms */ signalg = ptr[0] + (ptr[1] << 8); @@ -120,14 +109,7 @@ krb5_read_token(struct krb5_ctx *ctx, if ((ptr[4] != 0xff) || (ptr[5] != 0xff)) goto out; - if (((toktype != KG_TOK_WRAP_MSG) && (sealalg != 0xffff)) || - ((toktype == KG_TOK_WRAP_MSG) && (sealalg == 0xffff))) - goto out; - - /* in the current spec, there is only one valid seal algorithm per - key type, so a simple comparison is ok */ - - if ((toktype == KG_TOK_WRAP_MSG) && !(sealalg == ctx->sealalg)) + if (sealalg != 0xffff) goto out; /* there are several mappings of seal algorithms to sign algorithms, -- GitLab From 14ae162c24d985593d5b19437d7f3d8fd0062b59 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:55:13 -0400 Subject: [PATCH 0312/1519] RPCSEC_GSS: Add support for privacy to krb5 rpcsec_gss mechanism. Add support for privacy to the krb5 rpcsec_gss mechanism. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/gss_krb5.h | 18 +- net/sunrpc/auth_gss/Makefile | 2 +- net/sunrpc/auth_gss/gss_krb5_crypto.c | 156 ++++++++++- net/sunrpc/auth_gss/gss_krb5_mech.c | 7 + net/sunrpc/auth_gss/gss_krb5_seal.c | 4 +- net/sunrpc/auth_gss/gss_krb5_unseal.c | 2 +- net/sunrpc/auth_gss/gss_krb5_wrap.c | 370 ++++++++++++++++++++++++++ 7 files changed, 552 insertions(+), 7 deletions(-) create mode 100644 net/sunrpc/auth_gss/gss_krb5_wrap.c diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h index cb35833e2ae3..7f93c2d5ebdb 100644 --- a/include/linux/sunrpc/gss_krb5.h +++ b/include/linux/sunrpc/gss_krb5.h @@ -116,7 +116,7 @@ enum seal_alg { s32 make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, - struct xdr_netobj *cksum); + int body_offset, struct xdr_netobj *cksum); u32 krb5_make_token(struct krb5_ctx *context_handle, int qop_req, @@ -128,6 +128,15 @@ krb5_read_token(struct krb5_ctx *context_handle, struct xdr_netobj *input_token_buffer, struct xdr_buf *message_buffer, int *qop_state); +u32 +gss_wrap_kerberos(struct gss_ctx *ctx_id, u32 qop, int offset, + struct xdr_buf *outbuf, struct page **pages); + +u32 +gss_unwrap_kerberos(struct gss_ctx *ctx_id, u32 *qop, int offset, + struct xdr_buf *buf); + + u32 krb5_encrypt(struct crypto_tfm * key, void *iv, void *in, void *out, int length); @@ -136,6 +145,13 @@ u32 krb5_decrypt(struct crypto_tfm * key, void *iv, void *in, void *out, int length); +int +gss_encrypt_xdr_buf(struct crypto_tfm *tfm, struct xdr_buf *outbuf, int offset, + struct page **pages); + +int +gss_decrypt_xdr_buf(struct crypto_tfm *tfm, struct xdr_buf *inbuf, int offset); + s32 krb5_make_seq_num(struct crypto_tfm * key, int direction, diff --git a/net/sunrpc/auth_gss/Makefile b/net/sunrpc/auth_gss/Makefile index fe1b874084bc..f3431a7e33da 100644 --- a/net/sunrpc/auth_gss/Makefile +++ b/net/sunrpc/auth_gss/Makefile @@ -10,7 +10,7 @@ auth_rpcgss-objs := auth_gss.o gss_generic_token.o \ obj-$(CONFIG_RPCSEC_GSS_KRB5) += rpcsec_gss_krb5.o rpcsec_gss_krb5-objs := gss_krb5_mech.o gss_krb5_seal.o gss_krb5_unseal.o \ - gss_krb5_seqnum.o + gss_krb5_seqnum.o gss_krb5_wrap.o obj-$(CONFIG_RPCSEC_GSS_SPKM3) += rpcsec_gss_spkm3.o diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c index 2baf93f8b8f5..3f3d5437f02d 100644 --- a/net/sunrpc/auth_gss/gss_krb5_crypto.c +++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c @@ -218,7 +218,7 @@ checksummer(struct scatterlist *sg, void *data) /* checksum the plaintext data and hdrlen bytes of the token header */ s32 make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, - struct xdr_netobj *cksum) + int body_offset, struct xdr_netobj *cksum) { char *cksumname; struct crypto_tfm *tfm = NULL; /* XXX add to ctx? */ @@ -243,7 +243,8 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, crypto_digest_init(tfm); buf_to_sg(sg, header, hdrlen); crypto_digest_update(tfm, sg, 1); - process_xdr_buf(body, 0, body->len, checksummer, tfm); + process_xdr_buf(body, body_offset, body->len - body_offset, + checksummer, tfm); crypto_digest_final(tfm, cksum->data); code = 0; out: @@ -252,3 +253,154 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, } EXPORT_SYMBOL(make_checksum); + +struct encryptor_desc { + u8 iv[8]; /* XXX hard-coded blocksize */ + struct crypto_tfm *tfm; + int pos; + struct xdr_buf *outbuf; + struct page **pages; + struct scatterlist infrags[4]; + struct scatterlist outfrags[4]; + int fragno; + int fraglen; +}; + +static int +encryptor(struct scatterlist *sg, void *data) +{ + struct encryptor_desc *desc = data; + struct xdr_buf *outbuf = desc->outbuf; + struct page *in_page; + int thislen = desc->fraglen + sg->length; + int fraglen, ret; + int page_pos; + + /* Worst case is 4 fragments: head, end of page 1, start + * of page 2, tail. Anything more is a bug. */ + BUG_ON(desc->fragno > 3); + desc->infrags[desc->fragno] = *sg; + desc->outfrags[desc->fragno] = *sg; + + page_pos = desc->pos - outbuf->head[0].iov_len; + if (page_pos >= 0 && page_pos < outbuf->page_len) { + /* pages are not in place: */ + int i = (page_pos + outbuf->page_base) >> PAGE_CACHE_SHIFT; + in_page = desc->pages[i]; + } else { + in_page = sg->page; + } + desc->infrags[desc->fragno].page = in_page; + desc->fragno++; + desc->fraglen += sg->length; + desc->pos += sg->length; + + fraglen = thislen & 7; /* XXX hardcoded blocksize */ + thislen -= fraglen; + + if (thislen == 0) + return 0; + + ret = crypto_cipher_encrypt_iv(desc->tfm, desc->outfrags, desc->infrags, + thislen, desc->iv); + if (ret) + return ret; + if (fraglen) { + desc->outfrags[0].page = sg->page; + desc->outfrags[0].offset = sg->offset + sg->length - fraglen; + desc->outfrags[0].length = fraglen; + desc->infrags[0] = desc->outfrags[0]; + desc->infrags[0].page = in_page; + desc->fragno = 1; + desc->fraglen = fraglen; + } else { + desc->fragno = 0; + desc->fraglen = 0; + } + return 0; +} + +int +gss_encrypt_xdr_buf(struct crypto_tfm *tfm, struct xdr_buf *buf, int offset, + struct page **pages) +{ + int ret; + struct encryptor_desc desc; + + BUG_ON((buf->len - offset) % crypto_tfm_alg_blocksize(tfm) != 0); + + memset(desc.iv, 0, sizeof(desc.iv)); + desc.tfm = tfm; + desc.pos = offset; + desc.outbuf = buf; + desc.pages = pages; + desc.fragno = 0; + desc.fraglen = 0; + + ret = process_xdr_buf(buf, offset, buf->len - offset, encryptor, &desc); + return ret; +} + +EXPORT_SYMBOL(gss_encrypt_xdr_buf); + +struct decryptor_desc { + u8 iv[8]; /* XXX hard-coded blocksize */ + struct crypto_tfm *tfm; + struct scatterlist frags[4]; + int fragno; + int fraglen; +}; + +static int +decryptor(struct scatterlist *sg, void *data) +{ + struct decryptor_desc *desc = data; + int thislen = desc->fraglen + sg->length; + int fraglen, ret; + + /* Worst case is 4 fragments: head, end of page 1, start + * of page 2, tail. Anything more is a bug. */ + BUG_ON(desc->fragno > 3); + desc->frags[desc->fragno] = *sg; + desc->fragno++; + desc->fraglen += sg->length; + + fraglen = thislen & 7; /* XXX hardcoded blocksize */ + thislen -= fraglen; + + if (thislen == 0) + return 0; + + ret = crypto_cipher_decrypt_iv(desc->tfm, desc->frags, desc->frags, + thislen, desc->iv); + if (ret) + return ret; + if (fraglen) { + desc->frags[0].page = sg->page; + desc->frags[0].offset = sg->offset + sg->length - fraglen; + desc->frags[0].length = fraglen; + desc->fragno = 1; + desc->fraglen = fraglen; + } else { + desc->fragno = 0; + desc->fraglen = 0; + } + return 0; +} + +int +gss_decrypt_xdr_buf(struct crypto_tfm *tfm, struct xdr_buf *buf, int offset) +{ + struct decryptor_desc desc; + + /* XXXJBF: */ + BUG_ON((buf->len - offset) % crypto_tfm_alg_blocksize(tfm) != 0); + + memset(desc.iv, 0, sizeof(desc.iv)); + desc.tfm = tfm; + desc.fragno = 0; + desc.fraglen = 0; + return process_xdr_buf(buf, offset, buf->len - offset, decryptor, &desc); +} + +EXPORT_SYMBOL(gss_decrypt_xdr_buf); diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index 8b9066fdfda5..37a9ad97ccd4 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -226,6 +226,8 @@ static struct gss_api_ops gss_kerberos_ops = { .gss_import_sec_context = gss_import_sec_context_kerberos, .gss_get_mic = gss_get_mic_kerberos, .gss_verify_mic = gss_verify_mic_kerberos, + .gss_wrap = gss_wrap_kerberos, + .gss_unwrap = gss_unwrap_kerberos, .gss_delete_sec_context = gss_delete_sec_context_kerberos, }; @@ -240,6 +242,11 @@ static struct pf_desc gss_kerberos_pfs[] = { .service = RPC_GSS_SVC_INTEGRITY, .name = "krb5i", }, + [2] = { + .pseudoflavor = RPC_AUTH_GSS_KRB5P, + .service = RPC_GSS_SVC_PRIVACY, + .name = "krb5p", + }, }; static struct gss_api_mech gss_kerberos_mech = { diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c index 2511834e6e52..fb852d9ab06f 100644 --- a/net/sunrpc/auth_gss/gss_krb5_seal.c +++ b/net/sunrpc/auth_gss/gss_krb5_seal.c @@ -116,8 +116,8 @@ krb5_make_token(struct krb5_ctx *ctx, int qop_req, *(u16 *)(krb5_hdr + 2) = htons(ctx->signalg); memset(krb5_hdr + 4, 0xff, 4); - if (make_checksum(checksum_type, krb5_hdr, 8, text, &md5cksum)) - goto out_err; + if (make_checksum(checksum_type, krb5_hdr, 8, text, 0, &md5cksum)) + goto out_err; switch (ctx->signalg) { case SGN_ALG_DES_MAC_MD5: diff --git a/net/sunrpc/auth_gss/gss_krb5_unseal.c b/net/sunrpc/auth_gss/gss_krb5_unseal.c index 19eba3df6607..c3d6d1bc100c 100644 --- a/net/sunrpc/auth_gss/gss_krb5_unseal.c +++ b/net/sunrpc/auth_gss/gss_krb5_unseal.c @@ -136,7 +136,7 @@ krb5_read_token(struct krb5_ctx *ctx, switch (signalg) { case SGN_ALG_DES_MAC_MD5: ret = make_checksum(checksum_type, ptr - 2, 8, - message_buffer, &md5cksum); + message_buffer, 0, &md5cksum); if (ret) goto out; diff --git a/net/sunrpc/auth_gss/gss_krb5_wrap.c b/net/sunrpc/auth_gss/gss_krb5_wrap.c new file mode 100644 index 000000000000..ddcde6e42b23 --- /dev/null +++ b/net/sunrpc/auth_gss/gss_krb5_wrap.c @@ -0,0 +1,370 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef RPC_DEBUG +# define RPCDBG_FACILITY RPCDBG_AUTH +#endif + +static inline int +gss_krb5_padding(int blocksize, int length) +{ + /* Most of the code is block-size independent but currently we + * use only 8: */ + BUG_ON(blocksize != 8); + return 8 - (length & 7); +} + +static inline void +gss_krb5_add_padding(struct xdr_buf *buf, int offset, int blocksize) +{ + int padding = gss_krb5_padding(blocksize, buf->len - offset); + char *p; + struct kvec *iov; + + if (buf->page_len || buf->tail[0].iov_len) + iov = &buf->tail[0]; + else + iov = &buf->head[0]; + p = iov->iov_base + iov->iov_len; + iov->iov_len += padding; + buf->len += padding; + memset(p, padding, padding); +} + +static inline int +gss_krb5_remove_padding(struct xdr_buf *buf, int blocksize) +{ + u8 *ptr; + u8 pad; + int len = buf->len; + + if (len <= buf->head[0].iov_len) { + pad = *(u8 *)(buf->head[0].iov_base + len - 1); + if (pad > buf->head[0].iov_len) + return -EINVAL; + buf->head[0].iov_len -= pad; + goto out; + } else + len -= buf->head[0].iov_len; + if (len <= buf->page_len) { + int last = (buf->page_base + len - 1) + >>PAGE_CACHE_SHIFT; + int offset = (buf->page_base + len - 1) + & (PAGE_CACHE_SIZE - 1); + ptr = kmap_atomic(buf->pages[last], KM_SKB_SUNRPC_DATA); + pad = *(ptr + offset); + kunmap_atomic(ptr, KM_SKB_SUNRPC_DATA); + goto out; + } else + len -= buf->page_len; + BUG_ON(len > buf->tail[0].iov_len); + pad = *(u8 *)(buf->tail[0].iov_base + len - 1); +out: + /* XXX: NOTE: we do not adjust the page lengths--they represent + * a range of data in the real filesystem page cache, and we need + * to know that range so the xdr code can properly place read data. + * However adjusting the head length, as we do above, is harmless. + * In the case of a request that fits into a single page, the server + * also uses length and head length together to determine the original + * start of the request to copy the request for deferal; so it's + * easier on the server if we adjust head and tail length in tandem. + * It's not really a problem that we don't fool with the page and + * tail lengths, though--at worst badly formed xdr might lead the + * server to attempt to parse the padding. + * XXX: Document all these weird requirements for gss mechanism + * wrap/unwrap functions. */ + if (pad > blocksize) + return -EINVAL; + if (buf->len > pad) + buf->len -= pad; + else + return -EINVAL; + return 0; +} + +static inline void +make_confounder(char *p, int blocksize) +{ + static u64 i = 0; + u64 *q = (u64 *)p; + + /* rfc1964 claims this should be "random". But all that's really + * necessary is that it be unique. And not even that is necessary in + * our case since our "gssapi" implementation exists only to support + * rpcsec_gss, so we know that the only buffers we will ever encrypt + * already begin with a unique sequence number. Just to hedge my bets + * I'll make a half-hearted attempt at something unique, but ensuring + * uniqueness would mean worrying about atomicity and rollover, and I + * don't care enough. */ + + BUG_ON(blocksize != 8); + *q = i++; +} + +/* Assumptions: the head and tail of inbuf are ours to play with. + * The pages, however, may be real pages in the page cache and we replace + * them with scratch pages from **pages before writing to them. */ +/* XXX: obviously the above should be documentation of wrap interface, + * and shouldn't be in this kerberos-specific file. */ + +/* XXX factor out common code with seal/unseal. */ + +u32 +gss_wrap_kerberos(struct gss_ctx *ctx, u32 qop, int offset, + struct xdr_buf *buf, struct page **pages) +{ + struct krb5_ctx *kctx = ctx->internal_ctx_id; + s32 checksum_type; + struct xdr_netobj md5cksum = {.len = 0, .data = NULL}; + int blocksize = 0, plainlen; + unsigned char *ptr, *krb5_hdr, *msg_start; + s32 now; + int headlen; + struct page **tmp_pages; + + dprintk("RPC: gss_wrap_kerberos\n"); + + now = get_seconds(); + + if (qop != 0) + goto out_err; + + switch (kctx->signalg) { + case SGN_ALG_DES_MAC_MD5: + checksum_type = CKSUMTYPE_RSA_MD5; + break; + default: + dprintk("RPC: gss_krb5_seal: kctx->signalg %d not" + " supported\n", kctx->signalg); + goto out_err; + } + if (kctx->sealalg != SEAL_ALG_NONE && kctx->sealalg != SEAL_ALG_DES) { + dprintk("RPC: gss_krb5_seal: kctx->sealalg %d not supported\n", + kctx->sealalg); + goto out_err; + } + + blocksize = crypto_tfm_alg_blocksize(kctx->enc); + gss_krb5_add_padding(buf, offset, blocksize); + BUG_ON((buf->len - offset) % blocksize); + plainlen = blocksize + buf->len - offset; + + headlen = g_token_size(&kctx->mech_used, 22 + plainlen) - + (buf->len - offset); + + ptr = buf->head[0].iov_base + offset; + /* shift data to make room for header. */ + /* XXX Would be cleverer to encrypt while copying. */ + /* XXX bounds checking, slack, etc. */ + memmove(ptr + headlen, ptr, buf->head[0].iov_len - offset); + buf->head[0].iov_len += headlen; + buf->len += headlen; + BUG_ON((buf->len - offset - headlen) % blocksize); + + g_make_token_header(&kctx->mech_used, 22 + plainlen, &ptr); + + + *ptr++ = (unsigned char) ((KG_TOK_WRAP_MSG>>8)&0xff); + *ptr++ = (unsigned char) (KG_TOK_WRAP_MSG&0xff); + + /* ptr now at byte 2 of header described in rfc 1964, section 1.2.1: */ + krb5_hdr = ptr - 2; + msg_start = krb5_hdr + 24; + /* XXXJBF: */ BUG_ON(buf->head[0].iov_base + offset + headlen != msg_start + blocksize); + + *(u16 *)(krb5_hdr + 2) = htons(kctx->signalg); + memset(krb5_hdr + 4, 0xff, 4); + *(u16 *)(krb5_hdr + 4) = htons(kctx->sealalg); + + make_confounder(msg_start, blocksize); + + /* XXXJBF: UGH!: */ + tmp_pages = buf->pages; + buf->pages = pages; + if (make_checksum(checksum_type, krb5_hdr, 8, buf, + offset + headlen - blocksize, &md5cksum)) + goto out_err; + buf->pages = tmp_pages; + + switch (kctx->signalg) { + case SGN_ALG_DES_MAC_MD5: + if (krb5_encrypt(kctx->seq, NULL, md5cksum.data, + md5cksum.data, md5cksum.len)) + goto out_err; + memcpy(krb5_hdr + 16, + md5cksum.data + md5cksum.len - KRB5_CKSUM_LENGTH, + KRB5_CKSUM_LENGTH); + + dprintk("RPC: make_seal_token: cksum data: \n"); + print_hexl((u32 *) (krb5_hdr + 16), KRB5_CKSUM_LENGTH, 0); + break; + default: + BUG(); + } + + kfree(md5cksum.data); + + /* XXX would probably be more efficient to compute checksum + * and encrypt at the same time: */ + if ((krb5_make_seq_num(kctx->seq, kctx->initiate ? 0 : 0xff, + kctx->seq_send, krb5_hdr + 16, krb5_hdr + 8))) + goto out_err; + + if (gss_encrypt_xdr_buf(kctx->enc, buf, offset + headlen - blocksize, + pages)) + goto out_err; + + kctx->seq_send++; + + return ((kctx->endtime < now) ? GSS_S_CONTEXT_EXPIRED : GSS_S_COMPLETE); +out_err: + if (md5cksum.data) kfree(md5cksum.data); + return GSS_S_FAILURE; +} + +u32 +gss_unwrap_kerberos(struct gss_ctx *ctx, u32 *qop, int offset, + struct xdr_buf *buf) +{ + struct krb5_ctx *kctx = ctx->internal_ctx_id; + int signalg; + int sealalg; + s32 checksum_type; + struct xdr_netobj md5cksum = {.len = 0, .data = NULL}; + s32 now; + int direction; + s32 seqnum; + unsigned char *ptr; + int bodysize; + u32 ret = GSS_S_DEFECTIVE_TOKEN; + void *data_start, *orig_start; + int data_len; + int blocksize; + + dprintk("RPC: gss_unwrap_kerberos\n"); + + ptr = (u8 *)buf->head[0].iov_base + offset; + if (g_verify_token_header(&kctx->mech_used, &bodysize, &ptr, + buf->len - offset)) + goto out; + + if ((*ptr++ != ((KG_TOK_WRAP_MSG>>8)&0xff)) || + (*ptr++ != (KG_TOK_WRAP_MSG &0xff)) ) + goto out; + + /* XXX sanity-check bodysize?? */ + + /* get the sign and seal algorithms */ + + signalg = ptr[0] + (ptr[1] << 8); + sealalg = ptr[2] + (ptr[3] << 8); + + /* Sanity checks */ + + if ((ptr[4] != 0xff) || (ptr[5] != 0xff)) + goto out; + + if (sealalg == 0xffff) + goto out; + + /* in the current spec, there is only one valid seal algorithm per + key type, so a simple comparison is ok */ + + if (sealalg != kctx->sealalg) + goto out; + + /* there are several mappings of seal algorithms to sign algorithms, + but few enough that we can try them all. */ + + if ((kctx->sealalg == SEAL_ALG_NONE && signalg > 1) || + (kctx->sealalg == SEAL_ALG_1 && signalg != SGN_ALG_3) || + (kctx->sealalg == SEAL_ALG_DES3KD && + signalg != SGN_ALG_HMAC_SHA1_DES3_KD)) + goto out; + + if (gss_decrypt_xdr_buf(kctx->enc, buf, + ptr + 22 - (unsigned char *)buf->head[0].iov_base)) + goto out; + + /* compute the checksum of the message */ + + /* initialize the the cksum */ + switch (signalg) { + case SGN_ALG_DES_MAC_MD5: + checksum_type = CKSUMTYPE_RSA_MD5; + break; + default: + ret = GSS_S_DEFECTIVE_TOKEN; + goto out; + } + + switch (signalg) { + case SGN_ALG_DES_MAC_MD5: + ret = make_checksum(checksum_type, ptr - 2, 8, buf, + ptr + 22 - (unsigned char *)buf->head[0].iov_base, &md5cksum); + if (ret) + goto out; + + ret = krb5_encrypt(kctx->seq, NULL, md5cksum.data, + md5cksum.data, md5cksum.len); + if (ret) + goto out; + + if (memcmp(md5cksum.data + 8, ptr + 14, 8)) { + ret = GSS_S_BAD_SIG; + goto out; + } + break; + default: + ret = GSS_S_DEFECTIVE_TOKEN; + goto out; + } + + /* it got through unscathed. Make sure the context is unexpired */ + + if (qop) + *qop = GSS_C_QOP_DEFAULT; + + now = get_seconds(); + + ret = GSS_S_CONTEXT_EXPIRED; + if (now > kctx->endtime) + goto out; + + /* do sequencing checks */ + + ret = GSS_S_BAD_SIG; + if ((ret = krb5_get_seq_num(kctx->seq, ptr + 14, ptr + 6, &direction, + &seqnum))) + goto out; + + if ((kctx->initiate && direction != 0xff) || + (!kctx->initiate && direction != 0)) + goto out; + + /* Copy the data back to the right position. XXX: Would probably be + * better to copy and encrypt at the same time. */ + + blocksize = crypto_tfm_alg_blocksize(kctx->enc); + data_start = ptr + 22 + blocksize; + orig_start = buf->head[0].iov_base + offset; + data_len = (buf->head[0].iov_base + buf->head[0].iov_len) - data_start; + memmove(orig_start, data_start, data_len); + buf->head[0].iov_len -= (data_start - orig_start); + buf->len -= (data_start - orig_start); + + ret = GSS_S_DEFECTIVE_TOKEN; + if (gss_krb5_remove_padding(buf, blocksize)) + goto out; + + ret = GSS_S_COMPLETE; +out: + if (md5cksum.data) kfree(md5cksum.data); + return ret; +} -- GitLab From 00fd6e14255fe7a249315746386d640bc4e9e758 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:55:18 -0400 Subject: [PATCH 0313/1519] RPCSEC_GSS remove all qop parameters Not only are the qop parameters that are passed around throughout the gssapi unused by any currently implemented mechanism, but there appears to be some doubt as to whether they will ever be used. Let's just kill them off for now. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/gss_api.h | 13 ++----------- include/linux/sunrpc/gss_err.h | 10 ---------- include/linux/sunrpc/gss_krb5.h | 8 ++++---- include/linux/sunrpc/gss_spkm3.h | 4 ++-- net/sunrpc/auth_gss/auth_gss.c | 20 +++++++------------- net/sunrpc/auth_gss/gss_krb5_mech.c | 12 ++++-------- net/sunrpc/auth_gss/gss_krb5_seal.c | 5 +---- net/sunrpc/auth_gss/gss_krb5_unseal.c | 5 +---- net/sunrpc/auth_gss/gss_krb5_wrap.c | 11 ++--------- net/sunrpc/auth_gss/gss_mech_switch.c | 14 ++++---------- net/sunrpc/auth_gss/gss_spkm3_mech.c | 21 ++++++++------------- net/sunrpc/auth_gss/gss_spkm3_seal.c | 4 +--- net/sunrpc/auth_gss/gss_spkm3_unseal.c | 2 +- net/sunrpc/auth_gss/svcauth_gss.c | 9 ++++----- 14 files changed, 41 insertions(+), 97 deletions(-) diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h index e896752ffbf9..9b8bcf125c18 100644 --- a/include/linux/sunrpc/gss_api.h +++ b/include/linux/sunrpc/gss_api.h @@ -40,23 +40,19 @@ int gss_import_sec_context( struct gss_ctx **ctx_id); u32 gss_get_mic( struct gss_ctx *ctx_id, - u32 qop, struct xdr_buf *message, struct xdr_netobj *mic_token); u32 gss_verify_mic( struct gss_ctx *ctx_id, struct xdr_buf *message, - struct xdr_netobj *mic_token, - u32 *qstate); + struct xdr_netobj *mic_token); u32 gss_wrap( struct gss_ctx *ctx_id, - u32 qop, int offset, struct xdr_buf *outbuf, struct page **inpages); u32 gss_unwrap( struct gss_ctx *ctx_id, - u32 *qop, int offset, struct xdr_buf *inbuf); u32 gss_delete_sec_context( @@ -67,7 +63,6 @@ char *gss_service_to_auth_domain_name(struct gss_api_mech *, u32 service); struct pf_desc { u32 pseudoflavor; - u32 qop; u32 service; char *name; char *auth_domain_name; @@ -96,23 +91,19 @@ struct gss_api_ops { struct gss_ctx *ctx_id); u32 (*gss_get_mic)( struct gss_ctx *ctx_id, - u32 qop, struct xdr_buf *message, struct xdr_netobj *mic_token); u32 (*gss_verify_mic)( struct gss_ctx *ctx_id, struct xdr_buf *message, - struct xdr_netobj *mic_token, - u32 *qstate); + struct xdr_netobj *mic_token); u32 (*gss_wrap)( struct gss_ctx *ctx_id, - u32 qop, int offset, struct xdr_buf *outbuf, struct page **inpages); u32 (*gss_unwrap)( struct gss_ctx *ctx_id, - u32 *qop, int offset, struct xdr_buf *buf); void (*gss_delete_sec_context)( diff --git a/include/linux/sunrpc/gss_err.h b/include/linux/sunrpc/gss_err.h index 92608a2e574c..a6807867bd21 100644 --- a/include/linux/sunrpc/gss_err.h +++ b/include/linux/sunrpc/gss_err.h @@ -65,16 +65,6 @@ typedef unsigned int OM_uint32; #define GSS_C_MECH_CODE 2 -/* - * Define the default Quality of Protection for per-message services. Note - * that an implementation that offers multiple levels of QOP may either reserve - * a value (for example zero, as assumed here) to mean "default protection", or - * alternatively may simply equate GSS_C_QOP_DEFAULT to a specific explicit - * QOP value. However a value of 0 should always be interpreted by a GSSAPI - * implementation as a request for the default protection level. - */ -#define GSS_C_QOP_DEFAULT 0 - /* * Expiration time of 2^32-1 seconds means infinite lifetime for a * credential or security context diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h index 7f93c2d5ebdb..a7bda4edb853 100644 --- a/include/linux/sunrpc/gss_krb5.h +++ b/include/linux/sunrpc/gss_krb5.h @@ -119,21 +119,21 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, int body_offset, struct xdr_netobj *cksum); u32 -krb5_make_token(struct krb5_ctx *context_handle, int qop_req, +krb5_make_token(struct krb5_ctx *context_handle, struct xdr_buf *input_message_buffer, struct xdr_netobj *output_message_buffer); u32 krb5_read_token(struct krb5_ctx *context_handle, struct xdr_netobj *input_token_buffer, - struct xdr_buf *message_buffer, int *qop_state); + struct xdr_buf *message_buffer); u32 -gss_wrap_kerberos(struct gss_ctx *ctx_id, u32 qop, int offset, +gss_wrap_kerberos(struct gss_ctx *ctx_id, int offset, struct xdr_buf *outbuf, struct page **pages); u32 -gss_unwrap_kerberos(struct gss_ctx *ctx_id, u32 *qop, int offset, +gss_unwrap_kerberos(struct gss_ctx *ctx_id, int offset, struct xdr_buf *buf); diff --git a/include/linux/sunrpc/gss_spkm3.h b/include/linux/sunrpc/gss_spkm3.h index b5c9968c3c17..0beb2cf00a84 100644 --- a/include/linux/sunrpc/gss_spkm3.h +++ b/include/linux/sunrpc/gss_spkm3.h @@ -41,9 +41,9 @@ struct spkm3_ctx { #define SPKM_WRAP_TOK 5 #define SPKM_DEL_TOK 6 -u32 spkm3_make_token(struct spkm3_ctx *ctx, int qop_req, struct xdr_buf * text, struct xdr_netobj * token, int toktype); +u32 spkm3_make_token(struct spkm3_ctx *ctx, struct xdr_buf * text, struct xdr_netobj * token, int toktype); -u32 spkm3_read_token(struct spkm3_ctx *ctx, struct xdr_netobj *read_token, struct xdr_buf *message_buffer, int *qop_state, int toktype); +u32 spkm3_read_token(struct spkm3_ctx *ctx, struct xdr_netobj *read_token, struct xdr_buf *message_buffer, int toktype); #define CKSUMTYPE_RSA_MD5 0x0007 diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 5e4872058ec7..f44f46f1d8e0 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -854,9 +854,7 @@ gss_marshal(struct rpc_task *task, u32 *p) *p++ = htonl(RPC_AUTH_GSS); mic.data = (u8 *)(p + 1); - maj_stat = gss_get_mic(ctx->gc_gss_ctx, - GSS_C_QOP_DEFAULT, - &verf_buf, &mic); + maj_stat = gss_get_mic(ctx->gc_gss_ctx, &verf_buf, &mic); if (maj_stat == GSS_S_CONTEXT_EXPIRED) { cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE; } else if (maj_stat != 0) { @@ -888,7 +886,7 @@ gss_validate(struct rpc_task *task, u32 *p) { struct rpc_cred *cred = task->tk_msg.rpc_cred; struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred); - u32 seq, qop_state; + u32 seq; struct kvec iov; struct xdr_buf verf_buf; struct xdr_netobj mic; @@ -909,7 +907,7 @@ gss_validate(struct rpc_task *task, u32 *p) mic.data = (u8 *)p; mic.len = len; - maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &verf_buf, &mic, &qop_state); + maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &verf_buf, &mic); if (maj_stat == GSS_S_CONTEXT_EXPIRED) cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE; if (maj_stat) @@ -961,8 +959,7 @@ gss_wrap_req_integ(struct rpc_cred *cred, struct gss_cl_ctx *ctx, p = iov->iov_base + iov->iov_len; mic.data = (u8 *)(p + 1); - maj_stat = gss_get_mic(ctx->gc_gss_ctx, - GSS_C_QOP_DEFAULT, &integ_buf, &mic); + maj_stat = gss_get_mic(ctx->gc_gss_ctx, &integ_buf, &mic); status = -EIO; /* XXX? */ if (maj_stat == GSS_S_CONTEXT_EXPIRED) cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE; @@ -1057,8 +1054,7 @@ gss_wrap_req_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx, memcpy(tmp, snd_buf->tail[0].iov_base, snd_buf->tail[0].iov_len); snd_buf->tail[0].iov_base = tmp; } - maj_stat = gss_wrap(ctx->gc_gss_ctx, GSS_C_QOP_DEFAULT, offset, - snd_buf, inpages); + maj_stat = gss_wrap(ctx->gc_gss_ctx, offset, snd_buf, inpages); /* RPC_SLACK_SPACE should prevent this ever happening: */ BUG_ON(snd_buf->len > snd_buf->buflen); status = -EIO; @@ -1150,8 +1146,7 @@ gss_unwrap_resp_integ(struct rpc_cred *cred, struct gss_cl_ctx *ctx, if (xdr_buf_read_netobj(rcv_buf, &mic, mic_offset)) return status; - maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &integ_buf, - &mic, NULL); + maj_stat = gss_verify_mic(ctx->gc_gss_ctx, &integ_buf, &mic); if (maj_stat == GSS_S_CONTEXT_EXPIRED) cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE; if (maj_stat != GSS_S_COMPLETE) @@ -1176,8 +1171,7 @@ gss_unwrap_resp_priv(struct rpc_cred *cred, struct gss_cl_ctx *ctx, /* remove padding: */ rcv_buf->len = offset + opaque_len; - maj_stat = gss_unwrap(ctx->gc_gss_ctx, NULL, - offset, rcv_buf); + maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset, rcv_buf); if (maj_stat == GSS_S_CONTEXT_EXPIRED) cred->cr_flags &= ~RPCAUTH_CRED_UPTODATE; if (maj_stat != GSS_S_COMPLETE) diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index 37a9ad97ccd4..9ffac2c50b94 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -193,15 +193,12 @@ gss_delete_sec_context_kerberos(void *internal_ctx) { static u32 gss_verify_mic_kerberos(struct gss_ctx *ctx, struct xdr_buf *message, - struct xdr_netobj *mic_token, - u32 *qstate) { + struct xdr_netobj *mic_token) +{ u32 maj_stat = 0; - int qop_state; struct krb5_ctx *kctx = ctx->internal_ctx_id; - maj_stat = krb5_read_token(kctx, mic_token, message, &qop_state); - if (!maj_stat && qop_state) - *qstate = qop_state; + maj_stat = krb5_read_token(kctx, mic_token, message); dprintk("RPC: gss_verify_mic_kerberos returning %d\n", maj_stat); return maj_stat; @@ -209,13 +206,12 @@ gss_verify_mic_kerberos(struct gss_ctx *ctx, static u32 gss_get_mic_kerberos(struct gss_ctx *ctx, - u32 qop, struct xdr_buf *message, struct xdr_netobj *mic_token) { u32 err = 0; struct krb5_ctx *kctx = ctx->internal_ctx_id; - err = krb5_make_token(kctx, qop, message, mic_token); + err = krb5_make_token(kctx, message, mic_token); dprintk("RPC: gss_get_mic_kerberos returning %d\n",err); diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c index fb852d9ab06f..15227c727c8b 100644 --- a/net/sunrpc/auth_gss/gss_krb5_seal.c +++ b/net/sunrpc/auth_gss/gss_krb5_seal.c @@ -71,7 +71,7 @@ #endif u32 -krb5_make_token(struct krb5_ctx *ctx, int qop_req, +krb5_make_token(struct krb5_ctx *ctx, struct xdr_buf *text, struct xdr_netobj *token) { s32 checksum_type; @@ -83,9 +83,6 @@ krb5_make_token(struct krb5_ctx *ctx, int qop_req, now = get_seconds(); - if (qop_req != 0) - goto out_err; - switch (ctx->signalg) { case SGN_ALG_DES_MAC_MD5: checksum_type = CKSUMTYPE_RSA_MD5; diff --git a/net/sunrpc/auth_gss/gss_krb5_unseal.c b/net/sunrpc/auth_gss/gss_krb5_unseal.c index c3d6d1bc100c..bcf978627a71 100644 --- a/net/sunrpc/auth_gss/gss_krb5_unseal.c +++ b/net/sunrpc/auth_gss/gss_krb5_unseal.c @@ -74,7 +74,7 @@ u32 krb5_read_token(struct krb5_ctx *ctx, struct xdr_netobj *read_token, - struct xdr_buf *message_buffer, int *qop_state) + struct xdr_buf *message_buffer) { int signalg; int sealalg; @@ -157,9 +157,6 @@ krb5_read_token(struct krb5_ctx *ctx, /* it got through unscathed. Make sure the context is unexpired */ - if (qop_state) - *qop_state = GSS_C_QOP_DEFAULT; - now = get_seconds(); ret = GSS_S_CONTEXT_EXPIRED; diff --git a/net/sunrpc/auth_gss/gss_krb5_wrap.c b/net/sunrpc/auth_gss/gss_krb5_wrap.c index ddcde6e42b23..af777cf9f251 100644 --- a/net/sunrpc/auth_gss/gss_krb5_wrap.c +++ b/net/sunrpc/auth_gss/gss_krb5_wrap.c @@ -116,7 +116,7 @@ make_confounder(char *p, int blocksize) /* XXX factor out common code with seal/unseal. */ u32 -gss_wrap_kerberos(struct gss_ctx *ctx, u32 qop, int offset, +gss_wrap_kerberos(struct gss_ctx *ctx, int offset, struct xdr_buf *buf, struct page **pages) { struct krb5_ctx *kctx = ctx->internal_ctx_id; @@ -132,9 +132,6 @@ gss_wrap_kerberos(struct gss_ctx *ctx, u32 qop, int offset, now = get_seconds(); - if (qop != 0) - goto out_err; - switch (kctx->signalg) { case SGN_ALG_DES_MAC_MD5: checksum_type = CKSUMTYPE_RSA_MD5; @@ -229,8 +226,7 @@ gss_wrap_kerberos(struct gss_ctx *ctx, u32 qop, int offset, } u32 -gss_unwrap_kerberos(struct gss_ctx *ctx, u32 *qop, int offset, - struct xdr_buf *buf) +gss_unwrap_kerberos(struct gss_ctx *ctx, int offset, struct xdr_buf *buf) { struct krb5_ctx *kctx = ctx->internal_ctx_id; int signalg; @@ -328,9 +324,6 @@ gss_unwrap_kerberos(struct gss_ctx *ctx, u32 *qop, int offset, /* it got through unscathed. Make sure the context is unexpired */ - if (qop) - *qop = GSS_C_QOP_DEFAULT; - now = get_seconds(); ret = GSS_S_CONTEXT_EXPIRED; diff --git a/net/sunrpc/auth_gss/gss_mech_switch.c b/net/sunrpc/auth_gss/gss_mech_switch.c index 06d97cb3481a..b048bf672da2 100644 --- a/net/sunrpc/auth_gss/gss_mech_switch.c +++ b/net/sunrpc/auth_gss/gss_mech_switch.c @@ -250,13 +250,11 @@ gss_import_sec_context(const void *input_token, size_t bufsize, u32 gss_get_mic(struct gss_ctx *context_handle, - u32 qop, struct xdr_buf *message, struct xdr_netobj *mic_token) { return context_handle->mech_type->gm_ops ->gss_get_mic(context_handle, - qop, message, mic_token); } @@ -266,35 +264,31 @@ gss_get_mic(struct gss_ctx *context_handle, u32 gss_verify_mic(struct gss_ctx *context_handle, struct xdr_buf *message, - struct xdr_netobj *mic_token, - u32 *qstate) + struct xdr_netobj *mic_token) { return context_handle->mech_type->gm_ops ->gss_verify_mic(context_handle, message, - mic_token, - qstate); + mic_token); } u32 gss_wrap(struct gss_ctx *ctx_id, - u32 qop, int offset, struct xdr_buf *buf, struct page **inpages) { return ctx_id->mech_type->gm_ops - ->gss_wrap(ctx_id, qop, offset, buf, inpages); + ->gss_wrap(ctx_id, offset, buf, inpages); } u32 gss_unwrap(struct gss_ctx *ctx_id, - u32 *qop, int offset, struct xdr_buf *buf) { return ctx_id->mech_type->gm_ops - ->gss_unwrap(ctx_id, qop, offset, buf); + ->gss_unwrap(ctx_id, offset, buf); } diff --git a/net/sunrpc/auth_gss/gss_spkm3_mech.c b/net/sunrpc/auth_gss/gss_spkm3_mech.c index 6c97d61baa9b..39b3edc14694 100644 --- a/net/sunrpc/auth_gss/gss_spkm3_mech.c +++ b/net/sunrpc/auth_gss/gss_spkm3_mech.c @@ -224,18 +224,13 @@ gss_delete_sec_context_spkm3(void *internal_ctx) { static u32 gss_verify_mic_spkm3(struct gss_ctx *ctx, struct xdr_buf *signbuf, - struct xdr_netobj *checksum, - u32 *qstate) { + struct xdr_netobj *checksum) +{ u32 maj_stat = 0; - int qop_state = 0; struct spkm3_ctx *sctx = ctx->internal_ctx_id; dprintk("RPC: gss_verify_mic_spkm3 calling spkm3_read_token\n"); - maj_stat = spkm3_read_token(sctx, checksum, signbuf, &qop_state, - SPKM_MIC_TOK); - - if (!maj_stat && qop_state) - *qstate = qop_state; + maj_stat = spkm3_read_token(sctx, checksum, signbuf, SPKM_MIC_TOK); dprintk("RPC: gss_verify_mic_spkm3 returning %d\n", maj_stat); return maj_stat; @@ -243,15 +238,15 @@ gss_verify_mic_spkm3(struct gss_ctx *ctx, static u32 gss_get_mic_spkm3(struct gss_ctx *ctx, - u32 qop, struct xdr_buf *message_buffer, - struct xdr_netobj *message_token) { + struct xdr_netobj *message_token) +{ u32 err = 0; struct spkm3_ctx *sctx = ctx->internal_ctx_id; dprintk("RPC: gss_get_mic_spkm3\n"); - err = spkm3_make_token(sctx, qop, message_buffer, + err = spkm3_make_token(sctx, message_buffer, message_token, SPKM_MIC_TOK); return err; } @@ -264,8 +259,8 @@ static struct gss_api_ops gss_spkm3_ops = { }; static struct pf_desc gss_spkm3_pfs[] = { - {RPC_AUTH_GSS_SPKM, 0, RPC_GSS_SVC_NONE, "spkm3"}, - {RPC_AUTH_GSS_SPKMI, 0, RPC_GSS_SVC_INTEGRITY, "spkm3i"}, + {RPC_AUTH_GSS_SPKM, RPC_GSS_SVC_NONE, "spkm3"}, + {RPC_AUTH_GSS_SPKMI, RPC_GSS_SVC_INTEGRITY, "spkm3i"}, }; static struct gss_api_mech gss_spkm3_mech = { diff --git a/net/sunrpc/auth_gss/gss_spkm3_seal.c b/net/sunrpc/auth_gss/gss_spkm3_seal.c index 25339868d462..148201e929d0 100644 --- a/net/sunrpc/auth_gss/gss_spkm3_seal.c +++ b/net/sunrpc/auth_gss/gss_spkm3_seal.c @@ -51,7 +51,7 @@ */ u32 -spkm3_make_token(struct spkm3_ctx *ctx, int qop_req, +spkm3_make_token(struct spkm3_ctx *ctx, struct xdr_buf * text, struct xdr_netobj * token, int toktype) { @@ -68,8 +68,6 @@ spkm3_make_token(struct spkm3_ctx *ctx, int qop_req, dprintk("RPC: spkm3_make_token\n"); now = jiffies; - if (qop_req != 0) - goto out_err; if (ctx->ctx_id.len != 16) { dprintk("RPC: spkm3_make_token BAD ctx_id.len %d\n", diff --git a/net/sunrpc/auth_gss/gss_spkm3_unseal.c b/net/sunrpc/auth_gss/gss_spkm3_unseal.c index 65ce81bf0bc4..c3c0d9586103 100644 --- a/net/sunrpc/auth_gss/gss_spkm3_unseal.c +++ b/net/sunrpc/auth_gss/gss_spkm3_unseal.c @@ -52,7 +52,7 @@ u32 spkm3_read_token(struct spkm3_ctx *ctx, struct xdr_netobj *read_token, /* checksum */ struct xdr_buf *message_buffer, /* signbuf */ - int *qop_state, int toktype) + int toktype) { s32 code; struct xdr_netobj wire_cksum = {.len =0, .data = NULL}; diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index e3308195374e..e4ada15ed856 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -566,8 +566,7 @@ gss_verify_header(struct svc_rqst *rqstp, struct rsc *rsci, if (rqstp->rq_deferred) /* skip verification of revisited request */ return SVC_OK; - if (gss_verify_mic(ctx_id, &rpchdr, &checksum, NULL) - != GSS_S_COMPLETE) { + if (gss_verify_mic(ctx_id, &rpchdr, &checksum) != GSS_S_COMPLETE) { *authp = rpcsec_gsserr_credproblem; return SVC_DENIED; } @@ -604,7 +603,7 @@ gss_write_verf(struct svc_rqst *rqstp, struct gss_ctx *ctx_id, u32 seq) xdr_buf_from_iov(&iov, &verf_data); p = rqstp->rq_res.head->iov_base + rqstp->rq_res.head->iov_len; mic.data = (u8 *)(p + 1); - maj_stat = gss_get_mic(ctx_id, 0, &verf_data, &mic); + maj_stat = gss_get_mic(ctx_id, &verf_data, &mic); if (maj_stat != GSS_S_COMPLETE) return -1; *p++ = htonl(mic.len); @@ -710,7 +709,7 @@ unwrap_integ_data(struct xdr_buf *buf, u32 seq, struct gss_ctx *ctx) goto out; if (read_bytes_from_xdr_buf(buf, integ_len + 4, mic.data, mic.len)) goto out; - maj_stat = gss_verify_mic(ctx, &integ_buf, &mic, NULL); + maj_stat = gss_verify_mic(ctx, &integ_buf, &mic); if (maj_stat != GSS_S_COMPLETE) goto out; if (ntohl(svc_getu32(&buf->head[0])) != seq) @@ -1012,7 +1011,7 @@ svcauth_gss_release(struct svc_rqst *rqstp) resv = &resbuf->tail[0]; } mic.data = (u8 *)resv->iov_base + resv->iov_len + 4; - if (gss_get_mic(gsd->rsci->mechctx, 0, &integ_buf, &mic)) + if (gss_get_mic(gsd->rsci->mechctx, &integ_buf, &mic)) goto out_err; svc_putu32(resv, htonl(mic.len)); memset(mic.data + mic.len, 0, -- GitLab From a0857d03b21fa54653c9d2fe7a315381176015b4 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 13 Oct 2005 16:55:23 -0400 Subject: [PATCH 0314/1519] RPCSEC_GSS: krb5 cleanup Remove some senseless wrappers. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/gss_krb5.h | 12 ++++-------- net/sunrpc/auth_gss/gss_krb5_mech.c | 28 --------------------------- net/sunrpc/auth_gss/gss_krb5_seal.c | 5 +++-- net/sunrpc/auth_gss/gss_krb5_unseal.c | 6 +++--- 4 files changed, 10 insertions(+), 41 deletions(-) diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h index a7bda4edb853..2c3601d31045 100644 --- a/include/linux/sunrpc/gss_krb5.h +++ b/include/linux/sunrpc/gss_krb5.h @@ -118,15 +118,11 @@ s32 make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body, int body_offset, struct xdr_netobj *cksum); -u32 -krb5_make_token(struct krb5_ctx *context_handle, - struct xdr_buf *input_message_buffer, - struct xdr_netobj *output_message_buffer); +u32 gss_get_mic_kerberos(struct gss_ctx *, struct xdr_buf *, + struct xdr_netobj *); -u32 -krb5_read_token(struct krb5_ctx *context_handle, - struct xdr_netobj *input_token_buffer, - struct xdr_buf *message_buffer); +u32 gss_verify_mic_kerberos(struct gss_ctx *, struct xdr_buf *, + struct xdr_netobj *); u32 gss_wrap_kerberos(struct gss_ctx *ctx_id, int offset, diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index 9ffac2c50b94..5f1f806a0b11 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -190,34 +190,6 @@ gss_delete_sec_context_kerberos(void *internal_ctx) { kfree(kctx); } -static u32 -gss_verify_mic_kerberos(struct gss_ctx *ctx, - struct xdr_buf *message, - struct xdr_netobj *mic_token) -{ - u32 maj_stat = 0; - struct krb5_ctx *kctx = ctx->internal_ctx_id; - - maj_stat = krb5_read_token(kctx, mic_token, message); - - dprintk("RPC: gss_verify_mic_kerberos returning %d\n", maj_stat); - return maj_stat; -} - -static u32 -gss_get_mic_kerberos(struct gss_ctx *ctx, - struct xdr_buf *message, - struct xdr_netobj *mic_token) { - u32 err = 0; - struct krb5_ctx *kctx = ctx->internal_ctx_id; - - err = krb5_make_token(kctx, message, mic_token); - - dprintk("RPC: gss_get_mic_kerberos returning %d\n",err); - - return err; -} - static struct gss_api_ops gss_kerberos_ops = { .gss_import_sec_context = gss_import_sec_context_kerberos, .gss_get_mic = gss_get_mic_kerberos, diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c index 15227c727c8b..13f8ae979454 100644 --- a/net/sunrpc/auth_gss/gss_krb5_seal.c +++ b/net/sunrpc/auth_gss/gss_krb5_seal.c @@ -71,9 +71,10 @@ #endif u32 -krb5_make_token(struct krb5_ctx *ctx, - struct xdr_buf *text, struct xdr_netobj *token) +gss_get_mic_kerberos(struct gss_ctx *gss_ctx, struct xdr_buf *text, + struct xdr_netobj *token) { + struct krb5_ctx *ctx = gss_ctx->internal_ctx_id; s32 checksum_type; struct xdr_netobj md5cksum = {.len = 0, .data = NULL}; unsigned char *ptr, *krb5_hdr, *msg_start; diff --git a/net/sunrpc/auth_gss/gss_krb5_unseal.c b/net/sunrpc/auth_gss/gss_krb5_unseal.c index bcf978627a71..2030475d98ed 100644 --- a/net/sunrpc/auth_gss/gss_krb5_unseal.c +++ b/net/sunrpc/auth_gss/gss_krb5_unseal.c @@ -72,10 +72,10 @@ * supposedly taken over. */ u32 -krb5_read_token(struct krb5_ctx *ctx, - struct xdr_netobj *read_token, - struct xdr_buf *message_buffer) +gss_verify_mic_kerberos(struct gss_ctx *gss_ctx, + struct xdr_buf *message_buffer, struct xdr_netobj *read_token) { + struct krb5_ctx *ctx = gss_ctx->internal_ctx_id; int signalg; int sealalg; s32 checksum_type; -- GitLab From 5b74eda78db410b979b7d450221c971fdebf5d29 Mon Sep 17 00:00:00 2001 From: Hong Liu Date: Wed, 19 Oct 2005 16:31:34 -0500 Subject: [PATCH 0315/1519] Fixed problem with not being able to decrypt/encrypt broadcast packets. Signed-off-by: James Ketrenos --- net/ieee80211/ieee80211_rx.c | 3 ++- net/ieee80211/ieee80211_tx.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 6b005cb0caa0..ce694cf5c160 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -409,7 +409,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, return 1; } - if (is_multicast_ether_addr(hdr->addr1) ? ieee->host_mc_decrypt : + if ((is_multicast_ether_addr(hdr->addr1) || + is_broadcast_ether_addr(hdr->addr2)) ? ieee->host_mc_decrypt : ieee->host_decrypt) { int idx = 0; if (skb->len >= hdrlen + 3) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 42c50619aa8e..2955b7aa5a38 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -338,7 +338,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) if (host_encrypt || ieee->host_open_frag) { /* Determine fragmentation size based on destination (multicast * and broadcast are not fragmented) */ - if (is_multicast_ether_addr(dest)) + if (is_multicast_ether_addr(dest) || + is_broadcast_ether_addr(dest)) frag_size = MAX_FRAG_THRESHOLD; else frag_size = ieee->fts; -- GitLab From ab7a435a01a9995359a72851ff6896dc110c243f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 18 Oct 2005 21:01:29 +0100 Subject: [PATCH 0316/1519] [PATCH] Remove unused header. mkiss.h has been integrated into mkiss.c earlier. Signed-off-by: Ralf Baechle DL5RB drivers/net/hamradio/mkiss.h | 62 ------------------------------------------- 1 files changed, 62 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.h | 62 ------------------------------------ 1 file changed, 62 deletions(-) delete mode 100644 drivers/net/hamradio/mkiss.h diff --git a/drivers/net/hamradio/mkiss.h b/drivers/net/hamradio/mkiss.h deleted file mode 100644 index 4ab700478598..000000000000 --- a/drivers/net/hamradio/mkiss.h +++ /dev/null @@ -1,62 +0,0 @@ -/**************************************************************************** - * Defines for the Multi-KISS driver. - ****************************************************************************/ - -#define AX25_MAXDEV 16 /* MAX number of AX25 channels; - This can be overridden with - insmod -oax25_maxdev=nnn */ -#define AX_MTU 236 - -/* SLIP/KISS protocol characters. */ -#define END 0300 /* indicates end of frame */ -#define ESC 0333 /* indicates byte stuffing */ -#define ESC_END 0334 /* ESC ESC_END means END 'data' */ -#define ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */ - -struct ax_disp { - int magic; - - /* Various fields. */ - struct tty_struct *tty; /* ptr to TTY structure */ - struct net_device *dev; /* easy for intr handling */ - - /* These are pointers to the malloc()ed frame buffers. */ - unsigned char *rbuff; /* receiver buffer */ - int rcount; /* received chars counter */ - unsigned char *xbuff; /* transmitter buffer */ - unsigned char *xhead; /* pointer to next byte to XMIT */ - int xleft; /* bytes left in XMIT queue */ - - /* SLIP interface statistics. */ - unsigned long rx_packets; /* inbound frames counter */ - unsigned long tx_packets; /* outbound frames counter */ - unsigned long rx_bytes; /* inbound bytes counter */ - unsigned long tx_bytes; /* outbound bytes counter */ - unsigned long rx_errors; /* Parity, etc. errors */ - unsigned long tx_errors; /* Planned stuff */ - unsigned long rx_dropped; /* No memory for skb */ - unsigned long tx_dropped; /* When MTU change */ - unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */ - - /* Detailed SLIP statistics. */ - int mtu; /* Our mtu (to spot changes!) */ - int buffsize; /* Max buffers sizes */ - - - unsigned long flags; /* Flag values/ mode etc */ - /* long req'd: used by set_bit --RR */ -#define AXF_INUSE 0 /* Channel in use */ -#define AXF_ESCAPE 1 /* ESC received */ -#define AXF_ERROR 2 /* Parity, etc. error */ -#define AXF_KEEPTEST 3 /* Keepalive test flag */ -#define AXF_OUTWAIT 4 /* is outpacket was flag */ - - int mode; - int crcmode; /* MW: for FlexNet, SMACK etc. */ -#define CRC_MODE_NONE 0 -#define CRC_MODE_FLEX 1 -#define CRC_MODE_SMACK 2 - spinlock_t buflock; /* lock for rbuf and xbuf */ -}; - -#define AX25_MAGIC 0x5316 -- GitLab From 2039973af59889fea0d14362eae56792cfe8d25a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 19 Oct 2005 15:39:05 +0100 Subject: [PATCH 0317/1519] [PATCH] sb1250-mac: Get rid of all the funny SBMAC_WRITECSR and SBMAC_READCSR macros. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 303 ++++++++++++++++++++--------------------------- 1 files changed, 132 insertions(+), 171 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 303 +++++++++++++++++---------------------- 1 file changed, 132 insertions(+), 171 deletions(-) diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index cb4ea4158457..f7dda6fabe82 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -118,8 +118,6 @@ MODULE_PARM_DESC(int_timeout, "Timeout value"); ********************************************************************* */ -typedef unsigned long sbmac_port_t; - typedef enum { sbmac_speed_auto, sbmac_speed_10, sbmac_speed_100, sbmac_speed_1000 } sbmac_speed_t; @@ -144,10 +142,6 @@ typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, #define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES) -#define SBMAC_READCSR(t) __raw_readq((unsigned long)t) -#define SBMAC_WRITECSR(t,v) __raw_writeq(v, (unsigned long)t) - - #define SBMAC_MAX_TXDESCR 32 #define SBMAC_MAX_RXDESCR 32 @@ -187,11 +181,11 @@ typedef struct sbmacdma_s { int sbdma_int_timeout; /* # usec rx/tx interrupt */ #endif - sbmac_port_t sbdma_config0; /* DMA config register 0 */ - sbmac_port_t sbdma_config1; /* DMA config register 1 */ - sbmac_port_t sbdma_dscrbase; /* Descriptor base address */ - sbmac_port_t sbdma_dscrcnt; /* Descriptor count register */ - sbmac_port_t sbdma_curdscr; /* current descriptor address */ + volatile void __iomem *sbdma_config0; /* DMA config register 0 */ + volatile void __iomem *sbdma_config1; /* DMA config register 1 */ + volatile void __iomem *sbdma_dscrbase; /* Descriptor base address */ + volatile void __iomem *sbdma_dscrcnt; /* Descriptor count register */ + volatile void __iomem *sbdma_curdscr; /* current descriptor address */ /* * This stuff is for maintenance of the ring @@ -236,17 +230,17 @@ struct sbmac_softc { * Controller-specific things */ - unsigned long sbm_base; /* MAC's base address */ + volatile void __iomem *sbm_base; /* MAC's base address */ sbmac_state_t sbm_state; /* current state */ - sbmac_port_t sbm_macenable; /* MAC Enable Register */ - sbmac_port_t sbm_maccfg; /* MAC Configuration Register */ - sbmac_port_t sbm_fifocfg; /* FIFO configuration register */ - sbmac_port_t sbm_framecfg; /* Frame configuration register */ - sbmac_port_t sbm_rxfilter; /* receive filter register */ - sbmac_port_t sbm_isr; /* Interrupt status register */ - sbmac_port_t sbm_imr; /* Interrupt mask register */ - sbmac_port_t sbm_mdio; /* MDIO register */ + volatile void __iomem *sbm_macenable; /* MAC Enable Register */ + volatile void __iomem *sbm_maccfg; /* MAC Configuration Register */ + volatile void __iomem *sbm_fifocfg; /* FIFO configuration register */ + volatile void __iomem *sbm_framecfg; /* Frame configuration register */ + volatile void __iomem *sbm_rxfilter; /* receive filter register */ + volatile void __iomem *sbm_isr; /* Interrupt status register */ + volatile void __iomem *sbm_imr; /* Interrupt mask register */ + volatile void __iomem *sbm_mdio; /* MDIO register */ sbmac_speed_t sbm_speed; /* current speed */ sbmac_duplex_t sbm_duplex; /* current duplex */ @@ -467,15 +461,15 @@ static void sbmac_mii_sync(struct sbmac_softc *s) uint64_t bits; int mac_mdio_genc; - mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC; + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT; - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); for (cnt = 0; cnt < 32; cnt++) { - SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); + __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); } } @@ -498,10 +492,10 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc unsigned int curmask; int mac_mdio_genc; - mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC; + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; bits = M_MAC_MDIO_DIR_OUTPUT; - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); curmask = 1 << (bitcnt - 1); @@ -509,9 +503,9 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc if (data & curmask) bits |= M_MAC_MDIO_OUT; else bits &= ~M_MAC_MDIO_OUT; - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,bits | M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,bits | mac_mdio_genc); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); curmask >>= 1; } } @@ -559,33 +553,31 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) sbmac_mii_senddata(s,phyaddr, 5); sbmac_mii_senddata(s,regidx, 5); - mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC; + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; /* * Switch the port around without a clock transition. */ - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); /* * Send out a clock pulse to signal we want the status */ - SBMAC_WRITECSR(s->sbm_mdio, - M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); /* * If an error occurred, the PHY will signal '1' back */ - error = SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN; + error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN; /* * Issue an 'idle' clock pulse, but keep the direction * the same. */ - SBMAC_WRITECSR(s->sbm_mdio, - M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_INPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); regval = 0; @@ -593,18 +585,16 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) regval <<= 1; if (error == 0) { - if (SBMAC_READCSR(s->sbm_mdio) & M_MAC_MDIO_IN) + if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN) regval |= 1; } - SBMAC_WRITECSR(s->sbm_mdio, - M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc); - SBMAC_WRITECSR(s->sbm_mdio, - M_MAC_MDIO_DIR_INPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); } /* Switch back to output */ - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio); if (error == 0) return regval; @@ -641,9 +631,9 @@ static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx, sbmac_mii_senddata(s,MII_COMMAND_ACK,2); sbmac_mii_senddata(s,regval,16); - mac_mdio_genc = SBMAC_READCSR(s->sbm_mdio) & M_MAC_GENC; + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - SBMAC_WRITECSR(s->sbm_mdio,M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc); + __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio); } @@ -685,48 +675,27 @@ static void sbdma_initctx(sbmacdma_t *d, s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING; #endif - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)), 0); - SBMAC_WRITECSR(IOADDR( - A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)), 0); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR))); + __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR))); /* * initialize register pointers @@ -814,22 +783,19 @@ static void sbdma_channel_start(sbmacdma_t *d, int rxtx ) */ #ifdef CONFIG_SBMAC_COALESCE - SBMAC_WRITECSR(d->sbdma_config1, - V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | - 0); - SBMAC_WRITECSR(d->sbdma_config0, - M_DMA_EOP_INT_EN | + __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | + 0, d->sbdma_config1); + __raw_writeq(M_DMA_EOP_INT_EN | V_DMA_RINGSZ(d->sbdma_maxdescr) | V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) | - 0); + 0, d->sbdma_config0); #else - SBMAC_WRITECSR(d->sbdma_config1,0); - SBMAC_WRITECSR(d->sbdma_config0, - V_DMA_RINGSZ(d->sbdma_maxdescr) | - 0); + __raw_writeq(0, d->sbdma_config1); + __raw_writeq(V_DMA_RINGSZ(d->sbdma_maxdescr) | + 0, d->sbdma_config0); #endif - SBMAC_WRITECSR(d->sbdma_dscrbase,d->sbdma_dscrtable_phys); + __raw_writeq(d->sbdma_dscrtable_phys, d->sbdma_dscrbase); /* * Initialize ring pointers @@ -857,18 +823,18 @@ static void sbdma_channel_stop(sbmacdma_t *d) * Turn off the DMA channel */ - SBMAC_WRITECSR(d->sbdma_config1,0); + __raw_writeq(0, d->sbdma_config1); - SBMAC_WRITECSR(d->sbdma_dscrbase,0); + __raw_writeq(0, d->sbdma_dscrbase); - SBMAC_WRITECSR(d->sbdma_config0,0); + __raw_writeq(0, d->sbdma_config0); /* * Zero ring pointers */ - d->sbdma_addptr = 0; - d->sbdma_remptr = 0; + d->sbdma_addptr = NULL; + d->sbdma_remptr = NULL; } static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) @@ -971,8 +937,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * Do not interrupt per DMA transfer. */ dsc->dscr_a = virt_to_phys(sb_new->data) | - V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | - 0; + V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0; #else dsc->dscr_a = virt_to_phys(sb_new->data) | V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | @@ -998,7 +963,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * Give the buffer to the DMA engine. */ - SBMAC_WRITECSR(d->sbdma_dscrcnt,1); + __raw_writeq(1, d->sbdma_dscrcnt); return 0; /* we did it */ } @@ -1088,7 +1053,7 @@ static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb) * Give the buffer to the DMA engine. */ - SBMAC_WRITECSR(d->sbdma_dscrcnt,1); + __raw_writeq(1, d->sbdma_dscrcnt); return 0; /* we did it */ } @@ -1184,7 +1149,7 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) */ curidx = d->sbdma_remptr - d->sbdma_dscrtable; - hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - + hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); /* @@ -1311,7 +1276,7 @@ static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d) */ curidx = d->sbdma_remptr - d->sbdma_dscrtable; - hwidx = (int) (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - + hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); /* @@ -1467,7 +1432,7 @@ static void sbmac_uninitctx(struct sbmac_softc *sc) static void sbmac_channel_start(struct sbmac_softc *s) { uint64_t reg; - sbmac_port_t port; + volatile void __iomem *port; uint64_t cfg,fifo,framecfg; int idx, th_value; @@ -1482,13 +1447,13 @@ static void sbmac_channel_start(struct sbmac_softc *s) * Bring the controller out of reset, but leave it off. */ - SBMAC_WRITECSR(s->sbm_macenable,0); + __raw_writeq(0, s->sbm_macenable); /* * Ignore all received packets */ - SBMAC_WRITECSR(s->sbm_rxfilter,0); + __raw_writeq(0, s->sbm_rxfilter); /* * Calculate values for various control registers. @@ -1532,7 +1497,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) port = s->sbm_base + R_MAC_HASH_BASE; for (idx = 0; idx < MAC_HASH_COUNT; idx++) { - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); port += sizeof(uint64_t); } @@ -1542,7 +1507,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) port = s->sbm_base + R_MAC_ADDR_BASE; for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); port += sizeof(uint64_t); } @@ -1552,14 +1517,14 @@ static void sbmac_channel_start(struct sbmac_softc *s) port = s->sbm_base + R_MAC_CHUP0_BASE; for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); port += sizeof(uint64_t); } port = s->sbm_base + R_MAC_CHLO0_BASE; for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); port += sizeof(uint64_t); } @@ -1571,7 +1536,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) reg = sbmac_addr2reg(s->sbm_hwaddr); port = s->sbm_base + R_MAC_ADDR_BASE; - SBMAC_WRITECSR(port,reg); + __raw_writeq(reg, port); port = s->sbm_base + R_MAC_ETHERNET_ADDR; #ifdef CONFIG_SB1_PASS_1_WORKAROUNDS @@ -1580,9 +1545,9 @@ static void sbmac_channel_start(struct sbmac_softc *s) * destination address in the R_MAC_ETHERNET_ADDR register. * Set the value to zero. */ - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); #else - SBMAC_WRITECSR(port,reg); + __raw_writeq(reg, port); #endif /* @@ -1590,11 +1555,11 @@ static void sbmac_channel_start(struct sbmac_softc *s) * to the various config registers */ - SBMAC_WRITECSR(s->sbm_rxfilter,0); - SBMAC_WRITECSR(s->sbm_imr,0); - SBMAC_WRITECSR(s->sbm_framecfg,framecfg); - SBMAC_WRITECSR(s->sbm_fifocfg,fifo); - SBMAC_WRITECSR(s->sbm_maccfg,cfg); + __raw_writeq(0, s->sbm_rxfilter); + __raw_writeq(0, s->sbm_imr); + __raw_writeq(framecfg, s->sbm_framecfg); + __raw_writeq(fifo, s->sbm_fifocfg); + __raw_writeq(cfg, s->sbm_maccfg); /* * Initialize DMA channels (rings should be ok now) @@ -1620,11 +1585,10 @@ static void sbmac_channel_start(struct sbmac_softc *s) * Turn on the rest of the bits in the enable register */ - SBMAC_WRITECSR(s->sbm_macenable, - M_MAC_RXDMA_EN0 | + __raw_writeq(M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0 | M_MAC_RX_ENABLE | - M_MAC_TX_ENABLE); + M_MAC_TX_ENABLE, s->sbm_macenable); @@ -1633,23 +1597,21 @@ static void sbmac_channel_start(struct sbmac_softc *s) /* * Accept any TX interrupt and EOP count/timer RX interrupts on ch 0 */ - SBMAC_WRITECSR(s->sbm_imr, - ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | - ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0)); + __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | + ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), s->sbm_imr); #else /* * Accept any kind of interrupt on TX and RX DMA channel 0 */ - SBMAC_WRITECSR(s->sbm_imr, - (M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | - (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)); + __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | + (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr); #endif /* * Enable receiving unicasts and broadcasts */ - SBMAC_WRITECSR(s->sbm_rxfilter,M_MAC_UCAST_EN | M_MAC_BCAST_EN); + __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter); /* * we're running now. @@ -1695,8 +1657,8 @@ static void sbmac_channel_stop(struct sbmac_softc *s) /* don't accept any packets, disable all interrupts */ - SBMAC_WRITECSR(s->sbm_rxfilter,0); - SBMAC_WRITECSR(s->sbm_imr,0); + __raw_writeq(0, s->sbm_rxfilter); + __raw_writeq(0, s->sbm_imr); /* Turn off ticker */ @@ -1704,7 +1666,7 @@ static void sbmac_channel_stop(struct sbmac_softc *s) /* turn off receiver and transmitter */ - SBMAC_WRITECSR(s->sbm_macenable,0); + __raw_writeq(0, s->sbm_macenable); /* We're stopped now. */ @@ -1788,14 +1750,14 @@ static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) return; if (onoff) { - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_ALLPKT_EN; - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); } else { - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_ALLPKT_EN; - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); } } @@ -1816,9 +1778,9 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) uint64_t reg; /* Hard code the off set to 15 for now */ - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15); - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); /* read system identification to determine revision */ if (periph_rev >= 2) { @@ -1897,8 +1859,8 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) * Read current register values */ - cfg = SBMAC_READCSR(s->sbm_maccfg); - framecfg = SBMAC_READCSR(s->sbm_framecfg); + cfg = __raw_readq(s->sbm_maccfg); + framecfg = __raw_readq(s->sbm_framecfg); /* * Mask out the stuff we want to change @@ -1947,8 +1909,8 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) * Send the bits back to the hardware */ - SBMAC_WRITECSR(s->sbm_framecfg,framecfg); - SBMAC_WRITECSR(s->sbm_maccfg,cfg); + __raw_writeq(framecfg, s->sbm_framecfg); + __raw_writeq(cfg, s->sbm_maccfg); return 1; } @@ -1987,7 +1949,7 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc * Read current register values */ - cfg = SBMAC_READCSR(s->sbm_maccfg); + cfg = __raw_readq(s->sbm_maccfg); /* * Mask off the stuff we're about to change @@ -2046,7 +2008,7 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc * Send the bits back to the hardware */ - SBMAC_WRITECSR(s->sbm_maccfg,cfg); + __raw_writeq(cfg, s->sbm_maccfg); return 1; } @@ -2079,7 +2041,7 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) * register, except for counter addr) */ - isr = SBMAC_READCSR(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; + isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; if (isr == 0) break; @@ -2180,7 +2142,7 @@ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) static void sbmac_setmulti(struct sbmac_softc *sc) { uint64_t reg; - sbmac_port_t port; + volatile void __iomem *port; int idx; struct dev_mc_list *mclist; struct net_device *dev = sc->sbm_dev; @@ -2193,30 +2155,30 @@ static void sbmac_setmulti(struct sbmac_softc *sc) for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)); - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); } for (idx = 0; idx < MAC_HASH_COUNT; idx++) { port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t)); - SBMAC_WRITECSR(port,0); + __raw_writeq(0, port); } /* * Clear the filter to say we don't want any multicasts. */ - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); if (dev->flags & IFF_ALLMULTI) { /* * Enable ALL multicasts. Do this by inverting the * multicast enable bit. */ - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); return; } @@ -2235,7 +2197,7 @@ static void sbmac_setmulti(struct sbmac_softc *sc) while (mclist && (idx < MAC_ADDR_COUNT)) { reg = sbmac_addr2reg(mclist->dmi_addr); port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t)); - SBMAC_WRITECSR(port,reg); + __raw_writeq(reg, port); idx++; mclist = mclist->next; } @@ -2246,9 +2208,9 @@ static void sbmac_setmulti(struct sbmac_softc *sc) */ if (idx > 1) { - reg = SBMAC_READCSR(sc->sbm_rxfilter); + reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_MCAST_EN; - SBMAC_WRITECSR(sc->sbm_rxfilter,reg); + __raw_writeq(reg, sc->sbm_rxfilter); } } @@ -2377,8 +2339,8 @@ static int sbmac_init(struct net_device *dev, int idx) * for us in the ethernet address register for each mac. */ - ea_reg = SBMAC_READCSR(sc->sbm_base + R_MAC_ETHERNET_ADDR); - SBMAC_WRITECSR(sc->sbm_base + R_MAC_ETHERNET_ADDR, 0); + ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR); + __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR); for (i = 0; i < 6; i++) { eaddr[i] = (uint8_t) (ea_reg & 0xFF); ea_reg >>= 8; @@ -2465,7 +2427,7 @@ static int sbmac_open(struct net_device *dev) * yet) */ - SBMAC_READCSR(sc->sbm_isr); + __raw_readq(sc->sbm_isr); if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev)) return -EBUSY; @@ -2800,13 +2762,13 @@ sbmac_setup_hwaddr(int chan,char *addr) { uint8_t eaddr[6]; uint64_t val; - sbmac_port_t port; + unsigned long port; port = A_MAC_CHANNEL_BASE(chan); sbmac_parse_hwaddr(addr,eaddr); val = sbmac_addr2reg(eaddr); - SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR),val); - val = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR)); + __raw_writeq(val, IOADDR(port+R_MAC_ETHERNET_ADDR)); + val = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR)); } #endif @@ -2817,7 +2779,7 @@ sbmac_init_module(void) { int idx; struct net_device *dev; - sbmac_port_t port; + unsigned long port; int chip_max_units; /* @@ -2871,7 +2833,7 @@ sbmac_init_module(void) * If we find a zero, skip this MAC. */ - sbmac_orig_hwaddr[idx] = SBMAC_READCSR(IOADDR(port+R_MAC_ETHERNET_ADDR)); + sbmac_orig_hwaddr[idx] = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR)); if (sbmac_orig_hwaddr[idx] == 0) { printk(KERN_DEBUG "sbmac: not configuring MAC at " "%lx\n", port); @@ -2893,8 +2855,7 @@ sbmac_init_module(void) dev->mem_end = 0; if (sbmac_init(dev, idx)) { port = A_MAC_CHANNEL_BASE(idx); - SBMAC_WRITECSR(IOADDR(port+R_MAC_ETHERNET_ADDR), - sbmac_orig_hwaddr[idx]); + __raw_writeq(sbmac_orig_hwaddr[idx], IOADDR(port+R_MAC_ETHERNET_ADDR)); free_netdev(dev); continue; } -- GitLab From 74b0247fbd4b6ed1693a420d85cf50267d840ef4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 19 Oct 2005 15:40:02 +0100 Subject: [PATCH 0318/1519] [PATCH] sb1250-mac: Whitespace cleanup. Signed-off-by: Ralf Baechle drivers/net/sb1250-mac.c | 1030 +++++++++++++++++++++++------------------------ 1 files changed, 515 insertions(+), 515 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 1030 +++++++++++++++++++------------------- 1 file changed, 515 insertions(+), 515 deletions(-) diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index f7dda6fabe82..d4c8ecdfa4a7 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -10,7 +10,7 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. @@ -127,7 +127,7 @@ typedef enum { sbmac_duplex_auto, sbmac_duplex_half, typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame, sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t; -typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, +typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, sbmac_state_broken } sbmac_state_t; @@ -147,8 +147,8 @@ typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, #define ETHER_ALIGN 2 #define ETHER_ADDR_LEN 6 -#define ENET_PACKET_SIZE 1518 -/*#define ENET_PACKET_SIZE 9216 */ +#define ENET_PACKET_SIZE 1518 +/*#define ENET_PACKET_SIZE 9216 */ /********************************************************************** * DMA Descriptor structure @@ -166,12 +166,12 @@ typedef unsigned long paddr_t; ********************************************************************* */ typedef struct sbmacdma_s { - - /* + + /* * This stuff is used to identify the channel and the registers * associated with it. */ - + struct sbmac_softc *sbdma_eth; /* back pointer to associated MAC */ int sbdma_channel; /* channel number */ int sbdma_txdir; /* direction (1=transmit) */ @@ -186,16 +186,16 @@ typedef struct sbmacdma_s { volatile void __iomem *sbdma_dscrbase; /* Descriptor base address */ volatile void __iomem *sbdma_dscrcnt; /* Descriptor count register */ volatile void __iomem *sbdma_curdscr; /* current descriptor address */ - + /* * This stuff is for maintenance of the ring */ - + sbdmadscr_t *sbdma_dscrtable; /* base of descriptor table */ sbdmadscr_t *sbdma_dscrtable_end; /* end of descriptor table */ - + struct sk_buff **sbdma_ctxtable; /* context table, one per descr */ - + paddr_t sbdma_dscrtable_phys; /* and also the phys addr */ sbdmadscr_t *sbdma_addptr; /* next dscr for sw to add */ sbdmadscr_t *sbdma_remptr; /* next dscr for sw to remove */ @@ -207,15 +207,15 @@ typedef struct sbmacdma_s { ********************************************************************* */ struct sbmac_softc { - + /* * Linux-specific things */ - + struct net_device *sbm_dev; /* pointer to linux device */ spinlock_t sbm_lock; /* spin lock */ struct timer_list sbm_timer; /* for monitoring MII */ - struct net_device_stats sbm_stats; + struct net_device_stats sbm_stats; int sbm_devflags; /* current device flags */ int sbm_phy_oldbmsr; @@ -223,16 +223,16 @@ struct sbmac_softc { int sbm_phy_oldk1stsr; int sbm_phy_oldlinkstat; int sbm_buffersize; - + unsigned char sbm_phys[2]; - + /* * Controller-specific things */ - + volatile void __iomem *sbm_base; /* MAC's base address */ sbmac_state_t sbm_state; /* current state */ - + volatile void __iomem *sbm_macenable; /* MAC Enable Register */ volatile void __iomem *sbm_maccfg; /* MAC Configuration Register */ volatile void __iomem *sbm_fifocfg; /* FIFO configuration register */ @@ -241,13 +241,13 @@ struct sbmac_softc { volatile void __iomem *sbm_isr; /* Interrupt status register */ volatile void __iomem *sbm_imr; /* Interrupt mask register */ volatile void __iomem *sbm_mdio; /* MDIO register */ - + sbmac_speed_t sbm_speed; /* current speed */ sbmac_duplex_t sbm_duplex; /* current duplex */ sbmac_fc_t sbm_fc; /* current flow control setting */ - + unsigned char sbm_hwaddr[ETHER_ADDR_LEN]; - + sbmacdma_t sbm_txdma; /* for now, only use channel 0 */ sbmacdma_t sbm_rxdma; int rx_hw_checksum; @@ -444,13 +444,13 @@ static uint64_t sbmac_orig_hwaddr[MAX_UNITS]; /********************************************************************** * SBMAC_MII_SYNC(s) - * + * * Synchronize with the MII - send a pattern of bits to the MII * that will guarantee that it is ready to accept a command. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -462,11 +462,11 @@ static void sbmac_mii_sync(struct sbmac_softc *s) int mac_mdio_genc; mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - + bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT; - + __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); - + for (cnt = 0; cnt < 32; cnt++) { __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); @@ -475,11 +475,11 @@ static void sbmac_mii_sync(struct sbmac_softc *s) /********************************************************************** * SBMAC_MII_SENDDATA(s,data,bitcnt) - * + * * Send some bits to the MII. The bits to be sent are right- * justified in the 'data' parameter. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * data - data to send * bitcnt - number of bits to send @@ -493,12 +493,12 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc int mac_mdio_genc; mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - + bits = M_MAC_MDIO_DIR_OUTPUT; __raw_writeq(bits | mac_mdio_genc, s->sbm_mdio); - + curmask = 1 << (bitcnt - 1); - + for (i = 0; i < bitcnt; i++) { if (data & curmask) bits |= M_MAC_MDIO_OUT; @@ -514,14 +514,14 @@ static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitc /********************************************************************** * SBMAC_MII_READ(s,phyaddr,regidx) - * + * * Read a PHY register. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * phyaddr - PHY's address * regidx = index of register to read - * + * * Return value: * value read, or 0 if an error occurred. ********************************************************************* */ @@ -537,9 +537,9 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) * Synchronize ourselves so that the PHY knows the next * thing coming down is a command */ - + sbmac_mii_sync(s); - + /* * Send the data to the PHY. The sequence is * a "start" command (2 bits) @@ -547,55 +547,55 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) * the PHY addr (5 bits) * the register index (5 bits) */ - + sbmac_mii_senddata(s,MII_COMMAND_START, 2); sbmac_mii_senddata(s,MII_COMMAND_READ, 2); sbmac_mii_senddata(s,phyaddr, 5); sbmac_mii_senddata(s,regidx, 5); - + mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC; - - /* + + /* * Switch the port around without a clock transition. */ __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - + /* * Send out a clock pulse to signal we want the status */ - + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - - /* + + /* * If an error occurred, the PHY will signal '1' back */ error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN; - - /* + + /* * Issue an 'idle' clock pulse, but keep the direction * the same. */ __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); - + regval = 0; - + for (idx = 0; idx < 16; idx++) { regval <<= 1; - + if (error == 0) { if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN) regval |= 1; } - + __raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio); __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio); } - + /* Switch back to output */ __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio); - + if (error == 0) return regval; return 0; @@ -604,15 +604,15 @@ static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx) /********************************************************************** * SBMAC_MII_WRITE(s,phyaddr,regidx,regval) - * + * * Write a value to a PHY register. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * phyaddr - PHY to use * regidx - register within the PHY * regval - data to write to register - * + * * Return value: * nothing ********************************************************************* */ @@ -623,7 +623,7 @@ static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx, int mac_mdio_genc; sbmac_mii_sync(s); - + sbmac_mii_senddata(s,MII_COMMAND_START,2); sbmac_mii_senddata(s,MII_COMMAND_WRITE,2); sbmac_mii_senddata(s,phyaddr, 5); @@ -640,18 +640,18 @@ static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx, /********************************************************************** * SBDMA_INITCTX(d,s,chan,txrx,maxdescr) - * + * * Initialize a DMA channel context. Since there are potentially * eight DMA channels per MAC, it's nice to do this in a standard - * way. - * - * Input parameters: + * way. + * + * Input parameters: * d - sbmacdma_t structure (DMA channel context) * s - sbmac_softc structure (pointer to a MAC) * chan - channel number (0..1 right now) * txrx - Identifies DMA_TX or DMA_RX for channel direction * maxdescr - number of descriptors - * + * * Return value: * nothing ********************************************************************* */ @@ -662,14 +662,14 @@ static void sbdma_initctx(sbmacdma_t *d, int txrx, int maxdescr) { - /* - * Save away interesting stuff in the structure + /* + * Save away interesting stuff in the structure */ - + d->sbdma_eth = s; d->sbdma_channel = chan; d->sbdma_txdir = txrx; - + #if 0 /* RMON clearing */ s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING; @@ -697,28 +697,28 @@ static void sbdma_initctx(sbmacdma_t *d, __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR))); __raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR))); - /* - * initialize register pointers + /* + * initialize register pointers */ - - d->sbdma_config0 = + + d->sbdma_config0 = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0); - d->sbdma_config1 = + d->sbdma_config1 = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1); - d->sbdma_dscrbase = + d->sbdma_dscrbase = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE); - d->sbdma_dscrcnt = + d->sbdma_dscrcnt = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT); - d->sbdma_curdscr = + d->sbdma_curdscr = s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR); - + /* * Allocate memory for the ring */ - + d->sbdma_maxdescr = maxdescr; - - d->sbdma_dscrtable = (sbdmadscr_t *) + + d->sbdma_dscrtable = (sbdmadscr_t *) kmalloc((d->sbdma_maxdescr+1)*sizeof(sbdmadscr_t), GFP_KERNEL); /* @@ -727,22 +727,22 @@ static void sbdma_initctx(sbmacdma_t *d, */ d->sbdma_dscrtable = (sbdmadscr_t *) ALIGN((unsigned long)d->sbdma_dscrtable, sizeof(sbdmadscr_t)); - + memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t)); - + d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr; - + d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable); - + /* * And context table */ - - d->sbdma_ctxtable = (struct sk_buff **) + + d->sbdma_ctxtable = (struct sk_buff **) kmalloc(d->sbdma_maxdescr*sizeof(struct sk_buff *), GFP_KERNEL); - + memset(d->sbdma_ctxtable,0,d->sbdma_maxdescr*sizeof(struct sk_buff *)); - + #ifdef CONFIG_SBMAC_COALESCE /* * Setup Rx/Tx DMA coalescing defaults @@ -753,7 +753,7 @@ static void sbdma_initctx(sbmacdma_t *d, } else { d->sbdma_int_pktcnt = 1; } - + if ( int_timeout ) { d->sbdma_int_timeout = int_timeout; } else { @@ -765,13 +765,13 @@ static void sbdma_initctx(sbmacdma_t *d, /********************************************************************** * SBDMA_CHANNEL_START(d) - * + * * Initialize the hardware registers for a DMA channel. - * - * Input parameters: + * + * Input parameters: * d - DMA channel to init (context must be previously init'd * rxtx - DMA_RX or DMA_TX depending on what type of channel - * + * * Return value: * nothing ********************************************************************* */ @@ -781,7 +781,7 @@ static void sbdma_channel_start(sbmacdma_t *d, int rxtx ) /* * Turn on the DMA channel */ - + #ifdef CONFIG_SBMAC_COALESCE __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | 0, d->sbdma_config1); @@ -807,12 +807,12 @@ static void sbdma_channel_start(sbmacdma_t *d, int rxtx ) /********************************************************************** * SBDMA_CHANNEL_STOP(d) - * + * * Initialize the hardware registers for a DMA channel. - * - * Input parameters: + * + * Input parameters: * d - DMA channel to init (context must be previously init'd - * + * * Return value: * nothing ********************************************************************* */ @@ -822,17 +822,17 @@ static void sbdma_channel_stop(sbmacdma_t *d) /* * Turn off the DMA channel */ - + __raw_writeq(0, d->sbdma_config1); - + __raw_writeq(0, d->sbdma_dscrbase); - + __raw_writeq(0, d->sbdma_config0); - + /* * Zero ring pointers */ - + d->sbdma_addptr = NULL; d->sbdma_remptr = NULL; } @@ -841,25 +841,25 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) { unsigned long addr; unsigned long newaddr; - + addr = (unsigned long) skb->data; - + newaddr = (addr + power2 - 1) & ~(power2 - 1); - + skb_reserve(skb,newaddr-addr+offset); } /********************************************************************** * SBDMA_ADD_RCVBUFFER(d,sb) - * + * * Add a buffer to the specified DMA channel. For receive channels, * this queues a buffer for inbound packets. - * - * Input parameters: + * + * Input parameters: * d - DMA channel descriptor * sb - sk_buff to add, or NULL if we should allocate one - * + * * Return value: * 0 if buffer could not be added (ring is full) * 1 if buffer added successfully @@ -872,24 +872,24 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) sbdmadscr_t *nextdsc; struct sk_buff *sb_new = NULL; int pktsize = ENET_PACKET_SIZE; - + /* get pointer to our current place in the ring */ - + dsc = d->sbdma_addptr; nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); - + /* * figure out if the ring is full - if the next descriptor * is the same as the one that we're going to remove from * the ring, the ring is full */ - + if (nextdsc == d->sbdma_remptr) { return -ENOSPC; } - /* - * Allocate a sk_buff if we don't already have one. + /* + * Allocate a sk_buff if we don't already have one. * If we do have an sk_buff, reset it so that it's empty. * * Note: sk_buffs don't seem to be guaranteed to have any sort @@ -898,7 +898,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * * 1. the data does not start in the middle of a cache line. * 2. The data does not end in the middle of a cache line - * 3. The buffer can be aligned such that the IP addresses are + * 3. The buffer can be aligned such that the IP addresses are * naturally aligned. * * Remember, the SOCs MAC writes whole cache lines at a time, @@ -906,7 +906,7 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) * data portion starts in the middle of a cache line, the SOC * DMA will trash the beginning (and ending) portions. */ - + if (sb == NULL) { sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN); if (sb_new == NULL) { @@ -922,16 +922,16 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) } else { sb_new = sb; - /* + /* * nothing special to reinit buffer, it's already aligned * and sb->data already points to a good place. */ } - + /* - * fill in the descriptor + * fill in the descriptor */ - + #ifdef CONFIG_SBMAC_COALESCE /* * Do not interrupt per DMA transfer. @@ -946,38 +946,38 @@ static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb) /* receiving: no options */ dsc->dscr_b = 0; - + /* - * fill in the context + * fill in the context */ - + d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new; - - /* - * point at next packet + + /* + * point at next packet */ - + d->sbdma_addptr = nextdsc; - - /* + + /* * Give the buffer to the DMA engine. */ - + __raw_writeq(1, d->sbdma_dscrcnt); - + return 0; /* we did it */ } /********************************************************************** * SBDMA_ADD_TXBUFFER(d,sb) - * + * * Add a transmit buffer to the specified DMA channel, causing a * transmit to start. - * - * Input parameters: + * + * Input parameters: * d - DMA channel descriptor * sb - sk_buff to add - * + * * Return value: * 0 transmit queued successfully * otherwise error code @@ -991,70 +991,70 @@ static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb) uint64_t phys; uint64_t ncb; int length; - + /* get pointer to our current place in the ring */ - + dsc = d->sbdma_addptr; nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); - + /* * figure out if the ring is full - if the next descriptor * is the same as the one that we're going to remove from * the ring, the ring is full */ - + if (nextdsc == d->sbdma_remptr) { return -ENOSPC; } - + /* * Under Linux, it's not necessary to copy/coalesce buffers * like it is on NetBSD. We think they're all contiguous, * but that may not be true for GBE. */ - + length = sb->len; - + /* * fill in the descriptor. Note that the number of cache * blocks in the descriptor is the number of blocks * *spanned*, so we need to add in the offset (if any) * while doing the calculation. */ - + phys = virt_to_phys(sb->data); ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1))); - dsc->dscr_a = phys | + dsc->dscr_a = phys | V_DMA_DSCRA_A_SIZE(ncb) | #ifndef CONFIG_SBMAC_COALESCE M_DMA_DSCRA_INTERRUPT | #endif M_DMA_ETHTX_SOP; - + /* transmitting: set outbound options and length */ dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) | V_DMA_DSCRB_PKT_SIZE(length); - + /* - * fill in the context + * fill in the context */ - + d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb; - - /* - * point at next packet + + /* + * point at next packet */ - + d->sbdma_addptr = nextdsc; - - /* + + /* * Give the buffer to the DMA engine. */ - + __raw_writeq(1, d->sbdma_dscrcnt); - + return 0; /* we did it */ } @@ -1063,12 +1063,12 @@ static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb) /********************************************************************** * SBDMA_EMPTYRING(d) - * + * * Free all allocated sk_buffs on the specified DMA channel; - * - * Input parameters: + * + * Input parameters: * d - DMA channel - * + * * Return value: * nothing ********************************************************************* */ @@ -1077,7 +1077,7 @@ static void sbdma_emptyring(sbmacdma_t *d) { int idx; struct sk_buff *sb; - + for (idx = 0; idx < d->sbdma_maxdescr; idx++) { sb = d->sbdma_ctxtable[idx]; if (sb) { @@ -1090,13 +1090,13 @@ static void sbdma_emptyring(sbmacdma_t *d) /********************************************************************** * SBDMA_FILLRING(d) - * + * * Fill the specified DMA channel (must be receive channel) * with sk_buffs - * - * Input parameters: + * + * Input parameters: * d - DMA channel - * + * * Return value: * nothing ********************************************************************* */ @@ -1104,7 +1104,7 @@ static void sbdma_emptyring(sbmacdma_t *d) static void sbdma_fillring(sbmacdma_t *d) { int idx; - + for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) { if (sbdma_add_rcvbuffer(d,NULL) != 0) break; @@ -1114,16 +1114,16 @@ static void sbdma_fillring(sbmacdma_t *d) /********************************************************************** * SBDMA_RX_PROCESS(sc,d) - * - * Process "completed" receive buffers on the specified DMA channel. + * + * Process "completed" receive buffers on the specified DMA channel. * Note that this isn't really ideal for priority channels, since - * it processes all of the packets on a given channel before - * returning. + * it processes all of the packets on a given channel before + * returning. * - * Input parameters: + * Input parameters: * sc - softc structure * d - DMA channel context - * + * * Return value: * nothing ********************************************************************* */ @@ -1135,56 +1135,56 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sbdmadscr_t *dsc; struct sk_buff *sb; int len; - + for (;;) { - /* + /* * figure out where we are (as an index) and where * the hardware is (also as an index) * - * This could be done faster if (for example) the + * This could be done faster if (for example) the * descriptor table was page-aligned and contiguous in * both virtual and physical memory -- you could then * just compare the low-order bits of the virtual address * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) */ - + curidx = d->sbdma_remptr - d->sbdma_dscrtable; hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); - + /* * If they're the same, that means we've processed all * of the descriptors up to (but not including) the one that * the hardware is working on right now. */ - + if (curidx == hwidx) break; - + /* * Otherwise, get the packet's sk_buff ptr back */ - + dsc = &(d->sbdma_dscrtable[curidx]); sb = d->sbdma_ctxtable[curidx]; d->sbdma_ctxtable[curidx] = NULL; - + len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4; - + /* * Check packet status. If good, process it. * If not, silently drop it and put it back on the * receive ring. */ - + if (!(dsc->dscr_a & M_DMA_ETHRX_BAD)) { - + /* * Add a new buffer to replace the old one. If we fail * to allocate a buffer, we're going to drop this * packet and put it right back on the receive ring. */ - + if (sbdma_add_rcvbuffer(d,NULL) == -ENOBUFS) { sc->sbm_stats.rx_dropped++; sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */ @@ -1193,7 +1193,7 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) * Set length into the packet */ skb_put(sb,len); - + /* * Buffer has been replaced on the * receive ring. Pass the buffer to @@ -1212,7 +1212,7 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sb->ip_summed = CHECKSUM_NONE; } } - + netif_rx(sb); } } else { @@ -1223,14 +1223,14 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) sc->sbm_stats.rx_errors++; sbdma_add_rcvbuffer(d,sb); } - - - /* + + + /* * .. and advance to the next buffer. */ - + d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); - + } } @@ -1238,17 +1238,17 @@ static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d) /********************************************************************** * SBDMA_TX_PROCESS(sc,d) - * - * Process "completed" transmit buffers on the specified DMA channel. + * + * Process "completed" transmit buffers on the specified DMA channel. * This is normally called within the interrupt service routine. * Note that this isn't really ideal for priority channels, since - * it processes all of the packets on a given channel before - * returning. + * it processes all of the packets on a given channel before + * returning. * - * Input parameters: + * Input parameters: * sc - softc structure * d - DMA channel context - * + * * Return value: * nothing ********************************************************************* */ @@ -1262,19 +1262,19 @@ static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d) unsigned long flags; spin_lock_irqsave(&(sc->sbm_lock), flags); - + for (;;) { - /* + /* * figure out where we are (as an index) and where * the hardware is (also as an index) * - * This could be done faster if (for example) the + * This could be done faster if (for example) the * descriptor table was page-aligned and contiguous in * both virtual and physical memory -- you could then * just compare the low-order bits of the virtual address * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) */ - + curidx = d->sbdma_remptr - d->sbdma_dscrtable; hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); @@ -1284,75 +1284,75 @@ static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d) * of the descriptors up to (but not including) the one that * the hardware is working on right now. */ - + if (curidx == hwidx) break; - + /* * Otherwise, get the packet's sk_buff ptr back */ - + dsc = &(d->sbdma_dscrtable[curidx]); sb = d->sbdma_ctxtable[curidx]; d->sbdma_ctxtable[curidx] = NULL; - + /* * Stats */ - + sc->sbm_stats.tx_bytes += sb->len; sc->sbm_stats.tx_packets++; - + /* * for transmits, we just free buffers. */ - + dev_kfree_skb_irq(sb); - - /* + + /* * .. and advance to the next buffer. */ d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); - + } - + /* * Decide if we should wake up the protocol or not. * Other drivers seem to do this when we reach a low * watermark on the transmit queue. */ - + netif_wake_queue(d->sbdma_eth->sbm_dev); - + spin_unlock_irqrestore(&(sc->sbm_lock), flags); - + } /********************************************************************** * SBMAC_INITCTX(s) - * + * * Initialize an Ethernet context structure - this is called * once per MAC on the 1250. Memory is allocated here, so don't * call it again from inside the ioctl routines that bring the * interface up/down - * - * Input parameters: + * + * Input parameters: * s - sbmac context structure - * + * * Return value: * 0 ********************************************************************* */ static int sbmac_initctx(struct sbmac_softc *s) { - - /* - * figure out the addresses of some ports + + /* + * figure out the addresses of some ports */ - + s->sbm_macenable = s->sbm_base + R_MAC_ENABLE; s->sbm_maccfg = s->sbm_base + R_MAC_CFG; s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG; @@ -1369,29 +1369,29 @@ static int sbmac_initctx(struct sbmac_softc *s) s->sbm_phy_oldanlpar = 0; s->sbm_phy_oldk1stsr = 0; s->sbm_phy_oldlinkstat = 0; - + /* * Initialize the DMA channels. Right now, only one per MAC is used * Note: Only do this _once_, as it allocates memory from the kernel! */ - + sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR); sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR); - + /* * initial state is OFF */ - + s->sbm_state = sbmac_state_off; - + /* * Initial speed is (XXX TEMP) 10MBit/s HDX no FC */ - + s->sbm_speed = sbmac_speed_10; s->sbm_duplex = sbmac_duplex_half; s->sbm_fc = sbmac_fc_disabled; - + return 0; } @@ -1402,7 +1402,7 @@ static void sbdma_uninitctx(struct sbmacdma_s *d) kfree(d->sbdma_dscrtable); d->sbdma_dscrtable = NULL; } - + if (d->sbdma_ctxtable) { kfree(d->sbdma_ctxtable); d->sbdma_ctxtable = NULL; @@ -1419,12 +1419,12 @@ static void sbmac_uninitctx(struct sbmac_softc *sc) /********************************************************************** * SBMAC_CHANNEL_START(s) - * + * * Start packet processing on this MAC. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -1435,46 +1435,46 @@ static void sbmac_channel_start(struct sbmac_softc *s) volatile void __iomem *port; uint64_t cfg,fifo,framecfg; int idx, th_value; - + /* * Don't do this if running */ if (s->sbm_state == sbmac_state_on) return; - + /* * Bring the controller out of reset, but leave it off. */ - + __raw_writeq(0, s->sbm_macenable); - + /* * Ignore all received packets */ - + __raw_writeq(0, s->sbm_rxfilter); - - /* + + /* * Calculate values for various control registers. */ - + cfg = M_MAC_RETRY_EN | - M_MAC_TX_HOLD_SOP_EN | + M_MAC_TX_HOLD_SOP_EN | V_MAC_TX_PAUSE_CNT_16K | M_MAC_AP_STAT_EN | M_MAC_FAST_SYNC | M_MAC_SS_EN | 0; - - /* + + /* * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above * Use a larger RD_THRSH for gigabit */ - if (periph_rev >= 2) + if (periph_rev >= 2) th_value = 64; - else + else th_value = 28; fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */ @@ -1492,29 +1492,29 @@ static void sbmac_channel_start(struct sbmac_softc *s) V_MAC_BACKOFF_SEL(1); /* - * Clear out the hash address map + * Clear out the hash address map */ - + port = s->sbm_base + R_MAC_HASH_BASE; for (idx = 0; idx < MAC_HASH_COUNT; idx++) { __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Clear out the exact-match table */ - + port = s->sbm_base + R_MAC_ADDR_BASE; for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Clear out the DMA Channel mapping table registers */ - + port = s->sbm_base + R_MAC_CHUP0_BASE; for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { __raw_writeq(0, port); @@ -1527,14 +1527,14 @@ static void sbmac_channel_start(struct sbmac_softc *s) __raw_writeq(0, port); port += sizeof(uint64_t); } - + /* * Program the hardware address. It goes into the hardware-address * register as well as the first filter register. */ - + reg = sbmac_addr2reg(s->sbm_hwaddr); - + port = s->sbm_base + R_MAC_ADDR_BASE; __raw_writeq(reg, port); port = s->sbm_base + R_MAC_ETHERNET_ADDR; @@ -1549,48 +1549,48 @@ static void sbmac_channel_start(struct sbmac_softc *s) #else __raw_writeq(reg, port); #endif - + /* * Set the receive filter for no packets, and write values * to the various config registers */ - + __raw_writeq(0, s->sbm_rxfilter); __raw_writeq(0, s->sbm_imr); __raw_writeq(framecfg, s->sbm_framecfg); __raw_writeq(fifo, s->sbm_fifocfg); __raw_writeq(cfg, s->sbm_maccfg); - + /* * Initialize DMA channels (rings should be ok now) */ - + sbdma_channel_start(&(s->sbm_rxdma), DMA_RX); sbdma_channel_start(&(s->sbm_txdma), DMA_TX); - + /* * Configure the speed, duplex, and flow control */ sbmac_set_speed(s,s->sbm_speed); sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc); - + /* * Fill the receive ring */ - + sbdma_fillring(&(s->sbm_rxdma)); - - /* + + /* * Turn on the rest of the bits in the enable register - */ - + */ + __raw_writeq(M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0 | M_MAC_RX_ENABLE | M_MAC_TX_ENABLE, s->sbm_macenable); - - + + #ifdef CONFIG_SBMAC_COALESCE @@ -1606,44 +1606,44 @@ static void sbmac_channel_start(struct sbmac_softc *s) __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr); #endif - - /* - * Enable receiving unicasts and broadcasts + + /* + * Enable receiving unicasts and broadcasts */ - + __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter); - + /* - * we're running now. + * we're running now. */ - + s->sbm_state = sbmac_state_on; - - /* - * Program multicast addresses + + /* + * Program multicast addresses */ - + sbmac_setmulti(s); - - /* - * If channel was in promiscuous mode before, turn that on + + /* + * If channel was in promiscuous mode before, turn that on */ - + if (s->sbm_devflags & IFF_PROMISC) { sbmac_promiscuous_mode(s,1); } - + } /********************************************************************** * SBMAC_CHANNEL_STOP(s) - * + * * Stop packet processing on this MAC. - * - * Input parameters: + * + * Input parameters: * s - sbmac structure - * + * * Return value: * nothing ********************************************************************* */ @@ -1651,49 +1651,49 @@ static void sbmac_channel_start(struct sbmac_softc *s) static void sbmac_channel_stop(struct sbmac_softc *s) { /* don't do this if already stopped */ - + if (s->sbm_state == sbmac_state_off) return; - + /* don't accept any packets, disable all interrupts */ - + __raw_writeq(0, s->sbm_rxfilter); __raw_writeq(0, s->sbm_imr); - + /* Turn off ticker */ - + /* XXX */ - + /* turn off receiver and transmitter */ - + __raw_writeq(0, s->sbm_macenable); - + /* We're stopped now. */ - + s->sbm_state = sbmac_state_off; - + /* * Stop DMA channels (rings should be ok now) */ - + sbdma_channel_stop(&(s->sbm_rxdma)); sbdma_channel_stop(&(s->sbm_txdma)); - + /* Empty the receive and transmit rings */ - + sbdma_emptyring(&(s->sbm_rxdma)); sbdma_emptyring(&(s->sbm_txdma)); - + } /********************************************************************** * SBMAC_SET_CHANNEL_STATE(state) - * + * * Set the channel's state ON or OFF - * - * Input parameters: + * + * Input parameters: * state - new state - * + * * Return value: * old state ********************************************************************* */ @@ -1701,43 +1701,43 @@ static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc, sbmac_state_t state) { sbmac_state_t oldstate = sc->sbm_state; - + /* * If same as previous state, return */ - + if (state == oldstate) { return oldstate; } - + /* - * If new state is ON, turn channel on + * If new state is ON, turn channel on */ - + if (state == sbmac_state_on) { sbmac_channel_start(sc); } else { sbmac_channel_stop(sc); } - + /* * Return previous state */ - + return oldstate; } /********************************************************************** * SBMAC_PROMISCUOUS_MODE(sc,onoff) - * + * * Turn on or off promiscuous mode - * - * Input parameters: + * + * Input parameters: * sc - softc * onoff - 1 to turn on, 0 to turn off - * + * * Return value: * nothing ********************************************************************* */ @@ -1745,15 +1745,15 @@ static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc, static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) { uint64_t reg; - + if (sc->sbm_state != sbmac_state_on) return; - + if (onoff) { reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_ALLPKT_EN; __raw_writeq(reg, sc->sbm_rxfilter); - } + } else { reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_ALLPKT_EN; @@ -1763,12 +1763,12 @@ static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) /********************************************************************** * SBMAC_SETIPHDR_OFFSET(sc,onoff) - * + * * Set the iphdr offset as 15 assuming ethernet encapsulation - * - * Input parameters: + * + * Input parameters: * sc - softc - * + * * Return value: * nothing ********************************************************************* */ @@ -1776,12 +1776,12 @@ static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) { uint64_t reg; - + /* Hard code the off set to 15 for now */ reg = __raw_readq(sc->sbm_rxfilter); reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15); __raw_writeq(reg, sc->sbm_rxfilter); - + /* read system identification to determine revision */ if (periph_rev >= 2) { sc->rx_hw_checksum = ENABLE; @@ -1793,13 +1793,13 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) /********************************************************************** * SBMAC_ADDR2REG(ptr) - * + * * Convert six bytes into the 64-bit register value that * we typically write into the SBMAC's address/mcast registers - * - * Input parameters: + * + * Input parameters: * ptr - pointer to 6 bytes - * + * * Return value: * register value ********************************************************************* */ @@ -1807,35 +1807,35 @@ static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) static uint64_t sbmac_addr2reg(unsigned char *ptr) { uint64_t reg = 0; - + ptr += 6; - - reg |= (uint64_t) *(--ptr); + + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); + reg |= (uint64_t) *(--ptr); reg <<= 8; - reg |= (uint64_t) *(--ptr); - + reg |= (uint64_t) *(--ptr); + return reg; } /********************************************************************** * SBMAC_SET_SPEED(s,speed) - * + * * Configure LAN speed for the specified MAC. * Warning: must be called when MAC is off! - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * speed - speed to set MAC to (see sbmac_speed_t enum) - * + * * Return value: * 1 if successful * 0 indicates invalid parameters @@ -1849,31 +1849,31 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) /* * Save new current values */ - + s->sbm_speed = speed; - + if (s->sbm_state == sbmac_state_on) return 0; /* save for next restart */ /* - * Read current register values + * Read current register values */ - + cfg = __raw_readq(s->sbm_maccfg); framecfg = __raw_readq(s->sbm_framecfg); - + /* * Mask out the stuff we want to change */ - + cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL); framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH | M_MAC_SLOT_SIZE); - + /* * Now add in the new bits */ - + switch (speed) { case sbmac_speed_10: framecfg |= V_MAC_IFG_RX_10 | @@ -1882,7 +1882,7 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_10; cfg |= V_MAC_SPEED_SEL_10MBPS; break; - + case sbmac_speed_100: framecfg |= V_MAC_IFG_RX_100 | V_MAC_IFG_TX_100 | @@ -1890,7 +1890,7 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_100; cfg |= V_MAC_SPEED_SEL_100MBPS ; break; - + case sbmac_speed_1000: framecfg |= V_MAC_IFG_RX_1000 | V_MAC_IFG_TX_1000 | @@ -1898,34 +1898,34 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) V_MAC_SLOT_SIZE_1000; cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN; break; - + case sbmac_speed_auto: /* XXX not implemented */ /* fall through */ default: return 0; } - + /* - * Send the bits back to the hardware + * Send the bits back to the hardware */ - + __raw_writeq(framecfg, s->sbm_framecfg); __raw_writeq(cfg, s->sbm_maccfg); - + return 1; } /********************************************************************** * SBMAC_SET_DUPLEX(s,duplex,fc) - * + * * Set Ethernet duplex and flow control options for this MAC * Warning: must be called when MAC is off! - * - * Input parameters: + * + * Input parameters: * s - sbmac structure * duplex - duplex setting (see sbmac_duplex_t) * fc - flow control setting (see sbmac_fc_t) - * + * * Return value: * 1 if ok * 0 if an invalid parameter combination was specified @@ -1934,67 +1934,67 @@ static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed) static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc) { uint64_t cfg; - + /* * Save new current values */ - + s->sbm_duplex = duplex; s->sbm_fc = fc; - + if (s->sbm_state == sbmac_state_on) return 0; /* save for next restart */ - + /* - * Read current register values + * Read current register values */ - + cfg = __raw_readq(s->sbm_maccfg); - + /* * Mask off the stuff we're about to change */ - + cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN); - - + + switch (duplex) { case sbmac_duplex_half: switch (fc) { case sbmac_fc_disabled: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED; break; - + case sbmac_fc_collision: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED; break; - + case sbmac_fc_carrier: cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR; break; - + case sbmac_fc_auto: /* XXX not implemented */ - /* fall through */ + /* fall through */ case sbmac_fc_frame: /* not valid in half duplex */ default: /* invalid selection */ return 0; } break; - + case sbmac_duplex_full: switch (fc) { case sbmac_fc_disabled: cfg |= V_MAC_FC_CMD_DISABLED; break; - + case sbmac_fc_frame: cfg |= V_MAC_FC_CMD_ENABLED; break; - + case sbmac_fc_collision: /* not valid in full duplex */ case sbmac_fc_carrier: /* not valid in full duplex */ case sbmac_fc_auto: /* XXX not implemented */ - /* fall through */ + /* fall through */ default: return 0; } @@ -2003,13 +2003,13 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc /* XXX not implemented */ break; } - + /* - * Send the bits back to the hardware + * Send the bits back to the hardware */ - + __raw_writeq(cfg, s->sbm_maccfg); - + return 1; } @@ -2018,12 +2018,12 @@ static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc /********************************************************************** * SBMAC_INTR() - * + * * Interrupt handler for MAC interrupts - * - * Input parameters: + * + * Input parameters: * MAC structure - * + * * Return value: * nothing ********************************************************************* */ @@ -2035,27 +2035,27 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) int handled = 0; for (;;) { - + /* * Read the ISR (this clears the bits in the real * register, except for counter addr) */ - + isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; - + if (isr == 0) break; handled = 1; - + /* * Transmits on channel 0 */ - + if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) { sbdma_tx_process(sc,&(sc->sbm_txdma)); } - + /* * Receives on channel 0 */ @@ -2075,8 +2075,8 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) * EOP_SEEN here takes care of this case. * (EOP_SEEN is part of M_MAC_INT_CHANNEL << S_MAC_RX_CH0) */ - - + + if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) { sbdma_rx_process(sc,&(sc->sbm_rxdma)); } @@ -2087,29 +2087,29 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance,struct pt_regs *rgs) /********************************************************************** * SBMAC_START_TX(skb,dev) - * - * Start output on the specified interface. Basically, we + * + * Start output on the specified interface. Basically, we * queue as many buffers as we can until the ring fills up, or * we run off the end of the queue, whichever comes first. - * - * Input parameters: - * - * + * + * Input parameters: + * + * * Return value: * nothing ********************************************************************* */ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + /* lock eth irq */ spin_lock_irq (&sc->sbm_lock); - + /* - * Put the buffer on the transmit ring. If we + * Put the buffer on the transmit ring. If we * don't have room, stop the queue. */ - + if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) { /* XXX save skb that we could not send */ netif_stop_queue(dev); @@ -2117,24 +2117,24 @@ static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) return 1; } - + dev->trans_start = jiffies; - + spin_unlock_irq (&sc->sbm_lock); - + return 0; } /********************************************************************** * SBMAC_SETMULTI(sc) - * + * * Reprogram the multicast table into the hardware, given * the list of multicasts associated with the interface * structure. - * - * Input parameters: + * + * Input parameters: * sc - softc - * + * * Return value: * nothing ********************************************************************* */ @@ -2146,52 +2146,52 @@ static void sbmac_setmulti(struct sbmac_softc *sc) int idx; struct dev_mc_list *mclist; struct net_device *dev = sc->sbm_dev; - - /* + + /* * Clear out entire multicast table. We do this by nuking * the entire hash table and all the direct matches except - * the first one, which is used for our station address + * the first one, which is used for our station address */ - + for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)); __raw_writeq(0, port); } - + for (idx = 0; idx < MAC_HASH_COUNT; idx++) { port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t)); __raw_writeq(0, port); } - + /* * Clear the filter to say we don't want any multicasts. */ - + reg = __raw_readq(sc->sbm_rxfilter); reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); __raw_writeq(reg, sc->sbm_rxfilter); - + if (dev->flags & IFF_ALLMULTI) { - /* - * Enable ALL multicasts. Do this by inverting the - * multicast enable bit. + /* + * Enable ALL multicasts. Do this by inverting the + * multicast enable bit. */ reg = __raw_readq(sc->sbm_rxfilter); reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); __raw_writeq(reg, sc->sbm_rxfilter); return; } - - /* + + /* * Progam new multicast entries. For now, only use the * perfect filter. In the future we'll need to use the * hash filter if the perfect filter overflows */ - + /* XXX only using perfect filter for now, need to use hash * XXX if the table overflows */ - + idx = 1; /* skip station address */ mclist = dev->mc_list; while (mclist && (idx < MAC_ADDR_COUNT)) { @@ -2201,12 +2201,12 @@ static void sbmac_setmulti(struct sbmac_softc *sc) idx++; mclist = mclist->next; } - - /* + + /* * Enable the "accept multicast bits" if we programmed at least one - * multicast. + * multicast. */ - + if (idx > 1) { reg = __raw_readq(sc->sbm_rxfilter); reg |= M_MAC_MCAST_EN; @@ -2219,12 +2219,12 @@ static void sbmac_setmulti(struct sbmac_softc *sc) #if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) /********************************************************************** * SBMAC_PARSE_XDIGIT(str) - * + * * Parse a hex digit, returning its value - * - * Input parameters: + * + * Input parameters: * str - character - * + * * Return value: * hex value, or -1 if invalid ********************************************************************* */ @@ -2232,7 +2232,7 @@ static void sbmac_setmulti(struct sbmac_softc *sc) static int sbmac_parse_xdigit(char str) { int digit; - + if ((str >= '0') && (str <= '9')) digit = str - '0'; else if ((str >= 'a') && (str <= 'f')) @@ -2241,20 +2241,20 @@ static int sbmac_parse_xdigit(char str) digit = str - 'A' + 10; else return -1; - + return digit; } /********************************************************************** * SBMAC_PARSE_HWADDR(str,hwaddr) - * + * * Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte * Ethernet address. - * - * Input parameters: + * + * Input parameters: * str - string * hwaddr - pointer to hardware address - * + * * Return value: * 0 if ok, else -1 ********************************************************************* */ @@ -2263,7 +2263,7 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) { int digit1,digit2; int idx = 6; - + while (*str && (idx > 0)) { digit1 = sbmac_parse_xdigit(*str); if (digit1 < 0) @@ -2271,7 +2271,7 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) str++; if (!*str) return -1; - + if ((*str == ':') || (*str == '-')) { digit2 = digit1; digit1 = 0; @@ -2282,10 +2282,10 @@ static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr) return -1; str++; } - + *hwaddr++ = (digit1 << 4) | digit2; idx--; - + if (*str == '-') str++; if (*str == ':') @@ -2306,12 +2306,12 @@ static int sb1250_change_mtu(struct net_device *_dev, int new_mtu) /********************************************************************** * SBMAC_INIT(dev) - * + * * Attach routine - init hardware and hook ourselves into linux - * - * Input parameters: + * + * Input parameters: * dev - net_device structure - * + * * Return value: * status ********************************************************************* */ @@ -2323,53 +2323,53 @@ static int sbmac_init(struct net_device *dev, int idx) uint64_t ea_reg; int i; int err; - + sc = netdev_priv(dev); - + /* Determine controller base address */ - + sc->sbm_base = IOADDR(dev->base_addr); sc->sbm_dev = dev; sc->sbe_idx = idx; - + eaddr = sc->sbm_hwaddr; - - /* + + /* * Read the ethernet address. The firwmare left this programmed * for us in the ethernet address register for each mac. */ - + ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR); __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR); for (i = 0; i < 6; i++) { eaddr[i] = (uint8_t) (ea_reg & 0xFF); ea_reg >>= 8; } - + for (i = 0; i < 6; i++) { dev->dev_addr[i] = eaddr[i]; } - - + + /* - * Init packet size + * Init packet size */ - + sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN; - /* + /* * Initialize context (get pointers to registers and stuff), then * allocate the memory for the descriptor tables. */ - + sbmac_initctx(sc); - + /* * Set up Linux device callins */ - + spin_lock_init(&(sc->sbm_lock)); - + dev->open = sbmac_open; dev->hard_start_xmit = sbmac_start_tx; dev->stop = sbmac_close; @@ -2399,10 +2399,10 @@ static int sbmac_init(struct net_device *dev, int idx) * was being displayed) */ printk(KERN_INFO - "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n", + "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n", dev->name, dev->base_addr, eaddr[0],eaddr[1],eaddr[2],eaddr[3],eaddr[4],eaddr[5]); - + return 0; @@ -2416,12 +2416,12 @@ static int sbmac_init(struct net_device *dev, int idx) static int sbmac_open(struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + if (debug > 1) { printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq); } - - /* + + /* * map/route interrupt (clear status first, in case something * weird is pending; we haven't initialized the mac registers * yet) @@ -2432,35 +2432,35 @@ static int sbmac_open(struct net_device *dev) return -EBUSY; /* - * Configure default speed + * Configure default speed */ sbmac_mii_poll(sc,noisy_mii); - + /* * Turn on the channel */ sbmac_set_channel_state(sc,sbmac_state_on); - + /* * XXX Station address is in dev->dev_addr */ - + if (dev->if_port == 0) - dev->if_port = 0; - + dev->if_port = 0; + netif_start_queue(dev); - + sbmac_set_rx_mode(dev); - + /* Set the timer to check for link beat. */ init_timer(&sc->sbm_timer); sc->sbm_timer.expires = jiffies + 2 * HZ/100; sc->sbm_timer.data = (unsigned long)dev; sc->sbm_timer.function = &sbmac_timer; add_timer(&sc->sbm_timer); - + return 0; } @@ -2578,20 +2578,20 @@ static void sbmac_timer(unsigned long data) int mii_status; spin_lock_irq (&sc->sbm_lock); - + /* make IFF_RUNNING follow the MII status bit "Link established" */ mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR); - + if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) { sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT; if (mii_status & BMSR_LINKSTAT) { netif_carrier_on(dev); } else { - netif_carrier_off(dev); + netif_carrier_off(dev); } } - + /* * Poll the PHY to see what speed we should be running at */ @@ -2609,9 +2609,9 @@ static void sbmac_timer(unsigned long data) sbmac_channel_start(sc); } } - + spin_unlock_irq (&sc->sbm_lock); - + sc->sbm_timer.expires = jiffies + next_tick; add_timer(&sc->sbm_timer); } @@ -2620,13 +2620,13 @@ static void sbmac_timer(unsigned long data) static void sbmac_tx_timeout (struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); - + spin_lock_irq (&sc->sbm_lock); - - + + dev->trans_start = jiffies; sc->sbm_stats.tx_errors++; - + spin_unlock_irq (&sc->sbm_lock); printk (KERN_WARNING "%s: Transmit timed out\n",dev->name); @@ -2639,13 +2639,13 @@ static struct net_device_stats *sbmac_get_stats(struct net_device *dev) { struct sbmac_softc *sc = netdev_priv(dev); unsigned long flags; - + spin_lock_irqsave(&sc->sbm_lock, flags); - + /* XXX update other stats here */ - + spin_unlock_irqrestore(&sc->sbm_lock, flags); - + return &sc->sbm_stats; } @@ -2662,8 +2662,8 @@ static void sbmac_set_rx_mode(struct net_device *dev) /* * Promiscuous changed. */ - - if (dev->flags & IFF_PROMISC) { + + if (dev->flags & IFF_PROMISC) { /* Unconditionally log net taps. */ msg_flag = 1; sbmac_promiscuous_mode(sc,1); @@ -2674,18 +2674,18 @@ static void sbmac_set_rx_mode(struct net_device *dev) } } spin_unlock_irqrestore(&sc->sbm_lock, flags); - + if (msg_flag) { printk(KERN_NOTICE "%s: Promiscuous mode %sabled.\n", dev->name,(msg_flag==1)?"en":"dis"); } - + /* * Program the multicasts. Do this every time. */ - + sbmac_setmulti(sc); - + } static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) @@ -2694,10 +2694,10 @@ static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) u16 *data = (u16 *)&rq->ifr_ifru; unsigned long flags; int retval; - + spin_lock_irqsave(&sc->sbm_lock, flags); retval = 0; - + switch(cmd) { case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */ data[0] = sc->sbm_phys[0] & 0x1f; @@ -2719,7 +2719,7 @@ static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) default: retval = -EOPNOTSUPP; } - + spin_unlock_irqrestore(&sc->sbm_lock, flags); return retval; } @@ -2750,7 +2750,7 @@ static int sbmac_close(struct net_device *dev) sbdma_emptyring(&(sc->sbm_txdma)); sbdma_emptyring(&(sc->sbm_rxdma)); - + return 0; } @@ -2781,7 +2781,7 @@ sbmac_init_module(void) struct net_device *dev; unsigned long port; int chip_max_units; - + /* * For bringup when not using the firmware, we can pre-fill * the MAC addresses using the environment variables @@ -2827,7 +2827,7 @@ sbmac_init_module(void) port = A_MAC_CHANNEL_BASE(idx); - /* + /* * The R_MAC_ETHERNET_ADDR register will be set to some nonzero * value for us by the firmware if we're going to use this MAC. * If we find a zero, skip this MAC. @@ -2845,7 +2845,7 @@ sbmac_init_module(void) */ dev = alloc_etherdev(sizeof(struct sbmac_softc)); - if (!dev) + if (!dev) return -ENOMEM; /* return ENOMEM */ printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port); -- GitLab From b06c093ed2dc968b3c140dafa55fa6c7b72169e5 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 19 Oct 2005 08:07:34 -0400 Subject: [PATCH 0319/1519] [PATCH] sundance: include MII address 0 in PHY probe Include MII address 0 at the end of the PHY scan. This covers the entire range of possible MII addresses. Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index d8a7e08cab2b..5de0554fd7c6 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -609,16 +609,17 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, np->phys[0] = 1; /* Default setting */ np->mii_preamble_required++; - for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { + for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) { int mii_status = mdio_read(dev, phy, MII_BMSR); + int phyx = phy & 0x1f; if (mii_status != 0xffff && mii_status != 0x0000) { - np->phys[phy_idx++] = phy; - np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); + np->phys[phy_idx++] = phyx; + np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE); if ((mii_status & 0x0040) == 0) np->mii_preamble_required++; printk(KERN_INFO "%s: MII PHY found at address %d, status " "0x%4.4x advertising %4.4x.\n", - dev->name, phy, mii_status, np->mii_if.advertising); + dev->name, phyx, mii_status, np->mii_if.advertising); } } np->mii_preamble_required--; -- GitLab From 07b8fede6da76ae6a0f547716c44b801a116bb4a Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Wed, 19 Oct 2005 10:40:08 -0400 Subject: [PATCH 0320/1519] [PATCH] e1000: Driver version, white space, comments, device id & other Driver version, white space, comments, device id & other Originally posted on 8/31 (and perhaps before)...I think it has not been committed because the patch from that posting was damaged. I'm reposting to make sure it gets in... :-) Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: John W. Linville Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 40128b9d16ef..6b72f6acdd54 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -43,7 +43,7 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "6.0.60-k2"DRIVERNAPI +#define DRV_VERSION "6.1.16-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; @@ -80,6 +80,9 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x1026), INTEL_E1000_ETHERNET_DEVICE(0x1027), INTEL_E1000_ETHERNET_DEVICE(0x1028), + INTEL_E1000_ETHERNET_DEVICE(0x105E), + INTEL_E1000_ETHERNET_DEVICE(0x105F), + INTEL_E1000_ETHERNET_DEVICE(0x1060), INTEL_E1000_ETHERNET_DEVICE(0x1075), INTEL_E1000_ETHERNET_DEVICE(0x1076), INTEL_E1000_ETHERNET_DEVICE(0x1077), @@ -88,10 +91,13 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x107A), INTEL_E1000_ETHERNET_DEVICE(0x107B), INTEL_E1000_ETHERNET_DEVICE(0x107C), + INTEL_E1000_ETHERNET_DEVICE(0x107D), + INTEL_E1000_ETHERNET_DEVICE(0x107E), + INTEL_E1000_ETHERNET_DEVICE(0x107F), INTEL_E1000_ETHERNET_DEVICE(0x108A), INTEL_E1000_ETHERNET_DEVICE(0x108B), INTEL_E1000_ETHERNET_DEVICE(0x108C), - INTEL_E1000_ETHERNET_DEVICE(0x1099), + INTEL_E1000_ETHERNET_DEVICE(0x109A), /* required last entry */ {0,} }; @@ -398,8 +404,7 @@ e1000_down(struct e1000_adapter *adapter) e1000_clean_all_tx_rings(adapter); e1000_clean_all_rx_rings(adapter); - /* If WoL is not enabled - * and management mode is not IAMT + /* If WoL is not enabled and management mode is not IAMT * Power down the PHY so no link is implied when interface is down */ if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 && adapter->hw.media_type == e1000_media_type_copper && -- GitLab From f0f15ab5542f73d07e35eeee713df289599427b2 Mon Sep 17 00:00:00 2001 From: Hong Liu Date: Thu, 20 Oct 2005 11:06:36 -0500 Subject: [PATCH 0321/1519] Fixed oops if an uninitialized key is used for encryption. Without this patch, if you try and use a key that has not been configured, for example: % iwconfig eth1 key deadbeef00 [2] without having configured key [1], then the active key will still be [1], but privacy will now be enabled. Transmission of a packet in this situation will result in a kernel oops. Signed-off-by: James Ketrenos --- net/ieee80211/ieee80211_tx.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index 2955b7aa5a38..f4f2a33973a7 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -157,11 +157,14 @@ static inline int ieee80211_encrypt_fragment(struct ieee80211_device *ieee, struct ieee80211_crypt_data *crypt = ieee->crypt[ieee->tx_keyidx]; int res; + if (crypt == NULL) + return -1; + /* To encrypt, frame format is: * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */ atomic_inc(&crypt->refcnt); res = 0; - if (crypt->ops->encrypt_mpdu) + if (crypt->ops && crypt->ops->encrypt_mpdu) res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv); atomic_dec(&crypt->refcnt); @@ -264,9 +267,9 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) && ieee->sec.encrypt; - host_encrypt = ieee->host_encrypt && encrypt; - host_encrypt_msdu = ieee->host_encrypt_msdu && encrypt; - host_build_iv = ieee->host_build_iv && encrypt; + host_encrypt = ieee->host_encrypt && encrypt && crypt; + host_encrypt_msdu = ieee->host_encrypt_msdu && encrypt && crypt; + host_build_iv = ieee->host_build_iv && encrypt && crypt; if (!encrypt && ieee->ieee802_1x && ieee->drop_unencrypted && ether_type != ETH_P_PAE) { -- GitLab From 3910f44d79a8a4a26fcfefbf16c5b8e1a7743175 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 20 Oct 2005 12:29:36 -0700 Subject: [PATCH 0322/1519] [IB] cm: Add missing break in switch Add missing "break" in switch statement. Without the break, the CM ended up always falling through and setting every connection request to use RC transport, which meant that UC connections didn't work. Signed-off-by: Roland Dreier --- drivers/infiniband/core/cm_msgs.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/core/cm_msgs.h b/drivers/infiniband/core/cm_msgs.h index 813ab70bf6d5..4d3aee90c249 100644 --- a/drivers/infiniband/core/cm_msgs.h +++ b/drivers/infiniband/core/cm_msgs.h @@ -186,6 +186,7 @@ static inline void cm_req_set_qp_type(struct cm_req_msg *req_msg, req_msg->offset40 = cpu_to_be32((be32_to_cpu( req_msg->offset40) & 0xFFFFFFF9) | 0x2); + break; default: req_msg->offset40 = cpu_to_be32(be32_to_cpu( req_msg->offset40) & -- GitLab From 2e0c512aff978a7040464e81fc9c0dfdf4639c23 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 20 Oct 2005 12:30:16 -0700 Subject: [PATCH 0323/1519] [IB] user_mad: trivial coding style fixes Add spaces after "sizeof" operator to match the rest of file. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index a64d6b4dcc16..38f4bfbb7135 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -280,14 +280,14 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, length = count - sizeof (struct ib_user_mad); packet = kmalloc(sizeof *packet + sizeof(struct ib_mad_hdr) + - sizeof(struct ib_rmpp_hdr), GFP_KERNEL); + sizeof (struct ib_rmpp_hdr), GFP_KERNEL); if (!packet) return -ENOMEM; if (copy_from_user(&packet->mad, buf, sizeof (struct ib_user_mad) + - sizeof(struct ib_mad_hdr) + - sizeof(struct ib_rmpp_hdr))) { + sizeof (struct ib_mad_hdr) + + sizeof (struct ib_rmpp_hdr))) { ret = -EFAULT; goto err; } @@ -349,7 +349,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, } rmpp_active = 1; } else { - if (length > sizeof(struct ib_mad)) { + if (length > sizeof (struct ib_mad)) { ret = -EINVAL; goto err_ah; } @@ -376,17 +376,17 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, if (!rmpp_active) { /* Copy message from user into send buffer */ if (copy_from_user(packet->msg->mad, - buf + sizeof(struct ib_user_mad), length)) { + buf + sizeof (struct ib_user_mad), length)) { ret = -EFAULT; goto err_msg; } } else { - rmpp_hdr_size = sizeof(struct ib_mad_hdr) + - sizeof(struct ib_rmpp_hdr); + rmpp_hdr_size = sizeof (struct ib_mad_hdr) + + sizeof (struct ib_rmpp_hdr); /* Only copy MAD headers (RMPP header in place) */ memcpy(packet->msg->mad, packet->mad.data, - sizeof(struct ib_mad_hdr)); + sizeof (struct ib_mad_hdr)); /* Now, copy rest of message from user into send buffer */ if (copy_from_user(((struct ib_rmpp_mad *) packet->msg->mad)->data, -- GitLab From bbf207860931b6a033d0fbcd170ae2332c0d8216 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 20 Oct 2005 12:54:01 -0700 Subject: [PATCH 0324/1519] [IB] user_mad: Use class_device.devt Use devt member of struct class_device so that we don't have to create our own "dev" file in sysfs. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 38f4bfbb7135..fd200c064a2e 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -671,17 +671,6 @@ static struct ib_client umad_client = { .remove = ib_umad_remove_one }; -static ssize_t show_dev(struct class_device *class_dev, char *buf) -{ - struct ib_umad_port *port = class_get_devdata(class_dev); - - if (class_dev == &port->class_dev) - return print_dev_t(buf, port->dev.dev); - else - return print_dev_t(buf, port->sm_dev.dev); -} -static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL); - static ssize_t show_ibdev(struct class_device *class_dev, char *buf) { struct ib_umad_port *port = class_get_devdata(class_dev); @@ -762,6 +751,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, port->class_dev.class = &umad_class; port->class_dev.dev = device->dma_device; + port->class_dev.devt = port->dev.dev; snprintf(port->class_dev.class_id, BUS_ID_SIZE, "umad%d", port->devnum); @@ -771,8 +761,6 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, class_set_devdata(&port->class_dev, port); kref_get(&port->umad_dev->ref); - if (class_device_create_file(&port->class_dev, &class_device_attr_dev)) - goto err_class; if (class_device_create_file(&port->class_dev, &class_device_attr_ibdev)) goto err_class; if (class_device_create_file(&port->class_dev, &class_device_attr_port)) @@ -786,6 +774,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, port->sm_class_dev.class = &umad_class; port->sm_class_dev.dev = device->dma_device; + port->sm_class_dev.devt = port->sm_dev.dev; snprintf(port->sm_class_dev.class_id, BUS_ID_SIZE, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS); @@ -795,8 +784,6 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, class_set_devdata(&port->sm_class_dev, port); kref_get(&port->umad_dev->ref); - if (class_device_create_file(&port->sm_class_dev, &class_device_attr_dev)) - goto err_sm_class; if (class_device_create_file(&port->sm_class_dev, &class_device_attr_ibdev)) goto err_sm_class; if (class_device_create_file(&port->sm_class_dev, &class_device_attr_port)) -- GitLab From 7e6c1208598004a80b1c1fca4953eb9f2a6aa8bc Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Thu, 20 Oct 2005 08:39:43 -0400 Subject: [PATCH 0325/1519] [PATCH] libata: Marvell endian fix Jeff found an endian bug in the Marvell driver (thanks!). Here's the fix for it. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index d457f5673476..9b6213928f7a 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.24" +#define DRV_VERSION "0.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -800,7 +800,8 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); } if (0 < qc->n_elem) { - pp->sg_tbl[qc->n_elem - 1].flags_size |= EPRD_FLAG_END_OF_TBL; + pp->sg_tbl[qc->n_elem - 1].flags_size |= + cpu_to_le32(EPRD_FLAG_END_OF_TBL); } } -- GitLab From 59b81827071a8ae7f399da533d268e1e33bfeeb7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 20 Oct 2005 12:01:28 +0100 Subject: [PATCH 0326/1519] [PATCH] sb1250-mac: PHY probing fixes. Improve sb1250-mac driver to probe for PHYs at addresses other than 1, such as the PHYs on BigSur. Signed-Off-By: Andy Isaacson Signed-off-by: Ralf Baechle Signed-off-by: Jeff Garzik --- drivers/net/sb1250-mac.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index d4c8ecdfa4a7..aa4ca1821759 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -296,6 +296,7 @@ static void sbmac_set_rx_mode(struct net_device *dev); static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int sbmac_close(struct net_device *dev); static int sbmac_mii_poll(struct sbmac_softc *s,int noisy); +static int sbmac_mii_probe(struct net_device *dev); static void sbmac_mii_sync(struct sbmac_softc *s); static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt); @@ -433,6 +434,9 @@ static uint64_t sbmac_orig_hwaddr[MAX_UNITS]; #define MII_BMCR 0x00 /* Basic mode control register (rw) */ #define MII_BMSR 0x01 /* Basic mode status register (ro) */ +#define MII_PHYIDR1 0x02 +#define MII_PHYIDR2 0x03 + #define MII_K1STSR 0x0A /* 1K Status Register (ro) */ #define MII_ANLPAR 0x05 /* Autonegotiation lnk partner abilities (rw) */ @@ -2431,6 +2435,15 @@ static int sbmac_open(struct net_device *dev) if (request_irq(dev->irq, &sbmac_intr, SA_SHIRQ, dev->name, dev)) return -EBUSY; + /* + * Probe phy address + */ + + if(sbmac_mii_probe(dev) == -1) { + printk("%s: failed to probe PHY.\n", dev->name); + return -EINVAL; + } + /* * Configure default speed */ @@ -2464,6 +2477,29 @@ static int sbmac_open(struct net_device *dev) return 0; } +static int sbmac_mii_probe(struct net_device *dev) +{ + int i; + struct sbmac_softc *s = netdev_priv(dev); + u16 bmsr, id1, id2; + u32 vendor, device; + + for (i=1; i<31; i++) { + bmsr = sbmac_mii_read(s, i, MII_BMSR); + if (bmsr != 0) { + s->sbm_phys[0] = i; + id1 = sbmac_mii_read(s, i, MII_PHYIDR1); + id2 = sbmac_mii_read(s, i, MII_PHYIDR2); + vendor = ((u32)id1 << 6) | ((id2 >> 10) & 0x3f); + device = (id2 >> 4) & 0x3f; + + printk(KERN_INFO "%s: found phy %d, vendor %06x part %02x\n", + dev->name, i, vendor, device); + return i; + } + } + return -1; +} static int sbmac_mii_poll(struct sbmac_softc *s,int noisy) -- GitLab From 4e51336a00bdcb42960acca52c23e90e9f4e6959 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 20 Oct 2005 14:22:41 -0700 Subject: [PATCH 0327/1519] NFSv4: Final tweak to sequence id Sacrifice queueing fairness for performance. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 2 +- fs/nfs/nfs4state.c | 23 +++++++++++++---------- 2 files changed, 14 insertions(+), 11 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 45bff1d1a513..5c0dd26d0985 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -110,8 +110,8 @@ struct nfs_seqid_counter { }; struct nfs_seqid { - struct list_head list; struct nfs_seqid_counter *sequence; + struct list_head list; }; static inline void nfs_confirm_seqid(struct nfs_seqid_counter *seqid, int status) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index da0861db57fb..c59ef90e956b 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -670,15 +670,12 @@ void nfs4_copy_stateid(nfs4_stateid *dst, struct nfs4_state *state, fl_owner_t f struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter) { - struct rpc_sequence *sequence = counter->sequence; struct nfs_seqid *new; new = kmalloc(sizeof(*new), GFP_KERNEL); if (new != NULL) { new->sequence = counter; - spin_lock(&sequence->lock); - list_add_tail(&new->list, &sequence->list); - spin_unlock(&sequence->lock); + INIT_LIST_HEAD(&new->list); } return new; } @@ -687,10 +684,12 @@ void nfs_free_seqid(struct nfs_seqid *seqid) { struct rpc_sequence *sequence = seqid->sequence->sequence; - spin_lock(&sequence->lock); - list_del(&seqid->list); - rpc_wake_up(&sequence->wait); - spin_unlock(&sequence->lock); + if (!list_empty(&seqid->list)) { + spin_lock(&sequence->lock); + list_del(&seqid->list); + spin_unlock(&sequence->lock); + } + rpc_wake_up_next(&sequence->wait); kfree(seqid); } @@ -746,12 +745,16 @@ int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task) struct rpc_sequence *sequence = seqid->sequence->sequence; int status = 0; + if (sequence->list.next == &seqid->list) + goto out; spin_lock(&sequence->lock); - if (sequence->list.next != &seqid->list) { + if (!list_empty(&sequence->list)) { rpc_sleep_on(&sequence->wait, task, NULL, NULL); status = -EAGAIN; - } + } else + list_add(&seqid->list, &sequence->list); spin_unlock(&sequence->lock); +out: return status; } -- GitLab From ec073428281b401f1142cb84b277a5b00c7994c9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 20 Oct 2005 14:22:47 -0700 Subject: [PATCH 0328/1519] NFSv4: Fix up locking for nfs4_state_owner Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 2 ++ fs/nfs/nfs4state.c | 20 +++++++++++++++----- 3 files changed, 18 insertions(+), 5 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 5c0dd26d0985..78a53f5a9f18 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -126,6 +126,7 @@ static inline void nfs_confirm_seqid(struct nfs_seqid_counter *seqid, int status * semantics by allowing the server to identify replayed requests. */ struct nfs4_state_owner { + spinlock_t so_lock; struct list_head so_list; /* per-clientid list of state_owners */ struct nfs4_client *so_client; u32 so_id; /* 32-bit identifier, unique */ diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 2d9357cf3fc5..9c1da34036aa 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -212,6 +212,7 @@ static void update_open_stateid(struct nfs4_state *state, nfs4_stateid *stateid, open_flags &= (FMODE_READ|FMODE_WRITE); /* Protect against nfs4_find_state() */ + spin_lock(&state->owner->so_lock); spin_lock(&inode->i_lock); state->state |= open_flags; /* NB! List reordering - see the reclaim code for why. */ @@ -221,6 +222,7 @@ static void update_open_stateid(struct nfs4_state *state, nfs4_stateid *stateid, state->nreaders++; memcpy(&state->stateid, stateid, sizeof(state->stateid)); spin_unlock(&inode->i_lock); + spin_unlock(&state->owner->so_lock); } /* diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index c59ef90e956b..2d5a6a2b9dec 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -267,6 +267,7 @@ nfs4_alloc_state_owner(void) sp = kzalloc(sizeof(*sp),GFP_KERNEL); if (!sp) return NULL; + spin_lock_init(&sp->so_lock); INIT_LIST_HEAD(&sp->so_states); INIT_LIST_HEAD(&sp->so_delegations); rpc_init_wait_queue(&sp->so_sequence.wait, "Seqid_waitqueue"); @@ -438,20 +439,23 @@ nfs4_get_open_state(struct inode *inode, struct nfs4_state_owner *owner) if (state) goto out; new = nfs4_alloc_open_state(); + spin_lock(&owner->so_lock); spin_lock(&inode->i_lock); state = __nfs4_find_state_byowner(inode, owner); if (state == NULL && new != NULL) { state = new; - /* Note: The reclaim code dictates that we add stateless - * and read-only stateids to the end of the list */ - list_add_tail(&state->open_states, &owner->so_states); state->owner = owner; atomic_inc(&owner->so_count); list_add(&state->inode_states, &nfsi->open_states); state->inode = igrab(inode); spin_unlock(&inode->i_lock); + /* Note: The reclaim code dictates that we add stateless + * and read-only stateids to the end of the list */ + list_add_tail(&state->open_states, &owner->so_states); + spin_unlock(&owner->so_lock); } else { spin_unlock(&inode->i_lock); + spin_unlock(&owner->so_lock); if (new) nfs4_free_open_state(new); } @@ -468,12 +472,14 @@ void nfs4_put_open_state(struct nfs4_state *state) struct inode *inode = state->inode; struct nfs4_state_owner *owner = state->owner; - if (!atomic_dec_and_lock(&state->count, &inode->i_lock)) + if (!atomic_dec_and_lock(&state->count, &owner->so_lock)) return; + spin_lock(&inode->i_lock); if (!list_empty(&state->inode_states)) list_del(&state->inode_states); - spin_unlock(&inode->i_lock); list_del(&state->open_states); + spin_unlock(&inode->i_lock); + spin_unlock(&owner->so_lock); iput(inode); BUG_ON (state->state != 0); nfs4_free_open_state(state); @@ -491,6 +497,7 @@ void nfs4_close_state(struct nfs4_state *state, mode_t mode) atomic_inc(&owner->so_count); /* Protect against nfs4_find_state() */ + spin_lock(&owner->so_lock); spin_lock(&inode->i_lock); if (mode & FMODE_READ) state->nreaders--; @@ -503,6 +510,7 @@ void nfs4_close_state(struct nfs4_state *state, mode_t mode) list_move_tail(&state->open_states, &owner->so_states); } spin_unlock(&inode->i_lock); + spin_unlock(&owner->so_lock); newstate = 0; if (state->state != 0) { if (state->nreaders) @@ -899,6 +907,7 @@ static void nfs4_state_mark_reclaim(struct nfs4_client *clp) list_for_each_entry(sp, &clp->cl_state_owners, so_list) { sp->so_seqid.counter = 0; sp->so_seqid.flags = 0; + spin_lock(&sp->so_lock); list_for_each_entry(state, &sp->so_states, open_states) { list_for_each_entry(lock, &state->lock_states, ls_locks) { lock->ls_seqid.counter = 0; @@ -906,6 +915,7 @@ static void nfs4_state_mark_reclaim(struct nfs4_client *clp) lock->ls_flags &= ~NFS_LOCK_INITIALIZED; } } + spin_unlock(&sp->so_lock); } } -- GitLab From 9ee0c0a2ccd66b90eaeb2f197c0a7da43071af52 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH 0329/1519] [PATCH] iomem annotations (sata_nv) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 9fa2535dd937..8866530bc491 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -331,7 +331,7 @@ static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) return 0xffffffffU; if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); else return inl(ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -345,7 +345,7 @@ static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) return; if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); else outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); } -- GitLab From 1e4f2a96aeb373000ccd783e0f5b40294b5e668a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH 0330/1519] [PATCH] iomem annotations (ahci) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 5ec866b00479..cfa22e4ee547 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -407,7 +407,7 @@ static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) return 0xffffffffU; } - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -425,7 +425,7 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, return; } - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void ahci_phy_reset(struct ata_port *ap) @@ -453,14 +453,14 @@ static void ahci_phy_reset(struct ata_port *ap) static u8 ahci_check_status(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; return readl(mmio + PORT_TFDATA) & 0xFF; } static u8 ahci_check_err(struct ata_port *ap) { - void *mmio = (void *) ap->ioaddr.cmd_addr; + void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF; } -- GitLab From b181d3b0121e141cb410ea3126b4dbe4f8e1751a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH 0331/1519] [PATCH] iomem annotations (sata_promise) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index def7e0d9dacb..9bf8cbd29901 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -324,7 +324,7 @@ static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -333,7 +333,7 @@ static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void pdc_qc_prep(struct ata_queued_cmd *qc) @@ -523,8 +523,8 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) pp->pkt[2] = seq; wmb(); /* flush PRD, pkt writes */ - writel(pp->pkt_dma, (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ + writel(pp->pkt_dma, (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */ } static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) -- GitLab From 0420dd121d395e76f6b80fe232e7b4bc6a046f18 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH 0332/1519] [PATCH] enum safety (sata_qstor) sata_qstor strays into a nasty area - gcc handling of wide enums is full of bugs that got fixed between gcc versions creating portability nightmare. Single-member enums are safe, so are ones that stay within the range of int or unsigned int. Anything beyond that is asking for trouble. Declaration of constants split in two enums, taking the ~0UL one into a separate enum. Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_qstor.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index ffcdeb68641c..e1c1dae27c52 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -51,8 +51,6 @@ enum { QS_PRD_BYTES = QS_MAX_PRD * 16, QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES, - QS_DMA_BOUNDARY = ~0UL, - /* global register offsets */ QS_HCF_CNFG3 = 0x0003, /* host configuration offset */ QS_HID_HPHY = 0x0004, /* host physical interface info */ @@ -101,6 +99,10 @@ enum { board_2068_idx = 0, /* QStor 4-port SATA/RAID */ }; +enum { + QS_DMA_BOUNDARY = ~0UL +}; + typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t; struct qs_port_priv { -- GitLab From a9afd7cd2f65ff85f5ffe931beb879ccf12540e0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH 0333/1519] [PATCH] iomem annotations (sata_sx4) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sx4.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 540a85191172..d6d350a0b5e9 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -137,7 +137,7 @@ struct pdc_port_priv { }; struct pdc_host_priv { - void *dimm_mmio; + void __iomem *dimm_mmio; unsigned int doing_hdma; unsigned int hdma_prod; @@ -247,7 +247,7 @@ static void pdc20621_host_stop(struct ata_host_set *host_set) { struct pci_dev *pdev = to_pci_dev(host_set->dev); struct pdc_host_priv *hpriv = host_set->private_data; - void *dimm_mmio = hpriv->dimm_mmio; + void __iomem *dimm_mmio = hpriv->dimm_mmio; pci_iounmap(pdev, dimm_mmio); kfree(hpriv); @@ -669,8 +669,8 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */ writel(port_ofs + PDC_DIMM_ATA_PKT, - (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); VPRINTK("submitted ofs 0x%x (%u), seq %u\n", port_ofs + PDC_DIMM_ATA_PKT, port_ofs + PDC_DIMM_ATA_PKT, @@ -747,8 +747,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4)); readl(mmio + PDC_20621_SEQCTL + (seq * 4)); writel(port_ofs + PDC_DIMM_ATA_PKT, - (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); - readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + (void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); + readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); } /* step two - execute ATA command */ @@ -1014,7 +1014,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, idx++; dist = ((long)(s32)(window_size - (offset + size))) >= 0 ? size : (long) (window_size - offset); - memcpy_toio((char *) (dimm_mmio + offset / 4), (char *) psource, dist); + memcpy_toio(dimm_mmio + offset / 4, psource, dist); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); @@ -1023,8 +1023,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, for (; (long) size >= (long) window_size ;) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, - window_size / 4); + memcpy_toio(dimm_mmio, psource, window_size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); psource += window_size; @@ -1035,7 +1034,7 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource, if (size) { writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR); readl(mmio + PDC_DIMM_WINDOW_CTLR); - memcpy_toio((char *) (dimm_mmio), (char *) psource, size / 4); + memcpy_toio(dimm_mmio, psource, size / 4); writel(0x01, mmio + PDC_GENERAL_CTLR); readl(mmio + PDC_GENERAL_CTLR); } -- GitLab From 9aa36e89b5677a98d951cf7bef6d99a0f93ea633 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH 0334/1519] [PATCH] iomem annotations (sata_sil) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index ba98a175ee3a..f6f0184e1ac8 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -289,7 +289,7 @@ static inline unsigned long sil_scr_addr(struct ata_port *ap, unsigned int sc_re static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void __iomem *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) return readl(mmio); return 0xffffffffU; @@ -297,7 +297,7 @@ static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg) static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - void *mmio = (void *) sil_scr_addr(ap, sc_reg); + void *mmio = (void __iomem *) sil_scr_addr(ap, sc_reg); if (mmio) writel(val, mmio); } -- GitLab From 307e4dc28ee255bf22b431f242f847c9d96fe3fa Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 06:46:02 +0100 Subject: [PATCH 0335/1519] [PATCH] iomem annotations (sata_vsc) Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_vsc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index cf94e0158a8d..877b9fda3965 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -86,7 +86,7 @@ static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -95,16 +95,16 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) { - unsigned long mask_addr; + void __iomem *mask_addr; u8 mask; - mask_addr = (unsigned long) ap->host_set->mmio_base + + mask_addr = ap->host_set->mmio_base + VSC_SATA_INT_MASK_OFFSET + ap->port_no; mask = readb(mask_addr); if (ctl & ATA_NIEN) @@ -283,7 +283,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d struct ata_probe_ent *probe_ent = NULL; unsigned long base; int pci_dev_busy = 0; - void *mmio_base; + void __iomem *mmio_base; int rc; if (!printed_version++) -- GitLab From d3f7bf4fa9626d371f26cd310477202628a8126a Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 21 Oct 2005 12:39:52 -0500 Subject: [PATCH 0336/1519] ieee80211 subsystem: * Use GFP mask on TX skb allocation. * Use the tx_headroom and reserve requested space. Signed-off-by: Michael Buesch Signed-off-by: James Ketrenos --- net/ieee80211/ieee80211_tx.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index f4f2a33973a7..fb4509032402 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -190,7 +190,7 @@ void ieee80211_txb_free(struct ieee80211_txb *txb) } static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, - gfp_t gfp_mask) + int headroom, gfp_t gfp_mask) { struct ieee80211_txb *txb; int i; @@ -204,11 +204,13 @@ static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, txb->frag_size = txb_size; for (i = 0; i < nr_frags; i++) { - txb->fragments[i] = dev_alloc_skb(txb_size); + txb->fragments[i] = __dev_alloc_skb(txb_size + headroom, + gfp_mask); if (unlikely(!txb->fragments[i])) { i--; break; } + skb_reserve(txb->fragments[i], headroom); } if (unlikely(i != nr_frags)) { while (i >= 0) @@ -384,7 +386,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) /* When we allocate the TXB we allocate enough space for the reserve * and full fragment bytes (bytes_per_frag doesn't include prefix, * postfix, header, FCS, etc.) */ - txb = ieee80211_alloc_txb(nr_frags, frag_size, GFP_ATOMIC); + txb = ieee80211_alloc_txb(nr_frags, frag_size, + ieee->tx_headroom, GFP_ATOMIC); if (unlikely(!txb)) { printk(KERN_WARNING "%s: Could not allocate TXB\n", ieee->dev->name); -- GitLab From 519a62bb8a0b0b383e6022cad6242cf63efc015c Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Thu, 20 Oct 2005 15:57:03 -0500 Subject: [PATCH 0337/1519] Update version ieee80211 stamp to 1.1.6 --- include/net/ieee80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index 58f62224e7ea..5e38dca1d082 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -29,7 +29,7 @@ #include /* ARRAY_SIZE */ #include -#define IEEE80211_VERSION "git-1.1.5" +#define IEEE80211_VERSION "git-1.1.6" #define IEEE80211_DATA_LEN 2304 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section -- GitLab From 11e29e21514517f3022a1f30998ac4c7b1197658 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 21 Oct 2005 18:46:32 -0400 Subject: [PATCH 0338/1519] libata: handle early device PIO modes correctly --- drivers/scsi/libata-core.c | 31 +++++++++++++++++++++++++++---- include/linux/ata.h | 13 +++++++++---- 2 files changed, 36 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 175d4646333d..09639e7aaa71 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1082,6 +1082,31 @@ static inline void ata_dump_id(struct ata_device *dev) dev->id[93]); } +/* + * Compute the PIO modes available for this device. This is not as + * trivial as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + */ + +static unsigned int ata_pio_modes(struct ata_device *adev) +{ + u16 modes; + + /* Usual case. Word 53 indicates word 88 is valid */ + if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) { + modes = adev->id[ATA_ID_PIO_MODES] & 0x03; + modes <<= 3; + modes |= 0x7; + return modes; + } + + /* If word 88 isn't valid then Word 51 holds the PIO timing number + for the maximum. Turn it into a mask and return it */ + modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + return modes; +} + /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -1215,10 +1240,8 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) xfer_modes = dev->id[ATA_ID_UDMA_MODES]; if (!xfer_modes) xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA; - if (!xfer_modes) { - xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3); - xfer_modes |= (0x7 << ATA_SHIFT_PIO); - } + if (!xfer_modes) + xfer_modes = ata_pio_modes(dev); ata_dump_id(dev); diff --git a/include/linux/ata.h b/include/linux/ata.h index 630908c9378b..33276d1d05d2 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -42,13 +42,18 @@ enum { ATA_SECT_SIZE = 512, ATA_ID_WORDS = 256, - ATA_ID_PROD_OFS = 27, - ATA_ID_FW_REV_OFS = 23, ATA_ID_SERNO_OFS = 10, - ATA_ID_MAJOR_VER = 80, - ATA_ID_PIO_MODES = 64, + ATA_ID_FW_REV_OFS = 23, + ATA_ID_PROD_OFS = 27, + ATA_ID_OLD_PIO_MODES = 51, + ATA_ID_FIELD_VALID = 53, ATA_ID_MWDMA_MODES = 63, + ATA_ID_PIO_MODES = 64, + ATA_ID_EIDE_DMA_MIN = 65, + ATA_ID_EIDE_PIO = 67, + ATA_ID_EIDE_PIO_IORDY = 68, ATA_ID_UDMA_MODES = 88, + ATA_ID_MAJOR_VER = 80, ATA_ID_PIO4 = (1 << 1), ATA_PCI_CTL_OFS = 2, -- GitLab From 452503f993feffe96e8cc9fbff4888b96e2c5e40 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 21 Oct 2005 19:01:32 -0400 Subject: [PATCH 0339/1519] Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 149 +++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 39 ++++++++++ 2 files changed, 188 insertions(+) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 09639e7aaa71..9269fd9b814f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1538,6 +1538,152 @@ void ata_port_disable(struct ata_port *ap) ap->flags |= ATA_FLAG_PORT_DISABLED; } +/* + * This mode timing computation functionality is ported over from + * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik + */ +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static const struct ata_timing ata_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + +/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + +/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + + { 0xFF } +}; + +#define ENOUGH(v,unit) (((v)-1)/(unit)+1) +#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) + +static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, + struct ata_timing *m, unsigned int what) +{ + if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +{ + const struct ata_timing *t; + + for (t = ata_timing; t->mode != speed; t++) + if (t->mode != 0xFF) + return NULL; + return t; +} + +int ata_timing_compute(struct ata_device *adev, unsigned short speed, + struct ata_timing *t, int T, int UT) +{ + const struct ata_timing *s; + struct ata_timing p; + + /* + * Find the mode. + */ + + if (!(s = ata_timing_find_mode(speed))) + return -EINVAL; + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MW_DMA cycle timing. + */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + memset(&p, 0, sizeof(p)); + if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; + else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; + } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; + } + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + + ata_timing_quantize(s, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T + * and some other commands. We have to ensure that the DMA cycle timing is + * slower/equal than the fastest PIO timing. + */ + + if (speed > XFER_PIO_4) { + ata_timing_compute(adev, adev->pio_mode, &p, T, UT); + ata_timing_merge(&p, t, t, ATA_TIMING_ALL); + } + + /* + * Lenghten active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} + static struct { unsigned int shift; u8 base; @@ -4764,6 +4910,9 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_timing_compute); +EXPORT_SYMBOL_GPL(ata_timing_merge); + #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_host_stop); diff --git a/include/linux/libata.h b/include/linux/libata.h index 0261c55f3483..0e214f8c8f9f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -388,6 +388,19 @@ struct ata_port_info { struct ata_port_operations *port_ops; }; +struct ata_timing { + unsigned short mode; /* ATA mode */ + unsigned short setup; /* t1 */ + unsigned short act8b; /* t2 for 8-bit I/O */ + unsigned short rec8b; /* t2i for 8-bit I/O */ + unsigned short cyc8b; /* t0 for 8-bit I/O */ + unsigned short active; /* t2 or tD */ + unsigned short recover; /* t2i or tK */ + unsigned short cycle; /* t0 */ + unsigned short udma; /* t2CYCTYP/2 */ +}; + +#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); @@ -451,6 +464,32 @@ extern int ata_std_bios_param(struct scsi_device *sdev, sector_t capacity, int geom[]); extern int ata_scsi_slave_config(struct scsi_device *sdev); +/* + * Timing helpers + */ +extern int ata_timing_compute(struct ata_device *, unsigned short, + struct ata_timing *, int, int); +extern void ata_timing_merge(const struct ata_timing *, + const struct ata_timing *, struct ata_timing *, + unsigned int); + +enum { + ATA_TIMING_SETUP = (1 << 0), + ATA_TIMING_ACT8B = (1 << 1), + ATA_TIMING_REC8B = (1 << 2), + ATA_TIMING_CYC8B = (1 << 3), + ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B | + ATA_TIMING_CYC8B, + ATA_TIMING_ACTIVE = (1 << 4), + ATA_TIMING_RECOVER = (1 << 5), + ATA_TIMING_CYCLE = (1 << 6), + ATA_TIMING_UDMA = (1 << 7), + ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B | + ATA_TIMING_REC8B | ATA_TIMING_CYC8B | + ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER | + ATA_TIMING_CYCLE | ATA_TIMING_UDMA, +}; + #ifdef CONFIG_PCI struct pci_bits { -- GitLab From 5658374766d9e0249bd04e9d62bdb8456b916b64 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:33:38 -0400 Subject: [PATCH 0340/1519] [PARISC] Convert parisc_device tree to use struct device klists Fix parse_tree_node. much more needs to be done to fix this file. Signed-off-by: Matthew Wilcox Make drivers.c compile based on a patch from Pat Mochel. From: Patrick Mochel Signed-off-by: Kyle McMartin Fix drivers.c to create new device tree nodes when no match is found. Signed-off-by: Richard Hirst Do a proper depth-first search returning parents before children, using the new klist infrastructure. Signed-off-by: Richard Hirst Fixed parisc_device traversal so that pdc_stable works again Fixed check_dev so it doesn't dereference a parisc_device until it has verified the bus type Signed-off-by: Randolph Chung Convert pa_dev->hpa from an unsigned long to a struct resource. Use insert_resource() instead of request_mem_region(). Request resources at bus walk time instead of driver probe time. Don't release the resources as we don't have any hotplug parisc_device support yet. Add parisc_pathname() to conveniently get the textual representation of the hwpath used in sysfs. Inline the remnants of claim_device() into its caller. Signed-off-by: Matthew Wilcox I noticed that some of the STI regions weren't showing up in iomem. Reading the STI spec indicated that all STI devices occupy at least 32MB. So check for STI HPAs and give them 32MB instead of 4kB. Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- arch/parisc/kernel/drivers.c | 273 ++++++++++++++++++++--------- drivers/parisc/gsc.c | 11 +- drivers/parisc/sba_iommu.c | 18 +- include/asm-parisc/parisc-device.h | 5 + 4 files changed, 216 insertions(+), 91 deletions(-) diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index d34bbe7ae0e3..988844a169e6 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -46,36 +46,51 @@ static struct device root = { .bus_id = "parisc", }; -#define for_each_padev(padev) \ - for (padev = next_dev(&root); padev != NULL; \ - padev = next_dev(&padev->dev)) +static inline int check_dev(struct device *dev) +{ + if (dev->bus == &parisc_bus_type) { + struct parisc_device *pdev; + pdev = to_parisc_device(dev); + return pdev->id.hw_type != HPHW_FAULTY; + } + return 1; +} + +static struct device * +parse_tree_node(struct device *parent, int index, struct hardware_path *modpath); -#define check_dev(padev) \ - (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev) +struct recurse_struct { + void * obj; + int (*fn)(struct device *, void *); +}; + +static int descend_children(struct device * dev, void * data) +{ + struct recurse_struct * recurse_data = (struct recurse_struct *)data; + + if (recurse_data->fn(dev, recurse_data->obj)) + return 1; + else + return device_for_each_child(dev, recurse_data, descend_children); +} /** - * next_dev - enumerates registered devices - * @dev: the previous device returned from next_dev + * for_each_padev - Iterate over all devices in the tree + * @fn: Function to call for each device. + * @data: Data to pass to the called function. * - * next_dev does a depth-first search of the tree, returning parents - * before children. Returns NULL when there are no more devices. + * This performs a depth-first traversal of the tree, calling the + * function passed for each node. It calls the function for parents + * before children. */ -static struct parisc_device *next_dev(struct device *dev) -{ - if (!list_empty(&dev->children)) { - dev = list_to_dev(dev->children.next); - return check_dev(to_parisc_device(dev)); - } - while (dev != &root) { - if (dev->node.next != &dev->parent->children) { - dev = list_to_dev(dev->node.next); - return to_parisc_device(dev); - } - dev = dev->parent; - } - - return NULL; +static int for_each_padev(int (*fn)(struct device *, void *), void * data) +{ + struct recurse_struct recurse_data = { + .obj = data, + .fn = fn, + }; + return device_for_each_child(&root, &recurse_data, descend_children); } /** @@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev) return 0; } -static void claim_device(struct parisc_driver *driver, struct parisc_device *dev) -{ - dev->driver = driver; - request_mem_region(dev->hpa, 0x1000, driver->name); -} - static int parisc_driver_probe(struct device *dev) { int rc; @@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev) rc = pa_drv->probe(pa_dev); - if(!rc) - claim_device(pa_drv, pa_dev); + if (!rc) + pa_dev->driver = pa_drv; return rc; } @@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev) struct parisc_driver *pa_drv = to_parisc_driver(dev->driver); if (pa_drv->remove) pa_drv->remove(pa_dev); - release_mem_region(pa_dev->hpa, 0x1000); return 0; } @@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(register_parisc_driver); + +struct match_count { + struct parisc_driver * driver; + int count; +}; + +static int match_and_count(struct device * dev, void * data) +{ + struct match_count * m = data; + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) { + if (match_device(m->driver, pdev)) + m->count++; + } + return 0; +} + /** * count_parisc_driver - count # of devices this driver would match * @driver: the PA-RISC driver to try @@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver); */ int count_parisc_driver(struct parisc_driver *driver) { - struct parisc_device *device; - int cnt = 0; + struct match_count m = { + .driver = driver, + .count = 0, + }; - for_each_padev(device) { - if (match_device(driver, device)) - cnt++; - } + for_each_padev(match_and_count, &m); - return cnt; + return m.count; } @@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver) } EXPORT_SYMBOL(unregister_parisc_driver); -static struct parisc_device *find_device_by_addr(unsigned long hpa) +struct find_data { + unsigned long hpa; + struct parisc_device * dev; +}; + +static int find_device(struct device * dev, void * data) { - struct parisc_device *dev; - for_each_padev(dev) { - if (dev->hpa == hpa) - return dev; + struct parisc_device * pdev = to_parisc_device(dev); + struct find_data * d = (struct find_data*)data; + + if (check_dev(dev)) { + if (pdev->hpa.start == d->hpa) { + d->dev = pdev; + return 1; + } } - return NULL; + return 0; +} + +static struct parisc_device *find_device_by_addr(unsigned long hpa) +{ + struct find_data d = { + .hpa = hpa, + }; + int ret; + + ret = for_each_padev(find_device, &d); + return ret ? d.dev : NULL; } /** @@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent) return dev; } +struct match_id_data { + char id; + struct parisc_device * dev; +}; + +static int match_by_id(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + struct match_id_data * d = data; + + if (pdev->hw_path == d->id) { + d->dev = pdev; + return 1; + } + return 0; +} + /** * alloc_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent) */ static struct parisc_device * alloc_tree_node(struct device *parent, char id) { - struct device *dev; - - list_for_each_entry(dev, &parent->children, node) { - struct parisc_device *padev = to_parisc_device(dev); - if (padev->hw_path == id) - return padev; - } - - return create_tree_node(id, parent); + struct match_id_data d = { + .id = id, + }; + if (device_for_each_child(parent, &d, match_by_id)) + return d.dev; + else + return create_tree_node(id, parent); } static struct parisc_device *create_parisc_device(struct hardware_path *modpath) @@ -439,10 +499,8 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - char p[64]; - print_pa_hwpath(dev, p); printk("Two devices have hardware path %s. Please file a bug with HP.\n" - "In the meantime, you could try rearranging your cards.\n", p); + "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev)); return NULL; } @@ -451,12 +509,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev->id.hversion_rev = iodc_data[1] & 0x0f; dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) | (iodc_data[5] << 8) | iodc_data[6]; - dev->hpa = hpa; + dev->hpa.name = parisc_pathname(dev); + dev->hpa.start = hpa; + if (hpa == 0xf4000000 || hpa == 0xf6000000 || + hpa == 0xf8000000 || hpa == 0xfa000000) { + dev->hpa.end = hpa + 0x01ffffff; + } else { + dev->hpa.end = hpa + 0xfff; + } + dev->hpa.flags = IORESOURCE_MEM; name = parisc_hardware_description(&dev->id); if (name) { strlcpy(dev->name, name, sizeof(dev->name)); } + /* Silently fail things like mouse ports which are subsumed within + * the keyboard controller + */ + if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa)) + printk("Unable to claim HPA %lx for device %s\n", + hpa, name); + return dev; } @@ -555,6 +628,33 @@ static int match_parisc_device(struct device *dev, int index, return (curr->hw_path == id); } +struct parse_tree_data { + int index; + struct hardware_path * modpath; + struct device * dev; +}; + +static int check_parent(struct device * dev, void * data) +{ + struct parse_tree_data * d = data; + + if (check_dev(dev)) { + if (dev->bus == &parisc_bus_type) { + if (match_parisc_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (is_pci_dev(dev)) { + if (match_pci_device(dev, d->index, d->modpath)) + d->dev = dev; + } else if (dev->bus == NULL) { + /* we are on a bus bridge */ + struct device *new = parse_tree_node(dev, d->index, d->modpath); + if (new) + d->dev = new; + } + } + return d->dev != NULL; +} + /** * parse_tree_node - returns a device entry in the iotree * @parent: the parent node in the tree @@ -568,24 +668,18 @@ static int match_parisc_device(struct device *dev, int index, static struct device * parse_tree_node(struct device *parent, int index, struct hardware_path *modpath) { - struct device *device; - - list_for_each_entry(device, &parent->children, node) { - if (device->bus == &parisc_bus_type) { - if (match_parisc_device(device, index, modpath)) - return device; - } else if (is_pci_dev(device)) { - if (match_pci_device(device, index, modpath)) - return device; - } else if (device->bus == NULL) { - /* we are on a bus bridge */ - struct device *new = parse_tree_node(device, index, modpath); - if (new) - return new; - } - } + struct parse_tree_data d = { + .index = index, + .modpath = modpath, + }; - return NULL; + struct recurse_struct recurse_data = { + .obj = &d, + .fn = check_parent, + }; + + device_for_each_child(parent, &recurse_data, descend_children); + return d.dev; } /** @@ -636,7 +730,7 @@ EXPORT_SYMBOL(device_to_hwpath); ((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT)) #define IS_LOWER_PORT(dev) \ - ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \ + ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \ & BC_PORT_MASK) == BC_LOWER_PORT) #define MAX_NATIVE_DEVICES 64 @@ -645,8 +739,8 @@ EXPORT_SYMBOL(device_to_hwpath); #define FLEX_MASK F_EXTEND(0xfffc0000) #define IO_IO_LOW offsetof(struct bc_module, io_io_low) #define IO_IO_HIGH offsetof(struct bc_module, io_io_high) -#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW) -#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH) +#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW) +#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH) static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high, struct device *parent); @@ -655,10 +749,10 @@ void walk_lower_bus(struct parisc_device *dev) { unsigned long io_io_low, io_io_high; - if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) + if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev)) return; - if(dev->id.hw_type == HPHW_IOA) { + if (dev->id.hw_type == HPHW_IOA) { io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16); io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET; } else { @@ -731,7 +825,7 @@ static void print_parisc_device(struct parisc_device *dev) print_pa_hwpath(dev, hw_path); printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }", - ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type, + ++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type, dev->id.hversion_rev, dev->id.hversion, dev->id.sversion); if (dev->num_addrs) { @@ -753,13 +847,20 @@ void init_parisc_bus(void) get_device(&root); } + +static int print_one_device(struct device * dev, void * data) +{ + struct parisc_device * pdev = to_parisc_device(dev); + + if (check_dev(dev)) + print_parisc_device(pdev); + return 0; +} + /** * print_parisc_devices - Print out a list of devices found in this system */ void print_parisc_devices(void) { - struct parisc_device *dev; - for_each_padev(dev) { - print_parisc_device(dev); - } + for_each_padev(print_one_device, NULL); } diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c index af5e02526a18..16d40f95978d 100644 --- a/drivers/parisc/gsc.c +++ b/drivers/parisc/gsc.c @@ -183,12 +183,20 @@ void gsc_asic_assign_irq(struct gsc_asic *asic, int local_irq, int *irqp) *irqp = irq; } +static struct device *next_device(struct klist_iter *i) +{ + struct klist_node * n = klist_next(i); + return n ? container_of(n, struct device, knode_parent) : NULL; +} + void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, void (*choose_irq)(struct parisc_device *, void *)) { struct device *dev; + struct klist_iter i; - list_for_each_entry(dev, &parent->dev.children, node) { + klist_iter_init(&parent->dev.klist_children, &i); + while ((dev = next_device(&i))) { struct parisc_device *padev = to_parisc_device(dev); /* work-around for 715/64 and others which have parent @@ -197,6 +205,7 @@ void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl, return gsc_fixup_irqs(padev, ctrl, choose_irq); choose_irq(padev, ctrl); } + klist_iter_exit(&i); } int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic) diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 82ea68b55df4..a8405f05fb5f 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1322,19 +1322,29 @@ sba_alloc_pdir(unsigned int pdir_size) return (void *) pdir_base; } +static struct device *next_device(struct klist_iter *i) +{ + struct klist_node * n = klist_next(i); + return n ? container_of(n, struct device, knode_parent) : NULL; +} + /* setup Mercury or Elroy IBASE/IMASK registers. */ -static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) +static void +setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) { - /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ + /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ extern void lba_set_iregs(struct parisc_device *, u32, u32); struct device *dev; + struct klist_iter i; - list_for_each_entry(dev, &sba->dev.children, node) { + klist_iter_init(&sba->dev.klist_children, &i); + while ((dev = next_device(&i))) { struct parisc_device *lba = to_parisc_device(dev); - int rope_num = (lba->hpa >> 13) & 0xf; + int rope_num = (lba->hpa.start >> 13) & 0xf; if (rope_num >> 3 == ioc_num) lba_set_iregs(lba, ioc->ibase, ioc->imask); } + klist_iter_exit(&i); } static void diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h index ef69ab4b17a9..cbde8b41c84b 100644 --- a/include/asm-parisc/parisc-device.h +++ b/include/asm-parisc/parisc-device.h @@ -39,6 +39,11 @@ struct parisc_driver { #define to_parisc_driver(d) container_of(d, struct parisc_driver, drv) #define parisc_parent(d) to_parisc_device(d->dev.parent) +static inline char *parisc_pathname(struct parisc_device *d) +{ + return d->dev.bus_id; +} + static inline void parisc_set_drvdata(struct parisc_device *d, void *p) { -- GitLab From bdad1f836ab1ca2b18a625222f63f630cfd14e41 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:36:23 -0400 Subject: [PATCH 0341/1519] [PARISC] Change the driver names so /sys/bus/parisc/drivers/ looks better Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver names. Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/input/keyboard/hilkbd.c | 2 +- drivers/input/serio/gscps2.c | 2 +- drivers/input/serio/hp_sdc.c | 2 +- drivers/net/lasi_82596.c | 2 +- drivers/parisc/asp.c | 2 +- drivers/parisc/ccio-dma.c | 2 +- drivers/parisc/dino.c | 4 ++-- drivers/parisc/eisa.c | 2 +- drivers/parisc/hppb.c | 2 +- drivers/parisc/lasi.c | 2 +- drivers/scsi/lasi700.c | 2 +- drivers/serial/mux.c | 2 +- 12 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index eecb77db0847..8aa81c9ac2f7 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -299,7 +299,7 @@ static struct parisc_device_id hil_tbl[] = { MODULE_DEVICE_TABLE(parisc, hil_tbl); static struct parisc_driver hil_driver = { - .name = "HIL", + .name = "hil", .id_table = hil_tbl, .probe = hil_init_chip, }; diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 897e4c12b642..4bad2810190c 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -444,7 +444,7 @@ static struct parisc_device_id gscps2_device_tbl[] = { }; static struct parisc_driver parisc_ps2_driver = { - .name = "GSC PS2", + .name = "gsc_ps2", .id_table = gscps2_device_tbl, .probe = gscps2_probe, .remove = gscps2_remove, diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 7629452dd64b..045b9a7a9dbb 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -764,7 +764,7 @@ MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl); static int __init hp_sdc_init_hppa(struct parisc_device *d); static struct parisc_driver hp_sdc_driver = { - .name = "HP SDC", + .name = "hp_sdc", .id_table = hp_sdc_tbl, .probe = hp_sdc_init_hppa, }; diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index 41bad07ac1ac..180e526a2049 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -1566,7 +1566,7 @@ static struct parisc_device_id lan_tbl[] = { MODULE_DEVICE_TABLE(parisc, lan_tbl); static struct parisc_driver lan_driver = { - .name = "Apricot", + .name = "lasi_82596", .id_table = lan_tbl, .probe = lan_init_chip, }; diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c index 388609967133..52f37b424318 100644 --- a/drivers/parisc/asp.c +++ b/drivers/parisc/asp.c @@ -126,7 +126,7 @@ static struct parisc_device_id asp_tbl[] = { }; struct parisc_driver asp_driver = { - .name = "Asp", + .name = "asp", .id_table = asp_tbl, .probe = asp_init_chip, }; diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 0e98a9d9834c..2bb1889c4c4f 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1251,7 +1251,7 @@ static struct parisc_device_id ccio_tbl[] = { static int ccio_probe(struct parisc_device *dev); static struct parisc_driver ccio_driver = { - .name = "U2:Uturn", + .name = "ccio", .id_table = ccio_tbl, .probe = ccio_probe, }; diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 2f2dbef2c3b7..8c61705e67a5 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -1027,9 +1027,9 @@ static struct parisc_device_id dino_tbl[] = { }; static struct parisc_driver dino_driver = { - .name = "Dino", + .name = "dino", .id_table = dino_tbl, - .probe = dino_driver_callback, + .probe = dino_probe, }; /* diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 043d47aea75b..0afeedddf535 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -397,7 +397,7 @@ static struct parisc_device_id eisa_tbl[] = { MODULE_DEVICE_TABLE(parisc, eisa_tbl); static struct parisc_driver eisa_driver = { - .name = "EISA Bus Adapter", + .name = "eisa_ba", .id_table = eisa_tbl, .probe = eisa_probe, }; diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c index e869c6020370..a6eae3e7c0cd 100644 --- a/drivers/parisc/hppb.c +++ b/drivers/parisc/hppb.c @@ -93,7 +93,7 @@ static struct parisc_device_id hppb_tbl[] = { }; static struct parisc_driver hppb_driver = { - .name = "Gecko Boa", + .name = "gecko_boa", .id_table = hppb_tbl, .probe = hppb_probe, }; diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c index cb84a4e84a2f..c776c372ae4e 100644 --- a/drivers/parisc/lasi.c +++ b/drivers/parisc/lasi.c @@ -233,7 +233,7 @@ static struct parisc_device_id lasi_tbl[] = { }; struct parisc_driver lasi_driver = { - .name = "Lasi", + .name = "lasi", .id_table = lasi_tbl, .probe = lasi_init_chip, }; diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 4cbb6187cc44..123f4933d8f5 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -168,7 +168,7 @@ lasi700_driver_remove(struct parisc_device *dev) } static struct parisc_driver lasi700_driver = { - .name = "Lasi SCSI", + .name = "lasi_scsi", .id_table = lasi700_ids, .probe = lasi700_probe, .remove = __devexit_p(lasi700_driver_remove), diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 189064607709..a12005b08bca 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -497,7 +497,7 @@ static struct parisc_device_id mux_tbl[] = { MODULE_DEVICE_TABLE(parisc, mux_tbl); static struct parisc_driver serial_mux_driver = { - .name = "Serial MUX", + .name = "serial_mux", .id_table = mux_tbl, .probe = mux_probe, }; -- GitLab From 53f01bba49938f115237fe43a261c31ac13ae5c6 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:36:40 -0400 Subject: [PATCH 0342/1519] [PARISC] Convert parisc_device to use struct resource for hpa Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by: Matthew Wilcox Fix up users of ->hpa to use ->hpa.start instead. Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- arch/parisc/kernel/perf.c | 12 +++++++----- arch/parisc/kernel/processor.c | 8 ++++---- drivers/input/keyboard/hilkbd.c | 4 ++-- drivers/input/serio/gscps2.c | 2 +- drivers/input/serio/hp_sdc.c | 6 +++--- drivers/net/lasi_82596.c | 7 ++++--- drivers/parisc/asp.c | 4 ++-- drivers/parisc/ccio-dma.c | 4 ++-- drivers/parisc/ccio-rm-dma.c | 2 +- drivers/parisc/dino.c | 6 +++--- drivers/parisc/eisa.c | 2 +- drivers/parisc/hppb.c | 8 ++++---- drivers/parisc/lasi.c | 2 +- drivers/parisc/lba_pci.c | 14 +++++++------- drivers/parisc/sba_iommu.c | 6 +++--- drivers/parisc/wax.c | 2 +- drivers/parport/parport_gsc.c | 5 +++-- drivers/scsi/lasi700.c | 2 +- drivers/scsi/zalon.c | 4 ++-- drivers/serial/8250_gsc.c | 5 +++-- drivers/serial/mux.c | 2 +- include/asm-parisc/parisc-device.h | 2 +- sound/parisc/harmony.c | 6 +++--- 23 files changed, 60 insertions(+), 55 deletions(-) diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index b3ad0a505b87..44670d6e06f4 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr) uint64_t *bptr; uint32_t dwords; uint32_t *intrigue_rdr; - uint64_t *intrigue_bitmask, tmp64, proc_hpa; + uint64_t *intrigue_bitmask, tmp64; + void __iomem *runway; struct rdr_tbl_ent *tentry; int i; @@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr) return -1; } - proc_hpa = cpu_device->hpa; + runway = ioremap(cpu_device->hpa.start, 4096); /* Merge intrigue bits into Runway STATUS 0 */ - tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful; - __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS); + tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful; + __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), + runway + RUNWAY_STATUS); /* Write RUNWAY DEBUG registers */ for (i = 0; i < 8; i++) { - __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i); + __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG); } return 0; diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 13b721cb9f55..4f5bbcf1f5a4 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev) * May get overwritten by PAT code. */ cpuid = boot_cpu_data.cpu_count; - txn_addr = dev->hpa; /* for legacy PDC */ + txn_addr = dev->hpa.start; /* for legacy PDC */ #ifdef __LP64__ if (is_pdc_pat()) { @@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev) * boot time (ie shutdown a CPU from an OS perspective). */ /* get the cpu number */ - status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa); + status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start); BUG_ON(PDC_OK != status); @@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev) printk(KERN_WARNING "IGNORING CPU at 0x%x," " cpu_slot_id > NR_CPUS" " (%ld > %d)\n", - dev->hpa, cpu_info.cpu_num, NR_CPUS); + dev->hpa.start, cpu_info.cpu_num, NR_CPUS); /* Ignore CPU since it will only crash */ boot_cpu_data.cpu_count--; return 1; @@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev) p->loops_per_jiffy = loops_per_jiffy; p->dev = dev; /* Save IODC data in case we need it */ - p->hpa = dev->hpa; /* save CPU hpa */ + p->hpa = dev->hpa.start; /* save CPU hpa */ p->cpuid = cpuid; /* save CPU id */ p->txn_addr = txn_addr; /* save CPU IRQ address */ #ifdef CONFIG_SMP diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index 8aa81c9ac2f7..e7a1e14f8b0c 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -278,11 +278,11 @@ static int __init hil_init_chip(struct parisc_device *dev) { if (!dev->irq) { - printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa); + printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start); return -ENODEV; } - hil_base = dev->hpa; + hil_base = dev->hpa.start; hil_irq = dev->irq; hil_dev.dev_id = dev; diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 4bad2810190c..9790d7169a53 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -331,7 +331,7 @@ static int __init gscps2_probe(struct parisc_device *dev) { struct gscps2port *ps2port; struct serio *serio; - unsigned long hpa = dev->hpa; + unsigned long hpa = dev->hpa.start; int ret; if (!dev->irq) diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 045b9a7a9dbb..a10348bb25e9 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -875,9 +875,9 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) hp_sdc.dev = d; hp_sdc.irq = d->irq; hp_sdc.nmi = d->aux_irq; - hp_sdc.base_io = d->hpa; - hp_sdc.data_io = d->hpa + 0x800; - hp_sdc.status_io = d->hpa + 0x801; + hp_sdc.base_io = d->hpa.start; + hp_sdc.data_io = d->hpa.start + 0x800; + hp_sdc.status_io = d->hpa.start + 0x801; return hp_sdc_init(); } diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index 180e526a2049..a63d8a317d9e 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -1528,17 +1528,18 @@ lan_init_chip(struct parisc_device *dev) if (!dev->irq) { printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n", - __FILE__, dev->hpa); + __FILE__, dev->hpa.start); return -ENODEV; } - printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa, dev->irq); + printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start, + dev->irq); netdevice = alloc_etherdev(0); if (!netdevice) return -ENOMEM; - netdevice->base_addr = dev->hpa; + netdevice->base_addr = dev->hpa.start; netdevice->irq = dev->irq; retval = i82596_probe(netdevice, &dev->dev); diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c index 52f37b424318..558420bc9f88 100644 --- a/drivers/parisc/asp.c +++ b/drivers/parisc/asp.c @@ -77,12 +77,12 @@ asp_init_chip(struct parisc_device *dev) struct gsc_irq gsc_irq; int ret; - asp.version = gsc_readb(dev->hpa + ASP_VER_OFFSET) & 0xf; + asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf; asp.name = (asp.version == 1) ? "Asp" : "Cutoff"; asp.hpa = ASP_INTERRUPT_ADDR; printk(KERN_INFO "%s version %d at 0x%lx found.\n", - asp.name, asp.version, dev->hpa); + asp.name, asp.version, dev->hpa.start); /* the IRQ ASP should use */ ret = -EBUSY; diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 2bb1889c4c4f..80d0927dc8a4 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1546,7 +1546,7 @@ static int ccio_probe(struct parisc_device *dev) ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn"; - printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa); + printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa.start); for (i = 0; i < ioc_count; i++) { ioc_p = &(*ioc_p)->next; @@ -1554,7 +1554,7 @@ static int ccio_probe(struct parisc_device *dev) *ioc_p = ioc; ioc->hw_path = dev->hw_path; - ioc->ioc_hpa = (struct ioa_registers *)dev->hpa; + ioc->ioc_regs = ioremap(dev->hpa.start, 4096); ccio_ioc_init(ioc); ccio_init_resources(ioc); hppa_dma_ops = &ccio_ops; diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c index 57e6385976e2..356b8357bccc 100644 --- a/drivers/parisc/ccio-rm-dma.c +++ b/drivers/parisc/ccio-rm-dma.c @@ -167,7 +167,7 @@ ccio_probe(struct parisc_device *dev) { printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME, dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn", - dev->hpa); + dev->hpa.start); /* ** FIXME - should check U2 registers to verify it's really running diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 8c61705e67a5..37820b0ae5ee 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -902,15 +902,15 @@ void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp); ** If so, initialize the chip appropriately (card-mode vs bridge mode). ** Much of the initialization is common though. */ -static int __init -dino_driver_callback(struct parisc_device *dev) +static int __init dino_probe(struct parisc_device *dev) { struct dino_device *dino_dev; // Dino specific control struct const char *version = "unknown"; char *name; int is_cujo = 0; struct pci_bus *bus; - + unsigned long hpa = dev->hpa.start; + name = "Dino"; if (is_card_dino(&dev->id)) { version = "3.x (card mode)"; diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 0afeedddf535..6362bf99eff6 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -315,7 +315,7 @@ static int __devinit eisa_probe(struct parisc_device *dev) char *name = is_mongoose(dev) ? "Mongoose" : "Wax"; printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", - name, dev->hpa); + name, dev->hpa.start); eisa_dev.hba.dev = dev; eisa_dev.hba.iommu = ccio_get_iommu(dev); diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c index a6eae3e7c0cd..5edf93f80757 100644 --- a/drivers/parisc/hppb.c +++ b/drivers/parisc/hppb.c @@ -68,14 +68,14 @@ static int hppb_probe(struct parisc_device *dev) memset(card->next, '\0', sizeof(struct hppb_card)); card = card->next; } - printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa); + printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start); - card->hpa = dev->hpa; + card->hpa = dev->hpa.start; card->mmio_region.name = "HP-PB Bus"; card->mmio_region.flags = IORESOURCE_MEM; - card->mmio_region.start = __raw_readl(dev->hpa + IO_IO_LOW); - card->mmio_region.end = __raw_readl(dev->hpa + IO_IO_HIGH) - 1; + card->mmio_region.start = gsc_readl(dev->hpa.start + IO_IO_LOW); + card->mmio_region.end = gsc_readl(dev->hpa.start + IO_IO_HIGH) - 1; status = ccio_request_resource(dev, &card->mmio_region); if(status < 0) { diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c index c776c372ae4e..a8c20396ffbe 100644 --- a/drivers/parisc/lasi.c +++ b/drivers/parisc/lasi.c @@ -175,7 +175,7 @@ lasi_init_chip(struct parisc_device *dev) return -ENOMEM; lasi->name = "Lasi"; - lasi->hpa = dev->hpa; + lasi->hpa = dev->hpa.start; /* Check the 4-bit (yes, only 4) version register */ lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf; diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 7fdd80b7eb47..5e495dcbc58a 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1288,7 +1288,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) ** Adjust "window" for this rope. */ rsize /= ROPES_PER_IOC; - r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa); + r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start); r->end = r->start + rsize; } else { r->end = r->start = 0; /* Not enabled. */ @@ -1458,7 +1458,7 @@ lba_driver_probe(struct parisc_device *dev) u32 func_class; void *tmp_obj; char *version; - void __iomem *addr = ioremap(dev->hpa, 4096); + void __iomem *addr = ioremap(dev->hpa.start, 4096); /* Read HW Rev First */ func_class = READ_REG32(addr + LBA_FCLASS); @@ -1476,7 +1476,7 @@ lba_driver_probe(struct parisc_device *dev) } printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n", - MODULE_NAME, version, func_class & 0xf, dev->hpa); + MODULE_NAME, version, func_class & 0xf, dev->hpa.start); if (func_class < 2) { printk(KERN_WARNING "Can't support LBA older than " @@ -1503,17 +1503,17 @@ lba_driver_probe(struct parisc_device *dev) * but for the mask for func_class. */ printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n", - MODULE_NAME, version, func_class & 0xff, dev->hpa); + MODULE_NAME, version, func_class & 0xff, dev->hpa.start); cfg_ops = &mercury_cfg_ops; } else { - printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa); + printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa.start); return -ENODEV; } /* ** Tell I/O SAPIC driver we have a IRQ handler/region. */ - tmp_obj = iosapic_register(dev->hpa + LBA_IOSAPIC_BASE); + tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE); /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't ** have an IRT entry will get NULL back from iosapic code. @@ -1635,7 +1635,7 @@ void __init lba_init(void) */ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) { - void __iomem * base_addr = ioremap(lba->hpa, 4096); + void __iomem * base_addr = ioremap(lba->hpa.start, 4096); imask <<= 2; /* adjust for hints - 2 more bits */ diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index a8405f05fb5f..6256ad365d0b 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -1600,7 +1600,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset) { - return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE); + return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE); } static void sba_hw_init(struct sba_device *sba_dev) @@ -1978,7 +1978,7 @@ sba_driver_callback(struct parisc_device *dev) u32 func_class; int i; char *version; - void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE); + void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE); sba_dump_ranges(sba_addr); @@ -2020,7 +2020,7 @@ sba_driver_callback(struct parisc_device *dev) } printk(KERN_INFO "%s found %s at 0x%lx\n", - MODULE_NAME, version, dev->hpa); + MODULE_NAME, version, dev->hpa.start); sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL); if (!sba_dev) { diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c index e547d7d024d8..17dce2adf7fe 100644 --- a/drivers/parisc/wax.c +++ b/drivers/parisc/wax.c @@ -81,7 +81,7 @@ wax_init_chip(struct parisc_device *dev) return -ENOMEM; wax->name = "wax"; - wax->hpa = dev->hpa; + wax->hpa = dev->hpa.start; wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */ printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa); diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index 02d72acd1c89..fde29a75f888 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -359,11 +359,12 @@ static int __devinit parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk("IRQ not found for parallel device at 0x%lx\n", dev->hpa); + printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n", + dev->hpa.start); return -ENODEV; } - port = dev->hpa + PARPORT_GSC_OFFSET; + port = dev->hpa.start + PARPORT_GSC_OFFSET; /* some older machines with ASP-chip don't support * the enhanced parport modes. diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 123f4933d8f5..8028418b3ad6 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -98,7 +98,7 @@ MODULE_DEVICE_TABLE(parisc, lasi700_ids); static int __init lasi700_probe(struct parisc_device *dev) { - unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET; + unsigned long base = dev->hpa.start + LASI_SCSI_CORE_OFFSET; struct NCR_700_Host_Parameters *hostdata; struct Scsi_Host *host; diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c index 5a51051e31f0..b131432c677d 100644 --- a/drivers/scsi/zalon.c +++ b/drivers/scsi/zalon.c @@ -88,7 +88,7 @@ zalon_probe(struct parisc_device *dev) struct gsc_irq gsc_irq; u32 zalon_vers; int error = -ENODEV; - void __iomem *zalon = ioremap(dev->hpa, 4096); + void __iomem *zalon = ioremap(dev->hpa.start, 4096); void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET; static int unit = 0; struct Scsi_Host *host; @@ -127,7 +127,7 @@ zalon_probe(struct parisc_device *dev) device.chip = zalon720_chip; device.host_id = 7; device.dev = &dev->dev; - device.slot.base = dev->hpa + GSC_SCSI_ZALON_OFFSET; + device.slot.base = dev->hpa.start + GSC_SCSI_ZALON_OFFSET; device.slot.base_v = io_port; device.slot.irq = dev->irq; device.differential = 2; diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 431aa5761a7a..abc5a0cfe243 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -42,12 +42,13 @@ serial_init_chip(struct parisc_device *dev) */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) { printk(KERN_INFO "Serial: device 0x%lx not configured.\n" - "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa); + "Enable support for Wax, Lasi, Asp or Dino.\n", + dev->hpa.start); } return -ENODEV; } - address = dev->hpa; + address = dev->hpa.start; if (dev->id.sversion != 0x8d) { address += 0x800; } diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index a12005b08bca..009ce83c8ef5 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -444,7 +444,7 @@ static int __init mux_probe(struct parisc_device *dev) unsigned long bytecnt; struct uart_port *port; - status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32); + status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); if(status != PDC_OK) { printk(KERN_ERR "Serial mux: Unable to read IODC.\n"); return 1; diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h index cbde8b41c84b..1d247e32a608 100644 --- a/include/asm-parisc/parisc-device.h +++ b/include/asm-parisc/parisc-device.h @@ -1,7 +1,7 @@ #include struct parisc_device { - unsigned long hpa; /* Hard Physical Address */ + struct resource hpa; /* Hard Physical Address */ struct parisc_device_id id; struct parisc_driver *driver; /* Driver for this device */ char name[80]; /* The hardware description */ diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index f560dd8cdb90..8b3ea26469ad 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -852,14 +852,14 @@ snd_harmony_create(snd_card_t *card, memset(&h->pbuf, 0, sizeof(h->pbuf)); memset(&h->cbuf, 0, sizeof(h->cbuf)); - h->hpa = padev->hpa; + h->hpa = padev->hpa.start; h->card = card; h->dev = padev; h->irq = padev->irq; - h->iobase = ioremap_nocache(padev->hpa, HARMONY_SIZE); + h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE); if (h->iobase == NULL) { printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n", - padev->hpa); + padev->hpa.start); err = -EBUSY; goto free_and_ret; } -- GitLab From 64908ad95c34f25849412d6d4735ac10f8fb6575 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:37:20 -0400 Subject: [PATCH 0343/1519] [PARISC] Update sba_iommu from parisc tree revert use of %%sr0 in fdc asm. Thanks to Joel Soete for pointing out this oversight. Signed-off-by: Grant Grundler 2.6.14-rc2-pa3 move "sync" outside the main loop that fills IO Pdir. Signed-off-by: Grant Grundler remove explicit use of sr0 in fdc ops. Thanks to Joel Soete for reminding me were I added those... Signed-off-by: Grant Grundler 2.6.14-rc2-pa2 - make SBA more anal about invalidating pdir entries Previous code cleared the valid flag a pdir entry but it did NOT guarantee this change was visible to the PDIR before writing the PCOM register. Ie the SBA could pick up a stale entry if the write happened to hit the SBA before the cacheline was flushed from the cache. Long term, I think I want to make this a compile time flag. Developement tree should enable anal pdir checking by default and Debian can disable it with either a CONFIG option or one-line patch. fdc/sync options can only negatively affect performance though I haven't measure how much yet. If someone can run netperf TCP_RR across gige and compare -pa1 and -pa2, that would be sufficient. Cleaned up the use of "fdc" to make sure it's using "kernel" space id (specify sr0 but maps to sr4-7). It seems a bit fragile to assume "sr1" gets loaded with KERNEL_SPACE which is how the code works today. Tested on 32 and 64-bit SMP kernels on j6k. Signed-off-by: Grant Grundler remove PDC_NARROW from SBA and document history of PDC_NARROW a bit. It will still show up in an older kernel's .config file. Signed-off-by: Grant Grundler if/ifdef cleanups from Joel Soete. Signed-off-by: Grant Grundler 2.6.12-rc4-pa2 fix 32-bit support for Astro platforms o Since my last SBA code change, SBA could allocate more than 1GB of IOVA space on Astro boxes with more than 1GB of RAM when running 32-bit kernel. This is bad since IOMMU can only talk to the first 1GB at most. Kudos to jejb for quickly spotting that bug. o jejb also noted SBA should *always* reject DMA masks > 32-bits since DMA-mapping.txt indicates caller should try again with 32-bits. o off-by-one error when comparing the mask to IOVA space size. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- drivers/parisc/sba_iommu.c | 140 ++++++++++++++++++++++++------------- 1 file changed, 91 insertions(+), 49 deletions(-) diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 6256ad365d0b..48591badd4ce 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -91,8 +91,8 @@ extern struct proc_dir_entry * proc_mckinley_root; #define DBG_RES(x...) #endif -#if defined(__LP64__) && !defined(CONFIG_PDC_NARROW) -/* "low end" PA8800 machines use ZX1 chipset */ +#if defined(CONFIG_64BIT) +/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */ #define ZX1_SUPPORT #endif @@ -231,7 +231,7 @@ struct ioc { spinlock_t res_lock; unsigned int res_bitshift; /* from the LEFT! */ unsigned int res_size; /* size of resource map in bytes */ -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT /* FIXME : DMA HINTs not used */ unsigned long hint_mask_pdir; /* bits used for DMA hints */ unsigned int hint_shift_pdir; @@ -294,7 +294,7 @@ static unsigned long piranha_bad_128k = 0; /* Looks nice and keeps the compiler happy */ #define SBA_DEV(d) ((struct sba_device *) (d)) -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT static int reserve_sba_gart = 1; #endif @@ -314,7 +314,7 @@ static int reserve_sba_gart = 1; #define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr) #define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr) -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define READ_REG(addr) READ_REG64(addr) #define WRITE_REG(value, addr) WRITE_REG64(value, addr) #else @@ -324,7 +324,7 @@ static int reserve_sba_gart = 1; #ifdef DEBUG_SBA_INIT -/* NOTE: When __LP64__ isn't defined, READ_REG64() is two 32-bit reads */ +/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */ /** * sba_dump_ranges - debugging only - print ranges assigned to this IOA @@ -364,7 +364,7 @@ static void sba_dump_tlb(void __iomem *hpa) #else #define sba_dump_ranges(x) #define sba_dump_tlb(x) -#endif +#endif /* DEBUG_SBA_INIT */ #ifdef ASSERT_PDIR_SANITY @@ -674,7 +674,7 @@ sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size) * ***************************************************************/ -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT #define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir) #endif @@ -743,9 +743,8 @@ sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, * (bit #61, big endian), we have to flush and sync every time * IO-PDIR is changed in Ike/Astro. */ - if (ioc_needs_fdc) { - asm volatile("fdc 0(%%sr1,%0)\n\tsync" : : "r" (pdir_ptr)); - } + if (ioc_needs_fdc) + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); } @@ -769,42 +768,57 @@ static SBA_INLINE void sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) { u32 iovp = (u32) SBA_IOVP(ioc,iova); - - /* Even though this is a big-endian machine, the entries - ** in the iopdir are little endian. That's why we clear the byte - ** at +7 instead of at +0. - */ - int off = PDIR_INDEX(iovp)*sizeof(u64)+7; + u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)]; #ifdef ASSERT_PDIR_SANITY - /* Assert first pdir entry is set */ - if (0x80 != (((u8 *) ioc->pdir_base)[off])) { + /* Assert first pdir entry is set. + ** + ** Even though this is a big-endian machine, the entries + ** in the iopdir are little endian. That's why we look at + ** the byte at +7 instead of at +0. + */ + if (0x80 != (((u8 *) pdir_ptr)[7])) { sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp)); } #endif - if (byte_cnt <= IOVP_SIZE) + if (byte_cnt > IOVP_SIZE) { - iovp |= IOVP_SHIFT; /* set "size" field for PCOM */ +#if 0 + unsigned long entries_per_cacheline = ioc_needs_fdc ? + L1_CACHE_ALIGN(((unsigned long) pdir_ptr)) + - (unsigned long) pdir_ptr; + : 262144; +#endif - /* - ** clear I/O PDIR entry "valid" bit - ** Do NOT clear the rest - save it for debugging. - ** We should only clear bits that have previously - ** been enabled. - */ - ((u8 *)(ioc->pdir_base))[off] = 0; - } else { - u32 t = get_order(byte_cnt) + PAGE_SHIFT; + /* set "size" field for PCOM */ + iovp |= get_order(byte_cnt) + PAGE_SHIFT; - iovp |= t; do { /* clear I/O Pdir entry "valid" bit first */ - ((u8 *)(ioc->pdir_base))[off] = 0; - off += sizeof(u64); + ((u8 *) pdir_ptr)[7] = 0; + if (ioc_needs_fdc) { + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); +#if 0 + entries_per_cacheline = L1_CACHE_SHIFT - 3; +#endif + } + pdir_ptr++; byte_cnt -= IOVP_SIZE; - } while (byte_cnt > 0); - } + } while (byte_cnt > IOVP_SIZE); + } else + iovp |= IOVP_SHIFT; /* set "size" field for PCOM */ + + /* + ** clear I/O PDIR entry "valid" bit. + ** We have to R/M/W the cacheline regardless how much of the + ** pdir entry that we clobber. + ** The rest of the entry would be useful for debugging if we + ** could dump core on HPMC. + */ + ((u8 *) pdir_ptr)[7] = 0; + if (ioc_needs_fdc) + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM); } @@ -819,18 +833,29 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) static int sba_dma_supported( struct device *dev, u64 mask) { struct ioc *ioc; + if (dev == NULL) { printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n"); BUG(); return(0); } - ioc = GET_IOC(dev); + /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, + * then fall back to 32-bit if that fails. + * We are just "encouraging" 32-bit DMA masks here since we can + * never allow IOMMU bypass unless we add special support for ZX1. + */ + if (mask > ~0U) + return 0; - /* check if mask is > than the largest IO Virt Address */ + ioc = GET_IOC(dev); - return((int) (mask >= (ioc->ibase + - (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) ))); + /* + * check if mask is >= than the current max IO Virt Address + * The max IO Virt address will *always* < 30 bits. + */ + return((int)(mask >= (ioc->ibase - 1 + + (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) ))); } @@ -898,11 +923,17 @@ sba_map_single(struct device *dev, void *addr, size_t size, size -= IOVP_SIZE; pdir_start++; } - /* form complete address */ + + /* force FDC ops in io_pdir_entry() to be visible to IOMMU */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + #ifdef ASSERT_PDIR_SANITY sba_check_pdir(ioc,"Check after sba_map_single()"); #endif spin_unlock_irqrestore(&ioc->res_lock, flags); + + /* form complete address */ return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG); } @@ -958,12 +989,19 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, d--; } ioc->saved_cnt = 0; + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ } #else /* DELAYED_RESOURCE_CNT == 0 */ sba_free_range(ioc, iova, size); + + /* If fdc's were issued, force fdc's to be visible now */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ #endif /* DELAYED_RESOURCE_CNT == 0 */ + spin_unlock_irqrestore(&ioc->res_lock, flags); /* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support. @@ -1106,6 +1144,10 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, */ filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry); + /* force FDC ops in io_pdir_entry() to be visible to IOMMU */ + if (ioc_needs_fdc) + asm volatile("sync" : : ); + #ifdef ASSERT_PDIR_SANITY if (sba_check_pdir(ioc,"Check after sba_map_sg()")) { @@ -1234,8 +1276,10 @@ sba_alloc_pdir(unsigned int pdir_size) unsigned long pdir_order = get_order(pdir_size); pdir_base = __get_free_pages(GFP_KERNEL, pdir_order); - if (NULL == (void *) pdir_base) - panic("sba_ioc_init() could not allocate I/O Page Table\n"); + if (NULL == (void *) pdir_base) { + panic("%s() could not allocate I/O Page Table\n", + __FUNCTION__); + } /* If this is not PA8700 (PCX-W2) ** OR newer than ver 2.2 @@ -1353,7 +1397,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) u32 iova_space_mask; u32 iova_space_size; int iov_order, tcnfg; -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT int agp_found = 0; #endif /* @@ -1390,7 +1434,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) DBG_INIT("%s() pdir %p size %x\n", __FUNCTION__, ioc->pdir_base, ioc->pdir_size); -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT ioc->hint_shift_pdir = iov_order + PAGE_SHIFT; ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT)); @@ -1414,7 +1458,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK); -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* ** Setting the upper bits makes checking for bypass addresses ** a little faster later on. @@ -1447,7 +1491,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) */ WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM); -#if SBA_AGP_SUPPORT +#ifdef SBA_AGP_SUPPORT /* ** If an AGP device is present, only use half of the IOV space ** for PCI DMA. Unfortunately we can't know ahead of time @@ -1499,11 +1543,9 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) if (iova_space_size < (1 << (20 - PAGE_SHIFT))) { iova_space_size = 1 << (20 - PAGE_SHIFT); } -#ifdef __LP64__ else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) { iova_space_size = 1 << (30 - PAGE_SHIFT); } -#endif /* ** iova space must be log2() in size. @@ -1529,7 +1571,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) DBG_INIT("%s() pdir %p size %x\n", __FUNCTION__, ioc->pdir_base, pdir_size); -#if SBA_HINT_SUPPORT +#ifdef SBA_HINT_SUPPORT /* FIXME : DMA HINTs not used */ ioc->hint_shift_pdir = iov_order + PAGE_SHIFT; ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT)); -- GitLab From 86a61ee9c9f3d8b632d29e86ac6610c43ebbb4f0 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:37:43 -0400 Subject: [PATCH 0344/1519] [PARISC] Update ccio-dma from parisc tree revert use of %%sr0 in fdc asm. Thanks to Joel Soete for pointing out this oversight. Signed-off-by: Grant Grundler 2.6.14-rc2-pa3 fdc/lci should be %r0 instead 0 for index (PA 1.1 compliance) From: Joel Soete Signed-off-by: Grant Grundler Explain why we need insert_resource() instead of request_resource(). Fundementally, this is more convoluted for ccio driver because of o legacy (HP-PB) transperant bridges. o support for MMIO behind card-mode Dino (PCI) o support for above bridges without ccio in the box SBA driver doesn't have to worry about those issues. Signed-off-by: Grant Grundler Use insert_resource instead of request_resource now that the subdevices will already have their resources claimed Signed-off-by: Matthew Wilcox re-enable use of "inline" for perf critical functions. Signed-off-by: Grant Grundler 2.6.12-rc4-pa5 fix sign extension of MMIO range Fixes the problem of claiming a range that is disabled on 64-bit kernel: ccio_init_resource() claimed CCIO bus address space (ffffffff00000000, ffffffffffffffff) also removes use of __FILE__. Tested on both 32 and 64-bit systems by Joel. From: Joel Soete Signed-off-by: Grant Grundler 2.6.12-rc1-pa7 incorrect BUG_ON in ccio ccio-dma.c line 1317 was preventing K-class with 4GB RAM from booting. Any ccio machine with >=2GB of RAM would have (incorrectly) triggered this. Signed-off-by: Grant Grundler Convert to ioremap and __raw_read/write Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/parisc/ccio-dma.c | 136 ++++++++++++++++++++++---------------- 1 file changed, 78 insertions(+), 58 deletions(-) diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 80d0927dc8a4..f1c442ab9102 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -100,9 +100,9 @@ #define DBG_RUN_SG(x...) #endif -#define CCIO_INLINE /* inline */ -#define WRITE_U32(value, addr) gsc_writel(value, (u32 *)(addr)) -#define READ_U32(addr) gsc_readl((u32 *)(addr)) +#define CCIO_INLINE inline +#define WRITE_U32(value, addr) __raw_writel(value, addr) +#define READ_U32(addr) __raw_readl(addr) #define U2_IOA_RUNWAY 0x580 #define U2_BC_GSC 0x501 @@ -115,28 +115,28 @@ struct ioa_registers { /* Runway Supervisory Set */ - volatile int32_t unused1[12]; - volatile uint32_t io_command; /* Offset 12 */ - volatile uint32_t io_status; /* Offset 13 */ - volatile uint32_t io_control; /* Offset 14 */ - volatile int32_t unused2[1]; + int32_t unused1[12]; + uint32_t io_command; /* Offset 12 */ + uint32_t io_status; /* Offset 13 */ + uint32_t io_control; /* Offset 14 */ + int32_t unused2[1]; /* Runway Auxiliary Register Set */ - volatile uint32_t io_err_resp; /* Offset 0 */ - volatile uint32_t io_err_info; /* Offset 1 */ - volatile uint32_t io_err_req; /* Offset 2 */ - volatile uint32_t io_err_resp_hi; /* Offset 3 */ - volatile uint32_t io_tlb_entry_m; /* Offset 4 */ - volatile uint32_t io_tlb_entry_l; /* Offset 5 */ - volatile uint32_t unused3[1]; - volatile uint32_t io_pdir_base; /* Offset 7 */ - volatile uint32_t io_io_low_hv; /* Offset 8 */ - volatile uint32_t io_io_high_hv; /* Offset 9 */ - volatile uint32_t unused4[1]; - volatile uint32_t io_chain_id_mask; /* Offset 11 */ - volatile uint32_t unused5[2]; - volatile uint32_t io_io_low; /* Offset 14 */ - volatile uint32_t io_io_high; /* Offset 15 */ + uint32_t io_err_resp; /* Offset 0 */ + uint32_t io_err_info; /* Offset 1 */ + uint32_t io_err_req; /* Offset 2 */ + uint32_t io_err_resp_hi; /* Offset 3 */ + uint32_t io_tlb_entry_m; /* Offset 4 */ + uint32_t io_tlb_entry_l; /* Offset 5 */ + uint32_t unused3[1]; + uint32_t io_pdir_base; /* Offset 7 */ + uint32_t io_io_low_hv; /* Offset 8 */ + uint32_t io_io_high_hv; /* Offset 9 */ + uint32_t unused4[1]; + uint32_t io_chain_id_mask; /* Offset 11 */ + uint32_t unused5[2]; + uint32_t io_io_low; /* Offset 14 */ + uint32_t io_io_high; /* Offset 15 */ }; /* @@ -226,7 +226,7 @@ struct ioa_registers { */ struct ioc { - struct ioa_registers *ioc_hpa; /* I/O MMU base address */ + struct ioa_registers __iomem *ioc_regs; /* I/O MMU base address */ u8 *res_map; /* resource map, bit == pdir entry */ u64 *pdir_base; /* physical base address */ u32 pdir_size; /* bytes, function of IOV Space size */ @@ -595,7 +595,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, ** Grab virtual index [0:11] ** Deposit virt_idx bits into I/O PDIR word */ - asm volatile ("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba)); + asm volatile ("lci %%r0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba)); asm volatile ("extru %1,19,12,%0" : "+r" (ci) : "r" (ci)); asm volatile ("depw %1,15,12,%0" : "+r" (pa) : "r" (ci)); @@ -613,7 +613,7 @@ ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, ** the real mode coherence index generation of U2, the PDIR entry ** must be flushed to memory to retain coherence." */ - asm volatile("fdc 0(%0)" : : "r" (pdir_ptr)); + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr)); asm volatile("sync"); } @@ -636,7 +636,7 @@ ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt) byte_cnt += chain_size; while(byte_cnt > chain_size) { - WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_hpa->io_command); + WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_regs->io_command); iovp += chain_size; byte_cnt -= chain_size; } @@ -684,7 +684,7 @@ ccio_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) ** Hopefully someone figures out how to patch (NOP) the ** FDC/SYNC out at boot time. */ - asm volatile("fdc 0(%0)" : : "r" (pdir_ptr[7])); + asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr[7])); iovp += IOVP_SIZE; byte_cnt -= IOVP_SIZE; @@ -1314,14 +1314,13 @@ ccio_ioc_init(struct ioc *ioc) ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64); - BUG_ON(ioc->pdir_size >= 4 * 1024 * 1024); /* max pdir size < 4MB */ + BUG_ON(ioc->pdir_size > 8 * 1024 * 1024); /* max pdir size <= 8MB */ /* Verify it's a power of two */ BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT)); - DBG_INIT("%s() hpa 0x%lx mem %luMB IOV %dMB (%d bits)\n", - __FUNCTION__, - ioc->ioc_hpa, + DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits)\n", + __FUNCTION__, ioc->ioc_regs, (unsigned long) num_physpages >> (20 - PAGE_SHIFT), iova_space_size>>20, iov_order + PAGE_SHIFT); @@ -1329,13 +1328,12 @@ ccio_ioc_init(struct ioc *ioc) ioc->pdir_base = (u64 *)__get_free_pages(GFP_KERNEL, get_order(ioc->pdir_size)); if(NULL == ioc->pdir_base) { - panic("%s:%s() could not allocate I/O Page Table\n", __FILE__, - __FUNCTION__); + panic("%s() could not allocate I/O Page Table\n", __FUNCTION__); } memset(ioc->pdir_base, 0, ioc->pdir_size); BUG_ON((((unsigned long)ioc->pdir_base) & PAGE_MASK) != (unsigned long)ioc->pdir_base); - DBG_INIT(" base %p", ioc->pdir_base); + DBG_INIT(" base %p\n", ioc->pdir_base); /* resource map size dictated by pdir_size */ ioc->res_size = (ioc->pdir_size / sizeof(u64)) >> 3; @@ -1344,8 +1342,7 @@ ccio_ioc_init(struct ioc *ioc) ioc->res_map = (u8 *)__get_free_pages(GFP_KERNEL, get_order(ioc->res_size)); if(NULL == ioc->res_map) { - panic("%s:%s() could not allocate resource map\n", __FILE__, - __FUNCTION__); + panic("%s() could not allocate resource map\n", __FUNCTION__); } memset(ioc->res_map, 0, ioc->res_size); @@ -1366,44 +1363,58 @@ ccio_ioc_init(struct ioc *ioc) ** Initialize IOA hardware */ WRITE_U32(CCIO_CHAINID_MASK << ioc->chainid_shift, - &ioc->ioc_hpa->io_chain_id_mask); + &ioc->ioc_regs->io_chain_id_mask); WRITE_U32(virt_to_phys(ioc->pdir_base), - &ioc->ioc_hpa->io_pdir_base); + &ioc->ioc_regs->io_pdir_base); /* ** Go to "Virtual Mode" */ - WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_hpa->io_control); + WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_regs->io_control); /* ** Initialize all I/O TLB entries to 0 (Valid bit off). */ - WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_m); - WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_l); + WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_m); + WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_l); for(i = 1 << CCIO_CHAINID_SHIFT; i ; i--) { WRITE_U32((CMD_TLB_DIRECT_WRITE | (i << ioc->chainid_shift)), - &ioc->ioc_hpa->io_command); + &ioc->ioc_regs->io_command); } } static void -ccio_init_resource(struct resource *res, char *name, unsigned long ioaddr) +ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr) { int result; res->parent = NULL; res->flags = IORESOURCE_MEM; - res->start = (unsigned long)(signed) __raw_readl(ioaddr) << 16; - res->end = (unsigned long)(signed) (__raw_readl(ioaddr + 4) << 16) - 1; + /* + * bracing ((signed) ...) are required for 64bit kernel because + * we only want to sign extend the lower 16 bits of the register. + * The upper 16-bits of range registers are hardcoded to 0xffff. + */ + res->start = (unsigned long)((signed) READ_U32(ioaddr) << 16); + res->end = (unsigned long)((signed) (READ_U32(ioaddr + 4) << 16) - 1); res->name = name; + /* + * Check if this MMIO range is disable + */ if (res->end + 1 == res->start) return; - result = request_resource(&iomem_resource, res); + + /* On some platforms (e.g. K-Class), we have already registered + * resources for devices reported by firmware. Some are children + * of ccio. + * "insert" ccio ranges in the mmio hierarchy (/proc/iomem). + */ + result = insert_resource(&iomem_resource, res); if (result < 0) { - printk(KERN_ERR "%s: failed to claim CCIO bus address space (%08lx,%08lx)\n", - __FILE__, res->start, res->end); + printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n", + __FUNCTION__, res->start, res->end); } } @@ -1414,9 +1425,8 @@ static void __init ccio_init_resources(struct ioc *ioc) sprintf(name, "GSC Bus [%d/]", ioc->hw_path); - ccio_init_resource(res, name, (unsigned long)&ioc->ioc_hpa->io_io_low); - ccio_init_resource(res + 1, name, - (unsigned long)&ioc->ioc_hpa->io_io_low_hv); + ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low); + ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv); } static int new_ioc_area(struct resource *res, unsigned long size, @@ -1427,7 +1437,12 @@ static int new_ioc_area(struct resource *res, unsigned long size, res->start = (max - size + 1) &~ (align - 1); res->end = res->start + size; - if (!request_resource(&iomem_resource, res)) + + /* We might be trying to expand the MMIO range to include + * a child device that has already registered it's MMIO space. + * Use "insert" instead of request_resource(). + */ + if (!insert_resource(&iomem_resource, res)) return 0; return new_ioc_area(res, size, min, max - size, align); @@ -1486,15 +1501,15 @@ int ccio_allocate_resource(const struct parisc_device *dev, if (!expand_ioc_area(parent, size, min, max, align)) { __raw_writel(((parent->start)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_low)); + &ioc->ioc_regs->io_io_low); __raw_writel(((parent->end)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_high)); + &ioc->ioc_regs->io_io_high); } else if (!expand_ioc_area(parent + 1, size, min, max, align)) { parent++; __raw_writel(((parent->start)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_low_hv)); + &ioc->ioc_regs->io_io_low_hv); __raw_writel(((parent->end)>>16) | 0xffff0000, - (unsigned long)&(ioc->ioc_hpa->io_io_high_hv)); + &ioc->ioc_regs->io_io_high_hv); } else { return -EBUSY; } @@ -1521,7 +1536,12 @@ int ccio_request_resource(const struct parisc_device *dev, return -EBUSY; } - return request_resource(parent, res); + /* "transparent" bus bridges need to register MMIO resources + * firmware assigned them. e.g. children of hppb.c (e.g. K-class) + * registered their resources in the PDC "bus walk" (See + * arch/parisc/kernel/inventory.c). + */ + return insert_resource(parent, res); } /** -- GitLab From 92b919fe46509820c639a08962cbf78bc8d227d9 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:38:23 -0400 Subject: [PATCH 0345/1519] [PARISC] Update dino from parisc tree Fix card-mode Dino crashes on 725 (and probably other Snake) systems. Dino was coming up in fatal mode after a warm reboot. Resetting Dino brings it out of fatal mode, so do that if the status register indicates we're in fatal mode. Since this was never observed on any later systems, I presume firmware does this for us on those. Signed-off-by: Matthew Wilcox Add debug statements in the cfg_read and cfg_write functions Fix debug statements from the IRQ overhaul last winter Rename dino_driver_callback() to dino_probe() Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/parisc/dino.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 37820b0ae5ee..5ab75334c579 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -178,6 +178,8 @@ static int dino_cfg_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base_addr = d->hba.base_addr; unsigned long flags; + DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where, + size); spin_lock_irqsave(&d->dinosaur_pen, flags); /* tell HW which CFG address */ @@ -211,6 +213,8 @@ static int dino_cfg_write(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base_addr = d->hba.base_addr; unsigned long flags; + DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where, + size); spin_lock_irqsave(&d->dinosaur_pen, flags); /* avoid address stepping feature */ @@ -295,7 +299,7 @@ static void dino_disable_irq(unsigned int irq) struct dino_device *dino_dev = irq_desc[irq].handler_data; int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq); - DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq); + DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq); /* Clear the matching bit in the IMR register */ dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq)); @@ -308,7 +312,7 @@ static void dino_enable_irq(unsigned int irq) int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq); u32 tmp; - DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq); + DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq); /* ** clear pending IRQ bits @@ -490,7 +494,7 @@ dino_card_setup(struct pci_bus *bus, void __iomem *base_addr) if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB))) break; } - DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %lx\n", + DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %p\n", i, res->start, base_addr + DINO_IO_ADDR_EN); __raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN); } @@ -683,6 +687,14 @@ static void __init dino_card_init(struct dino_device *dino_dev) { u32 brdg_feat = 0x00784e05; + unsigned long status; + + status = __raw_readl(dino_dev->hba.base_addr+DINO_IO_STATUS); + if (status & 0x0000ff80) { + __raw_writel(0x00000005, + dino_dev->hba.base_addr+DINO_IO_COMMAND); + udelay(1); + } __raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK); __raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN); @@ -928,11 +940,11 @@ static int __init dino_probe(struct parisc_device *dev) } } - printk("%s version %s found at 0x%lx\n", name, version, dev->hpa); + printk("%s version %s found at 0x%lx\n", name, version, hpa); - if (!request_mem_region(dev->hpa, PAGE_SIZE, name)) { + if (!request_mem_region(hpa, PAGE_SIZE, name)) { printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n", - dev->hpa); + hpa); return 1; } @@ -940,12 +952,12 @@ static int __init dino_probe(struct parisc_device *dev) if (is_cujo && dev->id.hversion_rev == 1) { #ifdef CONFIG_IOMMU_CCIO printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n"); - if (dev->hpa == (unsigned long)CUJO_RAVEN_ADDR) { + if (hpa == (unsigned long)CUJO_RAVEN_ADDR) { ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE); - } else if (dev->hpa == (unsigned long)CUJO_FIREHAWK_ADDR) { + } else if (hpa == (unsigned long)CUJO_FIREHAWK_ADDR) { ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE); } else { - printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", dev->hpa); + printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa); } #endif } else if (!is_cujo && !is_card_dino(&dev->id) && @@ -970,7 +982,7 @@ static int __init dino_probe(struct parisc_device *dev) memset(dino_dev, 0, sizeof(struct dino_device)); dino_dev->hba.dev = dev; - dino_dev->hba.base_addr = ioremap(dev->hpa, 4096); /* faster access */ + dino_dev->hba.base_addr = ioremap(hpa, 4096); dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */ spin_lock_init(&dino_dev->dinosaur_pen); dino_dev->hba.iommu = ccio_get_iommu(dev); -- GitLab From b2c1fe81df7471de9f7e2918877ac04ec9cde35f Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:39:43 -0400 Subject: [PATCH 0346/1519] [PARISC] Allow STI_CONSOLE access to some FONTS add || STI_CONSOLE to some of the basic FONTs. May need to get at least one of them to default to "Y" for parisc. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- drivers/video/console/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index eb83a7874c71..7e731691e2a9 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -110,7 +110,7 @@ config STI_CONSOLE config FONTS bool "Select compiled-in fonts" - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE help Say Y here if you would like to use fonts other than the default your frame buffer console usually use. @@ -123,7 +123,7 @@ config FONTS config FONT_8x8 bool "VGA 8x8 font" if FONTS - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one @@ -137,7 +137,7 @@ config FONT_8x8 config FONT_8x16 bool "VGA 8x16 font" if FONTS - depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || USB_SISUSBVGA_CON + depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one @@ -147,7 +147,7 @@ config FONT_8x16 config FONT_6x11 bool "Mac console 6x11 font (not supported by all drivers)" if FONTS - depends on FRAMEBUFFER_CONSOLE + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE default y if !SPARC32 && !SPARC64 && !FONTS && MAC help Small console font with Macintosh-style high-half glyphs. Some Mac -- GitLab From 896a375623c3643a3f189353e7d4828c48a7fdf8 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:40:07 -0400 Subject: [PATCH 0347/1519] [PARISC] Make sure use of RFI conforms to PA 2.0 and 1.1 arch docs 2.6.12-rc4-pa3 : first pass at making sure use of RFI conforms to PA 2.0 arch pages F-4 and F-5, PA 1.1 Arch page 3-19 and 3-20. The discussion revolves around all the rules for clearing PSW Q-bit. The hard part is meeting all the rules for "relied upon translation". .align directive is used to guarantee the critical sequence ends more than 8 instructions (32 bytes) from the end of page. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/entry.S | 51 ++++++++--------- arch/parisc/kernel/head.S | 47 +++------------ arch/parisc/kernel/pacache.S | 105 +++++++++++++++++----------------- arch/parisc/kernel/real2.S | 18 ++---- include/asm-parisc/assembly.h | 25 ++++++++ include/asm-parisc/psw.h | 51 +++++++++-------- include/asm-parisc/tlbflush.h | 9 +-- 7 files changed, 146 insertions(+), 160 deletions(-) diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index be0f07f2fa58..65a82c2645a7 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -30,9 +30,9 @@ * - save registers to kernel stack and handle in assembly or C */ +#include #include /* for LDREG/STREG defines */ #include -#include #include #include #include @@ -67,19 +67,22 @@ /* Switch to virtual mapping, trashing only %r1 */ .macro virt_map - rsm PSW_SM_Q,%r0 - tovirt_r1 %r29 - mfsp %sr7, %r1 - or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ - mtsp %r1, %sr3 + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ mtsp %r0, %sr4 mtsp %r0, %sr5 + mfsp %sr7, %r1 + or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ + mtsp %r1, %sr3 + tovirt_r1 %r29 + load32 KERNEL_PSW, %r1 + + rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ mtsp %r0, %sr6 mtsp %r0, %sr7 - load32 KERNEL_PSW, %r1 - mtctl %r1, %cr22 mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ + mtctl %r1, %ipsw load32 4f, %r1 mtctl %r1, %cr18 /* Set IIAOQ tail */ ldo 4(%r1), %r1 @@ -888,9 +891,6 @@ _switch_to_ret: * this way, then we will need to copy %sr3 in to PT_SR[3..7], and * adjust IASQ[0..1]. * - * Note that the following code uses a "relied upon translation". - * See the parisc ACD for details. The ssm is necessary due to a - * PCXT bug. */ .align 4096 @@ -985,24 +985,19 @@ intr_restore: rest_fp %r1 rest_general %r29 - /* Create a "relied upon translation" PA 2.0 Arch. F-5 */ - ssm 0,%r0 - nop - nop - nop - nop - nop - nop - nop + /* inverse of virt_map */ + pcxt_ssm_bug + rsm PSW_SM_QUIET,%r0 /* prepare for rfi */ tophys_r1 %r29 - rsm (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0 /* Restore space id's and special cr's from PT_REGS - * structure pointed to by r29 */ + * structure pointed to by r29 + */ rest_specials %r29 - /* Important: Note that rest_stack restores r29 - * last (we are using it)! It also restores r1 and r30. */ + /* IMPORTANT: rest_stack restores r29 last (we are using it)! + * It also restores r1 and r30. + */ rest_stack rfi @@ -1153,15 +1148,17 @@ intr_save: CMPIB=,n 6,%r26,skip_save_ior - /* save_specials left ipsw value in r8 for us to test */ mfctl %cr20, %r16 /* isr */ + nop /* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */ mfctl %cr21, %r17 /* ior */ + #ifdef __LP64__ /* * If the interrupted code was running with W bit off (32 bit), * clear the b bits (bits 0 & 1) in the ior. + * save_specials left ipsw value in r8 for us to test. */ extrd,u,*<> %r8,PSW_W_BIT,1,%r0 depdi 0,1,2,%r17 @@ -1487,10 +1484,10 @@ nadtlb_emulate: add,l %r1,%r24,%r1 /* doesn't affect c/b bits */ nadtlb_nullify: - mfctl %cr22,%r8 /* Get ipsw */ + mfctl %ipsw,%r8 ldil L%PSW_N,%r9 or %r8,%r9,%r8 /* Set PSW_N */ - mtctl %r8,%cr22 + mtctl %r8,%ipsw rfir nop diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 28405edf8448..2b8738576ec2 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -224,8 +224,6 @@ stext_pdc_ret: mtctl %r0,%cr12 mtctl %r0,%cr13 - /* Prepare to RFI! Man all the cannons! */ - /* Initialize the global data pointer */ loadgp @@ -254,46 +252,16 @@ $is_pa20: $install_iva: mtctl %r10,%cr14 -#ifdef __LP64__ - b aligned_rfi + b aligned_rfi /* Prepare to RFI! Man all the cannons! */ nop - .align 256 + .align 128 aligned_rfi: - ssm 0,0 - nop /* 1 */ - nop /* 2 */ - nop /* 3 */ - nop /* 4 */ - nop /* 5 */ - nop /* 6 */ - nop /* 7 */ - nop /* 8 */ -#endif - -#ifdef __LP64__ /* move to psw.h? */ -#define PSW_BITS PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R -#else -#define PSW_BITS PSW_SM_Q -#endif - -$rfi: - /* turn off troublesome PSW bits */ - rsm PSW_BITS,%r0 + pcxt_ssm_bug - /* kernel PSW: - * - no interruptions except HPMC and TOC (which are handled by PDC) - * - Q bit set (IODC / PDC interruptions) - * - big-endian - * - virtually mapped - */ - load32 KERNEL_PSW,%r10 - mtctl %r10,%ipsw + rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */ + /* Don't need NOPs, have 8 compliant insn before rfi */ - /* Set the space pointers for the post-RFI world - ** Clear the two-level IIA Space Queue, effectively setting - ** Kernel space. - */ mtctl %r0,%cr17 /* Clear IIASQ tail */ mtctl %r0,%cr17 /* Clear IIASQ head */ @@ -301,8 +269,11 @@ $rfi: mtctl %r11,%cr18 /* IIAOQ head */ ldo 4(%r11),%r11 mtctl %r11,%cr18 /* IIAOQ tail */ + + load32 KERNEL_PSW,%r10 + mtctl %r10,%ipsw - /* Jump to hyperspace */ + /* Jump through hyperspace to Virt Mode */ rfi nop diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 77e03bc0f935..71ade44c4618 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -40,8 +40,8 @@ .level 2.0 #endif -#include #include +#include #include #include @@ -62,32 +62,23 @@ flush_tlb_all_local: * to happen in real mode with all interruptions disabled. */ - /* - * Once again, we do the rfi dance ... some day we need examine - * all of our uses of this type of code and see what can be - * consolidated. - */ - - rsm PSW_SM_I, %r19 /* relied upon translation! PA 2.0 Arch. F-5 */ + /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */ + rsm PSW_SM_I, %r19 /* save I-bit state */ + load32 PA(1f), %r1 nop nop nop nop nop - nop - nop - - rsm PSW_SM_Q, %r0 /* Turn off Q bit to load iia queue */ - ldil L%REAL_MODE_PSW, %r1 - ldo R%REAL_MODE_PSW(%r1), %r1 - mtctl %r1, %cr22 + + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%PA(1f), %r1 - ldo R%PA(1f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %ipsw rfi nop @@ -178,29 +169,36 @@ fdtonemiddle: /* Loop if LOOP = 1 */ ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */ add %r21, %r20, %r20 /* increment space */ -fdtdone: - /* Switch back to virtual mode */ +fdtdone: + /* + * Switch back to virtual mode + */ + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 + load32 2f, %r1 + nop + nop + nop + nop + nop - rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ - ldil L%KERNEL_PSW, %r1 - ldo R%KERNEL_PSW(%r1), %r1 - or %r1, %r19, %r1 /* Set I bit if set on entry */ - mtctl %r1, %cr22 + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%(2f), %r1 - ldo R%(2f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + or %r1, %r19, %r1 /* I-bit to state on entry */ + mtctl %r1, %ipsw /* restore I-bit (entire PSW) */ rfi nop 2: bv %r0(%r2) nop - .exit + .exit .procend .export flush_instruction_cache_local,code @@ -238,7 +236,7 @@ fioneloop: /* Loop if LOOP = 1 */ fisync: sync - mtsm %r22 + mtsm %r22 /* restore I-bit */ bv %r0(%r2) nop .exit @@ -281,7 +279,7 @@ fdoneloop: /* Loop if LOOP = 1 */ fdsync: syncdma sync - mtsm %r22 + mtsm %r22 /* restore I-bit */ bv %r0(%r2) nop .exit @@ -988,11 +986,12 @@ flush_kernel_icache_range_asm: bv %r0(%r2) nop .exit - .procend - .align 128 - + /* align should cover use of rfi in disable_sr_hashing_asm and + * srdis_done. + */ + .align 256 .export disable_sr_hashing_asm,code disable_sr_hashing_asm: @@ -1000,28 +999,26 @@ disable_sr_hashing_asm: .callinfo NO_CALLS .entry - /* Switch to real mode */ - - ssm 0, %r0 /* relied upon translation! */ - nop - nop + /* + * Switch to real mode + */ + /* pcxt_ssm_bug */ + rsm PSW_SM_I, %r0 + load32 PA(1f), %r1 nop nop nop nop nop - - rsm (PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */ - ldil L%REAL_MODE_PSW, %r1 - ldo R%REAL_MODE_PSW(%r1), %r1 - mtctl %r1, %cr22 + + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%PA(1f), %r1 - ldo R%PA(1f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 REAL_MODE_PSW, %r1 + mtctl %r1, %ipsw rfi nop @@ -1053,27 +1050,31 @@ srdis_pcxl: srdis_pa20: - /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */ + /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */ .word 0x144008bc /* mfdiag %dr2, %r28 */ depdi 0, 54,1, %r28 /* clear DIAG_SPHASH_ENAB (bit 54) */ .word 0x145c1840 /* mtdiag %r28, %dr2 */ -srdis_done: +srdis_done: /* Switch back to virtual mode */ + rsm PSW_SM_I, %r0 /* prep to load iia queue */ + load32 2f, %r1 + nop + nop + nop + nop + nop - rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */ - ldil L%KERNEL_PSW, %r1 - ldo R%KERNEL_PSW(%r1), %r1 - mtctl %r1, %cr22 + rsm PSW_SM_Q, %r0 /* prep to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - ldil L%(2f), %r1 - ldo R%(2f)(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ + load32 KERNEL_PSW, %r1 + mtctl %r1, %ipsw rfi nop diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 8dd5defb7316..2310fc1b06a9 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -7,8 +7,8 @@ * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com) * */ -#include #include +#include .section .bss .export real_stack @@ -147,20 +147,17 @@ restore_control_regs: .text rfi_virt2real: /* switch to real mode... */ - ssm 0,0 /* See "relied upon translation" */ - nop /* PA 2.0 Arch. F-5 */ - nop - nop + rsm PSW_SM_I,%r0 + load32 PA(rfi_v2r_1), %r1 nop nop nop nop nop - rsm (PSW_SM_Q|PSW_SM_I),%r0 /* disable Q & I bits to load iia queue */ + rsm PSW_SM_Q,%r0 /* disable Q & I bits to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - load32 PA(rfi_v2r_1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ @@ -184,10 +181,8 @@ rfi_v2r_1: .text .align 128 rfi_real2virt: - ssm 0,0 /* See "relied upon translation" */ - nop /* PA 2.0 Arch. F-5 */ - nop - nop + rsm PSW_SM_I,%r0 + load32 (rfi_r2v_1), %r1 nop nop nop @@ -197,7 +192,6 @@ rfi_real2virt: rsm PSW_SM_Q,%r0 /* disable Q bit to load iia queue */ mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ - load32 (rfi_r2v_1), %r1 mtctl %r1, %cr18 /* IIAOQ head */ ldo 4(%r1), %r1 mtctl %r1, %cr18 /* IIAOQ tail */ diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h index 30b023411fef..b24a99e3ef9c 100644 --- a/include/asm-parisc/assembly.h +++ b/include/asm-parisc/assembly.h @@ -450,5 +450,30 @@ REST_CR (%cr22, PT_PSW (\regs)) .endm + + /* First step to create a "relied upon translation" + * See PA 2.0 Arch. page F-4 and F-5. + * + * The ssm was originally necessary due to a "PCxT bug". + * But someone decided it needed to be added to the architecture + * and this "feature" went into rev3 of PA-RISC 1.1 Arch Manual. + * It's been carried forward into PA 2.0 Arch as well. :^( + * + * "ssm 0,%r0" is a NOP with side effects (prefetch barrier). + * rsm/ssm prevents the ifetch unit from speculatively fetching + * instructions past this line in the code stream. + * PA 2.0 processor will single step all insn in the same QUAD (4 insn). + */ + .macro pcxt_ssm_bug + rsm PSW_SM_I,%r0 + nop /* 1 */ + nop /* 2 */ + nop /* 3 */ + nop /* 4 */ + nop /* 5 */ + nop /* 6 */ + nop /* 7 */ + .endm + #endif /* __ASSEMBLY__ */ #endif diff --git a/include/asm-parisc/psw.h b/include/asm-parisc/psw.h index 51323029f377..4334d6ca2add 100644 --- a/include/asm-parisc/psw.h +++ b/include/asm-parisc/psw.h @@ -1,4 +1,7 @@ #ifndef _PARISC_PSW_H + +#include + #define PSW_I 0x00000001 #define PSW_D 0x00000002 #define PSW_P 0x00000004 @@ -9,6 +12,16 @@ #define PSW_G 0x00000040 /* PA1.x only */ #define PSW_O 0x00000080 /* PA2.0 only */ +/* ssm/rsm instructions number PSW_W and PSW_E differently */ +#define PSW_SM_I PSW_I /* Enable External Interrupts */ +#define PSW_SM_D PSW_D +#define PSW_SM_P PSW_P +#define PSW_SM_Q PSW_Q /* Enable Interrupt State Collection */ +#define PSW_SM_R PSW_R /* Enable Recover Counter Trap */ +#define PSW_SM_W 0x200 /* PA2.0 only : Enable Wide Mode */ + +#define PSW_SM_QUIET PSW_SM_R+PSW_SM_Q+PSW_SM_P+PSW_SM_D+PSW_SM_I + #define PSW_CB 0x0000ff00 #define PSW_M 0x00010000 @@ -30,33 +43,21 @@ #define PSW_Z 0x40000000 /* PA1.x only */ #define PSW_Y 0x80000000 /* PA1.x only */ -#ifdef __LP64__ -#define PSW_HI_CB 0x000000ff /* PA2.0 only */ +#ifdef CONFIG_64BIT +# define PSW_HI_CB 0x000000ff /* PA2.0 only */ #endif -/* PSW bits to be used with ssm/rsm */ -#define PSW_SM_I 0x1 -#define PSW_SM_D 0x2 -#define PSW_SM_P 0x4 -#define PSW_SM_Q 0x8 -#define PSW_SM_R 0x10 -#define PSW_SM_F 0x20 -#define PSW_SM_G 0x40 -#define PSW_SM_O 0x80 -#define PSW_SM_E 0x100 -#define PSW_SM_W 0x200 - -#ifdef __LP64__ -# define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I) -# define KERNEL_PSW (PSW_W | PSW_C | PSW_Q | PSW_P | PSW_D) -# define REAL_MODE_PSW (PSW_W | PSW_Q) -# define USER_PSW_MASK (PSW_W | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB) -# define USER_PSW_HI_MASK (PSW_HI_CB) -#else -# define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I) -# define KERNEL_PSW (PSW_C | PSW_Q | PSW_P | PSW_D) -# define REAL_MODE_PSW (PSW_Q) -# define USER_PSW_MASK (PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB) +#ifdef CONFIG_64BIT +# define USER_PSW_HI_MASK PSW_HI_CB +# define WIDE_PSW PSW_W +#else +# define WIDE_PSW 0 #endif +/* Used when setting up for rfi */ +#define KERNEL_PSW (WIDE_PSW | PSW_C | PSW_Q | PSW_P | PSW_D) +#define REAL_MODE_PSW (WIDE_PSW | PSW_Q) +#define USER_PSW_MASK (WIDE_PSW | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB) +#define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I) + #endif diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h index eb27b78930e8..efbb2d8625b1 100644 --- a/include/asm-parisc/tlbflush.h +++ b/include/asm-parisc/tlbflush.h @@ -64,29 +64,26 @@ static inline void flush_tlb_range(struct vm_area_struct *vma, { unsigned long npages; - npages = ((end - (start & PAGE_MASK)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - if (npages >= 512) /* XXX arbitrary, should be tuned */ + if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */ flush_tlb_all(); else { mtsp(vma->vm_mm->context,1); + purge_tlb_start(); if (split_tlb) { - purge_tlb_start(); while (npages--) { pdtlb(start); pitlb(start); start += PAGE_SIZE; } - purge_tlb_end(); } else { - purge_tlb_start(); while (npages--) { pdtlb(start); start += PAGE_SIZE; } - purge_tlb_end(); } + purge_tlb_end(); } } -- GitLab From 04d472dc83388c59deb6241e9aed841926aa1c8c Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:40:24 -0400 Subject: [PATCH 0348/1519] [PARISC] Move pa_tlb_lock to tlb_flush.h move pa_tlb_lock and it's primary consumers to tlb_flush.h Future step will be to move spinlock_t definition out of system.h. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- include/asm-parisc/system.h | 19 ------------------- include/asm-parisc/tlbflush.h | 20 ++++++++++++++++++++ 2 files changed, 20 insertions(+), 19 deletions(-) diff --git a/include/asm-parisc/system.h b/include/asm-parisc/system.h index 26ff844a21c1..a25e9dcd2e79 100644 --- a/include/asm-parisc/system.h +++ b/include/asm-parisc/system.h @@ -164,25 +164,6 @@ static inline void set_eiem(unsigned long val) #endif #define KERNEL_START (0x10100000 - 0x1000) - -/* This is for the serialisation of PxTLB broadcasts. At least on the - * N class systems, only one PxTLB inter processor broadcast can be - * active at any one time on the Merced bus. This tlb purge - * synchronisation is fairly lightweight and harmless so we activate - * it on all SMP systems not just the N class. */ -#ifdef CONFIG_SMP -extern spinlock_t pa_tlb_lock; - -#define purge_tlb_start(x) spin_lock(&pa_tlb_lock) -#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock) - -#else - -#define purge_tlb_start(x) do { } while(0) -#define purge_tlb_end(x) do { } while (0) - -#endif - #define arch_align_stack(x) (x) #endif diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h index efbb2d8625b1..84af4ab1fe51 100644 --- a/include/asm-parisc/tlbflush.h +++ b/include/asm-parisc/tlbflush.h @@ -7,6 +7,26 @@ #include #include + +/* This is for the serialisation of PxTLB broadcasts. At least on the + * N class systems, only one PxTLB inter processor broadcast can be + * active at any one time on the Merced bus. This tlb purge + * synchronisation is fairly lightweight and harmless so we activate + * it on all SMP systems not just the N class. */ +#ifdef CONFIG_SMP +extern spinlock_t pa_tlb_lock; + +#define purge_tlb_start(x) spin_lock(&pa_tlb_lock) +#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock) + +#else + +#define purge_tlb_start(x) do { } while(0) +#define purge_tlb_end(x) do { } while (0) + +#endif + + extern void flush_tlb_all(void); /* -- GitLab From 14e256c107304367eff401d20f2ab9fa72e33136 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:41:25 -0400 Subject: [PATCH 0349/1519] [PARISC] Update spinlocks from parisc tree Neaten up the CONFIG_PA20 ifdefs More merge fixes, this time for SMP Signed-off-by: Matthew Wilcox Prettify the CONFIG_DEBUG_SPINLOCK __SPIN_LOCK_UNLOCKED initializers. Clean up some warnings with CONFIG_DEBUG_SPINLOCK enabled. Fix build with spinlock debugging turned on. Patch is cleaner like this, too. Remove mandatory 16-byte alignment requirement on PA2.0 processors by using the ldcw,CO completer. Provides a nice insn savings. Signed-off-by: Kyle McMartin --- include/asm-parisc/spinlock.h | 5 ----- include/asm-parisc/spinlock_types.h | 8 ++++++-- include/asm-parisc/system.h | 31 ++++++++++++++++++++++------- 3 files changed, 30 insertions(+), 14 deletions(-) diff --git a/include/asm-parisc/spinlock.h b/include/asm-parisc/spinlock.h index 43eaa6e742e0..7c3f406a746a 100644 --- a/include/asm-parisc/spinlock.h +++ b/include/asm-parisc/spinlock.h @@ -5,11 +5,6 @@ #include #include -/* Note that PA-RISC has to use `1' to mean unlocked and `0' to mean locked - * since it only has load-and-zero. Moreover, at least on some PA processors, - * the semaphore address has to be 16-byte aligned. - */ - static inline int __raw_spin_is_locked(raw_spinlock_t *x) { volatile unsigned int *a = __ldcw_align(x); diff --git a/include/asm-parisc/spinlock_types.h b/include/asm-parisc/spinlock_types.h index 785bba822fbf..d6b479bdb886 100644 --- a/include/asm-parisc/spinlock_types.h +++ b/include/asm-parisc/spinlock_types.h @@ -6,11 +6,15 @@ #endif typedef struct { +#ifdef CONFIG_PA20 + volatile unsigned int slock; +# define __RAW_SPIN_LOCK_UNLOCKED { 1 } +#else volatile unsigned int lock[4]; +# define __RAW_SPIN_LOCK_UNLOCKED { { 1, 1, 1, 1 } } +#endif } raw_spinlock_t; -#define __RAW_SPIN_LOCK_UNLOCKED { { 1, 1, 1, 1 } } - typedef struct { raw_spinlock_t lock; volatile int counter; diff --git a/include/asm-parisc/system.h b/include/asm-parisc/system.h index a25e9dcd2e79..f3928d3a80cb 100644 --- a/include/asm-parisc/system.h +++ b/include/asm-parisc/system.h @@ -138,13 +138,7 @@ static inline void set_eiem(unsigned long val) #define set_wmb(var, value) do { var = value; wmb(); } while (0) -/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */ -#define __ldcw(a) ({ \ - unsigned __ret; \ - __asm__ __volatile__("ldcw 0(%1),%0" : "=r" (__ret) : "r" (a)); \ - __ret; \ -}) - +#ifndef CONFIG_PA20 /* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data, and GCC only guarantees 8-byte alignment for stack locals, we can't be assured of 16-byte alignment for atomic lock data even if we @@ -152,12 +146,35 @@ static inline void set_eiem(unsigned long val) we use a struct containing an array of four ints for the atomic lock type and dynamically select the 16-byte aligned int from the array for the semaphore. */ + #define __PA_LDCW_ALIGNMENT 16 #define __ldcw_align(a) ({ \ unsigned long __ret = (unsigned long) &(a)->lock[0]; \ __ret = (__ret + __PA_LDCW_ALIGNMENT - 1) & ~(__PA_LDCW_ALIGNMENT - 1); \ (volatile unsigned int *) __ret; \ }) +#define LDCW "ldcw" + +#else /*CONFIG_PA20*/ +/* From: "Jim Hull" + I've attached a summary of the change, but basically, for PA 2.0, as + long as the ",CO" (coherent operation) completer is specified, then the + 16-byte alignment requirement for ldcw and ldcd is relaxed, and instead + they only require "natural" alignment (4-byte for ldcw, 8-byte for + ldcd). */ + +#define __PA_LDCW_ALIGNMENT 4 +#define __ldcw_align(a) ((volatile unsigned int *)a) +#define LDCW "ldcw,co" + +#endif /*!CONFIG_PA20*/ + +/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */ +#define __ldcw(a) ({ \ + unsigned __ret; \ + __asm__ __volatile__(LDCW " 0(%1),%0" : "=r" (__ret) : "r" (a)); \ + __ret; \ +}) #ifdef CONFIG_SMP # define __lock_aligned __attribute__((__section__(".data.lock_aligned"))) -- GitLab From 951a0150135c46c7791d68e0d1112900d99302d7 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:41:49 -0400 Subject: [PATCH 0350/1519] [PARISC] Reorganize sticore probe routine to be a little less convoluted Fix some whitespace issues Reorganise parisc_device probe routine to be a little less convoluted Use ->hpa.start instead of ->hpa Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/video/console/sticore.c | 126 +++++++++++++++----------------- 1 file changed, 60 insertions(+), 66 deletions(-) diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index d940f605acb6..a7bcd17112c0 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -511,12 +511,12 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) struct sti_cooked_font *cooked_font; if (!fbfont_name || !strlen(fbfont_name)) - return NULL; + return NULL; fbfont = find_font(fbfont_name); if (!fbfont) - fbfont = get_default_font(1024,768); + fbfont = get_default_font(1024,768); if (!fbfont) - return NULL; + return NULL; DPRINTK((KERN_DEBUG "selected %dx%d fb-font %s\n", fbfont->width, fbfont->height, fbfont->name)); @@ -527,7 +527,7 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) nf = kmalloc(size, GFP_KERNEL); if (!nf) - return NULL; + return NULL; memset(nf, 0, size); nf->first_char = 0; @@ -546,8 +546,8 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name ) cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL); if (!cooked_font) { - kfree(nf); - return NULL; + kfree(nf); + return NULL; } cooked_font->raw = nf; @@ -595,7 +595,7 @@ sti_select_font(struct sti_cooked_rom *rom, static void __init sti_dump_rom(struct sti_rom *rom) { - printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n", + printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n", rom->graphics_id[0], rom->graphics_id[1], rom->revno[0] >> 4, @@ -651,15 +651,16 @@ sti_search_font(struct sti_cooked_rom *rom, int height, int width) struct sti_cooked_font *font; int i = 0; - for(font = rom->font_start; font; font = font->next_font, i++) { - if((font->raw->width == width) && (font->raw->height == height)) + for (font = rom->font_start; font; font = font->next_font, i++) { + if ((font->raw->width == width) && + (font->raw->height == height)) return i; } return 0; } -#define BMODE_RELOCATE(offset) offset = (offset) / 4; -#define BMODE_LAST_ADDR_OFFS 0x50 +#define BMODE_RELOCATE(offset) offset = (offset) / 4; +#define BMODE_LAST_ADDR_OFFS 0x50 static void * __init sti_bmode_font_raw(struct sti_cooked_font *f) @@ -700,35 +701,35 @@ sti_get_bmode_rom (unsigned long address) { struct sti_rom *raw; u32 size; - struct sti_rom_font *raw_font, *font_start; - + struct sti_rom_font *raw_font, *font_start; + sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size); - - size = (size+3) / 4; + + size = (size+3) / 4; raw = kmalloc(size, GFP_KERNEL); if (raw) { - sti_bmode_rom_copy(address, size, raw); - memmove (&raw->res004, &raw->type[0], 0x3c); - raw->type[3] = raw->res004; + sti_bmode_rom_copy(address, size, raw); + memmove (&raw->res004, &raw->type[0], 0x3c); + raw->type[3] = raw->res004; - BMODE_RELOCATE (raw->region_list); - BMODE_RELOCATE (raw->font_start); + BMODE_RELOCATE (raw->region_list); + BMODE_RELOCATE (raw->font_start); - BMODE_RELOCATE (raw->init_graph); - BMODE_RELOCATE (raw->state_mgmt); - BMODE_RELOCATE (raw->font_unpmv); - BMODE_RELOCATE (raw->block_move); - BMODE_RELOCATE (raw->inq_conf); + BMODE_RELOCATE (raw->init_graph); + BMODE_RELOCATE (raw->state_mgmt); + BMODE_RELOCATE (raw->font_unpmv); + BMODE_RELOCATE (raw->block_move); + BMODE_RELOCATE (raw->inq_conf); - raw_font = ((void *)raw) + raw->font_start; - font_start = raw_font; + raw_font = ((void *)raw) + raw->font_start; + font_start = raw_font; - while (raw_font->next_font) { - BMODE_RELOCATE (raw_font->next_font); - raw_font = ((void *)font_start) + raw_font->next_font; - } + while (raw_font->next_font) { + BMODE_RELOCATE (raw_font->next_font); + raw_font = ((void *)font_start) + raw_font->next_font; + } } - return raw; + return raw; } struct sti_rom * __init @@ -736,15 +737,15 @@ sti_get_wmode_rom (unsigned long address) { struct sti_rom *raw; unsigned long size; - + /* read the ROM size directly from the struct in ROM */ size = gsc_readl(address + offsetof(struct sti_rom,last_addr)); raw = kmalloc(size, GFP_KERNEL); - if(raw) - sti_rom_copy(address, size, raw); + if (raw) + sti_rom_copy(address, size, raw); - return raw; + return raw; } int __init @@ -757,14 +758,14 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address) if (!cooked) goto out_err; - if (wordmode) - raw = sti_get_wmode_rom (address); - else - raw = sti_get_bmode_rom (address); + if (wordmode) + raw = sti_get_wmode_rom (address); + else + raw = sti_get_bmode_rom (address); + + if (!raw) + goto out_err; - if (!raw) - goto out_err; - if (!sti_cook_fonts(cooked, raw)) { printk(KERN_ERR "No font found for STI at %08lx\n", address); goto out_err; @@ -787,7 +788,7 @@ sti_read_rom(int wordmode, struct sti_struct *sti, unsigned long address) sti->font_width = sti->font->raw->width; sti->font_height = sti->font->raw->height; if (!wordmode) - sti->font->raw = sti_bmode_font_raw(sti->font); + sti->font->raw = sti_bmode_font_raw(sti->font); sti->sti_mem_request = raw->sti_mem_req; sti->graphics_id[0] = raw->graphics_id[0]; @@ -811,16 +812,16 @@ sti_try_rom_generic(unsigned long address, unsigned long hpa, struct pci_dev *pd u32 sig; if (num_sti_roms >= MAX_STI_ROMS) { - printk(KERN_WARNING "maximum number of STI ROMS reached !\n"); - return NULL; + printk(KERN_WARNING "maximum number of STI ROMS reached !\n"); + return NULL; } sti = kmalloc(sizeof(*sti), GFP_KERNEL); if (!sti) { - printk(KERN_ERR "Not enough memory !\n"); - return NULL; + printk(KERN_ERR "Not enough memory !\n"); + return NULL; } - + memset(sti, 0, sizeof(*sti)); spin_lock_init(&sti->lock); @@ -932,28 +933,21 @@ static void __init sticore_check_for_default_sti(struct sti_struct *sti, char *p */ static int __init sticore_pa_init(struct parisc_device *dev) { - unsigned long rom = 0; char pa_path[21]; struct sti_struct *sti = NULL; - - if(dev->num_addrs) { - rom = dev->addr[0]; - } - if (!rom) { - rom = dev->hpa; - DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa)); - sti = sti_try_rom_generic(rom, dev->hpa, NULL); - rom = PAGE0->proc_sti; - } - if (!sti) { - DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa)); - sti = sti_try_rom_generic(rom, dev->hpa, NULL); - } + int hpa = dev->hpa.start; + + if (dev->num_addrs && dev->addr[0]) + sti = sti_try_rom_generic(dev->addr[0], hpa, NULL); + if (!sti) + sti = sti_try_rom_generic(hpa, hpa, NULL); + if (!sti) + sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL); if (!sti) return 1; - + print_pa_hwpath(dev, pa_path); - sticore_check_for_default_sti (sti, pa_path); + sticore_check_for_default_sti(sti, pa_path); return 0; } -- GitLab From 5cd55b0edee7f979530c86b23728d461ddeb9f3f Mon Sep 17 00:00:00 2001 From: Randolph Chung Date: Fri, 21 Oct 2005 22:42:18 -0400 Subject: [PATCH 0351/1519] [PARISC] Take into account nullified insn and lock functions for profiling export profile_pc() symbol - oprofile needs it when built as a module. Signed-off-by: Grant Grundler Take into account nullified insn and lock functions for profiling This is needed at the end of functions; it is typical that the return branch nullifies the next insn, which is in the next function. This causes profiling data to show up against the "wrong" function. We also count lock times against the locker. This is consistent with other architectures. Signed-off-by: Randolph Chung Signed-off-by: Kyle McMartin --- arch/parisc/kernel/time.c | 18 ++++++++++++++++++ include/asm-parisc/ptrace.h | 2 +- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 7ff67f8e9f8c..163cdf39be20 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -104,6 +104,24 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } + +unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + + if (regs->gr[0] & PSW_N) + pc -= 4; + +#ifdef CONFIG_SMP + if (in_lock_functions(pc)) + pc = regs->gr[2]; +#endif + + return pc; +} +EXPORT_SYMBOL(profile_pc); + + /*** converted from ia64 ***/ /* * Return the number of micro-seconds that elapsed since the last diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h index 3f428aa371a4..93f990e418f1 100644 --- a/include/asm-parisc/ptrace.h +++ b/include/asm-parisc/ptrace.h @@ -49,7 +49,7 @@ struct pt_regs { #define user_mode(regs) (((regs)->iaoq[0] & 3) ? 1 : 0) #define user_space(regs) (((regs)->iasq[1] != 0) ? 1 : 0) #define instruction_pointer(regs) ((regs)->iaoq[0] & ~3) -#define profile_pc(regs) instruction_pointer(regs) +unsigned long profile_pc(struct pt_regs *); extern void show_regs(struct pt_regs *); #endif -- GitLab From 3a165680168758733b7a9f7fb835954fbe6b91a8 Mon Sep 17 00:00:00 2001 From: Stuart Brady Date: Fri, 21 Oct 2005 22:42:38 -0400 Subject: [PATCH 0352/1519] [PARISC] Update harmony from parisc tree o Added a control for the input source (which can be either "line" or "mic") o Mute the speaker/line-out/headphone outputs by default. o Increased the buffer size from 10 pages to 16. Signed-off-by: Stuart Brady ALSA Harmony was resetting the capture position when preparing the capture substream, which it shouldn't do. This should fix the problem. Signed-off-by: Stuart Brady ALSA Harmony should no longer play junk (left in the buffers from a previous stream) at the start of a new stream. Implement the monitor mixer channel for ALSA Harmony. Also prevent snd_harmony_volume_get from returning negative values. Signed-off-by: Stuart Brady Use the graveyard/silence buffers in ALSA Harmony. Signed-off-by: Stuart Brady Signed-off-by: Kyle McMartin --- sound/parisc/harmony.c | 110 +++++++++++++++++++++++++++++++++++------ sound/parisc/harmony.h | 17 ++++--- 2 files changed, 105 insertions(+), 22 deletions(-) diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index 8b3ea26469ad..d833349ed518 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -197,7 +197,7 @@ snd_harmony_interrupt(int irq, void *dev, struct pt_regs *regs) spin_unlock(&h->lock); if (dstatus & HARMONY_DSTATUS_PN) { - if (h->psubs) { + if (h->psubs && h->st.playing) { spin_lock(&h->lock); h->pbuf.buf += h->pbuf.count; /* PAGE_SIZE */ h->pbuf.buf %= h->pbuf.size; /* MAX_BUFS*PAGE_SIZE */ @@ -216,7 +216,7 @@ snd_harmony_interrupt(int irq, void *dev, struct pt_regs *regs) } if (dstatus & HARMONY_DSTATUS_RN) { - if (h->csubs) { + if (h->csubs && h->st.capturing) { spin_lock(&h->lock); h->cbuf.buf += h->cbuf.count; h->cbuf.buf %= h->cbuf.size; @@ -316,6 +316,7 @@ snd_harmony_playback_trigger(snd_pcm_substream_t *ss, int cmd) case SNDRV_PCM_TRIGGER_STOP: h->st.playing = 0; harmony_mute(h); + harmony_write(h, HARMONY_PNXTADD, h->sdma.addr); harmony_disable_interrupts(h); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: @@ -351,8 +352,9 @@ snd_harmony_capture_trigger(snd_pcm_substream_t *ss, int cmd) break; case SNDRV_PCM_TRIGGER_STOP: h->st.capturing = 0; - harmony_mute(h); - harmony_disable_interrupts(h); + harmony_mute(h); + harmony_write(h, HARMONY_RNXTADD, h->gdma.addr); + harmony_disable_interrupts(h); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: @@ -408,7 +410,8 @@ snd_harmony_playback_prepare(snd_pcm_substream_t *ss) h->pbuf.size = snd_pcm_lib_buffer_bytes(ss); h->pbuf.count = snd_pcm_lib_period_bytes(ss); - h->pbuf.buf = 0; + if (h->pbuf.buf >= h->pbuf.size) + h->pbuf.buf = 0; h->st.playing = 0; h->st.rate = snd_harmony_rate_bits(rt->rate); @@ -437,7 +440,8 @@ snd_harmony_capture_prepare(snd_pcm_substream_t *ss) h->cbuf.size = snd_pcm_lib_buffer_bytes(ss); h->cbuf.count = snd_pcm_lib_period_bytes(ss); - h->cbuf.buf = 0; + if (h->cbuf.buf >= h->cbuf.size) + h->cbuf.buf = 0; h->st.capturing = 0; h->st.rate = snd_harmony_rate_bits(rt->rate); @@ -712,13 +716,14 @@ snd_harmony_volume_get(snd_kcontrol_t *kc, left = (h->st.gain >> shift_left) & mask; right = (h->st.gain >> shift_right) & mask; - if (invert) { left = mask - left; right = mask - right; } + ucontrol->value.integer.value[0] = left; - ucontrol->value.integer.value[1] = right; + if (shift_left != shift_right) + ucontrol->value.integer.value[1] = right; spin_unlock_irqrestore(&h->mixer_lock, flags); @@ -738,22 +743,82 @@ snd_harmony_volume_put(snd_kcontrol_t *kc, int old_gain = h->st.gain; unsigned long flags; + spin_lock_irqsave(&h->mixer_lock, flags); + left = ucontrol->value.integer.value[0] & mask; - right = ucontrol->value.integer.value[1] & mask; - if (invert) { + if (invert) left = mask - left; - right = mask - right; + h->st.gain &= ~( (mask << shift_left ) ); + h->st.gain |= (left << shift_left); + + if (shift_left != shift_right) { + right = ucontrol->value.integer.value[1] & mask; + if (invert) + right = mask - right; + h->st.gain &= ~( (mask << shift_right) ); + h->st.gain |= (right << shift_right); } + + snd_harmony_set_new_gain(h); + + spin_unlock_irqrestore(&h->mixer_lock, flags); + + return h->st.gain != old_gain; +} + +static int +snd_harmony_captureroute_info(snd_kcontrol_t *kc, + snd_ctl_elem_info_t *uinfo) +{ + static char *texts[2] = { "Line", "Mic" }; + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item > 1) + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; +} + +static int +snd_harmony_captureroute_get(snd_kcontrol_t *kc, + snd_ctl_elem_value_t *ucontrol) +{ + harmony_t *h = snd_kcontrol_chip(kc); + int value; + unsigned long flags; + + spin_lock_irqsave(&h->mixer_lock, flags); + + value = (h->st.gain >> HARMONY_GAIN_IS_SHIFT) & 1; + ucontrol->value.enumerated.item[0] = value; + + spin_unlock_irqrestore(&h->mixer_lock, flags); + + return 0; +} + +static int +snd_harmony_captureroute_put(snd_kcontrol_t *kc, + snd_ctl_elem_value_t *ucontrol) +{ + harmony_t *h = snd_kcontrol_chip(kc); + int value; + int old_gain = h->st.gain; + unsigned long flags; spin_lock_irqsave(&h->mixer_lock, flags); - h->st.gain &= ~( (mask << shift_right) | (mask << shift_left) ); - h->st.gain |= ( (left << shift_left) | (right << shift_right) ); + value = ucontrol->value.enumerated.item[0] & 1; + h->st.gain &= ~HARMONY_GAIN_IS_MASK; + h->st.gain |= value << HARMONY_GAIN_IS_SHIFT; + snd_harmony_set_new_gain(h); spin_unlock_irqrestore(&h->mixer_lock, flags); - return (old_gain - h->st.gain); + return h->st.gain != old_gain; } #define HARMONY_CONTROLS (sizeof(snd_harmony_controls)/ \ @@ -767,10 +832,25 @@ snd_harmony_volume_put(snd_kcontrol_t *kc, ((mask) << 16) | ((invert) << 24)) } static snd_kcontrol_new_t snd_harmony_controls[] = { - HARMONY_VOLUME("Playback Volume", HARMONY_GAIN_LO_SHIFT, + HARMONY_VOLUME("Master Playback Volume", HARMONY_GAIN_LO_SHIFT, HARMONY_GAIN_RO_SHIFT, HARMONY_GAIN_OUT, 1), HARMONY_VOLUME("Capture Volume", HARMONY_GAIN_LI_SHIFT, HARMONY_GAIN_RI_SHIFT, HARMONY_GAIN_IN, 0), + HARMONY_VOLUME("Monitor Volume", HARMONY_GAIN_MA_SHIFT, + HARMONY_GAIN_MA_SHIFT, HARMONY_GAIN_MA, 1), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Input Route", + .info = snd_harmony_captureroute_info, + .get = snd_harmony_captureroute_get, + .put = snd_harmony_captureroute_put + }, + HARMONY_VOLUME("Internal Speaker Switch", HARMONY_GAIN_SE_SHIFT, + HARMONY_GAIN_SE_SHIFT, 1, 0), + HARMONY_VOLUME("Line-Out Switch", HARMONY_GAIN_LE_SHIFT, + HARMONY_GAIN_LE_SHIFT, 1, 0), + HARMONY_VOLUME("Headphones Switch", HARMONY_GAIN_HE_SHIFT, + HARMONY_GAIN_HE_SHIFT, 1, 0), }; static void __init diff --git a/sound/parisc/harmony.h b/sound/parisc/harmony.h index ef77f9a577d5..526c52389de2 100644 --- a/sound/parisc/harmony.h +++ b/sound/parisc/harmony.h @@ -61,7 +61,7 @@ typedef struct snd_card_harmony { #define HARMONY_SIZE 64 #define BUF_SIZE PAGE_SIZE -#define MAX_BUFS 10 +#define MAX_BUFS 16 #define MAX_BUF_SIZE (MAX_BUFS * BUF_SIZE) #define PLAYBACK_BUFS MAX_BUFS @@ -101,28 +101,31 @@ typedef struct snd_card_harmony { #define HARMONY_SS_MONO 0x00000000 #define HARMONY_SS_STEREO 0x00000001 -#define HARMONY_GAIN_SILENCE 0x00F00FFF -#define HARMONY_GAIN_DEFAULT 0x0FF00000 +#define HARMONY_GAIN_SILENCE 0x01F00FFF +#define HARMONY_GAIN_DEFAULT 0x01F00FFF -#define HARMONY_GAIN_HE_SHIFT 27 +#define HARMONY_GAIN_HE_SHIFT 27 /* headphones enabled */ #define HARMONY_GAIN_HE_MASK (1 << HARMONY_GAIN_HE_SHIFT) -#define HARMONY_GAIN_LE_SHIFT 26 +#define HARMONY_GAIN_LE_SHIFT 26 /* line-out enabled */ #define HARMONY_GAIN_LE_MASK (1 << HARMONY_GAIN_LE_SHIFT) -#define HARMONY_GAIN_SE_SHIFT 25 +#define HARMONY_GAIN_SE_SHIFT 25 /* internal-speaker enabled */ #define HARMONY_GAIN_SE_MASK (1 << HARMONY_GAIN_SE_SHIFT) -#define HARMONY_GAIN_IS_SHIFT 24 +#define HARMONY_GAIN_IS_SHIFT 24 /* input select - 0 for line, 1 for mic */ #define HARMONY_GAIN_IS_MASK (1 << HARMONY_GAIN_IS_SHIFT) +/* monitor attenuation */ #define HARMONY_GAIN_MA 0x0f #define HARMONY_GAIN_MA_SHIFT 20 #define HARMONY_GAIN_MA_MASK (HARMONY_GAIN_MA << HARMONY_GAIN_MA_SHIFT) +/* input gain */ #define HARMONY_GAIN_IN 0x0f #define HARMONY_GAIN_LI_SHIFT 16 #define HARMONY_GAIN_LI_MASK (HARMONY_GAIN_IN << HARMONY_GAIN_LI_SHIFT) #define HARMONY_GAIN_RI_SHIFT 12 #define HARMONY_GAIN_RI_MASK (HARMONY_GAIN_IN << HARMONY_GAIN_RI_SHIFT) +/* output gain (master volume) */ #define HARMONY_GAIN_OUT 0x3f #define HARMONY_GAIN_LO_SHIFT 6 #define HARMONY_GAIN_LO_MASK (HARMONY_GAIN_OUT << HARMONY_GAIN_LO_SHIFT) -- GitLab From 99ac79479928bae42d694b7cb53644be5d3b6dd2 Mon Sep 17 00:00:00 2001 From: Randolph Chung Date: Fri, 21 Oct 2005 22:42:57 -0400 Subject: [PATCH 0353/1519] [PARISC] Replace some calls to bl with b,l or bv to use longer offsets convert some bl calls to b,l or bv to use longer offsets Signed-off-by: Randolph Chung Signed-off-by: Kyle McMartin --- arch/parisc/kernel/entry.S | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 65a82c2645a7..ec04e0ad77fa 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -821,7 +821,12 @@ ret_from_kernel_thread: ldo -16(%r30),%r29 /* Reference param save area */ loadgp /* Thread could have been in a module */ #endif +#ifndef CONFIG_64BIT b sys_exit +#else + load32 sys_exit, %r1 + bv %r0(%r1) +#endif ldi 0, %r26 .import sys_execve, code @@ -1012,7 +1017,7 @@ intr_restore: .import do_softirq,code intr_do_softirq: - bl do_softirq,%r2 + BL do_softirq,%r2 #ifdef __LP64__ ldo -16(%r30),%r29 /* Reference param save area */ #else @@ -1036,7 +1041,12 @@ intr_do_resched: #endif ldil L%intr_check_sig, %r2 +#ifndef CONFIG_64BIT b schedule +#else + load32 schedule, %r20 + bv %r0(%r20) +#endif ldo R%intr_check_sig(%r2), %r2 @@ -1897,7 +1907,7 @@ sys_vfork_wrapper: #ifdef __LP64__ ldo -16(%r30),%r29 /* Reference param save area */ #endif - bl \execve,%r2 + BL \execve,%r2 copy %r1,%arg0 ldo -FRAME_SIZE(%r30),%r30 @@ -2226,7 +2236,7 @@ pt_regs_ok: .import do_softirq,code syscall_do_softirq: - bl do_softirq,%r2 + BL do_softirq,%r2 nop /* NOTE: We enable I-bit incase we schedule later, * and we might be going back to userspace if we were -- GitLab From f053725b8985d10c2cc4b837a80a381104c936a4 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 21 Oct 2005 22:43:15 -0400 Subject: [PATCH 0354/1519] [PARISC] Add ability for prctl to change unaligned trap behaviour Add support for changing unaligned trap behaviour on a per-thread basis. Signed-off-by: Kyle McMartin --- arch/parisc/kernel/unaligned.c | 16 ++++++++++------ include/asm-parisc/processor.h | 19 +++++++++++++++++++ 2 files changed, 29 insertions(+), 6 deletions(-) diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 62eea35bcd69..eaae8a021f9f 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -513,15 +513,18 @@ void handle_unaligned(struct pt_regs *regs) register int flop=0; /* true if this is a flop */ /* log a message with pacing */ - if (user_mode(regs)) - { - if (unaligned_count > 5 && jiffies - last_time > 5*HZ) - { + if (user_mode(regs)) { + if (current->thread.flags & PARISC_UAC_SIGBUS) { + goto force_sigbus; + } + + if (unaligned_count > 5 && jiffies - last_time > 5*HZ) { unaligned_count = 0; last_time = jiffies; } - if (++unaligned_count < 5) - { + + if (!(current->thread.flags & PARISC_UAC_NOPRINT) + && ++unaligned_count < 5) { char buf[256]; sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n", current->comm, current->pid, regs->ior, regs->iaoq[0]); @@ -530,6 +533,7 @@ void handle_unaligned(struct pt_regs *regs) show_regs(regs); #endif } + if (!unaligned_enabled) goto force_sigbus; } diff --git a/include/asm-parisc/processor.h b/include/asm-parisc/processor.h index a9dfadd05658..aae40e8c3aa8 100644 --- a/include/asm-parisc/processor.h +++ b/include/asm-parisc/processor.h @@ -122,8 +122,27 @@ struct thread_struct { }; /* Thread struct flags. */ +#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */ +#define PARISC_UAC_SIGBUS (1UL << 1) #define PARISC_KERNEL_DEATH (1UL << 31) /* see die_if_kernel()... */ +#define PARISC_UAC_SHIFT 0 +#define PARISC_UAC_MASK (PARISC_UAC_NOPRINT|PARISC_UAC_SIGBUS) + +#define SET_UNALIGN_CTL(task,value) \ + ({ \ + (task)->thread.flags = (((task)->thread.flags & ~PARISC_UAC_MASK) \ + | (((value) << PARISC_UAC_SHIFT) & \ + PARISC_UAC_MASK)); \ + 0; \ + }) + +#define GET_UNALIGN_CTL(task,addr) \ + ({ \ + put_user(((task)->thread.flags & PARISC_UAC_MASK) \ + >> PARISC_UAC_SHIFT, (int __user *) (addr)); \ + }) + #define INIT_THREAD { \ regs: { gr: { 0, }, \ fr: { 0, }, \ -- GitLab From 2464212f68136527f6364d63c23a529e1fd7d168 Mon Sep 17 00:00:00 2001 From: Stuart Brady Date: Fri, 21 Oct 2005 22:44:14 -0400 Subject: [PATCH 0355/1519] [PARISC] Fix parisc_setup_cache_timing to choose a better flush threshold update comment about CAFL_STRIDE Signed-off-by: Kyle McMartin Fixed a bug in parisc_setup_cache_timing() which caused it to calculate a poor value for parisc_cache_flush_threshold. Thanks to Joel Soete for spotting the bug. Thanks to James Bottomley for pointing out the clean way to fix this. Signed-off-by: Stuart Brady Signed-off-by: Kyle McMartin --- arch/parisc/kernel/cache.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index f46a07a79218..e15f09eaed12 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -27,6 +27,7 @@ #include #include #include +#include int split_tlb; int dcache_stride; @@ -207,6 +208,9 @@ parisc_cache_init(void) /* "New and Improved" version from Jim Hull * (1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift)) + * The following CAFL_STRIDE is an optimized version, see + * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html + * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html */ #define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift)) dcache_stride = CAFL_STRIDE(cache_info.dc_conf); @@ -339,17 +343,15 @@ int parisc_cache_flush_threshold = FLUSH_THRESHOLD; void parisc_setup_cache_timing(void) { unsigned long rangetime, alltime; - extern char _text; /* start of kernel code, defined by linker */ - extern char _end; /* end of BSS, defined by linker */ unsigned long size; alltime = mfctl(16); flush_data_cache(); alltime = mfctl(16) - alltime; - size = (unsigned long)(&_end - _text); + size = (unsigned long)(_end - _text); rangetime = mfctl(16); - flush_kernel_dcache_range((unsigned long)&_text, size); + flush_kernel_dcache_range((unsigned long)_text, size); rangetime = mfctl(16) - rangetime; printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n", -- GitLab From a366064c3ff46c985a3c7243468be197d29874dc Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:45:22 -0400 Subject: [PATCH 0356/1519] [PARISC] Update bitops from parisc tree Optimize ext2_find_next_zero_bit. Gives about 25% perf improvement with a rsync test with ext3. Signed-off-by: Randolph Chung fix ext3 performance - ext2_find_next_zero() was culprit. Kudos to jejb for pointing out the the possibility that ext2_test_bit and ext2_find_next_zero() may in fact not be enumerating bits in the bitmap because of endianess. Took sparc64 implementation and adapted it to our tree. I suspect the real problem is ffz() wants an unsigned long and was getting garbage in the top half of the unsigned int. Not confirmed but that's what I suspect. Signed-off-by: Grant Grundler Fix find_next_bit for 32-bit Make masking consistent for bitops From: Joel Soete Signed-off-by: Randolph Chung Add back incorrectly removed ext2_find_first_zero_bit definition Signed-off-by: James Bottomley Fixup bitops.h to use volatile for *_bit() ops Based on this email thread: http://marc.theaimsgroup.com/?t=108826637900003 In a nutshell: *_bit() want use of volatile. __*_bit() are "relaxed" and don't use spinlock or volatile. other minor changes: o replaces hweight64() macro with alias to generic_hweight64() (Joel Soete) o cleanup ext2* macros so (a) it's obvious what the XOR magic is about and (b) one version that works for both 32/64-bit. o replace 2 uses of CONFIG_64BIT with __LP64__. bitops.h used both. I think header files that might go to user space should use something userspace will know about (__LP64__). Signed-off-by: Grant Grundler Move SHIFT_PER_LONG to standard location for BITS_PER_LONG (asm/types.h) and ditch the second definition of BITS_PER_LONG in bitops.h Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- include/asm-parisc/bitops.h | 290 ++++++++++++++++-------------------- include/asm-parisc/types.h | 2 + 2 files changed, 134 insertions(+), 158 deletions(-) diff --git a/include/asm-parisc/bitops.h b/include/asm-parisc/bitops.h index af7db694b22d..55b98c67fd82 100644 --- a/include/asm-parisc/bitops.h +++ b/include/asm-parisc/bitops.h @@ -2,7 +2,7 @@ #define _PARISC_BITOPS_H #include -#include +#include /* for BITS_PER_LONG/SHIFT_PER_LONG */ #include #include @@ -12,193 +12,157 @@ * to include/asm-i386/bitops.h or kerneldoc */ -#ifdef __LP64__ -# define SHIFT_PER_LONG 6 -#ifndef BITS_PER_LONG -# define BITS_PER_LONG 64 -#endif -#else -# define SHIFT_PER_LONG 5 -#ifndef BITS_PER_LONG -# define BITS_PER_LONG 32 -#endif -#endif - -#define CHOP_SHIFTCOUNT(x) ((x) & (BITS_PER_LONG - 1)) +#define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1)) #define smp_mb__before_clear_bit() smp_mb() #define smp_mb__after_clear_bit() smp_mb() -static __inline__ void set_bit(int nr, volatile unsigned long * address) +/* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion + * on use of volatile and __*_bit() (set/clear/change): + * *_bit() want use of volatile. + * __*_bit() are "relaxed" and don't use spinlock or volatile. + */ + +static __inline__ void set_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); *addr |= mask; _atomic_spin_unlock_irqrestore(addr, flags); } -static __inline__ void __set_bit(int nr, volatile unsigned long * address) +static __inline__ void __set_bit(unsigned long nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG); - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - *addr |= mask; + *m |= 1UL << CHOP_SHIFTCOUNT(nr); } -static __inline__ void clear_bit(int nr, volatile unsigned long * address) +static __inline__ void clear_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long mask = ~(1UL << CHOP_SHIFTCOUNT(nr)); unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); - *addr &= ~mask; + *addr &= mask; _atomic_spin_unlock_irqrestore(addr, flags); } -static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * address) +static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG); - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - *addr &= ~mask; + *m &= ~(1UL << CHOP_SHIFTCOUNT(nr)); } -static __inline__ void change_bit(int nr, volatile unsigned long * address) +static __inline__ void change_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); *addr ^= mask; _atomic_spin_unlock_irqrestore(addr, flags); } -static __inline__ void __change_bit(int nr, volatile unsigned long * address) +static __inline__ void __change_bit(unsigned long nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; + unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG); - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - *addr ^= mask; + *m ^= 1UL << CHOP_SHIFTCOUNT(nr); } -static __inline__ int test_and_set_bit(int nr, volatile unsigned long * address) +static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long oldbit; unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); - oldbit = (*addr & mask) ? 1 : 0; - *addr |= mask; + oldbit = *addr; + *addr = oldbit | mask; _atomic_spin_unlock_irqrestore(addr, flags); - return oldbit; + return (oldbit & mask) ? 1 : 0; } static __inline__ int __test_and_set_bit(int nr, volatile unsigned long * address) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long oldbit; + unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG); - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - oldbit = (*addr & mask) ? 1 : 0; - *addr |= mask; + oldbit = *addr; + *addr = oldbit | mask; - return oldbit; + return (oldbit & mask) ? 1 : 0; } -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * address) +static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long oldbit; unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); - oldbit = (*addr & mask) ? 1 : 0; - *addr &= ~mask; + oldbit = *addr; + *addr = oldbit & ~mask; _atomic_spin_unlock_irqrestore(addr, flags); - return oldbit; + return (oldbit & mask) ? 1 : 0; } static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long * address) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG); + unsigned long oldbit; - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - oldbit = (*addr & mask) ? 1 : 0; - *addr &= ~mask; + oldbit = *addr; + *addr = oldbit & ~mask; - return oldbit; + return (oldbit & mask) ? 1 : 0; } -static __inline__ int test_and_change_bit(int nr, volatile unsigned long * address) +static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long oldbit; unsigned long flags; addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); _atomic_spin_lock_irqsave(addr, flags); - oldbit = (*addr & mask) ? 1 : 0; - *addr ^= mask; + oldbit = *addr; + *addr = oldbit ^ mask; _atomic_spin_unlock_irqrestore(addr, flags); - return oldbit; + return (oldbit & mask) ? 1 : 0; } static __inline__ int __test_and_change_bit(int nr, volatile unsigned long * address) { - unsigned long mask; - unsigned long *addr = (unsigned long *) address; - int oldbit; + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG); + unsigned long oldbit; - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); - oldbit = (*addr & mask) ? 1 : 0; - *addr ^= mask; + oldbit = *addr; + *addr = oldbit ^ mask; - return oldbit; + return (oldbit & mask) ? 1 : 0; } static __inline__ int test_bit(int nr, const volatile unsigned long *address) { - unsigned long mask; - const unsigned long *addr = (const unsigned long *)address; - - addr += (nr >> SHIFT_PER_LONG); - mask = 1L << CHOP_SHIFTCOUNT(nr); + unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr); + const unsigned long *addr = (const unsigned long *)address + (nr >> SHIFT_PER_LONG); return !!(*addr & mask); } @@ -229,7 +193,7 @@ static __inline__ unsigned long __ffs(unsigned long x) unsigned long ret; __asm__( -#if BITS_PER_LONG > 32 +#ifdef __LP64__ " ldi 63,%1\n" " extrd,u,*<> %0,63,32,%%r0\n" " extrd,u,*TR %0,31,32,%0\n" /* move top 32-bits down */ @@ -304,14 +268,7 @@ static __inline__ int fls(int x) * hweightN: returns the hamming weight (i.e. the number * of bits set) of a N-bit word */ -#define hweight64(x) \ -({ \ - unsigned long __x = (x); \ - unsigned int __w; \ - __w = generic_hweight32((unsigned int) __x); \ - __w += generic_hweight32((unsigned int) (__x>>32)); \ - __w; \ -}) +#define hweight64(x) generic_hweight64(x) #define hweight32(x) generic_hweight32(x) #define hweight16(x) generic_hweight16(x) #define hweight8(x) generic_hweight8(x) @@ -324,7 +281,13 @@ static __inline__ int fls(int x) */ static inline int sched_find_first_bit(const unsigned long *b) { -#ifndef __LP64__ +#ifdef __LP64__ + if (unlikely(b[0])) + return __ffs(b[0]); + if (unlikely(b[1])) + return __ffs(b[1]) + 64; + return __ffs(b[2]) + 128; +#else if (unlikely(b[0])) return __ffs(b[0]); if (unlikely(b[1])) @@ -334,14 +297,6 @@ static inline int sched_find_first_bit(const unsigned long *b) if (b[3]) return __ffs(b[3]) + 96; return __ffs(b[4]) + 128; -#else - if (unlikely(b[0])) - return __ffs(b[0]); - if (unlikely(((unsigned int)b[1]))) - return __ffs(b[1]) + 64; - if (b[1] >> 32) - return __ffs(b[1] >> 32) + 96; - return __ffs(b[2]) + 128; #endif } @@ -391,7 +346,7 @@ static __inline__ unsigned long find_next_zero_bit(const void * addr, unsigned l static __inline__ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset) { - const unsigned long *p = addr + (offset >> 6); + const unsigned long *p = addr + (offset >> SHIFT_PER_LONG); unsigned long result = offset & ~(BITS_PER_LONG-1); unsigned long tmp; @@ -445,71 +400,90 @@ static __inline__ unsigned long find_next_bit(const unsigned long *addr, unsigne * test_and_{set,clear}_bit guarantee atomicity without * disabling interrupts. */ -#ifdef __LP64__ -#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr) -#define ext2_set_bit_atomic(l,nr,addr) test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr) -#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr) -#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr) -#else -#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr) -#define ext2_set_bit_atomic(l,nr,addr) test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr) -#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr) -#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr) -#endif -#endif /* __KERNEL__ */ +/* '3' is bits per byte */ +#define LE_BYTE_ADDR ((sizeof(unsigned long) - 1) << 3) -static __inline__ int ext2_test_bit(int nr, __const__ void * addr) -{ - __const__ unsigned char *ADDR = (__const__ unsigned char *) addr; +#define ext2_test_bit(nr, addr) \ + test_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) +#define ext2_set_bit(nr, addr) \ + __test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) +#define ext2_clear_bit(nr, addr) \ + __test_and_clear_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) - return (ADDR[nr >> 3] >> (nr & 7)) & 1; -} +#define ext2_set_bit_atomic(l,nr,addr) \ + test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) +#define ext2_clear_bit_atomic(l,nr,addr) \ + test_and_clear_bit( (nr) ^ LE_BYTE_ADDR, (unsigned long *)addr) + +#endif /* __KERNEL__ */ -/* - * This implementation of ext2_find_{first,next}_zero_bit was stolen from - * Linus' asm-alpha/bitops.h and modified for a big-endian machine. - */ #define ext2_find_first_zero_bit(addr, size) \ - ext2_find_next_zero_bit((addr), (size), 0) + ext2_find_next_zero_bit((addr), (size), 0) -extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr, - unsigned long size, unsigned long offset) +/* include/linux/byteorder does not support "unsigned long" type */ +static inline unsigned long ext2_swabp(unsigned long * x) { - unsigned int *p = ((unsigned int *) addr) + (offset >> 5); - unsigned int result = offset & ~31UL; - unsigned int tmp; +#ifdef __LP64__ + return (unsigned long) __swab64p((u64 *) x); +#else + return (unsigned long) __swab32p((u32 *) x); +#endif +} + +/* include/linux/byteorder doesn't support "unsigned long" type */ +static inline unsigned long ext2_swab(unsigned long y) +{ +#ifdef __LP64__ + return (unsigned long) __swab64((u64) y); +#else + return (unsigned long) __swab32((u32) y); +#endif +} + +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) +{ + unsigned long *p = (unsigned long *) addr + (offset >> SHIFT_PER_LONG); + unsigned long result = offset & ~(BITS_PER_LONG - 1); + unsigned long tmp; if (offset >= size) return size; size -= result; - offset &= 31UL; + offset &= (BITS_PER_LONG - 1UL); if (offset) { - tmp = cpu_to_le32p(p++); - tmp |= ~0UL >> (32-offset); - if (size < 32) + tmp = ext2_swabp(p++); + tmp |= (~0UL >> (BITS_PER_LONG - offset)); + if (size < BITS_PER_LONG) goto found_first; - if (tmp != ~0U) + if (~tmp) goto found_middle; - size -= 32; - result += 32; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; } - while (size >= 32) { - if ((tmp = cpu_to_le32p(p++)) != ~0U) - goto found_middle; - result += 32; - size -= 32; + + while (size & ~(BITS_PER_LONG - 1)) { + if (~(tmp = *(p++))) + goto found_middle_swap; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; } if (!size) return result; - tmp = cpu_to_le32p(p); + tmp = ext2_swabp(p); found_first: - tmp |= ~0U << size; + tmp |= ~0UL << size; + if (tmp == ~0UL) /* Are any bits zero? */ + return result + size; /* Nope. Skip ffz */ found_middle: return result + ffz(tmp); + +found_middle_swap: + return result + ffz(ext2_swab(tmp)); } + /* Bitmap functions for the minix filesystem. */ #define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr) #define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr)) diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h index d21b9d0d63ea..34fdce361a5a 100644 --- a/include/asm-parisc/types.h +++ b/include/asm-parisc/types.h @@ -33,8 +33,10 @@ typedef unsigned long long __u64; #ifdef __LP64__ #define BITS_PER_LONG 64 +#define SHIFT_PER_LONG 6 #else #define BITS_PER_LONG 32 +#define SHIFT_PER_LONG 5 #endif #ifndef __ASSEMBLY__ -- GitLab From ba1f188cae2f58e6bf3ecf4ea99a8dc4b0e2ea0e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 21 Oct 2005 22:45:57 -0400 Subject: [PATCH 0357/1519] [PARISC] Add new ioprio_{set,get} syscalls add syscall entries for ioprio_set/get as per Jens Axboe. Signed-off-by: Jens Axboe Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/syscall_table.S | 6 ++++++ include/asm-parisc/unistd.h | 16 +++++++++++----- 2 files changed, 17 insertions(+), 5 deletions(-) diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index dcfa4d3d0e7d..065ab809659d 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -368,5 +368,11 @@ ENTRY_COMP(mbind) /* 260 */ ENTRY_COMP(get_mempolicy) ENTRY_COMP(set_mempolicy) + ENTRY_SAME(ni_syscall) /* 263: reserved for vserver */ + ENTRY_SAME(add_key) + ENTRY_SAME(request_key) /* 265 */ + ENTRY_SAME(keyctl) + ENTRY_SAME(ioprio_set) + ENTRY_SAME(ioprio_get) /* Nothing yet */ diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h index 6a9f0cadff58..e7a620c5c5e6 100644 --- a/include/asm-parisc/unistd.h +++ b/include/asm-parisc/unistd.h @@ -687,8 +687,8 @@ #define __NR_shmget (__NR_Linux + 194) #define __NR_shmctl (__NR_Linux + 195) -#define __NR_getpmsg (__NR_Linux + 196) /* some people actually want streams */ -#define __NR_putpmsg (__NR_Linux + 197) /* some people actually want streams */ +#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */ +#define __NR_putpmsg (__NR_Linux + 197) #define __NR_lstat64 (__NR_Linux + 198) #define __NR_truncate64 (__NR_Linux + 199) @@ -755,8 +755,14 @@ #define __NR_mbind (__NR_Linux + 260) #define __NR_get_mempolicy (__NR_Linux + 261) #define __NR_set_mempolicy (__NR_Linux + 262) +#define __NR_vserver (__NR_Linux + 263) +#define __NR_add_key (__NR_Linux + 264) +#define __NR_request_key (__NR_Linux + 265) +#define __NR_keyctl (__NR_Linux + 266) +#define __NR_ioprio_set (__NR_Linux + 267) +#define __NR_ioprio_get (__NR_Linux + 268) -#define __NR_Linux_syscalls 263 +#define __NR_Linux_syscalls 269 #define HPUX_GATEWAY_ADDR 0xC0000004 #define LINUX_GATEWAY_ADDR 0x100 @@ -807,10 +813,10 @@ #define K_INLINE_SYSCALL(name, nr, args...) ({ \ long __sys_res; \ { \ - register unsigned long __res asm("r28"); \ + register unsigned long __res __asm__("r28"); \ K_LOAD_ARGS_##nr(args) \ /* FIXME: HACK stw/ldw r19 around syscall */ \ - asm volatile( \ + __asm__ volatile( \ K_STW_ASM_PIC \ " ble 0x100(%%sr2, %%r0)\n" \ " ldi %1, %%r20\n" \ -- GitLab From 3499495205a676d85fcc2f3c28e35ec9b43c47e3 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:46:18 -0400 Subject: [PATCH 0358/1519] [PARISC] Use work queue in LED/LCD driver instead of tasklet. 2.6.12-rc1-pa6 use work queue in LED/LCD driver instead of tasklet. Main advantage is it allows use of msleep() in the led_LCD_driver to "atomically" perform two MMIO writes (CMD, then DATA). Lead to nice cleanup of the main led_work_func() and led_LCD_driver(). Kudos to David for being persistent. From: David Pye Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/time.c | 8 -- drivers/parisc/led.c | 225 +++++++++++++++++++------------------- include/asm-parisc/led.h | 3 - 3 files changed, 112 insertions(+), 124 deletions(-) diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 163cdf39be20..bc979e1abdec 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -89,14 +89,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) } } -#ifdef CONFIG_CHASSIS_LCD_LED - /* Only schedule the led tasklet on cpu 0, and only if it - * is enabled. - */ - if (cpu == 0 && !atomic_read(&led_tasklet.count)) - tasklet_schedule(&led_tasklet); -#endif - /* check soft power switch status */ if (cpu == 0 && !atomic_read(&power_tasklet.count)) tasklet_schedule(&power_tasklet); diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c index 286902298e33..95bd07b8b61b 100644 --- a/drivers/parisc/led.c +++ b/drivers/parisc/led.c @@ -18,6 +18,9 @@ * Changes: * - Audit copy_from_user in led_proc_write. * Daniele Bellucci + * - Switch from using a tasklet to a work queue, so the led_LCD_driver + * can sleep. + * David Pye */ #include @@ -37,6 +40,7 @@ #include #include #include +#include #include #include #include @@ -47,25 +51,30 @@ #include /* The control of the LEDs and LCDs on PARISC-machines have to be done - completely in software. The necessary calculations are done in a tasklet - which is scheduled at every timer interrupt and since the calculations - may consume relatively much CPU-time some of the calculations can be + completely in software. The necessary calculations are done in a work queue + task which is scheduled regularly, and since the calculations may consume a + relatively large amount of CPU time, some of the calculations can be turned off with the following variables (controlled via procfs) */ static int led_type = -1; -static int led_heartbeat = 1; -static int led_diskio = 1; -static int led_lanrxtx = 1; +static unsigned char lastleds; /* LED state from most recent update */ +static unsigned int led_heartbeat = 1; +static unsigned int led_diskio = 1; +static unsigned int led_lanrxtx = 1; static char lcd_text[32]; static char lcd_text_default[32]; + +static struct workqueue_struct *led_wq; +static void led_work_func(void *); +static DECLARE_WORK(led_task, led_work_func, NULL); + #if 0 #define DPRINTK(x) printk x #else #define DPRINTK(x) #endif - struct lcd_block { unsigned char command; /* stores the command byte */ unsigned char on; /* value for turning LED on */ @@ -116,12 +125,27 @@ lcd_info __attribute__((aligned(8))) = #define LCD_DATA_REG lcd_info.lcd_data_reg_addr #define LED_DATA_REG lcd_info.lcd_cmd_reg_addr /* LASI & ASP only */ +#define LED_HASLCD 1 +#define LED_NOLCD 0 + +/* The workqueue must be created at init-time */ +static int start_task(void) +{ + /* Display the default text now */ + if (led_type == LED_HASLCD) lcd_print( lcd_text_default ); + + /* Create the work queue and queue the LED task */ + led_wq = create_singlethread_workqueue("led_wq"); + queue_work(led_wq, &led_task); + + return 0; +} + +device_initcall(start_task); /* ptr to LCD/LED-specific function */ static void (*led_func_ptr) (unsigned char); -#define LED_HASLCD 1 -#define LED_NOLCD 0 #ifdef CONFIG_PROC_FS static int led_proc_read(char *page, char **start, off_t off, int count, int *eof, void *data) @@ -286,52 +310,35 @@ static void led_LASI_driver(unsigned char leds) /* ** ** led_LCD_driver() - ** - ** The logic of the LCD driver is, that we write at every scheduled call - ** only to one of LCD_CMD_REG _or_ LCD_DATA_REG - registers. - ** That way we don't need to let this tasklet busywait for min_cmd_delay - ** milliseconds. - ** - ** TODO: check the value of "min_cmd_delay" against the value of HZ. ** */ static void led_LCD_driver(unsigned char leds) { - static int last_index; /* 0:heartbeat, 1:disk, 2:lan_in, 3:lan_out */ - static int last_was_cmd;/* 0: CMD was written last, 1: DATA was last */ - struct lcd_block *block_ptr; - int value; - - switch (last_index) { - case 0: block_ptr = &lcd_info.heartbeat; - value = leds & LED_HEARTBEAT; - break; - case 1: block_ptr = &lcd_info.disk_io; - value = leds & LED_DISK_IO; - break; - case 2: block_ptr = &lcd_info.lan_rcv; - value = leds & LED_LAN_RCV; - break; - case 3: block_ptr = &lcd_info.lan_tx; - value = leds & LED_LAN_TX; - break; - default: /* should never happen: */ - return; - } - - if (last_was_cmd) { - /* write the value to the LCD data port */ - gsc_writeb( value ? block_ptr->on : block_ptr->off, LCD_DATA_REG ); - } else { - /* write the command-byte to the LCD command register */ - gsc_writeb( block_ptr->command, LCD_CMD_REG ); - } + static int i; + static unsigned char mask[4] = { LED_HEARTBEAT, LED_DISK_IO, + LED_LAN_RCV, LED_LAN_TX }; - /* now update the vars for the next interrupt iteration */ - if (++last_was_cmd == 2) { /* switch between cmd & data */ - last_was_cmd = 0; - if (++last_index == 4) - last_index = 0; /* switch back to heartbeat index */ + static struct lcd_block * blockp[4] = { + &lcd_info.heartbeat, + &lcd_info.disk_io, + &lcd_info.lan_rcv, + &lcd_info.lan_tx + }; + + /* Convert min_cmd_delay to milliseconds */ + unsigned int msec_cmd_delay = 1 + (lcd_info.min_cmd_delay / 1000); + + for (i=0; i<4; ++i) + { + if ((leds & mask[i]) != (lastleds & mask[i])) + { + gsc_writeb( blockp[i]->command, LCD_CMD_REG ); + msleep(msec_cmd_delay); + + gsc_writeb( leds & mask[i] ? blockp[i]->on : + blockp[i]->off, LCD_DATA_REG ); + msleep(msec_cmd_delay); + } } } @@ -356,7 +363,7 @@ static __inline__ int led_get_net_activity(void) rx_total = tx_total = 0; - /* we are running as tasklet, so locking dev_base + /* we are running as a workqueue task, so locking dev_base * for reading should be OK */ read_lock(&dev_base_lock); rcu_read_lock(); @@ -405,7 +412,7 @@ static __inline__ int led_get_diskio_activity(void) static unsigned long last_pgpgin, last_pgpgout; struct page_state pgstat; int changed; - + get_full_page_state(&pgstat); /* get no of sectors in & out */ /* Just use a very simple calculation here. Do not care about overflow, @@ -413,86 +420,70 @@ static __inline__ int led_get_diskio_activity(void) changed = (pgstat.pgpgin != last_pgpgin) || (pgstat.pgpgout != last_pgpgout); last_pgpgin = pgstat.pgpgin; last_pgpgout = pgstat.pgpgout; - + return (changed ? LED_DISK_IO : 0); } /* - ** led_tasklet_func() + ** led_work_func() ** - ** is scheduled at every timer interrupt from time.c and - ** updates the chassis LCD/LED + ** manages when and which chassis LCD/LED gets updated TODO: - display load average (older machines like 715/64 have 4 "free" LED's for that) - optimizations */ -#define HEARTBEAT_LEN (HZ*6/100) -#define HEARTBEAT_2ND_RANGE_START (HZ*22/100) +#define HEARTBEAT_LEN (HZ*10/100) +#define HEARTBEAT_2ND_RANGE_START (HZ*28/100) #define HEARTBEAT_2ND_RANGE_END (HEARTBEAT_2ND_RANGE_START + HEARTBEAT_LEN) -#define NORMALIZED_COUNT(count) (count/(HZ/100)) +#define LED_UPDATE_INTERVAL (1 + (HZ*19/1000)) -static void led_tasklet_func(unsigned long unused) +static void led_work_func (void *unused) { - static unsigned char lastleds; - unsigned char currentleds; /* stores current value of the LEDs */ - static unsigned long count; /* static incremented value, not wrapped */ + static unsigned long last_jiffies; static unsigned long count_HZ; /* counter in range 0..HZ */ + unsigned char currentleds = 0; /* stores current value of the LEDs */ /* exit if not initialized */ if (!led_func_ptr) return; - /* increment the local counters */ - ++count; - if (++count_HZ == HZ) + /* increment the heartbeat timekeeper */ + count_HZ += jiffies - last_jiffies; + last_jiffies = jiffies; + if (count_HZ >= HZ) count_HZ = 0; - currentleds = lastleds; - - if (led_heartbeat) - { - /* flash heartbeat-LED like a real heart (2 x short then a long delay) */ - if (count_HZ=HEARTBEAT_2ND_RANGE_START && count_HZ= HEARTBEAT_2ND_RANGE_START && + count_HZ < HEARTBEAT_2ND_RANGE_END)) + currentleds |= LED_HEARTBEAT; } - /* avoid to calculate diskio-stats at same irq as netio-stats */ - if (led_diskio && (NORMALIZED_COUNT(count) & 7) == 0) - { - currentleds &= ~LED_DISK_IO; - currentleds |= led_get_diskio_activity(); - } + if (likely(led_lanrxtx)) currentleds |= led_get_net_activity(); + if (likely(led_diskio)) currentleds |= led_get_diskio_activity(); /* blink all LEDs twice a second if we got an Oops (HPMC) */ - if (oops_in_progress) { + if (unlikely(oops_in_progress)) currentleds = (count_HZ<=(HZ/2)) ? 0 : 0xff; - } - - /* update the LCD/LEDs */ - if (currentleds != lastleds) { - led_func_ptr(currentleds); - lastleds = currentleds; - } -} -/* main led tasklet struct (scheduled from time.c) */ -DECLARE_TASKLET_DISABLED(led_tasklet, led_tasklet_func, 0); + if (currentleds != lastleds) + { + led_func_ptr(currentleds); /* Update the LCD/LEDs */ + lastleds = currentleds; + } + queue_delayed_work(led_wq, &led_task, LED_UPDATE_INTERVAL); +} /* ** led_halt() @@ -522,9 +513,13 @@ static int led_halt(struct notifier_block *nb, unsigned long event, void *buf) default: return NOTIFY_DONE; } - /* completely stop the LED/LCD tasklet */ - tasklet_disable(&led_tasklet); - + /* Cancel the work item and delete the queue */ + if (led_wq) { + cancel_rearming_delayed_workqueue(led_wq, &led_task); + destroy_workqueue(led_wq); + led_wq = NULL; + } + if (lcd_info.model == DISPLAY_MODEL_LCD) lcd_print(txt); else @@ -559,7 +554,6 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d printk(KERN_INFO "LCD display at %lx,%lx registered\n", LCD_CMD_REG , LCD_DATA_REG); led_func_ptr = led_LCD_driver; - lcd_print( lcd_text_default ); led_type = LED_HASLCD; break; @@ -589,9 +583,11 @@ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long d initialized++; register_reboot_notifier(&led_notifier); - /* start the led tasklet for the first time */ - tasklet_enable(&led_tasklet); - + /* Ensure the work is queued */ + if (led_wq) { + queue_work(led_wq, &led_task); + } + return 0; } @@ -626,8 +622,8 @@ void __init register_led_regions(void) ** lcd_print() ** ** Displays the given string on the LCD-Display of newer machines. - ** lcd_print() disables the timer-based led tasklet during its - ** execution and enables it afterwards again. + ** lcd_print() disables/enables the timer-based led work queue to + ** avoid a race condition while writing the CMD/DATA register pair. ** */ int lcd_print( char *str ) @@ -637,12 +633,13 @@ int lcd_print( char *str ) if (!led_func_ptr || lcd_info.model != DISPLAY_MODEL_LCD) return 0; - /* temporarily disable the led tasklet */ - tasklet_disable(&led_tasklet); + /* temporarily disable the led work task */ + if (led_wq) + cancel_rearming_delayed_workqueue(led_wq, &led_task); /* copy display string to buffer for procfs */ strlcpy(lcd_text, str, sizeof(lcd_text)); - + /* Set LCD Cursor to 1st character */ gsc_writeb(lcd_info.reset_cmd1, LCD_CMD_REG); udelay(lcd_info.min_cmd_delay); @@ -656,8 +653,10 @@ int lcd_print( char *str ) udelay(lcd_info.min_cmd_delay); } - /* re-enable the led tasklet */ - tasklet_enable(&led_tasklet); + /* re-queue the work */ + if (led_wq) { + queue_work(led_wq, &led_task); + } return lcd_info.lcd_width; } diff --git a/include/asm-parisc/led.h b/include/asm-parisc/led.h index 1ac8ab6c580d..efadfd543ec6 100644 --- a/include/asm-parisc/led.h +++ b/include/asm-parisc/led.h @@ -23,9 +23,6 @@ #define LED_CMD_REG_NONE 0 /* NULL == no addr for the cmd register */ -/* led tasklet struct */ -extern struct tasklet_struct led_tasklet; - /* register_led_driver() */ int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long data_reg); -- GitLab From 413059f28e9949d9ad2d04d1070c63169798176e Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:46:48 -0400 Subject: [PATCH 0359/1519] [PARISC] Replace uses of __LP64__ with CONFIG_64BIT 2.6.12-rc4-pa3 s/__LP64__/CONFIG_64BIT/ and fixup config.h usage Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/entry.S | 98 +++++++++++++++--------------- arch/parisc/kernel/head.S | 26 ++++---- arch/parisc/kernel/pacache.S | 30 ++++----- arch/parisc/kernel/real2.S | 16 ++--- arch/parisc/kernel/smp.c | 2 +- arch/parisc/kernel/syscall.S | 37 ++++++----- arch/parisc/kernel/syscall_table.S | 4 +- 7 files changed, 108 insertions(+), 105 deletions(-) diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index ec04e0ad77fa..0ca49710d95e 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -37,7 +37,7 @@ #include #include -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define CMPIB cmpib,* #define CMPB cmpb,* #define COND(x) *x @@ -217,7 +217,7 @@ va = r8 /* virtual address for which the trap occured */ spc = r24 /* space for which the trap occured */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * itlb miss interruption handler (parisc 1.1 - 32 bit) @@ -239,7 +239,7 @@ .macro itlb_20 code mfctl %pcsq, spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b itlb_miss_20w #else b itlb_miss_20 @@ -249,7 +249,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * naitlb miss interruption handler (parisc 1.1 - 32 bit) * @@ -286,7 +286,7 @@ .macro naitlb_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b itlb_miss_20w #else b itlb_miss_20 @@ -299,7 +299,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * dtlb miss interruption handler (parisc 1.1 - 32 bit) */ @@ -321,7 +321,7 @@ .macro dtlb_20 code mfctl %isr, spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b dtlb_miss_20w #else b dtlb_miss_20 @@ -331,7 +331,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */ .macro nadtlb_11 code @@ -349,7 +349,7 @@ .macro nadtlb_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b nadtlb_miss_20w #else b nadtlb_miss_20 @@ -359,7 +359,7 @@ .align 32 .endm -#ifndef __LP64__ +#ifndef CONFIG_64BIT /* * dirty bit trap interruption handler (parisc 1.1 - 32 bit) */ @@ -381,7 +381,7 @@ .macro dbit_20 code mfctl %isr,spc -#ifdef __LP64__ +#ifdef CONFIG_64BIT b dbit_trap_20w #else b dbit_trap_20 @@ -394,7 +394,7 @@ /* The following are simple 32 vs 64 bit instruction * abstractions for the macros */ .macro EXTR reg1,start,length,reg2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u \reg1,32+\start,\length,\reg2 #else extrw,u \reg1,\start,\length,\reg2 @@ -402,7 +402,7 @@ .endm .macro DEP reg1,start,length,reg2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depd \reg1,32+\start,\length,\reg2 #else depw \reg1,\start,\length,\reg2 @@ -410,7 +410,7 @@ .endm .macro DEPI val,start,length,reg -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi \val,32+\start,\length,\reg #else depwi \val,\start,\length,\reg @@ -421,7 +421,7 @@ * fault. We have to extract this and place it in the va, * zeroing the corresponding bits in the space register */ .macro space_adjust spc,va,tmp -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u \spc,63,SPACEID_SHIFT,\tmp depd %r0,63,SPACEID_SHIFT,\spc depd \tmp,31,SPACEID_SHIFT,\va @@ -479,7 +479,7 @@ bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ copy \pmd,%r9 -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r9,PxD_VALUE_SHIFT,\pmd #else shlw %r9,PxD_VALUE_SHIFT,\pmd @@ -610,7 +610,7 @@ .macro do_alias spc,tmp,tmp1,va,pte,prot,fault cmpib,COND(<>),n 0,\spc,\fault ldil L%(TMPALIAS_MAP_START),\tmp -#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000) +#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000) /* on LP64, ldi will sign extend into the upper 32 bits, * which is behaviour we don't want */ depdi 0,31,32,\tmp @@ -624,7 +624,7 @@ * OK, it is in the temp alias region, check whether "from" or "to". * Check "subtle" note in pacache.S re: r23/r26. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u,*= \va,41,1,%r0 #else extrw,u,= \va,9,1,%r0 @@ -691,7 +691,7 @@ fault_vector_20: def 30 def 31 -#ifndef __LP64__ +#ifndef CONFIG_64BIT .export fault_vector_11 @@ -764,7 +764,7 @@ __kernel_thread: copy %r30, %r1 ldo PT_SZ_ALGN(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Yo, function pointers in wide mode are little structs... -PB */ ldd 24(%r26), %r2 STREG %r2, PT_GR27(%r1) /* Store childs %dp */ @@ -780,7 +780,7 @@ __kernel_thread: or %r26, %r24, %r26 /* will have kernel mappings. */ ldi 1, %r25 /* stack_start, signals kernel thread */ stw %r0, -52(%r30) /* user_tid */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL do_fork, %r2 @@ -809,7 +809,7 @@ ret_from_kernel_thread: LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1 LDREG TASK_PT_GR25(%r1), %r26 -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG TASK_PT_GR27(%r1), %r27 LDREG TASK_PT_GR22(%r1), %r22 #endif @@ -817,7 +817,7 @@ ret_from_kernel_thread: ble 0(%sr7, %r1) copy %r31, %r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ loadgp /* Thread could have been in a module */ #endif @@ -838,7 +838,7 @@ __execve: STREG %r26, PT_GR26(%r16) STREG %r25, PT_GR25(%r16) STREG %r24, PT_GR24(%r16) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL sys_execve, %r2 @@ -916,7 +916,7 @@ syscall_exit_rfi: STREG %r19,PT_IAOQ1(%r16) LDREG PT_PSW(%r16),%r19 load32 USER_PSW_MASK,%r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT load32 USER_PSW_HI_MASK,%r20 depd %r20,31,32,%r1 #endif @@ -960,7 +960,7 @@ intr_return: /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount ** irq_stat[] is defined using ____cacheline_aligned. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r1, 6, %r20 #else shlw %r1, 5, %r20 @@ -1018,7 +1018,7 @@ intr_restore: .import do_softirq,code intr_do_softirq: BL do_softirq,%r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #else nop @@ -1036,7 +1036,7 @@ intr_do_resched: CMPIB= 0,%r20,intr_restore /* backward */ nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1069,7 +1069,7 @@ intr_do_signal: copy %r0, %r24 /* unsigned long in_syscall */ copy %r16, %r25 /* struct pt_regs *regs */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1093,7 +1093,7 @@ intr_extint: mfctl %cr31,%r1 copy %r30,%r17 /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/ -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi 0,63,15,%r17 #else depi 0,31,15,%r17 @@ -1120,7 +1120,7 @@ intr_extint: ldil L%intr_return, %r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1164,7 +1164,7 @@ intr_save: mfctl %cr21, %r17 /* ior */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* * If the interrupted code was running with W bit off (32 bit), * clear the b bits (bits 0 & 1) in the ior. @@ -1199,7 +1199,7 @@ skip_save_ior: loadgp copy %r29, %r25 /* arg1 is pt_regs */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1237,7 +1237,7 @@ skip_save_ior: spc = r24 /* space for which the trap occured */ ptp = r25 /* page directory/page table pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT dtlb_miss_20w: space_adjust spc,va,t0 @@ -1528,7 +1528,7 @@ nadtlb_probe_check: nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT itlb_miss_20w: /* @@ -1595,7 +1595,7 @@ itlb_miss_20: #endif -#ifdef __LP64__ +#ifdef CONFIG_64BIT dbit_trap_20w: space_adjust spc,va,t0 @@ -1804,7 +1804,7 @@ sys_fork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1854,7 +1854,7 @@ sys_clone_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1876,7 +1876,7 @@ sys_vfork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1904,7 +1904,7 @@ sys_vfork_wrapper: STREG %r2,-RP_OFFSET(%r30) ldo FRAME_SIZE(%r30),%r30 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL \execve,%r2 @@ -1930,7 +1930,7 @@ error_\execve: sys_execve_wrapper: execve_wrapper sys_execve -#ifdef __LP64__ +#ifdef CONFIG_64BIT .export sys32_execve_wrapper .import sys32_execve @@ -1944,7 +1944,7 @@ sys_rt_sigreturn_wrapper: ldo TASK_REGS(%r26),%r26 /* get pt regs */ /* Don't save regs, we are going to restore them from sigcontext. */ STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 BL sys_rt_sigreturn,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -1975,7 +1975,7 @@ sys_sigaltstack_wrapper: ldo TASK_REGS(%r1),%r24 /* get pt regs */ LDREG TASK_PT_GR30(%r24),%r24 STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 b,l do_sigaltstack,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -1989,7 +1989,7 @@ sys_sigaltstack_wrapper: bv %r0(%r2) nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT .export sys32_sigaltstack_wrapper sys32_sigaltstack_wrapper: /* Get the user stack pointer */ @@ -2013,7 +2013,7 @@ sys_rt_sigsuspend_wrapper: reg_save %r24 STREG %r2, -RP_OFFSET(%r30) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo FRAME_SIZE(%r30), %r30 b,l sys_rt_sigsuspend,%r2 ldo -16(%r30),%r29 /* Reference param save area */ @@ -2086,7 +2086,7 @@ syscall_check_bh: ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */ /* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT shld %r26, 6, %r20 #else shlw %r26, 5, %r20 @@ -2151,7 +2151,7 @@ syscall_restore: depi 3,31,2,%r31 /* ensure return to user mode. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* decide whether to reset the wide mode bit * * For a syscall, the W bit is stored in the lowest bit @@ -2247,7 +2247,7 @@ syscall_do_softirq: .import schedule,code syscall_do_resched: BL schedule,%r2 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #else nop @@ -2267,7 +2267,7 @@ syscall_do_signal: ldi 1, %r24 /* unsigned long in_syscall */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif BL do_signal,%r2 diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 2b8738576ec2..0b47afc20690 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -12,7 +12,7 @@ * Initial Version 04-23-1999 by Helge Deller */ -#include /* for CONFIG_SMP */ +#include /* for CONFIG_SMP */ #include #include @@ -36,10 +36,10 @@ boot_args: .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ .import $global$ /* forward declaration */ -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ .export stext .export _stext,data /* Kernel want it this way! */ _stext: @@ -76,7 +76,7 @@ $bss_loop: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Set pmd in pgd */ load32 PA(pmd0),%r5 shrd %r5,PxD_VALUE_SHIFT,%r3 @@ -99,7 +99,7 @@ $bss_loop: stw %r3,0(%r4) ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 addib,> -1,%r1,1b -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 #else ldo ASM_PGD_ENTRY_SIZE(%r4),%r4 @@ -170,7 +170,7 @@ common_stext: stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ #endif /*CONFIG_SMP*/ -#ifdef __LP64__ +#ifdef CONFIG_64BIT tophys_r1 %sp /* Save the rfi target address */ @@ -233,7 +233,7 @@ stext_pdc_ret: * following short sequence of instructions can determine this * (without being illegal on a PA1.1 machine). */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT ldi 32,%r10 mtctl %r10,%cr11 .level 2.0 @@ -246,7 +246,7 @@ stext_pdc_ret: $is_pa20: .level LEVEL /* restore 1.1 || 2.0w */ -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ load32 PA(fault_vector_20),%r10 $install_iva: @@ -284,7 +284,7 @@ aligned_rfi: .import smp_init_current_idle_task,data .import smp_callin,code -#ifndef __LP64__ +#ifndef CONFIG_64BIT smp_callin_rtn: .proc .callinfo @@ -292,7 +292,7 @@ smp_callin_rtn: nop nop .procend -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ /*************************************************************************** * smp_slave_stext is executed by all non-monarch Processors when the Monarch @@ -327,7 +327,7 @@ smp_slave_stext: mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Setup PDCE_PROC entry */ copy %arg0,%r3 #else @@ -344,7 +344,7 @@ smp_slave_stext: .procend #endif /* CONFIG_SMP */ -#ifndef __LP64__ +#ifndef CONFIG_64BIT .data .align 4 @@ -354,4 +354,4 @@ smp_slave_stext: .size $global$,4 $global$: .word 0 -#endif /*!LP64*/ +#endif /*!CONFIG_64BIT*/ diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 71ade44c4618..4a7d9c8903f4 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -26,7 +26,7 @@ * can be used. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT #define ADDIB addib,* #define CMPB cmpb,* #define ANDCM andcm,* @@ -40,6 +40,8 @@ .level 2.0 #endif +#include + #include #include #include @@ -294,7 +296,7 @@ copy_user_page_asm: .callinfo NO_CALLS .entry -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* PA8x00 CPUs can consume 2 loads or 1 store per cycle. * Unroll the loop by hand and arrange insn appropriately. * GCC probably can do this just as well. @@ -454,7 +456,7 @@ copy_user_page_asm: sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */ ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */ extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ @@ -541,7 +543,7 @@ __clear_user_page_asm: tophys_r1 %r26 ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ #endif @@ -558,7 +560,7 @@ __clear_user_page_asm: pdtlb 0(%r28) -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldi 32, %r1 /* PAGE_SIZE/128 == 32 */ /* PREFETCH (Write) has not (yet) been proven to help here */ @@ -583,7 +585,7 @@ __clear_user_page_asm: ADDIB> -1, %r1, 1b ldo 128(%r28), %r28 -#else /* ! __LP64 */ +#else /* ! CONFIG_64BIT */ ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ @@ -606,7 +608,7 @@ __clear_user_page_asm: stw %r0, 60(%r28) ADDIB> -1, %r1, 1b ldo 64(%r28), %r28 -#endif /* __LP64 */ +#endif /* CONFIG_64BIT */ bv %r0(%r2) nop @@ -624,7 +626,7 @@ flush_kernel_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -668,7 +670,7 @@ flush_user_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1,63-PAGE_SHIFT,1, %r25 #else depwi,z 1,31-PAGE_SHIFT,1, %r25 @@ -712,7 +714,7 @@ flush_user_icache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -757,7 +759,7 @@ purge_kernel_dcache_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 @@ -805,7 +807,7 @@ flush_alias_page: tophys_r1 %r26 ldil L%(TMPALIAS_MAP_START), %r28 -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ depdi 0, 63,12, %r28 /* Clear any offset bits */ @@ -822,7 +824,7 @@ flush_alias_page: ldil L%dcache_stride, %r1 ldw R%dcache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r29 #else depwi,z 1, 31-PAGE_SHIFT,1, %r29 @@ -933,7 +935,7 @@ flush_kernel_icache_page: ldil L%icache_stride, %r1 ldw R%icache_stride(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT depdi,z 1, 63-PAGE_SHIFT,1, %r25 #else depwi,z 1, 31-PAGE_SHIFT,1, %r25 diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 2310fc1b06a9..085bff7c569d 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -7,6 +7,8 @@ * Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com) * */ +#include + #include #include @@ -20,7 +22,7 @@ real32_stack: real64_stack: .block 8192 -#ifdef __LP64__ +#ifdef CONFIG_64BIT # define REG_SZ 8 #else # define REG_SZ 4 @@ -50,7 +52,7 @@ save_cr_end: real32_call_asm: STREG %rp, -RP_OFFSET(%sp) /* save RP */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT callee_save ldo 2*REG_SZ(%sp), %sp /* room for a couple more saves */ STREG %r27, -1*REG_SZ(%sp) @@ -77,7 +79,7 @@ real32_call_asm: b,l save_control_regs,%r2 /* modifies r1, r2, r28 */ nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT rsm PSW_SM_W, %r0 /* go narrow */ #endif @@ -85,7 +87,7 @@ real32_call_asm: bv 0(%r31) nop ric_ret: -#ifdef __LP64__ +#ifdef CONFIG_64BIT ssm PSW_SM_W, %r0 /* go wide */ #endif /* restore CRs before going virtual in case we page fault */ @@ -97,7 +99,7 @@ ric_ret: tovirt_r1 %sp LDREG -REG_SZ(%sp), %sp /* restore SP */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG -1*REG_SZ(%sp), %r27 LDREG -2*REG_SZ(%sp), %r29 ldo -2*REG_SZ(%sp), %sp @@ -212,7 +214,7 @@ rfi_r2v_1: bv 0(%r2) nop -#ifdef __LP64__ +#ifdef CONFIG_64BIT /************************ 64-bit real-mode calls ***********************/ /* This is only usable in wide kernels right now and will probably stay so */ @@ -290,7 +292,7 @@ pc_in_user_space: ** comparing function pointers. */ __canonicalize_funcptr_for_compare: -#ifdef __LP64__ +#ifdef CONFIG_64BIT bve (%r2) #else bv %r0(%r2) diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index bcc7e83f5142..5db3be4e2704 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -18,7 +18,7 @@ */ #undef ENTRY_SYS_CPUS /* syscall support for iCOD-like functionality */ -#include +#include #include #include diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 8c7a7185cd3b..b29b76b42bb7 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -6,6 +6,7 @@ * thanks to Philipp Rumpf, Mike Shaver and various others * sorry about the wall, puffin.. */ +#include /* for CONFIG_SMP */ #include #include @@ -22,15 +23,13 @@ */ #define KILL_INSN break 0,0 -#include /* for CONFIG_SMP */ - -#ifdef __LP64__ +#ifdef CONFIG_64BIT .level 2.0w #else .level 1.1 #endif -#ifndef __LP64__ +#ifndef CONFIG_64BIT .macro fixup_branch,lbl b \lbl .endm @@ -103,7 +102,7 @@ linux_gateway_entry: mfsp %sr7,%r1 /* save user sr7 */ mtsp %r1,%sr3 /* and store it in sr3 */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* for now we can *always* set the W bit on entry to the syscall * since we don't support wide userland processes. We could * also save the current SM other than in r0 and restore it on @@ -155,7 +154,7 @@ linux_gateway_entry: STREG %r19, TASK_PT_GR19(%r1) LDREGM -FRAME_SIZE(%r30), %r2 /* get users sp back */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT extrd,u %r2,63,1,%r19 /* W hidden in bottom bit */ #if 0 xor %r19,%r2,%r2 /* clear bottom bit */ @@ -186,7 +185,7 @@ linux_gateway_entry: loadgp -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ copy %r19,%r2 /* W bit back to r2 */ #else @@ -205,7 +204,7 @@ linux_gateway_entry: /* Note! We cannot use the syscall table that is mapped nearby since the gateway page is mapped execute-only. */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldil L%sys_call_table, %r1 or,= %r2,%r2,%r2 addil L%(sys_call_table64-sys_call_table), %r1 @@ -321,7 +320,7 @@ tracesys_next: LDREG TASK_PT_GR25(%r1), %r25 LDREG TASK_PT_GR24(%r1), %r24 LDREG TASK_PT_GR23(%r1), %r23 -#ifdef __LP64__ +#ifdef CONFIG_64BIT LDREG TASK_PT_GR22(%r1), %r22 LDREG TASK_PT_GR21(%r1), %r21 ldo -16(%r30),%r29 /* Reference param save area */ @@ -350,7 +349,7 @@ tracesys_next: tracesys_exit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG TI_TASK(%r1), %r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif bl syscall_trace, %r2 @@ -371,7 +370,7 @@ tracesys_exit: tracesys_sigexit: ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */ LDREG 0(%r1), %r1 -#ifdef __LP64__ +#ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif bl syscall_trace, %r2 @@ -404,7 +403,7 @@ lws_start: gate .+8, %r0 depi 3, 31, 2, %r31 /* Ensure we return to userspace */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* FIXME: If we are a 64-bit kernel just * turn this on unconditionally. */ @@ -440,7 +439,7 @@ lws_exit_nosys: /* Fall through: Return to userspace */ lws_exit: -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* decide whether to reset the wide mode bit * * For a syscall, the W bit is stored in the lowest bit @@ -486,7 +485,7 @@ lws_exit: /* ELF64 Process entry path */ lws_compare_and_swap64: -#ifdef __LP64__ +#ifdef CONFIG_64BIT b,n lws_compare_and_swap #else /* If we are not a 64-bit kernel, then we don't @@ -497,7 +496,7 @@ lws_compare_and_swap64: /* ELF32 Process entry path */ lws_compare_and_swap32: -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Clip all the input registers */ depdi 0, 31, 32, %r26 depdi 0, 31, 32, %r25 @@ -608,7 +607,7 @@ cas_action: the other for the store. Either return -EFAULT. Each of the entries must be relocated. */ .section __ex_table,"aw" -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Pad the address calculation */ .word 0,(2b - linux_gateway_page) .word 0,(3b - linux_gateway_page) @@ -619,7 +618,7 @@ cas_action: .previous .section __ex_table,"aw" -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* Pad the address calculation */ .word 0,(1b - linux_gateway_page) .word 0,(3b - linux_gateway_page) @@ -638,7 +637,7 @@ end_linux_gateway_page: /* Relocate symbols assuming linux_gateway_page is mapped to virtual address 0x0 */ -#ifdef __LP64__ +#ifdef CONFIG_64BIT /* FIXME: The code will always be on the gateay page and thus it will be on the first 4k, the assembler seems to think that the final @@ -666,7 +665,7 @@ lws_table: sys_call_table: #include "syscall_table.S" -#ifdef __LP64__ +#ifdef CONFIG_64BIT .align 4096 .export sys_call_table64 .Lsys_call_table64: diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 065ab809659d..32cbc0489324 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -35,7 +35,7 @@ #undef ENTRY_UHOH #undef ENTRY_COMP #undef ENTRY_OURS -#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT) +#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT) /* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and * narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific * implementation is required on wide palinux. Use ENTRY_COMP where @@ -46,7 +46,7 @@ #define ENTRY_UHOH(_name_) .dword sys32_##unimplemented #define ENTRY_OURS(_name_) .dword parisc_##_name_ #define ENTRY_COMP(_name_) .dword compat_sys_##_name_ -#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT) +#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT) #define ENTRY_SAME(_name_) .dword sys_##_name_ #define ENTRY_DIFF(_name_) .dword sys_##_name_ #define ENTRY_UHOH(_name_) .dword sys_##_name_ -- GitLab From 3aa0862ce7c120e035bc2aa25997fd000d964d6e Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:47:04 -0400 Subject: [PATCH 0360/1519] [PARISC] Minor iosapic.c cleanup minor cleanup: qualify constant with "UL" Acked-by: "Hmamouche, Youssef" Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- drivers/parisc/iosapic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 7a57c1b8373f..a39fbfef789a 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -244,7 +244,7 @@ static struct irt_entry *iosapic_alloc_irt(int num_entries) * 4-byte alignment on 32-bit kernels */ a = (unsigned long)kmalloc(sizeof(struct irt_entry) * num_entries + 8, GFP_KERNEL); - a = (a + 7) & ~7; + a = (a + 7UL) & ~7UL; return (struct irt_entry *)a; } -- GitLab From 91313d60d8ad96fa79a833e55e8c13b56f893614 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:47:40 -0400 Subject: [PATCH 0361/1519] [PARISC] Add sync required after fdc to enforce insn ordering PA20 arch book (page 7-52 and 7-55) indicate a "sync" is required after the FDC "to enforce instruction ordering". And we want to make sure FIC is executed after FDC has retired. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/signal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 0224651fd8f1..6c905c128c2a 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -636,6 +636,7 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall) /* Stack is 64-byte aligned, and we only * need to flush 1 cache line */ asm("fdc 0(%%sr3, %0)\n" + "sync\n" "fic 0(%%sr3, %0)\n" "sync\n" : : "r"(regs->gr[30])); -- GitLab From 7efe1611b2db9025ffc52a686897ab91820caeb4 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 21 Oct 2005 22:48:03 -0400 Subject: [PATCH 0362/1519] [PARISC] Initialize serial spinlocks in superio.c git commit 976ecd12b8144d066a23fe97c6fbfc1ac8470af7 changed our locking characteristics, and put the onus of spin_lock_init on superio.c. Signed-off-by: Kyle McMartin --- drivers/parisc/superio.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index e0efed796b92..bab3bcabcb6e 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -11,6 +11,7 @@ * (C) Copyright 2000 Alex deVries * (C) Copyright 2001 John Marvin * (C) Copyright 2003 Grant Grundler + * (C) Copyright 2005 Kyle McMartin * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -405,6 +406,7 @@ static void __devinit superio_serial_init(void) serial[0].iobase = sio_dev.sp1_base; serial[0].irq = SP1_IRQ; + spin_lock_init(&serial[0].lock); retval = early_serial_setup(&serial[0]); if (retval < 0) { @@ -414,6 +416,7 @@ static void __devinit superio_serial_init(void) serial[1].iobase = sio_dev.sp2_base; serial[1].irq = SP2_IRQ; + spin_lock_init(&serial[1].lock); retval = early_serial_setup(&serial[1]); if (retval < 0) -- GitLab From fa681a1800a58234afe4d876c1752c0751826d22 Mon Sep 17 00:00:00 2001 From: Randolph Chung Date: Fri, 21 Oct 2005 22:48:34 -0400 Subject: [PATCH 0363/1519] [PARISC] Disable use of fpregs in pa_memcpy Disable use of fpregs in pa_memcpy, and turn on the -mdisable-fpregs flag. Signed-off-by: Randolph Chung Signed-off-by: Kyle McMartin --- arch/parisc/Makefile | 2 +- arch/parisc/lib/memcpy.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 3b339b1cce13..e3549f480fa5 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -43,7 +43,7 @@ cflags-y += -mno-space-regs -mfast-indirect-calls # Currently we save and restore fpregs on all kernel entry/interruption paths. # If that gets optimized, we might need to disable the use of fpregs in the # kernel. -#cflags-y += -mdisable-fpregs +cflags-y += -mdisable-fpregs # Without this, "ld -r" results in .text sections that are too big # (> 0x40000) for branches to reach stubs. diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index feb1b9f42c2b..b7098035321f 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -339,6 +339,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) pds = (double *)pcs; pdd = (double *)pcd; +#if 0 /* Copy 8 doubles at a time */ while (len >= 8*sizeof(double)) { register double r1, r2, r3, r4, r5, r6, r7, r8; @@ -366,6 +367,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len) fstdma(d_space, r8, pdd, pmc_store_exc); len -= 8*sizeof(double); } +#endif pws = (unsigned int *)pds; pwd = (unsigned int *)pdd; -- GitLab From 74d13f84a9905e02a025d952ced6abb2e064f1c1 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:49:05 -0400 Subject: [PATCH 0364/1519] [PARISC] Fix compile warning in pci.h Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- include/asm-parisc/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h index d0b761f690b5..fa39d07d49e9 100644 --- a/include/asm-parisc/pci.h +++ b/include/asm-parisc/pci.h @@ -69,7 +69,7 @@ struct pci_hba_data { #define PCI_PORT_HBA(a) ((a) >> HBA_PORT_SPACE_BITS) #define PCI_PORT_ADDR(a) ((a) & (HBA_PORT_SPACE_SIZE - 1)) -#if CONFIG_64BIT +#ifdef CONFIG_64BIT #define PCI_F_EXTEND 0xffffffff00000000UL #define PCI_IS_LMMIO(hba,a) pci_is_lmmio(hba,a) -- GitLab From eba917273eb8579dd8ae36f6645518ca5579a2ab Mon Sep 17 00:00:00 2001 From: Thibaut Varene Date: Fri, 21 Oct 2005 22:49:25 -0400 Subject: [PATCH 0365/1519] [PARISC] Add printing of fpregs state to stack dump We're using fp regs now in the kernel, so we want to print them on stack dump Signed-off-by: Thibaut VARENE Signed-off-by: Kyle McMartin --- arch/parisc/kernel/traps.c | 37 +++++++++++++++++++++++++++++++------ 1 file changed, 31 insertions(+), 6 deletions(-) diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index d2e5b229a2f4..15914f0235a0 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -74,7 +74,10 @@ void show_regs(struct pt_regs *regs) char *level; unsigned long cr30; unsigned long cr31; - + /* carlos says that gcc understands better memory in a struct, + * and it makes our life easier with fpregs -- T-Bone */ + struct { u32 sw[2]; } s; + level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT; printk("%s\n", level); /* don't want to have that pretty register dump messed up */ @@ -103,11 +106,33 @@ void show_regs(struct pt_regs *regs) printk("%s\n", buf); } -#if RIDICULOUSLY_VERBOSE - for (i = 0; i < 32; i += 2) - printk("%sFR%02d : %016lx FR%2d : %016lx", level, i, - regs->fr[i], i+1, regs->fr[i+1]); -#endif + /* FR are 64bit everywhere. Need to use asm to get the content + * of fpsr/fper1, and we assume that we won't have a FP Identify + * in our way, otherwise we're screwed. + * The fldd is used to restore the T-bit if there was one, as the + * store clears it anyway. + * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */ + __asm__ ( + "fstd %%fr0,0(%1) \n\t" + "fldd 0(%1),%%fr0 \n\t" + : "=m" (s) : "r" (&s) : "%r0" + ); + + printk("%s\n", level); + printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level); + printbinary(buf, s.sw[0], 32); + printk("%sFPSR: %s\n", level, buf); + printk("%sFPER1: %08x\n", level, s.sw[1]); + + /* here we'll print fr0 again, tho it'll be meaningless */ + for (i = 0; i < 32; i += 4) { + int j; + p = buf; + p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3); + for (j = 0; j < 4; j++) + p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]); + printk("%s\n", buf); + } cr30 = mfctl(30); cr31 = mfctl(31); -- GitLab From 40c72f20e89300dfaea28300ee17aa56d230d63f Mon Sep 17 00:00:00 2001 From: Randolph Chung Date: Fri, 21 Oct 2005 22:49:47 -0400 Subject: [PATCH 0366/1519] [PARISC] Prevent signal loops if we have a problem setting up a frame 2.6.13-rc6-pa2 use force_sigsegv() if we have a problem setting up a frame. This is required to prevent SIGSEGV loops. Signed-off-by: Randolph Chung Signed-off-by: Kyle McMartin --- arch/parisc/kernel/signal.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 6c905c128c2a..befdfe700616 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -490,15 +490,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, give_sigsegv: DBG(1,"setup_rt_frame: sending SIGSEGV\n"); - if (sig == SIGSEGV) - ka->sa.sa_handler = SIG_DFL; - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = current->pid; - si.si_uid = current->uid; - si.si_addr = frame; - force_sig_info(SIGSEGV, &si, current); + force_sigsegv(sig, current); return 0; } -- GitLab From 7c92e972da0dd5b6a9ddf01030aab7dec9912b1f Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:50:06 -0400 Subject: [PATCH 0367/1519] [PARISC] Update pdc console from parisc tree Get rid of some unnecessary includes Remove a layer of macro indirection around pdc_console_device Delete pdc_console_die() as it is unused Avoid double-printing on panic by clearing CON_PRINTBUFFER rather than setting con_start to be log_end Make con_start and log_end static again Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- arch/parisc/kernel/pdc_cons.c | 46 ++++++++--------------------------- 1 file changed, 10 insertions(+), 36 deletions(-) diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 01f676d1673b..215d78c87bc5 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -41,7 +41,7 @@ /* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems. * On production kernels EARLY_BOOTUP_DEBUG should be undefined. */ -#undef EARLY_BOOTUP_DEBUG +#define EARLY_BOOTUP_DEBUG #include @@ -49,14 +49,8 @@ #include #include #include -#include -#include -#include #include #include -#include -#include -#include #include /* for iodc_call() proto and friends */ @@ -96,7 +90,6 @@ static int pdc_console_setup(struct console *co, char *options) } #if defined(CONFIG_PDC_CONSOLE) -#define PDC_CONSOLE_DEVICE pdc_console_device static struct tty_driver * pdc_console_device (struct console *c, int *index) { extern struct tty_driver console_driver; @@ -104,22 +97,19 @@ static struct tty_driver * pdc_console_device (struct console *c, int *index) return &console_driver; } #else -#define PDC_CONSOLE_DEVICE NULL +#define pdc_console_device NULL #endif static struct console pdc_cons = { .name = "ttyB", .write = pdc_console_write, - .device = PDC_CONSOLE_DEVICE, + .device = pdc_console_device, .setup = pdc_console_setup, - .flags = CON_BOOT|CON_PRINTBUFFER|CON_ENABLED, + .flags = CON_BOOT | CON_PRINTBUFFER | CON_ENABLED, .index = -1, }; static int pdc_console_initialized; -extern unsigned long con_start; /* kernel/printk.c */ -extern unsigned long log_end; /* kernel/printk.c */ - static void pdc_console_init_force(void) { @@ -146,27 +136,11 @@ void __init pdc_console_init(void) } -/* Unregister the pdc console with the printk console layer */ -void pdc_console_die(void) -{ - if (!pdc_console_initialized) - return; - --pdc_console_initialized; - - printk(KERN_INFO "Switching from PDC console\n"); - - /* Don't repeat what we've already printed */ - con_start = log_end; - - unregister_console(&pdc_cons); -} - - /* * Used for emergencies. Currently only used if an HPMC occurs. If an * HPMC occurs, it is possible that the current console may not be - * properly initialed after the PDC IO reset. This routine unregisters all - * of the current consoles, reinitializes the pdc console and + * properly initialised after the PDC IO reset. This routine unregisters + * all of the current consoles, reinitializes the pdc console and * registers it. */ @@ -177,13 +151,13 @@ void pdc_console_restart(void) if (pdc_console_initialized) return; + /* If we've already seen the output, don't bother to print it again */ + if (console_drivers != NULL) + pdc_cons.flags &= ~CON_PRINTBUFFER; + while ((console = console_drivers) != NULL) unregister_console(console_drivers); - /* Don't repeat what we've already printed */ - con_start = log_end; - /* force registering the pdc console */ pdc_console_init_force(); } - -- GitLab From 8054f03f6330f20e9d47e2f6c7b1d01ddf5adeef Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:50:33 -0400 Subject: [PATCH 0368/1519] [PARISC] More informative error message in pcibios_link_hba_resources Generate a more informative message when a resource does not have a parent. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index e6a891a0cad0..88cba49c5301 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -202,7 +202,8 @@ static void pcibios_link_hba_resources( struct resource *hba_res, struct resource *r) { if (!r->parent) { - printk(KERN_EMERG "PCI: Tell willy he's wrong\n"); + printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n", + r->start, r->end); r->parent = hba_res; /* reverse link is harder *sigh* */ -- GitLab From b8db800295fd31f8beb39fd1de63660aa7aef47b Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:50:48 -0400 Subject: [PATCH 0369/1519] [PARISC] Cleanup whitespace and handle proc_mkdir() failures in pci-dma.c 1) cleanup whitespace and handle proc_mkdir() failures. From: Christophe Lucas 2) rename "dino" entry to "pcxl_dma"...also seems like it's in the wrong location. 3) don't dump resource bitmap in /proc/pcxl_dma output 4) fixup compiler warning Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/pci-dma.c | 48 ++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 18 deletions(-) diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 368cc095c99f..d9b447cb1a0d 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -31,7 +31,7 @@ #include /* get_order */ #include #include - +#include /* for purge_tlb_*() macros */ static struct proc_dir_entry * proc_gsc_root = NULL; static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length); @@ -333,18 +333,28 @@ pcxl_free_range(unsigned long vaddr, size_t size) static int __init pcxl_dma_init(void) { - if (pcxl_dma_start == 0) - return 0; + if (pcxl_dma_start == 0) + return 0; - spin_lock_init(&pcxl_res_lock); - pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); - pcxl_res_hint = 0; - pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, + spin_lock_init(&pcxl_res_lock); + pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3); + pcxl_res_hint = 0; + pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL, get_order(pcxl_res_size)); - memset(pcxl_res_map, 0, pcxl_res_size); - proc_gsc_root = proc_mkdir("gsc", 0); - create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info); - return 0; + memset(pcxl_res_map, 0, pcxl_res_size); + proc_gsc_root = proc_mkdir("gsc", 0); + if (!proc_gsc_root) + printk(KERN_WARNING + "pcxl_dma_init: Unable to create gsc /proc dir entry\n"); + else { + struct proc_dir_entry* ent; + ent = create_proc_info_entry("pcxl_dma", 0, + proc_gsc_root, pcxl_proc_info); + if (!ent) + printk(KERN_WARNING + "pci-dma.c: Unable to create pcxl_dma /proc entry.\n"); + } + return 0; } __initcall(pcxl_dma_init); @@ -545,16 +555,16 @@ struct hppa_dma_ops pcx_dma_ops = { static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) { +#if 0 u_long i = 0; unsigned long *res_ptr = (u_long *)pcxl_res_map; - unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ +#endif + unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */ - sprintf(buf, "\nDMA Mapping Area size : %d bytes (%d pages)\n", - PCXL_DMA_MAP_SIZE, - (pcxl_res_size << 3) ); /* 1 bit per page */ + sprintf(buf, "\nDMA Mapping Area size : %d bytes (%ld pages)\n", + PCXL_DMA_MAP_SIZE, total_pages); - sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n", - buf, pcxl_res_size, pcxl_res_size << 3); /* 8 bits per byte */ + sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size); strcat(buf, " total: free: used: % used:\n"); sprintf(buf, "%sblocks %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size, @@ -564,7 +574,8 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) sprintf(buf, "%spages %8ld %8ld %8ld %8ld%%\n", buf, total_pages, total_pages - pcxl_used_pages, pcxl_used_pages, (pcxl_used_pages * 100 / total_pages)); - + +#if 0 strcat(buf, "\nResource bitmap:"); for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) { @@ -572,6 +583,7 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len) strcat(buf,"\n "); sprintf(buf, "%s %08lx", buf, *res_ptr); } +#endif strcat(buf, "\n"); return strlen(buf); } -- GitLab From c8e8b1937a788ec46ee11d84437311d4cb8be218 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 21 Oct 2005 22:51:23 -0400 Subject: [PATCH 0370/1519] [PARISC] kfree cleanups to ioctl32.c 2.6.12-rc2-pa2 kfree cleanups from Jesper Juhl Signed-off-by: Jesper Juhl Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/ioctl32.c | 32 +++++++++----------------------- 1 file changed, 9 insertions(+), 23 deletions(-) diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c index 1d3824b670d1..8cad8f004f00 100644 --- a/arch/parisc/kernel/ioctl32.c +++ b/arch/parisc/kernel/ioctl32.c @@ -104,12 +104,9 @@ static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) } out: - if (kversion.name) - kfree(kversion.name); - if (kversion.date) - kfree(kversion.date); - if (kversion.desc) - kfree(kversion.desc); + kfree(kversion.name); + kfree(kversion.date); + kfree(kversion.desc); return ret; } @@ -166,9 +163,7 @@ static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long a ret = -EFAULT; } - if (karg.unique != NULL) - kfree(karg.unique); - + kfree(karg.unique); return ret; } @@ -265,7 +260,6 @@ static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) } kfree(karg.list); - return ret; } @@ -305,7 +299,6 @@ static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) out: kfree(karg.list); - return ret; } @@ -494,15 +487,10 @@ static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) } out: - if (karg.send_indices) - kfree(karg.send_indices); - if (karg.send_sizes) - kfree(karg.send_sizes); - if (karg.request_indices) - kfree(karg.request_indices); - if (karg.request_sizes) - kfree(karg.request_sizes); - + kfree(karg.send_indices); + kfree(karg.send_sizes); + kfree(karg.request_indices); + kfree(karg.request_sizes); return ret; } @@ -555,9 +543,7 @@ static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) ret = -EFAULT; } - if (karg.contexts) - kfree(karg.contexts); - + kfree(karg.contexts); return ret; } -- GitLab From 675ec7a56a77da2dda27180c95ee82ae4879142a Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:51:40 -0400 Subject: [PATCH 0371/1519] [PARISC] Document history of PDC_NARROW as it is now obsolete Document history of PDC_NARROW a bit as it will still show up in an older kernel's .config file. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/firmware.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index f244fb200db1..553f8fe03224 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -83,15 +83,15 @@ static unsigned long pdc_result2[32] __attribute__ ((aligned (8))); int parisc_narrow_firmware = 1; #endif -/* on all currently-supported platforms, IODC I/O calls are always - * 32-bit calls, and MEM_PDC calls are always the same width as the OS. - * This means Cxxx boxes can't run wide kernels right now. -PB +/* On most currently-supported platforms, IODC I/O calls are 32-bit calls + * and MEM_PDC calls are always the same width as the OS. + * Some PAT boxes may have 64-bit IODC I/O. * - * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on - * systems with 32-bit MEM_PDC calls. This will allow wide kernels to - * run on Cxxx boxes now. -RB - * - * Note that some PAT boxes may have 64-bit IODC I/O... + * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow + * 64-bit kernels to run on systems with 32-bit MEM_PDC calls. + * This allowed wide kernels to run on Cxxx boxes. + * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode + * when running a 64-bit kernel on such boxes (e.g. C200 or C360). */ #ifdef __LP64__ -- GitLab From 5beb5f32c56b70f79117e13a1abd54824a78466c Mon Sep 17 00:00:00 2001 From: Randolph Chung Date: Fri, 21 Oct 2005 22:52:00 -0400 Subject: [PATCH 0372/1519] [PARISC] Update minimum compiler version and CROSS_COMPILE for parisc64 Prefix changed in debian, include "gnu" in the commandline. Signed-off-by: Carlos O'Donell Ensure the compiler version is new enough (>= 3.3) Signed-off-by: Randolph Chung Signed-off-by: Kyle McMartin --- arch/parisc/Makefile | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index e3549f480fa5..9b7e42490dd1 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -20,7 +20,8 @@ NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 ifdef CONFIG_64BIT -CROSS_COMPILE := hppa64-linux- +CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \ + echo hppa64-linux-gnu-; else echo hppa64-linux-; fi) UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 else @@ -34,6 +35,14 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align OBJCOPY_FLAGS =-O binary -R .note -R .comment -S +GCC_VERSION := $(call cc-version) +ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),) +$(error Sorry, couldn't find ($(cc-version)).) +endif +ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),) +$(error Sorry, your compiler is too old ($(GCC_VERSION)). GCC v3.3 or above is required.) +endif + cflags-y := -pipe # These flags should be implied by an hppa-linux configuration, but they -- GitLab From 8b631342dd9db9ca272e11814e041e4ee3d1a948 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:52:46 -0400 Subject: [PATCH 0373/1519] [PARISC] Update Kconfig for itimer selection 2.6.14-rc2-pa1: enable 100/250/1000HZ itimer selection Signed-off-by: Grant Grundler Mark floppy as broken. Thanks Joel Signed-off-by: Matthew Wilcox make DISCONTIGMEM depend on 64BIT Signed-off-by: Thibaut VARENE Signed-off-by: Kyle McMartin --- arch/parisc/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 0b07922a2ac6..874a283edb95 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -47,10 +47,10 @@ config PM config ISA_DMA_API bool - default y config ARCH_MAY_HAVE_PC_FDC bool + depends on BROKEN default y source "init/Kconfig" @@ -154,13 +154,14 @@ config HOTPLUG_CPU config ARCH_DISCONTIGMEM_ENABLE bool "Discontiguous memory support (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on 64BIT && EXPERIMENTAL help Say Y to support efficient handling of discontiguous physical memory, for architectures which are either NUMA (Non-Uniform Memory Access) or have huge holes in the physical address space for other reasons. See for more. +source "kernel/Kconfig.hz" source "mm/Kconfig" config PREEMPT -- GitLab From b2450cc1b7ce07d73545ece32db50197d649e230 Mon Sep 17 00:00:00 2001 From: Carlos O'Donell Date: Fri, 21 Oct 2005 22:53:04 -0400 Subject: [PATCH 0374/1519] [PARISC] Implement 5 argument clone. * arch/parisc/kernel/process.c (sys_clone): Use 5 args, and process CLONE_PARENT_SETTID, CLONE_CHILD_SETTID, CLONE_CHILD_CLEARTID. (copy_thread): First cut at CLONE_SETTLS. Signed-off-by: Carlos O'Donell Signed-off-by: Kyle McMartin --- arch/parisc/kernel/process.c | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-) diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 46b759385115..7fdca87ef647 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -9,7 +9,7 @@ * Copyright (C) 2000-2003 Paul Bame * Copyright (C) 2000 Philipp Rumpf * Copyright (C) 2000 David Kennedy - * Copyright (C) 2000 Richard Hirst + * Copyright (C) 2000 Richard Hirst * Copyright (C) 2000 Grant Grundler * Copyright (C) 2001 Alan Modra * Copyright (C) 2001-2002 Ryan Bradetich @@ -245,7 +245,17 @@ int sys_clone(unsigned long clone_flags, unsigned long usp, struct pt_regs *regs) { - int __user *user_tid = (int __user *)regs->gr[26]; + /* Arugments from userspace are: + r26 = Clone flags. + r25 = Child stack. + r24 = parent_tidptr. + r23 = Is the TLS storage descriptor + r22 = child_tidptr + + However, these last 3 args are only examined + if the proper flags are set. */ + int __user *child_tidptr; + int __user *parent_tidptr; /* usp must be word aligned. This also prevents users from * passing in the value 1 (which is the signal for a special @@ -253,10 +263,20 @@ sys_clone(unsigned long clone_flags, unsigned long usp, usp = ALIGN(usp, 4); /* A zero value for usp means use the current stack */ - if(usp == 0) - usp = regs->gr[30]; + if (usp == 0) + usp = regs->gr[30]; - return do_fork(clone_flags, usp, regs, 0, user_tid, NULL); + if (clone_flags & CLONE_PARENT_SETTID) + parent_tidptr = (int __user *)regs->gr[24]; + else + parent_tidptr = NULL; + + if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) + child_tidptr = (int __user *)regs->gr[22]; + else + child_tidptr = NULL; + + return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr); } int @@ -332,6 +352,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, } else { cregs->kpc = (unsigned long) &child_return; } + /* Setup thread TLS area from the 4th parameter in clone */ + if (clone_flags & CLONE_SETTLS) + cregs->cr27 = pregs->gr[23]; + } return 0; -- GitLab From 618febd6784054eea928d712b7e564558a7cefd5 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 21 Oct 2005 22:53:26 -0400 Subject: [PATCH 0375/1519] [PARISC] Fix the alloc_slabmgmt panic Fix the alloc_slabmgmt panic Hopefully this should also fix a lot of other intermittent kernel bugs. The problem has been around since 2.6.9-rc2-pa6 when we allowed floating point registers to be used in kernel code. The essence of the problem is that gcc prefers to use floating point for integer divides and multiples. Further, it can rely on the values in the no clobber fp regs being correct across a function call. Unfortunately, our task switch function only saves the integer no clobber registers, not the fp ones, so if gcc makes a function call to any function in the kernel which could sleep, the values it is relying on in any no clobber floating point register may be lost. In the case of alloc_slabmgmt, the value of the page offset is being stored in %fr12 across a call to kmem_getpages(), which sleeps if no pages are available. Thus, the offset can be trashed and the slab code can end up with a completely bogus address leading to corruption. Kudos to Randolph who came up with the program to trip this problem at will and thus allowed it to be tracked and fixed. Signed-off-by: James Bottomley Signed-off-by: Kyle McMartin --- arch/parisc/kernel/entry.S | 2 ++ include/asm-parisc/assembly.h | 40 +++++++++++++++++++++++++++++------ 2 files changed, 36 insertions(+), 6 deletions(-) diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 0ca49710d95e..166df5bab769 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -863,6 +863,7 @@ __execve: _switch_to: STREG %r2, -RP_OFFSET(%r30) + callee_save_float callee_save load32 _switch_to_ret, %r2 @@ -879,6 +880,7 @@ _switch_to: _switch_to_ret: mtctl %r0, %cr0 /* Needed for single stepping */ callee_rest + callee_rest_float LDREG -RP_OFFSET(%r30), %r2 bv %r0(%r2) diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h index b24a99e3ef9c..fb8bc7c16e0e 100644 --- a/include/asm-parisc/assembly.h +++ b/include/asm-parisc/assembly.h @@ -21,6 +21,7 @@ #ifndef _PARISC_ASSEMBLY_H #define _PARISC_ASSEMBLY_H +#define CALLEE_FLOAT_FRAME_SIZE 80 #ifdef __LP64__ #define LDREG ldd #define STREG std @@ -30,7 +31,7 @@ #define SHRREG shrd #define RP_OFFSET 16 #define FRAME_SIZE 128 -#define CALLEE_SAVE_FRAME_SIZE 144 +#define CALLEE_REG_FRAME_SIZE 144 #else #define LDREG ldw #define STREG stw @@ -40,8 +41,9 @@ #define SHRREG shr #define RP_OFFSET 20 #define FRAME_SIZE 64 -#define CALLEE_SAVE_FRAME_SIZE 128 +#define CALLEE_REG_FRAME_SIZE 128 #endif +#define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE) #ifdef CONFIG_PA20 #define BL b,l @@ -300,9 +302,35 @@ fldd,mb -8(\regs), %fr0 .endm + .macro callee_save_float + fstd,ma %fr12, 8(%r30) + fstd,ma %fr13, 8(%r30) + fstd,ma %fr14, 8(%r30) + fstd,ma %fr15, 8(%r30) + fstd,ma %fr16, 8(%r30) + fstd,ma %fr17, 8(%r30) + fstd,ma %fr18, 8(%r30) + fstd,ma %fr19, 8(%r30) + fstd,ma %fr20, 8(%r30) + fstd,ma %fr21, 8(%r30) + .endm + + .macro callee_rest_float + fldd,mb -8(%r30), %fr21 + fldd,mb -8(%r30), %fr20 + fldd,mb -8(%r30), %fr19 + fldd,mb -8(%r30), %fr18 + fldd,mb -8(%r30), %fr17 + fldd,mb -8(%r30), %fr16 + fldd,mb -8(%r30), %fr15 + fldd,mb -8(%r30), %fr14 + fldd,mb -8(%r30), %fr13 + fldd,mb -8(%r30), %fr12 + .endm + #ifdef __LP64__ .macro callee_save - std,ma %r3, CALLEE_SAVE_FRAME_SIZE(%r30) + std,ma %r3, CALLEE_REG_FRAME_SIZE(%r30) mfctl %cr27, %r3 std %r4, -136(%r30) std %r5, -128(%r30) @@ -340,13 +368,13 @@ ldd -128(%r30), %r5 ldd -136(%r30), %r4 mtctl %r3, %cr27 - ldd,mb -CALLEE_SAVE_FRAME_SIZE(%r30), %r3 + ldd,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3 .endm #else /* ! __LP64__ */ .macro callee_save - stw,ma %r3, CALLEE_SAVE_FRAME_SIZE(%r30) + stw,ma %r3, CALLEE_REG_FRAME_SIZE(%r30) mfctl %cr27, %r3 stw %r4, -124(%r30) stw %r5, -120(%r30) @@ -384,7 +412,7 @@ ldw -120(%r30), %r5 ldw -124(%r30), %r4 mtctl %r3, %cr27 - ldw,mb -CALLEE_SAVE_FRAME_SIZE(%r30), %r3 + ldw,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3 .endm #endif /* ! __LP64__ */ -- GitLab From 05aa10de701409b893484d2901c8974b3382f8fe Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:53:43 -0400 Subject: [PATCH 0376/1519] [PARISC] Add ECANCELED to errno.h add ECANCELED - SuSv3 wants one L. IB/SDP actually returns this error. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- include/asm-parisc/errno.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-parisc/errno.h b/include/asm-parisc/errno.h index 08464c405471..e2f3ddc796be 100644 --- a/include/asm-parisc/errno.h +++ b/include/asm-parisc/errno.h @@ -114,6 +114,7 @@ #define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */ #define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */ +#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */ /* for robust mutexes */ #define EOWNERDEAD 254 /* Owner died */ -- GitLab From b4b45313e58bf25886072a4ab111fac553747802 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 21 Oct 2005 22:54:00 -0400 Subject: [PATCH 0377/1519] [PARISC] Add other CRT_ID for newer cards to grfioctl.h Add IDs for some other STI graphics cards found on HP PA-RISC machines. Signed-off-by: Kyle McMartin --- include/asm-parisc/grfioctl.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-parisc/grfioctl.h b/include/asm-parisc/grfioctl.h index d3cfc0168fb1..6a910311b56b 100644 --- a/include/asm-parisc/grfioctl.h +++ b/include/asm-parisc/grfioctl.h @@ -69,6 +69,8 @@ #define CRT_ID_TVRX S9000_ID_98765 /* TVRX (gto/falcon) */ #define CRT_ID_ARTIST S9000_ID_ARTIST /* Artist */ #define CRT_ID_SUMMIT 0x2FC1066B /* Summit FX2, FX4, FX6 ... */ +#define CRT_ID_LEGO 0x35ACDA30 /* Lego FX5, FX10 ... */ +#define CRT_ID_PINNACLE 0x35ACDA16 /* Pinnacle FXe */ /* structure for ioctl(GCDESCRIBE) */ -- GitLab From 63af965d2bc8d8c5d4c5949b8d3dbdc3c7b7d97a Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:54:20 -0400 Subject: [PATCH 0378/1519] [PARISC] Define pgprot_noncached macro in pgtable.h drivers/infiniband depends on definition of pgprot_noncached() macro. Someone else will have to fix it's wrong. Signed-off-by: Grant Grundler --- include/asm-parisc/pgtable.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h index 820c6e712cd7..c28fb6f48c6c 100644 --- a/include/asm-parisc/pgtable.h +++ b/include/asm-parisc/pgtable.h @@ -501,6 +501,8 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ remap_pfn_range(vma, vaddr, pfn, size, prot) +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE) + #define MK_IOSPACE_PFN(space, pfn) (pfn) #define GET_IOSPACE(pfn) 0 #define GET_PFN(pfn) (pfn) -- GitLab From dd0fd51dc1585941c2edccdb40e5f11ea3a64496 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 21 Oct 2005 22:54:38 -0400 Subject: [PATCH 0379/1519] [PARISC] Remove the spurious do_softirq calls from entry.S remove the spurious do_softirq calls from entry.S With these in we were calling do_softirq twice; plus the calls in entry.S took no account of nesting. Signed-off-by: James Bottomley Signed-off-by: Kyle McMartin --- arch/parisc/kernel/entry.S | 27 --------------------------- 1 file changed, 27 deletions(-) diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 166df5bab769..c7e66ee5b083 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -970,9 +970,6 @@ intr_return: add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ #endif /* CONFIG_SMP */ - LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ - cmpib,<>,n 0,%r20,intr_do_softirq /* forward */ - intr_check_resched: /* check for reschedule */ @@ -1017,17 +1014,6 @@ intr_restore: nop nop - .import do_softirq,code -intr_do_softirq: - BL do_softirq,%r2 -#ifdef CONFIG_64BIT - ldo -16(%r30),%r29 /* Reference param save area */ -#else - nop -#endif - b intr_check_resched - nop - .import schedule,code intr_do_resched: /* Only do reschedule if we are returning to user space */ @@ -2096,9 +2082,6 @@ syscall_check_bh: add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */ #endif /* CONFIG_SMP */ - LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */ - cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */ - syscall_check_resched: /* check for reschedule */ @@ -2236,16 +2219,6 @@ pt_regs_ok: b intr_restore nop - .import do_softirq,code -syscall_do_softirq: - BL do_softirq,%r2 - nop - /* NOTE: We enable I-bit incase we schedule later, - * and we might be going back to userspace if we were - * traced. */ - b syscall_check_resched - ssm PSW_SM_I, %r0 /* do_softirq returns with I bit off */ - .import schedule,code syscall_do_resched: BL schedule,%r2 -- GitLab From c2709020adb442f7d25f0805af08a3b6cfedd7be Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Fri, 21 Oct 2005 22:55:15 -0400 Subject: [PATCH 0380/1519] [PARISC] Add NETPOLL support to lasi_82596 add netpoll support Patch by Sven Schnelle Signed-off-by: Sven Schnelle Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin --- drivers/net/lasi_82596.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c index a63d8a317d9e..f7b7238d8352 100644 --- a/drivers/net/lasi_82596.c +++ b/drivers/net/lasi_82596.c @@ -415,6 +415,10 @@ static int rx_ring_size = RX_RING_SIZE; static int ticks_limit = 100; static int max_cmd_backlog = TX_RING_SIZE-1; +#ifdef CONFIG_NET_POLL_CONTROLLER +static void i596_poll_controller(struct net_device *dev); +#endif + static inline void CA(struct net_device *dev) { @@ -636,11 +640,11 @@ static int init_i596_mem(struct net_device *dev) disable_irq(dev->irq); /* disable IRQs from LAN */ DEB(DEB_INIT, - printk("RESET 82596 port: %p (with IRQ %d disabled)\n", - (void*)(dev->base_addr + PA_I82596_RESET), + printk("RESET 82596 port: %lx (with IRQ %d disabled)\n", + (dev->base_addr + PA_I82596_RESET), dev->irq)); - gsc_writel(0, (void*)(dev->base_addr + PA_I82596_RESET)); /* Hard Reset */ + gsc_writel(0, (dev->base_addr + PA_I82596_RESET)); /* Hard Reset */ udelay(100); /* Wait 100us - seems to help */ /* change the scp address */ @@ -1209,6 +1213,9 @@ static int __devinit i82596_probe(struct net_device *dev, dev->set_multicast_list = set_multicast_list; dev->tx_timeout = i596_tx_timeout; dev->watchdog_timeo = TX_TIMEOUT; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = i596_poll_controller; +#endif dev->priv = (void *)(dev->mem_start); @@ -1242,6 +1249,14 @@ static int __devinit i82596_probe(struct net_device *dev, return 0; } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void i596_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + i596_interrupt(dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs) { -- GitLab From 37318a3cb1028933417533084ddbf9d84be06878 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:55:34 -0400 Subject: [PATCH 0381/1519] [PARISC] Fix copy_user_page_asm to NOT access past end of page 2.6.12-rc2-pa3 fix copy_user_page_asm to NOT access past end of page. My bad. /o\ Lamont confirmed that instructions following a conditional branch are *alway* executed regardless if the branch is taken or not. Unless they are nullified (which was missing in this case). He also noted: Conditional branches nullify on forward taken branch, and on non-taken backward branch. Note that .+4 is a backwards branch. This makes alot more sense than the giberish in the PA20 arch book. Compiles and boots on both 64-bit (a500) and 32-bit (j6k). Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/pacache.S | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 4a7d9c8903f4..e217ae369fbb 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -351,7 +351,11 @@ copy_user_page_asm: std %r22, 120(%r26) ldo 128(%r26), %r26 - ADDIB> -1, %r1, 1b /* bundle 10 */ + /* conditional branches nullify on forward taken branch, and on + * non-taken backward branch. Note that .+4 is a backwards branch. + * The ldd should only get executed if the branch is taken. + */ + ADDIB>,n -1, %r1, 1b /* bundle 10 */ ldd 0(%r25), %r19 /* start next loads */ #else @@ -363,10 +367,10 @@ copy_user_page_asm: * the full 64 bit register values on interrupt, we can't * use ldd/std on a 32 bit kernel. */ + ldw 0(%r25), %r19 ldi 64, %r1 /* PAGE_SIZE/64 == 64 */ 1: - ldw 0(%r25), %r19 ldw 4(%r25), %r20 ldw 8(%r25), %r21 ldw 12(%r25), %r22 @@ -396,11 +400,12 @@ copy_user_page_asm: ldw 60(%r25), %r22 stw %r19, 48(%r26) stw %r20, 52(%r26) + ldo 64(%r25), %r25 stw %r21, 56(%r26) stw %r22, 60(%r26) ldo 64(%r26), %r26 - ADDIB> -1, %r1, 1b - ldo 64(%r25), %r25 + ADDIB>,n -1, %r1, 1b + ldw 0(%r25), %r19 #endif bv %r0(%r2) nop -- GitLab From 9b3b331d0322b60de1bde20528bf974f62804ffa Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:55:51 -0400 Subject: [PATCH 0382/1519] [PARISC] Properly specify index field to I/D cache flush ops replace use of "0" with "%r0" since PA 1.1 I/D flush ops only take a general register and not an immediate value for the index field. This just forces the code to always be PA 1.1 "clean". From: Joel Soete Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/pacache.S | 4 ++-- arch/parisc/kernel/signal.c | 11 +++++++---- 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index e217ae369fbb..08cde5addfca 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -227,7 +227,7 @@ flush_instruction_cache_local: fimanyloop: /* Loop if LOOP >= 2 */ ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */ - fice 0(%sr1, %arg0) + fice %r0(%sr1, %arg0) fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */ movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */ ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */ @@ -269,7 +269,7 @@ flush_data_cache_local: fdmanyloop: /* Loop if LOOP >= 2 */ ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */ - fdce 0(%sr1, %arg0) + fdce %r0(%sr1, %arg0) fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */ movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */ ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */ diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index befdfe700616..82c24e62ab63 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -625,11 +625,14 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall) put_user(0xe0008200, &usp[3]); put_user(0x34140000, &usp[4]); - /* Stack is 64-byte aligned, and we only - * need to flush 1 cache line */ - asm("fdc 0(%%sr3, %0)\n" + /* Stack is 64-byte aligned, and we only need + * to flush 1 cache line. + * Flushing one cacheline is cheap. + * "sync" on bigger (> 4 way) boxes is not. + */ + asm("fdc %%r0(%%sr3, %0)\n" "sync\n" - "fic 0(%%sr3, %0)\n" + "fic %%r0(%%sr3, %0)\n" "sync\n" : : "r"(regs->gr[30])); -- GitLab From e635c96ed6c972e1b3cb0c0fc3681c1204697287 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:56:14 -0400 Subject: [PATCH 0383/1519] [PARISC] Explicitly specify sr4 when flushing kernel space Specify sr4 when flushing kernel space (we could equally well use sr5-7, but must not use sr0). Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- arch/parisc/kernel/pacache.S | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 08cde5addfca..9534ee17b9be 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -949,23 +949,23 @@ flush_kernel_icache_page: sub %r25, %r23, %r25 -1: fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) - fic,m %r23(%r26) +1: fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) + fic,m %r23(%sr4, %r26) CMPB<< %r26, %r25, 1b - fic,m %r23(%r26) + fic,m %r23(%sr4, %r26) sync bv %r0(%r2) @@ -987,7 +987,7 @@ flush_kernel_icache_range_asm: ANDCM %r26, %r21, %r26 1: CMPB<<,n %r26, %r25, 1b - fic,m %r23(%r26) + fic,m %r23(%sr4, %r26) sync bv %r0(%r2) -- GitLab From 61520e1f8f5ec3a78510a3254947324711944b98 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:56:35 -0400 Subject: [PATCH 0384/1519] [PARISC] Specify level to fix binutils level promotion bug fixup.S needs to specify .level and use correct LDREG macro. New binutils has a bug where it doesn't "promote" from PA1.0 to PA1.1 correctly when using ",s" completer. remove use of __LP64__ in assembly.h and add some white space. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/lib/fixup.S | 4 +++- include/asm-parisc/assembly.h | 6 ++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S index 1b91612ed964..e0661c2978ed 100644 --- a/arch/parisc/lib/fixup.S +++ b/arch/parisc/lib/fixup.S @@ -35,7 +35,7 @@ extrd,u \t2,63,32,\t2 #endif /* t2 = &__per_cpu_offset[smp_processor_id()]; */ - LDREG,s \t2(\t1),\t2 + LDREGX \t2(\t1),\t2 addil LT%per_cpu__exception_data,%r27 LDREG RT%per_cpu__exception_data(%r1),\t1 /* t1 = &__get_cpu_var(exception_data) */ @@ -53,6 +53,8 @@ .endm #endif + .level LEVEL + .text .section .fixup, "ax" diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h index fb8bc7c16e0e..3ce3440d1b0c 100644 --- a/include/asm-parisc/assembly.h +++ b/include/asm-parisc/assembly.h @@ -22,7 +22,8 @@ #define _PARISC_ASSEMBLY_H #define CALLEE_FLOAT_FRAME_SIZE 80 -#ifdef __LP64__ + +#ifdef CONFIG_64BIT #define LDREG ldd #define STREG std #define LDREGX ldd,s @@ -32,7 +33,7 @@ #define RP_OFFSET 16 #define FRAME_SIZE 128 #define CALLEE_REG_FRAME_SIZE 144 -#else +#else /* CONFIG_64BIT */ #define LDREG ldw #define STREG stw #define LDREGX ldwx,s @@ -43,6 +44,7 @@ #define FRAME_SIZE 64 #define CALLEE_REG_FRAME_SIZE 128 #endif + #define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE) #ifdef CONFIG_PA20 -- GitLab From e55fb3e787ccfbbdb3198ec859d5689e5413c7bd Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Fri, 21 Oct 2005 22:56:53 -0400 Subject: [PATCH 0385/1519] [PARISC] Properly specify section alignment for real2.S .align applies to the current section - ie section directives come first. Thanks to Joel Soete for catching this. Signed-off-by: Grant Grundler Signed-off-by: Kyle McMartin --- arch/parisc/kernel/real2.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 085bff7c569d..8c2859cca77e 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -145,8 +145,8 @@ restore_control_regs: /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for * more general-purpose use by the several places which need RFIs */ - .align 128 .text + .align 128 rfi_virt2real: /* switch to real mode... */ rsm PSW_SM_I,%r0 -- GitLab From abff75439fd6e9b5774e5984d4c3b3b59cb3038b Mon Sep 17 00:00:00 2001 From: Randolph Chung Date: Fri, 21 Oct 2005 22:57:13 -0400 Subject: [PATCH 0386/1519] [PARISC] Avoid use of floating point in the kernel don't use *printf %f in the kernel, mm'kay? Signed-off-by: Randolph Chung Signed-off-by: Kyle McMartin --- drivers/parisc/pdc_stable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 67c8f3b44848..273a74179720 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -536,7 +536,7 @@ pdcs_info_read(struct subsystem *entry, char *buf) out += sprintf(out, "Memory tested: "); if ((result & 0x0F) < 0x0E) - out += sprintf(out, "%.3f MB", 0.256*(1<<(result & 0x0F))); + out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256); else out += sprintf(out, "All"); out += sprintf(out, "\n"); -- GitLab From 27ee073cd2f72aa794299ef1ead31072f5176533 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:57:43 -0400 Subject: [PATCH 0387/1519] [PARISC] Update scsi drivers from parisc tree Fix lasi700 for James's ioread*be() changes Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/scsi/lasi700.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c index 8028418b3ad6..459a4daebece 100644 --- a/drivers/scsi/lasi700.c +++ b/drivers/scsi/lasi700.c @@ -125,8 +125,6 @@ lasi700_probe(struct parisc_device *dev) hostdata->dmode_extra = DMODE_FC2; } - NCR_700_set_mem_mapped(hostdata); - host = NCR_700_detect(&lasi700_template, hostdata, &dev->dev); if (!host) goto out_kfree; -- GitLab From ae8c75c1c47029a64976690c37336a2be6b49778 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:58:03 -0400 Subject: [PATCH 0388/1519] [PARISC] Fix mux.c driver Missing spin_lock_init() made the Mux driver hang on SMP systems. Fix up users of ->hpa to use ->hpa.start instead Remove warning in 8250_gsc.c by eliminating serial_line_nr Signed-off-by: Matthew Wilcox Signed-off-by: Kyle McMartin --- drivers/serial/8250_gsc.c | 1 - drivers/serial/mux.c | 7 +++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index abc5a0cfe243..8b4947933d9b 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -29,7 +29,6 @@ static int __init serial_init_chip(struct parisc_device *dev) { - static int serial_line_nr; struct uart_port port; unsigned long address; int err; diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 009ce83c8ef5..660bae5ba179 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -27,6 +27,7 @@ #include /* for udelay */ #include #include +#include #include #ifdef CONFIG_MAGIC_SYSRQ @@ -469,16 +470,18 @@ static int __init mux_probe(struct parisc_device *dev) for(i = 0; i < ports; ++i, ++port_cnt) { port = &mux_ports[port_cnt]; port->iobase = 0; - port->mapbase = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET); + port->mapbase = dev->hpa.start + MUX_OFFSET + + (i * MUX_LINE_OFFSET); port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET); port->iotype = SERIAL_IO_MEM; port->type = PORT_MUX; - port->irq = SERIAL_IRQ_NONE; + port->irq = NO_IRQ; port->uartclk = 0; port->fifosize = MUX_FIFO_SIZE; port->ops = &mux_pops; port->flags = UPF_BOOT_AUTOCONF; port->line = port_cnt; + spin_lock_init(&port->lock); status = uart_add_one_port(&mux_driver, port); BUG_ON(status); } -- GitLab From 6ab0f5cd364476fe5cb329fd46ee41bea6d4c69c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 21 Oct 2005 22:58:51 -0400 Subject: [PATCH 0389/1519] [PARISC] Update parisc specific input code from parisc tree Update drivers to new input layer changes. Signed-off-by: Helge Deller Signed-off-by: Matthew Wilcox Reorder code in gscps2_interrupt() and only enable ports when opened. This fixes issues with hangs booting an SMP kernel on my C360. Previously serio_interrupt() could be called before the lock in struct serio was initialised. Signed-off-by: Richard Hirst Signed-off-by: Kyle McMartin --- drivers/input/keyboard/hil_kbd.c | 28 +- drivers/input/keyboard/hilkbd.c | 2 +- drivers/input/mouse/hil_ptr.c | 33 ++- drivers/input/serio/gscps2.c | 13 +- drivers/input/serio/hil_mlc.c | 14 +- include/linux/hil.h | 483 +++++++++++++++++++++++++++++++ include/linux/hil_mlc.h | 168 +++++++++++ include/linux/hp_sdc.h | 300 +++++++++++++++++++ include/linux/input.h | 1 + 9 files changed, 1011 insertions(+), 31 deletions(-) create mode 100644 include/linux/hil.h create mode 100644 include/linux/hil_mlc.h create mode 100644 include/linux/hp_sdc.h diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index ef78bffed5e7..0a90962c38e7 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -204,7 +204,7 @@ static irqreturn_t hil_kbd_interrupt(struct serio *serio, hil_packet packet; int idx; - kbd = (struct hil_kbd *)serio->private; + kbd = serio_get_drvdata(serio); if (kbd == NULL) { BUG(); return IRQ_HANDLED; @@ -234,7 +234,7 @@ static void hil_kbd_disconnect(struct serio *serio) { struct hil_kbd *kbd; - kbd = (struct hil_kbd *)serio->private; + kbd = serio_get_drvdata(serio); if (kbd == NULL) { BUG(); return; @@ -245,20 +245,20 @@ static void hil_kbd_disconnect(struct serio *serio) kfree(kbd); } -static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv) +static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv) { struct hil_kbd *kbd; uint8_t did, *idd; int i; - if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return; - - if (!(kbd = kmalloc(sizeof(struct hil_kbd), GFP_KERNEL))) return; + kbd = kmalloc(sizeof(*kbd), GFP_KERNEL); + if (!kbd) + return -ENOMEM; memset(kbd, 0, sizeof(struct hil_kbd)); if (serio_open(serio, drv)) goto bail0; - serio->private = kbd; + serio_set_drvdata(serio, kbd); kbd->serio = serio; kbd->dev.private = kbd; @@ -342,19 +342,31 @@ static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv) down(&(kbd->sem)); up(&(kbd->sem)); - return; + return 0; bail1: serio_close(serio); bail0: kfree(kbd); + serio_set_drvdata(serio, NULL); + return -EIO; } +static struct serio_device_id hil_kbd_ids[] = { + { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; struct serio_driver hil_kbd_serio_drv = { .driver = { .name = "hil_kbd", }, .description = "HP HIL keyboard driver", + .id_table = hil_kbd_ids, .connect = hil_kbd_connect, .disconnect = hil_kbd_disconnect, .interrupt = hil_kbd_interrupt diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index e7a1e14f8b0c..e95bc052e32a 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c index bc22849c6c79..c2bf2ed07dc6 100644 --- a/drivers/input/mouse/hil_ptr.c +++ b/drivers/input/mouse/hil_ptr.c @@ -196,7 +196,7 @@ static irqreturn_t hil_ptr_interrupt(struct serio *serio, hil_packet packet; int idx; - ptr = (struct hil_ptr *)serio->private; + ptr = serio_get_drvdata(serio); if (ptr == NULL) { BUG(); return IRQ_HANDLED; @@ -227,7 +227,7 @@ static void hil_ptr_disconnect(struct serio *serio) { struct hil_ptr *ptr; - ptr = (struct hil_ptr *)serio->private; + ptr = serio_get_drvdata(serio); if (ptr == NULL) { BUG(); return; @@ -238,21 +238,19 @@ static void hil_ptr_disconnect(struct serio *serio) kfree(ptr); } -static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver) +static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver) { struct hil_ptr *ptr; char *txt; unsigned int i, naxsets, btntype; uint8_t did, *idd; - if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return; - - if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return; + if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return -ENOMEM; memset(ptr, 0, sizeof(struct hil_ptr)); if (serio_open(serio, driver)) goto bail0; - serio->private = ptr; + serio_set_drvdata(serio, ptr); ptr->serio = serio; ptr->dev.private = ptr; @@ -380,23 +378,34 @@ static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver) (btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad", did); - return; + return 0; bail1: serio_close(serio); bail0: kfree(ptr); - return; + serio_set_drvdata(serio, NULL); + return -ENODEV; } +static struct serio_device_id hil_ptr_ids[] = { + { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; static struct serio_driver hil_ptr_serio_driver = { .driver = { .name = "hil_ptr", }, .description = "HP HIL mouse/tablet driver", - .connect = hil_ptr_connect, - .disconnect = hil_ptr_disconnect, - .interrupt = hil_ptr_interrupt + .id_table = hil_ptr_ids, + .connect = hil_ptr_connect, + .disconnect = hil_ptr_disconnect, + .interrupt = hil_ptr_interrupt }; static int __init hil_ptr_init(void) diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 9790d7169a53..a7b0de0f92b2 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -211,9 +211,6 @@ static void gscps2_reset(struct gscps2port *ps2port) writeb(0xff, addr+GSC_RESET); gscps2_flush(ps2port); spin_unlock_irqrestore(&ps2port->lock, flags); - - /* enable it */ - gscps2_enable(ps2port, ENABLE); } static LIST_HEAD(ps2port_list); @@ -307,6 +304,9 @@ static int gscps2_open(struct serio *port) gscps2_reset(ps2port); + /* enable it */ + gscps2_enable(ps2port, ENABLE); + gscps2_interrupt(0, NULL, NULL); return 0; @@ -370,8 +370,6 @@ static int __init gscps2_probe(struct parisc_device *dev) serio->port_data = ps2port; serio->dev.parent = &dev->dev; - list_add_tail(&ps2port->node, &ps2port_list); - ret = -EBUSY; if (request_irq(dev->irq, gscps2_interrupt, SA_SHIRQ, ps2port->port->name, ps2port)) goto fail_miserably; @@ -396,15 +394,16 @@ static int __init gscps2_probe(struct parisc_device *dev) serio_register_port(ps2port->port); + list_add_tail(&ps2port->node, &ps2port_list); + return 0; fail: free_irq(dev->irq, ps2port); fail_miserably: - list_del(&ps2port->node); iounmap(ps2port->addr); - release_mem_region(dev->hpa, GSC_STATUS + 4); + release_mem_region(dev->hpa.start, GSC_STATUS + 4); fail_nomem: kfree(ps2port); diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c index c243cb6fdfc4..5704204964a3 100644 --- a/drivers/input/serio/hil_mlc.c +++ b/drivers/input/serio/hil_mlc.c @@ -801,7 +801,8 @@ static int hil_mlc_serio_open(struct serio *serio) { struct hil_mlc_serio_map *map; struct hil_mlc *mlc; - if (serio->private != NULL) return -EBUSY; + if (serio_get_drvdata(serio) != NULL) + return -EBUSY; map = serio->port_data; if (map == NULL) { @@ -832,11 +833,18 @@ static void hil_mlc_serio_close(struct serio *serio) { return; } - serio->private = NULL; + serio_set_drvdata(serio, NULL); serio->drv = NULL; /* TODO wake up interruptable */ } +static struct serio_device_id hil_mlc_serio_id = { + .type = SERIO_HIL_MLC, + .proto = SERIO_HIL, + .extra = SERIO_ANY, + .id = SERIO_ANY, +}; + int hil_mlc_register(hil_mlc *mlc) { int i; unsigned long flags; @@ -867,7 +875,7 @@ int hil_mlc_register(hil_mlc *mlc) { mlc_serio = kmalloc(sizeof(*mlc_serio), GFP_KERNEL); mlc->serio[i] = mlc_serio; memset(mlc_serio, 0, sizeof(*mlc_serio)); - mlc_serio->type = SERIO_HIL | SERIO_HIL_MLC; + mlc_serio->id = hil_mlc_serio_id; mlc_serio->write = hil_mlc_serio_write; mlc_serio->open = hil_mlc_serio_open; mlc_serio->close = hil_mlc_serio_close; diff --git a/include/linux/hil.h b/include/linux/hil.h new file mode 100644 index 000000000000..13352d7d0caf --- /dev/null +++ b/include/linux/hil.h @@ -0,0 +1,483 @@ +#ifndef _HIL_H_ +#define _HIL_H_ + +/* + * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header. + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + * A note of thanks to HP for providing and shipping reference materials + * free of charge to help in the development of HIL support for Linux. + * + */ + +#include + +/* Physical constants relevant to raw loop/device timing. + */ + +#define HIL_CLOCK 8MHZ +#define HIL_EK1_CLOCK 30HZ +#define HIL_EK2_CLOCK 60HZ + +#define HIL_TIMEOUT_DEV 5 /* ms */ +#define HIL_TIMEOUT_DEVS 10 /* ms */ +#define HIL_TIMEOUT_NORESP 10 /* ms */ +#define HIL_TIMEOUT_DEVS_DATA 16 /* ms */ +#define HIL_TIMEOUT_SELFTEST 200 /* ms */ + + +/* Actual wire line coding. These will only be useful if someone is + * implementing a software MLC to run HIL devices on a non-parisc machine. + */ + +#define HIL_WIRE_PACKET_LEN 15 +enum hil_wire_bitpos { + HIL_WIRE_START = 0, + HIL_WIRE_ADDR2, + HIL_WIRE_ADDR1, + HIL_WIRE_ADDR0, + HIL_WIRE_COMMAND, + HIL_WIRE_DATA7, + HIL_WIRE_DATA6, + HIL_WIRE_DATA5, + HIL_WIRE_DATA4, + HIL_WIRE_DATA3, + HIL_WIRE_DATA2, + HIL_WIRE_DATA1, + HIL_WIRE_DATA0, + HIL_WIRE_PARITY, + HIL_WIRE_STOP +}; + +/* HP documentation uses these bit positions to refer to commands; + * we will call these "packets". + */ +enum hil_pkt_bitpos { + HIL_PKT_CMD = 0x00000800, + HIL_PKT_ADDR2 = 0x00000400, + HIL_PKT_ADDR1 = 0x00000200, + HIL_PKT_ADDR0 = 0x00000100, + HIL_PKT_ADDR_MASK = 0x00000700, + HIL_PKT_ADDR_SHIFT = 8, + HIL_PKT_DATA7 = 0x00000080, + HIL_PKT_DATA6 = 0x00000040, + HIL_PKT_DATA5 = 0x00000020, + HIL_PKT_DATA4 = 0x00000010, + HIL_PKT_DATA3 = 0x00000008, + HIL_PKT_DATA2 = 0x00000004, + HIL_PKT_DATA1 = 0x00000002, + HIL_PKT_DATA0 = 0x00000001, + HIL_PKT_DATA_MASK = 0x000000FF, + HIL_PKT_DATA_SHIFT = 0 +}; + +/* The HIL MLC also has several error/status/control bits. We extend the + * "packet" to include these when direct access to the MLC is available, + * or emulate them in cases where they are not available. + * + * This way the device driver knows that the underlying MLC driver + * has had to deal with loop errors. + */ +enum hil_error_bitpos { + HIL_ERR_OB = 0x00000800, /* MLC is busy sending an auto-poll, + or we have filled up the output + buffer and must wait. */ + HIL_ERR_INT = 0x00010000, /* A normal interrupt has occurred. */ + HIL_ERR_NMI = 0x00020000, /* An NMI has occurred. */ + HIL_ERR_LERR = 0x00040000, /* A poll didn't come back. */ + HIL_ERR_PERR = 0x01000000, /* There was a Parity Error. */ + HIL_ERR_FERR = 0x02000000, /* There was a Framing Error. */ + HIL_ERR_FOF = 0x04000000 /* Input FIFO Overflowed. */ +}; + +enum hil_control_bitpos { + HIL_CTRL_TEST = 0x00010000, + HIL_CTRL_IPF = 0x00040000, + HIL_CTRL_APE = 0x02000000 +}; + +/* Bits 30,31 are unused, we use them to control write behavior. */ +#define HIL_DO_ALTER_CTRL 0x40000000 /* Write MSW of packet to control + before writing LSW to loop */ +#define HIL_CTRL_ONLY 0xc0000000 /* *Only* alter the control registers */ + +/* This gives us a 32-bit "packet" + */ +typedef u32 hil_packet; + + +/* HIL Loop commands + */ +enum hil_command { + HIL_CMD_IFC = 0x00, /* Interface Clear */ + HIL_CMD_EPT = 0x01, /* Enter Pass-Thru Mode */ + HIL_CMD_ELB = 0x02, /* Enter Loop-Back Mode */ + HIL_CMD_IDD = 0x03, /* Identify and Describe */ + HIL_CMD_DSR = 0x04, /* Device Soft Reset */ + HIL_CMD_PST = 0x05, /* Perform Self Test */ + HIL_CMD_RRG = 0x06, /* Read Register */ + HIL_CMD_WRG = 0x07, /* Write Register */ + HIL_CMD_ACF = 0x08, /* Auto Configure */ + HIL_CMDID_ACF = 0x07, /* Auto Configure bits with incremented ID */ + HIL_CMD_POL = 0x10, /* Poll */ + HIL_CMDCT_POL = 0x0f, /* Poll command bits with item count */ + HIL_CMD_RPL = 0x20, /* RePoll */ + HIL_CMDCT_RPL = 0x0f, /* RePoll command bits with item count */ + HIL_CMD_RNM = 0x30, /* Report Name */ + HIL_CMD_RST = 0x31, /* Report Status */ + HIL_CMD_EXD = 0x32, /* Extended Describe */ + HIL_CMD_RSC = 0x33, /* Report Security Code */ + + /* 0x34 to 0x3c reserved for future use */ + + HIL_CMD_DKA = 0x3d, /* Disable Keyswitch Autorepeat */ + HIL_CMD_EK1 = 0x3e, /* Enable Keyswitch Autorepeat 1 */ + HIL_CMD_EK2 = 0x3f, /* Enable Keyswitch Autorepeat 2 */ + HIL_CMD_PR1 = 0x40, /* Prompt1 */ + HIL_CMD_PR2 = 0x41, /* Prompt2 */ + HIL_CMD_PR3 = 0x42, /* Prompt3 */ + HIL_CMD_PR4 = 0x43, /* Prompt4 */ + HIL_CMD_PR5 = 0x44, /* Prompt5 */ + HIL_CMD_PR6 = 0x45, /* Prompt6 */ + HIL_CMD_PR7 = 0x46, /* Prompt7 */ + HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */ + HIL_CMD_AK1 = 0x48, /* Acknowlege1 */ + HIL_CMD_AK2 = 0x49, /* Acknowlege2 */ + HIL_CMD_AK3 = 0x4a, /* Acknowlege3 */ + HIL_CMD_AK4 = 0x4b, /* Acknowlege4 */ + HIL_CMD_AK5 = 0x4c, /* Acknowlege5 */ + HIL_CMD_AK6 = 0x4d, /* Acknowlege6 */ + HIL_CMD_AK7 = 0x4e, /* Acknowlege7 */ + HIL_CMD_ACK = 0x4f, /* Acknowlege (General Purpose) */ + + /* 0x50 to 0x78 reserved for future use */ + /* 0x80 to 0xEF device-specific commands */ + /* 0xf0 to 0xf9 reserved for future use */ + + HIL_CMD_RIO = 0xfa, /* Register I/O Error */ + HIL_CMD_SHR = 0xfb, /* System Hard Reset */ + HIL_CMD_TER = 0xfc, /* Transmission Error */ + HIL_CMD_CAE = 0xfd, /* Configuration Address Error */ + HIL_CMD_DHR = 0xfe, /* Device Hard Reset */ + + /* 0xff is prohibited from use. */ +}; + + +/* + * Response "records" to HIL commands + */ + +/* Device ID byte + */ +#define HIL_IDD_DID_TYPE_MASK 0xe0 /* Primary type bits */ +#define HIL_IDD_DID_TYPE_KB_INTEGRAL 0xa0 /* Integral keyboard */ +#define HIL_IDD_DID_TYPE_KB_ITF 0xc0 /* ITD keyboard */ +#define HIL_IDD_DID_TYPE_KB_RSVD 0xe0 /* Reserved keyboard type */ +#define HIL_IDD_DID_TYPE_KB_LANG_MASK 0x1f /* Keyboard locale bits */ +#define HIL_IDD_DID_KBLANG_USE_ESD 0x00 /* Use ESD Locale instead */ +#define HIL_IDD_DID_TYPE_ABS 0x80 /* Absolute Positioners */ +#define HIL_IDD_DID_ABS_RSVD1_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD1 0x98 +#define HIL_IDD_DID_ABS_TABLET_MASK 0xf8 /* Tablets and digitizers */ +#define HIL_IDD_DID_ABS_TABLET 0x90 +#define HIL_IDD_DID_ABS_TSCREEN_MASK 0xfc /* Touch screens */ +#define HIL_IDD_DID_ABS_TSCREEN 0x8c +#define HIL_IDD_DID_ABS_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD2 0x88 +#define HIL_IDD_DID_ABS_RSVD3_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_ABS_RSVD3 0x80 +#define HIL_IDD_DID_TYPE_REL 0x60 /* Relative Positioners */ +#define HIL_IDD_DID_REL_RSVD1_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_REL_RSVD1 0x70 +#define HIL_IDD_DID_REL_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_REL_RSVD2 0x6c +#define HIL_IDD_DID_REL_MOUSE_MASK 0xfc /* Mouse */ +#define HIL_IDD_DID_REL_MOUSE 0x68 +#define HIL_IDD_DID_REL_QUAD_MASK 0xf8 /* Other Quadrature Devices */ +#define HIL_IDD_DID_REL_QUAD 0x60 +#define HIL_IDD_DID_TYPE_CHAR 0x40 /* Character Entry */ +#define HIL_IDD_DID_CHAR_BARCODE_MASK 0xfc /* Barcode Reader */ +#define HIL_IDD_DID_CHAR_BARCODE 0x5c +#define HIL_IDD_DID_CHAR_RSVD1_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD1 0x58 +#define HIL_IDD_DID_CHAR_RSVD2_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD2 0x50 +#define HIL_IDD_DID_CHAR_RSVD3_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_CHAR_RSVD3 0x40 +#define HIL_IDD_DID_TYPE_OTHER 0x20 /* Miscellaneous */ +#define HIL_IDD_DID_OTHER_RSVD1_MASK 0xf0 /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD1 0x30 +#define HIL_IDD_DID_OTHER_BARCODE_MASK 0xfc /* Tone Generator */ +#define HIL_IDD_DID_OTHER_BARCODE 0x2c +#define HIL_IDD_DID_OTHER_RSVD2_MASK 0xfc /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD2 0x28 +#define HIL_IDD_DID_OTHER_RSVD3_MASK 0xf8 /* Reserved */ +#define HIL_IDD_DID_OTHER_RSVD3 0x20 +#define HIL_IDD_DID_TYPE_KEYPAD 0x00 /* Vectra Keyboard */ + +/* IDD record header + */ +#define HIL_IDD_HEADER_AXSET_MASK 0x03 /* Number of axis in a set */ +#define HIL_IDD_HEADER_RSC 0x04 /* Supports RSC command */ +#define HIL_IDD_HEADER_EXD 0x08 /* Supports EXD command */ +#define HIL_IDD_HEADER_IOD 0x10 /* IOD byte to follow */ +#define HIL_IDD_HEADER_16BIT 0x20 /* 16 (vs. 8) bit resolution */ +#define HIL_IDD_HEADER_ABS 0x40 /* Reports Absolute Position */ +#define HIL_IDD_HEADER_2X_AXIS 0x80 /* Two sets of 1-3 axis */ + +/* I/O Descriptor + */ +#define HIL_IDD_IOD_NBUTTON_MASK 0x07 /* Number of buttons */ +#define HIL_IDD_IOD_PROXIMITY 0x08 /* Proximity in/out events */ +#define HIL_IDD_IOD_PROMPT_MASK 0x70 /* Number of prompts/acks */ +#define HIL_IDD_IOD_PROMPT_SHIFT 4 +#define HIL_IDD_IOD_PROMPT 0x80 /* Generic prompt/ack */ + +#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \ +((header_packet) & HIL_IDD_HEADER_AXSET_MASK) + +#define HIL_IDD_NUM_AXSETS(header_packet) \ +(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS)) + +#define HIL_IDD_LEN(header_packet) \ +((4 - !(header_packet & HIL_IDD_HEADER_IOD) - \ + 2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) + \ + 2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) * \ + !!((header_packet) & HIL_IDD_HEADER_ABS)) + +/* The following HIL_IDD_* macros assume you have an array of + * packets and/or unpacked 8-bit data in the order that they + * were received. + */ + +#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \ +(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 : \ +(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) + \ + ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8) \ +* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1))) + +#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \ +((!(*(header_ptr) & HIL_IDD_HEADER_ABS) || \ + (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 : \ + ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) + \ + ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8))) + +#define HIL_IDD_IOD(header_ptr) \ +(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1)) + +#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) && \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT)) + +#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) && \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY)) + +#define HIL_IDD_NUM_BUTTONS(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) ? \ + (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0) + +#define HIL_IDD_NUM_PROMPTS(header_ptr) \ +((*header_ptr & HIL_IDD_HEADER_IOD) ? \ + ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK) \ + >> HIL_IDD_IOD_PROMPT_SHIFT) : 0) + +/* The response to HIL EXD commands -- the "extended describe record" */ +#define HIL_EXD_HEADER_WRG 0x03 /* Supports type2 WRG */ +#define HIL_EXD_HEADER_WRG_TYPE1 0x01 /* Supports type1 WRG */ +#define HIL_EXD_HEADER_WRG_TYPE2 0x02 /* Supports type2 WRG */ +#define HIL_EXD_HEADER_RRG 0x04 /* Supports RRG command */ +#define HIL_EXD_HEADER_RNM 0x10 /* Supports RNM command */ +#define HIL_EXD_HEADER_RST 0x20 /* Supports RST command */ +#define HIL_EXD_HEADER_LOCALE 0x40 /* Contains locale code */ + +#define HIL_EXD_NUM_RRG(header_ptr) \ +((*header_ptr & HIL_EXD_HEADER_RRG) ? \ + (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0) + +#define HIL_EXD_NUM_WWG(header_ptr) \ +((*header_ptr & HIL_EXD_HEADER_WRG) ? \ + (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) & \ + HIL_PKT_DATA_MASK) : 0) + +#define HIL_EXD_LEN(header_ptr) \ +(!!(*header_ptr & HIL_EXD_HEADER_RRG) + \ + !!(*header_ptr & HIL_EXD_HEADER_WRG) + \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE) + \ + 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1) + +#define HIL_EXD_LOCALE(header_ptr) \ +(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 : \ + (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK)) + +#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \ +(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1 : \ + (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 - \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) + \ + ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 - \ + !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8)) + +/* Device locale codes. */ + +/* Last defined locale code. Everything above this is "Reserved", + and note that this same table applies to the Device ID Byte where + keyboards may have a nationality code which is only 5 bits. */ +#define HIL_LOCALE_MAX 0x1f + +/* Map to hopefully useful strings. I was trying to make these look + like locale.aliases strings do; maybe that isn't the right table to + emulate. In either case, I didn't have much to work on. */ +#define HIL_LOCALE_MAP \ +"", /* 0x00 Reserved */ \ +"", /* 0x01 Reserved */ \ +"", /* 0x02 Reserved */ \ +"swiss.french", /* 0x03 Swiss/French */ \ +"portuguese", /* 0x04 Portuguese */ \ +"arabic", /* 0x05 Arabic */ \ +"hebrew", /* 0x06 Hebrew */ \ +"english.canadian", /* 0x07 Canadian English */ \ +"turkish", /* 0x08 Turkish */ \ +"greek", /* 0x09 Greek */ \ +"thai", /* 0x0a Thai (Thailand) */ \ +"italian", /* 0x0b Italian */ \ +"korean", /* 0x0c Hangul (Korea) */ \ +"dutch", /* 0x0d Dutch */ \ +"swedish", /* 0x0e Swedish */ \ +"german", /* 0x0f German */ \ +"chinese", /* 0x10 Chinese-PRC */ \ +"chinese", /* 0x11 Chinese-ROC */ \ +"swiss.french", /* 0x12 Swiss/French II */ \ +"spanish", /* 0x13 Spanish */ \ +"swiss.german", /* 0x14 Swiss/German II */ \ +"flemish", /* 0x15 Belgian (Flemish) */ \ +"finnish", /* 0x16 Finnish */ \ +"english.uk", /* 0x17 United Kingdom */ \ +"french.canadian", /* 0x18 French/Canadian */ \ +"swiss.german", /* 0x19 Swiss/German */ \ +"norwegian", /* 0x1a Norwegian */ \ +"french", /* 0x1b French */ \ +"danish", /* 0x1c Danish */ \ +"japanese", /* 0x1d Katakana */ \ +"spanish", /* 0x1e Latin American/Spanish*/\ +"english.us" /* 0x1f United States */ \ + + +/* HIL keycodes */ +#define HIL_KEYCODES_SET1_TBLSIZE 128 +#define HIL_KEYCODES_SET1 \ + KEY_5, KEY_RESERVED, KEY_RIGHTALT, KEY_LEFTALT, \ + KEY_RIGHTSHIFT, KEY_LEFTSHIFT, KEY_LEFTCTRL, KEY_SYSRQ, \ + KEY_KP4, KEY_KP8, KEY_KP5, KEY_KP9, \ + KEY_KP6, KEY_KP7, KEY_KPCOMMA, KEY_KPENTER, \ + KEY_KP1, KEY_KPSLASH, KEY_KP2, KEY_KPPLUS, \ + KEY_KP3, KEY_KPASTERISK, KEY_KP0, KEY_KPMINUS, \ + KEY_B, KEY_V, KEY_C, KEY_X, \ + KEY_Z, KEY_RESERVED, KEY_RESERVED, KEY_ESC, \ + KEY_6, KEY_F10, KEY_3, KEY_F11, \ + KEY_KPDOT, KEY_F9, KEY_TAB /*KP*/, KEY_F12, \ + KEY_H, KEY_G, KEY_F, KEY_D, \ + KEY_S, KEY_A, KEY_RESERVED, KEY_CAPSLOCK, \ + KEY_U, KEY_Y, KEY_T, KEY_R, \ + KEY_E, KEY_W, KEY_Q, KEY_TAB, \ + KEY_7, KEY_6, KEY_5, KEY_4, \ + KEY_3, KEY_2, KEY_1, KEY_GRAVE, \ + KEY_F13, KEY_F14, KEY_F15, KEY_F16, \ + KEY_F17, KEY_F18, KEY_F19, KEY_F20, \ + KEY_MENU, KEY_F4, KEY_F3, KEY_F2, \ + KEY_F1, KEY_VOLUMEUP, KEY_STOP, KEY_SENDFILE, \ + KEY_SYSRQ, KEY_F5, KEY_F6, KEY_F7, \ + KEY_F8, KEY_VOLUMEDOWN, KEY_DEL_EOL, KEY_DEL_EOS, \ + KEY_8, KEY_9, KEY_0, KEY_MINUS, \ + KEY_EQUAL, KEY_BACKSPACE, KEY_INS_LINE, KEY_DEL_LINE, \ + KEY_I, KEY_O, KEY_P, KEY_LEFTBRACE, \ + KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_INSERT, KEY_DELETE, \ + KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ + KEY_APOSTROPHE, KEY_ENTER, KEY_HOME, KEY_PAGEUP, \ + KEY_M, KEY_COMMA, KEY_DOT, KEY_SLASH, \ + KEY_BACKSLASH, KEY_SELECT, KEY_102ND, KEY_PAGEDOWN, \ + KEY_N, KEY_SPACE, KEY_NEXT, KEY_RESERVED, \ + KEY_LEFT, KEY_DOWN, KEY_UP, KEY_RIGHT + + +#define HIL_KEYCODES_SET3_TBLSIZE 128 +#define HIL_KEYCODES_SET3 \ + KEY_RESERVED, KEY_ESC, KEY_1, KEY_2, \ + KEY_3, KEY_4, KEY_5, KEY_6, \ + KEY_7, KEY_8, KEY_9, KEY_0, \ + KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_TAB, \ + KEY_Q, KEY_W, KEY_E, KEY_R, \ + KEY_T, KEY_Y, KEY_U, KEY_I, \ + KEY_O, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, \ + KEY_ENTER, KEY_LEFTCTRL, KEY_A, KEY_S, \ + KEY_D, KEY_F, KEY_G, KEY_H, \ + KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \ + KEY_APOSTROPHE,KEY_GRAVE, KEY_LEFTSHIFT, KEY_BACKSLASH, \ + KEY_Z, KEY_X, KEY_C, KEY_V, \ + KEY_B, KEY_N, KEY_M, KEY_COMMA, \ + KEY_DOT, KEY_SLASH, KEY_RIGHTSHIFT, KEY_KPASTERISK, \ + KEY_LEFTALT, KEY_SPACE, KEY_CAPSLOCK, KEY_F1, \ + KEY_F2, KEY_F3, KEY_F4, KEY_F5, \ + KEY_F6, KEY_F7, KEY_F8, KEY_F9, \ + KEY_F10, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_KP7, \ + KEY_KP8, KEY_KP9, KEY_KPMINUS, KEY_KP4, \ + KEY_KP5, KEY_KP6, KEY_KPPLUS, KEY_KP1, \ + KEY_KP2, KEY_KP3, KEY_KP0, KEY_KPDOT, \ + KEY_SYSRQ, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_UP, KEY_LEFT, KEY_DOWN, KEY_RIGHT, \ + KEY_HOME, KEY_PAGEUP, KEY_END, KEY_PAGEDOWN, \ + KEY_INSERT, KEY_DELETE, KEY_102ND, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_F1, KEY_F2, KEY_F3, KEY_F4, \ + KEY_F5, KEY_F6, KEY_F7, KEY_F8, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \ + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED + + +/* Response to POL command, the "poll record header" */ + +#define HIL_POL_NUM_AXES_MASK 0x03 /* Number of axis reported */ +#define HIL_POL_CTS 0x04 /* Device ready to receive data */ +#define HIL_POL_STATUS_PENDING 0x08 /* Device has status to report */ +#define HIL_POL_CHARTYPE_MASK 0x70 /* Type of character data to follow */ +#define HIL_POL_CHARTYPE_NONE 0x00 /* No character data to follow */ +#define HIL_POL_CHARTYPE_RSVD1 0x10 /* Reserved Set 1 */ +#define HIL_POL_CHARTYPE_ASCII 0x20 /* U.S. ASCII */ +#define HIL_POL_CHARTYPE_BINARY 0x30 /* Binary data */ +#define HIL_POL_CHARTYPE_SET1 0x40 /* Keycode Set 1 */ +#define HIL_POL_CHARTYPE_RSVD2 0x50 /* Reserved Set 2 */ +#define HIL_POL_CHARTYPE_SET2 0x60 /* Keycode Set 2 */ +#define HIL_POL_CHARTYPE_SET3 0x70 /* Keycode Set 3 */ +#define HIL_POL_AXIS_ALT 0x80 /* Data is from axis set 2 */ + + +#endif /* _HIL_H_ */ diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h new file mode 100644 index 000000000000..8df29ca48a13 --- /dev/null +++ b/include/linux/hil_mlc.h @@ -0,0 +1,168 @@ +/* + * HP Human Interface Loop Master Link Controller driver. + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + */ + +#include +#include +#include +#include +#include +#include + +typedef struct hil_mlc hil_mlc; + +/* The HIL has a complicated state engine. + * We define the structure of nodes in the state engine here. + */ +enum hilse_act { + /* HILSE_OUT prepares to receive input if the next node + * is an IN or EXPECT, and then sends the given packet. + */ + HILSE_OUT = 0, + + /* HILSE_CTS checks if the loop is busy. */ + HILSE_CTS, + + /* HILSE_OUT_LAST sends the given command packet to + * the last configured/running device on the loop. + */ + HILSE_OUT_LAST, + + /* HILSE_OUT_DISC sends the given command packet to + * the next device past the last configured/running one. + */ + HILSE_OUT_DISC, + + /* HILSE_FUNC runs a callback function with given arguments. + * a positive return value causes the "ugly" branch to be taken. + */ + HILSE_FUNC, + + /* HILSE_IN simply expects any non-errored packet to arrive + * within arg usecs. + */ + HILSE_IN = 0x100, + + /* HILSE_EXPECT expects a particular packet to arrive + * within arg usecs, any other packet is considered an error. + */ + HILSE_EXPECT, + + /* HILSE_EXPECT_LAST as above but dev field should be last + * discovered/operational device. + */ + HILSE_EXPECT_LAST, + + /* HILSE_EXPECT_LAST as above but dev field should be first + * undiscovered/inoperational device. + */ + HILSE_EXPECT_DISC +}; + +typedef int (hilse_func) (hil_mlc *mlc, int arg); +struct hilse_node { + enum hilse_act act; /* How to process this node */ + union { + hilse_func *func; /* Function to call if HILSE_FUNC */ + hil_packet packet; /* Packet to send or to compare */ + } object; + int arg; /* Timeout in usec or parm for func */ + int good; /* Node to jump to on success */ + int bad; /* Node to jump to on error */ + int ugly; /* Node to jump to on timeout */ +}; + +/* Methods for back-end drivers, e.g. hp_sdc_mlc */ +typedef int (hil_mlc_cts) (hil_mlc *mlc); +typedef void (hil_mlc_out) (hil_mlc *mlc); +typedef int (hil_mlc_in) (hil_mlc *mlc, suseconds_t timeout); + +struct hil_mlc_devinfo { + uint8_t idd[16]; /* Device ID Byte and Describe Record */ + uint8_t rsc[16]; /* Security Code Header and Record */ + uint8_t exd[16]; /* Extended Describe Record */ + uint8_t rnm[16]; /* Device name as returned by RNM command */ +}; + +struct hil_mlc_serio_map { + hil_mlc *mlc; + int di_revmap; + int didx; +}; + +/* How many (possibly old/detached) devices the we try to keep track of */ +#define HIL_MLC_DEVMEM 16 + +struct hil_mlc { + struct list_head list; /* hil_mlc is organized as linked list */ + + rwlock_t lock; + + void *priv; /* Data specific to a particular type of MLC */ + + int seidx; /* Current node in state engine */ + int istarted, ostarted; + + hil_mlc_cts *cts; + struct semaphore csem; /* Raised when loop idle */ + + hil_mlc_out *out; + struct semaphore osem; /* Raised when outpacket dispatched */ + hil_packet opacket; + + hil_mlc_in *in; + struct semaphore isem; /* Raised when a packet arrives */ + hil_packet ipacket[16]; + hil_packet imatch; + int icount; + struct timeval instart; + suseconds_t intimeout; + + int ddi; /* Last operational device id */ + int lcv; /* LCV to throttle loops */ + struct timeval lcv_tv; /* Time loop was started */ + + int di_map[7]; /* Maps below items to live devs */ + struct hil_mlc_devinfo di[HIL_MLC_DEVMEM]; + struct serio *serio[HIL_MLC_DEVMEM]; + struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM]; + hil_packet serio_opacket[HIL_MLC_DEVMEM]; + int serio_oidx[HIL_MLC_DEVMEM]; + struct hil_mlc_devinfo di_scratch; /* Temporary area */ + + int opercnt; + + struct tasklet_struct *tasklet; +}; + +int hil_mlc_register(hil_mlc *mlc); +int hil_mlc_unregister(hil_mlc *mlc); diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h new file mode 100644 index 000000000000..debd71515312 --- /dev/null +++ b/include/linux/hp_sdc.h @@ -0,0 +1,300 @@ +/* + * HP i8042 System Device Controller -- header + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * + * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A + * + * System Device Controller Microprocessor Firmware Theory of Operation + * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2 + * + */ + +#ifndef _LINUX_HP_SDC_H +#define _LINUX_HP_SDC_H + +#include +#include +#include +#include +#if defined(__hppa__) +#include +#endif + + +/* No 4X status reads take longer than this (in usec). + */ +#define HP_SDC_MAX_REG_DELAY 20000 + +typedef void (hp_sdc_irqhook) (int irq, void *dev_id, + uint8_t status, uint8_t data); + +int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback); +int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback); +int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback); +int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback); + +typedef struct { + int actidx; /* Start of act. Acts are atomic WRT I/O to SDC */ + int idx; /* Index within the act */ + int endidx; /* transaction is over and done if idx == endidx */ + uint8_t *seq; /* commands/data for the transaction */ + union { + hp_sdc_irqhook *irqhook; /* Callback, isr or tasklet context */ + struct semaphore *semaphore; /* Semaphore to sleep on. */ + } act; +} hp_sdc_transaction; +int hp_sdc_enqueue_transaction(hp_sdc_transaction *this); +int hp_sdc_dequeue_transaction(hp_sdc_transaction *this); + +/* The HP_SDC_ACT* values are peculiar to this driver. + * Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another + * act to perform the dealloc. + */ +#define HP_SDC_ACT_PRECMD 0x01 /* Send a command first */ +#define HP_SDC_ACT_DATAREG 0x02 /* Set data registers */ +#define HP_SDC_ACT_DATAOUT 0x04 /* Send data bytes */ +#define HP_SDC_ACT_POSTCMD 0x08 /* Send command after */ +#define HP_SDC_ACT_DATAIN 0x10 /* Collect data after */ +#define HP_SDC_ACT_DURING 0x1f +#define HP_SDC_ACT_SEMAPHORE 0x20 /* Raise semaphore after */ +#define HP_SDC_ACT_CALLBACK 0x40 /* Pass data to IRQ handler */ +#define HP_SDC_ACT_DEALLOC 0x80 /* Destroy transaction after */ +#define HP_SDC_ACT_AFTER 0xe0 +#define HP_SDC_ACT_DEAD 0x60 /* Act timed out. */ + +/* Rest of the flags are straightforward representation of the SDC interface */ +#define HP_SDC_STATUS_IBF 0x02 /* Input buffer full */ + +#define HP_SDC_STATUS_IRQMASK 0xf0 /* Bits containing "level 1" irq */ +#define HP_SDC_STATUS_PERIODIC 0x10 /* Periodic 10ms timer */ +#define HP_SDC_STATUS_USERTIMER 0x20 /* "Special purpose" timer */ +#define HP_SDC_STATUS_TIMER 0x30 /* Both PERIODIC and USERTIMER */ +#define HP_SDC_STATUS_REG 0x40 /* Data from an i8042 register */ +#define HP_SDC_STATUS_HILCMD 0x50 /* Command from HIL MLC */ +#define HP_SDC_STATUS_HILDATA 0x60 /* Data from HIL MLC */ +#define HP_SDC_STATUS_PUP 0x70 /* Sucessful power-up self test */ +#define HP_SDC_STATUS_KCOOKED 0x80 /* Key from cooked kbd */ +#define HP_SDC_STATUS_KRPG 0xc0 /* Key from Repeat Gen */ +#define HP_SDC_STATUS_KMOD_SUP 0x10 /* Shift key is up */ +#define HP_SDC_STATUS_KMOD_CUP 0x20 /* Control key is up */ + +#define HP_SDC_NMISTATUS_FHS 0x40 /* NMI is a fast handshake irq */ + +/* Internal i8042 registers (there are more, but they are not too useful). */ + +#define HP_SDC_USE 0x02 /* Resource usage (including OB bit) */ +#define HP_SDC_IM 0x04 /* Interrupt mask */ +#define HP_SDC_CFG 0x11 /* Configuration register */ +#define HP_SDC_KBLANGUAGE 0x12 /* Keyboard language */ + +#define HP_SDC_D0 0x70 /* General purpose data buffer 0 */ +#define HP_SDC_D1 0x71 /* General purpose data buffer 1 */ +#define HP_SDC_D2 0x72 /* General purpose data buffer 2 */ +#define HP_SDC_D3 0x73 /* General purpose data buffer 3 */ +#define HP_SDC_VT1 0x74 /* Timer for voice 1 */ +#define HP_SDC_VT2 0x75 /* Timer for voice 2 */ +#define HP_SDC_VT3 0x76 /* Timer for voice 3 */ +#define HP_SDC_VT4 0x77 /* Timer for voice 4 */ +#define HP_SDC_KBN 0x78 /* Which HIL devs are Nimitz */ +#define HP_SDC_KBC 0x79 /* Which HIL devs are cooked kbds */ +#define HP_SDC_LPS 0x7a /* i8042's view of HIL status */ +#define HP_SDC_LPC 0x7b /* i8042's view of HIL "control" */ +#define HP_SDC_RSV 0x7c /* Reserved "for testing" */ +#define HP_SDC_LPR 0x7d /* i8042 count of HIL reconfigs */ +#define HP_SDC_XTD 0x7e /* "Extended Configuration" register */ +#define HP_SDC_STR 0x7f /* i8042 self-test result */ + +/* Bitfields for above registers */ +#define HP_SDC_USE_LOOP 0x04 /* Command is currently on the loop. */ + +#define HP_SDC_IM_MASK 0x1f /* these bits not part of cmd/status */ +#define HP_SDC_IM_FH 0x10 /* Mask the fast handshake irq */ +#define HP_SDC_IM_PT 0x08 /* Mask the periodic timer irq */ +#define HP_SDC_IM_TIMERS 0x04 /* Mask the MT/DT/CT irq */ +#define HP_SDC_IM_RESET 0x02 /* Mask the reset key irq */ +#define HP_SDC_IM_HIL 0x01 /* Mask the HIL MLC irq */ + +#define HP_SDC_CFG_ROLLOVER 0x08 /* WTF is "N-key rollover"? */ +#define HP_SDC_CFG_KBD 0x10 /* There is a keyboard */ +#define HP_SDC_CFG_NEW 0x20 /* Supports/uses HIL MLC */ +#define HP_SDC_CFG_KBD_OLD 0x03 /* keyboard code for non-HIL */ +#define HP_SDC_CFG_KBD_NEW 0x07 /* keyboard code from HIL autoconfig */ +#define HP_SDC_CFG_REV 0x40 /* Code revision bit */ +#define HP_SDC_CFG_IDPROM 0x80 /* IDPROM present in kbd (not HIL) */ + +#define HP_SDC_LPS_NDEV 0x07 /* # devices autoconfigured on HIL */ +#define HP_SDC_LPS_ACSUCC 0x08 /* loop autoconfigured successfully */ +#define HP_SDC_LPS_ACFAIL 0x80 /* last loop autoconfigure failed */ + +#define HP_SDC_LPC_APE_IPF 0x01 /* HIL MLC APE/IPF (autopoll) set */ +#define HP_SDC_LPC_ARCONERR 0x02 /* i8042 autoreconfigs loop on err */ +#define HP_SDC_LPC_ARCQUIET 0x03 /* i8042 doesn't report autoreconfigs*/ +#define HP_SDC_LPC_COOK 0x10 /* i8042 cooks devices in _KBN */ +#define HP_SDC_LPC_RC 0x80 /* causes autoreconfig */ + +#define HP_SDC_XTD_REV 0x07 /* contains revision code */ +#define HP_SDC_XTD_REV_STRINGS(val, str) \ +switch (val) { \ + case 0x1: str = "1820-3712"; break; \ + case 0x2: str = "1820-4379"; break; \ + case 0x3: str = "1820-4784"; break; \ + default: str = "unknown"; \ +}; +#define HP_SDC_XTD_BEEPER 0x08 /* TI SN76494 beeper available */ +#define HP_SDC_XTD_BBRTC 0x20 /* OKI MSM-58321 BBRTC present */ + +#define HP_SDC_CMD_LOAD_RT 0x31 /* Load real time (from 8042) */ +#define HP_SDC_CMD_LOAD_FHS 0x36 /* Load the fast handshake timer */ +#define HP_SDC_CMD_LOAD_MT 0x38 /* Load the match timer */ +#define HP_SDC_CMD_LOAD_DT 0x3B /* Load the delay timer */ +#define HP_SDC_CMD_LOAD_CT 0x3E /* Load the cycle timer */ + +#define HP_SDC_CMD_SET_IM 0x40 /* 010xxxxx == set irq mask */ + +/* The documents provided do not explicitly state that all registers betweem + * 0x01 and 0x1f inclusive can be read by sending their register index as a + * command, but this is implied and appears to be the case. + */ +#define HP_SDC_CMD_READ_RAM 0x00 /* Load from i8042 RAM (autoinc) */ +#define HP_SDC_CMD_READ_USE 0x02 /* Undocumented! Load from usage reg */ +#define HP_SDC_CMD_READ_IM 0x04 /* Load current interrupt mask */ +#define HP_SDC_CMD_READ_KCC 0x11 /* Load primary kbd config code */ +#define HP_SDC_CMD_READ_KLC 0x12 /* Load primary kbd language code */ +#define HP_SDC_CMD_READ_T1 0x13 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T2 0x14 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T3 0x15 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T4 0x16 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_T5 0x17 /* Load timer output buffer byte 1 */ +#define HP_SDC_CMD_READ_D0 0xf0 /* Load from i8042 RAM location 0x70 */ +#define HP_SDC_CMD_READ_D1 0xf1 /* Load from i8042 RAM location 0x71 */ +#define HP_SDC_CMD_READ_D2 0xf2 /* Load from i8042 RAM location 0x72 */ +#define HP_SDC_CMD_READ_D3 0xf3 /* Load from i8042 RAM location 0x73 */ +#define HP_SDC_CMD_READ_VT1 0xf4 /* Load from i8042 RAM location 0x74 */ +#define HP_SDC_CMD_READ_VT2 0xf5 /* Load from i8042 RAM location 0x75 */ +#define HP_SDC_CMD_READ_VT3 0xf6 /* Load from i8042 RAM location 0x76 */ +#define HP_SDC_CMD_READ_VT4 0xf7 /* Load from i8042 RAM location 0x77 */ +#define HP_SDC_CMD_READ_KBN 0xf8 /* Load from i8042 RAM location 0x78 */ +#define HP_SDC_CMD_READ_KBC 0xf9 /* Load from i8042 RAM location 0x79 */ +#define HP_SDC_CMD_READ_LPS 0xfa /* Load from i8042 RAM location 0x7a */ +#define HP_SDC_CMD_READ_LPC 0xfb /* Load from i8042 RAM location 0x7b */ +#define HP_SDC_CMD_READ_RSV 0xfc /* Load from i8042 RAM location 0x7c */ +#define HP_SDC_CMD_READ_LPR 0xfd /* Load from i8042 RAM location 0x7d */ +#define HP_SDC_CMD_READ_XTD 0xfe /* Load from i8042 RAM location 0x7e */ +#define HP_SDC_CMD_READ_STR 0xff /* Load from i8042 RAM location 0x7f */ + +#define HP_SDC_CMD_SET_ARD 0xA0 /* Set emulated autorepeat delay */ +#define HP_SDC_CMD_SET_ARR 0xA2 /* Set emulated autorepeat rate */ +#define HP_SDC_CMD_SET_BELL 0xA3 /* Set voice 3 params for "beep" cmd */ +#define HP_SDC_CMD_SET_RPGR 0xA6 /* Set "RPG" irq rate (doesn't work) */ +#define HP_SDC_CMD_SET_RTMS 0xAD /* Set the RTC time (milliseconds) */ +#define HP_SDC_CMD_SET_RTD 0xAF /* Set the RTC time (days) */ +#define HP_SDC_CMD_SET_FHS 0xB2 /* Set fast handshake timer */ +#define HP_SDC_CMD_SET_MT 0xB4 /* Set match timer */ +#define HP_SDC_CMD_SET_DT 0xB7 /* Set delay timer */ +#define HP_SDC_CMD_SET_CT 0xBA /* Set cycle timer */ +#define HP_SDC_CMD_SET_RAMP 0xC1 /* Reset READ_RAM autoinc counter */ +#define HP_SDC_CMD_SET_D0 0xe0 /* Load to i8042 RAM location 0x70 */ +#define HP_SDC_CMD_SET_D1 0xe1 /* Load to i8042 RAM location 0x71 */ +#define HP_SDC_CMD_SET_D2 0xe2 /* Load to i8042 RAM location 0x72 */ +#define HP_SDC_CMD_SET_D3 0xe3 /* Load to i8042 RAM location 0x73 */ +#define HP_SDC_CMD_SET_VT1 0xe4 /* Load to i8042 RAM location 0x74 */ +#define HP_SDC_CMD_SET_VT2 0xe5 /* Load to i8042 RAM location 0x75 */ +#define HP_SDC_CMD_SET_VT3 0xe6 /* Load to i8042 RAM location 0x76 */ +#define HP_SDC_CMD_SET_VT4 0xe7 /* Load to i8042 RAM location 0x77 */ +#define HP_SDC_CMD_SET_KBN 0xe8 /* Load to i8042 RAM location 0x78 */ +#define HP_SDC_CMD_SET_KBC 0xe9 /* Load to i8042 RAM location 0x79 */ +#define HP_SDC_CMD_SET_LPS 0xea /* Load to i8042 RAM location 0x7a */ +#define HP_SDC_CMD_SET_LPC 0xeb /* Load to i8042 RAM location 0x7b */ +#define HP_SDC_CMD_SET_RSV 0xec /* Load to i8042 RAM location 0x7c */ +#define HP_SDC_CMD_SET_LPR 0xed /* Load to i8042 RAM location 0x7d */ +#define HP_SDC_CMD_SET_XTD 0xee /* Load to i8042 RAM location 0x7e */ +#define HP_SDC_CMD_SET_STR 0xef /* Load to i8042 RAM location 0x7f */ + +#define HP_SDC_CMD_DO_RTCW 0xc2 /* i8042 RAM 0x70 --> RTC */ +#define HP_SDC_CMD_DO_RTCR 0xc3 /* RTC[0x70 0:3] --> irq/status/data */ +#define HP_SDC_CMD_DO_BEEP 0xc4 /* i8042 RAM 0x70-74 --> beeper,VT3 */ +#define HP_SDC_CMD_DO_HIL 0xc5 /* i8042 RAM 0x70-73 --> + HIL MLC R0,R1 i8042 HIL watchdog */ + +/* Values used to (de)mangle input/output to/from the HIL MLC */ +#define HP_SDC_DATA 0x40 /* Data from an 8042 register */ +#define HP_SDC_HIL_CMD 0x50 /* Data from HIL MLC R1/8042 */ +#define HP_SDC_HIL_R1MASK 0x0f /* Contents of HIL MLC R1 0:3 */ +#define HP_SDC_HIL_AUTO 0x10 /* Set if POL results from i8042 */ +#define HP_SDC_HIL_ISERR 0x80 /* Has meaning as in next 4 values */ +#define HP_SDC_HIL_RC_DONE 0x80 /* i8042 auto-configured loop */ +#define HP_SDC_HIL_ERR 0x81 /* HIL MLC R2 had a bit set */ +#define HP_SDC_HIL_TO 0x82 /* i8042 HIL watchdog expired */ +#define HP_SDC_HIL_RC 0x84 /* i8042 is auto-configuring loop */ +#define HP_SDC_HIL_DAT 0x60 /* Data from HIL MLC R0 */ + + +typedef struct { + rwlock_t ibf_lock; + rwlock_t lock; /* user/tasklet lock */ + rwlock_t rtq_lock; /* isr/tasklet lock */ + rwlock_t hook_lock; /* isr/user lock for handler add/del */ + + unsigned int irq, nmi; /* Our IRQ lines */ + unsigned long base_io, status_io, data_io; /* Our IO ports */ + + uint8_t im; /* Interrupt mask */ + int set_im; /* Interrupt mask needs to be set. */ + + int ibf; /* Last known status of IBF flag */ + uint8_t wi; /* current i8042 write index */ + uint8_t r7[4]; /* current i8042[0x70 - 0x74] values */ + uint8_t r11, r7e; /* Values from version/revision regs */ + + hp_sdc_irqhook *timer, *reg, *hil, *pup, *cooked; + +#define HP_SDC_QUEUE_LEN 16 + hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */ + + int rcurr, rqty; /* Current read transact in process */ + struct timeval rtv; /* Time when current read started */ + int wcurr; /* Current write transact in process */ + + int dev_err; /* carries status from registration */ +#if defined(__hppa__) + struct parisc_device *dev; +#elif defined(__mc68000__) + void *dev; +#else +#error No support for device registration on this arch yet. +#endif + + struct timer_list kicker; /* Keeps below task alive */ + struct tasklet_struct task; + +} hp_i8042_sdc; + +#endif /* _LINUX_HP_SDC_H */ diff --git a/include/linux/input.h b/include/linux/input.h index e8c296ff6257..d7836311ada9 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -644,6 +644,7 @@ struct input_absinfo { #define BUS_ADB 0x17 #define BUS_I2C 0x18 #define BUS_HOST 0x19 +#define BUS_GSC 0x1A /* * Values describing the status of an effect -- GitLab From 27678201333e1b9a9a7fc8e685d858132956113e Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 21 Oct 2005 23:11:03 -0400 Subject: [PATCH 0390/1519] [PARISC] defconfig updates defconfig updates from Kyle McMartin, Grant Grundler, and Matthew Wilcox. Signed-off-by: Kyle McMartin --- arch/parisc/configs/712_defconfig | 456 +++++++++++-------- arch/parisc/configs/a500_defconfig | 551 ++++++++++++++--------- arch/parisc/configs/b180_defconfig | 309 ++++++++----- arch/parisc/configs/c3000_defconfig | 676 ++++++++++++++++++---------- arch/parisc/defconfig | 618 ++++++++++++++++++------- 5 files changed, 1705 insertions(+), 905 deletions(-) diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 6efaa9293eef..3e013f55df64 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -1,12 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:20:32 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:04:34 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -15,35 +19,40 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -65,9 +74,18 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -81,8 +99,6 @@ CONFIG_GSC_LASI=y # CONFIG_GSC_WAX is not set # CONFIG_EISA is not set # CONFIG_PCI is not set -CONFIG_CHASSIS_LCD_LED=y -# CONFIG_PDC_CHASSIS is not set # # PCCARD (PCMCIA/CardBus) support @@ -90,12 +106,15 @@ CONFIG_CHASSIS_LCD_LED=y # CONFIG_PCCARD is not set # -# PC-card bridges +# PCI Hotplug Support # # -# PCI Hotplug Support +# PA-RISC specific drivers # +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -104,137 +123,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y -CONFIG_53C700_LE_ON_BE=y -# CONFIG_SCSI_ZALON is not set -CONFIG_SCSI_DEBUG=m - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -243,12 +132,14 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m CONFIG_NET_KEY=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -262,8 +153,10 @@ CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y # # IP: Virtual Server Configuration @@ -272,6 +165,7 @@ CONFIG_IP_TCPDIAG=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set # # IP: Netfilter Configuration @@ -279,11 +173,14 @@ CONFIG_NETFILTER=y CONFIG_IP_NF_CONNTRACK=m # CONFIG_IP_NF_CT_ACCT is not set CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set CONFIG_IP_NF_CT_PROTO_SCTP=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m @@ -307,21 +204,23 @@ CONFIG_IP_NF_MATCH_OWNER=m # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_REALM is not set CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_CONNMARK=m CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m -# CONFIG_IP_NF_NAT_LOCAL is not set CONFIG_IP_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m @@ -333,6 +232,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_TARGET_CONNMARK=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m @@ -340,10 +240,11 @@ CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_XFRM=y -CONFIG_XFRM_USER=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) @@ -362,10 +263,6 @@ CONFIG_LLC2=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -373,17 +270,162 @@ CONFIG_LLC2=m # Network testing # CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_LASI700=y +CONFIG_53C700_LE_ON_BE=y +# CONFIG_SCSI_ZALON is not set +CONFIG_SCSI_DEBUG=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -391,6 +433,7 @@ CONFIG_TUN=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -414,6 +457,7 @@ CONFIG_NET_RADIO=y # # CONFIG_STRIP is not set # CONFIG_ATMEL is not set +# CONFIG_HOSTAP is not set # # Wan interfaces @@ -431,6 +475,8 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -459,19 +505,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -CONFIG_HP_SDC=y -CONFIG_HIL_MLC=y -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -483,6 +516,7 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL_OLD=y # CONFIG_KEYBOARD_HIL is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y @@ -493,6 +527,19 @@ CONFIG_MOUSE_HIL=m # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -511,7 +558,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -546,11 +592,13 @@ CONFIG_GEN_RTC_X=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set -# CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# +# TPM devices +# + # # I2C support # @@ -561,10 +609,20 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_W1 is not set +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -579,28 +637,36 @@ CONFIG_MAX_RAW_DEVS=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_STI=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=128 CONFIG_DUMMY_CONSOLE_ROWS=48 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # # Logo configuration @@ -610,6 +676,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -656,10 +723,6 @@ CONFIG_SND_HARMONY=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - # # USB Gadget Support # @@ -670,11 +733,21 @@ CONFIG_SND_HARMONY=y # # CONFIG_MMC is not set +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y @@ -682,20 +755,24 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -722,14 +799,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -# CONFIG_TMPFS_SECURITY is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -754,16 +828,19 @@ CONFIG_UFS_FS=m # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y @@ -778,6 +855,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -838,13 +916,19 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -865,6 +949,7 @@ CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m @@ -881,10 +966,15 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m +# +# Hardware crypto devices +# + # # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index 30fc03ed0cfb..955ef5084f3e 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4-pa1 -# Wed Feb 16 11:32:49 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:04:54 2005 # CONFIG_PARISC=y CONFIG_MMU=y @@ -10,6 +10,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -19,26 +20,32 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -48,6 +55,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -74,7 +82,19 @@ CONFIG_PREFETCH=y CONFIG_64BIT=y CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set CONFIG_COMPAT=y CONFIG_NR_CPUS=8 @@ -85,7 +105,7 @@ CONFIG_NR_CPUS=8 # CONFIG_GSC is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y @@ -96,6 +116,8 @@ CONFIG_IOMMU_SBA=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m +# CONFIG_PCMCIA_LOAD_CIS is not set +CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # @@ -104,7 +126,6 @@ CONFIG_CARDBUS=y CONFIG_YENTA=m CONFIG_PD6729=m CONFIG_I82092=m -CONFIG_TCIC=m CONFIG_PCCARD_NONSTATIC=m # @@ -126,6 +147,203 @@ CONFIG_PDC_STABLE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_LIMIT is not set +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +# CONFIG_IP6_NF_MATCH_MULTIPORT is not set +# CONFIG_IP6_NF_MATCH_OWNER is not set +# CONFIG_IP6_NF_MATCH_MARK is not set +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AHESP is not set +# CONFIG_IP6_NF_MATCH_LENGTH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID3 is not set + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -138,6 +356,11 @@ CONFIG_BINFMT_ELF=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -169,7 +392,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -189,6 +411,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -201,6 +424,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -215,6 +439,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers @@ -229,14 +454,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -246,8 +469,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set CONFIG_SCSI_QLOGIC_FC=m # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set @@ -258,7 +479,9 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA22XX is not set CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m @@ -288,8 +511,11 @@ CONFIG_MD_RAID1=y # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # @@ -303,159 +529,24 @@ CONFIG_FUSION_CTL=m # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration +# Network device support # -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -463,6 +554,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m @@ -479,6 +571,7 @@ CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set CONFIG_PCMCIA_XIRCOM=m # CONFIG_PCMCIA_XIRTULIP is not set CONFIG_HP100=m @@ -489,48 +582,43 @@ CONFIG_PCNET32=m # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=m +# CONFIG_EEPRO100 is not set CONFIG_E100=m -CONFIG_E100_NAPI=y # CONFIG_FEALNX is not set -CONFIG_NATSEMI=m +# CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set -CONFIG_EPIC100=m +# CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y +# CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_DL2K=m +# CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -CONFIG_IXGB=m -CONFIG_IXGB_NAPI=y -CONFIG_S2IO=m -CONFIG_S2IO_NAPI=y -# CONFIG_2BUFF_MODE is not set +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set # # Token Ring devices @@ -560,6 +648,7 @@ CONFIG_PCMCIA_RAYCS=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m +# CONFIG_NORTEL_HERMES is not set CONFIG_PCI_HERMES=m # CONFIG_ATMEL is not set @@ -567,6 +656,7 @@ CONFIG_PCI_HERMES=m # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set CONFIG_AIRO_CS=m CONFIG_PCMCIA_WL3501=m @@ -574,6 +664,7 @@ CONFIG_PCMCIA_WL3501=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -607,6 +698,8 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -632,13 +725,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - # # Input Device Drivers # @@ -648,6 +734,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -667,7 +759,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -677,6 +768,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set @@ -707,6 +799,11 @@ CONFIG_GEN_RTC_X=y CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + # # I2C support # @@ -717,10 +814,20 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_W1 is not set +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -742,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 +# CONFIG_STI_CONSOLE is not set # # Sound @@ -751,13 +859,9 @@ CONFIG_DUMMY_CONSOLE_ROWS=64 # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -772,17 +876,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # InfiniBand support # -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y @@ -794,22 +899,20 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -836,13 +939,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -867,15 +968,18 @@ CONFIG_UFS_FS=m # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -890,6 +994,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -906,15 +1011,15 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m +# CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set -CONFIG_NLS_CODEPAGE_863=m +# CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set -CONFIG_NLS_CODEPAGE_865=m +# CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set @@ -926,10 +1031,10 @@ CONFIG_NLS_CODEPAGE_865=m # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set @@ -950,11 +1055,15 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_IOREMAP is not set @@ -974,25 +1083,26 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m @@ -1004,6 +1114,7 @@ CONFIG_CRYPTO_TEST=m # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 46c9511f3229..8819e7e6ae3f 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -1,12 +1,15 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:35:54 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:06:10 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Code maturity level options @@ -14,33 +17,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_EXPERIMENTAL is not set CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -60,8 +69,14 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -78,11 +93,25 @@ CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y # CONFIG_PCI_LBA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# PA-RISC specific drivers +# CONFIG_CHASSIS_LCD_LED=y # CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -90,6 +119,64 @@ CONFIG_CHASSIS_LCD_LED=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -99,8 +186,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -111,10 +204,8 @@ CONFIG_STANDALONE=y # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # @@ -125,19 +216,17 @@ CONFIG_PARPORT_GSC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -149,6 +238,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=y # # ATA/ATAPI/MFM/RLL support @@ -158,6 +248,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -170,6 +261,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -183,16 +275,16 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -202,14 +294,11 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set @@ -219,7 +308,6 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y CONFIG_53C700_LE_ON_BE=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -231,7 +319,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -240,12 +327,12 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set @@ -263,6 +350,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -271,6 +359,9 @@ CONFIG_MD_RAID5=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -283,58 +374,8 @@ CONFIG_MD_RAID5=y # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_NETFILTER is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -346,6 +387,11 @@ CONFIG_NETDEVICES=y # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # @@ -354,8 +400,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_LASI_82596 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -369,6 +415,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set @@ -384,12 +431,15 @@ CONFIG_TULIP=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -413,12 +463,12 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # -# CONFIG_AIRO is not set # CONFIG_HERMES is not set # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # +# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # @@ -435,6 +485,8 @@ CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -463,24 +515,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -# CONFIG_HP_SDC is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y +# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -488,7 +529,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL is not set CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set @@ -501,6 +542,19 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_UINPUT is not set # CONFIG_HP_SDC_RTC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +# CONFIG_HP_SDC is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -519,8 +573,11 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_FOURPORT is not set +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_HUB6 is not set # # Non-8250 serial port support @@ -529,6 +586,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_PDC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -555,10 +613,13 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# +# TPM devices +# + # # I2C support # @@ -569,10 +630,20 @@ CONFIG_GEN_RTC=y # # CONFIG_W1 is not set +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -587,6 +658,11 @@ CONFIG_GEN_RTC=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -595,6 +671,7 @@ CONFIG_FB=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -606,18 +683,19 @@ CONFIG_FB_STI=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -630,6 +708,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -639,13 +718,9 @@ CONFIG_LOGO_PARISC_CLUT224=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -657,24 +732,37 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_MMC is not set +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -697,11 +785,10 @@ CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -719,15 +806,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -785,13 +876,19 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -815,6 +912,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -831,9 +929,14 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set +# +# Hardware crypto devices +# + # # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index 67aca6ccc9b0..9d86b6b1ebd1 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -1,12 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-pa5 -# Wed Jan 5 13:26:49 2005 +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:06:31 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -15,26 +19,31 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +53,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -66,10 +76,19 @@ CONFIG_KMOD=y CONFIG_PA8X00=y CONFIG_PA20=y CONFIG_PREFETCH=y -# CONFIG_PARISC64 is not set # CONFIG_64BIT is not set # CONFIG_SMP is not set -# CONFIG_DISCONTIGMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -79,13 +98,10 @@ CONFIG_PREFETCH=y # CONFIG_GSC is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y -CONFIG_SUPERIO=y -CONFIG_CHASSIS_LCD_LED=y -# CONFIG_PDC_CHASSIS is not set # # PCCARD (PCMCIA/CardBus) support @@ -93,13 +109,17 @@ CONFIG_CHASSIS_LCD_LED=y # CONFIG_PCCARD is not set # -# PC-card bridges +# PCI Hotplug Support # +# CONFIG_HOTPLUG_PCI is not set # -# PCI Hotplug Support +# PA-RISC specific drivers # -# CONFIG_HOTPLUG_PCI is not set +CONFIG_SUPERIO=y +CONFIG_CHASSIS_LCD_LED=y +# CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_STABLE=y # # Executable file formats @@ -107,6 +127,186 @@ CONFIG_CHASSIS_LCD_LED=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +CONFIG_NETFILTER_DEBUG=y +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_DCCP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_LIMIT is not set +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_MULTIPORT is not set +CONFIG_IP6_NF_MATCH_OWNER=m +# CONFIG_IP6_NF_MATCH_MARK is not set +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AHESP is not set +CONFIG_IP6_NF_MATCH_LENGTH=m +# CONFIG_IP6_NF_MATCH_EUI64 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +# CONFIG_IP6_NF_RAW is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -119,6 +319,11 @@ CONFIG_BINFMT_ELF=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -141,14 +346,14 @@ CONFIG_FW_LOADER=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_UMEM=m +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -158,6 +363,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -201,6 +407,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -218,6 +425,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -230,6 +438,7 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -242,7 +451,9 @@ CONFIG_SCSI_MULTI_LUN=y # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=m +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -258,25 +469,26 @@ CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_ADVANSYS is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=m +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set CONFIG_SCSI_SATA_PROMISE=m +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set CONFIG_SCSI_SATA_SIL=m # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set CONFIG_SCSI_SATA_VIA=m # CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_SCSI_SATA_INTEL_COMBINED=y # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set @@ -286,20 +498,17 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set -CONFIG_SCSI_QLOGIC_FC=m -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set -CONFIG_SCSI_QLOGIC_1280=m -# CONFIG_SCSI_QLOGIC_1280_1040 is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA6322=m +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -316,19 +525,24 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID6 is not set -CONFIG_MD_MULTIPATH=y +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set # # Fusion MPT device support # -CONFIG_FUSION=m -CONFIG_FUSION_MAX_SGE=40 +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m # @@ -342,164 +556,32 @@ CONFIG_FUSION_CTL=m # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_DEBUG=y - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -# CONFIG_IP_NF_RAW is not set -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -CONFIG_IP_NF_COMPAT_IPFWADM=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_EQUALIZER is not set CONFIG_TUN=m -# CONFIG_ETHERTAP is not set # # ARCnet devices # # CONFIG_ARCNET is not set +# +# PHY device support +# +# CONFIG_PHYLIB is not set + # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m -CONFIG_HAPPYMEAL=m +# CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -514,28 +596,22 @@ CONFIG_TULIP_MMIO=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y -CONFIG_PCNET32=m +# CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set -CONFIG_ADAPTEC_STARFIRE=m -# CONFIG_ADAPTEC_STARFIRE_NAPI is not set -CONFIG_B44=m +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=m -# CONFIG_EEPRO100_PIO is not set +# CONFIG_EEPRO100 is not set CONFIG_E100=m -# CONFIG_E100_NAPI is not set # CONFIG_FEALNX is not set -CONFIG_NATSEMI=m +# CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -554,15 +630,18 @@ CONFIG_E1000=m # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # -CONFIG_IXGB=y -CONFIG_IXGB_NAPI=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set # CONFIG_S2IO is not set # @@ -593,6 +672,8 @@ CONFIG_PPPOE=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -621,16 +702,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - # # Input Device Drivers # @@ -648,6 +719,16 @@ CONFIG_INPUT_MOUSE=y # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set +# +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -666,7 +747,6 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -676,6 +756,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_PDC_CONSOLE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -698,11 +779,15 @@ CONFIG_GEN_RTC_X=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + # # I2C support # @@ -713,10 +798,20 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_W1 is not set +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -731,6 +826,11 @@ CONFIG_MAX_RAW_DEVS=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set @@ -739,6 +839,7 @@ CONFIG_FB=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set @@ -751,18 +852,20 @@ CONFIG_FB_STI=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -775,6 +878,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -784,7 +888,78 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AD1889=y +# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set # # Open Sound System @@ -794,6 +969,8 @@ CONFIG_SOUND=y # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -804,23 +981,23 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m @@ -829,12 +1006,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_HP8200e=y +CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y @@ -846,21 +1022,25 @@ CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -CONFIG_USB_KBTAB=m +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -CONFIG_USB_HPUSBSCSI=m # # USB Multimedia devices @@ -879,6 +1059,7 @@ CONFIG_USB_HPUSBSCSI=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set # # USB port drivers @@ -894,7 +1075,6 @@ CONFIG_USB_HPUSBSCSI=m # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m @@ -903,10 +1083,12 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -919,28 +1101,42 @@ CONFIG_USB_LEGOTOWER=m # # CONFIG_MMC is not set +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -966,13 +1162,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -996,16 +1190,19 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -1014,6 +1211,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1074,13 +1272,19 @@ CONFIG_OPROFILE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options @@ -1092,21 +1296,22 @@ CONFIG_MAGIC_SYSRQ=y # Cryptographic options # CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_HMAC is not set CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m +# CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set @@ -1116,10 +1321,15 @@ CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m +# +# Hardware crypto devices +# + # # Library routines # CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index fdae21c503d7..f38a4620d24f 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -1,38 +1,56 @@ # # Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc5-pa1 +# Fri Oct 21 23:01:33 2005 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_AUDIT is not set # CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -45,10 +63,21 @@ CONFIG_IOSCHED_DEADLINE=y CONFIG_PA7000=y # CONFIG_PA7100LC is not set # CONFIG_PA7200 is not set +# CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -# CONFIG_64BIT is not set # CONFIG_SMP is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set # CONFIG_PREEMPT is not set # CONFIG_HPUX is not set @@ -65,14 +94,29 @@ CONFIG_EISA_NAMES=y # CONFIG_ISA is not set CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# PA-RISC specific drivers +# CONFIG_SUPERIO=y CONFIG_CHASSIS_LCD_LED=y CONFIG_PDC_CHASSIS=y +CONFIG_PDC_STABLE=y # # Executable file formats @@ -80,6 +124,80 @@ CONFIG_PDC_CHASSIS=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + # # Device Drivers # @@ -87,8 +205,16 @@ CONFIG_BINFMT_ELF=y # # Generic Driver Options # +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + # # Memory Technology Devices (MTD) # @@ -99,12 +225,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_GSC=y -# CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # @@ -114,18 +238,31 @@ CONFIG_PARPORT_GSC=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -135,6 +272,7 @@ CONFIG_BLK_DEV_INITRD=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -147,53 +285,59 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y -CONFIG_53C700_MEM_MAPPED=y CONFIG_53C700_LE_ON_BE=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set CONFIG_SCSI_ZALON=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y @@ -202,7 +346,8 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -217,15 +362,20 @@ CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set CONFIG_MD_RAID5=y # CONFIG_MD_RAID6 is not set # CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -238,80 +388,23 @@ CONFIG_MD_RAID5=y # CONFIG_I2O is not set # -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_NETLINK_DEV=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -321,6 +414,7 @@ CONFIG_NET_ETHERNET=y CONFIG_LASI_82596=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set @@ -336,6 +430,7 @@ CONFIG_TULIP=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -361,30 +456,37 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # -# CONFIG_ACENIC is not set -CONFIG_DL2K=y +CONFIG_ACENIC=y +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -399,38 +501,30 @@ CONFIG_NET_RADIO=y # # Wireless 802.11b ISA/PCI cards support # -CONFIG_AIRO=y # CONFIG_HERMES is not set # CONFIG_ATMEL is not set -CONFIG_NET_WIRELESS=y # -# Token Ring devices +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # -# CONFIG_TR is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y # # Wan interfaces # # CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -459,51 +553,67 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_GSCPS2=y -CONFIG_HP_SDC=y -CONFIG_HIL_MLC=y -# CONFIG_SERIO_PCIPS2 is not set - # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_HIL_OLD=y CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_HIL is not set CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDDLER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set -# CONFIG_INPUT_JOYDUMP is not set +# CONFIG_JOYSTICK_JOYDUMP is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_INPUT_MISC=y -# CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_UINPUT is not set CONFIG_HP_SDC_RTC=y +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +CONFIG_SERIO_GSCPS2=y +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + # # Character devices # @@ -522,16 +632,16 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # -# CONFIG_SERIAL_MUX is not set -# CONFIG_PDC_CONSOLE is not set +CONFIG_SERIAL_MUX=y +CONFIG_SERIAL_MUX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -540,12 +650,6 @@ CONFIG_PRINTER=y # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - # # IPMI # @@ -555,7 +659,6 @@ CONFIG_PRINTER=y # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -565,20 +668,39 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + # # I2C support # # CONFIG_I2C is not set +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + # # Misc devices # +# +# Multimedia Capabilities Port drivers +# + # # Multimedia devices # @@ -593,34 +715,45 @@ CONFIG_GEN_RTC=y # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_STI=y +# CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_STI_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y +CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -629,6 +762,7 @@ CONFIG_FONT_8x16=y # Logo configuration # # CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -638,17 +772,94 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AD1889=y +# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# GSC devices +# +CONFIG_SND_HARMONY=y # # Open Sound System # # CONFIG_SOUND_PRIME is not set -# CONFIG_SOUND_HARMONY is not set # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -658,26 +869,36 @@ CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# # CONFIG_USB_STORAGE is not set # -# USB Human Interface Devices (HID) +# USB Input Devices # # CONFIG_USB_HID is not set @@ -688,16 +909,23 @@ CONFIG_USB_OHCI_HCD=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -709,13 +937,15 @@ CONFIG_USB_OHCI_HCD=y # # -# USB Network adaptors +# USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y # # USB port drivers @@ -732,35 +962,63 @@ CONFIG_USB_OHCI_HCD=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# # # USB Gadget Support # # CONFIG_USB_GADGET is not set +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -773,7 +1031,8 @@ CONFIG_JOLIET=y # # DOS/FAT/NT Filesystems # -# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # @@ -781,11 +1040,11 @@ CONFIG_JOLIET=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -809,23 +1068,28 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -861,6 +1125,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -885,17 +1150,24 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SLAB is not set CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_RWLOCK is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_IOREMAP is not set +# CONFIG_DEBUG_FS is not set # # Security options # +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # @@ -909,6 +1181,8 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -916,11 +1190,23 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set +# +# Hardware crypto devices +# + # # Library routines # +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set -- GitLab From 6958ae318bb1af5e0b77968384700fb184fb8893 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 21 Oct 2005 23:11:27 -0400 Subject: [PATCH 0391/1519] [PARISC] Update MAINTAINERS and CREDITS Add Kyle McMartin and Thibaut Varene as maintainers for ALSA ad1889 driver. Add myself to CREDITS. Signed-off-by: Kyle McMartin --- CREDITS | 6 ++++++ MAINTAINERS | 9 +++++++++ 2 files changed, 15 insertions(+) diff --git a/CREDITS b/CREDITS index a347520bef2d..5b1edf3a38a2 100644 --- a/CREDITS +++ b/CREDITS @@ -2247,6 +2247,12 @@ S: 249 Nichols Avenue S: Syracuse, New York 13206 S: USA +N: Kyle McMartin +E: kyle@parisc-linux.org +D: Linux/PARISC hacker +D: AD1889 sound driver +S: Ottawa, Canada + N: Dirk Melchers E: dirk@merlin.nbg.sub.org D: 8 bit XT hard disk driver for OMTI5520 diff --git a/MAINTAINERS b/MAINTAINERS index 767fb610963e..248b93b32fc4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -197,6 +197,15 @@ M: Thorsten Knabe W: http://linux.thorsten-knabe.de S: Maintained +AD1889 SOUND DRIVER +P: Kyle McMartin +M: kyle@parisc-linux.org +P: Thibaut Varene +M: T-Bone@parisc-linux.org +W: http://wiki.parisc-linux.org/AD1889 +L: parisc-linux@lists.parisc-linux.org +S: Maintained + ADM1025 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org -- GitLab From 2d5a2ae52d8863275e2d26398bc010249ea709d1 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 00:14:31 -0400 Subject: [PATCH 0392/1519] drivers/block/sx8: several minor changes * Newer hardware doesn't corrupt data when the queue depth is greater than one. Rather than force the user to recompile with a greater queue depth, make it a module parameter. * update copyright date * add MODULE_VERSION() * trim trailing whitespace * move CARM_SG_BOUNDARY to a separate enum, since its unsigned long * bump to version 1.0 --- drivers/block/sx8.c | 50 +++++++++++++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 13 deletions(-) diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index d57007b92f77..b5f612679a31 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -1,7 +1,7 @@ /* * sx8.c: Driver for Promise SATA SX8 looks-like-I2O hardware * - * Copyright 2004 Red Hat, Inc. + * Copyright 2004-2005 Red Hat, Inc. * * Author/maintainer: Jeff Garzik * @@ -31,10 +31,6 @@ #include #include -MODULE_AUTHOR("Jeff Garzik"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Promise SATA SX8 block driver"); - #if 0 #define CARM_DEBUG #define CARM_VERBOSE_DEBUG @@ -45,9 +41,35 @@ MODULE_DESCRIPTION("Promise SATA SX8 block driver"); #undef CARM_NDEBUG #define DRV_NAME "sx8" -#define DRV_VERSION "0.8" +#define DRV_VERSION "1.0" #define PFX DRV_NAME ": " +MODULE_AUTHOR("Jeff Garzik"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Promise SATA SX8 block driver"); +MODULE_VERSION(DRV_VERSION); + +/* + * SX8 hardware has a single message queue for all ATA ports. + * When this driver was written, the hardware (firmware?) would + * corrupt data eventually, if more than one request was outstanding. + * As one can imagine, having 8 ports bottlenecking on a single + * command hurts performance. + * + * Based on user reports, later versions of the hardware (firmware?) + * seem to be able to survive with more than one command queued. + * + * Therefore, we default to the safe option -- 1 command -- but + * allow the user to increase this. + * + * SX8 should be able to support up to ~60 queued commands (CARM_MAX_REQ), + * but problems seem to occur when you exceed ~30, even on newer hardware. + */ +static int max_queue = 1; +module_param(max_queue, int, 0444); +MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30, safe==1)"); + + #define NEXT_RESP(idx) ((idx + 1) % RMSG_Q_LEN) /* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */ @@ -90,12 +112,10 @@ enum { /* command message queue limits */ CARM_MAX_REQ = 64, /* max command msgs per host */ - CARM_MAX_Q = 1, /* one command at a time */ CARM_MSG_LOW_WATER = (CARM_MAX_REQ / 4), /* refill mark */ /* S/G limits, host-wide and per-request */ CARM_MAX_REQ_SG = 32, /* max s/g entries per request */ - CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */ CARM_MAX_HOST_SG = 600, /* max s/g entries per host */ CARM_SG_LOW_WATER = (CARM_MAX_HOST_SG / 4), /* re-fill mark */ @@ -181,6 +201,10 @@ enum { FL_DYN_MAJOR = (1 << 17), }; +enum { + CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */ +}; + enum scatter_gather_types { SGT_32BIT = 0, SGT_64BIT = 1, @@ -448,7 +472,7 @@ static inline int carm_lookup_bucket(u32 msg_size) for (i = 0; i < ARRAY_SIZE(msg_sizes); i++) if (msg_size <= msg_sizes[i]) return i; - + return -ENOENT; } @@ -509,7 +533,7 @@ static struct carm_request *carm_get_request(struct carm_host *host) if (host->hw_sg_used >= (CARM_MAX_HOST_SG - CARM_MAX_REQ_SG)) return NULL; - for (i = 0; i < CARM_MAX_Q; i++) + for (i = 0; i < max_queue; i++) if ((host->msg_alloc & (1ULL << i)) == 0) { struct carm_request *crq = &host->req[i]; crq->port = NULL; @@ -521,14 +545,14 @@ static struct carm_request *carm_get_request(struct carm_host *host) assert(host->n_msgs <= CARM_MAX_REQ); return crq; } - + DPRINTK("no request available, returning NULL\n"); return NULL; } static int carm_put_request(struct carm_host *host, struct carm_request *crq) { - assert(crq->tag < CARM_MAX_Q); + assert(crq->tag < max_queue); if (unlikely((host->msg_alloc & (1ULL << crq->tag)) == 0)) return -EINVAL; /* tried to clear a tag that was not active */ @@ -791,7 +815,7 @@ static inline void carm_end_rq(struct carm_host *host, struct carm_request *crq, int is_ok) { carm_end_request_queued(host, crq, is_ok); - if (CARM_MAX_Q == 1) + if (max_queue == 1) carm_round_robin(host); else if ((host->n_msgs <= CARM_MSG_LOW_WATER) && (host->hw_sg_used <= CARM_SG_LOW_WATER)) { -- GitLab From cf482935c6abe5245e481213c6e6df808c976f56 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 00:19:33 -0400 Subject: [PATCH 0393/1519] libata: turn on block layer clustering --- include/linux/libata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 0e214f8c8f9f..634b5aa0a615 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -91,7 +91,7 @@ enum { ATA_SHT_EMULATED = 1, ATA_SHT_CMD_PER_LUN = 1, ATA_SHT_THIS_ID = -1, - ATA_SHT_USE_CLUSTERING = 0, + ATA_SHT_USE_CLUSTERING = 1, /* struct ata_device stuff */ ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */ -- GitLab From 7bbaa75452c77cbaa016b987765c5d6c8b744587 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 01:33:18 -0400 Subject: [PATCH 0394/1519] drivers/block/sx8: kill unused variable --- drivers/block/sx8.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index b5f612679a31..1ded3b433459 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -242,7 +242,6 @@ static const char *state_name[] = { struct carm_port { unsigned int port_no; - unsigned int n_queued; struct gendisk *disk; struct carm_host *host; -- GitLab From c8e0ca683dfea7242ff29814561dfe761945e5b3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sat, 22 Oct 2005 09:43:29 -0700 Subject: [PATCH 0395/1519] [IB] mthca: Always re-arm EQs in mthca_tavor_interrupt() We should always re-arm an event queue's interrupt in mthca_tavor_interrupt() if the corresponding bit is set in the event cause register (ECR), even if we didn't find any entries in the EQ. If we don't, then there's a window where we miss an EQ entry and then get stuck because we don't get another EQ event. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_eq.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index c81fa8e975ef..8dfafda5ed24 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -396,20 +396,21 @@ static irqreturn_t mthca_tavor_interrupt(int irq, void *dev_ptr, struct pt_regs writel(dev->eq_table.clr_mask, dev->eq_table.clr_int); ecr = readl(dev->eq_regs.tavor.ecr_base + 4); - if (ecr) { - writel(ecr, dev->eq_regs.tavor.ecr_base + - MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4); + if (!ecr) + return IRQ_NONE; - for (i = 0; i < MTHCA_NUM_EQ; ++i) - if (ecr & dev->eq_table.eq[i].eqn_mask && - mthca_eq_int(dev, &dev->eq_table.eq[i])) { + writel(ecr, dev->eq_regs.tavor.ecr_base + + MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4); + + for (i = 0; i < MTHCA_NUM_EQ; ++i) + if (ecr & dev->eq_table.eq[i].eqn_mask) { + if (mthca_eq_int(dev, &dev->eq_table.eq[i])) tavor_set_eq_ci(dev, &dev->eq_table.eq[i], dev->eq_table.eq[i].cons_index); - tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn); - } - } + tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn); + } - return IRQ_RETVAL(ecr); + return IRQ_HANDLED; } static irqreturn_t mthca_tavor_msi_x_interrupt(int irq, void *eq_ptr, -- GitLab From 057ace5e79da9ebf2aa82833cfea825533ac06fb Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 22 Oct 2005 14:27:05 -0400 Subject: [PATCH 0396/1519] libata: const-ification bombing run Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect. --- drivers/scsi/ahci.c | 2 +- drivers/scsi/ata_piix.c | 4 +-- drivers/scsi/libata-core.c | 68 ++++++++++++++++++------------------- drivers/scsi/libata-scsi.c | 24 ++++++------- drivers/scsi/libata.h | 2 +- drivers/scsi/pdc_adma.c | 2 +- drivers/scsi/sata_mv.c | 2 +- drivers/scsi/sata_nv.c | 2 +- drivers/scsi/sata_promise.c | 12 +++---- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_sil.c | 2 +- drivers/scsi/sata_sil24.c | 2 +- drivers/scsi/sata_sis.c | 2 +- drivers/scsi/sata_svw.c | 4 +-- drivers/scsi/sata_sx4.c | 10 +++--- drivers/scsi/sata_uli.c | 2 +- drivers/scsi/sata_via.c | 2 +- drivers/scsi/sata_vsc.c | 4 +-- include/linux/ata.h | 6 ++-- include/linux/libata.h | 32 ++++++++--------- 20 files changed, 93 insertions(+), 93 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index cfa22e4ee547..fe8187d6f58b 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -216,7 +216,7 @@ static Scsi_Host_Template ahci_sht = { .ordered_flush = 1, }; -static struct ata_port_operations ahci_ops = { +static const struct ata_port_operations ahci_ops = { .port_disable = ata_port_disable, .check_status = ahci_check_status, diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index d71cef767cec..be021478f416 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -147,7 +147,7 @@ static Scsi_Host_Template piix_sht = { .ordered_flush = 1, }; -static struct ata_port_operations piix_pata_ops = { +static const struct ata_port_operations piix_pata_ops = { .port_disable = ata_port_disable, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, @@ -177,7 +177,7 @@ static struct ata_port_operations piix_pata_ops = { .host_stop = ata_host_stop, }; -static struct ata_port_operations piix_sata_ops = { +static const struct ata_port_operations piix_sata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9269fd9b814f..d55f12dacfcb 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -67,9 +67,9 @@ static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); -static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift); +static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift); static int fgb(u32 bitmap); -static int ata_choose_xfer_mode(struct ata_port *ap, +static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); static void __ata_qc_complete(struct ata_queued_cmd *qc); @@ -97,7 +97,7 @@ MODULE_VERSION(DRV_VERSION); * Inherited from caller. */ -static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -155,7 +155,7 @@ static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf) * Inherited from caller. */ -static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -224,7 +224,7 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) * LOCKING: * Inherited from caller. */ -void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) ata_tf_load_mmio(ap, tf); @@ -244,7 +244,7 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); @@ -265,7 +265,7 @@ static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); @@ -285,7 +285,7 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) * LOCKING: * spin_lock_irqsave(host_set lock) */ -void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) ata_exec_command_mmio(ap, tf); @@ -305,7 +305,7 @@ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) * Obtains host_set lock. */ -static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf) +static inline void ata_exec(struct ata_port *ap, const struct ata_taskfile *tf) { unsigned long flags; @@ -328,7 +328,7 @@ static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf) * Obtains host_set lock. */ -static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_to_host(struct ata_port *ap, const struct ata_taskfile *tf) { ap->ops->tf_load(ap, tf); @@ -348,7 +348,7 @@ static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) +void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf) { ap->ops->tf_load(ap, tf); ap->ops->exec_command(ap, tf); @@ -558,7 +558,7 @@ u8 ata_chk_err(struct ata_port *ap) * Inherited from caller. */ -void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp) +void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) { fis[0] = 0x27; /* Register - Host to Device FIS */ fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, @@ -599,7 +599,7 @@ void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp) * Inherited from caller. */ -void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) +void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) { tf->command = fis[2]; /* status */ tf->feature = fis[3]; /* error */ @@ -845,7 +845,7 @@ static unsigned int ata_devchk(struct ata_port *ap, * the event of failure. */ -unsigned int ata_dev_classify(struct ata_taskfile *tf) +unsigned int ata_dev_classify(const struct ata_taskfile *tf) { /* Apple's open source Darwin code hints that some devices only * put a proper signature into the LBA mid/high registers, @@ -937,7 +937,7 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) * caller. */ -void ata_dev_id_string(u16 *id, unsigned char *s, +void ata_dev_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len) { unsigned int c; @@ -1054,7 +1054,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, * caller. */ -static inline void ata_dump_id(struct ata_device *dev) +static inline void ata_dump_id(const struct ata_device *dev) { DPRINTK("49==0x%04x " "53==0x%04x " @@ -1089,7 +1089,7 @@ static inline void ata_dump_id(struct ata_device *dev) * FIXME: pre IDE drive timing (do we care ?). */ -static unsigned int ata_pio_modes(struct ata_device *adev) +static unsigned int ata_pio_modes(const struct ata_device *adev) { u16 modes; @@ -1352,7 +1352,7 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) } -static inline u8 ata_dev_knobble(struct ata_port *ap) +static inline u8 ata_dev_knobble(const struct ata_port *ap) { return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); } @@ -1684,7 +1684,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, return 0; } -static struct { +static const struct { unsigned int shift; u8 base; } xfer_mode_classes[] = { @@ -2093,7 +2093,8 @@ void ata_bus_reset(struct ata_port *ap) DPRINTK("EXIT\n"); } -static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev) +static void ata_pr_blacklisted(const struct ata_port *ap, + const struct ata_device *dev) { printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n", ap->id, dev->devno); @@ -2131,7 +2132,7 @@ static const char * ata_dma_blacklist [] = { "_NEC DV5800A", }; -static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev) +static int ata_dma_blacklisted(const struct ata_device *dev) { unsigned char model_num[40]; char *s; @@ -2156,9 +2157,9 @@ static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev) return 0; } -static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) +static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift) { - struct ata_device *master, *slave; + const struct ata_device *master, *slave; unsigned int mask; master = &ap->device[0]; @@ -2170,14 +2171,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) mask = ap->udma_mask; if (ata_dev_present(master)) { mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(ap, master)) { + if (ata_dma_blacklisted(master)) { mask = 0; ata_pr_blacklisted(ap, master); } } if (ata_dev_present(slave)) { mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(ap, slave)) { + if (ata_dma_blacklisted(slave)) { mask = 0; ata_pr_blacklisted(ap, slave); } @@ -2187,14 +2188,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) mask = ap->mwdma_mask; if (ata_dev_present(master)) { mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(ap, master)) { + if (ata_dma_blacklisted(master)) { mask = 0; ata_pr_blacklisted(ap, master); } } if (ata_dev_present(slave)) { mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(ap, slave)) { + if (ata_dma_blacklisted(slave)) { mask = 0; ata_pr_blacklisted(ap, slave); } @@ -2258,7 +2259,7 @@ static int fgb(u32 bitmap) * Zero on success, negative on error. */ -static int ata_choose_xfer_mode(struct ata_port *ap, +static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out) { @@ -4144,7 +4145,7 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, struct ata_host_set *host_set, - struct ata_probe_ent *ent, unsigned int port_no) + const struct ata_probe_ent *ent, unsigned int port_no) { unsigned int i; @@ -4203,7 +4204,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * */ -static struct ata_port * ata_host_add(struct ata_probe_ent *ent, +static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, struct ata_host_set *host_set, unsigned int port_no) { @@ -4251,7 +4252,7 @@ static struct ata_port * ata_host_add(struct ata_probe_ent *ent, * */ -int ata_device_add(struct ata_probe_ent *ent) +int ata_device_add(const struct ata_probe_ent *ent) { unsigned int count = 0, i; struct device *dev = ent->dev; @@ -4470,7 +4471,7 @@ void ata_std_ports(struct ata_ioports *ioaddr) } static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) { struct ata_probe_ent *probe_ent; @@ -4570,7 +4571,6 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, stru if (!probe_ent) return NULL; - probe_ent->legacy_mode = 1; probe_ent->n_ports = 1; probe_ent->hard_port_no = port_num; @@ -4783,7 +4783,7 @@ void ata_pci_remove_one (struct pci_dev *pdev) } /* move to PCI subsystem */ -int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) +int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) { unsigned long tmp = 0; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 90bf22204668..58858886d751 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -44,9 +44,9 @@ #include "libata.h" -typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd); +typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, @@ -418,7 +418,7 @@ int ata_scsi_error(struct Scsi_Host *host) */ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, - u8 *scsicmd) + const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; @@ -485,7 +485,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; @@ -512,7 +512,7 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) * @plen: the transfer length */ -static void scsi_6_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; @@ -539,7 +539,7 @@ static void scsi_6_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) * @plen: the transfer length */ -static void scsi_10_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; @@ -569,7 +569,7 @@ static void scsi_10_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) * @plen: the transfer length */ -static void scsi_16_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; @@ -608,7 +608,7 @@ static void scsi_16_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; @@ -734,7 +734,7 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) * Zero on success, non-zero on error. */ -static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; @@ -1688,7 +1688,7 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) * Zero on success, non-zero on failure. */ -static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) +static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; @@ -1757,7 +1757,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) */ static struct ata_device * -ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev) +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) { struct ata_device *dev; @@ -1914,7 +1914,7 @@ void ata_scsi_simulate(u16 *id, void (*done)(struct scsi_cmnd *)) { struct ata_scsi_args args; - u8 *scsicmd = cmd->cmnd; + const u8 *scsicmd = cmd->cmnd; args.id = id; args.cmd = cmd; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 67d752ca8ae2..3d60190584ba 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -48,7 +48,7 @@ extern int ata_qc_issue(struct ata_queued_cmd *qc); extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); -extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 53b8db4be1a9..9820f272f889 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -158,7 +158,7 @@ static Scsi_Host_Template adma_ata_sht = { .bios_param = ata_std_bios_param, }; -static struct ata_port_operations adma_ata_ops = { +static const struct ata_port_operations adma_ata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 9b6213928f7a..422e0b6f603a 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -290,7 +290,7 @@ static Scsi_Host_Template mv_sht = { .ordered_flush = 1, }; -static struct ata_port_operations mv_ops = { +static const struct ata_port_operations mv_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 8866530bc491..1a56d6c79ddd 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -238,7 +238,7 @@ static Scsi_Host_Template nv_sht = { .ordered_flush = 1, }; -static struct ata_port_operations nv_ops = { +static const struct ata_port_operations nv_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 9bf8cbd29901..eee93b0016df 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -87,8 +87,8 @@ static void pdc_port_stop(struct ata_port *ap); static void pdc_pata_phy_reset(struct ata_port *ap); static void pdc_sata_phy_reset(struct ata_port *ap); static void pdc_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc_irq_clear(struct ata_port *ap); static int pdc_qc_issue_prot(struct ata_queued_cmd *qc); @@ -113,7 +113,7 @@ static Scsi_Host_Template pdc_ata_sht = { .ordered_flush = 1, }; -static struct ata_port_operations pdc_sata_ops = { +static const struct ata_port_operations pdc_sata_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -136,7 +136,7 @@ static struct ata_port_operations pdc_sata_ops = { .host_stop = ata_pci_host_stop, }; -static struct ata_port_operations pdc_pata_ops = { +static const struct ata_port_operations pdc_pata_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -546,7 +546,7 @@ static int pdc_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); @@ -554,7 +554,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) } -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index e1c1dae27c52..250dafa6bc36 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -147,7 +147,7 @@ static Scsi_Host_Template qs_ata_sht = { .bios_param = ata_std_bios_param, }; -static struct ata_port_operations qs_ata_ops = { +static const struct ata_port_operations qs_ata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index f6f0184e1ac8..3a056173fb95 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -150,7 +150,7 @@ static Scsi_Host_Template sil_sht = { .ordered_flush = 1, }; -static struct ata_port_operations sil_ops = { +static const struct ata_port_operations sil_ops = { .port_disable = ata_port_disable, .dev_config = sil_dev_config, .tf_load = ata_tf_load, diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 19857814d69f..32d730bd5bb6 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -275,7 +275,7 @@ static Scsi_Host_Template sil24_sht = { .ordered_flush = 1, /* NCQ not supported yet */ }; -static struct ata_port_operations sil24_ops = { +static const struct ata_port_operations sil24_ops = { .port_disable = ata_port_disable, .check_status = sil24_check_status, diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 0761a3234fcf..057f7b98b6c4 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -102,7 +102,7 @@ static Scsi_Host_Template sis_sht = { .ordered_flush = 1, }; -static struct ata_port_operations sis_ops = { +static const struct ata_port_operations sis_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index d89d968bedac..e0f9570bc6dd 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -102,7 +102,7 @@ static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, } -static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -297,7 +297,7 @@ static Scsi_Host_Template k2_sata_sht = { }; -static struct ata_port_operations k2_sata_ops = { +static const struct ata_port_operations k2_sata_ops = { .port_disable = ata_port_disable, .tf_load = k2_sata_tf_load, .tf_read = k2_sata_tf_read, diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index d6d350a0b5e9..af08f4f650c1 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -157,8 +157,8 @@ static void pdc_20621_phy_reset (struct ata_port *ap); static int pdc_port_start(struct ata_port *ap); static void pdc_port_stop(struct ata_port *ap); static void pdc20621_qc_prep(struct ata_queued_cmd *qc); -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf); -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf); +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf); static void pdc20621_host_stop(struct ata_host_set *host_set); static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe); static int pdc20621_detect_dimm(struct ata_probe_ent *pe); @@ -196,7 +196,7 @@ static Scsi_Host_Template pdc_sata_sht = { .ordered_flush = 1, }; -static struct ata_port_operations pdc_20621_ops = { +static const struct ata_port_operations pdc_20621_ops = { .port_disable = ata_port_disable, .tf_load = pdc_tf_load_mmio, .tf_read = ata_tf_read, @@ -899,7 +899,7 @@ static void pdc_eng_timeout(struct ata_port *ap) DPRINTK("EXIT\n"); } -static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); @@ -907,7 +907,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) } -static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON (tf->protocol == ATA_PROT_DMA || tf->protocol == ATA_PROT_NODATA); diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 9c06f2abe7f7..d68dc7d3422c 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -90,7 +90,7 @@ static Scsi_Host_Template uli_sht = { .ordered_flush = 1, }; -static struct ata_port_operations uli_ops = { +static const struct ata_port_operations uli_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 565872479b9a..80e291a909a9 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -109,7 +109,7 @@ static Scsi_Host_Template svia_sht = { .ordered_flush = 1, }; -static struct ata_port_operations svia_sata_ops = { +static const struct ata_port_operations svia_sata_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 877b9fda3965..5af05fdf8544 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -115,7 +115,7 @@ static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl) } -static void vsc_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -231,7 +231,7 @@ static Scsi_Host_Template vsc_sata_sht = { }; -static struct ata_port_operations vsc_sata_ops = { +static const struct ata_port_operations vsc_sata_ops = { .port_disable = ata_port_disable, .tf_load = vsc_sata_tf_load, .tf_read = vsc_sata_tf_read, diff --git a/include/linux/ata.h b/include/linux/ata.h index 33276d1d05d2..d2873b732bb1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -261,7 +261,7 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) -static inline int ata_id_current_chs_valid(u16 *id) +static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command has not been issued to the device then the values of @@ -273,7 +273,7 @@ static inline int ata_id_current_chs_valid(u16 *id) id[56]; /* sectors in current translation */ } -static inline int atapi_cdb_len(u16 *dev_id) +static inline int atapi_cdb_len(const u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; switch (tmp) { @@ -283,7 +283,7 @@ static inline int atapi_cdb_len(u16 *dev_id) } } -static inline int is_atapi_taskfile(struct ata_taskfile *tf) +static inline int is_atapi_taskfile(const struct ata_taskfile *tf) { return (tf->protocol == ATA_PROT_ATAPI) || (tf->protocol == ATA_PROT_ATAPI_NODATA) || diff --git a/include/linux/libata.h b/include/linux/libata.h index 634b5aa0a615..00a8a5738858 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -202,7 +202,7 @@ struct ata_ioports { struct ata_probe_ent { struct list_head node; struct device *dev; - struct ata_port_operations *port_ops; + const struct ata_port_operations *port_ops; Scsi_Host_Template *sht; struct ata_ioports port[ATA_MAX_PORTS]; unsigned int n_ports; @@ -225,7 +225,7 @@ struct ata_host_set { void __iomem *mmio_base; unsigned int n_ports; void *private_data; - struct ata_port_operations *ops; + const struct ata_port_operations *ops; struct ata_port * ports[0]; }; @@ -294,7 +294,7 @@ struct ata_device { struct ata_port { struct Scsi_Host *host; /* our co-allocated scsi host */ - struct ata_port_operations *ops; + const struct ata_port_operations *ops; unsigned long flags; /* ATA_FLAG_xxx */ unsigned int id; /* unique id req'd by scsi midlyr */ unsigned int port_no; /* unique port #; from zero */ @@ -341,10 +341,10 @@ struct ata_port_operations { void (*set_piomode) (struct ata_port *, struct ata_device *); void (*set_dmamode) (struct ata_port *, struct ata_device *); - void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); + void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf); void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); - void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); + void (*exec_command)(struct ata_port *ap, const struct ata_taskfile *tf); u8 (*check_status)(struct ata_port *ap); u8 (*check_altstatus)(struct ata_port *ap); u8 (*check_err)(struct ata_port *ap); @@ -385,7 +385,7 @@ struct ata_port_info { unsigned long pio_mask; unsigned long mwdma_mask; unsigned long udma_mask; - struct ata_port_operations *port_ops; + const struct ata_port_operations *port_ops; }; struct ata_timing { @@ -413,7 +413,7 @@ extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_i unsigned int n_ports); extern void ata_pci_remove_one (struct pci_dev *pdev); #endif /* CONFIG_PCI */ -extern int ata_device_add(struct ata_probe_ent *ent); +extern int ata_device_add(const struct ata_probe_ent *ent); extern void ata_host_set_remove(struct ata_host_set *host_set); extern int ata_scsi_detect(Scsi_Host_Template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); @@ -426,16 +426,16 @@ extern int ata_ratelimit(void); /* * Default driver ops implementations */ -extern void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf); -extern void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp); -extern void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf); +extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp); +extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf); extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device); extern void ata_std_dev_select (struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); extern u8 ata_altstatus(struct ata_port *ap); extern u8 ata_chk_err(struct ata_port *ap); -extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf); +extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); extern void ata_host_stop (struct ata_host_set *host_set); @@ -446,8 +446,8 @@ extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen); extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem); -extern unsigned int ata_dev_classify(struct ata_taskfile *tf); -extern void ata_dev_id_string(u16 *id, unsigned char *s, +extern unsigned int ata_dev_classify(const struct ata_taskfile *tf); +extern void ata_dev_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_dev_config(struct ata_port *ap, unsigned int i); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); @@ -502,7 +502,7 @@ struct pci_bits { extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); -extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); +extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); #endif /* CONFIG_PCI */ @@ -512,7 +512,7 @@ static inline unsigned int ata_tag_valid(unsigned int tag) return (tag < ATA_MAX_QUEUE) ? 1 : 0; } -static inline unsigned int ata_dev_present(struct ata_device *dev) +static inline unsigned int ata_dev_present(const struct ata_device *dev) { return ((dev->class == ATA_DEV_ATA) || (dev->class == ATA_DEV_ATAPI)); @@ -711,7 +711,7 @@ static inline unsigned int sata_dev_present(struct ata_port *ap) return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0; } -static inline int ata_try_flush_cache(struct ata_device *dev) +static inline int ata_try_flush_cache(const struct ata_device *dev) { return ata_id_wcache_enabled(dev->id) || ata_id_has_flush(dev->id) || -- GitLab From 5d7edb3c1a01310725d86f0d83fb3be45685dc82 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 24 Oct 2005 10:53:25 -0700 Subject: [PATCH 0397/1519] [IB] Add idr_destroy() calls on module unload Add idr_destroy() calls to the module_exit() functions of the four IB driver modules that use idrs, so we don't leak idr_layer_cache objects when these modules are unloaded. Signed-off-by: Roland Dreier --- drivers/infiniband/core/cm.c | 1 + drivers/infiniband/core/sa_query.c | 1 + drivers/infiniband/core/ucm.c | 1 + drivers/infiniband/core/uverbs_main.c | 7 +++++++ 4 files changed, 10 insertions(+) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 54db6d4831f1..151ef83cc14f 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3323,6 +3323,7 @@ static void __exit ib_cm_cleanup(void) flush_workqueue(cm.wq); destroy_workqueue(cm.wq); ib_unregister_client(&cm_client); + idr_destroy(&cm.local_id_table); } module_init(ib_cm_init); diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 262618210c1c..e215cf0478d6 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -975,6 +975,7 @@ static int __init ib_sa_init(void) static void __exit ib_sa_cleanup(void) { ib_unregister_client(&sa_client); + idr_destroy(&query_idr); } module_init(ib_sa_init); diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index d0f0b0a2edd3..5a6ba4030d44 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -1320,6 +1320,7 @@ static void __exit ib_ucm_cleanup(void) class_destroy(ib_ucm_class); cdev_del(&ib_ucm_cdev); unregister_chrdev_region(IB_UCM_DEV, 1); + idr_destroy(&ctx_id_table); } module_init(ib_ucm_init); diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 12511808de21..add45f7faa5b 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -762,6 +762,13 @@ static void __exit ib_uverbs_cleanup(void) unregister_filesystem(&uverbs_event_fs); class_unregister(&uverbs_class); unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES); + idr_destroy(&ib_uverbs_pd_idr); + idr_destroy(&ib_uverbs_mr_idr); + idr_destroy(&ib_uverbs_mw_idr); + idr_destroy(&ib_uverbs_ah_idr); + idr_destroy(&ib_uverbs_cq_idr); + idr_destroy(&ib_uverbs_qp_idr); + idr_destroy(&ib_uverbs_srq_idr); } module_init(ib_uverbs_init); -- GitLab From ae7971a7706384ca373fb7e212fe195698e6c5a1 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 24 Oct 2005 12:33:56 -0700 Subject: [PATCH 0398/1519] [IB] CM: Fix initialization of QP attributes for UC QPs. Fix cm_init_qp_init_attr(), cm_init_qp_rtr_attr() and cm_init_qp_rts_attr() so that they correctly handle the differences between UC and RC QPs. This fixes problems with setting up UC QPs through the CM. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/cm.c | 38 +++++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 14 deletions(-) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 3fe6f4754fa8..389fecbaf662 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -135,6 +135,7 @@ struct cm_id_private { __be64 tid; __be32 local_qpn; __be32 remote_qpn; + enum ib_qp_type qp_type; __be32 sq_psn; __be32 rq_psn; int timeout_ms; @@ -926,6 +927,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, cm_id_priv->responder_resources = param->responder_resources; cm_id_priv->retry_count = param->retry_count; cm_id_priv->path_mtu = param->primary_path->mtu; + cm_id_priv->qp_type = param->qp_type; ret = cm_alloc_msg(cm_id_priv, &cm_id_priv->msg); if (ret) @@ -1320,6 +1322,7 @@ static int cm_req_handler(struct cm_work *work) cm_req_get_primary_local_ack_timeout(req_msg); cm_id_priv->retry_count = cm_req_get_retry_count(req_msg); cm_id_priv->rnr_retry_count = cm_req_get_rnr_retry_count(req_msg); + cm_id_priv->qp_type = cm_req_get_qp_type(req_msg); cm_format_req_event(work, cm_id_priv, &listen_cm_id_priv->id); cm_process_work(cm_id_priv, work); @@ -3079,10 +3082,10 @@ static int cm_init_qp_init_attr(struct cm_id_private *cm_id_priv, case IB_CM_ESTABLISHED: *qp_attr_mask = IB_QP_STATE | IB_QP_ACCESS_FLAGS | IB_QP_PKEY_INDEX | IB_QP_PORT; - qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE; + qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE | + IB_ACCESS_REMOTE_WRITE; if (cm_id_priv->responder_resources) - qp_attr->qp_access_flags |= IB_ACCESS_REMOTE_WRITE | - IB_ACCESS_REMOTE_READ; + qp_attr->qp_access_flags |= IB_ACCESS_REMOTE_READ; qp_attr->pkey_index = cm_id_priv->av.pkey_index; qp_attr->port_num = cm_id_priv->av.port->port_num; ret = 0; @@ -3112,14 +3115,18 @@ static int cm_init_qp_rtr_attr(struct cm_id_private *cm_id_priv, case IB_CM_MRA_REP_RCVD: case IB_CM_ESTABLISHED: *qp_attr_mask = IB_QP_STATE | IB_QP_AV | IB_QP_PATH_MTU | - IB_QP_DEST_QPN | IB_QP_RQ_PSN | - IB_QP_MAX_DEST_RD_ATOMIC | IB_QP_MIN_RNR_TIMER; + IB_QP_DEST_QPN | IB_QP_RQ_PSN; qp_attr->ah_attr = cm_id_priv->av.ah_attr; qp_attr->path_mtu = cm_id_priv->path_mtu; qp_attr->dest_qp_num = be32_to_cpu(cm_id_priv->remote_qpn); qp_attr->rq_psn = be32_to_cpu(cm_id_priv->rq_psn); - qp_attr->max_dest_rd_atomic = cm_id_priv->responder_resources; - qp_attr->min_rnr_timer = 0; + if (cm_id_priv->qp_type == IB_QPT_RC) { + *qp_attr_mask |= IB_QP_MAX_DEST_RD_ATOMIC | + IB_QP_MIN_RNR_TIMER; + qp_attr->max_dest_rd_atomic = + cm_id_priv->responder_resources; + qp_attr->min_rnr_timer = 0; + } if (cm_id_priv->alt_av.ah_attr.dlid) { *qp_attr_mask |= IB_QP_ALT_PATH; qp_attr->alt_ah_attr = cm_id_priv->alt_av.ah_attr; @@ -3148,14 +3155,17 @@ static int cm_init_qp_rts_attr(struct cm_id_private *cm_id_priv, case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: case IB_CM_ESTABLISHED: - *qp_attr_mask = IB_QP_STATE | IB_QP_TIMEOUT | IB_QP_RETRY_CNT | - IB_QP_RNR_RETRY | IB_QP_SQ_PSN | - IB_QP_MAX_QP_RD_ATOMIC; - qp_attr->timeout = cm_id_priv->local_ack_timeout; - qp_attr->retry_cnt = cm_id_priv->retry_count; - qp_attr->rnr_retry = cm_id_priv->rnr_retry_count; + *qp_attr_mask = IB_QP_STATE | IB_QP_SQ_PSN; qp_attr->sq_psn = be32_to_cpu(cm_id_priv->sq_psn); - qp_attr->max_rd_atomic = cm_id_priv->initiator_depth; + if (cm_id_priv->qp_type == IB_QPT_RC) { + *qp_attr_mask |= IB_QP_TIMEOUT | IB_QP_RETRY_CNT | + IB_QP_RNR_RETRY | + IB_QP_MAX_QP_RD_ATOMIC; + qp_attr->timeout = cm_id_priv->local_ack_timeout; + qp_attr->retry_cnt = cm_id_priv->retry_count; + qp_attr->rnr_retry = cm_id_priv->rnr_retry_count; + qp_attr->max_rd_atomic = cm_id_priv->initiator_depth; + } if (cm_id_priv->alt_av.ah_attr.dlid) { *qp_attr_mask |= IB_QP_PATH_MIG_STATE; qp_attr->path_mig_state = IB_MIG_REARM; -- GitLab From 6f0ef4fa57b9ba27d7b1c330bad041f1665501fe Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 25 Oct 2005 01:44:30 -0400 Subject: [PATCH 0399/1519] [PATCH] libata kernel-doc fixes Correct some function names in kernel-doc. Add some kernel-doc descriptions. Fix some typos. Remove a few blank lines. Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 36 ++++++++++++++---------------------- 1 file changed, 14 insertions(+), 22 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d55f12dacfcb..dcd3b5553cc8 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -87,7 +87,7 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); /** - * ata_tf_load - send taskfile registers to host controller + * ata_tf_load_pio - send taskfile registers to host controller * @ap: Port to which output is sent * @tf: ATA taskfile register set * @@ -2701,13 +2701,13 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) /** * ata_pio_poll - - * @ap: + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) * * RETURNS: - * + * timeout value to use */ static unsigned long ata_pio_poll(struct ata_port *ap) @@ -2748,8 +2748,8 @@ static unsigned long ata_pio_poll(struct ata_port *ap) } /** - * ata_pio_complete - - * @ap: + * ata_pio_complete - check if drive is busy or idle + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) @@ -2801,7 +2801,7 @@ static int ata_pio_complete (struct ata_port *ap) /** - * swap_buf_le16 - + * swap_buf_le16 - swap halves of 16-words in place * @buf: Buffer to swap * @buf_words: Number of 16-bit words in buffer. * @@ -2810,6 +2810,7 @@ static int ata_pio_complete (struct ata_port *ap) * vice-versa. * * LOCKING: + * Inherited from caller. */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { @@ -2832,7 +2833,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * * LOCKING: * Inherited from caller. - * */ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2878,7 +2878,6 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, * * LOCKING: * Inherited from caller. - * */ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2918,7 +2917,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, * * LOCKING: * Inherited from caller. - * */ static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -3071,7 +3069,6 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) * * LOCKING: * Inherited from caller. - * */ static void atapi_pio_bytes(struct ata_queued_cmd *qc) @@ -3107,8 +3104,8 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) } /** - * ata_pio_sector - - * @ap: + * ata_pio_block - start PIO on a block + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) @@ -3120,7 +3117,7 @@ static void ata_pio_block(struct ata_port *ap) u8 status; /* - * This is purely hueristic. This is a fast path. + * This is purely heuristic. This is a fast path. * Sometimes when we enter, BSY will be cleared in * a chk-status or two. If not, the drive is probably seeking * or something. Snooze for a couple msecs, then @@ -3440,7 +3437,6 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) - * */ void ata_qc_free(struct ata_queued_cmd *qc) { @@ -3460,7 +3456,6 @@ void ata_qc_free(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) - * */ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -3954,7 +3949,6 @@ inline unsigned int ata_host_intr (struct ata_port *ap, * * RETURNS: * IRQ_NONE or IRQ_HANDLED. - * */ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) @@ -4066,6 +4060,7 @@ static void atapi_packet_task(void *_data) * May be used as the port_start() entry in ata_port_operations. * * LOCKING: + * Inherited from caller. */ int ata_port_start (struct ata_port *ap) @@ -4091,6 +4086,7 @@ int ata_port_start (struct ata_port *ap) * May be used as the port_stop() entry in ata_port_operations. * * LOCKING: + * Inherited from caller. */ void ata_port_stop (struct ata_port *ap) @@ -4113,6 +4109,7 @@ void ata_host_stop (struct ata_host_set *host_set) * @do_unregister: 1 if we fully unregister, 0 to just stop the port * * LOCKING: + * Inherited from caller. */ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) @@ -4140,7 +4137,6 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * * LOCKING: * Inherited from caller. - * */ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, @@ -4201,7 +4197,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * * RETURNS: * New ata_port on success, for NULL on error. - * */ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, @@ -4249,7 +4244,6 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, * * RETURNS: * Number of ports registered. Zero on error (no ports registered). - * */ int ata_device_add(const struct ata_probe_ent *ent) @@ -4381,7 +4375,6 @@ int ata_device_add(const struct ata_probe_ent *ent) * Inherited from calling layer (may sleep). */ - void ata_host_set_remove(struct ata_host_set *host_set) { struct ata_port *ap; @@ -4614,7 +4607,6 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, stru * * RETURNS: * Zero on success, negative on errno-based value on error. - * */ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, @@ -4762,7 +4754,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, * @pdev: PCI device that was removed * * PCI layer indicates to libata via this hook that - * hot-unplug or module unload event has occured. + * hot-unplug or module unload event has occurred. * Handle this by unregistering all objects associated * with this PCI device. Free those objects. Then finally * release PCI resources and disable device. -- GitLab From 34816ad98efe4d47ffd858a0345321f9d85d9420 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Tue, 25 Oct 2005 10:51:39 -0700 Subject: [PATCH 0400/1519] [IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/agent.c | 293 ++++++------------------ drivers/infiniband/core/agent.h | 13 +- drivers/infiniband/core/agent_priv.h | 62 ----- drivers/infiniband/core/cm.c | 137 ++++------- drivers/infiniband/core/mad.c | 288 ++++++++++------------- drivers/infiniband/core/mad_priv.h | 8 +- drivers/infiniband/core/mad_rmpp.c | 87 ++++--- drivers/infiniband/core/mad_rmpp.h | 2 + drivers/infiniband/core/sa_query.c | 239 +++++++++---------- drivers/infiniband/core/smi.h | 2 + drivers/infiniband/core/user_mad.c | 47 ++-- drivers/infiniband/hw/mthca/mthca_mad.c | 72 +----- include/rdma/ib_mad.h | 66 +++--- include/rdma/ib_verbs.h | 3 - 14 files changed, 475 insertions(+), 844 deletions(-) delete mode 100644 drivers/infiniband/core/agent_priv.h diff --git a/drivers/infiniband/core/agent.c b/drivers/infiniband/core/agent.c index 5ac86f566dc0..0c3c6952faae 100644 --- a/drivers/infiniband/core/agent.c +++ b/drivers/infiniband/core/agent.c @@ -37,58 +37,41 @@ * $Id: agent.c 1389 2004-12-27 22:56:47Z roland $ */ -#include - -#include +#include "agent.h" +#include "smi.h" -#include +#define SPFX "ib_agent: " -#include "smi.h" -#include "agent_priv.h" -#include "mad_priv.h" -#include "agent.h" +struct ib_agent_port_private { + struct list_head port_list; + struct ib_mad_agent *agent[2]; +}; -spinlock_t ib_agent_port_list_lock; +static DEFINE_SPINLOCK(ib_agent_port_list_lock); static LIST_HEAD(ib_agent_port_list); -/* - * Caller must hold ib_agent_port_list_lock - */ -static inline struct ib_agent_port_private * -__ib_get_agent_port(struct ib_device *device, int port_num, - struct ib_mad_agent *mad_agent) +static struct ib_agent_port_private * +__ib_get_agent_port(struct ib_device *device, int port_num) { struct ib_agent_port_private *entry; - BUG_ON(!(!!device ^ !!mad_agent)); /* Exactly one MUST be (!NULL) */ - - if (device) { - list_for_each_entry(entry, &ib_agent_port_list, port_list) { - if (entry->smp_agent->device == device && - entry->port_num == port_num) - return entry; - } - } else { - list_for_each_entry(entry, &ib_agent_port_list, port_list) { - if ((entry->smp_agent == mad_agent) || - (entry->perf_mgmt_agent == mad_agent)) - return entry; - } + list_for_each_entry(entry, &ib_agent_port_list, port_list) { + if (entry->agent[0]->device == device && + entry->agent[0]->port_num == port_num) + return entry; } return NULL; } -static inline struct ib_agent_port_private * -ib_get_agent_port(struct ib_device *device, int port_num, - struct ib_mad_agent *mad_agent) +static struct ib_agent_port_private * +ib_get_agent_port(struct ib_device *device, int port_num) { struct ib_agent_port_private *entry; unsigned long flags; spin_lock_irqsave(&ib_agent_port_list_lock, flags); - entry = __ib_get_agent_port(device, port_num, mad_agent); + entry = __ib_get_agent_port(device, port_num); spin_unlock_irqrestore(&ib_agent_port_list_lock, flags); - return entry; } @@ -100,192 +83,76 @@ int smi_check_local_dr_smp(struct ib_smp *smp, if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) return 1; - port_priv = ib_get_agent_port(device, port_num, NULL); + + port_priv = ib_get_agent_port(device, port_num); if (!port_priv) { printk(KERN_DEBUG SPFX "smi_check_local_dr_smp %s port %d " - "not open\n", - device->name, port_num); + "not open\n", device->name, port_num); return 1; } - return smi_check_local_smp(port_priv->smp_agent, smp); + return smi_check_local_smp(port_priv->agent[0], smp); } -static int agent_mad_send(struct ib_mad_agent *mad_agent, - struct ib_agent_port_private *port_priv, - struct ib_mad_private *mad_priv, - struct ib_grh *grh, - struct ib_wc *wc) +int agent_send_response(struct ib_mad *mad, struct ib_grh *grh, + struct ib_wc *wc, struct ib_device *device, + int port_num, int qpn) { - struct ib_agent_send_wr *agent_send_wr; - struct ib_sge gather_list; - struct ib_send_wr send_wr; - struct ib_send_wr *bad_send_wr; - struct ib_ah_attr ah_attr; - unsigned long flags; - int ret = 1; - - agent_send_wr = kmalloc(sizeof(*agent_send_wr), GFP_KERNEL); - if (!agent_send_wr) - goto out; - agent_send_wr->mad = mad_priv; - - gather_list.addr = dma_map_single(mad_agent->device->dma_device, - &mad_priv->mad, - sizeof(mad_priv->mad), - DMA_TO_DEVICE); - gather_list.length = sizeof(mad_priv->mad); - gather_list.lkey = mad_agent->mr->lkey; - - send_wr.next = NULL; - send_wr.opcode = IB_WR_SEND; - send_wr.sg_list = &gather_list; - send_wr.num_sge = 1; - send_wr.wr.ud.remote_qpn = wc->src_qp; /* DQPN */ - send_wr.wr.ud.timeout_ms = 0; - send_wr.send_flags = IB_SEND_SIGNALED | IB_SEND_SOLICITED; + struct ib_agent_port_private *port_priv; + struct ib_mad_agent *agent; + struct ib_mad_send_buf *send_buf; + struct ib_ah *ah; + int ret; - ah_attr.dlid = wc->slid; - ah_attr.port_num = mad_agent->port_num; - ah_attr.src_path_bits = wc->dlid_path_bits; - ah_attr.sl = wc->sl; - ah_attr.static_rate = 0; - ah_attr.ah_flags = 0; /* No GRH */ - if (mad_priv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT) { - if (wc->wc_flags & IB_WC_GRH) { - ah_attr.ah_flags = IB_AH_GRH; - /* Should sgid be looked up ? */ - ah_attr.grh.sgid_index = 0; - ah_attr.grh.hop_limit = grh->hop_limit; - ah_attr.grh.flow_label = be32_to_cpu( - grh->version_tclass_flow) & 0xfffff; - ah_attr.grh.traffic_class = (be32_to_cpu( - grh->version_tclass_flow) >> 20) & 0xff; - memcpy(ah_attr.grh.dgid.raw, - grh->sgid.raw, - sizeof(ah_attr.grh.dgid)); - } + port_priv = ib_get_agent_port(device, port_num); + if (!port_priv) { + printk(KERN_ERR SPFX "Unable to find port agent\n"); + return -ENODEV; } - agent_send_wr->ah = ib_create_ah(mad_agent->qp->pd, &ah_attr); - if (IS_ERR(agent_send_wr->ah)) { - printk(KERN_ERR SPFX "No memory for address handle\n"); - kfree(agent_send_wr); - goto out; + agent = port_priv->agent[qpn]; + ah = ib_create_ah_from_wc(agent->qp->pd, wc, grh, port_num); + if (IS_ERR(ah)) { + ret = PTR_ERR(ah); + printk(KERN_ERR SPFX "ib_create_ah_from_wc error:%d\n", ret); + return ret; } - send_wr.wr.ud.ah = agent_send_wr->ah; - if (mad_priv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT) { - send_wr.wr.ud.pkey_index = wc->pkey_index; - send_wr.wr.ud.remote_qkey = IB_QP1_QKEY; - } else { /* for SMPs */ - send_wr.wr.ud.pkey_index = 0; - send_wr.wr.ud.remote_qkey = 0; + send_buf = ib_create_send_mad(agent, wc->src_qp, wc->pkey_index, 0, + IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, + GFP_KERNEL); + if (IS_ERR(send_buf)) { + ret = PTR_ERR(send_buf); + printk(KERN_ERR SPFX "ib_create_send_mad error:%d\n", ret); + goto err1; } - send_wr.wr.ud.mad_hdr = &mad_priv->mad.mad.mad_hdr; - send_wr.wr_id = (unsigned long)agent_send_wr; - pci_unmap_addr_set(agent_send_wr, mapping, gather_list.addr); - - /* Send */ - spin_lock_irqsave(&port_priv->send_list_lock, flags); - if (ib_post_send_mad(mad_agent, &send_wr, &bad_send_wr)) { - spin_unlock_irqrestore(&port_priv->send_list_lock, flags); - dma_unmap_single(mad_agent->device->dma_device, - pci_unmap_addr(agent_send_wr, mapping), - sizeof(mad_priv->mad), - DMA_TO_DEVICE); - ib_destroy_ah(agent_send_wr->ah); - kfree(agent_send_wr); - } else { - list_add_tail(&agent_send_wr->send_list, - &port_priv->send_posted_list); - spin_unlock_irqrestore(&port_priv->send_list_lock, flags); - ret = 0; + memcpy(send_buf->mad, mad, sizeof *mad); + send_buf->ah = ah; + if ((ret = ib_post_send_mad(send_buf, NULL))) { + printk(KERN_ERR SPFX "ib_post_send_mad error:%d\n", ret); + goto err2; } - -out: + return 0; +err2: + ib_free_send_mad(send_buf); +err1: + ib_destroy_ah(ah); return ret; } -int agent_send(struct ib_mad_private *mad, - struct ib_grh *grh, - struct ib_wc *wc, - struct ib_device *device, - int port_num) -{ - struct ib_agent_port_private *port_priv; - struct ib_mad_agent *mad_agent; - - port_priv = ib_get_agent_port(device, port_num, NULL); - if (!port_priv) { - printk(KERN_DEBUG SPFX "agent_send %s port %d not open\n", - device->name, port_num); - return 1; - } - - /* Get mad agent based on mgmt_class in MAD */ - switch (mad->mad.mad.mad_hdr.mgmt_class) { - case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE: - case IB_MGMT_CLASS_SUBN_LID_ROUTED: - mad_agent = port_priv->smp_agent; - break; - case IB_MGMT_CLASS_PERF_MGMT: - mad_agent = port_priv->perf_mgmt_agent; - break; - default: - return 1; - } - - return agent_mad_send(mad_agent, port_priv, mad, grh, wc); -} - static void agent_send_handler(struct ib_mad_agent *mad_agent, struct ib_mad_send_wc *mad_send_wc) { - struct ib_agent_port_private *port_priv; - struct ib_agent_send_wr *agent_send_wr; - unsigned long flags; - - /* Find matching MAD agent */ - port_priv = ib_get_agent_port(NULL, 0, mad_agent); - if (!port_priv) { - printk(KERN_ERR SPFX "agent_send_handler: no matching MAD " - "agent %p\n", mad_agent); - return; - } - - agent_send_wr = (struct ib_agent_send_wr *)(unsigned long)mad_send_wc->wr_id; - spin_lock_irqsave(&port_priv->send_list_lock, flags); - /* Remove completed send from posted send MAD list */ - list_del(&agent_send_wr->send_list); - spin_unlock_irqrestore(&port_priv->send_list_lock, flags); - - dma_unmap_single(mad_agent->device->dma_device, - pci_unmap_addr(agent_send_wr, mapping), - sizeof(agent_send_wr->mad->mad), - DMA_TO_DEVICE); - - ib_destroy_ah(agent_send_wr->ah); - - /* Release allocated memory */ - kmem_cache_free(ib_mad_cache, agent_send_wr->mad); - kfree(agent_send_wr); + ib_destroy_ah(mad_send_wc->send_buf->ah); + ib_free_send_mad(mad_send_wc->send_buf); } int ib_agent_port_open(struct ib_device *device, int port_num) { - int ret; struct ib_agent_port_private *port_priv; unsigned long flags; - - /* First, check if port already open for SMI */ - port_priv = ib_get_agent_port(device, port_num, NULL); - if (port_priv) { - printk(KERN_DEBUG SPFX "%s port %d already open\n", - device->name, port_num); - return 0; - } + int ret; /* Create new device info */ port_priv = kmalloc(sizeof *port_priv, GFP_KERNEL); @@ -294,32 +161,25 @@ int ib_agent_port_open(struct ib_device *device, int port_num) ret = -ENOMEM; goto error1; } - memset(port_priv, 0, sizeof *port_priv); - port_priv->port_num = port_num; - spin_lock_init(&port_priv->send_list_lock); - INIT_LIST_HEAD(&port_priv->send_posted_list); - /* Obtain send only MAD agent for SM class (SMI QP) */ - port_priv->smp_agent = ib_register_mad_agent(device, port_num, - IB_QPT_SMI, - NULL, 0, + /* Obtain send only MAD agent for SMI QP */ + port_priv->agent[0] = ib_register_mad_agent(device, port_num, + IB_QPT_SMI, NULL, 0, &agent_send_handler, - NULL, NULL); - - if (IS_ERR(port_priv->smp_agent)) { - ret = PTR_ERR(port_priv->smp_agent); + NULL, NULL); + if (IS_ERR(port_priv->agent[0])) { + ret = PTR_ERR(port_priv->agent[0]); goto error2; } - /* Obtain send only MAD agent for PerfMgmt class (GSI QP) */ - port_priv->perf_mgmt_agent = ib_register_mad_agent(device, port_num, - IB_QPT_GSI, - NULL, 0, - &agent_send_handler, - NULL, NULL); - if (IS_ERR(port_priv->perf_mgmt_agent)) { - ret = PTR_ERR(port_priv->perf_mgmt_agent); + /* Obtain send only MAD agent for GSI QP */ + port_priv->agent[1] = ib_register_mad_agent(device, port_num, + IB_QPT_GSI, NULL, 0, + &agent_send_handler, + NULL, NULL); + if (IS_ERR(port_priv->agent[1])) { + ret = PTR_ERR(port_priv->agent[1]); goto error3; } @@ -330,7 +190,7 @@ int ib_agent_port_open(struct ib_device *device, int port_num) return 0; error3: - ib_unregister_mad_agent(port_priv->smp_agent); + ib_unregister_mad_agent(port_priv->agent[0]); error2: kfree(port_priv); error1: @@ -343,7 +203,7 @@ int ib_agent_port_close(struct ib_device *device, int port_num) unsigned long flags; spin_lock_irqsave(&ib_agent_port_list_lock, flags); - port_priv = __ib_get_agent_port(device, port_num, NULL); + port_priv = __ib_get_agent_port(device, port_num); if (port_priv == NULL) { spin_unlock_irqrestore(&ib_agent_port_list_lock, flags); printk(KERN_ERR SPFX "Port %d not found\n", port_num); @@ -352,9 +212,8 @@ int ib_agent_port_close(struct ib_device *device, int port_num) list_del(&port_priv->port_list); spin_unlock_irqrestore(&ib_agent_port_list_lock, flags); - ib_unregister_mad_agent(port_priv->perf_mgmt_agent); - ib_unregister_mad_agent(port_priv->smp_agent); + ib_unregister_mad_agent(port_priv->agent[1]); + ib_unregister_mad_agent(port_priv->agent[0]); kfree(port_priv); - return 0; } diff --git a/drivers/infiniband/core/agent.h b/drivers/infiniband/core/agent.h index d9426842254a..c5f3cfec942a 100644 --- a/drivers/infiniband/core/agent.h +++ b/drivers/infiniband/core/agent.h @@ -39,17 +39,14 @@ #ifndef __AGENT_H_ #define __AGENT_H_ -extern spinlock_t ib_agent_port_list_lock; +#include -extern int ib_agent_port_open(struct ib_device *device, - int port_num); +extern int ib_agent_port_open(struct ib_device *device, int port_num); extern int ib_agent_port_close(struct ib_device *device, int port_num); -extern int agent_send(struct ib_mad_private *mad, - struct ib_grh *grh, - struct ib_wc *wc, - struct ib_device *device, - int port_num); +extern int agent_send_response(struct ib_mad *mad, struct ib_grh *grh, + struct ib_wc *wc, struct ib_device *device, + int port_num, int qpn); #endif /* __AGENT_H_ */ diff --git a/drivers/infiniband/core/agent_priv.h b/drivers/infiniband/core/agent_priv.h deleted file mode 100644 index 2ec6d7f1b7d0..000000000000 --- a/drivers/infiniband/core/agent_priv.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (c) 2004, 2005 Mellanox Technologies Ltd. All rights reserved. - * Copyright (c) 2004, 2005 Infinicon Corporation. All rights reserved. - * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved. - * Copyright (c) 2004, 2005 Topspin Corporation. All rights reserved. - * Copyright (c) 2004, 2005 Voltaire Corporation. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * $Id: agent_priv.h 1640 2005-01-24 22:39:02Z halr $ - */ - -#ifndef __IB_AGENT_PRIV_H__ -#define __IB_AGENT_PRIV_H__ - -#include - -#define SPFX "ib_agent: " - -struct ib_agent_send_wr { - struct list_head send_list; - struct ib_ah *ah; - struct ib_mad_private *mad; - DECLARE_PCI_UNMAP_ADDR(mapping) -}; - -struct ib_agent_port_private { - struct list_head port_list; - struct list_head send_posted_list; - spinlock_t send_list_lock; - int port_num; - struct ib_mad_agent *smp_agent; /* SM class */ - struct ib_mad_agent *perf_mgmt_agent; /* PerfMgmt class */ -}; - -#endif /* __IB_AGENT_PRIV_H__ */ diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 389fecbaf662..580c3a2bb102 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -176,8 +176,7 @@ static int cm_alloc_msg(struct cm_id_private *cm_id_priv, m = ib_create_send_mad(mad_agent, cm_id_priv->id.remote_cm_qpn, cm_id_priv->av.pkey_index, - ah, 0, sizeof(struct ib_mad_hdr), - sizeof(struct ib_mad)-sizeof(struct ib_mad_hdr), + 0, IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, GFP_ATOMIC); if (IS_ERR(m)) { ib_destroy_ah(ah); @@ -185,7 +184,8 @@ static int cm_alloc_msg(struct cm_id_private *cm_id_priv, } /* Timeout set by caller if response is expected. */ - m->send_wr.wr.ud.retries = cm_id_priv->max_cm_retries; + m->ah = ah; + m->retries = cm_id_priv->max_cm_retries; atomic_inc(&cm_id_priv->refcount); m->context[0] = cm_id_priv; @@ -206,20 +206,20 @@ static int cm_alloc_response_msg(struct cm_port *port, return PTR_ERR(ah); m = ib_create_send_mad(port->mad_agent, 1, mad_recv_wc->wc->pkey_index, - ah, 0, sizeof(struct ib_mad_hdr), - sizeof(struct ib_mad)-sizeof(struct ib_mad_hdr), + 0, IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, GFP_ATOMIC); if (IS_ERR(m)) { ib_destroy_ah(ah); return PTR_ERR(m); } + m->ah = ah; *msg = m; return 0; } static void cm_free_msg(struct ib_mad_send_buf *msg) { - ib_destroy_ah(msg->send_wr.wr.ud.ah); + ib_destroy_ah(msg->ah); if (msg->context[0]) cm_deref_id(msg->context[0]); ib_free_send_mad(msg); @@ -678,8 +678,7 @@ void ib_destroy_cm_id(struct ib_cm_id *cm_id) break; case IB_CM_SIDR_REQ_SENT: cm_id->state = IB_CM_IDLE; - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); spin_unlock_irqrestore(&cm_id_priv->lock, flags); break; case IB_CM_SIDR_REQ_RCVD: @@ -690,8 +689,7 @@ void ib_destroy_cm_id(struct ib_cm_id *cm_id) case IB_CM_MRA_REQ_RCVD: case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); /* Fall through */ case IB_CM_REQ_RCVD: case IB_CM_MRA_REQ_SENT: @@ -708,8 +706,7 @@ void ib_destroy_cm_id(struct ib_cm_id *cm_id) ib_send_cm_dreq(cm_id, NULL, 0); goto retest; case IB_CM_DREQ_SENT: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); cm_enter_timewait(cm_id_priv); spin_unlock_irqrestore(&cm_id_priv->lock, flags); break; @@ -883,7 +880,6 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, struct ib_cm_req_param *param) { struct cm_id_private *cm_id_priv; - struct ib_send_wr *bad_send_wr; struct cm_req_msg *req_msg; unsigned long flags; int ret; @@ -936,7 +932,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, req_msg = (struct cm_req_msg *) cm_id_priv->msg->mad; cm_format_req(req_msg, cm_id_priv, param); cm_id_priv->tid = req_msg->hdr.tid; - cm_id_priv->msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + cm_id_priv->msg->timeout_ms = cm_id_priv->timeout_ms; cm_id_priv->msg->context[1] = (void *) (unsigned long) IB_CM_REQ_SENT; cm_id_priv->local_qpn = cm_req_get_local_qpn(req_msg); @@ -945,8 +941,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, cm_req_get_primary_local_ack_timeout(req_msg); spin_lock_irqsave(&cm_id_priv->lock, flags); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &cm_id_priv->msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(cm_id_priv->msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); goto error2; @@ -969,7 +964,6 @@ static int cm_issue_rej(struct cm_port *port, void *ari, u8 ari_length) { struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; struct cm_rej_msg *rej_msg, *rcv_msg; int ret; @@ -992,7 +986,7 @@ static int cm_issue_rej(struct cm_port *port, memcpy(rej_msg->ari, ari, ari_length); } - ret = ib_post_send_mad(port->mad_agent, &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) cm_free_msg(msg); @@ -1172,7 +1166,6 @@ static void cm_dup_req_handler(struct cm_work *work, struct cm_id_private *cm_id_priv) { struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1201,8 +1194,7 @@ static void cm_dup_req_handler(struct cm_work *work, } spin_unlock_irqrestore(&cm_id_priv->lock, flags); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr, - &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto free; return; @@ -1367,7 +1359,6 @@ int ib_send_cm_rep(struct ib_cm_id *cm_id, struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; struct cm_rep_msg *rep_msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1389,11 +1380,10 @@ int ib_send_cm_rep(struct ib_cm_id *cm_id, rep_msg = (struct cm_rep_msg *) msg->mad; cm_format_rep(rep_msg, cm_id_priv, param); - msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + msg->timeout_ms = cm_id_priv->timeout_ms; msg->context[1] = (void *) (unsigned long) IB_CM_REP_SENT; - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -1431,7 +1421,6 @@ int ib_send_cm_rtu(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; void *data; int ret; @@ -1458,8 +1447,7 @@ int ib_send_cm_rtu(struct ib_cm_id *cm_id, cm_format_rtu((struct cm_rtu_msg *) msg->mad, cm_id_priv, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -1504,7 +1492,6 @@ static void cm_dup_rep_handler(struct cm_work *work) struct cm_id_private *cm_id_priv; struct cm_rep_msg *rep_msg; struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1532,8 +1519,7 @@ static void cm_dup_rep_handler(struct cm_work *work) goto unlock; spin_unlock_irqrestore(&cm_id_priv->lock, flags); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr, - &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto free; goto deref; @@ -1601,8 +1587,7 @@ static int cm_rep_handler(struct cm_work *work) /* todo: handle peer_to_peer */ - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -1636,8 +1621,7 @@ static int cm_establish_handler(struct cm_work *work) goto out; } - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -1676,8 +1660,7 @@ static int cm_rtu_handler(struct cm_work *work) } cm_id_priv->id.state = IB_CM_ESTABLISHED; - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -1714,7 +1697,6 @@ int ib_send_cm_dreq(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1736,11 +1718,10 @@ int ib_send_cm_dreq(struct ib_cm_id *cm_id, cm_format_dreq((struct cm_dreq_msg *) msg->mad, cm_id_priv, private_data, private_data_len); - msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + msg->timeout_ms = cm_id_priv->timeout_ms; msg->context[1] = (void *) (unsigned long) IB_CM_DREQ_SENT; - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { cm_enter_timewait(cm_id_priv); spin_unlock_irqrestore(&cm_id_priv->lock, flags); @@ -1774,7 +1755,6 @@ int ib_send_cm_drep(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; void *data; int ret; @@ -1804,8 +1784,7 @@ int ib_send_cm_drep(struct ib_cm_id *cm_id, cm_format_drep((struct cm_drep_msg *) msg->mad, cm_id_priv, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, &msg->send_wr, - &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -1822,7 +1801,6 @@ static int cm_dreq_handler(struct cm_work *work) struct cm_id_private *cm_id_priv; struct cm_dreq_msg *dreq_msg; struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1841,8 +1819,7 @@ static int cm_dreq_handler(struct cm_work *work) switch (cm_id_priv->id.state) { case IB_CM_REP_SENT: case IB_CM_DREQ_SENT: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); break; case IB_CM_ESTABLISHED: case IB_CM_MRA_REP_RCVD: @@ -1856,8 +1833,7 @@ static int cm_dreq_handler(struct cm_work *work) cm_id_priv->private_data_len); spin_unlock_irqrestore(&cm_id_priv->lock, flags); - if (ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr)) + if (ib_post_send_mad(msg, NULL)) cm_free_msg(msg); goto deref; default: @@ -1904,8 +1880,7 @@ static int cm_drep_handler(struct cm_work *work) } cm_enter_timewait(cm_id_priv); - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -1930,7 +1905,6 @@ int ib_send_cm_rej(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -1974,8 +1948,7 @@ int ib_send_cm_rej(struct ib_cm_id *cm_id, if (ret) goto out; - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) cm_free_msg(msg); @@ -2051,8 +2024,7 @@ static int cm_rej_handler(struct cm_work *work) case IB_CM_MRA_REQ_RCVD: case IB_CM_REP_SENT: case IB_CM_MRA_REP_RCVD: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); /* fall through */ case IB_CM_REQ_RCVD: case IB_CM_MRA_REQ_SENT: @@ -2062,8 +2034,7 @@ static int cm_rej_handler(struct cm_work *work) cm_reset_to_idle(cm_id_priv); break; case IB_CM_DREQ_SENT: - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); /* fall through */ case IB_CM_REP_RCVD: case IB_CM_MRA_REP_SENT: @@ -2098,7 +2069,6 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; void *data; unsigned long flags; int ret; @@ -2122,8 +2092,7 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id, cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv, CM_MSG_RESPONSE_REQ, service_timeout, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto error2; cm_id->state = IB_CM_MRA_REQ_SENT; @@ -2136,8 +2105,7 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id, cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv, CM_MSG_RESPONSE_REP, service_timeout, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto error2; cm_id->state = IB_CM_MRA_REP_SENT; @@ -2150,8 +2118,7 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id, cm_format_mra((struct cm_mra_msg *) msg->mad, cm_id_priv, CM_MSG_RESPONSE_OTHER, service_timeout, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) goto error2; cm_id->lap_state = IB_CM_MRA_LAP_SENT; @@ -2213,14 +2180,14 @@ static int cm_mra_handler(struct cm_work *work) case IB_CM_REQ_SENT: if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_REQ || ib_modify_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg, timeout)) + cm_id_priv->msg, timeout)) goto out; cm_id_priv->id.state = IB_CM_MRA_REQ_RCVD; break; case IB_CM_REP_SENT: if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_REP || ib_modify_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg, timeout)) + cm_id_priv->msg, timeout)) goto out; cm_id_priv->id.state = IB_CM_MRA_REP_RCVD; break; @@ -2228,7 +2195,7 @@ static int cm_mra_handler(struct cm_work *work) if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_OTHER || cm_id_priv->id.lap_state != IB_CM_LAP_SENT || ib_modify_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg, timeout)) + cm_id_priv->msg, timeout)) goto out; cm_id_priv->id.lap_state = IB_CM_MRA_LAP_RCVD; break; @@ -2291,7 +2258,6 @@ int ib_send_cm_lap(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2312,11 +2278,10 @@ int ib_send_cm_lap(struct ib_cm_id *cm_id, cm_format_lap((struct cm_lap_msg *) msg->mad, cm_id_priv, alternate_path, private_data, private_data_len); - msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + msg->timeout_ms = cm_id_priv->timeout_ms; msg->context[1] = (void *) (unsigned long) IB_CM_ESTABLISHED; - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -2360,7 +2325,6 @@ static int cm_lap_handler(struct cm_work *work) struct cm_lap_msg *lap_msg; struct ib_cm_lap_event_param *param; struct ib_mad_send_buf *msg = NULL; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2394,8 +2358,7 @@ static int cm_lap_handler(struct cm_work *work) cm_id_priv->private_data_len); spin_unlock_irqrestore(&cm_id_priv->lock, flags); - if (ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr)) + if (ib_post_send_mad(msg, NULL)) cm_free_msg(msg); goto deref; default: @@ -2451,7 +2414,6 @@ int ib_send_cm_apr(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2474,8 +2436,7 @@ int ib_send_cm_apr(struct ib_cm_id *cm_id, cm_format_apr((struct cm_apr_msg *) msg->mad, cm_id_priv, status, info, info_length, private_data, private_data_len); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -2514,8 +2475,7 @@ static int cm_apr_handler(struct cm_work *work) goto out; } cm_id_priv->id.lap_state = IB_CM_LAP_IDLE; - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); cm_id_priv->msg = NULL; ret = atomic_inc_and_test(&cm_id_priv->work_count); @@ -2590,7 +2550,6 @@ int ib_send_cm_sidr_req(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2613,13 +2572,12 @@ int ib_send_cm_sidr_req(struct ib_cm_id *cm_id, cm_format_sidr_req((struct cm_sidr_req_msg *) msg->mad, cm_id_priv, param); - msg->send_wr.wr.ud.timeout_ms = cm_id_priv->timeout_ms; + msg->timeout_ms = cm_id_priv->timeout_ms; msg->context[1] = (void *) (unsigned long) IB_CM_SIDR_REQ_SENT; spin_lock_irqsave(&cm_id_priv->lock, flags); if (cm_id->state == IB_CM_IDLE) - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); else ret = -EINVAL; @@ -2733,7 +2691,6 @@ int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id, { struct cm_id_private *cm_id_priv; struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; unsigned long flags; int ret; @@ -2755,8 +2712,7 @@ int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id, cm_format_sidr_rep((struct cm_sidr_rep_msg *) msg->mad, cm_id_priv, param); - ret = ib_post_send_mad(cm_id_priv->av.port->mad_agent, - &msg->send_wr, &bad_send_wr); + ret = ib_post_send_mad(msg, NULL); if (ret) { spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_free_msg(msg); @@ -2809,8 +2765,7 @@ static int cm_sidr_rep_handler(struct cm_work *work) goto out; } cm_id_priv->id.state = IB_CM_IDLE; - ib_cancel_mad(cm_id_priv->av.port->mad_agent, - (unsigned long) cm_id_priv->msg); + ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg); spin_unlock_irqrestore(&cm_id_priv->lock, flags); cm_format_sidr_rep_event(work); @@ -2878,9 +2833,7 @@ static void cm_process_send_error(struct ib_mad_send_buf *msg, static void cm_send_handler(struct ib_mad_agent *mad_agent, struct ib_mad_send_wc *mad_send_wc) { - struct ib_mad_send_buf *msg; - - msg = (struct ib_mad_send_buf *)(unsigned long)mad_send_wc->wr_id; + struct ib_mad_send_buf *msg = mad_send_wc->send_buf; switch (mad_send_wc->status) { case IB_WC_SUCCESS: diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index af302e830561..88f9f8c9eacc 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -579,7 +579,7 @@ static void dequeue_mad(struct ib_mad_list_head *mad_list) } static void snoop_send(struct ib_mad_qp_info *qp_info, - struct ib_send_wr *send_wr, + struct ib_mad_send_buf *send_buf, struct ib_mad_send_wc *mad_send_wc, int mad_snoop_flags) { @@ -597,7 +597,7 @@ static void snoop_send(struct ib_mad_qp_info *qp_info, atomic_inc(&mad_snoop_priv->refcount); spin_unlock_irqrestore(&qp_info->snoop_lock, flags); mad_snoop_priv->agent.snoop_handler(&mad_snoop_priv->agent, - send_wr, mad_send_wc); + send_buf, mad_send_wc); if (atomic_dec_and_test(&mad_snoop_priv->refcount)) wake_up(&mad_snoop_priv->wait); spin_lock_irqsave(&qp_info->snoop_lock, flags); @@ -654,10 +654,10 @@ static void build_smp_wc(u64 wr_id, u16 slid, u16 pkey_index, u8 port_num, * Return < 0 if error */ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, - struct ib_smp *smp, - struct ib_send_wr *send_wr) + struct ib_mad_send_wr_private *mad_send_wr) { int ret; + struct ib_smp *smp = mad_send_wr->send_buf.mad; unsigned long flags; struct ib_mad_local_private *local; struct ib_mad_private *mad_priv; @@ -666,6 +666,7 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, struct ib_device *device = mad_agent_priv->agent.device; u8 port_num = mad_agent_priv->agent.port_num; struct ib_wc mad_wc; + struct ib_send_wr *send_wr = &mad_send_wr->send_wr; if (!smi_handle_dr_smp_send(smp, device->node_type, port_num)) { ret = -EINVAL; @@ -745,13 +746,7 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, goto out; } - local->send_wr = *send_wr; - local->send_wr.sg_list = local->sg_list; - memcpy(local->sg_list, send_wr->sg_list, - sizeof *send_wr->sg_list * send_wr->num_sge); - local->send_wr.next = NULL; - local->tid = send_wr->wr.ud.mad_hdr->tid; - local->wr_id = send_wr->wr_id; + local->mad_send_wr = mad_send_wr; /* Reference MAD agent until send side of local completion handled */ atomic_inc(&mad_agent_priv->refcount); /* Queue local completion to local list */ @@ -781,17 +776,17 @@ static int get_buf_length(int hdr_len, int data_len) struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, u32 remote_qpn, u16 pkey_index, - struct ib_ah *ah, int rmpp_active, + int rmpp_active, int hdr_len, int data_len, gfp_t gfp_mask) { struct ib_mad_agent_private *mad_agent_priv; - struct ib_mad_send_buf *send_buf; + struct ib_mad_send_wr_private *mad_send_wr; int buf_size; void *buf; - mad_agent_priv = container_of(mad_agent, - struct ib_mad_agent_private, agent); + mad_agent_priv = container_of(mad_agent, struct ib_mad_agent_private, + agent); buf_size = get_buf_length(hdr_len, data_len); if ((!mad_agent->rmpp_version && @@ -799,45 +794,40 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, (!rmpp_active && buf_size > sizeof(struct ib_mad))) return ERR_PTR(-EINVAL); - buf = kmalloc(sizeof *send_buf + buf_size, gfp_mask); + buf = kmalloc(sizeof *mad_send_wr + buf_size, gfp_mask); if (!buf) return ERR_PTR(-ENOMEM); - memset(buf, 0, sizeof *send_buf + buf_size); - - send_buf = buf + buf_size; - send_buf->mad = buf; - - send_buf->sge.addr = dma_map_single(mad_agent->device->dma_device, - buf, buf_size, DMA_TO_DEVICE); - pci_unmap_addr_set(send_buf, mapping, send_buf->sge.addr); - send_buf->sge.length = buf_size; - send_buf->sge.lkey = mad_agent->mr->lkey; - - send_buf->send_wr.wr_id = (unsigned long) send_buf; - send_buf->send_wr.sg_list = &send_buf->sge; - send_buf->send_wr.num_sge = 1; - send_buf->send_wr.opcode = IB_WR_SEND; - send_buf->send_wr.send_flags = IB_SEND_SIGNALED; - send_buf->send_wr.wr.ud.ah = ah; - send_buf->send_wr.wr.ud.mad_hdr = &send_buf->mad->mad_hdr; - send_buf->send_wr.wr.ud.remote_qpn = remote_qpn; - send_buf->send_wr.wr.ud.remote_qkey = IB_QP_SET_QKEY; - send_buf->send_wr.wr.ud.pkey_index = pkey_index; + memset(buf, 0, sizeof *mad_send_wr + buf_size); + + mad_send_wr = buf + buf_size; + mad_send_wr->send_buf.mad = buf; + + mad_send_wr->mad_agent_priv = mad_agent_priv; + mad_send_wr->sg_list[0].length = buf_size; + mad_send_wr->sg_list[0].lkey = mad_agent->mr->lkey; + + mad_send_wr->send_wr.wr_id = (unsigned long) mad_send_wr; + mad_send_wr->send_wr.sg_list = mad_send_wr->sg_list; + mad_send_wr->send_wr.num_sge = 1; + mad_send_wr->send_wr.opcode = IB_WR_SEND; + mad_send_wr->send_wr.send_flags = IB_SEND_SIGNALED; + mad_send_wr->send_wr.wr.ud.remote_qpn = remote_qpn; + mad_send_wr->send_wr.wr.ud.remote_qkey = IB_QP_SET_QKEY; + mad_send_wr->send_wr.wr.ud.pkey_index = pkey_index; if (rmpp_active) { - struct ib_rmpp_mad *rmpp_mad; - rmpp_mad = (struct ib_rmpp_mad *)send_buf->mad; + struct ib_rmpp_mad *rmpp_mad = mad_send_wr->send_buf.mad; rmpp_mad->rmpp_hdr.paylen_newwin = cpu_to_be32(hdr_len - - offsetof(struct ib_rmpp_mad, data) + data_len); + IB_MGMT_RMPP_HDR + data_len); rmpp_mad->rmpp_hdr.rmpp_version = mad_agent->rmpp_version; rmpp_mad->rmpp_hdr.rmpp_type = IB_MGMT_RMPP_TYPE_DATA; ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE); } - send_buf->mad_agent = mad_agent; + mad_send_wr->send_buf.mad_agent = mad_agent; atomic_inc(&mad_agent_priv->refcount); - return send_buf; + return &mad_send_wr->send_buf; } EXPORT_SYMBOL(ib_create_send_mad); @@ -847,10 +837,6 @@ void ib_free_send_mad(struct ib_mad_send_buf *send_buf) mad_agent_priv = container_of(send_buf->mad_agent, struct ib_mad_agent_private, agent); - - dma_unmap_single(send_buf->mad_agent->device->dma_device, - pci_unmap_addr(send_buf, mapping), - send_buf->sge.length, DMA_TO_DEVICE); kfree(send_buf->mad); if (atomic_dec_and_test(&mad_agent_priv->refcount)) @@ -861,8 +847,10 @@ EXPORT_SYMBOL(ib_free_send_mad); int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr) { struct ib_mad_qp_info *qp_info; - struct ib_send_wr *bad_send_wr; struct list_head *list; + struct ib_send_wr *bad_send_wr; + struct ib_mad_agent *mad_agent; + struct ib_sge *sge; unsigned long flags; int ret; @@ -871,10 +859,17 @@ int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr) mad_send_wr->send_wr.wr_id = (unsigned long)&mad_send_wr->mad_list; mad_send_wr->mad_list.mad_queue = &qp_info->send_queue; + mad_agent = mad_send_wr->send_buf.mad_agent; + sge = mad_send_wr->sg_list; + sge->addr = dma_map_single(mad_agent->device->dma_device, + mad_send_wr->send_buf.mad, sge->length, + DMA_TO_DEVICE); + pci_unmap_addr_set(mad_send_wr, mapping, sge->addr); + spin_lock_irqsave(&qp_info->send_queue.lock, flags); if (qp_info->send_queue.count < qp_info->send_queue.max_active) { - ret = ib_post_send(mad_send_wr->mad_agent_priv->agent.qp, - &mad_send_wr->send_wr, &bad_send_wr); + ret = ib_post_send(mad_agent->qp, &mad_send_wr->send_wr, + &bad_send_wr); list = &qp_info->send_queue.list; } else { ret = 0; @@ -886,6 +881,11 @@ int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr) list_add_tail(&mad_send_wr->mad_list.list, list); } spin_unlock_irqrestore(&qp_info->send_queue.lock, flags); + if (ret) + dma_unmap_single(mad_agent->device->dma_device, + pci_unmap_addr(mad_send_wr, mapping), + sge->length, DMA_TO_DEVICE); + return ret; } @@ -893,45 +893,28 @@ int ib_send_mad(struct ib_mad_send_wr_private *mad_send_wr) * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated * with the registered client */ -int ib_post_send_mad(struct ib_mad_agent *mad_agent, - struct ib_send_wr *send_wr, - struct ib_send_wr **bad_send_wr) +int ib_post_send_mad(struct ib_mad_send_buf *send_buf, + struct ib_mad_send_buf **bad_send_buf) { - int ret = -EINVAL; struct ib_mad_agent_private *mad_agent_priv; - - /* Validate supplied parameters */ - if (!bad_send_wr) - goto error1; - - if (!mad_agent || !send_wr) - goto error2; - - if (!mad_agent->send_handler) - goto error2; - - mad_agent_priv = container_of(mad_agent, - struct ib_mad_agent_private, - agent); + struct ib_mad_send_buf *next_send_buf; + struct ib_mad_send_wr_private *mad_send_wr; + unsigned long flags; + int ret = -EINVAL; /* Walk list of send WRs and post each on send list */ - while (send_wr) { - unsigned long flags; - struct ib_send_wr *next_send_wr; - struct ib_mad_send_wr_private *mad_send_wr; - struct ib_smp *smp; - - /* Validate more parameters */ - if (send_wr->num_sge > IB_MAD_SEND_REQ_MAX_SG) - goto error2; + for (; send_buf; send_buf = next_send_buf) { - if (send_wr->wr.ud.timeout_ms && !mad_agent->recv_handler) - goto error2; + mad_send_wr = container_of(send_buf, + struct ib_mad_send_wr_private, + send_buf); + mad_agent_priv = mad_send_wr->mad_agent_priv; - if (!send_wr->wr.ud.mad_hdr) { - printk(KERN_ERR PFX "MAD header must be supplied " - "in WR %p\n", send_wr); - goto error2; + if (!send_buf->mad_agent->send_handler || + (send_buf->timeout_ms && + !send_buf->mad_agent->recv_handler)) { + ret = -EINVAL; + goto error; } /* @@ -939,40 +922,24 @@ int ib_post_send_mad(struct ib_mad_agent *mad_agent, * current one completes, and the user modifies the work * request associated with the completion */ - next_send_wr = (struct ib_send_wr *)send_wr->next; + next_send_buf = send_buf->next; + mad_send_wr->send_wr.wr.ud.ah = send_buf->ah; - smp = (struct ib_smp *)send_wr->wr.ud.mad_hdr; - if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) { - ret = handle_outgoing_dr_smp(mad_agent_priv, smp, - send_wr); + if (((struct ib_mad_hdr *) send_buf->mad)->mgmt_class == + IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) { + ret = handle_outgoing_dr_smp(mad_agent_priv, + mad_send_wr); if (ret < 0) /* error */ - goto error2; + goto error; else if (ret == 1) /* locally consumed */ - goto next; + continue; } - /* Allocate MAD send WR tracking structure */ - mad_send_wr = kmalloc(sizeof *mad_send_wr, GFP_ATOMIC); - if (!mad_send_wr) { - printk(KERN_ERR PFX "No memory for " - "ib_mad_send_wr_private\n"); - ret = -ENOMEM; - goto error2; - } - memset(mad_send_wr, 0, sizeof *mad_send_wr); - - mad_send_wr->send_wr = *send_wr; - mad_send_wr->send_wr.sg_list = mad_send_wr->sg_list; - memcpy(mad_send_wr->sg_list, send_wr->sg_list, - sizeof *send_wr->sg_list * send_wr->num_sge); - mad_send_wr->wr_id = send_wr->wr_id; - mad_send_wr->tid = send_wr->wr.ud.mad_hdr->tid; - mad_send_wr->mad_agent_priv = mad_agent_priv; + mad_send_wr->tid = ((struct ib_mad_hdr *) send_buf->mad)->tid; /* Timeout will be updated after send completes */ - mad_send_wr->timeout = msecs_to_jiffies(send_wr->wr. - ud.timeout_ms); - mad_send_wr->retries = mad_send_wr->send_wr.wr.ud.retries; - /* One reference for each work request to QP + response */ + mad_send_wr->timeout = msecs_to_jiffies(send_buf->timeout_ms); + mad_send_wr->retries = send_buf->retries; + /* Reference for work request to QP + response */ mad_send_wr->refcount = 1 + (mad_send_wr->timeout > 0); mad_send_wr->status = IB_WC_SUCCESS; @@ -995,16 +962,13 @@ int ib_post_send_mad(struct ib_mad_agent *mad_agent, list_del(&mad_send_wr->agent_list); spin_unlock_irqrestore(&mad_agent_priv->lock, flags); atomic_dec(&mad_agent_priv->refcount); - goto error2; + goto error; } -next: - send_wr = next_send_wr; } return 0; - -error2: - *bad_send_wr = send_wr; -error1: +error: + if (bad_send_buf) + *bad_send_buf = send_buf; return ret; } EXPORT_SYMBOL(ib_post_send_mad); @@ -1447,8 +1411,7 @@ find_mad_agent(struct ib_mad_port_private *port_priv, * of MAD. */ hi_tid = be64_to_cpu(mad->mad_hdr.tid) >> 32; - list_for_each_entry(entry, &port_priv->agent_list, - agent_list) { + list_for_each_entry(entry, &port_priv->agent_list, agent_list) { if (entry->agent.hi_tid == hi_tid) { mad_agent = entry; break; @@ -1571,8 +1534,7 @@ ib_find_send_mad(struct ib_mad_agent_private *mad_agent_priv, __be64 tid) */ list_for_each_entry(mad_send_wr, &mad_agent_priv->send_list, agent_list) { - if (is_data_mad(mad_agent_priv, - mad_send_wr->send_wr.wr.ud.mad_hdr) && + if (is_data_mad(mad_agent_priv, mad_send_wr->send_buf.mad) && mad_send_wr->tid == tid && mad_send_wr->timeout) { /* Verify request has not been canceled */ return (mad_send_wr->status == IB_WC_SUCCESS) ? @@ -1628,14 +1590,14 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv, spin_unlock_irqrestore(&mad_agent_priv->lock, flags); /* Defined behavior is to complete response before request */ - mad_recv_wc->wc->wr_id = mad_send_wr->wr_id; + mad_recv_wc->wc->wr_id = (unsigned long) &mad_send_wr->send_buf; mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent, mad_recv_wc); atomic_dec(&mad_agent_priv->refcount); mad_send_wc.status = IB_WC_SUCCESS; mad_send_wc.vendor_err = 0; - mad_send_wc.wr_id = mad_send_wr->wr_id; + mad_send_wc.send_buf = &mad_send_wr->send_buf; ib_mad_complete_send_wr(mad_send_wr, &mad_send_wc); } else { mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent, @@ -1728,11 +1690,11 @@ static void ib_mad_recv_done_handler(struct ib_mad_port_private *port_priv, if (ret & IB_MAD_RESULT_CONSUMED) goto out; if (ret & IB_MAD_RESULT_REPLY) { - /* Send response */ - if (!agent_send(response, &recv->grh, wc, - port_priv->device, - port_priv->port_num)) - response = NULL; + agent_send_response(&response->mad.mad, + &recv->grh, wc, + port_priv->device, + port_priv->port_num, + qp_info->qp->qp_num); goto out; } } @@ -1866,15 +1828,15 @@ void ib_mad_complete_send_wr(struct ib_mad_send_wr_private *mad_send_wr, if (mad_send_wr->status != IB_WC_SUCCESS ) mad_send_wc->status = mad_send_wr->status; - if (ret != IB_RMPP_RESULT_INTERNAL) + if (ret == IB_RMPP_RESULT_INTERNAL) + ib_rmpp_send_handler(mad_send_wc); + else mad_agent_priv->agent.send_handler(&mad_agent_priv->agent, mad_send_wc); /* Release reference on agent taken when sending */ if (atomic_dec_and_test(&mad_agent_priv->refcount)) wake_up(&mad_agent_priv->wait); - - kfree(mad_send_wr); return; done: spin_unlock_irqrestore(&mad_agent_priv->lock, flags); @@ -1888,6 +1850,7 @@ static void ib_mad_send_done_handler(struct ib_mad_port_private *port_priv, struct ib_mad_qp_info *qp_info; struct ib_mad_queue *send_queue; struct ib_send_wr *bad_send_wr; + struct ib_mad_send_wc mad_send_wc; unsigned long flags; int ret; @@ -1898,6 +1861,9 @@ static void ib_mad_send_done_handler(struct ib_mad_port_private *port_priv, qp_info = send_queue->qp_info; retry: + dma_unmap_single(mad_send_wr->send_buf.mad_agent->device->dma_device, + pci_unmap_addr(mad_send_wr, mapping), + mad_send_wr->sg_list[0].length, DMA_TO_DEVICE); queued_send_wr = NULL; spin_lock_irqsave(&send_queue->lock, flags); list_del(&mad_list->list); @@ -1914,17 +1880,17 @@ static void ib_mad_send_done_handler(struct ib_mad_port_private *port_priv, } spin_unlock_irqrestore(&send_queue->lock, flags); - /* Restore client wr_id in WC and complete send */ - wc->wr_id = mad_send_wr->wr_id; + mad_send_wc.send_buf = &mad_send_wr->send_buf; + mad_send_wc.status = wc->status; + mad_send_wc.vendor_err = wc->vendor_err; if (atomic_read(&qp_info->snoop_count)) - snoop_send(qp_info, &mad_send_wr->send_wr, - (struct ib_mad_send_wc *)wc, + snoop_send(qp_info, &mad_send_wr->send_buf, &mad_send_wc, IB_MAD_SNOOP_SEND_COMPLETIONS); - ib_mad_complete_send_wr(mad_send_wr, (struct ib_mad_send_wc *)wc); + ib_mad_complete_send_wr(mad_send_wr, &mad_send_wc); if (queued_send_wr) { ret = ib_post_send(qp_info->qp, &queued_send_wr->send_wr, - &bad_send_wr); + &bad_send_wr); if (ret) { printk(KERN_ERR PFX "ib_post_send failed: %d\n", ret); mad_send_wr = queued_send_wr; @@ -2066,38 +2032,37 @@ static void cancel_mads(struct ib_mad_agent_private *mad_agent_priv) list_for_each_entry_safe(mad_send_wr, temp_mad_send_wr, &cancel_list, agent_list) { - mad_send_wc.wr_id = mad_send_wr->wr_id; + mad_send_wc.send_buf = &mad_send_wr->send_buf; + list_del(&mad_send_wr->agent_list); mad_agent_priv->agent.send_handler(&mad_agent_priv->agent, &mad_send_wc); - - list_del(&mad_send_wr->agent_list); - kfree(mad_send_wr); atomic_dec(&mad_agent_priv->refcount); } } static struct ib_mad_send_wr_private* -find_send_by_wr_id(struct ib_mad_agent_private *mad_agent_priv, u64 wr_id) +find_send_wr(struct ib_mad_agent_private *mad_agent_priv, + struct ib_mad_send_buf *send_buf) { struct ib_mad_send_wr_private *mad_send_wr; list_for_each_entry(mad_send_wr, &mad_agent_priv->wait_list, agent_list) { - if (mad_send_wr->wr_id == wr_id) + if (&mad_send_wr->send_buf == send_buf) return mad_send_wr; } list_for_each_entry(mad_send_wr, &mad_agent_priv->send_list, agent_list) { - if (is_data_mad(mad_agent_priv, - mad_send_wr->send_wr.wr.ud.mad_hdr) && - mad_send_wr->wr_id == wr_id) + if (is_data_mad(mad_agent_priv, mad_send_wr->send_buf.mad) && + &mad_send_wr->send_buf == send_buf) return mad_send_wr; } return NULL; } -int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms) +int ib_modify_mad(struct ib_mad_agent *mad_agent, + struct ib_mad_send_buf *send_buf, u32 timeout_ms) { struct ib_mad_agent_private *mad_agent_priv; struct ib_mad_send_wr_private *mad_send_wr; @@ -2107,7 +2072,7 @@ int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms) mad_agent_priv = container_of(mad_agent, struct ib_mad_agent_private, agent); spin_lock_irqsave(&mad_agent_priv->lock, flags); - mad_send_wr = find_send_by_wr_id(mad_agent_priv, wr_id); + mad_send_wr = find_send_wr(mad_agent_priv, send_buf); if (!mad_send_wr || mad_send_wr->status != IB_WC_SUCCESS) { spin_unlock_irqrestore(&mad_agent_priv->lock, flags); return -EINVAL; @@ -2119,7 +2084,7 @@ int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms) mad_send_wr->refcount -= (mad_send_wr->timeout > 0); } - mad_send_wr->send_wr.wr.ud.timeout_ms = timeout_ms; + mad_send_wr->send_buf.timeout_ms = timeout_ms; if (active) mad_send_wr->timeout = msecs_to_jiffies(timeout_ms); else @@ -2130,9 +2095,10 @@ int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms) } EXPORT_SYMBOL(ib_modify_mad); -void ib_cancel_mad(struct ib_mad_agent *mad_agent, u64 wr_id) +void ib_cancel_mad(struct ib_mad_agent *mad_agent, + struct ib_mad_send_buf *send_buf) { - ib_modify_mad(mad_agent, wr_id, 0); + ib_modify_mad(mad_agent, send_buf, 0); } EXPORT_SYMBOL(ib_cancel_mad); @@ -2166,10 +2132,9 @@ static void local_completions(void *data) * Defined behavior is to complete response * before request */ - build_smp_wc(local->wr_id, + build_smp_wc((unsigned long) local->mad_send_wr, be16_to_cpu(IB_LID_PERMISSIVE), - 0 /* pkey index */, - recv_mad_agent->agent.port_num, &wc); + 0, recv_mad_agent->agent.port_num, &wc); local->mad_priv->header.recv_wc.wc = &wc; local->mad_priv->header.recv_wc.mad_len = @@ -2196,11 +2161,11 @@ static void local_completions(void *data) /* Complete send */ mad_send_wc.status = IB_WC_SUCCESS; mad_send_wc.vendor_err = 0; - mad_send_wc.wr_id = local->wr_id; + mad_send_wc.send_buf = &local->mad_send_wr->send_buf; if (atomic_read(&mad_agent_priv->qp_info->snoop_count)) - snoop_send(mad_agent_priv->qp_info, &local->send_wr, - &mad_send_wc, - IB_MAD_SNOOP_SEND_COMPLETIONS); + snoop_send(mad_agent_priv->qp_info, + &local->mad_send_wr->send_buf, + &mad_send_wc, IB_MAD_SNOOP_SEND_COMPLETIONS); mad_agent_priv->agent.send_handler(&mad_agent_priv->agent, &mad_send_wc); @@ -2221,8 +2186,7 @@ static int retry_send(struct ib_mad_send_wr_private *mad_send_wr) if (!mad_send_wr->retries--) return -ETIMEDOUT; - mad_send_wr->timeout = msecs_to_jiffies(mad_send_wr->send_wr. - wr.ud.timeout_ms); + mad_send_wr->timeout = msecs_to_jiffies(mad_send_wr->send_buf.timeout_ms); if (mad_send_wr->mad_agent_priv->agent.rmpp_version) { ret = ib_retry_rmpp(mad_send_wr); @@ -2285,11 +2249,10 @@ static void timeout_sends(void *data) mad_send_wc.status = IB_WC_RESP_TIMEOUT_ERR; else mad_send_wc.status = mad_send_wr->status; - mad_send_wc.wr_id = mad_send_wr->wr_id; + mad_send_wc.send_buf = &mad_send_wr->send_buf; mad_agent_priv->agent.send_handler(&mad_agent_priv->agent, &mad_send_wc); - kfree(mad_send_wr); atomic_dec(&mad_agent_priv->refcount); spin_lock_irqsave(&mad_agent_priv->lock, flags); } @@ -2761,7 +2724,6 @@ static int __init ib_mad_init_module(void) int ret; spin_lock_init(&ib_mad_port_list_lock); - spin_lock_init(&ib_agent_port_list_lock); ib_mad_cache = kmem_cache_create("ib_mad", sizeof(struct ib_mad_private), diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h index f1ba794e0daa..570f78682af3 100644 --- a/drivers/infiniband/core/mad_priv.h +++ b/drivers/infiniband/core/mad_priv.h @@ -118,9 +118,10 @@ struct ib_mad_send_wr_private { struct ib_mad_list_head mad_list; struct list_head agent_list; struct ib_mad_agent_private *mad_agent_priv; + struct ib_mad_send_buf send_buf; + DECLARE_PCI_UNMAP_ADDR(mapping) struct ib_send_wr send_wr; struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG]; - u64 wr_id; /* client WR ID */ __be64 tid; unsigned long timeout; int retries; @@ -141,10 +142,7 @@ struct ib_mad_local_private { struct list_head completion_list; struct ib_mad_private *mad_priv; struct ib_mad_agent_private *recv_mad_agent; - struct ib_send_wr send_wr; - struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG]; - u64 wr_id; /* client WR ID */ - __be64 tid; + struct ib_mad_send_wr_private *mad_send_wr; }; struct ib_mad_mgmt_method_table { diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index e23836d0e21b..ba112cd5f93c 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -103,12 +103,12 @@ void ib_cancel_rmpp_recvs(struct ib_mad_agent_private *agent) static int data_offset(u8 mgmt_class) { if (mgmt_class == IB_MGMT_CLASS_SUBN_ADM) - return offsetof(struct ib_sa_mad, data); + return IB_MGMT_SA_HDR; else if ((mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) && (mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)) - return offsetof(struct ib_vendor_mad, data); + return IB_MGMT_VENDOR_HDR; else - return offsetof(struct ib_rmpp_mad, data); + return IB_MGMT_RMPP_HDR; } static void format_ack(struct ib_rmpp_mad *ack, @@ -135,21 +135,18 @@ static void ack_recv(struct mad_rmpp_recv *rmpp_recv, struct ib_mad_recv_wc *recv_wc) { struct ib_mad_send_buf *msg; - struct ib_send_wr *bad_send_wr; - int hdr_len, ret; + int ret; - hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr); msg = ib_create_send_mad(&rmpp_recv->agent->agent, recv_wc->wc->src_qp, - recv_wc->wc->pkey_index, rmpp_recv->ah, 1, - hdr_len, sizeof(struct ib_rmpp_mad) - hdr_len, - GFP_KERNEL); + recv_wc->wc->pkey_index, 1, IB_MGMT_RMPP_HDR, + IB_MGMT_RMPP_DATA, GFP_KERNEL); if (!msg) return; - format_ack((struct ib_rmpp_mad *) msg->mad, - (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, rmpp_recv); - ret = ib_post_send_mad(&rmpp_recv->agent->agent, &msg->send_wr, - &bad_send_wr); + format_ack(msg->mad, (struct ib_rmpp_mad *) recv_wc->recv_buf.mad, + rmpp_recv); + msg->ah = rmpp_recv->ah; + ret = ib_post_send_mad(msg, NULL); if (ret) ib_free_send_mad(msg); } @@ -160,30 +157,31 @@ static int alloc_response_msg(struct ib_mad_agent *agent, { struct ib_mad_send_buf *m; struct ib_ah *ah; - int hdr_len; ah = ib_create_ah_from_wc(agent->qp->pd, recv_wc->wc, recv_wc->recv_buf.grh, agent->port_num); if (IS_ERR(ah)) return PTR_ERR(ah); - hdr_len = sizeof(struct ib_mad_hdr) + sizeof(struct ib_rmpp_hdr); m = ib_create_send_mad(agent, recv_wc->wc->src_qp, - recv_wc->wc->pkey_index, ah, 1, hdr_len, - sizeof(struct ib_rmpp_mad) - hdr_len, - GFP_KERNEL); + recv_wc->wc->pkey_index, 1, + IB_MGMT_RMPP_HDR, IB_MGMT_RMPP_DATA, GFP_KERNEL); if (IS_ERR(m)) { ib_destroy_ah(ah); return PTR_ERR(m); } + m->ah = ah; *msg = m; return 0; } -static void free_msg(struct ib_mad_send_buf *msg) +void ib_rmpp_send_handler(struct ib_mad_send_wc *mad_send_wc) { - ib_destroy_ah(msg->send_wr.wr.ud.ah); - ib_free_send_mad(msg); + struct ib_rmpp_mad *rmpp_mad = mad_send_wc->send_buf->mad; + + if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_ACK) + ib_destroy_ah(mad_send_wc->send_buf->ah); + ib_free_send_mad(mad_send_wc->send_buf); } static void nack_recv(struct ib_mad_agent_private *agent, @@ -191,14 +189,13 @@ static void nack_recv(struct ib_mad_agent_private *agent, { struct ib_mad_send_buf *msg; struct ib_rmpp_mad *rmpp_mad; - struct ib_send_wr *bad_send_wr; int ret; ret = alloc_response_msg(&agent->agent, recv_wc, &msg); if (ret) return; - rmpp_mad = (struct ib_rmpp_mad *) msg->mad; + rmpp_mad = msg->mad; memcpy(rmpp_mad, recv_wc->recv_buf.mad, data_offset(recv_wc->recv_buf.mad->mad_hdr.mgmt_class)); @@ -210,9 +207,11 @@ static void nack_recv(struct ib_mad_agent_private *agent, rmpp_mad->rmpp_hdr.seg_num = 0; rmpp_mad->rmpp_hdr.paylen_newwin = 0; - ret = ib_post_send_mad(&agent->agent, &msg->send_wr, &bad_send_wr); - if (ret) - free_msg(msg); + ret = ib_post_send_mad(msg, NULL); + if (ret) { + ib_destroy_ah(msg->ah); + ib_free_send_mad(msg); + } } static void recv_timeout_handler(void *data) @@ -585,7 +584,7 @@ static int send_next_seg(struct ib_mad_send_wr_private *mad_send_wr) int timeout; u32 paylen; - rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr; + rmpp_mad = mad_send_wr->send_buf.mad; ib_set_rmpp_flags(&rmpp_mad->rmpp_hdr, IB_MGMT_RMPP_FLAG_ACTIVE); rmpp_mad->rmpp_hdr.seg_num = cpu_to_be32(mad_send_wr->seg_num); @@ -612,7 +611,7 @@ static int send_next_seg(struct ib_mad_send_wr_private *mad_send_wr) } /* 2 seconds for an ACK until we can find the packet lifetime */ - timeout = mad_send_wr->send_wr.wr.ud.timeout_ms; + timeout = mad_send_wr->send_buf.timeout_ms; if (!timeout || timeout > 2000) mad_send_wr->timeout = msecs_to_jiffies(2000); mad_send_wr->seg_num++; @@ -640,7 +639,7 @@ static void abort_send(struct ib_mad_agent_private *agent, __be64 tid, wc.status = IB_WC_REM_ABORT_ERR; wc.vendor_err = rmpp_status; - wc.wr_id = mad_send_wr->wr_id; + wc.send_buf = &mad_send_wr->send_buf; ib_mad_complete_send_wr(mad_send_wr, &wc); return; out: @@ -694,12 +693,12 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent, if (seg_num > mad_send_wr->last_ack) { mad_send_wr->last_ack = seg_num; - mad_send_wr->retries = mad_send_wr->send_wr.wr.ud.retries; + mad_send_wr->retries = mad_send_wr->send_buf.retries; } mad_send_wr->newwin = newwin; if (mad_send_wr->last_ack == mad_send_wr->total_seg) { /* If no response is expected, the ACK completes the send */ - if (!mad_send_wr->send_wr.wr.ud.timeout_ms) { + if (!mad_send_wr->send_buf.timeout_ms) { struct ib_mad_send_wc wc; ib_mark_mad_done(mad_send_wr); @@ -707,13 +706,13 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent, wc.status = IB_WC_SUCCESS; wc.vendor_err = 0; - wc.wr_id = mad_send_wr->wr_id; + wc.send_buf = &mad_send_wr->send_buf; ib_mad_complete_send_wr(mad_send_wr, &wc); return; } if (mad_send_wr->refcount == 1) - ib_reset_mad_timeout(mad_send_wr, mad_send_wr-> - send_wr.wr.ud.timeout_ms); + ib_reset_mad_timeout(mad_send_wr, + mad_send_wr->send_buf.timeout_ms); } else if (mad_send_wr->refcount == 1 && mad_send_wr->seg_num < mad_send_wr->newwin && mad_send_wr->seg_num <= mad_send_wr->total_seg) { @@ -842,7 +841,7 @@ int ib_send_rmpp_mad(struct ib_mad_send_wr_private *mad_send_wr) struct ib_rmpp_mad *rmpp_mad; int i, total_len, ret; - rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr; + rmpp_mad = mad_send_wr->send_buf.mad; if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE)) return IB_RMPP_RESULT_UNHANDLED; @@ -863,7 +862,7 @@ int ib_send_rmpp_mad(struct ib_mad_send_wr_private *mad_send_wr) mad_send_wr->total_seg = (total_len - mad_send_wr->data_offset) / (sizeof(struct ib_rmpp_mad) - mad_send_wr->data_offset); - mad_send_wr->pad = total_len - offsetof(struct ib_rmpp_mad, data) - + mad_send_wr->pad = total_len - IB_MGMT_RMPP_HDR - be32_to_cpu(rmpp_mad->rmpp_hdr.paylen_newwin); /* We need to wait for the final ACK even if there isn't a response */ @@ -878,23 +877,15 @@ int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr, struct ib_mad_send_wc *mad_send_wc) { struct ib_rmpp_mad *rmpp_mad; - struct ib_mad_send_buf *msg; int ret; - rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr; + rmpp_mad = mad_send_wr->send_buf.mad; if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE)) return IB_RMPP_RESULT_UNHANDLED; /* RMPP not active */ - if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA) { - msg = (struct ib_mad_send_buf *) (unsigned long) - mad_send_wc->wr_id; - if (rmpp_mad->rmpp_hdr.rmpp_type == IB_MGMT_RMPP_TYPE_ACK) - ib_free_send_mad(msg); - else - free_msg(msg); + if (rmpp_mad->rmpp_hdr.rmpp_type != IB_MGMT_RMPP_TYPE_DATA) return IB_RMPP_RESULT_INTERNAL; /* ACK, STOP, or ABORT */ - } if (mad_send_wc->status != IB_WC_SUCCESS || mad_send_wr->status != IB_WC_SUCCESS) @@ -905,7 +896,7 @@ int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr, if (mad_send_wr->last_ack == mad_send_wr->total_seg) { mad_send_wr->timeout = - msecs_to_jiffies(mad_send_wr->send_wr.wr.ud.timeout_ms); + msecs_to_jiffies(mad_send_wr->send_buf.timeout_ms); return IB_RMPP_RESULT_PROCESSED; /* Send done */ } @@ -926,7 +917,7 @@ int ib_retry_rmpp(struct ib_mad_send_wr_private *mad_send_wr) struct ib_rmpp_mad *rmpp_mad; int ret; - rmpp_mad = (struct ib_rmpp_mad *)mad_send_wr->send_wr.wr.ud.mad_hdr; + rmpp_mad = mad_send_wr->send_buf.mad; if (!(ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE)) return IB_RMPP_RESULT_UNHANDLED; /* RMPP not active */ diff --git a/drivers/infiniband/core/mad_rmpp.h b/drivers/infiniband/core/mad_rmpp.h index c4924dfb8e75..f0616fd22494 100644 --- a/drivers/infiniband/core/mad_rmpp.h +++ b/drivers/infiniband/core/mad_rmpp.h @@ -51,6 +51,8 @@ ib_process_rmpp_recv_wc(struct ib_mad_agent_private *agent, int ib_process_rmpp_send_wc(struct ib_mad_send_wr_private *mad_send_wr, struct ib_mad_send_wc *mad_send_wc); +void ib_rmpp_send_handler(struct ib_mad_send_wc *mad_send_wc); + void ib_cancel_rmpp_recvs(struct ib_mad_agent_private *agent); int ib_retry_rmpp(struct ib_mad_send_wr_private *mad_send_wr); diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 0e5ef97f7637..89ce9dc210d4 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -73,11 +73,10 @@ struct ib_sa_device { struct ib_sa_query { void (*callback)(struct ib_sa_query *, int, struct ib_sa_mad *); void (*release)(struct ib_sa_query *); - struct ib_sa_port *port; - struct ib_sa_mad *mad; - struct ib_sa_sm_ah *sm_ah; - DECLARE_PCI_UNMAP_ADDR(mapping) - int id; + struct ib_sa_port *port; + struct ib_mad_send_buf *mad_buf; + struct ib_sa_sm_ah *sm_ah; + int id; }; struct ib_sa_service_query { @@ -426,6 +425,7 @@ void ib_sa_cancel_query(int id, struct ib_sa_query *query) { unsigned long flags; struct ib_mad_agent *agent; + struct ib_mad_send_buf *mad_buf; spin_lock_irqsave(&idr_lock, flags); if (idr_find(&query_idr, id) != query) { @@ -433,9 +433,10 @@ void ib_sa_cancel_query(int id, struct ib_sa_query *query) return; } agent = query->port->agent; + mad_buf = query->mad_buf; spin_unlock_irqrestore(&idr_lock, flags); - ib_cancel_mad(agent, id); + ib_cancel_mad(agent, mad_buf); } EXPORT_SYMBOL(ib_sa_cancel_query); @@ -457,71 +458,46 @@ static void init_mad(struct ib_sa_mad *mad, struct ib_mad_agent *agent) static int send_mad(struct ib_sa_query *query, int timeout_ms) { - struct ib_sa_port *port = query->port; unsigned long flags; - int ret; - struct ib_sge gather_list; - struct ib_send_wr *bad_wr, wr = { - .opcode = IB_WR_SEND, - .sg_list = &gather_list, - .num_sge = 1, - .send_flags = IB_SEND_SIGNALED, - .wr = { - .ud = { - .mad_hdr = &query->mad->mad_hdr, - .remote_qpn = 1, - .remote_qkey = IB_QP1_QKEY, - .timeout_ms = timeout_ms, - } - } - }; + int ret, id; retry: if (!idr_pre_get(&query_idr, GFP_ATOMIC)) return -ENOMEM; spin_lock_irqsave(&idr_lock, flags); - ret = idr_get_new(&query_idr, query, &query->id); + ret = idr_get_new(&query_idr, query, &id); spin_unlock_irqrestore(&idr_lock, flags); if (ret == -EAGAIN) goto retry; if (ret) return ret; - wr.wr_id = query->id; + query->mad_buf->timeout_ms = timeout_ms; + query->mad_buf->context[0] = query; + query->id = id; - spin_lock_irqsave(&port->ah_lock, flags); - kref_get(&port->sm_ah->ref); - query->sm_ah = port->sm_ah; - wr.wr.ud.ah = port->sm_ah->ah; - spin_unlock_irqrestore(&port->ah_lock, flags); + spin_lock_irqsave(&query->port->ah_lock, flags); + kref_get(&query->port->sm_ah->ref); + query->sm_ah = query->port->sm_ah; + spin_unlock_irqrestore(&query->port->ah_lock, flags); - gather_list.addr = dma_map_single(port->agent->device->dma_device, - query->mad, - sizeof (struct ib_sa_mad), - DMA_TO_DEVICE); - gather_list.length = sizeof (struct ib_sa_mad); - gather_list.lkey = port->agent->mr->lkey; - pci_unmap_addr_set(query, mapping, gather_list.addr); + query->mad_buf->ah = query->sm_ah->ah; - ret = ib_post_send_mad(port->agent, &wr, &bad_wr); + ret = ib_post_send_mad(query->mad_buf, NULL); if (ret) { - dma_unmap_single(port->agent->device->dma_device, - pci_unmap_addr(query, mapping), - sizeof (struct ib_sa_mad), - DMA_TO_DEVICE); - kref_put(&query->sm_ah->ref, free_sm_ah); spin_lock_irqsave(&idr_lock, flags); - idr_remove(&query_idr, query->id); + idr_remove(&query_idr, id); spin_unlock_irqrestore(&idr_lock, flags); + + kref_put(&query->sm_ah->ref, free_sm_ah); } /* * It's not safe to dereference query any more, because the * send may already have completed and freed the query in - * another context. So use wr.wr_id, which has a copy of the - * query's id. + * another context. */ - return ret ? ret : wr.wr_id; + return ret ? ret : id; } static void ib_sa_path_rec_callback(struct ib_sa_query *sa_query, @@ -543,7 +519,6 @@ static void ib_sa_path_rec_callback(struct ib_sa_query *sa_query, static void ib_sa_path_rec_release(struct ib_sa_query *sa_query) { - kfree(sa_query->mad); kfree(container_of(sa_query, struct ib_sa_path_query, sa_query)); } @@ -585,6 +560,7 @@ int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); struct ib_sa_port *port; struct ib_mad_agent *agent; + struct ib_sa_mad *mad; int ret; if (!sa_dev) @@ -596,36 +572,44 @@ int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; - query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask); - if (!query->sa_query.mad) { - kfree(query); - return -ENOMEM; + + query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0, + 0, IB_MGMT_SA_HDR, + IB_MGMT_SA_DATA, gfp_mask); + if (!query->sa_query.mad_buf) { + ret = -ENOMEM; + goto err1; } query->callback = callback; query->context = context; - init_mad(query->sa_query.mad, agent); + mad = query->sa_query.mad_buf->mad; + init_mad(mad, agent); - query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL; - query->sa_query.release = ib_sa_path_rec_release; - query->sa_query.port = port; - query->sa_query.mad->mad_hdr.method = IB_MGMT_METHOD_GET; - query->sa_query.mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_PATH_REC); - query->sa_query.mad->sa_hdr.comp_mask = comp_mask; + query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL; + query->sa_query.release = ib_sa_path_rec_release; + query->sa_query.port = port; + mad->mad_hdr.method = IB_MGMT_METHOD_GET; + mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_PATH_REC); + mad->sa_hdr.comp_mask = comp_mask; - ib_pack(path_rec_table, ARRAY_SIZE(path_rec_table), - rec, query->sa_query.mad->data); + ib_pack(path_rec_table, ARRAY_SIZE(path_rec_table), rec, mad->data); *sa_query = &query->sa_query; ret = send_mad(&query->sa_query, timeout_ms); - if (ret < 0) { - *sa_query = NULL; - kfree(query->sa_query.mad); - kfree(query); - } + if (ret < 0) + goto err2; + + return ret; + +err2: + *sa_query = NULL; + ib_free_send_mad(query->sa_query.mad_buf); +err1: + kfree(query); return ret; } EXPORT_SYMBOL(ib_sa_path_rec_get); @@ -649,7 +633,6 @@ static void ib_sa_service_rec_callback(struct ib_sa_query *sa_query, static void ib_sa_service_rec_release(struct ib_sa_query *sa_query) { - kfree(sa_query->mad); kfree(container_of(sa_query, struct ib_sa_service_query, sa_query)); } @@ -693,6 +676,7 @@ int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); struct ib_sa_port *port; struct ib_mad_agent *agent; + struct ib_sa_mad *mad; int ret; if (!sa_dev) @@ -709,37 +693,45 @@ int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method, query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; - query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask); - if (!query->sa_query.mad) { - kfree(query); - return -ENOMEM; + + query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0, + 0, IB_MGMT_SA_HDR, + IB_MGMT_SA_DATA, gfp_mask); + if (!query->sa_query.mad_buf) { + ret = -ENOMEM; + goto err1; } query->callback = callback; query->context = context; - init_mad(query->sa_query.mad, agent); + mad = query->sa_query.mad_buf->mad; + init_mad(mad, agent); - query->sa_query.callback = callback ? ib_sa_service_rec_callback : NULL; - query->sa_query.release = ib_sa_service_rec_release; - query->sa_query.port = port; - query->sa_query.mad->mad_hdr.method = method; - query->sa_query.mad->mad_hdr.attr_id = - cpu_to_be16(IB_SA_ATTR_SERVICE_REC); - query->sa_query.mad->sa_hdr.comp_mask = comp_mask; + query->sa_query.callback = callback ? ib_sa_service_rec_callback : NULL; + query->sa_query.release = ib_sa_service_rec_release; + query->sa_query.port = port; + mad->mad_hdr.method = method; + mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_SERVICE_REC); + mad->sa_hdr.comp_mask = comp_mask; ib_pack(service_rec_table, ARRAY_SIZE(service_rec_table), - rec, query->sa_query.mad->data); + rec, mad->data); *sa_query = &query->sa_query; ret = send_mad(&query->sa_query, timeout_ms); - if (ret < 0) { - *sa_query = NULL; - kfree(query->sa_query.mad); - kfree(query); - } + if (ret < 0) + goto err2; + + return ret; +err2: + *sa_query = NULL; + ib_free_send_mad(query->sa_query.mad_buf); + +err1: + kfree(query); return ret; } EXPORT_SYMBOL(ib_sa_service_rec_query); @@ -763,7 +755,6 @@ static void ib_sa_mcmember_rec_callback(struct ib_sa_query *sa_query, static void ib_sa_mcmember_rec_release(struct ib_sa_query *sa_query) { - kfree(sa_query->mad); kfree(container_of(sa_query, struct ib_sa_mcmember_query, sa_query)); } @@ -782,6 +773,7 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client); struct ib_sa_port *port; struct ib_mad_agent *agent; + struct ib_sa_mad *mad; int ret; if (!sa_dev) @@ -793,53 +785,55 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, query = kmalloc(sizeof *query, gfp_mask); if (!query) return -ENOMEM; - query->sa_query.mad = kmalloc(sizeof *query->sa_query.mad, gfp_mask); - if (!query->sa_query.mad) { - kfree(query); - return -ENOMEM; + + query->sa_query.mad_buf = ib_create_send_mad(agent, 1, 0, + 0, IB_MGMT_SA_HDR, + IB_MGMT_SA_DATA, gfp_mask); + if (!query->sa_query.mad_buf) { + ret = -ENOMEM; + goto err1; } query->callback = callback; query->context = context; - init_mad(query->sa_query.mad, agent); + mad = query->sa_query.mad_buf->mad; + init_mad(mad, agent); - query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL; - query->sa_query.release = ib_sa_mcmember_rec_release; - query->sa_query.port = port; - query->sa_query.mad->mad_hdr.method = method; - query->sa_query.mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_MC_MEMBER_REC); - query->sa_query.mad->sa_hdr.comp_mask = comp_mask; + query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL; + query->sa_query.release = ib_sa_mcmember_rec_release; + query->sa_query.port = port; + mad->mad_hdr.method = method; + mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_MC_MEMBER_REC); + mad->sa_hdr.comp_mask = comp_mask; ib_pack(mcmember_rec_table, ARRAY_SIZE(mcmember_rec_table), - rec, query->sa_query.mad->data); + rec, mad->data); *sa_query = &query->sa_query; ret = send_mad(&query->sa_query, timeout_ms); - if (ret < 0) { - *sa_query = NULL; - kfree(query->sa_query.mad); - kfree(query); - } + if (ret < 0) + goto err2; return ret; + +err2: + *sa_query = NULL; + ib_free_send_mad(query->sa_query.mad_buf); + +err1: + kfree(query); + return ret; } EXPORT_SYMBOL(ib_sa_mcmember_rec_query); static void send_handler(struct ib_mad_agent *agent, struct ib_mad_send_wc *mad_send_wc) { - struct ib_sa_query *query; + struct ib_sa_query *query = mad_send_wc->send_buf->context[0]; unsigned long flags; - spin_lock_irqsave(&idr_lock, flags); - query = idr_find(&query_idr, mad_send_wc->wr_id); - spin_unlock_irqrestore(&idr_lock, flags); - - if (!query) - return; - if (query->callback) switch (mad_send_wc->status) { case IB_WC_SUCCESS: @@ -856,30 +850,25 @@ static void send_handler(struct ib_mad_agent *agent, break; } - dma_unmap_single(agent->device->dma_device, - pci_unmap_addr(query, mapping), - sizeof (struct ib_sa_mad), - DMA_TO_DEVICE); - kref_put(&query->sm_ah->ref, free_sm_ah); - - query->release(query); - spin_lock_irqsave(&idr_lock, flags); - idr_remove(&query_idr, mad_send_wc->wr_id); + idr_remove(&query_idr, query->id); spin_unlock_irqrestore(&idr_lock, flags); + + ib_free_send_mad(mad_send_wc->send_buf); + kref_put(&query->sm_ah->ref, free_sm_ah); + query->release(query); } static void recv_handler(struct ib_mad_agent *mad_agent, struct ib_mad_recv_wc *mad_recv_wc) { struct ib_sa_query *query; - unsigned long flags; + struct ib_mad_send_buf *mad_buf; - spin_lock_irqsave(&idr_lock, flags); - query = idr_find(&query_idr, mad_recv_wc->wc->wr_id); - spin_unlock_irqrestore(&idr_lock, flags); + mad_buf = (void *) (unsigned long) mad_recv_wc->wc->wr_id; + query = mad_buf->context[0]; - if (query && query->callback) { + if (query->callback) { if (mad_recv_wc->wc->status == IB_WC_SUCCESS) query->callback(query, mad_recv_wc->recv_buf.mad->mad_hdr.status ? diff --git a/drivers/infiniband/core/smi.h b/drivers/infiniband/core/smi.h index db25503a0736..2b3c40198f81 100644 --- a/drivers/infiniband/core/smi.h +++ b/drivers/infiniband/core/smi.h @@ -39,6 +39,8 @@ #ifndef __SMI_H_ #define __SMI_H_ +#include + int smi_handle_dr_smp_recv(struct ib_smp *smp, u8 node_type, int port_num, diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index fd200c064a2e..fc5519a3de99 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -96,7 +96,6 @@ struct ib_umad_file { }; struct ib_umad_packet { - struct ib_ah *ah; struct ib_mad_send_buf *msg; struct list_head list; int length; @@ -139,10 +138,10 @@ static void send_handler(struct ib_mad_agent *agent, struct ib_mad_send_wc *send_wc) { struct ib_umad_file *file = agent->context; - struct ib_umad_packet *timeout, *packet = - (void *) (unsigned long) send_wc->wr_id; + struct ib_umad_packet *timeout; + struct ib_umad_packet *packet = send_wc->send_buf->context[0]; - ib_destroy_ah(packet->msg->send_wr.wr.ud.ah); + ib_destroy_ah(packet->msg->ah); ib_free_send_mad(packet->msg); if (send_wc->status == IB_WC_RESP_TIMEOUT_ERR) { @@ -268,11 +267,11 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, struct ib_umad_packet *packet; struct ib_mad_agent *agent; struct ib_ah_attr ah_attr; - struct ib_send_wr *bad_wr; + struct ib_ah *ah; struct ib_rmpp_mad *rmpp_mad; u8 method; __be64 *tid; - int ret, length, hdr_len, data_len, rmpp_hdr_size; + int ret, length, hdr_len, rmpp_hdr_size; int rmpp_active = 0; if (count < sizeof (struct ib_user_mad)) @@ -321,9 +320,9 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, ah_attr.grh.traffic_class = packet->mad.hdr.traffic_class; } - packet->ah = ib_create_ah(agent->qp->pd, &ah_attr); - if (IS_ERR(packet->ah)) { - ret = PTR_ERR(packet->ah); + ah = ib_create_ah(agent->qp->pd, &ah_attr); + if (IS_ERR(ah)) { + ret = PTR_ERR(ah); goto err_up; } @@ -337,12 +336,10 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, /* Validate that the management class can support RMPP */ if (rmpp_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_ADM) { - hdr_len = offsetof(struct ib_sa_mad, data); - data_len = length - hdr_len; + hdr_len = IB_MGMT_SA_HDR; } else if ((rmpp_mad->mad_hdr.mgmt_class >= IB_MGMT_CLASS_VENDOR_RANGE2_START) && (rmpp_mad->mad_hdr.mgmt_class <= IB_MGMT_CLASS_VENDOR_RANGE2_END)) { - hdr_len = offsetof(struct ib_vendor_mad, data); - data_len = length - hdr_len; + hdr_len = IB_MGMT_VENDOR_HDR; } else { ret = -EINVAL; goto err_ah; @@ -353,25 +350,23 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, ret = -EINVAL; goto err_ah; } - hdr_len = offsetof(struct ib_mad, data); - data_len = length - hdr_len; + hdr_len = IB_MGMT_MAD_HDR; } packet->msg = ib_create_send_mad(agent, be32_to_cpu(packet->mad.hdr.qpn), - 0, packet->ah, rmpp_active, - hdr_len, data_len, + 0, rmpp_active, + hdr_len, length - hdr_len, GFP_KERNEL); if (IS_ERR(packet->msg)) { ret = PTR_ERR(packet->msg); goto err_ah; } - packet->msg->send_wr.wr.ud.timeout_ms = packet->mad.hdr.timeout_ms; - packet->msg->send_wr.wr.ud.retries = packet->mad.hdr.retries; - - /* Override send WR WRID initialized in ib_create_send_mad */ - packet->msg->send_wr.wr_id = (unsigned long) packet; + packet->msg->ah = ah; + packet->msg->timeout_ms = packet->mad.hdr.timeout_ms; + packet->msg->retries = packet->mad.hdr.retries; + packet->msg->context[0] = packet; if (!rmpp_active) { /* Copy message from user into send buffer */ @@ -403,17 +398,17 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, * transaction ID matches the agent being used to send the * MAD. */ - method = packet->msg->mad->mad_hdr.method; + method = ((struct ib_mad_hdr *) packet->msg)->method; if (!(method & IB_MGMT_METHOD_RESP) && method != IB_MGMT_METHOD_TRAP_REPRESS && method != IB_MGMT_METHOD_SEND) { - tid = &packet->msg->mad->mad_hdr.tid; + tid = &((struct ib_mad_hdr *) packet->msg)->tid; *tid = cpu_to_be64(((u64) agent->hi_tid) << 32 | (be64_to_cpup(tid) & 0xffffffff)); } - ret = ib_post_send_mad(agent, &packet->msg->send_wr, &bad_wr); + ret = ib_post_send_mad(packet->msg, NULL); if (ret) goto err_msg; @@ -425,7 +420,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, ib_free_send_mad(packet->msg); err_ah: - ib_destroy_ah(packet->ah); + ib_destroy_ah(ah); err_up: up_read(&file->agent_mutex); diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c index 9804174f7f3c..8561b297a19b 100644 --- a/drivers/infiniband/hw/mthca/mthca_mad.c +++ b/drivers/infiniband/hw/mthca/mthca_mad.c @@ -46,11 +46,6 @@ enum { MTHCA_VENDOR_CLASS2 = 0xa }; -struct mthca_trap_mad { - struct ib_mad *mad; - DECLARE_PCI_UNMAP_ADDR(mapping) -}; - static void update_sm_ah(struct mthca_dev *dev, u8 port_num, u16 lid, u8 sl) { @@ -116,49 +111,14 @@ static void forward_trap(struct mthca_dev *dev, struct ib_mad *mad) { int qpn = mad->mad_hdr.mgmt_class != IB_MGMT_CLASS_SUBN_LID_ROUTED; - struct mthca_trap_mad *tmad; - struct ib_sge gather_list; - struct ib_send_wr *bad_wr, wr = { - .opcode = IB_WR_SEND, - .sg_list = &gather_list, - .num_sge = 1, - .send_flags = IB_SEND_SIGNALED, - .wr = { - .ud = { - .remote_qpn = qpn, - .remote_qkey = qpn ? IB_QP1_QKEY : 0, - .timeout_ms = 0 - } - } - }; + struct ib_mad_send_buf *send_buf; struct ib_mad_agent *agent = dev->send_agent[port_num - 1][qpn]; int ret; unsigned long flags; if (agent) { - tmad = kmalloc(sizeof *tmad, GFP_KERNEL); - if (!tmad) - return; - - tmad->mad = kmalloc(sizeof *tmad->mad, GFP_KERNEL); - if (!tmad->mad) { - kfree(tmad); - return; - } - - memcpy(tmad->mad, mad, sizeof *mad); - - wr.wr.ud.mad_hdr = &tmad->mad->mad_hdr; - wr.wr_id = (unsigned long) tmad; - - gather_list.addr = dma_map_single(agent->device->dma_device, - tmad->mad, - sizeof *tmad->mad, - DMA_TO_DEVICE); - gather_list.length = sizeof *tmad->mad; - gather_list.lkey = to_mpd(agent->qp->pd)->ntmr.ibmr.lkey; - pci_unmap_addr_set(tmad, mapping, gather_list.addr); - + send_buf = ib_create_send_mad(agent, qpn, 0, 0, IB_MGMT_MAD_HDR, + IB_MGMT_MAD_DATA, GFP_ATOMIC); /* * We rely here on the fact that MLX QPs don't use the * address handle after the send is posted (this is @@ -166,21 +126,15 @@ static void forward_trap(struct mthca_dev *dev, * it's OK for our devices). */ spin_lock_irqsave(&dev->sm_lock, flags); - wr.wr.ud.ah = dev->sm_ah[port_num - 1]; - if (wr.wr.ud.ah) - ret = ib_post_send_mad(agent, &wr, &bad_wr); + memcpy(send_buf->mad, mad, sizeof *mad); + if ((send_buf->ah = dev->sm_ah[port_num - 1])) + ret = ib_post_send_mad(send_buf, NULL); else ret = -EINVAL; spin_unlock_irqrestore(&dev->sm_lock, flags); - if (ret) { - dma_unmap_single(agent->device->dma_device, - pci_unmap_addr(tmad, mapping), - sizeof *tmad->mad, - DMA_TO_DEVICE); - kfree(tmad->mad); - kfree(tmad); - } + if (ret) + ib_free_send_mad(send_buf); } } @@ -267,15 +221,7 @@ int mthca_process_mad(struct ib_device *ibdev, static void send_handler(struct ib_mad_agent *agent, struct ib_mad_send_wc *mad_send_wc) { - struct mthca_trap_mad *tmad = - (void *) (unsigned long) mad_send_wc->wr_id; - - dma_unmap_single(agent->device->dma_device, - pci_unmap_addr(tmad, mapping), - sizeof *tmad->mad, - DMA_TO_DEVICE); - kfree(tmad->mad); - kfree(tmad); + ib_free_send_mad(mad_send_wc->send_buf); } int mthca_create_agents(struct mthca_dev *dev) diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h index 4172e6841e3d..2c133506742b 100644 --- a/include/rdma/ib_mad.h +++ b/include/rdma/ib_mad.h @@ -109,10 +109,14 @@ #define IB_QP_SET_QKEY 0x80000000 enum { + IB_MGMT_MAD_HDR = 24, IB_MGMT_MAD_DATA = 232, + IB_MGMT_RMPP_HDR = 36, IB_MGMT_RMPP_DATA = 220, + IB_MGMT_VENDOR_HDR = 40, IB_MGMT_VENDOR_DATA = 216, - IB_MGMT_SA_DATA = 200 + IB_MGMT_SA_HDR = 56, + IB_MGMT_SA_DATA = 200, }; struct ib_mad_hdr { @@ -203,26 +207,25 @@ struct ib_class_port_info /** * ib_mad_send_buf - MAD data buffer and work request for sends. - * @mad: References an allocated MAD data buffer. The size of the data - * buffer is specified in the @send_wr.length field. - * @mapping: DMA mapping information. + * @next: A pointer used to chain together MADs for posting. + * @mad: References an allocated MAD data buffer. * @mad_agent: MAD agent that allocated the buffer. + * @ah: The address handle to use when sending the MAD. * @context: User-controlled context fields. - * @send_wr: An initialized work request structure used when sending the MAD. - * The wr_id field of the work request is initialized to reference this - * data structure. - * @sge: A scatter-gather list referenced by the work request. + * @timeout_ms: Time to wait for a response. + * @retries: Number of times to retry a request for a response. * * Users are responsible for initializing the MAD buffer itself, with the * exception of specifying the payload length field in any RMPP MAD. */ struct ib_mad_send_buf { - struct ib_mad *mad; - DECLARE_PCI_UNMAP_ADDR(mapping) + struct ib_mad_send_buf *next; + void *mad; struct ib_mad_agent *mad_agent; + struct ib_ah *ah; void *context[2]; - struct ib_send_wr send_wr; - struct ib_sge sge; + int timeout_ms; + int retries; }; /** @@ -287,7 +290,7 @@ typedef void (*ib_mad_send_handler)(struct ib_mad_agent *mad_agent, * or @mad_send_wc. */ typedef void (*ib_mad_snoop_handler)(struct ib_mad_agent *mad_agent, - struct ib_send_wr *send_wr, + struct ib_mad_send_buf *send_buf, struct ib_mad_send_wc *mad_send_wc); /** @@ -334,13 +337,13 @@ struct ib_mad_agent { /** * ib_mad_send_wc - MAD send completion information. - * @wr_id: Work request identifier associated with the send MAD request. + * @send_buf: Send MAD data buffer associated with the send MAD request. * @status: Completion status. * @vendor_err: Optional vendor error information returned with a failed * request. */ struct ib_mad_send_wc { - u64 wr_id; + struct ib_mad_send_buf *send_buf; enum ib_wc_status status; u32 vendor_err; }; @@ -366,7 +369,7 @@ struct ib_mad_recv_buf { * @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers. * @mad_len: The length of the received MAD, without duplicated headers. * - * For received response, the wr_id field of the wc is set to the wr_id + * For received response, the wr_id contains a pointer to the ib_mad_send_buf * for the corresponding send request. */ struct ib_mad_recv_wc { @@ -463,9 +466,9 @@ int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent); /** * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated * with the registered client. - * @mad_agent: Specifies the associated registration to post the send to. - * @send_wr: Specifies the information needed to send the MAD(s). - * @bad_send_wr: Specifies the MAD on which an error was encountered. + * @send_buf: Specifies the information needed to send the MAD(s). + * @bad_send_buf: Specifies the MAD on which an error was encountered. This + * parameter is optional if only a single MAD is posted. * * Sent MADs are not guaranteed to complete in the order that they were posted. * @@ -479,9 +482,8 @@ int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent); * defined data being transferred. The paylen_newwin field should be * specified in network-byte order. */ -int ib_post_send_mad(struct ib_mad_agent *mad_agent, - struct ib_send_wr *send_wr, - struct ib_send_wr **bad_send_wr); +int ib_post_send_mad(struct ib_mad_send_buf *send_buf, + struct ib_mad_send_buf **bad_send_buf); /** * ib_coalesce_recv_mad - Coalesces received MAD data into a single buffer. @@ -507,23 +509,25 @@ void ib_free_recv_mad(struct ib_mad_recv_wc *mad_recv_wc); /** * ib_cancel_mad - Cancels an outstanding send MAD operation. * @mad_agent: Specifies the registration associated with sent MAD. - * @wr_id: Indicates the work request identifier of the MAD to cancel. + * @send_buf: Indicates the MAD to cancel. * * MADs will be returned to the user through the corresponding * ib_mad_send_handler. */ -void ib_cancel_mad(struct ib_mad_agent *mad_agent, u64 wr_id); +void ib_cancel_mad(struct ib_mad_agent *mad_agent, + struct ib_mad_send_buf *send_buf); /** * ib_modify_mad - Modifies an outstanding send MAD operation. * @mad_agent: Specifies the registration associated with sent MAD. - * @wr_id: Indicates the work request identifier of the MAD to modify. + * @send_buf: Indicates the MAD to modify. * @timeout_ms: New timeout value for sent MAD. * * This call will reset the timeout value for a sent MAD to the specified * value. */ -int ib_modify_mad(struct ib_mad_agent *mad_agent, u64 wr_id, u32 timeout_ms); +int ib_modify_mad(struct ib_mad_agent *mad_agent, + struct ib_mad_send_buf *send_buf, u32 timeout_ms); /** * ib_redirect_mad_qp - Registers a QP for MAD services. @@ -572,7 +576,6 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent, * @remote_qpn: Specifies the QPN of the receiving node. * @pkey_index: Specifies which PKey the MAD will be sent using. This field * is valid only if the remote_qpn is QP 1. - * @ah: References the address handle used to transfer to the remote node. * @rmpp_active: Indicates if the send will enable RMPP. * @hdr_len: Indicates the size of the data header of the MAD. This length * should include the common MAD header, RMPP header, plus any class @@ -582,11 +585,10 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent, * additional padding that may be necessary. * @gfp_mask: GFP mask used for the memory allocation. * - * This is a helper routine that may be used to allocate a MAD. Users are - * not required to allocate outbound MADs using this call. The returned - * MAD send buffer will reference a data buffer usable for sending a MAD, along + * This routine allocates a MAD for sending. The returned MAD send buffer + * will reference a data buffer usable for sending a MAD, along * with an initialized work request structure. Users may modify the returned - * MAD data buffer or work request before posting the send. + * MAD data buffer before posting the send. * * The returned data buffer will be cleared. Users are responsible for * initializing the common MAD and any class specific headers. If @rmpp_active @@ -594,7 +596,7 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent, */ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, u32 remote_qpn, u16 pkey_index, - struct ib_ah *ah, int rmpp_active, + int rmpp_active, int hdr_len, int data_len, gfp_t gfp_mask); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index a5a963cb5676..f72d46d54e0a 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -595,11 +595,8 @@ struct ib_send_wr { } atomic; struct { struct ib_ah *ah; - struct ib_mad_hdr *mad_hdr; u32 remote_qpn; u32 remote_qkey; - int timeout_ms; /* valid for MADs only */ - int retries; /* valid for MADs only */ u16 pkey_index; /* valid for GSI only */ u8 port_num; /* valid for DR SMPs on switch only */ } ud; -- GitLab From 547e3090738b04be650770b64265835dbb6ddf92 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 25 Oct 2005 10:57:32 -0700 Subject: [PATCH 0401/1519] [IB] mthca: correct modify QP attribute masks for UC The UC transport does not support RDMA reads or atomic operations, so we shouldn't require or even allow the consumer to set attributes relating to these operations for UC QPs. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_qp.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 2ee0a2b0fd4b..62ff091505da 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -338,8 +338,7 @@ static const struct { [UC] = (IB_QP_AV | IB_QP_PATH_MTU | IB_QP_DEST_QPN | - IB_QP_RQ_PSN | - IB_QP_MAX_DEST_RD_ATOMIC), + IB_QP_RQ_PSN), [RC] = (IB_QP_AV | IB_QP_PATH_MTU | IB_QP_DEST_QPN | @@ -368,8 +367,7 @@ static const struct { .trans = MTHCA_TRANS_RTR2RTS, .req_param = { [UD] = IB_QP_SQ_PSN, - [UC] = (IB_QP_SQ_PSN | - IB_QP_MAX_QP_RD_ATOMIC), + [UC] = IB_QP_SQ_PSN, [RC] = (IB_QP_TIMEOUT | IB_QP_RETRY_CNT | IB_QP_RNR_RETRY | @@ -446,8 +444,6 @@ static const struct { [UD] = (IB_QP_PKEY_INDEX | IB_QP_QKEY), [UC] = (IB_QP_AV | - IB_QP_MAX_QP_RD_ATOMIC | - IB_QP_MAX_DEST_RD_ATOMIC | IB_QP_CUR_STATE | IB_QP_ALT_PATH | IB_QP_ACCESS_FLAGS | @@ -478,7 +474,7 @@ static const struct { .opt_param = { [UD] = (IB_QP_CUR_STATE | IB_QP_QKEY), - [UC] = (IB_QP_CUR_STATE), + [UC] = IB_QP_CUR_STATE, [RC] = (IB_QP_CUR_STATE | IB_QP_MIN_RNR_TIMER), [MLX] = (IB_QP_CUR_STATE | -- GitLab From b6a7e1ecef66b9ecd1eed31f46ba0248d6d7e957 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Thu, 20 Oct 2005 12:31:19 +1000 Subject: [PATCH 0402/1519] [IA64] Allow simulator to use bigger disks The simscsi code at present overflows an int if it's given a large disk image. The attached patch increases the possible size to 128G. While it's unlikely that anyone will want to use SKI with such a large drive, the same framework is currently being used for various virtualisation experiments. Signed-off-by: Peter Chubb Signed-off-by: Tony Luck --- arch/ia64/hp/sim/simscsi.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c index a18983a3c934..a3fe97531134 100644 --- a/arch/ia64/hp/sim/simscsi.c +++ b/arch/ia64/hp/sim/simscsi.c @@ -205,10 +205,11 @@ simscsi_get_disk_size (int fd) char buf[512]; /* - * This is a bit kludgey: the simulator doesn't provide a direct way of determining - * the disk size, so we do a binary search, assuming a maximum disk size of 4GB. + * This is a bit kludgey: the simulator doesn't provide a + * direct way of determining the disk size, so we do a binary + * search, assuming a maximum disk size of 128GB. */ - for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) { + for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) { req.addr = __pa(&buf); req.len = sizeof(buf); ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); @@ -225,8 +226,10 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) { unsigned long offset; - offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16) - | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512; + offset = (((unsigned long)sc->cmnd[2] << 24) + | ((unsigned long)sc->cmnd[3] << 16) + | ((unsigned long)sc->cmnd[4] << 8) + | ((unsigned long)sc->cmnd[5] << 0))*512UL; if (sc->use_sg > 0) simscsi_sg_readwrite(sc, mode, offset); else -- GitLab From ce6e71ad4866dad366be135b024b776c00ec9ec8 Mon Sep 17 00:00:00 2001 From: "Siddha, Suresh B" Date: Tue, 4 Oct 2005 16:35:31 -0700 Subject: [PATCH 0403/1519] [IA64] fix siblings field value in /proc/cpuinfo Fix the "siblings" field value in /proc/cpuinfo so that it now shows the number of siblings as seen by OS, instead of what is available from hardware perspective. Signed-off-by: Suresh Siddha Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 1f5c26dbe705..0ca6ef103952 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -526,7 +526,7 @@ show_cpuinfo (struct seq_file *m, void *v) c->itc_freq / 1000000, c->itc_freq % 1000000, lpj*HZ/500000, (lpj*HZ/5000) % 100); #ifdef CONFIG_SMP - seq_printf(m, "siblings : %u\n", c->num_log); + seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum])); if (c->threads_per_core > 1 || c->cores_per_socket > 1) seq_printf(m, "physical id: %u\n" -- GitLab From 9c184a073bfd650cc791956d6ca79725bb682716 Mon Sep 17 00:00:00 2001 From: "H. J. Lu" Date: Fri, 7 Oct 2005 11:01:19 -0700 Subject: [PATCH 0404/1519] [IA64] Fix 2.6 kernel for the new ia64 assembler The new ia64 assembler uses slot 1 for the offset of a long (2-slot) instruction and the old assembler uses slot 2. The 2.6 kernel assumes slot 2 and won't boot when the new assembler is used: http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433 This patch will work with either slot 1 or 2. Patch provided by H.J. Lu Signed-off-by: Tony Luck --- arch/ia64/kernel/patch.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c index 367804a605fa..6a4ac7d70b35 100644 --- a/arch/ia64/kernel/patch.c +++ b/arch/ia64/kernel/patch.c @@ -64,22 +64,30 @@ ia64_patch (u64 insn_addr, u64 mask, u64 val) void ia64_patch_imm64 (u64 insn_addr, u64 val) { - ia64_patch(insn_addr, + /* The assembler may generate offset pointing to either slot 1 + or slot 2 for a long (2-slot) instruction, occupying slots 1 + and 2. */ + insn_addr &= -16UL; + ia64_patch(insn_addr + 2, 0x01fffefe000UL, ( ((val & 0x8000000000000000UL) >> 27) /* bit 63 -> 36 */ | ((val & 0x0000000000200000UL) << 0) /* bit 21 -> 21 */ | ((val & 0x00000000001f0000UL) << 6) /* bit 16 -> 22 */ | ((val & 0x000000000000ff80UL) << 20) /* bit 7 -> 27 */ | ((val & 0x000000000000007fUL) << 13) /* bit 0 -> 13 */)); - ia64_patch(insn_addr - 1, 0x1ffffffffffUL, val >> 22); + ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22); } void ia64_patch_imm60 (u64 insn_addr, u64 val) { - ia64_patch(insn_addr, + /* The assembler may generate offset pointing to either slot 1 + or slot 2 for a long (2-slot) instruction, occupying slots 1 + and 2. */ + insn_addr &= -16UL; + ia64_patch(insn_addr + 2, 0x011ffffe000UL, ( ((val & 0x0800000000000000UL) >> 23) /* bit 59 -> 36 */ | ((val & 0x00000000000fffffUL) << 13) /* bit 0 -> 13 */)); - ia64_patch(insn_addr - 1, 0x1fffffffffcUL, val >> 18); + ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18); } /* -- GitLab From dc565b525d4b7091a3abb6616d210c8a896a11d7 Mon Sep 17 00:00:00 2001 From: "hawkes@sgi.com" Date: Mon, 10 Oct 2005 08:43:26 -0700 Subject: [PATCH 0405/1519] [IA64] wider use of for_each_cpu_mask() in arch/ia64 In arch/ia64 change the explicit use of for-loops and NR_CPUS into the general for_each_cpu() or for_each_online_cpu() constructs, as appropriate. This widens the scope of potential future optimizations of the general constructs, as well as takes advantage of the existing optimizations of first_cpu() and next_cpu(). Signed-off-by: John Hawkes Signed-off-by: Tony Luck --- arch/ia64/kernel/irq.c | 12 ++++++------ arch/ia64/kernel/module.c | 6 +++--- arch/ia64/kernel/smp.c | 10 +++++----- arch/ia64/kernel/smpboot.c | 6 +++--- arch/ia64/mm/tlb.c | 5 +++-- 5 files changed, 20 insertions(+), 19 deletions(-) diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 205d98028261..d33244c32759 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -57,9 +57,9 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; jtypename); seq_printf(p, " %s", action->name); diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index f1aca7cffd12..7a2f0a798d12 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -947,8 +947,8 @@ void percpu_modcopy (void *pcpudst, const void *src, unsigned long size) { unsigned int i; - for (i = 0; i < NR_CPUS; i++) - if (cpu_possible(i)) - memcpy(pcpudst + __per_cpu_offset[i], src, size); + for_each_cpu(i) { + memcpy(pcpudst + __per_cpu_offset[i], src, size); + } } #endif /* CONFIG_SMP */ diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 0166a9847095..657ac99a451c 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -185,8 +185,8 @@ send_IPI_allbutself (int op) { unsigned int i; - for (i = 0; i < NR_CPUS; i++) { - if (cpu_online(i) && i != smp_processor_id()) + for_each_online_cpu(i) { + if (i != smp_processor_id()) send_IPI_single(i, op); } } @@ -199,9 +199,9 @@ send_IPI_all (int op) { int i; - for (i = 0; i < NR_CPUS; i++) - if (cpu_online(i)) - send_IPI_single(i, op); + for_each_online_cpu(i) { + send_IPI_single(i, op); + } } /* diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 7d72c0d872b3..400a48987124 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -694,9 +694,9 @@ smp_cpus_done (unsigned int dummy) * Allow the user to impress friends. */ - for (cpu = 0; cpu < NR_CPUS; cpu++) - if (cpu_online(cpu)) - bogosum += cpu_data(cpu)->loops_per_jiffy; + for_each_online_cpu(cpu) { + bogosum += cpu_data(cpu)->loops_per_jiffy; + } printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n", (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100); diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index 464557e4ed82..987fb754d6ad 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -77,9 +77,10 @@ wrap_mmu_context (struct mm_struct *mm) /* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */ { int cpu = get_cpu(); /* prevent preemption/migration */ - for (i = 0; i < NR_CPUS; ++i) - if (cpu_online(i) && (i != cpu)) + for_each_online_cpu(i) { + if (i != cpu) per_cpu(ia64_need_tlb_flush, i) = 1; + } put_cpu(); } local_flush_tlb_all(); -- GitLab From ddf6d0a00cbb4ad6d4fb4200cc911bb9389174c1 Mon Sep 17 00:00:00 2001 From: "hawkes@sgi.com" Date: Thu, 13 Oct 2005 12:01:18 -0700 Subject: [PATCH 0406/1519] [IA64] another place to use for_each_cpu_mask() in arch/ia64 In arch/ia64 change the explicit use of a for-loop using NR_CPUS into the general for_each_online_cpu() construct. This widens the scope of potential future optimizations of the general constructs, as well as takes advantage of the existing optimizations of first_cpu() and next_cpu(), which is advantageous when the true CPU count is much smaller than NR_CPUS. Signed-off-by: John Hawkes Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index d0a5106fba24..52c47da17246 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -508,9 +508,7 @@ ia64_mca_wakeup_all(void) int cpu; /* Clear the Rendez checkin flag for all cpus */ - for(cpu = 0; cpu < NR_CPUS; cpu++) { - if (!cpu_online(cpu)) - continue; + for_each_online_cpu(cpu) { if (ia64_mc_info.imi_rendez_checkin[cpu] == IA64_MCA_RENDEZ_CHECKIN_DONE) ia64_mca_wakeup(cpu); } -- GitLab From 7cc656efb560cda66b5ed48444cad7556ea4fe99 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 25 Oct 2005 15:13:54 -0700 Subject: [PATCH 0407/1519] [IB] simplify mad_rmpp.c:alloc_response_msg() Change alloc_response_msg() in mad_rmpp.c to return the struct it allocates directly (or an error code a la ERR_PTR), rather than returning a status and passing the struct back in a pointer param. This simplifies the code and gets rid of warnings like drivers/infiniband/core/mad_rmpp.c: In function nack_recv: drivers/infiniband/core/mad_rmpp.c:192: warning: msg may be used uninitialized in this function with newer versions of gcc. Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad_rmpp.c | 31 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index ba112cd5f93c..3249e1d8c07b 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -151,28 +151,27 @@ static void ack_recv(struct mad_rmpp_recv *rmpp_recv, ib_free_send_mad(msg); } -static int alloc_response_msg(struct ib_mad_agent *agent, - struct ib_mad_recv_wc *recv_wc, - struct ib_mad_send_buf **msg) +static struct ib_mad_send_buf *alloc_response_msg(struct ib_mad_agent *agent, + struct ib_mad_recv_wc *recv_wc) { - struct ib_mad_send_buf *m; + struct ib_mad_send_buf *msg; struct ib_ah *ah; ah = ib_create_ah_from_wc(agent->qp->pd, recv_wc->wc, recv_wc->recv_buf.grh, agent->port_num); if (IS_ERR(ah)) - return PTR_ERR(ah); + return (void *) ah; - m = ib_create_send_mad(agent, recv_wc->wc->src_qp, - recv_wc->wc->pkey_index, 1, - IB_MGMT_RMPP_HDR, IB_MGMT_RMPP_DATA, GFP_KERNEL); - if (IS_ERR(m)) { + msg = ib_create_send_mad(agent, recv_wc->wc->src_qp, + recv_wc->wc->pkey_index, 1, + IB_MGMT_RMPP_HDR, IB_MGMT_RMPP_DATA, + GFP_KERNEL); + if (IS_ERR(msg)) ib_destroy_ah(ah); - return PTR_ERR(m); - } - m->ah = ah; - *msg = m; - return 0; + else + msg->ah = ah; + + return msg; } void ib_rmpp_send_handler(struct ib_mad_send_wc *mad_send_wc) @@ -191,8 +190,8 @@ static void nack_recv(struct ib_mad_agent_private *agent, struct ib_rmpp_mad *rmpp_mad; int ret; - ret = alloc_response_msg(&agent->agent, recv_wc, &msg); - if (ret) + msg = alloc_response_msg(&agent->agent, recv_wc); + if (IS_ERR(msg)) return; rmpp_mad = msg->mad; -- GitLab From e54af724c1ae3530c95135157776c9be65cdb747 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 25 Oct 2005 14:07:43 -0500 Subject: [PATCH 0408/1519] [IA64-SGI] fixes for XPC disengage and open/close protocol This patch addresses a few issues with the open/close protocol that were revealed by the newly added disengage functionality combined with more extensive testing. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc.h | 21 ++-- arch/ia64/sn/kernel/xpc_channel.c | 117 +++++++++++++++------- arch/ia64/sn/kernel/xpc_main.c | 146 ++++++++++++++++++++-------- arch/ia64/sn/kernel/xpc_partition.c | 8 +- include/asm-ia64/sn/xp.h | 6 +- 5 files changed, 208 insertions(+), 90 deletions(-) diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index 565822ab3d08..ae51d7b4c42e 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -417,6 +417,9 @@ struct xpc_channel { atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */ wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */ + u8 delayed_IPI_flags; /* IPI flags received, but delayed */ + /* action until channel disconnected */ + /* queue of msg senders who want to be notified when msg received */ atomic_t n_to_notify; /* #of msg senders to notify */ @@ -478,7 +481,8 @@ struct xpc_channel { #define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */ #define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */ -#define XPC_C_WDISCONNECT 0x00008000 /* waiting for channel disconnect */ +#define XPC_C_DISCONNECTCALLOUT 0x00008000 /* chan disconnected callout made */ +#define XPC_C_WDISCONNECT 0x00010000 /* waiting for channel disconnect */ @@ -508,13 +512,13 @@ struct xpc_partition { int reason_line; /* line# deactivation initiated from */ int reactivate_nasid; /* nasid in partition to reactivate */ - unsigned long disengage_request_timeout; /* timeout in XPC_TICKS */ + unsigned long disengage_request_timeout; /* timeout in jiffies */ struct timer_list disengage_request_timer; /* XPC infrastructure referencing and teardown control */ - volatile u8 setup_state; /* infrastructure setup state */ + volatile u8 setup_state; /* infrastructure setup state */ wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */ atomic_t references; /* #of references to infrastructure */ @@ -604,7 +608,7 @@ struct xpc_partition { /* number of seconds to wait for other partitions to disengage */ -#define XPC_DISENGAGE_REQUEST_TIMELIMIT 90 +#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90 /* interval in seconds to print 'waiting disengagement' messages */ #define XPC_DISENGAGE_PRINTMSG_INTERVAL 10 @@ -618,20 +622,18 @@ struct xpc_partition { extern struct xpc_registration xpc_registrations[]; -/* >>> found in xpc_main.c only */ +/* found in xpc_main.c */ extern struct device *xpc_part; extern struct device *xpc_chan; +extern int xpc_disengage_request_timelimit; extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *); extern void xpc_dropped_IPI_check(struct xpc_partition *); +extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int); extern void xpc_disconnect_wait(int); -/* found in xpc_main.c and efi-xpc.c */ -extern void xpc_activate_partition(struct xpc_partition *); - - /* found in xpc_partition.c */ extern int xpc_exiting; extern struct xpc_vars *xpc_vars; @@ -1077,6 +1079,7 @@ xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag, /* given an AMO variable and a channel#, get its associated IPI flags */ #define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff)) +#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8)) #define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f) #define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010) diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index 195ac1b8e262..abf4fc2a87bb 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -792,11 +792,20 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) "reason=%d\n", ch->number, ch->partid, ch->reason); } - /* wake the thread that is waiting for this channel to disconnect */ if (ch->flags & XPC_C_WDISCONNECT) { spin_unlock_irqrestore(&ch->lock, *irq_flags); up(&ch->wdisconnect_sema); spin_lock_irqsave(&ch->lock, *irq_flags); + + } else if (ch->delayed_IPI_flags) { + if (part->act_state != XPC_P_DEACTIVATING) { + /* time to take action on any delayed IPI flags */ + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number, + ch->delayed_IPI_flags); + spin_unlock(&part->IPI_lock); + } + ch->delayed_IPI_flags = 0; } } @@ -818,6 +827,19 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, spin_lock_irqsave(&ch->lock, irq_flags); +again: + + if ((ch->flags & XPC_C_DISCONNECTED) && + (ch->flags & XPC_C_WDISCONNECT)) { + /* + * Delay processing IPI flags until thread waiting disconnect + * has had a chance to see that the channel is disconnected. + */ + ch->delayed_IPI_flags |= IPI_flags; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + if (IPI_flags & XPC_IPI_CLOSEREQUEST) { @@ -843,14 +865,22 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, /* both sides have finished disconnecting */ xpc_process_disconnect(ch, &irq_flags); + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); + goto again; } if (ch->flags & XPC_C_DISCONNECTED) { - // >>> explain this section - if (!(IPI_flags & XPC_IPI_OPENREQUEST)) { - DBUG_ON(part->act_state != - XPC_P_DEACTIVATING); + if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, + ch_number) & XPC_IPI_OPENREQUEST)) { + + DBUG_ON(ch->delayed_IPI_flags != 0); + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch_number, + XPC_IPI_CLOSEREQUEST); + spin_unlock(&part->IPI_lock); + } spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -880,9 +910,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, } XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags); - } else { - xpc_process_disconnect(ch, &irq_flags); + + DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; } + + xpc_process_disconnect(ch, &irq_flags); } @@ -898,7 +932,20 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, } DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST)); - DBUG_ON(!(ch->flags & XPC_C_RCLOSEREQUEST)); + + if (!(ch->flags & XPC_C_RCLOSEREQUEST)) { + if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number) + & XPC_IPI_CLOSEREQUEST)) { + + DBUG_ON(ch->delayed_IPI_flags != 0); + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch_number, XPC_IPI_CLOSEREPLY); + spin_unlock(&part->IPI_lock); + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } ch->flags |= XPC_C_RCLOSEREPLY; @@ -916,8 +963,14 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, "channel=%d\n", args->msg_size, args->local_nentries, ch->partid, ch->number); - if ((ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) || - part->act_state == XPC_P_DEACTIVATING) { + if (part->act_state == XPC_P_DEACTIVATING || + (ch->flags & XPC_C_ROPENREQUEST)) { + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) { + ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST; spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -931,8 +984,11 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, * msg_size = size of channel's messages in bytes * local_nentries = remote partition's local_nentries */ - DBUG_ON(args->msg_size == 0); - DBUG_ON(args->local_nentries == 0); + if (args->msg_size == 0 || args->local_nentries == 0) { + /* assume OPENREQUEST was delayed by mistake */ + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING); ch->remote_nentries = args->local_nentries; @@ -970,7 +1026,13 @@ xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, spin_unlock_irqrestore(&ch->lock, irq_flags); return; } - DBUG_ON(!(ch->flags & XPC_C_OPENREQUEST)); + if (!(ch->flags & XPC_C_OPENREQUEST)) { + XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError, + &irq_flags); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST)); DBUG_ON(ch->flags & XPC_C_CONNECTED); @@ -1024,8 +1086,8 @@ xpc_connect_channel(struct xpc_channel *ch) struct xpc_registration *registration = &xpc_registrations[ch->number]; - if (down_interruptible(®istration->sema) != 0) { - return xpcInterrupted; + if (down_trylock(®istration->sema) != 0) { + return xpcRetry; } if (!XPC_CHANNEL_REGISTERED(ch->number)) { @@ -1445,19 +1507,11 @@ xpc_initiate_connect(int ch_number) if (xpc_part_ref(part)) { ch = &part->channels[ch_number]; - if (!(ch->flags & XPC_C_DISCONNECTING)) { - DBUG_ON(ch->flags & XPC_C_OPENREQUEST); - DBUG_ON(ch->flags & XPC_C_CONNECTED); - DBUG_ON(ch->flags & XPC_C_SETUP); - - /* - * Initiate the establishment of a connection - * on the newly registered channel to the - * remote partition. - */ - xpc_wakeup_channel_mgr(part); - } - + /* + * Initiate the establishment of a connection on the + * newly registered channel to the remote partition. + */ + xpc_wakeup_channel_mgr(part); xpc_part_deref(part); } } @@ -1467,9 +1521,6 @@ xpc_initiate_connect(int ch_number) void xpc_connected_callout(struct xpc_channel *ch) { - unsigned long irq_flags; - - /* let the registerer know that a connection has been established */ if (ch->func != NULL) { @@ -1482,10 +1533,6 @@ xpc_connected_callout(struct xpc_channel *ch) dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, " "partid=%d, channel=%d\n", ch->partid, ch->number); } - - spin_lock_irqsave(&ch->lock, irq_flags); - ch->flags |= XPC_C_CONNECTCALLOUT; - spin_unlock_irqrestore(&ch->lock, irq_flags); } diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index feece200b3c3..db349c6d4c58 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -91,6 +91,10 @@ static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; static int xpc_hb_check_min_interval = 10; static int xpc_hb_check_max_interval = 120; +int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT; +static int xpc_disengage_request_min_timelimit = 0; +static int xpc_disengage_request_max_timelimit = 120; + static ctl_table xpc_sys_xpc_hb_dir[] = { { 1, @@ -129,6 +133,19 @@ static ctl_table xpc_sys_xpc_dir[] = { 0555, xpc_sys_xpc_hb_dir }, + { + 2, + "disengage_request_timelimit", + &xpc_disengage_request_timelimit, + sizeof(int), + 0644, + NULL, + &proc_dointvec_minmax, + &sysctl_intvec, + NULL, + &xpc_disengage_request_min_timelimit, + &xpc_disengage_request_max_timelimit + }, {0} }; static ctl_table xpc_sys_dir[] = { @@ -153,11 +170,11 @@ static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); static unsigned long xpc_hb_check_timeout; -/* used as an indication of when the xpc_hb_checker thread is inactive */ -static DECLARE_MUTEX_LOCKED(xpc_hb_checker_inactive); +/* notification that the xpc_hb_checker thread has exited */ +static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited); -/* used as an indication of when the xpc_discovery thread is inactive */ -static DECLARE_MUTEX_LOCKED(xpc_discovery_inactive); +/* notification that the xpc_discovery thread has exited */ +static DECLARE_MUTEX_LOCKED(xpc_discovery_exited); static struct timer_list xpc_hb_timer; @@ -181,7 +198,7 @@ xpc_timeout_partition_disengage_request(unsigned long data) struct xpc_partition *part = (struct xpc_partition *) data; - DBUG_ON(XPC_TICKS < part->disengage_request_timeout); + DBUG_ON(jiffies < part->disengage_request_timeout); (void) xpc_partition_disengaged(part); @@ -292,8 +309,8 @@ xpc_hb_checker(void *ignore) dev_dbg(xpc_part, "heartbeat checker is exiting\n"); - /* mark this thread as inactive */ - up(&xpc_hb_checker_inactive); + /* mark this thread as having exited */ + up(&xpc_hb_checker_exited); return 0; } @@ -312,8 +329,8 @@ xpc_initiate_discovery(void *ignore) dev_dbg(xpc_part, "discovery thread is exiting\n"); - /* mark this thread as inactive */ - up(&xpc_discovery_inactive); + /* mark this thread as having exited */ + up(&xpc_discovery_exited); return 0; } @@ -703,6 +720,7 @@ xpc_daemonize_kthread(void *args) struct xpc_partition *part = &xpc_partitions[partid]; struct xpc_channel *ch; int n_needed; + unsigned long irq_flags; daemonize("xpc%02dc%d", partid, ch_number); @@ -713,11 +731,14 @@ xpc_daemonize_kthread(void *args) ch = &part->channels[ch_number]; if (!(ch->flags & XPC_C_DISCONNECTING)) { - DBUG_ON(!(ch->flags & XPC_C_CONNECTED)); /* let registerer know that connection has been established */ - if (atomic_read(&ch->kthreads_assigned) == 1) { + spin_lock_irqsave(&ch->lock, irq_flags); + if (!(ch->flags & XPC_C_CONNECTCALLOUT)) { + ch->flags |= XPC_C_CONNECTCALLOUT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + xpc_connected_callout(ch); /* @@ -732,14 +753,23 @@ xpc_daemonize_kthread(void *args) !(ch->flags & XPC_C_DISCONNECTING)) { xpc_activate_kthreads(ch, n_needed); } + } else { + spin_unlock_irqrestore(&ch->lock, irq_flags); } xpc_kthread_waitmsgs(part, ch); } if (atomic_dec_return(&ch->kthreads_assigned) == 0) { - if (ch->flags & XPC_C_CONNECTCALLOUT) { + spin_lock_irqsave(&ch->lock, irq_flags); + if ((ch->flags & XPC_C_CONNECTCALLOUT) && + !(ch->flags & XPC_C_DISCONNECTCALLOUT)) { + ch->flags |= XPC_C_DISCONNECTCALLOUT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + xpc_disconnecting_callout(ch); + } else { + spin_unlock_irqrestore(&ch->lock, irq_flags); } if (atomic_dec_return(&part->nchannels_engaged) == 0) { xpc_mark_partition_disengaged(part); @@ -780,9 +810,29 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) while (needed-- > 0) { + + /* + * The following is done on behalf of the newly created + * kthread. That kthread is responsible for doing the + * counterpart to the following before it exits. + */ + (void) xpc_part_ref(part); + xpc_msgqueue_ref(ch); + if (atomic_inc_return(&ch->kthreads_assigned) == 1 && + atomic_inc_return(&part->nchannels_engaged) == 1) { + xpc_mark_partition_engaged(part); + } + pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0); if (pid < 0) { /* the fork failed */ + if (atomic_dec_return(&ch->kthreads_assigned) == 0 && + atomic_dec_return(&part->nchannels_engaged) == 0) { + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } + xpc_msgqueue_deref(ch); + xpc_part_deref(part); if (atomic_read(&ch->kthreads_assigned) < ch->kthreads_idle_limit) { @@ -802,18 +852,6 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed) break; } - /* - * The following is done on behalf of the newly created - * kthread. That kthread is responsible for doing the - * counterpart to the following before it exits. - */ - (void) xpc_part_ref(part); - xpc_msgqueue_ref(ch); - if (atomic_inc_return(&ch->kthreads_assigned) == 1) { - if (atomic_inc_return(&part->nchannels_engaged) == 1) { - xpc_mark_partition_engaged(part); - } - } ch->kthreads_created++; // >>> temporary debug only!!! } } @@ -826,26 +864,49 @@ xpc_disconnect_wait(int ch_number) partid_t partid; struct xpc_partition *part; struct xpc_channel *ch; + int wakeup_channel_mgr; /* now wait for all callouts to the caller's function to cease */ for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { part = &xpc_partitions[partid]; - if (xpc_part_ref(part)) { - ch = &part->channels[ch_number]; + if (!xpc_part_ref(part)) { + continue; + } - if (ch->flags & XPC_C_WDISCONNECT) { - if (!(ch->flags & XPC_C_DISCONNECTED)) { - (void) down(&ch->wdisconnect_sema); - } - spin_lock_irqsave(&ch->lock, irq_flags); - ch->flags &= ~XPC_C_WDISCONNECT; - spin_unlock_irqrestore(&ch->lock, irq_flags); - } + ch = &part->channels[ch_number]; + if (!(ch->flags & XPC_C_WDISCONNECT)) { xpc_part_deref(part); + continue; } + + (void) down(&ch->wdisconnect_sema); + + spin_lock_irqsave(&ch->lock, irq_flags); + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); + wakeup_channel_mgr = 0; + + if (ch->delayed_IPI_flags) { + if (part->act_state != XPC_P_DEACTIVATING) { + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch->number, ch->delayed_IPI_flags); + spin_unlock(&part->IPI_lock); + wakeup_channel_mgr = 1; + } + ch->delayed_IPI_flags = 0; + } + + ch->flags &= ~XPC_C_WDISCONNECT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + + if (wakeup_channel_mgr) { + xpc_wakeup_channel_mgr(part); + } + + xpc_part_deref(part); } } @@ -873,11 +934,11 @@ xpc_do_exit(enum xpc_retval reason) /* ignore all incoming interrupts */ free_irq(SGI_XPC_ACTIVATE, NULL); - /* wait for the discovery thread to mark itself inactive */ - down(&xpc_discovery_inactive); + /* wait for the discovery thread to exit */ + down(&xpc_discovery_exited); - /* wait for the heartbeat checker thread to mark itself inactive */ - down(&xpc_hb_checker_inactive); + /* wait for the heartbeat checker thread to exit */ + down(&xpc_hb_checker_exited); /* sleep for a 1/3 of a second or so */ @@ -893,6 +954,7 @@ xpc_do_exit(enum xpc_retval reason) for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { part = &xpc_partitions[partid]; + if (xpc_partition_disengaged(part) && part->act_state == XPC_P_INACTIVE) { continue; @@ -930,7 +992,7 @@ xpc_do_exit(enum xpc_retval reason) /* now it's time to eliminate our heartbeat */ del_timer_sync(&xpc_hb_timer); - DBUG_ON(xpc_vars->heartbeating_to_mask == 0); + DBUG_ON(xpc_vars->heartbeating_to_mask != 0); /* take ourselves off of the reboot_notifier_list */ (void) unregister_reboot_notifier(&xpc_reboot_notifier); @@ -1134,7 +1196,7 @@ xpc_init(void) dev_err(xpc_part, "failed while forking discovery thread\n"); /* mark this new thread as a non-starter */ - up(&xpc_discovery_inactive); + up(&xpc_discovery_exited); xpc_do_exit(xpcUnloading); return -EBUSY; @@ -1172,3 +1234,7 @@ module_param(xpc_hb_check_interval, int, 0); MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " "heartbeat checks."); +module_param(xpc_disengage_request_timelimit, int, 0); +MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait " + "for disengage request to complete."); + diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 79a0fc4c860c..958488f55699 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -578,7 +578,7 @@ xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version, /* - * Prior code has determine the nasid which generated an IPI. Inspect + * Prior code has determined the nasid which generated an IPI. Inspect * that nasid to determine if its partition needs to be activated or * deactivated. * @@ -942,14 +942,14 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, /* set a timelimit on the disengage request */ part->disengage_request_timeout = jiffies + - (XPC_DISENGAGE_REQUEST_TIMELIMIT * HZ); + (xpc_disengage_request_timelimit * HZ); part->disengage_request_timer.expires = part->disengage_request_timeout; add_timer(&part->disengage_request_timer); } - dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", partid, - reason); + dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", + XPC_PARTID(part), reason); xpc_partition_going_down(part, reason); } diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h index f3052a54932b..30312be31206 100644 --- a/include/asm-ia64/sn/xp.h +++ b/include/asm-ia64/sn/xp.h @@ -225,7 +225,9 @@ enum xpc_retval { xpcDisconnecting, /* 49: channel disconnecting (closing) */ - xpcUnknownReason /* 50: unknown reason -- must be last in list */ + xpcOpenCloseError, /* 50: channel open/close protocol error */ + + xpcUnknownReason /* 51: unknown reason -- must be last in list */ }; @@ -350,7 +352,7 @@ typedef void (*xpc_notify_func)(enum xpc_retval reason, partid_t partid, * * The 'func' field points to the function to call when aynchronous * notification is required for such events as: a connection established/lost, - * or an incomming message received, or an error condition encountered. A + * or an incoming message received, or an error condition encountered. A * non-NULL 'func' field indicates that there is an active registration for * the channel. */ -- GitLab From 4b38fcd4858204cb3667eb7b3aca48ffb1002f05 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 25 Oct 2005 14:09:51 -0500 Subject: [PATCH 0409/1519] [IA64-SGI] XPC changes to support more than 2k nasids XPC needs to be changed to support up to 16k nasids on an SGI Altix system. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc.h | 77 +++++++++++---- arch/ia64/sn/kernel/xpc_main.c | 8 +- arch/ia64/sn/kernel/xpc_partition.c | 140 ++++++++++++++++------------ 3 files changed, 141 insertions(+), 84 deletions(-) diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index ae51d7b4c42e..33df1b3758b6 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -68,29 +68,58 @@ /* - * Reserved Page provided by SAL. + * the reserved page * - * SAL provides one page per partition of reserved memory. When SAL - * initialization is complete, SAL_signature, SAL_version, partid, - * part_nasids, and mach_nasids are set. + * SAL reserves one page of memory per partition for XPC. Though a full page + * in length (16384 bytes), its starting address is not page aligned, but it + * is cacheline aligned. The reserved page consists of the following: + * + * reserved page header + * + * The first cacheline of the reserved page contains the header + * (struct xpc_rsvd_page). Before SAL initialization has completed, + * SAL has set up the following fields of the reserved page header: + * SAL_signature, SAL_version, partid, and nasids_size. The other + * fields are set up by XPC. (xpc_rsvd_page points to the local + * partition's reserved page.) + * + * part_nasids mask + * mach_nasids mask + * + * SAL also sets up two bitmaps (or masks), one that reflects the actual + * nasids in this partition (part_nasids), and the other that reflects + * the actual nasids in the entire machine (mach_nasids). We're only + * interested in the even numbered nasids (which contain the processors + * and/or memory), so we only need half as many bits to represent the + * nasids. The part_nasids mask is located starting at the first cacheline + * following the reserved page header. The mach_nasids mask follows right + * after the part_nasids mask. The size in bytes of each mask is reflected + * by the reserved page header field 'nasids_size'. (Local partition's + * mask pointers are xpc_part_nasids and xpc_mach_nasids.) + * + * vars + * vars part + * + * Immediately following the mach_nasids mask are the XPC variables + * required by other partitions. First are those that are generic to all + * partitions (vars), followed on the next available cacheline by those + * which are partition specific (vars part). These are setup by XPC. + * (Local partition's vars pointers are xpc_vars and xpc_vars_part.) * * Note: Until vars_pa is set, the partition XPC code has not been initialized. */ struct xpc_rsvd_page { - u64 SAL_signature; /* SAL unique signature */ - u64 SAL_version; /* SAL specified version */ - u8 partid; /* partition ID from SAL */ + u64 SAL_signature; /* SAL: unique signature */ + u64 SAL_version; /* SAL: version */ + u8 partid; /* SAL: partition ID */ u8 version; - u8 pad[6]; /* pad to u64 align */ + u8 pad1[6]; /* align to next u64 in cacheline */ volatile u64 vars_pa; - struct timespec stamp; /* time when reserved page was initialized */ - u64 part_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; - u64 mach_nasids[XP_NASID_MASK_WORDS] ____cacheline_aligned; + struct timespec stamp; /* time when reserved page was setup by XPC */ + u64 pad2[9]; /* align to last u64 in cacheline */ + u64 nasids_size; /* SAL: size of each nasid mask in bytes */ }; -#define XPC_RSVD_PAGE_ALIGNED_SIZE \ - (L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))) - #define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */ #define XPC_SUPPORTS_RP_STAMP(_version) \ @@ -142,8 +171,6 @@ struct xpc_vars { AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ }; -#define XPC_VARS_ALIGNED_SIZE (L1_CACHE_ALIGN(sizeof(struct xpc_vars))) - #define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */ #define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ @@ -184,7 +211,7 @@ xpc_disallow_hb(partid_t partid, struct xpc_vars *vars) /* * The AMOs page consists of a number of AMO variables which are divided into * four groups, The first two groups are used to identify an IRQ's sender. - * These two groups consist of 64 and 16 AMO variables respectively. The last + * These two groups consist of 64 and 128 AMO variables respectively. The last * two groups, consisting of just one AMO variable each, are used to identify * the remote partitions that are currently engaged (from the viewpoint of * the XPC running on the remote partition). @@ -233,6 +260,16 @@ struct xpc_vars_part { #define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */ +/* the reserved page sizes and offsets */ + +#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)) +#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars)) + +#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE) +#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words) +#define XPC_RP_VARS(_rp) ((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words) +#define XPC_RP_VARS_PART(_rp) (struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE) + /* * Functions registered by add_timer() or called by kernel_thread() only @@ -1147,9 +1184,9 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) * cacheable mapping for the entire region. This will prevent speculative * reading of cached copies of our lines from being issued which will cause * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * (XP_MAX_PARTITIONS) AMO variables for message notification and an - * additional 16 (XP_NASID_MASK_WORDS) AMO variables for partition activation - * and 2 AMO variables for partition deactivation. + * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an + * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition + * activation and 2 AMO variables for partition deactivation. */ static inline AMO_t * xpc_IPI_init(int index) diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index db349c6d4c58..38f2c699192c 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -1049,11 +1049,11 @@ xpc_init(void) /* * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng - * both a partition's reserved page and its XPC variables. Its size was - * based on the size of a reserved page. So we need to ensure that the - * XPC variables will fit as well. + * various portions of a partition's reserved page. Its size is based + * on the size of the reserved page header and part_nasids mask. So we + * need to ensure that the other items will fit as well. */ - if (XPC_VARS_ALIGNED_SIZE > XPC_RSVD_PAGE_ALIGNED_SIZE) { + if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) { dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n"); return -EPERM; } diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 958488f55699..6bb1091f2a4d 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -47,13 +47,16 @@ static u64 xpc_sh2_IPI_access3; u64 xpc_prot_vec[MAX_COMPACT_NODES]; -/* this partition's reserved page */ +/* this partition's reserved page pointers */ struct xpc_rsvd_page *xpc_rsvd_page; - -/* this partition's XPC variables (within the reserved page) */ +static u64 *xpc_part_nasids; +static u64 *xpc_mach_nasids; struct xpc_vars *xpc_vars; struct xpc_vars_part *xpc_vars_part; +static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */ +static int xp_nasid_mask_words; /* actual size in words of nasid mask */ + /* * For performance reasons, each entry of xpc_partitions[] is cacheline @@ -65,15 +68,16 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; /* - * Generic buffer used to store a local copy of the remote partitions - * reserved page or XPC variables. + * Generic buffer used to store a local copy of portions of a remote + * partition's reserved page (either its header and part_nasids mask, + * or its vars). * * xpc_discovery runs only once and is a seperate thread that is * very likely going to be processing in parallel with receiving * interrupts. */ -char ____cacheline_aligned - xpc_remote_copy_buffer[XPC_RSVD_PAGE_ALIGNED_SIZE]; +char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE + + XP_NASID_MASK_BYTES]; /* @@ -136,7 +140,7 @@ xpc_rsvd_page_init(void) { struct xpc_rsvd_page *rp; AMO_t *amos_page; - u64 rp_pa, next_cl, nasid_array = 0; + u64 rp_pa, nasid_array = 0; int i, ret; @@ -144,7 +148,8 @@ xpc_rsvd_page_init(void) rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0), (u64) xpc_remote_copy_buffer, - XPC_RSVD_PAGE_ALIGNED_SIZE); + XPC_RP_HEADER_SIZE + + L1_CACHE_BYTES); if (rp_pa == 0) { dev_err(xpc_part, "SAL failed to locate the reserved page\n"); return NULL; @@ -159,12 +164,19 @@ xpc_rsvd_page_init(void) rp->version = XPC_RP_VERSION; - /* - * Place the XPC variables on the cache line following the - * reserved page structure. - */ - next_cl = (u64) rp + XPC_RSVD_PAGE_ALIGNED_SIZE; - xpc_vars = (struct xpc_vars *) next_cl; + /* establish the actual sizes of the nasid masks */ + if (rp->SAL_version == 1) { + /* SAL_version 1 didn't set the nasids_size field */ + rp->nasids_size = 128; + } + xp_nasid_mask_bytes = rp->nasids_size; + xp_nasid_mask_words = xp_nasid_mask_bytes / 8; + + /* setup the pointers to the various items in the reserved page */ + xpc_part_nasids = XPC_RP_PART_NASIDS(rp); + xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp); + xpc_vars = XPC_RP_VARS(rp); + xpc_vars_part = XPC_RP_VARS_PART(rp); /* * Before clearing xpc_vars, see if a page of AMOs had been previously @@ -216,26 +228,23 @@ xpc_rsvd_page_init(void) amos_page = (AMO_t *) TO_AMO((u64) amos_page); } + /* clear xpc_vars */ memset(xpc_vars, 0, sizeof(struct xpc_vars)); - /* - * Place the XPC per partition specific variables on the cache line - * following the XPC variables structure. - */ - next_cl += XPC_VARS_ALIGNED_SIZE; - memset((u64 *) next_cl, 0, sizeof(struct xpc_vars_part) * - XP_MAX_PARTITIONS); - xpc_vars_part = (struct xpc_vars_part *) next_cl; - xpc_vars->vars_part_pa = __pa(next_cl); - xpc_vars->version = XPC_V_VERSION; xpc_vars->act_nasid = cpuid_to_nasid(0); xpc_vars->act_phys_cpuid = cpu_physical_id(0); + xpc_vars->vars_part_pa = __pa(xpc_vars_part); + xpc_vars->amos_page_pa = ia64_tpa((u64) amos_page); xpc_vars->amos_page = amos_page; /* save for next load of XPC */ + /* clear xpc_vars_part */ + memset((u64 *) xpc_vars_part, 0, sizeof(struct xpc_vars_part) * + XP_MAX_PARTITIONS); + /* initialize the activate IRQ related AMO variables */ - for (i = 0; i < XP_NASID_MASK_WORDS; i++) { + for (i = 0; i < xp_nasid_mask_words; i++) { (void) xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); } @@ -243,10 +252,7 @@ xpc_rsvd_page_init(void) (void) xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); (void) xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); - /* export AMO page's physical address to other partitions */ - xpc_vars->amos_page_pa = ia64_tpa((u64) xpc_vars->amos_page); - - /* timestamp of when reserved page was initialized */ + /* timestamp of when reserved page was setup by XPC */ rp->stamp = CURRENT_TIME; /* @@ -406,7 +412,7 @@ xpc_check_remote_hb(void) /* pull the remote_hb cache line */ bres = xp_bte_copy(part->remote_vars_pa, ia64_tpa((u64) remote_vars), - XPC_VARS_ALIGNED_SIZE, + XPC_RP_VARS_SIZE, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bres != BTE_SUCCESS) { XPC_DEACTIVATE_PARTITION(part, @@ -434,10 +440,11 @@ xpc_check_remote_hb(void) /* - * Get a copy of the remote partition's rsvd page. + * Get a copy of a portion of the remote partition's rsvd page. * * remote_rp points to a buffer that is cacheline aligned for BTE copies and - * assumed to be of size XPC_RSVD_PAGE_ALIGNED_SIZE. + * is large enough to contain a copy of their reserved page header and + * part_nasids mask. */ static enum xpc_retval xpc_get_remote_rp(int nasid, u64 *discovered_nasids, @@ -449,16 +456,17 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* get the reserved page's physical address */ *remote_rp_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp, - XPC_RSVD_PAGE_ALIGNED_SIZE); + XPC_RP_HEADER_SIZE + + xp_nasid_mask_bytes); if (*remote_rp_pa == 0) { return xpcNoRsvdPageAddr; } - /* pull over the reserved page structure */ + /* pull over the reserved page header and part_nasids mask */ bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp), - XPC_RSVD_PAGE_ALIGNED_SIZE, + XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bres != BTE_SUCCESS) { return xpc_map_bte_errors(bres); @@ -466,8 +474,11 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, if (discovered_nasids != NULL) { - for (i = 0; i < XP_NASID_MASK_WORDS; i++) { - discovered_nasids[i] |= remote_rp->part_nasids[i]; + u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp); + + + for (i = 0; i < xp_nasid_mask_words; i++) { + discovered_nasids[i] |= remote_part_nasids[i]; } } @@ -494,10 +505,10 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* - * Get a copy of the remote partition's XPC variables. + * Get a copy of the remote partition's XPC variables from the reserved page. * * remote_vars points to a buffer that is cacheline aligned for BTE copies and - * assumed to be of size XPC_VARS_ALIGNED_SIZE. + * assumed to be of size XPC_RP_VARS_SIZE. */ static enum xpc_retval xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) @@ -513,7 +524,7 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) /* pull over the cross partition variables */ bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars), - XPC_VARS_ALIGNED_SIZE, + XPC_RP_VARS_SIZE, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bres != BTE_SUCCESS) { return xpc_map_bte_errors(bres); @@ -778,14 +789,13 @@ xpc_identify_act_IRQ_sender(void) u64 nasid; /* remote nasid */ int n_IRQs_detected = 0; AMO_t *act_amos; - struct xpc_rsvd_page *rp = (struct xpc_rsvd_page *) xpc_rsvd_page; act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; /* scan through act AMO variable looking for non-zero entries */ - for (word = 0; word < XP_NASID_MASK_WORDS; word++) { + for (word = 0; word < xp_nasid_mask_words; word++) { if (xpc_exiting) { break; @@ -807,7 +817,7 @@ xpc_identify_act_IRQ_sender(void) * remote nasid in our reserved pages machine mask. * This is used in the event of module reload. */ - rp->mach_nasids[word] |= nasid_mask; + xpc_mach_nasids[word] |= nasid_mask; /* locate the nasid(s) which sent interrupts */ @@ -992,6 +1002,7 @@ xpc_discovery(void) u64 remote_rp_pa; u64 remote_vars_pa; int region; + int region_size; int max_regions; int nasid; struct xpc_rsvd_page *rp; @@ -1001,7 +1012,8 @@ xpc_discovery(void) enum xpc_retval ret; - remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RSVD_PAGE_ALIGNED_SIZE, + remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE + + xp_nasid_mask_bytes, GFP_KERNEL, &remote_rp_base); if (remote_rp == NULL) { return; @@ -1009,13 +1021,13 @@ xpc_discovery(void) remote_vars = (struct xpc_vars *) remote_rp; - discovered_nasids = kmalloc(sizeof(u64) * XP_NASID_MASK_WORDS, + discovered_nasids = kmalloc(sizeof(u64) * xp_nasid_mask_words, GFP_KERNEL); if (discovered_nasids == NULL) { kfree(remote_rp_base); return; } - memset(discovered_nasids, 0, sizeof(u64) * XP_NASID_MASK_WORDS); + memset(discovered_nasids, 0, sizeof(u64) * xp_nasid_mask_words); rp = (struct xpc_rsvd_page *) xpc_rsvd_page; @@ -1024,11 +1036,19 @@ xpc_discovery(void) * nodes that can comprise an access protection grouping. The access * protection is in regards to memory, IOI and IPI. */ -//>>> move the next two #defines into either include/asm-ia64/sn/arch.h or -//>>> include/asm-ia64/sn/addrs.h -#define SH1_MAX_REGIONS 64 -#define SH2_MAX_REGIONS 256 - max_regions = is_shub2() ? SH2_MAX_REGIONS : SH1_MAX_REGIONS; + max_regions = 64; + region_size = sn_region_size; + + switch (region_size) { + case 128: + max_regions *= 2; + case 64: + max_regions *= 2; + case 32: + max_regions *= 2; + region_size = 16; + DBUG_ON(!is_shub2()); + } for (region = 0; region < max_regions; region++) { @@ -1038,8 +1058,8 @@ xpc_discovery(void) dev_dbg(xpc_part, "searching region %d\n", region); - for (nasid = (region * sn_region_size * 2); - nasid < ((region + 1) * sn_region_size * 2); + for (nasid = (region * region_size * 2); + nasid < ((region + 1) * region_size * 2); nasid += 2) { if ((volatile int) xpc_exiting) { @@ -1049,14 +1069,14 @@ xpc_discovery(void) dev_dbg(xpc_part, "checking nasid %d\n", nasid); - if (XPC_NASID_IN_ARRAY(nasid, rp->part_nasids)) { + if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) { dev_dbg(xpc_part, "PROM indicates Nasid %d is " "part of the local partition; skipping " "region\n", nasid); break; } - if (!(XPC_NASID_IN_ARRAY(nasid, rp->mach_nasids))) { + if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) { dev_dbg(xpc_part, "PROM indicates Nasid %d was " "not on Numa-Link network at reset\n", nasid); @@ -1178,12 +1198,12 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask) return xpcPartitionDown; } - part_nasid_pa = part->remote_rp_pa + - (u64) &((struct xpc_rsvd_page *) 0)->part_nasids; + memset(nasid_mask, 0, XP_NASID_MASK_BYTES); + + part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa); bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask), - L1_CACHE_ALIGN(XP_NASID_MASK_BYTES), - (BTE_NOTIFY | BTE_WACQUIRE), NULL); + xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL); return xpc_map_bte_errors(bte_res); } -- GitLab From 279290294662d4a35d209fb7d7c46523cfa3d63d Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 25 Oct 2005 14:11:53 -0500 Subject: [PATCH 0410/1519] [IA64-SGI] cleanup the way XPC locates the reserved page Eliminate the passing in of a scratch buffer used for locating the reserved page setup for XPC. Signed-off-by: Dean Nelson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/xpc_partition.c | 39 +++++++++++++++++++---------- 1 file changed, 26 insertions(+), 13 deletions(-) diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index 6bb1091f2a4d..ce5a37ff4388 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -85,13 +85,16 @@ char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE + * for that nasid. This function returns 0 on any error. */ static u64 -xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size) +xpc_get_rsvd_page_pa(int nasid) { bte_result_t bte_res; s64 status; u64 cookie = 0; u64 rp_pa = nasid; /* seed with nasid */ u64 len = 0; + u64 buf = buf; + u64 buf_len = 0; + void *buf_base = NULL; while (1) { @@ -107,13 +110,22 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size) break; } - if (len > buf_size) { - dev_err(xpc_part, "len (=0x%016lx) > buf_size\n", len); - status = SALRET_ERROR; - break; + if (L1_CACHE_ALIGN(len) > buf_len) { + if (buf_base != NULL) { + kfree(buf_base); + } + buf_len = L1_CACHE_ALIGN(len); + buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len, + GFP_KERNEL, &buf_base); + if (buf_base == NULL) { + dev_err(xpc_part, "unable to kmalloc " + "len=0x%016lx\n", buf_len); + status = SALRET_ERROR; + break; + } } - bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_size, + bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (bte_res != BTE_SUCCESS) { dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res); @@ -122,6 +134,10 @@ xpc_get_rsvd_page_pa(int nasid, u64 buf, u64 buf_size) } } + if (buf_base != NULL) { + kfree(buf_base); + } + if (status != SALRET_OK) { rp_pa = 0; } @@ -146,10 +162,9 @@ xpc_rsvd_page_init(void) /* get the local reserved page's address */ - rp_pa = xpc_get_rsvd_page_pa(cnodeid_to_nasid(0), - (u64) xpc_remote_copy_buffer, - XPC_RP_HEADER_SIZE + - L1_CACHE_BYTES); + preempt_disable(); + rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id())); + preempt_enable(); if (rp_pa == 0) { dev_err(xpc_part, "SAL failed to locate the reserved page\n"); return NULL; @@ -455,9 +470,7 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* get the reserved page's physical address */ - *remote_rp_pa = xpc_get_rsvd_page_pa(nasid, (u64) remote_rp, - XPC_RP_HEADER_SIZE + - xp_nasid_mask_bytes); + *remote_rp_pa = xpc_get_rsvd_page_pa(nasid); if (*remote_rp_pa == 0) { return xpcNoRsvdPageAddr; } -- GitLab From e7f98dbbb89b68b23a5115708412a820a713fbf1 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Tue, 25 Oct 2005 17:34:19 -0500 Subject: [PATCH 0411/1519] [IA64-SGI] fix bte_copy() calling get_nasid() while preemptible bte_copy() calls calls get_nasid(), which will get flagged if preemption if enabled. raw_smp_processor_id() is used instead. It is OK if we migrate off node. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/bte.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index 45854c637e9c..d71f4de44f79 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -87,7 +87,7 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification) unsigned long irq_flags; unsigned long itc_end = 0; int nasid_to_try[MAX_NODES_TO_TRY]; - int my_nasid = get_nasid(); + int my_nasid = cpuid_to_nasid(raw_smp_processor_id()); int bte_if_index, nasid_index; int bte_first, btes_per_node = BTES_PER_NODE; -- GitLab From 900e0143a575406146ac531fcb91790f166ce52f Mon Sep 17 00:00:00 2001 From: Patrick Caulfield Date: Tue, 11 Oct 2005 08:22:33 +0100 Subject: [PATCH 0412/1519] [DECNET]: Remove some redundant ifdeffed code Signed-off-by: Patrick Caulfield Signed-off-by: Steven Whitehouse Signed-off-by: David S. Miller Signed-off-by: Arnaldo Carvalho de Melo --- net/decnet/af_decnet.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 1186dc44cdff..3f25cadccddd 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -719,22 +719,9 @@ static int dn_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) if (saddr->sdn_flags & ~SDF_WILD) return -EINVAL; -#if 1 if (!capable(CAP_NET_BIND_SERVICE) && (saddr->sdn_objnum || (saddr->sdn_flags & SDF_WILD))) return -EACCES; -#else - /* - * Maybe put the default actions in the default security ops for - * dn_prot_sock ? Would be nice if the capable call would go there - * too. - */ - if (security_dn_prot_sock(saddr) && - !capable(CAP_NET_BIND_SERVICE) || - saddr->sdn_objnum || (saddr->sdn_flags & SDF_WILD)) - return -EACCES; -#endif - if (!(saddr->sdn_flags & SDF_WILD)) { if (dn_ntohs(saddr->sdn_nodeaddrl)) { -- GitLab From 670c02c2bfd2c8a305a90f5285409a7b0a8fd630 Mon Sep 17 00:00:00 2001 From: John Hawkes Date: Thu, 13 Oct 2005 09:30:31 -0700 Subject: [PATCH 0413/1519] [NET]: Wider use of for_each_*cpu() In 'net' change the explicit use of for-loops and NR_CPUS into the general for_each_cpu() or for_each_online_cpu() constructs, as appropriate. This widens the scope of potential future optimizations of the general constructs, as well as takes advantage of the existing optimizations of first_cpu() and next_cpu(), which is advantageous when the true CPU count is much smaller than NR_CPUS. Signed-off-by: John Hawkes Signed-off-by: David S. Miller Signed-off-by: Arnaldo Carvalho de Melo --- net/core/neighbour.c | 5 +---- net/core/pktgen.c | 5 +---- net/ipv4/icmp.c | 5 +---- net/ipv4/proc.c | 4 +--- net/ipv6/icmp.c | 9 ++------- net/ipv6/proc.c | 4 +--- net/sctp/proc.c | 4 +--- 7 files changed, 8 insertions(+), 28 deletions(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 1dcf7fa1f0fe..e68700f950a5 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1625,12 +1625,9 @@ static int neightbl_fill_info(struct neigh_table *tbl, struct sk_buff *skb, memset(&ndst, 0, sizeof(ndst)); - for (cpu = 0; cpu < NR_CPUS; cpu++) { + for_each_cpu(cpu) { struct neigh_statistics *st; - if (!cpu_possible(cpu)) - continue; - st = per_cpu_ptr(tbl->stats, cpu); ndst.ndts_allocs += st->allocs; ndst.ndts_destroys += st->destroys; diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 5f043d346694..00116d8b3b28 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3065,12 +3065,9 @@ static int __init pg_init(void) /* Register us to receive netdevice events */ register_netdevice_notifier(&pktgen_notifier_block); - for (cpu = 0; cpu < NR_CPUS ; cpu++) { + for_each_online_cpu(cpu) { char buf[30]; - if (!cpu_online(cpu)) - continue; - sprintf(buf, "kpktgend_%i", cpu); pktgen_create_thread(buf, cpu); } diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 90dca711ac9f..175e093ec564 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -1108,12 +1108,9 @@ void __init icmp_init(struct net_proto_family *ops) struct inet_sock *inet; int i; - for (i = 0; i < NR_CPUS; i++) { + for_each_cpu(i) { int err; - if (!cpu_possible(i)) - continue; - err = sock_create_kern(PF_INET, SOCK_RAW, IPPROTO_ICMP, &per_cpu(__icmp_socket, i)); diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index f7943ba1f43c..a65e508fbd40 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -90,9 +90,7 @@ fold_field(void *mib[], int offt) unsigned long res = 0; int i; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_possible(i)) - continue; + for_each_cpu(i) { res += *(((unsigned long *) per_cpu_ptr(mib[0], i)) + offt); res += *(((unsigned long *) per_cpu_ptr(mib[1], i)) + offt); } diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index b7185fb3377c..23e540365a14 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -700,10 +700,7 @@ int __init icmpv6_init(struct net_proto_family *ops) struct sock *sk; int err, i, j; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_possible(i)) - continue; - + for_each_cpu(i) { err = sock_create_kern(PF_INET6, SOCK_RAW, IPPROTO_ICMPV6, &per_cpu(__icmpv6_socket, i)); if (err < 0) { @@ -749,9 +746,7 @@ void icmpv6_cleanup(void) { int i; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_possible(i)) - continue; + for_each_cpu(i) { sock_release(per_cpu(__icmpv6_socket, i)); } inet6_del_protocol(&icmpv6_protocol, IPPROTO_ICMPV6); diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index 334a5967831e..50a13e75d70e 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -140,9 +140,7 @@ fold_field(void *mib[], int offt) unsigned long res = 0; int i; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_possible(i)) - continue; + for_each_cpu(i) { res += *(((unsigned long *)per_cpu_ptr(mib[0], i)) + offt); res += *(((unsigned long *)per_cpu_ptr(mib[1], i)) + offt); } diff --git a/net/sctp/proc.c b/net/sctp/proc.c index b74f7772b576..6e4dc28874d7 100644 --- a/net/sctp/proc.c +++ b/net/sctp/proc.c @@ -69,9 +69,7 @@ fold_field(void *mib[], int nr) unsigned long res = 0; int i; - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_possible(i)) - continue; + for_each_cpu(i) { res += *((unsigned long *) (((void *) per_cpu_ptr(mib[0], i)) + sizeof (unsigned long) * nr)); -- GitLab From b7c8921bf1a8a9c1907b1eeb029d3f167be226f3 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 14 Oct 2005 15:26:34 -0700 Subject: [PATCH 0414/1519] [PKTGEN]: Sleeping function called under lock pktgen is calling kmalloc GFP_KERNEL and vmalloc with lock held. The simplest fix is to turn the lock into a semaphore, since the thread lock is only used for admin control from user context. Signed-off-by: Stephen Hemminger Signed-off-by: Robert Olsson Signed-off-by: David S. Miller Signed-off-by: Arnaldo Carvalho de Melo --- net/core/pktgen.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 00116d8b3b28..8a90bf79261a 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -177,8 +177,8 @@ #define T_REMDEV (1<<3) /* Remove all devs */ /* Locks */ -#define thread_lock() spin_lock(&_thread_lock) -#define thread_unlock() spin_unlock(&_thread_lock) +#define thread_lock() down(&pktgen_sem) +#define thread_unlock() up(&pktgen_sem) /* If lock -- can be removed after some work */ #define if_lock(t) spin_lock(&(t->if_lock)); @@ -503,7 +503,7 @@ static int pg_delay_d = 0; static int pg_clone_skb_d = 0; static int debug = 0; -static DEFINE_SPINLOCK(_thread_lock); +static DECLARE_MUTEX(pktgen_sem); static struct pktgen_thread *pktgen_threads = NULL; static char module_fname[128]; -- GitLab From 2845b63b504b051a9cb4d78bed8b3594451a1f6f Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 14 Oct 2005 15:29:48 -0700 Subject: [PATCH 0415/1519] [PKTGEN]: Use kzalloc These are cleanup patches for pktgen that can go in 2.6.15 Can use kzalloc in a couple of places. Signed-off-by: Stephen Hemminger Signed-off-by: Robert Olsson Signed-off-by: David S. Miller Signed-off-by: Arnaldo Carvalho de Melo --- net/core/pktgen.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 8a90bf79261a..b597ef1771f4 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2869,12 +2869,10 @@ static int pktgen_add_device(struct pktgen_thread *t, const char* ifname) if( (pkt_dev = __pktgen_NN_threads(ifname, FIND)) == NULL) { - pkt_dev = kmalloc(sizeof(struct pktgen_dev), GFP_KERNEL); + pkt_dev = kzalloc(sizeof(struct pktgen_dev), GFP_KERNEL); if (!pkt_dev) return -ENOMEM; - memset(pkt_dev, 0, sizeof(struct pktgen_dev)); - pkt_dev->flows = vmalloc(MAX_CFLOWS*sizeof(struct flow_state)); if (pkt_dev->flows == NULL) { kfree(pkt_dev); @@ -2958,13 +2956,12 @@ static int pktgen_create_thread(const char* name, int cpu) return -EINVAL; } - t = (struct pktgen_thread*)(kmalloc(sizeof(struct pktgen_thread), GFP_KERNEL)); + t = kzalloc(sizeof(struct pktgen_thread), GFP_KERNEL); if (!t) { printk("pktgen: ERROR: out of memory, can't create new thread.\n"); return -ENOMEM; } - memset(t, 0, sizeof(struct pktgen_thread)); strcpy(t->name, name); spin_lock_init(&t->if_lock); t->cpu = cpu; -- GitLab From b4099fab75d5e3eae8d207c0d7159e2f3348686e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 14 Oct 2005 15:32:22 -0700 Subject: [PATCH 0416/1519] [PKTGEN]: Spelling and white space Fix some cosmetic issues. Indentation, spelling errors, and some whitespace. Signed-off-by: Stephen Hemminger Signed-off-by: Robert Olsson Signed-off-by: David S. Miller Signed-off-by: Arnaldo Carvalho de Melo --- net/core/pktgen.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index b597ef1771f4..ad053c8cb7fc 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -75,7 +75,7 @@ * By design there should only be *one* "controlling" process. In practice * multiple write accesses gives unpredictable result. Understood by "write" * to /proc gives result code thats should be read be the "writer". - * For pratical use this should be no problem. + * For practical use this should be no problem. * * Note when adding devices to a specific CPU there good idea to also assign * /proc/irq/XX/smp_affinity so TX-interrupts gets bound to the same CPU. @@ -96,7 +96,7 @@ * New xmit() return, do_div and misc clean up by Stephen Hemminger * 040923 * - * Rany Dunlap fixed u64 printk compiler waring + * Randy Dunlap fixed u64 printk compiler waring * * Remove FCS from BW calculation. Lennert Buytenhek * New time handling. Lennert Buytenhek 041213 @@ -244,7 +244,7 @@ struct pktgen_dev { __u32 seq_num; int clone_skb; /* Use multiple SKBs during packet gen. If this number - * is greater than 1, then that many coppies of the same + * is greater than 1, then that many copies of the same * packet will be sent before a new packet is allocated. * For instance, if you want to send 1024 identical packets * before creating a new packet, set clone_skb to 1024. @@ -396,7 +396,7 @@ static inline s64 divremdi3(s64 x, s64 y, int type) /* End of hacks to deal with 64-bit math on x86 */ -/** Convert to miliseconds */ +/** Convert to milliseconds */ static inline __u64 tv_to_ms(const struct timeval* tv) { __u64 ms = tv->tv_usec / 1000; @@ -425,7 +425,7 @@ static inline __u64 pg_div64(__u64 n, __u64 base) { __u64 tmp = n; /* - * How do we know if the architectrure we are running on + * How do we know if the architecture we are running on * supports division with 64 bit base? * */ @@ -544,12 +544,12 @@ static ssize_t proc_pgctrl_read(struct file* file, char __user * buf, len = strlen(data); if(len > count) { - len =-EFAULT; + len = -EFAULT; goto out; } if (copy_to_user(buf, data, len)) { - len =-EFAULT; + len = -EFAULT; goto out; } @@ -578,7 +578,7 @@ static ssize_t proc_pgctrl_write(struct file* file,const char __user * buf, goto out; } if (copy_from_user(data, buf, count)) { - err =-EFAULT; + err = -EFAULT; goto out_free; } data[count-1] = 0; /* Make string */ @@ -1702,7 +1702,7 @@ static void spin(struct pktgen_dev *pkt_dev, __u64 spin_until_us) start = now = getCurUs(); printk(KERN_INFO "sleeping for %d\n", (int)(spin_until_us - now)); while (now < spin_until_us) { - /* TODO: optimise sleeping behavior */ + /* TODO: optimize sleeping behavior */ if (spin_until_us - now > jiffies_to_usecs(1)+1) schedule_timeout_interruptible(1); else if (spin_until_us - now > 100) { @@ -2361,7 +2361,7 @@ static void pktgen_stop_all_threads_ifs(void) pktgen_stop(t); t = t->next; } - thread_unlock(); + thread_unlock(); } static int thread_is_running(struct pktgen_thread *t ) @@ -2555,7 +2555,7 @@ static void pktgen_rem_thread(struct pktgen_thread *t) if (strlen(t->fname)) remove_proc_entry(t->fname, NULL); - thread_lock(); + thread_lock(); if (tmp == t) pktgen_threads = tmp->next; @@ -2929,7 +2929,7 @@ static struct pktgen_thread *pktgen_find_thread(const char* name) { struct pktgen_thread *t = NULL; - thread_lock(); + thread_lock(); t = pktgen_threads; while (t) { -- GitLab From d50a6b56f0f239cf061630c85add121dc3555339 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 14 Oct 2005 15:42:33 -0700 Subject: [PATCH 0417/1519] [PKTGEN]: proc interface revision The code to handle the /proc interface can be cleaned up in several places: * use seq_file for read * don't need to remember all the filenames separately * use for_online_cpu's * don't vmalloc a buffer for small command from user. Committer note: This patch clashed with John Hawkes's "[NET]: Wider use of for_each_*cpu()", so I fixed it up manually. Signed-off-by: Stephen Hemminger Signed-off-by: Robert Olsson Signed-off-by: David S. Miller Signed-off-by: Arnaldo Carvalho de Melo --- net/core/pktgen.c | 472 +++++++++++++++++++++------------------------- 1 file changed, 215 insertions(+), 257 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index ad053c8cb7fc..7fc3e9e28c34 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -137,6 +137,7 @@ #include #include #include +#include #include #include #include @@ -151,7 +152,7 @@ #include -#define VERSION "pktgen v2.62: Packet Generator for packet performance testing.\n" +#define VERSION "pktgen v2.63: Packet Generator for packet performance testing.\n" /* #define PG_DEBUG(a) a */ #define PG_DEBUG(a) @@ -186,7 +187,9 @@ /* Used to help with determining the pkts on receive */ #define PKTGEN_MAGIC 0xbe9be955 -#define PG_PROC_DIR "net/pktgen" +#define PG_PROC_DIR "pktgen" +#define PGCTRL "pgctrl" +static struct proc_dir_entry *pg_proc_dir = NULL; #define MAX_CFLOWS 65536 @@ -202,11 +205,8 @@ struct pktgen_dev { * Try to keep frequent/infrequent used vars. separated. */ - char ifname[32]; - struct proc_dir_entry *proc_ent; + char ifname[IFNAMSIZ]; char result[512]; - /* proc file names */ - char fname[80]; struct pktgen_thread* pg_thread; /* the owner */ struct pktgen_dev *next; /* Used for chaining in the thread's run-queue */ @@ -330,8 +330,6 @@ struct pktgen_thread { struct pktgen_dev *if_list; /* All device here */ struct pktgen_thread* next; char name[32]; - char fname[128]; /* name of proc file */ - struct proc_dir_entry *proc_ent; char result[512]; u32 max_before_softirq; /* We'll call do_softirq to prevent starvation. */ @@ -473,16 +471,6 @@ static inline __u64 tv_diff(const struct timeval* a, const struct timeval* b) static char version[] __initdata = VERSION; -static ssize_t proc_pgctrl_read(struct file* file, char __user * buf, size_t count, loff_t *ppos); -static ssize_t proc_pgctrl_write(struct file* file, const char __user * buf, size_t count, loff_t *ppos); -static int proc_if_read(char *buf , char **start, off_t offset, int len, int *eof, void *data); - -static int proc_thread_read(char *buf , char **start, off_t offset, int len, int *eof, void *data); -static int proc_if_write(struct file *file, const char __user *user_buffer, unsigned long count, void *data); -static int proc_thread_write(struct file *file, const char __user *user_buffer, unsigned long count, void *data); -static int create_proc_dir(void); -static int remove_proc_dir(void); - static int pktgen_remove_device(struct pktgen_thread* t, struct pktgen_dev *i); static int pktgen_add_device(struct pktgen_thread* t, const char* ifname); static struct pktgen_thread* pktgen_find_thread(const char* name); @@ -506,80 +494,38 @@ static int debug = 0; static DECLARE_MUTEX(pktgen_sem); static struct pktgen_thread *pktgen_threads = NULL; -static char module_fname[128]; -static struct proc_dir_entry *module_proc_ent = NULL; - static struct notifier_block pktgen_notifier_block = { .notifier_call = pktgen_device_event, }; -static struct file_operations pktgen_fops = { - .read = proc_pgctrl_read, - .write = proc_pgctrl_write, - /* .ioctl = pktgen_ioctl, later maybe */ -}; - /* * /proc handling functions * */ -static struct proc_dir_entry *pg_proc_dir = NULL; -static int proc_pgctrl_read_eof=0; - -static ssize_t proc_pgctrl_read(struct file* file, char __user * buf, - size_t count, loff_t *ppos) +static int pgctrl_show(struct seq_file *seq, void *v) { - char data[200]; - int len = 0; - - if(proc_pgctrl_read_eof) { - proc_pgctrl_read_eof=0; - len = 0; - goto out; - } - - sprintf(data, "%s", VERSION); - - len = strlen(data); - - if(len > count) { - len = -EFAULT; - goto out; - } - - if (copy_to_user(buf, data, len)) { - len = -EFAULT; - goto out; - } - - *ppos += len; - proc_pgctrl_read_eof=1; /* EOF next call */ - - out: - return len; + seq_puts(seq, VERSION); + return 0; } -static ssize_t proc_pgctrl_write(struct file* file,const char __user * buf, - size_t count, loff_t *ppos) +static ssize_t pgctrl_write(struct file* file,const char __user * buf, + size_t count, loff_t *ppos) { - char *data = NULL; int err = 0; + char data[128]; if (!capable(CAP_NET_ADMIN)){ err = -EPERM; goto out; } - data = (void*)vmalloc ((unsigned int)count); + if (count > sizeof(data)) + count = sizeof(data); - if(!data) { - err = -ENOMEM; - goto out; - } if (copy_from_user(data, buf, count)) { err = -EFAULT; - goto out_free; + goto out; } data[count-1] = 0; /* Make string */ @@ -594,31 +540,40 @@ static ssize_t proc_pgctrl_write(struct file* file,const char __user * buf, err = count; - out_free: - vfree (data); out: return err; } -static int proc_if_read(char *buf , char **start, off_t offset, - int len, int *eof, void *data) +static int pgctrl_open(struct inode *inode, struct file *file) +{ + return single_open(file, pgctrl_show, PDE(inode)->data); +} + +static struct file_operations pktgen_fops = { + .owner = THIS_MODULE, + .open = pgctrl_open, + .read = seq_read, + .llseek = seq_lseek, + .write = pgctrl_write, + .release = single_release, +}; + +static int pktgen_if_show(struct seq_file *seq, void *v) { - char *p; int i; - struct pktgen_dev *pkt_dev = (struct pktgen_dev*)(data); + struct pktgen_dev *pkt_dev = seq->private; __u64 sa; __u64 stopped; __u64 now = getCurUs(); - p = buf; - p += sprintf(p, "Params: count %llu min_pkt_size: %u max_pkt_size: %u\n", - (unsigned long long) pkt_dev->count, - pkt_dev->min_pkt_size, pkt_dev->max_pkt_size); + seq_printf(seq, "Params: count %llu min_pkt_size: %u max_pkt_size: %u\n", + (unsigned long long) pkt_dev->count, + pkt_dev->min_pkt_size, pkt_dev->max_pkt_size); - p += sprintf(p, " frags: %d delay: %u clone_skb: %d ifname: %s\n", - pkt_dev->nfrags, 1000*pkt_dev->delay_us+pkt_dev->delay_ns, pkt_dev->clone_skb, pkt_dev->ifname); + seq_printf(seq, " frags: %d delay: %u clone_skb: %d ifname: %s\n", + pkt_dev->nfrags, 1000*pkt_dev->delay_us+pkt_dev->delay_ns, pkt_dev->clone_skb, pkt_dev->ifname); - p += sprintf(p, " flows: %u flowlen: %u\n", pkt_dev->cflows, pkt_dev->lflow); + seq_printf(seq, " flows: %u flowlen: %u\n", pkt_dev->cflows, pkt_dev->lflow); if(pkt_dev->flags & F_IPV6) { @@ -626,19 +581,19 @@ static int proc_if_read(char *buf , char **start, off_t offset, fmt_ip6(b1, pkt_dev->in6_saddr.s6_addr); fmt_ip6(b2, pkt_dev->min_in6_saddr.s6_addr); fmt_ip6(b3, pkt_dev->max_in6_saddr.s6_addr); - p += sprintf(p, " saddr: %s min_saddr: %s max_saddr: %s\n", b1, b2, b3); + seq_printf(seq, " saddr: %s min_saddr: %s max_saddr: %s\n", b1, b2, b3); fmt_ip6(b1, pkt_dev->in6_daddr.s6_addr); fmt_ip6(b2, pkt_dev->min_in6_daddr.s6_addr); fmt_ip6(b3, pkt_dev->max_in6_daddr.s6_addr); - p += sprintf(p, " daddr: %s min_daddr: %s max_daddr: %s\n", b1, b2, b3); + seq_printf(seq, " daddr: %s min_daddr: %s max_daddr: %s\n", b1, b2, b3); } else - p += sprintf(p, " dst_min: %s dst_max: %s\n src_min: %s src_max: %s\n", - pkt_dev->dst_min, pkt_dev->dst_max, pkt_dev->src_min, pkt_dev->src_max); + seq_printf(seq," dst_min: %s dst_max: %s\n src_min: %s src_max: %s\n", + pkt_dev->dst_min, pkt_dev->dst_max, pkt_dev->src_min, pkt_dev->src_max); - p += sprintf(p, " src_mac: "); + seq_puts(seq, " src_mac: "); if ((pkt_dev->src_mac[0] == 0) && (pkt_dev->src_mac[1] == 0) && @@ -648,89 +603,89 @@ static int proc_if_read(char *buf , char **start, off_t offset, (pkt_dev->src_mac[5] == 0)) for (i = 0; i < 6; i++) - p += sprintf(p, "%02X%s", pkt_dev->odev->dev_addr[i], i == 5 ? " " : ":"); + seq_printf(seq, "%02X%s", pkt_dev->odev->dev_addr[i], i == 5 ? " " : ":"); else for (i = 0; i < 6; i++) - p += sprintf(p, "%02X%s", pkt_dev->src_mac[i], i == 5 ? " " : ":"); + seq_printf(seq, "%02X%s", pkt_dev->src_mac[i], i == 5 ? " " : ":"); - p += sprintf(p, "dst_mac: "); + seq_printf(seq, "dst_mac: "); for (i = 0; i < 6; i++) - p += sprintf(p, "%02X%s", pkt_dev->dst_mac[i], i == 5 ? "\n" : ":"); + seq_printf(seq, "%02X%s", pkt_dev->dst_mac[i], i == 5 ? "\n" : ":"); - p += sprintf(p, " udp_src_min: %d udp_src_max: %d udp_dst_min: %d udp_dst_max: %d\n", - pkt_dev->udp_src_min, pkt_dev->udp_src_max, pkt_dev->udp_dst_min, - pkt_dev->udp_dst_max); + seq_printf(seq, " udp_src_min: %d udp_src_max: %d udp_dst_min: %d udp_dst_max: %d\n", + pkt_dev->udp_src_min, pkt_dev->udp_src_max, pkt_dev->udp_dst_min, + pkt_dev->udp_dst_max); - p += sprintf(p, " src_mac_count: %d dst_mac_count: %d \n Flags: ", - pkt_dev->src_mac_count, pkt_dev->dst_mac_count); + seq_printf(seq, " src_mac_count: %d dst_mac_count: %d \n Flags: ", + pkt_dev->src_mac_count, pkt_dev->dst_mac_count); if (pkt_dev->flags & F_IPV6) - p += sprintf(p, "IPV6 "); + seq_printf(seq, "IPV6 "); if (pkt_dev->flags & F_IPSRC_RND) - p += sprintf(p, "IPSRC_RND "); + seq_printf(seq, "IPSRC_RND "); if (pkt_dev->flags & F_IPDST_RND) - p += sprintf(p, "IPDST_RND "); + seq_printf(seq, "IPDST_RND "); if (pkt_dev->flags & F_TXSIZE_RND) - p += sprintf(p, "TXSIZE_RND "); + seq_printf(seq, "TXSIZE_RND "); if (pkt_dev->flags & F_UDPSRC_RND) - p += sprintf(p, "UDPSRC_RND "); + seq_printf(seq, "UDPSRC_RND "); if (pkt_dev->flags & F_UDPDST_RND) - p += sprintf(p, "UDPDST_RND "); + seq_printf(seq, "UDPDST_RND "); if (pkt_dev->flags & F_MACSRC_RND) - p += sprintf(p, "MACSRC_RND "); + seq_printf(seq, "MACSRC_RND "); if (pkt_dev->flags & F_MACDST_RND) - p += sprintf(p, "MACDST_RND "); + seq_printf(seq, "MACDST_RND "); - p += sprintf(p, "\n"); + seq_puts(seq, "\n"); sa = pkt_dev->started_at; stopped = pkt_dev->stopped_at; if (pkt_dev->running) stopped = now; /* not really stopped, more like last-running-at */ - p += sprintf(p, "Current:\n pkts-sofar: %llu errors: %llu\n started: %lluus stopped: %lluus idle: %lluus\n", - (unsigned long long) pkt_dev->sofar, - (unsigned long long) pkt_dev->errors, - (unsigned long long) sa, - (unsigned long long) stopped, - (unsigned long long) pkt_dev->idle_acc); + seq_printf(seq, "Current:\n pkts-sofar: %llu errors: %llu\n started: %lluus stopped: %lluus idle: %lluus\n", + (unsigned long long) pkt_dev->sofar, + (unsigned long long) pkt_dev->errors, + (unsigned long long) sa, + (unsigned long long) stopped, + (unsigned long long) pkt_dev->idle_acc); - p += sprintf(p, " seq_num: %d cur_dst_mac_offset: %d cur_src_mac_offset: %d\n", - pkt_dev->seq_num, pkt_dev->cur_dst_mac_offset, pkt_dev->cur_src_mac_offset); + seq_printf(seq, " seq_num: %d cur_dst_mac_offset: %d cur_src_mac_offset: %d\n", + pkt_dev->seq_num, pkt_dev->cur_dst_mac_offset, + pkt_dev->cur_src_mac_offset); if(pkt_dev->flags & F_IPV6) { char b1[128], b2[128]; fmt_ip6(b1, pkt_dev->cur_in6_daddr.s6_addr); fmt_ip6(b2, pkt_dev->cur_in6_saddr.s6_addr); - p += sprintf(p, " cur_saddr: %s cur_daddr: %s\n", b2, b1); + seq_printf(seq, " cur_saddr: %s cur_daddr: %s\n", b2, b1); } else - p += sprintf(p, " cur_saddr: 0x%x cur_daddr: 0x%x\n", - pkt_dev->cur_saddr, pkt_dev->cur_daddr); + seq_printf(seq, " cur_saddr: 0x%x cur_daddr: 0x%x\n", + pkt_dev->cur_saddr, pkt_dev->cur_daddr); - p += sprintf(p, " cur_udp_dst: %d cur_udp_src: %d\n", - pkt_dev->cur_udp_dst, pkt_dev->cur_udp_src); + seq_printf(seq, " cur_udp_dst: %d cur_udp_src: %d\n", + pkt_dev->cur_udp_dst, pkt_dev->cur_udp_src); - p += sprintf(p, " flows: %u\n", pkt_dev->nflows); + seq_printf(seq, " flows: %u\n", pkt_dev->nflows); if (pkt_dev->result[0]) - p += sprintf(p, "Result: %s\n", pkt_dev->result); + seq_printf(seq, "Result: %s\n", pkt_dev->result); else - p += sprintf(p, "Result: Idle\n"); - *eof = 1; + seq_printf(seq, "Result: Idle\n"); - return p - buf; + return 0; } @@ -802,13 +757,14 @@ static int strn_len(const char __user *user_buffer, unsigned int maxlen) return i; } -static int proc_if_write(struct file *file, const char __user *user_buffer, - unsigned long count, void *data) +static ssize_t pktgen_if_write(struct file *file, const char __user *user_buffer, + size_t count, loff_t *offset) { + struct seq_file *seq = (struct seq_file *) file->private_data; + struct pktgen_dev *pkt_dev = seq->private; int i = 0, max, len; char name[16], valstr[32]; unsigned long value = 0; - struct pktgen_dev *pkt_dev = (struct pktgen_dev*)(data); char* pg_result = NULL; int tmp = 0; char buf[128]; @@ -849,7 +805,8 @@ static int proc_if_write(struct file *file, const char __user *user_buffer, if (copy_from_user(tb, user_buffer, count)) return -EFAULT; tb[count] = 0; - printk("pktgen: %s,%lu buffer -:%s:-\n", name, count, tb); + printk("pktgen: %s,%lu buffer -:%s:-\n", name, + (unsigned long) count, tb); } if (!strcmp(name, "min_pkt_size")) { @@ -1335,92 +1292,98 @@ static int proc_if_write(struct file *file, const char __user *user_buffer, return -EINVAL; } -static int proc_thread_read(char *buf , char **start, off_t offset, - int len, int *eof, void *data) +static int pktgen_if_open(struct inode *inode, struct file *file) { - char *p; - struct pktgen_thread *t = (struct pktgen_thread*)(data); - struct pktgen_dev *pkt_dev = NULL; + return single_open(file, pktgen_if_show, PDE(inode)->data); +} +static struct file_operations pktgen_if_fops = { + .owner = THIS_MODULE, + .open = pktgen_if_open, + .read = seq_read, + .llseek = seq_lseek, + .write = pktgen_if_write, + .release = single_release, +}; - if (!t) { - printk("pktgen: ERROR: could not find thread in proc_thread_read\n"); - return -EINVAL; - } +static int pktgen_thread_show(struct seq_file *seq, void *v) +{ + struct pktgen_thread *t = seq->private; + struct pktgen_dev *pkt_dev = NULL; + + BUG_ON(!t); - p = buf; - p += sprintf(p, "Name: %s max_before_softirq: %d\n", + seq_printf(seq, "Name: %s max_before_softirq: %d\n", t->name, t->max_before_softirq); - p += sprintf(p, "Running: "); + seq_printf(seq, "Running: "); if_lock(t); for(pkt_dev = t->if_list;pkt_dev; pkt_dev = pkt_dev->next) if(pkt_dev->running) - p += sprintf(p, "%s ", pkt_dev->ifname); + seq_printf(seq, "%s ", pkt_dev->ifname); - p += sprintf(p, "\nStopped: "); + seq_printf(seq, "\nStopped: "); for(pkt_dev = t->if_list;pkt_dev; pkt_dev = pkt_dev->next) if(!pkt_dev->running) - p += sprintf(p, "%s ", pkt_dev->ifname); + seq_printf(seq, "%s ", pkt_dev->ifname); if (t->result[0]) - p += sprintf(p, "\nResult: %s\n", t->result); + seq_printf(seq, "\nResult: %s\n", t->result); else - p += sprintf(p, "\nResult: NA\n"); - - *eof = 1; + seq_printf(seq, "\nResult: NA\n"); if_unlock(t); - return p - buf; + return 0; } -static int proc_thread_write(struct file *file, const char __user *user_buffer, - unsigned long count, void *data) +static ssize_t pktgen_thread_write(struct file *file, + const char __user *user_buffer, + size_t count, loff_t *offset) { + struct seq_file *seq = (struct seq_file *) file->private_data; + struct pktgen_thread *t = seq->private; int i = 0, max, len, ret; char name[40]; - struct pktgen_thread *t; char *pg_result; unsigned long value = 0; - + if (count < 1) { // sprintf(pg_result, "Wrong command format"); return -EINVAL; } - + max = count - i; len = count_trail_chars(&user_buffer[i], max); - if (len < 0) - return len; - + if (len < 0) + return len; + i += len; - + /* Read variable name */ len = strn_len(&user_buffer[i], sizeof(name) - 1); - if (len < 0) - return len; + if (len < 0) + return len; memset(name, 0, sizeof(name)); if (copy_from_user(name, &user_buffer[i], len)) return -EFAULT; i += len; - + max = count -i; len = count_trail_chars(&user_buffer[i], max); - if (len < 0) - return len; - + if (len < 0) + return len; + i += len; - if (debug) - printk("pktgen: t=%s, count=%lu\n", name, count); - + if (debug) + printk("pktgen: t=%s, count=%lu\n", name, + (unsigned long) count); - t = (struct pktgen_thread*)(data); if(!t) { printk("pktgen: ERROR: No thread\n"); ret = -EINVAL; @@ -1474,21 +1437,19 @@ static int proc_thread_write(struct file *file, const char __user *user_buffer, return ret; } -static int create_proc_dir(void) +static int pktgen_thread_open(struct inode *inode, struct file *file) { - pg_proc_dir = proc_mkdir(PG_PROC_DIR, NULL); - - if (!pg_proc_dir) - return -ENODEV; - - return 0; + return single_open(file, pktgen_thread_show, PDE(inode)->data); } -static int remove_proc_dir(void) -{ - remove_proc_entry(PG_PROC_DIR, NULL); - return 0; -} +static struct file_operations pktgen_thread_fops = { + .owner = THIS_MODULE, + .open = pktgen_thread_open, + .read = seq_read, + .llseek = seq_lseek, + .write = pktgen_thread_write, + .release = single_release, +}; /* Think find or remove for NN */ static struct pktgen_dev *__pktgen_NN_threads(const char* ifname, int remove) @@ -2552,8 +2513,7 @@ static void pktgen_rem_thread(struct pktgen_thread *t) struct pktgen_thread *tmp = pktgen_threads; - if (strlen(t->fname)) - remove_proc_entry(t->fname, NULL); + remove_proc_entry(t->name, pg_proc_dir); thread_lock(); @@ -2825,7 +2785,7 @@ static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t, const char* i if_lock(t); for(pkt_dev=t->if_list; pkt_dev; pkt_dev = pkt_dev->next ) { - if (strcmp(pkt_dev->ifname, ifname) == 0) { + if (strncmp(pkt_dev->ifname, ifname, IFNAMSIZ) == 0) { break; } } @@ -2864,65 +2824,63 @@ static int add_dev_to_thread(struct pktgen_thread *t, struct pktgen_dev *pkt_dev static int pktgen_add_device(struct pktgen_thread *t, const char* ifname) { struct pktgen_dev *pkt_dev; + struct proc_dir_entry *pe; /* We don't allow a device to be on several threads */ - if( (pkt_dev = __pktgen_NN_threads(ifname, FIND)) == NULL) { - - pkt_dev = kzalloc(sizeof(struct pktgen_dev), GFP_KERNEL); - if (!pkt_dev) - return -ENOMEM; - - pkt_dev->flows = vmalloc(MAX_CFLOWS*sizeof(struct flow_state)); - if (pkt_dev->flows == NULL) { - kfree(pkt_dev); - return -ENOMEM; - } - memset(pkt_dev->flows, 0, MAX_CFLOWS*sizeof(struct flow_state)); - - pkt_dev->min_pkt_size = ETH_ZLEN; - pkt_dev->max_pkt_size = ETH_ZLEN; - pkt_dev->nfrags = 0; - pkt_dev->clone_skb = pg_clone_skb_d; - pkt_dev->delay_us = pg_delay_d / 1000; - pkt_dev->delay_ns = pg_delay_d % 1000; - pkt_dev->count = pg_count_d; - pkt_dev->sofar = 0; - pkt_dev->udp_src_min = 9; /* sink port */ - pkt_dev->udp_src_max = 9; - pkt_dev->udp_dst_min = 9; - pkt_dev->udp_dst_max = 9; - - strncpy(pkt_dev->ifname, ifname, 31); - sprintf(pkt_dev->fname, "%s/%s", PG_PROC_DIR, ifname); - - if (! pktgen_setup_dev(pkt_dev)) { - printk("pktgen: ERROR: pktgen_setup_dev failed.\n"); - if (pkt_dev->flows) - vfree(pkt_dev->flows); - kfree(pkt_dev); - return -ENODEV; - } - - pkt_dev->proc_ent = create_proc_entry(pkt_dev->fname, 0600, NULL); - if (!pkt_dev->proc_ent) { - printk("pktgen: cannot create %s procfs entry.\n", pkt_dev->fname); - if (pkt_dev->flows) - vfree(pkt_dev->flows); - kfree(pkt_dev); - return -EINVAL; - } - pkt_dev->proc_ent->read_proc = proc_if_read; - pkt_dev->proc_ent->write_proc = proc_if_write; - pkt_dev->proc_ent->data = (void*)(pkt_dev); - pkt_dev->proc_ent->owner = THIS_MODULE; - - return add_dev_to_thread(t, pkt_dev); - } - else { + pkt_dev = __pktgen_NN_threads(ifname, FIND); + if (pkt_dev) { printk("pktgen: ERROR: interface already used.\n"); return -EBUSY; } + + pkt_dev = kzalloc(sizeof(struct pktgen_dev), GFP_KERNEL); + if (!pkt_dev) + return -ENOMEM; + + pkt_dev->flows = vmalloc(MAX_CFLOWS*sizeof(struct flow_state)); + if (pkt_dev->flows == NULL) { + kfree(pkt_dev); + return -ENOMEM; + } + memset(pkt_dev->flows, 0, MAX_CFLOWS*sizeof(struct flow_state)); + + pkt_dev->min_pkt_size = ETH_ZLEN; + pkt_dev->max_pkt_size = ETH_ZLEN; + pkt_dev->nfrags = 0; + pkt_dev->clone_skb = pg_clone_skb_d; + pkt_dev->delay_us = pg_delay_d / 1000; + pkt_dev->delay_ns = pg_delay_d % 1000; + pkt_dev->count = pg_count_d; + pkt_dev->sofar = 0; + pkt_dev->udp_src_min = 9; /* sink port */ + pkt_dev->udp_src_max = 9; + pkt_dev->udp_dst_min = 9; + pkt_dev->udp_dst_max = 9; + + strncpy(pkt_dev->ifname, ifname, IFNAMSIZ); + + if (! pktgen_setup_dev(pkt_dev)) { + printk("pktgen: ERROR: pktgen_setup_dev failed.\n"); + if (pkt_dev->flows) + vfree(pkt_dev->flows); + kfree(pkt_dev); + return -ENODEV; + } + + pe = create_proc_entry(ifname, 0600, pg_proc_dir); + if (!pe) { + printk("pktgen: cannot create %s/%s procfs entry.\n", + PG_PROC_DIR, ifname); + if (pkt_dev->flows) + vfree(pkt_dev->flows); + kfree(pkt_dev); + return -EINVAL; + } + pe->proc_fops = &pktgen_if_fops; + pe->data = pkt_dev; + + return add_dev_to_thread(t, pkt_dev); } static struct pktgen_thread *pktgen_find_thread(const char* name) @@ -2945,6 +2903,7 @@ static struct pktgen_thread *pktgen_find_thread(const char* name) static int pktgen_create_thread(const char* name, int cpu) { struct pktgen_thread *t = NULL; + struct proc_dir_entry *pe; if (strlen(name) > 31) { printk("pktgen: ERROR: Thread name cannot be more than 31 characters.\n"); @@ -2966,17 +2925,16 @@ static int pktgen_create_thread(const char* name, int cpu) spin_lock_init(&t->if_lock); t->cpu = cpu; - sprintf(t->fname, "%s/%s", PG_PROC_DIR, t->name); - t->proc_ent = create_proc_entry(t->fname, 0600, NULL); - if (!t->proc_ent) { - printk("pktgen: cannot create %s procfs entry.\n", t->fname); + pe = create_proc_entry(t->name, 0600, pg_proc_dir); + if (!pe) { + printk("pktgen: cannot create %s/%s procfs entry.\n", + PG_PROC_DIR, t->name); kfree(t); return -EINVAL; } - t->proc_ent->read_proc = proc_thread_read; - t->proc_ent->write_proc = proc_thread_write; - t->proc_ent->data = (void*)(t); - t->proc_ent->owner = THIS_MODULE; + + pe->proc_fops = &pktgen_thread_fops; + pe->data = t; t->next = pktgen_threads; pktgen_threads = t; @@ -3031,8 +2989,7 @@ static int pktgen_remove_device(struct pktgen_thread *t, struct pktgen_dev *pkt_ /* Clean up proc file system */ - if (strlen(pkt_dev->fname)) - remove_proc_entry(pkt_dev->fname, NULL); + remove_proc_entry(pkt_dev->ifname, pg_proc_dir); if (pkt_dev->flows) vfree(pkt_dev->flows); @@ -3043,21 +3000,24 @@ static int pktgen_remove_device(struct pktgen_thread *t, struct pktgen_dev *pkt_ static int __init pg_init(void) { int cpu; - printk(version); + struct proc_dir_entry *pe; - module_fname[0] = 0; + printk(version); - create_proc_dir(); + pg_proc_dir = proc_mkdir(PG_PROC_DIR, proc_net); + if (!pg_proc_dir) + return -ENODEV; + pg_proc_dir->owner = THIS_MODULE; - sprintf(module_fname, "%s/pgctrl", PG_PROC_DIR); - module_proc_ent = create_proc_entry(module_fname, 0600, NULL); - if (!module_proc_ent) { - printk("pktgen: ERROR: cannot create %s procfs entry.\n", module_fname); + pe = create_proc_entry(PGCTRL, 0600, pg_proc_dir); + if (pe == NULL) { + printk("pktgen: ERROR: cannot create %s procfs entry.\n", PGCTRL); + proc_net_remove(PG_PROC_DIR); return -EINVAL; } - module_proc_ent->proc_fops = &pktgen_fops; - module_proc_ent->data = NULL; + pe->proc_fops = &pktgen_fops; + pe->data = NULL; /* Register us to receive netdevice events */ register_netdevice_notifier(&pktgen_notifier_block); @@ -3089,10 +3049,8 @@ static void __exit pg_cleanup(void) unregister_netdevice_notifier(&pktgen_notifier_block); /* Clean up proc file system */ - - remove_proc_entry(module_fname, NULL); - - remove_proc_dir(); + remove_proc_entry(PGCTRL, pg_proc_dir); + proc_net_remove(PG_PROC_DIR); } -- GitLab From eed75f191d8318a2b144da8aae9774e1cfcae492 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Sun, 16 Oct 2005 14:22:59 +0200 Subject: [PATCH 0418/1519] [NETFILTER] ip_conntrack: Make "hashsize" conntrack parameter writable It's fairly simple to resize the hash table, but currently you need to remove and reinsert the module. That's bad (we lose connection state). Harald has even offered to write a daemon which sets this based on load. Signed-off-by: Rusty Russell Signed-off-by: Harald Welte Signed-off-by: Arnaldo Carvalho de Melo --- net/ipv4/netfilter/ip_conntrack_core.c | 132 ++++++++++++++++++------- 1 file changed, 95 insertions(+), 37 deletions(-) diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c index 07a80b56e8dc..422ab68ee7fb 100644 --- a/net/ipv4/netfilter/ip_conntrack_core.c +++ b/net/ipv4/netfilter/ip_conntrack_core.c @@ -50,7 +50,7 @@ #include #include -#define IP_CONNTRACK_VERSION "2.3" +#define IP_CONNTRACK_VERSION "2.4" #if 0 #define DEBUGP printk @@ -148,16 +148,20 @@ DEFINE_PER_CPU(struct ip_conntrack_stat, ip_conntrack_stat); static int ip_conntrack_hash_rnd_initted; static unsigned int ip_conntrack_hash_rnd; -static u_int32_t -hash_conntrack(const struct ip_conntrack_tuple *tuple) +static u_int32_t __hash_conntrack(const struct ip_conntrack_tuple *tuple, + unsigned int size, unsigned int rnd) { -#if 0 - dump_tuple(tuple); -#endif return (jhash_3words(tuple->src.ip, (tuple->dst.ip ^ tuple->dst.protonum), (tuple->src.u.all | (tuple->dst.u.all << 16)), - ip_conntrack_hash_rnd) % ip_conntrack_htable_size); + rnd) % size); +} + +static u_int32_t +hash_conntrack(const struct ip_conntrack_tuple *tuple) +{ + return __hash_conntrack(tuple, ip_conntrack_htable_size, + ip_conntrack_hash_rnd); } int @@ -1341,14 +1345,13 @@ static int kill_all(struct ip_conntrack *i, void *data) return 1; } -static void free_conntrack_hash(void) +static void free_conntrack_hash(struct list_head *hash, int vmalloced,int size) { - if (ip_conntrack_vmalloc) - vfree(ip_conntrack_hash); + if (vmalloced) + vfree(hash); else - free_pages((unsigned long)ip_conntrack_hash, - get_order(sizeof(struct list_head) - * ip_conntrack_htable_size)); + free_pages((unsigned long)hash, + get_order(sizeof(struct list_head) * size)); } void ip_conntrack_flush() @@ -1378,12 +1381,83 @@ void ip_conntrack_cleanup(void) ip_conntrack_flush(); kmem_cache_destroy(ip_conntrack_cachep); kmem_cache_destroy(ip_conntrack_expect_cachep); - free_conntrack_hash(); + free_conntrack_hash(ip_conntrack_hash, ip_conntrack_vmalloc, + ip_conntrack_htable_size); nf_unregister_sockopt(&so_getorigdst); } -static int hashsize; -module_param(hashsize, int, 0400); +static struct list_head *alloc_hashtable(int size, int *vmalloced) +{ + struct list_head *hash; + unsigned int i; + + *vmalloced = 0; + hash = (void*)__get_free_pages(GFP_KERNEL, + get_order(sizeof(struct list_head) + * size)); + if (!hash) { + *vmalloced = 1; + printk(KERN_WARNING"ip_conntrack: falling back to vmalloc.\n"); + hash = vmalloc(sizeof(struct list_head) * size); + } + + if (hash) + for (i = 0; i < size; i++) + INIT_LIST_HEAD(&hash[i]); + + return hash; +} + +int set_hashsize(const char *val, struct kernel_param *kp) +{ + int i, bucket, hashsize, vmalloced; + int old_vmalloced, old_size; + int rnd; + struct list_head *hash, *old_hash; + struct ip_conntrack_tuple_hash *h; + + /* On boot, we can set this without any fancy locking. */ + if (!ip_conntrack_htable_size) + return param_set_int(val, kp); + + hashsize = simple_strtol(val, NULL, 0); + if (!hashsize) + return -EINVAL; + + hash = alloc_hashtable(hashsize, &vmalloced); + if (!hash) + return -ENOMEM; + + /* We have to rehash for the new table anyway, so we also can + * use a new random seed */ + get_random_bytes(&rnd, 4); + + write_lock_bh(&ip_conntrack_lock); + for (i = 0; i < ip_conntrack_htable_size; i++) { + while (!list_empty(&ip_conntrack_hash[i])) { + h = list_entry(ip_conntrack_hash[i].next, + struct ip_conntrack_tuple_hash, list); + list_del(&h->list); + bucket = __hash_conntrack(&h->tuple, hashsize, rnd); + list_add_tail(&h->list, &hash[bucket]); + } + } + old_size = ip_conntrack_htable_size; + old_vmalloced = ip_conntrack_vmalloc; + old_hash = ip_conntrack_hash; + + ip_conntrack_htable_size = hashsize; + ip_conntrack_vmalloc = vmalloced; + ip_conntrack_hash = hash; + ip_conntrack_hash_rnd = rnd; + write_unlock_bh(&ip_conntrack_lock); + + free_conntrack_hash(old_hash, old_vmalloced, old_size); + return 0; +} + +module_param_call(hashsize, set_hashsize, param_get_uint, + &ip_conntrack_htable_size, 0600); int __init ip_conntrack_init(void) { @@ -1392,9 +1466,7 @@ int __init ip_conntrack_init(void) /* Idea from tcp.c: use 1/16384 of memory. On i386: 32MB * machine has 256 buckets. >= 1GB machines have 8192 buckets. */ - if (hashsize) { - ip_conntrack_htable_size = hashsize; - } else { + if (!ip_conntrack_htable_size) { ip_conntrack_htable_size = (((num_physpages << PAGE_SHIFT) / 16384) / sizeof(struct list_head)); @@ -1416,20 +1488,8 @@ int __init ip_conntrack_init(void) return ret; } - /* AK: the hash table is twice as big than needed because it - uses list_head. it would be much nicer to caches to use a - single pointer list head here. */ - ip_conntrack_vmalloc = 0; - ip_conntrack_hash - =(void*)__get_free_pages(GFP_KERNEL, - get_order(sizeof(struct list_head) - *ip_conntrack_htable_size)); - if (!ip_conntrack_hash) { - ip_conntrack_vmalloc = 1; - printk(KERN_WARNING "ip_conntrack: falling back to vmalloc.\n"); - ip_conntrack_hash = vmalloc(sizeof(struct list_head) - * ip_conntrack_htable_size); - } + ip_conntrack_hash = alloc_hashtable(ip_conntrack_htable_size, + &ip_conntrack_vmalloc); if (!ip_conntrack_hash) { printk(KERN_ERR "Unable to create ip_conntrack_hash\n"); goto err_unreg_sockopt; @@ -1461,9 +1521,6 @@ int __init ip_conntrack_init(void) ip_ct_protos[IPPROTO_ICMP] = &ip_conntrack_protocol_icmp; write_unlock_bh(&ip_conntrack_lock); - for (i = 0; i < ip_conntrack_htable_size; i++) - INIT_LIST_HEAD(&ip_conntrack_hash[i]); - /* For use by ipt_REJECT */ ip_ct_attach = ip_conntrack_attach; @@ -1478,7 +1535,8 @@ int __init ip_conntrack_init(void) err_free_conntrack_slab: kmem_cache_destroy(ip_conntrack_cachep); err_free_hash: - free_conntrack_hash(); + free_conntrack_hash(ip_conntrack_hash, ip_conntrack_vmalloc, + ip_conntrack_htable_size); err_unreg_sockopt: nf_unregister_sockopt(&so_getorigdst); -- GitLab From 1371e37da299d4df6267ad0ddf010435782c28e9 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 15 Oct 2005 09:42:39 +1000 Subject: [PATCH 0419/1519] [IPV4]: Kill redundant rcu_dereference on fa_info This patch kills a redundant rcu_dereference on fa->fa_info in fib_trie.c. As this dereference directly follows a list_for_each_entry_rcu line, we have already taken a read barrier with respect to getting an entry from the list. This read barrier guarantees that all values read out of fa are valid. In particular, the contents of structure pointed to by fa->fa_info is initialised before fa->fa_info is actually set (see fn_trie_insert); the setting of fa->fa_info itself is further separated with a write barrier from the insertion of fa into the list. Therefore by taking a read barrier after obtaining fa from the list (which is given by list_for_each_entry_rcu), we can be sure that fa->fa_info contains a valid pointer, as well as the fact that the data pointed to by fa->fa_info is itself valid. Signed-off-by: Herbert Xu Acked-by: Paul E. McKenney Signed-off-by: David S. Miller Signed-off-by: Arnaldo Carvalho de Melo --- net/ipv4/fib_trie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 0093ea08c7f5..66247f38b371 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -2404,7 +2404,7 @@ static int fib_route_seq_show(struct seq_file *seq, void *v) prefix = htonl(l->key); list_for_each_entry_rcu(fa, &li->falh, fa_list) { - const struct fib_info *fi = rcu_dereference(fa->fa_info); + const struct fib_info *fi = fa->fa_info; unsigned flags = fib_flag_trans(fa->fa_type, mask, fi); if (fa->fa_type == RTN_BROADCAST -- GitLab From 80b30c1023dbd795faf948dee0cfb3b270b56d47 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 15 Oct 2005 10:58:30 +1000 Subject: [PATCH 0420/1519] [IPSEC]: Kill obsolete get_mss function Now that we've switched over to storing MTUs in the xfrm_dst entries, we no longer need the dst's get_mss methods. This patch gets rid of them. It also documents the fact that our MTU calculation is not optimal for ESP. Signed-off-by: Herbert Xu Signed-off-by: Arnaldo Carvalho de Melo --- include/net/dst.h | 1 - net/xfrm/xfrm_policy.c | 43 ------------------------------------------ net/xfrm/xfrm_state.c | 6 ++++++ 3 files changed, 6 insertions(+), 44 deletions(-) diff --git a/include/net/dst.h b/include/net/dst.h index 4a056a682435..6c196a5baf24 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -94,7 +94,6 @@ struct dst_ops struct dst_entry * (*negative_advice)(struct dst_entry *); void (*link_failure)(struct sk_buff *); void (*update_pmtu)(struct dst_entry *dst, u32 mtu); - int (*get_mss)(struct dst_entry *dst, u32 mtu); int entry_size; atomic_t entries; diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index cbb0ba34a600..0db9e57013fd 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1192,46 +1192,6 @@ int xfrm_bundle_ok(struct xfrm_dst *first, struct flowi *fl, int family) EXPORT_SYMBOL(xfrm_bundle_ok); -/* Well... that's _TASK_. We need to scan through transformation - * list and figure out what mss tcp should generate in order to - * final datagram fit to mtu. Mama mia... :-) - * - * Apparently, some easy way exists, but we used to choose the most - * bizarre ones. :-) So, raising Kalashnikov... tra-ta-ta. - * - * Consider this function as something like dark humour. :-) - */ -static int xfrm_get_mss(struct dst_entry *dst, u32 mtu) -{ - int res = mtu - dst->header_len; - - for (;;) { - struct dst_entry *d = dst; - int m = res; - - do { - struct xfrm_state *x = d->xfrm; - if (x) { - spin_lock_bh(&x->lock); - if (x->km.state == XFRM_STATE_VALID && - x->type && x->type->get_max_size) - m = x->type->get_max_size(d->xfrm, m); - else - m += x->props.header_len; - spin_unlock_bh(&x->lock); - } - } while ((d = d->child) != NULL); - - if (m <= mtu) - break; - res -= (m - mtu); - if (res < 88) - return mtu; - } - - return res + dst->header_len; -} - int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) { int err = 0; @@ -1252,8 +1212,6 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) dst_ops->negative_advice = xfrm_negative_advice; if (likely(dst_ops->link_failure == NULL)) dst_ops->link_failure = xfrm_link_failure; - if (likely(dst_ops->get_mss == NULL)) - dst_ops->get_mss = xfrm_get_mss; if (likely(afinfo->garbage_collect == NULL)) afinfo->garbage_collect = __xfrm_garbage_collect; xfrm_policy_afinfo[afinfo->family] = afinfo; @@ -1281,7 +1239,6 @@ int xfrm_policy_unregister_afinfo(struct xfrm_policy_afinfo *afinfo) dst_ops->check = NULL; dst_ops->negative_advice = NULL; dst_ops->link_failure = NULL; - dst_ops->get_mss = NULL; afinfo->garbage_collect = NULL; } } diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 9d206c282cf1..8b9a4747417d 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1026,6 +1026,12 @@ void xfrm_state_delete_tunnel(struct xfrm_state *x) } EXPORT_SYMBOL(xfrm_state_delete_tunnel); +/* + * This function is NOT optimal. For example, with ESP it will give an + * MTU that's usually two bytes short of being optimal. However, it will + * usually give an answer that's a multiple of 4 provided the input is + * also a multiple of 4. + */ int xfrm_state_mtu(struct xfrm_state *x, int mtu) { int res = mtu; -- GitLab From ea7ce406490cb248f44f510f7c0bcc357184640a Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Thu, 13 Oct 2005 11:43:05 -0700 Subject: [PATCH 0421/1519] [NETLINK]: Remove dead code in af_netlink.c Remove the variable nlk & call to nlk_sk as it does not have any side effect. Signed-off-by: Jayachandran C. Acked-by: James Morris Signed-off-by: Arnaldo Carvalho de Melo --- net/netlink/af_netlink.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 678c3f2c0d0b..eab4942ac97d 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -740,11 +740,8 @@ int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, long t int netlink_sendskb(struct sock *sk, struct sk_buff *skb, int protocol) { - struct netlink_sock *nlk; int len = skb->len; - nlk = nlk_sk(sk); - skb_queue_tail(&sk->sk_receive_queue, skb); sk->sk_data_ready(sk, len); sock_put(sk); -- GitLab From 0d0d2bba97cb091218ea0bcb3d8debcc7bf48397 Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Thu, 13 Oct 2005 11:43:02 -0700 Subject: [PATCH 0422/1519] [IPV4]: Remove dead code from ip_output.c skb_prev is assigned from skb, which cannot be NULL. This patch removes the unnecessary NULL check. Signed-off-by: Jayachandran C. Acked-by: James Morris Signed-off-by: Arnaldo Carvalho de Melo --- net/ipv4/ip_output.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 1ad5202e556b..87e350069abb 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1023,10 +1023,7 @@ ssize_t ip_append_page(struct sock *sk, struct page *page, int alloclen; skb_prev = skb; - if (skb_prev) - fraggap = skb_prev->len - maxfraglen; - else - fraggap = 0; + fraggap = skb_prev->len - maxfraglen; alloclen = fragheaderlen + hh_len + fraggap + 15; skb = sock_wmalloc(sk, alloclen, 1, sk->sk_allocation); -- GitLab From c83c24861882758b9731e8550225cd1e52a4cd1c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 18 Oct 2005 22:07:41 -0700 Subject: [PATCH 0423/1519] [SK_BUFF] kernel-doc: fix skbuff warnings Add kernel-doc to skbuff.h, skbuff.c to eliminate kernel-doc warnings. Signed-off-by: Randy Dunlap Signed-off-by: Arnaldo Carvalho de Melo --- include/linux/skbuff.h | 3 ++- net/core/skbuff.c | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 8f5d9e7f8734..b756935da9c8 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -171,7 +171,6 @@ enum { * struct sk_buff - socket buffer * @next: Next buffer in list * @prev: Previous buffer in list - * @list: List we are on * @sk: Socket we are owned by * @tstamp: Time we arrived * @dev: Device we arrived on/are leaving by @@ -190,6 +189,7 @@ enum { * @cloned: Head may be cloned (check refcnt to be sure) * @nohdr: Payload reference only, must not modify header * @pkt_type: Packet class + * @fclone: skbuff clone status * @ip_summed: Driver fed us an IP checksum * @priority: Packet queueing priority * @users: User count - see {datagram,tcp}.c @@ -202,6 +202,7 @@ enum { * @destructor: Destruct function * @nfmark: Can be used for communication between hooks * @nfct: Associated connection, if any + * @ipvs_property: skbuff is owned by ipvs * @nfctinfo: Relationship of this skb to the connection * @nf_bridge: Saved data about a bridged frame - see br_netfilter.c * @tc_index: Traffic control index diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 02cd4cde2112..ef9d46b91eb9 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -122,6 +122,8 @@ void skb_under_panic(struct sk_buff *skb, int sz, void *here) * __alloc_skb - allocate a network buffer * @size: size to allocate * @gfp_mask: allocation mask + * @fclone: allocate from fclone cache instead of head cache + * and allocate a cloned (child) skb * * Allocate a new &sk_buff. The returned buffer has no headroom and a * tail room of size bytes. The object has a reference count of one. -- GitLab From 95df1c04ab3f7ca617774930df62c0893a188c2c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 18 Oct 2005 21:39:33 +0100 Subject: [PATCH 0424/1519] [AX.25]: Use constant instead of magic number Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Arnaldo Carvalho de Melo --- net/rose/rose_route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c index e556d92c0bc4..b18fe5043019 100644 --- a/net/rose/rose_route.c +++ b/net/rose/rose_route.c @@ -727,7 +727,7 @@ int rose_rt_ioctl(unsigned int cmd, void __user *arg) } if (rose_route.mask > 10) /* Mask can't be more than 10 digits */ return -EINVAL; - if (rose_route.ndigis > 8) /* No more than 8 digipeats */ + if (rose_route.ndigis > AX25_MAX_DIGIS) return -EINVAL; err = rose_add_node(&rose_route, dev); dev_put(dev); -- GitLab From dcab5e1eeccf5e226c771ecc013631cde157435f Mon Sep 17 00:00:00 2001 From: David Engel Date: Fri, 21 Oct 2005 22:09:16 -0500 Subject: [PATCH 0425/1519] [IPV4]: Fix setting broadcast for SIOCSIFNETMASK Fix setting of the broadcast address when the netmask is set via SIOCSIFNETMASK in Linux 2.6. The code wanted the old value of ifa->ifa_mask but used it after it had already been overwritten with the new value. Signed-off-by: David Engel Signed-off-by: Arnaldo Carvalho de Melo --- net/ipv4/devinet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 74f2207e131a..4ec4b2ca6ab1 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -715,6 +715,7 @@ int devinet_ioctl(unsigned int cmd, void __user *arg) break; ret = 0; if (ifa->ifa_mask != sin->sin_addr.s_addr) { + u32 old_mask = ifa->ifa_mask; inet_del_ifa(in_dev, ifap, 0); ifa->ifa_mask = sin->sin_addr.s_addr; ifa->ifa_prefixlen = inet_mask_len(ifa->ifa_mask); @@ -728,7 +729,7 @@ int devinet_ioctl(unsigned int cmd, void __user *arg) if ((dev->flags & IFF_BROADCAST) && (ifa->ifa_prefixlen < 31) && (ifa->ifa_broadcast == - (ifa->ifa_local|~ifa->ifa_mask))) { + (ifa->ifa_local|~old_mask))) { ifa->ifa_broadcast = (ifa->ifa_local | ~sin->sin_addr.s_addr); } -- GitLab From ac9c18974f7d08cdedfb1e9599faa8c851c7cef9 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 26 Oct 2005 00:51:24 -0400 Subject: [PATCH 0426/1519] [netdrvr forcedeth] scatter gather and segmentation offload support also: - eliminate use of pointless get_nvpriv() wrapper, and use netdev_priv() directly. - use NETDEV_TX_xxx return codes --- drivers/net/forcedeth.c | 249 ++++++++++++++++++++++++++-------------- 1 file changed, 162 insertions(+), 87 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index e5f480203675..22aec6ed80f5 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -96,6 +96,7 @@ * 0.42: 06 Aug 2005: Fix lack of link speed initialization * in the second (and later) nv_open call * 0.43: 10 Aug 2005: Add support for tx checksum. + * 0.44: 20 Aug 2005: Add support for scatter gather and segmentation. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -107,7 +108,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.43" +#define FORCEDETH_VERSION "0.44" #define DRV_NAME "forcedeth" #include @@ -340,6 +341,8 @@ typedef union _ring_type { /* error and valid are the same for both */ #define NV_TX2_ERROR (1<<30) #define NV_TX2_VALID (1<<31) +#define NV_TX2_TSO (1<<28) +#define NV_TX2_TSO_SHIFT 14 #define NV_TX2_CHECKSUM_L3 (1<<27) #define NV_TX2_CHECKSUM_L4 (1<<26) @@ -542,7 +545,7 @@ static inline struct fe_priv *get_nvpriv(struct net_device *dev) static inline u8 __iomem *get_hwbase(struct net_device *dev) { - return get_nvpriv(dev)->base; + return ((struct fe_priv *)netdev_priv(dev))->base; } static inline void pci_push(u8 __iomem *base) @@ -631,7 +634,7 @@ static int mii_rw(struct net_device *dev, int addr, int miireg, int value) static int phy_reset(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u32 miicontrol; unsigned int tries = 0; @@ -734,7 +737,7 @@ static int phy_init(struct net_device *dev) static void nv_start_rx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); dprintk(KERN_DEBUG "%s: nv_start_rx\n", dev->name); @@ -790,7 +793,7 @@ static void nv_stop_tx(struct net_device *dev) static void nv_txrx_reset(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); dprintk(KERN_DEBUG "%s: nv_txrx_reset\n", dev->name); @@ -809,7 +812,7 @@ static void nv_txrx_reset(struct net_device *dev) */ static struct net_device_stats *nv_get_stats(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); /* It seems that the nic always generates interrupts and doesn't * accumulate errors internally. Thus the current values in np->stats @@ -825,7 +828,7 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev) */ static int nv_alloc_rx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); unsigned int refill_rx = np->refill_rx; int nr; @@ -869,7 +872,7 @@ static int nv_alloc_rx(struct net_device *dev) static void nv_do_rx_refill(unsigned long data) { struct net_device *dev = (struct net_device *) data; - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); disable_irq(dev->irq); if (nv_alloc_rx(dev)) { @@ -883,7 +886,7 @@ static void nv_do_rx_refill(unsigned long data) static void nv_init_rx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int i; np->cur_rx = RX_RING; @@ -897,15 +900,17 @@ static void nv_init_rx(struct net_device *dev) static void nv_init_tx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int i; np->next_tx = np->nic_tx = 0; - for (i = 0; i < TX_RING; i++) + for (i = 0; i < TX_RING; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) np->tx_ring.orig[i].FlagLen = 0; else np->tx_ring.ex[i].FlagLen = 0; + np->tx_skbuff[i] = NULL; + } } static int nv_init_ring(struct net_device *dev) @@ -915,21 +920,44 @@ static int nv_init_ring(struct net_device *dev) return nv_alloc_rx(dev); } +static void nv_release_txskb(struct net_device *dev, unsigned int skbnr) +{ + struct fe_priv *np = netdev_priv(dev); + struct sk_buff *skb = np->tx_skbuff[skbnr]; + unsigned int j, entry, fragments; + + dprintk(KERN_INFO "%s: nv_release_txskb for skbnr %d, skb %p\n", + dev->name, skbnr, np->tx_skbuff[skbnr]); + + entry = skbnr; + if ((fragments = skb_shinfo(skb)->nr_frags) != 0) { + for (j = fragments; j >= 1; j--) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[j-1]; + pci_unmap_page(np->pci_dev, np->tx_dma[entry], + frag->size, + PCI_DMA_TODEVICE); + entry = (entry - 1) % TX_RING; + } + } + pci_unmap_single(np->pci_dev, np->tx_dma[entry], + skb->len - skb->data_len, + PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + np->tx_skbuff[skbnr] = NULL; +} + static void nv_drain_tx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); - int i; + struct fe_priv *np = netdev_priv(dev); + unsigned int i; + for (i = 0; i < TX_RING; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) np->tx_ring.orig[i].FlagLen = 0; else np->tx_ring.ex[i].FlagLen = 0; if (np->tx_skbuff[i]) { - pci_unmap_single(np->pci_dev, np->tx_dma[i], - np->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - dev_kfree_skb(np->tx_skbuff[i]); - np->tx_skbuff[i] = NULL; + nv_release_txskb(dev, i); np->stats.tx_dropped++; } } @@ -937,7 +965,7 @@ static void nv_drain_tx(struct net_device *dev) static void nv_drain_rx(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int i; for (i = 0; i < RX_RING; i++) { if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) @@ -967,29 +995,69 @@ static void drain_ring(struct net_device *dev) */ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); - int nr = np->next_tx % TX_RING; - u32 tx_checksum = (skb->ip_summed == CHECKSUM_HW ? (NV_TX2_CHECKSUM_L3|NV_TX2_CHECKSUM_L4) : 0); + struct fe_priv *np = netdev_priv(dev); + u32 tx_flags_extra = (np->desc_ver == DESC_VER_1 ? NV_TX_LASTPACKET : NV_TX2_LASTPACKET); + unsigned int fragments = skb_shinfo(skb)->nr_frags; + unsigned int nr = (np->next_tx + fragments) % TX_RING; + unsigned int i; + + spin_lock_irq(&np->lock); + + if ((np->next_tx - np->nic_tx + fragments) > TX_LIMIT_STOP) { + spin_unlock_irq(&np->lock); + netif_stop_queue(dev); + return NETDEV_TX_BUSY; + } np->tx_skbuff[nr] = skb; - np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data,skb->len, - PCI_DMA_TODEVICE); + + if (fragments) { + dprintk(KERN_DEBUG "%s: nv_start_xmit: buffer contains %d fragments\n", dev->name, fragments); + /* setup descriptors in reverse order */ + for (i = fragments; i >= 1; i--) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i-1]; + np->tx_dma[nr] = pci_map_page(np->pci_dev, frag->page, frag->page_offset, frag->size, + PCI_DMA_TODEVICE); - if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { + np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]); + np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (frag->size-1) | np->tx_flags | tx_flags_extra); + } else { + np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32; + np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; + np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (frag->size-1) | np->tx_flags | tx_flags_extra); + } + + nr = (nr - 1) % TX_RING; + + if (np->desc_ver == DESC_VER_1) + tx_flags_extra &= ~NV_TX_LASTPACKET; + else + tx_flags_extra &= ~NV_TX2_LASTPACKET; + } + } + +#ifdef NETIF_F_TSO + if (skb_shinfo(skb)->tso_size) + tx_flags_extra |= NV_TX2_TSO | (skb_shinfo(skb)->tso_size << NV_TX2_TSO_SHIFT); + else +#endif + tx_flags_extra |= (skb->ip_summed == CHECKSUM_HW ? (NV_TX2_CHECKSUM_L3|NV_TX2_CHECKSUM_L4) : 0); + + np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->len-skb->data_len, + PCI_DMA_TODEVICE); + + if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]); - else { + np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-skb->data_len-1) | np->tx_flags | tx_flags_extra); + } else { np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32; np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF; - } + np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-skb->data_len-1) | np->tx_flags | tx_flags_extra); + } - spin_lock_irq(&np->lock); - wmb(); - if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) - np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags | tx_checksum); - else - np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags | tx_checksum); - dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission\n", - dev->name, np->next_tx); + dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission. tx_flags_extra: %x\n", + dev->name, np->next_tx, tx_flags_extra); { int j; for (j=0; j<64; j++) { @@ -1000,15 +1068,13 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) dprintk("\n"); } - np->next_tx++; + np->next_tx += 1 + fragments; dev->trans_start = jiffies; - if (np->next_tx - np->nic_tx >= TX_LIMIT_STOP) - netif_stop_queue(dev); spin_unlock_irq(&np->lock); writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl); pci_push(get_hwbase(dev)); - return 0; + return NETDEV_TX_OK; } /* @@ -1018,9 +1084,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) */ static void nv_tx_done(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u32 Flags; - int i; + unsigned int i; + struct sk_buff *skb; while (np->nic_tx != np->next_tx) { i = np->nic_tx % TX_RING; @@ -1035,35 +1102,38 @@ static void nv_tx_done(struct net_device *dev) if (Flags & NV_TX_VALID) break; if (np->desc_ver == DESC_VER_1) { - if (Flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION| - NV_TX_UNDERFLOW|NV_TX_ERROR)) { - if (Flags & NV_TX_UNDERFLOW) - np->stats.tx_fifo_errors++; - if (Flags & NV_TX_CARRIERLOST) - np->stats.tx_carrier_errors++; - np->stats.tx_errors++; - } else { - np->stats.tx_packets++; - np->stats.tx_bytes += np->tx_skbuff[i]->len; + if (Flags & NV_TX_LASTPACKET) { + skb = np->tx_skbuff[i]; + if (Flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION| + NV_TX_UNDERFLOW|NV_TX_ERROR)) { + if (Flags & NV_TX_UNDERFLOW) + np->stats.tx_fifo_errors++; + if (Flags & NV_TX_CARRIERLOST) + np->stats.tx_carrier_errors++; + np->stats.tx_errors++; + } else { + np->stats.tx_packets++; + np->stats.tx_bytes += skb->len; + } + nv_release_txskb(dev, i); } } else { - if (Flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION| - NV_TX2_UNDERFLOW|NV_TX2_ERROR)) { - if (Flags & NV_TX2_UNDERFLOW) - np->stats.tx_fifo_errors++; - if (Flags & NV_TX2_CARRIERLOST) - np->stats.tx_carrier_errors++; - np->stats.tx_errors++; - } else { - np->stats.tx_packets++; - np->stats.tx_bytes += np->tx_skbuff[i]->len; + if (Flags & NV_TX2_LASTPACKET) { + skb = np->tx_skbuff[i]; + if (Flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION| + NV_TX2_UNDERFLOW|NV_TX2_ERROR)) { + if (Flags & NV_TX2_UNDERFLOW) + np->stats.tx_fifo_errors++; + if (Flags & NV_TX2_CARRIERLOST) + np->stats.tx_carrier_errors++; + np->stats.tx_errors++; + } else { + np->stats.tx_packets++; + np->stats.tx_bytes += skb->len; + } + nv_release_txskb(dev, i); } } - pci_unmap_single(np->pci_dev, np->tx_dma[i], - np->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - dev_kfree_skb_irq(np->tx_skbuff[i]); - np->tx_skbuff[i] = NULL; np->nic_tx++; } if (np->next_tx - np->nic_tx < TX_LIMIT_START) @@ -1076,7 +1146,7 @@ static void nv_tx_done(struct net_device *dev) */ static void nv_tx_timeout(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name, @@ -1209,7 +1279,7 @@ static int nv_getlen(struct net_device *dev, void *packet, int datalen) static void nv_rx_process(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u32 Flags; for (;;) { @@ -1364,7 +1434,7 @@ static void set_bufsize(struct net_device *dev) */ static int nv_change_mtu(struct net_device *dev, int new_mtu) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int old_mtu; if (new_mtu < 64 || new_mtu > np->pkt_limit) @@ -1449,7 +1519,7 @@ static void nv_copy_mac_to_hw(struct net_device *dev) */ static int nv_set_mac_address(struct net_device *dev, void *addr) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); struct sockaddr *macaddr = (struct sockaddr*)addr; if(!is_valid_ether_addr(macaddr->sa_data)) @@ -1484,7 +1554,7 @@ static int nv_set_mac_address(struct net_device *dev, void *addr) */ static void nv_set_multicast(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); u32 addr[2]; u32 mask[2]; @@ -1544,7 +1614,7 @@ static void nv_set_multicast(struct net_device *dev) static int nv_update_linkspeed(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); int adv, lpa; int newls = np->linkspeed; @@ -1714,7 +1784,7 @@ static void nv_link_irq(struct net_device *dev) static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs) { struct net_device *dev = (struct net_device *) data; - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); u32 events; int i; @@ -1786,7 +1856,7 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs) static void nv_do_nic_poll(unsigned long data) { struct net_device *dev = (struct net_device *) data; - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); disable_irq(dev->irq); @@ -1810,7 +1880,7 @@ static void nv_poll_controller(struct net_device *dev) static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); strcpy(info->driver, "forcedeth"); strcpy(info->version, FORCEDETH_VERSION); strcpy(info->bus_info, pci_name(np->pci_dev)); @@ -1818,7 +1888,7 @@ static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) static void nv_get_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); wolinfo->supported = WAKE_MAGIC; spin_lock_irq(&np->lock); @@ -1829,7 +1899,7 @@ static void nv_get_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo) static int nv_set_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); spin_lock_irq(&np->lock); @@ -2030,7 +2100,7 @@ static int nv_get_regs_len(struct net_device *dev) static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); u32 *rbuf = buf; int i; @@ -2044,7 +2114,7 @@ static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void static int nv_nway_reset(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); int ret; spin_lock_irq(&np->lock); @@ -2079,7 +2149,7 @@ static struct ethtool_ops ops = { static int nv_open(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base = get_hwbase(dev); int ret, oom, i; @@ -2215,7 +2285,7 @@ static int nv_open(struct net_device *dev) static int nv_close(struct net_device *dev) { - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); u8 __iomem *base; spin_lock_irq(&np->lock); @@ -2271,7 +2341,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (!dev) goto out; - np = get_nvpriv(dev); + np = netdev_priv(dev); np->pci_dev = pci_dev; spin_lock_init(&np->lock); SET_MODULE_OWNER(dev); @@ -2323,6 +2393,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) { printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n", pci_name(pci_dev)); + } else { + dev->features |= NETIF_F_HIGHDMA; } np->txrxctl_bits = NVREG_TXRXCTL_DESC_3; } else if (id->driver_data & DEV_HAS_LARGEDESC) { @@ -2341,8 +2413,11 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (id->driver_data & DEV_HAS_CHECKSUM) { np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK; - dev->features |= NETIF_F_HW_CSUM; - } + dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG; +#ifdef NETIF_F_TSO + dev->features |= NETIF_F_TSO; +#endif + } err = -ENOMEM; np->base = ioremap(addr, NV_PCI_REGSZ); @@ -2422,9 +2497,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i np->wolenabled = 0; if (np->desc_ver == DESC_VER_1) { - np->tx_flags = NV_TX_LASTPACKET|NV_TX_VALID; + np->tx_flags = NV_TX_VALID; } else { - np->tx_flags = NV_TX2_LASTPACKET|NV_TX2_VALID; + np->tx_flags = NV_TX2_VALID; } np->irqmask = NVREG_IRQMASK_WANTED; if (id->driver_data & DEV_NEED_TIMERIRQ) @@ -2513,7 +2588,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i static void __devexit nv_remove(struct pci_dev *pci_dev) { struct net_device *dev = pci_get_drvdata(pci_dev); - struct fe_priv *np = get_nvpriv(dev); + struct fe_priv *np = netdev_priv(dev); unregister_netdev(dev); -- GitLab From 077783f87708b24054452e5c07685ead2c28b1eb Mon Sep 17 00:00:00 2001 From: James Ketrenos Date: Mon, 24 Oct 2005 10:27:46 -0500 Subject: [PATCH 0427/1519] [PATCH] ieee80211 build fix James Ketrenos wrote: > [3/4] Use the tx_headroom and reserve requested space. This patch introduced a compile problem; patch below corrects this. Fixed compilation error due to not passing tx_headroom in ieee80211_tx_frame. Signed-off-by: James Ketrenos Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index fb4509032402..95ccbadbf55b 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -541,7 +541,7 @@ int ieee80211_tx_frame(struct ieee80211_device *ieee, /* When we allocate the TXB we allocate enough space for the reserve * and full fragment bytes (bytes_per_frag doesn't include prefix, * postfix, header, FCS, etc.) */ - txb = ieee80211_alloc_txb(1, len, GFP_ATOMIC); + txb = ieee80211_alloc_txb(1, len, ieee->tx_headroom, GFP_ATOMIC); if (unlikely(!txb)) { printk(KERN_WARNING "%s: Could not allocate TXB\n", ieee->dev->name); -- GitLab From 91190758d410a5d33c6051ba9ca95baa430256bb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 26 Oct 2005 12:17:46 -0400 Subject: [PATCH 0428/1519] [libata] ata_timing fix --- drivers/scsi/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index dcd3b5553cc8..f53d7b8ac33f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1616,7 +1616,7 @@ static const struct ata_timing* ata_timing_find_mode(unsigned short speed) const struct ata_timing *t; for (t = ata_timing; t->mode != speed; t++) - if (t->mode != 0xFF) + if (t->mode == 0xFF) return NULL; return t; } -- GitLab From 3d155f8cd0d077938d271225d26ee52f8eb26082 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 27 Oct 2005 11:03:38 -0700 Subject: [PATCH 0429/1519] [IB] mthca: first pass at catastrophic error reporting Add some initial support for detecting and reporting catastrophic errors reported by Mellanox HCAs. We start a periodic timer which polls the catastrophic error reporting buffer in device memory. If an error is detected, we dump the contents of the buffer for port-mortem debugging, and report a fatal asynchronous error to higher levels. In the future we can try to recover from these errors by resetting the device, but this will require some work in higher-level code as well. Let's get this in now, so that we at least get catastrophic errors reported in logs. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/Makefile | 3 +- drivers/infiniband/hw/mthca/mthca_catas.c | 153 +++++++++++++++++++ drivers/infiniband/hw/mthca/mthca_cmd.c | 5 + drivers/infiniband/hw/mthca/mthca_dev.h | 13 ++ drivers/infiniband/hw/mthca/mthca_provider.c | 3 + 5 files changed, 176 insertions(+), 1 deletion(-) create mode 100644 drivers/infiniband/hw/mthca/mthca_catas.c diff --git a/drivers/infiniband/hw/mthca/Makefile b/drivers/infiniband/hw/mthca/Makefile index c44f7bae5424..47ec5a7cba0b 100644 --- a/drivers/infiniband/hw/mthca/Makefile +++ b/drivers/infiniband/hw/mthca/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_INFINIBAND_MTHCA) += ib_mthca.o ib_mthca-y := mthca_main.o mthca_cmd.o mthca_profile.o mthca_reset.o \ mthca_allocator.o mthca_eq.o mthca_pd.o mthca_cq.o \ mthca_mr.o mthca_qp.o mthca_av.o mthca_mcg.o mthca_mad.o \ - mthca_provider.o mthca_memfree.o mthca_uar.o mthca_srq.o + mthca_provider.o mthca_memfree.o mthca_uar.o mthca_srq.o \ + mthca_catas.o diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c new file mode 100644 index 000000000000..7ac52af43b99 --- /dev/null +++ b/drivers/infiniband/hw/mthca/mthca_catas.c @@ -0,0 +1,153 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * $Id$ + */ + +#include "mthca_dev.h" + +enum { + MTHCA_CATAS_POLL_INTERVAL = 5 * HZ, + + MTHCA_CATAS_TYPE_INTERNAL = 0, + MTHCA_CATAS_TYPE_UPLINK = 3, + MTHCA_CATAS_TYPE_DDR = 4, + MTHCA_CATAS_TYPE_PARITY = 5, +}; + +static DEFINE_SPINLOCK(catas_lock); + +static void handle_catas(struct mthca_dev *dev) +{ + struct ib_event event; + const char *type; + int i; + + event.device = &dev->ib_dev; + event.event = IB_EVENT_DEVICE_FATAL; + event.element.port_num = 0; + + ib_dispatch_event(&event); + + switch (swab32(readl(dev->catas_err.map)) >> 24) { + case MTHCA_CATAS_TYPE_INTERNAL: + type = "internal error"; + break; + case MTHCA_CATAS_TYPE_UPLINK: + type = "uplink bus error"; + break; + case MTHCA_CATAS_TYPE_DDR: + type = "DDR data error"; + break; + case MTHCA_CATAS_TYPE_PARITY: + type = "internal parity error"; + break; + default: + type = "unknown error"; + break; + } + + mthca_err(dev, "Catastrophic error detected: %s\n", type); + for (i = 0; i < dev->catas_err.size; ++i) + mthca_err(dev, " buf[%02x]: %08x\n", + i, swab32(readl(dev->catas_err.map + i))); +} + +static void poll_catas(unsigned long dev_ptr) +{ + struct mthca_dev *dev = (struct mthca_dev *) dev_ptr; + unsigned long flags; + int i; + + for (i = 0; i < dev->catas_err.size; ++i) + if (readl(dev->catas_err.map + i)) { + handle_catas(dev); + return; + } + + spin_lock_irqsave(&catas_lock, flags); + if (dev->catas_err.stop) + mod_timer(&dev->catas_err.timer, + jiffies + MTHCA_CATAS_POLL_INTERVAL); + spin_unlock_irqrestore(&catas_lock, flags); + + return; +} + +void mthca_start_catas_poll(struct mthca_dev *dev) +{ + unsigned long addr; + + init_timer(&dev->catas_err.timer); + dev->catas_err.stop = 0; + dev->catas_err.map = NULL; + + addr = pci_resource_start(dev->pdev, 0) + + ((pci_resource_len(dev->pdev, 0) - 1) & + dev->catas_err.addr); + + if (!request_mem_region(addr, dev->catas_err.size * 4, + DRV_NAME)) { + mthca_warn(dev, "couldn't request catastrophic error region " + "at 0x%lx/0x%x\n", addr, dev->catas_err.size * 4); + return; + } + + dev->catas_err.map = ioremap(addr, dev->catas_err.size * 4); + if (!dev->catas_err.map) { + mthca_warn(dev, "couldn't map catastrophic error region " + "at 0x%lx/0x%x\n", addr, dev->catas_err.size * 4); + release_mem_region(addr, dev->catas_err.size * 4); + return; + } + + dev->catas_err.timer.data = (unsigned long) dev; + dev->catas_err.timer.function = poll_catas; + dev->catas_err.timer.expires = jiffies + MTHCA_CATAS_POLL_INTERVAL; + add_timer(&dev->catas_err.timer); +} + +void mthca_stop_catas_poll(struct mthca_dev *dev) +{ + spin_lock_irq(&catas_lock); + dev->catas_err.stop = 1; + spin_unlock_irq(&catas_lock); + + del_timer_sync(&dev->catas_err.timer); + + if (dev->catas_err.map) { + iounmap(dev->catas_err.map); + release_mem_region(pci_resource_start(dev->pdev, 0) + + ((pci_resource_len(dev->pdev, 0) - 1) & + dev->catas_err.addr), + dev->catas_err.size * 4); + } +} diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 1bd7dc8f778c..9220473dbfbd 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. * Copyright (c) 2005 Mellanox Technologies. All rights reserved. + * Copyright (c) 2005 Cisco Systems. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -706,9 +707,13 @@ int mthca_QUERY_FW(struct mthca_dev *dev, u8 *status) MTHCA_GET(lg, outbox, QUERY_FW_MAX_CMD_OFFSET); dev->cmd.max_cmds = 1 << lg; + MTHCA_GET(dev->catas_err.addr, outbox, QUERY_FW_ERR_START_OFFSET); + MTHCA_GET(dev->catas_err.size, outbox, QUERY_FW_ERR_SIZE_OFFSET); mthca_dbg(dev, "FW version %012llx, max commands %d\n", (unsigned long long) dev->fw_ver, dev->cmd.max_cmds); + mthca_dbg(dev, "Catastrophic error buffer at 0x%llx, size 0x%x\n", + (unsigned long long) dev->catas_err.addr, dev->catas_err.size); if (mthca_is_memfree(dev)) { MTHCA_GET(dev->fw.arbel.fw_pages, outbox, QUERY_FW_SIZE_OFFSET); diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index f106bac0f925..7e68bd4a3780 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -258,6 +258,14 @@ struct mthca_mcg_table { struct mthca_icm_table *table; }; +struct mthca_catas_err { + u64 addr; + u32 __iomem *map; + unsigned long stop; + u32 size; + struct timer_list timer; +}; + struct mthca_dev { struct ib_device ib_dev; struct pci_dev *pdev; @@ -318,6 +326,8 @@ struct mthca_dev { struct mthca_av_table av_table; struct mthca_mcg_table mcg_table; + struct mthca_catas_err catas_err; + struct mthca_uar driver_uar; struct mthca_db_table *db_tab; struct mthca_pd driver_pd; @@ -405,6 +415,9 @@ void mthca_cleanup_mcg_table(struct mthca_dev *dev); int mthca_register_device(struct mthca_dev *dev); void mthca_unregister_device(struct mthca_dev *dev); +void mthca_start_catas_poll(struct mthca_dev *dev); +void mthca_stop_catas_poll(struct mthca_dev *dev); + int mthca_uar_alloc(struct mthca_dev *dev, struct mthca_uar *uar); void mthca_uar_free(struct mthca_dev *dev, struct mthca_uar *uar); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 9e911a1ea415..1b9477edbd7b 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1175,10 +1175,13 @@ int mthca_register_device(struct mthca_dev *dev) } } + mthca_start_catas_poll(dev); + return 0; } void mthca_unregister_device(struct mthca_dev *dev) { + mthca_stop_catas_poll(dev); ib_unregister_device(&dev->ib_dev); } -- GitLab From c1902aae322952f8726469a6657df7b9d5c794fe Mon Sep 17 00:00:00 2001 From: Dean Roe Date: Thu, 27 Oct 2005 15:41:04 -0500 Subject: [PATCH 0430/1519] [IA64] - Avoid slow TLB purges on SGI Altix systems flush_tlb_all() can be a scaling issue on large SGI Altix systems since it uses the global call_lock and always executes on all cpus. When a process enters flush_tlb_range() to purge TLBs for another process, it is possible to avoid flush_tlb_all() and instead allow sn2_global_tlb_purge() to purge TLBs only where necessary. This patch modifies flush_tlb_range() so that this case can be handled by platform TLB purge functions and updates ia64_global_tlb_purge() accordingly. sn2_global_tlb_purge() now calculates the region register value from the mm argument introduced with this patch. Signed-off-by: Dean Roe Signed-off-by: Tony Luck --- arch/ia64/mm/tlb.c | 16 +++++++++------- arch/ia64/sn/kernel/sn2/sn2_smp.c | 31 +++++++++++++++++++------------ include/asm-ia64/machvec.h | 2 +- 3 files changed, 29 insertions(+), 20 deletions(-) diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index 464557e4ed82..99ea8c70f408 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -86,10 +86,15 @@ wrap_mmu_context (struct mm_struct *mm) } void -ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits) +ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, unsigned long end, unsigned long nbits) { static DEFINE_SPINLOCK(ptcg_lock); + if (mm != current->active_mm) { + flush_tlb_all(); + return; + } + /* HW requires global serialization of ptc.ga. */ spin_lock(&ptcg_lock); { @@ -135,15 +140,12 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long unsigned long size = end - start; unsigned long nbits; +#ifndef CONFIG_SMP if (mm != current->active_mm) { - /* this does happen, but perhaps it's not worth optimizing for? */ -#ifdef CONFIG_SMP - flush_tlb_all(); -#else mm->context = 0; -#endif return; } +#endif nbits = ia64_fls(size + 0xfff); while (unlikely (((1UL << nbits) & purge.mask) == 0) && (nbits < purge.max_bits)) @@ -153,7 +155,7 @@ flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long start &= ~((1UL << nbits) - 1); # ifdef CONFIG_SMP - platform_global_tlb_purge(start, end, nbits); + platform_global_tlb_purge(mm, start, end, nbits); # else do { ia64_ptcl(start, (nbits<<2)); diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 0a4ee50c302f..49b530c39a42 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -177,6 +177,7 @@ void sn_tlb_migrate_finish(struct mm_struct *mm) /** * sn2_global_tlb_purge - globally purge translation cache of virtual address range + * @mm: mm_struct containing virtual address range * @start: start of virtual address range * @end: end of virtual address range * @nbits: specifies number of bytes to purge per instruction (num = 1<<(nbits & 0xfc)) @@ -188,21 +189,22 @@ void sn_tlb_migrate_finish(struct mm_struct *mm) * - cpu_vm_mask is a bit mask that indicates which cpus have loaded the context. * - cpu_vm_mask is converted into a nodemask of the nodes containing the * cpus in cpu_vm_mask. - * - if only one bit is set in cpu_vm_mask & it is the current cpu, - * then only the local TLB needs to be flushed. This flushing can be done - * using ptc.l. This is the common case & avoids the global spinlock. + * - if only one bit is set in cpu_vm_mask & it is the current cpu & the + * process is purging its own virtual address range, then only the + * local TLB needs to be flushed. This flushing can be done using + * ptc.l. This is the common case & avoids the global spinlock. * - if multiple cpus have loaded the context, then flushing has to be * done with ptc.g/MMRs under protection of the global ptc_lock. */ void -sn2_global_tlb_purge(unsigned long start, unsigned long end, - unsigned long nbits) +sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start, + unsigned long end, unsigned long nbits) { int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0; + int mymm = (mm == current->active_mm); volatile unsigned long *ptc0, *ptc1; - unsigned long itc, itc2, flags, data0 = 0, data1 = 0; - struct mm_struct *mm = current->active_mm; + unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value; short nasids[MAX_NUMNODES], nix; nodemask_t nodes_flushed; @@ -216,9 +218,12 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, i++; } + if (i == 0) + return; + preempt_disable(); - if (likely(i == 1 && lcpu == smp_processor_id())) { + if (likely(i == 1 && lcpu == smp_processor_id() && mymm)) { do { ia64_ptcl(start, nbits << 2); start += (1UL << nbits); @@ -229,7 +234,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, return; } - if (atomic_read(&mm->mm_users) == 1) { + if (atomic_read(&mm->mm_users) == 1 && mymm) { flush_tlb_mm(mm); __get_cpu_var(ptcstats).change_rid++; preempt_enable(); @@ -241,11 +246,13 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, for_each_node_mask(cnode, nodes_flushed) nasids[nix++] = cnodeid_to_nasid(cnode); + rr_value = (mm->context << 3) | REGION_NUMBER(start); + shub1 = is_shub1(); if (shub1) { data0 = (1UL << SH1_PTC_0_A_SHFT) | (nbits << SH1_PTC_0_PS_SHFT) | - ((ia64_get_rr(start) >> 8) << SH1_PTC_0_RID_SHFT) | + (rr_value << SH1_PTC_0_RID_SHFT) | (1UL << SH1_PTC_0_START_SHFT); ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_0); ptc1 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_1); @@ -254,7 +261,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, (nbits << SH2_PTC_PS_SHFT) | (1UL << SH2_PTC_START_SHFT); ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH2_PTC + - ((ia64_get_rr(start) >> 8) << SH2_PTC_RID_SHFT) ); + (rr_value << SH2_PTC_RID_SHFT)); ptc1 = NULL; } @@ -275,7 +282,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end, data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK); for (i = 0; i < nix; i++) { nasid = nasids[i]; - if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) { + if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid && mymm)) { ia64_ptcga(start, nbits << 2); ia64_srlz_i(); } else { diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h index 79e89a7db566..522c7f5ba8ce 100644 --- a/include/asm-ia64/machvec.h +++ b/include/asm-ia64/machvec.h @@ -26,7 +26,7 @@ typedef void ia64_mv_cpu_init_t (void); typedef void ia64_mv_irq_init_t (void); typedef void ia64_mv_send_ipi_t (int, int, int, int); typedef void ia64_mv_timer_interrupt_t (int, void *, struct pt_regs *); -typedef void ia64_mv_global_tlb_purge_t (unsigned long, unsigned long, unsigned long); +typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long); typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *); typedef unsigned int ia64_mv_local_vector_to_irq (u8); typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *); -- GitLab From 6fa05b17367f04ada501e89d3b9cb56adec0d930 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 19:08:18 -0400 Subject: [PATCH 0431/1519] Revert "RPC: stops the release_pipe() funtion from being called twice" This reverts 747c5534c9a6da4aa87e7cdc2209ea98ea27f381 commit. --- net/sunrpc/rpc_pipe.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 649d609e7d94..ded6c63f11ec 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -177,8 +177,6 @@ rpc_pipe_release(struct inode *inode, struct file *filp) __rpc_purge_upcall(inode, -EPIPE); if (rpci->ops->release_pipe) rpci->ops->release_pipe(inode); - if (!rpci->nreaders && !rpci->nwriters) - rpci->ops = NULL; out: up(&inode->i_sem); return 0; -- GitLab From 34123da66e613602de5a886b05c875b6a91b8ed2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 19:10:09 -0400 Subject: [PATCH 0432/1519] NFS: Fix a bad cast in nfs3_read_done Signed-off-by: Trond Myklebust --- fs/nfs/nfs3proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index df80477c5af4..e4a1cd48195e 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -735,7 +735,7 @@ extern u32 *nfs3_decode_dirent(u32 *, struct nfs_entry *, int); static void nfs3_read_done(struct rpc_task *task) { - struct nfs_write_data *data = (struct nfs_write_data *) task->tk_calldata; + struct nfs_read_data *data = (struct nfs_read_data *) task->tk_calldata; if (nfs3_async_handle_jukebox(task)) return; -- GitLab From 4ac0068f44f192f2de95a7bb36df3e19767a45fb Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Thu, 27 Oct 2005 10:29:08 -0500 Subject: [PATCH 0433/1519] [IA64] ptrace - find memory sharers on children list In arch/ia64/kernel/ptrace.c there is a test for a peek or poke of a register image (in register backing storage). The test can be unnecessarily long (and occurs while holding the tasklist_lock). Especially long on a large system with thousands of active tasks. The ptrace caller (presumably a debugger) specifies the pid of its target and an address to peek or poke. But the debugger could be attached to several tasks. The idea of find_thread_for_addr() is to find whether the target address is in the RBS for any of those tasks. Currently it searches the thread-list of the target pid. If that search does not find a match, and the shared mm-struct's user count indicates that there are other tasks sharing this address space (a rare occurrence), a search is made of all the tasks in the system. Another approach can drastically shorten this procedure. It depends upon the fact that in order to peek or poke from/to any task, the debugger must first attach to that task. And when it does, the attached task is made a child of the debugger (is chained to its children list). Therefore we can search just the debugger's children list. Signed-off-by: Cliff Wickman Signed-off-by: Tony Luck --- arch/ia64/kernel/ptrace.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index bbb8bc7c0552..9a9c1bd01dbc 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -589,6 +589,7 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr) { struct task_struct *g, *p; struct mm_struct *mm; + struct list_head *this, *next; int mm_users; if (!(mm = get_task_mm(child))) @@ -600,28 +601,21 @@ find_thread_for_addr (struct task_struct *child, unsigned long addr) goto out; /* not multi-threaded */ /* - * First, traverse the child's thread-list. Good for scalability with - * NPTL-threads. + * Traverse the current process' children list. Every task that + * one attaches to becomes a child. And it is only attached children + * of the debugger that are of interest (ptrace_check_attach checks + * for this). */ - p = child; - do { - if (thread_matches(p, addr)) { - child = p; - goto out; - } - if (mm_users-- <= 1) - goto out; - } while ((p = next_thread(p)) != child); - - do_each_thread(g, p) { - if (child->mm != mm) + list_for_each_safe(this, next, ¤t->children) { + p = list_entry(this, struct task_struct, sibling); + if (p->mm != mm) continue; - if (thread_matches(p, addr)) { child = p; goto out; } - } while_each_thread(g, p); + } + out: mmput(mm); return child; -- GitLab From 0e574af1be5f569a5d7f2800333b0bfb358a5e34 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:38 -0400 Subject: [PATCH 0434/1519] NFS: Cleanup initialisation of struct nfs_fattr Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 1 + fs/nfs/nfs3proc.c | 58 +++++++++++++++++++++--------------------- fs/nfs/nfs4proc.c | 43 +++++++++++++++---------------- fs/nfs/proc.c | 26 +++++++++---------- fs/nfs/read.c | 1 + fs/nfs/write.c | 2 ++ include/linux/nfs_fs.h | 5 ++++ 7 files changed, 71 insertions(+), 65 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index eb50c19fc253..b8a73045e9a0 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -532,6 +532,7 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir) my_entry.eof = 0; my_entry.fh = &fh; my_entry.fattr = &fattr; + nfs_fattr_init(&fattr); desc->entry = &my_entry; while(!desc->entry->eof) { diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index e4a1cd48195e..4b1b48b139f6 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -78,7 +78,7 @@ nfs3_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("%s: call fsinfo\n", __FUNCTION__); - info->fattr->valid = 0; + nfs_fattr_init(info->fattr); status = rpc_call(server->client_sys, NFS3PROC_FSINFO, fhandle, info, 0); dprintk("%s: reply fsinfo: %d\n", __FUNCTION__, status); if (!(info->fattr->valid & NFS_ATTR_FATTR)) { @@ -98,7 +98,7 @@ nfs3_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("NFS call getattr\n"); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call(server->client, NFS3PROC_GETATTR, fhandle, fattr, 0); dprintk("NFS reply getattr: %d\n", status); @@ -117,7 +117,7 @@ nfs3_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr, int status; dprintk("NFS call setattr\n"); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call(NFS_CLIENT(inode), NFS3PROC_SETATTR, &arg, fattr, 0); if (status == 0) nfs_setattr_update_inode(inode, sattr); @@ -143,8 +143,8 @@ nfs3_proc_lookup(struct inode *dir, struct qstr *name, int status; dprintk("NFS call lookup %s\n", name->name); - dir_attr.valid = 0; - fattr->valid = 0; + nfs_fattr_init(&dir_attr); + nfs_fattr_init(fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_LOOKUP, &arg, &res, 0); if (status >= 0 && !(fattr->valid & NFS_ATTR_FATTR)) status = rpc_call(NFS_CLIENT(dir), NFS3PROC_GETATTR, @@ -174,7 +174,6 @@ static int nfs3_proc_access(struct inode *inode, struct nfs_access_entry *entry) int status; dprintk("NFS call access\n"); - fattr.valid = 0; if (mode & MAY_READ) arg.access |= NFS3_ACCESS_READ; @@ -189,6 +188,7 @@ static int nfs3_proc_access(struct inode *inode, struct nfs_access_entry *entry) if (mode & MAY_EXEC) arg.access |= NFS3_ACCESS_EXECUTE; } + nfs_fattr_init(&fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0); nfs_refresh_inode(inode, &fattr); if (status == 0) { @@ -217,7 +217,7 @@ static int nfs3_proc_readlink(struct inode *inode, struct page *page, int status; dprintk("NFS call readlink\n"); - fattr.valid = 0; + nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(inode), NFS3PROC_READLINK, &args, &fattr, 0); nfs_refresh_inode(inode, &fattr); @@ -240,7 +240,7 @@ static int nfs3_proc_read(struct nfs_read_data *rdata) dprintk("NFS call read %d @ %Ld\n", rdata->args.count, (long long) rdata->args.offset); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags); if (status >= 0) nfs_refresh_inode(inode, fattr); @@ -263,7 +263,7 @@ static int nfs3_proc_write(struct nfs_write_data *wdata) dprintk("NFS call write %d @ %Ld\n", wdata->args.count, (long long) wdata->args.offset); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, rpcflags); if (status >= 0) nfs_refresh_inode(inode, fattr); @@ -285,7 +285,7 @@ static int nfs3_proc_commit(struct nfs_write_data *cdata) dprintk("NFS call commit %d @ %Ld\n", cdata->args.count, (long long) cdata->args.offset); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0); if (status >= 0) nfs_refresh_inode(inode, fattr); @@ -329,8 +329,8 @@ nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, sattr->ia_mode &= ~current->fs->umask; again: - dir_attr.valid = 0; - fattr.valid = 0; + nfs_fattr_init(&dir_attr); + nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_CREATE, &arg, &res, 0); nfs_refresh_inode(dir, &dir_attr); @@ -401,7 +401,7 @@ nfs3_proc_remove(struct inode *dir, struct qstr *name) int status; dprintk("NFS call remove %s\n", name->name); - dir_attr.valid = 0; + nfs_fattr_init(&dir_attr); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); nfs_refresh_inode(dir, &dir_attr); dprintk("NFS reply remove: %d\n", status); @@ -422,7 +422,7 @@ nfs3_proc_unlink_setup(struct rpc_message *msg, struct dentry *dir, struct qstr ptr->arg.fh = NFS_FH(dir->d_inode); ptr->arg.name = name->name; ptr->arg.len = name->len; - ptr->res.valid = 0; + nfs_fattr_init(&ptr->res); msg->rpc_proc = &nfs3_procedures[NFS3PROC_REMOVE]; msg->rpc_argp = &ptr->arg; msg->rpc_resp = &ptr->res; @@ -465,8 +465,8 @@ nfs3_proc_rename(struct inode *old_dir, struct qstr *old_name, int status; dprintk("NFS call rename %s -> %s\n", old_name->name, new_name->name); - old_dir_attr.valid = 0; - new_dir_attr.valid = 0; + nfs_fattr_init(&old_dir_attr); + nfs_fattr_init(&new_dir_attr); status = rpc_call(NFS_CLIENT(old_dir), NFS3PROC_RENAME, &arg, &res, 0); nfs_refresh_inode(old_dir, &old_dir_attr); nfs_refresh_inode(new_dir, &new_dir_attr); @@ -491,8 +491,8 @@ nfs3_proc_link(struct inode *inode, struct inode *dir, struct qstr *name) int status; dprintk("NFS call link %s\n", name->name); - dir_attr.valid = 0; - fattr.valid = 0; + nfs_fattr_init(&dir_attr); + nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(inode), NFS3PROC_LINK, &arg, &res, 0); nfs_refresh_inode(dir, &dir_attr); nfs_refresh_inode(inode, &fattr); @@ -524,8 +524,8 @@ nfs3_proc_symlink(struct inode *dir, struct qstr *name, struct qstr *path, if (path->len > NFS3_MAXPATHLEN) return -ENAMETOOLONG; dprintk("NFS call symlink %s -> %s\n", name->name, path->name); - dir_attr.valid = 0; - fattr->valid = 0; + nfs_fattr_init(&dir_attr); + nfs_fattr_init(fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_SYMLINK, &arg, &res, 0); nfs_refresh_inode(dir, &dir_attr); dprintk("NFS reply symlink: %d\n", status); @@ -552,11 +552,11 @@ nfs3_proc_mkdir(struct inode *dir, struct dentry *dentry, struct iattr *sattr) int status; dprintk("NFS call mkdir %s\n", dentry->d_name.name); - dir_attr.valid = 0; - fattr.valid = 0; sattr->ia_mode &= ~current->fs->umask; + nfs_fattr_init(&dir_attr); + nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_MKDIR, &arg, &res, 0); nfs_refresh_inode(dir, &dir_attr); if (status != 0) @@ -582,7 +582,7 @@ nfs3_proc_rmdir(struct inode *dir, struct qstr *name) int status; dprintk("NFS call rmdir %s\n", name->name); - dir_attr.valid = 0; + nfs_fattr_init(&dir_attr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_RMDIR, &arg, &dir_attr, 0); nfs_refresh_inode(dir, &dir_attr); dprintk("NFS reply rmdir: %d\n", status); @@ -634,7 +634,7 @@ nfs3_proc_readdir(struct dentry *dentry, struct rpc_cred *cred, dprintk("NFS call readdir%s %d\n", plus? "plus" : "", (unsigned int) cookie); - dir_attr.valid = 0; + nfs_fattr_init(&dir_attr); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); nfs_refresh_inode(dir, &dir_attr); dprintk("NFS reply readdir: %d\n", status); @@ -676,8 +676,8 @@ nfs3_proc_mknod(struct inode *dir, struct dentry *dentry, struct iattr *sattr, sattr->ia_mode &= ~current->fs->umask; - dir_attr.valid = 0; - fattr.valid = 0; + nfs_fattr_init(&dir_attr); + nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_MKNOD, &arg, &res, 0); nfs_refresh_inode(dir, &dir_attr); if (status != 0) @@ -698,7 +698,7 @@ nfs3_proc_statfs(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("NFS call fsstat\n"); - stat->fattr->valid = 0; + nfs_fattr_init(stat->fattr); status = rpc_call(server->client, NFS3PROC_FSSTAT, fhandle, stat, 0); dprintk("NFS reply statfs: %d\n", status); return status; @@ -711,7 +711,7 @@ nfs3_proc_fsinfo(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("NFS call fsinfo\n"); - info->fattr->valid = 0; + nfs_fattr_init(info->fattr); status = rpc_call(server->client_sys, NFS3PROC_FSINFO, fhandle, info, 0); dprintk("NFS reply fsinfo: %d\n", status); return status; @@ -724,7 +724,7 @@ nfs3_proc_pathconf(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("NFS call pathconf\n"); - info->fattr->valid = 0; + nfs_fattr_init(info->fattr); status = rpc_call(server->client, NFS3PROC_PATHCONF, fhandle, info, 0); dprintk("NFS reply pathconf: %d\n", status); return status; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 9c1da34036aa..2a759e8e387c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -494,9 +494,7 @@ static int _nfs4_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st struct inode *inode = state->inode; struct nfs_server *server = NFS_SERVER(dir); struct nfs_delegation *delegation = NFS_I(inode)->delegation; - struct nfs_fattr f_attr = { - .valid = 0, - }; + struct nfs_fattr f_attr; struct nfs_openargs o_arg = { .fh = NFS_FH(dir), .open_flags = state->state, @@ -522,6 +520,7 @@ static int _nfs4_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st status = -ENOMEM; if (o_arg.seqid == NULL) goto out; + nfs_fattr_init(&f_attr); status = _nfs4_proc_open(dir, sp, &o_arg, &o_res); if (status != 0) goto out_nodeleg; @@ -692,9 +691,7 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st struct nfs4_client *clp = server->nfs4_state; struct inode *inode = NULL; int status; - struct nfs_fattr f_attr = { - .valid = 0, - }; + struct nfs_fattr f_attr; struct nfs_openargs o_arg = { .fh = NFS_FH(dir), .open_flags = flags, @@ -726,6 +723,7 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st o_arg.seqid = nfs_alloc_seqid(&sp->so_seqid); if (o_arg.seqid == NULL) return -ENOMEM; + nfs_fattr_init(&f_attr); status = _nfs4_proc_open(dir, sp, &o_arg, &o_res); if (status != 0) goto out_err; @@ -824,7 +822,7 @@ static int _nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr, }; int status; - fattr->valid = 0; + nfs_fattr_init(fattr); if (state != NULL) { msg.rpc_cred = state->owner->so_cred; @@ -1107,13 +1105,12 @@ static int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fh static int _nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fsinfo *info) { - struct nfs_fattr * fattr = info->fattr; struct nfs4_lookup_root_arg args = { .bitmask = nfs4_fattr_bitmap, }; struct nfs4_lookup_res res = { .server = server, - .fattr = fattr, + .fattr = info->fattr, .fh = fhandle, }; struct rpc_message msg = { @@ -1121,7 +1118,7 @@ static int _nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle, .rpc_argp = &args, .rpc_resp = &res, }; - fattr->valid = 0; + nfs_fattr_init(info->fattr); return rpc_call_sync(server->client, &msg, 0); } @@ -1184,7 +1181,7 @@ static int nfs4_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle, q.len = p - q.name; do { - fattr->valid = 0; + nfs_fattr_init(fattr); status = nfs4_handle_exception(server, rpc_call_sync(server->client, &msg, 0), &exception); @@ -1221,7 +1218,7 @@ static int _nfs4_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle, .rpc_resp = &res, }; - fattr->valid = 0; + nfs_fattr_init(fattr); return rpc_call_sync(server->client, &msg, 0); } @@ -1263,7 +1260,7 @@ nfs4_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr, struct nfs4_state *state; int status; - fattr->valid = 0; + nfs_fattr_init(fattr); cred = rpcauth_lookupcred(NFS_SERVER(inode)->client->cl_auth, 0); if (IS_ERR(cred)) @@ -1309,7 +1306,7 @@ static int _nfs4_proc_lookup(struct inode *dir, struct qstr *name, .rpc_resp = &res, }; - fattr->valid = 0; + nfs_fattr_init(fattr); dprintk("NFS call lookup %s\n", name->name); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); @@ -1458,7 +1455,7 @@ static int _nfs4_proc_read(struct nfs_read_data *rdata) dprintk("NFS call read %d @ %Ld\n", rdata->args.count, (long long) rdata->args.offset); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(server->client, &msg, flags); if (!status) renew_lease(server, timestamp); @@ -1495,7 +1492,7 @@ static int _nfs4_proc_write(struct nfs_write_data *wdata) dprintk("NFS call write %d @ %Ld\n", wdata->args.count, (long long) wdata->args.offset); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(server->client, &msg, rpcflags); dprintk("NFS reply write: %d\n", status); return status; @@ -1529,7 +1526,7 @@ static int _nfs4_proc_commit(struct nfs_write_data *cdata) dprintk("NFS call commit %d @ %Ld\n", cdata->args.count, (long long) cdata->args.offset); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(server->client, &msg, 0); dprintk("NFS reply commit: %d\n", status); return status; @@ -1769,7 +1766,7 @@ static int _nfs4_proc_symlink(struct inode *dir, struct qstr *name, if (path->len > NFS4_MAXPATHLEN) return -ENAMETOOLONG; arg.u.symlink = path; - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); if (!status) @@ -1818,7 +1815,7 @@ static int _nfs4_proc_mkdir(struct inode *dir, struct dentry *dentry, }; int status; - fattr.valid = 0; + nfs_fattr_init(&fattr); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); if (!status) { @@ -1916,7 +1913,7 @@ static int _nfs4_proc_mknod(struct inode *dir, struct dentry *dentry, int status; int mode = sattr->ia_mode; - fattr.valid = 0; + nfs_fattr_init(&fattr); BUG_ON(!(sattr->ia_valid & ATTR_MODE)); BUG_ON(!S_ISFIFO(mode) && !S_ISBLK(mode) && !S_ISCHR(mode) && !S_ISSOCK(mode)); @@ -1969,7 +1966,7 @@ static int _nfs4_proc_statfs(struct nfs_server *server, struct nfs_fh *fhandle, .rpc_resp = fsstat, }; - fsstat->fattr->valid = 0; + nfs_fattr_init(fsstat->fattr); return rpc_call_sync(server->client, &msg, 0); } @@ -2016,7 +2013,7 @@ static int nfs4_do_fsinfo(struct nfs_server *server, struct nfs_fh *fhandle, str static int nfs4_proc_fsinfo(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fsinfo *fsinfo) { - fsinfo->fattr->valid = 0; + nfs_fattr_init(fsinfo->fattr); return nfs4_do_fsinfo(server, fhandle, fsinfo); } @@ -2039,7 +2036,7 @@ static int _nfs4_proc_pathconf(struct nfs_server *server, struct nfs_fh *fhandle return 0; } - pathconf->fattr->valid = 0; + nfs_fattr_init(pathconf->fattr); return rpc_call_sync(server->client, &msg, 0); } diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c index 8fef86523d7f..5ef28f08f424 100644 --- a/fs/nfs/proc.c +++ b/fs/nfs/proc.c @@ -61,7 +61,7 @@ nfs_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("%s: call getattr\n", __FUNCTION__); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call(server->client_sys, NFSPROC_GETATTR, fhandle, fattr, 0); dprintk("%s: reply getattr: %d\n", __FUNCTION__, status); if (status) @@ -93,7 +93,7 @@ nfs_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("NFS call getattr\n"); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call(server->client, NFSPROC_GETATTR, fhandle, fattr, 0); dprintk("NFS reply getattr: %d\n", status); @@ -112,7 +112,7 @@ nfs_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr, int status; dprintk("NFS call setattr\n"); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call(NFS_CLIENT(inode), NFSPROC_SETATTR, &arg, fattr, 0); if (status == 0) nfs_setattr_update_inode(inode, sattr); @@ -136,7 +136,7 @@ nfs_proc_lookup(struct inode *dir, struct qstr *name, int status; dprintk("NFS call lookup %s\n", name->name); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call(NFS_CLIENT(dir), NFSPROC_LOOKUP, &arg, &res, 0); dprintk("NFS reply lookup: %d\n", status); return status; @@ -174,7 +174,7 @@ static int nfs_proc_read(struct nfs_read_data *rdata) dprintk("NFS call read %d @ %Ld\n", rdata->args.count, (long long) rdata->args.offset); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags); if (status >= 0) { nfs_refresh_inode(inode, fattr); @@ -203,7 +203,7 @@ static int nfs_proc_write(struct nfs_write_data *wdata) dprintk("NFS call write %d @ %Ld\n", wdata->args.count, (long long) wdata->args.offset); - fattr->valid = 0; + nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags); if (status >= 0) { nfs_refresh_inode(inode, fattr); @@ -232,7 +232,7 @@ nfs_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, }; int status; - fattr.valid = 0; + nfs_fattr_init(&fattr); dprintk("NFS call create %s\n", dentry->d_name.name); status = rpc_call(NFS_CLIENT(dir), NFSPROC_CREATE, &arg, &res, 0); if (status == 0) @@ -273,12 +273,12 @@ nfs_proc_mknod(struct inode *dir, struct dentry *dentry, struct iattr *sattr, sattr->ia_size = new_encode_dev(rdev);/* get out your barf bag */ } - fattr.valid = 0; + nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFSPROC_CREATE, &arg, &res, 0); if (status == -EINVAL && S_ISFIFO(mode)) { sattr->ia_mode = mode; - fattr.valid = 0; + nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFSPROC_CREATE, &arg, &res, 0); } if (status == 0) @@ -391,7 +391,7 @@ nfs_proc_symlink(struct inode *dir, struct qstr *name, struct qstr *path, if (path->len > NFS2_MAXPATHLEN) return -ENAMETOOLONG; dprintk("NFS call symlink %s -> %s\n", name->name, path->name); - fattr->valid = 0; + nfs_fattr_init(fattr); fhandle->size = 0; status = rpc_call(NFS_CLIENT(dir), NFSPROC_SYMLINK, &arg, NULL, 0); dprintk("NFS reply symlink: %d\n", status); @@ -416,7 +416,7 @@ nfs_proc_mkdir(struct inode *dir, struct dentry *dentry, struct iattr *sattr) int status; dprintk("NFS call mkdir %s\n", dentry->d_name.name); - fattr.valid = 0; + nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFSPROC_MKDIR, &arg, &res, 0); if (status == 0) status = nfs_instantiate(dentry, &fhandle, &fattr); @@ -484,7 +484,7 @@ nfs_proc_statfs(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("NFS call statfs\n"); - stat->fattr->valid = 0; + nfs_fattr_init(stat->fattr); status = rpc_call(server->client, NFSPROC_STATFS, fhandle, &fsinfo, 0); dprintk("NFS reply statfs: %d\n", status); if (status) @@ -507,7 +507,7 @@ nfs_proc_fsinfo(struct nfs_server *server, struct nfs_fh *fhandle, int status; dprintk("NFS call fsinfo\n"); - info->fattr->valid = 0; + nfs_fattr_init(info->fattr); status = rpc_call(server->client, NFSPROC_STATFS, fhandle, &fsinfo, 0); dprintk("NFS reply fsinfo: %d\n", status); if (status) diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 9758ebd49905..43b03b19731b 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -215,6 +215,7 @@ static void nfs_read_rpcsetup(struct nfs_page *req, struct nfs_read_data *data, data->res.fattr = &data->fattr; data->res.count = count; data->res.eof = 0; + nfs_fattr_init(&data->fattr); NFS_PROTO(inode)->read_setup(data); diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 5130eda231d7..819a65f5071f 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -870,6 +870,7 @@ static void nfs_write_rpcsetup(struct nfs_page *req, data->res.fattr = &data->fattr; data->res.count = count; data->res.verf = &data->verf; + nfs_fattr_init(&data->fattr); NFS_PROTO(inode)->write_setup(data, how); @@ -1237,6 +1238,7 @@ static void nfs_commit_rpcsetup(struct list_head *head, data->res.count = 0; data->res.fattr = &data->fattr; data->res.verf = &data->verf; + nfs_fattr_init(&data->fattr); NFS_PROTO(inode)->commit_setup(data, how); diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 7bac2785c6e4..8120fd68dee5 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -316,6 +316,11 @@ extern void nfs_file_clear_open_context(struct file *filp); /* linux/net/ipv4/ipconfig.c: trims ip addr off front of name, too. */ extern u32 root_nfs_parse_addr(char *name); /*__init*/ +static inline void nfs_fattr_init(struct nfs_fattr *fattr) +{ + fattr->valid = 0; +} + /* * linux/fs/nfs/file.c */ -- GitLab From 913a70fc170530f7e1ff0693595155457cc6d0ca Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:38 -0400 Subject: [PATCH 0435/1519] NFS: Convert cache_change_attribute into a jiffy-based value Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 8 ++++---- include/linux/nfs_fs.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 65d5ab45ddc5..449df8c8aa31 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1135,7 +1135,7 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode) * We may need to keep the attributes marked as invalid if * we raced with nfs_end_attr_update(). */ - if (verifier == nfsi->cache_change_attribute) + if (time_after_eq(verifier, nfsi->cache_change_attribute)) nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME); spin_unlock(&inode->i_lock); @@ -1202,7 +1202,7 @@ void nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping) if (S_ISDIR(inode->i_mode)) { memset(nfsi->cookieverf, 0, sizeof(nfsi->cookieverf)); /* This ensures we revalidate child dentries */ - nfsi->cache_change_attribute++; + nfsi->cache_change_attribute = jiffies; } spin_unlock(&inode->i_lock); @@ -1242,7 +1242,7 @@ void nfs_end_data_update(struct inode *inode) nfsi->cache_validity |= NFS_INO_INVALID_DATA; spin_unlock(&inode->i_lock); } - nfsi->cache_change_attribute ++; + nfsi->cache_change_attribute = jiffies; atomic_dec(&nfsi->data_updates); } @@ -1391,7 +1391,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign /* Do we perhaps have any outstanding writes? */ if (nfsi->npages == 0) { /* No, but did we race with nfs_end_data_update()? */ - if (verifier == nfsi->cache_change_attribute) { + if (time_after_eq(verifier, nfsi->cache_change_attribute)) { inode->i_size = new_isize; invalid |= NFS_INO_INVALID_DATA; } diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 8120fd68dee5..abf890f5fbfb 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -280,7 +280,7 @@ static inline long nfs_save_change_attribute(struct inode *inode) static inline int nfs_verify_change_attribute(struct inode *inode, unsigned long chattr) { return !nfs_caches_unstable(inode) - && chattr == NFS_I(inode)->cache_change_attribute; + && time_after_eq(chattr, NFS_I(inode)->cache_change_attribute); } /* -- GitLab From 33801147a8fda6b04d7e9afe1d42f1c01d3d6837 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:39 -0400 Subject: [PATCH 0436/1519] NFS: Optimise inode attribute cache updates Allow nfs_refresh_inode() also to update attributes on the inode if the RPC call was sent after the last call to nfs_update_inode(). Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 54 ++++++++++++++++++++++++++++++----------- fs/nfs/nfs2xdr.c | 1 - fs/nfs/nfs3xdr.c | 1 - fs/nfs/nfs4xdr.c | 4 +-- include/linux/nfs_fs.h | 2 ++ include/linux/nfs_xdr.h | 2 +- 6 files changed, 44 insertions(+), 20 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 449df8c8aa31..b7d4f8f13ac2 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -785,7 +785,8 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr) else init_special_inode(inode, inode->i_mode, fattr->rdev); - nfsi->read_cache_jiffies = fattr->timestamp; + nfsi->read_cache_jiffies = fattr->time_start; + nfsi->last_updated = jiffies; inode->i_atime = fattr->atime; inode->i_mtime = fattr->mtime; inode->i_ctime = fattr->ctime; @@ -1120,14 +1121,15 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode) goto out; } + spin_lock(&inode->i_lock); status = nfs_update_inode(inode, &fattr, verifier); if (status) { + spin_unlock(&inode->i_lock); dfprintk(PAGECACHE, "nfs_revalidate_inode: (%s/%Ld) refresh failed, error=%d\n", inode->i_sb->s_id, (long long)NFS_FILEID(inode), status); goto out; } - spin_lock(&inode->i_lock); cache_validity = nfsi->cache_validity; nfsi->cache_validity &= ~NFS_INO_REVAL_PAGECACHE; @@ -1247,7 +1249,7 @@ void nfs_end_data_update(struct inode *inode) } /** - * nfs_refresh_inode - verify consistency of the inode attribute cache + * nfs_check_inode_attributes - verify consistency of the inode attribute cache * @inode - pointer to inode * @fattr - updated attributes * @@ -1255,13 +1257,12 @@ void nfs_end_data_update(struct inode *inode) * so that fattr carries weak cache consistency data, then it may * also update the ctime/mtime/change_attribute. */ -int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr) +static int nfs_check_inode_attributes(struct inode *inode, struct nfs_fattr *fattr) { struct nfs_inode *nfsi = NFS_I(inode); loff_t cur_size, new_isize; int data_unstable; - spin_lock(&inode->i_lock); /* Are we in the process of updating data on the server? */ data_unstable = nfs_caches_unstable(inode); @@ -1325,11 +1326,40 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr) if (!timespec_equal(&inode->i_atime, &fattr->atime)) nfsi->cache_validity |= NFS_INO_INVALID_ATIME; - nfsi->read_cache_jiffies = fattr->timestamp; - spin_unlock(&inode->i_lock); + nfsi->read_cache_jiffies = fattr->time_start; return 0; } +/** + * nfs_refresh_inode - try to update the inode attribute cache + * @inode - pointer to inode + * @fattr - updated attributes + * + * Check that an RPC call that returned attributes has not overlapped with + * other recent updates of the inode metadata, then decide whether it is + * safe to do a full update of the inode attributes, or whether just to + * call nfs_check_inode_attributes. + */ +int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr) +{ + struct nfs_inode *nfsi = NFS_I(inode); + int status; + + if ((fattr->valid & NFS_ATTR_FATTR) == 0) + return 0; + spin_lock(&inode->i_lock); + nfsi->cache_validity &= ~NFS_INO_REVAL_PAGECACHE; + if (nfs_verify_change_attribute(inode, fattr->time_start)) + nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME); + if (time_after(fattr->time_start, nfsi->last_updated)) + status = nfs_update_inode(inode, fattr, fattr->time_start); + else + status = nfs_check_inode_attributes(inode, fattr); + + spin_unlock(&inode->i_lock); + return status; +} + /* * Many nfs protocol calls return the new file attributes after * an operation. Here we update the inode to reflect the state @@ -1365,20 +1395,17 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign goto out_err; } - spin_lock(&inode->i_lock); - /* * Make sure the inode's type hasn't changed. */ - if ((inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) { - spin_unlock(&inode->i_lock); + if ((inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) goto out_changed; - } /* * Update the read time so we don't revalidate too often. */ - nfsi->read_cache_jiffies = fattr->timestamp; + nfsi->read_cache_jiffies = fattr->time_start; + nfsi->last_updated = jiffies; /* Are we racing with known updates of the metadata on the server? */ data_unstable = ! (nfs_verify_change_attribute(inode, verifier) || @@ -1467,7 +1494,6 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign if (!nfs_have_delegation(inode, FMODE_READ)) nfsi->cache_validity |= invalid; - spin_unlock(&inode->i_lock); return 0; out_changed: /* diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c index d91b69044a4d..59049e864ca7 100644 --- a/fs/nfs/nfs2xdr.c +++ b/fs/nfs/nfs2xdr.c @@ -143,7 +143,6 @@ xdr_decode_fattr(u32 *p, struct nfs_fattr *fattr) fattr->mode = (fattr->mode & ~S_IFMT) | S_IFIFO; fattr->rdev = 0; } - fattr->timestamp = jiffies; return p; } diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c index db4a904810a4..0498bd36602c 100644 --- a/fs/nfs/nfs3xdr.c +++ b/fs/nfs/nfs3xdr.c @@ -174,7 +174,6 @@ xdr_decode_fattr(u32 *p, struct nfs_fattr *fattr) /* Update the mode bits */ fattr->valid |= (NFS_ATTR_FATTR | NFS_ATTR_FATTR_V3); - fattr->timestamp = jiffies; return p; } diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index cd762648fa9a..8b21de8a06fa 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -2799,10 +2799,8 @@ static int decode_getfattr(struct xdr_stream *xdr, struct nfs_fattr *fattr, cons goto xdr_error; if ((status = decode_attr_time_modify(xdr, bitmap, &fattr->mtime)) != 0) goto xdr_error; - if ((status = verify_attr_len(xdr, savep, attrlen)) == 0) { + if ((status = verify_attr_len(xdr, savep, attrlen)) == 0) fattr->valid = NFS_ATTR_FATTR | NFS_ATTR_FATTR_V3 | NFS_ATTR_FATTR_V4; - fattr->timestamp = jiffies; - } xdr_error: if (status != 0) printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status); diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index abf890f5fbfb..faeaad666ca8 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -141,6 +141,7 @@ struct nfs_inode { unsigned long attrtimeo_timestamp; __u64 change_attr; /* v4 only */ + unsigned long last_updated; /* "Generation counter" for the attribute cache. This is * bumped whenever we update the metadata on the * server. @@ -319,6 +320,7 @@ extern u32 root_nfs_parse_addr(char *name); /*__init*/ static inline void nfs_fattr_init(struct nfs_fattr *fattr) { fattr->valid = 0; + fattr->time_start = jiffies; } /* diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 60086dac11d5..aeaee7e7c51d 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -41,7 +41,7 @@ struct nfs_fattr { __u32 bitmap[2]; /* NFSv4 returned attribute bitmap */ __u64 change_attr; /* NFSv4 change attribute */ __u64 pre_change_attr;/* pre-op NFSv4 change attribute */ - unsigned long timestamp; + unsigned long time_start; }; #define NFS_ATTR_WCC 0x0001 /* pre-op WCC data */ -- GitLab From decf491f3076190262d4c649bed877650623903a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:39 -0400 Subject: [PATCH 0437/1519] NFS: Don't let nfs_end_data_update() clobber attribute update information Since we almost always call nfs_end_data_update() after we called nfs_refresh_inode(), we now end up marking the inode metadata as needing revalidation immediately after having updated it. This patch rearranges things so that we mark the inode as needing revalidation _before_ we call nfs_refresh_inode() on those operations that need it. Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 38 ++++++++++++++++++++++++++++++++------ fs/nfs/nfs3proc.c | 30 +++++++++++++++--------------- fs/nfs/nfs4proc.c | 3 +++ fs/nfs/proc.c | 16 +++++++++++++--- include/linux/nfs_fs.h | 15 ++++++++++----- 5 files changed, 73 insertions(+), 29 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index b7d4f8f13ac2..6b3156e15350 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1236,13 +1236,12 @@ void nfs_end_data_update(struct inode *inode) struct nfs_inode *nfsi = NFS_I(inode); if (!nfs_have_delegation(inode, FMODE_READ)) { - /* Mark the attribute cache for revalidation */ - spin_lock(&inode->i_lock); - nfsi->cache_validity |= NFS_INO_INVALID_ATTR; - /* Directories and symlinks: invalidate page cache too */ - if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) + /* Directories and symlinks: invalidate page cache */ + if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) { + spin_lock(&inode->i_lock); nfsi->cache_validity |= NFS_INO_INVALID_DATA; - spin_unlock(&inode->i_lock); + spin_unlock(&inode->i_lock); + } } nfsi->cache_change_attribute = jiffies; atomic_dec(&nfsi->data_updates); @@ -1360,6 +1359,33 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr) return status; } +/** + * nfs_post_op_update_inode - try to update the inode attribute cache + * @inode - pointer to inode + * @fattr - updated attributes + * + * After an operation that has changed the inode metadata, mark the + * attribute cache as being invalid, then try to update it. + */ +int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr) +{ + struct nfs_inode *nfsi = NFS_I(inode); + int status = 0; + + spin_lock(&inode->i_lock); + if (unlikely((fattr->valid & NFS_ATTR_FATTR) == 0)) { + nfsi->cache_validity |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS; + goto out; + } + status = nfs_update_inode(inode, fattr, fattr->time_start); + if (time_after_eq(fattr->time_start, nfsi->cache_change_attribute)) + nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME|NFS_INO_REVAL_PAGECACHE); + nfsi->cache_change_attribute = jiffies; +out: + spin_unlock(&inode->i_lock); + return status; +} + /* * Many nfs protocol calls return the new file attributes after * an operation. Here we update the inode to reflect the state diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index 4b1b48b139f6..92c870d19ccd 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -266,7 +266,7 @@ static int nfs3_proc_write(struct nfs_write_data *wdata) nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, rpcflags); if (status >= 0) - nfs_refresh_inode(inode, fattr); + nfs_post_op_update_inode(inode, fattr); dprintk("NFS reply write: %d\n", status); return status < 0? status : wdata->res.count; } @@ -288,7 +288,7 @@ static int nfs3_proc_commit(struct nfs_write_data *cdata) nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0); if (status >= 0) - nfs_refresh_inode(inode, fattr); + nfs_post_op_update_inode(inode, fattr); dprintk("NFS reply commit: %d\n", status); return status; } @@ -332,7 +332,7 @@ nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, nfs_fattr_init(&dir_attr); nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_CREATE, &arg, &res, 0); - nfs_refresh_inode(dir, &dir_attr); + nfs_post_op_update_inode(dir, &dir_attr); /* If the server doesn't support the exclusive creation semantics, * try again with simple 'guarded' mode. */ @@ -403,7 +403,7 @@ nfs3_proc_remove(struct inode *dir, struct qstr *name) dprintk("NFS call remove %s\n", name->name); nfs_fattr_init(&dir_attr); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); - nfs_refresh_inode(dir, &dir_attr); + nfs_post_op_update_inode(dir, &dir_attr); dprintk("NFS reply remove: %d\n", status); return status; } @@ -439,7 +439,7 @@ nfs3_proc_unlink_done(struct dentry *dir, struct rpc_task *task) return 1; if (msg->rpc_argp) { dir_attr = (struct nfs_fattr*)msg->rpc_resp; - nfs_refresh_inode(dir->d_inode, dir_attr); + nfs_post_op_update_inode(dir->d_inode, dir_attr); kfree(msg->rpc_argp); } return 0; @@ -468,8 +468,8 @@ nfs3_proc_rename(struct inode *old_dir, struct qstr *old_name, nfs_fattr_init(&old_dir_attr); nfs_fattr_init(&new_dir_attr); status = rpc_call(NFS_CLIENT(old_dir), NFS3PROC_RENAME, &arg, &res, 0); - nfs_refresh_inode(old_dir, &old_dir_attr); - nfs_refresh_inode(new_dir, &new_dir_attr); + nfs_post_op_update_inode(old_dir, &old_dir_attr); + nfs_post_op_update_inode(new_dir, &new_dir_attr); dprintk("NFS reply rename: %d\n", status); return status; } @@ -494,8 +494,8 @@ nfs3_proc_link(struct inode *inode, struct inode *dir, struct qstr *name) nfs_fattr_init(&dir_attr); nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(inode), NFS3PROC_LINK, &arg, &res, 0); - nfs_refresh_inode(dir, &dir_attr); - nfs_refresh_inode(inode, &fattr); + nfs_post_op_update_inode(dir, &dir_attr); + nfs_post_op_update_inode(inode, &fattr); dprintk("NFS reply link: %d\n", status); return status; } @@ -527,7 +527,7 @@ nfs3_proc_symlink(struct inode *dir, struct qstr *name, struct qstr *path, nfs_fattr_init(&dir_attr); nfs_fattr_init(fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_SYMLINK, &arg, &res, 0); - nfs_refresh_inode(dir, &dir_attr); + nfs_post_op_update_inode(dir, &dir_attr); dprintk("NFS reply symlink: %d\n", status); return status; } @@ -558,7 +558,7 @@ nfs3_proc_mkdir(struct inode *dir, struct dentry *dentry, struct iattr *sattr) nfs_fattr_init(&dir_attr); nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_MKDIR, &arg, &res, 0); - nfs_refresh_inode(dir, &dir_attr); + nfs_post_op_update_inode(dir, &dir_attr); if (status != 0) goto out; status = nfs_instantiate(dentry, &fhandle, &fattr); @@ -584,7 +584,7 @@ nfs3_proc_rmdir(struct inode *dir, struct qstr *name) dprintk("NFS call rmdir %s\n", name->name); nfs_fattr_init(&dir_attr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_RMDIR, &arg, &dir_attr, 0); - nfs_refresh_inode(dir, &dir_attr); + nfs_post_op_update_inode(dir, &dir_attr); dprintk("NFS reply rmdir: %d\n", status); return status; } @@ -679,7 +679,7 @@ nfs3_proc_mknod(struct inode *dir, struct dentry *dentry, struct iattr *sattr, nfs_fattr_init(&dir_attr); nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFS3PROC_MKNOD, &arg, &res, 0); - nfs_refresh_inode(dir, &dir_attr); + nfs_post_op_update_inode(dir, &dir_attr); if (status != 0) goto out; status = nfs_instantiate(dentry, &fh, &fattr); @@ -775,7 +775,7 @@ nfs3_write_done(struct rpc_task *task) return; data = (struct nfs_write_data *)task->tk_calldata; if (task->tk_status >= 0) - nfs_refresh_inode(data->inode, data->res.fattr); + nfs_post_op_update_inode(data->inode, data->res.fattr); nfs_writeback_done(task); } @@ -819,7 +819,7 @@ nfs3_commit_done(struct rpc_task *task) return; data = (struct nfs_write_data *)task->tk_calldata; if (task->tk_status >= 0) - nfs_refresh_inode(data->inode, data->res.fattr); + nfs_post_op_update_inode(data->inode, data->res.fattr); nfs_commit_done(task); } diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 2a759e8e387c..3274f2d354f3 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -187,8 +187,11 @@ static void update_changeattr(struct inode *inode, struct nfs4_change_info *cinf { struct nfs_inode *nfsi = NFS_I(inode); + spin_lock(&inode->i_lock); + nfsi->cache_validity |= NFS_INO_INVALID_ATTR; if (cinfo->before == nfsi->change_attr && cinfo->atomic) nfsi->change_attr = cinfo->after; + spin_unlock(&inode->i_lock); } /* Helper for asynchronous RPC calls */ diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c index 5ef28f08f424..a48a003242c0 100644 --- a/fs/nfs/proc.c +++ b/fs/nfs/proc.c @@ -206,7 +206,7 @@ static int nfs_proc_write(struct nfs_write_data *wdata) nfs_fattr_init(fattr); status = rpc_call_sync(NFS_CLIENT(inode), &msg, flags); if (status >= 0) { - nfs_refresh_inode(inode, fattr); + nfs_post_op_update_inode(inode, fattr); wdata->res.count = wdata->args.count; wdata->verf.committed = NFS_FILE_SYNC; } @@ -275,6 +275,7 @@ nfs_proc_mknod(struct inode *dir, struct dentry *dentry, struct iattr *sattr, nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFSPROC_CREATE, &arg, &res, 0); + nfs_mark_for_revalidate(dir); if (status == -EINVAL && S_ISFIFO(mode)) { sattr->ia_mode = mode; @@ -305,6 +306,7 @@ nfs_proc_remove(struct inode *dir, struct qstr *name) dprintk("NFS call remove %s\n", name->name); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); + nfs_mark_for_revalidate(dir); dprintk("NFS reply remove: %d\n", status); return status; @@ -331,8 +333,10 @@ nfs_proc_unlink_done(struct dentry *dir, struct rpc_task *task) { struct rpc_message *msg = &task->tk_msg; - if (msg->rpc_argp) + if (msg->rpc_argp) { + nfs_mark_for_revalidate(dir->d_inode); kfree(msg->rpc_argp); + } return 0; } @@ -352,6 +356,8 @@ nfs_proc_rename(struct inode *old_dir, struct qstr *old_name, dprintk("NFS call rename %s -> %s\n", old_name->name, new_name->name); status = rpc_call(NFS_CLIENT(old_dir), NFSPROC_RENAME, &arg, NULL, 0); + nfs_mark_for_revalidate(old_dir); + nfs_mark_for_revalidate(new_dir); dprintk("NFS reply rename: %d\n", status); return status; } @@ -369,6 +375,7 @@ nfs_proc_link(struct inode *inode, struct inode *dir, struct qstr *name) dprintk("NFS call link %s\n", name->name); status = rpc_call(NFS_CLIENT(inode), NFSPROC_LINK, &arg, NULL, 0); + nfs_mark_for_revalidate(dir); dprintk("NFS reply link: %d\n", status); return status; } @@ -394,6 +401,7 @@ nfs_proc_symlink(struct inode *dir, struct qstr *name, struct qstr *path, nfs_fattr_init(fattr); fhandle->size = 0; status = rpc_call(NFS_CLIENT(dir), NFSPROC_SYMLINK, &arg, NULL, 0); + nfs_mark_for_revalidate(dir); dprintk("NFS reply symlink: %d\n", status); return status; } @@ -418,6 +426,7 @@ nfs_proc_mkdir(struct inode *dir, struct dentry *dentry, struct iattr *sattr) dprintk("NFS call mkdir %s\n", dentry->d_name.name); nfs_fattr_init(&fattr); status = rpc_call(NFS_CLIENT(dir), NFSPROC_MKDIR, &arg, &res, 0); + nfs_mark_for_revalidate(dir); if (status == 0) status = nfs_instantiate(dentry, &fhandle, &fattr); dprintk("NFS reply mkdir: %d\n", status); @@ -436,6 +445,7 @@ nfs_proc_rmdir(struct inode *dir, struct qstr *name) dprintk("NFS call rmdir %s\n", name->name); status = rpc_call(NFS_CLIENT(dir), NFSPROC_RMDIR, &arg, NULL, 0); + nfs_mark_for_revalidate(dir); dprintk("NFS reply rmdir: %d\n", status); return status; } @@ -579,7 +589,7 @@ nfs_write_done(struct rpc_task *task) struct nfs_write_data *data = (struct nfs_write_data *) task->tk_calldata; if (task->tk_status >= 0) - nfs_refresh_inode(data->inode, data->res.fattr); + nfs_post_op_update_inode(data->inode, data->res.fattr); nfs_writeback_done(task); } diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index faeaad666ca8..325fe7ae49bb 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -241,13 +241,17 @@ static inline int nfs_caches_unstable(struct inode *inode) return atomic_read(&NFS_I(inode)->data_updates) != 0; } +static inline void nfs_mark_for_revalidate(struct inode *inode) +{ + spin_lock(&inode->i_lock); + NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS; + spin_unlock(&inode->i_lock); +} + static inline void NFS_CACHEINV(struct inode *inode) { - if (!nfs_caches_unstable(inode)) { - spin_lock(&inode->i_lock); - NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS; - spin_unlock(&inode->i_lock); - } + if (!nfs_caches_unstable(inode)) + nfs_mark_for_revalidate(inode); } static inline int nfs_server_capable(struct inode *inode, int cap) @@ -291,6 +295,7 @@ extern void nfs_zap_caches(struct inode *); extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *, struct nfs_fattr *); extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *); +extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr); extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *); extern int nfs_permission(struct inode *, int, struct nameidata *); extern int nfs_access_get_cached(struct inode *, struct rpc_cred *, struct nfs_access_entry *); -- GitLab From 0c70b50150cfb0b43ff500a8a394a52b4d5f1350 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 25 Oct 2005 11:48:36 -0400 Subject: [PATCH 0438/1519] NFS: nfs_lookup doesn't need to revalidate the parent directory's inode nfs_lookup() used to consult a lookup cache before trying an actual wire lookup operation. The lookup cache would be invalid, of course, if the parent directory's mtime had changed, so nfs_lookup performed an inode revalidation on the parent. Since nfs_lookup() doesn't use a cache anymore, the revalidation is no longer necessary. There are cases where it will generate a lot of unnecessary GETATTR traffic. See http://bugzilla.linux-nfs.org/show_bug.cgi?id=9 Test-plan: Use lndir and "rm -rf" and watch for excess GETATTR traffic or application level errors. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index b8a73045e9a0..ce8f77dadff9 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -853,12 +853,6 @@ static struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, stru dentry->d_op = NFS_PROTO(dir)->dentry_ops; lock_kernel(); - /* Revalidate parent directory attribute cache */ - error = nfs_revalidate_inode(NFS_SERVER(dir), dir); - if (error < 0) { - res = ERR_PTR(error); - goto out_unlock; - } /* If we're doing an exclusive create, optimize away the lookup */ if (nfs_is_exclusive_create(dir, nd)) -- GitLab From 56ae19f38f10aad4f27f7e12138a29b295dff07a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:40 -0400 Subject: [PATCH 0439/1519] NFSv4: Add directory post-op attributes to the CREATE operations. Since the directory attributes change every time we CREATE a file, we might as well pick up the new directory attributes in the same compound. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 28 ++++++++++++++--- fs/nfs/nfs4xdr.c | 69 +++++++++++++++++++++++++++++++++++------ include/linux/nfs_xdr.h | 2 ++ 3 files changed, 84 insertions(+), 15 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 3274f2d354f3..f363fd6c7f4d 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -443,7 +443,11 @@ static int _nfs4_proc_open(struct inode *dir, struct nfs4_state_owner *sp, stru nfs_increment_open_seqid(status, o_arg->seqid); if (status != 0) goto out; - update_changeattr(dir, &o_res->cinfo); + if (o_arg->open_flags & O_CREAT) { + update_changeattr(dir, &o_res->cinfo); + nfs_post_op_update_inode(dir, o_res->dir_attr); + } else + nfs_refresh_inode(dir, o_res->dir_attr); if(o_res->rflags & NFS4_OPEN_RESULT_CONFIRM) { status = _nfs4_proc_open_confirm(server->client, &o_res->fh, sp, &o_res->stateid, o_arg->seqid); @@ -497,7 +501,7 @@ static int _nfs4_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st struct inode *inode = state->inode; struct nfs_server *server = NFS_SERVER(dir); struct nfs_delegation *delegation = NFS_I(inode)->delegation; - struct nfs_fattr f_attr; + struct nfs_fattr f_attr, dir_attr; struct nfs_openargs o_arg = { .fh = NFS_FH(dir), .open_flags = state->state, @@ -507,6 +511,7 @@ static int _nfs4_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st }; struct nfs_openres o_res = { .f_attr = &f_attr, + .dir_attr = &dir_attr, .server = server, }; int status = 0; @@ -524,6 +529,7 @@ static int _nfs4_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st if (o_arg.seqid == NULL) goto out; nfs_fattr_init(&f_attr); + nfs_fattr_init(&dir_attr); status = _nfs4_proc_open(dir, sp, &o_arg, &o_res); if (status != 0) goto out_nodeleg; @@ -694,7 +700,7 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st struct nfs4_client *clp = server->nfs4_state; struct inode *inode = NULL; int status; - struct nfs_fattr f_attr; + struct nfs_fattr f_attr, dir_attr; struct nfs_openargs o_arg = { .fh = NFS_FH(dir), .open_flags = flags, @@ -705,6 +711,7 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st }; struct nfs_openres o_res = { .f_attr = &f_attr, + .dir_attr = &dir_attr, .server = server, }; @@ -727,6 +734,7 @@ static int _nfs4_do_open(struct inode *dir, struct dentry *dentry, int flags, st if (o_arg.seqid == NULL) return -ENOMEM; nfs_fattr_init(&f_attr); + nfs_fattr_init(&dir_attr); status = _nfs4_proc_open(dir, sp, &o_arg, &o_res); if (status != 0) goto out_err; @@ -1746,6 +1754,7 @@ static int _nfs4_proc_symlink(struct inode *dir, struct qstr *name, struct nfs_fattr *fattr) { struct nfs_server *server = NFS_SERVER(dir); + struct nfs_fattr dir_fattr; struct nfs4_create_arg arg = { .dir_fh = NFS_FH(dir), .server = server, @@ -1758,6 +1767,7 @@ static int _nfs4_proc_symlink(struct inode *dir, struct qstr *name, .server = server, .fh = fhandle, .fattr = fattr, + .dir_fattr = &dir_fattr, }; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_SYMLINK], @@ -1770,10 +1780,12 @@ static int _nfs4_proc_symlink(struct inode *dir, struct qstr *name, return -ENAMETOOLONG; arg.u.symlink = path; nfs_fattr_init(fattr); + nfs_fattr_init(&dir_fattr); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); if (!status) update_changeattr(dir, &res.dir_cinfo); + nfs_post_op_update_inode(dir, res.dir_fattr); return status; } @@ -1797,7 +1809,7 @@ static int _nfs4_proc_mkdir(struct inode *dir, struct dentry *dentry, { struct nfs_server *server = NFS_SERVER(dir); struct nfs_fh fhandle; - struct nfs_fattr fattr; + struct nfs_fattr fattr, dir_fattr; struct nfs4_create_arg arg = { .dir_fh = NFS_FH(dir), .server = server, @@ -1810,6 +1822,7 @@ static int _nfs4_proc_mkdir(struct inode *dir, struct dentry *dentry, .server = server, .fh = &fhandle, .fattr = &fattr, + .dir_fattr = &dir_fattr, }; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_CREATE], @@ -1819,10 +1832,12 @@ static int _nfs4_proc_mkdir(struct inode *dir, struct dentry *dentry, int status; nfs_fattr_init(&fattr); + nfs_fattr_init(&dir_fattr); status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); if (!status) { update_changeattr(dir, &res.dir_cinfo); + nfs_post_op_update_inode(dir, res.dir_fattr); status = nfs_instantiate(dentry, &fhandle, &fattr); } return status; @@ -1895,7 +1910,7 @@ static int _nfs4_proc_mknod(struct inode *dir, struct dentry *dentry, { struct nfs_server *server = NFS_SERVER(dir); struct nfs_fh fh; - struct nfs_fattr fattr; + struct nfs_fattr fattr, dir_fattr; struct nfs4_create_arg arg = { .dir_fh = NFS_FH(dir), .server = server, @@ -1907,6 +1922,7 @@ static int _nfs4_proc_mknod(struct inode *dir, struct dentry *dentry, .server = server, .fh = &fh, .fattr = &fattr, + .dir_fattr = &dir_fattr, }; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_CREATE], @@ -1917,6 +1933,7 @@ static int _nfs4_proc_mknod(struct inode *dir, struct dentry *dentry, int mode = sattr->ia_mode; nfs_fattr_init(&fattr); + nfs_fattr_init(&dir_fattr); BUG_ON(!(sattr->ia_valid & ATTR_MODE)); BUG_ON(!S_ISFIFO(mode) && !S_ISBLK(mode) && !S_ISCHR(mode) && !S_ISSOCK(mode)); @@ -1938,6 +1955,7 @@ static int _nfs4_proc_mknod(struct inode *dir, struct dentry *dentry, status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); if (status == 0) { update_changeattr(dir, &res.dir_cinfo); + nfs_post_op_update_inode(dir, res.dir_fattr); status = nfs_instantiate(dentry, &fh, &fattr); } return status; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 8b21de8a06fa..7f91d613d31a 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -95,6 +95,8 @@ static int nfs_stat_to_errno(int); #define decode_getattr_maxsz (op_decode_hdr_maxsz + nfs4_fattr_maxsz) #define encode_savefh_maxsz (op_encode_hdr_maxsz) #define decode_savefh_maxsz (op_decode_hdr_maxsz) +#define encode_restorefh_maxsz (op_encode_hdr_maxsz) +#define decode_restorefh_maxsz (op_decode_hdr_maxsz) #define encode_fsinfo_maxsz (op_encode_hdr_maxsz + 2) #define decode_fsinfo_maxsz (op_decode_hdr_maxsz + 11) #define encode_renew_maxsz (op_encode_hdr_maxsz + 3) @@ -336,14 +338,20 @@ static int nfs_stat_to_errno(int); decode_getfh_maxsz) #define NFS4_enc_create_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ + encode_savefh_maxsz + \ encode_create_maxsz + \ + encode_getfh_maxsz + \ encode_getattr_maxsz + \ - encode_getfh_maxsz) + encode_restorefh_maxsz + \ + encode_getattr_maxsz) #define NFS4_dec_create_sz (compound_decode_hdr_maxsz + \ decode_putfh_maxsz + \ + decode_savefh_maxsz + \ decode_create_maxsz + \ + decode_getfh_maxsz + \ decode_getattr_maxsz + \ - decode_getfh_maxsz) + decode_restorefh_maxsz + \ + decode_getattr_maxsz) #define NFS4_enc_pathconf_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ encode_getattr_maxsz) @@ -1112,6 +1120,17 @@ static int encode_renew(struct xdr_stream *xdr, const struct nfs4_client *client return 0; } +static int +encode_restorefh(struct xdr_stream *xdr) +{ + uint32_t *p; + + RESERVE_SPACE(4); + WRITE32(OP_RESTOREFH); + + return 0; +} + static int encode_setacl(struct xdr_stream *xdr, struct nfs_setaclargs *arg) { @@ -1358,7 +1377,7 @@ static int nfs4_xdr_enc_create(struct rpc_rqst *req, uint32_t *p, const struct n { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 4, + .nops = 7, }; int status; @@ -1366,10 +1385,16 @@ static int nfs4_xdr_enc_create(struct rpc_rqst *req, uint32_t *p, const struct n encode_compound_hdr(&xdr, &hdr); if ((status = encode_putfh(&xdr, args->dir_fh)) != 0) goto out; + if ((status = encode_savefh(&xdr)) != 0) + goto out; if ((status = encode_create(&xdr, args)) != 0) goto out; if ((status = encode_getfh(&xdr)) != 0) goto out; + if ((status = encode_getfattr(&xdr, args->bitmask)) != 0) + goto out; + if ((status = encode_restorefh(&xdr)) != 0) + goto out; status = encode_getfattr(&xdr, args->bitmask); out: return status; @@ -1429,7 +1454,7 @@ static int nfs4_xdr_enc_open(struct rpc_rqst *req, uint32_t *p, struct nfs_opena { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 4, + .nops = 7, }; int status; @@ -1439,6 +1464,9 @@ static int nfs4_xdr_enc_open(struct rpc_rqst *req, uint32_t *p, struct nfs_opena xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); status = encode_putfh(&xdr, args->fh); + if (status) + goto out; + status = encode_savefh(&xdr); if (status) goto out; status = encode_open(&xdr, args); @@ -1448,6 +1476,12 @@ static int nfs4_xdr_enc_open(struct rpc_rqst *req, uint32_t *p, struct nfs_opena if (status) goto out; status = encode_getfattr(&xdr, args->bitmask); + if (status) + goto out; + status = encode_restorefh(&xdr); + if (status) + goto out; + status = encode_getfattr(&xdr, args->bitmask); out: return status; } @@ -3218,6 +3252,12 @@ static int decode_renew(struct xdr_stream *xdr) return decode_op_hdr(xdr, OP_RENEW); } +static int +decode_restorefh(struct xdr_stream *xdr) +{ + return decode_op_hdr(xdr, OP_RESTOREFH); +} + static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, size_t *acl_len) { @@ -3510,13 +3550,17 @@ static int nfs4_xdr_dec_create(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_ goto out; if ((status = decode_putfh(&xdr)) != 0) goto out; + if ((status = decode_savefh(&xdr)) != 0) + goto out; if ((status = decode_create(&xdr,&res->dir_cinfo)) != 0) goto out; if ((status = decode_getfh(&xdr, res->fh)) != 0) goto out; - status = decode_getfattr(&xdr, res->fattr, res->server); - if (status == NFS4ERR_DELAY) - status = 0; + if (decode_getfattr(&xdr, res->fattr, res->server) != 0) + goto out; + if ((status = decode_restorefh(&xdr)) != 0) + goto out; + decode_getfattr(&xdr, res->dir_fattr, res->server); out: return status; } @@ -3654,15 +3698,20 @@ static int nfs4_xdr_dec_open(struct rpc_rqst *rqstp, uint32_t *p, struct nfs_ope status = decode_putfh(&xdr); if (status) goto out; + status = decode_savefh(&xdr); + if (status) + goto out; status = decode_open(&xdr, res); if (status) goto out; status = decode_getfh(&xdr, &res->fh); if (status) goto out; - status = decode_getfattr(&xdr, res->f_attr, res->server); - if (status == NFS4ERR_DELAY) - status = 0; + if (decode_getfattr(&xdr, res->f_attr, res->server) != 0) + goto out; + if ((status = decode_restorefh(&xdr)) != 0) + goto out; + decode_getfattr(&xdr, res->dir_attr, res->server); out: return status; } diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index aeaee7e7c51d..6485b8b41b83 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -124,6 +124,7 @@ struct nfs_openres { struct nfs4_change_info cinfo; __u32 rflags; struct nfs_fattr * f_attr; + struct nfs_fattr * dir_attr; const struct nfs_server *server; int delegation_type; nfs4_stateid delegation; @@ -540,6 +541,7 @@ struct nfs4_create_res { struct nfs_fh * fh; struct nfs_fattr * fattr; struct nfs4_change_info dir_cinfo; + struct nfs_fattr * dir_fattr; }; struct nfs4_fsinfo_arg { -- GitLab From 3338c143b4fde2d256016b63043ec8e2c93eba19 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:41 -0400 Subject: [PATCH 0440/1519] NFS: Optimise attribute revalidation on close(). Only force a getattr in nfs_file_flush() if the attribute cache is stale. Signed-off-by: Trond Myklebust --- fs/nfs/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 572d8593486f..57d3e77d97ee 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -205,8 +205,8 @@ nfs_file_flush(struct file *file) if (!status) { status = ctx->error; ctx->error = 0; - if (!status && !nfs_have_delegation(inode, FMODE_READ)) - __nfs_revalidate_inode(NFS_SERVER(inode), inode); + if (!status) + nfs_revalidate_inode(NFS_SERVER(inode), inode); } unlock_kernel(); return status; -- GitLab From 516a6af641bb50c608329a5bd751acd0d65cc4ab Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:41 -0400 Subject: [PATCH 0441/1519] NFS: Add optional post-op getattr instruction to the NFSv4 file close. "Optional" means that the close call will not fail if the getattr at the end of the compound fails. If it does succeed, try to refresh inode attributes. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 9 ++++++++- fs/nfs/nfs4xdr.c | 34 ++++++++++++++++++++++++++++------ include/linux/nfs_xdr.h | 3 +++ 3 files changed, 39 insertions(+), 7 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f363fd6c7f4d..7be3d2d15d6f 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -865,6 +865,7 @@ struct nfs4_closedata { struct nfs4_state *state; struct nfs_closeargs arg; struct nfs_closeres res; + struct nfs_fattr fattr; }; static void nfs4_free_closedata(struct nfs4_closedata *calldata) @@ -904,6 +905,7 @@ static void nfs4_close_done(struct rpc_task *task) return; } } + nfs_refresh_inode(calldata->inode, calldata->res.fattr); state->state = calldata->arg.open_flags; nfs4_free_closedata(calldata); } @@ -941,6 +943,7 @@ static void nfs4_close_begin(struct rpc_task *task) rpc_exit(task, 0); return; } + nfs_fattr_init(calldata->res.fattr); if (mode != 0) msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_OPEN_DOWNGRADE]; calldata->arg.open_flags = mode; @@ -960,6 +963,7 @@ static void nfs4_close_begin(struct rpc_task *task) */ int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode) { + struct nfs_server *server = NFS_SERVER(inode); struct nfs4_closedata *calldata; int status = -ENOMEM; @@ -974,8 +978,11 @@ int nfs4_do_close(struct inode *inode, struct nfs4_state *state, mode_t mode) calldata->arg.seqid = nfs_alloc_seqid(&state->owner->so_seqid); if (calldata->arg.seqid == NULL) goto out_free_calldata; + calldata->arg.bitmask = server->attr_bitmask; + calldata->res.fattr = &calldata->fattr; + calldata->res.server = server; - status = nfs4_call_async(NFS_SERVER(inode)->client, nfs4_close_begin, + status = nfs4_call_async(server->client, nfs4_close_begin, nfs4_close_done, calldata); if (status == 0) goto out; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 7f91d613d31a..cd9e26cfa868 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -198,17 +198,21 @@ static int nfs_stat_to_errno(int); #define NFS4_enc_open_downgrade_sz \ (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ - op_encode_hdr_maxsz + 7) + op_encode_hdr_maxsz + 7 + \ + encode_getattr_maxsz) #define NFS4_dec_open_downgrade_sz \ (compound_decode_hdr_maxsz + \ decode_putfh_maxsz + \ - op_decode_hdr_maxsz + 4) + op_decode_hdr_maxsz + 4 + \ + decode_getattr_maxsz) #define NFS4_enc_close_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ - op_encode_hdr_maxsz + 5) + op_encode_hdr_maxsz + 5 + \ + encode_getattr_maxsz) #define NFS4_dec_close_sz (compound_decode_hdr_maxsz + \ decode_putfh_maxsz + \ - op_decode_hdr_maxsz + 4) + op_decode_hdr_maxsz + 4 + \ + decode_getattr_maxsz) #define NFS4_enc_setattr_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ op_encode_hdr_maxsz + 4 + \ @@ -1433,7 +1437,7 @@ static int nfs4_xdr_enc_close(struct rpc_rqst *req, uint32_t *p, struct nfs_clos { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 2, + .nops = 3, }; int status; @@ -1443,6 +1447,9 @@ static int nfs4_xdr_enc_close(struct rpc_rqst *req, uint32_t *p, struct nfs_clos if(status) goto out; status = encode_close(&xdr, args); + if (status != 0) + goto out; + status = encode_getfattr(&xdr, args->bitmask); out: return status; } @@ -1541,7 +1548,7 @@ static int nfs4_xdr_enc_open_downgrade(struct rpc_rqst *req, uint32_t *p, struct { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 2, + .nops = 3, }; int status; @@ -1551,6 +1558,9 @@ static int nfs4_xdr_enc_open_downgrade(struct rpc_rqst *req, uint32_t *p, struct if (status) goto out; status = encode_open_downgrade(&xdr, args); + if (status != 0) + goto out; + status = encode_getfattr(&xdr, args->bitmask); out: return status; } @@ -3403,6 +3413,9 @@ static int nfs4_xdr_dec_open_downgrade(struct rpc_rqst *rqstp, uint32_t *p, stru if (status) goto out; status = decode_open_downgrade(&xdr, res); + if (status != 0) + goto out; + decode_getfattr(&xdr, res->fattr, res->server); out: return status; } @@ -3678,6 +3691,15 @@ static int nfs4_xdr_dec_close(struct rpc_rqst *rqstp, uint32_t *p, struct nfs_cl if (status) goto out; status = decode_close(&xdr, res); + if (status != 0) + goto out; + /* + * Note: Server may do delete on close for this file + * in which case the getattr call will fail with + * an ESTALE error. Shouldn't be a problem, + * though, since fattr->valid will remain unset. + */ + decode_getfattr(&xdr, res->fattr, res->server); out: return status; } diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 6485b8b41b83..4f03dc21cf4a 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -153,10 +153,13 @@ struct nfs_closeargs { nfs4_stateid * stateid; struct nfs_seqid * seqid; int open_flags; + const u32 * bitmask; }; struct nfs_closeres { nfs4_stateid stateid; + struct nfs_fattr * fattr; + const struct nfs_server *server; }; /* * * Arguments to the lock,lockt, and locku call. -- GitLab From cf809556149f076b7a020c10e066b2b96e79b6a1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:42 -0400 Subject: [PATCH 0442/1519] NFS: Ensure that nfs_link() instantiates the dentry correctly Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index ce8f77dadff9..8272ed3fc707 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1432,17 +1432,14 @@ nfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry) old_dentry->d_parent->d_name.name, old_dentry->d_name.name, dentry->d_parent->d_name.name, dentry->d_name.name); - /* - * Drop the dentry in advance to force a new lookup. - * Since nfs_proc_link doesn't return a file handle, - * we can't use the existing dentry. - */ lock_kernel(); - d_drop(dentry); - nfs_begin_data_update(dir); nfs_begin_data_update(inode); error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name); + if (error == 0) { + atomic_inc(&inode->i_count); + d_instantiate(dentry, inode); + } nfs_end_data_update(inode); nfs_end_data_update(dir); unlock_kernel(); -- GitLab From 91ba2eeec5e8e86e054937eb3bf5aec5b22b1830 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:42 -0400 Subject: [PATCH 0443/1519] NFSv4: Add post-op attributes to nfs4_proc_link() Optimise attribute revalidation when hardlinking. Add post-op attributes for the directory and the original inode. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 22 +++++++++++++++++----- fs/nfs/nfs4xdr.c | 34 ++++++++++++++++++++++++++++------ include/linux/nfs_xdr.h | 9 +++++++++ 3 files changed, 54 insertions(+), 11 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 7be3d2d15d6f..04995e39e867 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1724,22 +1724,34 @@ static int nfs4_proc_rename(struct inode *old_dir, struct qstr *old_name, static int _nfs4_proc_link(struct inode *inode, struct inode *dir, struct qstr *name) { + struct nfs_server *server = NFS_SERVER(inode); struct nfs4_link_arg arg = { .fh = NFS_FH(inode), .dir_fh = NFS_FH(dir), .name = name, + .bitmask = server->attr_bitmask, + }; + struct nfs_fattr fattr, dir_attr; + struct nfs4_link_res res = { + .server = server, + .fattr = &fattr, + .dir_attr = &dir_attr, }; - struct nfs4_change_info cinfo = { }; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LINK], .rpc_argp = &arg, - .rpc_resp = &cinfo, + .rpc_resp = &res, }; int status; - status = rpc_call_sync(NFS_CLIENT(inode), &msg, 0); - if (!status) - update_changeattr(dir, &cinfo); + nfs_fattr_init(res.fattr); + nfs_fattr_init(res.dir_attr); + status = rpc_call_sync(server->client, &msg, 0); + if (!status) { + update_changeattr(dir, &res.cinfo); + nfs_post_op_update_inode(dir, res.dir_attr); + nfs_refresh_inode(inode, res.fattr); + } return status; } diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index cd9e26cfa868..f624b693ce21 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -324,12 +324,18 @@ static int nfs_stat_to_errno(int); encode_putfh_maxsz + \ encode_savefh_maxsz + \ encode_putfh_maxsz + \ - encode_link_maxsz) + encode_link_maxsz + \ + decode_getattr_maxsz + \ + encode_restorefh_maxsz + \ + decode_getattr_maxsz) #define NFS4_dec_link_sz (compound_decode_hdr_maxsz + \ decode_putfh_maxsz + \ decode_savefh_maxsz + \ decode_putfh_maxsz + \ - decode_link_maxsz) + decode_link_maxsz + \ + decode_getattr_maxsz + \ + decode_restorefh_maxsz + \ + decode_getattr_maxsz) #define NFS4_enc_symlink_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ encode_symlink_maxsz + \ @@ -1357,7 +1363,7 @@ static int nfs4_xdr_enc_link(struct rpc_rqst *req, uint32_t *p, const struct nfs { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 4, + .nops = 7, }; int status; @@ -1369,7 +1375,13 @@ static int nfs4_xdr_enc_link(struct rpc_rqst *req, uint32_t *p, const struct nfs goto out; if ((status = encode_putfh(&xdr, args->dir_fh)) != 0) goto out; - status = encode_link(&xdr, args->name); + if ((status = encode_link(&xdr, args->name)) != 0) + goto out; + if ((status = encode_getfattr(&xdr, args->bitmask)) != 0) + goto out; + if ((status = encode_restorefh(&xdr)) != 0) + goto out; + status = encode_getfattr(&xdr, args->bitmask); out: return status; } @@ -3529,7 +3541,7 @@ static int nfs4_xdr_dec_rename(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_ /* * Decode LINK response */ -static int nfs4_xdr_dec_link(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_change_info *cinfo) +static int nfs4_xdr_dec_link(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_link_res *res) { struct xdr_stream xdr; struct compound_hdr hdr; @@ -3544,7 +3556,17 @@ static int nfs4_xdr_dec_link(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_ch goto out; if ((status = decode_putfh(&xdr)) != 0) goto out; - status = decode_link(&xdr, cinfo); + if ((status = decode_link(&xdr, &res->cinfo)) != 0) + goto out; + /* + * Note order: OP_LINK leaves the directory as the current + * filehandle. + */ + if (decode_getfattr(&xdr, res->dir_attr, res->server) != 0) + goto out; + if ((status = decode_restorefh(&xdr)) != 0) + goto out; + decode_getfattr(&xdr, res->fattr, res->server); out: return status; } diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 4f03dc21cf4a..89238b799cfd 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -566,8 +566,17 @@ struct nfs4_link_arg { const struct nfs_fh * fh; const struct nfs_fh * dir_fh; const struct qstr * name; + const u32 * bitmask; +}; + +struct nfs4_link_res { + const struct nfs_server * server; + struct nfs_fattr * fattr; + struct nfs4_change_info cinfo; + struct nfs_fattr * dir_attr; }; + struct nfs4_lookup_arg { const struct nfs_fh * dir_fh; const struct qstr * name; -- GitLab From 6caf2c8276d371679a798058e8fdf49f5ff831a3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:43 -0400 Subject: [PATCH 0444/1519] NFSv4: Add post-op attributes to nfs4_proc_rename() Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 15 +++++++++++++-- fs/nfs/nfs4xdr.c | 29 ++++++++++++++++++++++++----- include/linux/nfs_xdr.h | 4 ++++ 3 files changed, 41 insertions(+), 7 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 04995e39e867..f96bc12c0fa0 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1685,13 +1685,20 @@ static int nfs4_proc_unlink_done(struct dentry *dir, struct rpc_task *task) static int _nfs4_proc_rename(struct inode *old_dir, struct qstr *old_name, struct inode *new_dir, struct qstr *new_name) { + struct nfs_server *server = NFS_SERVER(old_dir); struct nfs4_rename_arg arg = { .old_dir = NFS_FH(old_dir), .new_dir = NFS_FH(new_dir), .old_name = old_name, .new_name = new_name, + .bitmask = server->attr_bitmask, + }; + struct nfs_fattr old_fattr, new_fattr; + struct nfs4_rename_res res = { + .server = server, + .old_fattr = &old_fattr, + .new_fattr = &new_fattr, }; - struct nfs4_rename_res res = { }; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENAME], .rpc_argp = &arg, @@ -1699,11 +1706,15 @@ static int _nfs4_proc_rename(struct inode *old_dir, struct qstr *old_name, }; int status; - status = rpc_call_sync(NFS_CLIENT(old_dir), &msg, 0); + nfs_fattr_init(res.old_fattr); + nfs_fattr_init(res.new_fattr); + status = rpc_call_sync(server->client, &msg, 0); if (!status) { update_changeattr(old_dir, &res.old_cinfo); + nfs_post_op_update_inode(old_dir, res.old_fattr); update_changeattr(new_dir, &res.new_cinfo); + nfs_post_op_update_inode(new_dir, res.new_fattr); } return status; } diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index f624b693ce21..2a07755bd347 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -314,12 +314,18 @@ static int nfs_stat_to_errno(int); encode_putfh_maxsz + \ encode_savefh_maxsz + \ encode_putfh_maxsz + \ - encode_rename_maxsz) + encode_rename_maxsz + \ + encode_getattr_maxsz + \ + encode_restorefh_maxsz + \ + encode_getattr_maxsz) #define NFS4_dec_rename_sz (compound_decode_hdr_maxsz + \ decode_putfh_maxsz + \ decode_savefh_maxsz + \ decode_putfh_maxsz + \ - decode_rename_maxsz) + decode_rename_maxsz + \ + decode_getattr_maxsz + \ + decode_restorefh_maxsz + \ + decode_getattr_maxsz) #define NFS4_enc_link_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ encode_savefh_maxsz + \ @@ -1339,7 +1345,7 @@ static int nfs4_xdr_enc_rename(struct rpc_rqst *req, uint32_t *p, const struct n { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 4, + .nops = 7, }; int status; @@ -1351,7 +1357,13 @@ static int nfs4_xdr_enc_rename(struct rpc_rqst *req, uint32_t *p, const struct n goto out; if ((status = encode_putfh(&xdr, args->new_dir)) != 0) goto out; - status = encode_rename(&xdr, args->old_name, args->new_name); + if ((status = encode_rename(&xdr, args->old_name, args->new_name)) != 0) + goto out; + if ((status = encode_getfattr(&xdr, args->bitmask)) != 0) + goto out; + if ((status = encode_restorefh(&xdr)) != 0) + goto out; + status = encode_getfattr(&xdr, args->bitmask); out: return status; } @@ -3533,7 +3545,14 @@ static int nfs4_xdr_dec_rename(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_ goto out; if ((status = decode_putfh(&xdr)) != 0) goto out; - status = decode_rename(&xdr, &res->old_cinfo, &res->new_cinfo); + if ((status = decode_rename(&xdr, &res->old_cinfo, &res->new_cinfo)) != 0) + goto out; + /* Current FH is target directory */ + if (decode_getfattr(&xdr, res->new_fattr, res->server) != 0) + goto out; + if ((status = decode_restorefh(&xdr)) != 0) + goto out; + decode_getfattr(&xdr, res->old_fattr, res->server); out: return status; } diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 89238b799cfd..6f0804280824 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -630,11 +630,15 @@ struct nfs4_rename_arg { const struct nfs_fh * new_dir; const struct qstr * old_name; const struct qstr * new_name; + const u32 * bitmask; }; struct nfs4_rename_res { + const struct nfs_server * server; struct nfs4_change_info old_cinfo; + struct nfs_fattr * old_fattr; struct nfs4_change_info new_cinfo; + struct nfs_fattr * new_fattr; }; struct nfs4_setclientid { -- GitLab From 16e429596dec4d28e16812b3a9be27f18412c567 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:44 -0400 Subject: [PATCH 0445/1519] NFSv4: Add post-op attributes to nfs4_proc_remove() Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 27 +++++++++++++++++++++------ fs/nfs/nfs4xdr.c | 25 +++++++++++++++++-------- include/linux/nfs_xdr.h | 7 +++++++ 3 files changed, 45 insertions(+), 14 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f96bc12c0fa0..bab47c4cb41c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1614,11 +1614,17 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr, static int _nfs4_proc_remove(struct inode *dir, struct qstr *name) { + struct nfs_server *server = NFS_SERVER(dir); struct nfs4_remove_arg args = { .fh = NFS_FH(dir), .name = name, + .bitmask = server->attr_bitmask, + }; + struct nfs_fattr dir_attr; + struct nfs4_remove_res res = { + .server = server, + .dir_attr = &dir_attr, }; - struct nfs4_change_info res; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_REMOVE], .rpc_argp = &args, @@ -1626,9 +1632,12 @@ static int _nfs4_proc_remove(struct inode *dir, struct qstr *name) }; int status; - status = rpc_call_sync(NFS_CLIENT(dir), &msg, 0); - if (status == 0) - update_changeattr(dir, &res); + nfs_fattr_init(res.dir_attr); + status = rpc_call_sync(server->client, &msg, 0); + if (status == 0) { + update_changeattr(dir, &res.cinfo); + nfs_post_op_update_inode(dir, res.dir_attr); + } return status; } @@ -1646,12 +1655,14 @@ static int nfs4_proc_remove(struct inode *dir, struct qstr *name) struct unlink_desc { struct nfs4_remove_arg args; - struct nfs4_change_info res; + struct nfs4_remove_res res; + struct nfs_fattr dir_attr; }; static int nfs4_proc_unlink_setup(struct rpc_message *msg, struct dentry *dir, struct qstr *name) { + struct nfs_server *server = NFS_SERVER(dir->d_inode); struct unlink_desc *up; up = (struct unlink_desc *) kmalloc(sizeof(*up), GFP_KERNEL); @@ -1660,6 +1671,9 @@ static int nfs4_proc_unlink_setup(struct rpc_message *msg, struct dentry *dir, up->args.fh = NFS_FH(dir->d_inode); up->args.name = name; + up->args.bitmask = server->attr_bitmask; + up->res.server = server; + up->res.dir_attr = &up->dir_attr; msg->rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_REMOVE]; msg->rpc_argp = &up->args; @@ -1674,7 +1688,8 @@ static int nfs4_proc_unlink_done(struct dentry *dir, struct rpc_task *task) if (msg->rpc_resp != NULL) { up = container_of(msg->rpc_resp, struct unlink_desc, res); - update_changeattr(dir->d_inode, &up->res); + update_changeattr(dir->d_inode, &up->res.cinfo); + nfs_post_op_update_inode(dir->d_inode, up->res.dir_attr); kfree(up); msg->rpc_resp = NULL; msg->rpc_argp = NULL; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 2a07755bd347..3ee3a1669d28 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -306,10 +306,12 @@ static int nfs_stat_to_errno(int); decode_getfh_maxsz) #define NFS4_enc_remove_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ - encode_remove_maxsz) + encode_remove_maxsz + \ + encode_getattr_maxsz) #define NFS4_dec_remove_sz (compound_decode_hdr_maxsz + \ decode_putfh_maxsz + \ - op_decode_hdr_maxsz + 5) + op_decode_hdr_maxsz + 5 + \ + decode_getattr_maxsz) #define NFS4_enc_rename_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ encode_savefh_maxsz + \ @@ -1327,14 +1329,18 @@ static int nfs4_xdr_enc_remove(struct rpc_rqst *req, uint32_t *p, const struct n { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 2, + .nops = 3, }; int status; xdr_init_encode(&xdr, &req->rq_snd_buf, p); encode_compound_hdr(&xdr, &hdr); - if ((status = encode_putfh(&xdr, args->fh)) == 0) - status = encode_remove(&xdr, args->name); + if ((status = encode_putfh(&xdr, args->fh)) != 0) + goto out; + if ((status = encode_remove(&xdr, args->name)) != 0) + goto out; + status = encode_getfattr(&xdr, args->bitmask); +out: return status; } @@ -3512,7 +3518,7 @@ static int nfs4_xdr_dec_lookup_root(struct rpc_rqst *rqstp, uint32_t *p, struct /* * Decode REMOVE response */ -static int nfs4_xdr_dec_remove(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_change_info *cinfo) +static int nfs4_xdr_dec_remove(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_remove_res *res) { struct xdr_stream xdr; struct compound_hdr hdr; @@ -3521,8 +3527,11 @@ static int nfs4_xdr_dec_remove(struct rpc_rqst *rqstp, uint32_t *p, struct nfs4_ xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p); if ((status = decode_compound_hdr(&xdr, &hdr)) != 0) goto out; - if ((status = decode_putfh(&xdr)) == 0) - status = decode_remove(&xdr, cinfo); + if ((status = decode_putfh(&xdr)) != 0) + goto out; + if ((status = decode_remove(&xdr, &res->cinfo)) != 0) + goto out; + decode_getfattr(&xdr, res->dir_attr, res->server); out: return status; } diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 6f0804280824..deeba7e2c518 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -623,6 +623,13 @@ struct nfs4_readlink { struct nfs4_remove_arg { const struct nfs_fh * fh; const struct qstr * name; + const u32 * bitmask; +}; + +struct nfs4_remove_res { + const struct nfs_server * server; + struct nfs4_change_info cinfo; + struct nfs_fattr * dir_attr; }; struct nfs4_rename_arg { -- GitLab From 4f9838c7ecd14f31f701f64fa65ded132fc0db8a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:44 -0400 Subject: [PATCH 0446/1519] NFSv4: Add post-op attributes to NFSv4 write and commit callbacks. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 13 ++++++++++++- fs/nfs/nfs4xdr.c | 28 ++++++++++++++++++++++------ include/linux/nfs_xdr.h | 2 ++ 3 files changed, 36 insertions(+), 7 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index bab47c4cb41c..933e13b383f8 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2169,8 +2169,10 @@ nfs4_write_done(struct rpc_task *task) rpc_restart_call(task); return; } - if (task->tk_status >= 0) + if (task->tk_status >= 0) { renew_lease(NFS_SERVER(inode), data->timestamp); + nfs_post_op_update_inode(inode, data->res.fattr); + } /* Call back common NFS writeback processing */ nfs_writeback_done(task); } @@ -2186,6 +2188,7 @@ nfs4_proc_write_setup(struct nfs_write_data *data, int how) .rpc_cred = data->cred, }; struct inode *inode = data->inode; + struct nfs_server *server = NFS_SERVER(inode); int stable; int flags; @@ -2197,6 +2200,8 @@ nfs4_proc_write_setup(struct nfs_write_data *data, int how) } else stable = NFS_UNSTABLE; data->args.stable = stable; + data->args.bitmask = server->attr_bitmask; + data->res.server = server; data->timestamp = jiffies; @@ -2218,6 +2223,8 @@ nfs4_commit_done(struct rpc_task *task) rpc_restart_call(task); return; } + if (task->tk_status >= 0) + nfs_post_op_update_inode(inode, data->res.fattr); /* Call back common NFS writeback processing */ nfs_commit_done(task); } @@ -2233,8 +2240,12 @@ nfs4_proc_commit_setup(struct nfs_write_data *data, int how) .rpc_cred = data->cred, }; struct inode *inode = data->inode; + struct nfs_server *server = NFS_SERVER(inode); int flags; + data->args.bitmask = server->attr_bitmask; + data->res.server = server; + /* Set the initial flags for the task. */ flags = (how & FLUSH_SYNC) ? 0 : RPC_TASK_ASYNC; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 3ee3a1669d28..6f1bf182e0e0 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -159,16 +159,20 @@ static int nfs_stat_to_errno(int); op_decode_hdr_maxsz + 2) #define NFS4_enc_write_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ - op_encode_hdr_maxsz + 8) + op_encode_hdr_maxsz + 8 + \ + encode_getattr_maxsz) #define NFS4_dec_write_sz (compound_decode_hdr_maxsz + \ decode_putfh_maxsz + \ - op_decode_hdr_maxsz + 4) + op_decode_hdr_maxsz + 4 + \ + decode_getattr_maxsz) #define NFS4_enc_commit_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ - op_encode_hdr_maxsz + 3) + op_encode_hdr_maxsz + 3 + \ + encode_getattr_maxsz) #define NFS4_dec_commit_sz (compound_decode_hdr_maxsz + \ decode_putfh_maxsz + \ - op_decode_hdr_maxsz + 2) + op_decode_hdr_maxsz + 2 + \ + decode_getattr_maxsz) #define NFS4_enc_open_sz (compound_encode_hdr_maxsz + \ encode_putfh_maxsz + \ op_encode_hdr_maxsz + \ @@ -1799,7 +1803,7 @@ static int nfs4_xdr_enc_write(struct rpc_rqst *req, uint32_t *p, struct nfs_writ { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 2, + .nops = 3, }; int status; @@ -1809,6 +1813,9 @@ static int nfs4_xdr_enc_write(struct rpc_rqst *req, uint32_t *p, struct nfs_writ if (status) goto out; status = encode_write(&xdr, args); + if (status) + goto out; + status = encode_getfattr(&xdr, args->bitmask); out: return status; } @@ -1820,7 +1827,7 @@ static int nfs4_xdr_enc_commit(struct rpc_rqst *req, uint32_t *p, struct nfs_wri { struct xdr_stream xdr; struct compound_hdr hdr = { - .nops = 2, + .nops = 3, }; int status; @@ -1830,6 +1837,9 @@ static int nfs4_xdr_enc_commit(struct rpc_rqst *req, uint32_t *p, struct nfs_wri if (status) goto out; status = encode_commit(&xdr, args); + if (status) + goto out; + status = encode_getfattr(&xdr, args->bitmask); out: return status; } @@ -4001,6 +4011,9 @@ static int nfs4_xdr_dec_write(struct rpc_rqst *rqstp, uint32_t *p, struct nfs_wr if (status) goto out; status = decode_write(&xdr, res); + if (status) + goto out; + decode_getfattr(&xdr, res->fattr, res->server); if (!status) status = res->count; out: @@ -4024,6 +4037,9 @@ static int nfs4_xdr_dec_commit(struct rpc_rqst *rqstp, uint32_t *p, struct nfs_w if (status) goto out; status = decode_commit(&xdr, res); + if (status) + goto out; + decode_getfattr(&xdr, res->fattr, res->server); out: return status; } diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index deeba7e2c518..40718669b9c8 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -256,6 +256,7 @@ struct nfs_writeargs { enum nfs3_stable_how stable; unsigned int pgbase; struct page ** pages; + const u32 * bitmask; }; struct nfs_writeverf { @@ -267,6 +268,7 @@ struct nfs_writeres { struct nfs_fattr * fattr; struct nfs_writeverf * verf; __u32 count; + const struct nfs_server *server; }; /* -- GitLab From 16c32b71bc53d6f7143702ebb264b4ef20d8f1e5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:45 -0400 Subject: [PATCH 0447/1519] NFSv4: Convert unnecessary XDR warning messages into dprintk() Signed-off-by: Trond Myklebust --- fs/nfs/nfs4xdr.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 6f1bf182e0e0..fbbace8a30c4 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -2766,8 +2766,7 @@ static int decode_server_caps(struct xdr_stream *xdr, struct nfs4_server_caps_re goto xdr_error; status = verify_attr_len(xdr, savep, attrlen); xdr_error: - if (status != 0) - printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status); + dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status); return status; } @@ -2800,8 +2799,7 @@ static int decode_statfs(struct xdr_stream *xdr, struct nfs_fsstat *fsstat) status = verify_attr_len(xdr, savep, attrlen); xdr_error: - if (status != 0) - printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status); + dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status); return status; } @@ -2826,8 +2824,7 @@ static int decode_pathconf(struct xdr_stream *xdr, struct nfs_pathconf *pathconf status = verify_attr_len(xdr, savep, attrlen); xdr_error: - if (status != 0) - printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status); + dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status); return status; } @@ -2886,8 +2883,7 @@ static int decode_getfattr(struct xdr_stream *xdr, struct nfs_fattr *fattr, cons if ((status = verify_attr_len(xdr, savep, attrlen)) == 0) fattr->valid = NFS_ATTR_FATTR | NFS_ATTR_FATTR_V3 | NFS_ATTR_FATTR_V4; xdr_error: - if (status != 0) - printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status); + dprintk("%s: xdr returned %d\n", __FUNCTION__, -status); return status; } @@ -2920,8 +2916,7 @@ static int decode_fsinfo(struct xdr_stream *xdr, struct nfs_fsinfo *fsinfo) status = verify_attr_len(xdr, savep, attrlen); xdr_error: - if (status != 0) - printk(KERN_NOTICE "%s: xdr error %d!\n", __FUNCTION__, -status); + dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status); return status; } @@ -3088,7 +3083,7 @@ static int decode_open(struct xdr_stream *xdr, struct nfs_openres *res) p += bmlen; return decode_delegation(xdr, res); xdr_error: - printk(KERN_NOTICE "%s: xdr error!\n", __FUNCTION__); + dprintk("%s: Bitmap too large! Length = %u\n", __FUNCTION__, bmlen); return -EIO; } -- GitLab From bec273b491bd16351a9cdb8e9a51d30afa7fe9f4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:45 -0400 Subject: [PATCH 0448/1519] NFS: Allow files that are open for write to invalidate caches Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 6b3156e15350..f2781ca42761 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1057,15 +1057,11 @@ int nfs_open(struct inode *inode, struct file *filp) ctx->mode = filp->f_mode; nfs_file_set_open_context(filp, ctx); put_nfs_open_context(ctx); - if ((filp->f_mode & FMODE_WRITE) != 0) - nfs_begin_data_update(inode); return 0; } int nfs_release(struct inode *inode, struct file *filp) { - if ((filp->f_mode & FMODE_WRITE) != 0) - nfs_end_data_update(inode); nfs_file_clear_open_context(filp); return 0; } -- GitLab From 6070fe6f82c67021367092855c0812a98becf0fa Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 22:12:46 -0400 Subject: [PATCH 0449/1519] RPC: Ensure that nobody can queue up new upcalls after rpc_close_pipes() Signed-off-by: Trond Myklebust --- net/sunrpc/rpc_pipe.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index ded6c63f11ec..4f188d0a5d11 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -76,25 +76,35 @@ int rpc_queue_upcall(struct inode *inode, struct rpc_pipe_msg *msg) { struct rpc_inode *rpci = RPC_I(inode); - int res = 0; + int res = -EPIPE; down(&inode->i_sem); + if (rpci->ops == NULL) + goto out; if (rpci->nreaders) { list_add_tail(&msg->list, &rpci->pipe); rpci->pipelen += msg->len; + res = 0; } else if (rpci->flags & RPC_PIPE_WAIT_FOR_OPEN) { if (list_empty(&rpci->pipe)) schedule_delayed_work(&rpci->queue_timeout, RPC_UPCALL_TIMEOUT); list_add_tail(&msg->list, &rpci->pipe); rpci->pipelen += msg->len; - } else - res = -EPIPE; + res = 0; + } +out: up(&inode->i_sem); wake_up(&rpci->waitq); return res; } +static inline void +rpc_inode_setowner(struct inode *inode, void *private) +{ + RPC_I(inode)->private = private; +} + static void rpc_close_pipes(struct inode *inode) { @@ -111,15 +121,10 @@ rpc_close_pipes(struct inode *inode) rpci->ops->release_pipe(inode); rpci->ops = NULL; } + rpc_inode_setowner(inode, NULL); up(&inode->i_sem); } -static inline void -rpc_inode_setowner(struct inode *inode, void *private) -{ - RPC_I(inode)->private = private; -} - static struct inode * rpc_alloc_inode(struct super_block *sb) { @@ -501,7 +506,6 @@ rpc_depopulate(struct dentry *parent) dentry = dvec[--n]; if (dentry->d_inode) { rpc_close_pipes(dentry->d_inode); - rpc_inode_setowner(dentry->d_inode, NULL); simple_unlink(dir, dentry); } dput(dentry); @@ -576,10 +580,8 @@ __rpc_rmdir(struct inode *dir, struct dentry *dentry) int error; shrink_dcache_parent(dentry); - if (dentry->d_inode) { + if (dentry->d_inode) rpc_close_pipes(dentry->d_inode); - rpc_inode_setowner(dentry->d_inode, NULL); - } if ((error = simple_rmdir(dir, dentry)) != 0) return error; if (!error) { @@ -732,7 +734,6 @@ rpc_unlink(char *path) d_drop(dentry); if (dentry->d_inode) { rpc_close_pipes(dentry->d_inode); - rpc_inode_setowner(dentry->d_inode, NULL); error = simple_unlink(dir, dentry); } dput(dentry); -- GitLab From 089a1bedd84be16a4f49a319e7ccb4a128da5ce9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 27 Oct 2005 20:33:43 -0700 Subject: [PATCH 0450/1519] [IB] ib_umad: fix crash when freeing send buffers The conversion of user_mad.c to the new MAD send API was slightly off: in a few places, we used packet->msg instead of packet->msg->mad when referring to the actual data buffer, which ended up corrupting the underlying data structure and crashing when we free an invalid pointer. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index fc5519a3de99..a48166a8e04b 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -398,12 +398,12 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, * transaction ID matches the agent being used to send the * MAD. */ - method = ((struct ib_mad_hdr *) packet->msg)->method; + method = ((struct ib_mad_hdr *) packet->msg->mad)->method; if (!(method & IB_MGMT_METHOD_RESP) && method != IB_MGMT_METHOD_TRAP_REPRESS && method != IB_MGMT_METHOD_SEND) { - tid = &((struct ib_mad_hdr *) packet->msg)->tid; + tid = &((struct ib_mad_hdr *) packet->msg->mad)->tid; *tid = cpu_to_be64(((u64) agent->hi_tid) << 32 | (be64_to_cpup(tid) & 0xffffffff)); } -- GitLab From cb0f0910f4b41772a6771bdb4fb2d419b27bcd77 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 27 Oct 2005 20:48:11 -0700 Subject: [PATCH 0451/1519] [IB] ib_umad: various cleanups Simplify user_mad.c code in a few places, and convert from kmalloc() + memset() to kzalloc(). This also fixes a theoretical race window by not accessing packet->length after posting the send buffer (the send could complete and packet could be freed before we get to the return statement at the end of ib_umad_write()). Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 73 +++++++++--------------------- 1 file changed, 21 insertions(+), 52 deletions(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index a48166a8e04b..17ec0a19dbc0 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -99,7 +99,6 @@ struct ib_umad_packet { struct ib_mad_send_buf *msg; struct list_head list; int length; - DECLARE_PCI_UNMAP_ADDR(mapping) struct ib_user_mad mad; }; @@ -145,15 +144,12 @@ static void send_handler(struct ib_mad_agent *agent, ib_free_send_mad(packet->msg); if (send_wc->status == IB_WC_RESP_TIMEOUT_ERR) { - timeout = kmalloc(sizeof *timeout + sizeof (struct ib_mad_hdr), - GFP_KERNEL); + timeout = kzalloc(sizeof *timeout + IB_MGMT_MAD_HDR, GFP_KERNEL); if (!timeout) goto out; - memset(timeout, 0, sizeof *timeout + sizeof (struct ib_mad_hdr)); - - timeout->length = sizeof (struct ib_mad_hdr); - timeout->mad.hdr.id = packet->mad.hdr.id; + timeout->length = IB_MGMT_MAD_HDR; + timeout->mad.hdr.id = packet->mad.hdr.id; timeout->mad.hdr.status = ETIMEDOUT; memcpy(timeout->mad.data, packet->mad.data, sizeof (struct ib_mad_hdr)); @@ -176,11 +172,10 @@ static void recv_handler(struct ib_mad_agent *agent, goto out; length = mad_recv_wc->mad_len; - packet = kmalloc(sizeof *packet + length, GFP_KERNEL); + packet = kzalloc(sizeof *packet + length, GFP_KERNEL); if (!packet) goto out; - memset(packet, 0, sizeof *packet + length); packet->length = length; ib_coalesce_recv_mad(mad_recv_wc, packet->mad.data); @@ -246,7 +241,7 @@ static ssize_t ib_umad_read(struct file *filp, char __user *buf, else ret = -ENOSPC; } else if (copy_to_user(buf, &packet->mad, - packet->length + sizeof (struct ib_user_mad))) + packet->length + sizeof (struct ib_user_mad))) ret = -EFAULT; else ret = packet->length + sizeof (struct ib_user_mad); @@ -271,22 +266,19 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, struct ib_rmpp_mad *rmpp_mad; u8 method; __be64 *tid; - int ret, length, hdr_len, rmpp_hdr_size; + int ret, length, hdr_len, copy_offset; int rmpp_active = 0; if (count < sizeof (struct ib_user_mad)) return -EINVAL; length = count - sizeof (struct ib_user_mad); - packet = kmalloc(sizeof *packet + sizeof(struct ib_mad_hdr) + - sizeof (struct ib_rmpp_hdr), GFP_KERNEL); + packet = kmalloc(sizeof *packet + IB_MGMT_RMPP_HDR, GFP_KERNEL); if (!packet) return -ENOMEM; if (copy_from_user(&packet->mad, buf, - sizeof (struct ib_user_mad) + - sizeof (struct ib_mad_hdr) + - sizeof (struct ib_rmpp_hdr))) { + sizeof (struct ib_user_mad) + IB_MGMT_RMPP_HDR)) { ret = -EFAULT; goto err; } @@ -297,8 +289,6 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, goto err; } - packet->length = length; - down_read(&file->agent_mutex); agent = file->agent[packet->mad.hdr.id]; @@ -345,12 +335,10 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, goto err_ah; } rmpp_active = 1; + copy_offset = IB_MGMT_RMPP_HDR; } else { - if (length > sizeof (struct ib_mad)) { - ret = -EINVAL; - goto err_ah; - } hdr_len = IB_MGMT_MAD_HDR; + copy_offset = IB_MGMT_MAD_HDR; } packet->msg = ib_create_send_mad(agent, @@ -368,28 +356,14 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, packet->msg->retries = packet->mad.hdr.retries; packet->msg->context[0] = packet; - if (!rmpp_active) { - /* Copy message from user into send buffer */ - if (copy_from_user(packet->msg->mad, - buf + sizeof (struct ib_user_mad), length)) { - ret = -EFAULT; - goto err_msg; - } - } else { - rmpp_hdr_size = sizeof (struct ib_mad_hdr) + - sizeof (struct ib_rmpp_hdr); - - /* Only copy MAD headers (RMPP header in place) */ - memcpy(packet->msg->mad, packet->mad.data, - sizeof (struct ib_mad_hdr)); - - /* Now, copy rest of message from user into send buffer */ - if (copy_from_user(((struct ib_rmpp_mad *) packet->msg->mad)->data, - buf + sizeof (struct ib_user_mad) + rmpp_hdr_size, - length - rmpp_hdr_size)) { - ret = -EFAULT; - goto err_msg; - } + /* Copy MAD headers (RMPP header in place) */ + memcpy(packet->msg->mad, packet->mad.data, IB_MGMT_MAD_HDR); + /* Now, copy rest of message from user into send buffer */ + if (copy_from_user(packet->msg->mad + copy_offset, + buf + sizeof (struct ib_user_mad) + copy_offset, + length - copy_offset)) { + ret = -EFAULT; + goto err_msg; } /* @@ -414,7 +388,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, up_read(&file->agent_mutex); - return sizeof (struct ib_user_mad_hdr) + packet->length; + return count; err_msg: ib_free_send_mad(packet->msg); @@ -564,12 +538,10 @@ static int ib_umad_open(struct inode *inode, struct file *filp) container_of(inode->i_cdev, struct ib_umad_port, dev); struct ib_umad_file *file; - file = kmalloc(sizeof *file, GFP_KERNEL); + file = kzalloc(sizeof *file, GFP_KERNEL); if (!file) return -ENOMEM; - memset(file, 0, sizeof *file); - spin_lock_init(&file->recv_lock); init_rwsem(&file->agent_mutex); INIT_LIST_HEAD(&file->recv_list); @@ -814,15 +786,12 @@ static void ib_umad_add_one(struct ib_device *device) e = device->phys_port_cnt; } - umad_dev = kmalloc(sizeof *umad_dev + + umad_dev = kzalloc(sizeof *umad_dev + (e - s + 1) * sizeof (struct ib_umad_port), GFP_KERNEL); if (!umad_dev) return; - memset(umad_dev, 0, sizeof *umad_dev + - (e - s + 1) * sizeof (struct ib_umad_port)); - kref_init(&umad_dev->ref); umad_dev->start_port = s; -- GitLab From 20e5c81fcff89535dced2ed71cf24c6c648ff40e Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Thu, 13 Oct 2005 21:48:42 +0200 Subject: [PATCH 0452/1519] [patch] remove gendisk->stamp_idle field struct gendisk has these two fields: stamp, stamp_idle. Update to stamp_idle is always in sync with stamp and they are always the same. Therefore, it does not add any value in having two fields tracking same timestamp. Suggest to remove it. Also, we should only update gendisk stats with non-zero value. Advantage is that we don't have to needlessly calculate memory address, and then add zero to the content. Signed-off-by: Ken Chen Signed-off-by: Jens Axboe --- drivers/block/ll_rw_blk.c | 11 +++++------ fs/partitions/check.c | 2 +- include/linux/genhd.h | 2 +- 3 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index baedac522945..c42071fd2e95 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -2433,13 +2433,12 @@ void disk_round_stats(struct gendisk *disk) { unsigned long now = jiffies; - __disk_stat_add(disk, time_in_queue, - disk->in_flight * (now - disk->stamp)); + if (disk->in_flight) { + __disk_stat_add(disk, time_in_queue, + disk->in_flight * (now - disk->stamp)); + __disk_stat_add(disk, io_ticks, (now - disk->stamp)); + } disk->stamp = now; - - if (disk->in_flight) - __disk_stat_add(disk, io_ticks, (now - disk->stamp_idle)); - disk->stamp_idle = now; } /* diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 77e178f13162..1e848648a322 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -430,7 +430,7 @@ void del_gendisk(struct gendisk *disk) disk->flags &= ~GENHD_FL_UP; unlink_gendisk(disk); disk_stat_set_all(disk, 0); - disk->stamp = disk->stamp_idle = 0; + disk->stamp = 0; devfs_remove_disk(disk); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 01796c41c951..142e1c1e0689 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -119,7 +119,7 @@ struct gendisk { int policy; atomic_t sync_io; /* RAID */ - unsigned long stamp, stamp_idle; + unsigned long stamp; int in_flight; #ifdef CONFIG_SMP struct disk_stats *dkstats; -- GitLab From b2982649ce38293b14684b26bcda20cfc54164e6 Mon Sep 17 00:00:00 2001 From: "Chen, Kenneth W" Date: Thu, 13 Oct 2005 21:49:29 +0200 Subject: [PATCH 0453/1519] Following the same idea, it occurs to me that we should only update disk stat when "now" is different from disk->stamp. Otherwise, we are again needlessly adding zero to the stats. Signed-off-by: Ken Chen Signed-off-by: Jens Axboe --- drivers/block/ll_rw_blk.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index c42071fd2e95..4e2b1b06b411 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -2433,6 +2433,9 @@ void disk_round_stats(struct gendisk *disk) { unsigned long now = jiffies; + if (now == disk->stamp) + return; + if (disk->in_flight) { __disk_stat_add(disk, time_in_queue, disk->in_flight * (now - disk->stamp)); -- GitLab From 2824bc9328467127083c1325f54b67d298c333b2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 10:56:41 +0200 Subject: [PATCH 0454/1519] [PATCH] fix try_module_get race in elevator_find This patch removes try_module_get race in elevator_find. try_module_get should always be called with the spinlock protecting what the module init/cleanup routines register/unregister to held. In the case of elevators, we should be holding elv_list to avoid it going away between spin_unlock_irq and try_module_get. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 98f0126a2deb..4144f30d82a9 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -97,7 +97,6 @@ static struct elevator_type *elevator_find(const char *name) struct elevator_type *e = NULL; struct list_head *entry; - spin_lock_irq(&elv_list_lock); list_for_each(entry, &elv_list) { struct elevator_type *__e; @@ -108,7 +107,6 @@ static struct elevator_type *elevator_find(const char *name) break; } } - spin_unlock_irq(&elv_list_lock); return e; } @@ -120,12 +118,15 @@ static void elevator_put(struct elevator_type *e) static struct elevator_type *elevator_get(const char *name) { - struct elevator_type *e = elevator_find(name); + struct elevator_type *e; - if (!e) - return NULL; - if (!try_module_get(e->elevator_owner)) - return NULL; + spin_lock_irq(&elv_list_lock); + + e = elevator_find(name); + if (e && !try_module_get(e->elevator_owner)) + e = NULL; + + spin_unlock_irq(&elv_list_lock); return e; } @@ -153,11 +154,15 @@ static char chosen_elevator[16]; static void elevator_setup_default(void) { + struct elevator_type *e; + /* * check if default is set and exists */ - if (chosen_elevator[0] && elevator_find(chosen_elevator)) + if (chosen_elevator[0] && (e = elevator_get(chosen_elevator))) { + elevator_put(e); return; + } #if defined(CONFIG_IOSCHED_AS) strcpy(chosen_elevator, "anticipatory"); @@ -555,10 +560,9 @@ void elv_unregister_queue(struct request_queue *q) int elv_register(struct elevator_type *e) { + spin_lock_irq(&elv_list_lock); if (elevator_find(e->elevator_name)) BUG(); - - spin_lock_irq(&elv_list_lock); list_add_tail(&e->list, &elv_list); spin_unlock_irq(&elv_list_lock); -- GitLab From 8922e16cf6269e668123acb1ae1fdc62b7a3a4fc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 16:23:44 +0200 Subject: [PATCH 0455/1519] [PATCH] 01/05 Implement generic dispatch queue Implements generic dispatch queue which can replace all dispatch queues implemented by each iosched. This reduces code duplication, eases enforcing semantics over dispatch queue, and simplifies specific ioscheds. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 242 ++++++++++++++++++++++++++------------ drivers/block/ll_rw_blk.c | 23 ++-- include/linux/blkdev.h | 17 ++- include/linux/elevator.h | 16 ++- 4 files changed, 201 insertions(+), 97 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 4144f30d82a9..a27555908d35 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -40,6 +40,11 @@ static DEFINE_SPINLOCK(elv_list_lock); static LIST_HEAD(elv_list); +static inline sector_t rq_last_sector(struct request *rq) +{ + return rq->sector + rq->nr_sectors; +} + /* * can we safely merge with this request? */ @@ -143,6 +148,9 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e, INIT_LIST_HEAD(&q->queue_head); q->last_merge = NULL; q->elevator = eq; + q->last_sector = 0; + q->boundary_rq = NULL; + q->max_back_kb = 0; if (eq->ops->elevator_init_fn) ret = eq->ops->elevator_init_fn(q, eq); @@ -225,6 +233,48 @@ void elevator_exit(elevator_t *e) kfree(e); } +/* + * Insert rq into dispatch queue of q. Queue lock must be held on + * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be + * appended to the dispatch queue. To be used by specific elevators. + */ +void elv_dispatch_insert(request_queue_t *q, struct request *rq, int sort) +{ + sector_t boundary; + unsigned max_back; + struct list_head *entry; + + if (!sort) { + /* Specific elevator is performing sort. Step away. */ + q->last_sector = rq_last_sector(rq); + q->boundary_rq = rq; + list_add_tail(&rq->queuelist, &q->queue_head); + return; + } + + boundary = q->last_sector; + max_back = q->max_back_kb * 2; + boundary = boundary > max_back ? boundary - max_back : 0; + + list_for_each_prev(entry, &q->queue_head) { + struct request *pos = list_entry_rq(entry); + + if (pos->flags & (REQ_SOFTBARRIER|REQ_HARDBARRIER|REQ_STARTED)) + break; + if (rq->sector >= boundary) { + if (pos->sector < boundary) + continue; + } else { + if (pos->sector >= boundary) + break; + } + if (rq->sector >= pos->sector) + break; + } + + list_add(&rq->queuelist, entry); +} + int elv_merge(request_queue_t *q, struct request **req, struct bio *bio) { elevator_t *e = q->elevator; @@ -255,13 +305,7 @@ void elv_merge_requests(request_queue_t *q, struct request *rq, e->ops->elevator_merge_req_fn(q, rq, next); } -/* - * For careful internal use by the block layer. Essentially the same as - * a requeue in that it tells the io scheduler that this request is not - * active in the driver or hardware anymore, but we don't want the request - * added back to the scheduler. Function is not exported. - */ -void elv_deactivate_request(request_queue_t *q, struct request *rq) +void elv_requeue_request(request_queue_t *q, struct request *rq) { elevator_t *e = q->elevator; @@ -269,19 +313,14 @@ void elv_deactivate_request(request_queue_t *q, struct request *rq) * it already went through dequeue, we need to decrement the * in_flight count again */ - if (blk_account_rq(rq)) + if (blk_account_rq(rq)) { q->in_flight--; + if (blk_sorted_rq(rq) && e->ops->elevator_deactivate_req_fn) + e->ops->elevator_deactivate_req_fn(q, rq); + } rq->flags &= ~REQ_STARTED; - if (e->ops->elevator_deactivate_req_fn) - e->ops->elevator_deactivate_req_fn(q, rq); -} - -void elv_requeue_request(request_queue_t *q, struct request *rq) -{ - elv_deactivate_request(q, rq); - /* * if this is the flush, requeue the original instead and drop the flush */ @@ -290,55 +329,89 @@ void elv_requeue_request(request_queue_t *q, struct request *rq) rq = rq->end_io_data; } - /* - * the request is prepped and may have some resources allocated. - * allowing unprepped requests to pass this one may cause resource - * deadlock. turn on softbarrier. - */ - rq->flags |= REQ_SOFTBARRIER; - - /* - * if iosched has an explicit requeue hook, then use that. otherwise - * just put the request at the front of the queue - */ - if (q->elevator->ops->elevator_requeue_req_fn) - q->elevator->ops->elevator_requeue_req_fn(q, rq); - else - __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0); + __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0); } void __elv_add_request(request_queue_t *q, struct request *rq, int where, int plug) { - /* - * barriers implicitly indicate back insertion - */ - if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER) && - where == ELEVATOR_INSERT_SORT) - where = ELEVATOR_INSERT_BACK; + if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) { + /* + * barriers implicitly indicate back insertion + */ + if (where == ELEVATOR_INSERT_SORT) + where = ELEVATOR_INSERT_BACK; + + /* + * this request is scheduling boundary, update last_sector + */ + if (blk_fs_request(rq)) { + q->last_sector = rq_last_sector(rq); + q->boundary_rq = rq; + } + } if (plug) blk_plug_device(q); rq->q = q; - if (!test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)) { - q->elevator->ops->elevator_add_req_fn(q, rq, where); - - if (blk_queue_plugged(q)) { - int nrq = q->rq.count[READ] + q->rq.count[WRITE] - - q->in_flight; - - if (nrq >= q->unplug_thresh) - __generic_unplug_device(q); - } - } else + if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) { /* * if drain is set, store the request "locally". when the drain * is finished, the requests will be handed ordered to the io * scheduler */ list_add_tail(&rq->queuelist, &q->drain_list); + return; + } + + switch (where) { + case ELEVATOR_INSERT_FRONT: + rq->flags |= REQ_SOFTBARRIER; + + list_add(&rq->queuelist, &q->queue_head); + break; + + case ELEVATOR_INSERT_BACK: + rq->flags |= REQ_SOFTBARRIER; + + while (q->elevator->ops->elevator_dispatch_fn(q, 1)) + ; + list_add_tail(&rq->queuelist, &q->queue_head); + /* + * We kick the queue here for the following reasons. + * - The elevator might have returned NULL previously + * to delay requests and returned them now. As the + * queue wasn't empty before this request, ll_rw_blk + * won't run the queue on return, resulting in hang. + * - Usually, back inserted requests won't be merged + * with anything. There's no point in delaying queue + * processing. + */ + blk_remove_plug(q); + q->request_fn(q); + break; + + case ELEVATOR_INSERT_SORT: + BUG_ON(!blk_fs_request(rq)); + rq->flags |= REQ_SORTED; + q->elevator->ops->elevator_add_req_fn(q, rq); + break; + + default: + printk(KERN_ERR "%s: bad insertion point %d\n", + __FUNCTION__, where); + BUG(); + } + + if (blk_queue_plugged(q)) { + int nrq = q->rq.count[READ] + q->rq.count[WRITE] + - q->in_flight; + + if (nrq >= q->unplug_thresh) + __generic_unplug_device(q); + } } void elv_add_request(request_queue_t *q, struct request *rq, int where, @@ -353,13 +426,19 @@ void elv_add_request(request_queue_t *q, struct request *rq, int where, static inline struct request *__elv_next_request(request_queue_t *q) { - struct request *rq = q->elevator->ops->elevator_next_req_fn(q); + struct request *rq; + + if (unlikely(list_empty(&q->queue_head) && + !q->elevator->ops->elevator_dispatch_fn(q, 0))) + return NULL; + + rq = list_entry_rq(q->queue_head.next); /* * if this is a barrier write and the device has to issue a * flush sequence to support it, check how far we are */ - if (rq && blk_fs_request(rq) && blk_barrier_rq(rq)) { + if (blk_fs_request(rq) && blk_barrier_rq(rq)) { BUG_ON(q->ordered == QUEUE_ORDERED_NONE); if (q->ordered == QUEUE_ORDERED_FLUSH && @@ -376,16 +455,34 @@ struct request *elv_next_request(request_queue_t *q) int ret; while ((rq = __elv_next_request(q)) != NULL) { - /* - * just mark as started even if we don't start it, a request - * that has been delayed should not be passed by new incoming - * requests - */ - rq->flags |= REQ_STARTED; + if (!(rq->flags & REQ_STARTED)) { + elevator_t *e = q->elevator; + + /* + * This is the first time the device driver + * sees this request (possibly after + * requeueing). Notify IO scheduler. + */ + if (blk_sorted_rq(rq) && + e->ops->elevator_activate_req_fn) + e->ops->elevator_activate_req_fn(q, rq); + + /* + * just mark as started even if we don't start + * it, a request that has been delayed should + * not be passed by new incoming requests + */ + rq->flags |= REQ_STARTED; + } if (rq == q->last_merge) q->last_merge = NULL; + if (!q->boundary_rq || q->boundary_rq == rq) { + q->last_sector = rq_last_sector(rq); + q->boundary_rq = NULL; + } + if ((rq->flags & REQ_DONTPREP) || !q->prep_rq_fn) break; @@ -396,9 +493,9 @@ struct request *elv_next_request(request_queue_t *q) /* * the request may have been (partially) prepped. * we need to keep this request in the front to - * avoid resource deadlock. turn on softbarrier. + * avoid resource deadlock. REQ_STARTED will + * prevent other fs requests from passing this one. */ - rq->flags |= REQ_SOFTBARRIER; rq = NULL; break; } else if (ret == BLKPREP_KILL) { @@ -421,16 +518,16 @@ struct request *elv_next_request(request_queue_t *q) return rq; } -void elv_remove_request(request_queue_t *q, struct request *rq) +void elv_dequeue_request(request_queue_t *q, struct request *rq) { - elevator_t *e = q->elevator; + BUG_ON(list_empty(&rq->queuelist)); + + list_del_init(&rq->queuelist); /* * the time frame between a request being removed from the lists * and to it is freed is accounted as io that is in progress at - * the driver side. note that we only account requests that the - * driver has seen (REQ_STARTED set), to avoid false accounting - * for request-request merges + * the driver side. */ if (blk_account_rq(rq)) q->in_flight++; @@ -444,19 +541,19 @@ void elv_remove_request(request_queue_t *q, struct request *rq) */ if (rq == q->last_merge) q->last_merge = NULL; - - if (e->ops->elevator_remove_req_fn) - e->ops->elevator_remove_req_fn(q, rq); } int elv_queue_empty(request_queue_t *q) { elevator_t *e = q->elevator; + if (!list_empty(&q->queue_head)) + return 0; + if (e->ops->elevator_queue_empty_fn) return e->ops->elevator_queue_empty_fn(q); - return list_empty(&q->queue_head); + return 1; } struct request *elv_latter_request(request_queue_t *q, struct request *rq) @@ -528,11 +625,11 @@ void elv_completed_request(request_queue_t *q, struct request *rq) /* * request is released from the driver, io must be done */ - if (blk_account_rq(rq)) + if (blk_account_rq(rq)) { q->in_flight--; - - if (e->ops->elevator_completed_req_fn) - e->ops->elevator_completed_req_fn(q, rq); + if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn) + e->ops->elevator_completed_req_fn(q, rq); + } } int elv_register_queue(struct request_queue *q) @@ -705,11 +802,12 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name) return len; } +EXPORT_SYMBOL(elv_dispatch_insert); EXPORT_SYMBOL(elv_add_request); EXPORT_SYMBOL(__elv_add_request); EXPORT_SYMBOL(elv_requeue_request); EXPORT_SYMBOL(elv_next_request); -EXPORT_SYMBOL(elv_remove_request); +EXPORT_SYMBOL(elv_dequeue_request); EXPORT_SYMBOL(elv_queue_empty); EXPORT_SYMBOL(elv_completed_request); EXPORT_SYMBOL(elevator_exit); diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index 4e2b1b06b411..d2a66fd309c3 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -353,6 +353,8 @@ static void blk_pre_flush_end_io(struct request *flush_rq) struct request *rq = flush_rq->end_io_data; request_queue_t *q = rq->q; + elv_completed_request(q, flush_rq); + rq->flags |= REQ_BAR_PREFLUSH; if (!flush_rq->errors) @@ -369,6 +371,8 @@ static void blk_post_flush_end_io(struct request *flush_rq) struct request *rq = flush_rq->end_io_data; request_queue_t *q = rq->q; + elv_completed_request(q, flush_rq); + rq->flags |= REQ_BAR_POSTFLUSH; q->end_flush_fn(q, flush_rq); @@ -408,8 +412,6 @@ struct request *blk_start_pre_flush(request_queue_t *q, struct request *rq) if (!list_empty(&rq->queuelist)) blkdev_dequeue_request(rq); - elv_deactivate_request(q, rq); - flush_rq->end_io_data = rq; flush_rq->end_io = blk_pre_flush_end_io; @@ -1040,6 +1042,7 @@ EXPORT_SYMBOL(blk_queue_invalidate_tags); static char *rq_flags[] = { "REQ_RW", "REQ_FAILFAST", + "REQ_SORTED", "REQ_SOFTBARRIER", "REQ_HARDBARRIER", "REQ_CMD", @@ -2456,6 +2459,8 @@ static void __blk_put_request(request_queue_t *q, struct request *req) if (unlikely(--req->ref_count)) return; + elv_completed_request(q, req); + req->rq_status = RQ_INACTIVE; req->rl = NULL; @@ -2466,8 +2471,6 @@ static void __blk_put_request(request_queue_t *q, struct request *req) if (rl) { int rw = rq_data_dir(req); - elv_completed_request(q, req); - BUG_ON(!list_empty(&req->queuelist)); blk_free_request(q, req); @@ -2477,14 +2480,14 @@ static void __blk_put_request(request_queue_t *q, struct request *req) void blk_put_request(struct request *req) { + unsigned long flags; + request_queue_t *q = req->q; + /* - * if req->rl isn't set, this request didnt originate from the - * block layer, so it's safe to just disregard it + * Gee, IDE calls in w/ NULL q. Fix IDE and remove the + * following if (q) test. */ - if (req->rl) { - unsigned long flags; - request_queue_t *q = req->q; - + if (q) { spin_lock_irqsave(q->queue_lock, flags); __blk_put_request(q, req); spin_unlock_irqrestore(q->queue_lock, flags); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index efdc9b5bc05c..2c7b9154927a 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -203,6 +203,7 @@ struct request { enum rq_flag_bits { __REQ_RW, /* not set, read. set, write */ __REQ_FAILFAST, /* no low level driver retries */ + __REQ_SORTED, /* elevator knows about this request */ __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */ __REQ_HARDBARRIER, /* may not be passed by drive either */ __REQ_CMD, /* is a regular fs rw request */ @@ -235,6 +236,7 @@ enum rq_flag_bits { #define REQ_RW (1 << __REQ_RW) #define REQ_FAILFAST (1 << __REQ_FAILFAST) +#define REQ_SORTED (1 << __REQ_SORTED) #define REQ_SOFTBARRIER (1 << __REQ_SOFTBARRIER) #define REQ_HARDBARRIER (1 << __REQ_HARDBARRIER) #define REQ_CMD (1 << __REQ_CMD) @@ -332,6 +334,13 @@ struct request_queue prepare_flush_fn *prepare_flush_fn; end_flush_fn *end_flush_fn; + /* + * Dispatch queue sorting + */ + sector_t last_sector; + struct request *boundary_rq; + unsigned int max_back_kb; + /* * Auto-unplugging state */ @@ -454,6 +463,7 @@ enum { #define blk_pm_request(rq) \ ((rq)->flags & (REQ_PM_SUSPEND | REQ_PM_RESUME)) +#define blk_sorted_rq(rq) ((rq)->flags & REQ_SORTED) #define blk_barrier_rq(rq) ((rq)->flags & REQ_HARDBARRIER) #define blk_barrier_preflush(rq) ((rq)->flags & REQ_BAR_PREFLUSH) #define blk_barrier_postflush(rq) ((rq)->flags & REQ_BAR_POSTFLUSH) @@ -611,12 +621,7 @@ extern void end_request(struct request *req, int uptodate); static inline void blkdev_dequeue_request(struct request *req) { - BUG_ON(list_empty(&req->queuelist)); - - list_del_init(&req->queuelist); - - if (req->rl) - elv_remove_request(req->q, req); + elv_dequeue_request(req->q, req); } /* diff --git a/include/linux/elevator.h b/include/linux/elevator.h index ea6bbc2d7407..76f4f6920744 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -8,18 +8,17 @@ typedef void (elevator_merge_req_fn) (request_queue_t *, struct request *, struc typedef void (elevator_merged_fn) (request_queue_t *, struct request *); -typedef struct request *(elevator_next_req_fn) (request_queue_t *); +typedef int (elevator_dispatch_fn) (request_queue_t *, int); -typedef void (elevator_add_req_fn) (request_queue_t *, struct request *, int); +typedef void (elevator_add_req_fn) (request_queue_t *, struct request *); typedef int (elevator_queue_empty_fn) (request_queue_t *); -typedef void (elevator_remove_req_fn) (request_queue_t *, struct request *); -typedef void (elevator_requeue_req_fn) (request_queue_t *, struct request *); typedef struct request *(elevator_request_list_fn) (request_queue_t *, struct request *); typedef void (elevator_completed_req_fn) (request_queue_t *, struct request *); typedef int (elevator_may_queue_fn) (request_queue_t *, int, struct bio *); typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, int); typedef void (elevator_put_req_fn) (request_queue_t *, struct request *); +typedef void (elevator_activate_req_fn) (request_queue_t *, struct request *); typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *); typedef int (elevator_init_fn) (request_queue_t *, elevator_t *); @@ -31,10 +30,9 @@ struct elevator_ops elevator_merged_fn *elevator_merged_fn; elevator_merge_req_fn *elevator_merge_req_fn; - elevator_next_req_fn *elevator_next_req_fn; + elevator_dispatch_fn *elevator_dispatch_fn; elevator_add_req_fn *elevator_add_req_fn; - elevator_remove_req_fn *elevator_remove_req_fn; - elevator_requeue_req_fn *elevator_requeue_req_fn; + elevator_activate_req_fn *elevator_activate_req_fn; elevator_deactivate_req_fn *elevator_deactivate_req_fn; elevator_queue_empty_fn *elevator_queue_empty_fn; @@ -81,15 +79,15 @@ struct elevator_queue /* * block elevator interface */ +extern void elv_dispatch_insert(request_queue_t *, struct request *, int); extern void elv_add_request(request_queue_t *, struct request *, int, int); extern void __elv_add_request(request_queue_t *, struct request *, int, int); extern int elv_merge(request_queue_t *, struct request **, struct bio *); extern void elv_merge_requests(request_queue_t *, struct request *, struct request *); extern void elv_merged_request(request_queue_t *, struct request *); -extern void elv_remove_request(request_queue_t *, struct request *); +extern void elv_dequeue_request(request_queue_t *, struct request *); extern void elv_requeue_request(request_queue_t *, struct request *); -extern void elv_deactivate_request(request_queue_t *, struct request *); extern int elv_queue_empty(request_queue_t *); extern struct request *elv_next_request(struct request_queue *q); extern struct request *elv_former_request(request_queue_t *, struct request *); -- GitLab From 1b47f531e244e339b648dfff071c086f936e49e1 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 20 Oct 2005 16:37:00 +0200 Subject: [PATCH 0456/1519] [PATCH] generic dispatch fixes - Split elv_dispatch_insert() into two functions - Rename rq_last_sector() to rq_end_sector() Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 33 ++++++++++++--------------------- include/linux/blkdev.h | 13 ++++++++++++- include/linux/elevator.h | 4 +++- 3 files changed, 27 insertions(+), 23 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index a27555908d35..237e43d760c8 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -40,11 +40,6 @@ static DEFINE_SPINLOCK(elv_list_lock); static LIST_HEAD(elv_list); -static inline sector_t rq_last_sector(struct request *rq) -{ - return rq->sector + rq->nr_sectors; -} - /* * can we safely merge with this request? */ @@ -148,7 +143,7 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e, INIT_LIST_HEAD(&q->queue_head); q->last_merge = NULL; q->elevator = eq; - q->last_sector = 0; + q->end_sector = 0; q->boundary_rq = NULL; q->max_back_kb = 0; @@ -233,29 +228,25 @@ void elevator_exit(elevator_t *e) kfree(e); } +void elv_dispatch_insert_tail(request_queue_t *q, struct request *rq) +{ +} + /* * Insert rq into dispatch queue of q. Queue lock must be held on * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be * appended to the dispatch queue. To be used by specific elevators. */ -void elv_dispatch_insert(request_queue_t *q, struct request *rq, int sort) +void elv_dispatch_sort(request_queue_t *q, struct request *rq) { sector_t boundary; unsigned max_back; struct list_head *entry; - if (!sort) { - /* Specific elevator is performing sort. Step away. */ - q->last_sector = rq_last_sector(rq); - q->boundary_rq = rq; - list_add_tail(&rq->queuelist, &q->queue_head); - return; - } - - boundary = q->last_sector; + boundary = q->end_sector; max_back = q->max_back_kb * 2; boundary = boundary > max_back ? boundary - max_back : 0; - + list_for_each_prev(entry, &q->queue_head) { struct request *pos = list_entry_rq(entry); @@ -343,10 +334,10 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, where = ELEVATOR_INSERT_BACK; /* - * this request is scheduling boundary, update last_sector + * this request is scheduling boundary, update end_sector */ if (blk_fs_request(rq)) { - q->last_sector = rq_last_sector(rq); + q->end_sector = rq_end_sector(rq); q->boundary_rq = rq; } } @@ -479,7 +470,7 @@ struct request *elv_next_request(request_queue_t *q) q->last_merge = NULL; if (!q->boundary_rq || q->boundary_rq == rq) { - q->last_sector = rq_last_sector(rq); + q->end_sector = rq_end_sector(rq); q->boundary_rq = NULL; } @@ -802,7 +793,7 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name) return len; } -EXPORT_SYMBOL(elv_dispatch_insert); +EXPORT_SYMBOL(elv_dispatch_sort); EXPORT_SYMBOL(elv_add_request); EXPORT_SYMBOL(__elv_add_request); EXPORT_SYMBOL(elv_requeue_request); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2c7b9154927a..a2e496f285a4 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -337,7 +337,7 @@ struct request_queue /* * Dispatch queue sorting */ - sector_t last_sector; + sector_t end_sector; struct request *boundary_rq; unsigned int max_back_kb; @@ -624,6 +624,17 @@ static inline void blkdev_dequeue_request(struct request *req) elv_dequeue_request(req->q, req); } +/* + * This should be in elevator.h, but that requires pulling in rq and q + */ +static inline void elv_dispatch_add_tail(struct request_queue *q, + struct request *rq) +{ + q->end_sector = rq_end_sector(rq); + q->boundary_rq = rq; + list_add_tail(&rq->queuelist, &q->queue_head); +} + /* * Access functions for manipulating queue properties */ diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 76f4f6920744..f9b5ec38121a 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -79,7 +79,7 @@ struct elevator_queue /* * block elevator interface */ -extern void elv_dispatch_insert(request_queue_t *, struct request *, int); +extern void elv_dispatch_sort(request_queue_t *, struct request *); extern void elv_add_request(request_queue_t *, struct request *, int, int); extern void __elv_add_request(request_queue_t *, struct request *, int, int); extern int elv_merge(request_queue_t *, struct request **, struct bio *); @@ -140,4 +140,6 @@ enum { ELV_MQUEUE_MUST, }; +#define rq_end_sector(rq) ((rq)->sector + (rq)->nr_sectors) + #endif -- GitLab From d9ebb192aa13a026edc6faff137dcb14f2c91731 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 20 Oct 2005 16:37:38 +0200 Subject: [PATCH 0457/1519] [PATCH] elevator: leftover function declaration Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 237e43d760c8..29d6c8237ab3 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -228,10 +228,6 @@ void elevator_exit(elevator_t *e) kfree(e); } -void elv_dispatch_insert_tail(request_queue_t *q, struct request *rq) -{ -} - /* * Insert rq into dispatch queue of q. Queue lock must be held on * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be -- GitLab From b4878f245ec8e168cdd1f170f823a750b7dd4af5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 20 Oct 2005 16:42:29 +0200 Subject: [PATCH 0458/1519] [PATCH] 02/05: update ioscheds to use generic dispatch queue This patch updates all four ioscheds to use generic dispatch queue. There's one behavior change in as-iosched. * In as-iosched, when force dispatching (ELEVATOR_INSERT_BACK), batch_data_dir is reset to REQ_SYNC and changed_batch and new_batch are cleared to zero. This prevernts AS from doing incorrect update_write_batch after the forced dispatched requests are finished. * In cfq-iosched, cfqd->rq_in_driver currently counts the number of activated (removed) requests to determine whether queue-kicking is needed and cfq_max_depth has been reached. With generic dispatch queue, I think counting the number of dispatched requests would be more appropriate. * cfq_max_depth can be lowered to 1 again. Original from Tejun Heo, modified version applied. Signed-off-by: Jens Axboe --- drivers/block/as-iosched.c | 290 ++++++++------------------ drivers/block/cfq-iosched.c | 340 ++++++++----------------------- drivers/block/deadline-iosched.c | 95 ++------- drivers/block/noop-iosched.c | 17 +- 4 files changed, 187 insertions(+), 555 deletions(-) diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c index 95c0a3690b0f..1775ffe9edc7 100644 --- a/drivers/block/as-iosched.c +++ b/drivers/block/as-iosched.c @@ -98,7 +98,6 @@ struct as_data { struct as_rq *next_arq[2]; /* next in sort order */ sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */ - struct list_head *dispatch; /* driver dispatch queue */ struct list_head *hash; /* request hash */ unsigned long exit_prob; /* probability a task will exit while @@ -239,6 +238,25 @@ static struct io_context *as_get_io_context(void) return ioc; } +static void as_put_io_context(struct as_rq *arq) +{ + struct as_io_context *aic; + + if (unlikely(!arq->io_context)) + return; + + aic = arq->io_context->aic; + + if (arq->is_sync == REQ_SYNC && aic) { + spin_lock(&aic->lock); + set_bit(AS_TASK_IORUNNING, &aic->state); + aic->last_end_request = jiffies; + spin_unlock(&aic->lock); + } + + put_io_context(arq->io_context); +} + /* * the back merge hash support functions */ @@ -950,23 +968,12 @@ static void as_completed_request(request_queue_t *q, struct request *rq) WARN_ON(!list_empty(&rq->queuelist)); - if (arq->state == AS_RQ_PRESCHED) { - WARN_ON(arq->io_context); - goto out; - } - - if (arq->state == AS_RQ_MERGED) - goto out_ioc; - if (arq->state != AS_RQ_REMOVED) { printk("arq->state %d\n", arq->state); WARN_ON(1); goto out; } - if (!blk_fs_request(rq)) - goto out; - if (ad->changed_batch && ad->nr_dispatched == 1) { kblockd_schedule_work(&ad->antic_work); ad->changed_batch = 0; @@ -1001,21 +1008,7 @@ static void as_completed_request(request_queue_t *q, struct request *rq) } } -out_ioc: - if (!arq->io_context) - goto out; - - if (arq->is_sync == REQ_SYNC) { - struct as_io_context *aic = arq->io_context->aic; - if (aic) { - spin_lock(&aic->lock); - set_bit(AS_TASK_IORUNNING, &aic->state); - aic->last_end_request = jiffies; - spin_unlock(&aic->lock); - } - } - - put_io_context(arq->io_context); + as_put_io_context(arq); out: arq->state = AS_RQ_POSTSCHED; } @@ -1051,68 +1044,6 @@ static void as_remove_queued_request(request_queue_t *q, struct request *rq) as_del_arq_rb(ad, arq); } -/* - * as_remove_dispatched_request is called to remove a request which has gone - * to the dispatch list. - */ -static void as_remove_dispatched_request(request_queue_t *q, struct request *rq) -{ - struct as_rq *arq = RQ_DATA(rq); - struct as_io_context *aic; - - if (!arq) { - WARN_ON(1); - return; - } - - WARN_ON(arq->state != AS_RQ_DISPATCHED); - WARN_ON(ON_RB(&arq->rb_node)); - if (arq->io_context && arq->io_context->aic) { - aic = arq->io_context->aic; - if (aic) { - WARN_ON(!atomic_read(&aic->nr_dispatched)); - atomic_dec(&aic->nr_dispatched); - } - } -} - -/* - * as_remove_request is called when a driver has finished with a request. - * This should be only called for dispatched requests, but for some reason - * a POWER4 box running hwscan it does not. - */ -static void as_remove_request(request_queue_t *q, struct request *rq) -{ - struct as_rq *arq = RQ_DATA(rq); - - if (unlikely(arq->state == AS_RQ_NEW)) - goto out; - - if (ON_RB(&arq->rb_node)) { - if (arq->state != AS_RQ_QUEUED) { - printk("arq->state %d\n", arq->state); - WARN_ON(1); - goto out; - } - /* - * We'll lose the aliased request(s) here. I don't think this - * will ever happen, but if it does, hopefully someone will - * report it. - */ - WARN_ON(!list_empty(&rq->queuelist)); - as_remove_queued_request(q, rq); - } else { - if (arq->state != AS_RQ_DISPATCHED) { - printk("arq->state %d\n", arq->state); - WARN_ON(1); - goto out; - } - as_remove_dispatched_request(q, rq); - } -out: - arq->state = AS_RQ_REMOVED; -} - /* * as_fifo_expired returns 0 if there are no expired reads on the fifo, * 1 otherwise. It is ratelimited so that we only perform the check once per @@ -1165,7 +1096,6 @@ static inline int as_batch_expired(struct as_data *ad) static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq) { struct request *rq = arq->request; - struct list_head *insert; const int data_dir = arq->is_sync; BUG_ON(!ON_RB(&arq->rb_node)); @@ -1198,13 +1128,13 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq) /* * take it off the sort and fifo list, add to dispatch queue */ - insert = ad->dispatch->prev; - while (!list_empty(&rq->queuelist)) { struct request *__rq = list_entry_rq(rq->queuelist.next); struct as_rq *__arq = RQ_DATA(__rq); - list_move_tail(&__rq->queuelist, ad->dispatch); + list_del(&__rq->queuelist); + + elv_dispatch_add_tail(ad->q, __rq); if (__arq->io_context && __arq->io_context->aic) atomic_inc(&__arq->io_context->aic->nr_dispatched); @@ -1218,7 +1148,8 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq) as_remove_queued_request(ad->q, rq); WARN_ON(arq->state != AS_RQ_QUEUED); - list_add(&rq->queuelist, insert); + elv_dispatch_sort(ad->q, rq); + arq->state = AS_RQ_DISPATCHED; if (arq->io_context && arq->io_context->aic) atomic_inc(&arq->io_context->aic->nr_dispatched); @@ -1230,12 +1161,42 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq) * read/write expire, batch expire, etc, and moves it to the dispatch * queue. Returns 1 if a request was found, 0 otherwise. */ -static int as_dispatch_request(struct as_data *ad) +static int as_dispatch_request(request_queue_t *q, int force) { + struct as_data *ad = q->elevator->elevator_data; struct as_rq *arq; const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]); const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]); + if (unlikely(force)) { + /* + * Forced dispatch, accounting is useless. Reset + * accounting states and dump fifo_lists. Note that + * batch_data_dir is reset to REQ_SYNC to avoid + * screwing write batch accounting as write batch + * accounting occurs on W->R transition. + */ + int dispatched = 0; + + ad->batch_data_dir = REQ_SYNC; + ad->changed_batch = 0; + ad->new_batch = 0; + + while (ad->next_arq[REQ_SYNC]) { + as_move_to_dispatch(ad, ad->next_arq[REQ_SYNC]); + dispatched++; + } + ad->last_check_fifo[REQ_SYNC] = jiffies; + + while (ad->next_arq[REQ_ASYNC]) { + as_move_to_dispatch(ad, ad->next_arq[REQ_ASYNC]); + dispatched++; + } + ad->last_check_fifo[REQ_ASYNC] = jiffies; + + return dispatched; + } + /* Signal that the write batch was uncontended, so we can't time it */ if (ad->batch_data_dir == REQ_ASYNC && !reads) { if (ad->current_write_count == 0 || !writes) @@ -1359,20 +1320,6 @@ static int as_dispatch_request(struct as_data *ad) return 1; } -static struct request *as_next_request(request_queue_t *q) -{ - struct as_data *ad = q->elevator->elevator_data; - struct request *rq = NULL; - - /* - * if there are still requests on the dispatch queue, grab the first - */ - if (!list_empty(ad->dispatch) || as_dispatch_request(ad)) - rq = list_entry_rq(ad->dispatch->next); - - return rq; -} - /* * Add arq to a list behind alias */ @@ -1410,11 +1357,19 @@ as_add_aliased_request(struct as_data *ad, struct as_rq *arq, struct as_rq *alia /* * add arq to rbtree and fifo */ -static void as_add_request(struct as_data *ad, struct as_rq *arq) +static void as_add_request(request_queue_t *q, struct request *rq) { + struct as_data *ad = q->elevator->elevator_data; + struct as_rq *arq = RQ_DATA(rq); struct as_rq *alias; int data_dir; + if (arq->state != AS_RQ_PRESCHED) { + printk("arq->state: %d\n", arq->state); + WARN_ON(1); + } + arq->state = AS_RQ_NEW; + if (rq_data_dir(arq->request) == READ || current->flags&PF_SYNCWRITE) arq->is_sync = 1; @@ -1463,96 +1418,24 @@ static void as_add_request(struct as_data *ad, struct as_rq *arq) arq->state = AS_RQ_QUEUED; } -static void as_deactivate_request(request_queue_t *q, struct request *rq) +static void as_activate_request(request_queue_t *q, struct request *rq) { - struct as_data *ad = q->elevator->elevator_data; struct as_rq *arq = RQ_DATA(rq); - if (arq) { - if (arq->state == AS_RQ_REMOVED) { - arq->state = AS_RQ_DISPATCHED; - if (arq->io_context && arq->io_context->aic) - atomic_inc(&arq->io_context->aic->nr_dispatched); - } - } else - WARN_ON(blk_fs_request(rq) - && (!(rq->flags & (REQ_HARDBARRIER|REQ_SOFTBARRIER))) ); - - /* Stop anticipating - let this request get through */ - as_antic_stop(ad); -} - -/* - * requeue the request. The request has not been completed, nor is it a - * new request, so don't touch accounting. - */ -static void as_requeue_request(request_queue_t *q, struct request *rq) -{ - as_deactivate_request(q, rq); - list_add(&rq->queuelist, &q->queue_head); -} - -/* - * Account a request that is inserted directly onto the dispatch queue. - * arq->io_context->aic->nr_dispatched should not need to be incremented - * because only new requests should come through here: requeues go through - * our explicit requeue handler. - */ -static void as_account_queued_request(struct as_data *ad, struct request *rq) -{ - if (blk_fs_request(rq)) { - struct as_rq *arq = RQ_DATA(rq); - arq->state = AS_RQ_DISPATCHED; - ad->nr_dispatched++; - } + WARN_ON(arq->state != AS_RQ_DISPATCHED); + arq->state = AS_RQ_REMOVED; + if (arq->io_context && arq->io_context->aic) + atomic_dec(&arq->io_context->aic->nr_dispatched); } -static void -as_insert_request(request_queue_t *q, struct request *rq, int where) +static void as_deactivate_request(request_queue_t *q, struct request *rq) { - struct as_data *ad = q->elevator->elevator_data; struct as_rq *arq = RQ_DATA(rq); - if (arq) { - if (arq->state != AS_RQ_PRESCHED) { - printk("arq->state: %d\n", arq->state); - WARN_ON(1); - } - arq->state = AS_RQ_NEW; - } - - /* barriers must flush the reorder queue */ - if (unlikely(rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER) - && where == ELEVATOR_INSERT_SORT)) { - WARN_ON(1); - where = ELEVATOR_INSERT_BACK; - } - - switch (where) { - case ELEVATOR_INSERT_BACK: - while (ad->next_arq[REQ_SYNC]) - as_move_to_dispatch(ad, ad->next_arq[REQ_SYNC]); - - while (ad->next_arq[REQ_ASYNC]) - as_move_to_dispatch(ad, ad->next_arq[REQ_ASYNC]); - - list_add_tail(&rq->queuelist, ad->dispatch); - as_account_queued_request(ad, rq); - as_antic_stop(ad); - break; - case ELEVATOR_INSERT_FRONT: - list_add(&rq->queuelist, ad->dispatch); - as_account_queued_request(ad, rq); - as_antic_stop(ad); - break; - case ELEVATOR_INSERT_SORT: - BUG_ON(!blk_fs_request(rq)); - as_add_request(ad, arq); - break; - default: - BUG(); - return; - } + WARN_ON(arq->state != AS_RQ_REMOVED); + arq->state = AS_RQ_DISPATCHED; + if (arq->io_context && arq->io_context->aic) + atomic_inc(&arq->io_context->aic->nr_dispatched); } /* @@ -1565,12 +1448,8 @@ static int as_queue_empty(request_queue_t *q) { struct as_data *ad = q->elevator->elevator_data; - if (!list_empty(&ad->fifo_list[REQ_ASYNC]) - || !list_empty(&ad->fifo_list[REQ_SYNC]) - || !list_empty(ad->dispatch)) - return 0; - - return 1; + return list_empty(&ad->fifo_list[REQ_ASYNC]) + && list_empty(&ad->fifo_list[REQ_SYNC]); } static struct request * @@ -1763,6 +1642,7 @@ as_merged_requests(request_queue_t *q, struct request *req, * kill knowledge of next, this one is a goner */ as_remove_queued_request(q, next); + as_put_io_context(anext); anext->state = AS_RQ_MERGED; } @@ -1782,7 +1662,7 @@ static void as_work_handler(void *data) unsigned long flags; spin_lock_irqsave(q->queue_lock, flags); - if (as_next_request(q)) + if (!as_queue_empty(q)) q->request_fn(q); spin_unlock_irqrestore(q->queue_lock, flags); } @@ -1797,7 +1677,9 @@ static void as_put_request(request_queue_t *q, struct request *rq) return; } - if (arq->state != AS_RQ_POSTSCHED && arq->state != AS_RQ_PRESCHED) { + if (unlikely(arq->state != AS_RQ_POSTSCHED && + arq->state != AS_RQ_PRESCHED && + arq->state != AS_RQ_MERGED)) { printk("arq->state %d\n", arq->state); WARN_ON(1); } @@ -1907,7 +1789,6 @@ static int as_init_queue(request_queue_t *q, elevator_t *e) INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]); ad->sort_list[REQ_SYNC] = RB_ROOT; ad->sort_list[REQ_ASYNC] = RB_ROOT; - ad->dispatch = &q->queue_head; ad->fifo_expire[REQ_SYNC] = default_read_expire; ad->fifo_expire[REQ_ASYNC] = default_write_expire; ad->antic_expire = default_antic_expire; @@ -2072,10 +1953,9 @@ static struct elevator_type iosched_as = { .elevator_merge_fn = as_merge, .elevator_merged_fn = as_merged_request, .elevator_merge_req_fn = as_merged_requests, - .elevator_next_req_fn = as_next_request, - .elevator_add_req_fn = as_insert_request, - .elevator_remove_req_fn = as_remove_request, - .elevator_requeue_req_fn = as_requeue_request, + .elevator_dispatch_fn = as_dispatch_request, + .elevator_add_req_fn = as_add_request, + .elevator_activate_req_fn = as_activate_request, .elevator_deactivate_req_fn = as_deactivate_request, .elevator_queue_empty_fn = as_queue_empty, .elevator_completed_req_fn = as_completed_request, diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index cd056e7e64ec..7b14160e0798 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -84,7 +84,6 @@ static int cfq_max_depth = 2; (node)->rb_left = NULL; \ } while (0) #define RB_CLEAR_ROOT(root) ((root)->rb_node = NULL) -#define ON_RB(node) ((node)->rb_color != RB_NONE) #define rb_entry_crq(node) rb_entry((node), struct cfq_rq, rb_node) #define rq_rb_key(rq) (rq)->sector @@ -271,10 +270,7 @@ CFQ_CFQQ_FNS(expired); #undef CFQ_CFQQ_FNS enum cfq_rq_state_flags { - CFQ_CRQ_FLAG_in_flight = 0, - CFQ_CRQ_FLAG_in_driver, - CFQ_CRQ_FLAG_is_sync, - CFQ_CRQ_FLAG_requeued, + CFQ_CRQ_FLAG_is_sync = 0, }; #define CFQ_CRQ_FNS(name) \ @@ -291,14 +287,11 @@ static inline int cfq_crq_##name(const struct cfq_rq *crq) \ return (crq->crq_flags & (1 << CFQ_CRQ_FLAG_##name)) != 0; \ } -CFQ_CRQ_FNS(in_flight); -CFQ_CRQ_FNS(in_driver); CFQ_CRQ_FNS(is_sync); -CFQ_CRQ_FNS(requeued); #undef CFQ_CRQ_FNS static struct cfq_queue *cfq_find_cfq_hash(struct cfq_data *, unsigned int, unsigned short); -static void cfq_dispatch_sort(request_queue_t *, struct cfq_rq *); +static void cfq_dispatch_insert(request_queue_t *, struct cfq_rq *); static void cfq_put_cfqd(struct cfq_data *cfqd); #define process_sync(tsk) ((tsk)->flags & PF_SYNCWRITE) @@ -347,18 +340,13 @@ static struct request *cfq_find_rq_hash(struct cfq_data *cfqd, sector_t offset) return NULL; } -static inline int cfq_pending_requests(struct cfq_data *cfqd) -{ - return !list_empty(&cfqd->queue->queue_head) || cfqd->busy_queues; -} - /* * scheduler run of queue, if there are requests pending and no one in the * driver that will restart queueing */ static inline void cfq_schedule_dispatch(struct cfq_data *cfqd) { - if (!cfqd->rq_in_driver && cfq_pending_requests(cfqd)) + if (!cfqd->rq_in_driver && cfqd->busy_queues) kblockd_schedule_work(&cfqd->unplug_work); } @@ -366,7 +354,7 @@ static int cfq_queue_empty(request_queue_t *q) { struct cfq_data *cfqd = q->elevator->elevator_data; - return !cfq_pending_requests(cfqd); + return !cfqd->busy_queues; } /* @@ -386,11 +374,6 @@ cfq_choose_req(struct cfq_data *cfqd, struct cfq_rq *crq1, struct cfq_rq *crq2) if (crq2 == NULL) return crq1; - if (cfq_crq_requeued(crq1) && !cfq_crq_requeued(crq2)) - return crq1; - else if (cfq_crq_requeued(crq2) && !cfq_crq_requeued(crq1)) - return crq2; - if (cfq_crq_is_sync(crq1) && !cfq_crq_is_sync(crq2)) return crq1; else if (cfq_crq_is_sync(crq2) && !cfq_crq_is_sync(crq1)) @@ -461,10 +444,7 @@ cfq_find_next_crq(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct cfq_rq *crq_next = NULL, *crq_prev = NULL; struct rb_node *rbnext, *rbprev; - rbnext = NULL; - if (ON_RB(&last->rb_node)) - rbnext = rb_next(&last->rb_node); - if (!rbnext) { + if (!(rbnext = rb_next(&last->rb_node))) { rbnext = rb_first(&cfqq->sort_list); if (rbnext == &last->rb_node) rbnext = NULL; @@ -545,13 +525,13 @@ static void cfq_resort_rr_list(struct cfq_queue *cfqq, int preempted) * the pending list according to last request service */ static inline void -cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq, int requeue) +cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) { BUG_ON(cfq_cfqq_on_rr(cfqq)); cfq_mark_cfqq_on_rr(cfqq); cfqd->busy_queues++; - cfq_resort_rr_list(cfqq, requeue); + cfq_resort_rr_list(cfqq, 0); } static inline void @@ -571,22 +551,19 @@ cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) static inline void cfq_del_crq_rb(struct cfq_rq *crq) { struct cfq_queue *cfqq = crq->cfq_queue; + struct cfq_data *cfqd = cfqq->cfqd; + const int sync = cfq_crq_is_sync(crq); - if (ON_RB(&crq->rb_node)) { - struct cfq_data *cfqd = cfqq->cfqd; - const int sync = cfq_crq_is_sync(crq); - - BUG_ON(!cfqq->queued[sync]); - cfqq->queued[sync]--; + BUG_ON(!cfqq->queued[sync]); + cfqq->queued[sync]--; - cfq_update_next_crq(crq); + cfq_update_next_crq(crq); - rb_erase(&crq->rb_node, &cfqq->sort_list); - RB_CLEAR_COLOR(&crq->rb_node); + rb_erase(&crq->rb_node, &cfqq->sort_list); + RB_CLEAR_COLOR(&crq->rb_node); - if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY(&cfqq->sort_list)) - cfq_del_cfqq_rr(cfqd, cfqq); - } + if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY(&cfqq->sort_list)) + cfq_del_cfqq_rr(cfqd, cfqq); } static struct cfq_rq * @@ -627,12 +604,12 @@ static void cfq_add_crq_rb(struct cfq_rq *crq) * if that happens, put the alias on the dispatch list */ while ((__alias = __cfq_add_crq_rb(crq)) != NULL) - cfq_dispatch_sort(cfqd->queue, __alias); + cfq_dispatch_insert(cfqd->queue, __alias); rb_insert_color(&crq->rb_node, &cfqq->sort_list); if (!cfq_cfqq_on_rr(cfqq)) - cfq_add_cfqq_rr(cfqd, cfqq, cfq_crq_requeued(crq)); + cfq_add_cfqq_rr(cfqd, cfqq); /* * check if this request is a better next-serve candidate @@ -643,10 +620,8 @@ static void cfq_add_crq_rb(struct cfq_rq *crq) static inline void cfq_reposition_crq_rb(struct cfq_queue *cfqq, struct cfq_rq *crq) { - if (ON_RB(&crq->rb_node)) { - rb_erase(&crq->rb_node, &cfqq->sort_list); - cfqq->queued[cfq_crq_is_sync(crq)]--; - } + rb_erase(&crq->rb_node, &cfqq->sort_list); + cfqq->queued[cfq_crq_is_sync(crq)]--; cfq_add_crq_rb(crq); } @@ -676,49 +651,28 @@ static struct request *cfq_find_rq_rb(struct cfq_data *cfqd, sector_t sector) return NULL; } -static void cfq_deactivate_request(request_queue_t *q, struct request *rq) +static void cfq_activate_request(request_queue_t *q, struct request *rq) { struct cfq_data *cfqd = q->elevator->elevator_data; - struct cfq_rq *crq = RQ_DATA(rq); - - if (crq) { - struct cfq_queue *cfqq = crq->cfq_queue; - if (cfq_crq_in_driver(crq)) { - cfq_clear_crq_in_driver(crq); - WARN_ON(!cfqd->rq_in_driver); - cfqd->rq_in_driver--; - } - if (cfq_crq_in_flight(crq)) { - const int sync = cfq_crq_is_sync(crq); - - cfq_clear_crq_in_flight(crq); - WARN_ON(!cfqq->on_dispatch[sync]); - cfqq->on_dispatch[sync]--; - } - cfq_mark_crq_requeued(crq); - } + cfqd->rq_in_driver++; } -/* - * make sure the service time gets corrected on reissue of this request - */ -static void cfq_requeue_request(request_queue_t *q, struct request *rq) +static void cfq_deactivate_request(request_queue_t *q, struct request *rq) { - cfq_deactivate_request(q, rq); - list_add(&rq->queuelist, &q->queue_head); + struct cfq_data *cfqd = q->elevator->elevator_data; + + WARN_ON(!cfqd->rq_in_driver); + cfqd->rq_in_driver--; } -static void cfq_remove_request(request_queue_t *q, struct request *rq) +static void cfq_remove_request(struct request *rq) { struct cfq_rq *crq = RQ_DATA(rq); - if (crq) { - list_del_init(&rq->queuelist); - cfq_del_crq_rb(crq); - cfq_remove_merge_hints(q, crq); - - } + list_del_init(&rq->queuelist); + cfq_del_crq_rb(crq); + cfq_remove_merge_hints(rq->q, crq); } static int @@ -762,7 +716,7 @@ static void cfq_merged_request(request_queue_t *q, struct request *req) cfq_del_crq_hash(crq); cfq_add_crq_hash(cfqd, crq); - if (ON_RB(&crq->rb_node) && (rq_rb_key(req) != crq->rb_key)) { + if (rq_rb_key(req) != crq->rb_key) { struct cfq_queue *cfqq = crq->cfq_queue; cfq_update_next_crq(crq); @@ -785,7 +739,7 @@ cfq_merged_requests(request_queue_t *q, struct request *rq, time_before(next->start_time, rq->start_time)) list_move(&rq->queuelist, &next->queuelist); - cfq_remove_request(q, next); + cfq_remove_request(next); } static inline void @@ -992,53 +946,15 @@ static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq) return 1; } -/* - * we dispatch cfqd->cfq_quantum requests in total from the rr_list queues, - * this function sector sorts the selected request to minimize seeks. we start - * at cfqd->last_sector, not 0. - */ -static void cfq_dispatch_sort(request_queue_t *q, struct cfq_rq *crq) +static void cfq_dispatch_insert(request_queue_t *q, struct cfq_rq *crq) { struct cfq_data *cfqd = q->elevator->elevator_data; struct cfq_queue *cfqq = crq->cfq_queue; - struct list_head *head = &q->queue_head, *entry = head; - struct request *__rq; - sector_t last; - - list_del(&crq->request->queuelist); - - last = cfqd->last_sector; - list_for_each_entry_reverse(__rq, head, queuelist) { - struct cfq_rq *__crq = RQ_DATA(__rq); - - if (blk_barrier_rq(__rq)) - break; - if (!blk_fs_request(__rq)) - break; - if (cfq_crq_requeued(__crq)) - break; - - if (__rq->sector <= crq->request->sector) - break; - if (__rq->sector > last && crq->request->sector < last) { - last = crq->request->sector + crq->request->nr_sectors; - break; - } - entry = &__rq->queuelist; - } - - cfqd->last_sector = last; cfqq->next_crq = cfq_find_next_crq(cfqd, cfqq, crq); - - cfq_del_crq_rb(crq); - cfq_remove_merge_hints(q, crq); - - cfq_mark_crq_in_flight(crq); - cfq_clear_crq_requeued(crq); - + cfq_remove_request(crq->request); cfqq->on_dispatch[cfq_crq_is_sync(crq)]++; - list_add_tail(&crq->request->queuelist, entry); + elv_dispatch_sort(q, crq->request); } /* @@ -1159,7 +1075,7 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq, /* * finally, insert request into driver dispatch list */ - cfq_dispatch_sort(cfqd->queue, crq); + cfq_dispatch_insert(cfqd->queue, crq); cfqd->dispatch_slice++; dispatched++; @@ -1194,7 +1110,7 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq, } static int -cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force) +cfq_dispatch_requests(request_queue_t *q, int force) { struct cfq_data *cfqd = q->elevator->elevator_data; struct cfq_queue *cfqq; @@ -1204,12 +1120,25 @@ cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force) cfqq = cfq_select_queue(cfqd, force); if (cfqq) { + int max_dispatch; + + /* + * if idle window is disabled, allow queue buildup + */ + if (!cfq_cfqq_idle_window(cfqq) && + cfqd->rq_in_driver >= cfqd->cfq_max_depth) + return 0; + cfq_clear_cfqq_must_dispatch(cfqq); cfq_clear_cfqq_wait_request(cfqq); del_timer(&cfqd->idle_slice_timer); - if (cfq_class_idle(cfqq)) - max_dispatch = 1; + if (!force) { + max_dispatch = cfqd->cfq_quantum; + if (cfq_class_idle(cfqq)) + max_dispatch = 1; + } else + max_dispatch = INT_MAX; return __cfq_dispatch_requests(cfqd, cfqq, max_dispatch); } @@ -1217,93 +1146,6 @@ cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force) return 0; } -static inline void cfq_account_dispatch(struct cfq_rq *crq) -{ - struct cfq_queue *cfqq = crq->cfq_queue; - struct cfq_data *cfqd = cfqq->cfqd; - - if (unlikely(!blk_fs_request(crq->request))) - return; - - /* - * accounted bit is necessary since some drivers will call - * elv_next_request() many times for the same request (eg ide) - */ - if (cfq_crq_in_driver(crq)) - return; - - cfq_mark_crq_in_driver(crq); - cfqd->rq_in_driver++; -} - -static inline void -cfq_account_completion(struct cfq_queue *cfqq, struct cfq_rq *crq) -{ - struct cfq_data *cfqd = cfqq->cfqd; - unsigned long now; - - if (!cfq_crq_in_driver(crq)) - return; - - now = jiffies; - - WARN_ON(!cfqd->rq_in_driver); - cfqd->rq_in_driver--; - - if (!cfq_class_idle(cfqq)) - cfqd->last_end_request = now; - - if (!cfq_cfqq_dispatched(cfqq)) { - if (cfq_cfqq_on_rr(cfqq)) { - cfqq->service_last = now; - cfq_resort_rr_list(cfqq, 0); - } - if (cfq_cfqq_expired(cfqq)) { - __cfq_slice_expired(cfqd, cfqq, 0); - cfq_schedule_dispatch(cfqd); - } - } - - if (cfq_crq_is_sync(crq)) - crq->io_context->last_end_request = now; -} - -static struct request *cfq_next_request(request_queue_t *q) -{ - struct cfq_data *cfqd = q->elevator->elevator_data; - struct request *rq; - - if (!list_empty(&q->queue_head)) { - struct cfq_rq *crq; -dispatch: - rq = list_entry_rq(q->queue_head.next); - - crq = RQ_DATA(rq); - if (crq) { - struct cfq_queue *cfqq = crq->cfq_queue; - - /* - * if idle window is disabled, allow queue buildup - */ - if (!cfq_crq_in_driver(crq) && - !cfq_cfqq_idle_window(cfqq) && - !blk_barrier_rq(rq) && - cfqd->rq_in_driver >= cfqd->cfq_max_depth) - return NULL; - - cfq_remove_merge_hints(q, crq); - cfq_account_dispatch(crq); - } - - return rq; - } - - if (cfq_dispatch_requests(q, cfqd->cfq_quantum, 0)) - goto dispatch; - - return NULL; -} - /* * task holds one reference to the queue, dropped when task exits. each crq * in-flight on this queue also holds a reference, dropped when crq is freed. @@ -1816,8 +1658,9 @@ cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, } } -static void cfq_enqueue(struct cfq_data *cfqd, struct request *rq) +static void cfq_insert_request(request_queue_t *q, struct request *rq) { + struct cfq_data *cfqd = q->elevator->elevator_data; struct cfq_rq *crq = RQ_DATA(rq); struct cfq_queue *cfqq = crq->cfq_queue; @@ -1837,56 +1680,37 @@ static void cfq_enqueue(struct cfq_data *cfqd, struct request *rq) cfq_crq_enqueued(cfqd, cfqq, crq); } -static void -cfq_insert_request(request_queue_t *q, struct request *rq, int where) -{ - struct cfq_data *cfqd = q->elevator->elevator_data; - - switch (where) { - case ELEVATOR_INSERT_BACK: - while (cfq_dispatch_requests(q, INT_MAX, 1)) - ; - list_add_tail(&rq->queuelist, &q->queue_head); - /* - * If we were idling with pending requests on - * inactive cfqqs, force dispatching will - * remove the idle timer and the queue won't - * be kicked by __make_request() afterward. - * Kick it here. - */ - cfq_schedule_dispatch(cfqd); - break; - case ELEVATOR_INSERT_FRONT: - list_add(&rq->queuelist, &q->queue_head); - break; - case ELEVATOR_INSERT_SORT: - BUG_ON(!blk_fs_request(rq)); - cfq_enqueue(cfqd, rq); - break; - default: - printk("%s: bad insert point %d\n", __FUNCTION__,where); - return; - } -} - static void cfq_completed_request(request_queue_t *q, struct request *rq) { struct cfq_rq *crq = RQ_DATA(rq); - struct cfq_queue *cfqq; + struct cfq_queue *cfqq = crq->cfq_queue; + struct cfq_data *cfqd = cfqq->cfqd; + const int sync = cfq_crq_is_sync(crq); + unsigned long now; - if (unlikely(!blk_fs_request(rq))) - return; + now = jiffies; - cfqq = crq->cfq_queue; + WARN_ON(!cfqd->rq_in_driver); + WARN_ON(!cfqq->on_dispatch[sync]); + cfqd->rq_in_driver--; + cfqq->on_dispatch[sync]--; - if (cfq_crq_in_flight(crq)) { - const int sync = cfq_crq_is_sync(crq); + if (!cfq_class_idle(cfqq)) + cfqd->last_end_request = now; - WARN_ON(!cfqq->on_dispatch[sync]); - cfqq->on_dispatch[sync]--; + if (!cfq_cfqq_dispatched(cfqq)) { + if (cfq_cfqq_on_rr(cfqq)) { + cfqq->service_last = now; + cfq_resort_rr_list(cfqq, 0); + } + if (cfq_cfqq_expired(cfqq)) { + __cfq_slice_expired(cfqd, cfqq, 0); + cfq_schedule_dispatch(cfqd); + } } - cfq_account_completion(cfqq, crq); + if (cfq_crq_is_sync(crq)) + crq->io_context->last_end_request = now; } static struct request * @@ -2118,9 +1942,6 @@ cfq_set_request(request_queue_t *q, struct request *rq, struct bio *bio, INIT_HLIST_NODE(&crq->hash); crq->cfq_queue = cfqq; crq->io_context = cic; - cfq_clear_crq_in_flight(crq); - cfq_clear_crq_in_driver(crq); - cfq_clear_crq_requeued(crq); if (rw == READ || process_sync(tsk)) cfq_mark_crq_is_sync(crq); @@ -2201,7 +2022,7 @@ static void cfq_idle_slice_timer(unsigned long data) * only expire and reinvoke request handler, if there are * other queues with pending requests */ - if (!cfq_pending_requests(cfqd)) { + if (!cfqd->busy_queues) { cfqd->idle_slice_timer.expires = min(now + cfqd->cfq_slice_idle, cfqq->slice_end); add_timer(&cfqd->idle_slice_timer); goto out_cont; @@ -2576,10 +2397,9 @@ static struct elevator_type iosched_cfq = { .elevator_merge_fn = cfq_merge, .elevator_merged_fn = cfq_merged_request, .elevator_merge_req_fn = cfq_merged_requests, - .elevator_next_req_fn = cfq_next_request, + .elevator_dispatch_fn = cfq_dispatch_requests, .elevator_add_req_fn = cfq_insert_request, - .elevator_remove_req_fn = cfq_remove_request, - .elevator_requeue_req_fn = cfq_requeue_request, + .elevator_activate_req_fn = cfq_activate_request, .elevator_deactivate_req_fn = cfq_deactivate_request, .elevator_queue_empty_fn = cfq_queue_empty, .elevator_completed_req_fn = cfq_completed_request, diff --git a/drivers/block/deadline-iosched.c b/drivers/block/deadline-iosched.c index 52a3ae5289a0..07de4d24ddba 100644 --- a/drivers/block/deadline-iosched.c +++ b/drivers/block/deadline-iosched.c @@ -50,7 +50,6 @@ struct deadline_data { * next in sort order. read, write or both are NULL */ struct deadline_rq *next_drq[2]; - struct list_head *dispatch; /* driver dispatch queue */ struct list_head *hash; /* request hash */ unsigned int batching; /* number of sequential requests made */ sector_t last_sector; /* head position */ @@ -239,10 +238,9 @@ deadline_del_drq_rb(struct deadline_data *dd, struct deadline_rq *drq) dd->next_drq[data_dir] = rb_entry_drq(rbnext); } - if (ON_RB(&drq->rb_node)) { - rb_erase(&drq->rb_node, DRQ_RB_ROOT(dd, drq)); - RB_CLEAR(&drq->rb_node); - } + BUG_ON(!ON_RB(&drq->rb_node)); + rb_erase(&drq->rb_node, DRQ_RB_ROOT(dd, drq)); + RB_CLEAR(&drq->rb_node); } static struct request * @@ -286,7 +284,7 @@ deadline_find_first_drq(struct deadline_data *dd, int data_dir) /* * add drq to rbtree and fifo */ -static inline void +static void deadline_add_request(struct request_queue *q, struct request *rq) { struct deadline_data *dd = q->elevator->elevator_data; @@ -315,14 +313,11 @@ deadline_add_request(struct request_queue *q, struct request *rq) static void deadline_remove_request(request_queue_t *q, struct request *rq) { struct deadline_rq *drq = RQ_DATA(rq); + struct deadline_data *dd = q->elevator->elevator_data; - if (drq) { - struct deadline_data *dd = q->elevator->elevator_data; - - list_del_init(&drq->fifo); - deadline_remove_merge_hints(q, drq); - deadline_del_drq_rb(dd, drq); - } + list_del_init(&drq->fifo); + deadline_remove_merge_hints(q, drq); + deadline_del_drq_rb(dd, drq); } static int @@ -452,7 +447,7 @@ deadline_move_to_dispatch(struct deadline_data *dd, struct deadline_rq *drq) request_queue_t *q = drq->request->q; deadline_remove_request(q, drq->request); - list_add_tail(&drq->request->queuelist, dd->dispatch); + elv_dispatch_add_tail(q, drq->request); } /* @@ -502,8 +497,9 @@ static inline int deadline_check_fifo(struct deadline_data *dd, int ddir) * deadline_dispatch_requests selects the best request according to * read/write expire, fifo_batch, etc */ -static int deadline_dispatch_requests(struct deadline_data *dd) +static int deadline_dispatch_requests(request_queue_t *q, int force) { + struct deadline_data *dd = q->elevator->elevator_data; const int reads = !list_empty(&dd->fifo_list[READ]); const int writes = !list_empty(&dd->fifo_list[WRITE]); struct deadline_rq *drq; @@ -597,65 +593,12 @@ static int deadline_dispatch_requests(struct deadline_data *dd) return 1; } -static struct request *deadline_next_request(request_queue_t *q) -{ - struct deadline_data *dd = q->elevator->elevator_data; - struct request *rq; - - /* - * if there are still requests on the dispatch queue, grab the first one - */ - if (!list_empty(dd->dispatch)) { -dispatch: - rq = list_entry_rq(dd->dispatch->next); - return rq; - } - - if (deadline_dispatch_requests(dd)) - goto dispatch; - - return NULL; -} - -static void -deadline_insert_request(request_queue_t *q, struct request *rq, int where) -{ - struct deadline_data *dd = q->elevator->elevator_data; - - /* barriers must flush the reorder queue */ - if (unlikely(rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER) - && where == ELEVATOR_INSERT_SORT)) - where = ELEVATOR_INSERT_BACK; - - switch (where) { - case ELEVATOR_INSERT_BACK: - while (deadline_dispatch_requests(dd)) - ; - list_add_tail(&rq->queuelist, dd->dispatch); - break; - case ELEVATOR_INSERT_FRONT: - list_add(&rq->queuelist, dd->dispatch); - break; - case ELEVATOR_INSERT_SORT: - BUG_ON(!blk_fs_request(rq)); - deadline_add_request(q, rq); - break; - default: - printk("%s: bad insert point %d\n", __FUNCTION__,where); - return; - } -} - static int deadline_queue_empty(request_queue_t *q) { struct deadline_data *dd = q->elevator->elevator_data; - if (!list_empty(&dd->fifo_list[WRITE]) - || !list_empty(&dd->fifo_list[READ]) - || !list_empty(dd->dispatch)) - return 0; - - return 1; + return list_empty(&dd->fifo_list[WRITE]) + && list_empty(&dd->fifo_list[READ]); } static struct request * @@ -733,7 +676,6 @@ static int deadline_init_queue(request_queue_t *q, elevator_t *e) INIT_LIST_HEAD(&dd->fifo_list[WRITE]); dd->sort_list[READ] = RB_ROOT; dd->sort_list[WRITE] = RB_ROOT; - dd->dispatch = &q->queue_head; dd->fifo_expire[READ] = read_expire; dd->fifo_expire[WRITE] = write_expire; dd->writes_starved = writes_starved; @@ -748,10 +690,8 @@ static void deadline_put_request(request_queue_t *q, struct request *rq) struct deadline_data *dd = q->elevator->elevator_data; struct deadline_rq *drq = RQ_DATA(rq); - if (drq) { - mempool_free(drq, dd->drq_pool); - rq->elevator_private = NULL; - } + mempool_free(drq, dd->drq_pool); + rq->elevator_private = NULL; } static int @@ -917,9 +857,8 @@ static struct elevator_type iosched_deadline = { .elevator_merge_fn = deadline_merge, .elevator_merged_fn = deadline_merged_request, .elevator_merge_req_fn = deadline_merged_requests, - .elevator_next_req_fn = deadline_next_request, - .elevator_add_req_fn = deadline_insert_request, - .elevator_remove_req_fn = deadline_remove_request, + .elevator_dispatch_fn = deadline_dispatch_requests, + .elevator_add_req_fn = deadline_add_request, .elevator_queue_empty_fn = deadline_queue_empty, .elevator_former_req_fn = deadline_former_request, .elevator_latter_req_fn = deadline_latter_request, diff --git a/drivers/block/noop-iosched.c b/drivers/block/noop-iosched.c index b1730b62c37e..bc2252b6f2e5 100644 --- a/drivers/block/noop-iosched.c +++ b/drivers/block/noop-iosched.c @@ -28,13 +28,9 @@ static void elevator_noop_merge_requests(request_queue_t *q, struct request *req list_del_init(&next->queuelist); } -static void elevator_noop_add_request(request_queue_t *q, struct request *rq, - int where) +static void elevator_noop_add_request(request_queue_t *q, struct request *rq) { - if (where == ELEVATOR_INSERT_FRONT) - list_add(&rq->queuelist, &q->queue_head); - else - list_add_tail(&rq->queuelist, &q->queue_head); + elv_dispatch_add_tail(q, rq); /* * new merges must not precede this barrier @@ -45,19 +41,16 @@ static void elevator_noop_add_request(request_queue_t *q, struct request *rq, q->last_merge = rq; } -static struct request *elevator_noop_next_request(request_queue_t *q) +static int elevator_noop_dispatch(request_queue_t *q, int force) { - if (!list_empty(&q->queue_head)) - return list_entry_rq(q->queue_head.next); - - return NULL; + return 0; } static struct elevator_type elevator_noop = { .ops = { .elevator_merge_fn = elevator_noop_merge, .elevator_merge_req_fn = elevator_noop_merge_requests, - .elevator_next_req_fn = elevator_noop_next_request, + .elevator_dispatch_fn = elevator_noop_dispatch, .elevator_add_req_fn = elevator_noop_add_request, }, .elevator_name = "noop", -- GitLab From 06b86245c052963029bfd9020ca1f08ceb66f85a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 16:46:23 +0200 Subject: [PATCH 0459/1519] [PATCH] 03/05 move last_merge handlin into generic elevator code Currently, both generic elevator code and specific ioscheds participate in the management and usage of last_merge. This and the following patches move last_merge handling into generic elevator code. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 43 +++++++++++++++++----------------------- include/linux/blkdev.h | 3 +++ 2 files changed, 21 insertions(+), 25 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 29d6c8237ab3..415144372c75 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -83,15 +83,6 @@ inline int elv_try_merge(struct request *__rq, struct bio *bio) } EXPORT_SYMBOL(elv_try_merge); -inline int elv_try_last_merge(request_queue_t *q, struct bio *bio) -{ - if (q->last_merge) - return elv_try_merge(q->last_merge, bio); - - return ELEVATOR_NO_MERGE; -} -EXPORT_SYMBOL(elv_try_last_merge); - static struct elevator_type *elevator_find(const char *name) { struct elevator_type *e = NULL; @@ -239,6 +230,9 @@ void elv_dispatch_sort(request_queue_t *q, struct request *rq) unsigned max_back; struct list_head *entry; + if (q->last_merge == rq) + q->last_merge = NULL; + boundary = q->end_sector; max_back = q->max_back_kb * 2; boundary = boundary > max_back ? boundary - max_back : 0; @@ -265,6 +259,15 @@ void elv_dispatch_sort(request_queue_t *q, struct request *rq) int elv_merge(request_queue_t *q, struct request **req, struct bio *bio) { elevator_t *e = q->elevator; + int ret; + + if (q->last_merge) { + ret = elv_try_merge(q->last_merge, bio); + if (ret != ELEVATOR_NO_MERGE) { + *req = q->last_merge; + return ret; + } + } if (e->ops->elevator_merge_fn) return e->ops->elevator_merge_fn(q, req, bio); @@ -278,6 +281,8 @@ void elv_merged_request(request_queue_t *q, struct request *rq) if (e->ops->elevator_merged_fn) e->ops->elevator_merged_fn(q, rq); + + q->last_merge = rq; } void elv_merge_requests(request_queue_t *q, struct request *rq, @@ -285,11 +290,10 @@ void elv_merge_requests(request_queue_t *q, struct request *rq, { elevator_t *e = q->elevator; - if (q->last_merge == next) - q->last_merge = NULL; - if (e->ops->elevator_merge_req_fn) e->ops->elevator_merge_req_fn(q, rq, next); + + q->last_merge = rq; } void elv_requeue_request(request_queue_t *q, struct request *rq) @@ -384,6 +388,8 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, BUG_ON(!blk_fs_request(rq)); rq->flags |= REQ_SORTED; q->elevator->ops->elevator_add_req_fn(q, rq); + if (q->last_merge == NULL && rq_mergeable(rq)) + q->last_merge = rq; break; default: @@ -462,9 +468,6 @@ struct request *elv_next_request(request_queue_t *q) rq->flags |= REQ_STARTED; } - if (rq == q->last_merge) - q->last_merge = NULL; - if (!q->boundary_rq || q->boundary_rq == rq) { q->end_sector = rq_end_sector(rq); q->boundary_rq = NULL; @@ -518,16 +521,6 @@ void elv_dequeue_request(request_queue_t *q, struct request *rq) */ if (blk_account_rq(rq)) q->in_flight++; - - /* - * the main clearing point for q->last_merge is on retrieval of - * request by driver (it calls elv_next_request()), but it _can_ - * also happen here if a request is added to the queue but later - * deleted without ever being given to driver (merged with another - * request). - */ - if (rq == q->last_merge) - q->last_merge = NULL; } int elv_queue_empty(request_queue_t *q) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a2e496f285a4..bd55b1df8997 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -630,6 +630,9 @@ static inline void blkdev_dequeue_request(struct request *req) static inline void elv_dispatch_add_tail(struct request_queue *q, struct request *rq) { + if (q->last_merge == rq) + q->last_merge = NULL; + q->end_sector = rq_end_sector(rq); q->boundary_rq = rq; list_add_tail(&rq->queuelist, &q->queue_head); -- GitLab From 98b11471d72a374f346bec50a00d0887719b85b3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 16:46:54 +0200 Subject: [PATCH 0460/1519] [PATCH] 04/05 remove last_merge handling from ioscheds Remove last_merge handling from all ioscheds. This patch removes merging capability of noop iosched. Signed-off-by: Tejun Heo --- drivers/block/as-iosched.c | 35 ++++---------------------------- drivers/block/cfq-iosched.c | 26 ++---------------------- drivers/block/deadline-iosched.c | 30 ++------------------------- drivers/block/noop-iosched.c | 31 ---------------------------- 4 files changed, 8 insertions(+), 114 deletions(-) diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c index 1775ffe9edc7..5d20e4bcbc78 100644 --- a/drivers/block/as-iosched.c +++ b/drivers/block/as-iosched.c @@ -279,14 +279,6 @@ static inline void as_del_arq_hash(struct as_rq *arq) __as_del_arq_hash(arq); } -static void as_remove_merge_hints(request_queue_t *q, struct as_rq *arq) -{ - as_del_arq_hash(arq); - - if (q->last_merge == arq->request) - q->last_merge = NULL; -} - static void as_add_arq_hash(struct as_data *ad, struct as_rq *arq) { struct request *rq = arq->request; @@ -330,7 +322,7 @@ static struct request *as_find_arq_hash(struct as_data *ad, sector_t offset) BUG_ON(!arq->on_hash); if (!rq_mergeable(__rq)) { - as_remove_merge_hints(ad->q, arq); + as_del_arq_hash(arq); continue; } @@ -1040,7 +1032,7 @@ static void as_remove_queued_request(request_queue_t *q, struct request *rq) ad->next_arq[data_dir] = as_find_next_arq(ad, arq); list_del_init(&arq->fifo); - as_remove_merge_hints(q, arq); + as_del_arq_hash(arq); as_del_arq_rb(ad, arq); } @@ -1351,7 +1343,7 @@ as_add_aliased_request(struct as_data *ad, struct as_rq *arq, struct as_rq *alia /* * Don't want to have to handle merges. */ - as_remove_merge_hints(ad->q, arq); + as_del_arq_hash(arq); } /* @@ -1392,12 +1384,8 @@ static void as_add_request(request_queue_t *q, struct request *rq) arq->expires = jiffies + ad->fifo_expire[data_dir]; list_add_tail(&arq->fifo, &ad->fifo_list[data_dir]); - if (rq_mergeable(arq->request)) { + if (rq_mergeable(arq->request)) as_add_arq_hash(ad, arq); - - if (!ad->q->last_merge) - ad->q->last_merge = arq->request; - } as_update_arq(ad, arq); /* keep state machine up to date */ } else { @@ -1486,15 +1474,6 @@ as_merge(request_queue_t *q, struct request **req, struct bio *bio) struct request *__rq; int ret; - /* - * try last_merge to avoid going to hash - */ - ret = elv_try_last_merge(q, bio); - if (ret != ELEVATOR_NO_MERGE) { - __rq = q->last_merge; - goto out_insert; - } - /* * see if the merge hash can satisfy a back merge */ @@ -1523,9 +1502,6 @@ as_merge(request_queue_t *q, struct request **req, struct bio *bio) return ELEVATOR_NO_MERGE; out: - if (rq_mergeable(__rq)) - q->last_merge = __rq; -out_insert: if (ret) { if (rq_mergeable(__rq)) as_hot_arq_hash(ad, RQ_DATA(__rq)); @@ -1572,9 +1548,6 @@ static void as_merged_request(request_queue_t *q, struct request *req) * behind the disk head. We currently don't bother adjusting. */ } - - if (arq->on_hash) - q->last_merge = req; } static void diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index 7b14160e0798..62a19ed0443b 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -304,14 +304,6 @@ static inline void cfq_del_crq_hash(struct cfq_rq *crq) hlist_del_init(&crq->hash); } -static void cfq_remove_merge_hints(request_queue_t *q, struct cfq_rq *crq) -{ - cfq_del_crq_hash(crq); - - if (q->last_merge == crq->request) - q->last_merge = NULL; -} - static inline void cfq_add_crq_hash(struct cfq_data *cfqd, struct cfq_rq *crq) { const int hash_idx = CFQ_MHASH_FN(rq_hash_key(crq->request)); @@ -672,7 +664,7 @@ static void cfq_remove_request(struct request *rq) list_del_init(&rq->queuelist); cfq_del_crq_rb(crq); - cfq_remove_merge_hints(rq->q, crq); + cfq_del_crq_hash(crq); } static int @@ -682,12 +674,6 @@ cfq_merge(request_queue_t *q, struct request **req, struct bio *bio) struct request *__rq; int ret; - ret = elv_try_last_merge(q, bio); - if (ret != ELEVATOR_NO_MERGE) { - __rq = q->last_merge; - goto out_insert; - } - __rq = cfq_find_rq_hash(cfqd, bio->bi_sector); if (__rq && elv_rq_merge_ok(__rq, bio)) { ret = ELEVATOR_BACK_MERGE; @@ -702,8 +688,6 @@ cfq_merge(request_queue_t *q, struct request **req, struct bio *bio) return ELEVATOR_NO_MERGE; out: - q->last_merge = __rq; -out_insert: *req = __rq; return ret; } @@ -722,8 +706,6 @@ static void cfq_merged_request(request_queue_t *q, struct request *req) cfq_update_next_crq(crq); cfq_reposition_crq_rb(cfqq, crq); } - - q->last_merge = req; } static void @@ -1670,13 +1652,9 @@ static void cfq_insert_request(request_queue_t *q, struct request *rq) list_add_tail(&rq->queuelist, &cfqq->fifo); - if (rq_mergeable(rq)) { + if (rq_mergeable(rq)) cfq_add_crq_hash(cfqd, crq); - if (!cfqd->queue->last_merge) - cfqd->queue->last_merge = rq; - } - cfq_crq_enqueued(cfqd, cfqq, crq); } diff --git a/drivers/block/deadline-iosched.c b/drivers/block/deadline-iosched.c index 07de4d24ddba..43d93155efb8 100644 --- a/drivers/block/deadline-iosched.c +++ b/drivers/block/deadline-iosched.c @@ -112,15 +112,6 @@ static inline void deadline_del_drq_hash(struct deadline_rq *drq) __deadline_del_drq_hash(drq); } -static void -deadline_remove_merge_hints(request_queue_t *q, struct deadline_rq *drq) -{ - deadline_del_drq_hash(drq); - - if (q->last_merge == drq->request) - q->last_merge = NULL; -} - static inline void deadline_add_drq_hash(struct deadline_data *dd, struct deadline_rq *drq) { @@ -299,12 +290,8 @@ deadline_add_request(struct request_queue *q, struct request *rq) drq->expires = jiffies + dd->fifo_expire[data_dir]; list_add_tail(&drq->fifo, &dd->fifo_list[data_dir]); - if (rq_mergeable(rq)) { + if (rq_mergeable(rq)) deadline_add_drq_hash(dd, drq); - - if (!q->last_merge) - q->last_merge = rq; - } } /* @@ -316,8 +303,8 @@ static void deadline_remove_request(request_queue_t *q, struct request *rq) struct deadline_data *dd = q->elevator->elevator_data; list_del_init(&drq->fifo); - deadline_remove_merge_hints(q, drq); deadline_del_drq_rb(dd, drq); + deadline_del_drq_hash(drq); } static int @@ -327,15 +314,6 @@ deadline_merge(request_queue_t *q, struct request **req, struct bio *bio) struct request *__rq; int ret; - /* - * try last_merge to avoid going to hash - */ - ret = elv_try_last_merge(q, bio); - if (ret != ELEVATOR_NO_MERGE) { - __rq = q->last_merge; - goto out_insert; - } - /* * see if the merge hash can satisfy a back merge */ @@ -368,8 +346,6 @@ deadline_merge(request_queue_t *q, struct request **req, struct bio *bio) return ELEVATOR_NO_MERGE; out: - q->last_merge = __rq; -out_insert: if (ret) deadline_hot_drq_hash(dd, RQ_DATA(__rq)); *req = __rq; @@ -394,8 +370,6 @@ static void deadline_merged_request(request_queue_t *q, struct request *req) deadline_del_drq_rb(dd, drq); deadline_add_drq_rb(dd, drq); } - - q->last_merge = req; } static void diff --git a/drivers/block/noop-iosched.c b/drivers/block/noop-iosched.c index bc2252b6f2e5..f56b8edb06e4 100644 --- a/drivers/block/noop-iosched.c +++ b/drivers/block/noop-iosched.c @@ -7,38 +7,9 @@ #include #include -/* - * See if we can find a request that this buffer can be coalesced with. - */ -static int elevator_noop_merge(request_queue_t *q, struct request **req, - struct bio *bio) -{ - int ret; - - ret = elv_try_last_merge(q, bio); - if (ret != ELEVATOR_NO_MERGE) - *req = q->last_merge; - - return ret; -} - -static void elevator_noop_merge_requests(request_queue_t *q, struct request *req, - struct request *next) -{ - list_del_init(&next->queuelist); -} - static void elevator_noop_add_request(request_queue_t *q, struct request *rq) { elv_dispatch_add_tail(q, rq); - - /* - * new merges must not precede this barrier - */ - if (rq->flags & REQ_HARDBARRIER) - q->last_merge = NULL; - else if (!q->last_merge) - q->last_merge = rq; } static int elevator_noop_dispatch(request_queue_t *q, int force) @@ -48,8 +19,6 @@ static int elevator_noop_dispatch(request_queue_t *q, int force) static struct elevator_type elevator_noop = { .ops = { - .elevator_merge_fn = elevator_noop_merge, - .elevator_merge_req_fn = elevator_noop_merge_requests, .elevator_dispatch_fn = elevator_noop_dispatch, .elevator_add_req_fn = elevator_noop_add_request, }, -- GitLab From 4c9f7836406f41ef9da6ee68d7a0448fdb97b5ef Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 20 Oct 2005 16:47:40 +0200 Subject: [PATCH 0461/1519] [PATCH] 05/05 update biodoc to match new generic dispatch api Updates biodoc to reflect changes in elevator API Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- Documentation/block/biodoc.txt | 113 +++++++++++++++------------------ 1 file changed, 52 insertions(+), 61 deletions(-) diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 6dd274d7e1cf..2d65c2182161 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -906,9 +906,20 @@ Aside: 4. The I/O scheduler -I/O schedulers are now per queue. They should be runtime switchable and modular -but aren't yet. Jens has most bits to do this, but the sysfs implementation is -missing. +I/O scheduler, a.k.a. elevator, is implemented in two layers. Generic dispatch +queue and specific I/O schedulers. Unless stated otherwise, elevator is used +to refer to both parts and I/O scheduler to specific I/O schedulers. + +Block layer implements generic dispatch queue in ll_rw_blk.c and elevator.c. +The generic dispatch queue is responsible for properly ordering barrier +requests, requeueing, handling non-fs requests and all other subtleties. + +Specific I/O schedulers are responsible for ordering normal filesystem +requests. They can also choose to delay certain requests to improve +throughput or whatever purpose. As the plural form indicates, there are +multiple I/O schedulers. They can be built as modules but at least one should +be built inside the kernel. Each queue can choose different one and can also +change to another one dynamically. A block layer call to the i/o scheduler follows the convention elv_xxx(). This calls elevator_xxx_fn in the elevator switch (drivers/block/elevator.c). Oh, @@ -921,44 +932,36 @@ keeping work. The functions an elevator may implement are: (* are mandatory) elevator_merge_fn called to query requests for merge with a bio -elevator_merge_req_fn " " " with another request +elevator_merge_req_fn called when two requests get merged. the one + which gets merged into the other one will be + never seen by I/O scheduler again. IOW, after + being merged, the request is gone. elevator_merged_fn called when a request in the scheduler has been involved in a merge. It is used in the deadline scheduler for example, to reposition the request if its sorting order has changed. -*elevator_next_req_fn returns the next scheduled request, or NULL - if there are none (or none are ready). +elevator_dispatch_fn fills the dispatch queue with ready requests. + I/O schedulers are free to postpone requests by + not filling the dispatch queue unless @force + is non-zero. Once dispatched, I/O schedulers + are not allowed to manipulate the requests - + they belong to generic dispatch queue. -*elevator_add_req_fn called to add a new request into the scheduler +elevator_add_req_fn called to add a new request into the scheduler elevator_queue_empty_fn returns true if the merge queue is empty. Drivers shouldn't use this, but rather check if elv_next_request is NULL (without losing the request if one exists!) -elevator_remove_req_fn This is called when a driver claims ownership of - the target request - it now belongs to the - driver. It must not be modified or merged. - Drivers must not lose the request! A subsequent - call of elevator_next_req_fn must return the - _next_ request. - -elevator_requeue_req_fn called to add a request to the scheduler. This - is used when the request has alrnadebeen - returned by elv_next_request, but hasn't - completed. If this is not implemented then - elevator_add_req_fn is called instead. - elevator_former_req_fn elevator_latter_req_fn These return the request before or after the one specified in disk sort order. Used by the block layer to find merge possibilities. -elevator_completed_req_fn called when a request is completed. This might - come about due to being merged with another or - when the device completes the request. +elevator_completed_req_fn called when a request is completed. elevator_may_queue_fn returns true if the scheduler wants to allow the current context to queue a new request even if @@ -967,13 +970,33 @@ elevator_may_queue_fn returns true if the scheduler wants to allow the elevator_set_req_fn elevator_put_req_fn Must be used to allocate and free any elevator - specific storate for a request. + specific storage for a request. + +elevator_activate_req_fn Called when device driver first sees a request. + I/O schedulers can use this callback to + determine when actual execution of a request + starts. +elevator_deactivate_req_fn Called when device driver decides to delay + a request by requeueing it. elevator_init_fn elevator_exit_fn Allocate and free any elevator specific storage for a queue. -4.2 I/O scheduler implementation +4.2 Request flows seen by I/O schedulers +All requests seens by I/O schedulers strictly follow one of the following three +flows. + + set_req_fn -> + + i. add_req_fn -> (merged_fn ->)* -> dispatch_fn -> activate_req_fn -> + (deactivate_req_fn -> activate_req_fn ->)* -> completed_req_fn + ii. add_req_fn -> (merged_fn ->)* -> merge_req_fn + iii. [none] + + -> put_req_fn + +4.3 I/O scheduler implementation The generic i/o scheduler algorithm attempts to sort/merge/batch requests for optimal disk scan and request servicing performance (based on generic principles and device capabilities), optimized for: @@ -993,18 +1016,7 @@ request in sort order to prevent binary tree lookups. This arrangement is not a generic block layer characteristic however, so elevators may implement queues as they please. -ii. Last merge hint -The last merge hint is part of the generic queue layer. I/O schedulers must do -some management on it. For the most part, the most important thing is to make -sure q->last_merge is cleared (set to NULL) when the request on it is no longer -a candidate for merging (for example if it has been sent to the driver). - -The last merge performed is cached as a hint for the subsequent request. If -sequential data is being submitted, the hint is used to perform merges without -any scanning. This is not sufficient when there are multiple processes doing -I/O though, so a "merge hash" is used by some schedulers. - -iii. Merge hash +ii. Merge hash AS and deadline use a hash table indexed by the last sector of a request. This enables merging code to quickly look up "back merge" candidates, even when multiple I/O streams are being performed at once on one disk. @@ -1013,29 +1025,8 @@ multiple I/O streams are being performed at once on one disk. are far less common than "back merges" due to the nature of most I/O patterns. Front merges are handled by the binary trees in AS and deadline schedulers. -iv. Handling barrier cases -A request with flags REQ_HARDBARRIER or REQ_SOFTBARRIER must not be ordered -around. That is, they must be processed after all older requests, and before -any newer ones. This includes merges! - -In AS and deadline schedulers, barriers have the effect of flushing the reorder -queue. The performance cost of this will vary from nothing to a lot depending -on i/o patterns and device characteristics. Obviously they won't improve -performance, so their use should be kept to a minimum. - -v. Handling insertion position directives -A request may be inserted with a position directive. The directives are one of -ELEVATOR_INSERT_BACK, ELEVATOR_INSERT_FRONT, ELEVATOR_INSERT_SORT. - -ELEVATOR_INSERT_SORT is a general directive for non-barrier requests. -ELEVATOR_INSERT_BACK is used to insert a barrier to the back of the queue. -ELEVATOR_INSERT_FRONT is used to insert a barrier to the front of the queue, and -overrides the ordering requested by any previous barriers. In practice this is -harmless and required, because it is used for SCSI requeueing. This does not -require flushing the reorder queue, so does not impose a performance penalty. - -vi. Plugging the queue to batch requests in anticipation of opportunities for - merge/sort optimizations +iii. Plugging the queue to batch requests in anticipation of opportunities for + merge/sort optimizations This is just the same as in 2.4 so far, though per-device unplugging support is anticipated for 2.5. Also with a priority-based i/o scheduler, @@ -1069,7 +1060,7 @@ Aside: blk_kick_queue() to unplug a specific queue (right away ?) or optionally, all queues, is in the plan. -4.3 I/O contexts +4.4 I/O contexts I/O contexts provide a dynamically allocated per process data area. They may be used in I/O schedulers, and in the block layer (could be used for IO statis, priorities for example). See *io_context in drivers/block/ll_rw_blk.c, and -- GitLab From cb19833dccb32f97cacbfff834b53523915f13f6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 24 Oct 2005 08:35:58 +0200 Subject: [PATCH 0462/1519] [BLOCK] kill generic max_back_kb handling This patch kills max_back_kb handling from elv_dispatch_sort() and kills max_back_kb field from struct request_queue. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 6 +----- include/linux/blkdev.h | 1 - 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 415144372c75..af2388e73f61 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -136,7 +136,6 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e, q->elevator = eq; q->end_sector = 0; q->boundary_rq = NULL; - q->max_back_kb = 0; if (eq->ops->elevator_init_fn) ret = eq->ops->elevator_init_fn(q, eq); @@ -227,16 +226,13 @@ void elevator_exit(elevator_t *e) void elv_dispatch_sort(request_queue_t *q, struct request *rq) { sector_t boundary; - unsigned max_back; struct list_head *entry; if (q->last_merge == rq) q->last_merge = NULL; boundary = q->end_sector; - max_back = q->max_back_kb * 2; - boundary = boundary > max_back ? boundary - max_back : 0; - + list_for_each_prev(entry, &q->queue_head) { struct request *pos = list_entry_rq(entry); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index bd55b1df8997..159dbcd2eb59 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -339,7 +339,6 @@ struct request_queue */ sector_t end_sector; struct request *boundary_rq; - unsigned int max_back_kb; /* * Auto-unplugging state -- GitLab From cb98fc8bb9c141009e2bda99c0db39d387e142cf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 28 Oct 2005 08:29:39 +0200 Subject: [PATCH 0463/1519] [BLOCK] Reimplement elevator switch This patch reimplements elevator switch. This patch assumes generic dispatch queue patchset is applied. * Each request is tagged with REQ_ELVPRIV flag if it has its elevator private data set. * Requests which doesn't have REQ_ELVPRIV flag set never enter iosched. They are always directly back inserted to dispatch queue. Of course, elevator_put_req_fn is called only for requests which have its REQ_ELVPRIV set. * Request queue maintains the current number of requests which have its elevator data set (elevator_set_req_fn called) in q->rq->elvpriv. * If a request queue has QUEUE_FLAG_BYPASS set, elevator private data is not allocated for new requests. To switch to another iosched, we set QUEUE_FLAG_BYPASS and wait until elvpriv goes to zero; then, we attach the new iosched and clears QUEUE_FLAG_BYPASS. New implementation is much simpler and main code paths are less cluttered, IMHO. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 78 ++++++++++----------- drivers/block/ll_rw_blk.c | 142 ++++++++------------------------------ include/linux/blkdev.h | 10 ++- 3 files changed, 66 insertions(+), 164 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index af2388e73f61..272d93946621 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -34,6 +34,7 @@ #include #include #include +#include #include @@ -131,11 +132,7 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e, eq->ops = &e->ops; eq->elevator_type = e; - INIT_LIST_HEAD(&q->queue_head); - q->last_merge = NULL; q->elevator = eq; - q->end_sector = 0; - q->boundary_rq = NULL; if (eq->ops->elevator_init_fn) ret = eq->ops->elevator_init_fn(q, eq); @@ -184,6 +181,12 @@ int elevator_init(request_queue_t *q, char *name) struct elevator_queue *eq; int ret = 0; + INIT_LIST_HEAD(&q->queue_head); + q->last_merge = NULL; + q->end_sector = 0; + q->boundary_rq = NULL; + q->max_back_kb = 0; + elevator_setup_default(); if (!name) @@ -336,23 +339,14 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where, q->end_sector = rq_end_sector(rq); q->boundary_rq = rq; } - } + } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT) + where = ELEVATOR_INSERT_BACK; if (plug) blk_plug_device(q); rq->q = q; - if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) { - /* - * if drain is set, store the request "locally". when the drain - * is finished, the requests will be handed ordered to the io - * scheduler - */ - list_add_tail(&rq->queuelist, &q->drain_list); - return; - } - switch (where) { case ELEVATOR_INSERT_FRONT: rq->flags |= REQ_SOFTBARRIER; @@ -659,25 +653,36 @@ EXPORT_SYMBOL_GPL(elv_unregister); * switch to new_e io scheduler. be careful not to introduce deadlocks - * we don't free the old io scheduler, before we have allocated what we * need for the new one. this way we have a chance of going back to the old - * one, if the new one fails init for some reason. we also do an intermediate - * switch to noop to ensure safety with stack-allocated requests, since they - * don't originate from the block layer allocator. noop is safe here, because - * it never needs to touch the elevator itself for completion events. DRAIN - * flags will make sure we don't touch it for additions either. + * one, if the new one fails init for some reason. */ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) { - elevator_t *e = kmalloc(sizeof(elevator_t), GFP_KERNEL); - struct elevator_type *noop_elevator = NULL; - elevator_t *old_elevator; + elevator_t *old_elevator, *e; + /* + * Allocate new elevator + */ + e = kmalloc(sizeof(elevator_t), GFP_KERNEL); if (!e) goto error; /* - * first step, drain requests from the block freelist + * Turn on BYPASS and drain all requests w/ elevator private data */ - blk_wait_queue_drained(q, 0); + spin_lock_irq(q->queue_lock); + + set_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + + while (q->elevator->ops->elevator_dispatch_fn(q, 1)) + ; + + while (q->rq.elvpriv) { + spin_unlock_irq(q->queue_lock); + msleep(100); + spin_lock_irq(q->queue_lock); + } + + spin_unlock_irq(q->queue_lock); /* * unregister old elevator data @@ -685,18 +690,6 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) elv_unregister_queue(q); old_elevator = q->elevator; - /* - * next step, switch to noop since it uses no private rq structures - * and doesn't allocate any memory for anything. then wait for any - * non-fs requests in-flight - */ - noop_elevator = elevator_get("noop"); - spin_lock_irq(q->queue_lock); - elevator_attach(q, noop_elevator, e); - spin_unlock_irq(q->queue_lock); - - blk_wait_queue_drained(q, 1); - /* * attach and start new elevator */ @@ -707,11 +700,10 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) goto fail_register; /* - * finally exit old elevator and start queue again + * finally exit old elevator and turn off BYPASS. */ elevator_exit(old_elevator); - blk_finish_queue_drain(q); - elevator_put(noop_elevator); + clear_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); return; fail_register: @@ -720,13 +712,13 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) * one again (along with re-adding the sysfs dir) */ elevator_exit(e); + e = NULL; fail: q->elevator = old_elevator; elv_register_queue(q); - blk_finish_queue_drain(q); + clear_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + kfree(e); error: - if (noop_elevator) - elevator_put(noop_elevator); elevator_put(new_e); printk(KERN_ERR "elevator: switch to %s failed\n",new_e->elevator_name); } diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index d2a66fd309c3..f7c9931cb380 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -263,8 +263,6 @@ void blk_queue_make_request(request_queue_t * q, make_request_fn * mfn) blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); blk_queue_activity_fn(q, NULL, NULL); - - INIT_LIST_HEAD(&q->drain_list); } EXPORT_SYMBOL(blk_queue_make_request); @@ -1050,6 +1048,7 @@ static char *rq_flags[] = { "REQ_STARTED", "REQ_DONTPREP", "REQ_QUEUED", + "REQ_ELVPRIV", "REQ_PC", "REQ_BLOCK_PC", "REQ_SENSE", @@ -1640,9 +1639,9 @@ static int blk_init_free_list(request_queue_t *q) rl->count[READ] = rl->count[WRITE] = 0; rl->starved[READ] = rl->starved[WRITE] = 0; + rl->elvpriv = 0; init_waitqueue_head(&rl->wait[READ]); init_waitqueue_head(&rl->wait[WRITE]); - init_waitqueue_head(&rl->drain); rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab, mempool_free_slab, request_cachep, q->node); @@ -1785,12 +1784,14 @@ EXPORT_SYMBOL(blk_get_queue); static inline void blk_free_request(request_queue_t *q, struct request *rq) { - elv_put_request(q, rq); + if (rq->flags & REQ_ELVPRIV) + elv_put_request(q, rq); mempool_free(rq, q->rq.rq_pool); } static inline struct request * -blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask) +blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, + int priv, int gfp_mask) { struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask); @@ -1803,11 +1804,15 @@ blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask) */ rq->flags = rw; - if (!elv_set_request(q, rq, bio, gfp_mask)) - return rq; + if (priv) { + if (unlikely(elv_set_request(q, rq, bio, gfp_mask))) { + mempool_free(rq, q->rq.rq_pool); + return NULL; + } + rq->flags |= REQ_ELVPRIV; + } - mempool_free(rq, q->rq.rq_pool); - return NULL; + return rq; } /* @@ -1863,22 +1868,18 @@ static void __freed_request(request_queue_t *q, int rw) * A request has just been released. Account for it, update the full and * congestion status, wake up any waiters. Called under q->queue_lock. */ -static void freed_request(request_queue_t *q, int rw) +static void freed_request(request_queue_t *q, int rw, int priv) { struct request_list *rl = &q->rq; rl->count[rw]--; + if (priv) + rl->elvpriv--; __freed_request(q, rw); if (unlikely(rl->starved[rw ^ 1])) __freed_request(q, rw ^ 1); - - if (!rl->count[READ] && !rl->count[WRITE]) { - smp_mb(); - if (unlikely(waitqueue_active(&rl->drain))) - wake_up(&rl->drain); - } } #define blkdev_free_rq(list) list_entry((list)->next, struct request, queuelist) @@ -1893,9 +1894,7 @@ static struct request *get_request(request_queue_t *q, int rw, struct bio *bio, struct request *rq = NULL; struct request_list *rl = &q->rq; struct io_context *ioc = current_io_context(GFP_ATOMIC); - - if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) - goto out; + int priv; if (rl->count[rw]+1 >= q->nr_requests) { /* @@ -1940,9 +1939,14 @@ static struct request *get_request(request_queue_t *q, int rw, struct bio *bio, rl->starved[rw] = 0; if (rl->count[rw] >= queue_congestion_on_threshold(q)) set_queue_congested(q, rw); + + priv = !test_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + if (priv) + rl->elvpriv++; + spin_unlock_irq(q->queue_lock); - rq = blk_alloc_request(q, rw, bio, gfp_mask); + rq = blk_alloc_request(q, rw, bio, priv, gfp_mask); if (!rq) { /* * Allocation failed presumably due to memory. Undo anything @@ -1952,7 +1956,7 @@ static struct request *get_request(request_queue_t *q, int rw, struct bio *bio, * wait queue, but this is pretty rare. */ spin_lock_irq(q->queue_lock); - freed_request(q, rw); + freed_request(q, rw, priv); /* * in the very unlikely event that allocation failed and no @@ -2470,11 +2474,12 @@ static void __blk_put_request(request_queue_t *q, struct request *req) */ if (rl) { int rw = rq_data_dir(req); + int priv = req->flags & REQ_ELVPRIV; BUG_ON(!list_empty(&req->queuelist)); blk_free_request(q, req); - freed_request(q, rw); + freed_request(q, rw, priv); } } @@ -2802,97 +2807,6 @@ static inline void blk_partition_remap(struct bio *bio) } } -void blk_finish_queue_drain(request_queue_t *q) -{ - struct request_list *rl = &q->rq; - struct request *rq; - int requeued = 0; - - spin_lock_irq(q->queue_lock); - clear_bit(QUEUE_FLAG_DRAIN, &q->queue_flags); - - while (!list_empty(&q->drain_list)) { - rq = list_entry_rq(q->drain_list.next); - - list_del_init(&rq->queuelist); - elv_requeue_request(q, rq); - requeued++; - } - - if (requeued) - q->request_fn(q); - - spin_unlock_irq(q->queue_lock); - - wake_up(&rl->wait[0]); - wake_up(&rl->wait[1]); - wake_up(&rl->drain); -} - -static int wait_drain(request_queue_t *q, struct request_list *rl, int dispatch) -{ - int wait = rl->count[READ] + rl->count[WRITE]; - - if (dispatch) - wait += !list_empty(&q->queue_head); - - return wait; -} - -/* - * We rely on the fact that only requests allocated through blk_alloc_request() - * have io scheduler private data structures associated with them. Any other - * type of request (allocated on stack or through kmalloc()) should not go - * to the io scheduler core, but be attached to the queue head instead. - */ -void blk_wait_queue_drained(request_queue_t *q, int wait_dispatch) -{ - struct request_list *rl = &q->rq; - DEFINE_WAIT(wait); - - spin_lock_irq(q->queue_lock); - set_bit(QUEUE_FLAG_DRAIN, &q->queue_flags); - - while (wait_drain(q, rl, wait_dispatch)) { - prepare_to_wait(&rl->drain, &wait, TASK_UNINTERRUPTIBLE); - - if (wait_drain(q, rl, wait_dispatch)) { - __generic_unplug_device(q); - spin_unlock_irq(q->queue_lock); - io_schedule(); - spin_lock_irq(q->queue_lock); - } - - finish_wait(&rl->drain, &wait); - } - - spin_unlock_irq(q->queue_lock); -} - -/* - * block waiting for the io scheduler being started again. - */ -static inline void block_wait_queue_running(request_queue_t *q) -{ - DEFINE_WAIT(wait); - - while (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) { - struct request_list *rl = &q->rq; - - prepare_to_wait_exclusive(&rl->drain, &wait, - TASK_UNINTERRUPTIBLE); - - /* - * re-check the condition. avoids using prepare_to_wait() - * in the fast path (queue is running) - */ - if (test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)) - io_schedule(); - - finish_wait(&rl->drain, &wait); - } -} - static void handle_bad_sector(struct bio *bio) { char b[BDEVNAME_SIZE]; @@ -2988,8 +2902,6 @@ void generic_make_request(struct bio *bio) if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags))) goto end_io; - block_wait_queue_running(q); - /* * If this device has partitions, remap block n * of partition p to block n+start(p) of the disk. diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 159dbcd2eb59..6186d5e2110f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -107,9 +107,9 @@ typedef void (rq_end_io_fn)(struct request *); struct request_list { int count[2]; int starved[2]; + int elvpriv; mempool_t *rq_pool; wait_queue_head_t wait[2]; - wait_queue_head_t drain; }; #define BLK_MAX_CDB 16 @@ -211,6 +211,7 @@ enum rq_flag_bits { __REQ_STARTED, /* drive already may have started this one */ __REQ_DONTPREP, /* don't call prep for this one */ __REQ_QUEUED, /* uses queueing */ + __REQ_ELVPRIV, /* elevator private data attached */ /* * for ATA/ATAPI devices */ @@ -244,6 +245,7 @@ enum rq_flag_bits { #define REQ_STARTED (1 << __REQ_STARTED) #define REQ_DONTPREP (1 << __REQ_DONTPREP) #define REQ_QUEUED (1 << __REQ_QUEUED) +#define REQ_ELVPRIV (1 << __REQ_ELVPRIV) #define REQ_PC (1 << __REQ_PC) #define REQ_BLOCK_PC (1 << __REQ_BLOCK_PC) #define REQ_SENSE (1 << __REQ_SENSE) @@ -413,8 +415,6 @@ struct request_queue unsigned int sg_reserved_size; int node; - struct list_head drain_list; - /* * reserved for flush operations */ @@ -442,7 +442,7 @@ enum { #define QUEUE_FLAG_DEAD 5 /* queue being torn down */ #define QUEUE_FLAG_REENTER 6 /* Re-entrancy avoidance */ #define QUEUE_FLAG_PLUGGED 7 /* queue is plugged */ -#define QUEUE_FLAG_DRAIN 8 /* draining queue for sched switch */ +#define QUEUE_FLAG_BYPASS 8 /* don't use elevator, just do FIFO */ #define QUEUE_FLAG_FLUSH 9 /* doing barrier flush sequence */ #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) @@ -668,8 +668,6 @@ extern void blk_dump_rq_flags(struct request *, char *); extern void generic_unplug_device(request_queue_t *); extern void __generic_unplug_device(request_queue_t *); extern long nr_blockdev_pages(void); -extern void blk_wait_queue_drained(request_queue_t *, int); -extern void blk_finish_queue_drain(request_queue_t *); int blk_get_queue(request_queue_t *); request_queue_t *blk_alloc_queue(int gfp_mask); -- GitLab From 64521d1a3ba7cc7fe4ab5640da83d88144f05340 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 28 Oct 2005 08:30:39 +0200 Subject: [PATCH 0464/1519] [BLOCK] elevator switch fixes/cleanup - 100msec sleep is a little excessive, lots of requests can complete in that timeframe. Use 10msec instead. - Rename QUEUE_FLAG_BYPASS to QUEUE_FLAG_ELVSWITCH to indicate what is going on. Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 8 ++++---- drivers/block/ll_rw_blk.c | 2 +- include/linux/blkdev.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 272d93946621..cf9bedbb761b 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -671,14 +671,14 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) */ spin_lock_irq(q->queue_lock); - set_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + set_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); while (q->elevator->ops->elevator_dispatch_fn(q, 1)) ; while (q->rq.elvpriv) { spin_unlock_irq(q->queue_lock); - msleep(100); + msleep(10); spin_lock_irq(q->queue_lock); } @@ -703,7 +703,7 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) * finally exit old elevator and turn off BYPASS. */ elevator_exit(old_elevator); - clear_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); return; fail_register: @@ -716,7 +716,7 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e) fail: q->elevator = old_elevator; elv_register_queue(q); - clear_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); kfree(e); error: elevator_put(new_e); diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index f7c9931cb380..fc12d019b19d 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -1940,7 +1940,7 @@ static struct request *get_request(request_queue_t *q, int rw, struct bio *bio, if (rl->count[rw] >= queue_congestion_on_threshold(q)) set_queue_congested(q, rw); - priv = !test_bit(QUEUE_FLAG_BYPASS, &q->queue_flags); + priv = !test_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags); if (priv) rl->elvpriv++; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6186d5e2110f..7d9d14d6d8f9 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -442,7 +442,7 @@ enum { #define QUEUE_FLAG_DEAD 5 /* queue being torn down */ #define QUEUE_FLAG_REENTER 6 /* Re-entrancy avoidance */ #define QUEUE_FLAG_PLUGGED 7 /* queue is plugged */ -#define QUEUE_FLAG_BYPASS 8 /* don't use elevator, just do FIFO */ +#define QUEUE_FLAG_ELVSWITCH 8 /* don't use elevator, just do FIFO */ #define QUEUE_FLAG_FLUSH 9 /* doing barrier flush sequence */ #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) -- GitLab From 772eca7825358f52cf208afd7ab8ce22722ce41a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 28 Oct 2005 09:01:17 +0200 Subject: [PATCH 0465/1519] [BLOCK] Leftover reference to ->max_back_kb Signed-off-by: Jens Axboe --- drivers/block/elevator.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index cf9bedbb761b..8de77416bd2f 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -185,7 +185,6 @@ int elevator_init(request_queue_t *q, char *name) q->last_merge = NULL; q->end_sector = 0; q->boundary_rq = NULL; - q->max_back_kb = 0; elevator_setup_default(); -- GitLab From 7fca0aa489c82bef85514b5447f6a0be81543115 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 10:20:25 +0100 Subject: [PATCH 0466/1519] [ARM] 1/4: Move include of asm/hardware.h to asm-arm/arch-*/io.h Including asm/hardware.h into asm/io.h can cause #define clashes between platform specific definitions and driver local definitions. Signed-off-by: Russell King --- include/asm-arm/arch-aaec2000/io.h | 2 ++ include/asm-arm/arch-cl7500/io.h | 2 ++ include/asm-arm/arch-clps711x/io.h | 2 ++ include/asm-arm/arch-ebsa110/io.h | 2 ++ include/asm-arm/arch-ebsa285/io.h | 2 ++ include/asm-arm/arch-epxa10db/io.h | 2 ++ include/asm-arm/arch-h720x/io.h | 2 +- include/asm-arm/arch-imx/io.h | 2 ++ include/asm-arm/arch-integrator/io.h | 2 ++ include/asm-arm/arch-iop3xx/io.h | 2 ++ include/asm-arm/arch-ixp2000/io.h | 2 ++ include/asm-arm/arch-l7200/io.h | 2 +- include/asm-arm/arch-lh7a40x/io.h | 2 ++ include/asm-arm/arch-omap/io.h | 2 ++ include/asm-arm/arch-pxa/io.h | 2 ++ include/asm-arm/arch-rpc/io.h | 2 ++ include/asm-arm/arch-s3c2410/io.h | 2 ++ include/asm-arm/arch-sa1100/io.h | 2 ++ include/asm-arm/arch-shark/io.h | 2 ++ include/asm-arm/arch-versatile/io.h | 2 ++ include/asm-arm/io.h | 1 - 21 files changed, 38 insertions(+), 3 deletions(-) diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h index c58a8d10425a..8d67907fd4f0 100644 --- a/include/asm-arm/arch-aaec2000/io.h +++ b/include/asm-arm/arch-aaec2000/io.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h index f0113bc75630..89a33287f4fe 100644 --- a/include/asm-arm/arch-cl7500/io.h +++ b/include/asm-arm/arch-cl7500/io.h @@ -10,6 +10,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h index 14d7e8da5453..62613b0e2d96 100644 --- a/include/asm-arm/arch-clps711x/io.h +++ b/include/asm-arm/arch-clps711x/io.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff #define __io(a) ((void __iomem *)(a)) diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h index 68e04c0bb3f7..ecf433634246 100644 --- a/include/asm-arm/arch-ebsa110/io.h +++ b/include/asm-arm/arch-ebsa110/io.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffff u8 __inb8(unsigned int port); diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h index 70576b17f922..776f9d377057 100644 --- a/include/asm-arm/arch-ebsa285/io.h +++ b/include/asm-arm/arch-ebsa285/io.h @@ -14,6 +14,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffff /* diff --git a/include/asm-arm/arch-epxa10db/io.h b/include/asm-arm/arch-epxa10db/io.h index 1f0afa257621..9fe100c9d6be 100644 --- a/include/asm-arm/arch-epxa10db/io.h +++ b/include/asm-arm/arch-epxa10db/io.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffff diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h index 68814828c9a7..d3ccfd8172b7 100644 --- a/include/asm-arm/arch-h720x/io.h +++ b/include/asm-arm/arch-h720x/io.h @@ -14,7 +14,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h index 28a4cca6a4cb..b191cdd05576 100644 --- a/include/asm-arm/arch-imx/io.h +++ b/include/asm-arm/arch-imx/io.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff #define __io(a) ((void __iomem *)(a)) diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h index fbea8be67d26..1329a731160d 100644 --- a/include/asm-arm/arch-integrator/io.h +++ b/include/asm-arm/arch-integrator/io.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffff #define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) diff --git a/include/asm-arm/arch-iop3xx/io.h b/include/asm-arm/arch-iop3xx/io.h index 2761dfd8694d..f39046a6ab14 100644 --- a/include/asm-arm/arch-iop3xx/io.h +++ b/include/asm-arm/arch-iop3xx/io.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff #define __io(p) ((void __iomem *)(p)) diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index 3241cd6f0778..7fbcdf9931ee 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -15,6 +15,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff #define __mem_pci(a) (a) diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h index fc012a39e2cb..cab8ad0adf09 100644 --- a/include/asm-arm/arch-l7200/io.h +++ b/include/asm-arm/arch-l7200/io.h @@ -10,7 +10,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h index c13bdd9add92..bbcd4335f441 100644 --- a/include/asm-arm/arch-lh7a40x/io.h +++ b/include/asm-arm/arch-lh7a40x/io.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* No ISA or PCI bus on this machine. */ diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 11fbf629bf75..3d5bcd545082 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -34,6 +34,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h index c3bdbe44e21f..eb2dd58d397f 100644 --- a/include/asm-arm/arch-pxa/io.h +++ b/include/asm-arm/arch-pxa/io.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h index 24453c405a87..b4da08d7a336 100644 --- a/include/asm-arm/arch-rpc/io.h +++ b/include/asm-arm/arch-rpc/io.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h index 4bf272ed9add..16fbc8afffd9 100644 --- a/include/asm-arm/arch-s3c2410/io.h +++ b/include/asm-arm/arch-s3c2410/io.h @@ -15,6 +15,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h index 7d969ffbd3bb..9c8f588f35db 100644 --- a/include/asm-arm/arch-sa1100/io.h +++ b/include/asm-arm/arch-sa1100/io.h @@ -10,6 +10,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h index 5e6ed0038b2b..87ffa27f2962 100644 --- a/include/asm-arm/arch-shark/io.h +++ b/include/asm-arm/arch-shark/io.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h index 47e904cf25c7..c2eed7f04b78 100644 --- a/include/asm-arm/arch-versatile/io.h +++ b/include/asm-arm/arch-versatile/io.h @@ -20,6 +20,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include + #define IO_SPACE_LIMIT 0xffffffff static inline void __iomem *__io(unsigned long addr) diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 5c4ae8f5dbb0..2e6799632f12 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -26,7 +26,6 @@ #include #include #include -#include /* * ISA I/O bus memory addresses are 1:1 with the physical address. -- GitLab From 766529fa2c95e2006ad4c4485c4cde0912d21f12 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 10:29:21 +0100 Subject: [PATCH 0467/1519] [ARM] 2/4: Remove asm/hardware.h from asm-arm/arch-ebsa110/io.h EBSA110 only requires hardware.h to be included for a couple of files. Move the include there. Signed-off-by: Russell King --- arch/arm/mach-ebsa110/io.c | 1 + drivers/net/arm/am79c961a.c | 1 + include/asm-arm/arch-ebsa110/io.h | 2 -- 3 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c index ef7eb5dc91bd..c648bfb676a1 100644 --- a/arch/arm/mach-ebsa110/io.c +++ b/arch/arm/mach-ebsa110/io.c @@ -24,6 +24,7 @@ #include #include +#include #include #include diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index c56d86d371a9..3d50e953faaa 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -29,6 +29,7 @@ #include #include +#include #include #define TX_BUFFERS 15 diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h index ecf433634246..68e04c0bb3f7 100644 --- a/include/asm-arm/arch-ebsa110/io.h +++ b/include/asm-arm/arch-ebsa110/io.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xffff u8 __inb8(unsigned int port); -- GitLab From c6b8fdad144bbb915d124ffd95011ad55730bf9f Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:05:16 +0100 Subject: [PATCH 0468/1519] [ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.h Signed-off-by: Russell King --- drivers/mmc/mmci.c | 1 + drivers/serial/amba-pl010.c | 1 + drivers/serial/amba-pl011.c | 1 + drivers/video/amba-clcd.c | 1 + include/asm-arm/arch-integrator/hardware.h | 9 --------- include/asm-arm/arch-integrator/io.h | 10 ++++++++-- include/asm-arm/arch-versatile/io.h | 2 -- sound/arm/aaci.c | 1 + 8 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c index 91c74843dc0d..1e6bdba26756 100644 --- a/drivers/mmc/mmci.c +++ b/drivers/mmc/mmci.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 679e678c7e6a..ddd0307fece2 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -50,6 +50,7 @@ #include #include +#include #include #include diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 1ff629c74750..938d185841c9 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -50,6 +50,7 @@ #include #include +#include #include #include #include diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 321dbe91dc14..cde6fd8eb390 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -22,6 +22,7 @@ #include #include +#include #include #include diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h index be2716eeaa02..6f0947bc500d 100644 --- a/include/asm-arm/arch-integrator/hardware.h +++ b/include/asm-arm/arch-integrator/hardware.h @@ -33,15 +33,6 @@ #define IO_SIZE 0x0B000000 // How much? #define IO_START INTEGRATOR_HDR_BASE // PA of IO -/* - * Similar to above, but for PCI addresses (memory, IO, Config and the - * V3 chip itself). WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - #define PCIO_BASE PCI_IO_VADDR #define PCIMEM_BASE PCI_MEMORY_VADDR diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h index 1329a731160d..31f2deab51b0 100644 --- a/include/asm-arm/arch-integrator/io.h +++ b/include/asm-arm/arch-integrator/io.h @@ -20,10 +20,16 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xffff +/* + * WARNING: this has to mirror definitions in platform.h + */ +#define PCI_MEMORY_VADDR 0xe8000000 +#define PCI_CONFIG_VADDR 0xec000000 +#define PCI_V3_VADDR 0xed000000 +#define PCI_IO_VADDR 0xee000000 + #define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) #define __mem_pci(a) (a) #define __mem_isa(a) ((a) + PCI_MEMORY_VADDR) diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h index c2eed7f04b78..47e904cf25c7 100644 --- a/include/asm-arm/arch-versatile/io.h +++ b/include/asm-arm/arch-versatile/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xffffffff static inline void __iomem *__io(unsigned long addr) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index b2d5db20ec8c..559ead6367da 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -20,6 +20,7 @@ #include #include +#include #include #include -- GitLab From 674c04538284736c4a44224c78cb784b2c972f98 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:25:28 +0100 Subject: [PATCH 0469/1519] [ARM] 3/4: Remove asm/hardware.h from SA1100 io.h Signed-off-by: Russell King --- arch/arm/mm/ioremap.c | 1 + drivers/mtd/maps/sa1100-flash.c | 1 + include/asm-arm/arch-sa1100/hardware.h | 7 ------- include/asm-arm/arch-sa1100/io.h | 6 +++++- include/asm-arm/arch-sa1100/system.h | 1 + 5 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 7110e54182b1..6fb1258df1b5 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -26,6 +26,7 @@ #include #include +#include #include #include diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 8dcaa357b4bb..9133351ba483 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h index 19c3b1e186bb..28711aaa4968 100644 --- a/include/asm-arm/arch-sa1100/hardware.h +++ b/include/asm-arm/arch-sa1100/hardware.h @@ -21,13 +21,6 @@ #define UNCACHEABLE_ADDR 0xfa050000 -/* - * We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for - * in*()/out*() macros to be usable for all cases. - */ -#define PCIO_BASE 0 - - /* * SA1100 internal I/O mappings * diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h index 9c8f588f35db..9d4fe6cf205b 100644 --- a/include/asm-arm/arch-sa1100/io.h +++ b/include/asm-arm/arch-sa1100/io.h @@ -18,7 +18,11 @@ * We don't actually have real ISA nor PCI buses, but there is so many * drivers out there that might just work if we fake them... */ -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} +#define __io(a) __io(a) #define __mem_pci(a) (a) #define __mem_isa(a) (a) diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h index 6f52118ba1a4..0f0612f79b2b 100644 --- a/include/asm-arm/arch-sa1100/system.h +++ b/include/asm-arm/arch-sa1100/system.h @@ -4,6 +4,7 @@ * Copyright (c) 1999 Nicolas Pitre */ #include +#include static inline void arch_idle(void) { -- GitLab From f339ab3d6c59f8f898c165384aa2b6a0ae5d4c1c Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:29:43 +0100 Subject: [PATCH 0470/1519] [ARM] Fix sparse warnings Fix sparse warnings in arch/arm/kernel/module.c, arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c, and platform support files. Signed-off-by: Russell King --- arch/arm/kernel/module.c | 1 + arch/arm/mm/consistent.c | 6 +++--- drivers/pcmcia/sa1111_generic.c | 2 +- include/asm-arm/mach/arch.h | 6 +++--- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 1a85cfdad5ac..6055e1427ba3 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -11,6 +11,7 @@ */ #include #include +#include #include #include #include diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 26356ce4da54..0f32de977f5e 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -75,7 +75,7 @@ static struct vm_region consistent_head = { }; static struct vm_region * -vm_region_alloc(struct vm_region *head, size_t size, int gfp) +vm_region_alloc(struct vm_region *head, size_t size, unsigned int gfp) { unsigned long addr = head->vm_start, end = head->vm_end - size; unsigned long flags; @@ -133,8 +133,8 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad #endif static void * -__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp, - pgprot_t prot) +__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, + unsigned int gfp, pgprot_t prot) { struct page *page; struct vm_region *c; diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index bb90a1448a53..81ded52c8959 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -122,7 +122,7 @@ void sa1111_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) static int pcmcia_probe(struct sa1111_dev *dev) { - char *base; + void __iomem *base; if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h index 4fa95084a8c0..7273c6fd95b5 100644 --- a/include/asm-arm/mach/arch.h +++ b/include/asm-arm/mach/arch.h @@ -48,10 +48,10 @@ struct machine_desc { * Set of macros to define architecture features. This is built into * a table by the linker. */ -#define MACHINE_START(_type,_name) \ -const struct machine_desc __mach_desc_##_type \ +#define MACHINE_START(_type,_name) \ +static const struct machine_desc __mach_desc_##_type \ __attribute__((__section__(".arch.info.init"))) = { \ - .nr = MACH_TYPE_##_type, \ + .nr = MACH_TYPE_##_type, \ .name = _name, #define MACHINE_END \ -- GitLab From 90072059d2963dec237ae0cf49831ef77ddb5739 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:48:37 +0100 Subject: [PATCH 0471/1519] [ARM] Re-jig bootmem initialisation Make ARM independent of the way bootmem operates internally. We now map each node as we initialise it, and place the bootmem bitmap inside each node, rather than all in the first node. Signed-off-by: Russell King --- arch/arm/mm/init.c | 480 +++++++++++++++++++++--------------------- arch/arm/mm/mm-armv.c | 110 +--------- 2 files changed, 242 insertions(+), 348 deletions(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index edffa47a4b2a..d1f1ec73500f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mm/init.c * - * Copyright (C) 1995-2002 Russell King + * Copyright (C) 1995-2005 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -86,14 +86,19 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } -struct node_info { - unsigned int start; - unsigned int end; - int bootmap_pages; -}; +static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) +{ + return pmd_offset(pgd, virt); +} + +static inline pmd_t *pmd_off_k(unsigned long virt) +{ + return pmd_off(pgd_offset_k(virt), virt); +} -#define O_PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define O_PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT) +#define for_each_nodebank(iter,mi,no) \ + for (iter = 0; iter < mi->nr_banks; iter++) \ + if (mi->bank[iter].node == no) /* * FIXME: We really want to avoid allocating the bootmap bitmap @@ -106,15 +111,12 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) { unsigned int start_pfn, bank, bootmap_pfn; - start_pfn = O_PFN_UP(__pa(&_end)); + start_pfn = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT; bootmap_pfn = 0; - for (bank = 0; bank < mi->nr_banks; bank ++) { + for_each_nodebank(bank, mi, node) { unsigned int start, end; - if (mi->bank[bank].node != node) - continue; - start = mi->bank[bank].start >> PAGE_SHIFT; end = (mi->bank[bank].size + mi->bank[bank].start) >> PAGE_SHIFT; @@ -140,92 +142,6 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) return bootmap_pfn; } -/* - * Scan the memory info structure and pull out: - * - the end of memory - * - the number of nodes - * - the pfn range of each node - * - the number of bootmem bitmap pages - */ -static unsigned int __init -find_memend_and_nodes(struct meminfo *mi, struct node_info *np) -{ - unsigned int i, bootmem_pages = 0, memend_pfn = 0; - - for (i = 0; i < MAX_NUMNODES; i++) { - np[i].start = -1U; - np[i].end = 0; - np[i].bootmap_pages = 0; - } - - for (i = 0; i < mi->nr_banks; i++) { - unsigned long start, end; - int node; - - if (mi->bank[i].size == 0) { - /* - * Mark this bank with an invalid node number - */ - mi->bank[i].node = -1; - continue; - } - - node = mi->bank[i].node; - - /* - * Make sure we haven't exceeded the maximum number of nodes - * that we have in this configuration. If we have, we're in - * trouble. (maybe we ought to limit, instead of bugging?) - */ - if (node >= MAX_NUMNODES) - BUG(); - node_set_online(node); - - /* - * Get the start and end pfns for this bank - */ - start = mi->bank[i].start >> PAGE_SHIFT; - end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT; - - if (np[node].start > start) - np[node].start = start; - - if (np[node].end < end) - np[node].end = end; - - if (memend_pfn < end) - memend_pfn = end; - } - - /* - * Calculate the number of pages we require to - * store the bootmem bitmaps. - */ - for_each_online_node(i) { - if (np[i].end == 0) - continue; - - np[i].bootmap_pages = bootmem_bootmap_pages(np[i].end - - np[i].start); - bootmem_pages += np[i].bootmap_pages; - } - - high_memory = __va(memend_pfn << PAGE_SHIFT); - - /* - * This doesn't seem to be used by the Linux memory - * manager any more. If we can get rid of it, we - * also get rid of some of the stuff above as well. - * - * Note: max_low_pfn and max_pfn reflect the number - * of _pages_ in the system, not the maximum PFN. - */ - max_low_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET); - max_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET); - - return bootmem_pages; -} - static int __init check_initrd(struct meminfo *mi) { int initrd_node = -2; @@ -266,9 +182,8 @@ static int __init check_initrd(struct meminfo *mi) /* * Reserve the various regions of node 0 */ -static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int bootmap_pages) +static __init void reserve_node_zero(pg_data_t *pgdat) { - pg_data_t *pgdat = NODE_DATA(0); unsigned long res_size = 0; /* @@ -288,13 +203,6 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); - /* - * And don't forget to reserve the allocator bitmap, - * which will be freed later. - */ - reserve_bootmem_node(pgdat, bootmap_pfn << PAGE_SHIFT, - bootmap_pages << PAGE_SHIFT); - /* * Hmm... This should go elsewhere, but we really really need to * stop things allocating the low memory; ideally we need a better @@ -324,183 +232,276 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); } -/* - * Register all available RAM in this node with the bootmem allocator. - */ -static inline void free_bootmem_node_bank(int node, struct meminfo *mi) +void __init build_mem_type_table(void); +void __init create_mapping(struct map_desc *md); + +static unsigned long __init +bootmem_init_node(int node, int initrd_node, struct meminfo *mi) { - pg_data_t *pgdat = NODE_DATA(node); - int bank; + unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; + unsigned long start_pfn, end_pfn, boot_pfn; + unsigned int boot_pages; + pg_data_t *pgdat; + int i; - for (bank = 0; bank < mi->nr_banks; bank++) - if (mi->bank[bank].node == node) - free_bootmem_node(pgdat, mi->bank[bank].start, - mi->bank[bank].size); -} + start_pfn = -1UL; + end_pfn = 0; -/* - * Initialise the bootmem allocator for all nodes. This is called - * early during the architecture specific initialisation. - */ -static void __init bootmem_init(struct meminfo *mi) -{ - struct node_info node_info[MAX_NUMNODES], *np = node_info; - unsigned int bootmap_pages, bootmap_pfn, map_pg; - int node, initrd_node; + /* + * Calculate the pfn range, and map the memory banks for this node. + */ + for_each_nodebank(i, mi, node) { + unsigned long start, end; + struct map_desc map; - bootmap_pages = find_memend_and_nodes(mi, np); - bootmap_pfn = find_bootmap_pfn(0, mi, bootmap_pages); - initrd_node = check_initrd(mi); + start = mi->bank[i].start >> PAGE_SHIFT; + end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT; - map_pg = bootmap_pfn; + if (start_pfn > start) + start_pfn = start; + if (end_pfn < end) + end_pfn = end; + + map.physical = mi->bank[i].start; + map.virtual = __phys_to_virt(map.physical); + map.length = mi->bank[i].size; + map.type = MT_MEMORY; + + create_mapping(&map); + } /* - * Initialise the bootmem nodes. - * - * What we really want to do is: - * - * unmap_all_regions_except_kernel(); - * for_each_node_in_reverse_order(node) { - * map_node(node); - * allocate_bootmem_map(node); - * init_bootmem_node(node); - * free_bootmem_node(node); - * } - * - * but this is a 2.5-type change. For now, we just set - * the nodes up in reverse order. - * - * (we could also do with rolling bootmem_init and paging_init - * into one generic "memory_init" type function). + * If there is no memory in this node, ignore it. */ - np += num_online_nodes() - 1; - for (node = num_online_nodes() - 1; node >= 0; node--, np--) { - /* - * If there are no pages in this node, ignore it. - * Note that node 0 must always have some pages. - */ - if (np->end == 0 || !node_online(node)) { - if (node == 0) - BUG(); - continue; - } + if (end_pfn == 0) + return end_pfn; - /* - * Initialise the bootmem allocator. - */ - init_bootmem_node(NODE_DATA(node), map_pg, np->start, np->end); - free_bootmem_node_bank(node, mi); - map_pg += np->bootmap_pages; + /* + * Allocate the bootmem bitmap page. + */ + boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); + boot_pfn = find_bootmap_pfn(node, mi, boot_pages); - /* - * If this is node 0, we need to reserve some areas ASAP - - * we may use bootmem on node 0 to setup the other nodes. - */ - if (node == 0) - reserve_node_zero(bootmap_pfn, bootmap_pages); - } + /* + * Initialise the bootmem allocator for this node, handing the + * memory banks over to bootmem. + */ + node_set_online(node); + pgdat = NODE_DATA(node); + init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn); + for_each_nodebank(i, mi, node) + free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size); + + /* + * Reserve the bootmem bitmap for this node. + */ + reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, + boot_pages << PAGE_SHIFT); #ifdef CONFIG_BLK_DEV_INITRD - if (phys_initrd_size && initrd_node >= 0) { - reserve_bootmem_node(NODE_DATA(initrd_node), phys_initrd_start, + /* + * If the initrd is in this node, reserve its memory. + */ + if (node == initrd_node) { + reserve_bootmem_node(pgdat, phys_initrd_start, phys_initrd_size); initrd_start = __phys_to_virt(phys_initrd_start); initrd_end = initrd_start + phys_initrd_size; } #endif - BUG_ON(map_pg != bootmap_pfn + bootmap_pages); + /* + * Finally, reserve any node zero regions. + */ + if (node == 0) + reserve_node_zero(pgdat); + + /* + * initialise the zones within this node. + */ + memset(zone_size, 0, sizeof(zone_size)); + memset(zhole_size, 0, sizeof(zhole_size)); + + /* + * The size of this node has already been determined. If we need + * to do anything fancy with the allocation of this memory to the + * zones, now is the time to do it. + */ + zone_size[0] = end_pfn - start_pfn; + + /* + * For each bank in this node, calculate the size of the holes. + * holes = node_size - sum(bank_sizes_in_node) + */ + zhole_size[0] = zone_size[0]; + for_each_nodebank(i, mi, node) + zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT; + + /* + * Adjust the sizes according to any special requirements for + * this machine type. + */ + arch_adjust_zones(node, zone_size, zhole_size); + + free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size); + + return end_pfn; } -/* - * paging_init() sets up the page tables, initialises the zone memory - * maps, and sets up the zero page, bad page and bad page tables. - */ -void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +static void __init bootmem_init(struct meminfo *mi) { - void *zero_page; - int node; + unsigned long addr, memend_pfn = 0; + int node, initrd_node, i; - bootmem_init(mi); + /* + * Invalidate the node number for empty or invalid memory banks + */ + for (i = 0; i < mi->nr_banks; i++) + if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES) + mi->bank[i].node = -1; memcpy(&meminfo, mi, sizeof(meminfo)); +#ifdef CONFIG_XIP_KERNEL +#error needs fixing + p->physical = CONFIG_XIP_PHYS_ADDR & PMD_MASK; + p->virtual = (unsigned long)&_stext & PMD_MASK; + p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK; + p->type = MT_ROM; + p ++; +#endif + /* - * allocate the zero page. Note that we count on this going ok. + * Clear out all the mappings below the kernel image. + * FIXME: what about XIP? */ - zero_page = alloc_bootmem_low_pages(PAGE_SIZE); + for (addr = 0; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); /* - * initialise the page tables. + * Clear out all the kernel space mappings, except for the first + * memory bank, up to the end of the vmalloc region. */ - memtable_init(mi); - if (mdesc->map_io) - mdesc->map_io(); - local_flush_tlb_all(); + for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); + addr < VMALLOC_END; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); /* - * initialise the zones within each node + * Locate which node contains the ramdisk image, if any. */ - for_each_online_node(node) { - unsigned long zone_size[MAX_NR_ZONES]; - unsigned long zhole_size[MAX_NR_ZONES]; - struct bootmem_data *bdata; - pg_data_t *pgdat; - int i; + initrd_node = check_initrd(mi); - /* - * Initialise the zone size information. - */ - for (i = 0; i < MAX_NR_ZONES; i++) { - zone_size[i] = 0; - zhole_size[i] = 0; - } + /* + * Run through each node initialising the bootmem allocator. + */ + for_each_node(node) { + unsigned long end_pfn; - pgdat = NODE_DATA(node); - bdata = pgdat->bdata; + end_pfn = bootmem_init_node(node, initrd_node, mi); /* - * The size of this node has already been determined. - * If we need to do anything fancy with the allocation - * of this memory to the zones, now is the time to do - * it. + * Remember the highest memory PFN. */ - zone_size[0] = bdata->node_low_pfn - - (bdata->node_boot_start >> PAGE_SHIFT); + if (end_pfn > memend_pfn) + memend_pfn = end_pfn; + } - /* - * If this zone has zero size, skip it. - */ - if (!zone_size[0]) - continue; + high_memory = __va(memend_pfn << PAGE_SHIFT); - /* - * For each bank in this node, calculate the size of the - * holes. holes = node_size - sum(bank_sizes_in_node) - */ - zhole_size[0] = zone_size[0]; - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].node != node) - continue; + /* + * This doesn't seem to be used by the Linux memory manager any + * more, but is used by ll_rw_block. If we can get rid of it, we + * also get rid of some of the stuff above as well. + * + * Note: max_low_pfn and max_pfn reflect the number of _pages_ in + * the system, not the maximum PFN. + */ + max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; +} - zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT; - } +/* + * Set up device the mappings. Since we clear out the page tables for all + * mappings above VMALLOC_END, we will remove any debug device mappings. + * This means you have to be careful how you debug this function, or any + * called function. (Do it by code inspection!) + */ +static void __init devicemaps_init(struct machine_desc *mdesc) +{ + struct map_desc map; + unsigned long addr; + void *vectors; - /* - * Adjust the sizes according to any special - * requirements for this machine type. - */ - arch_adjust_zones(node, zone_size, zhole_size); + for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); - free_area_init_node(node, pgdat, zone_size, - bdata->node_boot_start >> PAGE_SHIFT, zhole_size); + /* + * Map the cache flushing regions. + */ +#ifdef FLUSH_BASE + map.physical = FLUSH_BASE_PHYS; + map.virtual = FLUSH_BASE; + map.length = PGDIR_SIZE; + map.type = MT_CACHECLEAN; + create_mapping(&map); +#endif +#ifdef FLUSH_BASE_MINICACHE + map.physical = FLUSH_BASE_PHYS + PGDIR_SIZE; + map.virtual = FLUSH_BASE_MINICACHE; + map.length = PGDIR_SIZE; + map.type = MT_MINICLEAN; + create_mapping(&map); +#endif + + flush_cache_all(); + local_flush_tlb_all(); + + vectors = alloc_bootmem_low_pages(PAGE_SIZE); + BUG_ON(!vectors); + + /* + * Create a mapping for the machine vectors at the high-vectors + * location (0xffff0000). If we aren't using high-vectors, also + * create a mapping at the low-vectors virtual address. + */ + map.physical = virt_to_phys(vectors); + map.virtual = 0xffff0000; + map.length = PAGE_SIZE; + map.type = MT_HIGH_VECTORS; + create_mapping(&map); + + if (!vectors_high()) { + map.virtual = 0; + map.type = MT_LOW_VECTORS; + create_mapping(&map); } /* - * finish off the bad pages once - * the mem_map is initialised + * Ask the machine support to map in the statically mapped devices. + * After this point, we can start to touch devices again. + */ + if (mdesc->map_io) + mdesc->map_io(); +} + +/* + * paging_init() sets up the page tables, initialises the zone memory + * maps, and sets up the zero page, bad page and bad page tables. + */ +void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +{ + void *zero_page; + + build_mem_type_table(); + bootmem_init(mi); + devicemaps_init(mdesc); + + top_pmd = pmd_off_k(0xffff0000); + + /* + * allocate the zero page. Note that we count on this going ok. */ + zero_page = alloc_bootmem_low_pages(PAGE_SIZE); memzero(zero_page, PAGE_SIZE); empty_zero_page = virt_to_page(zero_page); flush_dcache_page(empty_zero_page); @@ -562,10 +563,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi) * may not be the case, especially if the user has provided the * information on the command line. */ - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0 || mi->bank[i].node != node) - continue; - + for_each_nodebank(i, mi, node) { bank_start = mi->bank[i].start >> PAGE_SHIFT; if (bank_start < prev_bank_end) { printk(KERN_ERR "MEM: unordered memory banks. " diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index d125a3dc061c..c626361c0f5e 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mm/mm-armv.c * - * Copyright (C) 1998-2002 Russell King + * Copyright (C) 1998-2005 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -305,16 +305,6 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot)); } -/* - * Clear any PGD mapping. On a two-level page table system, - * the clearance is done by the middle-level functions (pmd) - * rather than the top-level (pgd) functions. - */ -static inline void clear_mapping(unsigned long virt) -{ - pmd_clear(pmd_off_k(virt)); -} - struct mem_types { unsigned int prot_pte; unsigned int prot_l1; @@ -373,7 +363,7 @@ static struct mem_types mem_types[] __initdata = { /* * Adjust the PMD section entries according to the CPU in use. */ -static void __init build_mem_type_table(void) +void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); @@ -483,7 +473,7 @@ static void __init build_mem_type_table(void) * offsets, and we take full advantage of sections and * supersections. */ -static void __init create_mapping(struct map_desc *md) +void __init create_mapping(struct map_desc *md) { unsigned long virt, length; int prot_sect, prot_l1, domain; @@ -601,100 +591,6 @@ void setup_mm_for_reboot(char mode) } } -extern void _stext, _etext; - -/* - * Setup initial mappings. We use the page we allocated for zero page to hold - * the mappings, which will get overwritten by the vectors in traps_init(). - * The mappings must be in virtual address order. - */ -void __init memtable_init(struct meminfo *mi) -{ - struct map_desc *init_maps, *p, *q; - unsigned long address = 0; - int i; - - build_mem_type_table(); - - init_maps = p = alloc_bootmem_low_pages(PAGE_SIZE); - -#ifdef CONFIG_XIP_KERNEL - p->physical = CONFIG_XIP_PHYS_ADDR & PMD_MASK; - p->virtual = (unsigned long)&_stext & PMD_MASK; - p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK; - p->type = MT_ROM; - p ++; -#endif - - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0) - continue; - - p->physical = mi->bank[i].start; - p->virtual = __phys_to_virt(p->physical); - p->length = mi->bank[i].size; - p->type = MT_MEMORY; - p ++; - } - -#ifdef FLUSH_BASE - p->physical = FLUSH_BASE_PHYS; - p->virtual = FLUSH_BASE; - p->length = PGDIR_SIZE; - p->type = MT_CACHECLEAN; - p ++; -#endif - -#ifdef FLUSH_BASE_MINICACHE - p->physical = FLUSH_BASE_PHYS + PGDIR_SIZE; - p->virtual = FLUSH_BASE_MINICACHE; - p->length = PGDIR_SIZE; - p->type = MT_MINICLEAN; - p ++; -#endif - - /* - * Go through the initial mappings, but clear out any - * pgdir entries that are not in the description. - */ - q = init_maps; - do { - if (address < q->virtual || q == p) { - clear_mapping(address); - address += PGDIR_SIZE; - } else { - create_mapping(q); - - address = q->virtual + q->length; - address = (address + PGDIR_SIZE - 1) & PGDIR_MASK; - - q ++; - } - } while (address != 0); - - /* - * Create a mapping for the machine vectors at the high-vectors - * location (0xffff0000). If we aren't using high-vectors, also - * create a mapping at the low-vectors virtual address. - */ - init_maps->physical = virt_to_phys(init_maps); - init_maps->virtual = 0xffff0000; - init_maps->length = PAGE_SIZE; - init_maps->type = MT_HIGH_VECTORS; - create_mapping(init_maps); - - if (!vectors_high()) { - init_maps->virtual = 0; - init_maps->type = MT_LOW_VECTORS; - create_mapping(init_maps); - } - - flush_cache_all(); - local_flush_tlb_all(); - - top_pmd = pmd_off_k(0xffff0000); -} - /* * Create the architecture specific mappings */ -- GitLab From b5893c56ca7e664aef010a71c2638db768d4e996 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:51:15 +0100 Subject: [PATCH 0472/1519] [ARM] 1/4 Move oprofile driver model code Signed-off-by: Russell King --- arch/arm/oprofile/common.c | 99 ++++++++++++++++++-------------------- 1 file changed, 47 insertions(+), 52 deletions(-) diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index e57dde882898..5b1d752edbc3 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,8 +10,8 @@ #include #include #include -#include #include +#include #include "op_counter.h" #include "op_arm_model.h" @@ -20,57 +20,6 @@ static struct op_arm_model_spec *pmu_model; static int pmu_enabled; static struct semaphore pmu_sem; -static int pmu_start(void); -static int pmu_setup(void); -static void pmu_stop(void); -static int pmu_create_files(struct super_block *, struct dentry *); - -#ifdef CONFIG_PM -static int pmu_suspend(struct sys_device *dev, pm_message_t state) -{ - if (pmu_enabled) - pmu_stop(); - return 0; -} - -static int pmu_resume(struct sys_device *dev) -{ - if (pmu_enabled) - pmu_start(); - return 0; -} - -static struct sysdev_class oprofile_sysclass = { - set_kset_name("oprofile"), - .resume = pmu_resume, - .suspend = pmu_suspend, -}; - -static struct sys_device device_oprofile = { - .id = 0, - .cls = &oprofile_sysclass, -}; - -static int __init init_driverfs(void) -{ - int ret; - - if (!(ret = sysdev_class_register(&oprofile_sysclass))) - ret = sysdev_register(&device_oprofile); - - return ret; -} - -static void exit_driverfs(void) -{ - sysdev_unregister(&device_oprofile); - sysdev_class_unregister(&oprofile_sysclass); -} -#else -#define init_driverfs() do { } while (0) -#define exit_driverfs() do { } while (0) -#endif /* CONFIG_PM */ - struct op_counter_config counter_config[OP_MAX_COUNTER]; static int pmu_create_files(struct super_block *sb, struct dentry *root) @@ -126,6 +75,52 @@ static void pmu_stop(void) up(&pmu_sem); } +#ifdef CONFIG_PM +static int pmu_suspend(struct sys_device *dev, pm_message_t state) +{ + if (pmu_enabled) + pmu_stop(); + return 0; +} + +static int pmu_resume(struct sys_device *dev) +{ + if (pmu_enabled) + pmu_start(); + return 0; +} + +static struct sysdev_class oprofile_sysclass = { + set_kset_name("oprofile"), + .resume = pmu_resume, + .suspend = pmu_suspend, +}; + +static struct sys_device device_oprofile = { + .id = 0, + .cls = &oprofile_sysclass, +}; + +static int __init init_driverfs(void) +{ + int ret; + + if (!(ret = sysdev_class_register(&oprofile_sysclass))) + ret = sysdev_register(&device_oprofile); + + return ret; +} + +static void exit_driverfs(void) +{ + sysdev_unregister(&device_oprofile); + sysdev_class_unregister(&oprofile_sysclass); +} +#else +#define init_driverfs() do { } while (0) +#define exit_driverfs() do { } while (0) +#endif /* CONFIG_PM */ + int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec) { init_MUTEX(&pmu_sem); -- GitLab From 7c5b3fc20807279d8f8e78f1e2ef275128668796 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:52:30 +0100 Subject: [PATCH 0473/1519] [ARM] 2/4 Fix oprofile suspend/resume The oprofile suspend/resume was missing locking. If we failed to start oprofile on resume, we still reported that it was enabled. Instead, disable oprofile on error. Signed-off-by: Russell King --- arch/arm/oprofile/common.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 5b1d752edbc3..02e5d6f45166 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -78,15 +78,19 @@ static void pmu_stop(void) #ifdef CONFIG_PM static int pmu_suspend(struct sys_device *dev, pm_message_t state) { + down(&pmu_sem); if (pmu_enabled) - pmu_stop(); + pmu_model->stop(); + up(&pmu_sem); return 0; } static int pmu_resume(struct sys_device *dev) { - if (pmu_enabled) - pmu_start(); + down(&pmu_sem); + if (pmu_enabled && pmu_model->start()) + pmu_enabled = 0; + up(&pmu_sem); return 0; } -- GitLab From 55f052341ff75e5815b1f7f4d2d3b69314ea8712 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:54:21 +0100 Subject: [PATCH 0474/1519] [ARM] 3/4 Rename common oprofile code The common oprofile code assumes the name "PMU" (from Intel's performance management unit). This is misleading when we start adding oprofile support for other machine types which don't use the same terminology. Call it op_arm_* instead of pmu_*. Signed-off-by: Russell King --- arch/arm/oprofile/common.c | 88 ++++++++++++++++---------------- arch/arm/oprofile/init.c | 4 +- arch/arm/oprofile/op_arm_model.h | 4 +- 3 files changed, 48 insertions(+), 48 deletions(-) diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 02e5d6f45166..7ce6dfa06c85 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -16,17 +16,17 @@ #include "op_counter.h" #include "op_arm_model.h" -static struct op_arm_model_spec *pmu_model; -static int pmu_enabled; -static struct semaphore pmu_sem; +static struct op_arm_model_spec *op_arm_model; +static int op_arm_enabled; +static struct semaphore op_arm_sem; struct op_counter_config counter_config[OP_MAX_COUNTER]; -static int pmu_create_files(struct super_block *sb, struct dentry *root) +static int op_arm_create_files(struct super_block *sb, struct dentry *root) { unsigned int i; - for (i = 0; i < pmu_model->num_counters; i++) { + for (i = 0; i < op_arm_model->num_counters; i++) { struct dentry *dir; char buf[2]; @@ -43,61 +43,61 @@ static int pmu_create_files(struct super_block *sb, struct dentry *root) return 0; } -static int pmu_setup(void) +static int op_arm_setup(void) { int ret; spin_lock(&oprofilefs_lock); - ret = pmu_model->setup_ctrs(); + ret = op_arm_model->setup_ctrs(); spin_unlock(&oprofilefs_lock); return ret; } -static int pmu_start(void) +static int op_arm_start(void) { int ret = -EBUSY; - down(&pmu_sem); - if (!pmu_enabled) { - ret = pmu_model->start(); - pmu_enabled = !ret; + down(&op_arm_sem); + if (!op_arm_enabled) { + ret = op_arm_model->start(); + op_arm_enabled = !ret; } - up(&pmu_sem); + up(&op_arm_sem); return ret; } -static void pmu_stop(void) +static void op_arm_stop(void) { - down(&pmu_sem); - if (pmu_enabled) - pmu_model->stop(); - pmu_enabled = 0; - up(&pmu_sem); + down(&op_arm_sem); + if (op_arm_enabled) + op_arm_model->stop(); + op_arm_enabled = 0; + up(&op_arm_sem); } #ifdef CONFIG_PM -static int pmu_suspend(struct sys_device *dev, pm_message_t state) +static int op_arm_suspend(struct sys_device *dev, pm_message_t state) { - down(&pmu_sem); - if (pmu_enabled) - pmu_model->stop(); - up(&pmu_sem); + down(&op_arm_sem); + if (op_arm_enabled) + op_arm_model->stop(); + up(&op_arm_sem); return 0; } -static int pmu_resume(struct sys_device *dev) +static int op_arm_resume(struct sys_device *dev) { - down(&pmu_sem); - if (pmu_enabled && pmu_model->start()) - pmu_enabled = 0; - up(&pmu_sem); + down(&op_arm_sem); + if (op_arm_enabled && op_arm_model->start()) + op_arm_enabled = 0; + up(&op_arm_sem); return 0; } static struct sysdev_class oprofile_sysclass = { set_kset_name("oprofile"), - .resume = pmu_resume, - .suspend = pmu_suspend, + .resume = op_arm_resume, + .suspend = op_arm_suspend, }; static struct sys_device device_oprofile = { @@ -125,31 +125,31 @@ static void exit_driverfs(void) #define exit_driverfs() do { } while (0) #endif /* CONFIG_PM */ -int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec) +int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec) { - init_MUTEX(&pmu_sem); + init_MUTEX(&op_arm_sem); if (spec->init() < 0) return -ENODEV; - pmu_model = spec; + op_arm_model = spec; init_driverfs(); - ops->create_files = pmu_create_files; - ops->setup = pmu_setup; - ops->shutdown = pmu_stop; - ops->start = pmu_start; - ops->stop = pmu_stop; - ops->cpu_type = pmu_model->name; - printk(KERN_INFO "oprofile: using %s PMU\n", spec->name); + ops->create_files = op_arm_create_files; + ops->setup = op_arm_setup; + ops->shutdown = op_arm_stop; + ops->start = op_arm_start; + ops->stop = op_arm_stop; + ops->cpu_type = op_arm_model->name; + printk(KERN_INFO "oprofile: using %s\n", spec->name); return 0; } -void pmu_exit(void) +void op_arm_exit(void) { - if (pmu_model) { + if (op_arm_model) { exit_driverfs(); - pmu_model = NULL; + op_arm_model = NULL; } } diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c index d315a3a86c86..ccd8c54934a2 100644 --- a/arch/arm/oprofile/init.c +++ b/arch/arm/oprofile/init.c @@ -17,7 +17,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) int ret = -ENODEV; #ifdef CONFIG_CPU_XSCALE - ret = pmu_init(ops, &op_xscale_spec); + ret = op_arm_init(ops, &op_xscale_spec); #endif ops->backtrace = arm_backtrace; @@ -28,6 +28,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { #ifdef CONFIG_CPU_XSCALE - pmu_exit(); + op_arm_exit(); #endif } diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h index 2148d07484b7..38c6ad158547 100644 --- a/arch/arm/oprofile/op_arm_model.h +++ b/arch/arm/oprofile/op_arm_model.h @@ -26,6 +26,6 @@ extern struct op_arm_model_spec op_xscale_spec; extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth); -extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); -extern void pmu_exit(void); +extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); +extern void op_arm_exit(void); #endif /* OP_ARM_MODEL_H */ -- GitLab From c6b9dafce3e3b434a3e7ffd5072815c03d18cc84 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 14:56:04 +0100 Subject: [PATCH 0475/1519] [ARM] 4/4 Combine oprofile common and init code There is nothing special about having the init code separate from the common code, so combine the two. Signed-off-by: Russell King --- arch/arm/oprofile/Makefile | 4 ++-- arch/arm/oprofile/common.c | 44 +++++++++++++++++++++++--------------- arch/arm/oprofile/init.c | 33 ---------------------------- 3 files changed, 29 insertions(+), 52 deletions(-) delete mode 100644 arch/arm/oprofile/init.c diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile index 8ffb523e6c77..6a94e54848fd 100644 --- a/arch/arm/oprofile/Makefile +++ b/arch/arm/oprofile/Makefile @@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) init.o backtrace.o -oprofile-$(CONFIG_CPU_XSCALE) += common.o op_model_xscale.o +oprofile-y := $(DRIVER_OBJS) common.o backtrace.o +oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 7ce6dfa06c85..1415930ceee1 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -125,27 +125,37 @@ static void exit_driverfs(void) #define exit_driverfs() do { } while (0) #endif /* CONFIG_PM */ -int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec) +int __init oprofile_arch_init(struct oprofile_operations *ops) { - init_MUTEX(&op_arm_sem); - - if (spec->init() < 0) - return -ENODEV; - - op_arm_model = spec; - init_driverfs(); - ops->create_files = op_arm_create_files; - ops->setup = op_arm_setup; - ops->shutdown = op_arm_stop; - ops->start = op_arm_start; - ops->stop = op_arm_stop; - ops->cpu_type = op_arm_model->name; - printk(KERN_INFO "oprofile: using %s\n", spec->name); + struct op_arm_model_spec *spec = NULL; + int ret = -ENODEV; + +#ifdef CONFIG_CPU_XSCALE + spec = &op_xscale_spec; +#endif + + if (spec) { + init_MUTEX(&op_arm_sem); + + if (spec->init() < 0) + return -ENODEV; + + op_arm_model = spec; + init_driverfs(); + ops->create_files = op_arm_create_files; + ops->setup = op_arm_setup; + ops->shutdown = op_arm_stop; + ops->start = op_arm_start; + ops->stop = op_arm_stop; + ops->cpu_type = op_arm_model->name; + ops->backtrace = arm_backtrace; + printk(KERN_INFO "oprofile: using %s\n", spec->name); + } - return 0; + return ret; } -void op_arm_exit(void) +void oprofile_arch_exit(void) { if (op_arm_model) { exit_driverfs(); diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c deleted file mode 100644 index ccd8c54934a2..000000000000 --- a/arch/arm/oprofile/init.c +++ /dev/null @@ -1,33 +0,0 @@ -/** - * @file init.c - * - * @remark Copyright 2004 Oprofile Authors - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - */ - -#include -#include -#include -#include "op_arm_model.h" - -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - int ret = -ENODEV; - -#ifdef CONFIG_CPU_XSCALE - ret = op_arm_init(ops, &op_xscale_spec); -#endif - - ops->backtrace = arm_backtrace; - - return ret; -} - -void oprofile_arch_exit(void) -{ -#ifdef CONFIG_CPU_XSCALE - op_arm_exit(); -#endif -} -- GitLab From f70cd65658388ca2a06071bdbd8a5a6beac5aa47 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:18:56 +0100 Subject: [PATCH 0476/1519] [ARM] 2982/1: Replace map_desc.physical with map_desc.pfn: aaec2000 Patch from Deepak Saxena aaec2000 map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-aaec2000/core.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index aece0cd4f0a3..9be6c3213254 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -40,9 +40,17 @@ * default mapping provided here. */ static struct map_desc standard_io_desc[] __initdata = { - /* virtual physical length type */ - { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE }, - { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE } + { + .virtual = VIO_APB_BASE, + .physical = __phys_to_pfn(PIO_APB_BASE), + .length = IO_APB_LENGTH, + .type = MT_DEVICE + }, { + .virtual = VIO_AHB_BASE, + .physical = __phys_to_pfn(PIO_AHB_BASE), + .length = IO_AHB_LENGTH, + .type = MT_DEVICE + } }; void __init aaec2000_map_io(void) -- GitLab From 4835e64a5f44366e97dde9b6e26ede2ec16249da Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:18:57 +0100 Subject: [PATCH 0477/1519] [ARM] 2983/1: Replace map_desc.physical with map_desc.pfn: IOP3xx Patch from Deepak Saxena IOP3xx map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-iop3xx/iop321-setup.c | 18 +++++++++++------- arch/arm/mach-iop3xx/iop331-setup.c | 18 +++++++++++------- arch/arm/mach-iop3xx/iq31244-mm.c | 10 ++++++---- arch/arm/mach-iop3xx/iq80321-mm.c | 10 ++++++---- 4 files changed, 34 insertions(+), 22 deletions(-) diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c index 0f921ba2750c..bb5091223b63 100644 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ b/arch/arm/mach-iop3xx/iop321-setup.c @@ -38,13 +38,17 @@ * Standard IO mapping for all IOP321 based systems */ static struct map_desc iop321_std_desc[] __initdata = { - /* virtual physical length type */ - - /* mem mapped registers */ - { IOP321_VIRT_MEM_BASE, IOP321_PHYS_MEM_BASE, 0x00002000, MT_DEVICE }, - - /* PCI IO space */ - { IOP321_PCI_LOWER_IO_VA, IOP321_PCI_LOWER_IO_PA, IOP321_PCI_IO_WINDOW_SIZE, MT_DEVICE } + { /* mem mapped registers */ + .virtual = IOP321_VIRT_MEM_BASE, + .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE), + .length = 0x00002000, + .type = MT_DEVICE + }, { /* PCI IO space */ + .virtual = IOP321_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA), + .length = IOP321_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE + } }; #ifdef CONFIG_ARCH_IQ80321 diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index fc74b722f72f..a2533c3ab42f 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -37,13 +37,17 @@ * Standard IO mapping for all IOP331 based systems */ static struct map_desc iop331_std_desc[] __initdata = { - /* virtual physical length type */ - - /* mem mapped registers */ - { IOP331_VIRT_MEM_BASE, IOP331_PHYS_MEM_BASE, 0x00002000, MT_DEVICE }, - - /* PCI IO space */ - { IOP331_PCI_LOWER_IO_VA, IOP331_PCI_LOWER_IO_PA, IOP331_PCI_IO_WINDOW_SIZE, MT_DEVICE } + { /* mem mapped registers */ + .virtual = IOP331_VIRT_MEM_BASE, + .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE), + .length = 0x00002000, + .type = MT_DEVICE + }, { /* PCI IO space */ + .virtual = IOP331_PCI_LOWER_IO_VA, + .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA), + .length = IOP331_PCI_IO_WINDOW_SIZE, + .type = MT_DEVICE + } }; static struct uart_port iop331_serial_ports[] = { diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c index 55992ab586ba..e874b54eefe3 100644 --- a/arch/arm/mach-iop3xx/iq31244-mm.c +++ b/arch/arm/mach-iop3xx/iq31244-mm.c @@ -29,10 +29,12 @@ * We use RedBoot's setup for the onboard devices. */ static struct map_desc iq31244_io_desc[] __initdata = { - /* virtual physical length type */ - - /* on-board devices */ - { IQ31244_UART, IQ31244_UART, 0x00100000, MT_DEVICE } + { /* on-board devices */ + .virtual = IQ31244_UART, + .pfn = __phys_to_pfn(IQ31244_UART), + .length = 0x00100000, + .type = MT_DEVICE + } }; void __init iq31244_map_io(void) diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c index bb3e9e5a9aff..d9cac5e1fc3d 100644 --- a/arch/arm/mach-iop3xx/iq80321-mm.c +++ b/arch/arm/mach-iop3xx/iq80321-mm.c @@ -29,10 +29,12 @@ * We use RedBoot's setup for the onboard devices. */ static struct map_desc iq80321_io_desc[] __initdata = { - /* virtual physical length type */ - - /* on-board devices */ - { IQ80321_UART, IQ80321_UART, 0x00100000, MT_DEVICE } + { /* on-board devices */ + .virtual = IQ80321_UART, + .pfn = __phys_to_pfn(IQ80321_UART), + .length = 0x00100000, + .type = MT_DEVICE + } }; void __init iq80321_map_io(void) -- GitLab From db0d087e34d251254f6349e607c2a2ec295cd90b Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:18:58 +0100 Subject: [PATCH 0478/1519] [ARM] 2984/1: Replace map_desc.physical with map_desc.pfn: IXP2000 Patch from Deepak Saxena IXP2000 map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp2000/core.c | 16 ++++++++-------- arch/arm/mach-ixp2000/ixdp2x00.c | 2 +- arch/arm/mach-ixp2000/ixdp2x01.c | 2 +- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index f4d7f1f6ef85..01c393c504d0 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -83,42 +83,42 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg) static struct map_desc ixp2000_io_desc[] __initdata = { { .virtual = IXP2000_CAP_VIRT_BASE, - .physical = IXP2000_CAP_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), .length = IXP2000_CAP_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_INTCTL_VIRT_BASE, - .physical = IXP2000_INTCTL_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), .length = IXP2000_INTCTL_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_CREG_VIRT_BASE, - .physical = IXP2000_PCI_CREG_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), .length = IXP2000_PCI_CREG_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_CSR_VIRT_BASE, - .physical = IXP2000_PCI_CSR_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), .length = IXP2000_PCI_CSR_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_MSF_VIRT_BASE, - .physical = IXP2000_MSF_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), .length = IXP2000_MSF_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, - .physical = IXP2000_PCI_IO_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), .length = IXP2000_PCI_IO_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_CFG0_VIRT_BASE, - .physical = IXP2000_PCI_CFG0_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), .length = IXP2000_PCI_CFG0_SIZE, .type = MT_DEVICE }, { .virtual = IXP2000_PCI_CFG1_VIRT_BASE, - .physical = IXP2000_PCI_CFG1_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), .length = IXP2000_PCI_CFG1_SIZE, .type = MT_DEVICE } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 63ba0191aa65..8b4a839b6279 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -176,7 +176,7 @@ void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *************************************************************************/ static struct map_desc ixdp2x00_io_desc __initdata = { .virtual = IXDP2X00_VIRT_CPLD_BASE, - .physical = IXDP2X00_PHYS_CPLD_BASE, + .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE), .length = IXDP2X00_CPLD_SIZE, .type = MT_DEVICE }; diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 7a5109921287..fee1d7b73503 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -136,7 +136,7 @@ void __init ixdp2x01_init_irq(void) *************************************************************************/ static struct map_desc ixdp2x01_io_desc __initdata = { .virtual = IXDP2X01_VIRT_CPLD_BASE, - .physical = IXDP2X01_PHYS_CPLD_BASE, + .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE), .length = IXDP2X01_CPLD_REGION_SIZE, .type = MT_DEVICE }; -- GitLab From 87fe04bd2a39f263211cc232da9f4f094eaffea0 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:18:59 +0100 Subject: [PATCH 0479/1519] [ARM] 2985/1: Replace map_desc.physical with map_desc.pfn: IXP4xx Patch from Deepak Saxena IXP4xx map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 36b6045213ee..6c396447c4e0 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -44,24 +44,24 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ .virtual = IXP4XX_PERIPHERAL_BASE_VIRT, - .physical = IXP4XX_PERIPHERAL_BASE_PHYS, + .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), .length = IXP4XX_PERIPHERAL_REGION_SIZE, .type = MT_DEVICE }, { /* Expansion Bus Config Registers */ .virtual = IXP4XX_EXP_CFG_BASE_VIRT, - .physical = IXP4XX_EXP_CFG_BASE_PHYS, + .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), .length = IXP4XX_EXP_CFG_REGION_SIZE, .type = MT_DEVICE }, { /* PCI Registers */ .virtual = IXP4XX_PCI_CFG_BASE_VIRT, - .physical = IXP4XX_PCI_CFG_BASE_PHYS, + .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE }, #ifdef CONFIG_DEBUG_LL { /* Debug UART mapping */ .virtual = IXP4XX_DEBUG_UART_BASE_VIRT, - .physical = IXP4XX_DEBUG_UART_BASE_PHYS, + .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), .length = IXP4XX_DEBUG_UART_REGION_SIZE, .type = MT_DEVICE } -- GitLab From 36d28c03d17506dd30aeed9d68a4023f3e7631dc Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:18:59 +0100 Subject: [PATCH 0480/1519] [ARM] 2986/1: Replace map_desc.physical with map_desc.pfn: LH7A40x Patch from Deepak Saxena LH7A40x map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-lh7a40x/arch-kev7a400.c | 13 +++- arch/arm/mach-lh7a40x/arch-lpd7a40x.c | 86 ++++++++++++++++++++++----- 2 files changed, 82 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index cb3dcd3bd00a..19f2fa2244c4 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -26,8 +26,17 @@ /* This function calls the board specific IRQ initialization function. */ static struct map_desc kev7a400_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, - { CPLD_VIRT, CPLD_PHYS, CPLD_SIZE, MT_DEVICE }, + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD_VIRT, + .pfn = __phys_to_pfn(CPLD_PHYS), + .length = CPLD_SIZE, + .type = MT_DEVICE + } }; void __init kev7a400_map_io(void) diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c index 6eb61a17c63b..a20eabc132b0 100644 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c @@ -227,23 +227,79 @@ void __init lh7a40x_init_board_irq (void) } static struct map_desc lpd7a400_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, - /* Mapping added to work around chip select problems */ - { IOBARRIER_VIRT, IOBARRIER_PHYS, IOBARRIER_SIZE, MT_DEVICE }, - { CF_VIRT, CF_PHYS, CF_SIZE, MT_DEVICE }, + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, { /* Mapping added to work around chip select problems */ + .virtual = IOBARRIER_VIRT, + .pfn = __phys_to_pfn(IOBARRIER_PHYS), + .length = IOBARRIER_SIZE, + .type = MT_DEVICE + }, { + .virtual = CF_VIRT, + .pfn = __phys_to_pfn(CF_PHYS), + .length = CF_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD02_VIRT, + .pfn = __phys_to_pfn(CPLD02_PHYS), + .length = CPLD02_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD06_VIRT, + .pfn = __phys_to_pfn(CPLD06_PHYS), + .length = CPLD06_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD08_VIRT, + .pfn = __phys_to_pfn(CPLD08_PHYS), + .length = CPLD08_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD0C_VIRT, + .pfn = __phys_to_pfn(CPLD0C_PHYS), + .length = CPLD0C_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD0E_VIRT, + .pfn = __phys_to_pfn(CPLD0E_PHYS), + .length = CPLD0E_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD10_VIRT, + .pfn = __phys_to_pfn(CPLD10_PHYS), + .length = CPLD10_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD12_VIRT, + .pfn = __phys_to_pfn(CPLD12_PHYS), + .length = CPLD12_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD14_VIRT, + .pfn = __phys_to_pfn(CPLD14_PHYS), + .length = CPLD14_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD16_VIRT, + .pfn = __phys_to_pfn(CPLD16_PHYS), + .length = CPLD16_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD18_VIRT, + .pfn = __phys_to_pfn(CPLD18_PHYS), + .length = CPLD18_SIZE, + .type = MT_DEVICE + }, { + .virtual = CPLD1A_VIRT, + .pfn = __phys_to_pfn(CPLD1A_PHYS), + .length = CPLD1A_SIZE, + .type = MT_DEVICE + }, /* This mapping is redundant since the smc driver performs another. */ /* { CPLD00_VIRT, CPLD00_PHYS, CPLD00_SIZE, MT_DEVICE }, */ - { CPLD02_VIRT, CPLD02_PHYS, CPLD02_SIZE, MT_DEVICE }, - { CPLD06_VIRT, CPLD06_PHYS, CPLD06_SIZE, MT_DEVICE }, - { CPLD08_VIRT, CPLD08_PHYS, CPLD08_SIZE, MT_DEVICE }, - { CPLD0C_VIRT, CPLD0C_PHYS, CPLD0C_SIZE, MT_DEVICE }, - { CPLD0E_VIRT, CPLD0E_PHYS, CPLD0E_SIZE, MT_DEVICE }, - { CPLD10_VIRT, CPLD10_PHYS, CPLD10_SIZE, MT_DEVICE }, - { CPLD12_VIRT, CPLD12_PHYS, CPLD12_SIZE, MT_DEVICE }, - { CPLD14_VIRT, CPLD14_PHYS, CPLD14_SIZE, MT_DEVICE }, - { CPLD16_VIRT, CPLD16_PHYS, CPLD16_SIZE, MT_DEVICE }, - { CPLD18_VIRT, CPLD18_PHYS, CPLD18_SIZE, MT_DEVICE }, - { CPLD1A_VIRT, CPLD1A_PHYS, CPLD1A_SIZE, MT_DEVICE }, }; void __init -- GitLab From 9fe133b149e8a48742a64b72f22041bcd31fe827 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:00 +0100 Subject: [PATCH 0481/1519] [ARM] 2987/1: Replace map_desc.physical with map_desc.pfn: OMAP Patch from Deepak Saxena OMAP map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-omap1/board-innovator.c | 8 +++-- arch/arm/mach-omap1/board-perseus2.c | 8 +++-- arch/arm/mach-omap1/io.c | 46 +++++++++++++++++++++++---- arch/arm/plat-omap/sram.c | 6 +++- 4 files changed, 56 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index df0312b596e4..fd9183ff2ed5 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -103,8 +103,12 @@ static struct platform_device innovator_flash_device = { /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc innovator1510_io_desc[] __initdata = { -{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE, - MT_DEVICE }, + { + .virtual = OMAP1510_FPGA_BASE, + .pfn = __phys_to_pfn(OMAP1510_FPGA_START), + .length = OMAP1510_FPGA_SIZE, + .type = MT_DEVICE + } }; static struct resource innovator1510_smc91x_resources[] = { diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 107c68c8ab54..2ba26e239108 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -134,8 +134,12 @@ void omap_perseus2_init_irq(void) /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { - {H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE, - MT_DEVICE}, + { + .virtual = H2P2_DBG_FPGA_BASE, + .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), + .length = H2P2_DBG_FPGA_SIZE, + .type = MT_DEVICE + } }; static void __init omap_perseus2_map_io(void) diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index eb8261d7dead..79fb86535ebc 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -26,27 +26,59 @@ extern void omap_sram_init(void); * default mapping provided here. */ static struct map_desc omap_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + } }; #ifdef CONFIG_ARCH_OMAP730 static struct map_desc omap730_io_desc[] __initdata = { - { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE }, - { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE }, + { + .virtual = OMAP730_DSP_BASE, + .pfn = __phys_to_pfn(OMAP730_DSP_START), + .length = OMAP730_DSP_SIZE, + .type = MT_DEVICE + }, { + .virtual = OMAP730_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP730_DSPREG_START), + .length = OMAP730_DSPREG_SIZE, + .type = MT_DEVICE + } }; #endif #ifdef CONFIG_ARCH_OMAP1510 static struct map_desc omap1510_io_desc[] __initdata = { - { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE }, - { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE }, + { + .virtual = OMAP1510_DSP_BASE, + .pfn = __phys_to_pfn(OMAP1510_DSP_START), + .length = OMAP1510_DSP_SIZE, + .type = MT_DEVICE + }, { + .virtual = OMAP1510_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP1510_DSPREG_START), + .length = OMAP1510_DSPREG_SIZE, + .type = MT_DEVICE + } }; #endif #if defined(CONFIG_ARCH_OMAP16XX) static struct map_desc omap16xx_io_desc[] __initdata = { - { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE }, - { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE }, + { + .virtual = OMAP16XX_DSP_BASE, + .pfn = __phys_to_pfn(OMAP16XX_DSP_START), + .length = OMAP16XX_DSP_SIZE, + .type = MT_DEVICE + }, { + .virtual = OMAP16XX_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP16XX_DSPREG_START), + .length = OMAP16XX_DSPREG_SIZE, + .type = MT_DEVICE + } }; #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 7719a4062e3a..7ad69f14a3e7 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -59,7 +59,11 @@ void __init omap_detect_sram(void) } static struct map_desc omap_sram_io_desc[] __initdata = { - { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE } + { /* .length gets filled in at runtime */ + .virtual = OMAP1_SRAM_BASE, + .pfn = __phys_to_pfn(OMAP1_SRAM_START), + .type = MT_DEVICE + } }; /* -- GitLab From 6f9182eb32a4e6c46813928bee50df71e3fd1c74 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:01 +0100 Subject: [PATCH 0482/1519] [ARM] 2988/1: Replace map_desc.physical with map_desc.pfn: PXA Patch from Deepak Saxena PXA map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 44 ++++++++++++++++++++++++++++------- arch/arm/mach-pxa/idp.c | 21 +++++++++-------- arch/arm/mach-pxa/lubbock.c | 7 +++++- arch/arm/mach-pxa/mainstone.c | 7 +++++- 4 files changed, 59 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 1d7677669a76..2e9e1702c4b3 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -92,14 +92,42 @@ EXPORT_SYMBOL(pxa_set_cken); * and cache flush area. */ static struct map_desc standard_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf2000000, 0x40000000, 0x02000000, MT_DEVICE }, /* Devs */ - { 0xf4000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */ - { 0xf6000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */ - { 0xf8000000, 0x4c000000, 0x00100000, MT_DEVICE }, /* USB host */ - { 0xfa000000, 0x50000000, 0x00100000, MT_DEVICE }, /* Camera */ - { 0xfe000000, 0x58000000, 0x00100000, MT_DEVICE }, /* IMem ctl */ - { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE } /* UNCACHED_PHYS_0 */ + { /* Devs */ + .virtual = 0xf2000000, + .pfn = __phys_to_pfn(0x40000000), + .length = 0x02000000, + .type = MT_DEVICE + }, { /* LCD */ + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(0x44000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* Mem Ctl */ + .virtual = 0xf6000000, + .pfn = __phys_to_pfn(0x48000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* USB host */ + .virtual = 0xf8000000, + .pfn = __phys_to_pfn(0x4c000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* Camera */ + .virtual = 0xfa000000, + .pfn = __phys_to_pfn(0x50000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* IMem ctl */ + .virtual = 0xfe000000, + .pfn = __phys_to_pfn(0x58000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* UNCACHED_PHYS_0 */ + .virtual = 0xff000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x00100000, + .type = MT_DEVICE + } }; void __init pxa_map_io(void) diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 386e107b53cc..01a83ab09ac3 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -152,16 +152,17 @@ static void __init idp_init_irq(void) } static struct map_desc idp_io_desc[] __initdata = { - /* virtual physical length type */ - - { IDP_COREVOLT_VIRT, - IDP_COREVOLT_PHYS, - IDP_COREVOLT_SIZE, - MT_DEVICE }, - { IDP_CPLD_VIRT, - IDP_CPLD_PHYS, - IDP_CPLD_SIZE, - MT_DEVICE } + { + .virtual = IDP_COREVOLT_VIRT, + .pfn = __phys_to_pfn(IDP_COREVOLT_PHYS), + .length = IDP_COREVOLT_SIZE, + .type = MT_DEVICE + }, { + .virtual = IDP_CPLD_VIRT, + .pfn = __phys_to_pfn(IDP_CPLD_PHYS), + .length = IDP_CPLD_SIZE, + .type = MT_DEVICE + } }; static void __init idp_map_io(void) diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 1f38033921e9..69abc7f61ed0 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -246,7 +246,12 @@ static void __init lubbock_init(void) } static struct map_desc lubbock_io_desc[] __initdata = { - { LUBBOCK_FPGA_VIRT, LUBBOCK_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */ + { /* CPLD */ + .virtual = LUBBOCK_FPGA_VIRT, + .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void __init lubbock_map_io(void) diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 85fdb5b1470a..8b4a21623fc0 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -317,7 +317,12 @@ static void __init mainstone_init(void) static struct map_desc mainstone_io_desc[] __initdata = { - { MST_FPGA_VIRT, MST_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */ + { /* CPLD */ + .virtual = MST_FPGA_VIRT, + .pfn = __phys_to_pfn(MST_FPGA_PHYS), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void __init mainstone_map_io(void) -- GitLab From f9258f226baf663099acb7972287ea0e26ce05a7 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:02 +0100 Subject: [PATCH 0483/1519] [ARM] 2989/1: Replace map_desc.physical with map_desc.pfn: RiscPC Patch from Deepak Saxena RiscPC map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-rpc/riscpc.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index e3587efec4bf..5c4ac1c008a6 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -61,9 +61,22 @@ static int __init parse_tag_acorn(const struct tag *tag) __tagtable(ATAG_ACORN, parse_tag_acorn); static struct map_desc rpc_io_desc[] __initdata = { - { SCREEN_BASE, SCREEN_START, 2*1048576, MT_DEVICE }, /* VRAM */ - { (u32)IO_BASE, IO_START, IO_SIZE , MT_DEVICE }, /* IO space */ - { EASI_BASE, EASI_START, EASI_SIZE, MT_DEVICE } /* EASI space */ + { /* VRAM */ + .virtual = SCREEN_BASE, + .pfn = __phys_to_pfn(SCREEN_START), + .length = 2*1048576, + .type = MT_DEVICE + }, { /* IO space */ + .virtual = (u32)IO_BASE, + .pfn = __phys_to_pfn(IO_START), + .length = IO_SIZE , + .type = MT_DEVICE + }, { /* EASI space */ + .virtual = EASI_BASE, + .pfn = __phys_to_pfn(EASI_START), + .length = EASI_SIZE, + .type = MT_DEVICE + } }; static void __init rpc_map_io(void) -- GitLab From 1cc977a76642b1eec2ab4ba80a6f0db9a63a091e Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:02 +0100 Subject: [PATCH 0484/1519] [ARM] 2990/1: Replace map_desc.physical with map_desc.pfn: S3C2410 Patch from Deepak Saxena S3C2410 map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-s3c2410/cpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h index 478c15c0e36a..9cbe5eef492b 100644 --- a/arch/arm/mach-s3c2410/cpu.h +++ b/arch/arm/mach-s3c2410/cpu.h @@ -21,7 +21,7 @@ /* todo - fix when rmk changes iodescs to use `void __iomem *` */ -#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, S3C2410_PA_##x, S3C24XX_SZ_##x, MT_DEVICE } +#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ #define MHZ (1000*1000) -- GitLab From cd5fc8bffd70b2d87953334b6195db4bc2125ff9 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:03 +0100 Subject: [PATCH 0485/1519] [ARM] 2991/1: Replace map_desc.physical with map_desc.pfn: Shark Patch from Deepak Saxena Shark map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-shark/core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index 946c0d11c73b..2d428b6dbb58 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -62,7 +62,12 @@ arch_initcall(shark_init); extern void shark_init_irq(void); static struct map_desc shark_io_desc[] __initdata = { - { IO_BASE , IO_START , IO_SIZE , MT_DEVICE } + { + .virtual = IO_BASE, + .pfn = __phys_to_pfn(IO_START), + .length = IO_SIZE, + .type = MT_DEVICE + } }; static void __init shark_map_io(void) -- GitLab From 92519d82828a93743adc31202927f411601c0d04 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:04 +0100 Subject: [PATCH 0486/1519] [ARM] 2992/1: Replace map_desc.physical with map_desc.pfn: SA1100 Patch from Deepak Saxena SA1100 map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-sa1100/assabet.c | 14 +++++++++++--- arch/arm/mach-sa1100/badge4.c | 20 ++++++++++++++++---- arch/arm/mach-sa1100/cerf.c | 8 ++++++-- arch/arm/mach-sa1100/collie.c | 14 +++++++++++--- arch/arm/mach-sa1100/generic.c | 26 +++++++++++++++++++++----- arch/arm/mach-sa1100/h3600.c | 20 ++++++++++++++++---- arch/arm/mach-sa1100/hackkit.c | 8 ++++++-- arch/arm/mach-sa1100/jornada720.c | 20 ++++++++++++++++---- arch/arm/mach-sa1100/lart.c | 14 +++++++++++--- arch/arm/mach-sa1100/neponset.c | 14 +++++++++++--- arch/arm/mach-sa1100/simpad.c | 16 +++++++++++----- 11 files changed, 136 insertions(+), 38 deletions(-) diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 24687f511bf5..75efb5da5b6d 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -388,9 +388,17 @@ static struct sa1100_port_fns assabet_port_fns __initdata = { }; static struct map_desc assabet_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf1000000, 0x12000000, 0x00100000, MT_DEVICE }, /* Board Control Register */ - { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE } /* MQ200 */ + { /* Board Control Register */ + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(0x12000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* MQ200 */ + .virtual = 0xf2800000, + .pfn = __phys_to_pfn(0x4b800000), + .length = 0x00800000, + .type = MT_DEVICE + } }; static void __init assabet_map_io(void) diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index b6169cb09196..c92cebff7f8e 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -254,10 +254,22 @@ EXPORT_SYMBOL(badge4_set_5V); static struct map_desc badge4_io_desc[] __initdata = { - /* virtual physical length type */ - {0xf1000000, 0x08000000, 0x00100000, MT_DEVICE },/* SRAM bank 1 */ - {0xf2000000, 0x10000000, 0x00100000, MT_DEVICE },/* SRAM bank 2 */ - {0xf4000000, 0x48000000, 0x00100000, MT_DEVICE } /* SA-1111 */ + { /* SRAM bank 1 */ + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* SRAM bank 2 */ + .virtual = 0xf2000000, + .pfn = __phys_to_pfn(0x10000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* SA-1111 */ + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(0x48000000), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 9484be7dc671..23cb74885275 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -100,8 +100,12 @@ static void __init cerf_init_irq(void) } static struct map_desc cerf_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf0000000, 0x08000000, 0x00100000, MT_DEVICE } /* Crystal Ethernet Chip */ + { /* Crystal Ethernet Chip */ + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void __init cerf_map_io(void) diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 6ecab7e2c238..7fd6e29c36b7 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -171,9 +171,17 @@ static void __init collie_init(void) } static struct map_desc collie_io_desc[] __initdata = { - /* virtual physical length type */ - {0xe8000000, 0x00000000, 0x02000000, MT_DEVICE}, /* 32M main flash (cs0) */ - {0xea000000, 0x08000000, 0x02000000, MT_DEVICE}, /* 32M boot flash (cs1) */ + { /* 32M main flash (cs0) */ + .virtual = 0xe8000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x02000000, + .type = MT_DEVICE + }, { /* 32M boot flash (cs1) */ + .virtual = 0xea000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x02000000, + .type = MT_DEVICE + } }; static void __init collie_map_io(void) diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 3f1e358455e5..93619497779c 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -369,11 +369,27 @@ EXPORT_SYMBOL(sa1100fb_lcd_power); */ static struct map_desc standard_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf8000000, 0x80000000, 0x00100000, MT_DEVICE }, /* PCM */ - { 0xfa000000, 0x90000000, 0x00100000, MT_DEVICE }, /* SCM */ - { 0xfc000000, 0xa0000000, 0x00100000, MT_DEVICE }, /* MER */ - { 0xfe000000, 0xb0000000, 0x00200000, MT_DEVICE } /* LCD + DMA */ + { /* PCM */ + .virtual = 0xf8000000, + .pfn = __phys_to_pfn(0x80000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* SCM */ + .virtual = 0xfa000000, + .pfn = __phys_to_pfn(0x90000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* MER */ + .virtual = 0xfc000000, + .pfn = __phys_to_pfn(0xa0000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* LCD + DMA */ + .virtual = 0xfe000000, + .pfn = __phys_to_pfn(0xb0000000), + .length = 0x00200000, + .type = MT_DEVICE + }, }; void __init sa1100_map_io(void) diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index e7aa2681ca64..e8352b7f74b0 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -223,10 +223,22 @@ static void h3xxx_lcd_power(int enable) } static struct map_desc h3600_io_desc[] __initdata = { - /* virtual physical length type */ - { H3600_BANK_2_VIRT, SA1100_CS2_PHYS, 0x02800000, MT_DEVICE }, /* static memory bank 2 CS#2 */ - { H3600_BANK_4_VIRT, SA1100_CS4_PHYS, 0x00800000, MT_DEVICE }, /* static memory bank 4 CS#4 */ - { H3600_EGPIO_VIRT, H3600_EGPIO_PHYS, 0x01000000, MT_DEVICE }, /* EGPIO 0 CS#5 */ + { /* static memory bank 2 CS#2 */ + .virtual = H3600_BANK_2_VIRT, + .pfn = __phys_to_pfn(SA1100_CS2_PHYS), + .length = 0x02800000, + .type = MT_DEVICE + }, { /* static memory bank 4 CS#4 */ + .virtual = H3600_BANK_4_VIRT, + .pfn = __phys_to_pfn(SA1100_CS4_PHYS), + .length = 0x00800000, + .type = MT_DEVICE + }, { /* EGPIO 0 CS#5 */ + .virtual = H3600_EGPIO_VIRT, + .pfn = __phys_to_pfn(H3600_EGPIO_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + } }; /* diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 502d65cfe654..c922e043c424 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -57,8 +57,12 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate) */ static struct map_desc hackkit_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xe8000000, 0x00000000, 0x01000000, MT_DEVICE } /* Flash bank 0 */ + { /* Flash bank 0 */ + .virtual = 0xe8000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x01000000, + .type = MT_DEVICE + }, }; static struct sa1100_port_fns hackkit_port_fns __initdata = { diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 2f497112c96a..9c363bfcf310 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -81,10 +81,22 @@ static int __init jornada720_init(void) arch_initcall(jornada720_init); static struct map_desc jornada720_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf0000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Epson registers */ - { 0xf1000000, 0x48200000, 0x00100000, MT_DEVICE }, /* Epson frame buffer */ - { 0xf4000000, 0x40000000, 0x00100000, MT_DEVICE } /* SA-1111 */ + { /* Epson registers */ + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0x48000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* Epson frame buffer */ + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(0x48200000), + .length = 0x00100000, + .type = MT_DEVICE + }, { /* SA-1111 */ + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(0x40000000), + .length = 0x00100000, + .type = MT_DEVICE + } }; static void __init jornada720_map_io(void) diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index ed6744d480af..8c9e3dd52942 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -31,9 +31,17 @@ static void __init lart_init(void) } static struct map_desc lart_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */ - { 0xec000000, 0x08000000, 0x00400000, MT_DEVICE } /* main flash, alternative location */ + { /* main flash memory */ + .virtual = 0xe8000000, + .pfn = __phys_to_pfn(0x00000000), + .length = 0x00400000, + .type = MT_DEVICE + }, { /* main flash, alternative location */ + .virtual = 0xec000000, + .pfn = __phys_to_pfn(0x08000000), + .length = 0x00400000, + .type = MT_DEVICE + } }; static void __init lart_map_io(void) diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index fc061641b7be..0c5eff3bdc09 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -331,9 +331,17 @@ static int __init neponset_init(void) subsys_initcall(neponset_init); static struct map_desc neponset_io_desc[] __initdata = { - /* virtual physical length type */ - { 0xf3000000, 0x10000000, SZ_1M, MT_DEVICE }, /* System Registers */ - { 0xf4000000, 0x40000000, SZ_1M, MT_DEVICE } /* SA-1111 */ + { /* System Registers */ + .virtual = 0xf3000000, + .pfn = __phys_to_pfn(0x10000000), + .length = SZ_1M, + .type = MT_DEVICE + }, { /* SA-1111 */ + .virtual = 0xf4000000, + .pfn = __phys_to_pfn(0x40000000), + .length = SZ_1M, + .type = MT_DEVICE + } }; void __init neponset_map_io(void) diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 07f6d5fd7bb0..cfb6658e5cdf 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -60,11 +60,17 @@ EXPORT_SYMBOL(set_cs3_bit); EXPORT_SYMBOL(clear_cs3_bit); static struct map_desc simpad_io_desc[] __initdata = { - /* virtual physical length type */ - /* MQ200 */ - { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE }, - /* Paules CS3, write only */ - { 0xf1000000, 0x18000000, 0x00100000, MT_DEVICE }, + { /* MQ200 */ + .virtual = 0xf2800000, + .pfn = __phys_to_pfn(0x4b800000), + .length = 0x00800000, + .type = MT_DEVICE + }, { /* Paules CS3, write only */ + .virtual = 0xf1000000, + .pfn = __phys_to_pfn(0x18000000), + .length = 0x00100000, + .type = MT_DEVICE + }, }; -- GitLab From f10083f5a6f4a2735cca3a8c762457272ea66bf0 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:05 +0100 Subject: [PATCH 0487/1519] [ARM] 2993/1: Replace map_desc.physical with map_desc.pfn: CLPS711x Patch from Deepak Saxena CLSP711x map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-clps711x/autcpu12.c | 12 ++++++++---- arch/arm/mach-clps711x/cdb89712.c | 7 ++++++- arch/arm/mach-clps711x/ceiva.c | 12 +++++++----- arch/arm/mach-clps711x/edb7211-mm.c | 30 ++++++++++++++++++++--------- arch/arm/mach-clps711x/mm.c | 8 +++++++- arch/arm/mach-clps711x/p720t.c | 14 ++++++++++++-- 6 files changed, 61 insertions(+), 22 deletions(-) diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index dc73feb1ffb0..43b9423d1440 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -46,10 +46,14 @@ */ static struct map_desc autcpu12_io_desc[] __initdata = { - /* virtual, physical, length, type */ - /* memory-mapped extra io and CS8900A Ethernet chip */ - /* ethernet chip */ - { AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, MT_DEVICE } + /* memory-mapped extra io and CS8900A Ethernet chip */ + /* ethernet chip */ + { + .virtual = AUTCPU12_VIRT_CS8900A, + .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A), + .length = SZ_1M, + .type = MT_DEVICE + } }; void __init autcpu12_map_io(void) diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index a46c82cd2711..cba7be5a06c3 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -39,7 +39,12 @@ * ethernet driver, perhaps. */ static struct map_desc cdb89712_io_desc[] __initdata = { - { ETHER_BASE, ETHER_START, ETHER_SIZE, MT_DEVICE } + { + .virtual = ETHER_BASE, + .pfn =__phys_to_pfn(ETHER_START), + .length = ETHER_SIZE, + .type = MT_DEVICE + } }; static void __init cdb89712_map_io(void) diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index 780d91805984..35d51a759b59 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -37,11 +37,13 @@ #include "common.h" static struct map_desc ceiva_io_desc[] __initdata = { - /* virtual, physical, length, type */ - - /* SED1355 controlled video RAM & registers */ - { CEIVA_VIRT_SED1355, CEIVA_PHYS_SED1355, SZ_2M, MT_DEVICE } - + /* SED1355 controlled video RAM & registers */ + { + .virtual = CEIVA_VIRT_SED1355, + .pfn = __phys_to_pfn(CEIVA_PHYS_SED1355), + .length = SZ_2M, + .type = MT_DEVICE + } }; diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c index 7fd7b01822d0..72f8bb05d55e 100644 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ b/arch/arm/mach-clps711x/edb7211-mm.c @@ -51,15 +51,27 @@ extern void clps711x_map_io(void); * happens). */ static struct map_desc edb7211_io_desc[] __initdata = { - /* virtual, physical, length, type */ - - /* memory-mapped extra keyboard row and CS8900A Ethernet chip */ - { EP7211_VIRT_EXTKBD, EP7211_PHYS_EXTKBD, SZ_1M, MT_DEVICE }, - { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, SZ_1M, MT_DEVICE }, - - /* flash banks */ - { EP7211_VIRT_FLASH1, EP7211_PHYS_FLASH1, SZ_8M, MT_DEVICE }, - { EP7211_VIRT_FLASH2, EP7211_PHYS_FLASH2, SZ_8M, MT_DEVICE } + { /* memory-mapped extra keyboard row */ + .virtual = EP7211_VIRT_EXTKBD, + .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), + .length = SZ_1M, + .type - MT_DEVICE + }, { /* and CS8900A Ethernet chip */ + .virtual = EP7211_VIRT_CS8900A, + .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), + .length = SZ_1M, + .type = MT_DEVICE + }, { /* flash banks */ + .virtual = EP7211_VIRT_FLASH1, + .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), + .length = SZ_8M, + .type = MT_DEVICE + }, { + .virtual = EP7211_VIRT_FLASH2, + .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), + .length = SZ_8M, + .type = MT_DEVICE + } }; void __init edb7211_map_io(void) diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c index 120b7cac84b5..a00f77ef8df8 100644 --- a/arch/arm/mach-clps711x/mm.c +++ b/arch/arm/mach-clps711x/mm.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -34,7 +35,12 @@ * This maps the generic CLPS711x registers */ static struct map_desc clps711x_io_desc[] __initdata = { - { CLPS7111_VIRT_BASE, CLPS7111_PHYS_BASE, 1048576, MT_DEVICE } + { + .virtual = CLPS7111_VIRT_BASE, + .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE), + .length = SZ_1M, + .type = MT_DEVICE + } }; void __init clps711x_map_io(void) diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 5bdb90edf992..a1acb945fb51 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -42,8 +43,17 @@ * We map both here. */ static struct map_desc p720t_io_desc[] __initdata = { - { SYSPLD_VIRT_BASE, SYSPLD_PHYS_BASE, 1048576, MT_DEVICE }, - { 0xfe400000, 0x10400000, 1048576, MT_DEVICE } + { + .virtual = SYSPLD_VIRT_BASE, + .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = 0xfe400000, + .pfn = __phys_to_pfn(0x10400000), + .length = SZ_1M, + .type = MT_DEVICE + } }; static void __init -- GitLab From d157e9ecec59383a676d676e2bb39367430396a2 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:05 +0100 Subject: [PATCH 0488/1519] [ARM] 2994/1: Replace map_desc.physical with map_desc.pfn: CLPS7500 Patch from Deepak Saxena CLSP7500 map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-clps7500/core.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index e216ab8b9e8f..0364ba4b539e 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -259,10 +259,27 @@ static void __init clps7500_init_irq(void) } static struct map_desc cl7500_io_desc[] __initdata = { - { IO_BASE, IO_START, IO_SIZE, MT_DEVICE }, /* IO space */ - { ISA_BASE, ISA_START, ISA_SIZE, MT_DEVICE }, /* ISA space */ - { FLASH_BASE, FLASH_START, FLASH_SIZE, MT_DEVICE }, /* Flash */ - { LED_BASE, LED_START, LED_SIZE, MT_DEVICE } /* LED */ + { /* IO space */ + .virtual = IO_BASE, + .pfn = __phys_to_pfn(IO_START), + .length = IO_SIZE, + .type = MT_DEVICE + }, { /* ISA space */ + .virtual = ISA_BASE, + .pfn = __phys_to_pfn(ISA_START), + .length = ISA_SIZE, + .type = MT_DEVICE + }, { /* Flash */ + .virtual = FLASH_BASE, + .pfn = __phys_to_pfn(FLASH_START), + .length = FLASH_SIZE, + .type = MT_DEVICE + }, { /* LED */ + .virtual = LED_BASE, + .pfn = __phys_to_pfn(LED_START), + .length = LED_SIZE, + .type = MT_DEVICE + } }; static void __init clps7500_map_io(void) -- GitLab From 1311521fb1b8ebbb0b470d028df13f2cbc643e51 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:06 +0100 Subject: [PATCH 0489/1519] [ARM] 2995/1: Replace map_desc.physical with map_desc.pfn: Versatile Patch from Deepak Saxena Versatile map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 83 ++++++++++++++++++++++++++++------ 1 file changed, 70 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index a30e0451df72..7e4bdd07f4af 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -186,25 +186,82 @@ void __init versatile_init_irq(void) } static struct map_desc versatile_io_desc[] __initdata = { - { IO_ADDRESS(VERSATILE_SYS_BASE), VERSATILE_SYS_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(VERSATILE_SIC_BASE), VERSATILE_SIC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(VERSATILE_VIC_BASE), VERSATILE_VIC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(VERSATILE_SCTL_BASE), VERSATILE_SCTL_BASE, SZ_4K * 9, MT_DEVICE }, + { + .virtual = IO_ADDRESS(VERSATILE_SYS_BASE), + .pfn = __phys_to_pfn(VERSATILE_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(VERSATILE_SIC_BASE), + .pfn = __phys_to_pfn(VERSATILE_SIC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(VERSATILE_VIC_BASE), + .pfn = __phys_to_pfn(VERSATILE_VIC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE), + .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE), + .length = SZ_4K * 9, + .type = MT_DEVICE + }, #ifdef CONFIG_MACH_VERSATILE_AB - { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(VERSATILE_IB2_BASE), VERSATILE_IB2_BASE, SZ_64M, MT_DEVICE }, + { + .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE), + .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(VERSATILE_IB2_BASE), + .pfn = __phys_to_pfn(VERSATILE_IB2_BASE), + .length = SZ_64M, + .type = MT_DEVICE + }, #endif #ifdef CONFIG_DEBUG_LL - { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE }, + { + .virtual = IO_ADDRESS(VERSATILE_UART0_BASE), + .pfn = __phys_to_pfn(VERSATILE_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, #endif #ifdef CONFIG_PCI - { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE }, - { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE }, - { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE }, + { + .virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE), + .pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = VERSATILE_PCI_VIRT_BASE, + .pfn = __phys_to_pfn(VERSATILE_PCI_BASE), + .length = VERSATILE_PCI_BASE_SIZE, + .type = MT_DEVICE + }, { + .virtual = VERSATILE_PCI_CFG_VIRT_BASE, + .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), + .length = VERSATILE_PCI_CFG_BASE_SIZE, + .type = MT_DEVICE + }, #if 0 - { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE }, - { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE }, - { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE }, + { + .virtual = VERSATILE_PCI_VIRT_MEM_BASE0, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VERSATILE_PCI_VIRT_MEM_BASE1, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VERSATILE_PCI_VIRT_MEM_BASE2, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2), + .length = SZ_16M, + .type = MT_DEVICE + }, #endif #endif }; -- GitLab From 7a557e246f5c24f4c7218f41f8caf03c492f40f9 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:07 +0100 Subject: [PATCH 0490/1519] [ARM] 2996/1: Replace map_desc.physical with map_desc.pfn: EPXA10DB Patch from Deepak Saxena EPXA10DB mapd_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-epxa10db/mm.c | 37 +++++++++++++++++++++++++++++++------ 1 file changed, 31 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c index 2aa57fa46da3..e8832d0910ee 100644 --- a/arch/arm/mach-epxa10db/mm.c +++ b/arch/arm/mach-epxa10db/mm.c @@ -31,12 +31,37 @@ /* Page table mapping for I/O region */ static struct map_desc epxa10db_io_desc[] __initdata = { - { IO_ADDRESS(EXC_REGISTERS_BASE), EXC_REGISTERS_BASE, SZ_16K, MT_DEVICE }, - { IO_ADDRESS(EXC_PLD_BLOCK0_BASE), EXC_PLD_BLOCK0_BASE, SZ_16K, MT_DEVICE }, - { IO_ADDRESS(EXC_PLD_BLOCK1_BASE), EXC_PLD_BLOCK1_BASE, SZ_16K, MT_DEVICE }, - { IO_ADDRESS(EXC_PLD_BLOCK2_BASE), EXC_PLD_BLOCK2_BASE, SZ_16K, MT_DEVICE }, - { IO_ADDRESS(EXC_PLD_BLOCK3_BASE), EXC_PLD_BLOCK3_BASE, SZ_16K, MT_DEVICE }, - { FLASH_VADDR(EXC_EBI_BLOCK0_BASE), EXC_EBI_BLOCK0_BASE, SZ_16M, MT_DEVICE } + { + .virtual = IO_ADDRESS(EXC_REGISTERS_BASE), + .pfn = __phys_to_pfn(EXC_REGISTERS_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE), + .pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE), + .pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE), + .physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE), + .pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, { + .virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE), + .pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE), + .length = SZ_16M, + .type = MT_DEVICE + } }; void __init epxa10db_map_io(void) -- GitLab From 6cb1907c1a88563c84123c923b46424ea68b53eb Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:08 +0100 Subject: [PATCH 0491/1519] [ARM] 2997/1: Replace map_desc.physical with map_desc.pfn: EBSA110 Patch from Deepak Saxena EBSA110 map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ebsa110/core.c | 38 ++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 5aeadfd72143..15261646dcdd 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -76,16 +76,42 @@ static struct map_desc ebsa110_io_desc[] __initdata = { /* * sparse external-decode ISAIO space */ - { IRQ_STAT, TRICK4_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_STAT/IRQ_MCLR */ - { IRQ_MASK, TRICK3_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_MASK/IRQ_MSET */ - { SOFT_BASE, TRICK1_PHYS, PGDIR_SIZE, MT_DEVICE }, /* SOFT_BASE */ - { PIT_BASE, TRICK0_PHYS, PGDIR_SIZE, MT_DEVICE }, /* PIT_BASE */ + { /* IRQ_STAT/IRQ_MCLR */ + .virtual = IRQ_STAT, + .pfn = __phys_to_pfn(TRICK4_PHYS), + .length = PGDIR_SIZE, + .type = MT_DEVICE + }, { /* IRQ_MASK/IRQ_MSET */ + .virtual = IRQ_MASK, + .pfn = __phys_to_pfn(TRICK3_PHYS), + .length = PGDIR_SIZE, + .type = MT_DEVICE + }, { /* SOFT_BASE */ + .virtual = SOFT_BASE, + .pfn = __phys_to_pfn(TRICK1_PHYS), + .length = PGDIR_SIZE, + .type = MT_DEVICE + }, { /* PIT_BASE */ + .virtual = PIT_BASE, + .pfn = __phys_to_pfn(TRICK0_PHYS), + .length = PGDIR_SIZE, + .type = MT_DEVICE + }, /* * self-decode ISAIO space */ - { ISAIO_BASE, ISAIO_PHYS, ISAIO_SIZE, MT_DEVICE }, - { ISAMEM_BASE, ISAMEM_PHYS, ISAMEM_SIZE, MT_DEVICE } + { + .virtual = ISAIO_BASE, + .pfn = __phys_to_pfn(ISAIO_PHYS), + .length = ISAIO_SIZE, + .type = MT_DEVICE + }, { + .virtual = ISAMEM_BASE, + .pfn = __phys_to_pfn(ISAMEM_PHYS), + .length = ISAMEM_SIZE, + .type = MT_DEVICE + } }; static void __init ebsa110_map_io(void) -- GitLab From a427ceef934d8162c8c61d152e969bc3ec21a4e5 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:08 +0100 Subject: [PATCH 0492/1519] [ARM] 2998/1: Replace map_desc.physical with map_desc.pfn: Footbridge Patch from Deepak Saxena Footbridge map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-footbridge/common.c | 57 ++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index eb8238c1ef06..dc09fd200c16 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -130,8 +130,17 @@ void __init footbridge_init_irq(void) * it means that we have extra bullet protection on our feet. */ static struct map_desc fb_common_io_desc[] __initdata = { - { ARMCSR_BASE, DC21285_ARMCSR_BASE, ARMCSR_SIZE, MT_DEVICE }, - { XBUS_BASE, 0x40000000, XBUS_SIZE, MT_DEVICE } + { + .virtual = ARMCSR_BASE, + .pfn = DC21285_ARMCSR_BASE, + .length = ARMCSR_SIZE, + .type = MT_DEVICE + }, { + .virtual = XBUS_BASE, + .pfn = __phys_to_pfn(0x40000000), + .length = XBUS_SIZE, + .type = MT_DEVICE + } }; /* @@ -140,11 +149,32 @@ static struct map_desc fb_common_io_desc[] __initdata = { */ static struct map_desc ebsa285_host_io_desc[] __initdata = { #if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST) - { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE }, - { PCICFG0_BASE, DC21285_PCI_TYPE_0_CONFIG, PCICFG0_SIZE, MT_DEVICE }, - { PCICFG1_BASE, DC21285_PCI_TYPE_1_CONFIG, PCICFG1_SIZE, MT_DEVICE }, - { PCIIACK_BASE, DC21285_PCI_IACK, PCIIACK_SIZE, MT_DEVICE }, - { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE } + { + .virtual = PCIMEM_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_MEM), + .length = PCIMEM_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCICFG0_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG), + .length = PCICFG0_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCICFG1_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG), + .length = PCICFG1_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCIIACK_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_IACK), + .length = PCIIACK_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCIO_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_IO), + .length = PCIO_SIZE, + .type = MT_DEVICE + } #endif }; @@ -153,8 +183,17 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { */ static struct map_desc co285_io_desc[] __initdata = { #ifdef CONFIG_ARCH_CO285 - { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE }, - { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE } + { + .virtual = PCIO_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_IO), + .length = PCIO_SIZE, + .type = MT_DEVICE + }, { + .virtual = PCIMEM_BASE, + .pfn = __phys_to_pfn(DC21285_PCI_MEM), + .length = PCIMEM_SIZE, + .type = MT_DEVICE + } #endif }; -- GitLab From 3e9635e4060238549ffac239de34f6122b053653 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:09 +0100 Subject: [PATCH 0493/1519] [ARM] 2999/1: Replace map_desc.physical with map_desc.pfn: H720x Patch from Deepak Saxena H720x map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-h720x/common.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 5110e2e65ddd..c096b4569308 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -237,7 +237,12 @@ void __init h720x_init_irq (void) } static struct map_desc h720x_io_desc[] __initdata = { - { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE }, + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, }; /* Initialize io tables */ -- GitLab From adecef744fc5b4e9316c851feec2a4d2640dd7ae Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:10 +0100 Subject: [PATCH 0494/1519] [ARM] 3000/1: Replace map_desc.physical with map_desc.pfn: iMX Patch from Deepak Saxena iMX map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-imx/generic.c | 8 ++++++-- arch/arm/mach-imx/mx1ads.c | 38 ++++++++++++++++++++++++++++++------- 2 files changed, 37 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index f8a742bb2d5b..cb14b0682cef 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -273,8 +273,12 @@ static struct platform_device *devices[] __initdata = { }; static struct map_desc imx_io_desc[] __initdata = { - /* virtual physical length type */ - {IMX_IO_BASE, IMX_IO_PHYS, IMX_IO_SIZE, MT_DEVICE}, + { + .virtual = IMX_IO_BASE, + .pfn = __phys_to_pfn(IMX_IO_PHYS), + .length = IMX_IO_SIZE, + .type = MT_DEVICE + } }; void __init diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index a7511ddfe364..4cbdc1fe04b1 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -61,13 +61,37 @@ mx1ads_init(void) } static struct map_desc mx1ads_io_desc[] __initdata = { - /* virtual physical length type */ - {IMX_CS0_VIRT, IMX_CS0_PHYS, IMX_CS0_SIZE, MT_DEVICE}, - {IMX_CS1_VIRT, IMX_CS1_PHYS, IMX_CS1_SIZE, MT_DEVICE}, - {IMX_CS2_VIRT, IMX_CS2_PHYS, IMX_CS2_SIZE, MT_DEVICE}, - {IMX_CS3_VIRT, IMX_CS3_PHYS, IMX_CS3_SIZE, MT_DEVICE}, - {IMX_CS4_VIRT, IMX_CS4_PHYS, IMX_CS4_SIZE, MT_DEVICE}, - {IMX_CS5_VIRT, IMX_CS5_PHYS, IMX_CS5_SIZE, MT_DEVICE}, + { + .virtual = IMX_CS0_VIRT, + .pfn = __phys_to_pfn(IMX_CS0_PHYS), + .length = IMX_CS0_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS1_VIRT, + .pfn = __phys_to_pfn(IMX_CS1_PHYS), + .length = IMX_CS1_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS2_VIRT, + .pfn = __phys_to_pfn(IMX_CS2_PHYS), + .length = IMX_CS2_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS3_VIRT, + .pfn = __phys_to_pfn(IMX_CS3_PHYS), + .length = IMX_CS3_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS4_VIRT, + .pfn = __phys_to_pfn(IMX_CS4_PHYS), + .length = IMX_CS4_SIZE, + .type = MT_DEVICE + }, { + .virtual = IMX_CS5_VIRT, + .pfn = __phys_to_pfn(IMX_CS5_PHYS), + .length = IMX_CS5_SIZE, + .type = MT_DEVICE + } }; static void __init -- GitLab From c8d2729858d76de4ef7522c8171004fc1959cc44 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:10 +0100 Subject: [PATCH 0495/1519] [ARM] 3001/1: Replace map_desc.physical with map_desc.pfn: Integrator Patch from Deepak Saxena Integrator map_desc.pfn conversion Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-integrator/integrator_ap.c | 79 ++++++++++++++++++++---- arch/arm/mach-integrator/integrator_cp.c | 67 ++++++++++++++++---- 2 files changed, 122 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 36e2b6eb67b7..f368b85f0447 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -75,19 +75,72 @@ */ static struct map_desc ap_io_desc[] __initdata = { - { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE }, - { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE }, - { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_64K, MT_DEVICE }, - { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE } + { + .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = PCI_MEMORY_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = PCI_CONFIG_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = PCI_V3_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE), + .length = SZ_64K, + .type = MT_DEVICE + }, { + .virtual = PCI_IO_VADDR, + .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE), + .length = SZ_64K, + .type = MT_DEVICE + } }; static void __init ap_map_io(void) diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 2be5c03ab87f..aa34c58b96c4 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -74,17 +74,62 @@ */ static struct map_desc intcp_io_desc[] __initdata = { - { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE }, - { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE }, - { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE }, - { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE }, + { + .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = 0xfca00000, + .pfn = __phys_to_pfn(0xca000000), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = 0xfcb00000, + .pfn = __phys_to_pfn(0xcb000000), + .length = SZ_4K, + .type = MT_DEVICE + } }; static void __init intcp_map_io(void) -- GitLab From 9769c2468d423a1562dd59a5db250bd0a5533ec9 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:11 +0100 Subject: [PATCH 0496/1519] [ARM] 3016/1: Replace map_desc.physical with map_desc.pfn Patch from Deepak Saxena Convert map_desc.physical to map_desc.pfn. This allows us to add support for 36-bit addressed physical devices in the static maps without having to resort to u64 variables. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mm/init.c | 12 ++++++------ arch/arm/mm/mm-armv.c | 8 ++++---- include/asm-arm/mach/map.h | 5 ++++- 3 files changed, 14 insertions(+), 11 deletions(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index d1f1ec73500f..f4496813615a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -262,8 +262,8 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) if (end_pfn < end) end_pfn = end; - map.physical = mi->bank[i].start; - map.virtual = __phys_to_virt(map.physical); + map.pfn = __phys_to_pfn(mi->bank[i].start); + map.virtual = __phys_to_virt(mi->bank[i].start); map.length = mi->bank[i].size; map.type = MT_MEMORY; @@ -365,7 +365,7 @@ static void __init bootmem_init(struct meminfo *mi) #ifdef CONFIG_XIP_KERNEL #error needs fixing - p->physical = CONFIG_XIP_PHYS_ADDR & PMD_MASK; + p->pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PMD_MASK); p->virtual = (unsigned long)&_stext & PMD_MASK; p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK; p->type = MT_ROM; @@ -439,14 +439,14 @@ static void __init devicemaps_init(struct machine_desc *mdesc) * Map the cache flushing regions. */ #ifdef FLUSH_BASE - map.physical = FLUSH_BASE_PHYS; + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS); map.virtual = FLUSH_BASE; map.length = PGDIR_SIZE; map.type = MT_CACHECLEAN; create_mapping(&map); #endif #ifdef FLUSH_BASE_MINICACHE - map.physical = FLUSH_BASE_PHYS + PGDIR_SIZE; + map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE); map.virtual = FLUSH_BASE_MINICACHE; map.length = PGDIR_SIZE; map.type = MT_MINICLEAN; @@ -464,7 +464,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) * location (0xffff0000). If we aren't using high-vectors, also * create a mapping at the low-vectors virtual address. */ - map.physical = virt_to_phys(vectors); + map.pfn = __phys_to_pfn(virt_to_phys(vectors)); map.virtual = 0xffff0000; map.length = PAGE_SIZE; map.type = MT_HIGH_VECTORS; diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index c626361c0f5e..64db10e806b3 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -483,7 +483,7 @@ void __init create_mapping(struct map_desc *md) if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { printk(KERN_WARNING "BUG: not creating mapping for " "0x%08lx at 0x%08lx in user region\n", - md->physical, md->virtual); + __pfn_to_phys(md->pfn), md->virtual); return; } @@ -491,7 +491,7 @@ void __init create_mapping(struct map_desc *md) md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx " "overlaps vmalloc space\n", - md->physical, md->virtual); + __pfn_to_phys(md->pfn), md->virtual); } domain = mem_types[md->type].domain; @@ -500,14 +500,14 @@ void __init create_mapping(struct map_desc *md) prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain); virt = md->virtual; - off = md->physical - virt; + off = __pfn_to_phys(md->pfn) - virt; length = md->length; if (mem_types[md->type].prot_l1 == 0 && (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) { printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not " "be mapped using pages, ignoring.\n", - md->physical, md->virtual); + __pfn_to_phys(md->pfn), md->virtual); return; } diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h index 9ac47cf8d2e4..0619522bd926 100644 --- a/include/asm-arm/mach/map.h +++ b/include/asm-arm/mach/map.h @@ -11,7 +11,7 @@ */ struct map_desc { unsigned long virtual; - unsigned long physical; + unsigned long pfn; unsigned long length; unsigned int type; }; @@ -27,6 +27,9 @@ struct meminfo; #define MT_ROM 6 #define MT_IXP2000_DEVICE 7 +#define __phys_to_pfn(paddr) (paddr >> PAGE_SHIFT) +#define __pfn_to_phys(pfn) (pfn << PAGE_SHIFT) + extern void create_memmap_holes(struct meminfo *); extern void memtable_init(struct meminfo *); extern void iotable_init(struct map_desc *, int); -- GitLab From 0b7cd62ecdc1f09b7df4608a3fee644b1c27985b Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Fri, 28 Oct 2005 15:19:12 +0100 Subject: [PATCH 0497/1519] [ARM] 3017/1: Add support for 36-bit addresses to create_mapping() Patch from Deepak Saxena This patch adds support for 36-bit static mapped I/O. While there are no platforms in the tree ATM that use it, it has been tested tested on the IXP2350 NPU and I would like to get the support for that chipset upstream one piece at a time. There are also other Intel chipset ports in development that are waiting on this to go upstream. The patch replaces the print formats for physical addresses with %016llx which will create a bit extraneous output on 32-bit systems, but I think that is cleaner than having #ifdefs, specially since users will only see the output in error cases. Depends on 3016/1. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mm/mm-armv.c | 60 +++++++++++++++++++++++++++++++++---------- 1 file changed, 47 insertions(+), 13 deletions(-) diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 64db10e806b3..61bc2fa0511e 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -478,20 +478,20 @@ void __init create_mapping(struct map_desc *md) unsigned long virt, length; int prot_sect, prot_l1, domain; pgprot_t prot_pte; - long off; + unsigned long off = (u32)__pfn_to_phys(md->pfn); if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { printk(KERN_WARNING "BUG: not creating mapping for " - "0x%08lx at 0x%08lx in user region\n", - __pfn_to_phys(md->pfn), md->virtual); + "0x%016llx at 0x%08lx in user region\n", + __pfn_to_phys((u64)md->pfn), md->virtual); return; } if ((md->type == MT_DEVICE || md->type == MT_ROM) && md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx " + printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx " "overlaps vmalloc space\n", - __pfn_to_phys(md->pfn), md->virtual); + __pfn_to_phys((u64)md->pfn), md->virtual); } domain = mem_types[md->type].domain; @@ -499,8 +499,33 @@ void __init create_mapping(struct map_desc *md) prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain); prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain); + /* + * Catch 36-bit addresses + */ + if(md->pfn >= 0x100000) { + if(domain) { + printk(KERN_ERR "MM: invalid domain in supersection " + "mapping for 0x%016llx at 0x%08lx\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + if((md->virtual | md->length | __pfn_to_phys(md->pfn)) + & ~SUPERSECTION_MASK) { + printk(KERN_ERR "MM: cannot create mapping for " + "0x%016llx at 0x%08lx invalid alignment\n", + __pfn_to_phys((u64)md->pfn), md->virtual); + return; + } + + /* + * Shift bits [35:32] of address into bits [23:20] of PMD + * (See ARMv6 spec). + */ + off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20); + } + virt = md->virtual; - off = __pfn_to_phys(md->pfn) - virt; + off -= virt; length = md->length; if (mem_types[md->type].prot_l1 == 0 && @@ -525,13 +550,22 @@ void __init create_mapping(struct map_desc *md) * of the actual domain assignments in use. */ if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) { - /* Align to supersection boundary */ - while ((virt & ~SUPERSECTION_MASK || (virt + off) & - ~SUPERSECTION_MASK) && length >= (PGDIR_SIZE / 2)) { - alloc_init_section(virt, virt + off, prot_sect); - - virt += (PGDIR_SIZE / 2); - length -= (PGDIR_SIZE / 2); + /* + * Align to supersection boundary if !high pages. + * High pages have already been checked for proper + * alignment above and they will fail the SUPSERSECTION_MASK + * check because of the way the address is encoded into + * offset. + */ + if (md->pfn <= 0x100000) { + while ((virt & ~SUPERSECTION_MASK || + (virt + off) & ~SUPERSECTION_MASK) && + length >= (PGDIR_SIZE / 2)) { + alloc_init_section(virt, virt + off, prot_sect); + + virt += (PGDIR_SIZE / 2); + length -= (PGDIR_SIZE / 2); + } } while (length >= SUPERSECTION_SIZE) { -- GitLab From c09f98271f685af349d3f0199360f1c0e85550e0 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 28 Oct 2005 15:26:40 +0100 Subject: [PATCH 0498/1519] [ARM] 2930/1: optimized sha1 implementation for ARM Patch from Nicolas Pitre Here's an ARM assembly SHA1 implementation to replace the default C version. It is approximately 50% faster than the generic C version. On an XScale processor running at 400MHz: generic C version: 9.8 MB/s my version: 14.5 MB/s This code is useful to quite a few callers in the tree: crypto/sha1.c: sha_transform(sctx->state, sctx->buffer, temp); crypto/sha1.c: sha_transform(sctx->state, &data[i], temp); drivers/char/random.c: sha_transform(buf, (__u8 *)r->pool+i, buf + 5); drivers/char/random.c: sha_transform(buf, (__u8 *)data, buf + 5); net/ipv4/syncookies.c: sha_transform(tmp + 16, (__u8 *)tmp, tmp + 16 + 5); Signed-off-by: Nicolas Pitre Seems to work fine on big-endian as well. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/lib/Makefile | 2 +- arch/arm/lib/sha1.S | 206 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 207 insertions(+), 1 deletion(-) create mode 100644 arch/arm/lib/sha1.S diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 8725d63e4219..71e5b99e519e 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -11,7 +11,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ strnlen_user.o strchr.o strrchr.o testchangebit.o \ testclearbit.o testsetbit.o uaccess.o getuser.o \ putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o lib1funcs.o div64.o \ + ucmpdi2.o lib1funcs.o div64.o sha1.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o ifeq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S new file mode 100644 index 000000000000..ff6ece487ffc --- /dev/null +++ b/arch/arm/lib/sha1.S @@ -0,0 +1,206 @@ +/* + * linux/arch/arm/lib/sha1.S + * + * SHA transform optimized for ARM + * + * Copyright: (C) 2005 by Nicolas Pitre + * Created: September 17, 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The reference implementation for this code is linux/lib/sha1.c + */ + +#include + + .text + + +/* + * void sha_transform(__u32 *digest, const char *in, __u32 *W) + * + * Note: the "in" ptr may be unaligned. + */ + +ENTRY(sha_transform) + + stmfd sp!, {r4 - r8, lr} + + @ for (i = 0; i < 16; i++) + @ W[i] = be32_to_cpu(in[i]); */ + +#ifdef __ARMEB__ + mov r4, r0 + mov r0, r2 + mov r2, #64 + bl memcpy + mov r2, r0 + mov r0, r4 +#else + mov r3, r2 + mov lr, #16 +1: ldrb r4, [r1], #1 + ldrb r5, [r1], #1 + ldrb r6, [r1], #1 + ldrb r7, [r1], #1 + subs lr, lr, #1 + orr r5, r5, r4, lsl #8 + orr r6, r6, r5, lsl #8 + orr r7, r7, r6, lsl #8 + str r7, [r3], #4 + bne 1b +#endif + + @ for (i = 0; i < 64; i++) + @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31); + + sub r3, r2, #4 + mov lr, #64 +2: ldr r4, [r3, #4]! + subs lr, lr, #1 + ldr r5, [r3, #8] + ldr r6, [r3, #32] + ldr r7, [r3, #52] + eor r4, r4, r5 + eor r4, r4, r6 + eor r4, r4, r7 + mov r4, r4, ror #31 + str r4, [r3, #64] + bne 2b + + /* + * The SHA functions are: + * + * f1(B,C,D) = (D ^ (B & (C ^ D))) + * f2(B,C,D) = (B ^ C ^ D) + * f3(B,C,D) = ((B & C) | (D & (B | C))) + * + * Then the sub-blocks are processed as follows: + * + * A' = ror(A, 27) + f(B,C,D) + E + K + *W++ + * B' = A + * C' = ror(B, 2) + * D' = C + * E' = D + * + * We therefore unroll each loop 5 times to avoid register shuffling. + * Also the ror for C (and also D and E which are successivelyderived + * from it) is applied in place to cut on an additional mov insn for + * each round. + */ + + .macro sha_f1, A, B, C, D, E + ldr r3, [r2], #4 + eor ip, \C, \D + add \E, r1, \E, ror #2 + and ip, \B, ip, ror #2 + add \E, \E, \A, ror #27 + eor ip, ip, \D, ror #2 + add \E, \E, r3 + add \E, \E, ip + .endm + + .macro sha_f2, A, B, C, D, E + ldr r3, [r2], #4 + add \E, r1, \E, ror #2 + eor ip, \B, \C, ror #2 + add \E, \E, \A, ror #27 + eor ip, ip, \D, ror #2 + add \E, \E, r3 + add \E, \E, ip + .endm + + .macro sha_f3, A, B, C, D, E + ldr r3, [r2], #4 + add \E, r1, \E, ror #2 + orr ip, \B, \C, ror #2 + add \E, \E, \A, ror #27 + and ip, ip, \D, ror #2 + add \E, \E, r3 + and r3, \B, \C, ror #2 + orr ip, ip, r3 + add \E, \E, ip + .endm + + ldmia r0, {r4 - r8} + + mov lr, #4 + ldr r1, .L_sha_K + 0 + + /* adjust initial values */ + mov r6, r6, ror #30 + mov r7, r7, ror #30 + mov r8, r8, ror #30 + +3: subs lr, lr, #1 + sha_f1 r4, r5, r6, r7, r8 + sha_f1 r8, r4, r5, r6, r7 + sha_f1 r7, r8, r4, r5, r6 + sha_f1 r6, r7, r8, r4, r5 + sha_f1 r5, r6, r7, r8, r4 + bne 3b + + ldr r1, .L_sha_K + 4 + mov lr, #4 + +4: subs lr, lr, #1 + sha_f2 r4, r5, r6, r7, r8 + sha_f2 r8, r4, r5, r6, r7 + sha_f2 r7, r8, r4, r5, r6 + sha_f2 r6, r7, r8, r4, r5 + sha_f2 r5, r6, r7, r8, r4 + bne 4b + + ldr r1, .L_sha_K + 8 + mov lr, #4 + +5: subs lr, lr, #1 + sha_f3 r4, r5, r6, r7, r8 + sha_f3 r8, r4, r5, r6, r7 + sha_f3 r7, r8, r4, r5, r6 + sha_f3 r6, r7, r8, r4, r5 + sha_f3 r5, r6, r7, r8, r4 + bne 5b + + ldr r1, .L_sha_K + 12 + mov lr, #4 + +6: subs lr, lr, #1 + sha_f2 r4, r5, r6, r7, r8 + sha_f2 r8, r4, r5, r6, r7 + sha_f2 r7, r8, r4, r5, r6 + sha_f2 r6, r7, r8, r4, r5 + sha_f2 r5, r6, r7, r8, r4 + bne 6b + + ldmia r0, {r1, r2, r3, ip, lr} + add r4, r1, r4 + add r5, r2, r5 + add r6, r3, r6, ror #2 + add r7, ip, r7, ror #2 + add r8, lr, r8, ror #2 + stmia r0, {r4 - r8} + + ldmfd sp!, {r4 - r8, pc} + +.L_sha_K: + .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 + + +/* + * void sha_init(__u32 *buf) + */ + +.L_sha_initial_digest: + .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0 + +ENTRY(sha_init) + + str lr, [sp, #-4]! + adr r1, .L_sha_initial_digest + ldmia r1, {r1, r2, r3, ip, lr} + stmia r0, {r1, r2, r3, ip, lr} + ldr pc, [sp], #4 + -- GitLab From 42d3a120fe9a1831b88e7037ce0b048d82433b09 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 28 Oct 2005 15:26:41 +0100 Subject: [PATCH 0499/1519] [ARM] 3033/1: S3C2410 - add generic gpio_cfgpin options Patch from Ben Dooks Add generic values for the parameters to the s3c2410_gpio_cfgpin() function, so that a caller does not need to know the exact constant for the specified pin. This is very useful for the case where a driver is passed a gpio pin number and needs to reconfigure the pin's function. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/gpio.c | 22 ++++++++++++++++++++++ include/asm-arm/arch-s3c2410/regs-gpio.h | 6 ++++++ 2 files changed, 28 insertions(+) diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index 94f1776cf312..23ea3d5fa09c 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -30,6 +30,7 @@ * 04-Oct-2004 BJD Added irq filter controls for GPIO * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code * 13-Mar-2005 BJD Updates for __iomem + * 26-Oct-2005 BJD Added generic configuration types */ @@ -58,6 +59,27 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; } + switch (function) { + case S3C2410_GPIO_LEAVE: + mask = 0; + function = 0; + break; + + case S3C2410_GPIO_INPUT: + case S3C2410_GPIO_OUTPUT: + case S3C2410_GPIO_SFN2: + case S3C2410_GPIO_SFN3: + if (pin < S3C2410_GPIO_BANKB) { + function &= 1; + function <<= S3C2410_GPIO_OFFSET(pin); + } else { + function &= 3; + function <<= S3C2410_GPIO_OFFSET(pin)*2; + } + } + + /* modify the specified register wwith IRQs off */ + local_irq_save(flags); con = __raw_readl(base + 0x00); diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index 2053cbacffc3..cb33d57c146c 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -20,6 +20,7 @@ * 18-11-2004 BJD Added S3C2440 AC97 controls * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 28-Mar-2005 LCVR Fixed definition of GPB10 + * 26-Oct-2005 BJD Added generic configuration types */ @@ -43,6 +44,11 @@ /* general configuration options */ #define S3C2410_GPIO_LEAVE (0xFFFFFFFF) +#define S3C2410_GPIO_INPUT (0xFFFFFFF0) +#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) +#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ +#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */ +#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ /* configure GPIO ports A..G */ -- GitLab From a0e0adb96ebe6bf0b8b3fe4cd6c214b1e8964609 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 28 Oct 2005 15:26:42 +0100 Subject: [PATCH 0500/1519] [ARM] 3034/1: S3C2410 - fix size of devices in devs.c Patch from Ben Dooks From: Guillaume GOURAT A number of devices have an extra byte on the end of their areas due to mis-calculating the .end field of their resources Signed-off-by: Guillaume GOURAT Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/devs.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 0077937a7ab8..8a37236b04ab 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -47,7 +47,7 @@ struct platform_device *s3c24xx_uart_devs[3]; static struct resource s3c_usb_resource[] = { [0] = { .start = S3C2410_PA_USBHOST, - .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST, + .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -77,7 +77,7 @@ EXPORT_SYMBOL(s3c_device_usb); static struct resource s3c_lcd_resource[] = { [0] = { .start = S3C2410_PA_LCD, - .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD, + .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -117,7 +117,7 @@ EXPORT_SYMBOL(set_s3c2410fb_info); static struct resource s3c_nand_resource[] = { [0] = { .start = S3C2410_PA_NAND, - .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND, + .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1, .flags = IORESOURCE_MEM, } }; @@ -136,7 +136,7 @@ EXPORT_SYMBOL(s3c_device_nand); static struct resource s3c_usbgadget_resource[] = { [0] = { .start = S3C2410_PA_USBDEV, - .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV, + .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -161,7 +161,7 @@ EXPORT_SYMBOL(s3c_device_usbgadget); static struct resource s3c_wdt_resource[] = { [0] = { .start = S3C2410_PA_WATCHDOG, - .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG, + .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -186,7 +186,7 @@ EXPORT_SYMBOL(s3c_device_wdt); static struct resource s3c_i2c_resource[] = { [0] = { .start = S3C2410_PA_IIC, - .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC, + .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -211,7 +211,7 @@ EXPORT_SYMBOL(s3c_device_i2c); static struct resource s3c_iis_resource[] = { [0] = { .start = S3C2410_PA_IIS, - .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS, + .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1, .flags = IORESOURCE_MEM, } }; @@ -265,7 +265,7 @@ EXPORT_SYMBOL(s3c_device_rtc); static struct resource s3c_adc_resource[] = { [0] = { .start = S3C2410_PA_ADC, - .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC, + .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -288,7 +288,7 @@ struct platform_device s3c_device_adc = { static struct resource s3c_sdi_resource[] = { [0] = { .start = S3C2410_PA_SDI, - .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI, + .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -465,7 +465,7 @@ EXPORT_SYMBOL(s3c_device_timer3); static struct resource s3c_camif_resource[] = { [0] = { .start = S3C2440_PA_CAMIF, - .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF, + .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1, .flags = IORESOURCE_MEM, }, [1] = { -- GitLab From 63a4b52c9ddca944afc1b78aacbf641c650780d7 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 28 Oct 2005 15:26:42 +0100 Subject: [PATCH 0501/1519] [ARM] 3044/1: Fix sparse warnings about incompatible pointer types for register defined in pxa-regs.h Patch from Ian Campbell The sparse warning initially surfaced in sound/arm/pxa2xx-ac97.c because it was using u32 * variables to hold the unsigned long * register addresses. I submitted an ALSA patch for this http://thread.gmane.org/gmane.linux.alsa.devel/27804 issue and it was suggested that it might be preferable to change the register definitions to use u32. Most other subarches seem to use u32 for their register type, at least the ones which use a __REG macro (like the PXA) do. Nico indicated in the thread above that he wouldn't mind this patch. Changing the type required fixes for opposite warnings in the pxa2xx usb gadget code but that was the only new warning introduced on defconfig or lubbock, mainstone and our own PXA255 boards. Signed-off-by: Ian Campbell Signed-off-by: Russell King --- drivers/usb/gadget/pxa2xx_udc.c | 2 +- drivers/usb/gadget/pxa2xx_udc.h | 8 ++++---- include/asm-arm/arch-pxa/hardware.h | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 73f8c9404156..feae7c0c5dd9 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -422,7 +422,7 @@ static inline void ep0_idle (struct pxa2xx_udc *dev) } static int -write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max) +write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max) { u8 *buf; unsigned length, count; diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index a58f3e6e71f1..19a883f7d1b8 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -69,11 +69,11 @@ struct pxa2xx_ep { * UDDR = UDC Endpoint Data Register (the fifo) * DRCM = DMA Request Channel Map */ - volatile unsigned long *reg_udccs; - volatile unsigned long *reg_ubcr; - volatile unsigned long *reg_uddr; + volatile u32 *reg_udccs; + volatile u32 *reg_ubcr; + volatile u32 *reg_uddr; #ifdef USE_DMA - volatile unsigned long *reg_drcmr; + volatile u32 *reg_drcmr; #define drcmr(n) .reg_drcmr = & DRCMR ## n , #else #define drcmr(n) diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index cf35721cfa45..3e70bd95472c 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -44,12 +44,12 @@ #ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile unsigned long *)io_p2v(x))) +# define __REG(x) (*((volatile u32 *)io_p2v(x))) /* With indexed regs we don't want to feed the index through io_p2v() especially if it is a variable, otherwise horrible code will result. */ # define __REG2(x,y) \ - (*(volatile unsigned long *)((unsigned long)&__REG(x) + (y))) + (*(volatile u32 *)((u32)&__REG(x) + (y))) # define __PREG(x) (io_v2p((u32)&(x))) -- GitLab From 3b90c9c33361d49893645ffcebe6ca230f434705 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 28 Oct 2005 15:31:45 +0100 Subject: [PATCH 0502/1519] [ARM] 2908/1: add register definitions for ixp2000 msf Patch from Lennert Buytenhek We already had a mapping for the msf, but we didn't have any register definitions for it yet. Signed-off-by: Lennert Buytenhek Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/ixp2000-regs.h | 43 +++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h index 32aece069869..def089d693d2 100644 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h @@ -392,4 +392,47 @@ #define WDT_RESET_ENABLE 0x01000000 +/* + * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF + * units, but the registers that differ between the two don't overlap, + * so we can have one register list for both. + */ +#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x))) +#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000) +#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004) +#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008) +#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c) +#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010) +#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014) +#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018) +#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024) +#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028) +#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c) +#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040) +#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044) +#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048) +#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058) +#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060) +#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064) +#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068) +#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070) +#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070) +#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080) +#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084) +#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088) +#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c) +#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090) +#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094) +#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098) +#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c) +#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0) +#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4) +#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8) +#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000) +#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400) + + #endif /* _IXP2000_H_ */ -- GitLab From 893b03094c2ed929648d76a29cbbfc9e215e8636 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 28 Oct 2005 15:31:45 +0100 Subject: [PATCH 0503/1519] [ARM] 3045/2: S3C2410 - change init for lcd platform data Patch from Ben Dooks Change set_s3c2410fb_info to s3c2410_fb_set_platdata and use kmalloc() for the copy of the information it is passed. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/devs.c | 16 ++++++++++------ arch/arm/mach-s3c2410/mach-h1940.c | 3 ++- include/asm-arm/arch-s3c2410/fb.h | 3 ++- 3 files changed, 14 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 8a37236b04ab..08bc7d95a45d 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -103,14 +103,18 @@ struct platform_device s3c_device_lcd = { EXPORT_SYMBOL(s3c_device_lcd); -static struct s3c2410fb_mach_info s3c2410fb_info; - -void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info) +void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) { - memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info)); - s3c_device_lcd.dev.platform_data = &s3c2410fb_info; + struct s3c2410fb_mach_info *npd; + + npd = kmalloc(sizeof(*npd), GFP_KERNEL); + if (npd) { + memcpy(npd, pd, sizeof(*npd)); + s3c_device_lcd.dev.platform_data = npd; + } else { + printk(KERN_ERR "no memory for LCD platform data\n"); + } } -EXPORT_SYMBOL(set_s3c2410fb_info); /* NAND Controller */ diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index fb3cb01266e5..7efeaaad2361 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -25,6 +25,7 @@ * 14-Jan-2005 BJD Added clock init * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 20-Sep-2005 BJD Added static to non-exported items + * 26-Oct-2005 BJD Changed name of fb init call */ #include @@ -164,7 +165,7 @@ static void __init h1940_init_irq(void) static void __init h1940_init(void) { - set_s3c2410fb_info(&h1940_lcdcfg); + s3c24xx_fb_set_platdata(&h1940_lcdcfg); } MACHINE_START(H1940, "IPAQ-H1940") diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h index ac57bc887d82..4790491ba9d0 100644 --- a/include/asm-arm/arch-s3c2410/fb.h +++ b/include/asm-arm/arch-s3c2410/fb.h @@ -13,6 +13,7 @@ * 07-Sep-2004 RTP Created file * 03-Nov-2004 BJD Updated and minor cleanups * 03-Aug-2005 RTP Renamed to fb.h + * 26-Oct-2005 BJD Changed name of platdata init */ #ifndef __ASM_ARM_FB_H @@ -64,6 +65,6 @@ struct s3c2410fb_mach_info { unsigned long lpcsel; }; -void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info); +extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); #endif /* __ASM_ARM_FB_H */ -- GitLab From 58c8d570f30d65836b53903fbdf355707a19aa52 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 28 Oct 2005 15:31:46 +0100 Subject: [PATCH 0504/1519] [ARM] 3046/1: BAST - add framebuffer platform data Patch from Ben Dooks Add framebuffer platform data Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-bast.c | 40 +++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 7b51bfd0ba6d..c1b5c63ec24a 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -32,6 +32,7 @@ * 25-Jul-2005 BJD Removed ASIX static mappings * 27-Jul-2005 BJD Ensure maximum frequency of i2c bus * 20-Sep-2005 BJD Added static to non-exported items + * 26-Oct-2005 BJD Added FB platform data */ #include @@ -61,8 +62,10 @@ #include #include #include + #include #include +#include #include #include @@ -399,6 +402,38 @@ static struct s3c2410_platform_i2c bast_i2c_info = { .max_freq = 130*1000, }; + +static struct s3c2410fb_mach_info __initdata bast_lcd_info = { + .width = 640, + .height = 480, + + .xres = { + .min = 320, + .max = 1024, + .defval = 640, + }, + + .yres = { + .min = 240, + .max = 600, + .defval = 480, + }, + + .bpp = { + .min = 4, + .max = 16, + .defval = 8, + }, + + .regs = { + .lcdcon1 = 0x00000176, + .lcdcon2 = 0x1d77c7c2, + .lcdcon3 = 0x013a7f13, + .lcdcon4 = 0x00000057, + .lcdcon5 = 0x00014b02, + } +}; + /* Standard BAST devices */ static struct platform_device *bast_devices[] __initdata = { @@ -454,6 +489,10 @@ static void __init bast_map_io(void) usb_simtec_init(); } +static void __init bast_init(void) +{ + s3c24xx_fb_set_platdata(&bast_lcd_info); +} MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks */ @@ -463,5 +502,6 @@ MACHINE_START(BAST, "Simtec-BAST") .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = bast_map_io, .init_irq = s3c24xx_init_irq, + .init_machine = bast_init, .timer = &s3c24xx_timer, MACHINE_END -- GitLab From 57718976141c2929bddd6219efb32c2abea8360c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 28 Oct 2005 15:31:47 +0100 Subject: [PATCH 0505/1519] [ARM] 3047/1: SMDK2440 - add framebuffer platform data Patch from Ben Dooks Add platform data for framebuffer for the onboard LCD module Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-smdk2440.c | 70 +++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index 722ef46b630a..6950e61b7914 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -19,6 +19,7 @@ * 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA * 14-Mar-2005 BJD void __iomem fixes * 20-Sep-2005 BJD Added static to non-exported items + * 26-Oct-2005 BJD Added framebuffer data */ #include @@ -41,7 +42,10 @@ //#include #include #include +#include + #include +#include #include "s3c2410.h" #include "s3c2440.h" @@ -86,6 +90,70 @@ static struct s3c2410_uartcfg smdk2440_uartcfgs[] = { } }; +/* LCD driver info */ + +static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = { + .regs = { + + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | + S3C2410_LCDCON1_TFT | + S3C2410_LCDCON1_CLKVAL(0x04), + + .lcdcon2 = S3C2410_LCDCON2_VBPD(7) | + S3C2410_LCDCON2_LINEVAL(319) | + S3C2410_LCDCON2_VFPD(6) | + S3C2410_LCDCON2_VSPW(3), + + .lcdcon3 = S3C2410_LCDCON3_HBPD(19) | + S3C2410_LCDCON3_HOZVAL(239) | + S3C2410_LCDCON3_HFPD(7), + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | + S3C2410_LCDCON4_HSPW(3), + + .lcdcon5 = S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_PWREN | + S3C2410_LCDCON5_HWSWP, + }, + +#if 0 + /* currently setup by downloader */ + .gpccon = 0xaa940659, + .gpccon_mask = 0xffffffff, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + .gpdcon = 0xaa84aaa0, + .gpdcon_mask = 0xffffffff, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, +#endif + + .lpcsel = ((0xCE6) & ~7) | 1<<4, + + .width = 240, + .height = 320, + + .xres = { + .min = 240, + .max = 240, + .defval = 240, + }, + + .yres = { + .min = 320, + .max = 320, + .defval = 320, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + static struct platform_device *smdk2440_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, @@ -121,6 +189,8 @@ static void __init smdk2440_machine_init(void) s3c2410_gpio_setpin(S3C2410_GPF6, 0); s3c2410_gpio_setpin(S3C2410_GPF7, 0); + s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg); + s3c2410_pm_init(); } -- GitLab From b57235215933d5fde4013e2448223b934b4ac2b7 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 28 Oct 2005 15:31:48 +0100 Subject: [PATCH 0506/1519] [ARM] 3048/1: register i2s resources not i2c resources for the pxa i2s platform device Patch from Ian Campbell As noted by Uli Luckas in the comments of 3025 there is a typo in the i2s platform device. The i2s platform device refers to the i2c resources. Signed-off-by: Ian Campbell Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 2e9e1702c4b3..719b91e93fa2 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -293,7 +293,7 @@ static struct resource i2s_resources[] = { static struct platform_device i2s_device = { .name = "pxa2xx-i2s", .id = -1, - .resource = i2c_resources, + .resource = i2s_resources, .num_resources = ARRAY_SIZE(i2s_resources), }; -- GitLab From af4ca457eaf2d6682059c18463eb106e2ce58198 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 02:55:38 -0400 Subject: [PATCH 0507/1519] [PATCH] gfp_t: infrastructure Beginning of gfp_t annotations: - -Wbitwise added to CHECKFLAGS - old __bitwise renamed to __bitwise__ - __bitwise defined to either __bitwise__ or nothing, depending on __CHECK_ENDIAN__ being defined - gfp_t switched from __nocast to __bitwise__ - force cast to gfp_t added to __GFP_... constants - new helper - gfp_zone(); extracts zone bits out of gfp_t value and casts the result to int Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- Makefile | 2 +- fs/buffer.c | 2 +- include/linux/gfp.h | 39 ++++++++++++++++++++------------------- include/linux/types.h | 9 +++++++-- mm/mempolicy.c | 6 +++--- mm/page_alloc.c | 4 ++-- 6 files changed, 34 insertions(+), 28 deletions(-) diff --git a/Makefile b/Makefile index 1fa7e5343464..f1d121f23025 100644 --- a/Makefile +++ b/Makefile @@ -334,7 +334,7 @@ KALLSYMS = scripts/kallsyms PERL = perl CHECK = sparse -CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ $(CF) +CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF) MODFLAGS = -DMODULE CFLAGS_MODULE = $(MODFLAGS) AFLAGS_MODULE = $(MODFLAGS) diff --git a/fs/buffer.c b/fs/buffer.c index 1216c0d3c8ce..9657696fd6d7 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -502,7 +502,7 @@ static void free_more_memory(void) yield(); for_each_pgdat(pgdat) { - zones = pgdat->node_zonelists[GFP_NOFS&GFP_ZONEMASK].zones; + zones = pgdat->node_zonelists[gfp_zone(GFP_NOFS)].zones; if (*zones) try_to_free_pages(zones, GFP_NOFS); } diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 3010e172394d..c3779432a723 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -12,8 +12,8 @@ struct vm_area_struct; * GFP bitmasks.. */ /* Zone modifiers in GFP_ZONEMASK (see linux/mmzone.h - low two bits) */ -#define __GFP_DMA 0x01u -#define __GFP_HIGHMEM 0x02u +#define __GFP_DMA ((__force gfp_t)0x01u) +#define __GFP_HIGHMEM ((__force gfp_t)0x02u) /* * Action modifiers - doesn't change the zoning @@ -26,24 +26,24 @@ struct vm_area_struct; * * __GFP_NORETRY: The VM implementation must not retry indefinitely. */ -#define __GFP_WAIT 0x10u /* Can wait and reschedule? */ -#define __GFP_HIGH 0x20u /* Should access emergency pools? */ -#define __GFP_IO 0x40u /* Can start physical IO? */ -#define __GFP_FS 0x80u /* Can call down to low-level FS? */ -#define __GFP_COLD 0x100u /* Cache-cold page required */ -#define __GFP_NOWARN 0x200u /* Suppress page allocation failure warning */ -#define __GFP_REPEAT 0x400u /* Retry the allocation. Might fail */ -#define __GFP_NOFAIL 0x800u /* Retry for ever. Cannot fail */ -#define __GFP_NORETRY 0x1000u /* Do not retry. Might fail */ -#define __GFP_NO_GROW 0x2000u /* Slab internal usage */ -#define __GFP_COMP 0x4000u /* Add compound page metadata */ -#define __GFP_ZERO 0x8000u /* Return zeroed page on success */ -#define __GFP_NOMEMALLOC 0x10000u /* Don't use emergency reserves */ -#define __GFP_NORECLAIM 0x20000u /* No realy zone reclaim during allocation */ -#define __GFP_HARDWALL 0x40000u /* Enforce hardwall cpuset memory allocs */ +#define __GFP_WAIT ((__force gfp_t)0x10u) /* Can wait and reschedule? */ +#define __GFP_HIGH ((__force gfp_t)0x20u) /* Should access emergency pools? */ +#define __GFP_IO ((__force gfp_t)0x40u) /* Can start physical IO? */ +#define __GFP_FS ((__force gfp_t)0x80u) /* Can call down to low-level FS? */ +#define __GFP_COLD ((__force gfp_t)0x100u) /* Cache-cold page required */ +#define __GFP_NOWARN ((__force gfp_t)0x200u) /* Suppress page allocation failure warning */ +#define __GFP_REPEAT ((__force gfp_t)0x400u) /* Retry the allocation. Might fail */ +#define __GFP_NOFAIL ((__force gfp_t)0x800u) /* Retry for ever. Cannot fail */ +#define __GFP_NORETRY ((__force gfp_t)0x1000u)/* Do not retry. Might fail */ +#define __GFP_NO_GROW ((__force gfp_t)0x2000u)/* Slab internal usage */ +#define __GFP_COMP ((__force gfp_t)0x4000u)/* Add compound page metadata */ +#define __GFP_ZERO ((__force gfp_t)0x8000u)/* Return zeroed page on success */ +#define __GFP_NOMEMALLOC ((__force gfp_t)0x10000u) /* Don't use emergency reserves */ +#define __GFP_NORECLAIM ((__force gfp_t)0x20000u) /* No realy zone reclaim during allocation */ +#define __GFP_HARDWALL ((__force gfp_t)0x40000u) /* Enforce hardwall cpuset memory allocs */ #define __GFP_BITS_SHIFT 20 /* Room for 20 __GFP_FOO bits */ -#define __GFP_BITS_MASK ((1 << __GFP_BITS_SHIFT) - 1) +#define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1)) /* if you forget to add the bitmask here kernel will crash, period */ #define GFP_LEVEL_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS| \ @@ -64,6 +64,7 @@ struct vm_area_struct; #define GFP_DMA __GFP_DMA +#define gfp_zone(mask) ((__force int)((mask) & (__force gfp_t)GFP_ZONEMASK)) /* * There is only one page-allocator function, and two main namespaces to @@ -94,7 +95,7 @@ static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask, return NULL; return __alloc_pages(gfp_mask, order, - NODE_DATA(nid)->node_zonelists + (gfp_mask & GFP_ZONEMASK)); + NODE_DATA(nid)->node_zonelists + gfp_zone(gfp_mask)); } #ifdef CONFIG_NUMA diff --git a/include/linux/types.h b/include/linux/types.h index 0aee34f9da9f..21b9ce803644 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -151,7 +151,12 @@ typedef unsigned long sector_t; */ #ifdef __CHECKER__ -#define __bitwise __attribute__((bitwise)) +#define __bitwise__ __attribute__((bitwise)) +#else +#define __bitwise__ +#endif +#ifdef __CHECK_ENDIAN__ +#define __bitwise __bitwise__ #else #define __bitwise #endif @@ -166,7 +171,7 @@ typedef __u64 __bitwise __be64; #endif #ifdef __KERNEL__ -typedef unsigned __nocast gfp_t; +typedef unsigned __bitwise__ gfp_t; #endif struct ustat { diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 37af443eb094..1d5c64df1653 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -700,7 +700,7 @@ static struct zonelist *zonelist_policy(gfp_t gfp, struct mempolicy *policy) case MPOL_BIND: /* Lower zones don't get a policy applied */ /* Careful: current->mems_allowed might have moved */ - if ((gfp & GFP_ZONEMASK) >= policy_zone) + if (gfp_zone(gfp) >= policy_zone) if (cpuset_zonelist_valid_mems_allowed(policy->v.zonelist)) return policy->v.zonelist; /*FALL THROUGH*/ @@ -712,7 +712,7 @@ static struct zonelist *zonelist_policy(gfp_t gfp, struct mempolicy *policy) nd = 0; BUG(); } - return NODE_DATA(nd)->node_zonelists + (gfp & GFP_ZONEMASK); + return NODE_DATA(nd)->node_zonelists + gfp_zone(gfp); } /* Do dynamic interleaving for a process */ @@ -757,7 +757,7 @@ static struct page *alloc_page_interleave(gfp_t gfp, unsigned order, unsigned ni struct page *page; BUG_ON(!node_online(nid)); - zl = NODE_DATA(nid)->node_zonelists + (gfp & GFP_ZONEMASK); + zl = NODE_DATA(nid)->node_zonelists + gfp_zone(gfp); page = __alloc_pages(gfp, order, zl); if (page && page_zone(page) == zl->zones[0]) { zone_pcp(zl->zones[0],get_cpu())->interleave_hit++; diff --git a/mm/page_alloc.c b/mm/page_alloc.c index e1d3d77f4aee..aa43ae3ab8c9 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1089,7 +1089,7 @@ static unsigned int nr_free_zone_pages(int offset) */ unsigned int nr_free_buffer_pages(void) { - return nr_free_zone_pages(GFP_USER & GFP_ZONEMASK); + return nr_free_zone_pages(gfp_zone(GFP_USER)); } /* @@ -1097,7 +1097,7 @@ unsigned int nr_free_buffer_pages(void) */ unsigned int nr_free_pagecache_pages(void) { - return nr_free_zone_pages(GFP_HIGHUSER & GFP_ZONEMASK); + return nr_free_zone_pages(gfp_zone(GFP_HIGHUSER)); } #ifdef CONFIG_HIGHMEM -- GitLab From 6daa0e28627abf362138244a620a821a9027d816 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:18:50 -0400 Subject: [PATCH 0508/1519] [PATCH] gfp_t: mm/* (easy parts) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 +- include/linux/pagemap.h | 6 +++--- include/linux/slab.h | 2 +- include/linux/swap.h | 4 ++-- mm/filemap.c | 8 ++++---- mm/mempool.c | 2 +- mm/shmem.c | 4 ++-- mm/slab.c | 8 ++++---- mm/vmscan.c | 8 ++++---- 9 files changed, 22 insertions(+), 22 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 097b3a3c693d..e1649578fb0c 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -747,7 +747,7 @@ extern unsigned long do_mremap(unsigned long addr, * The callback will be passed nr_to_scan == 0 when the VM is querying the * cache size, so a fastpath for that case is appropriate. */ -typedef int (*shrinker_t)(int nr_to_scan, unsigned int gfp_mask); +typedef int (*shrinker_t)(int nr_to_scan, gfp_t gfp_mask); /* * Add an aging callback. The int is the number of 'seeks' it takes diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index acbf31c154f8..efbae53fb078 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -69,7 +69,7 @@ extern struct page * find_lock_page(struct address_space *mapping, extern struct page * find_trylock_page(struct address_space *mapping, unsigned long index); extern struct page * find_or_create_page(struct address_space *mapping, - unsigned long index, unsigned int gfp_mask); + unsigned long index, gfp_t gfp_mask); unsigned find_get_pages(struct address_space *mapping, pgoff_t start, unsigned int nr_pages, struct page **pages); unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index, @@ -92,9 +92,9 @@ extern int read_cache_pages(struct address_space *mapping, struct list_head *pages, filler_t *filler, void *data); int add_to_page_cache(struct page *page, struct address_space *mapping, - unsigned long index, int gfp_mask); + unsigned long index, gfp_t gfp_mask); int add_to_page_cache_lru(struct page *page, struct address_space *mapping, - unsigned long index, int gfp_mask); + unsigned long index, gfp_t gfp_mask); extern void remove_from_page_cache(struct page *page); extern void __remove_from_page_cache(struct page *page); diff --git a/include/linux/slab.h b/include/linux/slab.h index 5fc04a16ecb0..09b9aa60063d 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -121,7 +121,7 @@ extern unsigned int ksize(const void *); extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node); extern void *kmalloc_node(size_t size, gfp_t flags, int node); #else -static inline void *kmem_cache_alloc_node(kmem_cache_t *cachep, int flags, int node) +static inline void *kmem_cache_alloc_node(kmem_cache_t *cachep, gfp_t flags, int node) { return kmem_cache_alloc(cachep, flags); } diff --git a/include/linux/swap.h b/include/linux/swap.h index a7bf1a3b1496..20c975642cab 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -171,8 +171,8 @@ extern int rotate_reclaimable_page(struct page *page); extern void swap_setup(void); /* linux/mm/vmscan.c */ -extern int try_to_free_pages(struct zone **, unsigned int); -extern int zone_reclaim(struct zone *, unsigned int, unsigned int); +extern int try_to_free_pages(struct zone **, gfp_t); +extern int zone_reclaim(struct zone *, gfp_t, unsigned int); extern int shrink_all_memory(int); extern int vm_swappiness; diff --git a/mm/filemap.c b/mm/filemap.c index b5346576e58d..1c31b2fd2ca5 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -377,7 +377,7 @@ int filemap_write_and_wait_range(struct address_space *mapping, * This function does not add the page to the LRU. The caller must do that. */ int add_to_page_cache(struct page *page, struct address_space *mapping, - pgoff_t offset, int gfp_mask) + pgoff_t offset, gfp_t gfp_mask) { int error = radix_tree_preload(gfp_mask & ~__GFP_HIGHMEM); @@ -401,7 +401,7 @@ int add_to_page_cache(struct page *page, struct address_space *mapping, EXPORT_SYMBOL(add_to_page_cache); int add_to_page_cache_lru(struct page *page, struct address_space *mapping, - pgoff_t offset, int gfp_mask) + pgoff_t offset, gfp_t gfp_mask) { int ret = add_to_page_cache(page, mapping, offset, gfp_mask); if (ret == 0) @@ -591,7 +591,7 @@ EXPORT_SYMBOL(find_lock_page); * memory exhaustion. */ struct page *find_or_create_page(struct address_space *mapping, - unsigned long index, unsigned int gfp_mask) + unsigned long index, gfp_t gfp_mask) { struct page *page, *cached_page = NULL; int err; @@ -683,7 +683,7 @@ struct page * grab_cache_page_nowait(struct address_space *mapping, unsigned long index) { struct page *page = find_get_page(mapping, index); - unsigned int gfp_mask; + gfp_t gfp_mask; if (page) { if (!TestSetPageLocked(page)) diff --git a/mm/mempool.c b/mm/mempool.c index 9e377ea700b2..1a99b80480d3 100644 --- a/mm/mempool.c +++ b/mm/mempool.c @@ -205,7 +205,7 @@ void * mempool_alloc(mempool_t *pool, gfp_t gfp_mask) void *element; unsigned long flags; wait_queue_t wait; - unsigned int gfp_temp; + gfp_t gfp_temp; might_sleep_if(gfp_mask & __GFP_WAIT); diff --git a/mm/shmem.c b/mm/shmem.c index ea064d89cda9..55e04a0734c1 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -85,7 +85,7 @@ enum sgp_type { static int shmem_getpage(struct inode *inode, unsigned long idx, struct page **pagep, enum sgp_type sgp, int *type); -static inline struct page *shmem_dir_alloc(unsigned int gfp_mask) +static inline struct page *shmem_dir_alloc(gfp_t gfp_mask) { /* * The above definition of ENTRIES_PER_PAGE, and the use of @@ -898,7 +898,7 @@ struct page *shmem_swapin(struct shmem_inode_info *info, swp_entry_t entry, } static struct page * -shmem_alloc_page(unsigned long gfp, struct shmem_inode_info *info, +shmem_alloc_page(gfp_t gfp, struct shmem_inode_info *info, unsigned long idx) { struct vm_area_struct pvma; diff --git a/mm/slab.c b/mm/slab.c index d05c678bceb3..d30423f167a2 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -386,7 +386,7 @@ struct kmem_cache_s { unsigned int gfporder; /* force GFP flags, e.g. GFP_DMA */ - unsigned int gfpflags; + gfp_t gfpflags; size_t colour; /* cache colouring range */ unsigned int colour_off; /* colour offset */ @@ -2117,7 +2117,7 @@ static void cache_init_objs(kmem_cache_t *cachep, slabp->free = 0; } -static void kmem_flagcheck(kmem_cache_t *cachep, unsigned int flags) +static void kmem_flagcheck(kmem_cache_t *cachep, gfp_t flags) { if (flags & SLAB_DMA) { if (!(cachep->gfpflags & GFP_DMA)) @@ -2152,7 +2152,7 @@ static int cache_grow(kmem_cache_t *cachep, gfp_t flags, int nodeid) struct slab *slabp; void *objp; size_t offset; - unsigned int local_flags; + gfp_t local_flags; unsigned long ctor_flags; struct kmem_list3 *l3; @@ -2546,7 +2546,7 @@ static inline void *__cache_alloc(kmem_cache_t *cachep, gfp_t flags) /* * A interface to enable slab creation on nodeid */ -static void *__cache_alloc_node(kmem_cache_t *cachep, int flags, int nodeid) +static void *__cache_alloc_node(kmem_cache_t *cachep, gfp_t flags, int nodeid) { struct list_head *entry; struct slab *slabp; diff --git a/mm/vmscan.c b/mm/vmscan.c index 64f9570cff56..843c87d1e61f 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -70,7 +70,7 @@ struct scan_control { unsigned int priority; /* This context's GFP mask */ - unsigned int gfp_mask; + gfp_t gfp_mask; int may_writepage; @@ -186,7 +186,7 @@ EXPORT_SYMBOL(remove_shrinker); * * Returns the number of slab objects which we shrunk. */ -static int shrink_slab(unsigned long scanned, unsigned int gfp_mask, +static int shrink_slab(unsigned long scanned, gfp_t gfp_mask, unsigned long lru_pages) { struct shrinker *shrinker; @@ -926,7 +926,7 @@ shrink_caches(struct zone **zones, struct scan_control *sc) * holds filesystem locks which prevent writeout this might not work, and the * allocation attempt will fail. */ -int try_to_free_pages(struct zone **zones, unsigned int gfp_mask) +int try_to_free_pages(struct zone **zones, gfp_t gfp_mask) { int priority; int ret = 0; @@ -1338,7 +1338,7 @@ module_init(kswapd_init) /* * Try to free up some pages from this zone through reclaim. */ -int zone_reclaim(struct zone *zone, unsigned int gfp_mask, unsigned int order) +int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) { struct scan_control sc; int nr_pages = 1 << order; -- GitLab From fd4f2df24bc23e6b8fc069765b425c7dacf52347 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:18:50 -0400 Subject: [PATCH 0509/1519] [PATCH] gfp_t: lib/* Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/idr.h | 2 +- include/linux/kobject.h | 2 +- include/linux/radix-tree.h | 2 +- include/linux/textsearch.h | 4 ++-- lib/idr.c | 2 +- lib/kobject.c | 2 +- lib/kobject_uevent.c | 4 ++-- lib/textsearch.c | 2 +- 8 files changed, 10 insertions(+), 10 deletions(-) diff --git a/include/linux/idr.h b/include/linux/idr.h index 3d5de45f961b..7fb3ff9c7b0e 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -71,7 +71,7 @@ struct idr { */ void *idr_find(struct idr *idp, int id); -int idr_pre_get(struct idr *idp, unsigned gfp_mask); +int idr_pre_get(struct idr *idp, gfp_t gfp_mask); int idr_get_new(struct idr *idp, void *ptr, int *id); int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id); void idr_remove(struct idr *idp, int id); diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 3b22304f12fd..7f7403aa4a41 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -65,7 +65,7 @@ extern void kobject_unregister(struct kobject *); extern struct kobject * kobject_get(struct kobject *); extern void kobject_put(struct kobject *); -extern char * kobject_get_path(struct kobject *, int); +extern char * kobject_get_path(struct kobject *, gfp_t); struct kobj_type { void (*release)(struct kobject *); diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h index 045d4761febc..9f0f9281f42a 100644 --- a/include/linux/radix-tree.h +++ b/include/linux/radix-tree.h @@ -24,7 +24,7 @@ struct radix_tree_root { unsigned int height; - unsigned int gfp_mask; + gfp_t gfp_mask; struct radix_tree_node *rnode; }; diff --git a/include/linux/textsearch.h b/include/linux/textsearch.h index 515046d1b2f4..fc5bb4e91a58 100644 --- a/include/linux/textsearch.h +++ b/include/linux/textsearch.h @@ -40,7 +40,7 @@ struct ts_state struct ts_ops { const char *name; - struct ts_config * (*init)(const void *, unsigned int, int); + struct ts_config * (*init)(const void *, unsigned int, gfp_t); unsigned int (*find)(struct ts_config *, struct ts_state *); void (*destroy)(struct ts_config *); @@ -148,7 +148,7 @@ static inline unsigned int textsearch_get_pattern_len(struct ts_config *conf) extern int textsearch_register(struct ts_ops *); extern int textsearch_unregister(struct ts_ops *); extern struct ts_config *textsearch_prepare(const char *, const void *, - unsigned int, int, int); + unsigned int, gfp_t, int); extern void textsearch_destroy(struct ts_config *conf); extern unsigned int textsearch_find_continuous(struct ts_config *, struct ts_state *, diff --git a/lib/idr.c b/lib/idr.c index d4df21debc4d..6414b2fb482d 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -72,7 +72,7 @@ static void free_layer(struct idr *idp, struct idr_layer *p) * If the system is REALLY out of memory this function returns 0, * otherwise 1. */ -int idr_pre_get(struct idr *idp, unsigned gfp_mask) +int idr_pre_get(struct idr *idp, gfp_t gfp_mask) { while (idp->id_free_cnt < IDR_FREE_MAX) { struct idr_layer *new; diff --git a/lib/kobject.c b/lib/kobject.c index dd0917dd9fa9..253d3004ace9 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -100,7 +100,7 @@ static void fill_kobj_path(struct kobject *kobj, char *path, int length) * @kobj: kobject in question, with which to build the path * @gfp_mask: the allocation type used to allocate the path */ -char *kobject_get_path(struct kobject *kobj, int gfp_mask) +char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask) { char *path; int len; diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 04ca4429ddfa..7ef6f6a17aa6 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -62,7 +62,7 @@ static struct sock *uevent_sock; * @gfp_mask: */ static int send_uevent(const char *signal, const char *obj, - char **envp, int gfp_mask) + char **envp, gfp_t gfp_mask) { struct sk_buff *skb; char *pos; @@ -98,7 +98,7 @@ static int send_uevent(const char *signal, const char *obj, } static int do_kobject_uevent(struct kobject *kobj, enum kobject_action action, - struct attribute *attr, int gfp_mask) + struct attribute *attr, gfp_t gfp_mask) { char *path; char *attrpath; diff --git a/lib/textsearch.c b/lib/textsearch.c index 1e934c196f0f..6f3093efbd7b 100644 --- a/lib/textsearch.c +++ b/lib/textsearch.c @@ -254,7 +254,7 @@ unsigned int textsearch_find_continuous(struct ts_config *conf, * parameters or a ERR_PTR(). */ struct ts_config *textsearch_prepare(const char *algo, const void *pattern, - unsigned int len, int gfp_mask, int flags) + unsigned int len, gfp_t gfp_mask, int flags) { int err = -ENOENT; struct ts_config *conf; -- GitLab From 7d877f3bda870ab5f001bd92528654471d5966b3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:20:43 -0400 Subject: [PATCH 0510/1519] [PATCH] gfp_t: net/* Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/security.h | 2 +- include/net/sock.h | 2 +- net/core/sock.c | 2 +- net/dccp/output.c | 2 +- net/netlink/af_netlink.c | 2 +- security/dummy.c | 2 +- security/selinux/hooks.c | 4 ++-- 7 files changed, 8 insertions(+), 8 deletions(-) diff --git a/include/linux/security.h b/include/linux/security.h index 627382e74057..dac956ed98f0 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1210,7 +1210,7 @@ struct security_operations { int (*socket_shutdown) (struct socket * sock, int how); int (*socket_sock_rcv_skb) (struct sock * sk, struct sk_buff * skb); int (*socket_getpeersec) (struct socket *sock, char __user *optval, int __user *optlen, unsigned len); - int (*sk_alloc_security) (struct sock *sk, int family, int priority); + int (*sk_alloc_security) (struct sock *sk, int family, gfp_t priority); void (*sk_free_security) (struct sock *sk); #endif /* CONFIG_SECURITY_NETWORK */ }; diff --git a/include/net/sock.h b/include/net/sock.h index ecb75526cba0..e0498bd36004 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -207,7 +207,7 @@ struct sock { struct sk_buff_head sk_write_queue; int sk_wmem_queued; int sk_forward_alloc; - unsigned int sk_allocation; + gfp_t sk_allocation; int sk_sndbuf; int sk_route_caps; unsigned long sk_flags; diff --git a/net/core/sock.c b/net/core/sock.c index 1c52fe809eda..9602ceb3bac9 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -940,7 +940,7 @@ static struct sk_buff *sock_alloc_send_pskb(struct sock *sk, int noblock, int *errcode) { struct sk_buff *skb; - unsigned int gfp_mask; + gfp_t gfp_mask; long timeo; int err; diff --git a/net/dccp/output.c b/net/dccp/output.c index 29250749f16f..d59f86f7ceab 100644 --- a/net/dccp/output.c +++ b/net/dccp/output.c @@ -495,7 +495,7 @@ void dccp_send_close(struct sock *sk, const int active) { struct dccp_sock *dp = dccp_sk(sk); struct sk_buff *skb; - const unsigned int prio = active ? GFP_KERNEL : GFP_ATOMIC; + const gfp_t prio = active ? GFP_KERNEL : GFP_ATOMIC; skb = alloc_skb(sk->sk_prot->max_header, prio); if (skb == NULL) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 678c3f2c0d0b..291df2e4c492 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -827,7 +827,7 @@ struct netlink_broadcast_data { int failure; int congested; int delivered; - unsigned int allocation; + gfp_t allocation; struct sk_buff *skb, *skb2; }; diff --git a/security/dummy.c b/security/dummy.c index 9623a61dfc76..3d34f3de7e82 100644 --- a/security/dummy.c +++ b/security/dummy.c @@ -768,7 +768,7 @@ static int dummy_socket_getpeersec(struct socket *sock, char __user *optval, return -ENOPROTOOPT; } -static inline int dummy_sk_alloc_security (struct sock *sk, int family, int priority) +static inline int dummy_sk_alloc_security (struct sock *sk, int family, gfp_t priority) { return 0; } diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index b13be15165f5..447a1e0f48cb 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -262,7 +262,7 @@ static void superblock_free_security(struct super_block *sb) } #ifdef CONFIG_SECURITY_NETWORK -static int sk_alloc_security(struct sock *sk, int family, int priority) +static int sk_alloc_security(struct sock *sk, int family, gfp_t priority) { struct sk_security_struct *ssec; @@ -3380,7 +3380,7 @@ static int selinux_socket_getpeersec(struct socket *sock, char __user *optval, return err; } -static int selinux_sk_alloc_security(struct sock *sk, int family, int priority) +static int selinux_sk_alloc_security(struct sock *sk, int family, gfp_t priority) { return sk_alloc_security(sk, family, priority); } -- GitLab From 27496a8c67bef4d789d8e3c8317ca35813a507ae Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:20:48 -0400 Subject: [PATCH 0511/1519] [PATCH] gfp_t: fs/* - ->releasepage() annotated (s/int/gfp_t), instances updated - missing gfp_t in fs/* added - fixed misannotation from the original sweep caught by bitwise checks: XFS used __nocast both for gfp_t and for flags used by XFS allocator. The latter left with unsigned int __nocast; we might want to add a different type for those but for now let's leave them alone. That, BTW, is a case when __nocast use had been actively confusing - it had been used in the same code for two different and similar types, with no way to catch misuses. Switch of gfp_t to bitwise had caught that immediately... One tricky bit is left alone to be dealt with later - mapping->flags is a mix of gfp_t and error indications. Left alone for now. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- fs/afs/file.c | 4 ++-- fs/bio.c | 4 ++-- fs/buffer.c | 2 +- fs/dcache.c | 2 +- fs/dquot.c | 2 +- fs/ext3/inode.c | 2 +- fs/hfs/inode.c | 2 +- fs/hfsplus/inode.c | 2 +- fs/inode.c | 2 +- fs/jbd/journal.c | 2 +- fs/jbd/transaction.c | 2 +- fs/jfs/jfs_metapage.c | 4 ++-- fs/mbcache.c | 6 +++--- fs/reiserfs/fix_node.c | 2 +- fs/reiserfs/inode.c | 2 +- fs/xfs/linux-2.6/kmem.c | 22 +++++++++++----------- fs/xfs/linux-2.6/kmem.h | 18 +++++++++--------- fs/xfs/linux-2.6/xfs_aops.c | 2 +- fs/xfs/linux-2.6/xfs_buf.c | 8 ++++---- include/linux/bio.h | 2 +- include/linux/buffer_head.h | 2 +- include/linux/fs.h | 2 +- include/linux/jbd.h | 4 ++-- include/linux/mbcache.h | 2 +- include/linux/reiserfs_fs.h | 2 +- 25 files changed, 52 insertions(+), 52 deletions(-) diff --git a/fs/afs/file.c b/fs/afs/file.c index 23c125128024..0d576987ec67 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -29,7 +29,7 @@ static int afs_file_release(struct inode *inode, struct file *file); static int afs_file_readpage(struct file *file, struct page *page); static int afs_file_invalidatepage(struct page *page, unsigned long offset); -static int afs_file_releasepage(struct page *page, int gfp_flags); +static int afs_file_releasepage(struct page *page, gfp_t gfp_flags); static ssize_t afs_file_write(struct file *file, const char __user *buf, size_t size, loff_t *off); @@ -279,7 +279,7 @@ static int afs_file_invalidatepage(struct page *page, unsigned long offset) /* * release a page and cleanup its private data */ -static int afs_file_releasepage(struct page *page, int gfp_flags) +static int afs_file_releasepage(struct page *page, gfp_t gfp_flags) { struct cachefs_page *pageio; diff --git a/fs/bio.c b/fs/bio.c index 7d81a93afd48..460554b07ff9 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -778,7 +778,7 @@ static int bio_map_kern_endio(struct bio *bio, unsigned int bytes_done, int err) static struct bio *__bio_map_kern(request_queue_t *q, void *data, - unsigned int len, unsigned int gfp_mask) + unsigned int len, gfp_t gfp_mask) { unsigned long kaddr = (unsigned long)data; unsigned long end = (kaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT; @@ -825,7 +825,7 @@ static struct bio *__bio_map_kern(request_queue_t *q, void *data, * device. Returns an error pointer in case of error. */ struct bio *bio_map_kern(request_queue_t *q, void *data, unsigned int len, - unsigned int gfp_mask) + gfp_t gfp_mask) { struct bio *bio; diff --git a/fs/buffer.c b/fs/buffer.c index 9657696fd6d7..b1667986442f 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1571,7 +1571,7 @@ static inline void discard_buffer(struct buffer_head * bh) * * NOTE: @gfp_mask may go away, and this function may become non-blocking. */ -int try_to_release_page(struct page *page, int gfp_mask) +int try_to_release_page(struct page *page, gfp_t gfp_mask) { struct address_space * const mapping = page->mapping; diff --git a/fs/dcache.c b/fs/dcache.c index fb10386c59be..e90512ed35a4 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -689,7 +689,7 @@ void shrink_dcache_anon(struct hlist_head *head) * * In this case we return -1 to tell the caller that we baled. */ -static int shrink_dcache_memory(int nr, unsigned int gfp_mask) +static int shrink_dcache_memory(int nr, gfp_t gfp_mask) { if (nr) { if (!(gfp_mask & __GFP_FS)) diff --git a/fs/dquot.c b/fs/dquot.c index b9732335bcdc..05f3327d64a3 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -500,7 +500,7 @@ static void prune_dqcache(int count) * more memory */ -static int shrink_dqcache_memory(int nr, unsigned int gfp_mask) +static int shrink_dqcache_memory(int nr, gfp_t gfp_mask) { if (nr) { spin_lock(&dq_list_lock); diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index b5177c90d6f1..8b38f2232796 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1434,7 +1434,7 @@ static int ext3_invalidatepage(struct page *page, unsigned long offset) return journal_invalidatepage(journal, page, offset); } -static int ext3_releasepage(struct page *page, int wait) +static int ext3_releasepage(struct page *page, gfp_t wait) { journal_t *journal = EXT3_JOURNAL(page->mapping->host); diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c index f1570b9f9de3..3f680c5675bf 100644 --- a/fs/hfs/inode.c +++ b/fs/hfs/inode.c @@ -46,7 +46,7 @@ static sector_t hfs_bmap(struct address_space *mapping, sector_t block) return generic_block_bmap(mapping, block, hfs_get_block); } -static int hfs_releasepage(struct page *page, int mask) +static int hfs_releasepage(struct page *page, gfp_t mask) { struct inode *inode = page->mapping->host; struct super_block *sb = inode->i_sb; diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c index d5642705f633..f205773ddfbe 100644 --- a/fs/hfsplus/inode.c +++ b/fs/hfsplus/inode.c @@ -40,7 +40,7 @@ static sector_t hfsplus_bmap(struct address_space *mapping, sector_t block) return generic_block_bmap(mapping, block, hfsplus_get_block); } -static int hfsplus_releasepage(struct page *page, int mask) +static int hfsplus_releasepage(struct page *page, gfp_t mask) { struct inode *inode = page->mapping->host; struct super_block *sb = inode->i_sb; diff --git a/fs/inode.c b/fs/inode.c index f80a79ff156b..7d3316527767 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -475,7 +475,7 @@ static void prune_icache(int nr_to_scan) * This function is passed the number of inodes to scan, and it returns the * total number of remaining possibly-reclaimable inodes. */ -static int shrink_icache_memory(int nr, unsigned int gfp_mask) +static int shrink_icache_memory(int nr, gfp_t gfp_mask) { if (nr) { /* diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 7ae2c4fe506b..e4b516ac4989 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -1606,7 +1606,7 @@ int journal_blocks_per_page(struct inode *inode) * Simple support for retrying memory allocations. Introduced to help to * debug different VM deadlock avoidance strategies. */ -void * __jbd_kmalloc (const char *where, size_t size, int flags, int retry) +void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry) { return kmalloc(size, flags | (retry ? __GFP_NOFAIL : 0)); } diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 49bbc2be3d72..13cb05bf6048 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -1621,7 +1621,7 @@ __journal_try_to_free_buffer(journal_t *journal, struct buffer_head *bh) * while the data is part of a transaction. Yes? */ int journal_try_to_free_buffers(journal_t *journal, - struct page *page, int unused_gfp_mask) + struct page *page, gfp_t unused_gfp_mask) { struct buffer_head *head; struct buffer_head *bh; diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c index 13d7e3f1feb4..eeb37d70e650 100644 --- a/fs/jfs/jfs_metapage.c +++ b/fs/jfs/jfs_metapage.c @@ -198,7 +198,7 @@ static void init_once(void *foo, kmem_cache_t *cachep, unsigned long flags) } } -static inline struct metapage *alloc_metapage(unsigned int gfp_mask) +static inline struct metapage *alloc_metapage(gfp_t gfp_mask) { return mempool_alloc(metapage_mempool, gfp_mask); } @@ -534,7 +534,7 @@ static int metapage_readpage(struct file *fp, struct page *page) return -EIO; } -static int metapage_releasepage(struct page *page, int gfp_mask) +static int metapage_releasepage(struct page *page, gfp_t gfp_mask) { struct metapage *mp; int busy = 0; diff --git a/fs/mbcache.c b/fs/mbcache.c index b002a088857d..298997f17475 100644 --- a/fs/mbcache.c +++ b/fs/mbcache.c @@ -116,7 +116,7 @@ mb_cache_indexes(struct mb_cache *cache) * What the mbcache registers as to get shrunk dynamically. */ -static int mb_cache_shrink_fn(int nr_to_scan, unsigned int gfp_mask); +static int mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask); static inline int @@ -140,7 +140,7 @@ __mb_cache_entry_unhash(struct mb_cache_entry *ce) static inline void -__mb_cache_entry_forget(struct mb_cache_entry *ce, int gfp_mask) +__mb_cache_entry_forget(struct mb_cache_entry *ce, gfp_t gfp_mask) { struct mb_cache *cache = ce->e_cache; @@ -193,7 +193,7 @@ __mb_cache_entry_release_unlock(struct mb_cache_entry *ce) * Returns the number of objects which are present in the cache. */ static int -mb_cache_shrink_fn(int nr_to_scan, unsigned int gfp_mask) +mb_cache_shrink_fn(int nr_to_scan, gfp_t gfp_mask) { LIST_HEAD(free_list); struct list_head *l, *ltmp; diff --git a/fs/reiserfs/fix_node.c b/fs/reiserfs/fix_node.c index 2706e2adffab..45829889dcdc 100644 --- a/fs/reiserfs/fix_node.c +++ b/fs/reiserfs/fix_node.c @@ -2022,7 +2022,7 @@ static int get_neighbors(struct tree_balance *p_s_tb, int n_h) } #ifdef CONFIG_REISERFS_CHECK -void *reiserfs_kmalloc(size_t size, int flags, struct super_block *s) +void *reiserfs_kmalloc(size_t size, gfp_t flags, struct super_block *s) { void *vp; static size_t malloced; diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index d76ee6c4f9b8..5f82352b97e1 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -2842,7 +2842,7 @@ static int reiserfs_set_page_dirty(struct page *page) * even in -o notail mode, we can't be sure an old mount without -o notail * didn't create files with tails. */ -static int reiserfs_releasepage(struct page *page, int unused_gfp_flags) +static int reiserfs_releasepage(struct page *page, gfp_t unused_gfp_flags) { struct inode *inode = page->mapping->host; struct reiserfs_journal *j = SB_JOURNAL(inode->i_sb); diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c index d2653b589b1c..3c92162dc728 100644 --- a/fs/xfs/linux-2.6/kmem.c +++ b/fs/xfs/linux-2.6/kmem.c @@ -45,11 +45,11 @@ void * -kmem_alloc(size_t size, gfp_t flags) +kmem_alloc(size_t size, unsigned int __nocast flags) { - int retries = 0; - unsigned int lflags = kmem_flags_convert(flags); - void *ptr; + int retries = 0; + gfp_t lflags = kmem_flags_convert(flags); + void *ptr; do { if (size < MAX_SLAB_SIZE || retries > MAX_VMALLOCS) @@ -67,7 +67,7 @@ kmem_alloc(size_t size, gfp_t flags) } void * -kmem_zalloc(size_t size, gfp_t flags) +kmem_zalloc(size_t size, unsigned int __nocast flags) { void *ptr; @@ -90,7 +90,7 @@ kmem_free(void *ptr, size_t size) void * kmem_realloc(void *ptr, size_t newsize, size_t oldsize, - gfp_t flags) + unsigned int __nocast flags) { void *new; @@ -105,11 +105,11 @@ kmem_realloc(void *ptr, size_t newsize, size_t oldsize, } void * -kmem_zone_alloc(kmem_zone_t *zone, gfp_t flags) +kmem_zone_alloc(kmem_zone_t *zone, unsigned int __nocast flags) { - int retries = 0; - unsigned int lflags = kmem_flags_convert(flags); - void *ptr; + int retries = 0; + gfp_t lflags = kmem_flags_convert(flags); + void *ptr; do { ptr = kmem_cache_alloc(zone, lflags); @@ -124,7 +124,7 @@ kmem_zone_alloc(kmem_zone_t *zone, gfp_t flags) } void * -kmem_zone_zalloc(kmem_zone_t *zone, gfp_t flags) +kmem_zone_zalloc(kmem_zone_t *zone, unsigned int __nocast flags) { void *ptr; diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h index ee7010f085bc..f4bb78c268c0 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/linux-2.6/kmem.h @@ -81,9 +81,9 @@ typedef unsigned long xfs_pflags_t; *(NSTATEP) = *(OSTATEP); \ } while (0) -static __inline unsigned int kmem_flags_convert(gfp_t flags) +static __inline gfp_t kmem_flags_convert(unsigned int __nocast flags) { - unsigned int lflags = __GFP_NOWARN; /* we'll report problems, if need be */ + gfp_t lflags = __GFP_NOWARN; /* we'll report problems, if need be */ #ifdef DEBUG if (unlikely(flags & ~(KM_SLEEP|KM_NOSLEEP|KM_NOFS|KM_MAYFAIL))) { @@ -125,16 +125,16 @@ kmem_zone_destroy(kmem_zone_t *zone) BUG(); } -extern void *kmem_zone_zalloc(kmem_zone_t *, gfp_t); -extern void *kmem_zone_alloc(kmem_zone_t *, gfp_t); +extern void *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast); +extern void *kmem_zone_alloc(kmem_zone_t *, unsigned int __nocast); -extern void *kmem_alloc(size_t, gfp_t); -extern void *kmem_realloc(void *, size_t, size_t, gfp_t); -extern void *kmem_zalloc(size_t, gfp_t); +extern void *kmem_alloc(size_t, unsigned int __nocast); +extern void *kmem_realloc(void *, size_t, size_t, unsigned int __nocast); +extern void *kmem_zalloc(size_t, unsigned int __nocast); extern void kmem_free(void *, size_t); typedef struct shrinker *kmem_shaker_t; -typedef int (*kmem_shake_func_t)(int, unsigned int); +typedef int (*kmem_shake_func_t)(int, gfp_t); static __inline kmem_shaker_t kmem_shake_register(kmem_shake_func_t sfunc) @@ -149,7 +149,7 @@ kmem_shake_deregister(kmem_shaker_t shrinker) } static __inline int -kmem_shake_allow(unsigned int gfp_mask) +kmem_shake_allow(gfp_t gfp_mask) { return (gfp_mask & __GFP_WAIT); } diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index c6c077978fe3..7aa398724706 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -1296,7 +1296,7 @@ linvfs_invalidate_page( STATIC int linvfs_release_page( struct page *page, - int gfp_mask) + gfp_t gfp_mask) { struct inode *inode = page->mapping->host; int dirty, delalloc, unmapped, unwritten; diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index e82cf72ac599..ba4767c04adf 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -64,7 +64,7 @@ STATIC kmem_cache_t *pagebuf_zone; STATIC kmem_shaker_t pagebuf_shake; -STATIC int xfsbufd_wakeup(int, unsigned int); +STATIC int xfsbufd_wakeup(int, gfp_t); STATIC void pagebuf_delwri_queue(xfs_buf_t *, int); STATIC struct workqueue_struct *xfslogd_workqueue; @@ -383,7 +383,7 @@ _pagebuf_lookup_pages( size_t blocksize = bp->pb_target->pbr_bsize; size_t size = bp->pb_count_desired; size_t nbytes, offset; - int gfp_mask = pb_to_gfp(flags); + gfp_t gfp_mask = pb_to_gfp(flags); unsigned short page_count, i; pgoff_t first; loff_t end; @@ -1749,8 +1749,8 @@ STATIC int xfsbufd_force_sleep; STATIC int xfsbufd_wakeup( - int priority, - unsigned int mask) + int priority, + gfp_t mask) { if (xfsbufd_force_sleep) return 0; diff --git a/include/linux/bio.h b/include/linux/bio.h index 3344b4e8e43a..685fd3720df5 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -301,7 +301,7 @@ extern struct bio *bio_map_user_iov(struct request_queue *, struct sg_iovec *, int, int); extern void bio_unmap_user(struct bio *); extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int, - unsigned int); + gfp_t); extern void bio_set_pages_dirty(struct bio *bio); extern void bio_check_pages_dirty(struct bio *bio); extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int); diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 6a1d154c0825..88af42f5e04a 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -188,7 +188,7 @@ extern int buffer_heads_over_limit; * Generic address_space_operations implementations for buffer_head-backed * address_spaces. */ -int try_to_release_page(struct page * page, int gfp_mask); +int try_to_release_page(struct page * page, gfp_t gfp_mask); int block_invalidatepage(struct page *page, unsigned long offset); int block_write_full_page(struct page *page, get_block_t *get_block, struct writeback_control *wbc); diff --git a/include/linux/fs.h b/include/linux/fs.h index e0b77c5af9a0..f83d997c5582 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -320,7 +320,7 @@ struct address_space_operations { /* Unfortunately this kludge is needed for FIBMAP. Don't use it */ sector_t (*bmap)(struct address_space *, sector_t); int (*invalidatepage) (struct page *, unsigned long); - int (*releasepage) (struct page *, int); + int (*releasepage) (struct page *, gfp_t); ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov, loff_t offset, unsigned long nr_segs); struct page* (*get_xip_page)(struct address_space *, sector_t, diff --git a/include/linux/jbd.h b/include/linux/jbd.h index ff853b3173c6..be197eb90077 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -69,7 +69,7 @@ extern int journal_enable_debug; #define jbd_debug(f, a...) /**/ #endif -extern void * __jbd_kmalloc (const char *where, size_t size, int flags, int retry); +extern void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry); #define jbd_kmalloc(size, flags) \ __jbd_kmalloc(__FUNCTION__, (size), (flags), journal_oom_retry) #define jbd_rep_kmalloc(size, flags) \ @@ -890,7 +890,7 @@ extern int journal_forget (handle_t *, struct buffer_head *); extern void journal_sync_buffer (struct buffer_head *); extern int journal_invalidatepage(journal_t *, struct page *, unsigned long); -extern int journal_try_to_free_buffers(journal_t *, struct page *, int); +extern int journal_try_to_free_buffers(journal_t *, struct page *, gfp_t); extern int journal_stop(handle_t *); extern int journal_flush (journal_t *); extern void journal_lock_updates (journal_t *); diff --git a/include/linux/mbcache.h b/include/linux/mbcache.h index 9263d2db2d67..99e044b4efc6 100644 --- a/include/linux/mbcache.h +++ b/include/linux/mbcache.h @@ -22,7 +22,7 @@ struct mb_cache_entry { }; struct mb_cache_op { - int (*free)(struct mb_cache_entry *, int); + int (*free)(struct mb_cache_entry *, gfp_t); }; /* Functions on caches */ diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index af00b10294cd..001ab82df051 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -1972,7 +1972,7 @@ extern struct address_space_operations reiserfs_address_space_operations; /* fix_nodes.c */ #ifdef CONFIG_REISERFS_CHECK -void *reiserfs_kmalloc(size_t size, int flags, struct super_block *s); +void *reiserfs_kmalloc(size_t size, gfp_t flags, struct super_block *s); void reiserfs_kfree(const void *vp, size_t size, struct super_block *s); #else static inline void *reiserfs_kmalloc(size_t size, int flags, -- GitLab From 8267e268e0914ac9371d07f711fcf20cc572993c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:20:53 -0400 Subject: [PATCH 0512/1519] [PATCH] gfp_t: block layer core Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/block/as-iosched.c | 2 +- drivers/block/cfq-iosched.c | 8 ++++---- drivers/block/deadline-iosched.c | 2 +- drivers/block/elevator.c | 2 +- drivers/block/ll_rw_blk.c | 16 ++++++++-------- include/linux/blkdev.h | 14 +++++++------- include/linux/elevator.h | 4 ++-- 7 files changed, 24 insertions(+), 24 deletions(-) diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c index 95c0a3690b0f..1f08e14697e9 100644 --- a/drivers/block/as-iosched.c +++ b/drivers/block/as-iosched.c @@ -1807,7 +1807,7 @@ static void as_put_request(request_queue_t *q, struct request *rq) } static int as_set_request(request_queue_t *q, struct request *rq, - struct bio *bio, int gfp_mask) + struct bio *bio, gfp_t gfp_mask) { struct as_data *ad = q->elevator->elevator_data; struct as_rq *arq = mempool_alloc(ad->arq_pool, gfp_mask); diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c index cd056e7e64ec..d3bfe8cfb039 100644 --- a/drivers/block/cfq-iosched.c +++ b/drivers/block/cfq-iosched.c @@ -1422,7 +1422,7 @@ static void cfq_exit_io_context(struct cfq_io_context *cic) } static struct cfq_io_context * -cfq_alloc_io_context(struct cfq_data *cfqd, int gfp_mask) +cfq_alloc_io_context(struct cfq_data *cfqd, gfp_t gfp_mask) { struct cfq_io_context *cic = kmem_cache_alloc(cfq_ioc_pool, gfp_mask); @@ -1517,7 +1517,7 @@ static int cfq_ioc_set_ioprio(struct io_context *ioc, unsigned int ioprio) static struct cfq_queue * cfq_get_queue(struct cfq_data *cfqd, unsigned int key, unsigned short ioprio, - int gfp_mask) + gfp_t gfp_mask) { const int hashval = hash_long(key, CFQ_QHASH_SHIFT); struct cfq_queue *cfqq, *new_cfqq = NULL; @@ -1578,7 +1578,7 @@ cfq_get_queue(struct cfq_data *cfqd, unsigned int key, unsigned short ioprio, * cfqq, so we don't need to worry about it disappearing */ static struct cfq_io_context * -cfq_get_io_context(struct cfq_data *cfqd, pid_t pid, int gfp_mask) +cfq_get_io_context(struct cfq_data *cfqd, pid_t pid, gfp_t gfp_mask) { struct io_context *ioc = NULL; struct cfq_io_context *cic; @@ -2075,7 +2075,7 @@ static void cfq_put_request(request_queue_t *q, struct request *rq) */ static int cfq_set_request(request_queue_t *q, struct request *rq, struct bio *bio, - int gfp_mask) + gfp_t gfp_mask) { struct cfq_data *cfqd = q->elevator->elevator_data; struct task_struct *tsk = current; diff --git a/drivers/block/deadline-iosched.c b/drivers/block/deadline-iosched.c index 52a3ae5289a0..753546ba2262 100644 --- a/drivers/block/deadline-iosched.c +++ b/drivers/block/deadline-iosched.c @@ -756,7 +756,7 @@ static void deadline_put_request(request_queue_t *q, struct request *rq) static int deadline_set_request(request_queue_t *q, struct request *rq, struct bio *bio, - int gfp_mask) + gfp_t gfp_mask) { struct deadline_data *dd = q->elevator->elevator_data; struct deadline_rq *drq; diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c index 98f0126a2deb..c744d2a13062 100644 --- a/drivers/block/elevator.c +++ b/drivers/block/elevator.c @@ -487,7 +487,7 @@ struct request *elv_former_request(request_queue_t *q, struct request *rq) } int elv_set_request(request_queue_t *q, struct request *rq, struct bio *bio, - int gfp_mask) + gfp_t gfp_mask) { elevator_t *e = q->elevator; diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c index baedac522945..0f64ee7d8d27 100644 --- a/drivers/block/ll_rw_blk.c +++ b/drivers/block/ll_rw_blk.c @@ -1652,13 +1652,13 @@ static int blk_init_free_list(request_queue_t *q) static int __make_request(request_queue_t *, struct bio *); -request_queue_t *blk_alloc_queue(int gfp_mask) +request_queue_t *blk_alloc_queue(gfp_t gfp_mask) { return blk_alloc_queue_node(gfp_mask, -1); } EXPORT_SYMBOL(blk_alloc_queue); -request_queue_t *blk_alloc_queue_node(int gfp_mask, int node_id) +request_queue_t *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) { request_queue_t *q; @@ -1787,7 +1787,7 @@ static inline void blk_free_request(request_queue_t *q, struct request *rq) } static inline struct request * -blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask) +blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, gfp_t gfp_mask) { struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask); @@ -1885,7 +1885,7 @@ static void freed_request(request_queue_t *q, int rw) * Returns !NULL on success, with queue_lock *not held*. */ static struct request *get_request(request_queue_t *q, int rw, struct bio *bio, - int gfp_mask) + gfp_t gfp_mask) { struct request *rq = NULL; struct request_list *rl = &q->rq; @@ -2019,7 +2019,7 @@ static struct request *get_request_wait(request_queue_t *q, int rw, return rq; } -struct request *blk_get_request(request_queue_t *q, int rw, int gfp_mask) +struct request *blk_get_request(request_queue_t *q, int rw, gfp_t gfp_mask) { struct request *rq; @@ -2251,7 +2251,7 @@ EXPORT_SYMBOL(blk_rq_unmap_user); * @gfp_mask: memory allocation flags */ int blk_rq_map_kern(request_queue_t *q, struct request *rq, void *kbuf, - unsigned int len, unsigned int gfp_mask) + unsigned int len, gfp_t gfp_mask) { struct bio *bio; @@ -3393,7 +3393,7 @@ void exit_io_context(void) * but since the current task itself holds a reference, the context can be * used in general code, so long as it stays within `current` context. */ -struct io_context *current_io_context(int gfp_flags) +struct io_context *current_io_context(gfp_t gfp_flags) { struct task_struct *tsk = current; struct io_context *ret; @@ -3424,7 +3424,7 @@ EXPORT_SYMBOL(current_io_context); * * This is always called in the context of the task which submitted the I/O. */ -struct io_context *get_io_context(int gfp_flags) +struct io_context *get_io_context(gfp_t gfp_flags) { struct io_context *ret; ret = current_io_context(gfp_flags); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index efdc9b5bc05c..1afbdb2d752c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -96,8 +96,8 @@ struct io_context { void put_io_context(struct io_context *ioc); void exit_io_context(void); -struct io_context *current_io_context(int gfp_flags); -struct io_context *get_io_context(int gfp_flags); +struct io_context *current_io_context(gfp_t gfp_flags); +struct io_context *get_io_context(gfp_t gfp_flags); void copy_io_context(struct io_context **pdst, struct io_context **psrc); void swap_io_context(struct io_context **ioc1, struct io_context **ioc2); @@ -354,7 +354,7 @@ struct request_queue * queue needs bounce pages for pages above this limit */ unsigned long bounce_pfn; - unsigned int bounce_gfp; + gfp_t bounce_gfp; /* * various queue flags, see QUEUE_* below @@ -550,7 +550,7 @@ extern void generic_make_request(struct bio *bio); extern void blk_put_request(struct request *); extern void blk_end_sync_rq(struct request *rq); extern void blk_attempt_remerge(request_queue_t *, struct request *); -extern struct request *blk_get_request(request_queue_t *, int, int); +extern struct request *blk_get_request(request_queue_t *, int, gfp_t); extern void blk_insert_request(request_queue_t *, struct request *, int, void *); extern void blk_requeue_request(request_queue_t *, struct request *); extern void blk_plug_device(request_queue_t *); @@ -565,7 +565,7 @@ extern void blk_run_queue(request_queue_t *); extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *); extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned int); extern int blk_rq_unmap_user(struct bio *, unsigned int); -extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, unsigned int); +extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t); extern int blk_rq_map_user_iov(request_queue_t *, struct request *, struct sg_iovec *, int); extern int blk_execute_rq(request_queue_t *, struct gendisk *, struct request *, int); @@ -654,8 +654,8 @@ extern void blk_wait_queue_drained(request_queue_t *, int); extern void blk_finish_queue_drain(request_queue_t *); int blk_get_queue(request_queue_t *); -request_queue_t *blk_alloc_queue(int gfp_mask); -request_queue_t *blk_alloc_queue_node(int,int); +request_queue_t *blk_alloc_queue(gfp_t); +request_queue_t *blk_alloc_queue_node(gfp_t, int); #define blk_put_queue(q) blk_cleanup_queue((q)) /* diff --git a/include/linux/elevator.h b/include/linux/elevator.h index ea6bbc2d7407..ed93125c1db5 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -18,7 +18,7 @@ typedef struct request *(elevator_request_list_fn) (request_queue_t *, struct re typedef void (elevator_completed_req_fn) (request_queue_t *, struct request *); typedef int (elevator_may_queue_fn) (request_queue_t *, int, struct bio *); -typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, int); +typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, gfp_t); typedef void (elevator_put_req_fn) (request_queue_t *, struct request *); typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *); @@ -98,7 +98,7 @@ extern int elv_register_queue(request_queue_t *q); extern void elv_unregister_queue(request_queue_t *q); extern int elv_may_queue(request_queue_t *, int, struct bio *); extern void elv_completed_request(request_queue_t *, struct request *); -extern int elv_set_request(request_queue_t *, struct request *, struct bio *, int); +extern int elv_set_request(request_queue_t *, struct request *, struct bio *, gfp_t); extern void elv_put_request(request_queue_t *, struct request *); /* -- GitLab From f9e3214a7964f523e12b4f30b6bd6396794818bd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:20:58 -0400 Subject: [PATCH 0513/1519] [PATCH] gfp_t: dma-mapping (arm) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/arm/mm/consistent.c | 8 ++++---- include/asm-arm/dma-mapping.h | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 26356ce4da54..82f4d5e27c54 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -75,7 +75,7 @@ static struct vm_region consistent_head = { }; static struct vm_region * -vm_region_alloc(struct vm_region *head, size_t size, int gfp) +vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) { unsigned long addr = head->vm_start, end = head->vm_end - size; unsigned long flags; @@ -133,7 +133,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad #endif static void * -__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp, +__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot) { struct page *page; @@ -251,7 +251,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp, * virtual and bus address for that space. */ void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp) +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { return __dma_alloc(dev, size, handle, gfp, pgprot_noncached(pgprot_kernel)); @@ -263,7 +263,7 @@ EXPORT_SYMBOL(dma_alloc_coherent); * dma_alloc_coherent above. */ void * -dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp) +dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { return __dma_alloc(dev, size, handle, gfp, pgprot_writecombine(pgprot_kernel)); diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h index d62ade4e4cbb..e3e8541ee63b 100644 --- a/include/asm-arm/dma-mapping.h +++ b/include/asm-arm/dma-mapping.h @@ -70,7 +70,7 @@ static inline int dma_mapping_error(dma_addr_t dma_addr) * device-viewed address. */ extern void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp); +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); /** * dma_free_coherent - free memory allocated by dma_alloc_coherent @@ -117,7 +117,7 @@ int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma, * device-viewed address. */ extern void * -dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp); +dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp); #define dma_free_writecombine(dev,size,cpu_addr,handle) \ dma_free_coherent(dev,size,cpu_addr,handle) -- GitLab From 06a544971fad0992fe8b92c5647538d573089dd4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:03 -0400 Subject: [PATCH 0514/1519] [PATCH] gfp_t: dma-mapping (ia64) ... and related annotations for amd64 - swiotlb code is shared, but prototypes are not. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/ia64/hp/common/hwsw_iommu.c | 2 +- arch/ia64/hp/common/sba_iommu.c | 2 +- arch/ia64/lib/swiotlb.c | 2 +- arch/ia64/sn/pci/pci_dma.c | 2 +- include/asm-ia64/machvec.h | 2 +- include/asm-x86_64/swiotlb.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 80f8ef013939..1ba02baf2f94 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -71,7 +71,7 @@ hwsw_init (void) } void * -hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags) +hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) { if (use_swiotlb(dev)) return swiotlb_alloc_coherent(dev, size, dma_handle, flags); diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 11957598a8b9..21bffba78b6d 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -1076,7 +1076,7 @@ void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir) * See Documentation/DMA-mapping.txt */ void * -sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags) +sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) { struct ioc *ioc; void *addr; diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c index a604efc7f6c9..3ebbb3c8ba36 100644 --- a/arch/ia64/lib/swiotlb.c +++ b/arch/ia64/lib/swiotlb.c @@ -314,7 +314,7 @@ sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir) void * swiotlb_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, int flags) + dma_addr_t *dma_handle, gfp_t flags) { unsigned long dev_addr; void *ret; diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 0e4b9ad9ef02..75e6e874bebf 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL(sn_dma_set_mask); * more information. */ void *sn_dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int flags) + dma_addr_t * dma_handle, gfp_t flags) { void *cpuaddr; unsigned long phys_addr; diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h index 79e89a7db566..a2f6ac5aef7d 100644 --- a/include/asm-ia64/machvec.h +++ b/include/asm-ia64/machvec.h @@ -37,7 +37,7 @@ typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val, /* DMA-mapping interface: */ typedef void ia64_mv_dma_init (void); -typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, int); +typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, gfp_t); typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t); typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int); typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int); diff --git a/include/asm-x86_64/swiotlb.h b/include/asm-x86_64/swiotlb.h index 36293061f4ed..7cbfd10ecc3c 100644 --- a/include/asm-x86_64/swiotlb.h +++ b/include/asm-x86_64/swiotlb.h @@ -27,7 +27,7 @@ extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents, int direction); extern int swiotlb_dma_mapping_error(dma_addr_t dma_addr); extern void *swiotlb_alloc_coherent (struct device *hwdev, size_t size, - dma_addr_t *dma_handle, int flags); + dma_addr_t *dma_handle, gfp_t flags); extern void swiotlb_free_coherent (struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle); -- GitLab From 55c5d74b3ac3a6b8bdde4e5fab4015eccd557d52 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:08 -0400 Subject: [PATCH 0515/1519] [PATCH] gfp_t: dma-mapping (alpha) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/pci-noop.c | 2 +- include/asm-alpha/dma-mapping.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c index 582a3519fb28..9903e3a79102 100644 --- a/arch/alpha/kernel/pci-noop.c +++ b/arch/alpha/kernel/pci-noop.c @@ -154,7 +154,7 @@ pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask) void * dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h index c675f282d6ad..680f7ecbb28f 100644 --- a/include/asm-alpha/dma-mapping.h +++ b/include/asm-alpha/dma-mapping.h @@ -31,7 +31,7 @@ #else /* no PCI - no IOMMU. */ void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int gfp); + dma_addr_t *dma_handle, gfp_t gfp); int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction); -- GitLab From 43b7eae1f5c5424a49ea4a65e9b0e9d5d2fd9446 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:13 -0400 Subject: [PATCH 0516/1519] [PATCH] gfp_t: dma-mapping (cris) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/asm-cris/dma-mapping.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-cris/dma-mapping.h b/include/asm-cris/dma-mapping.h index 0b5c3fdaefe1..8eff51349ae7 100644 --- a/include/asm-cris/dma-mapping.h +++ b/include/asm-cris/dma-mapping.h @@ -15,14 +15,14 @@ #ifdef CONFIG_PCI void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag); + dma_addr_t *dma_handle, gfp_t flag); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); #else static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - int flag) + gfp_t flag) { BUG(); return NULL; -- GitLab From a5da7d3c6e8fcd7aaab6c4e1e9101ba333248ffb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:18 -0400 Subject: [PATCH 0517/1519] [PATCH] gfp_t: dma-mapping (frv) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/frv/mb93090-mb00/pci-dma-nommu.c | 2 +- arch/frv/mb93090-mb00/pci-dma.c | 2 +- arch/frv/mm/dma-alloc.c | 2 +- include/asm-frv/dma-mapping.h | 2 +- include/asm-frv/pci.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c index 819895cf0b9e..2082a9647f4f 100644 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -33,7 +33,7 @@ struct dma_alloc_record { static DEFINE_SPINLOCK(dma_alloc_lock); static LIST_HEAD(dma_alloc_list); -void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp) +void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) { struct dma_alloc_record *new; struct list_head *this = &dma_alloc_list; diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c index 27eb12066507..86fbdadc51b6 100644 --- a/arch/frv/mb93090-mb00/pci-dma.c +++ b/arch/frv/mb93090-mb00/pci-dma.c @@ -17,7 +17,7 @@ #include #include -void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp) +void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) { void *ret; diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c index 4b38d45435f6..cfc4f97490c6 100644 --- a/arch/frv/mm/dma-alloc.c +++ b/arch/frv/mm/dma-alloc.c @@ -81,7 +81,7 @@ static int map_page(unsigned long va, unsigned long pa, pgprot_t prot) * portions of the kernel with single large page TLB entries, and * still get unique uncached pages for consistent DMA. */ -void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) +void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle) { struct vm_struct *area; unsigned long page, va, pa; diff --git a/include/asm-frv/dma-mapping.h b/include/asm-frv/dma-mapping.h index 0206ab35eae0..5003e017fd1e 100644 --- a/include/asm-frv/dma-mapping.h +++ b/include/asm-frv/dma-mapping.h @@ -13,7 +13,7 @@ extern unsigned long __nongprelbss dma_coherent_mem_start; extern unsigned long __nongprelbss dma_coherent_mem_end; -void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, int gfp); +void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); /* diff --git a/include/asm-frv/pci.h b/include/asm-frv/pci.h index b4efe5e3591a..1168451c275f 100644 --- a/include/asm-frv/pci.h +++ b/include/asm-frv/pci.h @@ -32,7 +32,7 @@ extern void pcibios_set_master(struct pci_dev *dev); extern void pcibios_penalize_isa_irq(int irq); #ifdef CONFIG_MMU -extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle); +extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle); extern void consistent_free(void *vaddr); extern void consistent_sync(void *vaddr, size_t size, int direction); extern void consistent_sync_page(struct page *page, unsigned long offset, -- GitLab From 185a8ff52875d8db31b9346ab186f75baa616dee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:23 -0400 Subject: [PATCH 0518/1519] [PATCH] gfp_t: dma-mapping (mips) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/mips/mm/dma-coherent.c | 4 ++-- arch/mips/mm/dma-ip27.c | 4 ++-- arch/mips/mm/dma-ip32.c | 4 ++-- arch/mips/mm/dma-noncoherent.c | 4 ++-- include/asm-mips/dma-mapping.h | 4 ++-- 5 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c index 97a50d38c98f..a617f8c327e8 100644 --- a/arch/mips/mm/dma-coherent.c +++ b/arch/mips/mm/dma-coherent.c @@ -18,7 +18,7 @@ #include void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; /* ignore region specifiers */ @@ -39,7 +39,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, EXPORT_SYMBOL(dma_alloc_noncoherent); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) __attribute__((alias("dma_alloc_noncoherent"))); EXPORT_SYMBOL(dma_alloc_coherent); diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c index aa7c94b5d781..8da19fd22ac6 100644 --- a/arch/mips/mm/dma-ip27.c +++ b/arch/mips/mm/dma-ip27.c @@ -22,7 +22,7 @@ pdev_to_baddr(to_pci_dev(dev), (addr)) void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; @@ -44,7 +44,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, EXPORT_SYMBOL(dma_alloc_noncoherent); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) __attribute__((alias("dma_alloc_noncoherent"))); EXPORT_SYMBOL(dma_alloc_coherent); diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c index 2cbe196c35fb..a7e3072ff78d 100644 --- a/arch/mips/mm/dma-ip32.c +++ b/arch/mips/mm/dma-ip32.c @@ -37,7 +37,7 @@ #define RAM_OFFSET_MASK 0x3fffffff void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; /* ignore region specifiers */ @@ -61,7 +61,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, EXPORT_SYMBOL(dma_alloc_noncoherent); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c index 59e54f12212e..4ce02028a292 100644 --- a/arch/mips/mm/dma-noncoherent.c +++ b/arch/mips/mm/dma-noncoherent.c @@ -24,7 +24,7 @@ */ void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; /* ignore region specifiers */ @@ -45,7 +45,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, EXPORT_SYMBOL(dma_alloc_noncoherent); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, int gfp) + dma_addr_t * dma_handle, gfp_t gfp) { void *ret; diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h index af28dc88930b..43288634c38a 100644 --- a/include/asm-mips/dma-mapping.h +++ b/include/asm-mips/dma-mapping.h @@ -5,13 +5,13 @@ #include void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag); + dma_addr_t *dma_handle, gfp_t flag); void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag); + dma_addr_t *dma_handle, gfp_t flag); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); -- GitLab From 5c1fb41f40b7b6d819a617f52dbd66b6938ef362 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:28 -0400 Subject: [PATCH 0519/1519] [PATCH] gfp_t: dma-mapping (parisc) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/parisc/kernel/pci-dma.c | 6 +++--- drivers/parisc/ccio-dma.c | 2 +- drivers/parisc/sba_iommu.c | 2 +- include/asm-parisc/dma-mapping.h | 8 ++++---- 4 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 368cc095c99f..844c2877a2e3 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -349,7 +349,7 @@ pcxl_dma_init(void) __initcall(pcxl_dma_init); -static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag) +static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { unsigned long vaddr; unsigned long paddr; @@ -502,13 +502,13 @@ struct hppa_dma_ops pcxl_dma_ops = { }; static void *fail_alloc_consistent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { return NULL; } static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { void *addr = NULL; diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index 0e98a9d9834c..a3bd91a61827 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -836,7 +836,7 @@ ccio_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * This function implements the pci_alloc_consistent function. */ static void * -ccio_alloc_consistent(struct device *dev, size_t size, dma_addr_t *dma_handle, int flag) +ccio_alloc_consistent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { void *ret; #if 0 diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 82ea68b55df4..bd8b3e5a5cd7 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -986,7 +986,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * See Documentation/DMA-mapping.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, int gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; diff --git a/include/asm-parisc/dma-mapping.h b/include/asm-parisc/dma-mapping.h index 4db84f969e9e..74d4ac6f2151 100644 --- a/include/asm-parisc/dma-mapping.h +++ b/include/asm-parisc/dma-mapping.h @@ -9,8 +9,8 @@ /* See Documentation/DMA-mapping.txt */ struct hppa_dma_ops { int (*dma_supported)(struct device *dev, u64 mask); - void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, int flag); - void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, int flag); + void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); + void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); void (*free_consistent)(struct device *dev, size_t size, void *vaddr, dma_addr_t iova); dma_addr_t (*map_single)(struct device *dev, void *addr, size_t size, enum dma_data_direction direction); void (*unmap_single)(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction direction); @@ -49,14 +49,14 @@ extern struct hppa_dma_ops *hppa_dma_ops; static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - int flag) + gfp_t flag) { return hppa_dma_ops->alloc_consistent(dev, size, dma_handle, flag); } static inline void * dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - int flag) + gfp_t flag) { return hppa_dma_ops->alloc_noncoherent(dev, size, dma_handle, flag); } -- GitLab From e82dd4d6472304495afa271b2f63b572868b23d9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:33 -0400 Subject: [PATCH 0520/1519] [PATCH] gfp_t: dma-mapping (ppc) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/ppc/kernel/dma-mapping.c | 4 ++-- include/asm-ppc/dma-mapping.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c index 8edee806dae7..0f710d2baec6 100644 --- a/arch/ppc/kernel/dma-mapping.c +++ b/arch/ppc/kernel/dma-mapping.c @@ -115,7 +115,7 @@ static struct vm_region consistent_head = { }; static struct vm_region * -vm_region_alloc(struct vm_region *head, size_t size, int gfp) +vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp) { unsigned long addr = head->vm_start, end = head->vm_end - size; unsigned long flags; @@ -173,7 +173,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad * virtual and bus address for that space. */ void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp) +__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) { struct page *page; struct vm_region *c; diff --git a/include/asm-ppc/dma-mapping.h b/include/asm-ppc/dma-mapping.h index 061bfcac1bf1..6e9635114433 100644 --- a/include/asm-ppc/dma-mapping.h +++ b/include/asm-ppc/dma-mapping.h @@ -19,7 +19,7 @@ * allocate the space "normally" and use the cache management functions * to ensure it is consistent. */ -extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp); +extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); extern void __dma_free_coherent(size_t size, void *vaddr); extern void __dma_sync(void *vaddr, size_t size, int direction); extern void __dma_sync_page(struct page *page, unsigned long offset, -- GitLab From 6dae2c2306684d9e76a04c22dc090380a9009f12 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:38 -0400 Subject: [PATCH 0521/1519] [PATCH] gfp_t: dma-mapping (sh) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/sh/boards/renesas/rts7751r2d/mach.c | 2 +- arch/sh/cchips/voyagergx/consistent.c | 2 +- arch/sh/drivers/pci/dma-dreamcast.c | 2 +- arch/sh/mm/consistent.c | 2 +- include/asm-sh/dma-mapping.h | 4 ++-- include/asm-sh/machvec.h | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c index 1efc18e786d5..610740512d56 100644 --- a/arch/sh/boards/renesas/rts7751r2d/mach.c +++ b/arch/sh/boards/renesas/rts7751r2d/mach.c @@ -23,7 +23,7 @@ extern void init_rts7751r2d_IRQ(void); extern void *rts7751r2d_ioremap(unsigned long, unsigned long); extern int rts7751r2d_irq_demux(int irq); -extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, int); +extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); /* diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c index 5b92585a38d2..3d9a02c093a3 100644 --- a/arch/sh/cchips/voyagergx/consistent.c +++ b/arch/sh/cchips/voyagergx/consistent.c @@ -31,7 +31,7 @@ static LIST_HEAD(voya_alloc_list); #define OHCI_SRAM_SIZE 0x10000 void *voyagergx_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *handle, int flag) + dma_addr_t *handle, gfp_t flag) { struct list_head *list = &voya_alloc_list; struct voya_alloc_entry *entry; diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c index 83de7ef4e7df..e12418bb1fa5 100644 --- a/arch/sh/drivers/pci/dma-dreamcast.c +++ b/arch/sh/drivers/pci/dma-dreamcast.c @@ -33,7 +33,7 @@ static int gapspci_dma_used = 0; void *dreamcast_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { unsigned long buf; diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 1f7af0c73cf4..df3a9e452cc5 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -11,7 +11,7 @@ #include #include -void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle) +void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) { struct page *page, *end, *free; void *ret; diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h index 80d164c1529e..d3fa5c2b889d 100644 --- a/include/asm-sh/dma-mapping.h +++ b/include/asm-sh/dma-mapping.h @@ -9,7 +9,7 @@ extern struct bus_type pci_bus_type; /* arch/sh/mm/consistent.c */ -extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle); +extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle); extern void consistent_free(void *vaddr, size_t size); extern void consistent_sync(void *vaddr, size_t size, int direction); @@ -26,7 +26,7 @@ static inline int dma_set_mask(struct device *dev, u64 mask) } static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { if (sh_mv.mv_consistent_alloc) { void *ret; diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h index 5771f4baa478..3f18aa180516 100644 --- a/include/asm-sh/machvec.h +++ b/include/asm-sh/machvec.h @@ -64,7 +64,7 @@ struct sh_machine_vector void (*mv_heartbeat)(void); - void *(*mv_consistent_alloc)(struct device *, size_t, dma_addr_t *, int); + void *(*mv_consistent_alloc)(struct device *, size_t, dma_addr_t *, gfp_t); int (*mv_consistent_free)(struct device *, size_t, void *, dma_addr_t); }; -- GitLab From f80aabb03a33702d934fbc3c02fd96471816d82e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:43 -0400 Subject: [PATCH 0522/1519] [PATCH] gfp_t: dma-mapping (amd64) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/pci-gart.c | 4 ++-- arch/x86_64/kernel/pci-nommu.c | 2 +- include/asm-x86_64/dma-mapping.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index cf0a0315d586..88be97c96987 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -187,7 +187,7 @@ static void flush_gart(struct device *dev) /* Allocate DMA memory on node near device */ noinline -static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order) +static void *dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { struct page *page; int node; @@ -204,7 +204,7 @@ static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order) */ void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - unsigned gfp) + gfp_t gfp) { void *memory; unsigned long dma_mask = 0; diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c index 67d90b89af0b..5a981dca87ff 100644 --- a/arch/x86_64/kernel/pci-nommu.c +++ b/arch/x86_64/kernel/pci-nommu.c @@ -24,7 +24,7 @@ EXPORT_SYMBOL(iommu_sac_force); */ void *dma_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, unsigned gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; u64 mask; diff --git a/include/asm-x86_64/dma-mapping.h b/include/asm-x86_64/dma-mapping.h index e784fdc524f1..54a380efed41 100644 --- a/include/asm-x86_64/dma-mapping.h +++ b/include/asm-x86_64/dma-mapping.h @@ -17,7 +17,7 @@ extern dma_addr_t bad_dma_address; (swiotlb ? swiotlb_dma_mapping_error(x) : ((x) == bad_dma_address)) void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - unsigned gfp); + gfp_t gfp); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); -- GitLab From 5fb5cbed6e5ba4cbaf7284a23d42eb878bb7da24 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:48 -0400 Subject: [PATCH 0523/1519] [PATCH] gfp_t: dma-mapping (xtensa) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/xtensa/kernel/pci-dma.c | 2 +- include/asm-xtensa/dma-mapping.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c index 84fde258cf85..1ff82268e8ea 100644 --- a/arch/xtensa/kernel/pci-dma.c +++ b/arch/xtensa/kernel/pci-dma.c @@ -29,7 +29,7 @@ */ void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp) +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { void *ret; diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h index e86a206f1209..c425f10d086a 100644 --- a/include/asm-xtensa/dma-mapping.h +++ b/include/asm-xtensa/dma-mapping.h @@ -28,7 +28,7 @@ extern void consistent_sync(void*, size_t, int); #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag); + dma_addr_t *dma_handle, gfp_t flag); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); -- GitLab From 970a9e73f9036ef89d46b8240f99463f6d244c1d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:53 -0400 Subject: [PATCH 0524/1519] [PATCH] gfp_t: dma-mapping (simple cases) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/asm-generic/dma-mapping-broken.h | 2 +- include/asm-m32r/dma-mapping.h | 2 +- include/asm-sh64/dma-mapping.h | 2 +- include/asm-sparc/dma-mapping.h | 2 +- include/asm-sparc64/dma-mapping.h | 2 +- include/asm-um/dma-mapping.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h index fd9de9502dff..a7f1a55ce6b0 100644 --- a/include/asm-generic/dma-mapping-broken.h +++ b/include/asm-generic/dma-mapping-broken.h @@ -6,7 +6,7 @@ static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - int flag) + gfp_t flag) { BUG(); return NULL; diff --git a/include/asm-m32r/dma-mapping.h b/include/asm-m32r/dma-mapping.h index 3a2db28834b6..a7fa0302bda7 100644 --- a/include/asm-m32r/dma-mapping.h +++ b/include/asm-m32r/dma-mapping.h @@ -8,7 +8,7 @@ static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - int flag) + gfp_t flag) { return (void *)NULL; } diff --git a/include/asm-sh64/dma-mapping.h b/include/asm-sh64/dma-mapping.h index b8d26fe677f4..cc9a2e86f5b4 100644 --- a/include/asm-sh64/dma-mapping.h +++ b/include/asm-sh64/dma-mapping.h @@ -25,7 +25,7 @@ static inline int dma_set_mask(struct device *dev, u64 mask) } static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { return consistent_alloc(NULL, size, dma_handle); } diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h index 2dc5bb8effa6..d7c3b0f0a901 100644 --- a/include/asm-sparc/dma-mapping.h +++ b/include/asm-sparc/dma-mapping.h @@ -8,7 +8,7 @@ #else static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { BUG(); return NULL; diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h index 1c5da41653a4..c7d5804ba76d 100644 --- a/include/asm-sparc64/dma-mapping.h +++ b/include/asm-sparc64/dma-mapping.h @@ -10,7 +10,7 @@ struct device; static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, int flag) + dma_addr_t *dma_handle, gfp_t flag) { BUG(); return NULL; diff --git a/include/asm-um/dma-mapping.h b/include/asm-um/dma-mapping.h index 13e6291f7151..babd29895114 100644 --- a/include/asm-um/dma-mapping.h +++ b/include/asm-um/dma-mapping.h @@ -19,7 +19,7 @@ dma_set_mask(struct device *dev, u64 dma_mask) static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - int flag) + gfp_t flag) { BUG(); return((void *) 0); -- GitLab From 55016f10e31bb15b85d8c500f979dfdceb37d548 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:21:58 -0400 Subject: [PATCH 0525/1519] [PATCH] gfp_t: drivers/usb Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/core/buffer.c | 2 +- drivers/usb/core/hcd.c | 2 +- drivers/usb/core/hcd.h | 8 ++++---- drivers/usb/core/message.c | 2 +- drivers/usb/core/urb.c | 4 ++-- drivers/usb/core/usb.c | 2 +- drivers/usb/gadget/dummy_hcd.c | 8 ++++---- drivers/usb/gadget/ether.c | 22 +++++++++++----------- drivers/usb/gadget/goku_udc.c | 6 +++--- drivers/usb/gadget/lh7a40x_udc.c | 12 ++++++------ drivers/usb/gadget/net2280.c | 6 +++--- drivers/usb/gadget/omap_udc.c | 6 +++--- drivers/usb/gadget/pxa2xx_udc.c | 6 +++--- drivers/usb/gadget/serial.c | 16 ++++++++-------- drivers/usb/gadget/zero.c | 8 ++++---- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/ehci-mem.c | 6 +++--- drivers/usb/host/ehci-q.c | 6 +++--- drivers/usb/host/ehci-sched.c | 14 +++++++------- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-mem.c | 4 ++-- drivers/usb/host/sl811-hcd.c | 2 +- drivers/usb/host/uhci-q.c | 2 +- drivers/usb/misc/uss720.c | 6 +++--- drivers/usb/net/asix.c | 2 +- drivers/usb/net/gl620a.c | 2 +- drivers/usb/net/kaweth.c | 6 +++--- drivers/usb/net/net1080.c | 2 +- drivers/usb/net/rndis_host.c | 2 +- drivers/usb/net/usbnet.c | 2 +- drivers/usb/net/usbnet.h | 2 +- drivers/usb/net/zaurus.c | 2 +- drivers/usb/net/zd1201.c | 2 +- include/linux/usb.h | 8 ++++---- include/linux/usb_gadget.h | 12 ++++++------ sound/usb/usbmidi.c | 2 +- 37 files changed, 100 insertions(+), 100 deletions(-) diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index fc15b4acc8af..57e800ac3cee 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -106,7 +106,7 @@ void hcd_buffer_destroy (struct usb_hcd *hcd) void *hcd_buffer_alloc ( struct usb_bus *bus, size_t size, - unsigned mem_flags, + gfp_t mem_flags, dma_addr_t *dma ) { diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1017a97a418b..ff19d64041b5 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1112,7 +1112,7 @@ static void urb_unlink (struct urb *urb) * expects usb_submit_urb() to have sanity checked and conditioned all * inputs in the urb */ -static int hcd_submit_urb (struct urb *urb, unsigned mem_flags) +static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags) { int status; struct usb_hcd *hcd = urb->dev->bus->hcpriv; diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index ac451fa7e4d2..1f1ed6211af8 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -142,12 +142,12 @@ struct hcd_timeout { /* timeouts we allocate */ struct usb_operations { int (*get_frame_number) (struct usb_device *usb_dev); - int (*submit_urb) (struct urb *urb, unsigned mem_flags); + int (*submit_urb) (struct urb *urb, gfp_t mem_flags); int (*unlink_urb) (struct urb *urb, int status); /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */ void *(*buffer_alloc)(struct usb_bus *bus, size_t size, - unsigned mem_flags, + gfp_t mem_flags, dma_addr_t *dma); void (*buffer_free)(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); @@ -200,7 +200,7 @@ struct hc_driver { int (*urb_enqueue) (struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - unsigned mem_flags); + gfp_t mem_flags); int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb); /* hw synch, freeing endpoint resources that urb_dequeue can't */ @@ -247,7 +247,7 @@ int hcd_buffer_create (struct usb_hcd *hcd); void hcd_buffer_destroy (struct usb_hcd *hcd); void *hcd_buffer_alloc (struct usb_bus *bus, size_t size, - unsigned mem_flags, dma_addr_t *dma); + gfp_t mem_flags, dma_addr_t *dma); void hcd_buffer_free (struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index f1fb67fe22a8..f9a81e84dbdf 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -321,7 +321,7 @@ int usb_sg_init ( struct scatterlist *sg, int nents, size_t length, - unsigned mem_flags + gfp_t mem_flags ) { int i; diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index c846fefb7386..b32898e0a27d 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -60,7 +60,7 @@ void usb_init_urb(struct urb *urb) * * The driver must call usb_free_urb() when it is finished with the urb. */ -struct urb *usb_alloc_urb(int iso_packets, unsigned mem_flags) +struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags) { struct urb *urb; @@ -224,7 +224,7 @@ struct urb * usb_get_urb(struct urb *urb) * GFP_NOIO, unless b) or c) apply * */ -int usb_submit_urb(struct urb *urb, unsigned mem_flags) +int usb_submit_urb(struct urb *urb, gfp_t mem_flags) { int pipe, temp, max; struct usb_device *dev; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 7d131509e419..4c57f3f649ed 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1147,7 +1147,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, void *usb_buffer_alloc ( struct usb_device *dev, size_t size, - unsigned mem_flags, + gfp_t mem_flags, dma_addr_t *dma ) { diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 583db7c38cf1..8d9d8ee89554 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -470,7 +470,7 @@ static int dummy_disable (struct usb_ep *_ep) } static struct usb_request * -dummy_alloc_request (struct usb_ep *_ep, unsigned mem_flags) +dummy_alloc_request (struct usb_ep *_ep, gfp_t mem_flags) { struct dummy_ep *ep; struct dummy_request *req; @@ -507,7 +507,7 @@ dummy_alloc_buffer ( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - unsigned mem_flags + gfp_t mem_flags ) { char *retval; struct dummy_ep *ep; @@ -541,7 +541,7 @@ fifo_complete (struct usb_ep *ep, struct usb_request *req) static int dummy_queue (struct usb_ep *_ep, struct usb_request *_req, - unsigned mem_flags) + gfp_t mem_flags) { struct dummy_ep *ep; struct dummy_request *req; @@ -999,7 +999,7 @@ static int dummy_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct dummy *dum; struct urbp *urbp; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 49459e33e952..f1024e804d5c 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -945,11 +945,11 @@ config_buf (enum usb_device_speed speed, /*-------------------------------------------------------------------------*/ -static void eth_start (struct eth_dev *dev, unsigned gfp_flags); -static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags); +static void eth_start (struct eth_dev *dev, gfp_t gfp_flags); +static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags); static int -set_ether_config (struct eth_dev *dev, unsigned gfp_flags) +set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; @@ -1081,7 +1081,7 @@ static void eth_reset_config (struct eth_dev *dev) * that returns config descriptors, and altsetting code. */ static int -eth_set_config (struct eth_dev *dev, unsigned number, unsigned gfp_flags) +eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; @@ -1598,7 +1598,7 @@ static void defer_kevent (struct eth_dev *dev, int flag) static void rx_complete (struct usb_ep *ep, struct usb_request *req); static int -rx_submit (struct eth_dev *dev, struct usb_request *req, unsigned gfp_flags) +rx_submit (struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) { struct sk_buff *skb; int retval = -ENOMEM; @@ -1724,7 +1724,7 @@ static void rx_complete (struct usb_ep *ep, struct usb_request *req) } static int prealloc (struct list_head *list, struct usb_ep *ep, - unsigned n, unsigned gfp_flags) + unsigned n, gfp_t gfp_flags) { unsigned i; struct usb_request *req; @@ -1763,7 +1763,7 @@ static int prealloc (struct list_head *list, struct usb_ep *ep, return 0; } -static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags) +static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags) { int status; @@ -1779,7 +1779,7 @@ static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags) return status; } -static void rx_fill (struct eth_dev *dev, unsigned gfp_flags) +static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; unsigned long flags; @@ -1962,7 +1962,7 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) * normally just one notification will be queued. */ -static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, unsigned); +static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, gfp_t); static void eth_req_free (struct usb_ep *ep, struct usb_request *req); static void @@ -2024,7 +2024,7 @@ static int rndis_control_ack (struct net_device *net) #endif /* RNDIS */ -static void eth_start (struct eth_dev *dev, unsigned gfp_flags) +static void eth_start (struct eth_dev *dev, gfp_t gfp_flags) { DEBUG (dev, "%s\n", __FUNCTION__); @@ -2092,7 +2092,7 @@ static int eth_stop (struct net_device *net) /*-------------------------------------------------------------------------*/ static struct usb_request * -eth_req_alloc (struct usb_ep *ep, unsigned size, unsigned gfp_flags) +eth_req_alloc (struct usb_ep *ep, unsigned size, gfp_t gfp_flags) { struct usb_request *req; diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index eaab26f4ed37..b0f3cd63e3b9 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -269,7 +269,7 @@ static int goku_ep_disable(struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -goku_alloc_request(struct usb_ep *_ep, unsigned gfp_flags) +goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) { struct goku_request *req; @@ -327,7 +327,7 @@ goku_free_request(struct usb_ep *_ep, struct usb_request *_req) */ static void * goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes, - dma_addr_t *dma, unsigned gfp_flags) + dma_addr_t *dma, gfp_t gfp_flags) { void *retval; struct goku_ep *ep; @@ -789,7 +789,7 @@ static void abort_dma(struct goku_ep *ep, int status) /*-------------------------------------------------------------------------*/ static int -goku_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) +goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct goku_request *req; struct goku_ep *ep; diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 4842577789c9..012d1e5f1524 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -71,13 +71,13 @@ static char *state_names[] = { static int lh7a40x_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *); static int lh7a40x_ep_disable(struct usb_ep *ep); -static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, int); +static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, gfp_t); static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *); static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned, dma_addr_t *, - int); + gfp_t); static void lh7a40x_free_buffer(struct usb_ep *ep, void *, dma_addr_t, unsigned); -static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, int); +static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t); static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *); static int lh7a40x_set_halt(struct usb_ep *ep, int); static int lh7a40x_fifo_status(struct usb_ep *ep); @@ -1106,7 +1106,7 @@ static int lh7a40x_ep_disable(struct usb_ep *_ep) } static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, - unsigned gfp_flags) + gfp_t gfp_flags) { struct lh7a40x_request *req; @@ -1134,7 +1134,7 @@ static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req) } static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes, - dma_addr_t * dma, unsigned gfp_flags) + dma_addr_t * dma, gfp_t gfp_flags) { char *retval; @@ -1158,7 +1158,7 @@ static void lh7a40x_free_buffer(struct usb_ep *ep, void *buf, dma_addr_t dma, * NOTE: Sets INDEX register */ static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req, - unsigned gfp_flags) + gfp_t gfp_flags) { struct lh7a40x_request *req; struct lh7a40x_ep *ep; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 477fab2e74d1..c32e1f7476da 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -376,7 +376,7 @@ static int net2280_disable (struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -net2280_alloc_request (struct usb_ep *_ep, unsigned gfp_flags) +net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) { struct net2280_ep *ep; struct net2280_request *req; @@ -463,7 +463,7 @@ net2280_alloc_buffer ( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - unsigned gfp_flags + gfp_t gfp_flags ) { void *retval; @@ -897,7 +897,7 @@ done (struct net2280_ep *ep, struct net2280_request *req, int status) /*-------------------------------------------------------------------------*/ static int -net2280_queue (struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) +net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct net2280_request *req; struct net2280_ep *ep; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index ff5533e69560..287c5900fb13 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -269,7 +269,7 @@ static int omap_ep_disable(struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -omap_alloc_request(struct usb_ep *ep, unsigned gfp_flags) +omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) { struct omap_req *req; @@ -298,7 +298,7 @@ omap_alloc_buffer( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - unsigned gfp_flags + gfp_t gfp_flags ) { void *retval; @@ -937,7 +937,7 @@ static void dma_channel_release(struct omap_ep *ep) /*-------------------------------------------------------------------------*/ static int -omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) +omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); struct omap_req *req = container_of(_req, struct omap_req, req); diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 73f8c9404156..6e545393cfff 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -332,7 +332,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep) * pxa2xx_ep_alloc_request - allocate a request data structure */ static struct usb_request * -pxa2xx_ep_alloc_request (struct usb_ep *_ep, unsigned gfp_flags) +pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) { struct pxa2xx_request *req; @@ -367,7 +367,7 @@ pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) */ static void * pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes, - dma_addr_t *dma, unsigned gfp_flags) + dma_addr_t *dma, gfp_t gfp_flags) { char *retval; @@ -874,7 +874,7 @@ static void dma_nodesc_handler(int dmach, void *_ep, struct pt_regs *r) /*-------------------------------------------------------------------------*/ static int -pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) +pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct pxa2xx_request *req; struct pxa2xx_ep *ep; diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index c925d9222f53..b35ac6d334f8 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -300,18 +300,18 @@ static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, u8 type, unsigned int index, int is_otg); static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, - unsigned kmalloc_flags); + gfp_t kmalloc_flags); static void gs_free_req(struct usb_ep *ep, struct usb_request *req); static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, - unsigned kmalloc_flags); + gfp_t kmalloc_flags); static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req); -static int gs_alloc_ports(struct gs_dev *dev, unsigned kmalloc_flags); +static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags); static void gs_free_ports(struct gs_dev *dev); /* circular buffer */ -static struct gs_buf *gs_buf_alloc(unsigned int size, unsigned kmalloc_flags); +static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags); static void gs_buf_free(struct gs_buf *gb); static void gs_buf_clear(struct gs_buf *gb); static unsigned int gs_buf_data_avail(struct gs_buf *gb); @@ -2091,7 +2091,7 @@ static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, * usb_request or NULL if there is an error. */ static struct usb_request * -gs_alloc_req(struct usb_ep *ep, unsigned int len, unsigned kmalloc_flags) +gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags) { struct usb_request *req; @@ -2132,7 +2132,7 @@ static void gs_free_req(struct usb_ep *ep, struct usb_request *req) * endpoint, buffer len, and kmalloc flags. */ static struct gs_req_entry * -gs_alloc_req_entry(struct usb_ep *ep, unsigned len, unsigned kmalloc_flags) +gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags) { struct gs_req_entry *req; @@ -2173,7 +2173,7 @@ static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req) * * The device lock is normally held when calling this function. */ -static int gs_alloc_ports(struct gs_dev *dev, unsigned kmalloc_flags) +static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags) { int i; struct gs_port *port; @@ -2255,7 +2255,7 @@ static void gs_free_ports(struct gs_dev *dev) * * Allocate a circular buffer and all associated memory. */ -static struct gs_buf *gs_buf_alloc(unsigned int size, unsigned kmalloc_flags) +static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags) { struct gs_buf *gb; diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 6890e773b2a2..ec9c424f1d97 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -612,7 +612,7 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) } static struct usb_request * -source_sink_start_ep (struct usb_ep *ep, unsigned gfp_flags) +source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) { struct usb_request *req; int status; @@ -640,7 +640,7 @@ source_sink_start_ep (struct usb_ep *ep, unsigned gfp_flags) } static int -set_source_sink_config (struct zero_dev *dev, unsigned gfp_flags) +set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_ep *ep; @@ -744,7 +744,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) } static int -set_loopback_config (struct zero_dev *dev, unsigned gfp_flags) +set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags) { int result = 0; struct usb_ep *ep; @@ -845,7 +845,7 @@ static void zero_reset_config (struct zero_dev *dev) * by limiting configuration choices (like the pxa2xx). */ static int -zero_set_config (struct zero_dev *dev, unsigned number, unsigned gfp_flags) +zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b948ffd94f45..f5eb9e7b5b18 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -983,7 +983,7 @@ static int ehci_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); struct list_head qtd_list; diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 5c38ad869485..91c2ab43cbcc 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -45,7 +45,7 @@ static inline void ehci_qtd_init (struct ehci_qtd *qtd, dma_addr_t dma) INIT_LIST_HEAD (&qtd->qtd_list); } -static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, int flags) +static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, gfp_t flags) { struct ehci_qtd *qtd; dma_addr_t dma; @@ -79,7 +79,7 @@ static void qh_destroy (struct kref *kref) dma_pool_free (ehci->qh_pool, qh, qh->qh_dma); } -static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, int flags) +static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, gfp_t flags) { struct ehci_qh *qh; dma_addr_t dma; @@ -161,7 +161,7 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci) } /* remember to add cleanup code (above) if you add anything here */ -static int ehci_mem_init (struct ehci_hcd *ehci, int flags) +static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) { int i; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 940d38ca7d91..5bb872c3496d 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -477,7 +477,7 @@ qh_urb_transaction ( struct ehci_hcd *ehci, struct urb *urb, struct list_head *head, - int flags + gfp_t flags ) { struct ehci_qtd *qtd, *qtd_prev; dma_addr_t buf; @@ -629,7 +629,7 @@ static struct ehci_qh * qh_make ( struct ehci_hcd *ehci, struct urb *urb, - int flags + gfp_t flags ) { struct ehci_qh *qh = ehci_qh_alloc (ehci, flags); u32 info1 = 0, info2 = 0; @@ -906,7 +906,7 @@ submit_async ( struct usb_host_endpoint *ep, struct urb *urb, struct list_head *qtd_list, - unsigned mem_flags + gfp_t mem_flags ) { struct ehci_qtd *qtd; int epnum; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index ccc7300baa6d..f0c8aa1ccd5d 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -589,7 +589,7 @@ static int intr_submit ( struct usb_host_endpoint *ep, struct urb *urb, struct list_head *qtd_list, - unsigned mem_flags + gfp_t mem_flags ) { unsigned epnum; unsigned long flags; @@ -634,7 +634,7 @@ static int intr_submit ( /* ehci_iso_stream ops work with both ITD and SITD */ static struct ehci_iso_stream * -iso_stream_alloc (unsigned mem_flags) +iso_stream_alloc (gfp_t mem_flags) { struct ehci_iso_stream *stream; @@ -851,7 +851,7 @@ iso_stream_find (struct ehci_hcd *ehci, struct urb *urb) /* ehci_iso_sched ops can be ITD-only or SITD-only */ static struct ehci_iso_sched * -iso_sched_alloc (unsigned packets, unsigned mem_flags) +iso_sched_alloc (unsigned packets, gfp_t mem_flags) { struct ehci_iso_sched *iso_sched; int size = sizeof *iso_sched; @@ -924,7 +924,7 @@ itd_urb_transaction ( struct ehci_iso_stream *stream, struct ehci_hcd *ehci, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct ehci_itd *itd; @@ -1418,7 +1418,7 @@ itd_complete ( /*-------------------------------------------------------------------------*/ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, - unsigned mem_flags) + gfp_t mem_flags) { int status = -EINVAL; unsigned long flags; @@ -1529,7 +1529,7 @@ sitd_urb_transaction ( struct ehci_iso_stream *stream, struct ehci_hcd *ehci, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct ehci_sitd *sitd; @@ -1779,7 +1779,7 @@ sitd_complete ( static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, - unsigned mem_flags) + gfp_t mem_flags) { int status = -EINVAL; unsigned long flags; diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index e142056b0d2c..2548d94fcd72 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -694,7 +694,7 @@ static int balance(struct isp116x *isp116x, u16 period, u16 load) static int isp116x_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep, struct urb *urb, - unsigned mem_flags) + gfp_t mem_flags) { struct isp116x *isp116x = hcd_to_isp116x(hcd); struct usb_device *udev = urb->dev; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 67c1aa5eb1c1..f8da8c7af7c6 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -180,7 +180,7 @@ static int ohci_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); struct ed *ed; diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index fd3c4d3714bd..9fb83dfb1eb4 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -84,7 +84,7 @@ dma_to_td (struct ohci_hcd *hc, dma_addr_t td_dma) /* TDs ... */ static struct td * -td_alloc (struct ohci_hcd *hc, unsigned mem_flags) +td_alloc (struct ohci_hcd *hc, gfp_t mem_flags) { dma_addr_t dma; struct td *td; @@ -118,7 +118,7 @@ td_free (struct ohci_hcd *hc, struct td *td) /* EDs ... */ static struct ed * -ed_alloc (struct ohci_hcd *hc, unsigned mem_flags) +ed_alloc (struct ohci_hcd *hc, gfp_t mem_flags) { dma_addr_t dma; struct ed *ed; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d42a15d10a46..cad858575cea 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -818,7 +818,7 @@ static int sl811h_urb_enqueue( struct usb_hcd *hcd, struct usb_host_endpoint *hep, struct urb *urb, - unsigned mem_flags + gfp_t mem_flags ) { struct sl811 *sl811 = hcd_to_sl811(hcd); struct usb_device *udev = urb->dev; diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index ea0d168a8c67..4e0fbe2c1a9a 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1164,7 +1164,7 @@ static struct urb *uhci_find_urb_ep(struct uhci_hcd *uhci, struct urb *urb) static int uhci_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep, - struct urb *urb, unsigned mem_flags) + struct urb *urb, gfp_t mem_flags) { int ret; struct uhci_hcd *uhci = hcd_to_uhci(hcd); diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 03fb70ef2eb3..0592cb5e6c4d 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -137,7 +137,7 @@ static void async_complete(struct urb *urb, struct pt_regs *ptregs) static struct uss720_async_request *submit_async_request(struct parport_uss720_private *priv, __u8 request, __u8 requesttype, __u16 value, __u16 index, - unsigned int mem_flags) + gfp_t mem_flags) { struct usb_device *usbdev; struct uss720_async_request *rq; @@ -204,7 +204,7 @@ static unsigned int kill_all_async_requests_priv(struct parport_uss720_private * /* --------------------------------------------------------------------- */ -static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, unsigned int mem_flags) +static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, gfp_t mem_flags) { struct parport_uss720_private *priv; struct uss720_async_request *rq; @@ -238,7 +238,7 @@ static int get_1284_register(struct parport *pp, unsigned char reg, unsigned cha return -EIO; } -static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, unsigned int mem_flags) +static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, gfp_t mem_flags) { struct parport_uss720_private *priv; struct uss720_async_request *rq; diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 861f00a43750..252a34fbb42c 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -753,7 +753,7 @@ static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb, - unsigned flags) + gfp_t flags) { int padlen; int headroom = skb_headroom(skb); diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c index c8763ae33c73..c0f263b202a6 100644 --- a/drivers/usb/net/gl620a.c +++ b/drivers/usb/net/gl620a.c @@ -301,7 +301,7 @@ static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static struct sk_buff * -genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { int padlen; int length = skb->len; diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index e04b0ce3611a..c82655d3d448 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -477,13 +477,13 @@ static int kaweth_reset(struct kaweth_device *kaweth) } static void kaweth_usb_receive(struct urb *, struct pt_regs *regs); -static int kaweth_resubmit_rx_urb(struct kaweth_device *, unsigned); +static int kaweth_resubmit_rx_urb(struct kaweth_device *, gfp_t); /**************************************************************** int_callback *****************************************************************/ -static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, int mf) +static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf) { int status; @@ -550,7 +550,7 @@ static void kaweth_resubmit_tl(void *d) * kaweth_resubmit_rx_urb ****************************************************************/ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth, - unsigned mem_flags) + gfp_t mem_flags) { int result; diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index a4309c4a491b..cee55f8cf64f 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -500,7 +500,7 @@ static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static struct sk_buff * -net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { int padlen; struct sk_buff *skb2; diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index 2ed2e5fb7778..b5a925dc1beb 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -517,7 +517,7 @@ static int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static struct sk_buff * -rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { struct rndis_data_hdr *hdr; struct sk_buff *skb2; diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 6c460918d54f..fce81d738933 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -288,7 +288,7 @@ EXPORT_SYMBOL_GPL(usbnet_defer_kevent); static void rx_complete (struct urb *urb, struct pt_regs *regs); -static void rx_submit (struct usbnet *dev, struct urb *urb, unsigned flags) +static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) { struct sk_buff *skb; struct skb_data *entry; diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h index 7aa0abd1a9bd..89fc4958eecf 100644 --- a/drivers/usb/net/usbnet.h +++ b/drivers/usb/net/usbnet.h @@ -107,7 +107,7 @@ struct driver_info { /* fixup tx packet (add framing) */ struct sk_buff *(*tx_fixup)(struct usbnet *dev, - struct sk_buff *skb, unsigned flags); + struct sk_buff *skb, gfp_t flags); /* for new devices, use the descriptor-reading code instead */ int in; /* rx endpoint */ diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c index ee3b892aeabc..5d4b7d55b097 100644 --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -62,7 +62,7 @@ */ static struct sk_buff * -zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, unsigned flags) +zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { int padlen; struct sk_buff *skb2; diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index c4e479ee926a..2f52261c7cc1 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -521,7 +521,7 @@ static int zd1201_setconfig(struct zd1201 *zd, int rid, void *buf, int len, int int reqlen; char seq=0; struct urb *urb; - unsigned int gfp_mask = wait ? GFP_NOIO : GFP_ATOMIC; + gfp_t gfp_mask = wait ? GFP_NOIO : GFP_ATOMIC; len += 4; /* first 4 are for header */ diff --git a/include/linux/usb.h b/include/linux/usb.h index 4dbe580f9335..8f731e8f2821 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -933,17 +933,17 @@ static inline void usb_fill_int_urb (struct urb *urb, } extern void usb_init_urb(struct urb *urb); -extern struct urb *usb_alloc_urb(int iso_packets, unsigned mem_flags); +extern struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags); extern void usb_free_urb(struct urb *urb); #define usb_put_urb usb_free_urb extern struct urb *usb_get_urb(struct urb *urb); -extern int usb_submit_urb(struct urb *urb, unsigned mem_flags); +extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags); extern int usb_unlink_urb(struct urb *urb); extern void usb_kill_urb(struct urb *urb); #define HAVE_USB_BUFFERS void *usb_buffer_alloc (struct usb_device *dev, size_t size, - unsigned mem_flags, dma_addr_t *dma); + gfp_t mem_flags, dma_addr_t *dma); void usb_buffer_free (struct usb_device *dev, size_t size, void *addr, dma_addr_t dma); @@ -1050,7 +1050,7 @@ int usb_sg_init ( struct scatterlist *sg, int nents, size_t length, - unsigned mem_flags + gfp_t mem_flags ); void usb_sg_cancel (struct usb_sg_request *io); void usb_sg_wait (struct usb_sg_request *io); diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h index 71e608607324..ff81117eb733 100644 --- a/include/linux/usb_gadget.h +++ b/include/linux/usb_gadget.h @@ -107,18 +107,18 @@ struct usb_ep_ops { int (*disable) (struct usb_ep *ep); struct usb_request *(*alloc_request) (struct usb_ep *ep, - unsigned gfp_flags); + gfp_t gfp_flags); void (*free_request) (struct usb_ep *ep, struct usb_request *req); void *(*alloc_buffer) (struct usb_ep *ep, unsigned bytes, - dma_addr_t *dma, unsigned gfp_flags); + dma_addr_t *dma, gfp_t gfp_flags); void (*free_buffer) (struct usb_ep *ep, void *buf, dma_addr_t dma, unsigned bytes); // NOTE: on 2.6, drivers may also use dma_map() and // dma_sync_single_*() to directly manage dma overhead. int (*queue) (struct usb_ep *ep, struct usb_request *req, - unsigned gfp_flags); + gfp_t gfp_flags); int (*dequeue) (struct usb_ep *ep, struct usb_request *req); int (*set_halt) (struct usb_ep *ep, int value); @@ -214,7 +214,7 @@ usb_ep_disable (struct usb_ep *ep) * Returns the request, or null if one could not be allocated. */ static inline struct usb_request * -usb_ep_alloc_request (struct usb_ep *ep, unsigned gfp_flags) +usb_ep_alloc_request (struct usb_ep *ep, gfp_t gfp_flags) { return ep->ops->alloc_request (ep, gfp_flags); } @@ -254,7 +254,7 @@ usb_ep_free_request (struct usb_ep *ep, struct usb_request *req) */ static inline void * usb_ep_alloc_buffer (struct usb_ep *ep, unsigned len, dma_addr_t *dma, - unsigned gfp_flags) + gfp_t gfp_flags) { return ep->ops->alloc_buffer (ep, len, dma, gfp_flags); } @@ -330,7 +330,7 @@ usb_ep_free_buffer (struct usb_ep *ep, void *buf, dma_addr_t dma, unsigned len) * reported when the usb peripheral is disconnected. */ static inline int -usb_ep_queue (struct usb_ep *ep, struct usb_request *req, unsigned gfp_flags) +usb_ep_queue (struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { return ep->ops->queue (ep, req, gfp_flags); } diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c index e0d0365453b3..f1a2e2c2e02f 100644 --- a/sound/usb/usbmidi.c +++ b/sound/usb/usbmidi.c @@ -163,7 +163,7 @@ static const uint8_t snd_usbmidi_cin_length[] = { /* * Submits the URB, with error handling. */ -static int snd_usbmidi_submit_urb(struct urb* urb, int flags) +static int snd_usbmidi_submit_urb(struct urb* urb, gfp_t flags) { int err = usb_submit_urb(urb, flags); if (err < 0 && err != -ENODEV) -- GitLab From 9796fdd829da626374458e8706daedcc0e432ddd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:03 -0400 Subject: [PATCH 0526/1519] [PATCH] gfp_t: kernel/* Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/audit.h | 4 ++-- include/linux/suspend.h | 2 +- kernel/audit.c | 6 +++--- kernel/auditsc.c | 2 +- kernel/kexec.c | 7 +++---- kernel/power/swsusp.c | 2 +- 6 files changed, 11 insertions(+), 12 deletions(-) diff --git a/include/linux/audit.h b/include/linux/audit.h index b2a2509bd7ea..da3c01955f3d 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -260,11 +260,11 @@ extern int audit_filter_user(struct netlink_skb_parms *cb, int type); #ifdef CONFIG_AUDIT /* These are defined in audit.c */ /* Public API */ -extern void audit_log(struct audit_context *ctx, int gfp_mask, +extern void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type, const char *fmt, ...) __attribute__((format(printf,4,5))); -extern struct audit_buffer *audit_log_start(struct audit_context *ctx, int gfp_mask, int type); +extern struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int type); extern void audit_log_format(struct audit_buffer *ab, const char *fmt, ...) __attribute__((format(printf,2,3))); diff --git a/include/linux/suspend.h b/include/linux/suspend.h index ad15a54806d8..ba448c760168 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -71,7 +71,7 @@ void restore_processor_state(void); struct saved_context; void __save_processor_state(struct saved_context *ctxt); void __restore_processor_state(struct saved_context *ctxt); -extern unsigned long get_usable_page(unsigned gfp_mask); +extern unsigned long get_usable_page(gfp_t gfp_mask); extern void free_eaten_memory(void); #endif /* _LINUX_SWSUSP_H */ diff --git a/kernel/audit.c b/kernel/audit.c index aefa73a8a586..0c56320d38dc 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -133,7 +133,7 @@ struct audit_buffer { struct list_head list; struct sk_buff *skb; /* formatted skb ready to send */ struct audit_context *ctx; /* NULL or associated context */ - int gfp_mask; + gfp_t gfp_mask; }; static void audit_set_pid(struct audit_buffer *ab, pid_t pid) @@ -647,7 +647,7 @@ static inline void audit_get_stamp(struct audit_context *ctx, * will be written at syscall exit. If there is no associated task, tsk * should be NULL. */ -struct audit_buffer *audit_log_start(struct audit_context *ctx, int gfp_mask, +struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int type) { struct audit_buffer *ab = NULL; @@ -879,7 +879,7 @@ void audit_log_end(struct audit_buffer *ab) /* Log an audit record. This is a convenience function that calls * audit_log_start, audit_log_vformat, and audit_log_end. It may be * called in any context. */ -void audit_log(struct audit_context *ctx, int gfp_mask, int type, +void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type, const char *fmt, ...) { struct audit_buffer *ab; diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 88696f639aab..d8a68509e729 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -803,7 +803,7 @@ static void audit_log_task_info(struct audit_buffer *ab) up_read(&mm->mmap_sem); } -static void audit_log_exit(struct audit_context *context, unsigned int gfp_mask) +static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask) { int i; struct audit_buffer *ab; diff --git a/kernel/kexec.c b/kernel/kexec.c index cdd4dcd8fb63..36c5d9cd4cc1 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -90,7 +90,7 @@ int kexec_should_crash(struct task_struct *p) static int kimage_is_destination_range(struct kimage *image, unsigned long start, unsigned long end); static struct page *kimage_alloc_page(struct kimage *image, - unsigned int gfp_mask, + gfp_t gfp_mask, unsigned long dest); static int do_kimage_alloc(struct kimage **rimage, unsigned long entry, @@ -326,8 +326,7 @@ static int kimage_is_destination_range(struct kimage *image, return 0; } -static struct page *kimage_alloc_pages(unsigned int gfp_mask, - unsigned int order) +static struct page *kimage_alloc_pages(gfp_t gfp_mask, unsigned int order) { struct page *pages; @@ -654,7 +653,7 @@ static kimage_entry_t *kimage_dst_used(struct kimage *image, } static struct page *kimage_alloc_page(struct kimage *image, - unsigned int gfp_mask, + gfp_t gfp_mask, unsigned long destination) { /* diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c index 2d5c45676442..10bc5ec496d7 100644 --- a/kernel/power/swsusp.c +++ b/kernel/power/swsusp.c @@ -1095,7 +1095,7 @@ static inline void eat_page(void *page) *eaten_memory = c; } -unsigned long get_usable_page(unsigned gfp_mask) +unsigned long get_usable_page(gfp_t gfp_mask) { unsigned long m; -- GitLab From c53033f6b0bd7cc133b7f433083f0394cf29ac70 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:08 -0400 Subject: [PATCH 0527/1519] [PATCH] gfp_t: drivers/scsi Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/scsi/eata.c | 2 +- drivers/scsi/hosts.c | 3 ++- drivers/scsi/lpfc/lpfc_mem.c | 2 +- drivers/scsi/osst.c | 6 ++++-- drivers/scsi/qla2xxx/qla_gbl.h | 4 ++-- drivers/scsi/qla2xxx/qla_init.c | 2 +- drivers/scsi/qla2xxx/qla_rscn.c | 2 +- drivers/scsi/scsi.c | 8 ++++---- drivers/scsi/scsi_ioctl.c | 3 ++- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/sg.c | 2 +- drivers/scsi/st.c | 6 ++++-- include/scsi/scsi_cmnd.h | 2 +- include/scsi/scsi_request.h | 2 +- 14 files changed, 26 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index c10e45b94b62..3d13fdee4fc2 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -1357,7 +1357,7 @@ static int port_detect(unsigned long port_base, unsigned int j, for (i = 0; i < shost->can_queue; i++) { size_t sz = shost->sg_tablesize *sizeof(struct sg_list); - unsigned int gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC; + gfp_t gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC; ha->cp[i].sglist = kmalloc(sz, gfp_mask); if (!ha->cp[i].sglist) { printk diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 02fe371b0ab8..f24d84538fd5 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -287,7 +287,8 @@ static void scsi_host_dev_release(struct device *dev) struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) { struct Scsi_Host *shost; - int gfp_mask = GFP_KERNEL, rval; + gfp_t gfp_mask = GFP_KERNEL; + int rval; if (sht->unchecked_isa_dma && privsize) gfp_mask |= __GFP_DMA; diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 0aba13ceaacf..352df47bcaca 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -39,7 +39,7 @@ #define LPFC_MEM_POOL_SIZE 64 /* max elem in non-DMA safety pool */ static void * -lpfc_pool_kmalloc(unsigned int gfp_flags, void *data) +lpfc_pool_kmalloc(gfp_t gfp_flags, void *data) { return kmalloc((unsigned long)data, gfp_flags); } diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 3f2f2464fa63..af1133104b3f 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5146,7 +5146,8 @@ static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned /* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */ static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg ) { - int i, priority; + int i; + gfp_t priority; struct osst_buffer *tb; if (from_initialization) @@ -5178,7 +5179,8 @@ static struct osst_buffer * new_tape_buffer( int from_initialization, int need_d /* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */ static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma) { - int segs, nbr, max_segs, b_size, priority, order, got; + int segs, nbr, max_segs, b_size, order, got; + gfp_t priority; if (STbuffer->buffer_size >= OS_FRAME_SIZE) return 1; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 1ed32e7b5472..e451941ad81d 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -52,7 +52,7 @@ extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *); extern int qla24xx_load_risc_hotplug(scsi_qla_host_t *, uint32_t *); -extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, int); +extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t); extern int qla2x00_loop_resync(scsi_qla_host_t *); @@ -277,7 +277,7 @@ extern int qla2x00_fdmi_register(scsi_qla_host_t *); /* * Global Function Prototypes in qla_rscn.c source file. */ -extern fc_port_t *qla2x00_alloc_rscn_fcport(scsi_qla_host_t *, int); +extern fc_port_t *qla2x00_alloc_rscn_fcport(scsi_qla_host_t *, gfp_t); extern int qla2x00_handle_port_rscn(scsi_qla_host_t *, uint32_t, fc_port_t *, int); extern void qla2x00_process_iodesc(scsi_qla_host_t *, struct mbx_entry *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 23d095d3817b..fbb6feee40cf 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1685,7 +1685,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) * Returns a pointer to the allocated fcport, or NULL, if none available. */ fc_port_t * -qla2x00_alloc_fcport(scsi_qla_host_t *ha, int flags) +qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags) { fc_port_t *fcport; diff --git a/drivers/scsi/qla2xxx/qla_rscn.c b/drivers/scsi/qla2xxx/qla_rscn.c index 1eba98828636..7534efcc8918 100644 --- a/drivers/scsi/qla2xxx/qla_rscn.c +++ b/drivers/scsi/qla2xxx/qla_rscn.c @@ -1066,7 +1066,7 @@ qla2x00_send_login_iocb_cb(scsi_qla_host_t *ha, struct io_descriptor *iodesc, * Returns a pointer to the allocated RSCN fcport, or NULL, if none available. */ fc_port_t * -qla2x00_alloc_rscn_fcport(scsi_qla_host_t *ha, int flags) +qla2x00_alloc_rscn_fcport(scsi_qla_host_t *ha, gfp_t flags) { fc_port_t *fcport; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 1f0ebabf6d47..a5711d545d71 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -130,7 +130,7 @@ EXPORT_SYMBOL(scsi_device_types); * Returns: Pointer to request block. */ struct scsi_request *scsi_allocate_request(struct scsi_device *sdev, - int gfp_mask) + gfp_t gfp_mask) { const int offset = ALIGN(sizeof(struct scsi_request), 4); const int size = offset + sizeof(struct request); @@ -196,7 +196,7 @@ struct scsi_host_cmd_pool { unsigned int users; char *name; unsigned int slab_flags; - unsigned int gfp_mask; + gfp_t gfp_mask; }; static struct scsi_host_cmd_pool scsi_cmd_pool = { @@ -213,7 +213,7 @@ static struct scsi_host_cmd_pool scsi_cmd_dma_pool = { static DECLARE_MUTEX(host_cmd_pool_mutex); static struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, - int gfp_mask) + gfp_t gfp_mask) { struct scsi_cmnd *cmd; @@ -245,7 +245,7 @@ static struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, * * Returns: The allocated scsi command structure. */ -struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, int gfp_mask) +struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask) { struct scsi_cmnd *cmd; diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index de7f98cc38fe..6a3f6aae8a97 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -205,7 +205,8 @@ int scsi_ioctl_send_command(struct scsi_device *sdev, unsigned int inlen, outlen, cmdlen; unsigned int needed, buf_needed; int timeout, retries, result; - int data_direction, gfp_mask = GFP_KERNEL; + int data_direction; + gfp_t gfp_mask = GFP_KERNEL; if (!sic) return -EINVAL; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 0074f28c37b2..3ff538809786 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -677,7 +677,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int uptodate, return NULL; } -static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, int gfp_mask) +static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, gfp_t gfp_mask) { struct scsi_host_sg_pool *sgp; struct scatterlist *sgl; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index ad94367df430..fd56b7ec88b6 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2644,7 +2644,7 @@ static char * sg_page_malloc(int rqSz, int lowDma, int *retSzp) { char *resp = NULL; - int page_mask; + gfp_t page_mask; int order, a_size; int resSz = rqSz; diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index d001c046551b..927d700f0073 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3577,7 +3577,8 @@ static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long a static struct st_buffer * new_tape_buffer(int from_initialization, int need_dma, int max_sg) { - int i, priority, got = 0, segs = 0; + int i, got = 0, segs = 0; + gfp_t priority; struct st_buffer *tb; if (from_initialization) @@ -3610,7 +3611,8 @@ static struct st_buffer * /* Try to allocate enough space in the tape buffer */ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma) { - int segs, nbr, max_segs, b_size, priority, order, got; + int segs, nbr, max_segs, b_size, order, got; + gfp_t priority; if (new_size <= STbuffer->buffer_size) return 1; diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index bed4b7c9be99..e6b61fab66dd 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -146,7 +146,7 @@ struct scsi_cmnd { #define SCSI_STATE_MLQUEUE 0x100b -extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, int); +extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int); extern void scsi_finish_command(struct scsi_cmnd *cmd); diff --git a/include/scsi/scsi_request.h b/include/scsi/scsi_request.h index 6a140020d7cb..2539debb7993 100644 --- a/include/scsi/scsi_request.h +++ b/include/scsi/scsi_request.h @@ -45,7 +45,7 @@ struct scsi_request { level driver) of this request */ }; -extern struct scsi_request *scsi_allocate_request(struct scsi_device *, int); +extern struct scsi_request *scsi_allocate_request(struct scsi_device *, gfp_t); extern void scsi_release_request(struct scsi_request *); extern void scsi_wait_req(struct scsi_request *, const void *cmnd, void *buffer, unsigned bufflen, -- GitLab From 87b750dc4b7109aa744e7d331dc93df3fe5c1c28 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:13 -0400 Subject: [PATCH 0528/1519] [PATCH] gfp_t: drivers/infiniband Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/infiniband/hw/mthca/mthca_cmd.c | 2 +- drivers/infiniband/hw/mthca/mthca_cmd.h | 2 +- drivers/infiniband/hw/mthca/mthca_memfree.c | 2 +- drivers/infiniband/hw/mthca/mthca_memfree.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index f6a8ac026557..378646b5a1b8 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -524,7 +524,7 @@ void mthca_cmd_use_polling(struct mthca_dev *dev) } struct mthca_mailbox *mthca_alloc_mailbox(struct mthca_dev *dev, - unsigned int gfp_mask) + gfp_t gfp_mask) { struct mthca_mailbox *mailbox; diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h index 65f976a13e02..18175bec84c2 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.h +++ b/drivers/infiniband/hw/mthca/mthca_cmd.h @@ -248,7 +248,7 @@ void mthca_cmd_event(struct mthca_dev *dev, u16 token, u8 status, u64 out_param); struct mthca_mailbox *mthca_alloc_mailbox(struct mthca_dev *dev, - unsigned int gfp_mask); + gfp_t gfp_mask); void mthca_free_mailbox(struct mthca_dev *dev, struct mthca_mailbox *mailbox); int mthca_SYS_EN(struct mthca_dev *dev, u8 *status); diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 7bd7a4bec7b4..9ad8b3b6cfef 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -82,7 +82,7 @@ void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm) } struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, - unsigned int gfp_mask) + gfp_t gfp_mask) { struct mthca_icm *icm; struct mthca_icm_chunk *chunk = NULL; diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index bafa51544aa3..29433f295253 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -77,7 +77,7 @@ struct mthca_icm_iter { struct mthca_dev; struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, - unsigned int gfp_mask); + gfp_t gfp_mask); void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm); struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, -- GitLab From 1ef64e670e3bc27e0c3c83810ca36e19924c35c6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:18 -0400 Subject: [PATCH 0529/1519] [PATCH] gfp_t: sound Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/ppc/8xx_io/cs4218.h | 2 +- arch/ppc/8xx_io/cs4218_tdm.c | 4 ++-- include/sound/memalloc.h | 2 +- sound/core/memalloc.c | 4 ++-- sound/core/seq/instr/ainstr_gf1.c | 5 +++-- sound/core/seq/instr/ainstr_iw.c | 4 ++-- sound/core/seq/instr/ainstr_simple.c | 3 ++- sound/oss/dmasound/dmasound.h | 2 +- sound/oss/dmasound/dmasound_atari.c | 4 ++-- sound/oss/dmasound/dmasound_awacs.c | 4 ++-- sound/oss/dmasound/dmasound_paula.c | 4 ++-- sound/oss/dmasound/dmasound_q40.c | 4 ++-- 12 files changed, 22 insertions(+), 20 deletions(-) diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h index a3c38c5a5db2..f1c7392255f8 100644 --- a/arch/ppc/8xx_io/cs4218.h +++ b/arch/ppc/8xx_io/cs4218.h @@ -78,7 +78,7 @@ typedef struct { const char *name2; void (*open)(void); void (*release)(void); - void *(*dma_alloc)(unsigned int, int); + void *(*dma_alloc)(unsigned int, gfp_t); void (*dma_free)(void *, unsigned int); int (*irqinit)(void); #ifdef MODULE diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 2ca9ec7ec3a7..532caa388dc2 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -318,7 +318,7 @@ struct cs_sound_settings { static struct cs_sound_settings sound; -static void *CS_Alloc(unsigned int size, int flags); +static void *CS_Alloc(unsigned int size, gfp_t flags); static void CS_Free(void *ptr, unsigned int size); static int CS_IrqInit(void); #ifdef MODULE @@ -959,7 +959,7 @@ static TRANS transCSNormalRead = { /*** Low level stuff *********************************************************/ -static void *CS_Alloc(unsigned int size, int flags) +static void *CS_Alloc(unsigned int size, gfp_t flags) { int order; diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h index 3a2fd2cc9f19..83489c3abbaf 100644 --- a/include/sound/memalloc.h +++ b/include/sound/memalloc.h @@ -111,7 +111,7 @@ size_t snd_dma_get_reserved_buf(struct snd_dma_buffer *dmab, unsigned int id); int snd_dma_reserve_buf(struct snd_dma_buffer *dmab, unsigned int id); /* basic memory allocation functions */ -void *snd_malloc_pages(size_t size, unsigned int gfp_flags); +void *snd_malloc_pages(size_t size, gfp_t gfp_flags); void snd_free_pages(void *ptr, size_t size); #endif /* __SOUND_MEMALLOC_H */ diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index e72cec77f0db..129abab5ce98 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -190,7 +190,7 @@ static void unmark_pages(struct page *page, int order) * * Returns the pointer of the buffer, or NULL if no enoguh memory. */ -void *snd_malloc_pages(size_t size, unsigned int gfp_flags) +void *snd_malloc_pages(size_t size, gfp_t gfp_flags) { int pg; void *res; @@ -235,7 +235,7 @@ static void *snd_malloc_dev_pages(struct device *dev, size_t size, dma_addr_t *d { int pg; void *res; - unsigned int gfp_flags; + gfp_t gfp_flags; snd_assert(size > 0, return NULL); snd_assert(dma != NULL, return NULL); diff --git a/sound/core/seq/instr/ainstr_gf1.c b/sound/core/seq/instr/ainstr_gf1.c index 207c2c54bf1d..0e4df8826eed 100644 --- a/sound/core/seq/instr/ainstr_gf1.c +++ b/sound/core/seq/instr/ainstr_gf1.c @@ -51,7 +51,7 @@ static int snd_seq_gf1_copy_wave_from_stream(snd_gf1_ops_t *ops, gf1_wave_t *wp, *prev; gf1_xwave_t xp; int err; - unsigned int gfp_mask; + gfp_t gfp_mask; unsigned int real_size; gfp_mask = atomic ? GFP_ATOMIC : GFP_KERNEL; @@ -144,7 +144,8 @@ static int snd_seq_gf1_put(void *private_data, snd_seq_kinstr_t *instr, snd_gf1_ops_t *ops = (snd_gf1_ops_t *)private_data; gf1_instrument_t *ip; gf1_xinstrument_t ix; - int err, gfp_mask; + int err; + gfp_t gfp_mask; if (cmd != SNDRV_SEQ_INSTR_PUT_CMD_CREATE) return -EINVAL; diff --git a/sound/core/seq/instr/ainstr_iw.c b/sound/core/seq/instr/ainstr_iw.c index 67c24c8e8e7b..7c19fbbc5d0f 100644 --- a/sound/core/seq/instr/ainstr_iw.c +++ b/sound/core/seq/instr/ainstr_iw.c @@ -129,7 +129,7 @@ static int snd_seq_iwffff_copy_wave_from_stream(snd_iwffff_ops_t *ops, iwffff_wave_t *wp, *prev; iwffff_xwave_t xp; int err; - unsigned int gfp_mask; + gfp_t gfp_mask; unsigned int real_size; gfp_mask = atomic ? GFP_ATOMIC : GFP_KERNEL; @@ -236,7 +236,7 @@ static int snd_seq_iwffff_put(void *private_data, snd_seq_kinstr_t *instr, iwffff_layer_t *lp, *prev_lp; iwffff_xlayer_t lx; int err; - unsigned int gfp_mask; + gfp_t gfp_mask; if (cmd != SNDRV_SEQ_INSTR_PUT_CMD_CREATE) return -EINVAL; diff --git a/sound/core/seq/instr/ainstr_simple.c b/sound/core/seq/instr/ainstr_simple.c index 6183d2151034..17ab94e76073 100644 --- a/sound/core/seq/instr/ainstr_simple.c +++ b/sound/core/seq/instr/ainstr_simple.c @@ -57,7 +57,8 @@ static int snd_seq_simple_put(void *private_data, snd_seq_kinstr_t *instr, snd_simple_ops_t *ops = (snd_simple_ops_t *)private_data; simple_instrument_t *ip; simple_xinstrument_t ix; - int err, gfp_mask; + int err; + gfp_t gfp_mask; unsigned int real_size; if (cmd != SNDRV_SEQ_INSTR_PUT_CMD_CREATE) diff --git a/sound/oss/dmasound/dmasound.h b/sound/oss/dmasound/dmasound.h index 9a2f50f0b184..222014cafc1a 100644 --- a/sound/oss/dmasound/dmasound.h +++ b/sound/oss/dmasound/dmasound.h @@ -116,7 +116,7 @@ typedef struct { const char *name; const char *name2; struct module *owner; - void *(*dma_alloc)(unsigned int, int); + void *(*dma_alloc)(unsigned int, gfp_t); void (*dma_free)(void *, unsigned int); int (*irqinit)(void); #ifdef MODULE diff --git a/sound/oss/dmasound/dmasound_atari.c b/sound/oss/dmasound/dmasound_atari.c index 8daaf87664ba..59eb53f89318 100644 --- a/sound/oss/dmasound/dmasound_atari.c +++ b/sound/oss/dmasound/dmasound_atari.c @@ -114,7 +114,7 @@ static ssize_t ata_ctx_u16le(const u_char *userPtr, size_t userCount, /*** Low level stuff *********************************************************/ -static void *AtaAlloc(unsigned int size, int flags); +static void *AtaAlloc(unsigned int size, gfp_t flags); static void AtaFree(void *, unsigned int size); static int AtaIrqInit(void); #ifdef MODULE @@ -810,7 +810,7 @@ static TRANS transFalconExpanding = { * Atari (TT/Falcon) */ -static void *AtaAlloc(unsigned int size, int flags) +static void *AtaAlloc(unsigned int size, gfp_t flags) { return atari_stram_alloc(size, "dmasound"); } diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c index 2ceb46f1d40f..b2bf8bac842d 100644 --- a/sound/oss/dmasound/dmasound_awacs.c +++ b/sound/oss/dmasound/dmasound_awacs.c @@ -271,7 +271,7 @@ int expand_read_bal; /* Balance factor for expanding reads (not volume!) */ /*** Low level stuff *********************************************************/ -static void *PMacAlloc(unsigned int size, int flags); +static void *PMacAlloc(unsigned int size, gfp_t flags); static void PMacFree(void *ptr, unsigned int size); static int PMacIrqInit(void); #ifdef MODULE @@ -614,7 +614,7 @@ tas_init_frame_rates(unsigned int *prop, unsigned int l) /* * PCI PowerMac, with AWACS, Screamer, Burgundy, DACA or Tumbler and DBDMA. */ -static void *PMacAlloc(unsigned int size, int flags) +static void *PMacAlloc(unsigned int size, gfp_t flags) { return kmalloc(size, flags); } diff --git a/sound/oss/dmasound/dmasound_paula.c b/sound/oss/dmasound/dmasound_paula.c index 558db5311e06..d59f60b26410 100644 --- a/sound/oss/dmasound/dmasound_paula.c +++ b/sound/oss/dmasound/dmasound_paula.c @@ -69,7 +69,7 @@ static int write_sq_block_size_half, write_sq_block_size_quarter; /*** Low level stuff *********************************************************/ -static void *AmiAlloc(unsigned int size, int flags); +static void *AmiAlloc(unsigned int size, gfp_t flags); static void AmiFree(void *obj, unsigned int size); static int AmiIrqInit(void); #ifdef MODULE @@ -317,7 +317,7 @@ static inline void StopDMA(void) enable_heartbeat(); } -static void *AmiAlloc(unsigned int size, int flags) +static void *AmiAlloc(unsigned int size, gfp_t flags) { return amiga_chip_alloc((long)size, "dmasound [Paula]"); } diff --git a/sound/oss/dmasound/dmasound_q40.c b/sound/oss/dmasound/dmasound_q40.c index 92c25a0174db..1ddaa6284b08 100644 --- a/sound/oss/dmasound/dmasound_q40.c +++ b/sound/oss/dmasound/dmasound_q40.c @@ -36,7 +36,7 @@ static int expand_data; /* Data for expanding */ /*** Low level stuff *********************************************************/ -static void *Q40Alloc(unsigned int size, int flags); +static void *Q40Alloc(unsigned int size, gfp_t flags); static void Q40Free(void *, unsigned int); static int Q40IrqInit(void); #ifdef MODULE @@ -358,7 +358,7 @@ static TRANS transQ40Compressing = { /*** Low level stuff *********************************************************/ -static void *Q40Alloc(unsigned int size, int flags) +static void *Q40Alloc(unsigned int size, gfp_t flags) { return kmalloc(size, flags); /* change to vmalloc */ } -- GitLab From 53f9fc93f90a43701d6aaf3919be0614bb088b83 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:24 -0400 Subject: [PATCH 0530/1519] [PATCH] gfp_t: remaining bits of arch/* Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/pci_iommu.c | 2 +- arch/ia64/sn/kernel/xpc.h | 2 +- arch/ppc/mm/pgtable.c | 4 ++-- arch/sparc64/solaris/socksys.c | 2 +- arch/sparc64/solaris/timod.c | 2 +- arch/um/kernel/mem.c | 2 +- arch/um/kernel/process_kern.c | 2 +- include/asm-um/page.h | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index 7cb23f12ecbd..c468e312e5f8 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -397,7 +397,7 @@ pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp) { void *cpu_addr; long order = get_order(size); - int gfp = GFP_ATOMIC; + gfp_t gfp = GFP_ATOMIC; try_again: cpu_addr = (void *)__get_free_pages(gfp, order); diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h index d0ee635daf2e..e5f5a4e51f70 100644 --- a/arch/ia64/sn/kernel/xpc.h +++ b/arch/ia64/sn/kernel/xpc.h @@ -939,7 +939,7 @@ xpc_map_bte_errors(bte_result_t error) static inline void * -xpc_kmalloc_cacheline_aligned(size_t size, int flags, void **base) +xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) { /* see if kmalloc will give us cachline aligned memory by default */ *base = kmalloc(size, flags); diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 81a3d7446d37..43505b1fc5d8 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -114,9 +114,9 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) struct page *ptepage; #ifdef CONFIG_HIGHPTE - int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT; + gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT; #else - int flags = GFP_KERNEL | __GFP_REPEAT; + gfp_t flags = GFP_KERNEL | __GFP_REPEAT; #endif ptepage = alloc_pages(flags, 0); diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c index d7c1c76582cc..fc6669e8dde1 100644 --- a/arch/sparc64/solaris/socksys.c +++ b/arch/sparc64/solaris/socksys.c @@ -49,7 +49,7 @@ IPPROTO_EGP, IPPROTO_PUP, IPPROTO_UDP, IPPROTO_IDP, IPPROTO_RAW, #else -extern void * mykmalloc(size_t s, int gfp); +extern void * mykmalloc(size_t s, gfp_t gfp); extern void mykfree(void *); #endif diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c index aaad29c35c83..b84e5456b025 100644 --- a/arch/sparc64/solaris/timod.c +++ b/arch/sparc64/solaris/timod.c @@ -39,7 +39,7 @@ static char * page = NULL ; #else -void * mykmalloc(size_t s, int gfp) +void * mykmalloc(size_t s, gfp_t gfp) { static char * page; static size_t free; diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index ea008b031a8f..462cc9d65386 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -252,7 +252,7 @@ void paging_init(void) #endif } -struct page *arch_validate(struct page *page, int mask, int order) +struct page *arch_validate(struct page *page, gfp_t mask, int order) { unsigned long addr, zero = 0; int i; diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c index ea65db679e9c..0d73ceeece72 100644 --- a/arch/um/kernel/process_kern.c +++ b/arch/um/kernel/process_kern.c @@ -80,7 +80,7 @@ void free_stack(unsigned long stack, int order) unsigned long alloc_stack(int order, int atomic) { unsigned long page; - int flags = GFP_KERNEL; + gfp_t flags = GFP_KERNEL; if (atomic) flags = GFP_ATOMIC; diff --git a/include/asm-um/page.h b/include/asm-um/page.h index 2c192abe9aeb..0229814af31e 100644 --- a/include/asm-um/page.h +++ b/include/asm-um/page.h @@ -115,7 +115,7 @@ extern unsigned long uml_physmem; #define pfn_valid(pfn) ((pfn) < max_mapnr) #define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v))) -extern struct page *arch_validate(struct page *page, int mask, int order); +extern struct page *arch_validate(struct page *page, gfp_t mask, int order); #define HAVE_ARCH_VALIDATE extern void arch_free_page(struct page *page, int order); -- GitLab From 9e24974db6b01ec067c24de09588282b6a1407f0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:29 -0400 Subject: [PATCH 0531/1519] [PATCH] gfp_t: drivers/net Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/cassini.c | 4 ++-- drivers/net/lance.c | 4 ++-- drivers/net/myri_sbus.c | 2 +- drivers/net/myri_sbus.h | 2 +- drivers/net/sunbmac.c | 3 ++- drivers/net/sunbmac.h | 2 +- 6 files changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 2e617424d3fb..50f43dbf31ae 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -489,7 +489,7 @@ static int cas_page_free(struct cas *cp, cas_page_t *page) /* local page allocation routines for the receive buffers. jumbo pages * require at least 8K contiguous and 8K aligned buffers. */ -static cas_page_t *cas_page_alloc(struct cas *cp, const int flags) +static cas_page_t *cas_page_alloc(struct cas *cp, const gfp_t flags) { cas_page_t *page; @@ -561,7 +561,7 @@ static void cas_spare_free(struct cas *cp) } /* replenish spares if needed */ -static void cas_spare_recover(struct cas *cp, const int flags) +static void cas_spare_recover(struct cas *cp, const gfp_t flags) { struct list_head list, *elem, *tmp; int needed, i; diff --git a/drivers/net/lance.c b/drivers/net/lance.c index b4929beb33b2..1d75ca0bb939 100644 --- a/drivers/net/lance.c +++ b/drivers/net/lance.c @@ -298,7 +298,7 @@ enum {OLD_LANCE = 0, PCNET_ISA=1, PCNET_ISAP=2, PCNET_PCI=3, PCNET_VLB=4, PCNET_ static unsigned char lance_need_isa_bounce_buffers = 1; static int lance_open(struct net_device *dev); -static void lance_init_ring(struct net_device *dev, int mode); +static void lance_init_ring(struct net_device *dev, gfp_t mode); static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev); static int lance_rx(struct net_device *dev); static irqreturn_t lance_interrupt(int irq, void *dev_id, struct pt_regs *regs); @@ -846,7 +846,7 @@ lance_purge_ring(struct net_device *dev) /* Initialize the LANCE Rx and Tx rings. */ static void -lance_init_ring(struct net_device *dev, int gfp) +lance_init_ring(struct net_device *dev, gfp_t gfp) { struct lance_private *lp = dev->priv; int i; diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c index f0996ce5c268..6c86dca62e2a 100644 --- a/drivers/net/myri_sbus.c +++ b/drivers/net/myri_sbus.c @@ -277,7 +277,7 @@ static void myri_init_rings(struct myri_eth *mp, int from_irq) struct recvq __iomem *rq = mp->rq; struct myri_rxd __iomem *rxd = &rq->myri_rxd[0]; struct net_device *dev = mp->dev; - int gfp_flags = GFP_KERNEL; + gfp_t gfp_flags = GFP_KERNEL; int i; if (from_irq || in_interrupt()) diff --git a/drivers/net/myri_sbus.h b/drivers/net/myri_sbus.h index 9391e55a5e92..47722f708a41 100644 --- a/drivers/net/myri_sbus.h +++ b/drivers/net/myri_sbus.h @@ -296,7 +296,7 @@ struct myri_eth { /* We use this to acquire receive skb's that we can DMA directly into. */ #define ALIGNED_RX_SKB_ADDR(addr) \ ((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr)) -static inline struct sk_buff *myri_alloc_skb(unsigned int length, int gfp_flags) +static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags) { struct sk_buff *skb; diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c index f88f5e32b714..cfaf47c63c58 100644 --- a/drivers/net/sunbmac.c +++ b/drivers/net/sunbmac.c @@ -214,7 +214,8 @@ static void bigmac_init_rings(struct bigmac *bp, int from_irq) { struct bmac_init_block *bb = bp->bmac_block; struct net_device *dev = bp->dev; - int i, gfp_flags = GFP_KERNEL; + int i; + gfp_t gfp_flags = GFP_KERNEL; if (from_irq || in_interrupt()) gfp_flags = GFP_ATOMIC; diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h index 5674003fc38a..b0dbc5187143 100644 --- a/drivers/net/sunbmac.h +++ b/drivers/net/sunbmac.h @@ -339,7 +339,7 @@ struct bigmac { #define ALIGNED_RX_SKB_ADDR(addr) \ ((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr)) -static inline struct sk_buff *big_mac_alloc_skb(unsigned int length, int gfp_flags) +static inline struct sk_buff *big_mac_alloc_skb(unsigned int length, gfp_t gfp_flags) { struct sk_buff *skb; -- GitLab From b4e3ca1ab1ae9ae86134126dcdc88da1caaa32ca Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:34 -0400 Subject: [PATCH 0532/1519] [PATCH] gfp_t: remaining bits of drivers/* Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/block/loop.c | 2 +- drivers/block/rd.c | 2 +- drivers/char/n_tty.c | 2 +- drivers/ieee1394/eth1394.c | 2 +- drivers/md/bitmap.c | 2 +- drivers/md/dm-crypt.c | 2 +- drivers/s390/net/fsm.c | 2 +- drivers/s390/net/fsm.h | 2 +- include/linux/i2o.h | 4 ++-- include/linux/loop.h | 2 +- 10 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index b35e08876dd4..96c664af8d06 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -881,7 +881,7 @@ loop_init_xfer(struct loop_device *lo, struct loop_func_table *xfer, static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev) { struct file *filp = lo->lo_backing_file; - int gfp = lo->old_gfp_mask; + gfp_t gfp = lo->old_gfp_mask; if (lo->lo_state != Lo_bound) return -ENXIO; diff --git a/drivers/block/rd.c b/drivers/block/rd.c index 145c1fbffe01..68c60a5bcdab 100644 --- a/drivers/block/rd.c +++ b/drivers/block/rd.c @@ -348,7 +348,7 @@ static int rd_open(struct inode *inode, struct file *filp) struct block_device *bdev = inode->i_bdev; struct address_space *mapping; unsigned bsize; - int gfp_mask; + gfp_t gfp_mask; inode = igrab(bdev->bd_inode); rd_bdev[unit] = bdev; diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index c9bdf544ed2c..c556f4d3ccd7 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -62,7 +62,7 @@ static inline unsigned char *alloc_buf(void) { - unsigned int prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; + gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; if (PAGE_SIZE != N_TTY_BUF_SIZE) return kmalloc(N_TTY_BUF_SIZE, prio); diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c index 4802bbbb6dc9..c9e92d85c893 100644 --- a/drivers/ieee1394/eth1394.c +++ b/drivers/ieee1394/eth1394.c @@ -1630,7 +1630,7 @@ static void ether1394_complete_cb(void *__ptask) /* Transmit a packet (called by kernel) */ static int ether1394_tx (struct sk_buff *skb, struct net_device *dev) { - int kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; + gfp_t kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; struct eth1394hdr *eth; struct eth1394_priv *priv = netdev_priv(dev); int proto; diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 2fba2bbe72d8..01654fcabc52 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -91,7 +91,7 @@ int bitmap_active(struct bitmap *bitmap) #define WRITE_POOL_SIZE 256 /* mempool for queueing pending writes on the bitmap file */ -static void *write_pool_alloc(unsigned int gfp_flags, void *data) +static void *write_pool_alloc(gfp_t gfp_flags, void *data) { return kmalloc(sizeof(struct page_list), gfp_flags); } diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index b6148f6f7836..28c1a628621f 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -331,7 +331,7 @@ crypt_alloc_buffer(struct crypt_config *cc, unsigned int size, { struct bio *bio; unsigned int nr_iovecs = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; - int gfp_mask = GFP_NOIO | __GFP_HIGHMEM; + gfp_t gfp_mask = GFP_NOIO | __GFP_HIGHMEM; unsigned int i; /* diff --git a/drivers/s390/net/fsm.c b/drivers/s390/net/fsm.c index fa09440d82e5..38f50b7129a2 100644 --- a/drivers/s390/net/fsm.c +++ b/drivers/s390/net/fsm.c @@ -16,7 +16,7 @@ MODULE_LICENSE("GPL"); fsm_instance * init_fsm(char *name, const char **state_names, const char **event_names, int nr_states, - int nr_events, const fsm_node *tmpl, int tmpl_len, int order) + int nr_events, const fsm_node *tmpl, int tmpl_len, gfp_t order) { int i; fsm_instance *this; diff --git a/drivers/s390/net/fsm.h b/drivers/s390/net/fsm.h index f9a011001eb6..1b8a7e7c34f3 100644 --- a/drivers/s390/net/fsm.h +++ b/drivers/s390/net/fsm.h @@ -110,7 +110,7 @@ extern fsm_instance * init_fsm(char *name, const char **state_names, const char **event_names, int nr_states, int nr_events, const fsm_node *tmpl, - int tmpl_len, int order); + int tmpl_len, gfp_t order); /** * Releases an FSM diff --git a/include/linux/i2o.h b/include/linux/i2o.h index bdc286ec947c..b4af45aad25d 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -492,7 +492,7 @@ static inline int i2o_dma_map_sg(struct i2o_controller *c, * Returns 0 on success or -ENOMEM on failure. */ static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, - size_t len, unsigned int gfp_mask) + size_t len, gfp_t gfp_mask) { struct pci_dev *pdev = to_pci_dev(dev); int dma_64 = 0; @@ -551,7 +551,7 @@ static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr) * Returns the 0 on success or negative error code on failure. */ static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, - size_t len, unsigned int gfp_mask) + size_t len, gfp_t gfp_mask) { i2o_dma_free(dev, addr); diff --git a/include/linux/loop.h b/include/linux/loop.h index 53fa51595443..40f63c9879d2 100644 --- a/include/linux/loop.h +++ b/include/linux/loop.h @@ -52,7 +52,7 @@ struct loop_device { unsigned lo_blocksize; void *key_data; - int old_gfp_mask; + gfp_t old_gfp_mask; spinlock_t lo_lock; struct bio *lo_bio; -- GitLab From c4cdd038318863e912e9b992489f61497f98b442 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:39 -0400 Subject: [PATCH 0533/1519] [PATCH] gfp_t: reiserfs mapping_set_gfp_mask() use Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- fs/reiserfs/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 87ac9dc8b381..72e120798677 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -453,7 +453,7 @@ static struct page *reiserfs_get_page(struct inode *dir, unsigned long n) struct page *page; /* We can deadlock if we try to free dentries, and an unlink/rmdir has just occured - GFP_NOFS avoids this */ - mapping->flags = (mapping->flags & ~__GFP_BITS_MASK) | GFP_NOFS; + mapping_set_gfp_mask(mapping, GFP_NOFS); page = read_cache_page(mapping, n, (filler_t *) mapping->a_ops->readpage, NULL); if (!IS_ERR(page)) { -- GitLab From 260b23674fdb570f3235ce55892246bef1c24c2a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 21 Oct 2005 03:22:44 -0400 Subject: [PATCH 0534/1519] [PATCH] gfp_t: the rest zone handling, mapping->flags handling Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 2 +- include/linux/pagemap.h | 7 ++++--- mm/highmem.c | 14 +++++++++----- mm/page_alloc.c | 29 +++++++++++++++-------------- 4 files changed, 29 insertions(+), 23 deletions(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 5ed471b58f4f..7519eb4191e7 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -302,7 +302,7 @@ void get_zone_counts(unsigned long *active, unsigned long *inactive, void build_all_zonelists(void); void wakeup_kswapd(struct zone *zone, int order); int zone_watermark_ok(struct zone *z, int order, unsigned long mark, - int alloc_type, int can_try_harder, int gfp_high); + int alloc_type, int can_try_harder, gfp_t gfp_high); #ifdef CONFIG_HAVE_MEMORY_PRESENT void memory_present(int nid, unsigned long start, unsigned long end); diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index efbae53fb078..ba6c310a055f 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -21,16 +21,17 @@ static inline gfp_t mapping_gfp_mask(struct address_space * mapping) { - return mapping->flags & __GFP_BITS_MASK; + return (__force gfp_t)mapping->flags & __GFP_BITS_MASK; } /* * This is non-atomic. Only to be used before the mapping is activated. * Probably needs a barrier... */ -static inline void mapping_set_gfp_mask(struct address_space *m, int mask) +static inline void mapping_set_gfp_mask(struct address_space *m, gfp_t mask) { - m->flags = (m->flags & ~__GFP_BITS_MASK) | mask; + m->flags = (m->flags & ~(__force unsigned long)__GFP_BITS_MASK) | + (__force unsigned long)mask; } /* diff --git a/mm/highmem.c b/mm/highmem.c index 90e1861e2da0..ce2e7e8bbfa7 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -30,11 +30,9 @@ static mempool_t *page_pool, *isa_page_pool; -static void *page_pool_alloc(gfp_t gfp_mask, void *data) +static void *page_pool_alloc_isa(gfp_t gfp_mask, void *data) { - unsigned int gfp = gfp_mask | (unsigned int) (long) data; - - return alloc_page(gfp); + return alloc_page(gfp_mask | GFP_DMA); } static void page_pool_free(void *page, void *data) @@ -51,6 +49,12 @@ static void page_pool_free(void *page, void *data) * n means that there are (n-1) current users of it. */ #ifdef CONFIG_HIGHMEM + +static void *page_pool_alloc(gfp_t gfp_mask, void *data) +{ + return alloc_page(gfp_mask); +} + static int pkmap_count[LAST_PKMAP]; static unsigned int last_pkmap_nr; static __cacheline_aligned_in_smp DEFINE_SPINLOCK(kmap_lock); @@ -267,7 +271,7 @@ int init_emergency_isa_pool(void) if (isa_page_pool) return 0; - isa_page_pool = mempool_create(ISA_POOL_SIZE, page_pool_alloc, page_pool_free, (void *) __GFP_DMA); + isa_page_pool = mempool_create(ISA_POOL_SIZE, page_pool_alloc_isa, page_pool_free, NULL); if (!isa_page_pool) BUG(); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index aa43ae3ab8c9..94c864eac9c4 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -734,7 +734,7 @@ buffered_rmqueue(struct zone *zone, int order, gfp_t gfp_flags) * of the allocation. */ int zone_watermark_ok(struct zone *z, int order, unsigned long mark, - int classzone_idx, int can_try_harder, int gfp_high) + int classzone_idx, int can_try_harder, gfp_t gfp_high) { /* free_pages my go negative - that's OK */ long min = mark, free_pages = z->free_pages - (1 << order) + 1; @@ -777,7 +777,7 @@ struct page * fastcall __alloc_pages(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist) { - const int wait = gfp_mask & __GFP_WAIT; + const gfp_t wait = gfp_mask & __GFP_WAIT; struct zone **zones, *z; struct page *page; struct reclaim_state reclaim_state; @@ -996,7 +996,7 @@ fastcall unsigned long get_zeroed_page(gfp_t gfp_mask) * get_zeroed_page() returns a 32-bit address, which cannot represent * a highmem page */ - BUG_ON(gfp_mask & __GFP_HIGHMEM); + BUG_ON((gfp_mask & __GFP_HIGHMEM) != 0); page = alloc_pages(gfp_mask | __GFP_ZERO, 0); if (page) @@ -1428,6 +1428,16 @@ static int __init build_zonelists_node(pg_data_t *pgdat, struct zonelist *zoneli return j; } +static inline int highest_zone(int zone_bits) +{ + int res = ZONE_NORMAL; + if (zone_bits & (__force int)__GFP_HIGHMEM) + res = ZONE_HIGHMEM; + if (zone_bits & (__force int)__GFP_DMA) + res = ZONE_DMA; + return res; +} + #ifdef CONFIG_NUMA #define MAX_NODE_LOAD (num_online_nodes()) static int __initdata node_load[MAX_NUMNODES]; @@ -1524,11 +1534,7 @@ static void __init build_zonelists(pg_data_t *pgdat) zonelist = pgdat->node_zonelists + i; for (j = 0; zonelist->zones[j] != NULL; j++); - k = ZONE_NORMAL; - if (i & __GFP_HIGHMEM) - k = ZONE_HIGHMEM; - if (i & __GFP_DMA) - k = ZONE_DMA; + k = highest_zone(i); j = build_zonelists_node(NODE_DATA(node), zonelist, j, k); zonelist->zones[j] = NULL; @@ -1549,12 +1555,7 @@ static void __init build_zonelists(pg_data_t *pgdat) zonelist = pgdat->node_zonelists + i; j = 0; - k = ZONE_NORMAL; - if (i & __GFP_HIGHMEM) - k = ZONE_HIGHMEM; - if (i & __GFP_DMA) - k = ZONE_DMA; - + k = highest_zone(i); j = build_zonelists_node(pgdat, zonelist, j, k); /* * Now we build the zonelist so that it contains the zones -- GitLab From 0b83f1400fa6e5f0d4afcff033628a16c163862a Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 28 Oct 2005 16:19:37 +0100 Subject: [PATCH 0535/1519] [ARM] 2918/1: [update] Base port of Comdial MP1000 platfrom Patch from Jon Ringle Updated 2898/1 per comments: - Removed fixup - Moved code in mach-mp1000/ to mach-clps711x/ - Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom Please comment. Signed-off-by: Jon Ringle Signed-off-by: Russell King --- arch/arm/Kconfig | 3 +- arch/arm/boot/compressed/head.S | 3 +- arch/arm/configs/mp1000_defconfig | 897 ++++++++++++++++++ arch/arm/mach-clps711x/Kconfig | 11 + arch/arm/mach-clps711x/Makefile | 1 + arch/arm/mach-clps711x/mp1000-mach.c | 49 + arch/arm/mach-clps711x/mp1000-mm.c | 47 + arch/arm/mach-clps711x/mp1000-seprom.c | 195 ++++ drivers/serial/clps711x.c | 9 + include/asm-arm/arch-clps711x/hardware.h | 117 +++ include/asm-arm/arch-clps711x/mp1000-seprom.h | 77 ++ 11 files changed, 1407 insertions(+), 2 deletions(-) create mode 100644 arch/arm/configs/mp1000_defconfig create mode 100644 arch/arm/mach-clps711x/mp1000-mach.c create mode 100644 arch/arm/mach-clps711x/mp1000-mm.c create mode 100644 arch/arm/mach-clps711x/mp1000-seprom.c create mode 100644 include/asm-arm/arch-clps711x/mp1000-seprom.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 11fff042aa81..d885cc48bae1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -687,7 +687,8 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ + || MACH_MP1000 source "drivers/ide/Kconfig" endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7c7f475e213e..a54d2eb64892 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -39,7 +39,8 @@ defined(CONFIG_ARCH_IXP4XX) || \ defined(CONFIG_ARCH_IXP2000) || \ defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) + defined(CONFIG_ARCH_OMAP) || \ + defined(CONFIG_MACH_MP1000) .macro loadsp, rb addruart \rb .endm diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig new file mode 100644 index 000000000000..d2cbc6fada1d --- /dev/null +++ b/arch/arm/configs/mp1000_defconfig @@ -0,0 +1,897 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc1 +# Fri Sep 16 15:48:13 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +CONFIG_ARCH_CLPS711X=y +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# CLPS711X/EP721X Implementations +# +# CONFIG_ARCH_AUTCPU12 is not set +# CONFIG_ARCH_CDB89712 is not set +# CONFIG_ARCH_CEIVA is not set +# CONFIG_ARCH_CLEP7312 is not set +# CONFIG_ARCH_EDB7211 is not set +# CONFIG_ARCH_P720T is not set +# CONFIG_ARCH_FORTUNET is not set +CONFIG_MACH_MP1000=y +CONFIG_MP1000_90MHZ=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM720T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_LV4T=y +CONFIG_CPU_CACHE_V4=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WT=y +CONFIG_CPU_TLB_V4WT=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_SMP is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=m +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=m +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x0000000 +CONFIG_MTD_PHYSMAP_LEN=0x4000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_EDB7312=m +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_MP1000=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +CONFIG_IDE_ARM=y +CONFIG_BLK_DEV_IDE_MP1000=y +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_CS89x0=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CLPS711X=y +CONFIG_SERIAL_CLPS711X_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_NVRAM=y +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_WAITQ=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_CLPS711X_UART2 is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0793dcf54f2e..d5c155045762 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -69,6 +69,17 @@ config EP72XX_ROM_BOOT You almost surely want to say N here. +config MACH_MP1000 + bool "MACH_MP1000" + help + Say Y if you intend to run the kernel on the Comdial MP1000 platform. + +config MP1000_90MHZ + bool "MP1000_90MHZ" + depends on MACH_MP1000 + help + Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ + endmenu endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 4a197315f0cf..8a6dc1ccf8fe 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o +obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o obj-$(CONFIG_ARCH_P720T) += p720t.o leds-$(CONFIG_ARCH_P720T) += p720t-leds.o obj-$(CONFIG_LEDS) += $(leds-y) diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c new file mode 100644 index 000000000000..c2816bcde5e7 --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-mach.c @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/mach-mp1000/mp1000.c + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include + +#include +#include +#include +#include + +#include "common.h" + +extern void mp1000_map_io(void); + +static void __init mp1000_init(void) +{ + seprom_init(); +} + +MACHINE_START(MP1000, "Comdial MP1000") + /* Maintainer: Jon Ringle */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0015100, + .map_io = mp1000_map_io, + .init_irq = clps711x_init_irq, + .init_machine = mp1000_init, + .timer = &clps711x_timer, +MACHINE_END + diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c new file mode 100644 index 000000000000..20e810b0ec0c --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-mm.c @@ -0,0 +1,47 @@ +/* + * linux/arch/arm/mach-mp1000/mm.c + * + * Extra MM routines for the MP1000 + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include + +#include +#include +#include +#include + +#include + +extern void clps711x_map_io(void); + +static struct map_desc mp1000_io_desc[] __initdata = { + { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE }, + { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE }, + { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE }, + { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE }, + { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE }, + { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE } +}; + +void __init mp1000_map_io(void) +{ + clps711x_map_io(); + iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc)); +} diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c new file mode 100644 index 000000000000..b22d0bebb851 --- /dev/null +++ b/arch/arm/mach-clps711x/mp1000-seprom.c @@ -0,0 +1,195 @@ +/*` + * mp1000-seprom.c + * + * This file contains the Serial EEPROM code for the MP1000 board + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include + +/* If SepromInit() can initialize and checksum the seprom successfully, */ +/* then it will point seprom_data_ptr at the shadow copy. */ + +static eeprom_struct seprom_data; /* shadow copy of seprom content */ + +eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */ + +/* + * Port D Bit 5 is Chip Select for EEPROM + * Port E Bit 0 is Input, Data out from EEPROM + * Port E Bit 1 is Output, Data in to EEPROM + * Port E Bit 2 is Output, CLK to EEPROM + */ + +static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR); +static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR); + +#define NO_OF_SHORTS 64 // Device is 64 x 16 bits +#define ENABLE_RW 0 +#define DISABLE_RW 1 + +static inline void toggle_seprom_clock(void) +{ + *port_e_ptr |= HwPortESepromCLK; + *port_e_ptr &= ~(HwPortESepromCLK); +} + +static inline void select_eeprom(void) +{ + *port_d_ptr |= HwPortDEECS; + *port_e_ptr &= ~(HwPortESepromCLK); +} + +static inline void deselect_eeprom(void) +{ + *port_d_ptr &= ~(HwPortDEECS); + *port_e_ptr &= ~(HwPortESepromDIn); +} + +/* + * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom + * and returns 0 if seprom is not initialized or + * has a checksum error. + */ + +eeprom_struct* get_seprom_ptr(void) +{ + return seprom_data_ptr; +} + +unsigned char* get_eeprom_mac_address(void) +{ + return seprom_data_ptr->variant.eprom_struct.mac_Address; +} + +/* + * ReadSProm, Physically reads data from the Serial PROM + */ +static void read_sprom(short address, int length, eeprom_struct *buffer) +{ + short data = COMMAND_READ | (address & 0x3F); + short bit; + int i; + + select_eeprom(); + + // Clock in 9 bits of the command + for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) { + if (data & bit) + *port_e_ptr |= HwPortESepromDIn; + else + *port_e_ptr &= ~(HwPortESepromDIn); + + toggle_seprom_clock(); + } + + // + // Now read one or more shorts of data from the Seprom + // + while (length-- > 0) { + data = 0; + + // Read 16 bits at a time + for (i = 0; i < 16; i++) { + data <<= 1; + toggle_seprom_clock(); + data |= *port_e_ptr & HwPortESepromDOut; + + } + + buffer->variant.eprom_short_data[address++] = data; + } + + deselect_eeprom(); + + return; +} + + + +/* + * ReadSerialPROM + * + * Input: Pointer to array of 64 x 16 Bits + * + * Output: if no problem reading data is filled in + */ +static void read_serial_prom(eeprom_struct *data) +{ + read_sprom(0, 64, data); +} + + +// +// Compute Serial EEPROM checksum +// +// Input: Pointer to struct with Eprom data +// +// Output: The computed Eprom checksum +// +static short compute_seprom_checksum(eeprom_struct *data) +{ + short checksum = 0; + int i; + + for (i = 0; i < 126; i++) { + checksum += (short)data->variant.eprom_byte_data[i]; + } + + return((short)(0x5555 - (checksum & 0xFFFF))); +} + +// +// Make sure the data port bits for the SEPROM are correctly initialised +// + +void __init seprom_init(void) +{ + short checksum; + + // Init Port D + *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0; + *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15; + + // Init Port E + *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06; + *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04; + + // + // Make sure that EEPROM struct size never exceeds 128 bytes + // + if (sizeof(eeprom_struct) > 128) { + panic("Serial PROM struct size > 128, aborting read\n"); + } + + read_serial_prom(&seprom_data); + + checksum = compute_seprom_checksum(&seprom_data); + + if (checksum != seprom_data.variant.eprom_short_data[63]) { + panic("Serial EEPROM checksum failed\n"); + } + + seprom_data_ptr = &seprom_data; +} + diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 87ef368384fb..6a67e8f585b3 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -408,7 +408,11 @@ static struct uart_port clps711x_ports[UART_NR] = { { .iobase = SYSCON1, .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ +#ifdef CONFIG_MP1000_90MHZ + .uartclk = 4515840, +#else .uartclk = 3686400, +#endif .fifosize = 16, .ops = &clps711x_pops, .line = 0, @@ -417,7 +421,11 @@ static struct uart_port clps711x_ports[UART_NR] = { { .iobase = SYSCON2, .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ +#ifdef CONFIG_MP1000_90MHZ + .uartclk = 4515840, +#else .uartclk = 3686400, +#endif .fifosize = 16, .ops = &clps711x_pops, .line = 1, @@ -551,6 +559,7 @@ console_initcall(clps711xuart_console_init); static struct uart_driver clps711x_reg = { .driver_name = "ttyCL", .dev_name = "ttyCL", + .devfs_name = "ttyCL", .major = SERIAL_CLPS711X_MAJOR, .minor = SERIAL_CLPS711X_MINOR, .nr = UART_NR, diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index 1386871e1a5a..f864c367c934 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -235,4 +235,121 @@ #define CEIVA_PB0_BLK_BTN (1<<0) #endif // #if defined (CONFIG_ARCH_CEIVA) +#if defined (CONFIG_MACH_MP1000) +/* NOR FLASH */ +#define MP1000_NIO_BASE 0xf9000000 /* virtual */ +#define MP1000_NIO_START CS0_PHYS_BASE /* physical */ +#define MP1000_NIO_SIZE 0x00400000 + +/* DSP Interface */ +#define MP1000_DSP_BASE 0xfa000000 /* virtual */ +#define MP1000_DSP_START CS1_PHYS_BASE /* physical */ +#define MP1000_DSP_SIZE 0x00100000 + +/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */ +#define MP1000_LIO_BASE 0xfb000000 /* virtual */ +#define MP1000_LIO_START CS2_PHYS_BASE /* physical */ +#define MP1000_LIO_SIZE 0x00100000 + +/* NAND FLASH */ +#define MP1000_FIO_BASE 0xfc000000 /* virtual */ +#define MP1000_FIO_START CS3_PHYS_BASE /* physical */ +#define MP1000_FIO_SIZE 0x00800000 + +/* Ethernet */ +#define MP1000_EIO_BASE 0xfd000000 /* virtual */ +#define MP1000_EIO_START CS4_PHYS_BASE /* physical */ +#define MP1000_EIO_SIZE 0x00100000 + +#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */ +#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/ +#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */ +#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */ + +/* IDE */ +#define MP1000_IDE_BASE 0xfe000000 /* virtual */ +#define MP1000_IDE_START CS5_PHYS_BASE /* physical */ +#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */ + +#define IRQ_HARDDISK IRQ_EINT2 + +/* + * IDE registers definition + */ + +#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000) +#define IDE_BASE_OFF (MP1000_IDE_BASE) + +#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0) +#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2) +#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4) +#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6) +#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8) +#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa) +#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc) +#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe) +#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc) + +#define IDE_IRQ IRQ_EINT2 + + +#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2)) +#define RTC_ALWAYS_BCD 0 + +/* +// Definitions of the bit fields in the HwPortA register for the +// MP1000 board. +*/ +#define HwPortAKeyboardRow1 0x00000001 +#define HwPortAKeyboardRow2 0x00000002 +#define HwPortAKeyboardRow3 0x00000004 +#define HwPortAKeyboardRow4 0x00000008 +#define HwPortAKeyboardRow5 0x00000010 +#define HwPortAKeyboardRow6 0x00000020 +#define HwPortALCDEnable 0x00000040 +#define HwPortAOffhook 0x00000080 + +/* +// Definitions of the bit fields in the HwPortB register for the +// MP1000 board. +*/ +#define HwPortBL3Mode 0x00000001 +#define HwPortBL3Clk 0x00000002 +#define HwPortBSClk 0x00000001 +#define HwPortBSData 0x00000002 +#define HwPortBL3Data 0x00000004 +#define HwPortBMute 0x00000008 +#define HwPortBQD0 0x00000010 +#define HwPortBQD1 0x00000020 +#define HwPortBQD2 0x00000040 +#define HwPortBQD3 0x00000080 + +/* +// Definitions of the bit fields in the HwPortD register for the +// MP1000 board. +*/ +#define HwPortDLED1 0x00000001 +#define HwPortDLED2 0x00000002 +#define HwPortDLED3 0x00000004 +#define HwPortDLED4 0x00000008 +#define HwPortDLED5 0x00000010 +#define HwPortDEECS 0x00000020 +#define HwPortBRTS 0x00000040 +#define HwPortBRI 0x00000080 + + +/* +// Definitions of the bit fields in the HwPortE register for the +// MP1000 board. +*/ + +#define HwPortECLE 0x00000001 +#define HwPortESepromDOut 0x00000001 +#define HwPortEALE 0x00000002 +#define HwPortESepromDIn 0x00000002 +#define HwPortENANDCS 0x00000004 +#define HwPortESepromCLK 0x00000004 + +#endif // #if defined (CONFIG_MACH_MP1000) + #endif diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h new file mode 100644 index 000000000000..3e5566cf9666 --- /dev/null +++ b/include/asm-arm/arch-clps711x/mp1000-seprom.h @@ -0,0 +1,77 @@ +#ifndef MP1000_SEPROM_H +#define MP1000_SEPROM_H + +/* + * mp1000-seprom.h + * + * + * This file contains the Serial EEPROM definitions for the MP1000 board + * + * Copyright (C) 2005 Comdial Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define COMMAND_ERASE (0x1C0) +#define COMMAND_ERASE_ALL (0x120) +#define COMMAND_WRITE_DISABLE (0x100) +#define COMMAND_WRITE_ENABLE (0x130) +#define COMMAND_READ (0x180) +#define COMMAND_WRITE (0x140) +#define COMMAND_WRITE_ALL (0x110) + +// +// Serial EEPROM data format +// + +#define PACKED __attribute__ ((packed)) + +typedef struct _EEPROM { + union { + unsigned char eprom_byte_data[128]; + unsigned short eprom_short_data[64]; + struct { + unsigned char version PACKED; // EEPROM Version "1" for now + unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc) + unsigned char major_hw_version PACKED; // Major Hardware version (Hex) + unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex) + unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic) + unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number + unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD) + unsigned char country PACKED; // Country of deployment + unsigned char mac_Address[6] PACKED; // MAC Address + unsigned char oem_string[20] PACKED; // OEM ID string + unsigned short feature_bits1 PACKED; // Feature Bits 1 + unsigned short feature_bits2 PACKED; // Feature Bits 2 + unsigned char filler[75] PACKED; // Unused/Undefined “0” initialized + unsigned short checksum PACKED; // byte accumulated short checksum + } eprom_struct; + } variant; +} eeprom_struct; + +/* These settings must be mutually exclusive */ +#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */ +#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */ +#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */ + +#define FEATURE_BITS1_CPUIS90MEG 0x0010 + +extern void seprom_init(void); +extern eeprom_struct* get_seprom_ptr(void); +extern unsigned char* get_eeprom_mac_address(void); + +#endif /* MP1000_SEPROM_H */ + -- GitLab From 917f68f8163eb877a6d71c5b446ee236645c2944 Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 28 Oct 2005 16:19:38 +0100 Subject: [PATCH 0536/1519] [ARM] 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000 Patch from Jon Ringle This patch gives support for the CS8900A ethernet chip on the Comdial MP1000 Signed-off-by: Jon Ringle Signed-off-by: Russell King --- drivers/net/Kconfig | 2 +- drivers/net/cs89x0.c | 14 +++++++++++++- drivers/net/cs89x0.h | 2 +- 3 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c748b0e16419..3e1e323e3003 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1330,7 +1330,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 + depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index a6078ad9b654..bfdae10036ed 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -182,6 +182,10 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; +#elif defined(CONFIG_MACH_MP1000) +#include +static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0}; +static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0}; #else static unsigned int netcard_portlist[] __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; @@ -590,6 +594,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) cnt -= j; } } else +#elif defined(CONFIG_MACH_MP1000) + if (1) { + memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN); + } else #endif if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) == @@ -649,6 +657,10 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) if (1) { printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n"); } else +#elif defined(CONFIG_MACH_MP1000) + if (1) { + lp->force |= FORCE_RJ45; + } else #endif if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0) printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n"); @@ -1231,7 +1243,7 @@ net_open(struct net_device *dev) else #endif { -#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) +#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000) if (((1 << dev->irq) & lp->irq_map) == 0) { printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n", dev->name, dev->irq, lp->irq_map); diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h index decea264f121..f19d1ebe0183 100644 --- a/drivers/net/cs89x0.h +++ b/drivers/net/cs89x0.h @@ -16,7 +16,7 @@ #include -#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) +#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000) /* IXDP2401/IXDP2801 uses dword-aligned register addressing */ #define CS89x0_PORT(reg) ((reg) * 2) #else -- GitLab From 80a18573cea2e6d8e95abe4d42bfc5f97761999a Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Fri, 28 Oct 2005 16:25:01 +0100 Subject: [PATCH 0537/1519] [ARM] 2787/2: PXA27x low power modes support Patch from Todd Poynor Add symbols for PXA2xx PWRMODE register M field that selects low-power mode, replace unadorned constants. Honor power mode parameter of pxa_cpu_suspend(mode), no longer force to 3 (sleep). Full Deep Sleep low-power mode support for PXA27x is pending generic PM interfaces to select more than 2 suspend-to-RAM-style power modes, but this is expected soon. This can be hardcoded in the meantime by replacing the pxa_cpu_suspend() parameter value. From David Burrage and Todd Poynor. Try #2 removes one of the register copies and moves the code to save the pxa_cpu_suspend parameter to immediately surround the call that requires the parameter value be preserved. Signed-off-by: Todd Poynor Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/sleep.S | 7 +++++-- arch/arm/mach-pxa/standby.S | 2 +- include/asm-arm/arch-pxa/pxa-regs.h | 7 +++++++ 5 files changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 7869c3b4e62f..573a5758e781 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -129,7 +129,7 @@ void pxa_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); - pxa_cpu_suspend(3); + pxa_cpu_suspend(PWRMODE_SLEEP); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 9a791b07118d..09a5d593f04b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -157,7 +157,7 @@ void pxa_cpu_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); - pxa_cpu_suspend(3); + pxa_cpu_suspend(PWRMODE_SLEEP); break; } } diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 5786ccad938c..c9862688ff3d 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -28,7 +28,9 @@ /* * pxa_cpu_suspend() * - * Forces CPU into sleep state + * Forces CPU into sleep state. + * + * r0 = value for PWRMODE M field for desired sleep state */ ENTRY(pxa_cpu_suspend) @@ -53,6 +55,7 @@ ENTRY(pxa_cpu_suspend) mov r10, sp stmfd sp!, {r3 - r10} + mov r5, r0 @ save sleep mode @ preserve phys address of stack mov r0, sp bl sleep_phys_sp @@ -66,7 +69,7 @@ ENTRY(pxa_cpu_suspend) @ (also workaround for sighting 28071) @ prepare value for sleep mode - mov r1, #3 @ sleep mode + mov r1, r5 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 8a3f27b76784..6f6dbbd08021 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -21,7 +21,7 @@ ENTRY(pxa_cpu_standby) ldr r0, =PSSR mov r1, #(PSSR_PH | PSSR_STS) - mov r2, #2 + mov r2, #PWRMODE_STANDBY mov r3, #UNCACHED_PHYS_0 @ Read mem context in. ldr ip, [r3] b 1f diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 3af7165ab0d7..a6a34edec813 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -2282,4 +2282,11 @@ #endif +/* PWRMODE register M field values */ + +#define PWRMODE_IDLE 0x1 +#define PWRMODE_STANDBY 0x2 +#define PWRMODE_SLEEP 0x3 +#define PWRMODE_DEEPSLEEP 0x7 + #endif -- GitLab From d9e29649875df82828167dd45c802d942db863ba Mon Sep 17 00:00:00 2001 From: Matt Reimer Date: Fri, 28 Oct 2005 16:25:02 +0100 Subject: [PATCH 0538/1519] [ARM] 3029/1: Add HWUART support for PXA 255/26x Patch from Matt Reimer Adds support for HWUART on PXA 255 / 26x. This patch originally came from http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch and has been tweaked by me. Signed-off-by: Matt Reimer Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 18 ++++++++++++++- drivers/serial/pxa.c | 21 ++++++++++++++++- include/asm-arm/arch-pxa/pxa-regs.h | 33 +++++++++++++++++++++++++++ include/asm-arm/arch-pxa/uncompress.h | 1 + 4 files changed, 71 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 719b91e93fa2..218eb9671fa3 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -253,6 +253,10 @@ static struct platform_device stuart_device = { .name = "pxa2xx-uart", .id = 2, }; +static struct platform_device hwuart_device = { + .name = "pxa2xx-uart", + .id = 3, +}; static struct resource i2c_resources[] = { { @@ -310,7 +314,19 @@ static struct platform_device *devices[] __initdata = { static int __init pxa_init(void) { - return platform_add_devices(devices, ARRAY_SIZE(devices)); + int cpuid, ret; + + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (ret) + return ret; + + /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */ + cpuid = read_cpuid(CPUID_ID); + if (((cpuid >> 4) & 0xfff) == 0x2d0 || + ((cpuid >> 4) & 0xfff) == 0x290) + ret = platform_device_register(&hwuart_device); + + return ret; } subsys_initcall(pxa_init); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 90c2a86c421b..005f027e081a 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -358,6 +358,9 @@ static int serial_pxa_startup(struct uart_port *port) unsigned long flags; int retval; + if (port->line == 3) /* HWUART */ + up->mcr |= UART_MCR_AFE; + else up->mcr = 0; /* @@ -481,8 +484,10 @@ serial_pxa_set_termios(struct uart_port *port, struct termios *termios, if ((up->port.uartclk / quot) < (2400 * 16)) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; - else + else if ((up->port.uartclk / quot) < (230400 * 16)) fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; /* * Ok, we're now changing the port state. Do it with @@ -772,6 +777,20 @@ static struct uart_pxa_port serial_pxa_ports[] = { .ops = &serial_pxa_pops, .line = 2, }, + }, { /* HWUART */ + .name = "HWUART", + .cken = CKEN4_HWUART, + .port = { + .type = PORT_PXA, + .iotype = UPIO_MEM, + .membase = (void *)&HWUART, + .mapbase = __PREG(HWUART), + .irq = IRQ_HWUART, + .uartclk = 921600 * 16, + .fifosize = 64, + .ops = &serial_pxa_pops, + .line = 3, + }, } }; diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index a6a34edec813..75f085dc9894 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -326,6 +326,25 @@ #define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ #define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ +/* Hardware UART (HWUART) */ +#define HWUART HWRBR +#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ +#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ +#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ +#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ +#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ +#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ +#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ +#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ +#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ +#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ +#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ +#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ +#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ +#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ +#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + #define IER_DMAE (1 << 7) /* DMA Requests Enable */ #define IER_UUE (1 << 6) /* UART Unit Enable */ #define IER_NRZE (1 << 5) /* NRZ coding Enable */ @@ -1250,9 +1269,13 @@ #define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ #define GPIO41_FFRTS 41 /* FFUART request to send */ #define GPIO42_BTRXD 42 /* BTUART receive data */ +#define GPIO42_HWRXD 42 /* HWUART receive data */ #define GPIO43_BTTXD 43 /* BTUART transmit data */ +#define GPIO43_HWTXD 43 /* HWUART transmit data */ #define GPIO44_BTCTS 44 /* BTUART clear to send */ +#define GPIO44_HWCTS 44 /* HWUART clear to send */ #define GPIO45_BTRTS 45 /* BTUART request to send */ +#define GPIO45_HWRTS 45 /* HWUART request to send */ #define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ #define GPIO46_ICPRXD 46 /* ICP receive data */ #define GPIO46_STRXD 46 /* STD_UART receive data */ @@ -1378,17 +1401,26 @@ #define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) #define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) #define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) +#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) #define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) +#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) #define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) +#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) #define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) #define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) #define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) #define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) #define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) #define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) #define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) #define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) #define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) +#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) #define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) #define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) #define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) @@ -1763,6 +1795,7 @@ #define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ #define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ #define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ +#define CKEN4_HWUART (1 << 4) /* HWUART Unit Clock Enable */ #define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ #define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ #define CKEN3_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */ diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h index 4428d3eb7432..fe38090444e0 100644 --- a/include/asm-arm/arch-pxa/uncompress.h +++ b/include/asm-arm/arch-pxa/uncompress.h @@ -12,6 +12,7 @@ #define FFUART ((volatile unsigned long *)0x40100000) #define BTUART ((volatile unsigned long *)0x40200000) #define STUART ((volatile unsigned long *)0x40700000) +#define HWUART ((volatile unsigned long *)0x41600000) #define UART FFUART -- GitLab From dd5b295ff880d5a0699a52f84106f16702c298f2 Mon Sep 17 00:00:00 2001 From: Jon Ringle Date: Fri, 28 Oct 2005 16:27:24 +0100 Subject: [PATCH 0539/1519] [ARM] 2921/1: Support for the RTC / nvram on the Comdial MP1000 Patch from Jon Ringle This adds support for the RTC and nvram on the Comdial MP1000 Signed-off-by: Jon Ringle Signed-off-by: Russell King --- drivers/char/nvram.c | 110 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 109 insertions(+), 1 deletion(-) diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index 1af733d07321..9e24bbd4090c 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -32,9 +32,11 @@ * added changelog * 1.2 Erik Gilling: Cobalt Networks support * Tim Hockin: general cleanup, Cobalt support + * 1.3 Jon Ringle: Comdial MP1000 support + * */ -#define NVRAM_VERSION "1.2" +#define NVRAM_VERSION "1.3" #include #include @@ -45,6 +47,7 @@ #define PC 1 #define ATARI 2 #define COBALT 3 +#define MP1000 4 /* select machine configuration */ #if defined(CONFIG_ATARI) @@ -54,6 +57,9 @@ # if defined(CONFIG_COBALT) # include # define MACH COBALT +# elif defined(CONFIG_MACH_MP1000) +# undef MACH +# define MACH MP1000 # else # define MACH PC # endif @@ -112,6 +118,23 @@ #endif +#if MACH == MP1000 + +/* RTC in a MP1000 */ +#define CHECK_DRIVER_INIT() 1 + +#define MP1000_CKS_RANGE_START 0 +#define MP1000_CKS_RANGE_END 111 +#define MP1000_CKS_LOC 112 + +#define NVRAM_BYTES (128-NVRAM_FIRST_BYTE) + +#define mach_check_checksum mp1000_check_checksum +#define mach_set_checksum mp1000_set_checksum +#define mach_proc_infos mp1000_proc_infos + +#endif + /* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with * rtc_lock held. Due to the index-port/data-port design of the RTC, we * don't want two different things trying to get to it at once. (e.g. the @@ -915,6 +938,91 @@ atari_proc_infos(unsigned char *nvram, char *buffer, int *len, #endif /* MACH == ATARI */ +#if MACH == MP1000 + +static int +mp1000_check_checksum(void) +{ + int i; + unsigned short sum = 0; + unsigned short expect; + + for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i) + sum += __nvram_read_byte(i); + + expect = __nvram_read_byte(MP1000_CKS_LOC+1)<<8 | + __nvram_read_byte(MP1000_CKS_LOC); + return ((sum & 0xffff) == expect); +} + +static void +mp1000_set_checksum(void) +{ + int i; + unsigned short sum = 0; + + for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i) + sum += __nvram_read_byte(i); + __nvram_write_byte(sum >> 8, MP1000_CKS_LOC + 1); + __nvram_write_byte(sum & 0xff, MP1000_CKS_LOC); +} + +#ifdef CONFIG_PROC_FS + +#define SERVER_N_LEN 32 +#define PATH_N_LEN 32 +#define FILE_N_LEN 32 +#define NVRAM_MAGIC_SIG 0xdead + +typedef struct NvRamImage +{ + unsigned short int magic; + unsigned short int mode; + char fname[FILE_N_LEN]; + char path[PATH_N_LEN]; + char server[SERVER_N_LEN]; + char pad[12]; +} NvRam; + +static int +mp1000_proc_infos(unsigned char *nvram, char *buffer, int *len, + off_t *begin, off_t offset, int size) +{ + int checksum; + NvRam* nv = (NvRam*)nvram; + + spin_lock_irq(&rtc_lock); + checksum = __nvram_check_checksum(); + spin_unlock_irq(&rtc_lock); + + PRINT_PROC("Checksum status: %svalid\n", checksum ? "" : "not "); + + switch( nv->mode ) + { + case 0 : + PRINT_PROC( "\tMode 0, tftp prompt\n" ); + break; + case 1 : + PRINT_PROC( "\tMode 1, booting from disk\n" ); + break; + case 2 : + PRINT_PROC( "\tMode 2, Alternate boot from disk /boot/%s\n", nv->fname ); + break; + case 3 : + PRINT_PROC( "\tMode 3, Booting from net:\n" ); + PRINT_PROC( "\t\t%s:%s%s\n",nv->server, nv->path, nv->fname ); + break; + default: + PRINT_PROC( "\tInconsistant nvram?\n" ); + break; + } + + return 1; +} +#endif + +#endif /* MACH == MP1000 */ + MODULE_LICENSE("GPL"); EXPORT_SYMBOL(__nvram_read_byte); -- GitLab From 8573b80f020dce7aefa3237f1e932d562b65323d Mon Sep 17 00:00:00 2001 From: Erik Hovland Date: Fri, 28 Oct 2005 16:28:04 +0100 Subject: [PATCH 0540/1519] [ARM] 3031/1: fix typos in comments of mmc.h Patch from Erik Hovland I noticed that the same typo (i before c in associated) showed up twice in the file kernel/include/linux/mmc/mmc.h. This patch fixes both of the instances I found with this mistake. The typos are in comments and should have no affect on working code. E Signed-off-by: Erik Hovland Signed-off-by: Russell King --- include/linux/mmc/mmc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 1ab78e8d6c53..aef6042f8f0b 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -50,7 +50,7 @@ struct mmc_command { #define MMC_ERR_INVALID 5 struct mmc_data *data; /* data segment associated with cmd */ - struct mmc_request *mrq; /* assoicated request */ + struct mmc_request *mrq; /* associated request */ }; struct mmc_data { @@ -68,7 +68,7 @@ struct mmc_data { unsigned int bytes_xfered; struct mmc_command *stop; /* stop command */ - struct mmc_request *mrq; /* assoicated request */ + struct mmc_request *mrq; /* associated request */ unsigned int sg_len; /* size of scatter list */ struct scatterlist *sg; /* I/O scatter list */ -- GitLab From a999cb04b4bfb4a2243383f00d5714b8d7163035 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 28 Oct 2005 16:35:46 +0100 Subject: [PATCH 0541/1519] [ARM] 3035/1: RISCOS compat code fix Patch from Nicolas Pitre From: Daniel Jacobowitz > I also fixed a bug that confused me greatly while trying to debug: one > SIGILL has long been a SIGSEGV because of some broken RISCOS > compatibility code. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f6de76e0a45d..baa09601a64e 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -345,7 +345,9 @@ static int bad_syscall(int n, struct pt_regs *regs) struct thread_info *thread = current_thread_info(); siginfo_t info; - if (current->personality != PER_LINUX && thread->exec_domain->handler) { + if (current->personality != PER_LINUX && + current->personality != PER_LINUX_32BIT && + thread->exec_domain->handler) { thread->exec_domain->handler(n, regs); return regs->ARM_r0; } -- GitLab From 6f475c0133eb91c7df3b056843dc33d2824368a2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 28 Oct 2005 16:39:33 +0100 Subject: [PATCH 0542/1519] [ARM] 2897/2: PXA2xx IRDA support Patch from Nicolas Pitre This is the PXA2xx common IRDA driver, plus platform support for Lubbock and Mainstone. Signed-off-by: Nicolas Pitre Acked-by: Jean Tourrilhes Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.c | 18 + arch/arm/mach-pxa/lubbock.c | 20 + arch/arm/mach-pxa/mainstone.c | 25 + drivers/net/irda/Kconfig | 10 + drivers/net/irda/Makefile | 1 + drivers/net/irda/pxaficp_ir.c | 871 ++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/irda.h | 17 + include/asm-arm/arch-pxa/pxa-regs.h | 2 - 8 files changed, 962 insertions(+), 2 deletions(-) create mode 100644 drivers/net/irda/pxaficp_ir.c create mode 100644 include/asm-arm/arch-pxa/irda.h diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 218eb9671fa3..3248bc9b9495 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include "generic.h" @@ -301,6 +302,22 @@ static struct platform_device i2s_device = { .num_resources = ARRAY_SIZE(i2s_resources), }; +static u64 pxaficp_dmamask = ~(u32)0; + +static struct platform_device pxaficp_device = { + .name = "pxa2xx-ir", + .id = -1, + .dev = { + .dma_mask = &pxaficp_dmamask, + .coherent_dma_mask = 0xffffffff, + }, +}; + +void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) +{ + pxaficp_device.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { &pxamci_device, &udc_device, @@ -308,6 +325,7 @@ static struct platform_device *devices[] __initdata = { &ffuart_device, &btuart_device, &stuart_device, + &pxaficp_device, &i2c_device, &i2s_device, }; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 69abc7f61ed0..beccf455f796 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -237,11 +238,30 @@ static struct pxamci_platform_data lubbock_mci_platform_data = { .init = lubbock_mci_init, }; +static void lubbock_irda_transceiver_mode(struct device *dev, int mode) +{ + unsigned long flags; + + local_irq_save(flags); + if (mode & IR_SIRMODE) { + LUB_MISC_WR &= ~(1 << 4); + } else if (mode & IR_FIRMODE) { + LUB_MISC_WR |= 1 << 4; + } + local_irq_restore(flags); +} + +static struct pxaficp_platform_data lubbock_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE, + .transceiver_mode = lubbock_irda_transceiver_mode, +}; + static void __init lubbock_init(void) { pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); + pxa_set_ficp_info(&lubbock_ficp_platform_data); (void) platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 8b4a21623fc0..a48c64026e1f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "generic.h" @@ -294,6 +295,29 @@ static struct pxamci_platform_data mainstone_mci_platform_data = { .exit = mainstone_mci_exit, }; +static void mainstone_irda_transceiver_mode(struct device *dev, int mode) +{ + unsigned long flags; + + local_irq_save(flags); + if (mode & IR_SIRMODE) { + MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR; + } else if (mode & IR_FIRMODE) { + MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR; + } + if (mode & IR_OFF) { + MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF; + } else { + MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL; + } + local_irq_restore(flags); +} + +static struct pxaficp_platform_data mainstone_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = mainstone_irda_transceiver_mode, +}; + static void __init mainstone_init(void) { /* @@ -313,6 +337,7 @@ static void __init mainstone_init(void) set_pxa_fb_info(&toshiba_ltm035a776c); pxa_set_mci_info(&mainstone_mci_platform_data); + pxa_set_ficp_info(&mainstone_ficp_platform_data); } diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index ca5914091d3a..d54156f11e61 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -400,5 +400,15 @@ config VIA_FIR To compile it as a module, choose M here: the module will be called via-ircc. +config PXA_FICP + tristate "Intel PXA2xx Internal FICP" + depends on ARCH_PXA && IRDA + help + Say Y or M here if you want to build support for the PXA2xx + built-in IRDA interface which can support both SIR and FIR. + This driver relies on platform specific helper routines so + available capabilities may vary from one PXA2xx target to + another. + endmenu diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile index 29a8bd812b21..e7a8b7f7f5dd 100644 --- a/drivers/net/irda/Makefile +++ b/drivers/net/irda/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_SMC_IRCC_FIR) += smsc-ircc2.o obj-$(CONFIG_ALI_FIR) += ali-ircc.o obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o obj-$(CONFIG_VIA_FIR) += via-ircc.o +obj-$(CONFIG_PXA_FICP) += pxaficp_ir.o # Old dongle drivers for old SIR drivers obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c new file mode 100644 index 000000000000..aef80f5e7c9c --- /dev/null +++ b/drivers/net/irda/pxaficp_ir.c @@ -0,0 +1,871 @@ +/* + * linux/drivers/net/irda/pxaficp_ir.c + * + * Based on sa1100_ir.c by Russell King + * + * Changes copyright (C) 2003-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Infra-red driver (SIR/FIR) for the PXA2xx embedded microprocessor + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MACH_MAINSTONE +#include +#endif + +#define IrSR_RXPL_NEG_IS_ZERO (1<<4) +#define IrSR_RXPL_POS_IS_ZERO 0x0 +#define IrSR_TXPL_NEG_IS_ZERO (1<<3) +#define IrSR_TXPL_POS_IS_ZERO 0x0 +#define IrSR_XMODE_PULSE_1_6 (1<<2) +#define IrSR_XMODE_PULSE_3_16 0x0 +#define IrSR_RCVEIR_IR_MODE (1<<1) +#define IrSR_RCVEIR_UART_MODE 0x0 +#define IrSR_XMITIR_IR_MODE (1<<0) +#define IrSR_XMITIR_UART_MODE 0x0 + +#define IrSR_IR_RECEIVE_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_IR_MODE | \ + IrSR_XMITIR_UART_MODE) + +#define IrSR_IR_TRANSMIT_ON (\ + IrSR_RXPL_NEG_IS_ZERO | \ + IrSR_TXPL_POS_IS_ZERO | \ + IrSR_XMODE_PULSE_3_16 | \ + IrSR_RCVEIR_UART_MODE | \ + IrSR_XMITIR_IR_MODE) + +struct pxa_irda { + int speed; + int newspeed; + unsigned long last_oscr; + + unsigned char *dma_rx_buff; + unsigned char *dma_tx_buff; + dma_addr_t dma_rx_buff_phy; + dma_addr_t dma_tx_buff_phy; + unsigned int dma_tx_buff_len; + int txdma; + int rxdma; + + struct net_device_stats stats; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct device *dev; + struct pxaficp_platform_data *pdata; +}; + + +#define IS_FIR(si) ((si)->speed >= 4000000) +#define IRDA_FRAME_SIZE_LIMIT 2047 + +inline static void pxa_irda_fir_dma_rx_start(struct pxa_irda *si) +{ + DCSR(si->rxdma) = DCSR_NODESC; + DSADR(si->rxdma) = __PREG(ICDR); + DTADR(si->rxdma) = si->dma_rx_buff_phy; + DCMD(si->rxdma) = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_WIDTH1 | DCMD_BURST32 | IRDA_FRAME_SIZE_LIMIT; + DCSR(si->rxdma) |= DCSR_RUN; +} + +inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si) +{ + DCSR(si->txdma) = DCSR_NODESC; + DSADR(si->txdma) = si->dma_tx_buff_phy; + DTADR(si->txdma) = __PREG(ICDR); + DCMD(si->txdma) = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_ENDIRQEN | DCMD_WIDTH1 | DCMD_BURST32 | si->dma_tx_buff_len; + DCSR(si->txdma) |= DCSR_RUN; +} + +/* + * Set the IrDA communications speed. + */ +static int pxa_irda_set_speed(struct pxa_irda *si, int speed) +{ + unsigned long flags; + unsigned int divisor; + + switch (speed) { + case 9600: case 19200: case 38400: + case 57600: case 115200: + + /* refer to PXA250/210 Developer's Manual 10-7 */ + /* BaudRate = 14.7456 MHz / (16*Divisor) */ + divisor = 14745600 / (16 * speed); + + local_irq_save(flags); + + if (IS_FIR(si)) { + /* stop RX DMA */ + DCSR(si->rxdma) &= ~DCSR_RUN; + /* disable FICP */ + ICCR0 = 0; + pxa_set_cken(CKEN13_FICP, 0); + + /* set board transceiver to SIR mode */ + si->pdata->transceiver_mode(si->dev, IR_SIRMODE); + + /* configure GPIO46/47 */ + pxa_gpio_mode(GPIO46_STRXD_MD); + pxa_gpio_mode(GPIO47_STTXD_MD); + + /* enable the STUART clock */ + pxa_set_cken(CKEN5_STUART, 1); + } + + /* disable STUART first */ + STIER = 0; + + /* access DLL & DLH */ + STLCR |= LCR_DLAB; + STDLL = divisor & 0xff; + STDLH = divisor >> 8; + STLCR &= ~LCR_DLAB; + + si->speed = speed; + STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6; + STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE; + + local_irq_restore(flags); + break; + + case 4000000: + local_irq_save(flags); + + /* disable STUART */ + STIER = 0; + STISR = 0; + pxa_set_cken(CKEN5_STUART, 0); + + /* disable FICP first */ + ICCR0 = 0; + + /* set board transceiver to FIR mode */ + si->pdata->transceiver_mode(si->dev, IR_FIRMODE); + + /* configure GPIO46/47 */ + pxa_gpio_mode(GPIO46_ICPRXD_MD); + pxa_gpio_mode(GPIO47_ICPTXD_MD); + + /* enable the FICP clock */ + pxa_set_cken(CKEN13_FICP, 1); + + si->speed = speed; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + + local_irq_restore(flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* SIR interrupt service routine. */ +static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct pxa_irda *si = netdev_priv(dev); + int iir, lsr, data; + + iir = STIIR; + + switch (iir & 0x0F) { + case 0x06: /* Receiver Line Status */ + lsr = STLSR; + while (lsr & LSR_FIFOE) { + data = STRBR; + if (lsr & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) { + printk(KERN_DEBUG "pxa_ir: sir receiving error\n"); + si->stats.rx_errors++; + if (lsr & LSR_FE) + si->stats.rx_frame_errors++; + if (lsr & LSR_OE) + si->stats.rx_fifo_errors++; + } else { + si->stats.rx_bytes++; + async_unwrap_char(dev, &si->stats, &si->rx_buff, data); + } + lsr = STLSR; + } + dev->last_rx = jiffies; + si->last_oscr = OSCR; + break; + + case 0x04: /* Received Data Available */ + /* forth through */ + + case 0x0C: /* Character Timeout Indication */ + do { + si->stats.rx_bytes++; + async_unwrap_char(dev, &si->stats, &si->rx_buff, STRBR); + } while (STLSR & LSR_DR); + dev->last_rx = jiffies; + si->last_oscr = OSCR; + break; + + case 0x02: /* Transmit FIFO Data Request */ + while ((si->tx_buff.len) && (STLSR & LSR_TDRQ)) { + STTHR = *si->tx_buff.data++; + si->tx_buff.len -= 1; + } + + if (si->tx_buff.len == 0) { + si->stats.tx_packets++; + si->stats.tx_bytes += si->tx_buff.data - + si->tx_buff.head; + + /* We need to ensure that the transmitter has finished. */ + while ((STLSR & LSR_TEMT) == 0) + cpu_relax(); + si->last_oscr = OSCR; + + /* + * Ok, we've finished transmitting. Now enable + * the receiver. Sometimes we get a receive IRQ + * immediately after a transmit... + */ + if (si->newspeed) { + pxa_irda_set_speed(si, si->newspeed); + si->newspeed = 0; + } else { + /* enable IR Receiver, disable IR Transmitter */ + STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6; + /* enable STUART and receive interrupts */ + STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE; + } + /* I'm hungry! */ + netif_wake_queue(dev); + } + break; + } + + return IRQ_HANDLED; +} + +/* FIR Receive DMA interrupt handler */ +static void pxa_irda_fir_dma_rx_irq(int channel, void *data, struct pt_regs *regs) +{ + int dcsr = DCSR(channel); + + DCSR(channel) = dcsr & ~DCSR_RUN; + + printk(KERN_DEBUG "pxa_ir: fir rx dma bus error %#x\n", dcsr); +} + +/* FIR Transmit DMA interrupt handler */ +static void pxa_irda_fir_dma_tx_irq(int channel, void *data, struct pt_regs *regs) +{ + struct net_device *dev = data; + struct pxa_irda *si = netdev_priv(dev); + int dcsr; + + dcsr = DCSR(channel); + DCSR(channel) = dcsr & ~DCSR_RUN; + + if (dcsr & DCSR_ENDINTR) { + si->stats.tx_packets++; + si->stats.tx_bytes += si->dma_tx_buff_len; + } else { + si->stats.tx_errors++; + } + + while (ICSR1 & ICSR1_TBY) + cpu_relax(); + si->last_oscr = OSCR; + + /* + * HACK: It looks like the TBY bit is dropped too soon. + * Without this delay things break. + */ + udelay(120); + + if (si->newspeed) { + pxa_irda_set_speed(si, si->newspeed); + si->newspeed = 0; + } else { + ICCR0 = 0; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + } + netif_wake_queue(dev); +} + +/* EIF(Error in FIFO/End in Frame) handler for FIR */ +static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev) +{ + unsigned int len, stat, data; + + /* Get the current data position. */ + len = DTADR(si->rxdma) - si->dma_rx_buff_phy; + + do { + /* Read Status, and then Data. */ + stat = ICSR1; + rmb(); + data = ICDR; + + if (stat & (ICSR1_CRE | ICSR1_ROR)) { + si->stats.rx_errors++; + if (stat & ICSR1_CRE) { + printk(KERN_DEBUG "pxa_ir: fir receive CRC error\n"); + si->stats.rx_crc_errors++; + } + if (stat & ICSR1_ROR) { + printk(KERN_DEBUG "pxa_ir: fir receive overrun\n"); + si->stats.rx_frame_errors++; + } + } else { + si->dma_rx_buff[len++] = data; + } + /* If we hit the end of frame, there's no point in continuing. */ + if (stat & ICSR1_EOF) + break; + } while (ICSR0 & ICSR0_EIF); + + if (stat & ICSR1_EOF) { + /* end of frame. */ + struct sk_buff *skb = alloc_skb(len+1,GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n"); + si->stats.rx_dropped++; + return; + } + + /* Align IP header to 20 bytes */ + skb_reserve(skb, 1); + memcpy(skb->data, si->dma_rx_buff, len); + skb_put(skb, len); + + /* Feed it to IrLAP */ + skb->dev = dev; + skb->mac.raw = skb->data; + skb->protocol = htons(ETH_P_IRDA); + netif_rx(skb); + + si->stats.rx_packets++; + si->stats.rx_bytes += len; + + dev->last_rx = jiffies; + } +} + +/* FIR interrupt handler */ +static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct pxa_irda *si = netdev_priv(dev); + int icsr0; + + /* stop RX DMA */ + DCSR(si->rxdma) &= ~DCSR_RUN; + si->last_oscr = OSCR; + icsr0 = ICSR0; + + if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) { + if (icsr0 & ICSR0_FRE) { + printk(KERN_DEBUG "pxa_ir: fir receive frame error\n"); + si->stats.rx_frame_errors++; + } else { + printk(KERN_DEBUG "pxa_ir: fir receive abort\n"); + si->stats.rx_errors++; + } + ICSR0 = icsr0 & (ICSR0_FRE | ICSR0_RAB); + } + + if (icsr0 & ICSR0_EIF) { + /* An error in FIFO occured, or there is a end of frame */ + pxa_irda_fir_irq_eif(si, dev); + } + + ICCR0 = 0; + pxa_irda_fir_dma_rx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_RXE; + + return IRQ_HANDLED; +} + +/* hard_xmit interface of irda device */ +static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + int speed = irda_get_next_speed(skb); + + /* + * Does this packet contain a request to change the interface + * speed? If so, remember it until we complete the transmission + * of this frame. + */ + if (speed != si->speed && speed != -1) + si->newspeed = speed; + + /* + * If this is an empty frame, we can bypass a lot. + */ + if (skb->len == 0) { + if (si->newspeed) { + si->newspeed = 0; + pxa_irda_set_speed(si, speed); + } + dev_kfree_skb(skb); + return 0; + } + + netif_stop_queue(dev); + + if (!IS_FIR(si)) { + si->tx_buff.data = si->tx_buff.head; + si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, si->tx_buff.truesize); + + /* Disable STUART interrupts and switch to transmit mode. */ + STIER = 0; + STISR = IrSR_IR_TRANSMIT_ON | IrSR_XMODE_PULSE_1_6; + + /* enable STUART and transmit interrupts */ + STIER = IER_UUE | IER_TIE; + } else { + unsigned long mtt = irda_get_mtt(skb); + + si->dma_tx_buff_len = skb->len; + memcpy(si->dma_tx_buff, skb->data, skb->len); + + if (mtt) + while ((unsigned)(OSCR - si->last_oscr)/4 < mtt) + cpu_relax(); + + /* stop RX DMA, disable FICP */ + DCSR(si->rxdma) &= ~DCSR_RUN; + ICCR0 = 0; + + pxa_irda_fir_dma_tx_start(si); + ICCR0 = ICCR0_ITR | ICCR0_TXE; + } + + dev_kfree_skb(skb); + dev->trans_start = jiffies; + return 0; +} + +static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) +{ + struct if_irda_req *rq = (struct if_irda_req *)ifreq; + struct pxa_irda *si = netdev_priv(dev); + int ret; + + switch (cmd) { + case SIOCSBANDWIDTH: + ret = -EPERM; + if (capable(CAP_NET_ADMIN)) { + /* + * We are unable to set the speed if the + * device is not running. + */ + if (netif_running(dev)) { + ret = pxa_irda_set_speed(si, + rq->ifr_baudrate); + } else { + printk(KERN_INFO "pxa_ir: SIOCSBANDWIDTH: !netif_running\n"); + ret = 0; + } + } + break; + + case SIOCSMEDIABUSY: + ret = -EPERM; + if (capable(CAP_NET_ADMIN)) { + irda_device_set_media_busy(dev, TRUE); + ret = 0; + } + break; + + case SIOCGRECEIVING: + ret = 0; + rq->ifr_receiving = IS_FIR(si) ? 0 + : si->rx_buff.state != OUTSIDE_FRAME; + break; + + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static struct net_device_stats *pxa_irda_stats(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + return &si->stats; +} + +static void pxa_irda_startup(struct pxa_irda *si) +{ + /* Disable STUART interrupts */ + STIER = 0; + /* enable STUART interrupt to the processor */ + STMCR = MCR_OUT2; + /* configure SIR frame format: StartBit - Data 7 ... Data 0 - Stop Bit */ + STLCR = LCR_WLS0 | LCR_WLS1; + /* enable FIFO, we use FIFO to improve performance */ + STFCR = FCR_TRFIFOE | FCR_ITL_32; + + /* disable FICP */ + ICCR0 = 0; + /* configure FICP ICCR2 */ + ICCR2 = ICCR2_TXP | ICCR2_TRIG_32; + + /* configure DMAC */ + DRCMR17 = si->rxdma | DRCMR_MAPVLD; + DRCMR18 = si->txdma | DRCMR_MAPVLD; + + /* force SIR reinitialization */ + si->speed = 4000000; + pxa_irda_set_speed(si, 9600); + + printk(KERN_DEBUG "pxa_ir: irda startup\n"); +} + +static void pxa_irda_shutdown(struct pxa_irda *si) +{ + unsigned long flags; + + local_irq_save(flags); + + /* disable STUART and interrupt */ + STIER = 0; + /* disable STUART SIR mode */ + STISR = 0; + /* disable the STUART clock */ + pxa_set_cken(CKEN5_STUART, 0); + + /* disable DMA */ + DCSR(si->txdma) &= ~DCSR_RUN; + DCSR(si->rxdma) &= ~DCSR_RUN; + /* disable FICP */ + ICCR0 = 0; + /* disable the FICP clock */ + pxa_set_cken(CKEN13_FICP, 0); + + DRCMR17 = 0; + DRCMR18 = 0; + + local_irq_restore(flags); + + /* power off board transceiver */ + si->pdata->transceiver_mode(si->dev, IR_OFF); + + printk(KERN_DEBUG "pxa_ir: irda shutdown\n"); +} + +static int pxa_irda_start(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + int err; + + si->speed = 9600; + + err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev); + if (err) + goto err_irq1; + + err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev); + if (err) + goto err_irq2; + + /* + * The interrupt must remain disabled for now. + */ + disable_irq(IRQ_STUART); + disable_irq(IRQ_ICP); + + err = -EBUSY; + si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev); + if (si->rxdma < 0) + goto err_rx_dma; + + si->txdma = pxa_request_dma("FICP_TX",DMA_PRIO_LOW, pxa_irda_fir_dma_tx_irq, dev); + if (si->txdma < 0) + goto err_tx_dma; + + err = -ENOMEM; + si->dma_rx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, + &si->dma_rx_buff_phy, GFP_KERNEL ); + if (!si->dma_rx_buff) + goto err_dma_rx_buff; + + si->dma_tx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, + &si->dma_tx_buff_phy, GFP_KERNEL ); + if (!si->dma_tx_buff) + goto err_dma_tx_buff; + + /* Setup the serial port for the initial speed. */ + pxa_irda_startup(si); + + /* + * Open a new IrLAP layer instance. + */ + si->irlap = irlap_open(dev, &si->qos, "pxa"); + err = -ENOMEM; + if (!si->irlap) + goto err_irlap; + + /* + * Now enable the interrupt and start the queue + */ + enable_irq(IRQ_STUART); + enable_irq(IRQ_ICP); + netif_start_queue(dev); + + printk(KERN_DEBUG "pxa_ir: irda driver opened\n"); + + return 0; + +err_irlap: + pxa_irda_shutdown(si); + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy); +err_dma_tx_buff: + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy); +err_dma_rx_buff: + pxa_free_dma(si->txdma); +err_tx_dma: + pxa_free_dma(si->rxdma); +err_rx_dma: + free_irq(IRQ_ICP, dev); +err_irq2: + free_irq(IRQ_STUART, dev); +err_irq1: + + return err; +} + +static int pxa_irda_stop(struct net_device *dev) +{ + struct pxa_irda *si = netdev_priv(dev); + + netif_stop_queue(dev); + + pxa_irda_shutdown(si); + + /* Stop IrLAP */ + if (si->irlap) { + irlap_close(si->irlap); + si->irlap = NULL; + } + + free_irq(IRQ_STUART, dev); + free_irq(IRQ_ICP, dev); + + pxa_free_dma(si->rxdma); + pxa_free_dma(si->txdma); + + if (si->dma_rx_buff) + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy); + if (si->dma_tx_buff) + dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy); + + printk(KERN_DEBUG "pxa_ir: irda driver closed\n"); + return 0; +} + +static int pxa_irda_suspend(struct device *_dev, pm_message_t state, u32 level) +{ + struct net_device *dev = dev_get_drvdata(_dev); + struct pxa_irda *si; + + if (!dev || level != SUSPEND_DISABLE) + return 0; + + if (netif_running(dev)) { + si = netdev_priv(dev); + netif_device_detach(dev); + pxa_irda_shutdown(si); + } + + return 0; +} + +static int pxa_irda_resume(struct device *_dev, u32 level) +{ + struct net_device *dev = dev_get_drvdata(_dev); + struct pxa_irda *si; + + if (!dev || level != RESUME_ENABLE) + return 0; + + if (netif_running(dev)) { + si = netdev_priv(dev); + pxa_irda_startup(si); + netif_device_attach(dev); + netif_wake_queue(dev); + } + + return 0; +} + + +static int pxa_irda_init_iobuf(iobuff_t *io, int size) +{ + io->head = kmalloc(size, GFP_KERNEL | GFP_DMA); + if (io->head != NULL) { + io->truesize = size; + io->in_frame = FALSE; + io->state = OUTSIDE_FRAME; + io->data = io->head; + } + return io->head ? 0 : -ENOMEM; +} + +static int pxa_irda_probe(struct device *_dev) +{ + struct platform_device *pdev = to_platform_device(_dev); + struct net_device *dev; + struct pxa_irda *si; + unsigned int baudrate_mask; + int err; + + if (!pdev->dev.platform_data) + return -ENODEV; + + err = request_mem_region(__PREG(STUART), 0x24, "IrDA") ? 0 : -EBUSY; + if (err) + goto err_mem_1; + + err = request_mem_region(__PREG(FICP), 0x1c, "IrDA") ? 0 : -EBUSY; + if (err) + goto err_mem_2; + + dev = alloc_irdadev(sizeof(struct pxa_irda)); + if (!dev) + goto err_mem_3; + + si = netdev_priv(dev); + si->dev = &pdev->dev; + si->pdata = pdev->dev.platform_data; + + /* + * Initialise the SIR buffers + */ + err = pxa_irda_init_iobuf(&si->rx_buff, 14384); + if (err) + goto err_mem_4; + err = pxa_irda_init_iobuf(&si->tx_buff, 4000); + if (err) + goto err_mem_5; + + dev->hard_start_xmit = pxa_irda_hard_xmit; + dev->open = pxa_irda_start; + dev->stop = pxa_irda_stop; + dev->do_ioctl = pxa_irda_ioctl; + dev->get_stats = pxa_irda_stats; + + irda_init_max_qos_capabilies(&si->qos); + + baudrate_mask = 0; + if (si->pdata->transceiver_cap & IR_SIRMODE) + baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; + if (si->pdata->transceiver_cap & IR_FIRMODE) + baudrate_mask |= IR_4000000 << 8; + + si->qos.baud_rate.bits &= baudrate_mask; + si->qos.min_turn_time.bits = 7; /* 1ms or more */ + + irda_qos_bits_to_value(&si->qos); + + err = register_netdev(dev); + + if (err == 0) + dev_set_drvdata(&pdev->dev, dev); + + if (err) { + kfree(si->tx_buff.head); +err_mem_5: + kfree(si->rx_buff.head); +err_mem_4: + free_netdev(dev); +err_mem_3: + release_mem_region(__PREG(FICP), 0x1c); +err_mem_2: + release_mem_region(__PREG(STUART), 0x24); + } +err_mem_1: + return err; +} + +static int pxa_irda_remove(struct device *_dev) +{ + struct net_device *dev = dev_get_drvdata(_dev); + + if (dev) { + struct pxa_irda *si = netdev_priv(dev); + unregister_netdev(dev); + kfree(si->tx_buff.head); + kfree(si->rx_buff.head); + free_netdev(dev); + } + + release_mem_region(__PREG(STUART), 0x24); + release_mem_region(__PREG(FICP), 0x1c); + + return 0; +} + +static struct device_driver pxa_ir_driver = { + .name = "pxa2xx-ir", + .bus = &platform_bus_type, + .probe = pxa_irda_probe, + .remove = pxa_irda_remove, + .suspend = pxa_irda_suspend, + .resume = pxa_irda_resume, +}; + +static int __init pxa_irda_init(void) +{ + return driver_register(&pxa_ir_driver); +} + +static void __exit pxa_irda_exit(void) +{ + driver_unregister(&pxa_ir_driver); +} + +module_init(pxa_irda_init); +module_exit(pxa_irda_exit); + +MODULE_LICENSE("GPL"); diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h new file mode 100644 index 000000000000..748406f384c2 --- /dev/null +++ b/include/asm-arm/arch-pxa/irda.h @@ -0,0 +1,17 @@ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_OFF 1 +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 + +struct pxaficp_platform_data { + int transceiver_cap; + void (*transceiver_mode)(struct device *dev, int mode); +}; + +extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); + +#endif diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 75f085dc9894..a75a2470f4f5 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1032,14 +1032,12 @@ #define ICCR0_LBM (1 << 1) /* Loopback mode */ #define ICCR0_ITR (1 << 0) /* IrDA transmission */ -#ifdef CONFIG_PXA27x #define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ #define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ #define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ #define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ #define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ #define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ -#endif #ifdef CONFIG_PXA27x #define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ -- GitLab From 13b1d677d2c872e2d05ef6241b499b6e1f6f91ba Mon Sep 17 00:00:00 2001 From: Bellido Nicolas Date: Fri, 28 Oct 2005 16:51:40 +0100 Subject: [PATCH 0543/1519] [ARM] 3036/1: AAEC-2000 - Add defines for GPIO registers Patch from Bellido Nicolas Add defines for GPIO registers on the AAEC-2000 processor. Signed-off-by: Nicolas Bellido Signed-off-by: Russell King --- include/asm-arm/arch-aaec2000/aaec2000.h | 50 ++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h index 0e9b7e18af05..7472f9e5523f 100644 --- a/include/asm-arm/arch-aaec2000/aaec2000.h +++ b/include/asm-arm/arch-aaec2000/aaec2000.h @@ -17,6 +17,13 @@ #error You must include hardware.h not this file #endif /* __ASM_ARCH_HARDWARE_H */ +/* Chip selects */ +#define AAEC_CS0 0x00000000 +#define AAEC_CS1 0x10000000 +#define AAEC_CS2 0x20000000 +#define AAEC_CS3 0x30000000 + + /* Interrupt controller */ #define IRQ_BASE __REG(0x80000500) #define IRQ_INTSR __REG(0x80000500) /* Int Status Register */ @@ -148,4 +155,47 @@ #define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */ #define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */ +/* GPIO Registers */ +#define AAEC_GPIO_PHYS 0x80000e00 + +#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00) +#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04) +#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08) +#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c) +#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10) +#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14) +#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18) +#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c) +#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20) +#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24) +#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28) +#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c) +#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30) +#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34) +#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38) +#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c) +#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40) +#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44) +#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48) +#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c) +#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50) +#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54) +#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58) +#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c) +#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60) +#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64) +#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68) +#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c) +#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70) +#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74) +#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78) +#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c) +#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80) +#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84) + +#define AAEC_GPIO_PINMUX_PE0CON (1 << 0) +#define AAEC_GPIO_PINMUX_PD0CON (1 << 1) +#define AAEC_GPIO_PINMUX_CODECON (1 << 2) +#define AAEC_GPIO_PINMUX_UART3CON (1 << 3) + #endif /* __ARM_ARCH_AAEC2000_H */ -- GitLab From 4028ef4cc1fea245906a2dbd4df1ac9f0353ef5f Mon Sep 17 00:00:00 2001 From: Bellido Nicolas Date: Fri, 28 Oct 2005 16:51:40 +0100 Subject: [PATCH 0544/1519] [ARM] 3037/1: AAED-2000 - Add defines for GPIO registers on external port. Patch from Bellido Nicolas The AAED-2000 board has GPIO pins on an external port. This patch adds the defines, and do the necessary mapping. Signed-off-by: Nicolas Bellido Signed-off-by: Russell King --- arch/arm/mach-aaec2000/aaed2000.c | 7 +++++ include/asm-arm/arch-aaec2000/aaed2000.h | 40 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+) create mode 100644 include/asm-arm/arch-aaec2000/aaed2000.h diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index c9d899886648..7b0a1c7d64a9 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -27,6 +27,8 @@ #include #include +#include + #include "core.h" static void __init aaed2000_init_irq(void) @@ -34,9 +36,14 @@ static void __init aaed2000_init_irq(void) aaec2000_init_irq(); } +static struct map_desc aaed2000_io_desc[] __initdata = { + { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */ +}; + static void __init aaed2000_map_io(void) { aaec2000_map_io(); + iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc)); } MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h new file mode 100644 index 000000000000..bc76d2badb91 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/aaed2000.h @@ -0,0 +1,40 @@ +/* + * linux/include/asm-arm/arch-aaec2000/aaed2000.h + * + * AAED-2000 specific bits definition + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_AAED2000_H +#define __ASM_ARCH_AAED2000_H + +/* External GPIOs. */ + +#define EXT_GPIO_PBASE AAEC_CS3 +#define EXT_GPIO_VBASE 0xf8100000 +#define EXT_GPIO_LENGTH 0x00001000 + +#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE) +#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE) + +#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x))) +#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x))) + +#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE) + +#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */ +#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */ +#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */ +#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */ +#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */ +#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */ +#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */ +#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */ + + +#endif /* __ARM_ARCH_AAED2000_H */ -- GitLab From f0904e29369a940080487fece700e59295196d79 Mon Sep 17 00:00:00 2001 From: Bellido Nicolas Date: Fri, 28 Oct 2005 16:51:41 +0100 Subject: [PATCH 0545/1519] [ARM] 3038/1: AAEC-2000 - Proper includes in hardware.h Patch from Bellido Nicolas linux/config.h is not necessary in hardware.h, while asm/sizes.h and asm/arch//aaec2000.h will be used later. Signed-off-by: Nicolas Bellido Signed-off-by: Russell King --- include/asm-arm/arch-aaec2000/hardware.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h index 4c37219e030e..153506fd06ed 100644 --- a/include/asm-arm/arch-aaec2000/hardware.h +++ b/include/asm-arm/arch-aaec2000/hardware.h @@ -11,7 +11,8 @@ #ifndef __ASM_ARCH_HARDWARE_H #define __ASM_ARCH_HARDWARE_H -#include +#include +#include /* The kernel is loaded at physical address 0xf8000000. * We map the IO space a bit after -- GitLab From 4a91ca2eb6eff14bb23f709e6ebf189fdbcdaa22 Mon Sep 17 00:00:00 2001 From: Bellido Nicolas Date: Fri, 28 Oct 2005 16:51:42 +0100 Subject: [PATCH 0546/1519] [ARM] 3039/1: AAEC-2000 - Add MTD support Patch from Bellido Nicolas This adds platform code for MTD devices on AAEC-2000. Signed-off-by: Nicolas Bellido Signed-off-by: Russell King --- arch/arm/mach-aaec2000/core.c | 31 ++++++++++++++++++++++++ include/asm-arm/arch-aaec2000/aaec2000.h | 3 +++ 2 files changed, 34 insertions(+) diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index 9be6c3213254..86c5149b1721 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -22,6 +23,7 @@ #include #include +#include #include #include #include @@ -163,3 +165,32 @@ struct sys_timer aaec2000_timer = { .offset = aaec2000_gettimeoffset, }; +static struct flash_platform_data aaec2000_flash_data = { + .map_name = "cfi_probe", + .width = 4, +}; + +static struct resource aaec2000_flash_resource = { + .start = AAEC_FLASH_BASE, + .end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device aaec2000_flash_device = { + .name = "armflash", + .id = 0, + .dev = { + .platform_data = &aaec2000_flash_data, + }, + .num_resources = 1, + .resource = &aaec2000_flash_resource, +}; + +static int __init aaec2000_init(void) +{ + platform_device_register(&aaec2000_flash_device); + + return 0; +}; +arch_initcall(aaec2000_init); + diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h index 7472f9e5523f..dfb09389ebc1 100644 --- a/include/asm-arm/arch-aaec2000/aaec2000.h +++ b/include/asm-arm/arch-aaec2000/aaec2000.h @@ -23,6 +23,9 @@ #define AAEC_CS2 0x20000000 #define AAEC_CS3 0x30000000 +/* Flash */ +#define AAEC_FLASH_BASE AAEC_CS0 +#define AAEC_FLASH_SIZE SZ_64M /* Interrupt controller */ #define IRQ_BASE __REG(0x80000500) -- GitLab From 4224b67c9a1d6cbf47b073970bd2db5a89557f92 Mon Sep 17 00:00:00 2001 From: Bellido Nicolas Date: Fri, 28 Oct 2005 16:51:43 +0100 Subject: [PATCH 0547/1519] [ARM] 3040/1: AAEC-2000 - Preliminary clock interface support Patch from Bellido Nicolas Here is a preliminary clock interface support for the AAEC-2000. Signed-off-by: Nicolas Bellido Signed-off-by: Russell King --- arch/arm/mach-aaec2000/Makefile | 2 +- arch/arm/mach-aaec2000/clock.c | 110 ++++++++++++++++++++++++++++++++ arch/arm/mach-aaec2000/clock.h | 23 +++++++ 3 files changed, 134 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-aaec2000/clock.c create mode 100644 arch/arm/mach-aaec2000/clock.h diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile index 20ec83896c37..a8e462f58bc9 100644 --- a/arch/arm/mach-aaec2000/Makefile +++ b/arch/arm/mach-aaec2000/Makefile @@ -3,7 +3,7 @@ # # Common support (must be linked before board specific support) -obj-y += core.o +obj-y += core.o clock.o # Specific board support obj-$(CONFIG_MACH_AAED2000) += aaed2000.o diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c new file mode 100644 index 000000000000..99e019169dda --- /dev/null +++ b/arch/arm/mach-aaec2000/clock.c @@ -0,0 +1,110 @@ +/* + * linux/arch/arm/mach-aaec2000/clock.c + * + * Copyright (C) 2005 Nicolas Bellido Y Ortega + * + * Based on linux/arch/arm/mach-integrator/clock.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include + +#include "clock.h" + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +int clk_use(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_use); + +void clk_unuse(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_unuse); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-aaec2000/clock.h b/arch/arm/mach-aaec2000/clock.h new file mode 100644 index 000000000000..d4bb74ff613f --- /dev/null +++ b/arch/arm/mach-aaec2000/clock.h @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-aaec2000/clock.h + * + * Copyright (C) 2005 Nicolas Bellido Y Ortega + * + * Based on linux/arch/arm/mach-integrator/clock.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +struct module; + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + void *data; +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); -- GitLab From 049eb3298a832a63c55bc8d8ea4cc881ab99f84b Mon Sep 17 00:00:00 2001 From: Bellido Nicolas Date: Fri, 28 Oct 2005 16:51:44 +0100 Subject: [PATCH 0548/1519] [ARM] 3041/1: AAEC-2000 - CLCD controller platform glue Patch from Bellido Nicolas The AAEC-2000 has an ARM PrimeCell PL110 Color LCD Controller. This patch contains the platform glue that will be used by specific boards. Signed-off-by: Nicolas Bellido Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-aaec2000/core.c | 90 ++++++++++++++++++++++++ arch/arm/mach-aaec2000/core.h | 11 +++ include/asm-arm/arch-aaec2000/aaec2000.h | 3 + 4 files changed, 105 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d885cc48bae1..682367bd0f65 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -204,6 +204,7 @@ config ARCH_H720X config ARCH_AAEC2000 bool "Agilent AAEC-2000 based" + select ARM_AMBA help This enables support for systems based on the Agilent AAEC-2000 diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index 86c5149b1721..0c53dab80905 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -16,18 +16,24 @@ #include #include #include +#include #include #include #include #include #include +#include +#include #include #include #include #include +#include "core.h" +#include "clock.h" + /* * Common I/O mapping: * @@ -165,6 +171,81 @@ struct sys_timer aaec2000_timer = { .offset = aaec2000_gettimeoffset, }; +static struct clcd_panel mach_clcd_panel; + +static int aaec2000_clcd_setup(struct clcd_fb *fb) +{ + dma_addr_t dma; + + fb->panel = &mach_clcd_panel; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M, + &dma, GFP_KERNEL); + + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = SZ_1M; + + return 0; +} + +static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +static void aaec2000_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +static struct clcd_board clcd_plat_data = { + .name = "AAEC-2000", + .check = clcdfb_check, + .decode = clcdfb_decode, + .setup = aaec2000_clcd_setup, + .mmap = aaec2000_clcd_mmap, + .remove = aaec2000_clcd_remove, +}; + +static struct amba_device clcd_device = { + .dev = { + .bus_id = "mb:16", + .coherent_dma_mask = ~0, + .platform_data = &clcd_plat_data, + }, + .res = { + .start = AAEC_CLCD_PHYS, + .end = AAEC_CLCD_PHYS + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { INT_LCD, NO_IRQ }, + .periphid = 0x41110, +}; + +static struct amba_device *amba_devs[] __initdata = { + &clcd_device, +}; + +static struct clk aaec2000_clcd_clk = { + .name = "CLCDCLK", +}; + +void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd) +{ + clcd_plat_data.enable = clcd->enable; + clcd_plat_data.disable = clcd->disable; + memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel)); +} + static struct flash_platform_data aaec2000_flash_data = { .map_name = "cfi_probe", .width = 4, @@ -188,6 +269,15 @@ static struct platform_device aaec2000_flash_device = { static int __init aaec2000_init(void) { + int i; + + clk_register(&aaec2000_clcd_clk); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + platform_device_register(&aaec2000_flash_device); return 0; diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h index 91893d848c16..daefc0ea14a1 100644 --- a/arch/arm/mach-aaec2000/core.h +++ b/arch/arm/mach-aaec2000/core.h @@ -9,8 +9,19 @@ * */ +#include + struct sys_timer; extern struct sys_timer aaec2000_timer; extern void __init aaec2000_map_io(void); extern void __init aaec2000_init_irq(void); + +struct aaec2000_clcd_info { + struct clcd_panel panel; + void (*disable)(struct clcd_fb *); + void (*enable)(struct clcd_fb *); +}; + +extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *); + diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h index dfb09389ebc1..002227924b9f 100644 --- a/include/asm-arm/arch-aaec2000/aaec2000.h +++ b/include/asm-arm/arch-aaec2000/aaec2000.h @@ -201,4 +201,7 @@ #define AAEC_GPIO_PINMUX_CODECON (1 << 2) #define AAEC_GPIO_PINMUX_UART3CON (1 << 3) +/* LCD Controller */ +#define AAEC_CLCD_PHYS 0x80003000 + #endif /* __ARM_ARCH_AAEC2000_H */ -- GitLab From 50f4c001bc1534db77663592496204ceba151e97 Mon Sep 17 00:00:00 2001 From: Bellido Nicolas Date: Fri, 28 Oct 2005 16:51:44 +0100 Subject: [PATCH 0549/1519] [ARM] 3042/1: AAED-2000 - LCD panel informations Patch from Bellido Nicolas The AAED-2000 is equiped with an 640x480 LCD. This adds the parameters that will be passed to the AAEC-2000 platform code. Signed-off-by: Nicolas Bellido Signed-off-by: Russell King --- arch/arm/mach-aaec2000/aaed2000.c | 43 +++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 7b0a1c7d64a9..f5ef69702296 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -31,11 +31,53 @@ #include "core.h" +static void aaed2000_clcd_disable(struct clcd_fb *fb) +{ + AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN; +} + +static void aaed2000_clcd_enable(struct clcd_fb *fb) +{ + AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN; +} + +struct aaec2000_clcd_info clcd_info = { + .enable = aaed2000_clcd_enable, + .disable = aaed2000_clcd_disable, + .panel = { + .mode = { + .name = "Sharp", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 20, + .right_margin = 44, + .upper_margin = 21, + .lower_margin = 34, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS, + .cntl = CNTL_LCDTFT, + .bpp = 16, + }, +}; + static void __init aaed2000_init_irq(void) { aaec2000_init_irq(); } +static void __init aaed2000_init(void) +{ + aaec2000_set_clcd_plat_data(&clcd_info); +} + static struct map_desc aaed2000_io_desc[] __initdata = { { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */ }; @@ -54,4 +96,5 @@ MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") .map_io = aaed2000_map_io, .init_irq = aaed2000_init_irq, .timer = &aaec2000_timer, + .init_machine = aaed2000_init, MACHINE_END -- GitLab From 475172fb18853c31c24a8519b06a3bd5712b2cfe Mon Sep 17 00:00:00 2001 From: "Ed L. Cashin" Date: Thu, 29 Sep 2005 12:47:40 -0400 Subject: [PATCH 0550/1519] [PATCH] aoe: use get_unaligned for accesses in ATA id buffer Signed-off-by: "Ed L. Cashin" Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman Use get_unaligned for possibly-unaligned multi-byte accesses to the ATA device identify response buffer. --- drivers/block/aoe/aoecmd.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index b5be4b7d7b5b..5c9c7c1a3d4c 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -8,6 +8,7 @@ #include #include #include +#include #include "aoe.h" #define TIMERTICK (HZ / 10) @@ -311,16 +312,16 @@ ataid_complete(struct aoedev *d, unsigned char *id) u16 n; /* word 83: command set supported */ - n = le16_to_cpup((__le16 *) &id[83<<1]); + n = le16_to_cpu(get_unaligned((__le16 *) &id[83<<1])); /* word 86: command set/feature enabled */ - n |= le16_to_cpup((__le16 *) &id[86<<1]); + n |= le16_to_cpu(get_unaligned((__le16 *) &id[86<<1])); if (n & (1<<10)) { /* bit 10: LBA 48 */ d->flags |= DEVFL_EXT; /* word 100: number lba48 sectors */ - ssize = le64_to_cpup((__le64 *) &id[100<<1]); + ssize = le64_to_cpu(get_unaligned((__le64 *) &id[100<<1])); /* set as in ide-disk.c:init_idedisk_capacity */ d->geo.cylinders = ssize; @@ -331,12 +332,12 @@ ataid_complete(struct aoedev *d, unsigned char *id) d->flags &= ~DEVFL_EXT; /* number lba28 sectors */ - ssize = le32_to_cpup((__le32 *) &id[60<<1]); + ssize = le32_to_cpu(get_unaligned((__le32 *) &id[60<<1])); /* NOTE: obsolete in ATA 6 */ - d->geo.cylinders = le16_to_cpup((__le16 *) &id[54<<1]); - d->geo.heads = le16_to_cpup((__le16 *) &id[55<<1]); - d->geo.sectors = le16_to_cpup((__le16 *) &id[56<<1]); + d->geo.cylinders = le16_to_cpu(get_unaligned((__le16 *) &id[54<<1])); + d->geo.heads = le16_to_cpu(get_unaligned((__le16 *) &id[55<<1])); + d->geo.sectors = le16_to_cpu(get_unaligned((__le16 *) &id[56<<1])); } d->ssize = ssize; d->geo.start = 0; -- GitLab From 3dc7c555636e46bb64b4da3570a345f4b247eaf0 Mon Sep 17 00:00:00 2001 From: "Ed L. Cashin" Date: Thu, 29 Sep 2005 12:47:55 -0400 Subject: [PATCH 0551/1519] [PATCH] aoe: update to version 14 Signed-off-by: "Ed L. Cashin" Signed-off-by: Greg Kroah-Hartman Update driver version number to 14. --- drivers/block/aoe/aoe.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h index 0e9e586e9ba3..881c48d941b7 100644 --- a/drivers/block/aoe/aoe.h +++ b/drivers/block/aoe/aoe.h @@ -1,5 +1,5 @@ /* Copyright (c) 2004 Coraid, Inc. See COPYING for GPL terms. */ -#define VERSION "12" +#define VERSION "14" #define AOE_MAJOR 152 #define DEVICE_NAME "aoe" -- GitLab From d5dee80ad69439ad8dccf8fa4d7fed0068aec9cf Mon Sep 17 00:00:00 2001 From: Will Dyson Date: Fri, 16 Sep 2005 02:55:07 -0700 Subject: [PATCH 0552/1519] [PATCH] add sysfs support for ide tape I was recently given an old Travan tape drive and asked to do something useful with it. The ide-scsi + st (+serverworks ide controller) combo results in a hard lockup of the machine which I have not had the energy to debug, so I turned to ide-tape (which seems to work). The system in question debian stable, using udev to manage /dev. The following patch to ide-tape.c allows udev to create the cdev nodes for my drive. Cc: Gadi Oxman Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/ide/ide-tape.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index ee38e6b143a4..95abe981530d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1013,6 +1013,8 @@ typedef struct ide_tape_obj { static DECLARE_MUTEX(idetape_ref_sem); +static struct class *idetape_sysfs_class; + #define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref) #define ide_tape_g(disk) \ @@ -4704,6 +4706,10 @@ static void ide_tape_release(struct kref *kref) drive->dsc_overlap = 0; drive->driver_data = NULL; + class_device_destroy(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, tape->minor)); + class_device_destroy(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, tape->minor + 128)); devfs_remove("%s/mt", drive->devfs_name); devfs_remove("%s/mtn", drive->devfs_name); devfs_unregister_tape(g->number); @@ -4878,6 +4884,11 @@ static int ide_tape_probe(struct device *dev) idetape_setup(drive, tape, minor); + class_device_create(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, minor), dev, "%s", tape->name); + class_device_create(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, minor + 128), dev, "n%s", tape->name); + devfs_mk_cdev(MKDEV(HWIF(drive)->major, minor), S_IFCHR | S_IRUGO | S_IWUGO, "%s/mt", drive->devfs_name); @@ -4903,6 +4914,7 @@ MODULE_LICENSE("GPL"); static void __exit idetape_exit (void) { driver_unregister(&idetape_driver.gen_driver); + class_destroy(idetape_sysfs_class); unregister_chrdev(IDETAPE_MAJOR, "ht"); } @@ -4911,11 +4923,33 @@ static void __exit idetape_exit (void) */ static int idetape_init (void) { + int error = 1; + idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape"); + if (IS_ERR(idetape_sysfs_class)) { + idetape_sysfs_class = NULL; + printk(KERN_ERR "Unable to create sysfs class for ide tapes\n"); + error = -EBUSY; + goto out; + } + if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) { printk(KERN_ERR "ide-tape: Failed to register character device interface\n"); - return -EBUSY; + error = -EBUSY; + goto out_free_class; } - return driver_register(&idetape_driver.gen_driver); + + error = driver_register(&idetape_driver.gen_driver); + if (error) + goto out_free_driver; + + return 0; + +out_free_driver: + driver_unregister(&idetape_driver.gen_driver); +out_free_class: + class_destroy(idetape_sysfs_class); +out: + return error; } module_init(idetape_init); -- GitLab From 4ed17dccd69c4fc13b9d2118001f5e58ea16ebea Mon Sep 17 00:00:00 2001 From: Erik Hovland Date: Thu, 6 Oct 2005 10:45:30 -0700 Subject: [PATCH 0553/1519] [PATCH] kobject_uevent.c has a typo in a comment This patch changes trough to through in a comment in kobject_uevent.c. Signed-off-by: Greg Kroah-Hartman --- lib/kobject_uevent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 04ca4429ddfa..a318330d254a 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -54,7 +54,7 @@ static char *action_to_string(enum kobject_action action) static struct sock *uevent_sock; /** - * send_uevent - notify userspace by sending event trough netlink socket + * send_uevent - notify userspace by sending event through netlink socket * * @signal: signal name * @obj: object path (kobject) -- GitLab From 2a7ff1feda9f5cd6463744239ec5e661ee7d5f01 Mon Sep 17 00:00:00 2001 From: Erik Hovland Date: Thu, 6 Oct 2005 10:47:49 -0700 Subject: [PATCH 0554/1519] [PATCH] changes device to driver in porting.txt The document porting.txt in Documentation/driver-model says: When a device is successfully bound to a device I think it should say: When a device is successfully bound to a driver Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/porting.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/driver-model/porting.txt b/Documentation/driver-model/porting.txt index ff2fef2107f0..98b233cb8b36 100644 --- a/Documentation/driver-model/porting.txt +++ b/Documentation/driver-model/porting.txt @@ -350,7 +350,7 @@ When a driver is registered, the bus's list of devices is iterated over. bus->match() is called for each device that is not already claimed by a driver. -When a device is successfully bound to a device, device->driver is +When a device is successfully bound to a driver, device->driver is set, the device is added to a per-driver list of devices, and a symlink is created in the driver's sysfs directory that points to the device's physical directory: -- GitLab From 0ac85241ebc7bf6b86ab498960cc121d53ef69ae Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 12 Sep 2005 19:39:34 -0700 Subject: [PATCH 0555/1519] [PATCH] driver model wakeup flags This is a refresh of an earlier patch to add "wakeup" support to the PM core model. This provides per-device bus-neutral control of the use of wakeup events. * "struct device_pm_info" has two bits that are initialized as part of setting up the enclosing struct device: - "can_wakeup", reflecting hardware capabilities - "may_wakeup", the policy setting (when CONFIG_PM) * There's a writeable sysfs "wakeup" file, with one of two values: - "enabled", when the policy is to allow wakeup - "disabled", when the policy is not to allow it - "" if the device can't currently issue wakeups By default, wakeup is enabled on all devices that support it. If its driver doesn't support it ... treat it as a bug. :) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 1 + drivers/base/power/sysfs.c | 73 ++++++++++++++++++++++++++++++++++++++ include/linux/pm.h | 26 +++++++++++++- 3 files changed, 99 insertions(+), 1 deletion(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 6ab73f5c799a..31109193e2c4 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -225,6 +225,7 @@ void device_initialize(struct device *dev) klist_children_put); INIT_LIST_HEAD(&dev->dma_pools); init_MUTEX(&dev->sem); + device_init_wakeup(dev, 0); } /** diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index 8d04fb435c17..89c57875f3e5 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -48,8 +48,81 @@ static ssize_t state_store(struct device * dev, struct device_attribute *attr, c static DEVICE_ATTR(state, 0644, state_show, state_store); +/* + * wakeup - Report/change current wakeup option for device + * + * Some devices support "wakeup" events, which are hardware signals + * used to activate devices from suspended or low power states. Such + * devices have one of three values for the sysfs power/wakeup file: + * + * + "enabled\n" to issue the events; + * + "disabled\n" not to do so; or + * + "\n" for temporary or permanent inability to issue wakeup. + * + * (For example, unconfigured USB devices can't issue wakeups.) + * + * Familiar examples of devices that can issue wakeup events include + * keyboards and mice (both PS2 and USB styles), power buttons, modems, + * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events + * will wake the entire system from a suspend state; others may just + * wake up the device (if the system as a whole is already active). + * Some wakeup events use normal IRQ lines; other use special out + * of band signaling. + * + * It is the responsibility of device drivers to enable (or disable) + * wakeup signaling as part of changing device power states, respecting + * the policy choices provided through the driver model. + * + * Devices may not be able to generate wakeup events from all power + * states. Also, the events may be ignored in some configurations; + * for example, they might need help from other devices that aren't + * active, or which may have wakeup disabled. Some drivers rely on + * wakeup events internally (unless they are disabled), keeping + * their hardware in low power modes whenever they're unused. This + * saves runtime power, without requiring system-wide sleep states. + */ + +static const char enabled[] = "enabled"; +static const char disabled[] = "disabled"; + +static ssize_t +wake_show(struct device * dev, struct device_attribute *attr, char * buf) +{ + return sprintf(buf, "%s\n", device_can_wakeup(dev) + ? (device_may_wakeup(dev) ? enabled : disabled) + : ""); +} + +static ssize_t +wake_store(struct device * dev, struct device_attribute *attr, + const char * buf, size_t n) +{ + char *cp; + int len = n; + + if (!device_can_wakeup(dev)) + return -EINVAL; + + cp = memchr(buf, '\n', n); + if (cp) + len = cp - buf; + if (len == sizeof enabled - 1 + && strncmp(buf, enabled, sizeof enabled - 1) == 0) + device_set_wakeup_enable(dev, 1); + else if (len == sizeof disabled - 1 + && strncmp(buf, disabled, sizeof disabled - 1) == 0) + device_set_wakeup_enable(dev, 0); + else + return -EINVAL; + return n; +} + +static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store); + + static struct attribute * power_attrs[] = { &dev_attr_state.attr, + &dev_attr_wakeup.attr, NULL, }; static struct attribute_group pm_attr_group = { diff --git a/include/linux/pm.h b/include/linux/pm.h index 5cfb07648eca..7897cf500c51 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -219,7 +219,9 @@ typedef struct pm_message { struct dev_pm_info { pm_message_t power_state; + unsigned can_wakeup:1; #ifdef CONFIG_PM + unsigned should_wakeup:1; pm_message_t prev_state; void * saved_state; atomic_t pm_users; @@ -236,13 +238,35 @@ extern void device_resume(void); #ifdef CONFIG_PM extern int device_suspend(pm_message_t state); -#else + +#define device_set_wakeup_enable(dev,val) \ + ((dev)->power.should_wakeup = !!(val)) +#define device_may_wakeup(dev) \ + (device_can_wakeup(dev) && (dev)->power.should_wakeup) + +#else /* !CONFIG_PM */ + static inline int device_suspend(pm_message_t state) { return 0; } + +#define device_set_wakeup_enable(dev,val) do{}while(0) +#define device_may_wakeup(dev) (0) + #endif +/* changes to device_may_wakeup take effect on the next pm state change. + * by default, devices should wakeup if they can. + */ +#define device_can_wakeup(dev) \ + ((dev)->power.can_wakeup) +#define device_init_wakeup(dev,val) \ + do { \ + device_can_wakeup(dev) = !!(val); \ + device_set_wakeup_enable(dev,val); \ + } while(0) + #endif /* __KERNEL__ */ #endif /* _LINUX_PM_H */ -- GitLab From b94dc6b58667a73eeaf5cfd9c9e90dcd98743c5b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 12 Sep 2005 19:39:39 -0700 Subject: [PATCH 0556/1519] [PATCH] usb device wakeup flags This patch teaches "usb_device" about the new driver model wakeup support: - It updates device wakeup capabilities when entering a configuration with the WAKEUP attribute; - During suspend processing it consults the policy bit to see whether it should enable wakeup for that device. (This resolves a FIXME to not assume the answer is always "yes"; some devices lie about supporting remote wakeup.) Support for root hubs and the HCDs is separate (and more complex). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a12cab5314e9..c3e2024c4347 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1020,9 +1020,15 @@ void usb_set_device_state(struct usb_device *udev, spin_lock_irqsave(&device_state_lock, flags); if (udev->state == USB_STATE_NOTATTACHED) ; /* do nothing */ - else if (new_state != USB_STATE_NOTATTACHED) + else if (new_state != USB_STATE_NOTATTACHED) { udev->state = new_state; - else + if (new_state == USB_STATE_CONFIGURED) + device_init_wakeup(&udev->dev, + (udev->actconfig->desc.bmAttributes + & USB_CONFIG_ATT_WAKEUP)); + else if (new_state != USB_STATE_SUSPENDED) + device_init_wakeup(&udev->dev, 0); + } else recursively_mark_NOTATTACHED(udev); spin_unlock_irqrestore(&device_state_lock, flags); } @@ -1546,11 +1552,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, * NOTE: OTG devices may issue remote wakeup (or SRP) even when * we don't explicitly enable it here. */ - if (udev->actconfig - // && FIXME (remote wakeup enabled on this bus) - // ... currently assuming it's always appropriate - && (udev->actconfig->desc.bmAttributes - & USB_CONFIG_ATT_WAKEUP) != 0) { + if (device_may_wakeup(&udev->dev)) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_SET_FEATURE, USB_RECIP_DEVICE, USB_DEVICE_REMOTE_WAKEUP, 0, -- GitLab From dbe9035d4f690c44b55d3d0f1bc193e2c3fc57fa Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:37 -0500 Subject: [PATCH 0557/1519] [PATCH] Driver core: send hotplug event before adding class interfaces Move call to kobject_hotplug() above code that adds interfaces to a class device, otherwise children's hotplug events may reach userspace first. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/class.c b/drivers/base/class.c index ce23dc8c18c5..8df58c57dd25 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -524,6 +524,8 @@ int class_device_add(struct class_device *class_dev) class_name); } + kobject_hotplug(&class_dev->kobj, KOBJ_ADD); + /* notify any interfaces this device is now here */ if (parent) { down(&parent->sem); @@ -533,7 +535,6 @@ int class_device_add(struct class_device *class_dev) class_intf->add(class_dev); up(&parent->sem); } - kobject_hotplug(&class_dev->kobj, KOBJ_ADD); register_done: if (error && parent) -- GitLab From 4f5ca09e0b854a29b17401f59487664ae3b21aa4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:32 -0500 Subject: [PATCH 0558/1519] [PATCH] I2O: remove class interface I2O: remove i2o_device_class_interface misuse The intent of class interfaces was to provide different 'views' at the same object, not just run some code every time a new class device is registered. Kill interface structure, make class core register default attributes and set up sysfs links right when registering class devices. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/message/i2o/device.c | 255 +++++++++++++++++------------------ 1 file changed, 122 insertions(+), 133 deletions(-) diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c index 21f16ba3ac38..551d582e2887 100644 --- a/drivers/message/i2o/device.c +++ b/drivers/message/i2o/device.c @@ -45,10 +45,10 @@ static inline int i2o_device_issue_claim(struct i2o_device *dev, u32 cmd, writel(type, &msg->body[0]); return i2o_msg_post_wait(dev->iop, m, 60); -}; +} /** - * i2o_device_claim - claim a device for use by an OSM + * i2o_device_claim - claim a device for use by an OSM * @dev: I2O device to claim * @drv: I2O driver which wants to claim the device * @@ -73,7 +73,7 @@ int i2o_device_claim(struct i2o_device *dev) up(&dev->lock); return rc; -}; +} /** * i2o_device_claim_release - release a device that the OSM is using @@ -119,7 +119,8 @@ int i2o_device_claim_release(struct i2o_device *dev) up(&dev->lock); return rc; -}; +} + /** * i2o_device_release - release the memory for a I2O device @@ -135,39 +136,62 @@ static void i2o_device_release(struct device *dev) pr_debug("i2o: device %s released\n", dev->bus_id); kfree(i2o_dev); -}; +} /** - * i2o_device_class_release - Remove I2O device attributes + * i2o_device_class_release - I2O class device release function * @cd: I2O class device which is added to the I2O device class * - * Removes attributes from the I2O device again. Also search each device - * on the controller for I2O devices which refert to this device as parent - * or user and remove this links also. + * The function is just a stub - memory will be freed when + * associated I2O device is released. */ static void i2o_device_class_release(struct class_device *cd) { - struct i2o_device *i2o_dev, *tmp; - struct i2o_controller *c; + /* empty */ +} - i2o_dev = to_i2o_device(cd->dev); - c = i2o_dev->iop; +/** + * i2o_device_class_show_class_id - Displays class id of I2O device + * @cd: class device of which the class id should be displayed + * @buf: buffer into which the class id should be printed + * + * Returns the number of bytes which are printed into the buffer. + */ +static ssize_t i2o_device_class_show_class_id(struct class_device *cd, + char *buf) +{ + struct i2o_device *dev = to_i2o_device(cd->dev); - sysfs_remove_link(&i2o_dev->device.kobj, "parent"); - sysfs_remove_link(&i2o_dev->device.kobj, "user"); + sprintf(buf, "0x%03x\n", dev->lct_data.class_id); + return strlen(buf) + 1; +} - list_for_each_entry(tmp, &c->devices, list) { - if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "parent"); - if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "user"); - } +/** + * i2o_device_class_show_tid - Displays TID of I2O device + * @cd: class device of which the TID should be displayed + * @buf: buffer into which the class id should be printed + * + * Returns the number of bytes which are printed into the buffer. + */ +static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf) +{ + struct i2o_device *dev = to_i2o_device(cd->dev); + + sprintf(buf, "0x%03x\n", dev->lct_data.tid); + return strlen(buf) + 1; +} + +static struct class_device_attribute i2o_device_class_attrs[] = { + __ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id, NULL), + __ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL), + __ATTR_NULL }; /* I2O device class */ static struct class i2o_device_class = { - .name = "i2o_device", - .release = i2o_device_class_release + .name = "i2o_device", + .release = i2o_device_class_release, + .class_dev_attrs = i2o_device_class_attrs, }; /** @@ -197,7 +221,67 @@ static struct i2o_device *i2o_device_alloc(void) dev->classdev.dev = &dev->device; return dev; -}; +} + +/** + * i2o_setup_sysfs_links - Adds attributes to the I2O device + * @cd: I2O class device which is added to the I2O device class + * + * This function get called when a I2O device is added to the class. It + * creates the attributes for each device and creates user/parent symlink + * if necessary. + * + * Returns 0 on success or negative error code on failure. + */ +static void i2o_setup_sysfs_links(struct i2o_device *i2o_dev) +{ + struct i2o_controller *c = i2o_dev->iop; + struct i2o_device *tmp; + + /* create user entries for this device */ + tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid); + if (tmp && tmp != i2o_dev) + sysfs_create_link(&i2o_dev->device.kobj, + &tmp->device.kobj, "user"); + + /* create user entries refering to this device */ + list_for_each_entry(tmp, &c->devices, list) + if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid && + tmp != i2o_dev) + sysfs_create_link(&tmp->device.kobj, + &i2o_dev->device.kobj, "user"); + + /* create parent entries for this device */ + tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid); + if (tmp && tmp != i2o_dev) + sysfs_create_link(&i2o_dev->device.kobj, + &tmp->device.kobj, "parent"); + + /* create parent entries refering to this device */ + list_for_each_entry(tmp, &c->devices, list) + if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid && + tmp != i2o_dev) + sysfs_create_link(&tmp->device.kobj, + &i2o_dev->device.kobj, "parent"); +} + +static void i2o_remove_sysfs_links(struct i2o_device *i2o_dev) +{ + struct i2o_controller *c = i2o_dev->iop; + struct i2o_device *tmp; + + sysfs_remove_link(&i2o_dev->device.kobj, "parent"); + sysfs_remove_link(&i2o_dev->device.kobj, "user"); + + list_for_each_entry(tmp, &c->devices, list) { + if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) + sysfs_remove_link(&tmp->device.kobj, "parent"); + if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) + sysfs_remove_link(&tmp->device.kobj, "user"); + } +} + + /** * i2o_device_add - allocate a new I2O device and add it to the IOP @@ -222,6 +306,7 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, } dev->lct_data = *entry; + dev->iop = c; snprintf(dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit, dev->lct_data.tid); @@ -229,7 +314,6 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, snprintf(dev->classdev.class_id, BUS_ID_SIZE, "%d:%03x", c->unit, dev->lct_data.tid); - dev->iop = c; dev->device.parent = &c->device; device_register(&dev->device); @@ -238,12 +322,14 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, class_device_register(&dev->classdev); + i2o_setup_sysfs_links(dev); + i2o_driver_notify_device_add_all(dev); pr_debug("i2o: device %s added\n", dev->device.bus_id); return dev; -}; +} /** * i2o_device_remove - remove an I2O device from the I2O core @@ -256,10 +342,11 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, void i2o_device_remove(struct i2o_device *i2o_dev) { i2o_driver_notify_device_remove_all(i2o_dev); + i2o_remove_sysfs_links(i2o_dev); class_device_unregister(&i2o_dev->classdev); list_del(&i2o_dev->list); device_unregister(&i2o_dev->device); -}; +} /** * i2o_device_parse_lct - Parse a previously fetched LCT and create devices @@ -337,99 +424,8 @@ int i2o_device_parse_lct(struct i2o_controller *c) up(&c->lct_lock); return 0; -}; - -/** - * i2o_device_class_show_class_id - Displays class id of I2O device - * @cd: class device of which the class id should be displayed - * @buf: buffer into which the class id should be printed - * - * Returns the number of bytes which are printed into the buffer. - */ -static ssize_t i2o_device_class_show_class_id(struct class_device *cd, - char *buf) -{ - struct i2o_device *dev = to_i2o_device(cd->dev); - - sprintf(buf, "0x%03x\n", dev->lct_data.class_id); - return strlen(buf) + 1; -}; - -/** - * i2o_device_class_show_tid - Displays TID of I2O device - * @cd: class device of which the TID should be displayed - * @buf: buffer into which the class id should be printed - * - * Returns the number of bytes which are printed into the buffer. - */ -static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf) -{ - struct i2o_device *dev = to_i2o_device(cd->dev); - - sprintf(buf, "0x%03x\n", dev->lct_data.tid); - return strlen(buf) + 1; -}; - -/* I2O device class attributes */ -static CLASS_DEVICE_ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id, - NULL); -static CLASS_DEVICE_ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL); - -/** - * i2o_device_class_add - Adds attributes to the I2O device - * @cd: I2O class device which is added to the I2O device class - * - * This function get called when a I2O device is added to the class. It - * creates the attributes for each device and creates user/parent symlink - * if necessary. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_device_class_add(struct class_device *cd) -{ - struct i2o_device *i2o_dev, *tmp; - struct i2o_controller *c; - - i2o_dev = to_i2o_device(cd->dev); - c = i2o_dev->iop; - - class_device_create_file(cd, &class_device_attr_class_id); - class_device_create_file(cd, &class_device_attr_tid); - - /* create user entries for this device */ - tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid); - if (tmp && (tmp != i2o_dev)) - sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj, - "user"); - - /* create user entries refering to this device */ - list_for_each_entry(tmp, &c->devices, list) - if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid) - && (tmp != i2o_dev)) - sysfs_create_link(&tmp->device.kobj, - &i2o_dev->device.kobj, "user"); - - /* create parent entries for this device */ - tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid); - if (tmp && (tmp != i2o_dev)) - sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj, - "parent"); - - /* create parent entries refering to this device */ - list_for_each_entry(tmp, &c->devices, list) - if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) - && (tmp != i2o_dev)) - sysfs_create_link(&tmp->device.kobj, - &i2o_dev->device.kobj, "parent"); - - return 0; -}; +} -/* I2O device class interface */ -static struct class_interface i2o_device_class_interface = { - .class = &i2o_device_class, - .add = i2o_device_class_add -}; /* * Run time support routines @@ -553,11 +549,11 @@ int i2o_parm_field_get(struct i2o_device *i2o_dev, int group, int field, } /* - * if oper == I2O_PARAMS_TABLE_GET, get from all rows - * if fieldcount == -1 return all fields + * if oper == I2O_PARAMS_TABLE_GET, get from all rows + * if fieldcount == -1 return all fields * ibuf and ibuflen are unused (use NULL, 0) - * else return specific fields - * ibuf contains fieldindexes + * else return specific fields + * ibuf contains fieldindexes * * if oper == I2O_PARAMS_LIST_GET, get from specific rows * if fieldcount == -1 return all fields @@ -611,14 +607,8 @@ int i2o_parm_table_get(struct i2o_device *dev, int oper, int group, */ int i2o_device_init(void) { - int rc; - - rc = class_register(&i2o_device_class); - if (rc) - return rc; - - return class_interface_register(&i2o_device_class_interface); -}; + return class_register(&i2o_device_class); +} /** * i2o_device_exit - I2O devices exit function @@ -627,9 +617,8 @@ int i2o_device_init(void) */ void i2o_device_exit(void) { - class_interface_register(&i2o_device_class_interface); class_unregister(&i2o_device_class); -}; +} EXPORT_SYMBOL(i2o_device_claim); EXPORT_SYMBOL(i2o_device_claim_release); -- GitLab From 607cf4d9aa1d766890f42fc892d39d48cf6d6c16 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0559/1519] [PATCH] I2O: Clean up some pretty bad driver model abuses in the i2o code Signed-off-by: Greg Kroah-Hartman --- drivers/message/i2o/iop.c | 22 ++++++++++------------ include/linux/i2o.h | 2 +- 2 files changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 42f8b810d6e5..15deb45ce995 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -833,6 +833,7 @@ void i2o_iop_remove(struct i2o_controller *c) list_for_each_entry_safe(dev, tmp, &c->devices, list) i2o_device_remove(dev); + class_device_unregister(c->classdev); device_del(&c->device); /* Ask the IOP to switch to RESET state */ @@ -1077,9 +1078,7 @@ static void i2o_iop_release(struct device *dev) }; /* I2O controller class */ -static struct class i2o_controller_class = { - .name = "i2o_controller", -}; +static struct class *i2o_controller_class; /** * i2o_iop_alloc - Allocate and initialize a i2o_controller struct @@ -1110,14 +1109,10 @@ struct i2o_controller *i2o_iop_alloc(void) sprintf(c->name, "iop%d", c->unit); device_initialize(&c->device); - class_device_initialize(&c->classdev); c->device.release = &i2o_iop_release; - c->classdev.class = &i2o_controller_class; - c->classdev.dev = &c->device; snprintf(c->device.bus_id, BUS_ID_SIZE, "iop%d", c->unit); - snprintf(c->classdev.class_id, BUS_ID_SIZE, "iop%d", c->unit); #if BITS_PER_LONG == 64 spin_lock_init(&c->context_list_lock); @@ -1146,7 +1141,9 @@ int i2o_iop_add(struct i2o_controller *c) goto iop_reset; } - if ((rc = class_device_add(&c->classdev))) { + c->classdev = class_device_create(i2o_controller_class, 0, + &c->device, "iop%d", c->unit); + if (IS_ERR(c->classdev)) { osm_err("%s: could not add controller class\n", c->name); goto device_del; } @@ -1184,7 +1181,7 @@ int i2o_iop_add(struct i2o_controller *c) return 0; class_del: - class_device_del(&c->classdev); + class_device_unregister(c->classdev); device_del: device_del(&c->device); @@ -1250,7 +1247,8 @@ static int __init i2o_iop_init(void) if (rc) goto exit; - if ((rc = class_register(&i2o_controller_class))) { + i2o_controller_class = class_create(THIS_MODULE, "i2o_controller"); + if (IS_ERR(i2o_controller_class)) { osm_err("can't register class i2o_controller\n"); goto device_exit; } @@ -1273,7 +1271,7 @@ static int __init i2o_iop_init(void) i2o_driver_exit(); class_exit: - class_unregister(&i2o_controller_class); + class_destroy(i2o_controller_class); device_exit: i2o_device_exit(); @@ -1292,7 +1290,7 @@ static void __exit i2o_iop_exit(void) i2o_pci_exit(); i2o_exec_exit(); i2o_driver_exit(); - class_unregister(&i2o_controller_class); + class_destroy(i2o_controller_class); i2o_device_exit(); }; diff --git a/include/linux/i2o.h b/include/linux/i2o.h index bdc286ec947c..694ea298d4bc 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -194,7 +194,7 @@ struct i2o_controller { struct resource mem_resource; /* Mem resource allocated to the IOP */ struct device device; - struct class_device classdev; /* I2O controller class */ + struct class_device *classdev; /* I2O controller class device */ struct i2o_device *exec; /* Executive */ #if BITS_PER_LONG == 64 spinlock_t context_list_lock; /* lock for context_list */ -- GitLab From 7bd7b091429705eb281d60c553cc643aada8045a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 29 Sep 2005 00:40:07 -0500 Subject: [PATCH 0560/1519] [PATCH] I2O: remove i2o_device_class I2O: cleanup - remove i2o_device_class I2O devices reside on their own bus so there should be no reason to also have i2c_device class that mirros i2o bus. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/message/i2o/core.h | 3 -- drivers/message/i2o/device.c | 71 +++++++----------------------------- drivers/message/i2o/driver.c | 3 ++ drivers/message/i2o/iop.c | 10 +---- include/linux/i2o.h | 2 - 5 files changed, 17 insertions(+), 72 deletions(-) diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h index c5bcfd70f711..9eefedb16211 100644 --- a/drivers/message/i2o/core.h +++ b/drivers/message/i2o/core.h @@ -36,9 +36,6 @@ extern void __exit i2o_pci_exit(void); extern void i2o_device_remove(struct i2o_device *); extern int i2o_device_parse_lct(struct i2o_controller *); -extern int i2o_device_init(void); -extern void i2o_device_exit(void); - /* IOP */ extern struct i2o_controller *i2o_iop_alloc(void); extern void i2o_iop_free(struct i2o_controller *); diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c index 551d582e2887..d9879965eb50 100644 --- a/drivers/message/i2o/device.c +++ b/drivers/message/i2o/device.c @@ -138,17 +138,6 @@ static void i2o_device_release(struct device *dev) kfree(i2o_dev); } -/** - * i2o_device_class_release - I2O class device release function - * @cd: I2O class device which is added to the I2O device class - * - * The function is just a stub - memory will be freed when - * associated I2O device is released. - */ -static void i2o_device_class_release(struct class_device *cd) -{ - /* empty */ -} /** * i2o_device_class_show_class_id - Displays class id of I2O device @@ -157,12 +146,13 @@ static void i2o_device_class_release(struct class_device *cd) * * Returns the number of bytes which are printed into the buffer. */ -static ssize_t i2o_device_class_show_class_id(struct class_device *cd, - char *buf) +static ssize_t i2o_device_show_class_id(struct device *dev, + struct device_attribute *attr, + char *buf) { - struct i2o_device *dev = to_i2o_device(cd->dev); + struct i2o_device *i2o_dev = to_i2o_device(dev); - sprintf(buf, "0x%03x\n", dev->lct_data.class_id); + sprintf(buf, "0x%03x\n", i2o_dev->lct_data.class_id); return strlen(buf) + 1; } @@ -173,27 +163,22 @@ static ssize_t i2o_device_class_show_class_id(struct class_device *cd, * * Returns the number of bytes which are printed into the buffer. */ -static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf) +static ssize_t i2o_device_show_tid(struct device *dev, + struct device_attribute *attr, + char *buf) { - struct i2o_device *dev = to_i2o_device(cd->dev); + struct i2o_device *i2o_dev = to_i2o_device(dev); - sprintf(buf, "0x%03x\n", dev->lct_data.tid); + sprintf(buf, "0x%03x\n", i2o_dev->lct_data.tid); return strlen(buf) + 1; } -static struct class_device_attribute i2o_device_class_attrs[] = { - __ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id, NULL), - __ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL), +struct device_attribute i2o_device_attrs[] = { + __ATTR(class_id, S_IRUGO, i2o_device_show_class_id, NULL), + __ATTR(tid, S_IRUGO, i2o_device_show_tid, NULL), __ATTR_NULL }; -/* I2O device class */ -static struct class i2o_device_class = { - .name = "i2o_device", - .release = i2o_device_class_release, - .class_dev_attrs = i2o_device_class_attrs, -}; - /** * i2o_device_alloc - Allocate a I2O device and initialize it * @@ -217,8 +202,6 @@ static struct i2o_device *i2o_device_alloc(void) dev->device.bus = &i2o_bus_type; dev->device.release = &i2o_device_release; - dev->classdev.class = &i2o_device_class; - dev->classdev.dev = &dev->device; return dev; } @@ -311,17 +294,12 @@ static struct i2o_device *i2o_device_add(struct i2o_controller *c, snprintf(dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit, dev->lct_data.tid); - snprintf(dev->classdev.class_id, BUS_ID_SIZE, "%d:%03x", c->unit, - dev->lct_data.tid); - dev->device.parent = &c->device; device_register(&dev->device); list_add_tail(&dev->list, &c->devices); - class_device_register(&dev->classdev); - i2o_setup_sysfs_links(dev); i2o_driver_notify_device_add_all(dev); @@ -343,7 +321,6 @@ void i2o_device_remove(struct i2o_device *i2o_dev) { i2o_driver_notify_device_remove_all(i2o_dev); i2o_remove_sysfs_links(i2o_dev); - class_device_unregister(&i2o_dev->classdev); list_del(&i2o_dev->list); device_unregister(&i2o_dev->device); } @@ -598,28 +575,6 @@ int i2o_parm_table_get(struct i2o_device *dev, int oper, int group, return size; } -/** - * i2o_device_init - Initialize I2O devices - * - * Registers the I2O device class. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_device_init(void) -{ - return class_register(&i2o_device_class); -} - -/** - * i2o_device_exit - I2O devices exit function - * - * Unregisters the I2O device class. - */ -void i2o_device_exit(void) -{ - class_unregister(&i2o_device_class); -} - EXPORT_SYMBOL(i2o_device_claim); EXPORT_SYMBOL(i2o_device_claim_release); EXPORT_SYMBOL(i2o_parm_field_get); diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c index 739bfdef0c6d..0079a4be0af2 100644 --- a/drivers/message/i2o/driver.c +++ b/drivers/message/i2o/driver.c @@ -58,9 +58,12 @@ static int i2o_bus_match(struct device *dev, struct device_driver *drv) }; /* I2O bus type */ +extern struct device_attribute i2o_device_attrs[]; + struct bus_type i2o_bus_type = { .name = "i2o", .match = i2o_bus_match, + .dev_attrs = i2o_device_attrs, }; /** diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 15deb45ce995..176fb573ea26 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -1243,14 +1243,10 @@ static int __init i2o_iop_init(void) printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - rc = i2o_device_init(); - if (rc) - goto exit; - i2o_controller_class = class_create(THIS_MODULE, "i2o_controller"); if (IS_ERR(i2o_controller_class)) { osm_err("can't register class i2o_controller\n"); - goto device_exit; + goto exit; } if ((rc = i2o_driver_init())) @@ -1273,9 +1269,6 @@ static int __init i2o_iop_init(void) class_exit: class_destroy(i2o_controller_class); - device_exit: - i2o_device_exit(); - exit: return rc; } @@ -1291,7 +1284,6 @@ static void __exit i2o_iop_exit(void) i2o_exec_exit(); i2o_driver_exit(); class_destroy(i2o_controller_class); - i2o_device_exit(); }; module_init(i2o_iop_init); diff --git a/include/linux/i2o.h b/include/linux/i2o.h index 694ea298d4bc..84db8f6ae7e5 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -66,8 +66,6 @@ struct i2o_device { struct device device; struct semaphore lock; /* device lock */ - - struct class_device classdev; /* i2o device class */ }; /* -- GitLab From d8539d81aeee4dbdc0624a798321e822fb2df7ae Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:36 -0500 Subject: [PATCH 0561/1519] [PATCH] Driver core: pass interface to class interface methods Driver core: pass interface to class intreface methods Pass interface as argument to add() and remove() class interface methods. This way a subsystem can implement generic add/remove handlers and then call interface-specific ones. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 8 ++++---- drivers/pcmcia/ds.c | 6 ++++-- drivers/pcmcia/rsrc_nonstatic.c | 6 ++++-- drivers/pcmcia/socket_sysfs.c | 6 ++++-- drivers/scsi/sg.c | 8 ++++---- include/linux/device.h | 4 ++-- 6 files changed, 22 insertions(+), 16 deletions(-) diff --git a/drivers/base/class.c b/drivers/base/class.c index 8df58c57dd25..73d44cf53db0 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -532,7 +532,7 @@ int class_device_add(struct class_device *class_dev) list_add_tail(&class_dev->node, &parent->children); list_for_each_entry(class_intf, &parent->interfaces, node) if (class_intf->add) - class_intf->add(class_dev); + class_intf->add(class_dev, class_intf); up(&parent->sem); } @@ -612,7 +612,7 @@ void class_device_del(struct class_device *class_dev) list_del_init(&class_dev->node); list_for_each_entry(class_intf, &parent->interfaces, node) if (class_intf->remove) - class_intf->remove(class_dev); + class_intf->remove(class_dev, class_intf); up(&parent->sem); } @@ -729,7 +729,7 @@ int class_interface_register(struct class_interface *class_intf) list_add_tail(&class_intf->node, &parent->interfaces); if (class_intf->add) { list_for_each_entry(class_dev, &parent->children, node) - class_intf->add(class_dev); + class_intf->add(class_dev, class_intf); } up(&parent->sem); @@ -748,7 +748,7 @@ void class_interface_unregister(struct class_interface *class_intf) list_del_init(&class_intf->node); if (class_intf->remove) { list_for_each_entry(class_dev, &parent->children, node) - class_intf->remove(class_dev); + class_intf->remove(class_dev, class_intf); } up(&parent->sem); diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 080608c7381a..39d096b52926 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -1157,7 +1157,8 @@ static struct pcmcia_callback pcmcia_bus_callback = { .requery = pcmcia_bus_rescan, }; -static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev) +static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev, + struct class_interface *class_intf) { struct pcmcia_socket *socket = class_get_devdata(class_dev); int ret; @@ -1192,7 +1193,8 @@ static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev) return 0; } -static void pcmcia_bus_remove_socket(struct class_device *class_dev) +static void pcmcia_bus_remove_socket(struct class_device *class_dev, + struct class_interface *class_intf) { struct pcmcia_socket *socket = class_get_devdata(class_dev); diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index f9a5c70284b5..fc87e7e2b6b8 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -994,7 +994,8 @@ static struct class_device_attribute *pccard_rsrc_attributes[] = { NULL, }; -static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev) +static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev, + struct class_interface *class_intf) { struct pcmcia_socket *s = class_get_devdata(class_dev); struct class_device_attribute **attr; @@ -1011,7 +1012,8 @@ static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev) return ret; } -static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev) +static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev, + struct class_interface *class_intf) { struct pcmcia_socket *s = class_get_devdata(class_dev); struct class_device_attribute **attr; diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index 1040a6c1a8a4..4a3150a7854c 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -341,7 +341,8 @@ static struct bin_attribute pccard_cis_attr = { .write = pccard_store_cis, }; -static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev) +static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev, + struct class_interface *class_intf) { struct class_device_attribute **attr; int ret = 0; @@ -357,7 +358,8 @@ static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev) return ret; } -static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev) +static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev, + struct class_interface *class_intf) { struct class_device_attribute **attr; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index ad94367df430..f0d8b4eda5ad 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -104,8 +104,8 @@ static int sg_allow_dio = SG_ALLOW_DIO_DEF; #define SG_DEV_ARR_LUMP 32 /* amount to over allocate sg_dev_arr by */ -static int sg_add(struct class_device *); -static void sg_remove(struct class_device *); +static int sg_add(struct class_device *, struct class_interface *); +static void sg_remove(struct class_device *, struct class_interface *); static Scsi_Request *dummy_cmdp; /* only used for sizeof */ @@ -1506,7 +1506,7 @@ static int sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) } static int -sg_add(struct class_device *cl_dev) +sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) { struct scsi_device *scsidp = to_scsi_device(cl_dev->dev); struct gendisk *disk; @@ -1582,7 +1582,7 @@ sg_add(struct class_device *cl_dev) } static void -sg_remove(struct class_device *cl_dev) +sg_remove(struct class_device *cl_dev, struct class_interface *cl_intf) { struct scsi_device *scsidp = to_scsi_device(cl_dev->dev); Sg_device *sdp = NULL; diff --git a/include/linux/device.h b/include/linux/device.h index 95d607a48f06..a53a822c4d16 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -251,8 +251,8 @@ struct class_interface { struct list_head node; struct class *class; - int (*add) (struct class_device *); - void (*remove) (struct class_device *); + int (*add) (struct class_device *, struct class_interface *); + void (*remove) (struct class_device *, struct class_interface *); }; extern int class_interface_register(struct class_interface *); -- GitLab From a7fd67062efc5b0fc9a61368c607fa92d1d57f9e Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 1 Oct 2005 14:49:43 +0200 Subject: [PATCH 0562/1519] [PATCH] add sysfs attr to re-emit device hotplug event A "coldplug + udevstart" can be simple like this: for i in /sys/block/*/*/uevent; do echo 1 > $i; done for i in /sys/class/*/*/uevent; do echo 1 > $i; done for i in /sys/bus/*/devices/*/uevent; do echo 1 > $i; done Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 16 ++++++++++-- drivers/base/core.c | 16 ++++++++++++ drivers/block/genhd.c | 25 ++++++++++++++++++ fs/partitions/check.c | 27 +++++++++++++++++++- include/linux/device.h | 57 +++++++++++++++++++++--------------------- include/linux/genhd.h | 1 + 6 files changed, 110 insertions(+), 32 deletions(-) diff --git a/drivers/base/class.c b/drivers/base/class.c index 73d44cf53db0..3cf6eb36f3d8 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -442,6 +442,13 @@ static ssize_t show_dev(struct class_device *class_dev, char *buf) return print_dev_t(buf, class_dev->devt); } +static ssize_t store_uevent(struct class_device *class_dev, + const char *buf, size_t count) +{ + kobject_hotplug(&class_dev->kobj, KOBJ_ADD); + return count; +} + void class_device_initialize(struct class_device *class_dev) { kobj_set_kset_s(class_dev, class_obj_subsys); @@ -497,6 +504,12 @@ int class_device_add(struct class_device *class_dev) goto register_done; /* add the needed attributes to this device */ + class_dev->uevent_attr.attr.name = "uevent"; + class_dev->uevent_attr.attr.mode = S_IWUSR; + class_dev->uevent_attr.attr.owner = parent->owner; + class_dev->uevent_attr.store = store_uevent; + class_device_create_file(class_dev, &class_dev->uevent_attr); + if (MAJOR(class_dev->devt)) { struct class_device_attribute *attr; attr = kzalloc(sizeof(*attr), GFP_KERNEL); @@ -505,12 +518,10 @@ int class_device_add(struct class_device *class_dev) kobject_del(&class_dev->kobj); goto register_done; } - attr->attr.name = "dev"; attr->attr.mode = S_IRUGO; attr->attr.owner = parent->owner; attr->show = show_dev; - attr->store = NULL; class_device_create_file(class_dev, attr); class_dev->devt_attr = attr; } @@ -621,6 +632,7 @@ void class_device_del(struct class_device *class_dev) sysfs_remove_link(&class_dev->kobj, "device"); sysfs_remove_link(&class_dev->dev->kobj, class_name); } + class_device_remove_file(class_dev, &class_dev->uevent_attr); if (class_dev->devt_attr) class_device_remove_file(class_dev, class_dev->devt_attr); class_device_remove_attrs(class_dev); diff --git a/drivers/base/core.c b/drivers/base/core.c index 31109193e2c4..ac4b5fdd95f5 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -154,6 +154,13 @@ static struct kset_hotplug_ops device_hotplug_ops = { .hotplug = dev_hotplug, }; +static ssize_t store_uevent(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + kobject_hotplug(&dev->kobj, KOBJ_ADD); + return count; +} + /** * device_subsys - structure to be registered with kobject core. */ @@ -259,6 +266,14 @@ int device_add(struct device *dev) if ((error = kobject_add(&dev->kobj))) goto Error; + + dev->uevent_attr.attr.name = "uevent"; + dev->uevent_attr.attr.mode = S_IWUSR; + if (dev->driver) + dev->uevent_attr.attr.owner = dev->driver->owner; + dev->uevent_attr.store = store_uevent; + device_create_file(dev, &dev->uevent_attr); + kobject_hotplug(&dev->kobj, KOBJ_ADD); if ((error = device_pm_add(dev))) goto PMError; @@ -350,6 +365,7 @@ void device_del(struct device * dev) if (parent) klist_del(&dev->knode_parent); + device_remove_file(dev, &dev->uevent_attr); /* Notify the platform of the removal, in case they * need to do anything... diff --git a/drivers/block/genhd.c b/drivers/block/genhd.c index d42840cc0d1d..486ce1fdeb8c 100644 --- a/drivers/block/genhd.c +++ b/drivers/block/genhd.c @@ -337,10 +337,30 @@ static ssize_t disk_attr_show(struct kobject *kobj, struct attribute *attr, return ret; } +static ssize_t disk_attr_store(struct kobject * kobj, struct attribute * attr, + const char *page, size_t count) +{ + struct gendisk *disk = to_disk(kobj); + struct disk_attribute *disk_attr = + container_of(attr,struct disk_attribute,attr); + ssize_t ret = 0; + + if (disk_attr->store) + ret = disk_attr->store(disk, page, count); + return ret; +} + static struct sysfs_ops disk_sysfs_ops = { .show = &disk_attr_show, + .store = &disk_attr_store, }; +static ssize_t disk_uevent_store(struct gendisk * disk, + const char *buf, size_t count) +{ + kobject_hotplug(&disk->kobj, KOBJ_ADD); + return count; +} static ssize_t disk_dev_read(struct gendisk * disk, char *page) { dev_t base = MKDEV(disk->major, disk->first_minor); @@ -382,6 +402,10 @@ static ssize_t disk_stats_read(struct gendisk * disk, char *page) jiffies_to_msecs(disk_stat_read(disk, io_ticks)), jiffies_to_msecs(disk_stat_read(disk, time_in_queue))); } +static struct disk_attribute disk_attr_uevent = { + .attr = {.name = "uevent", .mode = S_IWUSR }, + .store = disk_uevent_store +}; static struct disk_attribute disk_attr_dev = { .attr = {.name = "dev", .mode = S_IRUGO }, .show = disk_dev_read @@ -404,6 +428,7 @@ static struct disk_attribute disk_attr_stat = { }; static struct attribute * default_attrs[] = { + &disk_attr_uevent.attr, &disk_attr_dev.attr, &disk_attr_range.attr, &disk_attr_removable.attr, diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 77e178f13162..d95a110293fa 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -192,6 +192,7 @@ check_partition(struct gendisk *hd, struct block_device *bdev) struct part_attribute { struct attribute attr; ssize_t (*show)(struct hd_struct *,char *); + ssize_t (*store)(struct hd_struct *,const char *, size_t); }; static ssize_t @@ -201,14 +202,33 @@ part_attr_show(struct kobject * kobj, struct attribute * attr, char * page) struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr); ssize_t ret = 0; if (part_attr->show) - ret = part_attr->show(p,page); + ret = part_attr->show(p, page); + return ret; +} +static ssize_t +part_attr_store(struct kobject * kobj, struct attribute * attr, + const char *page, size_t count) +{ + struct hd_struct * p = container_of(kobj,struct hd_struct,kobj); + struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr); + ssize_t ret = 0; + + if (part_attr->store) + ret = part_attr->store(p, page, count); return ret; } static struct sysfs_ops part_sysfs_ops = { .show = part_attr_show, + .store = part_attr_store, }; +static ssize_t part_uevent_store(struct hd_struct * p, + const char *page, size_t count) +{ + kobject_hotplug(&p->kobj, KOBJ_ADD); + return count; +} static ssize_t part_dev_read(struct hd_struct * p, char *page) { struct gendisk *disk = container_of(p->kobj.parent,struct gendisk,kobj); @@ -229,6 +249,10 @@ static ssize_t part_stat_read(struct hd_struct * p, char *page) p->reads, (unsigned long long)p->read_sectors, p->writes, (unsigned long long)p->write_sectors); } +static struct part_attribute part_attr_uevent = { + .attr = {.name = "uevent", .mode = S_IWUSR }, + .store = part_uevent_store +}; static struct part_attribute part_attr_dev = { .attr = {.name = "dev", .mode = S_IRUGO }, .show = part_dev_read @@ -247,6 +271,7 @@ static struct part_attribute part_attr_stat = { }; static struct attribute * default_attrs[] = { + &part_attr_uevent.attr, &part_attr_dev.attr, &part_attr_start.attr, &part_attr_size.attr, diff --git a/include/linux/device.h b/include/linux/device.h index a53a822c4d16..e86a580b72e1 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -190,6 +190,18 @@ struct class_attribute class_attr_##_name = __ATTR(_name,_mode,_show,_store) extern int class_create_file(struct class *, const struct class_attribute *); extern void class_remove_file(struct class *, const struct class_attribute *); +struct class_device_attribute { + struct attribute attr; + ssize_t (*show)(struct class_device *, char * buf); + ssize_t (*store)(struct class_device *, const char * buf, size_t count); +}; + +#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \ +struct class_device_attribute class_device_attr_##_name = \ + __ATTR(_name,_mode,_show,_store) + +extern int class_device_create_file(struct class_device *, + const struct class_device_attribute *); struct class_device { struct list_head node; @@ -198,6 +210,7 @@ struct class_device { struct class * class; /* required */ dev_t devt; /* dev_t, creates the sysfs "dev" */ struct class_device_attribute *devt_attr; + struct class_device_attribute uevent_attr; struct device * dev; /* not necessary, but nice to have */ void * class_data; /* class-specific data */ @@ -228,18 +241,6 @@ extern int class_device_rename(struct class_device *, char *); extern struct class_device * class_device_get(struct class_device *); extern void class_device_put(struct class_device *); -struct class_device_attribute { - struct attribute attr; - ssize_t (*show)(struct class_device *, char * buf); - ssize_t (*store)(struct class_device *, const char * buf, size_t count); -}; - -#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \ -struct class_device_attribute class_device_attr_##_name = \ - __ATTR(_name,_mode,_show,_store) - -extern int class_device_create_file(struct class_device *, - const struct class_device_attribute *); extern void class_device_remove_file(struct class_device *, const struct class_device_attribute *); extern int class_device_create_bin_file(struct class_device *, @@ -266,6 +267,20 @@ extern struct class_device *class_device_create(struct class *cls, dev_t devt, extern void class_device_destroy(struct class *cls, dev_t devt); +/* interface for exporting device attributes */ +struct device_attribute { + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); +}; + +#define DEVICE_ATTR(_name,_mode,_show,_store) \ +struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store) + +extern int device_create_file(struct device *device, struct device_attribute * entry); +extern void device_remove_file(struct device * dev, struct device_attribute * attr); struct device { struct klist klist_children; struct klist_node knode_parent; /* node in sibling list */ @@ -275,6 +290,7 @@ struct device { struct kobject kobj; char bus_id[BUS_ID_SIZE]; /* position on parent bus */ + struct device_attribute uevent_attr; struct semaphore sem; /* semaphore to synchronize calls to * its driver. @@ -343,23 +359,6 @@ extern int device_attach(struct device * dev); extern void driver_attach(struct device_driver * drv); -/* driverfs interface for exporting device attributes */ - -struct device_attribute { - struct attribute attr; - ssize_t (*show)(struct device *dev, struct device_attribute *attr, - char *buf); - ssize_t (*store)(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count); -}; - -#define DEVICE_ATTR(_name,_mode,_show,_store) \ -struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store) - - -extern int device_create_file(struct device *device, struct device_attribute * entry); -extern void device_remove_file(struct device * dev, struct device_attribute * attr); - /* * Platform "fixup" functions - allow the platform to have their say * about devices and actions that the general device layer doesn't diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 01796c41c951..78af34840c69 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -132,6 +132,7 @@ struct gendisk { struct disk_attribute { struct attribute attr; ssize_t (*show)(struct gendisk *, char *); + ssize_t (*store)(struct gendisk *, const char *, size_t); }; /* -- GitLab From 51d172d5f3a193e4b8f76179b2e55d7a36b94117 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0563/1519] [PATCH] Driver Core: add the ability for class_device structures to be nested This patch allows struct class_device to be nested, so that another struct class_device can be the parent of a new one, instead of only having the struct class be the parent. This will allow us to (hopefully) fix up the input and video class subsystem mess. But please people, don't go crazy and start making huge trees of class devices, you should only need 2 levels deep to get everything to work (remember to use a class_interface to get notification of a new class device being added to the system.) Oh, this also allows us to have the possibility of potentially, someday, moving /sys/block into /sys/class. The main hindrance is that pesky /dev numberspace issue... Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 125 ++++++++++++++++++++++++++--------------- include/linux/device.h | 13 ++++- 2 files changed, 91 insertions(+), 47 deletions(-) diff --git a/drivers/base/class.c b/drivers/base/class.c index 3cf6eb36f3d8..c3e569730afe 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -99,7 +99,8 @@ struct class * class_get(struct class * cls) void class_put(struct class * cls) { - subsys_put(&cls->subsys); + if (cls) + subsys_put(&cls->subsys); } @@ -165,14 +166,25 @@ void class_unregister(struct class * cls) static void class_create_release(struct class *cls) { + pr_debug("%s called for %s\n", __FUNCTION__, cls->name); kfree(cls); } static void class_device_create_release(struct class_device *class_dev) { + pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id); kfree(class_dev); } +/* needed to allow these devices to have parent class devices */ +static int class_device_create_hotplug(struct class_device *class_dev, + char **envp, int num_envp, + char *buffer, int buffer_size) +{ + pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id); + return 0; +} + /** * class_create - create a struct class structure * @owner: pointer to the module that is to "own" this struct class @@ -301,10 +313,12 @@ static void class_dev_release(struct kobject * kobj) kfree(cd->devt_attr); cd->devt_attr = NULL; - if (cls->release) + if (cd->release) + cd->release(cd); + else if (cls->release) cls->release(cd); else { - printk(KERN_ERR "Device class '%s' does not have a release() function, " + printk(KERN_ERR "Class Device '%s' does not have a release() function, " "it is broken and must be fixed.\n", cd->class_id); WARN_ON(1); @@ -382,14 +396,18 @@ static int class_hotplug(struct kset *kset, struct kobject *kobj, char **envp, buffer = &buffer[length]; buffer_size -= length; - if (class_dev->class->hotplug) { - /* have the bus specific function add its stuff */ - retval = class_dev->class->hotplug (class_dev, envp, num_envp, - buffer, buffer_size); - if (retval) { - pr_debug ("%s - hotplug() returned %d\n", - __FUNCTION__, retval); - } + if (class_dev->hotplug) { + /* have the class device specific function add its stuff */ + retval = class_dev->hotplug(class_dev, envp, num_envp, + buffer, buffer_size); + if (retval) + pr_debug("class_dev->hotplug() returned %d\n", retval); + } else if (class_dev->class->hotplug) { + /* have the class specific function add its stuff */ + retval = class_dev->class->hotplug(class_dev, envp, num_envp, + buffer, buffer_size); + if (retval) + pr_debug("class->hotplug() returned %d\n", retval); } return retval; @@ -476,37 +494,42 @@ static char *make_class_name(struct class_device *class_dev) int class_device_add(struct class_device *class_dev) { - struct class * parent = NULL; - struct class_interface * class_intf; + struct class *parent_class = NULL; + struct class_device *parent_class_dev = NULL; + struct class_interface *class_intf; char *class_name = NULL; - int error; + int error = -EINVAL; class_dev = class_device_get(class_dev); if (!class_dev) return -EINVAL; - if (!strlen(class_dev->class_id)) { - error = -EINVAL; + if (!strlen(class_dev->class_id)) goto register_done; - } - parent = class_get(class_dev->class); + parent_class = class_get(class_dev->class); + if (!parent_class) + goto register_done; + parent_class_dev = class_device_get(class_dev->parent); pr_debug("CLASS: registering class device: ID = '%s'\n", class_dev->class_id); /* first, register with generic layer. */ kobject_set_name(&class_dev->kobj, "%s", class_dev->class_id); - if (parent) - class_dev->kobj.parent = &parent->subsys.kset.kobj; + if (parent_class_dev) + class_dev->kobj.parent = &parent_class_dev->kobj; + else + class_dev->kobj.parent = &parent_class->subsys.kset.kobj; - if ((error = kobject_add(&class_dev->kobj))) + error = kobject_add(&class_dev->kobj); + if (error) goto register_done; /* add the needed attributes to this device */ class_dev->uevent_attr.attr.name = "uevent"; class_dev->uevent_attr.attr.mode = S_IWUSR; - class_dev->uevent_attr.attr.owner = parent->owner; + class_dev->uevent_attr.attr.owner = parent_class->owner; class_dev->uevent_attr.store = store_uevent; class_device_create_file(class_dev, &class_dev->uevent_attr); @@ -520,7 +543,7 @@ int class_device_add(struct class_device *class_dev) } attr->attr.name = "dev"; attr->attr.mode = S_IRUGO; - attr->attr.owner = parent->owner; + attr->attr.owner = parent_class->owner; attr->show = show_dev; class_device_create_file(class_dev, attr); class_dev->devt_attr = attr; @@ -538,18 +561,20 @@ int class_device_add(struct class_device *class_dev) kobject_hotplug(&class_dev->kobj, KOBJ_ADD); /* notify any interfaces this device is now here */ - if (parent) { - down(&parent->sem); - list_add_tail(&class_dev->node, &parent->children); - list_for_each_entry(class_intf, &parent->interfaces, node) + if (parent_class) { + down(&parent_class->sem); + list_add_tail(&class_dev->node, &parent_class->children); + list_for_each_entry(class_intf, &parent_class->interfaces, node) if (class_intf->add) class_intf->add(class_dev, class_intf); - up(&parent->sem); + up(&parent_class->sem); } register_done: - if (error && parent) - class_put(parent); + if (error) { + class_put(parent_class); + class_device_put(parent_class_dev); + } class_device_put(class_dev); kfree(class_name); return error; @@ -564,21 +589,28 @@ int class_device_register(struct class_device *class_dev) /** * class_device_create - creates a class device and registers it with sysfs * @cs: pointer to the struct class that this device should be registered to. + * @parent: pointer to the parent struct class_device of this new device, if any. * @dev: the dev_t for the char device to be added. * @device: a pointer to a struct device that is assiociated with this class device. * @fmt: string for the class device's name * * This function can be used by char device classes. A struct * class_device will be created in sysfs, registered to the specified - * class. A "dev" file will be created, showing the dev_t for the - * device. The pointer to the struct class_device will be returned from - * the call. Any further sysfs files that might be required can be - * created using this pointer. + * class. + * A "dev" file will be created, showing the dev_t for the device, if + * the dev_t is not 0,0. + * If a pointer to a parent struct class_device is passed in, the newly + * created struct class_device will be a child of that device in sysfs. + * The pointer to the struct class_device will be returned from the + * call. Any further sysfs files that might be required can be created + * using this pointer. * * Note: the struct class passed to this function must have previously * been created with a call to class_create(). */ -struct class_device *class_device_create(struct class *cls, dev_t devt, +struct class_device *class_device_create(struct class *cls, + struct class_device *parent, + dev_t devt, struct device *device, char *fmt, ...) { va_list args; @@ -597,6 +629,9 @@ struct class_device *class_device_create(struct class *cls, dev_t devt, class_dev->devt = devt; class_dev->dev = device; class_dev->class = cls; + class_dev->parent = parent; + class_dev->release = class_device_create_release; + class_dev->hotplug = class_device_create_hotplug; va_start(args, fmt); vsnprintf(class_dev->class_id, BUS_ID_SIZE, fmt, args); @@ -614,17 +649,18 @@ struct class_device *class_device_create(struct class *cls, dev_t devt, void class_device_del(struct class_device *class_dev) { - struct class * parent = class_dev->class; - struct class_interface * class_intf; + struct class *parent_class = class_dev->class; + struct class_device *parent_device = class_dev->parent; + struct class_interface *class_intf; char *class_name = NULL; - if (parent) { - down(&parent->sem); + if (parent_class) { + down(&parent_class->sem); list_del_init(&class_dev->node); - list_for_each_entry(class_intf, &parent->interfaces, node) + list_for_each_entry(class_intf, &parent_class->interfaces, node) if (class_intf->remove) class_intf->remove(class_dev, class_intf); - up(&parent->sem); + up(&parent_class->sem); } if (class_dev->dev) { @@ -640,8 +676,8 @@ void class_device_del(struct class_device *class_dev) kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE); kobject_del(&class_dev->kobj); - if (parent) - class_put(parent); + class_device_put(parent_device); + class_put(parent_class); kfree(class_name); } @@ -721,7 +757,8 @@ struct class_device * class_device_get(struct class_device *class_dev) void class_device_put(struct class_device *class_dev) { - kobject_put(&class_dev->kobj); + if (class_dev) + kobject_put(&class_dev->kobj); } diff --git a/include/linux/device.h b/include/linux/device.h index e86a580b72e1..226e550ae2ea 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -213,7 +213,11 @@ struct class_device { struct class_device_attribute uevent_attr; struct device * dev; /* not necessary, but nice to have */ void * class_data; /* class-specific data */ + struct class_device *parent; /* parent of this child device, if there is one */ + void (*release)(struct class_device *dev); + int (*hotplug)(struct class_device *dev, char **envp, + int num_envp, char *buffer, int buffer_size); char class_id[BUS_ID_SIZE]; /* unique to this class */ }; @@ -261,9 +265,12 @@ extern void class_interface_unregister(struct class_interface *); extern struct class *class_create(struct module *owner, char *name); extern void class_destroy(struct class *cls); -extern struct class_device *class_device_create(struct class *cls, dev_t devt, - struct device *device, char *fmt, ...) - __attribute__((format(printf,4,5))); +extern struct class_device *class_device_create(struct class *cls, + struct class_device *parent, + dev_t devt, + struct device *device, + char *fmt, ...) + __attribute__((format(printf,5,6))); extern void class_device_destroy(struct class *cls, dev_t devt); -- GitLab From 53f4654272df7c51064825024340554b39c9efba Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0564/1519] [PATCH] Driver Core: fix up all callers of class_device_create() The previous patch adding the ability to nest struct class_device changed the paramaters to the call class_device_create(). This patch fixes up all in-kernel users of the function. Signed-off-by: Greg Kroah-Hartman --- arch/i386/kernel/cpuid.c | 2 +- arch/i386/kernel/msr.c | 2 +- drivers/block/aoe/aoechr.c | 2 +- drivers/block/paride/pg.c | 2 +- drivers/block/paride/pt.c | 4 ++-- drivers/char/dsp56k.c | 2 +- drivers/char/ftape/zftape/zftape-init.c | 12 ++++++------ drivers/char/ip2main.c | 10 ++++++---- drivers/char/ipmi/ipmi_devintf.c | 2 +- drivers/char/istallion.c | 3 ++- drivers/char/lp.c | 2 +- drivers/char/mem.c | 3 ++- drivers/char/misc.c | 2 +- drivers/char/ppdev.c | 2 +- drivers/char/raw.c | 4 ++-- drivers/char/snsc.c | 2 +- drivers/char/stallion.c | 4 +++- drivers/char/tipar.c | 2 +- drivers/char/tty_io.c | 10 +++++----- drivers/char/vc_screen.c | 10 ++++++---- drivers/char/viotape.c | 4 ++-- drivers/hwmon/hwmon.c | 2 +- drivers/ide/ide-tape.c | 4 ++-- drivers/ieee1394/dv1394.c | 2 +- drivers/ieee1394/raw1394.c | 2 +- drivers/ieee1394/video1394.c | 2 +- drivers/infiniband/core/ucm.c | 2 +- drivers/input/evdev.c | 2 +- drivers/input/joydev.c | 2 +- drivers/input/mousedev.c | 4 ++-- drivers/input/tsdev.c | 2 +- drivers/isdn/capi/capi.c | 2 +- drivers/macintosh/adb.c | 2 +- drivers/media/dvb/dvb-core/dvbdev.c | 2 +- drivers/message/i2o/iop.c | 2 +- drivers/mtd/mtdchar.c | 4 ++-- drivers/net/ppp_generic.c | 2 +- drivers/net/wan/cosa.c | 2 +- drivers/s390/char/tape_class.c | 1 + drivers/s390/char/vmlogrdr.c | 1 + drivers/scsi/ch.c | 2 +- drivers/scsi/osst.c | 2 +- drivers/scsi/sg.c | 2 +- drivers/scsi/st.c | 2 +- drivers/usb/core/devio.c | 2 +- drivers/usb/core/file.c | 4 +++- drivers/usb/core/hcd.c | 3 ++- drivers/video/fbmem.c | 2 +- fs/coda/psdev.c | 4 ++-- sound/core/sound.c | 2 +- sound/oss/soundcard.c | 4 ++-- sound/sound_core.c | 2 +- 52 files changed, 86 insertions(+), 73 deletions(-) diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 4647db4ad6de..13bae799e626 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -163,7 +163,7 @@ static int cpuid_class_device_create(int i) int err = 0; struct class_device *class_err; - class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); + class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i); if (IS_ERR(class_err)) err = PTR_ERR(class_err); return err; diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 03100d6fc5d6..44470fea4309 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -246,7 +246,7 @@ static int msr_class_device_create(int i) int err = 0; struct class_device *class_err; - class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); + class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i); if (IS_ERR(class_err)) err = PTR_ERR(class_err); return err; diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c index 45a243096187..41ae0ede619a 100644 --- a/drivers/block/aoe/aoechr.c +++ b/drivers/block/aoe/aoechr.c @@ -224,7 +224,7 @@ aoechr_init(void) return PTR_ERR(aoe_class); } for (i = 0; i < ARRAY_SIZE(chardevs); ++i) - class_device_create(aoe_class, + class_device_create(aoe_class, NULL, MKDEV(AOE_MAJOR, chardevs[i].minor), NULL, chardevs[i].name); diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index b3982395f22b..82f2d6d2eeef 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -674,7 +674,7 @@ static int __init pg_init(void) for (unit = 0; unit < PG_UNITS; unit++) { struct pg *dev = &devices[unit]; if (dev->present) { - class_device_create(pg_class, MKDEV(major, unit), + class_device_create(pg_class, NULL, MKDEV(major, unit), NULL, "pg%u", unit); err = devfs_mk_cdev(MKDEV(major, unit), S_IFCHR | S_IRUSR | S_IWUSR, "pg/%u", diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c index d8d35233cf49..686c95573452 100644 --- a/drivers/block/paride/pt.c +++ b/drivers/block/paride/pt.c @@ -971,7 +971,7 @@ static int __init pt_init(void) devfs_mk_dir("pt"); for (unit = 0; unit < PT_UNITS; unit++) if (pt[unit].present) { - class_device_create(pt_class, MKDEV(major, unit), + class_device_create(pt_class, NULL, MKDEV(major, unit), NULL, "pt%d", unit); err = devfs_mk_cdev(MKDEV(major, unit), S_IFCHR | S_IRUSR | S_IWUSR, @@ -980,7 +980,7 @@ static int __init pt_init(void) class_device_destroy(pt_class, MKDEV(major, unit)); goto out_class; } - class_device_create(pt_class, MKDEV(major, unit + 128), + class_device_create(pt_class, NULL, MKDEV(major, unit + 128), NULL, "pt%dn", unit); err = devfs_mk_cdev(MKDEV(major, unit + 128), S_IFCHR | S_IRUSR | S_IWUSR, diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c index 26271e3ca823..8693835cb2d5 100644 --- a/drivers/char/dsp56k.c +++ b/drivers/char/dsp56k.c @@ -515,7 +515,7 @@ static int __init dsp56k_init_driver(void) err = PTR_ERR(dsp56k_class); goto out_chrdev; } - class_device_create(dsp56k_class, MKDEV(DSP56K_MAJOR, 0), NULL, "dsp56k"); + class_device_create(dsp56k_class, NULL, MKDEV(DSP56K_MAJOR, 0), NULL, "dsp56k"); err = devfs_mk_cdev(MKDEV(DSP56K_MAJOR, 0), S_IFCHR | S_IRUSR | S_IWUSR, "dsp56k"); diff --git a/drivers/char/ftape/zftape/zftape-init.c b/drivers/char/ftape/zftape/zftape-init.c index 5745b74044ec..821357ce7e0e 100644 --- a/drivers/char/ftape/zftape/zftape-init.c +++ b/drivers/char/ftape/zftape/zftape-init.c @@ -331,27 +331,27 @@ KERN_INFO zft_class = class_create(THIS_MODULE, "zft"); for (i = 0; i < 4; i++) { - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "qft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 4), S_IFCHR | S_IRUSR | S_IWUSR, "nqft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 16), S_IFCHR | S_IRUSR | S_IWUSR, "zqft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 20), S_IFCHR | S_IRUSR | S_IWUSR, "nzqft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 32), S_IFCHR | S_IRUSR | S_IWUSR, "rawqft%i", i); - class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i); + class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i); devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 36), S_IFCHR | S_IRUSR | S_IWUSR, "nrawqft%i", i); diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c index 9e4e26aef94e..d815d197dc3e 100644 --- a/drivers/char/ip2main.c +++ b/drivers/char/ip2main.c @@ -721,8 +721,9 @@ ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize) } if ( NULL != ( pB = i2BoardPtrTable[i] ) ) { - class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR, - 4 * i), NULL, "ipl%d", i); + class_device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i), + NULL, "ipl%d", i); err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i), S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, "ip2/ipl%d", i); @@ -732,8 +733,9 @@ ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize) goto out_class; } - class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR, - 4 * i + 1), NULL, "stat%d", i); + class_device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i + 1), + NULL, "stat%d", i); err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1), S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, "ip2/stat%d", i); diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index a09ff1080687..7c0684deea06 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -798,7 +798,7 @@ static void ipmi_new_smi(int if_num) devfs_mk_cdev(dev, S_IFCHR | S_IRUSR | S_IWUSR, "ipmidev/%d", if_num); - class_device_create(ipmi_class, dev, NULL, "ipmi%d", if_num); + class_device_create(ipmi_class, NULL, dev, NULL, "ipmi%d", if_num); } static void ipmi_smi_gone(int if_num) diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 9c19e5435a11..e3ddbdb85a2f 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -5246,7 +5246,8 @@ int __init stli_init(void) devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "staliomem/%d", i); - class_device_create(istallion_class, MKDEV(STL_SIOMEMMAJOR, i), + class_device_create(istallion_class, NULL, + MKDEV(STL_SIOMEMMAJOR, i), NULL, "staliomem%d", i); } diff --git a/drivers/char/lp.c b/drivers/char/lp.c index 2afb9038dbc5..e57260525293 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -805,7 +805,7 @@ static int lp_register(int nr, struct parport *port) if (reset) lp_reset(nr); - class_device_create(lp_class, MKDEV(LP_MAJOR, nr), NULL, + class_device_create(lp_class, NULL, MKDEV(LP_MAJOR, nr), NULL, "lp%d", nr); devfs_mk_cdev(MKDEV(LP_MAJOR, nr), S_IFCHR | S_IRUGO | S_IWUGO, "printers/%d", nr); diff --git a/drivers/char/mem.c b/drivers/char/mem.c index f182752fe918..38be4b0dbd1c 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -920,7 +920,8 @@ static int __init chr_dev_init(void) mem_class = class_create(THIS_MODULE, "mem"); for (i = 0; i < ARRAY_SIZE(devlist); i++) { - class_device_create(mem_class, MKDEV(MEM_MAJOR, devlist[i].minor), + class_device_create(mem_class, NULL, + MKDEV(MEM_MAJOR, devlist[i].minor), NULL, devlist[i].name); devfs_mk_cdev(MKDEV(MEM_MAJOR, devlist[i].minor), S_IFCHR | devlist[i].mode, devlist[i].name); diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 0c8375165e29..3e4c0414a01a 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -234,7 +234,7 @@ int misc_register(struct miscdevice * misc) } dev = MKDEV(MISC_MAJOR, misc->minor); - misc->class = class_device_create(misc_class, dev, misc->dev, + misc->class = class_device_create(misc_class, NULL, dev, misc->dev, "%s", misc->name); if (IS_ERR(misc->class)) { err = PTR_ERR(misc->class); diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index 0e22880432bc..306ee0f091a4 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -752,7 +752,7 @@ static struct file_operations pp_fops = { static void pp_attach(struct parport *port) { - class_device_create(ppdev_class, MKDEV(PP_MAJOR, port->number), + class_device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number), NULL, "parport%d", port->number); } diff --git a/drivers/char/raw.c b/drivers/char/raw.c index f13e5de02207..30e4cbe16bb0 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -128,7 +128,7 @@ raw_ioctl(struct inode *inode, struct file *filp, static void bind_device(struct raw_config_request *rq) { class_device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor)); - class_device_create(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor), + class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor), NULL, "raw%d", rq->raw_minor); } @@ -307,7 +307,7 @@ static int __init raw_init(void) unregister_chrdev_region(dev, MAX_RAW_MINORS); goto error; } - class_device_create(raw_class, MKDEV(RAW_MAJOR, 0), NULL, "rawctl"); + class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl"); devfs_mk_cdev(MKDEV(RAW_MAJOR, 0), S_IFCHR | S_IRUGO | S_IWUGO, diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c index 261a41bf6d02..1758a83327e5 100644 --- a/drivers/char/snsc.c +++ b/drivers/char/snsc.c @@ -437,7 +437,7 @@ scdrv_init(void) continue; } - class_device_create(snsc_class, dev, NULL, + class_device_create(snsc_class, NULL, dev, NULL, "%s", devname); ia64_sn_irtr_intr_enable(scd->scd_nasid, diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 951545a6ef2d..1c686414e0a1 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -3095,7 +3095,9 @@ static int __init stl_init(void) devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i), S_IFCHR|S_IRUSR|S_IWUSR, "staliomem/%d", i); - class_device_create(stallion_class, MKDEV(STL_SIOMEMMAJOR, i), NULL, "staliomem%d", i); + class_device_create(stallion_class, NULL, + MKDEV(STL_SIOMEMMAJOR, i), NULL, + "staliomem%d", i); } stl_serial->owner = THIS_MODULE; diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c index ec78d2f161f7..41a94bc79f67 100644 --- a/drivers/char/tipar.c +++ b/drivers/char/tipar.c @@ -436,7 +436,7 @@ tipar_register(int nr, struct parport *port) goto out; } - class_device_create(tipar_class, MKDEV(TIPAR_MAJOR, + class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr), NULL, "par%d", nr); /* Use devfs, tree: /dev/ticables/par/[0..2] */ err = devfs_mk_cdev(MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr), diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index e5953f3433f3..f5649a337743 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2728,7 +2728,7 @@ void tty_register_device(struct tty_driver *driver, unsigned index, pty_line_name(driver, index, name); else tty_line_name(driver, index, name); - class_device_create(tty_class, dev, device, name); + class_device_create(tty_class, NULL, dev, device, "%s", name); } /** @@ -2983,14 +2983,14 @@ static int __init tty_init(void) register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0) panic("Couldn't register /dev/tty driver\n"); devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 0), S_IFCHR|S_IRUGO|S_IWUGO, "tty"); - class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty"); + class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty"); cdev_init(&console_cdev, &console_fops); if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0) panic("Couldn't register /dev/console driver\n"); devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 1), S_IFCHR|S_IRUSR|S_IWUSR, "console"); - class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 1), NULL, "console"); + class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL, "console"); #ifdef CONFIG_UNIX98_PTYS cdev_init(&ptmx_cdev, &ptmx_fops); @@ -2998,7 +2998,7 @@ static int __init tty_init(void) register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0) panic("Couldn't register /dev/ptmx driver\n"); devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 2), S_IFCHR|S_IRUGO|S_IWUGO, "ptmx"); - class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx"); + class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx"); #endif #ifdef CONFIG_VT @@ -3007,7 +3007,7 @@ static int __init tty_init(void) register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0) panic("Couldn't register /dev/tty0 driver\n"); devfs_mk_cdev(MKDEV(TTY_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vc/0"); - class_device_create(tty_class, MKDEV(TTY_MAJOR, 0), NULL, "tty0"); + class_device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0"); vty_init(); #endif diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index 79c2928a8817..f66c7ad6fd38 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -484,8 +484,10 @@ void vcs_make_devfs(struct tty_struct *tty) devfs_mk_cdev(MKDEV(VCS_MAJOR, tty->index + 129), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/a%u", tty->index + 1); - class_device_create(vc_class, MKDEV(VCS_MAJOR, tty->index + 1), NULL, "vcs%u", tty->index + 1); - class_device_create(vc_class, MKDEV(VCS_MAJOR, tty->index + 129), NULL, "vcsa%u", tty->index + 1); + class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1), + NULL, "vcs%u", tty->index + 1); + class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129), + NULL, "vcsa%u", tty->index + 1); } void vcs_remove_devfs(struct tty_struct *tty) { @@ -503,7 +505,7 @@ int __init vcs_init(void) devfs_mk_cdev(MKDEV(VCS_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/0"); devfs_mk_cdev(MKDEV(VCS_MAJOR, 128), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/a0"); - class_device_create(vc_class, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); - class_device_create(vc_class, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); + class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); + class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); return 0; } diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c index 0aff45fac2e6..a5e104f428f8 100644 --- a/drivers/char/viotape.c +++ b/drivers/char/viotape.c @@ -956,9 +956,9 @@ static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id) state[i].cur_part = 0; for (j = 0; j < MAX_PARTITIONS; ++j) state[i].part_stat_rwi[j] = VIOT_IDLE; - class_device_create(tape_class, MKDEV(VIOTAPE_MAJOR, i), NULL, + class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), NULL, "iseries!vt%d", i); - class_device_create(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80), + class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80), NULL, "iseries!nvt%d", i); devfs_mk_cdev(MKDEV(VIOTAPE_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "iseries/vt%d", i); diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index 9b41c9bd805f..6f48579799b5 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -45,7 +45,7 @@ struct class_device *hwmon_device_register(struct device *dev) return ERR_PTR(-ENOMEM); id = id & MAX_ID_MASK; - cdev = class_device_create(hwmon_class, MKDEV(0,0), dev, + cdev = class_device_create(hwmon_class, NULL, MKDEV(0,0), dev, HWMON_ID_FORMAT, id); if (IS_ERR(cdev)) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 95abe981530d..47f2b832555f 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4884,9 +4884,9 @@ static int ide_tape_probe(struct device *dev) idetape_setup(drive, tape, minor); - class_device_create(idetape_sysfs_class, + class_device_create(idetape_sysfs_class, NULL, MKDEV(IDETAPE_MAJOR, minor), dev, "%s", tape->name); - class_device_create(idetape_sysfs_class, + class_device_create(idetape_sysfs_class, NULL, MKDEV(IDETAPE_MAJOR, minor + 128), dev, "n%s", tape->name); devfs_mk_cdev(MKDEV(HWIF(drive)->major, minor), diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index e34730c7a874..cbbbe14b8849 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -2361,7 +2361,7 @@ static void dv1394_add_host (struct hpsb_host *host) ohci = (struct ti_ohci *)host->hostdata; - class_device_create(hpsb_protocol_class, MKDEV( + class_device_create(hpsb_protocol_class, NULL, MKDEV( IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)), NULL, "dv1394-%d", id); devfs_mk_dir("ieee1394/dv/host%d", id); diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index 0470f77a9cd1..24411e666b21 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -2912,7 +2912,7 @@ static int __init init_raw1394(void) hpsb_register_highlevel(&raw1394_highlevel); - if (IS_ERR(class_device_create(hpsb_protocol_class, MKDEV( + if (IS_ERR(class_device_create(hpsb_protocol_class, NULL, MKDEV( IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16), NULL, RAW1394_DEVICE_NAME))) { ret = -EFAULT; diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c index 11be9c9c82a8..23911da50154 100644 --- a/drivers/ieee1394/video1394.c +++ b/drivers/ieee1394/video1394.c @@ -1370,7 +1370,7 @@ static void video1394_add_host (struct hpsb_host *host) hpsb_set_hostinfo_key(&video1394_highlevel, host, ohci->host->id); minor = IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id; - class_device_create(hpsb_protocol_class, MKDEV( + class_device_create(hpsb_protocol_class, NULL, MKDEV( IEEE1394_MAJOR, minor), NULL, "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id); devfs_mk_cdev(MKDEV(IEEE1394_MAJOR, minor), diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index d0f0b0a2edd3..021b8f1d36d3 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -1300,7 +1300,7 @@ static int __init ib_ucm_init(void) goto err_class; } - class_device_create(ib_ucm_class, IB_UCM_DEV, NULL, "ucm"); + class_device_create(ib_ucm_class, NULL, IB_UCM_DEV, NULL, "ucm"); idr_init(&ctx_id_table); init_MUTEX(&ctx_id_mutex); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 3738d173f9a6..83b694cb8507 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -689,7 +689,7 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct devfs_mk_cdev(MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), S_IFCHR|S_IRUGO|S_IWUSR, "input/event%d", minor); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), dev->dev, "event%d", minor); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index e0938d1d3ad7..c696fb2a6f99 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -516,7 +516,7 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct devfs_mk_cdev(MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), S_IFCHR|S_IRUGO|S_IWUSR, "input/js%d", minor); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), dev->dev, "js%d", minor); diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index c6194a9dd174..d7144e1a9ae3 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -651,7 +651,7 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), S_IFCHR|S_IRUGO|S_IWUSR, "input/mouse%d", minor); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), dev->dev, "mouse%d", minor); @@ -740,7 +740,7 @@ static int __init mousedev_init(void) devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), S_IFCHR|S_IRUGO|S_IWUSR, "input/mice"); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 50c63a155156..fbb35c97551b 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -414,7 +414,7 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, S_IFCHR|S_IRUGO|S_IWUSR, "input/ts%d", minor); devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor + TSDEV_MINORS/2), S_IFCHR|S_IRUGO|S_IWUSR, "input/tsraw%d", minor); - class_device_create(input_class, + class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), dev->dev, "ts%d", minor); diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index 04fb606b5ddd..11ae0fddea04 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -1505,7 +1505,7 @@ static int __init capi_init(void) return PTR_ERR(capi_class); } - class_device_create(capi_class, MKDEV(capi_major, 0), NULL, "capi"); + class_device_create(capi_class, NULL, MKDEV(capi_major, 0), NULL, "capi"); devfs_mk_cdev(MKDEV(capi_major, 0), S_IFCHR | S_IRUSR | S_IWUSR, "isdn/capi20"); diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c index c0dc1e3fa58b..d2ead1776c16 100644 --- a/drivers/macintosh/adb.c +++ b/drivers/macintosh/adb.c @@ -905,5 +905,5 @@ adbdev_init(void) adb_dev_class = class_create(THIS_MODULE, "adb"); if (IS_ERR(adb_dev_class)) return; - class_device_create(adb_dev_class, MKDEV(ADB_MAJOR, 0), NULL, "adb"); + class_device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL, "adb"); } diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index 4b7adca3e286..477b4fa56430 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -235,7 +235,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, S_IFCHR | S_IRUSR | S_IWUSR, "dvb/adapter%d/%s%d", adap->num, dnames[type], id); - class_device_create(dvb_class, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)), + class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)), NULL, "dvb%d.%s%d", adap->num, dnames[type], id); dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n", diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index 176fb573ea26..361da8d1d5e7 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -1141,7 +1141,7 @@ int i2o_iop_add(struct i2o_controller *c) goto iop_reset; } - c->classdev = class_device_create(i2o_controller_class, 0, + c->classdev = class_device_create(i2o_controller_class, NULL, MKDEV(0,0), &c->device, "iop%d", c->unit); if (IS_ERR(c->classdev)) { osm_err("%s: could not add controller class\n", c->name); diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 1ed602a0f24c..c534fd5d95cb 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -24,10 +24,10 @@ static void mtd_notify_add(struct mtd_info* mtd) if (!mtd) return; - class_device_create(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), + class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), NULL, "mtd%d", mtd->index); - class_device_create(mtd_class, + class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1), NULL, "mtd%dro", mtd->index); } diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 0df7e92b0bf8..d3c9958b00d0 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -863,7 +863,7 @@ static int __init ppp_init(void) err = PTR_ERR(ppp_class); goto out_chrdev; } - class_device_create(ppp_class, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); + class_device_create(ppp_class, NULL, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); err = devfs_mk_cdev(MKDEV(PPP_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "ppp"); if (err) diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 7ff814fd65d0..ace68e5bc6c9 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -400,7 +400,7 @@ static int __init cosa_init(void) goto out_chrdev; } for (i=0; iclass_device = class_device_create( tape_class, + NULL, tcd->char_device->dev, device, "%s", tcd->device_name diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index 491f00c032e8..a107fec4457a 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -787,6 +787,7 @@ vmlogrdr_register_device(struct vmlogrdr_priv_t *priv) { return ret; } priv->class_device = class_device_create( + NULL, vmlogrdr_class, MKDEV(vmlogrdr_major, priv->minor_num), dev, diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index da6e51c7fe69..540147cb51ce 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -936,7 +936,7 @@ static int ch_probe(struct device *dev) if (init) ch_init_elem(ch); - class_device_create(ch_sysfs_class, + class_device_create(ch_sysfs_class, NULL, MKDEV(SCSI_CHANGER_MAJOR,ch->minor), dev, "s%s", ch->name); diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 3f2f2464fa63..0bb60de0bded 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -5627,7 +5627,7 @@ static void osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * if (!osst_sysfs_valid) return; - osst_class_member = class_device_create(osst_sysfs_class, dev, device, "%s", name); + osst_class_member = class_device_create(osst_sysfs_class, NULL, dev, device, "%s", name); if (IS_ERR(osst_class_member)) { printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name); return; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index f0d8b4eda5ad..40886e1c9616 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1550,7 +1550,7 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) if (sg_sysfs_valid) { struct class_device * sg_class_member; - sg_class_member = class_device_create(sg_sysfs_class, + sg_class_member = class_device_create(sg_sysfs_class, NULL, MKDEV(SCSI_GENERIC_MAJOR, k), cl_dev->dev, "%s", disk->disk_name); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index d001c046551b..d45ba4832162 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4375,7 +4375,7 @@ static void do_create_class_files(struct scsi_tape *STp, int dev_num, int mode) snprintf(name, 10, "%s%s%s", rew ? "n" : "", STp->disk->disk_name, st_formats[i]); st_class_member = - class_device_create(st_sysfs_class, + class_device_create(st_sysfs_class, NULL, MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, rew)), &STp->device->sdev_gendev, "%s", name); diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 487ff672b104..befe0c7f63d1 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1509,7 +1509,7 @@ void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); - dev->class_dev = class_device_create(usb_device_class, + dev->class_dev = class_device_create(usb_device_class, NULL, MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev, "usbdev%d.%d", dev->bus->busnum, dev->devnum); diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 65ca131cc44c..78cb4be9529f 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -172,7 +172,9 @@ int usb_register_dev(struct usb_interface *intf, ++temp; else temp = name; - intf->class_dev = class_device_create(usb_class, MKDEV(USB_MAJOR, minor), &intf->dev, "%s", temp); + intf->class_dev = class_device_create(usb_class, NULL, + MKDEV(USB_MAJOR, minor), + &intf->dev, "%s", temp); if (IS_ERR(intf->class_dev)) { spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1017a97a418b..c3eb66f5a1a4 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -782,7 +782,8 @@ static int usb_register_bus(struct usb_bus *bus) return -E2BIG; } - bus->class_dev = class_device_create(usb_host_class, MKDEV(0,0), bus->controller, "usb_host%d", busnum); + bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0), + bus->controller, "usb_host%d", busnum); if (IS_ERR(bus->class_dev)) { clear_bit(busnum, busmap.busmap); up(&usb_bus_list_lock); diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 70be7009f8af..9073be4221a8 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1031,7 +1031,7 @@ register_framebuffer(struct fb_info *fb_info) break; fb_info->node = i; - fb_info->class_device = class_device_create(fb_class, MKDEV(FB_MAJOR, i), + fb_info->class_device = class_device_create(fb_class, NULL, MKDEV(FB_MAJOR, i), fb_info->device, "fb%d", i); if (IS_ERR(fb_info->class_device)) { /* Not fatal */ diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c index 3d1cce3653b8..6a3df88accfe 100644 --- a/fs/coda/psdev.c +++ b/fs/coda/psdev.c @@ -370,8 +370,8 @@ static int init_coda_psdev(void) } devfs_mk_dir ("coda"); for (i = 0; i < MAX_CODADEVS; i++) { - class_device_create(coda_psdev_class, MKDEV(CODA_PSDEV_MAJOR,i), - NULL, "cfs%d", i); + class_device_create(coda_psdev_class, NULL, + MKDEV(CODA_PSDEV_MAJOR,i), NULL, "cfs%d", i); err = devfs_mk_cdev(MKDEV(CODA_PSDEV_MAJOR, i), S_IFCHR|S_IRUSR|S_IWUSR, "coda/%d", i); if (err) diff --git a/sound/core/sound.c b/sound/core/sound.c index 9e76bddb2c0b..b57519a3e3d9 100644 --- a/sound/core/sound.c +++ b/sound/core/sound.c @@ -231,7 +231,7 @@ int snd_register_device(int type, snd_card_t * card, int dev, snd_minor_t * reg, devfs_mk_cdev(MKDEV(major, minor), S_IFCHR | device_mode, "snd/%s", name); if (card) device = card->dev; - class_device_create(sound_class, MKDEV(major, minor), device, "%s", name); + class_device_create(sound_class, NULL, MKDEV(major, minor), device, "%s", name); up(&sound_mutex); return 0; diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c index 95fa81e26de2..d33bb464f70e 100644 --- a/sound/oss/soundcard.c +++ b/sound/oss/soundcard.c @@ -567,7 +567,7 @@ static int __init oss_init(void) devfs_mk_cdev(MKDEV(SOUND_MAJOR, dev_list[i].minor), S_IFCHR | dev_list[i].mode, "sound/%s", dev_list[i].name); - class_device_create(sound_class, + class_device_create(sound_class, NULL, MKDEV(SOUND_MAJOR, dev_list[i].minor), NULL, "%s", dev_list[i].name); @@ -579,7 +579,7 @@ static int __init oss_init(void) dev_list[i].minor + (j*0x10)), S_IFCHR | dev_list[i].mode, "sound/%s%d", dev_list[i].name, j); - class_device_create(sound_class, + class_device_create(sound_class, NULL, MKDEV(SOUND_MAJOR, dev_list[i].minor + (j*0x10)), NULL, "%s%d", dev_list[i].name, j); } diff --git a/sound/sound_core.c b/sound/sound_core.c index 954f994592ab..394b53e20cb8 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -174,7 +174,7 @@ static int sound_insert_unit(struct sound_unit **list, struct file_operations *f devfs_mk_cdev(MKDEV(SOUND_MAJOR, s->unit_minor), S_IFCHR | mode, s->name); - class_device_create(sound_class, MKDEV(SOUND_MAJOR, s->unit_minor), + class_device_create(sound_class, NULL, MKDEV(SOUND_MAJOR, s->unit_minor), dev, s->name+6); return r; -- GitLab From 74be227f728ed68bfc270153665b43fc1f0fa845 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0565/1519] [PATCH] Driver Core: document struct class_device properly Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/include/linux/device.h b/include/linux/device.h index 226e550ae2ea..10ab7807f8ea 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -203,6 +203,30 @@ struct class_device_attribute class_device_attr_##_name = \ extern int class_device_create_file(struct class_device *, const struct class_device_attribute *); +/** + * struct class_device - class devices + * @class: pointer to the parent class for this class device. This is required. + * @devt: for internal use by the driver core only. + * @node: for internal use by the driver core only. + * @kobj: for internal use by the driver core only. + * @devt_attr: for internal use by the driver core only. + * @dev: if set, a symlink to the struct device is created in the sysfs + * directory for this struct class device. + * @class_data: pointer to whatever you want to store here for this struct + * class_device. Use class_get_devdata() and class_set_devdata() to get and + * set this pointer. + * @parent: pointer to a struct class_device that is the parent of this struct + * class_device. If NULL, this class_device will show up at the root of the + * struct class in sysfs (which is probably what you want to have happen.) + * @release: pointer to a release function for this struct class_device. If + * set, this will be called instead of the class specific release function. + * Only use this if you want to override the default release function, like + * when you are nesting class_device structures. + * @hotplug: pointer to a hotplug function for this struct class_device. If + * set, this will be called instead of the class specific hotplug function. + * Only use this if you want to override the default hotplug function, like + * when you are nesting class_device structures. + */ struct class_device { struct list_head node; -- GitLab From 4f00469c16b86a3dd6ed66b28c605c8430d58eeb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:38 -0500 Subject: [PATCH 0566/1519] [PATCH] Input: kill devfs references Input: remove references to devfs from input subsystem Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/evdev.c | 4 ---- drivers/input/input.c | 7 ------- drivers/input/joydev.c | 4 ---- drivers/input/mousedev.c | 9 +-------- drivers/input/tsdev.c | 7 ------- 5 files changed, 1 insertion(+), 30 deletions(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 83b694cb8507..14ea57f963bb 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -20,7 +20,6 @@ #include #include #include -#include #include struct evdev { @@ -687,8 +686,6 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct evdev_table[minor] = evdev; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), - S_IFCHR|S_IRUGO|S_IWUSR, "input/event%d", minor); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), dev->dev, "event%d", minor); @@ -703,7 +700,6 @@ static void evdev_disconnect(struct input_handle *handle) class_device_destroy(input_class, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); - devfs_remove("input/event%d", evdev->minor); evdev->exist = 0; if (evdev->open) { diff --git a/drivers/input/input.c b/drivers/input/input.c index 14ae5583e198..072bbf528151 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -22,7 +22,6 @@ #include #include #include -#include MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Input core"); @@ -770,13 +769,8 @@ static int __init input_init(void) goto fail2; } - err = devfs_mk_dir("input"); - if (err) - goto fail3; - return 0; - fail3: unregister_chrdev(INPUT_MAJOR, "input"); fail2: input_proc_exit(); fail1: class_destroy(input_class); return err; @@ -785,7 +779,6 @@ static int __init input_init(void) static void __exit input_exit(void) { input_proc_exit(); - devfs_remove("input"); unregister_chrdev(INPUT_MAJOR, "input"); class_destroy(input_class); } diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index c696fb2a6f99..40d2b46cbc79 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -26,7 +26,6 @@ #include #include #include -#include MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Joystick device interfaces"); @@ -514,8 +513,6 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev_table[minor] = joydev; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), - S_IFCHR|S_IRUGO|S_IWUSR, "input/js%d", minor); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), dev->dev, "js%d", minor); @@ -529,7 +526,6 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev_list *list; class_device_destroy(input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); - devfs_remove("input/js%d", joydev->minor); joydev->exist = 0; if (joydev->open) { diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index d7144e1a9ae3..89c3e496f1ed 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -9,7 +9,7 @@ * the Free Software Foundation. */ -#define MOUSEDEV_MINOR_BASE 32 +#define MOUSEDEV_MINOR_BASE 32 #define MOUSEDEV_MINORS 32 #define MOUSEDEV_MIX 31 @@ -24,7 +24,6 @@ #include #include #include -#include #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX #include #endif @@ -649,8 +648,6 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru mousedev_table[minor] = mousedev; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), - S_IFCHR|S_IRUGO|S_IWUSR, "input/mouse%d", minor); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), dev->dev, "mouse%d", minor); @@ -665,7 +662,6 @@ static void mousedev_disconnect(struct input_handle *handle) class_device_destroy(input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); - devfs_remove("input/mouse%d", mousedev->minor); mousedev->exist = 0; if (mousedev->open) { @@ -738,8 +734,6 @@ static int __init mousedev_init(void) mousedev_mix.exist = 1; mousedev_mix.minor = MOUSEDEV_MIX; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), - S_IFCHR|S_IRUGO|S_IWUSR, "input/mice"); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); @@ -759,7 +753,6 @@ static void __exit mousedev_exit(void) if (psaux_registered) misc_deregister(&psaux_mouse); #endif - devfs_remove("input/mice"); class_device_destroy(input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX)); input_unregister_handler(&mousedev_handler); diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index fbb35c97551b..2d45e4df4163 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -53,7 +53,6 @@ #include #include #include -#include #ifndef CONFIG_INPUT_TSDEV_SCREEN_X #define CONFIG_INPUT_TSDEV_SCREEN_X 240 @@ -410,10 +409,6 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, tsdev_table[minor] = tsdev; - devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), - S_IFCHR|S_IRUGO|S_IWUSR, "input/ts%d", minor); - devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor + TSDEV_MINORS/2), - S_IFCHR|S_IRUGO|S_IWUSR, "input/tsraw%d", minor); class_device_create(input_class, NULL, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), dev->dev, "ts%d", minor); @@ -428,8 +423,6 @@ static void tsdev_disconnect(struct input_handle *handle) class_device_destroy(input_class, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); - devfs_remove("input/ts%d", tsdev->minor); - devfs_remove("input/tsraw%d", tsdev->minor); tsdev->exist = 0; if (tsdev->open) { -- GitLab From d19fbe8a763634395d4bef40fc88cdb61c4a6274 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:39 -0500 Subject: [PATCH 0567/1519] [PATCH] Input: prepare to sysfs integration Input: prepare to sysfs integration Add struct class_device to input_dev; add input_allocate_dev() to dynamically allocate input devices; dynamically allocated devices are automatically registered with sysfs. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 77 ++++++++++++++++++++++++++++++++++++++++--- include/linux/input.h | 24 +++++++++++++- 2 files changed, 95 insertions(+), 6 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index 072bbf528151..0e2e890c0988 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -27,6 +27,7 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Input core"); MODULE_LICENSE("GPL"); +EXPORT_SYMBOL(input_allocate_device); EXPORT_SYMBOL(input_register_device); EXPORT_SYMBOL(input_unregister_device); EXPORT_SYMBOL(input_register_handler); @@ -605,6 +606,56 @@ static inline int input_proc_init(void) { return 0; } static inline void input_proc_exit(void) { } #endif +static void input_dev_release(struct class_device *class_dev) +{ + struct input_dev *dev = to_input_dev(class_dev); + + kfree(dev); + module_put(THIS_MODULE); +} + +static struct class input_dev_class = { + .name = "input_dev", + .release = input_dev_release, +}; + +struct input_dev *input_allocate_device(void) +{ + struct input_dev *dev; + + dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL); + if (dev) { + dev->dynalloc = 1; + dev->cdev.class = &input_dev_class; + class_device_initialize(&dev->cdev); + INIT_LIST_HEAD(&dev->h_list); + INIT_LIST_HEAD(&dev->node); + } + + return dev; +} + +static void input_register_classdevice(struct input_dev *dev) +{ + static atomic_t input_no = ATOMIC_INIT(0); + const char *path; + + __module_get(THIS_MODULE); + + dev->dev = dev->cdev.dev; + + snprintf(dev->cdev.class_id, sizeof(dev->cdev.class_id), + "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1); + + path = kobject_get_path(&dev->cdev.class->subsys.kset.kobj, GFP_KERNEL); + printk(KERN_INFO "input: %s/%s as %s\n", + dev->name ? dev->name : "Unspecified device", + path ? path : "", dev->cdev.class_id); + kfree(path); + + class_device_add(&dev->cdev); +} + void input_register_device(struct input_dev *dev) { struct input_handle *handle; @@ -637,6 +688,10 @@ void input_register_device(struct input_dev *dev) if ((handle = handler->connect(handler, dev, id))) input_link_handle(handle); + + if (dev->dynalloc) + input_register_classdevice(dev); + #ifdef CONFIG_HOTPLUG input_call_hotplug("add", dev); #endif @@ -665,6 +720,9 @@ void input_unregister_device(struct input_dev *dev) list_del_init(&dev->node); + if (dev->dynalloc) + class_device_unregister(&dev->cdev); + input_wakeup_procfs_readers(); } @@ -753,26 +811,34 @@ static int __init input_init(void) { int err; + err = class_register(&input_dev_class); + if (err) { + printk(KERN_ERR "input: unable to register input_dev class\n"); + return err; + } + input_class = class_create(THIS_MODULE, "input"); if (IS_ERR(input_class)) { printk(KERN_ERR "input: unable to register input class\n"); - return PTR_ERR(input_class); + err = PTR_ERR(input_class); + goto fail1; } err = input_proc_init(); if (err) - goto fail1; + goto fail2; err = register_chrdev(INPUT_MAJOR, "input", &input_fops); if (err) { printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR); - goto fail2; + goto fail3; } return 0; - fail2: input_proc_exit(); - fail1: class_destroy(input_class); + fail3: input_proc_exit(); + fail2: class_destroy(input_class); + fail1: class_unregister(&input_dev_class); return err; } @@ -781,6 +847,7 @@ static void __exit input_exit(void) input_proc_exit(); unregister_chrdev(INPUT_MAJOR, "input"); class_destroy(input_class); + class_unregister(&input_dev_class); } subsys_initcall(input_init); diff --git a/include/linux/input.h b/include/linux/input.h index e8c296ff6257..3defa29a17d3 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -12,6 +12,7 @@ #ifdef __KERNEL__ #include #include +#include #else #include #include @@ -889,11 +890,15 @@ struct input_dev { struct semaphore sem; /* serializes open and close operations */ unsigned int users; - struct device *dev; + struct class_device cdev; + struct device *dev; /* will be removed soon */ + + int dynalloc; /* temporarily */ struct list_head h_list; struct list_head node; }; +#define to_input_dev(d) container_of(d, struct input_dev, cdev) /* * Structure for hotplug & device<->driver matching. @@ -984,6 +989,23 @@ static inline void init_input_dev(struct input_dev *dev) INIT_LIST_HEAD(&dev->node); } +struct input_dev *input_allocate_device(void); + +static inline void input_free_device(struct input_dev *dev) +{ + kfree(dev); +} + +static inline struct input_dev *input_get_device(struct input_dev *dev) +{ + return to_input_dev(class_device_get(&dev->cdev)); +} + +static inline void input_put_device(struct input_dev *dev) +{ + class_device_put(&dev->cdev); +} + void input_register_device(struct input_dev *); void input_unregister_device(struct input_dev *); -- GitLab From 2e5b636bb5f8dacbb91d08544e2c41ebcad5dace Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:44 -0500 Subject: [PATCH 0568/1519] [PATCH] drivers/input/mouse: convert to dynamic input_dev allocation Input: convert drivers/input/mouse to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/mouse/alps.c | 63 ++++++++++--------- drivers/input/mouse/alps.h | 2 +- drivers/input/mouse/amimouse.c | 49 ++++++++------- drivers/input/mouse/inport.c | 96 +++++++++++++++-------------- drivers/input/mouse/lifebook.c | 16 ++--- drivers/input/mouse/logibm.c | 88 +++++++++++++------------- drivers/input/mouse/logips2pp.c | 20 +++--- drivers/input/mouse/maplemouse.c | 10 +-- drivers/input/mouse/pc110pad.c | 64 ++++++++++--------- drivers/input/mouse/psmouse-base.c | 99 ++++++++++++++++-------------- drivers/input/mouse/psmouse.h | 2 +- drivers/input/mouse/rpcmouse.c | 43 +++++++------ drivers/input/mouse/sermouse.c | 82 ++++++++++++------------- drivers/input/mouse/synaptics.c | 6 +- drivers/input/mouse/vsxxxaa.c | 84 ++++++++++++------------- 15 files changed, 363 insertions(+), 361 deletions(-) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index b20783f9748a..4acc7fd4cd0f 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -79,8 +79,8 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; - struct input_dev *dev = &psmouse->dev; - struct input_dev *dev2 = &priv->dev2; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; int x, y, z, ges, fin, left, right, middle; int back = 0, forward = 0; @@ -379,20 +379,24 @@ static int alps_reconnect(struct psmouse *psmouse) static void alps_disconnect(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; + psmouse_reset(psmouse); - input_unregister_device(&priv->dev2); + input_unregister_device(priv->dev2); kfree(priv); } int alps_init(struct psmouse *psmouse) { struct alps_data *priv; + struct input_dev *dev1 = psmouse->dev, *dev2; int version; - psmouse->private = priv = kmalloc(sizeof(struct alps_data), GFP_KERNEL); - if (!priv) + psmouse->private = priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL); + dev2 = input_allocate_device(); + if (!priv || !dev2) goto init_fail; - memset(priv, 0, sizeof(struct alps_data)); + + priv->dev2 = dev2; if (!(priv->i = alps_get_model(psmouse, &version))) goto init_fail; @@ -411,41 +415,39 @@ int alps_init(struct psmouse *psmouse) if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0)) goto init_fail; - psmouse->dev.evbit[LONG(EV_KEY)] |= BIT(EV_KEY); - psmouse->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); - psmouse->dev.keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER); - psmouse->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); + dev1->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); + dev1->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER); + dev1->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - psmouse->dev.evbit[LONG(EV_ABS)] |= BIT(EV_ABS); - input_set_abs_params(&psmouse->dev, ABS_X, 0, 1023, 0, 0); - input_set_abs_params(&psmouse->dev, ABS_Y, 0, 767, 0, 0); - input_set_abs_params(&psmouse->dev, ABS_PRESSURE, 0, 127, 0, 0); + dev1->evbit[LONG(EV_ABS)] |= BIT(EV_ABS); + input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); if (priv->i->flags & ALPS_WHEEL) { - psmouse->dev.evbit[LONG(EV_REL)] |= BIT(EV_REL); - psmouse->dev.relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL); + dev1->evbit[LONG(EV_REL)] |= BIT(EV_REL); + dev1->relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL); } if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { - psmouse->dev.keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD); - psmouse->dev.keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK); + dev1->keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD); + dev1->keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK); } sprintf(priv->phys, "%s/input1", psmouse->ps2dev.serio->phys); - priv->dev2.phys = priv->phys; - priv->dev2.name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; - priv->dev2.id.bustype = BUS_I8042; - priv->dev2.id.vendor = 0x0002; - priv->dev2.id.product = PSMOUSE_ALPS; - priv->dev2.id.version = 0x0000; - - priv->dev2.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - priv->dev2.relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y); - priv->dev2.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + dev2->phys = priv->phys; + dev2->name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; + dev2->id.bustype = BUS_I8042; + dev2->id.vendor = 0x0002; + dev2->id.product = PSMOUSE_ALPS; + dev2->id.version = 0x0000; - input_register_device(&priv->dev2); + dev2->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + dev2->relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y); + dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - printk(KERN_INFO "input: %s on %s\n", priv->dev2.name, psmouse->ps2dev.serio->phys); + input_register_device(priv->dev2); psmouse->protocol_handler = alps_process_byte; psmouse->disconnect = alps_disconnect; @@ -455,6 +457,7 @@ int alps_init(struct psmouse *psmouse) return 0; init_fail: + input_free_device(dev2); kfree(priv); return -1; } diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index aba103dd65b7..e428f8d5d12e 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -22,7 +22,7 @@ struct alps_model_info { }; struct alps_data { - struct input_dev dev2; /* Relative device */ + struct input_dev *dev2; /* Relative device */ char name[32]; /* Name */ char phys[32]; /* Phys */ struct alps_model_info *i; /* Info */ diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index e994849efb8f..d13d4c8fe3c5 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -34,10 +34,7 @@ MODULE_DESCRIPTION("Amiga mouse driver"); MODULE_LICENSE("GPL"); static int amimouse_lastx, amimouse_lasty; -static struct input_dev amimouse_dev; - -static char *amimouse_name = "Amiga mouse"; -static char *amimouse_phys = "amimouse/input0"; +static struct input_dev *amimouse_dev; static irqreturn_t amimouse_interrupt(int irq, void *dummy, struct pt_regs *fp) { @@ -62,16 +59,16 @@ static irqreturn_t amimouse_interrupt(int irq, void *dummy, struct pt_regs *fp) potgor = custom.potgor; - input_regs(&amimouse_dev, fp); + input_regs(amimouse_dev, fp); - input_report_rel(&amimouse_dev, REL_X, dx); - input_report_rel(&amimouse_dev, REL_Y, dy); + input_report_rel(amimouse_dev, REL_X, dx); + input_report_rel(amimouse_dev, REL_Y, dy); - input_report_key(&amimouse_dev, BTN_LEFT, ciaa.pra & 0x40); - input_report_key(&amimouse_dev, BTN_MIDDLE, potgor & 0x0100); - input_report_key(&amimouse_dev, BTN_RIGHT, potgor & 0x0400); + input_report_key(amimouse_dev, BTN_LEFT, ciaa.pra & 0x40); + input_report_key(amimouse_dev, BTN_MIDDLE, potgor & 0x0100); + input_report_key(amimouse_dev, BTN_RIGHT, potgor & 0x0400); - input_sync(&amimouse_dev); + input_sync(amimouse_dev); return IRQ_HANDLED; } @@ -103,28 +100,30 @@ static int __init amimouse_init(void) if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE)) return -ENODEV; - amimouse_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - amimouse_dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - amimouse_dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - amimouse_dev.open = amimouse_open; - amimouse_dev.close = amimouse_close; + if (!(amimouse_dev = input_allocate_device())) + return -ENOMEM; + + amimouse_dev->name = "Amiga mouse"; + amimouse_dev->phys = "amimouse/input0"; + amimouse_dev->id.bustype = BUS_AMIGA; + amimouse_dev->id.vendor = 0x0001; + amimouse_dev->id.product = 0x0002; + amimouse_dev->id.version = 0x0100; - amimouse_dev.name = amimouse_name; - amimouse_dev.phys = amimouse_phys; - amimouse_dev.id.bustype = BUS_AMIGA; - amimouse_dev.id.vendor = 0x0001; - amimouse_dev.id.product = 0x0002; - amimouse_dev.id.version = 0x0100; + amimouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + amimouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + amimouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + amimouse_dev->open = amimouse_open; + amimouse_dev->close = amimouse_close; - input_register_device(&amimouse_dev); + input_register_device(amimouse_dev); - printk(KERN_INFO "input: %s at joy0dat\n", amimouse_name); return 0; } static void __exit amimouse_exit(void) { - input_unregister_device(&amimouse_dev); + input_unregister_device(amimouse_dev); } module_init(amimouse_init); diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c index 1f62c0134010..afc66f56df43 100644 --- a/drivers/input/mouse/inport.c +++ b/drivers/input/mouse/inport.c @@ -87,40 +87,7 @@ MODULE_PARM_DESC(irq, "IRQ number (5=default)"); __obsolete_setup("inport_irq="); -static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs); - -static int inport_open(struct input_dev *dev) -{ - if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL)) - return -EBUSY; - outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); - outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); - - return 0; -} - -static void inport_close(struct input_dev *dev) -{ - outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); - outb(INPORT_MODE_BASE, INPORT_DATA_PORT); - free_irq(inport_irq, NULL); -} - -static struct input_dev inport_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_REL) }, - .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) }, - .relbit = { BIT(REL_X) | BIT(REL_Y) }, - .open = inport_open, - .close = inport_close, - .name = INPORT_NAME, - .phys = "isa023c/input0", - .id = { - .bustype = BUS_ISA, - .vendor = INPORT_VENDOR, - .product = 0x0001, - .version = 0x0100, - }, -}; +static struct input_dev *inport_dev; static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -129,31 +96,48 @@ static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs) outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); - input_regs(&inport_dev, regs); + input_regs(inport_dev, regs); outb(INPORT_REG_X, INPORT_CONTROL_PORT); - input_report_rel(&inport_dev, REL_X, inb(INPORT_DATA_PORT)); + input_report_rel(inport_dev, REL_X, inb(INPORT_DATA_PORT)); outb(INPORT_REG_Y, INPORT_CONTROL_PORT); - input_report_rel(&inport_dev, REL_Y, inb(INPORT_DATA_PORT)); + input_report_rel(inport_dev, REL_Y, inb(INPORT_DATA_PORT)); outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT); buttons = inb(INPORT_DATA_PORT); - input_report_key(&inport_dev, BTN_MIDDLE, buttons & 1); - input_report_key(&inport_dev, BTN_LEFT, buttons & 2); - input_report_key(&inport_dev, BTN_RIGHT, buttons & 4); + input_report_key(inport_dev, BTN_MIDDLE, buttons & 1); + input_report_key(inport_dev, BTN_LEFT, buttons & 2); + input_report_key(inport_dev, BTN_RIGHT, buttons & 4); outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); - input_sync(&inport_dev); + input_sync(inport_dev); return IRQ_HANDLED; } +static int inport_open(struct input_dev *dev) +{ + if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL)) + return -EBUSY; + outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); + outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); + + return 0; +} + +static void inport_close(struct input_dev *dev) +{ + outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); + outb(INPORT_MODE_BASE, INPORT_DATA_PORT); + free_irq(inport_irq, NULL); +} + static int __init inport_init(void) { - unsigned char a,b,c; + unsigned char a, b, c; if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) { printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE); @@ -163,26 +147,44 @@ static int __init inport_init(void) a = inb(INPORT_SIGNATURE_PORT); b = inb(INPORT_SIGNATURE_PORT); c = inb(INPORT_SIGNATURE_PORT); - if (( a == b ) || ( a != c )) { + if (a == b || a != c) { release_region(INPORT_BASE, INPORT_EXTENT); printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE); return -ENODEV; } + if (!(inport_dev = input_allocate_device())) { + printk(KERN_ERR "inport.c: Not enough memory for input device\n"); + release_region(INPORT_BASE, INPORT_EXTENT); + return -ENOMEM; + } + + inport_dev->name = INPORT_NAME; + inport_dev->phys = "isa023c/input0"; + inport_dev->id.bustype = BUS_ISA; + inport_dev->id.vendor = INPORT_VENDOR; + inport_dev->id.product = 0x0001; + inport_dev->id.version = 0x0100; + + inport_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + inport_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + inport_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + + inport_dev->open = inport_open; + inport_dev->close = inport_close; + outb(INPORT_RESET, INPORT_CONTROL_PORT); outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_BASE, INPORT_DATA_PORT); - input_register_device(&inport_dev); - - printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n", INPORT_BASE, inport_irq); + input_register_device(inport_dev); return 0; } static void __exit inport_exit(void) { - input_unregister_device(&inport_dev); + input_unregister_device(inport_dev); release_region(INPORT_BASE, INPORT_EXTENT); } diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index bd9df9b28325..55991424ac91 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -34,7 +34,7 @@ static struct dmi_system_id lifebook_dmi_table[] = { static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse, struct pt_regs *regs) { unsigned char *packet = psmouse->packet; - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; if (psmouse->pktcnt != 3) return PSMOUSE_GOOD_DATA; @@ -113,15 +113,17 @@ int lifebook_detect(struct psmouse *psmouse, int set_properties) int lifebook_init(struct psmouse *psmouse) { + struct input_dev *input_dev = psmouse->dev; + if (lifebook_absolute_mode(psmouse)) return -1; - psmouse->dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL); - psmouse->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - psmouse->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - input_set_abs_params(&psmouse->dev, ABS_X, 0, 1024, 0, 0); - input_set_abs_params(&psmouse->dev, ABS_Y, 0, 1024, 0, 0); + input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_set_abs_params(input_dev, ABS_X, 0, 1024, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1024, 0, 0); psmouse->protocol_handler = lifebook_process_byte; psmouse->set_resolution = lifebook_set_resolution; diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c index 8b5243167227..9c7ce38806d7 100644 --- a/drivers/input/mouse/logibm.c +++ b/drivers/input/mouse/logibm.c @@ -77,39 +77,7 @@ MODULE_PARM_DESC(irq, "IRQ number (5=default)"); __obsolete_setup("logibm_irq="); -static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs); - -static int logibm_open(struct input_dev *dev) -{ - if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { - printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); - return -EBUSY; - } - outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); - return 0; -} - -static void logibm_close(struct input_dev *dev) -{ - outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); - free_irq(logibm_irq, NULL); -} - -static struct input_dev logibm_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_REL) }, - .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) }, - .relbit = { BIT(REL_X) | BIT(REL_Y) }, - .open = logibm_open, - .close = logibm_close, - .name = "Logitech bus mouse", - .phys = "isa023c/input0", - .id = { - .bustype = BUS_ISA, - .vendor = 0x0003, - .product = 0x0001, - .version = 0x0100, - }, -}; +static struct input_dev *logibm_dev; static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -127,18 +95,34 @@ static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs) dy |= (buttons & 0xf) << 4; buttons = ~buttons >> 5; - input_regs(&logibm_dev, regs); - input_report_rel(&logibm_dev, REL_X, dx); - input_report_rel(&logibm_dev, REL_Y, dy); - input_report_key(&logibm_dev, BTN_RIGHT, buttons & 1); - input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 2); - input_report_key(&logibm_dev, BTN_LEFT, buttons & 4); - input_sync(&logibm_dev); + input_regs(logibm_dev, regs); + input_report_rel(logibm_dev, REL_X, dx); + input_report_rel(logibm_dev, REL_Y, dy); + input_report_key(logibm_dev, BTN_RIGHT, buttons & 1); + input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2); + input_report_key(logibm_dev, BTN_LEFT, buttons & 4); + input_sync(logibm_dev); outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); return IRQ_HANDLED; } +static int logibm_open(struct input_dev *dev) +{ + if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { + printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); + return -EBUSY; + } + outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); + return 0; +} + +static void logibm_close(struct input_dev *dev) +{ + outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); + free_irq(logibm_irq, NULL); +} + static int __init logibm_init(void) { if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) { @@ -159,16 +143,34 @@ static int __init logibm_init(void) outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT); outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); - input_register_device(&logibm_dev); + if (!(logibm_dev = input_allocate_device())) { + printk(KERN_ERR "logibm.c: Not enough memory for input device\n"); + release_region(LOGIBM_BASE, LOGIBM_EXTENT); + return -ENOMEM; + } + + logibm_dev->name = "Logitech bus mouse"; + logibm_dev->phys = "isa023c/input0"; + logibm_dev->id.bustype = BUS_ISA; + logibm_dev->id.vendor = 0x0003; + logibm_dev->id.product = 0x0001; + logibm_dev->id.version = 0x0100; + + logibm_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + logibm_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + logibm_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + + logibm_dev->open = logibm_open; + logibm_dev->close = logibm_close; - printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq); + input_register_device(logibm_dev); return 0; } static void __exit logibm_exit(void) { - input_unregister_device(&logibm_dev); + input_unregister_device(logibm_dev); release_region(LOGIBM_BASE, LOGIBM_EXTENT); } diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index 7df96525222e..0f69ff46c1ae 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -40,7 +40,7 @@ struct ps2pp_info { static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse, struct pt_regs *regs) { - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; if (psmouse->pktcnt < 3) @@ -257,25 +257,27 @@ static struct ps2pp_info *get_model_info(unsigned char model) static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_info *model_info, int using_ps2pp) { + struct input_dev *input_dev = psmouse->dev; + if (model_info->features & PS2PP_SIDE_BTN) - set_bit(BTN_SIDE, psmouse->dev.keybit); + set_bit(BTN_SIDE, input_dev->keybit); if (model_info->features & PS2PP_EXTRA_BTN) - set_bit(BTN_EXTRA, psmouse->dev.keybit); + set_bit(BTN_EXTRA, input_dev->keybit); if (model_info->features & PS2PP_TASK_BTN) - set_bit(BTN_TASK, psmouse->dev.keybit); + set_bit(BTN_TASK, input_dev->keybit); if (model_info->features & PS2PP_NAV_BTN) { - set_bit(BTN_FORWARD, psmouse->dev.keybit); - set_bit(BTN_BACK, psmouse->dev.keybit); + set_bit(BTN_FORWARD, input_dev->keybit); + set_bit(BTN_BACK, input_dev->keybit); } if (model_info->features & PS2PP_WHEEL) - set_bit(REL_WHEEL, psmouse->dev.relbit); + set_bit(REL_WHEEL, input_dev->relbit); if (model_info->features & PS2PP_HWHEEL) - set_bit(REL_HWHEEL, psmouse->dev.relbit); + set_bit(REL_HWHEEL, input_dev->relbit); switch (model_info->kind) { case PS2PP_KIND_WHEEL: @@ -387,7 +389,7 @@ int ps2pp_init(struct psmouse *psmouse, int set_properties) } if (buttons < 3) - clear_bit(BTN_MIDDLE, psmouse->dev.keybit); + clear_bit(BTN_MIDDLE, psmouse->dev->keybit); if (model_info) ps2pp_set_model_properties(psmouse, model_info, use_ps2pp); diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c index e90c60cbbf05..b5b34fe4fee8 100644 --- a/drivers/input/mouse/maplemouse.c +++ b/drivers/input/mouse/maplemouse.c @@ -41,13 +41,12 @@ static int dc_mouse_connect(struct maple_device *dev) unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]); struct input_dev *input_dev; - if (!(input_dev = kmalloc(sizeof(struct input_dev), GFP_KERNEL))) - return -1; + dev->private_data = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; dev->private_data = input_dev; - memset(input_dev, 0, sizeof(struct dc_mouse)); - init_input_dev(input_dev); input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL); @@ -59,8 +58,6 @@ static int dc_mouse_connect(struct maple_device *dev) maple_getcond_callback(dev, dc_mouse_callback, 1, MAPLE_FUNC_MOUSE); - printk(KERN_INFO "input: mouse(0x%lx): %s\n", data, input_dev->name); - return 0; } @@ -70,7 +67,6 @@ static void dc_mouse_disconnect(struct maple_device *dev) struct input_dev *input_dev = dev->private_data; input_unregister_device(input_dev); - kfree(input_dev); } diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c index 93393d5c0078..d284ea712151 100644 --- a/drivers/input/mouse/pc110pad.c +++ b/drivers/input/mouse/pc110pad.c @@ -53,13 +53,10 @@ MODULE_LICENSE("GPL"); static int pc110pad_irq = 10; static int pc110pad_io = 0x15e0; -static struct input_dev pc110pad_dev; +static struct input_dev *pc110pad_dev; static int pc110pad_data[3]; static int pc110pad_count; -static char *pc110pad_name = "IBM PC110 TouchPad"; -static char *pc110pad_phys = "isa15e0/input0"; - static irqreturn_t pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs) { int value = inb_p(pc110pad_io); @@ -74,14 +71,14 @@ static irqreturn_t pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs) if (pc110pad_count < 3) return IRQ_HANDLED; - input_regs(&pc110pad_dev, regs); - input_report_key(&pc110pad_dev, BTN_TOUCH, + input_regs(pc110pad_dev, regs); + input_report_key(pc110pad_dev, BTN_TOUCH, pc110pad_data[0] & 0x01); - input_report_abs(&pc110pad_dev, ABS_X, + input_report_abs(pc110pad_dev, ABS_X, pc110pad_data[1] | ((pc110pad_data[0] << 3) & 0x80) | ((pc110pad_data[0] << 1) & 0x100)); - input_report_abs(&pc110pad_dev, ABS_Y, + input_report_abs(pc110pad_dev, ABS_Y, pc110pad_data[2] | ((pc110pad_data[0] << 4) & 0x80)); - input_sync(&pc110pad_dev); + input_sync(pc110pad_dev); pc110pad_count = 0; return IRQ_HANDLED; @@ -94,9 +91,9 @@ static void pc110pad_close(struct input_dev *dev) static int pc110pad_open(struct input_dev *dev) { - pc110pad_interrupt(0,NULL,NULL); - pc110pad_interrupt(0,NULL,NULL); - pc110pad_interrupt(0,NULL,NULL); + pc110pad_interrupt(0, NULL, NULL); + pc110pad_interrupt(0, NULL, NULL); + pc110pad_interrupt(0, NULL, NULL); outb(PC110PAD_ON, pc110pad_io + 2); pc110pad_count = 0; @@ -127,45 +124,46 @@ static int __init pc110pad_init(void) outb(PC110PAD_OFF, pc110pad_io + 2); - if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) - { + if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) { release_region(pc110pad_io, 4); printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq); return -EBUSY; } - pc110pad_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - pc110pad_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - pc110pad_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + if (!(pc110pad_dev = input_allocate_device())) { + free_irq(pc110pad_irq, NULL); + release_region(pc110pad_io, 4); + printk(KERN_ERR "pc110pad: Not enough memory.\n"); + return -ENOMEM; + } - pc110pad_dev.absmax[ABS_X] = 0x1ff; - pc110pad_dev.absmax[ABS_Y] = 0x0ff; + pc110pad_dev->name = "IBM PC110 TouchPad"; + pc110pad_dev->phys = "isa15e0/input0"; + pc110pad_dev->id.bustype = BUS_ISA; + pc110pad_dev->id.vendor = 0x0003; + pc110pad_dev->id.product = 0x0001; + pc110pad_dev->id.version = 0x0100; - pc110pad_dev.open = pc110pad_open; - pc110pad_dev.close = pc110pad_close; + pc110pad_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + pc110pad_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + pc110pad_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - pc110pad_dev.name = pc110pad_name; - pc110pad_dev.phys = pc110pad_phys; - pc110pad_dev.id.bustype = BUS_ISA; - pc110pad_dev.id.vendor = 0x0003; - pc110pad_dev.id.product = 0x0001; - pc110pad_dev.id.version = 0x0100; + pc110pad_dev->absmax[ABS_X] = 0x1ff; + pc110pad_dev->absmax[ABS_Y] = 0x0ff; - input_register_device(&pc110pad_dev); + pc110pad_dev->open = pc110pad_open; + pc110pad_dev->close = pc110pad_close; - printk(KERN_INFO "input: %s at %#x irq %d\n", - pc110pad_name, pc110pad_io, pc110pad_irq); + input_register_device(pc110pad_dev); return 0; } static void __exit pc110pad_exit(void) { - input_unregister_device(&pc110pad_dev); - outb(PC110PAD_OFF, pc110pad_io + 2); - free_irq(pc110pad_irq, NULL); + input_unregister_device(pc110pad_dev); release_region(pc110pad_io, 4); } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index af24313ff5bb..6ee9999a2eaa 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -114,7 +114,7 @@ struct psmouse_protocol { static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse, struct pt_regs *regs) { - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; if (psmouse->pktcnt < psmouse->pktsize) @@ -333,12 +333,11 @@ static int genius_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_EXTRA, psmouse->dev.keybit); - set_bit(BTN_SIDE, psmouse->dev.keybit); - set_bit(REL_WHEEL, psmouse->dev.relbit); + set_bit(BTN_EXTRA, psmouse->dev->keybit); + set_bit(BTN_SIDE, psmouse->dev->keybit); + set_bit(REL_WHEEL, psmouse->dev->relbit); psmouse->vendor = "Genius"; - psmouse->name = "Wheel Mouse"; psmouse->pktsize = 4; } @@ -365,8 +364,8 @@ static int intellimouse_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_MIDDLE, psmouse->dev.keybit); - set_bit(REL_WHEEL, psmouse->dev.relbit); + set_bit(BTN_MIDDLE, psmouse->dev->keybit); + set_bit(REL_WHEEL, psmouse->dev->relbit); if (!psmouse->vendor) psmouse->vendor = "Generic"; if (!psmouse->name) psmouse->name = "Wheel Mouse"; @@ -398,10 +397,10 @@ static int im_explorer_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_MIDDLE, psmouse->dev.keybit); - set_bit(REL_WHEEL, psmouse->dev.relbit); - set_bit(BTN_SIDE, psmouse->dev.keybit); - set_bit(BTN_EXTRA, psmouse->dev.keybit); + set_bit(BTN_MIDDLE, psmouse->dev->keybit); + set_bit(REL_WHEEL, psmouse->dev->relbit); + set_bit(BTN_SIDE, psmouse->dev->keybit); + set_bit(BTN_EXTRA, psmouse->dev->keybit); if (!psmouse->vendor) psmouse->vendor = "Generic"; if (!psmouse->name) psmouse->name = "Explorer Mouse"; @@ -433,7 +432,7 @@ static int thinking_detect(struct psmouse *psmouse, int set_properties) return -1; if (set_properties) { - set_bit(BTN_EXTRA, psmouse->dev.keybit); + set_bit(BTN_EXTRA, psmouse->dev->keybit); psmouse->vendor = "Kensington"; psmouse->name = "ThinkingMouse"; @@ -839,9 +838,9 @@ static void psmouse_disconnect(struct serio *serio) psmouse_set_state(psmouse, PSMOUSE_IGNORE); - input_unregister_device(&psmouse->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(psmouse->dev); kfree(psmouse); if (parent) @@ -852,16 +851,14 @@ static void psmouse_disconnect(struct serio *serio) static int psmouse_switch_protocol(struct psmouse *psmouse, struct psmouse_protocol *proto) { - memset(&psmouse->dev, 0, sizeof(struct input_dev)); + struct input_dev *input_dev = psmouse->dev; - init_input_dev(&psmouse->dev); + input_dev->private = psmouse; + input_dev->cdev.dev = &psmouse->ps2dev.serio->dev; - psmouse->dev.private = psmouse; - psmouse->dev.dev = &psmouse->ps2dev.serio->dev; - - psmouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - psmouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); psmouse->set_rate = psmouse_set_rate; psmouse->set_resolution = psmouse_set_resolution; @@ -883,12 +880,12 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, struct psmouse_proto sprintf(psmouse->devname, "%s %s %s", psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name); - psmouse->dev.name = psmouse->devname; - psmouse->dev.phys = psmouse->phys; - psmouse->dev.id.bustype = BUS_I8042; - psmouse->dev.id.vendor = 0x0002; - psmouse->dev.id.product = psmouse->type; - psmouse->dev.id.version = psmouse->model; + input_dev->name = psmouse->devname; + input_dev->phys = psmouse->phys; + input_dev->id.bustype = BUS_I8042; + input_dev->id.vendor = 0x0002; + input_dev->id.product = psmouse->type; + input_dev->id.version = psmouse->model; return 0; } @@ -900,7 +897,8 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, struct psmouse_proto static int psmouse_connect(struct serio *serio, struct serio_driver *drv) { struct psmouse *psmouse, *parent = NULL; - int retval; + struct input_dev *input_dev; + int retval = -ENOMEM; down(&psmouse_sem); @@ -913,12 +911,13 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) psmouse_deactivate(parent); } - if (!(psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL))) { - retval = -ENOMEM; + psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!psmouse || !input_dev) goto out; - } ps2_init(&psmouse->ps2dev, serio); + psmouse->dev = input_dev; sprintf(psmouse->phys, "%s/input0", serio->phys); psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); @@ -926,16 +925,11 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) serio_set_drvdata(serio, psmouse); retval = serio_open(serio, drv); - if (retval) { - serio_set_drvdata(serio, NULL); - kfree(psmouse); + if (retval) goto out; - } if (psmouse_probe(psmouse) < 0) { serio_close(serio); - serio_set_drvdata(serio, NULL); - kfree(psmouse); retval = -ENODEV; goto out; } @@ -947,13 +941,11 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) psmouse_switch_protocol(psmouse, NULL); - input_register_device(&psmouse->dev); - printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys); - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - psmouse_initialize(psmouse); + input_register_device(psmouse->dev); + if (parent && parent->pt_activate) parent->pt_activate(parent); @@ -964,6 +956,12 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) retval = 0; out: + if (retval) { + serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(psmouse); + } + /* If this is a pass-through port the parent needs to be re-activated */ if (parent) psmouse_activate(parent); @@ -1161,6 +1159,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co { struct serio *serio = psmouse->ps2dev.serio; struct psmouse *parent = NULL; + struct input_dev *new_dev; struct psmouse_protocol *proto; int retry = 0; @@ -1170,9 +1169,13 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co if (psmouse->type == proto->type) return count; + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + while (serio->child) { if (++retry > 3) { printk(KERN_WARNING "psmouse: failed to destroy child port, protocol change aborted.\n"); + input_free_device(new_dev); return -EIO; } @@ -1182,11 +1185,15 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co serio_pin_driver_uninterruptible(serio); down(&psmouse_sem); - if (serio->drv != &psmouse_drv) + if (serio->drv != &psmouse_drv) { + input_free_device(new_dev); return -ENODEV; + } - if (psmouse->type == proto->type) + if (psmouse->type == proto->type) { + input_free_device(new_dev); return count; /* switched by other thread */ + } } if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { @@ -1199,8 +1206,9 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co psmouse->disconnect(psmouse); psmouse_set_state(psmouse, PSMOUSE_IGNORE); - input_unregister_device(&psmouse->dev); + input_unregister_device(psmouse->dev); + psmouse->dev = new_dev; psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); if (psmouse_switch_protocol(psmouse, proto) < 0) { @@ -1212,8 +1220,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co psmouse_initialize(psmouse); psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); - input_register_device(&psmouse->dev); - printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys); + input_register_device(psmouse->dev); if (parent && parent->pt_activate) parent->pt_activate(parent); diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 45d2bd774f00..7c4192bd1279 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -36,7 +36,7 @@ typedef enum { struct psmouse { void *private; - struct input_dev dev; + struct input_dev *dev; struct ps2dev ps2dev; char *vendor; char *name; diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c index 8fe1212b8fd7..09b6ffdb7582 100644 --- a/drivers/input/mouse/rpcmouse.c +++ b/drivers/input/mouse/rpcmouse.c @@ -34,20 +34,7 @@ MODULE_DESCRIPTION("Acorn RiscPC mouse driver"); MODULE_LICENSE("GPL"); static short rpcmouse_lastx, rpcmouse_lasty; - -static struct input_dev rpcmouse_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_REL) }, - .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) }, - .relbit = { BIT(REL_X) | BIT(REL_Y) }, - .name = "Acorn RiscPC Mouse", - .phys = "rpcmouse/input0", - .id = { - .bustype = BUS_HOST, - .vendor = 0x0005, - .product = 0x0001, - .version = 0x0100, - }, -}; +static struct input_dev *rpcmouse_dev; static irqreturn_t rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs) { @@ -78,29 +65,41 @@ static irqreturn_t rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } + static int __init rpcmouse_init(void) { - init_input_dev(&rpcmouse_dev); + if (!(rpcmouse_dev = input_allocate_device())) + return -ENOMEM; + + rpcmouse_dev->name = "Acorn RiscPC Mouse"; + rpcmouse_dev->phys = "rpcmouse/input0"; + rpcmouse_dev->id.bustype = BUS_HOST; + rpcmouse_dev->id.vendor = 0x0005; + rpcmouse_dev->id.product = 0x0001; + rpcmouse_dev->id.version = 0x0100; + + rpcmouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + rpcmouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + rpcmouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); rpcmouse_lastx = (short) iomd_readl(IOMD_MOUSEX); rpcmouse_lasty = (short) iomd_readl(IOMD_MOUSEY); - if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", &rpcmouse_dev)) { + if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", rpcmouse_dev)) { printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n"); - return -1; + input_free_device(rpcmouse_dev); + return -EBUSY; } - input_register_device(&rpcmouse_dev); - - printk(KERN_INFO "input: Acorn RiscPC mouse\n"); + input_register_device(rpcmouse_dev); return 0; } static void __exit rpcmouse_exit(void) { - input_unregister_device(&rpcmouse_dev); - free_irq(IRQ_VSYNCPULSE, &rpcmouse_dev); + free_irq(IRQ_VSYNCPULSE, rpcmouse_dev); + input_unregister_device(rpcmouse_dev); } module_init(rpcmouse_init); diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c index d12b93ae3900..4bf584364d28 100644 --- a/drivers/input/mouse/sermouse.c +++ b/drivers/input/mouse/sermouse.c @@ -48,7 +48,7 @@ static char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse" "Logitech MZ++ Mouse"}; struct sermouse { - struct input_dev dev; + struct input_dev *dev; signed char buf[8]; unsigned char count; unsigned char type; @@ -64,7 +64,7 @@ struct sermouse { static void sermouse_process_msc(struct sermouse *sermouse, signed char data, struct pt_regs *regs) { - struct input_dev *dev = &sermouse->dev; + struct input_dev *dev = sermouse->dev; signed char *buf = sermouse->buf; input_regs(dev, regs); @@ -107,7 +107,7 @@ static void sermouse_process_msc(struct sermouse *sermouse, signed char data, st static void sermouse_process_ms(struct sermouse *sermouse, signed char data, struct pt_regs *regs) { - struct input_dev *dev = &sermouse->dev; + struct input_dev *dev = sermouse->dev; signed char *buf = sermouse->buf; if (data & 0x40) sermouse->count = 0; @@ -230,9 +230,9 @@ static void sermouse_disconnect(struct serio *serio) { struct sermouse *sermouse = serio_get_drvdata(serio); - input_unregister_device(&sermouse->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(sermouse->dev); kfree(sermouse); } @@ -244,56 +244,52 @@ static void sermouse_disconnect(struct serio *serio) static int sermouse_connect(struct serio *serio, struct serio_driver *drv) { struct sermouse *sermouse; - unsigned char c; - int err; + struct input_dev *input_dev; + unsigned char c = serio->id.extra; + int err = -ENOMEM; - if (!serio->id.proto || serio->id.proto > SERIO_MZPP) - return -ENODEV; - - if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL))) - return -ENOMEM; - - memset(sermouse, 0, sizeof(struct sermouse)); - - init_input_dev(&sermouse->dev); - sermouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); - sermouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - sermouse->dev.private = sermouse; - - sermouse->type = serio->id.proto; - c = serio->id.extra; - - if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit); - if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit); - if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit); - if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit); - if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit); + sermouse = kzalloc(sizeof(struct sermouse), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!sermouse || !input_dev) + goto fail; + sermouse->dev = input_dev; sprintf(sermouse->phys, "%s/input0", serio->phys); + sermouse->type = serio->id.proto; - sermouse->dev.name = sermouse_protocols[sermouse->type]; - sermouse->dev.phys = sermouse->phys; - sermouse->dev.id.bustype = BUS_RS232; - sermouse->dev.id.vendor = sermouse->type; - sermouse->dev.id.product = c; - sermouse->dev.id.version = 0x0100; - sermouse->dev.dev = &serio->dev; + input_dev->name = sermouse_protocols[sermouse->type]; + input_dev->phys = sermouse->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = sermouse->type; + input_dev->id.product = c; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->private = sermouse; + + if (c & 0x01) set_bit(BTN_MIDDLE, input_dev->keybit); + if (c & 0x02) set_bit(BTN_SIDE, input_dev->keybit); + if (c & 0x04) set_bit(BTN_EXTRA, input_dev->keybit); + if (c & 0x10) set_bit(REL_WHEEL, input_dev->relbit); + if (c & 0x20) set_bit(REL_HWHEEL, input_dev->relbit); serio_set_drvdata(serio, sermouse); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(sermouse); - return err; - } - - input_register_device(&sermouse->dev); + if (err) + goto fail; - printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys); + input_register_device(sermouse->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(sermouse); + return err; } static struct serio_device_id sermouse_serio_ids[] = { diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 029309422409..97cdfd6acaca 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -342,7 +342,7 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data */ static void synaptics_process_packet(struct psmouse *psmouse) { - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; struct synaptics_data *priv = psmouse->private; struct synaptics_hw_state hw; int num_fingers; @@ -473,7 +473,7 @@ static unsigned char synaptics_detect_pkt_type(struct psmouse *psmouse) static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse, struct pt_regs *regs) { - struct input_dev *dev = &psmouse->dev; + struct input_dev *dev = psmouse->dev; struct synaptics_data *priv = psmouse->private; input_regs(dev, regs); @@ -645,7 +645,7 @@ int synaptics_init(struct psmouse *psmouse) SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), priv->model_id, priv->capabilities, priv->ext_cap); - set_input_params(&psmouse->dev, priv); + set_input_params(psmouse->dev, priv); psmouse->protocol_handler = synaptics_process_byte; psmouse->set_rate = synaptics_set_rate; diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c index f024be9b44d2..36e9442a16b2 100644 --- a/drivers/input/mouse/vsxxxaa.c +++ b/drivers/input/mouse/vsxxxaa.c @@ -112,7 +112,7 @@ MODULE_LICENSE ("GPL"); struct vsxxxaa { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; #define BUFLEN 15 /* At least 5 is needed for a full tablet packet */ unsigned char buf[BUFLEN]; @@ -211,7 +211,7 @@ vsxxxaa_smells_like_packet (struct vsxxxaa *mouse, unsigned char type, size_t le static void vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse, struct pt_regs *regs) { - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; int left, middle, right; int dx, dy; @@ -269,7 +269,7 @@ vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse, struct pt_regs *regs) static void vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse, struct pt_regs *regs) { - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; int left, middle, right, touch; int x, y; @@ -323,7 +323,7 @@ vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse, struct pt_regs *regs) static void vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse, struct pt_regs *regs) { - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; unsigned char *buf = mouse->buf; int left, middle, right; unsigned char error; @@ -483,9 +483,9 @@ vsxxxaa_disconnect (struct serio *serio) { struct vsxxxaa *mouse = serio_get_drvdata (serio); - input_unregister_device (&mouse->dev); serio_close (serio); serio_set_drvdata (serio, NULL); + input_unregister_device (mouse->dev); kfree (mouse); } @@ -493,61 +493,57 @@ static int vsxxxaa_connect (struct serio *serio, struct serio_driver *drv) { struct vsxxxaa *mouse; - int err; + struct input_dev *input_dev; + int err = -ENOMEM; - if (!(mouse = kmalloc (sizeof (struct vsxxxaa), GFP_KERNEL))) - return -ENOMEM; - - memset (mouse, 0, sizeof (struct vsxxxaa)); - - init_input_dev (&mouse->dev); - set_bit (EV_KEY, mouse->dev.evbit); /* We have buttons */ - set_bit (EV_REL, mouse->dev.evbit); - set_bit (EV_ABS, mouse->dev.evbit); - set_bit (BTN_LEFT, mouse->dev.keybit); /* We have 3 buttons */ - set_bit (BTN_MIDDLE, mouse->dev.keybit); - set_bit (BTN_RIGHT, mouse->dev.keybit); - set_bit (BTN_TOUCH, mouse->dev.keybit); /* ...and Tablet */ - set_bit (REL_X, mouse->dev.relbit); - set_bit (REL_Y, mouse->dev.relbit); - set_bit (ABS_X, mouse->dev.absbit); - set_bit (ABS_Y, mouse->dev.absbit); - - mouse->dev.absmin[ABS_X] = 0; - mouse->dev.absmax[ABS_X] = 1023; - mouse->dev.absmin[ABS_Y] = 0; - mouse->dev.absmax[ABS_Y] = 1023; - - mouse->dev.private = mouse; + mouse = kzalloc (sizeof (struct vsxxxaa), GFP_KERNEL); + input_dev = input_allocate_device (); + if (!mouse || !input_dev) + goto fail; + mouse->dev = input_dev; + mouse->serio = serio; sprintf (mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer"); sprintf (mouse->phys, "%s/input0", serio->phys); - mouse->dev.name = mouse->name; - mouse->dev.phys = mouse->phys; - mouse->dev.id.bustype = BUS_RS232; - mouse->dev.dev = &serio->dev; - mouse->serio = serio; + + input_dev->name = mouse->name; + input_dev->phys = mouse->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->cdev.dev = &serio->dev; + input_dev->private = mouse; + + set_bit (EV_KEY, input_dev->evbit); /* We have buttons */ + set_bit (EV_REL, input_dev->evbit); + set_bit (EV_ABS, input_dev->evbit); + set_bit (BTN_LEFT, input_dev->keybit); /* We have 3 buttons */ + set_bit (BTN_MIDDLE, input_dev->keybit); + set_bit (BTN_RIGHT, input_dev->keybit); + set_bit (BTN_TOUCH, input_dev->keybit); /* ...and Tablet */ + set_bit (REL_X, input_dev->relbit); + set_bit (REL_Y, input_dev->relbit); + input_set_abs_params (input_dev, ABS_X, 0, 1023, 0, 0); + input_set_abs_params (input_dev, ABS_Y, 0, 1023, 0, 0); serio_set_drvdata (serio, mouse); err = serio_open (serio, drv); - if (err) { - serio_set_drvdata (serio, NULL); - kfree (mouse); - return err; - } + if (err) + goto fail; /* * Request selftest. Standard packet format and differential * mode will be requested after the device ID'ed successfully. */ - mouse->serio->write (mouse->serio, 'T'); /* Test */ - - input_register_device (&mouse->dev); + serio->write (serio, 'T'); /* Test */ - printk (KERN_INFO "input: %s on %s\n", mouse->name, mouse->phys); + input_register_device (input_dev); return 0; + + fail: serio_set_drvdata (serio, NULL); + input_free_device (input_dev); + kfree (mouse); + return err; } static struct serio_device_id vsxxaa_serio_ids[] = { -- GitLab From 3c42f0c3dde8feb59fc87df45cadb847d5511c0a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:45 -0500 Subject: [PATCH 0569/1519] [PATCH] drivers/input/keyboard: convert to dynamic input_dev allocation Input: convert drivers/input/keyboard to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/keyboard/amikbd.c | 59 +++++---- drivers/input/keyboard/atkbd.c | 188 +++++++++++++++------------- drivers/input/keyboard/corgikbd.c | 74 +++++------ drivers/input/keyboard/lkkbd.c | 128 +++++++++---------- drivers/input/keyboard/maple_keyb.c | 72 +++++------ drivers/input/keyboard/newtonkbd.c | 83 ++++++------ drivers/input/keyboard/spitzkbd.c | 79 +++++++----- drivers/input/keyboard/sunkbd.c | 117 +++++++++-------- drivers/input/keyboard/xtkbd.c | 80 ++++++------ 9 files changed, 449 insertions(+), 431 deletions(-) diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c index 4e8e8ea214ab..3d63bc1ad322 100644 --- a/drivers/input/keyboard/amikbd.c +++ b/drivers/input/keyboard/amikbd.c @@ -155,10 +155,7 @@ static const char *amikbd_messages[8] = { [7] = KERN_WARNING "amikbd: keyboard interrupt\n" }; -static struct input_dev amikbd_dev; - -static char *amikbd_name = "Amiga keyboard"; -static char *amikbd_phys = "amikbd/input0"; +static struct input_dev *amikbd_dev; static irqreturn_t amikbd_interrupt(int irq, void *dummy, struct pt_regs *fp) { @@ -176,16 +173,16 @@ static irqreturn_t amikbd_interrupt(int irq, void *dummy, struct pt_regs *fp) scancode = amikbd_keycode[scancode]; - input_regs(&amikbd_dev, fp); + input_regs(amikbd_dev, fp); if (scancode == KEY_CAPSLOCK) { /* CapsLock is a toggle switch key on Amiga */ - input_report_key(&amikbd_dev, scancode, 1); - input_report_key(&amikbd_dev, scancode, 0); - input_sync(&amikbd_dev); + input_report_key(amikbd_dev, scancode, 1); + input_report_key(amikbd_dev, scancode, 0); } else { - input_report_key(&amikbd_dev, scancode, down); - input_sync(&amikbd_dev); + input_report_key(amikbd_dev, scancode, down); } + + input_sync(amikbd_dev); } else /* scancodes >= 0x78 are error codes */ printk(amikbd_messages[scancode - 0x78]); @@ -202,39 +199,41 @@ static int __init amikbd_init(void) if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb")) return -EBUSY; - init_input_dev(&amikbd_dev); - - amikbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - amikbd_dev.keycode = amikbd_keycode; - amikbd_dev.keycodesize = sizeof(unsigned char); - amikbd_dev.keycodemax = ARRAY_SIZE(amikbd_keycode); + amikbd_dev = input_dev_allocate(); + if (!amikbd_dev) { + printk(KERN_ERR "amikbd: not enough memory for input device\n"); + release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100); + return -ENOMEM; + } + + amikbd_dev->name = "Amiga Keyboard"; + amikbd_dev->phys = "amikbd/input0"; + amikbd_dev->id.bustype = BUS_AMIGA; + amikbd_dev->id.vendor = 0x0001; + amikbd_dev->id.product = 0x0001; + amikbd_dev->id.version = 0x0100; + + amikbd_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + amikbd_dev->keycode = amikbd_keycode; + amikbd_dev->keycodesize = sizeof(unsigned char); + amikbd_dev->keycodemax = ARRAY_SIZE(amikbd_keycode); for (i = 0; i < 0x78; i++) if (amikbd_keycode[i]) - set_bit(amikbd_keycode[i], amikbd_dev.keybit); + set_bit(amikbd_keycode[i], amikbd_dev->keybit); ciaa.cra &= ~0x41; /* serial data in, turn off TA */ request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd", amikbd_interrupt); - amikbd_dev.name = amikbd_name; - amikbd_dev.phys = amikbd_phys; - amikbd_dev.id.bustype = BUS_AMIGA; - amikbd_dev.id.vendor = 0x0001; - amikbd_dev.id.product = 0x0001; - amikbd_dev.id.version = 0x0100; - - input_register_device(&amikbd_dev); - - printk(KERN_INFO "input: %s\n", amikbd_name); - + input_register_device(amikbd_dev); return 0; } static void __exit amikbd_exit(void) { - input_unregister_device(&amikbd_dev); free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt); - release_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100); + input_unregister_device(amikbd_dev); + release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100); } module_init(amikbd_init); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 1ad8c2ee7dbf..820c7fd9a604 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -185,12 +185,12 @@ static struct { struct atkbd { - struct ps2dev ps2dev; + struct ps2dev ps2dev; + struct input_dev *dev; /* Written only during init */ char name[64]; char phys[32]; - struct input_dev dev; unsigned short id; unsigned char keycode[512]; @@ -290,7 +290,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, if (!atkbd->enabled) goto out; - input_event(&atkbd->dev, EV_MSC, MSC_RAW, code); + input_event(atkbd->dev, EV_MSC, MSC_RAW, code); if (atkbd->translated) { @@ -326,10 +326,10 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, atkbd->release = 1; goto out; case ATKBD_RET_HANGUEL: - atkbd_report_key(&atkbd->dev, regs, KEY_HANGUEL, 3); + atkbd_report_key(atkbd->dev, regs, KEY_HANGUEL, 3); goto out; case ATKBD_RET_HANJA: - atkbd_report_key(&atkbd->dev, regs, KEY_HANJA, 3); + atkbd_report_key(atkbd->dev, regs, KEY_HANJA, 3); goto out; case ATKBD_RET_ERR: printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys); @@ -345,7 +345,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, } if (atkbd->keycode[code] != ATKBD_KEY_NULL) - input_event(&atkbd->dev, EV_MSC, MSC_SCAN, code); + input_event(atkbd->dev, EV_MSC, MSC_SCAN, code); switch (atkbd->keycode[code]) { case ATKBD_KEY_NULL: @@ -365,7 +365,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, "to make it known.\n", code & 0x80 ? "e0" : "", code & 0x7f); } - input_sync(&atkbd->dev); + input_sync(atkbd->dev); break; case ATKBD_SCR_1: scroll = 1 - atkbd->release * 2; @@ -390,7 +390,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, break; default: value = atkbd->release ? 0 : - (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev.key))); + (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev->key))); switch (value) { /* Workaround Toshiba laptop multiple keypress */ case 0: @@ -398,7 +398,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, break; case 1: atkbd->last = code; - atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev.rep[REP_DELAY]) / 2; + atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev->rep[REP_DELAY]) / 2; break; case 2: if (!time_after(jiffies, atkbd->time) && atkbd->last == code) @@ -406,16 +406,16 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, break; } - atkbd_report_key(&atkbd->dev, regs, atkbd->keycode[code], value); + atkbd_report_key(atkbd->dev, regs, atkbd->keycode[code], value); } if (atkbd->scroll) { - input_regs(&atkbd->dev, regs); + input_regs(atkbd->dev, regs); if (click != -1) - input_report_key(&atkbd->dev, BTN_MIDDLE, click); - input_report_rel(&atkbd->dev, REL_WHEEL, scroll); - input_report_rel(&atkbd->dev, REL_HWHEEL, hscroll); - input_sync(&atkbd->dev); + input_report_key(atkbd->dev, BTN_MIDDLE, click); + input_report_rel(atkbd->dev, REL_WHEEL, scroll); + input_report_rel(atkbd->dev, REL_HWHEEL, hscroll); + input_sync(atkbd->dev); } atkbd->release = 0; @@ -463,7 +463,6 @@ static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int co return 0; - case EV_REP: if (atkbd->softrepeat) return 0; @@ -693,7 +692,7 @@ static void atkbd_disconnect(struct serio *serio) device_remove_file(&serio->dev, &atkbd_attr_softrepeat); device_remove_file(&serio->dev, &atkbd_attr_softraw); - input_unregister_device(&atkbd->dev); + input_unregister_device(atkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(atkbd); @@ -701,7 +700,7 @@ static void atkbd_disconnect(struct serio *serio) /* - * atkbd_set_device_attrs() initializes keyboard's keycode table + * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -737,53 +736,58 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd) static void atkbd_set_device_attrs(struct atkbd *atkbd) { + struct input_dev *input_dev = atkbd->dev; int i; - memset(&atkbd->dev, 0, sizeof(struct input_dev)); + if (atkbd->extra) + sprintf(atkbd->name, "AT Set 2 Extra keyboard"); + else + sprintf(atkbd->name, "AT %s Set %d keyboard", + atkbd->translated ? "Translated" : "Raw", atkbd->set); - init_input_dev(&atkbd->dev); + sprintf(atkbd->phys, "%s/input0", atkbd->ps2dev.serio->phys); - atkbd->dev.name = atkbd->name; - atkbd->dev.phys = atkbd->phys; - atkbd->dev.id.bustype = BUS_I8042; - atkbd->dev.id.vendor = 0x0001; - atkbd->dev.id.product = atkbd->translated ? 1 : atkbd->set; - atkbd->dev.id.version = atkbd->id; - atkbd->dev.event = atkbd_event; - atkbd->dev.private = atkbd; - atkbd->dev.dev = &atkbd->ps2dev.serio->dev; + input_dev->name = atkbd->name; + input_dev->phys = atkbd->phys; + input_dev->id.bustype = BUS_I8042; + input_dev->id.vendor = 0x0001; + input_dev->id.product = atkbd->translated ? 1 : atkbd->set; + input_dev->id.version = atkbd->id; + input_dev->event = atkbd_event; + input_dev->private = atkbd; + input_dev->cdev.dev = &atkbd->ps2dev.serio->dev; - atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC); if (atkbd->write) { - atkbd->dev.evbit[0] |= BIT(EV_LED); - atkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL); + input_dev->evbit[0] |= BIT(EV_LED); + input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL); } if (atkbd->extra) - atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) | + input_dev->ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) | BIT(LED_SLEEP) | BIT(LED_MUTE) | BIT(LED_MISC); if (!atkbd->softrepeat) { - atkbd->dev.rep[REP_DELAY] = 250; - atkbd->dev.rep[REP_PERIOD] = 33; + input_dev->rep[REP_DELAY] = 250; + input_dev->rep[REP_PERIOD] = 33; } - atkbd->dev.mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN); + input_dev->mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN); if (atkbd->scroll) { - atkbd->dev.evbit[0] |= BIT(EV_REL); - atkbd->dev.relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL); - set_bit(BTN_MIDDLE, atkbd->dev.keybit); + input_dev->evbit[0] |= BIT(EV_REL); + input_dev->relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL); + set_bit(BTN_MIDDLE, input_dev->keybit); } - atkbd->dev.keycode = atkbd->keycode; - atkbd->dev.keycodesize = sizeof(unsigned char); - atkbd->dev.keycodemax = ARRAY_SIZE(atkbd_set2_keycode); + input_dev->keycode = atkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); for (i = 0; i < 512; i++) if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL) - set_bit(atkbd->keycode[i], atkbd->dev.keybit); + set_bit(atkbd->keycode[i], input_dev->keybit); } /* @@ -796,13 +800,15 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd) static int atkbd_connect(struct serio *serio, struct serio_driver *drv) { struct atkbd *atkbd; - int err; - - if (!(atkbd = kmalloc(sizeof(struct atkbd), GFP_KERNEL))) - return - ENOMEM; + struct input_dev *dev; + int err = -ENOMEM; - memset(atkbd, 0, sizeof(struct atkbd)); + atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL); + dev = input_allocate_device(); + if (!atkbd || !dev) + goto fail; + atkbd->dev = dev; ps2_init(&atkbd->ps2dev, serio); switch (serio->id.type) { @@ -828,19 +834,15 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) serio_set_drvdata(serio, atkbd); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(atkbd); - return err; - } + if (err) + goto fail; if (atkbd->write) { if (atkbd_probe(atkbd)) { serio_close(serio); - serio_set_drvdata(serio, NULL); - kfree(atkbd); - return -ENODEV; + err = -ENODEV; + goto fail; } atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); @@ -851,19 +853,9 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) atkbd->id = 0xab00; } - if (atkbd->extra) - sprintf(atkbd->name, "AT Set 2 Extra keyboard"); - else - sprintf(atkbd->name, "AT %s Set %d keyboard", - atkbd->translated ? "Translated" : "Raw", atkbd->set); - - sprintf(atkbd->phys, "%s/input0", serio->phys); - atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); - device_create_file(&serio->dev, &atkbd_attr_extra); device_create_file(&serio->dev, &atkbd_attr_scroll); device_create_file(&serio->dev, &atkbd_attr_set); @@ -872,9 +864,14 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) atkbd_enable(atkbd); - printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys); + input_register_device(atkbd->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(dev); + kfree(atkbd); + return err; } /* @@ -896,9 +893,9 @@ static int atkbd_reconnect(struct serio *serio) atkbd_disable(atkbd); if (atkbd->write) { - param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0) - | (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0) - | (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0); + param[0] = (test_bit(LED_SCROLLL, atkbd->dev->led) ? 1 : 0) + | (test_bit(LED_NUML, atkbd->dev->led) ? 2 : 0) + | (test_bit(LED_CAPSL, atkbd->dev->led) ? 4 : 0); if (atkbd_probe(atkbd)) return -1; @@ -1008,6 +1005,7 @@ static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1019,12 +1017,19 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun return -EINVAL; if (atkbd->extra != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + /* + * Since device's properties will change we need to + * unregister old device. But allocate new one first + * to make sure we have it. + */ + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, atkbd->set, value); atkbd_activate(atkbd); atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } return count; } @@ -1036,6 +1041,7 @@ static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1044,12 +1050,14 @@ static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t cou return -EINVAL; if (atkbd->scroll != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->scroll = value; atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } return count; } @@ -1061,6 +1069,7 @@ static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1072,13 +1081,15 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) return -EINVAL; if (atkbd->set != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); atkbd_activate(atkbd); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } return count; } @@ -1090,6 +1101,7 @@ static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1101,15 +1113,16 @@ static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t return -EINVAL; if (atkbd->softrepeat != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->softrepeat = value; if (atkbd->softrepeat) atkbd->softraw = 1; atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } - return count; } @@ -1121,6 +1134,7 @@ static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) { + struct input_dev *new_dev; unsigned long value; char *rest; @@ -1129,11 +1143,13 @@ static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t co return -EINVAL; if (atkbd->softraw != value) { - /* unregister device as it's properties will change */ - input_unregister_device(&atkbd->dev); + if (!(new_dev = input_allocate_device())) + return -ENOMEM; + input_unregister_device(atkbd->dev); + atkbd->dev = new_dev; atkbd->softraw = value; atkbd_set_device_attrs(atkbd); - input_register_device(&atkbd->dev); + input_register_device(atkbd->dev); } return count; } diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index cd4b6e795013..564bb365f6fc 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c @@ -70,8 +70,7 @@ static unsigned char corgikbd_keycode[NR_SCANCODES] = { struct corgikbd { unsigned char keycode[ARRAY_SIZE(corgikbd_keycode)]; - struct input_dev input; - char phys[32]; + struct input_dev *input; spinlock_t lock; struct timer_list timer; @@ -147,7 +146,7 @@ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs spin_lock_irqsave(&corgikbd_data->lock, flags); if (regs) - input_regs(&corgikbd_data->input, regs); + input_regs(corgikbd_data->input, regs); num_pressed = 0; for (col = 0; col < KB_COLS; col++) { @@ -169,14 +168,14 @@ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs scancode = SCANCODE(row, col); pressed = rowd & KB_ROWMASK(row); - input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], pressed); + input_report_key(corgikbd_data->input, corgikbd_data->keycode[scancode], pressed); if (pressed) num_pressed++; if (pressed && (corgikbd_data->keycode[scancode] == CORGI_KEY_OFF) && time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) { - input_event(&corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1); + input_event(corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1); corgikbd_data->suspend_jiffies=jiffies; } } @@ -185,7 +184,7 @@ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs corgikbd_activate_all(); - input_sync(&corgikbd_data->input); + input_sync(corgikbd_data->input); /* if any keys are pressed, enable the timer */ if (num_pressed) @@ -249,9 +248,9 @@ static void corgikbd_hinge_timer(unsigned long data) if (hinge_count >= HINGE_STABLE_COUNT) { spin_lock_irqsave(&corgikbd_data->lock, flags); - input_report_switch(&corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0)); - input_report_switch(&corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0)); - input_sync(&corgikbd_data->input); + input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0)); + input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0)); + input_sync(corgikbd_data->input); spin_unlock_irqrestore(&corgikbd_data->lock, flags); } @@ -287,16 +286,21 @@ static int corgikbd_resume(struct device *dev, uint32_t level) static int __init corgikbd_probe(struct device *dev) { - int i; struct corgikbd *corgikbd; + struct input_dev *input_dev; + int i; corgikbd = kzalloc(sizeof(struct corgikbd), GFP_KERNEL); - if (!corgikbd) + input_dev = input_allocate_device(); + if (!corgikbd || !input_dev) { + kfree(corgikbd); + input_free_device(input_dev); return -ENOMEM; + } - dev_set_drvdata(dev,corgikbd); - strcpy(corgikbd->phys, "corgikbd/input0"); + dev_set_drvdata(dev, corgikbd); + corgikbd->input = input_dev; spin_lock_init(&corgikbd->lock); /* Init Keyboard rescan timer */ @@ -311,28 +315,30 @@ static int __init corgikbd_probe(struct device *dev) corgikbd->suspend_jiffies=jiffies; - init_input_dev(&corgikbd->input); - corgikbd->input.private = corgikbd; - corgikbd->input.name = "Corgi Keyboard"; - corgikbd->input.dev = dev; - corgikbd->input.phys = corgikbd->phys; - corgikbd->input.id.bustype = BUS_HOST; - corgikbd->input.id.vendor = 0x0001; - corgikbd->input.id.product = 0x0001; - corgikbd->input.id.version = 0x0100; - corgikbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW); - corgikbd->input.keycode = corgikbd->keycode; - corgikbd->input.keycodesize = sizeof(unsigned char); - corgikbd->input.keycodemax = ARRAY_SIZE(corgikbd_keycode); - memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode)); + + input_dev->name = "Corgi Keyboard"; + input_dev->phys = "corgikbd/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = dev; + input_dev->private = corgikbd; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW); + input_dev->keycode = corgikbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode); + for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++) - set_bit(corgikbd->keycode[i], corgikbd->input.keybit); - clear_bit(0, corgikbd->input.keybit); - set_bit(SW_0, corgikbd->input.swbit); - set_bit(SW_1, corgikbd->input.swbit); + set_bit(corgikbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + set_bit(SW_0, input_dev->swbit); + set_bit(SW_1, input_dev->swbit); + + input_register_device(corgikbd->input); - input_register_device(&corgikbd->input); mod_timer(&corgikbd->htimer, jiffies + HINGE_SCAN_INTERVAL); /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ @@ -349,8 +355,6 @@ static int __init corgikbd_probe(struct device *dev) for (i = 0; i < CORGI_KEY_STROBE_NUM; i++) pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); - printk(KERN_INFO "input: Corgi Keyboard Registered\n"); - return 0; } @@ -365,7 +369,7 @@ static int corgikbd_remove(struct device *dev) del_timer_sync(&corgikbd->htimer); del_timer_sync(&corgikbd->timer); - input_unregister_device(&corgikbd->input); + input_unregister_device(corgikbd->input); kfree(corgikbd); diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c index 098963c7cdd6..7f06780a437f 100644 --- a/drivers/input/keyboard/lkkbd.c +++ b/drivers/input/keyboard/lkkbd.c @@ -102,7 +102,7 @@ static int ctrlclick_volume = 100; /* % */ module_param (ctrlclick_volume, int, 0); MODULE_PARM_DESC (ctrlclick_volume, "Ctrlclick volume (in %), default is 100%"); -static int lk201_compose_is_alt = 0; +static int lk201_compose_is_alt; module_param (lk201_compose_is_alt, int, 0); MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key " "will act as an Alt key"); @@ -274,7 +274,7 @@ static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = { }; #define CHECK_LED(LED, BITS) do { \ - if (test_bit (LED, lk->dev.led)) \ + if (test_bit (LED, lk->dev->led)) \ leds_on |= BITS; \ else \ leds_off |= BITS; \ @@ -287,7 +287,7 @@ struct lkkbd { lk_keycode_t keycode[LK_NUM_KEYCODES]; int ignore_bytes; unsigned char id[LK_NUM_IGNORE_BYTES]; - struct input_dev dev; + struct input_dev *dev; struct serio *serio; struct work_struct tq; char name[64]; @@ -423,8 +423,7 @@ lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags, DBG (KERN_INFO "Got byte 0x%02x\n", data); if (lk->ignore_bytes > 0) { - DBG (KERN_INFO "Ignoring a byte on %s\n", - lk->name); + DBG (KERN_INFO "Ignoring a byte on %s\n", lk->name); lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data; if (lk->ignore_bytes == 0) @@ -435,14 +434,14 @@ lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags, switch (data) { case LK_ALL_KEYS_UP: - input_regs (&lk->dev, regs); + input_regs (lk->dev, regs); for (i = 0; i < ARRAY_SIZE (lkkbd_keycode); i++) if (lk->keycode[i] != KEY_RESERVED) - input_report_key (&lk->dev, lk->keycode[i], 0); - input_sync (&lk->dev); + input_report_key (lk->dev, lk->keycode[i], 0); + input_sync (lk->dev); break; case LK_METRONOME: - DBG (KERN_INFO "Got LK_METRONOME and don't " + DBG (KERN_INFO "Got %#d and don't " "know how to handle...\n"); break; case LK_OUTPUT_ERROR: @@ -482,12 +481,12 @@ lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags, default: if (lk->keycode[data] != KEY_RESERVED) { - input_regs (&lk->dev, regs); - if (!test_bit (lk->keycode[data], lk->dev.key)) - input_report_key (&lk->dev, lk->keycode[data], 1); + input_regs (lk->dev, regs); + if (!test_bit (lk->keycode[data], lk->dev->key)) + input_report_key (lk->dev, lk->keycode[data], 1); else - input_report_key (&lk->dev, lk->keycode[data], 0); - input_sync (&lk->dev); + input_report_key (lk->dev, lk->keycode[data], 0); + input_sync (lk->dev); } else printk (KERN_WARNING "%s: Unknown key with " "scancode 0x%02x on %s.\n", @@ -605,7 +604,7 @@ lkkbd_reinit (void *data) lk->serio->write (lk->serio, volume_to_hw (lk->bell_volume)); /* Enable/disable keyclick (and possibly set volume) */ - if (test_bit (SND_CLICK, lk->dev.snd)) { + if (test_bit (SND_CLICK, lk->dev->snd)) { lk->serio->write (lk->serio, LK_CMD_ENABLE_KEYCLICK); lk->serio->write (lk->serio, volume_to_hw (lk->keyclick_volume)); lk->serio->write (lk->serio, LK_CMD_ENABLE_CTRCLICK); @@ -616,7 +615,7 @@ lkkbd_reinit (void *data) } /* Sound the bell if needed */ - if (test_bit (SND_BELL, lk->dev.snd)) + if (test_bit (SND_BELL, lk->dev->snd)) lk->serio->write (lk->serio, LK_CMD_SOUND_BELL); } @@ -627,71 +626,70 @@ static int lkkbd_connect (struct serio *serio, struct serio_driver *drv) { struct lkkbd *lk; + struct input_dev *input_dev; int i; int err; - if (!(lk = kmalloc (sizeof (struct lkkbd), GFP_KERNEL))) - return -ENOMEM; - - memset (lk, 0, sizeof (struct lkkbd)); - - init_input_dev (&lk->dev); - set_bit (EV_KEY, lk->dev.evbit); - set_bit (EV_LED, lk->dev.evbit); - set_bit (EV_SND, lk->dev.evbit); - set_bit (EV_REP, lk->dev.evbit); - set_bit (LED_CAPSL, lk->dev.ledbit); - set_bit (LED_SLEEP, lk->dev.ledbit); - set_bit (LED_COMPOSE, lk->dev.ledbit); - set_bit (LED_SCROLLL, lk->dev.ledbit); - set_bit (SND_BELL, lk->dev.sndbit); - set_bit (SND_CLICK, lk->dev.sndbit); + lk = kzalloc (sizeof (struct lkkbd), GFP_KERNEL); + input_dev = input_allocate_device (); + if (!lk || !input_dev) { + err = -ENOMEM; + goto fail; + } lk->serio = serio; - + lk->dev = input_dev; INIT_WORK (&lk->tq, lkkbd_reinit, lk); - lk->bell_volume = bell_volume; lk->keyclick_volume = keyclick_volume; lk->ctrlclick_volume = ctrlclick_volume; + memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES); - lk->dev.keycode = lk->keycode; - lk->dev.keycodesize = sizeof (lk_keycode_t); - lk->dev.keycodemax = LK_NUM_KEYCODES; - - lk->dev.event = lkkbd_event; - lk->dev.private = lk; + strlcpy (lk->name, "DEC LK keyboard", sizeof(lk->name)); + snprintf (lk->phys, sizeof(lk->phys), "%s/input0", serio->phys); + + input_dev->name = lk->name; + input_dev->phys = lk->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_LKKBD; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->event = lkkbd_event; + input_dev->private = lk; + + set_bit (EV_KEY, input_dev->evbit); + set_bit (EV_LED, input_dev->evbit); + set_bit (EV_SND, input_dev->evbit); + set_bit (EV_REP, input_dev->evbit); + set_bit (LED_CAPSL, input_dev->ledbit); + set_bit (LED_SLEEP, input_dev->ledbit); + set_bit (LED_COMPOSE, input_dev->ledbit); + set_bit (LED_SCROLLL, input_dev->ledbit); + set_bit (SND_BELL, input_dev->sndbit); + set_bit (SND_CLICK, input_dev->sndbit); + + input_dev->keycode = lk->keycode; + input_dev->keycodesize = sizeof (lk_keycode_t); + input_dev->keycodemax = LK_NUM_KEYCODES; + for (i = 0; i < LK_NUM_KEYCODES; i++) + set_bit (lk->keycode[i], input_dev->keybit); serio_set_drvdata (serio, lk); err = serio_open (serio, drv); - if (err) { - serio_set_drvdata (serio, NULL); - kfree (lk); - return err; - } + if (err) + goto fail; - sprintf (lk->name, "DEC LK keyboard"); - sprintf (lk->phys, "%s/input0", serio->phys); - - memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES); - for (i = 0; i < LK_NUM_KEYCODES; i++) - set_bit (lk->keycode[i], lk->dev.keybit); - - lk->dev.name = lk->name; - lk->dev.phys = lk->phys; - lk->dev.id.bustype = BUS_RS232; - lk->dev.id.vendor = SERIO_LKKBD; - lk->dev.id.product = 0; - lk->dev.id.version = 0x0100; - lk->dev.dev = &serio->dev; - - input_register_device (&lk->dev); - - printk (KERN_INFO "input: %s on %s, initiating reset\n", lk->name, serio->phys); + input_register_device (lk->dev); lk->serio->write (lk->serio, LK_CMD_POWERCYCLE_RESET); return 0; + + fail: serio_set_drvdata (serio, NULL); + input_free_device (input_dev); + kfree (lk); + return err; } /* @@ -702,9 +700,11 @@ lkkbd_disconnect (struct serio *serio) { struct lkkbd *lk = serio_get_drvdata (serio); - input_unregister_device (&lk->dev); + input_get_device (lk->dev); + input_unregister_device (lk->dev); serio_close (serio); serio_set_drvdata (serio, NULL); + input_put_device (lk->dev); kfree (lk); } diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index eecbde294f1f..cc6aaf9e85be 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -37,7 +37,7 @@ static unsigned char dc_kbd_keycode[256] = { struct dc_kbd { - struct input_dev dev; + struct input_dev *dev; unsigned char new[8]; unsigned char old[8]; }; @@ -46,30 +46,24 @@ struct dc_kbd { static void dc_scan_kbd(struct dc_kbd *kbd) { int i; - struct input_dev *dev = &kbd->dev; + struct input_dev *dev = kbd->dev; - for(i=0; i<8; i++) - input_report_key(dev, - dc_kbd_keycode[i+224], - (kbd->new[0]>>i)&1); + for (i = 0; i < 8; i++) + input_report_key(dev, dc_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1); - for(i=2; i<8; i++) { + for (i = 2; i < 8; i++) { - if(kbd->old[i]>3&&memscan(kbd->new+2, kbd->old[i], 6)==NULL) { - if(dc_kbd_keycode[kbd->old[i]]) - input_report_key(dev, - dc_kbd_keycode[kbd->old[i]], - 0); + if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == NULL) { + if (dc_kbd_keycode[kbd->old[i]]) + input_report_key(dev, dc_kbd_keycode[kbd->old[i]], 0); else printk("Unknown key (scancode %#x) released.", kbd->old[i]); } - if(kbd->new[i]>3&&memscan(kbd->old+2, kbd->new[i], 6)!=NULL) { + if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) != NULL) { if(dc_kbd_keycode[kbd->new[i]]) - input_report_key(dev, - dc_kbd_keycode[kbd->new[i]], - 1); + input_report_key(dev, dc_kbd_keycode[kbd->new[i]], 1); else printk("Unknown key (scancode %#x) pressed.", kbd->new[i]); @@ -89,43 +83,39 @@ static void dc_kbd_callback(struct mapleq *mq) unsigned long *buf = mq->recvbuf; if (buf[1] == mapledev->function) { - memcpy(kbd->new, buf+2, 8); + memcpy(kbd->new, buf + 2, 8); dc_scan_kbd(kbd); } } static int dc_kbd_connect(struct maple_device *dev) { - int i; - unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]); struct dc_kbd *kbd; + struct input_dev *input_dev; + unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]); + int i; - if (!(kbd = kmalloc(sizeof(struct dc_kbd), GFP_KERNEL))) - return -1; - memset(kbd, 0, sizeof(struct dc_kbd)); - - dev->private_data = kbd; - - kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - - init_input_dev(&kbd->dev); - - for (i=0; i<255; i++) - set_bit(dc_kbd_keycode[i], kbd->dev.keybit); - - clear_bit(0, kbd->dev.keybit); + dev->private_data = kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbd || !input_dev) { + kfree(kbd); + input_free_device(input_dev); + return -ENOMEM; + } - kbd->dev.private = kbd; + kbd->dev = input_dev; - kbd->dev.name = dev->product_name; - kbd->dev.id.bustype = BUS_MAPLE; + input_dev->name = dev->product_name; + input_dev->id.bustype = BUS_MAPLE; + input_dev->private = kbd; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + for (i = 0; i < 255; i++) + set_bit(dc_kbd_keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); - input_register_device(&kbd->dev); + input_register_device(kbd->dev); maple_getcond_callback(dev, dc_kbd_callback, 1, MAPLE_FUNC_KEYBOARD); - - printk(KERN_INFO "input: keyboard(0x%lx): %s\n", data, kbd->dev.name); - return 0; } @@ -134,7 +124,7 @@ static void dc_kbd_disconnect(struct maple_device *dev) { struct dc_kbd *kbd = dev->private_data; - input_unregister_device(&kbd->dev); + input_unregister_device(kbd->dev); kfree(kbd); } diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c index 2e8ce1613eec..d10983c521e6 100644 --- a/drivers/input/keyboard/newtonkbd.c +++ b/drivers/input/keyboard/newtonkbd.c @@ -57,11 +57,9 @@ static unsigned char nkbd_keycode[128] = { KEY_LEFT, KEY_RIGHT, KEY_DOWN, KEY_UP, 0 }; -static char *nkbd_name = "Newton Keyboard"; - struct nkbd { unsigned char keycode[128]; - struct input_dev dev; + struct input_dev *dev; struct serio *serio; char phys[32]; }; @@ -73,13 +71,13 @@ static irqreturn_t nkbd_interrupt(struct serio *serio, /* invalid scan codes are probably the init sequence, so we ignore them */ if (nkbd->keycode[data & NKBD_KEY]) { - input_regs(&nkbd->dev, regs); - input_report_key(&nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS); - input_sync(&nkbd->dev); + input_regs(nkbd->dev, regs); + input_report_key(nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS); + input_sync(nkbd->dev); } else if (data == 0xe7) /* end of init sequence */ - printk(KERN_INFO "input: %s on %s\n", nkbd_name, serio->phys); + printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys); return IRQ_HANDLED; } @@ -87,62 +85,59 @@ static irqreturn_t nkbd_interrupt(struct serio *serio, static int nkbd_connect(struct serio *serio, struct serio_driver *drv) { struct nkbd *nkbd; + struct input_dev *input_dev; + int err = -ENOMEM; int i; - int err; - - if (!(nkbd = kmalloc(sizeof(struct nkbd), GFP_KERNEL))) - return -ENOMEM; - - memset(nkbd, 0, sizeof(struct nkbd)); - nkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + nkbd = kzalloc(sizeof(struct nkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!nkbd || !input_dev) + goto fail; nkbd->serio = serio; + nkbd->dev = input_dev; + sprintf(nkbd->phys, "%s/input0", serio->phys); + memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode)); - init_input_dev(&nkbd->dev); - nkbd->dev.keycode = nkbd->keycode; - nkbd->dev.keycodesize = sizeof(unsigned char); - nkbd->dev.keycodemax = ARRAY_SIZE(nkbd_keycode); - nkbd->dev.private = nkbd; + input_dev->name = "Newton Keyboard"; + input_dev->phys = nkbd->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_NEWTON; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = nkbd; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + input_dev->keycode = nkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(nkbd_keycode); + for (i = 0; i < 128; i++) + set_bit(nkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); serio_set_drvdata(serio, nkbd); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(nkbd); - return err; - } - - memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode)); - for (i = 0; i < 128; i++) - set_bit(nkbd->keycode[i], nkbd->dev.keybit); - clear_bit(0, nkbd->dev.keybit); - - sprintf(nkbd->phys, "%s/input0", serio->phys); - - nkbd->dev.name = nkbd_name; - nkbd->dev.phys = nkbd->phys; - nkbd->dev.id.bustype = BUS_RS232; - nkbd->dev.id.vendor = SERIO_NEWTON; - nkbd->dev.id.product = 0x0001; - nkbd->dev.id.version = 0x0100; - nkbd->dev.dev = &serio->dev; - - input_register_device(&nkbd->dev); - - printk(KERN_INFO "input: %s on %s\n", nkbd_name, serio->phys); + if (err) + goto fail; + input_register_device(nkbd->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(nkbd); + return err; } static void nkbd_disconnect(struct serio *serio) { struct nkbd *nkbd = serio_get_drvdata(serio); - input_unregister_device(&nkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(nkbd->dev); kfree(nkbd); } diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 344f46005401..732fb310e487 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -85,7 +85,7 @@ static int spitz_senses[] = { struct spitzkbd { unsigned char keycode[ARRAY_SIZE(spitzkbd_keycode)]; - struct input_dev input; + struct input_dev *input; char phys[32]; spinlock_t lock; @@ -187,8 +187,7 @@ static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs spin_lock_irqsave(&spitzkbd_data->lock, flags); - if (regs) - input_regs(&spitzkbd_data->input, regs); + input_regs(spitzkbd_data->input, regs); num_pressed = 0; for (col = 0; col < KB_COLS; col++) { @@ -210,7 +209,7 @@ static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs scancode = SCANCODE(row, col); pressed = rowd & KB_ROWMASK(row); - input_report_key(&spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed); + input_report_key(spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed); if (pressed) num_pressed++; @@ -220,15 +219,15 @@ static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs spitzkbd_activate_all(); - input_report_key(&spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 ); - input_report_key(&spitzkbd_data->input, KEY_SUSPEND, pwrkey); + input_report_key(spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 ); + input_report_key(spitzkbd_data->input, KEY_SUSPEND, pwrkey); if (pwrkey && time_after(jiffies, spitzkbd_data->suspend_jiffies + msecs_to_jiffies(1000))) { - input_event(&spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1); + input_event(spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1); spitzkbd_data->suspend_jiffies = jiffies; } - input_sync(&spitzkbd_data->input); + input_sync(spitzkbd_data->input); /* if any keys are pressed, enable the timer */ if (num_pressed) @@ -259,6 +258,7 @@ static irqreturn_t spitzkbd_interrupt(int irq, void *dev_id, struct pt_regs *reg static void spitzkbd_timer_callback(unsigned long data) { struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data; + spitzkbd_scankeyboard(spitzkbd_data, NULL); } @@ -298,9 +298,9 @@ static void spitzkbd_hinge_timer(unsigned long data) if (hinge_count >= HINGE_STABLE_COUNT) { spin_lock_irqsave(&spitzkbd_data->lock, flags); - input_report_switch(&spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); - input_report_switch(&spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); - input_sync(&spitzkbd_data->input); + input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); + input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); + input_sync(spitzkbd_data->input); spin_unlock_irqrestore(&spitzkbd_data->lock, flags); } else { @@ -346,14 +346,21 @@ static int spitzkbd_resume(struct device *dev, uint32_t level) static int __init spitzkbd_probe(struct device *dev) { - int i; struct spitzkbd *spitzkbd; + struct input_dev *input_dev; + int i; spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL); if (!spitzkbd) return -ENOMEM; - dev_set_drvdata(dev,spitzkbd); + input_dev = input_allocate_device(); + if (!input_dev) { + kfree(spitzkbd); + return -ENOMEM; + } + + dev_set_drvdata(dev, spitzkbd); strcpy(spitzkbd->phys, "spitzkbd/input0"); spin_lock_init(&spitzkbd->lock); @@ -368,30 +375,34 @@ static int __init spitzkbd_probe(struct device *dev) spitzkbd->htimer.function = spitzkbd_hinge_timer; spitzkbd->htimer.data = (unsigned long) spitzkbd; - spitzkbd->suspend_jiffies=jiffies; - - init_input_dev(&spitzkbd->input); - spitzkbd->input.private = spitzkbd; - spitzkbd->input.name = "Spitz Keyboard"; - spitzkbd->input.dev = dev; - spitzkbd->input.phys = spitzkbd->phys; - spitzkbd->input.id.bustype = BUS_HOST; - spitzkbd->input.id.vendor = 0x0001; - spitzkbd->input.id.product = 0x0001; - spitzkbd->input.id.version = 0x0100; - spitzkbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW); - spitzkbd->input.keycode = spitzkbd->keycode; - spitzkbd->input.keycodesize = sizeof(unsigned char); - spitzkbd->input.keycodemax = ARRAY_SIZE(spitzkbd_keycode); + spitzkbd->suspend_jiffies = jiffies; + + spitzkbd->input = input_dev; + + input_dev->private = spitzkbd; + input_dev->name = "Spitz Keyboard"; + input_dev->phys = spitzkbd->phys; + input_dev->cdev.dev = dev; + + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW); + input_dev->keycode = spitzkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(spitzkbd_keycode); memcpy(spitzkbd->keycode, spitzkbd_keycode, sizeof(spitzkbd->keycode)); for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++) - set_bit(spitzkbd->keycode[i], spitzkbd->input.keybit); - clear_bit(0, spitzkbd->input.keybit); - set_bit(SW_0, spitzkbd->input.swbit); - set_bit(SW_1, spitzkbd->input.swbit); + set_bit(spitzkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + set_bit(SW_0, input_dev->swbit); + set_bit(SW_1, input_dev->swbit); + + input_register_device(input_dev); - input_register_device(&spitzkbd->input); mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ @@ -444,7 +455,7 @@ static int spitzkbd_remove(struct device *dev) del_timer_sync(&spitzkbd->htimer); del_timer_sync(&spitzkbd->timer); - input_unregister_device(&spitzkbd->input); + input_unregister_device(spitzkbd->input); kfree(spitzkbd); diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c index 4bae5d89348d..b15b6d8d4f83 100644 --- a/drivers/input/keyboard/sunkbd.c +++ b/drivers/input/keyboard/sunkbd.c @@ -76,13 +76,14 @@ static unsigned char sunkbd_keycode[128] = { struct sunkbd { unsigned char keycode[128]; - struct input_dev dev; + struct input_dev *dev; struct serio *serio; struct work_struct tq; wait_queue_head_t wait; char name[64]; char phys[32]; char type; + unsigned char enabled; volatile s8 reset; volatile s8 layout; }; @@ -124,10 +125,13 @@ static irqreturn_t sunkbd_interrupt(struct serio *serio, break; default: + if (!sunkbd->enabled) + break; + if (sunkbd->keycode[data & SUNKBD_KEY]) { - input_regs(&sunkbd->dev, regs); - input_report_key(&sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE)); - input_sync(&sunkbd->dev); + input_regs(sunkbd->dev, regs); + input_report_key(sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE)); + input_sync(sunkbd->dev); } else { printk(KERN_WARNING "sunkbd.c: Unknown key (scancode %#x) %s.\n", data & SUNKBD_KEY, data & SUNKBD_RELEASE ? "released" : "pressed"); @@ -184,7 +188,7 @@ static int sunkbd_initialize(struct sunkbd *sunkbd) sunkbd->reset = -2; sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_RESET); wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ); - if (sunkbd->reset <0) + if (sunkbd->reset < 0) return -1; sunkbd->type = sunkbd->reset; @@ -213,10 +217,17 @@ static void sunkbd_reinit(void *data) sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED); sunkbd->serio->write(sunkbd->serio, - (!!test_bit(LED_CAPSL, sunkbd->dev.led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev.led) << 2) | - (!!test_bit(LED_COMPOSE, sunkbd->dev.led) << 1) | !!test_bit(LED_NUML, sunkbd->dev.led)); - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev.snd)); - sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev.snd)); + (!!test_bit(LED_CAPSL, sunkbd->dev->led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) | + (!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) | !!test_bit(LED_NUML, sunkbd->dev->led)); + sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd)); + sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd)); +} + +static void sunkbd_enable(struct sunkbd *sunkbd, int enable) +{ + serio_pause_rx(sunkbd->serio); + sunkbd->enabled = 1; + serio_continue_rx(sunkbd->serio); } /* @@ -226,70 +237,64 @@ static void sunkbd_reinit(void *data) static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) { struct sunkbd *sunkbd; + struct input_dev *input_dev; + int err = -ENOMEM; int i; - int err; - - if (!(sunkbd = kmalloc(sizeof(struct sunkbd), GFP_KERNEL))) - return -ENOMEM; - memset(sunkbd, 0, sizeof(struct sunkbd)); - - init_input_dev(&sunkbd->dev); - init_waitqueue_head(&sunkbd->wait); - - sunkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP); - sunkbd->dev.ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML); - sunkbd->dev.sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL); + sunkbd = kzalloc(sizeof(struct sunkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!sunkbd || !input_dev) + goto fail; sunkbd->serio = serio; - + sunkbd->dev = input_dev; + init_waitqueue_head(&sunkbd->wait); INIT_WORK(&sunkbd->tq, sunkbd_reinit, sunkbd); - - sunkbd->dev.keycode = sunkbd->keycode; - sunkbd->dev.keycodesize = sizeof(unsigned char); - sunkbd->dev.keycodemax = ARRAY_SIZE(sunkbd_keycode); - - sunkbd->dev.event = sunkbd_event; - sunkbd->dev.private = sunkbd; + snprintf(sunkbd->phys, sizeof(sunkbd->phys), "%s/input0", serio->phys); serio_set_drvdata(serio, sunkbd); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(sunkbd); - return err; - } + if (err) + goto fail; if (sunkbd_initialize(sunkbd) < 0) { serio_close(serio); - serio_set_drvdata(serio, NULL); - kfree(sunkbd); - return -ENODEV; + goto fail; } sprintf(sunkbd->name, "Sun Type %d keyboard", sunkbd->type); - memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode)); - for (i = 0; i < 128; i++) - set_bit(sunkbd->keycode[i], sunkbd->dev.keybit); - clear_bit(0, sunkbd->dev.keybit); - - sprintf(sunkbd->phys, "%s/input0", serio->phys); - - sunkbd->dev.name = sunkbd->name; - sunkbd->dev.phys = sunkbd->phys; - sunkbd->dev.id.bustype = BUS_RS232; - sunkbd->dev.id.vendor = SERIO_SUNKBD; - sunkbd->dev.id.product = sunkbd->type; - sunkbd->dev.id.version = 0x0100; - sunkbd->dev.dev = &serio->dev; - input_register_device(&sunkbd->dev); - - printk(KERN_INFO "input: %s on %s\n", sunkbd->name, serio->phys); + input_dev->name = sunkbd->name; + input_dev->phys = sunkbd->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_SUNKBD; + input_dev->id.product = sunkbd->type; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = sunkbd; + input_dev->event = sunkbd_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP); + input_dev->ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML); + input_dev->sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL); + + input_dev->keycode = sunkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(sunkbd_keycode); + for (i = 0; i < 128; i++) + set_bit(sunkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + sunkbd_enable(sunkbd, 1); + input_register_device(sunkbd->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(sunkbd); + return err; } /* @@ -299,7 +304,9 @@ static int sunkbd_connect(struct serio *serio, struct serio_driver *drv) static void sunkbd_disconnect(struct serio *serio) { struct sunkbd *sunkbd = serio_get_drvdata(serio); - input_unregister_device(&sunkbd->dev); + + sunkbd_enable(sunkbd, 0); + input_unregister_device(sunkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(sunkbd); diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c index 19eaec7789d1..4135e3e16c51 100644 --- a/drivers/input/keyboard/xtkbd.c +++ b/drivers/input/keyboard/xtkbd.c @@ -56,11 +56,9 @@ static unsigned char xtkbd_keycode[256] = { 106 }; -static char *xtkbd_name = "XT Keyboard"; - struct xtkbd { unsigned char keycode[256]; - struct input_dev dev; + struct input_dev *dev; struct serio *serio; char phys[32]; }; @@ -77,9 +75,9 @@ static irqreturn_t xtkbd_interrupt(struct serio *serio, default: if (xtkbd->keycode[data & XTKBD_KEY]) { - input_regs(&xtkbd->dev, regs); - input_report_key(&xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE)); - input_sync(&xtkbd->dev); + input_regs(xtkbd->dev, regs); + input_report_key(xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE)); + input_sync(xtkbd->dev); } else { printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n", data & XTKBD_KEY, data & XTKBD_RELEASE ? "released" : "pressed"); @@ -91,62 +89,60 @@ static irqreturn_t xtkbd_interrupt(struct serio *serio, static int xtkbd_connect(struct serio *serio, struct serio_driver *drv) { struct xtkbd *xtkbd; + struct input_dev *input_dev; + int err = -ENOMEM; int i; - int err; - - if (!(xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL))) - return -ENOMEM; - - memset(xtkbd, 0, sizeof(struct xtkbd)); - xtkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!xtkbd || !input_dev) + goto fail; xtkbd->serio = serio; + xtkbd->dev = input_dev; + sprintf(xtkbd->phys, "%s/input0", serio->phys); + memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode)); - init_input_dev(&xtkbd->dev); - xtkbd->dev.keycode = xtkbd->keycode; - xtkbd->dev.keycodesize = sizeof(unsigned char); - xtkbd->dev.keycodemax = ARRAY_SIZE(xtkbd_keycode); - xtkbd->dev.private = xtkbd; - - serio_set_drvdata(serio, xtkbd); + input_dev->name = "XT Keyboard"; + input_dev->phys = xtkbd->phys; + input_dev->id.bustype = BUS_XTKBD; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = xtkbd; - err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(xtkbd); - return err; - } + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + input_dev->keycode = xtkbd->keycode; + input_dev->keycodesize = sizeof(unsigned char); + input_dev->keycodemax = ARRAY_SIZE(xtkbd_keycode); - memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode)); for (i = 0; i < 255; i++) - set_bit(xtkbd->keycode[i], xtkbd->dev.keybit); - clear_bit(0, xtkbd->dev.keybit); - - sprintf(xtkbd->phys, "%s/input0", serio->phys); - - xtkbd->dev.name = xtkbd_name; - xtkbd->dev.phys = xtkbd->phys; - xtkbd->dev.id.bustype = BUS_XTKBD; - xtkbd->dev.id.vendor = 0x0001; - xtkbd->dev.id.product = 0x0001; - xtkbd->dev.id.version = 0x0100; - xtkbd->dev.dev = &serio->dev; + set_bit(xtkbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); - input_register_device(&xtkbd->dev); + serio_set_drvdata(serio, xtkbd); - printk(KERN_INFO "input: %s on %s\n", xtkbd_name, serio->phys); + err = serio_open(serio, drv); + if (err) + goto fail; + input_register_device(xtkbd->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(xtkbd); + return err; } static void xtkbd_disconnect(struct serio *serio) { struct xtkbd *xtkbd = serio_get_drvdata(serio); - input_unregister_device(&xtkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(xtkbd->dev); kfree(xtkbd); } -- GitLab From c5b7c7c395a34f12cdf246d66c1feeff2933d584 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:47 -0500 Subject: [PATCH 0570/1519] [PATCH] drivers/usb/input: convert to dynamic input_dev allocation Input: convert drivers/iusb/input to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/acecad.c | 76 ++++++----- drivers/usb/input/aiptek.c | 209 +++++++++++++--------------- drivers/usb/input/appletouch.c | 130 +++++++++--------- drivers/usb/input/ati_remote.c | 173 ++++++++++++------------ drivers/usb/input/hid-core.c | 51 +++---- drivers/usb/input/hid-input.c | 56 ++++---- drivers/usb/input/hid-lgff.c | 17 +-- drivers/usb/input/hid-tmff.c | 11 +- drivers/usb/input/hid.h | 2 +- drivers/usb/input/itmtouch.c | 70 ++++++---- drivers/usb/input/kbtab.c | 82 +++++------ drivers/usb/input/keyspan_remote.c | 210 ++++++++++++----------------- drivers/usb/input/mtouchusb.c | 111 ++++++++------- drivers/usb/input/pid.c | 12 +- drivers/usb/input/powermate.c | 136 ++++++++++--------- drivers/usb/input/touchkitusb.c | 116 ++++++++-------- drivers/usb/input/usbkbd.c | 105 ++++++++------- drivers/usb/input/usbmouse.c | 93 +++++++------ drivers/usb/input/wacom.c | 142 +++++++++---------- drivers/usb/input/xpad.c | 95 ++++++------- drivers/usb/input/yealink.c | 66 ++++----- 21 files changed, 961 insertions(+), 1002 deletions(-) diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c index 74f8760d7c07..a32558b4048e 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/usb/input/acecad.c @@ -53,7 +53,7 @@ struct usb_acecad { char name[128]; char phys[64]; struct usb_device *usbdev; - struct input_dev dev; + struct input_dev *input; struct urb *irq; signed char *data; @@ -64,7 +64,7 @@ static void usb_acecad_irq(struct urb *urb, struct pt_regs *regs) { struct usb_acecad *acecad = urb->context; unsigned char *data = acecad->data; - struct input_dev *dev = &acecad->dev; + struct input_dev *dev = acecad->input; int prox, status; switch (urb->status) { @@ -135,8 +135,8 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ struct usb_host_interface *interface = intf->cur_altsetting; struct usb_endpoint_descriptor *endpoint; struct usb_acecad *acecad; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; if (interface->desc.bNumEndpoints != 1) return -ENODEV; @@ -153,8 +153,9 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL); - if (!acecad) - return -ENOMEM; + input_dev = input_allocate_device(); + if (!acecad || !input_dev) + goto fail1; acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma); if (!acecad->data) @@ -164,6 +165,9 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ if (!acecad->irq) goto fail2; + acecad->usbdev = dev; + acecad->input = input_dev; + if (dev->manufacturer) strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name)); @@ -173,48 +177,48 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ strlcat(acecad->name, dev->product, sizeof(acecad->name)); } - usb_make_path(dev, path, sizeof(path)); - snprintf(acecad->phys, sizeof(acecad->phys), "%s/input0", path); + usb_make_path(dev, acecad->phys, sizeof(acecad->phys)); + strlcat(acecad->phys, "/input0", sizeof(acecad->phys)); - acecad->usbdev = dev; + input_dev->name = acecad->name; + input_dev->phys = acecad->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = acecad; - acecad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - acecad->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - acecad->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - acecad->dev.keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2); + input_dev->open = usb_acecad_open; + input_dev->close = usb_acecad_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2); switch (id->driver_info) { case 0: - acecad->dev.absmax[ABS_X] = 5000; - acecad->dev.absmax[ABS_Y] = 3750; - acecad->dev.absmax[ABS_PRESSURE] = 512; + input_dev->absmax[ABS_X] = 5000; + input_dev->absmax[ABS_Y] = 3750; + input_dev->absmax[ABS_PRESSURE] = 512; if (!strlen(acecad->name)) snprintf(acecad->name, sizeof(acecad->name), "USB Acecad Flair Tablet %04x:%04x", - dev->descriptor.idVendor, dev->descriptor.idProduct); + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); break; case 1: - acecad->dev.absmax[ABS_X] = 3000; - acecad->dev.absmax[ABS_Y] = 2250; - acecad->dev.absmax[ABS_PRESSURE] = 1024; + input_dev->absmax[ABS_X] = 3000; + input_dev->absmax[ABS_Y] = 2250; + input_dev->absmax[ABS_PRESSURE] = 1024; if (!strlen(acecad->name)) snprintf(acecad->name, sizeof(acecad->name), "USB Acecad 302 Tablet %04x:%04x", - dev->descriptor.idVendor, dev->descriptor.idProduct); + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); break; } - acecad->dev.absfuzz[ABS_X] = 4; - acecad->dev.absfuzz[ABS_Y] = 4; - - acecad->dev.private = acecad; - acecad->dev.open = usb_acecad_open; - acecad->dev.close = usb_acecad_close; - - acecad->dev.name = acecad->name; - acecad->dev.phys = acecad->phys; - usb_to_input_id(dev, &acecad->dev.id); - acecad->dev.dev = &intf->dev; + input_dev->absfuzz[ABS_X] = 4; + input_dev->absfuzz[ABS_Y] = 4; usb_fill_int_urb(acecad->irq, dev, pipe, acecad->data, maxp > 8 ? 8 : maxp, @@ -222,17 +226,15 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_ acecad->irq->transfer_dma = acecad->data_dma; acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&acecad->dev); - - printk(KERN_INFO "input: %s with packet size %d on %s\n", - acecad->name, maxp, path); + input_register_device(acecad->input); usb_set_intfdata(intf, acecad); return 0; fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma); - fail1: kfree(acecad); + fail1: input_free_device(input_dev); + kfree(acecad); return -ENOMEM; } @@ -243,7 +245,7 @@ static void usb_acecad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (acecad) { usb_kill_urb(acecad->irq); - input_unregister_device(&acecad->dev); + input_unregister_device(acecad->input); usb_free_urb(acecad->irq); usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma); kfree(acecad); diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index cd0cbfe20723..1c5205321d83 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -317,7 +317,7 @@ struct aiptek_settings { }; struct aiptek { - struct input_dev inputdev; /* input device struct */ + struct input_dev *inputdev; /* input device struct */ struct usb_device *usbdev; /* usb device struct */ struct urb *urb; /* urb for incoming reports */ dma_addr_t data_dma; /* our dma stuffage */ @@ -402,7 +402,7 @@ static void aiptek_irq(struct urb *urb, struct pt_regs *regs) { struct aiptek *aiptek = urb->context; unsigned char *data = aiptek->data; - struct input_dev *inputdev = &aiptek->inputdev; + struct input_dev *inputdev = aiptek->inputdev; int jitterable = 0; int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck; @@ -955,20 +955,20 @@ static int aiptek_program_tablet(struct aiptek *aiptek) /* Query getXextension */ if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0) return ret; - aiptek->inputdev.absmin[ABS_X] = 0; - aiptek->inputdev.absmax[ABS_X] = ret - 1; + aiptek->inputdev->absmin[ABS_X] = 0; + aiptek->inputdev->absmax[ABS_X] = ret - 1; /* Query getYextension */ if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0) return ret; - aiptek->inputdev.absmin[ABS_Y] = 0; - aiptek->inputdev.absmax[ABS_Y] = ret - 1; + aiptek->inputdev->absmin[ABS_Y] = 0; + aiptek->inputdev->absmax[ABS_Y] = ret - 1; /* Query getPressureLevels */ if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0) return ret; - aiptek->inputdev.absmin[ABS_PRESSURE] = 0; - aiptek->inputdev.absmax[ABS_PRESSURE] = ret - 1; + aiptek->inputdev->absmin[ABS_PRESSURE] = 0; + aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1; /* Depending on whether we are in absolute or relative mode, we will * do a switchToTablet(absolute) or switchToMouse(relative) command. @@ -1025,8 +1025,8 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr return 0; return snprintf(buf, PAGE_SIZE, "%dx%d\n", - aiptek->inputdev.absmax[ABS_X] + 1, - aiptek->inputdev.absmax[ABS_Y] + 1); + aiptek->inputdev->absmax[ABS_X] + 1, + aiptek->inputdev->absmax[ABS_Y] + 1); } /* These structs define the sysfs files, param #1 is the name of the @@ -1048,7 +1048,7 @@ static ssize_t show_tabletProductId(struct device *dev, struct device_attribute return 0; return snprintf(buf, PAGE_SIZE, "0x%04x\n", - aiptek->inputdev.id.product); + aiptek->inputdev->id.product); } static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL); @@ -1063,7 +1063,7 @@ static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute * if (aiptek == NULL) return 0; - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev.id.vendor); + return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor); } static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL); @@ -1977,7 +1977,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) struct input_dev *inputdev; struct input_handle *inputhandle; struct list_head *node, *next; - char path[64 + 1]; int i; int speeds[] = { 0, AIPTEK_PROGRAMMABLE_DELAY_50, @@ -1996,24 +1995,26 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) */ speeds[0] = programmableDelay; - if ((aiptek = kmalloc(sizeof(struct aiptek), GFP_KERNEL)) == NULL) - return -ENOMEM; - memset(aiptek, 0, sizeof(struct aiptek)); + aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL); + inputdev = input_allocate_device(); + if (!aiptek || !inputdev) + goto fail1; aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH, SLAB_ATOMIC, &aiptek->data_dma); - if (aiptek->data == NULL) { - kfree(aiptek); - return -ENOMEM; - } + if (!aiptek->data) + goto fail1; aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); - if (aiptek->urb == NULL) { - usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, - aiptek->data_dma); - kfree(aiptek); - return -ENOMEM; - } + if (!aiptek->urb) + goto fail2; + + aiptek->inputdev = inputdev; + aiptek->usbdev = usbdev; + aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; + aiptek->inDelay = 0; + aiptek->endDelay = 0; + aiptek->previousJitterable = 0; /* Set up the curSettings struct. Said struct contains the current * programmable parameters. The newSetting struct contains changes @@ -2036,31 +2037,48 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Both structs should have equivalent settings */ - memcpy(&aiptek->newSetting, &aiptek->curSetting, - sizeof(struct aiptek_settings)); + aiptek->newSetting = aiptek->curSetting; + + /* Determine the usb devices' physical path. + * Asketh not why we always pretend we're using "../input0", + * but I suspect this will have to be refactored one + * day if a single USB device can be a keyboard & a mouse + * & a tablet, and the inputX number actually will tell + * us something... + */ + usb_make_path(usbdev, aiptek->features.usbPath, + sizeof(aiptek->features.usbPath)); + strlcat(aiptek->features.usbPath, "/input0", + sizeof(aiptek->features.usbPath)); + + /* Set up client data, pointers to open and close routines + * for the input device. + */ + inputdev->name = "Aiptek"; + inputdev->phys = aiptek->features.usbPath; + usb_to_input_id(usbdev, &inputdev->id); + inputdev->cdev.dev = &intf->dev; + inputdev->private = aiptek; + inputdev->open = aiptek_open; + inputdev->close = aiptek_close; /* Now program the capacities of the tablet, in terms of being * an input device. */ - aiptek->inputdev.evbit[0] |= BIT(EV_KEY) + inputdev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL) | BIT(EV_MSC); - aiptek->inputdev.absbit[0] |= - (BIT(ABS_X) | - BIT(ABS_Y) | - BIT(ABS_PRESSURE) | - BIT(ABS_TILT_X) | - BIT(ABS_TILT_Y) | BIT(ABS_WHEEL) | BIT(ABS_MISC)); + inputdev->absbit[0] |= BIT(ABS_MISC); - aiptek->inputdev.relbit[0] |= + inputdev->relbit[0] |= (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC)); - aiptek->inputdev.keybit[LONG(BTN_LEFT)] |= + inputdev->keybit[LONG(BTN_LEFT)] |= (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE)); - aiptek->inputdev.keybit[LONG(BTN_DIGI)] |= + inputdev->keybit[LONG(BTN_DIGI)] |= (BIT(BTN_TOOL_PEN) | BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_PENCIL) | @@ -2070,70 +2088,26 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) BIT(BTN_TOOL_LENS) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2)); - aiptek->inputdev.mscbit[0] = BIT(MSC_SERIAL); + inputdev->mscbit[0] = BIT(MSC_SERIAL); /* Programming the tablet macro keys needs to be done with a for loop * as the keycodes are discontiguous. */ for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i) - set_bit(macroKeyEvents[i], aiptek->inputdev.keybit); - - /* Set up client data, pointers to open and close routines - * for the input device. - */ - aiptek->inputdev.private = aiptek; - aiptek->inputdev.open = aiptek_open; - aiptek->inputdev.close = aiptek_close; - - /* Determine the usb devices' physical path. - * Asketh not why we always pretend we're using "../input0", - * but I suspect this will have to be refactored one - * day if a single USB device can be a keyboard & a mouse - * & a tablet, and the inputX number actually will tell - * us something... - */ - if (usb_make_path(usbdev, path, 64) > 0) - sprintf(aiptek->features.usbPath, "%s/input0", path); + set_bit(macroKeyEvents[i], inputdev->keybit); - /* Program the input device coordinate capacities. We do not yet + /* + * Program the input device coordinate capacities. We do not yet * know what maximum X, Y, and Z values are, so we're putting fake * values in. Later, we'll ask the tablet to put in the correct * values. */ - aiptek->inputdev.absmin[ABS_X] = 0; - aiptek->inputdev.absmax[ABS_X] = 2999; - aiptek->inputdev.absmin[ABS_Y] = 0; - aiptek->inputdev.absmax[ABS_Y] = 2249; - aiptek->inputdev.absmin[ABS_PRESSURE] = 0; - aiptek->inputdev.absmax[ABS_PRESSURE] = 511; - aiptek->inputdev.absmin[ABS_TILT_X] = AIPTEK_TILT_MIN; - aiptek->inputdev.absmax[ABS_TILT_X] = AIPTEK_TILT_MAX; - aiptek->inputdev.absmin[ABS_TILT_Y] = AIPTEK_TILT_MIN; - aiptek->inputdev.absmax[ABS_TILT_Y] = AIPTEK_TILT_MAX; - aiptek->inputdev.absmin[ABS_WHEEL] = AIPTEK_WHEEL_MIN; - aiptek->inputdev.absmax[ABS_WHEEL] = AIPTEK_WHEEL_MAX - 1; - aiptek->inputdev.absfuzz[ABS_X] = 0; - aiptek->inputdev.absfuzz[ABS_Y] = 0; - aiptek->inputdev.absfuzz[ABS_PRESSURE] = 0; - aiptek->inputdev.absfuzz[ABS_TILT_X] = 0; - aiptek->inputdev.absfuzz[ABS_TILT_Y] = 0; - aiptek->inputdev.absfuzz[ABS_WHEEL] = 0; - aiptek->inputdev.absflat[ABS_X] = 0; - aiptek->inputdev.absflat[ABS_Y] = 0; - aiptek->inputdev.absflat[ABS_PRESSURE] = 0; - aiptek->inputdev.absflat[ABS_TILT_X] = 0; - aiptek->inputdev.absflat[ABS_TILT_Y] = 0; - aiptek->inputdev.absflat[ABS_WHEEL] = 0; - aiptek->inputdev.name = "Aiptek"; - aiptek->inputdev.phys = aiptek->features.usbPath; - usb_to_input_id(usbdev, &aiptek->inputdev.id); - aiptek->inputdev.dev = &intf->dev; - - aiptek->usbdev = usbdev; - aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber; - aiptek->inDelay = 0; - aiptek->endDelay = 0; - aiptek->previousJitterable = 0; + input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0); + input_set_abs_params(inputdev, ABS_X, 0, 2249, 0, 0); + input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); + input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0); endpoint = &intf->altsetting[0].endpoint[0].desc; @@ -2150,28 +2124,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) aiptek->urb->transfer_dma = aiptek->data_dma; aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* Register the tablet as an Input Device - */ - input_register_device(&aiptek->inputdev); - - /* We now will look for the evdev device which is mapped to - * the tablet. The partial name is kept in the link list of - * input_handles associated with this input device. - * What identifies an evdev input_handler is that it begins - * with 'event', continues with a digit, and that in turn - * is mapped to /{devfs}/input/eventN. - */ - inputdev = &aiptek->inputdev; - list_for_each_safe(node, next, &inputdev->h_list) { - inputhandle = to_handle(node); - if (strncmp(inputhandle->name, "event", 5) == 0) { - strcpy(aiptek->features.inputPath, inputhandle->name); - break; - } - } - - info("input: Aiptek on %s (%s)\n", path, aiptek->features.inputPath); - /* Program the tablet. This sets the tablet up in the mode * specified in newSetting, and also queries the tablet's * physical capacities. @@ -2186,13 +2138,32 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) { aiptek->curSetting.programmableDelay = speeds[i]; (void)aiptek_program_tablet(aiptek); - if (aiptek->inputdev.absmax[ABS_X] > 0) { + if (aiptek->inputdev->absmax[ABS_X] > 0) { info("input: Aiptek using %d ms programming speed\n", aiptek->curSetting.programmableDelay); break; } } + /* Register the tablet as an Input Device + */ + input_register_device(aiptek->inputdev); + + /* We now will look for the evdev device which is mapped to + * the tablet. The partial name is kept in the link list of + * input_handles associated with this input device. + * What identifies an evdev input_handler is that it begins + * with 'event', continues with a digit, and that in turn + * is mapped to /{devfs}/input/eventN. + */ + list_for_each_safe(node, next, &inputdev->h_list) { + inputhandle = to_handle(node); + if (strncmp(inputhandle->name, "event", 5) == 0) { + strcpy(aiptek->features.inputPath, inputhandle->name); + break; + } + } + /* Associate this driver's struct with the usb interface. */ usb_set_intfdata(intf, aiptek); @@ -2207,6 +2178,12 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) info("aiptek: error loading 'evdev' module"); return 0; + +fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, + aiptek->data_dma); +fail1: input_free_device(inputdev); + kfree(aiptek); + return -ENOMEM; } /* Forward declaration */ @@ -2234,7 +2211,7 @@ static void aiptek_disconnect(struct usb_interface *intf) /* Free & unhook everything from the system. */ usb_kill_urb(aiptek->urb); - input_unregister_device(&aiptek->inputdev); + input_unregister_device(aiptek->inputdev); aiptek_delete_files(&intf->dev); usb_free_urb(aiptek->urb); usb_buffer_free(interface_to_usbdev(intf), diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index e03c1c567a14..15840db092a5 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -39,7 +39,7 @@ #define APPLE_VENDOR_ID 0x05AC #define ATP_DEVICE(prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ USB_DEVICE_ID_MATCH_INT_CLASS | \ USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ .idVendor = APPLE_VENDOR_ID, \ @@ -78,9 +78,9 @@ MODULE_DEVICE_TABLE (usb, atp_table); * We try to keep the touchpad aspect ratio while still doing only simple * arithmetics. * The factors below give coordinates like: - * 0 <= x < 960 on 12" and 15" Powerbooks - * 0 <= x < 1600 on 17" Powerbooks - * 0 <= y < 646 + * 0 <= x < 960 on 12" and 15" Powerbooks + * 0 <= x < 1600 on 17" Powerbooks + * 0 <= y < 646 */ #define ATP_XFACT 64 #define ATP_YFACT 43 @@ -93,11 +93,12 @@ MODULE_DEVICE_TABLE (usb, atp_table); /* Structure to hold all of our device specific stuff */ struct atp { + char phys[64]; struct usb_device * udev; /* usb device */ struct urb * urb; /* usb request block */ signed char * data; /* transferred data */ int open; /* non-zero if opened */ - struct input_dev input; /* input dev */ + struct input_dev *input; /* input dev */ int valid; /* are the sensors valid ? */ int x_old; /* last reported x/y, */ int y_old; /* used for smoothing */ @@ -114,11 +115,11 @@ struct atp { int i; \ printk("appletouch: %s %lld", msg, (long long)jiffies); \ for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \ - printk(" %02x", tab[i]); \ - printk("\n"); \ + printk(" %02x", tab[i]); \ + printk("\n"); \ } -#define dprintk(format, a...) \ +#define dprintk(format, a...) \ do { \ if (debug) printk(format, ##a); \ } while (0) @@ -219,8 +220,8 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) for (i = 16; i < ATP_XSENSORS; i++) if (dev->xy_cur[i]) { printk("appletouch: 17\" model detected.\n"); - input_set_abs_params(&dev->input, ABS_X, 0, - (ATP_XSENSORS - 1) * + input_set_abs_params(dev->input, ABS_X, 0, + (ATP_XSENSORS - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); break; @@ -260,12 +261,12 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) "Xz: %3d Yz: %3d\n", x, y, x_z, y_z); - input_report_key(&dev->input, BTN_TOUCH, 1); - input_report_abs(&dev->input, ABS_X, x); - input_report_abs(&dev->input, ABS_Y, y); - input_report_abs(&dev->input, ABS_PRESSURE, + input_report_key(dev->input, BTN_TOUCH, 1); + input_report_abs(dev->input, ABS_X, x); + input_report_abs(dev->input, ABS_Y, y); + input_report_abs(dev->input, ABS_PRESSURE, min(ATP_PRESSURE, x_z + y_z)); - atp_report_fingers(&dev->input, max(x_f, y_f)); + atp_report_fingers(dev->input, max(x_f, y_f)); } dev->x_old = x; dev->y_old = y; @@ -273,17 +274,17 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) else if (!x && !y) { dev->x_old = dev->y_old = -1; - input_report_key(&dev->input, BTN_TOUCH, 0); - input_report_abs(&dev->input, ABS_PRESSURE, 0); - atp_report_fingers(&dev->input, 0); + input_report_key(dev->input, BTN_TOUCH, 0); + input_report_abs(dev->input, ABS_PRESSURE, 0); + atp_report_fingers(dev->input, 0); /* reset the accumulator on release */ memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); } - input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]); + input_report_key(dev->input, BTN_LEFT, !!dev->data[80]); - input_sync(&dev->input); + input_sync(dev->input); exit: retval = usb_submit_urb(dev->urb, GFP_ATOMIC); @@ -314,21 +315,14 @@ static void atp_close(struct input_dev *input) static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) { - struct atp *dev = NULL; + struct atp *dev; + struct input_dev *input_dev; + struct usb_device *udev = interface_to_usbdev(iface); struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int int_in_endpointAddr = 0; int i, retval = -ENOMEM; - /* allocate memory for our device state and initialize it */ - dev = kmalloc(sizeof(struct atp), GFP_KERNEL); - if (dev == NULL) { - err("Out of memory"); - goto err_kmalloc; - } - memset(dev, 0, sizeof(struct atp)); - - dev->udev = interface_to_usbdev(iface); /* set up the endpoint information */ /* use only the first interrupt-in endpoint */ @@ -345,70 +339,82 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id } } if (!int_in_endpointAddr) { - retval = -EIO; err("Could not find int-in endpoint"); - goto err_endpoint; + return -EIO; } - /* save our data pointer in this interface device */ - usb_set_intfdata(iface, dev); + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(struct atp), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!dev || !input_dev) { + err("Out of memory"); + goto err_free_devs; + } + + dev->udev = udev; + dev->input = input_dev; dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) { retval = -ENOMEM; - goto err_usballoc; + goto err_free_devs; } + dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL, &dev->urb->transfer_dma); if (!dev->data) { retval = -ENOMEM; - goto err_usbbufalloc; + goto err_free_urb; } - usb_fill_int_urb(dev->urb, dev->udev, - usb_rcvintpipe(dev->udev, int_in_endpointAddr), + + usb_fill_int_urb(dev->urb, udev, + usb_rcvintpipe(udev, int_in_endpointAddr), dev->data, ATP_DATASIZE, atp_complete, dev, 1); - init_input_dev(&dev->input); - dev->input.name = "appletouch"; - dev->input.dev = &iface->dev; - dev->input.private = dev; - dev->input.open = atp_open; - dev->input.close = atp_close; + usb_make_path(udev, dev->phys, sizeof(dev->phys)); + strlcat(dev->phys, "/input0", sizeof(dev->phys)); + + input_dev->name = "appletouch"; + input_dev->phys = dev->phys; + usb_to_input_id(dev->udev, &input_dev->id); + input_dev->cdev.dev = &iface->dev; - usb_to_input_id(dev->udev, &dev->input.id); + input_dev->private = dev; + input_dev->open = atp_open; + input_dev->close = atp_close; - set_bit(EV_ABS, dev->input.evbit); + set_bit(EV_ABS, input_dev->evbit); /* * 12" and 15" Powerbooks only have 16 x sensors, * 17" models are detected later. */ - input_set_abs_params(&dev->input, ABS_X, 0, + input_set_abs_params(input_dev, ABS_X, 0, (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); - input_set_abs_params(&dev->input, ABS_Y, 0, + input_set_abs_params(input_dev, ABS_Y, 0, (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); - input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); - set_bit(EV_KEY, dev->input.evbit); - set_bit(BTN_TOUCH, dev->input.keybit); - set_bit(BTN_TOOL_FINGER, dev->input.keybit); - set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit); - set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit); - set_bit(BTN_LEFT, dev->input.keybit); + set_bit(EV_KEY, input_dev->evbit); + set_bit(BTN_TOUCH, input_dev->keybit); + set_bit(BTN_TOOL_FINGER, input_dev->keybit); + set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + set_bit(BTN_LEFT, input_dev->keybit); - input_register_device(&dev->input); + input_register_device(dev->input); - printk(KERN_INFO "input: appletouch connected\n"); + /* save our data pointer in this interface device */ + usb_set_intfdata(iface, dev); return 0; -err_usbbufalloc: + err_free_urb: usb_free_urb(dev->urb); -err_usballoc: + err_free_devs: usb_set_intfdata(iface, NULL); -err_endpoint: kfree(dev); -err_kmalloc: + input_free_device(input_dev); return retval; } @@ -419,7 +425,7 @@ static void atp_disconnect(struct usb_interface *iface) usb_set_intfdata(iface, NULL); if (dev) { usb_kill_urb(dev->urb); - input_unregister_device(&dev->input); + input_unregister_device(dev->input); usb_free_urb(dev->urb); usb_buffer_free(dev->udev, ATP_DATASIZE, dev->data, dev->urb->transfer_dma); diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index fd99681ee483..9a2a47db9494 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -112,7 +112,6 @@ #define NAME_BUFSIZE 80 /* size of product name, path buffers */ #define DATA_BUFSIZE 63 /* size of URB data buffers */ -#define ATI_INPUTNUM 1 /* Which input device to register as */ static unsigned long channel_mask; module_param(channel_mask, ulong, 0444); @@ -162,7 +161,7 @@ static char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; static DECLARE_MUTEX(disconnect_sem); struct ati_remote { - struct input_dev idev; + struct input_dev *idev; struct usb_device *udev; struct usb_interface *interface; @@ -198,15 +197,13 @@ struct ati_remote { #define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ /* Translation table from hardware messages to input events. */ -static struct -{ +static struct { short kind; unsigned char data1, data2; int type; unsigned int code; int value; -} ati_remote_tbl[] = -{ +} ati_remote_tbl[] = { /* Directional control pad axes */ {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ @@ -286,7 +283,6 @@ static struct /* Local function prototypes */ static void ati_remote_dump (unsigned char *data, unsigned int actual_length); -static void ati_remote_delete (struct ati_remote *dev); static int ati_remote_open (struct input_dev *inputdev); static void ati_remote_close (struct input_dev *inputdev); static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data); @@ -428,7 +424,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) { struct ati_remote *ati_remote = urb->context; unsigned char *data= ati_remote->inbuf; - struct input_dev *dev = &ati_remote->idev; + struct input_dev *dev = ati_remote->idev; int index, acc; int remote_num; @@ -587,38 +583,55 @@ static void ati_remote_irq_in(struct urb *urb, struct pt_regs *regs) } /* - * ati_remote_delete + * ati_remote_alloc_buffers */ -static void ati_remote_delete(struct ati_remote *ati_remote) +static int ati_remote_alloc_buffers(struct usb_device *udev, + struct ati_remote *ati_remote) { - if (ati_remote->irq_urb) - usb_kill_urb(ati_remote->irq_urb); + ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, + &ati_remote->inbuf_dma); + if (!ati_remote->inbuf) + return -1; - if (ati_remote->out_urb) - usb_kill_urb(ati_remote->out_urb); + ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, + &ati_remote->outbuf_dma); + if (!ati_remote->outbuf) + return -1; - input_unregister_device(&ati_remote->idev); + ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->irq_urb) + return -1; - if (ati_remote->inbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->inbuf, ati_remote->inbuf_dma); + ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->out_urb) + return -1; - if (ati_remote->outbuf) - usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, - ati_remote->outbuf, ati_remote->outbuf_dma); + return 0; +} +/* + * ati_remote_free_buffers + */ +static void ati_remote_free_buffers(struct ati_remote *ati_remote) +{ if (ati_remote->irq_urb) usb_free_urb(ati_remote->irq_urb); if (ati_remote->out_urb) usb_free_urb(ati_remote->out_urb); - kfree(ati_remote); + if (ati_remote->inbuf) + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->inbuf_dma); + + if (ati_remote->outbuf) + usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->outbuf_dma); } static void ati_remote_input_init(struct ati_remote *ati_remote) { - struct input_dev *idev = &(ati_remote->idev); + struct input_dev *idev = ati_remote->idev; int i; idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); @@ -637,7 +650,7 @@ static void ati_remote_input_init(struct ati_remote *ati_remote) idev->phys = ati_remote->phys; usb_to_input_id(ati_remote->udev, &idev->id); - idev->dev = &ati_remote->udev->dev; + idev->cdev.dev = &ati_remote->udev->dev; } static int ati_remote_initialize(struct ati_remote *ati_remote) @@ -674,7 +687,7 @@ static int ati_remote_initialize(struct ati_remote *ati_remote) (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { dev_err(&ati_remote->interface->dev, "Initializing ati_remote hardware failed.\n"); - return 1; + return -EIO; } return 0; @@ -686,95 +699,83 @@ static int ati_remote_initialize(struct ati_remote *ati_remote) static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); - struct ati_remote *ati_remote = NULL; - struct usb_host_interface *iface_host; - int retval = -ENOMEM; - char path[64]; - - /* Allocate and clear an ati_remote struct */ - if (!(ati_remote = kmalloc(sizeof (struct ati_remote), GFP_KERNEL))) - return -ENOMEM; - memset(ati_remote, 0x00, sizeof (struct ati_remote)); + struct usb_host_interface *iface_host = interface->cur_altsetting; + struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; + struct ati_remote *ati_remote; + struct input_dev *input_dev; + int err = -ENOMEM; - iface_host = interface->cur_altsetting; if (iface_host->desc.bNumEndpoints != 2) { err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - ati_remote->endpoint_in = &(iface_host->endpoint[0].desc); - ati_remote->endpoint_out = &(iface_host->endpoint[1].desc); - ati_remote->udev = udev; - ati_remote->interface = interface; + endpoint_in = &iface_host->endpoint[0].desc; + endpoint_out = &iface_host->endpoint[1].desc; - if (!(ati_remote->endpoint_in->bEndpointAddress & 0x80)) { + if (!(endpoint_in->bEndpointAddress & USB_DIR_IN)) { err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - if ((ati_remote->endpoint_in->bmAttributes & 3) != 3) { + if ((endpoint_in->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) { err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - if (le16_to_cpu(ati_remote->endpoint_in->wMaxPacketSize) == 0) { + if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { err("%s: endpoint_in message size==0? \n", __FUNCTION__); - retval = -ENODEV; - goto error; + return -ENODEV; } - /* Allocate URB buffers, URBs */ - ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, - &ati_remote->inbuf_dma); - if (!ati_remote->inbuf) - goto error; + ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ati_remote || !input_dev) + goto fail1; - ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC, - &ati_remote->outbuf_dma); - if (!ati_remote->outbuf) - goto error; + /* Allocate URB buffers, URBs */ + if (ati_remote_alloc_buffers(udev, ati_remote)) + goto fail2; - ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->irq_urb) - goto error; + ati_remote->endpoint_in = endpoint_in; + ati_remote->endpoint_out = endpoint_out; + ati_remote->udev = udev; + ati_remote->idev = input_dev; + ati_remote->interface = interface; - ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->out_urb) - goto error; + usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys)); + strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); - usb_make_path(udev, path, NAME_BUFSIZE); - sprintf(ati_remote->phys, "%s/input%d", path, ATI_INPUTNUM); if (udev->manufacturer) - strcat(ati_remote->name, udev->manufacturer); + strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name)); if (udev->product) - sprintf(ati_remote->name, "%s %s", ati_remote->name, udev->product); + snprintf(ati_remote->name, sizeof(ati_remote->name), + "%s %s", ati_remote->name, udev->product); if (!strlen(ati_remote->name)) - sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)", + snprintf(ati_remote->name, sizeof(ati_remote->name), + DRIVER_DESC "(%04x,%04x)", le16_to_cpu(ati_remote->udev->descriptor.idVendor), le16_to_cpu(ati_remote->udev->descriptor.idProduct)); + ati_remote_input_init(ati_remote); + /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ - retval = ati_remote_initialize(ati_remote); - if (retval) - goto error; + err = ati_remote_initialize(ati_remote); + if (err) + goto fail3; /* Set up and register input device */ - ati_remote_input_init(ati_remote); - input_register_device(&ati_remote->idev); - - dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n", - ati_remote->name, path); + input_register_device(ati_remote->idev); usb_set_intfdata(interface, ati_remote); + return 0; -error: - if (retval) - ati_remote_delete(ati_remote); - - return retval; +fail3: usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); +fail2: ati_remote_free_buffers(ati_remote); +fail1: input_free_device(input_dev); + kfree(ati_remote); + return err; } /* @@ -791,7 +792,11 @@ static void ati_remote_disconnect(struct usb_interface *interface) return; } - ati_remote_delete(ati_remote); + usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); + input_unregister_device(ati_remote->idev); + ati_remote_free_buffers(ati_remote); + kfree(ati_remote); } /* diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 41f92b924761..411a0645a7a3 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1619,8 +1619,8 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) struct hid_descriptor *hdesc; struct hid_device *hid; unsigned quirks = 0, rsize = 0; - char *buf, *rdesc; - int n, insize = 0; + char *rdesc; + int n, len, insize = 0; for (n = 0; hid_blacklist[n].idVendor; n++) if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) && @@ -1630,10 +1630,11 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) if (quirks & HID_QUIRK_IGNORE) return NULL; - if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && ((!interface->desc.bNumEndpoints) || - usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { - dbg("class descriptor not present\n"); - return NULL; + if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && + (!interface->desc.bNumEndpoints || + usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { + dbg("class descriptor not present\n"); + return NULL; } for (n = 0; n < hdesc->bNumDescriptors; n++) @@ -1749,32 +1750,34 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) hid->name[0] = 0; - if (!(buf = kmalloc(64, GFP_KERNEL))) - goto fail; + if (dev->manufacturer) + strlcpy(hid->name, dev->manufacturer, sizeof(hid->name)); + + if (dev->product) { + if (dev->manufacturer) + strlcat(hid->name, " ", sizeof(hid->name)); + strlcat(hid->name, dev->product, sizeof(hid->name)); + } + + if (!strlen(hid->name)) + snprintf(hid->name, sizeof(hid->name), "HID %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); - if (dev->manufacturer) { - strcat(hid->name, dev->manufacturer); - if (dev->product) - snprintf(hid->name, 64, "%s %s", hid->name, dev->product); - } else if (dev->product) { - snprintf(hid->name, 128, "%s", dev->product); - } else - snprintf(hid->name, 128, "%04x:%04x", - le16_to_cpu(dev->descriptor.idVendor), - le16_to_cpu(dev->descriptor.idProduct)); - - usb_make_path(dev, buf, 64); - snprintf(hid->phys, 64, "%s/input%d", buf, - intf->altsetting[0].desc.bInterfaceNumber); + usb_make_path(dev, hid->phys, sizeof(hid->phys)); + strlcat(hid->phys, "/input", sizeof(hid->phys)); + len = strlen(hid->phys); + if (len < sizeof(hid->phys) - 1) + snprintf(hid->phys + len, sizeof(hid->phys) - len, + "%d", intf->altsetting[0].desc.bInterfaceNumber); if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0) hid->uniq[0] = 0; - kfree(buf); - hid->urbctrl = usb_alloc_urb(0, GFP_KERNEL); if (!hid->urbctrl) goto fail; + usb_fill_control_urb(hid->urbctrl, dev, 0, (void *) hid->cr, hid->ctrlbuf, 1, hid_ctrl, hid); hid->urbctrl->setup_dma = hid->cr_dma; diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c index 0b6452248a39..9ff25eb520a6 100644 --- a/drivers/usb/input/hid-input.c +++ b/drivers/usb/input/hid-input.c @@ -76,8 +76,8 @@ static struct { static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field, struct hid_usage *usage) { - struct input_dev *input = &hidinput->input; - struct hid_device *device = hidinput->input.private; + struct input_dev *input = hidinput->input; + struct hid_device *device = input->private; int max = 0, code; unsigned long *bit = NULL; @@ -461,7 +461,8 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct if (!field->hidinput) return; - input = &field->hidinput->input; + + input = field->hidinput->input; input_regs(input, regs); @@ -533,13 +534,10 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct void hidinput_report_event(struct hid_device *hid, struct hid_report *report) { - struct list_head *lh; struct hid_input *hidinput; - list_for_each (lh, &hid->inputs) { - hidinput = list_entry(lh, struct hid_input, list); - input_sync(&hidinput->input); - } + list_for_each_entry(hidinput, &hid->inputs, list) + input_sync(hidinput->input); } static int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field) @@ -604,6 +602,7 @@ int hidinput_connect(struct hid_device *hid) struct usb_device *dev = hid->dev; struct hid_report *report; struct hid_input *hidinput = NULL; + struct input_dev *input_dev; int i, j, k; INIT_LIST_HEAD(&hid->inputs); @@ -624,25 +623,28 @@ int hidinput_connect(struct hid_device *hid) continue; if (!hidinput) { - hidinput = kmalloc(sizeof(*hidinput), GFP_KERNEL); - if (!hidinput) { + hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!hidinput || !input_dev) { + kfree(hidinput); + input_free_device(input_dev); err("Out of memory during hid input probe"); return -1; } - memset(hidinput, 0, sizeof(*hidinput)); - list_add_tail(&hidinput->list, &hid->inputs); + input_dev->private = hid; + input_dev->event = hidinput_input_event; + input_dev->open = hidinput_open; + input_dev->close = hidinput_close; - hidinput->input.private = hid; - hidinput->input.event = hidinput_input_event; - hidinput->input.open = hidinput_open; - hidinput->input.close = hidinput_close; + input_dev->name = hid->name; + input_dev->phys = hid->phys; + input_dev->uniq = hid->uniq; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &hid->intf->dev; - hidinput->input.name = hid->name; - hidinput->input.phys = hid->phys; - hidinput->input.uniq = hid->uniq; - usb_to_input_id(dev, &hidinput->input.id); - hidinput->input.dev = &hid->intf->dev; + hidinput->input = input_dev; + list_add_tail(&hidinput->list, &hid->inputs); } for (i = 0; i < report->maxfield; i++) @@ -657,7 +659,7 @@ int hidinput_connect(struct hid_device *hid) * UGCI) cram a lot of unrelated inputs into the * same interface. */ hidinput->report = report; - input_register_device(&hidinput->input); + input_register_device(hidinput->input); hidinput = NULL; } } @@ -667,7 +669,7 @@ int hidinput_connect(struct hid_device *hid) * only useful in this case, and not for multi-input quirks. */ if (hidinput) { hid_ff_init(hid); - input_register_device(&hidinput->input); + input_register_device(hidinput->input); } return 0; @@ -675,13 +677,11 @@ int hidinput_connect(struct hid_device *hid) void hidinput_disconnect(struct hid_device *hid) { - struct list_head *lh, *next; - struct hid_input *hidinput; + struct hid_input *hidinput, *next; - list_for_each_safe(lh, next, &hid->inputs) { - hidinput = list_entry(lh, struct hid_input, list); - input_unregister_device(&hidinput->input); + list_for_each_entry_safe(hidinput, next, &hid->inputs, list) { list_del(&hidinput->list); + input_unregister_device(hidinput->input); kfree(hidinput); } } diff --git a/drivers/usb/input/hid-lgff.c b/drivers/usb/input/hid-lgff.c index 0c4c77aa31ea..f82c9c9e5d51 100644 --- a/drivers/usb/input/hid-lgff.c +++ b/drivers/usb/input/hid-lgff.c @@ -255,22 +255,19 @@ static void hid_lgff_input_init(struct hid_device* hid) u16 idVendor = le16_to_cpu(hid->dev->descriptor.idVendor); u16 idProduct = le16_to_cpu(hid->dev->descriptor.idProduct); struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; while (dev->idVendor && (idVendor != dev->idVendor || idProduct != dev->idProduct)) dev++; - ff = dev->ff; + for (ff = dev->ff; *ff >= 0; ff++) + set_bit(*ff, input_dev->ffbit); - while (*ff >= 0) { - set_bit(*ff, hidinput->input.ffbit); - ++ff; - } - - hidinput->input.upload_effect = hid_lgff_upload_effect; - hidinput->input.flush = hid_lgff_flush; + input_dev->upload_effect = hid_lgff_upload_effect; + input_dev->flush = hid_lgff_flush; - set_bit(EV_FF, hidinput->input.evbit); - hidinput->input.ff_effects_max = LGFF_EFFECTS; + set_bit(EV_FF, input_dev->evbit); + input_dev->ff_effects_max = LGFF_EFFECTS; } static void hid_lgff_exit(struct hid_device* hid) diff --git a/drivers/usb/input/hid-tmff.c b/drivers/usb/input/hid-tmff.c index 8f6a0a6f94a9..023fd5ac31c8 100644 --- a/drivers/usb/input/hid-tmff.c +++ b/drivers/usb/input/hid-tmff.c @@ -111,6 +111,7 @@ int hid_tmff_init(struct hid_device *hid) struct tmff_device *private; struct list_head *pos; struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; private = kmalloc(sizeof(struct tmff_device), GFP_KERNEL); if (!private) @@ -155,7 +156,7 @@ int hid_tmff_init(struct hid_device *hid) private->report = report; private->rumble = field; - set_bit(FF_RUMBLE, hidinput->input.ffbit); + set_bit(FF_RUMBLE, input_dev->ffbit); break; default: @@ -164,11 +165,11 @@ int hid_tmff_init(struct hid_device *hid) } /* Fallthrough to here only when a valid usage is found */ - hidinput->input.upload_effect = hid_tmff_upload_effect; - hidinput->input.flush = hid_tmff_flush; + input_dev->upload_effect = hid_tmff_upload_effect; + input_dev->flush = hid_tmff_flush; - set_bit(EV_FF, hidinput->input.evbit); - hidinput->input.ff_effects_max = TMFF_EFFECTS; + set_bit(EV_FF, input_dev->evbit); + input_dev->ff_effects_max = TMFF_EFFECTS; } } diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h index ec2412c42f1e..ee48a2276104 100644 --- a/drivers/usb/input/hid.h +++ b/drivers/usb/input/hid.h @@ -371,7 +371,7 @@ struct hid_control_fifo { struct hid_input { struct list_head list; struct hid_report *report; - struct input_dev input; + struct input_dev *input; }; struct hid_device { /* device report descriptor */ diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index becb87efb869..3b581853cf10 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -73,7 +73,7 @@ MODULE_LICENSE( DRIVER_LICENSE ); struct itmtouch_dev { struct usb_device *usbdev; /* usb device */ - struct input_dev inputdev; /* input device */ + struct input_dev *inputdev; /* input device */ struct urb *readurb; /* urb */ char rbuf[ITM_BUFSIZE]; /* data */ int users; @@ -88,9 +88,9 @@ static struct usb_device_id itmtouch_ids [] = { static void itmtouch_irq(struct urb *urb, struct pt_regs *regs) { - struct itmtouch_dev * itmtouch = urb->context; + struct itmtouch_dev *itmtouch = urb->context; unsigned char *data = urb->transfer_buffer; - struct input_dev *dev = &itmtouch->inputdev; + struct input_dev *dev = itmtouch->inputdev; int retval; switch (urb->status) { @@ -156,49 +156,62 @@ static void itmtouch_close(struct input_dev *input) static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct itmtouch_dev *itmtouch; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); unsigned int pipe; unsigned int maxp; - char path[PATH_SIZE]; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL))) { + itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!itmtouch || !input_dev) { err("%s - Out of memory.", __FUNCTION__); - return -ENOMEM; + goto fail; } itmtouch->usbdev = udev; + itmtouch->inputdev = input_dev; - itmtouch->inputdev.private = itmtouch; - itmtouch->inputdev.open = itmtouch_open; - itmtouch->inputdev.close = itmtouch_close; + if (udev->manufacturer) + strlcpy(itmtouch->name, udev->manufacturer, sizeof(itmtouch->name)); - usb_make_path(udev, path, PATH_SIZE); - - itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - itmtouch->inputdev.name = itmtouch->name; - itmtouch->inputdev.phys = itmtouch->phys; - usb_to_input_id(udev, &itmtouch->inputdev.id); - itmtouch->inputdev.dev = &intf->dev; + if (udev->product) { + if (udev->manufacturer) + strlcat(itmtouch->name, " ", sizeof(itmtouch->name)); + strlcat(itmtouch->name, udev->product, sizeof(itmtouch->name)); + } if (!strlen(itmtouch->name)) sprintf(itmtouch->name, "USB ITM touchscreen"); + usb_make_path(udev, itmtouch->phys, sizeof(itmtouch->phys)); + strlcpy(itmtouch->phys, "/input0", sizeof(itmtouch->phys)); + + input_dev->name = itmtouch->name; + input_dev->phys = itmtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = itmtouch; + + input_dev->open = itmtouch_open; + input_dev->close = itmtouch_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + /* device limits */ /* as specified by the ITM datasheet, X and Y are 12bit, * Z (pressure) is 8 bit. However, the fields are defined up * to 14 bits for future possible expansion. */ - input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0); - input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0); - input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0); + input_set_abs_params(input_dev, ABS_X, 0, 0x0FFF, 2, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x0FFF, 2, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 2, 0); /* initialise the URB so we can read from the transport stream */ pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress); @@ -208,22 +221,23 @@ static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id maxp = ITM_BUFSIZE; itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL); - if (!itmtouch->readurb) { dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__); - kfree(itmtouch); - return -ENOMEM; + goto fail; } usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf, maxp, itmtouch_irq, itmtouch, endpoint->bInterval); - input_register_device(&itmtouch->inputdev); + input_register_device(itmtouch->inputdev); - printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path); usb_set_intfdata(intf, itmtouch); return 0; + + fail: input_free_device(input_dev); + kfree(itmtouch); + return -ENOMEM; } static void itmtouch_disconnect(struct usb_interface *intf) @@ -233,7 +247,7 @@ static void itmtouch_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (itmtouch) { - input_unregister_device(&itmtouch->inputdev); + input_unregister_device(itmtouch->inputdev); usb_kill_urb(itmtouch->readurb); usb_free_urb(itmtouch->readurb); kfree(itmtouch); diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c index b6f6ac8d9c2f..a248664b5d1d 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/usb/input/kbtab.c @@ -34,7 +34,7 @@ MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks"); struct kbtab { signed char *data; dma_addr_t data_dma; - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; struct urb *irq; int x, y; @@ -48,7 +48,7 @@ static void kbtab_irq(struct urb *urb, struct pt_regs *regs) { struct kbtab *kbtab = urb->context; unsigned char *data = kbtab->data; - struct input_dev *dev = &kbtab->dev; + struct input_dev *dev = kbtab->dev; int retval; switch (urb->status) { @@ -124,53 +124,43 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i struct usb_device *dev = interface_to_usbdev(intf); struct usb_endpoint_descriptor *endpoint; struct kbtab *kbtab; - char path[64]; + struct input_dev *input_dev; - if (!(kbtab = kmalloc(sizeof(struct kbtab), GFP_KERNEL))) - return -ENOMEM; - memset(kbtab, 0, sizeof(struct kbtab)); + kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbtab || !input_dev) + goto fail1; kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma); - if (!kbtab->data) { - kfree(kbtab); - return -ENOMEM; - } + if (!kbtab->data) + goto fail1; kbtab->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!kbtab->irq) { - usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma); - kfree(kbtab); - return -ENOMEM; - } - - kbtab->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); - kbtab->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - - kbtab->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - - kbtab->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); + if (!kbtab->irq) + goto fail2; - kbtab->dev.mscbit[0] |= BIT(MSC_SERIAL); - - kbtab->dev.absmax[ABS_X] = 0x2000; - kbtab->dev.absmax[ABS_Y] = 0x1750; - kbtab->dev.absmax[ABS_PRESSURE] = 0xff; + kbtab->usbdev = dev; + kbtab->dev = input_dev; - kbtab->dev.absfuzz[ABS_X] = 4; - kbtab->dev.absfuzz[ABS_Y] = 4; + usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys)); + strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys)); - kbtab->dev.private = kbtab; - kbtab->dev.open = kbtab_open; - kbtab->dev.close = kbtab_close; + input_dev->name = "KB Gear Tablet"; + input_dev->phys = kbtab->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = kbtab; - usb_make_path(dev, path, 64); - sprintf(kbtab->phys, "%s/input0", path); + input_dev->open = kbtab_open; + input_dev->close = kbtab_close; - kbtab->dev.name = "KB Gear Tablet"; - kbtab->dev.phys = kbtab->phys; - usb_to_input_id(dev, &kbtab->dev.id); - kbtab->dev.dev = &intf->dev; - kbtab->usbdev = dev; + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0); + input_set_abs_params(input_dev, ABS_X, 0, 0x1750, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0); endpoint = &intf->cur_altsetting->endpoint[0].desc; @@ -181,23 +171,25 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i kbtab->irq->transfer_dma = kbtab->data_dma; kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&kbtab->dev); - - printk(KERN_INFO "input: KB Gear Tablet on %s\n", path); + input_register_device(kbtab->dev); usb_set_intfdata(intf, kbtab); - return 0; + +fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma); +fail1: input_free_device(input_dev); + kfree(kbtab); + return -ENOMEM; } static void kbtab_disconnect(struct usb_interface *intf) { - struct kbtab *kbtab = usb_get_intfdata (intf); + struct kbtab *kbtab = usb_get_intfdata(intf); usb_set_intfdata(intf, NULL); if (kbtab) { usb_kill_urb(kbtab->irq); - input_unregister_device(&kbtab->dev); + input_unregister_device(kbtab->dev); usb_free_urb(kbtab->irq); usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma); kfree(kbtab); diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index 99de1b33c07d..5b8d65f62abf 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -20,6 +20,7 @@ #include #include #include +#include #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "Michael Downey " @@ -75,7 +76,7 @@ struct usb_keyspan { char name[128]; char phys[64]; struct usb_device* udev; - struct input_dev input; + struct input_dev *input; struct usb_interface* interface; struct usb_endpoint_descriptor* in_endpoint; struct urb* irq_urb; @@ -136,12 +137,11 @@ static struct usb_driver keyspan_driver; */ static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ { - char codes[4*RECV_SIZE]; + char codes[4 * RECV_SIZE]; int i; - for (i = 0; i < RECV_SIZE; i++) { - snprintf(codes+i*3, 4, "%02x ", dev->in_buffer[i]); - } + for (i = 0; i < RECV_SIZE; i++) + snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]); dev_info(&dev->udev->dev, "%s\n", codes); } @@ -153,7 +153,7 @@ static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) { if (dev->data.bits_left >= bits_needed) - return(0); + return 0; /* * Somehow we've missed the last message. The message will be repeated @@ -162,7 +162,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) if (dev->data.pos >= dev->data.len) { dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n", __FUNCTION__, dev->data.pos, dev->data.len); - return(-1); + return -1; } /* Load as much as we can into the tester. */ @@ -172,7 +172,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) dev->data.bits_left += 8; } - return(0); + return 0; } /* @@ -311,10 +311,10 @@ static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs) __FUNCTION__, message.system, message.button, message.toggle); if (message.toggle != remote->toggle) { - input_regs(&remote->input, regs); - input_report_key(&remote->input, keyspan_key_table[message.button], 1); - input_report_key(&remote->input, keyspan_key_table[message.button], 0); - input_sync(&remote->input); + input_regs(remote->input, regs); + input_report_key(remote->input, keyspan_key_table[message.button], 1); + input_report_key(remote->input, keyspan_key_table[message.button], 0); + input_sync(remote->input); remote->toggle = message.toggle; } @@ -397,14 +397,9 @@ static int keyspan_open(struct input_dev *dev) { struct usb_keyspan *remote = dev->private; - if (remote->open++) - return 0; - remote->irq_urb->dev = remote->udev; - if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) { - remote->open--; + if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) return -EIO; - } return 0; } @@ -413,8 +408,26 @@ static void keyspan_close(struct input_dev *dev) { struct usb_keyspan *remote = dev->private; - if (!--remote->open) - usb_kill_urb(remote->irq_urb); + usb_kill_urb(remote->irq_urb); +} + +static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface) +{ + + struct usb_endpoint_descriptor *endpoint; + int i; + + for (i = 0; i < iface->desc.bNumEndpoints; ++i) { + endpoint = &iface->endpoint[i].desc; + + if ((endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + /* we found our interrupt in endpoint */ + return endpoint; + } + } + + return NULL; } /* @@ -422,110 +435,78 @@ static void keyspan_close(struct input_dev *dev) */ static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id) { - int i; - int retval = -ENOMEM; - char path[64]; - char *buf; - struct usb_keyspan *remote = NULL; - struct usb_host_interface *iface_desc; + struct usb_device *udev = interface_to_usbdev(interface); struct usb_endpoint_descriptor *endpoint; - struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); + struct usb_keyspan *remote; + struct input_dev *input_dev; + int i, retval; - /* allocate memory for our device state and initialize it */ - remote = kmalloc(sizeof(*remote), GFP_KERNEL); - if (remote == NULL) { - err("Out of memory\n"); - goto error; + endpoint = keyspan_get_in_endpoint(interface->cur_altsetting); + if (!endpoint) + return -ENODEV; + + remote = kzalloc(sizeof(*remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!remote || !input_dev) { + retval = -ENOMEM; + goto fail1; } - memset(remote, 0x00, sizeof(*remote)); remote->udev = udev; + remote->input = input_dev; remote->interface = interface; + remote->in_endpoint = endpoint; remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */ - /* set up the endpoint information */ - /* use only the first in interrupt endpoint */ - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (!remote->in_endpoint && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { - /* we found our interrupt in endpoint */ - remote->in_endpoint = endpoint; - - remote->in_buffer = usb_buffer_alloc(remote->udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma); - if (!remote->in_buffer) { - retval = -ENOMEM; - goto error; - } - } - } - - if (!remote->in_endpoint) { - err("Could not find interrupt input endpoint.\n"); - retval = -ENODEV; - goto error; + remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma); + if (!remote->in_buffer) { + retval = -ENOMEM; + goto fail1; } remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); if (!remote->irq_urb) { - err("Failed to allocate urb.\n"); retval = -ENOMEM; - goto error; + goto fail2; } - retval = keyspan_setup(remote->udev); + retval = keyspan_setup(udev); if (retval) { - err("Failed to setup device.\n"); retval = -ENODEV; - goto error; - } - - /* - * Setup the input system with the bits we are going to be reporting - */ - remote->input.evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ - for (i = 0; i < 32; ++i) { - if (keyspan_key_table[i] != KEY_RESERVED) { - set_bit(keyspan_key_table[i], remote->input.keybit); - } + goto fail3; } - remote->input.private = remote; - remote->input.open = keyspan_open; - remote->input.close = keyspan_close; - - usb_make_path(remote->udev, path, 64); - sprintf(remote->phys, "%s/input0", path); + if (udev->manufacturer) + strlcpy(remote->name, udev->manufacturer, sizeof(remote->name)); - remote->input.name = remote->name; - remote->input.phys = remote->phys; - remote->input.id.bustype = BUS_USB; - remote->input.id.vendor = le16_to_cpu(remote->udev->descriptor.idVendor); - remote->input.id.product = le16_to_cpu(remote->udev->descriptor.idProduct); - remote->input.id.version = le16_to_cpu(remote->udev->descriptor.bcdDevice); - - if (!(buf = kmalloc(63, GFP_KERNEL))) { - usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); - kfree(remote); - return -ENOMEM; + if (udev->product) { + if (udev->manufacturer) + strlcat(remote->name, " ", sizeof(remote->name)); + strlcat(remote->name, udev->product, sizeof(remote->name)); } - if (remote->udev->descriptor.iManufacturer && - usb_string(remote->udev, remote->udev->descriptor.iManufacturer, buf, 63) > 0) - strcat(remote->name, buf); + if (!strlen(remote->name)) + snprintf(remote->name, sizeof(remote->name), + "USB Keyspan Remote %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); - if (remote->udev->descriptor.iProduct && - usb_string(remote->udev, remote->udev->descriptor.iProduct, buf, 63) > 0) - sprintf(remote->name, "%s %s", remote->name, buf); + usb_make_path(udev, remote->phys, sizeof(remote->phys)); + strlcat(remote->phys, "/input0", sizeof(remote->phys)); - if (!strlen(remote->name)) - sprintf(remote->name, "USB Keyspan Remote %04x:%04x", - remote->input.id.vendor, remote->input.id.product); + input_dev->name = remote->name; + input_dev->phys = remote->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &interface->dev; - kfree(buf); + input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ + for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++) + if (keyspan_key_table[i] != KEY_RESERVED) + set_bit(keyspan_key_table[i], input_dev->keybit); + + input_dev->private = remote; + input_dev->open = keyspan_open; + input_dev->close = keyspan_close; /* * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open() @@ -538,27 +519,17 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; /* we can register the device now, as it is ready */ - input_register_device(&remote->input); + input_register_device(remote->input); /* save our data pointer in this interface device */ usb_set_intfdata(interface, remote); - /* let the user know what node this device is now attached to */ - info("connected: %s on %s", remote->name, path); return 0; -error: - /* - * In case of error we need to clean up any allocated buffers - */ - if (remote->irq_urb) - usb_free_urb(remote->irq_urb); - - if (remote->in_buffer) - usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); - - if (remote) - kfree(remote); + fail3: usb_free_urb(remote->irq_urb); + fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + fail1: kfree(remote); + input_free_device(input_dev); return retval; } @@ -570,23 +541,16 @@ static void keyspan_disconnect(struct usb_interface *interface) { struct usb_keyspan *remote; - /* prevent keyspan_open() from racing keyspan_disconnect() */ - lock_kernel(); - remote = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); if (remote) { /* We have a valid driver structure so clean up everything we allocated. */ - input_unregister_device(&remote->input); + input_unregister_device(remote->input); usb_kill_urb(remote->irq_urb); usb_free_urb(remote->irq_urb); - usb_buffer_free(interface_to_usbdev(interface), RECV_SIZE, remote->in_buffer, remote->in_dma); + usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); kfree(remote); } - - unlock_kernel(); - - info("USB Keyspan now disconnected"); } /* diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index ff9275057a18..7fce526560ca 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -98,7 +98,7 @@ struct mtouch_usb { dma_addr_t data_dma; struct urb *irq; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; char name[128]; char phys[64]; }; @@ -135,14 +135,14 @@ static void mtouchusb_irq(struct urb *urb, struct pt_regs *regs) goto exit; } - input_regs(&mtouch->input, regs); - input_report_key(&mtouch->input, BTN_TOUCH, + input_regs(mtouch->input, regs); + input_report_key(mtouch->input, BTN_TOUCH, MTOUCHUSB_GET_TOUCHED(mtouch->data)); - input_report_abs(&mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data)); - input_report_abs(&mtouch->input, ABS_Y, + input_report_abs(mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data)); + input_report_abs(mtouch->input, ABS_Y, (raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC) - MTOUCHUSB_GET_YC(mtouch->data)); - input_sync(&mtouch->input); + input_sync(mtouch->input); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -195,10 +195,10 @@ static void mtouchusb_free_buffers(struct usb_device *udev, struct mtouch_usb *m static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct mtouch_usb *mtouch; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); - char path[64]; int nRet; dbg("%s - called", __FUNCTION__); @@ -209,57 +209,55 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i dbg("%s - setting endpoint", __FUNCTION__); endpoint = &interface->endpoint[0].desc; - if (!(mtouch = kmalloc(sizeof(struct mtouch_usb), GFP_KERNEL))) { + mtouch = kzalloc(sizeof(struct mtouch_usb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mtouch || !input_dev) { err("%s - Out of memory.", __FUNCTION__); - return -ENOMEM; + goto fail1; } - memset(mtouch, 0, sizeof(struct mtouch_usb)); - mtouch->udev = udev; - dbg("%s - allocating buffers", __FUNCTION__); - if (mtouchusb_alloc_buffers(udev, mtouch)) { - mtouchusb_free_buffers(udev, mtouch); - kfree(mtouch); - return -ENOMEM; - } + if (mtouchusb_alloc_buffers(udev, mtouch)) + goto fail2; - mtouch->input.private = mtouch; - mtouch->input.open = mtouchusb_open; - mtouch->input.close = mtouchusb_close; - - usb_make_path(udev, path, 64); - sprintf(mtouch->phys, "%s/input0", path); - - mtouch->input.name = mtouch->name; - mtouch->input.phys = mtouch->phys; - usb_to_input_id(udev, &mtouch->input.id); - mtouch->input.dev = &intf->dev; - - mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - mtouch->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - mtouch->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - /* Used to Scale Compensated Data and Flip Y */ - mtouch->input.absmin[ABS_X] = MTOUCHUSB_MIN_XC; - mtouch->input.absmax[ABS_X] = raw_coordinates ? - MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC; - mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ; - mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT; - mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC; - mtouch->input.absmax[ABS_Y] = raw_coordinates ? - MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC; - mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ; - mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT; + mtouch->udev = udev; + mtouch->input = input_dev; if (udev->manufacturer) - strcat(mtouch->name, udev->manufacturer); - if (udev->product) - sprintf(mtouch->name, "%s %s", mtouch->name, udev->product); + strlcpy(mtouch->name, udev->manufacturer, sizeof(mtouch->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(mtouch->name, " ", sizeof(mtouch->name)); + strlcat(mtouch->name, udev->product, sizeof(mtouch->name)); + } if (!strlen(mtouch->name)) - sprintf(mtouch->name, "USB Touchscreen %04x:%04x", - mtouch->input.id.vendor, mtouch->input.id.product); + snprintf(mtouch->name, sizeof(mtouch->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, mtouch->phys, sizeof(mtouch->phys)); + strlcpy(mtouch->phys, "/input0", sizeof(mtouch->phys)); + + input_dev->name = mtouch->name; + input_dev->phys = mtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = mtouch; + + input_dev->open = mtouchusb_open; + input_dev->close = mtouchusb_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, MTOUCHUSB_MIN_XC, + raw_coordinates ? MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC, + MTOUCHUSB_XC_FUZZ, MTOUCHUSB_XC_FLAT); + input_set_abs_params(input_dev, ABS_Y, MTOUCHUSB_MIN_YC, + raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC, + MTOUCHUSB_YC_FUZZ, MTOUCHUSB_YC_FLAT); nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0), MTOUCHUSB_RESET, @@ -272,9 +270,7 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i mtouch->irq = usb_alloc_urb(0, GFP_KERNEL); if (!mtouch->irq) { dbg("%s - usb_alloc_urb failed: mtouch->irq", __FUNCTION__); - mtouchusb_free_buffers(udev, mtouch); - kfree(mtouch); - return -ENOMEM; + goto fail2; } dbg("%s - usb_fill_int_urb", __FUNCTION__); @@ -284,7 +280,7 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i mtouchusb_irq, mtouch, endpoint->bInterval); dbg("%s - input_register_device", __FUNCTION__); - input_register_device(&mtouch->input); + input_register_device(mtouch->input); nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0), MTOUCHUSB_ASYNC_REPORT, @@ -293,10 +289,13 @@ static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_i dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d", __FUNCTION__, nRet); - printk(KERN_INFO "input: %s on %s\n", mtouch->name, path); usb_set_intfdata(intf, mtouch); - return 0; + +fail2: mtouchusb_free_buffers(udev, mtouch); +fail1: input_free_device(input_dev); + kfree(mtouch); + return -ENOMEM; } static void mtouchusb_disconnect(struct usb_interface *intf) @@ -308,7 +307,7 @@ static void mtouchusb_disconnect(struct usb_interface *intf) if (mtouch) { dbg("%s - mtouch is initialized, cleaning up", __FUNCTION__); usb_kill_urb(mtouch->irq); - input_unregister_device(&mtouch->input); + input_unregister_device(mtouch->input); usb_free_urb(mtouch->irq); mtouchusb_free_buffers(interface_to_usbdev(intf), mtouch); kfree(mtouch); diff --git a/drivers/usb/input/pid.c b/drivers/usb/input/pid.c index acc71ec560e9..a00672c96644 100644 --- a/drivers/usb/input/pid.c +++ b/drivers/usb/input/pid.c @@ -262,6 +262,7 @@ int hid_pid_init(struct hid_device *hid) { struct hid_ff_pid *private; struct hid_input *hidinput = list_entry(&hid->inputs, struct hid_input, list); + struct input_dev *input_dev = hidinput->input; private = hid->ff_private = kzalloc(sizeof(struct hid_ff_pid), GFP_KERNEL); if (!private) @@ -281,11 +282,12 @@ int hid_pid_init(struct hid_device *hid) usb_fill_control_urb(private->urbffout, hid->dev, 0, (void *)&private->ffcr, private->ctrl_buffer, 8, hid_pid_ctrl_out, hid); - hidinput->input.upload_effect = hid_pid_upload_effect; - hidinput->input.flush = hid_pid_flush; - hidinput->input.ff_effects_max = 8; // A random default - set_bit(EV_FF, hidinput->input.evbit); - set_bit(EV_FF_STATUS, hidinput->input.evbit); + + input_dev->upload_effect = hid_pid_upload_effect; + input_dev->flush = hid_pid_flush; + input_dev->ff_effects_max = 8; // A random default + set_bit(EV_FF, input_dev->evbit); + set_bit(EV_FF_STATUS, input_dev->evbit); spin_lock_init(&private->lock); diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c index ad4afe7e5897..b7476233ef5d 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/usb/input/powermate.c @@ -68,7 +68,7 @@ struct powermate_device { struct usb_ctrlrequest *configcr; dma_addr_t configcr_dma; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; spinlock_t lock; int static_brightness; int pulse_speed; @@ -106,10 +106,10 @@ static void powermate_irq(struct urb *urb, struct pt_regs *regs) } /* handle updates to device state */ - input_regs(&pm->input, regs); - input_report_key(&pm->input, BTN_0, pm->data[0] & 0x01); - input_report_rel(&pm->input, REL_DIAL, pm->data[1]); - input_sync(&pm->input); + input_regs(pm->input, regs); + input_report_key(pm->input, BTN_0, pm->data[0] & 0x01); + input_report_rel(pm->input, REL_DIAL, pm->data[1]); + input_sync(pm->input); exit: retval = usb_submit_urb (urb, GFP_ATOMIC); @@ -153,10 +153,10 @@ static void powermate_sync_state(struct powermate_device *pm) Only values of 'arg' quite close to 255 are particularly useful/spectacular. */ - if (pm->pulse_speed < 255){ + if (pm->pulse_speed < 255) { op = 0; // divide arg = 255 - pm->pulse_speed; - } else if (pm->pulse_speed > 255){ + } else if (pm->pulse_speed > 255) { op = 2; // multiply arg = pm->pulse_speed - 255; } else { @@ -166,11 +166,11 @@ static void powermate_sync_state(struct powermate_device *pm) pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE ); pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op ); pm->requires_update &= ~UPDATE_PULSE_MODE; - }else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS){ + } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) { pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS ); pm->configcr->wIndex = cpu_to_le16( pm->static_brightness ); pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS; - }else{ + } else { printk(KERN_ERR "powermate: unknown update required"); pm->requires_update = 0; /* fudge the bug */ return; @@ -228,19 +228,19 @@ static void powermate_pulse_led(struct powermate_device *pm, int static_brightne spin_lock_irqsave(&pm->lock, flags); /* mark state updates which are required */ - if (static_brightness != pm->static_brightness){ + if (static_brightness != pm->static_brightness) { pm->static_brightness = static_brightness; pm->requires_update |= UPDATE_STATIC_BRIGHTNESS; } - if (pulse_asleep != pm->pulse_asleep){ + if (pulse_asleep != pm->pulse_asleep) { pm->pulse_asleep = pulse_asleep; pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS); } - if (pulse_awake != pm->pulse_awake){ + if (pulse_awake != pm->pulse_awake) { pm->pulse_awake = pulse_awake; pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS); } - if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table){ + if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) { pm->pulse_speed = pulse_speed; pm->pulse_table = pulse_table; pm->requires_update |= UPDATE_PULSE_MODE; @@ -283,6 +283,7 @@ static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_dev SLAB_ATOMIC, &pm->data_dma); if (!pm->data) return -1; + pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)), SLAB_ATOMIC, &pm->configcr_dma); if (!pm->configcr) @@ -308,8 +309,9 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct powermate_device *pm; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; + int err = -ENOMEM; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; @@ -323,42 +325,61 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i 0, interface->desc.bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (!(pm = kmalloc(sizeof(struct powermate_device), GFP_KERNEL))) - return -ENOMEM; - - memset(pm, 0, sizeof(struct powermate_device)); - pm->udev = udev; + pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pm || !input_dev) + goto fail1; - if (powermate_alloc_buffers(udev, pm)) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (powermate_alloc_buffers(udev, pm)) + goto fail2; pm->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!pm->irq) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (!pm->irq) + goto fail2; pm->config = usb_alloc_urb(0, GFP_KERNEL); - if (!pm->config) { - usb_free_urb(pm->irq); - powermate_free_buffers(udev, pm); - kfree(pm); - return -ENOMEM; - } + if (!pm->config) + goto fail3; + + pm->udev = udev; + pm->input = input_dev; + + usb_make_path(udev, pm->phys, sizeof(pm->phys)); + strlcpy(pm->phys, "/input0", sizeof(pm->phys)); spin_lock_init(&pm->lock); - init_input_dev(&pm->input); + + switch (le16_to_cpu(udev->descriptor.idProduct)) { + case POWERMATE_PRODUCT_NEW: + input_dev->name = pm_name_powermate; + break; + case POWERMATE_PRODUCT_OLD: + input_dev->name = pm_name_soundknob; + break; + default: + input_dev->name = pm_name_soundknob; + printk(KERN_WARNING "powermate: unknown product id %04x\n", + le16_to_cpu(udev->descriptor.idProduct)); + } + + input_dev->phys = pm->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = pm; + + input_dev->event = powermate_input_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); + input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); /* get a handle to the interrupt data pipe */ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - if(maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX){ - printk("powermate: Expected payload of %d--%d bytes, found %d bytes!\n", + if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) { + printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n", POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp); maxp = POWERMATE_PAYLOAD_SIZE_MAX; } @@ -371,35 +392,11 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i /* register our interrupt URB with the USB system */ if (usb_submit_urb(pm->irq, GFP_KERNEL)) { - powermate_free_buffers(udev, pm); - kfree(pm); - return -EIO; /* failure */ + err = -EIO; + goto fail4; } - switch (le16_to_cpu(udev->descriptor.idProduct)) { - case POWERMATE_PRODUCT_NEW: pm->input.name = pm_name_powermate; break; - case POWERMATE_PRODUCT_OLD: pm->input.name = pm_name_soundknob; break; - default: - pm->input.name = pm_name_soundknob; - printk(KERN_WARNING "powermate: unknown product id %04x\n", - le16_to_cpu(udev->descriptor.idProduct)); - } - - pm->input.private = pm; - pm->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC); - pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0); - pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL); - pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED); - usb_to_input_id(udev, &pm->input.id); - pm->input.event = powermate_input_event; - pm->input.dev = &intf->dev; - pm->input.phys = pm->phys; - - input_register_device(&pm->input); - - usb_make_path(udev, path, 64); - snprintf(pm->phys, 64, "%s/input0", path); - printk(KERN_INFO "input: %s on %s\n", pm->input.name, pm->input.phys); + input_register_device(pm->input); /* force an update of everything */ pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS; @@ -407,6 +404,13 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i usb_set_intfdata(intf, pm); return 0; + +fail4: usb_free_urb(pm->config); +fail3: usb_free_urb(pm->irq); +fail2: powermate_free_buffers(udev, pm); +fail1: input_free_device(input_dev); + kfree(pm); + return err; } /* Called when a USB device we've accepted ownership of is removed */ @@ -418,7 +422,7 @@ static void powermate_disconnect(struct usb_interface *intf) if (pm) { pm->requires_update = 0; usb_kill_urb(pm->irq); - input_unregister_device(&pm->input); + input_unregister_device(pm->input); usb_free_urb(pm->irq); usb_free_urb(pm->config); powermate_free_buffers(interface_to_usbdev(intf), pm); diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 4276c24a5080..3766ccc271be 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -68,7 +68,7 @@ struct touchkit_usb { dma_addr_t data_dma; struct urb *irq; struct usb_device *udev; - struct input_dev input; + struct input_dev *input; char name[128]; char phys[64]; }; @@ -115,12 +115,12 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs) y = TOUCHKIT_GET_Y(touchkit->data); } - input_regs(&touchkit->input, regs); - input_report_key(&touchkit->input, BTN_TOUCH, + input_regs(touchkit->input, regs); + input_report_key(touchkit->input, BTN_TOUCH, TOUCHKIT_GET_TOUCHED(touchkit->data)); - input_report_abs(&touchkit->input, ABS_X, x); - input_report_abs(&touchkit->input, ABS_Y, y); - input_sync(&touchkit->input); + input_report_abs(touchkit->input, ABS_X, x); + input_report_abs(touchkit->input, ABS_Y, y); + input_sync(touchkit->input); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -171,87 +171,81 @@ static void touchkit_free_buffers(struct usb_device *udev, static int touchkit_probe(struct usb_interface *intf, const struct usb_device_id *id) { - int ret; struct touchkit_usb *touchkit; + struct input_dev *input_dev; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); - char path[64]; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - touchkit = kmalloc(sizeof(struct touchkit_usb), GFP_KERNEL); - if (!touchkit) - return -ENOMEM; - - memset(touchkit, 0, sizeof(struct touchkit_usb)); - touchkit->udev = udev; - - if (touchkit_alloc_buffers(udev, touchkit)) { - ret = -ENOMEM; + touchkit = kzalloc(sizeof(struct touchkit_usb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!touchkit || !input_dev) goto out_free; - } - - touchkit->input.private = touchkit; - touchkit->input.open = touchkit_open; - touchkit->input.close = touchkit_close; - - usb_make_path(udev, path, 64); - sprintf(touchkit->phys, "%s/input0", path); - - touchkit->input.name = touchkit->name; - touchkit->input.phys = touchkit->phys; - usb_to_input_id(udev, &touchkit->input.id); - touchkit->input.dev = &intf->dev; - - touchkit->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - touchkit->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - touchkit->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - /* Used to Scale Compensated Data */ - touchkit->input.absmin[ABS_X] = TOUCHKIT_MIN_XC; - touchkit->input.absmax[ABS_X] = TOUCHKIT_MAX_XC; - touchkit->input.absfuzz[ABS_X] = TOUCHKIT_XC_FUZZ; - touchkit->input.absflat[ABS_X] = TOUCHKIT_XC_FLAT; - touchkit->input.absmin[ABS_Y] = TOUCHKIT_MIN_YC; - touchkit->input.absmax[ABS_Y] = TOUCHKIT_MAX_YC; - touchkit->input.absfuzz[ABS_Y] = TOUCHKIT_YC_FUZZ; - touchkit->input.absflat[ABS_Y] = TOUCHKIT_YC_FLAT; - - if (udev->manufacturer) - strcat(touchkit->name, udev->manufacturer); - if (udev->product) - sprintf(touchkit->name, "%s %s", touchkit->name, udev->product); - if (!strlen(touchkit->name)) - sprintf(touchkit->name, "USB Touchscreen %04x:%04x", - touchkit->input.id.vendor, touchkit->input.id.product); + if (touchkit_alloc_buffers(udev, touchkit)) + goto out_free; touchkit->irq = usb_alloc_urb(0, GFP_KERNEL); if (!touchkit->irq) { dbg("%s - usb_alloc_urb failed: touchkit->irq", __FUNCTION__); - ret = -ENOMEM; goto out_free_buffers; } + touchkit->udev = udev; + touchkit->input = input_dev; + + if (udev->manufacturer) + strlcpy(touchkit->name, udev->manufacturer, sizeof(touchkit->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(touchkit->name, " ", sizeof(touchkit->name)); + strlcat(touchkit->name, udev->product, sizeof(touchkit->name)); + } + + if (!strlen(touchkit->name)) + snprintf(touchkit->name, sizeof(touchkit->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, touchkit->phys, sizeof(touchkit->phys)); + strlcpy(touchkit->phys, "/input0", sizeof(touchkit->phys)); + + input_dev->name = touchkit->name; + input_dev->phys = touchkit->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = touchkit; + input_dev->open = touchkit_open; + input_dev->close = touchkit_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, TOUCHKIT_MIN_XC, TOUCHKIT_MAX_XC, + TOUCHKIT_XC_FUZZ, TOUCHKIT_XC_FLAT); + input_set_abs_params(input_dev, ABS_Y, TOUCHKIT_MIN_YC, TOUCHKIT_MAX_YC, + TOUCHKIT_YC_FUZZ, TOUCHKIT_YC_FLAT); + usb_fill_int_urb(touchkit->irq, touchkit->udev, - usb_rcvintpipe(touchkit->udev, 0x81), - touchkit->data, TOUCHKIT_REPORT_DATA_SIZE, - touchkit_irq, touchkit, endpoint->bInterval); + usb_rcvintpipe(touchkit->udev, 0x81), + touchkit->data, TOUCHKIT_REPORT_DATA_SIZE, + touchkit_irq, touchkit, endpoint->bInterval); - input_register_device(&touchkit->input); + input_register_device(touchkit->input); - printk(KERN_INFO "input: %s on %s\n", touchkit->name, path); usb_set_intfdata(intf, touchkit); - return 0; out_free_buffers: touchkit_free_buffers(udev, touchkit); out_free: + input_free_device(input_dev); kfree(touchkit); - return ret; + return -ENOMEM; } static void touchkit_disconnect(struct usb_interface *intf) @@ -265,8 +259,8 @@ static void touchkit_disconnect(struct usb_interface *intf) dbg("%s - touchkit is initialized, cleaning up", __FUNCTION__); usb_set_intfdata(intf, NULL); - input_unregister_device(&touchkit->input); usb_kill_urb(touchkit->irq); + input_unregister_device(touchkit->input); usb_free_urb(touchkit->irq); touchkit_free_buffers(interface_to_usbdev(intf), touchkit); kfree(touchkit); diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index 28987f15eeee..226b6f90a907 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -66,7 +66,7 @@ static unsigned char usb_kbd_keycode[256] = { }; struct usb_kbd { - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; unsigned char old[8]; struct urb *irq, *led; @@ -99,29 +99,29 @@ static void usb_kbd_irq(struct urb *urb, struct pt_regs *regs) goto resubmit; } - input_regs(&kbd->dev, regs); + input_regs(kbd->dev, regs); for (i = 0; i < 8; i++) - input_report_key(&kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1); + input_report_key(kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1); for (i = 2; i < 8; i++) { if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == kbd->new + 8) { if (usb_kbd_keycode[kbd->old[i]]) - input_report_key(&kbd->dev, usb_kbd_keycode[kbd->old[i]], 0); + input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0); else info("Unknown key (scancode %#x) released.", kbd->old[i]); } if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) { if (usb_kbd_keycode[kbd->new[i]]) - input_report_key(&kbd->dev, usb_kbd_keycode[kbd->new[i]], 1); + input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1); else info("Unknown key (scancode %#x) pressed.", kbd->new[i]); } } - input_sync(&kbd->dev); + input_sync(kbd->dev); memcpy(kbd->old, kbd->new, 8); @@ -227,12 +227,12 @@ static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd) static int usb_kbd_probe(struct usb_interface *iface, const struct usb_device_id *id) { - struct usb_device * dev = interface_to_usbdev(iface); + struct usb_device *dev = interface_to_usbdev(iface); struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_kbd *kbd; + struct input_dev *input_dev; int i, pipe, maxp; - char path[64]; interface = iface->cur_altsetting; @@ -240,37 +240,59 @@ static int usb_kbd_probe(struct usb_interface *iface, return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - if (!(kbd = kmalloc(sizeof(struct usb_kbd), GFP_KERNEL))) - return -ENOMEM; - memset(kbd, 0, sizeof(struct usb_kbd)); + kbd = kzalloc(sizeof(struct usb_kbd), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbd || !input_dev) + goto fail1; - if (usb_kbd_alloc_mem(dev, kbd)) { - usb_kbd_free_mem(dev, kbd); - kfree(kbd); - return -ENOMEM; - } + if (usb_kbd_alloc_mem(dev, kbd)) + goto fail2; kbd->usbdev = dev; + kbd->dev = input_dev; + + if (dev->manufacturer) + strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name)); + + if (dev->product) { + if (dev->manufacturer) + strlcat(kbd->name, " ", sizeof(kbd->name)); + strlcat(kbd->name, dev->product, sizeof(kbd->name)); + } + + if (!strlen(kbd->name)) + snprintf(kbd->name, sizeof(kbd->name), + "USB HIDBP Keyboard %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + + usb_make_path(dev, kbd->phys, sizeof(kbd->phys)); + strlcpy(kbd->phys, "/input0", sizeof(kbd->phys)); - kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); - kbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA); + input_dev->name = kbd->name; + input_dev->phys = kbd->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &iface->dev; + input_dev->private = kbd; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); + input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA); for (i = 0; i < 255; i++) - set_bit(usb_kbd_keycode[i], kbd->dev.keybit); - clear_bit(0, kbd->dev.keybit); + set_bit(usb_kbd_keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); - kbd->dev.private = kbd; - kbd->dev.event = usb_kbd_event; - kbd->dev.open = usb_kbd_open; - kbd->dev.close = usb_kbd_close; + input_dev->event = usb_kbd_event; + input_dev->open = usb_kbd_open; + input_dev->close = usb_kbd_close; usb_fill_int_urb(kbd->irq, dev, pipe, kbd->new, (maxp > 8 ? 8 : maxp), @@ -284,37 +306,22 @@ static int usb_kbd_probe(struct usb_interface *iface, kbd->cr->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); kbd->cr->wLength = cpu_to_le16(1); - usb_make_path(dev, path, 64); - sprintf(kbd->phys, "%s/input0", path); - - kbd->dev.name = kbd->name; - kbd->dev.phys = kbd->phys; - usb_to_input_id(dev, &kbd->dev.id); - kbd->dev.dev = &iface->dev; - - if (dev->manufacturer) - strcat(kbd->name, dev->manufacturer); - if (dev->product) - sprintf(kbd->name, "%s %s", kbd->name, dev->product); - - if (!strlen(kbd->name)) - sprintf(kbd->name, "USB HIDBP Keyboard %04x:%04x", - kbd->dev.id.vendor, kbd->dev.id.product); - usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0), (void *) kbd->cr, kbd->leds, 1, usb_kbd_led, kbd); kbd->led->setup_dma = kbd->cr_dma; kbd->led->transfer_dma = kbd->leds_dma; - kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP - | URB_NO_SETUP_DMA_MAP); + kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP); - input_register_device(&kbd->dev); - - printk(KERN_INFO "input: %s on %s\n", kbd->name, path); + input_register_device(kbd->dev); usb_set_intfdata(iface, kbd); return 0; + +fail2: usb_kbd_free_mem(dev, kbd); +fail1: input_free_device(input_dev); + kfree(kbd); + return -ENOMEM; } static void usb_kbd_disconnect(struct usb_interface *intf) @@ -324,7 +331,7 @@ static void usb_kbd_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (kbd) { usb_kill_urb(kbd->irq); - input_unregister_device(&kbd->dev); + input_unregister_device(kbd->dev); usb_kbd_free_mem(interface_to_usbdev(intf), kbd); kfree(kbd); } diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index 4104dec847fb..230f6b1b314a 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -50,7 +50,7 @@ struct usb_mouse { char name[128]; char phys[64]; struct usb_device *usbdev; - struct input_dev dev; + struct input_dev *dev; struct urb *irq; signed char *data; @@ -61,7 +61,7 @@ static void usb_mouse_irq(struct urb *urb, struct pt_regs *regs) { struct usb_mouse *mouse = urb->context; signed char *data = mouse->data; - struct input_dev *dev = &mouse->dev; + struct input_dev *dev = mouse->dev; int status; switch (urb->status) { @@ -115,14 +115,14 @@ static void usb_mouse_close(struct input_dev *dev) usb_kill_urb(mouse->irq); } -static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_id * id) +static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct usb_device * dev = interface_to_usbdev(intf); + struct usb_device *dev = interface_to_usbdev(intf); struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_mouse *mouse; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; interface = intf->cur_altsetting; @@ -130,59 +130,62 @@ static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_ return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - if (!(mouse = kmalloc(sizeof(struct usb_mouse), GFP_KERNEL))) - return -ENOMEM; - memset(mouse, 0, sizeof(struct usb_mouse)); + mouse = kzalloc(sizeof(struct usb_mouse), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mouse || !input_dev) + goto fail1; mouse->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &mouse->data_dma); - if (!mouse->data) { - kfree(mouse); - return -ENOMEM; - } + if (!mouse->data) + goto fail1; mouse->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!mouse->irq) { - usb_buffer_free(dev, 8, mouse->data, mouse->data_dma); - kfree(mouse); - return -ENODEV; - } + if (!mouse->irq) + goto fail2; mouse->usbdev = dev; + mouse->dev = input_dev; + + if (dev->manufacturer) + strlcpy(mouse->name, dev->manufacturer, sizeof(mouse->name)); - mouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - mouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - mouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y); - mouse->dev.keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA); - mouse->dev.relbit[0] |= BIT(REL_WHEEL); + if (dev->product) { + if (dev->manufacturer) + strlcat(mouse->name, " ", sizeof(mouse->name)); + strlcat(mouse->name, dev->product, sizeof(mouse->name)); + } - mouse->dev.private = mouse; - mouse->dev.open = usb_mouse_open; - mouse->dev.close = usb_mouse_close; + if (!strlen(mouse->name)) + snprintf(mouse->name, sizeof(mouse->name), + "USB HIDBP Mouse %04x:%04x", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); - usb_make_path(dev, path, 64); - sprintf(mouse->phys, "%s/input0", path); + usb_make_path(dev, mouse->phys, sizeof(mouse->phys)); + strlcat(mouse->phys, "/input0", sizeof(mouse->phys)); - mouse->dev.name = mouse->name; - mouse->dev.phys = mouse->phys; - usb_to_input_id(dev, &mouse->dev.id); - mouse->dev.dev = &intf->dev; + input_dev->name = mouse->name; + input_dev->phys = mouse->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; - if (dev->manufacturer) - strcat(mouse->name, dev->manufacturer); - if (dev->product) - sprintf(mouse->name, "%s %s", mouse->name, dev->product); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA); + input_dev->relbit[0] |= BIT(REL_WHEEL); - if (!strlen(mouse->name)) - sprintf(mouse->name, "USB HIDBP Mouse %04x:%04x", - mouse->dev.id.vendor, mouse->dev.id.product); + input_dev->private = mouse; + input_dev->open = usb_mouse_open; + input_dev->close = usb_mouse_close; usb_fill_int_urb(mouse->irq, dev, pipe, mouse->data, (maxp > 8 ? 8 : maxp), @@ -190,11 +193,15 @@ static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_ mouse->irq->transfer_dma = mouse->data_dma; mouse->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&mouse->dev); - printk(KERN_INFO "input: %s on %s\n", mouse->name, path); + input_register_device(mouse->dev); usb_set_intfdata(intf, mouse); return 0; + +fail2: usb_buffer_free(dev, 8, mouse->data, mouse->data_dma); +fail1: input_free_device(input_dev); + kfree(mouse); + return -ENOMEM; } static void usb_mouse_disconnect(struct usb_interface *intf) @@ -204,7 +211,7 @@ static void usb_mouse_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (mouse) { usb_kill_urb(mouse->irq); - input_unregister_device(&mouse->dev); + input_unregister_device(mouse->dev); usb_free_urb(mouse->irq); usb_buffer_free(interface_to_usbdev(intf), 8, mouse->data, mouse->data_dma); kfree(mouse); diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index 3b266af3048a..ea0f75773ae1 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -111,7 +111,7 @@ struct wacom_features { struct wacom { signed char *data; dma_addr_t data_dma; - struct input_dev dev; + struct input_dev *dev; struct usb_device *usbdev; struct urb *irq; struct wacom_features *features; @@ -135,7 +135,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int prox, pressure; int retval; @@ -225,7 +225,7 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int retval; switch (urb->status) { @@ -275,7 +275,7 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int retval; switch (urb->status) { @@ -318,7 +318,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int x, y; int retval; @@ -397,7 +397,7 @@ static int wacom_intuos_inout(struct urb *urb) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; int idx; /* tool number */ @@ -479,7 +479,7 @@ static void wacom_intuos_general(struct urb *urb) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; unsigned int t; /* general pen packet */ @@ -509,7 +509,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs) { struct wacom *wacom = urb->context; unsigned char *data = wacom->data; - struct input_dev *dev = &wacom->dev; + struct input_dev *dev = wacom->dev; unsigned int t; int idx; int retval; @@ -738,95 +738,83 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i { struct usb_device *dev = interface_to_usbdev(intf); struct usb_endpoint_descriptor *endpoint; - char rep_data[2] = {0x02, 0x02}; struct wacom *wacom; - char path[64]; + struct input_dev *input_dev; + char rep_data[2] = {0x02, 0x02}; - if (!(wacom = kmalloc(sizeof(struct wacom), GFP_KERNEL))) - return -ENOMEM; - memset(wacom, 0, sizeof(struct wacom)); + wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!wacom || !input_dev) + goto fail1; wacom->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); - if (!wacom->data) { - kfree(wacom); - return -ENOMEM; - } + if (!wacom->data) + goto fail1; wacom->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!wacom->irq) { - usb_buffer_free(dev, 10, wacom->data, wacom->data_dma); - kfree(wacom); - return -ENOMEM; - } + if (!wacom->irq) + goto fail2; + + wacom->usbdev = dev; + wacom->dev = input_dev; + usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); + strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); wacom->features = wacom_features + (id - wacom_ids); + if (wacom->features->pktlen > 10) + BUG(); + + input_dev->name = wacom->features->name; + usb_to_input_id(dev, &input_dev->id); - wacom->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); - wacom->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); + input_dev->cdev.dev = &intf->dev; + input_dev->private = wacom; + input_dev->open = wacom_open; + input_dev->close = wacom_close; + + input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); + input_set_abs_params(input_dev, ABS_X, 0, wacom->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); switch (wacom->features->type) { case GRAPHIRE: - wacom->dev.evbit[0] |= BIT(EV_REL); - wacom->dev.relbit[0] |= BIT(REL_WHEEL); - wacom->dev.absbit[0] |= BIT(ABS_DISTANCE); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); + input_dev->evbit[0] |= BIT(EV_REL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0); break; case INTUOS3: case CINTIQ: - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); - wacom->dev.absbit[0] |= BIT(ABS_RX) | BIT(ABS_RY); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); + input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0); /* fall through */ case INTUOS: - wacom->dev.evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); - wacom->dev.mscbit[0] |= BIT(MSC_SERIAL); - wacom->dev.relbit[0] |= BIT(REL_WHEEL); - wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) + input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->relbit[0] |= BIT(REL_WHEEL); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH) | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2); - wacom->dev.absbit[0] |= BIT(ABS_DISTANCE) | BIT(ABS_WHEEL) | BIT(ABS_TILT_X) | BIT(ABS_TILT_Y) | BIT(ABS_RZ) | BIT(ABS_THROTTLE); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); break; case PL: - wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER); break; } - wacom->dev.absmax[ABS_X] = wacom->features->x_max; - wacom->dev.absmax[ABS_Y] = wacom->features->y_max; - wacom->dev.absmax[ABS_PRESSURE] = wacom->features->pressure_max; - wacom->dev.absmax[ABS_DISTANCE] = wacom->features->distance_max; - wacom->dev.absmax[ABS_TILT_X] = 127; - wacom->dev.absmax[ABS_TILT_Y] = 127; - wacom->dev.absmax[ABS_WHEEL] = 1023; - - wacom->dev.absmax[ABS_RX] = 4097; - wacom->dev.absmax[ABS_RY] = 4097; - wacom->dev.absmin[ABS_RZ] = -900; - wacom->dev.absmax[ABS_RZ] = 899; - wacom->dev.absmin[ABS_THROTTLE] = -1023; - wacom->dev.absmax[ABS_THROTTLE] = 1023; - - wacom->dev.absfuzz[ABS_X] = 4; - wacom->dev.absfuzz[ABS_Y] = 4; - - wacom->dev.private = wacom; - wacom->dev.open = wacom_open; - wacom->dev.close = wacom_close; - - usb_make_path(dev, path, 64); - sprintf(wacom->phys, "%s/input0", path); - - wacom->dev.name = wacom->features->name; - wacom->dev.phys = wacom->phys; - usb_to_input_id(dev, &wacom->dev.id); - wacom->dev.dev = &intf->dev; - wacom->usbdev = dev; - endpoint = &intf->cur_altsetting->endpoint[0].desc; if (wacom->features->pktlen > 10) @@ -839,18 +827,20 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i wacom->irq->transfer_dma = wacom->data_dma; wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - input_register_device(&wacom->dev); + input_register_device(wacom->dev); /* ask the tablet to report tablet data */ usb_set_report(intf, 3, 2, rep_data, 2); /* repeat once (not sure why the first call often fails) */ usb_set_report(intf, 3, 2, rep_data, 2); - printk(KERN_INFO "input: %s on %s\n", wacom->features->name, path); - usb_set_intfdata(intf, wacom); - return 0; + +fail2: usb_buffer_free(dev, 10, wacom->data, wacom->data_dma); +fail1: input_free_device(input_dev); + kfree(wacom); + return -ENOMEM; } static void wacom_disconnect(struct usb_interface *intf) @@ -860,7 +850,7 @@ static void wacom_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (wacom) { usb_kill_urb(wacom->irq); - input_unregister_device(&wacom->dev); + input_unregister_device(wacom->dev); usb_free_urb(wacom->irq); usb_buffer_free(interface_to_usbdev(intf), 10, wacom->data, wacom->data_dma); kfree(wacom); diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index 18125e0bffa2..43112f040b6d 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -103,7 +103,7 @@ static struct usb_device_id xpad_table [] = { MODULE_DEVICE_TABLE (usb, xpad_table); struct usb_xpad { - struct input_dev dev; /* input device interface */ + struct input_dev *dev; /* input device interface */ struct usb_device *udev; /* usb device */ struct urb *irq_in; /* urb for interrupt in report */ @@ -125,7 +125,7 @@ struct usb_xpad { static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data, struct pt_regs *regs) { - struct input_dev *dev = &xpad->dev; + struct input_dev *dev = xpad->dev; input_regs(dev, regs); @@ -214,9 +214,9 @@ static void xpad_close (struct input_dev *dev) static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev (intf); - struct usb_xpad *xpad = NULL; + struct usb_xpad *xpad; + struct input_dev *input_dev; struct usb_endpoint_descriptor *ep_irq_in; - char path[64]; int i; for (i = 0; xpad_device[i].idVendor; i++) { @@ -225,89 +225,80 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id break; } - if ((xpad = kmalloc (sizeof(struct usb_xpad), GFP_KERNEL)) == NULL) { - err("cannot allocate memory for new pad"); - return -ENOMEM; - } - memset(xpad, 0, sizeof(struct usb_xpad)); + xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!xpad || !input_dev) + goto fail1; xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN, SLAB_ATOMIC, &xpad->idata_dma); - if (!xpad->idata) { - kfree(xpad); - return -ENOMEM; - } + if (!xpad->idata) + goto fail1; xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL); - if (!xpad->irq_in) { - err("cannot allocate memory for new pad irq urb"); - usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); - kfree(xpad); - return -ENOMEM; - } - - ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; - - usb_fill_int_urb(xpad->irq_in, udev, - usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), - xpad->idata, XPAD_PKT_LEN, xpad_irq_in, - xpad, ep_irq_in->bInterval); - xpad->irq_in->transfer_dma = xpad->idata_dma; - xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (!xpad->irq_in) + goto fail2; xpad->udev = udev; + xpad->dev = input_dev; + usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); + strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); - usb_to_input_id(udev, &xpad->dev.id); - xpad->dev.dev = &intf->dev; - xpad->dev.private = xpad; - xpad->dev.name = xpad_device[i].name; - xpad->dev.phys = xpad->phys; - xpad->dev.open = xpad_open; - xpad->dev.close = xpad_close; - - usb_make_path(udev, path, 64); - snprintf(xpad->phys, 64, "%s/input0", path); + input_dev->name = xpad_device[i].name; + input_dev->phys = xpad->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + input_dev->private = xpad; + input_dev->open = xpad_open; + input_dev->close = xpad_close; - xpad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; xpad_btn[i] >= 0; i++) - set_bit(xpad_btn[i], xpad->dev.keybit); + set_bit(xpad_btn[i], input_dev->keybit); for (i = 0; xpad_abs[i] >= 0; i++) { signed short t = xpad_abs[i]; - set_bit(t, xpad->dev.absbit); + set_bit(t, input_dev->absbit); switch (t) { case ABS_X: case ABS_Y: case ABS_RX: case ABS_RY: /* the two sticks */ - xpad->dev.absmax[t] = 32767; - xpad->dev.absmin[t] = -32768; - xpad->dev.absflat[t] = 128; - xpad->dev.absfuzz[t] = 16; + input_set_abs_params(input_dev, t, -32768, 32767, 16, 128); break; case ABS_Z: case ABS_RZ: /* the triggers */ - xpad->dev.absmax[t] = 255; - xpad->dev.absmin[t] = 0; + input_set_abs_params(input_dev, t, 0, 255, 0, 0); break; case ABS_HAT0X: case ABS_HAT0Y: /* the d-pad */ - xpad->dev.absmax[t] = 1; - xpad->dev.absmin[t] = -1; + input_set_abs_params(input_dev, t, -1, 1, 0, 0); break; } } - input_register_device(&xpad->dev); + ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(xpad->irq_in, udev, + usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), + xpad->idata, XPAD_PKT_LEN, xpad_irq_in, + xpad, ep_irq_in->bInterval); + xpad->irq_in->transfer_dma = xpad->idata_dma; + xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - printk(KERN_INFO "input: %s on %s", xpad->dev.name, path); + input_register_device(xpad->dev); usb_set_intfdata(intf, xpad); return 0; + +fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); +fail1: input_free_device(input_dev); + kfree(xpad); + return -ENOMEM; + } static void xpad_disconnect(struct usb_interface *intf) @@ -317,7 +308,7 @@ static void xpad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (xpad) { usb_kill_urb(xpad->irq_in); - input_unregister_device(&xpad->dev); + input_unregister_device(xpad->dev); usb_free_urb(xpad->irq_in); usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); kfree(xpad); diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index 58a176ef96a5..f526aebea502 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -54,6 +54,7 @@ #include #include #include +#include #include "map_to_7segment.h" #include "yealink.h" @@ -101,12 +102,12 @@ static const struct lcd_segment_map { }; struct yealink_dev { - struct input_dev idev; /* input device */ + struct input_dev *idev; /* input device */ struct usb_device *udev; /* usb device */ /* irq input channel */ struct yld_ctl_packet *irq_data; - dma_addr_t irq_dma; + dma_addr_t irq_dma; struct urb *urb_irq; /* control output channel */ @@ -237,7 +238,7 @@ static int map_p1k_to_key(int scancode) */ static void report_key(struct yealink_dev *yld, int key, struct pt_regs *regs) { - struct input_dev *idev = &yld->idev; + struct input_dev *idev = yld->idev; input_regs(idev, regs); if (yld->key_code >= 0) { @@ -809,8 +810,12 @@ static int usb_cleanup(struct yealink_dev *yld, int err) } if (yld->urb_ctl) usb_free_urb(yld->urb_ctl); - if (yld->idev.dev) - input_unregister_device(&yld->idev); + if (yld->idev) { + if (err) + input_free_device(yld->idev); + else + input_unregister_device(yld->idev); + } if (yld->ctl_req) usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), yld->ctl_req, yld->ctl_req_dma); @@ -857,7 +862,7 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct yealink_dev *yld; - char path[64]; + struct input_dev *input_dev; int ret, pipe, i; i = usb_match(udev); @@ -866,17 +871,21 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -EIO; - if ((endpoint->bmAttributes & 3) != 3) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -EIO; - if ((yld = kmalloc(sizeof(struct yealink_dev), GFP_KERNEL)) == NULL) + yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL); + if (!yld) return -ENOMEM; - memset(yld, 0, sizeof(*yld)); yld->udev = udev; + yld->idev = input_dev = input_allocate_device(); + if (!input_dev) + return usb_cleanup(yld, -ENOMEM); + /* allocate usb buffers */ yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN, SLAB_ATOMIC, &yld->irq_dma); @@ -935,42 +944,37 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) yld->urb_ctl->dev = udev; /* find out the physical bus location */ - if (usb_make_path(udev, path, sizeof(path)) > 0) - snprintf(yld->phys, sizeof(yld->phys)-1, "%s/input0", path); + usb_make_path(udev, yld->phys, sizeof(yld->phys)); + strlcat(yld->phys, "/input0", sizeof(yld->phys)); /* register settings for the input device */ - init_input_dev(&yld->idev); - yld->idev.private = yld; - yld->idev.id.bustype = BUS_USB; - yld->idev.id.vendor = le16_to_cpu(udev->descriptor.idVendor); - yld->idev.id.product = le16_to_cpu(udev->descriptor.idProduct); - yld->idev.id.version = le16_to_cpu(udev->descriptor.bcdDevice); - yld->idev.dev = &intf->dev; - yld->idev.name = yld_device[i].name; - yld->idev.phys = yld->phys; - /* yld->idev.event = input_ev; TODO */ - yld->idev.open = input_open; - yld->idev.close = input_close; + input_dev->name = yld_device[i].name; + input_dev->phys = yld->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &intf->dev; + + input_dev->private = yld; + input_dev->open = input_open; + input_dev->close = input_close; + /* input_dev->event = input_ev; TODO */ /* register available key events */ - yld->idev.evbit[0] = BIT(EV_KEY); + input_dev->evbit[0] = BIT(EV_KEY); for (i = 0; i < 256; i++) { int k = map_p1k_to_key(i); if (k >= 0) { - set_bit(k & 0xff, yld->idev.keybit); + set_bit(k & 0xff, input_dev->keybit); if (k >> 8) - set_bit(k >> 8, yld->idev.keybit); + set_bit(k >> 8, input_dev->keybit); } } - printk(KERN_INFO "input: %s on %s\n", yld->idev.name, path); - - input_register_device(&yld->idev); + input_register_device(yld->idev); usb_set_intfdata(intf, yld); /* clear visible elements */ - for (i=0; i Date: Thu, 15 Sep 2005 02:01:48 -0500 Subject: [PATCH 0571/1519] [PATCH] Input: convert ucb1x00-ts to dynamic input_dev allocation Input: convert ucb1x00-ts to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/mfd/ucb1x00-ts.c | 43 ++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index a260f83bcb02..585cded3d365 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -40,7 +40,7 @@ struct ucb1x00_ts { - struct input_dev idev; + struct input_dev *idev; struct ucb1x00 *ucb; wait_queue_head_t irq_wait; @@ -56,16 +56,16 @@ static int adcsync; static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y) { - input_report_abs(&ts->idev, ABS_X, x); - input_report_abs(&ts->idev, ABS_Y, y); - input_report_abs(&ts->idev, ABS_PRESSURE, pressure); - input_sync(&ts->idev); + input_report_abs(ts->idev, ABS_X, x); + input_report_abs(ts->idev, ABS_Y, y); + input_report_abs(ts->idev, ABS_PRESSURE, pressure); + input_sync(ts->idev); } static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts) { - input_report_abs(&ts->idev, ABS_PRESSURE, 0); - input_sync(&ts->idev); + input_report_abs(ts->idev, ABS_PRESSURE, 0); + input_sync(ts->idev); } /* @@ -341,26 +341,30 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) { struct ucb1x00_ts *ts; - ts = kmalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); + ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); if (!ts) return -ENOMEM; - memset(ts, 0, sizeof(struct ucb1x00_ts)); + ts->idev = input_allocate_device(); + if (!ts->idev) { + kfree(ts); + return -ENOMEM; + } ts->ucb = dev->ucb; ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; - ts->idev.name = "Touchscreen panel"; - ts->idev.id.product = ts->ucb->id; - ts->idev.open = ucb1x00_ts_open; - ts->idev.close = ucb1x00_ts_close; + ts->idev->name = "Touchscreen panel"; + ts->idev->id.product = ts->ucb->id; + ts->idev->open = ucb1x00_ts_open; + ts->idev->close = ucb1x00_ts_close; - __set_bit(EV_ABS, ts->idev.evbit); - __set_bit(ABS_X, ts->idev.absbit); - __set_bit(ABS_Y, ts->idev.absbit); - __set_bit(ABS_PRESSURE, ts->idev.absbit); + __set_bit(EV_ABS, ts->idev->evbit); + __set_bit(ABS_X, ts->idev->absbit); + __set_bit(ABS_Y, ts->idev->absbit); + __set_bit(ABS_PRESSURE, ts->idev->absbit); - input_register_device(&ts->idev); + input_register_device(ts->idev); dev->priv = ts; @@ -370,7 +374,8 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) static void ucb1x00_ts_remove(struct ucb1x00_dev *dev) { struct ucb1x00_ts *ts = dev->priv; - input_unregister_device(&ts->idev); + + input_unregister_device(ts->idev); kfree(ts); } -- GitLab From eca1ed196cd5b523c1057204cd3672555ad58dfe Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:46 -0500 Subject: [PATCH 0572/1519] [PATCH] drivers/input/touchscreen: convert to dynamic input_dev allocation Input: convert drivers/input/touchscreen to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/touchscreen/corgi_ts.c | 89 ++++++------ drivers/input/touchscreen/elo.c | 89 ++++++------ drivers/input/touchscreen/gunze.c | 66 ++++----- drivers/input/touchscreen/h3600_ts_input.c | 149 ++++++++------------- drivers/input/touchscreen/hp680_ts_input.c | 50 +++---- drivers/input/touchscreen/mk712.c | 80 +++++------ drivers/input/touchscreen/mtouch.c | 64 ++++----- 7 files changed, 279 insertions(+), 308 deletions(-) diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 4c7fbe550365..40ae183ba1cd 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -41,8 +41,7 @@ struct ts_event { }; struct corgi_ts { - char phys[32]; - struct input_dev input; + struct input_dev *input; struct timer_list timer; struct ts_event tc; int pendown; @@ -182,14 +181,12 @@ static void new_data(struct corgi_ts *corgi_ts, struct pt_regs *regs) if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0) return; - if (regs) - input_regs(&corgi_ts->input, regs); - - input_report_abs(&corgi_ts->input, ABS_X, corgi_ts->tc.x); - input_report_abs(&corgi_ts->input, ABS_Y, corgi_ts->tc.y); - input_report_abs(&corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure); - input_report_key(&corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0)); - input_sync(&corgi_ts->input); + input_regs(corgi_ts->input, regs); + input_report_abs(corgi_ts->input, ABS_X, corgi_ts->tc.x); + input_report_abs(corgi_ts->input, ABS_Y, corgi_ts->tc.y); + input_report_abs(corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure); + input_report_key(corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0)); + input_sync(corgi_ts->input); } static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer, struct pt_regs *regs) @@ -273,39 +270,44 @@ static int __init corgits_probe(struct device *dev) { struct corgi_ts *corgi_ts; struct platform_device *pdev = to_platform_device(dev); + struct input_dev *input_dev; + int err = -ENOMEM; - if (!(corgi_ts = kmalloc(sizeof(struct corgi_ts), GFP_KERNEL))) - return -ENOMEM; + corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!corgi_ts || !input_dev) + goto fail; dev_set_drvdata(dev, corgi_ts); - memset(corgi_ts, 0, sizeof(struct corgi_ts)); - corgi_ts->machinfo = dev->platform_data; corgi_ts->irq_gpio = platform_get_irq(pdev, 0); if (corgi_ts->irq_gpio < 0) { - kfree(corgi_ts); - return -ENODEV; + err = -ENODEV; + goto fail; } - init_input_dev(&corgi_ts->input); - corgi_ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - corgi_ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - input_set_abs_params(&corgi_ts->input, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); - input_set_abs_params(&corgi_ts->input, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); - input_set_abs_params(&corgi_ts->input, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); + corgi_ts->input = input_dev; - strcpy(corgi_ts->phys, "corgits/input0"); + init_timer(&corgi_ts->timer); + corgi_ts->timer.data = (unsigned long) corgi_ts; + corgi_ts->timer.function = corgi_ts_timer; - corgi_ts->input.private = corgi_ts; - corgi_ts->input.name = "Corgi Touchscreen"; - corgi_ts->input.dev = dev; - corgi_ts->input.phys = corgi_ts->phys; - corgi_ts->input.id.bustype = BUS_HOST; - corgi_ts->input.id.vendor = 0x0001; - corgi_ts->input.id.product = 0x0002; - corgi_ts->input.id.version = 0x0100; + input_dev->name = "Corgi Touchscreen"; + input_dev->phys = "corgits/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0002; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = dev; + input_dev->private = corgi_ts; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN); @@ -319,25 +321,24 @@ static int __init corgits_probe(struct device *dev) corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS); mdelay(5); - init_timer(&corgi_ts->timer); - corgi_ts->timer.data = (unsigned long) corgi_ts; - corgi_ts->timer.function = corgi_ts_timer; - - input_register_device(&corgi_ts->input); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - if (request_irq(corgi_ts->irq_gpio, ts_interrupt, SA_INTERRUPT, "ts", corgi_ts)) { - input_unregister_device(&corgi_ts->input); - kfree(corgi_ts); - return -EBUSY; + err = -EBUSY; + goto fail; } + input_register_device(corgi_ts->input); + + corgi_ts->power_mode = PWR_MODE_ACTIVE; + /* Enable Falling Edge */ set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); - printk(KERN_INFO "input: Corgi Touchscreen Registered\n"); - return 0; + + fail: input_free_device(input_dev); + kfree(corgi_ts); + return err; + } static int corgits_remove(struct device *dev) @@ -347,7 +348,7 @@ static int corgits_remove(struct device *dev) free_irq(corgi_ts->irq_gpio, NULL); del_timer_sync(&corgi_ts->timer); corgi_ts->machinfo->put_hsync(); - input_unregister_device(&corgi_ts->input); + input_unregister_device(corgi_ts->input); kfree(corgi_ts); return 0; } diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index 3cdc9cab688d..c86a2eb310fd 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -36,14 +36,12 @@ MODULE_LICENSE("GPL"); #define ELO_MAX_LENGTH 10 -static char *elo_name = "Elo Serial TouchScreen"; - /* * Per-touchscreen data. */ struct elo { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int id; int idx; @@ -54,7 +52,7 @@ struct elo { static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->csum += elo->data[elo->idx] = data; @@ -80,7 +78,7 @@ static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_r input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]); input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]); input_report_abs(dev, ABS_PRESSURE, (elo->data[8] << 8) | elo->data[7]); - input_report_key(dev, BTN_TOUCH, elo->data[2] & 3); + input_report_key(dev, BTN_TOUCH, elo->data[8] || elo->data[7]); input_sync(dev); } elo->idx = 0; @@ -91,7 +89,7 @@ static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_r static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->data[elo->idx] = data; @@ -129,7 +127,7 @@ static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_re case 5: if ((data & 0xf0) == 0) { input_report_abs(dev, ABS_PRESSURE, elo->data[5]); - input_report_key(dev, BTN_TOUCH, elo->data[5]); + input_report_key(dev, BTN_TOUCH, !!elo->data[5]); } input_sync(dev); elo->idx = 0; @@ -139,7 +137,7 @@ static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_re static void elo_process_data_3(struct elo* elo, unsigned char data, struct pt_regs *regs) { - struct input_dev *dev = &elo->dev; + struct input_dev *dev = elo->dev; elo->data[elo->idx] = data; @@ -191,7 +189,7 @@ static void elo_disconnect(struct serio *serio) { struct elo* elo = serio_get_drvdata(serio); - input_unregister_device(&elo->dev); + input_unregister_device(elo->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(elo); @@ -206,67 +204,68 @@ static void elo_disconnect(struct serio *serio) static int elo_connect(struct serio *serio, struct serio_driver *drv) { struct elo *elo; + struct input_dev *input_dev; int err; - if (!(elo = kmalloc(sizeof(struct elo), GFP_KERNEL))) - return -ENOMEM; + elo = kzalloc(sizeof(struct elo), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!elo || !input_dev) { + err = -ENOMEM; + goto fail; + } - memset(elo, 0, sizeof(struct elo)); + elo->serio = serio; + elo->id = serio->id.id; + elo->dev = input_dev; + snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys); - init_input_dev(&elo->dev); - elo->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - elo->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_dev->private = elo; + input_dev->name = "Elo Serial TouchScreen"; + input_dev->phys = elo->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_ELO; + input_dev->id.product = elo->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; - elo->id = serio->id.id; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); switch (elo->id) { case 0: /* 10-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0); break; case 1: /* 6-byte protocol */ - input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 15, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0); case 2: /* 4-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); break; case 3: /* 3-byte protocol */ - input_set_abs_params(&elo->dev, ABS_X, 0, 255, 0, 0); - input_set_abs_params(&elo->dev, ABS_Y, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0); break; } - elo->serio = serio; - - sprintf(elo->phys, "%s/input0", serio->phys); - - elo->dev.private = elo; - elo->dev.name = elo_name; - elo->dev.phys = elo->phys; - elo->dev.id.bustype = BUS_RS232; - elo->dev.id.vendor = SERIO_ELO; - elo->dev.id.product = elo->id; - elo->dev.id.version = 0x0100; - serio_set_drvdata(serio, elo); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(elo); - return err; - } - - input_register_device(&elo->dev); - - printk(KERN_INFO "input: %s on %s\n", elo_name, serio->phys); + if (err) + goto fail; + input_register_device(elo->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(elo); + return err; } /* diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c index 53a27e43dd23..466da190ceec 100644 --- a/drivers/input/touchscreen/gunze.c +++ b/drivers/input/touchscreen/gunze.c @@ -48,14 +48,12 @@ MODULE_LICENSE("GPL"); #define GUNZE_MAX_LENGTH 10 -static char *gunze_name = "Gunze AHL-51S TouchScreen"; - /* * Per-touchscreen data. */ struct gunze { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int idx; unsigned char data[GUNZE_MAX_LENGTH]; @@ -64,7 +62,7 @@ struct gunze { static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs) { - struct input_dev *dev = &gunze->dev; + struct input_dev *dev = gunze->dev; if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' || (gunze->data[0] != 'T' && gunze->data[0] != 'R')) { @@ -100,11 +98,13 @@ static irqreturn_t gunze_interrupt(struct serio *serio, static void gunze_disconnect(struct serio *serio) { - struct gunze* gunze = serio_get_drvdata(serio); + struct gunze *gunze = serio_get_drvdata(serio); - input_unregister_device(&gunze->dev); + input_get_device(gunze->dev); + input_unregister_device(gunze->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(gunze->dev); kfree(gunze); } @@ -117,45 +117,45 @@ static void gunze_disconnect(struct serio *serio) static int gunze_connect(struct serio *serio, struct serio_driver *drv) { struct gunze *gunze; + struct input_dev *input_dev; int err; - if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL))) - return -ENOMEM; - - memset(gunze, 0, sizeof(struct gunze)); - - init_input_dev(&gunze->dev); - gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - input_set_abs_params(&gunze->dev, ABS_X, 24, 1000, 0, 0); - input_set_abs_params(&gunze->dev, ABS_Y, 24, 1000, 0, 0); + gunze = kzalloc(sizeof(struct gunze), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!gunze || !input_dev) { + err = -ENOMEM; + goto fail; + } gunze->serio = serio; - + gunze->dev = input_dev; sprintf(gunze->phys, "%s/input0", serio->phys); - gunze->dev.private = gunze; - gunze->dev.name = gunze_name; - gunze->dev.phys = gunze->phys; - gunze->dev.id.bustype = BUS_RS232; - gunze->dev.id.vendor = SERIO_GUNZE; - gunze->dev.id.product = 0x0051; - gunze->dev.id.version = 0x0100; + input_dev->private = gunze; + input_dev->name = "Gunze AHL-51S TouchScreen"; + input_dev->phys = gunze->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_GUNZE; + input_dev->id.product = 0x0051; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0); serio_set_drvdata(serio, gunze); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(gunze); - return err; - } - - input_register_device(&gunze->dev); - - printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys); + if (err) + goto fail; + input_register_device(gunze->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(gunze); + return err; } /* diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c index bcfa1e36f957..a18d56bdafd9 100644 --- a/drivers/input/touchscreen/h3600_ts_input.c +++ b/drivers/input/touchscreen/h3600_ts_input.c @@ -39,7 +39,6 @@ #include #include #include -#include /* SA1100 serial defines */ #include @@ -93,16 +92,12 @@ MODULE_LICENSE("GPL"); #define H3600_SCANCODE_LEFT 8 /* 8 -> left */ #define H3600_SCANCODE_DOWN 9 /* 9 -> down */ -static char *h3600_name = "H3600 TouchScreen"; - /* * Per-touchscreen data. */ struct h3600_dev { - struct input_dev dev; - struct pm_dev *pm_dev; + struct input_dev *dev; struct serio *serio; - struct pm_dev *pm_dev; unsigned char event; /* event ID from packet */ unsigned char chksum; unsigned char len; @@ -163,33 +158,6 @@ unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr) return 0; } -static int suspended = 0; -static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req, - void *data) -{ - struct input_dev *dev = (struct input_dev *) data; - - switch (req) { - case PM_SUSPEND: /* enter D1-D3 */ - suspended = 1; - h3600_flite_power(dev, FLITE_PWR_OFF); - break; - case PM_BLANK: - if (!suspended) - h3600_flite_power(dev, FLITE_PWR_OFF); - break; - case PM_RESUME: /* enter D0 */ - /* same as unblank */ - case PM_UNBLANK: - if (suspended) { - //initSerial(); - suspended = 0; - } - h3600_flite_power(dev, FLITE_PWR_ON); - break; - } - return 0; -} #endif /* @@ -199,7 +167,7 @@ static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req, */ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs) { - struct input_dev *dev = &ts->dev; + struct input_dev *dev = ts->dev; static int touched = 0; int key, down = 0; @@ -295,6 +263,7 @@ static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs) static int h3600ts_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { +#if 0 struct h3600_dev *ts = dev->private; switch (type) { @@ -304,6 +273,8 @@ static int h3600ts_event(struct input_dev *dev, unsigned int type, } } return -1; +#endif + return 0; } /* @@ -380,14 +351,48 @@ static irqreturn_t h3600ts_interrupt(struct serio *serio, unsigned char data, static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) { struct h3600_dev *ts; + struct input_dev *input_dev; int err; - if (!(ts = kmalloc(sizeof(struct h3600_dev), GFP_KERNEL))) - return -ENOMEM; + ts = kzalloc(sizeof(struct h3600_dev), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto fail1; + } - memset(ts, 0, sizeof(struct h3600_dev)); + ts->serio = serio; + ts->dev = input_dev; + sprintf(ts->phys, "%s/input0", serio->phys); - init_input_dev(&ts->dev); + input_dev->name = "H3600 TouchScreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_H3600; + input_dev->id.product = 0x0666; /* FIXME !!! We can ask the hardware */ + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = ts; + + input_dev->event = h3600ts_event; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR); + input_dev->ledbit[0] = BIT(LED_SLEEP); + input_set_abs_params(input_dev, ABS_X, 60, 985, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 35, 1024, 0, 0); + + set_bit(KEY_RECORD, input_dev->keybit); + set_bit(KEY_Q, input_dev->keybit); + set_bit(KEY_PROG1, input_dev->keybit); + set_bit(KEY_PROG2, input_dev->keybit); + set_bit(KEY_PROG3, input_dev->keybit); + set_bit(KEY_UP, input_dev->keybit); + set_bit(KEY_RIGHT, input_dev->keybit); + set_bit(KEY_LEFT, input_dev->keybit); + set_bit(KEY_DOWN, input_dev->keybit); + set_bit(KEY_ENTER, input_dev->keybit); + set_bit(KEY_SUSPEND, input_dev->keybit); + set_bit(BTN_TOUCH, input_dev->keybit); /* Device specific stuff */ set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES); @@ -397,73 +402,35 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv) SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM, "h3600_action", &ts->dev)) { printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n"); - kfree(ts); - return -EBUSY; + err = -EBUSY; + goto fail2; } if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler, SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM, "h3600_suspend", &ts->dev)) { - free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev); printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n"); - kfree(ts); - return -EBUSY; + err = -EBUSY; + goto fail3; } - /* Now we have things going we setup our input device */ - ts->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR); - ts->dev.ledbit[0] = BIT(LED_SLEEP); - input_set_abs_params(&ts->dev, ABS_X, 60, 985, 0, 0); - input_set_abs_params(&ts->dev, ABS_Y, 35, 1024, 0, 0); - - set_bit(KEY_RECORD, ts->dev.keybit); - set_bit(KEY_Q, ts->dev.keybit); - set_bit(KEY_PROG1, ts->dev.keybit); - set_bit(KEY_PROG2, ts->dev.keybit); - set_bit(KEY_PROG3, ts->dev.keybit); - set_bit(KEY_UP, ts->dev.keybit); - set_bit(KEY_RIGHT, ts->dev.keybit); - set_bit(KEY_LEFT, ts->dev.keybit); - set_bit(KEY_DOWN, ts->dev.keybit); - set_bit(KEY_ENTER, ts->dev.keybit); - ts->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); - ts->dev.keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND); - - ts->serio = serio; - - sprintf(ts->phys, "%s/input0", serio->phys); - - ts->dev.event = h3600ts_event; - ts->dev.private = ts; - ts->dev.name = h3600_name; - ts->dev.phys = ts->phys; - ts->dev.id.bustype = BUS_RS232; - ts->dev.id.vendor = SERIO_H3600; - ts->dev.id.product = 0x0666; /* FIXME !!! We can ask the hardware */ - ts->dev.id.version = 0x0100; - serio_set_drvdata(serio, ts); err = serio_open(serio, drv); - if (err) { - free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts); - free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts); - serio_set_drvdata(serio, NULL); - kfree(ts); + if (err) return err; - } //h3600_flite_control(1, 25); /* default brightness */ -#ifdef CONFIG_PM - ts->pm_dev = pm_register(PM_ILLUMINATION_DEV, PM_SYS_LIGHT, - h3600ts_pm_callback); - printk("registered pm callback\n"); -#endif - input_register_device(&ts->dev); - - printk(KERN_INFO "input: %s on %s\n", h3600_name, serio->phys); + input_register_device(ts->dev); return 0; + +fail3: free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev); +fail2: free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev); +fail1: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(ts); + return err; } /* @@ -476,9 +443,11 @@ static void h3600ts_disconnect(struct serio *serio) free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev); free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev); - input_unregister_device(&ts->dev); + input_get_device(ts->dev); + input_unregister_device(ts->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(ts->dev); kfree(ts); } diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index 7e1404441eca..957dd5a1b15e 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -21,10 +21,8 @@ static void do_softint(void *data); -static struct input_dev hp680_ts_dev; +static struct input_dev *hp680_ts_dev; static DECLARE_WORK(work, do_softint, 0); -static char *hp680_ts_name = "HP Jornada touchscreen"; -static char *hp680_ts_phys = "input0"; static void do_softint(void *data) { @@ -58,14 +56,14 @@ static void do_softint(void *data) } if (touched) { - input_report_key(&hp680_ts_dev, BTN_TOUCH, 1); - input_report_abs(&hp680_ts_dev, ABS_X, absx); - input_report_abs(&hp680_ts_dev, ABS_Y, absy); + input_report_key(hp680_ts_dev, BTN_TOUCH, 1); + input_report_abs(hp680_ts_dev, ABS_X, absx); + input_report_abs(hp680_ts_dev, ABS_Y, absy); } else { - input_report_key(&hp680_ts_dev, BTN_TOUCH, 0); + input_report_key(hp680_ts_dev, BTN_TOUCH, 0); } - input_sync(&hp680_ts_dev); + input_sync(hp680_ts_dev); enable_irq(HP680_TS_IRQ); } @@ -92,27 +90,29 @@ static int __init hp680_ts_init(void) scpcr |= SCPCR_TS_ENABLE; ctrl_outw(scpcr, SCPCR); - memset(&hp680_ts_dev, 0, sizeof(hp680_ts_dev)); - init_input_dev(&hp680_ts_dev); + hp680_ts_dev = input_allocate_device(); + if (!hp680_ts_dev) + return -ENOMEM; - hp680_ts_dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); - hp680_ts_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - hp680_ts_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + hp680_ts_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY); + hp680_ts_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + hp680_ts_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - hp680_ts_dev.absmin[ABS_X] = HP680_TS_ABS_X_MIN; - hp680_ts_dev.absmin[ABS_Y] = HP680_TS_ABS_Y_MIN; - hp680_ts_dev.absmax[ABS_X] = HP680_TS_ABS_X_MAX; - hp680_ts_dev.absmax[ABS_Y] = HP680_TS_ABS_Y_MAX; + hp680_ts_dev->absmin[ABS_X] = HP680_TS_ABS_X_MIN; + hp680_ts_dev->absmin[ABS_Y] = HP680_TS_ABS_Y_MIN; + hp680_ts_dev->absmax[ABS_X] = HP680_TS_ABS_X_MAX; + hp680_ts_dev->absmax[ABS_Y] = HP680_TS_ABS_Y_MAX; - hp680_ts_dev.name = hp680_ts_name; - hp680_ts_dev.phys = hp680_ts_phys; - input_register_device(&hp680_ts_dev); + hp680_ts_dev->name = "HP Jornada touchscreen"; + hp680_ts_dev->phys = "hp680_ts/input0"; - if (request_irq - (HP680_TS_IRQ, hp680_ts_interrupt, SA_INTERRUPT, MODNAME, 0) < 0) { - printk(KERN_ERR "hp680_touchscreen.c : Can't allocate irq %d\n", + input_register_device(hp680_ts_dev); + + if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, + SA_INTERRUPT, MODNAME, 0) < 0) { + printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", HP680_TS_IRQ); - input_unregister_device(&hp680_ts_dev); + input_unregister_device(hp680_ts_dev); return -EBUSY; } @@ -124,7 +124,7 @@ static void __exit hp680_ts_exit(void) free_irq(HP680_TS_IRQ, 0); cancel_delayed_work(&work); flush_scheduled_work(); - input_unregister_device(&hp680_ts_dev); + input_unregister_device(hp680_ts_dev); } module_init(hp680_ts_init); diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c index afaaebe5225b..4844d250a5eb 100644 --- a/drivers/input/touchscreen/mk712.c +++ b/drivers/input/touchscreen/mk712.c @@ -77,7 +77,7 @@ MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller"); #define MK712_READ_ONE_POINT 0x20 #define MK712_POWERUP 0x40 -static struct input_dev mk712_dev; +static struct input_dev *mk712_dev; static DEFINE_SPINLOCK(mk712_lock); static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) @@ -88,7 +88,7 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) static unsigned short last_y; spin_lock(&mk712_lock); - input_regs(&mk712_dev, regs); + input_regs(mk712_dev, regs); status = inb(mk712_io + MK712_STATUS); @@ -100,7 +100,7 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (~status & MK712_STATUS_TOUCH) { debounce = 1; - input_report_key(&mk712_dev, BTN_TOUCH, 0); + input_report_key(mk712_dev, BTN_TOUCH, 0); goto end; } @@ -110,15 +110,15 @@ static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs) goto end; } - input_report_key(&mk712_dev, BTN_TOUCH, 1); - input_report_abs(&mk712_dev, ABS_X, last_x); - input_report_abs(&mk712_dev, ABS_Y, last_y); + input_report_key(mk712_dev, BTN_TOUCH, 1); + input_report_abs(mk712_dev, ABS_X, last_x); + input_report_abs(mk712_dev, ABS_Y, last_y); end: last_x = inw(mk712_io + MK712_X) & 0x0fff; last_y = inw(mk712_io + MK712_Y) & 0x0fff; - input_sync(&mk712_dev); + input_sync(mk712_dev); spin_unlock(&mk712_lock); return IRQ_HANDLED; } @@ -154,30 +154,11 @@ static void mk712_close(struct input_dev *dev) spin_unlock_irqrestore(&mk712_lock, flags); } -static struct input_dev mk712_dev = { - .evbit = { BIT(EV_KEY) | BIT(EV_ABS) }, - .keybit = { [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) }, - .absbit = { BIT(ABS_X) | BIT(ABS_Y) }, - .open = mk712_open, - .close = mk712_close, - .name = "ICS MicroClock MK712 TouchScreen", - .phys = "isa0260/input0", - .absmin = { [ABS_X] = 0, [ABS_Y] = 0 }, - .absmax = { [ABS_X] = 0xfff, [ABS_Y] = 0xfff }, - .absfuzz = { [ABS_X] = 88, [ABS_Y] = 88 }, - .id = { - .bustype = BUS_ISA, - .vendor = 0x0005, - .product = 0x0001, - .version = 0x0100, - }, -}; - int __init mk712_init(void) { + int err; - if(!request_region(mk712_io, 8, "mk712")) - { + if (!request_region(mk712_io, 8, "mk712")) { printk(KERN_WARNING "mk712: unable to get IO region\n"); return -ENODEV; } @@ -188,28 +169,49 @@ int __init mk712_init(void) (inw(mk712_io + MK712_Y) & 0xf000) || (inw(mk712_io + MK712_STATUS) & 0xf333)) { printk(KERN_WARNING "mk712: device not present\n"); - release_region(mk712_io, 8); - return -ENODEV; + err = -ENODEV; + goto fail; } - if(request_irq(mk712_irq, mk712_interrupt, 0, "mk712", &mk712_dev)) - { - printk(KERN_WARNING "mk712: unable to get IRQ\n"); - release_region(mk712_io, 8); - return -EBUSY; + if (!(mk712_dev = input_allocate_device())) { + printk(KERN_ERR "mk712: not enough memory\n"); + err = -ENOMEM; + goto fail; } - input_register_device(&mk712_dev); + mk712_dev->name = "ICS MicroClock MK712 TouchScreen"; + mk712_dev->phys = "isa0260/input0"; + mk712_dev->id.bustype = BUS_ISA; + mk712_dev->id.vendor = 0x0005; + mk712_dev->id.product = 0x0001; + mk712_dev->id.version = 0x0100; + + mk712_dev->open = mk712_open; + mk712_dev->close = mk712_close; - printk(KERN_INFO "input: ICS MicroClock MK712 TouchScreen at %#x irq %d\n", mk712_io, mk712_irq); + mk712_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + mk712_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(mk712_dev, ABS_X, 0, 0xfff, 88, 0); + input_set_abs_params(mk712_dev, ABS_Y, 0, 0xfff, 88, 0); + if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) { + printk(KERN_WARNING "mk712: unable to get IRQ\n"); + err = -EBUSY; + goto fail; + } + + input_register_device(mk712_dev); return 0; + + fail: input_free_device(mk712_dev); + release_region(mk712_io, 8); + return err; } static void __exit mk712_exit(void) { - input_unregister_device(&mk712_dev); - free_irq(mk712_irq, &mk712_dev); + input_unregister_device(mk712_dev); + free_irq(mk712_irq, mk712_dev); release_region(mk712_io, 8); } diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c index aa8ee7842179..1d0d37eeef6e 100644 --- a/drivers/input/touchscreen/mtouch.c +++ b/drivers/input/touchscreen/mtouch.c @@ -51,14 +51,12 @@ MODULE_LICENSE("GPL"); #define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3]) #define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0]) -static char *mtouch_name = "MicroTouch Serial TouchScreen"; - /* * Per-touchscreen data. */ struct mtouch { - struct input_dev dev; + struct input_dev *dev; struct serio *serio; int idx; unsigned char data[MTOUCH_MAX_LENGTH]; @@ -67,7 +65,7 @@ struct mtouch { static void mtouch_process_format_tablet(struct mtouch *mtouch, struct pt_regs *regs) { - struct input_dev *dev = &mtouch->dev; + struct input_dev *dev = mtouch->dev; if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) { input_regs(dev, regs); @@ -116,9 +114,11 @@ static void mtouch_disconnect(struct serio *serio) { struct mtouch* mtouch = serio_get_drvdata(serio); - input_unregister_device(&mtouch->dev); + input_get_device(mtouch->dev); + input_unregister_device(mtouch->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_put_device(mtouch->dev); kfree(mtouch); } @@ -131,46 +131,46 @@ static void mtouch_disconnect(struct serio *serio) static int mtouch_connect(struct serio *serio, struct serio_driver *drv) { struct mtouch *mtouch; + struct input_dev *input_dev; int err; - if (!(mtouch = kmalloc(sizeof(*mtouch), GFP_KERNEL))) - return -ENOMEM; - - memset(mtouch, 0, sizeof(*mtouch)); - - init_input_dev(&mtouch->dev); - mtouch->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - mtouch->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); - - input_set_abs_params(&mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); - input_set_abs_params(&mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); + mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mtouch || !input_dev) { + err = -ENOMEM; + goto fail; + } mtouch->serio = serio; - + mtouch->dev = input_dev; sprintf(mtouch->phys, "%s/input0", serio->phys); - mtouch->dev.private = mtouch; - mtouch->dev.name = mtouch_name; - mtouch->dev.phys = mtouch->phys; - mtouch->dev.id.bustype = BUS_RS232; - mtouch->dev.id.vendor = SERIO_MICROTOUCH; - mtouch->dev.id.product = 0; - mtouch->dev.id.version = 0x0100; + input_dev->private = mtouch; + input_dev->name = "MicroTouch Serial TouchScreen"; + input_dev->phys = mtouch->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_MICROTOUCH; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); + input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); serio_set_drvdata(serio, mtouch); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(mtouch); - return err; - } - - input_register_device(&mtouch->dev); + if (err) + goto fail; - printk(KERN_INFO "input: %s on %s\n", mtouch->dev.name, serio->phys); + input_register_device(mtouch->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(mtouch); + return err; } /* -- GitLab From b416f2e452b6c0f5075145bb7301f7f3d44d8ed5 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:50 -0500 Subject: [PATCH 0573/1519] [PATCH] Input: convert sonypi to dynamic input_dev allocation Input: convert sonypi to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/char/sonypi.c | 92 +++++++++++++++++++++++++------------------ 1 file changed, 53 insertions(+), 39 deletions(-) diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 36ae9ad2598c..a4873684f22c 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -424,10 +424,6 @@ static struct sonypi_eventtypes { #define SONYPI_BUF_SIZE 128 -/* The name of the devices for the input device drivers */ -#define SONYPI_JOG_INPUTNAME "Sony Vaio Jogdial" -#define SONYPI_KEY_INPUTNAME "Sony Vaio Keys" - /* Correspondance table between sonypi events and input layer events */ static struct { int sonypiev; @@ -490,8 +486,8 @@ static struct sonypi_device { struct fasync_struct *fifo_async; int open_count; int model; - struct input_dev input_jog_dev; - struct input_dev input_key_dev; + struct input_dev *input_jog_dev; + struct input_dev *input_key_dev; struct work_struct input_work; struct kfifo *input_fifo; spinlock_t input_fifo_lock; @@ -779,8 +775,8 @@ static void input_keyrelease(void *data) static void sonypi_report_input_event(u8 event) { - struct input_dev *jog_dev = &sonypi_device.input_jog_dev; - struct input_dev *key_dev = &sonypi_device.input_key_dev; + struct input_dev *jog_dev = sonypi_device.input_jog_dev; + struct input_dev *key_dev = sonypi_device.input_key_dev; struct sonypi_keypress kp = { NULL }; int i; @@ -1203,6 +1199,47 @@ static struct device_driver sonypi_driver = { .shutdown = sonypi_shutdown, }; +static int __devinit sonypi_create_input_devices(void) +{ + struct input_dev *jog_dev; + struct input_dev *key_dev; + int i; + + sonypi_device.input_jog_dev = jog_dev = input_allocate_device(); + if (!jog_dev) + return -ENOMEM; + + jog_dev->name = "Sony Vaio Jogdial"; + jog_dev->id.bustype = BUS_ISA; + jog_dev->id.vendor = PCI_VENDOR_ID_SONY; + + jog_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + jog_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_MIDDLE); + jog_dev->relbit[0] = BIT(REL_WHEEL); + + sonypi_device.input_key_dev = key_dev = input_allocate_device(); + if (!key_dev) { + input_free_device(jog_dev); + sonypi_device.input_jog_dev = NULL; + return -ENOMEM; + } + + key_dev->name = "Sony Vaio Keys"; + key_dev->id.bustype = BUS_ISA; + key_dev->id.vendor = PCI_VENDOR_ID_SONY; + + /* Initialize the Input Drivers: special keys */ + key_dev->evbit[0] = BIT(EV_KEY); + for (i = 0; sonypi_inputkeys[i].sonypiev; i++) + if (sonypi_inputkeys[i].inputev) + set_bit(sonypi_inputkeys[i].inputev, key_dev->keybit); + + input_register_device(jog_dev); + input_register_device(key_dev); + + return 0; +} + static int __devinit sonypi_probe(void) { int i, ret; @@ -1298,34 +1335,10 @@ static int __devinit sonypi_probe(void) } if (useinput) { - /* Initialize the Input Drivers: jogdial */ - int i; - sonypi_device.input_jog_dev.evbit[0] = - BIT(EV_KEY) | BIT(EV_REL); - sonypi_device.input_jog_dev.keybit[LONG(BTN_MOUSE)] = - BIT(BTN_MIDDLE); - sonypi_device.input_jog_dev.relbit[0] = BIT(REL_WHEEL); - sonypi_device.input_jog_dev.name = SONYPI_JOG_INPUTNAME; - sonypi_device.input_jog_dev.id.bustype = BUS_ISA; - sonypi_device.input_jog_dev.id.vendor = PCI_VENDOR_ID_SONY; - - input_register_device(&sonypi_device.input_jog_dev); - printk(KERN_INFO "%s input method installed.\n", - sonypi_device.input_jog_dev.name); - - /* Initialize the Input Drivers: special keys */ - sonypi_device.input_key_dev.evbit[0] = BIT(EV_KEY); - for (i = 0; sonypi_inputkeys[i].sonypiev; i++) - if (sonypi_inputkeys[i].inputev) - set_bit(sonypi_inputkeys[i].inputev, - sonypi_device.input_key_dev.keybit); - sonypi_device.input_key_dev.name = SONYPI_KEY_INPUTNAME; - sonypi_device.input_key_dev.id.bustype = BUS_ISA; - sonypi_device.input_key_dev.id.vendor = PCI_VENDOR_ID_SONY; - input_register_device(&sonypi_device.input_key_dev); - printk(KERN_INFO "%s input method installed.\n", - sonypi_device.input_key_dev.name); + ret = sonypi_create_input_devices(); + if (ret) + goto out_inputdevices; spin_lock_init(&sonypi_device.input_fifo_lock); sonypi_device.input_fifo = @@ -1375,8 +1388,9 @@ static int __devinit sonypi_probe(void) out_platformdev: kfifo_free(sonypi_device.input_fifo); out_infifo: - input_unregister_device(&sonypi_device.input_key_dev); - input_unregister_device(&sonypi_device.input_jog_dev); + input_unregister_device(sonypi_device.input_key_dev); + input_unregister_device(sonypi_device.input_jog_dev); +out_inputdevices: free_irq(sonypi_device.irq, sonypi_irq); out_reqirq: release_region(sonypi_device.ioport1, sonypi_device.region_size); @@ -1402,8 +1416,8 @@ static void __devexit sonypi_remove(void) platform_device_unregister(sonypi_device.pdev); if (useinput) { - input_unregister_device(&sonypi_device.input_key_dev); - input_unregister_device(&sonypi_device.input_jog_dev); + input_unregister_device(sonypi_device.input_key_dev); + input_unregister_device(sonypi_device.input_jog_dev); kfifo_free(sonypi_device.input_fifo); } -- GitLab From 88789672424375882166df86adde9dd77ead630e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:43 -0500 Subject: [PATCH 0574/1519] [PATCH] Input: convert onetouch to dynamic input_dev allocation Input: convert onetouch to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/onetouch.c | 99 +++++++++++++++++----------------- 1 file changed, 50 insertions(+), 49 deletions(-) diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 2c9402dc702b..89401a59f952 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -5,7 +5,7 @@ * Copyright (c) 2005 Nick Sillik * * Initial work by: - * Copyright (c) 2003 Erik Thyren + * Copyright (c) 2003 Erik Thyren * * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann) * @@ -46,7 +46,7 @@ void onetouch_release_input(void *onetouch_); struct usb_onetouch { char name[128]; char phys[64]; - struct input_dev dev; /* input device interface */ + struct input_dev *dev; /* input device interface */ struct usb_device *udev; /* usb device */ struct urb *irq; /* urb for interrupt in report */ @@ -58,7 +58,7 @@ static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs) { struct usb_onetouch *onetouch = urb->context; signed char *data = onetouch->data; - struct input_dev *dev = &onetouch->dev; + struct input_dev *dev = onetouch->dev; int status; switch (urb->status) { @@ -74,11 +74,9 @@ static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs) } input_regs(dev, regs); - - input_report_key(&onetouch->dev, ONETOUCH_BUTTON, - data[0] & 0x02); - + input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02); input_sync(dev); + resubmit: status = usb_submit_urb (urb, SLAB_ATOMIC); if (status) @@ -113,8 +111,8 @@ int onetouch_connect_input(struct us_data *ss) struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_onetouch *onetouch; + struct input_dev *input_dev; int pipe, maxp; - char path[64]; interface = ss->pusb_intf->cur_altsetting; @@ -122,62 +120,62 @@ int onetouch_connect_input(struct us_data *ss) return -ENODEV; endpoint = &interface->endpoint[2].desc; - if(!(endpoint->bEndpointAddress & USB_DIR_IN)) + if (!(endpoint->bEndpointAddress & USB_DIR_IN)) return -ENODEV; - if((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) return -ENODEV; pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - if (!(onetouch = kcalloc(1, sizeof(struct usb_onetouch), GFP_KERNEL))) - return -ENOMEM; + onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!onetouch || !input_dev) + goto fail1; onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN, SLAB_ATOMIC, &onetouch->data_dma); - if (!onetouch->data){ - kfree(onetouch); - return -ENOMEM; - } + if (!onetouch->data) + goto fail1; onetouch->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!onetouch->irq){ - kfree(onetouch); - usb_buffer_free(udev, ONETOUCH_PKT_LEN, - onetouch->data, onetouch->data_dma); - return -ENODEV; - } - + if (!onetouch->irq) + goto fail2; onetouch->udev = udev; + onetouch->dev = input_dev; - set_bit(EV_KEY, onetouch->dev.evbit); - set_bit(ONETOUCH_BUTTON, onetouch->dev.keybit); - clear_bit(0, onetouch->dev.keybit); + if (udev->manufacturer) + strlcpy(onetouch->name, udev->manufacturer, + sizeof(onetouch->name)); + if (udev->product) { + if (udev->manufacturer) + strlcat(onetouch->name, " ", sizeof(onetouch->name)); + strlcat(onetouch->name, udev->product, sizeof(onetouch->name)); + } - onetouch->dev.private = onetouch; - onetouch->dev.open = usb_onetouch_open; - onetouch->dev.close = usb_onetouch_close; + if (!strlen(onetouch->name)) + snprintf(onetouch->name, sizeof(onetouch->name), + "Maxtor Onetouch %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); - usb_make_path(udev, path, sizeof(path)); - sprintf(onetouch->phys, "%s/input0", path); + usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys)); + strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys)); - onetouch->dev.name = onetouch->name; - onetouch->dev.phys = onetouch->phys; + input_dev->name = onetouch->name; + input_dev->phys = onetouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->cdev.dev = &udev->dev; - usb_to_input_id(udev, &onetouch->dev.id); + set_bit(EV_KEY, input_dev->evbit); + set_bit(ONETOUCH_BUTTON, input_dev->keybit); + clear_bit(0, input_dev->keybit); - onetouch->dev.dev = &udev->dev; - - if (udev->manufacturer) - strcat(onetouch->name, udev->manufacturer); - if (udev->product) - sprintf(onetouch->name, "%s %s", onetouch->name, - udev->product); - if (!strlen(onetouch->name)) - sprintf(onetouch->name, "Maxtor Onetouch %04x:%04x", - onetouch->dev.id.vendor, onetouch->dev.id.product); + input_dev->private = onetouch; + input_dev->open = usb_onetouch_open; + input_dev->close = usb_onetouch_close; usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, (maxp > 8 ? 8 : maxp), @@ -188,10 +186,15 @@ int onetouch_connect_input(struct us_data *ss) ss->extra_destructor = onetouch_release_input; ss->extra = onetouch; - input_register_device(&onetouch->dev); - printk(KERN_INFO "usb-input: %s on %s\n", onetouch->dev.name, path); + input_register_device(onetouch->dev); return 0; + + fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN, + onetouch->data, onetouch->data_dma); + fail1: kfree(onetouch); + input_free_device(input_dev); + return -ENOMEM; } void onetouch_release_input(void *onetouch_) @@ -200,11 +203,9 @@ void onetouch_release_input(void *onetouch_) if (onetouch) { usb_kill_urb(onetouch->irq); - input_unregister_device(&onetouch->dev); + input_unregister_device(onetouch->dev); usb_free_urb(onetouch->irq); usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN, onetouch->data, onetouch->data_dma); - printk(KERN_INFO "usb-input: deregistering %s\n", - onetouch->dev.name); } } -- GitLab From 76b7cddfd576331761e945a508254abad11039e9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:51 -0500 Subject: [PATCH 0575/1519] [PATCH] Input: convert driver/input/misc to dynamic input_dev allocation Input: convert driver/input/misc to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/misc/m68kspkr.c | 36 +++++++++++++------------- drivers/input/misc/pcspkr.c | 30 +++++++++++----------- drivers/input/misc/sparcspkr.c | 47 +++++++++++++++++----------------- 3 files changed, 56 insertions(+), 57 deletions(-) diff --git a/drivers/input/misc/m68kspkr.c b/drivers/input/misc/m68kspkr.c index 64abdd98d482..04489ad7702a 100644 --- a/drivers/input/misc/m68kspkr.c +++ b/drivers/input/misc/m68kspkr.c @@ -24,9 +24,7 @@ MODULE_AUTHOR("Richard Zidlicky "); MODULE_DESCRIPTION("m68k beeper driver"); MODULE_LICENSE("GPL"); -static char m68kspkr_name[] = "m68k beeper"; -static char m68kspkr_phys[] = "m68k/generic"; -static struct input_dev m68kspkr_dev; +static struct input_dev *m68kspkr_dev; static int m68kspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { @@ -51,32 +49,34 @@ static int m68kspkr_event(struct input_dev *dev, unsigned int type, unsigned int static int __init m68kspkr_init(void) { - if (!mach_beep){ - printk("%s: no lowlevel beep support\n", m68kspkr_name); - return -1; + if (!mach_beep) { + printk(KERN_INFO "m68kspkr: no lowlevel beep support\n"); + return -ENODEV; } - m68kspkr_dev.evbit[0] = BIT(EV_SND); - m68kspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); - m68kspkr_dev.event = m68kspkr_event; + m68kspkr_dev = input_allocate_device(); + if (!m68kspkr_dev) + return -ENOMEM; - m68kspkr_dev.name = m68kspkr_name; - m68kspkr_dev.phys = m68kspkr_phys; - m68kspkr_dev.id.bustype = BUS_HOST; - m68kspkr_dev.id.vendor = 0x001f; - m68kspkr_dev.id.product = 0x0001; - m68kspkr_dev.id.version = 0x0100; + m68kspkr_dev->name = "m68k beeper"; + m68kspkr_dev->phys = "m68k/generic"; + m68kspkr_dev->id.bustype = BUS_HOST; + m68kspkr_dev->id.vendor = 0x001f; + m68kspkr_dev->id.product = 0x0001; + m68kspkr_dev->id.version = 0x0100; - input_register_device(&m68kspkr_dev); + m68kspkr_dev->evbit[0] = BIT(EV_SND); + m68kspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); + m68kspkr_dev->event = m68kspkr_event; - printk(KERN_INFO "input: %s\n", m68kspkr_name); + input_register_device(m68kspkr_dev); return 0; } static void __exit m68kspkr_exit(void) { - input_unregister_device(&m68kspkr_dev); + input_unregister_device(m68kspkr_dev); } module_init(m68kspkr_init); diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index 3013194f462b..e34633c37fdd 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -23,9 +23,7 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("PC Speaker beeper driver"); MODULE_LICENSE("GPL"); -static char pcspkr_name[] = "PC Speaker"; -static char pcspkr_phys[] = "isa0061/input0"; -static struct input_dev pcspkr_dev; +static struct input_dev *pcspkr_dev; static DEFINE_SPINLOCK(i8253_beep_lock); @@ -68,27 +66,29 @@ static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int c static int __init pcspkr_init(void) { - pcspkr_dev.evbit[0] = BIT(EV_SND); - pcspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); - pcspkr_dev.event = pcspkr_event; + pcspkr_dev = input_allocate_device(); + if (!pcspkr_dev) + return -ENOMEM; - pcspkr_dev.name = pcspkr_name; - pcspkr_dev.phys = pcspkr_phys; - pcspkr_dev.id.bustype = BUS_ISA; - pcspkr_dev.id.vendor = 0x001f; - pcspkr_dev.id.product = 0x0001; - pcspkr_dev.id.version = 0x0100; + pcspkr_dev->name = "PC Speaker"; + pcspkr_dev->name = "isa0061/input0"; + pcspkr_dev->id.bustype = BUS_ISA; + pcspkr_dev->id.vendor = 0x001f; + pcspkr_dev->id.product = 0x0001; + pcspkr_dev->id.version = 0x0100; - input_register_device(&pcspkr_dev); + pcspkr_dev->evbit[0] = BIT(EV_SND); + pcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); + pcspkr_dev->event = pcspkr_event; - printk(KERN_INFO "input: %s\n", pcspkr_name); + input_register_device(pcspkr_dev); return 0; } static void __exit pcspkr_exit(void) { - input_unregister_device(&pcspkr_dev); + input_unregister_device(pcspkr_dev); /* turn off the speaker */ pcspkr_event(NULL, EV_SND, SND_BELL, 0); } diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c index cdc3fb3d5f46..5778220a18d2 100644 --- a/drivers/input/misc/sparcspkr.c +++ b/drivers/input/misc/sparcspkr.c @@ -17,28 +17,24 @@ #endif MODULE_AUTHOR("David S. Miller "); -MODULE_DESCRIPTION("PC Speaker beeper driver"); +MODULE_DESCRIPTION("Sparc Speaker beeper driver"); MODULE_LICENSE("GPL"); static unsigned long beep_iobase; - -static char *sparcspkr_isa_name = "Sparc ISA Speaker"; -static char *sparcspkr_ebus_name = "Sparc EBUS Speaker"; -static char *sparcspkr_phys = "sparc/input0"; -static struct input_dev sparcspkr_dev; +static struct input_dev *sparcspkr_dev; DEFINE_SPINLOCK(beep_lock); static void __init init_sparcspkr_struct(void) { - sparcspkr_dev.evbit[0] = BIT(EV_SND); - sparcspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); - - sparcspkr_dev.phys = sparcspkr_phys; - sparcspkr_dev.id.bustype = BUS_ISA; - sparcspkr_dev.id.vendor = 0x001f; - sparcspkr_dev.id.product = 0x0001; - sparcspkr_dev.id.version = 0x0100; + sparcspkr_dev->evbit[0] = BIT(EV_SND); + sparcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); + + sparcspkr_dev->phys = "sparc/input0"; + sparcspkr_dev->id.bustype = BUS_ISA; + sparcspkr_dev->id.vendor = 0x001f; + sparcspkr_dev->id.product = 0x0001; + sparcspkr_dev->id.version = 0x0100; } static int ebus_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) @@ -84,14 +80,15 @@ static int __init init_ebus_beep(struct linux_ebus_device *edev) { beep_iobase = edev->resource[0].start; - init_sparcspkr_struct(); + sparcspkr_dev = input_allocate_device(); + if (!sparcspkr_dev) + return -ENOMEM; - sparcspkr_dev.name = sparcspkr_ebus_name; - sparcspkr_dev.event = ebus_spkr_event; + sparcspkr_dev->name = "Sparc EBUS Speaker"; + sparcspkr_dev->event = ebus_spkr_event; - input_register_device(&sparcspkr_dev); + input_register_device(sparcspkr_dev); - printk(KERN_INFO "input: %s\n", sparcspkr_ebus_name); return 0; } @@ -137,15 +134,17 @@ static int __init init_isa_beep(struct sparc_isa_device *isa_dev) { beep_iobase = isa_dev->resource.start; + sparcspkr_dev = input_allocate_device(); + if (!sparcspkr_dev) + return -ENOMEM; + init_sparcspkr_struct(); - sparcspkr_dev.name = sparcspkr_isa_name; - sparcspkr_dev.event = isa_spkr_event; - sparcspkr_dev.id.bustype = BUS_ISA; + sparcspkr_dev->name = "Sparc ISA Speaker"; + sparcspkr_dev->event = isa_spkr_event; input_register_device(&sparcspkr_dev); - printk(KERN_INFO "input: %s\n", sparcspkr_isa_name); return 0; } #endif @@ -182,7 +181,7 @@ static int __init sparcspkr_init(void) static void __exit sparcspkr_exit(void) { - input_unregister_device(&sparcspkr_dev); + input_unregister_device(sparcspkr_dev); } module_init(sparcspkr_init); -- GitLab From b7df3910c1298fee8ed7b9dfd2da74b85df5539c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:53 -0500 Subject: [PATCH 0576/1519] [PATCH] drivers/media: convert to dynamic input_dev allocation Input: convert drivers/media to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/media/common/ir-common.c | 1 - drivers/media/dvb/cinergyT2/cinergyT2.c | 108 +++++++++++++------- drivers/media/dvb/dvb-usb/dvb-usb-remote.c | 50 +++++---- drivers/media/dvb/dvb-usb/dvb-usb.h | 3 +- drivers/media/dvb/ttpci/av7110_ir.c | 37 ++++--- drivers/media/dvb/ttpci/budget-ci.c | 24 +++-- drivers/media/dvb/ttusb-dec/ttusb_dec.c | 51 +++++---- drivers/media/video/bttvp.h | 2 +- drivers/media/video/cx88/cx88-input.c | 58 ++++++----- drivers/media/video/ir-kbd-gpio.c | 52 +++++----- drivers/media/video/ir-kbd-i2c.c | 33 +++--- drivers/media/video/saa7134/saa7134-input.c | 39 +++---- drivers/media/video/saa7134/saa7134.h | 2 +- 13 files changed, 268 insertions(+), 192 deletions(-) diff --git a/drivers/media/common/ir-common.c b/drivers/media/common/ir-common.c index a0e700d7a4a4..06f4d4686a6c 100644 --- a/drivers/media/common/ir-common.c +++ b/drivers/media/common/ir-common.c @@ -252,7 +252,6 @@ void ir_input_init(struct input_dev *dev, struct ir_input_state *ir, if (ir_codes) memcpy(ir->ir_codes, ir_codes, sizeof(ir->ir_codes)); - init_input_dev(dev); dev->keycode = ir->ir_codes; dev->keycodesize = sizeof(IR_KEYTAB_TYPE); dev->keycodemax = IR_KEYTAB_SIZE; diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index 6db0929ef53d..a1607e7d6d6b 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -137,7 +137,8 @@ struct cinergyt2 { struct urb *stream_urb [STREAM_URB_COUNT]; #ifdef ENABLE_RC - struct input_dev rc_input_dev; + struct input_dev *rc_input_dev; + char phys[64]; struct work_struct rc_query_work; int rc_input_event; u32 rc_last_code; @@ -683,6 +684,7 @@ static struct dvb_device cinergyt2_fe_template = { }; #ifdef ENABLE_RC + static void cinergyt2_query_rc (void *data) { struct cinergyt2 *cinergyt2 = data; @@ -703,7 +705,7 @@ static void cinergyt2_query_rc (void *data) /* stop key repeat */ if (cinergyt2->rc_input_event != KEY_MAX) { dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event); - input_report_key(&cinergyt2->rc_input_dev, + input_report_key(cinergyt2->rc_input_dev, cinergyt2->rc_input_event, 0); cinergyt2->rc_input_event = KEY_MAX; } @@ -722,7 +724,7 @@ static void cinergyt2_query_rc (void *data) /* keyrepeat bit -> just repeat last rc_input_event */ } else { cinergyt2->rc_input_event = KEY_MAX; - for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3) { + for (i = 0; i < ARRAY_SIZE(rc_keys); i += 3) { if (rc_keys[i + 0] == rc_events[n].type && rc_keys[i + 1] == le32_to_cpu(rc_events[n].value)) { cinergyt2->rc_input_event = rc_keys[i + 2]; @@ -736,11 +738,11 @@ static void cinergyt2_query_rc (void *data) cinergyt2->rc_last_code != ~0) { /* emit a key-up so the double event is recognized */ dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); - input_report_key(&cinergyt2->rc_input_dev, + input_report_key(cinergyt2->rc_input_dev, cinergyt2->rc_input_event, 0); } dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event); - input_report_key(&cinergyt2->rc_input_dev, + input_report_key(cinergyt2->rc_input_dev, cinergyt2->rc_input_event, 1); cinergyt2->rc_last_code = rc_events[n].value; } @@ -752,7 +754,59 @@ static void cinergyt2_query_rc (void *data) up(&cinergyt2->sem); } -#endif + +static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) +{ + struct input_dev *input_dev; + int i; + + cinergyt2->rc_input_dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); + strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); + cinergyt2->rc_input_event = KEY_MAX; + cinergyt2->rc_last_code = ~0; + INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2); + + input_dev->name = DRIVER_NAME " remote control"; + input_dev->phys = cinergyt2->phys; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + for (i = 0; ARRAY_SIZE(rc_keys); i += 3) + set_bit(rc_keys[i + 2], input_dev->keybit); + input_dev->keycodesize = 0; + input_dev->keycodemax = 0; + + input_register_device(cinergyt2->rc_input_dev); + schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); +} + +static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) +{ + cancel_delayed_work(&cinergyt2->rc_query_work); + flush_scheduled_work(); + input_unregister_device(cinergyt2->rc_input_dev); +} + +static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) +{ + cancel_delayed_work(&cinergyt2->rc_query_work); +} + +static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) +{ + schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); +} + +#else + +static inline int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) { return 0; } +static inline void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) { } +static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) { } +static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) { } + +#endif /* ENABLE_RC */ static void cinergyt2_query (void *data) { @@ -789,9 +843,6 @@ static int cinergyt2_probe (struct usb_interface *intf, { struct cinergyt2 *cinergyt2; int err; -#ifdef ENABLE_RC - int i; -#endif if (!(cinergyt2 = kmalloc (sizeof(struct cinergyt2), GFP_KERNEL))) { dprintk(1, "out of memory?!?\n"); @@ -846,30 +897,17 @@ static int cinergyt2_probe (struct usb_interface *intf, &cinergyt2_fe_template, cinergyt2, DVB_DEVICE_FRONTEND); -#ifdef ENABLE_RC - cinergyt2->rc_input_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - cinergyt2->rc_input_dev.keycodesize = 0; - cinergyt2->rc_input_dev.keycodemax = 0; - cinergyt2->rc_input_dev.name = DRIVER_NAME " remote control"; - - for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3) - set_bit(rc_keys[i + 2], cinergyt2->rc_input_dev.keybit); - - input_register_device(&cinergyt2->rc_input_dev); - - cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = ~0; + err = cinergyt2_register_rc(cinergyt2); + if (err) + goto bailout; - INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2); - schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); -#endif return 0; bailout: dvb_dmxdev_release(&cinergyt2->dmxdev); dvb_dmx_release(&cinergyt2->demux); - dvb_unregister_adapter (&cinergyt2->adapter); - cinergyt2_free_stream_urbs (cinergyt2); + dvb_unregister_adapter(&cinergyt2->adapter); + cinergyt2_free_stream_urbs(cinergyt2); kfree(cinergyt2); return -ENOMEM; } @@ -881,11 +919,7 @@ static void cinergyt2_disconnect (struct usb_interface *intf) if (down_interruptible(&cinergyt2->sem)) return; -#ifdef ENABLE_RC - cancel_delayed_work(&cinergyt2->rc_query_work); - flush_scheduled_work(); - input_unregister_device(&cinergyt2->rc_input_dev); -#endif + cinergyt2_unregister_rc(cinergyt2); cinergyt2->demux.dmx.close(&cinergyt2->demux.dmx); dvb_net_release(&cinergyt2->dvbnet); @@ -908,9 +942,8 @@ static int cinergyt2_suspend (struct usb_interface *intf, pm_message_t state) if (state.event > PM_EVENT_ON) { struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf); -#ifdef ENABLE_RC - cancel_delayed_work(&cinergyt2->rc_query_work); -#endif + + cinergyt2_suspend_rc(cinergyt2); cancel_delayed_work(&cinergyt2->query_work); if (cinergyt2->streaming) cinergyt2_stop_stream_xfer(cinergyt2); @@ -938,9 +971,8 @@ static int cinergyt2_resume (struct usb_interface *intf) schedule_delayed_work(&cinergyt2->query_work, HZ/2); } -#ifdef ENABLE_RC - schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); -#endif + cinergyt2_resume_rc(cinergyt2); + up(&cinergyt2->sem); return 0; } diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c index fc7800f1743e..e5c6d9835e06 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -39,9 +39,9 @@ static void dvb_usb_read_remote_control(void *data) d->last_event = event; case REMOTE_KEY_REPEAT: deb_rc("key repeated\n"); - input_event(&d->rc_input_dev, EV_KEY, d->last_event, 1); - input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); - input_sync(&d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, event, 1); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(d->rc_input_dev); break; default: break; @@ -53,8 +53,8 @@ static void dvb_usb_read_remote_control(void *data) deb_rc("NO KEY PRESSED\n"); if (d->last_state != REMOTE_NO_KEY_PRESSED) { deb_rc("releasing event %d\n",d->last_event); - input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); - input_sync(&d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(d->rc_input_dev); } d->last_state = REMOTE_NO_KEY_PRESSED; d->last_event = 0; @@ -63,8 +63,8 @@ static void dvb_usb_read_remote_control(void *data) deb_rc("KEY PRESSED\n"); deb_rc("pressing event %d\n",event); - input_event(&d->rc_input_dev, EV_KEY, event, 1); - input_sync(&d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, event, 1); + input_sync(d->rc_input_dev); d->last_event = event; d->last_state = REMOTE_KEY_PRESSED; @@ -73,8 +73,8 @@ static void dvb_usb_read_remote_control(void *data) deb_rc("KEY_REPEAT\n"); if (d->last_state != REMOTE_NO_KEY_PRESSED) { deb_rc("repeating event %d\n",d->last_event); - input_event(&d->rc_input_dev, EV_KEY, d->last_event, 2); - input_sync(&d->rc_input_dev); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 2); + input_sync(d->rc_input_dev); d->last_state = REMOTE_KEY_REPEAT; } default: @@ -89,24 +89,30 @@ static void dvb_usb_read_remote_control(void *data) int dvb_usb_remote_init(struct dvb_usb_device *d) { int i; + if (d->props.rc_key_map == NULL || d->props.rc_query == NULL || dvb_usb_disable_rc_polling) return 0; - /* Initialise the remote-control structures.*/ - init_input_dev(&d->rc_input_dev); + usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); + strlcpy(d->rc_phys, "/ir0", sizeof(d->rc_phys)); + + d->rc_input_dev = input_allocate_device(); + if (!d->rc_input_dev) + return -ENOMEM; - d->rc_input_dev.evbit[0] = BIT(EV_KEY); - d->rc_input_dev.keycodesize = sizeof(unsigned char); - d->rc_input_dev.keycodemax = KEY_MAX; - d->rc_input_dev.name = "IR-receiver inside an USB DVB receiver"; + d->rc_input_dev->evbit[0] = BIT(EV_KEY); + d->rc_input_dev->keycodesize = sizeof(unsigned char); + d->rc_input_dev->keycodemax = KEY_MAX; + d->rc_input_dev->name = "IR-receiver inside an USB DVB receiver"; + d->rc_input_dev->phys = d->rc_phys; /* set the bits for the keys */ - deb_rc("key map size: %d\n",d->props.rc_key_map_size); + deb_rc("key map size: %d\n", d->props.rc_key_map_size); for (i = 0; i < d->props.rc_key_map_size; i++) { deb_rc("setting bit for event %d item %d\n",d->props.rc_key_map[i].event, i); - set_bit(d->props.rc_key_map[i].event, d->rc_input_dev.keybit); + set_bit(d->props.rc_key_map[i].event, d->rc_input_dev->keybit); } /* Start the remote-control polling. */ @@ -114,14 +120,14 @@ int dvb_usb_remote_init(struct dvb_usb_device *d) d->props.rc_interval = 100; /* default */ /* setting these two values to non-zero, we have to manage key repeats */ - d->rc_input_dev.rep[REP_PERIOD] = d->props.rc_interval; - d->rc_input_dev.rep[REP_DELAY] = d->props.rc_interval + 150; + d->rc_input_dev->rep[REP_PERIOD] = d->props.rc_interval; + d->rc_input_dev->rep[REP_DELAY] = d->props.rc_interval + 150; - input_register_device(&d->rc_input_dev); + input_register_device(d->rc_input_dev); INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d); - info("schedule remote query interval to %d msecs.",d->props.rc_interval); + info("schedule remote query interval to %d msecs.", d->props.rc_interval); schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); d->state |= DVB_USB_STATE_REMOTE; @@ -134,7 +140,7 @@ int dvb_usb_remote_exit(struct dvb_usb_device *d) if (d->state & DVB_USB_STATE_REMOTE) { cancel_delayed_work(&d->rc_query_work); flush_scheduled_work(); - input_unregister_device(&d->rc_input_dev); + input_unregister_device(d->rc_input_dev); } d->state &= ~DVB_USB_STATE_REMOTE; return 0; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h index 0e4f1035b0dd..b4a1a98006c7 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -300,7 +300,8 @@ struct dvb_usb_device { int (*fe_init) (struct dvb_frontend *); /* remote control */ - struct input_dev rc_input_dev; + struct input_dev *rc_input_dev; + char rc_phys[64]; struct work_struct rc_query_work; u32 last_event; int last_state; diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c index 357a3728ec68..f5e59fc924af 100644 --- a/drivers/media/dvb/ttpci/av7110_ir.c +++ b/drivers/media/dvb/ttpci/av7110_ir.c @@ -15,7 +15,7 @@ static int av_cnt; static struct av7110 *av_list[4]; -static struct input_dev input_dev; +static struct input_dev *input_dev; static u16 key_map [256] = { KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, @@ -43,10 +43,10 @@ static u16 key_map [256] = { static void av7110_emit_keyup(unsigned long data) { - if (!data || !test_bit(data, input_dev.key)) + if (!data || !test_bit(data, input_dev->key)) return; - input_event(&input_dev, EV_KEY, data, !!0); + input_event(input_dev, EV_KEY, data, !!0); } @@ -112,13 +112,13 @@ static void av7110_emit_key(unsigned long parm) if (timer_pending(&keyup_timer)) { del_timer(&keyup_timer); if (keyup_timer.data != keycode || new_toggle != old_toggle) { - input_event(&input_dev, EV_KEY, keyup_timer.data, !!0); - input_event(&input_dev, EV_KEY, keycode, !0); + input_event(input_dev, EV_KEY, keyup_timer.data, !!0); + input_event(input_dev, EV_KEY, keycode, !0); } else - input_event(&input_dev, EV_KEY, keycode, 2); + input_event(input_dev, EV_KEY, keycode, 2); } else - input_event(&input_dev, EV_KEY, keycode, !0); + input_event(input_dev, EV_KEY, keycode, !0); keyup_timer.expires = jiffies + UP_TIMEOUT; keyup_timer.data = keycode; @@ -132,13 +132,13 @@ static void input_register_keys(void) { int i; - memset(input_dev.keybit, 0, sizeof(input_dev.keybit)); + memset(input_dev->keybit, 0, sizeof(input_dev->keybit)); - for (i = 0; i < sizeof(key_map) / sizeof(key_map[0]); i++) { + for (i = 0; i < ARRAY_SIZE(key_map); i++) { if (key_map[i] > KEY_MAX) key_map[i] = 0; else if (key_map[i] > KEY_RESERVED) - set_bit(key_map[i], input_dev.keybit); + set_bit(key_map[i], input_dev->keybit); } } @@ -216,12 +216,17 @@ int __init av7110_ir_init(struct av7110 *av7110) init_timer(&keyup_timer); keyup_timer.data = 0; - input_dev.name = "DVB on-card IR receiver"; - set_bit(EV_KEY, input_dev.evbit); - set_bit(EV_REP, input_dev.evbit); + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->name = "DVB on-card IR receiver"; + + set_bit(EV_KEY, input_dev->evbit); + set_bit(EV_REP, input_dev->evbit); input_register_keys(); - input_register_device(&input_dev); - input_dev.timer.function = input_repeat_key; + input_register_device(input_dev); + input_dev->timer.function = input_repeat_key; e = create_proc_entry("av7110_ir", S_IFREG | S_IRUGO | S_IWUSR, NULL); if (e) { @@ -256,7 +261,7 @@ void __exit av7110_ir_exit(struct av7110 *av7110) if (av_cnt == 1) { del_timer_sync(&keyup_timer); remove_proc_entry("av7110_ir", NULL); - input_unregister_device(&input_dev); + input_unregister_device(input_dev); } av_cnt--; diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 2980db3ef22f..51c30ba68140 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -64,7 +64,7 @@ struct budget_ci { struct budget budget; - struct input_dev input_dev; + struct input_dev *input_dev; struct tasklet_struct msp430_irq_tasklet; struct tasklet_struct ciintf_irq_tasklet; int slot_status; @@ -145,7 +145,7 @@ static void msp430_ir_debounce(unsigned long data) static void msp430_ir_interrupt(unsigned long data) { struct budget_ci *budget_ci = (struct budget_ci *) data; - struct input_dev *dev = &budget_ci->input_dev; + struct input_dev *dev = budget_ci->input_dev; unsigned int code = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; @@ -181,25 +181,27 @@ static void msp430_ir_interrupt(unsigned long data) static int msp430_ir_init(struct budget_ci *budget_ci) { struct saa7146_dev *saa = budget_ci->budget.dev; + struct input_dev *input_dev; int i; - memset(&budget_ci->input_dev, 0, sizeof(struct input_dev)); + budget_ci->input_dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; sprintf(budget_ci->ir_dev_name, "Budget-CI dvb ir receiver %s", saa->name); - budget_ci->input_dev.name = budget_ci->ir_dev_name; - set_bit(EV_KEY, budget_ci->input_dev.evbit); + input_dev->name = budget_ci->ir_dev_name; - for (i = 0; i < sizeof(key_map) / sizeof(*key_map); i++) + set_bit(EV_KEY, input_dev->evbit); + for (i = 0; i < ARRAY_SIZE(key_map); i++) if (key_map[i]) - set_bit(key_map[i], budget_ci->input_dev.keybit); + set_bit(key_map[i], input_dev->keybit); - input_register_device(&budget_ci->input_dev); + input_register_device(budget_ci->input_dev); - budget_ci->input_dev.timer.function = msp430_ir_debounce; + input_dev->timer.function = msp430_ir_debounce; saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_06); - saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); return 0; @@ -208,7 +210,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci) static void msp430_ir_deinit(struct budget_ci *budget_ci) { struct saa7146_dev *saa = budget_ci->budget.dev; - struct input_dev *dev = &budget_ci->input_dev; + struct input_dev *dev = budget_ci->input_dev; saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_06); saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 3d08fc83a754..832d179f26fa 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -152,7 +152,8 @@ struct ttusb_dec { struct list_head filter_info_list; spinlock_t filter_info_list_lock; - struct input_dev rc_input_dev; + struct input_dev *rc_input_dev; + char rc_phys[64]; int active; /* Loaded successfully */ }; @@ -235,9 +236,9 @@ static void ttusb_dec_handle_irq( struct urb *urb, struct pt_regs *regs) * this should/could be added later ... * for now lets report each signal as a key down and up*/ dprintk("%s:rc signal:%d\n", __FUNCTION__, buffer[4]); - input_report_key(&dec->rc_input_dev,rc_keys[buffer[4]-1],1); - input_report_key(&dec->rc_input_dev,rc_keys[buffer[4]-1],0); - input_sync(&dec->rc_input_dev); + input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1); + input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0); + input_sync(dec->rc_input_dev); } exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -1181,29 +1182,38 @@ static void ttusb_dec_init_tasklet(struct ttusb_dec *dec) (unsigned long)dec); } -static void ttusb_init_rc( struct ttusb_dec *dec) +static int ttusb_init_rc(struct ttusb_dec *dec) { + struct input_dev *input_dev; u8 b[] = { 0x00, 0x01 }; int i; - init_input_dev(&dec->rc_input_dev); + usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys)); + strlcpy(dec->rc_phys, "/input0", sizeof(dec->rc_phys)); - dec->rc_input_dev.name = "ttusb_dec remote control"; - dec->rc_input_dev.evbit[0] = BIT(EV_KEY); - dec->rc_input_dev.keycodesize = sizeof(u16); - dec->rc_input_dev.keycodemax = 0x1a; - dec->rc_input_dev.keycode = rc_keys; + dec->rc_input_dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->name = "ttusb_dec remote control"; + input_dev->phys = dec->rc_phys; + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->keycodesize = sizeof(u16); + input_dev->keycodemax = 0x1a; + input_dev->keycode = rc_keys; - for (i = 0; i < sizeof(rc_keys)/sizeof(rc_keys[0]); i++) - set_bit(rc_keys[i], dec->rc_input_dev.keybit); + for (i = 0; i < ARRAY_SIZE(rc_keys); i++) + set_bit(rc_keys[i], input_dev->keybit); - input_register_device(&dec->rc_input_dev); + input_register_device(input_dev); - if(usb_submit_urb(dec->irq_urb,GFP_KERNEL)) { + if (usb_submit_urb(dec->irq_urb, GFP_KERNEL)) printk("%s: usb_submit_urb failed\n",__FUNCTION__); - } + /* enable irq pipe */ ttusb_dec_send_command(dec,0xb0,sizeof(b),b,NULL,NULL); + + return 0; } static void ttusb_dec_init_v_pes(struct ttusb_dec *dec) @@ -1513,7 +1523,7 @@ static void ttusb_dec_exit_rc(struct ttusb_dec *dec) * As the irq is submitted after the interface is changed, * this is the best method i figured out. * Any others?*/ - if(dec->interface == TTUSB_DEC_INTERFACE_IN) + if (dec->interface == TTUSB_DEC_INTERFACE_IN) usb_kill_urb(dec->irq_urb); usb_free_urb(dec->irq_urb); @@ -1521,7 +1531,10 @@ static void ttusb_dec_exit_rc(struct ttusb_dec *dec) usb_buffer_free(dec->udev,IRQ_PACKET_SIZE, dec->irq_buffer, dec->irq_dma_handle); - input_unregister_device(&dec->rc_input_dev); + if (dec->rc_input_dev) { + input_unregister_device(dec->rc_input_dev); + dec->rc_input_dev = NULL; + } } @@ -1659,7 +1672,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, ttusb_dec_set_interface(dec, TTUSB_DEC_INTERFACE_IN); - if(enable_rc) + if (enable_rc) ttusb_init_rc(dec); return 0; diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h index 7a312f79340a..e0e7c7a84bc5 100644 --- a/drivers/media/video/bttvp.h +++ b/drivers/media/video/bttvp.h @@ -240,7 +240,7 @@ struct bttv_pll_info { /* for gpio-connected remote control */ struct bttv_input { - struct input_dev dev; + struct input_dev *dev; struct ir_input_state ir; char name[32]; char phys[32]; diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index d81b21d6e05d..c27fe4c36f69 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -260,7 +260,7 @@ static IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = { struct cx88_IR { struct cx88_core *core; - struct input_dev input; + struct input_dev *input; struct ir_input_state ir; char name[32]; char phys[32]; @@ -315,23 +315,23 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) if (ir->mask_keydown) { /* bit set on keydown */ if (gpio & ir->mask_keydown) { - ir_input_keydown(&ir->input, &ir->ir, data, data); + ir_input_keydown(ir->input, &ir->ir, data, data); } else { - ir_input_nokey(&ir->input, &ir->ir); + ir_input_nokey(ir->input, &ir->ir); } } else if (ir->mask_keyup) { /* bit cleared on keydown */ if (0 == (gpio & ir->mask_keyup)) { - ir_input_keydown(&ir->input, &ir->ir, data, data); + ir_input_keydown(ir->input, &ir->ir, data, data); } else { - ir_input_nokey(&ir->input, &ir->ir); + ir_input_nokey(ir->input, &ir->ir); } } else { /* can't distinguish keydown/up :-/ */ - ir_input_keydown(&ir->input, &ir->ir, data, data); - ir_input_nokey(&ir->input, &ir->ir); + ir_input_keydown(ir->input, &ir->ir, data, data); + ir_input_nokey(ir->input, &ir->ir); } } @@ -357,13 +357,19 @@ static void cx88_ir_work(void *data) int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) { struct cx88_IR *ir; + struct input_dev *input_dev; IR_KEYTAB_TYPE *ir_codes = NULL; int ir_type = IR_TYPE_OTHER; - ir = kmalloc(sizeof(*ir), GFP_KERNEL); - if (NULL == ir) + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ir || !input_dev) { + kfree(ir); + input_free_device(input_dev); return -ENOMEM; - memset(ir, 0, sizeof(*ir)); + } + + ir->input = input_dev; /* detect & configure */ switch (core->board) { @@ -425,6 +431,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) if (NULL == ir_codes) { kfree(ir); + input_free_device(input_dev); return -ENODEV; } @@ -433,19 +440,19 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) cx88_boards[core->board].name); snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci)); - ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes); - ir->input.name = ir->name; - ir->input.phys = ir->phys; - ir->input.id.bustype = BUS_PCI; - ir->input.id.version = 1; + ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + input_dev->name = ir->name; + input_dev->phys = ir->phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 1; if (pci->subsystem_vendor) { - ir->input.id.vendor = pci->subsystem_vendor; - ir->input.id.product = pci->subsystem_device; + input_dev->id.vendor = pci->subsystem_vendor; + input_dev->id.product = pci->subsystem_device; } else { - ir->input.id.vendor = pci->vendor; - ir->input.id.product = pci->device; + input_dev->id.vendor = pci->vendor; + input_dev->id.product = pci->device; } - ir->input.dev = &pci->dev; + input_dev->cdev.dev = &pci->dev; /* record handles to ourself */ ir->core = core; @@ -465,8 +472,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) } /* all done */ - input_register_device(&ir->input); - printk("%s: registered IR remote control\n", core->name); + input_register_device(ir->input); return 0; } @@ -484,7 +490,7 @@ int cx88_ir_fini(struct cx88_core *core) flush_scheduled_work(); } - input_unregister_device(&ir->input); + input_unregister_device(ir->input); kfree(ir); /* done */ @@ -515,7 +521,7 @@ void cx88_ir_irq(struct cx88_core *core) if (!ir->scount) { /* nothing to sample */ if (ir->ir.keypressed && time_after(jiffies, ir->release)) - ir_input_nokey(&ir->input, &ir->ir); + ir_input_nokey(ir->input, &ir->ir); return; } @@ -557,7 +563,7 @@ void cx88_ir_irq(struct cx88_core *core) ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f); - ir_input_keydown(&ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff); + ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff); ir->release = jiffies + msecs_to_jiffies(120); break; case CX88_BOARD_HAUPPAUGE: @@ -566,7 +572,7 @@ void cx88_ir_irq(struct cx88_core *core) ir_dprintk("biphase decoded: %x\n", ircode); if ((ircode & 0xfffff000) != 0x3000) break; - ir_input_keydown(&ir->input, &ir->ir, ircode & 0x3f, ircode); + ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode); ir->release = jiffies + msecs_to_jiffies(120); break; } diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/ir-kbd-gpio.c index cf292da8fdd5..234151e48edc 100644 --- a/drivers/media/video/ir-kbd-gpio.c +++ b/drivers/media/video/ir-kbd-gpio.c @@ -158,7 +158,7 @@ static IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = { struct IR { struct bttv_sub_device *sub; - struct input_dev input; + struct input_dev *input; struct ir_input_state ir; char name[32]; char phys[32]; @@ -217,23 +217,23 @@ static void ir_handle_key(struct IR *ir) if (ir->mask_keydown) { /* bit set on keydown */ if (gpio & ir->mask_keydown) { - ir_input_keydown(&ir->input,&ir->ir,data,data); + ir_input_keydown(ir->input, &ir->ir, data, data); } else { - ir_input_nokey(&ir->input,&ir->ir); + ir_input_nokey(ir->input, &ir->ir); } } else if (ir->mask_keyup) { /* bit cleared on keydown */ if (0 == (gpio & ir->mask_keyup)) { - ir_input_keydown(&ir->input,&ir->ir,data,data); + ir_input_keydown(ir->input, &ir->ir, data, data); } else { - ir_input_nokey(&ir->input,&ir->ir); + ir_input_nokey(ir->input, &ir->ir); } } else { /* can't disturgissh keydown/up :-/ */ - ir_input_keydown(&ir->input,&ir->ir,data,data); - ir_input_nokey(&ir->input,&ir->ir); + ir_input_keydown(ir->input, &ir->ir, data, data); + ir_input_nokey(ir->input, &ir->ir); } } @@ -268,13 +268,17 @@ static int ir_probe(struct device *dev) { struct bttv_sub_device *sub = to_bttv_sub_dev(dev); struct IR *ir; + struct input_dev *input_dev; IR_KEYTAB_TYPE *ir_codes = NULL; int ir_type = IR_TYPE_OTHER; - ir = kmalloc(sizeof(*ir),GFP_KERNEL); - if (NULL == ir) + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ir || !input_dev) { + kfree(ir); + input_free_device(input_dev); return -ENOMEM; - memset(ir,0,sizeof(*ir)); + } /* detect & configure */ switch (sub->core->type) { @@ -328,6 +332,7 @@ static int ir_probe(struct device *dev) } if (NULL == ir_codes) { kfree(ir); + input_free_device(input_dev); return -ENODEV; } @@ -341,19 +346,19 @@ static int ir_probe(struct device *dev) snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(sub->core->pci)); - ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes); - ir->input.name = ir->name; - ir->input.phys = ir->phys; - ir->input.id.bustype = BUS_PCI; - ir->input.id.version = 1; + ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + input_dev->name = ir->name; + input_dev->phys = ir->phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 1; if (sub->core->pci->subsystem_vendor) { - ir->input.id.vendor = sub->core->pci->subsystem_vendor; - ir->input.id.product = sub->core->pci->subsystem_device; + input_dev->id.vendor = sub->core->pci->subsystem_vendor; + input_dev->id.product = sub->core->pci->subsystem_device; } else { - ir->input.id.vendor = sub->core->pci->vendor; - ir->input.id.product = sub->core->pci->device; + input_dev->id.vendor = sub->core->pci->vendor; + input_dev->id.product = sub->core->pci->device; } - ir->input.dev = &sub->core->pci->dev; + input_dev->cdev.dev = &sub->core->pci->dev; if (ir->polling) { INIT_WORK(&ir->work, ir_work, ir); @@ -364,9 +369,8 @@ static int ir_probe(struct device *dev) } /* all done */ - dev_set_drvdata(dev,ir); - input_register_device(&ir->input); - printk(DEVNAME ": %s detected at %s\n",ir->input.name,ir->input.phys); + dev_set_drvdata(dev, ir); + input_register_device(ir->input); return 0; } @@ -380,7 +384,7 @@ static int ir_remove(struct device *dev) flush_scheduled_work(); } - input_unregister_device(&ir->input); + input_unregister_device(ir->input); kfree(ir); return 0; } diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 67105b9804a2..9703d3d351f9 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -121,10 +121,9 @@ static IR_KEYTAB_TYPE ir_codes_purpletv[IR_KEYTAB_SIZE] = { }; -struct IR; struct IR { struct i2c_client c; - struct input_dev input; + struct input_dev *input; struct ir_input_state ir; struct work_struct work; @@ -271,9 +270,9 @@ static void ir_key_poll(struct IR *ir) } if (0 == rc) { - ir_input_nokey(&ir->input,&ir->ir); + ir_input_nokey(ir->input, &ir->ir); } else { - ir_input_keydown(&ir->input,&ir->ir, ir_key, ir_raw); + ir_input_keydown(ir->input, &ir->ir, ir_key, ir_raw); } } @@ -318,11 +317,18 @@ static int ir_attach(struct i2c_adapter *adap, int addr, char *name; int ir_type; struct IR *ir; + struct input_dev *input_dev; - if (NULL == (ir = kmalloc(sizeof(struct IR),GFP_KERNEL))) + ir = kzalloc(sizeof(struct IR), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ir || !input_dev) { + kfree(ir); + input_free_device(input_dev); return -ENOMEM; - memset(ir,0,sizeof(*ir)); + } + ir->c = client_template; + ir->input = input_dev; i2c_set_clientdata(&ir->c, ir); ir->c.adapter = adap; @@ -375,13 +381,12 @@ static int ir_attach(struct i2c_adapter *adap, int addr, ir->c.dev.bus_id); /* init + register input device */ - ir_input_init(&ir->input,&ir->ir,ir_type,ir_codes); - ir->input.id.bustype = BUS_I2C; - ir->input.name = ir->c.name; - ir->input.phys = ir->phys; - input_register_device(&ir->input); - printk(DEVNAME ": %s detected at %s [%s]\n", - ir->input.name,ir->input.phys,adap->name); + ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + input_dev->id.bustype = BUS_I2C; + input_dev->name = ir->c.name; + input_dev->phys = ir->phys; + + input_register_device(ir->input); /* start polling via eventd */ INIT_WORK(&ir->work, ir_work, ir); @@ -402,7 +407,7 @@ static int ir_detach(struct i2c_client *client) flush_scheduled_work(); /* unregister devices */ - input_unregister_device(&ir->input); + input_unregister_device(ir->input); i2c_detach_client(&ir->c); /* free memory */ diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 1f456c4d76f2..242cb235cf92 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -425,9 +425,9 @@ static int build_key(struct saa7134_dev *dev) if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { - ir_input_keydown(&ir->dev,&ir->ir,data,data); + ir_input_keydown(ir->dev, &ir->ir, data, data); } else { - ir_input_nokey(&ir->dev,&ir->ir); + ir_input_nokey(ir->dev, &ir->ir); } return 0; } @@ -456,6 +456,7 @@ static void saa7134_input_timer(unsigned long data) int saa7134_input_init1(struct saa7134_dev *dev) { struct saa7134_ir *ir; + struct input_dev *input_dev; IR_KEYTAB_TYPE *ir_codes = NULL; u32 mask_keycode = 0; u32 mask_keydown = 0; @@ -535,10 +536,13 @@ int saa7134_input_init1(struct saa7134_dev *dev) return -ENODEV; } - ir = kmalloc(sizeof(*ir),GFP_KERNEL); - if (NULL == ir) + ir = kzalloc(sizeof(*ir), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ir || !input_dev) { + kfree(ir); + input_free_device(input_dev); return -ENOMEM; - memset(ir,0,sizeof(*ir)); + } /* init hardware-specific stuff */ ir->mask_keycode = mask_keycode; @@ -552,19 +556,19 @@ int saa7134_input_init1(struct saa7134_dev *dev) snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(dev->pci)); - ir_input_init(&ir->dev, &ir->ir, ir_type, ir_codes); - ir->dev.name = ir->name; - ir->dev.phys = ir->phys; - ir->dev.id.bustype = BUS_PCI; - ir->dev.id.version = 1; + ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); + input_dev->name = ir->name; + input_dev->phys = ir->phys; + input_dev->id.bustype = BUS_PCI; + input_dev->id.version = 1; if (dev->pci->subsystem_vendor) { - ir->dev.id.vendor = dev->pci->subsystem_vendor; - ir->dev.id.product = dev->pci->subsystem_device; + input_dev->id.vendor = dev->pci->subsystem_vendor; + input_dev->id.product = dev->pci->subsystem_device; } else { - ir->dev.id.vendor = dev->pci->vendor; - ir->dev.id.product = dev->pci->device; + input_dev->id.vendor = dev->pci->vendor; + input_dev->id.product = dev->pci->device; } - ir->dev.dev = &dev->pci->dev; + input_dev->cdev.dev = &dev->pci->dev; /* all done */ dev->remote = ir; @@ -576,8 +580,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) add_timer(&ir->timer); } - input_register_device(&dev->remote->dev); - printk("%s: registered input device for IR\n",dev->name); + input_register_device(ir->dev); return 0; } @@ -586,9 +589,9 @@ void saa7134_input_fini(struct saa7134_dev *dev) if (NULL == dev->remote) return; - input_unregister_device(&dev->remote->dev); if (dev->remote->polling) del_timer_sync(&dev->remote->timer); + input_unregister_device(dev->remote->dev); kfree(dev->remote); dev->remote = NULL; } diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 3ea09142ec9c..860b89530e2a 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -351,7 +351,7 @@ struct saa7134_oss { /* IR input */ struct saa7134_ir { - struct input_dev dev; + struct input_dev *dev; struct ir_input_state ir; char name[32]; char phys[32]; -- GitLab From c7f7a569d9b4ea7c53ab6fcd1377895312d8372b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:41 -0500 Subject: [PATCH 0577/1519] [PATCH] Input: convert drivers/macintosh to dynamic input_dev allocation Input: convert drivers/macntosh to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/macintosh/adbhid.c | 222 +++++++++++++++++++----------------- drivers/macintosh/mac_hid.c | 40 ++++--- 2 files changed, 138 insertions(+), 124 deletions(-) diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index db654e8bd67e..cdb6d0283195 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -206,7 +206,7 @@ u8 adb_to_linux_keycodes[128] = { }; struct adbhid { - struct input_dev input; + struct input_dev *input; int id; int default_id; int original_handler_id; @@ -291,10 +291,10 @@ adbhid_input_keycode(int id, int keycode, int repeat, struct pt_regs *regs) switch (keycode) { case ADB_KEY_CAPSLOCK: /* Generate down/up events for CapsLock everytime. */ - input_regs(&ahid->input, regs); - input_report_key(&ahid->input, KEY_CAPSLOCK, 1); - input_report_key(&ahid->input, KEY_CAPSLOCK, 0); - input_sync(&ahid->input); + input_regs(ahid->input, regs); + input_report_key(ahid->input, KEY_CAPSLOCK, 1); + input_report_key(ahid->input, KEY_CAPSLOCK, 0); + input_sync(ahid->input); return; #ifdef CONFIG_PPC_PMAC case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */ @@ -347,10 +347,10 @@ adbhid_input_keycode(int id, int keycode, int repeat, struct pt_regs *regs) } if (adbhid[id]->keycode[keycode]) { - input_regs(&adbhid[id]->input, regs); - input_report_key(&adbhid[id]->input, + input_regs(adbhid[id]->input, regs); + input_report_key(adbhid[id]->input, adbhid[id]->keycode[keycode], !up_flag); - input_sync(&adbhid[id]->input); + input_sync(adbhid[id]->input); } else printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode, up_flag ? "released" : "pressed"); @@ -441,20 +441,20 @@ adbhid_mouse_input(unsigned char *data, int nb, struct pt_regs *regs, int autopo break; } - input_regs(&adbhid[id]->input, regs); + input_regs(adbhid[id]->input, regs); - input_report_key(&adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1)); - input_report_key(&adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1)); + input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1)); + input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1)); if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD) - input_report_key(&adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1)); + input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1)); - input_report_rel(&adbhid[id]->input, REL_X, + input_report_rel(adbhid[id]->input, REL_X, ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 )); - input_report_rel(&adbhid[id]->input, REL_Y, + input_report_rel(adbhid[id]->input, REL_Y, ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 )); - input_sync(&adbhid[id]->input); + input_sync(adbhid[id]->input); } static void @@ -467,7 +467,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto return; } - input_regs(&adbhid[id]->input, regs); + input_regs(adbhid[id]->input, regs); switch (adbhid[id]->original_handler_id) { default: @@ -477,19 +477,19 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto switch (data[1] & 0x0f) { case 0x0: /* microphone */ - input_report_key(&adbhid[id]->input, KEY_SOUND, down); + input_report_key(adbhid[id]->input, KEY_SOUND, down); break; case 0x1: /* mute */ - input_report_key(&adbhid[id]->input, KEY_MUTE, down); + input_report_key(adbhid[id]->input, KEY_MUTE, down); break; case 0x2: /* volume decrease */ - input_report_key(&adbhid[id]->input, KEY_VOLUMEDOWN, down); + input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down); break; case 0x3: /* volume increase */ - input_report_key(&adbhid[id]->input, KEY_VOLUMEUP, down); + input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down); break; default: @@ -513,19 +513,19 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto switch (data[1] & 0x0f) { case 0x8: /* mute */ - input_report_key(&adbhid[id]->input, KEY_MUTE, down); + input_report_key(adbhid[id]->input, KEY_MUTE, down); break; case 0x7: /* volume decrease */ - input_report_key(&adbhid[id]->input, KEY_VOLUMEDOWN, down); + input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down); break; case 0x6: /* volume increase */ - input_report_key(&adbhid[id]->input, KEY_VOLUMEUP, down); + input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down); break; case 0xb: /* eject */ - input_report_key(&adbhid[id]->input, KEY_EJECTCD, down); + input_report_key(adbhid[id]->input, KEY_EJECTCD, down); break; case 0xa: /* brightness decrease */ @@ -539,7 +539,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto } } #endif /* CONFIG_PMAC_BACKLIGHT */ - input_report_key(&adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); + input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); break; case 0x9: /* brightness increase */ @@ -553,19 +553,19 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto } } #endif /* CONFIG_PMAC_BACKLIGHT */ - input_report_key(&adbhid[id]->input, KEY_BRIGHTNESSUP, down); + input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down); break; case 0xc: /* videomode switch */ - input_report_key(&adbhid[id]->input, KEY_SWITCHVIDEOMODE, down); + input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down); break; case 0xd: /* keyboard illumination toggle */ - input_report_key(&adbhid[id]->input, KEY_KBDILLUMTOGGLE, down); + input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down); break; case 0xe: /* keyboard illumination decrease */ - input_report_key(&adbhid[id]->input, KEY_KBDILLUMDOWN, down); + input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down); break; case 0xf: @@ -573,7 +573,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto case 0x8f: case 0x0f: /* keyboard illumination increase */ - input_report_key(&adbhid[id]->input, KEY_KBDILLUMUP, down); + input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down); break; case 0x7f: @@ -596,7 +596,7 @@ adbhid_buttons_input(unsigned char *data, int nb, struct pt_regs *regs, int auto break; } - input_sync(&adbhid[id]->input); + input_sync(adbhid[id]->input); } static struct adb_request led_request; @@ -683,7 +683,7 @@ adb_message_handler(struct notifier_block *this, unsigned long code, void *x) int i; for (i = 1; i < 16; i++) { if (adbhid[i]) - del_timer_sync(&adbhid[i]->input.timer); + del_timer_sync(&adbhid[i]->input->timer); } } @@ -699,153 +699,163 @@ adb_message_handler(struct notifier_block *this, unsigned long code, void *x) return NOTIFY_DONE; } -static void +static int adbhid_input_register(int id, int default_id, int original_handler_id, int current_handler_id, int mouse_kind) { + struct adbhid *hid; + struct input_dev *input_dev; + int err; int i; if (adbhid[id]) { printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id); - return; + return -EEXIST; } - if (!(adbhid[id] = kmalloc(sizeof(struct adbhid), GFP_KERNEL))) - return; - - memset(adbhid[id], 0, sizeof(struct adbhid)); - sprintf(adbhid[id]->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id); + adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!hid || !input_dev) { + err = -ENOMEM; + goto fail; - init_input_dev(&adbhid[id]->input); + } - adbhid[id]->id = default_id; - adbhid[id]->original_handler_id = original_handler_id; - adbhid[id]->current_handler_id = current_handler_id; - adbhid[id]->mouse_kind = mouse_kind; - adbhid[id]->flags = 0; - adbhid[id]->input.private = adbhid[id]; - adbhid[id]->input.name = adbhid[id]->name; - adbhid[id]->input.phys = adbhid[id]->phys; - adbhid[id]->input.id.bustype = BUS_ADB; - adbhid[id]->input.id.vendor = 0x0001; - adbhid[id]->input.id.product = (id << 12) | (default_id << 8) | original_handler_id; - adbhid[id]->input.id.version = 0x0100; + sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id); + + hid->id = default_id; + hid->original_handler_id = original_handler_id; + hid->current_handler_id = current_handler_id; + hid->mouse_kind = mouse_kind; + hid->flags = 0; + input_dev->private = hid; + input_dev->name = hid->name; + input_dev->phys = hid->phys; + input_dev->id.bustype = BUS_ADB; + input_dev->id.vendor = 0x0001; + input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id; + input_dev->id.version = 0x0100; switch (default_id) { case ADB_KEYBOARD: - if (!(adbhid[id]->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL))) { - kfree(adbhid[id]); - return; + hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL); + if (!hid->keycode) { + err = -ENOMEM; + goto fail; } - sprintf(adbhid[id]->name, "ADB keyboard"); + sprintf(hid->name, "ADB keyboard"); - memcpy(adbhid[id]->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes)); + memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes)); printk(KERN_INFO "Detected ADB keyboard, type "); switch (original_handler_id) { default: printk(".\n"); - adbhid[id]->input.id.version = ADB_KEYBOARD_UNKNOWN; + input_dev->id.version = ADB_KEYBOARD_UNKNOWN; break; case 0x01: case 0x02: case 0x03: case 0x06: case 0x08: case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C: case 0xC0: case 0xC3: case 0xC6: printk("ANSI.\n"); - adbhid[id]->input.id.version = ADB_KEYBOARD_ANSI; + input_dev->id.version = ADB_KEYBOARD_ANSI; break; case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D: case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1: case 0xC4: case 0xC7: printk("ISO, swapping keys.\n"); - adbhid[id]->input.id.version = ADB_KEYBOARD_ISO; - i = adbhid[id]->keycode[10]; - adbhid[id]->keycode[10] = adbhid[id]->keycode[50]; - adbhid[id]->keycode[50] = i; + input_dev->id.version = ADB_KEYBOARD_ISO; + i = hid->keycode[10]; + hid->keycode[10] = hid->keycode[50]; + hid->keycode[50] = i; break; case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A: case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9: printk("JIS.\n"); - adbhid[id]->input.id.version = ADB_KEYBOARD_JIS; + input_dev->id.version = ADB_KEYBOARD_JIS; break; } for (i = 0; i < 128; i++) - if (adbhid[id]->keycode[i]) - set_bit(adbhid[id]->keycode[i], adbhid[id]->input.keybit); - - adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); - adbhid[id]->input.ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML); - adbhid[id]->input.event = adbhid_kbd_event; - adbhid[id]->input.keycodemax = 127; - adbhid[id]->input.keycodesize = 1; + if (hid->keycode[i]) + set_bit(hid->keycode[i], input_dev->keybit); + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP); + input_dev->ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML); + input_dev->event = adbhid_kbd_event; + input_dev->keycodemax = 127; + input_dev->keycodesize = 1; break; case ADB_MOUSE: - sprintf(adbhid[id]->name, "ADB mouse"); + sprintf(hid->name, "ADB mouse"); - adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - adbhid[id]->input.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - adbhid[id]->input.relbit[0] = BIT(REL_X) | BIT(REL_Y); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y); break; case ADB_MISC: switch (original_handler_id) { case 0x02: /* Adjustable keyboard button device */ - sprintf(adbhid[id]->name, "ADB adjustable keyboard buttons"); - adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - set_bit(KEY_SOUND, adbhid[id]->input.keybit); - set_bit(KEY_MUTE, adbhid[id]->input.keybit); - set_bit(KEY_VOLUMEUP, adbhid[id]->input.keybit); - set_bit(KEY_VOLUMEDOWN, adbhid[id]->input.keybit); + sprintf(hid->name, "ADB adjustable keyboard buttons"); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + set_bit(KEY_SOUND, input_dev->keybit); + set_bit(KEY_MUTE, input_dev->keybit); + set_bit(KEY_VOLUMEUP, input_dev->keybit); + set_bit(KEY_VOLUMEDOWN, input_dev->keybit); break; case 0x1f: /* Powerbook button device */ - sprintf(adbhid[id]->name, "ADB Powerbook buttons"); - adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - set_bit(KEY_MUTE, adbhid[id]->input.keybit); - set_bit(KEY_VOLUMEUP, adbhid[id]->input.keybit); - set_bit(KEY_VOLUMEDOWN, adbhid[id]->input.keybit); - set_bit(KEY_BRIGHTNESSUP, adbhid[id]->input.keybit); - set_bit(KEY_BRIGHTNESSDOWN, adbhid[id]->input.keybit); - set_bit(KEY_EJECTCD, adbhid[id]->input.keybit); - set_bit(KEY_SWITCHVIDEOMODE, adbhid[id]->input.keybit); - set_bit(KEY_KBDILLUMTOGGLE, adbhid[id]->input.keybit); - set_bit(KEY_KBDILLUMDOWN, adbhid[id]->input.keybit); - set_bit(KEY_KBDILLUMUP, adbhid[id]->input.keybit); + sprintf(hid->name, "ADB Powerbook buttons"); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + set_bit(KEY_MUTE, input_dev->keybit); + set_bit(KEY_VOLUMEUP, input_dev->keybit); + set_bit(KEY_VOLUMEDOWN, input_dev->keybit); + set_bit(KEY_BRIGHTNESSUP, input_dev->keybit); + set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit); + set_bit(KEY_EJECTCD, input_dev->keybit); + set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit); + set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit); + set_bit(KEY_KBDILLUMDOWN, input_dev->keybit); + set_bit(KEY_KBDILLUMUP, input_dev->keybit); break; } - if (adbhid[id]->name[0]) + if (hid->name[0]) break; /* else fall through */ default: printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n"); - kfree(adbhid[id]); - return; + err = -ENODEV; + goto fail; } - adbhid[id]->input.keycode = adbhid[id]->keycode; - - input_register_device(&adbhid[id]->input); + input_dev->keycode = hid->keycode; - printk(KERN_INFO "input: %s on %s\n", - adbhid[id]->name, adbhid[id]->phys); + input_register_device(input_dev); if (default_id == ADB_KEYBOARD) { /* HACK WARNING!! This should go away as soon there is an utility * to control that for event devices. */ - adbhid[id]->input.rep[REP_DELAY] = 500; /* input layer default: 250 */ - adbhid[id]->input.rep[REP_PERIOD] = 66; /* input layer default: 33 */ + input_dev->rep[REP_DELAY] = 500; /* input layer default: 250 */ + input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */ } + + return 0; + + fail: input_free_device(input_dev); + kfree(hid); + adbhid[id] = NULL; + return err; } static void adbhid_input_unregister(int id) { - input_unregister_device(&adbhid[id]->input); + input_unregister_device(adbhid[id]->input); if (adbhid[id]->keycode) kfree(adbhid[id]->keycode); kfree(adbhid[id]); @@ -858,7 +868,7 @@ adbhid_input_reregister(int id, int default_id, int org_handler_id, int cur_handler_id, int mk) { if (adbhid[id]) { - if (adbhid[id]->input.id.product != + if (adbhid[id]->input->id.product != ((id << 12)|(default_id << 8)|org_handler_id)) { adbhid_input_unregister(id); adbhid_input_register(id, default_id, org_handler_id, diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c index 5ad3a5a9eb7f..a66636116f0b 100644 --- a/drivers/macintosh/mac_hid.c +++ b/drivers/macintosh/mac_hid.c @@ -16,8 +16,8 @@ #include -static struct input_dev emumousebtn; -static void emumousebtn_input_register(void); +static struct input_dev *emumousebtn; +static int emumousebtn_input_register(void); static int mouse_emulate_buttons = 0; static int mouse_button2_keycode = KEY_RIGHTCTRL; /* right control key */ static int mouse_button3_keycode = KEY_RIGHTALT; /* right option key */ @@ -90,10 +90,10 @@ int mac_hid_mouse_emulate_buttons(int caller, unsigned int keycode, int down) && (keycode == mouse_button2_keycode || keycode == mouse_button3_keycode)) { if (mouse_emulate_buttons == 1) { - input_report_key(&emumousebtn, + input_report_key(emumousebtn, keycode == mouse_button2_keycode ? BTN_MIDDLE : BTN_RIGHT, down); - input_sync(&emumousebtn); + input_sync(emumousebtn); return 1; } mouse_last_keycode = down ? keycode : 0; @@ -105,30 +105,34 @@ int mac_hid_mouse_emulate_buttons(int caller, unsigned int keycode, int down) EXPORT_SYMBOL(mac_hid_mouse_emulate_buttons); -static void emumousebtn_input_register(void) +static int emumousebtn_input_register(void) { - emumousebtn.name = "Macintosh mouse button emulation"; + emumousebtn = input_allocate_device(); + if (!emumousebtn) + return -ENOMEM; - init_input_dev(&emumousebtn); + emumousebtn->name = "Macintosh mouse button emulation"; + emumousebtn->id.bustype = BUS_ADB; + emumousebtn->id.vendor = 0x0001; + emumousebtn->id.product = 0x0001; + emumousebtn->id.version = 0x0100; - emumousebtn.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); - emumousebtn.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - emumousebtn.relbit[0] = BIT(REL_X) | BIT(REL_Y); + emumousebtn->evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + emumousebtn->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + emumousebtn->relbit[0] = BIT(REL_X) | BIT(REL_Y); - emumousebtn.id.bustype = BUS_ADB; - emumousebtn.id.vendor = 0x0001; - emumousebtn.id.product = 0x0001; - emumousebtn.id.version = 0x0100; + input_register_device(emumousebtn); - input_register_device(&emumousebtn); - - printk(KERN_INFO "input: Macintosh mouse button emulation\n"); + return 0; } int __init mac_hid_init(void) { + int err; - emumousebtn_input_register(); + err = emumousebtn_input_register(); + if (err) + return err; #if defined(CONFIG_SYSCTL) mac_hid_sysctl_header = register_sysctl_table(mac_hid_root_dir, 1); -- GitLab From 0259567ad60df13a55583b84d2cddb5526705907 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:42 -0500 Subject: [PATCH 0578/1519] [PATCH] Input: convert konicawc to dynamic input_dev allocation Input: convert konicawc to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/media/konicawc.c | 89 ++++++++++++++++++++++++------------ 1 file changed, 61 insertions(+), 28 deletions(-) diff --git a/drivers/usb/media/konicawc.c b/drivers/usb/media/konicawc.c index 20ac9e1069d4..9fe2c2710d13 100644 --- a/drivers/usb/media/konicawc.c +++ b/drivers/usb/media/konicawc.c @@ -119,7 +119,7 @@ struct konicawc { int yplanesz; /* Number of bytes in the Y plane */ unsigned int buttonsts:1; #ifdef CONFIG_INPUT - struct input_dev input; + struct input_dev *input; char input_physname[64]; #endif }; @@ -218,6 +218,57 @@ static void konicawc_adjust_picture(struct uvd *uvd) konicawc_camera_on(uvd); } +#ifdef CONFIG_INPUT + +static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) +{ + struct input_dev *input_dev; + + usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); + strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); + + cam->input = input_dev = input_allocate_device(); + if (!input_dev) { + warn("Not enough memory for camera's input device\n"); + return; + } + + input_dev->name = "Konicawc snapshot button"; + input_dev->phys = cam->input_physname; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &dev->dev; + + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + + input_dev->private = cam; + + input_register_device(cam->input); +} + +static void konicawc_unregister_input(struct konicawc *cam) +{ + if (cam->input) { + input_unregister_device(cam->input); + cam->input = NULL; + } +} + +static void konicawc_report_buttonstat(struct konicawc *cam) +{ + if (cam->input) { + input_report_key(cam->input, BTN_0, cam->buttonsts); + input_sync(cam->input); + } +} + +#else + +static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { } +static inline void konicawc_unregister_input(struct konicawc *cam) { } +static inline void konicawc_report_buttonstat(struct konicawc *cam) { } + +#endif /* CONFIG_INPUT */ static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb) { @@ -273,10 +324,7 @@ static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct ur if(button != cam->buttonsts) { DEBUG(2, "button: %sclicked", button ? "" : "un"); cam->buttonsts = button; -#ifdef CONFIG_INPUT - input_report_key(&cam->input, BTN_0, cam->buttonsts); - input_sync(&cam->input); -#endif + konicawc_report_buttonstat(cam); } if(sts == 0x01) { /* drop frame */ @@ -645,9 +693,9 @@ static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw) RingQueue_Flush(&uvd->dp); cam->lastframe = -2; if(uvd->curframe != -1) { - uvd->frame[uvd->curframe].curline = 0; - uvd->frame[uvd->curframe].seqRead_Length = 0; - uvd->frame[uvd->curframe].seqRead_Index = 0; + uvd->frame[uvd->curframe].curline = 0; + uvd->frame[uvd->curframe].seqRead_Length = 0; + uvd->frame[uvd->curframe].seqRead_Index = 0; } konicawc_start_data(uvd); @@ -718,7 +766,6 @@ static void konicawc_configure_video(struct uvd *uvd) DEBUG(1, "setting initial values"); } - static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid) { struct usb_device *dev = interface_to_usbdev(intf); @@ -839,21 +886,8 @@ static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id err("usbvideo_RegisterVideoDevice() failed."); uvd = NULL; } -#ifdef CONFIG_INPUT - /* Register input device for button */ - memset(&cam->input, 0, sizeof(struct input_dev)); - cam->input.name = "Konicawc snapshot button"; - cam->input.private = cam; - cam->input.evbit[0] = BIT(EV_KEY); - cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0); - usb_to_input_id(dev, &cam->input.id); - input_register_device(&cam->input); - - usb_make_path(dev, cam->input_physname, 56); - strcat(cam->input_physname, "/input0"); - cam->input.phys = cam->input_physname; - info("konicawc: %s on %s\n", cam->input.name, cam->input.phys); -#endif + + konicawc_register_input(cam, dev); } if (uvd) { @@ -869,10 +903,9 @@ static void konicawc_free_uvd(struct uvd *uvd) int i; struct konicawc *cam = (struct konicawc *)uvd->user_data; -#ifdef CONFIG_INPUT - input_unregister_device(&cam->input); -#endif - for (i=0; i < USBVIDEO_NUMSBUF; i++) { + konicawc_unregister_input(cam); + + for (i = 0; i < USBVIDEO_NUMSBUF; i++) { usb_free_urb(cam->sts_urb[i]); cam->sts_urb[i] = NULL; } -- GitLab From 17dd3f0f7aa729a042af5d3318ff9b3e7781b45b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:52 -0500 Subject: [PATCH 0579/1519] [PATCH] drivers/input/joystick: convert to dynamic input_dev allocation Input: convert drivers/input/joystick to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/joystick/adi.c | 93 ++-- drivers/input/joystick/amijoy.c | 85 ++-- drivers/input/joystick/analog.c | 96 ++--- drivers/input/joystick/cobra.c | 66 +-- drivers/input/joystick/db9.c | 292 ++++++++----- drivers/input/joystick/gamecon.c | 396 ++++++++++-------- drivers/input/joystick/gf2k.c | 69 +-- drivers/input/joystick/grip.c | 77 ++-- drivers/input/joystick/grip_mp.c | 149 ++++--- drivers/input/joystick/guillemot.c | 51 ++- drivers/input/joystick/iforce/iforce-main.c | 106 +++-- .../input/joystick/iforce/iforce-packets.c | 5 +- drivers/input/joystick/iforce/iforce-serio.c | 10 +- drivers/input/joystick/iforce/iforce-usb.c | 22 +- drivers/input/joystick/iforce/iforce.h | 2 +- drivers/input/joystick/interact.c | 53 +-- drivers/input/joystick/magellan.c | 71 ++-- drivers/input/joystick/sidewinder.c | 70 ++-- drivers/input/joystick/spaceball.c | 82 ++-- drivers/input/joystick/spaceorb.c | 78 ++-- drivers/input/joystick/stinger.c | 75 ++-- drivers/input/joystick/tmdc.c | 324 ++++++++------ drivers/input/joystick/turbografx.c | 215 ++++++---- drivers/input/joystick/twidjoy.c | 120 +++--- drivers/input/joystick/warrior.c | 83 ++-- 25 files changed, 1460 insertions(+), 1230 deletions(-) diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c index cf35ae638a0d..9d95459f4bcb 100644 --- a/drivers/input/joystick/adi.c +++ b/drivers/input/joystick/adi.c @@ -54,7 +54,7 @@ MODULE_LICENSE("GPL"); #define ADI_MIN_LENGTH 8 #define ADI_MIN_LEN_LENGTH 10 #define ADI_MIN_ID_LENGTH 66 -#define ADI_MAX_NAME_LENGTH 48 +#define ADI_MAX_NAME_LENGTH 64 #define ADI_MAX_CNAME_LENGTH 16 #define ADI_MAX_PHYS_LENGTH 64 @@ -106,7 +106,7 @@ static struct { */ struct adi { - struct input_dev dev; + struct input_dev *dev; int length; int ret; int idx; @@ -215,7 +215,7 @@ static inline int adi_get_bits(struct adi *adi, int count) static int adi_decode(struct adi *adi) { - struct input_dev *dev = &adi->dev; + struct input_dev *dev = adi->dev; char *abs = adi->abs; short *key = adi->key; int i, t; @@ -318,7 +318,8 @@ static void adi_init_digital(struct gameport *gameport) for (i = 0; seq[i]; i++) { gameport_trigger(gameport); - if (seq[i] > 0) msleep(seq[i]); + if (seq[i] > 0) + msleep(seq[i]); if (seq[i] < 0) { mdelay(-seq[i]); udelay(-seq[i]*14); /* It looks like mdelay() is off by approx 1.4% */ @@ -397,42 +398,46 @@ static void adi_id_decode(struct adi *adi, struct adi_port *port) } } -static void adi_init_input(struct adi *adi, struct adi_port *port, int half) +static int adi_init_input(struct adi *adi, struct adi_port *port, int half) { - int i, t; + struct input_dev *input_dev; char buf[ADI_MAX_NAME_LENGTH]; + int i, t; - if (!adi->length) return; - - init_input_dev(&adi->dev); + adi->dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; t = adi->id < ADI_ID_MAX ? adi->id : ADI_ID_MAX; snprintf(buf, ADI_MAX_PHYS_LENGTH, adi_names[t], adi->id); - snprintf(adi->name, ADI_MAX_NAME_LENGTH, "Logitech %s", buf); + snprintf(adi->name, ADI_MAX_NAME_LENGTH, "Logitech %s [%s]", buf, adi->cname); snprintf(adi->phys, ADI_MAX_PHYS_LENGTH, "%s/input%d", port->gameport->phys, half); adi->abs = adi_abs[t]; adi->key = adi_key[t]; - adi->dev.open = adi_open; - adi->dev.close = adi_close; + input_dev->name = adi->name; + input_dev->phys = adi->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_LOGITECH; + input_dev->id.product = adi->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &port->gameport->dev; + input_dev->private = port; - adi->dev.name = adi->name; - adi->dev.phys = adi->phys; - adi->dev.id.bustype = BUS_GAMEPORT; - adi->dev.id.vendor = GAMEPORT_ID_VENDOR_LOGITECH; - adi->dev.id.product = adi->id; - adi->dev.id.version = 0x0100; + input_dev->open = adi_open; + input_dev->close = adi_close; - adi->dev.private = port; - adi->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) - set_bit(adi->abs[i], adi->dev.absbit); + set_bit(adi->abs[i], input_dev->absbit); for (i = 0; i < adi->buttons; i++) - set_bit(adi->key[i], adi->dev.keybit); + set_bit(adi->key[i], input_dev->keybit); + + return 0; } static void adi_init_center(struct adi *adi) @@ -445,17 +450,17 @@ static void adi_init_center(struct adi *adi) for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) { t = adi->abs[i]; - x = adi->dev.abs[t]; + x = adi->dev->abs[t]; if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE) x = i < adi->axes10 ? 512 : 128; if (i < adi->axes10) - input_set_abs_params(&adi->dev, t, 64, x * 2 - 64, 2, 16); + input_set_abs_params(adi->dev, t, 64, x * 2 - 64, 2, 16); else if (i < adi->axes10 + adi->axes8) - input_set_abs_params(&adi->dev, t, 48, x * 2 - 48, 1, 16); + input_set_abs_params(adi->dev, t, 48, x * 2 - 48, 1, 16); else - input_set_abs_params(&adi->dev, t, -1, 1, 0, 0); + input_set_abs_params(adi->dev, t, -1, 1, 0, 0); } } @@ -469,7 +474,8 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv) int i; int err; - if (!(port = kzalloc(sizeof(struct adi_port), GFP_KERNEL))) + port = kzalloc(sizeof(struct adi_port), GFP_KERNEL); + if (!port) return -ENOMEM; port->gameport = gameport; @@ -477,10 +483,8 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv) gameport_set_drvdata(gameport, port); err = gameport_open(gameport, drv, GAMEPORT_MODE_RAW); - if (err) { - kfree(port); - return err; - } + if (err) + goto fail1; adi_init_digital(gameport); adi_read_packet(port); @@ -490,13 +494,18 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv) for (i = 0; i < 2; i++) { adi_id_decode(port->adi + i, port); - adi_init_input(port->adi + i, port, i); + + if (!port->adi[i].length) + continue; + + err = adi_init_input(port->adi + i, port, i); + if (err) + goto fail2; } if (!port->adi[0].length && !port->adi[1].length) { - gameport_close(gameport); - kfree(port); - return -ENODEV; + err = -ENODEV; + goto fail2; } gameport_set_poll_handler(gameport, adi_poll); @@ -511,12 +520,18 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv) for (i = 0; i < 2; i++) if (port->adi[i].length > 0) { adi_init_center(port->adi + i); - input_register_device(&port->adi[i].dev); - printk(KERN_INFO "input: %s [%s] on %s\n", - port->adi[i].name, port->adi[i].cname, gameport->phys); + input_register_device(port->adi[i].dev); } return 0; + + fail2: for (i = 0; i < 2; i++) + if (port->adi[i].dev) + input_free_device(port->adi[i].dev); + gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); + kfree(port); + return err; } static void adi_disconnect(struct gameport *gameport) @@ -526,7 +541,7 @@ static void adi_disconnect(struct gameport *gameport) for (i = 0; i < 2; i++) if (port->adi[i].length > 0) - input_unregister_device(&port->adi[i].dev); + input_unregister_device(port->adi[i].dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(port); diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c index e996183c5b06..8558a99f6635 100644 --- a/drivers/input/joystick/amijoy.c +++ b/drivers/input/joystick/amijoy.c @@ -53,11 +53,9 @@ __obsolete_setup("amijoy="); static int amijoy_used; static DECLARE_MUTEX(amijoy_sem); -static struct input_dev amijoy_dev[2]; +static struct input_dev *amijoy_dev[2]; static char *amijoy_phys[2] = { "amijoy/input0", "amijoy/input1" }; -static char *amijoy_name = "Amiga joystick"; - static irqreturn_t amijoy_interrupt(int irq, void *dummy, struct pt_regs *fp) { int i, data = 0, button = 0; @@ -70,15 +68,15 @@ static irqreturn_t amijoy_interrupt(int irq, void *dummy, struct pt_regs *fp) case 1: data = ~custom.joy1dat; button = (~ciaa.pra >> 7) & 1; break; } - input_regs(amijoy_dev + i, fp); + input_regs(amijoy_dev[i], fp); - input_report_key(amijoy_dev + i, BTN_TRIGGER, button); + input_report_key(amijoy_dev[i], BTN_TRIGGER, button); - input_report_abs(amijoy_dev + i, ABS_X, ((data >> 1) & 1) - ((data >> 9) & 1)); + input_report_abs(amijoy_dev[i], ABS_X, ((data >> 1) & 1) - ((data >> 9) & 1)); data = ~(data ^ (data << 1)); - input_report_abs(amijoy_dev + i, ABS_Y, ((data >> 1) & 1) - ((data >> 9) & 1)); + input_report_abs(amijoy_dev[i], ABS_Y, ((data >> 1) & 1) - ((data >> 9) & 1)); - input_sync(amijoy_dev + i); + input_sync(amijoy_dev[i]); } return IRQ_HANDLED; } @@ -114,39 +112,52 @@ static void amijoy_close(struct input_dev *dev) static int __init amijoy_init(void) { int i, j; + int err; - for (i = 0; i < 2; i++) - if (amijoy[i]) { - if (!request_mem_region(CUSTOM_PHYSADDR+10+i*2, 2, - "amijoy [Denise]")) { - if (i == 1 && amijoy[0]) { - input_unregister_device(amijoy_dev); - release_mem_region(CUSTOM_PHYSADDR+10, 2); - } - return -EBUSY; - } + for (i = 0; i < 2; i++) { + if (!amijoy[i]) + continue; - amijoy_dev[i].open = amijoy_open; - amijoy_dev[i].close = amijoy_close; - amijoy_dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - amijoy_dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - amijoy_dev[i].keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); - for (j = 0; j < 2; j++) { - amijoy_dev[i].absmin[ABS_X + j] = -1; - amijoy_dev[i].absmax[ABS_X + j] = 1; - } + amijoy_dev[i] = input_allocate_device(); + if (!amijoy_dev[i]) { + err = -ENOMEM; + goto fail; + } - amijoy_dev[i].name = amijoy_name; - amijoy_dev[i].phys = amijoy_phys[i]; - amijoy_dev[i].id.bustype = BUS_AMIGA; - amijoy_dev[i].id.vendor = 0x0001; - amijoy_dev[i].id.product = 0x0003; - amijoy_dev[i].id.version = 0x0100; + if (!request_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2, "amijoy [Denise]")) { + input_free_device(amijoy_dev[i]); + err = -EBUSY; + goto fail; + } - input_register_device(amijoy_dev + i); - printk(KERN_INFO "input: %s at joy%ddat\n", amijoy_name, i); + amijoy_dev[i]->name = "Amiga joystick"; + amijoy_dev[i]->phys = amijoy_phys[i]; + amijoy_dev[i]->id.bustype = BUS_AMIGA; + amijoy_dev[i]->id.vendor = 0x0001; + amijoy_dev[i]->id.product = 0x0003; + amijoy_dev[i]->id.version = 0x0100; + + amijoy_dev[i]->open = amijoy_open; + amijoy_dev[i]->close = amijoy_close; + + amijoy_dev[i]->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + amijoy_dev[i]->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + amijoy_dev[i]->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT); + for (j = 0; j < 2; j++) { + amijoy_dev[i]->absmin[ABS_X + j] = -1; + amijoy_dev[i]->absmax[ABS_X + j] = 1; } + + input_register_device(amijoy_dev[i]); + } return 0; + + fail: while (--i >= 0) + if (amijoy[i]) { + input_unregister_device(amijoy_dev[i]); + release_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2); + } + return err; } static void __exit amijoy_exit(void) @@ -155,8 +166,8 @@ static void __exit amijoy_exit(void) for (i = 0; i < 2; i++) if (amijoy[i]) { - input_unregister_device(amijoy_dev + i); - release_mem_region(CUSTOM_PHYSADDR+10+i*2, 2); + input_unregister_device(amijoy_dev[i]); + release_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2); } } diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 64b1313a3c66..c75ac6eb1ffb 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -111,7 +111,7 @@ static short analog_joy_btn[] = { BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN static unsigned char analog_chf[] = { 0xf, 0x0, 0x1, 0x9, 0x2, 0x4, 0xc, 0x8, 0x3, 0x5, 0xb, 0x7, 0xd, 0xe, 0xa, 0x6 }; struct analog { - struct input_dev dev; + struct input_dev *dev; int mask; short *buttons; char name[ANALOG_MAX_NAME_LENGTH]; @@ -182,7 +182,7 @@ static unsigned long analog_faketime = 0; static void analog_decode(struct analog *analog, int *axes, int *initial, int buttons) { - struct input_dev *dev = &analog->dev; + struct input_dev *dev = analog->dev; int i, j; if (analog->mask & ANALOG_HAT_FCS) @@ -428,27 +428,30 @@ static void analog_name(struct analog *analog) * analog_init_device() */ -static void analog_init_device(struct analog_port *port, struct analog *analog, int index) +static int analog_init_device(struct analog_port *port, struct analog *analog, int index) { + struct input_dev *input_dev; int i, j, t, v, w, x, y, z; analog_name(analog); sprintf(analog->phys, "%s/input%d", port->gameport->phys, index); analog->buttons = (analog->mask & ANALOG_GAMEPAD) ? analog_pad_btn : analog_joy_btn; - init_input_dev(&analog->dev); + analog->dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; - analog->dev.name = analog->name; - analog->dev.phys = analog->phys; - analog->dev.id.bustype = BUS_GAMEPORT; - analog->dev.id.vendor = GAMEPORT_ID_VENDOR_ANALOG; - analog->dev.id.product = analog->mask >> 4; - analog->dev.id.version = 0x0100; + input_dev->name = analog->name; + input_dev->phys = analog->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_ANALOG; + input_dev->id.product = analog->mask >> 4; + input_dev->id.version = 0x0100; - analog->dev.open = analog_open; - analog->dev.close = analog_close; - analog->dev.private = port; - analog->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->open = analog_open; + input_dev->close = analog_close; + input_dev->private = port; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = j = 0; i < 4; i++) if (analog->mask & (1 << i)) { @@ -461,8 +464,6 @@ static void analog_init_device(struct analog_port *port, struct analog *analog, v = (x >> 3); w = (x >> 3); - set_bit(t, analog->dev.absbit); - if ((i == 2 || i == 3) && (j == 2 || j == 3) && (z > (y >> 3))) x = y; @@ -472,11 +473,7 @@ static void analog_init_device(struct analog_port *port, struct analog *analog, w = (x >> 4); } - analog->dev.absmax[t] = (x << 1) - v; - analog->dev.absmin[t] = v; - analog->dev.absfuzz[t] = port->fuzz; - analog->dev.absflat[t] = w; - + input_set_abs_params(input_dev, t, v, (x << 1) - v, port->fuzz, w); j++; } @@ -484,41 +481,30 @@ static void analog_init_device(struct analog_port *port, struct analog *analog, if (analog->mask & analog_exts[i]) for (x = 0; x < 2; x++) { t = analog_hats[j++]; - set_bit(t, analog->dev.absbit); - analog->dev.absmax[t] = 1; - analog->dev.absmin[t] = -1; + input_set_abs_params(input_dev, t, -1, 1, 0, 0); } for (i = j = 0; i < 4; i++) if (analog->mask & (0x10 << i)) - set_bit(analog->buttons[j++], analog->dev.keybit); + set_bit(analog->buttons[j++], input_dev->keybit); if (analog->mask & ANALOG_BTNS_CHF) for (i = 0; i < 2; i++) - set_bit(analog->buttons[j++], analog->dev.keybit); + set_bit(analog->buttons[j++], input_dev->keybit); if (analog->mask & ANALOG_HBTN_CHF) for (i = 0; i < 4; i++) - set_bit(analog->buttons[j++], analog->dev.keybit); + set_bit(analog->buttons[j++], input_dev->keybit); for (i = 0; i < 4; i++) if (analog->mask & (ANALOG_BTN_TL << i)) - set_bit(analog_pads[i], analog->dev.keybit); + set_bit(analog_pads[i], input_dev->keybit); analog_decode(analog, port->axes, port->initial, port->buttons); - input_register_device(&analog->dev); + input_register_device(analog->dev); - printk(KERN_INFO "input: %s at %s", analog->name, port->gameport->phys); - - if (port->cooked) - printk(" [ADC port]\n"); - else - printk(" [%s timer, %d %sHz clock, %d ns res]\n", TIME_NAME, - port->speed > 10000 ? (port->speed + 800) / 1000 : port->speed, - port->speed > 10000 ? "M" : "k", - port->speed > 10000 ? (port->loop * 1000) / (port->speed / 1000) - : (port->loop * 1000000) / port->speed); + return 0; } /* @@ -659,37 +645,41 @@ static int analog_connect(struct gameport *gameport, struct gameport_driver *drv return - ENOMEM; err = analog_init_port(gameport, drv, port); - if (err) { - kfree(port); - return err; - } + if (err) + goto fail1; err = analog_init_masks(port); - if (err) { - gameport_close(gameport); - gameport_set_drvdata(gameport, NULL); - kfree(port); - return err; - } + if (err) + goto fail2; gameport_set_poll_handler(gameport, analog_poll); gameport_set_poll_interval(gameport, 10); for (i = 0; i < 2; i++) - if (port->analog[i].mask) - analog_init_device(port, port->analog + i, i); + if (port->analog[i].mask) { + err = analog_init_device(port, port->analog + i, i); + if (err) + goto fail3; + } return 0; + + fail3: while (--i >= 0) + input_unregister_device(port->analog[i].dev); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); + kfree(port); + return err; } static void analog_disconnect(struct gameport *gameport) { - int i; struct analog_port *port = gameport_get_drvdata(gameport); + int i; for (i = 0; i < 2; i++) if (port->analog[i].mask) - input_unregister_device(&port->analog[i].dev); + input_unregister_device(port->analog[i].dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); printk(KERN_INFO "analog.c: %d out of %d reads (%d%%) on %s failed\n", diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c index 0b2e9fa26579..9a3dfc724a41 100644 --- a/drivers/input/joystick/cobra.c +++ b/drivers/input/joystick/cobra.c @@ -44,13 +44,11 @@ MODULE_LICENSE("GPL"); #define COBRA_MAX_STROBE 45 /* 45 us max wait for first strobe */ #define COBRA_LENGTH 36 -static char* cobra_name = "Creative Labs Blaster GamePad Cobra"; - static int cobra_btn[] = { BTN_START, BTN_SELECT, BTN_TL, BTN_TR, BTN_X, BTN_Y, BTN_Z, BTN_A, BTN_B, BTN_C, BTN_TL2, BTN_TR2, 0 }; struct cobra { struct gameport *gameport; - struct input_dev dev[2]; + struct input_dev *dev[2]; int reads; int bads; unsigned char exists; @@ -128,7 +126,7 @@ static void cobra_poll(struct gameport *gameport) for (i = 0; i < 2; i++) if (cobra->exists & r & (1 << i)) { - dev = cobra->dev + i; + dev = cobra->dev[i]; input_report_abs(dev, ABS_X, ((data[i] >> 4) & 1) - ((data[i] >> 3) & 1)); input_report_abs(dev, ABS_Y, ((data[i] >> 2) & 1) - ((data[i] >> 1) & 1)); @@ -159,11 +157,13 @@ static void cobra_close(struct input_dev *dev) static int cobra_connect(struct gameport *gameport, struct gameport_driver *drv) { struct cobra *cobra; + struct input_dev *input_dev; unsigned int data[2]; int i, j; int err; - if (!(cobra = kzalloc(sizeof(struct cobra), GFP_KERNEL))) + cobra = kzalloc(sizeof(struct cobra), GFP_KERNEL); + if (!cobra) return -ENOMEM; cobra->gameport = gameport; @@ -191,38 +191,46 @@ static int cobra_connect(struct gameport *gameport, struct gameport_driver *drv) gameport_set_poll_handler(gameport, cobra_poll); gameport_set_poll_interval(gameport, 20); - for (i = 0; i < 2; i++) - if ((cobra->exists >> i) & 1) { - - sprintf(cobra->phys[i], "%s/input%d", gameport->phys, i); + for (i = 0; i < 2; i++) { + if (~(cobra->exists >> i) & 1) + continue; - cobra->dev[i].private = cobra; - cobra->dev[i].open = cobra_open; - cobra->dev[i].close = cobra_close; + cobra->dev[i] = input_dev = input_allocate_device(); + if (!input_dev) { + err = -ENOMEM; + goto fail3; + } - cobra->dev[i].name = cobra_name; - cobra->dev[i].phys = cobra->phys[i]; - cobra->dev[i].id.bustype = BUS_GAMEPORT; - cobra->dev[i].id.vendor = GAMEPORT_ID_VENDOR_CREATIVE; - cobra->dev[i].id.product = 0x0008; - cobra->dev[i].id.version = 0x0100; + sprintf(cobra->phys[i], "%s/input%d", gameport->phys, i); - cobra->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->name = "Creative Labs Blaster GamePad Cobra"; + input_dev->phys = cobra->phys[i]; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_CREATIVE; + input_dev->id.product = 0x0008; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = cobra; - input_set_abs_params(&cobra->dev[i], ABS_X, -1, 1, 0, 0); - input_set_abs_params(&cobra->dev[i], ABS_Y, -1, 1, 0, 0); + input_dev->open = cobra_open; + input_dev->close = cobra_close; - for (j = 0; cobra_btn[j]; j++) - set_bit(cobra_btn[j], cobra->dev[i].keybit); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0); + for (j = 0; cobra_btn[j]; j++) + set_bit(cobra_btn[j], input_dev->keybit); - input_register_device(&cobra->dev[i]); - printk(KERN_INFO "input: %s on %s\n", cobra_name, gameport->phys); - } + input_register_device(cobra->dev[i]); + } return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail3: for (i = 0; i < 2; i++) + if (cobra->dev[i]) + input_unregister_device(cobra->dev[i]); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); kfree(cobra); return err; } @@ -234,7 +242,7 @@ static void cobra_disconnect(struct gameport *gameport) for (i = 0; i < 2; i++) if ((cobra->exists >> i) & 1) - input_unregister_device(cobra->dev + i); + input_unregister_device(cobra->dev[i]); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(cobra); diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c index 2a3e4bb2da50..499344c72756 100644 --- a/drivers/input/joystick/db9.c +++ b/drivers/input/joystick/db9.c @@ -43,25 +43,28 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("Atari, Amstrad, Commodore, Amiga, Sega, etc. joystick driver"); MODULE_LICENSE("GPL"); -static int db9[] __initdata = { -1, 0 }; -static int db9_nargs __initdata = 0; -module_param_array_named(dev, db9, int, &db9_nargs, 0); -MODULE_PARM_DESC(dev, "Describes first attached device (,)"); +struct db9_config { + int args[2]; + int nargs; +}; -static int db9_2[] __initdata = { -1, 0 }; -static int db9_nargs_2 __initdata = 0; -module_param_array_named(dev2, db9_2, int, &db9_nargs_2, 0); -MODULE_PARM_DESC(dev2, "Describes second attached device (,)"); +#define DB9_MAX_PORTS 3 +static struct db9_config db9[DB9_MAX_PORTS] __initdata; -static int db9_3[] __initdata = { -1, 0 }; -static int db9_nargs_3 __initdata = 0; -module_param_array_named(dev3, db9_3, int, &db9_nargs_3, 0); +module_param_array_named(dev, db9[0].args, int, &db9[0].nargs, 0); +MODULE_PARM_DESC(dev, "Describes first attached device (,)"); +module_param_array_named(dev2, db9[1].args, int, &db9[0].nargs, 0); +MODULE_PARM_DESC(dev2, "Describes second attached device (,)"); +module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0); MODULE_PARM_DESC(dev3, "Describes third attached device (,)"); __obsolete_setup("db9="); __obsolete_setup("db9_2="); __obsolete_setup("db9_3="); +#define DB9_ARG_PARPORT 0 +#define DB9_ARG_MODE 1 + #define DB9_MULTI_STICK 0x01 #define DB9_MULTI2_STICK 0x02 #define DB9_GENESIS_PAD 0x03 @@ -87,40 +90,53 @@ __obsolete_setup("db9_3="); #define DB9_NORMAL 0x0a #define DB9_NOSELECT 0x08 -#define DB9_MAX_DEVICES 2 - #define DB9_GENESIS6_DELAY 14 #define DB9_REFRESH_TIME HZ/100 +#define DB9_MAX_DEVICES 2 + +struct db9_mode_data { + const char *name; + const short *buttons; + int n_buttons; + int n_pads; + int n_axis; + int bidirectional; + int reverse; +}; + struct db9 { - struct input_dev dev[DB9_MAX_DEVICES]; + struct input_dev *dev[DB9_MAX_DEVICES]; struct timer_list timer; struct pardevice *pd; int mode; int used; struct semaphore sem; - char phys[2][32]; + char phys[DB9_MAX_DEVICES][32]; }; static struct db9 *db9_base[3]; -static short db9_multi_btn[] = { BTN_TRIGGER, BTN_THUMB }; -static short db9_genesis_btn[] = { BTN_START, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_MODE }; -static short db9_cd32_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START }; - -static char db9_buttons[DB9_MAX_PAD] = { 0, 1, 2, 4, 0, 6, 8, 9, 1, 1, 7, 9, 9 }; -static short *db9_btn[DB9_MAX_PAD] = { NULL, db9_multi_btn, db9_multi_btn, db9_genesis_btn, NULL, db9_genesis_btn, - db9_genesis_btn, db9_cd32_btn, db9_multi_btn, db9_multi_btn, db9_cd32_btn, - db9_cd32_btn, db9_cd32_btn }; -static char *db9_name[DB9_MAX_PAD] = { NULL, "Multisystem joystick", "Multisystem joystick (2 fire)", "Genesis pad", - NULL, "Genesis 5 pad", "Genesis 6 pad", "Saturn pad", "Multisystem (0.8.0.2) joystick", - "Multisystem (0.8.0.2-dual) joystick", "Amiga CD-32 pad", "Saturn dpp", "Saturn dpp dual" }; - -static const int db9_max_pads[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 6, 1, 2, 1, 6, 12 }; -static const int db9_num_axis[DB9_MAX_PAD] = { 0, 2, 2, 2, 0, 2, 2, 7, 2, 2, 2 ,7, 7 }; +static const short db9_multi_btn[] = { BTN_TRIGGER, BTN_THUMB }; +static const short db9_genesis_btn[] = { BTN_START, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_MODE }; +static const short db9_cd32_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START }; static const short db9_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_RZ, ABS_Z, ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y }; -static const int db9_bidirectional[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 0, 0 }; -static const int db9_reverse[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 0, 0 }; + +static const struct db9_mode_data db9_modes[] = { + { NULL, NULL, 0, 0, 0, 0, 0 }, + { "Multisystem joystick", db9_multi_btn, 1, 1, 2, 1, 1 }, + { "Multisystem joystick (2 fire)", db9_multi_btn, 2, 1, 2, 1, 1 }, + { "Genesis pad", db9_genesis_btn, 4, 1, 2, 1, 1 }, + { NULL, NULL, 0, 0, 0, 0, 0 }, + { "Genesis 5 pad", db9_genesis_btn, 6, 1, 2, 1, 1 }, + { "Genesis 6 pad", db9_genesis_btn, 8, 1, 2, 1, 1 }, + { "Saturn pad", db9_cd32_btn, 9, 6, 7, 0, 1 }, + { "Multisystem (0.8.0.2) joystick", db9_multi_btn, 1, 1, 2, 1, 1 }, + { "Multisystem (0.8.0.2-dual) joystick", db9_multi_btn, 1, 2, 2, 1, 1 }, + { "Amiga CD-32 pad", db9_cd32_btn, 7, 1, 2, 1, 1 }, + { "Saturn dpp", db9_cd32_btn, 9, 6, 7, 0, 0 }, + { "Saturn dpp dual", db9_cd32_btn, 9, 12, 7, 0, 0 }, +}; /* * Saturn controllers @@ -342,7 +358,7 @@ static int db9_saturn(int mode, struct parport *port, struct input_dev *dev) default: return -1; } - max_pads = min(db9_max_pads[mode], DB9_MAX_DEVICES); + max_pads = min(db9_modes[mode].n_pads, DB9_MAX_DEVICES); for (tmp = 0, i = 0; i < n; i++) { id = db9_saturn_read_packet(port, data, type + i, 1); tmp = db9_saturn_report(id, data, dev, tmp, max_pads); @@ -354,17 +370,18 @@ static void db9_timer(unsigned long private) { struct db9 *db9 = (void *) private; struct parport *port = db9->pd->port; - struct input_dev *dev = db9->dev; + struct input_dev *dev = db9->dev[0]; + struct input_dev *dev2 = db9->dev[1]; int data, i; - switch(db9->mode) { + switch (db9->mode) { case DB9_MULTI_0802_2: data = parport_read_data(port) >> 3; - input_report_abs(dev + 1, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); - input_report_abs(dev + 1, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); - input_report_key(dev + 1, BTN_TRIGGER, ~data & DB9_FIRE1); + input_report_abs(dev2, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); + input_report_abs(dev2, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); + input_report_key(dev2, BTN_TRIGGER, ~data & DB9_FIRE1); case DB9_MULTI_0802: @@ -405,7 +422,7 @@ static void db9_timer(unsigned long private) input_report_key(dev, BTN_C, ~data & DB9_FIRE2); parport_write_control(port, DB9_NORMAL); - data=parport_read_data(port); + data = parport_read_data(port); input_report_key(dev, BTN_A, ~data & DB9_FIRE1); input_report_key(dev, BTN_START, ~data & DB9_FIRE2); @@ -414,7 +431,7 @@ static void db9_timer(unsigned long private) case DB9_GENESIS5_PAD: parport_write_control(port, DB9_NOSELECT); - data=parport_read_data(port); + data = parport_read_data(port); input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); @@ -422,7 +439,7 @@ static void db9_timer(unsigned long private) input_report_key(dev, BTN_C, ~data & DB9_FIRE2); parport_write_control(port, DB9_NORMAL); - data=parport_read_data(port); + data = parport_read_data(port); input_report_key(dev, BTN_A, ~data & DB9_FIRE1); input_report_key(dev, BTN_X, ~data & DB9_FIRE2); @@ -434,7 +451,7 @@ static void db9_timer(unsigned long private) parport_write_control(port, DB9_NOSELECT); /* 1 */ udelay(DB9_GENESIS6_DELAY); - data=parport_read_data(port); + data = parport_read_data(port); input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); @@ -443,7 +460,7 @@ static void db9_timer(unsigned long private) parport_write_control(port, DB9_NORMAL); udelay(DB9_GENESIS6_DELAY); - data=parport_read_data(port); + data = parport_read_data(port); input_report_key(dev, BTN_A, ~data & DB9_FIRE1); input_report_key(dev, BTN_START, ~data & DB9_FIRE2); @@ -477,7 +494,7 @@ static void db9_timer(unsigned long private) case DB9_CD32_PAD: - data=parport_read_data(port); + data = parport_read_data(port); input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1)); input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1)); @@ -489,7 +506,7 @@ static void db9_timer(unsigned long private) parport_write_control(port, 0x02); parport_write_control(port, 0x0a); input_report_key(dev, db9_cd32_btn[i], ~data & DB9_FIRE2); - } + } parport_write_control(port, 0x00); break; @@ -513,7 +530,7 @@ static int db9_open(struct input_dev *dev) if (!db9->used++) { parport_claim(db9->pd); parport_write_data(port, 0xff); - if (db9_reverse[db9->mode]) { + if (db9_modes[db9->mode].reverse) { parport_data_reverse(port); parport_write_control(port, DB9_NORMAL); } @@ -539,117 +556,160 @@ static void db9_close(struct input_dev *dev) up(&db9->sem); } -static struct db9 __init *db9_probe(int *config, int nargs) +static struct db9 __init *db9_probe(int parport, int mode) { struct db9 *db9; + const struct db9_mode_data *db9_mode; struct parport *pp; + struct pardevice *pd; + struct input_dev *input_dev; int i, j; + int err; - if (config[0] < 0) - return NULL; - - if (nargs < 2) { - printk(KERN_ERR "db9.c: Device type must be specified.\n"); - return NULL; + if (mode < 1 || mode >= DB9_MAX_PAD || !db9_modes[mode].n_buttons) { + printk(KERN_ERR "db9.c: Bad device type %d\n", mode); + err = -EINVAL; + goto err_out; } - if (config[1] < 1 || config[1] >= DB9_MAX_PAD || !db9_buttons[config[1]]) { - printk(KERN_ERR "db9.c: bad config\n"); - return NULL; - } + db9_mode = &db9_modes[mode]; - pp = parport_find_number(config[0]); + pp = parport_find_number(parport); if (!pp) { printk(KERN_ERR "db9.c: no such parport\n"); - return NULL; + err = -ENODEV; + goto err_out; } - if (db9_bidirectional[config[1]]) { - if (!(pp->modes & PARPORT_MODE_TRISTATE)) { - printk(KERN_ERR "db9.c: specified parport is not bidirectional\n"); - parport_put_port(pp); - return NULL; - } + if (db9_mode[mode].bidirectional && !(pp->modes & PARPORT_MODE_TRISTATE)) { + printk(KERN_ERR "db9.c: specified parport is not bidirectional\n"); + err = -EINVAL; + goto err_put_pp; + } + + pd = parport_register_device(pp, "db9", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); + if (!pd) { + printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n"); + err = -EBUSY; + goto err_put_pp; } - if (!(db9 = kzalloc(sizeof(struct db9), GFP_KERNEL))) { - parport_put_port(pp); - return NULL; + db9 = kzalloc(sizeof(struct db9), GFP_KERNEL); + if (!db9) { + printk(KERN_ERR "db9.c: Not enough memory\n"); + err = -ENOMEM; + goto err_unreg_pardev; } init_MUTEX(&db9->sem); - db9->mode = config[1]; + db9->pd = pd; + db9->mode = mode; init_timer(&db9->timer); db9->timer.data = (long) db9; db9->timer.function = db9_timer; - db9->pd = parport_register_device(pp, "db9", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); - parport_put_port(pp); - - if (!db9->pd) { - printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n"); - kfree(db9); - return NULL; - } + for (i = 0; i < (min(db9_mode->n_pads, DB9_MAX_DEVICES)); i++) { - for (i = 0; i < (min(db9_max_pads[db9->mode], DB9_MAX_DEVICES)); i++) { + db9->dev[i] = input_dev = input_allocate_device(); + if (!input_dev) { + printk(KERN_ERR "db9.c: Not enough memory for input device\n"); + err = -ENOMEM; + goto err_free_devs; + } sprintf(db9->phys[i], "%s/input%d", db9->pd->port->name, i); - db9->dev[i].private = db9; - db9->dev[i].open = db9_open; - db9->dev[i].close = db9_close; - - db9->dev[i].name = db9_name[db9->mode]; - db9->dev[i].phys = db9->phys[i]; - db9->dev[i].id.bustype = BUS_PARPORT; - db9->dev[i].id.vendor = 0x0002; - db9->dev[i].id.product = config[1]; - db9->dev[i].id.version = 0x0100; - - db9->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - for (j = 0; j < db9_buttons[db9->mode]; j++) - set_bit(db9_btn[db9->mode][j], db9->dev[i].keybit); - for (j = 0; j < db9_num_axis[db9->mode]; j++) { - set_bit(db9_abs[j], db9->dev[i].absbit); - if (j < 2) { - db9->dev[i].absmin[db9_abs[j]] = -1; - db9->dev[i].absmax[db9_abs[j]] = 1; - } else { - db9->dev[i].absmin[db9_abs[j]] = 1; - db9->dev[i].absmax[db9_abs[j]] = 255; - db9->dev[i].absflat[db9_abs[j]] = 0; - } + input_dev->name = db9_mode->name; + input_dev->phys = db9->phys[i]; + input_dev->id.bustype = BUS_PARPORT; + input_dev->id.vendor = 0x0002; + input_dev->id.product = mode; + input_dev->id.version = 0x0100; + input_dev->private = db9; + + input_dev->open = db9_open; + input_dev->close = db9_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + for (j = 0; j < db9_mode->n_buttons; j++) + set_bit(db9_mode->buttons[j], input_dev->keybit); + for (j = 0; j < db9_mode->n_axis; j++) { + if (j < 2) + input_set_abs_params(input_dev, db9_abs[j], -1, 1, 0, 0); + else + input_set_abs_params(input_dev, db9_abs[j], 1, 255, 0, 0); } - input_register_device(db9->dev + i); - printk(KERN_INFO "input: %s on %s\n", db9->dev[i].name, db9->pd->port->name); + + input_register_device(input_dev); } + parport_put_port(pp); return db9; + + err_free_devs: + while (--i >= 0) + input_unregister_device(db9->dev[i]); + kfree(db9); + err_unreg_pardev: + parport_unregister_device(pd); + err_put_pp: + parport_put_port(pp); + err_out: + return ERR_PTR(err); +} + +static void __exit db9_remove(struct db9 *db9) +{ + int i; + + for (i = 0; i < min(db9_modes[db9->mode].n_pads, DB9_MAX_DEVICES); i++) + input_unregister_device(db9->dev[i]); + parport_unregister_device(db9->pd); + kfree(db9); } static int __init db9_init(void) { - db9_base[0] = db9_probe(db9, db9_nargs); - db9_base[1] = db9_probe(db9_2, db9_nargs_2); - db9_base[2] = db9_probe(db9_3, db9_nargs_3); + int i; + int have_dev = 0; + int err = 0; + + for (i = 0; i < DB9_MAX_PORTS; i++) { + if (db9[i].nargs == 0 || db9[i].args[DB9_ARG_PARPORT] < 0) + continue; + + if (db9[i].nargs < 2) { + printk(KERN_ERR "db9.c: Device type must be specified.\n"); + err = -EINVAL; + break; + } + + db9_base[i] = db9_probe(db9[i].args[DB9_ARG_PARPORT], + db9[i].args[DB9_ARG_MODE]); + if (IS_ERR(db9_base[i])) { + err = PTR_ERR(db9_base[i]); + break; + } + + have_dev = 1; + } - if (db9_base[0] || db9_base[1] || db9_base[2]) - return 0; + if (err) { + while (--i >= 0) + db9_remove(db9_base[i]); + return err; + } - return -ENODEV; + return have_dev ? 0 : -ENODEV; } static void __exit db9_exit(void) { - int i, j; + int i; - for (i = 0; i < 3; i++) - if (db9_base[i]) { - for (j = 0; j < min(db9_max_pads[db9_base[i]->mode], DB9_MAX_DEVICES); j++) - input_unregister_device(db9_base[i]->dev + j); - parport_unregister_device(db9_base[i]->pd); - } + for (i = 0; i < DB9_MAX_PORTS; i++) + if (db9_base[i]) + db9_remove(db9_base[i]); } module_init(db9_init); diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index 5427bf9fc862..7df2d82f2c83 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -41,20 +41,22 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("NES, SNES, N64, MultiSystem, PSX gamepad driver"); MODULE_LICENSE("GPL"); -static int gc[] __initdata = { -1, 0, 0, 0, 0, 0 }; -static int gc_nargs __initdata = 0; -module_param_array_named(map, gc, int, &gc_nargs, 0); -MODULE_PARM_DESC(map, "Describers first set of devices (,,,..)"); +#define GC_MAX_PORTS 3 +#define GC_MAX_DEVICES 5 -static int gc_2[] __initdata = { -1, 0, 0, 0, 0, 0 }; -static int gc_nargs_2 __initdata = 0; -module_param_array_named(map2, gc_2, int, &gc_nargs_2, 0); -MODULE_PARM_DESC(map2, "Describers second set of devices"); +struct gc_config { + int args[GC_MAX_DEVICES + 1]; + int nargs; +}; + +static struct gc_config gc[GC_MAX_PORTS] __initdata; -static int gc_3[] __initdata = { -1, 0, 0, 0, 0, 0 }; -static int gc_nargs_3 __initdata = 0; -module_param_array_named(map3, gc_3, int, &gc_nargs_3, 0); -MODULE_PARM_DESC(map3, "Describers third set of devices"); +module_param_array_named(map, gc[0].args, int, &gc[0].nargs, 0); +MODULE_PARM_DESC(map, "Describes first set of devices (,,,..)"); +module_param_array_named(map2, gc[1].args, int, &gc[1].nargs, 0); +MODULE_PARM_DESC(map2, "Describes second set of devices"); +module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0); +MODULE_PARM_DESC(map3, "Describes third set of devices"); __obsolete_setup("gc="); __obsolete_setup("gc_2="); @@ -77,12 +79,12 @@ __obsolete_setup("gc_3="); struct gc { struct pardevice *pd; - struct input_dev dev[5]; + struct input_dev *dev[GC_MAX_DEVICES]; struct timer_list timer; unsigned char pads[GC_MAX + 1]; int used; struct semaphore sem; - char phys[5][32]; + char phys[GC_MAX_DEVICES][32]; }; static struct gc *gc_base[3]; @@ -330,7 +332,6 @@ static void gc_psx_read_packet(struct gc *gc, unsigned char data[5][GC_PSX_BYTES static void gc_timer(unsigned long private) { struct gc *gc = (void *) private; - struct input_dev *dev = gc->dev; unsigned char data[GC_MAX_LENGTH]; unsigned char data_psx[5][GC_PSX_BYTES]; int i, j, s; @@ -357,16 +358,16 @@ static void gc_timer(unsigned long private) if (data[31 - j] & s) axes[1] |= 1 << j; } - input_report_abs(dev + i, ABS_X, axes[0]); - input_report_abs(dev + i, ABS_Y, -axes[1]); + input_report_abs(gc->dev[i], ABS_X, axes[0]); + input_report_abs(gc->dev[i], ABS_Y, -axes[1]); - input_report_abs(dev + i, ABS_HAT0X, !(s & data[6]) - !(s & data[7])); - input_report_abs(dev + i, ABS_HAT0Y, !(s & data[4]) - !(s & data[5])); + input_report_abs(gc->dev[i], ABS_HAT0X, !(s & data[6]) - !(s & data[7])); + input_report_abs(gc->dev[i], ABS_HAT0Y, !(s & data[4]) - !(s & data[5])); for (j = 0; j < 10; j++) - input_report_key(dev + i, gc_n64_btn[j], s & data[gc_n64_bytes[j]]); + input_report_key(gc->dev[i], gc_n64_btn[j], s & data[gc_n64_bytes[j]]); - input_sync(dev + i); + input_sync(gc->dev[i]); } } } @@ -384,19 +385,19 @@ static void gc_timer(unsigned long private) s = gc_status_bit[i]; if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) { - input_report_abs(dev + i, ABS_X, !(s & data[6]) - !(s & data[7])); - input_report_abs(dev + i, ABS_Y, !(s & data[4]) - !(s & data[5])); + input_report_abs(gc->dev[i], ABS_X, !(s & data[6]) - !(s & data[7])); + input_report_abs(gc->dev[i], ABS_Y, !(s & data[4]) - !(s & data[5])); } if (s & gc->pads[GC_NES]) for (j = 0; j < 4; j++) - input_report_key(dev + i, gc_snes_btn[j], s & data[gc_nes_bytes[j]]); + input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_nes_bytes[j]]); if (s & gc->pads[GC_SNES]) for (j = 0; j < 8; j++) - input_report_key(dev + i, gc_snes_btn[j], s & data[gc_snes_bytes[j]]); + input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_snes_bytes[j]]); - input_sync(dev + i); + input_sync(gc->dev[i]); } } @@ -413,15 +414,15 @@ static void gc_timer(unsigned long private) s = gc_status_bit[i]; if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) { - input_report_abs(dev + i, ABS_X, !(s & data[2]) - !(s & data[3])); - input_report_abs(dev + i, ABS_Y, !(s & data[0]) - !(s & data[1])); - input_report_key(dev + i, BTN_TRIGGER, s & data[4]); + input_report_abs(gc->dev[i], ABS_X, !(s & data[2]) - !(s & data[3])); + input_report_abs(gc->dev[i], ABS_Y, !(s & data[0]) - !(s & data[1])); + input_report_key(gc->dev[i], BTN_TRIGGER, s & data[4]); } if (s & gc->pads[GC_MULTI2]) - input_report_key(dev + i, BTN_THUMB, s & data[5]); + input_report_key(gc->dev[i], BTN_THUMB, s & data[5]); - input_sync(dev + i); + input_sync(gc->dev[i]); } } @@ -438,44 +439,44 @@ static void gc_timer(unsigned long private) case GC_PSX_RUMBLE: - input_report_key(dev + i, BTN_THUMBL, ~data_psx[i][0] & 0x04); - input_report_key(dev + i, BTN_THUMBR, ~data_psx[i][0] & 0x02); + input_report_key(gc->dev[i], BTN_THUMBL, ~data_psx[i][0] & 0x04); + input_report_key(gc->dev[i], BTN_THUMBR, ~data_psx[i][0] & 0x02); case GC_PSX_NEGCON: case GC_PSX_ANALOG: - if(gc->pads[GC_DDR] & gc_status_bit[i]) { + if (gc->pads[GC_DDR] & gc_status_bit[i]) { for(j = 0; j < 4; j++) - input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); + input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); } else { for (j = 0; j < 4; j++) - input_report_abs(dev + i, gc_psx_abs[j+2], data_psx[i][j + 2]); + input_report_abs(gc->dev[i], gc_psx_abs[j+2], data_psx[i][j + 2]); - input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); - input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); + input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); + input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); } for (j = 0; j < 8; j++) - input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); + input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); - input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08); - input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01); + input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08); + input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01); - input_sync(dev + i); + input_sync(gc->dev[i]); break; case GC_PSX_NORMAL: - if(gc->pads[GC_DDR] & gc_status_bit[i]) { + if (gc->pads[GC_DDR] & gc_status_bit[i]) { for(j = 0; j < 4; j++) - input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); + input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j)); } else { - input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); - input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); + input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128); + input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128); /* for some reason if the extra axes are left unset they drift */ /* for (j = 0; j < 4; j++) - input_report_abs(dev + i, gc_psx_abs[j+2], 128); + input_report_abs(gc->dev[i], gc_psx_abs[j+2], 128); * This needs to be debugged properly, * maybe fuzz processing needs to be done in input_sync() * --vojtech @@ -483,12 +484,12 @@ static void gc_timer(unsigned long private) } for (j = 0; j < 8; j++) - input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); + input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j)); - input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08); - input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01); + input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08); + input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01); - input_sync(dev + i); + input_sync(gc->dev[i]); break; @@ -533,177 +534,212 @@ static void gc_close(struct input_dev *dev) up(&gc->sem); } -static struct gc __init *gc_probe(int *config, int nargs) +static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type) { - struct gc *gc; - struct parport *pp; - int i, j; + struct input_dev *input_dev; + int i; - if (config[0] < 0) - return NULL; + if (!pad_type) + return 0; - if (nargs < 2) { - printk(KERN_ERR "gamecon.c: at least one device must be specified\n"); - return NULL; + if (pad_type < 1 || pad_type > GC_MAX) { + printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", pad_type); + return -EINVAL; } - pp = parport_find_number(config[0]); - - if (!pp) { - printk(KERN_ERR "gamecon.c: no such parport\n"); - return NULL; + gc->dev[idx] = input_dev = input_allocate_device(); + if (!input_dev) { + printk(KERN_ERR "gamecon.c: Not enough memory for input device\n"); + return -ENOMEM; } - if (!(gc = kzalloc(sizeof(struct gc), GFP_KERNEL))) { - parport_put_port(pp); - return NULL; + input_dev->name = gc_names[pad_type]; + input_dev->phys = gc->phys[idx]; + input_dev->id.bustype = BUS_PARPORT; + input_dev->id.vendor = 0x0001; + input_dev->id.product = pad_type; + input_dev->id.version = 0x0100; + input_dev->private = gc; + + input_dev->open = gc_open; + input_dev->close = gc_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + + for (i = 0; i < 2; i++) + input_set_abs_params(input_dev, ABS_X + i, -1, 1, 0, 0); + + gc->pads[0] |= gc_status_bit[idx]; + gc->pads[pad_type] |= gc_status_bit[idx]; + + switch (pad_type) { + + case GC_N64: + for (i = 0; i < 10; i++) + set_bit(gc_n64_btn[i], input_dev->keybit); + + for (i = 0; i < 2; i++) { + input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2); + input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0); + } + + break; + + case GC_SNES: + for (i = 4; i < 8; i++) + set_bit(gc_snes_btn[i], input_dev->keybit); + case GC_NES: + for (i = 0; i < 4; i++) + set_bit(gc_snes_btn[i], input_dev->keybit); + break; + + case GC_MULTI2: + set_bit(BTN_THUMB, input_dev->keybit); + case GC_MULTI: + set_bit(BTN_TRIGGER, input_dev->keybit); + break; + + case GC_PSX: + for (i = 0; i < 6; i++) + input_set_abs_params(input_dev, gc_psx_abs[i], 4, 252, 0, 2); + for (i = 0; i < 12; i++) + set_bit(gc_psx_btn[i], input_dev->keybit); + + break; + + case GC_DDR: + for (i = 0; i < 4; i++) + set_bit(gc_psx_ddr_btn[i], input_dev->keybit); + for (i = 0; i < 12; i++) + set_bit(gc_psx_btn[i], input_dev->keybit); + + break; } - init_MUTEX(&gc->sem); + return 0; +} - gc->pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); +static struct gc __init *gc_probe(int parport, int *pads, int n_pads) +{ + struct gc *gc; + struct parport *pp; + struct pardevice *pd; + int i; + int err; - parport_put_port(pp); + pp = parport_find_number(parport); + if (!pp) { + printk(KERN_ERR "gamecon.c: no such parport\n"); + err = -EINVAL; + goto err_out; + } - if (!gc->pd) { + pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); + if (!pd) { printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n"); - kfree(gc); - return NULL; + err = -EBUSY; + goto err_put_pp; } - parport_claim(gc->pd); + gc = kzalloc(sizeof(struct gc), GFP_KERNEL); + if (!gc) { + printk(KERN_ERR "gamecon.c: Not enough memory\n"); + err = -ENOMEM; + goto err_unreg_pardev; + } + init_MUTEX(&gc->sem); + gc->pd = pd; init_timer(&gc->timer); gc->timer.data = (long) gc; gc->timer.function = gc_timer; - for (i = 0; i < nargs - 1; i++) { - - if (!config[i + 1]) + for (i = 0; i < n_pads; i++) { + if (!pads[i]) continue; - if (config[i + 1] < 1 || config[i + 1] > GC_MAX) { - printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", config[i + 1]); - continue; - } - - gc->dev[i].private = gc; - gc->dev[i].open = gc_open; - gc->dev[i].close = gc_close; + sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i); + err = gc_setup_pad(gc, i, pads[i]); + if (err) + goto err_free_devs; - gc->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_register_device(gc->dev[i]); + } - for (j = 0; j < 2; j++) { - set_bit(ABS_X + j, gc->dev[i].absbit); - gc->dev[i].absmin[ABS_X + j] = -1; - gc->dev[i].absmax[ABS_X + j] = 1; - } + if (!gc->pads[0]) { + printk(KERN_ERR "gamecon.c: No valid devices specified\n"); + err = -EINVAL; + goto err_free_gc; + } - gc->pads[0] |= gc_status_bit[i]; - gc->pads[config[i + 1]] |= gc_status_bit[i]; + parport_put_port(pp); + return gc; - switch(config[i + 1]) { + err_free_devs: + while (--i >= 0) + input_unregister_device(gc->dev[i]); + err_free_gc: + kfree(gc); + err_unreg_pardev: + parport_unregister_device(pd); + err_put_pp: + parport_put_port(pp); + err_out: + return ERR_PTR(err); +} - case GC_N64: - for (j = 0; j < 10; j++) - set_bit(gc_n64_btn[j], gc->dev[i].keybit); - - for (j = 0; j < 2; j++) { - set_bit(ABS_X + j, gc->dev[i].absbit); - gc->dev[i].absmin[ABS_X + j] = -127; - gc->dev[i].absmax[ABS_X + j] = 126; - gc->dev[i].absflat[ABS_X + j] = 2; - set_bit(ABS_HAT0X + j, gc->dev[i].absbit); - gc->dev[i].absmin[ABS_HAT0X + j] = -1; - gc->dev[i].absmax[ABS_HAT0X + j] = 1; - } +static void __exit gc_remove(struct gc *gc) +{ + int i; - break; + for (i = 0; i < GC_MAX_DEVICES; i++) + if (gc->dev[i]) + input_unregister_device(gc->dev[i]); + parport_unregister_device(gc->pd); + kfree(gc); +} - case GC_SNES: - for (j = 4; j < 8; j++) - set_bit(gc_snes_btn[j], gc->dev[i].keybit); - case GC_NES: - for (j = 0; j < 4; j++) - set_bit(gc_snes_btn[j], gc->dev[i].keybit); - break; - - case GC_MULTI2: - set_bit(BTN_THUMB, gc->dev[i].keybit); - case GC_MULTI: - set_bit(BTN_TRIGGER, gc->dev[i].keybit); - break; - - case GC_PSX: - case GC_DDR: - if(config[i + 1] == GC_DDR) { - for (j = 0; j < 4; j++) - set_bit(gc_psx_ddr_btn[j], gc->dev[i].keybit); - } else { - for (j = 0; j < 6; j++) { - set_bit(gc_psx_abs[j], gc->dev[i].absbit); - gc->dev[i].absmin[gc_psx_abs[j]] = 4; - gc->dev[i].absmax[gc_psx_abs[j]] = 252; - gc->dev[i].absflat[gc_psx_abs[j]] = 2; - } - } +static int __init gc_init(void) +{ + int i; + int have_dev = 0; + int err = 0; - for (j = 0; j < 12; j++) - set_bit(gc_psx_btn[j], gc->dev[i].keybit); + for (i = 0; i < GC_MAX_PORTS; i++) { + if (gc[i].nargs == 0 || gc[i].args[0] < 0) + continue; - break; + if (gc[i].nargs < 2) { + printk(KERN_ERR "gamecon.c: at least one device must be specified\n"); + err = -EINVAL; + break; } - sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i); + gc_base[i] = gc_probe(gc[i].args[0], gc[i].args + 1, gc[i].nargs - 1); + if (IS_ERR(gc_base[i])) { + err = PTR_ERR(gc_base[i]); + break; + } - gc->dev[i].name = gc_names[config[i + 1]]; - gc->dev[i].phys = gc->phys[i]; - gc->dev[i].id.bustype = BUS_PARPORT; - gc->dev[i].id.vendor = 0x0001; - gc->dev[i].id.product = config[i + 1]; - gc->dev[i].id.version = 0x0100; + have_dev = 1; } - parport_release(gc->pd); - - if (!gc->pads[0]) { - parport_unregister_device(gc->pd); - kfree(gc); - return NULL; + if (err) { + while (--i >= 0) + gc_remove(gc_base[i]); + return err; } - for (i = 0; i < 5; i++) - if (gc->pads[0] & gc_status_bit[i]) { - input_register_device(gc->dev + i); - printk(KERN_INFO "input: %s on %s\n", gc->dev[i].name, gc->pd->port->name); - } - - return gc; -} - -static int __init gc_init(void) -{ - gc_base[0] = gc_probe(gc, gc_nargs); - gc_base[1] = gc_probe(gc_2, gc_nargs_2); - gc_base[2] = gc_probe(gc_3, gc_nargs_3); - - if (gc_base[0] || gc_base[1] || gc_base[2]) - return 0; - - return -ENODEV; + return have_dev ? 0 : -ENODEV; } static void __exit gc_exit(void) { - int i, j; - - for (i = 0; i < 3; i++) - if (gc_base[i]) { - for (j = 0; j < 5; j++) - if (gc_base[i]->pads[0] & gc_status_bit[j]) - input_unregister_device(gc_base[i]->dev + j); - parport_unregister_device(gc_base[i]->pd); - } + int i; + + for (i = 0; i < GC_MAX_PORTS; i++) + if (gc_base[i]) + gc_remove(gc_base[i]); } module_init(gc_init); diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c index 8e4f92b115e6..e151f8c5bcb9 100644 --- a/drivers/input/joystick/gf2k.c +++ b/drivers/input/joystick/gf2k.c @@ -81,7 +81,7 @@ static short gf2k_seq_digital[] = { 590, 320, 860, 0 }; struct gf2k { struct gameport *gameport; - struct input_dev dev; + struct input_dev *dev; int reads; int bads; unsigned char id; @@ -175,7 +175,7 @@ static int gf2k_get_bits(unsigned char *buf, int pos, int num, int shift) static void gf2k_read(struct gf2k *gf2k, unsigned char *data) { - struct input_dev *dev = &gf2k->dev; + struct input_dev *dev = gf2k->dev; int i, t; for (i = 0; i < 4 && i < gf2k_axes[gf2k->id]; i++) @@ -239,13 +239,19 @@ static void gf2k_close(struct input_dev *dev) static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) { struct gf2k *gf2k; + struct input_dev *input_dev; unsigned char data[GF2K_LENGTH]; int i, err; - if (!(gf2k = kzalloc(sizeof(struct gf2k), GFP_KERNEL))) - return -ENOMEM; + gf2k = kzalloc(sizeof(struct gf2k), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!gf2k || !input_dev) { + err = -ENOMEM; + goto fail1; + } gf2k->gameport = gameport; + gf2k->dev = input_dev; gameport_set_drvdata(gameport, gf2k); @@ -295,53 +301,52 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) gf2k->length = gf2k_lens[gf2k->id]; - init_input_dev(&gf2k->dev); - - gf2k->dev.private = gf2k; - gf2k->dev.open = gf2k_open; - gf2k->dev.close = gf2k_close; - gf2k->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->name = gf2k_names[gf2k->id]; + input_dev->phys = gf2k->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_GENIUS; + input_dev->id.product = gf2k->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = gf2k; - gf2k->dev.name = gf2k_names[gf2k->id]; - gf2k->dev.phys = gf2k->phys; - gf2k->dev.id.bustype = BUS_GAMEPORT; - gf2k->dev.id.vendor = GAMEPORT_ID_VENDOR_GENIUS; - gf2k->dev.id.product = gf2k->id; - gf2k->dev.id.version = 0x0100; + input_dev->open = gf2k_open; + input_dev->close = gf2k_close; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; i < gf2k_axes[gf2k->id]; i++) - set_bit(gf2k_abs[i], gf2k->dev.absbit); + set_bit(gf2k_abs[i], input_dev->absbit); for (i = 0; i < gf2k_hats[gf2k->id]; i++) { - set_bit(ABS_HAT0X + i, gf2k->dev.absbit); - gf2k->dev.absmin[ABS_HAT0X + i] = -1; - gf2k->dev.absmax[ABS_HAT0X + i] = 1; + set_bit(ABS_HAT0X + i, input_dev->absbit); + input_dev->absmin[ABS_HAT0X + i] = -1; + input_dev->absmax[ABS_HAT0X + i] = 1; } for (i = 0; i < gf2k_joys[gf2k->id]; i++) - set_bit(gf2k_btn_joy[i], gf2k->dev.keybit); + set_bit(gf2k_btn_joy[i], input_dev->keybit); for (i = 0; i < gf2k_pads[gf2k->id]; i++) - set_bit(gf2k_btn_pad[i], gf2k->dev.keybit); + set_bit(gf2k_btn_pad[i], input_dev->keybit); gf2k_read_packet(gameport, gf2k->length, data); gf2k_read(gf2k, data); for (i = 0; i < gf2k_axes[gf2k->id]; i++) { - gf2k->dev.absmax[gf2k_abs[i]] = (i < 2) ? gf2k->dev.abs[gf2k_abs[i]] * 2 - 32 : - gf2k->dev.abs[gf2k_abs[0]] + gf2k->dev.abs[gf2k_abs[1]] - 32; - gf2k->dev.absmin[gf2k_abs[i]] = 32; - gf2k->dev.absfuzz[gf2k_abs[i]] = 8; - gf2k->dev.absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0; + input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 : + input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32; + input_dev->absmin[gf2k_abs[i]] = 32; + input_dev->absfuzz[gf2k_abs[i]] = 8; + input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0; } - input_register_device(&gf2k->dev); - printk(KERN_INFO "input: %s on %s\n", gf2k_names[gf2k->id], gameport->phys); + input_register_device(gf2k->dev); return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); + input_free_device(input_dev); kfree(gf2k); return err; } @@ -350,7 +355,7 @@ static void gf2k_disconnect(struct gameport *gameport) { struct gf2k *gf2k = gameport_get_drvdata(gameport); - input_unregister_device(&gf2k->dev); + input_unregister_device(gf2k->dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(gf2k); diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c index 9d3f910dd568..e206bb56e53c 100644 --- a/drivers/input/joystick/grip.c +++ b/drivers/input/joystick/grip.c @@ -55,7 +55,7 @@ MODULE_LICENSE("GPL"); struct grip { struct gameport *gameport; - struct input_dev dev[2]; + struct input_dev *dev[2]; unsigned char mode[2]; int reads; int bads; @@ -190,7 +190,7 @@ static void grip_poll(struct gameport *gameport) for (i = 0; i < 2; i++) { - dev = grip->dev + i; + dev = grip->dev[i]; grip->reads++; switch (grip->mode[i]) { @@ -297,6 +297,7 @@ static void grip_close(struct input_dev *dev) static int grip_connect(struct gameport *gameport, struct gameport_driver *drv) { struct grip *grip; + struct input_dev *input_dev; unsigned int data[GRIP_LENGTH_XT]; int i, j, t; int err; @@ -339,48 +340,56 @@ static int grip_connect(struct gameport *gameport, struct gameport_driver *drv) gameport_set_poll_handler(gameport, grip_poll); gameport_set_poll_interval(gameport, 20); - for (i = 0; i < 2; i++) - if (grip->mode[i]) { + for (i = 0; i < 2; i++) { + if (!grip->mode[i]) + continue; - sprintf(grip->phys[i], "%s/input%d", gameport->phys, i); + grip->dev[i] = input_dev = input_allocate_device(); + if (!input_dev) { + err = -ENOMEM; + goto fail3; + } - grip->dev[i].private = grip; + sprintf(grip->phys[i], "%s/input%d", gameport->phys, i); - grip->dev[i].open = grip_open; - grip->dev[i].close = grip_close; + input_dev->name = grip_name[grip->mode[i]]; + input_dev->phys = grip->phys[i]; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_GRAVIS; + input_dev->id.product = grip->mode[i]; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = grip; - grip->dev[i].name = grip_name[grip->mode[i]]; - grip->dev[i].phys = grip->phys[i]; - grip->dev[i].id.bustype = BUS_GAMEPORT; - grip->dev[i].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS; - grip->dev[i].id.product = grip->mode[i]; - grip->dev[i].id.version = 0x0100; + input_dev->open = grip_open; + input_dev->close = grip_close; - grip->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - for (j = 0; (t = grip_abs[grip->mode[i]][j]) >= 0; j++) { + for (j = 0; (t = grip_abs[grip->mode[i]][j]) >= 0; j++) { - if (j < grip_cen[grip->mode[i]]) - input_set_abs_params(&grip->dev[i], t, 14, 52, 1, 2); - else if (j < grip_anx[grip->mode[i]]) - input_set_abs_params(&grip->dev[i], t, 3, 57, 1, 0); - else - input_set_abs_params(&grip->dev[i], t, -1, 1, 0, 0); - } + if (j < grip_cen[grip->mode[i]]) + input_set_abs_params(input_dev, t, 14, 52, 1, 2); + else if (j < grip_anx[grip->mode[i]]) + input_set_abs_params(input_dev, t, 3, 57, 1, 0); + else + input_set_abs_params(input_dev, t, -1, 1, 0, 0); + } - for (j = 0; (t = grip_btn[grip->mode[i]][j]) >= 0; j++) - if (t > 0) - set_bit(t, grip->dev[i].keybit); + for (j = 0; (t = grip_btn[grip->mode[i]][j]) >= 0; j++) + if (t > 0) + set_bit(t, input_dev->keybit); - printk(KERN_INFO "input: %s on %s\n", - grip_name[grip->mode[i]], gameport->phys); - input_register_device(grip->dev + i); - } + input_register_device(grip->dev[i]); + } return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail3: for (i = 0; i < 2; i++) + if (grip->dev[i]) + input_unregister_device(grip->dev[i]); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); kfree(grip); return err; } @@ -391,8 +400,8 @@ static void grip_disconnect(struct gameport *gameport) int i; for (i = 0; i < 2; i++) - if (grip->mode[i]) - input_unregister_device(grip->dev + i); + if (grip->dev[i]) + input_unregister_device(grip->dev[i]); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(grip); diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c index da17eee6f574..a0ba93ccac72 100644 --- a/drivers/input/joystick/grip_mp.c +++ b/drivers/input/joystick/grip_mp.c @@ -32,23 +32,37 @@ MODULE_LICENSE("GPL"); #define dbg(format, arg...) do {} while (0) #endif +#define GRIP_MAX_PORTS 4 /* * Grip multiport state */ +struct grip_port { + struct input_dev *dev; + int mode; + int registered; + + /* individual gamepad states */ + int buttons; + int xaxes; + int yaxes; + int dirty; /* has the state been updated? */ +}; + struct grip_mp { struct gameport *gameport; - struct input_dev dev[4]; - int mode[4]; - int registered[4]; + struct grip_port *port[GRIP_MAX_PORTS]; +// struct input_dev *dev[4]; +// int mode[4]; +// int registered[4]; int reads; int bads; /* individual gamepad states */ - int buttons[4]; - int xaxes[4]; - int yaxes[4]; - int dirty[4]; /* has the state been updated? */ +// int buttons[4]; +// int xaxes[4]; +// int yaxes[4]; +// int dirty[4]; /* has the state been updated? */ }; /* @@ -85,16 +99,16 @@ struct grip_mp { #define GRIP_MODE_GP 2 #define GRIP_MODE_C64 3 -static int grip_btn_gp[] = { BTN_TR, BTN_TL, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, -1 }; -static int grip_btn_c64[] = { BTN_JOYSTICK, -1 }; +static const int grip_btn_gp[] = { BTN_TR, BTN_TL, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, -1 }; +static const int grip_btn_c64[] = { BTN_JOYSTICK, -1 }; -static int grip_abs_gp[] = { ABS_X, ABS_Y, -1 }; -static int grip_abs_c64[] = { ABS_X, ABS_Y, -1 }; +static const int grip_abs_gp[] = { ABS_X, ABS_Y, -1 }; +static const int grip_abs_c64[] = { ABS_X, ABS_Y, -1 }; -static int *grip_abs[] = { NULL, NULL, grip_abs_gp, grip_abs_c64 }; -static int *grip_btn[] = { NULL, NULL, grip_btn_gp, grip_btn_c64 }; +static const int *grip_abs[] = { NULL, NULL, grip_abs_gp, grip_abs_c64 }; +static const int *grip_btn[] = { NULL, NULL, grip_btn_gp, grip_btn_c64 }; -static char *grip_name[] = { NULL, NULL, "Gravis Grip Pad", "Commodore 64 Joystick" }; +static const char *grip_name[] = { NULL, NULL, "Gravis Grip Pad", "Commodore 64 Joystick" }; static const int init_seq[] = { 1, 0, 1, 1, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 1, @@ -104,9 +118,9 @@ static const int init_seq[] = { /* Maps multiport directional values to X,Y axis values (each axis encoded in 3 bits) */ -static int axis_map[] = { 5, 9, 1, 5, 6, 10, 2, 6, 4, 8, 0, 4, 5, 9, 1, 5 }; +static const int axis_map[] = { 5, 9, 1, 5, 6, 10, 2, 6, 4, 8, 0, 4, 5, 9, 1, 5 }; -static void register_slot(int i, struct grip_mp *grip); +static int register_slot(int i, struct grip_mp *grip); /* * Returns whether an odd or even number of bits are on in pkt. @@ -353,9 +367,10 @@ static int dig_mode_start(struct gameport *gameport, u32 *packet) static int get_and_decode_packet(struct grip_mp *grip, int flags) { + struct grip_port *port; u32 packet; int joytype = 0; - int slot = 0; + int slot; /* Get a packet and check for validity */ @@ -377,6 +392,8 @@ static int get_and_decode_packet(struct grip_mp *grip, int flags) if ((slot < 0) || (slot > 3)) return flags; + port = grip->port[slot]; + /* * Handle "reset" packets, which occur at startup, and when gamepads * are removed or plugged in. May contain configuration of a new gamepad. @@ -385,14 +402,14 @@ static int get_and_decode_packet(struct grip_mp *grip, int flags) joytype = (packet >> 16) & 0x1f; if (!joytype) { - if (grip->registered[slot]) { + if (port->registered) { printk(KERN_INFO "grip_mp: removing %s, slot %d\n", - grip_name[grip->mode[slot]], slot); - input_unregister_device(grip->dev + slot); - grip->registered[slot] = 0; + grip_name[port->mode], slot); + input_unregister_device(port->dev); + port->registered = 0; } dbg("Reset: grip multiport slot %d\n", slot); - grip->mode[slot] = GRIP_MODE_RESET; + port->mode = GRIP_MODE_RESET; flags |= IO_SLOT_CHANGE; return flags; } @@ -402,17 +419,17 @@ static int get_and_decode_packet(struct grip_mp *grip, int flags) if (joytype == 0x1f) { int dir = (packet >> 8) & 0xf; /* eight way directional value */ - grip->buttons[slot] = (~packet) & 0xff; - grip->yaxes[slot] = ((axis_map[dir] >> 2) & 3) - 1; - grip->xaxes[slot] = (axis_map[dir] & 3) - 1; - grip->dirty[slot] = 1; + port->buttons = (~packet) & 0xff; + port->yaxes = ((axis_map[dir] >> 2) & 3) - 1; + port->xaxes = (axis_map[dir] & 3) - 1; + port->dirty = 1; - if (grip->mode[slot] == GRIP_MODE_RESET) + if (port->mode == GRIP_MODE_RESET) flags |= IO_SLOT_CHANGE; - grip->mode[slot] = GRIP_MODE_GP; + port->mode = GRIP_MODE_GP; - if (!grip->registered[slot]) { + if (!port->registered) { dbg("New Grip pad in multiport slot %d.\n", slot); register_slot(slot, grip); } @@ -445,9 +462,9 @@ static int slots_valid(struct grip_mp *grip) return 0; for (slot = 0; slot < 4; slot++) { - if (grip->mode[slot] == GRIP_MODE_RESET) + if (grip->port[slot]->mode == GRIP_MODE_RESET) invalid = 1; - if (grip->mode[slot] != GRIP_MODE_NONE) + if (grip->port[slot]->mode != GRIP_MODE_NONE) active = 1; } @@ -484,7 +501,7 @@ static int multiport_init(struct grip_mp *grip) /* Get packets, store multiport state, and check state's validity */ for (tries = 0; tries < 4096; tries++) { - if ( slots_valid(grip) ) { + if (slots_valid(grip)) { initialized = 1; break; } @@ -499,24 +516,24 @@ static int multiport_init(struct grip_mp *grip) static void report_slot(struct grip_mp *grip, int slot) { - struct input_dev *dev = &(grip->dev[slot]); - int i, buttons = grip->buttons[slot]; + struct grip_port *port = grip->port[slot]; + int i; /* Store button states with linux input driver */ for (i = 0; i < 8; i++) - input_report_key(dev, grip_btn_gp[i], (buttons >> i) & 1); + input_report_key(port->dev, grip_btn_gp[i], (port->buttons >> i) & 1); /* Store axis states with linux driver */ - input_report_abs(dev, ABS_X, grip->xaxes[slot]); - input_report_abs(dev, ABS_Y, grip->yaxes[slot]); + input_report_abs(port->dev, ABS_X, port->xaxes); + input_report_abs(port->dev, ABS_Y, port->yaxes); /* Tell the receiver of the events to process them */ - input_sync(dev); + input_sync(port->dev); - grip->dirty[slot] = 0; + port->dirty = 0; } /* @@ -540,7 +557,7 @@ static void grip_poll(struct gameport *gameport) } for (i = 0; i < 4; i++) - if (grip->dirty[i]) + if (grip->port[i]->dirty) report_slot(grip, i); } @@ -571,35 +588,43 @@ static void grip_close(struct input_dev *dev) * Tell the linux input layer about a newly plugged-in gamepad. */ -static void register_slot(int slot, struct grip_mp *grip) +static int register_slot(int slot, struct grip_mp *grip) { + struct grip_port *port = grip->port[slot]; + struct input_dev *input_dev; int j, t; - grip->dev[slot].private = grip; - grip->dev[slot].open = grip_open; - grip->dev[slot].close = grip_close; - grip->dev[slot].name = grip_name[grip->mode[slot]]; - grip->dev[slot].id.bustype = BUS_GAMEPORT; - grip->dev[slot].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS; - grip->dev[slot].id.product = 0x0100 + grip->mode[slot]; - grip->dev[slot].id.version = 0x0100; - grip->dev[slot].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + port->dev = input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->name = grip_name[port->mode]; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_GRAVIS; + input_dev->id.product = 0x0100 + port->mode; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &grip->gameport->dev; + input_dev->private = grip; + + input_dev->open = grip_open; + input_dev->close = grip_close; - for (j = 0; (t = grip_abs[grip->mode[slot]][j]) >= 0; j++) - input_set_abs_params(&grip->dev[slot], t, -1, 1, 0, 0); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - for (j = 0; (t = grip_btn[grip->mode[slot]][j]) >= 0; j++) + for (j = 0; (t = grip_abs[port->mode][j]) >= 0; j++) + input_set_abs_params(input_dev, t, -1, 1, 0, 0); + + for (j = 0; (t = grip_btn[port->mode][j]) >= 0; j++) if (t > 0) - set_bit(t, grip->dev[slot].keybit); + set_bit(t, input_dev->keybit); - input_register_device(grip->dev + slot); - grip->registered[slot] = 1; + input_register_device(port->dev); + port->registered = 1; - if (grip->dirty[slot]) /* report initial state, if any */ + if (port->dirty) /* report initial state, if any */ report_slot(grip, slot); - printk(KERN_INFO "grip_mp: added %s, slot %d\n", - grip_name[grip->mode[slot]], slot); + return 0; } static int grip_connect(struct gameport *gameport, struct gameport_driver *drv) @@ -626,7 +651,7 @@ static int grip_connect(struct gameport *gameport, struct gameport_driver *drv) goto fail2; } - if (!grip->mode[0] && !grip->mode[1] && !grip->mode[2] && !grip->mode[3]) { + if (!grip->port[0]->mode && !grip->port[1]->mode && !grip->port[2]->mode && !grip->port[3]->mode) { /* nothing plugged in */ err = -ENODEV; goto fail2; @@ -646,8 +671,8 @@ static void grip_disconnect(struct gameport *gameport) int i; for (i = 0; i < 4; i++) - if (grip->registered[i]) - input_unregister_device(grip->dev + i); + if (grip->port[i]->registered) + input_unregister_device(grip->port[i]->dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(grip); diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c index 6a70ec429f06..c528473c09d8 100644 --- a/drivers/input/joystick/guillemot.c +++ b/drivers/input/joystick/guillemot.c @@ -67,7 +67,7 @@ struct guillemot_type { struct guillemot { struct gameport *gameport; - struct input_dev dev; + struct input_dev *dev; int bads; int reads; struct guillemot_type *type; @@ -123,7 +123,7 @@ static int guillemot_read_packet(struct gameport *gameport, u8 *data) static void guillemot_poll(struct gameport *gameport) { struct guillemot *guillemot = gameport_get_drvdata(gameport); - struct input_dev *dev = &guillemot->dev; + struct input_dev *dev = guillemot->dev; u8 data[GUILLEMOT_MAX_LENGTH]; int i; @@ -179,14 +179,20 @@ static void guillemot_close(struct input_dev *dev) static int guillemot_connect(struct gameport *gameport, struct gameport_driver *drv) { struct guillemot *guillemot; + struct input_dev *input_dev; u8 data[GUILLEMOT_MAX_LENGTH]; int i, t; int err; - if (!(guillemot = kzalloc(sizeof(struct guillemot), GFP_KERNEL))) - return -ENOMEM; + guillemot = kzalloc(sizeof(struct guillemot), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!guillemot || !input_dev) { + err = -ENOMEM; + goto fail1; + } guillemot->gameport = gameport; + guillemot->dev = input_dev; gameport_set_drvdata(gameport, guillemot); @@ -216,41 +222,40 @@ static int guillemot_connect(struct gameport *gameport, struct gameport_driver * gameport_set_poll_interval(gameport, 20); sprintf(guillemot->phys, "%s/input0", gameport->phys); - guillemot->type = guillemot_type + i; - guillemot->dev.private = guillemot; - guillemot->dev.open = guillemot_open; - guillemot->dev.close = guillemot_close; + input_dev->name = guillemot_type[i].name; + input_dev->phys = guillemot->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT; + input_dev->id.product = guillemot_type[i].id; + input_dev->id.version = (int)data[14] << 8 | data[15]; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = guillemot; - guillemot->dev.name = guillemot_type[i].name; - guillemot->dev.phys = guillemot->phys; - guillemot->dev.id.bustype = BUS_GAMEPORT; - guillemot->dev.id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT; - guillemot->dev.id.product = guillemot_type[i].id; - guillemot->dev.id.version = (int)data[14] << 8 | data[15]; + input_dev->open = guillemot_open; + input_dev->close = guillemot_close; - guillemot->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; (t = guillemot->type->abs[i]) >= 0; i++) - input_set_abs_params(&guillemot->dev, t, 0, 255, 0, 0); + input_set_abs_params(input_dev, t, 0, 255, 0, 0); if (guillemot->type->hat) { - input_set_abs_params(&guillemot->dev, ABS_HAT0X, -1, 1, 0, 0); - input_set_abs_params(&guillemot->dev, ABS_HAT0Y, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0Y, -1, 1, 0, 0); } for (i = 0; (t = guillemot->type->btn[i]) >= 0; i++) - set_bit(t, guillemot->dev.keybit); + set_bit(t, input_dev->keybit); - input_register_device(&guillemot->dev); - printk(KERN_INFO "input: %s ver %d.%02d on %s\n", - guillemot->type->name, data[14], data[15], gameport->phys); + input_register_device(guillemot->dev); return 0; fail2: gameport_close(gameport); fail1: gameport_set_drvdata(gameport, NULL); + input_free_device(input_dev); kfree(guillemot); return err; } @@ -260,7 +265,7 @@ static void guillemot_disconnect(struct gameport *gameport) struct guillemot *guillemot = gameport_get_drvdata(gameport); printk(KERN_INFO "guillemot.c: Failed %d reads out of %d on %s\n", guillemot->reads, guillemot->bads, guillemot->phys); - input_unregister_device(&guillemot->dev); + input_unregister_device(guillemot->dev); gameport_close(gameport); kfree(guillemot); } diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index e31b7b93fde2..64b9c31c47fc 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -144,7 +144,7 @@ static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect) int is_update; /* Check this effect type is supported by this device */ - if (!test_bit(effect->type, iforce->dev.ffbit)) + if (!test_bit(effect->type, iforce->dev->ffbit)) return -EINVAL; /* @@ -152,30 +152,31 @@ static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect) */ if (effect->id == -1) { - for (id=0; id < FF_EFFECTS_MAX; ++id) - if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags)) break; + for (id = 0; id < FF_EFFECTS_MAX; ++id) + if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags)) + break; - if ( id == FF_EFFECTS_MAX || id >= iforce->dev.ff_effects_max) + if (id == FF_EFFECTS_MAX || id >= iforce->dev->ff_effects_max) return -ENOMEM; effect->id = id; iforce->core_effects[id].owner = current->pid; - iforce->core_effects[id].flags[0] = (1<core_effects[id].flags[0] = (1 << FF_CORE_IS_USED); /* Only IS_USED bit must be set */ is_update = FALSE; } else { /* We want to update an effect */ - if (!CHECK_OWNERSHIP(effect->id, iforce)) return -EACCES; + if (!CHECK_OWNERSHIP(effect->id, iforce)) + return -EACCES; /* Parameter type cannot be updated */ if (effect->type != iforce->core_effects[effect->id].effect.type) return -EINVAL; /* Check the effect is not already being updated */ - if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags)) { + if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags)) return -EAGAIN; - } is_update = TRUE; } @@ -339,15 +340,19 @@ void iforce_delete_device(struct iforce *iforce) int iforce_init_device(struct iforce *iforce) { + struct input_dev *input_dev; unsigned char c[] = "CEOV"; int i; + input_dev = input_allocate_device(); + if (input_dev) + return -ENOMEM; + init_waitqueue_head(&iforce->wait); spin_lock_init(&iforce->xmit_lock); init_MUTEX(&iforce->mem_mutex); iforce->xmit.buf = iforce->xmit_data; - - iforce->dev.ff_effects_max = 10; + iforce->dev = input_dev; /* * Input device fields. @@ -356,26 +361,27 @@ int iforce_init_device(struct iforce *iforce) switch (iforce->bus) { #ifdef CONFIG_JOYSTICK_IFORCE_USB case IFORCE_USB: - iforce->dev.id.bustype = BUS_USB; - iforce->dev.dev = &iforce->usbdev->dev; + input_dev->id.bustype = BUS_USB; + input_dev->cdev.dev = &iforce->usbdev->dev; break; #endif #ifdef CONFIG_JOYSTICK_IFORCE_232 case IFORCE_232: - iforce->dev.id.bustype = BUS_RS232; - iforce->dev.dev = &iforce->serio->dev; + input_dev->id.bustype = BUS_RS232; + input_dev->cdev.dev = &iforce->serio->dev; break; #endif } - iforce->dev.private = iforce; - iforce->dev.name = "Unknown I-Force device"; - iforce->dev.open = iforce_open; - iforce->dev.close = iforce_release; - iforce->dev.flush = iforce_flush; - iforce->dev.event = iforce_input_event; - iforce->dev.upload_effect = iforce_upload_effect; - iforce->dev.erase_effect = iforce_erase_effect; + input_dev->private = iforce; + input_dev->name = "Unknown I-Force device"; + input_dev->open = iforce_open; + input_dev->close = iforce_release; + input_dev->flush = iforce_flush; + input_dev->event = iforce_input_event; + input_dev->upload_effect = iforce_upload_effect; + input_dev->erase_effect = iforce_erase_effect; + input_dev->ff_effects_max = 10; /* * On-device memory allocation. @@ -399,7 +405,8 @@ int iforce_init_device(struct iforce *iforce) if (i == 20) { /* 5 seconds */ printk(KERN_ERR "iforce-main.c: Timeout waiting for response from device.\n"); - return -1; + input_free_device(input_dev); + return -ENODEV; } /* @@ -407,12 +414,12 @@ int iforce_init_device(struct iforce *iforce) */ if (!iforce_get_id_packet(iforce, "M")) - iforce->dev.id.vendor = (iforce->edata[2] << 8) | iforce->edata[1]; + input_dev->id.vendor = (iforce->edata[2] << 8) | iforce->edata[1]; else printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet M\n"); if (!iforce_get_id_packet(iforce, "P")) - iforce->dev.id.product = (iforce->edata[2] << 8) | iforce->edata[1]; + input_dev->id.product = (iforce->edata[2] << 8) | iforce->edata[1]; else printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet P\n"); @@ -422,15 +429,15 @@ int iforce_init_device(struct iforce *iforce) printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet B\n"); if (!iforce_get_id_packet(iforce, "N")) - iforce->dev.ff_effects_max = iforce->edata[1]; + iforce->dev->ff_effects_max = iforce->edata[1]; else printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet N\n"); /* Check if the device can store more effects than the driver can really handle */ - if (iforce->dev.ff_effects_max > FF_EFFECTS_MAX) { + if (iforce->dev->ff_effects_max > FF_EFFECTS_MAX) { printk(KERN_WARNING "input??: Device can handle %d effects, but N_EFFECTS_MAX is set to %d in iforce.h\n", - iforce->dev.ff_effects_max, FF_EFFECTS_MAX); - iforce->dev.ff_effects_max = FF_EFFECTS_MAX; + iforce->dev->ff_effects_max, FF_EFFECTS_MAX); + iforce->dev->ff_effects_max = FF_EFFECTS_MAX; } /* @@ -453,29 +460,28 @@ int iforce_init_device(struct iforce *iforce) */ for (i = 0; iforce_device[i].idvendor; i++) - if (iforce_device[i].idvendor == iforce->dev.id.vendor && - iforce_device[i].idproduct == iforce->dev.id.product) + if (iforce_device[i].idvendor == input_dev->id.vendor && + iforce_device[i].idproduct == input_dev->id.product) break; iforce->type = iforce_device + i; - iforce->dev.name = iforce->type->name; + input_dev->name = iforce->type->name; /* * Set input device bitfields and ranges. */ - iforce->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS); for (i = 0; iforce->type->btn[i] >= 0; i++) { signed short t = iforce->type->btn[i]; - set_bit(t, iforce->dev.keybit); + set_bit(t, input_dev->keybit); } - set_bit(BTN_DEAD, iforce->dev.keybit); + set_bit(BTN_DEAD, input_dev->keybit); for (i = 0; iforce->type->abs[i] >= 0; i++) { signed short t = iforce->type->abs[i]; - set_bit(t, iforce->dev.absbit); switch (t) { @@ -483,52 +489,42 @@ int iforce_init_device(struct iforce *iforce) case ABS_Y: case ABS_WHEEL: - iforce->dev.absmax[t] = 1920; - iforce->dev.absmin[t] = -1920; - iforce->dev.absflat[t] = 128; - iforce->dev.absfuzz[t] = 16; - - set_bit(t, iforce->dev.ffbit); + input_set_abs_params(input_dev, t, -1920, 1920, 16, 128); + set_bit(t, input_dev->ffbit); break; case ABS_THROTTLE: case ABS_GAS: case ABS_BRAKE: - iforce->dev.absmax[t] = 255; - iforce->dev.absmin[t] = 0; + input_set_abs_params(input_dev, t, 0, 255, 0, 0); break; case ABS_RUDDER: - iforce->dev.absmax[t] = 127; - iforce->dev.absmin[t] = -128; + input_set_abs_params(input_dev, t, -128, 127, 0, 0); break; case ABS_HAT0X: case ABS_HAT0Y: case ABS_HAT1X: case ABS_HAT1Y: - iforce->dev.absmax[t] = 1; - iforce->dev.absmin[t] = -1; + + input_set_abs_params(input_dev, t, -1, 1, 0, 0); break; } } for (i = 0; iforce->type->ff[i] >= 0; i++) - set_bit(iforce->type->ff[i], iforce->dev.ffbit); + set_bit(iforce->type->ff[i], input_dev->ffbit); /* * Register input device. */ - input_register_device(&iforce->dev); - - printk(KERN_DEBUG "iforce->dev.open = %p\n", iforce->dev.open); + input_register_device(iforce->dev); - printk(KERN_INFO "input: %s [%d effects, %ld bytes memory]\n", - iforce->dev.name, iforce->dev.ff_effects_max, - iforce->device_memory.end); + printk(KERN_DEBUG "iforce->dev->open = %p\n", iforce->dev->open); return 0; } diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index e5a31e55d3e2..4a2629243e19 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -139,7 +139,8 @@ printk(KERN_DEBUG "iforce-packets.c: control_playback %d %d\n", id, value); static int mark_core_as_ready(struct iforce *iforce, unsigned short addr) { int i; - for (i=0; idev.ff_effects_max; ++i) { + + for (i = 0; i < iforce->dev->ff_effects_max; ++i) { if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags) && (iforce->core_effects[i].mod1_chunk.start == addr || iforce->core_effects[i].mod2_chunk.start == addr)) { @@ -153,7 +154,7 @@ static int mark_core_as_ready(struct iforce *iforce, unsigned short addr) void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data, struct pt_regs *regs) { - struct input_dev *dev = &iforce->dev; + struct input_dev *dev = iforce->dev; int i; static int being_used = 0; diff --git a/drivers/input/joystick/iforce/iforce-serio.c b/drivers/input/joystick/iforce/iforce-serio.c index 11f51905cba7..64a78c515484 100644 --- a/drivers/input/joystick/iforce/iforce-serio.c +++ b/drivers/input/joystick/iforce/iforce-serio.c @@ -131,11 +131,10 @@ static int iforce_serio_connect(struct serio *serio, struct serio_driver *drv) struct iforce *iforce; int err; - if (!(iforce = kmalloc(sizeof(struct iforce), GFP_KERNEL))) + iforce = kzalloc(sizeof(struct iforce), GFP_KERNEL); + if (!iforce) return -ENOMEM; - memset(iforce, 0, sizeof(struct iforce)); - iforce->bus = IFORCE_232; iforce->serio = serio; @@ -148,7 +147,8 @@ static int iforce_serio_connect(struct serio *serio, struct serio_driver *drv) return err; } - if (iforce_init_device(iforce)) { + err = iforce_init_device(iforce); + if (err) { serio_close(serio); serio_set_drvdata(serio, NULL); kfree(iforce); @@ -162,7 +162,7 @@ static void iforce_serio_disconnect(struct serio *serio) { struct iforce *iforce = serio_get_drvdata(serio); - input_unregister_device(&iforce->dev); + input_unregister_device(iforce->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(iforce); diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 58600f91eff5..64b4a3080985 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -135,28 +135,24 @@ static int iforce_usb_probe(struct usb_interface *intf, struct usb_host_interface *interface; struct usb_endpoint_descriptor *epirq, *epout; struct iforce *iforce; + int err = -ENOMEM; interface = intf->cur_altsetting; epirq = &interface->endpoint[0].desc; epout = &interface->endpoint[1].desc; - if (!(iforce = kmalloc(sizeof(struct iforce) + 32, GFP_KERNEL))) + if (!(iforce = kzalloc(sizeof(struct iforce) + 32, GFP_KERNEL))) goto fail; - memset(iforce, 0, sizeof(struct iforce)); - - if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL))) { + if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL))) goto fail; - } - if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL))) { + if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL))) goto fail; - } - if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL))) { + if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL))) goto fail; - } iforce->bus = IFORCE_USB; iforce->usbdev = dev; @@ -174,7 +170,9 @@ static int iforce_usb_probe(struct usb_interface *intf, usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0), (void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce); - if (iforce_init_device(iforce)) goto fail; + err = iforce_init_device(iforce); + if (err) + goto fail; usb_set_intfdata(intf, iforce); return 0; @@ -187,7 +185,7 @@ static int iforce_usb_probe(struct usb_interface *intf, kfree(iforce); } - return -ENODEV; + return err; } /* Called by iforce_delete() */ @@ -211,7 +209,7 @@ static void iforce_usb_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (iforce) { iforce->usbdev = NULL; - input_unregister_device(&iforce->dev); + input_unregister_device(iforce->dev); if (!open) { iforce_delete_device(iforce); diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index bce247bc300b..146f406b8f8a 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -117,7 +117,7 @@ struct iforce_device { }; struct iforce { - struct input_dev dev; /* Input device interface */ + struct input_dev *dev; /* Input device interface */ struct iforce_device *type; int bus; diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c index d7b3472bd686..8511ee7bb263 100644 --- a/drivers/input/joystick/interact.c +++ b/drivers/input/joystick/interact.c @@ -54,7 +54,7 @@ MODULE_LICENSE("GPL"); struct interact { struct gameport *gameport; - struct input_dev dev; + struct input_dev *dev; int bads; int reads; unsigned char type; @@ -130,7 +130,7 @@ static int interact_read_packet(struct gameport *gameport, int length, u32 *data static void interact_poll(struct gameport *gameport) { struct interact *interact = gameport_get_drvdata(gameport); - struct input_dev *dev = &interact->dev; + struct input_dev *dev = interact->dev; u32 data[3]; int i; @@ -208,14 +208,20 @@ static void interact_close(struct input_dev *dev) static int interact_connect(struct gameport *gameport, struct gameport_driver *drv) { struct interact *interact; + struct input_dev *input_dev; __u32 data[3]; int i, t; int err; - if (!(interact = kzalloc(sizeof(struct interact), GFP_KERNEL))) - return -ENOMEM; + interact = kzalloc(sizeof(struct interact), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!interact || !input_dev) { + err = -ENOMEM; + goto fail1; + } interact->gameport = gameport; + interact->dev = input_dev; gameport_set_drvdata(gameport, interact); @@ -249,41 +255,40 @@ static int interact_connect(struct gameport *gameport, struct gameport_driver *d interact->type = i; interact->length = interact_type[i].length; - interact->dev.private = interact; - interact->dev.open = interact_open; - interact->dev.close = interact_close; + input_dev->name = interact_type[i].name; + input_dev->phys = interact->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_INTERACT; + input_dev->id.product = interact_type[i].id; + input_dev->id.version = 0x0100; + input_dev->private = interact; - interact->dev.name = interact_type[i].name; - interact->dev.phys = interact->phys; - interact->dev.id.bustype = BUS_GAMEPORT; - interact->dev.id.vendor = GAMEPORT_ID_VENDOR_INTERACT; - interact->dev.id.product = interact_type[i].id; - interact->dev.id.version = 0x0100; + input_dev->open = interact_open; + input_dev->close = interact_close; - interact->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) { - set_bit(t, interact->dev.absbit); + set_bit(t, input_dev->absbit); if (i < interact_type[interact->type].b8) { - interact->dev.absmin[t] = 0; - interact->dev.absmax[t] = 255; + input_dev->absmin[t] = 0; + input_dev->absmax[t] = 255; } else { - interact->dev.absmin[t] = -1; - interact->dev.absmax[t] = 1; + input_dev->absmin[t] = -1; + input_dev->absmax[t] = 1; } } for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++) - set_bit(t, interact->dev.keybit); + set_bit(t, input_dev->keybit); - input_register_device(&interact->dev); - printk(KERN_INFO "input: %s on %s\n", - interact_type[interact->type].name, gameport->phys); + input_register_device(interact->dev); return 0; fail2: gameport_close(gameport); fail1: gameport_set_drvdata(gameport, NULL); + input_free_device(input_dev); kfree(interact); return err; } @@ -292,7 +297,7 @@ static void interact_disconnect(struct gameport *gameport) { struct interact *interact = gameport_get_drvdata(gameport); - input_unregister_device(&interact->dev); + input_unregister_device(interact->dev); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(interact); diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c index 1ba503627242..ca3cc2319d6a 100644 --- a/drivers/input/joystick/magellan.c +++ b/drivers/input/joystick/magellan.c @@ -49,14 +49,13 @@ MODULE_LICENSE("GPL"); static int magellan_buttons[] = { BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 }; static int magellan_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; -static char *magellan_name = "LogiCad3D Magellan / SpaceMouse"; /* * Per-Magellan data. */ struct magellan { - struct input_dev dev; + struct input_dev *dev; int idx; unsigned char data[MAGELLAN_MAX_LENGTH]; char phys[32]; @@ -85,7 +84,7 @@ static int magellan_crunch_nibbles(unsigned char *data, int count) static void magellan_process_packet(struct magellan* magellan, struct pt_regs *regs) { - struct input_dev *dev = &magellan->dev; + struct input_dev *dev = magellan->dev; unsigned char *data = magellan->data; int i, t; @@ -138,9 +137,9 @@ static void magellan_disconnect(struct serio *serio) { struct magellan* magellan = serio_get_drvdata(serio); - input_unregister_device(&magellan->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(magellan->dev); kfree(magellan); } @@ -153,52 +152,48 @@ static void magellan_disconnect(struct serio *serio) static int magellan_connect(struct serio *serio, struct serio_driver *drv) { struct magellan *magellan; - int i, t; - int err; - - if (!(magellan = kmalloc(sizeof(struct magellan), GFP_KERNEL))) - return -ENOMEM; + struct input_dev *input_dev; + int err = -ENOMEM; + int i; - memset(magellan, 0, sizeof(struct magellan)); + magellan = kzalloc(sizeof(struct magellan), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!magellan || !input_dev) + goto fail; - magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + magellan->dev = input_dev; + sprintf(magellan->phys, "%s/input0", serio->phys); - for (i = 0; i < 9; i++) - set_bit(magellan_buttons[i], magellan->dev.keybit); + input_dev->name = "LogiCad3D Magellan / SpaceMouse"; + input_dev->phys = magellan->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_MAGELLAN; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = magellan; - for (i = 0; i < 6; i++) { - t = magellan_axes[i]; - set_bit(t, magellan->dev.absbit); - magellan->dev.absmin[t] = -360; - magellan->dev.absmax[t] = 360; - } + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - sprintf(magellan->phys, "%s/input0", serio->phys); + for (i = 0; i < 9; i++) + set_bit(magellan_buttons[i], input_dev->keybit); - init_input_dev(&magellan->dev); - magellan->dev.private = magellan; - magellan->dev.name = magellan_name; - magellan->dev.phys = magellan->phys; - magellan->dev.id.bustype = BUS_RS232; - magellan->dev.id.vendor = SERIO_MAGELLAN; - magellan->dev.id.product = 0x0001; - magellan->dev.id.version = 0x0100; - magellan->dev.dev = &serio->dev; + for (i = 0; i < 6; i++) + input_set_abs_params(input_dev, magellan_axes[i], -360, 360, 0, 0); serio_set_drvdata(serio, magellan); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(magellan); - return err; - } - - input_register_device(&magellan->dev); - - printk(KERN_INFO "input: %s on %s\n", magellan_name, serio->phys); + if (err) + goto fail; + input_register_device(magellan->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(magellan); + return err; } /* diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c index 9e0353721a35..eaaad45cc750 100644 --- a/drivers/input/joystick/sidewinder.c +++ b/drivers/input/joystick/sidewinder.c @@ -113,7 +113,7 @@ static struct { struct sw { struct gameport *gameport; - struct input_dev dev[4]; + struct input_dev *dev[4]; char name[64]; char phys[4][32]; int length; @@ -301,7 +301,7 @@ static int sw_check(__u64 t) static int sw_parse(unsigned char *buf, struct sw *sw) { int hat, i, j; - struct input_dev *dev = sw->dev; + struct input_dev *dev; switch (sw->type) { @@ -310,6 +310,8 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (sw_check(GB(0,64)) || (hat = (GB(6,1) << 3) | GB(60,3)) > 8) return -1; + dev = sw->dev[0]; + input_report_abs(dev, ABS_X, (GB( 3,3) << 7) | GB(16,7)); input_report_abs(dev, ABS_Y, (GB( 0,3) << 7) | GB(24,7)); input_report_abs(dev, ABS_RZ, (GB(35,2) << 7) | GB(40,7)); @@ -335,13 +337,13 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (sw_parity(GB(i*15,15))) return -1; - input_report_abs(dev + i, ABS_X, GB(i*15+3,1) - GB(i*15+2,1)); - input_report_abs(dev + i, ABS_Y, GB(i*15+0,1) - GB(i*15+1,1)); + input_report_abs(sw->dev[i], ABS_X, GB(i*15+3,1) - GB(i*15+2,1)); + input_report_abs(sw->dev[i], ABS_Y, GB(i*15+0,1) - GB(i*15+1,1)); for (j = 0; j < 10; j++) - input_report_key(dev + i, sw_btn[SW_ID_GP][j], !GB(i*15+j+4,1)); + input_report_key(sw->dev[i], sw_btn[SW_ID_GP][j], !GB(i*15+j+4,1)); - input_sync(dev + i); + input_sync(sw->dev[i]); } return 0; @@ -352,6 +354,7 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (!sw_parity(GB(0,48)) || (hat = GB(42,4)) > 8) return -1; + dev = sw->dev[0]; input_report_abs(dev, ABS_X, GB( 9,10)); input_report_abs(dev, ABS_Y, GB(19,10)); input_report_abs(dev, ABS_RZ, GB(36, 6)); @@ -372,6 +375,7 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (!sw_parity(GB(0,43)) || (hat = GB(28,4)) > 8) return -1; + dev = sw->dev[0]; input_report_abs(dev, ABS_X, GB( 0,10)); input_report_abs(dev, ABS_Y, GB(16,10)); input_report_abs(dev, ABS_THROTTLE, GB(32, 6)); @@ -396,6 +400,7 @@ static int sw_parse(unsigned char *buf, struct sw *sw) if (!sw_parity(GB(0,33))) return -1; + dev = sw->dev[0]; input_report_abs(dev, ABS_RX, GB( 0,10)); input_report_abs(dev, ABS_RUDDER, GB(10, 6)); input_report_abs(dev, ABS_THROTTLE, GB(16, 6)); @@ -581,6 +586,7 @@ static int sw_guess_mode(unsigned char *buf, int len) static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) { struct sw *sw; + struct input_dev *input_dev; int i, j, k, l; int err; unsigned char *buf = NULL; /* [SW_LENGTH] */ @@ -729,42 +735,50 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv) sprintf(sw->name, "Microsoft SideWinder %s", sw_name[sw->type]); sprintf(sw->phys[i], "%s/input%d", gameport->phys, i); - sw->dev[i].private = sw; + input_dev = input_allocate_device(); + if (!input_dev) { + err = -ENOMEM; + goto fail3; + } - sw->dev[i].open = sw_open; - sw->dev[i].close = sw_close; + input_dev->name = sw->name; + input_dev->phys = sw->phys[i]; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT; + input_dev->id.product = sw->type; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &gameport->dev; + input_dev->private = sw; - sw->dev[i].name = sw->name; - sw->dev[i].phys = sw->phys[i]; - sw->dev[i].id.bustype = BUS_GAMEPORT; - sw->dev[i].id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT; - sw->dev[i].id.product = sw->type; - sw->dev[i].id.version = 0x0100; + input_dev->open = sw_open; + input_dev->close = sw_close; - sw->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); for (j = 0; (bits = sw_bit[sw->type][j]); j++) { code = sw_abs[sw->type][j]; - set_bit(code, sw->dev[i].absbit); - sw->dev[i].absmax[code] = (1 << bits) - 1; - sw->dev[i].absmin[code] = (bits == 1) ? -1 : 0; - sw->dev[i].absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0; + set_bit(code, input_dev->absbit); + input_dev->absmax[code] = (1 << bits) - 1; + input_dev->absmin[code] = (bits == 1) ? -1 : 0; + input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0; if (code != ABS_THROTTLE) - sw->dev[i].absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0; + input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0; } for (j = 0; (code = sw_btn[sw->type][j]); j++) - set_bit(code, sw->dev[i].keybit); + set_bit(code, input_dev->keybit); + + dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k); - input_register_device(sw->dev + i); - printk(KERN_INFO "input: %s%s on %s [%d-bit id %d data %d]\n", - sw->name, comment, gameport->phys, m, l, k); + input_register_device(sw->dev[i]); } return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail3: while (--i >= 0) + input_unregister_device(sw->dev[i]); + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); kfree(sw); kfree(buf); kfree(idbuf); @@ -777,7 +791,7 @@ static void sw_disconnect(struct gameport *gameport) int i; for (i = 0; i < sw->number; i++) - input_unregister_device(sw->dev + i); + input_unregister_device(sw->dev[i]); gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(sw); diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c index a436f2220856..d6f8db8ec3fd 100644 --- a/drivers/input/joystick/spaceball.c +++ b/drivers/input/joystick/spaceball.c @@ -70,8 +70,7 @@ static char *spaceball_names[] = { */ struct spaceball { - struct input_dev dev; - struct serio *serio; + struct input_dev *dev; int idx; int escape; unsigned char data[SPACEBALL_MAX_LENGTH]; @@ -85,7 +84,7 @@ struct spaceball { static void spaceball_process_packet(struct spaceball* spaceball, struct pt_regs *regs) { - struct input_dev *dev = &spaceball->dev; + struct input_dev *dev = spaceball->dev; unsigned char *data = spaceball->data; int i; @@ -193,9 +192,9 @@ static void spaceball_disconnect(struct serio *serio) { struct spaceball* spaceball = serio_get_drvdata(serio); - input_unregister_device(&spaceball->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(spaceball->dev); kfree(spaceball); } @@ -208,69 +207,62 @@ static void spaceball_disconnect(struct serio *serio) static int spaceball_connect(struct serio *serio, struct serio_driver *drv) { struct spaceball *spaceball; - int i, t, id; - int err; + struct input_dev *input_dev; + int err = -ENOMEM; + int i, id; if ((id = serio->id.id) > SPACEBALL_MAX_ID) return -ENODEV; - if (!(spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL))) - return - ENOMEM; + spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!spaceball || !input_dev) + goto fail; - memset(spaceball, 0, sizeof(struct spaceball)); + spaceball->dev = input_dev; + sprintf(spaceball->phys, "%s/input0", serio->phys); + + input_dev->name = spaceball_names[id]; + input_dev->phys = spaceball->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_SPACEBALL; + input_dev->id.product = id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = spaceball; - spaceball->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); switch (id) { case SPACEBALL_4000FLX: case SPACEBALL_4000FLX_L: - spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_9); - spaceball->dev.keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE); + input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_9); + input_dev->keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE); default: - spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) + input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7) | BIT(BTN_8); case SPACEBALL_3003C: - spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8); + input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8); } - for (i = 0; i < 6; i++) { - t = spaceball_axes[i]; - set_bit(t, spaceball->dev.absbit); - spaceball->dev.absmin[t] = i < 3 ? -8000 : -1600; - spaceball->dev.absmax[t] = i < 3 ? 8000 : 1600; - spaceball->dev.absflat[t] = i < 3 ? 40 : 8; - spaceball->dev.absfuzz[t] = i < 3 ? 8 : 2; + for (i = 0; i < 3; i++) { + input_set_abs_params(input_dev, ABS_X + i, -8000, 8000, 8, 40); + input_set_abs_params(input_dev, ABS_RX + i, -1600, 1600, 2, 8); } - spaceball->serio = serio; - spaceball->dev.private = spaceball; - - sprintf(spaceball->phys, "%s/input0", serio->phys); - - init_input_dev(&spaceball->dev); - spaceball->dev.name = spaceball_names[id]; - spaceball->dev.phys = spaceball->phys; - spaceball->dev.id.bustype = BUS_RS232; - spaceball->dev.id.vendor = SERIO_SPACEBALL; - spaceball->dev.id.product = id; - spaceball->dev.id.version = 0x0100; - spaceball->dev.dev = &serio->dev; - serio_set_drvdata(serio, spaceball); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(spaceball); - return err; - } - - input_register_device(&spaceball->dev); - - printk(KERN_INFO "input: %s on serio%s\n", - spaceball_names[id], serio->phys); + if (err) + goto fail; + input_register_device(spaceball->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(spaceball); + return err; } /* diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c index 01fd2e4791ae..7c123a01c58e 100644 --- a/drivers/input/joystick/spaceorb.c +++ b/drivers/input/joystick/spaceorb.c @@ -52,15 +52,13 @@ MODULE_LICENSE("GPL"); static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A }; static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; -static char *spaceorb_name = "SpaceTec SpaceOrb 360 / Avenger"; /* * Per-Orb data. */ struct spaceorb { - struct input_dev dev; - struct serio *serio; + struct input_dev *dev; int idx; unsigned char data[SPACEORB_MAX_LENGTH]; char phys[32]; @@ -78,7 +76,7 @@ static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *regs) { - struct input_dev *dev = &spaceorb->dev; + struct input_dev *dev = spaceorb->dev; unsigned char *data = spaceorb->data; unsigned char c = 0; int axes[6]; @@ -95,8 +93,8 @@ static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *r case 'R': /* Reset packet */ spaceorb->data[spaceorb->idx - 1] = 0; for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++); - printk(KERN_INFO "input: %s [%s] on %s\n", - spaceorb_name, spaceorb->data + i, spaceorb->serio->phys); + printk(KERN_INFO "input: %s [%s] is %s\n", + dev->name, spaceorb->data + i, spaceorb->phys); break; case 'D': /* Ball + button data */ @@ -123,7 +121,7 @@ static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *r case 'E': /* Error packet */ if (spaceorb->idx != 4) return; - printk(KERN_ERR "joy-spaceorb: Device error. [ "); + printk(KERN_ERR "spaceorb: Device error. [ "); for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]); printk("]\n"); break; @@ -154,9 +152,9 @@ static void spaceorb_disconnect(struct serio *serio) { struct spaceorb* spaceorb = serio_get_drvdata(serio); - input_unregister_device(&spaceorb->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(spaceorb->dev); kfree(spaceorb); } @@ -169,52 +167,48 @@ static void spaceorb_disconnect(struct serio *serio) static int spaceorb_connect(struct serio *serio, struct serio_driver *drv) { struct spaceorb *spaceorb; - int i, t; - int err; - - if (!(spaceorb = kmalloc(sizeof(struct spaceorb), GFP_KERNEL))) - return -ENOMEM; - - memset(spaceorb, 0, sizeof(struct spaceorb)); + struct input_dev *input_dev; + int err = -ENOMEM; + int i; - spaceorb->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!spaceorb || !input_dev) + goto fail; - for (i = 0; i < 6; i++) - set_bit(spaceorb_buttons[i], spaceorb->dev.keybit); + spaceorb->dev = input_dev; + sprintf(spaceorb->phys, "%s/input0", serio->phys); - for (i = 0; i < 6; i++) { - t = spaceorb_axes[i]; - set_bit(t, spaceorb->dev.absbit); - spaceorb->dev.absmin[t] = -508; - spaceorb->dev.absmax[t] = 508; - } + input_dev->name = "SpaceTec SpaceOrb 360 / Avenger"; + input_dev->phys = spaceorb->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_SPACEORB; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = spaceorb; - spaceorb->serio = serio; - spaceorb->dev.private = spaceorb; + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - sprintf(spaceorb->phys, "%s/input0", serio->phys); + for (i = 0; i < 6; i++) + set_bit(spaceorb_buttons[i], input_dev->keybit); - init_input_dev(&spaceorb->dev); - spaceorb->dev.name = spaceorb_name; - spaceorb->dev.phys = spaceorb->phys; - spaceorb->dev.id.bustype = BUS_RS232; - spaceorb->dev.id.vendor = SERIO_SPACEORB; - spaceorb->dev.id.product = 0x0001; - spaceorb->dev.id.version = 0x0100; - spaceorb->dev.dev = &serio->dev; + for (i = 0; i < 6; i++) + input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0); serio_set_drvdata(serio, spaceorb); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(spaceorb); - return err; - } - - input_register_device(&spaceorb->dev); + if (err) + goto fail; + input_register_device(spaceorb->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(spaceorb); + return err; } /* diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c index 6f6e6753d590..0a9ed1d30636 100644 --- a/drivers/input/joystick/stinger.c +++ b/drivers/input/joystick/stinger.c @@ -48,14 +48,12 @@ MODULE_LICENSE("GPL"); #define STINGER_MAX_LENGTH 8 -static char *stinger_name = "Gravis Stinger"; - /* * Per-Stinger data. */ struct stinger { - struct input_dev dev; + struct input_dev *dev; int idx; unsigned char data[STINGER_MAX_LENGTH]; char phys[32]; @@ -68,7 +66,7 @@ struct stinger { static void stinger_process_packet(struct stinger *stinger, struct pt_regs *regs) { - struct input_dev *dev = &stinger->dev; + struct input_dev *dev = stinger->dev; unsigned char *data = stinger->data; if (!stinger->idx) return; @@ -126,9 +124,9 @@ static void stinger_disconnect(struct serio *serio) { struct stinger *stinger = serio_get_drvdata(serio); - input_unregister_device(&stinger->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(stinger->dev); kfree(stinger); } @@ -141,53 +139,46 @@ static void stinger_disconnect(struct serio *serio) static int stinger_connect(struct serio *serio, struct serio_driver *drv) { struct stinger *stinger; - int i; - int err; - - if (!(stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL))) - return -ENOMEM; - - memset(stinger, 0, sizeof(struct stinger)); + struct input_dev *input_dev; + int err = -ENOMEM; - stinger->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - stinger->dev.keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) | \ - BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) | \ - BIT(BTN_START) | BIT(BTN_SELECT); - stinger->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!stinger || !input_dev) + goto fail; + stinger->dev = input_dev; sprintf(stinger->phys, "%s/serio0", serio->phys); - init_input_dev(&stinger->dev); - stinger->dev.name = stinger_name; - stinger->dev.phys = stinger->phys; - stinger->dev.id.bustype = BUS_RS232; - stinger->dev.id.vendor = SERIO_STINGER; - stinger->dev.id.product = 0x0001; - stinger->dev.id.version = 0x0100; - stinger->dev.dev = &serio->dev; - - for (i = 0; i < 2; i++) { - stinger->dev.absmax[ABS_X+i] = 64; - stinger->dev.absmin[ABS_X+i] = -64; - stinger->dev.absflat[ABS_X+i] = 4; - } - - stinger->dev.private = stinger; + input_dev->name = "Gravis Stinger"; + input_dev->phys = stinger->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_STINGER; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = stinger; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) | + BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) | + BIT(BTN_START) | BIT(BTN_SELECT); + input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 4); + input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 4); serio_set_drvdata(serio, stinger); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(stinger); - return err; - } - - input_register_device(&stinger->dev); - - printk(KERN_INFO "input: %s on %s\n", stinger_name, serio->phys); + if (err) + goto fail; + input_register_device(stinger->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(stinger); + return err; } /* diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c index 7431efc4330e..3a7d1bb46472 100644 --- a/drivers/input/joystick/tmdc.c +++ b/drivers/input/joystick/tmdc.c @@ -63,37 +63,70 @@ MODULE_LICENSE("GPL"); #define TMDC_ABS_HAT 4 #define TMDC_BTN 16 -static unsigned char tmdc_byte_a[16] = { 0, 1, 3, 4, 6, 7 }; -static unsigned char tmdc_byte_d[16] = { 2, 5, 8, 9 }; +static const unsigned char tmdc_byte_a[16] = { 0, 1, 3, 4, 6, 7 }; +static const unsigned char tmdc_byte_d[16] = { 2, 5, 8, 9 }; -static signed char tmdc_abs[TMDC_ABS] = +static const signed char tmdc_abs[TMDC_ABS] = { ABS_X, ABS_Y, ABS_RUDDER, ABS_THROTTLE, ABS_RX, ABS_RY, ABS_RZ }; -static signed char tmdc_abs_hat[TMDC_ABS_HAT] = +static const signed char tmdc_abs_hat[TMDC_ABS_HAT] = { ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y }; -static signed char tmdc_abs_at[TMDC_ABS] = +static const signed char tmdc_abs_at[TMDC_ABS] = { ABS_X, ABS_Y, ABS_RUDDER, -1, ABS_THROTTLE }; -static signed char tmdc_abs_fm[TMDC_ABS] = +static const signed char tmdc_abs_fm[TMDC_ABS] = { ABS_RX, ABS_RY, ABS_X, ABS_Y }; -static short tmdc_btn_pad[TMDC_BTN] = +static const short tmdc_btn_pad[TMDC_BTN] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_START, BTN_SELECT, BTN_TL, BTN_TR }; -static short tmdc_btn_joy[TMDC_BTN] = +static const short tmdc_btn_joy[TMDC_BTN] = { BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN_BASE, BTN_BASE2, BTN_THUMB2, BTN_PINKIE, BTN_BASE3, BTN_BASE4, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z }; -static short tmdc_btn_fm[TMDC_BTN] = +static const short tmdc_btn_fm[TMDC_BTN] = { BTN_TRIGGER, BTN_C, BTN_B, BTN_A, BTN_THUMB, BTN_X, BTN_Y, BTN_Z, BTN_TOP, BTN_TOP2 }; -static short tmdc_btn_at[TMDC_BTN] = +static const short tmdc_btn_at[TMDC_BTN] = { BTN_TRIGGER, BTN_THUMB2, BTN_PINKIE, BTN_THUMB, BTN_BASE6, BTN_BASE5, BTN_BASE4, BTN_BASE3, BTN_BASE2, BTN_BASE }; -static struct { +static const struct { int x; int y; } tmdc_hat_to_axis[] = {{ 0, 0}, { 1, 0}, { 0,-1}, {-1, 0}, { 0, 1}}; +static const struct tmdc_model { + unsigned char id; + const char *name; + char abs; + char hats; + char btnc[4]; + char btno[4]; + const signed char *axes; + const short *buttons; +} tmdc_models[] = { + { 1, "ThrustMaster Millenium 3D Inceptor", 6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy }, + { 3, "ThrustMaster Rage 3D Gamepad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad }, + { 4, "ThrustMaster Attack Throttle", 5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at }, + { 8, "ThrustMaster FragMaster", 4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm }, + { 163, "Thrustmaster Fusion GamePad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad }, + { 0, "Unknown %d-axis, %d-button TM device %d", 0, 0, { 0, 0 }, { 0, 0 }, tmdc_abs, tmdc_btn_joy } +}; + + +struct tmdc_port { + struct input_dev *dev; + char name[64]; + char phys[32]; + int mode; + const signed char *abs; + const short *btn; + unsigned char absc; + unsigned char btnc[4]; + unsigned char btno[4]; +}; + struct tmdc { struct gameport *gameport; - struct input_dev dev[2]; + struct tmdc_port *port[2]; +#if 0 + struct input_dev *dev[2]; char name[2][64]; char phys[2][32]; int mode[2]; @@ -102,6 +135,7 @@ struct tmdc { unsigned char absc[2]; unsigned char btnc[2][4]; unsigned char btno[2][4]; +#endif int reads; int bads; unsigned char exists; @@ -156,6 +190,50 @@ static int tmdc_read_packet(struct gameport *gameport, unsigned char data[2][TMD return (i[0] == TMDC_MAX_LENGTH) | ((i[1] == TMDC_MAX_LENGTH) << 1); } +static int tmdc_parse_packet(struct tmdc_port *port, unsigned char *data) +{ + int i, k, l; + + if (data[TMDC_BYTE_ID] != port->mode) + return -1; + + for (i = 0; i < port->absc; i++) { + if (port->abs[i] < 0) + return 0; + + input_report_abs(port->dev, port->abs[i], data[tmdc_byte_a[i]]); + } + + switch (port->mode) { + + case TMDC_MODE_M3DI: + + i = tmdc_byte_d[0]; + input_report_abs(port->dev, ABS_HAT0X, ((data[i] >> 3) & 1) - ((data[i] >> 1) & 1)); + input_report_abs(port->dev, ABS_HAT0Y, ((data[i] >> 2) & 1) - ( data[i] & 1)); + break; + + case TMDC_MODE_AT: + + i = tmdc_byte_a[3]; + input_report_abs(port->dev, ABS_HAT0X, tmdc_hat_to_axis[(data[i] - 141) / 25].x); + input_report_abs(port->dev, ABS_HAT0Y, tmdc_hat_to_axis[(data[i] - 141) / 25].y); + break; + + } + + for (k = l = 0; k < 4; k++) { + for (i = 0; i < port->btnc[k]; i++) + input_report_key(port->dev, port->btn[i + l], + ((data[tmdc_byte_d[k]] >> (i + port->btno[k])) & 1)); + l += port->btnc[k]; + } + + input_sync(port->dev); + + return 0; +} + /* * tmdc_poll() reads and analyzes ThrustMaster joystick data. */ @@ -164,57 +242,21 @@ static void tmdc_poll(struct gameport *gameport) { unsigned char data[2][TMDC_MAX_LENGTH]; struct tmdc *tmdc = gameport_get_drvdata(gameport); - struct input_dev *dev; unsigned char r, bad = 0; - int i, j, k, l; + int i; tmdc->reads++; if ((r = tmdc_read_packet(tmdc->gameport, data)) != tmdc->exists) bad = 1; - else - - for (j = 0; j < 2; j++) - if (r & (1 << j) & tmdc->exists) { - - if (data[j][TMDC_BYTE_ID] != tmdc->mode[j]) { - bad = 1; - continue; - } - - dev = tmdc->dev + j; - - for (i = 0; i < tmdc->absc[j]; i++) { - if (tmdc->abs[j][i] < 0) continue; - input_report_abs(dev, tmdc->abs[j][i], data[j][tmdc_byte_a[i]]); - } - - switch (tmdc->mode[j]) { + else { + for (i = 0; i < 2; i++) { + if (r & (1 << i) & tmdc->exists) { - case TMDC_MODE_M3DI: - - i = tmdc_byte_d[0]; - input_report_abs(dev, ABS_HAT0X, ((data[j][i] >> 3) & 1) - ((data[j][i] >> 1) & 1)); - input_report_abs(dev, ABS_HAT0Y, ((data[j][i] >> 2) & 1) - ( data[j][i] & 1)); - break; - - case TMDC_MODE_AT: - - i = tmdc_byte_a[3]; - input_report_abs(dev, ABS_HAT0X, tmdc_hat_to_axis[(data[j][i] - 141) / 25].x); - input_report_abs(dev, ABS_HAT0Y, tmdc_hat_to_axis[(data[j][i] - 141) / 25].y); - break; - - } - - for (k = l = 0; k < 4; k++) { - for (i = 0; i < tmdc->btnc[j][k]; i++) - input_report_key(dev, tmdc->btn[j][i + l], - ((data[j][tmdc_byte_d[k]] >> (i + tmdc->btno[j][k])) & 1)); - l += tmdc->btnc[j][k]; + if (tmdc_parse_packet(tmdc->port[i], data[i])) + bad = 1; } - - input_sync(dev); + } } tmdc->bads += bad; @@ -235,31 +277,89 @@ static void tmdc_close(struct input_dev *dev) gameport_stop_polling(tmdc->gameport); } +static int tmdc_setup_port(struct tmdc *tmdc, int idx, unsigned char *data) +{ + const struct tmdc_model *model; + struct tmdc_port *port; + struct input_dev *input_dev; + int i, j, b = 0; + + tmdc->port[idx] = port = kzalloc(sizeof (struct tmdc_port), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!port || !input_dev) { + kfree(port); + input_free_device(input_dev); + return -ENOMEM; + } + + port->mode = data[TMDC_BYTE_ID]; + + for (model = tmdc_models; model->id && model->id != port->mode; model++) + /* empty */; + + port->abs = model->axes; + port->btn = model->buttons; + + if (!model->id) { + port->absc = data[TMDC_BYTE_DEF] >> 4; + for (i = 0; i < 4; i++) + port->btnc[i] = i < (data[TMDC_BYTE_DEF] & 0xf) ? 8 : 0; + } else { + port->absc = model->abs; + for (i = 0; i < 4; i++) + port->btnc[i] = model->btnc[i]; + } + + for (i = 0; i < 4; i++) + port->btno[i] = model->btno[i]; + + snprintf(port->name, sizeof(port->name), model->name, + port->absc, (data[TMDC_BYTE_DEF] & 0xf) << 3, port->mode); + snprintf(port->phys, sizeof(port->phys), "%s/input%d", tmdc->gameport->phys, i); + + port->dev = input_dev; + + input_dev->name = port->name; + input_dev->phys = port->phys; + input_dev->id.bustype = BUS_GAMEPORT; + input_dev->id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER; + input_dev->id.product = model->id; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &tmdc->gameport->dev; + input_dev->private = tmdc; + + input_dev->open = tmdc_open; + input_dev->close = tmdc_close; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + + for (i = 0; i < port->absc && i < TMDC_ABS; i++) + if (port->abs[i] >= 0) + input_set_abs_params(input_dev, port->abs[i], 8, 248, 2, 4); + + for (i = 0; i < model->hats && i < TMDC_ABS_HAT; i++) + input_set_abs_params(input_dev, tmdc_abs_hat[i], -1, 1, 0, 0); + + for (i = 0; i < 4; i++) { + for (j = 0; j < port->btnc[i] && j < TMDC_BTN; j++) + set_bit(port->btn[j + b], input_dev->keybit); + b += port->btnc[i]; + } + + input_register_device(port->dev); + + return 0; +} + /* * tmdc_probe() probes for ThrustMaster type joysticks. */ static int tmdc_connect(struct gameport *gameport, struct gameport_driver *drv) { - static struct models { - unsigned char id; - char *name; - char abs; - char hats; - char btnc[4]; - char btno[4]; - signed char *axes; - short *buttons; - } models[] = { { 1, "ThrustMaster Millenium 3D Inceptor", 6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy }, - { 3, "ThrustMaster Rage 3D Gamepad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad }, - { 4, "ThrustMaster Attack Throttle", 5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at }, - { 8, "ThrustMaster FragMaster", 4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm }, - { 163, "Thrustmaster Fusion GamePad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad }, - { 0, "Unknown %d-axis, %d-button TM device %d", 0, 0, { 0, 0 }, { 0, 0 }, tmdc_abs, tmdc_btn_joy }}; - unsigned char data[2][TMDC_MAX_LENGTH]; struct tmdc *tmdc; - int i, j, k, l, m; + int i; int err; if (!(tmdc = kzalloc(sizeof(struct tmdc), GFP_KERNEL))) @@ -281,68 +381,25 @@ static int tmdc_connect(struct gameport *gameport, struct gameport_driver *drv) gameport_set_poll_handler(gameport, tmdc_poll); gameport_set_poll_interval(gameport, 20); - for (j = 0; j < 2; j++) - if (tmdc->exists & (1 << j)) { + for (i = 0; i < 2; i++) { + if (tmdc->exists & (1 << i)) { - tmdc->mode[j] = data[j][TMDC_BYTE_ID]; - - for (m = 0; models[m].id && models[m].id != tmdc->mode[j]; m++); - - tmdc->abs[j] = models[m].axes; - tmdc->btn[j] = models[m].buttons; - - if (!models[m].id) { - models[m].abs = data[j][TMDC_BYTE_DEF] >> 4; - for (k = 0; k < 4; k++) - models[m].btnc[k] = k < (data[j][TMDC_BYTE_DEF] & 0xf) ? 8 : 0; - } - - tmdc->absc[j] = models[m].abs; - for (k = 0; k < 4; k++) { - tmdc->btnc[j][k] = models[m].btnc[k]; - tmdc->btno[j][k] = models[m].btno[k]; - } - - sprintf(tmdc->name[j], models[m].name, models[m].abs, - (data[j][TMDC_BYTE_DEF] & 0xf) << 3, tmdc->mode[j]); - - sprintf(tmdc->phys[j], "%s/input%d", gameport->phys, j); - - tmdc->dev[j].private = tmdc; - tmdc->dev[j].open = tmdc_open; - tmdc->dev[j].close = tmdc_close; - - tmdc->dev[j].name = tmdc->name[j]; - tmdc->dev[j].phys = tmdc->phys[j]; - tmdc->dev[j].id.bustype = BUS_GAMEPORT; - tmdc->dev[j].id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER; - tmdc->dev[j].id.product = models[m].id; - tmdc->dev[j].id.version = 0x0100; - - tmdc->dev[j].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - - for (i = 0; i < models[m].abs && i < TMDC_ABS; i++) - if (tmdc->abs[j][i] >= 0) - input_set_abs_params(&tmdc->dev[j], tmdc->abs[j][i], 8, 248, 2, 4); - - for (i = 0; i < models[m].hats && i < TMDC_ABS_HAT; i++) - input_set_abs_params(&tmdc->dev[j], tmdc_abs_hat[i], -1, 1, 0, 0); - - - for (k = l = 0; k < 4; k++) { - for (i = 0; i < models[m].btnc[k] && i < TMDC_BTN; i++) - set_bit(tmdc->btn[j][i + l], tmdc->dev[j].keybit); - l += models[m].btnc[k]; - } - - input_register_device(tmdc->dev + j); - printk(KERN_INFO "input: %s on %s\n", tmdc->name[j], gameport->phys); + err = tmdc_setup_port(tmdc, i, data[i]); + if (err) + goto fail3; } + } return 0; -fail2: gameport_close(gameport); -fail1: gameport_set_drvdata(gameport, NULL); + fail3: while (--i >= 0) { + if (tmdc->port[i]) { + input_unregister_device(tmdc->port[i]->dev); + kfree(tmdc->port[i]); + } + } + fail2: gameport_close(gameport); + fail1: gameport_set_drvdata(gameport, NULL); kfree(tmdc); return err; } @@ -352,9 +409,12 @@ static void tmdc_disconnect(struct gameport *gameport) struct tmdc *tmdc = gameport_get_drvdata(gameport); int i; - for (i = 0; i < 2; i++) - if (tmdc->exists & (1 << i)) - input_unregister_device(tmdc->dev + i); + for (i = 0; i < 2; i++) { + if (tmdc->port[i]) { + input_unregister_device(tmdc->port[i]->dev); + kfree(tmdc->port[i]); + } + } gameport_close(gameport); gameport_set_drvdata(gameport, NULL); kfree(tmdc); diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index 0c5b9c8297cd..7e9764937d06 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -42,19 +42,21 @@ MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION("TurboGraFX parallel port interface driver"); MODULE_LICENSE("GPL"); -static int tgfx[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 }; -static int tgfx_nargs __initdata = 0; -module_param_array_named(map, tgfx, int, &tgfx_nargs, 0); -MODULE_PARM_DESC(map, "Describes first set of devices (,,,.."); +#define TGFX_MAX_PORTS 3 +#define TGFX_MAX_DEVICES 7 -static int tgfx_2[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 }; -static int tgfx_nargs_2 __initdata = 0; -module_param_array_named(map2, tgfx_2, int, &tgfx_nargs_2, 0); -MODULE_PARM_DESC(map2, "Describes second set of devices"); +struct tgfx_config { + int args[TGFX_MAX_DEVICES + 1]; + int nargs; +}; + +static struct tgfx_config tgfx[TGFX_MAX_PORTS] __initdata; -static int tgfx_3[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 }; -static int tgfx_nargs_3 __initdata = 0; -module_param_array_named(map3, tgfx_3, int, &tgfx_nargs_3, 0); +module_param_array_named(map, tgfx[0].args, int, &tgfx[0].nargs, 0); +MODULE_PARM_DESC(map, "Describes first set of devices (,,,.."); +module_param_array_named(map2, tgfx[1].args, int, &tgfx[1].nargs, 0); +MODULE_PARM_DESC(map2, "Describes second set of devices"); +module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0); MODULE_PARM_DESC(map3, "Describes third set of devices"); __obsolete_setup("tgfx="); @@ -75,17 +77,17 @@ __obsolete_setup("tgfx_3="); #define TGFX_TOP2 0x08 static int tgfx_buttons[] = { BTN_TRIGGER, BTN_THUMB, BTN_THUMB2, BTN_TOP, BTN_TOP2 }; -static char *tgfx_name = "TurboGraFX Multisystem joystick"; static struct tgfx { struct pardevice *pd; struct timer_list timer; - struct input_dev dev[7]; - char phys[7][32]; + struct input_dev *dev[TGFX_MAX_DEVICES]; + char name[TGFX_MAX_DEVICES][64]; + char phys[TGFX_MAX_DEVICES][32]; int sticks; int used; struct semaphore sem; -} *tgfx_base[3]; +} *tgfx_base[TGFX_MAX_PORTS]; /* * tgfx_timer() reads and analyzes TurboGraFX joystick data. @@ -100,7 +102,7 @@ static void tgfx_timer(unsigned long private) for (i = 0; i < 7; i++) if (tgfx->sticks & (1 << i)) { - dev = tgfx->dev + i; + dev = tgfx->dev[i]; parport_write_data(tgfx->pd->port, ~(1 << i)); data1 = parport_read_status(tgfx->pd->port) ^ 0x7f; @@ -153,118 +155,165 @@ static void tgfx_close(struct input_dev *dev) up(&tgfx->sem); } + + /* * tgfx_probe() probes for tg gamepads. */ -static struct tgfx __init *tgfx_probe(int *config, int nargs) +static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs) { struct tgfx *tgfx; + struct input_dev *input_dev; struct parport *pp; + struct pardevice *pd; int i, j; + int err; - if (config[0] < 0) - return NULL; - - if (nargs < 2) { - printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n"); - return NULL; - } - - pp = parport_find_number(config[0]); - + pp = parport_find_number(parport); if (!pp) { printk(KERN_ERR "turbografx.c: no such parport\n"); - return NULL; + err = -EINVAL; + goto err_out; } - if (!(tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL))) { - parport_put_port(pp); - return NULL; + pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); + if (!pd) { + printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n"); + err = -EBUSY; + goto err_put_pp; } - init_MUTEX(&tgfx->sem); - - tgfx->pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL); - - parport_put_port(pp); - - if (!tgfx->pd) { - printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n"); - kfree(tgfx); - return NULL; + tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL); + if (!tgfx) { + printk(KERN_ERR "turbografx.c: Not enough memory\n"); + err = -ENOMEM; + goto err_unreg_pardev; } + init_MUTEX(&tgfx->sem); + tgfx->pd = pd; init_timer(&tgfx->timer); tgfx->timer.data = (long) tgfx; tgfx->timer.function = tgfx_timer; - tgfx->sticks = 0; + for (i = 0; i < n_devs; i++) { + if (n_buttons[i] < 1) + continue; - for (i = 0; i < nargs - 1; i++) - if (config[i+1] > 0 && config[i+1] < 6) { - - tgfx->sticks |= (1 << i); + if (n_buttons[i] > 6) { + printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]); + err = -EINVAL; + goto err_free_devs; + } - tgfx->dev[i].private = tgfx; - tgfx->dev[i].open = tgfx_open; - tgfx->dev[i].close = tgfx_close; + tgfx->dev[i] = input_dev = input_allocate_device(); + if (!input_dev) { + printk(KERN_ERR "turbografx.c: Not enough memory for input device\n"); + err = -ENOMEM; + goto err_free_devs; + } - sprintf(tgfx->phys[i], "%s/input0", tgfx->pd->port->name); + tgfx->sticks |= (1 << i); + snprintf(tgfx->name[i], sizeof(tgfx->name[i]), + "TurboGraFX %d-button Multisystem joystick", n_buttons[i]); + snprintf(tgfx->phys[i], sizeof(tgfx->phys[i]), + "%s/input%d", tgfx->pd->port->name, i); - tgfx->dev[i].name = tgfx_name; - tgfx->dev[i].phys = tgfx->phys[i]; - tgfx->dev[i].id.bustype = BUS_PARPORT; - tgfx->dev[i].id.vendor = 0x0003; - tgfx->dev[i].id.product = config[i+1]; - tgfx->dev[i].id.version = 0x0100; + input_dev->name = tgfx->name[i]; + input_dev->phys = tgfx->phys[i]; + input_dev->id.bustype = BUS_PARPORT; + input_dev->id.vendor = 0x0003; + input_dev->id.product = n_buttons[i]; + input_dev->id.version = 0x0100; - tgfx->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - tgfx->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + input_dev->private = tgfx; + input_dev->open = tgfx_open; + input_dev->close = tgfx_close; - for (j = 0; j < config[i+1]; j++) - set_bit(tgfx_buttons[j], tgfx->dev[i].keybit); + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0); - tgfx->dev[i].absmin[ABS_X] = -1; tgfx->dev[i].absmax[ABS_X] = 1; - tgfx->dev[i].absmin[ABS_Y] = -1; tgfx->dev[i].absmax[ABS_Y] = 1; + for (j = 0; j < n_buttons[i]; j++) + set_bit(tgfx_buttons[j], input_dev->keybit); - input_register_device(tgfx->dev + i); - printk(KERN_INFO "input: %d-button Multisystem joystick on %s\n", - config[i+1], tgfx->pd->port->name); - } + input_register_device(tgfx->dev[i]); + } if (!tgfx->sticks) { - parport_unregister_device(tgfx->pd); - kfree(tgfx); - return NULL; + printk(KERN_ERR "turbografx.c: No valid devices specified\n"); + err = -EINVAL; + goto err_free_tgfx; } return tgfx; + + err_free_devs: + while (--i >= 0) + input_unregister_device(tgfx->dev[i]); + err_free_tgfx: + kfree(tgfx); + err_unreg_pardev: + parport_unregister_device(pd); + err_put_pp: + parport_put_port(pp); + err_out: + return ERR_PTR(err); +} + +static void __exit tgfx_remove(struct tgfx *tgfx) +{ + int i; + + for (i = 0; i < TGFX_MAX_DEVICES; i++) + if (tgfx->dev[i]) + input_unregister_device(tgfx->dev[i]); + parport_unregister_device(tgfx->pd); + kfree(tgfx); } static int __init tgfx_init(void) { - tgfx_base[0] = tgfx_probe(tgfx, tgfx_nargs); - tgfx_base[1] = tgfx_probe(tgfx_2, tgfx_nargs_2); - tgfx_base[2] = tgfx_probe(tgfx_3, tgfx_nargs_3); + int i; + int have_dev = 0; + int err = 0; + + for (i = 0; i < TGFX_MAX_PORTS; i++) { + if (tgfx[i].nargs == 0 || tgfx[i].args[0] < 0) + continue; + + if (tgfx[i].nargs < 2) { + printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n"); + err = -EINVAL; + break; + } + + tgfx_base[i] = tgfx_probe(tgfx[i].args[0], tgfx[i].args + 1, tgfx[i].nargs - 1); + if (IS_ERR(tgfx_base[i])) { + err = PTR_ERR(tgfx_base[i]); + break; + } + + have_dev = 1; + } - if (tgfx_base[0] || tgfx_base[1] || tgfx_base[2]) - return 0; + if (err) { + while (--i >= 0) + tgfx_remove(tgfx_base[i]); + return err; + } - return -ENODEV; + return have_dev ? 0 : -ENODEV; } static void __exit tgfx_exit(void) { - int i, j; + int i; - for (i = 0; i < 3; i++) - if (tgfx_base[i]) { - for (j = 0; j < 7; j++) - if (tgfx_base[i]->sticks & (1 << j)) - input_unregister_device(tgfx_base[i]->dev + j); - parport_unregister_device(tgfx_base[i]->pd); - } + for (i = 0; i < TGFX_MAX_PORTS; i++) + if (tgfx_base[i]) + tgfx_remove(tgfx_base[i]); } module_init(tgfx_init); diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c index 0379bc166525..cd3a1e742a30 100644 --- a/drivers/input/joystick/twidjoy.c +++ b/drivers/input/joystick/twidjoy.c @@ -69,8 +69,6 @@ MODULE_LICENSE("GPL"); #define TWIDJOY_MAX_LENGTH 5 -static char *twidjoy_name = "Handykey Twiddler"; - static struct twidjoy_button_spec { int bitshift; int bitmask; @@ -95,7 +93,7 @@ twidjoy_buttons[] = { */ struct twidjoy { - struct input_dev dev; + struct input_dev *dev; int idx; unsigned char data[TWIDJOY_MAX_LENGTH]; char phys[32]; @@ -108,37 +106,33 @@ struct twidjoy { static void twidjoy_process_packet(struct twidjoy *twidjoy, struct pt_regs *regs) { - if (twidjoy->idx == TWIDJOY_MAX_LENGTH) { - struct input_dev *dev = &twidjoy->dev; - unsigned char *data = twidjoy->data; - struct twidjoy_button_spec *bp; - int button_bits, abs_x, abs_y; - - button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f); + struct input_dev *dev = twidjoy->dev; + unsigned char *data = twidjoy->data; + struct twidjoy_button_spec *bp; + int button_bits, abs_x, abs_y; - input_regs(dev, regs); + button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f); - for (bp = twidjoy_buttons; bp->bitmask; bp++) { - int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift; - int i; + input_regs(dev, regs); - for (i = 0; i < bp->bitmask; i++) - input_report_key(dev, bp->buttons[i], i+1 == value); - } + for (bp = twidjoy_buttons; bp->bitmask; bp++) { + int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift; + int i; - abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2); - if (data[4] & 0x08) abs_x -= 256; + for (i = 0; i < bp->bitmask; i++) + input_report_key(dev, bp->buttons[i], i+1 == value); + } - abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0); - if (data[3] & 0x02) abs_y -= 256; + abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2); + if (data[4] & 0x08) abs_x -= 256; - input_report_abs(dev, ABS_X, -abs_x); - input_report_abs(dev, ABS_Y, +abs_y); + abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0); + if (data[3] & 0x02) abs_y -= 256; - input_sync(dev); - } + input_report_abs(dev, ABS_X, -abs_x); + input_report_abs(dev, ABS_Y, +abs_y); - return; + input_sync(dev); } /* @@ -179,9 +173,9 @@ static void twidjoy_disconnect(struct serio *serio) { struct twidjoy *twidjoy = serio_get_drvdata(serio); - input_unregister_device(&twidjoy->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(twidjoy->dev); kfree(twidjoy); } @@ -195,59 +189,49 @@ static int twidjoy_connect(struct serio *serio, struct serio_driver *drv) { struct twidjoy_button_spec *bp; struct twidjoy *twidjoy; + struct input_dev *input_dev; + int err = -ENOMEM; int i; - int err; - - if (!(twidjoy = kmalloc(sizeof(struct twidjoy), GFP_KERNEL))) - return -ENOMEM; - memset(twidjoy, 0, sizeof(struct twidjoy)); + twidjoy = kzalloc(sizeof(struct twidjoy), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!twidjoy || !input_dev) + goto fail; + twidjoy->dev = input_dev; sprintf(twidjoy->phys, "%s/input0", serio->phys); - init_input_dev(&twidjoy->dev); - twidjoy->dev.name = twidjoy_name; - twidjoy->dev.phys = twidjoy->phys; - twidjoy->dev.id.bustype = BUS_RS232; - twidjoy->dev.id.vendor = SERIO_TWIDJOY; - twidjoy->dev.id.product = 0x0001; - twidjoy->dev.id.version = 0x0100; - twidjoy->dev.dev = &serio->dev; - - twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - - for (bp = twidjoy_buttons; bp->bitmask; bp++) { + input_dev->name = "Handykey Twiddler"; + input_dev->phys = twidjoy->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_TWIDJOY; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = twidjoy; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y); + input_set_abs_params(input_dev, ABS_X, -50, 50, 4, 4); + input_set_abs_params(input_dev, ABS_Y, -50, 50, 4, 4); + + for (bp = twidjoy_buttons; bp->bitmask; bp++) for (i = 0; i < bp->bitmask; i++) - set_bit(bp->buttons[i], twidjoy->dev.keybit); - } - - twidjoy->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y); - - for (i = 0; i < 2; i++) { - twidjoy->dev.absmax[ABS_X+i] = 50; - twidjoy->dev.absmin[ABS_X+i] = -50; - - /* TODO: arndt 20010708: Are these values appropriate? */ - twidjoy->dev.absfuzz[ABS_X+i] = 4; - twidjoy->dev.absflat[ABS_X+i] = 4; - } - - twidjoy->dev.private = twidjoy; + set_bit(bp->buttons[i], input_dev->keybit); serio_set_drvdata(serio, twidjoy); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(twidjoy); - return err; - } - - input_register_device(&twidjoy->dev); - - printk(KERN_INFO "input: %s on %s\n", twidjoy_name, serio->phys); + if (err) + goto fail; + input_register_device(twidjoy->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(twidjoy); + return err; } /* diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c index 6976a219504c..99a642d2a1fe 100644 --- a/drivers/input/joystick/warrior.c +++ b/drivers/input/joystick/warrior.c @@ -47,14 +47,13 @@ MODULE_LICENSE("GPL"); #define WARRIOR_MAX_LENGTH 16 static char warrior_lengths[] = { 0, 4, 12, 3, 4, 4, 0, 0 }; -static char *warrior_name = "Logitech WingMan Warrior"; /* * Per-Warrior data. */ struct warrior { - struct input_dev dev; + struct input_dev *dev; int idx, len; unsigned char data[WARRIOR_MAX_LENGTH]; char phys[32]; @@ -67,7 +66,7 @@ struct warrior { static void warrior_process_packet(struct warrior *warrior, struct pt_regs *regs) { - struct input_dev *dev = &warrior->dev; + struct input_dev *dev = warrior->dev; unsigned char *data = warrior->data; if (!warrior->idx) return; @@ -131,9 +130,9 @@ static void warrior_disconnect(struct serio *serio) { struct warrior *warrior = serio_get_drvdata(serio); - input_unregister_device(&warrior->dev); serio_close(serio); serio_set_drvdata(serio, NULL); + input_unregister_device(warrior->dev); kfree(warrior); } @@ -146,60 +145,48 @@ static void warrior_disconnect(struct serio *serio) static int warrior_connect(struct serio *serio, struct serio_driver *drv) { struct warrior *warrior; - int i; - int err; + struct input_dev *input_dev; + int err = -ENOMEM; - if (!(warrior = kmalloc(sizeof(struct warrior), GFP_KERNEL))) - return -ENOMEM; - - memset(warrior, 0, sizeof(struct warrior)); - - warrior->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS); - warrior->dev.keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2); - warrior->dev.relbit[0] = BIT(REL_DIAL); - warrior->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_THROTTLE) | BIT(ABS_HAT0X) | BIT(ABS_HAT0Y); + warrior = kzalloc(sizeof(struct warrior), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!warrior || !input_dev) + goto fail; + warrior->dev = input_dev; sprintf(warrior->phys, "%s/input0", serio->phys); - init_input_dev(&warrior->dev); - warrior->dev.name = warrior_name; - warrior->dev.phys = warrior->phys; - warrior->dev.id.bustype = BUS_RS232; - warrior->dev.id.vendor = SERIO_WARRIOR; - warrior->dev.id.product = 0x0001; - warrior->dev.id.version = 0x0100; - warrior->dev.dev = &serio->dev; - - for (i = 0; i < 2; i++) { - warrior->dev.absmax[ABS_X+i] = -64; - warrior->dev.absmin[ABS_X+i] = 64; - warrior->dev.absflat[ABS_X+i] = 8; - } - - warrior->dev.absmax[ABS_THROTTLE] = -112; - warrior->dev.absmin[ABS_THROTTLE] = 112; - - for (i = 0; i < 2; i++) { - warrior->dev.absmax[ABS_HAT0X+i] = -1; - warrior->dev.absmin[ABS_HAT0X+i] = 1; - } - - warrior->dev.private = warrior; + input_dev->name = "Logitech WingMan Warrior"; + input_dev->phys = warrior->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_WARRIOR; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + input_dev->private = warrior; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2); + input_dev->relbit[0] = BIT(REL_DIAL); + input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 8); + input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 8); + input_set_abs_params(input_dev, ABS_THROTTLE, -112, 112, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0); serio_set_drvdata(serio, warrior); err = serio_open(serio, drv); - if (err) { - serio_set_drvdata(serio, NULL); - kfree(warrior); - return err; - } - - input_register_device(&warrior->dev); - - printk(KERN_INFO "input: Logitech WingMan Warrior on %s\n", serio->phys); + if (err) + goto fail; + input_register_device(warrior->dev); return 0; + + fail: serio_set_drvdata(serio, NULL); + input_free_device(input_dev); + kfree(warrior); + return err; } /* -- GitLab From 34abf91f4036c01669e298e649b7ba85cadf82eb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:40 -0500 Subject: [PATCH 0580/1519] [PATCH] Input: convert net/bluetooth to dynamic input_dev allocation Input: convert net/bluetooth to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- net/bluetooth/hidp/core.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index de8af5f42394..860444a7fc0f 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -520,7 +520,7 @@ static int hidp_session(void *arg) if (session->input) { input_unregister_device(session->input); - kfree(session->input); + session->input = NULL; } up_write(&hidp_session_sem); @@ -536,6 +536,8 @@ static inline void hidp_setup_input(struct hidp_session *session, struct hidp_co input->private = session; + input->name = "Bluetooth HID Boot Protocol Device"; + input->id.bustype = BUS_BLUETOOTH; input->id.vendor = req->vendor; input->id.product = req->product; @@ -582,16 +584,15 @@ int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, return -ENOTUNIQ; session = kmalloc(sizeof(struct hidp_session), GFP_KERNEL); - if (!session) + if (!session) return -ENOMEM; memset(session, 0, sizeof(struct hidp_session)); - session->input = kmalloc(sizeof(struct input_dev), GFP_KERNEL); + session->input = input_allocate_device(); if (!session->input) { kfree(session); return -ENOMEM; } - memset(session->input, 0, sizeof(struct input_dev)); down_write(&hidp_session_sem); @@ -651,8 +652,10 @@ int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, __hidp_unlink_session(session); - if (session->input) + if (session->input) { input_unregister_device(session->input); + session->input = NULL; /* don't try to free it here */ + } failed: up_write(&hidp_session_sem); -- GitLab From 5ebdcbc2fc4f192c5e685565c9c853a9e01a5eeb Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:49 -0500 Subject: [PATCH 0581/1519] [PATCH] Input: convert sound/ppc/beep to dynamic input_dev allocation Input: convert sound/ppc/beep to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- sound/ppc/beep.c | 66 +++++++++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 29 deletions(-) diff --git a/sound/ppc/beep.c b/sound/ppc/beep.c index 31ea7a4c069f..1681ee13efbb 100644 --- a/sound/ppc/beep.c +++ b/sound/ppc/beep.c @@ -31,14 +31,14 @@ #include "pmac.h" struct snd_pmac_beep { - int running; /* boolean */ - int volume; /* mixer volume: 0-100 */ + int running; /* boolean */ + int volume; /* mixer volume: 0-100 */ int volume_play; /* currently playing volume */ int hz; int nsamples; short *buf; /* allocated wave buffer */ dma_addr_t addr; /* physical address of buffer */ - struct input_dev dev; + struct input_dev *dev; }; /* @@ -212,47 +212,55 @@ static snd_kcontrol_new_t snd_pmac_beep_mixer = { int __init snd_pmac_attach_beep(pmac_t *chip) { pmac_beep_t *beep; - int err; + struct input_dev *input_dev; + void *dmabuf; + int err = -ENOMEM; - beep = kmalloc(sizeof(*beep), GFP_KERNEL); - if (! beep) - return -ENOMEM; - - memset(beep, 0, sizeof(*beep)); - beep->buf = dma_alloc_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4, - &beep->addr, GFP_KERNEL); - - beep->dev.evbit[0] = BIT(EV_SND); - beep->dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); - beep->dev.event = snd_pmac_beep_event; - beep->dev.private = chip; + beep = kzalloc(sizeof(*beep), GFP_KERNEL); + dmabuf = dma_alloc_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4, + &beep->addr, GFP_KERNEL); + input_dev = input_allocate_device(); + if (!beep || !dmabuf || !input_dev) + goto fail; /* FIXME: set more better values */ - beep->dev.name = "PowerMac Beep"; - beep->dev.phys = "powermac/beep"; - beep->dev.id.bustype = BUS_ADB; - beep->dev.id.vendor = 0x001f; - beep->dev.id.product = 0x0001; - beep->dev.id.version = 0x0100; + input_dev->name = "PowerMac Beep"; + input_dev->phys = "powermac/beep"; + input_dev->id.bustype = BUS_ADB; + input_dev->id.vendor = 0x001f; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + + input_dev->evbit[0] = BIT(EV_SND); + input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); + input_dev->event = snd_pmac_beep_event; + input_dev->private = chip; + input_dev->cdev.dev = &chip->pdev->dev; + beep->dev = input_dev; + beep->buf = dmabuf; beep->volume = BEEP_VOLUME; beep->running = 0; - if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_pmac_beep_mixer, chip))) < 0) { - kfree(beep->buf); - kfree(beep); - return err; - } + + err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_pmac_beep_mixer, chip)); + if (err < 0) + goto fail; chip->beep = beep; - input_register_device(&beep->dev); + input_register_device(beep->dev); return 0; + + fail: input_free_device(input_dev); + kfree(dmabuf); + kfree(beep); + return err; } void snd_pmac_detach_beep(pmac_t *chip) { if (chip->beep) { - input_unregister_device(&chip->beep->dev); + input_unregister_device(chip->beep->dev); dma_free_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4, chip->beep->buf, chip->beep->addr); kfree(chip->beep); -- GitLab From 051b2feaa4a92592d160dcb8715cc4a5faaaa52f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:54 -0500 Subject: [PATCH 0582/1519] [PATCH] Input: show sysfs path in /proc/bus/input/devices Input: show sysfs path in /proc/bus/input/devices Show that sysfs and phys path are different objects. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/input.c b/drivers/input/input.c index 0e2e890c0988..ceaed631d49f 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -475,17 +475,21 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int { struct input_dev *dev; struct input_handle *handle; + const char *path; off_t at = 0; int i, len, cnt = 0; list_for_each_entry(dev, &input_dev_list, node) { + path = dev->dynalloc ? kobject_get_path(&dev->cdev.kobj, GFP_KERNEL) : NULL; + len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n", dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version); len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : ""); len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : ""); + len += sprintf(buf + len, "S: Sysfs=%s\n", path ? path : ""); len += sprintf(buf + len, "H: Handlers="); list_for_each_entry(handle, &dev->h_list, d_node) @@ -516,6 +520,8 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int if (cnt >= count) break; } + + kfree(path); } if (&dev->node == &input_dev_list) -- GitLab From 5c1e9a6a6ab2f4c60462cecb7773860a62d86e39 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:55 -0500 Subject: [PATCH 0583/1519] [PATCH] Input: export input_dev data via sysfs attributes Input: export various input device attributes via sysfs The following structure is exported: input0/ |-- name |-- phys |-- uniq |-- id/{bustype|vendor|product|version} `-- capabilities/{ev|abs|rel|key|led|msc|ff|sw} Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 156 +++++++++++++++++++++++++++++++++++------- 1 file changed, 133 insertions(+), 23 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index ceaed631d49f..57fbfd907157 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -434,6 +434,23 @@ static void input_call_hotplug(char *verb, struct input_dev *dev) #endif +static int input_print_bitmap(char *buf, unsigned long *bitmap, int max) +{ + int i; + int len = 0; + + for (i = NBITS(max) - 1; i > 0; i--) + if (bitmap[i]) + break; + + for (; i >= 0; i--) + len += sprintf(buf + len, "%lx%s", bitmap[i], i > 0 ? " " : ""); + + len += sprintf(buf + len, "\n"); + + return len; +} + #ifdef CONFIG_PROC_FS static struct proc_dir_entry *proc_bus_input_dir; @@ -455,20 +472,17 @@ static unsigned int input_devices_poll(struct file *file, poll_table *wait) return 0; } -#define SPRINTF_BIT_B(bit, name, max) \ - do { \ - len += sprintf(buf + len, "B: %s", name); \ - for (i = NBITS(max) - 1; i >= 0; i--) \ - if (dev->bit[i]) break; \ - for (; i >= 0; i--) \ - len += sprintf(buf + len, "%lx ", dev->bit[i]); \ - len += sprintf(buf + len, "\n"); \ +#define SPRINTF_BIT_B(ev, bm) \ + do { \ + len += sprintf(buf + len, "B: %s=", #ev); \ + len += input_print_bitmap(buf + len, \ + dev->bm##bit, ev##_MAX); \ } while (0) -#define SPRINTF_BIT_B2(bit, name, max, ev) \ - do { \ - if (test_bit(ev, dev->evbit)) \ - SPRINTF_BIT_B(bit, name, max); \ +#define SPRINTF_BIT_B2(ev, bm) \ + do { \ + if (test_bit(EV_##ev, dev->evbit)) \ + SPRINTF_BIT_B(ev, bm); \ } while (0) static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data) @@ -478,7 +492,7 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int const char *path; off_t at = 0; - int i, len, cnt = 0; + int len, cnt = 0; list_for_each_entry(dev, &input_dev_list, node) { @@ -497,15 +511,15 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int len += sprintf(buf + len, "\n"); - SPRINTF_BIT_B(evbit, "EV=", EV_MAX); - SPRINTF_BIT_B2(keybit, "KEY=", KEY_MAX, EV_KEY); - SPRINTF_BIT_B2(relbit, "REL=", REL_MAX, EV_REL); - SPRINTF_BIT_B2(absbit, "ABS=", ABS_MAX, EV_ABS); - SPRINTF_BIT_B2(mscbit, "MSC=", MSC_MAX, EV_MSC); - SPRINTF_BIT_B2(ledbit, "LED=", LED_MAX, EV_LED); - SPRINTF_BIT_B2(sndbit, "SND=", SND_MAX, EV_SND); - SPRINTF_BIT_B2(ffbit, "FF=", FF_MAX, EV_FF); - SPRINTF_BIT_B2(swbit, "SW=", SW_MAX, EV_SW); + SPRINTF_BIT_B(EV, ev); + SPRINTF_BIT_B2(KEY, key); + SPRINTF_BIT_B2(REL, rel); + SPRINTF_BIT_B2(ABS, abs); + SPRINTF_BIT_B2(MSC, msc); + SPRINTF_BIT_B2(LED, led); + SPRINTF_BIT_B2(SND, snd); + SPRINTF_BIT_B2(FF, ff); + SPRINTF_BIT_B2(SW, sw); len += sprintf(buf + len, "\n"); @@ -612,6 +626,96 @@ static inline int input_proc_init(void) { return 0; } static inline void input_proc_exit(void) { } #endif +#define INPUT_DEV_STRING_ATTR_SHOW(name) \ +static ssize_t input_dev_show_##name(struct class_device *dev, char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + int retval; \ + \ + retval = down_interruptible(&input_dev->sem); \ + if (retval) \ + return retval; \ + \ + retval = sprintf(buf, "%s\n", input_dev->name ? input_dev->name : ""); \ + \ + up(&input_dev->sem); \ + \ + return retval; \ +} + +INPUT_DEV_STRING_ATTR_SHOW(name); +INPUT_DEV_STRING_ATTR_SHOW(phys); +INPUT_DEV_STRING_ATTR_SHOW(uniq); + +static struct class_device_attribute input_dev_attrs[] = { + __ATTR(name, S_IRUGO, input_dev_show_name, NULL), + __ATTR(phys, S_IRUGO, input_dev_show_phys, NULL), + __ATTR(uniq, S_IRUGO, input_dev_show_uniq, NULL), + __ATTR_NULL +}; + +#define INPUT_DEV_ID_ATTR(name) \ +static ssize_t input_dev_show_id_##name(struct class_device *dev, char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + return sprintf(buf, "%04x\n", input_dev->id.name); \ +} \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL); + +INPUT_DEV_ID_ATTR(bustype); +INPUT_DEV_ID_ATTR(vendor); +INPUT_DEV_ID_ATTR(product); +INPUT_DEV_ID_ATTR(version); + +static struct attribute *input_dev_id_attrs[] = { + &class_device_attr_bustype.attr, + &class_device_attr_vendor.attr, + &class_device_attr_product.attr, + &class_device_attr_version.attr, + NULL +}; + +static struct attribute_group input_dev_id_attr_group = { + .name = "id", + .attrs = input_dev_id_attrs, +}; + +#define INPUT_DEV_CAP_ATTR(ev, bm) \ +static ssize_t input_dev_show_cap_##bm(struct class_device *dev, char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + return input_print_bitmap(buf, input_dev->bm##bit, ev##_MAX); \ +} \ +static CLASS_DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL); + +INPUT_DEV_CAP_ATTR(EV, ev); +INPUT_DEV_CAP_ATTR(KEY, key); +INPUT_DEV_CAP_ATTR(REL, rel); +INPUT_DEV_CAP_ATTR(ABS, abs); +INPUT_DEV_CAP_ATTR(MSC, msc); +INPUT_DEV_CAP_ATTR(LED, led); +INPUT_DEV_CAP_ATTR(SND, snd); +INPUT_DEV_CAP_ATTR(FF, ff); +INPUT_DEV_CAP_ATTR(SW, sw); + +static struct attribute *input_dev_caps_attrs[] = { + &class_device_attr_ev.attr, + &class_device_attr_key.attr, + &class_device_attr_rel.attr, + &class_device_attr_abs.attr, + &class_device_attr_msc.attr, + &class_device_attr_led.attr, + &class_device_attr_snd.attr, + &class_device_attr_ff.attr, + &class_device_attr_sw.attr, + NULL +}; + +static struct attribute_group input_dev_caps_attr_group = { + .name = "capabilities", + .attrs = input_dev_caps_attrs, +}; + static void input_dev_release(struct class_device *class_dev) { struct input_dev *dev = to_input_dev(class_dev); @@ -623,6 +727,7 @@ static void input_dev_release(struct class_device *class_dev) static struct class input_dev_class = { .name = "input_dev", .release = input_dev_release, + .class_dev_attrs = input_dev_attrs, }; struct input_dev *input_allocate_device(void) @@ -660,6 +765,8 @@ static void input_register_classdevice(struct input_dev *dev) kfree(path); class_device_add(&dev->cdev); + sysfs_create_group(&dev->cdev.kobj, &input_dev_id_attr_group); + sysfs_create_group(&dev->cdev.kobj, &input_dev_caps_attr_group); } void input_register_device(struct input_dev *dev) @@ -726,8 +833,11 @@ void input_unregister_device(struct input_dev *dev) list_del_init(&dev->node); - if (dev->dynalloc) + if (dev->dynalloc) { + sysfs_remove_group(&dev->cdev.kobj, &input_dev_caps_attr_group); + sysfs_remove_group(&dev->cdev.kobj, &input_dev_id_attr_group); class_device_unregister(&dev->cdev); + } input_wakeup_procfs_readers(); } -- GitLab From 102040204f1949562406b72007c14a2a241cb0d9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0584/1519] [PATCH] INPUT: register the input class device sooner This is needed so we can actually use the class device within the input handlers. Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index 57fbfd907157..03c2ca404f20 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -795,6 +795,9 @@ void input_register_device(struct input_dev *dev) INIT_LIST_HEAD(&dev->h_list); list_add_tail(&dev->node, &input_dev_list); + if (dev->dynalloc) + input_register_classdevice(dev); + list_for_each_entry(handler, &input_handler_list, node) if (!handler->blacklist || !input_match_device(handler->blacklist, dev)) if ((id = input_match_device(handler->id_table, dev))) @@ -802,9 +805,6 @@ void input_register_device(struct input_dev *dev) input_link_handle(handle); - if (dev->dynalloc) - input_register_classdevice(dev); - #ifdef CONFIG_HOTPLUG input_call_hotplug("add", dev); #endif -- GitLab From 23d50901617c2a8bdef509279a42d2e90f523db9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0585/1519] [PATCH] INPUT: export input_dev_class so that input drivers can use it. Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 3 ++- include/linux/input.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index 03c2ca404f20..b0ede4cc72b7 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -40,6 +40,7 @@ EXPORT_SYMBOL(input_accept_process); EXPORT_SYMBOL(input_flush_device); EXPORT_SYMBOL(input_event); EXPORT_SYMBOL(input_class); +EXPORT_SYMBOL_GPL(input_dev_class); #define INPUT_DEVICES 256 @@ -724,7 +725,7 @@ static void input_dev_release(struct class_device *class_dev) module_put(THIS_MODULE); } -static struct class input_dev_class = { +struct class input_dev_class = { .name = "input_dev", .release = input_dev_release, .class_dev_attrs = input_dev_attrs, diff --git a/include/linux/input.h b/include/linux/input.h index 3defa29a17d3..5de844157fa9 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1075,6 +1075,7 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min } extern struct class *input_class; +extern struct class input_dev_class; #endif #endif -- GitLab From 967ca692161d8c4e894932599592af8d62c0a895 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0586/1519] [PATCH] INPUT: move the input class devices under their new input_dev devices Signed-off-by: Greg Kroah-Hartman --- drivers/input/evdev.c | 6 +++--- drivers/input/joydev.c | 6 +++--- drivers/input/mousedev.c | 10 +++++----- drivers/input/tsdev.c | 6 +++--- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 14ea57f963bb..579041ded4be 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -686,9 +686,9 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct evdev_table[minor] = evdev; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, &dev->cdev, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), - dev->dev, "event%d", minor); + dev->cdev.dev, "event%d", minor); return &evdev->handle; } @@ -698,7 +698,7 @@ static void evdev_disconnect(struct input_handle *handle) struct evdev *evdev = handle->private; struct evdev_list *list; - class_device_destroy(input_class, + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); evdev->exist = 0; diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 40d2b46cbc79..9c17d1add260 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -513,9 +513,9 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev_table[minor] = joydev; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, &dev->cdev, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), - dev->dev, "js%d", minor); + dev->cdev.dev, "js%d", minor); return &joydev->handle; } @@ -525,7 +525,7 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev *joydev = handle->private; struct joydev_list *list; - class_device_destroy(input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); joydev->exist = 0; if (joydev->open) { diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 89c3e496f1ed..5ec6291e967f 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -648,9 +648,9 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru mousedev_table[minor] = mousedev; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, &dev->cdev, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), - dev->dev, "mouse%d", minor); + dev->cdev.dev, "mouse%d", minor); return &mousedev->handle; } @@ -660,7 +660,7 @@ static void mousedev_disconnect(struct input_handle *handle) struct mousedev *mousedev = handle->private; struct mousedev_list *list; - class_device_destroy(input_class, + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); mousedev->exist = 0; @@ -734,7 +734,7 @@ static int __init mousedev_init(void) mousedev_mix.exist = 1; mousedev_mix.minor = MOUSEDEV_MIX; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX @@ -753,7 +753,7 @@ static void __exit mousedev_exit(void) if (psaux_registered) misc_deregister(&psaux_mouse); #endif - class_device_destroy(input_class, + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX)); input_unregister_handler(&mousedev_handler); } diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 2d45e4df4163..0581edb9a560 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -409,9 +409,9 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, tsdev_table[minor] = tsdev; - class_device_create(input_class, NULL, + class_device_create(&input_dev_class, &dev->cdev, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), - dev->dev, "ts%d", minor); + dev->cdev.dev, "ts%d", minor); return &tsdev->handle; } @@ -421,7 +421,7 @@ static void tsdev_disconnect(struct input_handle *handle) struct tsdev *tsdev = handle->private; struct tsdev_list *list; - class_device_destroy(input_class, + class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); tsdev->exist = 0; -- GitLab From 629b77a42c39c8b3c42a8cf5f5680f0406f8d43f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0587/1519] [PATCH] INPUT: Fix oops when accessing sysfs files of nested input devices Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index b0ede4cc72b7..0d570cf92dc2 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -642,17 +642,22 @@ static ssize_t input_dev_show_##name(struct class_device *dev, char *buf) \ up(&input_dev->sem); \ \ return retval; \ -} +} \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL); INPUT_DEV_STRING_ATTR_SHOW(name); INPUT_DEV_STRING_ATTR_SHOW(phys); INPUT_DEV_STRING_ATTR_SHOW(uniq); -static struct class_device_attribute input_dev_attrs[] = { - __ATTR(name, S_IRUGO, input_dev_show_name, NULL), - __ATTR(phys, S_IRUGO, input_dev_show_phys, NULL), - __ATTR(uniq, S_IRUGO, input_dev_show_uniq, NULL), - __ATTR_NULL +static struct attribute *input_dev_attrs[] = { + &class_device_attr_name.attr, + &class_device_attr_phys.attr, + &class_device_attr_uniq.attr, + NULL +}; + +static struct attribute_group input_dev_group = { + .attrs = input_dev_attrs, }; #define INPUT_DEV_ID_ATTR(name) \ @@ -728,7 +733,6 @@ static void input_dev_release(struct class_device *class_dev) struct class input_dev_class = { .name = "input_dev", .release = input_dev_release, - .class_dev_attrs = input_dev_attrs, }; struct input_dev *input_allocate_device(void) @@ -766,6 +770,7 @@ static void input_register_classdevice(struct input_dev *dev) kfree(path); class_device_add(&dev->cdev); + sysfs_create_group(&dev->cdev.kobj, &input_dev_group); sysfs_create_group(&dev->cdev.kobj, &input_dev_id_attr_group); sysfs_create_group(&dev->cdev.kobj, &input_dev_caps_attr_group); } -- GitLab From b0fdfebb205fcbf394c3db39679a766b8fc4f07d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0588/1519] [PATCH] INPUT: remove the input_class structure, as it is unused. Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 18 +++--------------- include/linux/input.h | 1 - 2 files changed, 3 insertions(+), 16 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index 0d570cf92dc2..5c9044dbf00e 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -39,7 +39,6 @@ EXPORT_SYMBOL(input_close_device); EXPORT_SYMBOL(input_accept_process); EXPORT_SYMBOL(input_flush_device); EXPORT_SYMBOL(input_event); -EXPORT_SYMBOL(input_class); EXPORT_SYMBOL_GPL(input_dev_class); #define INPUT_DEVICES 256 @@ -927,8 +926,6 @@ static struct file_operations input_fops = { .open = input_open_file, }; -struct class *input_class; - static int __init input_init(void) { int err; @@ -939,27 +936,19 @@ static int __init input_init(void) return err; } - input_class = class_create(THIS_MODULE, "input"); - if (IS_ERR(input_class)) { - printk(KERN_ERR "input: unable to register input class\n"); - err = PTR_ERR(input_class); - goto fail1; - } - err = input_proc_init(); if (err) - goto fail2; + goto fail1; err = register_chrdev(INPUT_MAJOR, "input", &input_fops); if (err) { printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR); - goto fail3; + goto fail2; } return 0; - fail3: input_proc_exit(); - fail2: class_destroy(input_class); + fail2: input_proc_exit(); fail1: class_unregister(&input_dev_class); return err; } @@ -968,7 +957,6 @@ static void __exit input_exit(void) { input_proc_exit(); unregister_chrdev(INPUT_MAJOR, "input"); - class_destroy(input_class); class_unregister(&input_dev_class); } diff --git a/include/linux/input.h b/include/linux/input.h index 5de844157fa9..256e88755f12 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1074,7 +1074,6 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min dev->absbit[LONG(axis)] |= BIT(axis); } -extern struct class *input_class; extern struct class input_dev_class; #endif -- GitLab From ea9f240bd819f9299703283e5326da606bbb4b05 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0589/1519] [PATCH] INPUT: rename input_dev_class to input_class to be correct. Signed-off-by: Greg Kroah-Hartman --- drivers/input/evdev.c | 4 ++-- drivers/input/input.c | 14 +++++++------- drivers/input/joydev.c | 4 ++-- drivers/input/mousedev.c | 8 ++++---- drivers/input/tsdev.c | 4 ++-- include/linux/input.h | 2 +- 6 files changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 579041ded4be..2a96b260a2a8 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -686,7 +686,7 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct evdev_table[minor] = evdev; - class_device_create(&input_dev_class, &dev->cdev, + class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), dev->cdev.dev, "event%d", minor); @@ -698,7 +698,7 @@ static void evdev_disconnect(struct input_handle *handle) struct evdev *evdev = handle->private; struct evdev_list *list; - class_device_destroy(&input_dev_class, + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); evdev->exist = 0; diff --git a/drivers/input/input.c b/drivers/input/input.c index 5c9044dbf00e..a8f65fa7e17a 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -39,7 +39,7 @@ EXPORT_SYMBOL(input_close_device); EXPORT_SYMBOL(input_accept_process); EXPORT_SYMBOL(input_flush_device); EXPORT_SYMBOL(input_event); -EXPORT_SYMBOL_GPL(input_dev_class); +EXPORT_SYMBOL_GPL(input_class); #define INPUT_DEVICES 256 @@ -729,8 +729,8 @@ static void input_dev_release(struct class_device *class_dev) module_put(THIS_MODULE); } -struct class input_dev_class = { - .name = "input_dev", +struct class input_class = { + .name = "input", .release = input_dev_release, }; @@ -741,7 +741,7 @@ struct input_dev *input_allocate_device(void) dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL); if (dev) { dev->dynalloc = 1; - dev->cdev.class = &input_dev_class; + dev->cdev.class = &input_class; class_device_initialize(&dev->cdev); INIT_LIST_HEAD(&dev->h_list); INIT_LIST_HEAD(&dev->node); @@ -930,7 +930,7 @@ static int __init input_init(void) { int err; - err = class_register(&input_dev_class); + err = class_register(&input_class); if (err) { printk(KERN_ERR "input: unable to register input_dev class\n"); return err; @@ -949,7 +949,7 @@ static int __init input_init(void) return 0; fail2: input_proc_exit(); - fail1: class_unregister(&input_dev_class); + fail1: class_unregister(&input_class); return err; } @@ -957,7 +957,7 @@ static void __exit input_exit(void) { input_proc_exit(); unregister_chrdev(INPUT_MAJOR, "input"); - class_unregister(&input_dev_class); + class_unregister(&input_class); } subsys_initcall(input_init); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 9c17d1add260..25f7eba4761f 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -513,7 +513,7 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev_table[minor] = joydev; - class_device_create(&input_dev_class, &dev->cdev, + class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), dev->cdev.dev, "js%d", minor); @@ -525,7 +525,7 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev *joydev = handle->private; struct joydev_list *list; - class_device_destroy(&input_dev_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); joydev->exist = 0; if (joydev->open) { diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 5ec6291e967f..de2808fc85b3 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -648,7 +648,7 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru mousedev_table[minor] = mousedev; - class_device_create(&input_dev_class, &dev->cdev, + class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), dev->cdev.dev, "mouse%d", minor); @@ -660,7 +660,7 @@ static void mousedev_disconnect(struct input_handle *handle) struct mousedev *mousedev = handle->private; struct mousedev_list *list; - class_device_destroy(&input_dev_class, + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); mousedev->exist = 0; @@ -734,7 +734,7 @@ static int __init mousedev_init(void) mousedev_mix.exist = 1; mousedev_mix.minor = MOUSEDEV_MIX; - class_device_create(&input_dev_class, NULL, + class_device_create(&input_class, NULL, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX @@ -753,7 +753,7 @@ static void __exit mousedev_exit(void) if (psaux_registered) misc_deregister(&psaux_mouse); #endif - class_device_destroy(&input_dev_class, + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX)); input_unregister_handler(&mousedev_handler); } diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 0581edb9a560..75e165736655 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -409,7 +409,7 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, tsdev_table[minor] = tsdev; - class_device_create(&input_dev_class, &dev->cdev, + class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), dev->cdev.dev, "ts%d", minor); @@ -421,7 +421,7 @@ static void tsdev_disconnect(struct input_handle *handle) struct tsdev *tsdev = handle->private; struct tsdev_list *list; - class_device_destroy(&input_dev_class, + class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); tsdev->exist = 0; diff --git a/include/linux/input.h b/include/linux/input.h index 256e88755f12..e3d9c08b5cbe 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1074,7 +1074,7 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min dev->absbit[LONG(axis)] |= BIT(axis); } -extern struct class input_dev_class; +extern struct class input_class; #endif #endif -- GitLab From c9bcd582dfeec845b83bc948a430c9958bf839e6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0590/1519] [PATCH] INPUT: Create symlinks for backwards compatibility This creates symlinks in /sys/class/input/ to the nested class devices to help userspace cope with the nesting. Unfortunatly udev still needs to be updated as it can't handle symlinks properly here :( Signed-off-by: Greg Kroah-Hartman --- drivers/input/evdev.c | 10 ++++++++-- drivers/input/joydev.c | 10 ++++++++-- drivers/input/mousedev.c | 10 ++++++++-- drivers/input/tsdev.c | 10 ++++++++-- 4 files changed, 32 insertions(+), 8 deletions(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 2a96b260a2a8..a4696cd0978c 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -661,6 +661,7 @@ static struct file_operations evdev_fops = { static struct input_handle *evdev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id) { struct evdev *evdev; + struct class_device *cdev; int minor; for (minor = 0; minor < EVDEV_MINORS && evdev_table[minor]; minor++); @@ -686,9 +687,13 @@ static struct input_handle *evdev_connect(struct input_handler *handler, struct evdev_table[minor] = evdev; - class_device_create(&input_class, &dev->cdev, + cdev = class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), - dev->cdev.dev, "event%d", minor); + dev->cdev.dev, evdev->name); + + /* temporary symlink to keep userspace happy */ + sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj, + evdev->name); return &evdev->handle; } @@ -698,6 +703,7 @@ static void evdev_disconnect(struct input_handle *handle) struct evdev *evdev = handle->private; struct evdev_list *list; + sysfs_remove_link(&input_class.subsys.kset.kobj, evdev->name); class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); evdev->exist = 0; diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 25f7eba4761f..20e2972b9204 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -448,6 +448,7 @@ static struct file_operations joydev_fops = { static struct input_handle *joydev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id) { struct joydev *joydev; + struct class_device *cdev; int i, j, t, minor; for (minor = 0; minor < JOYDEV_MINORS && joydev_table[minor]; minor++); @@ -513,9 +514,13 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev_table[minor] = joydev; - class_device_create(&input_class, &dev->cdev, + cdev = class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), - dev->cdev.dev, "js%d", minor); + dev->cdev.dev, joydev->name); + + /* temporary symlink to keep userspace happy */ + sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj, + joydev->name); return &joydev->handle; } @@ -525,6 +530,7 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev *joydev = handle->private; struct joydev_list *list; + sysfs_remove_link(&input_class.subsys.kset.kobj, joydev->name); class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); joydev->exist = 0; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index de2808fc85b3..2d0af44ac4b9 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -620,6 +620,7 @@ static struct file_operations mousedev_fops = { static struct input_handle *mousedev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id) { struct mousedev *mousedev; + struct class_device *cdev; int minor = 0; for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++); @@ -648,9 +649,13 @@ static struct input_handle *mousedev_connect(struct input_handler *handler, stru mousedev_table[minor] = mousedev; - class_device_create(&input_class, &dev->cdev, + cdev = class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), - dev->cdev.dev, "mouse%d", minor); + dev->cdev.dev, mousedev->name); + + /* temporary symlink to keep userspace happy */ + sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj, + mousedev->name); return &mousedev->handle; } @@ -660,6 +665,7 @@ static void mousedev_disconnect(struct input_handle *handle) struct mousedev *mousedev = handle->private; struct mousedev_list *list; + sysfs_remove_link(&input_class.subsys.kset.kobj, mousedev->name); class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); mousedev->exist = 0; diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 75e165736655..ca1547929d62 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -368,6 +368,7 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, struct input_device_id *id) { struct tsdev *tsdev; + struct class_device *cdev; int minor, delta; for (minor = 0; minor < TSDEV_MINORS/2 && tsdev_table[minor]; @@ -409,9 +410,13 @@ static struct input_handle *tsdev_connect(struct input_handler *handler, tsdev_table[minor] = tsdev; - class_device_create(&input_class, &dev->cdev, + cdev = class_device_create(&input_class, &dev->cdev, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), - dev->cdev.dev, "ts%d", minor); + dev->cdev.dev, tsdev->name); + + /* temporary symlink to keep userspace happy */ + sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj, + tsdev->name); return &tsdev->handle; } @@ -421,6 +426,7 @@ static void tsdev_disconnect(struct input_handle *handle) struct tsdev *tsdev = handle->private; struct tsdev_list *list; + sysfs_remove_link(&input_class.subsys.kset.kobj, tsdev->name); class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); tsdev->exist = 0; -- GitLab From a7fadbe10ccf430e7a8add8b45c561d864087343 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 15 Sep 2005 02:01:57 -0500 Subject: [PATCH 0591/1519] [PATCH] input core: remove custom-made hotplug handler Input: remove custom-made hotplug handler Now that all input devices are registered with sysfs we can remove old custom-made hotplug handler and crate a standard one. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 249 ++++++++++++++++++------------------------ 1 file changed, 104 insertions(+), 145 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index a8f65fa7e17a..3b1685ff9d10 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -316,125 +316,7 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st return NULL; } - -/* - * Input hotplugging interface - loading event handlers based on - * device bitfields. - */ - -#ifdef CONFIG_HOTPLUG - -/* - * Input hotplugging invokes what /proc/sys/kernel/hotplug says - * (normally /sbin/hotplug) when input devices get added or removed. - * - * This invokes a user mode policy agent, typically helping to load driver - * or other modules, configure the device, and more. Drivers can provide - * a MODULE_DEVICE_TABLE to help with module loading subtasks. - * - */ - -#define SPRINTF_BIT_A(bit, name, max) \ - do { \ - envp[i++] = scratch; \ - scratch += sprintf(scratch, name); \ - for (j = NBITS(max) - 1; j >= 0; j--) \ - if (dev->bit[j]) break; \ - for (; j >= 0; j--) \ - scratch += sprintf(scratch, "%lx ", dev->bit[j]); \ - scratch++; \ - } while (0) - -#define SPRINTF_BIT_A2(bit, name, max, ev) \ - do { \ - if (test_bit(ev, dev->evbit)) \ - SPRINTF_BIT_A(bit, name, max); \ - } while (0) - -static void input_call_hotplug(char *verb, struct input_dev *dev) -{ - char *argv[3], **envp, *buf, *scratch; - int i = 0, j, value; - - if (!hotplug_path[0]) { - printk(KERN_ERR "input.c: calling hotplug without a hotplug agent defined\n"); - return; - } - if (in_interrupt()) { - printk(KERN_ERR "input.c: calling hotplug from interrupt\n"); - return; - } - if (!current->fs->root) { - printk(KERN_WARNING "input.c: calling hotplug without valid filesystem\n"); - return; - } - if (!(envp = (char **) kmalloc(20 * sizeof(char *), GFP_KERNEL))) { - printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n"); - return; - } - if (!(buf = kmalloc(1024, GFP_KERNEL))) { - kfree (envp); - printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n"); - return; - } - - argv[0] = hotplug_path; - argv[1] = "input"; - argv[2] = NULL; - - envp[i++] = "HOME=/"; - envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; - - scratch = buf; - - envp[i++] = scratch; - scratch += sprintf(scratch, "ACTION=%s", verb) + 1; - - envp[i++] = scratch; - scratch += sprintf(scratch, "PRODUCT=%x/%x/%x/%x", - dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1; - - if (dev->name) { - envp[i++] = scratch; - scratch += sprintf(scratch, "NAME=%s", dev->name) + 1; - } - - if (dev->phys) { - envp[i++] = scratch; - scratch += sprintf(scratch, "PHYS=%s", dev->phys) + 1; - } - - SPRINTF_BIT_A(evbit, "EV=", EV_MAX); - SPRINTF_BIT_A2(keybit, "KEY=", KEY_MAX, EV_KEY); - SPRINTF_BIT_A2(relbit, "REL=", REL_MAX, EV_REL); - SPRINTF_BIT_A2(absbit, "ABS=", ABS_MAX, EV_ABS); - SPRINTF_BIT_A2(mscbit, "MSC=", MSC_MAX, EV_MSC); - SPRINTF_BIT_A2(ledbit, "LED=", LED_MAX, EV_LED); - SPRINTF_BIT_A2(sndbit, "SND=", SND_MAX, EV_SND); - SPRINTF_BIT_A2(ffbit, "FF=", FF_MAX, EV_FF); - SPRINTF_BIT_A2(swbit, "SW=", SW_MAX, EV_SW); - - envp[i++] = NULL; - -#ifdef INPUT_DEBUG - printk(KERN_DEBUG "input.c: calling %s %s [%s %s %s %s %s]\n", - argv[0], argv[1], envp[0], envp[1], envp[2], envp[3], envp[4]); -#endif - - value = call_usermodehelper(argv [0], argv, envp, 0); - - kfree(buf); - kfree(envp); - -#ifdef INPUT_DEBUG - if (value != 0) - printk(KERN_DEBUG "input.c: hotplug returned %d\n", value); -#endif -} - -#endif - -static int input_print_bitmap(char *buf, unsigned long *bitmap, int max) +static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap, int max) { int i; int len = 0; @@ -444,10 +326,8 @@ static int input_print_bitmap(char *buf, unsigned long *bitmap, int max) break; for (; i >= 0; i--) - len += sprintf(buf + len, "%lx%s", bitmap[i], i > 0 ? " " : ""); - - len += sprintf(buf + len, "\n"); - + len += snprintf(buf + len, max(buf_size - len, 0), + "%lx%s", bitmap[i], i > 0 ? " " : ""); return len; } @@ -472,17 +352,18 @@ static unsigned int input_devices_poll(struct file *file, poll_table *wait) return 0; } -#define SPRINTF_BIT_B(ev, bm) \ +#define SPRINTF_BIT(ev, bm) \ do { \ len += sprintf(buf + len, "B: %s=", #ev); \ - len += input_print_bitmap(buf + len, \ + len += input_print_bitmap(buf + len, INT_MAX, \ dev->bm##bit, ev##_MAX); \ + len += sprintf(buf + len, "\n"); \ } while (0) -#define SPRINTF_BIT_B2(ev, bm) \ +#define TEST_AND_SPRINTF_BIT(ev, bm) \ do { \ if (test_bit(EV_##ev, dev->evbit)) \ - SPRINTF_BIT_B(ev, bm); \ + SPRINTF_BIT(ev, bm); \ } while (0) static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data) @@ -511,15 +392,15 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int len += sprintf(buf + len, "\n"); - SPRINTF_BIT_B(EV, ev); - SPRINTF_BIT_B2(KEY, key); - SPRINTF_BIT_B2(REL, rel); - SPRINTF_BIT_B2(ABS, abs); - SPRINTF_BIT_B2(MSC, msc); - SPRINTF_BIT_B2(LED, led); - SPRINTF_BIT_B2(SND, snd); - SPRINTF_BIT_B2(FF, ff); - SPRINTF_BIT_B2(SW, sw); + SPRINTF_BIT(EV, ev); + TEST_AND_SPRINTF_BIT(KEY, key); + TEST_AND_SPRINTF_BIT(REL, rel); + TEST_AND_SPRINTF_BIT(ABS, abs); + TEST_AND_SPRINTF_BIT(MSC, msc); + TEST_AND_SPRINTF_BIT(LED, led); + TEST_AND_SPRINTF_BIT(SND, snd); + TEST_AND_SPRINTF_BIT(FF, ff); + TEST_AND_SPRINTF_BIT(SW, sw); len += sprintf(buf + len, "\n"); @@ -689,7 +570,7 @@ static struct attribute_group input_dev_id_attr_group = { static ssize_t input_dev_show_cap_##bm(struct class_device *dev, char *buf) \ { \ struct input_dev *input_dev = to_input_dev(dev); \ - return input_print_bitmap(buf, input_dev->bm##bit, ev##_MAX); \ + return input_print_bitmap(buf, PAGE_SIZE, input_dev->bm##bit, ev##_MAX);\ } \ static CLASS_DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL); @@ -729,9 +610,95 @@ static void input_dev_release(struct class_device *class_dev) module_put(THIS_MODULE); } +/* + * Input hotplugging interface - loading event handlers based on + * device bitfields. + */ +static int input_add_hotplug_bm_var(char **envp, int num_envp, int *cur_index, + char *buffer, int buffer_size, int *cur_len, + const char *name, unsigned long *bitmap, int max) +{ + if (*cur_index >= num_envp - 1) + return -ENOMEM; + + envp[*cur_index] = buffer + *cur_len; + + *cur_len += snprintf(buffer + *cur_len, max(buffer_size - *cur_len, 0), name); + if (*cur_len > buffer_size) + return -ENOMEM; + + *cur_len += input_print_bitmap(buffer + *cur_len, + max(buffer_size - *cur_len, 0), + bitmap, max) + 1; + if (*cur_len > buffer_size) + return -ENOMEM; + + (*cur_index)++; + return 0; +} + +#define INPUT_ADD_HOTPLUG_VAR(fmt, val...) \ + do { \ + int err = add_hotplug_env_var(envp, num_envp, &i, \ + buffer, buffer_size, &len, \ + fmt, val); \ + if (err) \ + return err; \ + } while (0) + +#define INPUT_ADD_HOTPLUG_BM_VAR(name, bm, max) \ + do { \ + int err = input_add_hotplug_bm_var(envp, num_envp, &i, \ + buffer, buffer_size, &len, \ + name, bm, max); \ + if (err) \ + return err; \ + } while (0) + +static int input_dev_hotplug(struct class_device *cdev, char **envp, + int num_envp, char *buffer, int buffer_size) +{ + struct input_dev *dev = to_input_dev(cdev); + int i = 0; + int len = 0; + + INPUT_ADD_HOTPLUG_VAR("PRODUCT=%x/%x/%x/%x", + dev->id.bustype, dev->id.vendor, + dev->id.product, dev->id.version); + if (dev->name) + INPUT_ADD_HOTPLUG_VAR("NAME=\"%s\"", dev->name); + if (dev->phys) + INPUT_ADD_HOTPLUG_VAR("PHYS=\"%s\"", dev->phys); + if (dev->phys) + INPUT_ADD_HOTPLUG_VAR("UNIQ=\"%s\"", dev->uniq); + + INPUT_ADD_HOTPLUG_BM_VAR("EV=", dev->evbit, EV_MAX); + if (test_bit(EV_KEY, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("KEY=", dev->keybit, KEY_MAX); + if (test_bit(EV_REL, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("REL=", dev->relbit, REL_MAX); + if (test_bit(EV_ABS, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("ABS=", dev->absbit, ABS_MAX); + if (test_bit(EV_MSC, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("MSC=", dev->mscbit, MSC_MAX); + if (test_bit(EV_LED, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("LED=", dev->ledbit, LED_MAX); + if (test_bit(EV_SND, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("SND=", dev->sndbit, SND_MAX); + if (test_bit(EV_FF, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("FF=", dev->ffbit, FF_MAX); + if (test_bit(EV_SW, dev->evbit)) + INPUT_ADD_HOTPLUG_BM_VAR("SW=", dev->swbit, SW_MAX); + + envp[i] = NULL; + + return 0; +} + struct class input_class = { .name = "input", .release = input_dev_release, + .hotplug = input_dev_hotplug, }; struct input_dev *input_allocate_device(void) @@ -810,10 +777,6 @@ void input_register_device(struct input_dev *dev) input_link_handle(handle); -#ifdef CONFIG_HOTPLUG - input_call_hotplug("add", dev); -#endif - input_wakeup_procfs_readers(); } @@ -832,10 +795,6 @@ void input_unregister_device(struct input_dev *dev) handle->handler->disconnect(handle); } -#ifdef CONFIG_HOTPLUG - input_call_hotplug("remove", dev); -#endif - list_del_init(&dev->node); if (dev->dynalloc) { -- GitLab From a1bdc7aad8b557176ccecff1da137ebe3090871e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 13 Oct 2005 17:54:41 +0100 Subject: [PATCH 0592/1519] [PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/base/attribute_container.c | 2 ++ drivers/base/base.h | 12 ++++++++++++ drivers/base/cpu.c | 1 + drivers/base/firmware.c | 3 +++ drivers/base/init.c | 10 ++-------- drivers/base/platform.c | 2 ++ 6 files changed, 22 insertions(+), 8 deletions(-) diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c index 6b2eb6f39b4d..2a7d7ae83e1e 100644 --- a/drivers/base/attribute_container.c +++ b/drivers/base/attribute_container.c @@ -19,6 +19,8 @@ #include #include +#include "base.h" + /* This is a private structure used to tie the classdev and the * container .. it should never be visible outside this file */ struct internal_container { diff --git a/drivers/base/base.h b/drivers/base/base.h index 783752b68a9a..e3b548d46cff 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -1,3 +1,15 @@ + +/* initialisation functions */ + +extern int devices_init(void); +extern int buses_init(void); +extern int classes_init(void); +extern int firmware_init(void); +extern int platform_bus_init(void); +extern int system_bus_init(void); +extern int cpu_dev_init(void); +extern int attribute_container_init(void); + extern int bus_add_device(struct device * dev); extern void bus_remove_device(struct device * dev); diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index b79badd0f158..081c927b1ed8 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -9,6 +9,7 @@ #include #include +#include "base.h" struct sysdev_class cpu_sysdev_class = { set_kset_name("cpu"), diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c index 88ab044932f2..cb1b98ae0d58 100644 --- a/drivers/base/firmware.c +++ b/drivers/base/firmware.c @@ -11,6 +11,9 @@ #include #include #include +#include + +#include "base.h" static decl_subsys(firmware, NULL, NULL); diff --git a/drivers/base/init.c b/drivers/base/init.c index a76ae5a221f3..84e604e25c4f 100644 --- a/drivers/base/init.c +++ b/drivers/base/init.c @@ -10,14 +10,8 @@ #include #include -extern int devices_init(void); -extern int buses_init(void); -extern int classes_init(void); -extern int firmware_init(void); -extern int platform_bus_init(void); -extern int system_bus_init(void); -extern int cpu_dev_init(void); -extern int attribute_container_init(void); +#include "base.h" + /** * driver_init - initialize driver model. * diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 361e204209eb..a1a56ff65b76 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -17,6 +17,8 @@ #include #include +#include "base.h" + struct device platform_bus = { .bus_id = "platform", }; -- GitLab From ad7e14a55ed7648d02a4df8e460e291d80a18c98 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Oct 2005 22:25:43 -0700 Subject: [PATCH 0593/1519] [PATCH] update required version of udev The 071 release is needed to handle the input changes. Older versions will work properly with module-based systems, but not for users that build input stuff into the kernel. Signed-off-by: Greg Kroah-Hartman --- Documentation/Changes | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/Changes b/Documentation/Changes index 27232be26e1a..783ddc3ce4e8 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -65,7 +65,7 @@ o isdn4k-utils 3.1pre1 # isdnctrl 2>&1|grep version o nfs-utils 1.0.5 # showmount --version o procps 3.2.0 # ps --version o oprofile 0.9 # oprofiled --version -o udev 058 # udevinfo -V +o udev 071 # udevinfo -V Kernel compilation ================== -- GitLab From a3a3395e487abc4c1371fe319a8ecbb3913a70a4 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 13 Oct 2005 21:31:08 +0200 Subject: [PATCH 0594/1519] [PATCH] Driver Core: Big kfree NULL check cleanup - Documentation This is the Documentation/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in example code in Documentation/. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/writing_usb_driver.tmpl | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl index 51f3bfb6fb6e..008a341234d0 100644 --- a/Documentation/DocBook/writing_usb_driver.tmpl +++ b/Documentation/DocBook/writing_usb_driver.tmpl @@ -345,8 +345,7 @@ if (!retval) { static inline void skel_delete (struct usb_skel *dev) { - if (dev->bulk_in_buffer != NULL) - kfree (dev->bulk_in_buffer); + kfree (dev->bulk_in_buffer); if (dev->bulk_out_buffer != NULL) usb_buffer_free (dev->udev, dev->bulk_out_size, dev->bulk_out_buffer, -- GitLab From 9480e307cd88ef09ec9294c7d97ebec18e6d2221 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 28 Oct 2005 09:52:56 -0700 Subject: [PATCH 0595/1519] [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/driver.txt | 60 +-------------------------- arch/arm/common/locomo.c | 10 +---- arch/arm/common/sa1111.c | 11 +---- arch/arm/common/scoop.c | 24 +++++------ arch/arm/mach-pxa/corgi_ssp.c | 24 +++++------ arch/arm/mach-sa1100/neponset.c | 30 ++++++-------- drivers/base/platform.c | 20 +++------ drivers/char/s3c2410-rtc.c | 20 ++++----- drivers/char/sonypi.c | 14 +++---- drivers/char/watchdog/s3c2410_wdt.c | 30 ++++++-------- drivers/hwmon/hdaps.c | 6 +-- drivers/i2c/busses/i2c-s3c2410.c | 8 ++-- drivers/i2c/i2c-core.c | 4 +- drivers/ieee1394/nodemgr.c | 4 +- drivers/input/keyboard/corgikbd.c | 22 +++++----- drivers/input/keyboard/spitzkbd.c | 40 +++++++++--------- drivers/input/serio/i8042.c | 13 ++---- drivers/input/touchscreen/corgi_ts.c | 38 ++++++++--------- drivers/media/video/msp3400.c | 8 ++-- drivers/media/video/tda9887.c | 4 +- drivers/media/video/tuner-core.c | 4 +- drivers/mfd/mcp-sa11x0.c | 20 ++++----- drivers/mmc/pxamci.c | 8 ++-- drivers/mmc/wbsd.c | 4 +- drivers/mtd/maps/sa1100-flash.c | 8 ++-- drivers/net/dm9000.c | 8 ++-- drivers/net/irda/sa1100_ir.c | 8 ++-- drivers/net/irda/smsc-ircc2.c | 12 +++--- drivers/net/phy/mdio_bus.c | 20 +++------ drivers/net/smc91x.c | 8 ++-- drivers/pci/pcie/portdrv_core.c | 4 +- drivers/pcmcia/au1000_generic.c | 21 +--------- drivers/pcmcia/hd64465_ss.c | 20 +-------- drivers/pcmcia/i82365.c | 20 +-------- drivers/pcmcia/m32r_cfc.c | 21 +--------- drivers/pcmcia/m32r_pcc.c | 21 +--------- drivers/pcmcia/omap_cf.c | 18 +------- drivers/pcmcia/pxa2xx_base.c | 26 ++++-------- drivers/pcmcia/sa1100_generic.c | 20 +-------- drivers/pcmcia/tcic.c | 20 +-------- drivers/pcmcia/vrc4171_card.c | 24 +---------- drivers/serial/8250.c | 10 +---- drivers/serial/imx.c | 8 ++-- drivers/serial/mpc52xx_uart.c | 8 ++-- drivers/serial/pxa.c | 8 ++-- drivers/serial/s3c2410.c | 9 ++-- drivers/serial/sa1100.c | 8 ++-- drivers/serial/vr41xx_siu.c | 10 +---- drivers/usb/gadget/dummy_hcd.c | 22 ++-------- drivers/usb/gadget/omap_udc.c | 9 +--- drivers/usb/gadget/pxa2xx_udc.c | 17 ++++---- drivers/usb/host/isp116x-hcd.c | 14 ++----- drivers/usb/host/ohci-omap.c | 10 +---- drivers/usb/host/ohci-pxa27x.c | 4 +- drivers/usb/host/sl811-hcd.c | 10 +---- drivers/video/backlight/corgi_bl.c | 10 ++--- drivers/video/imxfb.c | 10 ++--- drivers/video/pxafb.c | 10 ++--- drivers/video/s1d13xxxfb.c | 7 +--- drivers/video/s3c2410fb.c | 27 +++++------- drivers/video/sa1100fb.c | 10 ++--- drivers/video/w100fb.c | 46 ++++++++++---------- include/linux/device.h | 17 +------- sound/arm/pxa2xx-ac97.c | 8 ++-- sound/core/init.c | 14 ++----- sound/pci/ac97/ac97_bus.c | 6 ++- 66 files changed, 325 insertions(+), 692 deletions(-) diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index fabaca1ab1b0..7c26bfae4ba0 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -196,67 +196,11 @@ it into a supported low-power state. int (*suspend) (struct device * dev, pm_message_t state, u32 level); -suspend is called to put the device in a low power state. There are -several stages to successfully suspending a device, which is denoted in -the @level parameter. Breaking the suspend transition into several -stages affords the platform flexibility in performing device power -management based on the requirements of the system and the -user-defined policy. - -SUSPEND_NOTIFY notifies the device that a suspend transition is about -to happen. This happens on system power state transitions to verify -that all devices can successfully suspend. - -A driver may choose to fail on this call, which should cause the -entire suspend transition to fail. A driver should fail only if it -knows that the device will not be able to be resumed properly when the -system wakes up again. It could also fail if it somehow determines it -is in the middle of an operation too important to stop. - -SUSPEND_DISABLE tells the device to stop I/O transactions. When it -stops transactions, or what it should do with unfinished transactions -is a policy of the driver. After this call, the driver should not -accept any other I/O requests. - -SUSPEND_SAVE_STATE tells the device to save the context of the -hardware. This includes any bus-specific hardware state and -device-specific hardware state. A pointer to this saved state can be -stored in the device's saved_state field. - -SUSPEND_POWER_DOWN tells the driver to place the device in the low -power state requested. - -Whether suspend is called with a given level is a policy of the -platform. Some levels may be omitted; drivers must not assume the -reception of any level. However, all levels must be called in the -order above; i.e. notification will always come before disabling; -disabling the device will come before suspending the device. - -All calls are made with interrupts enabled, except for the -SUSPEND_POWER_DOWN level. +suspend is called to put the device in a low power state. int (*resume) (struct device * dev, u32 level); -Resume is used to bring a device back from a low power state. Like the -suspend transition, it happens in several stages. - -RESUME_POWER_ON tells the driver to set the power state to the state -before the suspend call (The device could have already been in a low -power state before the suspend call to put in a lower power state). - -RESUME_RESTORE_STATE tells the driver to restore the state saved by -the SUSPEND_SAVE_STATE suspend call. - -RESUME_ENABLE tells the driver to start accepting I/O transactions -again. Depending on driver policy, the device may already have pending -I/O requests. - -RESUME_POWER_ON is called with interrupts disabled. The other resume -levels are called with interrupts enabled. - -As with the various suspend stages, the driver must not assume that -any other resume calls have been or will be made. Each call should be -self-contained and not dependent on any external state. +Resume is used to bring a device back from a low power state. Attributes diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index e8053d16829b..5cdb4122f057 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -550,15 +550,12 @@ struct locomo_save_data { u16 LCM_SPIMD; }; -static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) +static int locomo_suspend(struct device *dev, pm_message_t state) { struct locomo *lchip = dev_get_drvdata(dev); struct locomo_save_data *save; unsigned long flags; - if (level != SUSPEND_DISABLE) - return 0; - save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL); if (!save) return -ENOMEM; @@ -597,16 +594,13 @@ static int locomo_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int locomo_resume(struct device *dev, u32 level) +static int locomo_resume(struct device *dev) { struct locomo *lchip = dev_get_drvdata(dev); struct locomo_save_data *save; unsigned long r; unsigned long flags; - if (level != RESUME_ENABLE) - return 0; - save = (struct locomo_save_data *) dev->power.saved_state; if (!save) return 0; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 1a47fbf9cbbc..21e2a518ad3a 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -801,7 +801,7 @@ struct sa1111_save_data { #ifdef CONFIG_PM -static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) +static int sa1111_suspend(struct device *dev, pm_message_t state) { struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; @@ -809,9 +809,6 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) unsigned int val; void __iomem *base; - if (level != SUSPEND_DISABLE) - return 0; - save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); if (!save) return -ENOMEM; @@ -856,23 +853,19 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) /* * sa1111_resume - Restore the SA1111 device state. * @dev: device to restore - * @level: resume level * * Restore the general state of the SA1111; clock control and * interrupt controller. Other parts of the SA1111 must be * restored by their respective drivers, and must be called * via LDM after this function. */ -static int sa1111_resume(struct device *dev, u32 level) +static int sa1111_resume(struct device *dev) { struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; - if (level != RESUME_ENABLE) - return 0; - save = (struct sa1111_save_data *)dev->power.saved_state; if (!save) return 0; diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index 9e5245c702de..e8356b76d7c6 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -102,26 +102,24 @@ static void check_scoop_reg(struct scoop_dev *sdev) } #ifdef CONFIG_PM -static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int scoop_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = dev_get_drvdata(dev); + + check_scoop_reg(sdev); + sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); + SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; - check_scoop_reg(sdev); - sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); - SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; - } return 0; } -static int scoop_resume(struct device *dev, uint32_t level) +static int scoop_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct scoop_dev *sdev = dev_get_drvdata(dev); + struct scoop_dev *sdev = dev_get_drvdata(dev); + + check_scoop_reg(sdev); + SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; - check_scoop_reg(sdev); - SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; - } return 0; } #else diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 0ef428287055..136c269db0b7 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -222,24 +222,22 @@ static int corgi_ssp_remove(struct device *dev) return 0; } -static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level) +static int corgi_ssp_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - } + ssp_flush(&corgi_ssp_dev); + ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); + return 0; } -static int corgi_ssp_resume(struct device *dev, u32 level) +static int corgi_ssp_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - } + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ + ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); + ssp_enable(&corgi_ssp_dev); + return 0; } diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index fc061641b7be..7609d69cf1cc 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -178,33 +178,27 @@ static int neponset_probe(struct device *dev) /* * LDM power management. */ -static int neponset_suspend(struct device *dev, pm_message_t state, u32 level) +static int neponset_suspend(struct device *dev, pm_message_t state) { /* * Save state. */ - if (level == SUSPEND_SAVE_STATE || - level == SUSPEND_DISABLE || - level == SUSPEND_POWER_DOWN) { - if (!dev->power.saved_state) - dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); - if (!dev->power.saved_state) - return -ENOMEM; - - *(unsigned int *)dev->power.saved_state = NCR_0; - } + if (!dev->power.saved_state) + dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL); + if (!dev->power.saved_state) + return -ENOMEM; + + *(unsigned int *)dev->power.saved_state = NCR_0; return 0; } -static int neponset_resume(struct device *dev, u32 level) +static int neponset_resume(struct device *dev) { - if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) { - if (dev->power.saved_state) { - NCR_0 = *(unsigned int *)dev->power.saved_state; - kfree(dev->power.saved_state); - dev->power.saved_state = NULL; - } + if (dev->power.saved_state) { + NCR_0 = *(unsigned int *)dev->power.saved_state; + kfree(dev->power.saved_state); + dev->power.saved_state = NULL; } return 0; diff --git a/drivers/base/platform.c b/drivers/base/platform.c index a1a56ff65b76..75ce8711bca5 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -281,13 +281,9 @@ static int platform_suspend(struct device * dev, pm_message_t state) { int ret = 0; - if (dev->driver && dev->driver->suspend) { - ret = dev->driver->suspend(dev, state, SUSPEND_DISABLE); - if (ret == 0) - ret = dev->driver->suspend(dev, state, SUSPEND_SAVE_STATE); - if (ret == 0) - ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN); - } + if (dev->driver && dev->driver->suspend) + ret = dev->driver->suspend(dev, state); + return ret; } @@ -295,13 +291,9 @@ static int platform_resume(struct device * dev) { int ret = 0; - if (dev->driver && dev->driver->resume) { - ret = dev->driver->resume(dev, RESUME_POWER_ON); - if (ret == 0) - ret = dev->driver->resume(dev, RESUME_RESTORE_STATE); - if (ret == 0) - ret = dev->driver->resume(dev, RESUME_ENABLE); - } + if (dev->driver && dev->driver->resume) + ret = dev->driver->resume(dev); + return ret; } diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c index e1a90d9a8756..887b8b2d7882 100644 --- a/drivers/char/s3c2410-rtc.c +++ b/drivers/char/s3c2410-rtc.c @@ -519,30 +519,28 @@ static struct timespec s3c2410_rtc_delta; static int ticnt_save; -static int s3c2410_rtc_suspend(struct device *dev, pm_message_t state, u32 level) +static int s3c2410_rtc_suspend(struct device *dev, pm_message_t state) { struct rtc_time tm; struct timespec time; time.tv_nsec = 0; - if (level == SUSPEND_POWER_DOWN) { - /* save TICNT for anyone using periodic interrupts */ + /* save TICNT for anyone using periodic interrupts */ - ticnt_save = readb(S3C2410_TICNT); + ticnt_save = readb(S3C2410_TICNT); - /* calculate time delta for suspend */ + /* calculate time delta for suspend */ - s3c2410_rtc_gettime(&tm); - rtc_tm_to_time(&tm, &time.tv_sec); - save_time_delta(&s3c2410_rtc_delta, &time); - s3c2410_rtc_enable(dev, 0); - } + s3c2410_rtc_gettime(&tm); + rtc_tm_to_time(&tm, &time.tv_sec); + save_time_delta(&s3c2410_rtc_delta, &time); + s3c2410_rtc_enable(dev, 0); return 0; } -static int s3c2410_rtc_resume(struct device *dev, u32 level) +static int s3c2410_rtc_resume(struct device *dev) { struct rtc_time tm; struct timespec time; diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index a4873684f22c..f86c15587238 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -1167,19 +1167,17 @@ static int sonypi_disable(void) #ifdef CONFIG_PM static int old_camera_power; -static int sonypi_suspend(struct device *dev, pm_message_t state, u32 level) +static int sonypi_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_DISABLE) { - old_camera_power = sonypi_device.camera_power; - sonypi_disable(); - } + old_camera_power = sonypi_device.camera_power; + sonypi_disable(); + return 0; } -static int sonypi_resume(struct device *dev, u32 level) +static int sonypi_resume(struct device *dev) { - if (level == RESUME_ENABLE) - sonypi_enable(old_camera_power); + sonypi_enable(old_camera_power); return 0; } #endif diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index 3625b2601b42..b732020acadb 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -464,32 +464,28 @@ static void s3c2410wdt_shutdown(struct device *dev) static unsigned long wtcon_save; static unsigned long wtdat_save; -static int s3c2410wdt_suspend(struct device *dev, pm_message_t state, u32 level) +static int s3c2410wdt_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - /* Save watchdog state, and turn it off. */ - wtcon_save = readl(wdt_base + S3C2410_WTCON); - wtdat_save = readl(wdt_base + S3C2410_WTDAT); + /* Save watchdog state, and turn it off. */ + wtcon_save = readl(wdt_base + S3C2410_WTCON); + wtdat_save = readl(wdt_base + S3C2410_WTDAT); - /* Note that WTCNT doesn't need to be saved. */ - s3c2410wdt_stop(); - } + /* Note that WTCNT doesn't need to be saved. */ + s3c2410wdt_stop(); return 0; } -static int s3c2410wdt_resume(struct device *dev, u32 level) +static int s3c2410wdt_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - /* Restore watchdog state. */ + /* Restore watchdog state. */ - writel(wtdat_save, wdt_base + S3C2410_WTDAT); - writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */ - writel(wtcon_save, wdt_base + S3C2410_WTCON); + writel(wtdat_save, wdt_base + S3C2410_WTDAT); + writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */ + writel(wtcon_save, wdt_base + S3C2410_WTCON); - printk(KERN_INFO PFX "watchdog %sabled\n", - (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis"); - } + printk(KERN_INFO PFX "watchdog %sabled\n", + (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis"); return 0; } diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 7f0107613827..0015da5668a1 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -296,11 +296,9 @@ static int hdaps_probe(struct device *dev) return 0; } -static int hdaps_resume(struct device *dev, u32 level) +static int hdaps_resume(struct device *dev) { - if (level == RESUME_ENABLE) - return hdaps_device_init(); - return 0; + return hdaps_device_init(); } static struct device_driver hdaps_driver = { diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 73a092fb0e7e..69fa282df2d5 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -879,14 +879,12 @@ static int s3c24xx_i2c_remove(struct device *dev) } #ifdef CONFIG_PM -static int s3c24xx_i2c_resume(struct device *dev, u32 level) +static int s3c24xx_i2c_resume(struct device *dev) { struct s3c24xx_i2c *i2c = dev_get_drvdata(dev); - - if (i2c != NULL && level == RESUME_ENABLE) { - dev_dbg(dev, "resume: level %d\n", level); + + if (i2c != NULL) s3c24xx_i2c_init(i2c); - } return 0; } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index dda472e5e8be..45aa0e54e297 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -48,7 +48,7 @@ static int i2c_bus_suspend(struct device * dev, pm_message_t state) int rc = 0; if (dev->driver && dev->driver->suspend) - rc = dev->driver->suspend(dev,state,0); + rc = dev->driver->suspend(dev, state); return rc; } @@ -57,7 +57,7 @@ static int i2c_bus_resume(struct device * dev) int rc = 0; if (dev->driver && dev->driver->resume) - rc = dev->driver->resume(dev,0); + rc = dev->driver->resume(dev); return rc; } diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 347ece6b583c..7fff5a1d2ea4 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1292,7 +1292,7 @@ static void nodemgr_suspend_ne(struct node_entry *ne) if (ud->device.driver && (!ud->device.driver->suspend || - ud->device.driver->suspend(&ud->device, PMSG_SUSPEND, 0))) + ud->device.driver->suspend(&ud->device, PMSG_SUSPEND))) device_release_driver(&ud->device); } up_write(&ne->device.bus->subsys.rwsem); @@ -1315,7 +1315,7 @@ static void nodemgr_resume_ne(struct node_entry *ne) continue; if (ud->device.driver && ud->device.driver->resume) - ud->device.driver->resume(&ud->device, 0); + ud->device.driver->resume(&ud->device); } up_read(&ne->device.bus->subsys.rwsem); diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index 564bb365f6fc..3210d298b3bc 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c @@ -259,24 +259,22 @@ static void corgikbd_hinge_timer(unsigned long data) } #ifdef CONFIG_PM -static int corgikbd_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int corgikbd_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct corgikbd *corgikbd = dev_get_drvdata(dev); - corgikbd->suspended = 1; - } + struct corgikbd *corgikbd = dev_get_drvdata(dev); + corgikbd->suspended = 1; + return 0; } -static int corgikbd_resume(struct device *dev, uint32_t level) +static int corgikbd_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct corgikbd *corgikbd = dev_get_drvdata(dev); + struct corgikbd *corgikbd = dev_get_drvdata(dev); + + /* Upon resume, ignore the suspend key for a short while */ + corgikbd->suspend_jiffies=jiffies; + corgikbd->suspended = 0; - /* Upon resume, ignore the suspend key for a short while */ - corgikbd->suspend_jiffies=jiffies; - corgikbd->suspended = 0; - } return 0; } #else diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 732fb310e487..cee9c734a048 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -309,34 +309,32 @@ static void spitzkbd_hinge_timer(unsigned long data) } #ifdef CONFIG_PM -static int spitzkbd_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int spitzkbd_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - int i; - struct spitzkbd *spitzkbd = dev_get_drvdata(dev); - spitzkbd->suspended = 1; - - /* Set Strobe lines as inputs - *except* strobe line 0 leave this - enabled so we can detect a power button press for resume */ - for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_IN); - } + int i; + struct spitzkbd *spitzkbd = dev_get_drvdata(dev); + spitzkbd->suspended = 1; + + /* Set Strobe lines as inputs - *except* strobe line 0 leave this + enabled so we can detect a power button press for resume */ + for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++) + pxa_gpio_mode(spitz_strobes[i] | GPIO_IN); + return 0; } -static int spitzkbd_resume(struct device *dev, uint32_t level) +static int spitzkbd_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - int i; - struct spitzkbd *spitzkbd = dev_get_drvdata(dev); + int i; + struct spitzkbd *spitzkbd = dev_get_drvdata(dev); + + for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) + pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); - for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); + /* Upon resume, ignore the suspend key for a short while */ + spitzkbd->suspend_jiffies = jiffies; + spitzkbd->suspended = 0; - /* Upon resume, ignore the suspend key for a short while */ - spitzkbd->suspend_jiffies = jiffies; - spitzkbd->suspended = 0; - } return 0; } #else diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 40d451ce07ff..4bc40f159996 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -911,12 +911,10 @@ static long i8042_panic_blink(long count) * Here we try to restore the original BIOS settings */ -static int i8042_suspend(struct device *dev, pm_message_t state, u32 level) +static int i8042_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_DISABLE) { - del_timer_sync(&i8042_timer); - i8042_controller_reset(); - } + del_timer_sync(&i8042_timer); + i8042_controller_reset(); return 0; } @@ -926,13 +924,10 @@ static int i8042_suspend(struct device *dev, pm_message_t state, u32 level) * Here we try to reset everything back to a state in which suspended */ -static int i8042_resume(struct device *dev, u32 level) +static int i8042_resume(struct device *dev) { int i; - if (level != RESUME_ENABLE) - return 0; - if (i8042_ctl_test()) return -1; diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 40ae183ba1cd..0ba3e6562bff 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -231,34 +231,32 @@ static irqreturn_t ts_interrupt(int irq, void *dev_id, struct pt_regs *regs) } #ifdef CONFIG_PM -static int corgits_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int corgits_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct corgi_ts *corgi_ts = dev_get_drvdata(dev); - - if (corgi_ts->pendown) { - del_timer_sync(&corgi_ts->timer); - corgi_ts->tc.pressure = 0; - new_data(corgi_ts, NULL); - corgi_ts->pendown = 0; - } - corgi_ts->power_mode = PWR_MODE_SUSPEND; + struct corgi_ts *corgi_ts = dev_get_drvdata(dev); - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); + if (corgi_ts->pendown) { + del_timer_sync(&corgi_ts->timer); + corgi_ts->tc.pressure = 0; + new_data(corgi_ts, NULL); + corgi_ts->pendown = 0; } + corgi_ts->power_mode = PWR_MODE_SUSPEND; + + corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); + return 0; } -static int corgits_resume(struct device *dev, uint32_t level) +static int corgits_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct corgi_ts *corgi_ts = dev_get_drvdata(dev); + struct corgi_ts *corgi_ts = dev_get_drvdata(dev); + + corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); + /* Enable Falling Edge */ + set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); + corgi_ts->power_mode = PWR_MODE_ACTIVE; - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - } return 0; } #else diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c index f0d43fc2632f..262890cb20a7 100644 --- a/drivers/media/video/msp3400.c +++ b/drivers/media/video/msp3400.c @@ -1420,8 +1420,8 @@ static int msp_detach(struct i2c_client *client); static int msp_probe(struct i2c_adapter *adap); static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg); -static int msp_suspend(struct device * dev, pm_message_t state, u32 level); -static int msp_resume(struct device * dev, u32 level); +static int msp_suspend(struct device * dev, pm_message_t state); +static int msp_resume(struct device * dev); static void msp_wake_thread(struct i2c_client *client); @@ -1821,7 +1821,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } -static int msp_suspend(struct device * dev, pm_message_t state, u32 level) +static int msp_suspend(struct device * dev, pm_message_t state) { struct i2c_client *c = container_of(dev, struct i2c_client, dev); @@ -1830,7 +1830,7 @@ static int msp_suspend(struct device * dev, pm_message_t state, u32 level) return 0; } -static int msp_resume(struct device * dev, u32 level) +static int msp_resume(struct device * dev) { struct i2c_client *c = container_of(dev, struct i2c_client, dev); diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 0456dda2624d..94053f149ddf 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -784,13 +784,13 @@ tda9887_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } -static int tda9887_suspend(struct device * dev, pm_message_t state, u32 level) +static int tda9887_suspend(struct device * dev, pm_message_t state) { dprintk("tda9887: suspend\n"); return 0; } -static int tda9887_resume(struct device * dev, u32 level) +static int tda9887_resume(struct device * dev) { struct i2c_client *c = container_of(dev, struct i2c_client, dev); struct tda9887 *t = i2c_get_clientdata(c); diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 05572020af4d..ad85bef1c3d5 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -697,7 +697,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } -static int tuner_suspend(struct device *dev, pm_message_t state, u32 level) +static int tuner_suspend(struct device *dev, pm_message_t state) { struct i2c_client *c = container_of (dev, struct i2c_client, dev); struct tuner *t = i2c_get_clientdata (c); @@ -707,7 +707,7 @@ static int tuner_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int tuner_resume(struct device *dev, u32 level) +static int tuner_resume(struct device *dev) { struct i2c_client *c = container_of (dev, struct i2c_client, dev); struct tuner *t = i2c_get_clientdata (c); diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index e9806fbbe696..720e7a326308 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -219,26 +219,24 @@ static int mcp_sa11x0_remove(struct device *dev) return 0; } -static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state, u32 level) +static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state) { struct mcp *mcp = dev_get_drvdata(dev); - if (level == SUSPEND_DISABLE) { - priv(mcp)->mccr0 = Ser4MCCR0; - priv(mcp)->mccr1 = Ser4MCCR1; - Ser4MCCR0 &= ~MCCR0_MCE; - } + priv(mcp)->mccr0 = Ser4MCCR0; + priv(mcp)->mccr1 = Ser4MCCR1; + Ser4MCCR0 &= ~MCCR0_MCE; + return 0; } -static int mcp_sa11x0_resume(struct device *dev, u32 level) +static int mcp_sa11x0_resume(struct device *dev) { struct mcp *mcp = dev_get_drvdata(dev); - if (level == RESUME_RESTORE_STATE) { - Ser4MCCR1 = priv(mcp)->mccr1; - Ser4MCCR0 = priv(mcp)->mccr0; - } + Ser4MCCR1 = priv(mcp)->mccr1; + Ser4MCCR0 = priv(mcp)->mccr0; + return 0; } diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index b53af57074e3..8eba373d42d7 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -571,23 +571,23 @@ static int pxamci_remove(struct device *dev) } #ifdef CONFIG_PM -static int pxamci_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxamci_suspend(struct device *dev, pm_message_t state) { struct mmc_host *mmc = dev_get_drvdata(dev); int ret = 0; - if (mmc && level == SUSPEND_DISABLE) + if (mmc) ret = mmc_suspend_host(mmc, state); return ret; } -static int pxamci_resume(struct device *dev, u32 level) +static int pxamci_resume(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); int ret = 0; - if (mmc && level == RESUME_ENABLE) + if (mmc) ret = mmc_resume_host(mmc); return ret; diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 3cbca7cbea80..25f7ce7b3bc0 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1955,14 +1955,14 @@ static void __devexit wbsd_pnp_remove(struct pnp_dev * dev) */ #ifdef CONFIG_PM -static int wbsd_suspend(struct device *dev, pm_message_t state, u32 level) +static int wbsd_suspend(struct device *dev, pm_message_t state) { DBGF("Not yet supported\n"); return 0; } -static int wbsd_resume(struct device *dev, u32 level) +static int wbsd_resume(struct device *dev) { DBGF("Not yet supported\n"); diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 8dcaa357b4bb..55f21ddec3df 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -402,21 +402,21 @@ static int __exit sa1100_mtd_remove(struct device *dev) } #ifdef CONFIG_PM -static int sa1100_mtd_suspend(struct device *dev, pm_message_t state, u32 level) +static int sa1100_mtd_suspend(struct device *dev, pm_message_t state) { struct sa_info *info = dev_get_drvdata(dev); int ret = 0; - if (info && level == SUSPEND_SAVE_STATE) + if (info) ret = info->mtd->suspend(info->mtd); return ret; } -static int sa1100_mtd_resume(struct device *dev, u32 level) +static int sa1100_mtd_resume(struct device *dev) { struct sa_info *info = dev_get_drvdata(dev); - if (info && level == RESUME_RESTORE_STATE) + if (info) info->mtd->resume(info->mtd); return 0; } diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index e54fc10f6846..abce1f730d00 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -1140,11 +1140,11 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value) } static int -dm9000_drv_suspend(struct device *dev, pm_message_t state, u32 level) +dm9000_drv_suspend(struct device *dev, pm_message_t state) { struct net_device *ndev = dev_get_drvdata(dev); - if (ndev && level == SUSPEND_DISABLE) { + if (ndev) { if (netif_running(ndev)) { netif_device_detach(ndev); dm9000_shutdown(ndev); @@ -1154,12 +1154,12 @@ dm9000_drv_suspend(struct device *dev, pm_message_t state, u32 level) } static int -dm9000_drv_resume(struct device *dev, u32 level) +dm9000_drv_resume(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); board_info_t *db = (board_info_t *) ndev->priv; - if (ndev && level == RESUME_ENABLE) { + if (ndev) { if (netif_running(ndev)) { dm9000_reset(db); diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index 8d34ac60d906..06883309916d 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -291,12 +291,12 @@ static void sa1100_irda_shutdown(struct sa1100_irda *si) /* * Suspend the IrDA interface. */ -static int sa1100_irda_suspend(struct device *_dev, pm_message_t state, u32 level) +static int sa1100_irda_suspend(struct device *_dev, pm_message_t state) { struct net_device *dev = dev_get_drvdata(_dev); struct sa1100_irda *si; - if (!dev || level != SUSPEND_DISABLE) + if (!dev) return 0; si = dev->priv; @@ -316,12 +316,12 @@ static int sa1100_irda_suspend(struct device *_dev, pm_message_t state, u32 leve /* * Resume the IrDA interface. */ -static int sa1100_irda_resume(struct device *_dev, u32 level) +static int sa1100_irda_resume(struct device *_dev) { struct net_device *dev = dev_get_drvdata(_dev); struct sa1100_irda *si; - if (!dev || level != RESUME_ENABLE) + if (!dev) return 0; si = dev->priv; diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index dd89bda1f131..bbac720cca63 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -213,8 +213,8 @@ static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base); /* Power Management */ -static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level); -static int smsc_ircc_resume(struct device *dev, u32 level); +static int smsc_ircc_suspend(struct device *dev, pm_message_t state); +static int smsc_ircc_resume(struct device *dev); static struct device_driver smsc_ircc_driver = { .name = SMSC_IRCC2_DRIVER_NAME, @@ -1646,13 +1646,13 @@ static int smsc_ircc_net_close(struct net_device *dev) return 0; } -static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level) +static int smsc_ircc_suspend(struct device *dev, pm_message_t state) { struct smsc_ircc_cb *self = dev_get_drvdata(dev); IRDA_MESSAGE("%s, Suspending\n", driver_name); - if (level == SUSPEND_DISABLE && !self->io.suspended) { + if (!self->io.suspended) { smsc_ircc_net_close(self->netdev); self->io.suspended = 1; } @@ -1660,11 +1660,11 @@ static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int smsc_ircc_resume(struct device *dev, u32 level) +static int smsc_ircc_resume(struct device *dev) { struct smsc_ircc_cb *self = dev_get_drvdata(dev); - if (level == RESUME_ENABLE && self->io.suspended) { + if (self->io.suspended) { smsc_ircc_net_open(self->netdev); self->io.suspended = 0; diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 90630672703d..ad93b0da87f0 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -133,13 +133,9 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state) int ret = 0; struct device_driver *drv = dev->driver; - if (drv && drv->suspend) { - ret = drv->suspend(dev, state, SUSPEND_DISABLE); - if (ret == 0) - ret = drv->suspend(dev, state, SUSPEND_SAVE_STATE); - if (ret == 0) - ret = drv->suspend(dev, state, SUSPEND_POWER_DOWN); - } + if (drv && drv->suspend) + ret = drv->suspend(dev, state); + return ret; } @@ -148,13 +144,9 @@ static int mdio_bus_resume(struct device * dev) int ret = 0; struct device_driver *drv = dev->driver; - if (drv && drv->resume) { - ret = drv->resume(dev, RESUME_POWER_ON); - if (ret == 0) - ret = drv->resume(dev, RESUME_RESTORE_STATE); - if (ret == 0) - ret = drv->resume(dev, RESUME_ENABLE); - } + if (drv && drv->resume) + ret = drv->resume(dev); + return ret; } diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 1438fdd20826..0ddaa611cc61 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2291,11 +2291,11 @@ static int smc_drv_remove(struct device *dev) return 0; } -static int smc_drv_suspend(struct device *dev, pm_message_t state, u32 level) +static int smc_drv_suspend(struct device *dev, pm_message_t state) { struct net_device *ndev = dev_get_drvdata(dev); - if (ndev && level == SUSPEND_DISABLE) { + if (ndev) { if (netif_running(ndev)) { netif_device_detach(ndev); smc_shutdown(ndev); @@ -2305,12 +2305,12 @@ static int smc_drv_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int smc_drv_resume(struct device *dev, u32 level) +static int smc_drv_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct net_device *ndev = dev_get_drvdata(dev); - if (ndev && level == RESUME_ENABLE) { + if (ndev) { struct smc_local *lp = netdev_priv(ndev); smc_enable_device(pdev); if (netif_running(ndev)) { diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 393e0cee91a9..14f05d22bb70 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -61,7 +61,7 @@ static int pcie_port_remove_service(struct device *dev) static void pcie_port_shutdown_service(struct device *dev) {} -static int pcie_port_suspend_service(struct device *dev, pm_message_t state, u32 level) +static int pcie_port_suspend_service(struct device *dev, pm_message_t state) { struct pcie_device *pciedev; struct pcie_port_service_driver *driver; @@ -76,7 +76,7 @@ static int pcie_port_suspend_service(struct device *dev, pm_message_t state, u32 return 0; } -static int pcie_port_resume_service(struct device *dev, u32 level) +static int pcie_port_resume_service(struct device *dev) { struct pcie_device *pciedev; struct pcie_port_service_driver *driver; diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c index 470ef756252e..d90a634cebf5 100644 --- a/drivers/pcmcia/au1000_generic.c +++ b/drivers/pcmcia/au1000_generic.c @@ -519,30 +519,13 @@ static int au1x00_drv_pcmcia_probe(struct device *dev) } -static int au1x00_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int au1x00_drv_pcmcia_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - - static struct device_driver au1x00_pcmcia_driver = { .probe = au1x00_drv_pcmcia_probe, .remove = au1x00_drv_pcmcia_remove, .name = "au1x00-pcmcia", .bus = &platform_bus_type, - .suspend = au1x00_drv_pcmcia_suspend, - .resume = au1x00_drv_pcmcia_resume + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device au1x00_device = { diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c index 316f8bcc878b..b57a0b98b4d6 100644 --- a/drivers/pcmcia/hd64465_ss.c +++ b/drivers/pcmcia/hd64465_ss.c @@ -844,27 +844,11 @@ static void hs_exit_socket(hs_socket_t *sp) local_irq_restore(flags); } -static int hd64465_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int hd64465_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - static struct device_driver hd64465_driver = { .name = "hd64465-pcmcia", .bus = &platform_bus_type, - .suspend = hd64465_suspend, - .resume = hd64465_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device hd64465_device = { diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index a713015e8228..4a41f67d185d 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -1332,27 +1332,11 @@ static struct pccard_operations pcic_operations = { /*====================================================================*/ -static int i82365_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int i82365_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - static struct device_driver i82365_driver = { .name = "i82365", .bus = &platform_bus_type, - .suspend = i82365_suspend, - .resume = i82365_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device i82365_device = { diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 65f3ee3d4d3c..c6ed70ea4812 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -731,28 +731,11 @@ static struct pccard_operations pcc_operations = { /*====================================================================*/ -static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int m32r_pcc_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - - static struct device_driver pcc_driver = { .name = "cfc", .bus = &platform_bus_type, - .suspend = m32r_pcc_suspend, - .resume = m32r_pcc_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device pcc_device = { diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 7b14d7efd68c..3397ff28de6a 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -695,28 +695,11 @@ static struct pccard_operations pcc_operations = { /*====================================================================*/ -static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int m32r_pcc_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - - static struct device_driver pcc_driver = { .name = "pcc", .bus = &platform_bus_type, - .suspend = m32r_pcc_suspend, - .resume = m32r_pcc_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device pcc_device = { diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index 94be9e51654e..2558c3cc91ec 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -329,27 +329,13 @@ static int __devexit omap_cf_remove(struct device *dev) return 0; } -static int omap_cf_suspend(struct device *dev, pm_message_t mesg, u32 level) -{ - if (level != SUSPEND_SAVE_STATE) - return 0; - return pcmcia_socket_dev_suspend(dev, mesg); -} - -static int omap_cf_resume(struct device *dev, u32 level) -{ - if (level != RESUME_RESTORE_STATE) - return 0; - return pcmcia_socket_dev_resume(dev); -} - static struct device_driver omap_cf_driver = { .name = (char *) driver_name, .bus = &platform_bus_type, .probe = omap_cf_probe, .remove = __devexit_p(omap_cf_remove), - .suspend = omap_cf_suspend, - .resume = omap_cf_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static int __init omap_cf_init(void) diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 325c992f7d8f..c2a12d53f6c7 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -205,32 +205,20 @@ int pxa2xx_drv_pcmcia_probe(struct device *dev) } EXPORT_SYMBOL(pxa2xx_drv_pcmcia_probe); -static int pxa2xx_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxa2xx_drv_pcmcia_resume(struct device *dev) { - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} + struct pcmcia_low_level *ops = dev->platform_data; + int nr = ops ? ops->nr : 0; -static int pxa2xx_drv_pcmcia_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - { - struct pcmcia_low_level *ops = dev->platform_data; - int nr = ops ? ops->nr : 0; - - MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0); - ret = pcmcia_socket_dev_resume(dev); - } - return ret; + MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0); + + return pcmcia_socket_dev_resume(dev); } static struct device_driver pxa2xx_pcmcia_driver = { .probe = pxa2xx_drv_pcmcia_probe, .remove = soc_common_drv_pcmcia_remove, - .suspend = pxa2xx_drv_pcmcia_suspend, + .suspend = pcmcia_socket_dev_suspend, .resume = pxa2xx_drv_pcmcia_resume, .name = "pxa2xx-pcmcia", .bus = &platform_bus_type, diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index d4ed508b38be..b768fa81f043 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -74,29 +74,13 @@ static int sa11x0_drv_pcmcia_probe(struct device *dev) return ret; } -static int sa11x0_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int sa11x0_drv_pcmcia_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - static struct device_driver sa11x0_pcmcia_driver = { .probe = sa11x0_drv_pcmcia_probe, .remove = soc_common_drv_pcmcia_remove, .name = "sa11x0-pcmcia", .bus = &platform_bus_type, - .suspend = sa11x0_drv_pcmcia_suspend, - .resume = sa11x0_drv_pcmcia_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; /* sa11x0_pcmcia_init() diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index d5a61eae6119..f158b67f6610 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -372,27 +372,11 @@ static int __init get_tcic_id(void) /*====================================================================*/ -static int tcic_drv_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int ret = 0; - if (level == SUSPEND_SAVE_STATE) - ret = pcmcia_socket_dev_suspend(dev, state); - return ret; -} - -static int tcic_drv_resume(struct device *dev, u32 level) -{ - int ret = 0; - if (level == RESUME_RESTORE_STATE) - ret = pcmcia_socket_dev_resume(dev); - return ret; -} - static struct device_driver tcic_driver = { .name = "tcic-pcmcia", .bus = &platform_bus_type, - .suspend = tcic_drv_suspend, - .resume = tcic_drv_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static struct platform_device tcic_device = { diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c index 17bb2da6752b..3d2dca675e02 100644 --- a/drivers/pcmcia/vrc4171_card.c +++ b/drivers/pcmcia/vrc4171_card.c @@ -774,31 +774,11 @@ static int __devinit vrc4171_card_setup(char *options) __setup("vrc4171_card=", vrc4171_card_setup); -static int vrc4171_card_suspend(struct device *dev, pm_message_t state, u32 level) -{ - int retval = 0; - - if (level == SUSPEND_SAVE_STATE) - retval = pcmcia_socket_dev_suspend(dev, state); - - return retval; -} - -static int vrc4171_card_resume(struct device *dev, u32 level) -{ - int retval = 0; - - if (level == RESUME_RESTORE_STATE) - retval = pcmcia_socket_dev_resume(dev); - - return retval; -} - static struct device_driver vrc4171_card_driver = { .name = vrc4171_card_name, .bus = &platform_bus_type, - .suspend = vrc4171_card_suspend, - .resume = vrc4171_card_resume, + .suspend = pcmcia_socket_dev_suspend, + .resume = pcmcia_socket_dev_resume, }; static int __devinit vrc4171_card_init(void) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 4d75cdfa0a0a..afb7ddf200e0 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2358,13 +2358,10 @@ static int __devexit serial8250_remove(struct device *dev) return 0; } -static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level) +static int serial8250_suspend(struct device *dev, pm_message_t state) { int i; - if (level != SUSPEND_DISABLE) - return 0; - for (i = 0; i < UART_NR; i++) { struct uart_8250_port *up = &serial8250_ports[i]; @@ -2375,13 +2372,10 @@ static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int serial8250_resume(struct device *dev, u32 level) +static int serial8250_resume(struct device *dev) { int i; - if (level != RESUME_ENABLE) - return 0; - for (i = 0; i < UART_NR; i++) { struct uart_8250_port *up = &serial8250_ports[i]; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index bdb4e454b8b0..5b3933b0c997 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -921,21 +921,21 @@ static struct uart_driver imx_reg = { .cons = IMX_CONSOLE, }; -static int serial_imx_suspend(struct device *_dev, pm_message_t state, u32 level) +static int serial_imx_suspend(struct device *_dev, pm_message_t state) { struct imx_port *sport = dev_get_drvdata(_dev); - if (sport && level == SUSPEND_DISABLE) + if (sport) uart_suspend_port(&imx_reg, &sport->port); return 0; } -static int serial_imx_resume(struct device *_dev, u32 level) +static int serial_imx_resume(struct device *_dev) { struct imx_port *sport = dev_get_drvdata(_dev); - if (sport && level == RESUME_ENABLE) + if (sport) uart_resume_port(&imx_reg, &sport->port); return 0; diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 0585ab27ffde..8a79968f8ce1 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -781,22 +781,22 @@ mpc52xx_uart_remove(struct device *dev) #ifdef CONFIG_PM static int -mpc52xx_uart_suspend(struct device *dev, pm_message_t state, u32 level) +mpc52xx_uart_suspend(struct device *dev, pm_message_t state) { struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); - if (sport && level == SUSPEND_DISABLE) + if (sport) uart_suspend_port(&mpc52xx_uart_driver, port); return 0; } static int -mpc52xx_uart_resume(struct device *dev, u32 level) +mpc52xx_uart_resume(struct device *dev) { struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); - if (port && level == RESUME_ENABLE) + if (port) uart_resume_port(&mpc52xx_uart_driver, port); return 0; diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 90c2a86c421b..7999686d7b47 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -786,21 +786,21 @@ static struct uart_driver serial_pxa_reg = { .cons = PXA_CONSOLE, }; -static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level) +static int serial_pxa_suspend(struct device *_dev, pm_message_t state) { struct uart_pxa_port *sport = dev_get_drvdata(_dev); - if (sport && level == SUSPEND_DISABLE) + if (sport) uart_suspend_port(&serial_pxa_reg, &sport->port); return 0; } -static int serial_pxa_resume(struct device *_dev, u32 level) +static int serial_pxa_resume(struct device *_dev) { struct uart_pxa_port *sport = dev_get_drvdata(_dev); - if (sport && level == RESUME_ENABLE) + if (sport) uart_resume_port(&serial_pxa_reg, &sport->port); return 0; diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 52692aa345ec..06a17dff1a73 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1134,23 +1134,22 @@ static int s3c24xx_serial_remove(struct device *_dev) #ifdef CONFIG_PM -static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state, - u32 level) +static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state) { struct uart_port *port = s3c24xx_dev_to_port(dev); - if (port && level == SUSPEND_DISABLE) + if (port) uart_suspend_port(&s3c24xx_uart_drv, port); return 0; } -static int s3c24xx_serial_resume(struct device *dev, u32 level) +static int s3c24xx_serial_resume(struct device *dev) { struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); - if (port && level == RESUME_ENABLE) { + if (port) { clk_enable(ourport->clk); s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); clk_disable(ourport->clk); diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index dd8aed242357..c4a789e6af44 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -834,21 +834,21 @@ static struct uart_driver sa1100_reg = { .cons = SA1100_CONSOLE, }; -static int sa1100_serial_suspend(struct device *_dev, pm_message_t state, u32 level) +static int sa1100_serial_suspend(struct device *_dev, pm_message_t state) { struct sa1100_port *sport = dev_get_drvdata(_dev); - if (sport && level == SUSPEND_DISABLE) + if (sport) uart_suspend_port(&sa1100_reg, &sport->port); return 0; } -static int sa1100_serial_resume(struct device *_dev, u32 level) +static int sa1100_serial_resume(struct device *_dev) { struct sa1100_port *sport = dev_get_drvdata(_dev); - if (sport && level == RESUME_ENABLE) + if (sport) uart_resume_port(&sa1100_reg, &sport->port); return 0; diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 0c5d65a08f6e..2b623ab0e36e 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -976,14 +976,11 @@ static int siu_remove(struct device *dev) return 0; } -static int siu_suspend(struct device *dev, pm_message_t state, u32 level) +static int siu_suspend(struct device *dev, pm_message_t state) { struct uart_port *port; int i; - if (level != SUSPEND_DISABLE) - return 0; - for (i = 0; i < siu_uart_driver.nr; i++) { port = &siu_uart_ports[i]; if ((port->type == PORT_VR41XX_SIU || @@ -995,14 +992,11 @@ static int siu_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int siu_resume(struct device *dev, u32 level) +static int siu_resume(struct device *dev) { struct uart_port *port; int i; - if (level != RESUME_ENABLE) - return 0; - for (i = 0; i < siu_uart_driver.nr; i++) { port = &siu_uart_ports[i]; if ((port->type == PORT_VR41XX_SIU || diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 583db7c38cf1..f2bdf4e1eb80 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -935,14 +935,10 @@ static int dummy_udc_remove (struct device *dev) return 0; } -static int dummy_udc_suspend (struct device *dev, pm_message_t state, - u32 level) +static int dummy_udc_suspend (struct device *dev, pm_message_t state) { struct dummy *dum = dev_get_drvdata(dev); - if (level != SUSPEND_DISABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 1; @@ -954,13 +950,10 @@ static int dummy_udc_suspend (struct device *dev, pm_message_t state, return 0; } -static int dummy_udc_resume (struct device *dev, u32 level) +static int dummy_udc_resume (struct device *dev) { struct dummy *dum = dev_get_drvdata(dev); - if (level != RESUME_ENABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 0; @@ -1936,14 +1929,10 @@ static int dummy_hcd_remove (struct device *dev) return 0; } -static int dummy_hcd_suspend (struct device *dev, pm_message_t state, - u32 level) +static int dummy_hcd_suspend (struct device *dev, pm_message_t state) { struct usb_hcd *hcd; - if (level != SUSPEND_DISABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); hcd = dev_get_drvdata (dev); @@ -1958,13 +1947,10 @@ static int dummy_hcd_suspend (struct device *dev, pm_message_t state, return 0; } -static int dummy_hcd_resume (struct device *dev, u32 level) +static int dummy_hcd_resume (struct device *dev) { struct usb_hcd *hcd; - if (level != RESUME_ENABLE) - return 0; - dev_dbg (dev, "%s\n", __FUNCTION__); hcd = dev_get_drvdata (dev); hcd->state = HC_STATE_RUNNING; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index ff5533e69560..58b3ec97fb9a 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -2909,12 +2909,10 @@ static int __exit omap_udc_remove(struct device *dev) * may involve talking to an external transceiver (e.g. isp1301). */ -static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level) +static int omap_udc_suspend(struct device *dev, pm_message_t message) { u32 devstat; - if (level != SUSPEND_POWER_DOWN) - return 0; devstat = UDC_DEVSTAT_REG; /* we're requesting 48 MHz clock if the pullup is enabled @@ -2931,11 +2929,8 @@ static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level) return 0; } -static int omap_udc_resume(struct device *dev, u32 level) +static int omap_udc_resume(struct device *dev) { - if (level != RESUME_POWER_ON) - return 0; - DBG("resume + wakeup/SRP\n"); omap_pullup(&udc->gadget, 1); diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 73f8c9404156..00dfe42d7a86 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -2602,24 +2602,23 @@ static int __exit pxa2xx_udc_remove(struct device *_dev) * VBUS IRQs should probably be ignored so that the PXA device just acts * "dead" to USB hosts until system resume. */ -static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state) { struct pxa2xx_udc *udc = dev_get_drvdata(dev); - if (level == SUSPEND_POWER_DOWN) { - if (!udc->mach->udc_command) - WARN("USB host won't detect disconnect!\n"); - pullup(udc, 0); - } + if (!udc->mach->udc_command) + WARN("USB host won't detect disconnect!\n"); + pullup(udc, 0); + return 0; } -static int pxa2xx_udc_resume(struct device *dev, u32 level) +static int pxa2xx_udc_resume(struct device *dev) { struct pxa2xx_udc *udc = dev_get_drvdata(dev); - if (level == RESUME_POWER_ON) - pullup(udc, 1); + pullup(udc, 1); + return 0; } diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index e142056b0d2c..0f6183a829c4 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1774,15 +1774,12 @@ static int __init isp116x_probe(struct device *dev) /* Suspend of platform device */ -static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase) +static int isp116x_suspend(struct device *dev, pm_message_t state) { int ret = 0; struct usb_hcd *hcd = dev_get_drvdata(dev); - VDBG("%s: state %x, phase %x\n", __func__, state, phase); - - if (phase != SUSPEND_DISABLE && phase != SUSPEND_POWER_DOWN) - return 0; + VDBG("%s: state %x\n", __func__, state); ret = usb_suspend_device(hcd->self.root_hub, state); if (!ret) { @@ -1797,15 +1794,12 @@ static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase) /* Resume platform device */ -static int isp116x_resume(struct device *dev, u32 phase) +static int isp116x_resume(struct device *dev) { int ret = 0; struct usb_hcd *hcd = dev_get_drvdata(dev); - VDBG("%s: state %x, phase %x\n", __func__, dev->power.power_state, - phase); - if (phase != RESUME_POWER_ON) - return 0; + VDBG("%s: state %x\n", __func__, dev->power.power_state); ret = usb_resume_device(hcd->self.root_hub); if (!ret) { diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index d8f3ba7ad52e..a574216625a0 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -455,14 +455,11 @@ static int ohci_hcd_omap_drv_remove(struct device *dev) #ifdef CONFIG_PM -static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level) +static int ohci_omap_suspend(struct device *dev, pm_message_t message) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); int status = -EINVAL; - if (level != SUSPEND_POWER_DOWN) - return 0; - down(&ohci_to_hcd(ohci)->self.root_hub->serialize); status = ohci_hub_suspend(ohci_to_hcd(ohci)); if (status == 0) { @@ -476,14 +473,11 @@ static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level return status; } -static int ohci_omap_resume(struct device *dev, u32 level) +static int ohci_omap_resume(struct device *dev) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); int status = 0; - if (level != RESUME_POWER_ON) - return 0; - if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 2fdb262d4726..f042261ecb8e 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -309,7 +309,7 @@ static int ohci_hcd_pxa27x_drv_remove(struct device *dev) return 0; } -static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u32 level) +static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state) { // struct platform_device *pdev = to_platform_device(dev); // struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -318,7 +318,7 @@ static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u return 0; } -static int ohci_hcd_pxa27x_drv_resume(struct device *dev, u32 level) +static int ohci_hcd_pxa27x_drv_resume(struct device *dev) { // struct platform_device *pdev = to_platform_device(dev); // struct usb_hcd *hcd = dev_get_drvdata(dev); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d42a15d10a46..03cf6accfe64 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1784,15 +1784,12 @@ sl811h_probe(struct device *dev) */ static int -sl811h_suspend(struct device *dev, pm_message_t state, u32 phase) +sl811h_suspend(struct device *dev, pm_message_t state) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); int retval = 0; - if (phase != SUSPEND_POWER_DOWN) - return retval; - if (state.event == PM_EVENT_FREEZE) retval = sl811h_hub_suspend(hcd); else if (state.event == PM_EVENT_SUSPEND) @@ -1803,14 +1800,11 @@ sl811h_suspend(struct device *dev, pm_message_t state, u32 phase) } static int -sl811h_resume(struct device *dev, u32 phase) +sl811h_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct sl811 *sl811 = hcd_to_sl811(hcd); - if (phase != RESUME_POWER_ON) - return 0; - /* with no "check to see if VBUS is still powered" board hook, * let's assume it'd only be powered to enable remote wakeup. */ diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c index 3c72c627e65e..1991fdb32dfb 100644 --- a/drivers/video/backlight/corgi_bl.c +++ b/drivers/video/backlight/corgi_bl.c @@ -73,17 +73,15 @@ static void corgibl_blank(int blank) } #ifdef CONFIG_PM -static int corgibl_suspend(struct device *dev, pm_message_t state, u32 level) +static int corgibl_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) - corgibl_blank(FB_BLANK_POWERDOWN); + corgibl_blank(FB_BLANK_POWERDOWN); return 0; } -static int corgibl_resume(struct device *dev, u32 level) +static int corgibl_resume(struct device *dev) { - if (level == RESUME_POWER_ON) - corgibl_blank(FB_BLANK_UNBLANK); + corgibl_blank(FB_BLANK_UNBLANK); return 0; } #else diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 1d54d3d6960b..0b9301facbd3 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -424,23 +424,21 @@ static void imxfb_setup_gpio(struct imxfb_info *fbi) * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int imxfb_suspend(struct device *dev, pm_message_t state, u32 level) +static int imxfb_suspend(struct device *dev, pm_message_t state) { struct imxfb_info *fbi = dev_get_drvdata(dev); pr_debug("%s\n",__FUNCTION__); - if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) - imxfb_disable_controller(fbi); + imxfb_disable_controller(fbi); return 0; } -static int imxfb_resume(struct device *dev, u32 level) +static int imxfb_resume(struct device *dev) { struct imxfb_info *fbi = dev_get_drvdata(dev); pr_debug("%s\n",__FUNCTION__); - if (level == RESUME_ENABLE) - imxfb_enable_controller(fbi); + imxfb_enable_controller(fbi); return 0; } #else diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 194eed0a238c..6206da9dd5da 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -981,21 +981,19 @@ pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data) * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int pxafb_suspend(struct device *dev, pm_message_t state, u32 level) +static int pxafb_suspend(struct device *dev, pm_message_t state) { struct pxafb_info *fbi = dev_get_drvdata(dev); - if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) - set_ctrlr_state(fbi, C_DISABLE_PM); + set_ctrlr_state(fbi, C_DISABLE_PM); return 0; } -static int pxafb_resume(struct device *dev, u32 level) +static int pxafb_resume(struct device *dev) { struct pxafb_info *fbi = dev_get_drvdata(dev); - if (level == RESUME_ENABLE) - set_ctrlr_state(fbi, C_ENABLE_PM); + set_ctrlr_state(fbi, C_ENABLE_PM); return 0; } #else diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c index fa98d91c42eb..cb2f7a1de947 100644 --- a/drivers/video/s1d13xxxfb.c +++ b/drivers/video/s1d13xxxfb.c @@ -655,7 +655,7 @@ s1d13xxxfb_probe(struct device *dev) } #ifdef CONFIG_PM -static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state, u32 level) +static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state) { struct fb_info *info = dev_get_drvdata(dev); struct s1d13xxxfb_par *s1dfb = info->par; @@ -702,15 +702,12 @@ static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state, u32 level) return 0; } -static int s1d13xxxfb_resume(struct device *dev, u32 level) +static int s1d13xxxfb_resume(struct device *dev) { struct fb_info *info = dev_get_drvdata(dev); struct s1d13xxxfb_par *s1dfb = info->par; struct s1d13xxxfb_pdata *pdata = NULL; - if (level != RESUME_ENABLE) - return 0; - /* awaken the chip */ s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10); diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 5ab79afb53b7..3862d3cb1fb2 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -847,37 +847,32 @@ static int s3c2410fb_remove(struct device *dev) /* suspend and resume support for the lcd controller */ -static int s3c2410fb_suspend(struct device *dev, pm_message_t state, u32 level) +static int s3c2410fb_suspend(struct device *dev, pm_message_t state) { struct fb_info *fbinfo = dev_get_drvdata(dev); struct s3c2410fb_info *info = fbinfo->par; - if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) { - s3c2410fb_stop_lcd(); + s3c2410fb_stop_lcd(); - /* sleep before disabling the clock, we need to ensure - * the LCD DMA engine is not going to get back on the bus - * before the clock goes off again (bjd) */ + /* sleep before disabling the clock, we need to ensure + * the LCD DMA engine is not going to get back on the bus + * before the clock goes off again (bjd) */ - msleep(1); - clk_disable(info->clk); - } + msleep(1); + clk_disable(info->clk); return 0; } -static int s3c2410fb_resume(struct device *dev, u32 level) +static int s3c2410fb_resume(struct device *dev) { struct fb_info *fbinfo = dev_get_drvdata(dev); struct s3c2410fb_info *info = fbinfo->par; - if (level == RESUME_ENABLE) { - clk_enable(info->clk); - msleep(1); - - s3c2410fb_init_registers(info); + clk_enable(info->clk); + msleep(1); - } + s3c2410fb_init_registers(info); return 0; } diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 8000890e4271..78e5f194b0df 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -1309,21 +1309,19 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val, * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int sa1100fb_suspend(struct device *dev, pm_message_t state, u32 level) +static int sa1100fb_suspend(struct device *dev, pm_message_t state) { struct sa1100fb_info *fbi = dev_get_drvdata(dev); - if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) - set_ctrlr_state(fbi, C_DISABLE_PM); + set_ctrlr_state(fbi, C_DISABLE_PM); return 0; } -static int sa1100fb_resume(struct device *dev, u32 level) +static int sa1100fb_resume(struct device *dev) { struct sa1100fb_info *fbi = dev_get_drvdata(dev); - if (level == RESUME_ENABLE) - set_ctrlr_state(fbi, C_ENABLE_PM); + set_ctrlr_state(fbi, C_ENABLE_PM); return 0; } #else diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index 0030c071da8f..752bf88906a9 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -438,36 +438,34 @@ static void w100fb_restore_vidmem(struct w100fb_par *par) } } -static int w100fb_suspend(struct device *dev, pm_message_t state, uint32_t level) +static int w100fb_suspend(struct device *dev, pm_message_t state) { - if (level == SUSPEND_POWER_DOWN) { - struct fb_info *info = dev_get_drvdata(dev); - struct w100fb_par *par=info->par; - struct w100_tg_info *tg = par->mach->tg; - - w100fb_save_vidmem(par); - if(tg && tg->suspend) - tg->suspend(par); - w100_suspend(W100_SUSPEND_ALL); - par->blanked = 1; - } + struct fb_info *info = dev_get_drvdata(dev); + struct w100fb_par *par=info->par; + struct w100_tg_info *tg = par->mach->tg; + + w100fb_save_vidmem(par); + if(tg && tg->suspend) + tg->suspend(par); + w100_suspend(W100_SUSPEND_ALL); + par->blanked = 1; + return 0; } -static int w100fb_resume(struct device *dev, uint32_t level) +static int w100fb_resume(struct device *dev) { - if (level == RESUME_POWER_ON) { - struct fb_info *info = dev_get_drvdata(dev); - struct w100fb_par *par=info->par; - struct w100_tg_info *tg = par->mach->tg; + struct fb_info *info = dev_get_drvdata(dev); + struct w100fb_par *par=info->par; + struct w100_tg_info *tg = par->mach->tg; + + w100_hw_init(par); + w100fb_activate_var(par); + w100fb_restore_vidmem(par); + if(tg && tg->resume) + tg->resume(par); + par->blanked = 0; - w100_hw_init(par); - w100fb_activate_var(par); - w100fb_restore_vidmem(par); - if(tg && tg->resume) - tg->resume(par); - par->blanked = 0; - } return 0; } #else diff --git a/include/linux/device.h b/include/linux/device.h index 10ab7807f8ea..a9e72ac3fb9f 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -28,19 +28,6 @@ #define BUS_ID_SIZE KOBJ_NAME_LEN -enum { - SUSPEND_NOTIFY, - SUSPEND_SAVE_STATE, - SUSPEND_DISABLE, - SUSPEND_POWER_DOWN, -}; - -enum { - RESUME_POWER_ON, - RESUME_RESTORE_STATE, - RESUME_ENABLE, -}; - struct device; struct device_driver; struct class; @@ -115,8 +102,8 @@ struct device_driver { int (*probe) (struct device * dev); int (*remove) (struct device * dev); void (*shutdown) (struct device * dev); - int (*suspend) (struct device * dev, pm_message_t state, u32 level); - int (*resume) (struct device * dev, u32 level); + int (*suspend) (struct device * dev, pm_message_t state); + int (*resume) (struct device * dev); }; diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 38b20efc9c0b..877bb00d3295 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -275,23 +275,23 @@ static int pxa2xx_ac97_do_resume(snd_card_t *card) return 0; } -static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state, u32 level) +static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state) { snd_card_t *card = dev_get_drvdata(_dev); int ret = 0; - if (card && level == SUSPEND_DISABLE) + if (card) ret = pxa2xx_ac97_do_suspend(card, PMSG_SUSPEND); return ret; } -static int pxa2xx_ac97_resume(struct device *_dev, u32 level) +static int pxa2xx_ac97_resume(struct device *_dev) { snd_card_t *card = dev_get_drvdata(_dev); int ret = 0; - if (card && level == RESUME_ENABLE) + if (card) ret = pxa2xx_ac97_do_resume(card); return ret; diff --git a/sound/core/init.c b/sound/core/init.c index c72a79115cca..59202de1d2ce 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -676,8 +676,8 @@ struct snd_generic_device { #define SND_GENERIC_NAME "snd_generic" #ifdef CONFIG_PM -static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level); -static int snd_generic_resume(struct device *dev, u32 level); +static int snd_generic_suspend(struct device *dev, pm_message_t state); +static int snd_generic_resume(struct device *dev); #endif /* initialized in sound.c */ @@ -818,13 +818,10 @@ int snd_card_set_pm_callback(snd_card_t *card, #ifdef CONFIG_SND_GENERIC_DRIVER /* suspend/resume callbacks for snd_generic platform device */ -static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level) +static int snd_generic_suspend(struct device *dev, pm_message_t state) { snd_card_t *card; - if (level != SUSPEND_DISABLE) - return 0; - card = get_snd_generic_card(dev); if (card->power_state == SNDRV_CTL_POWER_D3hot) return 0; @@ -834,13 +831,10 @@ static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level return 0; } -static int snd_generic_resume(struct device *dev, u32 level) +static int snd_generic_resume(struct device *dev) { snd_card_t *card; - if (level != RESUME_ENABLE) - return 0; - card = get_snd_generic_card(dev); if (card->power_state == SNDRV_CTL_POWER_D0) return 0; diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c index becbc420ba41..ec70fadde7d9 100644 --- a/sound/pci/ac97/ac97_bus.c +++ b/sound/pci/ac97/ac97_bus.c @@ -31,7 +31,8 @@ static int ac97_bus_suspend(struct device *dev, pm_message_t state) int ret = 0; if (dev->driver && dev->driver->suspend) - ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN); + ret = dev->driver->suspend(dev, state); + return ret; } @@ -40,7 +41,8 @@ static int ac97_bus_resume(struct device *dev) int ret = 0; if (dev->driver && dev->driver->resume) - ret = dev->driver->resume(dev, RESUME_POWER_ON); + ret = dev->driver->resume(dev); + return ret; } -- GitLab From c41455fbac06712992da491844449775cf9a8c80 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 23 Oct 2005 11:59:14 -0700 Subject: [PATCH 0596/1519] [PATCH] kernel-doc: drivers/base fixes driver/base: add missing function parameters; eliminate all warnings. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 4 ++-- drivers/base/driver.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index ac4b5fdd95f5..8615b42b517a 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -407,11 +407,11 @@ static struct device * next_device(struct klist_iter * i) /** * device_for_each_child - device child iterator. - * @dev: parent struct device. + * @parent: parent struct device. * @data: data for the callback. * @fn: function to be called for each device. * - * Iterate over @dev's child devices, and call @fn for each, + * Iterate over @parent's child devices, and call @fn for each, * passing it @data. * * We check the return of @fn each time. If it returns anything diff --git a/drivers/base/driver.c b/drivers/base/driver.c index ef3fe513e398..161f3a390d90 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -28,6 +28,7 @@ static struct device * next_device(struct klist_iter * i) /** * driver_for_each_device - Iterator for devices bound to a driver. * @drv: Driver we're iterating. + * @start: Device to begin with * @data: Data to pass to the callback. * @fn: Function to call for each device. * @@ -57,7 +58,7 @@ EXPORT_SYMBOL_GPL(driver_for_each_device); /** * driver_find_device - device iterator for locating a particular device. - * @driver: The device's driver + * @drv: The device's driver * @start: Device to begin with * @data: Data to pass to match function * @match: Callback function to check device -- GitLab From 1a222bca26ca691e83be1b08f5e96ae96d0d8cae Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 28 Oct 2005 16:45:34 +0200 Subject: [PATCH 0597/1519] [PATCH] Fix documentation of driver suspend/resume callbacks Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/driver.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index 7c26bfae4ba0..59806c9761f7 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -14,8 +14,8 @@ struct device_driver { int (*probe) (struct device * dev); int (*remove) (struct device * dev); - int (*suspend) (struct device * dev, pm_message_t state, u32 level); - int (*resume) (struct device * dev, u32 level); + int (*suspend) (struct device * dev, pm_message_t state); + int (*resume) (struct device * dev); }; @@ -194,11 +194,11 @@ device; i.e. anything in the device's driver_data field. If the device is still present, it should quiesce the device and place it into a supported low-power state. - int (*suspend) (struct device * dev, pm_message_t state, u32 level); + int (*suspend) (struct device * dev, pm_message_t state); suspend is called to put the device in a low power state. - int (*resume) (struct device * dev, u32 level); + int (*resume) (struct device * dev); Resume is used to bring a device back from a low power state. -- GitLab From 408c1ce2716c7a004851c93f9f9dcf3d763bc240 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:36 +0200 Subject: [PATCH 0598/1519] [Bluetooth] Move CRC table into RFCOMM core This patch moves rfcomm_crc_table[] into the RFCOMM core, because there is no need to keep it in a separate file. Signed-off-by: Marcel Holtmann --- include/net/bluetooth/rfcomm.h | 3 -- net/bluetooth/rfcomm/Makefile | 2 +- net/bluetooth/rfcomm/core.c | 43 ++++++++++++++++++++ net/bluetooth/rfcomm/crc.c | 71 ---------------------------------- 4 files changed, 44 insertions(+), 75 deletions(-) delete mode 100644 net/bluetooth/rfcomm/crc.c diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h index fbe557f7ea1d..e656be7c001a 100644 --- a/include/net/bluetooth/rfcomm.h +++ b/include/net/bluetooth/rfcomm.h @@ -275,9 +275,6 @@ static inline void rfcomm_session_hold(struct rfcomm_session *s) atomic_inc(&s->refcnt); } -/* ---- RFCOMM chechsum ---- */ -extern u8 rfcomm_crc_table[]; - /* ---- RFCOMM sockets ---- */ struct sockaddr_rc { sa_family_t rc_family; diff --git a/net/bluetooth/rfcomm/Makefile b/net/bluetooth/rfcomm/Makefile index aecec45ec68d..fe07988a3705 100644 --- a/net/bluetooth/rfcomm/Makefile +++ b/net/bluetooth/rfcomm/Makefile @@ -4,5 +4,5 @@ obj-$(CONFIG_BT_RFCOMM) += rfcomm.o -rfcomm-y := core.o sock.o crc.o +rfcomm-y := core.o sock.o rfcomm-$(CONFIG_BT_RFCOMM_TTY) += tty.o diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 35adce6482b6..c3d56ead840c 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -133,6 +133,49 @@ static inline void rfcomm_session_put(struct rfcomm_session *s) /* ---- RFCOMM FCS computation ---- */ +/* reversed, 8-bit, poly=0x07 */ +static unsigned char rfcomm_crc_table[256] = { + 0x00, 0x91, 0xe3, 0x72, 0x07, 0x96, 0xe4, 0x75, + 0x0e, 0x9f, 0xed, 0x7c, 0x09, 0x98, 0xea, 0x7b, + 0x1c, 0x8d, 0xff, 0x6e, 0x1b, 0x8a, 0xf8, 0x69, + 0x12, 0x83, 0xf1, 0x60, 0x15, 0x84, 0xf6, 0x67, + + 0x38, 0xa9, 0xdb, 0x4a, 0x3f, 0xae, 0xdc, 0x4d, + 0x36, 0xa7, 0xd5, 0x44, 0x31, 0xa0, 0xd2, 0x43, + 0x24, 0xb5, 0xc7, 0x56, 0x23, 0xb2, 0xc0, 0x51, + 0x2a, 0xbb, 0xc9, 0x58, 0x2d, 0xbc, 0xce, 0x5f, + + 0x70, 0xe1, 0x93, 0x02, 0x77, 0xe6, 0x94, 0x05, + 0x7e, 0xef, 0x9d, 0x0c, 0x79, 0xe8, 0x9a, 0x0b, + 0x6c, 0xfd, 0x8f, 0x1e, 0x6b, 0xfa, 0x88, 0x19, + 0x62, 0xf3, 0x81, 0x10, 0x65, 0xf4, 0x86, 0x17, + + 0x48, 0xd9, 0xab, 0x3a, 0x4f, 0xde, 0xac, 0x3d, + 0x46, 0xd7, 0xa5, 0x34, 0x41, 0xd0, 0xa2, 0x33, + 0x54, 0xc5, 0xb7, 0x26, 0x53, 0xc2, 0xb0, 0x21, + 0x5a, 0xcb, 0xb9, 0x28, 0x5d, 0xcc, 0xbe, 0x2f, + + 0xe0, 0x71, 0x03, 0x92, 0xe7, 0x76, 0x04, 0x95, + 0xee, 0x7f, 0x0d, 0x9c, 0xe9, 0x78, 0x0a, 0x9b, + 0xfc, 0x6d, 0x1f, 0x8e, 0xfb, 0x6a, 0x18, 0x89, + 0xf2, 0x63, 0x11, 0x80, 0xf5, 0x64, 0x16, 0x87, + + 0xd8, 0x49, 0x3b, 0xaa, 0xdf, 0x4e, 0x3c, 0xad, + 0xd6, 0x47, 0x35, 0xa4, 0xd1, 0x40, 0x32, 0xa3, + 0xc4, 0x55, 0x27, 0xb6, 0xc3, 0x52, 0x20, 0xb1, + 0xca, 0x5b, 0x29, 0xb8, 0xcd, 0x5c, 0x2e, 0xbf, + + 0x90, 0x01, 0x73, 0xe2, 0x97, 0x06, 0x74, 0xe5, + 0x9e, 0x0f, 0x7d, 0xec, 0x99, 0x08, 0x7a, 0xeb, + 0x8c, 0x1d, 0x6f, 0xfe, 0x8b, 0x1a, 0x68, 0xf9, + 0x82, 0x13, 0x61, 0xf0, 0x85, 0x14, 0x66, 0xf7, + + 0xa8, 0x39, 0x4b, 0xda, 0xaf, 0x3e, 0x4c, 0xdd, + 0xa6, 0x37, 0x45, 0xd4, 0xa1, 0x30, 0x42, 0xd3, + 0xb4, 0x25, 0x57, 0xc6, 0xb3, 0x22, 0x50, 0xc1, + 0xba, 0x2b, 0x59, 0xc8, 0xbd, 0x2c, 0x5e, 0xcf +}; + /* CRC on 2 bytes */ #define __crc(data) (rfcomm_crc_table[rfcomm_crc_table[0xff ^ data[0]] ^ data[1]]) diff --git a/net/bluetooth/rfcomm/crc.c b/net/bluetooth/rfcomm/crc.c deleted file mode 100644 index 1011bc4a8692..000000000000 --- a/net/bluetooth/rfcomm/crc.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - RFCOMM implementation for Linux Bluetooth stack (BlueZ). - Copyright (C) 2002 Maxim Krasnyansky - Copyright (C) 2002 Marcel Holtmann - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - -/* - * RFCOMM FCS calculation. - * - * $Id: crc.c,v 1.2 2002/09/21 09:54:32 holtmann Exp $ - */ - -/* reversed, 8-bit, poly=0x07 */ -unsigned char rfcomm_crc_table[256] = { - 0x00, 0x91, 0xe3, 0x72, 0x07, 0x96, 0xe4, 0x75, - 0x0e, 0x9f, 0xed, 0x7c, 0x09, 0x98, 0xea, 0x7b, - 0x1c, 0x8d, 0xff, 0x6e, 0x1b, 0x8a, 0xf8, 0x69, - 0x12, 0x83, 0xf1, 0x60, 0x15, 0x84, 0xf6, 0x67, - - 0x38, 0xa9, 0xdb, 0x4a, 0x3f, 0xae, 0xdc, 0x4d, - 0x36, 0xa7, 0xd5, 0x44, 0x31, 0xa0, 0xd2, 0x43, - 0x24, 0xb5, 0xc7, 0x56, 0x23, 0xb2, 0xc0, 0x51, - 0x2a, 0xbb, 0xc9, 0x58, 0x2d, 0xbc, 0xce, 0x5f, - - 0x70, 0xe1, 0x93, 0x02, 0x77, 0xe6, 0x94, 0x05, - 0x7e, 0xef, 0x9d, 0x0c, 0x79, 0xe8, 0x9a, 0x0b, - 0x6c, 0xfd, 0x8f, 0x1e, 0x6b, 0xfa, 0x88, 0x19, - 0x62, 0xf3, 0x81, 0x10, 0x65, 0xf4, 0x86, 0x17, - - 0x48, 0xd9, 0xab, 0x3a, 0x4f, 0xde, 0xac, 0x3d, - 0x46, 0xd7, 0xa5, 0x34, 0x41, 0xd0, 0xa2, 0x33, - 0x54, 0xc5, 0xb7, 0x26, 0x53, 0xc2, 0xb0, 0x21, - 0x5a, 0xcb, 0xb9, 0x28, 0x5d, 0xcc, 0xbe, 0x2f, - - 0xe0, 0x71, 0x03, 0x92, 0xe7, 0x76, 0x04, 0x95, - 0xee, 0x7f, 0x0d, 0x9c, 0xe9, 0x78, 0x0a, 0x9b, - 0xfc, 0x6d, 0x1f, 0x8e, 0xfb, 0x6a, 0x18, 0x89, - 0xf2, 0x63, 0x11, 0x80, 0xf5, 0x64, 0x16, 0x87, - - 0xd8, 0x49, 0x3b, 0xaa, 0xdf, 0x4e, 0x3c, 0xad, - 0xd6, 0x47, 0x35, 0xa4, 0xd1, 0x40, 0x32, 0xa3, - 0xc4, 0x55, 0x27, 0xb6, 0xc3, 0x52, 0x20, 0xb1, - 0xca, 0x5b, 0x29, 0xb8, 0xcd, 0x5c, 0x2e, 0xbf, - - 0x90, 0x01, 0x73, 0xe2, 0x97, 0x06, 0x74, 0xe5, - 0x9e, 0x0f, 0x7d, 0xec, 0x99, 0x08, 0x7a, 0xeb, - 0x8c, 0x1d, 0x6f, 0xfe, 0x8b, 0x1a, 0x68, 0xf9, - 0x82, 0x13, 0x61, 0xf0, 0x85, 0x14, 0x66, 0xf7, - - 0xa8, 0x39, 0x4b, 0xda, 0xaf, 0x3e, 0x4c, 0xdd, - 0xa6, 0x37, 0x45, 0xd4, 0xa1, 0x30, 0x42, 0xd3, - 0xb4, 0x25, 0x57, 0xc6, 0xb3, 0x22, 0x50, 0xc1, - 0xba, 0x2b, 0x59, 0xc8, 0xbd, 0x2c, 0x5e, 0xcf -}; -- GitLab From 20dd6f59d6ea5fe47397c5254606c76b1d047727 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:40 +0200 Subject: [PATCH 0599/1519] [Bluetooth] Remove TXCRC compile option for BCSP driver The TXCRC compile option is not really useful and thus change it into a module parameter. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/Kconfig | 8 ------- drivers/bluetooth/hci_bcsp.c | 42 +++++++++++++++++++---------------- drivers/bluetooth/hci_bcsp.h | 1 + drivers/bluetooth/hci_ldisc.c | 2 +- 4 files changed, 25 insertions(+), 28 deletions(-) diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 543f93e0f23f..b9fbe6e7f9ae 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -55,14 +55,6 @@ config BT_HCIUART_BCSP Say Y here to compile support for HCI BCSP protocol. -config BT_HCIUART_BCSP_TXCRC - bool "Transmit CRC with every BCSP packet" - depends on BT_HCIUART_BCSP - help - If you say Y here, a 16-bit CRC checksum will be transmitted along with - every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip. - This increases reliability, but slightly reduces efficiency. - config BT_HCIBCM203X tristate "HCI BCM203x USB driver" depends on USB diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 0ee324e1265d..91bd293d7a0a 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -28,7 +28,7 @@ * $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $ */ -#define VERSION "0.2" +#define VERSION "0.3" #include #include @@ -60,6 +60,7 @@ #define BT_DBG( A... ) #endif +static int txcrc = 1; static int hciextn = 1; /* ---- BCSP CRC calculation ---- */ @@ -173,11 +174,8 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, { struct sk_buff *nskb; u8 hdr[4], chan; - int rel, i; - -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC u16 BCSP_CRC_INIT(bcsp_txmsg_crc); -#endif + int rel, i; switch (pkt_type) { case HCI_ACLDATA_PKT: @@ -240,9 +238,9 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq); bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07; } -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - hdr[0] |= 0x40; -#endif + + if (bcsp->use_crc) + hdr[0] |= 0x40; hdr[1] = ((len << 4) & 0xff) | chan; hdr[2] = len >> 4; @@ -251,25 +249,25 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data, /* Put BCSP header */ for (i = 0; i < 4; i++) { bcsp_slip_one_byte(nskb, hdr[i]); -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]); -#endif + + if (bcsp->use_crc) + bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]); } /* Put payload */ for (i = 0; i < len; i++) { bcsp_slip_one_byte(nskb, data[i]); -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC - bcsp_crc_update(&bcsp_txmsg_crc, data[i]); -#endif + + if (bcsp->use_crc) + bcsp_crc_update(&bcsp_txmsg_crc, data[i]); } -#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC /* Put CRC */ - bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc); - bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff)); - bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff)); -#endif + if (bcsp->use_crc) { + bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc); + bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff)); + bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff)); + } bcsp_slip_msgdelim(nskb); return nskb; @@ -698,6 +696,9 @@ static int bcsp_open(struct hci_uart *hu) bcsp->rx_state = BCSP_W4_PKT_DELIMITER; + if (txcrc) + bcsp->use_crc = 1; + return 0; } @@ -743,5 +744,8 @@ int bcsp_deinit(void) return hci_uart_unregister_proto(&bcsp); } +module_param(txcrc, bool, 0644); +MODULE_PARM_DESC(txcrc, "Transmit CRC with every BCSP packet"); + module_param(hciextn, bool, 0644); MODULE_PARM_DESC(hciextn, "Convert HCI Extensions into BCSP packets"); diff --git a/drivers/bluetooth/hci_bcsp.h b/drivers/bluetooth/hci_bcsp.h index a2b3bb92274b..01bbc664db74 100644 --- a/drivers/bluetooth/hci_bcsp.h +++ b/drivers/bluetooth/hci_bcsp.h @@ -60,6 +60,7 @@ struct bcsp_struct { BCSP_ESCSTATE_ESC } rx_esc_state; + u8 use_crc; u16 message_crc; u8 txack_req; /* Do we need to send ack's to the peer? */ diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index aed80cc22890..8c9317bcd53c 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -27,7 +27,7 @@ * * $Id: hci_ldisc.c,v 1.5 2002/10/02 18:37:20 maxk Exp $ */ -#define VERSION "2.1" +#define VERSION "2.2" #include #include -- GitLab From 0372a6627f862f90a2c43772befeecef508cfd7b Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:45 +0200 Subject: [PATCH 0600/1519] [Bluetooth] Cleanup of the HCI UART driver This patch contains the big cleanup of the HCI UART driver. The uneeded header files are removed and their structure declarations are moved into the protocol implementations. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/hci_bcsp.c | 120 +++++++++++++++++++----------- drivers/bluetooth/hci_bcsp.h | 71 ------------------ drivers/bluetooth/hci_h4.c | 101 +++++++++++++++---------- drivers/bluetooth/hci_h4.h | 44 ----------- drivers/bluetooth/hci_ldisc.c | 134 +++++++++++++++++----------------- drivers/bluetooth/hci_uart.h | 84 +++++++++++---------- 6 files changed, 253 insertions(+), 301 deletions(-) delete mode 100644 drivers/bluetooth/hci_bcsp.h delete mode 100644 drivers/bluetooth/hci_h4.h diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 91bd293d7a0a..0a4761415ac3 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -1,35 +1,27 @@ -/* - BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ). - Copyright 2002 by Fabrizio Gennari - - Based on - hci_h4.c by Maxim Krasnyansky - ABCSP by Carl Orsborn - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $ + * + * Bluetooth HCI UART driver + * + * Copyright (C) 2002-2003 Fabrizio Gennari + * Copyright (C) 2004-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "0.3" - #include #include @@ -52,17 +44,56 @@ #include #include + #include "hci_uart.h" -#include "hci_bcsp.h" #ifndef CONFIG_BT_HCIUART_DEBUG #undef BT_DBG #define BT_DBG( A... ) #endif +#define VERSION "0.3" + static int txcrc = 1; static int hciextn = 1; +#define BCSP_TXWINSIZE 4 + +#define BCSP_ACK_PKT 0x05 +#define BCSP_LE_PKT 0x06 + +struct bcsp_struct { + struct sk_buff_head unack; /* Unack'ed packets queue */ + struct sk_buff_head rel; /* Reliable packets queue */ + struct sk_buff_head unrel; /* Unreliable packets queue */ + + unsigned long rx_count; + struct sk_buff *rx_skb; + u8 rxseq_txack; /* rxseq == txack. */ + u8 rxack; /* Last packet sent by us that the peer ack'ed */ + struct timer_list tbcsp; + + enum { + BCSP_W4_PKT_DELIMITER, + BCSP_W4_PKT_START, + BCSP_W4_BCSP_HDR, + BCSP_W4_DATA, + BCSP_W4_CRC + } rx_state; + + enum { + BCSP_ESCSTATE_NOESC, + BCSP_ESCSTATE_ESC + } rx_esc_state; + + u8 use_crc; + u16 message_crc; + u8 txack_req; /* Do we need to send ack's to the peer? */ + + /* Reliable packet sequence number - used to assign seq to each rel pkt. */ + u8 msgq_txseq; +}; + /* ---- BCSP CRC calculation ---- */ /* Table for calculating CRC for polynomial 0x1021, LSB processed first, @@ -112,6 +143,7 @@ static u16 bcsp_crc_reverse(u16 crc) rev |= (crc & 1); crc = crc >> 1; } + return (rev); } @@ -120,6 +152,7 @@ static u16 bcsp_crc_reverse(u16 crc) static void bcsp_slip_msgdelim(struct sk_buff *skb) { const char pkt_delim = 0xc0; + memcpy(skb_put(skb, 1), &pkt_delim, 1); } @@ -315,7 +348,6 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu) spin_unlock_irqrestore(&bcsp->unack.lock, flags); - /* We could not send a reliable packet, either because there are none or because there are too many unack'ed pkts. Did we receive any packets we have not acknowledged yet ? */ @@ -361,7 +393,7 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp) BT_ERR("Peer acked invalid packet"); BT_DBG("Removing %u pkts out of %u, up to seqno %u", - pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07); + pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07); for (i = 0, skb = ((struct sk_buff *) &bcsp->unack)->next; i < pkts_to_be_removed && skb != (struct sk_buff *) &bcsp->unack; i++) { @@ -372,8 +404,10 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp) kfree_skb(skb); skb = nskb; } + if (bcsp->unack.qlen == 0) del_timer(&bcsp->tbcsp); + spin_unlock_irqrestore(&bcsp->unack.lock, flags); if (i != pkts_to_be_removed) @@ -528,6 +562,7 @@ static inline void bcsp_complete_rx_pkt(struct hci_uart *hu) hci_recv_frame(bcsp->rx_skb); } + bcsp->rx_state = BCSP_W4_PKT_DELIMITER; bcsp->rx_skb = NULL; } @@ -596,8 +631,8 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count) BT_ERR ("Checksum failed: computed %04x received %04x", bcsp_crc_reverse(bcsp->message_crc), - (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) + - bcsp->rx_skb->data[bcsp->rx_skb->len - 1]); + (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) + + bcsp->rx_skb->data[bcsp->rx_skb->len - 1]); kfree_skb(bcsp->rx_skb); bcsp->rx_state = BCSP_W4_PKT_DELIMITER; @@ -631,7 +666,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count) bcsp->rx_count = 4; bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC; BCSP_CRC_INIT(bcsp->message_crc); - + /* Do not increment ptr or decrement count * Allocate packet. Max len of a BCSP pkt= * 0xFFF (payload) +4 (header) +2 (crc) */ @@ -719,18 +754,19 @@ static int bcsp_close(struct hci_uart *hu) } static struct hci_uart_proto bcsp = { - .id = HCI_UART_BCSP, - .open = bcsp_open, - .close = bcsp_close, - .enqueue = bcsp_enqueue, - .dequeue = bcsp_dequeue, - .recv = bcsp_recv, - .flush = bcsp_flush + .id = HCI_UART_BCSP, + .open = bcsp_open, + .close = bcsp_close, + .enqueue = bcsp_enqueue, + .dequeue = bcsp_dequeue, + .recv = bcsp_recv, + .flush = bcsp_flush }; int bcsp_init(void) { int err = hci_uart_register_proto(&bcsp); + if (!err) BT_INFO("HCI BCSP protocol initialized"); else diff --git a/drivers/bluetooth/hci_bcsp.h b/drivers/bluetooth/hci_bcsp.h deleted file mode 100644 index 01bbc664db74..000000000000 --- a/drivers/bluetooth/hci_bcsp.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ). - Copyright 2002 by Fabrizio Gennari - - Based on - hci_h4.c by Maxim Krasnyansky - ABCSP by Carl Orsborn - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - -/* - * $Id: hci_bcsp.h,v 1.2 2002/09/26 05:05:14 maxk Exp $ - */ - -#ifndef __HCI_BCSP_H__ -#define __HCI_BCSP_H__ - -#define BCSP_TXWINSIZE 4 - -#define BCSP_ACK_PKT 0x05 -#define BCSP_LE_PKT 0x06 - -struct bcsp_struct { - struct sk_buff_head unack; /* Unack'ed packets queue */ - struct sk_buff_head rel; /* Reliable packets queue */ - struct sk_buff_head unrel; /* Unreliable packets queue */ - - unsigned long rx_count; - struct sk_buff *rx_skb; - u8 rxseq_txack; /* rxseq == txack. */ - u8 rxack; /* Last packet sent by us that the peer ack'ed */ - struct timer_list tbcsp; - - enum { - BCSP_W4_PKT_DELIMITER, - BCSP_W4_PKT_START, - BCSP_W4_BCSP_HDR, - BCSP_W4_DATA, - BCSP_W4_CRC - } rx_state; - - enum { - BCSP_ESCSTATE_NOESC, - BCSP_ESCSTATE_ESC - } rx_esc_state; - - u8 use_crc; - u16 message_crc; - u8 txack_req; /* Do we need to send ack's to the peer? */ - - /* Reliable packet sequence number - used to assign seq to each rel pkt. */ - u8 msgq_txseq; -}; - -#endif /* __HCI_BCSP_H__ */ diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c index cf8a22d58d96..12e369a66fc2 100644 --- a/drivers/bluetooth/hci_h4.c +++ b/drivers/bluetooth/hci_h4.c @@ -1,33 +1,27 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * Bluetooth HCI UART(H4) protocol. * - * $Id: hci_h4.c,v 1.3 2002/09/09 01:17:32 maxk Exp $ + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky + * Copyright (C) 2004-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "1.2" #include #include @@ -51,24 +45,41 @@ #include #include + #include "hci_uart.h" -#include "hci_h4.h" #ifndef CONFIG_BT_HCIUART_DEBUG #undef BT_DBG #define BT_DBG( A... ) #endif +#define VERSION "1.2" + +struct h4_struct { + unsigned long rx_state; + unsigned long rx_count; + struct sk_buff *rx_skb; + struct sk_buff_head txq; +}; + +/* H4 receiver States */ +#define H4_W4_PACKET_TYPE 0 +#define H4_W4_EVENT_HDR 1 +#define H4_W4_ACL_HDR 2 +#define H4_W4_SCO_HDR 3 +#define H4_W4_DATA 4 + /* Initialize protocol */ static int h4_open(struct hci_uart *hu) { struct h4_struct *h4; - + BT_DBG("hu %p", hu); - + h4 = kmalloc(sizeof(*h4), GFP_ATOMIC); if (!h4) return -ENOMEM; + memset(h4, 0, sizeof(*h4)); skb_queue_head_init(&h4->txq); @@ -83,7 +94,9 @@ static int h4_flush(struct hci_uart *hu) struct h4_struct *h4 = hu->priv; BT_DBG("hu %p", hu); + skb_queue_purge(&h4->txq); + return 0; } @@ -91,16 +104,19 @@ static int h4_flush(struct hci_uart *hu) static int h4_close(struct hci_uart *hu) { struct h4_struct *h4 = hu->priv; + hu->priv = NULL; BT_DBG("hu %p", hu); skb_queue_purge(&h4->txq); + if (h4->rx_skb) kfree_skb(h4->rx_skb); hu->priv = NULL; kfree(h4); + return 0; } @@ -114,6 +130,7 @@ static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb) /* Prepend skb with frame type */ memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); skb_queue_tail(&h4->txq, skb); + return 0; } @@ -122,6 +139,7 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len) register int room = skb_tailroom(h4->rx_skb); BT_DBG("len %d room %d", len, room); + if (!len) { hci_recv_frame(h4->rx_skb); } else if (len > room) { @@ -136,6 +154,7 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len) h4->rx_state = H4_W4_PACKET_TYPE; h4->rx_skb = NULL; h4->rx_count = 0; + return 0; } @@ -228,6 +247,7 @@ static int h4_recv(struct hci_uart *hu, void *data, int count) ptr++; count--; continue; }; + ptr++; count--; /* Allocate packet */ @@ -238,9 +258,11 @@ static int h4_recv(struct hci_uart *hu, void *data, int count) h4->rx_count = 0; return 0; } + h4->rx_skb->dev = (void *) hu->hdev; bt_cb(h4->rx_skb)->pkt_type = type; } + return count; } @@ -251,23 +273,24 @@ static struct sk_buff *h4_dequeue(struct hci_uart *hu) } static struct hci_uart_proto h4p = { - .id = HCI_UART_H4, - .open = h4_open, - .close = h4_close, - .recv = h4_recv, - .enqueue = h4_enqueue, - .dequeue = h4_dequeue, - .flush = h4_flush, + .id = HCI_UART_H4, + .open = h4_open, + .close = h4_close, + .recv = h4_recv, + .enqueue = h4_enqueue, + .dequeue = h4_dequeue, + .flush = h4_flush, }; - + int h4_init(void) { int err = hci_uart_register_proto(&h4p); + if (!err) BT_INFO("HCI H4 protocol initialized"); else BT_ERR("HCI H4 protocol registration failed"); - + return err; } diff --git a/drivers/bluetooth/hci_h4.h b/drivers/bluetooth/hci_h4.h deleted file mode 100644 index b95ff54bfd47..000000000000 --- a/drivers/bluetooth/hci_h4.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - -/* - * $Id: hci_h4.h,v 1.2 2002/09/09 01:17:32 maxk Exp $ - */ - -#ifdef __KERNEL__ -struct h4_struct { - unsigned long rx_state; - unsigned long rx_count; - struct sk_buff *rx_skb; - struct sk_buff_head txq; -}; - -/* H4 receiver States */ -#define H4_W4_PACKET_TYPE 0 -#define H4_W4_EVENT_HDR 1 -#define H4_W4_ACL_HDR 2 -#define H4_W4_SCO_HDR 3 -#define H4_W4_DATA 4 - -#endif /* __KERNEL__ */ diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 8c9317bcd53c..4a775f6ea390 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -1,33 +1,27 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * Bluetooth HCI UART driver. * - * $Id: hci_ldisc.c,v 1.5 2002/10/02 18:37:20 maxk Exp $ + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky + * Copyright (C) 2004-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#define VERSION "2.2" #include #include @@ -59,6 +53,8 @@ #define BT_DBG( A... ) #endif +#define VERSION "2.2" + static int reset = 0; static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO]; @@ -72,6 +68,7 @@ int hci_uart_register_proto(struct hci_uart_proto *p) return -EEXIST; hup[p->id] = p; + return 0; } @@ -84,6 +81,7 @@ int hci_uart_unregister_proto(struct hci_uart_proto *p) return -EINVAL; hup[p->id] = NULL; + return 0; } @@ -91,13 +89,14 @@ static struct hci_uart_proto *hci_uart_get_proto(unsigned int id) { if (id >= HCI_UART_MAX_PROTO) return NULL; + return hup[id]; } static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type) { struct hci_dev *hdev = hu->hdev; - + /* Update HCI stat counters */ switch (pkt_type) { case HCI_COMMAND_PKT: @@ -117,10 +116,12 @@ static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type) static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu) { struct sk_buff *skb = hu->tx_skb; + if (!skb) skb = hu->proto->dequeue(hu); else hu->tx_skb = NULL; + return skb; } @@ -129,7 +130,7 @@ int hci_uart_tx_wakeup(struct hci_uart *hu) struct tty_struct *tty = hu->tty; struct hci_dev *hdev = hu->hdev; struct sk_buff *skb; - + if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) { set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state); return 0; @@ -142,7 +143,7 @@ int hci_uart_tx_wakeup(struct hci_uart *hu) while ((skb = hci_uart_dequeue(hu))) { int len; - + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); len = tty->driver->write(tty, skb->data, skb->len); hdev->stat.byte_tx += len; @@ -152,11 +153,11 @@ int hci_uart_tx_wakeup(struct hci_uart *hu) hu->tx_skb = skb; break; } - + hci_uart_tx_complete(hu, bt_cb(skb)->pkt_type); kfree_skb(skb); - } - + } + if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state)) goto restart; @@ -173,6 +174,7 @@ static int hci_uart_open(struct hci_dev *hdev) /* Nothing to do for UART driver */ set_bit(HCI_RUNNING, &hdev->flags); + return 0; } @@ -234,6 +236,7 @@ static int hci_uart_send_frame(struct sk_buff *skb) hu->proto->enqueue(hu, skb); hci_uart_tx_wakeup(hu); + return 0; } @@ -241,7 +244,8 @@ static void hci_uart_destruct(struct hci_dev *hdev) { struct hci_uart *hu; - if (!hdev) return; + if (!hdev) + return; BT_DBG("%s", hdev->name); @@ -272,6 +276,7 @@ static int hci_uart_tty_open(struct tty_struct *tty) BT_ERR("Can't allocate controll structure"); return -ENFILE; } + memset(hu, 0, sizeof(struct hci_uart)); tty->disc_data = hu; @@ -280,8 +285,10 @@ static int hci_uart_tty_open(struct tty_struct *tty) spin_lock_init(&hu->rx_lock); /* Flush any pending characters in the driver and line discipline. */ + /* FIXME: why is this needed. Note don't use ldisc_ref here as the open path is before the ldisc is referencable */ + if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty); @@ -372,13 +379,13 @@ static int hci_uart_tty_room (struct tty_struct *tty) static void hci_uart_tty_receive(struct tty_struct *tty, const __u8 *data, char *flags, int count) { struct hci_uart *hu = (void *)tty->disc_data; - + if (!hu || tty != hu->tty) return; if (!test_bit(HCI_UART_PROTO_SET, &hu->flags)) return; - + spin_lock(&hu->rx_lock); hu->proto->recv(hu, (void *) data, count); hu->hdev->stat.byte_rx += count; @@ -429,8 +436,8 @@ static int hci_uart_register_dev(struct hci_uart *hu) static int hci_uart_set_proto(struct hci_uart *hu, int id) { struct hci_uart_proto *p; - int err; - + int err; + p = hci_uart_get_proto(id); if (!p) return -EPROTONOSUPPORT; @@ -446,6 +453,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id) p->close(hu); return err; } + return 0; } @@ -463,7 +471,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id) * Return Value: Command dependent */ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) + unsigned int cmd, unsigned long arg) { struct hci_uart *hu = (void *)tty->disc_data; int err = 0; @@ -483,14 +491,14 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, return err; } tty->low_latency = 1; - } else + } else return -EBUSY; case HCIUARTGETPROTO: if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) return hu->proto->id; return -EUNATCH; - + default: err = n_tty_ioctl(tty, file, cmd, arg); break; @@ -502,28 +510,24 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, /* * We don't provide read/write/poll interface for user space. */ -static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, unsigned char __user *buf, size_t nr) +static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, + unsigned char __user *buf, size_t nr) { return 0; } -static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count) + +static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, + const unsigned char *data, size_t count) { return 0; } -static unsigned int hci_uart_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait) + +static unsigned int hci_uart_tty_poll(struct tty_struct *tty, + struct file *filp, poll_table *wait) { return 0; } -#ifdef CONFIG_BT_HCIUART_H4 -int h4_init(void); -int h4_deinit(void); -#endif -#ifdef CONFIG_BT_HCIUART_BCSP -int bcsp_init(void); -int bcsp_deinit(void); -#endif - static int __init hci_uart_init(void) { static struct tty_ldisc hci_uart_ldisc; @@ -534,18 +538,18 @@ static int __init hci_uart_init(void) /* Register the tty discipline */ memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc)); - hci_uart_ldisc.magic = TTY_LDISC_MAGIC; - hci_uart_ldisc.name = "n_hci"; - hci_uart_ldisc.open = hci_uart_tty_open; - hci_uart_ldisc.close = hci_uart_tty_close; - hci_uart_ldisc.read = hci_uart_tty_read; - hci_uart_ldisc.write = hci_uart_tty_write; - hci_uart_ldisc.ioctl = hci_uart_tty_ioctl; - hci_uart_ldisc.poll = hci_uart_tty_poll; - hci_uart_ldisc.receive_room= hci_uart_tty_room; - hci_uart_ldisc.receive_buf = hci_uart_tty_receive; - hci_uart_ldisc.write_wakeup= hci_uart_tty_wakeup; - hci_uart_ldisc.owner = THIS_MODULE; + hci_uart_ldisc.magic = TTY_LDISC_MAGIC; + hci_uart_ldisc.name = "n_hci"; + hci_uart_ldisc.open = hci_uart_tty_open; + hci_uart_ldisc.close = hci_uart_tty_close; + hci_uart_ldisc.read = hci_uart_tty_read; + hci_uart_ldisc.write = hci_uart_tty_write; + hci_uart_ldisc.ioctl = hci_uart_tty_ioctl; + hci_uart_ldisc.poll = hci_uart_tty_poll; + hci_uart_ldisc.receive_room = hci_uart_tty_room; + hci_uart_ldisc.receive_buf = hci_uart_tty_receive; + hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup; + hci_uart_ldisc.owner = THIS_MODULE; if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) { BT_ERR("HCI line discipline registration failed. (%d)", err); diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h index 0a57d72790ec..b250e6789dee 100644 --- a/drivers/bluetooth/hci_uart.h +++ b/drivers/bluetooth/hci_uart.h @@ -1,32 +1,29 @@ -/* - BlueZ - Bluetooth protocol stack for Linux - Copyright (C) 2000-2001 Qualcomm Incorporated - - Written 2000,2001 by Maxim Krasnyansky - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License version 2 as - published by the Free Software Foundation; - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. - IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY - CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES - WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - - ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, - COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS - SOFTWARE IS DISCLAIMED. -*/ - /* - * $Id: hci_uart.h,v 1.2 2002/09/09 01:17:32 maxk Exp $ + * + * Bluetooth HCI UART driver + * + * Copyright (C) 2000-2001 Qualcomm Incorporated + * Copyright (C) 2002-2003 Maxim Krasnyansky + * Copyright (C) 2004-2005 Marcel Holtmann + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * */ -#ifndef N_HCI +#ifndef N_HCI #define N_HCI 15 #endif @@ -42,7 +39,6 @@ #define HCI_UART_3WIRE 2 #define HCI_UART_H4DS 3 -#ifdef __KERNEL__ struct hci_uart; struct hci_uart_proto { @@ -56,27 +52,35 @@ struct hci_uart_proto { }; struct hci_uart { - struct tty_struct *tty; - struct hci_dev *hdev; - unsigned long flags; + struct tty_struct *tty; + struct hci_dev *hdev; + unsigned long flags; - struct hci_uart_proto *proto; - void *priv; - - struct sk_buff *tx_skb; - unsigned long tx_state; - spinlock_t rx_lock; + struct hci_uart_proto *proto; + void *priv; + + struct sk_buff *tx_skb; + unsigned long tx_state; + spinlock_t rx_lock; }; /* HCI_UART flag bits */ -#define HCI_UART_PROTO_SET 0 +#define HCI_UART_PROTO_SET 0 /* TX states */ -#define HCI_UART_SENDING 1 -#define HCI_UART_TX_WAKEUP 2 +#define HCI_UART_SENDING 1 +#define HCI_UART_TX_WAKEUP 2 int hci_uart_register_proto(struct hci_uart_proto *p); int hci_uart_unregister_proto(struct hci_uart_proto *p); int hci_uart_tx_wakeup(struct hci_uart *hu); -#endif /* __KERNEL__ */ +#ifdef CONFIG_BT_HCIUART_H4 +int h4_init(void); +int h4_deinit(void); +#endif + +#ifdef CONFIG_BT_HCIUART_BCSP +int bcsp_init(void); +int bcsp_deinit(void); +#endif -- GitLab From 6516455d3b42b33759a33a8102c1b8b48af4d9c9 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:48 +0200 Subject: [PATCH 0601/1519] [Bluetooth] Make more functions static This patch makes another bunch of functions static. Signed-off-by: Marcel Holtmann --- include/net/bluetooth/bluetooth.h | 6 ++++++ net/bluetooth/af_bluetooth.c | 6 ------ net/bluetooth/hci_core.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 210458624840..e42d728b1620 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -171,4 +171,10 @@ static inline int skb_frags_no(struct sk_buff *skb) int bt_err(__u16 code); +extern int hci_sock_init(void); +extern int hci_sock_cleanup(void); + +extern int bt_sysfs_init(void); +extern void bt_sysfs_cleanup(void); + #endif /* __BLUETOOTH_H */ diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 12b43345b54f..03532062a46a 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -308,12 +308,6 @@ static struct net_proto_family bt_sock_family_ops = { .create = bt_sock_create, }; -extern int hci_sock_init(void); -extern int hci_sock_cleanup(void); - -extern int bt_sysfs_init(void); -extern int bt_sysfs_cleanup(void); - static int __init bt_init(void) { BT_INFO("Core ver %s", VERSION); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 55dc42eac92c..cf0df1c8c933 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -87,7 +87,7 @@ int hci_unregister_notifier(struct notifier_block *nb) return notifier_chain_unregister(&hci_notifier, nb); } -void hci_notify(struct hci_dev *hdev, int event) +static void hci_notify(struct hci_dev *hdev, int event) { notifier_call_chain(&hci_notifier, event, hdev); } @@ -1347,7 +1347,7 @@ static inline void hci_scodata_packet(struct hci_dev *hdev, struct sk_buff *skb) kfree_skb(skb); } -void hci_rx_task(unsigned long arg) +static void hci_rx_task(unsigned long arg) { struct hci_dev *hdev = (struct hci_dev *) arg; struct sk_buff *skb; -- GitLab From dd7f5527b3e68a7b2f715ae1a21164383f418013 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:53 +0200 Subject: [PATCH 0602/1519] [Bluetooth] Update security filter for Extended Inquiry Response This patch updates the HCI security filter with support for the Extended Inquiry Response (EIR) feature. Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_sock.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 32ef7975a139..799e448750ad 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -66,20 +66,20 @@ static struct hci_sec_filter hci_sec_filter = { /* Packet types */ 0x10, /* Events */ - { 0x1000d9fe, 0x0000300c }, + { 0x1000d9fe, 0x0000b00c }, /* Commands */ { { 0x0 }, /* OGF_LINK_CTL */ - { 0xbe000006, 0x00000001, 0x0000, 0x00 }, + { 0xbe000006, 0x00000001, 0x000000, 0x00 }, /* OGF_LINK_POLICY */ - { 0x00005200, 0x00000000, 0x0000, 0x00 }, + { 0x00005200, 0x00000000, 0x000000, 0x00 }, /* OGF_HOST_CTL */ - { 0xaab00200, 0x2b402aaa, 0x0154, 0x00 }, + { 0xaab00200, 0x2b402aaa, 0x020154, 0x00 }, /* OGF_INFO_PARAM */ - { 0x000002be, 0x00000000, 0x0000, 0x00 }, + { 0x000002be, 0x00000000, 0x000000, 0x00 }, /* OGF_STATUS_PARAM */ - { 0x000000ea, 0x00000000, 0x0000, 0x00 } + { 0x000000ea, 0x00000000, 0x000000, 0x00 } } }; -- GitLab From 245dc3d19b6ff7db42c9f3cca9006c8db59e2dee Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 28 Oct 2005 19:20:57 +0200 Subject: [PATCH 0603/1519] [Bluetooth] Ignore additional interfaces of BPA 100/105 devices If a BPA 100/105 device contains more then one interface then ignore the additional interfaces, because they are unused. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/bpa10x.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 4fa85234d8b5..0db0400519c9 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -550,6 +550,9 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id * if (ignore) return -ENODEV; + if (intf->cur_altsetting->desc.bInterfaceNumber > 0) + return -ENODEV; + data = kmalloc(sizeof(*data), GFP_KERNEL); if (!data) { BT_ERR("Can't allocate data structure"); -- GitLab From 7038f1cbac899654cf0515e60dbe3e44d58271de Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Fri, 28 Oct 2005 13:27:40 -0500 Subject: [PATCH 0604/1519] JFS: make sure right-most xtree pages have header.next set to zero The xtTruncate code was only doing this for leaf pages. When a file is horribly fragmented, we may truncate a file leaving an internal page with an invalid head.next field, which may cause a stale page to be referenced. Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_xtree.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/fs/jfs/jfs_xtree.c b/fs/jfs/jfs_xtree.c index a7fe2f2b969f..e72f4ebb6e9c 100644 --- a/fs/jfs/jfs_xtree.c +++ b/fs/jfs/jfs_xtree.c @@ -3516,16 +3516,10 @@ s64 xtTruncate(tid_t tid, struct inode *ip, s64 newsize, int flag) /* process entries backward from last index */ index = le16_to_cpu(p->header.nextindex) - 1; - if (p->header.flag & BT_INTERNAL) - goto getChild; - - /* - * leaf page - */ - /* Since this is the rightmost leaf, and we may have already freed - * a page that was formerly to the right, let's make sure that the - * next pointer is zero. + /* Since this is the rightmost page at this level, and we may have + * already freed a page that was formerly to the right, let's make + * sure that the next pointer is zero. */ if (p->header.next) { if (log) @@ -3539,6 +3533,12 @@ s64 xtTruncate(tid_t tid, struct inode *ip, s64 newsize, int flag) p->header.next = 0; } + if (p->header.flag & BT_INTERNAL) + goto getChild; + + /* + * leaf page + */ freed = 0; /* does region covered by leaf page precede Teof ? */ -- GitLab From e89e9cf539a28df7d0eb1d0a545368e9920b34ac Mon Sep 17 00:00:00 2001 From: Ananda Raju Date: Tue, 18 Oct 2005 15:46:41 -0700 Subject: [PATCH 0605/1519] [IPv4/IPv6]: UFO Scatter-gather approach Attached is kernel patch for UDP Fragmentation Offload (UFO) feature. 1. This patch incorporate the review comments by Jeff Garzik. 2. Renamed USO as UFO (UDP Fragmentation Offload) 3. udp sendfile support with UFO This patches uses scatter-gather feature of skb to generate large UDP datagram. Below is a "how-to" on changes required in network device driver to use the UFO interface. UDP Fragmentation Offload (UFO) Interface: ------------------------------------------- UFO is a feature wherein the Linux kernel network stack will offload the IP fragmentation functionality of large UDP datagram to hardware. This will reduce the overhead of stack in fragmenting the large UDP datagram to MTU sized packets 1) Drivers indicate their capability of UFO using dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG NETIF_F_HW_CSUM is required for UFO over ipv6. 2) UFO packet will be submitted for transmission using driver xmit routine. UFO packet will have a non-zero value for "skb_shinfo(skb)->ufo_size" skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP fragment going out of the adapter after IP fragmentation by hardware. skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[] contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW indicating that hardware has to do checksum calculation. Hardware should compute the UDP checksum of complete datagram and also ip header checksum of each fragmented IP packet. For IPV6 the UFO provides the fragment identification-id in skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating IPv6 fragments. Signed-off-by: Ananda Raju Signed-off-by: Rusty Russell (forwarded) Signed-off-by: Arnaldo Carvalho de Melo --- include/linux/ethtool.h | 8 ++++ include/linux/netdevice.h | 1 + include/linux/skbuff.h | 7 ++++ net/core/dev.c | 14 +++++++ net/core/ethtool.c | 53 +++++++++++++++++++++++++ net/core/skbuff.c | 75 +++++++++++++++++++++++++++++++++++ net/ipv4/ip_output.c | 83 ++++++++++++++++++++++++++++++++++++--- net/ipv6/ip6_output.c | 71 ++++++++++++++++++++++++++++++++- 8 files changed, 306 insertions(+), 6 deletions(-) diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index ed1440ea4c91..d2c390eff1b2 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -269,6 +269,8 @@ u32 ethtool_op_get_tso(struct net_device *dev); int ethtool_op_set_tso(struct net_device *dev, u32 data); int ethtool_op_get_perm_addr(struct net_device *dev, struct ethtool_perm_addr *addr, u8 *data); +u32 ethtool_op_get_ufo(struct net_device *dev); +int ethtool_op_set_ufo(struct net_device *dev, u32 data); /** * ðtool_ops - Alter and report network device settings @@ -298,6 +300,8 @@ int ethtool_op_get_perm_addr(struct net_device *dev, * set_sg: Turn scatter-gather on or off * get_tso: Report whether TCP segmentation offload is enabled * set_tso: Turn TCP segmentation offload on or off + * get_ufo: Report whether UDP fragmentation offload is enabled + * set_ufo: Turn UDP fragmentation offload on or off * self_test: Run specified self-tests * get_strings: Return a set of strings that describe the requested objects * phys_id: Identify the device @@ -364,6 +368,8 @@ struct ethtool_ops { int (*get_perm_addr)(struct net_device *, struct ethtool_perm_addr *, u8 *); int (*begin)(struct net_device *); void (*complete)(struct net_device *); + u32 (*get_ufo)(struct net_device *); + int (*set_ufo)(struct net_device *, u32); }; /* CMDs currently supported */ @@ -400,6 +406,8 @@ struct ethtool_ops { #define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ #define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ #define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ +#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ +#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a9281b24c40b..c6efce4a04a4 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -308,6 +308,7 @@ struct net_device #define NETIF_F_VLAN_CHALLENGED 1024 /* Device cannot handle VLAN packets */ #define NETIF_F_TSO 2048 /* Can offload TCP/IP segmentation */ #define NETIF_F_LLTX 4096 /* LockLess TX */ +#define NETIF_F_UFO 8192 /* Can offload UDP Large Send*/ struct net_device *next_sched; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index b756935da9c8..4286d832166f 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -137,6 +137,8 @@ struct skb_shared_info { unsigned int nr_frags; unsigned short tso_size; unsigned short tso_segs; + unsigned short ufo_size; + unsigned int ip6_frag_id; struct sk_buff *frag_list; skb_frag_t frags[MAX_SKB_FRAGS]; }; @@ -341,6 +343,11 @@ extern void skb_over_panic(struct sk_buff *skb, int len, extern void skb_under_panic(struct sk_buff *skb, int len, void *here); +extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb, + int getfrag(void *from, char *to, int offset, + int len,int odd, struct sk_buff *skb), + void *from, int length); + struct skb_seq_state { __u32 lower_offset; diff --git a/net/core/dev.c b/net/core/dev.c index a44eeef24edf..8d1541595277 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2717,6 +2717,20 @@ int register_netdevice(struct net_device *dev) dev->name); dev->features &= ~NETIF_F_TSO; } + if (dev->features & NETIF_F_UFO) { + if (!(dev->features & NETIF_F_HW_CSUM)) { + printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no " + "NETIF_F_HW_CSUM feature.\n", + dev->name); + dev->features &= ~NETIF_F_UFO; + } + if (!(dev->features & NETIF_F_SG)) { + printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no " + "NETIF_F_SG feature.\n", + dev->name); + dev->features &= ~NETIF_F_UFO; + } + } /* * nil rebuild_header routine, diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 404b761e82ce..0350586e9195 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -93,6 +93,20 @@ int ethtool_op_get_perm_addr(struct net_device *dev, struct ethtool_perm_addr *a } +u32 ethtool_op_get_ufo(struct net_device *dev) +{ + return (dev->features & NETIF_F_UFO) != 0; +} + +int ethtool_op_set_ufo(struct net_device *dev, u32 data) +{ + if (data) + dev->features |= NETIF_F_UFO; + else + dev->features &= ~NETIF_F_UFO; + return 0; +} + /* Handlers for each ethtool command */ static int ethtool_get_settings(struct net_device *dev, void __user *useraddr) @@ -483,6 +497,11 @@ static int __ethtool_set_sg(struct net_device *dev, u32 data) return err; } + if (!data && dev->ethtool_ops->set_ufo) { + err = dev->ethtool_ops->set_ufo(dev, 0); + if (err) + return err; + } return dev->ethtool_ops->set_sg(dev, data); } @@ -569,6 +588,32 @@ static int ethtool_set_tso(struct net_device *dev, char __user *useraddr) return dev->ethtool_ops->set_tso(dev, edata.data); } +static int ethtool_get_ufo(struct net_device *dev, char __user *useraddr) +{ + struct ethtool_value edata = { ETHTOOL_GTSO }; + + if (!dev->ethtool_ops->get_ufo) + return -EOPNOTSUPP; + edata.data = dev->ethtool_ops->get_ufo(dev); + if (copy_to_user(useraddr, &edata, sizeof(edata))) + return -EFAULT; + return 0; +} +static int ethtool_set_ufo(struct net_device *dev, char __user *useraddr) +{ + struct ethtool_value edata; + + if (!dev->ethtool_ops->set_ufo) + return -EOPNOTSUPP; + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if (edata.data && !(dev->features & NETIF_F_SG)) + return -EINVAL; + if (edata.data && !(dev->features & NETIF_F_HW_CSUM)) + return -EINVAL; + return dev->ethtool_ops->set_ufo(dev, edata.data); +} + static int ethtool_self_test(struct net_device *dev, char __user *useraddr) { struct ethtool_test test; @@ -854,6 +899,12 @@ int dev_ethtool(struct ifreq *ifr) case ETHTOOL_GPERMADDR: rc = ethtool_get_perm_addr(dev, useraddr); break; + case ETHTOOL_GUFO: + rc = ethtool_get_ufo(dev, useraddr); + break; + case ETHTOOL_SUFO: + rc = ethtool_set_ufo(dev, useraddr); + break; default: rc = -EOPNOTSUPP; } @@ -882,3 +933,5 @@ EXPORT_SYMBOL(ethtool_op_set_sg); EXPORT_SYMBOL(ethtool_op_set_tso); EXPORT_SYMBOL(ethtool_op_set_tx_csum); EXPORT_SYMBOL(ethtool_op_set_tx_hw_csum); +EXPORT_SYMBOL(ethtool_op_set_ufo); +EXPORT_SYMBOL(ethtool_op_get_ufo); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ef9d46b91eb9..95501e40100e 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -176,6 +176,8 @@ struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask, skb_shinfo(skb)->tso_size = 0; skb_shinfo(skb)->tso_segs = 0; skb_shinfo(skb)->frag_list = NULL; + skb_shinfo(skb)->ufo_size = 0; + skb_shinfo(skb)->ip6_frag_id = 0; out: return skb; nodata: @@ -1696,6 +1698,78 @@ unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, return textsearch_find(config, state); } +/** + * skb_append_datato_frags: - append the user data to a skb + * @sk: sock structure + * @skb: skb structure to be appened with user data. + * @getfrag: call back function to be used for getting the user data + * @from: pointer to user message iov + * @length: length of the iov message + * + * Description: This procedure append the user data in the fragment part + * of the skb if any page alloc fails user this procedure returns -ENOMEM + */ +int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb, + int getfrag(void *from, char *to, int offset, + int len, int odd, struct sk_buff *skb), + void *from, int length) +{ + int frg_cnt = 0; + skb_frag_t *frag = NULL; + struct page *page = NULL; + int copy, left; + int offset = 0; + int ret; + + do { + /* Return error if we don't have space for new frag */ + frg_cnt = skb_shinfo(skb)->nr_frags; + if (frg_cnt >= MAX_SKB_FRAGS) + return -EFAULT; + + /* allocate a new page for next frag */ + page = alloc_pages(sk->sk_allocation, 0); + + /* If alloc_page fails just return failure and caller will + * free previous allocated pages by doing kfree_skb() + */ + if (page == NULL) + return -ENOMEM; + + /* initialize the next frag */ + sk->sk_sndmsg_page = page; + sk->sk_sndmsg_off = 0; + skb_fill_page_desc(skb, frg_cnt, page, 0, 0); + skb->truesize += PAGE_SIZE; + atomic_add(PAGE_SIZE, &sk->sk_wmem_alloc); + + /* get the new initialized frag */ + frg_cnt = skb_shinfo(skb)->nr_frags; + frag = &skb_shinfo(skb)->frags[frg_cnt - 1]; + + /* copy the user data to page */ + left = PAGE_SIZE - frag->page_offset; + copy = (length > left)? left : length; + + ret = getfrag(from, (page_address(frag->page) + + frag->page_offset + frag->size), + offset, copy, 0, skb); + if (ret < 0) + return -EFAULT; + + /* copy was successful so update the size parameters */ + sk->sk_sndmsg_off += copy; + frag->size += copy; + skb->len += copy; + skb->data_len += copy; + offset += copy; + length -= copy; + + } while (length > 0); + + return 0; +} + void __init skb_init(void) { skbuff_head_cache = kmem_cache_create("skbuff_head_cache", @@ -1747,3 +1821,4 @@ EXPORT_SYMBOL(skb_prepare_seq_read); EXPORT_SYMBOL(skb_seq_read); EXPORT_SYMBOL(skb_abort_seq_read); EXPORT_SYMBOL(skb_find_text); +EXPORT_SYMBOL(skb_append_datato_frags); diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 87e350069abb..17758234a3e3 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -275,7 +275,8 @@ int ip_output(struct sk_buff *skb) { IP_INC_STATS(IPSTATS_MIB_OUTREQUESTS); - if (skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->tso_size) + if (skb->len > dst_mtu(skb->dst) && + !(skb_shinfo(skb)->ufo_size || skb_shinfo(skb)->tso_size)) return ip_fragment(skb, ip_finish_output); else return ip_finish_output(skb); @@ -688,6 +689,60 @@ csum_page(struct page *page, int offset, int copy) return csum; } +inline int ip_ufo_append_data(struct sock *sk, + int getfrag(void *from, char *to, int offset, int len, + int odd, struct sk_buff *skb), + void *from, int length, int hh_len, int fragheaderlen, + int transhdrlen, int mtu,unsigned int flags) +{ + struct sk_buff *skb; + int err; + + /* There is support for UDP fragmentation offload by network + * device, so create one single skb packet containing complete + * udp datagram + */ + if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) { + skb = sock_alloc_send_skb(sk, + hh_len + fragheaderlen + transhdrlen + 20, + (flags & MSG_DONTWAIT), &err); + + if (skb == NULL) + return err; + + /* reserve space for Hardware header */ + skb_reserve(skb, hh_len); + + /* create space for UDP/IP header */ + skb_put(skb,fragheaderlen + transhdrlen); + + /* initialize network header pointer */ + skb->nh.raw = skb->data; + + /* initialize protocol header pointer */ + skb->h.raw = skb->data + fragheaderlen; + + skb->ip_summed = CHECKSUM_HW; + skb->csum = 0; + sk->sk_sndmsg_off = 0; + } + + err = skb_append_datato_frags(sk,skb, getfrag, from, + (length - transhdrlen)); + if (!err) { + /* specify the length of each IP datagram fragment*/ + skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen); + __skb_queue_tail(&sk->sk_write_queue, skb); + + return 0; + } + /* There is not enough support do UFO , + * so follow normal path + */ + kfree_skb(skb); + return err; +} + /* * ip_append_data() and ip_append_page() can make one large IP datagram * from many pieces of data. Each pieces will be holded on the socket @@ -777,6 +832,15 @@ int ip_append_data(struct sock *sk, csummode = CHECKSUM_HW; inet->cork.length += length; + if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) && + (rt->u.dst.dev->features & NETIF_F_UFO)) { + + if(ip_ufo_append_data(sk, getfrag, from, length, hh_len, + fragheaderlen, transhdrlen, mtu, flags)) + goto error; + + return 0; + } /* So, what's going on in the loop below? * @@ -1008,14 +1072,23 @@ ssize_t ip_append_page(struct sock *sk, struct page *page, return -EINVAL; inet->cork.length += size; + if ((sk->sk_protocol == IPPROTO_UDP) && + (rt->u.dst.dev->features & NETIF_F_UFO)) + skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen); + while (size > 0) { int i; - /* Check if the remaining data fits into current packet. */ - len = mtu - skb->len; - if (len < size) - len = maxfraglen - skb->len; + if (skb_shinfo(skb)->ufo_size) + len = size; + else { + + /* Check if the remaining data fits into current packet. */ + len = mtu - skb->len; + if (len < size) + len = maxfraglen - skb->len; + } if (len <= 0) { struct sk_buff *skb_prev; char *data; diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 563b442ffab8..614296a920c6 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -147,7 +147,8 @@ static int ip6_output2(struct sk_buff *skb) int ip6_output(struct sk_buff *skb) { - if (skb->len > dst_mtu(skb->dst) || dst_allfrag(skb->dst)) + if ((skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->ufo_size) || + dst_allfrag(skb->dst)) return ip6_fragment(skb, ip6_output2); else return ip6_output2(skb); @@ -768,6 +769,65 @@ int ip6_dst_lookup(struct sock *sk, struct dst_entry **dst, struct flowi *fl) *dst = NULL; return err; } +inline int ip6_ufo_append_data(struct sock *sk, + int getfrag(void *from, char *to, int offset, int len, + int odd, struct sk_buff *skb), + void *from, int length, int hh_len, int fragheaderlen, + int transhdrlen, int mtu,unsigned int flags) + +{ + struct sk_buff *skb; + int err; + + /* There is support for UDP large send offload by network + * device, so create one single skb packet containing complete + * udp datagram + */ + if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) { + skb = sock_alloc_send_skb(sk, + hh_len + fragheaderlen + transhdrlen + 20, + (flags & MSG_DONTWAIT), &err); + if (skb == NULL) + return -ENOMEM; + + /* reserve space for Hardware header */ + skb_reserve(skb, hh_len); + + /* create space for UDP/IP header */ + skb_put(skb,fragheaderlen + transhdrlen); + + /* initialize network header pointer */ + skb->nh.raw = skb->data; + + /* initialize protocol header pointer */ + skb->h.raw = skb->data + fragheaderlen; + + skb->ip_summed = CHECKSUM_HW; + skb->csum = 0; + sk->sk_sndmsg_off = 0; + } + + err = skb_append_datato_frags(sk,skb, getfrag, from, + (length - transhdrlen)); + if (!err) { + struct frag_hdr fhdr; + + /* specify the length of each IP datagram fragment*/ + skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen) - + sizeof(struct frag_hdr); + ipv6_select_ident(skb, &fhdr); + skb_shinfo(skb)->ip6_frag_id = fhdr.identification; + __skb_queue_tail(&sk->sk_write_queue, skb); + + return 0; + } + /* There is not enough support do UPD LSO, + * so follow normal path + */ + kfree_skb(skb); + + return err; +} int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb), @@ -860,6 +920,15 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, */ inet->cork.length += length; + if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) && + (rt->u.dst.dev->features & NETIF_F_UFO)) { + + if(ip6_ufo_append_data(sk, getfrag, from, length, hh_len, + fragheaderlen, transhdrlen, mtu, flags)) + goto error; + + return 0; + } if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) goto alloc_new_skb; -- GitLab From f12baeab9d65e2fe1b43b09b666f5efcb81b9369 Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Sat, 29 Oct 2005 00:02:32 +0800 Subject: [PATCH 0606/1519] [MCAST] IPv6: Fix algorithm to compute Querier's Query Interval 5.1.3. Maximum Response Code The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: If Maximum Response Code < 32768, Maximum Response Delay = Maximum Response Code If Maximum Response Code >=32768, Maximum Response Code represents a floating-point value as follows: 0 1 2 3 4 5 6 7 8 9 A B C D E F +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |1| exp | mant | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Maximum Response Delay = (mant | 0x1000) << (exp+3) 5.1.9. QQIC (Querier's Query Interval Code) The Querier's Query Interval Code field specifies the [Query Interval] used by the Querier. The actual interval, called the Querier's Query Interval (QQI), is represented in units of seconds, and is derived from the Querier's Query Interval Code as follows: If QQIC < 128, QQI = QQIC If QQIC >= 128, QQIC represents a floating-point value as follows: 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ |1| exp | mant | +-+-+-+-+-+-+-+-+ QQI = (mant | 0x10) << (exp + 3) -- rfc3810 #define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value) #define MLDV2_MRC(value) MLDV2_EXP(0x8000, 12, 3, value) Above macro are defined in mcast.c. but 1 << 4 == 0x10 and 1 << 12 == 0x1000. So the result computed by original Macro is larger. Signed-off-by: Yan Zheng Acked-by: David L Stevens Signed-off-by: Arnaldo Carvalho de Melo --- net/ipv6/mcast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 39a96c768102..c4f2a0ef7489 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -164,7 +164,7 @@ static int ip6_mc_leave_src(struct sock *sk, struct ipv6_mc_socklist *iml, #define MLDV2_MASK(value, nb) ((nb)>=32 ? (value) : ((1<<(nb))-1) & (value)) #define MLDV2_EXP(thresh, nbmant, nbexp, value) \ ((value) < (thresh) ? (value) : \ - ((MLDV2_MASK(value, nbmant) | (1<<(nbmant+nbexp))) << \ + ((MLDV2_MASK(value, nbmant) | (1<<(nbmant))) << \ (MLDV2_MASK((value) >> (nbmant), nbexp) + (nbexp)))) #define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value) -- GitLab From a21a84a375ea3783cf9a53730d643c4db24371bc Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 28 Oct 2005 15:43:16 -0400 Subject: [PATCH 0607/1519] [libata pdc_adma] minor fixes and cleanups Changes mostly from Mark Lord. - fix bugs in probe-time error handling - only complete qc if not NULL - check port-level polling flags --- drivers/scsi/pdc_adma.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 9820f272f889..7999817915c3 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -46,7 +46,7 @@ #include #define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.01" +#define DRV_VERSION "0.03" /* macro to calculate base address for ATA regs */ #define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) @@ -79,7 +79,6 @@ enum { aNIEN = (1 << 8), /* irq mask: 1==masked */ aGO = (1 << 7), /* packet trigger ("Go!") */ aRSTADM = (1 << 5), /* ADMA logic reset */ - aRSTA = (1 << 2), /* ATA hard reset */ aPIOMD4 = 0x0003, /* PIO mode 4 */ /* ADMA_STATUS register bits */ @@ -452,24 +451,25 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) struct adma_port_priv *pp; struct ata_queued_cmd *qc; void __iomem *chan = ADMA_REGS(mmio_base, port_no); - u8 drv_stat, status = readb(chan + ADMA_STATUS); + u8 drv_stat = 0, status = readb(chan + ADMA_STATUS); if (status == 0) continue; handled = 1; adma_enter_reg_mode(ap); - if ((ap->flags & ATA_FLAG_PORT_DISABLED)) + if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)) continue; pp = ap->private_data; if (!pp || pp->state != adma_state_pkt) continue; qc = ata_qc_from_tag(ap, ap->active_tag); - drv_stat = 0; - if ((status & (aPERR | aPSD | aUIRQ))) - drv_stat = ATA_ERR; - else if (pp->pkt[0] != cDONE) - drv_stat = ATA_ERR; - ata_qc_complete(qc, drv_stat); + if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if ((status & (aPERR | aPSD | aUIRQ))) + drv_stat = ATA_ERR; + else if (pp->pkt[0] != cDONE) + drv_stat = ATA_ERR; + ata_qc_complete(qc, drv_stat); + } } return handled; } @@ -561,15 +561,15 @@ static int adma_port_start(struct ata_port *ap) if ((pp->pkt_dma & 7) != 0) { printk("bad alignment for pp->pkt_dma: %08x\n", (u32)pp->pkt_dma); - goto err_out_kfree2; + dma_free_coherent(dev, ADMA_PKT_BYTES, + pp->pkt, pp->pkt_dma); + goto err_out_kfree; } memset(pp->pkt, 0, ADMA_PKT_BYTES); ap->private_data = pp; adma_reinit_engine(ap); return 0; -err_out_kfree2: - kfree(pp); err_out_kfree: kfree(pp); err_out: -- GitLab From 00ac37f508689da281586c7ef304f26b5138d8a6 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Fri, 28 Oct 2005 15:58:28 -0400 Subject: [PATCH 0608/1519] [libata scsi] MODE SELECT, strengthen mode sense - move default mode pages to the front of libata-scsi.c so various functions can access them - partial annotation of these pages, point out divergence from sat-r06 - replace various mode page magic numbers with defines - strengthen MODE SENSE command decoding: handle DBD bit in cdb, yield block descriptor (per sat-r06) and handle mode sub pages Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 144 ++++++++++++++++++++++++++----------- 1 file changed, 103 insertions(+), 41 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index b761bd1b9717..89a04b1a5a0e 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -51,6 +51,45 @@ typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scs static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); +#define RW_RECOVERY_MPAGE 0x1 +#define RW_RECOVERY_MPAGE_LEN 12 +#define CACHE_MPAGE 0x8 +#define CACHE_MPAGE_LEN 20 +#define CONTROL_MPAGE 0xa +#define CONTROL_MPAGE_LEN 12 +#define ALL_MPAGES 0x3f +#define ALL_SUB_MPAGES 0xff + + +static const u8 def_rw_recovery_mpage[] = { + RW_RECOVERY_MPAGE, + RW_RECOVERY_MPAGE_LEN - 2, + (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */ + (1 << 6), /* ARRE (auto read reallocation) */ + 0, /* read retry count */ + 0, 0, 0, 0, + 0, /* write retry count */ + 0, 0, 0 +}; + +static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { + CACHE_MPAGE, + CACHE_MPAGE_LEN - 2, + 0, /* contains WCE, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, /* contains DRA, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0 +}; + +static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { + CONTROL_MPAGE, + CONTROL_MPAGE_LEN - 2, + 2, /* DSENSE=0, GLTSD=1 */ + 0, /* [QAM+QERR may be 1, see 05-359r1] */ + 0, 0, 0, 0, 0xff, 0xff, + 0, 30 /* extended self test time, see 05-359r1 */ +}; + static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) @@ -1583,13 +1622,9 @@ static void ata_msense_push(u8 **ptr_io, const u8 *last, static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, const u8 *last) { - u8 page[] = { - 0x8, /* page code */ - 0x12, /* page length */ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */ - 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */ - }; + u8 page[CACHE_MPAGE_LEN]; + memcpy(page, def_cache_mpage, sizeof(page)); if (ata_id_wcache_enabled(id)) page[2] |= (1 << 2); /* write cache enable */ if (!ata_id_rahead_enabled(id)) @@ -1613,15 +1648,9 @@ static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) { - const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30}; - - /* byte 2: set the descriptor format sense data bit (bit 2) - * since we need to support returning this format for SAT - * commands and any SCSI commands against a 48b LBA device. - */ - - ata_msense_push(ptr_io, last, page, sizeof(page)); - return sizeof(page); + ata_msense_push(ptr_io, last, def_control_mpage, + sizeof(def_control_mpage)); + return sizeof(def_control_mpage); } /** @@ -1638,15 +1667,10 @@ static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) { - const u8 page[] = { - 0x1, /* page code */ - 0xa, /* page length */ - (1 << 7) | (1 << 6), /* note auto r/w reallocation */ - 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */ - }; - ata_msense_push(ptr_io, last, page, sizeof(page)); - return sizeof(page); + ata_msense_push(ptr_io, last, def_rw_recovery_mpage, + sizeof(def_rw_recovery_mpage)); + return sizeof(def_rw_recovery_mpage); } /** @@ -1655,7 +1679,9 @@ static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * - * Simulate MODE SENSE commands. + * Simulate MODE SENSE commands. Assume this is invoked for direct + * access devices (e.g. disks) only. There should be no block + * descriptor for other device types. * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -1665,15 +1691,22 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { u8 *scsicmd = args->cmd->cmnd, *p, *last; - unsigned int page_control, six_byte, output_len; + const u8 sat_blk_desc[] = { + 0, 0, 0, 0, /* number of blocks: sat unspecified */ + 0, + 0, 0x2, 0x0 /* block length: 512 bytes */ + }; + u8 pg, spg; + unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen; VPRINTK("ENTER\n"); six_byte = (scsicmd[0] == MODE_SENSE); - - /* we only support saved and current values (which we treat - * in the same manner) + ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ + /* + * LLBA bit in msense(10) ignored (compliant) */ + page_control = scsicmd[2] >> 6; switch (page_control) { case 0: /* current */ @@ -1686,29 +1719,42 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, goto invalid_fld; } - if (six_byte) - output_len = 4; - else - output_len = 8; + if (six_byte) { + output_len = 4 + (ebd ? 8 : 0); + alloc_len = scsicmd[4]; + } else { + output_len = 8 + (ebd ? 8 : 0); + alloc_len = (scsicmd[7] << 8) + scsicmd[8]; + } + minlen = (alloc_len < buflen) ? alloc_len : buflen; p = rbuf + output_len; - last = rbuf + buflen - 1; + last = rbuf + minlen - 1; - switch(scsicmd[2] & 0x3f) { - case 0x01: /* r/w error recovery */ + pg = scsicmd[2] & 0x3f; + spg = scsicmd[3]; + /* + * No mode subpages supported (yet) but asking for _all_ + * subpages may be valid + */ + if (spg && (spg != ALL_SUB_MPAGES)) + goto invalid_fld; + + switch(pg) { + case RW_RECOVERY_MPAGE: output_len += ata_msense_rw_recovery(&p, last); break; - case 0x08: /* caching */ + case CACHE_MPAGE: output_len += ata_msense_caching(args->id, &p, last); break; - case 0x0a: { /* control mode */ + case CONTROL_MPAGE: { output_len += ata_msense_ctl_mode(&p, last); break; } - case 0x3f: /* all pages */ + case ALL_MPAGES: output_len += ata_msense_rw_recovery(&p, last); output_len += ata_msense_caching(args->id, &p, last); output_len += ata_msense_ctl_mode(&p, last); @@ -1718,15 +1764,31 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, goto invalid_fld; } + if (minlen < 1) + return 0; if (six_byte) { output_len--; rbuf[0] = output_len; + if (ebd) { + if (minlen > 3) + rbuf[3] = sizeof(sat_blk_desc); + if (minlen > 11) + memcpy(rbuf + 4, sat_blk_desc, + sizeof(sat_blk_desc)); + } } else { output_len -= 2; rbuf[0] = output_len >> 8; - rbuf[1] = output_len; + if (minlen > 1) + rbuf[1] = output_len; + if (ebd) { + if (minlen > 7) + rbuf[7] = sizeof(sat_blk_desc); + if (minlen > 15) + memcpy(rbuf + 8, sat_blk_desc, + sizeof(sat_blk_desc)); + } } - return 0; invalid_fld: @@ -2156,7 +2218,7 @@ ata_scsi_map_proto(u8 byte1) * Zero on success, non-zero on failure. */ static unsigned int -ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd) +ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) { struct ata_taskfile *tf = &(qc->tf); struct scsi_cmnd *cmd = qc->scsicmd; -- GitLab From a4e2b347848bf626b822599329933887dc90e50f Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 26 Oct 2005 15:46:52 -0700 Subject: [PATCH 0609/1519] [PATCH] tg3: add 5714/5715 support Add complete support for 5714/5715. These chips are very similar to 5780 so the changes are very trivial. A TG3_FLG2_5780_CLASS flag is added to identify these chips. Signed-off-by: Michael Chan Signed-off-by: Jeff Garzik --- drivers/net/tg3.c | 39 +++++++++++++++++++++++++-------------- drivers/net/tg3.h | 11 +++++++++-- include/linux/pci_ids.h | 2 ++ 3 files changed, 36 insertions(+), 16 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 1802c3b48799..cf2204f5b7f9 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -219,6 +219,10 @@ static struct pci_device_id tg3_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5714, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5715, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S, @@ -570,7 +574,7 @@ static void tg3_switch_clocks(struct tg3 *tp) u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL); u32 orig_clock_ctrl; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) return; orig_clock_ctrl = clock_ctrl; @@ -1210,7 +1214,7 @@ static int tg3_set_power_state(struct tg3 *tp, int state) CLOCK_CTRL_ALTCLK | CLOCK_CTRL_PWRDOWN_PLL133); udelay(40); - } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + } else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { /* do nothing */ } else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) && (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) { @@ -3712,14 +3716,14 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp, dev->mtu = new_mtu; if (new_mtu > ETH_DATA_LEN) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; ethtool_op_set_tso(dev, 0); } else tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE; } else { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE; } @@ -3850,7 +3854,7 @@ static void tg3_init_rings(struct tg3 *tp) memset(tp->tx_ring, 0, TG3_TX_RING_BYTES); tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ; - if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) && + if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) && (tp->dev->mtu > ETH_DATA_LEN)) tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ; @@ -4347,7 +4351,7 @@ static int tg3_chip_reset(struct tg3 *tp) val &= ~PCIX_CAPS_RELAXED_ORDERING; pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val); - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { u32 val; /* Chip reset on 5780 will reset MSI enable bit, @@ -6003,7 +6007,7 @@ static int tg3_reset_hw(struct tg3 *tp) tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK); if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) && - (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780)) + !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) limit = 8; else limit = 16; @@ -7237,7 +7241,7 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->supported |= (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full); - if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) + if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) cmd->supported |= (SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_10baseT_Half | @@ -8380,7 +8384,7 @@ static void __devinit tg3_get_nvram_info(struct tg3 *tp) } if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) || - (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)) { + (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) { switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) { case FLASH_VENDOR_ATMEL_FLASH_BUFFERED: tp->nvram_jedecnum = JEDEC_ATMEL; @@ -8980,7 +8984,7 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->phy_id = eeprom_phy_id; if (eeprom_phy_serdes) { - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) tp->tg3_flags2 |= TG3_FLG2_MII_SERDES; else tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES; @@ -9393,8 +9397,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) } /* Find msi capability. */ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + tp->tg3_flags2 |= TG3_FLG2_5780_CLASS; tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI); + } /* Initialize misc host control in PCI block. */ tp->misc_host_ctrl |= (misc_ctrl_reg & @@ -9412,7 +9419,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) + (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) tp->tg3_flags2 |= TG3_FLG2_5750_PLUS; if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) || @@ -9607,7 +9614,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) * ether_setup() via the alloc_etherdev() call */ if (tp->dev->mtu > ETH_DATA_LEN && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780) + !(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE; /* Determine WakeOnLan speed to use. */ @@ -9830,7 +9837,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) mac_offset = 0x7c; if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 && !(tp->tg3_flags & TG3_FLG2_SUN_570X)) || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { + (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) { if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID) mac_offset = 0xcc; if (tg3_nvram_lock(tp)) @@ -10148,6 +10155,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp) } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { /* 5780 always in PCIX mode */ tp->dma_rwctrl |= 0x00144000; + } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + /* 5714 always in PCIX mode */ + tp->dma_rwctrl |= 0x00148000; } else { tp->dma_rwctrl |= 0x001b000f; } @@ -10347,6 +10357,7 @@ static char * __devinit tg3_phy_string(struct tg3 *tp) case PHY_ID_BCM5705: return "5705"; case PHY_ID_BCM5750: return "5750"; case PHY_ID_BCM5752: return "5752"; + case PHY_ID_BCM5714: return "5714"; case PHY_ID_BCM5780: return "5780"; case PHY_ID_BCM8002: return "8002/serdes"; case 0: return "serdes"; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 2e733c60bfa4..456ef2b3d0ef 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -137,6 +137,7 @@ #define ASIC_REV_5750 0x04 #define ASIC_REV_5752 0x06 #define ASIC_REV_5780 0x08 +#define ASIC_REV_5714 0x09 #define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8) #define CHIPREV_5700_AX 0x70 #define CHIPREV_5700_BX 0x71 @@ -531,6 +532,8 @@ #define MAC_SERDES_CFG_EDGE_SELECT 0x00001000 #define MAC_SERDES_STAT 0x00000594 /* 0x598 --> 0x5b0 unused */ +#define SERDES_RX_CTRL 0x000005b0 /* 5780/5714 only */ +#define SERDES_RX_SIG_DETECT 0x00000400 #define SG_DIG_CTRL 0x000005b0 #define SG_DIG_USING_HW_AUTONEG 0x80000000 #define SG_DIG_SOFT_RESET 0x40000000 @@ -1329,6 +1332,8 @@ #define GRC_LCLCTRL_CLEARINT 0x00000002 #define GRC_LCLCTRL_SETINT 0x00000004 #define GRC_LCLCTRL_INT_ON_ATTN 0x00000008 +#define GRC_LCLCTRL_USE_SIG_DETECT 0x00000010 /* 5714/5780 only */ +#define GRC_LCLCTRL_USE_EXT_SIG_DETECT 0x00000020 /* 5714/5780 only */ #define GRC_LCLCTRL_GPIO_INPUT3 0x00000020 #define GRC_LCLCTRL_GPIO_OE3 0x00000040 #define GRC_LCLCTRL_GPIO_OUTPUT3 0x00000080 @@ -2175,6 +2180,7 @@ struct tg3 { TG3_FLG2_MII_SERDES) #define TG3_FLG2_PARALLEL_DETECT 0x01000000 #define TG3_FLG2_ICH_WORKAROUND 0x02000000 +#define TG3_FLG2_5780_CLASS 0x04000000 u32 split_mode_max_reqs; #define SPLIT_MODE_5704_MAX_REQ 3 @@ -2222,6 +2228,7 @@ struct tg3 { #define PHY_ID_BCM5705 0x600081a0 #define PHY_ID_BCM5750 0x60008180 #define PHY_ID_BCM5752 0x60008100 +#define PHY_ID_BCM5714 0x60008340 #define PHY_ID_BCM5780 0x60008350 #define PHY_ID_BCM8002 0x60010140 #define PHY_ID_INVALID 0xffffffff @@ -2246,8 +2253,8 @@ struct tg3 { (X) == PHY_ID_BCM5411 || (X) == PHY_ID_BCM5701 || \ (X) == PHY_ID_BCM5703 || (X) == PHY_ID_BCM5704 || \ (X) == PHY_ID_BCM5705 || (X) == PHY_ID_BCM5750 || \ - (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5780 || \ - (X) == PHY_ID_BCM8002) + (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \ + (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM8002) struct tg3_hw_stats *hw_stats; dma_addr_t stats_mapping; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 71834f05504f..d6865bbd9ea4 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2165,11 +2165,13 @@ #define PCI_DEVICE_ID_TIGON3_5721 0x1659 #define PCI_DEVICE_ID_TIGON3_5705M 0x165d #define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e +#define PCI_DEVICE_ID_TIGON3_5714 0x1668 #define PCI_DEVICE_ID_TIGON3_5780 0x166a #define PCI_DEVICE_ID_TIGON3_5780S 0x166b #define PCI_DEVICE_ID_TIGON3_5705F 0x166e #define PCI_DEVICE_ID_TIGON3_5750 0x1676 #define PCI_DEVICE_ID_TIGON3_5751 0x1677 +#define PCI_DEVICE_ID_TIGON3_5715 0x1678 #define PCI_DEVICE_ID_TIGON3_5750M 0x167c #define PCI_DEVICE_ID_TIGON3_5751M 0x167d #define PCI_DEVICE_ID_TIGON3_5751F 0x167e -- GitLab From 28fbef78a420acdea20570d31f3bdcbfa0cac0d2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 26 Oct 2005 15:48:35 -0700 Subject: [PATCH 0610/1519] [PATCH] tg3: fix ASF heartbeat Change the ASF heart beat to 5 seconds for faster detection of system crash. The driver sends the heartbeat every 2 seconds and the ASF firmware will timeout and reset the device if no heartbeat is received after 5 seconds. The old scheme of 2 minutes is ineffective. tg3_write_mem_fast() is added to speed up the IO to send the heartbeat. When no workaround is needed, it will use direct MMIO to memory space to write to memory. Signed-off-by: Michael Chan Signed-off-by: Jeff Garzik --- drivers/net/tg3.c | 21 ++++++++++++++++----- drivers/net/tg3.h | 1 + 2 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index cf2204f5b7f9..479be21425fb 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -470,6 +470,15 @@ static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val) spin_unlock_irqrestore(&tp->indirect_lock, flags); } +static void tg3_write_mem_fast(struct tg3 *tp, u32 off, u32 val) +{ + /* If no workaround is needed, write to mem space directly */ + if (tp->write32 != tg3_write_indirect_reg32) + tw32(NIC_SRAM_WIN_BASE + off, val); + else + tg3_write_mem(tp, off, val); +} + static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val) { unsigned long flags; @@ -6195,14 +6204,16 @@ static void tg3_timer(unsigned long __opaque) tp->timer_counter = tp->timer_multiplier; } - /* Heartbeat is only sent once every 120 seconds. */ + /* Heartbeat is only sent once every 2 seconds. */ if (!--tp->asf_counter) { if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) { u32 val; - tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_ALIVE); - tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4); - tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 3); + tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_MBOX, + FWCMD_NICDRV_ALIVE2); + tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4); + /* 5 seconds timeout */ + tg3_write_mem_fast(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5); val = tr32(GRC_RX_CPU_EVENT); val |= (1 << 14); tw32(GRC_RX_CPU_EVENT, val); @@ -6413,7 +6424,7 @@ static int tg3_open(struct net_device *dev) tp->timer_counter = tp->timer_multiplier = (HZ / tp->timer_offset); tp->asf_counter = tp->asf_multiplier = - ((HZ / tp->timer_offset) * 120); + ((HZ / tp->timer_offset) * 2); init_timer(&tp->timer); tp->timer.expires = jiffies + tp->timer_offset; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 456ef2b3d0ef..fb7e2a5f4a08 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1512,6 +1512,7 @@ #define FWCMD_NICDRV_IPV6ADDR_CHG 0x00000004 #define FWCMD_NICDRV_FIX_DMAR 0x00000005 #define FWCMD_NICDRV_FIX_DMAW 0x00000006 +#define FWCMD_NICDRV_ALIVE2 0x0000000d #define NIC_SRAM_FW_CMD_LEN_MBOX 0x00000b7c #define NIC_SRAM_FW_CMD_DATA_MBOX 0x00000b80 #define NIC_SRAM_FW_ASF_STATUS_MBOX 0x00000c00 -- GitLab From 37ff238d68683d42e7363eee3303773906c336d9 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 26 Oct 2005 15:49:51 -0700 Subject: [PATCH 0611/1519] [PATCH] tg3: update version and minor fixes Update version and reldate and add more sanity checking to tg3_set_settings(). Signed-off-by: Gary Zambrano Signed-off-by: Michael Chan Signed-off-by: Jeff Garzik --- drivers/net/tg3.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 479be21425fb..551c9449322d 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -67,8 +67,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.42" -#define DRV_MODULE_RELDATE "Oct 3, 2005" +#define DRV_MODULE_VERSION "3.43" +#define DRV_MODULE_RELDATE "Oct 24, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -7279,7 +7279,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct tg3 *tp = netdev_priv(dev); - if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) { + if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) { /* These are the only valid advertisement bits allowed. */ if (cmd->autoneg == AUTONEG_ENABLE && (cmd->advertising & ~(ADVERTISED_1000baseT_Half | @@ -7287,7 +7287,17 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) ADVERTISED_Autoneg | ADVERTISED_FIBRE))) return -EINVAL; - } + /* Fiber can only do SPEED_1000. */ + else if ((cmd->autoneg != AUTONEG_ENABLE) && + (cmd->speed != SPEED_1000)) + return -EINVAL; + /* Copper cannot force SPEED_1000. */ + } else if ((cmd->autoneg != AUTONEG_ENABLE) && + (cmd->speed == SPEED_1000)) + return -EINVAL; + else if ((cmd->speed == SPEED_1000) && + (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY)) + return -EINVAL; tg3_full_lock(tp, 0); -- GitLab From 0abe791e94033b727f2b55670c2966f3d3d3cf70 Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:46:53 -0600 Subject: [PATCH 0612/1519] [PATCH] ibmveth fix bonding This patch updates dev->trans_start and dev->last_rx so that the ibmveth driver can be used with the ARP monitor in the bonding driver. Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index a2c4dd4fb221..5617bec7fd53 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -725,6 +725,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) } else { adapter->stats.tx_packets++; adapter->stats.tx_bytes += skb->len; + netdev->trans_start = jiffies; } do { @@ -776,6 +777,7 @@ static int ibmveth_poll(struct net_device *netdev, int *budget) adapter->stats.rx_packets++; adapter->stats.rx_bytes += length; frames_processed++; + netdev->last_rx = jiffies; } } else { more_work = 0; -- GitLab From b6d35182fe62e57d368062adcc880ca35119d88e Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:47:01 -0600 Subject: [PATCH 0613/1519] [PATCH] ibmveth fix buffer pool management This patch changes the way the ibmveth driver handles the receive buffers. The old code mallocs and maps all the buffers in the pools regardless of MTU size and it also limits the number of buffer pools to three. This patch makes the driver malloc and map the buffers necessary to support the current MTU. It also changes the hardcoded names of the buffer pool number, size, and elements to arrays to make it easier to change (with the hope of making them runtime parameters in the future). Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 102 ++++++++++++++++++++++++++++++------------ drivers/net/ibmveth.h | 18 +++++--- 2 files changed, 85 insertions(+), 35 deletions(-) diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 5617bec7fd53..d985b804a762 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -97,6 +97,7 @@ static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter); static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter); static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter*); +static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter); #ifdef CONFIG_PROC_FS #define IBMVETH_PROC_DIR "net/ibmveth" @@ -181,6 +182,7 @@ static int ibmveth_alloc_buffer_pool(struct ibmveth_buff_pool *pool) atomic_set(&pool->available, 0); pool->producer_index = 0; pool->consumer_index = 0; + pool->active = 0; return 0; } @@ -258,9 +260,14 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc /* check if replenishing is needed. */ static inline int ibmveth_is_replenishing_needed(struct ibmveth_adapter *adapter) { - return ((atomic_read(&adapter->rx_buff_pool[0].available) < adapter->rx_buff_pool[0].threshold) || - (atomic_read(&adapter->rx_buff_pool[1].available) < adapter->rx_buff_pool[1].threshold) || - (atomic_read(&adapter->rx_buff_pool[2].available) < adapter->rx_buff_pool[2].threshold)); + int i; + + for(i = 0; i < IbmVethNumBufferPools; i++) + if(adapter->rx_buff_pool[i].active && + (atomic_read(&adapter->rx_buff_pool[i].available) < + adapter->rx_buff_pool[i].threshold)) + return 1; + return 0; } /* kick the replenish tasklet if we need replenishing and it isn't already running */ @@ -275,11 +282,14 @@ static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter *adapter /* replenish tasklet routine */ static void ibmveth_replenish_task(struct ibmveth_adapter *adapter) { + int i; + adapter->replenish_task_cycles++; - ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[0]); - ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[1]); - ibmveth_replenish_buffer_pool(adapter, &adapter->rx_buff_pool[2]); + for(i = 0; i < IbmVethNumBufferPools; i++) + if(adapter->rx_buff_pool[i].active) + ibmveth_replenish_buffer_pool(adapter, + &adapter->rx_buff_pool[i]); adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8); @@ -321,6 +331,7 @@ static void ibmveth_free_buffer_pool(struct ibmveth_adapter *adapter, struct ibm kfree(pool->skbuff); pool->skbuff = NULL; } + pool->active = 0; } /* remove a buffer from a pool */ @@ -379,6 +390,12 @@ static void ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter) ibmveth_assert(pool < IbmVethNumBufferPools); ibmveth_assert(index < adapter->rx_buff_pool[pool].size); + if(!adapter->rx_buff_pool[pool].active) { + ibmveth_rxq_harvest_buffer(adapter); + ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[pool]); + return; + } + desc.desc = 0; desc.fields.valid = 1; desc.fields.length = adapter->rx_buff_pool[pool].buff_size; @@ -409,6 +426,8 @@ static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter) static void ibmveth_cleanup(struct ibmveth_adapter *adapter) { + int i; + if(adapter->buffer_list_addr != NULL) { if(!dma_mapping_error(adapter->buffer_list_dma)) { dma_unmap_single(&adapter->vdev->dev, @@ -443,26 +462,24 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter) adapter->rx_queue.queue_addr = NULL; } - ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[0]); - ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[1]); - ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[2]); + for(i = 0; irx_buff_pool[i]); } static int ibmveth_open(struct net_device *netdev) { struct ibmveth_adapter *adapter = netdev->priv; u64 mac_address = 0; - int rxq_entries; + int rxq_entries = 1; unsigned long lpar_rc; int rc; union ibmveth_buf_desc rxq_desc; + int i; ibmveth_debug_printk("open starting\n"); - rxq_entries = - adapter->rx_buff_pool[0].size + - adapter->rx_buff_pool[1].size + - adapter->rx_buff_pool[2].size + 1; + for(i = 0; irx_buff_pool[i].size; adapter->buffer_list_addr = (void*) get_zeroed_page(GFP_KERNEL); adapter->filter_list_addr = (void*) get_zeroed_page(GFP_KERNEL); @@ -502,14 +519,8 @@ static int ibmveth_open(struct net_device *netdev) adapter->rx_queue.num_slots = rxq_entries; adapter->rx_queue.toggle = 1; - if(ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[0]) || - ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[1]) || - ibmveth_alloc_buffer_pool(&adapter->rx_buff_pool[2])) - { - ibmveth_error_printk("unable to allocate buffer pools\n"); - ibmveth_cleanup(adapter); - return -ENOMEM; - } + /* call change_mtu to init the buffer pools based in initial mtu */ + ibmveth_change_mtu(netdev, netdev->mtu); memcpy(&mac_address, netdev->dev_addr, netdev->addr_len); mac_address = mac_address >> 16; @@ -885,17 +896,52 @@ static void ibmveth_set_multicast_list(struct net_device *netdev) static int ibmveth_change_mtu(struct net_device *dev, int new_mtu) { - if ((new_mtu < 68) || (new_mtu > (1<<20))) + struct ibmveth_adapter *adapter = dev->priv; + int i; + int prev_smaller = 1; + + if ((new_mtu < 68) || + (new_mtu > (pool_size[IbmVethNumBufferPools-1]) - IBMVETH_BUFF_OH)) return -EINVAL; + + for(i = 0; i (pool_size[i] - IBMVETH_BUFF_OH)) { + activate = 1; + prev_smaller= 1; + } else { + if (prev_smaller) + activate = 1; + prev_smaller= 0; + } + + if (activate && !adapter->rx_buff_pool[i].active) { + struct ibmveth_buff_pool *pool = + &adapter->rx_buff_pool[i]; + if(ibmveth_alloc_buffer_pool(pool)) { + ibmveth_error_printk("unable to alloc pool\n"); + return -ENOMEM; + } + adapter->rx_buff_pool[i].active = 1; + } else if (!activate && adapter->rx_buff_pool[i].active) { + adapter->rx_buff_pool[i].active = 0; + h_free_logical_lan_buffer(adapter->vdev->unit_address, + (u64)pool_size[i]); + } + + } + + + ibmveth_schedule_replenishing(adapter); dev->mtu = new_mtu; return 0; } static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) { - int rc; + int rc, i; struct net_device *netdev; - struct ibmveth_adapter *adapter; + struct ibmveth_adapter *adapter = NULL; unsigned char *mac_addr_p; unsigned int *mcastFilterSize_p; @@ -965,9 +1011,9 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_ memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len); - ibmveth_init_buffer_pool(&adapter->rx_buff_pool[0], 0, IbmVethPool0DftCnt, IbmVethPool0DftSize); - ibmveth_init_buffer_pool(&adapter->rx_buff_pool[1], 1, IbmVethPool1DftCnt, IbmVethPool1DftSize); - ibmveth_init_buffer_pool(&adapter->rx_buff_pool[2], 2, IbmVethPool2DftCnt, IbmVethPool2DftSize); + for(i = 0; irx_buff_pool[i], i, + pool_count[i], pool_size[i]); ibmveth_debug_printk("adapter @ 0x%p\n", adapter); diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h index 51a470da9686..a5d27a9cdf1f 100644 --- a/drivers/net/ibmveth.h +++ b/drivers/net/ibmveth.h @@ -49,6 +49,7 @@ #define H_SEND_LOGICAL_LAN 0x120 #define H_MULTICAST_CTRL 0x130 #define H_CHANGE_LOGICAL_LAN_MAC 0x14C +#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 /* hcall macros */ #define h_register_logical_lan(ua, buflst, rxq, fltlst, mac) \ @@ -69,13 +70,15 @@ #define h_change_logical_lan_mac(ua, mac) \ plpar_hcall_norets(H_CHANGE_LOGICAL_LAN_MAC, ua, mac) -#define IbmVethNumBufferPools 3 -#define IbmVethPool0DftSize (1024 * 2) -#define IbmVethPool1DftSize (1024 * 4) -#define IbmVethPool2DftSize (1024 * 10) -#define IbmVethPool0DftCnt 256 -#define IbmVethPool1DftCnt 256 -#define IbmVethPool2DftCnt 256 +#define h_free_logical_lan_buffer(ua, bufsize) \ + plpar_hcall_norets(H_FREE_LOGICAL_LAN_BUFFER, ua, bufsize) + +#define IbmVethNumBufferPools 5 +#define IBMVETH_BUFF_OH 22 /* Overhead: 14 ethernet header + 8 opaque handle */ + +/* pool_size should be sorted */ +static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 }; +static int pool_count[] = { 256, 768, 256, 256, 256 }; #define IBM_VETH_INVALID_MAP ((u16)0xffff) @@ -90,6 +93,7 @@ struct ibmveth_buff_pool { u16 *free_map; dma_addr_t *dma_addr; struct sk_buff **skbuff; + int active; }; struct ibmveth_rx_q { -- GitLab From e2adbcb480992de8a01acf9218e8bbd9b507fc6f Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:47:08 -0600 Subject: [PATCH 0614/1519] [PATCH] ibmveth fix buffer replenishing This patch removes the allocation of RX skb's buffers from a workqueue to be called directly at RX processing time. This change was suggested by Dave Miller when the driver was starving the RX buffers and deadlocking under heavy traffic: > Allocating RX SKBs via tasklet is, IMHO, the worst way to > do it. It is no surprise that there are starvation cases. > > If tasklets or work queues get delayed in any way, you lose, > and it's very easy for a card to catch up with the driver RX'ing > packets very fast, no matter how aggressive you make the > replenishing. By the time you detect that you need to be > "more aggressive" it is already too late. > The only pseudo-reliable way is to allocate at RX processing time. > Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 48 ++++++++----------------------------------- drivers/net/ibmveth.h | 4 ---- 2 files changed, 8 insertions(+), 44 deletions(-) diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index d985b804a762..aea1598b2253 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -96,7 +96,6 @@ static void ibmveth_proc_unregister_driver(void); static void ibmveth_proc_register_adapter(struct ibmveth_adapter *adapter); static void ibmveth_proc_unregister_adapter(struct ibmveth_adapter *adapter); static irqreturn_t ibmveth_interrupt(int irq, void *dev_instance, struct pt_regs *regs); -static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter*); static inline void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter); #ifdef CONFIG_PROC_FS @@ -257,29 +256,7 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc atomic_add(buffers_added, &(pool->available)); } -/* check if replenishing is needed. */ -static inline int ibmveth_is_replenishing_needed(struct ibmveth_adapter *adapter) -{ - int i; - - for(i = 0; i < IbmVethNumBufferPools; i++) - if(adapter->rx_buff_pool[i].active && - (atomic_read(&adapter->rx_buff_pool[i].available) < - adapter->rx_buff_pool[i].threshold)) - return 1; - return 0; -} - -/* kick the replenish tasklet if we need replenishing and it isn't already running */ -static inline void ibmveth_schedule_replenishing(struct ibmveth_adapter *adapter) -{ - if(ibmveth_is_replenishing_needed(adapter) && - (atomic_dec_if_positive(&adapter->not_replenishing) == 0)) { - schedule_work(&adapter->replenish_task); - } -} - -/* replenish tasklet routine */ +/* replenish routine */ static void ibmveth_replenish_task(struct ibmveth_adapter *adapter) { int i; @@ -292,10 +269,6 @@ static void ibmveth_replenish_task(struct ibmveth_adapter *adapter) &adapter->rx_buff_pool[i]); adapter->rx_no_buffer = *(u64*)(((char*)adapter->buffer_list_addr) + 4096 - 8); - - atomic_inc(&adapter->not_replenishing); - - ibmveth_schedule_replenishing(adapter); } /* empty and free ana buffer pool - also used to do cleanup in error paths */ @@ -563,10 +536,10 @@ static int ibmveth_open(struct net_device *netdev) return rc; } - netif_start_queue(netdev); + ibmveth_debug_printk("initial replenish cycle\n"); + ibmveth_replenish_task(adapter); - ibmveth_debug_printk("scheduling initial replenish cycle\n"); - ibmveth_schedule_replenishing(adapter); + netif_start_queue(netdev); ibmveth_debug_printk("open complete\n"); @@ -584,9 +557,6 @@ static int ibmveth_close(struct net_device *netdev) free_irq(netdev->irq, netdev); - cancel_delayed_work(&adapter->replenish_task); - flush_scheduled_work(); - do { lpar_rc = h_free_logical_lan(adapter->vdev->unit_address); } while (H_isLongBusy(lpar_rc) || (lpar_rc == H_Busy)); @@ -795,7 +765,7 @@ static int ibmveth_poll(struct net_device *netdev, int *budget) } } while(more_work && (frames_processed < max_frames_to_process)); - ibmveth_schedule_replenishing(adapter); + ibmveth_replenish_task(adapter); if(more_work) { /* more work to do - return that we are not done yet */ @@ -931,8 +901,10 @@ static int ibmveth_change_mtu(struct net_device *dev, int new_mtu) } + /* kick the interrupt handler so that the new buffer pools get + replenished or deallocated */ + ibmveth_interrupt(dev->irq, dev, NULL); - ibmveth_schedule_replenishing(adapter); dev->mtu = new_mtu; return 0; } @@ -1017,14 +989,10 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_ ibmveth_debug_printk("adapter @ 0x%p\n", adapter); - INIT_WORK(&adapter->replenish_task, (void*)ibmveth_replenish_task, (void*)adapter); - adapter->buffer_list_dma = DMA_ERROR_CODE; adapter->filter_list_dma = DMA_ERROR_CODE; adapter->rx_queue.queue_dma = DMA_ERROR_CODE; - atomic_set(&adapter->not_replenishing, 1); - ibmveth_debug_printk("registering netdev...\n"); rc = register_netdev(netdev); diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h index a5d27a9cdf1f..a3ea02937d63 100644 --- a/drivers/net/ibmveth.h +++ b/drivers/net/ibmveth.h @@ -118,10 +118,6 @@ struct ibmveth_adapter { dma_addr_t filter_list_dma; struct ibmveth_buff_pool rx_buff_pool[IbmVethNumBufferPools]; struct ibmveth_rx_q rx_queue; - atomic_t not_replenishing; - - /* helper tasks */ - struct work_struct replenish_task; /* adapter specific stats */ u64 replenish_task_cycles; -- GitLab From 60296d9e4be1cd9e096f7804ce6e839e0cbd97cf Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:47:16 -0600 Subject: [PATCH 0615/1519] [PATCH] ibmveth lockless TX This patch adds the lockless TX feature to the ibmveth driver. The hypervisor has its own locking so the only change that is necessary is to protect the statistics counters. Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 44 ++++++++++++++++++++++++++++--------------- drivers/net/ibmveth.h | 1 + 2 files changed, 30 insertions(+), 15 deletions(-) diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index aea1598b2253..987bcba01889 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -621,12 +621,18 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) unsigned long lpar_rc; int nfrags = 0, curfrag; unsigned long correlator; + unsigned long flags; unsigned int retry_count; + unsigned int tx_dropped = 0; + unsigned int tx_bytes = 0; + unsigned int tx_packets = 0; + unsigned int tx_send_failed = 0; + unsigned int tx_map_failed = 0; + if ((skb_shinfo(skb)->nr_frags + 1) > IbmVethMaxSendFrags) { - adapter->stats.tx_dropped++; - dev_kfree_skb(skb); - return 0; + tx_dropped++; + goto out; } memset(&desc, 0, sizeof(desc)); @@ -645,10 +651,9 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) if(dma_mapping_error(desc[0].fields.address)) { ibmveth_error_printk("tx: unable to map initial fragment\n"); - adapter->tx_map_failed++; - adapter->stats.tx_dropped++; - dev_kfree_skb(skb); - return 0; + tx_map_failed++; + tx_dropped++; + goto out; } curfrag = nfrags; @@ -665,8 +670,8 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) if(dma_mapping_error(desc[curfrag+1].fields.address)) { ibmveth_error_printk("tx: unable to map fragment %d\n", curfrag); - adapter->tx_map_failed++; - adapter->stats.tx_dropped++; + tx_map_failed++; + tx_dropped++; /* Free all the mappings we just created */ while(curfrag < nfrags) { dma_unmap_single(&adapter->vdev->dev, @@ -675,8 +680,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) DMA_TO_DEVICE); curfrag++; } - dev_kfree_skb(skb); - return 0; + goto out; } } @@ -701,11 +705,11 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) ibmveth_error_printk("tx: desc[%i] valid=%d, len=%d, address=0x%d\n", i, desc[i].fields.valid, desc[i].fields.length, desc[i].fields.address); } - adapter->tx_send_failed++; - adapter->stats.tx_dropped++; + tx_send_failed++; + tx_dropped++; } else { - adapter->stats.tx_packets++; - adapter->stats.tx_bytes += skb->len; + tx_packets++; + tx_bytes += skb->len; netdev->trans_start = jiffies; } @@ -715,6 +719,14 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) desc[nfrags].fields.length, DMA_TO_DEVICE); } while(--nfrags >= 0); +out: spin_lock_irqsave(&adapter->stats_lock, flags); + adapter->stats.tx_dropped += tx_dropped; + adapter->stats.tx_bytes += tx_bytes; + adapter->stats.tx_packets += tx_packets; + adapter->tx_send_failed += tx_send_failed; + adapter->tx_map_failed += tx_map_failed; + spin_unlock_irqrestore(&adapter->stats_lock, flags); + dev_kfree_skb(skb); return 0; } @@ -980,6 +992,8 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_ netdev->ethtool_ops = &netdev_ethtool_ops; netdev->change_mtu = ibmveth_change_mtu; SET_NETDEV_DEV(netdev, &dev->dev); + netdev->features |= NETIF_F_LLTX; + spin_lock_init(&adapter->stats_lock); memcpy(&netdev->dev_addr, &adapter->mac_addr, netdev->addr_len); diff --git a/drivers/net/ibmveth.h b/drivers/net/ibmveth.h index a3ea02937d63..46919a814fca 100644 --- a/drivers/net/ibmveth.h +++ b/drivers/net/ibmveth.h @@ -131,6 +131,7 @@ struct ibmveth_adapter { u64 tx_linearize_failed; u64 tx_map_failed; u64 tx_send_failed; + spinlock_t stats_lock; }; struct ibmveth_buf_desc_fields { -- GitLab From 82702d37a559cf94fe238cd3f8ef63cf7fa699a9 Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 26 Oct 2005 10:47:23 -0600 Subject: [PATCH 0616/1519] [PATCH] ibmveth fix failed addbuf This patch fixes a bug that happens when the hypervisor can't add a buffer. The old code wrote IBM_VETH_INVALID_MAP into the free_map array, so next time the index was used, a ibmveth_assert() caught it and called BUG(). The patch writes the right value into the free_map array so that the index can be reused. Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 987bcba01889..f5819527ec9d 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -237,7 +237,7 @@ static void ibmveth_replenish_buffer_pool(struct ibmveth_adapter *adapter, struc lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc); if(lpar_rc != H_Success) { - pool->free_map[free_index] = IBM_VETH_INVALID_MAP; + pool->free_map[free_index] = index; pool->skbuff[index] = NULL; pool->consumer_index--; dma_unmap_single(&adapter->vdev->dev, -- GitLab From d89a64bedf956ef0b406018a7cb76e027fe3e751 Mon Sep 17 00:00:00 2001 From: Komuro Date: Fri, 28 Oct 2005 16:09:54 -0400 Subject: [PATCH 0617/1519] pcnet_cs: fix mii init code for older DL10019 based cards Some older DL10019 based cards need to setup the auto-negotiation-advertisement register to advertise 100Full,100Half,10Full and 10Half. Signed-off-by: Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/pcnet_cs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 9f22d138e3ad..818c185d6438 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1020,6 +1020,12 @@ static void set_misc_reg(struct net_device *dev) } else { outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG); } + } else if (info->flags & IS_DL10019) { + /* Advertise 100F, 100H, 10F, 10H */ + mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1); + /* Restart MII autonegotiation */ + mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); + mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); } } -- GitLab From 008d55903a1e9e179ff1d366dfcfa9b72abd116d Mon Sep 17 00:00:00 2001 From: Roger While Date: Fri, 28 Oct 2005 16:11:49 -0400 Subject: [PATCH 0618/1519] [wireless prism54] Fix frame length prism54 is leaking information when passing transmits to the firmware. There is no requirement to adjust the length to >= ETH_ZLEN. Just pass the skb length (after possible adjustment). Signed-off-by: Roger While Signed-off-by: Jeff Garzik --- drivers/net/wireless/prism54/islpci_eth.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 5952e9960499..0975dd4ed77d 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -97,12 +97,6 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) /* lock the driver code */ spin_lock_irqsave(&priv->slock, flags); - /* determine the amount of fragments needed to store the frame */ - - frame_size = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - if (init_wds) - frame_size += 6; - /* check whether the destination queue has enough fragments for the frame */ curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]); if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) { @@ -213,6 +207,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) /* store the skb address for future freeing */ priv->data_low_tx[index] = skb; /* set the proper fragment start address and size information */ + frame_size = skb->len; fragment->size = cpu_to_le16(frame_size); fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */ fragment->address = cpu_to_le32(pci_map_address); -- GitLab From 9eb343aeb3e106c1e4c07e2863f45b2c121b3b78 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 21 Oct 2005 19:06:42 +0900 Subject: [PATCH 0619/1519] [PATCH] s2io: kconfig help fix The documentation about s2io is available at Documentation/networking/s2io.txt. Signed-off-by: Akinobu Mita Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5148d47492a0..8fa0e26fa805 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2201,8 +2201,8 @@ config S2IO depends on PCI ---help--- This driver supports the 10Gbe XFrame NIC of S2IO. - For help regarding driver compilation, installation and - tuning please look into ~/drivers/net/s2io/README.txt. + More specific information on configuring the driver is in + . config S2IO_NAPI bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" -- GitLab From adf6e00064ebcd3d82009ba6ef66f489f0885ebd Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 4 Oct 2005 11:25:17 -0600 Subject: [PATCH 0620/1519] [PATCH] b44 reports wrong advertised flags Looks like someone used the MII constants instead of the ethtool constants. Signed-off-by: Matthew Wilcox Signed-off-by: Jeff Garzik --- drivers/net/b44.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 282ebd15f011..225d14fd9239 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1619,14 +1619,14 @@ static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->advertising = 0; if (bp->flags & B44_FLAG_ADV_10HALF) - cmd->advertising |= ADVERTISE_10HALF; + cmd->advertising |= ADVERTISED_10baseT_Half; if (bp->flags & B44_FLAG_ADV_10FULL) - cmd->advertising |= ADVERTISE_10FULL; + cmd->advertising |= ADVERTISED_10baseT_Full; if (bp->flags & B44_FLAG_ADV_100HALF) - cmd->advertising |= ADVERTISE_100HALF; + cmd->advertising |= ADVERTISED_100baseT_Half; if (bp->flags & B44_FLAG_ADV_100FULL) - cmd->advertising |= ADVERTISE_100FULL; - cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + cmd->advertising |= ADVERTISED_100baseT_Full; + cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ? SPEED_100 : SPEED_10; cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ? -- GitLab From 8fee5f51a56aa7a67d955993572a2ae05d31a2c6 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Wed, 5 Oct 2005 23:29:58 +0200 Subject: [PATCH 0621/1519] [PATCH] sis190.c: fix multicast MAC filter Here is a patch that changes the way the MAC filter is computed for the multicast addresses. The computation is taken from the SiS GPL driver. This patch is necessary to get IPv6 working. Signed-off-by: Aurelien Jarno Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 92f75529eff8..478791e09bf7 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -842,7 +842,7 @@ static void sis190_set_rx_mode(struct net_device *dev) for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) { int bit_nr = - ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f; mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); rx_mode |= AcceptMulticast; } -- GitLab From 99e1baf869cf20791e66e38facd51d14b28551f8 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 5 Oct 2005 11:10:24 -0400 Subject: [PATCH 0622/1519] [PATCH] smc91x: shut down power after probing If the interface is not used right away after being probed it wastes power needlessly. Noted by Holger Schurig. Signed-off-by: Nicolas Pitre Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 1438fdd20826..c5bc8ae84dd3 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1983,6 +1983,10 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) if (lp->version >= (CHIP_91100 << 4)) smc_phy_detect(dev); + /* then shut everything down to save power */ + smc_shutdown(dev); + smc_phy_powerdown(dev); + /* Set default parameters */ lp->msg_enable = NETIF_MSG_LINK; lp->ctl_rfduplx = 0; -- GitLab From 712cb1ebb1653538527500165d8382ca48a7fca1 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Sun, 23 Oct 2005 13:41:35 -0700 Subject: [PATCH 0623/1519] [PATCH] Fix CS89x0 KConfig for IXDP2X01 IXDP2x01 systems can be built without PCI network cards, so we should not require NET_PCI to build CS89x0 on these systems. Signed-off-by: Deepak Saxena Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8fa0e26fa805..814a93b8c903 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1338,7 +1338,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 + depends on (NET_PCI && ISA) || ARCH_PNX0105 || ARCH_IXDP2X01 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the -- GitLab From d8840ac907c7943bc7e196b11812adfa95cb28ef Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 7 Oct 2005 02:05:23 +0400 Subject: [PATCH 0624/1519] [PATCH] starfire: free_irq() on error path of netdev_open() Signed-off-by: Alexey Dobriyan Signed-off-by: Jeff Garzik --- drivers/net/starfire.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index efdb179ecc8c..38b2b0a3ce96 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1091,8 +1091,10 @@ static int netdev_open(struct net_device *dev) rx_ring_size = sizeof(struct starfire_rx_desc) * RX_RING_SIZE; np->queue_mem_size = tx_done_q_size + rx_done_q_size + tx_ring_size + rx_ring_size; np->queue_mem = pci_alloc_consistent(np->pci_dev, np->queue_mem_size, &np->queue_mem_dma); - if (np->queue_mem == 0) + if (np->queue_mem == NULL) { + free_irq(dev->irq, dev); return -ENOMEM; + } np->tx_done_q = np->queue_mem; np->tx_done_q_dma = np->queue_mem_dma; -- GitLab From 48257c4f168e5d040394aeca4d37b59f68e0d36b Mon Sep 17 00:00:00 2001 From: Pantelis Antoniou Date: Fri, 28 Oct 2005 16:25:58 -0400 Subject: [PATCH 0625/1519] Add fs_enet ethernet network driver, for several embedded platforms. --- drivers/net/Kconfig | 1 + drivers/net/Makefile | 3 + drivers/net/fs_enet/Kconfig | 20 + drivers/net/fs_enet/Makefile | 10 + drivers/net/fs_enet/fs_enet-main.c | 1226 ++++++++++++++++++++++++++++ drivers/net/fs_enet/fs_enet-mii.c | 507 ++++++++++++ drivers/net/fs_enet/fs_enet.h | 245 ++++++ drivers/net/fs_enet/mac-fcc.c | 578 +++++++++++++ drivers/net/fs_enet/mac-fec.c | 653 +++++++++++++++ drivers/net/fs_enet/mac-scc.c | 524 ++++++++++++ drivers/net/fs_enet/mii-bitbang.c | 405 +++++++++ drivers/net/fs_enet/mii-fixed.c | 92 +++ include/linux/fs_enet_pd.h | 136 +++ 13 files changed, 4400 insertions(+) create mode 100644 drivers/net/fs_enet/Kconfig create mode 100644 drivers/net/fs_enet/Makefile create mode 100644 drivers/net/fs_enet/fs_enet-main.c create mode 100644 drivers/net/fs_enet/fs_enet-mii.c create mode 100644 drivers/net/fs_enet/fs_enet.h create mode 100644 drivers/net/fs_enet/mac-fcc.c create mode 100644 drivers/net/fs_enet/mac-fec.c create mode 100644 drivers/net/fs_enet/mac-scc.c create mode 100644 drivers/net/fs_enet/mii-bitbang.c create mode 100644 drivers/net/fs_enet/mii-fixed.c create mode 100644 include/linux/fs_enet_pd.h diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 814a93b8c903..27732fdeeea4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1775,6 +1775,7 @@ config NE_H8300 controller on the Renesas H8/300 processor. source "drivers/net/fec_8xx/Kconfig" +source "drivers/net/fs_enet/Kconfig" endmenu diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1a84e0435f64..7c313cb341b8 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -203,3 +203,6 @@ obj-$(CONFIG_IRDA) += irda/ obj-$(CONFIG_ETRAX_ETHERNET) += cris/ obj-$(CONFIG_NETCONSOLE) += netconsole.o + +obj-$(CONFIG_FS_ENET) += fs_enet/ + diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig new file mode 100644 index 000000000000..6aaee67dd4b7 --- /dev/null +++ b/drivers/net/fs_enet/Kconfig @@ -0,0 +1,20 @@ +config FS_ENET + tristate "Freescale Ethernet Driver" + depends on NET_ETHERNET && (CPM1 || CPM2) + select MII + +config FS_ENET_HAS_SCC + bool "Chip has an SCC usable for ethernet" + depends on FS_ENET && (CPM1 || CPM2) + default y + +config FS_ENET_HAS_FCC + bool "Chip has an FCC usable for ethernet" + depends on FS_ENET && CPM2 + default y + +config FS_ENET_HAS_FEC + bool "Chip has an FEC usable for ethernet" + depends on FS_ENET && CPM1 + default y + diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile new file mode 100644 index 000000000000..d6dd3f2fb43e --- /dev/null +++ b/drivers/net/fs_enet/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the Freescale Ethernet controllers +# + +obj-$(CONFIG_FS_ENET) += fs_enet.o + +obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o +obj-$(CONFIG_8260) += mac-fcc.o + +fs_enet-objs := fs_enet-main.o fs_enet-mii.o mii-bitbang.o mii-fixed.o diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c new file mode 100644 index 000000000000..44fac7373289 --- /dev/null +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -0,0 +1,1226 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * Heavily based on original FEC driver by Dan Malek + * and modifications by Joakim Tjernlund + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +/*************************************************/ + +static char version[] __devinitdata = + DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n"; + +MODULE_AUTHOR("Pantelis Antoniou "); +MODULE_DESCRIPTION("Freescale Ethernet Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +MODULE_PARM(fs_enet_debug, "i"); +MODULE_PARM_DESC(fs_enet_debug, + "Freescale bitmapped debugging message enable value"); + +int fs_enet_debug = -1; /* -1 == use FS_ENET_DEF_MSG_ENABLE as value */ + +static void fs_set_multicast_list(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + (*fep->ops->set_multicast_list)(dev); +} + +/* NAPI receive function */ +static int fs_enet_rx_napi(struct net_device *dev, int *budget) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + cbd_t *bdp; + struct sk_buff *skb, *skbn, *skbt; + int received = 0; + u16 pkt_len, sc; + int curidx; + int rx_work_limit = 0; /* pacify gcc */ + + rx_work_limit = min(dev->quota, *budget); + + if (!netif_running(dev)) + return 0; + + /* + * First, grab all of the stats for the incoming packet. + * These get messed up if we get called due to a busy condition. + */ + bdp = fep->cur_rx; + + /* clear RX status bits for napi*/ + (*fep->ops->napi_clear_rx_event)(dev); + + while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) { + + curidx = bdp - fep->rx_bd_base; + + /* + * Since we have allocated space to hold a complete frame, + * the last indicator should be set. + */ + if ((sc & BD_ENET_RX_LAST) == 0) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s rcv is not +last\n", + dev->name); + + /* + * Check for errors. + */ + if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL | + BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) { + fep->stats.rx_errors++; + /* Frame too long or too short. */ + if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) + fep->stats.rx_length_errors++; + /* Frame alignment */ + if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL)) + fep->stats.rx_frame_errors++; + /* CRC Error */ + if (sc & BD_ENET_RX_CR) + fep->stats.rx_crc_errors++; + /* FIFO overrun */ + if (sc & BD_ENET_RX_OV) + fep->stats.rx_crc_errors++; + + skb = fep->rx_skbuff[curidx]; + + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + skbn = skb; + + } else { + + /* napi, got packet but no quota */ + if (--rx_work_limit < 0) + break; + + skb = fep->rx_skbuff[curidx]; + + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + /* + * Process the incoming frame. + */ + fep->stats.rx_packets++; + pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */ + fep->stats.rx_bytes += pkt_len + 4; + + if (pkt_len <= fpi->rx_copybreak) { + /* +2 to make IP header L1 cache aligned */ + skbn = dev_alloc_skb(pkt_len + 2); + if (skbn != NULL) { + skb_reserve(skbn, 2); /* align IP header */ + memcpy(skbn->data, skb->data, pkt_len); + /* swap */ + skbt = skb; + skb = skbn; + skbn = skbt; + } + } else + skbn = dev_alloc_skb(ENET_RX_FRSIZE); + + if (skbn != NULL) { + skb->dev = dev; + skb_put(skb, pkt_len); /* Make room */ + skb->protocol = eth_type_trans(skb, dev); + received++; + netif_receive_skb(skb); + } else { + printk(KERN_WARNING DRV_MODULE_NAME + ": %s Memory squeeze, dropping packet.\n", + dev->name); + fep->stats.rx_dropped++; + skbn = skb; + } + } + + fep->rx_skbuff[curidx] = skbn; + CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE)); + CBDW_DATLEN(bdp, 0); + CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY); + + /* + * Update BD pointer to next entry. + */ + if ((sc & BD_ENET_RX_WRAP) == 0) + bdp++; + else + bdp = fep->rx_bd_base; + + (*fep->ops->rx_bd_done)(dev); + } + + fep->cur_rx = bdp; + + dev->quota -= received; + *budget -= received; + + if (rx_work_limit < 0) + return 1; /* not done */ + + /* done */ + netif_rx_complete(dev); + + (*fep->ops->napi_enable_rx)(dev); + + return 0; +} + +/* non NAPI receive function */ +static int fs_enet_rx_non_napi(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + cbd_t *bdp; + struct sk_buff *skb, *skbn, *skbt; + int received = 0; + u16 pkt_len, sc; + int curidx; + /* + * First, grab all of the stats for the incoming packet. + * These get messed up if we get called due to a busy condition. + */ + bdp = fep->cur_rx; + + while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) { + + curidx = bdp - fep->rx_bd_base; + + /* + * Since we have allocated space to hold a complete frame, + * the last indicator should be set. + */ + if ((sc & BD_ENET_RX_LAST) == 0) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s rcv is not +last\n", + dev->name); + + /* + * Check for errors. + */ + if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL | + BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) { + fep->stats.rx_errors++; + /* Frame too long or too short. */ + if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) + fep->stats.rx_length_errors++; + /* Frame alignment */ + if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL)) + fep->stats.rx_frame_errors++; + /* CRC Error */ + if (sc & BD_ENET_RX_CR) + fep->stats.rx_crc_errors++; + /* FIFO overrun */ + if (sc & BD_ENET_RX_OV) + fep->stats.rx_crc_errors++; + + skb = fep->rx_skbuff[curidx]; + + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + skbn = skb; + + } else { + + skb = fep->rx_skbuff[curidx]; + + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + /* + * Process the incoming frame. + */ + fep->stats.rx_packets++; + pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */ + fep->stats.rx_bytes += pkt_len + 4; + + if (pkt_len <= fpi->rx_copybreak) { + /* +2 to make IP header L1 cache aligned */ + skbn = dev_alloc_skb(pkt_len + 2); + if (skbn != NULL) { + skb_reserve(skbn, 2); /* align IP header */ + memcpy(skbn->data, skb->data, pkt_len); + /* swap */ + skbt = skb; + skb = skbn; + skbn = skbt; + } + } else + skbn = dev_alloc_skb(ENET_RX_FRSIZE); + + if (skbn != NULL) { + skb->dev = dev; + skb_put(skb, pkt_len); /* Make room */ + skb->protocol = eth_type_trans(skb, dev); + received++; + netif_rx(skb); + } else { + printk(KERN_WARNING DRV_MODULE_NAME + ": %s Memory squeeze, dropping packet.\n", + dev->name); + fep->stats.rx_dropped++; + skbn = skb; + } + } + + fep->rx_skbuff[curidx] = skbn; + CBDW_BUFADDR(bdp, dma_map_single(fep->dev, skbn->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE)); + CBDW_DATLEN(bdp, 0); + CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY); + + /* + * Update BD pointer to next entry. + */ + if ((sc & BD_ENET_RX_WRAP) == 0) + bdp++; + else + bdp = fep->rx_bd_base; + + (*fep->ops->rx_bd_done)(dev); + } + + fep->cur_rx = bdp; + + return 0; +} + +static void fs_enet_tx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + cbd_t *bdp; + struct sk_buff *skb; + int dirtyidx, do_wake, do_restart; + u16 sc; + + spin_lock(&fep->lock); + bdp = fep->dirty_tx; + + do_wake = do_restart = 0; + while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) { + + dirtyidx = bdp - fep->tx_bd_base; + + if (fep->tx_free == fep->tx_ring) + break; + + skb = fep->tx_skbuff[dirtyidx]; + + /* + * Check for errors. + */ + if (sc & (BD_ENET_TX_HB | BD_ENET_TX_LC | + BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) { + + if (sc & BD_ENET_TX_HB) /* No heartbeat */ + fep->stats.tx_heartbeat_errors++; + if (sc & BD_ENET_TX_LC) /* Late collision */ + fep->stats.tx_window_errors++; + if (sc & BD_ENET_TX_RL) /* Retrans limit */ + fep->stats.tx_aborted_errors++; + if (sc & BD_ENET_TX_UN) /* Underrun */ + fep->stats.tx_fifo_errors++; + if (sc & BD_ENET_TX_CSL) /* Carrier lost */ + fep->stats.tx_carrier_errors++; + + if (sc & (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) { + fep->stats.tx_errors++; + do_restart = 1; + } + } else + fep->stats.tx_packets++; + + if (sc & BD_ENET_TX_READY) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s HEY! Enet xmit interrupt and TX_READY.\n", + dev->name); + + /* + * Deferred means some collisions occurred during transmit, + * but we eventually sent the packet OK. + */ + if (sc & BD_ENET_TX_DEF) + fep->stats.collisions++; + + /* unmap */ + dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE); + + /* + * Free the sk buffer associated with this last transmit. + */ + dev_kfree_skb_irq(skb); + fep->tx_skbuff[dirtyidx] = NULL; + + /* + * Update pointer to next buffer descriptor to be transmitted. + */ + if ((sc & BD_ENET_TX_WRAP) == 0) + bdp++; + else + bdp = fep->tx_bd_base; + + /* + * Since we have freed up a buffer, the ring is no longer + * full. + */ + if (!fep->tx_free++) + do_wake = 1; + } + + fep->dirty_tx = bdp; + + if (do_restart) + (*fep->ops->tx_restart)(dev); + + spin_unlock(&fep->lock); + + if (do_wake) + netif_wake_queue(dev); +} + +/* + * The interrupt handler. + * This is called from the MPC core interrupt. + */ +static irqreturn_t +fs_enet_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct fs_enet_private *fep; + const struct fs_platform_info *fpi; + u32 int_events; + u32 int_clr_events; + int nr, napi_ok; + int handled; + + fep = netdev_priv(dev); + fpi = fep->fpi; + + nr = 0; + while ((int_events = (*fep->ops->get_int_events)(dev)) != 0) { + + nr++; + + int_clr_events = int_events; + if (fpi->use_napi) + int_clr_events &= ~fep->ev_napi_rx; + + (*fep->ops->clear_int_events)(dev, int_clr_events); + + if (int_events & fep->ev_err) + (*fep->ops->ev_error)(dev, int_events); + + if (int_events & fep->ev_rx) { + if (!fpi->use_napi) + fs_enet_rx_non_napi(dev); + else { + napi_ok = netif_rx_schedule_prep(dev); + + (*fep->ops->napi_disable_rx)(dev); + (*fep->ops->clear_int_events)(dev, fep->ev_napi_rx); + + /* NOTE: it is possible for FCCs in NAPI mode */ + /* to submit a spurious interrupt while in poll */ + if (napi_ok) + __netif_rx_schedule(dev); + } + } + + if (int_events & fep->ev_tx) + fs_enet_tx(dev); + } + + handled = nr > 0; + return IRQ_RETVAL(handled); +} + +void fs_init_bds(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + cbd_t *bdp; + struct sk_buff *skb; + int i; + + fs_cleanup_bds(dev); + + fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; + fep->tx_free = fep->tx_ring; + fep->cur_rx = fep->rx_bd_base; + + /* + * Initialize the receive buffer descriptors. + */ + for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) { + skb = dev_alloc_skb(ENET_RX_FRSIZE); + if (skb == NULL) { + printk(KERN_WARNING DRV_MODULE_NAME + ": %s Memory squeeze, unable to allocate skb\n", + dev->name); + break; + } + fep->rx_skbuff[i] = skb; + skb->dev = dev; + CBDW_BUFADDR(bdp, + dma_map_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE)); + CBDW_DATLEN(bdp, 0); /* zero */ + CBDW_SC(bdp, BD_ENET_RX_EMPTY | + ((i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP)); + } + /* + * if we failed, fillup remainder + */ + for (; i < fep->rx_ring; i++, bdp++) { + fep->rx_skbuff[i] = NULL; + CBDW_SC(bdp, (i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP); + } + + /* + * ...and the same for transmit. + */ + for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) { + fep->tx_skbuff[i] = NULL; + CBDW_BUFADDR(bdp, 0); + CBDW_DATLEN(bdp, 0); + CBDW_SC(bdp, (i < fep->tx_ring - 1) ? 0 : BD_SC_WRAP); + } +} + +void fs_cleanup_bds(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct sk_buff *skb; + int i; + + /* + * Reset SKB transmit buffers. + */ + for (i = 0; i < fep->tx_ring; i++) { + if ((skb = fep->tx_skbuff[i]) == NULL) + continue; + + /* unmap */ + dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE); + + fep->tx_skbuff[i] = NULL; + dev_kfree_skb(skb); + } + + /* + * Reset SKB receive buffers + */ + for (i = 0; i < fep->rx_ring; i++) { + if ((skb = fep->rx_skbuff[i]) == NULL) + continue; + + /* unmap */ + dma_unmap_single(fep->dev, skb->data, + L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), + DMA_FROM_DEVICE); + + fep->rx_skbuff[i] = NULL; + + dev_kfree_skb(skb); + } +} + +/**********************************************************************************/ + +static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + cbd_t *bdp; + int curidx; + u16 sc; + unsigned long flags; + + spin_lock_irqsave(&fep->tx_lock, flags); + + /* + * Fill in a Tx ring entry + */ + bdp = fep->cur_tx; + + if (!fep->tx_free || (CBDR_SC(bdp) & BD_ENET_TX_READY)) { + netif_stop_queue(dev); + spin_unlock_irqrestore(&fep->tx_lock, flags); + + /* + * Ooops. All transmit buffers are full. Bail out. + * This should not happen, since the tx queue should be stopped. + */ + printk(KERN_WARNING DRV_MODULE_NAME + ": %s tx queue full!.\n", dev->name); + return NETDEV_TX_BUSY; + } + + curidx = bdp - fep->tx_bd_base; + /* + * Clear all of the status flags. + */ + CBDC_SC(bdp, BD_ENET_TX_STATS); + + /* + * Save skb pointer. + */ + fep->tx_skbuff[curidx] = skb; + + fep->stats.tx_bytes += skb->len; + + /* + * Push the data cache so the CPM does not get stale memory data. + */ + CBDW_BUFADDR(bdp, dma_map_single(fep->dev, + skb->data, skb->len, DMA_TO_DEVICE)); + CBDW_DATLEN(bdp, skb->len); + + dev->trans_start = jiffies; + + /* + * If this was the last BD in the ring, start at the beginning again. + */ + if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0) + fep->cur_tx++; + else + fep->cur_tx = fep->tx_bd_base; + + if (!--fep->tx_free) + netif_stop_queue(dev); + + /* Trigger transmission start */ + sc = BD_ENET_TX_READY | BD_ENET_TX_INTR | + BD_ENET_TX_LAST | BD_ENET_TX_TC; + + /* note that while FEC does not have this bit + * it marks it as available for software use + * yay for hw reuse :) */ + if (skb->len <= 60) + sc |= BD_ENET_TX_PAD; + CBDS_SC(bdp, sc); + + (*fep->ops->tx_kickstart)(dev); + + spin_unlock_irqrestore(&fep->tx_lock, flags); + + return NETDEV_TX_OK; +} + +static int fs_request_irq(struct net_device *dev, int irq, const char *name, + irqreturn_t (*irqf)(int irq, void *dev_id, struct pt_regs *regs)) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + (*fep->ops->pre_request_irq)(dev, irq); + return request_irq(irq, irqf, SA_SHIRQ, name, dev); +} + +static void fs_free_irq(struct net_device *dev, int irq) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + free_irq(irq, dev); + (*fep->ops->post_free_irq)(dev, irq); +} + +/**********************************************************************************/ + +/* This interrupt occurs when the PHY detects a link change. */ +static irqreturn_t +fs_mii_link_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct fs_enet_private *fep; + const struct fs_platform_info *fpi; + + fep = netdev_priv(dev); + fpi = fep->fpi; + + /* + * Acknowledge the interrupt if possible. If we have not + * found the PHY yet we can't process or acknowledge the + * interrupt now. Instead we ignore this interrupt for now, + * which we can do since it is edge triggered. It will be + * acknowledged later by fs_enet_open(). + */ + if (!fep->phy) + return IRQ_NONE; + + fs_mii_ack_int(dev); + fs_mii_link_status_change_check(dev, 0); + + return IRQ_HANDLED; +} + +static void fs_timeout(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + int wake = 0; + + fep->stats.tx_errors++; + + spin_lock_irqsave(&fep->lock, flags); + + if (dev->flags & IFF_UP) { + (*fep->ops->stop)(dev); + (*fep->ops->restart)(dev); + } + + wake = fep->tx_free && !(CBDR_SC(fep->cur_tx) & BD_ENET_TX_READY); + spin_unlock_irqrestore(&fep->lock, flags); + + if (wake) + netif_wake_queue(dev); +} + +static int fs_enet_open(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + int r; + + /* Install our interrupt handler. */ + r = fs_request_irq(dev, fep->interrupt, "fs_enet-mac", fs_enet_interrupt); + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s Could not allocate FEC IRQ!", dev->name); + return -EINVAL; + } + + /* Install our phy interrupt handler */ + if (fpi->phy_irq != -1) { + + r = fs_request_irq(dev, fpi->phy_irq, "fs_enet-phy", fs_mii_link_interrupt); + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s Could not allocate PHY IRQ!", dev->name); + fs_free_irq(dev, fep->interrupt); + return -EINVAL; + } + } + + fs_mii_startup(dev); + netif_carrier_off(dev); + fs_mii_link_status_change_check(dev, 1); + + return 0; +} + +static int fs_enet_close(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + unsigned long flags; + + netif_stop_queue(dev); + netif_carrier_off(dev); + fs_mii_shutdown(dev); + + spin_lock_irqsave(&fep->lock, flags); + (*fep->ops->stop)(dev); + spin_unlock_irqrestore(&fep->lock, flags); + + /* release any irqs */ + if (fpi->phy_irq != -1) + fs_free_irq(dev, fpi->phy_irq); + fs_free_irq(dev, fep->interrupt); + + return 0; +} + +static struct net_device_stats *fs_enet_get_stats(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + return &fep->stats; +} + +/*************************************************************************/ + +static void fs_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_MODULE_NAME); + strcpy(info->version, DRV_MODULE_VERSION); +} + +static int fs_get_regs_len(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + return (*fep->ops->get_regs_len)(dev); +} + +static void fs_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + int r, len; + + len = regs->len; + + spin_lock_irqsave(&fep->lock, flags); + r = (*fep->ops->get_regs)(dev, p, &len); + spin_unlock_irqrestore(&fep->lock, flags); + + if (r == 0) + regs->version = 0; +} + +static int fs_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + int rc; + + spin_lock_irqsave(&fep->lock, flags); + rc = mii_ethtool_gset(&fep->mii_if, cmd); + spin_unlock_irqrestore(&fep->lock, flags); + + return rc; +} + +static int fs_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct fs_enet_private *fep = netdev_priv(dev); + unsigned long flags; + int rc; + + spin_lock_irqsave(&fep->lock, flags); + rc = mii_ethtool_sset(&fep->mii_if, cmd); + spin_unlock_irqrestore(&fep->lock, flags); + + return rc; +} + +static int fs_nway_reset(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + return mii_nway_restart(&fep->mii_if); +} + +static u32 fs_get_msglevel(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + return fep->msg_enable; +} + +static void fs_set_msglevel(struct net_device *dev, u32 value) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fep->msg_enable = value; +} + +static struct ethtool_ops fs_ethtool_ops = { + .get_drvinfo = fs_get_drvinfo, + .get_regs_len = fs_get_regs_len, + .get_settings = fs_get_settings, + .set_settings = fs_set_settings, + .nway_reset = fs_nway_reset, + .get_link = ethtool_op_get_link, + .get_msglevel = fs_get_msglevel, + .set_msglevel = fs_set_msglevel, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, /* local! */ + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_regs = fs_get_regs, +}; + +static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data; + unsigned long flags; + int rc; + + if (!netif_running(dev)) + return -EINVAL; + + spin_lock_irqsave(&fep->lock, flags); + rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL); + spin_unlock_irqrestore(&fep->lock, flags); + return rc; +} + +extern int fs_mii_connect(struct net_device *dev); +extern void fs_mii_disconnect(struct net_device *dev); + +static struct net_device *fs_init_instance(struct device *dev, + const struct fs_platform_info *fpi) +{ + struct net_device *ndev = NULL; + struct fs_enet_private *fep = NULL; + int privsize, i, r, err = 0, registered = 0; + + /* guard */ + if ((unsigned int)fpi->fs_no >= FS_MAX_INDEX) + return ERR_PTR(-EINVAL); + + privsize = sizeof(*fep) + (sizeof(struct sk_buff **) * + (fpi->rx_ring + fpi->tx_ring)); + + ndev = alloc_etherdev(privsize); + if (!ndev) { + err = -ENOMEM; + goto err; + } + SET_MODULE_OWNER(ndev); + + fep = netdev_priv(ndev); + memset(fep, 0, privsize); /* clear everything */ + + fep->dev = dev; + dev_set_drvdata(dev, ndev); + fep->fpi = fpi; + if (fpi->init_ioports) + fpi->init_ioports(); + +#ifdef CONFIG_FS_ENET_HAS_FEC + if (fs_get_fec_index(fpi->fs_no) >= 0) + fep->ops = &fs_fec_ops; +#endif + +#ifdef CONFIG_FS_ENET_HAS_SCC + if (fs_get_scc_index(fpi->fs_no) >=0 ) + fep->ops = &fs_scc_ops; +#endif + +#ifdef CONFIG_FS_ENET_HAS_FCC + if (fs_get_fcc_index(fpi->fs_no) >= 0) + fep->ops = &fs_fcc_ops; +#endif + + if (fep->ops == NULL) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s No matching ops found (%d).\n", + ndev->name, fpi->fs_no); + err = -EINVAL; + goto err; + } + + r = (*fep->ops->setup_data)(ndev); + if (r != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s setup_data failed\n", + ndev->name); + err = r; + goto err; + } + + /* point rx_skbuff, tx_skbuff */ + fep->rx_skbuff = (struct sk_buff **)&fep[1]; + fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring; + + /* init locks */ + spin_lock_init(&fep->lock); + spin_lock_init(&fep->tx_lock); + + /* + * Set the Ethernet address. + */ + for (i = 0; i < 6; i++) + ndev->dev_addr[i] = fpi->macaddr[i]; + + r = (*fep->ops->allocate_bd)(ndev); + + if (fep->ring_base == NULL) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s buffer descriptor alloc failed (%d).\n", ndev->name, r); + err = r; + goto err; + } + + /* + * Set receive and transmit descriptor base. + */ + fep->rx_bd_base = fep->ring_base; + fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring; + + /* initialize ring size variables */ + fep->tx_ring = fpi->tx_ring; + fep->rx_ring = fpi->rx_ring; + + /* + * The FEC Ethernet specific entries in the device structure. + */ + ndev->open = fs_enet_open; + ndev->hard_start_xmit = fs_enet_start_xmit; + ndev->tx_timeout = fs_timeout; + ndev->watchdog_timeo = 2 * HZ; + ndev->stop = fs_enet_close; + ndev->get_stats = fs_enet_get_stats; + ndev->set_multicast_list = fs_set_multicast_list; + if (fpi->use_napi) { + ndev->poll = fs_enet_rx_napi; + ndev->weight = fpi->napi_weight; + } + ndev->ethtool_ops = &fs_ethtool_ops; + ndev->do_ioctl = fs_ioctl; + + init_timer(&fep->phy_timer_list); + + netif_carrier_off(ndev); + + err = register_netdev(ndev); + if (err != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s register_netdev failed.\n", ndev->name); + goto err; + } + registered = 1; + + err = fs_mii_connect(ndev); + if (err != 0) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s fs_mii_connect failed.\n", ndev->name); + goto err; + } + + return ndev; + + err: + if (ndev != NULL) { + + if (registered) + unregister_netdev(ndev); + + if (fep != NULL) { + (*fep->ops->free_bd)(ndev); + (*fep->ops->cleanup_data)(ndev); + } + + free_netdev(ndev); + } + + dev_set_drvdata(dev, NULL); + + return ERR_PTR(err); +} + +static int fs_cleanup_instance(struct net_device *ndev) +{ + struct fs_enet_private *fep; + const struct fs_platform_info *fpi; + struct device *dev; + + if (ndev == NULL) + return -EINVAL; + + fep = netdev_priv(ndev); + if (fep == NULL) + return -EINVAL; + + fpi = fep->fpi; + + fs_mii_disconnect(ndev); + + unregister_netdev(ndev); + + dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t), + fep->ring_base, fep->ring_mem_addr); + + /* reset it */ + (*fep->ops->cleanup_data)(ndev); + + dev = fep->dev; + if (dev != NULL) { + dev_set_drvdata(dev, NULL); + fep->dev = NULL; + } + + free_netdev(ndev); + + return 0; +} + +/**************************************************************************************/ + +/* handy pointer to the immap */ +void *fs_enet_immap = NULL; + +static int setup_immap(void) +{ + phys_addr_t paddr = 0; + unsigned long size = 0; + +#ifdef CONFIG_CPM1 + paddr = IMAP_ADDR; + size = 0x10000; /* map 64K */ +#endif + +#ifdef CONFIG_CPM2 + paddr = CPM_MAP_ADDR; + size = 0x40000; /* map 256 K */ +#endif + fs_enet_immap = ioremap(paddr, size); + if (fs_enet_immap == NULL) + return -EBADF; /* XXX ahem; maybe just BUG_ON? */ + + return 0; +} + +static void cleanup_immap(void) +{ + if (fs_enet_immap != NULL) { + iounmap(fs_enet_immap); + fs_enet_immap = NULL; + } +} + +/**************************************************************************************/ + +static int __devinit fs_enet_probe(struct device *dev) +{ + struct net_device *ndev; + + /* no fixup - no device */ + if (dev->platform_data == NULL) { + printk(KERN_INFO "fs_enet: " + "probe called with no platform data; " + "remove unused devices\n"); + return -ENODEV; + } + + ndev = fs_init_instance(dev, dev->platform_data); + if (IS_ERR(ndev)) + return PTR_ERR(ndev); + return 0; +} + +static int fs_enet_remove(struct device *dev) +{ + return fs_cleanup_instance(dev_get_drvdata(dev)); +} + +static struct device_driver fs_enet_fec_driver = { + .name = "fsl-cpm-fec", + .bus = &platform_bus_type, + .probe = fs_enet_probe, + .remove = fs_enet_remove, +#ifdef CONFIG_PM +/* .suspend = fs_enet_suspend, TODO */ +/* .resume = fs_enet_resume, TODO */ +#endif +}; + +static struct device_driver fs_enet_scc_driver = { + .name = "fsl-cpm-scc", + .bus = &platform_bus_type, + .probe = fs_enet_probe, + .remove = fs_enet_remove, +#ifdef CONFIG_PM +/* .suspend = fs_enet_suspend, TODO */ +/* .resume = fs_enet_resume, TODO */ +#endif +}; + +static struct device_driver fs_enet_fcc_driver = { + .name = "fsl-cpm-fcc", + .bus = &platform_bus_type, + .probe = fs_enet_probe, + .remove = fs_enet_remove, +#ifdef CONFIG_PM +/* .suspend = fs_enet_suspend, TODO */ +/* .resume = fs_enet_resume, TODO */ +#endif +}; + +static int __init fs_init(void) +{ + int r; + + printk(KERN_INFO + "%s", version); + + r = setup_immap(); + if (r != 0) + return r; + r = driver_register(&fs_enet_fec_driver); + if (r != 0) + goto err; + + r = driver_register(&fs_enet_fcc_driver); + if (r != 0) + goto err; + + r = driver_register(&fs_enet_scc_driver); + if (r != 0) + goto err; + + return 0; +err: + cleanup_immap(); + return r; + +} + +static void __exit fs_cleanup(void) +{ + driver_unregister(&fs_enet_fec_driver); + driver_unregister(&fs_enet_fcc_driver); + driver_unregister(&fs_enet_scc_driver); + cleanup_immap(); +} + +/**************************************************************************************/ + +module_init(fs_init); +module_exit(fs_cleanup); diff --git a/drivers/net/fs_enet/fs_enet-mii.c b/drivers/net/fs_enet/fs_enet-mii.c new file mode 100644 index 000000000000..c6770377ef87 --- /dev/null +++ b/drivers/net/fs_enet/fs_enet-mii.c @@ -0,0 +1,507 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * Heavily based on original FEC driver by Dan Malek + * and modifications by Joakim Tjernlund + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +/*************************************************/ + +/* + * Generic PHY support. + * Should work for all PHYs, but link change is detected by polling + */ + +static void generic_timer_callback(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct fs_enet_private *fep = netdev_priv(dev); + + fep->phy_timer_list.expires = jiffies + HZ / 2; + + add_timer(&fep->phy_timer_list); + + fs_mii_link_status_change_check(dev, 0); +} + +static void generic_startup(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */ + fep->phy_timer_list.data = (unsigned long)dev; + fep->phy_timer_list.function = generic_timer_callback; + add_timer(&fep->phy_timer_list); +} + +static void generic_shutdown(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + del_timer_sync(&fep->phy_timer_list); +} + +/* ------------------------------------------------------------------------- */ +/* The Davicom DM9161 is used on the NETTA board */ + +/* register definitions */ + +#define MII_DM9161_ANAR 4 /* Aux. Config Register */ +#define MII_DM9161_ACR 16 /* Aux. Config Register */ +#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */ +#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */ +#define MII_DM9161_INTR 21 /* Interrupt Register */ +#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */ +#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */ + +static void dm9161_startup(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000); + /* Start autonegotiation */ + fs_mii_write(dev, fep->mii_if.phy_id, MII_BMCR, 0x1200); + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HZ*8); +} + +static void dm9161_ack_int(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fs_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR); +} + +static void dm9161_shutdown(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fs_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00); +} + +/**********************************************************************************/ + +static const struct phy_info phy_info[] = { + { + .id = 0x00181b88, + .name = "DM9161", + .startup = dm9161_startup, + .ack_int = dm9161_ack_int, + .shutdown = dm9161_shutdown, + }, { + .id = 0, + .name = "GENERIC", + .startup = generic_startup, + .shutdown = generic_shutdown, + }, +}; + +/**********************************************************************************/ + +static int phy_id_detect(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + struct fs_enet_mii_bus *bus = fep->mii_bus; + int i, r, start, end, phytype, physubtype; + const struct phy_info *phy; + int phy_hwid, phy_id; + + phy_hwid = -1; + fep->phy = NULL; + + /* auto-detect? */ + if (fpi->phy_addr == -1) { + start = 1; + end = 32; + } else { /* direct */ + start = fpi->phy_addr; + end = start + 1; + } + + for (phy_id = start; phy_id < end; phy_id++) { + /* skip already used phy addresses on this bus */ + if (bus->usage_map & (1 << phy_id)) + continue; + r = fs_mii_read(dev, phy_id, MII_PHYSID1); + if (r == -1 || (phytype = (r & 0xffff)) == 0xffff) + continue; + r = fs_mii_read(dev, phy_id, MII_PHYSID2); + if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff) + continue; + phy_hwid = (phytype << 16) | physubtype; + if (phy_hwid != -1) + break; + } + + if (phy_hwid == -1) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s No PHY detected! range=0x%02x-0x%02x\n", + dev->name, start, end); + return -1; + } + + for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++) + if (phy->id == (phy_hwid >> 4) || phy->id == 0) + break; + + if (i >= ARRAY_SIZE(phy_info)) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s PHY id 0x%08x is not supported!\n", + dev->name, phy_hwid); + return -1; + } + + fep->phy = phy; + + /* mark this address as used */ + bus->usage_map |= (1 << phy_id); + + printk(KERN_INFO DRV_MODULE_NAME + ": %s Phy @ 0x%x, type %s (0x%08x)%s\n", + dev->name, phy_id, fep->phy->name, phy_hwid, + fpi->phy_addr == -1 ? " (auto-detected)" : ""); + + return phy_id; +} + +void fs_mii_startup(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (fep->phy->startup) + (*fep->phy->startup) (dev); +} + +void fs_mii_shutdown(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (fep->phy->shutdown) + (*fep->phy->shutdown) (dev); +} + +void fs_mii_ack_int(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (fep->phy->ack_int) + (*fep->phy->ack_int) (dev); +} + +#define MII_LINK 0x0001 +#define MII_HALF 0x0002 +#define MII_FULL 0x0004 +#define MII_BASE4 0x0008 +#define MII_10M 0x0010 +#define MII_100M 0x0020 +#define MII_1G 0x0040 +#define MII_10G 0x0080 + +/* return full mii info at one gulp, with a usable form */ +static unsigned int mii_full_status(struct mii_if_info *mii) +{ + unsigned int status; + int bmsr, adv, lpa, neg; + struct fs_enet_private* fep = netdev_priv(mii->dev); + + /* first, a dummy read, needed to latch some MII phys */ + (void)mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); + bmsr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); + + /* no link */ + if ((bmsr & BMSR_LSTATUS) == 0) + return 0; + + status = MII_LINK; + + /* Lets look what ANEG says if it's supported - otherwize we shall + take the right values from the platform info*/ + if(!mii->force_media) { + /* autoneg not completed; don't bother */ + if ((bmsr & BMSR_ANEGCOMPLETE) == 0) + return 0; + + adv = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_ADVERTISE); + lpa = (*mii->mdio_read)(mii->dev, mii->phy_id, MII_LPA); + + neg = lpa & adv; + } else { + neg = fep->fpi->bus_info->lpa; + } + + if (neg & LPA_100FULL) + status |= MII_FULL | MII_100M; + else if (neg & LPA_100BASE4) + status |= MII_FULL | MII_BASE4 | MII_100M; + else if (neg & LPA_100HALF) + status |= MII_HALF | MII_100M; + else if (neg & LPA_10FULL) + status |= MII_FULL | MII_10M; + else + status |= MII_HALF | MII_10M; + + return status; +} + +void fs_mii_link_status_change_check(struct net_device *dev, int init_media) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct mii_if_info *mii = &fep->mii_if; + unsigned int mii_status; + int ok_to_print, link, duplex, speed; + unsigned long flags; + + ok_to_print = netif_msg_link(fep); + + mii_status = mii_full_status(mii); + + if (!init_media && mii_status == fep->last_mii_status) + return; + + fep->last_mii_status = mii_status; + + link = !!(mii_status & MII_LINK); + duplex = !!(mii_status & MII_FULL); + speed = (mii_status & MII_100M) ? 100 : 10; + + if (link == 0) { + netif_carrier_off(mii->dev); + netif_stop_queue(dev); + if (!init_media) { + spin_lock_irqsave(&fep->lock, flags); + (*fep->ops->stop)(dev); + spin_unlock_irqrestore(&fep->lock, flags); + } + + if (ok_to_print) + printk(KERN_INFO "%s: link down\n", mii->dev->name); + + } else { + + mii->full_duplex = duplex; + + netif_carrier_on(mii->dev); + + spin_lock_irqsave(&fep->lock, flags); + fep->duplex = duplex; + fep->speed = speed; + (*fep->ops->restart)(dev); + spin_unlock_irqrestore(&fep->lock, flags); + + netif_start_queue(dev); + + if (ok_to_print) + printk(KERN_INFO "%s: link up, %dMbps, %s-duplex\n", + dev->name, speed, duplex ? "full" : "half"); + } +} + +/**********************************************************************************/ + +int fs_mii_read(struct net_device *dev, int phy_id, int location) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct fs_enet_mii_bus *bus = fep->mii_bus; + + unsigned long flags; + int ret; + + spin_lock_irqsave(&bus->mii_lock, flags); + ret = (*bus->mii_read)(bus, phy_id, location); + spin_unlock_irqrestore(&bus->mii_lock, flags); + + return ret; +} + +void fs_mii_write(struct net_device *dev, int phy_id, int location, int value) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct fs_enet_mii_bus *bus = fep->mii_bus; + unsigned long flags; + + spin_lock_irqsave(&bus->mii_lock, flags); + (*bus->mii_write)(bus, phy_id, location, value); + spin_unlock_irqrestore(&bus->mii_lock, flags); +} + +/*****************************************************************************/ + +/* list of all registered mii buses */ +static LIST_HEAD(fs_mii_bus_list); + +static struct fs_enet_mii_bus *lookup_bus(int method, int id) +{ + struct list_head *ptr; + struct fs_enet_mii_bus *bus; + + list_for_each(ptr, &fs_mii_bus_list) { + bus = list_entry(ptr, struct fs_enet_mii_bus, list); + if (bus->bus_info->method == method && + bus->bus_info->id == id) + return bus; + } + return NULL; +} + +static struct fs_enet_mii_bus *create_bus(const struct fs_mii_bus_info *bi) +{ + struct fs_enet_mii_bus *bus; + int ret = 0; + + bus = kmalloc(sizeof(*bus), GFP_KERNEL); + if (bus == NULL) { + ret = -ENOMEM; + goto err; + } + memset(bus, 0, sizeof(*bus)); + spin_lock_init(&bus->mii_lock); + bus->bus_info = bi; + bus->refs = 0; + bus->usage_map = 0; + + /* perform initialization */ + switch (bi->method) { + + case fsmii_fixed: + ret = fs_mii_fixed_init(bus); + if (ret != 0) + goto err; + break; + + case fsmii_bitbang: + ret = fs_mii_bitbang_init(bus); + if (ret != 0) + goto err; + break; +#ifdef CONFIG_FS_ENET_HAS_FEC + case fsmii_fec: + ret = fs_mii_fec_init(bus); + if (ret != 0) + goto err; + break; +#endif + default: + ret = -EINVAL; + goto err; + } + + list_add(&bus->list, &fs_mii_bus_list); + + return bus; + +err: + if (bus) + kfree(bus); + return ERR_PTR(ret); +} + +static void destroy_bus(struct fs_enet_mii_bus *bus) +{ + /* remove from bus list */ + list_del(&bus->list); + + /* nothing more needed */ + kfree(bus); +} + +int fs_mii_connect(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + struct fs_enet_mii_bus *bus = NULL; + + /* check method validity */ + switch (fpi->bus_info->method) { + case fsmii_fixed: + case fsmii_bitbang: + break; +#ifdef CONFIG_FS_ENET_HAS_FEC + case fsmii_fec: + break; +#endif + default: + printk(KERN_ERR DRV_MODULE_NAME + ": %s Unknown MII bus method (%d)!\n", + dev->name, fpi->bus_info->method); + return -EINVAL; + } + + bus = lookup_bus(fpi->bus_info->method, fpi->bus_info->id); + + /* if not found create new bus */ + if (bus == NULL) { + bus = create_bus(fpi->bus_info); + if (IS_ERR(bus)) { + printk(KERN_ERR DRV_MODULE_NAME + ": %s MII bus creation failure!\n", dev->name); + return PTR_ERR(bus); + } + } + + bus->refs++; + + fep->mii_bus = bus; + + fep->mii_if.dev = dev; + fep->mii_if.phy_id_mask = 0x1f; + fep->mii_if.reg_num_mask = 0x1f; + fep->mii_if.mdio_read = fs_mii_read; + fep->mii_if.mdio_write = fs_mii_write; + fep->mii_if.force_media = fpi->bus_info->disable_aneg; + fep->mii_if.phy_id = phy_id_detect(dev); + + return 0; +} + +void fs_mii_disconnect(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + struct fs_enet_mii_bus *bus = NULL; + + bus = fep->mii_bus; + fep->mii_bus = NULL; + + if (--bus->refs <= 0) + destroy_bus(bus); +} diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h new file mode 100644 index 000000000000..1105543b9d88 --- /dev/null +++ b/drivers/net/fs_enet/fs_enet.h @@ -0,0 +1,245 @@ +#ifndef FS_ENET_H +#define FS_ENET_H + +#include +#include +#include +#include +#include + +#include + +#include + +#ifdef CONFIG_CPM1 +#include +#endif + +#ifdef CONFIG_CPM2 +#include +#endif + +/* hw driver ops */ +struct fs_ops { + int (*setup_data)(struct net_device *dev); + int (*allocate_bd)(struct net_device *dev); + void (*free_bd)(struct net_device *dev); + void (*cleanup_data)(struct net_device *dev); + void (*set_multicast_list)(struct net_device *dev); + void (*restart)(struct net_device *dev); + void (*stop)(struct net_device *dev); + void (*pre_request_irq)(struct net_device *dev, int irq); + void (*post_free_irq)(struct net_device *dev, int irq); + void (*napi_clear_rx_event)(struct net_device *dev); + void (*napi_enable_rx)(struct net_device *dev); + void (*napi_disable_rx)(struct net_device *dev); + void (*rx_bd_done)(struct net_device *dev); + void (*tx_kickstart)(struct net_device *dev); + u32 (*get_int_events)(struct net_device *dev); + void (*clear_int_events)(struct net_device *dev, u32 int_events); + void (*ev_error)(struct net_device *dev, u32 int_events); + int (*get_regs)(struct net_device *dev, void *p, int *sizep); + int (*get_regs_len)(struct net_device *dev); + void (*tx_restart)(struct net_device *dev); +}; + +struct phy_info { + unsigned int id; + const char *name; + void (*startup) (struct net_device * dev); + void (*shutdown) (struct net_device * dev); + void (*ack_int) (struct net_device * dev); +}; + +/* The FEC stores dest/src/type, data, and checksum for receive packets. + */ +#define MAX_MTU 1508 /* Allow fullsized pppoe packets over VLAN */ +#define MIN_MTU 46 /* this is data size */ +#define CRC_LEN 4 + +#define PKT_MAXBUF_SIZE (MAX_MTU+ETH_HLEN+CRC_LEN) +#define PKT_MINBUF_SIZE (MIN_MTU+ETH_HLEN+CRC_LEN) + +/* Must be a multiple of 32 (to cover both FEC & FCC) */ +#define PKT_MAXBLR_SIZE ((PKT_MAXBUF_SIZE + 31) & ~31) +/* This is needed so that invalidate_xxx wont invalidate too much */ +#define ENET_RX_FRSIZE L1_CACHE_ALIGN(PKT_MAXBUF_SIZE) + +struct fs_enet_mii_bus { + struct list_head list; + spinlock_t mii_lock; + const struct fs_mii_bus_info *bus_info; + int refs; + u32 usage_map; + + int (*mii_read)(struct fs_enet_mii_bus *bus, + int phy_id, int location); + + void (*mii_write)(struct fs_enet_mii_bus *bus, + int phy_id, int location, int value); + + union { + struct { + unsigned int mii_speed; + void *fecp; + } fec; + + struct { + /* note that the actual port size may */ + /* be different; cpm(s) handle it OK */ + u8 mdio_msk; + u8 *mdio_dir; + u8 *mdio_dat; + u8 mdc_msk; + u8 *mdc_dir; + u8 *mdc_dat; + } bitbang; + + struct { + u16 lpa; + } fixed; + }; +}; + +int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus); +int fs_mii_fixed_init(struct fs_enet_mii_bus *bus); +int fs_mii_fec_init(struct fs_enet_mii_bus *bus); + +struct fs_enet_private { + struct device *dev; /* pointer back to the device (must be initialized first) */ + spinlock_t lock; /* during all ops except TX pckt processing */ + spinlock_t tx_lock; /* during fs_start_xmit and fs_tx */ + const struct fs_platform_info *fpi; + const struct fs_ops *ops; + int rx_ring, tx_ring; + dma_addr_t ring_mem_addr; + void *ring_base; + struct sk_buff **rx_skbuff; + struct sk_buff **tx_skbuff; + cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ + cbd_t *tx_bd_base; + cbd_t *dirty_tx; /* ring entries to be free()ed. */ + cbd_t *cur_rx; + cbd_t *cur_tx; + int tx_free; + struct net_device_stats stats; + struct timer_list phy_timer_list; + const struct phy_info *phy; + u32 msg_enable; + struct mii_if_info mii_if; + unsigned int last_mii_status; + struct fs_enet_mii_bus *mii_bus; + int interrupt; + + int duplex, speed; /* current settings */ + + /* event masks */ + u32 ev_napi_rx; /* mask of NAPI rx events */ + u32 ev_rx; /* rx event mask */ + u32 ev_tx; /* tx event mask */ + u32 ev_err; /* error event mask */ + + u16 bd_rx_empty; /* mask of BD rx empty */ + u16 bd_rx_err; /* mask of BD rx errors */ + + union { + struct { + int idx; /* FEC1 = 0, FEC2 = 1 */ + void *fecp; /* hw registers */ + u32 hthi, htlo; /* state for multicast */ + } fec; + + struct { + int idx; /* FCC1-3 = 0-2 */ + void *fccp; /* hw registers */ + void *ep; /* parameter ram */ + void *fcccp; /* hw registers cont. */ + void *mem; /* FCC DPRAM */ + u32 gaddrh, gaddrl; /* group address */ + } fcc; + + struct { + int idx; /* FEC1 = 0, FEC2 = 1 */ + void *sccp; /* hw registers */ + void *ep; /* parameter ram */ + u32 hthi, htlo; /* state for multicast */ + } scc; + + }; +}; + +/***************************************************************************/ + +int fs_mii_read(struct net_device *dev, int phy_id, int location); +void fs_mii_write(struct net_device *dev, int phy_id, int location, int value); + +void fs_mii_startup(struct net_device *dev); +void fs_mii_shutdown(struct net_device *dev); +void fs_mii_ack_int(struct net_device *dev); + +void fs_mii_link_status_change_check(struct net_device *dev, int init_media); + +void fs_init_bds(struct net_device *dev); +void fs_cleanup_bds(struct net_device *dev); + +/***************************************************************************/ + +#define DRV_MODULE_NAME "fs_enet" +#define PFX DRV_MODULE_NAME ": " +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Aug 8, 2005" + +/***************************************************************************/ + +int fs_enet_platform_init(void); +void fs_enet_platform_cleanup(void); + +/***************************************************************************/ + +/* buffer descriptor access macros */ + +/* access macros */ +#if defined(CONFIG_CPM1) +/* for a a CPM1 __raw_xxx's are sufficient */ +#define __cbd_out32(addr, x) __raw_writel(x, addr) +#define __cbd_out16(addr, x) __raw_writew(x, addr) +#define __cbd_in32(addr) __raw_readl(addr) +#define __cbd_in16(addr) __raw_readw(addr) +#else +/* for others play it safe */ +#define __cbd_out32(addr, x) out_be32(addr, x) +#define __cbd_out16(addr, x) out_be16(addr, x) +#define __cbd_in32(addr) in_be32(addr) +#define __cbd_in16(addr) in_be16(addr) +#endif + +/* write */ +#define CBDW_SC(_cbd, _sc) __cbd_out16(&(_cbd)->cbd_sc, (_sc)) +#define CBDW_DATLEN(_cbd, _datlen) __cbd_out16(&(_cbd)->cbd_datlen, (_datlen)) +#define CBDW_BUFADDR(_cbd, _bufaddr) __cbd_out32(&(_cbd)->cbd_bufaddr, (_bufaddr)) + +/* read */ +#define CBDR_SC(_cbd) __cbd_in16(&(_cbd)->cbd_sc) +#define CBDR_DATLEN(_cbd) __cbd_in16(&(_cbd)->cbd_datlen) +#define CBDR_BUFADDR(_cbd) __cbd_in32(&(_cbd)->cbd_bufaddr) + +/* set bits */ +#define CBDS_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) | (_sc)) + +/* clear bits */ +#define CBDC_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) & ~(_sc)) + +/*******************************************************************/ + +extern const struct fs_ops fs_fec_ops; +extern const struct fs_ops fs_fcc_ops; +extern const struct fs_ops fs_scc_ops; + +/*******************************************************************/ + +/* handy pointer to the immap */ +extern void *fs_enet_immap; + +/*******************************************************************/ + +#endif diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c new file mode 100644 index 000000000000..a940b96433c7 --- /dev/null +++ b/drivers/net/fs_enet/mac-fcc.c @@ -0,0 +1,578 @@ +/* + * FCC driver for Motorola MPC82xx (PQ2). + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +/*************************************************/ + +/* FCC access macros */ + +#define __fcc_out32(addr, x) out_be32((unsigned *)addr, x) +#define __fcc_out16(addr, x) out_be16((unsigned short *)addr, x) +#define __fcc_out8(addr, x) out_8((unsigned char *)addr, x) +#define __fcc_in32(addr) in_be32((unsigned *)addr) +#define __fcc_in16(addr) in_be16((unsigned short *)addr) +#define __fcc_in8(addr) in_8((unsigned char *)addr) + +/* parameter space */ + +/* write, read, set bits, clear bits */ +#define W32(_p, _m, _v) __fcc_out32(&(_p)->_m, (_v)) +#define R32(_p, _m) __fcc_in32(&(_p)->_m) +#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v)) +#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v)) + +#define W16(_p, _m, _v) __fcc_out16(&(_p)->_m, (_v)) +#define R16(_p, _m) __fcc_in16(&(_p)->_m) +#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v)) +#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v)) + +#define W8(_p, _m, _v) __fcc_out8(&(_p)->_m, (_v)) +#define R8(_p, _m) __fcc_in8(&(_p)->_m) +#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v)) +#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v)) + +/*************************************************/ + +#define FCC_MAX_MULTICAST_ADDRS 64 + +#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) +#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) +#define mk_mii_end 0 + +#define MAX_CR_CMD_LOOPS 10000 + +static inline int fcc_cr_cmd(struct fs_enet_private *fep, u32 mcn, u32 op) +{ + const struct fs_platform_info *fpi = fep->fpi; + + cpm2_map_t *immap = fs_enet_immap; + cpm_cpm2_t *cpmp = &immap->im_cpm; + u32 v; + int i; + + /* Currently I don't know what feature call will look like. But + I guess there'd be something like do_cpm_cmd() which will require page & sblock */ + v = mk_cr_cmd(fpi->cp_page, fpi->cp_block, mcn, op); + W32(cpmp, cp_cpcr, v | CPM_CR_FLG); + for (i = 0; i < MAX_CR_CMD_LOOPS; i++) + if ((R32(cpmp, cp_cpcr) & CPM_CR_FLG) == 0) + break; + + if (i >= MAX_CR_CMD_LOOPS) { + printk(KERN_ERR "%s(): Not able to issue CPM command\n", + __FUNCTION__); + return 1; + } + + return 0; +} + +static int do_pd_setup(struct fs_enet_private *fep) +{ + struct platform_device *pdev = to_platform_device(fep->dev); + struct resource *r; + + /* Fill out IRQ field */ + fep->interrupt = platform_get_irq(pdev, 0); + + /* Attach the memory for the FCC Parameter RAM */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_pram"); + fep->fcc.ep = (void *)r->start; + + if (fep->fcc.ep == NULL) + return -EINVAL; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fcc_regs"); + fep->fcc.fccp = (void *)r->start; + + if (fep->fcc.fccp == NULL) + return -EINVAL; + + fep->fcc.fcccp = (void *)fep->fpi->fcc_regs_c; + + if (fep->fcc.fcccp == NULL) + return -EINVAL; + + return 0; +} + +#define FCC_NAPI_RX_EVENT_MSK (FCC_ENET_RXF | FCC_ENET_RXB) +#define FCC_RX_EVENT (FCC_ENET_RXF) +#define FCC_TX_EVENT (FCC_ENET_TXB) +#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE | FCC_ENET_BSY) + +static int setup_data(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->fcc.idx = fs_get_fcc_index(fpi->fs_no); + if ((unsigned int)fep->fcc.idx >= 3) /* max 3 FCCs */ + return -EINVAL; + + fep->fcc.mem = (void *)fpi->mem_offset; + + if (do_pd_setup(fep) != 0) + return -EINVAL; + + fep->ev_napi_rx = FCC_NAPI_RX_EVENT_MSK; + fep->ev_rx = FCC_RX_EVENT; + fep->ev_tx = FCC_TX_EVENT; + fep->ev_err = FCC_ERR_EVENT_MSK; + + return 0; +} + +static int allocate_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->ring_base = dma_alloc_coherent(fep->dev, + (fpi->tx_ring + fpi->rx_ring) * + sizeof(cbd_t), &fep->ring_mem_addr, + GFP_KERNEL); + if (fep->ring_base == NULL) + return -ENOMEM; + + return 0; +} + +static void free_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + if (fep->ring_base) + dma_free_coherent(fep->dev, + (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t), + fep->ring_base, fep->ring_mem_addr); +} + +static void cleanup_data(struct net_device *dev) +{ + /* nothing */ +} + +static void set_promiscuous_mode(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + S32(fccp, fcc_fpsmr, FCC_PSMR_PRO); +} + +static void set_multicast_start(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_enet_t *ep = fep->fcc.ep; + + W32(ep, fen_gaddrh, 0); + W32(ep, fen_gaddrl, 0); +} + +static void set_multicast_one(struct net_device *dev, const u8 *mac) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_enet_t *ep = fep->fcc.ep; + u16 taddrh, taddrm, taddrl; + + taddrh = ((u16)mac[5] << 8) | mac[4]; + taddrm = ((u16)mac[3] << 8) | mac[2]; + taddrl = ((u16)mac[1] << 8) | mac[0]; + + W16(ep, fen_taddrh, taddrh); + W16(ep, fen_taddrm, taddrm); + W16(ep, fen_taddrl, taddrl); + fcc_cr_cmd(fep, 0x0C, CPM_CR_SET_GADDR); +} + +static void set_multicast_finish(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + fcc_enet_t *ep = fep->fcc.ep; + + /* clear promiscuous always */ + C32(fccp, fcc_fpsmr, FCC_PSMR_PRO); + + /* if all multi or too many multicasts; just enable all */ + if ((dev->flags & IFF_ALLMULTI) != 0 || + dev->mc_count > FCC_MAX_MULTICAST_ADDRS) { + + W32(ep, fen_gaddrh, 0xffffffff); + W32(ep, fen_gaddrl, 0xffffffff); + } + + /* read back */ + fep->fcc.gaddrh = R32(ep, fen_gaddrh); + fep->fcc.gaddrl = R32(ep, fen_gaddrl); +} + +static void set_multicast_list(struct net_device *dev) +{ + struct dev_mc_list *pmc; + + if ((dev->flags & IFF_PROMISC) == 0) { + set_multicast_start(dev); + for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next) + set_multicast_one(dev, pmc->dmi_addr); + set_multicast_finish(dev); + } else + set_promiscuous_mode(dev); +} + +static void restart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + fcc_t *fccp = fep->fcc.fccp; + fcc_c_t *fcccp = fep->fcc.fcccp; + fcc_enet_t *ep = fep->fcc.ep; + dma_addr_t rx_bd_base_phys, tx_bd_base_phys; + u16 paddrh, paddrm, paddrl; + u16 mem_addr; + const unsigned char *mac; + int i; + + C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT); + + /* clear everything (slow & steady does it) */ + for (i = 0; i < sizeof(*ep); i++) + __fcc_out8((char *)ep + i, 0); + + /* get physical address */ + rx_bd_base_phys = fep->ring_mem_addr; + tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring; + + /* point to bds */ + W32(ep, fen_genfcc.fcc_rbase, rx_bd_base_phys); + W32(ep, fen_genfcc.fcc_tbase, tx_bd_base_phys); + + /* Set maximum bytes per receive buffer. + * It must be a multiple of 32. + */ + W16(ep, fen_genfcc.fcc_mrblr, PKT_MAXBLR_SIZE); + + W32(ep, fen_genfcc.fcc_rstate, (CPMFCR_GBL | CPMFCR_EB) << 24); + W32(ep, fen_genfcc.fcc_tstate, (CPMFCR_GBL | CPMFCR_EB) << 24); + + /* Allocate space in the reserved FCC area of DPRAM for the + * internal buffers. No one uses this space (yet), so we + * can do this. Later, we will add resource management for + * this area. + */ + + mem_addr = (u32) fep->fcc.mem; /* de-fixup dpram offset */ + + W16(ep, fen_genfcc.fcc_riptr, (mem_addr & 0xffff)); + W16(ep, fen_genfcc.fcc_tiptr, ((mem_addr + 32) & 0xffff)); + W16(ep, fen_padptr, mem_addr + 64); + + /* fill with special symbol... */ + memset(fep->fcc.mem + fpi->dpram_offset + 64, 0x88, 32); + + W32(ep, fen_genfcc.fcc_rbptr, 0); + W32(ep, fen_genfcc.fcc_tbptr, 0); + W32(ep, fen_genfcc.fcc_rcrc, 0); + W32(ep, fen_genfcc.fcc_tcrc, 0); + W16(ep, fen_genfcc.fcc_res1, 0); + W32(ep, fen_genfcc.fcc_res2, 0); + + /* no CAM */ + W32(ep, fen_camptr, 0); + + /* Set CRC preset and mask */ + W32(ep, fen_cmask, 0xdebb20e3); + W32(ep, fen_cpres, 0xffffffff); + + W32(ep, fen_crcec, 0); /* CRC Error counter */ + W32(ep, fen_alec, 0); /* alignment error counter */ + W32(ep, fen_disfc, 0); /* discard frame counter */ + W16(ep, fen_retlim, 15); /* Retry limit threshold */ + W16(ep, fen_pper, 0); /* Normal persistence */ + + /* set group address */ + W32(ep, fen_gaddrh, fep->fcc.gaddrh); + W32(ep, fen_gaddrl, fep->fcc.gaddrh); + + /* Clear hash filter tables */ + W32(ep, fen_iaddrh, 0); + W32(ep, fen_iaddrl, 0); + + /* Clear the Out-of-sequence TxBD */ + W16(ep, fen_tfcstat, 0); + W16(ep, fen_tfclen, 0); + W32(ep, fen_tfcptr, 0); + + W16(ep, fen_mflr, PKT_MAXBUF_SIZE); /* maximum frame length register */ + W16(ep, fen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */ + + /* set address */ + mac = dev->dev_addr; + paddrh = ((u16)mac[5] << 8) | mac[4]; + paddrm = ((u16)mac[3] << 8) | mac[2]; + paddrl = ((u16)mac[1] << 8) | mac[0]; + + W16(ep, fen_paddrh, paddrh); + W16(ep, fen_paddrm, paddrm); + W16(ep, fen_paddrl, paddrl); + + W16(ep, fen_taddrh, 0); + W16(ep, fen_taddrm, 0); + W16(ep, fen_taddrl, 0); + + W16(ep, fen_maxd1, 1520); /* maximum DMA1 length */ + W16(ep, fen_maxd2, 1520); /* maximum DMA2 length */ + + /* Clear stat counters, in case we ever enable RMON */ + W32(ep, fen_octc, 0); + W32(ep, fen_colc, 0); + W32(ep, fen_broc, 0); + W32(ep, fen_mulc, 0); + W32(ep, fen_uspc, 0); + W32(ep, fen_frgc, 0); + W32(ep, fen_ospc, 0); + W32(ep, fen_jbrc, 0); + W32(ep, fen_p64c, 0); + W32(ep, fen_p65c, 0); + W32(ep, fen_p128c, 0); + W32(ep, fen_p256c, 0); + W32(ep, fen_p512c, 0); + W32(ep, fen_p1024c, 0); + + W16(ep, fen_rfthr, 0); /* Suggested by manual */ + W16(ep, fen_rfcnt, 0); + W16(ep, fen_cftype, 0); + + fs_init_bds(dev); + + /* adjust to speed (for RMII mode) */ + if (fpi->use_rmii) { + if (fep->speed == 100) + C8(fcccp, fcc_gfemr, 0x20); + else + S8(fcccp, fcc_gfemr, 0x20); + } + + fcc_cr_cmd(fep, 0x0c, CPM_CR_INIT_TRX); + + /* clear events */ + W16(fccp, fcc_fcce, 0xffff); + + /* Enable interrupts we wish to service */ + W16(fccp, fcc_fccm, FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB); + + /* Set GFMR to enable Ethernet operating mode */ + W32(fccp, fcc_gfmr, FCC_GFMR_TCI | FCC_GFMR_MODE_ENET); + + /* set sync/delimiters */ + W16(fccp, fcc_fdsr, 0xd555); + + W32(fccp, fcc_fpsmr, FCC_PSMR_ENCRC); + + if (fpi->use_rmii) + S32(fccp, fcc_fpsmr, FCC_PSMR_RMII); + + /* adjust to duplex mode */ + if (fep->duplex) + S32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); + else + C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); + + S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT); +} + +static void stop(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + /* stop ethernet */ + C32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT); + + /* clear events */ + W16(fccp, fcc_fcce, 0xffff); + + /* clear interrupt mask */ + W16(fccp, fcc_fccm, 0); + + fs_cleanup_bds(dev); +} + +static void pre_request_irq(struct net_device *dev, int irq) +{ + /* nothing */ +} + +static void post_free_irq(struct net_device *dev, int irq) +{ + /* nothing */ +} + +static void napi_clear_rx_event(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + W16(fccp, fcc_fcce, FCC_NAPI_RX_EVENT_MSK); +} + +static void napi_enable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + S16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK); +} + +static void napi_disable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + C16(fccp, fcc_fccm, FCC_NAPI_RX_EVENT_MSK); +} + +static void rx_bd_done(struct net_device *dev) +{ + /* nothing */ +} + +static void tx_kickstart(struct net_device *dev) +{ + /* nothing */ +} + +static u32 get_int_events(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + return (u32)R16(fccp, fcc_fcce); +} + +static void clear_int_events(struct net_device *dev, u32 int_events) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + W16(fccp, fcc_fcce, int_events & 0xffff); +} + +static void ev_error(struct net_device *dev, u32 int_events) +{ + printk(KERN_WARNING DRV_MODULE_NAME + ": %s FS_ENET ERROR(s) 0x%x\n", dev->name, int_events); +} + +int get_regs(struct net_device *dev, void *p, int *sizep) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (*sizep < sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t)) + return -EINVAL; + + memcpy_fromio(p, fep->fcc.fccp, sizeof(fcc_t)); + p = (char *)p + sizeof(fcc_t); + + memcpy_fromio(p, fep->fcc.fcccp, sizeof(fcc_c_t)); + p = (char *)p + sizeof(fcc_c_t); + + memcpy_fromio(p, fep->fcc.ep, sizeof(fcc_enet_t)); + + return 0; +} + +int get_regs_len(struct net_device *dev) +{ + return sizeof(fcc_t) + sizeof(fcc_c_t) + sizeof(fcc_enet_t); +} + +/* Some transmit errors cause the transmitter to shut + * down. We now issue a restart transmit. Since the + * errors close the BD and update the pointers, the restart + * _should_ pick up without having to reset any of our + * pointers either. Also, To workaround 8260 device erratum + * CPM37, we must disable and then re-enable the transmitter + * following a Late Collision, Underrun, or Retry Limit error. + */ +void tx_restart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fcc_t *fccp = fep->fcc.fccp; + + C32(fccp, fcc_gfmr, FCC_GFMR_ENT); + udelay(10); + S32(fccp, fcc_gfmr, FCC_GFMR_ENT); + + fcc_cr_cmd(fep, 0x0C, CPM_CR_RESTART_TX); +} + +/*************************************************************************/ + +const struct fs_ops fs_fcc_ops = { + .setup_data = setup_data, + .cleanup_data = cleanup_data, + .set_multicast_list = set_multicast_list, + .restart = restart, + .stop = stop, + .pre_request_irq = pre_request_irq, + .post_free_irq = post_free_irq, + .napi_clear_rx_event = napi_clear_rx_event, + .napi_enable_rx = napi_enable_rx, + .napi_disable_rx = napi_disable_rx, + .rx_bd_done = rx_bd_done, + .tx_kickstart = tx_kickstart, + .get_int_events = get_int_events, + .clear_int_events = clear_int_events, + .ev_error = ev_error, + .get_regs = get_regs, + .get_regs_len = get_regs_len, + .tx_restart = tx_restart, + .allocate_bd = allocate_bd, + .free_bd = free_bd, +}; diff --git a/drivers/net/fs_enet/mac-fec.c b/drivers/net/fs_enet/mac-fec.c new file mode 100644 index 000000000000..5ef4e845a387 --- /dev/null +++ b/drivers/net/fs_enet/mac-fec.c @@ -0,0 +1,653 @@ +/* + * Freescale Ethernet controllers + * + * Copyright (c) 2005 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#ifdef CONFIG_8xx +#include +#include +#include +#include +#endif + +#include "fs_enet.h" + +/*************************************************/ + +#if defined(CONFIG_CPM1) +/* for a CPM1 __raw_xxx's are sufficient */ +#define __fs_out32(addr, x) __raw_writel(x, addr) +#define __fs_out16(addr, x) __raw_writew(x, addr) +#define __fs_in32(addr) __raw_readl(addr) +#define __fs_in16(addr) __raw_readw(addr) +#else +/* for others play it safe */ +#define __fs_out32(addr, x) out_be32(addr, x) +#define __fs_out16(addr, x) out_be16(addr, x) +#define __fs_in32(addr) in_be32(addr) +#define __fs_in16(addr) in_be16(addr) +#endif + +/* write */ +#define FW(_fecp, _reg, _v) __fs_out32(&(_fecp)->fec_ ## _reg, (_v)) + +/* read */ +#define FR(_fecp, _reg) __fs_in32(&(_fecp)->fec_ ## _reg) + +/* set bits */ +#define FS(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) | (_v)) + +/* clear bits */ +#define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v)) + + +/* CRC polynomium used by the FEC for the multicast group filtering */ +#define FEC_CRC_POLY 0x04C11DB7 + +#define FEC_MAX_MULTICAST_ADDRS 64 + +/* Interrupt events/masks. +*/ +#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */ +#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */ +#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */ +#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */ +#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */ +#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */ +#define FEC_ENET_RXF 0x02000000U /* Full frame received */ +#define FEC_ENET_RXB 0x01000000U /* A buffer was received */ +#define FEC_ENET_MII 0x00800000U /* MII interrupt */ +#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */ + +#define FEC_ECNTRL_PINMUX 0x00000004 +#define FEC_ECNTRL_ETHER_EN 0x00000002 +#define FEC_ECNTRL_RESET 0x00000001 + +#define FEC_RCNTRL_BC_REJ 0x00000010 +#define FEC_RCNTRL_PROM 0x00000008 +#define FEC_RCNTRL_MII_MODE 0x00000004 +#define FEC_RCNTRL_DRT 0x00000002 +#define FEC_RCNTRL_LOOP 0x00000001 + +#define FEC_TCNTRL_FDEN 0x00000004 +#define FEC_TCNTRL_HBC 0x00000002 +#define FEC_TCNTRL_GTS 0x00000001 + + +/* Make MII read/write commands for the FEC. +*/ +#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) +#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) +#define mk_mii_end 0 + +#define FEC_MII_LOOPS 10000 + +/* + * Delay to wait for FEC reset command to complete (in us) + */ +#define FEC_RESET_DELAY 50 + +static int whack_reset(fec_t * fecp) +{ + int i; + + FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET); + for (i = 0; i < FEC_RESET_DELAY; i++) { + if ((FR(fecp, ecntrl) & FEC_ECNTRL_RESET) == 0) + return 0; /* OK */ + udelay(1); + } + + return -1; +} + +static int do_pd_setup(struct fs_enet_private *fep) +{ + struct platform_device *pdev = to_platform_device(fep->dev); + struct resource *r; + + /* Fill out IRQ field */ + fep->interrupt = platform_get_irq_byname(pdev,"interrupt"); + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + fep->fec.fecp =(void*)r->start; + + if(fep->fec.fecp == NULL) + return -EINVAL; + + return 0; + +} + +#define FEC_NAPI_RX_EVENT_MSK (FEC_ENET_RXF | FEC_ENET_RXB) +#define FEC_RX_EVENT (FEC_ENET_RXF) +#define FEC_TX_EVENT (FEC_ENET_TXF) +#define FEC_ERR_EVENT_MSK (FEC_ENET_HBERR | FEC_ENET_BABR | \ + FEC_ENET_BABT | FEC_ENET_EBERR) + +static int setup_data(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (do_pd_setup(fep) != 0) + return -EINVAL; + + fep->fec.hthi = 0; + fep->fec.htlo = 0; + + fep->ev_napi_rx = FEC_NAPI_RX_EVENT_MSK; + fep->ev_rx = FEC_RX_EVENT; + fep->ev_tx = FEC_TX_EVENT; + fep->ev_err = FEC_ERR_EVENT_MSK; + + return 0; +} + +static int allocate_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->ring_base = dma_alloc_coherent(fep->dev, + (fpi->tx_ring + fpi->rx_ring) * + sizeof(cbd_t), &fep->ring_mem_addr, + GFP_KERNEL); + if (fep->ring_base == NULL) + return -ENOMEM; + + return 0; +} + +static void free_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + if(fep->ring_base) + dma_free_coherent(fep->dev, (fpi->tx_ring + fpi->rx_ring) + * sizeof(cbd_t), + fep->ring_base, + fep->ring_mem_addr); +} + +static void cleanup_data(struct net_device *dev) +{ + /* nothing */ +} + +static void set_promiscuous_mode(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FS(fecp, r_cntrl, FEC_RCNTRL_PROM); +} + +static void set_multicast_start(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + fep->fec.hthi = 0; + fep->fec.htlo = 0; +} + +static void set_multicast_one(struct net_device *dev, const u8 *mac) +{ + struct fs_enet_private *fep = netdev_priv(dev); + int temp, hash_index, i, j; + u32 crc, csrVal; + u8 byte, msb; + + crc = 0xffffffff; + for (i = 0; i < 6; i++) { + byte = mac[i]; + for (j = 0; j < 8; j++) { + msb = crc >> 31; + crc <<= 1; + if (msb ^ (byte & 0x1)) + crc ^= FEC_CRC_POLY; + byte >>= 1; + } + } + + temp = (crc & 0x3f) >> 1; + hash_index = ((temp & 0x01) << 4) | + ((temp & 0x02) << 2) | + ((temp & 0x04)) | + ((temp & 0x08) >> 2) | + ((temp & 0x10) >> 4); + csrVal = 1 << hash_index; + if (crc & 1) + fep->fec.hthi |= csrVal; + else + fep->fec.htlo |= csrVal; +} + +static void set_multicast_finish(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + /* if all multi or too many multicasts; just enable all */ + if ((dev->flags & IFF_ALLMULTI) != 0 || + dev->mc_count > FEC_MAX_MULTICAST_ADDRS) { + fep->fec.hthi = 0xffffffffU; + fep->fec.htlo = 0xffffffffU; + } + + FC(fecp, r_cntrl, FEC_RCNTRL_PROM); + FW(fecp, hash_table_high, fep->fec.hthi); + FW(fecp, hash_table_low, fep->fec.htlo); +} + +static void set_multicast_list(struct net_device *dev) +{ + struct dev_mc_list *pmc; + + if ((dev->flags & IFF_PROMISC) == 0) { + set_multicast_start(dev); + for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next) + set_multicast_one(dev, pmc->dmi_addr); + set_multicast_finish(dev); + } else + set_promiscuous_mode(dev); +} + +static void restart(struct net_device *dev) +{ +#ifdef CONFIG_DUET + immap_t *immap = fs_enet_immap; + u32 cptr; +#endif + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + const struct fs_platform_info *fpi = fep->fpi; + dma_addr_t rx_bd_base_phys, tx_bd_base_phys; + int r; + u32 addrhi, addrlo; + + r = whack_reset(fep->fec.fecp); + if (r != 0) + printk(KERN_ERR DRV_MODULE_NAME + ": %s FEC Reset FAILED!\n", dev->name); + + /* + * Set station address. + */ + addrhi = ((u32) dev->dev_addr[0] << 24) | + ((u32) dev->dev_addr[1] << 16) | + ((u32) dev->dev_addr[2] << 8) | + (u32) dev->dev_addr[3]; + addrlo = ((u32) dev->dev_addr[4] << 24) | + ((u32) dev->dev_addr[5] << 16); + FW(fecp, addr_low, addrhi); + FW(fecp, addr_high, addrlo); + + /* + * Reset all multicast. + */ + FW(fecp, hash_table_high, fep->fec.hthi); + FW(fecp, hash_table_low, fep->fec.htlo); + + /* + * Set maximum receive buffer size. + */ + FW(fecp, r_buff_size, PKT_MAXBLR_SIZE); + FW(fecp, r_hash, PKT_MAXBUF_SIZE); + + /* get physical address */ + rx_bd_base_phys = fep->ring_mem_addr; + tx_bd_base_phys = rx_bd_base_phys + sizeof(cbd_t) * fpi->rx_ring; + + /* + * Set receive and transmit descriptor base. + */ + FW(fecp, r_des_start, rx_bd_base_phys); + FW(fecp, x_des_start, tx_bd_base_phys); + + fs_init_bds(dev); + + /* + * Enable big endian and don't care about SDMA FC. + */ + FW(fecp, fun_code, 0x78000000); + + /* + * Set MII speed. + */ + FW(fecp, mii_speed, fep->mii_bus->fec.mii_speed); + + /* + * Clear any outstanding interrupt. + */ + FW(fecp, ievent, 0xffc0); + FW(fecp, ivec, (fep->interrupt / 2) << 29); + + + /* + * adjust to speed (only for DUET & RMII) + */ +#ifdef CONFIG_DUET + if (fpi->use_rmii) { + cptr = in_be32(&immap->im_cpm.cp_cptr); + switch (fs_get_fec_index(fpi->fs_no)) { + case 0: + cptr |= 0x100; + if (fep->speed == 10) + cptr |= 0x0000010; + else if (fep->speed == 100) + cptr &= ~0x0000010; + break; + case 1: + cptr |= 0x80; + if (fep->speed == 10) + cptr |= 0x0000008; + else if (fep->speed == 100) + cptr &= ~0x0000008; + break; + default: + BUG(); /* should never happen */ + break; + } + out_be32(&immap->im_cpm.cp_cptr, cptr); + } +#endif + + FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ + /* + * adjust to duplex mode + */ + if (fep->duplex) { + FC(fecp, r_cntrl, FEC_RCNTRL_DRT); + FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */ + } else { + FS(fecp, r_cntrl, FEC_RCNTRL_DRT); + FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */ + } + + /* + * Enable interrupts we wish to service. + */ + FW(fecp, imask, FEC_ENET_TXF | FEC_ENET_TXB | + FEC_ENET_RXF | FEC_ENET_RXB); + + /* + * And last, enable the transmit and receive processing. + */ + FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); + FW(fecp, r_des_active, 0x01000000); +} + +static void stop(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + struct fs_enet_mii_bus *bus = fep->mii_bus; + const struct fs_mii_bus_info *bi = bus->bus_info; + int i; + + if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0) + return; /* already down */ + + FW(fecp, x_cntrl, 0x01); /* Graceful transmit stop */ + for (i = 0; ((FR(fecp, ievent) & 0x10000000) == 0) && + i < FEC_RESET_DELAY; i++) + udelay(1); + + if (i == FEC_RESET_DELAY) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s FEC timeout on graceful transmit stop\n", + dev->name); + /* + * Disable FEC. Let only MII interrupts. + */ + FW(fecp, imask, 0); + FC(fecp, ecntrl, FEC_ECNTRL_ETHER_EN); + + fs_cleanup_bds(dev); + + /* shut down FEC1? that's where the mii bus is */ + if (fep->fec.idx == 0 && bus->refs > 1 && bi->method == fsmii_fec) { + FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ + FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); + FW(fecp, ievent, FEC_ENET_MII); + FW(fecp, mii_speed, bus->fec.mii_speed); + } +} + +static void pre_request_irq(struct net_device *dev, int irq) +{ + immap_t *immap = fs_enet_immap; + u32 siel; + + /* SIU interrupt */ + if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) { + + siel = in_be32(&immap->im_siu_conf.sc_siel); + if ((irq & 1) == 0) + siel |= (0x80000000 >> irq); + else + siel &= ~(0x80000000 >> (irq & ~1)); + out_be32(&immap->im_siu_conf.sc_siel, siel); + } +} + +static void post_free_irq(struct net_device *dev, int irq) +{ + /* nothing */ +} + +static void napi_clear_rx_event(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FW(fecp, ievent, FEC_NAPI_RX_EVENT_MSK); +} + +static void napi_enable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FS(fecp, imask, FEC_NAPI_RX_EVENT_MSK); +} + +static void napi_disable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FC(fecp, imask, FEC_NAPI_RX_EVENT_MSK); +} + +static void rx_bd_done(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FW(fecp, r_des_active, 0x01000000); +} + +static void tx_kickstart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FW(fecp, x_des_active, 0x01000000); +} + +static u32 get_int_events(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + return FR(fecp, ievent) & FR(fecp, imask); +} + +static void clear_int_events(struct net_device *dev, u32 int_events) +{ + struct fs_enet_private *fep = netdev_priv(dev); + fec_t *fecp = fep->fec.fecp; + + FW(fecp, ievent, int_events); +} + +static void ev_error(struct net_device *dev, u32 int_events) +{ + printk(KERN_WARNING DRV_MODULE_NAME + ": %s FEC ERROR(s) 0x%x\n", dev->name, int_events); +} + +int get_regs(struct net_device *dev, void *p, int *sizep) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (*sizep < sizeof(fec_t)) + return -EINVAL; + + memcpy_fromio(p, fep->fec.fecp, sizeof(fec_t)); + + return 0; +} + +int get_regs_len(struct net_device *dev) +{ + return sizeof(fec_t); +} + +void tx_restart(struct net_device *dev) +{ + /* nothing */ +} + +/*************************************************************************/ + +const struct fs_ops fs_fec_ops = { + .setup_data = setup_data, + .cleanup_data = cleanup_data, + .set_multicast_list = set_multicast_list, + .restart = restart, + .stop = stop, + .pre_request_irq = pre_request_irq, + .post_free_irq = post_free_irq, + .napi_clear_rx_event = napi_clear_rx_event, + .napi_enable_rx = napi_enable_rx, + .napi_disable_rx = napi_disable_rx, + .rx_bd_done = rx_bd_done, + .tx_kickstart = tx_kickstart, + .get_int_events = get_int_events, + .clear_int_events = clear_int_events, + .ev_error = ev_error, + .get_regs = get_regs, + .get_regs_len = get_regs_len, + .tx_restart = tx_restart, + .allocate_bd = allocate_bd, + .free_bd = free_bd, +}; + +/***********************************************************************/ + +static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) +{ + fec_t *fecp = bus->fec.fecp; + int i, ret = -1; + + if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) + BUG(); + + /* Add PHY address to register command. */ + FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location)); + + for (i = 0; i < FEC_MII_LOOPS; i++) + if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) + break; + + if (i < FEC_MII_LOOPS) { + FW(fecp, ievent, FEC_ENET_MII); + ret = FR(fecp, mii_data) & 0xffff; + } + + return ret; +} + +static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int value) +{ + fec_t *fecp = bus->fec.fecp; + int i; + + /* this must never happen */ + if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) + BUG(); + + /* Add PHY address to register command. */ + FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value)); + + for (i = 0; i < FEC_MII_LOOPS; i++) + if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) + break; + + if (i < FEC_MII_LOOPS) + FW(fecp, ievent, FEC_ENET_MII); +} + +int fs_mii_fec_init(struct fs_enet_mii_bus *bus) +{ + bd_t *bd = (bd_t *)__res; + const struct fs_mii_bus_info *bi = bus->bus_info; + fec_t *fecp; + + if (bi->id != 0) + return -1; + + bus->fec.fecp = &((immap_t *)fs_enet_immap)->im_cpm.cp_fec; + bus->fec.mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) + & 0x3F) << 1; + + fecp = bus->fec.fecp; + + FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ + FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); + FW(fecp, ievent, FEC_ENET_MII); + FW(fecp, mii_speed, bus->fec.mii_speed); + + bus->mii_read = mii_read; + bus->mii_write = mii_write; + + return 0; +} diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c new file mode 100644 index 000000000000..d8c6e9cadcf5 --- /dev/null +++ b/drivers/net/fs_enet/mac-scc.c @@ -0,0 +1,524 @@ +/* + * Ethernet on Serial Communications Controller (SCC) driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#ifdef CONFIG_8xx +#include +#include +#include +#include +#endif + +#include "fs_enet.h" + +/*************************************************/ + +#if defined(CONFIG_CPM1) +/* for a 8xx __raw_xxx's are sufficient */ +#define __fs_out32(addr, x) __raw_writel(x, addr) +#define __fs_out16(addr, x) __raw_writew(x, addr) +#define __fs_out8(addr, x) __raw_writeb(x, addr) +#define __fs_in32(addr) __raw_readl(addr) +#define __fs_in16(addr) __raw_readw(addr) +#define __fs_in8(addr) __raw_readb(addr) +#else +/* for others play it safe */ +#define __fs_out32(addr, x) out_be32(addr, x) +#define __fs_out16(addr, x) out_be16(addr, x) +#define __fs_in32(addr) in_be32(addr) +#define __fs_in16(addr) in_be16(addr) +#endif + +/* write, read, set bits, clear bits */ +#define W32(_p, _m, _v) __fs_out32(&(_p)->_m, (_v)) +#define R32(_p, _m) __fs_in32(&(_p)->_m) +#define S32(_p, _m, _v) W32(_p, _m, R32(_p, _m) | (_v)) +#define C32(_p, _m, _v) W32(_p, _m, R32(_p, _m) & ~(_v)) + +#define W16(_p, _m, _v) __fs_out16(&(_p)->_m, (_v)) +#define R16(_p, _m) __fs_in16(&(_p)->_m) +#define S16(_p, _m, _v) W16(_p, _m, R16(_p, _m) | (_v)) +#define C16(_p, _m, _v) W16(_p, _m, R16(_p, _m) & ~(_v)) + +#define W8(_p, _m, _v) __fs_out8(&(_p)->_m, (_v)) +#define R8(_p, _m) __fs_in8(&(_p)->_m) +#define S8(_p, _m, _v) W8(_p, _m, R8(_p, _m) | (_v)) +#define C8(_p, _m, _v) W8(_p, _m, R8(_p, _m) & ~(_v)) + +#define SCC_MAX_MULTICAST_ADDRS 64 + +/* + * Delay to wait for SCC reset command to complete (in us) + */ +#define SCC_RESET_DELAY 50 +#define MAX_CR_CMD_LOOPS 10000 + +static inline int scc_cr_cmd(struct fs_enet_private *fep, u32 op) +{ + cpm8xx_t *cpmp = &((immap_t *)fs_enet_immap)->im_cpm; + u32 v, ch; + int i = 0; + + ch = fep->scc.idx << 2; + v = mk_cr_cmd(ch, op); + W16(cpmp, cp_cpcr, v | CPM_CR_FLG); + for (i = 0; i < MAX_CR_CMD_LOOPS; i++) + if ((R16(cpmp, cp_cpcr) & CPM_CR_FLG) == 0) + break; + + if (i >= MAX_CR_CMD_LOOPS) { + printk(KERN_ERR "%s(): Not able to issue CPM command\n", + __FUNCTION__); + return 1; + } + return 0; +} + +static int do_pd_setup(struct fs_enet_private *fep) +{ + struct platform_device *pdev = to_platform_device(fep->dev); + struct resource *r; + + /* Fill out IRQ field */ + fep->interrupt = platform_get_irq_byname(pdev, "interrupt"); + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + fep->scc.sccp = (void *)r->start; + + if (fep->scc.sccp == NULL) + return -EINVAL; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram"); + fep->scc.ep = (void *)r->start; + + if (fep->scc.ep == NULL) + return -EINVAL; + + return 0; +} + +#define SCC_NAPI_RX_EVENT_MSK (SCCE_ENET_RXF | SCCE_ENET_RXB) +#define SCC_RX_EVENT (SCCE_ENET_RXF) +#define SCC_TX_EVENT (SCCE_ENET_TXB) +#define SCC_ERR_EVENT_MSK (SCCE_ENET_TXE | SCCE_ENET_BSY) + +static int setup_data(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->scc.idx = fs_get_scc_index(fpi->fs_no); + if ((unsigned int)fep->fcc.idx > 4) /* max 4 SCCs */ + return -EINVAL; + + do_pd_setup(fep); + + fep->scc.hthi = 0; + fep->scc.htlo = 0; + + fep->ev_napi_rx = SCC_NAPI_RX_EVENT_MSK; + fep->ev_rx = SCC_RX_EVENT; + fep->ev_tx = SCC_TX_EVENT; + fep->ev_err = SCC_ERR_EVENT_MSK; + + return 0; +} + +static int allocate_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + const struct fs_platform_info *fpi = fep->fpi; + + fep->ring_mem_addr = cpm_dpalloc((fpi->tx_ring + fpi->rx_ring) * + sizeof(cbd_t), 8); + if (IS_DPERR(fep->ring_mem_addr)) + return -ENOMEM; + + fep->ring_base = cpm_dpram_addr(fep->ring_mem_addr); + + return 0; +} + +static void free_bd(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (fep->ring_base) + cpm_dpfree(fep->ring_mem_addr); +} + +static void cleanup_data(struct net_device *dev) +{ + /* nothing */ +} + +static void set_promiscuous_mode(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + S16(sccp, scc_psmr, SCC_PSMR_PRO); +} + +static void set_multicast_start(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_enet_t *ep = fep->scc.ep; + + W16(ep, sen_gaddr1, 0); + W16(ep, sen_gaddr2, 0); + W16(ep, sen_gaddr3, 0); + W16(ep, sen_gaddr4, 0); +} + +static void set_multicast_one(struct net_device *dev, const u8 * mac) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_enet_t *ep = fep->scc.ep; + u16 taddrh, taddrm, taddrl; + + taddrh = ((u16) mac[5] << 8) | mac[4]; + taddrm = ((u16) mac[3] << 8) | mac[2]; + taddrl = ((u16) mac[1] << 8) | mac[0]; + + W16(ep, sen_taddrh, taddrh); + W16(ep, sen_taddrm, taddrm); + W16(ep, sen_taddrl, taddrl); + scc_cr_cmd(fep, CPM_CR_SET_GADDR); +} + +static void set_multicast_finish(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + scc_enet_t *ep = fep->scc.ep; + + /* clear promiscuous always */ + C16(sccp, scc_psmr, SCC_PSMR_PRO); + + /* if all multi or too many multicasts; just enable all */ + if ((dev->flags & IFF_ALLMULTI) != 0 || + dev->mc_count > SCC_MAX_MULTICAST_ADDRS) { + + W16(ep, sen_gaddr1, 0xffff); + W16(ep, sen_gaddr2, 0xffff); + W16(ep, sen_gaddr3, 0xffff); + W16(ep, sen_gaddr4, 0xffff); + } +} + +static void set_multicast_list(struct net_device *dev) +{ + struct dev_mc_list *pmc; + + if ((dev->flags & IFF_PROMISC) == 0) { + set_multicast_start(dev); + for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next) + set_multicast_one(dev, pmc->dmi_addr); + set_multicast_finish(dev); + } else + set_promiscuous_mode(dev); +} + +/* + * This function is called to start or restart the FEC during a link + * change. This only happens when switching between half and full + * duplex. + */ +static void restart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + scc_enet_t *ep = fep->scc.ep; + const struct fs_platform_info *fpi = fep->fpi; + u16 paddrh, paddrm, paddrl; + const unsigned char *mac; + int i; + + C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + /* clear everything (slow & steady does it) */ + for (i = 0; i < sizeof(*ep); i++) + __fs_out8((char *)ep + i, 0); + + /* point to bds */ + W16(ep, sen_genscc.scc_rbase, fep->ring_mem_addr); + W16(ep, sen_genscc.scc_tbase, + fep->ring_mem_addr + sizeof(cbd_t) * fpi->rx_ring); + + /* Initialize function code registers for big-endian. + */ + W8(ep, sen_genscc.scc_rfcr, SCC_EB); + W8(ep, sen_genscc.scc_tfcr, SCC_EB); + + /* Set maximum bytes per receive buffer. + * This appears to be an Ethernet frame size, not the buffer + * fragment size. It must be a multiple of four. + */ + W16(ep, sen_genscc.scc_mrblr, 0x5f0); + + /* Set CRC preset and mask. + */ + W32(ep, sen_cpres, 0xffffffff); + W32(ep, sen_cmask, 0xdebb20e3); + + W32(ep, sen_crcec, 0); /* CRC Error counter */ + W32(ep, sen_alec, 0); /* alignment error counter */ + W32(ep, sen_disfc, 0); /* discard frame counter */ + + W16(ep, sen_pads, 0x8888); /* Tx short frame pad character */ + W16(ep, sen_retlim, 15); /* Retry limit threshold */ + + W16(ep, sen_maxflr, 0x5ee); /* maximum frame length register */ + + W16(ep, sen_minflr, PKT_MINBUF_SIZE); /* minimum frame length register */ + + W16(ep, sen_maxd1, 0x000005f0); /* maximum DMA1 length */ + W16(ep, sen_maxd2, 0x000005f0); /* maximum DMA2 length */ + + /* Clear hash tables. + */ + W16(ep, sen_gaddr1, 0); + W16(ep, sen_gaddr2, 0); + W16(ep, sen_gaddr3, 0); + W16(ep, sen_gaddr4, 0); + W16(ep, sen_iaddr1, 0); + W16(ep, sen_iaddr2, 0); + W16(ep, sen_iaddr3, 0); + W16(ep, sen_iaddr4, 0); + + /* set address + */ + mac = dev->dev_addr; + paddrh = ((u16) mac[5] << 8) | mac[4]; + paddrm = ((u16) mac[3] << 8) | mac[2]; + paddrl = ((u16) mac[1] << 8) | mac[0]; + + W16(ep, sen_paddrh, paddrh); + W16(ep, sen_paddrm, paddrm); + W16(ep, sen_paddrl, paddrl); + + W16(ep, sen_pper, 0); + W16(ep, sen_taddrl, 0); + W16(ep, sen_taddrm, 0); + W16(ep, sen_taddrh, 0); + + fs_init_bds(dev); + + scc_cr_cmd(fep, CPM_CR_INIT_TRX); + + W16(sccp, scc_scce, 0xffff); + + /* Enable interrupts we wish to service. + */ + W16(sccp, scc_sccm, SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB); + + /* Set GSMR_H to enable all normal operating modes. + * Set GSMR_L to enable Ethernet to MC68160. + */ + W32(sccp, scc_gsmrh, 0); + W32(sccp, scc_gsmrl, + SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | + SCC_GSMRL_MODE_ENET); + + /* Set sync/delimiters. + */ + W16(sccp, scc_dsr, 0xd555); + + /* Set processing mode. Use Ethernet CRC, catch broadcast, and + * start frame search 22 bit times after RENA. + */ + W16(sccp, scc_psmr, SCC_PSMR_ENCRC | SCC_PSMR_NIB22); + + /* Set full duplex mode if needed */ + if (fep->duplex) + S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE); + + S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +} + +static void stop(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + int i; + + for (i = 0; (R16(sccp, scc_sccm) == 0) && i < SCC_RESET_DELAY; i++) + udelay(1); + + if (i == SCC_RESET_DELAY) + printk(KERN_WARNING DRV_MODULE_NAME + ": %s SCC timeout on graceful transmit stop\n", + dev->name); + + W16(sccp, scc_sccm, 0); + C32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + fs_cleanup_bds(dev); +} + +static void pre_request_irq(struct net_device *dev, int irq) +{ + immap_t *immap = fs_enet_immap; + u32 siel; + + /* SIU interrupt */ + if (irq >= SIU_IRQ0 && irq < SIU_LEVEL7) { + + siel = in_be32(&immap->im_siu_conf.sc_siel); + if ((irq & 1) == 0) + siel |= (0x80000000 >> irq); + else + siel &= ~(0x80000000 >> (irq & ~1)); + out_be32(&immap->im_siu_conf.sc_siel, siel); + } +} + +static void post_free_irq(struct net_device *dev, int irq) +{ + /* nothing */ +} + +static void napi_clear_rx_event(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + W16(sccp, scc_scce, SCC_NAPI_RX_EVENT_MSK); +} + +static void napi_enable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + S16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK); +} + +static void napi_disable_rx(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + C16(sccp, scc_sccm, SCC_NAPI_RX_EVENT_MSK); +} + +static void rx_bd_done(struct net_device *dev) +{ + /* nothing */ +} + +static void tx_kickstart(struct net_device *dev) +{ + /* nothing */ +} + +static u32 get_int_events(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + return (u32) R16(sccp, scc_scce); +} + +static void clear_int_events(struct net_device *dev, u32 int_events) +{ + struct fs_enet_private *fep = netdev_priv(dev); + scc_t *sccp = fep->scc.sccp; + + W16(sccp, scc_scce, int_events & 0xffff); +} + +static void ev_error(struct net_device *dev, u32 int_events) +{ + printk(KERN_WARNING DRV_MODULE_NAME + ": %s SCC ERROR(s) 0x%x\n", dev->name, int_events); +} + +static int get_regs(struct net_device *dev, void *p, int *sizep) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + if (*sizep < sizeof(scc_t) + sizeof(scc_enet_t)) + return -EINVAL; + + memcpy_fromio(p, fep->scc.sccp, sizeof(scc_t)); + p = (char *)p + sizeof(scc_t); + + memcpy_fromio(p, fep->scc.ep, sizeof(scc_enet_t)); + + return 0; +} + +static int get_regs_len(struct net_device *dev) +{ + return sizeof(scc_t) + sizeof(scc_enet_t); +} + +static void tx_restart(struct net_device *dev) +{ + struct fs_enet_private *fep = netdev_priv(dev); + + scc_cr_cmd(fep, CPM_CR_RESTART_TX); +} + +/*************************************************************************/ + +const struct fs_ops fs_scc_ops = { + .setup_data = setup_data, + .cleanup_data = cleanup_data, + .set_multicast_list = set_multicast_list, + .restart = restart, + .stop = stop, + .pre_request_irq = pre_request_irq, + .post_free_irq = post_free_irq, + .napi_clear_rx_event = napi_clear_rx_event, + .napi_enable_rx = napi_enable_rx, + .napi_disable_rx = napi_disable_rx, + .rx_bd_done = rx_bd_done, + .tx_kickstart = tx_kickstart, + .get_int_events = get_int_events, + .clear_int_events = clear_int_events, + .ev_error = ev_error, + .get_regs = get_regs, + .get_regs_len = get_regs_len, + .tx_restart = tx_restart, + .allocate_bd = allocate_bd, + .free_bd = free_bd, +}; diff --git a/drivers/net/fs_enet/mii-bitbang.c b/drivers/net/fs_enet/mii-bitbang.c new file mode 100644 index 000000000000..24a5e2e23d18 --- /dev/null +++ b/drivers/net/fs_enet/mii-bitbang.c @@ -0,0 +1,405 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +#ifdef CONFIG_8xx +static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) +{ + immap_t *im = (immap_t *)fs_enet_immap; + void *dir, *dat, *ppar; + int adv; + u8 msk; + + switch (port) { + case fsiop_porta: + dir = &im->im_ioport.iop_padir; + dat = &im->im_ioport.iop_padat; + ppar = &im->im_ioport.iop_papar; + break; + + case fsiop_portb: + dir = &im->im_cpm.cp_pbdir; + dat = &im->im_cpm.cp_pbdat; + ppar = &im->im_cpm.cp_pbpar; + break; + + case fsiop_portc: + dir = &im->im_ioport.iop_pcdir; + dat = &im->im_ioport.iop_pcdat; + ppar = &im->im_ioport.iop_pcpar; + break; + + case fsiop_portd: + dir = &im->im_ioport.iop_pddir; + dat = &im->im_ioport.iop_pddat; + ppar = &im->im_ioport.iop_pdpar; + break; + + case fsiop_porte: + dir = &im->im_cpm.cp_pedir; + dat = &im->im_cpm.cp_pedat; + ppar = &im->im_cpm.cp_pepar; + break; + + default: + printk(KERN_ERR DRV_MODULE_NAME + "Illegal port value %d!\n", port); + return -EINVAL; + } + + adv = bit >> 3; + dir = (char *)dir + adv; + dat = (char *)dat + adv; + ppar = (char *)ppar + adv; + + msk = 1 << (7 - (bit & 7)); + if ((in_8(ppar) & msk) != 0) { + printk(KERN_ERR DRV_MODULE_NAME + "pin %d on port %d is not general purpose!\n", bit, port); + return -EINVAL; + } + + *dirp = dir; + *datp = dat; + *mskp = msk; + + return 0; +} +#endif + +#ifdef CONFIG_8260 +static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit) +{ + iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport; + void *dir, *dat, *ppar; + int adv; + u8 msk; + + switch (port) { + case fsiop_porta: + dir = &io->iop_pdira; + dat = &io->iop_pdata; + ppar = &io->iop_ppara; + break; + + case fsiop_portb: + dir = &io->iop_pdirb; + dat = &io->iop_pdatb; + ppar = &io->iop_pparb; + break; + + case fsiop_portc: + dir = &io->iop_pdirc; + dat = &io->iop_pdatc; + ppar = &io->iop_pparc; + break; + + case fsiop_portd: + dir = &io->iop_pdird; + dat = &io->iop_pdatd; + ppar = &io->iop_ppard; + break; + + default: + printk(KERN_ERR DRV_MODULE_NAME + "Illegal port value %d!\n", port); + return -EINVAL; + } + + adv = bit >> 3; + dir = (char *)dir + adv; + dat = (char *)dat + adv; + ppar = (char *)ppar + adv; + + msk = 1 << (7 - (bit & 7)); + if ((in_8(ppar) & msk) != 0) { + printk(KERN_ERR DRV_MODULE_NAME + "pin %d on port %d is not general purpose!\n", bit, port); + return -EINVAL; + } + + *dirp = dir; + *datp = dat; + *mskp = msk; + + return 0; +} +#endif + +static inline void bb_set(u8 *p, u8 m) +{ + out_8(p, in_8(p) | m); +} + +static inline void bb_clr(u8 *p, u8 m) +{ + out_8(p, in_8(p) & ~m); +} + +static inline int bb_read(u8 *p, u8 m) +{ + return (in_8(p) & m) != 0; +} + +static inline void mdio_active(struct fs_enet_mii_bus *bus) +{ + bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); +} + +static inline void mdio_tristate(struct fs_enet_mii_bus *bus) +{ + bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk); +} + +static inline int mdio_read(struct fs_enet_mii_bus *bus) +{ + return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); +} + +static inline void mdio(struct fs_enet_mii_bus *bus, int what) +{ + if (what) + bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); + else + bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk); +} + +static inline void mdc(struct fs_enet_mii_bus *bus, int what) +{ + if (what) + bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); + else + bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk); +} + +static inline void mii_delay(struct fs_enet_mii_bus *bus) +{ + udelay(bus->bus_info->i.bitbang.delay); +} + +/* Utility to send the preamble, address, and register (common to read and write). */ +static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg) +{ + int j; + + /* + * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure. + * The IEEE spec says this is a PHY optional requirement. The AMD + * 79C874 requires one after power up and one after a MII communications + * error. This means that we are doing more preambles than we need, + * but it is safer and will be much more robust. + */ + + mdio_active(bus); + mdio(bus, 1); + for (j = 0; j < 32; j++) { + mdc(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + } + + /* send the start bit (01) and the read opcode (10) or write (10) */ + mdc(bus, 0); + mdio(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mdio(bus, 1); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mdio(bus, read); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mdio(bus, !read); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + + /* send the PHY address */ + for (j = 0; j < 5; j++) { + mdc(bus, 0); + mdio(bus, (addr & 0x10) != 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + addr <<= 1; + } + + /* send the register address */ + for (j = 0; j < 5; j++) { + mdc(bus, 0); + mdio(bus, (reg & 0x10) != 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + reg <<= 1; + } +} + +static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) +{ + u16 rdreg; + int ret, j; + u8 addr = phy_id & 0xff; + u8 reg = location & 0xff; + + bitbang_pre(bus, 1, addr, reg); + + /* tri-state our MDIO I/O pin so we can read */ + mdc(bus, 0); + mdio_tristate(bus); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + + /* check the turnaround bit: the PHY should be driving it to zero */ + if (mdio_read(bus) != 0) { + /* PHY didn't drive TA low */ + for (j = 0; j < 32; j++) { + mdc(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + } + ret = -1; + goto out; + } + + mdc(bus, 0); + mii_delay(bus); + + /* read 16 bits of register data, MSB first */ + rdreg = 0; + for (j = 0; j < 16; j++) { + mdc(bus, 1); + mii_delay(bus); + rdreg <<= 1; + rdreg |= mdio_read(bus); + mdc(bus, 0); + mii_delay(bus); + } + + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + + ret = rdreg; +out: + return ret; +} + +static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) +{ + int j; + u8 addr = phy_id & 0xff; + u8 reg = location & 0xff; + u16 value = val & 0xffff; + + bitbang_pre(bus, 0, addr, reg); + + /* send the turnaround (10) */ + mdc(bus, 0); + mdio(bus, 1); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + mdc(bus, 0); + mdio(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + + /* write 16 bits of register data, MSB first */ + for (j = 0; j < 16; j++) { + mdc(bus, 0); + mdio(bus, (value & 0x8000) != 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); + value <<= 1; + } + + /* + * Tri-state the MDIO line. + */ + mdio_tristate(bus); + mdc(bus, 0); + mii_delay(bus); + mdc(bus, 1); + mii_delay(bus); +} + +int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus) +{ + const struct fs_mii_bus_info *bi = bus->bus_info; + int r; + + r = bitbang_prep_bit(&bus->bitbang.mdio_dir, + &bus->bitbang.mdio_dat, + &bus->bitbang.mdio_msk, + bi->i.bitbang.mdio_port, + bi->i.bitbang.mdio_bit); + if (r != 0) + return r; + + r = bitbang_prep_bit(&bus->bitbang.mdc_dir, + &bus->bitbang.mdc_dat, + &bus->bitbang.mdc_msk, + bi->i.bitbang.mdc_port, + bi->i.bitbang.mdc_bit); + if (r != 0) + return r; + + bus->mii_read = mii_read; + bus->mii_write = mii_write; + + return 0; +} diff --git a/drivers/net/fs_enet/mii-fixed.c b/drivers/net/fs_enet/mii-fixed.c new file mode 100644 index 000000000000..b3e192d612e5 --- /dev/null +++ b/drivers/net/fs_enet/mii-fixed.c @@ -0,0 +1,92 @@ +/* + * Combined Ethernet driver for Motorola MPC8xx and MPC82xx. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "fs_enet.h" + +static const u16 mii_regs[7] = { + 0x3100, + 0x786d, + 0x0fff, + 0x0fff, + 0x01e1, + 0x45e1, + 0x0003, +}; + +static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location) +{ + int ret = 0; + + if ((unsigned int)location >= ARRAY_SIZE(mii_regs)) + return -1; + + if (location != 5) + ret = mii_regs[location]; + else + ret = bus->fixed.lpa; + + return ret; +} + +static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val) +{ + /* do nothing */ +} + +int fs_mii_fixed_init(struct fs_enet_mii_bus *bus) +{ + const struct fs_mii_bus_info *bi = bus->bus_info; + + bus->fixed.lpa = 0x45e1; /* default 100Mb, full duplex */ + + /* if speed is fixed at 10Mb, remove 100Mb modes */ + if (bi->i.fixed.speed == 10) + bus->fixed.lpa &= ~LPA_100; + + /* if duplex is half, remove full duplex modes */ + if (bi->i.fixed.duplex == 0) + bus->fixed.lpa &= ~LPA_DUPLEX; + + bus->mii_read = mii_read; + bus->mii_write = mii_write; + + return 0; +} diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h new file mode 100644 index 000000000000..bef23bbf8690 --- /dev/null +++ b/include/linux/fs_enet_pd.h @@ -0,0 +1,136 @@ +/* + * Platform information definitions for the + * universal Freescale Ethernet driver. + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_ENET_PD_H +#define FS_ENET_PD_H + +#include +#include + +#define FS_ENET_NAME "fs_enet" + +enum fs_id { + fsid_fec1, + fsid_fec2, + fsid_fcc1, + fsid_fcc2, + fsid_fcc3, + fsid_scc1, + fsid_scc2, + fsid_scc3, + fsid_scc4, +}; + +#define FS_MAX_INDEX 9 + +static inline int fs_get_fec_index(enum fs_id id) +{ + if (id >= fsid_fec1 && id <= fsid_fec2) + return id - fsid_fec1; + return -1; +} + +static inline int fs_get_fcc_index(enum fs_id id) +{ + if (id >= fsid_fcc1 && id <= fsid_fcc3) + return id - fsid_fcc1; + return -1; +} + +static inline int fs_get_scc_index(enum fs_id id) +{ + if (id >= fsid_scc1 && id <= fsid_scc4) + return id - fsid_scc1; + return -1; +} + +enum fs_mii_method { + fsmii_fixed, + fsmii_fec, + fsmii_bitbang, +}; + +enum fs_ioport { + fsiop_porta, + fsiop_portb, + fsiop_portc, + fsiop_portd, + fsiop_porte, +}; + +struct fs_mii_bus_info { + int method; /* mii method */ + int id; /* the id of the mii_bus */ + int disable_aneg; /* if the controller needs to negothiate speed & duplex */ + int lpa; /* the default board-specific vallues will be applied otherwise */ + + union { + struct { + int duplex; + int speed; + } fixed; + + struct { + /* nothing */ + } fec; + + struct { + /* nothing */ + } scc; + + struct { + int mdio_port; /* port & bit for MDIO */ + int mdio_bit; + int mdc_port; /* port & bit for MDC */ + int mdc_bit; + int delay; /* delay in us */ + } bitbang; + } i; +}; + +struct fs_platform_info { + + void(*init_ioports)(void); + /* device specific information */ + int fs_no; /* controller index */ + + u32 cp_page; /* CPM page */ + u32 cp_block; /* CPM sblock */ + + u32 clk_trx; /* some stuff for pins & mux configuration*/ + u32 clk_route; + u32 clk_mask; + + u32 mem_offset; + u32 dpram_offset; + u32 fcc_regs_c; + + u32 device_flags; + + int phy_addr; /* the phy address (-1 no phy) */ + int phy_irq; /* the phy irq (if it exists) */ + + const struct fs_mii_bus_info *bus_info; + + int rx_ring, tx_ring; /* number of buffers on rx */ + __u8 macaddr[6]; /* mac address */ + int rx_copybreak; /* limit we copy small frames */ + int use_napi; /* use NAPI */ + int napi_weight; /* NAPI weight */ + + int use_rmii; /* use RMII mode */ +}; + +#endif -- GitLab From 19c1f3ca4272008a256cc153f3e3feb097799070 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 28 Oct 2005 21:37:29 +0100 Subject: [PATCH 0626/1519] [MMC] wbsd suspend support Proper handling of suspend/resume in the wbsd driver. Signed-off-by: Pierre Ossman Signed-off-by: Russell King --- drivers/mmc/wbsd.c | 119 ++++++++++++++++++++++++++++++++++----------- 1 file changed, 91 insertions(+), 28 deletions(-) diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 25f7ce7b3bc0..3ace875decc4 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1033,13 +1033,16 @@ static void wbsd_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) } else { - setup &= ~WBSD_DAT3_H; + if (setup & WBSD_DAT3_H) + { + setup &= ~WBSD_DAT3_H; - /* - * We cannot resume card detection immediatly - * because of capacitance and delays in the chip. - */ - mod_timer(&host->ignore_timer, jiffies + HZ/100); + /* + * We cannot resume card detection immediatly + * because of capacitance and delays in the chip. + */ + mod_timer(&host->ignore_timer, jiffies + HZ/100); + } } wbsd_write_index(host, WBSD_IDX_SETUP, setup); @@ -1461,8 +1464,10 @@ static int __devinit wbsd_scan(struct wbsd_host* host) { id = 0xFFFF; - outb(unlock_codes[j], config_ports[i]); - outb(unlock_codes[j], config_ports[i]); + host->config = config_ports[i]; + host->unlock_code = unlock_codes[j]; + + wbsd_unlock_config(host); outb(WBSD_CONF_ID_HI, config_ports[i]); id = inb(config_ports[i] + 1) << 8; @@ -1470,13 +1475,13 @@ static int __devinit wbsd_scan(struct wbsd_host* host) outb(WBSD_CONF_ID_LO, config_ports[i]); id |= inb(config_ports[i] + 1); + wbsd_lock_config(host); + for (k = 0;k < sizeof(valid_ids)/sizeof(int);k++) { if (id == valid_ids[k]) { host->chip_id = id; - host->config = config_ports[i]; - host->unlock_code = unlock_codes[i]; return 0; } @@ -1487,13 +1492,14 @@ static int __devinit wbsd_scan(struct wbsd_host* host) DBG("Unknown hardware (id %x) found at %x\n", id, config_ports[i]); } - - outb(LOCK_CODE, config_ports[i]); } release_region(config_ports[i], 2); } + host->config = 0; + host->unlock_code = 0; + return -ENODEV; } @@ -1699,8 +1705,10 @@ static void __devexit wbsd_release_resources(struct wbsd_host* host) * Configure the resources the chip should use. */ -static void __devinit wbsd_chip_config(struct wbsd_host* host) +static void wbsd_chip_config(struct wbsd_host* host) { + wbsd_unlock_config(host); + /* * Reset the chip. */ @@ -1733,16 +1741,20 @@ static void __devinit wbsd_chip_config(struct wbsd_host* host) */ wbsd_write_config(host, WBSD_CONF_ENABLE, 1); wbsd_write_config(host, WBSD_CONF_POWER, 0x20); + + wbsd_lock_config(host); } /* * Check that configured resources are correct. */ -static int __devinit wbsd_chip_validate(struct wbsd_host* host) +static int wbsd_chip_validate(struct wbsd_host* host) { int base, irq, dma; + wbsd_unlock_config(host); + /* * Select SD/MMC function. */ @@ -1758,6 +1770,8 @@ static int __devinit wbsd_chip_validate(struct wbsd_host* host) dma = wbsd_read_config(host, WBSD_CONF_DRQ); + wbsd_lock_config(host); + /* * Validate against given configuration. */ @@ -1771,6 +1785,20 @@ static int __devinit wbsd_chip_validate(struct wbsd_host* host) return 1; } +/* + * Powers down the SD function + */ + +static void wbsd_chip_poweroff(struct wbsd_host* host) +{ + wbsd_unlock_config(host); + + wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); + wbsd_write_config(host, WBSD_CONF_ENABLE, 0); + + wbsd_lock_config(host); +} + /*****************************************************************************\ * * * Devices setup and shutdown * @@ -1844,7 +1872,11 @@ static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma, */ #ifdef CONFIG_PM if (host->config) + { + wbsd_unlock_config(host); wbsd_write_config(host, WBSD_CONF_PME, 0xA0); + wbsd_lock_config(host); + } #endif /* * Allow device to initialise itself properly. @@ -1885,16 +1917,11 @@ static void __devexit wbsd_shutdown(struct device* dev, int pnp) mmc_remove_host(mmc); + /* + * Power down the SD/MMC function. + */ if (!pnp) - { - /* - * Power down the SD/MMC function. - */ - wbsd_unlock_config(host); - wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); - wbsd_write_config(host, WBSD_CONF_ENABLE, 0); - wbsd_lock_config(host); - } + wbsd_chip_poweroff(host); wbsd_release_resources(host); @@ -1955,23 +1982,59 @@ static void __devexit wbsd_pnp_remove(struct pnp_dev * dev) */ #ifdef CONFIG_PM + static int wbsd_suspend(struct device *dev, pm_message_t state) { - DBGF("Not yet supported\n"); + struct mmc_host *mmc = dev_get_drvdata(dev); + struct wbsd_host *host; + int ret; + + if (!mmc) + return 0; + + DBG("Suspending...\n"); + + ret = mmc_suspend_host(mmc, state); + if (!ret) + return ret; + + host = mmc_priv(mmc); + + wbsd_chip_poweroff(host); return 0; } static int wbsd_resume(struct device *dev) { - DBGF("Not yet supported\n"); + struct mmc_host *mmc = dev_get_drvdata(dev); + struct wbsd_host *host; - return 0; + if (!mmc) + return 0; + + DBG("Resuming...\n"); + + host = mmc_priv(mmc); + + wbsd_chip_config(host); + + /* + * Allow device to initialise itself properly. + */ + mdelay(5); + + wbsd_init_device(host); + + return mmc_resume_host(mmc); } -#else + +#else /* CONFIG_PM */ + #define wbsd_suspend NULL #define wbsd_resume NULL -#endif + +#endif /* CONFIG_PM */ static struct platform_device *wbsd_device; -- GitLab From 89358f90ab6f6657d386e77e19c805d7ab88694f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 28 Oct 2005 16:38:02 -0400 Subject: [PATCH 0627/1519] [netdrvr b44] include linux/dma-mapping.h to eliminate warning --- drivers/net/b44.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 225d14fd9239..ab845076ff9f 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- GitLab From b71b95efa5abca33e1bfb85d55162c7f99f54c23 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Fri, 28 Oct 2005 12:23:47 +0200 Subject: [PATCH 0628/1519] [PATCH] sundance: fix DFE-580TX Tx Underrun Under heavy PCI bus load, ports of the DFE-580TX 4-ethernet port board stop working, with currently no other cure than a powercycle. Here is a tested fix. By the way, I also fixed some references and attribution. Signed-off-by: Philippe De Muyter Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 62 ++++++++++++++++++++++++++++++++---------- 1 file changed, 48 insertions(+), 14 deletions(-) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 5de0554fd7c6..0ab9c38b4a34 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -80,7 +80,7 @@ I/O access could affect performance in ARM-based system - Add Linux software VLAN support - Version LK1.08 (D-Link): + Version LK1.08 (Philippe De Muyter phdm@macqel.be): - Fix bug of custom mac address (StationAddr register only accept word write) @@ -91,11 +91,14 @@ Version LK1.09a (ICPlus): - Add the delay time in reading the contents of EEPROM + Version LK1.10 (Philippe De Muyter phdm@macqel.be): + - Make 'unblock interface after Tx underrun' work + */ #define DRV_NAME "sundance" -#define DRV_VERSION "1.01+LK1.09a" -#define DRV_RELDATE "10-Jul-2003" +#define DRV_VERSION "1.01+LK1.10" +#define DRV_RELDATE "28-Oct-2005" /* The user-configurable values. @@ -263,8 +266,10 @@ IV. Notes IVb. References The Sundance ST201 datasheet, preliminary version. -http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html -http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html +The Kendin KS8723 datasheet, preliminary version. +The ICplus IP100 datasheet, preliminary version. +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html IVc. Errata @@ -500,6 +505,25 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int netdev_close(struct net_device *dev); static struct ethtool_ops ethtool_ops; +static void sundance_reset(struct net_device *dev, unsigned long reset_cmd) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base + ASICCtrl; + int countdown; + + /* ST201 documentation states ASICCtrl is a 32bit register */ + iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr); + /* ST201 documentation states reset can take up to 1 ms */ + countdown = 10 + 1; + while (ioread32 (ioaddr) & (ResetBusy << 16)) { + if (--countdown == 0) { + printk(KERN_WARNING "%s : reset not completed !!\n", dev->name); + break; + } + udelay(100); + } +} + static int __devinit sundance_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1190,23 +1214,33 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs ("%s: Transmit status is %2.2x.\n", dev->name, tx_status); if (tx_status & 0x1e) { + if (netif_msg_tx_err(np)) + printk("%s: Transmit error status %4.4x.\n", + dev->name, tx_status); np->stats.tx_errors++; if (tx_status & 0x10) np->stats.tx_fifo_errors++; if (tx_status & 0x08) np->stats.collisions++; + if (tx_status & 0x04) + np->stats.tx_fifo_errors++; if (tx_status & 0x02) np->stats.tx_window_errors++; - /* This reset has not been verified!. */ - if (tx_status & 0x10) { /* Reset the Tx. */ - np->stats.tx_fifo_errors++; - spin_lock(&np->lock); - reset_tx(dev); - spin_unlock(&np->lock); + /* + ** This reset has been verified on + ** DFE-580TX boards ! phdm@macqel.be. + */ + if (tx_status & 0x10) { /* TxUnderrun */ + unsigned short txthreshold; + + txthreshold = ioread16 (ioaddr + TxStartThresh); + /* Restart Tx FIFO and transmitter */ + sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16); + iowrite16 (txthreshold, ioaddr + TxStartThresh); + /* No need to reset the Tx pointer here */ } - if (tx_status & 0x1e) /* Restart the Tx. */ - iowrite16 (TxEnable, - ioaddr + MACCtrl1); + /* Restart the Tx. */ + iowrite16 (TxEnable, ioaddr + MACCtrl1); } /* Yup, this is a documentation bug. It cost me *hours*. */ iowrite16 (0, ioaddr + TxStatus); -- GitLab From 37448f7d39717db7c1098c1a88b9074694c69797 Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Mon, 10 Oct 2005 16:58:14 -0700 Subject: [PATCH 0629/1519] [PATCH] New PowerPC 4xx on-chip ethernet controller driver This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin -- Kconfig | 72 ibm_emac/Makefile | 13 ibm_emac/ibm_emac.h | 418 +++-- ibm_emac/ibm_emac_core.c | 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h | 313 ++-- ibm_emac/ibm_emac_debug.c | 377 ++--- ibm_emac/ibm_emac_debug.h | 63 ibm_emac/ibm_emac_mal.c | 674 +++++---- ibm_emac/ibm_emac_mal.h | 336 +++- ibm_emac/ibm_emac_phy.c | 335 ++-- ibm_emac/ibm_emac_phy.h | 105 - ibm_emac/ibm_emac_rgmii.c | 201 ++ ibm_emac/ibm_emac_rgmii.h | 68 ibm_emac/ibm_emac_tah.c | 111 + ibm_emac/ibm_emac_tah.h | 96 - ibm_emac/ibm_emac_zmii.c | 255 +++ ibm_emac/ibm_emac_zmii.h | 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 72 +- drivers/net/ibm_emac/Makefile | 13 +- drivers/net/ibm_emac/ibm_emac.h | 408 +-- drivers/net/ibm_emac/ibm_emac_core.c | 3402 +++++++++++++------------ drivers/net/ibm_emac/ibm_emac_core.h | 313 ++- drivers/net/ibm_emac/ibm_emac_debug.c | 363 ++- drivers/net/ibm_emac/ibm_emac_debug.h | 63 + drivers/net/ibm_emac/ibm_emac_mal.c | 674 +++-- drivers/net/ibm_emac/ibm_emac_mal.h | 332 ++- drivers/net/ibm_emac/ibm_emac_phy.c | 335 ++- drivers/net/ibm_emac/ibm_emac_phy.h | 105 +- drivers/net/ibm_emac/ibm_emac_rgmii.c | 201 ++ drivers/net/ibm_emac/ibm_emac_rgmii.h | 60 +- drivers/net/ibm_emac/ibm_emac_tah.c | 111 + drivers/net/ibm_emac/ibm_emac_tah.h | 96 +- drivers/net/ibm_emac/ibm_emac_zmii.c | 255 ++ drivers/net/ibm_emac/ibm_emac_zmii.h | 104 +- 17 files changed, 4085 insertions(+), 2822 deletions(-) create mode 100644 drivers/net/ibm_emac/ibm_emac_debug.h create mode 100644 drivers/net/ibm_emac/ibm_emac_rgmii.c create mode 100644 drivers/net/ibm_emac/ibm_emac_tah.c create mode 100644 drivers/net/ibm_emac/ibm_emac_zmii.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 27732fdeeea4..54ab70e7eff4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1163,38 +1163,74 @@ config IBMVETH be called ibmveth. config IBM_EMAC - bool "IBM PPC4xx EMAC driver support" + tristate "PowerPC 4xx on-chip Ethernet support" depends on 4xx - select CRC32 - ---help--- - This driver supports the IBM PPC4xx EMAC family of on-chip - Ethernet controllers. - -config IBM_EMAC_ERRMSG - bool "Verbose error messages" - depends on IBM_EMAC && BROKEN + help + This driver supports the PowerPC 4xx EMAC family of on-chip + Ethernet controllers. config IBM_EMAC_RXB int "Number of receive buffers" depends on IBM_EMAC - default "128" if IBM_EMAC4 - default "64" + default "128" config IBM_EMAC_TXB int "Number of transmit buffers" depends on IBM_EMAC - default "128" if IBM_EMAC4 - default "8" + default "64" + +config IBM_EMAC_POLL_WEIGHT + int "MAL NAPI polling weight" + depends on IBM_EMAC + default "32" -config IBM_EMAC_FGAP - int "Frame gap" +config IBM_EMAC_RX_COPY_THRESHOLD + int "RX skb copy threshold (bytes)" depends on IBM_EMAC - default "8" + default "256" -config IBM_EMAC_SKBRES - int "Skb reserve amount" +config IBM_EMAC_RX_SKB_HEADROOM + int "Additional RX skb headroom (bytes)" depends on IBM_EMAC default "0" + help + Additional receive skb headroom. Note, that driver + will always reserve at least 2 bytes to make IP header + aligned, so usualy there is no need to add any additional + headroom. + + If unsure, set to 0. + +config IBM_EMAC_PHY_RX_CLK_FIX + bool "PHY Rx clock workaround" + depends on IBM_EMAC && (405EP || 440GX || 440EP) + help + Enable this if EMAC attached to a PHY which doesn't generate + RX clock if there is no link, if this is the case, you will + see "TX disable timeout" or "RX disable timeout" in the system + log. + + If unsure, say N. + +config IBM_EMAC_DEBUG + bool "Debugging" + depends on IBM_EMAC + default n + +config IBM_EMAC_ZMII + bool + depends on IBM_EMAC && (NP405H || NP405L || 44x) + default y + +config IBM_EMAC_RGMII + bool + depends on IBM_EMAC && 440GX + default y + +config IBM_EMAC_TAH + bool + depends on IBM_EMAC && 440GX + default y config NET_PCI bool "EISA, VLB, PCI and on board controllers" diff --git a/drivers/net/ibm_emac/Makefile b/drivers/net/ibm_emac/Makefile index 7f583a333c24..f98ddf0e807a 100644 --- a/drivers/net/ibm_emac/Makefile +++ b/drivers/net/ibm_emac/Makefile @@ -1,12 +1,11 @@ # -# Makefile for the IBM PPC4xx EMAC controllers +# Makefile for the PowerPC 4xx on-chip ethernet driver # obj-$(CONFIG_IBM_EMAC) += ibm_emac.o -ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o - -# Only need this if you want to see additional debug messages -ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y) -ibm_emac-objs += ibm_emac_debug.o -endif +ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o +ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o +ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o +ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o +ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h index 15d5a0e82862..28c476f28c20 100644 --- a/drivers/net/ibm_emac/ibm_emac.h +++ b/drivers/net/ibm_emac/ibm_emac.h @@ -1,110 +1,142 @@ /* - * ibm_emac.h + * drivers/net/ibm_emac/ibm_emac.h * + * Register definitions for PowerPC 4xx on-chip ethernet contoller * - * Armin Kuster akuster@mvista.com - * June, 2002 + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Copyright 2002 MontaVista Softare Inc. + * Based on original work by + * Matt Porter + * Armin Kuster + * Copyright 2002-2004 MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ +#ifndef __IBM_EMAC_H_ +#define __IBM_EMAC_H_ + +#include +#include + +/* This is a simple check to prevent use of this driver on non-tested SoCs */ +#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \ + !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \ + !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) +#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK" +#endif + +/* EMAC registers Write Access rules */ +struct emac_regs { + u32 mr0; /* special */ + u32 mr1; /* Reset */ + u32 tmr0; /* special */ + u32 tmr1; /* special */ + u32 rmr; /* Reset */ + u32 isr; /* Always */ + u32 iser; /* Reset */ + u32 iahr; /* Reset, R, T */ + u32 ialr; /* Reset, R, T */ + u32 vtpid; /* Reset, R, T */ + u32 vtci; /* Reset, R, T */ + u32 ptr; /* Reset, T */ + u32 iaht1; /* Reset, R */ + u32 iaht2; /* Reset, R */ + u32 iaht3; /* Reset, R */ + u32 iaht4; /* Reset, R */ + u32 gaht1; /* Reset, R */ + u32 gaht2; /* Reset, R */ + u32 gaht3; /* Reset, R */ + u32 gaht4; /* Reset, R */ + u32 lsah; + u32 lsal; + u32 ipgvr; /* Reset, T */ + u32 stacr; /* special */ + u32 trtr; /* special */ + u32 rwmr; /* Reset */ + u32 octx; + u32 ocrx; + u32 ipcr; +}; + +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_ETHTOOL_REGS_VER 0 +#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32)) +#else +#define EMAC_ETHTOOL_REGS_VER 1 +#define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs) +#endif -#ifndef _IBM_EMAC_H_ -#define _IBM_EMAC_H_ -/* General defines needed for the driver */ +/* EMACx_MR0 */ +#define EMAC_MR0_RXI 0x80000000 +#define EMAC_MR0_TXI 0x40000000 +#define EMAC_MR0_SRST 0x20000000 +#define EMAC_MR0_TXE 0x10000000 +#define EMAC_MR0_RXE 0x08000000 +#define EMAC_MR0_WKE 0x04000000 -/* Emac */ -typedef struct emac_regs { - u32 em0mr0; - u32 em0mr1; - u32 em0tmr0; - u32 em0tmr1; - u32 em0rmr; - u32 em0isr; - u32 em0iser; - u32 em0iahr; - u32 em0ialr; - u32 em0vtpid; - u32 em0vtci; - u32 em0ptr; - u32 em0iaht1; - u32 em0iaht2; - u32 em0iaht3; - u32 em0iaht4; - u32 em0gaht1; - u32 em0gaht2; - u32 em0gaht3; - u32 em0gaht4; - u32 em0lsah; - u32 em0lsal; - u32 em0ipgvr; - u32 em0stacr; - u32 em0trtr; - u32 em0rwmr; -} emac_t; +/* EMACx_MR1 */ +#define EMAC_MR1_FDE 0x80000000 +#define EMAC_MR1_ILE 0x40000000 +#define EMAC_MR1_VLE 0x20000000 +#define EMAC_MR1_EIFC 0x10000000 +#define EMAC_MR1_APP 0x08000000 +#define EMAC_MR1_IST 0x01000000 -/* MODE REG 0 */ -#define EMAC_M0_RXI 0x80000000 -#define EMAC_M0_TXI 0x40000000 -#define EMAC_M0_SRST 0x20000000 -#define EMAC_M0_TXE 0x10000000 -#define EMAC_M0_RXE 0x08000000 -#define EMAC_M0_WKE 0x04000000 +#define EMAC_MR1_MF_MASK 0x00c00000 +#define EMAC_MR1_MF_10 0x00000000 +#define EMAC_MR1_MF_100 0x00400000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_MR1_MF_1000 0x00000000 +#define EMAC_MR1_MF_1000GPCS 0x00000000 +#define EMAC_MR1_MF_IPPA(id) 0x00000000 +#else +#define EMAC_MR1_MF_1000 0x00800000 +#define EMAC_MR1_MF_1000GPCS 0x00c00000 +#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6) +#endif -/* MODE Reg 1 */ -#define EMAC_M1_FDE 0x80000000 -#define EMAC_M1_ILE 0x40000000 -#define EMAC_M1_VLE 0x20000000 -#define EMAC_M1_EIFC 0x10000000 -#define EMAC_M1_APP 0x08000000 -#define EMAC_M1_AEMI 0x02000000 -#define EMAC_M1_IST 0x01000000 -#define EMAC_M1_MF_1000GPCS 0x00c00000 /* Internal GPCS */ -#define EMAC_M1_MF_1000MBPS 0x00800000 /* External GPCS */ -#define EMAC_M1_MF_100MBPS 0x00400000 -#define EMAC_M1_RFS_16K 0x00280000 /* 000 for 512 byte */ -#define EMAC_M1_TR 0x00008000 -#ifdef CONFIG_IBM_EMAC4 -#define EMAC_M1_RFS_8K 0x00200000 -#define EMAC_M1_RFS_4K 0x00180000 -#define EMAC_M1_RFS_2K 0x00100000 -#define EMAC_M1_RFS_1K 0x00080000 -#define EMAC_M1_TX_FIFO_16K 0x00050000 /* 0's for 512 byte */ -#define EMAC_M1_TX_FIFO_8K 0x00040000 -#define EMAC_M1_TX_FIFO_4K 0x00030000 -#define EMAC_M1_TX_FIFO_2K 0x00020000 -#define EMAC_M1_TX_FIFO_1K 0x00010000 -#define EMAC_M1_TX_TR 0x00008000 -#define EMAC_M1_TX_MWSW 0x00001000 /* 0 wait for status */ -#define EMAC_M1_JUMBO_ENABLE 0x00000800 /* Upt to 9Kr status */ -#define EMAC_M1_OPB_CLK_66 0x00000008 /* 66Mhz */ -#define EMAC_M1_OPB_CLK_83 0x00000010 /* 83Mhz */ -#define EMAC_M1_OPB_CLK_100 0x00000018 /* 100Mhz */ -#define EMAC_M1_OPB_CLK_100P 0x00000020 /* 100Mhz+ */ -#else /* CONFIG_IBM_EMAC4 */ -#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */ -#define EMAC_M1_RFS_2K 0x00200000 -#define EMAC_M1_RFS_1K 0x00100000 -#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */ -#define EMAC_M1_TX_FIFO_1K 0x00040000 -#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */ -#define EMAC_M1_TR1_DEPEND 0x00004000 -#define EMAC_M1_TR1_MULTI 0x00002000 -#define EMAC_M1_JUMBO_ENABLE 0x00001000 -#endif /* CONFIG_IBM_EMAC4 */ -#define EMAC_M1_BASE (EMAC_M1_TX_FIFO_2K | \ - EMAC_M1_APP | \ - EMAC_M1_TR | EMAC_M1_VLE) +#define EMAC_TX_FIFO_SIZE 2048 -/* Transmit Mode Register 0 */ -#define EMAC_TMR0_GNP0 0x80000000 -#define EMAC_TMR0_GNP1 0x40000000 -#define EMAC_TMR0_GNPD 0x20000000 -#define EMAC_TMR0_FC 0x10000000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_MR1_RFS_4K 0x00300000 +#define EMAC_MR1_RFS_16K 0x00000000 +#define EMAC_RX_FIFO_SIZE(gige) 4096 +#define EMAC_MR1_TFS_2K 0x00080000 +#define EMAC_MR1_TR0_MULT 0x00008000 +#define EMAC_MR1_JPSM 0x00000000 +#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT) +#else +#define EMAC_MR1_RFS_4K 0x00180000 +#define EMAC_MR1_RFS_16K 0x00280000 +#define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096) +#define EMAC_MR1_TFS_2K 0x00020000 +#define EMAC_MR1_TR 0x00008000 +#define EMAC_MR1_MWSW_001 0x00001000 +#define EMAC_MR1_JPSM 0x00000800 +#define EMAC_MR1_OBCI_MASK 0x00000038 +#define EMAC_MR1_OBCI_50 0x00000000 +#define EMAC_MR1_OBCI_66 0x00000008 +#define EMAC_MR1_OBCI_83 0x00000010 +#define EMAC_MR1_OBCI_100 0x00000018 +#define EMAC_MR1_OBCI_100P 0x00000020 +#define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \ + (freq) <= 66 ? EMAC_MR1_OBCI_66 : \ + (freq) <= 83 ? EMAC_MR1_OBCI_83 : \ + (freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P) +#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \ + EMAC_MR1_MWSW_001 | EMAC_MR1_OBCI(opb)) +#endif + +/* EMACx_TMR0 */ +#define EMAC_TMR0_GNP 0x80000000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_TMR0_DEFAULT 0x00000000 +#else #define EMAC_TMR0_TFAE_2_32 0x00000001 #define EMAC_TMR0_TFAE_4_64 0x00000002 #define EMAC_TMR0_TFAE_8_128 0x00000003 @@ -112,14 +144,36 @@ typedef struct emac_regs { #define EMAC_TMR0_TFAE_32_512 0x00000005 #define EMAC_TMR0_TFAE_64_1024 0x00000006 #define EMAC_TMR0_TFAE_128_2048 0x00000007 +#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32 +#endif +#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT) + +/* EMACx_TMR1 */ + +/* IBM manuals are not very clear here. + * This is my interpretation of how things are. --ebs + */ +#if defined(CONFIG_40x) +#define EMAC_FIFO_ENTRY_SIZE 8 +#define EMAC_MAL_BURST_SIZE (16 * 4) +#else +#define EMAC_FIFO_ENTRY_SIZE 16 +#define EMAC_MAL_BURST_SIZE (64 * 4) +#endif + +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16)) +#else +#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14)) +#endif -/* Receive Mode Register */ +/* EMACx_RMR */ #define EMAC_RMR_SP 0x80000000 #define EMAC_RMR_SFCS 0x40000000 -#define EMAC_RMR_ARRP 0x20000000 -#define EMAC_RMR_ARP 0x10000000 -#define EMAC_RMR_AROP 0x08000000 -#define EMAC_RMR_ARPI 0x04000000 +#define EMAC_RMR_RRP 0x20000000 +#define EMAC_RMR_RFP 0x10000000 +#define EMAC_RMR_ROP 0x08000000 +#define EMAC_RMR_RPIR 0x04000000 #define EMAC_RMR_PPP 0x02000000 #define EMAC_RMR_PME 0x01000000 #define EMAC_RMR_PMME 0x00800000 @@ -127,6 +181,9 @@ typedef struct emac_regs { #define EMAC_RMR_MIAE 0x00200000 #define EMAC_RMR_BAE 0x00100000 #define EMAC_RMR_MAE 0x00080000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_RMR_BASE 0x00000000 +#else #define EMAC_RMR_RFAF_2_32 0x00000001 #define EMAC_RMR_RFAF_4_64 0x00000002 #define EMAC_RMR_RFAF_8_128 0x00000003 @@ -134,9 +191,21 @@ typedef struct emac_regs { #define EMAC_RMR_RFAF_32_512 0x00000005 #define EMAC_RMR_RFAF_64_1024 0x00000006 #define EMAC_RMR_RFAF_128_2048 0x00000007 -#define EMAC_RMR_BASE (EMAC_RMR_IAE | EMAC_RMR_BAE) +#define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048 +#endif -/* Interrupt Status & enable Regs */ +/* EMACx_ISR & EMACx_ISER */ +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_ISR_TXPE 0x00000000 +#define EMAC_ISR_RXPE 0x00000000 +#define EMAC_ISR_TXUE 0x00000000 +#define EMAC_ISR_RXOE 0x00000000 +#else +#define EMAC_ISR_TXPE 0x20000000 +#define EMAC_ISR_RXPE 0x10000000 +#define EMAC_ISR_TXUE 0x08000000 +#define EMAC_ISR_RXOE 0x04000000 +#endif #define EMAC_ISR_OVR 0x02000000 #define EMAC_ISR_PP 0x01000000 #define EMAC_ISR_BP 0x00800000 @@ -147,53 +216,62 @@ typedef struct emac_regs { #define EMAC_ISR_PTLE 0x00040000 #define EMAC_ISR_ORE 0x00020000 #define EMAC_ISR_IRE 0x00010000 -#define EMAC_ISR_DBDM 0x00000200 -#define EMAC_ISR_DB0 0x00000100 -#define EMAC_ISR_SE0 0x00000080 -#define EMAC_ISR_TE0 0x00000040 -#define EMAC_ISR_DB1 0x00000020 -#define EMAC_ISR_SE1 0x00000010 -#define EMAC_ISR_TE1 0x00000008 +#define EMAC_ISR_SQE 0x00000080 +#define EMAC_ISR_TE 0x00000040 #define EMAC_ISR_MOS 0x00000002 #define EMAC_ISR_MOF 0x00000001 -/* STA CONTROL REG */ +/* EMACx_STACR */ +#define EMAC_STACR_PHYD_MASK 0xffff +#define EMAC_STACR_PHYD_SHIFT 16 #define EMAC_STACR_OC 0x00008000 #define EMAC_STACR_PHYE 0x00004000 -#define EMAC_STACR_WRITE 0x00002000 -#define EMAC_STACR_READ 0x00001000 -#define EMAC_STACR_CLK_83MHZ 0x00000800 /* 0's for 50Mhz */ -#define EMAC_STACR_CLK_66MHZ 0x00000400 -#define EMAC_STACR_CLK_100MHZ 0x00000C00 +#define EMAC_STACR_STAC_MASK 0x00003000 +#define EMAC_STACR_STAC_READ 0x00001000 +#define EMAC_STACR_STAC_WRITE 0x00002000 +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_STACR_OPBC_MASK 0x00000C00 +#define EMAC_STACR_OPBC_50 0x00000000 +#define EMAC_STACR_OPBC_66 0x00000400 +#define EMAC_STACR_OPBC_83 0x00000800 +#define EMAC_STACR_OPBC_100 0x00000C00 +#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \ + (freq) <= 66 ? EMAC_STACR_OPBC_66 : \ + (freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100) +#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb) +#else +#define EMAC_STACR_BASE(opb) 0x00000000 +#endif +#define EMAC_STACR_PCDA_MASK 0x1f +#define EMAC_STACR_PCDA_SHIFT 5 +#define EMAC_STACR_PRA_MASK 0x1f + +/* EMACx_TRTR */ +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_TRTR_SHIFT 27 +#else +#define EMAC_TRTR_SHIFT 24 +#endif +#define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT) -/* Transmit Request Threshold Register */ -#define EMAC_TRTR_1600 0x18000000 /* 0's for 64 Bytes */ -#define EMAC_TRTR_1024 0x0f000000 -#define EMAC_TRTR_512 0x07000000 -#define EMAC_TRTR_256 0x03000000 -#define EMAC_TRTR_192 0x10000000 -#define EMAC_TRTR_128 0x01000000 +/* EMACx_RWMR */ +#if !defined(CONFIG_IBM_EMAC4) +#define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7)) +#else +#define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6)) +#endif +/* EMAC specific TX descriptor control fields (write access) */ #define EMAC_TX_CTRL_GFCS 0x0200 #define EMAC_TX_CTRL_GP 0x0100 #define EMAC_TX_CTRL_ISA 0x0080 #define EMAC_TX_CTRL_RSA 0x0040 #define EMAC_TX_CTRL_IVT 0x0020 #define EMAC_TX_CTRL_RVT 0x0010 -#define EMAC_TX_CTRL_TAH_CSUM 0x000e /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG4 0x000a /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG3 0x0008 /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG2 0x0006 /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG1 0x0004 /* TAH only */ -#define EMAC_TX_CTRL_TAH_SEG0 0x0002 /* TAH only */ -#define EMAC_TX_CTRL_TAH_DIS 0x0000 /* TAH only */ +#define EMAC_TX_CTRL_TAH_CSUM 0x000e -#define EMAC_TX_CTRL_DFLT ( \ - MAL_TX_CTRL_INTR | EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP ) - -/* madmal transmit status / Control bits */ +/* EMAC specific TX descriptor status fields (read access) */ #define EMAC_TX_ST_BFCS 0x0200 -#define EMAC_TX_ST_BPP 0x0100 #define EMAC_TX_ST_LCS 0x0080 #define EMAC_TX_ST_ED 0x0040 #define EMAC_TX_ST_EC 0x0020 @@ -202,8 +280,16 @@ typedef struct emac_regs { #define EMAC_TX_ST_SC 0x0004 #define EMAC_TX_ST_UR 0x0002 #define EMAC_TX_ST_SQE 0x0001 +#if !defined(CONFIG_IBM_EMAC_TAH) +#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ + EMAC_TX_ST_EC | EMAC_TX_ST_LC | \ + EMAC_TX_ST_MC | EMAC_TX_ST_UR)) +#else +#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \ + EMAC_TX_ST_EC | EMAC_TX_ST_LC)) +#endif -/* madmal receive status / Control bits */ +/* EMAC specific RX descriptor status fields (read access) */ #define EMAC_RX_ST_OE 0x0200 #define EMAC_RX_ST_PP 0x0100 #define EMAC_RX_ST_BP 0x0080 @@ -214,54 +300,10 @@ typedef struct emac_regs { #define EMAC_RX_ST_PTL 0x0004 #define EMAC_RX_ST_ORE 0x0002 #define EMAC_RX_ST_IRE 0x0001 -#define EMAC_BAD_RX_PACKET 0x02ff -#define EMAC_CSUM_VER_ERROR 0x0003 - -/* identify a bad rx packet dependent on emac features */ -#ifdef CONFIG_IBM_EMAC4 -#define EMAC_IS_BAD_RX_PACKET(desc) \ - (((desc & (EMAC_BAD_RX_PACKET & ~EMAC_CSUM_VER_ERROR)) || \ - ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_ORE) || \ - ((desc & EMAC_CSUM_VER_ERROR) == EMAC_RX_ST_IRE))) -#else -#define EMAC_IS_BAD_RX_PACKET(desc) \ - (desc & EMAC_BAD_RX_PACKET) -#endif - -/* SoC implementation specific EMAC register defaults */ -#if defined(CONFIG_440GP) -#define EMAC_RWMR_DEFAULT 0x80009000 -#define EMAC_TMR0_DEFAULT 0x00000000 -#define EMAC_TMR1_DEFAULT 0xf8640000 -#elif defined(CONFIG_440GX) -#define EMAC_RWMR_DEFAULT 0x1000a200 -#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32 -#define EMAC_TMR1_DEFAULT 0xa00f0000 -#elif defined(CONFIG_440SP) -#define EMAC_RWMR_DEFAULT 0x08002000 -#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_128_2048 -#define EMAC_TMR1_DEFAULT 0xf8200000 -#else -#define EMAC_RWMR_DEFAULT 0x0f002000 -#define EMAC_TMR0_DEFAULT 0x00000000 -#define EMAC_TMR1_DEFAULT 0x380f0000 -#endif /* CONFIG_440GP */ - -/* Revision specific EMAC register defaults */ -#ifdef CONFIG_IBM_EMAC4 -#define EMAC_M1_DEFAULT (EMAC_M1_BASE | \ - EMAC_M1_OPB_CLK_83 | \ - EMAC_M1_TX_MWSW) -#define EMAC_RMR_DEFAULT (EMAC_RMR_BASE | \ - EMAC_RMR_RFAF_128_2048) -#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP0 | \ - EMAC_TMR0_DEFAULT) -#define EMAC_TRTR_DEFAULT EMAC_TRTR_1024 -#else /* !CONFIG_IBM_EMAC4 */ -#define EMAC_M1_DEFAULT EMAC_M1_BASE -#define EMAC_RMR_DEFAULT EMAC_RMR_BASE -#define EMAC_TMR0_XMIT EMAC_TMR0_GNP0 -#define EMAC_TRTR_DEFAULT EMAC_TRTR_1600 -#endif /* CONFIG_IBM_EMAC4 */ - -#endif +#define EMAC_RX_TAH_BAD_CSUM 0x0003 +#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \ + EMAC_RX_ST_RP | EMAC_RX_ST_SE | \ + EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \ + EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \ + EMAC_RX_ST_IRE ) +#endif /* __IBM_EMAC_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 14e9b6315f20..943fbd1546ff 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1,13 +1,14 @@ /* - * ibm_emac_core.c + * drivers/net/ibm_emac/ibm_emac_core.c * - * Ethernet driver for the built in ethernet on the IBM 4xx PowerPC - * processors. - * - * (c) 2003 Benjamin Herrenschmidt + * Driver for PowerPC 4xx on-chip ethernet controller. * - * Based on original work by + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * + * Based on original work by + * Matt Porter + * (c) 2003 Benjamin Herrenschmidt * Armin Kuster * Johnnie Peters * @@ -15,29 +16,24 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * TODO - * - Check for races in the "remove" code path - * - Add some Power Management to the MAC and the PHY - * - Audit remaining of non-rewritten code (--BenH) - * - Cleanup message display using msglevel mecanism - * - Address all errata - * - Audit all register update paths to ensure they - * are being written post soft reset if required. + * */ + +#include #include #include #include #include -#include -#include #include -#include -#include #include #include #include #include -#include +#include +#include +#include +#include +#include #include #include #include @@ -45,1691 +41,1893 @@ #include #include #include -#include #include #include -#include -#include -#include -#include - #include "ibm_emac_core.h" - -//#define MDIO_DEBUG(fmt) printk fmt -#define MDIO_DEBUG(fmt) - -//#define LINK_DEBUG(fmt) printk fmt -#define LINK_DEBUG(fmt) - -//#define PKT_DEBUG(fmt) printk fmt -#define PKT_DEBUG(fmt) - -#define DRV_NAME "emac" -#define DRV_VERSION "2.0" -#define DRV_AUTHOR "Benjamin Herrenschmidt " -#define DRV_DESC "IBM EMAC Ethernet driver" +#include "ibm_emac_debug.h" /* - * When mdio_idx >= 0, contains a list of emac ocp_devs - * that have had their initialization deferred until the - * common MDIO controller has been initialized. + * Lack of dma_unmap_???? calls is intentional. + * + * API-correct usage requires additional support state information to be + * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to + * EMAC design (e.g. TX buffer passed from network stack can be split into + * several BDs, dma_map_single/dma_map_page can be used to map particular BD), + * maintaining such information will add additional overhead. + * Current DMA API implementation for 4xx processors only ensures cache coherency + * and dma_unmap_???? routines are empty and are likely to stay this way. + * I decided to omit dma_unmap_??? calls because I don't want to add additional + * complexity just for the sake of following some abstract API, when it doesn't + * add any real benefit to the driver. I understand that this decision maybe + * controversial, but I really tried to make code API-correct and efficient + * at the same time and didn't come up with code I liked :(. --ebs */ -LIST_HEAD(emac_init_list); -MODULE_AUTHOR(DRV_AUTHOR); +#define DRV_NAME "emac" +#define DRV_VERSION "3.53" +#define DRV_DESC "PPC 4xx OCP EMAC driver" + MODULE_DESCRIPTION(DRV_DESC); +MODULE_AUTHOR + ("Eugene Surovegin or "); MODULE_LICENSE("GPL"); -static int skb_res = SKB_RES; -module_param(skb_res, int, 0444); -MODULE_PARM_DESC(skb_res, "Amount of data to reserve on skb buffs\n" - "The 405 handles a misaligned IP header fine but\n" - "this can help if you are routing to a tunnel or a\n" - "device that needs aligned data. 0..2"); +/* minimum number of free TX descriptors required to wake up TX process */ +#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4) -#define RGMII_PRIV(ocpdev) ((struct ibm_ocp_rgmii*)ocp_get_drvdata(ocpdev)) - -static unsigned int rgmii_enable[] = { - RGMII_RTBI, - RGMII_RGMII, - RGMII_TBI, - RGMII_GMII -}; +/* If packet size is less than this number, we allocate small skb and copy packet + * contents into it instead of just sending original big skb up + */ +#define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD -static unsigned int rgmii_speed_mask[] = { - RGMII_MII2_SPDMASK, - RGMII_MII3_SPDMASK -}; +/* Since multiple EMACs share MDIO lines in various ways, we need + * to avoid re-using the same PHY ID in cases where the arch didn't + * setup precise phy_map entries + */ +static u32 busy_phy_map; -static unsigned int rgmii_speed100[] = { - RGMII_MII2_100MB, - RGMII_MII3_100MB -}; +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP)) +/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us + * with PHY RX clock problem. + * 440EP has more sane SDR0_MFR register implementation than 440GX, which + * also allows controlling each EMAC clock + */ +static inline void EMAC_RX_CLK_TX(int idx) +{ + unsigned long flags; + local_irq_save(flags); -static unsigned int rgmii_speed1000[] = { - RGMII_MII2_1000MB, - RGMII_MII3_1000MB -}; +#if defined(CONFIG_405EP) + mtdcr(0xf3, mfdcr(0xf3) | (1 << idx)); +#else /* CONFIG_440EP */ + SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx)); +#endif -#define ZMII_PRIV(ocpdev) ((struct ibm_ocp_zmii*)ocp_get_drvdata(ocpdev)) + local_irq_restore(flags); +} -static unsigned int zmii_enable[][4] = { - {ZMII_SMII0, ZMII_RMII0, ZMII_MII0, - ~(ZMII_MDI1 | ZMII_MDI2 | ZMII_MDI3)}, - {ZMII_SMII1, ZMII_RMII1, ZMII_MII1, - ~(ZMII_MDI0 | ZMII_MDI2 | ZMII_MDI3)}, - {ZMII_SMII2, ZMII_RMII2, ZMII_MII2, - ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI3)}, - {ZMII_SMII3, ZMII_RMII3, ZMII_MII3, ~(ZMII_MDI0 | ZMII_MDI1 | ZMII_MDI2)} -}; +static inline void EMAC_RX_CLK_DEFAULT(int idx) +{ + unsigned long flags; + local_irq_save(flags); -static unsigned int mdi_enable[] = { - ZMII_MDI0, - ZMII_MDI1, - ZMII_MDI2, - ZMII_MDI3 -}; +#if defined(CONFIG_405EP) + mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx)); +#else /* CONFIG_440EP */ + SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx)); +#endif -static unsigned int zmii_speed = 0x0; -static unsigned int zmii_speed100[] = { - ZMII_MII0_100MB, - ZMII_MII1_100MB, - ZMII_MII2_100MB, - ZMII_MII3_100MB -}; + local_irq_restore(flags); +} +#else +#define EMAC_RX_CLK_TX(idx) ((void)0) +#define EMAC_RX_CLK_DEFAULT(idx) ((void)0) +#endif -/* Since multiple EMACs share MDIO lines in various ways, we need - * to avoid re-using the same PHY ID in cases where the arch didn't - * setup precise phy_map entries +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX) +/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS], + * unfortunately this is less flexible than 440EP case, because it's a global + * setting for all EMACs, therefore we do this clock trick only during probe. */ -static u32 busy_phy_map = 0; +#define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \ + SDR_READ(DCRN_SDR_MFR) | 0x08000000) +#define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \ + SDR_READ(DCRN_SDR_MFR) & ~0x08000000) +#else +#define EMAC_CLK_INTERNAL ((void)0) +#define EMAC_CLK_EXTERNAL ((void)0) +#endif -/* If EMACs share a common MDIO device, this points to it */ -static struct net_device *mdio_ndev = NULL; +/* I don't want to litter system log with timeout errors + * when we have brain-damaged PHY. + */ +static inline void emac_report_timeout_error(struct ocp_enet_private *dev, + const char *error) +{ +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) + DBG("%d: %s" NL, dev->def->index, error); +#else + if (net_ratelimit()) + printk(KERN_ERR "emac%d: %s\n", dev->def->index, error); +#endif +} -struct emac_def_dev { - struct list_head link; - struct ocp_device *ocpdev; - struct ibm_ocp_mal *mal; +/* PHY polling intervals */ +#define PHY_POLL_LINK_ON HZ +#define PHY_POLL_LINK_OFF (HZ / 5) + +/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */ +static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = { + "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum", + "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom", + "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu", + "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet", + "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error", + "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range", + "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun", + "rx_bad_packet", "rx_runt_packet", "rx_short_event", + "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long", + "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors", + "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral", + "tx_bd_excessive_collisions", "tx_bd_late_collision", + "tx_bd_multple_collisions", "tx_bd_single_collision", + "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe", + "tx_errors" }; -static struct net_device_stats *emac_stats(struct net_device *dev) +static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs); +static void emac_clean_tx_ring(struct ocp_enet_private *dev); + +static inline int emac_phy_supports_gige(int phy_mode) { - struct ocp_enet_private *fep = dev->priv; - return &fep->stats; -}; + return phy_mode == PHY_MODE_GMII || + phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} -static int -emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode) +static inline int emac_phy_gpcs(int phy_mode) { - struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(rgmii_dev); - const char *mode_name[] = { "RTBI", "RGMII", "TBI", "GMII" }; - int mode = -1; + return phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} - if (!rgmii) { - rgmii = kmalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL); +static inline void emac_tx_enable(struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - if (rgmii == NULL) { - printk(KERN_ERR - "rgmii%d: Out of memory allocating RGMII structure!\n", - rgmii_dev->def->index); - return -ENOMEM; - } + local_irq_save(flags); - memset(rgmii, 0, sizeof(*rgmii)); + DBG("%d: tx_enable" NL, dev->def->index); - rgmii->base = - (struct rgmii_regs *)ioremap(rgmii_dev->def->paddr, - sizeof(*rgmii->base)); - if (rgmii->base == NULL) { - printk(KERN_ERR - "rgmii%d: Cannot ioremap bridge registers!\n", - rgmii_dev->def->index); + r = in_be32(&p->mr0); + if (!(r & EMAC_MR0_TXE)) + out_be32(&p->mr0, r | EMAC_MR0_TXE); + local_irq_restore(flags); +} - kfree(rgmii); - return -ENOMEM; - } - ocp_set_drvdata(rgmii_dev, rgmii); - } +static void emac_tx_disable(struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - if (phy_mode) { - switch (phy_mode) { - case PHY_MODE_GMII: - mode = GMII; - break; - case PHY_MODE_TBI: - mode = TBI; - break; - case PHY_MODE_RTBI: - mode = RTBI; - break; - case PHY_MODE_RGMII: - default: - mode = RGMII; - } - rgmii->base->fer &= ~RGMII_FER_MASK(input); - rgmii->base->fer |= rgmii_enable[mode] << (4 * input); - } else { - switch ((rgmii->base->fer & RGMII_FER_MASK(input)) >> (4 * - input)) { - case RGMII_RTBI: - mode = RTBI; - break; - case RGMII_RGMII: - mode = RGMII; - break; - case RGMII_TBI: - mode = TBI; - break; - case RGMII_GMII: - mode = GMII; - } - } + local_irq_save(flags); - /* Set mode to RGMII if nothing valid is detected */ - if (mode < 0) - mode = RGMII; + DBG("%d: tx_disable" NL, dev->def->index); + + r = in_be32(&p->mr0); + if (r & EMAC_MR0_TXE) { + int n = 300; + out_be32(&p->mr0, r & ~EMAC_MR0_TXE); + while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) + --n; + if (unlikely(!n)) + emac_report_timeout_error(dev, "TX disable timeout"); + } + local_irq_restore(flags); +} - printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n", - rgmii_dev->def->index, input, mode_name[mode]); +static void emac_rx_enable(struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - rgmii->mode[input] = mode; - rgmii->users++; + local_irq_save(flags); + if (unlikely(dev->commac.rx_stopped)) + goto out; - return 0; + DBG("%d: rx_enable" NL, dev->def->index); + + r = in_be32(&p->mr0); + if (!(r & EMAC_MR0_RXE)) { + if (unlikely(!(r & EMAC_MR0_RXI))) { + /* Wait if previous async disable is still in progress */ + int n = 100; + while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) + --n; + if (unlikely(!n)) + emac_report_timeout_error(dev, + "RX disable timeout"); + } + out_be32(&p->mr0, r | EMAC_MR0_RXE); + } + out: + local_irq_restore(flags); } -static void -emac_rgmii_port_speed(struct ocp_device *ocpdev, int input, int speed) +static void emac_rx_disable(struct ocp_enet_private *dev) { - struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev); - unsigned int rgmii_speed; - - rgmii_speed = in_be32(&rgmii->base->ssr); + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - rgmii_speed &= ~rgmii_speed_mask[input]; + local_irq_save(flags); - if (speed == 1000) - rgmii_speed |= rgmii_speed1000[input]; - else if (speed == 100) - rgmii_speed |= rgmii_speed100[input]; + DBG("%d: rx_disable" NL, dev->def->index); - out_be32(&rgmii->base->ssr, rgmii_speed); + r = in_be32(&p->mr0); + if (r & EMAC_MR0_RXE) { + int n = 300; + out_be32(&p->mr0, r & ~EMAC_MR0_RXE); + while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) + --n; + if (unlikely(!n)) + emac_report_timeout_error(dev, "RX disable timeout"); + } + local_irq_restore(flags); } -static void emac_close_rgmii(struct ocp_device *ocpdev) +static inline void emac_rx_disable_async(struct ocp_enet_private *dev) { - struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(ocpdev); - BUG_ON(!rgmii || rgmii->users == 0); + struct emac_regs *p = dev->emacp; + unsigned long flags; + u32 r; - if (!--rgmii->users) { - ocp_set_drvdata(ocpdev, NULL); - iounmap((void *)rgmii->base); - kfree(rgmii); - } + local_irq_save(flags); + + DBG("%d: rx_disable_async" NL, dev->def->index); + + r = in_be32(&p->mr0); + if (r & EMAC_MR0_RXE) + out_be32(&p->mr0, r & ~EMAC_MR0_RXE); + local_irq_restore(flags); } -static int emac_init_zmii(struct ocp_device *zmii_dev, int input, int phy_mode) +static int emac_reset(struct ocp_enet_private *dev) { - struct ibm_ocp_zmii *zmii = ZMII_PRIV(zmii_dev); - const char *mode_name[] = { "SMII", "RMII", "MII" }; - int mode = -1; + struct emac_regs *p = dev->emacp; + unsigned long flags; + int n = 20; - if (!zmii) { - zmii = kmalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL); - if (zmii == NULL) { - printk(KERN_ERR - "zmii%d: Out of memory allocating ZMII structure!\n", - zmii_dev->def->index); - return -ENOMEM; - } - memset(zmii, 0, sizeof(*zmii)); + DBG("%d: reset" NL, dev->def->index); - zmii->base = - (struct zmii_regs *)ioremap(zmii_dev->def->paddr, - sizeof(*zmii->base)); - if (zmii->base == NULL) { - printk(KERN_ERR - "zmii%d: Cannot ioremap bridge registers!\n", - zmii_dev->def->index); + local_irq_save(flags); - kfree(zmii); - return -ENOMEM; - } - ocp_set_drvdata(zmii_dev, zmii); + if (!dev->reset_failed) { + /* 40x erratum suggests stopping RX channel before reset, + * we stop TX as well + */ + emac_rx_disable(dev); + emac_tx_disable(dev); } - if (phy_mode) { - switch (phy_mode) { - case PHY_MODE_MII: - mode = MII; - break; - case PHY_MODE_RMII: - mode = RMII; - break; - case PHY_MODE_SMII: - default: - mode = SMII; - } - zmii->base->fer &= ~ZMII_FER_MASK(input); - zmii->base->fer |= zmii_enable[input][mode]; + out_be32(&p->mr0, EMAC_MR0_SRST); + while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) + --n; + local_irq_restore(flags); + + if (n) { + dev->reset_failed = 0; + return 0; } else { - switch ((zmii->base->fer & ZMII_FER_MASK(input)) << (4 * input)) { - case ZMII_MII0: - mode = MII; - break; - case ZMII_RMII0: - mode = RMII; - break; - case ZMII_SMII0: - mode = SMII; - } + emac_report_timeout_error(dev, "reset timeout"); + dev->reset_failed = 1; + return -ETIMEDOUT; } +} - /* Set mode to SMII if nothing valid is detected */ - if (mode < 0) - mode = SMII; +static void emac_hash_mc(struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + u16 gaht[4] = { 0 }; + struct dev_mc_list *dmi; - printk(KERN_NOTICE "zmii%d: input %d in %s mode\n", - zmii_dev->def->index, input, mode_name[mode]); + DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count); - zmii->mode[input] = mode; - zmii->users++; + for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) { + int bit; + DBG2("%d: mc %02x:%02x:%02x:%02x:%02x:%02x" NL, + dev->def->index, + dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2], + dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]); - return 0; + bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26); + gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f); + } + out_be32(&p->gaht1, gaht[0]); + out_be32(&p->gaht2, gaht[1]); + out_be32(&p->gaht3, gaht[2]); + out_be32(&p->gaht4, gaht[3]); } -static void emac_enable_zmii_port(struct ocp_device *ocpdev, int input) +static inline u32 emac_iff2rmr(struct net_device *ndev) { - u32 mask; - struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); + u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE | + EMAC_RMR_BASE; + + if (ndev->flags & IFF_PROMISC) + r |= EMAC_RMR_PME; + else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32) + r |= EMAC_RMR_PMME; + else if (ndev->mc_count > 0) + r |= EMAC_RMR_MAE; - mask = in_be32(&zmii->base->fer); - mask &= zmii_enable[input][MDI]; /* turn all non enabled MDI's off */ - mask |= zmii_enable[input][zmii->mode[input]] | mdi_enable[input]; - out_be32(&zmii->base->fer, mask); + return r; } -static void -emac_zmii_port_speed(struct ocp_device *ocpdev, int input, int speed) +static inline int emac_opb_mhz(void) { - struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); - - if (speed == 100) - zmii_speed |= zmii_speed100[input]; - else - zmii_speed &= ~zmii_speed100[input]; - - out_be32(&zmii->base->ssr, zmii_speed); + return (ocp_sys_info.opb_bus_freq + 500000) / 1000000; } -static void emac_close_zmii(struct ocp_device *ocpdev) +/* BHs disabled */ +static int emac_configure(struct ocp_enet_private *dev) { - struct ibm_ocp_zmii *zmii = ZMII_PRIV(ocpdev); - BUG_ON(!zmii || zmii->users == 0); + struct emac_regs *p = dev->emacp; + struct net_device *ndev = dev->ndev; + int gige; + u32 r; - if (!--zmii->users) { - ocp_set_drvdata(ocpdev, NULL); - iounmap((void *)zmii->base); - kfree(zmii); - } -} + DBG("%d: configure" NL, dev->def->index); -int emac_phy_read(struct net_device *dev, int mii_id, int reg) -{ - int count; - uint32_t stacr; - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; + if (emac_reset(dev) < 0) + return -ETIMEDOUT; - MDIO_DEBUG(("%s: phy_read, id: 0x%x, reg: 0x%x\n", dev->name, mii_id, - reg)); + tah_reset(dev->tah_dev); - /* Enable proper ZMII port */ - if (fep->zmii_dev) - emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input); + /* Mode register */ + r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST; + if (dev->phy.duplex == DUPLEX_FULL) + r |= EMAC_MR1_FDE; + switch (dev->phy.speed) { + case SPEED_1000: + if (emac_phy_gpcs(dev->phy.mode)) { + r |= EMAC_MR1_MF_1000GPCS | + EMAC_MR1_MF_IPPA(dev->phy.address); - /* Use the EMAC that has the MDIO port */ - if (fep->mdio_dev) { - dev = fep->mdio_dev; - fep = dev->priv; - emacp = fep->emacp; + /* Put some arbitrary OUI, Manuf & Rev IDs so we can + * identify this GPCS PHY later. + */ + out_be32(&p->ipcr, 0xdeadbeef); + } else + r |= EMAC_MR1_MF_1000; + r |= EMAC_MR1_RFS_16K; + gige = 1; + + if (dev->ndev->mtu > ETH_DATA_LEN) + r |= EMAC_MR1_JPSM; + break; + case SPEED_100: + r |= EMAC_MR1_MF_100; + /* Fall through */ + default: + r |= EMAC_MR1_RFS_4K; + gige = 0; + break; } - count = 0; - while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) - && (count++ < MDIO_DELAY)) - udelay(1); - MDIO_DEBUG((" (count was %d)\n", count)); + if (dev->rgmii_dev) + rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input, + dev->phy.speed); + else + zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed); - if ((stacr & EMAC_STACR_OC) == 0) { - printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name); - return -1; +#if !defined(CONFIG_40x) + /* on 40x erratum forces us to NOT use integrated flow control, + * let's hope it works on 44x ;) + */ + if (dev->phy.duplex == DUPLEX_FULL) { + if (dev->phy.pause) + r |= EMAC_MR1_EIFC | EMAC_MR1_APP; + else if (dev->phy.asym_pause) + r |= EMAC_MR1_APP; } +#endif + out_be32(&p->mr1, r); + + /* Set individual MAC address */ + out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); + out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | + (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | + ndev->dev_addr[5]); + + /* VLAN Tag Protocol ID */ + out_be32(&p->vtpid, 0x8100); + + /* Receive mode register */ + r = emac_iff2rmr(ndev); + if (r & EMAC_RMR_MAE) + emac_hash_mc(dev); + out_be32(&p->rmr, r); + + /* FIFOs thresholds */ + r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1, + EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE); + out_be32(&p->tmr1, r); + out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2)); + + /* PAUSE frame is sent when RX FIFO reaches its high-water mark, + there should be still enough space in FIFO to allow the our link + partner time to process this frame and also time to send PAUSE + frame itself. + + Here is the worst case scenario for the RX FIFO "headroom" + (from "The Switch Book") (100Mbps, without preamble, inter-frame gap): + + 1) One maximum-length frame on TX 1522 bytes + 2) One PAUSE frame time 64 bytes + 3) PAUSE frame decode time allowance 64 bytes + 4) One maximum-length frame on RX 1522 bytes + 5) Round-trip propagation delay of the link (100Mb) 15 bytes + ---------- + 3187 bytes + + I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes) + low-water mark to RX_FIFO_SIZE / 8 (512 bytes) + */ + r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE, + EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE); + out_be32(&p->rwmr, r); + + /* Set PAUSE timer to the maximum */ + out_be32(&p->ptr, 0xffff); + + /* IRQ sources */ + out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE | + EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE | + EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | + EMAC_ISR_IRE | EMAC_ISR_TE); + + /* We need to take GPCS PHY out of isolate mode after EMAC reset */ + if (emac_phy_gpcs(dev->phy.mode)) + mii_reset_phy(&dev->phy); + + return 0; +} - /* Clear the speed bits and make a read request to the PHY */ - stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ); - stacr |= ((mii_id & 0x1F) << 5); +/* BHs disabled */ +static void emac_reinitialize(struct ocp_enet_private *dev) +{ + DBG("%d: reinitialize" NL, dev->def->index); - out_be32(&emacp->em0stacr, stacr); + if (!emac_configure(dev)) { + emac_tx_enable(dev); + emac_rx_enable(dev); + } +} - count = 0; - while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) - && (count++ < MDIO_DELAY)) - udelay(1); - MDIO_DEBUG((" (count was %d)\n", count)); +/* BHs disabled */ +static void emac_full_tx_reset(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct ocp_func_emac_data *emacdata = dev->def->additions; - if ((stacr & EMAC_STACR_OC) == 0) { - printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name); - return -1; - } + DBG("%d: full_tx_reset" NL, dev->def->index); - /* Check for a read error */ - if (stacr & EMAC_STACR_PHYE) { - MDIO_DEBUG(("EMAC MDIO PHY error !\n")); - return -1; - } + emac_tx_disable(dev); + mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); + emac_clean_tx_ring(dev); + dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0; + + emac_configure(dev); - MDIO_DEBUG((" -> 0x%x\n", stacr >> 16)); + mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); + emac_tx_enable(dev); + emac_rx_enable(dev); - return (stacr >> 16); + netif_wake_queue(ndev); } -void emac_phy_write(struct net_device *dev, int mii_id, int reg, int data) +static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) { - int count; - uint32_t stacr; - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; + struct emac_regs *p = dev->emacp; + u32 r; + int n; - MDIO_DEBUG(("%s phy_write, id: 0x%x, reg: 0x%x, data: 0x%x\n", - dev->name, mii_id, reg, data)); + DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg); - /* Enable proper ZMII port */ - if (fep->zmii_dev) - emac_enable_zmii_port(fep->zmii_dev, fep->zmii_input); + /* Enable proper MDIO port */ + zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); - /* Use the EMAC that has the MDIO port */ - if (fep->mdio_dev) { - dev = fep->mdio_dev; - fep = dev->priv; - emacp = fep->emacp; + /* Wait for management interface to become idle */ + n = 10; + while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + udelay(1); + if (!--n) + goto to; } - count = 0; - while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) - && (count++ < MDIO_DELAY)) + /* Issue read command */ + out_be32(&p->stacr, + EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ | + (reg & EMAC_STACR_PRA_MASK) + | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)); + + /* Wait for read to complete */ + n = 100; + while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) { udelay(1); - MDIO_DEBUG((" (count was %d)\n", count)); + if (!--n) + goto to; + } - if ((stacr & EMAC_STACR_OC) == 0) { - printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name); - return; + if (unlikely(r & EMAC_STACR_PHYE)) { + DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index, + id, reg); + return -EREMOTEIO; } - /* Clear the speed bits and make a read request to the PHY */ + r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK); + DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r); + return r; + to: + DBG("%d: MII management interface timeout (read)" NL, dev->def->index); + return -ETIMEDOUT; +} + +static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, + u16 val) +{ + struct emac_regs *p = dev->emacp; + int n; - stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ); - stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16); + DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg, + val); - out_be32(&emacp->em0stacr, stacr); + /* Enable proper MDIO port */ + zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); - count = 0; - while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0) - && (count++ < MDIO_DELAY)) + /* Wait for management interface to be idle */ + n = 10; + while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { udelay(1); - MDIO_DEBUG((" (count was %d)\n", count)); + if (!--n) + goto to; + } - if ((stacr & EMAC_STACR_OC) == 0) - printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name); + /* Issue write command */ + out_be32(&p->stacr, + EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE | + (reg & EMAC_STACR_PRA_MASK) | + ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | + (val << EMAC_STACR_PHYD_SHIFT)); - /* Check for a write error */ - if ((stacr & EMAC_STACR_PHYE) != 0) { - MDIO_DEBUG(("EMAC MDIO PHY error !\n")); + /* Wait for write to complete */ + n = 100; + while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) { + udelay(1); + if (!--n) + goto to; } + return; + to: + DBG("%d: MII management interface timeout (write)" NL, dev->def->index); } -static void emac_txeob_dev(void *param, u32 chanmask) +static int emac_mdio_read(struct net_device *ndev, int id, int reg) { - struct net_device *dev = param; - struct ocp_enet_private *fep = dev->priv; - unsigned long flags; - - spin_lock_irqsave(&fep->lock, flags); - - PKT_DEBUG(("emac_txeob_dev() entry, tx_cnt: %d\n", fep->tx_cnt)); - - while (fep->tx_cnt && - !(fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_READY)) { + struct ocp_enet_private *dev = ndev->priv; + int res; + + local_bh_disable(); + res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, + (u8) reg); + local_bh_enable(); + return res; +} - if (fep->tx_desc[fep->ack_slot].ctrl & MAL_TX_CTRL_LAST) { - /* Tell the system the transmit completed. */ - dma_unmap_single(&fep->ocpdev->dev, - fep->tx_desc[fep->ack_slot].data_ptr, - fep->tx_desc[fep->ack_slot].data_len, - DMA_TO_DEVICE); - dev_kfree_skb_irq(fep->tx_skb[fep->ack_slot]); +static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) +{ + struct ocp_enet_private *dev = ndev->priv; - if (fep->tx_desc[fep->ack_slot].ctrl & - (EMAC_TX_ST_EC | EMAC_TX_ST_MC | EMAC_TX_ST_SC)) - fep->stats.collisions++; - } + local_bh_disable(); + __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, + (u8) reg, (u16) val); + local_bh_enable(); +} - fep->tx_skb[fep->ack_slot] = (struct sk_buff *)NULL; - if (++fep->ack_slot == NUM_TX_BUFF) - fep->ack_slot = 0; +/* BHs disabled */ +static void emac_set_multicast_list(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct emac_regs *p = dev->emacp; + u32 rmr = emac_iff2rmr(ndev); + + DBG("%d: multicast %08x" NL, dev->def->index, rmr); + BUG_ON(!netif_running(dev->ndev)); + + /* I decided to relax register access rules here to avoid + * full EMAC reset. + * + * There is a real problem with EMAC4 core if we use MWSW_001 bit + * in MR1 register and do a full EMAC reset. + * One TX BD status update is delayed and, after EMAC reset, it + * never happens, resulting in TX hung (it'll be recovered by TX + * timeout handler eventually, but this is just gross). + * So we either have to do full TX reset or try to cheat here :) + * + * The only required change is to RX mode register, so I *think* all + * we need is just to stop RX channel. This seems to work on all + * tested SoCs. --ebs + */ + emac_rx_disable(dev); + if (rmr & EMAC_RMR_MAE) + emac_hash_mc(dev); + out_be32(&p->rmr, rmr); + emac_rx_enable(dev); +} - fep->tx_cnt--; +/* BHs disabled */ +static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu) +{ + struct ocp_func_emac_data *emacdata = dev->def->additions; + int rx_sync_size = emac_rx_sync_size(new_mtu); + int rx_skb_size = emac_rx_skb_size(new_mtu); + int i, ret = 0; + + emac_rx_disable(dev); + mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); + + if (dev->rx_sg_skb) { + ++dev->estats.rx_dropped_resize; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; } - if (fep->tx_cnt < NUM_TX_BUFF) - netif_wake_queue(dev); - PKT_DEBUG(("emac_txeob_dev() exit, tx_cnt: %d\n", fep->tx_cnt)); + /* Make a first pass over RX ring and mark BDs ready, dropping + * non-processed packets on the way. We need this as a separate pass + * to simplify error recovery in the case of allocation failure later. + */ + for (i = 0; i < NUM_RX_BUFF; ++i) { + if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST) + ++dev->estats.rx_dropped_resize; - spin_unlock_irqrestore(&fep->lock, flags); -} + dev->rx_desc[i].data_len = 0; + dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | + (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); + } -/* - Fill/Re-fill the rx chain with valid ctrl/ptrs. - This function will fill from rx_slot up to the parm end. - So to completely fill the chain pre-set rx_slot to 0 and - pass in an end of 0. - */ -static void emac_rx_fill(struct net_device *dev, int end) -{ - int i; - struct ocp_enet_private *fep = dev->priv; - - i = fep->rx_slot; - do { - /* We don't want the 16 bytes skb_reserve done by dev_alloc_skb, - * it breaks our cache line alignement. However, we still allocate - * +16 so that we end up allocating the exact same size as - * dev_alloc_skb() would do. - * Also, because of the skb_res, the max DMA size we give to EMAC - * is slighly wrong, causing it to potentially DMA 2 more bytes - * from a broken/oversized packet. These 16 bytes will take care - * that we don't walk on somebody else toes with that. - */ - fep->rx_skb[i] = - alloc_skb(fep->rx_buffer_size + 16, GFP_ATOMIC); - - if (fep->rx_skb[i] == NULL) { - /* Keep rx_slot here, the next time clean/fill is called - * we will try again before the MAL wraps back here - * If the MAL tries to use this descriptor with - * the EMPTY bit off it will cause the - * rxde interrupt. That is where we will - * try again to allocate an sk_buff. - */ - break; + /* Reallocate RX ring only if bigger skb buffers are required */ + if (rx_skb_size <= dev->rx_skb_size) + goto skip; + /* Second pass, allocate new skbs */ + for (i = 0; i < NUM_RX_BUFF; ++i) { + struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC); + if (!skb) { + ret = -ENOMEM; + goto oom; } - if (skb_res) - skb_reserve(fep->rx_skb[i], skb_res); + BUG_ON(!dev->rx_skb[i]); + dev_kfree_skb(dev->rx_skb[i]); - /* We must NOT dma_map_single the cache line right after the - * buffer, so we must crop our sync size to account for the - * reserved space - */ - fep->rx_desc[i].data_ptr = - (unsigned char *)dma_map_single(&fep->ocpdev->dev, - (void *)fep->rx_skb[i]-> - data, - fep->rx_buffer_size - - skb_res, DMA_FROM_DEVICE); - - /* - * Some 4xx implementations use the previously - * reserved bits in data_len to encode the MS - * 4-bits of a 36-bit physical address (ERPN) - * This must be initialized. - */ - fep->rx_desc[i].data_len = 0; - fep->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR | - (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); + skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); + dev->rx_desc[i].data_ptr = + dma_map_single(dev->ldev, skb->data - 2, rx_sync_size, + DMA_FROM_DEVICE) + 2; + dev->rx_skb[i] = skb; + } + skip: + /* Check if we need to change "Jumbo" bit in MR1 */ + if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) { + /* This is to prevent starting RX channel in emac_rx_enable() */ + dev->commac.rx_stopped = 1; + + dev->ndev->mtu = new_mtu; + emac_full_tx_reset(dev->ndev); + } - } while ((i = (i + 1) % NUM_RX_BUFF) != end); + mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu)); + oom: + /* Restart RX */ + dev->commac.rx_stopped = dev->rx_slot = 0; + mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); + emac_rx_enable(dev); - fep->rx_slot = i; + return ret; } -static void -emac_rx_csum(struct net_device *dev, unsigned short ctrl, struct sk_buff *skb) +/* Process ctx, rtnl_lock semaphore */ +static int emac_change_mtu(struct net_device *ndev, int new_mtu) { - struct ocp_enet_private *fep = dev->priv; + struct ocp_enet_private *dev = ndev->priv; + int ret = 0; - /* Exit if interface has no TAH engine */ - if (!fep->tah_dev) { - skb->ip_summed = CHECKSUM_NONE; - return; - } + if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU) + return -EINVAL; - /* Check for TCP/UDP/IP csum error */ - if (ctrl & EMAC_CSUM_VER_ERROR) { - /* Let the stack verify checksum errors */ - skb->ip_summed = CHECKSUM_NONE; -/* adapter->hw_csum_err++; */ - } else { - /* Csum is good */ - skb->ip_summed = CHECKSUM_UNNECESSARY; -/* adapter->hw_csum_good++; */ - } -} + DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu); -static int emac_rx_clean(struct net_device *dev) -{ - int i, b, bnum = 0, buf[6]; - int error, frame_length; - struct ocp_enet_private *fep = dev->priv; - unsigned short ctrl; + local_bh_disable(); + if (netif_running(ndev)) { + /* Check if we really need to reinitalize RX ring */ + if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) + ret = emac_resize_rx_ring(dev, new_mtu); + } - i = fep->rx_slot; + if (!ret) { + ndev->mtu = new_mtu; + dev->rx_skb_size = emac_rx_skb_size(new_mtu); + dev->rx_sync_size = emac_rx_sync_size(new_mtu); + } + local_bh_enable(); - PKT_DEBUG(("emac_rx_clean() entry, rx_slot: %d\n", fep->rx_slot)); + return ret; +} - do { - if (fep->rx_skb[i] == NULL) - continue; /*we have already handled the packet but haved failed to alloc */ - /* - since rx_desc is in uncached mem we don't keep reading it directly - we pull out a local copy of ctrl and do the checks on the copy. - */ - ctrl = fep->rx_desc[i].ctrl; - if (ctrl & MAL_RX_CTRL_EMPTY) - break; /*we don't have any more ready packets */ - - if (EMAC_IS_BAD_RX_PACKET(ctrl)) { - fep->stats.rx_errors++; - fep->stats.rx_dropped++; - - if (ctrl & EMAC_RX_ST_OE) - fep->stats.rx_fifo_errors++; - if (ctrl & EMAC_RX_ST_AE) - fep->stats.rx_frame_errors++; - if (ctrl & EMAC_RX_ST_BFCS) - fep->stats.rx_crc_errors++; - if (ctrl & (EMAC_RX_ST_RP | EMAC_RX_ST_PTL | - EMAC_RX_ST_ORE | EMAC_RX_ST_IRE)) - fep->stats.rx_length_errors++; - } else { - if ((ctrl & (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) == - (MAL_RX_CTRL_FIRST | MAL_RX_CTRL_LAST)) { - /* Single descriptor packet */ - emac_rx_csum(dev, ctrl, fep->rx_skb[i]); - /* Send the skb up the chain. */ - frame_length = fep->rx_desc[i].data_len - 4; - skb_put(fep->rx_skb[i], frame_length); - fep->rx_skb[i]->dev = dev; - fep->rx_skb[i]->protocol = - eth_type_trans(fep->rx_skb[i], dev); - error = netif_rx(fep->rx_skb[i]); - - if ((error == NET_RX_DROP) || - (error == NET_RX_BAD)) { - fep->stats.rx_dropped++; - } else { - fep->stats.rx_packets++; - fep->stats.rx_bytes += frame_length; - } - fep->rx_skb[i] = NULL; - } else { - /* Multiple descriptor packet */ - if (ctrl & MAL_RX_CTRL_FIRST) { - if (fep->rx_desc[(i + 1) % NUM_RX_BUFF]. - ctrl & MAL_RX_CTRL_EMPTY) - break; - bnum = 0; - buf[bnum] = i; - ++bnum; - continue; - } - if (((ctrl & MAL_RX_CTRL_FIRST) != - MAL_RX_CTRL_FIRST) && - ((ctrl & MAL_RX_CTRL_LAST) != - MAL_RX_CTRL_LAST)) { - if (fep->rx_desc[(i + 1) % - NUM_RX_BUFF].ctrl & - MAL_RX_CTRL_EMPTY) { - i = buf[0]; - break; - } - buf[bnum] = i; - ++bnum; - continue; - } - if (ctrl & MAL_RX_CTRL_LAST) { - buf[bnum] = i; - ++bnum; - skb_put(fep->rx_skb[buf[0]], - fep->rx_desc[buf[0]].data_len); - for (b = 1; b < bnum; b++) { - /* - * MAL is braindead, we need - * to copy the remainder - * of the packet from the - * latter descriptor buffers - * to the first skb. Then - * dispose of the source - * skbs. - * - * Once the stack is fixed - * to handle frags on most - * protocols we can generate - * a fragmented skb with - * no copies. - */ - memcpy(fep->rx_skb[buf[0]]-> - data + - fep->rx_skb[buf[0]]->len, - fep->rx_skb[buf[b]]-> - data, - fep->rx_desc[buf[b]]. - data_len); - skb_put(fep->rx_skb[buf[0]], - fep->rx_desc[buf[b]]. - data_len); - dma_unmap_single(&fep->ocpdev-> - dev, - fep-> - rx_desc[buf - [b]]. - data_ptr, - fep-> - rx_desc[buf - [b]]. - data_len, - DMA_FROM_DEVICE); - dev_kfree_skb(fep-> - rx_skb[buf[b]]); - } - emac_rx_csum(dev, ctrl, - fep->rx_skb[buf[0]]); - - fep->rx_skb[buf[0]]->dev = dev; - fep->rx_skb[buf[0]]->protocol = - eth_type_trans(fep->rx_skb[buf[0]], - dev); - error = netif_rx(fep->rx_skb[buf[0]]); - - if ((error == NET_RX_DROP) - || (error == NET_RX_BAD)) { - fep->stats.rx_dropped++; - } else { - fep->stats.rx_packets++; - fep->stats.rx_bytes += - fep->rx_skb[buf[0]]->len; - } - for (b = 0; b < bnum; b++) - fep->rx_skb[buf[b]] = NULL; - } - } +static void emac_clean_tx_ring(struct ocp_enet_private *dev) +{ + int i; + for (i = 0; i < NUM_TX_BUFF; ++i) { + if (dev->tx_skb[i]) { + dev_kfree_skb(dev->tx_skb[i]); + dev->tx_skb[i] = NULL; + if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY) + ++dev->estats.tx_dropped; } - } while ((i = (i + 1) % NUM_RX_BUFF) != fep->rx_slot); - - PKT_DEBUG(("emac_rx_clean() exit, rx_slot: %d\n", fep->rx_slot)); - - return i; + dev->tx_desc[i].ctrl = 0; + dev->tx_desc[i].data_ptr = 0; + } } -static void emac_rxeob_dev(void *param, u32 chanmask) +static void emac_clean_rx_ring(struct ocp_enet_private *dev) { - struct net_device *dev = param; - struct ocp_enet_private *fep = dev->priv; - unsigned long flags; - int n; + int i; + for (i = 0; i < NUM_RX_BUFF; ++i) + if (dev->rx_skb[i]) { + dev->rx_desc[i].ctrl = 0; + dev_kfree_skb(dev->rx_skb[i]); + dev->rx_skb[i] = NULL; + dev->rx_desc[i].data_ptr = 0; + } - spin_lock_irqsave(&fep->lock, flags); - if ((n = emac_rx_clean(dev)) != fep->rx_slot) - emac_rx_fill(dev, n); - spin_unlock_irqrestore(&fep->lock, flags); + if (dev->rx_sg_skb) { + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } } -/* - * This interrupt should never occurr, we don't program - * the MAL for contiunous mode. - */ -static void emac_txde_dev(void *param, u32 chanmask) +static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot, + int flags) { - struct net_device *dev = param; - struct ocp_enet_private *fep = dev->priv; + struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags); + if (unlikely(!skb)) + return -ENOMEM; - printk(KERN_WARNING "%s: transmit descriptor error\n", dev->name); + dev->rx_skb[slot] = skb; + dev->rx_desc[slot].data_len = 0; - emac_mac_dump(dev); - emac_mal_dump(dev); + skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); + dev->rx_desc[slot].data_ptr = + dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size, + DMA_FROM_DEVICE) + 2; + barrier(); + dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | + (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); - /* Reenable the transmit channel */ - mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); + return 0; } -/* - * This interrupt should be very rare at best. This occurs when - * the hardware has a problem with the receive descriptors. The manual - * states that it occurs when the hardware cannot the receive descriptor - * empty bit is not set. The recovery mechanism will be to - * traverse through the descriptors, handle any that are marked to be - * handled and reinitialize each along the way. At that point the driver - * will be restarted. - */ -static void emac_rxde_dev(void *param, u32 chanmask) +static void emac_print_link_status(struct ocp_enet_private *dev) { - struct net_device *dev = param; - struct ocp_enet_private *fep = dev->priv; - unsigned long flags; - - if (net_ratelimit()) { - printk(KERN_WARNING "%s: receive descriptor error\n", - fep->ndev->name); + if (netif_carrier_ok(dev->ndev)) + printk(KERN_INFO "%s: link is up, %d %s%s\n", + dev->ndev->name, dev->phy.speed, + dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX", + dev->phy.pause ? ", pause enabled" : + dev->phy.asym_pause ? ", assymetric pause enabled" : ""); + else + printk(KERN_INFO "%s: link is down\n", dev->ndev->name); +} - emac_mac_dump(dev); - emac_mal_dump(dev); - emac_desc_dump(dev); +/* Process ctx, rtnl_lock semaphore */ +static int emac_open(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct ocp_func_emac_data *emacdata = dev->def->additions; + int err, i; + + DBG("%d: open" NL, dev->def->index); + + /* Setup error IRQ handler */ + err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev); + if (err) { + printk(KERN_ERR "%s: failed to request IRQ %d\n", + ndev->name, dev->def->irq); + return err; } - /* Disable RX channel */ - spin_lock_irqsave(&fep->lock, flags); - mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - - /* For now, charge the error against all emacs */ - fep->stats.rx_errors++; - - /* so do we have any good packets still? */ - emac_rx_clean(dev); - - /* When the interface is restarted it resets processing to the - * first descriptor in the table. - */ - - fep->rx_slot = 0; - emac_rx_fill(dev, 0); + /* Allocate RX ring */ + for (i = 0; i < NUM_RX_BUFF; ++i) + if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) { + printk(KERN_ERR "%s: failed to allocate RX ring\n", + ndev->name); + goto oom; + } - set_mal_dcrn(fep->mal, DCRN_MALRXEOBISR, fep->commac.rx_chan_mask); - set_mal_dcrn(fep->mal, DCRN_MALRXDEIR, fep->commac.rx_chan_mask); + local_bh_disable(); + dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = + dev->commac.rx_stopped = 0; + dev->rx_sg_skb = NULL; + + if (dev->phy.address >= 0) { + int link_poll_interval; + if (dev->phy.def->ops->poll_link(&dev->phy)) { + dev->phy.def->ops->read_link(&dev->phy); + EMAC_RX_CLK_DEFAULT(dev->def->index); + netif_carrier_on(dev->ndev); + link_poll_interval = PHY_POLL_LINK_ON; + } else { + EMAC_RX_CLK_TX(dev->def->index); + netif_carrier_off(dev->ndev); + link_poll_interval = PHY_POLL_LINK_OFF; + } + mod_timer(&dev->link_timer, jiffies + link_poll_interval); + emac_print_link_status(dev); + } else + netif_carrier_on(dev->ndev); + + emac_configure(dev); + mal_poll_add(dev->mal, &dev->commac); + mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); + mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu)); + mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); + emac_tx_enable(dev); + emac_rx_enable(dev); + netif_start_queue(ndev); + local_bh_enable(); - /* Reenable the receive channels */ - mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - spin_unlock_irqrestore(&fep->lock, flags); + return 0; + oom: + emac_clean_rx_ring(dev); + free_irq(dev->def->irq, dev); + return -ENOMEM; } -static irqreturn_t -emac_mac_irq(int irq, void *dev_instance, struct pt_regs *regs) +/* BHs disabled */ +static int emac_link_differs(struct ocp_enet_private *dev) { - struct net_device *dev = dev_instance; - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; - unsigned long tmp_em0isr; + u32 r = in_be32(&dev->emacp->mr1); - /* EMAC interrupt */ - tmp_em0isr = in_be32(&emacp->em0isr); - if (tmp_em0isr & (EMAC_ISR_TE0 | EMAC_ISR_TE1)) { - /* This error is a hard transmit error - could retransmit */ - fep->stats.tx_errors++; + int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; + int speed, pause, asym_pause; - /* Reenable the transmit channel */ - mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); + if (r & (EMAC_MR1_MF_1000 | EMAC_MR1_MF_1000GPCS)) + speed = SPEED_1000; + else if (r & EMAC_MR1_MF_100) + speed = SPEED_100; + else + speed = SPEED_10; - } else { - fep->stats.rx_errors++; + switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) { + case (EMAC_MR1_EIFC | EMAC_MR1_APP): + pause = 1; + asym_pause = 0; + break; + case EMAC_MR1_APP: + pause = 0; + asym_pause = 1; + break; + default: + pause = asym_pause = 0; } - - if (tmp_em0isr & EMAC_ISR_RP) - fep->stats.rx_length_errors++; - if (tmp_em0isr & EMAC_ISR_ALE) - fep->stats.rx_frame_errors++; - if (tmp_em0isr & EMAC_ISR_BFCS) - fep->stats.rx_crc_errors++; - if (tmp_em0isr & EMAC_ISR_PTLE) - fep->stats.rx_length_errors++; - if (tmp_em0isr & EMAC_ISR_ORE) - fep->stats.rx_length_errors++; - if (tmp_em0isr & EMAC_ISR_TE0) - fep->stats.tx_aborted_errors++; - - emac_err_dump(dev, tmp_em0isr); - - out_be32(&emacp->em0isr, tmp_em0isr); - - return IRQ_HANDLED; + return speed != dev->phy.speed || duplex != dev->phy.duplex || + pause != dev->phy.pause || asym_pause != dev->phy.asym_pause; } -static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev) +/* BHs disabled */ +static void emac_link_timer(unsigned long data) { - unsigned short ctrl; - unsigned long flags; - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; - int len = skb->len; - unsigned int offset = 0, size, f, tx_slot_first; - unsigned int nr_frags = skb_shinfo(skb)->nr_frags; - - spin_lock_irqsave(&fep->lock, flags); - - len -= skb->data_len; + struct ocp_enet_private *dev = (struct ocp_enet_private *)data; + int link_poll_interval; - if ((fep->tx_cnt + nr_frags + len / DESC_BUF_SIZE + 1) > NUM_TX_BUFF) { - PKT_DEBUG(("emac_start_xmit() stopping queue\n")); - netif_stop_queue(dev); - spin_unlock_irqrestore(&fep->lock, flags); - return -EBUSY; - } + DBG2("%d: link timer" NL, dev->def->index); - tx_slot_first = fep->tx_slot; + if (dev->phy.def->ops->poll_link(&dev->phy)) { + if (!netif_carrier_ok(dev->ndev)) { + EMAC_RX_CLK_DEFAULT(dev->def->index); - while (len) { - size = min(len, DESC_BUF_SIZE); + /* Get new link parameters */ + dev->phy.def->ops->read_link(&dev->phy); - fep->tx_desc[fep->tx_slot].data_len = (short)size; - fep->tx_desc[fep->tx_slot].data_ptr = - (unsigned char *)dma_map_single(&fep->ocpdev->dev, - (void *)((unsigned int)skb-> - data + offset), - size, DMA_TO_DEVICE); + if (dev->tah_dev || emac_link_differs(dev)) + emac_full_tx_reset(dev->ndev); - ctrl = EMAC_TX_CTRL_DFLT; - if (fep->tx_slot != tx_slot_first) - ctrl |= MAL_TX_CTRL_READY; - if ((NUM_TX_BUFF - 1) == fep->tx_slot) - ctrl |= MAL_TX_CTRL_WRAP; - if (!nr_frags && (len == size)) { - ctrl |= MAL_TX_CTRL_LAST; - fep->tx_skb[fep->tx_slot] = skb; + netif_carrier_on(dev->ndev); + emac_print_link_status(dev); + } + link_poll_interval = PHY_POLL_LINK_ON; + } else { + if (netif_carrier_ok(dev->ndev)) { + EMAC_RX_CLK_TX(dev->def->index); +#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) + emac_reinitialize(dev); +#endif + netif_carrier_off(dev->ndev); + emac_print_link_status(dev); } - if (skb->ip_summed == CHECKSUM_HW) - ctrl |= EMAC_TX_CTRL_TAH_CSUM; - - fep->tx_desc[fep->tx_slot].ctrl = ctrl; - - len -= size; - offset += size; - /* Bump tx count */ - if (++fep->tx_cnt == NUM_TX_BUFF) - netif_stop_queue(dev); + /* Retry reset if the previous attempt failed. + * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX + * case, but I left it here because it shouldn't trigger for + * sane PHYs anyway. + */ + if (unlikely(dev->reset_failed)) + emac_reinitialize(dev); - /* Next descriptor */ - if (++fep->tx_slot == NUM_TX_BUFF) - fep->tx_slot = 0; + link_poll_interval = PHY_POLL_LINK_OFF; } + mod_timer(&dev->link_timer, jiffies + link_poll_interval); +} - for (f = 0; f < nr_frags; f++) { - struct skb_frag_struct *frag; - - frag = &skb_shinfo(skb)->frags[f]; - len = frag->size; - offset = 0; - - while (len) { - size = min(len, DESC_BUF_SIZE); - - dma_map_page(&fep->ocpdev->dev, - frag->page, - frag->page_offset + offset, - size, DMA_TO_DEVICE); - - ctrl = EMAC_TX_CTRL_DFLT | MAL_TX_CTRL_READY; - if ((NUM_TX_BUFF - 1) == fep->tx_slot) - ctrl |= MAL_TX_CTRL_WRAP; - if ((f == (nr_frags - 1)) && (len == size)) { - ctrl |= MAL_TX_CTRL_LAST; - fep->tx_skb[fep->tx_slot] = skb; - } - - if (skb->ip_summed == CHECKSUM_HW) - ctrl |= EMAC_TX_CTRL_TAH_CSUM; - - fep->tx_desc[fep->tx_slot].data_len = (short)size; - fep->tx_desc[fep->tx_slot].data_ptr = - (char *)((page_to_pfn(frag->page) << PAGE_SHIFT) + - frag->page_offset + offset); - fep->tx_desc[fep->tx_slot].ctrl = ctrl; - - len -= size; - offset += size; - - /* Bump tx count */ - if (++fep->tx_cnt == NUM_TX_BUFF) - netif_stop_queue(dev); +/* BHs disabled */ +static void emac_force_link_update(struct ocp_enet_private *dev) +{ + netif_carrier_off(dev->ndev); + if (timer_pending(&dev->link_timer)) + mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF); +} - /* Next descriptor */ - if (++fep->tx_slot == NUM_TX_BUFF) - fep->tx_slot = 0; - } - } +/* Process ctx, rtnl_lock semaphore */ +static int emac_close(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct ocp_func_emac_data *emacdata = dev->def->additions; - /* - * Deferred set READY on first descriptor of packet to - * avoid TX MAL race. - */ - fep->tx_desc[tx_slot_first].ctrl |= MAL_TX_CTRL_READY; + DBG("%d: close" NL, dev->def->index); - /* Send the packet out. */ - out_be32(&emacp->em0tmr0, EMAC_TMR0_XMIT); + local_bh_disable(); - fep->stats.tx_packets++; - fep->stats.tx_bytes += skb->len; + if (dev->phy.address >= 0) + del_timer_sync(&dev->link_timer); - PKT_DEBUG(("emac_start_xmit() exitn")); + netif_stop_queue(ndev); + emac_rx_disable(dev); + emac_tx_disable(dev); + mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); + mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); + mal_poll_del(dev->mal, &dev->commac); + local_bh_enable(); - spin_unlock_irqrestore(&fep->lock, flags); + emac_clean_tx_ring(dev); + emac_clean_rx_ring(dev); + free_irq(dev->def->irq, dev); return 0; } -static int emac_adjust_to_link(struct ocp_enet_private *fep) +static inline u16 emac_tx_csum(struct ocp_enet_private *dev, + struct sk_buff *skb) { - emac_t *emacp = fep->emacp; - unsigned long mode_reg; - int full_duplex, speed; - - full_duplex = 0; - speed = SPEED_10; - - /* set mode register 1 defaults */ - mode_reg = EMAC_M1_DEFAULT; - - /* Read link mode on PHY */ - if (fep->phy_mii.def->ops->read_link(&fep->phy_mii) == 0) { - /* If an error occurred, we don't deal with it yet */ - full_duplex = (fep->phy_mii.duplex == DUPLEX_FULL); - speed = fep->phy_mii.speed; +#if defined(CONFIG_IBM_EMAC_TAH) + if (skb->ip_summed == CHECKSUM_HW) { + ++dev->stats.tx_packets_csum; + return EMAC_TX_CTRL_TAH_CSUM; } +#endif + return 0; +} +static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len) +{ + struct emac_regs *p = dev->emacp; + struct net_device *ndev = dev->ndev; - /* set speed (default is 10Mb) */ - switch (speed) { - case SPEED_1000: - mode_reg |= EMAC_M1_RFS_16K; - if (fep->rgmii_dev) { - struct ibm_ocp_rgmii *rgmii = RGMII_PRIV(fep->rgmii_dev); - - if ((rgmii->mode[fep->rgmii_input] == RTBI) - || (rgmii->mode[fep->rgmii_input] == TBI)) - mode_reg |= EMAC_M1_MF_1000GPCS; - else - mode_reg |= EMAC_M1_MF_1000MBPS; - - emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, - 1000); - } - break; - case SPEED_100: - mode_reg |= EMAC_M1_MF_100MBPS | EMAC_M1_RFS_4K; - if (fep->rgmii_dev) - emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, - 100); - if (fep->zmii_dev) - emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input, - 100); - break; - case SPEED_10: - default: - mode_reg = (mode_reg & ~EMAC_M1_MF_100MBPS) | EMAC_M1_RFS_4K; - if (fep->rgmii_dev) - emac_rgmii_port_speed(fep->rgmii_dev, fep->rgmii_input, - 10); - if (fep->zmii_dev) - emac_zmii_port_speed(fep->zmii_dev, fep->zmii_input, - 10); - } - - if (full_duplex) - mode_reg |= EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_IST; - else - mode_reg &= ~(EMAC_M1_FDE | EMAC_M1_EIFC | EMAC_M1_ILE); + /* Send the packet out */ + out_be32(&p->tmr0, EMAC_TMR0_XMIT); - LINK_DEBUG(("%s: adjust to link, speed: %d, duplex: %d, opened: %d\n", - fep->ndev->name, speed, full_duplex, fep->opened)); + if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) { + netif_stop_queue(ndev); + DBG2("%d: stopped TX queue" NL, dev->def->index); + } - printk(KERN_INFO "%s: Speed: %d, %s duplex.\n", - fep->ndev->name, speed, full_duplex ? "Full" : "Half"); - if (fep->opened) - out_be32(&emacp->em0mr1, mode_reg); + ndev->trans_start = jiffies; + ++dev->stats.tx_packets; + dev->stats.tx_bytes += len; return 0; } -static int emac_set_mac_address(struct net_device *ndev, void *p) +/* BHs disabled */ +static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev) { - struct ocp_enet_private *fep = ndev->priv; - emac_t *emacp = fep->emacp; - struct sockaddr *addr = p; + struct ocp_enet_private *dev = ndev->priv; + unsigned int len = skb->len; + int slot; - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; + u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | + MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb); - memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + slot = dev->tx_slot++; + if (dev->tx_slot == NUM_TX_BUFF) { + dev->tx_slot = 0; + ctrl |= MAL_TX_CTRL_WRAP; + } - /* set the high address */ - out_be32(&emacp->em0iahr, - (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]); + DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot); - /* set the low address */ - out_be32(&emacp->em0ialr, - (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16) - | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]); + dev->tx_skb[slot] = skb; + dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len, + DMA_TO_DEVICE); + dev->tx_desc[slot].data_len = (u16) len; + barrier(); + dev->tx_desc[slot].ctrl = ctrl; - return 0; + return emac_xmit_finish(dev, len); } -static int emac_change_mtu(struct net_device *dev, int new_mtu) +#if defined(CONFIG_IBM_EMAC_TAH) +static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot, + u32 pd, int len, int last, u16 base_ctrl) { - struct ocp_enet_private *fep = dev->priv; - int old_mtu = dev->mtu; - unsigned long mode_reg; - emac_t *emacp = fep->emacp; - u32 em0mr0; - int i, full; - unsigned long flags; - - if ((new_mtu < EMAC_MIN_MTU) || (new_mtu > EMAC_MAX_MTU)) { - printk(KERN_ERR - "emac: Invalid MTU setting, MTU must be between %d and %d\n", - EMAC_MIN_MTU, EMAC_MAX_MTU); - return -EINVAL; - } + while (1) { + u16 ctrl = base_ctrl; + int chunk = min(len, MAL_MAX_TX_SIZE); + len -= chunk; - if (old_mtu != new_mtu && netif_running(dev)) { - /* Stop rx engine */ - em0mr0 = in_be32(&emacp->em0mr0); - out_be32(&emacp->em0mr0, em0mr0 & ~EMAC_M0_RXE); - - /* Wait for descriptors to be empty */ - do { - full = 0; - for (i = 0; i < NUM_RX_BUFF; i++) - if (!(fep->rx_desc[i].ctrl & MAL_RX_CTRL_EMPTY)) { - printk(KERN_NOTICE - "emac: RX ring is still full\n"); - full = 1; - } - } while (full); - - spin_lock_irqsave(&fep->lock, flags); - - mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - - /* Destroy all old rx skbs */ - for (i = 0; i < NUM_RX_BUFF; i++) { - dma_unmap_single(&fep->ocpdev->dev, - fep->rx_desc[i].data_ptr, - fep->rx_desc[i].data_len, - DMA_FROM_DEVICE); - dev_kfree_skb(fep->rx_skb[i]); - fep->rx_skb[i] = NULL; - } + slot = (slot + 1) % NUM_TX_BUFF; - /* Set new rx_buffer_size, jumbo cap, and advertise new mtu */ - mode_reg = in_be32(&emacp->em0mr1); - if (new_mtu > ENET_DEF_MTU_SIZE) { - mode_reg |= EMAC_M1_JUMBO_ENABLE; - fep->rx_buffer_size = EMAC_MAX_FRAME; - } else { - mode_reg &= ~EMAC_M1_JUMBO_ENABLE; - fep->rx_buffer_size = ENET_DEF_BUF_SIZE; - } - dev->mtu = new_mtu; - out_be32(&emacp->em0mr1, mode_reg); + if (last && !len) + ctrl |= MAL_TX_CTRL_LAST; + if (slot == NUM_TX_BUFF - 1) + ctrl |= MAL_TX_CTRL_WRAP; - /* Re-init rx skbs */ - fep->rx_slot = 0; - emac_rx_fill(dev, 0); + dev->tx_skb[slot] = NULL; + dev->tx_desc[slot].data_ptr = pd; + dev->tx_desc[slot].data_len = (u16) chunk; + dev->tx_desc[slot].ctrl = ctrl; + ++dev->tx_cnt; - /* Restart the rx engine */ - mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - out_be32(&emacp->em0mr0, em0mr0 | EMAC_M0_RXE); + if (!len) + break; - spin_unlock_irqrestore(&fep->lock, flags); + pd += chunk; } - - return 0; + return slot; } -static void __emac_set_multicast_list(struct net_device *dev) +/* BHs disabled (SG version for TAH equipped EMACs) */ +static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev) { - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; - u32 rmr = in_be32(&emacp->em0rmr); - - /* First clear all special bits, they can be set later */ - rmr &= ~(EMAC_RMR_PME | EMAC_RMR_PMME | EMAC_RMR_MAE); + struct ocp_enet_private *dev = ndev->priv; + int nr_frags = skb_shinfo(skb)->nr_frags; + int len = skb->len, chunk; + int slot, i; + u16 ctrl; + u32 pd; - if (dev->flags & IFF_PROMISC) { - rmr |= EMAC_RMR_PME; - } else if (dev->flags & IFF_ALLMULTI || 32 < dev->mc_count) { - /* - * Must be setting up to use multicast - * Now check for promiscuous multicast - */ - rmr |= EMAC_RMR_PMME; - } else if (dev->flags & IFF_MULTICAST && 0 < dev->mc_count) { - unsigned short em0gaht[4] = { 0, 0, 0, 0 }; - struct dev_mc_list *dmi; - - /* Need to hash on the multicast address. */ - for (dmi = dev->mc_list; dmi; dmi = dmi->next) { - unsigned long mc_crc; - unsigned int bit_number; - - mc_crc = ether_crc(6, (char *)dmi->dmi_addr); - bit_number = 63 - (mc_crc >> 26); /* MSB: 0 LSB: 63 */ - em0gaht[bit_number >> 4] |= - 0x8000 >> (bit_number & 0x0f); - } - emacp->em0gaht1 = em0gaht[0]; - emacp->em0gaht2 = em0gaht[1]; - emacp->em0gaht3 = em0gaht[2]; - emacp->em0gaht4 = em0gaht[3]; + /* This is common "fast" path */ + if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE)) + return emac_start_xmit(skb, ndev); - /* Turn on multicast addressing */ - rmr |= EMAC_RMR_MAE; - } - out_be32(&emacp->em0rmr, rmr); -} + len -= skb->data_len; -static int emac_init_tah(struct ocp_enet_private *fep) -{ - tah_t *tahp; + /* Note, this is only an *estimation*, we can still run out of empty + * slots because of the additional fragmentation into + * MAL_MAX_TX_SIZE-sized chunks + */ + if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF)) + goto stop_queue; + + ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | + emac_tx_csum(dev, skb); + slot = dev->tx_slot; + + /* skb data */ + dev->tx_skb[slot] = NULL; + chunk = min(len, MAL_MAX_TX_SIZE); + dev->tx_desc[slot].data_ptr = pd = + dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE); + dev->tx_desc[slot].data_len = (u16) chunk; + len -= chunk; + if (unlikely(len)) + slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags, + ctrl); + /* skb fragments */ + for (i = 0; i < nr_frags; ++i) { + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; + len = frag->size; - /* Initialize TAH and enable checksum verification */ - tahp = (tah_t *) ioremap(fep->tah_dev->def->paddr, sizeof(*tahp)); + if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF)) + goto undo_frame; - if (tahp == NULL) { - printk(KERN_ERR "tah%d: Cannot ioremap TAH registers!\n", - fep->tah_dev->def->index); + pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len, + DMA_TO_DEVICE); - return -ENOMEM; + slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1, + ctrl); } - out_be32(&tahp->tah_mr, TAH_MR_SR); + DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len, + dev->tx_slot, slot); - /* wait for reset to complete */ - while (in_be32(&tahp->tah_mr) & TAH_MR_SR) ; + /* Attach skb to the last slot so we don't release it too early */ + dev->tx_skb[slot] = skb; - /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ - out_be32(&tahp->tah_mr, - TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | - TAH_MR_DIG); + /* Send the packet out */ + if (dev->tx_slot == NUM_TX_BUFF - 1) + ctrl |= MAL_TX_CTRL_WRAP; + barrier(); + dev->tx_desc[dev->tx_slot].ctrl = ctrl; + dev->tx_slot = (slot + 1) % NUM_TX_BUFF; - iounmap(tahp); + return emac_xmit_finish(dev, skb->len); - return 0; + undo_frame: + /* Well, too bad. Our previous estimation was overly optimistic. + * Undo everything. + */ + while (slot != dev->tx_slot) { + dev->tx_desc[slot].ctrl = 0; + --dev->tx_cnt; + if (--slot < 0) + slot = NUM_TX_BUFF - 1; + } + ++dev->estats.tx_undo; + + stop_queue: + netif_stop_queue(ndev); + DBG2("%d: stopped TX queue" NL, dev->def->index); + return 1; +} +#else +# define emac_start_xmit_sg emac_start_xmit +#endif /* !defined(CONFIG_IBM_EMAC_TAH) */ + +/* BHs disabled */ +static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl) +{ + struct ibm_emac_error_stats *st = &dev->estats; + DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl); + + ++st->tx_bd_errors; + if (ctrl & EMAC_TX_ST_BFCS) + ++st->tx_bd_bad_fcs; + if (ctrl & EMAC_TX_ST_LCS) + ++st->tx_bd_carrier_loss; + if (ctrl & EMAC_TX_ST_ED) + ++st->tx_bd_excessive_deferral; + if (ctrl & EMAC_TX_ST_EC) + ++st->tx_bd_excessive_collisions; + if (ctrl & EMAC_TX_ST_LC) + ++st->tx_bd_late_collision; + if (ctrl & EMAC_TX_ST_MC) + ++st->tx_bd_multple_collisions; + if (ctrl & EMAC_TX_ST_SC) + ++st->tx_bd_single_collision; + if (ctrl & EMAC_TX_ST_UR) + ++st->tx_bd_underrun; + if (ctrl & EMAC_TX_ST_SQE) + ++st->tx_bd_sqe; } -static void emac_init_rings(struct net_device *dev) +static void emac_poll_tx(void *param) { - struct ocp_enet_private *ep = dev->priv; - int loop; + struct ocp_enet_private *dev = param; + DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt, + dev->ack_slot); + + if (dev->tx_cnt) { + u16 ctrl; + int slot = dev->ack_slot, n = 0; + again: + ctrl = dev->tx_desc[slot].ctrl; + if (!(ctrl & MAL_TX_CTRL_READY)) { + struct sk_buff *skb = dev->tx_skb[slot]; + ++n; + + if (skb) { + dev_kfree_skb(skb); + dev->tx_skb[slot] = NULL; + } + slot = (slot + 1) % NUM_TX_BUFF; - ep->tx_desc = (struct mal_descriptor *)((char *)ep->mal->tx_virt_addr + - (ep->mal_tx_chan * - MAL_DT_ALIGN)); - ep->rx_desc = - (struct mal_descriptor *)((char *)ep->mal->rx_virt_addr + - (ep->mal_rx_chan * MAL_DT_ALIGN)); + if (unlikely(EMAC_IS_BAD_TX(ctrl))) + emac_parse_tx_error(dev, ctrl); - /* Fill in the transmit descriptor ring. */ - for (loop = 0; loop < NUM_TX_BUFF; loop++) { - if (ep->tx_skb[loop]) { - dma_unmap_single(&ep->ocpdev->dev, - ep->tx_desc[loop].data_ptr, - ep->tx_desc[loop].data_len, - DMA_TO_DEVICE); - dev_kfree_skb_irq(ep->tx_skb[loop]); + if (--dev->tx_cnt) + goto again; } - ep->tx_skb[loop] = NULL; - ep->tx_desc[loop].ctrl = 0; - ep->tx_desc[loop].data_len = 0; - ep->tx_desc[loop].data_ptr = NULL; - } - ep->tx_desc[loop - 1].ctrl |= MAL_TX_CTRL_WRAP; - - /* Format the receive descriptor ring. */ - ep->rx_slot = 0; - /* Default is MTU=1500 + Ethernet overhead */ - ep->rx_buffer_size = dev->mtu + ENET_HEADER_SIZE + ENET_FCS_SIZE; - emac_rx_fill(dev, 0); - if (ep->rx_slot != 0) { - printk(KERN_ERR - "%s: Not enough mem for RxChain durning Open?\n", - dev->name); - /*We couldn't fill the ring at startup? - *We could clean up and fail to open but right now we will try to - *carry on. It may be a sign of a bad NUM_RX_BUFF value - */ - } + if (n) { + dev->ack_slot = slot; + if (netif_queue_stopped(dev->ndev) && + dev->tx_cnt < EMAC_TX_WAKEUP_THRESH) + netif_wake_queue(dev->ndev); - ep->tx_cnt = 0; - ep->tx_slot = 0; - ep->ack_slot = 0; + DBG2("%d: tx %d pkts" NL, dev->def->index, n); + } + } } -static void emac_reset_configure(struct ocp_enet_private *fep) +static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot, + int len) { - emac_t *emacp = fep->emacp; - int i; + struct sk_buff *skb = dev->rx_skb[slot]; + DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len); - mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask); - mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + if (len) + dma_map_single(dev->ldev, skb->data - 2, + EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE); - /* - * Check for a link, some PHYs don't provide a clock if - * no link is present. Some EMACs will not come out of - * soft reset without a PHY clock present. - */ - if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) { - /* Reset the EMAC */ - out_be32(&emacp->em0mr0, EMAC_M0_SRST); - udelay(20); - for (i = 0; i < 100; i++) { - if ((in_be32(&emacp->em0mr0) & EMAC_M0_SRST) == 0) - break; - udelay(10); - } + dev->rx_desc[slot].data_len = 0; + barrier(); + dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | + (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); +} + +static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl) +{ + struct ibm_emac_error_stats *st = &dev->estats; + DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl); + + ++st->rx_bd_errors; + if (ctrl & EMAC_RX_ST_OE) + ++st->rx_bd_overrun; + if (ctrl & EMAC_RX_ST_BP) + ++st->rx_bd_bad_packet; + if (ctrl & EMAC_RX_ST_RP) + ++st->rx_bd_runt_packet; + if (ctrl & EMAC_RX_ST_SE) + ++st->rx_bd_short_event; + if (ctrl & EMAC_RX_ST_AE) + ++st->rx_bd_alignment_error; + if (ctrl & EMAC_RX_ST_BFCS) + ++st->rx_bd_bad_fcs; + if (ctrl & EMAC_RX_ST_PTL) + ++st->rx_bd_packet_too_long; + if (ctrl & EMAC_RX_ST_ORE) + ++st->rx_bd_out_of_range; + if (ctrl & EMAC_RX_ST_IRE) + ++st->rx_bd_in_range; +} + +static inline void emac_rx_csum(struct ocp_enet_private *dev, + struct sk_buff *skb, u16 ctrl) +{ +#if defined(CONFIG_IBM_EMAC_TAH) + if (!ctrl && dev->tah_dev) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + ++dev->stats.rx_packets_csum; + } +#endif +} - if (i >= 100) { - printk(KERN_ERR "%s: Cannot reset EMAC\n", - fep->ndev->name); - return; +static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot) +{ + if (likely(dev->rx_sg_skb != NULL)) { + int len = dev->rx_desc[slot].data_len; + int tot_len = dev->rx_sg_skb->len + len; + + if (unlikely(tot_len + 2 > dev->rx_skb_size)) { + ++dev->estats.rx_dropped_mtu; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } else { + cacheable_memcpy(dev->rx_sg_skb->tail, + dev->rx_skb[slot]->data, len); + skb_put(dev->rx_sg_skb, len); + emac_recycle_rx_skb(dev, slot, len); + return 0; } } + emac_recycle_rx_skb(dev, slot, 0); + return -1; +} - /* Switch IRQs off for now */ - out_be32(&emacp->em0iser, 0); +/* BHs disabled */ +static int emac_poll_rx(void *param, int budget) +{ + struct ocp_enet_private *dev = param; + int slot = dev->rx_slot, received = 0; + + DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget); - /* Configure MAL rx channel */ - mal_set_rcbs(fep->mal, fep->mal_rx_chan, DESC_BUF_SIZE_REG); + again: + while (budget > 0) { + int len; + struct sk_buff *skb; + u16 ctrl = dev->rx_desc[slot].ctrl; + + if (ctrl & MAL_RX_CTRL_EMPTY) + break; - /* set the high address */ - out_be32(&emacp->em0iahr, - (fep->ndev->dev_addr[0] << 8) | fep->ndev->dev_addr[1]); + skb = dev->rx_skb[slot]; + barrier(); + len = dev->rx_desc[slot].data_len; - /* set the low address */ - out_be32(&emacp->em0ialr, - (fep->ndev->dev_addr[2] << 24) | (fep->ndev->dev_addr[3] << 16) - | (fep->ndev->dev_addr[4] << 8) | fep->ndev->dev_addr[5]); + if (unlikely(!MAL_IS_SINGLE_RX(ctrl))) + goto sg; - /* Adjust to link */ - if (netif_carrier_ok(fep->ndev)) - emac_adjust_to_link(fep); + ctrl &= EMAC_BAD_RX_MASK; + if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { + emac_parse_rx_error(dev, ctrl); + ++dev->estats.rx_dropped_error; + emac_recycle_rx_skb(dev, slot, 0); + len = 0; + goto next; + } - /* enable broadcast/individual address and RX FIFO defaults */ - out_be32(&emacp->em0rmr, EMAC_RMR_DEFAULT); + if (len && len < EMAC_RX_COPY_THRESH) { + struct sk_buff *copy_skb = + alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); + if (unlikely(!copy_skb)) + goto oom; + + skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2); + cacheable_memcpy(copy_skb->data - 2, skb->data - 2, + len + 2); + emac_recycle_rx_skb(dev, slot, len); + skb = copy_skb; + } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) + goto oom; + + skb_put(skb, len); + push_packet: + skb->dev = dev->ndev; + skb->protocol = eth_type_trans(skb, dev->ndev); + emac_rx_csum(dev, skb, ctrl); + + if (unlikely(netif_receive_skb(skb) == NET_RX_DROP)) + ++dev->estats.rx_dropped_stack; + next: + ++dev->stats.rx_packets; + skip: + dev->stats.rx_bytes += len; + slot = (slot + 1) % NUM_RX_BUFF; + --budget; + ++received; + continue; + sg: + if (ctrl & MAL_RX_CTRL_FIRST) { + BUG_ON(dev->rx_sg_skb); + if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) { + DBG("%d: rx OOM %d" NL, dev->def->index, slot); + ++dev->estats.rx_dropped_oom; + emac_recycle_rx_skb(dev, slot, 0); + } else { + dev->rx_sg_skb = skb; + skb_put(skb, len); + } + } else if (!emac_rx_sg_append(dev, slot) && + (ctrl & MAL_RX_CTRL_LAST)) { + + skb = dev->rx_sg_skb; + dev->rx_sg_skb = NULL; + + ctrl &= EMAC_BAD_RX_MASK; + if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { + emac_parse_rx_error(dev, ctrl); + ++dev->estats.rx_dropped_error; + dev_kfree_skb(skb); + len = 0; + } else + goto push_packet; + } + goto skip; + oom: + DBG("%d: rx OOM %d" NL, dev->def->index, slot); + /* Drop the packet and recycle skb */ + ++dev->estats.rx_dropped_oom; + emac_recycle_rx_skb(dev, slot, 0); + goto next; + } - /* set transmit request threshold register */ - out_be32(&emacp->em0trtr, EMAC_TRTR_DEFAULT); + if (received) { + DBG2("%d: rx %d BDs" NL, dev->def->index, received); + dev->rx_slot = slot; + } - /* Reconfigure multicast */ - __emac_set_multicast_list(fep->ndev); + if (unlikely(budget && dev->commac.rx_stopped)) { + struct ocp_func_emac_data *emacdata = dev->def->additions; - /* Set receiver/transmitter defaults */ - out_be32(&emacp->em0rwmr, EMAC_RWMR_DEFAULT); - out_be32(&emacp->em0tmr0, EMAC_TMR0_DEFAULT); - out_be32(&emacp->em0tmr1, EMAC_TMR1_DEFAULT); + barrier(); + if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) { + DBG2("%d: rx restart" NL, dev->def->index); + received = 0; + goto again; + } - /* set frame gap */ - out_be32(&emacp->em0ipgvr, CONFIG_IBM_EMAC_FGAP); - - /* set VLAN Tag Protocol Identifier */ - out_be32(&emacp->em0vtpid, 0x8100); + if (dev->rx_sg_skb) { + DBG2("%d: dropping partial rx packet" NL, + dev->def->index); + ++dev->estats.rx_dropped_error; + dev_kfree_skb(dev->rx_sg_skb); + dev->rx_sg_skb = NULL; + } - /* Init ring buffers */ - emac_init_rings(fep->ndev); + dev->commac.rx_stopped = 0; + mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); + emac_rx_enable(dev); + dev->rx_slot = 0; + } + return received; } -static void emac_kick(struct ocp_enet_private *fep) +/* BHs disabled */ +static int emac_peek_rx(void *param) { - emac_t *emacp = fep->emacp; - unsigned long emac_ier; - - emac_ier = EMAC_ISR_PP | EMAC_ISR_BP | EMAC_ISR_RP | - EMAC_ISR_SE | EMAC_ISR_PTLE | EMAC_ISR_ALE | - EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; + struct ocp_enet_private *dev = param; + return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY); +} - out_be32(&emacp->em0iser, emac_ier); +/* BHs disabled */ +static int emac_peek_rx_sg(void *param) +{ + struct ocp_enet_private *dev = param; + int slot = dev->rx_slot; + while (1) { + u16 ctrl = dev->rx_desc[slot].ctrl; + if (ctrl & MAL_RX_CTRL_EMPTY) + return 0; + else if (ctrl & MAL_RX_CTRL_LAST) + return 1; - /* enable all MAL transmit and receive channels */ - mal_enable_tx_channels(fep->mal, fep->commac.tx_chan_mask); - mal_enable_rx_channels(fep->mal, fep->commac.rx_chan_mask); + slot = (slot + 1) % NUM_RX_BUFF; - /* set transmit and receive enable */ - out_be32(&emacp->em0mr0, EMAC_M0_TXE | EMAC_M0_RXE); + /* I'm just being paranoid here :) */ + if (unlikely(slot == dev->rx_slot)) + return 0; + } } -static void -emac_start_link(struct ocp_enet_private *fep, struct ethtool_cmd *ep) +/* Hard IRQ */ +static void emac_rxde(void *param) { - u32 advertise; - int autoneg; - int forced_speed; - int forced_duplex; + struct ocp_enet_private *dev = param; + ++dev->estats.rx_stopped; + emac_rx_disable_async(dev); +} - /* Default advertise */ - advertise = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full; - autoneg = fep->want_autoneg; - forced_speed = fep->phy_mii.speed; - forced_duplex = fep->phy_mii.duplex; +/* Hard IRQ */ +static irqreturn_t emac_irq(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ocp_enet_private *dev = dev_instance; + struct emac_regs *p = dev->emacp; + struct ibm_emac_error_stats *st = &dev->estats; + + u32 isr = in_be32(&p->isr); + out_be32(&p->isr, isr); + + DBG("%d: isr = %08x" NL, dev->def->index, isr); + + if (isr & EMAC_ISR_TXPE) + ++st->tx_parity; + if (isr & EMAC_ISR_RXPE) + ++st->rx_parity; + if (isr & EMAC_ISR_TXUE) + ++st->tx_underrun; + if (isr & EMAC_ISR_RXOE) + ++st->rx_fifo_overrun; + if (isr & EMAC_ISR_OVR) + ++st->rx_overrun; + if (isr & EMAC_ISR_BP) + ++st->rx_bad_packet; + if (isr & EMAC_ISR_RP) + ++st->rx_runt_packet; + if (isr & EMAC_ISR_SE) + ++st->rx_short_event; + if (isr & EMAC_ISR_ALE) + ++st->rx_alignment_error; + if (isr & EMAC_ISR_BFCS) + ++st->rx_bad_fcs; + if (isr & EMAC_ISR_PTLE) + ++st->rx_packet_too_long; + if (isr & EMAC_ISR_ORE) + ++st->rx_out_of_range; + if (isr & EMAC_ISR_IRE) + ++st->rx_in_range; + if (isr & EMAC_ISR_SQE) + ++st->tx_sqe; + if (isr & EMAC_ISR_TE) + ++st->tx_errors; - /* Setup link parameters */ - if (ep) { - if (ep->autoneg == AUTONEG_ENABLE) { - advertise = ep->advertising; - autoneg = 1; - } else { - autoneg = 0; - forced_speed = ep->speed; - forced_duplex = ep->duplex; - } - } + return IRQ_HANDLED; +} - /* Configure PHY & start aneg */ - fep->want_autoneg = autoneg; - if (autoneg) { - LINK_DEBUG(("%s: start link aneg, advertise: 0x%x\n", - fep->ndev->name, advertise)); - fep->phy_mii.def->ops->setup_aneg(&fep->phy_mii, advertise); - } else { - LINK_DEBUG(("%s: start link forced, speed: %d, duplex: %d\n", - fep->ndev->name, forced_speed, forced_duplex)); - fep->phy_mii.def->ops->setup_forced(&fep->phy_mii, forced_speed, - forced_duplex); - } - fep->timer_ticks = 0; - mod_timer(&fep->link_timer, jiffies + HZ); +static struct net_device_stats *emac_stats(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + struct ibm_emac_stats *st = &dev->stats; + struct ibm_emac_error_stats *est = &dev->estats; + struct net_device_stats *nst = &dev->nstats; + + DBG2("%d: stats" NL, dev->def->index); + + /* Compute "legacy" statistics */ + local_irq_disable(); + nst->rx_packets = (unsigned long)st->rx_packets; + nst->rx_bytes = (unsigned long)st->rx_bytes; + nst->tx_packets = (unsigned long)st->tx_packets; + nst->tx_bytes = (unsigned long)st->tx_bytes; + nst->rx_dropped = (unsigned long)(est->rx_dropped_oom + + est->rx_dropped_error + + est->rx_dropped_resize + + est->rx_dropped_mtu); + nst->tx_dropped = (unsigned long)est->tx_dropped; + + nst->rx_errors = (unsigned long)est->rx_bd_errors; + nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun + + est->rx_fifo_overrun + + est->rx_overrun); + nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error + + est->rx_alignment_error); + nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs + + est->rx_bad_fcs); + nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet + + est->rx_bd_short_event + + est->rx_bd_packet_too_long + + est->rx_bd_out_of_range + + est->rx_bd_in_range + + est->rx_runt_packet + + est->rx_short_event + + est->rx_packet_too_long + + est->rx_out_of_range + + est->rx_in_range); + + nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors); + nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun + + est->tx_underrun); + nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss; + nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral + + est->tx_bd_excessive_collisions + + est->tx_bd_late_collision + + est->tx_bd_multple_collisions); + local_irq_enable(); + return nst; } -static void emac_link_timer(unsigned long data) +static void emac_remove(struct ocp_device *ocpdev) { - struct ocp_enet_private *fep = (struct ocp_enet_private *)data; - int link; + struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev); - if (fep->going_away) - return; + DBG("%d: remove" NL, dev->def->index); - spin_lock_irq(&fep->lock); + ocp_set_drvdata(ocpdev, 0); + unregister_netdev(dev->ndev); - link = fep->phy_mii.def->ops->poll_link(&fep->phy_mii); - LINK_DEBUG(("%s: poll_link: %d\n", fep->ndev->name, link)); + tah_fini(dev->tah_dev); + rgmii_fini(dev->rgmii_dev, dev->rgmii_input); + zmii_fini(dev->zmii_dev, dev->zmii_input); - if (link == netif_carrier_ok(fep->ndev)) { - if (!link && fep->want_autoneg && (++fep->timer_ticks) > 10) - emac_start_link(fep, NULL); - goto out; - } - printk(KERN_INFO "%s: Link is %s\n", fep->ndev->name, - link ? "Up" : "Down"); - if (link) { - netif_carrier_on(fep->ndev); - /* Chip needs a full reset on config change. That sucks, so I - * should ultimately move that to some tasklet to limit - * latency peaks caused by this code - */ - emac_reset_configure(fep); - if (fep->opened) - emac_kick(fep); - } else { - fep->timer_ticks = 0; - netif_carrier_off(fep->ndev); - } - out: - mod_timer(&fep->link_timer, jiffies + HZ); - spin_unlock_irq(&fep->lock); + emac_dbg_register(dev->def->index, 0); + + mal_unregister_commac(dev->mal, &dev->commac); + iounmap((void *)dev->emacp); + kfree(dev->ndev); } -static void emac_set_multicast_list(struct net_device *dev) -{ - struct ocp_enet_private *fep = dev->priv; +static struct mal_commac_ops emac_commac_ops = { + .poll_tx = &emac_poll_tx, + .poll_rx = &emac_poll_rx, + .peek_rx = &emac_peek_rx, + .rxde = &emac_rxde, +}; - spin_lock_irq(&fep->lock); - __emac_set_multicast_list(dev); - spin_unlock_irq(&fep->lock); -} +static struct mal_commac_ops emac_commac_sg_ops = { + .poll_tx = &emac_poll_tx, + .poll_rx = &emac_poll_rx, + .peek_rx = &emac_peek_rx_sg, + .rxde = &emac_rxde, +}; -static int emac_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +/* Ethtool support */ +static int emac_ethtool_get_settings(struct net_device *ndev, + struct ethtool_cmd *cmd) { - struct ocp_enet_private *fep = ndev->priv; + struct ocp_enet_private *dev = ndev->priv; - cmd->supported = fep->phy_mii.def->features; + cmd->supported = dev->phy.features; cmd->port = PORT_MII; - cmd->transceiver = XCVR_EXTERNAL; - cmd->phy_address = fep->mii_phy_addr; - spin_lock_irq(&fep->lock); - cmd->autoneg = fep->want_autoneg; - cmd->speed = fep->phy_mii.speed; - cmd->duplex = fep->phy_mii.duplex; - spin_unlock_irq(&fep->lock); + cmd->phy_address = dev->phy.address; + cmd->transceiver = + dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL; + + local_bh_disable(); + cmd->advertising = dev->phy.advertising; + cmd->autoneg = dev->phy.autoneg; + cmd->speed = dev->phy.speed; + cmd->duplex = dev->phy.duplex; + local_bh_enable(); + return 0; } -static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +static int emac_ethtool_set_settings(struct net_device *ndev, + struct ethtool_cmd *cmd) { - struct ocp_enet_private *fep = ndev->priv; - unsigned long features = fep->phy_mii.def->features; + struct ocp_enet_private *dev = ndev->priv; + u32 f = dev->phy.features; - if (!capable(CAP_NET_ADMIN)) - return -EPERM; + DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index, + cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising); + /* Basic sanity checks */ + if (dev->phy.address < 0) + return -EOPNOTSUPP; if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) return -EINVAL; if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) return -EINVAL; if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) return -EINVAL; - if (cmd->autoneg == AUTONEG_DISABLE) + + if (cmd->autoneg == AUTONEG_DISABLE) { switch (cmd->speed) { case SPEED_10: - if (cmd->duplex == DUPLEX_HALF && - (features & SUPPORTED_10baseT_Half) == 0) + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_10baseT_Half)) return -EINVAL; - if (cmd->duplex == DUPLEX_FULL && - (features & SUPPORTED_10baseT_Full) == 0) + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_10baseT_Full)) return -EINVAL; break; case SPEED_100: - if (cmd->duplex == DUPLEX_HALF && - (features & SUPPORTED_100baseT_Half) == 0) + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_100baseT_Half)) return -EINVAL; - if (cmd->duplex == DUPLEX_FULL && - (features & SUPPORTED_100baseT_Full) == 0) + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_100baseT_Full)) return -EINVAL; break; case SPEED_1000: - if (cmd->duplex == DUPLEX_HALF && - (features & SUPPORTED_1000baseT_Half) == 0) + if (cmd->duplex == DUPLEX_HALF + && !(f & SUPPORTED_1000baseT_Half)) return -EINVAL; - if (cmd->duplex == DUPLEX_FULL && - (features & SUPPORTED_1000baseT_Full) == 0) + if (cmd->duplex == DUPLEX_FULL + && !(f & SUPPORTED_1000baseT_Full)) return -EINVAL; break; default: return -EINVAL; - } else if ((features & SUPPORTED_Autoneg) == 0) - return -EINVAL; - spin_lock_irq(&fep->lock); - emac_start_link(fep, cmd); - spin_unlock_irq(&fep->lock); + } + + local_bh_disable(); + dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed, + cmd->duplex); + + } else { + if (!(f & SUPPORTED_Autoneg)) + return -EINVAL; + + local_bh_disable(); + dev->phy.def->ops->setup_aneg(&dev->phy, + (cmd->advertising & f) | + (dev->phy.advertising & + (ADVERTISED_Pause | + ADVERTISED_Asym_Pause))); + } + emac_force_link_update(dev); + local_bh_enable(); + return 0; } -static void -emac_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) +static void emac_ethtool_get_ringparam(struct net_device *ndev, + struct ethtool_ringparam *rp) { - struct ocp_enet_private *fep = ndev->priv; - - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - info->fw_version[0] = '\0'; - sprintf(info->bus_info, "IBM EMAC %d", fep->ocpdev->def->index); - info->regdump_len = 0; + rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF; + rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF; } -static int emac_nway_reset(struct net_device *ndev) +static void emac_ethtool_get_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *pp) { - struct ocp_enet_private *fep = ndev->priv; + struct ocp_enet_private *dev = ndev->priv; + + local_bh_disable(); + if ((dev->phy.features & SUPPORTED_Autoneg) && + (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause))) + pp->autoneg = 1; + + if (dev->phy.duplex == DUPLEX_FULL) { + if (dev->phy.pause) + pp->rx_pause = pp->tx_pause = 1; + else if (dev->phy.asym_pause) + pp->tx_pause = 1; + } + local_bh_enable(); +} - if (!fep->want_autoneg) - return -EINVAL; - spin_lock_irq(&fep->lock); - emac_start_link(fep, NULL); - spin_unlock_irq(&fep->lock); - return 0; +static u32 emac_ethtool_get_rx_csum(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + return dev->tah_dev != 0; } -static u32 emac_get_link(struct net_device *ndev) +static int emac_get_regs_len(struct ocp_enet_private *dev) { - return netif_carrier_ok(ndev); + return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE; } -static struct ethtool_ops emac_ethtool_ops = { - .get_settings = emac_get_settings, - .set_settings = emac_set_settings, - .get_drvinfo = emac_get_drvinfo, - .nway_reset = emac_nway_reset, - .get_link = emac_get_link -}; +static int emac_ethtool_get_regs_len(struct net_device *ndev) +{ + struct ocp_enet_private *dev = ndev->priv; + return sizeof(struct emac_ethtool_regs_hdr) + + emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) + + zmii_get_regs_len(dev->zmii_dev) + + rgmii_get_regs_len(dev->rgmii_dev) + + tah_get_regs_len(dev->tah_dev); +} -static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf) { - struct ocp_enet_private *fep = dev->priv; - uint16_t *data = (uint16_t *) & rq->ifr_ifru; + struct emac_ethtool_regs_subhdr *hdr = buf; - switch (cmd) { - case SIOCGMIIPHY: - data[0] = fep->mii_phy_addr; - /* Fall through */ - case SIOCGMIIREG: - data[3] = emac_phy_read(dev, fep->mii_phy_addr, data[1]); - return 0; - case SIOCSMIIREG: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; + hdr->version = EMAC_ETHTOOL_REGS_VER; + hdr->index = dev->def->index; + memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE); + return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE); +} - emac_phy_write(dev, fep->mii_phy_addr, data[1], data[2]); - return 0; - default: - return -EOPNOTSUPP; +static void emac_ethtool_get_regs(struct net_device *ndev, + struct ethtool_regs *regs, void *buf) +{ + struct ocp_enet_private *dev = ndev->priv; + struct emac_ethtool_regs_hdr *hdr = buf; + + hdr->components = 0; + buf = hdr + 1; + + local_irq_disable(); + buf = mal_dump_regs(dev->mal, buf); + buf = emac_dump_regs(dev, buf); + if (dev->zmii_dev) { + hdr->components |= EMAC_ETHTOOL_REGS_ZMII; + buf = zmii_dump_regs(dev->zmii_dev, buf); + } + if (dev->rgmii_dev) { + hdr->components |= EMAC_ETHTOOL_REGS_RGMII; + buf = rgmii_dump_regs(dev->rgmii_dev, buf); } + if (dev->tah_dev) { + hdr->components |= EMAC_ETHTOOL_REGS_TAH; + buf = tah_dump_regs(dev->tah_dev, buf); + } + local_irq_enable(); } -static int emac_open(struct net_device *dev) +static int emac_ethtool_nway_reset(struct net_device *ndev) { - struct ocp_enet_private *fep = dev->priv; - int rc; + struct ocp_enet_private *dev = ndev->priv; + int res = 0; - spin_lock_irq(&fep->lock); + DBG("%d: nway_reset" NL, dev->def->index); - fep->opened = 1; - netif_carrier_off(dev); + if (dev->phy.address < 0) + return -EOPNOTSUPP; - /* Reset & configure the chip */ - emac_reset_configure(fep); + local_bh_disable(); + if (!dev->phy.autoneg) { + res = -EINVAL; + goto out; + } - spin_unlock_irq(&fep->lock); + dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising); + emac_force_link_update(dev); - /* Request our interrupt lines */ - rc = request_irq(dev->irq, emac_mac_irq, 0, "IBM EMAC MAC", dev); - if (rc != 0) { - printk("dev->irq %d failed\n", dev->irq); - goto bail; - } - /* Kick the chip rx & tx channels into life */ - spin_lock_irq(&fep->lock); - emac_kick(fep); - spin_unlock_irq(&fep->lock); + out: + local_bh_enable(); + return res; +} - netif_start_queue(dev); - bail: - return rc; +static int emac_ethtool_get_stats_count(struct net_device *ndev) +{ + return EMAC_ETHTOOL_STATS_COUNT; } -static int emac_close(struct net_device *dev) +static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset, + u8 * buf) { - struct ocp_enet_private *fep = dev->priv; - emac_t *emacp = fep->emacp; + if (stringset == ETH_SS_STATS) + memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys)); +} - /* XXX Stop IRQ emitting here */ - spin_lock_irq(&fep->lock); - fep->opened = 0; - mal_disable_tx_channels(fep->mal, fep->commac.tx_chan_mask); - mal_disable_rx_channels(fep->mal, fep->commac.rx_chan_mask); - netif_carrier_off(dev); - netif_stop_queue(dev); +static void emac_ethtool_get_ethtool_stats(struct net_device *ndev, + struct ethtool_stats *estats, + u64 * tmp_stats) +{ + struct ocp_enet_private *dev = ndev->priv; + local_irq_disable(); + memcpy(tmp_stats, &dev->stats, sizeof(dev->stats)); + tmp_stats += sizeof(dev->stats) / sizeof(u64); + memcpy(tmp_stats, &dev->estats, sizeof(dev->estats)); + local_irq_enable(); +} - /* - * Check for a link, some PHYs don't provide a clock if - * no link is present. Some EMACs will not come out of - * soft reset without a PHY clock present. - */ - if (fep->phy_mii.def->ops->poll_link(&fep->phy_mii)) { - out_be32(&emacp->em0mr0, EMAC_M0_SRST); - udelay(10); +static void emac_ethtool_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *info) +{ + struct ocp_enet_private *dev = ndev->priv; - if (emacp->em0mr0 & EMAC_M0_SRST) { - /*not sure what to do here hopefully it clears before another open */ - printk(KERN_ERR - "%s: Phy SoftReset didn't clear, no link?\n", - dev->name); - } - } + strcpy(info->driver, "ibm_emac"); + strcpy(info->version, DRV_VERSION); + info->fw_version[0] = '\0'; + sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index); + info->n_stats = emac_ethtool_get_stats_count(ndev); + info->regdump_len = emac_ethtool_get_regs_len(ndev); +} - /* Free the irq's */ - free_irq(dev->irq, dev); +static struct ethtool_ops emac_ethtool_ops = { + .get_settings = emac_ethtool_get_settings, + .set_settings = emac_ethtool_set_settings, + .get_drvinfo = emac_ethtool_get_drvinfo, - spin_unlock_irq(&fep->lock); + .get_regs_len = emac_ethtool_get_regs_len, + .get_regs = emac_ethtool_get_regs, - return 0; -} + .nway_reset = emac_ethtool_nway_reset, -static void emac_remove(struct ocp_device *ocpdev) -{ - struct net_device *dev = ocp_get_drvdata(ocpdev); - struct ocp_enet_private *ep = dev->priv; - - /* FIXME: locking, races, ... */ - ep->going_away = 1; - ocp_set_drvdata(ocpdev, NULL); - if (ep->rgmii_dev) - emac_close_rgmii(ep->rgmii_dev); - if (ep->zmii_dev) - emac_close_zmii(ep->zmii_dev); - - unregister_netdev(dev); - del_timer_sync(&ep->link_timer); - mal_unregister_commac(ep->mal, &ep->commac); - iounmap((void *)ep->emacp); - kfree(dev); -} - -struct mal_commac_ops emac_commac_ops = { - .txeob = &emac_txeob_dev, - .txde = &emac_txde_dev, - .rxeob = &emac_rxeob_dev, - .rxde = &emac_rxde_dev, + .get_ringparam = emac_ethtool_get_ringparam, + .get_pauseparam = emac_ethtool_get_pauseparam, + + .get_rx_csum = emac_ethtool_get_rx_csum, + + .get_strings = emac_ethtool_get_strings, + .get_stats_count = emac_ethtool_get_stats_count, + .get_ethtool_stats = emac_ethtool_get_ethtool_stats, + + .get_link = ethtool_op_get_link, + .get_tx_csum = ethtool_op_get_tx_csum, + .get_sg = ethtool_op_get_sg, }; -#ifdef CONFIG_NET_POLL_CONTROLLER -static void emac_netpoll(struct net_device *ndev) +static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) { - emac_rxeob_dev((void *)ndev, 0); - emac_txeob_dev((void *)ndev, 0); + struct ocp_enet_private *dev = ndev->priv; + uint16_t *data = (uint16_t *) & rq->ifr_ifru; + + DBG("%d: ioctl %08x" NL, dev->def->index, cmd); + + if (dev->phy.address < 0) + return -EOPNOTSUPP; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCDEVPRIVATE: + data[0] = dev->phy.address; + /* Fall through */ + case SIOCGMIIREG: + case SIOCDEVPRIVATE + 1: + data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]); + return 0; + + case SIOCSMIIREG: + case SIOCDEVPRIVATE + 2: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + emac_mdio_write(ndev, dev->phy.address, data[1], data[2]); + return 0; + default: + return -EOPNOTSUPP; + } } -#endif -static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) +static int __init emac_probe(struct ocp_device *ocpdev) { - int deferred_init = 0; - int rc = 0, i; + struct ocp_func_emac_data *emacdata = ocpdev->def->additions; struct net_device *ndev; - struct ocp_enet_private *ep; - struct ocp_func_emac_data *emacdata; - int commac_reg = 0; - u32 phy_map; + struct ocp_device *maldev; + struct ocp_enet_private *dev; + int err, i; + + DBG("%d: probe" NL, ocpdev->def->index); - emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions; if (!emacdata) { printk(KERN_ERR "emac%d: Missing additional data!\n", ocpdev->def->index); @@ -1738,304 +1936,312 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) /* Allocate our net_device structure */ ndev = alloc_etherdev(sizeof(struct ocp_enet_private)); - if (ndev == NULL) { - printk(KERN_ERR - "emac%d: Could not allocate ethernet device.\n", + if (!ndev) { + printk(KERN_ERR "emac%d: could not allocate ethernet device!\n", ocpdev->def->index); return -ENOMEM; } - ep = ndev->priv; - ep->ndev = ndev; - ep->ocpdev = ocpdev; - ndev->irq = ocpdev->def->irq; - ep->wol_irq = emacdata->wol_irq; - if (emacdata->mdio_idx >= 0) { - if (emacdata->mdio_idx == ocpdev->def->index) { - /* Set the common MDIO net_device */ - mdio_ndev = ndev; - deferred_init = 1; - } - ep->mdio_dev = mdio_ndev; - } else { - ep->mdio_dev = ndev; - } + dev = ndev->priv; + dev->ndev = ndev; + dev->ldev = &ocpdev->dev; + dev->def = ocpdev->def; + SET_MODULE_OWNER(ndev); - ocp_set_drvdata(ocpdev, ndev); - - spin_lock_init(&ep->lock); - - /* Fill out MAL informations and register commac */ - ep->mal = mal; - ep->mal_tx_chan = emacdata->mal_tx_chan; - ep->mal_rx_chan = emacdata->mal_rx_chan; - ep->commac.ops = &emac_commac_ops; - ep->commac.dev = ndev; - ep->commac.tx_chan_mask = MAL_CHAN_MASK(ep->mal_tx_chan); - ep->commac.rx_chan_mask = MAL_CHAN_MASK(ep->mal_rx_chan); - rc = mal_register_commac(ep->mal, &ep->commac); - if (rc != 0) - goto bail; - commac_reg = 1; - - /* Map our MMIOs */ - ep->emacp = (emac_t *) ioremap(ocpdev->def->paddr, sizeof(emac_t)); - - /* Check if we need to attach to a ZMII */ - if (emacdata->zmii_idx >= 0) { - ep->zmii_input = emacdata->zmii_mux; - ep->zmii_dev = - ocp_find_device(OCP_ANY_ID, OCP_FUNC_ZMII, - emacdata->zmii_idx); - if (ep->zmii_dev == NULL) - printk(KERN_WARNING - "emac%d: ZMII %d requested but not found !\n", - ocpdev->def->index, emacdata->zmii_idx); - else if ((rc = - emac_init_zmii(ep->zmii_dev, ep->zmii_input, - emacdata->phy_mode)) != 0) - goto bail; + /* Find MAL device we are connected to */ + maldev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx); + if (!maldev) { + printk(KERN_ERR "emac%d: unknown mal%d device!\n", + dev->def->index, emacdata->mal_idx); + err = -ENODEV; + goto out; + } + dev->mal = ocp_get_drvdata(maldev); + if (!dev->mal) { + printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n", + dev->def->index, emacdata->mal_idx); + err = -ENODEV; + goto out; } - /* Check if we need to attach to a RGMII */ - if (emacdata->rgmii_idx >= 0) { - ep->rgmii_input = emacdata->rgmii_mux; - ep->rgmii_dev = - ocp_find_device(OCP_ANY_ID, OCP_FUNC_RGMII, - emacdata->rgmii_idx); - if (ep->rgmii_dev == NULL) - printk(KERN_WARNING - "emac%d: RGMII %d requested but not found !\n", - ocpdev->def->index, emacdata->rgmii_idx); - else if ((rc = - emac_init_rgmii(ep->rgmii_dev, ep->rgmii_input, - emacdata->phy_mode)) != 0) - goto bail; + /* Register with MAL */ + dev->commac.ops = &emac_commac_ops; + dev->commac.dev = dev; + dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan); + dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan); + err = mal_register_commac(dev->mal, &dev->commac); + if (err) { + printk(KERN_ERR "emac%d: failed to register with mal%d!\n", + dev->def->index, emacdata->mal_idx); + goto out; + } + dev->rx_skb_size = emac_rx_skb_size(ndev->mtu); + dev->rx_sync_size = emac_rx_sync_size(ndev->mtu); + + /* Get pointers to BD rings */ + dev->tx_desc = + dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, + emacdata->mal_tx_chan); + dev->rx_desc = + dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, + emacdata->mal_rx_chan); + + DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc); + DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc); + + /* Clean rings */ + memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); + memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); + + /* If we depend on another EMAC for MDIO, check whether it was probed already */ + if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) { + struct ocp_device *mdiodev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, + emacdata->mdio_idx); + if (!mdiodev) { + printk(KERN_ERR "emac%d: unknown emac%d device!\n", + dev->def->index, emacdata->mdio_idx); + err = -ENODEV; + goto out2; + } + dev->mdio_dev = ocp_get_drvdata(mdiodev); + if (!dev->mdio_dev) { + printk(KERN_ERR + "emac%d: emac%d hasn't been initialized yet!\n", + dev->def->index, emacdata->mdio_idx); + err = -ENODEV; + goto out2; + } } - /* Check if we need to attach to a TAH */ - if (emacdata->tah_idx >= 0) { - ep->tah_dev = - ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH, - emacdata->tah_idx); - if (ep->tah_dev == NULL) - printk(KERN_WARNING - "emac%d: TAH %d requested but not found !\n", - ocpdev->def->index, emacdata->tah_idx); - else if ((rc = emac_init_tah(ep)) != 0) - goto bail; + /* Attach to ZMII, if needed */ + if ((err = zmii_attach(dev)) != 0) + goto out2; + + /* Attach to RGMII, if needed */ + if ((err = rgmii_attach(dev)) != 0) + goto out3; + + /* Attach to TAH, if needed */ + if ((err = tah_attach(dev)) != 0) + goto out4; + + /* Map EMAC regs */ + dev->emacp = + (struct emac_regs *)ioremap(dev->def->paddr, + sizeof(struct emac_regs)); + if (!dev->emacp) { + printk(KERN_ERR "emac%d: could not ioremap device registers!\n", + dev->def->index); + err = -ENOMEM; + goto out5; } - if (deferred_init) { - if (!list_empty(&emac_init_list)) { - struct list_head *entry; - struct emac_def_dev *ddev; + /* Fill in MAC address */ + for (i = 0; i < 6; ++i) + ndev->dev_addr[i] = emacdata->mac_addr[i]; - list_for_each(entry, &emac_init_list) { - ddev = - list_entry(entry, struct emac_def_dev, - link); - emac_init_device(ddev->ocpdev, ddev->mal); - } + /* Set some link defaults before we can find out real parameters */ + dev->phy.speed = SPEED_100; + dev->phy.duplex = DUPLEX_FULL; + dev->phy.autoneg = AUTONEG_DISABLE; + dev->phy.pause = dev->phy.asym_pause = 0; + init_timer(&dev->link_timer); + dev->link_timer.function = emac_link_timer; + dev->link_timer.data = (unsigned long)dev; + + /* Find PHY if any */ + dev->phy.dev = ndev; + dev->phy.mode = emacdata->phy_mode; + if (emacdata->phy_map != 0xffffffff) { + u32 phy_map = emacdata->phy_map | busy_phy_map; + u32 adv; + + DBG("%d: PHY maps %08x %08x" NL, dev->def->index, + emacdata->phy_map, busy_phy_map); + + EMAC_RX_CLK_TX(dev->def->index); + + dev->phy.mdio_read = emac_mdio_read; + dev->phy.mdio_write = emac_mdio_write; + + /* Configure EMAC with defaults so we can at least use MDIO + * This is needed mostly for 440GX + */ + if (emac_phy_gpcs(dev->phy.mode)) { + /* XXX + * Make GPCS PHY address equal to EMAC index. + * We probably should take into account busy_phy_map + * and/or phy_map here. + */ + dev->phy.address = dev->def->index; } - } + + emac_configure(dev); + + for (i = 0; i < 0x20; phy_map >>= 1, ++i) + if (!(phy_map & 1)) { + int r; + busy_phy_map |= 1 << i; - /* Init link monitoring timer */ - init_timer(&ep->link_timer); - ep->link_timer.function = emac_link_timer; - ep->link_timer.data = (unsigned long)ep; - ep->timer_ticks = 0; - - /* Fill up the mii_phy structure */ - ep->phy_mii.dev = ndev; - ep->phy_mii.mdio_read = emac_phy_read; - ep->phy_mii.mdio_write = emac_phy_write; - ep->phy_mii.mode = emacdata->phy_mode; - - /* Find PHY */ - phy_map = emacdata->phy_map | busy_phy_map; - for (i = 0; i <= 0x1f; i++, phy_map >>= 1) { - if ((phy_map & 0x1) == 0) { - int val = emac_phy_read(ndev, i, MII_BMCR); - if (val != 0xffff && val != -1) - break; + /* Quick check if there is a PHY at the address */ + r = emac_mdio_read(dev->ndev, i, MII_BMCR); + if (r == 0xffff || r < 0) + continue; + if (!mii_phy_probe(&dev->phy, i)) + break; + } + if (i == 0x20) { + printk(KERN_WARNING "emac%d: can't find PHY!\n", + dev->def->index); + goto out6; } - } - if (i == 0x20) { - printk(KERN_WARNING "emac%d: Can't find PHY.\n", - ocpdev->def->index); - rc = -ENODEV; - goto bail; - } - busy_phy_map |= 1 << i; - ep->mii_phy_addr = i; - rc = mii_phy_probe(&ep->phy_mii, i); - if (rc) { - printk(KERN_WARNING "emac%d: Failed to probe PHY type.\n", - ocpdev->def->index); - rc = -ENODEV; - goto bail; - } - - /* Disable any PHY features not supported by the platform */ - ep->phy_mii.def->features &= ~emacdata->phy_feat_exc; - /* Setup initial PHY config & startup aneg */ - if (ep->phy_mii.def->ops->init) - ep->phy_mii.def->ops->init(&ep->phy_mii); - netif_carrier_off(ndev); - if (ep->phy_mii.def->features & SUPPORTED_Autoneg) - ep->want_autoneg = 1; - else { - ep->want_autoneg = 0; + /* Init PHY */ + if (dev->phy.def->ops->init) + dev->phy.def->ops->init(&dev->phy); - /* Select highest supported speed/duplex */ - if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) { - ep->phy_mii.speed = SPEED_1000; - ep->phy_mii.duplex = DUPLEX_FULL; - } else if (ep->phy_mii.def->features & - SUPPORTED_1000baseT_Half) { - ep->phy_mii.speed = SPEED_1000; - ep->phy_mii.duplex = DUPLEX_HALF; - } else if (ep->phy_mii.def->features & - SUPPORTED_100baseT_Full) { - ep->phy_mii.speed = SPEED_100; - ep->phy_mii.duplex = DUPLEX_FULL; - } else if (ep->phy_mii.def->features & - SUPPORTED_100baseT_Half) { - ep->phy_mii.speed = SPEED_100; - ep->phy_mii.duplex = DUPLEX_HALF; - } else if (ep->phy_mii.def->features & - SUPPORTED_10baseT_Full) { - ep->phy_mii.speed = SPEED_10; - ep->phy_mii.duplex = DUPLEX_FULL; + /* Disable any PHY features not supported by the platform */ + dev->phy.def->features &= ~emacdata->phy_feat_exc; + + /* Setup initial link parameters */ + if (dev->phy.features & SUPPORTED_Autoneg) { + adv = dev->phy.features; +#if !defined(CONFIG_40x) + adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; +#endif + /* Restart autonegotiation */ + dev->phy.def->ops->setup_aneg(&dev->phy, adv); } else { - ep->phy_mii.speed = SPEED_10; - ep->phy_mii.duplex = DUPLEX_HALF; + u32 f = dev->phy.def->features; + int speed = SPEED_10, fd = DUPLEX_HALF; + + /* Select highest supported speed/duplex */ + if (f & SUPPORTED_1000baseT_Full) { + speed = SPEED_1000; + fd = DUPLEX_FULL; + } else if (f & SUPPORTED_1000baseT_Half) + speed = SPEED_1000; + else if (f & SUPPORTED_100baseT_Full) { + speed = SPEED_100; + fd = DUPLEX_FULL; + } else if (f & SUPPORTED_100baseT_Half) + speed = SPEED_100; + else if (f & SUPPORTED_10baseT_Full) + fd = DUPLEX_FULL; + + /* Force link parameters */ + dev->phy.def->ops->setup_forced(&dev->phy, speed, fd); } - } - emac_start_link(ep, NULL); + } else { + emac_reset(dev); - /* read the MAC Address */ - for (i = 0; i < 6; i++) - ndev->dev_addr[i] = emacdata->mac_addr[i]; + /* PHY-less configuration. + * XXX I probably should move these settings to emacdata + */ + dev->phy.address = -1; + dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; + dev->phy.pause = 1; + } /* Fill in the driver function table */ ndev->open = &emac_open; - ndev->hard_start_xmit = &emac_start_xmit; + if (dev->tah_dev) { + ndev->hard_start_xmit = &emac_start_xmit_sg; + ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; + } else + ndev->hard_start_xmit = &emac_start_xmit; + ndev->tx_timeout = &emac_full_tx_reset; + ndev->watchdog_timeo = 5 * HZ; ndev->stop = &emac_close; ndev->get_stats = &emac_stats; - if (emacdata->jumbo) - ndev->change_mtu = &emac_change_mtu; - ndev->set_mac_address = &emac_set_mac_address; ndev->set_multicast_list = &emac_set_multicast_list; ndev->do_ioctl = &emac_ioctl; + if (emac_phy_supports_gige(emacdata->phy_mode)) { + ndev->change_mtu = &emac_change_mtu; + dev->commac.ops = &emac_commac_sg_ops; + } SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); - if (emacdata->tah_idx >= 0) - ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG; -#ifdef CONFIG_NET_POLL_CONTROLLER - ndev->poll_controller = emac_netpoll; -#endif - SET_MODULE_OWNER(ndev); + netif_carrier_off(ndev); + netif_stop_queue(ndev); + + err = register_netdev(ndev); + if (err) { + printk(KERN_ERR "emac%d: failed to register net device (%d)!\n", + dev->def->index, err); + goto out6; + } - rc = register_netdev(ndev); - if (rc != 0) - goto bail; + ocp_set_drvdata(ocpdev, dev); - printk("%s: IBM emac, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", - ndev->name, + printk("%s: emac%d, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + ndev->name, dev->def->index, ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); - printk(KERN_INFO "%s: Found %s PHY (0x%02x)\n", - ndev->name, ep->phy_mii.def->name, ep->mii_phy_addr); - - bail: - if (rc && commac_reg) - mal_unregister_commac(ep->mal, &ep->commac); - if (rc && ndev) - kfree(ndev); - - return rc; -} - -static int emac_probe(struct ocp_device *ocpdev) -{ - struct ocp_device *maldev; - struct ibm_ocp_mal *mal; - struct ocp_func_emac_data *emacdata; - - emacdata = (struct ocp_func_emac_data *)ocpdev->def->additions; - if (emacdata == NULL) { - printk(KERN_ERR "emac%d: Missing additional datas !\n", - ocpdev->def->index); - return -ENODEV; - } - /* Get the MAL device */ - maldev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_MAL, emacdata->mal_idx); - if (maldev == NULL) { - printk("No maldev\n"); - return -ENODEV; - } - /* - * Get MAL driver data, it must be here due to link order. - * When the driver is modularized, symbol dependencies will - * ensure the MAL driver is already present if built as a - * module. - */ - mal = (struct ibm_ocp_mal *)ocp_get_drvdata(maldev); - if (mal == NULL) { - printk("No maldrv\n"); - return -ENODEV; - } + if (dev->phy.address >= 0) + printk("%s: found %s PHY (0x%02x)\n", ndev->name, + dev->phy.def->name, dev->phy.address); - /* If we depend on another EMAC for MDIO, wait for it to show up */ - if (emacdata->mdio_idx >= 0 && - (emacdata->mdio_idx != ocpdev->def->index) && !mdio_ndev) { - struct emac_def_dev *ddev; - /* Add this index to the deferred init table */ - ddev = kmalloc(sizeof(struct emac_def_dev), GFP_KERNEL); - ddev->ocpdev = ocpdev; - ddev->mal = mal; - list_add_tail(&ddev->link, &emac_init_list); - } else { - emac_init_device(ocpdev, mal); - } + emac_dbg_register(dev->def->index, dev); return 0; + out6: + iounmap((void *)dev->emacp); + out5: + tah_fini(dev->tah_dev); + out4: + rgmii_fini(dev->rgmii_dev, dev->rgmii_input); + out3: + zmii_fini(dev->zmii_dev, dev->zmii_input); + out2: + mal_unregister_commac(dev->mal, &dev->commac); + out: + kfree(ndev); + return err; } -/* Structure for a device driver */ static struct ocp_device_id emac_ids[] = { - {.vendor = OCP_ANY_ID,.function = OCP_FUNC_EMAC}, - {.vendor = OCP_VENDOR_INVALID} + { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC }, + { .vendor = OCP_VENDOR_INVALID} }; static struct ocp_driver emac_driver = { .name = "emac", .id_table = emac_ids, - .probe = emac_probe, .remove = emac_remove, }; static int __init emac_init(void) { - printk(KERN_INFO DRV_NAME ": " DRV_DESC ", version " DRV_VERSION "\n"); - printk(KERN_INFO "Maintained by " DRV_AUTHOR "\n"); + printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); + + DBG(": init" NL); - if (skb_res > 2) { - printk(KERN_WARNING "Invalid skb_res: %d, cropping to 2\n", - skb_res); - skb_res = 2; + if (mal_init()) + return -ENODEV; + + EMAC_CLK_INTERNAL; + if (ocp_register_driver(&emac_driver)) { + EMAC_CLK_EXTERNAL; + ocp_unregister_driver(&emac_driver); + mal_exit(); + return -ENODEV; } + EMAC_CLK_EXTERNAL; - return ocp_register_driver(&emac_driver); + emac_init_debug(); + return 0; } static void __exit emac_exit(void) { + DBG(": exit" NL); ocp_unregister_driver(&emac_driver); + mal_exit(); + emac_fini_debug(); } module_init(emac_init); diff --git a/drivers/net/ibm_emac/ibm_emac_core.h b/drivers/net/ibm_emac/ibm_emac_core.h index 97e6e1ea8c89..e9b44d030ac3 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.h +++ b/drivers/net/ibm_emac/ibm_emac_core.h @@ -1,146 +1,221 @@ /* - * ibm_emac_core.h + * drivers/net/ibm_emac/ibm_emac_core.h * - * Ethernet driver for the built in ethernet on the IBM 405 PowerPC - * processor. + * Driver for PowerPC 4xx on-chip ethernet controller. * - * Armin Kuster akuster@mvista.com - * Sept, 2001 + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Orignial driver - * Johnnie Peters - * jpeters@mvista.com - * - * Copyright 2000 MontaVista Softare Inc. + * Based on original work by + * Armin Kuster + * Johnnie Peters + * Copyright 2000, 2001 MontaVista Softare Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ +#ifndef __IBM_EMAC_CORE_H_ +#define __IBM_EMAC_CORE_H_ -#ifndef _IBM_EMAC_CORE_H_ -#define _IBM_EMAC_CORE_H_ - +#include #include +#include #include -#include /* For phys_addr_t */ #include "ibm_emac.h" #include "ibm_emac_phy.h" -#include "ibm_emac_rgmii.h" #include "ibm_emac_zmii.h" +#include "ibm_emac_rgmii.h" #include "ibm_emac_mal.h" #include "ibm_emac_tah.h" -#ifndef CONFIG_IBM_EMAC_TXB -#define NUM_TX_BUFF 64 -#define NUM_RX_BUFF 64 -#else -#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB -#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB -#endif +#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB +#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB -/* This does 16 byte alignment, exactly what we need. - * The packet length includes FCS, but we don't want to - * include that when passing upstream as it messes up - * bridging applications. - */ -#ifndef CONFIG_IBM_EMAC_SKBRES -#define SKB_RES 2 -#else -#define SKB_RES CONFIG_IBM_EMAC_SKBRES +/* Simple sanity check */ +#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 +#error Invalid number of buffer descriptors (greater than 256) #endif -/* Note about alignement. alloc_skb() returns a cache line - * aligned buffer. However, dev_alloc_skb() will add 16 more - * bytes and "reserve" them, so our buffer will actually end - * on a half cache line. What we do is to use directly - * alloc_skb, allocate 16 more bytes to match the total amount - * allocated by dev_alloc_skb(), but we don't reserve. +// XXX +#define EMAC_MIN_MTU 46 +#define EMAC_MAX_MTU 9000 + +/* Maximum L2 header length (VLAN tagged, no FCS) */ +#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) + +/* RX BD size for the given MTU */ +static inline int emac_rx_size(int mtu) +{ + if (mtu > ETH_DATA_LEN) + return MAL_MAX_RX_SIZE; + else + return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); +} + +#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) + +#define EMAC_RX_SKB_HEADROOM \ + EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM) + +/* Size of RX skb for the given MTU */ +static inline int emac_rx_skb_size(int mtu) +{ + int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); + return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; +} + +/* RX DMA sync size */ +static inline int emac_rx_sync_size(int mtu) +{ + return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); +} + +/* Driver statistcs is split into two parts to make it more cache friendly: + * - normal statistics (packet count, etc) + * - error statistics + * + * When statistics is requested by ethtool, these parts are concatenated, + * normal one goes first. + * + * Please, keep these structures in sync with emac_stats_keys. */ -#define MAX_NUM_BUF_DESC 255 -#define DESC_BUF_SIZE 4080 /* max 4096-16 */ -#define DESC_BUF_SIZE_REG (DESC_BUF_SIZE / 16) - -/* Transmitter timeout. */ -#define TX_TIMEOUT (2*HZ) - -/* MDIO latency delay */ -#define MDIO_DELAY 250 - -/* Power managment shift registers */ -#define IBM_CPM_EMMII 0 /* Shift value for MII */ -#define IBM_CPM_EMRX 1 /* Shift value for recv */ -#define IBM_CPM_EMTX 2 /* Shift value for MAC */ -#define IBM_CPM_EMAC(x) (((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX)) - -#define ENET_HEADER_SIZE 14 -#define ENET_FCS_SIZE 4 -#define ENET_DEF_MTU_SIZE 1500 -#define ENET_DEF_BUF_SIZE (ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE) -#define EMAC_MIN_FRAME 64 -#define EMAC_MAX_FRAME 9018 -#define EMAC_MIN_MTU (EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE) -#define EMAC_MAX_MTU (EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE) - -#ifdef CONFIG_IBM_EMAC_ERRMSG -void emac_serr_dump_0(struct net_device *dev); -void emac_serr_dump_1(struct net_device *dev); -void emac_err_dump(struct net_device *dev, int em0isr); -void emac_phy_dump(struct net_device *); -void emac_desc_dump(struct net_device *); -void emac_mac_dump(struct net_device *); -void emac_mal_dump(struct net_device *); -#else -#define emac_serr_dump_0(dev) do { } while (0) -#define emac_serr_dump_1(dev) do { } while (0) -#define emac_err_dump(dev,x) do { } while (0) -#define emac_phy_dump(dev) do { } while (0) -#define emac_desc_dump(dev) do { } while (0) -#define emac_mac_dump(dev) do { } while (0) -#define emac_mal_dump(dev) do { } while (0) -#endif + +/* Normal TX/RX Statistics */ +struct ibm_emac_stats { + u64 rx_packets; + u64 rx_bytes; + u64 tx_packets; + u64 tx_bytes; + u64 rx_packets_csum; + u64 tx_packets_csum; +}; + +/* Error statistics */ +struct ibm_emac_error_stats { + u64 tx_undo; + + /* Software RX Errors */ + u64 rx_dropped_stack; + u64 rx_dropped_oom; + u64 rx_dropped_error; + u64 rx_dropped_resize; + u64 rx_dropped_mtu; + u64 rx_stopped; + /* BD reported RX errors */ + u64 rx_bd_errors; + u64 rx_bd_overrun; + u64 rx_bd_bad_packet; + u64 rx_bd_runt_packet; + u64 rx_bd_short_event; + u64 rx_bd_alignment_error; + u64 rx_bd_bad_fcs; + u64 rx_bd_packet_too_long; + u64 rx_bd_out_of_range; + u64 rx_bd_in_range; + /* EMAC IRQ reported RX errors */ + u64 rx_parity; + u64 rx_fifo_overrun; + u64 rx_overrun; + u64 rx_bad_packet; + u64 rx_runt_packet; + u64 rx_short_event; + u64 rx_alignment_error; + u64 rx_bad_fcs; + u64 rx_packet_too_long; + u64 rx_out_of_range; + u64 rx_in_range; + + /* Software TX Errors */ + u64 tx_dropped; + /* BD reported TX errors */ + u64 tx_bd_errors; + u64 tx_bd_bad_fcs; + u64 tx_bd_carrier_loss; + u64 tx_bd_excessive_deferral; + u64 tx_bd_excessive_collisions; + u64 tx_bd_late_collision; + u64 tx_bd_multple_collisions; + u64 tx_bd_single_collision; + u64 tx_bd_underrun; + u64 tx_bd_sqe; + /* EMAC IRQ reported TX errors */ + u64 tx_parity; + u64 tx_underrun; + u64 tx_sqe; + u64 tx_errors; +}; + +#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \ + sizeof(struct ibm_emac_error_stats)) \ + / sizeof(u64)) struct ocp_enet_private { - struct sk_buff *tx_skb[NUM_TX_BUFF]; - struct sk_buff *rx_skb[NUM_RX_BUFF]; - struct mal_descriptor *tx_desc; - struct mal_descriptor *rx_desc; - struct mal_descriptor *rx_dirty; - struct net_device_stats stats; - int tx_cnt; - int rx_slot; - int dirty_rx; - int tx_slot; - int ack_slot; - int rx_buffer_size; - - struct mii_phy phy_mii; - int mii_phy_addr; - int want_autoneg; - int timer_ticks; - struct timer_list link_timer; - struct net_device *mdio_dev; - - struct ocp_device *rgmii_dev; - int rgmii_input; - - struct ocp_device *zmii_dev; - int zmii_input; - - struct ibm_ocp_mal *mal; - int mal_tx_chan, mal_rx_chan; - struct mal_commac commac; - - struct ocp_device *tah_dev; - - int opened; - int going_away; - int wol_irq; - emac_t *emacp; - struct ocp_device *ocpdev; - struct net_device *ndev; - spinlock_t lock; + struct net_device *ndev; /* 0 */ + struct emac_regs *emacp; + + struct mal_descriptor *tx_desc; + int tx_cnt; + int tx_slot; + int ack_slot; + + struct mal_descriptor *rx_desc; + int rx_slot; + struct sk_buff *rx_sg_skb; /* 1 */ + int rx_skb_size; + int rx_sync_size; + + struct ibm_emac_stats stats; + struct ocp_device *tah_dev; + + struct ibm_ocp_mal *mal; + struct mal_commac commac; + + struct sk_buff *tx_skb[NUM_TX_BUFF]; + struct sk_buff *rx_skb[NUM_RX_BUFF]; + + struct ocp_device *zmii_dev; + int zmii_input; + struct ocp_enet_private *mdio_dev; + struct ocp_device *rgmii_dev; + int rgmii_input; + + struct ocp_def *def; + + struct mii_phy phy; + struct timer_list link_timer; + int reset_failed; + + struct ibm_emac_error_stats estats; + struct net_device_stats nstats; + + struct device* ldev; }; -#endif /* _IBM_EMAC_CORE_H_ */ + +/* Ethtool get_regs complex data. + * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH + * when available. + * + * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, + * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. + * Each register component is preceded with emac_ethtool_regs_subhdr. + * Order of the optional headers follows their relative bit posititions + * in emac_ethtool_regs_hdr.components + */ +#define EMAC_ETHTOOL_REGS_ZMII 0x00000001 +#define EMAC_ETHTOOL_REGS_RGMII 0x00000002 +#define EMAC_ETHTOOL_REGS_TAH 0x00000004 + +struct emac_ethtool_regs_hdr { + u32 components; +}; + +struct emac_ethtool_regs_subhdr { + u32 version; + u32 index; +}; + +#endif /* __IBM_EMAC_CORE_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_debug.c b/drivers/net/ibm_emac/ibm_emac_debug.c index c8512046cf84..75d3b8639041 100644 --- a/drivers/net/ibm_emac/ibm_emac_debug.c +++ b/drivers/net/ibm_emac/ibm_emac_debug.c @@ -1,224 +1,213 @@ /* - * ibm_ocp_debug.c + * drivers/net/ibm_emac/ibm_emac_debug.c * - * This has all the debug routines that where in *_enet.c + * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. * - * Armin Kuster akuster@mvista.com - * April , 2002 - * - * Copyright 2002 MontaVista Softare Inc. + * Copyright (c) 2004, 2005 Zultys Technologies + * Eugene Surovegin or * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ - #include +#include +#include #include #include +#include #include -#include "ibm_ocp_mal.h" -#include "ibm_ocp_zmii.h" -#include "ibm_ocp_enet.h" -extern int emac_phy_read(struct net_device *dev, int mii_id, int reg); +#include "ibm_emac_core.h" + +static void emac_desc_dump(int idx, struct ocp_enet_private *p) +{ + int i; + printk("** EMAC%d TX BDs **\n" + " tx_cnt = %d tx_slot = %d ack_slot = %d\n", + idx, p->tx_cnt, p->tx_slot, p->ack_slot); + for (i = 0; i < NUM_TX_BUFF / 2; ++i) + printk + ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", + i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ', + p->tx_desc[i].ctrl, p->tx_desc[i].data_len, + NUM_TX_BUFF / 2 + i, + p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr, + p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ', + p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl, + p->tx_desc[NUM_TX_BUFF / 2 + i].data_len); + + printk("** EMAC%d RX BDs **\n" + " rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n" + " rx_sg_skb = 0x%p\n", + idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size, + p->rx_sync_size, p->rx_sg_skb); + for (i = 0; i < NUM_RX_BUFF / 2; ++i) + printk + ("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n", + i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ', + p->rx_desc[i].ctrl, p->rx_desc[i].data_len, + NUM_RX_BUFF / 2 + i, + p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr, + p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ', + p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl, + p->rx_desc[NUM_RX_BUFF / 2 + i].data_len); +} + +static void emac_mac_dump(int idx, struct ocp_enet_private *dev) +{ + struct emac_regs *p = dev->emacp; + + printk("** EMAC%d registers **\n" + "MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n" + "RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n" + "IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n" + "IAHT: 0x%04x 0x%04x 0x%04x 0x%04x " + "GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n" + "LSA = %04x%08x IPGVR = 0x%04x\n" + "STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n" + "OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n", + idx, in_be32(&p->mr0), in_be32(&p->mr1), + in_be32(&p->tmr0), in_be32(&p->tmr1), + in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser), + in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid), + in_be32(&p->vtci), + in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3), + in_be32(&p->iaht4), + in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3), + in_be32(&p->gaht4), + in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr), + in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr), + in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr) + ); + + emac_desc_dump(idx, dev); +} + +static void emac_mal_dump(struct ibm_ocp_mal *mal) +{ + struct ocp_func_mal_data *maldata = mal->def->additions; + int i; + + printk("** MAL%d Registers **\n" + "CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n" + "TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n" + "RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n", + mal->def->index, + get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR), + get_mal_dcrn(mal, MAL_IER), + get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR), + get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR), + get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR), + get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR) + ); + + printk("TX|"); + for (i = 0; i < maldata->num_tx_chans; ++i) { + if (i && !(i % 4)) + printk("\n "); + printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i))); + } + printk("\nRX|"); + for (i = 0; i < maldata->num_rx_chans; ++i) { + if (i && !(i % 4)) + printk("\n "); + printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i))); + } + printk("\n "); + for (i = 0; i < maldata->num_rx_chans; ++i) { + u32 r = get_mal_dcrn(mal, MAL_RCBS(i)); + if (i && !(i % 3)) + printk("\n "); + printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16); + } + printk("\n"); +} + +static struct ocp_enet_private *__emacs[4]; +static struct ibm_ocp_mal *__mals[1]; -void emac_phy_dump(struct net_device *dev) +void emac_dbg_register(int idx, struct ocp_enet_private *dev) { - struct ocp_enet_private *fep = dev->priv; - unsigned long i; - uint data; - - printk(KERN_DEBUG " Prepare for Phy dump....\n"); - for (i = 0; i < 0x1A; i++) { - data = emac_phy_read(dev, fep->mii_phy_addr, i); - printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data); - if (i == 0x07) - i = 0x0f; + unsigned long flags; + + if (idx >= sizeof(__emacs) / sizeof(__emacs[0])) { + printk(KERN_WARNING + "invalid index %d when registering EMAC for debugging\n", + idx); + return; } + + local_irq_save(flags); + __emacs[idx] = dev; + local_irq_restore(flags); } -void emac_desc_dump(struct net_device *dev) +void mal_dbg_register(int idx, struct ibm_ocp_mal *mal) { - struct ocp_enet_private *fep = dev->priv; - int curr_slot; - - printk(KERN_DEBUG - "dumping the receive descriptors: current slot is %d\n", - fep->rx_slot); - for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) { - printk(KERN_DEBUG - "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n", - curr_slot, fep->rx_desc[curr_slot].ctrl, - fep->rx_desc[curr_slot].data_len, - (unsigned int)fep->rx_desc[curr_slot].data_ptr); + unsigned long flags; + + if (idx >= sizeof(__mals) / sizeof(__mals[0])) { + printk(KERN_WARNING + "invalid index %d when registering MAL for debugging\n", + idx); + return; } + + local_irq_save(flags); + __mals[idx] = mal; + local_irq_restore(flags); } -void emac_mac_dump(struct net_device *dev) +void emac_dbg_dump_all(void) { - struct ocp_enet_private *fep = dev->priv; - volatile emac_t *emacp = fep->emacp; - - printk(KERN_DEBUG "EMAC DEBUG ********** \n"); - printk(KERN_DEBUG "EMAC_M0 ==> 0x%x\n", in_be32(&emacp->em0mr0)); - printk(KERN_DEBUG "EMAC_M1 ==> 0x%x\n", in_be32(&emacp->em0mr1)); - printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0)); - printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1)); - printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr)); - printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr)); - printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser)); - printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr)); - printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr)); - printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n", - in_be32(&emacp->em0vtpid)); + unsigned int i; + unsigned long flags; + + local_irq_save(flags); + + for (i = 0; i < sizeof(__mals) / sizeof(__mals[0]); ++i) + if (__mals[i]) + emac_mal_dump(__mals[i]); + + for (i = 0; i < sizeof(__emacs) / sizeof(__emacs[0]); ++i) + if (__emacs[i]) + emac_mac_dump(i, __emacs[i]); + + local_irq_restore(flags); } -void emac_mal_dump(struct net_device *dev) +#if defined(CONFIG_MAGIC_SYSRQ) +static void emac_sysrq_handler(int key, struct pt_regs *pt_regs, + struct tty_struct *tty) { - struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; - - printk(KERN_DEBUG " MAL DEBUG ********** \n"); - printk(KERN_DEBUG " MCR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALCR)); - printk(KERN_DEBUG " ESR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALESR)); - printk(KERN_DEBUG " IER ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALIER)); -#ifdef CONFIG_40x - printk(KERN_DEBUG " DBR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALDBR)); -#endif /* CONFIG_40x */ - printk(KERN_DEBUG " TXCASR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCASR)); - printk(KERN_DEBUG " TXCARR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCARR)); - printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXEOBISR)); - printk(KERN_DEBUG " TXDEIR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXDEIR)); - printk(KERN_DEBUG " RXCASR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCASR)); - printk(KERN_DEBUG " RXCARR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCARR)); - printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXEOBISR)); - printk(KERN_DEBUG " RXDEIR ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXDEIR)); - printk(KERN_DEBUG " TXCTP0R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP0R)); - printk(KERN_DEBUG " TXCTP1R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP1R)); - printk(KERN_DEBUG " TXCTP2R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP2R)); - printk(KERN_DEBUG " TXCTP3R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALTXCTP3R)); - printk(KERN_DEBUG " RXCTP0R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP0R)); - printk(KERN_DEBUG " RXCTP1R ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRXCTP1R)); - printk(KERN_DEBUG " RCBS0 ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS0)); - printk(KERN_DEBUG " RCBS1 ==> 0x%x\n", - (unsigned int)get_mal_dcrn(mal, DCRN_MALRCBS1)); + emac_dbg_dump_all(); } -void emac_serr_dump_0(struct net_device *dev) +static struct sysrq_key_op emac_sysrq_op = { + .handler = emac_sysrq_handler, + .help_msg = "emaC", + .action_msg = "Show EMAC(s) status", +}; + +int __init emac_init_debug(void) { - struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; - unsigned long int mal_error, plb_error, plb_addr; - - mal_error = get_mal_dcrn(mal, DCRN_MALESR); - printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n", - (mal_error & 0x40000000) ? "Receive" : - "Transmit", (mal_error & 0x3e000000) >> 25); - printk(KERN_DEBUG " ----- latched error -----\n"); - if (mal_error & MALESR_DE) - printk(KERN_DEBUG " DE: descriptor error\n"); - if (mal_error & MALESR_OEN) - printk(KERN_DEBUG " ONE: OPB non-fullword error\n"); - if (mal_error & MALESR_OTE) - printk(KERN_DEBUG " OTE: OPB timeout error\n"); - if (mal_error & MALESR_OSE) - printk(KERN_DEBUG " OSE: OPB slave error\n"); - - if (mal_error & MALESR_PEIN) { - plb_error = mfdcr(DCRN_PLB0_BESR); - printk(KERN_DEBUG - " PEIN: PLB error, PLB0_BESR is 0x%x\n", - (unsigned int)plb_error); - plb_addr = mfdcr(DCRN_PLB0_BEAR); - printk(KERN_DEBUG - " PEIN: PLB error, PLB0_BEAR is 0x%x\n", - (unsigned int)plb_addr); - } + return register_sysrq_key('c', &emac_sysrq_op); } -void emac_serr_dump_1(struct net_device *dev) +void __exit emac_fini_debug(void) { - struct ibm_ocp_mal *mal = ((struct ocp_enet_private *)dev->priv)->mal; - int mal_error = get_mal_dcrn(mal, DCRN_MALESR); - - printk(KERN_DEBUG " ----- cumulative errors -----\n"); - if (mal_error & MALESR_DEI) - printk(KERN_DEBUG " DEI: descriptor error interrupt\n"); - if (mal_error & MALESR_ONEI) - printk(KERN_DEBUG " OPB non-fullword error interrupt\n"); - if (mal_error & MALESR_OTEI) - printk(KERN_DEBUG " OTEI: timeout error interrupt\n"); - if (mal_error & MALESR_OSEI) - printk(KERN_DEBUG " OSEI: slave error interrupt\n"); - if (mal_error & MALESR_PBEI) - printk(KERN_DEBUG " PBEI: PLB bus error interrupt\n"); + unregister_sysrq_key('c', &emac_sysrq_op); } -void emac_err_dump(struct net_device *dev, int em0isr) +#else +int __init emac_init_debug(void) +{ + return 0; +} +void __exit emac_fini_debug(void) { - printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name); - - if (em0isr & EMAC_ISR_OVR) - printk(KERN_DEBUG " OVR: overrun\n"); - if (em0isr & EMAC_ISR_PP) - printk(KERN_DEBUG " PP: control pause packet\n"); - if (em0isr & EMAC_ISR_BP) - printk(KERN_DEBUG " BP: packet error\n"); - if (em0isr & EMAC_ISR_RP) - printk(KERN_DEBUG " RP: runt packet\n"); - if (em0isr & EMAC_ISR_SE) - printk(KERN_DEBUG " SE: short event\n"); - if (em0isr & EMAC_ISR_ALE) - printk(KERN_DEBUG " ALE: odd number of nibbles in packet\n"); - if (em0isr & EMAC_ISR_BFCS) - printk(KERN_DEBUG " BFCS: bad FCS\n"); - if (em0isr & EMAC_ISR_PTLE) - printk(KERN_DEBUG " PTLE: oversized packet\n"); - if (em0isr & EMAC_ISR_ORE) - printk(KERN_DEBUG - " ORE: packet length field > max allowed LLC\n"); - if (em0isr & EMAC_ISR_IRE) - printk(KERN_DEBUG " IRE: In Range error\n"); - if (em0isr & EMAC_ISR_DBDM) - printk(KERN_DEBUG " DBDM: xmit error or SQE\n"); - if (em0isr & EMAC_ISR_DB0) - printk(KERN_DEBUG " DB0: xmit error or SQE on TX channel 0\n"); - if (em0isr & EMAC_ISR_SE0) - printk(KERN_DEBUG - " SE0: Signal Quality Error test failure from TX channel 0\n"); - if (em0isr & EMAC_ISR_TE0) - printk(KERN_DEBUG " TE0: xmit channel 0 aborted\n"); - if (em0isr & EMAC_ISR_DB1) - printk(KERN_DEBUG " DB1: xmit error or SQE on TX channel \n"); - if (em0isr & EMAC_ISR_SE1) - printk(KERN_DEBUG - " SE1: Signal Quality Error test failure from TX channel 1\n"); - if (em0isr & EMAC_ISR_TE1) - printk(KERN_DEBUG " TE1: xmit channel 1 aborted\n"); - if (em0isr & EMAC_ISR_MOS) - printk(KERN_DEBUG " MOS\n"); - if (em0isr & EMAC_ISR_MOF) - printk(KERN_DEBUG " MOF\n"); - - emac_mac_dump(dev); - emac_mal_dump(dev); } +#endif /* CONFIG_MAGIC_SYSRQ */ diff --git a/drivers/net/ibm_emac/ibm_emac_debug.h b/drivers/net/ibm_emac/ibm_emac_debug.h new file mode 100644 index 000000000000..e85fbe0a8da9 --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_debug.h @@ -0,0 +1,63 @@ +/* + * drivers/net/ibm_emac/ibm_ocp_debug.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines. + * + * Copyright (c) 2004, 2005 Zultys Technologies + * Eugene Surovegin or + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_EMAC_DEBUG_H_ +#define __IBM_EMAC_DEBUG_H_ + +#include +#include +#include "ibm_emac_core.h" +#include "ibm_emac_mal.h" + +#if defined(CONFIG_IBM_EMAC_DEBUG) +void emac_dbg_register(int idx, struct ocp_enet_private *dev); +void mal_dbg_register(int idx, struct ibm_ocp_mal *mal); +int emac_init_debug(void) __init; +void emac_fini_debug(void) __exit; +void emac_dbg_dump_all(void); +# define DBG_LEVEL 1 +#else +# define emac_dbg_register(x,y) ((void)0) +# define mal_dbg_register(x,y) ((void)0) +# define emac_init_debug() ((void)0) +# define emac_fini_debug() ((void)0) +# define emac_dbg_dump_all() ((void)0) +# define DBG_LEVEL 0 +#endif + +#if DBG_LEVEL > 0 +# define DBG(f,x...) printk("emac" f, ##x) +# define MAL_DBG(f,x...) printk("mal" f, ##x) +# define ZMII_DBG(f,x...) printk("zmii" f, ##x) +# define RGMII_DBG(f,x...) printk("rgmii" f, ##x) +# define NL "\n" +#else +# define DBG(f,x...) ((void)0) +# define MAL_DBG(f,x...) ((void)0) +# define ZMII_DBG(f,x...) ((void)0) +# define RGMII_DBG(f,x...) ((void)0) +#endif +#if DBG_LEVEL > 1 +# define DBG2(f,x...) DBG(f, ##x) +# define MAL_DBG2(f,x...) MAL_DBG(f, ##x) +# define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x) +# define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x) +#else +# define DBG2(f,x...) ((void)0) +# define MAL_DBG2(f,x...) ((void)0) +# define ZMII_DBG2(f,x...) ((void)0) +# define RGMII_DBG2(f,x...) ((void)0) +#endif + +#endif /* __IBM_EMAC_DEBUG_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c index e59f57f363ca..da88d43081cc 100644 --- a/drivers/net/ibm_emac/ibm_emac_mal.c +++ b/drivers/net/ibm_emac/ibm_emac_mal.c @@ -1,436 +1,565 @@ /* - * ibm_ocp_mal.c + * drivers/net/ibm_emac/ibm_emac_mal.c * - * Armin Kuster akuster@mvista.com - * Juen, 2002 + * Memory Access Layer (MAL) support + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Copyright 2002 MontaVista Softare Inc. + * Based on original work by + * Benjamin Herrenschmidt , + * David Gibson , + * + * Armin Kuster + * Copyright 2002 MontaVista Softare Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ - #include #include #include #include #include #include +#include #include -#include -#include #include +#include "ibm_emac_core.h" #include "ibm_emac_mal.h" +#include "ibm_emac_debug.h" -// Locking: Should we share a lock with the client ? The client could provide -// a lock pointer (optionally) in the commac structure... I don't think this is -// really necessary though - -/* This lock protects the commac list. On today UP implementations, it's - * really only used as IRQ protection in mal_{register,unregister}_commac() - */ -static DEFINE_RWLOCK(mal_list_lock); - -int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) +int __init mal_register_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac) { unsigned long flags; + local_irq_save(flags); - write_lock_irqsave(&mal_list_lock, flags); + MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index, + commac->tx_chan_mask, commac->rx_chan_mask); - /* Don't let multiple commacs claim the same channel */ + /* Don't let multiple commacs claim the same channel(s) */ if ((mal->tx_chan_mask & commac->tx_chan_mask) || (mal->rx_chan_mask & commac->rx_chan_mask)) { - write_unlock_irqrestore(&mal_list_lock, flags); + local_irq_restore(flags); + printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n", + mal->def->index); return -EBUSY; } mal->tx_chan_mask |= commac->tx_chan_mask; mal->rx_chan_mask |= commac->rx_chan_mask; + list_add(&commac->list, &mal->list); - list_add(&commac->list, &mal->commac); - - write_unlock_irqrestore(&mal_list_lock, flags); - + local_irq_restore(flags); return 0; } -int mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) +void __exit mal_unregister_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac) { unsigned long flags; + local_irq_save(flags); - write_lock_irqsave(&mal_list_lock, flags); + MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index, + commac->tx_chan_mask, commac->rx_chan_mask); mal->tx_chan_mask &= ~commac->tx_chan_mask; mal->rx_chan_mask &= ~commac->rx_chan_mask; - list_del_init(&commac->list); - write_unlock_irqrestore(&mal_list_lock, flags); - - return 0; + local_irq_restore(flags); } int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size) { - switch (channel) { - case 0: - set_mal_dcrn(mal, DCRN_MALRCBS0, size); - break; -#ifdef DCRN_MALRCBS1 - case 1: - set_mal_dcrn(mal, DCRN_MALRCBS1, size); - break; -#endif -#ifdef DCRN_MALRCBS2 - case 2: - set_mal_dcrn(mal, DCRN_MALRCBS2, size); - break; -#endif -#ifdef DCRN_MALRCBS3 - case 3: - set_mal_dcrn(mal, DCRN_MALRCBS3, size); - break; -#endif - default: + struct ocp_func_mal_data *maldata = mal->def->additions; + BUG_ON(channel < 0 || channel >= maldata->num_rx_chans || + size > MAL_MAX_RX_SIZE); + + MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size); + + if (size & 0xf) { + printk(KERN_WARNING + "mal%d: incorrect RX size %lu for the channel %d\n", + mal->def->index, size, channel); return -EINVAL; } + set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4); return 0; } -static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs) +int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel) { - struct ibm_ocp_mal *mal = dev_instance; - unsigned long mal_error; + struct ocp_func_mal_data *maldata = mal->def->additions; + BUG_ON(channel < 0 || channel >= maldata->num_tx_chans); + return channel * NUM_TX_BUFF; +} - /* - * This SERR applies to one of the devices on the MAL, here we charge - * it against the first EMAC registered for the MAL. - */ +int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel) +{ + struct ocp_func_mal_data *maldata = mal->def->additions; + BUG_ON(channel < 0 || channel >= maldata->num_rx_chans); + return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF; +} - mal_error = get_mal_dcrn(mal, DCRN_MALESR); +void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel) +{ + local_bh_disable(); + MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel); + set_mal_dcrn(mal, MAL_TXCASR, + get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel)); + local_bh_enable(); +} - printk(KERN_ERR "%s: System Error (MALESR=%lx)\n", - "MAL" /* FIXME: get the name right */ , mal_error); +void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel) +{ + set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel)); + MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel); +} - /* FIXME: decipher error */ - /* DIXME: distribute to commacs, if possible */ +void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel) +{ + local_bh_disable(); + MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel); + set_mal_dcrn(mal, MAL_RXCASR, + get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel)); + local_bh_enable(); +} - /* Clear the error status register */ - set_mal_dcrn(mal, DCRN_MALESR, mal_error); +void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel) +{ + set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel)); + MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel); +} - return IRQ_HANDLED; +void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac) +{ + local_bh_disable(); + MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac); + list_add_tail(&commac->poll_list, &mal->poll_list); + local_bh_enable(); } -static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs) +void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac) +{ + local_bh_disable(); + MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac); + list_del(&commac->poll_list); + local_bh_enable(); +} + +/* synchronized by mal_poll() */ +static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal) +{ + MAL_DBG2("%d: enable_irq" NL, mal->def->index); + set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE); +} + +/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */ +static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal) +{ + set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE); + MAL_DBG2("%d: disable_irq" NL, mal->def->index); +} + +static irqreturn_t mal_serr(int irq, void *dev_instance, struct pt_regs *regs) { struct ibm_ocp_mal *mal = dev_instance; - struct list_head *l; - unsigned long isr; + u32 esr = get_mal_dcrn(mal, MAL_ESR); - isr = get_mal_dcrn(mal, DCRN_MALTXEOBISR); - set_mal_dcrn(mal, DCRN_MALTXEOBISR, isr); + /* Clear the error status register */ + set_mal_dcrn(mal, MAL_ESR, esr); - read_lock(&mal_list_lock); - list_for_each(l, &mal->commac) { - struct mal_commac *mc = list_entry(l, struct mal_commac, list); + MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr); - if (isr & mc->tx_chan_mask) { - mc->ops->txeob(mc->dev, isr & mc->tx_chan_mask); + if (esr & MAL_ESR_EVB) { + if (esr & MAL_ESR_DE) { + /* We ignore Descriptor error, + * TXDE or RXDE interrupt will be generated anyway. + */ + return IRQ_HANDLED; } + + if (esr & MAL_ESR_PEIN) { + /* PLB error, it's probably buggy hardware or + * incorrect physical address in BD (i.e. bug) + */ + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: system error, PLB (ESR = 0x%08x)\n", + mal->def->index, esr); + return IRQ_HANDLED; + } + + /* OPB error, it's probably buggy hardware or incorrect EBC setup */ + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: system error, OPB (ESR = 0x%08x)\n", + mal->def->index, esr); } - read_unlock(&mal_list_lock); + return IRQ_HANDLED; +} + +static inline void mal_schedule_poll(struct ibm_ocp_mal *mal) +{ + if (likely(netif_rx_schedule_prep(&mal->poll_dev))) { + MAL_DBG2("%d: schedule_poll" NL, mal->def->index); + mal_disable_eob_irq(mal); + __netif_rx_schedule(&mal->poll_dev); + } else + MAL_DBG2("%d: already in poll" NL, mal->def->index); +} +static irqreturn_t mal_txeob(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + u32 r = get_mal_dcrn(mal, MAL_TXEOBISR); + MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r); + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_TXEOBISR, r); return IRQ_HANDLED; } static irqreturn_t mal_rxeob(int irq, void *dev_instance, struct pt_regs *regs) { struct ibm_ocp_mal *mal = dev_instance; - struct list_head *l; - unsigned long isr; + u32 r = get_mal_dcrn(mal, MAL_RXEOBISR); + MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r); + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_RXEOBISR, r); + return IRQ_HANDLED; +} - isr = get_mal_dcrn(mal, DCRN_MALRXEOBISR); - set_mal_dcrn(mal, DCRN_MALRXEOBISR, isr); +static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ibm_ocp_mal *mal = dev_instance; + u32 deir = get_mal_dcrn(mal, MAL_TXDEIR); + set_mal_dcrn(mal, MAL_TXDEIR, deir); - read_lock(&mal_list_lock); - list_for_each(l, &mal->commac) { - struct mal_commac *mc = list_entry(l, struct mal_commac, list); + MAL_DBG("%d: txde %08x" NL, mal->def->index, deir); - if (isr & mc->rx_chan_mask) { - mc->ops->rxeob(mc->dev, isr & mc->rx_chan_mask); - } - } - read_unlock(&mal_list_lock); + if (net_ratelimit()) + printk(KERN_ERR + "mal%d: TX descriptor error (TXDEIR = 0x%08x)\n", + mal->def->index, deir); return IRQ_HANDLED; } -static irqreturn_t mal_txde(int irq, void *dev_instance, struct pt_regs *regs) +static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs) { struct ibm_ocp_mal *mal = dev_instance; struct list_head *l; - unsigned long deir; + u32 deir = get_mal_dcrn(mal, MAL_RXDEIR); - deir = get_mal_dcrn(mal, DCRN_MALTXDEIR); + MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir); - /* FIXME: print which MAL correctly */ - printk(KERN_WARNING "%s: Tx descriptor error (MALTXDEIR=%lx)\n", - "MAL", deir); - - read_lock(&mal_list_lock); - list_for_each(l, &mal->commac) { + list_for_each(l, &mal->list) { struct mal_commac *mc = list_entry(l, struct mal_commac, list); - - if (deir & mc->tx_chan_mask) { - mc->ops->txde(mc->dev, deir & mc->tx_chan_mask); + if (deir & mc->rx_chan_mask) { + mc->rx_stopped = 1; + mc->ops->rxde(mc->dev); } } - read_unlock(&mal_list_lock); + + mal_schedule_poll(mal); + set_mal_dcrn(mal, MAL_RXDEIR, deir); return IRQ_HANDLED; } -/* - * This interrupt should be very rare at best. This occurs when - * the hardware has a problem with the receive descriptors. The manual - * states that it occurs when the hardware cannot the receive descriptor - * empty bit is not set. The recovery mechanism will be to - * traverse through the descriptors, handle any that are marked to be - * handled and reinitialize each along the way. At that point the driver - * will be restarted. - */ -static irqreturn_t mal_rxde(int irq, void *dev_instance, struct pt_regs *regs) +static int mal_poll(struct net_device *ndev, int *budget) { - struct ibm_ocp_mal *mal = dev_instance; + struct ibm_ocp_mal *mal = ndev->priv; struct list_head *l; - unsigned long deir; - - deir = get_mal_dcrn(mal, DCRN_MALRXDEIR); + int rx_work_limit = min(ndev->quota, *budget), received = 0, done; + + MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget, + rx_work_limit); + again: + /* Process TX skbs */ + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + mc->ops->poll_tx(mc->dev); + } - /* - * This really is needed. This case encountered in stress testing. + /* Process RX skbs. + * We _might_ need something more smart here to enforce polling fairness. */ - if (deir == 0) - return IRQ_HANDLED; - - /* FIXME: print which MAL correctly */ - printk(KERN_WARNING "%s: Rx descriptor error (MALRXDEIR=%lx)\n", - "MAL", deir); - - read_lock(&mal_list_lock); - list_for_each(l, &mal->commac) { - struct mal_commac *mc = list_entry(l, struct mal_commac, list); + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + int n = mc->ops->poll_rx(mc->dev, rx_work_limit); + if (n) { + received += n; + rx_work_limit -= n; + if (rx_work_limit <= 0) { + done = 0; + goto more_work; // XXX What if this is the last one ? + } + } + } - if (deir & mc->rx_chan_mask) { - mc->ops->rxde(mc->dev, deir & mc->rx_chan_mask); + /* We need to disable IRQs to protect from RXDE IRQ here */ + local_irq_disable(); + __netif_rx_complete(ndev); + mal_enable_eob_irq(mal); + local_irq_enable(); + + done = 1; + + /* Check for "rotting" packet(s) */ + list_for_each(l, &mal->poll_list) { + struct mal_commac *mc = + list_entry(l, struct mal_commac, poll_list); + if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) { + MAL_DBG2("%d: rotting packet" NL, mal->def->index); + if (netif_rx_reschedule(ndev, received)) + mal_disable_eob_irq(mal); + else + MAL_DBG2("%d: already in poll list" NL, + mal->def->index); + + if (rx_work_limit > 0) + goto again; + else + goto more_work; } + mc->ops->poll_tx(mc->dev); } - read_unlock(&mal_list_lock); - return IRQ_HANDLED; + more_work: + ndev->quota -= received; + *budget -= received; + + MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, *budget, + done ? 0 : 1); + return done ? 0 : 1; +} + +static void mal_reset(struct ibm_ocp_mal *mal) +{ + int n = 10; + MAL_DBG("%d: reset" NL, mal->def->index); + + set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR); + + /* Wait for reset to complete (1 system clock) */ + while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n) + --n; + + if (unlikely(!n)) + printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index); +} + +int mal_get_regs_len(struct ibm_ocp_mal *mal) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct ibm_mal_regs); +} + +void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf) +{ + struct emac_ethtool_regs_subhdr *hdr = buf; + struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1); + struct ocp_func_mal_data *maldata = mal->def->additions; + int i; + + hdr->version = MAL_VERSION; + hdr->index = mal->def->index; + + regs->tx_count = maldata->num_tx_chans; + regs->rx_count = maldata->num_rx_chans; + + regs->cfg = get_mal_dcrn(mal, MAL_CFG); + regs->esr = get_mal_dcrn(mal, MAL_ESR); + regs->ier = get_mal_dcrn(mal, MAL_IER); + regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR); + regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR); + regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR); + regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR); + regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR); + regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR); + regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR); + regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR); + + for (i = 0; i < regs->tx_count; ++i) + regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i)); + + for (i = 0; i < regs->rx_count; ++i) { + regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i)); + regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i)); + } + return regs + 1; } static int __init mal_probe(struct ocp_device *ocpdev) { - struct ibm_ocp_mal *mal = NULL; + struct ibm_ocp_mal *mal; struct ocp_func_mal_data *maldata; - int err = 0; + int err = 0, i, bd_size; + + MAL_DBG("%d: probe" NL, ocpdev->def->index); - maldata = (struct ocp_func_mal_data *)ocpdev->def->additions; + maldata = ocpdev->def->additions; if (maldata == NULL) { - printk(KERN_ERR "mal%d: Missing additional datas !\n", + printk(KERN_ERR "mal%d: missing additional data!\n", ocpdev->def->index); return -ENODEV; } - mal = kmalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL); - if (mal == NULL) { + mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL); + if (!mal) { printk(KERN_ERR - "mal%d: Out of memory allocating MAL structure !\n", + "mal%d: out of memory allocating MAL structure!\n", ocpdev->def->index); return -ENOMEM; } - memset(mal, 0, sizeof(*mal)); - - switch (ocpdev->def->index) { - case 0: - mal->dcrbase = DCRN_MAL_BASE; - break; -#ifdef DCRN_MAL1_BASE - case 1: - mal->dcrbase = DCRN_MAL1_BASE; - break; -#endif - default: - BUG(); - } - - /**************************/ + mal->dcrbase = maldata->dcr_base; + mal->def = ocpdev->def; - INIT_LIST_HEAD(&mal->commac); + INIT_LIST_HEAD(&mal->poll_list); + set_bit(__LINK_STATE_START, &mal->poll_dev.state); + mal->poll_dev.weight = CONFIG_IBM_EMAC_POLL_WEIGHT; + mal->poll_dev.poll = mal_poll; + mal->poll_dev.priv = mal; + atomic_set(&mal->poll_dev.refcnt, 1); - set_mal_dcrn(mal, DCRN_MALRXCARR, 0xFFFFFFFF); - set_mal_dcrn(mal, DCRN_MALTXCARR, 0xFFFFFFFF); + INIT_LIST_HEAD(&mal->list); - set_mal_dcrn(mal, DCRN_MALCR, MALCR_MMSR); /* 384 */ - /* FIXME: Add delay */ + /* Load power-on reset defaults */ + mal_reset(mal); /* Set the MAL configuration register */ - set_mal_dcrn(mal, DCRN_MALCR, - MALCR_PLBB | MALCR_OPBBL | MALCR_LEA | - MALCR_PLBLT_DEFAULT); - - /* It would be nice to allocate buffers separately for each - * channel, but we can't because the channels share the upper - * 13 bits of address lines. Each channels buffer must also - * be 4k aligned, so we allocate 4k for each channel. This is - * inefficient FIXME: do better, if possible */ - mal->tx_virt_addr = dma_alloc_coherent(&ocpdev->dev, - MAL_DT_ALIGN * - maldata->num_tx_chans, - &mal->tx_phys_addr, GFP_KERNEL); - if (mal->tx_virt_addr == NULL) { + set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB | + MAL_CFG_OPBBL | MAL_CFG_LEA); + + mal_enable_eob_irq(mal); + + /* Allocate space for BD rings */ + BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32); + BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32); + bd_size = sizeof(struct mal_descriptor) * + (NUM_TX_BUFF * maldata->num_tx_chans + + NUM_RX_BUFF * maldata->num_rx_chans); + mal->bd_virt = + dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL); + + if (!mal->bd_virt) { printk(KERN_ERR - "mal%d: Out of memory allocating MAL descriptors !\n", - ocpdev->def->index); + "mal%d: out of memory allocating RX/TX descriptors!\n", + mal->def->index); err = -ENOMEM; goto fail; } + memset(mal->bd_virt, 0, bd_size); - /* God, oh, god, I hate DCRs */ - set_mal_dcrn(mal, DCRN_MALTXCTP0R, mal->tx_phys_addr); -#ifdef DCRN_MALTXCTP1R - if (maldata->num_tx_chans > 1) - set_mal_dcrn(mal, DCRN_MALTXCTP1R, - mal->tx_phys_addr + MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP1R */ -#ifdef DCRN_MALTXCTP2R - if (maldata->num_tx_chans > 2) - set_mal_dcrn(mal, DCRN_MALTXCTP2R, - mal->tx_phys_addr + 2 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP2R */ -#ifdef DCRN_MALTXCTP3R - if (maldata->num_tx_chans > 3) - set_mal_dcrn(mal, DCRN_MALTXCTP3R, - mal->tx_phys_addr + 3 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP3R */ -#ifdef DCRN_MALTXCTP4R - if (maldata->num_tx_chans > 4) - set_mal_dcrn(mal, DCRN_MALTXCTP4R, - mal->tx_phys_addr + 4 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP4R */ -#ifdef DCRN_MALTXCTP5R - if (maldata->num_tx_chans > 5) - set_mal_dcrn(mal, DCRN_MALTXCTP5R, - mal->tx_phys_addr + 5 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP5R */ -#ifdef DCRN_MALTXCTP6R - if (maldata->num_tx_chans > 6) - set_mal_dcrn(mal, DCRN_MALTXCTP6R, - mal->tx_phys_addr + 6 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP6R */ -#ifdef DCRN_MALTXCTP7R - if (maldata->num_tx_chans > 7) - set_mal_dcrn(mal, DCRN_MALTXCTP7R, - mal->tx_phys_addr + 7 * MAL_DT_ALIGN); -#endif /* DCRN_MALTXCTP7R */ - - mal->rx_virt_addr = dma_alloc_coherent(&ocpdev->dev, - MAL_DT_ALIGN * - maldata->num_rx_chans, - &mal->rx_phys_addr, GFP_KERNEL); - - set_mal_dcrn(mal, DCRN_MALRXCTP0R, mal->rx_phys_addr); -#ifdef DCRN_MALRXCTP1R - if (maldata->num_rx_chans > 1) - set_mal_dcrn(mal, DCRN_MALRXCTP1R, - mal->rx_phys_addr + MAL_DT_ALIGN); -#endif /* DCRN_MALRXCTP1R */ -#ifdef DCRN_MALRXCTP2R - if (maldata->num_rx_chans > 2) - set_mal_dcrn(mal, DCRN_MALRXCTP2R, - mal->rx_phys_addr + 2 * MAL_DT_ALIGN); -#endif /* DCRN_MALRXCTP2R */ -#ifdef DCRN_MALRXCTP3R - if (maldata->num_rx_chans > 3) - set_mal_dcrn(mal, DCRN_MALRXCTP3R, - mal->rx_phys_addr + 3 * MAL_DT_ALIGN); -#endif /* DCRN_MALRXCTP3R */ + for (i = 0; i < maldata->num_tx_chans; ++i) + set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma + + sizeof(struct mal_descriptor) * + mal_tx_bd_offset(mal, i)); + + for (i = 0; i < maldata->num_rx_chans; ++i) + set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma + + sizeof(struct mal_descriptor) * + mal_rx_bd_offset(mal, i)); err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal); if (err) - goto fail; - err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE ", mal); + goto fail2; + err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal); if (err) - goto fail; + goto fail3; err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal); if (err) - goto fail; + goto fail4; err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal); if (err) - goto fail; + goto fail5; err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal); if (err) - goto fail; + goto fail6; - set_mal_dcrn(mal, DCRN_MALIER, - MALIER_DE | MALIER_NE | MALIER_TE | - MALIER_OPBE | MALIER_PLBE); + /* Enable all MAL SERR interrupt sources */ + set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS); - /* Advertise me to the rest of the world */ + /* Advertise this instance to the rest of the world */ ocp_set_drvdata(ocpdev, mal); - printk(KERN_INFO "mal%d: Initialized, %d tx channels, %d rx channels\n", - ocpdev->def->index, maldata->num_tx_chans, - maldata->num_rx_chans); + mal_dbg_register(mal->def->index, mal); + printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n", + mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans); return 0; + fail6: + free_irq(maldata->rxde_irq, mal); + fail5: + free_irq(maldata->txeob_irq, mal); + fail4: + free_irq(maldata->txde_irq, mal); + fail3: + free_irq(maldata->serr_irq, mal); + fail2: + dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma); fail: - /* FIXME: dispose requested IRQs ! */ - if (err && mal) - kfree(mal); + kfree(mal); return err; } static void __exit mal_remove(struct ocp_device *ocpdev) { struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev); - struct ocp_func_mal_data *maldata = ocpdev->def->additions; + struct ocp_func_mal_data *maldata = mal->def->additions; + + MAL_DBG("%d: remove" NL, mal->def->index); - BUG_ON(!maldata); + /* Syncronize with scheduled polling, + stolen from net/core/dev.c:dev_close() + */ + clear_bit(__LINK_STATE_START, &mal->poll_dev.state); + netif_poll_disable(&mal->poll_dev); + + if (!list_empty(&mal->list)) { + /* This is *very* bad */ + printk(KERN_EMERG + "mal%d: commac list is not empty on remove!\n", + mal->def->index); + } ocp_set_drvdata(ocpdev, NULL); - /* FIXME: shut down the MAL, deal with dependency with emac */ free_irq(maldata->serr_irq, mal); free_irq(maldata->txde_irq, mal); free_irq(maldata->txeob_irq, mal); free_irq(maldata->rxde_irq, mal); free_irq(maldata->rxeob_irq, mal); - if (mal->tx_virt_addr) - dma_free_coherent(&ocpdev->dev, - MAL_DT_ALIGN * maldata->num_tx_chans, - mal->tx_virt_addr, mal->tx_phys_addr); + mal_reset(mal); - if (mal->rx_virt_addr) - dma_free_coherent(&ocpdev->dev, - MAL_DT_ALIGN * maldata->num_rx_chans, - mal->rx_virt_addr, mal->rx_phys_addr); + mal_dbg_register(mal->def->index, NULL); + + dma_free_coherent(&ocpdev->dev, + sizeof(struct mal_descriptor) * + (NUM_TX_BUFF * maldata->num_tx_chans + + NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt, + mal->bd_dma); kfree(mal); } /* Structure for a device driver */ static struct ocp_device_id mal_ids[] = { - {.vendor = OCP_ANY_ID,.function = OCP_FUNC_MAL}, - {.vendor = OCP_VENDOR_INVALID} + { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL }, + { .vendor = OCP_VENDOR_INVALID} }; static struct ocp_driver mal_driver = { @@ -441,23 +570,14 @@ static struct ocp_driver mal_driver = { .remove = mal_remove, }; -static int __init init_mals(void) +int __init mal_init(void) { - int rc; - - rc = ocp_register_driver(&mal_driver); - if (rc < 0) { - ocp_unregister_driver(&mal_driver); - return -ENODEV; - } - - return 0; + MAL_DBG(": init" NL); + return ocp_register_driver(&mal_driver); } -static void __exit exit_mals(void) +void __exit mal_exit(void) { + MAL_DBG(": exit" NL); ocp_unregister_driver(&mal_driver); } - -module_init(init_mals); -module_exit(exit_mals); diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h index dd9f0dabc6e0..15b0bdae26ac 100644 --- a/drivers/net/ibm_emac/ibm_emac_mal.h +++ b/drivers/net/ibm_emac/ibm_emac_mal.h @@ -1,131 +1,267 @@ -#ifndef _IBM_EMAC_MAL_H -#define _IBM_EMAC_MAL_H +/* + * drivers/net/ibm_emac/ibm_emac_mal.h + * + * Memory Access Layer (MAL) support + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * + * Based on original work by + * Armin Kuster + * Copyright 2002 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_EMAC_MAL_H_ +#define __IBM_EMAC_MAL_H_ +#include +#include #include +#include -#define MAL_DT_ALIGN (4096) /* Alignment for each channel's descriptor table */ +#include -#define MAL_CHAN_MASK(chan) (0x80000000 >> (chan)) +/* + * These MAL "versions" probably aren't the real versions IBM uses for these + * MAL cores, I assigned them just to make #ifdefs in this file nicer and + * reflect the fact that 40x and 44x have slightly different MALs. --ebs + */ +#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \ + defined(CONFIG_440EP) || defined(CONFIG_NP405H) +#define MAL_VERSION 1 +#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) +#define MAL_VERSION 2 +#else +#error "Unknown SoC, please check chip manual and choose MAL 'version'" +#endif + +/* MALx DCR registers */ +#define MAL_CFG 0x00 +#define MAL_CFG_SR 0x80000000 +#define MAL_CFG_PLBB 0x00004000 +#define MAL_CFG_OPBBL 0x00000080 +#define MAL_CFG_EOPIE 0x00000004 +#define MAL_CFG_LEA 0x00000002 +#define MAL_CFG_SD 0x00000001 +#if MAL_VERSION == 1 +#define MAL_CFG_PLBP_MASK 0x00c00000 +#define MAL_CFG_PLBP_10 0x00800000 +#define MAL_CFG_GA 0x00200000 +#define MAL_CFG_OA 0x00100000 +#define MAL_CFG_PLBLE 0x00080000 +#define MAL_CFG_PLBT_MASK 0x00078000 +#define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK) +#elif MAL_VERSION == 2 +#define MAL_CFG_RPP_MASK 0x00c00000 +#define MAL_CFG_RPP_10 0x00800000 +#define MAL_CFG_RMBS_MASK 0x00300000 +#define MAL_CFG_WPP_MASK 0x000c0000 +#define MAL_CFG_WPP_10 0x00080000 +#define MAL_CFG_WMBS_MASK 0x00030000 +#define MAL_CFG_PLBLE 0x00008000 +#define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \ + MAL_CFG_RPP_10 | MAL_CFG_WPP_10) +#else +#error "Unknown MAL version" +#endif + +#define MAL_ESR 0x01 +#define MAL_ESR_EVB 0x80000000 +#define MAL_ESR_CIDT 0x40000000 +#define MAL_ESR_CID_MASK 0x3e000000 +#define MAL_ESR_CID_SHIFT 25 +#define MAL_ESR_DE 0x00100000 +#define MAL_ESR_OTE 0x00040000 +#define MAL_ESR_OSE 0x00020000 +#define MAL_ESR_PEIN 0x00010000 +#define MAL_ESR_DEI 0x00000010 +#define MAL_ESR_OTEI 0x00000004 +#define MAL_ESR_OSEI 0x00000002 +#define MAL_ESR_PBEI 0x00000001 +#if MAL_VERSION == 1 +#define MAL_ESR_ONE 0x00080000 +#define MAL_ESR_ONEI 0x00000008 +#elif MAL_VERSION == 2 +#define MAL_ESR_PTE 0x00800000 +#define MAL_ESR_PRE 0x00400000 +#define MAL_ESR_PWE 0x00200000 +#define MAL_ESR_PTEI 0x00000080 +#define MAL_ESR_PREI 0x00000040 +#define MAL_ESR_PWEI 0x00000020 +#else +#error "Unknown MAL version" +#endif + +#define MAL_IER 0x02 +#define MAL_IER_DE 0x00000010 +#define MAL_IER_OTE 0x00000004 +#define MAL_IER_OE 0x00000002 +#define MAL_IER_PE 0x00000001 +#if MAL_VERSION == 1 +#define MAL_IER_NWE 0x00000008 +#define MAL_IER_SOC_EVENTS MAL_IER_NWE +#elif MAL_VERSION == 2 +#define MAL_IER_PT 0x00000080 +#define MAL_IER_PRE 0x00000040 +#define MAL_IER_PWE 0x00000020 +#define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE) +#else +#error "Unknown MAL version" +#endif +#define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \ + MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE) + +#define MAL_TXCASR 0x04 +#define MAL_TXCARR 0x05 +#define MAL_TXEOBISR 0x06 +#define MAL_TXDEIR 0x07 +#define MAL_RXCASR 0x10 +#define MAL_RXCARR 0x11 +#define MAL_RXEOBISR 0x12 +#define MAL_RXDEIR 0x13 +#define MAL_TXCTPR(n) ((n) + 0x20) +#define MAL_RXCTPR(n) ((n) + 0x40) +#define MAL_RCBS(n) ((n) + 0x60) + +/* In reality MAL can handle TX buffers up to 4095 bytes long, + * but this isn't a good round number :) --ebs + */ +#define MAL_MAX_TX_SIZE 4080 +#define MAL_MAX_RX_SIZE 4080 + +static inline int mal_rx_size(int len) +{ + len = (len + 0xf) & ~0xf; + return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len; +} + +static inline int mal_tx_chunks(int len) +{ + return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE; +} + +#define MAL_CHAN_MASK(n) (0x80000000 >> (n)) /* MAL Buffer Descriptor structure */ struct mal_descriptor { - unsigned short ctrl; /* MAL / Commac status control bits */ - short data_len; /* Max length is 4K-1 (12 bits) */ - unsigned char *data_ptr; /* pointer to actual data buffer */ -} __attribute__ ((packed)); + u16 ctrl; /* MAL / Commac status control bits */ + u16 data_len; /* Max length is 4K-1 (12 bits) */ + u32 data_ptr; /* pointer to actual data buffer */ +}; /* the following defines are for the MadMAL status and control registers. */ /* MADMAL transmit and receive status/control bits */ -#define MAL_RX_CTRL_EMPTY 0x8000 -#define MAL_RX_CTRL_WRAP 0x4000 -#define MAL_RX_CTRL_CM 0x2000 -#define MAL_RX_CTRL_LAST 0x1000 -#define MAL_RX_CTRL_FIRST 0x0800 -#define MAL_RX_CTRL_INTR 0x0400 - -#define MAL_TX_CTRL_READY 0x8000 -#define MAL_TX_CTRL_WRAP 0x4000 -#define MAL_TX_CTRL_CM 0x2000 -#define MAL_TX_CTRL_LAST 0x1000 -#define MAL_TX_CTRL_INTR 0x0400 +#define MAL_RX_CTRL_EMPTY 0x8000 +#define MAL_RX_CTRL_WRAP 0x4000 +#define MAL_RX_CTRL_CM 0x2000 +#define MAL_RX_CTRL_LAST 0x1000 +#define MAL_RX_CTRL_FIRST 0x0800 +#define MAL_RX_CTRL_INTR 0x0400 +#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST) +#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE) + +#define MAL_TX_CTRL_READY 0x8000 +#define MAL_TX_CTRL_WRAP 0x4000 +#define MAL_TX_CTRL_CM 0x2000 +#define MAL_TX_CTRL_LAST 0x1000 +#define MAL_TX_CTRL_INTR 0x0400 struct mal_commac_ops { - void (*txeob) (void *dev, u32 chanmask); - void (*txde) (void *dev, u32 chanmask); - void (*rxeob) (void *dev, u32 chanmask); - void (*rxde) (void *dev, u32 chanmask); + void (*poll_tx) (void *dev); + int (*poll_rx) (void *dev, int budget); + int (*peek_rx) (void *dev); + void (*rxde) (void *dev); }; struct mal_commac { - struct mal_commac_ops *ops; - void *dev; - u32 tx_chan_mask, rx_chan_mask; - struct list_head list; + struct mal_commac_ops *ops; + void *dev; + struct list_head poll_list; + int rx_stopped; + + u32 tx_chan_mask; + u32 rx_chan_mask; + struct list_head list; }; struct ibm_ocp_mal { - int dcrbase; + int dcrbase; - struct list_head commac; - u32 tx_chan_mask, rx_chan_mask; + struct list_head poll_list; + struct net_device poll_dev; - dma_addr_t tx_phys_addr; - struct mal_descriptor *tx_virt_addr; + struct list_head list; + u32 tx_chan_mask; + u32 rx_chan_mask; - dma_addr_t rx_phys_addr; - struct mal_descriptor *rx_virt_addr; -}; + dma_addr_t bd_dma; + struct mal_descriptor *bd_virt; -#define GET_MAL_STANZA(base,dcrn) \ - case base: \ - x = mfdcr(dcrn(base)); \ - break; - -#define SET_MAL_STANZA(base,dcrn, val) \ - case base: \ - mtdcr(dcrn(base), (val)); \ - break; - -#define GET_MAL0_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL_BASE,dcrn) -#define SET_MAL0_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL_BASE,dcrn,val) - -#ifdef DCRN_MAL1_BASE -#define GET_MAL1_STANZA(dcrn) GET_MAL_STANZA(DCRN_MAL1_BASE,dcrn) -#define SET_MAL1_STANZA(dcrn,val) SET_MAL_STANZA(DCRN_MAL1_BASE,dcrn,val) -#else /* ! DCRN_MAL1_BASE */ -#define GET_MAL1_STANZA(dcrn) -#define SET_MAL1_STANZA(dcrn,val) -#endif + struct ocp_def *def; +}; -#define get_mal_dcrn(mal, dcrn) ({ \ - u32 x; \ - switch ((mal)->dcrbase) { \ - GET_MAL0_STANZA(dcrn) \ - GET_MAL1_STANZA(dcrn) \ - default: \ - x = 0; \ - BUG(); \ - } \ -x; }) - -#define set_mal_dcrn(mal, dcrn, val) do { \ - switch ((mal)->dcrbase) { \ - SET_MAL0_STANZA(dcrn,val) \ - SET_MAL1_STANZA(dcrn,val) \ - default: \ - BUG(); \ - } } while (0) - -static inline void mal_enable_tx_channels(struct ibm_ocp_mal *mal, u32 chanmask) +static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg) { - set_mal_dcrn(mal, DCRN_MALTXCASR, - get_mal_dcrn(mal, DCRN_MALTXCASR) | chanmask); + return mfdcr(mal->dcrbase + reg); } -static inline void mal_disable_tx_channels(struct ibm_ocp_mal *mal, - u32 chanmask) +static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val) { - set_mal_dcrn(mal, DCRN_MALTXCARR, chanmask); + mtdcr(mal->dcrbase + reg, val); } -static inline void mal_enable_rx_channels(struct ibm_ocp_mal *mal, u32 chanmask) -{ - set_mal_dcrn(mal, DCRN_MALRXCASR, - get_mal_dcrn(mal, DCRN_MALRXCASR) | chanmask); -} +/* Register MAL devices */ +int mal_init(void) __init; +void mal_exit(void) __exit; -static inline void mal_disable_rx_channels(struct ibm_ocp_mal *mal, - u32 chanmask) -{ - set_mal_dcrn(mal, DCRN_MALRXCARR, chanmask); -} +int mal_register_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac) __init; +void mal_unregister_commac(struct ibm_ocp_mal *mal, + struct mal_commac *commac) __exit; +int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size); + +/* Returns BD ring offset for a particular channel + (in 'struct mal_descriptor' elements) +*/ +int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel); +int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel); + +void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel); +void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel); +void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel); +void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel); -extern int mal_register_commac(struct ibm_ocp_mal *mal, - struct mal_commac *commac); -extern int mal_unregister_commac(struct ibm_ocp_mal *mal, - struct mal_commac *commac); +/* Add/remove EMAC to/from MAL polling list */ +void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac); +void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac); + +/* Ethtool MAL registers */ +struct ibm_mal_regs { + u32 tx_count; + u32 rx_count; + + u32 cfg; + u32 esr; + u32 ier; + u32 tx_casr; + u32 tx_carr; + u32 tx_eobisr; + u32 tx_deir; + u32 rx_casr; + u32 rx_carr; + u32 rx_eobisr; + u32 rx_deir; + u32 tx_ctpr[32]; + u32 rx_ctpr[32]; + u32 rcbs[32]; +}; -extern int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, - unsigned long size); +int mal_get_regs_len(struct ibm_ocp_mal *mal); +void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf); -#endif /* _IBM_EMAC_MAL_H */ +#endif /* __IBM_EMAC_MAL_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c index 14213f090e91..a27e49cfe43b 100644 --- a/drivers/net/ibm_emac/ibm_emac_phy.c +++ b/drivers/net/ibm_emac/ibm_emac_phy.c @@ -1,96 +1,80 @@ /* - * ibm_ocp_phy.c + * drivers/net/ibm_emac/ibm_emac_phy.c * - * PHY drivers for the ibm ocp ethernet driver. Borrowed - * from sungem_phy.c, though I only kept the generic MII + * Driver for PowerPC 4xx on-chip ethernet controller, PHY support. + * Borrowed from sungem_phy.c, though I only kept the generic MII * driver for now. * * This file should be shared with other drivers or eventually * merged as the "low level" part of miilib * * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org) + * (c) 2004-2005, Eugene Surovegin * */ - #include - #include - #include -#include #include #include -#include #include #include #include +#include + #include "ibm_emac_phy.h" -static int reset_one_mii_phy(struct mii_phy *phy, int phy_id) +static inline int phy_read(struct mii_phy *phy, int reg) +{ + return phy->mdio_read(phy->dev, phy->address, reg); +} + +static inline void phy_write(struct mii_phy *phy, int reg, int val) { - u16 val; + phy->mdio_write(phy->dev, phy->address, reg, val); +} + +int mii_reset_phy(struct mii_phy *phy) +{ + int val; int limit = 10000; - val = __phy_read(phy, phy_id, MII_BMCR); + val = phy_read(phy, MII_BMCR); val &= ~BMCR_ISOLATE; val |= BMCR_RESET; - __phy_write(phy, phy_id, MII_BMCR, val); + phy_write(phy, MII_BMCR, val); - udelay(100); + udelay(300); while (limit--) { - val = __phy_read(phy, phy_id, MII_BMCR); - if ((val & BMCR_RESET) == 0) + val = phy_read(phy, MII_BMCR); + if (val >= 0 && (val & BMCR_RESET) == 0) break; udelay(10); } if ((val & BMCR_ISOLATE) && limit > 0) - __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE); - - return (limit <= 0); -} - -static int cis8201_init(struct mii_phy *phy) -{ - u16 epcr; - - epcr = phy_read(phy, MII_CIS8201_EPCR); - epcr &= ~EPCR_MODE_MASK; - - switch (phy->mode) { - case PHY_MODE_TBI: - epcr |= EPCR_TBI_MODE; - break; - case PHY_MODE_RTBI: - epcr |= EPCR_RTBI_MODE; - break; - case PHY_MODE_GMII: - epcr |= EPCR_GMII_MODE; - break; - case PHY_MODE_RGMII: - default: - epcr |= EPCR_RGMII_MODE; - } + phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); - phy_write(phy, MII_CIS8201_EPCR, epcr); - - return 0; + return limit <= 0; } static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) { - u16 ctl, adv; + int ctl, adv; - phy->autoneg = 1; + phy->autoneg = AUTONEG_ENABLE; phy->speed = SPEED_10; phy->duplex = DUPLEX_HALF; - phy->pause = 0; + phy->pause = phy->asym_pause = 0; phy->advertising = advertise; /* Setup standard advertise */ adv = phy_read(phy, MII_ADVERTISE); - adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); + if (adv < 0) + return adv; + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); if (advertise & ADVERTISED_10baseT_Half) adv |= ADVERTISE_10HALF; if (advertise & ADVERTISED_10baseT_Full) @@ -99,8 +83,25 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) adv |= ADVERTISE_100HALF; if (advertise & ADVERTISED_100baseT_Full) adv |= ADVERTISE_100FULL; + if (advertise & ADVERTISED_Pause) + adv |= ADVERTISE_PAUSE_CAP; + if (advertise & ADVERTISED_Asym_Pause) + adv |= ADVERTISE_PAUSE_ASYM; phy_write(phy, MII_ADVERTISE, adv); + if (phy->features & + (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { + adv = phy_read(phy, MII_CTRL1000); + if (adv < 0) + return adv; + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if (advertise & ADVERTISED_1000baseT_Full) + adv |= ADVERTISE_1000FULL; + if (advertise & ADVERTISED_1000baseT_Half) + adv |= ADVERTISE_1000HALF; + phy_write(phy, MII_CTRL1000, adv); + } + /* Start/Restart aneg */ ctl = phy_read(phy, MII_BMCR); ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); @@ -111,14 +112,16 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) { - u16 ctl; + int ctl; - phy->autoneg = 0; + phy->autoneg = AUTONEG_DISABLE; phy->speed = speed; phy->duplex = fd; - phy->pause = 0; + phy->pause = phy->asym_pause = 0; ctl = phy_read(phy, MII_BMCR); + if (ctl < 0) + return ctl; ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE); /* First reset the PHY */ @@ -132,6 +135,8 @@ static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) ctl |= BMCR_SPEED100; break; case SPEED_1000: + ctl |= BMCR_SPEED1000; + break; default: return -EINVAL; } @@ -144,112 +149,143 @@ static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) static int genmii_poll_link(struct mii_phy *phy) { - u16 status; + int status; - (void)phy_read(phy, MII_BMSR); + /* Clear latched value with dummy read */ + phy_read(phy, MII_BMSR); status = phy_read(phy, MII_BMSR); - if ((status & BMSR_LSTATUS) == 0) + if (status < 0 || (status & BMSR_LSTATUS) == 0) return 0; - if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE)) + if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE)) return 0; return 1; } -#define MII_CIS8201_ACSR 0x1c -#define ACSR_DUPLEX_STATUS 0x0020 -#define ACSR_SPEED_1000BASET 0x0010 -#define ACSR_SPEED_100BASET 0x0008 - -static int cis8201_read_link(struct mii_phy *phy) +static int genmii_read_link(struct mii_phy *phy) { - u16 acsr; + if (phy->autoneg == AUTONEG_ENABLE) { + int glpa = 0; + int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); + if (lpa < 0) + return lpa; + + if (phy->features & + (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) { + int adv = phy_read(phy, MII_CTRL1000); + glpa = phy_read(phy, MII_STAT1000); + + if (glpa < 0 || adv < 0) + return adv; + + glpa &= adv << 2; + } + + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = phy->asym_pause = 0; + + if (glpa & (LPA_1000FULL | LPA_1000HALF)) { + phy->speed = SPEED_1000; + if (glpa & LPA_1000FULL) + phy->duplex = DUPLEX_FULL; + } else if (lpa & (LPA_100FULL | LPA_100HALF)) { + phy->speed = SPEED_100; + if (lpa & LPA_100FULL) + phy->duplex = DUPLEX_FULL; + } else if (lpa & LPA_10FULL) + phy->duplex = DUPLEX_FULL; - if (phy->autoneg) { - acsr = phy_read(phy, MII_CIS8201_ACSR); + if (phy->duplex == DUPLEX_FULL) { + phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; + phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; + } + } else { + int bmcr = phy_read(phy, MII_BMCR); + if (bmcr < 0) + return bmcr; - if (acsr & ACSR_DUPLEX_STATUS) + if (bmcr & BMCR_FULLDPLX) phy->duplex = DUPLEX_FULL; else phy->duplex = DUPLEX_HALF; - if (acsr & ACSR_SPEED_1000BASET) { + if (bmcr & BMCR_SPEED1000) phy->speed = SPEED_1000; - } else if (acsr & ACSR_SPEED_100BASET) + else if (bmcr & BMCR_SPEED100) phy->speed = SPEED_100; else phy->speed = SPEED_10; - phy->pause = 0; - } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ + phy->pause = phy->asym_pause = 0; + } return 0; } -static int genmii_read_link(struct mii_phy *phy) +/* Generic implementation for most 10/100/1000 PHYs */ +static struct mii_phy_ops generic_phy_ops = { + .setup_aneg = genmii_setup_aneg, + .setup_forced = genmii_setup_forced, + .poll_link = genmii_poll_link, + .read_link = genmii_read_link +}; + +static struct mii_phy_def genmii_phy_def = { + .phy_id = 0x00000000, + .phy_id_mask = 0x00000000, + .name = "Generic MII", + .ops = &generic_phy_ops +}; + +/* CIS8201 */ +#define MII_CIS8201_EPCR 0x17 +#define EPCR_MODE_MASK 0x3000 +#define EPCR_GMII_MODE 0x0000 +#define EPCR_RGMII_MODE 0x1000 +#define EPCR_TBI_MODE 0x2000 +#define EPCR_RTBI_MODE 0x3000 + +static int cis8201_init(struct mii_phy *phy) { - u16 lpa; + int epcr; - if (phy->autoneg) { - lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE); + epcr = phy_read(phy, MII_CIS8201_EPCR); + if (epcr < 0) + return epcr; - phy->speed = SPEED_10; - phy->duplex = DUPLEX_HALF; - phy->pause = 0; + epcr &= ~EPCR_MODE_MASK; - if (lpa & (LPA_100FULL | LPA_100HALF)) { - phy->speed = SPEED_100; - if (lpa & LPA_100FULL) - phy->duplex = DUPLEX_FULL; - } else if (lpa & LPA_10FULL) - phy->duplex = DUPLEX_FULL; + switch (phy->mode) { + case PHY_MODE_TBI: + epcr |= EPCR_TBI_MODE; + break; + case PHY_MODE_RTBI: + epcr |= EPCR_RTBI_MODE; + break; + case PHY_MODE_GMII: + epcr |= EPCR_GMII_MODE; + break; + case PHY_MODE_RGMII: + default: + epcr |= EPCR_RGMII_MODE; } - /* On non-aneg, we assume what we put in BMCR is the speed, - * though magic-aneg shouldn't prevent this case from occurring - */ + + phy_write(phy, MII_CIS8201_EPCR, epcr); return 0; } -#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \ - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ - SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII) -#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ - SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full) - -/* CIS8201 phy ops */ static struct mii_phy_ops cis8201_phy_ops = { - init:cis8201_init, - setup_aneg:genmii_setup_aneg, - setup_forced:genmii_setup_forced, - poll_link:genmii_poll_link, - read_link:cis8201_read_link -}; - -/* Generic implementation for most 10/100 PHYs */ -static struct mii_phy_ops generic_phy_ops = { - setup_aneg:genmii_setup_aneg, - setup_forced:genmii_setup_forced, - poll_link:genmii_poll_link, - read_link:genmii_read_link + .init = cis8201_init, + .setup_aneg = genmii_setup_aneg, + .setup_forced = genmii_setup_forced, + .poll_link = genmii_poll_link, + .read_link = genmii_read_link }; static struct mii_phy_def cis8201_phy_def = { - phy_id:0x000fc410, - phy_id_mask:0x000ffff0, - name:"CIS8201 Gigabit Ethernet", - features:MII_GBIT_FEATURES, - magic_aneg:0, - ops:&cis8201_phy_ops -}; - -static struct mii_phy_def genmii_phy_def = { - phy_id:0x00000000, - phy_id_mask:0x00000000, - name:"Generic MII", - features:MII_BASIC_FEATURES, - magic_aneg:0, - ops:&generic_phy_ops + .phy_id = 0x000fc410, + .phy_id_mask = 0x000ffff0, + .name = "CIS8201 Gigabit Ethernet", + .ops = &cis8201_phy_ops }; static struct mii_phy_def *mii_phy_table[] = { @@ -258,39 +294,60 @@ static struct mii_phy_def *mii_phy_table[] = { NULL }; -int mii_phy_probe(struct mii_phy *phy, int mii_id) +int mii_phy_probe(struct mii_phy *phy, int address) { - int rc; - u32 id; struct mii_phy_def *def; int i; + u32 id; - phy->autoneg = 0; + phy->autoneg = AUTONEG_DISABLE; phy->advertising = 0; - phy->mii_id = mii_id; - phy->speed = 0; - phy->duplex = 0; - phy->pause = 0; - - /* Take PHY out of isloate mode and reset it. */ - rc = reset_one_mii_phy(phy, mii_id); - if (rc) + phy->address = address; + phy->speed = SPEED_10; + phy->duplex = DUPLEX_HALF; + phy->pause = phy->asym_pause = 0; + + /* Take PHY out of isolate mode and reset it. */ + if (mii_reset_phy(phy)) return -ENODEV; /* Read ID and find matching entry */ - id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2)) - & 0xfffffff0; + id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2); for (i = 0; (def = mii_phy_table[i]) != NULL; i++) if ((id & def->phy_id_mask) == def->phy_id) break; /* Should never be NULL (we have a generic entry), but... */ - if (def == NULL) + if (!def) return -ENODEV; phy->def = def; + /* Determine PHY features if needed */ + phy->features = def->features; + if (!phy->features) { + u16 bmsr = phy_read(phy, MII_BMSR); + if (bmsr & BMSR_ANEGCAPABLE) + phy->features |= SUPPORTED_Autoneg; + if (bmsr & BMSR_10HALF) + phy->features |= SUPPORTED_10baseT_Half; + if (bmsr & BMSR_10FULL) + phy->features |= SUPPORTED_10baseT_Full; + if (bmsr & BMSR_100HALF) + phy->features |= SUPPORTED_100baseT_Half; + if (bmsr & BMSR_100FULL) + phy->features |= SUPPORTED_100baseT_Full; + if (bmsr & BMSR_ESTATEN) { + u16 esr = phy_read(phy, MII_ESTATUS); + if (esr & ESTATUS_1000_TFULL) + phy->features |= SUPPORTED_1000baseT_Full; + if (esr & ESTATUS_1000_THALF) + phy->features |= SUPPORTED_1000baseT_Half; + } + phy->features |= SUPPORTED_MII; + } + /* Setup default advertising */ - phy->advertising = def->features; + phy->advertising = phy->features; return 0; } diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h index 61afbea96563..a70e0fea54c4 100644 --- a/drivers/net/ibm_emac/ibm_emac_phy.h +++ b/drivers/net/ibm_emac/ibm_emac_phy.h @@ -1,65 +1,25 @@ - /* - * ibm_emac_phy.h - * + * drivers/net/ibm_emac/ibm_emac_phy.h * - * Benjamin Herrenschmidt - * February 2003 + * Driver for PowerPC 4xx on-chip ethernet controller, PHY support * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Benjamin Herrenschmidt + * February 2003 * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * Minor additions by Eugene Surovegin , 2004 * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * * This file basically duplicates sungem_phy.{c,h} with different PHYs * supported. I'm looking into merging that in a single mii layer more * flexible than mii.c */ -#ifndef _IBM_EMAC_PHY_H_ -#define _IBM_EMAC_PHY_H_ - -/* - * PHY mode settings - * Used for multi-mode capable PHYs - */ -#define PHY_MODE_NA 0 -#define PHY_MODE_MII 1 -#define PHY_MODE_RMII 2 -#define PHY_MODE_SMII 3 -#define PHY_MODE_RGMII 4 -#define PHY_MODE_TBI 5 -#define PHY_MODE_GMII 6 -#define PHY_MODE_RTBI 7 -#define PHY_MODE_SGMII 8 - -/* - * PHY specific registers/values - */ - -/* CIS8201 */ -#define MII_CIS8201_EPCR 0x17 -#define EPCR_MODE_MASK 0x3000 -#define EPCR_GMII_MODE 0x0000 -#define EPCR_RGMII_MODE 0x1000 -#define EPCR_TBI_MODE 0x2000 -#define EPCR_RTBI_MODE 0x3000 +#ifndef _IBM_OCP_PHY_H_ +#define _IBM_OCP_PHY_H_ struct mii_phy; @@ -77,7 +37,8 @@ struct mii_phy_ops { struct mii_phy_def { u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ u32 phy_id_mask; /* Significant bits */ - u32 features; /* Ethtool SUPPORTED_* defines */ + u32 features; /* Ethtool SUPPORTED_* defines or + 0 for autodetect */ int magic_aneg; /* Autoneg does all speed test for us */ const char *name; const struct mii_phy_ops *ops; @@ -86,8 +47,11 @@ struct mii_phy_def { /* An instance of a PHY, partially borrowed from mii_if_info */ struct mii_phy { struct mii_phy_def *def; - int advertising; - int mii_id; + u32 advertising; /* Ethtool ADVERTISED_* defines */ + u32 features; /* Copied from mii_phy_def.features + or determined automaticaly */ + int address; /* PHY address */ + int mode; /* PHY mode */ /* 1: autoneg enabled, 0: disabled */ int autoneg; @@ -98,40 +62,19 @@ struct mii_phy { int speed; int duplex; int pause; - - /* PHY mode - if needed */ - int mode; + int asym_pause; /* Provided by host chip */ struct net_device *dev; - int (*mdio_read) (struct net_device * dev, int mii_id, int reg); - void (*mdio_write) (struct net_device * dev, int mii_id, int reg, + int (*mdio_read) (struct net_device * dev, int addr, int reg); + void (*mdio_write) (struct net_device * dev, int addr, int reg, int val); }; /* Pass in a struct mii_phy with dev, mdio_read and mdio_write * filled, the remaining fields will be filled on return */ -extern int mii_phy_probe(struct mii_phy *phy, int mii_id); - -static inline int __phy_read(struct mii_phy *phy, int id, int reg) -{ - return phy->mdio_read(phy->dev, id, reg); -} - -static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val) -{ - phy->mdio_write(phy->dev, id, reg, val); -} - -static inline int phy_read(struct mii_phy *phy, int reg) -{ - return phy->mdio_read(phy->dev, phy->mii_id, reg); -} - -static inline void phy_write(struct mii_phy *phy, int reg, int val) -{ - phy->mdio_write(phy->dev, phy->mii_id, reg, val); -} +int mii_phy_probe(struct mii_phy *phy, int address); +int mii_reset_phy(struct mii_phy *phy); -#endif /* _IBM_EMAC_PHY_H_ */ +#endif /* _IBM_OCP_PHY_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c new file mode 100644 index 000000000000..f0b1ffb2dbbf --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_rgmii.c @@ -0,0 +1,201 @@ +/* + * drivers/net/ibm_emac/ibm_emac_rgmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * + * Based on original work by + * Matt Porter + * Copyright 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include + +#include "ibm_emac_core.h" +#include "ibm_emac_debug.h" + +/* RGMIIx_FER */ +#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4)) +#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4)) +#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4)) +#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4)) +#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4)) + +/* RGMIIx_SSR */ +#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8)) +#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8)) +#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8)) + +/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */ +static inline int rgmii_valid_mode(int phy_mode) +{ + return phy_mode == PHY_MODE_GMII || + phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_TBI || + phy_mode == PHY_MODE_RTBI; +} + +static inline const char *rgmii_mode_name(int mode) +{ + switch (mode) { + case PHY_MODE_RGMII: + return "RGMII"; + case PHY_MODE_TBI: + return "TBI"; + case PHY_MODE_GMII: + return "GMII"; + case PHY_MODE_RTBI: + return "RTBI"; + default: + BUG(); + } +} + +static inline u32 rgmii_mode_mask(int mode, int input) +{ + switch (mode) { + case PHY_MODE_RGMII: + return RGMII_FER_RGMII(input); + case PHY_MODE_TBI: + return RGMII_FER_TBI(input); + case PHY_MODE_GMII: + return RGMII_FER_GMII(input); + case PHY_MODE_RTBI: + return RGMII_FER_RTBI(input); + default: + BUG(); + } +} + +static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode) +{ + struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); + struct rgmii_regs *p; + + RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode); + + if (!dev) { + dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL); + if (!dev) { + printk(KERN_ERR + "rgmii%d: couldn't allocate device structure!\n", + ocpdev->def->index); + return -ENOMEM; + } + + p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr, + sizeof(struct rgmii_regs)); + if (!p) { + printk(KERN_ERR + "rgmii%d: could not ioremap device registers!\n", + ocpdev->def->index); + kfree(dev); + return -ENOMEM; + } + + dev->base = p; + ocp_set_drvdata(ocpdev, dev); + + /* Disable all inputs by default */ + out_be32(&p->fer, 0); + } else + p = dev->base; + + /* Enable this input */ + out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input)); + + printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n", + ocpdev->def->index, input, rgmii_mode_name(mode)); + + ++dev->users; + return 0; +} + +int __init rgmii_attach(void *emac) +{ + struct ocp_enet_private *dev = emac; + struct ocp_func_emac_data *emacdata = dev->def->additions; + + /* Check if we need to attach to a RGMII */ + if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) { + dev->rgmii_input = emacdata->rgmii_mux; + dev->rgmii_dev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII, + emacdata->rgmii_idx); + if (!dev->rgmii_dev) { + printk(KERN_ERR "emac%d: unknown rgmii%d!\n", + dev->def->index, emacdata->rgmii_idx); + return -ENODEV; + } + if (rgmii_init + (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) { + printk(KERN_ERR + "emac%d: rgmii%d initialization failed!\n", + dev->def->index, emacdata->rgmii_idx); + return -ENODEV; + } + } + return 0; +} + +void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed) +{ + struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); + u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input); + + RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); + + if (speed == SPEED_1000) + ssr |= RGMII_SSR_1000(input); + else if (speed == SPEED_100) + ssr |= RGMII_SSR_100(input); + + out_be32(&dev->base->ssr, ssr); +} + +void __exit __rgmii_fini(struct ocp_device *ocpdev, int input) +{ + struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); + BUG_ON(!dev || dev->users == 0); + + RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); + + /* Disable this input */ + out_be32(&dev->base->fer, + in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input)); + + if (!--dev->users) { + /* Free everything if this is the last user */ + ocp_set_drvdata(ocpdev, NULL); + iounmap((void *)dev->base); + kfree(dev); + } +} + +int __rgmii_get_regs_len(struct ocp_device *ocpdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct rgmii_regs); +} + +void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf) +{ + struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = ocpdev->def->index; + memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs)); + return regs + 1; +} diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h index 49f188f4ea6e..a1ffb8a44fff 100644 --- a/drivers/net/ibm_emac/ibm_emac_rgmii.h +++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h @@ -1,5 +1,7 @@ /* - * Defines for the IBM RGMII bridge + * drivers/net/ibm_emac/ibm_emac_rgmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support. * * Based on ocp_zmii.h/ibm_emac_zmii.h * Armin Kuster akuster@mvista.com @@ -7,6 +9,9 @@ * Copyright 2004 MontaVista Software, Inc. * Matt Porter * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -19,47 +24,42 @@ #include /* RGMII bridge */ -typedef struct rgmii_regs { +struct rgmii_regs { u32 fer; /* Function enable register */ u32 ssr; /* Speed select register */ -} rgmii_t; - -#define RGMII_INPUTS 4 +}; /* RGMII device */ struct ibm_ocp_rgmii { struct rgmii_regs *base; - int mode[RGMII_INPUTS]; int users; /* number of EMACs using this RGMII bridge */ }; -/* Fuctional Enable Reg */ -#define RGMII_FER_MASK(x) (0x00000007 << (4*x)) -#define RGMII_RTBI 0x00000004 -#define RGMII_RGMII 0x00000005 -#define RGMII_TBI 0x00000006 -#define RGMII_GMII 0x00000007 - -/* Speed Selection reg */ +#ifdef CONFIG_IBM_EMAC_RGMII +int rgmii_attach(void *emac) __init; -#define RGMII_SP2_100 0x00000002 -#define RGMII_SP2_1000 0x00000004 -#define RGMII_SP3_100 0x00000200 -#define RGMII_SP3_1000 0x00000400 +void __rgmii_fini(struct ocp_device *ocpdev, int input) __exit; +static inline void rgmii_fini(struct ocp_device *ocpdev, int input) +{ + if (ocpdev) + __rgmii_fini(ocpdev, input); +} -#define RGMII_MII2_SPDMASK 0x00000007 -#define RGMII_MII3_SPDMASK 0x00000700 +void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed); -#define RGMII_MII2_100MB RGMII_SP2_100 & ~RGMII_SP2_1000 -#define RGMII_MII2_1000MB RGMII_SP2_1000 & ~RGMII_SP2_100 -#define RGMII_MII2_10MB ~(RGMII_SP2_100 | RGMII_SP2_1000) -#define RGMII_MII3_100MB RGMII_SP3_100 & ~RGMII_SP3_1000 -#define RGMII_MII3_1000MB RGMII_SP3_1000 & ~RGMII_SP3_100 -#define RGMII_MII3_10MB ~(RGMII_SP3_100 | RGMII_SP3_1000) +int __rgmii_get_regs_len(struct ocp_device *ocpdev); +static inline int rgmii_get_regs_len(struct ocp_device *ocpdev) +{ + return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0; +} -#define RTBI 0 -#define RGMII 1 -#define TBI 2 -#define GMII 3 +void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf); +#else +# define rgmii_attach(x) 0 +# define rgmii_fini(x,y) ((void)0) +# define rgmii_set_speed(x,y,z) ((void)0) +# define rgmii_get_regs_len(x) 0 +# define rgmii_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_EMAC_RGMII */ #endif /* _IBM_EMAC_RGMII_H_ */ diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c new file mode 100644 index 000000000000..af08afc22f9f --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_tah.c @@ -0,0 +1,111 @@ +/* + * drivers/net/ibm_emac/ibm_emac_tah.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. + * + * Copyright 2004 MontaVista Software, Inc. + * Matt Porter + * + * Copyright (c) 2005 Eugene Surovegin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include + +#include "ibm_emac_core.h" + +static int __init tah_init(struct ocp_device *ocpdev) +{ + struct tah_regs *p; + + if (ocp_get_drvdata(ocpdev)) { + printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index); + return -EBUSY; + } + + /* Initialize TAH and enable IPv4 checksum verification, no TSO yet */ + p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p)); + if (!p) { + printk(KERN_ERR "tah%d: could not ioremap device registers!\n", + ocpdev->def->index); + return -ENOMEM; + } + ocp_set_drvdata(ocpdev, p); + __tah_reset(ocpdev); + + return 0; +} + +int __init tah_attach(void *emac) +{ + struct ocp_enet_private *dev = emac; + struct ocp_func_emac_data *emacdata = dev->def->additions; + + /* Check if we need to attach to a TAH */ + if (emacdata->tah_idx >= 0) { + dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH, + emacdata->tah_idx); + if (!dev->tah_dev) { + printk(KERN_ERR "emac%d: unknown tah%d!\n", + dev->def->index, emacdata->tah_idx); + return -ENODEV; + } + if (tah_init(dev->tah_dev)) { + printk(KERN_ERR + "emac%d: tah%d initialization failed!\n", + dev->def->index, emacdata->tah_idx); + return -ENODEV; + } + } + return 0; +} + +void __exit __tah_fini(struct ocp_device *ocpdev) +{ + struct tah_regs *p = ocp_get_drvdata(ocpdev); + BUG_ON(!p); + ocp_set_drvdata(ocpdev, NULL); + iounmap((void *)p); +} + +void __tah_reset(struct ocp_device *ocpdev) +{ + struct tah_regs *p = ocp_get_drvdata(ocpdev); + int n; + + /* Reset TAH */ + out_be32(&p->mr, TAH_MR_SR); + n = 100; + while ((in_be32(&p->mr) & TAH_MR_SR) && n) + --n; + + if (unlikely(!n)) + printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index); + + /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */ + out_be32(&p->mr, + TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP | + TAH_MR_DIG); +} + +int __tah_get_regs_len(struct ocp_device *ocpdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct tah_regs); +} + +void *tah_dump_regs(struct ocp_device *ocpdev, void *buf) +{ + struct tah_regs *dev = ocp_get_drvdata(ocpdev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct tah_regs *regs = (struct tah_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = ocpdev->def->index; + memcpy_fromio(regs, dev, sizeof(struct tah_regs)); + return regs + 1; +} diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h index ecfc69805521..9299b5dd7eb1 100644 --- a/drivers/net/ibm_emac/ibm_emac_tah.h +++ b/drivers/net/ibm_emac/ibm_emac_tah.h @@ -1,9 +1,13 @@ /* - * Defines for the IBM TAH + * drivers/net/ibm_emac/ibm_emac_tah.h + * + * Driver for PowerPC 4xx on-chip ethernet controller, TAH support. * * Copyright 2004 MontaVista Software, Inc. * Matt Porter * + * Copyright (c) 2005 Eugene Surovegin + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -13,36 +17,72 @@ #ifndef _IBM_EMAC_TAH_H #define _IBM_EMAC_TAH_H +#include +#include +#include + /* TAH */ -typedef struct tah_regs { - u32 tah_revid; +struct tah_regs { + u32 revid; u32 pad[3]; - u32 tah_mr; - u32 tah_ssr0; - u32 tah_ssr1; - u32 tah_ssr2; - u32 tah_ssr3; - u32 tah_ssr4; - u32 tah_ssr5; - u32 tah_tsr; -} tah_t; + u32 mr; + u32 ssr0; + u32 ssr1; + u32 ssr2; + u32 ssr3; + u32 ssr4; + u32 ssr5; + u32 tsr; +}; /* TAH engine */ -#define TAH_MR_CVR 0x80000000 -#define TAH_MR_SR 0x40000000 -#define TAH_MR_ST_256 0x01000000 -#define TAH_MR_ST_512 0x02000000 -#define TAH_MR_ST_768 0x03000000 -#define TAH_MR_ST_1024 0x04000000 -#define TAH_MR_ST_1280 0x05000000 -#define TAH_MR_ST_1536 0x06000000 -#define TAH_MR_TFS_16KB 0x00000000 -#define TAH_MR_TFS_2KB 0x00200000 -#define TAH_MR_TFS_4KB 0x00400000 -#define TAH_MR_TFS_6KB 0x00600000 -#define TAH_MR_TFS_8KB 0x00800000 -#define TAH_MR_TFS_10KB 0x00a00000 -#define TAH_MR_DTFP 0x00100000 -#define TAH_MR_DIG 0x00080000 +#define TAH_MR_CVR 0x80000000 +#define TAH_MR_SR 0x40000000 +#define TAH_MR_ST_256 0x01000000 +#define TAH_MR_ST_512 0x02000000 +#define TAH_MR_ST_768 0x03000000 +#define TAH_MR_ST_1024 0x04000000 +#define TAH_MR_ST_1280 0x05000000 +#define TAH_MR_ST_1536 0x06000000 +#define TAH_MR_TFS_16KB 0x00000000 +#define TAH_MR_TFS_2KB 0x00200000 +#define TAH_MR_TFS_4KB 0x00400000 +#define TAH_MR_TFS_6KB 0x00600000 +#define TAH_MR_TFS_8KB 0x00800000 +#define TAH_MR_TFS_10KB 0x00a00000 +#define TAH_MR_DTFP 0x00100000 +#define TAH_MR_DIG 0x00080000 + +#ifdef CONFIG_IBM_EMAC_TAH +int tah_attach(void *emac) __init; + +void __tah_fini(struct ocp_device *ocpdev) __exit; +static inline void tah_fini(struct ocp_device *ocpdev) +{ + if (ocpdev) + __tah_fini(ocpdev); +} + +void __tah_reset(struct ocp_device *ocpdev); +static inline void tah_reset(struct ocp_device *ocpdev) +{ + if (ocpdev) + __tah_reset(ocpdev); +} + +int __tah_get_regs_len(struct ocp_device *ocpdev); +static inline int tah_get_regs_len(struct ocp_device *ocpdev) +{ + return ocpdev ? __tah_get_regs_len(ocpdev) : 0; +} + +void *tah_dump_regs(struct ocp_device *ocpdev, void *buf); +#else +# define tah_attach(x) 0 +# define tah_fini(x) ((void)0) +# define tah_reset(x) ((void)0) +# define tah_get_regs_len(x) 0 +# define tah_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_EMAC_TAH */ #endif /* _IBM_EMAC_TAH_H */ diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c new file mode 100644 index 000000000000..35c1185079ed --- /dev/null +++ b/drivers/net/ibm_emac/ibm_emac_zmii.c @@ -0,0 +1,255 @@ +/* + * drivers/net/ibm_emac/ibm_emac_zmii.c + * + * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or + * + * Based on original work by + * Armin Kuster + * Copyright 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include + +#include "ibm_emac_core.h" +#include "ibm_emac_debug.h" + +/* ZMIIx_FER */ +#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4)) +#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \ + ZMII_FER_MDI(2) | ZMII_FER_MDI(3)) + +#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4)) +#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4)) +#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4)) + +/* ZMIIx_SSR */ +#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4)) +#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4)) +#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4)) + +/* ZMII only supports MII, RMII and SMII + * we also support autodetection for backward compatibility + */ +static inline int zmii_valid_mode(int mode) +{ + return mode == PHY_MODE_MII || + mode == PHY_MODE_RMII || + mode == PHY_MODE_SMII || + mode == PHY_MODE_NA; +} + +static inline const char *zmii_mode_name(int mode) +{ + switch (mode) { + case PHY_MODE_MII: + return "MII"; + case PHY_MODE_RMII: + return "RMII"; + case PHY_MODE_SMII: + return "SMII"; + default: + BUG(); + } +} + +static inline u32 zmii_mode_mask(int mode, int input) +{ + switch (mode) { + case PHY_MODE_MII: + return ZMII_FER_MII(input); + case PHY_MODE_RMII: + return ZMII_FER_RMII(input); + case PHY_MODE_SMII: + return ZMII_FER_SMII(input); + default: + return 0; + } +} + +static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + struct zmii_regs *p; + + ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode); + + if (!dev) { + dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL); + if (!dev) { + printk(KERN_ERR + "zmii%d: couldn't allocate device structure!\n", + ocpdev->def->index); + return -ENOMEM; + } + dev->mode = PHY_MODE_NA; + + p = (struct zmii_regs *)ioremap(ocpdev->def->paddr, + sizeof(struct zmii_regs)); + if (!p) { + printk(KERN_ERR + "zmii%d: could not ioremap device registers!\n", + ocpdev->def->index); + kfree(dev); + return -ENOMEM; + } + dev->base = p; + ocp_set_drvdata(ocpdev, dev); + + /* We may need FER value for autodetection later */ + dev->fer_save = in_be32(&p->fer); + + /* Disable all inputs by default */ + out_be32(&p->fer, 0); + } else + p = dev->base; + + if (!zmii_valid_mode(*mode)) { + /* Probably an EMAC connected to RGMII, + * but it still may need ZMII for MDIO + */ + goto out; + } + + /* Autodetect ZMII mode if not specified. + * This is only for backward compatibility with the old driver. + * Please, always specify PHY mode in your board port to avoid + * any surprises. + */ + if (dev->mode == PHY_MODE_NA) { + if (*mode == PHY_MODE_NA) { + u32 r = dev->fer_save; + + ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL, + ocpdev->def->index, r); + + if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1))) + dev->mode = PHY_MODE_MII; + else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1))) + dev->mode = PHY_MODE_RMII; + else + dev->mode = PHY_MODE_SMII; + } else + dev->mode = *mode; + + printk(KERN_NOTICE "zmii%d: bridge in %s mode\n", + ocpdev->def->index, zmii_mode_name(dev->mode)); + } else { + /* All inputs must use the same mode */ + if (*mode != PHY_MODE_NA && *mode != dev->mode) { + printk(KERN_ERR + "zmii%d: invalid mode %d specified for input %d\n", + ocpdev->def->index, *mode, input); + return -EINVAL; + } + } + + /* Report back correct PHY mode, + * it may be used during PHY initialization. + */ + *mode = dev->mode; + + /* Enable this input */ + out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input)); + out: + ++dev->users; + return 0; +} + +int __init zmii_attach(void *emac) +{ + struct ocp_enet_private *dev = emac; + struct ocp_func_emac_data *emacdata = dev->def->additions; + + if (emacdata->zmii_idx >= 0) { + dev->zmii_input = emacdata->zmii_mux; + dev->zmii_dev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII, + emacdata->zmii_idx); + if (!dev->zmii_dev) { + printk(KERN_ERR "emac%d: unknown zmii%d!\n", + dev->def->index, emacdata->zmii_idx); + return -ENODEV; + } + if (zmii_init + (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) { + printk(KERN_ERR + "emac%d: zmii%d initialization failed!\n", + dev->def->index, emacdata->zmii_idx); + return -ENODEV; + } + } + return 0; +} + +void __zmii_enable_mdio(struct ocp_device *ocpdev, int input) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL; + + ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input); + + out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input)); +} + +void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + u32 ssr = in_be32(&dev->base->ssr); + + ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed); + + if (speed == SPEED_100) + ssr |= ZMII_SSR_SP(input); + else + ssr &= ~ZMII_SSR_SP(input); + + out_be32(&dev->base->ssr, ssr); +} + +void __exit __zmii_fini(struct ocp_device *ocpdev, int input) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + BUG_ON(!dev || dev->users == 0); + + ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input); + + /* Disable this input */ + out_be32(&dev->base->fer, + in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input)); + + if (!--dev->users) { + /* Free everything if this is the last user */ + ocp_set_drvdata(ocpdev, NULL); + iounmap((void *)dev->base); + kfree(dev); + } +} + +int __zmii_get_regs_len(struct ocp_device *ocpdev) +{ + return sizeof(struct emac_ethtool_regs_subhdr) + + sizeof(struct zmii_regs); +} + +void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf) +{ + struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); + struct emac_ethtool_regs_subhdr *hdr = buf; + struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1); + + hdr->version = 0; + hdr->index = ocpdev->def->index; + memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs)); + return regs + 1; +} diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h index 6f6cd2a39e38..0bb26062c0ad 100644 --- a/drivers/net/ibm_emac/ibm_emac_zmii.h +++ b/drivers/net/ibm_emac/ibm_emac_zmii.h @@ -1,23 +1,27 @@ /* - * ocp_zmii.h + * drivers/net/ibm_emac/ibm_emac_zmii.h * - * Defines for the IBM ZMII bridge + * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support. * - * Armin Kuster akuster@mvista.com - * Dec, 2001 + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin or * - * Copyright 2001 MontaVista Softare Inc. + * Based on original work by + * Armin Kuster + * Copyright 2001 MontaVista Softare Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * */ - #ifndef _IBM_EMAC_ZMII_H_ #define _IBM_EMAC_ZMII_H_ #include +#include +#include /* ZMII bridge registers */ struct zmii_regs { @@ -26,68 +30,54 @@ struct zmii_regs { u32 smiirs; /* SMII status reg */ }; -#define ZMII_INPUTS 4 - /* ZMII device */ struct ibm_ocp_zmii { struct zmii_regs *base; - int mode[ZMII_INPUTS]; + int mode; /* subset of PHY_MODE_XXXX */ int users; /* number of EMACs using this ZMII bridge */ + u32 fer_save; /* FER value left by firmware */ }; -/* Fuctional Enable Reg */ - -#define ZMII_FER_MASK(x) (0xf0000000 >> (4*x)) - -#define ZMII_MDI0 0x80000000 -#define ZMII_SMII0 0x40000000 -#define ZMII_RMII0 0x20000000 -#define ZMII_MII0 0x10000000 -#define ZMII_MDI1 0x08000000 -#define ZMII_SMII1 0x04000000 -#define ZMII_RMII1 0x02000000 -#define ZMII_MII1 0x01000000 -#define ZMII_MDI2 0x00800000 -#define ZMII_SMII2 0x00400000 -#define ZMII_RMII2 0x00200000 -#define ZMII_MII2 0x00100000 -#define ZMII_MDI3 0x00080000 -#define ZMII_SMII3 0x00040000 -#define ZMII_RMII3 0x00020000 -#define ZMII_MII3 0x00010000 +#ifdef CONFIG_IBM_EMAC_ZMII +int zmii_attach(void *emac) __init; -/* Speed Selection reg */ +void __zmii_fini(struct ocp_device *ocpdev, int input) __exit; +static inline void zmii_fini(struct ocp_device *ocpdev, int input) +{ + if (ocpdev) + __zmii_fini(ocpdev, input); +} -#define ZMII_SCI0 0x40000000 -#define ZMII_FSS0 0x20000000 -#define ZMII_SP0 0x10000000 -#define ZMII_SCI1 0x04000000 -#define ZMII_FSS1 0x02000000 -#define ZMII_SP1 0x01000000 -#define ZMII_SCI2 0x00400000 -#define ZMII_FSS2 0x00200000 -#define ZMII_SP2 0x00100000 -#define ZMII_SCI3 0x00040000 -#define ZMII_FSS3 0x00020000 -#define ZMII_SP3 0x00010000 +void __zmii_enable_mdio(struct ocp_device *ocpdev, int input); +static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input) +{ + if (ocpdev) + __zmii_enable_mdio(ocpdev, input); +} -#define ZMII_MII0_100MB ZMII_SP0 -#define ZMII_MII0_10MB ~ZMII_SP0 -#define ZMII_MII1_100MB ZMII_SP1 -#define ZMII_MII1_10MB ~ZMII_SP1 -#define ZMII_MII2_100MB ZMII_SP2 -#define ZMII_MII2_10MB ~ZMII_SP2 -#define ZMII_MII3_100MB ZMII_SP3 -#define ZMII_MII3_10MB ~ZMII_SP3 +void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed); +static inline void zmii_set_speed(struct ocp_device *ocpdev, int input, + int speed) +{ + if (ocpdev) + __zmii_set_speed(ocpdev, input, speed); +} -/* SMII Status reg */ +int __zmii_get_regs_len(struct ocp_device *ocpdev); +static inline int zmii_get_regs_len(struct ocp_device *ocpdev) +{ + return ocpdev ? __zmii_get_regs_len(ocpdev) : 0; +} -#define ZMII_STS0 0xFF000000 /* EMAC0 smii status mask */ -#define ZMII_STS1 0x00FF0000 /* EMAC1 smii status mask */ +void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf); -#define SMII 0 -#define RMII 1 -#define MII 2 -#define MDI 3 +#else +# define zmii_attach(x) 0 +# define zmii_fini(x,y) ((void)0) +# define zmii_enable_mdio(x,y) ((void)0) +# define zmii_set_speed(x,y,z) ((void)0) +# define zmii_get_regs_len(x) 0 +# define zmii_dump_regs(x,buf) (buf) +#endif /* !CONFIG_IBM_EMAC_ZMII */ #endif /* _IBM_EMAC_ZMII_H_ */ -- GitLab From 24682978eb5316b9e6041c2773e210180a037d05 Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Fri, 14 Oct 2005 03:00:53 -0700 Subject: [PATCH 0630/1519] [PATCH] Add MAINTAINER entry for the new PowerPC 4xx on-chip ethernet controller driver Add MAINTAINER entry for the new PPC4xx EMAC driver Signed-off-by: Eugene Surovegin Signed-off-by: Jeff Garzik --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 767fb610963e..900bd58f2dbe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1942,6 +1942,14 @@ M: george@mvista.com L: netdev@vger.kernel.org S: Supported +POWERPC 4xx EMAC DRIVER +P: Eugene Surovegin +M: ebs@ebshome.net +W: http://kernel.ebshome.net/emac/ +L: linuxppc-embedded@ozlabs.org +L: netdev@vger.kernel.org +S: Maintained + PNP SUPPORT P: Adam Belay M: ambx1@neo.rr.com -- GitLab From b2795f596932286ef12dc08857960d654f577405 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 28 Oct 2005 16:43:40 -0400 Subject: [PATCH 0631/1519] [git] change permissions on drivers/net/amd8111e.[ch] to 0644, removing executable bits. --- drivers/net/amd8111e.c | 0 drivers/net/amd8111e.h | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 drivers/net/amd8111e.c mode change 100755 => 100644 drivers/net/amd8111e.h diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c old mode 100755 new mode 100644 diff --git a/drivers/net/amd8111e.h b/drivers/net/amd8111e.h old mode 100755 new mode 100644 -- GitLab From 7380a78a973a8109c13cb0e47617c456b6f6e1f5 Mon Sep 17 00:00:00 2001 From: Vasily Averin Date: Fri, 28 Oct 2005 16:46:35 -0400 Subject: [PATCH 0632/1519] sis900: come alive after temporary memory shortage 1) Forgotten counter incrementation in sis900_rx() in case it doesn't get memory for skb, that leads to whole interface failure. Problem is accompanied with messages: eth0: Memory squeeze,deferring packet. eth0: NULL pointer encountered in Rx ring, skipping 2) If counter cur_rx overflows and there'll be temporary memory problems buffer can't be recreated later, when memory IS available. 3) Limit the work in handler to prevent the endless packets processing if new packets are generated faster then handled. Signed-off-by: Konstantin Khorenko Signed-off-by: Vasily Averin Signed-off-by: Jeff Garzik --- drivers/net/sis900.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 23b713c700b3..1d4d88680db1 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1696,15 +1696,20 @@ static int sis900_rx(struct net_device *net_dev) long ioaddr = net_dev->base_addr; unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC; u32 rx_status = sis_priv->rx_ring[entry].cmdsts; + int rx_work_limit; if (netif_msg_rx_status(sis_priv)) printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d " "status:0x%8.8x\n", sis_priv->cur_rx, sis_priv->dirty_rx, rx_status); + rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx; while (rx_status & OWN) { unsigned int rx_size; + if (--rx_work_limit < 0) + break; + rx_size = (rx_status & DSIZE) - CRC_SIZE; if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) { @@ -1732,9 +1737,11 @@ static int sis900_rx(struct net_device *net_dev) we are working on NULL sk_buff :-( */ if (sis_priv->rx_skbuff[entry] == NULL) { if (netif_msg_rx_err(sis_priv)) - printk(KERN_INFO "%s: NULL pointer " - "encountered in Rx ring, skipping\n", - net_dev->name); + printk(KERN_WARNING "%s: NULL pointer " + "encountered in Rx ring\n" + "cur_rx:%4.4d, dirty_rx:%4.4d\n", + net_dev->name, sis_priv->cur_rx, + sis_priv->dirty_rx); break; } @@ -1770,6 +1777,7 @@ static int sis900_rx(struct net_device *net_dev) sis_priv->rx_ring[entry].cmdsts = 0; sis_priv->rx_ring[entry].bufptr = 0; sis_priv->stats.rx_dropped++; + sis_priv->cur_rx++; break; } skb->dev = net_dev; @@ -1787,7 +1795,7 @@ static int sis900_rx(struct net_device *net_dev) /* refill the Rx buffer, what if the rate of refilling is slower * than consuming ?? */ - for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) { + for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) { struct sk_buff *skb; entry = sis_priv->dirty_rx % NUM_RX_DESC; -- GitLab From b4558ea93d66a43f7990d26f145fd4c54a01c9bf Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 28 Oct 2005 16:53:13 -0400 Subject: [PATCH 0633/1519] drivers/net: Remove pointless checks for NULL prior to calling kfree() --- drivers/net/acenic.c | 6 +-- drivers/net/au1000_eth.c | 6 +-- drivers/net/b44.c | 12 ++---- drivers/net/bmac.c | 6 +-- drivers/net/bnx2.c | 12 ++---- drivers/net/e1000/e1000_ethtool.c | 7 +--- drivers/net/hamradio/mkiss.c | 6 +-- drivers/net/ibmveth.c | 6 +-- drivers/net/irda/donauboe.c | 6 +-- drivers/net/irda/irda-usb.c | 6 +-- drivers/net/irda/irport.c | 3 +- drivers/net/irda/sir_dev.c | 3 +- drivers/net/irda/vlsi_ir.c | 3 +- drivers/net/mace.c | 6 +-- drivers/net/ni65.c | 9 ++-- drivers/net/rrunner.c | 6 +-- drivers/net/s2io.c | 3 +- drivers/net/saa9730.c | 8 +--- drivers/net/tg3.c | 6 +-- drivers/net/tulip/de2104x.c | 6 +-- drivers/net/tulip/tulip_core.c | 6 +-- drivers/net/via-velocity.c | 6 +-- drivers/net/wireless/airo.c | 48 +++++++++------------- drivers/net/wireless/airo_cs.c | 4 +- drivers/net/wireless/atmel.c | 6 +-- drivers/net/wireless/atmel_cs.c | 3 +- drivers/net/wireless/hostap/hostap_ioctl.c | 9 +--- drivers/net/wireless/prism54/islpci_dev.c | 3 +- drivers/net/wireless/prism54/oid_mgt.c | 9 ++-- drivers/net/wireless/strip.c | 38 ++++++----------- include/net/ax25.h | 3 +- include/net/netrom.h | 3 +- 32 files changed, 90 insertions(+), 174 deletions(-) diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index dbecc6bf7851..b8953de5664a 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -871,10 +871,8 @@ static void ace_init_cleanup(struct net_device *dev) if (ap->info) pci_free_consistent(ap->pdev, sizeof(struct ace_info), ap->info, ap->info_dma); - if (ap->skb) - kfree(ap->skb); - if (ap->trace_buf) - kfree(ap->trace_buf); + kfree(ap->skb); + kfree(ap->trace_buf); if (dev->irq) free_irq(dev->irq, dev); diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 78506911d656..332e9953c55c 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1606,8 +1606,7 @@ au1000_probe(u32 ioaddr, int irq, int port_num) /* here we should have a valid dev plus aup-> register addresses * so we can reset the mac properly.*/ reset_mac(dev); - if (aup->mii) - kfree(aup->mii); + kfree(aup->mii); for (i = 0; i < NUM_RX_DMA; i++) { if (aup->rx_db_inuse[i]) ReleaseDB(aup, aup->rx_db_inuse[i]); @@ -1806,8 +1805,7 @@ static void __exit au1000_cleanup_module(void) if (dev) { aup = (struct au1000_private *) dev->priv; unregister_netdev(dev); - if (aup->mii) - kfree(aup->mii); + kfree(aup->mii); for (j = 0; j < NUM_RX_DMA; j++) { if (aup->rx_db_inuse[j]) ReleaseDB(aup, aup->rx_db_inuse[j]); diff --git a/drivers/net/b44.c b/drivers/net/b44.c index ab845076ff9f..5485e3b1cd35 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1131,14 +1131,10 @@ static void b44_init_rings(struct b44 *bp) */ static void b44_free_consistent(struct b44 *bp) { - if (bp->rx_buffers) { - kfree(bp->rx_buffers); - bp->rx_buffers = NULL; - } - if (bp->tx_buffers) { - kfree(bp->tx_buffers); - bp->tx_buffers = NULL; - } + kfree(bp->rx_buffers); + bp->rx_buffers = NULL; + kfree(bp->tx_buffers); + bp->tx_buffers = NULL; if (bp->rx_ring) { if (bp->flags & B44_FLAG_RX_RING_HACK) { dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma, diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 60dba4a1ca5c..73f2fcfc557f 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -1689,10 +1689,8 @@ static void __exit bmac_exit(void) { macio_unregister_driver(&bmac_driver); - if (bmac_emergency_rxbuf != NULL) { - kfree(bmac_emergency_rxbuf); - bmac_emergency_rxbuf = NULL; - } + kfree(bmac_emergency_rxbuf); + bmac_emergency_rxbuf = NULL; } MODULE_AUTHOR("Randy Gobbel/Paul Mackerras"); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 3a2ace01e444..11d252318221 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -314,20 +314,16 @@ bnx2_free_mem(struct bnx2 *bp) bp->tx_desc_ring, bp->tx_desc_mapping); bp->tx_desc_ring = NULL; } - if (bp->tx_buf_ring) { - kfree(bp->tx_buf_ring); - bp->tx_buf_ring = NULL; - } + kfree(bp->tx_buf_ring); + bp->tx_buf_ring = NULL; if (bp->rx_desc_ring) { pci_free_consistent(bp->pdev, sizeof(struct rx_bd) * RX_DESC_CNT, bp->rx_desc_ring, bp->rx_desc_mapping); bp->rx_desc_ring = NULL; } - if (bp->rx_buf_ring) { - kfree(bp->rx_buf_ring); - bp->rx_buf_ring = NULL; - } + kfree(bp->rx_buf_ring); + bp->rx_buf_ring = NULL; } static int diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6b9acc7f94a3..9c7feaeaa6a4 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -965,11 +965,8 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) if(rxdr->desc) pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma); - if(txdr->buffer_info) - kfree(txdr->buffer_info); - if(rxdr->buffer_info) - kfree(rxdr->buffer_info); - + kfree(txdr->buffer_info); + kfree(rxdr->buffer_info); return; } diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 85d6dc005be0..3e9accf137e7 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -390,10 +390,8 @@ static void ax_changedmtu(struct mkiss *ax) "MTU change cancelled.\n", ax->dev->name); dev->mtu = ax->mtu; - if (xbuff != NULL) - kfree(xbuff); - if (rbuff != NULL) - kfree(rbuff); + kfree(xbuff); + kfree(rbuff); return; } diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index f5819527ec9d..36da54ad2b7b 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -276,10 +276,8 @@ static void ibmveth_free_buffer_pool(struct ibmveth_adapter *adapter, struct ibm { int i; - if(pool->free_map) { - kfree(pool->free_map); - pool->free_map = NULL; - } + kfree(pool->free_map); + pool->free_map = NULL; if(pool->skbuff && pool->dma_addr) { for(i = 0; i < pool->size; ++i) { diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index 0a08c539c051..0282771b1cbb 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -1695,11 +1695,9 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid) freebufs: for (i = 0; i < TX_SLOTS; ++i) - if (self->tx_bufs[i]) - kfree (self->tx_bufs[i]); + kfree (self->tx_bufs[i]); for (i = 0; i < RX_SLOTS; ++i) - if (self->rx_bufs[i]) - kfree (self->rx_bufs[i]); + kfree (self->rx_bufs[i]); kfree(self->ringbuf); freeregion: diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 6c766fdc51a6..c22c0517883c 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1168,10 +1168,8 @@ static inline void irda_usb_close(struct irda_usb_cb *self) unregister_netdev(self->netdev); /* Remove the speed buffer */ - if (self->speed_buff != NULL) { - kfree(self->speed_buff); - self->speed_buff = NULL; - } + kfree(self->speed_buff); + self->speed_buff = NULL; } /********************** USB CONFIG SUBROUTINES **********************/ diff --git a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c index 5971315f3fa0..3d016a498e1d 100644 --- a/drivers/net/irda/irport.c +++ b/drivers/net/irda/irport.c @@ -235,8 +235,7 @@ static int irport_close(struct irport_cb *self) __FUNCTION__, self->io.sir_base); release_region(self->io.sir_base, self->io.sir_ext); - if (self->tx_buff.head) - kfree(self->tx_buff.head); + kfree(self->tx_buff.head); if (self->rx_buff.skb) kfree_skb(self->rx_buff.skb); diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c index efc5a8870565..df22b8b532e7 100644 --- a/drivers/net/irda/sir_dev.c +++ b/drivers/net/irda/sir_dev.c @@ -490,8 +490,7 @@ static void sirdev_free_buffers(struct sir_dev *dev) { if (dev->rx_buff.skb) kfree_skb(dev->rx_buff.skb); - if (dev->tx_buff.head) - kfree(dev->tx_buff.head); + kfree(dev->tx_buff.head); dev->rx_buff.head = dev->tx_buff.head = NULL; dev->rx_buff.skb = NULL; } diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index 651c5a6578fd..a9f49f058cfb 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -473,8 +473,7 @@ static int vlsi_free_ring(struct vlsi_ring *r) rd_set_addr_status(rd, 0, 0); if (busaddr) pci_unmap_single(r->pdev, busaddr, r->len, r->dir); - if (rd->buf) - kfree(rd->buf); + kfree(rd->buf); } kfree(r); return 0; diff --git a/drivers/net/mace.c b/drivers/net/mace.c index 81d0a26e4f41..09b1e7b364e5 100644 --- a/drivers/net/mace.c +++ b/drivers/net/mace.c @@ -1035,10 +1035,8 @@ static void __exit mace_cleanup(void) { macio_unregister_driver(&mace_driver); - if (dummy_buf) { - kfree(dummy_buf); - dummy_buf = NULL; - } + kfree(dummy_buf); + dummy_buf = NULL; } MODULE_AUTHOR("Paul Mackerras"); diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c index 925d1dfcc4dc..bb42ff218484 100644 --- a/drivers/net/ni65.c +++ b/drivers/net/ni65.c @@ -696,8 +696,7 @@ static void ni65_free_buffer(struct priv *p) return; for(i=0;itmdbounce[i]) - kfree(p->tmdbounce[i]); + kfree(p->tmdbounce[i]); #ifdef XMT_VIA_SKB if(p->tmd_skb[i]) dev_kfree_skb(p->tmd_skb[i]); @@ -710,12 +709,10 @@ static void ni65_free_buffer(struct priv *p) if(p->recv_skb[i]) dev_kfree_skb(p->recv_skb[i]); #else - if(p->recvbounce[i]) - kfree(p->recvbounce[i]); + kfree(p->recvbounce[i]); #endif } - if(p->self) - kfree(p->self); + kfree(p->self); } diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c index ec1a18d189a1..19c2df9c86fe 100644 --- a/drivers/net/rrunner.c +++ b/drivers/net/rrunner.c @@ -1710,10 +1710,8 @@ static int rr_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) error = -EFAULT; } wf_out: - if (oldimage) - kfree(oldimage); - if (image) - kfree(image); + kfree(oldimage); + kfree(image); return error; case SIOCRRID: diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index d303d162974f..5ea897714a14 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -705,8 +705,7 @@ static void free_shared_mem(struct s2io_nic *nic) } kfree(mac_control->rings[i].ba[j]); } - if (mac_control->rings[i].ba) - kfree(mac_control->rings[i].ba); + kfree(mac_control->rings[i].ba); } #endif diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c index fd0167077fbe..110e777f206e 100644 --- a/drivers/net/saa9730.c +++ b/drivers/net/saa9730.c @@ -997,10 +997,7 @@ static void __devexit saa9730_remove_one(struct pci_dev *pdev) if (dev) { unregister_netdev(dev); - - if (dev->priv) - kfree(dev->priv); - + kfree(dev->priv); free_netdev(dev); pci_release_regions(pdev); pci_disable_device(pdev); @@ -1096,8 +1093,7 @@ static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq) return 0; out: - if (dev->priv) - kfree(dev->priv); + kfree(dev->priv); return ret; } diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 551c9449322d..b547233ad9f7 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3918,10 +3918,8 @@ static void tg3_init_rings(struct tg3 *tp) */ static void tg3_free_consistent(struct tg3 *tp) { - if (tp->rx_std_buffers) { - kfree(tp->rx_std_buffers); - tp->rx_std_buffers = NULL; - } + kfree(tp->rx_std_buffers); + tp->rx_std_buffers = NULL; if (tp->rx_std) { pci_free_consistent(tp->pdev, TG3_RX_RING_BYTES, tp->rx_std, tp->rx_std_mapping); diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 6b8eee8f7bfd..d7fb3ffe06ac 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -2076,8 +2076,7 @@ static int __init de_init_one (struct pci_dev *pdev, return 0; err_out_iomap: - if (de->ee_data) - kfree(de->ee_data); + kfree(de->ee_data); iounmap(regs); err_out_res: pci_release_regions(pdev); @@ -2096,8 +2095,7 @@ static void __exit de_remove_one (struct pci_dev *pdev) if (!dev) BUG(); unregister_netdev(dev); - if (de->ee_data) - kfree(de->ee_data); + kfree(de->ee_data); iounmap(de->regs); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 6266a9a7e6e3..125ed00e95a5 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1727,8 +1727,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, tp->rx_ring, tp->rx_ring_dma); err_out_mtable: - if (tp->mtable) - kfree (tp->mtable); + kfree (tp->mtable); pci_iounmap(pdev, ioaddr); err_out_free_res: @@ -1806,8 +1805,7 @@ static void __devexit tulip_remove_one (struct pci_dev *pdev) sizeof (struct tulip_rx_desc) * RX_RING_SIZE + sizeof (struct tulip_tx_desc) * TX_RING_SIZE, tp->rx_ring, tp->rx_ring_dma); - if (tp->mtable) - kfree (tp->mtable); + kfree (tp->mtable); pci_iounmap(pdev, tp->base_addr); free_netdev (dev); pci_release_regions (pdev); diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index abc5cee6eedc..a368d08e7d19 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1212,10 +1212,8 @@ static void velocity_free_td_ring(struct velocity_info *vptr) velocity_free_td_ring_entry(vptr, j, i); } - if (vptr->td_infos[j]) { - kfree(vptr->td_infos[j]); - vptr->td_infos[j] = NULL; - } + kfree(vptr->td_infos[j]); + vptr->td_infos[j] = NULL; } } diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index cb429e783749..4c11699bad91 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2381,14 +2381,10 @@ void stop_airo_card( struct net_device *dev, int freeres ) dev_kfree_skb(skb); } - if (ai->flash) - kfree(ai->flash); - if (ai->rssi) - kfree(ai->rssi); - if (ai->APList) - kfree(ai->APList); - if (ai->SSID) - kfree(ai->SSID); + kfree(ai->flash); + kfree(ai->rssi); + kfree(ai->APList); + kfree(ai->SSID); if (freeres) { /* PCMCIA frees this stuff, so only for PCI and ISA */ release_region( dev->base_addr, 64 ); @@ -3626,10 +3622,8 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) int rc; memset( &mySsid, 0, sizeof( mySsid ) ); - if (ai->flash) { - kfree (ai->flash); - ai->flash = NULL; - } + kfree (ai->flash); + ai->flash = NULL; /* The NOP is the first step in getting the card going */ cmd.cmd = NOP; @@ -3666,14 +3660,10 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) tdsRssiRid rssi_rid; CapabilityRid cap_rid; - if (ai->APList) { - kfree(ai->APList); - ai->APList = NULL; - } - if (ai->SSID) { - kfree(ai->SSID); - ai->SSID = NULL; - } + kfree(ai->APList); + ai->APList = NULL; + kfree(ai->SSID); + ai->SSID = NULL; // general configuration (read/modify/write) status = readConfigRid(ai, lock); if ( status != SUCCESS ) return ERROR; @@ -3687,10 +3677,8 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */ } else { - if (ai->rssi) { - kfree(ai->rssi); - ai->rssi = NULL; - } + kfree(ai->rssi); + ai->rssi = NULL; if (cap_rid.softCap & 8) ai->config.rmode |= RXMODE_NORMALIZED_RSSI; else @@ -5369,11 +5357,13 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) { static int proc_close( struct inode *inode, struct file *file ) { - struct proc_data *data = (struct proc_data *)file->private_data; - if ( data->on_close != NULL ) data->on_close( inode, file ); - if ( data->rbuffer ) kfree( data->rbuffer ); - if ( data->wbuffer ) kfree( data->wbuffer ); - kfree( data ); + struct proc_data *data = file->private_data; + + if (data->on_close != NULL) + data->on_close(inode, file); + kfree(data->rbuffer); + kfree(data->wbuffer); + kfree(data); return 0; } diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index bf25584d68d3..784de9109113 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -258,9 +258,7 @@ static void airo_detach(dev_link_t *link) /* Unlink device structure, free pieces */ *linkp = link->next; - if (link->priv) { - kfree(link->priv); - } + kfree(link->priv); kfree(link); } /* airo_detach */ diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index d57011028b72..1fbe027d26b6 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1653,8 +1653,7 @@ void stop_atmel_card(struct net_device *dev, int freeres) unregister_netdev(dev); remove_proc_entry("driver/atmel", NULL); free_irq(dev->irq, dev); - if (priv->firmware) - kfree(priv->firmware); + kfree(priv->firmware); if (freeres) { /* PCMCIA frees this stuff, so only for PCI */ release_region(dev->base_addr, 64); @@ -2450,8 +2449,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) break; } - if (priv->firmware) - kfree(priv->firmware); + kfree(priv->firmware); priv->firmware = new_firmware; priv->firmware_length = com.len; diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index ff031a3985b3..195cb36619e8 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -259,8 +259,7 @@ static void atmel_detach(dev_link_t *link) /* Unlink device structure, free pieces */ *linkp = link->next; - if (link->priv) - kfree(link->priv); + kfree(link->priv); kfree(link); } diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 53f5246c40aa..2617d70bcda9 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -552,7 +552,6 @@ static int prism2_ioctl_giwaplist(struct net_device *dev, kfree(addr); kfree(qual); - return 0; } @@ -3081,9 +3080,7 @@ static int prism2_ioctl_priv_download(local_info_t *local, struct iw_point *p) ret = local->func->download(local, param); out: - if (param != NULL) - kfree(param); - + kfree(param); return ret; } #endif /* PRISM2_DOWNLOAD_SUPPORT */ @@ -3890,9 +3887,7 @@ static int prism2_ioctl_priv_hostapd(local_info_t *local, struct iw_point *p) } out: - if (param != NULL) - kfree(param); - + kfree(param); return ret; } diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index 6c9584a9f284..78bdb359835e 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -754,8 +754,7 @@ islpci_free_memory(islpci_private *priv) pci_unmap_single(priv->pdev, buf->pci_addr, buf->size, PCI_DMA_FROMDEVICE); buf->pci_addr = 0; - if (buf->mem) - kfree(buf->mem); + kfree(buf->mem); buf->size = 0; buf->mem = NULL; } diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c index 12123e24b113..eea2f04c8c6d 100644 --- a/drivers/net/wireless/prism54/oid_mgt.c +++ b/drivers/net/wireless/prism54/oid_mgt.c @@ -268,11 +268,10 @@ mgt_clean(islpci_private *priv) if (!priv->mib) return; - for (i = 0; i < OID_NUM_LAST; i++) - if (priv->mib[i]) { - kfree(priv->mib[i]); - priv->mib[i] = NULL; - } + for (i = 0; i < OID_NUM_LAST; i++) { + kfree(priv->mib[i]); + priv->mib[i] = NULL; + } kfree(priv->mib); priv->mib = NULL; } diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index 7bc7fc823128..d25264ba0c0e 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -860,12 +860,9 @@ static int allocate_buffers(struct strip *strip_info, int mtu) strip_info->mtu = dev->mtu = mtu; return (1); } - if (r) - kfree(r); - if (s) - kfree(s); - if (t) - kfree(t); + kfree(r); + kfree(s); + kfree(t); return (0); } @@ -922,13 +919,9 @@ static int strip_change_mtu(struct net_device *dev, int new_mtu) printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n", strip_info->dev->name, old_mtu, strip_info->mtu); - if (orbuff) - kfree(orbuff); - if (osbuff) - kfree(osbuff); - if (otbuff) - kfree(otbuff); - + kfree(orbuff); + kfree(osbuff); + kfree(otbuff); return 0; } @@ -2498,18 +2491,13 @@ static int strip_close_low(struct net_device *dev) /* * Free all STRIP frame buffers. */ - if (strip_info->rx_buff) { - kfree(strip_info->rx_buff); - strip_info->rx_buff = NULL; - } - if (strip_info->sx_buff) { - kfree(strip_info->sx_buff); - strip_info->sx_buff = NULL; - } - if (strip_info->tx_buff) { - kfree(strip_info->tx_buff); - strip_info->tx_buff = NULL; - } + kfree(strip_info->rx_buff); + strip_info->rx_buff = NULL; + kfree(strip_info->sx_buff); + strip_info->sx_buff = NULL; + kfree(strip_info->tx_buff); + strip_info->tx_buff = NULL; + del_timer(&strip_info->idle_timer); return 0; } diff --git a/include/net/ax25.h b/include/net/ax25.h index 30bb4a893237..2250a18b0cbb 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -237,8 +237,7 @@ typedef struct ax25_cb { static __inline__ void ax25_cb_put(ax25_cb *ax25) { if (atomic_dec_and_test(&ax25->refcount)) { - if (ax25->digipeat) - kfree(ax25->digipeat); + kfree(ax25->digipeat); kfree(ax25); } } diff --git a/include/net/netrom.h b/include/net/netrom.h index a6bf6e0f606a..a5ee53bce62f 100644 --- a/include/net/netrom.h +++ b/include/net/netrom.h @@ -136,8 +136,7 @@ static __inline__ void nr_node_put(struct nr_node *nr_node) static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh) { if (atomic_dec_and_test(&nr_neigh->refcount)) { - if (nr_neigh->digipeat != NULL) - kfree(nr_neigh->digipeat); + kfree(nr_neigh->digipeat); kfree(nr_neigh); } } -- GitLab From 030ee39c0fef49d7dcd32e71b1ca98fcc23e2a72 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 28 Oct 2005 13:55:08 -0700 Subject: [PATCH 0634/1519] pcmcia: add socket register data to sysfs for yenta devices It's simple, and it's a good debugging aid. Signed-off-by: Linus Torvalds --- drivers/pcmcia/yenta_socket.c | 42 ++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index db9f952f9e3c..ec6ab65f0872 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -151,6 +151,40 @@ static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val) readb(socket->base + 0x800 + reg + 1); } +static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf) +{ + struct pci_dev *dev = to_pci_dev(yentadev); + struct yenta_socket *socket = pci_get_drvdata(dev); + int offset = 0, i; + + offset = snprintf(buf, PAGE_SIZE, "CB registers:"); + for (i = 0; i < 0x24; i += 4) { + unsigned val; + if (!(i & 15)) + offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i); + val = cb_readl(socket, i); + offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val); + } + + offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:"); + for (i = 0; i < 0x45; i++) { + unsigned char val; + if (!(i & 7)) { + if (i & 8) { + memcpy(buf + offset, " -", 2); + offset += 2; + } else + offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i); + } + val = exca_readb(socket, i); + offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val); + } + buf[offset++] = '\n'; + return offset; +} + +static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL); + /* * Ugh, mixed-mode cardbus and 16-bit pccard state: things depend * on what kind of card is inserted.. @@ -765,6 +799,9 @@ static void yenta_close(struct pci_dev *dev) { struct yenta_socket *sock = pci_get_drvdata(dev); + /* Remove the register attributes */ + device_remove_file(&dev->dev, &dev_attr_yenta_registers); + /* we don't want a dying socket registered */ pcmcia_unregister_socket(&sock->socket); @@ -1138,8 +1175,11 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i /* Register it with the pcmcia layer.. */ ret = pcmcia_register_socket(&socket->socket); - if (ret == 0) + if (ret == 0) { + /* Add the yenta register attributes */ + device_create_file(&dev->dev, &dev_attr_yenta_registers); goto out; + } unmap: iounmap(socket->base); -- GitLab From 4f075707a9380592586d608a8d04dfbdb3c40339 Mon Sep 17 00:00:00 2001 From: Komuro Date: Fri, 28 Oct 2005 16:55:55 -0400 Subject: [PATCH 0635/1519] [netdrvr] ne2k-pci based card does not support bus-mastering. pci_set_master is unnecessary. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik --- drivers/net/ne2k-pci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index e531a4eedfee..d11821dd86ed 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -675,7 +675,6 @@ static int ne2k_pci_resume (struct pci_dev *pdev) pci_set_power_state(pdev, 0); pci_restore_state(pdev); pci_enable_device(pdev); - pci_set_master(pdev); NS8390_init(dev, 1); netif_device_attach(dev); -- GitLab From ad18b0ea089928367185e13d11424aea91d4b41f Mon Sep 17 00:00:00 2001 From: Panagiotis Issaris Date: Mon, 5 Sep 2005 04:14:10 +0200 Subject: [PATCH 0636/1519] [PATCH] ipw2200: Missing kmalloc check The ipw2200 driver code in current GIT contains a kmalloc() followed by a memset() without handling a possible memory allocation failure. Signed-off-by: Panagiotis Issaris Signed-off-by: Jeff Garzik --- drivers/net/wireless/ipw2200.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index de4e6c23e4b8..3db0c32afe82 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -4030,6 +4030,10 @@ static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *priv) int i; rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL); + if (unlikely(!rxq)) { + IPW_ERROR("memory allocation failed\n"); + return NULL; + } memset(rxq, 0, sizeof(*rxq)); spin_lock_init(&rxq->lock); INIT_LIST_HEAD(&rxq->rx_free); -- GitLab From 6cd37cda7ed117d5a13d9b69aeded57b4fd6de14 Mon Sep 17 00:00:00 2001 From: Peter Osterlund Date: Fri, 28 Oct 2005 20:23:39 +0200 Subject: [PATCH 0637/1519] [PATCH] Fix ext3 warning for unused var Fix compile warning in ext3 quota code. Signed-off-by: Peter Osterlund Signed-off-by: Linus Torvalds --- fs/ext3/super.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 9e24ceb019fe..097383c11154 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -510,19 +510,11 @@ static void ext3_clear_inode(struct inode *inode) kfree(rsv); } -static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs) +static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb) { - struct super_block *sb = vfs->mnt_sb; +#if defined(CONFIG_QUOTA) struct ext3_sb_info *sbi = EXT3_SB(sb); - if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA) - seq_puts(seq, ",data=journal"); - else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA) - seq_puts(seq, ",data=ordered"); - else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) - seq_puts(seq, ",data=writeback"); - -#if defined(CONFIG_QUOTA) if (sbi->s_jquota_fmt) seq_printf(seq, ",jqfmt=%s", (sbi->s_jquota_fmt == QFMT_VFS_OLD) ? "vfsold": "vfsv0"); @@ -539,6 +531,20 @@ static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs) if (sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA) seq_puts(seq, ",grpquota"); #endif +} + +static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs) +{ + struct super_block *sb = vfs->mnt_sb; + + if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA) + seq_puts(seq, ",data=journal"); + else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA) + seq_puts(seq, ",data=ordered"); + else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) + seq_puts(seq, ",data=writeback"); + + ext3_show_quota_options(seq, sb); return 0; } -- GitLab From 406119f49d4a6cf8b6eee639128e0575a95065e3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 27 Oct 2005 14:46:53 -0400 Subject: [PATCH 0638/1519] [PATCH] Ensure that 'make distclean' does not delete files in '.git' Currently, 'make distclean' causes stgit to barf since it may delete files in .git/patches. We really shouldn't allow 'make distclean' anywhere near .git... Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index f1d121f23025..79601320ac3e 100644 --- a/Makefile +++ b/Makefile @@ -371,8 +371,8 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve # Files to ignore in find ... statements -RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o -export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg +RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o +export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git # =========================================================================== # Rules shared between *config targets and build targets -- GitLab From 07c1da2396632a4ad2cab41c6cd939b159f54968 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 28 Oct 2005 17:00:31 -0400 Subject: [PATCH 0639/1519] [libata sata_promise] add pci id Contributed by Daniel Mueller @ Siemens AG. --- drivers/scsi/sata_promise.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index eee93b0016df..50495569f409 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -195,6 +195,8 @@ static struct ata_port_info pdc_port_info[] = { static struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3570, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0, -- GitLab From 205cf13e0b57500e2cc6442effa991c1a63f4db7 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Sat, 17 Sep 2005 05:32:55 +1000 Subject: [PATCH 0640/1519] [PATCH] hwmon: adm9240 driver update - cleanups hwmon: adm9240 update 1/2: cleanups: o remove i2c read/write wrapper interface as it does nothing, o change kmalloc + memset to kzalloc Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adm9240.c | 92 ++++++++++++++++++++--------------------- 1 file changed, 44 insertions(+), 48 deletions(-) diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index bc7faef162f7..ecef342e5fa3 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -170,17 +170,6 @@ struct adm9240_data { u8 vrm; /* -- vrm set on startup, no accessor */ }; -/* i2c byte read/write interface */ -static int adm9240_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - return i2c_smbus_write_byte_data(client, reg, value); -} - /*** sysfs accessors ***/ /* temperature */ @@ -207,7 +196,7 @@ static ssize_t set_##value(struct device *dev, \ \ down(&data->update_lock); \ data->value = TEMP_TO_REG(temp); \ - adm9240_write_value(client, reg, data->value); \ + i2c_smbus_write_byte_data(client, reg, data->value); \ up(&data->update_lock); \ return count; \ } @@ -249,7 +238,8 @@ static ssize_t set_in_min(struct device *dev, const char *buf, down(&data->update_lock); data->in_min[nr] = IN_TO_REG(val, nr); - adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(nr), + data->in_min[nr]); up(&data->update_lock); return count; } @@ -263,7 +253,8 @@ static ssize_t set_in_max(struct device *dev, const char *buf, down(&data->update_lock); data->in_max[nr] = IN_TO_REG(val, nr); - adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(nr), + data->in_max[nr]); up(&data->update_lock); return count; } @@ -341,11 +332,11 @@ static void adm9240_write_fan_div(struct i2c_client *client, int nr, { u8 reg, old, shift = (nr + 2) * 2; - reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV); + reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); old = (reg >> shift) & 3; reg &= ~(3 << shift); reg |= (fan_div << shift); - adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg); + i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg); dev_dbg(&client->dev, "fan%d clock divider changed from %u " "to %u\n", nr + 1, 1 << old, 1 << fan_div); } @@ -406,7 +397,7 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, data->fan_div[nr] = new_div; adm9240_write_fan_div(client, nr, new_div); } - adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr), + i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr), data->fan_min[nr]); up(&data->update_lock); @@ -479,7 +470,7 @@ static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const down(&data->update_lock); data->aout = AOUT_TO_REG(val); - adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout); + i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout); up(&data->update_lock); return count; } @@ -492,7 +483,8 @@ static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, unsigned long val = simple_strtol(buf, NULL, 10); if (val == 1) { - adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80); + i2c_smbus_write_byte_data(client, + ADM9240_REG_CHASSIS_CLEAR, 0x80); dev_dbg(&client->dev, "chassis intrusion latch cleared\n"); } return count; @@ -513,11 +505,10 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct adm9240_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); @@ -533,7 +524,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) if (kind < 0) { /* verify chip: reg address should match i2c address */ - if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR) + if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR) != address) { dev_err(&adapter->dev, "detect fail: address match, " "0x%02x\n", address); @@ -541,8 +532,8 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) } /* check known chip manufacturer */ - man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID); - + man_id = i2c_smbus_read_byte_data(new_client, + ADM9240_REG_MAN_ID); if (man_id == 0x23) { kind = adm9240; } else if (man_id == 0xda) { @@ -556,7 +547,8 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) } /* successful detect, print chip info */ - die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV); + die_rev = i2c_smbus_read_byte_data(new_client, + ADM9240_REG_DIE_REV); dev_info(&adapter->dev, "found %s revision %u\n", man_id == 0x23 ? "ADM9240" : man_id == 0xda ? "DS1780" : "LM81", die_rev); @@ -654,8 +646,8 @@ static int adm9240_detach_client(struct i2c_client *client) static void adm9240_init_client(struct i2c_client *client) { struct adm9240_data *data = i2c_get_clientdata(client); - u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG); - u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3; + u8 conf = i2c_smbus_read_byte_data(client, ADM9240_REG_CONFIG); + u8 mode = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF) & 3; data->vrm = vid_which_vrm(); /* need this to report vid as mV */ @@ -672,18 +664,22 @@ static void adm9240_init_client(struct i2c_client *client) for (i = 0; i < 6; i++) { - adm9240_write_value(client, + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(i), 0); - adm9240_write_value(client, + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(i), 255); } - adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255); - adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255); - adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127); - adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127); + i2c_smbus_write_byte_data(client, + ADM9240_REG_FAN_MIN(0), 255); + i2c_smbus_write_byte_data(client, + ADM9240_REG_FAN_MIN(1), 255); + i2c_smbus_write_byte_data(client, + ADM9240_REG_TEMP_HIGH, 127); + i2c_smbus_write_byte_data(client, + ADM9240_REG_TEMP_HYST, 127); /* start measurement cycle */ - adm9240_write_value(client, ADM9240_REG_CONFIG, 1); + i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1); dev_info(&client->dev, "cold start: config was 0x%02x " "mode %u\n", conf, mode); @@ -704,25 +700,25 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) for (i = 0; i < 6; i++) /* read voltages */ { - data->in[i] = adm9240_read_value(client, + data->in[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_IN(i)); } - data->alarms = adm9240_read_value(client, + data->alarms = i2c_smbus_read_byte_data(client, ADM9240_REG_INT(0)) | - adm9240_read_value(client, + i2c_smbus_read_byte_data(client, ADM9240_REG_INT(1)) << 8; /* read temperature: assume temperature changes less than * 0.5'C per two measurement cycles thus ignore possible * but unlikely aliasing error on lsb reading. --Grant */ - data->temp = ((adm9240_read_value(client, + data->temp = ((i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP) << 8) | - adm9240_read_value(client, + i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF)) / 128; for (i = 0; i < 2; i++) /* read fans */ { - data->fan[i] = adm9240_read_value(client, + data->fan[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_FAN(i)); /* adjust fan clock divider on overflow */ @@ -747,30 +743,30 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) for (i = 0; i < 6; i++) { - data->in_min[i] = adm9240_read_value(client, + data->in_min[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_IN_MIN(i)); - data->in_max[i] = adm9240_read_value(client, + data->in_max[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_IN_MAX(i)); } for (i = 0; i < 2; i++) { - data->fan_min[i] = adm9240_read_value(client, + data->fan_min[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_FAN_MIN(i)); } - data->temp_high = adm9240_read_value(client, + data->temp_high = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_HIGH); - data->temp_hyst = adm9240_read_value(client, + data->temp_hyst = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_HYST); /* read fan divs and 5-bit VID */ - i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV); + i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); data->fan_div[0] = (i >> 4) & 3; data->fan_div[1] = (i >> 6) & 3; data->vid = i & 0x0f; - data->vid |= (adm9240_read_value(client, + data->vid |= (i2c_smbus_read_byte_data(client, ADM9240_REG_VID4) & 1) << 4; /* read analog out */ - data->aout = adm9240_read_value(client, + data->aout = i2c_smbus_read_byte_data(client, ADM9240_REG_ANALOG_OUT); data->last_updated_config = jiffies; -- GitLab From c7461a6652f40ce4f8e19d7368c7a807a618fb68 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Sat, 17 Sep 2005 05:32:57 +1000 Subject: [PATCH 0641/1519] [PATCH] hwmon: adm9240 driver update - dynamic sysfs hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks, reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1, removing the old driver macro mess. Run tested on Intel SE440BX-2 mobo. Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adm9240.c | 342 +++++++++++++++++++--------------------- 1 file changed, 166 insertions(+), 176 deletions(-) diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index ecef342e5fa3..8bb6d6e45ed5 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include #include @@ -69,8 +70,7 @@ I2C_CLIENT_INSMOD_3(adm9240, ds1780, lm81); #define ADM9240_REG_INT(nr) (0x41 + (nr)) #define ADM9240_REG_INT_MASK(nr) (0x43 + (nr)) #define ADM9240_REG_TEMP 0x27 -#define ADM9240_REG_TEMP_HIGH 0x39 -#define ADM9240_REG_TEMP_HYST 0x3a +#define ADM9240_REG_TEMP_MAX(nr) (0x39 + (nr)) /* 0, 1 = high, hyst */ #define ADM9240_REG_ANALOG_OUT 0x19 #define ADM9240_REG_CHASSIS_CLEAR 0x46 #define ADM9240_REG_VID_FAN_DIV 0x47 @@ -162,8 +162,7 @@ struct adm9240_data { u8 fan_min[2]; /* rw fan1_min */ u8 fan_div[2]; /* rw fan1_div, read-only accessor */ s16 temp; /* ro temp1_input, 9-bit sign-extended */ - s8 temp_high; /* rw temp1_max */ - s8 temp_hyst; /* rw temp1_max_hyst */ + s8 temp_max[2]; /* rw 0 -> temp_max, 1 -> temp_max_hyst */ u16 alarms; /* ro alarms */ u8 aout; /* rw aout_output */ u8 vid; /* ro vid */ @@ -173,157 +172,143 @@ struct adm9240_data { /*** sysfs accessors ***/ /* temperature */ -#define show_temp(value, scale) \ -static ssize_t show_##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct adm9240_data *data = adm9240_update_device(dev); \ - return sprintf(buf, "%d\n", data->value * scale); \ -} -show_temp(temp_high, 1000); -show_temp(temp_hyst, 1000); -show_temp(temp, 500); /* 0.5'C per bit */ - -#define set_temp(value, reg) \ -static ssize_t set_##value(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm9240_data *data = adm9240_update_device(dev); \ - long temp = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_TO_REG(temp); \ - i2c_smbus_write_byte_data(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} - -set_temp(temp_high, ADM9240_REG_TEMP_HIGH); -set_temp(temp_hyst, ADM9240_REG_TEMP_HYST); - -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - show_temp_high, set_temp_high); -static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, - show_temp_hyst, set_temp_hyst); +static ssize_t show_temp(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", data->temp * 500); /* 9-bit value */ +} + +static ssize_t show_max(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", data->temp_max[attr->index] * 1000); +} + +static ssize_t set_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adm9240_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_max[attr->index] = TEMP_TO_REG(val); + i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index), + data->temp_max[attr->index]); + up(&data->update_lock); + return count; +} + static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_max, set_max, 0); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + show_max, set_max, 1); /* voltage */ -static ssize_t show_in(struct device *dev, char *buf, int nr) +static ssize_t show_in(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr)); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index], + attr->index)); } -static ssize_t show_in_min(struct device *dev, char *buf, int nr) +static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr)); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index], + attr->index)); } -static ssize_t show_in_max(struct device *dev, char *buf, int nr) +static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr)); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index], + attr->index)); } -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val, nr); - i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(nr), - data->in_min[nr]); + data->in_min[attr->index] = IN_TO_REG(val, attr->index); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index), + data->in_min[attr->index]); up(&data->update_lock); return count; } -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val, nr); - i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(nr), - data->in_max[nr]); + data->in_max[attr->index] = IN_TO_REG(val, attr->index); + i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index), + data->in_max[attr->index]); up(&data->update_lock); return count; } -#define show_in_offset(offset) \ -static ssize_t show_in##offset(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); \ -static ssize_t show_in##offset##_min(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t show_in##offset##_max(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t \ -set_in##offset##_min(struct device *dev, \ - struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t \ -set_in##offset##_max(struct device *dev, \ - struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); -show_in_offset(5); +#define vin(nr) \ +static SENSOR_DEVICE_ATTR(in##nr##_input, S_IRUGO, \ + show_in, NULL, nr); \ +static SENSOR_DEVICE_ATTR(in##nr##_min, S_IRUGO | S_IWUSR, \ + show_in_min, set_in_min, nr); \ +static SENSOR_DEVICE_ATTR(in##nr##_max, S_IRUGO | S_IWUSR, \ + show_in_max, set_in_max, nr); + +vin(0); +vin(1); +vin(2); +vin(3); +vin(4); +vin(5); /* fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) +static ssize_t show_fan(struct device *dev, + struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - 1 << data->fan_div[nr])); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index], + 1 << data->fan_div[attr->index])); } -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], - 1 << data->fan_div[nr])); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[attr->index], + 1 << data->fan_div[attr->index])); } -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +static ssize_t show_fan_div(struct device *dev, + struct device_attribute *devattr, char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", 1 << data->fan_div[nr]); + return sprintf(buf, "%d\n", 1 << data->fan_div[attr->index]); } /* write new fan div, callers must hold data->update_lock */ @@ -352,12 +337,15 @@ static void adm9240_write_fan_div(struct i2c_client *client, int nr, * - otherwise: select fan clock divider to suit fan speed low limit, * measurement code may adjust registers to ensure fan speed reading */ -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adm9240_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); + int nr = attr->index; u8 new_div; down(&data->update_lock); @@ -404,40 +392,16 @@ static ssize_t set_fan_min(struct device *dev, const char *buf, return count; } -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ -return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan_##offset, NULL); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ - show_fan_##offset##_div, NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); - -show_fan_offset(1); -show_fan_offset(2); +#define fan(nr) \ +static SENSOR_DEVICE_ATTR(fan##nr##_input, S_IRUGO, \ + show_fan, NULL, nr - 1); \ +static SENSOR_DEVICE_ATTR(fan##nr##_div, S_IRUGO, \ + show_fan_div, NULL, nr - 1); \ +static SENSOR_DEVICE_ATTR(fan##nr##_min, S_IRUGO | S_IWUSR, \ + show_fan_min, set_fan_min, nr - 1); + +fan(1); +fan(2); /* alarms */ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) @@ -580,33 +544,59 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_detach; } - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, + &sensor_dev_attr_in0_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in0_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in0_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in1_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in1_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in2_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in2_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in2_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in3_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in3_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in3_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in4_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in4_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in4_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in5_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in5_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_in5_max.dev_attr); device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max_hyst.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_div.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan1_min.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_div.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_fan2_min.dev_attr); device_create_file(&new_client->dev, &dev_attr_alarms); device_create_file(&new_client->dev, &dev_attr_aout_output); device_create_file(&new_client->dev, &dev_attr_chassis_clear); @@ -674,9 +664,9 @@ static void adm9240_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(1), 255); i2c_smbus_write_byte_data(client, - ADM9240_REG_TEMP_HIGH, 127); + ADM9240_REG_TEMP_MAX(0), 127); i2c_smbus_write_byte_data(client, - ADM9240_REG_TEMP_HYST, 127); + ADM9240_REG_TEMP_MAX(1), 127); /* start measurement cycle */ i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1); @@ -753,10 +743,10 @@ static struct adm9240_data *adm9240_update_device(struct device *dev) data->fan_min[i] = i2c_smbus_read_byte_data(client, ADM9240_REG_FAN_MIN(i)); } - data->temp_high = i2c_smbus_read_byte_data(client, - ADM9240_REG_TEMP_HIGH); - data->temp_hyst = i2c_smbus_read_byte_data(client, - ADM9240_REG_TEMP_HYST); + data->temp_max[0] = i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP_MAX(0)); + data->temp_max[1] = i2c_smbus_read_byte_data(client, + ADM9240_REG_TEMP_MAX(1)); /* read fan divs and 5-bit VID */ i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV); -- GitLab From 088341bd0c78143bf82ff21f7f0a715f99568c73 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 10 Sep 2005 23:00:46 +0200 Subject: [PATCH 0642/1519] [PATCH] hwmon: via686a: save 0.5k by long v[256] -> s16 v[256] We can save 0.5kB of data in the via686a driver. From: Denis Vlasenko Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/via686a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 05ddc88e7dd2..60e94879f415 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -198,7 +198,7 @@ static inline u8 FAN_TO_REG(long rpm, int div) but the function is very linear in the useful range (0-80 deg C), so we'll just use linear interpolation for 10-bit readings.) So, tempLUT is the temp at via register values 0-255: */ -static const long tempLUT[] = +static const s16 tempLUT[] = { -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519, -503, -487, -471, -456, -442, -428, -414, -400, -387, -375, -362, -350, -339, -327, -316, -305, -295, -285, -275, -265, @@ -270,7 +270,7 @@ static inline u8 TEMP_TO_REG(long val) } /* for 8-bit temperature hyst and over registers */ -#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100) +#define TEMP_FROM_REG(val) ((long)tempLUT[val] * 100) /* for 10-bit temperature readings */ static inline long TEMP_FROM_REG10(u16 val) -- GitLab From e415e48b68155bea8b5452113dedba4ec486f3f6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:14:18 +0200 Subject: [PATCH 0643/1519] [PATCH] hwmon: adm9240 whitespace cleanups This whitespace cleanup patch removes one trailing space and breaks lines longer than 80 characters. Signed-off-by: Grant Coady Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/adm9240.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) --- drivers/hwmon/adm9240.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 8bb6d6e45ed5..11dc95f8a17e 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -219,8 +219,8 @@ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, attr->index)); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, - char *buf) +static ssize_t show_in_min(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -228,8 +228,8 @@ static ssize_t show_in_min(struct device *dev, struct device_attribute *devattr, attr->index)); } -static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, - char *buf) +static ssize_t show_in_max(struct device *dev, + struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct adm9240_data *data = adm9240_update_device(dev); @@ -237,7 +237,8 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *devattr, attr->index)); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, +static ssize_t set_in_min(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -253,7 +254,8 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *devattr, return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *devattr, +static ssize_t set_in_max(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -326,7 +328,7 @@ static void adm9240_write_fan_div(struct i2c_client *client, int nr, "to %u\n", nr + 1, 1 << old, 1 << fan_div); } -/* +/* * set fan speed low limit: * * - value is zero: disable fan speed low limit alarm @@ -404,7 +406,8 @@ fan(1); fan(2); /* alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms(struct device *dev, + struct device_attribute *attr, char *buf) { struct adm9240_data *data = adm9240_update_device(dev); return sprintf(buf, "%u\n", data->alarms); @@ -412,7 +415,8 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); /* vid */ -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_vid(struct device *dev, + struct device_attribute *attr, char *buf) { struct adm9240_data *data = adm9240_update_device(dev); return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); @@ -420,13 +424,16 @@ static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); /* analog output */ -static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_aout(struct device *dev, + struct device_attribute *attr, char *buf) { struct adm9240_data *data = adm9240_update_device(dev); return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); } -static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t set_aout(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct adm9240_data *data = i2c_get_clientdata(client); @@ -441,7 +448,9 @@ static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); /* chassis_clear */ -static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t chassis_clear(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); unsigned long val = simple_strtol(buf, NULL, 10); -- GitLab From b918ecd2429e1a89b846d9e49ca4520b963c13e8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:18:49 +0200 Subject: [PATCH 0644/1519] [PATCH] hwmon: Do not forcibly enable via686a by default Do not enable the VIA VT82C686A/B integrated sensors by default, as disabled sensors usually means that this feature is not used so the values won't make any sense. This has been confusing many users in the past: http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052 It is still possible to forcibly enable the sensors by using the force_addr module parameter. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/hwmon/via686a | 17 +++++++++++++++-- drivers/hwmon/via686a.c | 18 +++++++++++------- 2 files changed, 26 insertions(+), 9 deletions(-) --- Documentation/hwmon/via686a | 17 +++++++++++++++-- drivers/hwmon/via686a.c | 18 +++++++++++------- 2 files changed, 26 insertions(+), 9 deletions(-) diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a index b82014cb7c53..a936fb3824b2 100644 --- a/Documentation/hwmon/via686a +++ b/Documentation/hwmon/via686a @@ -18,8 +18,9 @@ Authors: Module Parameters ----------------- -force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards - that don't set the address in the BIOS. Does not do a +force_addr=0xaddr Set the I/O base address. Useful for boards that + don't set the address in the BIOS. Look for a BIOS + upgrade before resorting to this. Does not do a PCI force; the via686a must still be present in lspci. Don't use this unless the driver complains that the base address is not set. @@ -63,3 +64,15 @@ miss once-only alarms. The driver only updates its values each 1.5 seconds; reading it more often will do no harm, but will return 'old' values. + +Known Issues +------------ + +This driver handles sensors integrated in some VIA south bridges. It is +possible that a motherboard maker used a VT82C686A/B chip as part of a +product design but was not interested in its hardware monitoring features, +in which case the sensor inputs will not be wired. This is the case of +the Asus K7V, A7V and A7V133 motherboards, to name only a few of them. +So, if you need the force_addr parameter, and end up with values which +don't seem to make any sense, don't look any further: your chip is simply +not wired for hardware monitoring. diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 60e94879f415..688ccf924c3a 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -589,10 +589,8 @@ static int via686a_detect(struct i2c_adapter *adapter) u16 val; /* 8231 requires multiple of 256, we enforce that on 686 as well */ - if (force_addr) - address = force_addr & 0xFF00; - if (force_addr) { + address = force_addr & 0xFF00; dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address); if (PCIBIOS_SUCCESSFUL != @@ -603,11 +601,17 @@ static int via686a_detect(struct i2c_adapter *adapter) pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val)) return -ENODEV; if (!(val & 0x0001)) { - dev_warn(&adapter->dev, "enabling sensors\n"); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(s_bridge, VIA686A_ENABLE_REG, - val | 0x0001)) + if (force_addr) { + dev_info(&adapter->dev, "enabling sensors\n"); + if (PCIBIOS_SUCCESSFUL != + pci_write_config_word(s_bridge, VIA686A_ENABLE_REG, + val | 0x0001)) + return -ENODEV; + } else { + dev_warn(&adapter->dev, "sensors disabled - enable " + "with force_addr=0x%x\n", address); return -ENODEV; + } } /* Reserve the ISA region */ -- GitLab From 605070952f0b41caaa211c47b02eeac703529008 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:23:07 +0200 Subject: [PATCH 0645/1519] [PATCH] i2c: Discard explicit static initializations to 0 Kill explicit static initializations to 0 in 10 i2c drivers. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/algos/i2c-algo-pca.c | 2 +- drivers/i2c/algos/i2c-algo-sibyte.c | 2 +- drivers/i2c/busses/i2c-ali15x3.c | 4 ++-- drivers/i2c/busses/i2c-amd756.c | 2 +- drivers/i2c/busses/i2c-iop3xx.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 8 ++++---- drivers/i2c/busses/i2c-sis5595.c | 4 ++-- drivers/i2c/busses/i2c-sis630.c | 2 +- drivers/i2c/busses/i2c-sis96x.c | 2 +- drivers/i2c/busses/i2c-via.c | 2 +- 10 files changed, 15 insertions(+), 15 deletions(-) --- drivers/i2c/algos/i2c-algo-pca.c | 2 +- drivers/i2c/algos/i2c-algo-sibyte.c | 2 +- drivers/i2c/busses/i2c-ali15x3.c | 4 ++-- drivers/i2c/busses/i2c-amd756.c | 2 +- drivers/i2c/busses/i2c-iop3xx.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 8 ++++---- drivers/i2c/busses/i2c-sis5595.c | 4 ++-- drivers/i2c/busses/i2c-sis630.c | 2 +- drivers/i2c/busses/i2c-sis96x.c | 2 +- drivers/i2c/busses/i2c-via.c | 2 +- 10 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index beb10edfe9c1..82946acab4c7 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -34,7 +34,7 @@ #define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0) #define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0) -static int i2c_debug=0; +static int i2c_debug; #define pca_outw(adap, reg, val) adap->write_byte(adap, reg, val) #define pca_inw(adap, reg) adap->read_byte(adap, reg) diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c index 8ed5ad12552f..938848ae162d 100644 --- a/drivers/i2c/algos/i2c-algo-sibyte.c +++ b/drivers/i2c/algos/i2c-algo-sibyte.c @@ -42,7 +42,7 @@ /* module parameters: */ -static int bit_scan=0; /* have a look at what's hanging 'round */ +static int bit_scan; /* have a look at what's hanging 'round */ static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index b3f50bff39a0..e13d60c120b9 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -125,12 +125,12 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static u16 force_addr = 0; +static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); -static unsigned short ali15x3_smba = 0; +static unsigned short ali15x3_smba; static int ali15x3_setup(struct pci_dev *ALI15X3_dev) { diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 6ad0603384b8..3bbac2f8ce38 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -86,7 +86,7 @@ #define AMD756_BLOCK_DATA 0x05 -static unsigned short amd756_ioport = 0; +static unsigned short amd756_ioport; /* SMBUS event = I/O 28-29 bit 11 diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 7bd9102db701..745e3a51f3e5 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -43,7 +43,7 @@ #include "i2c-iop3xx.h" /* global unit counter */ -static int i2c_id = 0; +static int i2c_id; static inline unsigned char iic_cook_addr(struct i2c_msg *msg) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 6d48a4da7bed..1b2d3ebd1075 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -90,13 +90,13 @@ struct sd { /* If force is set to anything different from 0, we forcibly enable the PIIX4. DANGEROUS! */ -static int force = 0; +static int force; module_param (force, int, 0); MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the PIIX4 at the given address. VERY DANGEROUS! */ -static int force_addr = 0; +static int force_addr; module_param (force_addr, int, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " @@ -104,14 +104,14 @@ MODULE_PARM_DESC(force_addr, /* If fix_hstcfg is set to anything different from 0, we reset one of the registers to be a valid value. */ -static int fix_hstcfg = 0; +static int fix_hstcfg; module_param (fix_hstcfg, int, 0); MODULE_PARM_DESC(fix_hstcfg, "Fix config register. Needed on some boards (Force CPCI735)."); static int piix4_transaction(void); -static unsigned short piix4_smba = 0; +static unsigned short piix4_smba; static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_table[] = { diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 080318d6f54b..3fd38f4673e3 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -123,11 +123,11 @@ static int blacklist[] = { /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static u16 force_addr = 0; +static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); -static unsigned short sis5595_base = 0; +static unsigned short sis5595_base; static u8 sis5595_read(u8 reg) { diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 86f0f448fa0b..44c4e68e9a98 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -101,7 +101,7 @@ module_param(force, bool, 0); MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!"); /* acpi base address */ -static unsigned short acpi_base = 0; +static unsigned short acpi_base; /* supported chips */ static int supported[] = { diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index ead2ff3cf60e..9ddd910c3b99 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -83,7 +83,7 @@ #define SIS96x_BLOCK_DATA 0x05 static struct i2c_adapter sis96x_adapter; -static u16 sis96x_smbus_base = 0; +static u16 sis96x_smbus_base; static inline u8 sis96x_read(u8 reg) { diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 040b8abeabba..0b3edd4e6c12 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -45,7 +45,7 @@ #define IOSPACE 0x06 #define IOTEXT "via-i2c" -static u16 pm_io_base = 0; +static u16 pm_io_base; /* It does not appear from the datasheet that the GPIO pins are -- GitLab From 0200296310a454b39efc995e676f9ff60e641edb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:26:44 +0200 Subject: [PATCH 0646/1519] [PATCH] hwmon: Discard explicit static initializations to 0 Kill explicit static initializations to 0 in 2 hwmon drivers. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/via686a.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) --- drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/via686a.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index e928cdb041cb..58aee3a00caa 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -121,7 +121,7 @@ static int adm1021_write_value(struct i2c_client *client, u8 reg, static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ -static int read_only = 0; +static int read_only; /* This is the driver that will be inserted */ diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 688ccf924c3a..54861f13fee2 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -44,7 +44,7 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ -static unsigned short force_addr = 0; +static unsigned short force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the sensors"); -- GitLab From 7d845b10d06fa20a595a5161edabc5e846ed28a6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:29:38 +0200 Subject: [PATCH 0647/1519] [PATCH] hwmon: Discard bogus comment about init setting limits Discard a common out-of-date comment in 5 hardware monitoring drivers. The hardware monitoring chip drivers are no more setting sensor limits at initialization time, for quite some time already. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/lm78.c | 1 - drivers/hwmon/via686a.c | 1 - drivers/hwmon/w83627hf.c | 1 - drivers/hwmon/w83781d.c | 1 - drivers/hwmon/w83792d.c | 1 - 5 files changed, 5 deletions(-) --- drivers/hwmon/lm78.c | 1 - drivers/hwmon/via686a.c | 1 - drivers/hwmon/w83627hf.c | 1 - drivers/hwmon/w83781d.c | 1 - drivers/hwmon/w83792d.c | 1 - 5 files changed, 5 deletions(-) diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index f6730dc3573b..d697a554286f 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -726,7 +726,6 @@ static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value) return i2c_smbus_write_byte_data(client, reg, value); } -/* Called when we have found a new LM78. It should set limits, etc. */ static void lm78_init_client(struct i2c_client *client) { u8 config = lm78_read_value(client, LM78_REG_CONFIG); diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index 54861f13fee2..c6e64f4abdea 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -712,7 +712,6 @@ static int via686a_detach_client(struct i2c_client *client) return 0; } -/* Called when we have found a new VIA686A. Set limits, etc. */ static void via686a_init_client(struct i2c_client *client) { u8 reg; diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 3479dc5208e2..7f6f7280878d 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1275,7 +1275,6 @@ static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value) return 0; } -/* Called when we have found a new W83781D. It should set limits, etc. */ static void w83627hf_init_client(struct i2c_client *client) { struct w83627hf_data *data = i2c_get_clientdata(client); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 4c43337ca780..26b1fac7c619 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1451,7 +1451,6 @@ w83781d_write_value(struct i2c_client *client, u16 reg, u16 value) return 0; } -/* Called when we have found a new W83781D. It should set limits, etc. */ static void w83781d_init_client(struct i2c_client *client) { diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index ba0c28015f6a..7bbd1888ce94 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -1429,7 +1429,6 @@ w83792d_write_value(struct i2c_client *client, u8 reg, u8 value) return 0; } -/* Called when we have found a new W83792D. It should set limits, etc. */ static void w83792d_init_client(struct i2c_client *client) { -- GitLab From d6072f842a77014220683ee5b781b7cee8f020d1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:37:04 +0200 Subject: [PATCH 0648/1519] [PATCH] i2c: Reuse name strings in i2c bus drivers Clean up name string usage in 12 i2c bus drivers: * Use the i2c_adapter name for requesting the I/O region rather than redefining a new string. * Do not initialize the i2c_adapter name to "unset". This should save a few data bytes here and there. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-ali1535.c | 6 +++--- drivers/i2c/busses/i2c-ali1563.c | 6 ++++-- drivers/i2c/busses/i2c-ali15x3.c | 5 +++-- drivers/i2c/busses/i2c-amd756.c | 5 ++--- drivers/i2c/busses/i2c-amd8111.c | 4 +++- drivers/i2c/busses/i2c-i801.c | 4 ++-- drivers/i2c/busses/i2c-nforce2.c | 4 ++-- drivers/i2c/busses/i2c-piix4.c | 4 ++-- drivers/i2c/busses/i2c-sis5595.c | 5 +++-- drivers/i2c/busses/i2c-sis630.c | 6 ++++-- drivers/i2c/busses/i2c-sis96x.c | 5 +++-- drivers/i2c/busses/i2c-via.c | 4 ++-- 12 files changed, 33 insertions(+), 25 deletions(-) --- drivers/i2c/busses/i2c-ali1535.c | 6 +++--- drivers/i2c/busses/i2c-ali1563.c | 6 ++++-- drivers/i2c/busses/i2c-ali15x3.c | 5 +++-- drivers/i2c/busses/i2c-amd756.c | 5 ++--- drivers/i2c/busses/i2c-amd8111.c | 4 +++- drivers/i2c/busses/i2c-i801.c | 4 ++-- drivers/i2c/busses/i2c-nforce2.c | 4 ++-- drivers/i2c/busses/i2c-piix4.c | 4 ++-- drivers/i2c/busses/i2c-sis5595.c | 5 +++-- drivers/i2c/busses/i2c-sis630.c | 6 ++++-- drivers/i2c/busses/i2c-sis96x.c | 5 +++-- drivers/i2c/busses/i2c-via.c | 4 ++-- 12 files changed, 33 insertions(+), 25 deletions(-) diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index f021acd2674e..3eb47890db40 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -134,7 +134,7 @@ /* -> Read = 1 */ #define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */ - +static struct pci_driver ali1535_driver; static unsigned short ali1535_smba; static DECLARE_MUTEX(i2c_ali1535_sem); @@ -162,7 +162,8 @@ static int ali1535_setup(struct pci_dev *dev) goto exit; } - if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) { + if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, + ali1535_driver.name)) { dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n", ali1535_smba); goto exit; @@ -480,7 +481,6 @@ static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id ali1535_ids[] = { diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 86947504aea1..e6f63208fc4a 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -60,6 +60,7 @@ #define HST_CNTL2_SIZEMASK 0x38 +static struct pci_driver ali1563_pci_driver; static unsigned short ali1563_smba; static int ali1563_transaction(struct i2c_adapter * a, int size) @@ -350,7 +351,8 @@ static int __devinit ali1563_setup(struct pci_dev * dev) dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); goto Err; } - if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) { + if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, + ali1563_pci_driver.name)) { dev_warn(&dev->dev,"Could not allocate I/O space"); goto Err; } @@ -406,7 +408,7 @@ static struct pci_device_id __devinitdata ali1563_id_table[] = { MODULE_DEVICE_TABLE (pci, ali1563_id_table); static struct pci_driver ali1563_pci_driver = { - .name = "ali1563_i2c", + .name = "ali1563_smbus", .id_table = ali1563_id_table, .probe = ali1563_probe, .remove = __devexit_p(ali1563_remove), diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index e13d60c120b9..7a5c0941dbc1 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -130,6 +130,7 @@ module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); +static struct pci_driver ali15x3_driver; static unsigned short ali15x3_smba; static int ali15x3_setup(struct pci_dev *ALI15X3_dev) @@ -166,7 +167,8 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev) if(force_addr) ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1); - if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) { + if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, + ali15x3_driver.name)) { dev_err(&ALI15X3_dev->dev, "ALI15X3_smb region 0x%x already in use!\n", ali15x3_smba); @@ -470,7 +472,6 @@ static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id ali15x3_ids[] = { diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 3bbac2f8ce38..1750dedaf4b5 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -85,7 +85,7 @@ #define AMD756_PROCESS_CALL 0x04 #define AMD756_BLOCK_DATA 0x05 - +static struct pci_driver amd756_driver; static unsigned short amd756_ioport; /* @@ -303,7 +303,6 @@ struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 }; @@ -365,7 +364,7 @@ static int __devinit amd756_probe(struct pci_dev *pdev, amd756_ioport += SMB_ADDR_OFFSET; } - if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) { + if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) { dev_err(&pdev->dev, "SMB region 0x%x already in use!\n", amd756_ioport); return -ENODEV; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 45ea24ba14d5..49ff11e5134f 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -30,6 +30,8 @@ struct amd_smbus { int size; }; +static struct pci_driver amd8111_driver; + /* * AMD PCI control registers definitions. */ @@ -352,7 +354,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); - if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0")) + if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) goto out_kfree; smbus->adapter.owner = THIS_MODULE; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 709beab76609..588583530c9f 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -110,6 +110,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, int command); static unsigned short i801_smba; +static struct pci_driver i801_driver; static struct pci_dev *I801_dev; static int isich4; @@ -143,7 +144,7 @@ static int i801_setup(struct pci_dev *dev) } } - if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) { + if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) { dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n", i801_smba); error_return = -EBUSY; @@ -543,7 +544,6 @@ static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id i801_ids[] = { diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index fe9c0f42a2b7..dd4b6d8e03ef 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -97,6 +97,7 @@ struct nforce2_smbus { #define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a #define NVIDIA_SMB_PRTCL_PEC 0x80 +static struct pci_driver nforce2_driver; static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, @@ -113,7 +114,6 @@ static struct i2c_adapter nforce2_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; /* Return -1 on error. See smbus.h for more information */ @@ -285,7 +285,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg, smbus->base = iobase & 0xfffc; smbus->size = 8; - if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) { + if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", smbus->base, smbus->base+smbus->size-1, name); return -1; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 1b2d3ebd1075..692f47345481 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -112,6 +112,7 @@ MODULE_PARM_DESC(fix_hstcfg, static int piix4_transaction(void); static unsigned short piix4_smba; +static struct pci_driver piix4_driver; static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_table[] = { @@ -157,7 +158,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, } } - if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) { + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n", piix4_smba); return -ENODEV; @@ -407,7 +408,6 @@ static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id piix4_ids[] = { diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 3fd38f4673e3..b57ab74d23ec 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -127,6 +127,7 @@ static u16 force_addr; module_param(force_addr, ushort, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); +static struct pci_driver sis5595_driver; static unsigned short sis5595_base; static u8 sis5595_read(u8 reg) @@ -172,7 +173,8 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev) /* NB: We grab just the two SMBus registers here, but this may still * interfere with ACPI :-( */ - if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) { + if (!request_region(sis5595_base + SMB_INDEX, 2, + sis5595_driver.name)) { dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n", sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1); return -ENODEV; @@ -364,7 +366,6 @@ static struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .name = "unset", .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 44c4e68e9a98..acb75e282414 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -92,6 +92,8 @@ #define SIS630_PCALL 0x04 #define SIS630_BLOCK_DATA 0x05 +static struct pci_driver sis630_driver; + /* insmod parameters */ static int high_clock; static int force; @@ -432,7 +434,8 @@ static int sis630_setup(struct pci_dev *sis630_dev) dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base); /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) { + if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, + sis630_driver.name)) { dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already " "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA); goto exit; @@ -455,7 +458,6 @@ static struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .name = "unset", .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 9ddd910c3b99..3024907cdafe 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -82,6 +82,7 @@ #define SIS96x_PROC_CALL 0x04 #define SIS96x_BLOCK_DATA 0x05 +static struct pci_driver sis96x_driver; static struct i2c_adapter sis96x_adapter; static u16 sis96x_smbus_base; @@ -257,7 +258,6 @@ static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static struct pci_device_id sis96x_ids[] = { @@ -294,7 +294,8 @@ static int __devinit sis96x_probe(struct pci_dev *dev, sis96x_smbus_base); /* Everything is happy, let's grab the memory and set things up. */ - if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) { + if (!request_region(sis96x_smbus_base, SMB_IOSIZE, + sis96x_driver.name)) { dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x " "already in use!\n", sis96x_smbus_base, sis96x_smbus_base + SMB_IOSIZE - 1); diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 0b3edd4e6c12..484bbacfce6b 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -43,8 +43,8 @@ /* io-region reservation */ #define IOSPACE 0x06 -#define IOTEXT "via-i2c" +static struct pci_driver vt586b_driver; static u16 pm_io_base; /* @@ -130,7 +130,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i pci_read_config_word(dev, base, &pm_io_base); pm_io_base &= (0xff << 8); - if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) { + if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) { dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE); return -ENODEV; } -- GitLab From 709439a284bc5b7d42a70fee7119feb186c1ca99 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:41:18 +0200 Subject: [PATCH 0649/1519] [PATCH] hwmon: w83l785ts converted to dynamic sysfs callbacks Convert the w83l785ts driver to use dynamic sysfs callbacks. This is a small driver so the benefit is thin, but still worth it. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/w83l785ts.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) --- drivers/hwmon/w83l785ts.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 133e34ab1d0a..fcb2c39b04fd 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -37,6 +37,7 @@ #include #include #include +#include #include /* How many retries on register read error */ @@ -111,27 +112,24 @@ struct w83l785ts_data { unsigned long last_updated; /* in jiffies */ /* registers values */ - u8 temp, temp_over; + u8 temp[2]; /* 0: input + 1: critical limit */ }; /* * Sysfs stuff */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) { + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct w83l785ts_data *data = w83l785ts_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); } -static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83l785ts_data *data = w83l785ts_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1); /* * Real code @@ -228,7 +226,7 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) init_MUTEX(&data->update_lock); /* Default values in case the first read fails (unlikely). */ - data->temp_over = data->temp = 0; + data->temp[1] = data->temp[0] = 0; /* Tell the I2C layer a new client has arrived. */ if ((err = i2c_attach_client(new_client))) @@ -246,8 +244,10 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_detach; } - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_input.dev_attr); + device_create_file(&new_client->dev, + &sensor_dev_attr_temp1_max.dev_attr); return 0; @@ -305,10 +305,10 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { dev_dbg(&client->dev, "Updating w83l785ts data.\n"); - data->temp = w83l785ts_read_value(client, - W83L785TS_REG_TEMP, data->temp); - data->temp_over = w83l785ts_read_value(client, - W83L785TS_REG_TEMP_OVER, data->temp_over); + data->temp[0] = w83l785ts_read_value(client, + W83L785TS_REG_TEMP, data->temp[0]); + data->temp[1] = w83l785ts_read_value(client, + W83L785TS_REG_TEMP_OVER, data->temp[1]); data->last_updated = jiffies; data->valid = 1; -- GitLab From cb929eae78ec0b243dbf58039bce4af354f6020c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:45:03 +0200 Subject: [PATCH 0650/1519] [PATCH] hwmon: Minor w83l785ts optimization Using s8 instead of u8 to store temperature register values saves a few instructions on sysfs file read. The very same was done for several other drivers a while ago (lm63, lm83, lm90...) Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/hwmon/w83l785ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- drivers/hwmon/w83l785ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index fcb2c39b04fd..db12a620b331 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -74,7 +74,7 @@ I2C_CLIENT_INSMOD_1(w83l785ts); * The W83L785TS-S uses signed 8-bit values. */ -#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) +#define TEMP_FROM_REG(val) ((val) * 1000) /* * Functions declaration @@ -112,7 +112,7 @@ struct w83l785ts_data { unsigned long last_updated; /* in jiffies */ /* registers values */ - u8 temp[2]; /* 0: input + s8 temp[2]; /* 0: input 1: critical limit */ }; -- GitLab From 4366dc946c01305cff49b07dabb806d2364f1edb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:50:06 +0200 Subject: [PATCH 0651/1519] [PATCH] i2c: Adjust i2c_probe() for busses without SMBUS_QUICK Move the check for SMBUS_QUICK in i2c_probe() after the forced addresses have been handled. This makes it possible for a driver to leave the probed address lists empty, only providing forced addresses, and get i2c_probe to work even if the bus doesn't support SMBUS_QUICK. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/i2c-core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) --- drivers/i2c/i2c-core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 45aa0e54e297..b55097d57b7a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -706,10 +706,6 @@ int i2c_probe(struct i2c_adapter *adapter, int i, err; int adap_id = i2c_adapter_id(adapter); - /* Forget it if we can't probe using SMBUS_QUICK */ - if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK)) - return -1; - /* Force entries are done first, and are not affected by ignore entries */ if (address_data->forces) { @@ -736,6 +732,17 @@ int i2c_probe(struct i2c_adapter *adapter, } } + /* Stop here if we can't use SMBUS_QUICK */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) { + if (address_data->probe[0] == I2C_CLIENT_END + && address_data->normal_i2c[0] == I2C_CLIENT_END) + return 0; + + dev_warn(&adapter->dev, "SMBus Quick command not supported, " + "can't probe for chips\n"); + return -1; + } + /* Probe entries are done second, and are not affected by ignore entries either */ for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) { -- GitLab From d057c96cab72bc6b70570d25b90404f81d98e886 Mon Sep 17 00:00:00 2001 From: Hideki Iwamoto Date: Sun, 25 Sep 2005 16:53:04 +0200 Subject: [PATCH 0652/1519] [PATCH] i2c: Fix I2C_FUNC_PROTOCOL_MANGLING documentation Fix the description of I2C_FUNC_PROTOCOL_MANGLING. From: Hideki Iwamoto Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/i2c/functionality | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) --- Documentation/i2c/functionality | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality index 41ffefbdc60c..60cca249e452 100644 --- a/Documentation/i2c/functionality +++ b/Documentation/i2c/functionality @@ -17,9 +17,10 @@ For the most up-to-date list of functionality constants, please check I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus adapters typically can not do these) I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions - I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_REV_DIR_ADDR, - I2C_M_REV_DIR_ADDR and I2C_M_REV_DIR_NOSTART - flags (which modify the i2c protocol!) + I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_IGNORE_NAK, + I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and + I2C_M_NO_RD_ACK flags (which modify the + I2C protocol!) I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command -- GitLab From 332bf92b3338e140cbcfc25f69911e8ca59788c7 Mon Sep 17 00:00:00 2001 From: Hideki Iwamoto Date: Sun, 25 Sep 2005 16:56:43 +0200 Subject: [PATCH 0653/1519] [PATCH] i2c: Fix union i2c_smbus_data definition The i2c_smbus_data union block member has a comment stating that an extra byte is required for SMBus Block Process Call transactions. This has been true for three weeks around June 2002, but no more since, so it is about time that we drop this comment and fix the definition. From: Hideki Iwamoto Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman include/linux/i2c.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- include/linux/i2c.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 3d49a305bf88..17d63c1efdce 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -454,8 +454,7 @@ struct i2c_msg { union i2c_smbus_data { __u8 byte; __u16 word; - __u8 block[I2C_SMBUS_BLOCK_MAX + 3]; /* block[0] is used for length */ - /* one more for read length in block process call */ + __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ /* and one more for PEC */ }; -- GitLab From 0f69a612f950f7508e556bf1b09390087d112115 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Sep 2005 16:58:22 +0200 Subject: [PATCH 0654/1519] [PATCH] i2c: Minor i2c-amd8111 cleanup I noticed a useless instruction in the i2c-amd8111 driver. Signed-off-by: Jean Delvare CC: Vojtech Pavlik Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-amd8111.c | 1 - 1 file changed, 1 deletion(-) --- drivers/i2c/busses/i2c-amd8111.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 49ff11e5134f..6200c9a087ad 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -244,7 +244,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl break; case I2C_SMBUS_BLOCK_PROC_CALL: - protocol |= pec; len = min_t(u8, data->block[0], 31); amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); -- GitLab From 5c50d1885981537ff3b8df6433951de6c9cb72cb Mon Sep 17 00:00:00 2001 From: Hideki Iwamoto Date: Sun, 25 Sep 2005 17:01:11 +0200 Subject: [PATCH 0655/1519] [PATCH] i2c: Several PEC-related fixes in software SMBus emulation Fix several errors in I2C SMBus emulation when PEC is used: * Weird logic error in SMBus Write Word transactions. * Wrong buffer size, affecting SMBus Block Write transactions. * Potential buffer overrun in SMBus Block Write transactions. From: Hideki Iwamoto Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/i2c-core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- drivers/i2c/i2c-core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b55097d57b7a..9583a54ce16b 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -864,7 +864,7 @@ static int i2c_smbus_add_pec(u16 addr, u8 command, int size, break; case I2C_SMBUS_BYTE_DATA: buf[2] = data->byte; - data->word = buf[2] || + data->word = buf[2] | (i2c_smbus_pec(3, buf, NULL) << 8); size = I2C_SMBUS_WORD_DATA; break; @@ -1033,8 +1033,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, need to use only one message; when reading, we need two. We initialize most things with sane defaults, to keep the code below somewhat simpler. */ - unsigned char msgbuf0[34]; - unsigned char msgbuf1[34]; + unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; + unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; int num = read_write == I2C_SMBUS_READ?2:1; struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, { addr, flags | I2C_M_RD, 0, msgbuf1 } @@ -1097,7 +1097,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, } if(size == I2C_SMBUS_BLOCK_DATA_PEC) (msg[0].len)++; - for (i = 1; i <= msg[0].len; i++) + for (i = 1; i < msg[0].len; i++) msgbuf0[i] = data->block[i-1]; } break; -- GitLab From 32c0a520f506c046f241de2a3a9b02a395ef76d2 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 21:47:58 +0200 Subject: [PATCH 0656/1519] [PATCH] i2c-viapro: New maintainer I am taking over the maintenance of the i2c-viapro SMBus driver. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 248b93b32fc4..3928dc7d6ea9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2736,6 +2736,12 @@ P: Roger Luethi M: rl@hellgate.ch S: Maintained +VIAPRO SMBUS DRIVER +P: Jean Delvare +M: khali@linux-fr.org +L: lm-sensors@lm-sensors.org +S: Maintained + UCLINUX (AND M68KNOMMU) P: Greg Ungerer M: gerg@uclinux.org -- GitLab From 5f49ef8e8cefe0a95948b4270db28507c1c287d4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 21:50:47 +0200 Subject: [PATCH 0657/1519] [PATCH] i2c-viapro: Coding style fixes Before I go on cleaning up and improving the i2c-viapro driver, let's fix all the coding style issues: mostly trailing white space, and spaces used where tabs should be. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/i2c/busses/i2c-viapro | 12 ++--- drivers/i2c/busses/i2c-viapro.c | 76 ++++++++++++++++++------------------ 2 files changed, 43 insertions(+), 45 deletions(-) --- Documentation/i2c/busses/i2c-viapro | 12 ++--- drivers/i2c/busses/i2c-viapro.c | 76 ++++++++++++++--------------- 2 files changed, 43 insertions(+), 45 deletions(-) diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 702f5ac68c09..ef0f1e94e726 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -4,17 +4,17 @@ Supported adapters: * VIA Technologies, Inc. VT82C596A/B Datasheet: Sometimes available at the VIA website - * VIA Technologies, Inc. VT82C686A/B + * VIA Technologies, Inc. VT82C686A/B Datasheet: Sometimes available at the VIA website * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237 Datasheet: available on request from Via Authors: - Frodo Looijaard , - Philip Edelbrock , - Kyösti Mälkki , - Mark D. Studebaker + Frodo Looijaard , + Philip Edelbrock , + Kyösti Mälkki , + Mark D. Studebaker Module Parameters ----------------- @@ -43,5 +43,3 @@ Your lspci -n listing must show one of these : If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. - - diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 99d209e0485a..262755e1ae02 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -1,7 +1,7 @@ /* i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 1998 - 2002 Frodo Looijaard , + Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker @@ -46,9 +46,9 @@ static struct pci_dev *vt596_pdev; -#define SMBBA1 0x90 -#define SMBBA2 0x80 -#define SMBBA3 0xD0 +#define SMBBA1 0x90 +#define SMBBA2 0x80 +#define SMBBA3 0xD0 /* SMBus address offsets */ static unsigned short vt596_smba; @@ -68,26 +68,26 @@ static unsigned short vt596_smba; /* PCI Address Constants */ /* SMBus data in configuration space can be found in two places, - We try to select the better one*/ + We try to select the better one */ static unsigned short smb_cf_hstcfg = 0xD2; -#define SMBHSTCFG (smb_cf_hstcfg) -#define SMBSLVC (smb_cf_hstcfg + 1) -#define SMBSHDW1 (smb_cf_hstcfg + 2) -#define SMBSHDW2 (smb_cf_hstcfg + 3) -#define SMBREV (smb_cf_hstcfg + 4) +#define SMBHSTCFG (smb_cf_hstcfg) +#define SMBSLVC (smb_cf_hstcfg + 1) +#define SMBSHDW1 (smb_cf_hstcfg + 2) +#define SMBSHDW2 (smb_cf_hstcfg + 3) +#define SMBREV (smb_cf_hstcfg + 4) /* Other settings */ #define MAX_TIMEOUT 500 #define ENABLE_INT9 0 /* VT82C596 constants */ -#define VT596_QUICK 0x00 -#define VT596_BYTE 0x04 -#define VT596_BYTE_DATA 0x08 -#define VT596_WORD_DATA 0x0C -#define VT596_BLOCK_DATA 0x14 +#define VT596_QUICK 0x00 +#define VT596_BYTE 0x04 +#define VT596_BYTE_DATA 0x08 +#define VT596_WORD_DATA 0x0C +#define VT596_BLOCK_DATA 0x14 /* If force is set to anything different from 0, we forcibly enable the @@ -115,19 +115,19 @@ static int vt596_transaction(void) int timeout = 0; dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " - "Resetting...\n", temp); - + "Resetting...\n", temp); + outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp); - + return -1; } else { dev_dbg(&vt596_adapter.dev, "Successfull!\n"); @@ -137,7 +137,7 @@ static int vt596_transaction(void) /* start the transaction by setting bit 6 */ outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); - /* We will always wait for a fraction of a second! + /* We will always wait for a fraction of a second! I don't know if VIA needs this, Intel did */ do { msleep(1); @@ -177,16 +177,16 @@ static int vt596_transaction(void) dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); - + return result; } /* Return -1 on error. */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, u8 command, - int size, union i2c_smbus_data *data) + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) { int i, len; @@ -256,7 +256,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, case VT596_BYTE: /* Where is the result put? I assume here it is in * SMBHSTDAT0 but it might just as well be in the - * SMBHSTCMD. No clue in the docs + * SMBHSTCMD. No clue in the docs */ data->byte = inb_p(SMBHSTDAT0); break; @@ -302,7 +302,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, { unsigned char temp; int error = -ENODEV; - + /* Determine the address of the SMBus areas */ if (force_addr) { vt596_smba = force_addr & 0xfff0; @@ -333,10 +333,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev, return -ENODEV; } - found: +found: if (!request_region(vt596_smba, 8, "viapro-smbus")) { dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", - vt596_smba); + vt596_smba); return -ENODEV; } @@ -348,13 +348,13 @@ static int __devinit vt596_probe(struct pci_dev *pdev, pci_write_config_word(pdev, id->driver_data, vt596_smba); pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_warn(&pdev->dev, "WARNING: SMBus interface set to new " - "address 0x%04x!\n", vt596_smba); + "address 0x%04x!\n", vt596_smba); } else if ((temp & 1) == 0) { if (force) { - /* NOTE: This assumes I/O space and other allocations - * WERE done by the Bios! Don't complain if your - * hardware does weird things after enabling this. - * :') Check for Bios updates before resorting to + /* NOTE: This assumes I/O space and other allocations + * WERE done by the Bios! Don't complain if your + * hardware does weird things after enabling this. + * :') Check for Bios updates before resorting to * this. */ pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); @@ -381,8 +381,8 @@ static int __devinit vt596_probe(struct pci_dev *pdev, vt596_adapter.dev.parent = &pdev->dev; snprintf(vt596_adapter.name, I2C_NAME_SIZE, - "SMBus Via Pro adapter at %04x", vt596_smba); - + "SMBus Via Pro adapter at %04x", vt596_smba); + vt596_pdev = pci_dev_get(pdev); if (i2c_add_adapter(&vt596_adapter)) { pci_dev_put(vt596_pdev); @@ -395,7 +395,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, */ return -ENODEV; - release_region: +release_region: release_region(vt596_smba, 8); return error; } @@ -420,7 +420,7 @@ static struct pci_device_id vt596_ids[] = { { 0, } }; -MODULE_DEVICE_TABLE (pci, vt596_ids); +MODULE_DEVICE_TABLE(pci, vt596_ids); static struct pci_driver vt596_driver = { .name = "vt596_smbus", -- GitLab From f118301416953d677de738100c33eb8cfb7adecb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 21:58:41 +0200 Subject: [PATCH 0658/1519] [PATCH] i2c-viapro: Implement I2C Block transactions Implement the I2C block transactions on VIA chips which support them: VT82C686B, VT8233, VT8233A, VT8235 and VT8237R. This speeds up EEPROM accesses by a factor 10 or so. I would like to thank Antonino A. Daplas, Hinko Kocevar, Salah Coronya and Andreas Henriksson for their help in testing this new feature. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/i2c/busses/i2c-viapro | 7 +++++- drivers/i2c/busses/i2c-viapro.c | 39 +++++++++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 4 deletions(-) --- Documentation/i2c/busses/i2c-viapro | 7 +++++- drivers/i2c/busses/i2c-viapro.c | 39 ++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 4 deletions(-) diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index ef0f1e94e726..387cbd4015fc 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -14,7 +14,8 @@ Authors: Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , - Mark D. Studebaker + Mark D. Studebaker , + Jean Delvare Module Parameters ----------------- @@ -43,3 +44,7 @@ Your lspci -n listing must show one of these : If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. + +Except for the oldest chips (VT82C596A/B, VT82C686A and most probably +VT8231), this driver supports I2C block transactions. Such transactions +are mainly useful to read from and write to EEPROMs. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 262755e1ae02..b420e752b1dc 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -4,6 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker + Copyright (C) 2005 Jean Delvare This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -88,6 +89,7 @@ static unsigned short smb_cf_hstcfg = 0xD2; #define VT596_BYTE_DATA 0x08 #define VT596_WORD_DATA 0x0C #define VT596_BLOCK_DATA 0x14 +#define VT596_I2C_BLOCK_DATA 0x34 /* If force is set to anything different from 0, we forcibly enable the @@ -107,6 +109,9 @@ MODULE_PARM_DESC(force_addr, static struct i2c_adapter vt596_adapter; +#define FEATURE_I2CBLOCK (1<<0) +static unsigned int vt596_features; + /* Another internally used function */ static int vt596_transaction(void) { @@ -225,6 +230,12 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, } size = VT596_WORD_DATA; break; + case I2C_SMBUS_I2C_BLOCK_DATA: + if (!(vt596_features & FEATURE_I2CBLOCK)) + return -1; + if (read_write == I2C_SMBUS_READ) + outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0); + /* Fall through */ case I2C_SMBUS_BLOCK_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); @@ -240,11 +251,12 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } - size = VT596_BLOCK_DATA; + size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ? + VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA; break; } - outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + outb_p((size & 0x3C) + (ENABLE_INT9 & 1), SMBHSTCNT); if (vt596_transaction()) /* Error in transaction */ return -1; @@ -266,6 +278,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, case VT596_WORD_DATA: data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); break; + case VT596_I2C_BLOCK_DATA: case VT596_BLOCK_DATA: data->block[0] = inb_p(SMBHSTDAT0); if (data->block[0] > I2C_SMBUS_BLOCK_MAX) @@ -280,9 +293,13 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, static u32 vt596_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; + + if (vt596_features & FEATURE_I2CBLOCK) + func |= I2C_FUNC_SMBUS_I2C_BLOCK; + return func; } static struct i2c_algorithm smbus_algorithm = { @@ -379,6 +396,22 @@ static int __devinit vt596_probe(struct pci_dev *pdev, dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_8237: + case PCI_DEVICE_ID_VIA_8235: + case PCI_DEVICE_ID_VIA_8233A: + case PCI_DEVICE_ID_VIA_8233_0: + vt596_features |= FEATURE_I2CBLOCK; + break; + case PCI_DEVICE_ID_VIA_82C686_4: + /* The VT82C686B (rev 0x40) does support I2C block + transactions, but the VT82C686A (rev 0x30) doesn't */ + if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp) + && temp >= 0x40) + vt596_features |= FEATURE_I2CBLOCK; + break; + } + vt596_adapter.dev.parent = &pdev->dev; snprintf(vt596_adapter.name, I2C_NAME_SIZE, "SMBus Via Pro adapter at %04x", vt596_smba); -- GitLab From c2f559d5df5751780c0bd3ea0bd0aa17d47c0b39 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 22:01:07 +0200 Subject: [PATCH 0659/1519] [PATCH] i2c-viapro: Code cleanups Cleanups to the i2c-viapro driver: * Kill unused defines. * Kill interrupt-related code, as the driver doesn't use interrupts. * Fix broken comments (some copied from i2c-piix4.) * Centralize the unsupported command error case in vt596_access. That way we'll catch all unsupported commands, not only I2C_SMBUS_PROC_CALL. * Refactor some code. * Convert some dev_dbg into dev_err. Errors better be reported even in non-debug mode. * Do not verify that the final reset succeeded. It'll be checked at the beginning of the next transaction anyway. * Use the driver name to reserve the I/O region. * Do not print the contents of the SMBREV register, it reads 0 on all chips I've seen so far. * Some other minor fixes all over the place. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-viapro.c | 122 +++++++++++++--------------------------- 1 file changed, 41 insertions(+), 81 deletions(-) --- drivers/i2c/busses/i2c-viapro.c | 122 +++++++++++--------------------- 1 file changed, 41 insertions(+), 81 deletions(-) diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index b420e752b1dc..5cf8fe182806 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include @@ -54,34 +53,22 @@ static struct pci_dev *vt596_pdev; /* SMBus address offsets */ static unsigned short vt596_smba; #define SMBHSTSTS (vt596_smba + 0) -#define SMBHSLVSTS (vt596_smba + 1) #define SMBHSTCNT (vt596_smba + 2) #define SMBHSTCMD (vt596_smba + 3) #define SMBHSTADD (vt596_smba + 4) #define SMBHSTDAT0 (vt596_smba + 5) #define SMBHSTDAT1 (vt596_smba + 6) #define SMBBLKDAT (vt596_smba + 7) -#define SMBSLVCNT (vt596_smba + 8) -#define SMBSHDWCMD (vt596_smba + 9) -#define SMBSLVEVT (vt596_smba + 0xA) -#define SMBSLVDAT (vt596_smba + 0xC) /* PCI Address Constants */ /* SMBus data in configuration space can be found in two places, We try to select the better one */ -static unsigned short smb_cf_hstcfg = 0xD2; - -#define SMBHSTCFG (smb_cf_hstcfg) -#define SMBSLVC (smb_cf_hstcfg + 1) -#define SMBSHDW1 (smb_cf_hstcfg + 2) -#define SMBSHDW2 (smb_cf_hstcfg + 3) -#define SMBREV (smb_cf_hstcfg + 4) +static unsigned short SMBHSTCFG = 0xD2; /* Other settings */ #define MAX_TIMEOUT 500 -#define ENABLE_INT9 0 /* VT82C596 constants */ #define VT596_QUICK 0x00 @@ -107,12 +94,13 @@ MODULE_PARM_DESC(force_addr, "EXTREMELY DANGEROUS!"); +static struct pci_driver vt596_driver; static struct i2c_adapter vt596_adapter; #define FEATURE_I2CBLOCK (1<<0) static unsigned int vt596_features; -/* Another internally used function */ +/* Return -1 on error, 0 on success */ static int vt596_transaction(void) { int temp; @@ -127,23 +115,21 @@ static int vt596_transaction(void) /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " - "Resetting...\n", temp); + "Resetting... ", temp); outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp); - + printk("Failed! (0x%02x)\n", temp); return -1; } else { - dev_dbg(&vt596_adapter.dev, "Successfull!\n"); + printk("Successful!\n"); } } - /* start the transaction by setting bit 6 */ - outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + /* Start the transaction by setting bit 6 */ + outb_p(inb(SMBHSTCNT) | 0x40, SMBHSTCNT); - /* We will always wait for a fraction of a second! - I don't know if VIA needs this, Intel did */ + /* We will always wait for a fraction of a second */ do { msleep(1); temp = inb_p(SMBHSTSTS); @@ -152,33 +138,32 @@ static int vt596_transaction(void) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { result = -1; - dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n"); + dev_err(&vt596_adapter.dev, "SMBus timeout!\n"); } if (temp & 0x10) { result = -1; - dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n"); + dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n", + inb_p(SMBHSTCNT) & 0x3C); } if (temp & 0x08) { result = -1; - dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be " - "locked until next hard\nreset. (sorry!)\n"); - /* Clock stops and slave is stuck in mid-transmission */ + dev_err(&vt596_adapter.dev, "SMBus collision!\n"); } if (temp & 0x04) { result = -1; - dev_dbg(&vt596_adapter.dev, "Error: no response!\n"); + /* Quick commands are used to probe for chips, so + errors are expected, and we don't want to frighten the + user. */ + if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK) + dev_err(&vt596_adapter.dev, "Transaction error!\n"); } - if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + /* Resetting status register */ + if (temp & 0x1F) outb_p(temp, SMBHSTSTS); - if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { - dev_warn(&vt596_adapter.dev, "Failed reset at end " - "of transaction (%02x)\n", temp); - } - } dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), @@ -188,41 +173,29 @@ static int vt596_transaction(void) return result; } -/* Return -1 on error. */ +/* Return -1 on error, 0 on success */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { - int i, len; + int i; switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_info(&vt596_adapter.dev, - "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; case I2C_SMBUS_QUICK: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); size = VT596_QUICK; break; case I2C_SMBUS_BYTE: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); if (read_write == I2C_SMBUS_WRITE) outb_p(command, SMBHSTCMD); size = VT596_BYTE; break; case I2C_SMBUS_BYTE_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) outb_p(data->byte, SMBHSTDAT0); size = VT596_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { outb_p(data->word & 0xff, SMBHSTDAT0); @@ -232,31 +205,30 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, break; case I2C_SMBUS_I2C_BLOCK_DATA: if (!(vt596_features & FEATURE_I2CBLOCK)) - return -1; + goto exit_unsupported; if (read_write == I2C_SMBUS_READ) outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0); /* Fall through */ case I2C_SMBUS_BLOCK_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), - SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { - len = data->block[0]; - if (len < 0) - len = 0; + u8 len = data->block[0]; if (len > I2C_SMBUS_BLOCK_MAX) len = I2C_SMBUS_BLOCK_MAX; outb_p(len, SMBHSTDAT0); - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ? VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA; break; + default: + goto exit_unsupported; } - outb_p((size & 0x3C) + (ENABLE_INT9 & 1), SMBHSTCNT); + outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD); + outb_p((size & 0x3C), SMBHSTCNT); if (vt596_transaction()) /* Error in transaction */ return -1; @@ -266,12 +238,6 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, switch (size) { case VT596_BYTE: - /* Where is the result put? I assume here it is in - * SMBHSTDAT0 but it might just as well be in the - * SMBHSTCMD. No clue in the docs - */ - data->byte = inb_p(SMBHSTDAT0); - break; case VT596_BYTE_DATA: data->byte = inb_p(SMBHSTDAT0); break; @@ -283,12 +249,17 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, data->block[0] = inb_p(SMBHSTDAT0); if (data->block[0] > I2C_SMBUS_BLOCK_MAX) data->block[0] = I2C_SMBUS_BLOCK_MAX; - i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMBBLKDAT); break; } return 0; + +exit_unsupported: + dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n", + size); + return -1; } static u32 vt596_func(struct i2c_adapter *adapter) @@ -311,7 +282,6 @@ static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, - .name = "unset", }; static int __devinit vt596_probe(struct pci_dev *pdev, @@ -328,12 +298,12 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) || - !(vt596_smba & 0x1)) { + !(vt596_smba & 0x0001)) { /* try 2nd address and config reg. for 596 */ if (id->device == PCI_DEVICE_ID_VIA_82C596_3 && !pci_read_config_word(pdev, SMBBA2, &vt596_smba) && - (vt596_smba & 0x1)) { - smb_cf_hstcfg = 0x84; + (vt596_smba & 0x0001)) { + SMBHSTCFG = 0x84; } else { /* no matches at all */ dev_err(&pdev->dev, "Cannot configure " @@ -351,7 +321,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } found: - if (!request_region(vt596_smba, 8, "viapro-smbus")) { + if (!request_region(vt596_smba, 8, vt596_driver.name)) { dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", vt596_smba); return -ENODEV; @@ -366,7 +336,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_warn(&pdev->dev, "WARNING: SMBus interface set to new " "address 0x%04x!\n", vt596_smba); - } else if ((temp & 1) == 0) { + } else if (!(temp & 0x01)) { if (force) { /* NOTE: This assumes I/O space and other allocations * WERE done by the Bios! Don't complain if your @@ -374,7 +344,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev, * :') Check for Bios updates before resorting to * this. */ - pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); + pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_info(&pdev->dev, "Enabling SMBus device\n"); } else { dev_err(&pdev->dev, "SMBUS: Error: Host SMBus " @@ -384,16 +354,6 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } } - if ((temp & 0x0E) == 8) - dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n"); - else if ((temp & 0x0E) == 0) - dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n"); - else - dev_dbg(&pdev->dev, "Illegal Interrupt configuration " - "(or code out of date)!\n"); - - pci_read_config_byte(pdev, SMBREV, &temp); - dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); switch (pdev->device) { -- GitLab From aaf7f1477668f34dda65aba17e87c0bc2ebe84d1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 22:09:07 +0200 Subject: [PATCH 0660/1519] [PATCH] i2c-viapro: Update supported devices list Make it clearer which chips are supported by the i2c-viapro driver, and which support I2C block transactions. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Documentation/i2c/busses/i2c-viapro | 12 ++++++------ drivers/i2c/busses/i2c-viapro.c | 22 +++++++++++++--------- 2 files changed, 19 insertions(+), 15 deletions(-) --- Documentation/i2c/busses/i2c-viapro | 12 ++++++------ drivers/i2c/busses/i2c-viapro.c | 22 +++++++++++++--------- 2 files changed, 19 insertions(+), 15 deletions(-) diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 387cbd4015fc..9363b8bd6109 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -29,18 +29,18 @@ Description ----------- i2c-viapro is a true SMBus host driver for motherboards with one of the -supported VIA southbridges. +supported VIA south bridges. Your lspci -n listing must show one of these : - device 1106:3050 (VT82C596 function 3) - device 1106:3051 (VT82C596 function 3) + device 1106:3050 (VT82C596A function 3) + device 1106:3051 (VT82C596B function 3) device 1106:3057 (VT82C686 function 4) device 1106:3074 (VT8233) device 1106:3147 (VT8233A) - device 1106:8235 (VT8231) - devide 1106:3177 (VT8235) - devide 1106:3227 (VT8237) + device 1106:8235 (VT8231 function 4) + device 1106:3177 (VT8235) + device 1106:3227 (VT8237R) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 5cf8fe182806..3be476cd4bc5 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -22,15 +22,19 @@ */ /* - Supports Via devices: - 82C596A/B (0x3050) - 82C596B (0x3051) - 82C686A/B - 8231 - 8233 - 8233A (0x3147 and 0x3177) - 8235 - 8237 + Supports the following VIA south bridges: + + Chip name PCI ID REV I2C block + VT82C596A 0x3050 no + VT82C596B 0x3051 no + VT82C686A 0x3057 0x30 no + VT82C686B 0x3057 0x40 yes + VT8231 0x8235 no? + VT8233 0x3074 yes + VT8233A 0x3147 yes? + VT8235 0x3177 yes + VT8237R 0x3227 yes + Note: we assume there can only be one device, with one SMBus interface. */ -- GitLab From 50c1cc339ca72f7cb95d440d384346f4238dc494 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 22:15:53 +0200 Subject: [PATCH 0661/1519] [PATCH] i2c-viapro: Refactor control outb By slightly shifting the interface between vt596_access and vt596_transaction, we can save two I/O accesses per SMBus transaction. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-viapro.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) --- drivers/i2c/busses/i2c-viapro.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 3be476cd4bc5..a89a21264d37 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -105,7 +105,7 @@ static struct i2c_adapter vt596_adapter; static unsigned int vt596_features; /* Return -1 on error, 0 on success */ -static int vt596_transaction(void) +static int vt596_transaction(u8 size) { int temp; int result = 0; @@ -131,7 +131,7 @@ static int vt596_transaction(void) } /* Start the transaction by setting bit 6 */ - outb_p(inb(SMBHSTCNT) | 0x40, SMBHSTCNT); + outb_p(0x40 | (size & 0x3C), SMBHSTCNT); /* We will always wait for a fraction of a second */ do { @@ -232,9 +232,8 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, } outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD); - outb_p((size & 0x3C), SMBHSTCNT); - if (vt596_transaction()) /* Error in transaction */ + if (vt596_transaction(size)) /* Error in transaction */ return -1; if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) -- GitLab From ed5453e54f0c4a29605fd8399f58649d8739f5f0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 22 Sep 2005 22:23:32 +0200 Subject: [PATCH 0662/1519] [PATCH] i2c-viapro: Improve register dump Improve the register dump used to debug the i2c-viapro driver. The original dump was missing the HSTSTS register and the block data buffer. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-viapro.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) --- drivers/i2c/busses/i2c-viapro.c | 38 ++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index a89a21264d37..c1c9eb1d714f 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -104,6 +104,30 @@ static struct i2c_adapter vt596_adapter; #define FEATURE_I2CBLOCK (1<<0) static unsigned int vt596_features; +#ifdef DEBUG +static void vt596_dump_regs(const char *msg, u8 size) +{ + dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x " + "DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + if (size == VT596_BLOCK_DATA + || size == VT596_I2C_BLOCK_DATA) { + int i; + + dev_dbg(&vt596_adapter.dev, "BLK="); + for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++) + printk("%02x,", inb_p(SMBBLKDAT)); + printk("\n"); + dev_dbg(&vt596_adapter.dev, " "); + for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++) + printk("%02x,", inb_p(SMBBLKDAT)); + printk("%02x\n", inb_p(SMBBLKDAT)); + } +} +#endif + /* Return -1 on error, 0 on success */ static int vt596_transaction(u8 size) { @@ -111,10 +135,9 @@ static int vt596_transaction(u8 size) int result = 0; int timeout = 0; - dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); +#ifdef DEBUG + vt596_dump_regs("Transaction (pre)", size); +#endif /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { @@ -169,10 +192,9 @@ static int vt596_transaction(u8 size) if (temp & 0x1F) outb_p(temp, SMBHSTSTS); - dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); +#ifdef DEBUG + vt596_dump_regs("Transaction (post)", size); +#endif return result; } -- GitLab From ca68f1193e8fc86470d4222d563d13b5584dc4f8 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 22 Sep 2005 22:23:32 +0200 Subject: [PATCH 0663/1519] [PATCH] i2c-viapro: Cleanup ifdef usage It's not nice to put #ifdef in the middle of functions. CC: Jean Delvare Signed-off-by: Greg Kroah-Hartman drivers/i2c/busses/i2c-viapro.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) --- drivers/i2c/busses/i2c-viapro.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index c1c9eb1d714f..566342d50c5f 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -126,6 +126,8 @@ static void vt596_dump_regs(const char *msg, u8 size) printk("%02x\n", inb_p(SMBBLKDAT)); } } +#else +static inline void vt596_dump_regs(const char *msg, u8 size) { } #endif /* Return -1 on error, 0 on success */ @@ -135,9 +137,7 @@ static int vt596_transaction(u8 size) int result = 0; int timeout = 0; -#ifdef DEBUG vt596_dump_regs("Transaction (pre)", size); -#endif /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { @@ -192,9 +192,7 @@ static int vt596_transaction(u8 size) if (temp & 0x1F) outb_p(temp, SMBHSTSTS); -#ifdef DEBUG vt596_dump_regs("Transaction (post)", size); -#endif return result; } -- GitLab From 8a1b028bca95b5af36e94a660c4d284fe3313f74 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 7 Oct 2005 23:04:48 +0200 Subject: [PATCH 0664/1519] [PATCH] i2c: Add missing i2c-ixp2000/4xx adapter name The ixp4xx and ixp2000 i2c bus drivers omit to fill the required i2c_adapter name field. Copy the device driver name field there. Signed-off-by: Jean Delvare Signed-off-by: Deepak Saxena Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-ixp2000.c | 4 ++++ drivers/i2c/busses/i2c-ixp4xx.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 1956af382cd8..9dee505ceed2 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -36,6 +36,8 @@ #include /* Pick up IXP2000-specific bits */ #include +static struct device_driver ixp2000_i2c_driver; + static inline int ixp2000_scl_pin(void *data) { return ((struct ixp2000_i2c_pins*)data)->scl_pin; @@ -121,6 +123,8 @@ static int ixp2000_i2c_probe(struct device *dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP2000, + strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name, + I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data, drv_data->adapter.dev.parent = &plat_dev->dev; diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index f6f5ca31fdba..013981df38af 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -35,6 +35,8 @@ #include /* Pick up IXP4xx-specific bits */ +static struct device_driver ixp4xx_i2c_driver; + static inline int ixp4xx_scl_pin(void *data) { return ((struct ixp4xx_i2c_pins*)data)->scl_pin; @@ -129,6 +131,8 @@ static int ixp4xx_i2c_probe(struct device *dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP4XX; + strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name, + I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data; drv_data->adapter.dev.parent = &plat_dev->dev; -- GitLab From e8aafcb2bba1fe122907161701a167e38174c7a5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 7 Oct 2005 23:06:27 +0200 Subject: [PATCH 0665/1519] [PATCH] i2c: Cleanup i2c-dev ioctl debug message Cleanup the ioctl debug message in i2c-dev. In particular, the minor number is redundant now that the minor number and the adapter number are kept in sync. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index aa7a4fadef64..89f54a5e8484 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -177,8 +177,8 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, int i,datasize,res; unsigned long funcs; - dev_dbg(&client->adapter->dev, "i2c-%d ioctl, cmd: 0x%x, arg: %lx.\n", - iminor(inode),cmd, arg); + dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n", + cmd, arg); switch ( cmd ) { case I2C_SLAVE: -- GitLab From bf813b314a2271c3f3903eb3279ebf5e09b3d27a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 7 Oct 2005 23:09:04 +0200 Subject: [PATCH 0666/1519] [PATCH] i2c: Drop useless CVS revision IDs CVS revision IDs are totally useless and irrelevant by now. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- include/linux/i2c-algo-bit.h | 2 -- include/linux/i2c-algo-pcf.h | 2 -- include/linux/i2c-dev.h | 2 -- include/linux/i2c.h | 2 -- 4 files changed, 8 deletions(-) diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index 110904481238..fb592147caec 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -21,8 +21,6 @@ /* With some changes from Kyösti Mälkki and even Frodo Looijaard */ -/* $Id: i2c-algo-bit.h,v 1.10 2003/01/21 08:08:16 kmalkki Exp $ */ - #ifndef _LINUX_I2C_ALGO_BIT_H #define _LINUX_I2C_ALGO_BIT_H diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 2a508562255f..a0e534b334a9 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -22,8 +22,6 @@ /* With some changes from Kyösti Mälkki and even Frodo Looijaard */ -/* $Id: i2c-algo-pcf.h,v 1.8 2003/01/21 08:08:16 kmalkki Exp $ */ - #ifndef _LINUX_I2C_ALGO_PCF_H #define _LINUX_I2C_ALGO_PCF_H diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index 541695679762..81c229a0fbca 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -19,8 +19,6 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* $Id: i2c-dev.h,v 1.13 2003/01/21 08:08:16 kmalkki Exp $ */ - #ifndef _LINUX_I2C_DEV_H #define _LINUX_I2C_DEV_H diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 17d63c1efdce..ec8188414506 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -23,8 +23,6 @@ /* With some changes from Kyösti Mälkki and Frodo Looijaard */ -/* $Id: i2c.h,v 1.68 2003/01/21 08:08:16 kmalkki Exp $ */ - #ifndef _LINUX_I2C_H #define _LINUX_I2C_H -- GitLab From ada0c2f8fa087dc1dbc34e096c318739b1d6381a Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Fri, 7 Oct 2005 23:11:03 +0200 Subject: [PATCH 0667/1519] [PATCH] hwmon: Fix w83627ehf/hf vs PNPACPI conflict (bug #4014) This patch changes w83627hf and w83627ehf drivers to reserve only ports 0x295-0x296, instead of full 0x290-0x297 range. While some other sensors chips respond to all addresses in 0x290-0x297 range, Winbond chips respond to 0x295-0x296 only (this behavior is implied by documentation, and matches behavior observed on real systems). This is not problem alone, as no BIOS was found to put something at these unused addresses, and sensors chip itself provides nothing there as well. But in addition to only respond to these two addresses, also BIOS vendors report in their ACPI-PnP structures that there is some resource at I/O address 0x295 of length 2. And when later this hwmon driver attempts to request region with base 0x290/length 8, it fails as one request_region cannot span more than one device. Due to this we have to ask only for region this hardware really occupies, otherwise driver cannot be loaded on systems with ACPI-PnP enabled. Signed-off-by: Petr Vandrovec Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83627ehf.c | 13 ++++++++----- drivers/hwmon/w83627hf.c | 21 +++++++++++++-------- 2 files changed, 21 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index b60efe8f8b26..685eeb766809 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -105,7 +105,9 @@ superio_exit(void) * ISA constants */ -#define REGION_LENGTH 8 +#define REGION_ALIGNMENT ~7 +#define REGION_OFFSET 5 +#define REGION_LENGTH 2 #define ADDR_REG_OFFSET 5 #define DATA_REG_OFFSET 6 @@ -673,7 +675,8 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) struct w83627ehf_data *data; int i, err = 0; - if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) { + if (!request_region(address + REGION_OFFSET, REGION_LENGTH, + w83627ehf_driver.name)) { err = -EBUSY; goto exit; } @@ -762,7 +765,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) exit_free: kfree(data); exit_release: - release_region(address, REGION_LENGTH); + release_region(address + REGION_OFFSET, REGION_LENGTH); exit: return err; } @@ -776,7 +779,7 @@ static int w83627ehf_detach_client(struct i2c_client *client) if ((err = i2c_detach_client(client))) return err; - release_region(client->addr, REGION_LENGTH); + release_region(client->addr + REGION_OFFSET, REGION_LENGTH); kfree(data); return 0; @@ -807,7 +810,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr) superio_select(W83627EHF_LD_HWM); val = (superio_inb(SIO_REG_ADDR) << 8) | superio_inb(SIO_REG_ADDR + 1); - *addr = val & ~(REGION_LENGTH - 1); + *addr = val & REGION_ALIGNMENT; if (*addr == 0) { superio_exit(); return -ENODEV; diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 7f6f7280878d..494274d27f01 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -142,10 +142,14 @@ superio_exit(void) #define WINB_BASE_REG 0x60 /* Constants specified below */ -/* Length of ISA address segment */ -#define WINB_EXTENT 8 +/* Alignment of the base address */ +#define WINB_ALIGNMENT ~7 -/* Where are the ISA address/data registers relative to the base address */ +/* Offset & size of I/O region we are interested in */ +#define WINB_REGION_OFFSET 5 +#define WINB_REGION_SIZE 2 + +/* Where are the sensors address/data registers relative to the base address */ #define W83781D_ADDR_REG_OFFSET 5 #define W83781D_DATA_REG_OFFSET 6 @@ -981,7 +985,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr) superio_select(W83627HF_LD_HWM); val = (superio_inb(WINB_BASE_REG) << 8) | superio_inb(WINB_BASE_REG + 1); - *addr = val & ~(WINB_EXTENT - 1); + *addr = val & WINB_ALIGNMENT; if (*addr == 0 && force_addr == 0) { superio_exit(); return -ENODEV; @@ -1000,9 +1004,10 @@ static int w83627hf_detect(struct i2c_adapter *adapter) const char *client_name = ""; if(force_addr) - address = force_addr & ~(WINB_EXTENT - 1); + address = force_addr & WINB_ALIGNMENT; - if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) { + if (!request_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE, + w83627hf_driver.name)) { err = -EBUSY; goto ERROR0; } @@ -1148,7 +1153,7 @@ static int w83627hf_detect(struct i2c_adapter *adapter) ERROR2: kfree(data); ERROR1: - release_region(address, WINB_EXTENT); + release_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE); ERROR0: return err; } @@ -1163,7 +1168,7 @@ static int w83627hf_detach_client(struct i2c_client *client) if ((err = i2c_detach_client(client))) return err; - release_region(client->addr, WINB_EXTENT); + release_region(client->addr + WINB_REGION_OFFSET, WINB_REGION_SIZE); kfree(data); return 0; -- GitLab From 47b8b103f7f50d56568eb8d6cff0e3a2373f0eb3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 7 Oct 2005 23:56:46 +0200 Subject: [PATCH 0668/1519] [PATCH] i2c: Cleanup i2c-i801 ifdefs No more need to check for PEC support being available now that both the i2c-core and the i2c-i801 drivers are part of the Linux kernel source tree. It's just there. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-i801.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 588583530c9f..413930cafc49 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -52,10 +52,6 @@ #include #include -#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC -#define HAVE_PEC -#endif - /* I801 SMBus address offsets */ #define SMBHSTSTS (0 + i801_smba) #define SMBHSTCNT (2 + i801_smba) @@ -392,7 +388,6 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, goto END; } -#ifdef HAVE_PEC if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) { /* wait for INTR bit as advised by Intel */ timeout = 0; @@ -407,7 +402,6 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, } outb_p(temp, SMBHSTSTS); } -#endif result = 0; END: if (command == I2C_SMBUS_I2C_BLOCK_DATA) { @@ -426,10 +420,8 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, int block = 0; int ret, xact = 0; -#ifdef HAVE_PEC if(isich4) hwpec = (flags & I2C_CLIENT_PEC) != 0; -#endif switch (size) { case I2C_SMBUS_QUICK: @@ -464,11 +456,9 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: -#ifdef HAVE_PEC case I2C_SMBUS_BLOCK_DATA_PEC: if(hwpec && size == I2C_SMBUS_BLOCK_DATA) size = I2C_SMBUS_BLOCK_DATA_PEC; -#endif outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); @@ -480,13 +470,11 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, return -1; } -#ifdef HAVE_PEC if(isich4 && hwpec) { if(size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA) outb_p(1, SMBAUXCTL); /* enable HW PEC */ } -#endif if(block) ret = i801_block_transaction(data, read_write, size); else { @@ -494,13 +482,11 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, ret = i801_transaction(); } -#ifdef HAVE_PEC if(isich4 && hwpec) { if(size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA) outb_p(0, SMBAUXCTL); } -#endif if(block) return ret; @@ -527,12 +513,8 @@ static u32 i801_func(struct i2c_adapter *adapter) return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK -#ifdef HAVE_PEC | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC | - I2C_FUNC_SMBUS_HWPEC_CALC - : 0) -#endif - ; + I2C_FUNC_SMBUS_HWPEC_CALC : 0); } static struct i2c_algorithm smbus_algorithm = { -- GitLab From 7865e24935ec7e76fb482c749015a23052e51f76 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:00:31 +0200 Subject: [PATCH 0669/1519] [PATCH] i2c: Documentation fixes i2c documentation fixes. >From Hideki Iwamoto: * i2c_smbus_read_i2c_block_data is not deleted in 2.6.10. It still exists. * The name which can be set to i2c_driver is up to 31 characters. >From Jean Delvare: * Reword the paragraph about i2c_driver.name, to reflect the "new" naming policy. * Delete the out-of-date note about now gone inc_use and dec_use fields. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/writing-clients | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 077275722a7c..1882811c7f5d 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -33,8 +33,8 @@ static struct i2c_driver foo_driver = { .command = &foo_command /* may be NULL */ } -The name can be chosen freely, and may be upto 40 characters long. Please -use something descriptive here. +The name field must match the driver name, including the case. It must not +contain spaces, and may be up to 31 characters long. Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This means that your driver will be notified when new adapters are found. @@ -43,9 +43,6 @@ This is almost always what you want. All other fields are for call-back functions which will be explained below. -There use to be two additional fields in this structure, inc_use et dec_use, -for module usage count, but these fields were obsoleted and removed. - Extra client data ================= @@ -576,12 +573,12 @@ SMBus communication extern s32 i2c_smbus_write_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); + extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, + u8 command, u8 *values); These ones were removed in Linux 2.6.10 because they had no users, but could be added back later if needed: - extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, - u8 command, u8 *values); extern s32 i2c_smbus_read_block_data(struct i2c_client * client, u8 command, u8 *values); extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, -- GitLab From 31ec5bc57146a479fac6f6878146059180413e43 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:04:13 +0200 Subject: [PATCH 0670/1519] [PATCH] i2c: Fix misplaced i2c.h comment Fix a misplaced comment in i2c.h. Spotted by Hideki Iwamoto. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- include/linux/i2c.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index ec8188414506..6a1f3424f10f 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -92,10 +92,10 @@ extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); extern s32 i2c_smbus_write_word_data(struct i2c_client * client, u8 command, u16 value); -/* Returns the number of bytes transferred */ extern s32 i2c_smbus_write_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); +/* Returns the number of read bytes */ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, u8 command, u8 *values); -- GitLab From 80ce3b7d0f52877b80cddc3ace8b332d888f0131 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:06:09 +0200 Subject: [PATCH 0671/1519] [PATCH] i2c: Drop out-of-date, colliding ioctl definitions Delete 2 out-of-date, colliding ioctl defines. I2C_UDELAY and I2C_MDELAY are supposed to be used by i2c-algo-bit, but actually aren't (and I suspect never were). Moreover, their values are the same as I2C_FUNCS and I2C_SLAVE_FORCE, respectively, which *are* widely used. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- include/linux/i2c.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 6a1f3424f10f..74103d0a8cd2 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -503,11 +503,6 @@ union i2c_smbus_data { #define I2C_SMBUS 0x0720 /* SMBus-level access */ -/* ... algo-bit.c recognizes */ -#define I2C_UDELAY 0x0705 /* set delay in microsecs between each */ - /* written byte (except address) */ -#define I2C_MDELAY 0x0706 /* millisec delay between written bytes */ - /* ----- I2C-DEV: char device interface stuff ------------------------- */ #define I2C_MAJOR 89 /* Device major number */ -- GitLab From 91749996287c230671788014f422f72e594e7b86 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:10:00 +0200 Subject: [PATCH 0672/1519] [PATCH] hwmon: Drop legacy ISA address support from it87 Drop legacy ISA address support from the it87 driver. All supported chips are Super-I/O chips, so the device ISA address can be safely read from Super-I/O space rather than blindly assumed. Two nearby inaccurate documentation statements have been fixed as well: * The IT8705F doesn't have an SMBus interface. * The SiS950 doesn't have a distinct prefix. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/it87 | 8 +++---- drivers/hwmon/it87.c | 51 +++++++++------------------------------- 2 files changed, 15 insertions(+), 44 deletions(-) diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 0d0195040d88..7f42e441c645 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -4,18 +4,18 @@ Kernel driver it87 Supported chips: * IT8705F Prefix: 'it87' - Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports) + Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website http://www.ite.com.tw/ * IT8712F Prefix: 'it8712' Addresses scanned: I2C 0x28 - 0x2f - from Super I/O config space, or default ISA 0x290 (8 I/O ports) + from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website http://www.ite.com.tw/ * SiS950 [clone of IT8705F] - Prefix: 'sis950' - Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports) + Prefix: 'it87' + Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: No longer be available Author: Christophe Gauthron diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 53cc2b6d6385..55e1c835a046 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -2,7 +2,7 @@ it87.c - Part of lm_sensors, Linux kernel modules for hardware monitoring. - Supports: IT8705F Super I/O chip w/LPC interface & SMBus + Supports: IT8705F Super I/O chip w/LPC interface IT8712F Super I/O chip w/LPC interface & SMBus Sis950 A clone of the IT8705F @@ -47,7 +47,7 @@ /* Addresses to scan */ static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned short isa_address = 0x290; +static unsigned short isa_address; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(it87, it8712); @@ -706,7 +706,7 @@ static int it87_isa_attach_adapter(struct i2c_adapter *adapter) } /* SuperIO detection - will change isa_address if a chip is found */ -static int __init it87_find(int *address) +static int __init it87_find(unsigned short *address) { int err = -ENODEV; @@ -757,34 +757,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) if (!request_region(address, IT87_EXTENT, it87_isa_driver.name)) goto ERROR0; - /* Probe whether there is anything available on this address. Already - done for SMBus and Super-I/O clients */ - if (kind < 0) { - if (is_isa && !chip_type) { -#define REALLY_SLOW_IO - /* We need the timeouts for at least some IT87-like chips. But only - if we read 'undefined' registers. */ - i = inb_p(address + 1); - if (inb_p(address + 2) != i - || inb_p(address + 3) != i - || inb_p(address + 7) != i) { - err = -ENODEV; - goto ERROR1; - } -#undef REALLY_SLOW_IO - - /* Let's just hope nothing breaks here */ - i = inb_p(address + 5) & 0x7f; - outb_p(~i & 0x7f, address + 5); - if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { - outb_p(i, address + 5); - err = -ENODEV; - goto ERROR1; - } - } - } - - /* OK. For now, we presume we have a valid client. We now create the + /* For now, we presume we have a valid client. We create the client structure, even though we cannot fill it completely yet. But it allows us to access it87_{read,write}_value. */ @@ -1182,20 +1155,18 @@ static struct it87_data *it87_update_device(struct device *dev) static int __init sm_it87_init(void) { - int addr, res; - - if (!it87_find(&addr)) { - isa_address = addr; - } + int res; res = i2c_add_driver(&it87_driver); if (res) return res; - res = i2c_isa_add_driver(&it87_isa_driver); - if (res) { - i2c_del_driver(&it87_driver); - return res; + if (!it87_find(&isa_address)) { + res = i2c_isa_add_driver(&it87_isa_driver); + if (res) { + i2c_del_driver(&it87_driver); + return res; + } } return 0; -- GitLab From 862bc36f682b25dd97833f702b4f8c97661b8811 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:12:01 +0200 Subject: [PATCH 0673/1519] [PATCH] hwmon: Drop useless w83627hf initialization step Drop a useless initialization step in the w83627hf driver. The comment says that the W83627HF PWM2 can be disabled, but it can't. I suppose this is a leftover from the w83781d driver (from which the w83627hf driver is derived), as for example the W83782D had the ability to disable PWM2. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83627hf.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 494274d27f01..48270819ff99 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -201,7 +201,6 @@ superio_exit(void) #define W83627HF_REG_PWM1 0x5A #define W83627HF_REG_PWM2 0x5B -#define W83627HF_REG_PWMCLK12 0x5C #define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */ #define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */ @@ -1373,12 +1372,6 @@ static void w83627hf_init_client(struct i2c_client *client) } } - if (type == w83627hf) { - /* enable PWM2 control (can't hurt since PWM reg - should have been reset to 0xff) */ - w83627hf_write_value(client, W83627HF_REG_PWMCLK12, - 0x19); - } /* enable comparator mode for temp2 and temp3 so alarm indication will work correctly */ i = w83627hf_read_value(client, W83781D_REG_IRQ); -- GitLab From d3554b4a2fb0e2229eb0d3fa9ece5b2f0b906d3e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:14:17 +0200 Subject: [PATCH 0674/1519] [PATCH] i2c: Drop unused per-i2c-algorithm adapter max There are no more per-i2c-algorithm adapter max. Last time there were was in July 1999. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- include/linux/i2c-algo-bit.h | 2 -- include/linux/i2c-algo-pca.h | 2 -- include/linux/i2c-algo-pcf.h | 2 -- 3 files changed, 6 deletions(-) diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index fb592147caec..c0e7fab28ce3 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -44,8 +44,6 @@ struct i2c_algo_bit_data { int timeout; /* in jiffies */ }; -#define I2C_BIT_ADAP_MAX 16 - int i2c_bit_add_bus(struct i2c_adapter *); int i2c_bit_del_bus(struct i2c_adapter *); diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h index 941b786c5732..226693e0d88b 100644 --- a/include/linux/i2c-algo-pca.h +++ b/include/linux/i2c-algo-pca.h @@ -9,8 +9,6 @@ struct i2c_algo_pca_data { int (*wait_for_interrupt) (struct i2c_algo_pca_data *adap); }; -#define I2C_PCA_ADAP_MAX 16 - int i2c_pca_add_bus(struct i2c_adapter *); int i2c_pca_del_bus(struct i2c_adapter *); diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index a0e534b334a9..18b0adf57a3d 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -39,8 +39,6 @@ struct i2c_algo_pcf_data { int timeout; }; -#define I2C_PCF_ADAP_MAX 16 - int i2c_pcf_add_bus(struct i2c_adapter *); int i2c_pcf_del_bus(struct i2c_adapter *); -- GitLab From 30dac7469741906436b50f9413dccd446366d371 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:15:59 +0200 Subject: [PATCH 0675/1519] [PATCH] i2c: Drop I2C_SMBUS_I2C_BLOCK_MAX Drop I2C_SMBUS_I2C_BLOCK_MAX, use I2C_SMBUS_BLOCK_MAX instead. I2C_SMBUS_I2C_BLOCK_MAX has always been defined to the same value as I2C_SMBUS_BLOCK_MAX, and this will never change: setting it to a lower value would make no sense, setting it to a higher value would break i2c_smbus_data compatibility. There is no point in changing i2c_smbus_data to support larger block transactions in SMBus mode, as no SMBus hardware supports more than 32 byte blocks. Thus, for larger transactions, direct I2C transfers are the way to go. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/eeprom.c | 4 ++-- drivers/i2c/i2c-core.c | 8 ++++---- include/linux/i2c.h | 1 - 3 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index d58403a47908..7fb739c43935 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -88,8 +88,8 @@ static void eeprom_update_client(struct i2c_client *client, u8 slice) dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { - for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX) - if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX) + for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX) + if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX) goto exit; } else { if (i2c_smbus_write_byte(client, slice << 5)) { diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 9583a54ce16b..15354176ff63 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1108,10 +1108,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, return -1; case I2C_SMBUS_I2C_BLOCK_DATA: if (read_write == I2C_SMBUS_READ) { - msg[1].len = I2C_SMBUS_I2C_BLOCK_MAX; + msg[1].len = I2C_SMBUS_BLOCK_MAX; } else { msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_I2C_BLOCK_MAX + 1) { + if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with " "invalid block write size (%d)\n", data->block[0]); @@ -1144,8 +1144,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, break; case I2C_SMBUS_I2C_BLOCK_DATA: /* fixed at 32 for now */ - data->block[0] = I2C_SMBUS_I2C_BLOCK_MAX; - for (i = 0; i < I2C_SMBUS_I2C_BLOCK_MAX; i++) + data->block[0] = I2C_SMBUS_BLOCK_MAX; + for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++) data->block[i+1] = msgbuf1[i]; break; } diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 74103d0a8cd2..64c13c042f9d 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -448,7 +448,6 @@ struct i2c_msg { * Data for SMBus Messages */ #define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ -#define I2C_SMBUS_I2C_BLOCK_MAX 32 /* Not specified but we use same structure */ union i2c_smbus_data { __u8 byte; __u16 word; -- GitLab From 6c129be8c7bd1bdbd47ba8e17f6e5053ef04aee8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:17:35 +0200 Subject: [PATCH 0676/1519] [PATCH] i2c: Rename i2c-parport variable to avoid confusion It's a bit confusing to name a variable the same as an unrelated structure. The compiler doesn't complain, but it certainly makes the code harder to understand, and could confuse grep and LXR among others. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-parport.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 71a2502fe069..fa506187fbe1 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -232,7 +232,7 @@ static void i2c_parport_detach (struct parport *port) } } -static struct parport_driver i2c_driver = { +static struct parport_driver i2c_parport_driver = { .name = "i2c-parport", .attach = i2c_parport_attach, .detach = i2c_parport_detach, @@ -250,12 +250,12 @@ static int __init i2c_parport_init(void) type = 0; } - return parport_register_driver(&i2c_driver); + return parport_register_driver(&i2c_parport_driver); } static void __exit i2c_parport_exit(void) { - parport_unregister_driver(&i2c_driver); + parport_unregister_driver(&i2c_parport_driver); } MODULE_AUTHOR("Jean Delvare "); -- GitLab From 00bffb6e29c5ef12cea7904905f8b959187076c9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 8 Oct 2005 00:19:52 +0200 Subject: [PATCH 0677/1519] [PATCH] i2c: Drop meaningless use of I2C_DF_NOTIFY in i2c_client structures I2C_DF_NOTIFY is an i2c_driver flag, using it as an i2c_client flag doesn't make any sense. Signed-off-by: Jean Delvare Acked-by: Mark A. Greer Acked-by: Randy Vinson Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/ds1374.c | 1 - drivers/i2c/chips/m41t00.c | 1 - drivers/i2c/chips/rtc8564.c | 2 +- 3 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index 0936327a946d..ec640e9f085a 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -199,7 +199,6 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind) memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE); - client->flags = I2C_DF_NOTIFY; client->addr = addr; client->adapter = adap; client->driver = &ds1374_driver; diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c index 3f14528a52a9..554f7ba61627 100644 --- a/drivers/i2c/chips/m41t00.c +++ b/drivers/i2c/chips/m41t00.c @@ -180,7 +180,6 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind) memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE); - client->flags = I2C_DF_NOTIFY; client->addr = addr; client->adapter = adap; client->driver = &m41t00_driver; diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c index 0b5385c892b1..dd9d42d7b6e7 100644 --- a/drivers/i2c/chips/rtc8564.c +++ b/drivers/i2c/chips/rtc8564.c @@ -158,7 +158,7 @@ static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind) strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE); i2c_set_clientdata(new_client, d); - new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY; + new_client->flags = I2C_CLIENT_ALLOW_USE; new_client->addr = addr; new_client->adapter = adap; new_client->driver = &rtc8564_driver; -- GitLab From 3634ff6a32e90d9db0ec19297e80059143c1aa7f Mon Sep 17 00:00:00 2001 From: Stig Telfer Date: Sat, 8 Oct 2005 00:21:48 +0200 Subject: [PATCH 0678/1519] [PATCH] i2c: Fix i2c-elektor on Alpha This patch updates the i2c-elektor driver, enabling it to compile cleanly, load and run. The key change is that it uses the new __iomem/iowrite8/ioread8 functions to abstract the direct or memory-mapped variants of register access. Also, the original driver would crash on module load on the Alpha because the PCI memory region was not remapped into kernel memory. I have managed the following testing: * compiled and tested it on my Alpha UP2000+ system. * compiles cleanly for x86 but I don't have the hardware to test. Signed-off-by: Stig Telfer Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-elektor.c | 74 +++++++++++++++++++++----------- 1 file changed, 49 insertions(+), 25 deletions(-) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 6930b660e508..75b4b442a636 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -46,6 +46,8 @@ #define DEFAULT_BASE 0x330 static int base; +static u8 __iomem *base_iomem; + static int irq; static int clock = 0x1c; static int own = 0x55; @@ -64,36 +66,27 @@ static spinlock_t lock; static void pcf_isa_setbyte(void *data, int ctl, int val) { - int address = ctl ? (base + 1) : base; + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; /* enable irq if any specified for serial operation */ if (ctl && irq && (val & I2C_PCF_ESO)) { val |= I2C_PCF_ENI; } - pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255); - - switch (mmapped) { - case 0: /* regular I/O */ - outb(val, address); - break; - case 2: /* double mapped I/O needed for UP2000 board, - I don't know why this... */ - writeb(val, (void *)address); - /* fall */ - case 1: /* memory mapped I/O */ - writeb(val, (void *)address); - break; - } + pr_debug("i2c-elektor: Write %p 0x%02X\n", address, val); + iowrite8(val, address); +#ifdef __alpha__ + /* API UP2000 needs some hardware fudging to make the write stick */ + iowrite8(val, address); +#endif } static int pcf_isa_getbyte(void *data, int ctl) { - int address = ctl ? (base + 1) : base; - int val = mmapped ? readb((void *)address) : inb(address); - - pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val); + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; + int val = ioread8(address); + pr_debug("i2c-elektor: Read %p 0x%02X\n", address, val); return (val); } @@ -155,7 +148,30 @@ static int pcf_isa_init(void) "is in use.\n", base); return -ENODEV; } + base_iomem = ioport_map(base, 2); + if (!base_iomem) { + printk(KERN_ERR "i2c-elektor: remap of I/O region " + "%#x failed\n", base); + release_region(base, 2); + return -ENODEV; + } + } else { + if (!request_mem_region(base, 2, "i2c-elektor")) { + printk(KERN_ERR "i2c-elektor: requested memory region " + "(%#x:2) is in use\n", base); + return -ENODEV; + } + base_iomem = ioremap(base, 2); + if (base_iomem == NULL) { + printk(KERN_ERR "i2c-elektor: remap of memory region " + "%#x failed\n", base); + release_mem_region(base, 2); + return -ENODEV; + } } + pr_debug("i2c-elektor: registers %#x remapped to %p\n", base, + base_iomem); + if (irq > 0) { if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) { printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq); @@ -200,7 +216,7 @@ static int __init i2c_pcfisa_init(void) cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, NULL); if (cy693_dev) { - char config; + unsigned char config; /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { @@ -219,9 +235,7 @@ static int __init i2c_pcfisa_init(void) if ((config & 0x7f) == 0x61) { /* seems to be UP2000 like board */ base = 0xe0000; - /* I don't know why we need to - write twice */ - mmapped = 2; + mmapped = 1; /* UP2000 drives ISA with 8.25 MHz (PCI/4) clock (this can be read from cypress) */ @@ -262,8 +276,13 @@ static int __init i2c_pcfisa_init(void) free_irq(irq, NULL); } - if (!mmapped) + if (!mmapped) { + ioport_unmap(base_iomem); release_region(base , 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } return -ENODEV; } @@ -276,8 +295,13 @@ static void i2c_pcfisa_exit(void) free_irq(irq, NULL); } - if (!mmapped) + if (!mmapped) { + ioport_unmap(base_iomem); release_region(base , 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } } MODULE_AUTHOR("Hans Berglund "); -- GitLab From fe3d6a99782d5345b1927e872d77d1778668094b Mon Sep 17 00:00:00 2001 From: Stig Telfer Date: Sat, 8 Oct 2005 00:23:27 +0200 Subject: [PATCH 0679/1519] [PATCH] i2c: Big i2c-elektor cleanup Cleanups to the i2c-elektor driver: * Set the i2c_adapter name field to "i2c-elektor" and use this string in all resource requests and printks. * Change space-padding for tab indentation, kill trailing white space, remove space before comma. * Use dev_info, pr_info and pr_debug instead of printk. * Lines chopped to 80 columns. Signed-off-by: Stig Telfer Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-elektor.c | 84 +++++++++++++++++--------------- 1 file changed, 45 insertions(+), 39 deletions(-) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 75b4b442a636..59f8308c2356 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -22,7 +22,7 @@ /* With some changes from Kyösti Mälkki and even Frodo Looijaard */ -/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of +/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of for Alpha Processor Inc. UP-2000(+) boards */ #include @@ -53,7 +53,7 @@ static int clock = 0x1c; static int own = 0x55; static int mmapped; -/* vdovikin: removed static struct i2c_pcf_isa gpi; code - +/* vdovikin: removed static struct i2c_pcf_isa gpi; code - this module in real supports only one device, due to missing arguments in some functions, called from the algo-pcf module. Sometimes it's need to be rewriten - but for now just remove this for simpler reading */ @@ -62,6 +62,8 @@ static wait_queue_head_t pcf_wait; static int pcf_pending; static spinlock_t lock; +static struct i2c_adapter pcf_isa_ops; + /* ----- local functions ---------------------------------------------- */ static void pcf_isa_setbyte(void *data, int ctl, int val) @@ -73,7 +75,7 @@ static void pcf_isa_setbyte(void *data, int ctl, int val) val |= I2C_PCF_ENI; } - pr_debug("i2c-elektor: Write %p 0x%02X\n", address, val); + pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val); iowrite8(val, address); #ifdef __alpha__ /* API UP2000 needs some hardware fudging to make the write stick */ @@ -86,7 +88,7 @@ static int pcf_isa_getbyte(void *data, int ctl) u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; int val = ioread8(address); - pr_debug("i2c-elektor: Read %p 0x%02X\n", address, val); + pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val); return (val); } @@ -142,39 +144,40 @@ static int pcf_isa_init(void) { spin_lock_init(&lock); if (!mmapped) { - if (!request_region(base, 2, "i2c (isa bus adapter)")) { - printk(KERN_ERR - "i2c-elektor: requested I/O region (0x%X:2) " - "is in use.\n", base); + if (!request_region(base, 2, pcf_isa_ops.name)) { + printk(KERN_ERR "%s: requested I/O region (%#x:2) is " + "in use\n", pcf_isa_ops.name, base); return -ENODEV; } base_iomem = ioport_map(base, 2); if (!base_iomem) { - printk(KERN_ERR "i2c-elektor: remap of I/O region " - "%#x failed\n", base); + printk(KERN_ERR "%s: remap of I/O region %#x failed\n", + pcf_isa_ops.name, base); release_region(base, 2); return -ENODEV; } } else { - if (!request_mem_region(base, 2, "i2c-elektor")) { - printk(KERN_ERR "i2c-elektor: requested memory region " - "(%#x:2) is in use\n", base); + if (!request_mem_region(base, 2, pcf_isa_ops.name)) { + printk(KERN_ERR "%s: requested memory region (%#x:2) " + "is in use\n", pcf_isa_ops.name, base); return -ENODEV; } base_iomem = ioremap(base, 2); if (base_iomem == NULL) { - printk(KERN_ERR "i2c-elektor: remap of memory region " - "%#x failed\n", base); + printk(KERN_ERR "%s: remap of memory region %#x " + "failed\n", pcf_isa_ops.name, base); release_mem_region(base, 2); return -ENODEV; } } - pr_debug("i2c-elektor: registers %#x remapped to %p\n", base, + pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base, base_iomem); if (irq > 0) { - if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) { - printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq); + if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name, + NULL) < 0) { + printk(KERN_ERR "%s: Request irq%d failed\n", + pcf_isa_ops.name, irq); irq = 0; } else enable_irq(irq); @@ -202,45 +205,49 @@ static struct i2c_adapter pcf_isa_ops = { .class = I2C_CLASS_HWMON, .id = I2C_HW_P_ELEK, .algo_data = &pcf_isa_data, - .name = "PCF8584 ISA adapter", + .name = "i2c-elektor", }; -static int __init i2c_pcfisa_init(void) +static int __init i2c_pcfisa_init(void) { #ifdef __alpha__ - /* check to see we have memory mapped PCF8584 connected to the + /* check to see we have memory mapped PCF8584 connected to the Cypress cy82c693 PCI-ISA bridge as on UP2000 board */ if (base == 0) { struct pci_dev *cy693_dev; - - cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, + + cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, NULL); if (cy693_dev) { unsigned char config; /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { - - pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config); + + pr_debug("%s: found cy82c693, config " + "register 0x47 = 0x%02x\n", + pcf_isa_ops.name, config); /* UP2000 board has this register set to 0xe1, - but the most significant bit as seems can be + but the most significant bit as seems can be reset during the proper initialisation - sequence if guys from API decides to do that - (so, we can even enable Tsunami Pchip - window for the upper 1 Gb) */ + sequence if guys from API decides to do that + (so, we can even enable Tsunami Pchip + window for the upper 1 Gb) */ /* so just check for ROMCS at 0xe0000, - ROMCS enabled for writes + ROMCS enabled for writes and external XD Bus buffer in use. */ if ((config & 0x7f) == 0x61) { /* seems to be UP2000 like board */ base = 0xe0000; mmapped = 1; - /* UP2000 drives ISA with + /* UP2000 drives ISA with 8.25 MHz (PCI/4) clock (this can be read from cypress) */ clock = I2C_PCF_CLK | I2C_PCF_TRNS90; - printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n"); + pr_info("%s: found API UP2000 like " + "board, will probe PCF8584 " + "later\n", pcf_isa_ops.name); } } pci_dev_put(cy693_dev); @@ -250,12 +257,11 @@ static int __init i2c_pcfisa_init(void) /* sanity checks for mmapped I/O */ if (mmapped && base < 0xc8000) { - printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base); + printk(KERN_ERR "%s: incorrect base address (%#x) specified " + "for mmapped I/O\n", pcf_isa_ops.name, base); return -ENODEV; } - printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n"); - if (base == 0) { base = DEFAULT_BASE; } @@ -265,8 +271,8 @@ static int __init i2c_pcfisa_init(void) return -ENODEV; if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) goto fail; - - printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base); + + dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base); return 0; @@ -278,7 +284,7 @@ static int __init i2c_pcfisa_init(void) if (!mmapped) { ioport_unmap(base_iomem); - release_region(base , 2); + release_region(base, 2); } else { iounmap(base_iomem); release_mem_region(base, 2); @@ -297,7 +303,7 @@ static void i2c_pcfisa_exit(void) if (!mmapped) { ioport_unmap(base_iomem); - release_region(base , 2); + release_region(base, 2); } else { iounmap(base_iomem); release_mem_region(base, 2); -- GitLab From ccd7aa0cc9413b79b69f6cd7c18daa1c22dfa512 Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:47:48 +0200 Subject: [PATCH 0680/1519] [PATCH] Owner field additions to many i2c drivers, 1 of 5 This patch updates .owner field for various struct pci_driver variables. Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-ali1535.c | 1 + drivers/i2c/busses/i2c-ali1563.c | 1 + drivers/i2c/busses/i2c-ali15x3.c | 1 + drivers/i2c/busses/i2c-amd756.c | 1 + drivers/i2c/busses/i2c-amd8111.c | 1 + drivers/i2c/busses/i2c-hydra.c | 1 + drivers/i2c/busses/i2c-i801.c | 1 + drivers/i2c/busses/i2c-i810.c | 1 + drivers/i2c/busses/i2c-nforce2.c | 1 + drivers/i2c/busses/i2c-piix4.c | 1 + drivers/i2c/busses/i2c-prosavage.c | 1 + drivers/i2c/busses/i2c-savage4.c | 1 + drivers/i2c/busses/i2c-sis5595.c | 1 + drivers/i2c/busses/i2c-sis630.c | 1 + drivers/i2c/busses/i2c-sis96x.c | 1 + drivers/i2c/busses/i2c-via.c | 1 + drivers/i2c/busses/i2c-viapro.c | 1 + drivers/i2c/busses/i2c-voodoo3.c | 1 + 18 files changed, 18 insertions(+) diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 3eb47890db40..ba90f5140af6 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -513,6 +513,7 @@ static void __devexit ali1535_remove(struct pci_dev *dev) } static struct pci_driver ali1535_driver = { + .owner = THIS_MODULE, .name = "ali1535_smbus", .id_table = ali1535_ids, .probe = ali1535_probe, diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index e6f63208fc4a..f1a62d892425 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -408,6 +408,7 @@ static struct pci_device_id __devinitdata ali1563_id_table[] = { MODULE_DEVICE_TABLE (pci, ali1563_id_table); static struct pci_driver ali1563_pci_driver = { + .owner = THIS_MODULE, .name = "ali1563_smbus", .id_table = ali1563_id_table, .probe = ali1563_probe, diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 7a5c0941dbc1..400b08ed4299 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -504,6 +504,7 @@ static void __devexit ali15x3_remove(struct pci_dev *dev) } static struct pci_driver ali15x3_driver = { + .owner = THIS_MODULE, .name = "ali15x3_smbus", .id_table = ali15x3_ids, .probe = ali15x3_probe, diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 1750dedaf4b5..de035d137c3f 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -401,6 +401,7 @@ static void __devexit amd756_remove(struct pci_dev *dev) } static struct pci_driver amd756_driver = { + .owner = THIS_MODULE, .name = "amd756_smbus", .id_table = amd756_ids, .probe = amd756_probe, diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 6200c9a087ad..0d29e78dff63 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -392,6 +392,7 @@ static void __devexit amd8111_remove(struct pci_dev *dev) } static struct pci_driver amd8111_driver = { + .owner = THIS_MODULE, .name = "amd8111_smbus2", .id_table = amd8111_ids, .probe = amd8111_probe, diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index e0cb3b0f92fa..1b5354e24bf5 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -155,6 +155,7 @@ static void __devexit hydra_remove(struct pci_dev *dev) static struct pci_driver hydra_driver = { + .owner = THIS_MODULE, .name = "hydra_smbus", .id_table = hydra_ids, .probe = hydra_probe, diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 413930cafc49..e90b6c4e7da3 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -568,6 +568,7 @@ static void __devexit i801_remove(struct pci_dev *dev) } static struct pci_driver i801_driver = { + .owner = THIS_MODULE, .name = "i801_smbus", .id_table = i801_ids, .probe = i801_probe, diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 0ff7016e0629..1b3393b7c461 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -232,6 +232,7 @@ static void __devexit i810_remove(struct pci_dev *dev) } static struct pci_driver i810_driver = { + .owner = THIS_MODULE, .name = "i810_smbus", .id_table = i810_ids, .probe = i810_probe, diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index dd4b6d8e03ef..5dc62114cc8d 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -356,6 +356,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev) } static struct pci_driver nforce2_driver = { + .owner = THIS_MODULE, .name = "nForce2_smbus", .id_table = nforce2_ids, .probe = nforce2_probe, diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 692f47345481..7d63eec423fe 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -462,6 +462,7 @@ static void __devexit piix4_remove(struct pci_dev *dev) } static struct pci_driver piix4_driver = { + .owner = THIS_MODULE, .name = "piix4_smbus", .id_table = piix4_ids, .probe = piix4_probe, diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 83fd16d61ce5..92b744273577 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -308,6 +308,7 @@ static struct pci_device_id prosavage_pci_tbl[] = { MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl); static struct pci_driver prosavage_driver = { + .owner = THIS_MODULE, .name = "prosavage_smbus", .id_table = prosavage_pci_tbl, .probe = prosavage_probe, diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 0c8518298e4d..aebe87ba4033 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -179,6 +179,7 @@ static void __devexit savage4_remove(struct pci_dev *dev) } static struct pci_driver savage4_driver = { + .owner = THIS_MODULE, .name = "savage4_smbus", .id_table = savage4_ids, .probe = savage4_probe, diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index b57ab74d23ec..3ad27c3ba15b 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -398,6 +398,7 @@ static void __devexit sis5595_remove(struct pci_dev *dev) } static struct pci_driver sis5595_driver = { + .owner = THIS_MODULE, .name = "sis5595_smbus", .id_table = sis5595_ids, .probe = sis5595_probe, diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index acb75e282414..7f49e5fd3ff0 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -496,6 +496,7 @@ static void __devexit sis630_remove(struct pci_dev *dev) static struct pci_driver sis630_driver = { + .owner = THIS_MODULE, .name = "sis630_smbus", .id_table = sis630_ids, .probe = sis630_probe, diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 3024907cdafe..6a134c091324 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -329,6 +329,7 @@ static void __devexit sis96x_remove(struct pci_dev *dev) } static struct pci_driver sis96x_driver = { + .owner = THIS_MODULE, .name = "sis96x_smbus", .id_table = sis96x_ids, .probe = sis96x_probe, diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 484bbacfce6b..544a38e64394 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -159,6 +159,7 @@ static void __devexit vt586b_remove(struct pci_dev *dev) static struct pci_driver vt586b_driver = { + .owner = THIS_MODULE, .name = "vt586b_smbus", .id_table = vt586b_ids, .probe = vt586b_probe, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 566342d50c5f..c9366b504833 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -439,6 +439,7 @@ static struct pci_device_id vt596_ids[] = { MODULE_DEVICE_TABLE(pci, vt596_ids); static struct pci_driver vt596_driver = { + .owner = THIS_MODULE, .name = "vt596_smbus", .id_table = vt596_ids, .probe = vt596_probe, diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index b675773b0cc1..650c3ebde84c 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -225,6 +225,7 @@ static void __devexit voodoo3_remove(struct pci_dev *dev) } static struct pci_driver voodoo3_driver = { + .owner = THIS_MODULE, .name = "voodoo3_smbus", .id_table = voodoo3_ids, .probe = voodoo3_probe, -- GitLab From 0cf3628181660be4e21fe520766dcbc3da9d71c8 Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:51:37 +0200 Subject: [PATCH 0681/1519] [PATCH] Owner field additions to many i2c drivers, 2 of 5 This patch updates the .owner field for various struct xxxx_driver variables, other than pci_driver. Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Acked-by: Mark A. Greer Acked-by: Ben Dooks Acked-by: Deepak Saxena Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-iop3xx.c | 1 + drivers/i2c/busses/i2c-ixp2000.c | 1 + drivers/i2c/busses/i2c-ixp4xx.c | 1 + drivers/i2c/busses/i2c-mpc.c | 1 + drivers/i2c/busses/i2c-mv64xxx.c | 1 + drivers/i2c/busses/i2c-s3c2410.c | 2 ++ drivers/i2c/chips/isp1301_omap.c | 1 + 7 files changed, 8 insertions(+) diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 745e3a51f3e5..0f7dfd8f4546 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -525,6 +525,7 @@ iop3xx_i2c_probe(struct device *dev) static struct device_driver iop3xx_i2c_driver = { + .owner = THIS_MODULE, .name = "IOP3xx-I2C", .bus = &platform_bus_type, .probe = iop3xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 9dee505ceed2..c3292dc743f1 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -146,6 +146,7 @@ static int ixp2000_i2c_probe(struct device *dev) } static struct device_driver ixp2000_i2c_driver = { + .owner = THIS_MODULE, .name = "IXP2000-I2C", .bus = &platform_bus_type, .probe = ixp2000_i2c_probe, diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 013981df38af..3169280c25a6 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -155,6 +155,7 @@ static int ixp4xx_i2c_probe(struct device *dev) } static struct device_driver ixp4xx_i2c_driver = { + .owner = THIS_MODULE, .name = "IXP4XX-I2C", .bus = &platform_bus_type, .probe = ixp4xx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index f065583ddcf1..b81c54620030 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -361,6 +361,7 @@ static int fsl_i2c_remove(struct device *device) /* Structure for a device driver */ static struct device_driver fsl_i2c_driver = { + .owner = THIS_MODULE, .name = "fsl-i2c", .bus = &platform_bus_type, .probe = fsl_i2c_probe, diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 99abca45fece..69709ee0b896 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -570,6 +570,7 @@ mv64xxx_i2c_remove(struct device *dev) } static struct device_driver mv64xxx_i2c_driver = { + .owner = THIS_MODULE, .name = MV64XXX_I2C_CTLR_NAME, .bus = &platform_bus_type, .probe = mv64xxx_i2c_probe, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 69fa282df2d5..6ced28e90070 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -896,6 +896,7 @@ static int s3c24xx_i2c_resume(struct device *dev) /* device driver for platform bus bits */ static struct device_driver s3c2410_i2c_driver = { + .owner = THIS_MODULE, .name = "s3c2410-i2c", .bus = &platform_bus_type, .probe = s3c24xx_i2c_probe, @@ -904,6 +905,7 @@ static struct device_driver s3c2410_i2c_driver = { }; static struct device_driver s3c2440_i2c_driver = { + .owner = THIS_MODULE, .name = "s3c2440-i2c", .bus = &platform_bus_type, .probe = s3c24xx_i2c_probe, diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 8ee56d4b3891..eaa4742e04fa 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -888,6 +888,7 @@ static int otg_remove(struct device *dev) } struct device_driver omap_otg_driver = { + .owner = THIS_MODULE, .name = "omap_otg", .bus = &platform_bus_type, .probe = otg_probe, -- GitLab From e78f857cc5299c3f6b3d046084696ef205948837 Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:53:52 +0200 Subject: [PATCH 0682/1519] [PATCH] Owner field additions to many i2c drivers, 3 of 5 This patch updates the .owner field for various struct xxxx_driver variables which are available on PPC_MAC arch. This one was _not_ even compile-tested... Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-keywest.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index eff5896ce865..34e43c8d8d5e 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -716,6 +716,7 @@ static struct of_device_id i2c_keywest_match[] = static struct macio_driver i2c_keywest_macio_driver = { + .owner = THIS_MODULE, .name = "i2c-keywest", .match_table = i2c_keywest_match, .probe = create_iface_macio, @@ -724,6 +725,7 @@ static struct macio_driver i2c_keywest_macio_driver = static struct of_platform_driver i2c_keywest_of_platform_driver = { + .owner = THIS_MODULE, .name = "i2c-keywest", .match_table = i2c_keywest_match, .probe = create_iface_of_platform, -- GitLab From 6586bcd7b2bbe255110b2db772da4415c7865a2a Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:54:45 +0200 Subject: [PATCH 0683/1519] [PATCH] Owner field additions to many i2c drivers, 4 of 5 This patch updates the .owner field for the i2c core struct xxxx_driver variables. Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 15354176ff63..0040981b6698 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -85,6 +85,7 @@ void i2c_adapter_dev_release(struct device *dev) } struct device_driver i2c_adapter_driver = { + .owner = THIS_MODULE, .name = "i2c_adapter", .bus = &i2c_bus_type, .probe = i2c_device_probe, @@ -98,6 +99,7 @@ static void i2c_adapter_class_dev_release(struct class_device *dev) } struct class i2c_adapter_class = { + .owner = THIS_MODULE, .name = "i2c-adapter", .release = &i2c_adapter_class_dev_release, }; @@ -291,6 +293,7 @@ int i2c_add_driver(struct i2c_driver *driver) down(&core_lists); /* add the driver to the list of i2c drivers in the driver core */ + driver->driver.owner = driver->owner; driver->driver.name = driver->name; driver->driver.bus = &i2c_bus_type; driver->driver.probe = i2c_device_probe; -- GitLab From 1747ef1b8c9b7b9c6a9aae3543a9b99acabb7e10 Mon Sep 17 00:00:00 2001 From: Laurent Riffard Date: Mon, 17 Oct 2005 22:58:35 +0200 Subject: [PATCH 0684/1519] [PATCH] Owner field additions to many i2c drivers, 5 of 5 In function i2c_isa_add_driver, copied driver should inherit the owner field as well as the name field. Signed-off-by: Laurent Riffard Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-isa.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index bdc6806dafae..4fdc02411609 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -92,6 +92,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver) /* Add the driver to the list of i2c drivers in the driver core */ driver->driver.name = driver->name; + driver->driver.owner = driver->owner; driver->driver.bus = &i2c_bus_type; driver->driver.probe = i2c_isa_device_probe; driver->driver.remove = i2c_isa_device_remove; -- GitLab From 7ab83a9137ccd3e092fb6ad0cb105b4d1fb617ae Mon Sep 17 00:00:00 2001 From: "Mark M. Hoffman" Date: Mon, 17 Oct 2005 23:01:45 +0200 Subject: [PATCH 0685/1519] [PATCH] hwmon: New device ID for the smsc47b397 driver This patch adds a new ID to the SMSC LPC47B397-NC hardware monitoring driver - for a chip that is claimed to be 100% compatible otherwise. Signed-off-by: Bryan Young (Utilitek Systems, Inc.) Signed-off-by: Mark M. Hoffman Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/smsc47b397 | 8 ++++++-- drivers/hwmon/smsc47b397.c | 7 ++++--- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397 index da9d80c96432..20682f15ae41 100644 --- a/Documentation/hwmon/smsc47b397 +++ b/Documentation/hwmon/smsc47b397 @@ -3,6 +3,7 @@ Kernel driver smsc47b397 Supported chips: * SMSC LPC47B397-NC + * SMSC SCH5307-NS Prefix: 'smsc47b397' Addresses scanned: none, address read from Super I/O config space Datasheet: In this file @@ -12,11 +13,14 @@ Authors: Mark M. Hoffman November 23, 2004 -The following specification describes the SMSC LPC47B397-NC sensor chip +The following specification describes the SMSC LPC47B397-NC[1] sensor chip (for which there is no public datasheet available). This document was provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected by Mark M. Hoffman . +[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise +compatible. + * * * * * Methods for detecting the HP SIO and reading the thermal data on a dc7100. @@ -127,7 +131,7 @@ OUT DX,AL The registers of interest for identifying the SIO on the dc7100 are Device ID (0x20) and Device Rev (0x21). -The Device ID will read 0X6F +The Device ID will read 0x6F (for SCH5307-NS, 0x81) The Device Rev currently reads 0x01 Obtaining the HWM Base Address. diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index 7fe71576dea4..37ed8b33f01a 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -299,7 +299,7 @@ static int __init smsc47b397_find(unsigned short *addr) superio_enter(); id = superio_inb(SUPERIO_REG_DEVID); - if (id != 0x6f) { + if ((id != 0x6f) && (id != 0x81)) { superio_exit(); return -ENODEV; } @@ -310,8 +310,9 @@ static int __init smsc47b397_find(unsigned short *addr) *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) | superio_inb(SUPERIO_REG_BASE_LSB); - printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC " - "(base address 0x%04x, revision %u)\n", *addr, rev); + printk(KERN_INFO "smsc47b397: found SMSC %s " + "(base address 0x%04x, revision %u)\n", + id == 0x81 ? "SCH5307-NS" : "LPC47B397-NC", *addr, rev); superio_exit(); return 0; -- GitLab From ddec748f328af6b67e4d0ce0248a8e9f36751827 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 17 Oct 2005 23:02:42 +0200 Subject: [PATCH 0686/1519] [PATCH] hwmon: Missing class check in two hwmon drivers The atxp1 and ds1621 drivers should make sure they do not probe non-hwmon i2c adapters. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/atxp1.c | 2 ++ drivers/hwmon/ds1621.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index deb4d34c9539..441324fc6b8b 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -253,6 +253,8 @@ static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2); static int atxp1_attach_adapter(struct i2c_adapter *adapter) { + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; return i2c_probe(adapter, &addr_data, &atxp1_detect); }; diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index b0199e063d0e..e1ff22cf984a 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -180,6 +180,8 @@ static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); static int ds1621_attach_adapter(struct i2c_adapter *adapter) { + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; return i2c_probe(adapter, &addr_data, ds1621_detect); } -- GitLab From 4d4e5ce8648561b964699afb2df5e7268a84599b Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Mon, 17 Oct 2005 23:04:42 +0200 Subject: [PATCH 0687/1519] [PATCH] i2c: New Xicor X1205 RTC driver New driver for the Xicor X1205 RTC chip. Signed-off-by: Alessandro Zummo Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/chips/x1205 | 38 ++ drivers/i2c/chips/Kconfig | 9 + drivers/i2c/chips/Makefile | 1 + drivers/i2c/chips/x1205.c | 698 ++++++++++++++++++++++++++++++++++ include/linux/x1205.h | 31 ++ 5 files changed, 777 insertions(+) create mode 100644 Documentation/i2c/chips/x1205 create mode 100644 drivers/i2c/chips/x1205.c create mode 100644 include/linux/x1205.h diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205 new file mode 100644 index 000000000000..09407c991fe5 --- /dev/null +++ b/Documentation/i2c/chips/x1205 @@ -0,0 +1,38 @@ +Kernel driver x1205 +=================== + +Supported chips: + * Xicor X1205 RTC + Prefix: 'x1205' + Addresses scanned: none + Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html + +Authors: + Karen Spearel , + Alessandro Zummo + +Description +----------- + +This module aims to provide complete access to the Xicor X1205 RTC. +Recently Xicor has merged with Intersil, but the chip is +still sold under the Xicor brand. + +This chip is located at address 0x6f and uses a 2-byte register addressing. +Two bytes need to be written to read a single register, while most +other chips just require one and take the second one as the data +to be written. To prevent corrupting unknown chips, the user must +explicitely set the probe parameter. + +example: + +modprobe x1205 probe=0,0x6f + +The module supports one more option, hctosys, which is used to set the +software clock from the x1205. On systems where the x1205 is the +only hardware rtc, this parameter could be used to achieve a correct +date/time earlier in the system boot sequence. + +example: + +modprobe x1205 probe=0,0x6f hctosys=1 diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 6bd44a44cd28..f9fae28f5612 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -126,4 +126,13 @@ config SENSORS_MAX6875 This driver can also be built as a module. If so, the module will be called max6875. +config RTC_X1205_I2C + tristate "Xicor X1205 RTC chip" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Xicor X1205 RTC chip. + + This driver can also be built as a module. If so, the module + will be called x1205. + endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index a876dd42b860..46178b57b1f1 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o +obj-$(CONFIG_RTC_X1205_I2C) += x1205.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c new file mode 100644 index 000000000000..7da366cdc18c --- /dev/null +++ b/drivers/i2c/chips/x1205.c @@ -0,0 +1,698 @@ +/* + * x1205.c - An i2c driver for the Xicor X1205 RTC + * Copyright 2004 Karen Spearel + * Copyright 2005 Alessandro Zummo + * + * please send all reports to: + * kas11 at tampabay dot rr dot com + * a dot zummo at towertech dot it + * + * based on the other drivers in this same directory. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRV_VERSION "0.9.9" + +/* Addresses to scan: none. This chip is located at + * 0x6f and uses a two bytes register addressing. + * Two bytes need to be written to read a single register, + * while most other chips just require one and take the second + * one as the data to be written. To prevent corrupting + * unknown chips, the user must explicitely set the probe parameter. + */ + +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD; +I2C_CLIENT_MODULE_PARM(hctosys, + "Set the system time from the hardware clock upon initialization"); + +/* offsets into CCR area */ + +#define CCR_SEC 0 +#define CCR_MIN 1 +#define CCR_HOUR 2 +#define CCR_MDAY 3 +#define CCR_MONTH 4 +#define CCR_YEAR 5 +#define CCR_WDAY 6 +#define CCR_Y2K 7 + +#define X1205_REG_SR 0x3F /* status register */ +#define X1205_REG_Y2K 0x37 +#define X1205_REG_DW 0x36 +#define X1205_REG_YR 0x35 +#define X1205_REG_MO 0x34 +#define X1205_REG_DT 0x33 +#define X1205_REG_HR 0x32 +#define X1205_REG_MN 0x31 +#define X1205_REG_SC 0x30 +#define X1205_REG_DTR 0x13 +#define X1205_REG_ATR 0x12 +#define X1205_REG_INT 0x11 +#define X1205_REG_0 0x10 +#define X1205_REG_Y2K1 0x0F +#define X1205_REG_DWA1 0x0E +#define X1205_REG_YRA1 0x0D +#define X1205_REG_MOA1 0x0C +#define X1205_REG_DTA1 0x0B +#define X1205_REG_HRA1 0x0A +#define X1205_REG_MNA1 0x09 +#define X1205_REG_SCA1 0x08 +#define X1205_REG_Y2K0 0x07 +#define X1205_REG_DWA0 0x06 +#define X1205_REG_YRA0 0x05 +#define X1205_REG_MOA0 0x04 +#define X1205_REG_DTA0 0x03 +#define X1205_REG_HRA0 0x02 +#define X1205_REG_MNA0 0x01 +#define X1205_REG_SCA0 0x00 + +#define X1205_CCR_BASE 0x30 /* Base address of CCR */ +#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ + +#define X1205_SR_RTCF 0x01 /* Clock failure */ +#define X1205_SR_WEL 0x02 /* Write Enable Latch */ +#define X1205_SR_RWEL 0x04 /* Register Write Enable */ + +#define X1205_DTR_DTR0 0x01 +#define X1205_DTR_DTR1 0x02 +#define X1205_DTR_DTR2 0x04 + +#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ + +/* Prototypes */ +static int x1205_attach(struct i2c_adapter *adapter); +static int x1205_detach(struct i2c_client *client); +static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); +static int x1205_command(struct i2c_client *client, unsigned int cmd, + void *arg); + +static struct i2c_driver x1205_driver = { + .owner = THIS_MODULE, + .name = "x1205", + .flags = I2C_DF_NOTIFY, + .attach_adapter = &x1205_attach, + .detach_client = &x1205_detach, +}; + +struct x1205_data { + struct i2c_client client; + struct list_head list; + unsigned int epoch; +}; + +static const unsigned char days_in_mo[] = + { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; + +static LIST_HEAD(x1205_clients); + +/* Workaround until the I2C subsytem will allow to send + * commands to a specific client. This function will send the command + * to the first client. + */ +int x1205_do_command(unsigned int cmd, void *arg) +{ + struct list_head *walk; + struct list_head *tmp; + struct x1205_data *data; + + list_for_each_safe(walk, tmp, &x1205_clients) { + data = list_entry(walk, struct x1205_data, list); + return x1205_command(&data->client, cmd, arg); + } + + return -ENODEV; +} + +#define is_leap(year) \ + ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) + +/* make sure the rtc_time values are in bounds */ +static int x1205_validate_tm(struct rtc_time *tm) +{ + int year = tm->tm_year + 1900; + + if ((tm->tm_year < 70) || (tm->tm_year > 255)) + return -EINVAL; + + if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) + return -EINVAL; + + if (tm->tm_mday > days_in_mo[tm->tm_mon] + + ((tm->tm_mon == 1) && is_leap(year))) + return -EINVAL; + + if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) + return -EINVAL; + + return 0; +} + +/* + * In the routines that deal directly with the x1205 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch + * Epoch is initialized as 2000. Time is set to UTC. + */ +static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, + u8 reg_base) +{ + unsigned char dt_addr[2] = { 0, reg_base }; + static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; + + unsigned char buf[8], sr; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, sr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &sr }, /* read status */ + { client->addr, 0, 2, dt_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 8, buf }, /* read date */ + }; + + struct x1205_data *data = i2c_get_clientdata(client); + + /* read status register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + /* check for battery failure */ + if (sr & X1205_SR_RTCF) { + dev_warn(&client->dev, + "Clock had a power failure, you must set the date.\n"); + return -EINVAL; + } + + /* read date registers */ + if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, + "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " + "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", + __FUNCTION__, + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7]); + + tm->tm_sec = BCD2BIN(buf[CCR_SEC]); + tm->tm_min = BCD2BIN(buf[CCR_MIN]); + tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ + tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); + tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); + data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; + tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900; + tm->tm_wday = buf[CCR_WDAY]; + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, + int datetoo, u8 reg_base) +{ + int i, err, xfer; + + unsigned char buf[8]; + + static const unsigned char wel[3] = { 0, X1205_REG_SR, + X1205_SR_WEL }; + + static const unsigned char rwel[3] = { 0, X1205_REG_SR, + X1205_SR_WEL | X1205_SR_RWEL }; + + static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; + + struct x1205_data *data = i2c_get_clientdata(client); + + /* check if all values in the tm struct are correct */ + if ((err = x1205_validate_tm(tm)) < 0) + return err; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __FUNCTION__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + buf[CCR_SEC] = BIN2BCD(tm->tm_sec); + buf[CCR_MIN] = BIN2BCD(tm->tm_min); + + /* set hour and 24hr bit */ + buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; + + /* should we also set the date? */ + if (datetoo) { + buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); + + /* month, 0 - 11 */ + buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); + + /* year, since 1900 */ + buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch); + buf[CCR_WDAY] = tm->tm_wday & 0x07; + buf[CCR_Y2K] = BIN2BCD(data->epoch / 100); + } + + /* this sequence is required to unlock the chip */ + xfer = i2c_master_send(client, wel, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + xfer = i2c_master_send(client, rwel, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + /* write register's data */ + for (i = 0; i < (datetoo ? 8 : 3); i++) { + unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; + + xfer = i2c_master_send(client, rdata, 3); + if (xfer != 3) { + dev_err(&client->dev, + "%s: xfer=%d addr=%02x, data=%02x\n", + __FUNCTION__, + xfer, rdata[1], rdata[2]); + return -EIO; + } + }; + + /* disable further writes */ + xfer = i2c_master_send(client, diswe, 3); + if (xfer != 3) { + dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); + return -EIO; + } + + return 0; +} + +static int x1205_get_dtrim(struct i2c_client *client, int *trim) +{ + unsigned char dtr; + static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ + }; + + /* read dtr register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); + + *trim = 0; + + if (dtr & X1205_DTR_DTR0) + *trim += 20; + + if (dtr & X1205_DTR_DTR1) + *trim += 10; + + if (dtr & X1205_DTR_DTR2) + *trim = -*trim; + + return 0; +} + +static int x1205_get_atrim(struct i2c_client *client, int *trim) +{ + s8 atr; + static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; + + struct i2c_msg msgs[] = { + { client->addr, 0, 2, atr_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ + }; + + /* read atr register */ + if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + dev_err(&client->dev, "%s: read error\n", __FUNCTION__); + return -EIO; + } + + dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); + + /* atr is a two's complement value on 6 bits, + * perform sign extension. The formula is + * Catr = (atr * 0.25pF) + 11.00pF. + */ + if (atr & 0x20) + atr |= 0xC0; + + dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); + + *trim = (atr * 250) + 11000; + + dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); + + return 0; +} + +static int x1205_hctosys(struct i2c_client *client) +{ + int err; + + struct rtc_time tm; + struct timespec tv; + + err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); + + if (err) { + dev_err(&client->dev, + "Unable to set the system clock\n"); + return err; + } + + /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary + * whether it stores the most close value or the value with partial + * seconds truncated. However, it is important that we use it to store + * the truncated value. This is because otherwise it is necessary, + * in an rtc sync function, to read both xtime.tv_sec and + * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read + * of >32bits is not possible. So storing the most close value would + * slow down the sync API. So here we have the truncated value and + * the best guess is to add 0.5s. + */ + + tv.tv_nsec = NSEC_PER_SEC >> 1; + + /* WARNING: this is not the C library 'mktime' call, it is a built in + * inline function from include/linux/time.h. It expects (requires) + * the month to be in the range 1-12 + */ + + tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, + tm.tm_min, tm.tm_sec); + + do_settimeofday(&tv); + + dev_info(&client->dev, + "setting the system clock to %d-%d-%d %d:%d:%d\n", + tm.tm_year + 1900, tm.tm_mon + 1, + tm.tm_mday, tm.tm_hour, tm.tm_min, + tm.tm_sec); + + return 0; +} + +struct x1205_limit +{ + unsigned char reg; + unsigned char mask; + unsigned char min; + unsigned char max; +}; + +static int x1205_validate_client(struct i2c_client *client) +{ + int i, xfer; + + /* Probe array. We will read the register at the specified + * address and check if the given bits are zero. + */ + static const unsigned char probe_zero_pattern[] = { + /* register, mask */ + X1205_REG_SR, 0x18, + X1205_REG_DTR, 0xF8, + X1205_REG_ATR, 0xC0, + X1205_REG_INT, 0x18, + X1205_REG_0, 0xFF, + }; + + static const struct x1205_limit probe_limits_pattern[] = { + /* register, mask, min, max */ + { X1205_REG_Y2K, 0xFF, 19, 20 }, + { X1205_REG_DW, 0xFF, 0, 6 }, + { X1205_REG_YR, 0xFF, 0, 99 }, + { X1205_REG_MO, 0xFF, 0, 12 }, + { X1205_REG_DT, 0xFF, 0, 31 }, + { X1205_REG_HR, 0x7F, 0, 23 }, + { X1205_REG_MN, 0xFF, 0, 59 }, + { X1205_REG_SC, 0xFF, 0, 59 }, + { X1205_REG_Y2K1, 0xFF, 19, 20 }, + { X1205_REG_Y2K0, 0xFF, 19, 20 }, + }; + + /* check that registers have bits a 0 where expected */ + for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { + unsigned char buf; + + unsigned char addr[2] = { 0, probe_zero_pattern[i] }; + + struct i2c_msg msgs[2] = { + { client->addr, 0, 2, addr }, + { client->addr, I2C_M_RD, 1, &buf }, + }; + + xfer = i2c_transfer(client->adapter, msgs, 2); + if (xfer != 2) { + dev_err(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + + return -EIO; + } + + if ((buf & probe_zero_pattern[i+1]) != 0) { + dev_err(&client->adapter->dev, + "%s: register=%02x, zero pattern=%d, value=%x\n", + __FUNCTION__, addr[1], i, buf); + + return -ENODEV; + } + } + + /* check limits (only registers with bcd values) */ + for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { + unsigned char reg, value; + + unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; + + struct i2c_msg msgs[2] = { + { client->addr, 0, 2, addr }, + { client->addr, I2C_M_RD, 1, ® }, + }; + + xfer = i2c_transfer(client->adapter, msgs, 2); + + if (xfer != 2) { + dev_err(&client->adapter->dev, + "%s: could not read register %x\n", + __FUNCTION__, addr[1]); + + return -EIO; + } + + value = BCD2BIN(reg & probe_limits_pattern[i].mask); + + if (value > probe_limits_pattern[i].max || + value < probe_limits_pattern[i].min) { + dev_dbg(&client->adapter->dev, + "%s: register=%x, lim pattern=%d, value=%d\n", + __FUNCTION__, addr[1], i, value); + + return -ENODEV; + } + } + + return 0; +} + +static int x1205_attach(struct i2c_adapter *adapter) +{ + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + + return i2c_probe(adapter, &addr_data, x1205_probe); +} + +int x1205_direct_attach(int adapter_id, + struct i2c_client_address_data *address_data) +{ + int err; + struct i2c_adapter *adapter = i2c_get_adapter(adapter_id); + + if (adapter) { + err = i2c_probe(adapter, + address_data, x1205_probe); + + i2c_put_adapter(adapter); + + return err; + } + + return -ENODEV; +} + +static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct x1205_data *data; + + int err = 0; + + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + err = -ENODEV; + goto exit; + } + + if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + /* Initialize our structures */ + data->epoch = 2000; + + client = &data->client; + client->addr = address; + client->driver = &x1205_driver; + client->adapter = adapter; + + strlcpy(client->name, "x1205", I2C_NAME_SIZE); + + i2c_set_clientdata(client, data); + + /* Verify the chip is really an X1205 */ + if (kind < 0) { + if (x1205_validate_client(client) < 0) { + err = -ENODEV; + goto exit_kfree; + } + } + + /* Inform the i2c layer */ + if ((err = i2c_attach_client(client))) + goto exit_kfree; + + list_add(&data->list, &x1205_clients); + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + /* If requested, set the system time */ + if (hctosys) + x1205_hctosys(client); + + return 0; + +exit_kfree: + kfree(data); + +exit: + return err; +} + +static int x1205_detach(struct i2c_client *client) +{ + int err; + struct x1205_data *data = i2c_get_clientdata(client); + + dev_dbg(&client->dev, "%s\n", __FUNCTION__); + + if ((err = i2c_detach_client(client))) + return err; + + list_del(&data->list); + + kfree(data); + + return 0; +} + +static int x1205_command(struct i2c_client *client, unsigned int cmd, + void *param) +{ + if (param == NULL) + return -EINVAL; + + if (!capable(CAP_SYS_TIME)) + return -EACCES; + + dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); + + switch (cmd) { + case X1205_CMD_GETDATETIME: + return x1205_get_datetime(client, param, X1205_CCR_BASE); + + case X1205_CMD_SETTIME: + return x1205_set_datetime(client, param, 0, + X1205_CCR_BASE); + + case X1205_CMD_SETDATETIME: + return x1205_set_datetime(client, param, 1, + X1205_CCR_BASE); + + case X1205_CMD_GETALARM: + return x1205_get_datetime(client, param, X1205_ALM0_BASE); + + case X1205_CMD_SETALARM: + return x1205_set_datetime(client, param, 1, + X1205_ALM0_BASE); + + case X1205_CMD_GETDTRIM: + return x1205_get_dtrim(client, param); + + case X1205_CMD_GETATRIM: + return x1205_get_atrim(client, param); + + default: + return -EINVAL; + } +} + +static int __init x1205_init(void) +{ + return i2c_add_driver(&x1205_driver); +} + +static void __exit x1205_exit(void) +{ + i2c_del_driver(&x1205_driver); +} + +MODULE_AUTHOR( + "Karen Spearel , " + "Alessandro Zummo "); +MODULE_DESCRIPTION("Xicor X1205 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +EXPORT_SYMBOL_GPL(x1205_do_command); +EXPORT_SYMBOL_GPL(x1205_direct_attach); + +module_init(x1205_init); +module_exit(x1205_exit); diff --git a/include/linux/x1205.h b/include/linux/x1205.h new file mode 100644 index 000000000000..64fd3af894a5 --- /dev/null +++ b/include/linux/x1205.h @@ -0,0 +1,31 @@ +/* + * x1205.h - defines for drivers/i2c/chips/x1205.c + * Copyright 2004 Karen Spearel + * Copyright 2005 Alessandro Zummo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_X1205_H__ +#define __LINUX_X1205_H__ + +/* commands */ + +#define X1205_CMD_GETDATETIME 0 +#define X1205_CMD_SETTIME 1 +#define X1205_CMD_SETDATETIME 2 +#define X1205_CMD_GETALARM 3 +#define X1205_CMD_SETALARM 4 +#define X1205_CMD_GETDTRIM 5 +#define X1205_CMD_SETDTRIM 6 +#define X1205_CMD_GETATRIM 7 +#define X1205_CMD_SETATRIM 8 + +extern int x1205_do_command(unsigned int cmd, void *arg); +extern int x1205_direct_attach(int adapter_id, + struct i2c_client_address_data *address_data); + +#endif /* __LINUX_X1205_H__ */ -- GitLab From 2286066faf51890e49ad61e2ceab683666cd9108 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 17 Oct 2005 23:07:05 +0200 Subject: [PATCH 0688/1519] [PATCH] i2c: kzalloc conversion, ixp bus drivers Use kzalloc instead of kmalloc+memzero in the ixp2000 and ixp4xx I2C bus drivers. Signed-off-by: Deepak Saxena Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-ixp2000.c | 3 +-- drivers/i2c/busses/i2c-ixp4xx.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index c3292dc743f1..42016ee6ef13 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -106,11 +106,10 @@ static int ixp2000_i2c_probe(struct device *dev) struct platform_device *plat_dev = to_platform_device(dev); struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data; struct ixp2000_i2c_data *drv_data = - kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); + kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); if (!drv_data) return -ENOMEM; - memzero(drv_data, sizeof(*drv_data)); drv_data->gpio_pins = gpio; drv_data->algo_data.data = gpio; diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 3169280c25a6..69303ab65e04 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -107,12 +107,11 @@ static int ixp4xx_i2c_probe(struct device *dev) struct platform_device *plat_dev = to_platform_device(dev); struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data; struct ixp4xx_i2c_data *drv_data = - kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); + kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); if(!drv_data) return -ENOMEM; - memzero(drv_data, sizeof(struct ixp4xx_i2c_data)); drv_data->gpio_pins = gpio; /* -- GitLab From ba9c2e8d15da029ea3051c95e446b2d638ef02e2 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 17 Oct 2005 23:08:32 +0200 Subject: [PATCH 0689/1519] [PATCH] hwmon: kzalloc conversion Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adm1021.c | 3 +-- drivers/hwmon/adm1025.c | 3 +-- drivers/hwmon/adm1026.c | 4 +--- drivers/hwmon/adm1031.c | 3 +-- drivers/hwmon/asb100.c | 11 ++++------- drivers/hwmon/atxp1.c | 3 +-- drivers/hwmon/ds1621.c | 3 +-- drivers/hwmon/fscher.c | 3 +-- drivers/hwmon/fscpos.c | 3 +-- drivers/hwmon/gl518sm.c | 3 +-- drivers/hwmon/gl520sm.c | 3 +-- drivers/hwmon/it87.c | 3 +-- drivers/hwmon/lm63.c | 3 +-- drivers/hwmon/lm75.c | 3 +-- drivers/hwmon/lm77.c | 3 +-- drivers/hwmon/lm78.c | 3 +-- drivers/hwmon/lm80.c | 3 +-- drivers/hwmon/lm83.c | 3 +-- drivers/hwmon/lm85.c | 3 +-- drivers/hwmon/lm87.c | 3 +-- drivers/hwmon/lm90.c | 3 +-- drivers/hwmon/lm92.c | 3 +-- drivers/hwmon/max1619.c | 3 +-- drivers/hwmon/pc87360.c | 3 +-- drivers/hwmon/sis5595.c | 3 +-- drivers/hwmon/smsc47b397.c | 3 +-- drivers/hwmon/smsc47m1.c | 3 +-- drivers/hwmon/via686a.c | 3 +-- drivers/hwmon/w83627ehf.c | 3 +-- drivers/hwmon/w83627hf.c | 3 +-- drivers/hwmon/w83781d.c | 10 +++------- drivers/hwmon/w83792d.c | 6 ++---- drivers/hwmon/w83l785ts.c | 4 +--- 33 files changed, 39 insertions(+), 80 deletions(-) diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 58aee3a00caa..8102876c7c3f 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -204,11 +204,10 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access adm1021_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { err = -ENOMEM; goto error0; } - memset(data, 0, sizeof(struct adm1021_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 526b7ff179eb..3ec12421694f 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -331,11 +331,10 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct adm1025_data)); /* The common I2C client data is placed right before the ADM1025-specific data. */ diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 625158110fd4..3b5814183738 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -1470,13 +1470,11 @@ int adm1026_detect(struct i2c_adapter *adapter, int address, client structure, even though we cannot fill it completely yet. But it allows us to access adm1026_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct adm1026_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct adm1026_data)); - new_client = &data->client; i2c_set_clientdata(new_client, data); new_client->addr = address; diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 58338ed7c8a1..7c545d5eee45 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -740,11 +740,10 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct adm1031_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index 8e34855a6274..52c469722a65 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -629,19 +629,17 @@ static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, int i, id, err; struct asb100_data *data = i2c_get_clientdata(new_client); - data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[0])) { err = -ENOMEM; goto ERROR_SC_0; } - memset(data->lm75[0], 0x00, sizeof(struct i2c_client)); - data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[1])) { err = -ENOMEM; goto ERROR_SC_1; } - memset(data->lm75[1], 0x00, sizeof(struct i2c_client)); id = i2c_adapter_id(adapter); @@ -724,12 +722,11 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access asb100_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) { - pr_debug("asb100.o: detect failed, kmalloc failed!\n"); + if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) { + pr_debug("asb100.o: detect failed, kzalloc failed!\n"); err = -ENOMEM; goto ERROR0; } - memset(data, 0, sizeof(struct asb100_data)); new_client = &data->client; init_MUTEX(&data->lock); diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 441324fc6b8b..53324f56404e 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -268,12 +268,11 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct atxp1_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct atxp1_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index e1ff22cf984a..c5afa0058308 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -202,11 +202,10 @@ int ds1621_detect(struct i2c_adapter *adapter, int address, /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access ds1621_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct ds1621_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c index eef6061d786b..a02e1c34c757 100644 --- a/drivers/hwmon/fscher.c +++ b/drivers/hwmon/fscher.c @@ -303,11 +303,10 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the * client structure, even though we cannot fill it completely yet. * But it allows us to access i2c_smbus_read_byte_data. */ - if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct fscher_data)); /* The common I2C client data is placed right before the * Hermes-specific data. */ diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index 5fc77a5fed07..a378e4f5c93b 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -453,11 +453,10 @@ int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) * But it allows us to access fscpos_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct fscpos_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 256b9323c84b..2f178dbe3d87 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -365,11 +365,10 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access gl518_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct gl518_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index 12fd757066fc..c39ba1239426 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -536,11 +536,10 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access gl520_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct gl520_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 55e1c835a046..9a5b8b268397 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -761,11 +761,10 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access it87_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } - memset(data, 0, sizeof(struct it87_data)); new_client = &data->client; if (is_isa) diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index be5c7095ecbb..954ec2497249 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -375,11 +375,10 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm63_data)); /* The common I2C client data is placed right before the LM63-specific data. */ diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 9a3ebdf583f4..d70f4c8fc1e6 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -127,11 +127,10 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access lm75_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm75_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index 866eab96a6f6..9380fda7dcd1 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -226,11 +226,10 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access lm77_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm77_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm77_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index d697a554286f..924462362743 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -540,11 +540,10 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access lm78_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } - memset(data, 0, sizeof(struct lm78_data)); new_client = &data->client; if (is_isa) diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index 83af8b3a0cac..b4cd6c661f11 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -407,11 +407,10 @@ int lm80_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access lm80_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm80_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index d74b2c20c719..9a70611a9f69 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -230,11 +230,10 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm83_data)); /* The common I2C client data is placed right after the * LM83-specific data. */ diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index ab214df9624b..d5537a5377f7 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1033,11 +1033,10 @@ int lm85_detect(struct i2c_adapter *adapter, int address, client structure, even though we cannot fill it completely yet. But it allows us to access lm85_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm85_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR0; } - memset(data, 0, sizeof(struct lm85_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index dca996de4c33..eeec18177861 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -554,11 +554,10 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm87_data)); /* The common I2C client data is placed right before the LM87-specific data. */ diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 14de05fcd431..dad0f1074956 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -370,11 +370,10 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm90_data)); /* The common I2C client data is placed right before the LM90-specific data. */ diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index 647b7c7cd575..7a4b3701ed1a 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -300,11 +300,10 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) | I2C_FUNC_SMBUS_WORD_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct lm92_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct lm92_data)); /* Fill in enough client fields so that we can read from the chip, which is required for identication */ diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 16bf71f3a04d..6a82ffae1bfd 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -197,11 +197,10 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct max1619_data)); /* The common I2C client data is placed right before the MAX1619-specific data. */ diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index cf2a35799c7c..17f745a23d04 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -754,9 +754,8 @@ static int pc87360_detect(struct i2c_adapter *adapter) const char *name = "pc87360"; int use_thermistors = 0; - if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL))) + if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL))) return -ENOMEM; - memset(data, 0x00, sizeof(struct pc87360_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 21aa9a41f62c..9c6cadec1087 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -518,11 +518,10 @@ static int sis5595_detect(struct i2c_adapter *adapter) goto exit_release; } - if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct sis5595_data), GFP_KERNEL))) { err = -ENOMEM; goto exit_release; } - memset(data, 0, sizeof(struct sis5595_data)); new_client = &data->client; new_client->addr = address; diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index 37ed8b33f01a..2a3e21b5b6b4 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -244,11 +244,10 @@ static int smsc47b397_detect(struct i2c_adapter *adapter) return -EBUSY; } - if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) { err = -ENOMEM; goto error_release; } - memset(data, 0x00, sizeof(struct smsc47b397_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index c9cc683eba4a..bbe93a0688ec 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -396,11 +396,10 @@ static int smsc47m1_detect(struct i2c_adapter *adapter) return -EBUSY; } - if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { err = -ENOMEM; goto error_release; } - memset(data, 0x00, sizeof(struct smsc47m1_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index c6e64f4abdea..6f696f897176 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -621,11 +621,10 @@ static int via686a_detect(struct i2c_adapter *adapter) return -ENODEV; } - if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL))) { err = -ENOMEM; goto exit_release; } - memset(data, 0, sizeof(struct via686a_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 685eeb766809..eee22a57e929 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -681,11 +681,10 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) goto exit; } - if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) { err = -ENOMEM; goto exit_release; } - memset(data, 0, sizeof(struct w83627ehf_data)); client = &data->client; i2c_set_clientdata(client, data); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 48270819ff99..70ef926c3bd8 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1045,11 +1045,10 @@ static int w83627hf_detect(struct i2c_adapter *adapter) client structure, even though we cannot fill it completely yet. But it allows us to access w83627hf_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } - memset(data, 0, sizeof(struct w83627hf_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 26b1fac7c619..9265f32122fa 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -889,12 +889,11 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, const char *client_name = ""; struct w83781d_data *data = i2c_get_clientdata(new_client); - data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[0])) { err = -ENOMEM; goto ERROR_SC_0; } - memset(data->lm75[0], 0x00, sizeof (struct i2c_client)); id = i2c_adapter_id(adapter); @@ -919,13 +918,11 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, } if (kind != w83783s) { - - data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[1])) { err = -ENOMEM; goto ERROR_SC_1; } - memset(data->lm75[1], 0x0, sizeof(struct i2c_client)); if (force_subclients[0] == id && force_subclients[1] == address) { @@ -1064,11 +1061,10 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access w83781d_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR1; } - memset(data, 0, sizeof(struct w83781d_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 7bbd1888ce94..4be59dbb78c4 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -1086,11 +1086,10 @@ w83792d_create_subclient(struct i2c_adapter *adapter, int err; struct i2c_client *sub_client; - (*sub_cli) = sub_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + (*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(sub_client)) { return -ENOMEM; } - memset(sub_client, 0x00, sizeof(struct i2c_client)); sub_client->addr = 0x48 + addr; i2c_set_clientdata(sub_client, NULL); sub_client->adapter = adapter; @@ -1184,11 +1183,10 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) client structure, even though we cannot fill it completely yet. But it allows us to access w83792d_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct w83792d_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR0; } - memset(data, 0, sizeof(struct w83792d_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index db12a620b331..f495b6378668 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -156,12 +156,10 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; - if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct w83l785ts_data)); - /* The common I2C client data is placed right before the * W83L785TS-specific data. */ -- GitLab From 5263ebb51eb098b01caf229498c954999117e4a7 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 17 Oct 2005 23:09:43 +0200 Subject: [PATCH 0690/1519] [PATCH] i2c: kzalloc conversion, other drivers Use kzalloc instead of kmalloc+memset in all remaining i2c bus and chip drivers. Signed-off-by: Deepak Saxena Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-amd8111.c | 3 +-- drivers/i2c/busses/i2c-ibm_iic.c | 3 +-- drivers/i2c/busses/i2c-iop3xx.c | 6 ++---- drivers/i2c/busses/i2c-keywest.c | 3 +-- drivers/i2c/busses/i2c-mpc.c | 3 +-- drivers/i2c/busses/i2c-mv64xxx.c | 5 +---- drivers/i2c/busses/i2c-nforce2.c | 3 +-- drivers/i2c/busses/i2c-parport.c | 5 ++--- drivers/i2c/busses/i2c-pmac-smu.c | 3 +-- drivers/i2c/busses/i2c-prosavage.c | 4 +--- drivers/i2c/busses/scx200_acb.c | 3 +-- drivers/i2c/chips/ds1337.c | 3 +-- drivers/i2c/chips/ds1374.c | 3 +-- drivers/i2c/chips/eeprom.c | 3 +-- drivers/i2c/chips/m41t00.c | 3 +-- drivers/i2c/chips/max6875.c | 6 ++---- drivers/i2c/chips/pca9539.c | 3 +-- drivers/i2c/chips/pcf8574.c | 3 +-- drivers/i2c/chips/pcf8591.c | 3 +-- drivers/i2c/chips/rtc8564.c | 3 +-- drivers/i2c/chips/tps65010.c | 3 +-- drivers/i2c/i2c-dev.c | 3 +-- 22 files changed, 25 insertions(+), 52 deletions(-) diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 0d29e78dff63..aface7938a5b 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -344,10 +344,9 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) return -ENODEV; - smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL); + smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL); if (!smbus) return -ENOMEM; - memset(smbus, 0, sizeof(struct amd_smbus)); smbus->dev = dev; smbus->base = pci_resource_start(dev, 0); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index a3ed9590f028..1a587253d716 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -672,13 +672,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){ printk(KERN_WARNING"ibm-iic%d: missing additional data!\n", ocp->def->index); - if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){ + if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) { printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n", ocp->def->index); return -ENOMEM; } - memset(dev, 0, sizeof(*dev)); dev->idx = ocp->def->index; ocp_set_drvdata(ocp, dev); diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 0f7dfd8f4546..9888fae1f37a 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -440,19 +440,17 @@ iop3xx_i2c_probe(struct device *dev) struct i2c_adapter *new_adapter; struct i2c_algo_iop3xx_data *adapter_data; - new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); if (!new_adapter) { ret = -ENOMEM; goto out; } - memset((void*)new_adapter, 0, sizeof(*new_adapter)); - adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); + adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); if (!adapter_data) { ret = -ENOMEM; goto free_adapter; } - memset((void*)adapter_data, 0, sizeof(*adapter_data)); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index 34e43c8d8d5e..ef281e0c567b 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -535,13 +535,12 @@ create_iface(struct device_node *np, struct device *dev) tsize = sizeof(struct keywest_iface) + (sizeof(struct keywest_chan) + 4) * nchan; - iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL); + iface = (struct keywest_iface *) kzalloc(tsize, GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n"); pmac_low_i2c_unlock(np); return -ENOMEM; } - memset(iface, 0, tsize); spin_lock_init(&iface->lock); init_completion(&iface->complete); iface->node = of_node_get(np); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index b81c54620030..8491633005b8 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -296,10 +296,9 @@ static int fsl_i2c_probe(struct device *device) pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; - if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) { + if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) { return -ENOMEM; } - memset(i2c, 0, sizeof(*i2c)); i2c->irq = platform_get_irq(pdev, 0); i2c->flags = pdata->device_flags; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 69709ee0b896..d0d2a6f1386e 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -500,13 +500,10 @@ mv64xxx_i2c_probe(struct device *dev) if ((pd->id != 0) || !pdata) return -ENODEV; - drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); - + drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); if (!drv_data) return -ENOMEM; - memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data)); - if (mv64xxx_i2c_map_regs(pd, drv_data)) { rc = -ENODEV; goto exit_kfree; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 5dc62114cc8d..87b6e26aa8a0 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -313,10 +313,9 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ int res1, res2; /* we support 2 SMBus adapters */ - if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus), + if (!(smbuses = (void *)kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL))) return -ENOMEM; - memset (smbuses, 0, 2*sizeof(struct nforce2_smbus)); pci_set_drvdata(dev, smbuses); /* SMBus adapter 1 */ diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index fa506187fbe1..2854d858fc9b 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -155,12 +155,11 @@ static void i2c_parport_attach (struct parport *port) { struct i2c_par *adapter; - adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL); + adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL); if (adapter == NULL) { - printk(KERN_ERR "i2c-parport: Failed to kmalloc\n"); + printk(KERN_ERR "i2c-parport: Failed to kzalloc\n"); return; } - memset(adapter, 0x00, sizeof(struct i2c_par)); pr_debug("i2c-parport: attaching to %s\n", port->name); adapter->pdev = parport_register_device(port, "i2c-parport", diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c index 8a9f5648a23d..bfefe7f7a53d 100644 --- a/drivers/i2c/busses/i2c-pmac-smu.c +++ b/drivers/i2c/busses/i2c-pmac-smu.c @@ -211,12 +211,11 @@ static int create_iface(struct device_node *np, struct device *dev) } busid = *reg; - iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL); + iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n"); return -ENOMEM; } - memset(iface, 0, sizeof(struct smu_iface)); init_completion(&iface->complete); iface->busid = busid; diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 92b744273577..42f8b5ce3bf8 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -241,14 +241,12 @@ static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_devic struct s_i2c_chip *chip; struct s_i2c_bus *bus; - pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); + pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); chip = (struct s_i2c_chip *)pci_get_drvdata(dev); if (chip == NULL) { return -ENOMEM; } - memset(chip, 0, sizeof(struct s_i2c_chip)); - base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK; len = dev->resource[0].end - base + 1; chip->mmio = ioremap_nocache(base, len); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index a1d580e05361..d3478e084522 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -442,14 +442,13 @@ static int __init scx200_acb_create(int base, int index) int rc = 0; char description[64]; - iface = kmalloc(sizeof(*iface), GFP_KERNEL); + iface = kzalloc(sizeof(*iface), GFP_KERNEL); if (!iface) { printk(KERN_ERR NAME ": can't allocate memory\n"); rc = -ENOMEM; goto errout; } - memset(iface, 0, sizeof(*iface)); adapter = &iface->adapter; i2c_set_adapdata(adapter, iface); snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index); diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c index 9d3175c03395..01b037007410 100644 --- a/drivers/i2c/chips/ds1337.c +++ b/drivers/i2c/chips/ds1337.c @@ -243,11 +243,10 @@ static int ds1337_detect(struct i2c_adapter *adapter, int address, int kind) I2C_FUNC_I2C)) goto exit; - if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct ds1337_data)); INIT_LIST_HEAD(&data->list); /* The common I2C client data is placed right before the diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index ec640e9f085a..1596e6478782 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -193,11 +193,10 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind) struct i2c_client *client; int rc; - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!client) return -ENOMEM; - memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE); client->addr = addr; client->adapter = adap; diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index 7fb739c43935..ee7cbc823fd1 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -171,11 +171,10 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) | I2C_FUNC_SMBUS_BYTE)) goto exit; - if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct eeprom_data)); new_client = &data->client; memset(data->data, 0xff, EEPROM_SIZE); diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c index 554f7ba61627..3df309ae44a6 100644 --- a/drivers/i2c/chips/m41t00.c +++ b/drivers/i2c/chips/m41t00.c @@ -174,11 +174,10 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind) struct i2c_client *client; int rc; - client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!client) return -ENOMEM; - memset(client, 0, sizeof(struct i2c_client)); strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE); client->addr = addr; client->adapter = adap; diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index 9e1aeb69abf9..b376a006883c 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -179,16 +179,14 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) if (address & 1) return 0; - if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL))) + if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL))) return -ENOMEM; - memset(data, 0, sizeof(struct max6875_data)); /* A fake client is created on the odd address */ - if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) { + if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { err = -ENOMEM; goto exit_kfree1; } - memset(fake_client, 0, sizeof(struct i2c_client)); /* Init real i2c_client */ real_client = &data->client; diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c index 225577fdda4d..59a930346229 100644 --- a/drivers/i2c/chips/pca9539.c +++ b/drivers/i2c/chips/pca9539.c @@ -122,11 +122,10 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pca9539_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pca9539_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index 6525743ff9fd..2c2555d46fdf 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -127,11 +127,10 @@ int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pcf8574_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index 80f1df9a4500..3c815b153249 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -178,11 +178,10 @@ int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. */ - if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - memset(data, 0, sizeof(struct pcf8591_data)); new_client = &data->client; i2c_set_clientdata(new_client, data); diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c index dd9d42d7b6e7..916cdc1af23c 100644 --- a/drivers/i2c/chips/rtc8564.c +++ b/drivers/i2c/chips/rtc8564.c @@ -148,12 +148,11 @@ static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind) {addr, I2C_M_RD, 2, data} }; - d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL); + d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL); if (!d) { ret = -ENOMEM; goto done; } - memset(d, 0, sizeof(struct rtc8564_data)); new_client = &d->client; strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE); diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index 280e9638c0f8..280dd7a45db6 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -500,11 +500,10 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) return 0; } - tps = kmalloc(sizeof *tps, GFP_KERNEL); + tps = kzalloc(sizeof *tps, GFP_KERNEL); if (!tps) return 0; - memset(tps, 0, sizeof *tps); init_MUTEX(&tps->lock); INIT_WORK(&tps->work, tps65010_work, tps); tps->irq = -1; diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 89f54a5e8484..276ec42a0717 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -80,10 +80,9 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap) { struct i2c_dev *i2c_dev; - i2c_dev = kmalloc(sizeof(*i2c_dev), GFP_KERNEL); + i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL); if (!i2c_dev) return ERR_PTR(-ENOMEM); - memset(i2c_dev, 0x00, sizeof(*i2c_dev)); spin_lock(&i2c_dev_array_lock); if (i2c_dev_array[adap->nr]) { -- GitLab From 078d9fe4fe8dada13e37d2e2790b0ad780324097 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 17 Oct 2005 23:12:36 +0200 Subject: [PATCH 0691/1519] [PATCH] i2c: kzalloc cleanups, 1 of 2 Drop useless casts on kzalloc returned values, as suggested by Jiri Slaby. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-keywest.c | 2 +- drivers/i2c/busses/i2c-nforce2.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index ef281e0c567b..d61f748278fc 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -535,7 +535,7 @@ create_iface(struct device_node *np, struct device *dev) tsize = sizeof(struct keywest_iface) + (sizeof(struct keywest_chan) + 4) * nchan; - iface = (struct keywest_iface *) kzalloc(tsize, GFP_KERNEL); + iface = kzalloc(tsize, GFP_KERNEL); if (iface == NULL) { printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n"); pmac_low_i2c_unlock(np); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 87b6e26aa8a0..9b4247610815 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -313,8 +313,7 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ int res1, res2; /* we support 2 SMBus adapters */ - if (!(smbuses = (void *)kzalloc(2*sizeof(struct nforce2_smbus), - GFP_KERNEL))) + if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL))) return -ENOMEM; pci_set_drvdata(dev, smbuses); -- GitLab From deb875c7ff2ef417a2daff41ee4b357098b7ab10 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 17 Oct 2005 23:14:31 +0200 Subject: [PATCH 0692/1519] [PATCH] i2c: kzalloc cleanups, 2 of 2 Use kzalloc instead of kmalloc in the S4882 SMBus multiplexing driver. I guess it's safer that way. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-amd756-s4882.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 4e553e8c5cba..f51ab652300a 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -169,12 +169,12 @@ static int __init amd756_s4882_init(void) init_MUTEX(&amd756_lock); /* Define the 5 virtual adapters and algorithms structures */ - if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter), + if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL))) { error = -ENOMEM; goto ERROR1; } - if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm), + if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL))) { error = -ENOMEM; goto ERROR2; -- GitLab From 2445eb62e98250f1ec8cbc8cf7c4be9cfafe88e5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 17 Oct 2005 23:16:25 +0200 Subject: [PATCH 0693/1519] [PATCH] i2c: Documentation update Update the i2c documentation: kzalloc should be used instead of kmalloc. I also fixed a couple other things nearby in writing-clients, as several past changes had never been reported there. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/porting-clients | 2 +- Documentation/i2c/writing-clients | 16 +++++----------- 2 files changed, 6 insertions(+), 12 deletions(-) diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients index 4849dfd6961c..184fac2377aa 100644 --- a/Documentation/i2c/porting-clients +++ b/Documentation/i2c/porting-clients @@ -82,7 +82,7 @@ Technical changes: exit and exit_free. For i2c+isa drivers, labels should be named ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before jumping to error labels. By the way, labels should be left-aligned. - Use memset to fill the client and data area with 0x00. + Use kzalloc instead of kmalloc. Use i2c_set_clientdata to set the client data (as opposed to a direct access to client->data). Use strlcpy instead of strcpy to copy the client name. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 1882811c7f5d..e94d9c6cc522 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -55,6 +55,7 @@ be very useful. An example structure is below. struct foo_data { + struct i2c_client client; struct semaphore lock; /* For ISA access in `sensors' drivers. */ int sysctl_id; /* To keep the /proc directory entry for `sensors' drivers. */ @@ -307,22 +308,15 @@ For now, you can ignore the `flags' parameter. It is there for future use. client structure, even though we cannot fill it completely yet. But it allows us to access several i2c functions safely */ - /* Note that we reserve some space for foo_data too. If you don't - need it, remove it. We do it here to help to lessen memory - fragmentation. */ - if (! (new_client = kmalloc(sizeof(struct i2c_client) + - sizeof(struct foo_data), - GFP_KERNEL))) { + if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) { err = -ENOMEM; goto ERROR0; } - /* This is tricky, but it will set the data to the right value. */ - client->data = new_client + 1; - data = (struct foo_data *) (client->data); + new_client = &data->client; + i2c_set_clientdata(new_client, data); new_client->addr = address; - new_client->data = data; new_client->adapter = adapter; new_client->driver = &foo_driver; new_client->flags = 0; @@ -448,7 +442,7 @@ much simpler than the attachment code, fortunately! release_region(client->addr,LM78_EXTENT); /* HYBRID SENSORS CHIP ONLY END */ - kfree(client); /* Frees client data too, if allocated at the same time */ + kfree(data); return 0; } -- GitLab From 6536c49a1ee2bd85eee0e7fa41e67c5743f2f93e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 26 Oct 2005 21:04:12 +0200 Subject: [PATCH 0694/1519] [PATCH] i2c: Static function fixes, 1 of 4 eeprom_detect is first declared static and then when the function is actually implemented, there is no static. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index ee7cbc823fd1..4baf573fa04f 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -155,7 +155,7 @@ static int eeprom_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) +static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct eeprom_data *data; -- GitLab From d8d2061590c87c20bf78133461bc74df78803ecb Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 26 Oct 2005 21:05:46 +0200 Subject: [PATCH 0695/1519] [PATCH] hwmon: Static function fixes, 2 of 4 lm78.c and lm85.c have a number of items declared static then implemented without the static on them. The following patch fixes these sparse errors. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/lm78.c | 2 +- drivers/hwmon/lm85.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index 924462362743..bde0cda9477e 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -480,7 +480,7 @@ static int lm78_isa_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int lm78_detect(struct i2c_adapter *adapter, int address, int kind) +static int lm78_detect(struct i2c_adapter *adapter, int address, int kind) { int i, err; struct i2c_client *new_client; diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index d5537a5377f7..d1070ed2bee6 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1007,14 +1007,14 @@ temp_auto(1); temp_auto(2); temp_auto(3); -int lm85_attach_adapter(struct i2c_adapter *adapter) +static int lm85_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; return i2c_probe(adapter, &addr_data, lm85_detect); } -int lm85_detect(struct i2c_adapter *adapter, int address, +static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { int company, verstep ; @@ -1235,7 +1235,7 @@ int lm85_detect(struct i2c_adapter *adapter, int address, return err; } -int lm85_detach_client(struct i2c_client *client) +static int lm85_detach_client(struct i2c_client *client) { struct lm85_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->class_dev); @@ -1245,7 +1245,7 @@ int lm85_detach_client(struct i2c_client *client) } -int lm85_read_value(struct i2c_client *client, u8 reg) +static int lm85_read_value(struct i2c_client *client, u8 reg) { int res; @@ -1275,7 +1275,7 @@ int lm85_read_value(struct i2c_client *client, u8 reg) return res ; } -int lm85_write_value(struct i2c_client *client, u8 reg, int value) +static int lm85_write_value(struct i2c_client *client, u8 reg, int value) { int res ; @@ -1304,7 +1304,7 @@ int lm85_write_value(struct i2c_client *client, u8 reg, int value) return res ; } -void lm85_init_client(struct i2c_client *client) +static void lm85_init_client(struct i2c_client *client) { int value; struct lm85_data *data = i2c_get_clientdata(client); -- GitLab From c49efceffa599299ab3f38b1cdf8c2f1bf9811c4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 26 Oct 2005 21:07:25 +0200 Subject: [PATCH 0696/1519] [PATCH] hwmon: Static function fixes, 3 of 4 Fixup functions that have been declared static and then actually defined without the static on. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/adm1026.c | 18 +++++++++--------- drivers/hwmon/ds1621.c | 4 ++-- drivers/hwmon/fscpos.c | 2 +- drivers/hwmon/it87.c | 2 +- drivers/hwmon/lm80.c | 2 +- 5 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 3b5814183738..e0f56549d1d8 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -315,7 +315,7 @@ static struct i2c_driver adm1026_driver = { .detach_client = adm1026_detach_client, }; -int adm1026_attach_adapter(struct i2c_adapter *adapter) +static int adm1026_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) { return 0; @@ -323,7 +323,7 @@ int adm1026_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, adm1026_detect); } -int adm1026_detach_client(struct i2c_client *client) +static int adm1026_detach_client(struct i2c_client *client) { struct adm1026_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->class_dev); @@ -332,7 +332,7 @@ int adm1026_detach_client(struct i2c_client *client) return 0; } -int adm1026_read_value(struct i2c_client *client, u8 reg) +static int adm1026_read_value(struct i2c_client *client, u8 reg) { int res; @@ -346,7 +346,7 @@ int adm1026_read_value(struct i2c_client *client, u8 reg) return res; } -int adm1026_write_value(struct i2c_client *client, u8 reg, int value) +static int adm1026_write_value(struct i2c_client *client, u8 reg, int value) { int res; @@ -360,7 +360,7 @@ int adm1026_write_value(struct i2c_client *client, u8 reg, int value) return res; } -void adm1026_init_client(struct i2c_client *client) +static void adm1026_init_client(struct i2c_client *client) { int value, i; struct adm1026_data *data = i2c_get_clientdata(client); @@ -460,7 +460,7 @@ void adm1026_init_client(struct i2c_client *client) } } -void adm1026_print_gpio(struct i2c_client *client) +static void adm1026_print_gpio(struct i2c_client *client) { struct adm1026_data *data = i2c_get_clientdata(client); int i; @@ -492,7 +492,7 @@ void adm1026_print_gpio(struct i2c_client *client) } } -void adm1026_fixup_gpio(struct i2c_client *client) +static void adm1026_fixup_gpio(struct i2c_client *client) { struct adm1026_data *data = i2c_get_clientdata(client); int i; @@ -1452,8 +1452,8 @@ static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); -int adm1026_detect(struct i2c_adapter *adapter, int address, - int kind) +static int adm1026_detect(struct i2c_adapter *adapter, int address, + int kind) { int company, verstep; struct i2c_client *new_client; diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index c5afa0058308..34f71b7c7f37 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -186,8 +186,8 @@ static int ds1621_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind) +static int ds1621_detect(struct i2c_adapter *adapter, int address, + int kind) { int conf, temp; struct i2c_client *new_client; diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index a378e4f5c93b..64e4edc64f8d 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -438,7 +438,7 @@ static int fscpos_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, fscpos_detect); } -int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) +static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct fscpos_data *data; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 9a5b8b268397..6c41e25e670b 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -738,7 +738,7 @@ static int __init it87_find(unsigned short *address) } /* This function is called by i2c_probe */ -int it87_detect(struct i2c_adapter *adapter, int address, int kind) +static int it87_detect(struct i2c_adapter *adapter, int address, int kind) { int i; struct i2c_client *new_client; diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index b4cd6c661f11..c359fdea211e 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -393,7 +393,7 @@ static int lm80_attach_adapter(struct i2c_adapter *adapter) return i2c_probe(adapter, &addr_data, lm80_detect); } -int lm80_detect(struct i2c_adapter *adapter, int address, int kind) +static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) { int i, cur; struct i2c_client *new_client; -- GitLab From 6344a8ece0bacccf61817450e8ccf78c973fc0c5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 26 Oct 2005 21:09:41 +0200 Subject: [PATCH 0697/1519] [PATCH] i2c: Static function fixes, 4 of 4 Fix functions declared static and then implemented without the static in drivers/i2c/chips. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/ds1374.c | 3 ++- drivers/i2c/chips/pcf8574.c | 2 +- drivers/i2c/chips/pcf8591.c | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index 1596e6478782..da488b735abf 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -167,7 +167,8 @@ static void ds1374_set_tlet(ulong arg) static ulong new_time; -DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time); +static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, + (ulong) & new_time); int ds1374_set_rtc_time(ulong nowtime) { diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index 2c2555d46fdf..c323c2de236c 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -115,7 +115,7 @@ static int pcf8574_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) +static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct pcf8574_data *data; diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index 3c815b153249..ce420a67560b 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -166,7 +166,7 @@ static int pcf8591_attach_adapter(struct i2c_adapter *adapter) } /* This function is called by i2c_probe */ -int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) +static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct pcf8591_data *data; -- GitLab From cd19cc4732395eb3dbaf49042233b5ac69b1fbd3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:14:16 +0200 Subject: [PATCH 0698/1519] [PATCH] i2c: ID redefinition cleanups Fix several redefinitions of i2c IDs. i2c IDs must not be defined outside of i2c-id.h. Signed-off-by: Jean Delvare Signed-off-by: Henk Vergonet Acked-by: Mark McClelland Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-prosavage.c | 5 ----- include/media/ovcamchip.h | 14 -------------- 2 files changed, 19 deletions(-) diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 42f8b5ce3bf8..42cb1d8ca659 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -83,11 +83,6 @@ struct s_i2c_chip { /* * i2c configuration */ -#ifndef I2C_HW_B_S3VIA -#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */ -#endif - -/* delays */ #define CYCLE_DELAY 10 #define TIMEOUT (HZ / 2) diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h index cb7c0aa96f22..8138983adced 100644 --- a/include/media/ovcamchip.h +++ b/include/media/ovcamchip.h @@ -17,20 +17,6 @@ #include #include -/* Remove these once they are officially defined */ -#ifndef I2C_DRIVERID_OVCAMCHIP - #define I2C_DRIVERID_OVCAMCHIP 0xf00f -#endif -#ifndef I2C_HW_SMBUS_OV511 - #define I2C_HW_SMBUS_OV511 0xfe -#endif -#ifndef I2C_HW_SMBUS_OV518 - #define I2C_HW_SMBUS_OV518 0xff -#endif -#ifndef I2C_HW_SMBUS_OVFX2 - #define I2C_HW_SMBUS_OVFX2 0xfd -#endif - /* --------------------------------- */ /* ENUMERATIONS */ /* --------------------------------- */ -- GitLab From eb00a28ae1a8fc4b3914f94ab1944396b8dda9fc Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:20:17 +0200 Subject: [PATCH 0699/1519] [PATCH] i2c: Drop unused parport i2c IDs Drop unused i2c-over-parallel-port i2c IDs: * I2C_HW_B_LPC was never actually used as far as I could search. * I2C_HW_B_ELV and I2C_HW_B_VELLE are no more used since the introduction of the unified i2c-parport driver in Linux 2.6.2. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- include/linux/i2c-id.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 44f30876a1c9..1ce4b54caa21 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -164,10 +164,7 @@ /* --- Bit algorithm adapters */ #define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ -#define I2C_HW_B_LPC 0x010001 /* Parallel port control reg. */ #define I2C_HW_B_SER 0x010002 /* Serial line interface */ -#define I2C_HW_B_ELV 0x010003 /* ELV Card */ -#define I2C_HW_B_VELLE 0x010004 /* Vellemann K8000 */ #define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ #define I2C_HW_B_WNV 0x010006 /* Winnov Videums */ #define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */ -- GitLab From 142078f6f09986c2b8f5ebe215ce405438080317 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:21:50 +0200 Subject: [PATCH 0700/1519] [PATCH] i2c: i2c-i810 documentation update Update the documented list of devices supported by the i2c-i810 driver. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/i2c/busses/i2c-i810 | 1 + drivers/i2c/busses/Kconfig | 3 ++- drivers/i2c/busses/i2c-i810.c | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810 index 0544eb332887..83c3b9743c3c 100644 --- a/Documentation/i2c/busses/i2c-i810 +++ b/Documentation/i2c/busses/i2c-i810 @@ -2,6 +2,7 @@ Kernel driver i2c-i810 Supported adapters: * Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH) + * Intel 82845G (GMCH) Authors: Frodo Looijaard , diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3badfec75b1c..4010fe92e72b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -135,11 +135,12 @@ config I2C_I810 help If you say yes to this option, support will be included for the Intel 810/815 family of mainboard I2C interfaces. Specifically, the - following versions of the chipset is supported: + following versions of the chipset are supported: i810AA i810AB i810E i815 + i845G This driver can also be built as a module. If so, the module will be called i2c-i810. diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 1b3393b7c461..52bc30593bd7 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -32,6 +32,7 @@ i810AB 7123 i810E 7125 i815 1132 + i845G 2562 */ #include -- GitLab From b8095544bc27044a7aa79e1e073b781a249910c3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:25:04 +0200 Subject: [PATCH 0701/1519] [PATCH] i2c: SMBus PEC support rewrite, 1 of 3 Discard I2C_FUNC_SMBUS_*_PEC defines. i2c clients are not supposed to check for PEC support of i2c bus drivers on individual SMBus transactions, and i2c bus drivers are not supposed to advertise them. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-i801.c | 3 +-- include/linux/i2c.h | 18 ------------------ 2 files changed, 1 insertion(+), 20 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index e90b6c4e7da3..b05e045f770c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -513,8 +513,7 @@ static u32 i801_func(struct i2c_adapter *adapter) return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK - | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC | - I2C_FUNC_SMBUS_HWPEC_CALC : 0); + | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0); } static struct i2c_algorithm smbus_algorithm = { diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 64c13c042f9d..bcd4bb1b450c 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -389,10 +389,6 @@ struct i2c_msg { #define I2C_FUNC_10BIT_ADDR 0x00000002 #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ #define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_READ_WORD_DATA_PEC 0x00000800 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC 0x00001000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_PROC_CALL_PEC 0x00002000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL_PEC 0x00004000 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_QUICK 0x00010000 #define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 @@ -408,8 +404,6 @@ struct i2c_msg { #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ #define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */ -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC 0x40000000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC 0x80000000 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ I2C_FUNC_SMBUS_WRITE_BYTE) @@ -423,17 +417,6 @@ struct i2c_msg { I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) #define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2) -#define I2C_FUNC_SMBUS_BLOCK_DATA_PEC (I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC) -#define I2C_FUNC_SMBUS_WORD_DATA_PEC (I2C_FUNC_SMBUS_READ_WORD_DATA_PEC | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC) - -#define I2C_FUNC_SMBUS_READ_BYTE_PEC I2C_FUNC_SMBUS_READ_BYTE_DATA -#define I2C_FUNC_SMBUS_WRITE_BYTE_PEC I2C_FUNC_SMBUS_WRITE_BYTE_DATA -#define I2C_FUNC_SMBUS_READ_BYTE_DATA_PEC I2C_FUNC_SMBUS_READ_WORD_DATA -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA_PEC I2C_FUNC_SMBUS_WRITE_WORD_DATA -#define I2C_FUNC_SMBUS_BYTE_PEC I2C_FUNC_SMBUS_BYTE_DATA -#define I2C_FUNC_SMBUS_BYTE_DATA_PEC I2C_FUNC_SMBUS_WORD_DATA #define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ I2C_FUNC_SMBUS_BYTE | \ @@ -441,7 +424,6 @@ struct i2c_msg { I2C_FUNC_SMBUS_WORD_DATA | \ I2C_FUNC_SMBUS_PROC_CALL | \ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC | \ I2C_FUNC_SMBUS_I2C_BLOCK) /* -- GitLab From 421ef47be20c5454b12ae0ec918d5073a9d2b938 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:28:55 +0200 Subject: [PATCH 0702/1519] [PATCH] i2c: SMBus PEC support rewrite, 2 of 3 This is my rewrite of the SMBus PEC support. The original implementation was known to have bugs (credits go to Hideki Iwamoto for reporting many of them recently), and was incomplete due to a conceptual limitation. The rewrite affects only software PEC. Hardware PEC needs very little code and is mostly untouched. Technically, both implementations differ in that the original one was emulating PEC in software by modifying the contents of an i2c_smbus_data union (changing the transaction to a different type), while the new one works one level lower, on i2c_msg structures (working on message contents). Due to the definition of the i2c_smbus_data union, not all SMBus transactions could be handled (at least not without changing the definition of this union, which would break user-space compatibility), and those which could had to be implemented individually. At the opposite, adding PEC to an i2c_msg structure can be done on any SMBus transaction with common code. Advantages of the new implementation: * It's about twice as small (from ~136 lines before to ~70 now, only counting i2c-core, including blank and comment lines). The memory used by i2c-core is down by ~640 bytes (~3.5%). * Easier to validate, less tricky code. The code being common to all transactions by design, the risk that a bug can stay uncovered is lower. * All SMBus transactions have PEC support in I2C emulation mode (providing the non-PEC transaction is also implemented). Transactions which have no emulation code right now will get PEC support for free when they finally get implemented. * Allows for code simplifications in header files and bus drivers (patch follows). Drawbacks (I guess there had to be at least one): * PEC emulation for non-PEC capable non-I2C SMBus masters was dropped. It was based on SMBus tricks and doesn't quite fit in the new design. I don't think it's really a problem, as the benefit was certainly not worth the additional complexity, but it's only fair that I at least mention it. Lastly, let's note that the new implementation does slightly affect compatibility (both in kernel and user-space), but doesn't actually break it. Some defines will be dropped, but the code can always be changed in a way that will work with both the old and the new implementations. It shouldn't be a problem as there doesn't seem to be many users of SMBus PEC to date anyway. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-core.c | 162 ++++++++++++----------------------------- include/linux/i2c.h | 2 +- 2 files changed, 49 insertions(+), 115 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 0040981b6698..02e335a04f09 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -19,7 +19,8 @@ /* With some changes from Kyösti Mälkki . All SMBus-related things are written by Frodo Looijaard - SMBus 2.0 support by Mark Studebaker */ + SMBus 2.0 support by Mark Studebaker and + Jean Delvare */ #include #include @@ -830,101 +831,44 @@ crc8(u16 data) return (u8)(data >> 8); } -/* CRC over count bytes in the first array plus the bytes in the rest - array if it is non-null. rest[0] is the (length of rest) - 1 - and is included. */ -static u8 i2c_smbus_partial_pec(u8 crc, int count, u8 *first, u8 *rest) +/* Incremental CRC8 over count bytes in the array pointed to by p */ +static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count) { int i; for(i = 0; i < count; i++) - crc = crc8((crc ^ first[i]) << 8); - if(rest != NULL) - for(i = 0; i <= rest[0]; i++) - crc = crc8((crc ^ rest[i]) << 8); + crc = crc8((crc ^ p[i]) << 8); return crc; } -static u8 i2c_smbus_pec(int count, u8 *first, u8 *rest) +/* Assume a 7-bit address, which is reasonable for SMBus */ +static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg) { - return i2c_smbus_partial_pec(0, count, first, rest); + /* The address will be sent first */ + u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD); + pec = i2c_smbus_pec(pec, &addr, 1); + + /* The data buffer follows */ + return i2c_smbus_pec(pec, msg->buf, msg->len); } -/* Returns new "size" (transaction type) - Note that we convert byte to byte_data and byte_data to word_data - rather than invent new xxx_PEC transactions. */ -static int i2c_smbus_add_pec(u16 addr, u8 command, int size, - union i2c_smbus_data *data) +/* Used for write only transactions */ +static inline void i2c_smbus_add_pec(struct i2c_msg *msg) { - u8 buf[3]; - - buf[0] = addr << 1; - buf[1] = command; - switch(size) { - case I2C_SMBUS_BYTE: - data->byte = i2c_smbus_pec(2, buf, NULL); - size = I2C_SMBUS_BYTE_DATA; - break; - case I2C_SMBUS_BYTE_DATA: - buf[2] = data->byte; - data->word = buf[2] | - (i2c_smbus_pec(3, buf, NULL) << 8); - size = I2C_SMBUS_WORD_DATA; - break; - case I2C_SMBUS_WORD_DATA: - /* unsupported */ - break; - case I2C_SMBUS_BLOCK_DATA: - data->block[data->block[0] + 1] = - i2c_smbus_pec(2, buf, data->block); - size = I2C_SMBUS_BLOCK_DATA_PEC; - break; - } - return size; + msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg); + msg->len++; } -static int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial, - union i2c_smbus_data *data) +/* Return <0 on CRC error + If there was a write before this read (most cases) we need to take the + partial CRC from the write part into account. + Note that this function does modify the message (we need to decrease the + message length to hide the CRC byte from the caller). */ +static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) { - u8 buf[3], rpec, cpec; + u8 rpec = msg->buf[--msg->len]; + cpec = i2c_smbus_msg_pec(cpec, msg); - buf[1] = command; - switch(size) { - case I2C_SMBUS_BYTE_DATA: - buf[0] = (addr << 1) | 1; - cpec = i2c_smbus_pec(2, buf, NULL); - rpec = data->byte; - break; - case I2C_SMBUS_WORD_DATA: - buf[0] = (addr << 1) | 1; - buf[2] = data->word & 0xff; - cpec = i2c_smbus_pec(3, buf, NULL); - rpec = data->word >> 8; - break; - case I2C_SMBUS_WORD_DATA_PEC: - /* unsupported */ - cpec = rpec = 0; - break; - case I2C_SMBUS_PROC_CALL_PEC: - /* unsupported */ - cpec = rpec = 0; - break; - case I2C_SMBUS_BLOCK_DATA_PEC: - buf[0] = (addr << 1); - buf[2] = (addr << 1) | 1; - cpec = i2c_smbus_pec(3, buf, data->block); - rpec = data->block[data->block[0] + 1]; - break; - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - buf[0] = (addr << 1) | 1; - rpec = i2c_smbus_partial_pec(partial, 1, - buf, data->block); - cpec = data->block[data->block[0] + 1]; - break; - default: - cpec = rpec = 0; - break; - } if (rpec != cpec) { pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n", rpec, cpec); @@ -951,9 +895,8 @@ s32 i2c_smbus_read_byte(struct i2c_client *client) s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value) { - union i2c_smbus_data data; /* only for PEC */ return i2c_smbus_xfer(client->adapter,client->addr,client->flags, - I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data); + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); } s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command) @@ -1043,6 +986,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, { addr, flags | I2C_M_RD, 0, msgbuf1 } }; int i; + u8 partial_pec = 0; msgbuf0[0] = command; switch(size) { @@ -1085,7 +1029,6 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, msgbuf0[2] = (data->word >> 8) & 0xff; break; case I2C_SMBUS_BLOCK_DATA: - case I2C_SMBUS_BLOCK_DATA_PEC: if (read_write == I2C_SMBUS_READ) { dev_err(&adapter->dev, "Block read not supported " "under I2C emulation!\n"); @@ -1098,14 +1041,11 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, data->block[0]); return -1; } - if(size == I2C_SMBUS_BLOCK_DATA_PEC) - (msg[0].len)++; for (i = 1; i < msg[0].len; i++) msgbuf0[i] = data->block[i-1]; } break; case I2C_SMBUS_BLOCK_PROC_CALL: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: dev_dbg(&adapter->dev, "Block process call not supported " "under I2C emulation!\n"); return -1; @@ -1130,9 +1070,30 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, return -1; } + i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA); + if (i) { + /* Compute PEC if first message is a write */ + if (!(msg[0].flags & I2C_M_RD)) { + if (num == 1) /* Write only */ + i2c_smbus_add_pec(&msg[0]); + else /* Write followed by read */ + partial_pec = i2c_smbus_msg_pec(0, &msg[0]); + } + /* Ask for PEC if last message is a read */ + if (msg[num-1].flags & I2C_M_RD) + msg[num-1].len++; + } + if (i2c_transfer(adapter, msg, num) < 0) return -1; + /* Check PEC if last message is a read */ + if (i && (msg[num-1].flags & I2C_M_RD)) { + if (i2c_smbus_check_pec(partial_pec, &msg[num-1]) < 0) + return -1; + } + if (read_write == I2C_SMBUS_READ) switch(size) { case I2C_SMBUS_BYTE: @@ -1161,28 +1122,8 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, union i2c_smbus_data * data) { s32 res; - int swpec = 0; - u8 partial = 0; flags &= I2C_M_TEN | I2C_CLIENT_PEC; - if((flags & I2C_CLIENT_PEC) && - !(i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HWPEC_CALC))) { - swpec = 1; - if(read_write == I2C_SMBUS_READ && - size == I2C_SMBUS_BLOCK_DATA) - size = I2C_SMBUS_BLOCK_DATA_PEC; - else if(size == I2C_SMBUS_PROC_CALL) - size = I2C_SMBUS_PROC_CALL_PEC; - else if(size == I2C_SMBUS_BLOCK_PROC_CALL) { - i2c_smbus_add_pec(addr, command, - I2C_SMBUS_BLOCK_DATA, data); - partial = data->block[data->block[0] + 1]; - size = I2C_SMBUS_BLOCK_PROC_CALL_PEC; - } else if(read_write == I2C_SMBUS_WRITE && - size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - size = i2c_smbus_add_pec(addr, command, size, data); - } if (adapter->algo->smbus_xfer) { down(&adapter->bus_lock); @@ -1193,13 +1134,6 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write, command,size,data); - if(res >= 0 && swpec && - size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA && - (read_write == I2C_SMBUS_READ || size == I2C_SMBUS_PROC_CALL_PEC || - size == I2C_SMBUS_BLOCK_PROC_CALL_PEC)) { - if(i2c_smbus_check_pec(addr, command, size, partial, data)) - return -1; - } return res; } diff --git a/include/linux/i2c.h b/include/linux/i2c.h index bcd4bb1b450c..78c64f7b3105 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -434,7 +434,7 @@ union i2c_smbus_data { __u8 byte; __u16 word; __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ - /* and one more for PEC */ + /* and one more for user-space compatibility */ }; /* smbus_access read or write markers */ -- GitLab From 585b3160f8212e58325bc1c0292c2ec01ac5db84 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:31:15 +0200 Subject: [PATCH 0703/1519] [PATCH] i2c: SMBus PEC support rewrite, 3 of 3 The new SMBus PEC implementation doesn't support PEC emulation on non-PEC non-I2C SMBus masters, so we can drop all related code. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-amd8111.c | 7 ------- drivers/i2c/busses/i2c-i801.c | 13 +++++-------- drivers/i2c/busses/i2c-nforce2.c | 7 ------- include/linux/i2c.h | 4 ---- 4 files changed, 5 insertions(+), 26 deletions(-) diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index aface7938a5b..f3b79a68dbec 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -253,13 +253,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl read_write = I2C_SMBUS_READ; break; - case I2C_SMBUS_WORD_DATA_PEC: - case I2C_SMBUS_BLOCK_DATA_PEC: - case I2C_SMBUS_PROC_CALL_PEC: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size); - return -1; - default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); return -1; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index b05e045f770c..27e7894a9d1c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -102,8 +102,8 @@ MODULE_PARM_DESC(force_addr, "EXTREMELY DANGEROUS!"); static int i801_transaction(void); -static int i801_block_transaction(union i2c_smbus_data *data, - char read_write, int command); +static int i801_block_transaction(union i2c_smbus_data *data, char read_write, + int command, int hwpec); static unsigned short i801_smba; static struct pci_driver i801_driver; @@ -249,7 +249,7 @@ static int i801_transaction(void) /* All-inclusive block transaction function */ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, - int command) + int command, int hwpec) { int i, len; int smbcmd; @@ -388,7 +388,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, goto END; } - if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) { + if (hwpec && command == I2C_SMBUS_BLOCK_DATA) { /* wait for INTR bit as advised by Intel */ timeout = 0; do { @@ -456,9 +456,6 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: - case I2C_SMBUS_BLOCK_DATA_PEC: - if(hwpec && size == I2C_SMBUS_BLOCK_DATA) - size = I2C_SMBUS_BLOCK_DATA_PEC; outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); @@ -476,7 +473,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, outb_p(1, SMBAUXCTL); /* enable HW PEC */ } if(block) - ret = i801_block_transaction(data, read_write, size); + ret = i801_block_transaction(data, read_write, size, hwpec); else { outb_p(xact | ENABLE_INT9, SMBHSTCNT); ret = i801_transaction(); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 9b4247610815..fd26036e68a3 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -188,13 +188,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); return -1; - case I2C_SMBUS_WORD_DATA_PEC: - case I2C_SMBUS_BLOCK_DATA_PEC: - case I2C_SMBUS_PROC_CALL_PEC: - case I2C_SMBUS_BLOCK_PROC_CALL_PEC: - dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size); - return -1; - default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); return -1; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 78c64f7b3105..32977fb1d99a 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -451,10 +451,6 @@ union i2c_smbus_data { #define I2C_SMBUS_BLOCK_DATA 5 #define I2C_SMBUS_I2C_BLOCK_DATA 6 #define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ -#define I2C_SMBUS_BLOCK_DATA_PEC 8 /* SMBus 2.0 */ -#define I2C_SMBUS_PROC_CALL_PEC 9 /* SMBus 2.0 */ -#define I2C_SMBUS_BLOCK_PROC_CALL_PEC 10 /* SMBus 2.0 */ -#define I2C_SMBUS_WORD_DATA_PEC 11 /* SMBus 2.0 */ /* ----- commands for the ioctl like i2c_command call: -- GitLab From e8aac4a9b417643dd9739b48473790a09b8b6cbe Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:34:42 +0200 Subject: [PATCH 0704/1519] [PATCH] i2c: i2c-i801 PEC code cleanups The tests leading to the use of hardware PEC in the i2c-i801 driver can be simplified. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-i801.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 27e7894a9d1c..4f63195069da 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -388,7 +388,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, goto END; } - if (hwpec && command == I2C_SMBUS_BLOCK_DATA) { + if (hwpec) { /* wait for INTR bit as advised by Intel */ timeout = 0; do { @@ -416,12 +416,13 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { - int hwpec = 0; + int hwpec; int block = 0; int ret, xact = 0; - if(isich4) - hwpec = (flags & I2C_CLIENT_PEC) != 0; + hwpec = isich4 && (flags & I2C_CLIENT_PEC) + && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA; switch (size) { case I2C_SMBUS_QUICK: @@ -467,11 +468,9 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, return -1; } - if(isich4 && hwpec) { - if(size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - outb_p(1, SMBAUXCTL); /* enable HW PEC */ - } + if (hwpec) + outb_p(1, SMBAUXCTL); /* enable hardware PEC */ + if(block) ret = i801_block_transaction(data, read_write, size, hwpec); else { @@ -479,11 +478,8 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, ret = i801_transaction(); } - if(isich4 && hwpec) { - if(size != I2C_SMBUS_QUICK && - size != I2C_SMBUS_I2C_BLOCK_DATA) - outb_p(0, SMBAUXCTL); - } + if (hwpec) + outb_p(0, SMBAUXCTL); /* disable hardware PEC */ if(block) return ret; -- GitLab From 8256fe0f40f1cd72f80f2c46fe0ab1638f03a98d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:37:52 +0200 Subject: [PATCH 0705/1519] [PATCH] hwmon: Separate the lm90 register read function Preparatory patch to add PEC support to the lm90 driver. We need a centralized function to read register values, where the PEC code will be later inserted. A positive side effect is that read errors are now handled properly. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/lm90.c | 107 +++++++++++++++++++++---------------------- 1 file changed, 53 insertions(+), 54 deletions(-) diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index dad0f1074956..5acc12ae4e36 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -349,6 +349,22 @@ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); * Real code */ +static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value) +{ + int err; + + err = i2c_smbus_read_byte_data(client, reg); + + if (err < 0) { + dev_warn(&client->dev, "Register %#02x read failed (%d)\n", + reg, err); + return err; + } + *value = err; + + return 0; +} + static int lm90_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) @@ -402,20 +418,22 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) if (kind < 0) { /* detection and identification */ u8 man_id, chip_id, reg_config1, reg_convrate; - man_id = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CHIP_ID); - reg_config1 = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONFIG1); - reg_convrate = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONVRATE); + if (lm90_read_reg(new_client, LM90_REG_R_MAN_ID, + &man_id) < 0 + || lm90_read_reg(new_client, LM90_REG_R_CHIP_ID, + &chip_id) < 0 + || lm90_read_reg(new_client, LM90_REG_R_CONFIG1, + ®_config1) < 0 + || lm90_read_reg(new_client, LM90_REG_R_CONVRATE, + ®_convrate) < 0) + goto exit_free; if (man_id == 0x01) { /* National Semiconductor */ u8 reg_config2; - reg_config2 = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONFIG2); + if (lm90_read_reg(new_client, LM90_REG_R_CONFIG2, + ®_config2) < 0) + goto exit_free; if ((reg_config1 & 0x2A) == 0x00 && (reg_config2 & 0xF8) == 0x00 @@ -547,7 +565,10 @@ static void lm90_init_client(struct i2c_client *client) */ i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, 5); /* 2 Hz */ - config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1); + if (lm90_read_reg(client, LM90_REG_R_CONFIG1, &config) < 0) { + dev_warn(&client->dev, "Initialization failed!\n"); + return; + } if (config & 0x40) i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config & 0xBF); /* run */ @@ -575,21 +596,15 @@ static struct lm90_data *lm90_update_device(struct device *dev) down(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { - u8 oldh, newh; + u8 oldh, newh, l; dev_dbg(&client->dev, "Updating lm90 data.\n"); - data->temp8[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_TEMP); - data->temp8[1] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_LOW); - data->temp8[2] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_HIGH); - data->temp8[3] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_CRIT); - data->temp8[4] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_CRIT); - data->temp_hyst = i2c_smbus_read_byte_data(client, - LM90_REG_R_TCRIT_HYST); + lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, &data->temp8[0]); + lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[1]); + lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[2]); + lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[3]); + lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[4]); + lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst); /* * There is a trick here. We have to read two registers to @@ -605,36 +620,20 @@ static struct lm90_data *lm90_update_device(struct device *dev) * then we have a valid reading. Else we have to read the low * byte again, and now we believe we have a correct reading. */ - oldh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - data->temp11[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPL); - newh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - if (newh != oldh) { - data->temp11[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPL); -#ifdef DEBUG - oldh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - /* oldh is actually newer */ - if (newh != oldh) - dev_warn(&client->dev, "Remote temperature may be " - "wrong.\n"); -#endif - } - data->temp11[0] |= (newh << 8); - - data->temp11[1] = (i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_LOWH) << 8) + - i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_LOWL); - data->temp11[2] = (i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_HIGHH) << 8) + - i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_HIGHL); - data->alarms = i2c_smbus_read_byte_data(client, - LM90_REG_R_STATUS); + if (lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &oldh) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &newh) == 0 + && (newh == oldh + || lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0)) + data->temp11[0] = (newh << 8) | l; + + if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &newh) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL, &l) == 0) + data->temp11[1] = (newh << 8) | l; + if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &newh) == 0 + && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, &l) == 0) + data->temp11[2] = (newh << 8) | l; + lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms); data->last_updated = jiffies; data->valid = 1; -- GitLab From c3df5806cdae6fac678c662b527cb974bef4b60c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 21:39:40 +0200 Subject: [PATCH 0706/1519] [PATCH] hwmon: Add PEC support to the lm90 driver Add PEC support to the lm90 driver. Only the ADM1032 chip supports it, and in a rather tricky way, which is why this patch comes with documentation reinforcements. At least, this demonstrates that the new PEC support logic in i2c-core can properly deal with chips with partial PEC support. As enabling PEC causes a significant performance drop, it can be disabled through a sysfs file (unsurprisingly named "pec"). Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/lm90 | 39 +++++++++++++++++++- Documentation/hwmon/sysfs-interface | 3 ++ drivers/hwmon/lm90.c | 57 ++++++++++++++++++++++++++++- 3 files changed, 96 insertions(+), 3 deletions(-) diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 2c4cf39471f4..70abf93ea376 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -71,8 +71,8 @@ increased resolution of the remote temperature measurement. The different chipsets of the family are not strictly identical, although very similar. This driver doesn't handle any specific feature for now, -but could if there ever was a need for it. For reference, here comes a -non-exhaustive list of specific features: +with the exception of SMBus PEC. For reference, here comes a non-exhaustive +list of specific features: LM90: * Filter and alert configuration register at 0xBF. @@ -91,6 +91,7 @@ ADM1032: * Conversion averaging. * Up to 64 conversions/s. * ALERT is triggered by open remote sensor. + * SMBus PEC support for Write Byte and Receive Byte transactions. ADT7461 * Extended temperature range (breaks compatibility) @@ -119,3 +120,37 @@ The lm90 driver will not update its values more frequently than every other second; reading them more often will do no harm, but will return 'old' values. +PEC Support +----------- + +The ADM1032 is the only chip of the family which supports PEC. It does +not support PEC on all transactions though, so some care must be taken. + +When reading a register value, the PEC byte is computed and sent by the +ADM1032 chip. However, in the case of a combined transaction (SMBus Read +Byte), the ADM1032 computes the CRC value over only the second half of +the message rather than its entirety, because it thinks the first half +of the message belongs to a different transaction. As a result, the CRC +value differs from what the SMBus master expects, and all reads fail. + +For this reason, the lm90 driver will enable PEC for the ADM1032 only if +the bus supports the SMBus Send Byte and Receive Byte transaction types. +These transactions will be used to read register values, instead of +SMBus Read Byte, and PEC will work properly. + +Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC. +Instead, it will try to write the PEC value to the register (because the +SMBus Send Byte transaction with PEC is similar to a Write Byte transaction +without PEC), which is not what we want. Thus, PEC is explicitely disabled +on SMBus Send Byte transactions in the lm90 driver. + +PEC on byte data transactions represents a significant increase in bandwidth +usage (+33% for writes, +25% for reads) in normal conditions. With the need +to use two SMBus transaction for reads, this overhead jumps to +50%. Worse, +two transactions will typically mean twice as much delay waiting for +transaction completion, effectively doubling the register cache refresh time. +I guess reliability comes at a price, but it's quite expensive this time. + +So, as not everyone might enjoy the slowdown, PEC can be disabled through +sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1 +to that file to enable PEC again. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 346400519d0d..764cdc5480e7 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -272,3 +272,6 @@ beep_mask Bitmask for beep. eeprom Raw EEPROM data in binary form. Read only. + +pec Enable or disable PEC (SMBus only) + Read/Write diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 5acc12ae4e36..fa0793e684fd 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -345,15 +345,63 @@ static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst, static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); +/* pec used for ADM1032 only */ +static ssize_t show_pec(struct device *dev, struct device_attribute *dummy, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC)); +} + +static ssize_t set_pec(struct device *dev, struct device_attribute *dummy, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + long val = simple_strtol(buf, NULL, 10); + + switch (val) { + case 0: + client->flags &= ~I2C_CLIENT_PEC; + break; + case 1: + client->flags |= I2C_CLIENT_PEC; + break; + default: + return -EINVAL; + } + + return count; +} + +static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec); + /* * Real code */ +/* The ADM1032 supports PEC but not on write byte transactions, so we need + to explicitely ask for a transaction without PEC. */ +static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value) +{ + return i2c_smbus_xfer(client->adapter, client->addr, + client->flags & ~I2C_CLIENT_PEC, + I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL); +} + +/* It is assumed that client->update_lock is held (unless we are in + detection or initialization steps). This matters when PEC is enabled, + because we don't want the address pointer to change between the write + byte and the read byte transactions. */ static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value) { int err; - err = i2c_smbus_read_byte_data(client, reg); + if (client->flags & I2C_CLIENT_PEC) { + err = adm1032_write_byte(client, reg); + if (err >= 0) + err = i2c_smbus_read_byte(client); + } else + err = i2c_smbus_read_byte_data(client, reg); if (err < 0) { dev_warn(&client->dev, "Register %#02x read failed (%d)\n", @@ -494,6 +542,10 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) name = "lm90"; } else if (kind == adm1032) { name = "adm1032"; + /* The ADM1032 supports PEC, but only if combined + transactions are not used. */ + if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + new_client->flags |= I2C_CLIENT_PEC; } else if (kind == lm99) { name = "lm99"; } else if (kind == lm86) { @@ -546,6 +598,9 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) &sensor_dev_attr_temp2_crit_hyst.dev_attr); device_create_file(&new_client->dev, &dev_attr_alarms); + if (new_client->flags & I2C_CLIENT_PEC) + device_create_file(&new_client->dev, &dev_attr_pec); + return 0; exit_detach: -- GitLab From 90209b42d0498d57a804bf81fea427bf39c5315c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 22:20:21 +0200 Subject: [PATCH 0707/1519] [PATCH] hwmon: lm90 documentation update Update the I2C addresses for the ADM1032 and ADT7461 chips. Also update the links to the Analog Devices web site. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/lm90 | 8 ++++---- drivers/hwmon/lm90.c | 16 +++++++--------- 2 files changed, 11 insertions(+), 13 deletions(-) diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 70abf93ea376..438cb24cee5b 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -24,14 +24,14 @@ Supported chips: http://www.national.com/pf/LM/LM86.html * Analog Devices ADM1032 Prefix: 'adm1032' - Addresses scanned: I2C 0x4c + Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the Analog Devices website - http://products.analog.com/products/info.asp?product=ADM1032 + http://www.analog.com/en/prod/0,2877,ADM1032,00.html * Analog Devices ADT7461 Prefix: 'adt7461' - Addresses scanned: I2C 0x4c + Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the Analog Devices website - http://products.analog.com/products/info.asp?product=ADT7461 + http://www.analog.com/en/prod/0,2877,ADT7461,00.html Note: Only if in ADM1032 compatibility mode * Maxim MAX6657 Prefix: 'max6657' diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index fa0793e684fd..83cf2e1b09f5 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -31,7 +31,7 @@ * Devices. That chip is similar to the LM90, with a few differences * that are not handled by this driver. Complete datasheet can be * obtained from Analog's website at: - * http://products.analog.com/products/info.asp?product=ADM1032 + * http://www.analog.com/en/prod/0,2877,ADM1032,00.html * Among others, it has a higher accuracy than the LM90, much like the * LM86 does. * @@ -49,7 +49,7 @@ * register values are decoded differently) it is ignored by this * driver. Complete datasheet can be obtained from Analog's website * at: - * http://products.analog.com/products/info.asp?product=ADT7461 + * http://www.analog.com/en/prod/0,2877,ADT7461,00.html * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -83,10 +83,10 @@ * Addresses to scan * Address is fully defined internally and cannot be changed except for * MAX6659. - * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c. - * LM89-1, and LM99-1 have address 0x4d. + * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658 + * have address 0x4c. + * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d. * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported). - * ADT7461 always has address 0x4c. */ static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END }; @@ -500,14 +500,12 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) } } else if (man_id == 0x41) { /* Analog Devices */ - if (address == 0x4C - && (chip_id & 0xF0) == 0x40 /* ADM1032 */ + if ((chip_id & 0xF0) == 0x40 /* ADM1032 */ && (reg_config1 & 0x3F) == 0x00 && reg_convrate <= 0x0A) { kind = adm1032; } else - if (address == 0x4c - && chip_id == 0x51 /* ADT7461 */ + if (chip_id == 0x51 /* ADT7461 */ && (reg_config1 & 0x1F) == 0x00 /* check compat mode */ && reg_convrate <= 0x0A) { kind = adt7461; -- GitLab From b890a07f7b002ee473986fa85ae3582de399a4cf Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 22:21:24 +0200 Subject: [PATCH 0708/1519] [PATCH] hwmon: smsc47m1 documentation update The SMSC LPC47M997 Super-I/O chip seems to be compatible with the LPC47M192, so it is supported by the smsc47m1 driver. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/smsc47m1 | 7 +++++++ drivers/hwmon/smsc47m1.c | 7 +++++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1 index 34e6478c1425..c15bbe68264e 100644 --- a/Documentation/hwmon/smsc47m1 +++ b/Documentation/hwmon/smsc47m1 @@ -12,6 +12,10 @@ Supported chips: http://www.smsc.com/main/datasheets/47m14x.pdf http://www.smsc.com/main/tools/discontinued/47m15x.pdf http://www.smsc.com/main/datasheets/47m192.pdf + * SMSC LPC47M997 + Addresses scanned: none, address read from Super I/O config space + Prefix: 'smsc47m1' + Datasheet: none Authors: Mark D. Studebaker , @@ -30,6 +34,9 @@ The 47M15x and 47M192 chips contain a full 'hardware monitoring block' in addition to the fan monitoring and control. The hardware monitoring block is not supported by the driver. +No documentation is available for the 47M997, but it has the same device +ID as the 47M15x and 47M192 chips and seems to be compatible. + Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan readings can be divided by a programmable divider (1, 2, 4 or 8) to give diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index bbe93a0688ec..5905c1af88f2 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -3,7 +3,7 @@ for hardware monitoring Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, - LPC47M15x and LPC47M192 Super-I/O chips. + LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips. Copyright (C) 2002 Mark D. Studebaker Copyright (C) 2004 Jean Delvare @@ -356,6 +356,8 @@ static int __init smsc47m1_find(unsigned short *addr) * 0x5F) and LPC47B27x (device id 0x51) have fan control. * The LPC47M15x and LPC47M192 chips "with hardware monitoring block" * can do much more besides (device id 0x60). + * The LPC47M997 is undocumented, but seems to be compatible with + * the LPC47M192, and has the same device id. */ if (val == 0x51) printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n"); @@ -364,7 +366,8 @@ static int __init smsc47m1_find(unsigned short *addr) else if (val == 0x5F) printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n"); else if (val == 0x60) - printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n"); + printk(KERN_INFO "smsc47m1: Found SMSC " + "LPC47M15x/LPC47M192/LPC47M997\n"); else { superio_exit(); return -ENODEV; -- GitLab From 0dc9a32d9a975ccd25b9f531451165c93e1c7313 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 22 Oct 2005 00:23:27 +0200 Subject: [PATCH 0709/1519] [PATCH] I2C: remove devfs support from i2c-dev driver as devfs is gone, this isn't needed anymore. Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-dev.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 276ec42a0717..ea14c8f1c82b 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -26,15 +26,11 @@ /* The I2C_RDWR ioctl code is written by Kolja Waschk */ -/* The devfs code is contributed by Philipp Matthias Hahn - */ - #include #include #include #include #include -#include #include #include #include @@ -431,8 +427,6 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) if (IS_ERR(i2c_dev)) return PTR_ERR(i2c_dev); - devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor), - S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor); pr_debug("i2c-dev: adapter [%s] registered as minor %d\n", adap->name, i2c_dev->minor); @@ -465,7 +459,6 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) return -ENODEV; init_completion(&i2c_dev->released); - devfs_remove("i2c/%d", i2c_dev->minor); return_i2c_dev(i2c_dev); class_device_unregister(&i2c_dev->class_dev); wait_for_completion(&i2c_dev->released); @@ -521,8 +514,6 @@ static int __init i2c_dev_init(void) if (res) goto out_unreg_class; - devfs_mk_dir("i2c"); - return 0; out_unreg_class: @@ -538,7 +529,6 @@ static void __exit i2c_dev_exit(void) { i2c_del_driver(&i2cdev_driver); class_unregister(&i2c_dev_class); - devfs_remove("i2c"); unregister_chrdev(I2C_MAJOR,"i2c"); } -- GitLab From a9d1b24d91f91b77db3da8aeacb414764f789b9c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 22 Oct 2005 00:23:27 +0200 Subject: [PATCH 0710/1519] [PATCH] I2C: add i2c module alias for i2c drivers to use This is the start of adding hotplug-like support for i2c devices. Signed-off-by: Greg Kroah-Hartman --- include/linux/i2c.h | 1 + include/linux/mod_devicetable.h | 5 +++++ scripts/mod/file2alias.c | 10 ++++++++++ 3 files changed, 16 insertions(+) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 32977fb1d99a..f88577ca3b3a 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -29,6 +29,7 @@ #include #include #include +#include #include /* for struct device */ #include diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 2f0299a448f6..7b08c11ec4cc 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -244,4 +244,9 @@ struct pcmcia_device_id { #define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200 #define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400 +/* I2C */ +struct i2c_device_id { + __u16 id; +}; + #endif /* LINUX_MOD_DEVICETABLE_H */ diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index f2ee673329a7..e3d144a3f10b 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -359,6 +359,13 @@ static int do_vio_entry(const char *filename, struct vio_device_id *vio, return 1; } +static int do_i2c_entry(const char *filename, struct i2c_device_id *i2c, char *alias) +{ + strcpy(alias, "i2c:"); + ADD(alias, "id", 1, i2c->id); + return 1; +} + /* Ignore any prefix, eg. v850 prepends _ */ static inline int sym_is(const char *symbol, const char *name) { @@ -443,6 +450,9 @@ void handle_moddevtable(struct module *mod, struct elf_info *info, else if (sym_is(symname, "__mod_vio_device_table")) do_table(symval, sym->st_size, sizeof(struct vio_device_id), do_vio_entry, mod); + else if (sym_is(symname, "__mod_i2c_device_table")) + do_table(symval, sym->st_size, sizeof(struct i2c_device_id), + do_i2c_entry, mod); } -- GitLab From c45154a3b1fecdbb51b5462c9f730b44e62b83a5 Mon Sep 17 00:00:00 2001 From: Ed Kear Date: Sat, 16 Jul 2005 23:32:19 -0400 Subject: [PATCH 0711/1519] [PATCH] libata: add support for Promise SATA 300 TX2plus PDC40775 I'm using this card in a RAID1 with 2 new SATA drives with no problems. Card - SATA 300 TX2plus PDC40775 (3d73) Signed-off-by: Ed Kear Signed-off-by: Jeff Garzik --- drivers/scsi/sata_promise.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 50495569f409..63911f16b6ec 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -209,6 +209,8 @@ static struct pci_device_id pdc_ata_pci_tbl[] = { board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_20319 }, -- GitLab From eaa5c54dbec70e2a93d6ed412bb589bbf9c90a17 Mon Sep 17 00:00:00 2001 From: Ivan Skytte Jorgensen Date: Fri, 28 Oct 2005 15:10:00 -0700 Subject: [PATCH 0712/1519] [SCTP] Rename SCTP specific control message flags. Rename SCTP specific control message flags to use SCTP_ prefix rather than MSG_ prefix as per the latest sctp sockets API draft. Signed-off-by: Ivan Skytte Jorgensen Signed-off-by: Sridhar Samudrala --- include/net/sctp/user.h | 8 ++++---- net/sctp/sm_make_chunk.c | 2 +- net/sctp/socket.c | 32 ++++++++++++++++---------------- net/sctp/ulpevent.c | 6 +++--- 4 files changed, 24 insertions(+), 24 deletions(-) diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index 1c5f19f995ad..f1c3bc54526a 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -171,10 +171,10 @@ struct sctp_sndrcvinfo { */ enum sctp_sinfo_flags { - MSG_UNORDERED = 1, /* Send/receive message unordered. */ - MSG_ADDR_OVER = 2, /* Override the primary destination. */ - MSG_ABORT=4, /* Send an ABORT message to the peer. */ - /* MSG_EOF is already defined per socket.h */ + SCTP_UNORDERED = 1, /* Send/receive message unordered. */ + SCTP_ADDR_OVER = 2, /* Override the primary destination. */ + SCTP_ABORT=4, /* Send an ABORT message to the peer. */ + SCTP_EOF=MSG_FIN, /* Initiate graceful shutdown process. */ }; diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 10e82ec2ebd3..660c61bdf164 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -554,7 +554,7 @@ struct sctp_chunk *sctp_make_datafrag_empty(struct sctp_association *asoc, dp.ppid = sinfo->sinfo_ppid; /* Set the flags for an unordered send. */ - if (sinfo->sinfo_flags & MSG_UNORDERED) { + if (sinfo->sinfo_flags & SCTP_UNORDERED) { flags |= SCTP_DATA_UNORDERED; dp.ssn = 0; } else diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 02e068d3450d..170045b6ee98 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1389,27 +1389,27 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, SCTP_DEBUG_PRINTK("msg_len: %zu, sinfo_flags: 0x%x\n", msg_len, sinfo_flags); - /* MSG_EOF or MSG_ABORT cannot be set on a TCP-style socket. */ - if (sctp_style(sk, TCP) && (sinfo_flags & (MSG_EOF | MSG_ABORT))) { + /* SCTP_EOF or SCTP_ABORT cannot be set on a TCP-style socket. */ + if (sctp_style(sk, TCP) && (sinfo_flags & (SCTP_EOF | SCTP_ABORT))) { err = -EINVAL; goto out_nounlock; } - /* If MSG_EOF is set, no data can be sent. Disallow sending zero - * length messages when MSG_EOF|MSG_ABORT is not set. - * If MSG_ABORT is set, the message length could be non zero with + /* If SCTP_EOF is set, no data can be sent. Disallow sending zero + * length messages when SCTP_EOF|SCTP_ABORT is not set. + * If SCTP_ABORT is set, the message length could be non zero with * the msg_iov set to the user abort reason. */ - if (((sinfo_flags & MSG_EOF) && (msg_len > 0)) || - (!(sinfo_flags & (MSG_EOF|MSG_ABORT)) && (msg_len == 0))) { + if (((sinfo_flags & SCTP_EOF) && (msg_len > 0)) || + (!(sinfo_flags & (SCTP_EOF|SCTP_ABORT)) && (msg_len == 0))) { err = -EINVAL; goto out_nounlock; } - /* If MSG_ADDR_OVER is set, there must be an address + /* If SCTP_ADDR_OVER is set, there must be an address * specified in msg_name. */ - if ((sinfo_flags & MSG_ADDR_OVER) && (!msg->msg_name)) { + if ((sinfo_flags & SCTP_ADDR_OVER) && (!msg->msg_name)) { err = -EINVAL; goto out_nounlock; } @@ -1458,14 +1458,14 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, goto out_unlock; } - if (sinfo_flags & MSG_EOF) { + if (sinfo_flags & SCTP_EOF) { SCTP_DEBUG_PRINTK("Shutting down association: %p\n", asoc); sctp_primitive_SHUTDOWN(asoc, NULL); err = 0; goto out_unlock; } - if (sinfo_flags & MSG_ABORT) { + if (sinfo_flags & SCTP_ABORT) { SCTP_DEBUG_PRINTK("Aborting association: %p\n", asoc); sctp_primitive_ABORT(asoc, msg); err = 0; @@ -1477,7 +1477,7 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, if (!asoc) { SCTP_DEBUG_PRINTK("There is no association yet.\n"); - if (sinfo_flags & (MSG_EOF | MSG_ABORT)) { + if (sinfo_flags & (SCTP_EOF | SCTP_ABORT)) { err = -EINVAL; goto out_unlock; } @@ -1611,10 +1611,10 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, /* If an address is passed with the sendto/sendmsg call, it is used * to override the primary destination address in the TCP model, or - * when MSG_ADDR_OVER flag is set in the UDP model. + * when SCTP_ADDR_OVER flag is set in the UDP model. */ if ((sctp_style(sk, TCP) && msg_name) || - (sinfo_flags & MSG_ADDR_OVER)) { + (sinfo_flags & SCTP_ADDR_OVER)) { chunk_tp = sctp_assoc_lookup_paddr(asoc, &to); if (!chunk_tp) { err = -EINVAL; @@ -4640,8 +4640,8 @@ SCTP_STATIC int sctp_msghdr_parse(const struct msghdr *msg, /* Minimally, validate the sinfo_flags. */ if (cmsgs->info->sinfo_flags & - ~(MSG_UNORDERED | MSG_ADDR_OVER | - MSG_ABORT | MSG_EOF)) + ~(SCTP_UNORDERED | SCTP_ADDR_OVER | + SCTP_ABORT | SCTP_EOF)) return -EINVAL; break; diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index 057e7fac3af0..e049f41faa47 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -698,7 +698,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc, event->ssn = ntohs(chunk->subh.data_hdr->ssn); event->ppid = chunk->subh.data_hdr->ppid; if (chunk->chunk_hdr->flags & SCTP_DATA_UNORDERED) { - event->flags |= MSG_UNORDERED; + event->flags |= SCTP_UNORDERED; event->cumtsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map); } event->tsn = ntohl(chunk->subh.data_hdr->tsn); @@ -824,7 +824,7 @@ void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event, * * recvmsg() flags: * - * MSG_UNORDERED - This flag is present when the message was sent + * SCTP_UNORDERED - This flag is present when the message was sent * non-ordered. */ sinfo.sinfo_flags = event->flags; @@ -839,7 +839,7 @@ void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event, * This field will hold the current cumulative TSN as * known by the underlying SCTP layer. Note this field is * ignored when sending and only valid for a receive - * operation when sinfo_flags are set to MSG_UNORDERED. + * operation when sinfo_flags are set to SCTP_UNORDERED. */ sinfo.sinfo_cumtsn = event->cumtsn; /* sinfo_assoc_id: sizeof (sctp_assoc_t) -- GitLab From 1993d683f39f77ddb46a662d7146247877d50b8f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 28 Oct 2005 15:30:34 -0700 Subject: [PATCH 0713/1519] [IPoIB] Drop RX packets when out of memory Change the way IPoIB handles RX packets when it can't allocate a new receive skbuff. If the allocation of a new receive skb fails, we now drop the packet we just received and repost the original receive skb. This means that the receive ring always stays full and we don't have to monkey around with trying to schedule a refill task for later. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 21 ++-- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 116 +++++++++++++--------- drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 +- 3 files changed, 85 insertions(+), 60 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 6b14bd1c60a0..c994a916a58a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -100,7 +100,12 @@ struct ipoib_pseudoheader { struct ipoib_mcast; -struct ipoib_buf { +struct ipoib_rx_buf { + struct sk_buff *skb; + dma_addr_t mapping; +}; + +struct ipoib_tx_buf { struct sk_buff *skb; DECLARE_PCI_UNMAP_ADDR(mapping) }; @@ -150,14 +155,14 @@ struct ipoib_dev_priv { unsigned int admin_mtu; unsigned int mcast_mtu; - struct ipoib_buf *rx_ring; + struct ipoib_rx_buf *rx_ring; - spinlock_t tx_lock; - struct ipoib_buf *tx_ring; - unsigned tx_head; - unsigned tx_tail; - struct ib_sge tx_sge; - struct ib_send_wr tx_wr; + spinlock_t tx_lock; + struct ipoib_tx_buf *tx_ring; + unsigned tx_head; + unsigned tx_tail; + struct ib_sge tx_sge; + struct ib_send_wr tx_wr; struct ib_wc ibwc[IPOIB_NUM_WC]; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 02d0e0006578..192fef884e21 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -95,57 +95,65 @@ void ipoib_free_ah(struct kref *kref) } } -static inline int ipoib_ib_receive(struct ipoib_dev_priv *priv, - unsigned int wr_id, - dma_addr_t addr) +static int ipoib_ib_post_receive(struct net_device *dev, int id) { - struct ib_sge list = { - .addr = addr, - .length = IPOIB_BUF_SIZE, - .lkey = priv->mr->lkey, - }; - struct ib_recv_wr param = { - .wr_id = wr_id | IPOIB_OP_RECV, - .sg_list = &list, - .num_sge = 1, - }; + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_sge list; + struct ib_recv_wr param; struct ib_recv_wr *bad_wr; + int ret; + + list.addr = priv->rx_ring[id].mapping; + list.length = IPOIB_BUF_SIZE; + list.lkey = priv->mr->lkey; + + param.next = NULL; + param.wr_id = id | IPOIB_OP_RECV; + param.sg_list = &list; + param.num_sge = 1; + + ret = ib_post_recv(priv->qp, ¶m, &bad_wr); + if (unlikely(ret)) { + ipoib_warn(priv, "receive failed for buf %d (%d)\n", id, ret); + dma_unmap_single(priv->ca->dma_device, + priv->rx_ring[id].mapping, + IPOIB_BUF_SIZE, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_ring[id].skb); + priv->rx_ring[id].skb = NULL; + } - return ib_post_recv(priv->qp, ¶m, &bad_wr); + return ret; } -static int ipoib_ib_post_receive(struct net_device *dev, int id) +static int ipoib_alloc_rx_skb(struct net_device *dev, int id) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct sk_buff *skb; dma_addr_t addr; - int ret; skb = dev_alloc_skb(IPOIB_BUF_SIZE + 4); - if (!skb) { - ipoib_warn(priv, "failed to allocate receive buffer\n"); - - priv->rx_ring[id].skb = NULL; + if (!skb) return -ENOMEM; - } - skb_reserve(skb, 4); /* 16 byte align IP header */ - priv->rx_ring[id].skb = skb; + + /* + * IB will leave a 40 byte gap for a GRH and IPoIB adds a 4 byte + * header. So we need 4 more bytes to get to 48 and align the + * IP header to a multiple of 16. + */ + skb_reserve(skb, 4); + addr = dma_map_single(priv->ca->dma_device, skb->data, IPOIB_BUF_SIZE, DMA_FROM_DEVICE); - pci_unmap_addr_set(&priv->rx_ring[id], mapping, addr); - - ret = ipoib_ib_receive(priv, id, addr); - if (ret) { - ipoib_warn(priv, "ipoib_ib_receive failed for buf %d (%d)\n", - id, ret); - dma_unmap_single(priv->ca->dma_device, addr, - IPOIB_BUF_SIZE, DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(addr))) { dev_kfree_skb_any(skb); - priv->rx_ring[id].skb = NULL; + return -EIO; } - return ret; + priv->rx_ring[id].skb = skb; + priv->rx_ring[id].mapping = addr; + + return 0; } static int ipoib_ib_post_receives(struct net_device *dev) @@ -154,6 +162,10 @@ static int ipoib_ib_post_receives(struct net_device *dev) int i; for (i = 0; i < IPOIB_RX_RING_SIZE; ++i) { + if (ipoib_alloc_rx_skb(dev, i)) { + ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); + return -ENOMEM; + } if (ipoib_ib_post_receive(dev, i)) { ipoib_warn(priv, "ipoib_ib_post_receive failed for buf %d\n", i); return -EIO; @@ -176,28 +188,36 @@ static void ipoib_ib_handle_wc(struct net_device *dev, wr_id &= ~IPOIB_OP_RECV; if (wr_id < IPOIB_RX_RING_SIZE) { - struct sk_buff *skb = priv->rx_ring[wr_id].skb; - - priv->rx_ring[wr_id].skb = NULL; + struct sk_buff *skb = priv->rx_ring[wr_id].skb; + dma_addr_t addr = priv->rx_ring[wr_id].mapping; - dma_unmap_single(priv->ca->dma_device, - pci_unmap_addr(&priv->rx_ring[wr_id], - mapping), - IPOIB_BUF_SIZE, - DMA_FROM_DEVICE); - - if (wc->status != IB_WC_SUCCESS) { + if (unlikely(wc->status != IB_WC_SUCCESS)) { if (wc->status != IB_WC_WR_FLUSH_ERR) ipoib_warn(priv, "failed recv event " "(status=%d, wrid=%d vend_err %x)\n", wc->status, wr_id, wc->vendor_err); + dma_unmap_single(priv->ca->dma_device, addr, + IPOIB_BUF_SIZE, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); + priv->rx_ring[wr_id].skb = NULL; return; } + /* + * If we can't allocate a new RX buffer, dump + * this packet and reuse the old buffer. + */ + if (unlikely(ipoib_alloc_rx_skb(dev, wr_id))) { + ++priv->stats.rx_dropped; + goto repost; + } + ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n", wc->byte_len, wc->slid); + dma_unmap_single(priv->ca->dma_device, addr, + IPOIB_BUF_SIZE, DMA_FROM_DEVICE); + skb_put(skb, wc->byte_len); skb_pull(skb, IB_GRH_BYTES); @@ -220,8 +240,8 @@ static void ipoib_ib_handle_wc(struct net_device *dev, dev_kfree_skb_any(skb); } - /* repost receive */ - if (ipoib_ib_post_receive(dev, wr_id)) + repost: + if (unlikely(ipoib_ib_post_receive(dev, wr_id))) ipoib_warn(priv, "ipoib_ib_post_receive failed " "for buf %d\n", wr_id); } else @@ -229,7 +249,7 @@ static void ipoib_ib_handle_wc(struct net_device *dev, wr_id); } else { - struct ipoib_buf *tx_req; + struct ipoib_tx_buf *tx_req; unsigned long flags; if (wr_id >= IPOIB_TX_RING_SIZE) { @@ -302,7 +322,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_ah *address, u32 qpn) { struct ipoib_dev_priv *priv = netdev_priv(dev); - struct ipoib_buf *tx_req; + struct ipoib_tx_buf *tx_req; dma_addr_t addr; if (skb->len > dev->mtu + INFINIBAND_ALEN) { @@ -468,7 +488,7 @@ int ipoib_ib_dev_stop(struct net_device *dev) struct ib_qp_attr qp_attr; int attr_mask; unsigned long begin; - struct ipoib_buf *tx_req; + struct ipoib_tx_buf *tx_req; int i; /* Kill the existing QP and allocate a new one */ diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index ee303859b044..cd4f42328dbe 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -732,7 +732,7 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) /* Allocate RX/TX "rings" to hold queued skbs */ - priv->rx_ring = kmalloc(IPOIB_RX_RING_SIZE * sizeof (struct ipoib_buf), + priv->rx_ring = kmalloc(IPOIB_RX_RING_SIZE * sizeof (struct ipoib_rx_buf), GFP_KERNEL); if (!priv->rx_ring) { printk(KERN_WARNING "%s: failed to allocate RX ring (%d entries)\n", @@ -740,9 +740,9 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) goto out; } memset(priv->rx_ring, 0, - IPOIB_RX_RING_SIZE * sizeof (struct ipoib_buf)); + IPOIB_RX_RING_SIZE * sizeof (struct ipoib_rx_buf)); - priv->tx_ring = kmalloc(IPOIB_TX_RING_SIZE * sizeof (struct ipoib_buf), + priv->tx_ring = kmalloc(IPOIB_TX_RING_SIZE * sizeof (struct ipoib_tx_buf), GFP_KERNEL); if (!priv->tx_ring) { printk(KERN_WARNING "%s: failed to allocate TX ring (%d entries)\n", @@ -750,7 +750,7 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) goto out_rx_ring_cleanup; } memset(priv->tx_ring, 0, - IPOIB_TX_RING_SIZE * sizeof (struct ipoib_buf)); + IPOIB_TX_RING_SIZE * sizeof (struct ipoib_tx_buf)); /* priv->tx_head & tx_tail are already 0 */ -- GitLab From a1ab3582699def352dab1355adcadd3d47f79f0f Mon Sep 17 00:00:00 2001 From: Ivan Skytte Jorgensen Date: Fri, 28 Oct 2005 15:33:24 -0700 Subject: [PATCH 0714/1519] [SCTP] Fix SCTP_SETADAPTION sockopt to use the correct structure. Signed-off-by: Ivan Skytte Jorgensen Signed-off-by: Sridhar Samudrala --- net/sctp/socket.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 170045b6ee98..c66c161908c0 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2384,14 +2384,14 @@ static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optva static int sctp_setsockopt_adaption_layer(struct sock *sk, char __user *optval, int optlen) { - __u32 val; + struct sctp_setadaption adaption; - if (optlen < sizeof(__u32)) + if (optlen != sizeof(struct sctp_setadaption)) return -EINVAL; - if (copy_from_user(&val, optval, sizeof(__u32))) + if (copy_from_user(&adaption, optval, optlen)) return -EFAULT; - sctp_sk(sk)->adaption_ind = val; + sctp_sk(sk)->adaption_ind = adaption.ssb_adaption_ind; return 0; } @@ -3672,17 +3672,15 @@ static int sctp_getsockopt_primary_addr(struct sock *sk, int len, static int sctp_getsockopt_adaption_layer(struct sock *sk, int len, char __user *optval, int __user *optlen) { - __u32 val; + struct sctp_setadaption adaption; - if (len < sizeof(__u32)) + if (len != sizeof(struct sctp_setadaption)) return -EINVAL; - len = sizeof(__u32); - val = sctp_sk(sk)->adaption_ind; - if (put_user(len, optlen)) - return -EFAULT; - if (copy_to_user(optval, &val, len)) + adaption.ssb_adaption_ind = sctp_sk(sk)->adaption_ind; + if (copy_to_user(optval, &adaption, len)) return -EFAULT; + return 0; } -- GitLab From 96a339985d4c6874d32909e8f1903e6e6c141399 Mon Sep 17 00:00:00 2001 From: Ivan Skytte Jorgensen Date: Fri, 28 Oct 2005 15:36:12 -0700 Subject: [PATCH 0715/1519] [SCTP] Allow SCTP_MAXSEG to revert to default frag point with a '0' value. Signed-off-by: Ivan Skytte Jorgensen Signed-off-by: Sridhar Samudrala --- net/sctp/socket.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index c66c161908c0..97b556c1c450 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2306,16 +2306,14 @@ static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optl return -EINVAL; if (get_user(val, (int __user *)optval)) return -EFAULT; - if ((val < 8) || (val > SCTP_MAX_CHUNK_LEN)) + if ((val != 0) && ((val < 8) || (val > SCTP_MAX_CHUNK_LEN))) return -EINVAL; sp->user_frag = val; - if (val) { - /* Update the frag_point of the existing associations. */ - list_for_each(pos, &(sp->ep->asocs)) { - asoc = list_entry(pos, struct sctp_association, asocs); - asoc->frag_point = sctp_frag_point(sp, asoc->pmtu); - } + /* Update the frag_point of the existing associations. */ + list_for_each(pos, &(sp->ep->asocs)) { + asoc = list_entry(pos, struct sctp_association, asocs); + asoc->frag_point = sctp_frag_point(sp, asoc->pmtu); } return 0; -- GitLab From 2cea752f683af1be58ee8f25717c0a8118e0ac5b Mon Sep 17 00:00:00 2001 From: "R.Marek@sh.cvut.cz" Date: Tue, 27 Sep 2005 21:54:51 +0000 Subject: [PATCH 0716/1519] [PATCH] PCI: ICH6 ACPI and GPIO quirk This patch just adds ACPI and GPIO regions to its LPC bridge, similar way as ICH4 did. I would like to thank Michal Mleczko for testing. Signed-off-by: Rudolf Marek Signed-off-by: Greg Kroah-Hartman drivers/pci/quirks.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) --- drivers/pci/quirks.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7992bc8cc6a4..0663428a0e64 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -414,6 +414,18 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi ); +static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev) +{ + u32 region; + + pci_read_config_dword(dev, 0x40, ®ion); + quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO"); + + pci_read_config_dword(dev, 0x48, ®ion); + quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi ); + /* * VIA ACPI: One IO region pointed to by longword at * 0x48 or 0x20 (256 bytes of ACPI registers) -- GitLab From e04b0ea2e0f9c1bb0d874db4493fc7f7a623116b Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 27 Sep 2005 01:21:55 -0700 Subject: [PATCH 0717/1519] [PATCH] PCI: Block config access during BIST Some PCI adapters (eg. ipr scsi adapters) have an exposure today in that they issue BIST to the adapter to reset the card. If, during the time it takes to complete BIST, userspace attempts to access PCI config space, the host bus bridge will master abort the access since the ipr adapter does not respond on the PCI bus for a brief period of time when running BIST. On PPC64 hardware, this master abort results in the host PCI bridge isolating that PCI device from the rest of the system, making the device unusable until Linux is rebooted. This patch is an attempt to close that exposure by introducing some blocking code in the PCI code. When blocked, writes will be humored and reads will return the cached value. Ben Herrenschmidt has also mentioned that he plans to use this in PPC power management. Signed-off-by: Brian King Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman drivers/pci/access.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci-sysfs.c | 20 +++++----- drivers/pci/pci.h | 7 +++ drivers/pci/proc.c | 28 +++++++-------- drivers/pci/syscall.c | 14 +++---- include/linux/pci.h | 7 +++ 6 files changed, 134 insertions(+), 31 deletions(-) --- drivers/pci/access.c | 89 +++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci-sysfs.c | 20 ++++----- drivers/pci/pci.h | 7 ++++ drivers/pci/proc.c | 28 ++++++------- drivers/pci/syscall.c | 14 +++---- include/linux/pci.h | 7 ++++ 6 files changed, 134 insertions(+), 31 deletions(-) diff --git a/drivers/pci/access.c b/drivers/pci/access.c index 24a76de49f41..2a42add7f563 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -60,3 +60,92 @@ EXPORT_SYMBOL(pci_bus_read_config_dword); EXPORT_SYMBOL(pci_bus_write_config_byte); EXPORT_SYMBOL(pci_bus_write_config_word); EXPORT_SYMBOL(pci_bus_write_config_dword); + +static u32 pci_user_cached_config(struct pci_dev *dev, int pos) +{ + u32 data; + + data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])]; + data >>= (pos % sizeof(dev->saved_config_space[0])) * 8; + return data; +} + +#define PCI_USER_READ_CONFIG(size,type) \ +int pci_user_read_config_##size \ + (struct pci_dev *dev, int pos, type *val) \ +{ \ + unsigned long flags; \ + int ret = 0; \ + u32 data = -1; \ + if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ + spin_lock_irqsave(&pci_lock, flags); \ + if (likely(!dev->block_ucfg_access)) \ + ret = dev->bus->ops->read(dev->bus, dev->devfn, \ + pos, sizeof(type), &data); \ + else if (pos < sizeof(dev->saved_config_space)) \ + data = pci_user_cached_config(dev, pos); \ + spin_unlock_irqrestore(&pci_lock, flags); \ + *val = (type)data; \ + return ret; \ +} + +#define PCI_USER_WRITE_CONFIG(size,type) \ +int pci_user_write_config_##size \ + (struct pci_dev *dev, int pos, type val) \ +{ \ + unsigned long flags; \ + int ret = -EIO; \ + if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ + spin_lock_irqsave(&pci_lock, flags); \ + if (likely(!dev->block_ucfg_access)) \ + ret = dev->bus->ops->write(dev->bus, dev->devfn, \ + pos, sizeof(type), val); \ + spin_unlock_irqrestore(&pci_lock, flags); \ + return ret; \ +} + +PCI_USER_READ_CONFIG(byte, u8) +PCI_USER_READ_CONFIG(word, u16) +PCI_USER_READ_CONFIG(dword, u32) +PCI_USER_WRITE_CONFIG(byte, u8) +PCI_USER_WRITE_CONFIG(word, u16) +PCI_USER_WRITE_CONFIG(dword, u32) + +/** + * pci_block_user_cfg_access - Block userspace PCI config reads/writes + * @dev: pci device struct + * + * This function blocks any userspace PCI config accesses from occurring. + * When blocked, any writes will be bit bucketed and reads will return the + * data saved using pci_save_state for the first 64 bytes of config + * space and return 0xff for all other config reads. + **/ +void pci_block_user_cfg_access(struct pci_dev *dev) +{ + unsigned long flags; + + pci_save_state(dev); + + /* spinlock to synchronize with anyone reading config space now */ + spin_lock_irqsave(&pci_lock, flags); + dev->block_ucfg_access = 1; + spin_unlock_irqrestore(&pci_lock, flags); +} +EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); + +/** + * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes + * @dev: pci device struct + * + * This function allows userspace PCI config accesses to resume. + **/ +void pci_unblock_user_cfg_access(struct pci_dev *dev) +{ + unsigned long flags; + + /* spinlock to synchronize with anyone reading saved config space */ + spin_lock_irqsave(&pci_lock, flags); + dev->block_ucfg_access = 0; + spin_unlock_irqrestore(&pci_lock, flags); +} +EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 2898830c496f..965a5934623a 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -130,7 +130,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if ((off & 1) && size) { u8 val; - pci_read_config_byte(dev, off, &val); + pci_user_read_config_byte(dev, off, &val); data[off - init_off] = val; off++; size--; @@ -138,7 +138,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if ((off & 3) && size > 2) { u16 val; - pci_read_config_word(dev, off, &val); + pci_user_read_config_word(dev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; off += 2; @@ -147,7 +147,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) while (size > 3) { u32 val; - pci_read_config_dword(dev, off, &val); + pci_user_read_config_dword(dev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; data[off - init_off + 2] = (val >> 16) & 0xff; @@ -158,7 +158,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if (size >= 2) { u16 val; - pci_read_config_word(dev, off, &val); + pci_user_read_config_word(dev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; off += 2; @@ -167,7 +167,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if (size > 0) { u8 val; - pci_read_config_byte(dev, off, &val); + pci_user_read_config_byte(dev, off, &val); data[off - init_off] = val; off++; --size; @@ -192,7 +192,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) } if ((off & 1) && size) { - pci_write_config_byte(dev, off, data[off - init_off]); + pci_user_write_config_byte(dev, off, data[off - init_off]); off++; size--; } @@ -200,7 +200,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if ((off & 3) && size > 2) { u16 val = data[off - init_off]; val |= (u16) data[off - init_off + 1] << 8; - pci_write_config_word(dev, off, val); + pci_user_write_config_word(dev, off, val); off += 2; size -= 2; } @@ -210,7 +210,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) val |= (u32) data[off - init_off + 1] << 8; val |= (u32) data[off - init_off + 2] << 16; val |= (u32) data[off - init_off + 3] << 24; - pci_write_config_dword(dev, off, val); + pci_user_write_config_dword(dev, off, val); off += 4; size -= 4; } @@ -218,13 +218,13 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) if (size >= 2) { u16 val = data[off - init_off]; val |= (u16) data[off - init_off + 1] << 8; - pci_write_config_word(dev, off, val); + pci_user_write_config_word(dev, off, val); off += 2; size -= 2; } if (size) { - pci_write_config_byte(dev, off, data[off - init_off]); + pci_user_write_config_byte(dev, off, data[off - init_off]); off++; --size; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index d3f3dd42240d..6527b36c9a61 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -15,6 +15,13 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state); +extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); +extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); +extern int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val); +extern int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val); +extern int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val); +extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val); + /* PCI /proc functions */ #ifdef CONFIG_PROC_FS extern int pci_proc_attach_device(struct pci_dev *dev); diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 9613f666c110..9eb465727fce 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -80,7 +80,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if ((pos & 1) && cnt) { unsigned char val; - pci_read_config_byte(dev, pos, &val); + pci_user_read_config_byte(dev, pos, &val); __put_user(val, buf); buf++; pos++; @@ -89,7 +89,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if ((pos & 3) && cnt > 2) { unsigned short val; - pci_read_config_word(dev, pos, &val); + pci_user_read_config_word(dev, pos, &val); __put_user(cpu_to_le16(val), (unsigned short __user *) buf); buf += 2; pos += 2; @@ -98,7 +98,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp while (cnt >= 4) { unsigned int val; - pci_read_config_dword(dev, pos, &val); + pci_user_read_config_dword(dev, pos, &val); __put_user(cpu_to_le32(val), (unsigned int __user *) buf); buf += 4; pos += 4; @@ -107,7 +107,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if (cnt >= 2) { unsigned short val; - pci_read_config_word(dev, pos, &val); + pci_user_read_config_word(dev, pos, &val); __put_user(cpu_to_le16(val), (unsigned short __user *) buf); buf += 2; pos += 2; @@ -116,7 +116,7 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if (cnt) { unsigned char val; - pci_read_config_byte(dev, pos, &val); + pci_user_read_config_byte(dev, pos, &val); __put_user(val, buf); buf++; pos++; @@ -151,7 +151,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if ((pos & 1) && cnt) { unsigned char val; __get_user(val, buf); - pci_write_config_byte(dev, pos, val); + pci_user_write_config_byte(dev, pos, val); buf++; pos++; cnt--; @@ -160,7 +160,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if ((pos & 3) && cnt > 2) { unsigned short val; __get_user(val, (unsigned short __user *) buf); - pci_write_config_word(dev, pos, le16_to_cpu(val)); + pci_user_write_config_word(dev, pos, le16_to_cpu(val)); buf += 2; pos += 2; cnt -= 2; @@ -169,7 +169,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof while (cnt >= 4) { unsigned int val; __get_user(val, (unsigned int __user *) buf); - pci_write_config_dword(dev, pos, le32_to_cpu(val)); + pci_user_write_config_dword(dev, pos, le32_to_cpu(val)); buf += 4; pos += 4; cnt -= 4; @@ -178,7 +178,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if (cnt >= 2) { unsigned short val; __get_user(val, (unsigned short __user *) buf); - pci_write_config_word(dev, pos, le16_to_cpu(val)); + pci_user_write_config_word(dev, pos, le16_to_cpu(val)); buf += 2; pos += 2; cnt -= 2; @@ -187,7 +187,7 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if (cnt) { unsigned char val; __get_user(val, buf); - pci_write_config_byte(dev, pos, val); + pci_user_write_config_byte(dev, pos, val); buf++; pos++; cnt--; @@ -484,10 +484,10 @@ static int show_dev_config(struct seq_file *m, void *v) drv = pci_dev_driver(dev); - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - pci_read_config_byte (dev, PCI_LATENCY_TIMER, &latency); - pci_read_config_byte (dev, PCI_MIN_GNT, &min_gnt); - pci_read_config_byte (dev, PCI_MAX_LAT, &max_lat); + pci_user_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); + pci_user_read_config_byte (dev, PCI_LATENCY_TIMER, &latency); + pci_user_read_config_byte (dev, PCI_MIN_GNT, &min_gnt); + pci_user_read_config_byte (dev, PCI_MAX_LAT, &max_lat); seq_printf(m, " Bus %2d, device %3d, function %2d:\n", dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); seq_printf(m, " Class %04x", class_rev >> 16); diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c index c071790cc983..87fafc08cb9d 100644 --- a/drivers/pci/syscall.c +++ b/drivers/pci/syscall.c @@ -13,7 +13,7 @@ #include #include #include - +#include "pci.h" asmlinkage long sys_pciconfig_read(unsigned long bus, unsigned long dfn, @@ -38,13 +38,13 @@ sys_pciconfig_read(unsigned long bus, unsigned long dfn, lock_kernel(); switch (len) { case 1: - cfg_ret = pci_read_config_byte(dev, off, &byte); + cfg_ret = pci_user_read_config_byte(dev, off, &byte); break; case 2: - cfg_ret = pci_read_config_word(dev, off, &word); + cfg_ret = pci_user_read_config_word(dev, off, &word); break; case 4: - cfg_ret = pci_read_config_dword(dev, off, &dword); + cfg_ret = pci_user_read_config_dword(dev, off, &dword); break; default: err = -EINVAL; @@ -112,7 +112,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, err = get_user(byte, (u8 __user *)buf); if (err) break; - err = pci_write_config_byte(dev, off, byte); + err = pci_user_write_config_byte(dev, off, byte); if (err != PCIBIOS_SUCCESSFUL) err = -EIO; break; @@ -121,7 +121,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, err = get_user(word, (u16 __user *)buf); if (err) break; - err = pci_write_config_word(dev, off, word); + err = pci_user_write_config_word(dev, off, word); if (err != PCIBIOS_SUCCESSFUL) err = -EIO; break; @@ -130,7 +130,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn, err = get_user(dword, (u32 __user *)buf); if (err) break; - err = pci_write_config_dword(dev, off, dword); + err = pci_user_write_config_dword(dev, off, dword); if (err != PCIBIOS_SUCCESSFUL) err = -EIO; break; diff --git a/include/linux/pci.h b/include/linux/pci.h index 7349058ed778..3596ac94ecff 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -132,6 +132,7 @@ struct pci_dev { unsigned int is_enabled:1; /* pci_enable_device has been called */ unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ + unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ u32 saved_config_space[16]; /* config space saved at suspend time */ struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ @@ -490,6 +491,9 @@ extern void pci_disable_msix(struct pci_dev *dev); extern void msi_remove_pci_irq_vectors(struct pci_dev *dev); #endif +extern void pci_block_user_cfg_access(struct pci_dev *dev); +extern void pci_unblock_user_cfg_access(struct pci_dev *dev); + /* * PCI domain support. Sometimes called PCI segment (eg by ACPI), * a PCI domain is defined to be a set of PCI busses which share @@ -560,6 +564,9 @@ static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int en #define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0) +static inline void pci_block_user_cfg_access(struct pci_dev *dev) { } +static inline void pci_unblock_user_cfg_access(struct pci_dev *dev) { } + #endif /* CONFIG_PCI */ /* Include architecture-dependent settings and functions */ -- GitLab From b30197d2c07b396907b81673354a015a9d2b216c Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 27 Sep 2005 01:21:56 -0700 Subject: [PATCH 0718/1519] [PATCH] PCI: ipr: Block config access during BIST IPR scsi adapter have an exposure today in that they issue BIST to the adapter to reset the card. If, during the time it takes to complete BIST, userspace attempts to access PCI config space, the host bus bridge will master abort the access since the ipr adapter does not respond on the PCI bus for a brief period of time when running BIST. On PPC64 hardware, this master abort results in the host PCI bridge isolating that PCI device from the rest of the system, making the device unusable until Linux is rebooted. This patch makes use of some newly added PCI layer APIs that allow for protection from userspace accessing config space of a device in scenarios such as this. Signed-off-by: Brian King Cc: Benjamin Herrenschmidt Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman drivers/scsi/ipr.c | 2 ++ 1 file changed, 2 insertions(+) --- drivers/scsi/ipr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index babd48363402..e0039dfae8e5 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4944,6 +4944,7 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) int rc; ENTER; + pci_unblock_user_cfg_access(ioa_cfg->pdev); rc = pci_restore_state(ioa_cfg->pdev); if (rc != PCIBIOS_SUCCESSFUL) { @@ -4998,6 +4999,7 @@ static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd) int rc; ENTER; + pci_block_user_cfg_access(ioa_cfg->pdev); rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START); if (rc != PCIBIOS_SUCCESSFUL) { -- GitLab From d3535fbbce0eef8faa8de30d187fc83b11b858ef Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Sep 2005 17:50:51 -0400 Subject: [PATCH 0719/1519] [PATCH] pci: cleanup need_restore switch statement Cleanup the need_restore switch statement in pci_set_power_state(). This makes it more safe by explicitly handling all the PCI power states instead of handling them as the default case. It also reads a little better IMHO. Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 259d247b7551..39bdb938521d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -314,19 +314,19 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) * sets PowerState to 0. */ switch (dev->current_state) { + case PCI_D0: + case PCI_D1: + case PCI_D2: + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= state; + break; case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) need_restore = 1; /* Fall-through: force to D0 */ - case PCI_D3hot: - case PCI_D3cold: - case PCI_POWER_ERROR: - pmcsr = 0; - break; default: - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= state; + pmcsr = 0; break; } -- GitLab From c8920f0c8b3b42537ab4a54ff92c11daf48fdfec Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 28 Sep 2005 15:15:16 -0600 Subject: [PATCH 0720/1519] [PATCH] cpcihp_zt5550: add pci_enable_device() Add pci_{enable,disable}_device() calls. Without pci_enable_device(), dev->irq is garbage, and cpcihp_zt5550 relies on it. Compiled but untested, since I don't have the hardware. Signed-off-by: Bjorn Helgaas Signed-off-by: Scott Murray Signed-off-by: Greg Kroah-Hartman drivers/pci/hotplug/cpcihp_zt5550.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) --- drivers/pci/hotplug/cpcihp_zt5550.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c index e9928024be78..790abadd816c 100644 --- a/drivers/pci/hotplug/cpcihp_zt5550.c +++ b/drivers/pci/hotplug/cpcihp_zt5550.c @@ -78,11 +78,20 @@ static void __iomem *csr_int_mask; static int zt5550_hc_config(struct pci_dev *pdev) { + int ret; + /* Since we know that no boards exist with two HC chips, treat it as an error */ if(hc_dev) { err("too many host controller devices?"); return -EBUSY; } + + ret = pci_enable_device(pdev); + if(ret) { + err("cannot enable %s\n", pci_name(pdev)); + return ret; + } + hc_dev = pdev; dbg("hc_dev = %p", hc_dev); dbg("pci resource start %lx", pci_resource_start(hc_dev, 1)); @@ -91,7 +100,8 @@ static int zt5550_hc_config(struct pci_dev *pdev) if(!request_mem_region(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1), MY_NAME)) { err("cannot reserve MMIO region"); - return -ENOMEM; + ret = -ENOMEM; + goto exit_disable_device; } hc_registers = @@ -99,9 +109,8 @@ static int zt5550_hc_config(struct pci_dev *pdev) if(!hc_registers) { err("cannot remap MMIO region %lx @ %lx", pci_resource_len(hc_dev, 1), pci_resource_start(hc_dev, 1)); - release_mem_region(pci_resource_start(hc_dev, 1), - pci_resource_len(hc_dev, 1)); - return -ENODEV; + ret = -ENODEV; + goto exit_release_region; } csr_hc_index = hc_registers + CSR_HCINDEX; @@ -124,6 +133,13 @@ static int zt5550_hc_config(struct pci_dev *pdev) writeb((u8) ALL_DIRECT_INTS_MASK, csr_int_mask); dbg("disabled timer0, timer1 and ENUM interrupts"); return 0; + +exit_release_region: + release_mem_region(pci_resource_start(hc_dev, 1), + pci_resource_len(hc_dev, 1)); +exit_disable_device: + pci_disable_device(hc_dev); + return ret; } static int zt5550_hc_cleanup(void) @@ -134,6 +150,7 @@ static int zt5550_hc_cleanup(void) iounmap(hc_registers); release_mem_region(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1)); + pci_disable_device(hc_dev); return 0; } -- GitLab From fe89cf4c4b7a3d9a0ff95eb0506aa7c9baaccda1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 28 Sep 2005 14:03:08 -0600 Subject: [PATCH 0721/1519] [PATCH] cpqphp: add pci_enable_device() Add pci_{enable,disable}_device() calls. Without pci_enable_device(), dev->irq is garbage, and cpqphp relies on it. This fixes a problem reported by Bruno Redondi. He reported a flood of ACPI interrupts, that caused kacpid to run 100% of the time: http://bugzilla.kernel.org/show_bug.cgi?id=5312 Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman drivers/pci/hotplug/cpqphp_core.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) --- drivers/pci/hotplug/cpqphp_core.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 8c6d3987d461..9aed8efe6a11 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -794,12 +794,21 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) u32 rc; struct controller *ctrl; struct pci_func *func; + int err; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n", + pci_name(pdev), err); + return err; + } // Need to read VID early b/c it's used to differentiate CPQ and INTC discovery rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id); if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) { err(msg_HPC_non_compaq_or_intel); - return -ENODEV; + rc = -ENODEV; + goto err_disable_device; } dbg("Vendor ID: %x\n", vendor_id); @@ -807,7 +816,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dbg("revision: %d\n", rev); if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) { err(msg_HPC_rev_error); - return -ENODEV; + rc = -ENODEV; + goto err_disable_device; } /* Check for the proper subsytem ID's @@ -820,18 +830,20 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid); if (rc) { err("%s : pci_read_config_word failed\n", __FUNCTION__); - return rc; + goto err_disable_device; } dbg("Subsystem Vendor ID: %x\n", subsystem_vid); if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) { err(msg_HPC_non_compaq_or_intel); - return -ENODEV; + rc = -ENODEV; + goto err_disable_device; } ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL); if (!ctrl) { err("%s : out of memory\n", __FUNCTION__); - return -ENOMEM; + rc = -ENOMEM; + goto err_disable_device; } memset(ctrl, 0, sizeof(struct controller)); @@ -1264,6 +1276,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) kfree(ctrl->pci_bus); err_free_ctrl: kfree(ctrl); +err_disable_device: + pci_disable_device(pdev); return rc; } -- GitLab From acc06632e387fd05d2bf3480f6a2f4d1a62734b8 Mon Sep 17 00:00:00 2001 From: "R.Marek@sh.cvut.cz" Date: Thu, 29 Sep 2005 08:35:41 +0000 Subject: [PATCH 0722/1519] [PATCH] unhide ICH6 SMBus - take 2 This patch unhides hidden SMBus on ICH6 chipset installed in Asus M6V notebook. I would like to thank Michal Mleczko for testing and help. Signed-Off-By: Rudolf Marek Signed-off-by: Greg Kroah-Hartman drivers/pci/quirks.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) --- drivers/pci/quirks.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 0663428a0e64..e1bd169cf55c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -934,6 +934,12 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) case 0x186a: /* M6Ne notebook */ asus_hides_smbus = 1; } + if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) { + switch (dev->subsystem_device) { + case 0x1882: /* M6V notebook */ + asus_hides_smbus = 1; + } + } } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) switch(dev->subsystem_device) { @@ -978,6 +984,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge ); static void __init asus_hides_smbus_lpc(struct pci_dev *dev) { @@ -1002,6 +1009,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, as DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc ); +static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev) +{ + u32 val, rcba; + void __iomem *base; + + if (likely(!asus_hides_smbus)) + return; + pci_read_config_dword(dev, 0xF0, &rcba); + base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); /* use bits 31:14, 16 kB aligned */ + if (base == NULL) return; + val=readl(base + 0x3418); /* read the Function Disable register, dword mode only */ + writel(val & 0xFFFFFFF7, base + 0x3418); /* enable the SMBus device */ + iounmap(base); + printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 ); + /* * SiS 96x south bridge: BIOS typically hides SMBus device... */ -- GitLab From b135c4815051bad6b2472e4ad0152f205918d2c5 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Thu, 29 Sep 2005 10:39:46 +1000 Subject: [PATCH 0723/1519] [PATCH] pci_ids: remove duplicates from pci_ids.h pci_ids.h cleanup: remove duplicated entries and change some defines to explicit value rather than in terms of another constant, preparation for removing unused symbols Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman include/linux/pci_ids.h | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-) --- include/linux/pci_ids.h | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 71834f05504f..0631074954f7 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -274,7 +274,6 @@ #define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050 #define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051 #define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052 -#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452 #define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053 #define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054 #define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055 @@ -517,16 +516,16 @@ #define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413 #define PCI_DEVICE_ID_AMD_VIPER_7414 0x7414 #define PCI_DEVICE_ID_AMD_OPUS_7440 0x7440 -# define PCI_DEVICE_ID_AMD_VIPER_7440 PCI_DEVICE_ID_AMD_OPUS_7440 +#define PCI_DEVICE_ID_AMD_VIPER_7440 0x7440 #define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441 -# define PCI_DEVICE_ID_AMD_VIPER_7441 PCI_DEVICE_ID_AMD_OPUS_7441 +#define PCI_DEVICE_ID_AMD_VIPER_7441 0x7441 #define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443 -# define PCI_DEVICE_ID_AMD_VIPER_7443 PCI_DEVICE_ID_AMD_OPUS_7443 +#define PCI_DEVICE_ID_AMD_VIPER_7443 0x7443 #define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445 #define PCI_DEVICE_ID_AMD_OPUS_7448 0x7448 -# define PCI_DEVICE_ID_AMD_VIPER_7448 PCI_DEVICE_ID_AMD_OPUS_7448 +#define PCI_DEVICE_ID_AMD_VIPER_7448 0x7448 #define PCI_DEVICE_ID_AMD_OPUS_7449 0x7449 -# define PCI_DEVICE_ID_AMD_VIPER_7449 PCI_DEVICE_ID_AMD_OPUS_7449 +#define PCI_DEVICE_ID_AMD_VIPER_7449 0x7449 #define PCI_DEVICE_ID_AMD_8111_LAN 0x7462 #define PCI_DEVICE_ID_AMD_8111_LPC 0x7468 #define PCI_DEVICE_ID_AMD_8111_IDE 0x7469 @@ -585,7 +584,6 @@ #define PCI_DEVICE_ID_CT_65550 0x00e0 #define PCI_DEVICE_ID_CT_65554 0x00e4 #define PCI_DEVICE_ID_CT_65555 0x00e5 -#define PCI_DEVICE_ID_CT_69000 0x00c0 #define PCI_VENDOR_ID_MIRO 0x1031 #define PCI_DEVICE_ID_MIRO_36050 0x5601 @@ -1197,7 +1195,6 @@ #define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc #define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce #define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1 -#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da #define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5 #define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6 @@ -1623,7 +1620,7 @@ #define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214 #define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217 #define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220 -#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB +#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB 0x0220 #define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221 #define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227 #define PCI_DEVICE_ID_SERVERWORKS_GCLE 0x0225 @@ -1792,10 +1789,6 @@ #define PCI_DEVICE_ID_PC300_TE_M_2 0x0320 #define PCI_DEVICE_ID_PC300_TE_M_1 0x0321 -/* Allied Telesyn */ -#define PCI_VENDOR_ID_AT 0x1259 -#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703 - #define PCI_VENDOR_ID_ESSENTIAL 0x120f #define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001 @@ -2340,16 +2333,13 @@ #define PCI_VENDOR_ID_DUNORD 0x5544 #define PCI_DEVICE_ID_DUNORD_I3000 0x0001 +#define PCI_VENDOR_ID_GENROCO 0x5555 +#define PCI_DEVICE_ID_GENROCO_HFP832 0x0003 + #define PCI_VENDOR_ID_DCI 0x6666 #define PCI_DEVICE_ID_DCI_PCCOM4 0x0001 #define PCI_DEVICE_ID_DCI_PCCOM8 0x0002 -#define PCI_VENDOR_ID_DUNORD 0x5544 -#define PCI_DEVICE_ID_DUNORD_I3000 0x0001 - -#define PCI_VENDOR_ID_GENROCO 0x5555 -#define PCI_DEVICE_ID_GENROCO_HFP832 0x0003 - #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_EESSC 0x0008 #define PCI_DEVICE_ID_INTEL_21145 0x0039 -- GitLab From 4153812fc10ea91cb1a7b6ea4f4337dd211c1ef7 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Thu, 29 Sep 2005 10:40:52 +1000 Subject: [PATCH 0724/1519] [PATCH] pci_ids: macros: replace partial with whole symbols pci_ids cleanup: replace symbols built by macros with whole symbols to aid grep searches. Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman drivers/video/cirrusfb.c | 24 ++++++++++++------------ sound/oss/ymfpci.c | 17 +++++++++-------- sound/pci/bt87x.c | 11 +++++++---- 3 files changed, 28 insertions(+), 24 deletions(-) --- drivers/video/cirrusfb.c | 24 ++++++++++++------------ sound/oss/ymfpci.c | 17 +++++++++-------- sound/pci/bt87x.c | 11 +++++++---- 3 files changed, 28 insertions(+), 24 deletions(-) diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index a3040429c27b..3a26f9cc8585 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -275,20 +275,20 @@ static const struct cirrusfb_board_info_rec { #ifdef CONFIG_PCI #define CHIP(id, btype) \ - { PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_##id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (btype) } + { PCI_VENDOR_ID_CIRRUS, id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (btype) } static struct pci_device_id cirrusfb_pci_table[] = { - CHIP( CIRRUS_5436, BT_ALPINE ), - CHIP( CIRRUS_5434_8, BT_ALPINE ), - CHIP( CIRRUS_5434_4, BT_ALPINE ), - CHIP( CIRRUS_5430, BT_ALPINE ), /* GD-5440 has identical id */ - CHIP( CIRRUS_7543, BT_ALPINE ), - CHIP( CIRRUS_7548, BT_ALPINE ), - CHIP( CIRRUS_5480, BT_GD5480 ), /* MacPicasso probably */ - CHIP( CIRRUS_5446, BT_PICASSO4 ), /* Picasso 4 is a GD5446 */ - CHIP( CIRRUS_5462, BT_LAGUNA ), /* CL Laguna */ - CHIP( CIRRUS_5464, BT_LAGUNA ), /* CL Laguna 3D */ - CHIP( CIRRUS_5465, BT_LAGUNA ), /* CL Laguna 3DA*/ + CHIP( PCI_DEVICE_ID_CIRRUS_5436, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_5434_8, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_5434_4, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_5430, BT_ALPINE ), /* GD-5440 is same id */ + CHIP( PCI_DEVICE_ID_CIRRUS_7543, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_7548, BT_ALPINE ), + CHIP( PCI_DEVICE_ID_CIRRUS_5480, BT_GD5480 ), /* MacPicasso likely */ + CHIP( PCI_DEVICE_ID_CIRRUS_5446, BT_PICASSO4 ), /* Picasso 4 is 5446 */ + CHIP( PCI_DEVICE_ID_CIRRUS_5462, BT_LAGUNA ), /* CL Laguna */ + CHIP( PCI_DEVICE_ID_CIRRUS_5464, BT_LAGUNA ), /* CL Laguna 3D */ + CHIP( PCI_DEVICE_ID_CIRRUS_5465, BT_LAGUNA ), /* CL Laguna 3DA*/ { 0, } }; MODULE_DEVICE_TABLE(pci, cirrusfb_pci_table); diff --git a/sound/oss/ymfpci.c b/sound/oss/ymfpci.c index 05203ad523f7..8dae59bd05a2 100644 --- a/sound/oss/ymfpci.c +++ b/sound/oss/ymfpci.c @@ -107,14 +107,15 @@ static LIST_HEAD(ymf_devs); */ static struct pci_device_id ymf_id_tbl[] = { -#define DEV(v, d, data) \ - { PCI_VENDOR_ID_##v, PCI_DEVICE_ID_##v##_##d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long)data } - DEV (YAMAHA, 724, "YMF724"), - DEV (YAMAHA, 724F, "YMF724F"), - DEV (YAMAHA, 740, "YMF740"), - DEV (YAMAHA, 740C, "YMF740C"), - DEV (YAMAHA, 744, "YMF744"), - DEV (YAMAHA, 754, "YMF754"), +#define DEV(dev, data) \ + { PCI_VENDOR_ID_YAMAHA, dev, PCI_ANY_ID, PCI_ANY_ID, 0, 0, \ + (unsigned long)data } + DEV (PCI_DEVICE_ID_YAMAHA_724, "YMF724"), + DEV (PCI_DEVICE_ID_YAMAHA_724F, "YMF724F"), + DEV (PCI_DEVICE_ID_YAMAHA_740, "YMF740"), + DEV (PCI_DEVICE_ID_YAMAHA_740C, "YMF740C"), + DEV (PCI_DEVICE_ID_YAMAHA_744, "YMF744"), + DEV (PCI_DEVICE_ID_YAMAHA_754, "YMF754"), #undef DEV { } }; diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index 2236c958aec0..01d98eeb242e 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -761,15 +761,18 @@ static int __devinit snd_bt87x_create(snd_card_t *card, #define BT_DEVICE(chip, subvend, subdev, rate) \ { .vendor = PCI_VENDOR_ID_BROOKTREE, \ - .device = PCI_DEVICE_ID_BROOKTREE_##chip, \ + .device = chip, \ .subvendor = subvend, .subdevice = subdev, \ .driver_data = rate } /* driver_data is the default digital_rate value for that device */ static struct pci_device_id snd_bt87x_ids[] = { - BT_DEVICE(878, 0x0070, 0x13eb, 32000), /* Hauppauge WinTV series */ - BT_DEVICE(879, 0x0070, 0x13eb, 32000), /* Hauppauge WinTV series */ - BT_DEVICE(878, 0x0070, 0xff01, 44100), /* Viewcast Osprey 200 */ + /* Hauppauge WinTV series */ + BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0x13eb, 32000), + /* Hauppauge WinTV series */ + BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_879, 0x0070, 0x13eb, 32000), + /* Viewcast Osprey 200 */ + BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0xff01, 44100), { } }; MODULE_DEVICE_TABLE(pci, snd_bt87x_ids); -- GitLab From b7924c38c9a9c6151213bc0d91776eace614e761 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Thu, 29 Sep 2005 11:06:40 +1000 Subject: [PATCH 0725/1519] [PATCH] pci_ids: remove non-referenced symbols from pci_ids.h pci_ids.h cleanup: removed non-referenced symbols, compile tested with 'make allmodconfig' Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman include/linux/pci_ids.h | 540 ------------------------------------------------ 1 file changed, 540 deletions(-) --- include/linux/pci_ids.h | 540 ---------------------------------------- 1 file changed, 540 deletions(-) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 0631074954f7..11fed60a928d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -132,9 +132,6 @@ #define PCI_VENDOR_ID_COMPAQ 0x0e11 #define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508 -#define PCI_DEVICE_ID_COMPAQ_1280 0x3033 -#define PCI_DEVICE_ID_COMPAQ_TRIFLEX 0x4000 -#define PCI_DEVICE_ID_COMPAQ_6010 0x6010 #define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc #define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10 #define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32 @@ -281,8 +278,6 @@ #define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057 #define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058 /* Rage128 M4 */ -#define PCI_DEVICE_ID_ATI_RADEON_LE 0x4d45 -#define PCI_DEVICE_ID_ATI_RADEON_LF 0x4d46 /* Radeon R100 */ #define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144 #define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145 @@ -303,32 +298,22 @@ #define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157 #define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158 /* Radeon NV-100 */ -#define PCI_DEVICE_ID_ATI_RADEON_N1 0x5159 -#define PCI_DEVICE_ID_ATI_RADEON_N2 0x515a /* Radeon RV250 (9000) */ #define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964 #define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965 #define PCI_DEVICE_ID_ATI_RADEON_If 0x4966 #define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967 /* Radeon RV280 (9200) */ -#define PCI_DEVICE_ID_ATI_RADEON_Y_ 0x5960 #define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961 #define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964 /* Radeon R300 (9500) */ -#define PCI_DEVICE_ID_ATI_RADEON_AD 0x4144 /* Radeon R300 (9700) */ #define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44 #define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45 #define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46 #define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47 -#define PCI_DEVICE_ID_ATI_RADEON_AE 0x4145 -#define PCI_DEVICE_ID_ATI_RADEON_AF 0x4146 /* Radeon R350 (9800) */ -#define PCI_DEVICE_ID_ATI_RADEON_NH 0x4e48 -#define PCI_DEVICE_ID_ATI_RADEON_NI 0x4e49 /* Radeon RV350 (9600) */ -#define PCI_DEVICE_ID_ATI_RADEON_AP 0x4150 -#define PCI_DEVICE_ID_ATI_RADEON_AR 0x4152 /* Radeon M6 */ #define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59 #define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a @@ -341,10 +326,6 @@ #define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66 #define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67 /* Radeon */ -#define PCI_DEVICE_ID_ATI_RADEON_RA 0x5144 -#define PCI_DEVICE_ID_ATI_RADEON_RB 0x5145 -#define PCI_DEVICE_ID_ATI_RADEON_RC 0x5146 -#define PCI_DEVICE_ID_ATI_RADEON_RD 0x5147 /* RadeonIGP */ #define PCI_DEVICE_ID_ATI_RS100 0xcab0 #define PCI_DEVICE_ID_ATI_RS200 0xcab2 @@ -445,34 +426,18 @@ #define PCI_DEVICE_ID_CIRRUS_5465 0x00d6 #define PCI_DEVICE_ID_CIRRUS_6729 0x1100 #define PCI_DEVICE_ID_CIRRUS_6832 0x1110 -#define PCI_DEVICE_ID_CIRRUS_7542 0x1200 #define PCI_DEVICE_ID_CIRRUS_7543 0x1202 -#define PCI_DEVICE_ID_CIRRUS_7541 0x1204 #define PCI_DEVICE_ID_CIRRUS_4610 0x6001 #define PCI_DEVICE_ID_CIRRUS_4612 0x6003 #define PCI_DEVICE_ID_CIRRUS_4615 0x6004 -#define PCI_DEVICE_ID_CIRRUS_4281 0x6005 #define PCI_VENDOR_ID_IBM 0x1014 -#define PCI_DEVICE_ID_IBM_FIRE_CORAL 0x000a #define PCI_DEVICE_ID_IBM_TR 0x0018 -#define PCI_DEVICE_ID_IBM_82G2675 0x001d -#define PCI_DEVICE_ID_IBM_MCA 0x0020 -#define PCI_DEVICE_ID_IBM_82351 0x0022 -#define PCI_DEVICE_ID_IBM_PYTHON 0x002d -#define PCI_DEVICE_ID_IBM_SERVERAID 0x002e #define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e -#define PCI_DEVICE_ID_IBM_MPIC 0x0046 -#define PCI_DEVICE_ID_IBM_3780IDSP 0x007d -#define PCI_DEVICE_ID_IBM_CHUKAR 0x0096 #define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc -#define PCI_DEVICE_ID_IBM_CPC710_PCI32 0x0105 -#define PCI_DEVICE_ID_IBM_405GP 0x0156 #define PCI_DEVICE_ID_IBM_SNIPE 0x0180 -#define PCI_DEVICE_ID_IBM_SERVERAIDI960 0x01bd #define PCI_DEVICE_ID_IBM_CITRINE 0x028C #define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166 -#define PCI_DEVICE_ID_IBM_MPIC_2 0xffff #define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031 #define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219 #define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A @@ -483,7 +448,6 @@ #define PCI_DEVICE_ID_COMPEX2_100VG 0x0005 #define PCI_VENDOR_ID_WD 0x101c -#define PCI_DEVICE_ID_WD_7197 0x3296 #define PCI_DEVICE_ID_WD_90C 0xc24a #define PCI_VENDOR_ID_AMI 0x101e @@ -500,33 +464,18 @@ #define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006 #define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007 #define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C -#define PCI_DEVICE_ID_AMD_FE_GATE_700D 0x700D #define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E -#define PCI_DEVICE_ID_AMD_FE_GATE_700F 0x700F -#define PCI_DEVICE_ID_AMD_COBRA_7400 0x7400 #define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401 -#define PCI_DEVICE_ID_AMD_COBRA_7403 0x7403 -#define PCI_DEVICE_ID_AMD_COBRA_7404 0x7404 -#define PCI_DEVICE_ID_AMD_VIPER_7408 0x7408 #define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409 #define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B -#define PCI_DEVICE_ID_AMD_VIPER_740C 0x740C #define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410 #define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411 #define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413 -#define PCI_DEVICE_ID_AMD_VIPER_7414 0x7414 -#define PCI_DEVICE_ID_AMD_OPUS_7440 0x7440 #define PCI_DEVICE_ID_AMD_VIPER_7440 0x7440 #define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441 -#define PCI_DEVICE_ID_AMD_VIPER_7441 0x7441 #define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443 #define PCI_DEVICE_ID_AMD_VIPER_7443 0x7443 #define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445 -#define PCI_DEVICE_ID_AMD_OPUS_7448 0x7448 -#define PCI_DEVICE_ID_AMD_VIPER_7448 0x7448 -#define PCI_DEVICE_ID_AMD_OPUS_7449 0x7449 -#define PCI_DEVICE_ID_AMD_VIPER_7449 0x7449 -#define PCI_DEVICE_ID_AMD_8111_LAN 0x7462 #define PCI_DEVICE_ID_AMD_8111_LPC 0x7468 #define PCI_DEVICE_ID_AMD_8111_IDE 0x7469 #define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a @@ -637,7 +586,6 @@ #define PCI_DEVICE_ID_SI_550 0x0550 #define PCI_DEVICE_ID_SI_540_VGA 0x5300 #define PCI_DEVICE_ID_SI_550_VGA 0x5315 -#define PCI_DEVICE_ID_SI_601 0x0601 #define PCI_DEVICE_ID_SI_620 0x0620 #define PCI_DEVICE_ID_SI_630 0x0630 #define PCI_DEVICE_ID_SI_633 0x0633 @@ -648,30 +596,22 @@ #define PCI_DEVICE_ID_SI_648 0x0648 #define PCI_DEVICE_ID_SI_650 0x0650 #define PCI_DEVICE_ID_SI_651 0x0651 -#define PCI_DEVICE_ID_SI_652 0x0652 #define PCI_DEVICE_ID_SI_655 0x0655 #define PCI_DEVICE_ID_SI_661 0x0661 #define PCI_DEVICE_ID_SI_730 0x0730 #define PCI_DEVICE_ID_SI_733 0x0733 #define PCI_DEVICE_ID_SI_630_VGA 0x6300 -#define PCI_DEVICE_ID_SI_730_VGA 0x7300 #define PCI_DEVICE_ID_SI_735 0x0735 #define PCI_DEVICE_ID_SI_740 0x0740 #define PCI_DEVICE_ID_SI_741 0x0741 #define PCI_DEVICE_ID_SI_745 0x0745 #define PCI_DEVICE_ID_SI_746 0x0746 -#define PCI_DEVICE_ID_SI_748 0x0748 -#define PCI_DEVICE_ID_SI_750 0x0750 -#define PCI_DEVICE_ID_SI_751 0x0751 -#define PCI_DEVICE_ID_SI_752 0x0752 #define PCI_DEVICE_ID_SI_755 0x0755 #define PCI_DEVICE_ID_SI_760 0x0760 #define PCI_DEVICE_ID_SI_900 0x0900 #define PCI_DEVICE_ID_SI_961 0x0961 #define PCI_DEVICE_ID_SI_962 0x0962 #define PCI_DEVICE_ID_SI_963 0x0963 -#define PCI_DEVICE_ID_SI_5107 0x5107 -#define PCI_DEVICE_ID_SI_5300 0x5300 #define PCI_DEVICE_ID_SI_5511 0x5511 #define PCI_DEVICE_ID_SI_5513 0x5513 #define PCI_DEVICE_ID_SI_5518 0x5518 @@ -683,10 +623,6 @@ #define PCI_DEVICE_ID_SI_5597 0x5597 #define PCI_DEVICE_ID_SI_5598 0x5598 #define PCI_DEVICE_ID_SI_5600 0x5600 -#define PCI_DEVICE_ID_SI_6300 0x6300 -#define PCI_DEVICE_ID_SI_6306 0x6306 -#define PCI_DEVICE_ID_SI_6326 0x6326 -#define PCI_DEVICE_ID_SI_7001 0x7001 #define PCI_DEVICE_ID_SI_7012 0x7012 #define PCI_DEVICE_ID_SI_7013 0x7013 #define PCI_DEVICE_ID_SI_7016 0x7016 @@ -707,14 +643,11 @@ #define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049 #define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A #define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B -#define PCI_DEVICE_ID_HP_PCI_LBA 0x1054 -#define PCI_DEVICE_ID_HP_REO_SBA 0x10f0 #define PCI_DEVICE_ID_HP_REO_IOC 0x10f1 #define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b #define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223 #define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226 #define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227 -#define PCI_DEVICE_ID_HP_ZX1_SBA 0x1229 #define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a #define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e #define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c @@ -722,9 +655,7 @@ #define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290 #define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301 #define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a -#define PCI_DEVICE_ID_HP_CISS 0x3210 #define PCI_DEVICE_ID_HP_CISSA 0x3220 -#define PCI_DEVICE_ID_HP_CISSB 0x3222 #define PCI_DEVICE_ID_HP_CISSC 0x3230 #define PCI_DEVICE_ID_HP_CISSD 0x3238 #define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 @@ -732,8 +663,6 @@ #define PCI_VENDOR_ID_PCTECH 0x1042 #define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000 #define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001 -#define PCI_DEVICE_ID_PCTECH_SAMURAI_0 0x3000 -#define PCI_DEVICE_ID_PCTECH_SAMURAI_1 0x3010 #define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020 #define PCI_VENDOR_ID_ASUSTEK 0x1043 @@ -743,24 +672,15 @@ #define PCI_DEVICE_ID_DPT 0xa400 #define PCI_VENDOR_ID_OPTI 0x1045 -#define PCI_DEVICE_ID_OPTI_92C178 0xc178 -#define PCI_DEVICE_ID_OPTI_82C557 0xc557 #define PCI_DEVICE_ID_OPTI_82C558 0xc558 #define PCI_DEVICE_ID_OPTI_82C621 0xc621 #define PCI_DEVICE_ID_OPTI_82C700 0xc700 -#define PCI_DEVICE_ID_OPTI_82C701 0xc701 -#define PCI_DEVICE_ID_OPTI_82C814 0xc814 -#define PCI_DEVICE_ID_OPTI_82C822 0xc822 -#define PCI_DEVICE_ID_OPTI_82C861 0xc861 #define PCI_DEVICE_ID_OPTI_82C825 0xd568 #define PCI_VENDOR_ID_ELSA 0x1048 #define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000 #define PCI_DEVICE_ID_ELSA_QS3000 0x3000 -#define PCI_VENDOR_ID_SGS 0x104a -#define PCI_DEVICE_ID_SGS_2000 0x0008 -#define PCI_DEVICE_ID_SGS_1764 0x0009 #define PCI_VENDOR_ID_BUSLOGIC 0x104B #define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140 @@ -768,7 +688,6 @@ #define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130 #define PCI_VENDOR_ID_TI 0x104c -#define PCI_DEVICE_ID_TI_TVP4010 0x3d04 #define PCI_DEVICE_ID_TI_TVP4020 0x3d07 #define PCI_DEVICE_ID_TI_4450 0x8011 #define PCI_DEVICE_ID_TI_XX21_XX11 0x8031 @@ -802,14 +721,10 @@ #define PCI_DEVICE_ID_TI_X420 0xac8e #define PCI_VENDOR_ID_SONY 0x104d -#define PCI_DEVICE_ID_SONY_CXD3222 0x8039 -#define PCI_VENDOR_ID_OAK 0x104e -#define PCI_DEVICE_ID_OAK_OTI107 0x0107 /* Winbond have two vendor IDs! See 0x10ad as well */ #define PCI_VENDOR_ID_WINBOND2 0x1050 -#define PCI_DEVICE_ID_WINBOND2_89C940 0x0940 #define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a #define PCI_DEVICE_ID_WINBOND2_6692 0x6692 @@ -818,19 +733,15 @@ #define PCI_VENDOR_ID_EFAR 0x1055 #define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130 -#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 -#define PCI_DEVICE_ID_EFAR_SLC90E66_2 0x9462 #define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463 #define PCI_VENDOR_ID_MOTOROLA 0x1057 -#define PCI_VENDOR_ID_MOTOROLA_OOPS 0x1507 #define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001 #define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002 #define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004 #define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801 #define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802 #define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803 -#define PCI_DEVICE_ID_MOTOROLA_CPX8216 0x4806 #define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b #define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803 @@ -841,33 +752,19 @@ #define PCI_DEVICE_ID_PROMISE_20262 0x4d38 #define PCI_DEVICE_ID_PROMISE_20263 0x0D38 #define PCI_DEVICE_ID_PROMISE_20268 0x4d68 -#define PCI_DEVICE_ID_PROMISE_20268R 0x6268 #define PCI_DEVICE_ID_PROMISE_20269 0x4d69 #define PCI_DEVICE_ID_PROMISE_20270 0x6268 #define PCI_DEVICE_ID_PROMISE_20271 0x6269 #define PCI_DEVICE_ID_PROMISE_20275 0x1275 #define PCI_DEVICE_ID_PROMISE_20276 0x5275 #define PCI_DEVICE_ID_PROMISE_20277 0x7275 -#define PCI_DEVICE_ID_PROMISE_5300 0x5300 -#define PCI_VENDOR_ID_N9 0x105d -#define PCI_DEVICE_ID_N9_I128 0x2309 -#define PCI_DEVICE_ID_N9_I128_2 0x2339 -#define PCI_DEVICE_ID_N9_I128_T2R 0x493d #define PCI_VENDOR_ID_UMC 0x1060 #define PCI_DEVICE_ID_UMC_UM8673F 0x0101 -#define PCI_DEVICE_ID_UMC_UM8891A 0x0891 #define PCI_DEVICE_ID_UMC_UM8886BF 0x673a #define PCI_DEVICE_ID_UMC_UM8886A 0x886a -#define PCI_DEVICE_ID_UMC_UM8881F 0x8881 -#define PCI_DEVICE_ID_UMC_UM8886F 0x8886 -#define PCI_DEVICE_ID_UMC_UM9017F 0x9017 -#define PCI_DEVICE_ID_UMC_UM8886N 0xe886 -#define PCI_DEVICE_ID_UMC_UM8891N 0xe891 -#define PCI_VENDOR_ID_X 0x1061 -#define PCI_DEVICE_ID_X_AGX016 0x0001 #define PCI_VENDOR_ID_MYLEX 0x1069 #define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001 @@ -878,37 +775,26 @@ #define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56 #define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166 -#define PCI_VENDOR_ID_PICOP 0x1066 -#define PCI_DEVICE_ID_PICOP_PT86C52X 0x0001 -#define PCI_DEVICE_ID_PICOP_PT80C524 0x8002 #define PCI_VENDOR_ID_APPLE 0x106b #define PCI_DEVICE_ID_APPLE_BANDIT 0x0001 -#define PCI_DEVICE_ID_APPLE_GC 0x0002 #define PCI_DEVICE_ID_APPLE_HYDRA 0x000e #define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018 -#define PCI_DEVICE_ID_APPLE_KL_USB 0x0019 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020 #define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021 -#define PCI_DEVICE_ID_APPLE_KEYLARGO 0x0022 #define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024 -#define PCI_DEVICE_ID_APPLE_KEYLARGO_P 0x0025 -#define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d #define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e -#define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030 #define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032 #define PCI_DEVICE_ID_APPLE_UNI_N_ATA 0x0033 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034 #define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b -#define PCI_DEVICE_ID_APPLE_KEYLARGO_I 0x003e #define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043 #define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b #define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c #define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050 #define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051 -#define PCI_DEVICE_ID_APPLE_SH_FW 0x0052 #define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058 #define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059 #define PCI_DEVICE_ID_APPLE_TIGON3 0x1645 @@ -921,12 +807,9 @@ #define PCI_DEVICE_ID_YAMAHA_744 0x0010 #define PCI_DEVICE_ID_YAMAHA_754 0x0012 -#define PCI_VENDOR_ID_NEXGEN 0x1074 -#define PCI_DEVICE_ID_NEXGEN_82C501 0x4e78 #define PCI_VENDOR_ID_QLOGIC 0x1077 #define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020 -#define PCI_DEVICE_ID_QLOGIC_ISP1022 0x1022 #define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100 #define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200 #define PCI_DEVICE_ID_QLOGIC_ISP2300 0x2300 @@ -944,32 +827,20 @@ #define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001 #define PCI_DEVICE_ID_CYRIX_5520 0x0002 #define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100 -#define PCI_DEVICE_ID_CYRIX_5530_SMI 0x0101 #define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102 #define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103 #define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104 -#define PCI_VENDOR_ID_LEADTEK 0x107d -#define PCI_DEVICE_ID_LEADTEK_805 0x0000 -#define PCI_VENDOR_ID_INTERPHASE 0x107e -#define PCI_DEVICE_ID_INTERPHASE_5526 0x0004 -#define PCI_DEVICE_ID_INTERPHASE_55x6 0x0005 -#define PCI_DEVICE_ID_INTERPHASE_5575 0x0008 #define PCI_VENDOR_ID_CONTAQ 0x1080 -#define PCI_DEVICE_ID_CONTAQ_82C599 0x0600 #define PCI_DEVICE_ID_CONTAQ_82C693 0xc693 -#define PCI_VENDOR_ID_FOREX 0x1083 #define PCI_VENDOR_ID_OLICOM 0x108d -#define PCI_DEVICE_ID_OLICOM_OC3136 0x0001 -#define PCI_DEVICE_ID_OLICOM_OC2315 0x0011 #define PCI_DEVICE_ID_OLICOM_OC2325 0x0012 #define PCI_DEVICE_ID_OLICOM_OC2183 0x0013 #define PCI_DEVICE_ID_OLICOM_OC2326 0x0014 -#define PCI_DEVICE_ID_OLICOM_OC6151 0x0021 #define PCI_VENDOR_ID_SUN 0x108e #define PCI_DEVICE_ID_SUN_EBUS 0x1000 @@ -988,49 +859,31 @@ #define PCI_DEVICE_ID_SUN_CASSINI 0xabba #define PCI_VENDOR_ID_CMD 0x1095 -#define PCI_DEVICE_ID_CMD_640 0x0640 #define PCI_DEVICE_ID_CMD_643 0x0643 #define PCI_DEVICE_ID_CMD_646 0x0646 -#define PCI_DEVICE_ID_CMD_647 0x0647 #define PCI_DEVICE_ID_CMD_648 0x0648 #define PCI_DEVICE_ID_CMD_649 0x0649 -#define PCI_DEVICE_ID_CMD_670 0x0670 -#define PCI_DEVICE_ID_CMD_680 0x0680 #define PCI_DEVICE_ID_SII_680 0x0680 #define PCI_DEVICE_ID_SII_3112 0x3112 #define PCI_DEVICE_ID_SII_1210SA 0x0240 -#define PCI_VENDOR_ID_VISION 0x1098 -#define PCI_DEVICE_ID_VISION_QD8500 0x0001 -#define PCI_DEVICE_ID_VISION_QD8580 0x0002 #define PCI_VENDOR_ID_BROOKTREE 0x109e -#define PCI_DEVICE_ID_BROOKTREE_848 0x0350 -#define PCI_DEVICE_ID_BROOKTREE_849A 0x0351 -#define PCI_DEVICE_ID_BROOKTREE_878_1 0x036e #define PCI_DEVICE_ID_BROOKTREE_878 0x0878 #define PCI_DEVICE_ID_BROOKTREE_879 0x0879 -#define PCI_DEVICE_ID_BROOKTREE_8474 0x8474 -#define PCI_VENDOR_ID_SIERRA 0x10a8 -#define PCI_DEVICE_ID_SIERRA_STB 0x0000 #define PCI_VENDOR_ID_SGI 0x10a9 #define PCI_DEVICE_ID_SGI_IOC3 0x0003 #define PCI_DEVICE_ID_SGI_IOC4 0x100a #define PCI_VENDOR_ID_SGI_LITHIUM 0x1002 -#define PCI_VENDOR_ID_ACC 0x10aa -#define PCI_DEVICE_ID_ACC_2056 0x0000 #define PCI_VENDOR_ID_WINBOND 0x10ad -#define PCI_DEVICE_ID_WINBOND_83769 0x0001 #define PCI_DEVICE_ID_WINBOND_82C105 0x0105 #define PCI_DEVICE_ID_WINBOND_83C553 0x0565 -#define PCI_VENDOR_ID_DATABOOK 0x10b3 -#define PCI_DEVICE_ID_DATABOOK_87144 0xb106 #define PCI_VENDOR_ID_PLX 0x10b5 #define PCI_DEVICE_ID_PLX_R685 0x1030 @@ -1041,33 +894,19 @@ #define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151 #define PCI_DEVICE_ID_PLX_R753 0x1152 #define PCI_DEVICE_ID_PLX_OLITEC 0x1187 -#define PCI_DEVICE_ID_PLX_9030 0x9030 #define PCI_DEVICE_ID_PLX_9050 0x9050 -#define PCI_DEVICE_ID_PLX_9060 0x9060 -#define PCI_DEVICE_ID_PLX_9060ES 0x906E -#define PCI_DEVICE_ID_PLX_9060SD 0x906D #define PCI_DEVICE_ID_PLX_9080 0x9080 #define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001 #define PCI_VENDOR_ID_MADGE 0x10b6 #define PCI_DEVICE_ID_MADGE_MK2 0x0002 -#define PCI_DEVICE_ID_MADGE_C155S 0x1001 #define PCI_VENDOR_ID_3COM 0x10b7 #define PCI_DEVICE_ID_3COM_3C985 0x0001 #define PCI_DEVICE_ID_3COM_3C940 0x1700 #define PCI_DEVICE_ID_3COM_3C339 0x3390 #define PCI_DEVICE_ID_3COM_3C359 0x3590 -#define PCI_DEVICE_ID_3COM_3C590 0x5900 -#define PCI_DEVICE_ID_3COM_3C595TX 0x5950 -#define PCI_DEVICE_ID_3COM_3C595T4 0x5951 -#define PCI_DEVICE_ID_3COM_3C595MII 0x5952 #define PCI_DEVICE_ID_3COM_3C940B 0x80eb -#define PCI_DEVICE_ID_3COM_3C900TPO 0x9000 -#define PCI_DEVICE_ID_3COM_3C900COMBO 0x9001 -#define PCI_DEVICE_ID_3COM_3C905TX 0x9050 -#define PCI_DEVICE_ID_3COM_3C905T4 0x9051 -#define PCI_DEVICE_ID_3COM_3C905B_TX 0x9055 #define PCI_DEVICE_ID_3COM_3CR990 0x9900 #define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902 #define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903 @@ -1077,24 +916,11 @@ #define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909 #define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a -#define PCI_VENDOR_ID_SMC 0x10b8 -#define PCI_DEVICE_ID_SMC_EPIC100 0x0005 #define PCI_VENDOR_ID_AL 0x10b9 -#define PCI_DEVICE_ID_AL_M1445 0x1445 -#define PCI_DEVICE_ID_AL_M1449 0x1449 -#define PCI_DEVICE_ID_AL_M1451 0x1451 -#define PCI_DEVICE_ID_AL_M1461 0x1461 -#define PCI_DEVICE_ID_AL_M1489 0x1489 -#define PCI_DEVICE_ID_AL_M1511 0x1511 -#define PCI_DEVICE_ID_AL_M1513 0x1513 -#define PCI_DEVICE_ID_AL_M1521 0x1521 -#define PCI_DEVICE_ID_AL_M1523 0x1523 -#define PCI_DEVICE_ID_AL_M1531 0x1531 #define PCI_DEVICE_ID_AL_M1533 0x1533 #define PCI_DEVICE_ID_AL_M1535 0x1535 #define PCI_DEVICE_ID_AL_M1541 0x1541 -#define PCI_DEVICE_ID_AL_M1543 0x1543 #define PCI_DEVICE_ID_AL_M1563 0x1563 #define PCI_DEVICE_ID_AL_M1621 0x1621 #define PCI_DEVICE_ID_AL_M1631 0x1631 @@ -1107,49 +933,23 @@ #define PCI_DEVICE_ID_AL_M1681 0x1681 #define PCI_DEVICE_ID_AL_M1683 0x1683 #define PCI_DEVICE_ID_AL_M1689 0x1689 -#define PCI_DEVICE_ID_AL_M3307 0x3307 -#define PCI_DEVICE_ID_AL_M4803 0x5215 #define PCI_DEVICE_ID_AL_M5219 0x5219 #define PCI_DEVICE_ID_AL_M5228 0x5228 #define PCI_DEVICE_ID_AL_M5229 0x5229 -#define PCI_DEVICE_ID_AL_M5237 0x5237 -#define PCI_DEVICE_ID_AL_M5243 0x5243 #define PCI_DEVICE_ID_AL_M5451 0x5451 #define PCI_DEVICE_ID_AL_M7101 0x7101 -#define PCI_VENDOR_ID_MITSUBISHI 0x10ba -#define PCI_VENDOR_ID_SURECOM 0x10bd -#define PCI_DEVICE_ID_SURECOM_NE34 0x0e34 #define PCI_VENDOR_ID_NEOMAGIC 0x10c8 -#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001 -#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002 -#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003 -#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004 -#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV 0x0005 -#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS 0x0083 #define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005 #define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006 #define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016 -#define PCI_VENDOR_ID_ASP 0x10cd -#define PCI_DEVICE_ID_ASP_ABP940 0x1200 -#define PCI_DEVICE_ID_ASP_ABP940U 0x1300 -#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300 - -#define PCI_VENDOR_ID_MACRONIX 0x10d9 -#define PCI_DEVICE_ID_MACRONIX_MX98713 0x0512 -#define PCI_DEVICE_ID_MACRONIX_MX987x5 0x0531 #define PCI_VENDOR_ID_TCONRAD 0x10da #define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508 -#define PCI_VENDOR_ID_CERN 0x10dc -#define PCI_DEVICE_ID_CERN_SPSB_PMC 0x0001 -#define PCI_DEVICE_ID_CERN_SPSB_PCI 0x0002 -#define PCI_DEVICE_ID_CERN_HIPPI_DST 0x0021 -#define PCI_DEVICE_ID_CERN_HIPPI_SRC 0x0022 #define PCI_VENDOR_ID_NVIDIA 0x10de #define PCI_DEVICE_ID_NVIDIA_TNT 0x0020 @@ -1281,7 +1081,6 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F #define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268 #define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269 -#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO 0x026B #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282 @@ -1332,24 +1131,13 @@ #define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373 #define PCI_VENDOR_ID_IMS 0x10e0 -#define PCI_DEVICE_ID_IMS_8849 0x8849 #define PCI_DEVICE_ID_IMS_TT128 0x9128 #define PCI_DEVICE_ID_IMS_TT3D 0x9135 -#define PCI_VENDOR_ID_TEKRAM2 0x10e1 -#define PCI_DEVICE_ID_TEKRAM2_690c 0x690c -#define PCI_VENDOR_ID_TUNDRA 0x10e3 -#define PCI_DEVICE_ID_TUNDRA_CA91C042 0x0000 -#define PCI_VENDOR_ID_AMCC 0x10e8 -#define PCI_DEVICE_ID_AMCC_MYRINET 0x8043 -#define PCI_DEVICE_ID_AMCC_PARASTATION 0x8062 -#define PCI_DEVICE_ID_AMCC_S5933 0x807d -#define PCI_DEVICE_ID_AMCC_S5933_HEPC3 0x809c #define PCI_VENDOR_ID_INTERG 0x10ea -#define PCI_DEVICE_ID_INTERG_1680 0x1680 #define PCI_DEVICE_ID_INTERG_1682 0x1682 #define PCI_DEVICE_ID_INTERG_2000 0x2000 #define PCI_DEVICE_ID_INTERG_2010 0x2010 @@ -1357,27 +1145,18 @@ #define PCI_DEVICE_ID_INTERG_5050 0x5050 #define PCI_VENDOR_ID_REALTEK 0x10ec -#define PCI_DEVICE_ID_REALTEK_8029 0x8029 -#define PCI_DEVICE_ID_REALTEK_8129 0x8129 #define PCI_DEVICE_ID_REALTEK_8139 0x8139 -#define PCI_DEVICE_ID_REALTEK_8169 0x8169 #define PCI_VENDOR_ID_XILINX 0x10ee #define PCI_DEVICE_ID_RME_DIGI96 0x3fc0 #define PCI_DEVICE_ID_RME_DIGI96_8 0x3fc1 #define PCI_DEVICE_ID_RME_DIGI96_8_PRO 0x3fc2 #define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3 -#define PCI_DEVICE_ID_XILINX_HAMMERFALL 0x3fc4 #define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5 #define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6 -#define PCI_DEVICE_ID_TURBOPAM 0x4020 -#define PCI_VENDOR_ID_TRUEVISION 0x10fa -#define PCI_DEVICE_ID_TRUEVISION_T1000 0x000c #define PCI_VENDOR_ID_INIT 0x1101 -#define PCI_DEVICE_ID_INIT_320P 0x9100 -#define PCI_DEVICE_ID_INIT_360P 0x9500 #define PCI_VENDOR_ID_CREATIVE 0x1102 // duplicate: ECTIVA #define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002 @@ -1405,36 +1184,25 @@ #define PCI_DEVICE_ID_VIA_8363_0 0x0305 #define PCI_DEVICE_ID_VIA_8371_0 0x0391 #define PCI_DEVICE_ID_VIA_8501_0 0x0501 -#define PCI_DEVICE_ID_VIA_82C505 0x0505 #define PCI_DEVICE_ID_VIA_82C561 0x0561 #define PCI_DEVICE_ID_VIA_82C586_1 0x0571 #define PCI_DEVICE_ID_VIA_82C576 0x0576 -#define PCI_DEVICE_ID_VIA_82C585 0x0585 #define PCI_DEVICE_ID_VIA_82C586_0 0x0586 -#define PCI_DEVICE_ID_VIA_82C595 0x0595 #define PCI_DEVICE_ID_VIA_82C596 0x0596 #define PCI_DEVICE_ID_VIA_82C597_0 0x0597 #define PCI_DEVICE_ID_VIA_82C598_0 0x0598 #define PCI_DEVICE_ID_VIA_8601_0 0x0601 #define PCI_DEVICE_ID_VIA_8605_0 0x0605 -#define PCI_DEVICE_ID_VIA_82C680 0x0680 #define PCI_DEVICE_ID_VIA_82C686 0x0686 #define PCI_DEVICE_ID_VIA_82C691_0 0x0691 -#define PCI_DEVICE_ID_VIA_82C693 0x0693 -#define PCI_DEVICE_ID_VIA_82C693_1 0x0698 -#define PCI_DEVICE_ID_VIA_82C926 0x0926 #define PCI_DEVICE_ID_VIA_82C576_1 0x1571 -#define PCI_DEVICE_ID_VIA_82C595_97 0x1595 #define PCI_DEVICE_ID_VIA_82C586_2 0x3038 #define PCI_DEVICE_ID_VIA_82C586_3 0x3040 -#define PCI_DEVICE_ID_VIA_6305 0x3044 #define PCI_DEVICE_ID_VIA_82C596_3 0x3050 #define PCI_DEVICE_ID_VIA_82C596B_3 0x3051 #define PCI_DEVICE_ID_VIA_82C686_4 0x3057 #define PCI_DEVICE_ID_VIA_82C686_5 0x3058 #define PCI_DEVICE_ID_VIA_8233_5 0x3059 -#define PCI_DEVICE_ID_VIA_8233_7 0x3065 -#define PCI_DEVICE_ID_VIA_82C686_6 0x3068 #define PCI_DEVICE_ID_VIA_8233_0 0x3074 #define PCI_DEVICE_ID_VIA_8633_0 0x3091 #define PCI_DEVICE_ID_VIA_8367_0 0x3099 @@ -1452,38 +1220,23 @@ #define PCI_DEVICE_ID_VIA_XN266 0x3156 #define PCI_DEVICE_ID_VIA_8754C_0 0x3168 #define PCI_DEVICE_ID_VIA_8235 0x3177 -#define PCI_DEVICE_ID_VIA_P4N333 0x3178 #define PCI_DEVICE_ID_VIA_8385_0 0x3188 #define PCI_DEVICE_ID_VIA_8377_0 0x3189 #define PCI_DEVICE_ID_VIA_8378_0 0x3205 #define PCI_DEVICE_ID_VIA_8783_0 0x3208 -#define PCI_DEVICE_ID_VIA_P4M400 0x3209 #define PCI_DEVICE_ID_VIA_8237 0x3227 #define PCI_DEVICE_ID_VIA_3296_0 0x0296 -#define PCI_DEVICE_ID_VIA_86C100A 0x6100 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 #define PCI_DEVICE_ID_VIA_8365_1 0x8305 #define PCI_DEVICE_ID_VIA_8371_1 0x8391 -#define PCI_DEVICE_ID_VIA_8501_1 0x8501 -#define PCI_DEVICE_ID_VIA_82C597_1 0x8597 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 -#define PCI_DEVICE_ID_VIA_8601_1 0x8601 -#define PCI_DEVICE_ID_VIA_8505_1 0x8605 -#define PCI_DEVICE_ID_VIA_8633_1 0xB091 -#define PCI_DEVICE_ID_VIA_8367_1 0xB099 -#define PCI_DEVICE_ID_VIA_P4X266_1 0xB101 -#define PCI_DEVICE_ID_VIA_8615_1 0xB103 -#define PCI_DEVICE_ID_VIA_8361_1 0xB112 -#define PCI_DEVICE_ID_VIA_8235_1 0xB168 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 #define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 #define PCI_VENDOR_ID_SIEMENS 0x110A #define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102 -#define PCI_VENDOR_ID_SMC2 0x1113 -#define PCI_DEVICE_ID_SMC2_1211TX 0x1211 #define PCI_VENDOR_ID_VORTEX 0x1119 #define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000 @@ -1506,18 +1259,6 @@ #define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103 #define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104 #define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105 -#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1 0x0110 -#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1 0x0111 -#define PCI_DEVICE_ID_VORTEX_GDT6537RP1 0x0112 -#define PCI_DEVICE_ID_VORTEX_GDT6557RP1 0x0113 -#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1 0x0114 -#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1 0x0115 -#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2 0x0120 -#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2 0x0121 -#define PCI_DEVICE_ID_VORTEX_GDT6537RP2 0x0122 -#define PCI_DEVICE_ID_VORTEX_GDT6557RP2 0x0123 -#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2 0x0124 -#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2 0x0125 #define PCI_VENDOR_ID_EF 0x111a #define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000 @@ -1529,21 +1270,15 @@ #define PCI_DEVICE_ID_IDT_IDT77201 0x0001 #define PCI_VENDOR_ID_FORE 0x1127 -#define PCI_DEVICE_ID_FORE_PCA200PC 0x0210 #define PCI_DEVICE_ID_FORE_PCA200E 0x0300 -#define PCI_VENDOR_ID_IMAGINGTECH 0x112f -#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI 0x0000 #define PCI_VENDOR_ID_PHILIPS 0x1131 -#define PCI_DEVICE_ID_PHILIPS_SAA7145 0x7145 #define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146 #define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730 #define PCI_VENDOR_ID_EICON 0x1133 -#define PCI_DEVICE_ID_EICON_DIVA20PRO 0xe001 #define PCI_DEVICE_ID_EICON_DIVA20 0xe002 -#define PCI_DEVICE_ID_EICON_DIVA20PRO_U 0xe003 #define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004 #define PCI_DEVICE_ID_EICON_DIVA201 0xe005 #define PCI_DEVICE_ID_EICON_DIVA202 0xe00b @@ -1555,35 +1290,17 @@ #define PCI_VENDOR_ID_ZIATECH 0x1138 #define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550 -#define PCI_VENDOR_ID_CYCLONE 0x113c -#define PCI_DEVICE_ID_CYCLONE_SDK 0x0001 -#define PCI_VENDOR_ID_ALLIANCE 0x1142 -#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO 0x3210 -#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO 0x6422 -#define PCI_DEVICE_ID_ALLIANCE_AT24 0x6424 -#define PCI_DEVICE_ID_ALLIANCE_AT3D 0x643d #define PCI_VENDOR_ID_SYSKONNECT 0x1148 -#define PCI_DEVICE_ID_SYSKONNECT_FP 0x4000 #define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200 #define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300 #define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320 #define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400 #define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500 -#define PCI_VENDOR_ID_VMIC 0x114a -#define PCI_DEVICE_ID_VMIC_VME 0x7587 #define PCI_VENDOR_ID_DIGI 0x114f -#define PCI_DEVICE_ID_DIGI_EPC 0x0002 -#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH 0x0003 -#define PCI_DEVICE_ID_DIGI_XEM 0x0004 -#define PCI_DEVICE_ID_DIGI_XR 0x0005 -#define PCI_DEVICE_ID_DIGI_CX 0x0006 -#define PCI_DEVICE_ID_DIGI_XRJ 0x0009 -#define PCI_DEVICE_ID_DIGI_EPCJ 0x000a -#define PCI_DEVICE_ID_DIGI_XR_920 0x0027 #define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070 #define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071 #define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072 @@ -1593,23 +1310,15 @@ #define PCI_DEVICE_ID_NEO_2RJ45 0x00CA #define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB -#define PCI_VENDOR_ID_MUTECH 0x1159 -#define PCI_DEVICE_ID_MUTECH_MV1000 0x0001 #define PCI_VENDOR_ID_XIRCOM 0x115d -#define PCI_DEVICE_ID_XIRCOM_X3201_ETH 0x0003 #define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101 #define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103 -#define PCI_VENDOR_ID_RENDITION 0x1163 -#define PCI_DEVICE_ID_RENDITION_VERITE 0x0001 -#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000 #define PCI_VENDOR_ID_SERVERWORKS 0x1166 #define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008 #define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009 -#define PCI_DEVICE_ID_SERVERWORKS_CIOB30 0x0010 -#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011 #define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017 #define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200 #define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201 @@ -1619,13 +1328,7 @@ #define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213 #define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214 #define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217 -#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220 -#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB 0x0220 -#define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221 #define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227 -#define PCI_DEVICE_ID_SERVERWORKS_GCLE 0x0225 -#define PCI_DEVICE_ID_SERVERWORKS_GCLE2 0x0227 -#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230 #define PCI_VENDOR_ID_SBE 0x1176 #define PCI_DEVICE_ID_SBE_WANXL100 0x0301 @@ -1636,17 +1339,12 @@ #define PCI_DEVICE_ID_TOSHIBA_PICCOLO 0x0102 #define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0103 #define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0105 -#define PCI_DEVICE_ID_TOSHIBA_601 0x0601 #define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a -#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_A 0x0603 -#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_B 0x060a #define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f #define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617 #define PCI_VENDOR_ID_TOSHIBA_2 0x102f -#define PCI_DEVICE_ID_TOSHIBA_TX3927 0x000a #define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030 -#define PCI_DEVICE_ID_TOSHIBA_TX4927 0x0180 #define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108 #define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3 @@ -1661,7 +1359,6 @@ #define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00 #define PCI_VENDOR_ID_ARTOP 0x1191 -#define PCI_DEVICE_ID_ARTOP_ATP8400 0x0004 #define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005 #define PCI_DEVICE_ID_ARTOP_ATP860 0x0006 #define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007 @@ -1674,16 +1371,11 @@ #define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040 #define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050 #define PCI_DEVICE_ID_ARTOP_8060 0x8060 -#define PCI_DEVICE_ID_ARTOP_AEC67160 0x8080 -#define PCI_DEVICE_ID_ARTOP_AEC67160_2 0x8081 -#define PCI_DEVICE_ID_ARTOP_AEC67162 0x808a #define PCI_VENDOR_ID_ZEITNET 0x1193 #define PCI_DEVICE_ID_ZEITNET_1221 0x0001 #define PCI_DEVICE_ID_ZEITNET_1225 0x0002 -#define PCI_VENDOR_ID_OMEGA 0x119b -#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221 #define PCI_VENDOR_ID_FUJITSU_ME 0x119e #define PCI_DEVICE_ID_FUJITSU_FS155 0x0001 @@ -1693,61 +1385,41 @@ #define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 #define PCI_VENDOR_ID_MARVELL 0x11ab -#define PCI_DEVICE_ID_MARVELL_GT64011 0x4146 -#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 #define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 #define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 #define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 #define PCI_DEVICE_ID_MARVELL_GT96100 0x9652 #define PCI_DEVICE_ID_MARVELL_GT96100A 0x9653 -#define PCI_VENDOR_ID_LITEON 0x11ad -#define PCI_DEVICE_ID_LITEON_LNE100TX 0x0002 #define PCI_VENDOR_ID_V3 0x11b0 #define PCI_DEVICE_ID_V3_V960 0x0001 -#define PCI_DEVICE_ID_V3_V350 0x0001 -#define PCI_DEVICE_ID_V3_V961 0x0002 #define PCI_DEVICE_ID_V3_V351 0x0002 -#define PCI_VENDOR_ID_NP 0x11bc -#define PCI_DEVICE_ID_NP_PCI_FDDI 0x0001 #define PCI_VENDOR_ID_ATT 0x11c1 -#define PCI_DEVICE_ID_ATT_L56XMF 0x0440 #define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480 -#define PCI_VENDOR_ID_NEC2 0x11c3 /* NEC (2nd) */ #define PCI_VENDOR_ID_SPECIALIX 0x11cb #define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000 -#define PCI_DEVICE_ID_SPECIALIX_XIO 0x4000 #define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000 #define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004 -#define PCI_VENDOR_ID_AURAVISION 0x11d1 -#define PCI_DEVICE_ID_AURAVISION_VXP524 0x01f7 #define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4 #define PCI_DEVICE_ID_AD1889JS 0x1889 -#define PCI_VENDOR_ID_IKON 0x11d5 -#define PCI_DEVICE_ID_IKON_10115 0x0115 -#define PCI_DEVICE_ID_IKON_10117 0x0117 -#define PCI_VENDOR_ID_SEGA 0x11db #define PCI_DEVICE_ID_SEGA_BBA 0x1234 #define PCI_VENDOR_ID_ZORAN 0x11de #define PCI_DEVICE_ID_ZORAN_36057 0x6057 #define PCI_DEVICE_ID_ZORAN_36120 0x6120 -#define PCI_VENDOR_ID_KINETIC 0x11f4 -#define PCI_DEVICE_ID_KINETIC_2915 0x2915 #define PCI_VENDOR_ID_COMPEX 0x11f6 #define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112 -#define PCI_DEVICE_ID_COMPEX_RL2000 0x1401 #define PCI_VENDOR_ID_RP 0x11fe #define PCI_DEVICE_ID_RP32INTF 0x0001 @@ -1761,7 +1433,6 @@ #define PCI_DEVICE_ID_RP16SNI 0x0009 #define PCI_DEVICE_ID_RPP4 0x000A #define PCI_DEVICE_ID_RPP8 0x000B -#define PCI_DEVICE_ID_RP8M 0x000C #define PCI_DEVICE_ID_RP4M 0x000D #define PCI_DEVICE_ID_RP2_232 0x000E #define PCI_DEVICE_ID_RP2_422 0x000F @@ -1805,10 +1476,7 @@ #define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005 #define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009 -#define PCI_VENDOR_ID_SIGMADES 0x1236 -#define PCI_DEVICE_ID_SIGMADES_6425 0x6401 -#define PCI_VENDOR_ID_CCUBE 0x123f #define PCI_VENDOR_ID_AVM 0x1244 #define PCI_DEVICE_ID_AVM_B1 0x0700 @@ -1818,19 +1486,8 @@ #define PCI_DEVICE_ID_AVM_C2 0x1100 #define PCI_DEVICE_ID_AVM_T1 0x1200 -#define PCI_VENDOR_ID_DIPIX 0x1246 #define PCI_VENDOR_ID_STALLION 0x124d -#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000 -#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002 -#define PCI_DEVICE_ID_STALLION_EIOPCI 0x0003 - -#define PCI_VENDOR_ID_OPTIBASE 0x1255 -#define PCI_DEVICE_ID_OPTIBASE_FORGE 0x1110 -#define PCI_DEVICE_ID_OPTIBASE_FUSION 0x1210 -#define PCI_DEVICE_ID_OPTIBASE_VPLEX 0x2110 -#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC 0x2120 -#define PCI_DEVICE_ID_OPTIBASE_VQUEST 0x2130 /* Allied Telesyn */ #define PCI_VENDOR_ID_AT 0x1259 @@ -1839,7 +1496,6 @@ #define PCI_VENDOR_ID_ESS 0x125d #define PCI_DEVICE_ID_ESS_ESS1968 0x1968 -#define PCI_DEVICE_ID_ESS_AUDIOPCI 0x1969 #define PCI_DEVICE_ID_ESS_ESS1978 0x1978 #define PCI_DEVICE_ID_ESS_ALLEGRO_1 0x1988 #define PCI_DEVICE_ID_ESS_ALLEGRO 0x1989 @@ -1852,11 +1508,7 @@ #define PCI_VENDOR_ID_SATSAGEM 0x1267 #define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016 -#define PCI_DEVICE_ID_SATSAGEM_PCR2101 0x5352 -#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b -#define PCI_VENDOR_ID_HUGHES 0x1273 -#define PCI_DEVICE_ID_HUGHES_DIRECPC 0x0002 #define PCI_VENDOR_ID_ENSONIQ 0x1274 #define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880 @@ -1877,13 +1529,10 @@ #define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886 /* formerly Platform Tech */ -#define PCI_VENDOR_ID_ESS_OLD 0x1285 #define PCI_DEVICE_ID_ESS_ESS0100 0x0100 #define PCI_VENDOR_ID_ALTEON 0x12ae -#define PCI_DEVICE_ID_ALTEON_ACENIC 0x0001 -#define PCI_VENDOR_ID_USR 0x12B9 #define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4 #define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001 @@ -1898,8 +1547,6 @@ #define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A #define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B -#define PCI_VENDOR_ID_PICTUREL 0x12c5 -#define PCI_DEVICE_ID_PICTUREL_PCIVST 0x0081 #define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2 #define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018 @@ -1921,8 +1568,6 @@ #define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8 #define PCI_DEVICE_ID_LML_33R10 0x8a02 -#define PCI_VENDOR_ID_CBOARDS 0x1307 -#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001 #define PCI_VENDOR_ID_SIIG 0x131f #define PCI_SUBVENDOR_ID_SIIG 0x131f @@ -1965,8 +1610,6 @@ #define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 -#define PCI_VENDOR_ID_RADISYS 0x1331 -#define PCI_DEVICE_ID_RADISYS_ENP2611 0x0030 #define PCI_VENDOR_ID_DOMEX 0x134a #define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001 @@ -1974,8 +1617,6 @@ #define PCI_VENDOR_ID_QUATECH 0x135C #define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 #define PCI_DEVICE_ID_QUATECH_DSC100 0x0020 -#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030 -#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040 #define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050 #define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060 @@ -1994,7 +1635,6 @@ #define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106 #define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107 #define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108 -#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS 0x0109 #define PCI_VENDOR_ID_KAWASAKI 0x136b #define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01 @@ -2008,12 +1648,9 @@ #define PCI_DEVICE_ID_LMC_SSI 0x0005 #define PCI_DEVICE_ID_LMC_T1 0x0006 -#define PCI_VENDOR_ID_MARIAN 0x1382 -#define PCI_DEVICE_ID_MARIAN_PRODIF_PLUS 0x2048 #define PCI_VENDOR_ID_NETGEAR 0x1385 #define PCI_DEVICE_ID_NETGEAR_GA620 0x620a -#define PCI_DEVICE_ID_NETGEAR_GA622 0x622a #define PCI_VENDOR_ID_APPLICOM 0x1389 #define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001 @@ -2036,9 +1673,6 @@ #define PCI_DEVICE_ID_MOXA_CP134U 0x1340 #define PCI_DEVICE_ID_MOXA_C168 0x1680 #define PCI_DEVICE_ID_MOXA_CP168U 0x1681 -#define PCI_DEVICE_ID_MOXA_CP204J 0x2040 -#define PCI_DEVICE_ID_MOXA_C218 0x2180 -#define PCI_DEVICE_ID_MOXA_C320 0x3200 #define PCI_VENDOR_ID_CCD 0x1397 #define PCI_DEVICE_ID_CCD_2BD0 0x2bd0 @@ -2059,9 +1693,7 @@ #define PCI_VENDOR_ID_MICROGATE 0x13c0 #define PCI_DEVICE_ID_MICROGATE_USC 0x0010 -#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020 #define PCI_DEVICE_ID_MICROGATE_SCA 0x0030 -#define PCI_DEVICE_ID_MICROGATE_USC2 0x0210 #define PCI_VENDOR_ID_3WARE 0x13C1 #define PCI_DEVICE_ID_3WARE_1000 0x1000 @@ -2112,10 +1744,6 @@ #define PCI_VENDOR_ID_SAMSUNG 0x144d -#define PCI_VENDOR_ID_AIRONET 0x14b9 -#define PCI_DEVICE_ID_AIRONET_4800_1 0x0001 -#define PCI_DEVICE_ID_AIRONET_4800 0x4500 // values switched? see -#define PCI_DEVICE_ID_AIRONET_4500 0x4800 // drivers/net/aironet4500_card.c #define PCI_VENDOR_ID_TITAN 0x14D2 #define PCI_DEVICE_ID_TITAN_010L 0x8001 @@ -2134,8 +1762,6 @@ #define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400 #define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402 -#define PCI_VENDOR_ID_SIPACKETS 0x14d9 -#define PCI_DEVICE_ID_SP_HT 0x0010 #define PCI_VENDOR_ID_AFAVLAB 0x14db #define PCI_DEVICE_ID_AFAVLAB_P028 0x2180 @@ -2200,8 +1826,6 @@ #define PCI_VENDOR_ID_CHELSIO 0x1425 -#define PCI_VENDOR_ID_MIPS 0x153f -#define PCI_DEVICE_ID_SOC_IT 0x0001 #define PCI_VENDOR_ID_SYBA 0x1592 #define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 @@ -2221,15 +1845,7 @@ #define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274 #define PCI_VENDOR_ID_PDC 0x15e9 -#define PCI_DEVICE_ID_PDC_1841 0x1841 -#define PCI_VENDOR_ID_MACROLINK 0x15ed -#define PCI_DEVICE_ID_MACROLINK_MCCS8 0x1000 -#define PCI_DEVICE_ID_MACROLINK_MCCS 0x1001 -#define PCI_DEVICE_ID_MACROLINK_MCCS8H 0x1002 -#define PCI_DEVICE_ID_MACROLINK_MCCSH 0x1003 -#define PCI_DEVICE_ID_MACROLINK_MCCR8 0x2000 -#define PCI_DEVICE_ID_MACROLINK_MCCR 0x2001 #define PCI_VENDOR_ID_FARSITE 0x1619 #define PCI_DEVICE_ID_FARSITE_T2P 0x0400 @@ -2247,7 +1863,6 @@ #define PCI_DEVICE_ID_REVOLUTION 0x0044 #define PCI_VENDOR_ID_LINKSYS 0x1737 -#define PCI_DEVICE_ID_LINKSYS_EG1032 0x1032 #define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064 #define PCI_VENDOR_ID_ALTIMA 0x173b @@ -2262,7 +1877,6 @@ #define PCI_DEVICE_ID_HERC_WIN 0x5732 #define PCI_DEVICE_ID_HERC_UNI 0x5832 -#define PCI_VENDOR_ID_INFINICON 0x1820 #define PCI_VENDOR_ID_SITECOM 0x182d #define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069 @@ -2272,8 +1886,6 @@ #define PCI_VENDOR_ID_TDI 0x192E #define PCI_DEVICE_ID_TDI_EHCI 0x0101 -#define PCI_VENDOR_ID_SYMPHONY 0x1c1c -#define PCI_DEVICE_ID_SYMPHONY_101 0x0001 #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 @@ -2282,59 +1894,26 @@ #define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013 #define PCI_VENDOR_ID_3DLABS 0x3d3d -#define PCI_DEVICE_ID_3DLABS_300SX 0x0001 -#define PCI_DEVICE_ID_3DLABS_500TX 0x0002 -#define PCI_DEVICE_ID_3DLABS_DELTA 0x0003 -#define PCI_DEVICE_ID_3DLABS_PERMEDIA 0x0004 -#define PCI_DEVICE_ID_3DLABS_MX 0x0006 #define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007 -#define PCI_DEVICE_ID_3DLABS_GAMMA 0x0008 #define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009 -#define PCI_VENDOR_ID_AVANCE 0x4005 -#define PCI_DEVICE_ID_AVANCE_ALG2064 0x2064 -#define PCI_DEVICE_ID_AVANCE_2302 0x2302 #define PCI_VENDOR_ID_AKS 0x416c #define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100 -#define PCI_DEVICE_ID_AKS_CPC 0x0200 -#define PCI_VENDOR_ID_REDCREEK 0x4916 -#define PCI_DEVICE_ID_RC45 0x1960 -#define PCI_VENDOR_ID_NETVIN 0x4a14 -#define PCI_DEVICE_ID_NETVIN_NV5000SC 0x5000 #define PCI_VENDOR_ID_S3 0x5333 -#define PCI_DEVICE_ID_S3_PLATO_PXS 0x0551 -#define PCI_DEVICE_ID_S3_ViRGE 0x5631 #define PCI_DEVICE_ID_S3_TRIO 0x8811 -#define PCI_DEVICE_ID_S3_AURORA64VP 0x8812 -#define PCI_DEVICE_ID_S3_TRIO64UVP 0x8814 -#define PCI_DEVICE_ID_S3_ViRGE_VX 0x883d #define PCI_DEVICE_ID_S3_868 0x8880 -#define PCI_DEVICE_ID_S3_928 0x88b0 -#define PCI_DEVICE_ID_S3_864_1 0x88c0 -#define PCI_DEVICE_ID_S3_864_2 0x88c1 -#define PCI_DEVICE_ID_S3_964_1 0x88d0 -#define PCI_DEVICE_ID_S3_964_2 0x88d1 #define PCI_DEVICE_ID_S3_968 0x88f0 -#define PCI_DEVICE_ID_S3_TRIO64V2 0x8901 -#define PCI_DEVICE_ID_S3_PLATO_PXG 0x8902 -#define PCI_DEVICE_ID_S3_ViRGE_DXGX 0x8a01 -#define PCI_DEVICE_ID_S3_ViRGE_GX2 0x8a10 #define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25 -#define PCI_DEVICE_ID_S3_ViRGE_MX 0x8c01 -#define PCI_DEVICE_ID_S3_ViRGE_MXP 0x8c02 -#define PCI_DEVICE_ID_S3_ViRGE_MXPMV 0x8c03 #define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04 #define PCI_DEVICE_ID_S3_SONICVIBES 0xca00 #define PCI_VENDOR_ID_DUNORD 0x5544 #define PCI_DEVICE_ID_DUNORD_I3000 0x0001 -#define PCI_VENDOR_ID_GENROCO 0x5555 -#define PCI_DEVICE_ID_GENROCO_HFP832 0x0003 #define PCI_VENDOR_ID_DCI 0x6666 #define PCI_DEVICE_ID_DCI_PCCOM4 0x0001 @@ -2342,7 +1921,6 @@ #define PCI_VENDOR_ID_INTEL 0x8086 #define PCI_DEVICE_ID_INTEL_EESSC 0x0008 -#define PCI_DEVICE_ID_INTEL_21145 0x0039 #define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 #define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 #define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 @@ -2351,30 +1929,17 @@ #define PCI_DEVICE_ID_INTEL_82375 0x0482 #define PCI_DEVICE_ID_INTEL_82424 0x0483 #define PCI_DEVICE_ID_INTEL_82378 0x0484 -#define PCI_DEVICE_ID_INTEL_82430 0x0486 -#define PCI_DEVICE_ID_INTEL_82434 0x04a3 #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 -#define PCI_DEVICE_ID_INTEL_82562ET 0x1031 -#define PCI_DEVICE_ID_INTEL_82801CAM 0x1038 #define PCI_DEVICE_ID_INTEL_82815_MC 0x1130 -#define PCI_DEVICE_ID_INTEL_82815_AB 0x1131 #define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132 -#define PCI_DEVICE_ID_INTEL_82559ER 0x1209 #define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 -#define PCI_DEVICE_ID_INTEL_82092AA_1 0x1222 -#define PCI_DEVICE_ID_INTEL_7116 0x1223 #define PCI_DEVICE_ID_INTEL_7505_0 0x2550 -#define PCI_DEVICE_ID_INTEL_7505_1 0x2552 #define PCI_DEVICE_ID_INTEL_7205_0 0x255d -#define PCI_DEVICE_ID_INTEL_82596 0x1226 -#define PCI_DEVICE_ID_INTEL_82865 0x1227 -#define PCI_DEVICE_ID_INTEL_82557 0x1229 #define PCI_DEVICE_ID_INTEL_82437 0x122d #define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e #define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230 #define PCI_DEVICE_ID_INTEL_82371MX 0x1234 -#define PCI_DEVICE_ID_INTEL_82437MX 0x1235 #define PCI_DEVICE_ID_INTEL_82441 0x1237 #define PCI_DEVICE_ID_INTEL_82380FB 0x124b #define PCI_DEVICE_ID_INTEL_82439 0x1250 @@ -2383,83 +1948,53 @@ #define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 #define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 -#define PCI_DEVICE_ID_INTEL_82801AA_2 0x2412 #define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 #define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415 #define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416 #define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418 #define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420 #define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421 -#define PCI_DEVICE_ID_INTEL_82801AB_2 0x2422 #define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423 #define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425 #define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426 #define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428 #define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440 -#define PCI_DEVICE_ID_INTEL_82801BA_1 0x2442 #define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443 -#define PCI_DEVICE_ID_INTEL_82801BA_3 0x2444 #define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445 -#define PCI_DEVICE_ID_INTEL_82801BA_5 0x2446 #define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448 -#define PCI_DEVICE_ID_INTEL_82801BA_7 0x2449 #define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a #define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b #define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c #define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e #define PCI_DEVICE_ID_INTEL_82801E_0 0x2450 -#define PCI_DEVICE_ID_INTEL_82801E_2 0x2452 -#define PCI_DEVICE_ID_INTEL_82801E_3 0x2453 -#define PCI_DEVICE_ID_INTEL_82801E_9 0x2459 #define PCI_DEVICE_ID_INTEL_82801E_11 0x245b -#define PCI_DEVICE_ID_INTEL_82801E_13 0x245d -#define PCI_DEVICE_ID_INTEL_82801E_14 0x245e #define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480 -#define PCI_DEVICE_ID_INTEL_82801CA_2 0x2482 #define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483 -#define PCI_DEVICE_ID_INTEL_82801CA_4 0x2484 #define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485 #define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486 -#define PCI_DEVICE_ID_INTEL_82801CA_7 0x2487 #define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a #define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b #define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c #define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0 #define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1 -#define PCI_DEVICE_ID_INTEL_82801DB_2 0x24c2 #define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3 -#define PCI_DEVICE_ID_INTEL_82801DB_4 0x24c4 #define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5 #define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6 -#define PCI_DEVICE_ID_INTEL_82801DB_7 0x24c7 #define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9 #define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca #define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb #define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc -#define PCI_DEVICE_ID_INTEL_82801DB_13 0x24cd #define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0 #define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1 -#define PCI_DEVICE_ID_INTEL_82801EB_2 0x24d2 #define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3 -#define PCI_DEVICE_ID_INTEL_82801EB_4 0x24d4 #define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5 #define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6 -#define PCI_DEVICE_ID_INTEL_82801EB_7 0x24d7 #define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db -#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd #define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1 #define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2 -#define PCI_DEVICE_ID_INTEL_ESB_3 0x25a3 -#define PCI_DEVICE_ID_INTEL_ESB_31 0x25b0 #define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4 #define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6 -#define PCI_DEVICE_ID_INTEL_ESB_6 0x25a7 -#define PCI_DEVICE_ID_INTEL_ESB_7 0x25a9 -#define PCI_DEVICE_ID_INTEL_ESB_8 0x25aa #define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab -#define PCI_DEVICE_ID_INTEL_ESB_11 0x25ac -#define PCI_DEVICE_ID_INTEL_ESB_12 0x25ad -#define PCI_DEVICE_ID_INTEL_ESB_13 0x25ae #define PCI_DEVICE_ID_INTEL_82820_HB 0x2500 #define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501 #define PCI_DEVICE_ID_INTEL_82850_HB 0x2530 @@ -2469,7 +2004,6 @@ #define PCI_DEVICE_ID_INTEL_82865_HB 0x2570 #define PCI_DEVICE_ID_INTEL_82865_IG 0x2572 #define PCI_DEVICE_ID_INTEL_82875_HB 0x2578 -#define PCI_DEVICE_ID_INTEL_82875_IG 0x257b #define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580 #define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582 #define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590 @@ -2479,80 +2013,23 @@ #define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640 #define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641 #define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642 -#define PCI_DEVICE_ID_INTEL_ICH6_3 0x2651 -#define PCI_DEVICE_ID_INTEL_ICH6_4 0x2652 -#define PCI_DEVICE_ID_INTEL_ICH6_5 0x2653 -#define PCI_DEVICE_ID_INTEL_ICH6_6 0x2658 -#define PCI_DEVICE_ID_INTEL_ICH6_7 0x2659 -#define PCI_DEVICE_ID_INTEL_ICH6_8 0x265a -#define PCI_DEVICE_ID_INTEL_ICH6_9 0x265b -#define PCI_DEVICE_ID_INTEL_ICH6_10 0x265c -#define PCI_DEVICE_ID_INTEL_ICH6_11 0x2660 -#define PCI_DEVICE_ID_INTEL_ICH6_12 0x2662 -#define PCI_DEVICE_ID_INTEL_ICH6_13 0x2664 -#define PCI_DEVICE_ID_INTEL_ICH6_14 0x2666 -#define PCI_DEVICE_ID_INTEL_ICH6_15 0x2668 #define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a #define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d #define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e #define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f #define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670 -#define PCI_DEVICE_ID_INTEL_ESB2_1 0x2680 -#define PCI_DEVICE_ID_INTEL_ESB2_2 0x2681 -#define PCI_DEVICE_ID_INTEL_ESB2_3 0x2682 -#define PCI_DEVICE_ID_INTEL_ESB2_4 0x2683 -#define PCI_DEVICE_ID_INTEL_ESB2_5 0x2688 -#define PCI_DEVICE_ID_INTEL_ESB2_6 0x2689 -#define PCI_DEVICE_ID_INTEL_ESB2_7 0x268a -#define PCI_DEVICE_ID_INTEL_ESB2_8 0x268b -#define PCI_DEVICE_ID_INTEL_ESB2_9 0x268c -#define PCI_DEVICE_ID_INTEL_ESB2_10 0x2690 -#define PCI_DEVICE_ID_INTEL_ESB2_11 0x2692 -#define PCI_DEVICE_ID_INTEL_ESB2_12 0x2694 -#define PCI_DEVICE_ID_INTEL_ESB2_13 0x2696 #define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698 -#define PCI_DEVICE_ID_INTEL_ESB2_15 0x2699 -#define PCI_DEVICE_ID_INTEL_ESB2_16 0x269a #define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b #define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e #define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8 #define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9 -#define PCI_DEVICE_ID_INTEL_ICH7_2 0x27c0 -#define PCI_DEVICE_ID_INTEL_ICH7_3 0x27c1 #define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0 #define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd -#define PCI_DEVICE_ID_INTEL_ICH7_5 0x27c4 -#define PCI_DEVICE_ID_INTEL_ICH7_6 0x27c5 -#define PCI_DEVICE_ID_INTEL_ICH7_7 0x27c8 -#define PCI_DEVICE_ID_INTEL_ICH7_8 0x27c9 -#define PCI_DEVICE_ID_INTEL_ICH7_9 0x27ca -#define PCI_DEVICE_ID_INTEL_ICH7_10 0x27cb -#define PCI_DEVICE_ID_INTEL_ICH7_11 0x27cc -#define PCI_DEVICE_ID_INTEL_ICH7_12 0x27d0 -#define PCI_DEVICE_ID_INTEL_ICH7_13 0x27d2 -#define PCI_DEVICE_ID_INTEL_ICH7_14 0x27d4 -#define PCI_DEVICE_ID_INTEL_ICH7_15 0x27d6 -#define PCI_DEVICE_ID_INTEL_ICH7_16 0x27d8 #define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da -#define PCI_DEVICE_ID_INTEL_ICH7_18 0x27dc #define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd #define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de #define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df -#define PCI_DEVICE_ID_INTEL_ICH7_22 0x27e0 -#define PCI_DEVICE_ID_INTEL_ICH7_23 0x27e2 #define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340 -#define PCI_DEVICE_ID_INTEL_ESB2_19 0x3500 -#define PCI_DEVICE_ID_INTEL_ESB2_20 0x3501 -#define PCI_DEVICE_ID_INTEL_ESB2_21 0x3504 -#define PCI_DEVICE_ID_INTEL_ESB2_22 0x3505 -#define PCI_DEVICE_ID_INTEL_ESB2_23 0x350c -#define PCI_DEVICE_ID_INTEL_ESB2_24 0x350d -#define PCI_DEVICE_ID_INTEL_ESB2_25 0x3510 -#define PCI_DEVICE_ID_INTEL_ESB2_26 0x3511 -#define PCI_DEVICE_ID_INTEL_ESB2_27 0x3514 -#define PCI_DEVICE_ID_INTEL_ESB2_28 0x3515 -#define PCI_DEVICE_ID_INTEL_ESB2_29 0x3518 -#define PCI_DEVICE_ID_INTEL_ESB2_30 0x3519 #define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 #define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 #define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 @@ -2566,7 +2043,6 @@ #define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599 #define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a #define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e -#define PCI_DEVICE_ID_INTEL_80310 0x530d #define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000 #define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010 #define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020 @@ -2591,22 +2067,15 @@ #define PCI_DEVICE_ID_INTEL_440MX_6 0x7196 #define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198 #define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199 -#define PCI_DEVICE_ID_INTEL_82443MX_2 0x719a #define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b #define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0 -#define PCI_DEVICE_ID_INTEL_82443GX_1 0x71a1 #define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2 -#define PCI_DEVICE_ID_INTEL_82372FB_0 0x7600 #define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601 -#define PCI_DEVICE_ID_INTEL_82372FB_2 0x7602 -#define PCI_DEVICE_ID_INTEL_82372FB_3 0x7603 #define PCI_DEVICE_ID_INTEL_82454GX 0x84c4 -#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5 #define PCI_DEVICE_ID_INTEL_82451NX 0x84ca #define PCI_DEVICE_ID_INTEL_82454NX 0x84cb #define PCI_DEVICE_ID_INTEL_84460GX 0x84ea #define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500 -#define PCI_DEVICE_ID_INTEL_IXP2400 0x9001 #define PCI_DEVICE_ID_INTEL_IXP2800 0x9004 #define PCI_DEVICE_ID_INTEL_S21152BB 0xb152 @@ -2619,7 +2088,6 @@ #define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003 #define PCI_VENDOR_ID_KTI 0x8e2e -#define PCI_DEVICE_ID_KTI_ET32P2 0x3000 #define PCI_VENDOR_ID_ADAPTEC 0x9004 #define PCI_DEVICE_ID_ADAPTEC_7810 0x1078 @@ -2627,7 +2095,6 @@ #define PCI_DEVICE_ID_ADAPTEC_38602 0x3860 #define PCI_DEVICE_ID_ADAPTEC_7850 0x5078 #define PCI_DEVICE_ID_ADAPTEC_7855 0x5578 -#define PCI_DEVICE_ID_ADAPTEC_5800 0x5800 #define PCI_DEVICE_ID_ADAPTEC_3860 0x6038 #define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075 #define PCI_DEVICE_ID_ADAPTEC_7860 0x6078 @@ -2647,7 +2114,6 @@ #define PCI_DEVICE_ID_ADAPTEC_7886 0x8678 #define PCI_DEVICE_ID_ADAPTEC_7887 0x8778 #define PCI_DEVICE_ID_ADAPTEC_7888 0x8878 -#define PCI_DEVICE_ID_ADAPTEC_1030 0x8b78 #define PCI_VENDOR_ID_ADAPTEC2 0x9005 #define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010 @@ -2667,8 +2133,6 @@ #define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf #define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503 -#define PCI_VENDOR_ID_ATRONICS 0x907f -#define PCI_DEVICE_ID_ATRONICS_2015 0x2015 #define PCI_VENDOR_ID_HOLTEK 0x9412 #define PCI_DEVICE_ID_HOLTEK_6565 0x6565 @@ -2701,7 +2165,3 @@ #define PCI_DEVICE_ID_RME_DIGI32_PRO 0x9897 #define PCI_DEVICE_ID_RME_DIGI32_8 0x9898 -#define PCI_VENDOR_ID_ARK 0xedd8 -#define PCI_DEVICE_ID_ARK_STING 0xa091 -#define PCI_DEVICE_ID_ARK_STINGARK 0xa099 -#define PCI_DEVICE_ID_ARK_2000MT 0xa0a1 -- GitLab From 934199e95d6ac28f42686fe3009877eff33e06c3 Mon Sep 17 00:00:00 2001 From: linas Date: Wed, 28 Sep 2005 19:33:38 -0500 Subject: [PATCH 0726/1519] [PATCH] ppc64 PCI Hotplug: cleanup unsymmetric API routines This is a minor patch to the ppc64 PCI hotplug code; it makes the call to rpaphp_unconfig_pci_adapter() symmetric with respect to the call to rpaphp_config_pci_adapter(). I discussed this with John Rose, who had provided the last round of changes for these functions; he appearently had this patch but somehow failed to mail it out. Tested. (added/removed device). Signed-off-by: Linas Vepstas drivers/pci/hotplug/rpaphp.h | 3 ++- drivers/pci/hotplug/rpaphp_core.c | 5 ++++- drivers/pci/hotplug/rpaphp_pci.c | 11 +++-------- 3 files changed, 9 insertions(+), 10 deletions(-) --- drivers/pci/hotplug/rpaphp.h | 3 ++- drivers/pci/hotplug/rpaphp_core.c | 5 ++++- drivers/pci/hotplug/rpaphp_pci.c | 11 +++-------- 3 files changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h index 61d94d1e29cb..71ea5f9bb284 100644 --- a/drivers/pci/hotplug/rpaphp.h +++ b/drivers/pci/hotplug/rpaphp.h @@ -92,9 +92,10 @@ extern struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn); extern int rpaphp_claim_resource(struct pci_dev *dev, int resource); extern int rpaphp_enable_pci_slot(struct slot *slot); extern int register_pci_slot(struct slot *slot); -extern int rpaphp_unconfig_pci_adapter(struct slot *slot); extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value); + extern int rpaphp_config_pci_adapter(struct pci_bus *bus); +extern int rpaphp_unconfig_pci_adapter(struct pci_bus *bus); /* rpaphp_core.c */ extern int rpaphp_add_slot(struct device_node *dn); diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index c830ff0acdc3..cf075c34b578 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -426,8 +426,11 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) dbg("DISABLING SLOT %s\n", slot->name); down(&rpaphp_sem); - retval = rpaphp_unconfig_pci_adapter(slot); + retval = rpaphp_unconfig_pci_adapter(slot->bus); up(&rpaphp_sem); + slot->state = NOT_CONFIGURED; + info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__, + slot->name); exit: dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval); return retval; diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c index 49e4d10a6488..46c157d26a2f 100644 --- a/drivers/pci/hotplug/rpaphp_pci.c +++ b/drivers/pci/hotplug/rpaphp_pci.c @@ -319,20 +319,15 @@ static void rpaphp_eeh_remove_bus_device(struct pci_dev *dev) return; } -int rpaphp_unconfig_pci_adapter(struct slot *slot) +int rpaphp_unconfig_pci_adapter(struct pci_bus *bus) { struct pci_dev *dev, *tmp; - int retval = 0; - list_for_each_entry_safe(dev, tmp, slot->pci_devs, bus_list) { + list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { rpaphp_eeh_remove_bus_device(dev); pci_remove_bus_device(dev); } - - slot->state = NOT_CONFIGURED; - info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__, - slot->name); - return retval; + return 0; } static int setup_pci_hotplug_slot_info(struct slot *slot) -- GitLab From e3b1bd572f1cdb247bb4266a593b6894dc578d6a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 21 Sep 2005 22:26:31 +0200 Subject: [PATCH 0727/1519] [PATCH] PCI: Add quirk for SMBus on HP D530 One more SMBus unhiding quirk, this time for the HP D530. Requested and successfully tested by Ben Cranston. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e1bd169cf55c..ee1605906a3e 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -950,6 +950,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) switch (dev->subsystem_device) { case 0x12bc: /* HP D330L */ + case 0x12bd: /* HP D530 */ asus_hides_smbus = 1; } } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) { -- GitLab From dbd7a78818d125a0ebd5507d4edb4dd5900006ab Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:36 -0700 Subject: [PATCH 0728/1519] [PATCH] shpchp: use the PCI core for hotplug resource management This patch converts the standard hotplug controller driver to use the PCI core for resource management. This eliminates a whole lot of duplicated code, and integrates shpchp in the system's normal PCI handling code. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 57 +- drivers/pci/hotplug/shpchp_core.c | 36 +- drivers/pci/hotplug/shpchp_ctrl.c | 1624 +----------------------- drivers/pci/hotplug/shpchp_pci.c | 482 +------ drivers/pci/hotplug/shpchp_sysfs.c | 121 +- drivers/pci/hotplug/shpchprm.h | 12 - drivers/pci/hotplug/shpchprm_acpi.c | 851 ------------- drivers/pci/hotplug/shpchprm_legacy.c | 294 ----- drivers/pci/hotplug/shpchprm_legacy.h | 113 -- drivers/pci/hotplug/shpchprm_nonacpi.c | 278 ---- drivers/pci/hotplug/shpchprm_nonacpi.h | 56 - 11 files changed, 168 insertions(+), 3756 deletions(-) delete mode 100644 drivers/pci/hotplug/shpchprm_legacy.h delete mode 100644 drivers/pci/hotplug/shpchprm_nonacpi.h diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index b7d1c61d6bbb..deea56c73cf2 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -63,14 +63,7 @@ struct pci_func { u8 switch_save; u8 presence_save; u8 pwr_save; - u32 base_length[0x06]; - u8 base_type[0x06]; - u16 reserved2; u32 config_space[0x20]; - struct pci_resource *mem_head; - struct pci_resource *p_mem_head; - struct pci_resource *io_head; - struct pci_resource *bus_head; struct pci_dev* pci_dev; }; @@ -96,12 +89,6 @@ struct slot { struct list_head slot_list; }; -struct pci_resource { - struct pci_resource * next; - u32 base; - u32 length; -}; - struct event_info { u32 event_type; u8 hp_slot; @@ -113,10 +100,6 @@ struct controller { void * hpc_ctlr_handle; /* HPC controller handle */ int num_slots; /* Number of slots on ctlr */ int slot_num_inc; /* 1 or -1 */ - struct pci_resource *mem_head; - struct pci_resource *p_mem_head; - struct pci_resource *io_head; - struct pci_resource *bus_head; struct pci_dev *pci_dev; struct pci_bus *pci_bus; struct event_info event_queue[10]; @@ -139,20 +122,6 @@ struct controller { u16 vendor_id; }; -struct irq_mapping { - u8 barber_pole; - u8 valid_INT; - u8 interrupt[4]; -}; - -struct resource_lists { - struct pci_resource *mem_head; - struct pci_resource *p_mem_head; - struct pci_resource *io_head; - struct pci_resource *bus_head; - struct irq_mapping *irqs; -}; - /* Define AMD SHPC ID */ #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 @@ -197,7 +166,6 @@ struct resource_lists { #define msg_HPC_rev_error "Unsupported revision of the PCI hot plug controller found.\n" #define msg_HPC_non_shpc "The PCI hot plug controller is not supported by this driver.\n" #define msg_HPC_not_supported "This system is not supported by this version of shpcphd mdoule. Upgrade to a newer version of shpchpd\n" -#define msg_unable_to_save "Unable to store PCI hot plug add resource information. This system must be rebooted before adding any PCI devices.\n" #define msg_button_on "PCI slot #%d - powering on due to button press.\n" #define msg_button_off "PCI slot #%d - powering off due to button press.\n" #define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n" @@ -207,7 +175,6 @@ struct resource_lists { extern void shpchp_create_ctrl_files (struct controller *ctrl); /* controller functions */ -extern int shpchprm_find_available_resources(struct controller *ctrl); extern int shpchp_event_start_thread(void); extern void shpchp_event_stop_thread(void); extern struct pci_func *shpchp_slot_create(unsigned char busnumber); @@ -220,19 +187,10 @@ extern u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id); extern u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id); extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id); -/* resource functions */ -extern int shpchp_resource_sort_and_combine(struct pci_resource **head); - /* pci functions */ -extern int shpchp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num); -/*extern int shpchp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num, struct slot *slot);*/ extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num); -extern int shpchp_save_used_resources(struct controller *ctrl, struct pci_func * func, int flag); extern int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot); -extern void shpchp_destroy_board_resources(struct pci_func * func); -extern int shpchp_return_board_resources(struct pci_func * func, struct resource_lists * resources); -extern void shpchp_destroy_resource_list(struct resource_lists * resources); -extern int shpchp_configure_device(struct controller* ctrl, struct pci_func* func); +extern int shpchp_configure_device(struct slot *p_slot); extern int shpchp_unconfigure_device(struct pci_func* func); @@ -240,10 +198,6 @@ extern int shpchp_unconfigure_device(struct pci_func* func); extern struct controller *shpchp_ctrl_list; extern struct pci_func *shpchp_slot_list[256]; -/* These are added to support AMD shpc */ -extern u8 shpchp_nic_irq; -extern u8 shpchp_disk_irq; - struct ctrl_reg { volatile u32 base_offset; volatile u32 slot_avail1; @@ -398,15 +352,6 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl) return retval; } -/* Puts node back in the resource list pointed to by head */ -static inline void return_resource(struct pci_resource **head, struct pci_resource *node) -{ - if (!node || !head) - return; - node->next = *head; - *head = node; -} - #define SLOT_NAME_SIZE 10 static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot) diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 6f7d8a29957a..8f5da504df34 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -418,16 +418,8 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_ctrl_bus; } - /* Get IO, memory, and IRQ resources for new devices */ - rc = shpchprm_find_available_resources(ctrl); - ctrl->add_support = !rc; + ctrl->add_support = 1; - if (rc) { - dbg("shpchprm_find_available_resources = %#x\n", rc); - err("unable to locate PCI configuration resources for hot plug add.\n"); - goto err_out_free_ctrl_bus; - } - /* Setup the slot information structures */ rc = init_slots(ctrl); if (rc) { @@ -497,18 +489,6 @@ static int shpc_start_thread(void) return retval; } -static inline void __exit -free_shpchp_res(struct pci_resource *res) -{ - struct pci_resource *tres; - - while (res) { - tres = res; - res = res->next; - kfree(tres); - } -} - static void __exit unload_shpchpd(void) { struct pci_func *next; @@ -522,11 +502,6 @@ static void __exit unload_shpchpd(void) while (ctrl) { cleanup_slots(ctrl); - free_shpchp_res(ctrl->io_head); - free_shpchp_res(ctrl->mem_head); - free_shpchp_res(ctrl->p_mem_head); - free_shpchp_res(ctrl->bus_head); - kfree (ctrl->pci_bus); dbg("%s: calling release_ctlr\n", __FUNCTION__); @@ -541,11 +516,6 @@ static void __exit unload_shpchpd(void) for (loop = 0; loop < 256; loop++) { next = shpchp_slot_list[loop]; while (next != NULL) { - free_shpchp_res(next->io_head); - free_shpchp_res(next->mem_head); - free_shpchp_res(next->p_mem_head); - free_shpchp_res(next->bus_head); - TempSlot = next; next = next->next; kfree(TempSlot); @@ -607,9 +577,7 @@ static int __init shpcd_init(void) if (retval) { shpchprm_cleanup(); shpchp_event_stop_thread(); - } else - shpchprm_print_pirt(); - + } return retval; } diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 91c9903e621f..aa507e453e49 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -38,13 +38,10 @@ #include #include #include +#include "../pci.h" #include "shpchp.h" #include "shpchprm.h" -static u32 configure_new_device(struct controller *ctrl, struct pci_func *func, - u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev); -static int configure_new_function( struct controller *ctrl, struct pci_func *func, - u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev); static void interrupt_event_handler(struct controller *ctrl); static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ @@ -52,9 +49,6 @@ static struct semaphore event_exit; /* guard ensure thread has exited before ca static int event_finished; static unsigned long pushbutton_pending; /* = 0 */ -u8 shpchp_disk_irq; -u8 shpchp_nic_irq; - u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id) { struct controller *ctrl = (struct controller *) inst_id; @@ -260,624 +254,6 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) return rc; } - -/* - * sort_by_size - * - * Sorts nodes on the list by their length. - * Smallest first. - * - */ -static int sort_by_size(struct pci_resource **head) -{ - struct pci_resource *current_res; - struct pci_resource *next_res; - int out_of_order = 1; - - if (!(*head)) - return(1); - - if (!((*head)->next)) - return(0); - - while (out_of_order) { - out_of_order = 0; - - /* Special case for swapping list head */ - if (((*head)->next) && - ((*head)->length > (*head)->next->length)) { - out_of_order++; - current_res = *head; - *head = (*head)->next; - current_res->next = (*head)->next; - (*head)->next = current_res; - } - - current_res = *head; - - while (current_res->next && current_res->next->next) { - if (current_res->next->length > current_res->next->next->length) { - out_of_order++; - next_res = current_res->next; - current_res->next = current_res->next->next; - current_res = current_res->next; - next_res->next = current_res->next; - current_res->next = next_res; - } else - current_res = current_res->next; - } - } /* End of out_of_order loop */ - - return(0); -} - - -/* - * sort_by_max_size - * - * Sorts nodes on the list by their length. - * Largest first. - * - */ -static int sort_by_max_size(struct pci_resource **head) -{ - struct pci_resource *current_res; - struct pci_resource *next_res; - int out_of_order = 1; - - if (!(*head)) - return(1); - - if (!((*head)->next)) - return(0); - - while (out_of_order) { - out_of_order = 0; - - /* Special case for swapping list head */ - if (((*head)->next) && - ((*head)->length < (*head)->next->length)) { - out_of_order++; - current_res = *head; - *head = (*head)->next; - current_res->next = (*head)->next; - (*head)->next = current_res; - } - - current_res = *head; - - while (current_res->next && current_res->next->next) { - if (current_res->next->length < current_res->next->next->length) { - out_of_order++; - next_res = current_res->next; - current_res->next = current_res->next->next; - current_res = current_res->next; - next_res->next = current_res->next; - current_res->next = next_res; - } else - current_res = current_res->next; - } - } /* End of out_of_order loop */ - - return(0); -} - - -/* - * do_pre_bridge_resource_split - * - * Returns zero or one node of resources that aren't in use - * - */ -static struct pci_resource *do_pre_bridge_resource_split (struct pci_resource **head, struct pci_resource **orig_head, u32 alignment) -{ - struct pci_resource *prevnode = NULL; - struct pci_resource *node; - struct pci_resource *split_node; - u32 rc; - u32 temp_dword; - dbg("do_pre_bridge_resource_split\n"); - - if (!(*head) || !(*orig_head)) - return(NULL); - - rc = shpchp_resource_sort_and_combine(head); - - if (rc) - return(NULL); - - if ((*head)->base != (*orig_head)->base) - return(NULL); - - if ((*head)->length == (*orig_head)->length) - return(NULL); - - - /* If we got here, there the bridge requires some of the resource, but - * we may be able to split some off of the front - */ - node = *head; - - if (node->length & (alignment -1)) { - /* This one isn't an aligned length, so we'll make a new entry - * and split it up. - */ - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - temp_dword = (node->length | (alignment-1)) + 1 - alignment; - - split_node->base = node->base; - split_node->length = temp_dword; - - node->length -= temp_dword; - node->base += split_node->length; - - /* Put it in the list */ - *head = split_node; - split_node->next = node; - } - - if (node->length < alignment) { - return(NULL); - } - - /* Now unlink it */ - if (*head == node) { - *head = node->next; - node->next = NULL; - } else { - prevnode = *head; - while (prevnode->next != node) - prevnode = prevnode->next; - - prevnode->next = node->next; - node->next = NULL; - } - - return(node); -} - - -/* - * do_bridge_resource_split - * - * Returns zero or one node of resources that aren't in use - * - */ -static struct pci_resource *do_bridge_resource_split (struct pci_resource **head, u32 alignment) -{ - struct pci_resource *prevnode = NULL; - struct pci_resource *node; - u32 rc; - u32 temp_dword; - - if (!(*head)) - return(NULL); - - rc = shpchp_resource_sort_and_combine(head); - - if (rc) - return(NULL); - - node = *head; - - while (node->next) { - prevnode = node; - node = node->next; - kfree(prevnode); - } - - if (node->length < alignment) { - kfree(node); - return(NULL); - } - - if (node->base & (alignment - 1)) { - /* Short circuit if adjusted size is too small */ - temp_dword = (node->base | (alignment-1)) + 1; - if ((node->length - (temp_dword - node->base)) < alignment) { - kfree(node); - return(NULL); - } - - node->length -= (temp_dword - node->base); - node->base = temp_dword; - } - - if (node->length & (alignment - 1)) { - /* There's stuff in use after this node */ - kfree(node); - return(NULL); - } - - return(node); -} - - -/* - * get_io_resource - * - * this function sorts the resource list by size and then - * returns the first node of "size" length that is not in the - * ISA aliasing window. If it finds a node larger than "size" - * it will split it up. - * - * size must be a power of two. - */ -static struct pci_resource *get_io_resource (struct pci_resource **head, u32 size) -{ - struct pci_resource *prevnode; - struct pci_resource *node; - struct pci_resource *split_node = NULL; - u32 temp_dword; - - if (!(*head)) - return(NULL); - - if ( shpchp_resource_sort_and_combine(head) ) - return(NULL); - - if ( sort_by_size(head) ) - return(NULL); - - for (node = *head; node; node = node->next) { - if (node->length < size) - continue; - - if (node->base & (size - 1)) { - /* This one isn't base aligned properly - so we'll make a new entry and split it up */ - temp_dword = (node->base | (size-1)) + 1; - - /*/ Short circuit if adjusted size is too small */ - if ((node->length - (temp_dword - node->base)) < size) - continue; - - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = node->base; - split_node->length = temp_dword - node->base; - node->base = temp_dword; - node->length -= split_node->length; - - /* Put it in the list */ - split_node->next = node->next; - node->next = split_node; - } /* End of non-aligned base */ - - /* Don't need to check if too small since we already did */ - if (node->length > size) { - /* This one is longer than we need - so we'll make a new entry and split it up */ - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = node->base + size; - split_node->length = node->length - size; - node->length = size; - - /* Put it in the list */ - split_node->next = node->next; - node->next = split_node; - } /* End of too big on top end */ - - /* For IO make sure it's not in the ISA aliasing space */ - if (node->base & 0x300L) - continue; - - /* If we got here, then it is the right size - Now take it out of the list */ - if (*head == node) { - *head = node->next; - } else { - prevnode = *head; - while (prevnode->next != node) - prevnode = prevnode->next; - - prevnode->next = node->next; - } - node->next = NULL; - /* Stop looping */ - break; - } - - return(node); -} - - -/* - * get_max_resource - * - * Gets the largest node that is at least "size" big from the - * list pointed to by head. It aligns the node on top and bottom - * to "size" alignment before returning it. - * J.I. modified to put max size limits of; 64M->32M->16M->8M->4M->1M - * This is needed to avoid allocating entire ACPI _CRS res to one child bridge/slot. - */ -static struct pci_resource *get_max_resource (struct pci_resource **head, u32 size) -{ - struct pci_resource *max; - struct pci_resource *temp; - struct pci_resource *split_node; - u32 temp_dword; - u32 max_size[] = { 0x4000000, 0x2000000, 0x1000000, 0x0800000, 0x0400000, 0x0200000, 0x0100000, 0x00 }; - int i; - - if (!(*head)) - return(NULL); - - if (shpchp_resource_sort_and_combine(head)) - return(NULL); - - if (sort_by_max_size(head)) - return(NULL); - - for (max = *head;max; max = max->next) { - - /* If not big enough we could probably just bail, - instead we'll continue to the next. */ - if (max->length < size) - continue; - - if (max->base & (size - 1)) { - /* This one isn't base aligned properly - so we'll make a new entry and split it up */ - temp_dword = (max->base | (size-1)) + 1; - - /* Short circuit if adjusted size is too small */ - if ((max->length - (temp_dword - max->base)) < size) - continue; - - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = max->base; - split_node->length = temp_dword - max->base; - max->base = temp_dword; - max->length -= split_node->length; - - /* Put it next in the list */ - split_node->next = max->next; - max->next = split_node; - } - - if ((max->base + max->length) & (size - 1)) { - /* This one isn't end aligned properly at the top - so we'll make a new entry and split it up */ - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - temp_dword = ((max->base + max->length) & ~(size - 1)); - split_node->base = temp_dword; - split_node->length = max->length + max->base - - split_node->base; - max->length -= split_node->length; - - /* Put it in the list */ - split_node->next = max->next; - max->next = split_node; - } - - /* Make sure it didn't shrink too much when we aligned it */ - if (max->length < size) - continue; - - for ( i = 0; max_size[i] > size; i++) { - if (max->length > max_size[i]) { - split_node = kmalloc(sizeof(*split_node), - GFP_KERNEL); - if (!split_node) - break; /* return (NULL); */ - split_node->base = max->base + max_size[i]; - split_node->length = max->length - max_size[i]; - max->length = max_size[i]; - /* Put it next in the list */ - split_node->next = max->next; - max->next = split_node; - break; - } - } - - /* Now take it out of the list */ - temp = (struct pci_resource*) *head; - if (temp == max) { - *head = max->next; - } else { - while (temp && temp->next != max) { - temp = temp->next; - } - - temp->next = max->next; - } - - max->next = NULL; - return(max); - } - - /* If we get here, we couldn't find one */ - return(NULL); -} - - -/* - * get_resource - * - * this function sorts the resource list by size and then - * returns the first node of "size" length. If it finds a node - * larger than "size" it will split it up. - * - * size must be a power of two. - */ -static struct pci_resource *get_resource (struct pci_resource **head, u32 size) -{ - struct pci_resource *prevnode; - struct pci_resource *node; - struct pci_resource *split_node; - u32 temp_dword; - - if (!(*head)) - return(NULL); - - if ( shpchp_resource_sort_and_combine(head) ) - return(NULL); - - if ( sort_by_size(head) ) - return(NULL); - - for (node = *head; node; node = node->next) { - dbg("%s: req_size =0x%x node=%p, base=0x%x, length=0x%x\n", - __FUNCTION__, size, node, node->base, node->length); - if (node->length < size) - continue; - - if (node->base & (size - 1)) { - dbg("%s: not aligned\n", __FUNCTION__); - /* this one isn't base aligned properly - so we'll make a new entry and split it up */ - temp_dword = (node->base | (size-1)) + 1; - - /* Short circuit if adjusted size is too small */ - if ((node->length - (temp_dword - node->base)) < size) - continue; - - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = node->base; - split_node->length = temp_dword - node->base; - node->base = temp_dword; - node->length -= split_node->length; - - /* Put it in the list */ - split_node->next = node->next; - node->next = split_node; - } /* End of non-aligned base */ - - /* Don't need to check if too small since we already did */ - if (node->length > size) { - dbg("%s: too big\n", __FUNCTION__); - /* this one is longer than we need - so we'll make a new entry and split it up */ - split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); - - if (!split_node) - return(NULL); - - split_node->base = node->base + size; - split_node->length = node->length - size; - node->length = size; - - /* Put it in the list */ - split_node->next = node->next; - node->next = split_node; - } /* End of too big on top end */ - - dbg("%s: got one!!!\n", __FUNCTION__); - /* If we got here, then it is the right size - Now take it out of the list */ - if (*head == node) { - *head = node->next; - } else { - prevnode = *head; - while (prevnode->next != node) - prevnode = prevnode->next; - - prevnode->next = node->next; - } - node->next = NULL; - /* Stop looping */ - break; - } - return(node); -} - - -/* - * shpchp_resource_sort_and_combine - * - * Sorts all of the nodes in the list in ascending order by - * their base addresses. Also does garbage collection by - * combining adjacent nodes. - * - * returns 0 if success - */ -int shpchp_resource_sort_and_combine(struct pci_resource **head) -{ - struct pci_resource *node1; - struct pci_resource *node2; - int out_of_order = 1; - - dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head); - - if (!(*head)) - return(1); - - dbg("*head->next = %p\n",(*head)->next); - - if (!(*head)->next) - return(0); /* only one item on the list, already sorted! */ - - dbg("*head->base = 0x%x\n",(*head)->base); - dbg("*head->next->base = 0x%x\n",(*head)->next->base); - while (out_of_order) { - out_of_order = 0; - - /* Special case for swapping list head */ - if (((*head)->next) && - ((*head)->base > (*head)->next->base)) { - node1 = *head; - (*head) = (*head)->next; - node1->next = (*head)->next; - (*head)->next = node1; - out_of_order++; - } - - node1 = (*head); - - while (node1->next && node1->next->next) { - if (node1->next->base > node1->next->next->base) { - out_of_order++; - node2 = node1->next; - node1->next = node1->next->next; - node1 = node1->next; - node2->next = node1->next; - node1->next = node2; - } else - node1 = node1->next; - } - } /* End of out_of_order loop */ - - node1 = *head; - - while (node1 && node1->next) { - if ((node1->base + node1->length) == node1->next->base) { - /* Combine */ - dbg("8..\n"); - node1->length += node1->next->length; - node2 = node1->next; - node1->next = node1->next->next; - kfree(node2); - } else - node1 = node1->next; - } - - return(0); -} - - /** * shpchp_slot_create - Creates a node and adds it to the proper bus. * @busnumber - bus where new node is to be located @@ -933,7 +309,6 @@ static int slot_remove(struct pci_func * old_slot) if (next == old_slot) { shpchp_slot_list[old_slot->bus] = old_slot->next; - shpchp_destroy_board_resources(old_slot); kfree(old_slot); return(0); } @@ -944,7 +319,6 @@ static int slot_remove(struct pci_func * old_slot) if (next->next == old_slot) { next->next = old_slot->next; - shpchp_destroy_board_resources(old_slot); kfree(old_slot); return(0); } else @@ -1120,12 +494,8 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) { u8 hp_slot; u8 slots_not_empty = 0; - int index; - u32 temp_register = 0xFFFFFFFF; - u32 retval, rc = 0; - struct pci_func *new_func = NULL; + u32 rc = 0; struct slot *p_slot; - struct resource_lists res_lists; enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed; u8 pi, mode; @@ -1328,135 +698,65 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) /* Check for a power fault */ if (func->status == 0xFF) { /* power fault occurred, but it was benign */ - temp_register = 0xFFFFFFFF; - dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register); + dbg("%s: power fault\n", __FUNCTION__); rc = POWER_FAILURE; func->status = 0; - } else { - /* Get vendor/device ID u32 */ - rc = pci_bus_read_config_dword (ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function), - PCI_VENDOR_ID, &temp_register); - dbg("%s: pci_bus_read_config_dword returns %d\n", __FUNCTION__, rc); - dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register); - - if (rc != 0) { - /* Something's wrong here */ - temp_register = 0xFFFFFFFF; - dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register); - } - /* Preset return code. It will be changed later if things go okay. */ - rc = NO_ADAPTER_PRESENT; + goto err_exit; } - /* All F's is an empty slot or an invalid board */ - if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */ - res_lists.io_head = ctrl->io_head; - res_lists.mem_head = ctrl->mem_head; - res_lists.p_mem_head = ctrl->p_mem_head; - res_lists.bus_head = ctrl->bus_head; - res_lists.irqs = NULL; - - rc = configure_new_device(ctrl, func, 0, &res_lists, 0, 0); - dbg("%s: back from configure_new_device\n", __FUNCTION__); - - ctrl->io_head = res_lists.io_head; - ctrl->mem_head = res_lists.mem_head; - ctrl->p_mem_head = res_lists.p_mem_head; - ctrl->bus_head = res_lists.bus_head; - - shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - shpchp_resource_sort_and_combine(&(ctrl->io_head)); - shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - - if (rc) { - /* Wait for exclusive access to hardware */ - down(&ctrl->crit_sect); - - /* turn off slot, turn on Amber LED, turn off Green LED */ - retval = p_slot->hpc_ops->slot_disable(p_slot); - if (retval) { - err("%s: Issue of Slot Enable command failed\n", __FUNCTION__); - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); - return retval; - } - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); - - retval = p_slot->hpc_ops->check_cmd_status(ctrl); - if (retval) { - err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, retval); - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); - return retval; - } + if (shpchp_configure_device(p_slot)) { + err("Cannot add device at 0x%x:0x%x\n", p_slot->bus, + p_slot->device); + goto err_exit; + } - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); + shpchp_save_slot_config(ctrl, func); - return(rc); - } - shpchp_save_slot_config(ctrl, func); + func->status = 0; + func->switch_save = 0x10; + func->is_a_board = 0x01; + func->pwr_save = 1; - func->status = 0; - func->switch_save = 0x10; - func->is_a_board = 0x01; - func->pwr_save = 1; + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); - /* Next, we will instantiate the linux pci_dev structures - * (with appropriate driver notification, if already present) - */ - index = 0; - do { - new_func = shpchp_slot_find(ctrl->slot_bus, func->device, index++); - if (new_func && !new_func->pci_dev) { - dbg("%s:call pci_hp_configure_dev\n", __FUNCTION__); - shpchp_configure_device(ctrl, new_func); - } - } while (new_func); + p_slot->hpc_ops->green_led_on(p_slot); - /* Wait for exclusive access to hardware */ - down(&ctrl->crit_sect); + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); - p_slot->hpc_ops->green_led_on(p_slot); + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); + return 0; +err_exit: + /* Wait for exclusive access to hardware */ + down(&ctrl->crit_sect); + /* turn off slot, turn on Amber LED, turn off Green LED */ + rc = p_slot->hpc_ops->slot_disable(p_slot); + if (rc) { + err("%s: Issue of Slot Disable command failed\n", __FUNCTION__); /* Done with exclusive hardware access */ up(&ctrl->crit_sect); + return rc; + } + /* Wait for the command to complete */ + wait_for_ctrl_irq (ctrl); - } else { - /* Wait for exclusive access to hardware */ - down(&ctrl->crit_sect); - - /* turn off slot, turn on Amber LED, turn off Green LED */ - rc = p_slot->hpc_ops->slot_disable(p_slot); - if (rc) { - err("%s: Issue of Slot Disable command failed\n", __FUNCTION__); - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); - return rc; - } - /* Wait for the command to complete */ - wait_for_ctrl_irq (ctrl); - - rc = p_slot->hpc_ops->check_cmd_status(ctrl); - if (rc) { - err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc); - /* Done with exclusive hardware access */ - up(&ctrl->crit_sect); - return rc; - } - + rc = p_slot->hpc_ops->check_cmd_status(ctrl); + if (rc) { + err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc); /* Done with exclusive hardware access */ up(&ctrl->crit_sect); - - return(rc); + return rc; } - return 0; + + /* Done with exclusive hardware access */ + up(&ctrl->crit_sect); + + return(rc); } @@ -1466,13 +766,9 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) */ static u32 remove_board(struct pci_func *func, struct controller *ctrl) { - int index; - u8 skip = 0; u8 device; u8 hp_slot; u32 rc; - struct resource_lists res_lists; - struct pci_func *temp_func; struct slot *p_slot; if (func == NULL) @@ -1488,27 +784,6 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); - if ((ctrl->add_support) && - !(func->bus_head || func->mem_head || func->p_mem_head || func->io_head)) { - /* Here we check to see if we've saved any of the board's - * resources already. If so, we'll skip the attempt to - * determine what's being used. - */ - index = 0; - - temp_func = func; - - while ((temp_func = shpchp_slot_find(temp_func->bus, temp_func->device, index++))) { - if (temp_func->bus_head || temp_func->mem_head - || temp_func->p_mem_head || temp_func->io_head) { - skip = 1; - break; - } - } - - if (!skip) - rc = shpchp_save_used_resources(ctrl, func, DISABLE_CARD); - } /* Change status to shutdown */ if (func->is_a_board) func->status = 0x01; @@ -1551,26 +826,6 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) if (ctrl->add_support) { while (func) { - res_lists.io_head = ctrl->io_head; - res_lists.mem_head = ctrl->mem_head; - res_lists.p_mem_head = ctrl->p_mem_head; - res_lists.bus_head = ctrl->bus_head; - - dbg("Returning resources to ctlr lists for (B/D/F) = (%#x/%#x/%#x)\n", func->bus, - func->device, func->function); - - shpchp_return_board_resources(func, &res_lists); - - ctrl->io_head = res_lists.io_head; - ctrl->mem_head = res_lists.mem_head; - ctrl->p_mem_head = res_lists.p_mem_head; - ctrl->bus_head = res_lists.bus_head; - - shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - shpchp_resource_sort_and_combine(&(ctrl->io_head)); - shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - if (is_bridge(func)) { dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); @@ -2050,798 +1305,3 @@ int shpchp_disable_slot (struct slot *p_slot) return rc; } - -/** - * configure_new_device - Configures the PCI header information of one board. - * - * @ctrl: pointer to controller structure - * @func: pointer to function structure - * @behind_bridge: 1 if this is a recursive call, 0 if not - * @resources: pointer to set of resource lists - * - * Returns 0 if success - * - */ -static u32 configure_new_device (struct controller * ctrl, struct pci_func * func, - u8 behind_bridge, struct resource_lists * resources, u8 bridge_bus, u8 bridge_dev) -{ - u8 temp_byte, function, max_functions, stop_it; - int rc; - u32 ID; - struct pci_func *new_slot; - struct pci_bus lpci_bus, *pci_bus; - int index; - - new_slot = func; - - dbg("%s\n", __FUNCTION__); - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - - /* Check for Multi-function device */ - rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte); - if (rc) { - dbg("%s: rc = %d\n", __FUNCTION__, rc); - return rc; - } - - if (temp_byte & 0x80) /* Multi-function device */ - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - rc = configure_new_function(ctrl, new_slot, behind_bridge, resources, bridge_bus, bridge_dev); - - if (rc) { - dbg("configure_new_function failed %d\n",rc); - index = 0; - - while (new_slot) { - new_slot = shpchp_slot_find(new_slot->bus, new_slot->device, index++); - - if (new_slot) - shpchp_return_board_resources(new_slot, resources); - } - - return(rc); - } - - function++; - - stop_it = 0; - - /* The following loop skips to the next present function - * and creates a board structure - */ - - while ((function < max_functions) && (!stop_it)) { - pci_bus_read_config_dword(pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID); - - if (ID == 0xFFFFFFFF) { /* There's nothing there. */ - function++; - } else { /* There's something there */ - /* Setup slot structure. */ - new_slot = shpchp_slot_create(func->bus); - - if (new_slot == NULL) { - /* Out of memory */ - return(1); - } - - new_slot->bus = func->bus; - new_slot->device = func->device; - new_slot->function = function; - new_slot->is_a_board = 1; - new_slot->status = 0; - - stop_it++; - } - } - - } while (function < max_functions); - dbg("returning from configure_new_device\n"); - - return 0; -} - - -/* - * Configuration logic that involves the hotplug data structures and - * their bookkeeping - */ - - -/** - * configure_new_function - Configures the PCI header information of one device - * - * @ctrl: pointer to controller structure - * @func: pointer to function structure - * @behind_bridge: 1 if this is a recursive call, 0 if not - * @resources: pointer to set of resource lists - * - * Calls itself recursively for bridged devices. - * Returns 0 if success - * - */ -static int configure_new_function (struct controller * ctrl, struct pci_func * func, - u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev) -{ - int cloop; - u8 temp_byte; - u8 device; - u8 class_code; - u16 temp_word; - u32 rc; - u32 temp_register; - u32 base; - u32 ID; - unsigned int devfn; - struct pci_resource *mem_node; - struct pci_resource *p_mem_node; - struct pci_resource *io_node; - struct pci_resource *bus_node; - struct pci_resource *hold_mem_node; - struct pci_resource *hold_p_mem_node; - struct pci_resource *hold_IO_node; - struct pci_resource *hold_bus_node; - struct irq_mapping irqs; - struct pci_func *new_slot; - struct pci_bus lpci_bus, *pci_bus; - struct resource_lists temp_resources; -#if defined(CONFIG_X86_64) - u8 IRQ=0; -#endif - - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - /* Check for Bridge */ - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte); - if (rc) - return rc; - - if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ - /* set Primary bus */ - dbg("set Primary bus = 0x%x\n", func->bus); - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus); - if (rc) - return rc; - - /* find range of busses to use */ - bus_node = get_max_resource(&resources->bus_head, 1L); - - /* If we don't have any busses to allocate, we can't continue */ - if (!bus_node) { - err("Got NO bus resource to use\n"); - return -ENOMEM; - } - dbg("Got ranges of buses to use: base:len=0x%x:%x\n", bus_node->base, bus_node->length); - - /* set Secondary bus */ - temp_byte = (u8)bus_node->base; - dbg("set Secondary bus = 0x%x\n", temp_byte); - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte); - if (rc) - return rc; - - /* set subordinate bus */ - temp_byte = (u8)(bus_node->base + bus_node->length - 1); - dbg("set subordinate bus = 0x%x\n", temp_byte); - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte); - if (rc) - return rc; - - /* Set HP parameters (Cache Line Size, Latency Timer) */ - rc = shpchprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_BRIDGE); - if (rc) - return rc; - - /* Setup the IO, memory, and prefetchable windows */ - - io_node = get_max_resource(&(resources->io_head), 0x1000L); - if (io_node) { - dbg("io_node(base, len, next) (%x, %x, %p)\n", io_node->base, io_node->length, io_node->next); - } - - mem_node = get_max_resource(&(resources->mem_head), 0x100000L); - if (mem_node) { - dbg("mem_node(base, len, next) (%x, %x, %p)\n", mem_node->base, mem_node->length, mem_node->next); - } - - if (resources->p_mem_head) - p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000L); - else { - /* - * In some platform implementation, MEM and PMEM are not - * distinguished, and hence ACPI _CRS has only MEM entries - * for both MEM and PMEM. - */ - dbg("using MEM for PMEM\n"); - p_mem_node = get_max_resource(&(resources->mem_head), 0x100000L); - } - if (p_mem_node) { - dbg("p_mem_node(base, len, next) (%x, %x, %p)\n", p_mem_node->base, p_mem_node->length, p_mem_node->next); - } - - /* set up the IRQ info */ - if (!resources->irqs) { - irqs.barber_pole = 0; - irqs.interrupt[0] = 0; - irqs.interrupt[1] = 0; - irqs.interrupt[2] = 0; - irqs.interrupt[3] = 0; - irqs.valid_INT = 0; - } else { - irqs.barber_pole = resources->irqs->barber_pole; - irqs.interrupt[0] = resources->irqs->interrupt[0]; - irqs.interrupt[1] = resources->irqs->interrupt[1]; - irqs.interrupt[2] = resources->irqs->interrupt[2]; - irqs.interrupt[3] = resources->irqs->interrupt[3]; - irqs.valid_INT = resources->irqs->valid_INT; - } - - /* set up resource lists that are now aligned on top and bottom - * for anything behind the bridge. - */ - temp_resources.bus_head = bus_node; - temp_resources.io_head = io_node; - temp_resources.mem_head = mem_node; - temp_resources.p_mem_head = p_mem_node; - temp_resources.irqs = &irqs; - - /* Make copies of the nodes we are going to pass down so that - * if there is a problem,we can just use these to free resources - */ - hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL); - hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL); - hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL); - hold_p_mem_node = kmalloc(sizeof(*hold_p_mem_node), GFP_KERNEL); - - if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) { - kfree(hold_bus_node); - kfree(hold_IO_node); - kfree(hold_mem_node); - kfree(hold_p_mem_node); - - return 1; - } - - memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource)); - - bus_node->base += 1; - bus_node->length -= 1; - bus_node->next = NULL; - - /* If we have IO resources copy them and fill in the bridge's - * IO range registers - */ - if (io_node) { - memcpy(hold_IO_node, io_node, sizeof(struct pci_resource)); - io_node->next = NULL; - - /* set IO base and Limit registers */ - RES_CHECK(io_node->base, 8); - temp_byte = (u8)(io_node->base >> 8); - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte); - - RES_CHECK(io_node->base + io_node->length - 1, 8); - temp_byte = (u8)((io_node->base + io_node->length - 1) >> 8); - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte); - } else { - kfree(hold_IO_node); - hold_IO_node = NULL; - } - - /* If we have memory resources copy them and fill in the bridge's - * memory range registers. Otherwise, fill in the range - * registers with values that disable them. - */ - if (mem_node) { - memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource)); - mem_node->next = NULL; - - /* set Mem base and Limit registers */ - RES_CHECK(mem_node->base, 16); - temp_word = (u32)(mem_node->base >> 16); - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word); - - RES_CHECK(mem_node->base + mem_node->length - 1, 16); - temp_word = (u32)((mem_node->base + mem_node->length - 1) >> 16); - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); - } else { - temp_word = 0xFFFF; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word); - - temp_word = 0x0000; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); - - kfree(hold_mem_node); - hold_mem_node = NULL; - } - - /* If we have prefetchable memory resources copy them and - * fill in the bridge's memory range registers. Otherwise, - * fill in the range registers with values that disable them. - */ - if (p_mem_node) { - memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource)); - p_mem_node->next = NULL; - - /* set Pre Mem base and Limit registers */ - RES_CHECK(p_mem_node->base, 16); - temp_word = (u32)(p_mem_node->base >> 16); - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); - - RES_CHECK(p_mem_node->base + p_mem_node->length - 1, 16); - temp_word = (u32)((p_mem_node->base + p_mem_node->length - 1) >> 16); - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - } else { - temp_word = 0xFFFF; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); - - temp_word = 0x0000; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - - kfree(hold_p_mem_node); - hold_p_mem_node = NULL; - } - - /* Adjust this to compensate for extra adjustment in first loop */ - irqs.barber_pole--; - - rc = 0; - - /* Here we actually find the devices and configure them */ - for (device = 0; (device <= 0x1F) && !rc; device++) { - irqs.barber_pole = (irqs.barber_pole + 1) & 0x03; - - ID = 0xFFFFFFFF; - pci_bus->number = hold_bus_node->base; - pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0), - PCI_VENDOR_ID, &ID); - pci_bus->number = func->bus; - - if (ID != 0xFFFFFFFF) { /* device Present */ - /* Setup slot structure. */ - new_slot = shpchp_slot_create(hold_bus_node->base); - - if (new_slot == NULL) { - /* Out of memory */ - rc = -ENOMEM; - continue; - } - - new_slot->bus = hold_bus_node->base; - new_slot->device = device; - new_slot->function = 0; - new_slot->is_a_board = 1; - new_slot->status = 0; - - rc = configure_new_device(ctrl, new_slot, 1, &temp_resources, func->bus, func->device); - dbg("configure_new_device rc=0x%x\n",rc); - } /* End of IF (device in slot?) */ - } /* End of FOR loop */ - - if (rc) { - shpchp_destroy_resource_list(&temp_resources); - - return_resource(&(resources->bus_head), hold_bus_node); - return_resource(&(resources->io_head), hold_IO_node); - return_resource(&(resources->mem_head), hold_mem_node); - return_resource(&(resources->p_mem_head), hold_p_mem_node); - return(rc); - } - - /* save the interrupt routing information */ - if (resources->irqs) { - resources->irqs->interrupt[0] = irqs.interrupt[0]; - resources->irqs->interrupt[1] = irqs.interrupt[1]; - resources->irqs->interrupt[2] = irqs.interrupt[2]; - resources->irqs->interrupt[3] = irqs.interrupt[3]; - resources->irqs->valid_INT = irqs.valid_INT; - } else if (!behind_bridge) { - /* We need to hook up the interrupts here */ - for (cloop = 0; cloop < 4; cloop++) { - if (irqs.valid_INT & (0x01 << cloop)) { - rc = shpchp_set_irq(func->bus, func->device, - 0x0A + cloop, irqs.interrupt[cloop]); - if (rc) { - shpchp_destroy_resource_list (&temp_resources); - return_resource(&(resources->bus_head), hold_bus_node); - return_resource(&(resources->io_head), hold_IO_node); - return_resource(&(resources->mem_head), hold_mem_node); - return_resource(&(resources->p_mem_head), hold_p_mem_node); - return rc; - } - } - } /* end of for loop */ - } - - /* Return unused bus resources - * First use the temporary node to store information for the board - */ - if (hold_bus_node && bus_node && temp_resources.bus_head) { - hold_bus_node->length = bus_node->base - hold_bus_node->base; - - hold_bus_node->next = func->bus_head; - func->bus_head = hold_bus_node; - - temp_byte = (u8)(temp_resources.bus_head->base - 1); - - /* set subordinate bus */ - dbg("re-set subordinate bus = 0x%x\n", temp_byte); - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte); - - if (temp_resources.bus_head->length == 0) { - kfree(temp_resources.bus_head); - temp_resources.bus_head = NULL; - } else { - dbg("return bus res of b:d(0x%x:%x) base:len(0x%x:%x)\n", - func->bus, func->device, temp_resources.bus_head->base, temp_resources.bus_head->length); - return_resource(&(resources->bus_head), temp_resources.bus_head); - } - } - - /* If we have IO space available and there is some left, - * return the unused portion - */ - if (hold_IO_node && temp_resources.io_head) { - io_node = do_pre_bridge_resource_split(&(temp_resources.io_head), - &hold_IO_node, 0x1000); - - /* Check if we were able to split something off */ - if (io_node) { - hold_IO_node->base = io_node->base + io_node->length; - - RES_CHECK(hold_IO_node->base, 8); - temp_byte = (u8)((hold_IO_node->base) >> 8); - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_BASE, temp_byte); - - return_resource(&(resources->io_head), io_node); - } - - io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000); - - /* Check if we were able to split something off */ - if (io_node) { - /* First use the temporary node to store information for the board */ - hold_IO_node->length = io_node->base - hold_IO_node->base; - - /* If we used any, add it to the board's list */ - if (hold_IO_node->length) { - hold_IO_node->next = func->io_head; - func->io_head = hold_IO_node; - - RES_CHECK(io_node->base - 1, 8); - temp_byte = (u8)((io_node->base - 1) >> 8); - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte); - - return_resource(&(resources->io_head), io_node); - } else { - /* it doesn't need any IO */ - temp_byte = 0x00; - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte); - - return_resource(&(resources->io_head), io_node); - kfree(hold_IO_node); - } - } else { - /* it used most of the range */ - hold_IO_node->next = func->io_head; - func->io_head = hold_IO_node; - } - } else if (hold_IO_node) { - /* it used the whole range */ - hold_IO_node->next = func->io_head; - func->io_head = hold_IO_node; - } - - /* If we have memory space available and there is some left, - * return the unused portion - */ - if (hold_mem_node && temp_resources.mem_head) { - mem_node = do_pre_bridge_resource_split(&(temp_resources.mem_head), &hold_mem_node, 0x100000L); - - /* Check if we were able to split something off */ - if (mem_node) { - hold_mem_node->base = mem_node->base + mem_node->length; - - RES_CHECK(hold_mem_node->base, 16); - temp_word = (u32)((hold_mem_node->base) >> 16); - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word); - - return_resource(&(resources->mem_head), mem_node); - } - - mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000L); - - /* Check if we were able to split something off */ - if (mem_node) { - /* First use the temporary node to store information for the board */ - hold_mem_node->length = mem_node->base - hold_mem_node->base; - - if (hold_mem_node->length) { - hold_mem_node->next = func->mem_head; - func->mem_head = hold_mem_node; - - /* configure end address */ - RES_CHECK(mem_node->base - 1, 16); - temp_word = (u32)((mem_node->base - 1) >> 16); - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); - - /* Return unused resources to the pool */ - return_resource(&(resources->mem_head), mem_node); - } else { - /* it doesn't need any Mem */ - temp_word = 0x0000; - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word); - - return_resource(&(resources->mem_head), mem_node); - kfree(hold_mem_node); - } - } else { - /* it used most of the range */ - hold_mem_node->next = func->mem_head; - func->mem_head = hold_mem_node; - } - } else if (hold_mem_node) { - /* it used the whole range */ - hold_mem_node->next = func->mem_head; - func->mem_head = hold_mem_node; - } - - /* If we have prefetchable memory space available and there is some - * left at the end, return the unused portion - */ - if (hold_p_mem_node && temp_resources.p_mem_head) { - p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head), - &hold_p_mem_node, 0x100000L); - - /* Check if we were able to split something off */ - if (p_mem_node) { - hold_p_mem_node->base = p_mem_node->base + p_mem_node->length; - - RES_CHECK(hold_p_mem_node->base, 16); - temp_word = (u32)((hold_p_mem_node->base) >> 16); - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word); - - return_resource(&(resources->p_mem_head), p_mem_node); - } - - p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000L); - - /* Check if we were able to split something off */ - if (p_mem_node) { - /* First use the temporary node to store information for the board */ - hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base; - - /* If we used any, add it to the board's list */ - if (hold_p_mem_node->length) { - hold_p_mem_node->next = func->p_mem_head; - func->p_mem_head = hold_p_mem_node; - - RES_CHECK(p_mem_node->base - 1, 16); - temp_word = (u32)((p_mem_node->base - 1) >> 16); - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - - return_resource(&(resources->p_mem_head), p_mem_node); - } else { - /* it doesn't need any PMem */ - temp_word = 0x0000; - rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - - return_resource(&(resources->p_mem_head), p_mem_node); - kfree(hold_p_mem_node); - } - } else { - /* it used the most of the range */ - hold_p_mem_node->next = func->p_mem_head; - func->p_mem_head = hold_p_mem_node; - } - } else if (hold_p_mem_node) { - /* it used the whole range */ - hold_p_mem_node->next = func->p_mem_head; - func->p_mem_head = hold_p_mem_node; - } - - /* We should be configuring an IRQ and the bridge's base address - * registers if it needs them. Although we have never seen such - * a device - */ - - shpchprm_enable_card(ctrl, func, PCI_HEADER_TYPE_BRIDGE); - - dbg("PCI Bridge Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); - } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) { - /* Standard device */ - u64 base64; - rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - - if (class_code == PCI_BASE_CLASS_DISPLAY) - return (DEVICE_TYPE_NOT_SUPPORTED); - - /* Figure out IO and memory needs */ - for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) { - temp_register = 0xFFFFFFFF; - - rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); - rc = pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register); - dbg("Bar[%x]=0x%x on bus:dev:func(0x%x:%x:%x)\n", cloop, temp_register, func->bus, func->device, - func->function); - - if (!temp_register) - continue; - - base64 = 0L; - if (temp_register & PCI_BASE_ADDRESS_SPACE_IO) { - /* Map IO */ - - /* set base = amount of IO space */ - base = temp_register & 0xFFFFFFFC; - base = ~base + 1; - - dbg("NEED IO length(0x%x)\n", base); - io_node = get_io_resource(&(resources->io_head),(ulong)base); - - /* allocate the resource to the board */ - if (io_node) { - dbg("Got IO base=0x%x(length=0x%x)\n", io_node->base, io_node->length); - base = (u32)io_node->base; - io_node->next = func->io_head; - func->io_head = io_node; - } else { - err("Got NO IO resource(length=0x%x)\n", base); - return -ENOMEM; - } - } else { /* map MEM */ - int prefetchable = 1; - struct pci_resource **res_node = &func->p_mem_head; - char *res_type_str = "PMEM"; - u32 temp_register2; - - if (!(temp_register & PCI_BASE_ADDRESS_MEM_PREFETCH)) { - prefetchable = 0; - res_node = &func->mem_head; - res_type_str++; - } - - base = temp_register & 0xFFFFFFF0; - base = ~base + 1; - - switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) { - case PCI_BASE_ADDRESS_MEM_TYPE_32: - dbg("NEED 32 %s bar=0x%x(length=0x%x)\n", res_type_str, temp_register, base); - - if (prefetchable && resources->p_mem_head) - mem_node=get_resource(&(resources->p_mem_head), (ulong)base); - else { - if (prefetchable) - dbg("using MEM for PMEM\n"); - mem_node=get_resource(&(resources->mem_head), (ulong)base); - } - - /* allocate the resource to the board */ - if (mem_node) { - base = (u32)mem_node->base; - mem_node->next = *res_node; - *res_node = mem_node; - dbg("Got 32 %s base=0x%x(length=0x%x)\n", res_type_str, mem_node->base, - mem_node->length); - } else { - err("Got NO 32 %s resource(length=0x%x)\n", res_type_str, base); - return -ENOMEM; - } - break; - case PCI_BASE_ADDRESS_MEM_TYPE_64: - rc = pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2); - dbg("NEED 64 %s bar=0x%x:%x(length=0x%x)\n", res_type_str, temp_register2, - temp_register, base); - - if (prefetchable && resources->p_mem_head) - mem_node = get_resource(&(resources->p_mem_head), (ulong)base); - else { - if (prefetchable) - dbg("using MEM for PMEM\n"); - mem_node = get_resource(&(resources->mem_head), (ulong)base); - } - - /* allocate the resource to the board */ - if (mem_node) { - base64 = mem_node->base; - mem_node->next = *res_node; - *res_node = mem_node; - dbg("Got 64 %s base=0x%x:%x(length=%x)\n", res_type_str, (u32)(base64 >> 32), - (u32)base64, mem_node->length); - } else { - err("Got NO 64 %s resource(length=0x%x)\n", res_type_str, base); - return -ENOMEM; - } - break; - default: - dbg("reserved BAR type=0x%x\n", temp_register); - break; - } - - } - - if (base64) { - rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64); - cloop += 4; - base64 >>= 32; - - if (base64) { - dbg("%s: high dword of base64(0x%x) set to 0\n", __FUNCTION__, (u32)base64); - base64 = 0x0L; - } - - rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64); - } else { - rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base); - } - } /* End of base register loop */ - -#if defined(CONFIG_X86_64) - /* Figure out which interrupt pin this function uses */ - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_INTERRUPT_PIN, &temp_byte); - - /* If this function needs an interrupt and we are behind a bridge - and the pin is tied to something that's alread mapped, - set this one the same - */ - if (temp_byte && resources->irqs && - (resources->irqs->valid_INT & - (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) { - /* We have to share with something already set up */ - IRQ = resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03]; - } else { - /* Program IRQ based on card type */ - rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - - if (class_code == PCI_BASE_CLASS_STORAGE) { - IRQ = shpchp_disk_irq; - } else { - IRQ = shpchp_nic_irq; - } - } - - /* IRQ Line */ - rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_INTERRUPT_LINE, IRQ); - - if (!behind_bridge) { - rc = shpchp_set_irq(func->bus, func->device, temp_byte + 0x09, IRQ); - if (rc) - return(1); - } else { - /* TBD - this code may also belong in the other clause of this If statement */ - resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ; - resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03; - } -#endif - /* Disable ROM base Address */ - rc = pci_bus_write_config_dword (pci_bus, devfn, PCI_ROM_ADDRESS, 0x00); - - /* Set HP parameters (Cache Line Size, Latency Timer) */ - rc = shpchprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_NORMAL); - if (rc) - return rc; - - shpchprm_enable_card(ctrl, func, PCI_HEADER_TYPE_NORMAL); - - dbg("PCI function Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); - } /* End of Not-A-Bridge else */ - else { - /* It's some strange type of PCI adapter (Cardbus?) */ - return(DEVICE_TYPE_NOT_SUPPORTED); - } - - func->configured = 1; - - return 0; -} - diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index d867099114ec..89e404805777 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -37,46 +37,69 @@ #include #include "../pci.h" #include "shpchp.h" -#ifndef CONFIG_IA64 -#include "../../../arch/i386/pci/pci.h" /* horrible hack showing how processor dependant we are... */ -#endif -int shpchp_configure_device (struct controller* ctrl, struct pci_func* func) +int shpchp_configure_device(struct slot *p_slot) { - unsigned char bus; - struct pci_bus *child; - int num; - - if (func->pci_dev == NULL) - func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function)); - - /* Still NULL ? Well then scan for it ! */ - if (func->pci_dev == NULL) { - num = pci_scan_slot(ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function)); - if (num) { - dbg("%s: subordiante %p number %x\n", __FUNCTION__, ctrl->pci_dev->subordinate, - ctrl->pci_dev->subordinate->number); - pci_bus_add_devices(ctrl->pci_dev->subordinate); - } - - func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function)); - if (func->pci_dev == NULL) { - dbg("ERROR: pci_dev still null\n"); - return 0; - } + struct pci_dev *dev; + struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate; + int num, fn; + + dev = pci_find_slot(p_slot->bus, PCI_DEVFN(p_slot->device, 0)); + if (dev) { + err("Device %s already exists at %x:%x, cannot hot-add\n", + pci_name(dev), p_slot->bus, p_slot->device); + return -EINVAL; } - if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - pci_read_config_byte(func->pci_dev, PCI_SECONDARY_BUS, &bus); - child = pci_add_new_bus(func->pci_dev->bus, (func->pci_dev), bus); - pci_do_scan_bus(child); + num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0)); + if (num == 0) { + err("No new device found\n"); + return -ENODEV; + } + for (fn = 0; fn < 8; fn++) { + if (!(dev = pci_find_slot(p_slot->bus, + PCI_DEVFN(p_slot->device, fn)))) + continue; + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + err("Cannot hot-add display device %s\n", + pci_name(dev)); + continue; + } + if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) || + (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) { + /* Find an unused bus number for the new bridge */ + struct pci_bus *child; + unsigned char busnr, start = parent->secondary; + unsigned char end = parent->subordinate; + for (busnr = start; busnr <= end; busnr++) { + if (!pci_find_bus(pci_domain_nr(parent), + busnr)) + break; + } + if (busnr >= end) { + err("No free bus for hot-added bridge\n"); + continue; + } + child = pci_add_new_bus(parent, dev, busnr); + if (!child) { + err("Cannot add new bus for %s\n", + pci_name(dev)); + continue; + } + child->subordinate = pci_do_scan_bus(child); + pci_bus_size_bridges(child); + } + /* TBD: program firmware provided _HPP values */ + /* program_fw_provided_values(dev); */ } + pci_bus_assign_resources(parent); + pci_bus_add_devices(parent); + pci_enable_bridges(parent); return 0; } - int shpchp_unconfigure_device(struct pci_func* func) { int rc = 0; @@ -95,44 +118,6 @@ int shpchp_unconfigure_device(struct pci_func* func) return rc; } -/* - * shpchp_set_irq - * - * @bus_num: bus number of PCI device - * @dev_num: device number of PCI device - * @slot: pointer to u8 where slot number will be returned - */ -int shpchp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num) -{ -#if defined(CONFIG_X86) && !defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_64) - int rc; - u16 temp_word; - struct pci_dev fakedev; - struct pci_bus fakebus; - - fakedev.devfn = dev_num << 3; - fakedev.bus = &fakebus; - fakebus.number = bus_num; - dbg("%s: dev %d, bus %d, pin %d, num %d\n", - __FUNCTION__, dev_num, bus_num, int_pin, irq_num); - rc = pcibios_set_irq_routing(&fakedev, int_pin - 0x0a, irq_num); - dbg("%s: rc %d\n", __FUNCTION__, rc); - if (!rc) - return !rc; - - /* set the Edge Level Control Register (ELCR) */ - temp_word = inb(0x4d0); - temp_word |= inb(0x4d1) << 8; - - temp_word |= 0x01 << irq_num; - - /* This should only be for x86 as it sets the Edge Level Control Register */ - outb((u8) (temp_word & 0xFF), 0x4d0); - outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1); -#endif - return 0; -} - /* More PCI configuration routines; this time centered around hotplug controller */ @@ -447,364 +432,3 @@ int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot) return 0; } - -/* - * shpchp_save_used_resources - * - * Stores used resource information for existing boards. this is - * for boards that were in the system when this driver was loaded. - * this function is for hot plug ADD - * - * returns 0 if success - * if disable == 1(DISABLE_CARD), - * it loops for all functions of the slot and disables them. - * else, it just get resources of the function and return. - */ -int shpchp_save_used_resources(struct controller *ctrl, struct pci_func *func, int disable) -{ - u8 cloop; - u8 header_type; - u8 secondary_bus; - u8 temp_byte; - u16 command; - u16 save_command; - u16 w_base, w_length; - u32 temp_register; - u32 save_base; - u32 base, length; - u64 base64 = 0; - int index = 0; - unsigned int devfn; - struct pci_resource *mem_node = NULL; - struct pci_resource *p_mem_node = NULL; - struct pci_resource *t_mem_node; - struct pci_resource *io_node; - struct pci_resource *bus_node; - struct pci_bus lpci_bus, *pci_bus; - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - - if (disable) - func = shpchp_slot_find(func->bus, func->device, index++); - - while ((func != NULL) && func->is_a_board) { - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - /* Save the command register */ - pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command); - - if (disable) { - /* disable card */ - command = 0x00; - pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - } - - /* Check for Bridge */ - pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ - dbg("Save_used_res of PCI bridge b:d=0x%x:%x, sc=0x%x\n", - func->bus, func->device, save_command); - if (disable) { - /* Clear Bridge Control Register */ - command = 0x00; - pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command); - } - - pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); - pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte); - - bus_node = kmalloc(sizeof(struct pci_resource), - GFP_KERNEL); - if (!bus_node) - return -ENOMEM; - - bus_node->base = (ulong)secondary_bus; - bus_node->length = (ulong)(temp_byte - secondary_bus + 1); - - bus_node->next = func->bus_head; - func->bus_head = bus_node; - - /* Save IO base and Limit registers */ - pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &temp_byte); - base = temp_byte; - pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &temp_byte); - length = temp_byte; - - if ((base <= length) && (!disable || (save_command & PCI_COMMAND_IO))) { - io_node = kmalloc(sizeof(struct pci_resource), - GFP_KERNEL); - if (!io_node) - return -ENOMEM; - - io_node->base = (ulong)(base & PCI_IO_RANGE_MASK) << 8; - io_node->length = (ulong)(length - base + 0x10) << 8; - - io_node->next = func->io_head; - func->io_head = io_node; - } - - /* Save memory base and Limit registers */ - pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base); - pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length); - - if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) { - mem_node = kmalloc(sizeof(struct pci_resource), - GFP_KERNEL); - if (!mem_node) - return -ENOMEM; - - mem_node->base = (ulong)w_base << 16; - mem_node->length = (ulong)(w_length - w_base + 0x10) << 16; - - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - /* Save prefetchable memory base and Limit registers */ - pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base); - pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length); - - if ((w_base <= w_length) && (!disable || (save_command & PCI_COMMAND_MEMORY))) { - p_mem_node = kmalloc(sizeof(struct pci_resource), - GFP_KERNEL); - if (!p_mem_node) - return -ENOMEM; - - p_mem_node->base = (ulong)w_base << 16; - p_mem_node->length = (ulong)(w_length - w_base + 0x10) << 16; - - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } - } else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) { - dbg("Save_used_res of PCI adapter b:d=0x%x:%x, sc=0x%x\n", - func->bus, func->device, save_command); - - /* Figure out IO and memory base lengths */ - for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) { - pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base); - - temp_register = 0xFFFFFFFF; - pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register); - pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register); - - if (!disable) - pci_bus_write_config_dword(pci_bus, devfn, cloop, save_base); - - if (!temp_register) - continue; - - base = temp_register; - - if ((base & PCI_BASE_ADDRESS_SPACE_IO) && - (!disable || (save_command & PCI_COMMAND_IO))) { - /* IO base */ - /* set temp_register = amount of IO space requested */ - base = base & 0xFFFFFFFCL; - base = (~base) + 1; - - io_node = kmalloc(sizeof (struct pci_resource), - GFP_KERNEL); - if (!io_node) - return -ENOMEM; - - io_node->base = (ulong)save_base & PCI_BASE_ADDRESS_IO_MASK; - io_node->length = (ulong)base; - dbg("sur adapter: IO bar=0x%x(length=0x%x)\n", - io_node->base, io_node->length); - - io_node->next = func->io_head; - func->io_head = io_node; - } else { /* map Memory */ - int prefetchable = 1; - /* struct pci_resources **res_node; */ - char *res_type_str = "PMEM"; - u32 temp_register2; - - t_mem_node = kmalloc(sizeof (struct pci_resource), - GFP_KERNEL); - if (!t_mem_node) - return -ENOMEM; - - if (!(base & PCI_BASE_ADDRESS_MEM_PREFETCH) && - (!disable || (save_command & PCI_COMMAND_MEMORY))) { - prefetchable = 0; - mem_node = t_mem_node; - res_type_str++; - } else - p_mem_node = t_mem_node; - - base = base & 0xFFFFFFF0L; - base = (~base) + 1; - - switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) { - case PCI_BASE_ADDRESS_MEM_TYPE_32: - if (prefetchable) { - p_mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK; - p_mem_node->length = (ulong)base; - dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n", - res_type_str, - p_mem_node->base, - p_mem_node->length); - - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } else { - mem_node->base = (ulong)save_base & PCI_BASE_ADDRESS_MEM_MASK; - mem_node->length = (ulong)base; - dbg("sur adapter: 32 %s bar=0x%x(length=0x%x)\n", - res_type_str, - mem_node->base, - mem_node->length); - - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - break; - case PCI_BASE_ADDRESS_MEM_TYPE_64: - pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2); - base64 = temp_register2; - base64 = (base64 << 32) | save_base; - - if (temp_register2) { - dbg("sur adapter: 64 %s high dword of base64(0x%x:%x) masked to 0\n", - res_type_str, temp_register2, (u32)base64); - base64 &= 0x00000000FFFFFFFFL; - } - - if (prefetchable) { - p_mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK; - p_mem_node->length = base; - dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n", - res_type_str, - p_mem_node->base, - p_mem_node->length); - - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } else { - mem_node->base = base64 & PCI_BASE_ADDRESS_MEM_MASK; - mem_node->length = base; - dbg("sur adapter: 64 %s base=0x%x(len=0x%x)\n", - res_type_str, - mem_node->base, - mem_node->length); - - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - cloop += 4; - break; - default: - dbg("asur: reserved BAR type=0x%x\n", - temp_register); - break; - } - } - } /* End of base register loop */ - } else { /* Some other unknown header type */ - dbg("Save_used_res of PCI unknown type b:d=0x%x:%x. skip.\n", - func->bus, func->device); - } - - /* find the next device in this slot */ - if (!disable) - break; - func = shpchp_slot_find(func->bus, func->device, index++); - } - - return 0; -} - -/** - * kfree_resource_list: release memory of all list members - * @res: resource list to free - */ -static inline void -return_resource_list(struct pci_resource **func, struct pci_resource **res) -{ - struct pci_resource *node; - struct pci_resource *t_node; - - node = *func; - *func = NULL; - while (node) { - t_node = node->next; - return_resource(res, node); - node = t_node; - } -} - -/* - * shpchp_return_board_resources - * - * this routine returns all resources allocated to a board to - * the available pool. - * - * returns 0 if success - */ -int shpchp_return_board_resources(struct pci_func * func, - struct resource_lists * resources) -{ - int rc; - dbg("%s\n", __FUNCTION__); - - if (!func) - return 1; - - return_resource_list(&(func->io_head),&(resources->io_head)); - return_resource_list(&(func->mem_head),&(resources->mem_head)); - return_resource_list(&(func->p_mem_head),&(resources->p_mem_head)); - return_resource_list(&(func->bus_head),&(resources->bus_head)); - - rc = shpchp_resource_sort_and_combine(&(resources->mem_head)); - rc |= shpchp_resource_sort_and_combine(&(resources->p_mem_head)); - rc |= shpchp_resource_sort_and_combine(&(resources->io_head)); - rc |= shpchp_resource_sort_and_combine(&(resources->bus_head)); - - return rc; -} - -/** - * kfree_resource_list: release memory of all list members - * @res: resource list to free - */ -static inline void -kfree_resource_list(struct pci_resource **r) -{ - struct pci_resource *res, *tres; - - res = *r; - *r = NULL; - - while (res) { - tres = res; - res = res->next; - kfree(tres); - } -} - -/** - * shpchp_destroy_resource_list: put node back in the resource list - * @resources: list to put nodes back - */ -void shpchp_destroy_resource_list(struct resource_lists *resources) -{ - kfree_resource_list(&(resources->io_head)); - kfree_resource_list(&(resources->mem_head)); - kfree_resource_list(&(resources->p_mem_head)); - kfree_resource_list(&(resources->bus_head)); -} - -/** - * shpchp_destroy_board_resources: put node back in the resource list - * @resources: list to put nodes back - */ -void shpchp_destroy_board_resources(struct pci_func * func) -{ - kfree_resource_list(&(func->io_head)); - kfree_resource_list(&(func->mem_head)); - kfree_resource_list(&(func->p_mem_head)); - kfree_resource_list(&(func->bus_head)); -} diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index c9445ebda5c7..b0e781dbcffb 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -40,43 +40,49 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, char *buf) { - struct pci_dev *pci_dev; - struct controller *ctrl; + struct pci_dev *pdev; char * out = buf; - int index; - struct pci_resource *res; + int index, busnr; + struct resource *res; + struct pci_bus *bus; - pci_dev = container_of (dev, struct pci_dev, dev); - ctrl = pci_get_drvdata(pci_dev); + pdev = container_of (dev, struct pci_dev, dev); + bus = pdev->subordinate; out += sprintf(buf, "Free resources: memory\n"); - index = 11; - res = ctrl->mem_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { + res = bus->resource[index]; + if (res && (res->flags & IORESOURCE_MEM) && + !(res->flags & IORESOURCE_PREFETCH)) { + out += sprintf(out, "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "Free resources: prefetchable memory\n"); - index = 11; - res = ctrl->p_mem_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { + res = bus->resource[index]; + if (res && (res->flags & IORESOURCE_MEM) && + (res->flags & IORESOURCE_PREFETCH)) { + out += sprintf(out, "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "Free resources: IO\n"); - index = 11; - res = ctrl->io_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) { + res = bus->resource[index]; + if (res && (res->flags & IORESOURCE_IO)) { + out += sprintf(out, "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "Free resources: bus numbers\n"); - index = 11; - res = ctrl->bus_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (busnr = bus->secondary; busnr <= bus->subordinate; busnr++) { + if (!pci_find_bus(pci_domain_nr(bus), busnr)) + break; } + if (busnr < bus->subordinate) + out += sprintf(out, "start = %8.8x, length = %8.8x\n", + busnr, (bus->subordinate - busnr)); return out - buf; } @@ -84,16 +90,16 @@ static DEVICE_ATTR (ctrl, S_IRUGO, show_ctrl, NULL); static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char *buf) { - struct pci_dev *pci_dev; + struct pci_dev *pdev, *fdev; struct controller *ctrl; char * out = buf; int index; - struct pci_resource *res; + struct resource *res; struct pci_func *new_slot; struct slot *slot; - pci_dev = container_of (dev, struct pci_dev, dev); - ctrl = pci_get_drvdata(pci_dev); + pdev = container_of (dev, struct pci_dev, dev); + ctrl = pci_get_drvdata(pdev); slot=ctrl->slot; @@ -101,34 +107,47 @@ static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char new_slot = shpchp_slot_find(slot->bus, slot->device, 0); if (!new_slot) break; + fdev = new_slot->pci_dev; + if (!fdev) + break; out += sprintf(out, "assigned resources: memory\n"); - index = 11; - res = new_slot->mem_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index=0; index <= PCI_NUM_RESOURCES; index++) { + res = &(fdev->resource[index]); + if (res && (res->flags & IORESOURCE_MEM) && + !(res->flags & IORESOURCE_PREFETCH)) { + out += sprintf(out, + "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "assigned resources: prefetchable memory\n"); - index = 11; - res = new_slot->p_mem_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index=0; index <= PCI_NUM_RESOURCES; index++) { + res = &(fdev->resource[index]); + if (res && (res->flags & (IORESOURCE_MEM | + IORESOURCE_PREFETCH))) { + out += sprintf(out, + "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "assigned resources: IO\n"); - index = 11; - res = new_slot->io_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; + for (index=0; index <= PCI_NUM_RESOURCES; index++) { + res = &(fdev->resource[index]); + if (res && (res->flags & IORESOURCE_IO)) { + out += sprintf(out, + "start = %8.8lx, length = %8.8lx\n", + res->start, (res->end - res->start)); + } } out += sprintf(out, "assigned resources: bus numbers\n"); - index = 11; - res = new_slot->bus_head; - while (res && index--) { - out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length); - res = res->next; - } + if (fdev->subordinate) + out += sprintf(out, "start = %8.8x, length = %8.8x\n", + fdev->subordinate->secondary, + (fdev->subordinate->subordinate - + fdev->subordinate->secondary)); + else + out += sprintf(out, "start = %8.8x, length = %8.8x\n", + fdev->bus->number, 1); slot=slot->next; } diff --git a/drivers/pci/hotplug/shpchprm.h b/drivers/pci/hotplug/shpchprm.h index 057b192ce589..df474b27d6e8 100644 --- a/drivers/pci/hotplug/shpchprm.h +++ b/drivers/pci/hotplug/shpchprm.h @@ -32,24 +32,12 @@ #ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY #include "shpchprm_legacy.h" -#else -#include "shpchprm_nonacpi.h" #endif int shpchprm_init(enum php_ctlr_type ct); void shpchprm_cleanup(void); -int shpchprm_print_pirt(void); -int shpchprm_find_available_resources(struct controller *ctrl); int shpchprm_set_hpp(struct controller *ctrl, struct pci_func *func, u8 card_type); void shpchprm_enable_card(struct controller *ctrl, struct pci_func *func, u8 card_type); int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum); -#ifdef DEBUG -#define RES_CHECK(this, bits) \ - { if (((this) & (bits - 1))) \ - printk("%s:%d ERR: potential res loss!\n", __FUNCTION__, __LINE__); } -#else -#define RES_CHECK(this, bits) -#endif - #endif /* _SHPCHPRM_H_ */ diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index d37b31658edf..3d2f9c5269c7 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -34,9 +34,6 @@ #include #include #include -#ifdef CONFIG_IA64 -#include -#endif #include #include #include @@ -75,10 +72,6 @@ struct acpi_php_slot { int dev; int fun; u32 sun; - struct pci_resource *mem_head; - struct pci_resource *p_mem_head; - struct pci_resource *io_head; - struct pci_resource *bus_head; void *slot_ops; /* _STA, _EJx, etc */ struct slot *slot; }; /* per func */ @@ -95,14 +88,6 @@ struct acpi_bridge { int bus; /* pdev->subordinate->number */ struct acpi__hpp *_hpp; struct acpi_php_slot *slots; - struct pci_resource *tmem_head; /* total from crs */ - struct pci_resource *tp_mem_head; /* total from crs */ - struct pci_resource *tio_head; /* total from crs */ - struct pci_resource *tbus_head; /* total from crs */ - struct pci_resource *mem_head; /* available */ - struct pci_resource *p_mem_head; /* available */ - struct pci_resource *io_head; /* available */ - struct pci_resource *bus_head; /* available */ int scanned; int type; }; @@ -252,485 +237,6 @@ static void acpi_run_oshp ( struct acpi_bridge *ab) return; } -static acpi_status acpi_evaluate_crs( - acpi_handle handle, - struct acpi_resource **retbuf - ) -{ - acpi_status status; - struct acpi_buffer crsbuf; - u8 *path_name = acpi_path_name(handle); - - crsbuf.length = 0; - crsbuf.pointer = NULL; - - status = acpi_get_current_resources (handle, &crsbuf); - - switch (status) { - case AE_BUFFER_OVERFLOW: - break; /* found */ - case AE_NOT_FOUND: - dbg("acpi_shpchprm:%s _CRS not found\n", path_name); - return status; - default: - err ("acpi_shpchprm:%s _CRS fail=0x%x\n", path_name, status); - return status; - } - - crsbuf.pointer = kmalloc (crsbuf.length, GFP_KERNEL); - if (!crsbuf.pointer) { - err ("acpi_shpchprm: alloc %ld bytes for %s _CRS fail\n", (ulong)crsbuf.length, path_name); - return AE_NO_MEMORY; - } - - status = acpi_get_current_resources (handle, &crsbuf); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm: %s _CRS fail=0x%x.\n", path_name, status); - kfree(crsbuf.pointer); - return status; - } - - *retbuf = crsbuf.pointer; - - return status; -} - -static void free_pci_resource ( struct pci_resource *aprh) -{ - struct pci_resource *res, *next; - - for (res = aprh; res; res = next) { - next = res->next; - kfree(res); - } -} - -static void print_pci_resource ( struct pci_resource *aprh) -{ - struct pci_resource *res; - - for (res = aprh; res; res = res->next) - dbg(" base= 0x%x length= 0x%x\n", res->base, res->length); -} - -static void print_slot_resources( struct acpi_php_slot *aps) -{ - if (aps->bus_head) { - dbg(" BUS Resources:\n"); - print_pci_resource (aps->bus_head); - } - - if (aps->io_head) { - dbg(" IO Resources:\n"); - print_pci_resource (aps->io_head); - } - - if (aps->mem_head) { - dbg(" MEM Resources:\n"); - print_pci_resource (aps->mem_head); - } - - if (aps->p_mem_head) { - dbg(" PMEM Resources:\n"); - print_pci_resource (aps->p_mem_head); - } -} - -static void print_pci_resources( struct acpi_bridge *ab) -{ - if (ab->tbus_head) { - dbg(" Total BUS Resources:\n"); - print_pci_resource (ab->tbus_head); - } - if (ab->bus_head) { - dbg(" BUS Resources:\n"); - print_pci_resource (ab->bus_head); - } - - if (ab->tio_head) { - dbg(" Total IO Resources:\n"); - print_pci_resource (ab->tio_head); - } - if (ab->io_head) { - dbg(" IO Resources:\n"); - print_pci_resource (ab->io_head); - } - - if (ab->tmem_head) { - dbg(" Total MEM Resources:\n"); - print_pci_resource (ab->tmem_head); - } - if (ab->mem_head) { - dbg(" MEM Resources:\n"); - print_pci_resource (ab->mem_head); - } - - if (ab->tp_mem_head) { - dbg(" Total PMEM Resources:\n"); - print_pci_resource (ab->tp_mem_head); - } - if (ab->p_mem_head) { - dbg(" PMEM Resources:\n"); - print_pci_resource (ab->p_mem_head); - } - if (ab->_hpp) { - dbg(" _HPP: cache_line_size=0x%x\n", ab->_hpp->cache_line_size); - dbg(" _HPP: latency timer =0x%x\n", ab->_hpp->latency_timer); - dbg(" _HPP: enable SERR =0x%x\n", ab->_hpp->enable_serr); - dbg(" _HPP: enable PERR =0x%x\n", ab->_hpp->enable_perr); - } -} - -static int shpchprm_delete_resource( - struct pci_resource **aprh, - ulong base, - ulong size) -{ - struct pci_resource *res; - struct pci_resource *prevnode; - struct pci_resource *split_node; - ulong tbase; - - shpchp_resource_sort_and_combine(aprh); - - for (res = *aprh; res; res = res->next) { - if (res->base > base) - continue; - - if ((res->base + res->length) < (base + size)) - continue; - - if (res->base < base) { - tbase = base; - - if ((res->length - (tbase - res->base)) < size) - continue; - - split_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!split_node) - return -ENOMEM; - - split_node->base = res->base; - split_node->length = tbase - res->base; - res->base = tbase; - res->length -= split_node->length; - - split_node->next = res->next; - res->next = split_node; - } - - if (res->length >= size) { - split_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!split_node) - return -ENOMEM; - - split_node->base = res->base + size; - split_node->length = res->length - size; - res->length = size; - - split_node->next = res->next; - res->next = split_node; - } - - if (*aprh == res) { - *aprh = res->next; - } else { - prevnode = *aprh; - while (prevnode->next != res) - prevnode = prevnode->next; - - prevnode->next = res->next; - } - res->next = NULL; - kfree(res); - break; - } - - return 0; -} - -static int shpchprm_delete_resources( - struct pci_resource **aprh, - struct pci_resource *this - ) -{ - struct pci_resource *res; - - for (res = this; res; res = res->next) - shpchprm_delete_resource(aprh, res->base, res->length); - - return 0; -} - -static int shpchprm_add_resource( - struct pci_resource **aprh, - ulong base, - ulong size) -{ - struct pci_resource *res; - - for (res = *aprh; res; res = res->next) { - if ((res->base + res->length) == base) { - res->length += size; - size = 0L; - break; - } - if (res->next == *aprh) - break; - } - - if (size) { - res = kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!res) { - err ("acpi_shpchprm: alloc for res fail\n"); - return -ENOMEM; - } - memset(res, 0, sizeof (struct pci_resource)); - - res->base = base; - res->length = size; - res->next = *aprh; - *aprh = res; - } - - return 0; -} - -static int shpchprm_add_resources( - struct pci_resource **aprh, - struct pci_resource *this - ) -{ - struct pci_resource *res; - int rc = 0; - - for (res = this; res && !rc; res = res->next) - rc = shpchprm_add_resource(aprh, res->base, res->length); - - return rc; -} - -static void acpi_parse_io ( - struct acpi_bridge *ab, - union acpi_resource_data *data - ) -{ - struct acpi_resource_io *dataio; - dataio = (struct acpi_resource_io *) data; - - dbg("Io Resource\n"); - dbg(" %d bit decode\n", ACPI_DECODE_16 == dataio->io_decode ? 16:10); - dbg(" Range minimum base: %08X\n", dataio->min_base_address); - dbg(" Range maximum base: %08X\n", dataio->max_base_address); - dbg(" Alignment: %08X\n", dataio->alignment); - dbg(" Range Length: %08X\n", dataio->range_length); -} - -static void acpi_parse_fixed_io ( - struct acpi_bridge *ab, - union acpi_resource_data *data - ) -{ - struct acpi_resource_fixed_io *datafio; - datafio = (struct acpi_resource_fixed_io *) data; - - dbg("Fixed Io Resource\n"); - dbg(" Range base address: %08X", datafio->base_address); - dbg(" Range length: %08X", datafio->range_length); -} - -static void acpi_parse_address16_32 ( - struct acpi_bridge *ab, - union acpi_resource_data *data, - acpi_resource_type id - ) -{ - /* - * acpi_resource_address16 == acpi_resource_address32 - * acpi_resource_address16 *data16 = (acpi_resource_address16 *) data; - */ - struct acpi_resource_address32 *data32 = (struct acpi_resource_address32 *) data; - struct pci_resource **aprh, **tprh; - - if (id == ACPI_RSTYPE_ADDRESS16) - dbg("acpi_shpchprm:16-Bit Address Space Resource\n"); - else - dbg("acpi_shpchprm:32-Bit Address Space Resource\n"); - - switch (data32->resource_type) { - case ACPI_MEMORY_RANGE: - dbg(" Resource Type: Memory Range\n"); - aprh = &ab->mem_head; - tprh = &ab->tmem_head; - - switch (data32->attribute.memory.cache_attribute) { - case ACPI_NON_CACHEABLE_MEMORY: - dbg(" Type Specific: Noncacheable memory\n"); - break; - case ACPI_CACHABLE_MEMORY: - dbg(" Type Specific: Cacheable memory\n"); - break; - case ACPI_WRITE_COMBINING_MEMORY: - dbg(" Type Specific: Write-combining memory\n"); - break; - case ACPI_PREFETCHABLE_MEMORY: - aprh = &ab->p_mem_head; - dbg(" Type Specific: Prefetchable memory\n"); - break; - default: - dbg(" Type Specific: Invalid cache attribute\n"); - break; - } - - dbg(" Type Specific: Read%s\n", ACPI_READ_WRITE_MEMORY == data32->attribute.memory.read_write_attribute ? "/Write":" Only"); - break; - - case ACPI_IO_RANGE: - dbg(" Resource Type: I/O Range\n"); - aprh = &ab->io_head; - tprh = &ab->tio_head; - - switch (data32->attribute.io.range_attribute) { - case ACPI_NON_ISA_ONLY_RANGES: - dbg(" Type Specific: Non-ISA Io Addresses\n"); - break; - case ACPI_ISA_ONLY_RANGES: - dbg(" Type Specific: ISA Io Addresses\n"); - break; - case ACPI_ENTIRE_RANGE: - dbg(" Type Specific: ISA and non-ISA Io Addresses\n"); - break; - default: - dbg(" Type Specific: Invalid range attribute\n"); - break; - } - break; - - case ACPI_BUS_NUMBER_RANGE: - dbg(" Resource Type: Bus Number Range(fixed)\n"); - /* fixup to be compatible with the rest of php driver */ - data32->min_address_range++; - data32->address_length--; - aprh = &ab->bus_head; - tprh = &ab->tbus_head; - break; - default: - dbg(" Resource Type: Invalid resource type. Exiting.\n"); - return; - } - - dbg(" Resource %s\n", ACPI_CONSUMER == data32->producer_consumer ? "Consumer":"Producer"); - dbg(" %s decode\n", ACPI_SUB_DECODE == data32->decode ? "Subtractive":"Positive"); - dbg(" Min address is %s fixed\n", ACPI_ADDRESS_FIXED == data32->min_address_fixed ? "":"not"); - dbg(" Max address is %s fixed\n", ACPI_ADDRESS_FIXED == data32->max_address_fixed ? "":"not"); - dbg(" Granularity: %08X\n", data32->granularity); - dbg(" Address range min: %08X\n", data32->min_address_range); - dbg(" Address range max: %08X\n", data32->max_address_range); - dbg(" Address translation offset: %08X\n", data32->address_translation_offset); - dbg(" Address Length: %08X\n", data32->address_length); - - if (0xFF != data32->resource_source.index) { - dbg(" Resource Source Index: %X\n", data32->resource_source.index); - /* dbg(" Resource Source: %s\n", data32->resource_source.string_ptr); */ - } - - shpchprm_add_resource(aprh, data32->min_address_range, data32->address_length); -} - -static acpi_status acpi_parse_crs( - struct acpi_bridge *ab, - struct acpi_resource *crsbuf - ) -{ - acpi_status status = AE_OK; - struct acpi_resource *resource = crsbuf; - u8 count = 0; - u8 done = 0; - - while (!done) { - dbg("acpi_shpchprm: PCI bus 0x%x Resource structure %x.\n", ab->bus, count++); - switch (resource->id) { - case ACPI_RSTYPE_IRQ: - dbg("Irq -------- Resource\n"); - break; - case ACPI_RSTYPE_DMA: - dbg("DMA -------- Resource\n"); - break; - case ACPI_RSTYPE_START_DPF: - dbg("Start DPF -------- Resource\n"); - break; - case ACPI_RSTYPE_END_DPF: - dbg("End DPF -------- Resource\n"); - break; - case ACPI_RSTYPE_IO: - acpi_parse_io (ab, &resource->data); - break; - case ACPI_RSTYPE_FIXED_IO: - acpi_parse_fixed_io (ab, &resource->data); - break; - case ACPI_RSTYPE_VENDOR: - dbg("Vendor -------- Resource\n"); - break; - case ACPI_RSTYPE_END_TAG: - dbg("End_tag -------- Resource\n"); - done = 1; - break; - case ACPI_RSTYPE_MEM24: - dbg("Mem24 -------- Resource\n"); - break; - case ACPI_RSTYPE_MEM32: - dbg("Mem32 -------- Resource\n"); - break; - case ACPI_RSTYPE_FIXED_MEM32: - dbg("Fixed Mem32 -------- Resource\n"); - break; - case ACPI_RSTYPE_ADDRESS16: - acpi_parse_address16_32(ab, &resource->data, ACPI_RSTYPE_ADDRESS16); - break; - case ACPI_RSTYPE_ADDRESS32: - acpi_parse_address16_32(ab, &resource->data, ACPI_RSTYPE_ADDRESS32); - break; - case ACPI_RSTYPE_ADDRESS64: - info("Address64 -------- Resource unparsed\n"); - break; - case ACPI_RSTYPE_EXT_IRQ: - dbg("Ext Irq -------- Resource\n"); - break; - default: - dbg("Invalid -------- resource type 0x%x\n", resource->id); - break; - } - - resource = (struct acpi_resource *) ((char *)resource + resource->length); - } - - return status; -} - -static acpi_status acpi_get_crs( struct acpi_bridge *ab) -{ - acpi_status status; - struct acpi_resource *crsbuf; - - status = acpi_evaluate_crs(ab->handle, &crsbuf); - if (ACPI_SUCCESS(status)) { - status = acpi_parse_crs(ab, crsbuf); - kfree(crsbuf); - - shpchp_resource_sort_and_combine(&ab->bus_head); - shpchp_resource_sort_and_combine(&ab->io_head); - shpchp_resource_sort_and_combine(&ab->mem_head); - shpchp_resource_sort_and_combine(&ab->p_mem_head); - - shpchprm_add_resources (&ab->tbus_head, ab->bus_head); - shpchprm_add_resources (&ab->tio_head, ab->io_head); - shpchprm_add_resources (&ab->tmem_head, ab->mem_head); - shpchprm_add_resources (&ab->tp_mem_head, ab->p_mem_head); - } - - return status; -} - /* find acpi_bridge downword from ab. */ static struct acpi_bridge * find_acpi_bridge_by_bus( @@ -1047,13 +553,6 @@ static struct acpi_bridge * add_host_bridge( ab->scanned = 0; ab->type = BRIDGE_TYPE_HOST; - /* get root pci bridge's current resources */ - status = acpi_get_crs(ab); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s evaluate _CRS fail=0x%x\n", path_name, status); - kfree(ab); - return NULL; - } build_a_bridge(ab, ab); return ab; @@ -1147,11 +646,6 @@ static void free_a_slot(struct acpi_php_slot *aps) { dbg(" free a php func of slot(0x%02x) on PCI b:d:f=0x%02x:%02x:%02x\n", aps->sun, aps->bus, aps->dev, aps->fun); - free_pci_resource (aps->io_head); - free_pci_resource (aps->bus_head); - free_pci_resource (aps->mem_head); - free_pci_resource (aps->p_mem_head); - kfree(aps); } @@ -1176,15 +670,6 @@ static void free_a_bridge( struct acpi_bridge *ab) free_a_slot(aps); } - free_pci_resource (ab->io_head); - free_pci_resource (ab->tio_head); - free_pci_resource (ab->bus_head); - free_pci_resource (ab->tbus_head); - free_pci_resource (ab->mem_head); - free_pci_resource (ab->tmem_head); - free_pci_resource (ab->p_mem_head); - free_pci_resource (ab->tp_mem_head); - kfree(ab); } @@ -1234,47 +719,6 @@ static int get_number_of_slots ( return slot_num; } -static int print_acpi_resources (struct acpi_bridge *ab) -{ - struct acpi_php_slot *aps; - int i; - - switch (ab->type) { - case BRIDGE_TYPE_HOST: - dbg("PCI HOST Bridge (%x) [%s]\n", ab->bus, acpi_path_name(ab->handle)); - break; - case BRIDGE_TYPE_P2P: - dbg("PCI P2P Bridge (%x-%x) [%s]\n", ab->pbus, ab->bus, acpi_path_name(ab->handle)); - break; - }; - - print_pci_resources (ab); - - for ( i = -1, aps = ab->slots; aps; aps = aps->next) { - if (aps->dev == i) - continue; - dbg(" Slot sun(%x) s:b:d:f(%02x:%02x:%02x:%02x)\n", aps->sun, aps->seg, aps->bus, aps->dev, aps->fun); - print_slot_resources(aps); - i = aps->dev; - } - - if (ab->child) - print_acpi_resources (ab->child); - - if (ab->next) - print_acpi_resources (ab->next); - - return 0; -} - -int shpchprm_print_pirt(void) -{ - dbg("SHPCHPRM ACPI Slots\n"); - if (acpi_bridges_head) - print_acpi_resources (acpi_bridges_head); - return 0; -} - static struct acpi_php_slot * get_acpi_slot ( struct acpi_bridge *ab, u32 sun @@ -1302,265 +746,6 @@ static struct acpi_php_slot * get_acpi_slot ( } -#if 0 -static void * shpchprm_get_slot(struct slot *slot) -{ - struct acpi_bridge *ab = acpi_bridges_head; - struct acpi_php_slot *aps = get_acpi_slot (ab, slot->number); - - aps->slot = slot; - - dbg("Got acpi slot sun(%x): s:b:d:f(%x:%x:%x:%x)\n", aps->sun, aps->seg, aps->bus, aps->dev, aps->fun); - - return (void *)aps; -} -#endif - -static void shpchprm_dump_func_res( struct pci_func *fun) -{ - struct pci_func *func = fun; - - if (func->bus_head) { - dbg(": BUS Resources:\n"); - print_pci_resource (func->bus_head); - } - if (func->io_head) { - dbg(": IO Resources:\n"); - print_pci_resource (func->io_head); - } - if (func->mem_head) { - dbg(": MEM Resources:\n"); - print_pci_resource (func->mem_head); - } - if (func->p_mem_head) { - dbg(": PMEM Resources:\n"); - print_pci_resource (func->p_mem_head); - } -} - -static void shpchprm_dump_ctrl_res( struct controller *ctlr) -{ - struct controller *ctrl = ctlr; - - if (ctrl->bus_head) { - dbg(": BUS Resources:\n"); - print_pci_resource (ctrl->bus_head); - } - if (ctrl->io_head) { - dbg(": IO Resources:\n"); - print_pci_resource (ctrl->io_head); - } - if (ctrl->mem_head) { - dbg(": MEM Resources:\n"); - print_pci_resource (ctrl->mem_head); - } - if (ctrl->p_mem_head) { - dbg(": PMEM Resources:\n"); - print_pci_resource (ctrl->p_mem_head); - } -} - -static int shpchprm_get_used_resources ( - struct controller *ctrl, - struct pci_func *func - ) -{ - return shpchp_save_used_resources (ctrl, func, !DISABLE_CARD); -} - -static int configure_existing_function( - struct controller *ctrl, - struct pci_func *func - ) -{ - int rc; - - /* see how much resources the func has used. */ - rc = shpchprm_get_used_resources (ctrl, func); - - if (!rc) { - /* subtract the resources used by the func from ctrl resources */ - rc = shpchprm_delete_resources (&ctrl->bus_head, func->bus_head); - rc |= shpchprm_delete_resources (&ctrl->io_head, func->io_head); - rc |= shpchprm_delete_resources (&ctrl->mem_head, func->mem_head); - rc |= shpchprm_delete_resources (&ctrl->p_mem_head, func->p_mem_head); - if (rc) - warn("aCEF: cannot del used resources\n"); - } else - err("aCEF: cannot get used resources\n"); - - return rc; -} - -static int bind_pci_resources_to_slots ( struct controller *ctrl) -{ - struct pci_func *func, new_func; - int busn = ctrl->slot_bus; - int devn, funn; - u32 vid; - - for (devn = 0; devn < 32; devn++) { - for (funn = 0; funn < 8; funn++) { - /* - if (devn == ctrl->device && funn == ctrl->function) - continue; - */ - /* find out if this entry is for an occupied slot */ - vid = 0xFFFFFFFF; - pci_bus_read_config_dword(ctrl->pci_dev->subordinate, PCI_DEVFN(devn, funn), PCI_VENDOR_ID, &vid); - - if (vid != 0xFFFFFFFF) { - func = shpchp_slot_find(busn, devn, funn); - if (!func) { - memset(&new_func, 0, sizeof(struct pci_func)); - new_func.bus = busn; - new_func.device = devn; - new_func.function = funn; - new_func.is_a_board = 1; - configure_existing_function(ctrl, &new_func); - shpchprm_dump_func_res(&new_func); - } else { - configure_existing_function(ctrl, func); - shpchprm_dump_func_res(func); - } - dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus); - } - } - } - - return 0; -} - -static int bind_pci_resources( - struct controller *ctrl, - struct acpi_bridge *ab - ) -{ - int status = 0; - - if (ab->bus_head) { - dbg("bapr: BUS Resources add on PCI 0x%x\n", ab->bus); - status = shpchprm_add_resources (&ctrl->bus_head, ab->bus_head); - if (shpchprm_delete_resources (&ab->bus_head, ctrl->bus_head)) - warn("bapr: cannot sub BUS Resource on PCI 0x%x\n", ab->bus); - if (status) { - err("bapr: BUS Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status); - return status; - } - } else - info("bapr: No BUS Resource on PCI 0x%x.\n", ab->bus); - - if (ab->io_head) { - dbg("bapr: IO Resources add on PCI 0x%x\n", ab->bus); - status = shpchprm_add_resources (&ctrl->io_head, ab->io_head); - if (shpchprm_delete_resources (&ab->io_head, ctrl->io_head)) - warn("bapr: cannot sub IO Resource on PCI 0x%x\n", ab->bus); - if (status) { - err("bapr: IO Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status); - return status; - } - } else - info("bapr: No IO Resource on PCI 0x%x.\n", ab->bus); - - if (ab->mem_head) { - dbg("bapr: MEM Resources add on PCI 0x%x\n", ab->bus); - status = shpchprm_add_resources (&ctrl->mem_head, ab->mem_head); - if (shpchprm_delete_resources (&ab->mem_head, ctrl->mem_head)) - warn("bapr: cannot sub MEM Resource on PCI 0x%x\n", ab->bus); - if (status) { - err("bapr: MEM Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status); - return status; - } - } else - info("bapr: No MEM Resource on PCI 0x%x.\n", ab->bus); - - if (ab->p_mem_head) { - dbg("bapr: PMEM Resources add on PCI 0x%x\n", ab->bus); - status = shpchprm_add_resources (&ctrl->p_mem_head, ab->p_mem_head); - if (shpchprm_delete_resources (&ab->p_mem_head, ctrl->p_mem_head)) - warn("bapr: cannot sub PMEM Resource on PCI 0x%x\n", ab->bus); - if (status) { - err("bapr: PMEM Resource add on PCI 0x%x: fail=0x%x\n", ab->bus, status); - return status; - } - } else - info("bapr: No PMEM Resource on PCI 0x%x.\n", ab->bus); - - return status; -} - -static int no_pci_resources( struct acpi_bridge *ab) -{ - return !(ab->p_mem_head || ab->mem_head || ab->io_head || ab->bus_head); -} - -static int find_pci_bridge_resources ( - struct controller *ctrl, - struct acpi_bridge *ab - ) -{ - int rc = 0; - struct pci_func func; - - memset(&func, 0, sizeof(struct pci_func)); - - func.bus = ab->pbus; - func.device = ab->pdevice; - func.function = ab->pfunction; - func.is_a_board = 1; - - /* Get used resources for this PCI bridge */ - rc = shpchp_save_used_resources (ctrl, &func, !DISABLE_CARD); - - ab->io_head = func.io_head; - ab->mem_head = func.mem_head; - ab->p_mem_head = func.p_mem_head; - ab->bus_head = func.bus_head; - if (ab->bus_head) - shpchprm_delete_resource(&ab->bus_head, ctrl->bus, 1); - - return rc; -} - -static int get_pci_resources_from_bridge( - struct controller *ctrl, - struct acpi_bridge *ab - ) -{ - int rc = 0; - - dbg("grfb: Get Resources for PCI 0x%x from actual PCI bridge 0x%x.\n", ctrl->bus, ab->bus); - - rc = find_pci_bridge_resources (ctrl, ab); - - shpchp_resource_sort_and_combine(&ab->bus_head); - shpchp_resource_sort_and_combine(&ab->io_head); - shpchp_resource_sort_and_combine(&ab->mem_head); - shpchp_resource_sort_and_combine(&ab->p_mem_head); - - shpchprm_add_resources (&ab->tbus_head, ab->bus_head); - shpchprm_add_resources (&ab->tio_head, ab->io_head); - shpchprm_add_resources (&ab->tmem_head, ab->mem_head); - shpchprm_add_resources (&ab->tp_mem_head, ab->p_mem_head); - - return rc; -} - -static int get_pci_resources( - struct controller *ctrl, - struct acpi_bridge *ab - ) -{ - int rc = 0; - - if (no_pci_resources(ab)) { - dbg("spbr:PCI 0x%x has no resources. Get parent resources.\n", ab->bus); - rc = get_pci_resources_from_bridge(ctrl, ab); - } - - return rc; -} - int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { int offset = devnum - ctrl->slot_device_offset; @@ -1570,42 +755,6 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -/* - * Get resources for this ctrl. - * 1. get total resources from ACPI _CRS or bridge (this ctrl) - * 2. find used resources of existing adapters - * 3. subtract used resources from total resources - */ -int shpchprm_find_available_resources( struct controller *ctrl) -{ - int rc = 0; - struct acpi_bridge *ab; - - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->pci_dev->subordinate->number); - if (!ab) { - err("pfar:cannot locate acpi bridge of PCI 0x%x.\n", ctrl->pci_dev->subordinate->number); - return -1; - } - if (no_pci_resources(ab)) { - rc = get_pci_resources(ctrl, ab); - if (rc) { - err("pfar:cannot get pci resources of PCI 0x%x.\n",ctrl->pci_dev->subordinate->number); - return -1; - } - } - - rc = bind_pci_resources(ctrl, ab); - dbg("pfar:pre-Bind PCI 0x%x Ctrl Resource Dump\n", ctrl->pci_dev->subordinate->number); - shpchprm_dump_ctrl_res(ctrl); - - bind_pci_resources_to_slots (ctrl); - - dbg("pfar:post-Bind PCI 0x%x Ctrl Resource Dump\n", ctrl->pci_dev->subordinate->number); - shpchprm_dump_ctrl_res(ctrl); - - return rc; -} - int shpchprm_set_hpp( struct controller *ctrl, struct pci_func *func, diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c index ba6c549c9b9d..6c27debe9522 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.c +++ b/drivers/pci/hotplug/shpchprm_legacy.c @@ -34,25 +34,11 @@ #include #include #include -#ifdef CONFIG_IA64 -#include -#endif #include "shpchp.h" #include "shpchprm.h" -#include "shpchprm_legacy.h" - -static void __iomem *shpchp_rom_start; -static u16 unused_IRQ; void shpchprm_cleanup(void) { - if (shpchp_rom_start) - iounmap(shpchp_rom_start); -} - -int shpchprm_print_pirt(void) -{ - return 0; } int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) @@ -63,280 +49,6 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -/* Find the Hot Plug Resource Table in the specified region of memory */ -static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iomem *end) -{ - void __iomem *fp; - void __iomem *endp; - u8 temp1, temp2, temp3, temp4; - int status = 0; - - endp = (end - sizeof(struct hrt) + 1); - - for (fp = begin; fp <= endp; fp += 16) { - temp1 = readb(fp + SIG0); - temp2 = readb(fp + SIG1); - temp3 = readb(fp + SIG2); - temp4 = readb(fp + SIG3); - if (temp1 == '$' && temp2 == 'H' && temp3 == 'R' && temp4 == 'T') { - status = 1; - break; - } - } - - if (!status) - fp = NULL; - - dbg("Discovered Hotplug Resource Table at %p\n", fp); - return fp; -} - -/* - * shpchprm_find_available_resources - * - * Finds available memory, IO, and IRQ resources for programming - * devices which may be added to the system - * this function is for hot plug ADD! - * - * returns 0 if success - */ -int shpchprm_find_available_resources(struct controller *ctrl) -{ - u8 populated_slot; - u8 bridged_slot; - void __iomem *one_slot; - struct pci_func *func = NULL; - int i = 10, index = 0; - u32 temp_dword, rc; - ulong temp_ulong; - struct pci_resource *mem_node; - struct pci_resource *p_mem_node; - struct pci_resource *io_node; - struct pci_resource *bus_node; - void __iomem *rom_resource_table; - struct pci_bus lpci_bus, *pci_bus; - u8 cfgspc_irq, temp; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - rom_resource_table = detect_HRT_floating_pointer(shpchp_rom_start, shpchp_rom_start + 0xffff); - dbg("rom_resource_table = %p\n", rom_resource_table); - if (rom_resource_table == NULL) - return -ENODEV; - - /* Sum all resources and setup resource maps */ - unused_IRQ = readl(rom_resource_table + UNUSED_IRQ); - dbg("unused_IRQ = %x\n", unused_IRQ); - - temp = 0; - while (unused_IRQ) { - if (unused_IRQ & 1) { - shpchp_disk_irq = temp; - break; - } - unused_IRQ = unused_IRQ >> 1; - temp++; - } - - dbg("shpchp_disk_irq= %d\n", shpchp_disk_irq); - unused_IRQ = unused_IRQ >> 1; - temp++; - - while (unused_IRQ) { - if (unused_IRQ & 1) { - shpchp_nic_irq = temp; - break; - } - unused_IRQ = unused_IRQ >> 1; - temp++; - } - - dbg("shpchp_nic_irq= %d\n", shpchp_nic_irq); - unused_IRQ = readl(rom_resource_table + PCIIRQ); - - temp = 0; - - pci_read_config_byte(ctrl->pci_dev, PCI_INTERRUPT_LINE, &cfgspc_irq); - - if (!shpchp_nic_irq) { - shpchp_nic_irq = cfgspc_irq; - } - - if (!shpchp_disk_irq) { - shpchp_disk_irq = cfgspc_irq; - } - - dbg("shpchp_disk_irq, shpchp_nic_irq= %d, %d\n", shpchp_disk_irq, shpchp_nic_irq); - - one_slot = rom_resource_table + sizeof(struct hrt); - - i = readb(rom_resource_table + NUMBER_OF_ENTRIES); - dbg("number_of_entries = %d\n", i); - - if (!readb(one_slot + SECONDARY_BUS)) - return (1); - - dbg("dev|IO base|length|MEMbase|length|PM base|length|PB SB MB\n"); - - while (i && readb(one_slot + SECONDARY_BUS)) { - u8 dev_func = readb(one_slot + DEV_FUNC); - u8 primary_bus = readb(one_slot + PRIMARY_BUS); - u8 secondary_bus = readb(one_slot + SECONDARY_BUS); - u8 max_bus = readb(one_slot + MAX_BUS); - u16 io_base = readw(one_slot + IO_BASE); - u16 io_length = readw(one_slot + IO_LENGTH); - u16 mem_base = readw(one_slot + MEM_BASE); - u16 mem_length = readw(one_slot + MEM_LENGTH); - u16 pre_mem_base = readw(one_slot + PRE_MEM_BASE); - u16 pre_mem_length = readw(one_slot + PRE_MEM_LENGTH); - - dbg("%2.2x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x |%2.2x %2.2x %2.2x\n", - dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length, - primary_bus, secondary_bus, max_bus); - - /* If this entry isn't for our controller's bus, ignore it */ - if (primary_bus != ctrl->slot_bus) { - i--; - one_slot += sizeof(struct slot_rt); - continue; - } - /* find out if this entry is for an occupied slot */ - temp_dword = 0xFFFFFFFF; - pci_bus->number = primary_bus; - pci_bus_read_config_dword(pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword); - - dbg("temp_D_word = %x\n", temp_dword); - - if (temp_dword != 0xFFFFFFFF) { - index = 0; - func = shpchp_slot_find(primary_bus, dev_func >> 3, 0); - - while (func && (func->function != (dev_func & 0x07))) { - dbg("func = %p b:d:f(%x:%x:%x)\n", func, primary_bus, dev_func >> 3, index); - func = shpchp_slot_find(primary_bus, dev_func >> 3, index++); - } - - /* If we can't find a match, skip this table entry */ - if (!func) { - i--; - one_slot += sizeof(struct slot_rt); - continue; - } - /* this may not work and shouldn't be used */ - if (secondary_bus != primary_bus) - bridged_slot = 1; - else - bridged_slot = 0; - - populated_slot = 1; - } else { - populated_slot = 0; - bridged_slot = 0; - } - dbg("slot populated =%s \n", populated_slot?"yes":"no"); - - /* If we've got a valid IO base, use it */ - - temp_ulong = io_base + io_length; - - if ((io_base) && (temp_ulong <= 0x10000)) { - io_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!io_node) - return -ENOMEM; - - io_node->base = (ulong)io_base; - io_node->length = (ulong)io_length; - dbg("found io_node(base, length) = %x, %x\n", io_node->base, io_node->length); - - if (!populated_slot) { - io_node->next = ctrl->io_head; - ctrl->io_head = io_node; - } else { - io_node->next = func->io_head; - func->io_head = io_node; - } - } - - /* If we've got a valid memory base, use it */ - temp_ulong = mem_base + mem_length; - if ((mem_base) && (temp_ulong <= 0x10000)) { - mem_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!mem_node) - return -ENOMEM; - - mem_node->base = (ulong)mem_base << 16; - mem_node->length = (ulong)(mem_length << 16); - dbg("found mem_node(base, length) = %x, %x\n", mem_node->base, mem_node->length); - - if (!populated_slot) { - mem_node->next = ctrl->mem_head; - ctrl->mem_head = mem_node; - } else { - mem_node->next = func->mem_head; - func->mem_head = mem_node; - } - } - - /* - * If we've got a valid prefetchable memory base, and - * the base + length isn't greater than 0xFFFF - */ - temp_ulong = pre_mem_base + pre_mem_length; - if ((pre_mem_base) && (temp_ulong <= 0x10000)) { - p_mem_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!p_mem_node) - return -ENOMEM; - - p_mem_node->base = (ulong)pre_mem_base << 16; - p_mem_node->length = (ulong)pre_mem_length << 16; - dbg("found p_mem_node(base, length) = %x, %x\n", p_mem_node->base, p_mem_node->length); - - if (!populated_slot) { - p_mem_node->next = ctrl->p_mem_head; - ctrl->p_mem_head = p_mem_node; - } else { - p_mem_node->next = func->p_mem_head; - func->p_mem_head = p_mem_node; - } - } - - /* - * If we've got a valid bus number, use it - * The second condition is to ignore bus numbers on - * populated slots that don't have PCI-PCI bridges - */ - if (secondary_bus && (secondary_bus != primary_bus)) { - bus_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!bus_node) - return -ENOMEM; - - bus_node->base = (ulong)secondary_bus; - bus_node->length = (ulong)(max_bus - secondary_bus + 1); - dbg("found bus_node(base, length) = %x, %x\n", bus_node->base, bus_node->length); - - if (!populated_slot) { - bus_node->next = ctrl->bus_head; - ctrl->bus_head = bus_node; - } else { - bus_node->next = func->bus_head; - func->bus_head = bus_node; - } - } - - i--; - one_slot += sizeof(struct slot_rt); - } - - /* If all of the following fail, we don't have any resources for hot plug add */ - rc = 1; - rc &= shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->io_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - - return (rc); -} - int shpchprm_set_hpp( struct controller *ctrl, struct pci_func *func, @@ -413,12 +125,6 @@ void shpchprm_enable_card( static int legacy_shpchprm_init_pci(void) { - shpchp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN); - if (!shpchp_rom_start) { - err("Could not ioremap memory region for ROM\n"); - return -EIO; - } - return 0; } diff --git a/drivers/pci/hotplug/shpchprm_legacy.h b/drivers/pci/hotplug/shpchprm_legacy.h deleted file mode 100644 index 21bda74ddfa5..000000000000 --- a/drivers/pci/hotplug/shpchprm_legacy.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * SHPCHPRM Legacy: PHP Resource Manager for Non-ACPI/Legacy platform using HRT - * - * Copyright (C) 1995,2001 Compaq Computer Corporation - * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2001 IBM Corp. - * Copyright (C) 2003-2004 Intel Corporation - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to , - * - */ - -#ifndef _SHPCHPRM_LEGACY_H_ -#define _SHPCHPRM_LEGACY_H_ - -#define ROM_PHY_ADDR 0x0F0000 -#define ROM_PHY_LEN 0x00FFFF - -struct slot_rt { - u8 dev_func; - u8 primary_bus; - u8 secondary_bus; - u8 max_bus; - u16 io_base; - u16 io_length; - u16 mem_base; - u16 mem_length; - u16 pre_mem_base; - u16 pre_mem_length; -} __attribute__ ((packed)); - -/* offsets to the hotplug slot resource table registers based on the above structure layout */ -enum slot_rt_offsets { - DEV_FUNC = offsetof(struct slot_rt, dev_func), - PRIMARY_BUS = offsetof(struct slot_rt, primary_bus), - SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus), - MAX_BUS = offsetof(struct slot_rt, max_bus), - IO_BASE = offsetof(struct slot_rt, io_base), - IO_LENGTH = offsetof(struct slot_rt, io_length), - MEM_BASE = offsetof(struct slot_rt, mem_base), - MEM_LENGTH = offsetof(struct slot_rt, mem_length), - PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base), - PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length), -}; - -struct hrt { - char sig0; - char sig1; - char sig2; - char sig3; - u16 unused_IRQ; - u16 PCIIRQ; - u8 number_of_entries; - u8 revision; - u16 reserved1; - u32 reserved2; -} __attribute__ ((packed)); - -/* offsets to the hotplug resource table registers based on the above structure layout */ -enum hrt_offsets { - SIG0 = offsetof(struct hrt, sig0), - SIG1 = offsetof(struct hrt, sig1), - SIG2 = offsetof(struct hrt, sig2), - SIG3 = offsetof(struct hrt, sig3), - UNUSED_IRQ = offsetof(struct hrt, unused_IRQ), - PCIIRQ = offsetof(struct hrt, PCIIRQ), - NUMBER_OF_ENTRIES = offsetof(struct hrt, number_of_entries), - REVISION = offsetof(struct hrt, revision), - HRT_RESERVED1 = offsetof(struct hrt, reserved1), - HRT_RESERVED2 = offsetof(struct hrt, reserved2), -}; - -struct irq_info { - u8 bus, devfn; /* bus, device and function */ - struct { - u8 link; /* IRQ line ID, chipset dependent, 0=not routed */ - u16 bitmap; /* Available IRQs */ - } __attribute__ ((packed)) irq[4]; - u8 slot; /* slot number, 0=onboard */ - u8 rfu; -} __attribute__ ((packed)); - -struct irq_routing_table { - u32 signature; /* PIRQ_SIGNATURE should be here */ - u16 version; /* PIRQ_VERSION */ - u16 size; /* Table size in bytes */ - u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ - u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ - u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */ - u32 miniport_data; /* Crap */ - u8 rfu[11]; - u8 checksum; /* Modulo 256 checksum must give zero */ - struct irq_info slots[0]; -} __attribute__ ((packed)); - -#endif /* _SHPCHPRM_LEGACY_H_ */ diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c index 5f75ef7f3df2..9d4ccae5f78e 100644 --- a/drivers/pci/hotplug/shpchprm_nonacpi.c +++ b/drivers/pci/hotplug/shpchprm_nonacpi.c @@ -34,23 +34,14 @@ #include #include #include -#ifdef CONFIG_IA64 -#include -#endif #include "shpchp.h" #include "shpchprm.h" -#include "shpchprm_nonacpi.h" void shpchprm_cleanup(void) { return; } -int shpchprm_print_pirt(void) -{ - return 0; -} - int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { int offset = devnum - ctrl->slot_device_offset; @@ -60,275 +51,6 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -static void print_pci_resource ( struct pci_resource *aprh) -{ - struct pci_resource *res; - - for (res = aprh; res; res = res->next) - dbg(" base= 0x%x length= 0x%x\n", res->base, res->length); -} - - -static void phprm_dump_func_res( struct pci_func *fun) -{ - struct pci_func *func = fun; - - if (func->bus_head) { - dbg(": BUS Resources:\n"); - print_pci_resource (func->bus_head); - } - if (func->io_head) { - dbg(": IO Resources:\n"); - print_pci_resource (func->io_head); - } - if (func->mem_head) { - dbg(": MEM Resources:\n"); - print_pci_resource (func->mem_head); - } - if (func->p_mem_head) { - dbg(": PMEM Resources:\n"); - print_pci_resource (func->p_mem_head); - } -} - -static int phprm_get_used_resources ( - struct controller *ctrl, - struct pci_func *func - ) -{ - return shpchp_save_used_resources (ctrl, func, !DISABLE_CARD); -} - -static int phprm_delete_resource( - struct pci_resource **aprh, - ulong base, - ulong size) -{ - struct pci_resource *res; - struct pci_resource *prevnode; - struct pci_resource *split_node; - ulong tbase; - - shpchp_resource_sort_and_combine(aprh); - - for (res = *aprh; res; res = res->next) { - if (res->base > base) - continue; - - if ((res->base + res->length) < (base + size)) - continue; - - if (res->base < base) { - tbase = base; - - if ((res->length - (tbase - res->base)) < size) - continue; - - split_node = (struct pci_resource *) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!split_node) - return -ENOMEM; - - split_node->base = res->base; - split_node->length = tbase - res->base; - res->base = tbase; - res->length -= split_node->length; - - split_node->next = res->next; - res->next = split_node; - } - - if (res->length >= size) { - split_node = (struct pci_resource*) kmalloc(sizeof(struct pci_resource), GFP_KERNEL); - if (!split_node) - return -ENOMEM; - - split_node->base = res->base + size; - split_node->length = res->length - size; - res->length = size; - - split_node->next = res->next; - res->next = split_node; - } - - if (*aprh == res) { - *aprh = res->next; - } else { - prevnode = *aprh; - while (prevnode->next != res) - prevnode = prevnode->next; - - prevnode->next = res->next; - } - res->next = NULL; - kfree(res); - break; - } - - return 0; -} - - -static int phprm_delete_resources( - struct pci_resource **aprh, - struct pci_resource *this - ) -{ - struct pci_resource *res; - - for (res = this; res; res = res->next) - phprm_delete_resource(aprh, res->base, res->length); - - return 0; -} - - -static int configure_existing_function( - struct controller *ctrl, - struct pci_func *func - ) -{ - int rc; - - /* see how much resources the func has used. */ - rc = phprm_get_used_resources (ctrl, func); - - if (!rc) { - /* subtract the resources used by the func from ctrl resources */ - rc = phprm_delete_resources (&ctrl->bus_head, func->bus_head); - rc |= phprm_delete_resources (&ctrl->io_head, func->io_head); - rc |= phprm_delete_resources (&ctrl->mem_head, func->mem_head); - rc |= phprm_delete_resources (&ctrl->p_mem_head, func->p_mem_head); - if (rc) - warn("aCEF: cannot del used resources\n"); - } else - err("aCEF: cannot get used resources\n"); - - return rc; -} - -static int bind_pci_resources_to_slots ( struct controller *ctrl) -{ - struct pci_func *func, new_func; - int busn = ctrl->slot_bus; - int devn, funn; - u32 vid; - - for (devn = 0; devn < 32; devn++) { - for (funn = 0; funn < 8; funn++) { - /* - if (devn == ctrl->device && funn == ctrl->function) - continue; - */ - /* find out if this entry is for an occupied slot */ - vid = 0xFFFFFFFF; - - pci_bus_read_config_dword(ctrl->pci_dev->subordinate, PCI_DEVFN(devn, funn), PCI_VENDOR_ID, &vid); - - if (vid != 0xFFFFFFFF) { - func = shpchp_slot_find(busn, devn, funn); - if (!func) { - memset(&new_func, 0, sizeof(struct pci_func)); - new_func.bus = busn; - new_func.device = devn; - new_func.function = funn; - new_func.is_a_board = 1; - configure_existing_function(ctrl, &new_func); - phprm_dump_func_res(&new_func); - } else { - configure_existing_function(ctrl, func); - phprm_dump_func_res(func); - } - dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus); - } - } - } - - return 0; -} - -static void phprm_dump_ctrl_res( struct controller *ctlr) -{ - struct controller *ctrl = ctlr; - - if (ctrl->bus_head) { - dbg(": BUS Resources:\n"); - print_pci_resource (ctrl->bus_head); - } - if (ctrl->io_head) { - dbg(": IO Resources:\n"); - print_pci_resource (ctrl->io_head); - } - if (ctrl->mem_head) { - dbg(": MEM Resources:\n"); - print_pci_resource (ctrl->mem_head); - } - if (ctrl->p_mem_head) { - dbg(": PMEM Resources:\n"); - print_pci_resource (ctrl->p_mem_head); - } -} - -/* - * phprm_find_available_resources - * - * Finds available memory, IO, and IRQ resources for programming - * devices which may be added to the system - * this function is for hot plug ADD! - * - * returns 0 if success - */ -int shpchprm_find_available_resources(struct controller *ctrl) -{ - struct pci_func func; - u32 rc; - - memset(&func, 0, sizeof(struct pci_func)); - - func.bus = ctrl->bus; - func.device = ctrl->device; - func.function = ctrl->function; - func.is_a_board = 1; - - /* Get resources for this PCI bridge */ - rc = shpchp_save_used_resources (ctrl, &func, !DISABLE_CARD); - dbg("%s: shpchp_save_used_resources rc = %d\n", __FUNCTION__, rc); - - if (func.mem_head) - func.mem_head->next = ctrl->mem_head; - ctrl->mem_head = func.mem_head; - - if (func.p_mem_head) - func.p_mem_head->next = ctrl->p_mem_head; - ctrl->p_mem_head = func.p_mem_head; - - if (func.io_head) - func.io_head->next = ctrl->io_head; - ctrl->io_head = func.io_head; - - if(func.bus_head) - func.bus_head->next = ctrl->bus_head; - ctrl->bus_head = func.bus_head; - if (ctrl->bus_head) - phprm_delete_resource(&ctrl->bus_head, ctrl->pci_dev->subordinate->number, 1); - - dbg("%s:pre-Bind PCI 0x%x Ctrl Resource Dump\n", __FUNCTION__, ctrl->bus); - phprm_dump_ctrl_res(ctrl); - bind_pci_resources_to_slots (ctrl); - - dbg("%s:post-Bind PCI 0x%x Ctrl Resource Dump\n", __FUNCTION__, ctrl->bus); - phprm_dump_ctrl_res(ctrl); - - - /* If all of the following fail, we don't have any resources for hot plug add */ - rc = 1; - rc &= shpchp_resource_sort_and_combine(&(ctrl->mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->p_mem_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->io_head)); - rc &= shpchp_resource_sort_and_combine(&(ctrl->bus_head)); - - return (rc); -} - int shpchprm_set_hpp( struct controller *ctrl, struct pci_func *func, diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.h b/drivers/pci/hotplug/shpchprm_nonacpi.h deleted file mode 100644 index cddaaa5ee1b3..000000000000 --- a/drivers/pci/hotplug/shpchprm_nonacpi.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * SHPCHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform - * - * Copyright (C) 1995,2001 Compaq Computer Corporation - * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2001 IBM Corp. - * Copyright (C) 2003-2004 Intel Corporation - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to , - * - */ - -#ifndef _SHPCHPRM_NONACPI_H_ -#define _SHPCHPRM_NONACPI_H_ - -struct irq_info { - u8 bus, devfn; /* bus, device and function */ - struct { - u8 link; /* IRQ line ID, chipset dependent, 0=not routed */ - u16 bitmap; /* Available IRQs */ - } __attribute__ ((packed)) irq[4]; - u8 slot; /* slot number, 0=onboard */ - u8 rfu; -} __attribute__ ((packed)); - -struct irq_routing_table { - u32 signature; /* PIRQ_SIGNATURE should be here */ - u16 version; /* PIRQ_VERSION */ - u16 size; /* Table size in bytes */ - u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ - u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ - u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */ - u32 miniport_data; /* Crap */ - u8 rfu[11]; - u8 checksum; /* Modulo 256 checksum must give zero */ - struct irq_info slots[0]; -} __attribute__ ((packed)); - -#endif /* _SHPCHPRM_NONACPI_H_ */ -- GitLab From 7e88ed199689f333668b62348051202706b6a74a Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:37 -0700 Subject: [PATCH 0729/1519] [PATCH] shpchp: remove redundant display of PCI device resources Info about resources assigned to PCI devices is already available through sysfs and pci utilities. There's no need for shpchp to create another sysfs file to display the same information. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp_sysfs.c | 68 ------------------------------ 1 file changed, 68 deletions(-) diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index b0e781dbcffb..ce41719a88f7 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -88,75 +88,7 @@ static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, cha } static DEVICE_ATTR (ctrl, S_IRUGO, show_ctrl, NULL); -static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev, *fdev; - struct controller *ctrl; - char * out = buf; - int index; - struct resource *res; - struct pci_func *new_slot; - struct slot *slot; - - pdev = container_of (dev, struct pci_dev, dev); - ctrl = pci_get_drvdata(pdev); - - slot=ctrl->slot; - - while (slot) { - new_slot = shpchp_slot_find(slot->bus, slot->device, 0); - if (!new_slot) - break; - fdev = new_slot->pci_dev; - if (!fdev) - break; - out += sprintf(out, "assigned resources: memory\n"); - for (index=0; index <= PCI_NUM_RESOURCES; index++) { - res = &(fdev->resource[index]); - if (res && (res->flags & IORESOURCE_MEM) && - !(res->flags & IORESOURCE_PREFETCH)) { - out += sprintf(out, - "start = %8.8lx, length = %8.8lx\n", - res->start, (res->end - res->start)); - } - } - out += sprintf(out, "assigned resources: prefetchable memory\n"); - for (index=0; index <= PCI_NUM_RESOURCES; index++) { - res = &(fdev->resource[index]); - if (res && (res->flags & (IORESOURCE_MEM | - IORESOURCE_PREFETCH))) { - out += sprintf(out, - "start = %8.8lx, length = %8.8lx\n", - res->start, (res->end - res->start)); - } - } - out += sprintf(out, "assigned resources: IO\n"); - for (index=0; index <= PCI_NUM_RESOURCES; index++) { - res = &(fdev->resource[index]); - if (res && (res->flags & IORESOURCE_IO)) { - out += sprintf(out, - "start = %8.8lx, length = %8.8lx\n", - res->start, (res->end - res->start)); - } - } - out += sprintf(out, "assigned resources: bus numbers\n"); - if (fdev->subordinate) - out += sprintf(out, "start = %8.8x, length = %8.8x\n", - fdev->subordinate->secondary, - (fdev->subordinate->subordinate - - fdev->subordinate->secondary)); - else - out += sprintf(out, "start = %8.8x, length = %8.8x\n", - fdev->bus->number, 1); - slot=slot->next; - } - - return out - buf; -} -static DEVICE_ATTR (dev, S_IRUGO, show_dev, NULL); - void shpchp_create_ctrl_files (struct controller *ctrl) { device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl); - device_create_file (&ctrl->pci_dev->dev, &dev_attr_dev); } -- GitLab From 424600f9706b20a8a33ad928d3d0326bd88679bc Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:38 -0700 Subject: [PATCH 0730/1519] [PATCH] shpchp: reduce dependence on ACPI Reduce the SHPC hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. The remaining interaction with ACPI is to run the _OSHP method to transition control of hotplug hardware from system BIOS to the shpc hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that shpchp does not enable the hot-added device or its DMA bus mastering automatically now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 12 + drivers/pci/hotplug/shpchp_core.c | 13 +- drivers/pci/hotplug/shpchp_ctrl.c | 1 - drivers/pci/hotplug/shpchp_hpc.c | 2 +- drivers/pci/hotplug/shpchp_pci.c | 52 +- drivers/pci/hotplug/shpchprm.h | 43 -- drivers/pci/hotplug/shpchprm_acpi.c | 794 ++----------------------- drivers/pci/hotplug/shpchprm_legacy.c | 97 +-- drivers/pci/hotplug/shpchprm_nonacpi.c | 108 +--- 9 files changed, 138 insertions(+), 984 deletions(-) delete mode 100644 drivers/pci/hotplug/shpchprm.h diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index deea56c73cf2..1b345ae81ddb 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -122,6 +122,13 @@ struct controller { u16 vendor_id; }; +struct hotplug_params { + u8 cache_line_size; + u8 latency_timer; + u8 enable_serr; + u8 enable_perr; +}; + /* Define AMD SHPC ID */ #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 @@ -192,6 +199,11 @@ extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ct extern int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot); extern int shpchp_configure_device(struct slot *p_slot); extern int shpchp_unconfigure_device(struct pci_func* func); +extern void get_hp_hw_control_from_firmware(struct pci_dev *dev); +extern void get_hp_params_from_firmware(struct pci_dev *dev, + struct hotplug_params *hpp); +extern int shpchprm_get_physical_slot_number(struct controller *ctrl, + u32 *sun, u8 busnum, u8 devnum); /* Global variables */ diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 8f5da504df34..e3c0c17295da 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -39,7 +39,6 @@ #include #include #include "shpchp.h" -#include "shpchprm.h" /* Global variables */ int shpchp_debug; @@ -566,16 +565,12 @@ static int __init shpcd_init(void) if (retval) goto error_hpc_init; - retval = shpchprm_init(PCI); - if (!retval) { - retval = pci_register_driver(&shpc_driver); - dbg("%s: pci_register_driver = %d\n", __FUNCTION__, retval); - info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); - } + retval = pci_register_driver(&shpc_driver); + dbg("%s: pci_register_driver = %d\n", __FUNCTION__, retval); + info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); error_hpc_init: if (retval) { - shpchprm_cleanup(); shpchp_event_stop_thread(); } return retval; @@ -586,8 +581,6 @@ static void __exit shpcd_cleanup(void) dbg("unload_shpchpd()\n"); unload_shpchpd(); - shpchprm_cleanup(); - dbg("pci_unregister_driver\n"); pci_unregister_driver(&shpc_driver); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index aa507e453e49..23dd61c4c66c 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -40,7 +40,6 @@ #include #include "../pci.h" #include "shpchp.h" -#include "shpchprm.h" static void interrupt_event_handler(struct controller *ctrl); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 8d98410bf1c0..d55a9a7f8d2b 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -1566,8 +1566,8 @@ int shpc_init(struct controller * ctrl, err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq); goto abort_free_ctlr; } - /* Execute OSHP method here */ } + get_hp_hw_control_from_firmware(pdev); dbg("%s: Before adding HPC to HPC list\n", __FUNCTION__); /* Add this HPC instance into the HPC list */ diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 89e404805777..6209972313f3 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -38,6 +38,55 @@ #include "../pci.h" #include "shpchp.h" +void program_fw_provided_values(struct pci_dev *dev) +{ + u16 pci_cmd, pci_bctl; + struct pci_dev *cdev; + struct hotplug_params hpp = {0x8, 0x40, 0, 0}; /* defaults */ + + /* Program hpp values for this device */ + if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL || + (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) + return; + + get_hp_params_from_firmware(dev, &hpp); + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp.cache_line_size); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.latency_timer); + pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); + if (hpp.enable_serr) + pci_cmd |= PCI_COMMAND_SERR; + else + pci_cmd &= ~PCI_COMMAND_SERR; + if (hpp.enable_perr) + pci_cmd |= PCI_COMMAND_PARITY; + else + pci_cmd &= ~PCI_COMMAND_PARITY; + pci_write_config_word(dev, PCI_COMMAND, pci_cmd); + + /* Program bridge control value and child devices */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, + hpp.latency_timer); + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); + if (hpp.enable_serr) + pci_bctl |= PCI_BRIDGE_CTL_SERR; + else + pci_bctl &= ~PCI_BRIDGE_CTL_SERR; + if (hpp.enable_perr) + pci_bctl |= PCI_BRIDGE_CTL_PARITY; + else + pci_bctl &= ~PCI_BRIDGE_CTL_PARITY; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); + if (dev->subordinate) { + list_for_each_entry(cdev, &dev->subordinate->devices, + bus_list) + program_fw_provided_values(cdev); + } + } +} + int shpchp_configure_device(struct slot *p_slot) { struct pci_dev *dev; @@ -90,8 +139,7 @@ int shpchp_configure_device(struct slot *p_slot) child->subordinate = pci_do_scan_bus(child); pci_bus_size_bridges(child); } - /* TBD: program firmware provided _HPP values */ - /* program_fw_provided_values(dev); */ + program_fw_provided_values(dev); } pci_bus_assign_resources(parent); diff --git a/drivers/pci/hotplug/shpchprm.h b/drivers/pci/hotplug/shpchprm.h deleted file mode 100644 index df474b27d6e8..000000000000 --- a/drivers/pci/hotplug/shpchprm.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * SHPCHPRM : SHPCHP Resource Manager for ACPI/non-ACPI platform - * - * Copyright (C) 1995,2001 Compaq Computer Corporation - * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) - * Copyright (C) 2001 IBM Corp. - * Copyright (C) 2003-2004 Intel Corporation - * - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Send feedback to , - * - */ - -#ifndef _SHPCHPRM_H_ -#define _SHPCHPRM_H_ - -#ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY -#include "shpchprm_legacy.h" -#endif - -int shpchprm_init(enum php_ctlr_type ct); -void shpchprm_cleanup(void); -int shpchprm_set_hpp(struct controller *ctrl, struct pci_func *func, u8 card_type); -void shpchprm_enable_card(struct controller *ctrl, struct pci_func *func, u8 card_type); -int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum); - -#endif /* _SHPCHPRM_H_ */ diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index 3d2f9c5269c7..3be518c7d47a 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -38,62 +38,11 @@ #include #include #include "shpchp.h" -#include "shpchprm.h" - -#define PCI_MAX_BUS 0x100 -#define ACPI_STA_DEVICE_PRESENT 0x01 #define METHOD_NAME__SUN "_SUN" #define METHOD_NAME__HPP "_HPP" #define METHOD_NAME_OSHP "OSHP" -#define PHP_RES_BUS 0xA0 -#define PHP_RES_IO 0xA1 -#define PHP_RES_MEM 0xA2 -#define PHP_RES_PMEM 0xA3 - -#define BRIDGE_TYPE_P2P 0x00 -#define BRIDGE_TYPE_HOST 0x01 - -/* this should go to drivers/acpi/include/ */ -struct acpi__hpp { - u8 cache_line_size; - u8 latency_timer; - u8 enable_serr; - u8 enable_perr; -}; - -struct acpi_php_slot { - struct acpi_php_slot *next; - struct acpi_bridge *bridge; - acpi_handle handle; - int seg; - int bus; - int dev; - int fun; - u32 sun; - void *slot_ops; /* _STA, _EJx, etc */ - struct slot *slot; -}; /* per func */ - -struct acpi_bridge { - struct acpi_bridge *parent; - struct acpi_bridge *next; - struct acpi_bridge *child; - acpi_handle handle; - int seg; - int pbus; /* pdev->bus->number */ - int pdevice; /* PCI_SLOT(pdev->devfn) */ - int pfunction; /* PCI_DEVFN(pdev->devfn) */ - int bus; /* pdev->subordinate->number */ - struct acpi__hpp *_hpp; - struct acpi_php_slot *slots; - int scanned; - int type; -}; - -static struct acpi_bridge *acpi_bridges_head; - static u8 * acpi_path_name( acpi_handle handle) { acpi_status status; @@ -109,82 +58,43 @@ static u8 * acpi_path_name( acpi_handle handle) return path_name; } -static void acpi_get__hpp ( struct acpi_bridge *ab); -static void acpi_run_oshp ( struct acpi_bridge *ab); - -static int acpi_add_slot_to_php_slots( - struct acpi_bridge *ab, - int bus_num, - acpi_handle handle, - u32 adr, - u32 sun - ) -{ - struct acpi_php_slot *aps; - static long samesun = -1; - - aps = (struct acpi_php_slot *) kmalloc (sizeof(struct acpi_php_slot), GFP_KERNEL); - if (!aps) { - err ("acpi_shpchprm: alloc for aps fail\n"); - return -1; - } - memset(aps, 0, sizeof(struct acpi_php_slot)); - - aps->handle = handle; - aps->bus = bus_num; - aps->dev = (adr >> 16) & 0xffff; - aps->fun = adr & 0xffff; - aps->sun = sun; - - aps->next = ab->slots; /* cling to the bridge */ - aps->bridge = ab; - ab->slots = aps; - - ab->scanned += 1; - if (!ab->_hpp) - acpi_get__hpp(ab); - - acpi_run_oshp(ab); - - if (sun != samesun) { - info("acpi_shpchprm: Slot sun(%x) at s:b:d:f=0x%02x:%02x:%02x:%02x\n", aps->sun, ab->seg, - aps->bus, aps->dev, aps->fun); - samesun = sun; - } - return 0; -} - -static void acpi_get__hpp ( struct acpi_bridge *ab) +static acpi_status +acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp) { acpi_status status; u8 nui[4]; struct acpi_buffer ret_buf = { 0, NULL}; union acpi_object *ext_obj, *package; - u8 *path_name = acpi_path_name(ab->handle); + u8 *path_name = acpi_path_name(handle); int i, len = 0; /* get _hpp */ - status = acpi_evaluate_object(ab->handle, METHOD_NAME__HPP, NULL, &ret_buf); + status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf); switch (status) { case AE_BUFFER_OVERFLOW: ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL); if (!ret_buf.pointer) { - err ("acpi_shpchprm:%s alloc for _HPP fail\n", path_name); - return; + err ("%s:%s alloc for _HPP fail\n", __FUNCTION__, + path_name); + return AE_NO_MEMORY; } - status = acpi_evaluate_object(ab->handle, METHOD_NAME__HPP, NULL, &ret_buf); + status = acpi_evaluate_object(handle, METHOD_NAME__HPP, + NULL, &ret_buf); if (ACPI_SUCCESS(status)) break; default: if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s _HPP fail=0x%x\n", path_name, status); - return; + dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__, + path_name, status); + return status; } } ext_obj = (union acpi_object *) ret_buf.pointer; if (ext_obj->type != ACPI_TYPE_PACKAGE) { - err ("acpi_shpchprm:%s _HPP obj not a package\n", path_name); + err ("%s:%s _HPP obj not a package\n", __FUNCTION__, + path_name); + status = AE_ERROR; goto free_and_return; } @@ -197,553 +107,41 @@ static void acpi_get__hpp ( struct acpi_bridge *ab) nui[i] = (u8)ext_obj->integer.value; break; default: - err ("acpi_shpchprm:%s _HPP obj type incorrect\n", path_name); + err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__, + path_name); + status = AE_ERROR; goto free_and_return; } } - ab->_hpp = kmalloc (sizeof (struct acpi__hpp), GFP_KERNEL); - if (!ab->_hpp) { - err ("acpi_shpchprm:%s alloc for _HPP failed\n", path_name); - goto free_and_return; - } - memset(ab->_hpp, 0, sizeof(struct acpi__hpp)); - - ab->_hpp->cache_line_size = nui[0]; - ab->_hpp->latency_timer = nui[1]; - ab->_hpp->enable_serr = nui[2]; - ab->_hpp->enable_perr = nui[3]; + hpp->cache_line_size = nui[0]; + hpp->latency_timer = nui[1]; + hpp->enable_serr = nui[2]; + hpp->enable_perr = nui[3]; - dbg(" _HPP: cache_line_size=0x%x\n", ab->_hpp->cache_line_size); - dbg(" _HPP: latency timer =0x%x\n", ab->_hpp->latency_timer); - dbg(" _HPP: enable SERR =0x%x\n", ab->_hpp->enable_serr); - dbg(" _HPP: enable PERR =0x%x\n", ab->_hpp->enable_perr); + dbg(" _HPP: cache_line_size=0x%x\n", hpp->cache_line_size); + dbg(" _HPP: latency timer =0x%x\n", hpp->latency_timer); + dbg(" _HPP: enable SERR =0x%x\n", hpp->enable_serr); + dbg(" _HPP: enable PERR =0x%x\n", hpp->enable_perr); free_and_return: kfree(ret_buf.pointer); + return status; } -static void acpi_run_oshp ( struct acpi_bridge *ab) -{ - acpi_status status; - u8 *path_name = acpi_path_name(ab->handle); - - /* run OSHP */ - status = acpi_evaluate_object(ab->handle, METHOD_NAME_OSHP, NULL, NULL); - if (ACPI_FAILURE(status)) { - err("acpi_pciehprm:%s OSHP fails=0x%x\n", path_name, status); - } else - dbg("acpi_pciehprm:%s OSHP passes =0x%x\n", path_name, status); - return; -} - -/* find acpi_bridge downword from ab. */ -static struct acpi_bridge * -find_acpi_bridge_by_bus( - struct acpi_bridge *ab, - int seg, - int bus /* pdev->subordinate->number */ - ) -{ - struct acpi_bridge *lab = NULL; - - if (!ab) - return NULL; - - if ((ab->bus == bus) && (ab->seg == seg)) - return ab; - - if (ab->child) - lab = find_acpi_bridge_by_bus(ab->child, seg, bus); - - if (!lab) - if (ab->next) - lab = find_acpi_bridge_by_bus(ab->next, seg, bus); - - return lab; -} - -/* - * Build a device tree of ACPI PCI Bridges - */ -static void shpchprm_acpi_register_a_bridge ( - struct acpi_bridge **head, - struct acpi_bridge *pab, /* parent bridge to which child bridge is added */ - struct acpi_bridge *cab /* child bridge to add */ - ) -{ - struct acpi_bridge *lpab; - struct acpi_bridge *lcab; - - lpab = find_acpi_bridge_by_bus(*head, pab->seg, pab->bus); - if (!lpab) { - if (!(pab->type & BRIDGE_TYPE_HOST)) - warn("PCI parent bridge s:b(%x:%x) not in list.\n", pab->seg, pab->bus); - pab->next = *head; - *head = pab; - lpab = pab; - } - - if ((cab->type & BRIDGE_TYPE_HOST) && (pab == cab)) - return; - - lcab = find_acpi_bridge_by_bus(*head, cab->seg, cab->bus); - if (lcab) { - if ((pab->bus != lcab->parent->bus) || (lcab->bus != cab->bus)) - err("PCI child bridge s:b(%x:%x) in list with diff parent.\n", cab->seg, cab->bus); - return; - } else - lcab = cab; - - lcab->parent = lpab; - lcab->next = lpab->child; - lpab->child = lcab; -} - -static acpi_status shpchprm_acpi_build_php_slots_callback( - acpi_handle handle, - u32 Level, - void *context, - void **retval - ) +static void acpi_run_oshp(acpi_handle handle) { - ulong bus_num; - ulong seg_num; - ulong sun, adr; - ulong padr = 0; - acpi_handle phandle = NULL; - struct acpi_bridge *pab = (struct acpi_bridge *)context; - struct acpi_bridge *lab; acpi_status status; u8 *path_name = acpi_path_name(handle); - /* get _SUN */ - status = acpi_evaluate_integer(handle, METHOD_NAME__SUN, NULL, &sun); - switch(status) { - case AE_NOT_FOUND: - return AE_OK; - default: - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s _SUN fail=0x%x\n", path_name, status); - return status; - } - } - - /* get _ADR. _ADR must exist if _SUN exists */ - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status); - return status; - } - - dbg("acpi_shpchprm:%s sun=0x%08x adr=0x%08x\n", path_name, (u32)sun, (u32)adr); - - status = acpi_get_parent(handle, &phandle); + /* run OSHP */ + status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL); if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s get_parent fail=0x%x\n", path_name, status); - return (status); - } - - bus_num = pab->bus; - seg_num = pab->seg; - - if (pab->bus == bus_num) { - lab = pab; + err("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name, + status); } else { - dbg("WARN: pab is not parent\n"); - lab = find_acpi_bridge_by_bus(pab, seg_num, bus_num); - if (!lab) { - dbg("acpi_shpchprm: alloc new P2P bridge(%x) for sun(%08x)\n", (u32)bus_num, (u32)sun); - lab = (struct acpi_bridge *)kmalloc(sizeof(struct acpi_bridge), GFP_KERNEL); - if (!lab) { - err("acpi_shpchprm: alloc for ab fail\n"); - return AE_NO_MEMORY; - } - memset(lab, 0, sizeof(struct acpi_bridge)); - - lab->handle = phandle; - lab->pbus = pab->bus; - lab->pdevice = (int)(padr >> 16) & 0xffff; - lab->pfunction = (int)(padr & 0xffff); - lab->bus = (int)bus_num; - lab->scanned = 0; - lab->type = BRIDGE_TYPE_P2P; - - shpchprm_acpi_register_a_bridge (&acpi_bridges_head, pab, lab); - } else - dbg("acpi_shpchprm: found P2P bridge(%x) for sun(%08x)\n", (u32)bus_num, (u32)sun); - } - - acpi_add_slot_to_php_slots(lab, (int)bus_num, handle, (u32)adr, (u32)sun); - return (status); -} - -static int shpchprm_acpi_build_php_slots( - struct acpi_bridge *ab, - u32 depth - ) -{ - acpi_status status; - u8 *path_name = acpi_path_name(ab->handle); - - /* Walk down this pci bridge to get _SUNs if any behind P2P */ - status = acpi_walk_namespace ( ACPI_TYPE_DEVICE, - ab->handle, - depth, - shpchprm_acpi_build_php_slots_callback, - ab, - NULL ); - if (ACPI_FAILURE(status)) { - dbg("acpi_shpchprm:%s walk for _SUN on pci bridge seg:bus(%x:%x) fail=0x%x\n", path_name, ab->seg, ab->bus, status); - return -1; - } - - return 0; -} - -static void build_a_bridge( - struct acpi_bridge *pab, - struct acpi_bridge *ab - ) -{ - u8 *path_name = acpi_path_name(ab->handle); - - shpchprm_acpi_register_a_bridge (&acpi_bridges_head, pab, ab); - - switch (ab->type) { - case BRIDGE_TYPE_HOST: - dbg("acpi_shpchprm: Registered PCI HOST Bridge(%02x) on s:b:d:f(%02x:%02x:%02x:%02x) [%s]\n", - ab->bus, ab->seg, ab->pbus, ab->pdevice, ab->pfunction, path_name); - break; - case BRIDGE_TYPE_P2P: - dbg("acpi_shpchprm: Registered PCI P2P Bridge(%02x-%02x) on s:b:d:f(%02x:%02x:%02x:%02x) [%s]\n", - ab->pbus, ab->bus, ab->seg, ab->pbus, ab->pdevice, ab->pfunction, path_name); - break; - }; - - /* build any immediate PHP slots under this pci bridge */ - shpchprm_acpi_build_php_slots(ab, 1); -} - -static struct acpi_bridge * add_p2p_bridge( - acpi_handle handle, - struct acpi_bridge *pab, /* parent */ - ulong adr - ) -{ - struct acpi_bridge *ab; - struct pci_dev *pdev; - ulong devnum, funcnum; - u8 *path_name = acpi_path_name(handle); - - ab = (struct acpi_bridge *) kmalloc (sizeof(struct acpi_bridge), GFP_KERNEL); - if (!ab) { - err("acpi_shpchprm: alloc for ab fail\n"); - return NULL; - } - memset(ab, 0, sizeof(struct acpi_bridge)); - - devnum = (adr >> 16) & 0xffff; - funcnum = adr & 0xffff; - - pdev = pci_find_slot(pab->bus, PCI_DEVFN(devnum, funcnum)); - if (!pdev || !pdev->subordinate) { - err("acpi_shpchprm:%s is not a P2P Bridge\n", path_name); - kfree(ab); - return NULL; - } - - ab->handle = handle; - ab->seg = pab->seg; - ab->pbus = pab->bus; /* or pdev->bus->number */ - ab->pdevice = devnum; /* or PCI_SLOT(pdev->devfn) */ - ab->pfunction = funcnum; /* or PCI_FUNC(pdev->devfn) */ - ab->bus = pdev->subordinate->number; - ab->scanned = 0; - ab->type = BRIDGE_TYPE_P2P; - - dbg("acpi_shpchprm: P2P(%x-%x) on pci=b:d:f(%x:%x:%x) acpi=b:d:f(%x:%x:%x) [%s]\n", - pab->bus, ab->bus, pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), - pab->bus, (u32)devnum, (u32)funcnum, path_name); - - build_a_bridge(pab, ab); - - return ab; -} - -static acpi_status scan_p2p_bridge( - acpi_handle handle, - u32 Level, - void *context, - void **retval - ) -{ - struct acpi_bridge *pab = (struct acpi_bridge *)context; - struct acpi_bridge *ab; - acpi_status status; - ulong adr = 0; - u8 *path_name = acpi_path_name(handle); - ulong devnum, funcnum; - struct pci_dev *pdev; - - /* get device, function */ - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) - err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status); - return AE_OK; + dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name); } - - devnum = (adr >> 16) & 0xffff; - funcnum = adr & 0xffff; - - pdev = pci_find_slot(pab->bus, PCI_DEVFN(devnum, funcnum)); - if (!pdev) - return AE_OK; - if (!pdev->subordinate) - return AE_OK; - - ab = add_p2p_bridge(handle, pab, adr); - if (ab) { - status = acpi_walk_namespace ( ACPI_TYPE_DEVICE, - handle, - (u32)1, - scan_p2p_bridge, - ab, - NULL); - if (ACPI_FAILURE(status)) - dbg("acpi_shpchprm:%s find_p2p fail=0x%x\n", path_name, status); - } - - return AE_OK; -} - -static struct acpi_bridge * add_host_bridge( - acpi_handle handle, - ulong segnum, - ulong busnum - ) -{ - ulong adr = 0; - acpi_status status; - struct acpi_bridge *ab; - u8 *path_name = acpi_path_name(handle); - - /* get device, function: host br adr is always 0000 though. */ - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s _ADR fail=0x%x\n", path_name, status); - return NULL; - } - dbg("acpi_shpchprm: ROOT PCI seg(0x%x)bus(0x%x)dev(0x%x)func(0x%x) [%s]\n", (u32)segnum, (u32)busnum, - (u32)(adr >> 16) & 0xffff, (u32)adr & 0xffff, path_name); - - ab = (struct acpi_bridge *) kmalloc (sizeof(struct acpi_bridge), GFP_KERNEL); - if (!ab) { - err("acpi_shpchprm: alloc for ab fail\n"); - return NULL; - } - memset(ab, 0, sizeof(struct acpi_bridge)); - - ab->handle = handle; - ab->seg = (int)segnum; - ab->bus = ab->pbus = (int)busnum; - ab->pdevice = (int)(adr >> 16) & 0xffff; - ab->pfunction = (int)(adr & 0xffff); - ab->scanned = 0; - ab->type = BRIDGE_TYPE_HOST; - - build_a_bridge(ab, ab); - - return ab; -} - -static acpi_status acpi_scan_from_root_pci_callback ( - acpi_handle handle, - u32 Level, - void *context, - void **retval - ) -{ - ulong segnum = 0; - ulong busnum = 0; - acpi_status status; - struct acpi_bridge *ab; - u8 *path_name = acpi_path_name(handle); - - /* get bus number of this pci root bridge */ - status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL, &segnum); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) { - err("acpi_shpchprm:%s evaluate _SEG fail=0x%x\n", path_name, status); - return status; - } - segnum = 0; - } - - /* get bus number of this pci root bridge */ - status = acpi_evaluate_integer(handle, METHOD_NAME__BBN, NULL, &busnum); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:%s evaluate _BBN fail=0x%x\n", path_name, status); - return (status); - } - - ab = add_host_bridge(handle, segnum, busnum); - if (ab) { - status = acpi_walk_namespace ( ACPI_TYPE_DEVICE, - handle, - 1, - scan_p2p_bridge, - ab, - NULL); - if (ACPI_FAILURE(status)) - dbg("acpi_shpchprm:%s find_p2p fail=0x%x\n", path_name, status); - } - - return AE_OK; -} - -static int shpchprm_acpi_scan_pci (void) -{ - acpi_status status; - - /* - * TBD: traverse LDM device tree with the help of - * unified ACPI augmented for php device population. - */ - status = acpi_get_devices ( PCI_ROOT_HID_STRING, - acpi_scan_from_root_pci_callback, - NULL, - NULL ); - if (ACPI_FAILURE(status)) { - err("acpi_shpchprm:get_device PCI ROOT HID fail=0x%x\n", status); - return -1; - } - - return 0; -} - -int shpchprm_init(enum php_ctlr_type ctlr_type) -{ - int rc; - - if (ctlr_type != PCI) - return -ENODEV; - - dbg("shpchprm ACPI init \n"); - acpi_bridges_head = NULL; - - /* construct PCI bus:device tree of acpi_handles */ - rc = shpchprm_acpi_scan_pci(); - if (rc) - return rc; - - dbg("shpchprm ACPI init %s\n", (rc)?"fail":"success"); - return rc; -} - -static void free_a_slot(struct acpi_php_slot *aps) -{ - dbg(" free a php func of slot(0x%02x) on PCI b:d:f=0x%02x:%02x:%02x\n", aps->sun, aps->bus, aps->dev, aps->fun); - - kfree(aps); -} - -static void free_a_bridge( struct acpi_bridge *ab) -{ - struct acpi_php_slot *aps, *next; - - switch (ab->type) { - case BRIDGE_TYPE_HOST: - dbg("Free ACPI PCI HOST Bridge(%x) [%s] on s:b:d:f(%x:%x:%x:%x)\n", - ab->bus, acpi_path_name(ab->handle), ab->seg, ab->pbus, ab->pdevice, ab->pfunction); - break; - case BRIDGE_TYPE_P2P: - dbg("Free ACPI PCI P2P Bridge(%x-%x) [%s] on s:b:d:f(%x:%x:%x:%x)\n", - ab->pbus, ab->bus, acpi_path_name(ab->handle), ab->seg, ab->pbus, ab->pdevice, ab->pfunction); - break; - }; - - /* free slots first */ - for (aps = ab->slots; aps; aps = next) { - next = aps->next; - free_a_slot(aps); - } - - kfree(ab); -} - -static void shpchprm_free_bridges ( struct acpi_bridge *ab) -{ - if (!ab) - return; - - if (ab->child) - shpchprm_free_bridges (ab->child); - - if (ab->next) - shpchprm_free_bridges (ab->next); - - free_a_bridge(ab); -} - -void shpchprm_cleanup(void) -{ - shpchprm_free_bridges (acpi_bridges_head); -} - -static int get_number_of_slots ( - struct acpi_bridge *ab, - int selfonly - ) -{ - struct acpi_php_slot *aps; - int prev_slot = -1; - int slot_num = 0; - - for ( aps = ab->slots; aps; aps = aps->next) - if (aps->dev != prev_slot) { - prev_slot = aps->dev; - slot_num++; - } - - if (ab->child) - slot_num += get_number_of_slots (ab->child, 0); - - if (selfonly) - return slot_num; - - if (ab->next) - slot_num += get_number_of_slots (ab->next, 0); - - return slot_num; -} - -static struct acpi_php_slot * get_acpi_slot ( - struct acpi_bridge *ab, - u32 sun - ) -{ - struct acpi_php_slot *aps = NULL; - - for ( aps = ab->slots; aps; aps = aps->next) - if (aps->sun == sun) - return aps; - - if (!aps && ab->child) { - aps = (struct acpi_php_slot *)get_acpi_slot (ab->child, sun); - if (aps) - return aps; - } - - if (!aps && ab->next) { - aps = (struct acpi_php_slot *)get_acpi_slot (ab->next, sun); - if (aps) - return aps; - } - - return aps; - } int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) @@ -755,108 +153,40 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -int shpchprm_set_hpp( - struct controller *ctrl, - struct pci_func *func, - u8 card_type - ) +void get_hp_hw_control_from_firmware(struct pci_dev *dev) { - struct acpi_bridge *ab; - struct pci_bus lpci_bus, *pci_bus; - int rc = 0; - unsigned int devfn; - u8 cls= 0x08; /* default cache line size */ - u8 lt = 0x40; /* default latency timer */ - u8 ep = 0; - u8 es = 0; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus); - - if (ab) { - if (ab->_hpp) { - lt = (u8)ab->_hpp->latency_timer; - cls = (u8)ab->_hpp->cache_line_size; - ep = (u8)ab->_hpp->enable_perr; - es = (u8)ab->_hpp->enable_serr; - } else - dbg("_hpp: no _hpp for B/D/F=%#x/%#x/%#x. use default value\n", func->bus, func->device, func->function); - } else - dbg("_hpp: no acpi bridge for B/D/F = %#x/%#x/%#x. use default value\n", func->bus, func->device, func->function); - - - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - /* set subordinate Latency Timer */ - rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, lt); - } - - /* set base Latency Timer */ - rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, lt); - dbg(" set latency timer =0x%02x: %x\n", lt, rc); - - rc |= pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, cls); - dbg(" set cache_line_size=0x%02x: %x\n", cls, rc); - - return rc; + /* + * OSHP is an optional ACPI firmware control method. If present, + * we need to run it to inform BIOS that we will control SHPC + * hardware from now on. + */ + acpi_handle handle = DEVICE_ACPI_HANDLE(&(dev->dev)); + if (!handle) + return; + acpi_run_oshp(handle); } -void shpchprm_enable_card( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) +void get_hp_params_from_firmware(struct pci_dev *dev, + struct hotplug_params *hpp) { - u16 command, cmd, bcommand, bcmd; - struct pci_bus lpci_bus, *pci_bus; - struct acpi_bridge *ab; - unsigned int devfn; - int rc; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command); - - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand); - } - - cmd = command = command | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE - | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; - bcmd = bcommand = bcommand | PCI_BRIDGE_CTL_NO_ISA; + acpi_status status = AE_NOT_FOUND; + struct pci_dev *pdev = dev; - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus); - if (ab) { - if (ab->_hpp) { - if (ab->_hpp->enable_perr) { - command |= PCI_COMMAND_PARITY; - bcommand |= PCI_BRIDGE_CTL_PARITY; - } else { - command &= ~PCI_COMMAND_PARITY; - bcommand &= ~PCI_BRIDGE_CTL_PARITY; - } - if (ab->_hpp->enable_serr) { - command |= PCI_COMMAND_SERR; - bcommand |= PCI_BRIDGE_CTL_SERR; - } else { - command &= ~PCI_COMMAND_SERR; - bcommand &= ~PCI_BRIDGE_CTL_SERR; - } - } else - dbg("no _hpp for B/D/F = %#x/%#x/%#x.\n", func->bus, func->device, func->function); - } else - dbg("no acpi bridge for B/D/F = %#x/%#x/%#x.\n", func->bus, func->device, func->function); - - if (command != cmd) { - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - } - if ((card_type == PCI_HEADER_TYPE_BRIDGE) && (bcommand != bcmd)) { - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand); + /* + * _HPP settings apply to all child buses, until another _HPP is + * encountered. If we don't find an _HPP for the input pci dev, + * look for it in the parent device scope since that would apply to + * this pci dev. If we don't find any _HPP, use hardcoded defaults + */ + while (pdev && (ACPI_FAILURE(status))) { + acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev)); + if (!handle) + break; + status = acpi_run_hpp(handle, hpp); + if (!(pdev->bus->parent)) + break; + /* Check if a parent object supports _HPP */ + pdev = pdev->bus->parent->self; } } diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c index 6c27debe9522..cfc6092e2afd 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.c +++ b/drivers/pci/hotplug/shpchprm_legacy.c @@ -37,10 +37,6 @@ #include "shpchp.h" #include "shpchprm.h" -void shpchprm_cleanup(void) -{ -} - int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { int offset = devnum - ctrl->slot_device_offset; @@ -49,97 +45,14 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -int shpchprm_set_hpp( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) +void get_hp_params_from_firmware(struct pci_dev *dev, + struct hotplug_params *hpp) { - u32 rc; - u8 temp_byte; - struct pci_bus lpci_bus, *pci_bus; - unsigned int devfn; - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - temp_byte = 0x40; /* hard coded value for LT */ - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - /* set subordinate Latency Timer */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte); - if (rc) { - dbg("%s: set secondary LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, - func->device, func->function); - return rc; - } - } - - /* set base Latency Timer */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte); - if (rc) { - dbg("%s: set LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function); - return rc; - } - - /* set Cache Line size */ - temp_byte = 0x08; /* hard coded value for CLS */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte); - if (rc) { - dbg("%s: set CLS error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function); - } - - /* set enable_perr */ - /* set enable_serr */ - - return rc; + return; } -void shpchprm_enable_card( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) +void get_hp_hw_control_from_firmware(struct pci_dev *dev) { - u16 command, bcommand; - struct pci_bus lpci_bus, *pci_bus; - unsigned int devfn; - int rc; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command); - command |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR - | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE - | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand); - bcommand |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR - | PCI_BRIDGE_CTL_NO_ISA; - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand); - } -} - -static int legacy_shpchprm_init_pci(void) -{ - return 0; + return; } -int shpchprm_init(enum php_ctlr_type ctrl_type) -{ - int retval; - - switch (ctrl_type) { - case PCI: - retval = legacy_shpchprm_init_pci(); - break; - default: - retval = -ENODEV; - break; - } - - return retval; -} diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c index 9d4ccae5f78e..f36c188c23eb 100644 --- a/drivers/pci/hotplug/shpchprm_nonacpi.c +++ b/drivers/pci/hotplug/shpchprm_nonacpi.c @@ -37,11 +37,6 @@ #include "shpchp.h" #include "shpchprm.h" -void shpchprm_cleanup(void) -{ - return; -} - int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { int offset = devnum - ctrl->slot_device_offset; @@ -51,106 +46,13 @@ int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busn return 0; } -int shpchprm_set_hpp( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) -{ - u32 rc; - u8 temp_byte; - struct pci_bus lpci_bus, *pci_bus; - unsigned int devfn; - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - temp_byte = 0x40; /* hard coded value for LT */ - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - /* set subordinate Latency Timer */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte); - - if (rc) { - dbg("%s: set secondary LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, - func->device, func->function); - return rc; - } - } - - /* set base Latency Timer */ - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte); - - if (rc) { - dbg("%s: set LT error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function); - return rc; - } - - /* set Cache Line size */ - temp_byte = 0x08; /* hard coded value for CLS */ - - rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte); - - if (rc) { - dbg("%s: set CLS error. b:d:f(%02x:%02x:%02x)\n", __FUNCTION__, func->bus, func->device, func->function); - } - - /* set enable_perr */ - /* set enable_serr */ - - return rc; -} - -void shpchprm_enable_card( - struct controller *ctrl, - struct pci_func *func, - u8 card_type) +void get_hp_params_from_firmware(struct pci_dev *dev, + struct hotplug_params *hpp) { - u16 command, bcommand; - struct pci_bus lpci_bus, *pci_bus; - unsigned int devfn; - int rc; - - memcpy(&lpci_bus, ctrl->pci_bus, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &command); - - command |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR - | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE - | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; - - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - - if (card_type == PCI_HEADER_TYPE_BRIDGE) { - - rc = pci_bus_read_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, &bcommand); - - bcommand |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR - | PCI_BRIDGE_CTL_NO_ISA; - - rc = pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, bcommand); - } -} - -static int legacy_shpchprm_init_pci(void) -{ - return 0; + return; } -int shpchprm_init(enum php_ctlr_type ctrl_type) +void get_hp_hw_control_from_firmware(struct pci_dev *dev) { - int retval; - - switch (ctrl_type) { - case PCI: - retval = legacy_shpchprm_init_pci(); - break; - default: - retval = -ENODEV; - break; - } - - return retval; + return; } -- GitLab From 1410dc1cef1e2f5e90c1fcb97041f42e0eee35b4 Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:39 -0700 Subject: [PATCH 0731/1519] [PATCH] shpchp: detect SHPC capability before doing a lot of work The shpc driver registers its probe function for all pci-pci bridges in the system. Not all of them will be shpc capable, so look for this capability early in the probe function and return if there's no work to do on this bridge. The old shpc driver did some initialization work on all bridges before detecting that shpc is not supported and unwinds the work it's already done in that case. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp_core.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index e3c0c17295da..3132d60a79f5 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -351,6 +351,17 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp return 0; } +static int is_shpc_capable(struct pci_dev *dev) +{ + if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == + PCI_DEVICE_ID_AMD_GOLAM_7450)) + return 1; + if (pci_find_capability(dev, PCI_CAP_ID_SHPC)) + return 1; + + return 0; +} + static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { int rc; @@ -359,6 +370,9 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int first_device_num; /* first PCI device number supported by this SHPC */ int num_ctlr_slots; /* number of slots supported by this SHPC */ + if (!is_shpc_capable(pdev)) + return -ENODEV; + ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL); if (!ctrl) { err("%s : out of memory\n", __FUNCTION__); -- GitLab From 70b6091946ab486c4dab8abeb4a3fc2bf7d3e7fe Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:40 -0700 Subject: [PATCH 0732/1519] [PATCH] shpchp: dont save PCI config for hotplug slots/devices This patch eliminates saving the PCI config header for devices in hotplug capable slots. We now use the PCI core to get the specific parts of the config header as required. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 1 - drivers/pci/hotplug/shpchp_core.c | 7 - drivers/pci/hotplug/shpchp_ctrl.c | 48 +++-- drivers/pci/hotplug/shpchp_pci.c | 314 ------------------------------ 4 files changed, 32 insertions(+), 338 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 1b345ae81ddb..5e99260987e8 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -63,7 +63,6 @@ struct pci_func { u8 switch_save; u8 presence_save; u8 pwr_save; - u32 config_space[0x20]; struct pci_dev* pci_dev; }; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 3132d60a79f5..5d4fc28969d0 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -424,13 +424,6 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) first_device_num = ctrl->slot_device_offset; num_ctlr_slots = ctrl->num_slots; - /* Store PCI Config Space for all devices on this bus */ - rc = shpchp_save_config(ctrl, ctrl->slot_bus, num_ctlr_slots, first_device_num); - if (rc) { - err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc); - goto err_out_free_ctrl_bus; - } - ctrl->add_support = 1; /* Setup the slot information structures */ diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 23dd61c4c66c..c55103f3cebd 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -328,21 +328,20 @@ static int slot_remove(struct pci_func * old_slot) /** * bridge_slot_remove - Removes a node from the linked list of slots. * @bridge: bridge to remove + * @secondaryBus: secondary PCI bus number for bridge being removed + * @subordinateBus: subordinate PCI bus number for bridge being removed * * Returns 0 if successful, !0 otherwise. */ -static int bridge_slot_remove(struct pci_func *bridge) +static int bridge_slot_remove(struct pci_func *bridge, u8 secondaryBus, + u8 subordinateBus) { - u8 subordinateBus, secondaryBus; u8 tempBus; struct pci_func *next; if (bridge == NULL) return(1); - secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF; - subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF; - for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { next = shpchp_slot_list[tempBus]; @@ -410,16 +409,23 @@ struct pci_func *shpchp_slot_find(u8 bus, u8 device, u8 index) return(NULL); } -static int is_bridge(struct pci_func * func) +static int is_bridge(struct pci_func *func, struct controller *ctrl) { - /* Check the header type */ - if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01) + u8 hdr_type; + struct pci_bus *bus = ctrl->pci_dev->subordinate; + + /* + * Note: device may have just been hot-added and not yet scanned + * by the pci core, so its pci_dev structure may not exist yet + */ + pci_bus_read_config_byte(bus, PCI_DEVFN(func->device, func->function), + PCI_HEADER_TYPE, &hdr_type); + if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) return 1; else return 0; } - /* The following routines constitute the bulk of the hotplug controller logic */ @@ -709,8 +715,6 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) goto err_exit; } - shpchp_save_slot_config(ctrl, func); - func->status = 0; func->switch_save = 0x10; func->is_a_board = 0x01; @@ -769,10 +773,18 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) u8 hp_slot; u32 rc; struct slot *p_slot; + u8 secondary = 0, subordinate = 0; + int remove_bridge; if (func == NULL) return(1); + if ((remove_bridge = is_bridge(func, ctrl))) { + /* Stash away bus information before we destroy it */ + secondary = func->pci_dev->subordinate->secondary; + subordinate = func->pci_dev->subordinate->subordinate; + } + if (shpchp_unconfigure_device(func)) return(1); @@ -825,10 +837,11 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) if (ctrl->add_support) { while (func) { - if (is_bridge(func)) { + if (remove_bridge) { dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); - bridge_slot_remove(func); + bridge_slot_remove(func, secondary, + subordinate); } else dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function); @@ -1185,9 +1198,12 @@ int shpchp_enable_slot (struct slot *p_slot) rc = board_added(func, p_slot->ctrl); if (rc) { - if (is_bridge(func)) - bridge_slot_remove(func); - else + if (is_bridge(func, p_slot->ctrl)) { + u8 secondary = func->pci_dev->subordinate->secondary; + u8 subordinate = + func->pci_dev->subordinate->subordinate; + bridge_slot_remove(func, secondary, subordinate); + } else slot_remove(func); /* Setup slot structure with entry for empty slot */ diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 6209972313f3..f51a97d7611f 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -166,317 +166,3 @@ int shpchp_unconfigure_device(struct pci_func* func) return rc; } -/* More PCI configuration routines; this time centered around hotplug controller */ - - -/* - * shpchp_save_config - * - * Reads configuration for all slots in a PCI bus and saves info. - * - * Note: For non-hot plug busses, the slot # saved is the device # - * - * returns 0 if success - */ -int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num) -{ - int rc; - u8 class_code; - u8 header_type; - u32 ID; - u8 secondary_bus; - struct pci_func *new_slot; - int sub_bus; - int FirstSupported; - int LastSupported; - int max_functions; - int function; - u8 DevError; - int device = 0; - int cloop = 0; - int stop_it; - int index; - int is_hot_plug = num_ctlr_slots || first_device_num; - struct pci_bus lpci_bus, *pci_bus; - - dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__, - num_ctlr_slots, first_device_num); - - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - - dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__, - num_ctlr_slots, first_device_num); - - /* Decide which slots are supported */ - if (is_hot_plug) { - /********************************* - * is_hot_plug is the slot mask - *********************************/ - FirstSupported = first_device_num; - LastSupported = FirstSupported + num_ctlr_slots - 1; - } else { - FirstSupported = 0; - LastSupported = 0x1F; - } - - dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported, - LastSupported); - - /* Save PCI configuration space for all devices in supported slots */ - pci_bus->number = busnumber; - for (device = FirstSupported; device <= LastSupported; device++) { - ID = 0xFFFFFFFF; - rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0), - PCI_VENDOR_ID, &ID); - - if (ID != 0xFFFFFFFF) { /* device in slot */ - rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0), - 0x0B, &class_code); - if (rc) - return rc; - - rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0), - PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; - - dbg("class_code = %x, header_type = %x\n", class_code, header_type); - - /* If multi-function device, set max_functions to 8 */ - if (header_type & 0x80) - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - DevError = 0; - - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* P-P Bridge */ - /* Recurse the subordinate bus - * get the subordinate bus number - */ - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - PCI_SECONDARY_BUS, &secondary_bus); - if (rc) { - return rc; - } else { - sub_bus = (int) secondary_bus; - - /* Save secondary bus cfg spc with this recursive call. */ - rc = shpchp_save_config(ctrl, sub_bus, 0, 0); - if (rc) - return rc; - } - } - - index = 0; - new_slot = shpchp_slot_find(busnumber, device, index++); - - dbg("new_slot = %p\n", new_slot); - - while (new_slot && (new_slot->function != (u8) function)) { - new_slot = shpchp_slot_find(busnumber, device, index++); - dbg("new_slot = %p\n", new_slot); - } - if (!new_slot) { - /* Setup slot structure. */ - new_slot = shpchp_slot_create(busnumber); - dbg("new_slot = %p\n", new_slot); - - if (new_slot == NULL) - return(1); - } - - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = (u8) function; - new_slot->is_a_board = 1; - new_slot->switch_save = 0x10; - new_slot->pwr_save = 1; - /* In case of unsupported board */ - new_slot->status = DevError; - new_slot->pci_dev = pci_find_slot(new_slot->bus, - (new_slot->device << 3) | new_slot->function); - dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev); - - for (cloop = 0; cloop < 0x20; cloop++) { - rc = pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(device, function), - cloop << 2, - (u32 *) &(new_slot->config_space [cloop])); - /* dbg("new_slot->config_space[%x] = %x\n", - cloop, new_slot->config_space[cloop]); */ - if (rc) - return rc; - } - - function++; - - stop_it = 0; - - /* this loop skips to the next present function - * reading in Class Code and Header type. - */ - - while ((function < max_functions)&&(!stop_it)) { - rc = pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(device, function), - PCI_VENDOR_ID, &ID); - - if (ID == 0xFFFFFFFF) { /* nothing there. */ - function++; - dbg("Nothing there\n"); - } else { /* Something there */ - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - 0x0B, &class_code); - if (rc) - return rc; - - rc = pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(device, function), - PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; - - dbg("class_code = %x, header_type = %x\n", - class_code, header_type); - stop_it++; - } - } - - } while (function < max_functions); - /* End of IF (device in slot?) */ - } else if (is_hot_plug) { - /* Setup slot structure with entry for empty slot */ - new_slot = shpchp_slot_create(busnumber); - - if (new_slot == NULL) { - return(1); - } - dbg("new_slot = %p\n", new_slot); - - new_slot->bus = (u8) busnumber; - new_slot->device = (u8) device; - new_slot->function = 0; - new_slot->is_a_board = 0; - new_slot->presence_save = 0; - new_slot->switch_save = 0; - } - } /* End of FOR loop */ - - return(0); -} - - -/* - * shpchp_save_slot_config - * - * Saves configuration info for all PCI devices in a given slot - * including subordinate busses. - * - * returns 0 if success - */ -int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot) -{ - int rc; - u8 class_code; - u8 header_type; - u32 ID; - u8 secondary_bus; - int sub_bus; - int max_functions; - int function; - int cloop = 0; - int stop_it; - struct pci_bus lpci_bus, *pci_bus; - memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus)); - pci_bus = &lpci_bus; - pci_bus->number = new_slot->bus; - - ID = 0xFFFFFFFF; - - pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0), - PCI_VENDOR_ID, &ID); - - if (ID != 0xFFFFFFFF) { /* device in slot */ - pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0), - 0x0B, &class_code); - - pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0), - PCI_HEADER_TYPE, &header_type); - - if (header_type & 0x80) /* Multi-function device */ - max_functions = 8; - else - max_functions = 1; - - function = 0; - - do { - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */ - /* Recurse the subordinate bus */ - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_SECONDARY_BUS, &secondary_bus); - - sub_bus = (int) secondary_bus; - - /* Save the config headers for the secondary bus. */ - rc = shpchp_save_config(ctrl, sub_bus, 0, 0); - - if (rc) - return rc; - - } /* End of IF */ - - new_slot->status = 0; - - for (cloop = 0; cloop < 0x20; cloop++) { - pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(new_slot->device, function), - cloop << 2, - (u32 *) &(new_slot->config_space [cloop])); - } - - function++; - - stop_it = 0; - - /* this loop skips to the next present function - * reading in the Class Code and the Header type. - */ - - while ((function < max_functions) && (!stop_it)) { - pci_bus_read_config_dword(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_VENDOR_ID, &ID); - - if (ID == 0xFFFFFFFF) { /* nothing there. */ - function++; - } else { /* Something there */ - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - 0x0B, &class_code); - - pci_bus_read_config_byte(pci_bus, - PCI_DEVFN(new_slot->device, function), - PCI_HEADER_TYPE, &header_type); - - stop_it++; - } - } - - } while (function < max_functions); - } /* End of IF (device in slot?) */ - else { - return 2; - } - - return 0; -} - -- GitLab From 2178bfad9ccb0cbeb79599dd1dc349dd4567aa49 Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:41 -0700 Subject: [PATCH 0733/1519] [PATCH] shpchp: remove redundant data structures State information is currently stored in per-slot as well as per-pci-function data structures in shpchp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 35 +-- drivers/pci/hotplug/shpchp_core.c | 20 -- drivers/pci/hotplug/shpchp_ctrl.c | 405 +++--------------------------- drivers/pci/hotplug/shpchp_pci.c | 27 +- 4 files changed, 63 insertions(+), 424 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 5e99260987e8..052c11f14a79 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -52,34 +52,18 @@ extern int shpchp_debug; #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg) -struct pci_func { - struct pci_func *next; - u8 bus; - u8 device; - u8 function; - u8 is_a_board; - u16 status; - u8 configured; - u8 switch_save; - u8 presence_save; - u8 pwr_save; - struct pci_dev* pci_dev; -}; - #define SLOT_MAGIC 0x67267321 struct slot { u32 magic; struct slot *next; u8 bus; u8 device; + u16 status; u32 number; u8 is_a_board; - u8 configured; u8 state; - u8 switch_save; u8 presence_save; - u32 capabilities; - u16 reserved2; + u8 pwr_save; struct timer_list task_event; u8 hp_slot; struct controller *ctrl; @@ -106,19 +90,14 @@ struct controller { struct hpc_ops *hpc_ops; wait_queue_head_t queue; /* sleep & wake process */ u8 next_event; - u8 seg; u8 bus; u8 device; u8 function; - u8 rev; u8 slot_device_offset; u8 add_support; enum pci_bus_speed speed; u32 first_slot; /* First physical slot number */ u8 slot_bus; /* Bus where the slots handled by this controller sit */ - u8 push_flag; - u16 ctlrcap; - u16 vendor_id; }; struct hotplug_params { @@ -169,13 +148,9 @@ struct hotplug_params { * error Messages */ #define msg_initialization_err "Initialization failure, error=%d\n" -#define msg_HPC_rev_error "Unsupported revision of the PCI hot plug controller found.\n" -#define msg_HPC_non_shpc "The PCI hot plug controller is not supported by this driver.\n" -#define msg_HPC_not_supported "This system is not supported by this version of shpcphd mdoule. Upgrade to a newer version of shpchpd\n" #define msg_button_on "PCI slot #%d - powering on due to button press.\n" #define msg_button_off "PCI slot #%d - powering off due to button press.\n" #define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n" -#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n" /* sysfs functions for the hotplug controller info */ extern void shpchp_create_ctrl_files (struct controller *ctrl); @@ -183,8 +158,6 @@ extern void shpchp_create_ctrl_files (struct controller *ctrl); /* controller functions */ extern int shpchp_event_start_thread(void); extern void shpchp_event_stop_thread(void); -extern struct pci_func *shpchp_slot_create(unsigned char busnumber); -extern struct pci_func *shpchp_slot_find(unsigned char bus, unsigned char device, unsigned char index); extern int shpchp_enable_slot(struct slot *slot); extern int shpchp_disable_slot(struct slot *slot); @@ -195,9 +168,8 @@ extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id); /* pci functions */ extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num); -extern int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot); extern int shpchp_configure_device(struct slot *p_slot); -extern int shpchp_unconfigure_device(struct pci_func* func); +extern int shpchp_unconfigure_device(struct slot *p_slot); extern void get_hp_hw_control_from_firmware(struct pci_dev *dev); extern void get_hp_params_from_firmware(struct pci_dev *dev, struct hotplug_params *hpp); @@ -207,7 +179,6 @@ extern int shpchprm_get_physical_slot_number(struct controller *ctrl, /* Global variables */ extern struct controller *shpchp_ctrl_list; -extern struct pci_func *shpchp_slot_list[256]; struct ctrl_reg { volatile u32 base_offset; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 5d4fc28969d0..b54edccbf2cc 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -45,7 +45,6 @@ int shpchp_debug; int shpchp_poll_mode; int shpchp_poll_time; struct controller *shpchp_ctrl_list; /* = NULL */ -struct pci_func *shpchp_slot_list[256]; #define DRIVER_VERSION "0.4" #define DRIVER_AUTHOR "Dan Zink , Greg Kroah-Hartman , Dely Sy " @@ -475,7 +474,6 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) static int shpc_start_thread(void) { - int loop; int retval = 0; dbg("Initialize + Start the notification/polling mechanism \n"); @@ -486,20 +484,11 @@ static int shpc_start_thread(void) return retval; } - dbg("Initialize slot lists\n"); - /* One slot list for each bus in the system */ - for (loop = 0; loop < 256; loop++) { - shpchp_slot_list[loop] = NULL; - } - return retval; } static void __exit unload_shpchpd(void) { - struct pci_func *next; - struct pci_func *TempSlot; - int loop; struct controller *ctrl; struct controller *tctrl; @@ -519,15 +508,6 @@ static void __exit unload_shpchpd(void) kfree(tctrl); } - for (loop = 0; loop < 256; loop++) { - next = shpchp_slot_list[loop]; - while (next != NULL) { - TempSlot = next; - next = next->next; - kfree(TempSlot); - } - } - /* Stop the notification mechanism */ shpchp_event_stop_thread(); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index c55103f3cebd..b6fde3565e55 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -54,19 +54,16 @@ u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; u8 getstatus; - struct pci_func *func; struct event_info *taskInfo; /* Attention Button Change */ dbg("shpchp: Attention button interrupt received.\n"); - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread what to do */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); ctrl->next_event = (ctrl->next_event + 1) % 10; @@ -111,14 +108,11 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; u8 getstatus; - struct pci_func *func; struct event_info *taskInfo; /* Switch Change */ dbg("shpchp: Switch interrupt received.\n"); - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ @@ -128,19 +122,18 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id) rc++; p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); dbg("%s: Card present %x Power status %x\n", __FUNCTION__, - func->presence_save, func->pwr_save); + p_slot->presence_save, p_slot->pwr_save); if (getstatus) { /* * Switch opened */ info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->switch_save = 0; taskInfo->event_type = INT_SWITCH_OPEN; - if (func->pwr_save && func->presence_save) { + if (p_slot->pwr_save && p_slot->presence_save) { taskInfo->event_type = INT_POWER_FAULT; err("Surprise Removal of card\n"); } @@ -149,7 +142,6 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id) * Switch closed */ info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->switch_save = 0x10; taskInfo->event_type = INT_SWITCH_CLOSE; } @@ -165,14 +157,11 @@ u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; /*u8 temp_byte;*/ - struct pci_func *func; struct event_info *taskInfo; /* Presence Change */ dbg("shpchp: Presence/Notify input change.\n"); - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ @@ -186,8 +175,8 @@ u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id) /* * Save the presence state */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); - if (func->presence_save) { + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + if (p_slot->presence_save) { /* * Card Present */ @@ -212,14 +201,11 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) struct controller *ctrl = (struct controller *) inst_id; struct slot *p_slot; u8 rc = 0; - struct pci_func *func; struct event_info *taskInfo; /* Power fault */ dbg("shpchp: Power fault interrupt received.\n"); - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ @@ -235,7 +221,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) * Power fault Cleared */ info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->status = 0x00; + p_slot->status = 0x00; taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { /* @@ -244,7 +230,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); taskInfo->event_type = INT_POWER_FAULT; /* set power fault status for this board */ - func->status = 0xFF; + p_slot->status = 0xFF; info("power fault bit %x set\n", hp_slot); } if (rc) @@ -253,179 +239,6 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) return rc; } -/** - * shpchp_slot_create - Creates a node and adds it to the proper bus. - * @busnumber - bus where new node is to be located - * - * Returns pointer to the new node or NULL if unsuccessful - */ -struct pci_func *shpchp_slot_create(u8 busnumber) -{ - struct pci_func *new_slot; - struct pci_func *next; - - new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL); - - if (new_slot == NULL) { - return(new_slot); - } - - memset(new_slot, 0, sizeof(struct pci_func)); - - new_slot->next = NULL; - new_slot->configured = 1; - - if (shpchp_slot_list[busnumber] == NULL) { - shpchp_slot_list[busnumber] = new_slot; - } else { - next = shpchp_slot_list[busnumber]; - while (next->next != NULL) - next = next->next; - next->next = new_slot; - } - return(new_slot); -} - - -/* - * slot_remove - Removes a node from the linked list of slots. - * @old_slot: slot to remove - * - * Returns 0 if successful, !0 otherwise. - */ -static int slot_remove(struct pci_func * old_slot) -{ - struct pci_func *next; - - if (old_slot == NULL) - return(1); - - next = shpchp_slot_list[old_slot->bus]; - - if (next == NULL) { - return(1); - } - - if (next == old_slot) { - shpchp_slot_list[old_slot->bus] = old_slot->next; - kfree(old_slot); - return(0); - } - - while ((next->next != old_slot) && (next->next != NULL)) { - next = next->next; - } - - if (next->next == old_slot) { - next->next = old_slot->next; - kfree(old_slot); - return(0); - } else - return(2); -} - - -/** - * bridge_slot_remove - Removes a node from the linked list of slots. - * @bridge: bridge to remove - * @secondaryBus: secondary PCI bus number for bridge being removed - * @subordinateBus: subordinate PCI bus number for bridge being removed - * - * Returns 0 if successful, !0 otherwise. - */ -static int bridge_slot_remove(struct pci_func *bridge, u8 secondaryBus, - u8 subordinateBus) -{ - u8 tempBus; - struct pci_func *next; - - if (bridge == NULL) - return(1); - - for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { - next = shpchp_slot_list[tempBus]; - - while (!slot_remove(next)) { - next = shpchp_slot_list[tempBus]; - } - } - - next = shpchp_slot_list[bridge->bus]; - - if (next == NULL) { - return(1); - } - - if (next == bridge) { - shpchp_slot_list[bridge->bus] = bridge->next; - kfree(bridge); - return(0); - } - - while ((next->next != bridge) && (next->next != NULL)) { - next = next->next; - } - - if (next->next == bridge) { - next->next = bridge->next; - kfree(bridge); - return(0); - } else - return(2); -} - - -/** - * shpchp_slot_find - Looks for a node by bus, and device, multiple functions accessed - * @bus: bus to find - * @device: device to find - * @index: is 0 for first function found, 1 for the second... - * - * Returns pointer to the node if successful, %NULL otherwise. - */ -struct pci_func *shpchp_slot_find(u8 bus, u8 device, u8 index) -{ - int found = -1; - struct pci_func *func; - - func = shpchp_slot_list[bus]; - - if ((func == NULL) || ((func->device == device) && (index == 0))) - return(func); - - if (func->device == device) - found++; - - while (func->next != NULL) { - func = func->next; - - if (func->device == device) - found++; - - if (found == index) - return(func); - } - - return(NULL); -} - -static int is_bridge(struct pci_func *func, struct controller *ctrl) -{ - u8 hdr_type; - struct pci_bus *bus = ctrl->pci_dev->subordinate; - - /* - * Note: device may have just been hot-added and not yet scanned - * by the pci core, so its pci_dev structure may not exist yet - */ - pci_bus_read_config_byte(bus, PCI_DEVFN(func->device, func->function), - PCI_HEADER_TYPE, &hdr_type); - if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) - return 1; - else - return 0; -} - /* The following routines constitute the bulk of the hotplug controller logic */ @@ -495,19 +308,20 @@ enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp) * Configures board * */ -static u32 board_added(struct pci_func * func, struct controller * ctrl) +static u32 board_added(struct slot *p_slot) { u8 hp_slot; u8 slots_not_empty = 0; u32 rc = 0; - struct slot *p_slot; enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed; u8 pi, mode; + struct controller *ctrl = p_slot->ctrl; - p_slot = shpchp_find_slot(ctrl, func->device); - hp_slot = func->device - ctrl->slot_device_offset; + hp_slot = p_slot->device - ctrl->slot_device_offset; - dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot); + dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", + __FUNCTION__, p_slot->device, + ctrl->slot_device_offset, hp_slot); /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -699,13 +513,13 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) wait_for_ctrl_irq (ctrl); dbg("%s: after long_delay\n", __FUNCTION__); - dbg("%s: func status = %x\n", __FUNCTION__, func->status); + dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); /* Check for a power fault */ - if (func->status == 0xFF) { + if (p_slot->status == 0xFF) { /* power fault occurred, but it was benign */ dbg("%s: power fault\n", __FUNCTION__); rc = POWER_FAILURE; - func->status = 0; + p_slot->status = 0; goto err_exit; } @@ -715,10 +529,9 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) goto err_exit; } - func->status = 0; - func->switch_save = 0x10; - func->is_a_board = 0x01; - func->pwr_save = 1; + p_slot->status = 0; + p_slot->is_a_board = 0x01; + p_slot->pwr_save = 1; /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -767,38 +580,23 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) * remove_board - Turns off slot and LED's * */ -static u32 remove_board(struct pci_func *func, struct controller *ctrl) +static u32 remove_board(struct slot *p_slot) { - u8 device; + struct controller *ctrl = p_slot->ctrl; u8 hp_slot; u32 rc; - struct slot *p_slot; - u8 secondary = 0, subordinate = 0; - int remove_bridge; - - if (func == NULL) - return(1); - - if ((remove_bridge = is_bridge(func, ctrl))) { - /* Stash away bus information before we destroy it */ - secondary = func->pci_dev->subordinate->secondary; - subordinate = func->pci_dev->subordinate->subordinate; - } - if (shpchp_unconfigure_device(func)) + if (shpchp_unconfigure_device(p_slot)) return(1); - device = func->device; - - hp_slot = func->device - ctrl->slot_device_offset; + hp_slot = p_slot->device - ctrl->slot_device_offset; p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); /* Change status to shutdown */ - if (func->is_a_board) - func->status = 0x01; - func->configured = 0; + if (p_slot->is_a_board) + p_slot->status = 0x01; /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -835,36 +633,8 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) /* Done with exclusive hardware access */ up(&ctrl->crit_sect); - if (ctrl->add_support) { - while (func) { - if (remove_bridge) { - dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, - func->device, func->function); - bridge_slot_remove(func, secondary, - subordinate); - } else - dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, - func->device, func->function); - slot_remove(func); - - func = shpchp_slot_find(ctrl->slot_bus, device, 0); - } - - /* Setup slot structure with entry for empty slot */ - func = shpchp_slot_create(ctrl->slot_bus); - - if (func == NULL) { - return(1); - } - - func->bus = ctrl->slot_bus; - func->device = device; - func->function = 0; - func->configured = 0; - func->switch_save = 0x10; - func->pwr_save = 0; - func->is_a_board = 0; - } + p_slot->pwr_save = 0; + p_slot->is_a_board = 0; return 0; } @@ -1006,7 +776,6 @@ static void interrupt_event_handler(struct controller *ctrl) { int loop = 0; int change = 1; - struct pci_func *func; u8 hp_slot; u8 getstatus; struct slot *p_slot; @@ -1021,11 +790,10 @@ static void interrupt_event_handler(struct controller *ctrl) ctrl->event_queue[loop].event_type); hp_slot = ctrl->event_queue[loop].hp_slot; - func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - dbg("%s: hp_slot %d, func %p, p_slot %p\n", __FUNCTION__, hp_slot, func, p_slot); + dbg("%s: hp_slot %d, p_slot %p\n", + __FUNCTION__, hp_slot, p_slot); if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { dbg("%s: button cancel\n", __FUNCTION__); @@ -1147,13 +915,6 @@ int shpchp_enable_slot (struct slot *p_slot) { u8 getstatus = 0; int rc; - struct pci_func *func; - - func = shpchp_slot_find(p_slot->bus, p_slot->device, 0); - if (!func) { - dbg("%s: Error! slot NULL\n", __FUNCTION__); - return -ENODEV; - } /* Check to see if (latch closed, card present, power off) */ down(&p_slot->ctrl->crit_sect); @@ -1177,75 +938,35 @@ int shpchp_enable_slot (struct slot *p_slot) } up(&p_slot->ctrl->crit_sect); - slot_remove(func); - - func = shpchp_slot_create(p_slot->bus); - if (func == NULL) - return -ENOMEM; - - func->bus = p_slot->bus; - func->device = p_slot->device; - func->function = 0; - func->configured = 0; - func->is_a_board = 1; + p_slot->is_a_board = 1; /* We have to save the presence info for these slots */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); - p_slot->hpc_ops->get_power_status(p_slot, &(func->pwr_save)); - dbg("%s: func->pwr_save %x\n", __FUNCTION__, func->pwr_save); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save)); + dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - func->switch_save = !getstatus? 0x10:0; - rc = board_added(func, p_slot->ctrl); + rc = board_added(p_slot); if (rc) { - if (is_bridge(func, p_slot->ctrl)) { - u8 secondary = func->pci_dev->subordinate->secondary; - u8 subordinate = - func->pci_dev->subordinate->subordinate; - bridge_slot_remove(func, secondary, subordinate); - } else - slot_remove(func); - - /* Setup slot structure with entry for empty slot */ - func = shpchp_slot_create(p_slot->bus); - if (func == NULL) - return -ENOMEM; /* Out of memory */ - - func->bus = p_slot->bus; - func->device = p_slot->device; - func->function = 0; - func->configured = 0; - func->is_a_board = 1; - - /* We have to save the presence info for these slots */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); + p_slot->hpc_ops->get_adapter_status(p_slot, + &(p_slot->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - func->switch_save = !getstatus? 0x10:0; } - if (p_slot) - update_slot_info(p_slot); - + update_slot_info(p_slot); return rc; } int shpchp_disable_slot (struct slot *p_slot) { - u8 class_code, header_type, BCR; - u8 index = 0; u8 getstatus = 0; u32 rc = 0; int ret = 0; - unsigned int devfn; - struct pci_bus *pci_bus; - struct pci_func *func; if (!p_slot->ctrl) return -ENODEV; - pci_bus = p_slot->ctrl->pci_dev->subordinate; - /* Check to see if (latch closed, card present, power on) */ down(&p_slot->ctrl->crit_sect); @@ -1269,54 +990,8 @@ int shpchp_disable_slot (struct slot *p_slot) } up(&p_slot->ctrl->crit_sect); - func = shpchp_slot_find(p_slot->bus, p_slot->device, index++); - - /* Make sure there are no video controllers here - * for all func of p_slot - */ - while (func && !rc) { - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - /* Check the Class Code */ - rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - if (rc) - return -ENODEV; - - if (class_code == PCI_BASE_CLASS_DISPLAY) { - /* Display/Video adapter (not supported) */ - rc = REMOVE_NOT_SUPPORTED; - } else { - /* See if it's a bridge */ - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if (rc) - return -ENODEV; - - /* If it's a bridge, check the VGA Enable bit */ - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR); - if (rc) - return -ENODEV; - - /* If the VGA Enable bit is set, remove isn't supported */ - if (BCR & PCI_BRIDGE_CTL_VGA) { - rc = REMOVE_NOT_SUPPORTED; - } - } - } - - func = shpchp_slot_find(p_slot->bus, p_slot->device, index++); - } - - func = shpchp_slot_find(p_slot->bus, p_slot->device, 0); - if ((func != NULL) && !rc) { - rc = remove_board(func, p_slot->ctrl); - } else if (!rc) - rc = -ENODEV; - - if (p_slot) - update_slot_info(p_slot); - + rc = remove_board(p_slot); + update_slot_info(p_slot); return rc; } diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index f51a97d7611f..8f0a1667f2e6 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -148,20 +148,33 @@ int shpchp_configure_device(struct slot *p_slot) return 0; } -int shpchp_unconfigure_device(struct pci_func* func) +int shpchp_unconfigure_device(struct slot *p_slot) { int rc = 0; int j; + u8 bctl = 0; - dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus, - func->device, func->function); + dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus, p_slot->device); for (j=0; j<8 ; j++) { - struct pci_dev* temp = pci_find_slot(func->bus, - (func->device << 3) | j); - if (temp) { - pci_remove_bus_device(temp); + struct pci_dev* temp = pci_find_slot(p_slot->bus, + (p_slot->device << 3) | j); + if (!temp) + continue; + if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) { + err("Cannot remove display device %s\n", + pci_name(temp)); + continue; + } + if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl); + if (bctl & PCI_BRIDGE_CTL_VGA) { + err("Cannot remove display device %s\n", + pci_name(temp)); + continue; + } } + pci_remove_bus_device(temp); } return rc; } -- GitLab From ee138334d5eb5ca662b2d69228420c1ccc051e0e Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:42 -0700 Subject: [PATCH 0734/1519] [PATCH] shpchp: miscellaneous cleanups Remove un-necessary header includes, remove dead code, remove some type casts, receive function return in the correct data type... Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 14 +-- drivers/pci/hotplug/shpchp_core.c | 12 +-- drivers/pci/hotplug/shpchp_ctrl.c | 31 +++--- drivers/pci/hotplug/shpchp_hpc.c | 126 ++++++------------------- drivers/pci/hotplug/shpchp_pci.c | 4 - drivers/pci/hotplug/shpchp_sysfs.c | 3 - drivers/pci/hotplug/shpchprm_acpi.c | 6 -- drivers/pci/hotplug/shpchprm_legacy.c | 4 - drivers/pci/hotplug/shpchprm_nonacpi.c | 3 - 9 files changed, 46 insertions(+), 157 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 052c11f14a79..ade8ec145e1e 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -32,8 +32,6 @@ #include #include #include -#include -#include #include "pci_hotplug.h" #if !defined(MODULE) @@ -80,7 +78,7 @@ struct event_info { struct controller { struct controller *next; struct semaphore crit_sect; /* critical section semaphore */ - void * hpc_ctlr_handle; /* HPC controller handle */ + struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */ int num_slots; /* Number of slots on ctlr */ int slot_num_inc; /* 1 or -1 */ struct pci_dev *pci_dev; @@ -234,7 +232,7 @@ enum ctrl_offsets { SLOT11 = offsetof(struct ctrl_reg, slot11), SLOT12 = offsetof(struct ctrl_reg, slot12), }; -typedef u8(*php_intr_callback_t) (unsigned int change_id, void *instance_id); +typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id); struct php_ctlr_state_s { struct php_ctlr_state_s *pnext; struct pci_dev *pci_dev; @@ -347,11 +345,7 @@ enum php_ctlr_type { ACPI }; -int shpc_init( struct controller *ctrl, struct pci_dev *pdev, - php_intr_callback_t attention_button_callback, - php_intr_callback_t switch_change_callback, - php_intr_callback_t presence_change_callback, - php_intr_callback_t power_fault_callback); +int shpc_init( struct controller *ctrl, struct pci_dev *pdev); int shpc_get_ctlr_slot_config( struct controller *ctrl, int *num_ctlr_slots, @@ -364,8 +358,6 @@ struct hpc_ops { int (*power_on_slot ) (struct slot *slot); int (*slot_enable ) (struct slot *slot); int (*slot_disable ) (struct slot *slot); - int (*enable_all_slots) (struct slot *slot); - int (*pwr_on_all_slots) (struct slot *slot); int (*set_bus_speed_mode) (struct slot *slot, enum pci_bus_speed speed); int (*get_power_status) (struct slot *slot, u8 *status); int (*get_attention_status) (struct slot *slot, u8 *status); diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index b54edccbf2cc..28ed2dc9388a 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -27,17 +27,11 @@ * */ -#include #include #include #include #include -#include -#include -#include #include -#include -#include #include "shpchp.h" /* Global variables */ @@ -381,11 +375,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dbg("DRV_thread pid = %d\n", current->pid); - rc = shpc_init(ctrl, pdev, - (php_intr_callback_t) shpchp_handle_attention_button, - (php_intr_callback_t) shpchp_handle_switch_change, - (php_intr_callback_t) shpchp_handle_presence_change, - (php_intr_callback_t) shpchp_handle_power_fault); + rc = shpc_init(ctrl, pdev); if (rc) { dbg("%s: controller initialization failed\n", SHPC_MODULE_NAME); goto err_out_free_ctrl; diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index b6fde3565e55..8541180781e1 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -27,15 +27,9 @@ * */ -#include #include #include #include -#include -#include -#include -#include -#include #include #include #include "../pci.h" @@ -242,9 +236,10 @@ u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) /* The following routines constitute the bulk of the hotplug controller logic */ -static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum pci_bus_speed speed) +static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, + enum pci_bus_speed speed) { - u32 rc = 0; + int rc = 0; dbg("%s: change to speed %d\n", __FUNCTION__, speed); down(&ctrl->crit_sect); @@ -266,10 +261,11 @@ static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum p return rc; } -static u32 fix_bus_speed(struct controller *ctrl, struct slot *pslot, u8 flag, -enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp) +static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, + u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp, + enum pci_bus_speed msp) { - u32 rc = 0; + int rc = 0; if (flag != 0) { /* Other slots on the same bus are occupied */ if ( asp < bsp ) { @@ -308,11 +304,11 @@ enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp) * Configures board * */ -static u32 board_added(struct slot *p_slot) +static int board_added(struct slot *p_slot) { u8 hp_slot; u8 slots_not_empty = 0; - u32 rc = 0; + int rc = 0; enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed; u8 pi, mode; struct controller *ctrl = p_slot->ctrl; @@ -580,11 +576,11 @@ static u32 board_added(struct slot *p_slot) * remove_board - Turns off slot and LED's * */ -static u32 remove_board(struct slot *p_slot) +static int remove_board(struct slot *p_slot) { struct controller *ctrl = p_slot->ctrl; u8 hp_slot; - u32 rc; + int rc; if (shpchp_unconfigure_device(p_slot)) return(1); @@ -961,7 +957,6 @@ int shpchp_enable_slot (struct slot *p_slot) int shpchp_disable_slot (struct slot *p_slot) { u8 getstatus = 0; - u32 rc = 0; int ret = 0; if (!p_slot->ctrl) @@ -990,8 +985,8 @@ int shpchp_disable_slot (struct slot *p_slot) } up(&p_slot->ctrl->crit_sect); - rc = remove_board(p_slot); + ret = remove_board(p_slot); update_slot_info(p_slot); - return rc; + return ret; } diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index d55a9a7f8d2b..d46a47603386 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -27,17 +27,10 @@ * */ -#include #include #include #include -#include -#include -#include -#include -#include #include -#include #include "shpchp.h" #ifdef DEBUG @@ -282,7 +275,7 @@ static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds) static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u16 cmd_status; int retval = 0; u16 temp_word; @@ -328,7 +321,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) static int hpc_check_cmd_status(struct controller *ctrl) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle; u16 cmd_status; int retval = 0; @@ -368,7 +361,7 @@ static int hpc_check_cmd_status(struct controller *ctrl) static int hpc_get_attention_status(struct slot *slot, u8 *status) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; u8 atten_led_state; @@ -408,7 +401,7 @@ static int hpc_get_attention_status(struct slot *slot, u8 *status) static int hpc_get_power_status(struct slot * slot, u8 *status) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; u8 slot_state; @@ -450,7 +443,7 @@ static int hpc_get_power_status(struct slot * slot, u8 *status) static int hpc_get_latch_status(struct slot *slot, u8 *status) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; @@ -473,7 +466,7 @@ static int hpc_get_latch_status(struct slot *slot, u8 *status) static int hpc_get_adapter_status(struct slot *slot, u8 *status) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; u8 card_state; @@ -496,7 +489,7 @@ static int hpc_get_adapter_status(struct slot *slot, u8 *status) static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; DBG_ENTER_ROUTINE @@ -513,7 +506,7 @@ static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status, sec_bus_status; u8 m66_cap, pcix_cap, pi; @@ -594,7 +587,7 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u16 sec_bus_status; u8 pi; int retval = 0; @@ -623,7 +616,7 @@ static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) static int hpc_query_power_fault(struct slot * slot) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u32 slot_reg; u16 slot_status; u8 pwr_fault_state, status; @@ -647,7 +640,7 @@ static int hpc_query_power_fault(struct slot * slot) static int hpc_set_attention_status(struct slot *slot, u8 value) { - struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd = 0; int rc = 0; @@ -683,7 +676,7 @@ static int hpc_set_attention_status(struct slot *slot, u8 value) static void hpc_set_green_led_on(struct slot *slot) { - struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; if (!slot->ctrl->hpc_ctlr_handle) { @@ -705,7 +698,7 @@ static void hpc_set_green_led_on(struct slot *slot) static void hpc_set_green_led_off(struct slot *slot) { - struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; if (!slot->ctrl->hpc_ctlr_handle) { @@ -727,7 +720,7 @@ static void hpc_set_green_led_off(struct slot *slot) static void hpc_set_green_led_blink(struct slot *slot) { - struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; if (!slot->ctrl->hpc_ctlr_handle) { @@ -754,7 +747,7 @@ int shpc_get_ctlr_slot_config(struct controller *ctrl, int *updown, /* physical_slot_num increament: 1 or -1 */ int *flags) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle; DBG_ENTER_ROUTINE @@ -776,7 +769,7 @@ int shpc_get_ctlr_slot_config(struct controller *ctrl, static void hpc_release_ctlr(struct controller *ctrl) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle; struct php_ctlr_state_s *p, *p_prev; DBG_ENTER_ROUTINE @@ -828,7 +821,7 @@ DBG_LEAVE_ROUTINE static int hpc_power_on_slot(struct slot * slot) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; int retval = 0; @@ -859,7 +852,7 @@ static int hpc_power_on_slot(struct slot * slot) static int hpc_slot_enable(struct slot * slot) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; int retval = 0; @@ -890,7 +883,7 @@ static int hpc_slot_enable(struct slot * slot) static int hpc_slot_disable(struct slot * slot) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; u8 slot_cmd; int retval = 0; @@ -920,51 +913,12 @@ static int hpc_slot_disable(struct slot * slot) return retval; } -static int hpc_enable_all_slots( struct slot *slot ) -{ - int retval = 0; - - DBG_ENTER_ROUTINE - - if (!slot->ctrl->hpc_ctlr_handle) { - err("%s: Invalid HPC controller handle!\n", __FUNCTION__); - return -1; - } - - retval = shpc_write_cmd(slot, 0, SET_ENABLE_ALL); - if (retval) { - err("%s: Write command failed!\n", __FUNCTION__); - return -1; - } - - DBG_LEAVE_ROUTINE - - return retval; -} - -static int hpc_pwr_on_all_slots(struct slot *slot) -{ - int retval = 0; - - DBG_ENTER_ROUTINE - - retval = shpc_write_cmd(slot, 0, SET_PWR_ON_ALL); - - if (retval) { - err("%s: Write command failed!\n", __FUNCTION__); - return -1; - } - - DBG_LEAVE_ROUTINE - return retval; -} - static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) { u8 slot_cmd; u8 pi; int retval = 0; - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; DBG_ENTER_ROUTINE @@ -1184,7 +1138,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; int retval = 0; u8 pi; @@ -1253,7 +1207,7 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) { - struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle; + struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; u16 sec_bus_status; int retval = 0; @@ -1367,8 +1321,6 @@ static struct hpc_ops shpchp_hpc_ops = { .power_on_slot = hpc_power_on_slot, .slot_enable = hpc_slot_enable, .slot_disable = hpc_slot_disable, - .enable_all_slots = hpc_enable_all_slots, - .pwr_on_all_slots = hpc_pwr_on_all_slots, .set_bus_speed_mode = hpc_set_bus_speed_mode, .set_attention_status = hpc_set_attention_status, .get_power_status = hpc_get_power_status, @@ -1391,12 +1343,7 @@ static struct hpc_ops shpchp_hpc_ops = { .check_cmd_status = hpc_check_cmd_status, }; -int shpc_init(struct controller * ctrl, - struct pci_dev * pdev, - php_intr_callback_t attention_button_callback, - php_intr_callback_t switch_change_callback, - php_intr_callback_t presence_change_callback, - php_intr_callback_t power_fault_callback) +int shpc_init(struct controller * ctrl, struct pci_dev * pdev) { struct php_ctlr_state_s *php_ctlr, *p; void *instance_id = ctrl; @@ -1405,7 +1352,6 @@ int shpc_init(struct controller * ctrl, static int first = 1; u32 shpc_cap_offset, shpc_base_offset; u32 tempdword, slot_reg; - u16 vendor_id, device_id; u8 i; DBG_ENTER_ROUTINE @@ -1422,21 +1368,8 @@ int shpc_init(struct controller * ctrl, php_ctlr->pci_dev = pdev; /* save pci_dev in context */ - rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id); - dbg("%s: Vendor ID: %x\n",__FUNCTION__, vendor_id); - if (rc) { - err("%s: unable to read PCI configuration data\n", __FUNCTION__); - goto abort_free_ctlr; - } - - rc = pci_read_config_word(pdev, PCI_DEVICE_ID, &device_id); - dbg("%s: Device ID: %x\n",__FUNCTION__, device_id); - if (rc) { - err("%s: unable to read PCI configuration data\n", __FUNCTION__); - goto abort_free_ctlr; - } - - if ((vendor_id == PCI_VENDOR_ID_AMD) || (device_id == PCI_DEVICE_ID_AMD_GOLAM_7450)) { + if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device == + PCI_DEVICE_ID_AMD_GOLAM_7450)) { shpc_base_offset = 0; /* amd shpc driver doesn't use this; assume 0 */ } else { if ((shpc_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC)) == 0) { @@ -1514,11 +1447,10 @@ int shpc_init(struct controller * ctrl, php_ctlr->irq = pdev->irq; dbg("HPC interrupt = %d\n", php_ctlr->irq); - /* Save interrupt callback info */ - php_ctlr->attention_button_callback = attention_button_callback; - php_ctlr->switch_change_callback = switch_change_callback; - php_ctlr->presence_change_callback = presence_change_callback; - php_ctlr->power_fault_callback = power_fault_callback; + php_ctlr->attention_button_callback = shpchp_handle_attention_button, + php_ctlr->switch_change_callback = shpchp_handle_switch_change; + php_ctlr->presence_change_callback = shpchp_handle_presence_change; + php_ctlr->power_fault_callback = shpchp_handle_power_fault; php_ctlr->callback_instance_id = instance_id; /* Return PCI Controller Info */ diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index 8f0a1667f2e6..b8e95acea3b6 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -27,13 +27,9 @@ * */ -#include #include #include #include -#include -#include -#include #include #include "../pci.h" #include "shpchp.h" diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index ce41719a88f7..807ef66899c7 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -26,12 +26,9 @@ * */ -#include #include #include #include -#include -#include #include #include "shpchp.h" diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index 3be518c7d47a..17145e52223a 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -24,16 +24,10 @@ * */ -#include #include #include #include #include -#include -#include -#include -#include -#include #include #include #include diff --git a/drivers/pci/hotplug/shpchprm_legacy.c b/drivers/pci/hotplug/shpchprm_legacy.c index cfc6092e2afd..ed6c1254bf6f 100644 --- a/drivers/pci/hotplug/shpchprm_legacy.c +++ b/drivers/pci/hotplug/shpchprm_legacy.c @@ -27,15 +27,11 @@ * */ -#include #include #include #include #include -#include -#include #include "shpchp.h" -#include "shpchprm.h" int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { diff --git a/drivers/pci/hotplug/shpchprm_nonacpi.c b/drivers/pci/hotplug/shpchprm_nonacpi.c index f36c188c23eb..d70fe5408417 100644 --- a/drivers/pci/hotplug/shpchprm_nonacpi.c +++ b/drivers/pci/hotplug/shpchprm_nonacpi.c @@ -32,10 +32,7 @@ #include #include #include -#include -#include #include "shpchp.h" -#include "shpchprm.h" int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum) { -- GitLab From 7c8942f993dc069db0e0327a343bbec8a6e96074 Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:43 -0700 Subject: [PATCH 0735/1519] [PATCH] shpchp: reduce debug message verbosity Reduce the number of debug messages generated if shpchp debug is enabled. I tried to restrict this to removing debug messages that are either early-driver-debug type messages, or print information that can be inferred through other debug prints. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 6 ---- drivers/pci/hotplug/shpchp_core.c | 8 ------ drivers/pci/hotplug/shpchp_ctrl.c | 11 -------- drivers/pci/hotplug/shpchp_hpc.c | 47 +++++-------------------------- 4 files changed, 7 insertions(+), 65 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index ade8ec145e1e..dae1543a4e28 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -293,12 +293,9 @@ static inline struct slot *shpchp_find_slot (struct controller *ctrl, u8 device) p_slot = ctrl->slot; - dbg("p_slot = %p\n", p_slot); - while (p_slot && (p_slot->device != device)) { tmp_slot = p_slot; p_slot = p_slot->next; - dbg("In while loop, p_slot = %p\n", p_slot); } if (p_slot == NULL) { err("ERROR: shpchp_find_slot device=0x%x\n", device); @@ -313,8 +310,6 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl) DECLARE_WAITQUEUE(wait, current); int retval = 0; - dbg("%s : start\n",__FUNCTION__); - add_wait_queue(&ctrl->queue, &wait); if (!shpchp_poll_mode) { @@ -328,7 +323,6 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl) if (signal_pending(current)) retval = -EINTR; - dbg("%s : end\n", __FUNCTION__); return retval; } diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 28ed2dc9388a..6a2b4a0193aa 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -105,8 +105,6 @@ static int init_slots(struct controller *ctrl) u32 slot_number, sun; int result = -ENOMEM; - dbg("%s\n",__FUNCTION__); - number_of_slots = ctrl->num_slots; slot_device = ctrl->slot_device_offset; slot_number = ctrl->first_slot; @@ -373,15 +371,12 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } memset(ctrl, 0, sizeof(struct controller)); - dbg("DRV_thread pid = %d\n", current->pid); - rc = shpc_init(ctrl, pdev); if (rc) { dbg("%s: controller initialization failed\n", SHPC_MODULE_NAME); goto err_out_free_ctrl; } - dbg("%s: controller initialization success\n", __FUNCTION__); ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ pci_set_drvdata(pdev, ctrl); @@ -488,8 +483,6 @@ static void __exit unload_shpchpd(void) cleanup_slots(ctrl); kfree (ctrl->pci_bus); - - dbg("%s: calling release_ctlr\n", __FUNCTION__); ctrl->hpc_ops->release_ctlr(ctrl); tctrl = ctrl; @@ -558,7 +551,6 @@ static void __exit shpcd_cleanup(void) dbg("unload_shpchpd()\n"); unload_shpchpd(); - dbg("pci_unregister_driver\n"); pci_unregister_driver(&shpc_driver); info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n"); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 8541180781e1..58619359ad08 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -505,9 +505,7 @@ static int board_added(struct slot *p_slot) up(&ctrl->crit_sect); /* Wait for ~1 second */ - dbg("%s: before long_delay\n", __FUNCTION__); wait_for_ctrl_irq (ctrl); - dbg("%s: after long_delay\n", __FUNCTION__); dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); /* Check for a power fault */ @@ -666,13 +664,11 @@ static void shpchp_pushbutton_thread (unsigned long slot) p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (getstatus) { p_slot->state = POWEROFF_STATE; - dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); shpchp_disable_slot(p_slot); p_slot->state = STATIC_STATE; } else { p_slot->state = POWERON_STATE; - dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); if (shpchp_enable_slot(p_slot)) { /* Wait for exclusive access to hardware */ @@ -734,7 +730,6 @@ int shpchp_event_start_thread (void) err ("Can't start up our event thread\n"); return -1; } - dbg("Our event thread pid = %d\n", pid); return 0; } @@ -742,9 +737,7 @@ int shpchp_event_start_thread (void) void shpchp_event_stop_thread (void) { event_finished = 1; - dbg("event_thread finish command given\n"); up(&event_semaphore); - dbg("wait for event_thread to exit\n"); down(&event_exit); } @@ -776,7 +769,6 @@ static void interrupt_event_handler(struct controller *ctrl) u8 getstatus; struct slot *p_slot; - dbg("%s:\n", __FUNCTION__); while (change) { change = 0; @@ -788,9 +780,6 @@ static void interrupt_event_handler(struct controller *ctrl) p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - dbg("%s: hp_slot %d, p_slot %p\n", - __FUNCTION__, hp_slot, p_slot); - if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { dbg("%s: button cancel\n", __FUNCTION__); del_timer(&p_slot->task_event); diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index d46a47603386..40905a6c8094 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -313,7 +313,6 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) * command. */ writew(temp_word, php_ctlr->creg + CMD); - dbg("%s: temp_word written %x\n", __FUNCTION__, temp_word); DBG_LEAVE_ROUTINE return retval; @@ -789,10 +788,8 @@ static void hpc_release_ctlr(struct controller *ctrl) } } if (php_ctlr->pci_dev) { - dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__); iounmap(php_ctlr->creg); release_mem_region(pci_resource_start(php_ctlr->pci_dev, 0), pci_resource_len(php_ctlr->pci_dev, 0)); - dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__); php_ctlr->pci_dev = NULL; } @@ -1043,18 +1040,13 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) if (!intr_loc) return IRQ_NONE; - dbg("%s: shpc_isr proceeds\n", __FUNCTION__); dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc); if(!shpchp_poll_mode) { /* Mask Global Interrupt Mask - see implementation note on p. 139 */ /* of SHPC spec rev 1.0*/ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - dbg("%s: Before masking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); temp_dword |= 0x00000001; - dbg("%s: After masking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); intr_loc2 = readl(php_ctlr->creg + INTR_LOC); @@ -1068,11 +1060,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) * Detect bit in Controller SERR-INT register */ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - dbg("%s: Before clearing CCIP, temp_dword = %x\n", - __FUNCTION__, temp_dword); temp_dword &= 0xfffeffff; - dbg("%s: After clearing CCIP, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); wake_up_interruptible(&ctrl->queue); } @@ -1080,11 +1068,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) if ((intr_loc = (intr_loc >> 1)) == 0) { /* Unmask Global Interrupt Mask */ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - dbg("%s: 1-Before unmasking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); temp_dword &= 0xfffffffe; - dbg("%s: 1-After unmasking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); return IRQ_NONE; @@ -1094,11 +1078,9 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) /* To find out which slot has interrupt pending */ if ((intr_loc >> hp_slot) & 0x01) { temp_dword = readl(php_ctlr->creg + SLOT1 + (4*hp_slot)); - dbg("%s: Slot %x with intr, temp_dword = %x\n", - __FUNCTION__, hp_slot, temp_dword); + dbg("%s: Slot %x with intr, slot register = %x\n", + __FUNCTION__, hp_slot, temp_dword); temp_byte = (temp_dword >> 16) & 0xFF; - dbg("%s: Slot with intr, temp_byte = %x\n", - __FUNCTION__, temp_byte); if ((php_ctlr->switch_change_callback) && (temp_byte & 0x08)) schedule_flag += php_ctlr->switch_change_callback( hp_slot, php_ctlr->callback_instance_id); @@ -1114,8 +1096,6 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) /* Clear all slot events */ temp_dword = 0xe01f3fff; - dbg("%s: Clearing slot events, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SLOT1 + (4*hp_slot)); intr_loc2 = readl(php_ctlr->creg + INTR_LOC); @@ -1125,11 +1105,7 @@ static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs) if (!shpchp_poll_mode) { /* Unmask Global Interrupt Mask */ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE); - dbg("%s: 2-Before unmasking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); temp_dword &= 0xfffffffe; - dbg("%s: 2-After unmasking global interrupt, temp_dword = %x\n", - __FUNCTION__, temp_dword); writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE); } @@ -1402,7 +1378,8 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) err("%s : pci_read_config_dword failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: offset %d: tempdword %x\n", __FUNCTION__,i, tempdword); + dbg("%s: offset %d: value %x\n", __FUNCTION__,i, + tempdword); } } @@ -1411,13 +1388,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) first = 0; } - dbg("pdev = %p: b:d:f:irq=0x%x:%x:%x:%x\n", pdev, pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn), pdev->irq); - for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++) - if (pci_resource_len(pdev, rc) > 0) - dbg("pci resource[%d] start=0x%lx(len=0x%lx), shpc_base_offset %x\n", rc, - pci_resource_start(pdev, rc), pci_resource_len(pdev, rc), shpc_base_offset); - info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor, pdev->subsystem_device); @@ -1437,7 +1407,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) goto abort_free_ctlr; } dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg); - dbg("%s: physical addr %p\n", __FUNCTION__, (void*)pci_resource_start(pdev, 0)); init_MUTEX(&ctrl->crit_sect); /* Setup wait queue */ @@ -1445,8 +1414,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) /* Find the IRQ */ php_ctlr->irq = pdev->irq; - dbg("HPC interrupt = %d\n", php_ctlr->irq); - php_ctlr->attention_button_callback = shpchp_handle_attention_button, php_ctlr->switch_change_callback = shpchp_handle_switch_change; php_ctlr->presence_change_callback = shpchp_handle_presence_change; @@ -1488,7 +1455,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) if (rc) { info("Can't get msi for the hotplug controller\n"); info("Use INTx for the hotplug controller\n"); - dbg("%s: rc = %x\n", __FUNCTION__, rc); } else php_ctlr->irq = pdev->irq; @@ -1499,8 +1465,10 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) goto abort_free_ctlr; } } + dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __FUNCTION__, + pdev->bus->number, PCI_SLOT(pdev->devfn), + PCI_FUNC(pdev->devfn), pdev->irq); get_hp_hw_control_from_firmware(pdev); - dbg("%s: Before adding HPC to HPC list\n", __FUNCTION__); /* Add this HPC instance into the HPC list */ spin_lock(&list_lock); @@ -1539,7 +1507,6 @@ int shpc_init(struct controller * ctrl, struct pci_dev * pdev) dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword); } - dbg("%s: Leaving shpc_init\n", __FUNCTION__); DBG_LEAVE_ROUTINE return 0; -- GitLab From c2608a111b621d5cf0e4c2876d79e67333ce5341 Mon Sep 17 00:00:00 2001 From: "rajesh.shah@intel.com" Date: Thu, 13 Oct 2005 12:05:44 -0700 Subject: [PATCH 0736/1519] [PATCH] shpchp: fix oops at driver unload At unload time, the shpchp driver does not remove sysfs files it had created in the driver's probe entry point. This patch fixes this problem. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/shpchp.h | 1 + drivers/pci/hotplug/shpchp_core.c | 1 + drivers/pci/hotplug/shpchp_sysfs.c | 5 +++++ 3 files changed, 7 insertions(+) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index dae1543a4e28..abe2cf411e68 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -173,6 +173,7 @@ extern void get_hp_params_from_firmware(struct pci_dev *dev, struct hotplug_params *hpp); extern int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum); +extern void shpchp_remove_ctrl_files(struct controller *ctrl); /* Global variables */ diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 6a2b4a0193aa..63628e01dd43 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -480,6 +480,7 @@ static void __exit unload_shpchpd(void) ctrl = shpchp_ctrl_list; while (ctrl) { + shpchp_remove_ctrl_files(ctrl); cleanup_slots(ctrl); kfree (ctrl->pci_bus); diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c index 807ef66899c7..f5cfbf2c047c 100644 --- a/drivers/pci/hotplug/shpchp_sysfs.c +++ b/drivers/pci/hotplug/shpchp_sysfs.c @@ -89,3 +89,8 @@ void shpchp_create_ctrl_files (struct controller *ctrl) { device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl); } + +void shpchp_remove_ctrl_files(struct controller *ctrl) +{ + device_remove_file(&ctrl->pci_dev->dev, &dev_attr_ctrl); +} -- GitLab From d10211b278c70fbebb83fb9e4ee717ca13f69b2d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 15 Oct 2005 22:02:19 -0700 Subject: [PATCH 0737/1519] [PATCH] PCI: fix edac drivers for radisys 82600 borkage I told you that the pci_ids.h cleanup was a bad idea ;) Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 11fed60a928d..611e48a4e679 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1610,6 +1610,7 @@ #define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 +#define PCI_VENDOR_ID_RADISYS 0x1331 #define PCI_VENDOR_ID_DOMEX 0x134a #define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001 -- GitLab From a1720fdbd0f90e64668a59a304d01c5ba001b450 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Oct 2005 21:31:36 +0100 Subject: [PATCH 0738/1519] [PATCH] PCI: Fixup PCI driver shutdown Add a warning to pci driver registration code so that we know whether we have drivers using the obsolete driver shutdown method. Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci-driver.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 0d0d533894e0..f906f1a8fe6a 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -377,6 +377,10 @@ int pci_register_driver(struct pci_driver *drv) * the pci shutdown function, this test can go away. */ if (!drv->driver.shutdown) drv->driver.shutdown = pci_device_shutdown; + else + printk(KERN_WARNING "Warning: PCI driver %s has a struct " + "device_driver shutdown method, please update!\n", + drv->name); drv->driver.owner = drv->owner; drv->driver.kobj.ktype = &pci_driver_kobj_type; -- GitLab From 5457b6a6013516a73b8f48ec1adb9984b577a5c1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 16 Oct 2005 21:32:46 +0100 Subject: [PATCH 0739/1519] [PATCH] PCI: Convert megaraid to use pci_driver shutdown method Convert megaraid to use pci_driver's shutdown method rather than the generic device_driver shutdown method. Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/megaraid/megaraid_mbox.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index d47be8e0ea3a..c9e743ba09ec 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -76,7 +76,7 @@ static void megaraid_exit(void); static int megaraid_probe_one(struct pci_dev*, const struct pci_device_id *); static void megaraid_detach_one(struct pci_dev *); -static void megaraid_mbox_shutdown(struct device *); +static void megaraid_mbox_shutdown(struct pci_dev *); static int megaraid_io_attach(adapter_t *); static void megaraid_io_detach(adapter_t *); @@ -369,9 +369,7 @@ static struct pci_driver megaraid_pci_driver_g = { .id_table = pci_id_table_g, .probe = megaraid_probe_one, .remove = __devexit_p(megaraid_detach_one), - .driver = { - .shutdown = megaraid_mbox_shutdown, - } + .shutdown = megaraid_mbox_shutdown, }; @@ -673,9 +671,9 @@ megaraid_detach_one(struct pci_dev *pdev) * Shutdown notification, perform flush cache */ static void -megaraid_mbox_shutdown(struct device *device) +megaraid_mbox_shutdown(struct pci_dev *pdev) { - adapter_t *adapter = pci_get_drvdata(to_pci_dev(device)); + adapter_t *adapter = pci_get_drvdata(pdev); static int counter; if (!adapter) { -- GitLab From 8e5dce35221850759671b2847a2e51030f7626bd Mon Sep 17 00:00:00 2001 From: Kristen Accardi Date: Tue, 18 Oct 2005 17:21:40 -0700 Subject: [PATCH 0740/1519] [PATCH] acpiphp: allocate resources for adapters with bridges Allocate resources for adapters with bridges on them. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/acpiphp_glue.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 424e7de181ae..8e21f6ab89a1 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -58,6 +58,9 @@ static LIST_HEAD(bridge_list); static void handle_hotplug_event_bridge (acpi_handle, u32, void *); static void handle_hotplug_event_func (acpi_handle, u32, void *); +static void acpiphp_sanitize_bus(struct pci_bus *bus); +static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus); + /* * initialization & terminatation routines @@ -796,8 +799,13 @@ static int enable_device(struct acpiphp_slot *slot) } } + pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); + acpiphp_sanitize_bus(bus); + pci_enable_bridges(bus); pci_bus_add_devices(bus); + acpiphp_set_hpp_values(DEVICE_ACPI_HANDLE(&bus->self->dev), bus); + acpiphp_configure_ioapics(DEVICE_ACPI_HANDLE(&bus->self->dev)); /* associate pci_dev to our representation */ list_for_each (l, &slot->funcs) { -- GitLab From f05aab8ef653abcbd454739264a9f5cf63f6f9f8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 23 Oct 2005 11:58:19 -0700 Subject: [PATCH 0741/1519] [PATCH] kernel-doc: fix PCI hotplug PCI hotplug.c: does not contain kernel-doc, so don't process it for now. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/kernel-api.tmpl | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index d650ce36485f..4d9b66d8b4db 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -286,7 +286,9 @@ X!Edrivers/pci/search.c --> !Edrivers/pci/msi.c !Edrivers/pci/bus.c -!Edrivers/pci/hotplug.c + !Edrivers/pci/probe.c !Edrivers/pci/rom.c -- GitLab From 8f7020d36374dda9366fee1343f8eacfe8f5e641 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 23 Oct 2005 11:57:38 -0700 Subject: [PATCH 0742/1519] [PATCH] kernel-doc: PCI fixes PCI: add descriptions for missing function parameters. Eliminate all kernel-doc warnings here. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/pci/msi.c | 2 ++ drivers/pci/pci-driver.c | 13 +++++++++---- drivers/pci/pci.c | 7 ++++--- drivers/pci/probe.c | 1 + 4 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index ee8677bda950..a2033552423c 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -575,6 +575,8 @@ static int msi_capability_init(struct pci_dev *dev) /** * msix_capability_init - configure device's MSI-X capability * @dev: pointer to the pci_dev data structure of MSI-X device function + * @entries: pointer to an array of struct msix_entry entries + * @nvec: number of @entries * * Setup the MSI-X capability structure of device function with a * single MSI-X vector. A return of zero indicates the successful setup of diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index f906f1a8fe6a..8972e6a3aac0 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -26,7 +26,10 @@ struct pci_dynid { #ifdef CONFIG_HOTPLUG /** - * store_new_id + * store_new_id - add a new PCI device ID to this driver and re-probe devices + * @driver: target device driver + * @buf: buffer for scanning device ID data + * @count: input size * * Adds a new dynamic pci device ID to this driver, * and causes the driver to probe for all devices again. @@ -194,8 +197,10 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, /** * __pci_device_probe() + * @drv: driver to call to check if it wants the PCI device + * @pci_dev: PCI device being probed * - * returns 0 on success, else error. + * returns 0 on success, else error. * side-effect: pci_dev->driver is set to drv when drv claims pci_dev. */ static int @@ -440,11 +445,11 @@ pci_dev_driver(const struct pci_dev *dev) /** * pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure - * @ids: array of PCI device id structures to search in * @dev: the PCI device structure to match against + * @drv: the device driver to search for matching PCI device id structures * * Used by a driver to check whether a PCI device present in the - * system is in its list of supported devices.Returns the matching + * system is in its list of supported devices. Returns the matching * pci_device_id structure or %NULL if there is no match. */ static int pci_bus_match(struct device *dev, struct device_driver *drv) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 39bdb938521d..61b855c99e39 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -252,6 +252,8 @@ pci_restore_bars(struct pci_dev *dev) pci_update_resource(dev, &dev->resource[i], i); } +int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); + /** * pci_set_power_state - Set the power state of a PCI device * @dev: PCI device to be suspended @@ -266,7 +268,6 @@ pci_restore_bars(struct pci_dev *dev) * -EIO if device does not support PCI PM. * 0 if we can successfully change the power state. */ -int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { @@ -808,8 +809,8 @@ pci_clear_mwi(struct pci_dev *dev) /** * pci_intx - enables/disables PCI INTx for device dev - * @dev: the PCI device to operate on - * @enable: boolean + * @pdev: the PCI device to operate on + * @enable: boolean: whether to enable or disable PCI INTx * * Enables/disables PCI INTx for device dev */ diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 005786416bb5..fce2cb2112d8 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -669,6 +669,7 @@ static void pci_release_dev(struct device *dev) /** * pci_cfg_space_size - get the configuration space size of the PCI device. + * @dev: PCI device * * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices * have 4096 bytes. Even if the device is capable, that doesn't mean we can -- GitLab From 2f028234f2c7f31dc0ff0784e20f14be11f7035c Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Thu, 20 Oct 2005 09:55:32 +1000 Subject: [PATCH 0743/1519] [PATCH] pci_ids: cleanup comments pci_ids.h cleanup: convert // comment to /* comment */ Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman --- include/linux/pci_ids.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 611e48a4e679..7d300f7469e3 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -444,7 +444,7 @@ #define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251 #define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 -#define PCI_VENDOR_ID_COMPEX2 0x101a // pci.ids says "AT&T GIS (NCR)" +#define PCI_VENDOR_ID_COMPEX2 0x101a /* pci.ids says "AT&T GIS (NCR)" */ #define PCI_DEVICE_ID_COMPEX2_100VG 0x0005 #define PCI_VENDOR_ID_WD 0x101c @@ -1158,10 +1158,10 @@ #define PCI_VENDOR_ID_INIT 0x1101 -#define PCI_VENDOR_ID_CREATIVE 0x1102 // duplicate: ECTIVA +#define PCI_VENDOR_ID_CREATIVE 0x1102 /* duplicate: ECTIVA */ #define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002 -#define PCI_VENDOR_ID_ECTIVA 0x1102 // duplicate: CREATIVE +#define PCI_VENDOR_ID_ECTIVA 0x1102 /* duplicate: CREATIVE */ #define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938 #define PCI_VENDOR_ID_TTI 0x1103 @@ -1171,7 +1171,7 @@ #define PCI_DEVICE_ID_TTI_HPT302 0x0006 #define PCI_DEVICE_ID_TTI_HPT371 0x0007 #define PCI_DEVICE_ID_TTI_HPT374 0x0008 -#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 // apparently a 372N variant? +#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 /* apparently a 372N variant? */ #define PCI_VENDOR_ID_VIA 0x1106 #define PCI_DEVICE_ID_VIA_8763_0 0x0198 -- GitLab From f8977d0a9b7ac84cfe700278a2ca64cb33c93a13 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 25 Oct 2005 10:28:42 -0700 Subject: [PATCH 0744/1519] [PATCH] PCI fixup for Toshiba laptops and ohci1394 This is a fix for a bug I see on my Toshiba laptop, where the ohci1394 controller gets initialized improperly. The patch adds two PCI fixups to arch/i386/pci/fixup.c, one that happens early on to cache the value of the PCI_CACHE_LINE_SIZE config register, and another that later restores the value, along with a valid IRQ number and some BAR values. I've tested it on my laptop, and it prevents me from running into what I consider to be a major bug: IRQ 11 is disabled by the IRQ debug code, causing my wireless to break. Thanks to Rob for the original patch to ohci1394.c and Stefan for lots of proofreading (and a last minute bug caught in review!) and additional information collection. I think the DMI system list is correct, but we may need to add some more PCI IDs to the PCI_FIXUP macros over time. Signed-off-by: Jesse Barnes Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/fixup.c | 59 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index 8e8e895e1b5a..330fd2b68075 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -2,6 +2,8 @@ * Exceptions for specific devices. Usually work-arounds for fatal design flaws. */ +#include +#include #include #include #include "pci.h" @@ -384,3 +386,60 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev) } } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); + +/* + * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. + * + * We pretend to bring them out of full D3 state, and restore the proper + * IRQ, PCI cache line size, and BARs, otherwise the device won't function + * properly. In some cases, the device will generate an interrupt on + * the wrong IRQ line, causing any devices sharing the the line it's + * *supposed* to use to be disabled by the kernel's IRQ debug code. + */ +static u16 toshiba_line_size; + +static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = { + { + .ident = "Toshiba PS5 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"), + }, + }, + { + .ident = "Toshiba PSM4 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"), + }, + }, + { } +}; + +static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev) +{ + if (!dmi_check_system(toshiba_ohci1394_dmi_table)) + return; /* only applies to certain Toshibas (so far) */ + + dev->current_state = PCI_D3cold; + pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032, + pci_pre_fixup_toshiba_ohci1394); + +static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) +{ + if (!dmi_check_system(toshiba_ohci1394_dmi_table)) + return; /* only applies to certain Toshibas (so far) */ + + /* Restore config space on Toshiba laptops */ + mdelay(10); + pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); + pci_write_config_word(dev, PCI_INTERRUPT_LINE, dev->irq); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + pci_resource_start(dev, 0)); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, + pci_resource_start(dev, 1)); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032, + pci_post_fixup_toshiba_ohci1394); -- GitLab From a74968f8c3b1166cfe0942901b56165f06ab6f60 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 28 Oct 2005 15:37:23 -0700 Subject: [PATCH 0745/1519] [IB] umad: Fix device lifetime problems Move ib_umad module to using cdev_alloc() and class_device_create() so that we can handle device lifetime properly. Now we can make sure we keep all of our data structures around until the last way to reach them is gone. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 268 +++++++++++++++++------------ 1 file changed, 159 insertions(+), 109 deletions(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 17ec0a19dbc0..9e49816d7282 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -64,18 +64,39 @@ enum { IB_UMAD_MINOR_BASE = 0 }; +/* + * Our lifetime rules for these structs are the following: each time a + * device special file is opened, we look up the corresponding struct + * ib_umad_port by minor in the umad_port[] table while holding the + * port_lock. If this lookup succeeds, we take a reference on the + * ib_umad_port's struct ib_umad_device while still holding the + * port_lock; if the lookup fails, we fail the open(). We drop these + * references in the corresponding close(). + * + * In addition to references coming from open character devices, there + * is one more reference to each ib_umad_device representing the + * module's reference taken when allocating the ib_umad_device in + * ib_umad_add_one(). + * + * When destroying an ib_umad_device, we clear all of its + * ib_umad_ports from umad_port[] while holding port_lock before + * dropping the module's reference to the ib_umad_device. This is + * always safe because any open() calls will either succeed and obtain + * a reference before we clear the umad_port[] entries, or fail after + * we clear the umad_port[] entries. + */ + struct ib_umad_port { - int devnum; - struct cdev dev; - struct class_device class_dev; + struct cdev *dev; + struct class_device *class_dev; - int sm_devnum; - struct cdev sm_dev; - struct class_device sm_class_dev; + struct cdev *sm_dev; + struct class_device *sm_class_dev; struct semaphore sm_sem; struct ib_device *ib_dev; struct ib_umad_device *umad_dev; + int dev_num; u8 port_num; }; @@ -102,13 +123,25 @@ struct ib_umad_packet { struct ib_user_mad mad; }; +static struct class *umad_class; + static const dev_t base_dev = MKDEV(IB_UMAD_MAJOR, IB_UMAD_MINOR_BASE); -static spinlock_t map_lock; + +static DEFINE_SPINLOCK(port_lock); +static struct ib_umad_port *umad_port[IB_UMAD_MAX_PORTS]; static DECLARE_BITMAP(dev_map, IB_UMAD_MAX_PORTS * 2); static void ib_umad_add_one(struct ib_device *device); static void ib_umad_remove_one(struct ib_device *device); +static void ib_umad_release_dev(struct kref *ref) +{ + struct ib_umad_device *dev = + container_of(ref, struct ib_umad_device, ref); + + kfree(dev); +} + static int queue_packet(struct ib_umad_file *file, struct ib_mad_agent *agent, struct ib_umad_packet *packet) @@ -534,13 +567,23 @@ static long ib_umad_ioctl(struct file *filp, unsigned int cmd, static int ib_umad_open(struct inode *inode, struct file *filp) { - struct ib_umad_port *port = - container_of(inode->i_cdev, struct ib_umad_port, dev); + struct ib_umad_port *port; struct ib_umad_file *file; + spin_lock(&port_lock); + port = umad_port[iminor(inode) - IB_UMAD_MINOR_BASE]; + if (port) + kref_get(&port->umad_dev->ref); + spin_unlock(&port_lock); + + if (!port) + return -ENXIO; + file = kzalloc(sizeof *file, GFP_KERNEL); - if (!file) + if (!file) { + kref_put(&port->umad_dev->ref, ib_umad_release_dev); return -ENOMEM; + } spin_lock_init(&file->recv_lock); init_rwsem(&file->agent_mutex); @@ -556,6 +599,7 @@ static int ib_umad_open(struct inode *inode, struct file *filp) static int ib_umad_close(struct inode *inode, struct file *filp) { struct ib_umad_file *file = filp->private_data; + struct ib_umad_device *dev = file->port->umad_dev; struct ib_umad_packet *packet, *tmp; int i; @@ -570,6 +614,8 @@ static int ib_umad_close(struct inode *inode, struct file *filp) kfree(file); + kref_put(&dev->ref, ib_umad_release_dev); + return 0; } @@ -586,30 +632,46 @@ static struct file_operations umad_fops = { static int ib_umad_sm_open(struct inode *inode, struct file *filp) { - struct ib_umad_port *port = - container_of(inode->i_cdev, struct ib_umad_port, sm_dev); + struct ib_umad_port *port; struct ib_port_modify props = { .set_port_cap_mask = IB_PORT_SM }; int ret; + spin_lock(&port_lock); + port = umad_port[iminor(inode) - IB_UMAD_MINOR_BASE - IB_UMAD_MAX_PORTS]; + if (port) + kref_get(&port->umad_dev->ref); + spin_unlock(&port_lock); + + if (!port) + return -ENXIO; + if (filp->f_flags & O_NONBLOCK) { - if (down_trylock(&port->sm_sem)) - return -EAGAIN; + if (down_trylock(&port->sm_sem)) { + ret = -EAGAIN; + goto fail; + } } else { - if (down_interruptible(&port->sm_sem)) - return -ERESTARTSYS; + if (down_interruptible(&port->sm_sem)) { + ret = -ERESTARTSYS; + goto fail; + } } ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props); if (ret) { up(&port->sm_sem); - return ret; + goto fail; } filp->private_data = port; return 0; + +fail: + kref_put(&port->umad_dev->ref, ib_umad_release_dev); + return ret; } static int ib_umad_sm_close(struct inode *inode, struct file *filp) @@ -623,6 +685,8 @@ static int ib_umad_sm_close(struct inode *inode, struct file *filp) ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props); up(&port->sm_sem); + kref_put(&port->umad_dev->ref, ib_umad_release_dev); + return ret; } @@ -642,6 +706,9 @@ static ssize_t show_ibdev(struct class_device *class_dev, char *buf) { struct ib_umad_port *port = class_get_devdata(class_dev); + if (!port) + return -ENODEV; + return sprintf(buf, "%s\n", port->ib_dev->name); } static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL); @@ -650,38 +717,13 @@ static ssize_t show_port(struct class_device *class_dev, char *buf) { struct ib_umad_port *port = class_get_devdata(class_dev); + if (!port) + return -ENODEV; + return sprintf(buf, "%d\n", port->port_num); } static CLASS_DEVICE_ATTR(port, S_IRUGO, show_port, NULL); -static void ib_umad_release_dev(struct kref *ref) -{ - struct ib_umad_device *dev = - container_of(ref, struct ib_umad_device, ref); - - kfree(dev); -} - -static void ib_umad_release_port(struct class_device *class_dev) -{ - struct ib_umad_port *port = class_get_devdata(class_dev); - - if (class_dev == &port->class_dev) { - cdev_del(&port->dev); - clear_bit(port->devnum, dev_map); - } else { - cdev_del(&port->sm_dev); - clear_bit(port->sm_devnum, dev_map); - } - - kref_put(&port->umad_dev->ref, ib_umad_release_dev); -} - -static struct class umad_class = { - .name = "infiniband_mad", - .release = ib_umad_release_port -}; - static ssize_t show_abi_version(struct class *class, char *buf) { return sprintf(buf, "%d\n", IB_USER_MAD_ABI_VERSION); @@ -691,89 +733,102 @@ static CLASS_ATTR(abi_version, S_IRUGO, show_abi_version, NULL); static int ib_umad_init_port(struct ib_device *device, int port_num, struct ib_umad_port *port) { - spin_lock(&map_lock); - port->devnum = find_first_zero_bit(dev_map, IB_UMAD_MAX_PORTS); - if (port->devnum >= IB_UMAD_MAX_PORTS) { - spin_unlock(&map_lock); + spin_lock(&port_lock); + port->dev_num = find_first_zero_bit(dev_map, IB_UMAD_MAX_PORTS); + if (port->dev_num >= IB_UMAD_MAX_PORTS) { + spin_unlock(&port_lock); return -1; } - port->sm_devnum = find_next_zero_bit(dev_map, IB_UMAD_MAX_PORTS * 2, IB_UMAD_MAX_PORTS); - if (port->sm_devnum >= IB_UMAD_MAX_PORTS * 2) { - spin_unlock(&map_lock); - return -1; - } - set_bit(port->devnum, dev_map); - set_bit(port->sm_devnum, dev_map); - spin_unlock(&map_lock); + set_bit(port->dev_num, dev_map); + spin_unlock(&port_lock); port->ib_dev = device; port->port_num = port_num; init_MUTEX(&port->sm_sem); - cdev_init(&port->dev, &umad_fops); - port->dev.owner = THIS_MODULE; - kobject_set_name(&port->dev.kobj, "umad%d", port->devnum); - if (cdev_add(&port->dev, base_dev + port->devnum, 1)) + port->dev = cdev_alloc(); + if (!port->dev) return -1; - - port->class_dev.class = &umad_class; - port->class_dev.dev = device->dma_device; - port->class_dev.devt = port->dev.dev; - - snprintf(port->class_dev.class_id, BUS_ID_SIZE, "umad%d", port->devnum); - - if (class_device_register(&port->class_dev)) + port->dev->owner = THIS_MODULE; + port->dev->ops = &umad_fops; + kobject_set_name(&port->dev->kobj, "umad%d", port->dev_num); + if (cdev_add(port->dev, base_dev + port->dev_num, 1)) goto err_cdev; - class_set_devdata(&port->class_dev, port); - kref_get(&port->umad_dev->ref); + port->class_dev = class_device_create(umad_class, port->dev->dev, + device->dma_device, + "umad%d", port->dev_num); + if (IS_ERR(port->class_dev)) + goto err_cdev; - if (class_device_create_file(&port->class_dev, &class_device_attr_ibdev)) + if (class_device_create_file(port->class_dev, &class_device_attr_ibdev)) goto err_class; - if (class_device_create_file(&port->class_dev, &class_device_attr_port)) + if (class_device_create_file(port->class_dev, &class_device_attr_port)) goto err_class; - cdev_init(&port->sm_dev, &umad_sm_fops); - port->sm_dev.owner = THIS_MODULE; - kobject_set_name(&port->dev.kobj, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS); - if (cdev_add(&port->sm_dev, base_dev + port->sm_devnum, 1)) - return -1; - - port->sm_class_dev.class = &umad_class; - port->sm_class_dev.dev = device->dma_device; - port->sm_class_dev.devt = port->sm_dev.dev; - - snprintf(port->sm_class_dev.class_id, BUS_ID_SIZE, "issm%d", port->sm_devnum - IB_UMAD_MAX_PORTS); + port->sm_dev = cdev_alloc(); + if (!port->sm_dev) + goto err_class; + port->sm_dev->owner = THIS_MODULE; + port->sm_dev->ops = &umad_sm_fops; + kobject_set_name(&port->dev->kobj, "issm%d", port->dev_num); + if (cdev_add(port->sm_dev, base_dev + port->dev_num + IB_UMAD_MAX_PORTS, 1)) + goto err_sm_cdev; - if (class_device_register(&port->sm_class_dev)) + port->sm_class_dev = class_device_create(umad_class, port->sm_dev->dev, + device->dma_device, + "issm%d", port->dev_num); + if (IS_ERR(port->sm_class_dev)) goto err_sm_cdev; - class_set_devdata(&port->sm_class_dev, port); - kref_get(&port->umad_dev->ref); + class_set_devdata(port->class_dev, port); + class_set_devdata(port->sm_class_dev, port); - if (class_device_create_file(&port->sm_class_dev, &class_device_attr_ibdev)) + if (class_device_create_file(port->sm_class_dev, &class_device_attr_ibdev)) goto err_sm_class; - if (class_device_create_file(&port->sm_class_dev, &class_device_attr_port)) + if (class_device_create_file(port->sm_class_dev, &class_device_attr_port)) goto err_sm_class; + spin_lock(&port_lock); + umad_port[port->dev_num] = port; + spin_unlock(&port_lock); + return 0; err_sm_class: - class_device_unregister(&port->sm_class_dev); + class_device_destroy(umad_class, port->sm_dev->dev); err_sm_cdev: - cdev_del(&port->sm_dev); + cdev_del(port->sm_dev); err_class: - class_device_unregister(&port->class_dev); + class_device_destroy(umad_class, port->dev->dev); err_cdev: - cdev_del(&port->dev); - clear_bit(port->devnum, dev_map); + cdev_del(port->dev); + clear_bit(port->dev_num, dev_map); return -1; } +static void ib_umad_kill_port(struct ib_umad_port *port) +{ + class_set_devdata(port->class_dev, NULL); + class_set_devdata(port->sm_class_dev, NULL); + + class_device_destroy(umad_class, port->dev->dev); + class_device_destroy(umad_class, port->sm_dev->dev); + + cdev_del(port->dev); + cdev_del(port->sm_dev); + + spin_lock(&port_lock); + umad_port[port->dev_num] = NULL; + spin_unlock(&port_lock); + + clear_bit(port->dev_num, dev_map); +} + static void ib_umad_add_one(struct ib_device *device) { struct ib_umad_device *umad_dev; @@ -809,10 +864,8 @@ static void ib_umad_add_one(struct ib_device *device) return; err: - while (--i >= s) { - class_device_unregister(&umad_dev->port[i - s].class_dev); - class_device_unregister(&umad_dev->port[i - s].sm_class_dev); - } + while (--i >= s) + ib_umad_kill_port(&umad_dev->port[i]); kref_put(&umad_dev->ref, ib_umad_release_dev); } @@ -825,10 +878,8 @@ static void ib_umad_remove_one(struct ib_device *device) if (!umad_dev) return; - for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i) { - class_device_unregister(&umad_dev->port[i].class_dev); - class_device_unregister(&umad_dev->port[i].sm_class_dev); - } + for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i) + ib_umad_kill_port(&umad_dev->port[i]); kref_put(&umad_dev->ref, ib_umad_release_dev); } @@ -837,8 +888,6 @@ static int __init ib_umad_init(void) { int ret; - spin_lock_init(&map_lock); - ret = register_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2, "infiniband_mad"); if (ret) { @@ -846,13 +895,14 @@ static int __init ib_umad_init(void) goto out; } - ret = class_register(&umad_class); - if (ret) { + umad_class = class_create(THIS_MODULE, "infiniband_mad"); + if (IS_ERR(umad_class)) { + ret = PTR_ERR(umad_class); printk(KERN_ERR "user_mad: couldn't create class infiniband_mad\n"); goto out_chrdev; } - ret = class_create_file(&umad_class, &class_attr_abi_version); + ret = class_create_file(umad_class, &class_attr_abi_version); if (ret) { printk(KERN_ERR "user_mad: couldn't create abi_version attribute\n"); goto out_class; @@ -867,7 +917,7 @@ static int __init ib_umad_init(void) return 0; out_class: - class_unregister(&umad_class); + class_destroy(umad_class); out_chrdev: unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2); @@ -879,7 +929,7 @@ static int __init ib_umad_init(void) static void __exit ib_umad_cleanup(void) { ib_unregister_client(&umad_client); - class_unregister(&umad_class); + class_destroy(umad_class); unregister_chrdev_region(base_dev, IB_UMAD_MAX_PORTS * 2); } -- GitLab From 70a30e16a8a9d22396a4d1e96af86e43594df584 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 28 Oct 2005 15:38:26 -0700 Subject: [PATCH 0746/1519] [IB] uverbs: Fix device lifetime problems Move ib_uverbs module to using cdev_alloc() and class_device_create() so that we can handle device lifetime properly. Now we can make sure we keep all of our data structures around until the last way to reach them is gone. Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs.h | 36 ++++- drivers/infiniband/core/uverbs_cmd.c | 38 +---- drivers/infiniband/core/uverbs_main.c | 203 +++++++++++++++++++------- 3 files changed, 182 insertions(+), 95 deletions(-) diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index 63c8085c0c98..031cdf3c066d 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -39,20 +39,38 @@ #ifndef UVERBS_H #define UVERBS_H -/* Include device.h and fs.h until cdev.h is self-sufficient */ -#include -#include -#include #include #include #include #include +/* + * Our lifetime rules for these structs are the following: + * + * struct ib_uverbs_device: One reference is held by the module and + * released in ib_uverbs_remove_one(). Another reference is taken by + * ib_uverbs_open() each time the character special file is opened, + * and released in ib_uverbs_release_file() when the file is released. + * + * struct ib_uverbs_file: One reference is held by the VFS and + * released when the file is closed. Another reference is taken when + * an asynchronous event queue file is created and released when the + * event file is closed. + * + * struct ib_uverbs_event_file: One reference is held by the VFS and + * released when the file is closed. For asynchronous event files, + * another reference is held by the corresponding main context file + * and released when that file is closed. For completion event files, + * a reference is taken when a CQ is created that uses the file, and + * released when the CQ is destroyed. + */ + struct ib_uverbs_device { + struct kref ref; int devnum; - struct cdev dev; - struct class_device class_dev; + struct cdev *dev; + struct class_device *class_dev; struct ib_device *ib_dev; int num_comp_vectors; }; @@ -115,6 +133,12 @@ struct file *ib_uverbs_alloc_event_file(struct ib_uverbs_file *uverbs_file, void ib_uverbs_release_event_file(struct kref *ref); struct ib_uverbs_event_file *ib_uverbs_lookup_comp_file(int fd); +void ib_uverbs_release_ucq(struct ib_uverbs_file *file, + struct ib_uverbs_event_file *ev_file, + struct ib_ucq_object *uobj); +void ib_uverbs_release_uevent(struct ib_uverbs_file *file, + struct ib_uevent_object *uobj); + void ib_uverbs_comp_handler(struct ib_cq *cq, void *cq_context); void ib_uverbs_cq_event_handler(struct ib_event *event, void *context_ptr); void ib_uverbs_qp_event_handler(struct ib_event *event, void *context_ptr); diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 14583bb6e2c0..8c89abc8c764 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -35,6 +35,7 @@ */ #include +#include #include @@ -114,7 +115,7 @@ ssize_t ib_uverbs_get_context(struct ib_uverbs_file *file, kref_get(&file->async_file->ref); kref_get(&file->ref); - file->ucontext = ucontext; + file->ucontext = ucontext; fd_install(resp.async_fd, filp); @@ -761,7 +762,6 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, struct ib_cq *cq; struct ib_ucq_object *uobj; struct ib_uverbs_event_file *ev_file; - struct ib_uverbs_event *evt, *tmp; u64 user_handle; int ret = -EINVAL; @@ -790,23 +790,7 @@ ssize_t ib_uverbs_destroy_cq(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - if (ev_file) { - spin_lock_irq(&ev_file->lock); - list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) { - list_del(&evt->list); - kfree(evt); - } - spin_unlock_irq(&ev_file->lock); - - kref_put(&ev_file->ref, ib_uverbs_release_event_file); - } - - spin_lock_irq(&file->async_file->lock); - list_for_each_entry_safe(evt, tmp, &uobj->async_list, obj_list) { - list_del(&evt->list); - kfree(evt); - } - spin_unlock_irq(&file->async_file->lock); + ib_uverbs_release_ucq(file, ev_file, uobj); resp.comp_events_reported = uobj->comp_events_reported; resp.async_events_reported = uobj->async_events_reported; @@ -1043,7 +1027,6 @@ ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file, struct ib_uverbs_destroy_qp_resp resp; struct ib_qp *qp; struct ib_uevent_object *uobj; - struct ib_uverbs_event *evt, *tmp; int ret = -EINVAL; if (copy_from_user(&cmd, buf, sizeof cmd)) @@ -1069,12 +1052,7 @@ ssize_t ib_uverbs_destroy_qp(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->async_file->lock); - list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { - list_del(&evt->list); - kfree(evt); - } - spin_unlock_irq(&file->async_file->lock); + ib_uverbs_release_uevent(file, uobj); resp.events_reported = uobj->events_reported; @@ -1741,7 +1719,6 @@ ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file, struct ib_uverbs_destroy_srq_resp resp; struct ib_srq *srq; struct ib_uevent_object *uobj; - struct ib_uverbs_event *evt, *tmp; int ret = -EINVAL; if (copy_from_user(&cmd, buf, sizeof cmd)) @@ -1767,12 +1744,7 @@ ssize_t ib_uverbs_destroy_srq(struct ib_uverbs_file *file, list_del(&uobj->uobject.list); up(&file->mutex); - spin_lock_irq(&file->async_file->lock); - list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { - list_del(&evt->list); - kfree(evt); - } - spin_unlock_irq(&file->async_file->lock); + ib_uverbs_release_uevent(file, uobj); resp.events_reported = uobj->events_reported; diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 251c752a7ae6..ac08d2c93ea1 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -44,6 +44,7 @@ #include #include #include +#include #include @@ -63,6 +64,8 @@ enum { #define IB_UVERBS_BASE_DEV MKDEV(IB_UVERBS_MAJOR, IB_UVERBS_BASE_MINOR) +static struct class *uverbs_class; + DECLARE_MUTEX(ib_uverbs_idr_mutex); DEFINE_IDR(ib_uverbs_pd_idr); DEFINE_IDR(ib_uverbs_mr_idr); @@ -73,6 +76,7 @@ DEFINE_IDR(ib_uverbs_qp_idr); DEFINE_IDR(ib_uverbs_srq_idr); static spinlock_t map_lock; +static struct ib_uverbs_device *dev_table[IB_UVERBS_MAX_DEVICES]; static DECLARE_BITMAP(dev_map, IB_UVERBS_MAX_DEVICES); static ssize_t (*uverbs_cmd_table[])(struct ib_uverbs_file *file, @@ -110,7 +114,54 @@ static struct vfsmount *uverbs_event_mnt; static void ib_uverbs_add_one(struct ib_device *device); static void ib_uverbs_remove_one(struct ib_device *device); -static int ib_dealloc_ucontext(struct ib_ucontext *context) +static void ib_uverbs_release_dev(struct kref *ref) +{ + struct ib_uverbs_device *dev = + container_of(ref, struct ib_uverbs_device, ref); + + kfree(dev); +} + +void ib_uverbs_release_ucq(struct ib_uverbs_file *file, + struct ib_uverbs_event_file *ev_file, + struct ib_ucq_object *uobj) +{ + struct ib_uverbs_event *evt, *tmp; + + if (ev_file) { + spin_lock_irq(&ev_file->lock); + list_for_each_entry_safe(evt, tmp, &uobj->comp_list, obj_list) { + list_del(&evt->list); + kfree(evt); + } + spin_unlock_irq(&ev_file->lock); + + kref_put(&ev_file->ref, ib_uverbs_release_event_file); + } + + spin_lock_irq(&file->async_file->lock); + list_for_each_entry_safe(evt, tmp, &uobj->async_list, obj_list) { + list_del(&evt->list); + kfree(evt); + } + spin_unlock_irq(&file->async_file->lock); +} + +void ib_uverbs_release_uevent(struct ib_uverbs_file *file, + struct ib_uevent_object *uobj) +{ + struct ib_uverbs_event *evt, *tmp; + + spin_lock_irq(&file->async_file->lock); + list_for_each_entry_safe(evt, tmp, &uobj->event_list, obj_list) { + list_del(&evt->list); + kfree(evt); + } + spin_unlock_irq(&file->async_file->lock); +} + +static int ib_uverbs_cleanup_ucontext(struct ib_uverbs_file *file, + struct ib_ucontext *context) { struct ib_uobject *uobj, *tmp; @@ -129,26 +180,36 @@ static int ib_dealloc_ucontext(struct ib_ucontext *context) list_for_each_entry_safe(uobj, tmp, &context->qp_list, list) { struct ib_qp *qp = idr_find(&ib_uverbs_qp_idr, uobj->id); + struct ib_uevent_object *uevent = + container_of(uobj, struct ib_uevent_object, uobject); idr_remove(&ib_uverbs_qp_idr, uobj->id); ib_destroy_qp(qp); list_del(&uobj->list); - kfree(container_of(uobj, struct ib_uevent_object, uobject)); + ib_uverbs_release_uevent(file, uevent); + kfree(uevent); } list_for_each_entry_safe(uobj, tmp, &context->cq_list, list) { struct ib_cq *cq = idr_find(&ib_uverbs_cq_idr, uobj->id); + struct ib_uverbs_event_file *ev_file = cq->cq_context; + struct ib_ucq_object *ucq = + container_of(uobj, struct ib_ucq_object, uobject); idr_remove(&ib_uverbs_cq_idr, uobj->id); ib_destroy_cq(cq); list_del(&uobj->list); - kfree(container_of(uobj, struct ib_ucq_object, uobject)); + ib_uverbs_release_ucq(file, ev_file, ucq); + kfree(ucq); } list_for_each_entry_safe(uobj, tmp, &context->srq_list, list) { struct ib_srq *srq = idr_find(&ib_uverbs_srq_idr, uobj->id); + struct ib_uevent_object *uevent = + container_of(uobj, struct ib_uevent_object, uobject); idr_remove(&ib_uverbs_srq_idr, uobj->id); ib_destroy_srq(srq); list_del(&uobj->list); - kfree(container_of(uobj, struct ib_uevent_object, uobject)); + ib_uverbs_release_uevent(file, uevent); + kfree(uevent); } /* XXX Free MWs */ @@ -187,6 +248,8 @@ static void ib_uverbs_release_file(struct kref *ref) container_of(ref, struct ib_uverbs_file, ref); module_put(file->device->ib_dev->owner); + kref_put(&file->device->ref, ib_uverbs_release_dev); + kfree(file); } @@ -552,36 +615,58 @@ static int ib_uverbs_mmap(struct file *filp, struct vm_area_struct *vma) static int ib_uverbs_open(struct inode *inode, struct file *filp) { - struct ib_uverbs_device *dev = - container_of(inode->i_cdev, struct ib_uverbs_device, dev); + struct ib_uverbs_device *dev; struct ib_uverbs_file *file; + int ret; - if (!try_module_get(dev->ib_dev->owner)) - return -ENODEV; + spin_lock(&map_lock); + dev = dev_table[iminor(inode) - IB_UVERBS_BASE_MINOR]; + if (dev) + kref_get(&dev->ref); + spin_unlock(&map_lock); + + if (!dev) + return -ENXIO; + + if (!try_module_get(dev->ib_dev->owner)) { + ret = -ENODEV; + goto err; + } file = kmalloc(sizeof *file, GFP_KERNEL); if (!file) { - module_put(dev->ib_dev->owner); - return -ENOMEM; + ret = -ENOMEM; + goto err_module; } - file->device = dev; - file->ucontext = NULL; + file->device = dev; + file->ucontext = NULL; + file->async_file = NULL; kref_init(&file->ref); init_MUTEX(&file->mutex); filp->private_data = file; return 0; + +err_module: + module_put(dev->ib_dev->owner); + +err: + kref_put(&dev->ref, ib_uverbs_release_dev); + + return ret; } static int ib_uverbs_close(struct inode *inode, struct file *filp) { struct ib_uverbs_file *file = filp->private_data; - ib_dealloc_ucontext(file->ucontext); + ib_uverbs_cleanup_ucontext(file, file->ucontext); + + if (file->async_file) + kref_put(&file->async_file->ref, ib_uverbs_release_event_file); - kref_put(&file->async_file->ref, ib_uverbs_release_event_file); kref_put(&file->ref, ib_uverbs_release_file); return 0; @@ -610,8 +695,10 @@ static struct ib_client uverbs_client = { static ssize_t show_ibdev(struct class_device *class_dev, char *buf) { - struct ib_uverbs_device *dev = - container_of(class_dev, struct ib_uverbs_device, class_dev); + struct ib_uverbs_device *dev = class_get_devdata(class_dev); + + if (!dev) + return -ENODEV; return sprintf(buf, "%s\n", dev->ib_dev->name); } @@ -619,28 +706,15 @@ static CLASS_DEVICE_ATTR(ibdev, S_IRUGO, show_ibdev, NULL); static ssize_t show_dev_abi_version(struct class_device *class_dev, char *buf) { - struct ib_uverbs_device *dev = - container_of(class_dev, struct ib_uverbs_device, class_dev); + struct ib_uverbs_device *dev = class_get_devdata(class_dev); + + if (!dev) + return -ENODEV; return sprintf(buf, "%d\n", dev->ib_dev->uverbs_abi_ver); } static CLASS_DEVICE_ATTR(abi_version, S_IRUGO, show_dev_abi_version, NULL); -static void ib_uverbs_release_class_dev(struct class_device *class_dev) -{ - struct ib_uverbs_device *dev = - container_of(class_dev, struct ib_uverbs_device, class_dev); - - cdev_del(&dev->dev); - clear_bit(dev->devnum, dev_map); - kfree(dev); -} - -static struct class uverbs_class = { - .name = "infiniband_verbs", - .release = ib_uverbs_release_class_dev -}; - static ssize_t show_abi_version(struct class *class, char *buf) { return sprintf(buf, "%d\n", IB_USER_VERBS_ABI_VERSION); @@ -660,6 +734,8 @@ static void ib_uverbs_add_one(struct ib_device *device) memset(uverbs_dev, 0, sizeof *uverbs_dev); + kref_init(&uverbs_dev->ref); + spin_lock(&map_lock); uverbs_dev->devnum = find_first_zero_bit(dev_map, IB_UVERBS_MAX_DEVICES); if (uverbs_dev->devnum >= IB_UVERBS_MAX_DEVICES) { @@ -672,40 +748,45 @@ static void ib_uverbs_add_one(struct ib_device *device) uverbs_dev->ib_dev = device; uverbs_dev->num_comp_vectors = 1; - if (device->mmap) - cdev_init(&uverbs_dev->dev, &uverbs_mmap_fops); - else - cdev_init(&uverbs_dev->dev, &uverbs_fops); - uverbs_dev->dev.owner = THIS_MODULE; - kobject_set_name(&uverbs_dev->dev.kobj, "uverbs%d", uverbs_dev->devnum); - if (cdev_add(&uverbs_dev->dev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1)) + uverbs_dev->dev = cdev_alloc(); + if (!uverbs_dev->dev) goto err; + uverbs_dev->dev->owner = THIS_MODULE; + uverbs_dev->dev->ops = device->mmap ? &uverbs_mmap_fops : &uverbs_fops; + kobject_set_name(&uverbs_dev->dev->kobj, "uverbs%d", uverbs_dev->devnum); + if (cdev_add(uverbs_dev->dev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1)) + goto err_cdev; - uverbs_dev->class_dev.class = &uverbs_class; - uverbs_dev->class_dev.dev = device->dma_device; - uverbs_dev->class_dev.devt = uverbs_dev->dev.dev; - snprintf(uverbs_dev->class_dev.class_id, BUS_ID_SIZE, "uverbs%d", uverbs_dev->devnum); - if (class_device_register(&uverbs_dev->class_dev)) + uverbs_dev->class_dev = class_device_create(uverbs_class, uverbs_dev->dev->dev, + device->dma_device, + "uverbs%d", uverbs_dev->devnum); + if (IS_ERR(uverbs_dev->class_dev)) goto err_cdev; - if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_ibdev)) + class_set_devdata(uverbs_dev->class_dev, uverbs_dev); + + if (class_device_create_file(uverbs_dev->class_dev, &class_device_attr_ibdev)) goto err_class; - if (class_device_create_file(&uverbs_dev->class_dev, &class_device_attr_abi_version)) + if (class_device_create_file(uverbs_dev->class_dev, &class_device_attr_abi_version)) goto err_class; + spin_lock(&map_lock); + dev_table[uverbs_dev->devnum] = uverbs_dev; + spin_unlock(&map_lock); + ib_set_client_data(device, &uverbs_client, uverbs_dev); return; err_class: - class_device_unregister(&uverbs_dev->class_dev); + class_device_destroy(uverbs_class, uverbs_dev->dev->dev); err_cdev: - cdev_del(&uverbs_dev->dev); + cdev_del(uverbs_dev->dev); clear_bit(uverbs_dev->devnum, dev_map); err: - kfree(uverbs_dev); + kref_put(&uverbs_dev->ref, ib_uverbs_release_dev); return; } @@ -716,7 +797,16 @@ static void ib_uverbs_remove_one(struct ib_device *device) if (!uverbs_dev) return; - class_device_unregister(&uverbs_dev->class_dev); + class_set_devdata(uverbs_dev->class_dev, NULL); + class_device_destroy(uverbs_class, uverbs_dev->dev->dev); + cdev_del(uverbs_dev->dev); + + spin_lock(&map_lock); + dev_table[uverbs_dev->devnum] = NULL; + spin_unlock(&map_lock); + + clear_bit(uverbs_dev->devnum, dev_map); + kref_put(&uverbs_dev->ref, ib_uverbs_release_dev); } static struct super_block *uverbs_event_get_sb(struct file_system_type *fs_type, int flags, @@ -746,13 +836,14 @@ static int __init ib_uverbs_init(void) goto out; } - ret = class_register(&uverbs_class); - if (ret) { + uverbs_class = class_create(THIS_MODULE, "infiniband_verbs"); + if (IS_ERR(uverbs_class)) { + ret = PTR_ERR(uverbs_class); printk(KERN_ERR "user_verbs: couldn't create class infiniband_verbs\n"); goto out_chrdev; } - ret = class_create_file(&uverbs_class, &class_attr_abi_version); + ret = class_create_file(uverbs_class, &class_attr_abi_version); if (ret) { printk(KERN_ERR "user_verbs: couldn't create abi_version attribute\n"); goto out_class; @@ -786,7 +877,7 @@ static int __init ib_uverbs_init(void) unregister_filesystem(&uverbs_event_fs); out_class: - class_unregister(&uverbs_class); + class_destroy(uverbs_class); out_chrdev: unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES); @@ -800,7 +891,7 @@ static void __exit ib_uverbs_cleanup(void) ib_unregister_client(&uverbs_client); mntput(uverbs_event_mnt); unregister_filesystem(&uverbs_event_fs); - class_unregister(&uverbs_class); + class_destroy(uverbs_class); unregister_chrdev_region(IB_UVERBS_BASE_DEV, IB_UVERBS_MAX_DEVICES); idr_destroy(&ib_uverbs_pd_idr); idr_destroy(&ib_uverbs_mr_idr); -- GitLab From 64a0c1c81e300f0f56f26604c81040784e3717f0 Mon Sep 17 00:00:00 2001 From: Ivan Skytte Jorgensen Date: Fri, 28 Oct 2005 15:39:02 -0700 Subject: [PATCH 0747/1519] [SCTP] Do not allow unprivileged programs initiating new associations on privileged ports. Signed-off-by: Ivan Skytte Jorgensen Signed-off-by: Sridhar Samudrala --- net/sctp/socket.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 97b556c1c450..b529af5e6f2a 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1010,6 +1010,19 @@ static int __sctp_connect(struct sock* sk, err = -EAGAIN; goto out_free; } + } else { + /* + * If an unprivileged user inherits a 1-many + * style socket with open associations on a + * privileged port, it MAY be permitted to + * accept new associations, but it SHOULD NOT + * be permitted to open new associations. + */ + if (ep->base.bind_addr.port < PROT_SOCK && + !capable(CAP_NET_BIND_SERVICE)) { + err = -EACCES; + goto out_free; + } } scope = sctp_scope(&to); @@ -1515,6 +1528,19 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, err = -EAGAIN; goto out_unlock; } + } else { + /* + * If an unprivileged user inherits a one-to-many + * style socket with open associations on a privileged + * port, it MAY be permitted to accept new associations, + * but it SHOULD NOT be permitted to open new + * associations. + */ + if (ep->base.bind_addr.port < PROT_SOCK && + !capable(CAP_NET_BIND_SERVICE)) { + err = -EACCES; + goto out_unlock; + } } scope = sctp_scope(&to); -- GitLab From 0e1f60609258e18ec0a0477c646101212822d387 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 28 Oct 2005 15:52:13 -0700 Subject: [PATCH 0748/1519] [IA64] fix warning unused variable `g' 4ac0068f44f192f2de95a7bb36df3e19767a45fb forgot to delete the declaration of this variable which is no longer used. Signed-off-by: Tony Luck --- arch/ia64/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 9a9c1bd01dbc..4b19d0410632 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -587,7 +587,7 @@ thread_matches (struct task_struct *thread, unsigned long addr) static struct task_struct * find_thread_for_addr (struct task_struct *child, unsigned long addr) { - struct task_struct *g, *p; + struct task_struct *p; struct mm_struct *mm; struct list_head *this, *next; int mm_users; -- GitLab From b6a1d5f88473138497d8694ddf174e8e91300068 Mon Sep 17 00:00:00 2001 From: "Martin J. Bligh" Date: Fri, 28 Oct 2005 15:14:44 -0700 Subject: [PATCH 0749/1519] [PATCH] e1000: remove warning about e1000_suspend e1000_suspend is only used under #ifdef CONFIG_PM. Move the declaration of it to be the same way, just like e1000_resume, otherwise gcc whines on compile. I offer as evidence: static struct pci_driver e1000_driver = { .name = e1000_driver_name, .id_table = e1000_pci_tbl, .probe = e1000_probe, .remove = __devexit_p(e1000_remove), /* Power Managment Hooks */ #ifdef CONFIG_PM .suspend = e1000_suspend, .resume = e1000_resume #endif }; Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6b72f6acdd54..a0023f357cb1 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4193,6 +4193,7 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx) return 0; } +#ifdef CONFIG_PM static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) { @@ -4289,7 +4290,6 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) return 0; } -#ifdef CONFIG_PM static int e1000_resume(struct pci_dev *pdev) { -- GitLab From a1bfcd97414d3e9b3c96f27d9b1a1e76c9543ba6 Mon Sep 17 00:00:00 2001 From: Florin Malita Date: Fri, 28 Oct 2005 15:14:46 -0700 Subject: [PATCH 0750/1519] [PATCH] eepro.c: module_param_array cleanup num_params is unused (and unusable in this form). Signed-off-by: Florin Malita Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/eepro.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index dcb3028bb60f..1ce2c675b8a7 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1797,10 +1797,9 @@ MODULE_AUTHOR("Pascal Dupuis and others"); MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver"); MODULE_LICENSE("GPL"); -static int num_params; -module_param_array(io, int, &num_params, 0); -module_param_array(irq, int, &num_params, 0); -module_param_array(mem, int, &num_params, 0); +module_param_array(io, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +module_param_array(mem, int, NULL, 0); module_param(autodetect, int, 0); MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)"); MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)"); -- GitLab From 46e178535836dcd7ef92f179218628d101892c59 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 28 Oct 2005 15:14:47 -0700 Subject: [PATCH 0751/1519] [PATCH] b44: fix suspend/resume Fix suspend/resume on b44 by freeing/reacquiring irq. Otherwise it hangs on resume. Signed-off-by: Pavel Machek Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/b44.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 5485e3b1cd35..0ee3e27969c6 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2041,6 +2041,8 @@ static int b44_suspend(struct pci_dev *pdev, pm_message_t state) b44_free_rings(bp); spin_unlock_irq(&bp->lock); + + free_irq(dev->irq, dev); pci_disable_device(pdev); return 0; } @@ -2057,6 +2059,9 @@ static int b44_resume(struct pci_dev *pdev) if (!netif_running(dev)) return 0; + if (request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev)) + printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name); + spin_lock_irq(&bp->lock); b44_init_rings(bp); -- GitLab From a7ec15da65ab64c5f97beedc4ff21cf3e0ae71c0 Mon Sep 17 00:00:00 2001 From: Ravikiran G Thirumalai Date: Fri, 28 Oct 2005 15:14:49 -0700 Subject: [PATCH 0752/1519] [PATCH] e1000: use vmalloc_node() Allocate node local tx and rx descriptors for the e1000 driver Signed-off-by: Ravikiran Thirumalai Cc: Christoph Lameter Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index a0023f357cb1..d97ad89f5dd2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1149,7 +1149,8 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, int size; size = sizeof(struct e1000_buffer) * txdr->count; - txdr->buffer_info = vmalloc(size); + + txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus)); if(!txdr->buffer_info) { DPRINTK(PROBE, ERR, "Unable to allocate memory for the transmit descriptor ring\n"); @@ -1366,7 +1367,7 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter, int size, desc_len; size = sizeof(struct e1000_buffer) * rxdr->count; - rxdr->buffer_info = vmalloc(size); + rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus)); if (!rxdr->buffer_info) { DPRINTK(PROBE, ERR, "Unable to allocate memory for the receive descriptor ring\n"); -- GitLab From 63f57fb69b017230c77c40f1713e40885ae6d159 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 28 Oct 2005 15:14:51 -0700 Subject: [PATCH 0753/1519] [PATCH] revert "orinoco: Information leakage due to incorrect padding" Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index d3d4ec9e242e..70a3477a2061 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -490,7 +490,8 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - /* Check packet length, pad short packets, round up odd length */ + /* Length of the packet body */ + /* FIXME: what if the skb is smaller than this? */ len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN); skb = skb_padto(skb, len); if (skb == NULL) @@ -547,7 +548,8 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) p = skb->data; } - err = hermes_bap_pwrite(hw, USER_BAP, p, data_len, + /* Round up for odd length packets */ + err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), txfid, data_off); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", -- GitLab From 2c36ed22c6f64de94c6c3b7258dd7285bb093401 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 28 Oct 2005 15:14:52 -0700 Subject: [PATCH 0754/1519] [PATCH] Better fixup for the orinoco driver The latest kernel added a pretty ugly fix for the orinoco etherleak bug which contains bogus skb->len checks already done by the caller and causes copies of all odd sized frames (which are quite common) While the skb->len check should be ripped out the other fix is harder to do properly so I'm proposing for this the -mm tree only until next 2.6.x so that it gets tested. Instead of copying buffers around blindly this code implements a padding aware version of the hermes buffer writing function which does padding as the buffer is loaded and thus more cleanly and without bogus 1.5K copies. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wireless/hermes.c | 38 ++++++++++++++++++++++++++++++++++ drivers/net/wireless/hermes.h | 2 ++ drivers/net/wireless/orinoco.c | 11 ++++++++-- 3 files changed, 49 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c index eba0d9d2b7c5..579480dad374 100644 --- a/drivers/net/wireless/hermes.c +++ b/drivers/net/wireless/hermes.c @@ -444,6 +444,43 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, return err; } +/* Write a block of data to the chip's buffer with padding if + * neccessary, via the BAP. Synchronization/serialization is the + * caller's problem. len must be even. + * + * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + */ +int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len, + u16 id, u16 offset) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + + if (len < 0 || len % 2 || data_len > len) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, id, offset); + if (err) + goto out; + + /* Transfer all the complete words of data */ + hermes_write_words(hw, dreg, buf, data_len/2); + /* If there is an odd byte left over pad and transfer it */ + if (data_len & 1) { + u8 end[2]; + end[1] = 0; + end[0] = ((unsigned char *)buf)[data_len - 1]; + hermes_write_words(hw, dreg, end, 1); + data_len ++; + } + /* Now send zeros for the padding */ + if (data_len < len) + hermes_clear_words(hw, dreg, (len - data_len) / 2); + /* Complete */ + out: + return err; +} + /* Read a Length-Type-Value record from the card. * * If length is NULL, we ignore the length read from the card, and @@ -531,6 +568,7 @@ EXPORT_SYMBOL(hermes_allocate); EXPORT_SYMBOL(hermes_bap_pread); EXPORT_SYMBOL(hermes_bap_pwrite); +EXPORT_SYMBOL(hermes_bap_pwrite_pad); EXPORT_SYMBOL(hermes_read_ltv); EXPORT_SYMBOL(hermes_write_ltv); diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index ad28e3294360..a6bd472d75d4 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -376,6 +376,8 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len, u16 id, u16 offset); int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, u16 id, u16 offset); +int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, + unsigned data_len, unsigned len, u16 id, u16 offset); int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen, u16 *length, void *buf); int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 70a3477a2061..488ab06fb79f 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -542,14 +542,21 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) stats->tx_errors++; goto fail; } + /* Actual xfer length - allow for padding */ + len = ALIGN(data_len, 2); + if (len < ETH_ZLEN - ETH_HLEN) + len = ETH_ZLEN - ETH_HLEN; } else { /* IEEE 802.3 frame */ data_len = len + ETH_HLEN; data_off = HERMES_802_3_OFFSET; p = skb->data; + /* Actual xfer length - round up for odd length packets */ + len = ALIGN(data_len, 2); + if (len < ETH_ZLEN) + len = ETH_ZLEN; } - /* Round up for odd length packets */ - err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), + err = hermes_bap_pwrite_pad(hw, USER_BAP, p, data_len, len, txfid, data_off); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", -- GitLab From 977e74b5f60de3df9831897b726c16870878eee4 Mon Sep 17 00:00:00 2001 From: Ashutosh Naik Date: Fri, 28 Oct 2005 15:14:53 -0700 Subject: [PATCH 0755/1519] [PATCH] e1000: Fixes e1000_suspend warning when CONFIG_PM is not enabled drivers/net/e1000/e1000_main.c:3645: warning: `e1000_suspend' defined but not used Signed-off-by: Ashutosh Naik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index d97ad89f5dd2..efbbda7cbcbf 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -191,8 +191,8 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); static void e1000_restore_vlan(struct e1000_adapter *adapter); -static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); #ifdef CONFIG_PM +static int e1000_suspend(struct pci_dev *pdev, pm_message_t state); static int e1000_resume(struct pci_dev *pdev); #endif -- GitLab From 4cce3390c998600f6648e075e475cf8f6dd8cebe Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 28 Oct 2005 16:38:15 -0700 Subject: [PATCH 0756/1519] [IB] fix up class_device_create() calls Fix class_device_create() calls to match the new prototype which takes a parent device pointer. Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 4 ++-- drivers/infiniband/core/uverbs_main.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 9e49816d7282..97128e25f78b 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -755,7 +755,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, if (cdev_add(port->dev, base_dev + port->dev_num, 1)) goto err_cdev; - port->class_dev = class_device_create(umad_class, port->dev->dev, + port->class_dev = class_device_create(umad_class, NULL, port->dev->dev, device->dma_device, "umad%d", port->dev_num); if (IS_ERR(port->class_dev)) @@ -775,7 +775,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, if (cdev_add(port->sm_dev, base_dev + port->dev_num + IB_UMAD_MAX_PORTS, 1)) goto err_sm_cdev; - port->sm_class_dev = class_device_create(umad_class, port->sm_dev->dev, + port->sm_class_dev = class_device_create(umad_class, NULL, port->sm_dev->dev, device->dma_device, "issm%d", port->dev_num); if (IS_ERR(port->sm_class_dev)) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index ac08d2c93ea1..0eb38f479b39 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -757,7 +757,8 @@ static void ib_uverbs_add_one(struct ib_device *device) if (cdev_add(uverbs_dev->dev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1)) goto err_cdev; - uverbs_dev->class_dev = class_device_create(uverbs_class, uverbs_dev->dev->dev, + uverbs_dev->class_dev = class_device_create(uverbs_class, NULL, + uverbs_dev->dev->dev, device->dma_device, "uverbs%d", uverbs_dev->devnum); if (IS_ERR(uverbs_dev->class_dev)) -- GitLab From 72f30b6f2f5f68dd426e9fe83817b882c2d04e50 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 27 Sep 2005 10:19:39 -0700 Subject: [PATCH 0757/1519] [PATCH] USB: ehci.patch (earlier irq disable) This tweaks the EHCI reboot notifier to also halt the EHCI controller, and makes that halt code force IRQs off. Both should always have been done. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/ehci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- drivers/usb/host/ehci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f5eb9e7b5b18..b3eb02613bff 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -182,6 +182,9 @@ static int ehci_halt (struct ehci_hcd *ehci) { u32 temp = readl (&ehci->regs->status); + /* disable any irqs left enabled by previous code */ + writel (0, &ehci->regs->intr_enable); + if ((temp & STS_HALT) != 0) return 0; @@ -335,12 +338,17 @@ static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) #endif +/* Reboot notifiers kick in for silicon on any bus (not just pci, etc). + * This forcibly disables dma and IRQs, helping kexec and other cases + * where the next system software may expect clean state. + */ static int ehci_reboot (struct notifier_block *self, unsigned long code, void *null) { struct ehci_hcd *ehci; ehci = container_of (self, struct ehci_hcd, reboot_notifier); + (void) ehci_halt (ehci); /* make BIOS/etc use companion controller during reboot */ writel (0, &ehci->regs->configured_flag); -- GitLab From c9c7746dd333c12f482af2f1e63ea7eafc7cd529 Mon Sep 17 00:00:00 2001 From: Rui Santos Date: Fri, 23 Sep 2005 20:06:50 +0100 Subject: [PATCH 0758/1519] [PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras This patch enables direct kernel support for the Artemis and ATIK astronomical based USB CCD cameras. Since all communications with this camera are done via an FTDI 245BM chip, it was only needed to specify the ProductID and VendorID of all three devices. In what tests are concerned, data was transfered from and to the FTDI at the chips Top speed (360KB/s). Signed-off-by: Rui Santos Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) --- drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5a8631c8a4a7..8c12a0acf10d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -471,6 +471,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 2c35d74cc6d6..7c65d46c7598 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -198,6 +198,19 @@ /* an infrared receiver for user access control with IR tags */ #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */ + /* * Protego product ids */ -- GitLab From 8da608caa07d5c9745ec86bf7c25ad423352f9a4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0759/1519] [PATCH] USB: disable tasklet if rtl8150 device is removed while active. This fixes a oops seen in the wild. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/rtl8150.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index c3d4e3589e30..787dd3591d6a 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -909,6 +909,7 @@ static void rtl8150_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (dev) { set_bit(RTL8150_UNPLUG, &dev->flags); + tasklet_disable(&dev->tl); unregister_netdev(dev->netdev); unlink_all_urbs(dev); free_all_urbs(dev); -- GitLab From 094f1649577dfc7f2c7407a8380e05a506b31f7f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0760/1519] [PATCH] USB: add endpoint information to sysfs This patch adds endpoint information for both devices and interfaces to sysfs. Previously it was only possible to get the endpoint information from usbfs, and never possible to get any information on endpoint 0. Signed-off-by: Greg Kroah-Hartman drivers/usb/core/sysfs.c | 195 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/usb.h | 4 2 files changed, 197 insertions(+), 2 deletions(-) --- drivers/usb/core/sysfs.c | 195 ++++++++++++++++++++++++++++++++++++++- include/linux/usb.h | 4 + 2 files changed, 197 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 00297f113849..eae413bf8c2a 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -22,6 +22,174 @@ #include "usb.h" +/* endpoint stuff */ +struct endpoint_attribute { + struct device_attribute dev_attr; + struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev; +}; +#define to_endpoint_attr(_dev_attr) \ + container_of(_dev_attr, struct endpoint_attribute, dev_attr) + +#define usb_ep_attr(field, format_string) \ +static ssize_t show_ep_##field(struct device *dev, struct device_attribute *attr, \ + char *buf) \ +{ \ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); \ + \ + return sprintf(buf, format_string, endpoint_attr->endpoint->field); \ +} +usb_ep_attr(bLength, "%02x\n") +usb_ep_attr(bDescriptorType, "%02x\n") +usb_ep_attr(bEndpointAddress, "%02x\n") +usb_ep_attr(bmAttributes, "%02x\n") +usb_ep_attr(bInterval, "%02x\n") + +static ssize_t show_ep_wMaxPacketSize(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); + + return sprintf(buf, "%04x\n", + le16_to_cpu(endpoint_attr->endpoint->wMaxPacketSize) & 0x07ff); +} + +static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); + char *type = "unknown"; + + switch (endpoint_attr->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_CONTROL: + type = "Control"; + break; + case USB_ENDPOINT_XFER_ISOC: + type = "Isoc"; + break; + case USB_ENDPOINT_XFER_BULK: + type = "Bulk"; + break; + case USB_ENDPOINT_XFER_INT: + type = "Interrupt"; + break; + } + return sprintf(buf, "%s\n", type); +} + +static ssize_t show_ep_interval(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); + struct usb_device *udev = endpoint_attr->udev; + struct usb_endpoint_descriptor *endpoint = endpoint_attr->endpoint; + char unit; + unsigned interval = 0; + unsigned in; + + in = (endpoint->bEndpointAddress & USB_DIR_IN); + + switch (endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_CONTROL: + if (udev->speed == USB_SPEED_HIGH) /* uframes per NAK */ + interval = endpoint->bInterval; + break; + case USB_ENDPOINT_XFER_ISOC: + interval = 1 << (endpoint->bInterval - 1); + break; + case USB_ENDPOINT_XFER_BULK: + if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + interval = endpoint->bInterval; + break; + case USB_ENDPOINT_XFER_INT: + if (udev->speed == USB_SPEED_HIGH) { + interval = 1 << (endpoint->bInterval - 1); + } else + interval = endpoint->bInterval; + break; + } + interval *= (udev->speed == USB_SPEED_HIGH) ? 125 : 1000; + if (interval % 1000) + unit = 'u'; + else { + unit = 'm'; + interval /= 1000; + } + + return sprintf(buf, "%d%cs\n", interval, unit); +} + +static ssize_t show_ep_direction(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); + char *direction; + + if ((endpoint_attr->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL) + direction = "both"; + else if (endpoint_attr->endpoint->bEndpointAddress & USB_DIR_IN) + direction = "in"; + else + direction = "out"; + return sprintf(buf, "%s\n", direction); +} + +static struct endpoint_attribute *create_ep_attr(struct usb_endpoint_descriptor *endpoint, + struct usb_device *udev, char *name, + ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf)) +{ + struct endpoint_attribute *ep_attr; + + ep_attr = kzalloc(sizeof(*ep_attr), GFP_KERNEL); + if (ep_attr) { + ep_attr->endpoint = endpoint; + ep_attr->udev = udev; + ep_attr->dev_attr.attr.name = name; + ep_attr->dev_attr.attr.mode = 0444; + ep_attr->dev_attr.attr.owner = THIS_MODULE; + ep_attr->dev_attr.show = show; + } + return ep_attr; +} + +static void usb_create_ep_files(struct kobject *kobj, struct usb_host_endpoint *endpoint, struct usb_device *udev) +{ + struct usb_endpoint_descriptor *ep; + + ep = &endpoint->desc; + + endpoint->attrs = kzalloc(sizeof(struct attribute *) * 10, GFP_KERNEL); + endpoint->attrs[0] = &(create_ep_attr(ep, udev, "direction", show_ep_direction)->dev_attr.attr); + endpoint->attrs[1] = &(create_ep_attr(ep, udev, "type", show_ep_type)->dev_attr.attr); + endpoint->attrs[2] = &(create_ep_attr(ep, udev, "bLength", show_ep_bLength)->dev_attr.attr); + endpoint->attrs[3] = &(create_ep_attr(ep, udev, "bDescriptorType", show_ep_bDescriptorType)->dev_attr.attr); + endpoint->attrs[4] = &(create_ep_attr(ep, udev, "bEndpointAddress", show_ep_bEndpointAddress)->dev_attr.attr); + endpoint->attrs[5] = &(create_ep_attr(ep, udev, "bmAttributes", show_ep_bmAttributes)->dev_attr.attr); + endpoint->attrs[6] = &(create_ep_attr(ep, udev, "wMaxPacketSize", show_ep_wMaxPacketSize)->dev_attr.attr); + endpoint->attrs[7] = &(create_ep_attr(ep, udev, "bInterval", show_ep_bInterval)->dev_attr.attr); + endpoint->attrs[8] = &(create_ep_attr(ep, udev, "interval", show_ep_interval)->dev_attr.attr); + endpoint->attrs[9] = NULL; + endpoint->num_attrs = 9; + + endpoint->attr_group = kzalloc(sizeof(*endpoint->attr_group), GFP_KERNEL); + endpoint->attr_name = kzalloc(10, GFP_KERNEL); + sprintf(endpoint->attr_name, "ep_%02x", endpoint->desc.bEndpointAddress); + + endpoint->attr_group->attrs = endpoint->attrs; + endpoint->attr_group->name = endpoint->attr_name; + sysfs_create_group(kobj, endpoint->attr_group); +} + +static void usb_remove_ep_files(struct kobject *kobj, struct usb_host_endpoint *endpoint) +{ + int i; + + sysfs_remove_group(kobj, endpoint->attr_group); + kfree(endpoint->attr_group); + kfree(endpoint->attr_name); + for (i = 0; i < endpoint->num_attrs; ++i) + kfree(endpoint->attrs[i]); + kfree(endpoint->attrs); +} + /* Active configuration fields */ #define usb_actconfig_show(field, multiplier, format_string) \ static ssize_t show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ @@ -236,12 +404,14 @@ void usb_create_sysfs_dev_files (struct usb_device *udev) if (udev->serial) device_create_file (dev, &dev_attr_serial); device_create_file (dev, &dev_attr_configuration); + usb_create_ep_files(&dev->kobj, &udev->ep0, udev); } void usb_remove_sysfs_dev_files (struct usb_device *udev) { struct device *dev = &udev->dev; + usb_remove_ep_files(&dev->kobj, &udev->ep0); sysfs_remove_group(&dev->kobj, &dev_attr_grp); if (udev->descriptor.iManufacturer) @@ -333,20 +503,41 @@ static struct attribute_group intf_attr_grp = { .attrs = intf_attrs, }; +static void usb_create_intf_ep_files(struct usb_interface *intf) +{ + struct usb_host_interface *iface_desc; + int i; + + iface_desc = intf->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) + usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i], + interface_to_usbdev(intf)); +} + +static void usb_remove_intf_ep_files(struct usb_interface *intf) +{ + struct usb_host_interface *iface_desc; + int i; + + iface_desc = intf->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) + usb_remove_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i]); +} + void usb_create_sysfs_intf_files (struct usb_interface *intf) { sysfs_create_group(&intf->dev.kobj, &intf_attr_grp); if (intf->cur_altsetting->string) device_create_file(&intf->dev, &dev_attr_interface); - + usb_create_intf_ep_files(intf); } void usb_remove_sysfs_intf_files (struct usb_interface *intf) { + usb_remove_intf_ep_files(intf); sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp); if (intf->cur_altsetting->string) device_remove_file(&intf->dev, &dev_attr_interface); - } diff --git a/include/linux/usb.h b/include/linux/usb.h index 8f731e8f2821..4512210e97e7 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -57,6 +57,10 @@ struct usb_host_endpoint { struct usb_endpoint_descriptor desc; struct list_head urb_list; void *hcpriv; + char *attr_name; + struct attribute_group *attr_group; + struct attribute **attrs; + int num_attrs; unsigned char *extra; /* Extra descriptors */ int extralen; -- GitLab From d6e5bcf4a7ebbe258124a931f1449338340a99b5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0761/1519] [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed Also fixes all drivers that set this field, and removes some other devfs specfic USB logic. Signed-off-by: Greg Kroah-Hartman drivers/usb/class/usblp.c | 3 +-- drivers/usb/core/file.c | 19 ++++--------------- drivers/usb/image/mdc800.c | 3 +-- drivers/usb/input/aiptek.c | 2 +- drivers/usb/input/hiddev.c | 3 +-- drivers/usb/media/dabusb.c | 3 +-- drivers/usb/misc/auerswald.c | 3 +-- drivers/usb/misc/idmouse.c | 5 ++--- drivers/usb/misc/legousbtower.c | 5 ++--- drivers/usb/misc/rio500.c | 3 +-- drivers/usb/misc/sisusbvga/sisusb.c | 5 ----- drivers/usb/misc/usblcd.c | 9 ++++----- drivers/usb/usb-skeleton.c | 3 +-- include/linux/usb.h | 7 ++----- 14 files changed, 22 insertions(+), 51 deletions(-) --- drivers/usb/class/usblp.c | 3 +-- drivers/usb/core/file.c | 19 ++++--------------- drivers/usb/image/mdc800.c | 3 +-- drivers/usb/input/aiptek.c | 2 +- drivers/usb/input/hiddev.c | 3 +-- drivers/usb/media/dabusb.c | 3 +-- drivers/usb/misc/auerswald.c | 3 +-- drivers/usb/misc/idmouse.c | 5 ++--- drivers/usb/misc/legousbtower.c | 5 ++--- drivers/usb/misc/rio500.c | 3 +-- drivers/usb/misc/sisusbvga/sisusb.c | 5 ----- drivers/usb/misc/usblcd.c | 9 ++++----- drivers/usb/usb-skeleton.c | 3 +-- include/linux/usb.h | 7 ++----- 14 files changed, 22 insertions(+), 51 deletions(-) diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index e195709c9c7f..357e75335f17 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -844,9 +844,8 @@ static struct file_operations usblp_fops = { }; static struct usb_class_driver usblp_class = { - .name = "usb/lp%d", + .name = "lp%d", .fops = &usblp_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, .minor_base = USBLP_MINOR_BASE, }; diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 78cb4be9529f..e695308095ae 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -17,7 +17,6 @@ #include #include -#include #include #include @@ -88,8 +87,6 @@ int usb_major_init(void) goto out; } - devfs_mk_dir("usb"); - out: return error; } @@ -97,7 +94,6 @@ int usb_major_init(void) void usb_major_cleanup(void) { class_destroy(usb_class); - devfs_remove("usb"); unregister_chrdev(USB_MAJOR, "usb"); } @@ -112,8 +108,7 @@ void usb_major_cleanup(void) * enabled, the minor number will be based on the next available free minor, * starting at the class_driver->minor_base. * - * This function also creates the devfs file for the usb device, if devfs - * is enabled, and creates a usb class device in the sysfs tree. + * This function also creates a usb class device in the sysfs tree. * * usb_deregister_dev() must be called when the driver is done with * the minor numbers given out by this function. @@ -162,11 +157,8 @@ int usb_register_dev(struct usb_interface *intf, intf->minor = minor; - /* handle the devfs registration */ - snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base); - devfs_mk_cdev(MKDEV(USB_MAJOR, minor), class_driver->mode, name); - /* create a usb class device for this usb interface */ + snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base); temp = strrchr(name, '/'); if (temp && (temp[1] != 0x00)) ++temp; @@ -179,7 +171,6 @@ int usb_register_dev(struct usb_interface *intf, spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; spin_unlock (&minor_lock); - devfs_remove (name); retval = PTR_ERR(intf->class_dev); } exit: @@ -197,9 +188,8 @@ EXPORT_SYMBOL(usb_register_dev); * call to usb_register_dev() (usually when the device is disconnected * from the system.) * - * This function also cleans up the devfs file for the usb device, if devfs - * is enabled, and removes the usb class device from the sysfs tree. - * + * This function also removes the usb class device from the sysfs tree. + * * This should be called by all drivers that use the USB major number. */ void usb_deregister_dev(struct usb_interface *intf, @@ -222,7 +212,6 @@ void usb_deregister_dev(struct usb_interface *intf, spin_unlock (&minor_lock); snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base); - devfs_remove (name); class_device_destroy(usb_class, MKDEV(USB_MAJOR, intf->minor)); intf->class_dev = NULL; intf->minor = -1; diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index a330a4b50e16..e4ec133ee74a 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -425,9 +425,8 @@ static void mdc800_usb_download_notify (struct urb *urb, struct pt_regs *res) static struct usb_driver mdc800_usb_driver; static struct file_operations mdc800_device_ops; static struct usb_class_driver mdc800_class = { - .name = "usb/mdc800%d", + .name = "mdc800%d", .fops = &mdc800_device_ops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, .minor_base = MDC800_DEVICE_MINOR_BASE, }; diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 1c5205321d83..1c3b472a3bca 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -2154,7 +2154,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) * input_handles associated with this input device. * What identifies an evdev input_handler is that it begins * with 'event', continues with a digit, and that in turn - * is mapped to /{devfs}/input/eventN. + * is mapped to input/eventN. */ list_for_each_safe(node, next, &inputdev->h_list) { inputhandle = to_handle(node); diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c index d32427818af7..440377c7a0da 100644 --- a/drivers/usb/input/hiddev.c +++ b/drivers/usb/input/hiddev.c @@ -732,9 +732,8 @@ static struct file_operations hiddev_fops = { }; static struct usb_class_driver hiddev_class = { - .name = "usb/hid/hiddev%d", + .name = "hiddev%d", .fops = &hiddev_fops, - .mode = S_IFCHR | S_IRUGO | S_IWUSR, .minor_base = HIDDEV_MINOR_BASE, }; diff --git a/drivers/usb/media/dabusb.c b/drivers/usb/media/dabusb.c index 6ca2fae99d2d..27b23c55bbc7 100644 --- a/drivers/usb/media/dabusb.c +++ b/drivers/usb/media/dabusb.c @@ -707,9 +707,8 @@ static struct file_operations dabusb_fops = }; static struct usb_class_driver dabusb_class = { - .name = "usb/dabusb%d", + .name = "dabusb%d", .fops = &dabusb_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, .minor_base = DABUSB_MINOR, }; diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index ae4681f9f0ea..5f33f7c64885 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -1873,9 +1873,8 @@ static struct file_operations auerswald_fops = }; static struct usb_class_driver auerswald_class = { - .name = "usb/auer%d", + .name = "auer%d", .fops = &auerswald_fops, - .mode = S_IFCHR | S_IRUGO | S_IWUGO, .minor_base = AUER_MINOR_BASE, }; diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 733acc213726..3944a55ed74c 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -105,11 +105,10 @@ static struct file_operations idmouse_fops = { .release = idmouse_release, }; -/* class driver information for devfs */ +/* class driver information */ static struct usb_class_driver idmouse_class = { - .name = "usb/idmouse%d", + .name = "idmouse%d", .fops = &idmouse_fops, - .mode = S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH, /* filemode (char, 444) */ .minor_base = USB_IDMOUSE_MINOR_BASE, }; diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 7d06105763d4..2703e205bc8f 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -271,12 +271,11 @@ static struct file_operations tower_fops = { /* * usb class driver info in order to get a minor number from the usb core, - * and to have the device registered with devfs and the driver core + * and to have the device registered with the driver core */ static struct usb_class_driver tower_class = { - .name = "usb/legousbtower%d", + .name = "legousbtower%d", .fops = &tower_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, .minor_base = LEGO_USB_TOWER_MINOR_BASE, }; diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 26f77e29c7a6..7d02d8ec6b1a 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -443,9 +443,8 @@ file_operations usb_rio_fops = { }; static struct usb_class_driver usb_rio_class = { - .name = "usb/rio500%d", + .name = "rio500%d", .fops = &usb_rio_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, .minor_base = RIO_MINOR, }; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 39db3155723a..222ae9cd4c7c 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3239,12 +3239,7 @@ static struct file_operations usb_sisusb_fops = { }; static struct usb_class_driver usb_sisusb_class = { -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13) - .name = "usb/sisusbvga%d", - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, -#else .name = "sisusbvga%d", -#endif .fops = &usb_sisusb_fops, .minor_base = SISUSB_MINOR }; diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 096ab3029676..85f3725334b0 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -251,13 +251,12 @@ static struct file_operations lcd_fops = { }; /* - * * usb class driver info in order to get a minor number from the usb core, - * * and to have the device registered with devfs and the driver core - * */ + * usb class driver info in order to get a minor number from the usb core, + * and to have the device registered with the driver core + */ static struct usb_class_driver lcd_class = { - .name = "usb/lcd%d", + .name = "lcd%d", .fops = &lcd_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, .minor_base = USBLCD_MINOR, }; diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 353f24d45bc1..6c3a53f8f26c 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -223,9 +223,8 @@ static struct file_operations skel_fops = { * and to have the device registered with devfs and the driver core */ static struct usb_class_driver skel_class = { - .name = "usb/skel%d", + .name = "skel%d", .fops = &skel_fops, - .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, .minor_base = USB_SKEL_MINOR_BASE, }; diff --git a/include/linux/usb.h b/include/linux/usb.h index 4512210e97e7..04502e183dd1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -576,10 +576,8 @@ extern struct bus_type usb_bus_type; /** * struct usb_class_driver - identifies a USB driver that wants to use the USB major number - * @name: devfs name for this driver. Will also be used by the driver - * class code to create a usb class device. + * @name: the usb class device name for this driver. Will show up in sysfs. * @fops: pointer to the struct file_operations of this driver. - * @mode: the mode for the devfs file to be created for this driver. * @minor_base: the start of the minor range for this driver. * * This structure is used for the usb_register_dev() and @@ -589,8 +587,7 @@ extern struct bus_type usb_bus_type; struct usb_class_driver { char *name; struct file_operations *fops; - mode_t mode; - int minor_base; + int minor_base; }; /* -- GitLab From e639dd3f4edd4847d160899b19e95ee1a06a6dcb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0762/1519] [PATCH] USB: add more snooping hooks in devio.c Now we can log the urbs travelling through usbfs Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 55 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 50 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index befe0c7f63d1..6c15dabcfc0b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -279,6 +279,28 @@ static inline struct async *async_getpending(struct dev_state *ps, void __user * return NULL; } +static void snoop_urb(struct urb *urb, void __user *userurb) +{ + int j; + unsigned char *data = urb->transfer_buffer; + + if (!usbfs_snoop) + return; + + if (urb->pipe & USB_DIR_IN) + dev_info(&urb->dev->dev, "direction=IN\n"); + else + dev_info(&urb->dev->dev, "direction=OUT\n"); + dev_info(&urb->dev->dev, "userurb=%p\n", userurb); + dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n", + urb->transfer_buffer_length); + dev_info(&urb->dev->dev, "actual_length=%d\n", urb->actual_length); + dev_info(&urb->dev->dev, "data: "); + for (j = 0; j < urb->transfer_buffer_length; ++j) + printk ("%02x ", data[j]); + printk("\n"); +} + static void async_completed(struct urb *urb, struct pt_regs *regs) { struct async *as = (struct async *)urb->context; @@ -296,7 +318,9 @@ static void async_completed(struct urb *urb, struct pt_regs *regs) kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid, as->euid); } - wake_up(&ps->wait); + snoop(&urb->dev->dev, "urb complete\n"); + snoop_urb(urb, as->userurb); + wake_up(&ps->wait); } static void destroy_async (struct dev_state *ps, struct list_head *list) @@ -601,7 +625,7 @@ static int proc_control(struct dev_state *ps, void __user *arg) if (usbfs_snoop) { dev_info(&dev->dev, "control read: data "); for (j = 0; j < i; ++j) - printk ("%02x ", (unsigned char)(tbuf)[j]); + printk("%02x ", (unsigned char)(tbuf)[j]); printk("\n"); } if (copy_to_user(ctrl.data, tbuf, i)) { @@ -624,7 +648,7 @@ static int proc_control(struct dev_state *ps, void __user *arg) if (usbfs_snoop) { dev_info(&dev->dev, "control write: data: "); for (j = 0; j < ctrl.wLength; ++j) - printk ("%02x ", (unsigned char)(tbuf)[j]); + printk("%02x ", (unsigned char)(tbuf)[j]); printk("\n"); } usb_unlock_device(dev); @@ -649,7 +673,7 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) unsigned int tmo, len1, pipe; int len2; unsigned char *tbuf; - int i, ret; + int i, j, ret; if (copy_from_user(&bulk, arg, sizeof(bulk))) return -EFAULT; @@ -674,10 +698,18 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) kfree(tbuf); return -EINVAL; } + snoop(&dev->dev, "bulk read: len=0x%02x timeout=%04d\n", + bulk.len, bulk.timeout); usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); if (!i && len2) { + if (usbfs_snoop) { + dev_info(&dev->dev, "bulk read: data "); + for (j = 0; j < len2; ++j) + printk("%02x ", (unsigned char)(tbuf)[j]); + printk("\n"); + } if (copy_to_user(bulk.data, tbuf, len2)) { kfree(tbuf); return -EFAULT; @@ -690,6 +722,14 @@ static int proc_bulk(struct dev_state *ps, void __user *arg) return -EFAULT; } } + snoop(&dev->dev, "bulk write: len=0x%02x timeout=%04d\n", + bulk.len, bulk.timeout); + if (usbfs_snoop) { + dev_info(&dev->dev, "bulk write: data: "); + for (j = 0; j < len1; ++j) + printk("%02x ", (unsigned char)(tbuf)[j]); + printk("\n"); + } usb_unlock_device(dev); i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo); usb_lock_device(dev); @@ -835,7 +875,6 @@ static int proc_setconfig(struct dev_state *ps, void __user *arg) return status; } - static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, struct usbdevfs_iso_packet_desc __user *iso_frame_desc, void __user *arg) @@ -896,6 +935,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, kfree(dr); return -EFAULT; } + snoop(&ps->dev->dev, "control urb\n"); break; case USBDEVFS_URB_TYPE_BULK: @@ -910,6 +950,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EINVAL; if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length)) return -EFAULT; + snoop(&ps->dev->dev, "bulk urb\n"); break; case USBDEVFS_URB_TYPE_ISO: @@ -939,6 +980,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EINVAL; } uurb->buffer_length = totlen; + snoop(&ps->dev->dev, "iso urb\n"); break; case USBDEVFS_URB_TYPE_INTERRUPT: @@ -954,6 +996,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EINVAL; if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length)) return -EFAULT; + snoop(&ps->dev->dev, "interrupt urb\n"); break; default: @@ -1003,6 +1046,8 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, return -EFAULT; } } + snoop(&as->urb->dev->dev, "submit urb\n"); + snoop_urb(as->urb, as->userurb); async_newpending(as); if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) { dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret); -- GitLab From 38ffdd62b0f466ef9126ac9f060ade5f218b4887 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 24 Sep 2005 13:10:16 -0700 Subject: [PATCH 0763/1519] [PATCH] ub: suppress gcc warnings for pointer casts When building on a 64-bit platform, gcc produces a warning "cast of a pointer to an integer of a different size". The scatterlist.offset on the LHS is unsigned int, so I used that originally. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman drivers/block/ub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- drivers/block/ub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index ed4d5006fe62..bfb23d543ff7 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1512,7 +1512,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd) scmd->nsg = 1; sg = &scmd->sgv[0]; sg->page = virt_to_page(sc->top_sense); - sg->offset = (unsigned int)sc->top_sense & (PAGE_SIZE-1); + sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1); sg->length = UB_SENSE_SIZE; scmd->len = UB_SENSE_SIZE; scmd->lun = cmd->lun; @@ -1891,7 +1891,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, cmd->nsg = 1; sg = &cmd->sgv[0]; sg->page = virt_to_page(p); - sg->offset = (unsigned int)p & (PAGE_SIZE-1); + sg->offset = (unsigned long)p & (PAGE_SIZE-1); sg->length = 8; cmd->len = 8; cmd->lun = lun; -- GitLab From 7586269c0b52970f60bb69fcb86e765fc1d72309 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 23 Sep 2005 17:14:37 -0700 Subject: [PATCH 0764/1519] [PATCH] USB: move handoff code This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-) --- drivers/Makefile | 2 +- drivers/pci/quirks.c | 253 +------------------------------ drivers/usb/Makefile | 1 + drivers/usb/host/Makefile | 5 +- drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-) create mode 100644 drivers/usb/host/pci-quirks.c diff --git a/drivers/Makefile b/drivers/Makefile index 1a109a6dd953..65670be6ff1a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -5,7 +5,7 @@ # Rewritten to use lists instead of if-statements. # -obj-$(CONFIG_PCI) += pci/ +obj-$(CONFIG_PCI) += pci/ usb/ obj-$(CONFIG_PARISC) += parisc/ obj-y += video/ obj-$(CONFIG_ACPI) += acpi/ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index ee1605906a3e..bbd9c2323d8c 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -7,6 +7,9 @@ * * Copyright (c) 1999 Martin Mares * + * Init/reset quirks for USB host controllers should be in the + * USB quirks file, where their drivers can access reuse it. + * * The bridge optimization stuff has been removed. If you really * have a silly BIOS which is unable to set your host bridge right, * use the PowerTweak utility (see http://powertweak.sourceforge.net). @@ -644,28 +647,6 @@ static void quirk_via_irq(struct pci_dev *dev) } DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); -/* - * PIIX3 USB: We have to disable USB interrupts that are - * hardwired to PIRQD# and may be shared with an - * external device. - * - * Legacy Support Register (LEGSUP): - * bit13: USB PIRQ Enable (USBPIRQDEN), - * bit4: Trap/SMI On IRQ Enable (USBSMIEN). - * - * We mask out all r/wc bits, too. - */ -static void __devinit quirk_piix3_usb(struct pci_dev *dev) -{ - u16 legsup; - - pci_read_config_word(dev, 0xc0, &legsup); - legsup &= 0x50ef; - pci_write_config_word(dev, 0xc0, legsup); -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb ); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb ); - /* * VIA VT82C598 has its device ID settable and many BIOSes * set it to the ID of VT82C597 for backward compatibility. @@ -1039,234 +1020,6 @@ static void __init quirk_sis_96x_smbus(struct pci_dev *dev) pci_read_config_byte(dev, 0x77, &val); } - -#define UHCI_USBLEGSUP 0xc0 /* legacy support */ -#define UHCI_USBCMD 0 /* command register */ -#define UHCI_USBSTS 2 /* status register */ -#define UHCI_USBINTR 4 /* interrupt register */ -#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ -#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ -#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */ -#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */ -#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */ - -#define OHCI_CONTROL 0x04 -#define OHCI_CMDSTATUS 0x08 -#define OHCI_INTRSTATUS 0x0c -#define OHCI_INTRENABLE 0x10 -#define OHCI_INTRDISABLE 0x14 -#define OHCI_OCR (1 << 3) /* ownership change request */ -#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ -#define OHCI_INTR_OC (1 << 30) /* ownership change */ - -#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */ -#define EHCI_USBCMD 0 /* command register */ -#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ -#define EHCI_USBSTS 4 /* status register */ -#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */ -#define EHCI_USBINTR 8 /* interrupt register */ -#define EHCI_USBLEGSUP 0 /* legacy support register */ -#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ -#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */ -#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ -#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ - -int usb_early_handoff __devinitdata = 0; -static int __init usb_handoff_early(char *str) -{ - usb_early_handoff = 1; - return 0; -} -__setup("usb-handoff", usb_handoff_early); - -static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) -{ - unsigned long base = 0; - int wait_time, delta; - u16 val, sts; - int i; - - for (i = 0; i < PCI_ROM_RESOURCE; i++) - if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { - base = pci_resource_start(pdev, i); - break; - } - - if (!base) - return; - - /* - * stop controller - */ - sts = inw(base + UHCI_USBSTS); - val = inw(base + UHCI_USBCMD); - val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE); - outw(val, base + UHCI_USBCMD); - - /* - * wait while it stops if it was running - */ - if ((sts & UHCI_USBSTS_HALTED) == 0) - { - wait_time = 1000; - delta = 100; - - do { - outw(0x1f, base + UHCI_USBSTS); - udelay(delta); - wait_time -= delta; - val = inw(base + UHCI_USBSTS); - if (val & UHCI_USBSTS_HALTED) - break; - } while (wait_time > 0); - } - - /* - * disable interrupts & legacy support - */ - outw(0, base + UHCI_USBINTR); - outw(0x1f, base + UHCI_USBSTS); - pci_read_config_word(pdev, UHCI_USBLEGSUP, &val); - if (val & 0xbf) - pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT); - -} - -static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) -{ - void __iomem *base; - int wait_time; - - base = ioremap_nocache(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (base == NULL) return; - - if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { - wait_time = 500; /* 0.5 seconds */ - writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); - writel(OHCI_OCR, base + OHCI_CMDSTATUS); - while (wait_time > 0 && - readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { - wait_time -= 10; - msleep(10); - } - } - - /* - * disable interrupts - */ - writel(~(u32)0, base + OHCI_INTRDISABLE); - writel(~(u32)0, base + OHCI_INTRSTATUS); - - iounmap(base); -} - -static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) -{ - int wait_time, delta; - void __iomem *base, *op_reg_base; - u32 hcc_params, val, temp; - u8 cap_length; - - base = ioremap_nocache(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (base == NULL) return; - - cap_length = readb(base); - op_reg_base = base + cap_length; - hcc_params = readl(base + EHCI_HCC_PARAMS); - hcc_params = (hcc_params >> 8) & 0xff; - if (hcc_params) { - pci_read_config_dword(pdev, - hcc_params + EHCI_USBLEGSUP, - &val); - if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) { - /* - * Ok, BIOS is in smm mode, try to hand off... - */ - pci_read_config_dword(pdev, - hcc_params + EHCI_USBLEGCTLSTS, - &temp); - pci_write_config_dword(pdev, - hcc_params + EHCI_USBLEGCTLSTS, - temp | EHCI_USBLEGCTLSTS_SOOE); - val |= EHCI_USBLEGSUP_OS; - pci_write_config_dword(pdev, - hcc_params + EHCI_USBLEGSUP, - val); - - wait_time = 500; - do { - msleep(10); - wait_time -= 10; - pci_read_config_dword(pdev, - hcc_params + EHCI_USBLEGSUP, - &val); - } while (wait_time && (val & EHCI_USBLEGSUP_BIOS)); - if (!wait_time) { - /* - * well, possibly buggy BIOS... - */ - printk(KERN_WARNING "EHCI early BIOS handoff " - "failed (BIOS bug ?)\n"); - pci_write_config_dword(pdev, - hcc_params + EHCI_USBLEGSUP, - EHCI_USBLEGSUP_OS); - pci_write_config_dword(pdev, - hcc_params + EHCI_USBLEGCTLSTS, - 0); - } - } - } - - /* - * halt EHCI & disable its interrupts in any case - */ - val = readl(op_reg_base + EHCI_USBSTS); - if ((val & EHCI_USBSTS_HALTED) == 0) { - val = readl(op_reg_base + EHCI_USBCMD); - val &= ~EHCI_USBCMD_RUN; - writel(val, op_reg_base + EHCI_USBCMD); - - wait_time = 2000; - delta = 100; - do { - writel(0x3f, op_reg_base + EHCI_USBSTS); - udelay(delta); - wait_time -= delta; - val = readl(op_reg_base + EHCI_USBSTS); - if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { - break; - } - } while (wait_time > 0); - } - writel(0, op_reg_base + EHCI_USBINTR); - writel(0x3f, op_reg_base + EHCI_USBSTS); - - iounmap(base); - - return; -} - - - -static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) -{ - if (!usb_early_handoff) - return; - - if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */ - quirk_usb_handoff_uhci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */ - quirk_usb_handoff_ohci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */ - quirk_usb_disable_ehci(pdev); - } - - return; -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); - /* * ... This is further complicated by the fact that some SiS96x south * bridges pretend to be 85C503/5513 instead. In that case see if we diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index df014c2a7c54..aa554f9805ee 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/ obj-$(CONFIG_USB_MON) += mon/ +obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 350d14fc1cc9..58321d3f314c 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -1,8 +1,9 @@ # -# Makefile for USB Host Controller Driver -# framework and drivers +# Makefile for USB Host Controller Drivers # +obj-$(CONFIG_PCI) += pci-quirks.o + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c new file mode 100644 index 000000000000..8ee5c3ed4cd6 --- /dev/null +++ b/drivers/usb/host/pci-quirks.c @@ -0,0 +1,272 @@ +/* + * This file contains code to reset and initialize USB host controllers. + * Some of it includes work-arounds for PCI hardware and BIOS quirks. + * It may need to run early during booting -- before USB would normally + * initialize -- to ensure that Linux doesn't use any legacy modes. + * + * Copyright (c) 1999 Martin Mares + * (and others) + */ + +#include +#include +#include +#include +#include +#include +#include + + +/* + * PIIX3 USB: We have to disable USB interrupts that are + * hardwired to PIRQD# and may be shared with an + * external device. + * + * Legacy Support Register (LEGSUP): + * bit13: USB PIRQ Enable (USBPIRQDEN), + * bit4: Trap/SMI On IRQ Enable (USBSMIEN). + * + * We mask out all r/wc bits, too. + */ +static void __devinit quirk_piix3_usb(struct pci_dev *dev) +{ + u16 legsup; + + pci_read_config_word(dev, 0xc0, &legsup); + legsup &= 0x50ef; + pci_write_config_word(dev, 0xc0, legsup); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb ); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb ); + + +/* FIXME these should be the guts of hcd->reset() methods; resolve all + * the differences between this version and the HCD's version. + */ + +#define UHCI_USBLEGSUP 0xc0 /* legacy support */ +#define UHCI_USBCMD 0 /* command register */ +#define UHCI_USBSTS 2 /* status register */ +#define UHCI_USBINTR 4 /* interrupt register */ +#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ +#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ +#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */ +#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */ +#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */ + +#define OHCI_CONTROL 0x04 +#define OHCI_CMDSTATUS 0x08 +#define OHCI_INTRSTATUS 0x0c +#define OHCI_INTRENABLE 0x10 +#define OHCI_INTRDISABLE 0x14 +#define OHCI_OCR (1 << 3) /* ownership change request */ +#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ +#define OHCI_INTR_OC (1 << 30) /* ownership change */ + +#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */ +#define EHCI_USBCMD 0 /* command register */ +#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ +#define EHCI_USBSTS 4 /* status register */ +#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */ +#define EHCI_USBINTR 8 /* interrupt register */ +#define EHCI_USBLEGSUP 0 /* legacy support register */ +#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ +#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */ +#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ +#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ + +int usb_early_handoff __devinitdata = 0; +static int __init usb_handoff_early(char *str) +{ + usb_early_handoff = 1; + return 0; +} +__setup("usb-handoff", usb_handoff_early); + +static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) +{ + unsigned long base = 0; + int wait_time, delta; + u16 val, sts; + int i; + + for (i = 0; i < PCI_ROM_RESOURCE; i++) + if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { + base = pci_resource_start(pdev, i); + break; + } + + if (!base) + return; + + /* + * stop controller + */ + sts = inw(base + UHCI_USBSTS); + val = inw(base + UHCI_USBCMD); + val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE); + outw(val, base + UHCI_USBCMD); + + /* + * wait while it stops if it was running + */ + if ((sts & UHCI_USBSTS_HALTED) == 0) + { + wait_time = 1000; + delta = 100; + + do { + outw(0x1f, base + UHCI_USBSTS); + udelay(delta); + wait_time -= delta; + val = inw(base + UHCI_USBSTS); + if (val & UHCI_USBSTS_HALTED) + break; + } while (wait_time > 0); + } + + /* + * disable interrupts & legacy support + */ + outw(0, base + UHCI_USBINTR); + outw(0x1f, base + UHCI_USBSTS); + pci_read_config_word(pdev, UHCI_USBLEGSUP, &val); + if (val & 0xbf) + pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT); + +} + +static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) +{ + void __iomem *base; + int wait_time; + + base = ioremap_nocache(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (base == NULL) return; + + if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { + wait_time = 500; /* 0.5 seconds */ + writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); + writel(OHCI_OCR, base + OHCI_CMDSTATUS); + while (wait_time > 0 && + readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { + wait_time -= 10; + msleep(10); + } + } + + /* + * disable interrupts + */ + writel(~(u32)0, base + OHCI_INTRDISABLE); + writel(~(u32)0, base + OHCI_INTRSTATUS); + + iounmap(base); +} + +static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) +{ + int wait_time, delta; + void __iomem *base, *op_reg_base; + u32 hcc_params, val, temp; + u8 cap_length; + + base = ioremap_nocache(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (base == NULL) return; + + cap_length = readb(base); + op_reg_base = base + cap_length; + hcc_params = readl(base + EHCI_HCC_PARAMS); + hcc_params = (hcc_params >> 8) & 0xff; + if (hcc_params) { + pci_read_config_dword(pdev, + hcc_params + EHCI_USBLEGSUP, + &val); + if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) { + /* + * Ok, BIOS is in smm mode, try to hand off... + */ + pci_read_config_dword(pdev, + hcc_params + EHCI_USBLEGCTLSTS, + &temp); + pci_write_config_dword(pdev, + hcc_params + EHCI_USBLEGCTLSTS, + temp | EHCI_USBLEGCTLSTS_SOOE); + val |= EHCI_USBLEGSUP_OS; + pci_write_config_dword(pdev, + hcc_params + EHCI_USBLEGSUP, + val); + + wait_time = 500; + do { + msleep(10); + wait_time -= 10; + pci_read_config_dword(pdev, + hcc_params + EHCI_USBLEGSUP, + &val); + } while (wait_time && (val & EHCI_USBLEGSUP_BIOS)); + if (!wait_time) { + /* + * well, possibly buggy BIOS... + */ + printk(KERN_WARNING "EHCI early BIOS handoff " + "failed (BIOS bug ?)\n"); + pci_write_config_dword(pdev, + hcc_params + EHCI_USBLEGSUP, + EHCI_USBLEGSUP_OS); + pci_write_config_dword(pdev, + hcc_params + EHCI_USBLEGCTLSTS, + 0); + } + } + } + + /* + * halt EHCI & disable its interrupts in any case + */ + val = readl(op_reg_base + EHCI_USBSTS); + if ((val & EHCI_USBSTS_HALTED) == 0) { + val = readl(op_reg_base + EHCI_USBCMD); + val &= ~EHCI_USBCMD_RUN; + writel(val, op_reg_base + EHCI_USBCMD); + + wait_time = 2000; + delta = 100; + do { + writel(0x3f, op_reg_base + EHCI_USBSTS); + udelay(delta); + wait_time -= delta; + val = readl(op_reg_base + EHCI_USBSTS); + if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) { + break; + } + } while (wait_time > 0); + } + writel(0, op_reg_base + EHCI_USBINTR); + writel(0x3f, op_reg_base + EHCI_USBSTS); + + iounmap(base); + + return; +} + + + +static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) +{ + if (!usb_early_handoff) + return; + + if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */ + quirk_usb_handoff_uhci(pdev); + } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */ + quirk_usb_handoff_ohci(pdev); + } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */ + quirk_usb_disable_ehci(pdev); + } + + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); -- GitLab From db69087437dd5135a9362da1c37fe072070e8f60 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:56:33 -0700 Subject: [PATCH 0765/1519] [PATCH] usb_interface power state This updates the handling of power state for USB interfaces. - Formalizes an existing invariant: interface "power state" is a boolean: ON when I/O is allowed, and FREEZE otherwise. It does so by defining some inlined helpers, then using them. - Adds a useful invariant: the only interfaces marked active are those bound to non-suspended drivers. Later patches build on this invariant. - Simplifies the interface driver API (and removes some error paths) by removing the requirement that they record power state changes during suspend and resume callbacks. Now usbcore does that. A few drivers were simplified to address that last change. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hub.c | 33 +++++++++------------ drivers/usb/core/message.c | 1 drivers/usb/core/usb.c | 65 +++++++++++++++++++++++++++++++++---------- drivers/usb/core/usb.h | 18 +++++++++++ drivers/usb/input/hid-core.c | 2 - drivers/usb/misc/usbtest.c | 10 ------ drivers/usb/net/pegasus.c | 2 - drivers/usb/net/usbnet.c | 2 - 8 files changed, 85 insertions(+), 48 deletions(-) --- drivers/usb/core/hub.c | 33 +++++++++--------- drivers/usb/core/message.c | 1 + drivers/usb/core/usb.c | 65 ++++++++++++++++++++++++++++-------- drivers/usb/core/usb.h | 18 ++++++++++ drivers/usb/input/hid-core.c | 2 -- drivers/usb/misc/usbtest.c | 10 ------ drivers/usb/net/pegasus.c | 2 -- drivers/usb/net/usbnet.c | 2 -- 8 files changed, 85 insertions(+), 48 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c3e2024c4347..61341d2f3c0e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1624,7 +1624,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, struct usb_driver *driver; intf = udev->actconfig->interface[i]; - if (state.event <= intf->dev.power.power_state.event) + if (!is_active(intf)) continue; if (!intf->dev.driver) continue; @@ -1632,11 +1632,12 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, if (driver->suspend) { status = driver->suspend(intf, state); - if (intf->dev.power.power_state.event != state.event - || status) + if (status == 0) + mark_quiesced(intf); + else dev_err(&intf->dev, - "suspend %d fail, code %d\n", - state.event, status); + "suspend error %d\n", + status); } /* only drivers with suspend() can ever resume(); @@ -1787,7 +1788,7 @@ static int finish_port_resume(struct usb_device *udev) struct usb_driver *driver; intf = udev->actconfig->interface[i]; - if (intf->dev.power.power_state.event == PM_EVENT_ON) + if (is_active(intf)) continue; if (!intf->dev.driver) { /* FIXME maybe force to alt 0 */ @@ -1800,12 +1801,14 @@ static int finish_port_resume(struct usb_device *udev) continue; /* can we do better than just logging errors? */ + mark_active(intf); status = driver->resume(intf); - if (intf->dev.power.power_state.event != PM_EVENT_ON - || status) + if (status < 0) { + mark_quiesced(intf); dev_dbg(&intf->dev, - "resume fail, state %d code %d\n", - intf->dev.power.power_state.event, status); + "resume error %d\n", + status); + } } status = 0; @@ -1952,7 +1955,7 @@ static int remote_wakeup(struct usb_device *udev) return status; } -static int hub_suspend(struct usb_interface *intf, pm_message_t state) +static int hub_suspend(struct usb_interface *intf, pm_message_t msg) { struct usb_hub *hub = usb_get_intfdata (intf); struct usb_device *hdev = hub->hdev; @@ -1970,14 +1973,13 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t state) if (!udev) continue; down(&udev->serialize); - status = __usb_suspend_device(udev, port1, state); + status = __usb_suspend_device(udev, port1, msg); up(&udev->serialize); if (status < 0) dev_dbg(&intf->dev, "suspend port %d --> %d\n", port1, status); } - intf->dev.power.power_state = state; return 0; } @@ -1988,9 +1990,6 @@ static int hub_resume(struct usb_interface *intf) unsigned port1; int status; - if (intf->dev.power.power_state.event == PM_EVENT_ON) - return 0; - for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; u16 portstat, portchange; @@ -2024,8 +2023,6 @@ static int hub_resume(struct usb_interface *intf) } up(&udev->serialize); } - intf->dev.power.power_state = PMSG_ON; - hub->resume_root_hub = 0; hub_activate(hub); return 0; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index f9a81e84dbdf..ebf59ea99263 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1393,6 +1393,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) intf->dev.dma_mask = dev->dev.dma_mask; intf->dev.release = release_interface; device_initialize (&intf->dev); + mark_quiesced(intf); sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d", dev->bus->busnum, dev->devpath, configuration, diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 4c57f3f649ed..6ecfdce4f848 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -107,10 +107,19 @@ static int usb_probe_interface(struct device *dev) id = usb_match_id (intf, driver->id_table); if (id) { dev_dbg (dev, "%s - got id\n", __FUNCTION__); + + /* Interface "power state" doesn't correspond to any hardware + * state whatsoever. We use it to record when it's bound to + * a driver that may start I/0: it's not frozen/quiesced. + */ + mark_active(intf); intf->condition = USB_INTERFACE_BINDING; error = driver->probe (intf, id); - intf->condition = error ? USB_INTERFACE_UNBOUND : - USB_INTERFACE_BOUND; + if (error) { + mark_quiesced(intf); + intf->condition = USB_INTERFACE_UNBOUND; + } else + intf->condition = USB_INTERFACE_BOUND; } return error; @@ -136,6 +145,7 @@ static int usb_unbind_interface(struct device *dev) 0); usb_set_intfdata(intf, NULL); intf->condition = USB_INTERFACE_UNBOUND; + mark_quiesced(intf); return 0; } @@ -299,6 +309,7 @@ int usb_driver_claim_interface(struct usb_driver *driver, dev->driver = &driver->driver; usb_set_intfdata(iface, priv); iface->condition = USB_INTERFACE_BOUND; + mark_active(iface); /* if interface was already added, bind now; else let * the future device_add() bind it, bypassing probe() @@ -345,6 +356,7 @@ void usb_driver_release_interface(struct usb_driver *driver, dev->driver = NULL; usb_set_intfdata(iface, NULL); iface->condition = USB_INTERFACE_UNBOUND; + mark_quiesced(iface); } /** @@ -1404,8 +1416,9 @@ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, static int usb_generic_suspend(struct device *dev, pm_message_t message) { - struct usb_interface *intf; - struct usb_driver *driver; + struct usb_interface *intf; + struct usb_driver *driver; + int status; if (dev->driver == &usb_generic_driver) return usb_suspend_device (to_usb_device(dev), message); @@ -1417,21 +1430,34 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) intf = to_usb_interface(dev); driver = to_usb_driver(dev->driver); - /* there's only one USB suspend state */ - if (intf->dev.power.power_state.event) + /* with no hardware, USB interfaces only use FREEZE and ON states */ + if (!is_active(intf)) return 0; - if (driver->suspend) - return driver->suspend(intf, message); - return 0; + if (driver->suspend && driver->resume) { + status = driver->suspend(intf, message); + if (status) + dev_err(dev, "%s error %d\n", "suspend", status); + else + mark_quiesced(intf); + } else { + // FIXME else if there's no suspend method, disconnect... + dev_warn(dev, "no %s?\n", "suspend"); + status = 0; + } + return status; } static int usb_generic_resume(struct device *dev) { - struct usb_interface *intf; - struct usb_driver *driver; + struct usb_interface *intf; + struct usb_driver *driver; + int status; + + if (dev->power.power_state.event == PM_EVENT_ON) + return 0; - /* devices resume through their hub */ + /* devices resume through their hubs */ if (dev->driver == &usb_generic_driver) return usb_resume_device (to_usb_device(dev)); @@ -1442,8 +1468,19 @@ static int usb_generic_resume(struct device *dev) intf = to_usb_interface(dev); driver = to_usb_driver(dev->driver); - if (driver->resume) - return driver->resume(intf); + /* if driver was suspended, it has a resume method; + * however, sysfs can wrongly mark things as suspended + * (on the "no suspend method" FIXME path above) + */ + mark_active(intf); + if (driver->resume) { + status = driver->resume(intf); + if (status) { + dev_err(dev, "%s error %d\n", "resume", status); + mark_quiesced(intf); + } + } else + dev_warn(dev, "no %s?\n", "resume"); return 0; } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index e6504f3370ad..3741a990403e 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -28,6 +28,24 @@ extern void usb_major_cleanup(void); extern int usb_host_init(void); extern void usb_host_cleanup(void); +/* Interfaces and their "power state" are owned by usbcore */ + +static inline void mark_active(struct usb_interface *f) +{ + f->dev.power.power_state.event = PM_EVENT_ON; +} + +static inline void mark_quiesced(struct usb_interface *f) +{ + f->dev.power.power_state.event = PM_EVENT_FREEZE; +} + +static inline int is_active(struct usb_interface *f) +{ + return f->dev.power.power_state.event == PM_EVENT_ON; +} + + /* for labeling diagnostics */ extern const char *usbcore_name; diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 411a0645a7a3..f7fcce731f54 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1887,7 +1887,6 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) struct hid_device *hid = usb_get_intfdata (intf); usb_kill_urb(hid->urbin); - intf->dev.power.power_state = PMSG_SUSPEND; dev_dbg(&intf->dev, "suspend\n"); return 0; } @@ -1897,7 +1896,6 @@ static int hid_resume(struct usb_interface *intf) struct hid_device *hid = usb_get_intfdata (intf); int status; - intf->dev.power.power_state = PMSG_ON; if (hid->open) status = usb_submit_urb(hid->urbin, GFP_NOIO); else diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 54799eb0bc60..d055196533af 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1948,21 +1948,11 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id) static int usbtest_suspend (struct usb_interface *intf, pm_message_t message) { - struct usbtest_dev *dev = usb_get_intfdata (intf); - - down (&dev->sem); - intf->dev.power.power_state = PMSG_SUSPEND; - up (&dev->sem); return 0; } static int usbtest_resume (struct usb_interface *intf) { - struct usbtest_dev *dev = usb_get_intfdata (intf); - - down (&dev->sem); - intf->dev.power.power_state = PMSG_ON; - up (&dev->sem); return 0; } diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 6a4ffe6c3977..537eb181d985 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -1384,7 +1384,6 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message) usb_kill_urb(pegasus->rx_urb); usb_kill_urb(pegasus->intr_urb); } - intf->dev.power.power_state = PMSG_SUSPEND; return 0; } @@ -1392,7 +1391,6 @@ static int pegasus_resume (struct usb_interface *intf) { struct pegasus *pegasus = usb_get_intfdata(intf); - intf->dev.power.power_state = PMSG_ON; netif_device_attach (pegasus->net); if (netif_running(pegasus->net)) { pegasus->rx_urb->status = 0; diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index fce81d738933..74f05c9c84d5 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -1185,7 +1185,6 @@ int usbnet_suspend (struct usb_interface *intf, pm_message_t message) netif_device_detach (dev->net); (void) unlink_urbs (dev, &dev->rxq); (void) unlink_urbs (dev, &dev->txq); - intf->dev.power.power_state = PMSG_SUSPEND; return 0; } EXPORT_SYMBOL_GPL(usbnet_suspend); @@ -1194,7 +1193,6 @@ int usbnet_resume (struct usb_interface *intf) { struct usbnet *dev = usb_get_intfdata(intf); - intf->dev.power.power_state = PMSG_ON; netif_device_attach (dev->net); tasklet_schedule (&dev->bh); return 0; -- GitLab From c9f89fa40cf274130b56475175a35af961d4b165 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:57:04 -0700 Subject: [PATCH 0766/1519] [PATCH] remove suspend-path recursion This patch removes some recursion in the CONFIG_USB_SUSPEND logic, which suspended children (of devices or hubs) that weren't already suspended. When it sees such cases, suspend now just fails cleanly. That logic was not needed during system-wide sleep state transitions; and given the current notions of how to manage selective suspend transitions, we don't want it there either. Where it was particularly handy was coping with various limitations of the sysfs "echo -n N > power/state" support. (These include assuming that "N" is always meaningful to the driver; and that drivers can only transition to state N from state zero.) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 76 +++++++----------------------------------- 1 file changed, 12 insertions(+), 64 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 61341d2f3c0e..d3337d9c31dc 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -453,6 +453,7 @@ static void hub_quiesce(struct usb_hub *hub) { /* stop khubd and related activity */ hub->quiescing = 1; + hub->activating = 0; usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work(&hub->leds); @@ -1613,68 +1614,21 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, return 0; } - /* suspend interface drivers; if this is a hub, it - * suspends the child devices - */ + /* all interfaces must already be suspended */ if (udev->actconfig) { int i; for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { struct usb_interface *intf; - struct usb_driver *driver; intf = udev->actconfig->interface[i]; - if (!is_active(intf)) - continue; - if (!intf->dev.driver) - continue; - driver = to_usb_driver(intf->dev.driver); - - if (driver->suspend) { - status = driver->suspend(intf, state); - if (status == 0) - mark_quiesced(intf); - else - dev_err(&intf->dev, - "suspend error %d\n", - status); - } - - /* only drivers with suspend() can ever resume(); - * and after power loss, even they won't. - * bus_rescan_devices() can rebind drivers later. - * - * FIXME the PM core self-deadlocks when unbinding - * drivers during suspend/resume ... everything grabs - * dpm_sem (not a spinlock, ugh). we want to unbind, - * since we know every driver's probe/disconnect works - * even for drivers that can't suspend. - */ - if (!driver->suspend || state.event > PM_EVENT_FREEZE) { -#if 1 - dev_warn(&intf->dev, "resume is unsafe!\n"); -#else - down_write(&usb_bus_type.rwsem); - device_release_driver(&intf->dev); - up_write(&usb_bus_type.rwsem); -#endif + if (is_active(intf)) { + dev_dbg(&intf->dev, "nyet suspended\n"); + return -EBUSY; } } } - /* - * FIXME this needs port power off call paths too, to help force - * USB into the "generic" PM model. At least for devices on - * ports that aren't using ganged switching (usually root hubs). - * - * NOTE: SRP-capable links should adopt more aggressive poweroff - * policies (when HNP doesn't apply) once we have mechanisms to - * turn power back on! (Likely not before 2.7...) - */ - if (state.event > PM_EVENT_FREEZE) { - dev_warn(&udev->dev, "no poweroff yet, suspending instead\n"); - } - /* "global suspend" of the HC-to-USB interface (root hub), or * "selective suspend" of just one hub-device link. */ @@ -1960,26 +1914,20 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_hub *hub = usb_get_intfdata (intf); struct usb_device *hdev = hub->hdev; unsigned port1; - int status; - - /* stop khubd and related activity */ - hub_quiesce(hub); - /* then suspend every port */ + /* fail if children aren't already suspended */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; udev = hdev->children [port1-1]; - if (!udev) - continue; - down(&udev->serialize); - status = __usb_suspend_device(udev, port1, msg); - up(&udev->serialize); - if (status < 0) - dev_dbg(&intf->dev, "suspend port %d --> %d\n", - port1, status); + if (udev && udev->state != USB_STATE_SUSPENDED) { + dev_dbg(&intf->dev, "port %d nyet suspended\n", port1); + return -EBUSY; + } } + /* stop khubd and related activity */ + hub_quiesce(hub); return 0; } -- GitLab From 390a8c345e6415cbf811232feedac70b56c9fc8d Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:57:27 -0700 Subject: [PATCH 0767/1519] [PATCH] remove usb_suspend_device() parameter This patch removes the extra usb_suspend_device() parameter. The original reason to pass that parameter was so that this routine could suspend any active children. A previous patch removed that functionality ... leaving no reason to pass the parameter. A close analogy is pci_set_power_state, which doesn't need a pm_message_t either. On the internal code path that comes through the driver model, the parameter is now used to distinguish cases where USB devices need to "freeze" but not suspend. It also checks for an error case that's accessible through sysfs: attempting to suspend a device before its interfaces (or for hubs, ports). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-) --- drivers/usb/core/hub.c | 34 +++++++++++++++++++++------------- drivers/usb/core/usb.c | 23 +++++++++++++++++++++-- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- include/linux/usb.h | 2 +- 6 files changed, 46 insertions(+), 19 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d3337d9c31dc..33127b828d60 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1323,11 +1323,9 @@ int usb_new_device(struct usb_device *udev) * (Includes HNP test device.) */ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) { - static int __usb_suspend_device (struct usb_device *, - int port1, pm_message_t state); - err = __usb_suspend_device(udev, - udev->bus->otg_port, - PMSG_SUSPEND); + static int __usb_suspend_device(struct usb_device *, + int port1); + err = __usb_suspend_device(udev, udev->bus->otg_port); if (err < 0) dev_dbg(&udev->dev, "HNP fail, %d\n", err); } @@ -1517,7 +1515,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) /* FIXME let caller ask to power down the port: * - some devices won't enumerate without a VBUS power cycle * - SRP saves power that way - * - usb_suspend_device(dev, PMSG_SUSPEND) + * - ... new call, TBD ... * That's easy if this hub can switch power per-port, and * khubd reactivates the port later (timer, SRP, etc). * Powerdown must be optional, because of reset/DFU. @@ -1599,9 +1597,12 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, * Other than re-initializing the hub (plug/unplug, except for root hubs), * Linux (2.6) currently has NO mechanisms to initiate that: no khubd * timer, no SRP, no requests through sysfs. + * + * If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when + * the root hub for their bus goes into global suspend ... so we don't + * (falsely) update the device power state to say it suspended. */ -static int __usb_suspend_device (struct usb_device *udev, int port1, - pm_message_t state) +static int __usb_suspend_device (struct usb_device *udev, int port1) { int status; @@ -1648,14 +1649,13 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, udev); if (status == 0) - udev->dev.power.power_state = state; + udev->dev.power.power_state = PMSG_SUSPEND; return status; } /** * usb_suspend_device - suspend a usb device * @udev: device that's no longer in active use - * @state: PMSG_SUSPEND to suspend * Context: must be able to sleep; device not locked * * Suspends a USB device that isn't in active use, conserving power. @@ -1664,13 +1664,16 @@ static int __usb_suspend_device (struct usb_device *udev, int port1, * suspend by the host, using usb_resume_device(). It's also routine * to disconnect devices while they are suspended. * + * This only affects the USB hardware for a device; its interfaces + * (and, for hubs, child devices) must already have been suspended. + * * Suspending OTG devices may trigger HNP, if that's been enabled * between a pair of dual-role devices. That will change roles, such * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral. * * Returns 0 on success, else negative errno. */ -int usb_suspend_device(struct usb_device *udev, pm_message_t state) +int usb_suspend_device(struct usb_device *udev) { int port1, status; @@ -1678,12 +1681,15 @@ int usb_suspend_device(struct usb_device *udev, pm_message_t state) if (port1 < 0) return port1; - status = __usb_suspend_device(udev, port1, state); + status = __usb_suspend_device(udev, port1); usb_unlock_device(udev); return status; } /* + * If the USB "suspend" state is in use (rather than "global suspend"), + * many devices will be individually taken out of suspend state using + * special" resume" signaling. These routines kick in shortly after * hardware resume signaling is finished, either because of selective * resume (by host) or remote wakeup (by device) ... now see what changed * in the tree that's rooted at this device. @@ -1986,13 +1992,15 @@ void usb_resume_root_hub(struct usb_device *hdev) #else /* !CONFIG_USB_SUSPEND */ -int usb_suspend_device(struct usb_device *udev, pm_message_t state) +int usb_suspend_device(struct usb_device *udev) { + /* state does NOT lie by saying it's USB_STATE_SUSPENDED! */ return 0; } int usb_resume_device(struct usb_device *udev) { + udev->dev.power_state.event = PM_EVENT_ON; return 0; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 6ecfdce4f848..e89dbd43e952 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1414,14 +1414,33 @@ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); } +static int verify_suspended(struct device *dev, void *unused) +{ + return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0; +} + static int usb_generic_suspend(struct device *dev, pm_message_t message) { struct usb_interface *intf; struct usb_driver *driver; int status; - if (dev->driver == &usb_generic_driver) - return usb_suspend_device (to_usb_device(dev), message); + /* USB devices enter SUSPEND state through their hubs, but can be + * marked for FREEZE as soon as their children are already idled. + */ + if (dev->driver == &usb_generic_driver) { + if (dev->power.power_state.event == message.event) + return 0; + /* we need to rule out bogus requests through sysfs */ + status = device_for_each_child(dev, NULL, verify_suspended); + if (status) + return status; + if (message.event == PM_EVENT_FREEZE) { + dev->power.power_state = message; + return 0; + } + return usb_suspend_device (to_usb_device(dev)); + } if ((dev->driver == NULL) || (dev->driver_data == &usb_generic_driver_data)) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b3eb02613bff..513fccbb8e43 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -759,7 +759,7 @@ static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message) msleep (100); #ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub, message); + (void) usb_suspend_device (hcd->self.root_hub); #else usb_lock_device (hcd->self.root_hub); (void) ehci_hub_suspend (hcd); diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 642f35068ce2..554d60282a9d 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1781,7 +1781,7 @@ static int isp116x_suspend(struct device *dev, pm_message_t state) VDBG("%s: state %x\n", __func__, state); - ret = usb_suspend_device(hcd->self.root_hub, state); + ret = usb_suspend_device(hcd->self.root_hub); if (!ret) { dev->power.power_state = state; INFO("%s suspended\n", hcd_name); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index eede6be098d2..41e85980fa7a 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -119,7 +119,7 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) msleep (100); #ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub, message); + (void) usb_suspend_device (hcd->self.root_hub); #else usb_lock_device (hcd->self.root_hub); (void) ohci_hub_suspend (hcd); diff --git a/include/linux/usb.h b/include/linux/usb.h index 04502e183dd1..25ec91ddcd04 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -976,7 +976,7 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, int timeout); /* selective suspend/resume */ -extern int usb_suspend_device(struct usb_device *dev, pm_message_t message); +extern int usb_suspend_device(struct usb_device *dev); extern int usb_resume_device(struct usb_device *dev); -- GitLab From dbc3887e7df4be78b33a83b97fde5d5f9a389859 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:57:36 -0700 Subject: [PATCH 0768/1519] [PATCH] remove duplicated resume path code This gets rid of some inconsistently duplicated logic to resume interfaces. Similar code was in both finish_port_resume() and in usb_generic_resume(). Now there is just one copy of that code, accessed regardless of whether CONFIG_USB_SUSPEND is enabled. Fault handling is also more consistent. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 33 +++++---------------------------- 1 file changed, 5 insertions(+), 28 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 33127b828d60..b2ae9b6ca4db 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1723,6 +1723,7 @@ static int finish_port_resume(struct usb_device *udev) status); else if (udev->actconfig) { unsigned i; + int (*resume)(struct device *); le16_to_cpus(&devstatus); if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { @@ -1741,35 +1742,11 @@ static int finish_port_resume(struct usb_device *udev) } /* resume interface drivers; if this is a hub, it - * resumes the child devices + * may have a child resume event to deal with soon */ - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - struct usb_interface *intf; - struct usb_driver *driver; - - intf = udev->actconfig->interface[i]; - if (is_active(intf)) - continue; - if (!intf->dev.driver) { - /* FIXME maybe force to alt 0 */ - continue; - } - driver = to_usb_driver(intf->dev.driver); - - /* bus_rescan_devices() may rebind drivers */ - if (!driver->resume) - continue; - - /* can we do better than just logging errors? */ - mark_active(intf); - status = driver->resume(intf); - if (status < 0) { - mark_quiesced(intf); - dev_dbg(&intf->dev, - "resume error %d\n", - status); - } - } + resume = udev->dev.bus->resume; + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) + (void) resume(&udev->actconfig->interface[i]->dev); status = 0; } else if (udev->devnum <= 0) { -- GitLab From 8ad7fe16df5e07320626be83fbba6d1c6bda5ec0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Sep 2005 19:59:11 -0700 Subject: [PATCH 0769/1519] [PATCH] remove some USB_SUSPEND dependencies This simplifies some of the PM-related #ifdeffing by recognizing that USB_SUSPEND depends on PM. Also, OHCI drivers were often testing for USB_SUSPEND when they should have tested just PM. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-) --- drivers/usb/core/hcd.c | 2 ++ drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 4 ++-- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pci.c | 2 +- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 3 +-- drivers/usb/host/ohci-sa1111.c | 2 +- 9 files changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 14c47a10da86..5e8ade07d7f9 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1431,6 +1431,8 @@ hcd_endpoint_disable (struct usb_device *udev, struct usb_host_endpoint *ep) /*-------------------------------------------------------------------------*/ +/* FIXME make this #ifdef CONFIG_PM ... update root hubs, retest */ + #ifdef CONFIG_USB_SUSPEND static int hcd_hub_suspend (struct usb_bus *bus) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index f8da8c7af7c6..c26ab5f2a403 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -791,7 +791,7 @@ static void ohci_stop (struct usb_hcd *hcd) /* must not be called from interrupt context */ -#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) +#ifdef CONFIG_PM static int ohci_restart (struct ohci_hcd *ohci) { diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index ce7b28da7a15..b96948ea3005 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -36,7 +36,7 @@ /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) +#ifdef CONFIG_PM #define OHCI_SCHED_ENABLES \ (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE) @@ -294,7 +294,7 @@ static void ohci_rh_resume (void *_hcd) ohci_dbg(ohci, "rh_resume ??\n"); } -#endif /* CONFIG_USB_SUSPEND || CONFIG_PM */ +#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index a574216625a0..e67c07dc426d 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -420,7 +420,7 @@ static const struct hc_driver ohci_omap_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 41e85980fa7a..0afa237b02ad 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -218,7 +218,7 @@ static const struct hc_driver ohci_pci_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 251533363028..ec20710e99fe 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -163,7 +163,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif @@ -196,7 +196,7 @@ static struct device_driver ohci_hcd_ppc_soc_driver = { .bus = &platform_bus_type, .probe = ohci_hcd_ppc_soc_drv_probe, .remove = ohci_hcd_ppc_soc_drv_remove, -#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM) +#ifdef CONFIG_PM /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/ /*.resume = ohci_hcd_ppc_soc_drv_resume,*/ #endif diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index f042261ecb8e..986c4f656e22 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -278,7 +278,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index da7d5478f74d..8cf12b2be2a3 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -448,8 +448,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { */ .hub_status_data = ohci_s3c2410_hub_status_data, .hub_control = ohci_s3c2410_hub_control, - -#if defined(CONFIG_USB_SUSPEND) && 0 +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 814d2be4ee7b..7dd1f410b7f1 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -235,7 +235,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif -- GitLab From e08fb39b771dd7dcba405669b5384fe9929e1caf Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 19 Sep 2005 09:40:24 -0700 Subject: [PATCH 0770/1519] [PATCH] USB: Fix usb hub build Signed-off-by: Matt Porter Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b2ae9b6ca4db..660064466791 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1977,7 +1977,7 @@ int usb_suspend_device(struct usb_device *udev) int usb_resume_device(struct usb_device *udev) { - udev->dev.power_state.event = PM_EVENT_ON; + udev->dev.power.power_state.event = PM_EVENT_ON; return 0; } -- GitLab From 8b4cd42134fbd3c9a9a5c3467d31717798219b1b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 16 Sep 2005 14:17:45 -0400 Subject: [PATCH 0771/1519] [PATCH] USB: UHCI: Remove unused fields and unneeded tests for NULL This patch (as562) removes from the uhci-hcd driver a few unused fields and some unnecessary tests against NULL and assignments to NULL. In fact it wasn't until fairly recently that the tests became unnecessary. Before last winter it was possible that the driver's stop() routine would get called even if the start() routine returned an error, but now that can't happen. Hence there's no longer any need to check for partial initialization. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-debug.c | 1 - drivers/usb/host/uhci-hcd.c | 44 ++++++++--------------------------- drivers/usb/host/uhci-hcd.h | 3 --- drivers/usb/host/uhci-q.c | 5 ---- 4 files changed, 10 insertions(+), 43 deletions(-) diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 4538a98b6f9d..04eddd7995c3 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -348,7 +348,6 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, char *bu if (urbp->urb->status != -EINPROGRESS) out += sprintf(out, "Status=%d ", urbp->urb->status); - //out += sprintf(out, "Inserttime=%lx ",urbp->inserttime); //out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime); count = 0; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 0c024898cbea..17de9ee910f6 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -437,36 +437,18 @@ static void release_uhci(struct uhci_hcd *uhci) int i; for (i = 0; i < UHCI_NUM_SKELQH; i++) - if (uhci->skelqh[i]) { - uhci_free_qh(uhci, uhci->skelqh[i]); - uhci->skelqh[i] = NULL; - } + uhci_free_qh(uhci, uhci->skelqh[i]); - if (uhci->term_td) { - uhci_free_td(uhci, uhci->term_td); - uhci->term_td = NULL; - } + uhci_free_td(uhci, uhci->term_td); - if (uhci->qh_pool) { - dma_pool_destroy(uhci->qh_pool); - uhci->qh_pool = NULL; - } + dma_pool_destroy(uhci->qh_pool); - if (uhci->td_pool) { - dma_pool_destroy(uhci->td_pool); - uhci->td_pool = NULL; - } + dma_pool_destroy(uhci->td_pool); - if (uhci->fl) { - dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), - uhci->fl, uhci->fl->dma_handle); - uhci->fl = NULL; - } + dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), + uhci->fl, uhci->fl->dma_handle); - if (uhci->dentry) { - debugfs_remove(uhci->dentry); - uhci->dentry = NULL; - } + debugfs_remove(uhci->dentry); } static int uhci_reset(struct usb_hcd *hcd) @@ -690,31 +672,25 @@ static int uhci_start(struct usb_hcd *hcd) * error exits: */ err_alloc_skelqh: - for (i = 0; i < UHCI_NUM_SKELQH; i++) - if (uhci->skelqh[i]) { + for (i = 0; i < UHCI_NUM_SKELQH; i++) { + if (uhci->skelqh[i]) uhci_free_qh(uhci, uhci->skelqh[i]); - uhci->skelqh[i] = NULL; - } + } uhci_free_td(uhci, uhci->term_td); - uhci->term_td = NULL; err_alloc_term_td: dma_pool_destroy(uhci->qh_pool); - uhci->qh_pool = NULL; err_create_qh_pool: dma_pool_destroy(uhci->td_pool); - uhci->td_pool = NULL; err_create_td_pool: dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), uhci->fl, uhci->fl->dma_handle); - uhci->fl = NULL; err_alloc_fl: debugfs_remove(uhci->dentry); - uhci->dentry = NULL; err_create_debug_entry: return retval; diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 282f40b75881..1c161b4f5bcf 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -205,8 +205,6 @@ struct uhci_td { /* Software fields */ dma_addr_t dma_handle; - struct urb *urb; - struct list_head list; /* P: urb->lock */ struct list_head remove_list; /* P: uhci->td_remove_list_lock */ @@ -434,7 +432,6 @@ struct urb_priv { /* a control transfer, retrigger */ /* the status phase */ - unsigned long inserttime; /* In jiffies */ unsigned long fsbrtime; /* In jiffies */ struct list_head queue_list; /* P: uhci->frame_list_lock */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 4e0fbe2c1a9a..d54038211ca6 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -443,7 +443,6 @@ static struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *u memset((void *)urbp, 0, sizeof(*urbp)); - urbp->inserttime = jiffies; urbp->fsbrtime = jiffies; urbp->urb = urb; @@ -462,8 +461,6 @@ static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td) { struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; - td->urb = urb; - list_add_tail(&td->list, &urbp->td_list); } @@ -473,8 +470,6 @@ static void uhci_remove_td_from_urb(struct uhci_td *td) return; list_del_init(&td->list); - - td->urb = NULL; } static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb) -- GitLab From a1d59ce842a35b552f22868404e4e7c923242257 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 16 Sep 2005 14:22:51 -0400 Subject: [PATCH 0772/1519] [PATCH] USB: UHCI: Split apart the physical and logical framelist arrays This patch (as563) splits the physical and logical framelist arrays in uhci-hcd into two separate pieces. This will allow slightly better memory utilization, since each piece is no larger than a single page whereas before the whole thing was a little bigger than two pages. It also allows the logical array to be allocated in non-DMA-coherent memory. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-debug.c | 4 ++-- drivers/usb/host/uhci-hcd.c | 42 ++++++++++++++++++++++------------- drivers/usb/host/uhci-hcd.h | 6 ++++- drivers/usb/host/uhci-q.c | 20 ++++++++--------- 4 files changed, 44 insertions(+), 28 deletions(-) diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 04eddd7995c3..151154df37fa 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -445,11 +445,11 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) out += sprintf(out, "Frame List\n"); for (i = 0; i < UHCI_NUMFRAMES; ++i) { int shown = 0; - td = uhci->fl->frame_cpu[i]; + td = uhci->frame_cpu[i]; if (!td) continue; - if (td->dma_handle != (dma_addr_t)uhci->fl->frame[i]) { + if (td->dma_handle != (dma_addr_t)uhci->frame[i]) { show_frame_num(); out += sprintf(out, " frame list does not match td->dma_handle!\n"); } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 17de9ee910f6..b44094fcd779 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -212,7 +212,7 @@ static void configure_hc(struct uhci_hcd *uhci) outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF); /* Store the frame list base address */ - outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD); + outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD); /* Set the current frame number */ outw(uhci->frame_number, uhci->io_addr + USBFRNUM); @@ -445,8 +445,11 @@ static void release_uhci(struct uhci_hcd *uhci) dma_pool_destroy(uhci->td_pool); - dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), - uhci->fl, uhci->fl->dma_handle); + kfree(uhci->frame_cpu); + + dma_free_coherent(uhci_dev(uhci), + UHCI_NUMFRAMES * sizeof(*uhci->frame), + uhci->frame, uhci->frame_dma_handle); debugfs_remove(uhci->dentry); } @@ -527,7 +530,6 @@ static int uhci_start(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); int retval = -EBUSY; int i; - dma_addr_t dma_handle; struct dentry *dentry; hcd->uses_new_polling = 1; @@ -561,17 +563,23 @@ static int uhci_start(struct usb_hcd *hcd) init_waitqueue_head(&uhci->waitqh); - uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl), - &dma_handle, 0); - if (!uhci->fl) { + uhci->frame = dma_alloc_coherent(uhci_dev(uhci), + UHCI_NUMFRAMES * sizeof(*uhci->frame), + &uhci->frame_dma_handle, 0); + if (!uhci->frame) { dev_err(uhci_dev(uhci), "unable to allocate " "consistent memory for frame list\n"); - goto err_alloc_fl; + goto err_alloc_frame; } + memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame)); - memset((void *)uhci->fl, 0, sizeof(*uhci->fl)); - - uhci->fl->dma_handle = dma_handle; + uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu), + GFP_KERNEL); + if (!uhci->frame_cpu) { + dev_err(uhci_dev(uhci), "unable to allocate " + "memory for frame pointers\n"); + goto err_alloc_frame_cpu; + } uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci), sizeof(struct uhci_td), 16, 0); @@ -654,7 +662,7 @@ static int uhci_start(struct usb_hcd *hcd) irq = 7; /* Only place we don't use the frame list routines */ - uhci->fl->frame[i] = UHCI_PTR_QH | + uhci->frame[i] = UHCI_PTR_QH | cpu_to_le32(uhci->skelqh[irq]->dma_handle); } @@ -686,10 +694,14 @@ static int uhci_start(struct usb_hcd *hcd) dma_pool_destroy(uhci->td_pool); err_create_td_pool: - dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl), - uhci->fl, uhci->fl->dma_handle); + kfree(uhci->frame_cpu); + +err_alloc_frame_cpu: + dma_free_coherent(uhci_dev(uhci), + UHCI_NUMFRAMES * sizeof(*uhci->frame), + uhci->frame, uhci->frame_dma_handle); -err_alloc_fl: +err_alloc_frame: debugfs_remove(uhci->dentry); err_create_debug_entry: diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 1c161b4f5bcf..b04d99df0a0e 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -359,7 +359,11 @@ struct uhci_hcd { struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */ spinlock_t lock; - struct uhci_frame_list *fl; /* P: uhci->lock */ + + dma_addr_t frame_dma_handle; /* Hardware frame list */ + __le32 *frame; /* P: uhci->lock */ + void **frame_cpu; /* CPU's frame list */ + int fsbr; /* Full-speed bandwidth reclamation */ unsigned long fsbrtimeout; /* FSBR delay */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index d54038211ca6..51de06bc438d 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -89,10 +89,10 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, td->frame = framenum; /* Is there a TD already mapped there? */ - if (uhci->fl->frame_cpu[framenum]) { + if (uhci->frame_cpu[framenum]) { struct uhci_td *ftd, *ltd; - ftd = uhci->fl->frame_cpu[framenum]; + ftd = uhci->frame_cpu[framenum]; ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list); list_add_tail(&td->fl_list, &ftd->fl_list); @@ -101,10 +101,10 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, wmb(); ltd->link = cpu_to_le32(td->dma_handle); } else { - td->link = uhci->fl->frame[framenum]; + td->link = uhci->frame[framenum]; wmb(); - uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle); - uhci->fl->frame_cpu[framenum] = td; + uhci->frame[framenum] = cpu_to_le32(td->dma_handle); + uhci->frame_cpu[framenum] = td; } } @@ -114,16 +114,16 @@ static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td) if (td->frame == -1 && list_empty(&td->fl_list)) return; - if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) { + if (td->frame != -1 && uhci->frame_cpu[td->frame] == td) { if (list_empty(&td->fl_list)) { - uhci->fl->frame[td->frame] = td->link; - uhci->fl->frame_cpu[td->frame] = NULL; + uhci->frame[td->frame] = td->link; + uhci->frame_cpu[td->frame] = NULL; } else { struct uhci_td *ntd; ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list); - uhci->fl->frame[td->frame] = cpu_to_le32(ntd->dma_handle); - uhci->fl->frame_cpu[td->frame] = ntd; + uhci->frame[td->frame] = cpu_to_le32(ntd->dma_handle); + uhci->frame_cpu[td->frame] = ntd; } } else { struct uhci_td *ptd; -- GitLab From e9b7bd4ee7f6e3ee002dc72c5211cd97c7186d00 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:30:48 -0700 Subject: [PATCH 0773/1519] [PATCH] one less word in struct device This saves a word from "struct device" ... there's a refcounting mechanism stub that's rather ineffective (the values are never even tested!), which can safely be deleted. With this patch it uses normal device refcounting, so any potential users of the pm_parent mechanism will be more correct. (That mechanism is actually unusable for now though; it does nothing.) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/base/power/main.c | 26 +++----------------------- include/linux/pm.h | 1 - 2 files changed, 3 insertions(+), 24 deletions(-) --- drivers/base/power/main.c | 26 +++----------------------- include/linux/pm.h | 1 - 2 files changed, 3 insertions(+), 24 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 15e6a8f951f1..0d2e101e4f15 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -30,23 +30,6 @@ LIST_HEAD(dpm_off_irq); DECLARE_MUTEX(dpm_sem); DECLARE_MUTEX(dpm_list_sem); -/* - * PM Reference Counting. - */ - -static inline void device_pm_hold(struct device * dev) -{ - if (dev) - atomic_inc(&dev->power.pm_users); -} - -static inline void device_pm_release(struct device * dev) -{ - if (dev) - atomic_dec(&dev->power.pm_users); -} - - /** * device_pm_set_parent - Specify power dependency. * @dev: Device who needs power. @@ -62,10 +45,8 @@ static inline void device_pm_release(struct device * dev) void device_pm_set_parent(struct device * dev, struct device * parent) { - struct device * old_parent = dev->power.pm_parent; - device_pm_release(old_parent); - dev->power.pm_parent = parent; - device_pm_hold(parent); + put_device(dev->power.pm_parent); + dev->power.pm_parent = get_device(parent); } EXPORT_SYMBOL_GPL(device_pm_set_parent); @@ -75,7 +56,6 @@ int device_pm_add(struct device * dev) pr_debug("PM: Adding info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", dev->kobj.name); - atomic_set(&dev->power.pm_users, 0); down(&dpm_list_sem); list_add_tail(&dev->power.entry, &dpm_active); device_pm_set_parent(dev, dev->parent); @@ -91,7 +71,7 @@ void device_pm_remove(struct device * dev) dev->bus ? dev->bus->name : "No Bus", dev->kobj.name); down(&dpm_list_sem); dpm_sysfs_remove(dev); - device_pm_release(dev->power.pm_parent); + put_device(dev->power.pm_parent); list_del_init(&dev->power.entry); up(&dpm_list_sem); } diff --git a/include/linux/pm.h b/include/linux/pm.h index 7897cf500c51..83bae1cbe55b 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -224,7 +224,6 @@ struct dev_pm_info { unsigned should_wakeup:1; pm_message_t prev_state; void * saved_state; - atomic_t pm_users; struct device * pm_parent; struct list_head entry; #endif -- GitLab From 7ff71d6adf81a43505b7cbaa034e4063d3439182 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Thu, 22 Sep 2005 22:31:15 -0700 Subject: [PATCH 0774/1519] [PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-) --- drivers/usb/host/ehci-hcd.c | 537 +++++------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 + 3 files changed, 489 insertions(+), 463 deletions(-) create mode 100644 drivers/usb/host/ehci-pci.c diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 513fccbb8e43..af3c05eb86fc 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -300,44 +300,6 @@ static void ehci_watchdog (unsigned long param) spin_unlock_irqrestore (&ehci->lock, flags); } -#ifdef CONFIG_PCI - -/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/... - * off the controller (maybe it can boot from highspeed USB disks). - */ -static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) -{ - struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); - - /* always say Linux will own the hardware */ - pci_write_config_byte(pdev, where + 3, 1); - - /* maybe wait a while for BIOS to respond */ - if (cap & (1 << 16)) { - int msec = 5000; - - do { - msleep(10); - msec -= 10; - pci_read_config_dword(pdev, where, &cap); - } while ((cap & (1 << 16)) && msec); - if (cap & (1 << 16)) { - ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n", - where, cap); - // some BIOS versions seem buggy... - // return 1; - ehci_warn (ehci, "continuing after BIOS bug...\n"); - /* disable all SMIs, and clear "BIOS owns" flag */ - pci_write_config_dword(pdev, where + 4, 0); - pci_write_config_byte(pdev, where + 2, 0); - } else - ehci_dbg(ehci, "BIOS handoff succeeded\n"); - } - return 0; -} - -#endif - /* Reboot notifiers kick in for silicon on any bus (not just pci, etc). * This forcibly disables dma and IRQs, helping kexec and other cases * where the next system software may expect clean state. @@ -371,156 +333,90 @@ static void ehci_port_power (struct ehci_hcd *ehci, int is_on) msleep(20); } +/*-------------------------------------------------------------------------*/ -/* called by khubd or root hub init threads */ +/* + * ehci_work is called from some interrupts, timers, and so on. + * it calls driver completion functions, after dropping ehci->lock. + */ +static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs) +{ + timer_action_done (ehci, TIMER_IO_WATCHDOG); + if (ehci->reclaim_ready) + end_unlink_async (ehci, regs); + + /* another CPU may drop ehci->lock during a schedule scan while + * it reports urb completions. this flag guards against bogus + * attempts at re-entrant schedule scanning. + */ + if (ehci->scanning) + return; + ehci->scanning = 1; + scan_async (ehci, regs); + if (ehci->next_uframe != -1) + scan_periodic (ehci, regs); + ehci->scanning = 0; + + /* the IO watchdog guards against hardware or driver bugs that + * misplace IRQs, and should let us run completely without IRQs. + * such lossage has been observed on both VT6202 and VT8235. + */ + if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && + (ehci->async->qh_next.ptr != NULL || + ehci->periodic_sched != 0)) + timer_action (ehci, TIMER_IO_WATCHDOG); +} -static int ehci_hc_reset (struct usb_hcd *hcd) +static void ehci_stop (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 temp; - unsigned count = 256/4; - spin_lock_init (&ehci->lock); + ehci_dbg (ehci, "stop\n"); - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase)); - dbg_hcs_params (ehci, "reset"); - dbg_hcc_params (ehci, "reset"); + /* Turn off port power on all root hub ports. */ + ehci_port_power (ehci, 0); - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = readl (&ehci->caps->hcs_params); + /* no more interrupts ... */ + del_timer_sync (&ehci->watchdog); -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + spin_lock_irq(&ehci->lock); + if (HC_IS_RUNNING (hcd->state)) + ehci_quiesce (ehci); - switch (pdev->vendor) { - case PCI_VENDOR_ID_TDI: - if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { - ehci->is_tdi_rh_tt = 1; - tdi_reset (ehci); - } - break; - case PCI_VENDOR_ID_AMD: - /* AMD8111 EHCI doesn't work, according to AMD errata */ - if (pdev->device == 0x7463) { - ehci_info (ehci, "ignoring AMD8111 (errata)\n"); - return -EIO; - } - break; - case PCI_VENDOR_ID_NVIDIA: - /* NVidia reports that certain chips don't handle - * QH, ITD, or SITD addresses above 2GB. (But TD, - * data buffer, and periodic schedule are normal.) - */ - switch (pdev->device) { - case 0x003c: /* MCP04 */ - case 0x005b: /* CK804 */ - case 0x00d8: /* CK8 */ - case 0x00e8: /* CK8S */ - if (pci_set_consistent_dma_mask(pdev, - DMA_31BIT_MASK) < 0) - ehci_warn (ehci, "can't enable NVidia " - "workaround for >2GB RAM\n"); - break; - } - break; - } + ehci_reset (ehci); + writel (0, &ehci->regs->intr_enable); + spin_unlock_irq(&ehci->lock); - /* optional debug port, normally in the first BAR */ - temp = pci_find_capability (pdev, 0x0a); - if (temp) { - pci_read_config_dword(pdev, temp, &temp); - temp >>= 16; - if ((temp & (3 << 13)) == (1 << 13)) { - temp &= 0x1fff; - ehci->debug = hcd->regs + temp; - temp = readl (&ehci->debug->control); - ehci_info (ehci, "debug port %d%s\n", - HCS_DEBUG_PORT(ehci->hcs_params), - (temp & DBGP_ENABLED) - ? " IN USE" - : ""); - if (!(temp & DBGP_ENABLED)) - ehci->debug = NULL; - } - } + /* let companion controllers work when we aren't */ + writel (0, &ehci->regs->configured_flag); + unregister_reboot_notifier (&ehci->reboot_notifier); - temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); - } else - temp = 0; - - /* EHCI 0.96 and later may have "extended capabilities" */ - while (temp && count--) { - u32 cap; - - pci_read_config_dword (to_pci_dev(hcd->self.controller), - temp, &cap); - ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp); - switch (cap & 0xff) { - case 1: /* BIOS/SMM/... handoff */ - if (bios_handoff (ehci, temp, cap) != 0) - return -EOPNOTSUPP; - break; - case 0: /* illegal reserved capability */ - ehci_warn (ehci, "illegal capability!\n"); - cap = 0; - /* FALLTHROUGH */ - default: /* unknown */ - break; - } - temp = (cap >> 8) & 0xff; - } - if (!count) { - ehci_err (ehci, "bogus capabilities ... PCI problems!\n"); - return -EIO; - } - if (ehci_is_TDI(ehci)) - ehci_reset (ehci); -#endif + remove_debug_files (ehci); - ehci_port_power (ehci, 0); + /* root hub is shut down separately (first, when possible) */ + spin_lock_irq (&ehci->lock); + if (ehci->async) + ehci_work (ehci, NULL); + spin_unlock_irq (&ehci->lock); + ehci_mem_cleanup (ehci); - /* at least the Genesys GL880S needs fixup here */ - temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); - temp &= 0x0f; - if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { - ehci_dbg (ehci, "bogus port configuration: " - "cc=%d x pcc=%d < ports=%d\n", - HCS_N_CC(ehci->hcs_params), - HCS_N_PCC(ehci->hcs_params), - HCS_N_PORTS(ehci->hcs_params)); - -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev; - - pdev = to_pci_dev(hcd->self.controller); - switch (pdev->vendor) { - case 0x17a0: /* GENESYS */ - /* GL880S: should be PORTS=2 */ - temp |= (ehci->hcs_params & ~0xf); - ehci->hcs_params = temp; - break; - case PCI_VENDOR_ID_NVIDIA: - /* NF4: should be PCC=10 */ - break; - } - } +#ifdef EHCI_STATS + ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", + ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, + ehci->stats.lost_iaa); + ehci_dbg (ehci, "complete %ld unlink %ld\n", + ehci->stats.complete, ehci->stats.unlink); #endif - } - /* force HC to halt state */ - return ehci_halt (ehci); + dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status)); } -static int ehci_start (struct usb_hcd *hcd) +static int ehci_run (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; int retval; u32 hcc_params; - u8 sbrn = 0; int first; /* skip some things on restart paths */ @@ -559,27 +455,6 @@ static int ehci_start (struct usb_hcd *hcd) } writel (ehci->periodic_dma, &ehci->regs->frame_list); -#ifdef CONFIG_PCI - if (hcd->self.controller->bus == &pci_bus_type) { - struct pci_dev *pdev; - u16 port_wake; - - pdev = to_pci_dev(hcd->self.controller); - - /* Serial Bus Release Number is at PCI 0x60 offset */ - pci_read_config_byte(pdev, 0x60, &sbrn); - - /* port wake capability, reported by boot firmware */ - pci_read_config_word(pdev, 0x62, &port_wake); - hcd->can_wakeup = (port_wake & 1) != 0; - - /* help hc dma work well with cachelines */ - retval = pci_set_mwi(pdev); - if (retval) - ehci_dbg(ehci, "unable to enable MWI - not fatal.\n"); - } -#endif - /* * dedicate a qh for the async ring head, since we couldn't unlink * a 'real' qh without stopping the async schedule [4.8]. use it @@ -675,7 +550,7 @@ static int ehci_start (struct usb_hcd *hcd) temp = HC_VERSION(readl (&ehci->caps->hc_capbase)); ehci_info (ehci, "USB %x.%x %s, EHCI %x.%02x, driver %s\n", - ((sbrn & 0xf0)>>4), (sbrn & 0x0f), + ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), first ? "initialized" : "restarted", temp >> 8, temp & 0xff, DRIVER_VERSION); @@ -687,188 +562,6 @@ static int ehci_start (struct usb_hcd *hcd) return 0; } -/* always called by thread; normally rmmod */ - -static void ehci_stop (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - - ehci_dbg (ehci, "stop\n"); - - /* Turn off port power on all root hub ports. */ - ehci_port_power (ehci, 0); - - /* no more interrupts ... */ - del_timer_sync (&ehci->watchdog); - - spin_lock_irq(&ehci->lock); - if (HC_IS_RUNNING (hcd->state)) - ehci_quiesce (ehci); - - ehci_reset (ehci); - writel (0, &ehci->regs->intr_enable); - spin_unlock_irq(&ehci->lock); - - /* let companion controllers work when we aren't */ - writel (0, &ehci->regs->configured_flag); - unregister_reboot_notifier (&ehci->reboot_notifier); - - remove_debug_files (ehci); - - /* root hub is shut down separately (first, when possible) */ - spin_lock_irq (&ehci->lock); - if (ehci->async) - ehci_work (ehci, NULL); - spin_unlock_irq (&ehci->lock); - ehci_mem_cleanup (ehci); - -#ifdef EHCI_STATS - ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", - ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, - ehci->stats.lost_iaa); - ehci_dbg (ehci, "complete %ld unlink %ld\n", - ehci->stats.complete, ehci->stats.unlink); -#endif - - dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status)); -} - -static int ehci_get_frame (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size; -} - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_PM - -/* suspend/resume, section 4.3 */ - -/* These routines rely on the bus (pci, platform, etc) - * to handle powerdown and wakeup, and currently also on - * transceivers that don't need any software attention to set up - * the right sort of wakeup. - */ - -static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - - if (time_before (jiffies, ehci->next_statechange)) - msleep (100); - -#ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub); -#else - usb_lock_device (hcd->self.root_hub); - (void) ehci_hub_suspend (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - - // save (PCI) FLADJ in case of Vaux power loss - // ... we'd only use it to handle clock skew - - return 0; -} - -static int ehci_resume (struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci (hcd); - unsigned port; - struct usb_device *root = hcd->self.root_hub; - int retval = -EINVAL; - - // maybe restore (PCI) FLADJ - - if (time_before (jiffies, ehci->next_statechange)) - msleep (100); - - /* If any port is suspended (or owned by the companion), - * we know we can/must resume the HC (and mustn't reset it). - */ - for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) { - u32 status; - port--; - status = readl (&ehci->regs->port_status [port]); - if (!(status & PORT_POWER)) - continue; - if (status & (PORT_SUSPEND | PORT_OWNER)) { - down (&hcd->self.root_hub->serialize); - retval = ehci_hub_resume (hcd); - up (&hcd->self.root_hub->serialize); - break; - } - if (!root->children [port]) - continue; - dbg_port (ehci, __FUNCTION__, port + 1, status); - usb_set_device_state (root->children[port], - USB_STATE_NOTATTACHED); - } - - /* Else reset, to cope with power loss or flush-to-storage - * style "resume" having activated BIOS during reboot. - */ - if (port == 0) { - (void) ehci_halt (ehci); - (void) ehci_reset (ehci); - (void) ehci_hc_reset (hcd); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq (&ehci->lock); - if (ehci->reclaim) - ehci->reclaim_ready = 1; - ehci_work (ehci, NULL); - spin_unlock_irq (&ehci->lock); - - /* restart; khubd will disconnect devices */ - retval = ehci_start (hcd); - - /* here we "know" root ports should always stay powered; - * but some controllers may lose all power. - */ - ehci_port_power (ehci, 1); - } - - return retval; -} - -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * ehci_work is called from some interrupts, timers, and so on. - * it calls driver completion functions, after dropping ehci->lock. - */ -static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs) -{ - timer_action_done (ehci, TIMER_IO_WATCHDOG); - if (ehci->reclaim_ready) - end_unlink_async (ehci, regs); - - /* another CPU may drop ehci->lock during a schedule scan while - * it reports urb completions. this flag guards against bogus - * attempts at re-entrant schedule scanning. - */ - if (ehci->scanning) - return; - ehci->scanning = 1; - scan_async (ehci, regs); - if (ehci->next_uframe != -1) - scan_periodic (ehci, regs); - ehci->scanning = 0; - - /* the IO watchdog guards against hardware or driver bugs that - * misplace IRQs, and should let us run completely without IRQs. - * such lossage has been observed on both VT6202 and VT8235. - */ - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && - (ehci->async->qh_next.ptr != NULL || - ehci->periodic_sched != 0)) - timer_action (ehci, TIMER_IO_WATCHDOG); -} - /*-------------------------------------------------------------------------*/ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) @@ -1179,106 +872,24 @@ ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep) return; } -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ehci_driver = { - .description = hcd_name, - .product_desc = "EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_hc_reset, - .start = ehci_start, -#ifdef CONFIG_PM - .suspend = ehci_suspend, - .resume = ehci_resume, -#endif - .stop = ehci_stop, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .hub_suspend = ehci_hub_suspend, - .hub_resume = ehci_hub_resume, -}; +static int ehci_get_frame (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size; +} /*-------------------------------------------------------------------------*/ -/* EHCI 1.0 doesn't require PCI */ - -#ifdef CONFIG_PCI - -/* PCI driver selection metadata; PCI hotplugging uses this */ -static const struct pci_device_id pci_ids [] = { { - /* handle any USB 2.0 EHCI controller */ - PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0), - .driver_data = (unsigned long) &ehci_driver, - }, - { /* end: all zeroes */ } -}; -MODULE_DEVICE_TABLE (pci, pci_ids); - -/* pci driver glue; this is a "new style" PCI driver module */ -static struct pci_driver ehci_pci_driver = { - .name = (char *) hcd_name, - .id_table = pci_ids, - - .probe = usb_hcd_pci_probe, - .remove = usb_hcd_pci_remove, - -#ifdef CONFIG_PM - .suspend = usb_hcd_pci_suspend, - .resume = usb_hcd_pci_resume, -#endif -}; - -#endif /* PCI */ - - #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC MODULE_DESCRIPTION (DRIVER_INFO); MODULE_AUTHOR (DRIVER_AUTHOR); MODULE_LICENSE ("GPL"); -static int __init init (void) -{ - if (usb_disabled()) - return -ENODEV; - - pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", - hcd_name, - sizeof (struct ehci_qh), sizeof (struct ehci_qtd), - sizeof (struct ehci_itd), sizeof (struct ehci_sitd)); - - return pci_register_driver (&ehci_pci_driver); -} -module_init (init); +#ifdef CONFIG_PCI +#include "ehci-pci.c" +#endif -static void __exit cleanup (void) -{ - pci_unregister_driver (&ehci_pci_driver); -} -module_exit (cleanup); +#if !defined(CONFIG_PCI) +#error "missing bus glue for ehci-hcd" +#endif diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c new file mode 100644 index 000000000000..66ebf75b2037 --- /dev/null +++ b/drivers/usb/host/ehci-pci.c @@ -0,0 +1,414 @@ +/* + * EHCI HCD (Host Controller Driver) PCI Bus Glue. + * + * Copyright (c) 2000-2004 by David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CONFIG_PCI +#error "This file is PCI bus glue. CONFIG_PCI must be defined." +#endif + +/*-------------------------------------------------------------------------*/ + +/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/... + * off the controller (maybe it can boot from highspeed USB disks). + */ +static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap) +{ + struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); + + /* always say Linux will own the hardware */ + pci_write_config_byte(pdev, where + 3, 1); + + /* maybe wait a while for BIOS to respond */ + if (cap & (1 << 16)) { + int msec = 5000; + + do { + msleep(10); + msec -= 10; + pci_read_config_dword(pdev, where, &cap); + } while ((cap & (1 << 16)) && msec); + if (cap & (1 << 16)) { + ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n", + where, cap); + // some BIOS versions seem buggy... + // return 1; + ehci_warn (ehci, "continuing after BIOS bug...\n"); + /* disable all SMIs, and clear "BIOS owns" flag */ + pci_write_config_dword(pdev, where + 4, 0); + pci_write_config_byte(pdev, where + 2, 0); + } else + ehci_dbg(ehci, "BIOS handoff succeeded\n"); + } + return 0; +} + +/* called by khubd or root hub init threads */ +static int ehci_pci_reset (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + u32 temp; + unsigned count = 256/4; + + spin_lock_init (&ehci->lock); + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase)); + dbg_hcs_params (ehci, "reset"); + dbg_hcc_params (ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl (&ehci->caps->hcs_params); + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + switch (pdev->vendor) { + case PCI_VENDOR_ID_TDI: + if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { + ehci->is_tdi_rh_tt = 1; + tdi_reset (ehci); + } + break; + case PCI_VENDOR_ID_AMD: + /* AMD8111 EHCI doesn't work, according to AMD errata */ + if (pdev->device == 0x7463) { + ehci_info (ehci, "ignoring AMD8111 (errata)\n"); + return -EIO; + } + break; + case PCI_VENDOR_ID_NVIDIA: + /* NVidia reports that certain chips don't handle + * QH, ITD, or SITD addresses above 2GB. (But TD, + * data buffer, and periodic schedule are normal.) + */ + switch (pdev->device) { + case 0x003c: /* MCP04 */ + case 0x005b: /* CK804 */ + case 0x00d8: /* CK8 */ + case 0x00e8: /* CK8S */ + if (pci_set_consistent_dma_mask(pdev, + DMA_31BIT_MASK) < 0) + ehci_warn (ehci, "can't enable NVidia " + "workaround for >2GB RAM\n"); + break; + } + break; + } + + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability (pdev, 0x0a); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if ((temp & (3 << 13)) == (1 << 13)) { + temp &= 0x1fff; + ehci->debug = hcd->regs + temp; + temp = readl (&ehci->debug->control); + ehci_info (ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(ehci->hcs_params), + (temp & DBGP_ENABLED) + ? " IN USE" + : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + + temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); + } else + temp = 0; + + /* EHCI 0.96 and later may have "extended capabilities" */ + while (temp && count--) { + u32 cap; + + pci_read_config_dword (to_pci_dev(hcd->self.controller), + temp, &cap); + ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp); + switch (cap & 0xff) { + case 1: /* BIOS/SMM/... handoff */ + if (bios_handoff (ehci, temp, cap) != 0) + return -EOPNOTSUPP; + break; + case 0: /* illegal reserved capability */ + ehci_warn (ehci, "illegal capability!\n"); + cap = 0; + /* FALLTHROUGH */ + default: /* unknown */ + break; + } + temp = (cap >> 8) & 0xff; + } + if (!count) { + ehci_err (ehci, "bogus capabilities ... PCI problems!\n"); + return -EIO; + } + if (ehci_is_TDI(ehci)) + ehci_reset (ehci); + + ehci_port_power (ehci, 0); + + /* at least the Genesys GL880S needs fixup here */ + temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); + temp &= 0x0f; + if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { + ehci_dbg (ehci, "bogus port configuration: " + "cc=%d x pcc=%d < ports=%d\n", + HCS_N_CC(ehci->hcs_params), + HCS_N_PCC(ehci->hcs_params), + HCS_N_PORTS(ehci->hcs_params)); + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev; + + pdev = to_pci_dev(hcd->self.controller); + switch (pdev->vendor) { + case 0x17a0: /* GENESYS */ + /* GL880S: should be PORTS=2 */ + temp |= (ehci->hcs_params & ~0xf); + ehci->hcs_params = temp; + break; + case PCI_VENDOR_ID_NVIDIA: + /* NF4: should be PCC=10 */ + break; + } + } + } + + /* force HC to halt state */ + return ehci_halt (ehci); +} + +static int ehci_pci_start (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + int result = 0; + + if (hcd->self.controller->bus == &pci_bus_type) { + struct pci_dev *pdev; + u16 port_wake; + + pdev = to_pci_dev(hcd->self.controller); + + /* Serial Bus Release Number is at PCI 0x60 offset */ + pci_read_config_byte(pdev, 0x60, &ehci->sbrn); + + /* port wake capability, reported by boot firmware */ + pci_read_config_word(pdev, 0x62, &port_wake); + hcd->can_wakeup = (port_wake & 1) != 0; + + /* help hc dma work well with cachelines */ + result = pci_set_mwi(pdev); + if (result) + ehci_dbg(ehci, "unable to enable MWI - not fatal.\n"); + } + + return ehci_run (hcd); +} + +/* always called by thread; normally rmmod */ + +static void ehci_pci_stop (struct usb_hcd *hcd) +{ + ehci_stop (hcd); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* suspend/resume, section 4.3 */ + +/* These routines rely on the bus (pci, platform, etc) + * to handle powerdown and wakeup, and currently also on + * transceivers that don't need any software attention to set up + * the right sort of wakeup. + */ + +static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + + if (time_before (jiffies, ehci->next_statechange)) + msleep (100); + +#ifdef CONFIG_USB_SUSPEND + (void) usb_suspend_device (hcd->self.root_hub); +#else + usb_lock_device (hcd->self.root_hub); + (void) ehci_hub_suspend (hcd); + usb_unlock_device (hcd->self.root_hub); +#endif + + // save (PCI) FLADJ in case of Vaux power loss + // ... we'd only use it to handle clock skew + + return 0; +} + +static int ehci_pci_resume (struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci (hcd); + unsigned port; + struct usb_device *root = hcd->self.root_hub; + int retval = -EINVAL; + + // maybe restore (PCI) FLADJ + + if (time_before (jiffies, ehci->next_statechange)) + msleep (100); + + /* If any port is suspended (or owned by the companion), + * we know we can/must resume the HC (and mustn't reset it). + */ + for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) { + u32 status; + port--; + status = readl (&ehci->regs->port_status [port]); + if (!(status & PORT_POWER)) + continue; + if (status & (PORT_SUSPEND | PORT_OWNER)) { + down (&hcd->self.root_hub->serialize); + retval = ehci_hub_resume (hcd); + up (&hcd->self.root_hub->serialize); + break; + } + if (!root->children [port]) + continue; + dbg_port (ehci, __FUNCTION__, port + 1, status); + usb_set_device_state (root->children[port], + USB_STATE_NOTATTACHED); + } + + /* Else reset, to cope with power loss or flush-to-storage + * style "resume" having activated BIOS during reboot. + */ + if (port == 0) { + (void) ehci_halt (ehci); + (void) ehci_reset (ehci); + (void) ehci_pci_reset (hcd); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq (&ehci->lock); + if (ehci->reclaim) + ehci->reclaim_ready = 1; + ehci_work (ehci, NULL); + spin_unlock_irq (&ehci->lock); + + /* restart; khubd will disconnect devices */ + retval = ehci_run (hcd); + + /* here we "know" root ports should always stay powered; + * but some controllers may lose all power. + */ + ehci_port_power (ehci, 1); + } + + return retval; +} +#endif + +static const struct hc_driver ehci_pci_hc_driver = { + .description = hcd_name, + .product_desc = "EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_pci_reset, + .start = ehci_pci_start, +#ifdef CONFIG_PM + .suspend = ehci_pci_suspend, + .resume = ehci_pci_resume, +#endif + .stop = ehci_pci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .hub_suspend = ehci_hub_suspend, + .hub_resume = ehci_hub_resume, +}; + +/*-------------------------------------------------------------------------*/ + +/* PCI driver selection metadata; PCI hotplugging uses this */ +static const struct pci_device_id pci_ids [] = { { + /* handle any USB 2.0 EHCI controller */ + PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0), + .driver_data = (unsigned long) &ehci_pci_hc_driver, + }, + { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE (pci, pci_ids); + +/* pci driver glue; this is a "new style" PCI driver module */ +static struct pci_driver ehci_pci_driver = { + .name = (char *) hcd_name, + .id_table = pci_ids, + + .probe = usb_hcd_pci_probe, + .remove = usb_hcd_pci_remove, + +#ifdef CONFIG_PM + .suspend = usb_hcd_pci_suspend, + .resume = usb_hcd_pci_resume, +#endif +}; + +static int __init ehci_hcd_pci_init (void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", + hcd_name, + sizeof (struct ehci_qh), sizeof (struct ehci_qtd), + sizeof (struct ehci_itd), sizeof (struct ehci_sitd)); + + return pci_register_driver (&ehci_pci_driver); +} +module_init (ehci_hcd_pci_init); + +static void __exit ehci_hcd_pci_cleanup (void) +{ + pci_unregister_driver (&ehci_pci_driver); +} +module_exit (ehci_hcd_pci_cleanup); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index f34a0516d35f..18e257c2bdb5 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -97,6 +97,7 @@ struct ehci_hcd { /* one per controller */ #else # define COUNT(x) do {} while (0) #endif + u8 sbrn; /* packed release number */ }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ -- GitLab From 9293677af3dace2645dec0d0808efa02d36bf47b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:32:11 -0700 Subject: [PATCH 0775/1519] [PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-) --- drivers/usb/core/hcd.c | 42 +++++++++++++++++++++------------ drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 + drivers/usb/host/ohci-s3c2410.c | 1 + drivers/usb/host/ohci-sa1111.c | 1 + 6 files changed, 40 insertions(+), 15 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 5e8ade07d7f9..375382f9d671 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1431,28 +1431,44 @@ hcd_endpoint_disable (struct usb_device *udev, struct usb_host_endpoint *ep) /*-------------------------------------------------------------------------*/ -/* FIXME make this #ifdef CONFIG_PM ... update root hubs, retest */ - -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM static int hcd_hub_suspend (struct usb_bus *bus) { struct usb_hcd *hcd; + int status; hcd = container_of (bus, struct usb_hcd, self); - if (hcd->driver->hub_suspend) - return hcd->driver->hub_suspend (hcd); - return 0; + if (!hcd->driver->hub_suspend) + return -ENOENT; + hcd->state = HC_STATE_QUIESCING; + status = hcd->driver->hub_suspend (hcd); + if (status == 0) + hcd->state = HC_STATE_SUSPENDED; + else + dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n", + "suspend", status); + return status; } static int hcd_hub_resume (struct usb_bus *bus) { struct usb_hcd *hcd; + int status; hcd = container_of (bus, struct usb_hcd, self); - if (hcd->driver->hub_resume) - return hcd->driver->hub_resume (hcd); - return 0; + if (!hcd->driver->hub_resume) + return -ENOENT; + hcd->state = HC_STATE_RESUMING; + status = hcd->driver->hub_resume (hcd); + if (status == 0) + hcd->state = HC_STATE_RUNNING; + else { + dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n", + "resume", status); + usb_hc_died(hcd); + } + return status; } /** @@ -1473,13 +1489,9 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) usb_resume_root_hub (hcd->self.root_hub); spin_unlock_irqrestore (&hcd_root_hub_lock, flags); } +EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); -#else -void usb_hcd_resume_root_hub (struct usb_hcd *hcd) -{ -} #endif -EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); /*-------------------------------------------------------------------------*/ @@ -1532,7 +1544,7 @@ static struct usb_operations usb_hcd_operations = { .buffer_alloc = hcd_buffer_alloc, .buffer_free = hcd_buffer_free, .disable = hcd_endpoint_disable, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM .hub_suspend = hcd_hub_suspend, .hub_resume = hcd_hub_resume, #endif diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 3981bf15c8c7..550d67a554f6 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -214,6 +214,11 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .hub_suspend = ohci_hub_suspend, + .hub_resume = ohci_hub_resume, +#endif + .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 859aca7be753..71d975ae78bd 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -193,6 +193,11 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .hub_suspend = ohci_hub_suspend, + .hub_resume = ohci_hub_resume, +#endif + .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 986c4f656e22..2e7b48502a3d 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -282,6 +282,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif + .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 8cf12b2be2a3..922e2a6f46ef 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -452,6 +452,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif + .start_port_reset = ohci_start_port_reset, }; /* device driver */ diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 7dd1f410b7f1..13324b7f9c59 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -239,6 +239,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = { .hub_suspend = ohci_hub_suspend, .hub_resume = ohci_hub_resume, #endif + .start_port_reset = ohci_start_port_reset, }; /*-------------------------------------------------------------------------*/ -- GitLab From 979d5199fee9e80290ddeb532e5993bd15506712 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:32:24 -0700 Subject: [PATCH 0776/1519] [PATCH] root hub changes (lesser half) This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-) --- drivers/base/power/runtime.c | 1 + drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++---- drivers/usb/core/hcd.h | 1 + drivers/usb/core/hub.c | 45 ++++++++++++++++++++----- drivers/usb/core/usb.c | 20 +++++++---- drivers/usb/core/usb.h | 1 + 6 files changed, 111 insertions(+), 21 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index e8f0519f5dfa..adbc3148c039 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -36,6 +36,7 @@ void dpm_runtime_resume(struct device * dev) runtime_resume(dev); up(&dpm_sem); } +EXPORT_SYMBOL(dpm_runtime_resume); /** diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 375382f9d671..de59bb515315 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1143,10 +1143,20 @@ static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags) else switch (hcd->state) { case HC_STATE_RUNNING: case HC_STATE_RESUMING: +doit: usb_get_dev (urb->dev); list_add_tail (&urb->urb_list, &ep->urb_list); status = 0; break; + case HC_STATE_SUSPENDED: + /* HC upstream links (register access, wakeup signaling) can work + * even when the downstream links (and DMA etc) are quiesced; let + * usbcore talk to the root hub. + */ + if (hcd->self.controller->power.power_state.event == PM_EVENT_ON + && urb->dev->parent == NULL) + goto doit; + /* FALL THROUGH */ default: status = -ESHUTDOWN; break; @@ -1294,12 +1304,6 @@ static int hcd_unlink_urb (struct urb *urb, int status) goto done; } - /* running ~= hc unlink handshake works (irq, timer, etc) - * halted ~= no unlink handshake is needed - * suspended, resuming == should never happen - */ - WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT); - /* insist the urb is still queued */ list_for_each(tmp, &ep->urb_list) { if (tmp == &urb->urb_list) @@ -1459,6 +1463,8 @@ static int hcd_hub_resume (struct usb_bus *bus) hcd = container_of (bus, struct usb_hcd, self); if (!hcd->driver->hub_resume) return -ENOENT; + if (hcd->state == HC_STATE_RUNNING) + return 0; hcd->state = HC_STATE_RESUMING; status = hcd->driver->hub_resume (hcd); if (status == 0) @@ -1471,6 +1477,50 @@ static int hcd_hub_resume (struct usb_bus *bus) return status; } +/* + * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports + * @hcd: host controller for this root hub + * + * This call arranges that usb_hcd_resume_root_hub() is safe to call later; + * that the HCD's root hub polling is deactivated; and that the root's hub + * driver is suspended. HCDs may call this to autosuspend when their root + * hub's downstream ports are all inactive: unpowered, disconnected, + * disabled, or suspended. + * + * The HCD will autoresume on device connect change detection (using SRP + * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling + * from any ports that are suspended (if that is enabled). In most cases, + * overcurrent signaling (on powered ports) will also start autoresume. + * + * Always called with IRQs blocked. + */ +void usb_hcd_suspend_root_hub (struct usb_hcd *hcd) +{ + struct urb *urb; + + spin_lock (&hcd_root_hub_lock); + usb_suspend_root_hub (hcd->self.root_hub); + + /* force status urb to complete/unlink while suspended */ + if (hcd->status_urb) { + urb = hcd->status_urb; + urb->status = -ECONNRESET; + urb->hcpriv = NULL; + urb->actual_length = 0; + + del_timer (&hcd->rh_timer); + hcd->poll_pending = 0; + hcd->status_urb = NULL; + } else + urb = NULL; + spin_unlock (&hcd_root_hub_lock); + hcd->state = HC_STATE_SUSPENDED; + + if (urb) + usb_hcd_giveback_urb (hcd, urb, NULL); +} +EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub); + /** * usb_hcd_resume_root_hub - called by HCD to resume its root hub * @hcd: host controller for this root hub @@ -1478,7 +1528,7 @@ static int hcd_hub_resume (struct usb_bus *bus) * The USB host controller calls this function when its root hub is * suspended (with the remote wakeup feature enabled) and a remote * wakeup request is received. It queues a request for khubd to - * resume the root hub. + * resume the root hub (that is, manage its downstream ports again). */ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) { diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 1f1ed6211af8..eb21f13c5c74 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -355,6 +355,7 @@ extern long usb_calc_bus_time (int speed, int is_input, extern struct usb_bus *usb_alloc_bus (struct usb_operations *); +extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); extern void usb_set_device_state(struct usb_device *udev, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 660064466791..3c8d8d1f993c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -449,11 +449,18 @@ static void hub_power_on(struct usb_hub *hub) msleep(max(pgood_delay, (unsigned) 100)); } -static void hub_quiesce(struct usb_hub *hub) +static inline void __hub_quiesce(struct usb_hub *hub) { - /* stop khubd and related activity */ + /* (nonblocking) khubd and related activity won't re-trigger */ hub->quiescing = 1; hub->activating = 0; + hub->resume_root_hub = 0; +} + +static void hub_quiesce(struct usb_hub *hub) +{ + /* (blocking) stop khubd and related activity */ + __hub_quiesce(hub); usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work(&hub->leds); @@ -467,6 +474,7 @@ static void hub_activate(struct usb_hub *hub) hub->quiescing = 0; hub->activating = 1; + hub->resume_root_hub = 0; status = usb_submit_urb(hub->urb, GFP_NOIO); if (status < 0) dev_err(hub->intfdev, "activate --> %d\n", status); @@ -1959,6 +1967,18 @@ static int hub_resume(struct usb_interface *intf) return 0; } +void usb_suspend_root_hub(struct usb_device *hdev) +{ + struct usb_hub *hub = hdev_to_hub(hdev); + + /* This also makes any led blinker stop retriggering. We're called + * from irq, so the blinker might still be scheduled. Caller promises + * that the root hub status URB will be canceled. + */ + __hub_quiesce(hub); + mark_quiesced(to_usb_interface(hub->intfdev)); +} + void usb_resume_root_hub(struct usb_device *hdev) { struct usb_hub *hub = hdev_to_hub(hdev); @@ -2616,21 +2636,30 @@ static void hub_events(void) intf = to_usb_interface(hub->intfdev); hub_dev = &intf->dev; - dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n", + i = hub->resume_root_hub; + + dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n", hdev->state, hub->descriptor ? hub->descriptor->bNbrPorts : 0, /* NOTE: expects max 15 ports... */ (u16) hub->change_bits[0], - (u16) hub->event_bits[0]); + (u16) hub->event_bits[0], + i ? ", resume root" : ""); usb_get_intf(intf); - i = hub->resume_root_hub; spin_unlock_irq(&hub_event_lock); - /* Is this is a root hub wanting to be resumed? */ - if (i) - usb_resume_device(hdev); + /* Is this is a root hub wanting to reactivate the downstream + * ports? If so, be sure the interface resumes even if its + * stub "device" node was never suspended. + */ + if (i) { + extern void dpm_runtime_resume(struct device *); + + dpm_runtime_resume(&hdev->dev); + dpm_runtime_resume(&intf->dev); + } /* Lock the device, then check to see if we were * disconnected while waiting for the lock to succeed. */ diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index e89dbd43e952..2493e7d9f5b3 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1427,6 +1427,7 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) /* USB devices enter SUSPEND state through their hubs, but can be * marked for FREEZE as soon as their children are already idled. + * But those semantics are useless, so we equate the two (sigh). */ if (dev->driver == &usb_generic_driver) { if (dev->power.power_state.event == message.event) @@ -1435,10 +1436,6 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) status = device_for_each_child(dev, NULL, verify_suspended); if (status) return status; - if (message.event == PM_EVENT_FREEZE) { - dev->power.power_state = message; - return 0; - } return usb_suspend_device (to_usb_device(dev)); } @@ -1471,14 +1468,22 @@ static int usb_generic_resume(struct device *dev) { struct usb_interface *intf; struct usb_driver *driver; + struct usb_device *udev; int status; if (dev->power.power_state.event == PM_EVENT_ON) return 0; + /* mark things as "on" immediately, no matter what errors crop up */ + dev->power.power_state.event = PM_EVENT_ON; + /* devices resume through their hubs */ - if (dev->driver == &usb_generic_driver) + if (dev->driver == &usb_generic_driver) { + udev = to_usb_device(dev); + if (udev->state == USB_STATE_NOTATTACHED) + return 0; return usb_resume_device (to_usb_device(dev)); + } if ((dev->driver == NULL) || (dev->driver_data == &usb_generic_driver_data)) @@ -1487,11 +1492,14 @@ static int usb_generic_resume(struct device *dev) intf = to_usb_interface(dev); driver = to_usb_driver(dev->driver); + udev = interface_to_usbdev(intf); + if (udev->state == USB_STATE_NOTATTACHED) + return 0; + /* if driver was suspended, it has a resume method; * however, sysfs can wrongly mark things as suspended * (on the "no suspend method" FIXME path above) */ - mark_active(intf); if (driver->resume) { status = driver->resume(intf); if (status) { diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 3741a990403e..7add46ecc6a2 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -19,6 +19,7 @@ extern void usb_lock_all_devices(void); extern void usb_unlock_all_devices(void); extern void usb_kick_khubd(struct usb_device *dev); +extern void usb_suspend_root_hub(struct usb_device *hdev); extern void usb_resume_root_hub(struct usb_device *dev); extern int usb_hub_init(void); -- GitLab From f3f3253d644d36a2ea5464005a9c2cf28804d200 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:37:29 -0700 Subject: [PATCH 0777/1519] [PATCH] root hub updates (greater half) This patch associates hub suspend and resume logic (including for root hubs) with CONFIG_PM -- instead of CONFIG_USB_SUSPEND as before -- thereby unifying two troublesome versions of suspend logic into just one. It'll be easier to keep things right from now on. - Now usbcore _always_ calls hcd->hub_suspend as needed, instead of only when USB_SUSPEND is enabled: * Those root hub methods are now called from hub suspend/resume; no more skipping between layers during device suspend/resume; * It now handles cases allowed by sysfs or autosuspended root hubs, by forcing the hub interface to resume too. - All devices, including virtual root hubs, now get the same treatment on their resume paths ... including re-activating all their interfaces. Plus it gets rid of those stub copies of usb_{suspend,resume}_device(), and updates the Kconfig to match the new definition of USB_SUSPEND: it provides (a) selective suspend, downstream from hubs; and (b) remote wakeup, upstream from any device configuration which supports it. This calls for minor followup patches for most HCDs (and their PCI glue). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++++++---------------------- 2 files changed, 97 insertions(+), 77 deletions(-) --- drivers/usb/core/Kconfig | 11 ++- drivers/usb/core/hub.c | 163 +++++++++++++++++++++------------------ 2 files changed, 97 insertions(+), 77 deletions(-) diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 1a9ff6184943..ff03184da403 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -61,14 +61,17 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. config USB_SUSPEND - bool "USB suspend/resume (EXPERIMENTAL)" + bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)" depends on USB && PM && EXPERIMENTAL help If you say Y here, you can use driver calls or the sysfs "power/state" file to suspend or resume individual USB - peripherals. There are many related features, such as - remote wakeup and driver-specific suspend processing, that - may not yet work as expected. + peripherals. + + Also, USB "remote wakeup" signaling is supported, whereby some + USB devices (like keyboards and network adapters) can wake up + their parent hub. That wakeup cascades up the USB tree, and + could wake the system from states like suspend-to-RAM. If you are unsure about this, say N here. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3c8d8d1f993c..6a601a4547e7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1612,7 +1612,7 @@ static int hub_port_suspend(struct usb_hub *hub, int port1, */ static int __usb_suspend_device (struct usb_device *udev, int port1) { - int status; + int status = 0; /* caller owns the udev device lock */ if (port1 < 0) @@ -1638,21 +1638,10 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) } } - /* "global suspend" of the HC-to-USB interface (root hub), or - * "selective suspend" of just one hub-device link. + /* we only change a device's upstream USB link. + * root hubs have no upstream USB link. */ - if (!udev->parent) { - struct usb_bus *bus = udev->bus; - if (bus && bus->op->hub_suspend) { - status = bus->op->hub_suspend (bus); - if (status == 0) { - dev_dbg(&udev->dev, "usb suspend\n"); - usb_set_device_state(udev, - USB_STATE_SUSPENDED); - } - } else - status = -EOPNOTSUPP; - } else + if (udev->parent) status = hub_port_suspend(hdev_to_hub(udev->parent), port1, udev); @@ -1661,6 +1650,8 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) return status; } +#endif + /** * usb_suspend_device - suspend a usb device * @udev: device that's no longer in active use @@ -1683,6 +1674,7 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) */ int usb_suspend_device(struct usb_device *udev) { +#ifdef CONFIG_USB_SUSPEND int port1, status; port1 = locktree(udev); @@ -1692,8 +1684,14 @@ int usb_suspend_device(struct usb_device *udev) status = __usb_suspend_device(udev, port1); usb_unlock_device(udev); return status; +#else + /* NOTE: udev->state unchanged, it's not lying ... */ + udev->dev.power.power_state = PMSG_SUSPEND; + return 0; +#endif } + /* * If the USB "suspend" state is in use (rather than "global suspend"), * many devices will be individually taken out of suspend state using @@ -1702,13 +1700,13 @@ int usb_suspend_device(struct usb_device *udev) * resume (by host) or remote wakeup (by device) ... now see what changed * in the tree that's rooted at this device. */ -static int finish_port_resume(struct usb_device *udev) +static int finish_device_resume(struct usb_device *udev) { int status; u16 devstatus; /* caller owns the udev device lock */ - dev_dbg(&udev->dev, "usb resume\n"); + dev_dbg(&udev->dev, "finish resume\n"); /* usb ch9 identifies four variants of SUSPENDED, based on what * state the device resumes to. Linux currently won't see the @@ -1718,7 +1716,6 @@ static int finish_port_resume(struct usb_device *udev) usb_set_device_state(udev, udev->actconfig ? USB_STATE_CONFIGURED : USB_STATE_ADDRESS); - udev->dev.power.power_state = PMSG_ON; /* 10.5.4.5 says be sure devices in the tree are still there. * For now let's assume the device didn't go crazy on resume, @@ -1734,7 +1731,8 @@ static int finish_port_resume(struct usb_device *udev) int (*resume)(struct device *); le16_to_cpus(&devstatus); - if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { + if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP) + && udev->parent) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_CLEAR_FEATURE, @@ -1764,6 +1762,8 @@ static int finish_port_resume(struct usb_device *udev) return status; } +#ifdef CONFIG_USB_SUSPEND + static int hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) { @@ -1809,7 +1809,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) /* TRSMRCY = 10 msec */ msleep(10); if (udev) - status = finish_port_resume(udev); + status = finish_device_resume(udev); } } if (status < 0) @@ -1818,7 +1818,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) return status; } -static int hub_resume (struct usb_interface *intf); +#endif /** * usb_resume_device - re-activate a suspended usb device @@ -1841,35 +1841,22 @@ int usb_resume_device(struct usb_device *udev) if (port1 < 0) return port1; - /* "global resume" of the HC-to-USB interface (root hub), or - * selective resume of one hub-to-device port - */ - if (!udev->parent) { - struct usb_bus *bus = udev->bus; - if (bus && bus->op->hub_resume) { - status = bus->op->hub_resume (bus); +#ifdef CONFIG_USB_SUSPEND + /* selective resume of one downstream hub-to-device port */ + if (udev->parent) { + if (udev->state == USB_STATE_SUSPENDED) { + // NOTE swsusp may bork us, device state being wrong... + // NOTE this fails if parent is also suspended... + status = hub_port_resume(hdev_to_hub(udev->parent), + port1, udev); } else - status = -EOPNOTSUPP; - if (status == 0) { - dev_dbg(&udev->dev, "usb resume\n"); - /* TRSMRCY = 10 msec */ - msleep(10); - usb_set_device_state (udev, USB_STATE_CONFIGURED); - udev->dev.power.power_state = PMSG_ON; - status = hub_resume (udev - ->actconfig->interface[0]); - } - } else if (udev->state == USB_STATE_SUSPENDED) { - // NOTE this fails if parent is also suspended... - status = hub_port_resume(hdev_to_hub(udev->parent), - port1, udev); - } else { - status = 0; - } - if (status < 0) { + status = 0; + } else +#endif + status = finish_device_resume(udev); + if (status < 0) dev_dbg(&udev->dev, "can't resume, status %d\n", status); - } usb_unlock_device(udev); @@ -1886,6 +1873,8 @@ static int remote_wakeup(struct usb_device *udev) { int status = 0; +#ifdef CONFIG_USB_SUSPEND + /* don't repeat RESUME sequence if this device * was already woken up by some other task */ @@ -1894,9 +1883,10 @@ static int remote_wakeup(struct usb_device *udev) dev_dbg(&udev->dev, "RESUME (wakeup)\n"); /* TRSMRCY = 10 msec */ msleep(10); - status = finish_port_resume(udev); + status = finish_device_resume(udev); } up(&udev->serialize); +#endif return status; } @@ -1911,12 +1901,32 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *udev; udev = hdev->children [port1-1]; - if (udev && udev->state != USB_STATE_SUSPENDED) { + if (udev && (udev->dev.power.power_state.event + == PM_EVENT_ON +#ifdef CONFIG_USB_SUSPEND + || udev->state != USB_STATE_SUSPENDED +#endif + )) { dev_dbg(&intf->dev, "port %d nyet suspended\n", port1); return -EBUSY; } } + /* "global suspend" of the downstream HC-to-USB interface */ + if (!hdev->parent) { + struct usb_bus *bus = hdev->bus; + if (bus && bus->op->hub_suspend) { + int status = bus->op->hub_suspend (bus); + + if (status != 0) { + dev_dbg(&hdev->dev, "'global' suspend %d\n", + status); + return status; + } + } else + return -EOPNOTSUPP; + } + /* stop khubd and related activity */ hub_quiesce(hub); return 0; @@ -1926,9 +1936,36 @@ static int hub_resume(struct usb_interface *intf) { struct usb_device *hdev = interface_to_usbdev(intf); struct usb_hub *hub = usb_get_intfdata (intf); - unsigned port1; int status; + /* "global resume" of the downstream HC-to-USB interface */ + if (!hdev->parent) { + struct usb_bus *bus = hdev->bus; + if (bus && bus->op->hub_resume) { + status = bus->op->hub_resume (bus); + if (status) { + dev_dbg(&intf->dev, "'global' resume %d\n", + status); + return status; + } + } else + return -EOPNOTSUPP; + if (status == 0) { + /* TRSMRCY = 10 msec */ + msleep(10); + } + } + + hub_activate(hub); + + /* REVISIT: this recursion probably shouldn't exist. Remove + * this code sometime, after retesting with different root and + * external hubs. + */ +#ifdef CONFIG_USB_SUSPEND + { + unsigned port1; + for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; u16 portstat, portchange; @@ -1953,7 +1990,7 @@ static int hub_resume(struct usb_interface *intf) if (portstat & USB_PORT_STAT_SUSPEND) status = hub_port_resume(hub, port1, udev); else { - status = finish_port_resume(udev); + status = finish_device_resume(udev); if (status < 0) { dev_dbg(&intf->dev, "resume port %d --> %d\n", port1, status); @@ -1962,8 +1999,8 @@ static int hub_resume(struct usb_interface *intf) } up(&udev->serialize); } - hub->resume_root_hub = 0; - hub_activate(hub); + } +#endif return 0; } @@ -1987,26 +2024,6 @@ void usb_resume_root_hub(struct usb_device *hdev) kick_khubd(hub); } -#else /* !CONFIG_USB_SUSPEND */ - -int usb_suspend_device(struct usb_device *udev) -{ - /* state does NOT lie by saying it's USB_STATE_SUSPENDED! */ - return 0; -} - -int usb_resume_device(struct usb_device *udev) -{ - udev->dev.power.power_state.event = PM_EVENT_ON; - return 0; -} - -#define hub_suspend NULL -#define hub_resume NULL -#define remote_wakeup(x) 0 - -#endif /* CONFIG_USB_SUSPEND */ - EXPORT_SYMBOL(usb_suspend_device); EXPORT_SYMBOL(usb_resume_device); -- GitLab From 5f827ea3c3820cd8e0a1a35e4d275c8b78ee94e1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:38:16 -0700 Subject: [PATCH 0778/1519] [PATCH] usbcore PCI glue updates for PM This updates the PCI glue to address the new and simplified usbcore suspend semantics, where CONFIG_USB_SUSPEND becomes irrelevant to HCDs because hcd->hub_suspend() will always be called. - Removes now-unneeded recursion support - Go back to ignoring faults reported by the wakeup calls; we expect them to fail sometimes, and that's just fine. The PCI HCDs will need simple changes to catch up to this, like being able to ignore the setting of CONFIG_USB_SUSPEND. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++++++------------------------ drivers/usb/core/hcd.h | 6 +- 2 files changed, 53 insertions(+), 59 deletions(-) --- drivers/usb/core/hcd-pci.c | 106 +++++++++++++++++-------------------- drivers/usb/core/hcd.h | 6 +-- 2 files changed, 53 insertions(+), 59 deletions(-) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 6385d1a99b60..84d9e69329bb 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -30,6 +30,8 @@ #include #include #include + +#include "usb.h" #include "hcd.h" @@ -197,6 +199,26 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) hcd = pci_get_drvdata(dev); + /* Root hub suspend should have stopped all downstream traffic, + * and all bus master traffic. And done so for both the interface + * and the stub usb_device (which we check here). But maybe it + * didn't; writing sysfs power/state files ignores such rules... + * + * We must ignore the FREEZE vs SUSPEND distinction here, because + * otherwise the swsusp will save (and restore) garbage state. + */ + if (hcd->self.root_hub->dev.power.power_state.event == PM_EVENT_ON) + return -EBUSY; + + if (hcd->driver->suspend) { + retval = hcd->driver->suspend(hcd, message); + if (retval) { + dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n", + retval); + goto done; + } + } + /* FIXME until the generic PM interfaces change a lot more, this * can't use PCI D1 and D2 states. For example, the confusion * between messages and states will need to vanish, and messages @@ -215,31 +237,13 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) */ has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - switch (hcd->state) { - - /* entry if root hub wasn't yet suspended ... from sysfs, - * without autosuspend, or if USB_SUSPEND isn't configured. + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. */ - case HC_STATE_RUNNING: - hcd->state = HC_STATE_QUIESCING; - retval = hcd->driver->suspend (hcd, message); - if (retval) { - dev_dbg (hcd->self.controller, - "suspend fail, retval %d\n", - retval); - break; - } - hcd->state = HC_STATE_SUSPENDED; - /* FALLTHROUGH */ + if (hcd->state == HC_STATE_SUSPENDED) { - /* entry with CONFIG_USB_SUSPEND, or hcds that autosuspend: the - * controller and/or root hub will already have been suspended, - * but it won't be ready for a PCI resume call. - * - * FIXME only CONFIG_USB_SUSPEND guarantees hub_suspend() will - * have been called, otherwise root hub timers still run ... - */ - case HC_STATE_SUSPENDED: /* no DMA or IRQs except when HC is active */ if (dev->current_state == PCI_D0) { pci_save_state (dev); @@ -248,7 +252,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) if (!has_pci_pm) { dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n"); - break; + goto done; } /* NOTE: dev->current_state becomes nonzero only here, and @@ -259,28 +263,29 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message) retval = pci_set_power_state (dev, PCI_D3hot); if (retval == 0) { dev_dbg (hcd->self.controller, "--> PCI D3\n"); - retval = pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup); - if (retval) - break; - retval = pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup); - } else if (retval < 0) { + + /* Ignore these return values. We rely on pci code to + * reject requests the hardware can't implement, rather + * than coding the same thing. + */ + (void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup); + (void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup); + } else { dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n", retval); (void) usb_hcd_pci_resume (dev); - break; } - break; - default: + + } else { dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n", hcd->state); WARN_ON(1); retval = -EINVAL; - break; } - /* update power_state **ONLY** to make sysfs happier */ +done: if (retval == 0) - dev->dev.power.power_state = message; + dev->dev.power.power_state = PMSG_SUSPEND; return retval; } EXPORT_SYMBOL (usb_hcd_pci_suspend); @@ -336,20 +341,9 @@ int usb_hcd_pci_resume (struct pci_dev *dev) dev->current_state); } #endif - retval = pci_enable_wake (dev, dev->current_state, 0); - if (retval) { - dev_err(hcd->self.controller, - "can't enable_wake to %d, %d!\n", - dev->current_state, retval); - return retval; - } - retval = pci_enable_wake (dev, PCI_D3cold, 0); - if (retval) { - dev_err(hcd->self.controller, - "can't enable_wake to %d, %d!\n", - PCI_D3cold, retval); - return retval; - } + /* yes, ignore these results too... */ + (void) pci_enable_wake (dev, dev->current_state, 0); + (void) pci_enable_wake (dev, PCI_D3cold, 0); } else { /* Same basic cases: clean (powered/not), dirty */ dev_dbg(hcd->self.controller, "PCI legacy resume\n"); @@ -371,17 +365,17 @@ int usb_hcd_pci_resume (struct pci_dev *dev) dev->dev.power.power_state = PMSG_ON; - hcd->state = HC_STATE_RESUMING; hcd->saw_irq = 0; - retval = hcd->driver->resume (hcd); - if (!HC_IS_RUNNING (hcd->state)) { - dev_dbg (hcd->self.controller, - "resume fail, retval %d\n", retval); - usb_hc_died (hcd); + if (hcd->driver->resume) { + retval = hcd->driver->resume(hcd); + if (retval) { + dev_err (hcd->self.controller, + "PCI post-resume error %d!\n", retval); + usb_hc_died (hcd); + } } - retval = pci_enable_device(dev); return retval; } EXPORT_SYMBOL (usb_hcd_pci_resume); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index eb21f13c5c74..74757fc1a99f 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -182,12 +182,12 @@ struct hc_driver { int (*start) (struct usb_hcd *hcd); /* NOTE: these suspend/resume calls relate to the HC as - * a whole, not just the root hub; they're for bus glue. + * a whole, not just the root hub; they're for PCI bus glue. */ - /* called after all devices were suspended */ + /* called after suspending the hub, before entering D3 etc */ int (*suspend) (struct usb_hcd *hcd, pm_message_t message); - /* called before any devices get resumed */ + /* called after entering D0 (etc), before resuming the hub */ int (*resume) (struct usb_hcd *hcd); /* cleanly make HCD stop writing memory and doing I/O */ -- GitLab From f197b2c54b9d9a133a9a8ff92f35cadf8945ea14 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:42:53 -0700 Subject: [PATCH 0779/1519] [PATCH] OHCI PM updates This simplifies the OHCI root hub suspend logic: - Uses new usbcore root hub calls to make autosuspend work again: * Uses a newish usbcore root hub wakeup mechanism, making requests to khubd not keventd. * Uses an even newer sibling suspend hook. - Expect someone always made usbcore call ohci_hub_suspend() before bus glue fires; and that ohci_hub_resume() is only called after that bus glue ran. Previously, only CONFIG_USB_SUSPEND promised those things. (Includes updates to PCI and OMAP bus glue.) - Handle a not-noticed-before special case during resume from one of the swsusp snapshots when using "usb-handoff": the controller isn't left in RESET state. (A bug to fix in the usb-handoff code...) Also cleans up a minor debug printk glitch, and switches an mdelay over to an msleep (how did that stick around for so long?). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/ohci-dbg.c | 4 ---- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 42 ++++++++++++------------------------------ drivers/usb/host/ohci-mem.c | 1 - drivers/usb/host/ohci-omap.c | 36 ++++++++++++------------------------ drivers/usb/host/ohci-pci.c | 40 ++++++++-------------------------------- drivers/usb/host/ohci.h | 1 - 7 files changed, 33 insertions(+), 93 deletions(-) --- drivers/usb/host/ohci-dbg.c | 4 ---- drivers/usb/host/ohci-hcd.c | 2 +- drivers/usb/host/ohci-hub.c | 42 +++++++++++------------------------- drivers/usb/host/ohci-mem.c | 1 - drivers/usb/host/ohci-omap.c | 38 +++++++++++--------------------- drivers/usb/host/ohci-pci.c | 40 +++++++--------------------------- drivers/usb/host/ohci.h | 1 - 7 files changed, 34 insertions(+), 94 deletions(-) diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 7924c74f958e..7bfffcbbd226 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -193,10 +193,6 @@ ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size) maybe_print_eds (controller, "donehead", ohci_readl (controller, ®s->donehead), next, size); - - /* broken fminterval means traffic won't flow! */ - ohci_dbg (controller, "fminterval %08x\n", - ohci_readl (controller, ®s->fminterval)); } #define dbg_port_sw(hc,num,value,next,size) \ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index c26ab5f2a403..5c0c6c8a7a82 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -723,7 +723,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs) ohci_vdbg (ohci, "resume detect\n"); ohci_writel (ohci, OHCI_INTR_RD, ®s->intrstatus); if (hcd->state != HC_STATE_QUIESCING) - schedule_work(&ohci->rh_resume); + usb_hcd_resume_root_hub(hcd); } if (ints & OHCI_INTR_WDH) { diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index b96948ea3005..39a60e731ec2 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -73,7 +73,6 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) ohci_dbg (ohci, "suspend root hub\n"); /* First stop any processing */ - hcd->state = HC_STATE_QUIESCING; if (ohci->hc_control & OHCI_SCHED_ENABLES) { int limit; @@ -108,7 +107,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) else ohci->hc_control &= ~OHCI_CTRL_RWE; - /* Suspend hub */ + /* Suspend hub ... this is the "global (to this bus) suspend" mode, + * which doesn't imply ports will first be individually suspended. + */ ohci->hc_control &= ~OHCI_CTRL_HCFS; ohci->hc_control |= OHCI_USB_SUSPEND; ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); @@ -118,8 +119,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd) ohci->next_statechange = jiffies + msecs_to_jiffies (5); done: + /* external suspend vs self autosuspend ... same effect */ if (status == 0) - hcd->state = HC_STATE_SUSPENDED; + usb_hcd_suspend_root_hub(hcd); spin_unlock_irqrestore (&ohci->lock, flags); return status; } @@ -146,7 +148,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd) ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { - /* this can happen after suspend-to-disk */ + /* this can happen after resuming a swsusp snapshot */ if (hcd->state == HC_STATE_RESUMING) { ohci_dbg (ohci, "BIOS/SMM active, control %03x\n", ohci->hc_control); @@ -169,11 +171,12 @@ static int ohci_hub_resume (struct usb_hcd *hcd) ohci_info (ohci, "wakeup\n"); break; case OHCI_USB_OPER: - ohci_dbg (ohci, "already resumed\n"); - status = 0; + /* this can happen after resuming a swsusp snapshot */ + ohci_dbg (ohci, "snapshot resume? reinit\n"); + status = -EBUSY; break; default: /* RESET, we lost power */ - ohci_dbg (ohci, "root hub hardware reset\n"); + ohci_dbg (ohci, "lost power\n"); status = -EBUSY; } spin_unlock_irq (&ohci->lock); @@ -198,8 +201,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd) } /* Some controllers (lucent erratum) need extra-long delays */ - hcd->state = HC_STATE_RESUMING; - mdelay (20 /* usb 11.5.1.10 */ + 15); + msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1); temp = ohci_readl (ohci, &ohci->regs->control); temp &= OHCI_CTRL_HCFS; @@ -273,27 +275,9 @@ static int ohci_hub_resume (struct usb_hcd *hcd) (void) ohci_readl (ohci, &ohci->regs->control); } - hcd->state = HC_STATE_RUNNING; return 0; } -static void ohci_rh_resume (void *_hcd) -{ - struct usb_hcd *hcd = _hcd; - - usb_lock_device (hcd->self.root_hub); - (void) ohci_hub_resume (hcd); - usb_unlock_device (hcd->self.root_hub); -} - -#else - -static void ohci_rh_resume (void *_hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (_hcd); - ohci_dbg(ohci, "rh_resume ??\n"); -} - #endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -367,7 +351,6 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) #ifdef CONFIG_PM /* save power by suspending idle root hubs; * INTR_RD wakes us when there's work - * NOTE: if we can do this, we don't need a root hub timer! */ if (can_suspend && !changed @@ -380,7 +363,6 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) ) { ohci_vdbg (ohci, "autosuspend\n"); (void) ohci_hub_suspend (hcd); - hcd->state = HC_STATE_RUNNING; usb_unlock_device (hcd->self.root_hub); } #endif @@ -554,7 +536,7 @@ static int ohci_hub_control ( temp = RH_PS_POCI; if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER) - schedule_work (&ohci->rh_resume); + usb_hcd_resume_root_hub(hcd); break; case USB_PORT_FEAT_C_SUSPEND: temp = RH_PS_PSSC; diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index 9fb83dfb1eb4..bfbe328a4788 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -28,7 +28,6 @@ static void ohci_hcd_init (struct ohci_hcd *ohci) ohci->next_statechange = jiffies; spin_lock_init (&ohci->lock); INIT_LIST_HEAD (&ohci->pending); - INIT_WORK (&ohci->rh_resume, ohci_rh_resume, ohci_to_hcd(ohci)); ohci->reboot_notifier.notifier_call = ohci_reboot; } diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index e67c07dc426d..b3498b9b965f 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -458,41 +458,29 @@ static int ohci_hcd_omap_drv_remove(struct device *dev) static int ohci_omap_suspend(struct device *dev, pm_message_t message) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); - int status = -EINVAL; - - down(&ohci_to_hcd(ohci)->self.root_hub->serialize); - status = ohci_hub_suspend(ohci_to_hcd(ohci)); - if (status == 0) { - omap_ohci_clock_power(0); - ohci_to_hcd(ohci)->self.root_hub->state = - USB_STATE_SUSPENDED; - ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; - dev->power.power_state = PMSG_SUSPEND; - } - up(&ohci_to_hcd(ohci)->self.root_hub->serialize); - return status; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + omap_ohci_clock_power(0); + ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; + dev->power.power_state = PMSG_SUSPEND; + return 0; } static int ohci_omap_resume(struct device *dev) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); - int status = 0; if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; + omap_ohci_clock_power(1); -#ifdef CONFIG_USB_SUSPEND - /* get extra cleanup even if remote wakeup isn't in use */ - status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub); -#else - down(&ohci_to_hcd(ohci)->self.root_hub->serialize); - status = ohci_hub_resume(ohci_to_hcd(ohci)); - up(&ohci_to_hcd(ohci)->self.root_hub->serialize); -#endif - if (status == 0) - dev->power.power_state = PMSG_ON; - return status; + dev->power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(dev_get_drvdata(dev)); + return 0; } #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 0afa237b02ad..99a0ad41aec5 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -112,23 +112,13 @@ ohci_pci_start (struct usb_hcd *hcd) static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) { - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - - /* suspend root hub, hoping it keeps power during suspend */ - if (time_before (jiffies, ohci->next_statechange)) - msleep (100); - -#ifdef CONFIG_USB_SUSPEND - (void) usb_suspend_device (hcd->self.root_hub); -#else - usb_lock_device (hcd->self.root_hub); - (void) ohci_hub_suspend (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif + /* root hub was already suspended */ - /* let things settle down a bit */ - msleep (100); - + /* FIXME these PMAC things get called in the wrong places. ASIC + * clocks should be turned off AFTER entering D3, and on BEFORE + * trying to enter D0. Evidently the PCI layer doesn't currently + * provide the right sort of platform hooks for this ... + */ #ifdef CONFIG_PPC_PMAC if (_machine == _MACH_Pmac) { struct device_node *of_node; @@ -145,9 +135,6 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) static int ohci_pci_resume (struct usb_hcd *hcd) { - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int retval = 0; - #ifdef CONFIG_PPC_PMAC if (_machine == _MACH_Pmac) { struct device_node *of_node; @@ -159,19 +146,8 @@ static int ohci_pci_resume (struct usb_hcd *hcd) } #endif /* CONFIG_PPC_PMAC */ - /* resume root hub */ - if (time_before (jiffies, ohci->next_statechange)) - msleep (100); -#ifdef CONFIG_USB_SUSPEND - /* get extra cleanup even if remote wakeup isn't in use */ - retval = usb_resume_device (hcd->self.root_hub); -#else - usb_lock_device (hcd->self.root_hub); - retval = ohci_hub_resume (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - - return retval; + usb_hcd_resume_root_hub(hcd); + return 0; } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 8a9b9d9209e9..caacf14371f5 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -389,7 +389,6 @@ struct ohci_hcd { unsigned long next_statechange; /* suspend/resume */ u32 fminterval; /* saved register */ - struct work_struct rh_resume; struct notifier_block reboot_notifier; unsigned long flags; /* for HC bugs */ -- GitLab From f2cb36c1df427431a8c6096b4ad113df767c1bd9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:43:30 -0700 Subject: [PATCH 0780/1519] [PATCH] update PCI early-handoff handling for OHCI The PCI "early usb handoff" quirk logic didn't work like "ohci-hcd" ... This patch makes it do so by: - Resetting the controller after kicking BIOS off, matching the normal "chip in hardware reset" startup mode; - Reporting any BIOS that borks this simple handoff; it's likely got a few other surprises for us too. - Ignoring that handoff on HPPA; The diagnostic string is mostly shared with EHCI, saving a few bytes. Signed-off-by: Greg Kroah-Hartman drivers/usb/host/pci-quirks.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) --- drivers/usb/host/pci-quirks.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 8ee5c3ed4cd6..49f7381a6fd3 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -60,6 +60,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, qui #define OHCI_INTRENABLE 0x10 #define OHCI_INTRDISABLE 0x14 #define OHCI_OCR (1 << 3) /* ownership change request */ +#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ #define OHCI_INTR_OC (1 << 30) /* ownership change */ @@ -140,13 +141,17 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; int wait_time; + u32 control; base = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); if (base == NULL) return; - if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) { - wait_time = 500; /* 0.5 seconds */ +/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ +#ifndef __hppa__ + control = readl(base + OHCI_CONTROL); + if (control & OHCI_CTRL_IR) { + wait_time = 500; /* arbitrary; 5 seconds */ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); writel(OHCI_OCR, base + OHCI_CMDSTATUS); while (wait_time > 0 && @@ -154,7 +159,15 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) wait_time -= 10; msleep(10); } + if (wait_time <= 0) + printk(KERN_WARNING "%s %s: early BIOS handoff " + "failed (BIOS bug ?)\n", + pdev->dev.bus_id, "OHCI"); + + /* reset controller, preserving RWC */ + writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL); } +#endif /* * disable interrupts @@ -211,8 +224,9 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) /* * well, possibly buggy BIOS... */ - printk(KERN_WARNING "EHCI early BIOS handoff " - "failed (BIOS bug ?)\n"); + printk(KERN_WARNING "%s %s: early BIOS handoff " + "failed (BIOS bug ?)\n", + pdev->dev.bus_id, "EHCI"); pci_write_config_dword(pdev, hcc_params + EHCI_USBLEGSUP, EHCI_USBLEGSUP_OS); -- GitLab From a7f72abe8fac9b919135005e06216be8eef945a2 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:44:56 -0700 Subject: [PATCH 0781/1519] [PATCH] UHCI PM updates This removes suspend and resume path recursion in UHCI. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/uhci-hcd.c | 9 --------- 1 file changed, 9 deletions(-) --- drivers/usb/host/uhci-hcd.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index b44094fcd779..34c9dbc6a156 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -762,11 +762,6 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) if (uhci->hc_inaccessible) /* Dead or already suspended */ goto done; -#ifndef CONFIG_USB_SUSPEND - /* Otherwise this would never happen */ - suspend_rh(uhci, UHCI_RH_SUSPENDED); -#endif - if (uhci->rh_state > UHCI_RH_SUSPENDED) { dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); hcd->state = HC_STATE_RUNNING; @@ -808,10 +803,6 @@ static int uhci_resume(struct usb_hcd *hcd) check_and_reset_hc(uhci); configure_hc(uhci); -#ifndef CONFIG_USB_SUSPEND - /* Otherwise this would never happen */ - wakeup_rh(uhci); -#endif if (uhci->rh_state == UHCI_RH_RESET) suspend_rh(uhci, UHCI_RH_SUSPENDED); -- GitLab From ccdcf77ae32e3d3347fdf3810b27f899e98c34fb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:45:13 -0700 Subject: [PATCH 0782/1519] [PATCH] ISP116x PM updates This makes the isp116x driver stop using usb_suspend_device() and usb_resume_device() ... usbcore now calls to the root hub methods, removing the need for this. It also switches from keventd to khubd for remote wakeup. (Compile tested.) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/isp116x-hcd.c | 29 ++++------------------------- drivers/usb/host/isp116x.h | 1 - 2 files changed, 4 insertions(+), 26 deletions(-) --- drivers/usb/host/isp116x-hcd.c | 29 ++++------------------------- drivers/usb/host/isp116x.h | 1 - 2 files changed, 4 insertions(+), 26 deletions(-) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 554d60282a9d..f68220fc53fd 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -638,7 +638,7 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) + msecs_to_jiffies(20) + 1); if (intstat & HCINT_RD) { DBG("---- remote wakeup\n"); - schedule_work(&isp116x->rh_resume); + usb_hcd_resume_root_hub(hcd); ret = IRQ_HANDLED; } irqstat &= ~HCuPINT_OPR; @@ -1263,22 +1263,12 @@ static int isp116x_hub_resume(struct usb_hcd *hcd) return 0; } -static void isp116x_rh_resume(void *_hcd) -{ - struct usb_hcd *hcd = _hcd; - - usb_resume_device(hcd->self.root_hub); -} #else #define isp116x_hub_suspend NULL #define isp116x_hub_resume NULL -static void isp116x_rh_resume(void *_hcd) -{ -} - #endif /*-----------------------------------------------------------------*/ @@ -1732,7 +1722,6 @@ static int __init isp116x_probe(struct device *dev) isp116x->addr_reg = addr_reg; spin_lock_init(&isp116x->lock); INIT_LIST_HEAD(&isp116x->async); - INIT_WORK(&isp116x->rh_resume, isp116x_rh_resume, hcd); isp116x->board = dev->platform_data; if (!isp116x->board) { @@ -1777,16 +1766,10 @@ static int __init isp116x_probe(struct device *dev) static int isp116x_suspend(struct device *dev, pm_message_t state) { int ret = 0; - struct usb_hcd *hcd = dev_get_drvdata(dev); VDBG("%s: state %x\n", __func__, state); - ret = usb_suspend_device(hcd->self.root_hub); - if (!ret) { - dev->power.power_state = state; - INFO("%s suspended\n", hcd_name); - } else - ERR("%s suspend failed\n", hcd_name); + dev->power.power_state = state; return ret; } @@ -1797,15 +1780,11 @@ static int isp116x_suspend(struct device *dev, pm_message_t state) static int isp116x_resume(struct device *dev) { int ret = 0; - struct usb_hcd *hcd = dev_get_drvdata(dev); VDBG("%s: state %x\n", __func__, dev->power.power_state); - ret = usb_resume_device(hcd->self.root_hub); - if (!ret) { - dev->power.power_state = PMSG_ON; - VDBG("%s resumed\n", (char *)hcd_name); - } + dev->power.power_state = PMSG_ON; + return ret; } diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h index 58873470dcf5..c6fec96785fe 100644 --- a/drivers/usb/host/isp116x.h +++ b/drivers/usb/host/isp116x.h @@ -253,7 +253,6 @@ static const int cc_to_error[16] = { struct isp116x { spinlock_t lock; - struct work_struct rh_resume; void __iomem *addr_reg; void __iomem *data_reg; -- GitLab From 5edbfb7c8af0577097dae87cdd4dfdba82bb9579 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Sep 2005 22:45:26 -0700 Subject: [PATCH 0783/1519] [PATCH] stop exporting two functions The way we're looking at USB suspend lately doesn't expect drivers to call usb_suspend_device() or usb_resume_device() directly; that'll be implicit when no interfaces are in use. This patch removes those APIs from visibility outside usbcore. Signed-off-by: David Brownell drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-) --- drivers/usb/core/hub.c | 12 ++++-------- drivers/usb/core/usb.h | 4 ++++ include/linux/usb.h | 5 ----- 3 files changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6a601a4547e7..15db5e490aa2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1652,10 +1652,10 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) #endif -/** +/* * usb_suspend_device - suspend a usb device * @udev: device that's no longer in active use - * Context: must be able to sleep; device not locked + * Context: must be able to sleep; device not locked; pm locks held * * Suspends a USB device that isn't in active use, conserving power. * Devices may wake out of a suspend, if anything important happens, @@ -1820,10 +1820,10 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) #endif -/** +/* * usb_resume_device - re-activate a suspended usb device * @udev: device to re-activate - * Context: must be able to sleep; device not locked + * Context: must be able to sleep; device not locked; pm locks held * * This will re-activate the suspended device, increasing power usage * while letting drivers communicate again with its endpoints. @@ -2024,10 +2024,6 @@ void usb_resume_root_hub(struct usb_device *hdev) kick_khubd(hub); } -EXPORT_SYMBOL(usb_suspend_device); -EXPORT_SYMBOL(usb_resume_device); - - /* USB 2.0 spec, 7.1.7.3 / fig 7-29: * diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 7add46ecc6a2..4d59f6e07999 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -29,6 +29,10 @@ extern void usb_major_cleanup(void); extern int usb_host_init(void); extern void usb_host_cleanup(void); +extern int usb_suspend_device(struct usb_device *dev); +extern int usb_resume_device(struct usb_device *dev); + + /* Interfaces and their "power state" are owned by usbcore */ static inline void mark_active(struct usb_interface *f) diff --git a/include/linux/usb.h b/include/linux/usb.h index 25ec91ddcd04..207b1ad9d990 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -975,11 +975,6 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout); -/* selective suspend/resume */ -extern int usb_suspend_device(struct usb_device *dev); -extern int usb_resume_device(struct usb_device *dev); - - /* wrappers around usb_control_msg() for the most common standard requests */ extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype, unsigned char descindex, void *buf, int size); -- GitLab From b13296c6617f22e8c0174a7af32780617db0e680 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 27 Sep 2005 10:38:54 -0700 Subject: [PATCH 0784/1519] [PATCH] updates for "controller suspended" handling Reject URBs to _all_ devices when their host controllers are suspended; even root hub registers will be unavailable. Also, don't reject urbs to root hubs in other cases; the only upstream link is through that controller (on PCI or whatever SOC bus is in use). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-) --- drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index de59bb515315..b7bb8dd1894a 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -458,22 +458,18 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) default: /* non-generic request */ - if (HC_IS_SUSPENDED (hcd->state)) - status = -EAGAIN; - else { - switch (typeReq) { - case GetHubStatus: - case GetPortStatus: - len = 4; - break; - case GetHubDescriptor: - len = sizeof (struct usb_hub_descriptor); - break; - } - status = hcd->driver->hub_control (hcd, - typeReq, wValue, wIndex, - tbuf, wLength); + switch (typeReq) { + case GetHubStatus: + case GetPortStatus: + len = 4; + break; + case GetHubDescriptor: + len = sizeof (struct usb_hub_descriptor); + break; } + status = hcd->driver->hub_control (hcd, + typeReq, wValue, wIndex, + tbuf, wLength); break; error: /* "protocol stall" on error */ @@ -487,7 +483,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) "CTRL: TypeReq=0x%x val=0x%x " "idx=0x%x len=%d ==> %d\n", typeReq, wValue, wIndex, - wLength, urb->status); + wLength, status); } } if (len) { diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index b32898e0a27d..f2a1fed2a802 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -237,7 +237,8 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) (dev->state < USB_STATE_DEFAULT) || (!dev->bus) || (dev->devnum <= 0)) return -ENODEV; - if (dev->state == USB_STATE_SUSPENDED) + if (dev->bus->controller->power.power_state.event != PM_EVENT_ON + || dev->state == USB_STATE_SUSPENDED) return -EHOSTUNREACH; if (!(op = dev->bus->op) || !op->submit_urb) return -ENODEV; -- GitLab From d09d36a91c70cb3cc609d693bf6a7e7a266ff9e6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 26 Sep 2005 16:22:45 -0400 Subject: [PATCH 0785/1519] [PATCH] USB: usb_bulk_message() handles interrupts endpoints Because there is no bulk_interrupt_message() routine and no USBDEVFS_INTERRUPT ioctl, people have been forced to abuse the usb_bulk_message() routine and USBDEVFS_BULK by using them for interrupt transfers as well as bulk transfers. This patch (as567) formalizes this practice and adds code to usb_bulk_message() for detecting when the target is really an interrupt endpoint. If it is, the routine submits an interrupt URB (using the default interval) instead of a bulk URB. In theory this should help HCDs that don't like it when people try to mix transfer types, queuing both periodic and non-periodic types for the same endpoint. Not fully tested -- I don't have any programs that use USBDEVFS_BULK for interrupt transfers -- but it compiles okay and normal bulk messages work as well as before. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman drivers/usb/core/message.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) --- drivers/usb/core/message.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index ebf59ea99263..574d0d4b3401 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -187,21 +187,37 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u * If a thread in your driver uses this call, make sure your disconnect() * method can wait for it to complete. Since you don't have a handle on * the URB used, you can't cancel the request. + * + * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT + * ioctl, users are forced to abuse this routine by using it to submit + * URBs for interrupt endpoints. We will take the liberty of creating + * an interrupt URB (with the default interval) if the target is an + * interrupt endpoint. */ int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout) { struct urb *urb; + struct usb_host_endpoint *ep; - if (len < 0) + ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out) + [usb_pipeendpoint(pipe)]; + if (!ep || len < 0) return -EINVAL; - urb=usb_alloc_urb(0, GFP_KERNEL); + urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return -ENOMEM; - usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, - usb_api_blocking_completion, NULL); + if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT) { + pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); + usb_fill_int_urb(urb, usb_dev, pipe, data, len, + usb_api_blocking_completion, NULL, + ep->desc.bInterval); + } else + usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, + usb_api_blocking_completion, NULL); return usb_start_wait_urb(urb, timeout, actual_length); } -- GitLab From 8b262bd25580e165710e8a27df19cd60c2ef58a3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 26 Sep 2005 16:31:15 -0400 Subject: [PATCH 0786/1519] [PATCH] USB: UHCI: Spruce up some comments This patch (as570) changes some comments in the uhci-hcd header file and removes an unused declaration (something I forgot to erase in an earlier patch). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman drivers/usb/host/uhci-hcd.h | 91 +++++++++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 42 deletions(-) --- drivers/usb/host/uhci-hcd.h | 91 ++++++++++++++++++++----------------- 1 file changed, 49 insertions(+), 42 deletions(-) diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index b04d99df0a0e..e576db57a926 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -7,6 +7,7 @@ #define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT) #define PIPE_DEVEP_MASK 0x0007ff00 + /* * Universal Host Controller Interface data structures and defines */ @@ -82,15 +83,10 @@ #define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */ #define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */ -struct uhci_frame_list { - __le32 frame[UHCI_NUMFRAMES]; - - void *frame_cpu[UHCI_NUMFRAMES]; - dma_addr_t dma_handle; -}; - -struct urb_priv; +/* + * Queue Headers + */ /* * One role of a QH is to hold a queue of TDs for some endpoint. Each QH is @@ -116,13 +112,13 @@ struct uhci_qh { struct urb_priv *urbp; - struct list_head list; /* P: uhci->frame_list_lock */ - struct list_head remove_list; /* P: uhci->remove_list_lock */ + struct list_head list; + struct list_head remove_list; } __attribute__((aligned(16))); /* * We need a special accessor for the element pointer because it is - * subject to asynchronous updates by the controller + * subject to asynchronous updates by the controller. */ static __le32 inline qh_element(struct uhci_qh *qh) { __le32 element = qh->element; @@ -131,6 +127,11 @@ static __le32 inline qh_element(struct uhci_qh *qh) { return element; } + +/* + * Transfer Descriptors + */ + /* * for TD : */ @@ -183,17 +184,10 @@ static __le32 inline qh_element(struct uhci_qh *qh) { * * That's silly, the hardware doesn't care. The hardware only cares that * the hardware words are 16-byte aligned, and we can have any amount of - * sw space after the TD entry as far as I can tell. - * - * But let's just go with the documentation, at least for 32-bit machines. - * On 64-bit machines we probably want to take advantage of the fact that - * hw doesn't really care about the size of the sw-only area. - * - * Alas, not anymore, we have more than 4 words for software, woops. - * Everything still works tho, surprise! -jerdfelt + * sw space after the TD entry. * * td->link points to either another TD (not necessarily for the same urb or - * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs) + * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs). */ struct uhci_td { /* Hardware fields */ @@ -205,16 +199,16 @@ struct uhci_td { /* Software fields */ dma_addr_t dma_handle; - struct list_head list; /* P: urb->lock */ - struct list_head remove_list; /* P: uhci->td_remove_list_lock */ + struct list_head list; + struct list_head remove_list; int frame; /* for iso: what frame? */ - struct list_head fl_list; /* P: uhci->frame_list_lock */ + struct list_head fl_list; } __attribute__((aligned(16))); /* * We need a special accessor for the control/status word because it is - * subject to asynchronous updates by the controller + * subject to asynchronous updates by the controller. */ static u32 inline td_status(struct uhci_td *td) { __le32 status = td->status; @@ -224,6 +218,10 @@ static u32 inline td_status(struct uhci_td *td) { } +/* + * Skeleton Queue Headers + */ + /* * The UHCI driver places Interrupt, Control and Bulk into QH's both * to group together TD's for one transfer, and also to faciliate queuing @@ -254,15 +252,15 @@ static u32 inline td_status(struct uhci_td *td) { * * The terminating QH is used for 2 reasons: * - To place a terminating TD which is used to workaround a PIIX bug - * (see Intel errata for explanation) + * (see Intel errata for explanation), and * - To loop back to the full-speed control queue for full-speed bandwidth - * reclamation + * reclamation. * * Isochronous transfers are stored before the start of the skeleton * schedule and don't use QH's. While the UHCI spec doesn't forbid the - * use of QH's for Isochronous, it doesn't use them either. Since we don't - * need to use them either, we follow the spec diagrams in hope that it'll - * be more compatible with future UHCI implementations. + * use of QH's for Isochronous, it doesn't use them either. And the spec + * says that queues never advance on an error completion status, which + * makes them totally unsuitable for Isochronous transfers. */ #define UHCI_NUM_SKELQH 12 @@ -312,8 +310,13 @@ static inline int __interval_to_skel(int interval) return 0; /* int128 for 128-255 ms (Max.) */ } + +/* + * The UHCI controller and root hub + */ + /* - * States for the root hub. + * States for the root hub: * * To prevent "bouncing" in the presence of electrical noise, * when there are no devices attached we delay for 1 second in the @@ -324,7 +327,7 @@ static inline int __interval_to_skel(int interval) */ enum uhci_rh_state { /* In the following states the HC must be halted. - * These two must come first */ + * These two must come first. */ UHCI_RH_RESET, UHCI_RH_SUSPENDED, @@ -336,13 +339,13 @@ enum uhci_rh_state { UHCI_RH_SUSPENDING, /* In the following states it's an error if the HC is halted. - * These two must come last */ + * These two must come last. */ UHCI_RH_RUNNING, /* The normal state */ UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */ }; /* - * This describes the full uhci information. + * The full UHCI controller information: */ struct uhci_hcd { @@ -361,7 +364,7 @@ struct uhci_hcd { spinlock_t lock; dma_addr_t frame_dma_handle; /* Hardware frame list */ - __le32 *frame; /* P: uhci->lock */ + __le32 *frame; void **frame_cpu; /* CPU's frame list */ int fsbr; /* Full-speed bandwidth reclamation */ @@ -387,22 +390,22 @@ struct uhci_hcd { unsigned long ports_timeout; /* Time to stop signalling */ /* Main list of URB's currently controlled by this HC */ - struct list_head urb_list; /* P: uhci->lock */ + struct list_head urb_list; /* List of QH's that are done, but waiting to be unlinked (race) */ - struct list_head qh_remove_list; /* P: uhci->lock */ + struct list_head qh_remove_list; unsigned int qh_remove_age; /* Age in frames */ /* List of TD's that are done, but waiting to be freed (race) */ - struct list_head td_remove_list; /* P: uhci->lock */ + struct list_head td_remove_list; unsigned int td_remove_age; /* Age in frames */ /* List of asynchronously unlinked URB's */ - struct list_head urb_remove_list; /* P: uhci->lock */ + struct list_head urb_remove_list; unsigned int urb_remove_age; /* Age in frames */ /* List of URB's awaiting completion callback */ - struct list_head complete_list; /* P: uhci->lock */ + struct list_head complete_list; int rh_numports; /* Number of root-hub ports */ @@ -421,13 +424,17 @@ static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci) #define uhci_dev(u) (uhci_to_hcd(u)->self.controller) + +/* + * Private per-URB data + */ struct urb_priv { struct list_head urb_list; struct urb *urb; struct uhci_qh *qh; /* QH for this URB */ - struct list_head td_list; /* P: urb->lock */ + struct list_head td_list; unsigned fsbr : 1; /* URB turned on FSBR */ unsigned fsbr_timeout : 1; /* URB timed out on FSBR */ @@ -438,9 +445,10 @@ struct urb_priv { unsigned long fsbrtime; /* In jiffies */ - struct list_head queue_list; /* P: uhci->frame_list_lock */ + struct list_head queue_list; }; + /* * Locking in uhci.c * @@ -460,6 +468,5 @@ struct urb_priv { #define PCI_VENDOR_ID_GENESYS 0x17a0 #define PCI_DEVICE_ID_GL880S_UHCI 0x8083 -#define PCI_DEVICE_ID_GL880S_EHCI 0x8084 #endif -- GitLab From dabb592816444fcba1a771e27d4f72a2b8218374 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 22 Sep 2005 23:55:22 -0700 Subject: [PATCH 0787/1519] [PATCH] USB: sisusb warning fix drivers/usb/misc/sisusbvga/sisusb.c: In function `sisusb_reset_text_mode': drivers/usb/misc/sisusbvga/sisusb.c:2461: warning: assignment discards qualifiers from pointer target type Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman drivers/usb/misc/sisusbvga/sisusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- drivers/usb/misc/sisusbvga/sisusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 222ae9cd4c7c..c946c9a538a0 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2440,7 +2440,7 @@ int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init) { int ret = 0, slot = sisusb->font_slot, i; - struct font_desc *myfont; + const struct font_desc *myfont; u8 *tempbuf; u16 *tempbufb; size_t written; -- GitLab From 22efcf4adec4262e0f49e6225f6cd070e4a85d20 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 26 Sep 2005 16:12:02 -0400 Subject: [PATCH 0788/1519] [PATCH] USB: File-Storage gadget: use the kthread API This patch (as566) converts the File-Storage gadget over to the kthread API. The new code doesn't use kthread_stop because the control thread needs to terminate asynchronously when it receives a signal. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman drivers/usb/gadget/file_storage.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-) --- drivers/usb/gadget/file_storage.c | 32 +++++++++++++------------------ 1 file changed, 13 insertions(+), 19 deletions(-) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index a41d9d4baee3..241c570e541c 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -224,6 +224,7 @@ #include #include #include +#include #include #include #include @@ -669,7 +670,6 @@ struct fsg_dev { wait_queue_head_t thread_wqh; int thread_wakeup_needed; struct completion thread_notifier; - int thread_pid; struct task_struct *thread_task; sigset_t thread_signal_mask; @@ -1084,7 +1084,6 @@ static void wakeup_thread(struct fsg_dev *fsg) static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) { unsigned long flags; - struct task_struct *thread_task; /* Do nothing if a higher-priority exception is already in progress. * If a lower-or-equal priority exception is in progress, preempt it @@ -1093,9 +1092,9 @@ static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) if (fsg->state <= new_state) { fsg->exception_req_tag = fsg->ep0_req_tag; fsg->state = new_state; - thread_task = fsg->thread_task; - if (thread_task) - send_sig_info(SIGUSR1, SEND_SIG_FORCED, thread_task); + if (fsg->thread_task) + send_sig_info(SIGUSR1, SEND_SIG_FORCED, + fsg->thread_task); } spin_unlock_irqrestore(&fsg->lock, flags); } @@ -3383,11 +3382,6 @@ static int fsg_main_thread(void *fsg_) { struct fsg_dev *fsg = (struct fsg_dev *) fsg_; - fsg->thread_task = current; - - /* Release all our userspace resources */ - daemonize("file-storage-gadget"); - /* Allow the thread to be killed by a signal, but set the signal mask * to block everything but INT, TERM, KILL, and USR1. */ siginitsetinv(&fsg->thread_signal_mask, sigmask(SIGINT) | @@ -3400,9 +3394,6 @@ static int fsg_main_thread(void *fsg_) * that expects a __user pointer and it will work okay. */ set_fs(get_ds()); - /* Wait for the gadget registration to finish up */ - wait_for_completion(&fsg->thread_notifier); - /* The main loop */ while (fsg->state != FSG_STATE_TERMINATED) { if (exception_in_progress(fsg) || signal_pending(current)) { @@ -3440,8 +3431,9 @@ static int fsg_main_thread(void *fsg_) spin_unlock_irq(&fsg->lock); } + spin_lock_irq(&fsg->lock); fsg->thread_task = NULL; - flush_signals(current); + spin_unlock_irq(&fsg->lock); /* In case we are exiting because of a signal, unregister the * gadget driver and close the backing file. */ @@ -3959,10 +3951,12 @@ static int __init fsg_bind(struct usb_gadget *gadget) sprintf(&serial[i], "%02X", c); } - if ((rc = kernel_thread(fsg_main_thread, fsg, (CLONE_VM | CLONE_FS | - CLONE_FILES))) < 0) + fsg->thread_task = kthread_create(fsg_main_thread, fsg, + "file-storage-gadget"); + if (IS_ERR(fsg->thread_task)) { + rc = PTR_ERR(fsg->thread_task); goto out; - fsg->thread_pid = rc; + } INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); @@ -3994,7 +3988,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) DBG(fsg, "removable=%d, stall=%d, buflen=%u\n", mod_data.removable, mod_data.can_stall, mod_data.buflen); - DBG(fsg, "I/O thread pid: %d\n", fsg->thread_pid); + DBG(fsg, "I/O thread pid: %d\n", fsg->thread_task->pid); return 0; autoconf_fail: @@ -4093,7 +4087,7 @@ static int __init fsg_init(void) set_bit(REGISTERED, &fsg->atomic_bitflags); /* Tell the thread to start working */ - complete(&fsg->thread_notifier); + wake_up_process(fsg->thread_task); return 0; } module_init(fsg_init); -- GitLab From 74ad9bd2fcf0fa203655e0d904809b06c4202bf8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0789/1519] [PATCH] USB: make wHubCharacteristics __le16 to match other usb descriptor fields Also has the nice benefit of making sparc alignment issues go away. Thanks to David Miller for pointing out the problems here. Signed-off-by: Greg Kroah-Hartman drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-) --- drivers/usb/core/hub.c | 22 ++++++++++++---------- drivers/usb/core/hub.h | 2 +- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 15db5e490aa2..e2802bf18095 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -436,9 +436,10 @@ static void hub_power_on(struct usb_hub *hub) { int port1; unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2; + u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); /* if hub supports power switching, enable power on each port */ - if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) { + if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) { dev_dbg(hub->intfdev, "enabling power on all ports\n"); for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++) set_port_feature(hub->hdev, port1, @@ -525,6 +526,7 @@ static int hub_configure(struct usb_hub *hub, struct usb_device *hdev = hub->hdev; struct device *hub_dev = hub->intfdev; u16 hubstatus, hubchange; + u16 wHubCharacteristics; unsigned int pipe; int maxp, ret; char *message; @@ -570,9 +572,9 @@ static int hub_configure(struct usb_hub *hub, dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild, (hdev->maxchild == 1) ? "" : "s"); - le16_to_cpus(&hub->descriptor->wHubCharacteristics); + wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); - if (hub->descriptor->wHubCharacteristics & HUB_CHAR_COMPOUND) { + if (wHubCharacteristics & HUB_CHAR_COMPOUND) { int i; char portstr [USB_MAXCHILDREN + 1]; @@ -585,7 +587,7 @@ static int hub_configure(struct usb_hub *hub, } else dev_dbg(hub_dev, "standalone hub\n"); - switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) { + switch (wHubCharacteristics & HUB_CHAR_LPSM) { case 0x00: dev_dbg(hub_dev, "ganged power switching\n"); break; @@ -598,7 +600,7 @@ static int hub_configure(struct usb_hub *hub, break; } - switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) { + switch (wHubCharacteristics & HUB_CHAR_OCPM) { case 0x00: dev_dbg(hub_dev, "global over-current protection\n"); break; @@ -638,7 +640,7 @@ static int hub_configure(struct usb_hub *hub, } /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */ - switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) { + switch (wHubCharacteristics & HUB_CHAR_TTTT) { case HUB_TTTT_8_BITS: if (hdev->descriptor.bDeviceProtocol != 0) { hub->tt.think_time = 666; @@ -668,7 +670,7 @@ static int hub_configure(struct usb_hub *hub, } /* probe() zeroes hub->indicator[] */ - if (hub->descriptor->wHubCharacteristics & HUB_CHAR_PORTIND) { + if (wHubCharacteristics & HUB_CHAR_PORTIND) { hub->has_indicators = 1; dev_dbg(hub_dev, "Port indicators are supported\n"); } @@ -713,7 +715,7 @@ static int hub_configure(struct usb_hub *hub, (hubstatus & HUB_STATUS_LOCAL_POWER) ? "lost (inactive)" : "good"); - if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) == 0) + if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0) dev_dbg(hub_dev, "%sover-current condition exists\n", (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no "); @@ -2432,6 +2434,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, { struct usb_device *hdev = hub->hdev; struct device *hub_dev = hub->intfdev; + u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); int status, i; dev_dbg (hub_dev, @@ -2469,8 +2472,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (!(portstatus & USB_PORT_STAT_CONNECTION)) { /* maybe switch power back on (e.g. root hub was reset) */ - if ((hub->descriptor->wHubCharacteristics - & HUB_CHAR_LPSM) < 2 + if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 && !(portstatus & (1 << USB_PORT_FEAT_POWER))) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index e7fa9b5a521e..bf23f8978024 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -131,7 +131,7 @@ struct usb_hub_descriptor { __u8 bDescLength; __u8 bDescriptorType; __u8 bNbrPorts; - __u16 wHubCharacteristics; + __le16 wHubCharacteristics; __u8 bPwrOn2PwrGood; __u8 bHubContrCurrent; /* add 1 bit for hub status change; round to bytes */ -- GitLab From 207c47e1fbc8d51500997bfa67c26c00114fab04 Mon Sep 17 00:00:00 2001 From: Thomas Riewe Date: Thu, 29 Sep 2005 14:57:29 +0200 Subject: [PATCH 0790/1519] [PATCH] drivers/usb/serial/ftdi_sio: add PID/VID We would like to add a PID for the Pyramid Appliance Display, which works on USB via FTDI_SIO. Signed-off-by: Thomas Riewe Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8c12a0acf10d..b713113c1650 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -411,6 +411,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, /* * These will probably use user-space drivers. Uncomment them if * you need them or use the user-specified vendor/product module diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 7c65d46c7598..ddb63df31ce6 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -342,6 +342,9 @@ #define EVOLUTION_VID 0xDEEE /* Vendor ID */ #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- GitLab From ddcad752f206be7a0091a041403c3188f2febd16 Mon Sep 17 00:00:00 2001 From: Petko Manolov Date: Mon, 3 Oct 2005 17:24:11 +0300 Subject: [PATCH 0791/1519] [PATCH] pegasus.h This one is a tiny patch adding one more device to the list. Please apply. :) Signed-off-by: Greg Kroah-Hartman drivers/usb/net/pegasus.h | 2 ++ 1 file changed, 2 insertions(+) --- drivers/usb/net/pegasus.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h index b98f2a833442..9fbd59b55cb6 100644 --- a/drivers/usb/net/pegasus.h +++ b/drivers/usb/net/pegasus.h @@ -181,6 +181,8 @@ PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046, DEFAULT_GPIO_RESET ) PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004, + DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet", VENDOR_ADMTEK, 0x8511, DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) -- GitLab From 521daed8db4443a1574a98fc3abae8e230f09eaa Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 2 Oct 2005 17:15:33 -0700 Subject: [PATCH 0792/1519] [PATCH] safe_serial: use preprocessor directive for error Use valid #preprocessor instruction to generate an error. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/safe_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- drivers/usb/serial/safe_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 96a17568cbf1..88bf14abfa7a 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -92,7 +92,7 @@ MODULE_DESCRIPTION (DRIVER_DESC); MODULE_LICENSE("GPL"); #if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT) -#abort "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" +#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" #endif #if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) -- GitLab From d40ece1dc8dcc89ab921755cbc93a5cfb46d0766 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 28 Sep 2005 18:06:04 +0200 Subject: [PATCH 0793/1519] [PATCH] USB: make usb storage note visible in Kconfig the following patch splits the NOTE: in the Device Drivers->USB submenu of Kconfig thus making the whole of it readable on 600x800 terminals. (Otherwise, the line was too big and disappeared into nowhere.) Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- drivers/usb/storage/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index bb9819cc8826..1a9679f76f5a 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,7 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" +comment "may also be needed; see USB_STORAGE Help for more information" depends on USB config USB_STORAGE -- GitLab From a8798533c1f876b97566588cf2bf52458cb4a35d Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 29 Sep 2005 00:14:21 +0100 Subject: [PATCH 0794/1519] [PATCH] USB Storage: HP8200: Another device type detection fix There appears to be one more case where the HP8200 CD writer devices are detected as flash readers - when the USB cable is replugged after use, with the power cable still connected. Oddly enough, the identify device command appears to 'fall through' when the devices are in this state, the status register reading exactly the same opcode as the command (0xA1) that was just executed. I think it's safe to label this behaviour as specific to HP8200 devices, I can't get the flash devices to respond like this. This patch should solve the last of the HP8200 issues which have cropped up recently. Signed-off-by: Daniel Drake Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/shuttle_usbat.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- drivers/usb/storage/shuttle_usbat.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 356342c6e7a2..bd448d6c3185 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -855,15 +855,15 @@ static int usbat_identify_device(struct us_data *us, if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Check for error bit - if (status & 0x01) { - // Device is a CompactFlash reader/writer - US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); - info->devicetype = USBAT_DEV_FLASH; - } else { + // Check for error bit, or if the command 'fell through' + if (status == 0xA1 || !(status & 0x01)) { // Device is HP 8200 US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); info->devicetype = USBAT_DEV_HP8200; + } else { + // Device is a CompactFlash reader/writer + US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); + info->devicetype = USBAT_DEV_FLASH; } return USB_STOR_TRANSPORT_GOOD; -- GitLab From b7b1e65588b8576c66a429a2623c91504efcf751 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Fri, 30 Sep 2005 12:49:36 +0100 Subject: [PATCH 0795/1519] [PATCH] usb-storage: Some minor shuttle_usbat cleanups A while ago, Matthew Dharm wrote: > Looks good. Tho, I would like to see a future patch to do two things: > 1) Change comments from C++ style to C-style > 2) Make sure we're naming consistently everywhere SCM, USBAT, > USBAT-02 (most noticably needing fixing is the string used at > transport-selection time, but a sweep of all uses to be consistent > would be in order). Sorry for the long delay, here is a patch to address this. I also clarified some ATA/ATAPI wording + function names. Signed-off-by: Daniel Drake Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/shuttle_usbat.c | 306 ++++++++++++++++++++---------------- drivers/usb/storage/shuttle_usbat.h | 66 +++---- drivers/usb/storage/transport.h | 2 drivers/usb/storage/unusual_devs.h | 10 - drivers/usb/storage/usb.c | 4 5 files changed, 213 insertions(+), 175 deletions(-) --- drivers/usb/storage/shuttle_usbat.c | 306 ++++++++++++++++------------ drivers/usb/storage/shuttle_usbat.h | 66 +++--- drivers/usb/storage/transport.h | 2 +- drivers/usb/storage/unusual_devs.h | 10 +- drivers/usb/storage/usb.c | 4 +- 5 files changed, 213 insertions(+), 175 deletions(-) diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index bd448d6c3185..33c55a6261bb 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -1,4 +1,4 @@ -/* Driver for SCM Microsystems USB-ATAPI cable +/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable * * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $ * @@ -67,10 +67,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); /* - * Convenience function to produce an ATAPI read/write sectors command + * Convenience function to produce an ATA read/write sectors command * Use cmd=0x20 for read, cmd=0x30 for write */ -static void usbat_pack_atapi_sector_cmd(unsigned char *buf, +static void usbat_pack_ata_sector_cmd(unsigned char *buf, unsigned char thistime, u32 sector, unsigned char cmd) { @@ -196,10 +196,12 @@ static int usbat_check_status(struct us_data *us) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_FAILED; - if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok) + /* error/check condition (0x51 is ok) */ + if (*reply & 0x01 && *reply != 0x51) return USB_STOR_TRANSPORT_FAILED; - if (*reply & 0x20) // device fault + /* device fault */ + if (*reply & 0x20) return USB_STOR_TRANSPORT_FAILED; return USB_STOR_TRANSPORT_GOOD; @@ -222,29 +224,39 @@ static int usbat_set_shuttle_features(struct us_data *us, command[0] = 0x40; command[1] = USBAT_CMD_SET_FEAT; - // The only bit relevant to ATA access is bit 6 - // which defines 8 bit data access (set) or 16 bit (unset) + /* + * The only bit relevant to ATA access is bit 6 + * which defines 8 bit data access (set) or 16 bit (unset) + */ command[2] = epp_control; - // If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, - // ET1 and ET2 define an external event to be checked for on event of a - // _read_blocks or _write_blocks operation. The read/write will not take - // place unless the defined trigger signal is active. + /* + * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1, + * ET1 and ET2 define an external event to be checked for on event of a + * _read_blocks or _write_blocks operation. The read/write will not take + * place unless the defined trigger signal is active. + */ command[3] = external_trigger; - // The resultant byte of the mask operation (see mask_byte) is compared for - // equivalence with this test pattern. If equal, the read/write will take - // place. + /* + * The resultant byte of the mask operation (see mask_byte) is compared for + * equivalence with this test pattern. If equal, the read/write will take + * place. + */ command[4] = test_pattern; - // This value is logically ANDed with the status register field specified - // in the read/write command. + /* + * This value is logically ANDed with the status register field specified + * in the read/write command. + */ command[5] = mask_byte; - // If ALQ is set in the qualifier, this field contains the address of the - // registers where the byte count should be read for transferring the data. - // If ALQ is not set, then this field contains the number of bytes to be - // transferred. + /* + * If ALQ is set in the qualifier, this field contains the address of the + * registers where the byte count should be read for transferring the data. + * If ALQ is not set, then this field contains the number of bytes to be + * transferred. + */ command[6] = subcountL; command[7] = subcountH; @@ -273,26 +285,26 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) if (result!=USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - if (*status & 0x01) { // check condition + if (*status & 0x01) { /* check condition */ result = usbat_read(us, USBAT_ATA, 0x10, status); return USB_STOR_TRANSPORT_FAILED; } - if (*status & 0x20) // device fault + if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; - if ((*status & 0x80)==0x00) { // not busy + if ((*status & 0x80)==0x00) { /* not busy */ US_DEBUGP("Waited not busy for %d steps\n", i); return USB_STOR_TRANSPORT_GOOD; } if (i<500) - msleep(10); // 5 seconds + msleep(10); /* 5 seconds */ else if (i<700) - msleep(50); // 10 seconds + msleep(50); /* 10 seconds */ else if (i<1200) - msleep(100); // 50 seconds + msleep(100); /* 50 seconds */ else - msleep(1000); // X minutes + msleep(1000); /* X minutes */ } US_DEBUGP("Waited not busy for %d minutes, timing out.\n", @@ -412,9 +424,12 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, if (i==0) { cmdlen = 16; - // Write to multiple registers - // Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here, - // but that's what came out of the trace every single time. + /* + * Write to multiple registers + * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is + * necessary here, but that's what came out of the + * trace every single time. + */ command[0] = 0x40; command[1] = access | USBAT_CMD_WRITE_REGS; command[2] = 0x07; @@ -426,7 +441,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } else cmdlen = 8; - // Conditionally read or write blocks + /* Conditionally read or write blocks */ command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0); command[cmdlen-7] = access | (direction==DMA_TO_DEVICE ? @@ -456,11 +471,6 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } - - //US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n", - // direction == DMA_TO_DEVICE ? "out" : "in", - // len, use_sg); - result = usb_stor_bulk_transfer_sg(us, pipe, content, len, use_sg, NULL); @@ -508,9 +518,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, if (result!=USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - if (*status & 0x01) // check condition + if (*status & 0x01) /* check condition */ return USB_STOR_TRANSPORT_FAILED; - if (*status & 0x20) // device fault + if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; US_DEBUGP("Redoing %s\n", @@ -547,32 +557,32 @@ static int usbat_multiple_write(struct us_data *us, BUG_ON(num_registers > US_IOBUF_SIZE/2); - // Write to multiple registers, ATA access + /* Write to multiple registers, ATA access */ command[0] = 0x40; command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS; - // No relevance + /* No relevance */ command[2] = 0; command[3] = 0; command[4] = 0; command[5] = 0; - // Number of bytes to be transferred (incl. addresses and data) + /* Number of bytes to be transferred (incl. addresses and data) */ command[6] = LSB_of(num_registers*2); command[7] = MSB_of(num_registers*2); - // The setup command + /* The setup command */ result = usbat_execute_command(us, command, 8); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Create the reg/data, reg/data sequence + /* Create the reg/data, reg/data sequence */ for (i=0; isense_key = 0x02; @@ -795,11 +809,11 @@ static int usbat_flash_check_media(struct us_data *us, return USB_STOR_TRANSPORT_FAILED; } - // Check for media change + /* Check for media change */ rc = usbat_flash_check_media_changed(uio); if (rc == USBAT_FLASH_MEDIA_CHANGED) { - // Reset and re-enable card detect + /* Reset and re-enable card detect */ rc = usbat_device_reset(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; @@ -855,13 +869,13 @@ static int usbat_identify_device(struct us_data *us, if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Check for error bit, or if the command 'fell through' + /* Check for error bit, or if the command 'fell through' */ if (status == 0xA1 || !(status & 0x01)) { - // Device is HP 8200 + /* Device is HP 8200 */ US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); info->devicetype = USBAT_DEV_HP8200; } else { - // Device is a CompactFlash reader/writer + /* Device is a CompactFlash reader/writer */ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); info->devicetype = USBAT_DEV_FLASH; } @@ -916,7 +930,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, if (!reply) return USB_STOR_TRANSPORT_ERROR; - // ATAPI command : IDENTIFY DEVICE + /* ATA command : IDENTIFY DEVICE */ rc = usbat_multiple_write(us, registers, command, 3); if (rc != USB_STOR_XFER_GOOD) { US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); @@ -924,7 +938,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, goto leave; } - // Read device status + /* Read device status */ if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) { rc = USB_STOR_TRANSPORT_ERROR; goto leave; @@ -932,7 +946,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, msleep(100); - // Read the device identification data + /* Read the device identification data */ rc = usbat_read_block(us, reply, 512); if (rc != USB_STOR_TRANSPORT_GOOD) goto leave; @@ -977,19 +991,23 @@ static int usbat_flash_read_data(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) return result; - // we're working in LBA mode. according to the ATA spec, - // we can support up to 28-bit addressing. I don't know if Jumpshot - // supports beyond 24-bit addressing. It's kind of hard to test - // since it requires > 8GB CF card. + /* + * we're working in LBA mode. according to the ATA spec, + * we can support up to 28-bit addressing. I don't know if Jumpshot + * supports beyond 24-bit addressing. It's kind of hard to test + * since it requires > 8GB CF card. + */ if (sector > 0x0FFFFFFF) return USB_STOR_TRANSPORT_ERROR; totallen = sectors * info->ssize; - // Since we don't read more than 64 KB at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we don't read more than 64 KB at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ alloclen = min(totallen, 65536u); buffer = kmalloc(alloclen, GFP_NOIO); @@ -997,27 +1015,29 @@ static int usbat_flash_read_data(struct us_data *us, return USB_STOR_TRANSPORT_ERROR; do { - // loop, never allocate or transfer more than 64k at once - // (min(128k, 255*info->ssize) is the real limit) + /* + * loop, never allocate or transfer more than 64k at once + * (min(128k, 255*info->ssize) is the real limit) + */ len = min(totallen, alloclen); thistime = (len / info->ssize) & 0xff; - // ATAPI command 0x20 (READ SECTORS) - usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20); + /* ATA command 0x20 (READ SECTORS) */ + usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20); - // Write/execute ATAPI read command + /* Write/execute ATA read command */ result = usbat_multiple_write(us, registers, command, 7); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; - // Read the data we just requested + /* Read the data we just requested */ result = usbat_read_blocks(us, buffer, len); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); - // Store the data in the transfer buffer + /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, &sg_idx, &sg_offset, TO_XFER_BUF); @@ -1061,19 +1081,23 @@ static int usbat_flash_write_data(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) return result; - // we're working in LBA mode. according to the ATA spec, - // we can support up to 28-bit addressing. I don't know if Jumpshot - // supports beyond 24-bit addressing. It's kind of hard to test - // since it requires > 8GB CF card. + /* + * we're working in LBA mode. according to the ATA spec, + * we can support up to 28-bit addressing. I don't know if the device + * supports beyond 24-bit addressing. It's kind of hard to test + * since it requires > 8GB media. + */ if (sector > 0x0FFFFFFF) return USB_STOR_TRANSPORT_ERROR; totallen = sectors * info->ssize; - // Since we don't write more than 64 KB at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we don't write more than 64 KB at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ alloclen = min(totallen, 65536u); buffer = kmalloc(alloclen, GFP_NOIO); @@ -1081,24 +1105,26 @@ static int usbat_flash_write_data(struct us_data *us, return USB_STOR_TRANSPORT_ERROR; do { - // loop, never allocate or transfer more than 64k at once - // (min(128k, 255*info->ssize) is the real limit) + /* + * loop, never allocate or transfer more than 64k at once + * (min(128k, 255*info->ssize) is the real limit) + */ len = min(totallen, alloclen); thistime = (len / info->ssize) & 0xff; - // Get the data from the transfer buffer + /* Get the data from the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, &sg_idx, &sg_offset, FROM_XFER_BUF); - // ATAPI command 0x30 (WRITE SECTORS) - usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30); + /* ATA command 0x30 (WRITE SECTORS) */ + usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30); - // Write/execute ATAPI write command + /* Write/execute ATA write command */ result = usbat_multiple_write(us, registers, command, 7); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; - // Write the data + /* Write the data */ result = usbat_write_blocks(us, buffer, len); if (result != USB_STOR_TRANSPORT_GOOD) goto leave; @@ -1169,42 +1195,44 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, srb->transfersize); } - // Since we only read in one block at a time, we have to create - // a bounce buffer and move the data a piece at a time between the - // bounce buffer and the actual transfer buffer. + /* + * Since we only read in one block at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + */ len = (65535/srb->transfersize) * srb->transfersize; US_DEBUGP("Max read is %d bytes\n", len); len = min(len, srb->request_bufflen); buffer = kmalloc(len, GFP_NOIO); - if (buffer == NULL) // bloody hell! + if (buffer == NULL) /* bloody hell! */ return USB_STOR_TRANSPORT_FAILED; sector = short_pack(data[7+3], data[7+2]); sector <<= 16; sector |= short_pack(data[7+5], data[7+4]); transferred = 0; - sg_segment = 0; // for keeping track of where we are in - sg_offset = 0; // the scatter/gather list + sg_segment = 0; /* for keeping track of where we are in */ + sg_offset = 0; /* the scatter/gather list */ while (transferred != srb->request_bufflen) { if (len > srb->request_bufflen - transferred) len = srb->request_bufflen - transferred; - data[3] = len&0xFF; // (cylL) = expected length (L) - data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) + data[3] = len&0xFF; /* (cylL) = expected length (L) */ + data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ - // Fix up the SCSI command sector and num sectors + /* Fix up the SCSI command sector and num sectors */ - data[7+2] = MSB_of(sector>>16); // SCSI command sector + data[7+2] = MSB_of(sector>>16); /* SCSI command sector */ data[7+3] = LSB_of(sector>>16); data[7+4] = MSB_of(sector&0xFFFF); data[7+5] = LSB_of(sector&0xFFFF); if (data[7+0] == GPCMD_READ_CD) data[7+6] = 0; - data[7+7] = MSB_of(len / srb->transfersize); // SCSI command - data[7+8] = LSB_of(len / srb->transfersize); // num sectors + data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */ + data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */ result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, registers, data, 19, @@ -1217,16 +1245,16 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) break; - // Store the data in the transfer buffer + /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, srb, &sg_segment, &sg_offset, TO_XFER_BUF); - // Update the amount transferred and the sector number + /* Update the amount transferred and the sector number */ transferred += len; sector += len / srb->transfersize; - } // while transferred != srb->request_bufflen + } /* while transferred != srb->request_bufflen */ kfree(buffer); return result; @@ -1237,7 +1265,7 @@ static int usbat_select_and_test_registers(struct us_data *us) int selector; unsigned char *status = us->iobuf; - // try device = master, then device = slave. + /* try device = master, then device = slave. */ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) { if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != USB_STOR_XFER_GOOD) @@ -1298,7 +1326,7 @@ int init_usbat(struct us_data *us) memset(us->extra, 0, sizeof(struct usbat_info)); info = (struct usbat_info *) (us->extra); - // Enable peripheral control signals + /* Enable peripheral control signals */ rc = usbat_write_user_io(us, USBAT_UIO_OE1 | USBAT_UIO_OE0, USBAT_UIO_EPAD | USBAT_UIO_1); @@ -1337,7 +1365,7 @@ int init_usbat(struct us_data *us) US_DEBUGP("INIT 5\n"); - // Enable peripheral control signals and card detect + /* Enable peripheral control signals and card detect */ rc = usbat_device_enable_cdt(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; @@ -1364,7 +1392,7 @@ int init_usbat(struct us_data *us) US_DEBUGP("INIT 9\n"); - // At this point, we need to detect which device we are using + /* At this point, we need to detect which device we are using */ if (usbat_set_transport(us, info)) return USB_STOR_TRANSPORT_ERROR; @@ -1414,10 +1442,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) data[0] = 0x00; data[1] = 0x00; data[2] = 0x00; - data[3] = len&0xFF; // (cylL) = expected length (L) - data[4] = (len>>8)&0xFF; // (cylH) = expected length (H) - data[5] = 0xB0; // (device sel) = slave - data[6] = 0xA0; // (command) = ATA PACKET COMMAND + data[3] = len&0xFF; /* (cylL) = expected length (L) */ + data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ + data[5] = 0xB0; /* (device sel) = slave */ + data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */ for (i=7; i<19; i++) { registers[i] = 0x10; @@ -1466,13 +1494,15 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) return result; } - // Write the 12-byte command header. - - // If the command is BLANK then set the timer for 75 minutes. - // Otherwise set it for 10 minutes. - - // NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW - // AT SPEED 4 IS UNRELIABLE!!! + /* + * Write the 12-byte command header. + * + * If the command is BLANK then set the timer for 75 minutes. + * Otherwise set it for 10 minutes. + * + * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW + * AT SPEED 4 IS UNRELIABLE!!! + */ if ( (result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12, @@ -1481,19 +1511,18 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) return result; } - // If there is response data to be read in - // then do it here. + /* If there is response data to be read in then do it here. */ if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) { - // How many bytes to read in? Check cylL register + /* How many bytes to read in? Check cylL register */ if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != USB_STOR_XFER_GOOD) { return USB_STOR_TRANSPORT_ERROR; } - if (len > 0xFF) { // need to read cylH also + if (len > 0xFF) { /* need to read cylH also */ len = *status; if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != USB_STOR_XFER_GOOD) { @@ -1556,13 +1585,16 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + /* hard coded 512 byte sectors as per ATA spec */ + info->ssize = 0x200; US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", info->sectors, info->ssize); - // build the reply - // note: must return the sector number of the last sector, - // *not* the total number of sectors + /* + * build the reply + * note: must return the sector number of the last sector, + * *not* the total number of sectors + */ ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); usb_stor_set_xfer_buf(ptr, 8, srb); @@ -1586,7 +1618,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == READ_12) { - // I don't think we'll ever see a READ_12 but support it anyway... + /* + * I don't think we'll ever see a READ_12 but support it anyway + */ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); @@ -1608,7 +1642,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == WRITE_12) { - // I don't think we'll ever see a WRITE_12 but support it anyway... + /* + * I don't think we'll ever see a WRITE_12 but support it anyway + */ block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); @@ -1645,8 +1681,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { - // sure. whatever. not like we can stop the user from popping - // the media out of the device (no locking doors, etc) + /* + * sure. whatever. not like we can stop the user from popping + * the media out of the device (no locking doors, etc) + */ return USB_STOR_TRANSPORT_GOOD; } diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h index 5b8e867e2ae5..25e7d8b340b8 100644 --- a/drivers/usb/storage/shuttle_usbat.h +++ b/drivers/usb/storage/shuttle_usbat.h @@ -55,8 +55,8 @@ #define USBAT_UIO_WRITE 0 /* Qualifier bits */ -#define USBAT_QUAL_FCQ 0x20 // full compare -#define USBAT_QUAL_ALQ 0x10 // auto load subcount +#define USBAT_QUAL_FCQ 0x20 /* full compare */ +#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ /* USBAT Flash Media status types */ #define USBAT_FLASH_MEDIA_NONE 0 @@ -67,39 +67,39 @@ #define USBAT_FLASH_MEDIA_CHANGED 1 /* USBAT ATA registers */ -#define USBAT_ATA_DATA 0x10 // read/write data (R/W) -#define USBAT_ATA_FEATURES 0x11 // set features (W) -#define USBAT_ATA_ERROR 0x11 // error (R) -#define USBAT_ATA_SECCNT 0x12 // sector count (R/W) -#define USBAT_ATA_SECNUM 0x13 // sector number (R/W) -#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W) -#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W) -#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W) -#define USBAT_ATA_STATUS 0x17 // device status (R) -#define USBAT_ATA_CMD 0x17 // device command (W) -#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R) +#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ +#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ +#define USBAT_ATA_ERROR 0x11 /* error (R) */ +#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ +#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ +#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ +#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ +#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ +#define USBAT_ATA_STATUS 0x17 /* device status (R) */ +#define USBAT_ATA_CMD 0x17 /* device command (W) */ +#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ /* USBAT User I/O Data registers */ -#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals -#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only) - // CDT = ACKD & !UI1 & !UI0 -#define USBAT_UIO_1 0x20 // I/O 1 -#define USBAT_UIO_0 0x10 // I/O 0 -#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode -#define USBAT_UIO_UI1 0x04 // Input 1 -#define USBAT_UIO_UI0 0x02 // Input 0 -#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP) +#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ +#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ + /* CDT = ACKD & !UI1 & !UI0 */ +#define USBAT_UIO_1 0x20 /* I/O 1 */ +#define USBAT_UIO_0 0x10 /* I/O 0 */ +#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ +#define USBAT_UIO_UI1 0x04 /* Input 1 */ +#define USBAT_UIO_UI0 0x02 /* Input 0 */ +#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ /* USBAT User I/O Enable registers */ -#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral -#define USBAT_UIO_ACKD 0x40 // Enable Card Detect -#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input - // If ACKD=1, set OE1 to 1 also. -#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input -#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip +#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ +#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ +#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ + /* If ACKD=1, set OE1 to 1 also. */ +#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ +#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ /* USBAT Features */ -#define USBAT_FEAT_ETEN 0x80 // External trigger enable +#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ #define USBAT_FEAT_U1 0x08 #define USBAT_FEAT_U0 0x04 #define USBAT_FEAT_ET1 0x02 @@ -112,12 +112,12 @@ struct usbat_info { int devicetype; /* Used for Flash readers only */ - unsigned long sectors; // total sector count - unsigned long ssize; // sector size in bytes + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ unsigned char sense_key; - unsigned long sense_asc; // additional sense code - unsigned long sense_ascq; // additional sense code qualifier + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ }; #endif diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h index 8d9e0663f8fe..0a362cc781ad 100644 --- a/drivers/usb/storage/transport.h +++ b/drivers/usb/storage/transport.h @@ -50,7 +50,7 @@ #define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ #define US_PR_BULK 0x50 /* bulk only */ #ifdef CONFIG_USB_STORAGE_USBAT -#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */ +#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */ #endif #ifdef CONFIG_USB_STORAGE_SDDR09 #define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b79dad1b598c..71d051d97b77 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -71,12 +71,12 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, "HP", "CD-Writer+ 8200e", - US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), + US_SC_8070, US_PR_USBAT, init_usbat, 0), UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, "HP", "CD-Writer+ CD-4e", - US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0), + US_SC_8070, US_PR_USBAT, init_usbat, 0), #endif /* Patch submitted by Mihnea-Costin Grigore */ @@ -333,9 +333,9 @@ UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100, #ifdef CONFIG_USB_STORAGE_USBAT UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, - "SCM", - "SCM USBAT-02", - US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat, + "Shuttle/SCM", + "USBAT-02", + US_SC_SCSI, US_PR_USBAT, init_usbat, US_FL_SINGLE_LUN), #endif diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index f9a9bfa1aef5..5164900e40c1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -555,8 +555,8 @@ static int get_transport(struct us_data *us) break; #ifdef CONFIG_USB_STORAGE_USBAT - case US_PR_SCM_ATAPI: - us->transport_name = "SCM/ATAPI"; + case US_PR_USBAT: + us->transport_name = "Shuttle USBAT"; us->transport = usbat_transport; us->transport_reset = usb_stor_CB_reset; us->max_lun = 1; -- GitLab From 094ec604721ed2a9a7ed6dfe40fd699b2f53a4c3 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Fri, 30 Sep 2005 12:58:13 +0100 Subject: [PATCH 0796/1519] [PATCH] usb-storage: Readd missing SDDR-05b unusual_devs entry Just noticed that the SDDR-05b entry is missing for the shuttle_usbat driver. Looking through BK history it was removed in this patch: http://linux.bkbits.net:8080/linux-2.6/gnupatch@42435730FZQ2XCA6Qv5GPGD4pC4laQ However, at merge time, it looks like the duplicate was already removed, compare these two revisions: http://linux.bkbits.net:8080/linux-2.6/anno/drivers/usb/storage/unusual_devs.h@1.152 http://linux.bkbits.net:8080/linux-2.6/anno/drivers/usb/storage/unusual_devs.h@1.153 Signed-off-by: Daniel Drake Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/unusual_devs.h | 8 ++++++++ 1 file changed, 8 insertions(+) --- drivers/usb/storage/unusual_devs.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 71d051d97b77..ee9f0502e055 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -702,6 +702,14 @@ UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN ), +#ifdef CONFIG_USB_STORAGE_USBAT +UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005, + "Sandisk", + "ImageMate SDDR-05b", + US_SC_SCSI, US_PR_USBAT, init_usbat, + US_FL_SINGLE_LUN ), +#endif + UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, "Sandisk", "ImageMate SDDR-12", -- GitLab From e4a16e0c10a272e53c4a129b155dd711196b1d93 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Fri, 30 Sep 2005 00:20:15 -0700 Subject: [PATCH 0797/1519] [PATCH] Add unusual_dev for iBeat This patch adds the US_FL_IGNORE_RESIDUE flag for the TrekStor i.Beat Joy 2.0. Original version of this patch was sent by Stefan Werner with test/rediff/etc. by me. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ee9f0502e055..730ba8dde9bd 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -106,6 +106,13 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* Reported by Stefan Werner */ +UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, + "TrekStor", + "i.Beat Joy 2.0", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- GitLab From 880a9b5e7f70632ab60131ce3027da1c63fcd39e Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Fri, 30 Sep 2005 00:27:36 -0700 Subject: [PATCH 0798/1519] [PATCH] Add unusual_devs for iPod Nano This adds US_FL_FIX_CAPACITY for yet _another_ entire block of Apple productIds. They really can't seem to get this right. This one is for the iPod Nano. Reported by Tyson Vinson . Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) --- drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 730ba8dde9bd..a11701840262 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -605,6 +605,16 @@ UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* + * Reported by Tyson Vinson + * This particular productId is the iPod Nano + */ +UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999, + "Apple", + "iPod", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + #ifdef CONFIG_USB_STORAGE_JUMPSHOT UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, "Lexar", -- GitLab From 3f8c03ee05801bf8539dd136d9246a416c45052a Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Wed, 28 Sep 2005 21:30:12 +0200 Subject: [PATCH 0799/1519] [PATCH] usb/input/touchkit: add more device IDs add two more device IDs from eGalax' programming guide. thanks to Jonathan Hopper for pointing out. Signed-off-by: Daniel Ritz Signed-off-by: Greg Kroah-Hartman drivers/usb/input/touchkitusb.c | 2 ++ 1 file changed, 2 insertions(+) --- drivers/usb/input/touchkitusb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 3766ccc271be..0043e6ebcd1f 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -75,7 +75,9 @@ struct touchkit_usb { static struct usb_device_id touchkit_devices[] = { {USB_DEVICE(0x3823, 0x0001)}, + {USB_DEVICE(0x0123, 0x0001)}, {USB_DEVICE(0x0eef, 0x0001)}, + {USB_DEVICE(0x0eef, 0x0002)}, {} }; -- GitLab From a922c68732725866c88457026cf06a7620846506 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 6 Oct 2005 16:38:45 -0400 Subject: [PATCH 0800/1519] [PATCH] g_file_storage: fix obscure race condition This patch (as575) fixes an unlikely race in the g_file_storage driver. The problem can occur only when the driver is unbound before its initialization routine has finished. I also took the opportunity to replace kmalloc/memset with kzalloc. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 241c570e541c..86a6aeb9ed76 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -3823,12 +3823,11 @@ static int __init fsg_bind(struct usb_gadget *gadget) /* Create the LUNs, open their backing files, and register the * LUN devices in sysfs. */ - fsg->luns = kmalloc(i * sizeof(struct lun), GFP_KERNEL); + fsg->luns = kzalloc(i * sizeof(struct lun), GFP_KERNEL); if (!fsg->luns) { rc = -ENOMEM; goto out; } - memset(fsg->luns, 0, i * sizeof(struct lun)); fsg->nluns = i; for (i = 0; i < fsg->nluns; ++i) { @@ -3989,6 +3988,11 @@ static int __init fsg_bind(struct usb_gadget *gadget) mod_data.removable, mod_data.can_stall, mod_data.buflen); DBG(fsg, "I/O thread pid: %d\n", fsg->thread_task->pid); + + set_bit(REGISTERED, &fsg->atomic_bitflags); + + /* Tell the thread to start working */ + wake_up_process(fsg->thread_task); return 0; autoconf_fail: @@ -4051,10 +4055,9 @@ static int __init fsg_alloc(void) { struct fsg_dev *fsg; - fsg = kmalloc(sizeof *fsg, GFP_KERNEL); + fsg = kzalloc(sizeof *fsg, GFP_KERNEL); if (!fsg) return -ENOMEM; - memset(fsg, 0, sizeof *fsg); spin_lock_init(&fsg->lock); init_rwsem(&fsg->filesem); init_waitqueue_head(&fsg->thread_wqh); @@ -4080,15 +4083,9 @@ static int __init fsg_init(void) if ((rc = fsg_alloc()) != 0) return rc; fsg = the_fsg; - if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) { + if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) fsg_free(fsg); - return rc; - } - set_bit(REGISTERED, &fsg->atomic_bitflags); - - /* Tell the thread to start working */ - wake_up_process(fsg->thread_task); - return 0; + return rc; } module_init(fsg_init); -- GitLab From bb200f6eac6372839921be1fe87c1f5c292a7bd6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 3 Oct 2005 16:36:29 -0400 Subject: [PATCH 0801/1519] [PATCH] UHCI: unify BIOS handoff and driver reset code This patch (as574) updates the PCI BIOS usb-handoff code for UHCI controllers, making it work like the reset routines in uhci-hcd. This allows uhci-hcd to drop its own routines in favor of the new ones (code-sharing). Once the patch is merged we can turn the usb-handoff option on permanently, as far as UHCI is concerned. OHCI and EHCI may still have some issues. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 142 +++++++++++++++++++++++----------- drivers/usb/host/uhci-hcd.c | 76 +++--------------- 2 files changed, 106 insertions(+), 112 deletions(-) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 49f7381a6fd3..f7411ca48835 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -9,6 +9,12 @@ */ #include +#ifdef CONFIG_USB_DEBUG +#define DEBUG +#else +#undef DEBUG +#endif + #include #include #include @@ -46,13 +52,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, qui #define UHCI_USBLEGSUP 0xc0 /* legacy support */ #define UHCI_USBCMD 0 /* command register */ -#define UHCI_USBSTS 2 /* status register */ #define UHCI_USBINTR 4 /* interrupt register */ -#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ -#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */ -#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */ -#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */ -#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */ +#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ +#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ +#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */ +#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */ +#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */ +#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */ +#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */ #define OHCI_CONTROL 0x04 #define OHCI_CMDSTATUS 0x08 @@ -84,57 +91,100 @@ static int __init usb_handoff_early(char *str) } __setup("usb-handoff", usb_handoff_early); -static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) +/* + * Make sure the controller is completely inactive, unable to + * generate interrupts or do DMA. + */ +void uhci_reset_hc(struct pci_dev *pdev, unsigned long base) { - unsigned long base = 0; - int wait_time, delta; - u16 val, sts; - int i; + /* Turn off PIRQ enable and SMI enable. (This also turns off the + * BIOS's USB Legacy Support.) Turn off all the R/WC bits too. + */ + pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC); - for (i = 0; i < PCI_ROM_RESOURCE; i++) - if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { - base = pci_resource_start(pdev, i); - break; - } + /* Reset the HC - this will force us to get a + * new notification of any already connected + * ports due to the virtual disconnect that it + * implies. + */ + outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD); + mb(); + udelay(5); + if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET) + dev_warn(&pdev->dev, "HCRESET not completed yet!\n"); + + /* Just to be safe, disable interrupt requests and + * make sure the controller is stopped. + */ + outw(0, base + UHCI_USBINTR); + outw(0, base + UHCI_USBCMD); +} +EXPORT_SYMBOL_GPL(uhci_reset_hc); - if (!base) - return; +/* + * Initialize a controller that was newly discovered or has just been + * resumed. In either case we can't be sure of its previous state. + * + * Returns: 1 if the controller was reset, 0 otherwise. + */ +int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base) +{ + u16 legsup; + unsigned int cmd, intr; /* - * stop controller + * When restarting a suspended controller, we expect all the + * settings to be the same as we left them: + * + * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP; + * Controller is stopped and configured with EGSM set; + * No interrupts enabled except possibly Resume Detect. + * + * If any of these conditions are violated we do a complete reset. */ - sts = inw(base + UHCI_USBSTS); - val = inw(base + UHCI_USBCMD); - val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE); - outw(val, base + UHCI_USBCMD); + pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup); + if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) { + dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n", + __FUNCTION__, legsup); + goto reset_needed; + } - /* - * wait while it stops if it was running - */ - if ((sts & UHCI_USBSTS_HALTED) == 0) - { - wait_time = 1000; - delta = 100; + cmd = inw(base + UHCI_USBCMD); + if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) || + !(cmd & UHCI_USBCMD_EGSM)) { + dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n", + __FUNCTION__, cmd); + goto reset_needed; + } - do { - outw(0x1f, base + UHCI_USBSTS); - udelay(delta); - wait_time -= delta; - val = inw(base + UHCI_USBSTS); - if (val & UHCI_USBSTS_HALTED) - break; - } while (wait_time > 0); + intr = inw(base + UHCI_USBINTR); + if (intr & (~UHCI_USBINTR_RESUME)) { + dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n", + __FUNCTION__, intr); + goto reset_needed; } + return 0; - /* - * disable interrupts & legacy support - */ - outw(0, base + UHCI_USBINTR); - outw(0x1f, base + UHCI_USBSTS); - pci_read_config_word(pdev, UHCI_USBLEGSUP, &val); - if (val & 0xbf) - pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT); +reset_needed: + dev_dbg(&pdev->dev, "Performing full reset\n"); + uhci_reset_hc(pdev, base); + return 1; +} +EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc); + +static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev) +{ + unsigned long base = 0; + int i; + + for (i = 0; i < PCI_ROM_RESOURCE; i++) + if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) { + base = pci_resource_start(pdev, i); + break; + } + if (base) + uhci_check_and_reset_hc(pdev, base); } static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 34c9dbc6a156..6df555e3d97c 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -101,37 +101,16 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci); #include "uhci-q.c" #include "uhci-hub.c" +extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); +extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); + /* - * Make sure the controller is completely inactive, unable to - * generate interrupts or do DMA. + * Finish up a host controller reset and update the recorded state. */ -static void reset_hc(struct uhci_hcd *uhci) +static void finish_reset(struct uhci_hcd *uhci) { int port; - /* Turn off PIRQ enable and SMI enable. (This also turns off the - * BIOS's USB Legacy Support.) Turn off all the R/WC bits too. - */ - pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, - USBLEGSUP_RWC); - - /* Reset the HC - this will force us to get a - * new notification of any already connected - * ports due to the virtual disconnect that it - * implies. - */ - outw(USBCMD_HCRESET, uhci->io_addr + USBCMD); - mb(); - udelay(5); - if (inw(uhci->io_addr + USBCMD) & USBCMD_HCRESET) - dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n"); - - /* Just to be safe, disable interrupt requests and - * make sure the controller is stopped. - */ - outw(0, uhci->io_addr + USBINTR); - outw(0, uhci->io_addr + USBCMD); - /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect * bits in the port status and control registers. * We have to clear them by hand. @@ -153,7 +132,8 @@ static void reset_hc(struct uhci_hcd *uhci) */ static void hc_died(struct uhci_hcd *uhci) { - reset_hc(uhci); + uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr); + finish_reset(uhci); uhci->hc_inaccessible = 1; } @@ -163,44 +143,8 @@ static void hc_died(struct uhci_hcd *uhci) */ static void check_and_reset_hc(struct uhci_hcd *uhci) { - u16 legsup; - unsigned int cmd, intr; - - /* - * When restarting a suspended controller, we expect all the - * settings to be the same as we left them: - * - * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP; - * Controller is stopped and configured with EGSM set; - * No interrupts enabled except possibly Resume Detect. - * - * If any of these conditions are violated we do a complete reset. - */ - pci_read_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, &legsup); - if (legsup & ~(USBLEGSUP_RO | USBLEGSUP_RWC)) { - dev_dbg(uhci_dev(uhci), "%s: legsup = 0x%04x\n", - __FUNCTION__, legsup); - goto reset_needed; - } - - cmd = inw(uhci->io_addr + USBCMD); - if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) { - dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n", - __FUNCTION__, cmd); - goto reset_needed; - } - - intr = inw(uhci->io_addr + USBINTR); - if (intr & (~USBINTR_RESUME)) { - dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n", - __FUNCTION__, intr); - goto reset_needed; - } - return; - -reset_needed: - dev_dbg(uhci_dev(uhci), "Performing full reset\n"); - reset_hc(uhci); + if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr)) + finish_reset(uhci); } /* @@ -714,7 +658,7 @@ static void uhci_stop(struct usb_hcd *hcd) spin_lock_irq(&uhci->lock); if (!uhci->hc_inaccessible) - reset_hc(uhci); + hc_died(uhci); uhci_scan_schedule(uhci, NULL); spin_unlock_irq(&uhci->lock); -- GitLab From 0c0382e32d46f606951010b202382be14d180a17 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 13 Oct 2005 17:08:02 -0400 Subject: [PATCH 0802/1519] [PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 16 ++++++---------- drivers/usb/core/hcd.h | 23 +++++++++++++++++------ drivers/usb/core/hub.c | 8 ++++---- drivers/usb/gadget/dummy_hcd.c | 22 ++++------------------ drivers/usb/host/ehci-hub.c | 8 ++++---- drivers/usb/host/ehci-pci.c | 4 ++-- drivers/usb/host/isp116x-hcd.c | 12 ++++++------ drivers/usb/host/ohci-au1xxx.c | 4 ++-- drivers/usb/host/ohci-hub.c | 6 +++--- drivers/usb/host/ohci-lh7a404.c | 4 ++-- drivers/usb/host/ohci-omap.c | 4 ++-- drivers/usb/host/ohci-pci.c | 4 ++-- drivers/usb/host/ohci-ppc-soc.c | 4 ++-- drivers/usb/host/ohci-pxa27x.c | 4 ++-- drivers/usb/host/ohci-s3c2410.c | 4 ++-- drivers/usb/host/ohci-sa1111.c | 4 ++-- drivers/usb/host/sl811-hcd.c | 16 ++++++++-------- drivers/usb/host/uhci-hcd.c | 4 ++-- 18 files changed, 72 insertions(+), 79 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index b7bb8dd1894a..9ad3912a5ed7 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1433,16 +1433,16 @@ hcd_endpoint_disable (struct usb_device *udev, struct usb_host_endpoint *ep) #ifdef CONFIG_PM -static int hcd_hub_suspend (struct usb_bus *bus) +int hcd_bus_suspend (struct usb_bus *bus) { struct usb_hcd *hcd; int status; hcd = container_of (bus, struct usb_hcd, self); - if (!hcd->driver->hub_suspend) + if (!hcd->driver->bus_suspend) return -ENOENT; hcd->state = HC_STATE_QUIESCING; - status = hcd->driver->hub_suspend (hcd); + status = hcd->driver->bus_suspend (hcd); if (status == 0) hcd->state = HC_STATE_SUSPENDED; else @@ -1451,18 +1451,18 @@ static int hcd_hub_suspend (struct usb_bus *bus) return status; } -static int hcd_hub_resume (struct usb_bus *bus) +int hcd_bus_resume (struct usb_bus *bus) { struct usb_hcd *hcd; int status; hcd = container_of (bus, struct usb_hcd, self); - if (!hcd->driver->hub_resume) + if (!hcd->driver->bus_resume) return -ENOENT; if (hcd->state == HC_STATE_RUNNING) return 0; hcd->state = HC_STATE_RESUMING; - status = hcd->driver->hub_resume (hcd); + status = hcd->driver->bus_resume (hcd); if (status == 0) hcd->state = HC_STATE_RUNNING; else { @@ -1590,10 +1590,6 @@ static struct usb_operations usb_hcd_operations = { .buffer_alloc = hcd_buffer_alloc, .buffer_free = hcd_buffer_free, .disable = hcd_endpoint_disable, -#ifdef CONFIG_PM - .hub_suspend = hcd_hub_suspend, - .hub_resume = hcd_hub_resume, -#endif }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 74757fc1a99f..d8f0d29a45b7 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -154,10 +154,6 @@ struct usb_operations { void (*disable)(struct usb_device *udev, struct usb_host_endpoint *ep); - - /* global suspend/resume of bus */ - int (*hub_suspend)(struct usb_bus *); - int (*hub_resume)(struct usb_bus *); }; /* each driver provides one of these, and hardware init support */ @@ -212,8 +208,8 @@ struct hc_driver { int (*hub_control) (struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); - int (*hub_suspend)(struct usb_hcd *); - int (*hub_resume)(struct usb_hcd *); + int (*bus_suspend)(struct usb_hcd *); + int (*bus_resume)(struct usb_hcd *); int (*start_port_reset)(struct usb_hcd *, unsigned port_num); void (*hub_irq_enable)(struct usb_hcd *); /* Needed only if port-change IRQs are level-triggered */ @@ -379,6 +375,21 @@ extern int usb_find_interface_driver (struct usb_device *dev, #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) +#ifdef CONFIG_PM +extern int hcd_bus_suspend (struct usb_bus *bus); +extern int hcd_bus_resume (struct usb_bus *bus); +#else +static inline int hcd_bus_suspend(struct usb_bus *bus) +{ + return 0; +} + +static inline int hcd_bus_resume (struct usb_bus *bus) +{ + return 0; +} +#endif /* CONFIG_PM */ + /* * USB device fs stuff */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e2802bf18095..273e6ccca213 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1917,8 +1917,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) /* "global suspend" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; - if (bus && bus->op->hub_suspend) { - int status = bus->op->hub_suspend (bus); + if (bus) { + int status = hcd_bus_suspend (bus); if (status != 0) { dev_dbg(&hdev->dev, "'global' suspend %d\n", @@ -1943,8 +1943,8 @@ static int hub_resume(struct usb_interface *intf) /* "global resume" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; - if (bus && bus->op->hub_resume) { - status = bus->op->hub_resume (bus); + if (bus) { + status = hcd_bus_resume (bus); if (status) { dev_dbg(&intf->dev, "'global' resume %d\n", status); diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 503201764f6b..c605aaeed636 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1751,7 +1751,7 @@ static int dummy_hub_control ( return retval; } -static int dummy_hub_suspend (struct usb_hcd *hcd) +static int dummy_bus_suspend (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); @@ -1762,7 +1762,7 @@ static int dummy_hub_suspend (struct usb_hcd *hcd) return 0; } -static int dummy_hub_resume (struct usb_hcd *hcd) +static int dummy_bus_resume (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); @@ -1894,8 +1894,8 @@ static const struct hc_driver dummy_hcd = { .hub_status_data = dummy_hub_status, .hub_control = dummy_hub_control, - .hub_suspend = dummy_hub_suspend, - .hub_resume = dummy_hub_resume, + .bus_suspend = dummy_bus_suspend, + .bus_resume = dummy_bus_resume, }; static int dummy_hcd_probe (struct device *dev) @@ -1936,13 +1936,6 @@ static int dummy_hcd_suspend (struct device *dev, pm_message_t state) dev_dbg (dev, "%s\n", __FUNCTION__); hcd = dev_get_drvdata (dev); -#ifndef CONFIG_USB_SUSPEND - /* Otherwise this would never happen */ - usb_lock_device (hcd->self.root_hub); - dummy_hub_suspend (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - hcd->state = HC_STATE_SUSPENDED; return 0; } @@ -1955,13 +1948,6 @@ static int dummy_hcd_resume (struct device *dev) hcd = dev_get_drvdata (dev); hcd->state = HC_STATE_RUNNING; -#ifndef CONFIG_USB_SUSPEND - /* Otherwise this would never happen */ - usb_lock_device (hcd->self.root_hub); - dummy_hub_resume (hcd); - usb_unlock_device (hcd->self.root_hub); -#endif - usb_hcd_poll_rh_status (hcd); return 0; } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 18d3f2270316..88cb4ada686e 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -30,7 +30,7 @@ #ifdef CONFIG_PM -static int ehci_hub_suspend (struct usb_hcd *hcd) +static int ehci_bus_suspend (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); int port; @@ -83,7 +83,7 @@ static int ehci_hub_suspend (struct usb_hcd *hcd) /* caller has locked the root hub, and should reset/reinit on error */ -static int ehci_hub_resume (struct usb_hcd *hcd) +static int ehci_bus_resume (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; @@ -159,8 +159,8 @@ static int ehci_hub_resume (struct usb_hcd *hcd) #else -#define ehci_hub_suspend NULL -#define ehci_hub_resume NULL +#define ehci_bus_suspend NULL +#define ehci_bus_resume NULL #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 66ebf75b2037..8bbc8dfe19f3 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -363,8 +363,8 @@ static const struct hc_driver ehci_pci_hc_driver = { */ .hub_status_data = ehci_hub_status_data, .hub_control = ehci_hub_control, - .hub_suspend = ehci_hub_suspend, - .hub_resume = ehci_hub_resume, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index f68220fc53fd..ddb8fc591466 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1160,7 +1160,7 @@ static int isp116x_hub_control(struct usb_hcd *hcd, #ifdef CONFIG_PM -static int isp116x_hub_suspend(struct usb_hcd *hcd) +static int isp116x_bus_suspend(struct usb_hcd *hcd) { struct isp116x *isp116x = hcd_to_isp116x(hcd); unsigned long flags; @@ -1200,7 +1200,7 @@ static int isp116x_hub_suspend(struct usb_hcd *hcd) return ret; } -static int isp116x_hub_resume(struct usb_hcd *hcd) +static int isp116x_bus_resume(struct usb_hcd *hcd) { struct isp116x *isp116x = hcd_to_isp116x(hcd); u32 val; @@ -1266,8 +1266,8 @@ static int isp116x_hub_resume(struct usb_hcd *hcd) #else -#define isp116x_hub_suspend NULL -#define isp116x_hub_resume NULL +#define isp116x_bus_suspend NULL +#define isp116x_bus_resume NULL #endif @@ -1626,8 +1626,8 @@ static struct hc_driver isp116x_hc_driver = { .hub_status_data = isp116x_hub_status_data, .hub_control = isp116x_hub_control, - .hub_suspend = isp116x_hub_suspend, - .hub_resume = isp116x_hub_resume, + .bus_suspend = isp116x_bus_suspend, + .bus_resume = isp116x_bus_resume, }; /*----------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 550d67a554f6..ac463c493035 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -215,8 +215,8 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 39a60e731ec2..e01e77bc324b 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -45,7 +45,7 @@ static void dl_done_list (struct ohci_hcd *, struct pt_regs *); static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *); static int ohci_restart (struct ohci_hcd *ohci); -static int ohci_hub_suspend (struct usb_hcd *hcd) +static int ohci_bus_suspend (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int status = 0; @@ -135,7 +135,7 @@ static inline struct ed *find_head (struct ed *ed) } /* caller has locked the root hub */ -static int ohci_hub_resume (struct usb_hcd *hcd) +static int ohci_bus_resume (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); u32 temp, enables; @@ -362,7 +362,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) && usb_trylock_device (hcd->self.root_hub) ) { ohci_vdbg (ohci, "autosuspend\n"); - (void) ohci_hub_suspend (hcd); + (void) ohci_bus_suspend (hcd); usb_unlock_device (hcd->self.root_hub); } #endif diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 71d975ae78bd..e2ed55b69f86 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -194,8 +194,8 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index b3498b9b965f..982cdca22516 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -421,8 +421,8 @@ static const struct hc_driver ohci_omap_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 99a0ad41aec5..a8dde8b75691 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -195,8 +195,8 @@ static const struct hc_driver ohci_pci_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index ec20710e99fe..228845eb7eab 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -164,8 +164,8 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 2e7b48502a3d..d287dcccd415 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -279,8 +279,8 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 922e2a6f46ef..3225d455f459 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -449,8 +449,8 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { .hub_status_data = ohci_s3c2410_hub_status_data, .hub_control = ohci_s3c2410_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 13324b7f9c59..fb3221ebbb29 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -236,8 +236,8 @@ static const struct hc_driver ohci_sa1111_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, #ifdef CONFIG_PM - .hub_suspend = ohci_hub_suspend, - .hub_resume = ohci_hub_resume, + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif .start_port_reset = ohci_start_port_reset, }; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index b5e7a478bc01..1e47c1f86e70 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1363,7 +1363,7 @@ sl811h_hub_control( #ifdef CONFIG_PM static int -sl811h_hub_suspend(struct usb_hcd *hcd) +sl811h_bus_suspend(struct usb_hcd *hcd) { // SOFs off DBG("%s\n", __FUNCTION__); @@ -1371,7 +1371,7 @@ sl811h_hub_suspend(struct usb_hcd *hcd) } static int -sl811h_hub_resume(struct usb_hcd *hcd) +sl811h_bus_resume(struct usb_hcd *hcd) { // SOFs on DBG("%s\n", __FUNCTION__); @@ -1380,8 +1380,8 @@ sl811h_hub_resume(struct usb_hcd *hcd) #else -#define sl811h_hub_suspend NULL -#define sl811h_hub_resume NULL +#define sl811h_bus_suspend NULL +#define sl811h_bus_resume NULL #endif @@ -1623,8 +1623,8 @@ static struct hc_driver sl811h_hc_driver = { */ .hub_status_data = sl811h_hub_status_data, .hub_control = sl811h_hub_control, - .hub_suspend = sl811h_hub_suspend, - .hub_resume = sl811h_hub_resume, + .bus_suspend = sl811h_bus_suspend, + .bus_resume = sl811h_bus_resume, }; /*-------------------------------------------------------------------------*/ @@ -1791,7 +1791,7 @@ sl811h_suspend(struct device *dev, pm_message_t state) int retval = 0; if (state.event == PM_EVENT_FREEZE) - retval = sl811h_hub_suspend(hcd); + retval = sl811h_bus_suspend(hcd); else if (state.event == PM_EVENT_SUSPEND) port_power(sl811, 0); if (retval == 0) @@ -1816,7 +1816,7 @@ sl811h_resume(struct device *dev) } dev->power.power_state = PMSG_ON; - return sl811h_hub_resume(hcd); + return sl811h_bus_resume(hcd); } #else diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6df555e3d97c..72cd1576d20c 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -804,8 +804,8 @@ static const struct hc_driver uhci_driver = { #ifdef CONFIG_PM .suspend = uhci_suspend, .resume = uhci_resume, - .hub_suspend = uhci_rh_suspend, - .hub_resume = uhci_rh_resume, + .bus_suspend = uhci_rh_suspend, + .bus_resume = uhci_rh_resume, #endif .stop = uhci_stop, -- GitLab From b81d34363c0b17c47f4ef63d5888c4f47f315d29 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 13 Oct 2005 17:00:24 -0400 Subject: [PATCH 0803/1519] [PATCH] UHCI: Improve handling of iso TDs The uhci-hcd driver is fairly lax about the way it handles isochronous transfers. This patch (as579) improves it in three respects: TDs for a new URB aren't added to the schedule until all of them have been allocated. This way there's no risk of the controller executing some of them when an allocation fails. TDs for an unlinked URB are removed from the schedule as soon as the URB is unlinked, rather than waiting until the URB is given back. This way there's no risk of the controller still executing a TD after the URB completes. The urb->error_count values are now reported correctly. Although since they aren't used in any drivers except for debug messages in the system log, probably nobody cares. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-q.c | 39 ++++++++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 13 deletions(-) diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 51de06bc438d..7e46887d9e12 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -108,13 +108,16 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, } } -static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td) +static inline void uhci_remove_td_frame_list(struct uhci_hcd *uhci, + struct uhci_td *td) { /* If it's not inserted, don't remove it */ - if (td->frame == -1 && list_empty(&td->fl_list)) + if (td->frame == -1) { + WARN_ON(!list_empty(&td->fl_list)); return; + } - if (td->frame != -1 && uhci->frame_cpu[td->frame] == td) { + if (uhci->frame_cpu[td->frame] == td) { if (list_empty(&td->fl_list)) { uhci->frame[td->frame] = td->link; uhci->frame_cpu[td->frame] = NULL; @@ -132,13 +135,20 @@ static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td) ptd->link = td->link; } - wmb(); - td->link = UHCI_PTR_TERM; - list_del_init(&td->fl_list); td->frame = -1; } +static void unlink_isochronous_tds(struct uhci_hcd *uhci, struct urb *urb) +{ + struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv; + struct uhci_td *td; + + list_for_each_entry(td, &urbp->td_list, list) + uhci_remove_td_frame_list(uhci, td); + wmb(); +} + /* * Inserts a td list into qh. */ @@ -498,7 +508,6 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb) list_for_each_entry_safe(td, tmp, &urbp->td_list, list) { uhci_remove_td_from_urb(td); - uhci_remove_td(uhci, td); list_add(&td->remove_list, &uhci->td_remove_list); } @@ -1068,6 +1077,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) struct uhci_td *td; int i, ret, frame; int status, destination; + struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv; status = TD_CTRL_ACTIVE | TD_CTRL_IOS; destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); @@ -1076,11 +1086,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) if (ret) return ret; - frame = urb->start_frame; - for (i = 0; i < urb->number_of_packets; i++, frame += urb->interval) { - if (!urb->iso_frame_desc[i].length) - continue; - + for (i = 0; i < urb->number_of_packets; i++) { td = uhci_alloc_td(uhci); if (!td) return -ENOMEM; @@ -1091,8 +1097,12 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) if (i + 1 >= urb->number_of_packets) td->status |= cpu_to_le32(TD_CTRL_IOC); + } + frame = urb->start_frame; + list_for_each_entry(td, &urbp->td_list, list) { uhci_insert_td_frame_list(uhci, td, frame); + frame += urb->interval; } return -EINPROGRESS; @@ -1105,7 +1115,7 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb) int status; int i, ret = 0; - urb->actual_length = 0; + urb->actual_length = urb->error_count = 0; i = 0; list_for_each_entry(td, &urbp->td_list, list) { @@ -1129,6 +1139,7 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb) i++; } + unlink_isochronous_tds(uhci, urb); return ret; } @@ -1361,6 +1372,8 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) goto done; list_del_init(&urbp->urb_list); + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + unlink_isochronous_tds(uhci, urb); uhci_unlink_generic(uhci, urb); uhci_get_current_frame_number(uhci); -- GitLab From af64a5ebb817532965d18b792d6d74afecfb0bcf Mon Sep 17 00:00:00 2001 From: Henk Date: Wed, 12 Oct 2005 15:02:56 +0200 Subject: [PATCH 0804/1519] [PATCH] USB: Buffer overflow patch for Yealink driver Just a small patch that fixes a small parameter validation bug. drivers/usb/input/map_to_7segment.h: This patch fixes the broken parameter validation in the char to seg7 conversion. This could cause out-of-bounds memory references. MAINTAINERS: Yealink maintainer info now in sorted order. Documentation/input/yealink.txt: Added a Q&A section that answers some common questions. Signed-off-by: Henk Signed-off-by: Greg Kroah-Hartman 006491df1a13f85ad245d1039dfdf20e49c394fd --- Documentation/input/yealink.txt | 19 ++++++++++++++++--- MAINTAINERS | 12 ++++++------ drivers/usb/input/map_to_7segment.h | 2 +- 3 files changed, 23 insertions(+), 10 deletions(-) diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt index 85f095a7ad04..0962c5c948be 100644 --- a/Documentation/input/yealink.txt +++ b/Documentation/input/yealink.txt @@ -2,7 +2,6 @@ Driver documentation for yealink usb-p1k phones 0. Status ~~~~~~~~~ - The p1k is a relatively cheap usb 1.1 phone with: - keyboard full support, yealink.ko / input event API - LCD full support, yealink.ko / sysfs API @@ -17,9 +16,8 @@ For vendor documentation see http://www.yealink.com 1. Compilation (stand alone version) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Currently only kernel 2.6.x.y versions are supported. -In order to build the yealink.ko module do: +In order to build the yealink.ko module do make @@ -28,6 +26,21 @@ the Makefile is pointing to the location where your kernel sources are located, default /usr/src/linux. +1.1 Troubleshooting +~~~~~~~~~~~~~~~~~~~ +Q: Module yealink compiled and installed without any problem but phone + is not initialized and does not react to any actions. +A: If you see something like: + hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone + in dmesg, it means that the hid driver has grabbed the device first. Try to + load module yealink before any other usb hid driver. Please see the + instructions provided by your distribution on module configuration. + +Q: Phone is working now (displays version and accepts keypad input) but I can't + find the sysfs files. +A: The sysfs files are located on the particular usb endpoint. On most + distributions you can do: "find /sys/ -name get_icons" for a hint. + 2. keyboard features ~~~~~~~~~~~~~~~~~~~~ diff --git a/MAINTAINERS b/MAINTAINERS index 3928dc7d6ea9..2868b2879755 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -116,12 +116,6 @@ M: ajk@iehk.rwth-aachen.de L: linux-hams@vger.kernel.org S: Maintained -YEALINK PHONE DRIVER -P: Henk Vergonet -M: Henk.Vergonet@gmail.com -L: usbb2k-api-dev@nongnu.org -S: Maintained - 8139CP 10/100 FAST ETHERNET DRIVER P: Jeff Garzik M: jgarzik@pobox.com @@ -2863,6 +2857,12 @@ M: jpr@f6fbb.org L: linux-hams@vger.kernel.org S: Maintained +YEALINK PHONE DRIVER +P: Henk Vergonet +M: Henk.Vergonet@gmail.com +L: usbb2k-api-dev@nongnu.org +S: Maintained + YMFPCI YAMAHA PCI SOUND (Use ALSA instead) P: Pete Zaitcev M: zaitcev@yahoo.com diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h index 52ff27f15127..a424094d9fe2 100644 --- a/drivers/usb/input/map_to_7segment.h +++ b/drivers/usb/input/map_to_7segment.h @@ -79,7 +79,7 @@ struct seg7_conversion_map { static inline int map_to_seg7(struct seg7_conversion_map *map, int c) { - return c & 0x7f ? map->table[c] : -EINVAL; + return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL; } #define SEG7_CONVERSION_MAP(_name, _map) \ -- GitLab From 1fcb4454cbada6dc495302172ac0412aa7d35fd4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 15 Oct 2005 22:03:30 -0700 Subject: [PATCH 0805/1519] [PATCH] usb doc: fix kernel-doc warning usb/core/buffer.c doesn't export any symbols, so it should use !I instead of !E to eliminate this warning message: Warning(/var/linsrc/linux-2614-rc4//drivers/usb/core/buffer.c): no structured comments found Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/usb.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 705c442c7bf4..15ce0f21e5e0 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -291,7 +291,7 @@ !Edrivers/usb/core/hcd.c !Edrivers/usb/core/hcd-pci.c -!Edrivers/usb/core/buffer.c +!Idrivers/usb/core/buffer.c -- GitLab From cb97c5c9d0789d65d7ec42a80946fa9eb2ec5182 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 16 Oct 2005 15:06:51 -0700 Subject: [PATCH 0806/1519] [PATCH] omap_udc dma off-by-one fix The change to make DMA work two bytes at a time omitted an important tweak that affects the file_storage gadget: it needs to recognize when the host writes an odd number of bytes. (The network layer ignores such extra bytes.) This patch resolves that issue by checking the relevant bit and adjusting the rx byte count, so that for example a legal 13 byte request doesn't morph into an illegal 14 byte one any more. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/omap_udc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index b7885dc0f42f..de8a89ae4bc3 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -691,7 +691,7 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req) } static void -finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status) +finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one) { u16 count; @@ -699,6 +699,8 @@ finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status) ep->dma_counter = (u16) (req->req.dma + req->req.actual); count = dma_dest_len(ep, req->req.dma + req->req.actual); count += req->req.actual; + if (one) + count--; if (count <= req->req.length) req->req.actual = count; @@ -747,7 +749,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src) if (!list_empty(&ep->queue)) { req = container_of(ep->queue.next, struct omap_req, queue); - finish_out_dma(ep, req, 0); + finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB); } UDC_IRQ_SRC_REG = UDC_RXN_EOT; @@ -925,7 +927,7 @@ static void dma_channel_release(struct omap_ep *ep) while (UDC_RXDMA_CFG_REG & mask) udelay(10); if (req) - finish_out_dma(ep, req, -ECONNRESET); + finish_out_dma(ep, req, -ECONNRESET, 0); } omap_free_dma(ep->lch); ep->dma_channel = 0; -- GitLab From f37be9b9be3ebc02d2d075d7f53f7802f3e005db Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 17 Oct 2005 10:42:06 -0400 Subject: [PATCH 0807/1519] [PATCH] Fix hcd->state assignments in uhci-hcd This patch (as581) changes the assignments to hcd->state in the uhci-hcd driver. It fixes part of bugzilla entry #5227. The problem was revealed by David's large suite of USB suspend/resume patches; this patch should go to Linus at the same time those do. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 72cd1576d20c..d33ce3982a5f 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -161,8 +161,8 @@ static void configure_hc(struct uhci_hcd *uhci) /* Set the current frame number */ outw(uhci->frame_number, uhci->io_addr + USBFRNUM); - /* Mark controller as running before we enable interrupts */ - uhci_to_hcd(uhci)->state = HC_STATE_RUNNING; + /* Mark controller as not halted before we enable interrupts */ + uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED; mb(); /* Enable PIRQ */ @@ -263,6 +263,7 @@ __acquires(uhci->lock) static void start_rh(struct uhci_hcd *uhci) { + uhci_to_hcd(uhci)->state = HC_STATE_RUNNING; uhci->is_stopped = 0; smp_wmb(); @@ -708,7 +709,6 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) if (uhci->rh_state > UHCI_RH_SUSPENDED) { dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n"); - hcd->state = HC_STATE_RUNNING; rc = -EBUSY; goto done; }; -- GitLab From 4e67185a7ac3ecb1710e636e2f7e318e99298c7a Mon Sep 17 00:00:00 2001 From: Juha Yrj?l? Date: Sun, 16 Oct 2005 15:47:04 -0700 Subject: [PATCH 0808/1519] [PATCH] add usb transceiver set_suspend() method When a USB device is put into suspend mode, the current drawn from VBUS has to be less than 500 uA. Some transceivers need to be put into a special power-saving mode to accomplish this, and won't have a separate OTG driver handling that. This adds a suspend method to the "otg_transceiver" struct -- misnamed, it's not only for OTG -- and calls it from the OMAP UDC driver. Signed-off-by: Juha Yrj?l? Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/omap_udc.c | 4 ++++ include/linux/usb_otg.h | 13 +++++++++++++ 2 files changed, 17 insertions(+) diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index de8a89ae4bc3..b42799bc747a 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -1788,8 +1788,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src) udc->driver->suspend(&udc->gadget); spin_lock(&udc->lock); } + if (udc->transceiver) + otg_set_suspend(udc->transceiver, 1); } else { VDBG("resume\n"); + if (udc->transceiver) + otg_set_suspend(udc->transceiver, 0); if (udc->gadget.speed == USB_SPEED_FULL && udc->driver->resume) { spin_unlock(&udc->lock); diff --git a/include/linux/usb_otg.h b/include/linux/usb_otg.h index c6683146e9b0..f827f6e203c2 100644 --- a/include/linux/usb_otg.h +++ b/include/linux/usb_otg.h @@ -63,6 +63,10 @@ struct otg_transceiver { int (*set_power)(struct otg_transceiver *otg, unsigned mA); + /* for non-OTG B devices: set transceiver into suspend mode */ + int (*set_suspend)(struct otg_transceiver *otg, + int suspend); + /* for B devices only: start session with A-Host */ int (*start_srp)(struct otg_transceiver *otg); @@ -107,6 +111,15 @@ otg_set_power(struct otg_transceiver *otg, unsigned mA) return otg->set_power(otg, mA); } +static inline int +otg_set_suspend(struct otg_transceiver *otg, int suspend) +{ + if (otg->set_suspend != NULL) + return otg->set_suspend(otg, suspend); + else + return 0; +} + static inline int otg_start_srp(struct otg_transceiver *otg) { -- GitLab From a85ee6b50c8a1fca4034c8d6b21c91a8de171e01 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 10 Oct 2005 01:23:50 +0100 Subject: [PATCH 0809/1519] [PATCH] USB: S3C2410 OHCI - add driver owner field Initialise the .owner field of the driver with the module that owns it, to aid in linking drivers to modules. Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-s3c2410.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 3225d455f459..fab420a2ce71 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -474,6 +474,7 @@ static int ohci_hcd_s3c2410_drv_remove(struct device *dev) static struct device_driver ohci_hcd_s3c2410_driver = { .name = "s3c2410-ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_s3c2410_drv_probe, .remove = ohci_hcd_s3c2410_drv_remove, -- GitLab From d0d5049fb02fc1082c17e08deecd6fed8db549b6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 10 Oct 2005 10:52:33 +0100 Subject: [PATCH 0810/1519] [PATCH] USB: gadget drivers - add .owner initialisation Ensure the the device_driver and usb_gadget_driver have their .owner fields initialised to associate the module owner to the driver. Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 2 ++ drivers/usb/gadget/ether.c | 1 + drivers/usb/gadget/file_storage.c | 1 + drivers/usb/gadget/goku_udc.c | 1 + drivers/usb/gadget/lh7a40x_udc.c | 1 + drivers/usb/gadget/net2280.c | 1 + drivers/usb/gadget/omap_udc.c | 1 + drivers/usb/gadget/pxa2xx_udc.c | 1 + drivers/usb/gadget/zero.c | 1 + 9 files changed, 10 insertions(+) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index c605aaeed636..02106bebd5c1 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -967,6 +967,7 @@ static int dummy_udc_resume (struct device *dev) static struct device_driver dummy_udc_driver = { .name = (char *) gadget_name, + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = dummy_udc_probe, .remove = dummy_udc_remove, @@ -1954,6 +1955,7 @@ static int dummy_hcd_resume (struct device *dev) static struct device_driver dummy_hcd_driver = { .name = (char *) driver_name, + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = dummy_hcd_probe, .remove = dummy_hcd_remove, diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index f1024e804d5c..8f402f85e1ca 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -2533,6 +2533,7 @@ static struct usb_gadget_driver eth_driver = { .driver = { .name = (char *) shortname, + .owner = THIS_MODULE, // .shutdown = ... // .suspend = ... // .resume = ... diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 86a6aeb9ed76..ea09aaa3cab6 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -4044,6 +4044,7 @@ static struct usb_gadget_driver fsg_driver = { .driver = { .name = (char *) shortname, + .owner = THIS_MODULE, // .release = ... // .suspend = ... // .resume = ... diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index b0f3cd63e3b9..654469778ab5 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1970,6 +1970,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static struct pci_driver goku_pci_driver = { .name = (char *) driver_name, .id_table = pci_ids, + .owner = THIS_MODULE, .probe = goku_probe, .remove = goku_remove, diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 012d1e5f1524..9b3673904daf 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -2140,6 +2140,7 @@ static int lh7a40x_udc_remove(struct device *_dev) static struct device_driver udc_driver = { .name = (char *)driver_name, + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = lh7a40x_udc_probe, .remove = lh7a40x_udc_remove diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index c32e1f7476da..0dc6bb00bf72 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2948,6 +2948,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static struct pci_driver net2280_pci_driver = { .name = (char *) driver_name, .id_table = pci_ids, + .owner = THIS_MODULE, .probe = net2280_probe, .remove = net2280_remove, diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index b42799bc747a..41c96b0afbb3 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -2949,6 +2949,7 @@ static int omap_udc_resume(struct device *dev) static struct device_driver udc_driver = { .name = (char *) driver_name, + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = omap_udc_probe, .remove = __exit_p(omap_udc_remove), diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 647028590b23..f83a9262f953 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -2631,6 +2631,7 @@ static int pxa2xx_udc_resume(struct device *dev) static struct device_driver udc_driver = { .name = "pxa2xx-udc", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = pxa2xx_udc_probe, .shutdown = pxa2xx_udc_shutdown, diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index ec9c424f1d97..6c58636e914b 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -1302,6 +1302,7 @@ static struct usb_gadget_driver zero_driver = { .driver = { .name = (char *) shortname, + .owner = THIS_MODULE, // .shutdown = ... // .suspend = ... // .resume = ... -- GitLab From efa400db5332ba341cc354c9d8a5298ff57faa98 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 10 Oct 2005 02:32:15 +0100 Subject: [PATCH 0811/1519] [PATCH] USB: add owner initialisation to host drivers Add .owner initialisation to the device drivers in drivers/usb/host so that when built as module the device_driver refers to the owning module Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 1 + drivers/usb/host/ohci-au1xxx.c | 1 + drivers/usb/host/ohci-lh7a404.c | 1 + drivers/usb/host/ohci-omap.c | 1 + drivers/usb/host/ohci-pci.c | 1 + drivers/usb/host/ohci-ppc-soc.c | 1 + drivers/usb/host/sl811-hcd.c | 1 + drivers/usb/host/uhci-hcd.c | 1 + 8 files changed, 8 insertions(+) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 8bbc8dfe19f3..7872469ccbb1 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -383,6 +383,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static struct pci_driver ehci_pci_driver = { .name = (char *) hcd_name, .id_table = pci_ids, + .owner = THIS_MODULE, .probe = usb_hcd_pci_probe, .remove = usb_hcd_pci_remove, diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index ac463c493035..a277e258eb6c 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -264,6 +264,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct device *dev) static struct device_driver ohci_hcd_au1xxx_driver = { .name = "au1xxx-ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_au1xxx_drv_probe, .remove = ohci_hcd_au1xxx_drv_remove, diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index e2ed55b69f86..238fa4ade615 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -244,6 +244,7 @@ static int ohci_hcd_lh7a404_drv_resume(struct device *dev) static struct device_driver ohci_hcd_lh7a404_driver = { .name = "lh7a404-ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_lh7a404_drv_probe, .remove = ohci_hcd_lh7a404_drv_remove, diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 982cdca22516..45efeed1fcc3 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -492,6 +492,7 @@ static int ohci_omap_resume(struct device *dev) */ static struct device_driver ohci_hcd_omap_driver = { .name = "ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_omap_drv_probe, .remove = ohci_hcd_omap_drv_remove, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index a8dde8b75691..bf1d5ab4aa3a 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -216,6 +216,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static struct pci_driver ohci_pci_driver = { .name = (char *) hcd_name, .id_table = pci_ids, + .owner = THIS_MODULE, .probe = usb_hcd_pci_probe, .remove = usb_hcd_pci_remove, diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 228845eb7eab..4832e57ae579 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -193,6 +193,7 @@ static int ohci_hcd_ppc_soc_drv_remove(struct device *dev) static struct device_driver ohci_hcd_ppc_soc_driver = { .name = "ppc-soc-ohci", + .owner = THIS_MODULE, .bus = &platform_bus_type, .probe = ohci_hcd_ppc_soc_drv_probe, .remove = ohci_hcd_ppc_soc_drv_remove, diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 1e47c1f86e70..40169d9cf2b1 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1831,6 +1831,7 @@ sl811h_resume(struct device *dev) struct device_driver sl811h_driver = { .name = (char *) hcd_name, .bus = &platform_bus_type, + .owner = THIS_MODULE, .probe = sl811h_probe, .remove = __devexit_p(sl811h_remove), diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index d33ce3982a5f..15e0a511069b 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -831,6 +831,7 @@ MODULE_DEVICE_TABLE(pci, uhci_pci_ids); static struct pci_driver uhci_pci_driver = { .name = (char *)hcd_name, .id_table = uhci_pci_ids, + .owner = THIS_MODULE, .probe = usb_hcd_pci_probe, .remove = usb_hcd_pci_remove, -- GitLab From 3e8a556a02d5aa16375d4d74aad0f67cd844c047 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 18 Oct 2005 10:08:31 -0400 Subject: [PATCH 0812/1519] [PATCH] Missing transfer_flags setting in usbtest This patch (as582) adds a missing transfer_flags setting to the usbtest driver. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index d055196533af..90a96257d6ce 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -983,6 +983,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param) reqp->number = i % NUM_SUBCASES; reqp->expected = expected; u->setup_packet = (char *) &reqp->setup; + u->transfer_flags |= URB_NO_SETUP_DMA_MAP; u->context = &context; u->complete = ctrl_complete; -- GitLab From 4592bf5a22593704bb9e8c584a81bf6ca4f6cfec Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0813/1519] [PATCH] USB: remove the global function usbdev_lookup_minor It's only used locally. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 34 +++++++++++++++++----------------- drivers/usb/core/usb.h | 1 - 2 files changed, 17 insertions(+), 18 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6c15dabcfc0b..9222b7a13430 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -517,6 +517,23 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig return ret; } +static struct usb_device *usbdev_lookup_minor(int minor) +{ + struct class_device *class_dev; + struct usb_device *dev = NULL; + + down(&usb_device_class->sem); + list_for_each_entry(class_dev, &usb_device_class->children, node) { + if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { + dev = class_dev->class_data; + break; + } + } + up(&usb_device_class->sem); + + return dev; +}; + /* * file operations */ @@ -1533,23 +1550,6 @@ struct file_operations usbfs_device_file_operations = { .release = usbdev_release, }; -struct usb_device *usbdev_lookup_minor(int minor) -{ - struct class_device *class_dev; - struct usb_device *dev = NULL; - - down(&usb_device_class->sem); - list_for_each_entry(class_dev, &usb_device_class->children, node) { - if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { - dev = class_dev->class_data; - break; - } - } - up(&usb_device_class->sem); - - return dev; -}; - void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 4d59f6e07999..3dc8096c0f92 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -64,7 +64,6 @@ extern int usbdev_init(void); extern void usbdev_cleanup(void); extern void usbdev_add(struct usb_device *dev); extern void usbdev_remove(struct usb_device *dev); -extern struct usb_device *usbdev_lookup_minor(int minor); struct dev_state { struct list_head list; /* state list */ -- GitLab From 3099e75a7ccc3c5b0a4cf988a76d9c4a7fa5e91a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0814/1519] [PATCH] USB: add notifier functions to the USB core for devices and busses This should let us get rid of all of the different hooks in the USB core for when something has changed. Also, some other parts of the kernel have wanted to know this kind of information at times. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/Makefile | 2 +- drivers/usb/core/hcd.c | 2 + drivers/usb/core/hub.c | 3 + drivers/usb/core/notify.c | 120 ++++++++++++++++++++++++++++++++++++++ drivers/usb/core/usb.h | 6 ++ include/linux/usb.h | 8 +++ 6 files changed, 140 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/core/notify.c diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index d5503cf0bf74..dd1c4d2a0c31 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -3,7 +3,7 @@ # usbcore-objs := usb.o hub.o hcd.o urb.o message.o \ - config.o file.o buffer.o sysfs.o devio.o + config.o file.o buffer.o sysfs.o devio.o notify.o ifeq ($(CONFIG_PCI),y) usbcore-objs += hcd-pci.o diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 9ad3912a5ed7..b700b6cdb683 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -792,6 +792,7 @@ static int usb_register_bus(struct usb_bus *bus) list_add (&bus->bus_list, &usb_bus_list); up (&usb_bus_list_lock); + usb_notify_add_bus(bus); usbfs_add_bus (bus); usbmon_notify_bus_add (bus); @@ -820,6 +821,7 @@ static void usb_deregister_bus (struct usb_bus *bus) list_del (&bus->bus_list); up (&usb_bus_list_lock); + usb_notify_remove_bus(bus); usbmon_notify_bus_remove (bus); usbfs_remove_bus (bus); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 273e6ccca213..4f1a8c8cf92b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1128,6 +1128,8 @@ void usb_disconnect(struct usb_device **pdev) */ usb_disable_device(udev, 0); + usb_notify_remove_device(udev); + /* Free the device number, remove the /proc/bus/usb entry and * the sysfs attributes, and delete the parent's children[] * (or root_hub) pointer. @@ -1371,6 +1373,7 @@ int usb_new_device(struct usb_device *udev) } /* USB device state == configured ... usable */ + usb_notify_add_device(udev); /* add a /proc/bus/usb entry */ usbdev_add(udev); diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c new file mode 100644 index 000000000000..37da059eced7 --- /dev/null +++ b/drivers/usb/core/notify.c @@ -0,0 +1,120 @@ +/* + * All the USB notify logic + * + * (C) Copyright 2005 Greg Kroah-Hartman + * + * notifier functions originally based on those in kernel/sys.c + * but fixed up to not be so broken. + * + */ + + +#include +#include +#include +#ifdef CONFIG_USB_DEBUG + #define DEBUG +#else + #undef DEBUG +#endif +#include + +#include "usb.h" + + +static struct notifier_block *usb_notifier_list; +static DECLARE_MUTEX(usb_notifier_lock); + +static void usb_notifier_chain_register(struct notifier_block **list, + struct notifier_block *n) +{ + down(&usb_notifier_lock); + while (*list) { + if (n->priority > (*list)->priority) + break; + list = &((*list)->next); + } + n->next = *list; + *list = n; + up(&usb_notifier_lock); +} + +static void usb_notifier_chain_unregister(struct notifier_block **nl, + struct notifier_block *n) +{ + down(&usb_notifier_lock); + while ((*nl)!=NULL) { + if ((*nl)==n) { + *nl = n->next; + goto exit; + } + nl=&((*nl)->next); + } +exit: + up(&usb_notifier_lock); +} + +static int usb_notifier_call_chain(struct notifier_block **n, + unsigned long val, void *v) +{ + int ret=NOTIFY_DONE; + struct notifier_block *nb = *n; + + down(&usb_notifier_lock); + while (nb) { + ret = nb->notifier_call(nb,val,v); + if (ret&NOTIFY_STOP_MASK) { + goto exit; + } + nb = nb->next; + } +exit: + up(&usb_notifier_lock); + return ret; +} + +/** + * usb_register_notify - register a notifier callback whenever a usb change happens + * @nb: pointer to the notifier block for the callback events. + * + * These changes are either USB devices or busses being added or removed. + */ +void usb_register_notify(struct notifier_block *nb) +{ + usb_notifier_chain_register(&usb_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(usb_register_notify); + +/** + * usb_unregister_notify - unregister a notifier callback + * @nb: pointer to the notifier block for the callback events. + * + * usb_register_notifier() must have been previously called for this function + * to work properly. + */ +void usb_unregister_notify(struct notifier_block *nb) +{ + usb_notifier_chain_unregister(&usb_notifier_list, nb); +} +EXPORT_SYMBOL_GPL(usb_unregister_notify); + + +void usb_notify_add_device(struct usb_device *udev) +{ + usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_ADD, udev); +} + +void usb_notify_remove_device(struct usb_device *udev) +{ + usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_REMOVE, udev); +} + +void usb_notify_add_bus(struct usb_bus *ubus) +{ + usb_notifier_call_chain(&usb_notifier_list, USB_BUS_ADD, ubus); +} + +void usb_notify_remove_bus(struct usb_bus *ubus) +{ + usb_notifier_call_chain(&usb_notifier_list, USB_BUS_REMOVE, ubus); +} diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 3dc8096c0f92..811cf4482e0d 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -80,3 +80,9 @@ struct dev_state { unsigned long ifclaimed; }; +/* internal notify stuff */ +extern void usb_notify_add_device(struct usb_device *udev); +extern void usb_notify_remove_device(struct usb_device *udev); +extern void usb_notify_add_bus(struct usb_bus *ubus); +extern void usb_notify_remove_bus(struct usb_bus *ubus); + diff --git a/include/linux/usb.h b/include/linux/usb.h index 207b1ad9d990..a2d923fd54f9 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1135,6 +1135,14 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out) /* -------------------------------------------------------------------------- */ +/* Events from the usb core */ +#define USB_DEVICE_ADD 0x0001 +#define USB_DEVICE_REMOVE 0x0002 +#define USB_BUS_ADD 0x0003 +#define USB_BUS_REMOVE 0x0004 +extern void usb_register_notify(struct notifier_block *nb); +extern void usb_unregister_notify(struct notifier_block *nb); + #ifdef DEBUG #define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg) #else -- GitLab From a7b986b3e107727dd1c1af0ead0b5e52d7726db3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0815/1519] [PATCH] USB: convert usbfs/devio.c to use usb notifiers Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 41 +++++++++++++++++++++++++++++++++------- drivers/usb/core/hub.c | 2 -- drivers/usb/core/usb.h | 2 -- 3 files changed, 34 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 9222b7a13430..2bd742ba812d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include #include @@ -1550,7 +1551,7 @@ struct file_operations usbfs_device_file_operations = { .release = usbdev_release, }; -void usbdev_add(struct usb_device *dev) +static void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); @@ -1561,11 +1562,29 @@ void usbdev_add(struct usb_device *dev) dev->class_dev->class_data = dev; } -void usbdev_remove(struct usb_device *dev) +static void usbdev_remove(struct usb_device *dev) { class_device_unregister(dev->class_dev); } +static int usbdev_notify(struct notifier_block *self, unsigned long action, + void *dev) +{ + switch (action) { + case USB_DEVICE_ADD: + usbdev_add(dev); + break; + case USB_DEVICE_REMOVE: + usbdev_remove(dev); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block usbdev_nb = { + .notifier_call = usbdev_notify, +}; + static struct cdev usb_device_cdev = { .kobj = {.name = "usb_device", }, .owner = THIS_MODULE, @@ -1585,24 +1604,32 @@ int __init usbdev_init(void) retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX); if (retval) { err("unable to get usb_device major %d", USB_DEVICE_MAJOR); - unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); - goto out; + goto error_cdev; } usb_device_class = class_create(THIS_MODULE, "usb_device"); if (IS_ERR(usb_device_class)) { err("unable to register usb_device class"); retval = PTR_ERR(usb_device_class); - usb_device_class = NULL; - cdev_del(&usb_device_cdev); - unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); + goto error_class; } + usb_register_notify(&usbdev_nb); + out: return retval; + +error_class: + usb_device_class = NULL; + cdev_del(&usb_device_cdev); + +error_cdev: + unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); + goto out; } void usbdev_cleanup(void) { + usb_unregister_notify(&usbdev_nb); class_destroy(usb_device_class); cdev_del(&usb_device_cdev); unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4f1a8c8cf92b..a9d16aff5de5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1137,7 +1137,6 @@ void usb_disconnect(struct usb_device **pdev) dev_dbg (&udev->dev, "unregistering device\n"); release_address(udev); usbfs_remove_device(udev); - usbdev_remove(udev); usb_remove_sysfs_dev_files(udev); /* Avoid races with recursively_mark_NOTATTACHED() */ @@ -1376,7 +1375,6 @@ int usb_new_device(struct usb_device *udev) usb_notify_add_device(udev); /* add a /proc/bus/usb entry */ - usbdev_add(udev); usbfs_add_device(udev); return 0; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 811cf4482e0d..888dbe443695 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -62,8 +62,6 @@ extern void usbfs_conn_disc_event(void); extern int usbdev_init(void); extern void usbdev_cleanup(void); -extern void usbdev_add(struct usb_device *dev); -extern void usbdev_remove(struct usb_device *dev); struct dev_state { struct list_head list; /* state list */ -- GitLab From 54a5c4cd2e4ec0b27c2c3731727f52591456086c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0816/1519] [PATCH] USB: convert usbfs/inode.c to use usb notifiers Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 2 -- drivers/usb/core/hcd.h | 10 --------- drivers/usb/core/hub.c | 3 --- drivers/usb/core/inode.c | 44 ++++++++++++++++++++++++++++------------ 4 files changed, 31 insertions(+), 28 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index b700b6cdb683..16790ad0e2e4 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -793,7 +793,6 @@ static int usb_register_bus(struct usb_bus *bus) up (&usb_bus_list_lock); usb_notify_add_bus(bus); - usbfs_add_bus (bus); usbmon_notify_bus_add (bus); dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum); @@ -823,7 +822,6 @@ static void usb_deregister_bus (struct usb_bus *bus) usb_notify_remove_bus(bus); usbmon_notify_bus_remove (bus); - usbfs_remove_bus (bus); clear_bit (bus->busnum, busmap.busmap); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index d8f0d29a45b7..cc33886260cd 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -400,23 +400,13 @@ static inline int hcd_bus_resume (struct usb_bus *bus) * these are expected to be called from the USB core/hub thread * with the kernel lock held */ -extern void usbfs_add_bus(struct usb_bus *bus); -extern void usbfs_remove_bus(struct usb_bus *bus); -extern void usbfs_add_device(struct usb_device *dev); -extern void usbfs_remove_device(struct usb_device *dev); extern void usbfs_update_special (void); - extern int usbfs_init(void); extern void usbfs_cleanup(void); #else /* CONFIG_USB_DEVICEFS */ -static inline void usbfs_add_bus(struct usb_bus *bus) {} -static inline void usbfs_remove_bus(struct usb_bus *bus) {} -static inline void usbfs_add_device(struct usb_device *dev) {} -static inline void usbfs_remove_device(struct usb_device *dev) {} static inline void usbfs_update_special (void) {} - static inline int usbfs_init(void) { return 0; } static inline void usbfs_cleanup(void) { } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a9d16aff5de5..6a2ebd89916f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1136,7 +1136,6 @@ void usb_disconnect(struct usb_device **pdev) */ dev_dbg (&udev->dev, "unregistering device\n"); release_address(udev); - usbfs_remove_device(udev); usb_remove_sysfs_dev_files(udev); /* Avoid races with recursively_mark_NOTATTACHED() */ @@ -1374,8 +1373,6 @@ int usb_new_device(struct usb_device *udev) /* USB device state == configured ... usable */ usb_notify_add_device(udev); - /* add a /proc/bus/usb entry */ - usbfs_add_device(udev); return 0; fail: diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index d07bba01995b..12f490fdee8f 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "usb.h" #include "hcd.h" @@ -619,7 +620,7 @@ void usbfs_update_special (void) } } -void usbfs_add_bus(struct usb_bus *bus) +static void usbfs_add_bus(struct usb_bus *bus) { struct dentry *parent; char name[8]; @@ -642,12 +643,9 @@ void usbfs_add_bus(struct usb_bus *bus) err ("error creating usbfs bus entry"); return; } - - usbfs_update_special(); - usbfs_conn_disc_event(); } -void usbfs_remove_bus(struct usb_bus *bus) +static void usbfs_remove_bus(struct usb_bus *bus) { if (bus->usbfs_dentry) { fs_remove_file (bus->usbfs_dentry); @@ -659,12 +657,9 @@ void usbfs_remove_bus(struct usb_bus *bus) remove_special_files(); num_buses = 0; } - - usbfs_update_special(); - usbfs_conn_disc_event(); } -void usbfs_add_device(struct usb_device *dev) +static void usbfs_add_device(struct usb_device *dev) { char name[8]; int i; @@ -690,12 +685,9 @@ void usbfs_add_device(struct usb_device *dev) } if (dev->usbfs_dentry->d_inode) dev->usbfs_dentry->d_inode->i_size = i_size; - - usbfs_update_special(); - usbfs_conn_disc_event(); } -void usbfs_remove_device(struct usb_device *dev) +static void usbfs_remove_device(struct usb_device *dev) { struct dev_state *ds; struct siginfo sinfo; @@ -716,10 +708,33 @@ void usbfs_remove_device(struct usb_device *dev) kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid); } } +} + +static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev) +{ + switch (action) { + case USB_DEVICE_ADD: + usbfs_add_device(dev); + break; + case USB_DEVICE_REMOVE: + usbfs_remove_device(dev); + break; + case USB_BUS_ADD: + usbfs_add_bus(dev); + break; + case USB_BUS_REMOVE: + usbfs_remove_bus(dev); + } + usbfs_update_special(); usbfs_conn_disc_event(); + return NOTIFY_OK; } +static struct notifier_block usbfs_nb = { + .notifier_call = usbfs_notify, +}; + /* --------------------------------------------------------------------- */ static struct proc_dir_entry *usbdir = NULL; @@ -732,6 +747,8 @@ int __init usbfs_init(void) if (retval) return retval; + usb_register_notify(&usbfs_nb); + /* create mount point for usbfs */ usbdir = proc_mkdir("usb", proc_bus); @@ -740,6 +757,7 @@ int __init usbfs_init(void) void usbfs_cleanup(void) { + usb_unregister_notify(&usbfs_nb); unregister_filesystem(&usb_fs_type); if (usbdir) remove_proc_entry("usb", proc_bus); -- GitLab From 72adaa962741e8e910300b66bb123b1a9c31a8a8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0817/1519] [PATCH] USB: convert usbmon to use usb notifiers This also removes 2 usbmon callbacks. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 2 -- drivers/usb/core/hcd.h | 16 ---------------- drivers/usb/mon/mon_main.c | 23 +++++++++++++++++++++-- 3 files changed, 21 insertions(+), 20 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 16790ad0e2e4..e8f2b8d8f14d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -793,7 +793,6 @@ static int usb_register_bus(struct usb_bus *bus) up (&usb_bus_list_lock); usb_notify_add_bus(bus); - usbmon_notify_bus_add (bus); dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum); return 0; @@ -821,7 +820,6 @@ static void usb_deregister_bus (struct usb_bus *bus) up (&usb_bus_list_lock); usb_notify_remove_bus(bus); - usbmon_notify_bus_remove (bus); clear_bit (bus->busnum, busmap.busmap); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index cc33886260cd..a5d92943ff95 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -421,8 +421,6 @@ struct usb_mon_operations { void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); void (*urb_complete)(struct usb_bus *bus, struct urb *urb); /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ - void (*bus_add)(struct usb_bus *bus); - void (*bus_remove)(struct usb_bus *bus); }; extern struct usb_mon_operations *mon_ops; @@ -445,18 +443,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) if (bus->monitored) (*mon_ops->urb_complete)(bus, urb); } - -static inline void usbmon_notify_bus_add(struct usb_bus *bus) -{ - if (mon_ops) - (*mon_ops->bus_add)(bus); -} - -static inline void usbmon_notify_bus_remove(struct usb_bus *bus) -{ - if (mon_ops) - (*mon_ops->bus_remove)(bus); -} int usb_mon_register(struct usb_mon_operations *ops); void usb_mon_deregister(void); @@ -467,8 +453,6 @@ static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {} static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, int error) {} static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {} -static inline void usbmon_notify_bus_add(struct usb_bus *bus) {} -static inline void usbmon_notify_bus_remove(struct usb_bus *bus) {} #endif /* CONFIG_USB_MON */ diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 508a21028db4..c34944c75047 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "usb_mon.h" #include "../core/hcd.h" @@ -205,6 +206,23 @@ static void mon_bus_remove(struct usb_bus *ubus) up(&mon_lock); } +static int mon_notify(struct notifier_block *self, unsigned long action, + void *dev) +{ + switch (action) { + case USB_BUS_ADD: + mon_bus_add(dev); + break; + case USB_BUS_REMOVE: + mon_bus_remove(dev); + } + return NOTIFY_OK; +} + +static struct notifier_block mon_nb = { + .notifier_call = mon_notify, +}; + /* * Ops */ @@ -212,8 +230,6 @@ static struct usb_mon_operations mon_ops_0 = { .urb_submit = mon_submit, .urb_submit_error = mon_submit_error, .urb_complete = mon_complete, - .bus_add = mon_bus_add, - .bus_remove = mon_bus_remove, }; /* @@ -329,6 +345,8 @@ static int __init mon_init(void) } // MOD_INC_USE_COUNT(which_module?); + usb_register_notify(&mon_nb); + down(&usb_bus_list_lock); list_for_each_entry (ubus, &usb_bus_list, bus_list) { mon_bus_init(mondir, ubus); @@ -342,6 +360,7 @@ static void __exit mon_exit(void) struct mon_bus *mbus; struct list_head *p; + usb_unregister_notify(&mon_nb); usb_mon_deregister(); down(&mon_lock); -- GitLab From c36fc889b5a4fd66cfd9ba80d9e038745d349567 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 17 Oct 2005 18:15:54 -0700 Subject: [PATCH 0818/1519] [PATCH] usb: Patch for USBDEVFS_IOCTL from 32-bit programs Dell supplied me with the following test: #include #include #include #include #include main(int argc,char*argv[]) { struct usbdevfs_hub_portinfo hubPortInfo = {0}; struct usbdevfs_ioctl command = {0}; command.ifno = 0; command.ioctl_code = USBDEVFS_HUB_PORTINFO; command.data = (void*)&hubPortInfo; int fd, ret; if(argc != 2) { fprintf(stderr,"Usage: %s /proc/bus/usb//\n",argv[0]); fprintf(stderr,"Example: %s /proc/bus/usb/001/001\n",argv[0]); exit(1); } errno = 0; fd = open(argv[1],O_RDWR); if(fd < 0) { perror("open failed:"); exit(errno); } errno = 0; ret = ioctl(fd,USBDEVFS_IOCTL,&command); printf("IOCTL return status:%d\n",ret); if(ret<0) { perror("IOCTL failed:"); close(fd); exit(3); } else { printf("IOCTL passed:Num of ports %d\n",hubPortInfo.nports); close(fd); exit(0); } return 0; } I have verified that it breaks if built in 32 bit mode on x86_64 and that the patch below fixes it. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 56 +++++++++++++++++++++++++++--------- fs/compat_ioctl.c | 1 + include/linux/usbdevice_fs.h | 7 +++++ 3 files changed, 50 insertions(+), 14 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 2bd742ba812d..ffb2e242b100 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1301,23 +1301,20 @@ static int proc_releaseinterface(struct dev_state *ps, void __user *arg) return 0; } -static int proc_ioctl (struct dev_state *ps, void __user *arg) +static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) { - struct usbdevfs_ioctl ctrl; int size; void *buf = NULL; int retval = 0; struct usb_interface *intf = NULL; struct usb_driver *driver = NULL; - /* get input parameters and alloc buffer */ - if (copy_from_user(&ctrl, arg, sizeof (ctrl))) - return -EFAULT; - if ((size = _IOC_SIZE (ctrl.ioctl_code)) > 0) { + /* alloc buffer */ + if ((size = _IOC_SIZE (ctl->ioctl_code)) > 0) { if ((buf = kmalloc (size, GFP_KERNEL)) == NULL) return -ENOMEM; - if ((_IOC_DIR(ctrl.ioctl_code) & _IOC_WRITE)) { - if (copy_from_user (buf, ctrl.data, size)) { + if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) { + if (copy_from_user (buf, ctl->data, size)) { kfree(buf); return -EFAULT; } @@ -1333,9 +1330,9 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg) if (ps->dev->state != USB_STATE_CONFIGURED) retval = -EHOSTUNREACH; - else if (!(intf = usb_ifnum_to_if (ps->dev, ctrl.ifno))) + else if (!(intf = usb_ifnum_to_if (ps->dev, ctl->ifno))) retval = -EINVAL; - else switch (ctrl.ioctl_code) { + else switch (ctl->ioctl_code) { /* disconnect kernel driver from interface */ case USBDEVFS_DISCONNECT: @@ -1367,7 +1364,7 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg) if (driver == NULL || driver->ioctl == NULL) { retval = -ENOTTY; } else { - retval = driver->ioctl (intf, ctrl.ioctl_code, buf); + retval = driver->ioctl (intf, ctl->ioctl_code, buf); if (retval == -ENOIOCTLCMD) retval = -ENOTTY; } @@ -1376,15 +1373,42 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg) /* cleanup and return */ if (retval >= 0 - && (_IOC_DIR (ctrl.ioctl_code) & _IOC_READ) != 0 + && (_IOC_DIR (ctl->ioctl_code) & _IOC_READ) != 0 && size > 0 - && copy_to_user (ctrl.data, buf, size) != 0) + && copy_to_user (ctl->data, buf, size) != 0) retval = -EFAULT; kfree(buf); return retval; } +static int proc_ioctl_default(struct dev_state *ps, void __user *arg) +{ + struct usbdevfs_ioctl ctrl; + + if (copy_from_user(&ctrl, arg, sizeof (ctrl))) + return -EFAULT; + return proc_ioctl(ps, &ctrl); +} + +#ifdef CONFIG_COMPAT +static int proc_ioctl_compat(struct dev_state *ps, void __user *arg) +{ + struct usbdevfs_ioctl32 __user *uioc; + struct usbdevfs_ioctl ctrl; + u32 udata; + + uioc = compat_ptr(arg); + if (get_user(ctrl.ifno, &uioc->ifno) || + get_user(ctrl.ioctl_code, &uioc->ioctl_code) || + __get_user(udata, &uioc->data)) + return -EFAULT; + ctrl.data = compat_ptr(udata); + + return proc_ioctl(ps, &ctrl); +} +#endif + /* * NOTE: All requests here that have interface numbers as parameters * are assuming that somehow the configuration has been prevented from @@ -1485,6 +1509,10 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd ret = proc_reapurbnonblock_compat(ps, p); break; + case USBDEVFS_IOCTL32: + snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); + ret = proc_ioctl_compat(ps, p); + break; #endif case USBDEVFS_DISCARDURB: @@ -1519,7 +1547,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd case USBDEVFS_IOCTL: snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); - ret = proc_ioctl(ps, p); + ret = proc_ioctl_default(ps, p); break; } usb_unlock_device(dev); diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index e28a74203f3b..a327e03753ac 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -3050,6 +3050,7 @@ HANDLE_IOCTL(TIOCSSERIAL, serial_struct_ioctl) HANDLE_IOCTL(USBDEVFS_CONTROL32, do_usbdevfs_control) HANDLE_IOCTL(USBDEVFS_BULK32, do_usbdevfs_bulk) HANDLE_IOCTL(USBDEVFS_DISCSIGNAL32, do_usbdevfs_discsignal) +COMPATIBLE_IOCTL(USBDEVFS_IOCTL32) /* i2c */ HANDLE_IOCTL(I2C_FUNCS, w_long) HANDLE_IOCTL(I2C_RDWR, do_i2c_rdwr_ioctl) diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 9facf733800c..8859f0b41543 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -140,6 +140,12 @@ struct usbdevfs_urb32 { compat_caddr_t usercontext; /* unused */ struct usbdevfs_iso_packet_desc iso_frame_desc[0]; }; + +struct usbdevfs_ioctl32 { + s32 ifno; + s32 ioctl_code; + compat_caddr_t data; +}; #endif #define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer) @@ -160,6 +166,7 @@ struct usbdevfs_urb32 { #define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int) #define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo) #define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl) +#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32) #define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo) #define USBDEVFS_RESET _IO('U', 20) #define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int) -- GitLab From a6c82600d4058346ea6fd801bc21d7abcc1350d8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0819/1519] [PATCH] USB: delete the bluetty driver We have a real Bluetooth system in Linux, lets finally delete this driver as no one is using it (and if they are, they are using a closed source bluetooth stack, which I can't support anyway.) Marcel, you owe me a beer :) Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 8 - drivers/usb/Makefile | 1 - drivers/usb/class/Kconfig | 23 - drivers/usb/class/Makefile | 1 - drivers/usb/class/bluetty.c | 1279 ----------------------------------- 5 files changed, 1312 deletions(-) delete mode 100644 drivers/usb/class/bluetty.c diff --git a/MAINTAINERS b/MAINTAINERS index 2868b2879755..770155a01523 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2489,14 +2489,6 @@ L: linux-kernel@vger.kernel.org L: linux-usb-devel@lists.sourceforge.net S: Supported -USB BLUETOOTH TTY CONVERTER DRIVER -P: Greg Kroah-Hartman -M: greg@kroah.com -L: linux-usb-users@lists.sourceforge.net -L: linux-usb-devel@lists.sourceforge.net -S: Maintained -W: http://www.kroah.com/linux-usb/ - USB CDC ETHERNET DRIVER P: Greg Kroah-Hartman M: greg@kroah.com diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index aa554f9805ee..a50c2bc506f2 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_ETRAX_USB_HOST) += host/ obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_AUDIO) += class/ -obj-$(CONFIG_USB_BLUETOOTH_TTY) += class/ obj-$(CONFIG_USB_MIDI) += class/ obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 333e39bb105f..ef105a92a7bd 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -28,29 +28,6 @@ config USB_AUDIO To compile this driver as a module, choose M here: the module will be called audio. -comment "USB Bluetooth TTY can only be used with disabled Bluetooth subsystem" - depends on USB && BT - -config USB_BLUETOOTH_TTY - tristate "USB Bluetooth TTY support" - depends on USB && BT=n - ---help--- - This driver implements a nonstandard tty interface to a Bluetooth - device that can be used only by specialized Bluetooth HCI software. - - Say Y here if you want to use OpenBT Bluetooth stack (available - at ), or other TTY based - Bluetooth stacks, and want to connect a USB Bluetooth device - to your computer's USB port. - - Do *not* enable this driver if you want to use generic Linux - Bluetooth support. - - If in doubt, say N here. - - To compile this driver as a module, choose M here: the - module will be called bluetty. - config USB_MIDI tristate "USB MIDI support" depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile index 971e5497a3fd..229471247751 100644 --- a/drivers/usb/class/Makefile +++ b/drivers/usb/class/Makefile @@ -5,6 +5,5 @@ obj-$(CONFIG_USB_ACM) += cdc-acm.o obj-$(CONFIG_USB_AUDIO) += audio.o -obj-$(CONFIG_USB_BLUETOOTH_TTY) += bluetty.o obj-$(CONFIG_USB_MIDI) += usb-midi.o obj-$(CONFIG_USB_PRINTER) += usblp.o diff --git a/drivers/usb/class/bluetty.c b/drivers/usb/class/bluetty.c deleted file mode 100644 index 524023327c49..000000000000 --- a/drivers/usb/class/bluetty.c +++ /dev/null @@ -1,1279 +0,0 @@ -/* - * bluetty.c Version 0.13 - * - * Copyright (C) 2000, 2001 Greg Kroah-Hartman - * Copyright (C) 2000 Mark Douglas Corner - * - * USB Bluetooth TTY driver, based on the Bluetooth Spec version 1.0B - * - * (2001/11/30) Version 0.13 gkh - * - added locking patch from Masoodur Rahman - * - removed active variable, as open_count will do. - * - * (2001/07/09) Version 0.12 gkh - * - removed in_interrupt() call, as it doesn't make sense to do - * that anymore. - * - * (2001/06/05) Version 0.11 gkh - * - Fixed problem with read urb status saying that we have shutdown, - * and that we shouldn't resubmit the urb. Patch from unknown. - * - * (2001/05/28) Version 0.10 gkh - * - Fixed problem with using data from userspace in the bluetooth_write - * function as found by the CHECKER project. - * - Added a buffer to the write_urb_pool which reduces the number of - * buffers being created and destroyed for ever write. Also cleans - * up the logic a bit. - * - Added a buffer to the control_urb_pool which fixes a memory leak - * when the device is removed from the system. - * - * (2001/05/28) Version 0.9 gkh - * Fixed problem with bluetooth==NULL for bluetooth_read_bulk_callback - * which was found by both the CHECKER project and Mikko Rahkonen. - * - * (08/04/2001) gb - * Identify version on module load. - * - * (2001/03/10) Version 0.8 gkh - * Fixed problem with not unlinking interrupt urb on device close - * and resubmitting the read urb on error with bluetooth struct. - * Thanks to Narayan Mohanram for the - * fixes. - * - * (11/29/2000) Version 0.7 gkh - * Fixed problem with overrunning the tty flip buffer. - * Removed unneeded NULL pointer initialization. - * - * (10/05/2000) Version 0.6 gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * Got a real major id number and name. - * - * (08/06/2000) Version 0.5 gkh - * Fixed problem of not resubmitting the bulk read urb if there is - * an error in the callback. Ericsson devices seem to need this. - * - * (07/11/2000) Version 0.4 gkh - * Fixed bug in disconnect for when we call tty_hangup - * Fixed bug in bluetooth_ctrl_msg where the bluetooth struct was not - * getting attached to the control urb properly. - * Fixed bug in bluetooth_write where we pay attention to the result - * of bluetooth_ctrl_msg. - * - * (08/03/2000) Version 0.3 gkh mdc - * Merged in Mark's changes to make the driver play nice with the Axis - * stack. - * Made the write bulk use an urb pool to enable larger transfers with - * fewer calls to the driver. - * Fixed off by one bug in acl pkt receive - * Made packet counters specific to each bluetooth device - * Added checks for zero length callbacks - * Added buffers for int and bulk packets. Had to do this otherwise - * packet types could intermingle. - * Made a control urb pool for the control messages. - * - * (07/11/2000) Version 0.2 gkh - * Fixed a small bug found by Nils Faerber in the usb_bluetooth_probe - * function. - * - * (07/09/2000) Version 0.1 gkh - * Initial release. Has support for sending ACL data (which is really just - * a HCI frame.) Raw HCI commands and HCI events are not supported. - * A ioctl will probably be needed for the HCI commands and events in the - * future. All isoch endpoints are ignored at this time also. - * This driver should work for all currently shipping USB Bluetooth - * devices at this time :) - * - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEBUG -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.13" -#define DRIVER_AUTHOR "Greg Kroah-Hartman, Mark Douglas Corner" -#define DRIVER_DESC "USB Bluetooth tty driver" - -/* define this if you have hardware that is not good */ -/*#define BTBUGGYHARDWARE */ - -/* Class, SubClass, and Protocol codes that describe a Bluetooth device */ -#define WIRELESS_CLASS_CODE 0xe0 -#define RF_SUBCLASS_CODE 0x01 -#define BLUETOOTH_PROGRAMMING_PROTOCOL_CODE 0x01 - - -#define BLUETOOTH_TTY_MAJOR 216 /* real device node major id */ -#define BLUETOOTH_TTY_MINORS 256 /* whole lotta bluetooth devices */ - -#define USB_BLUETOOTH_MAGIC 0x6d02 /* magic number for bluetooth struct */ - -#define BLUETOOTH_CONTROL_REQUEST_TYPE 0x20 - -/* Bluetooth packet types */ -#define CMD_PKT 0x01 -#define ACL_PKT 0x02 -#define SCO_PKT 0x03 -#define EVENT_PKT 0x04 -#define ERROR_PKT 0x05 -#define NEG_PKT 0x06 - -/* Message sizes */ -#define MAX_EVENT_SIZE 0xFF -#define EVENT_HDR_SIZE 3 /* 2 for the header + 1 for the type indicator */ -#define EVENT_BUFFER_SIZE (MAX_EVENT_SIZE + EVENT_HDR_SIZE) - -#define MAX_ACL_SIZE 0xFFFF -#define ACL_HDR_SIZE 5 /* 4 for the header + 1 for the type indicator */ -#define ACL_BUFFER_SIZE (MAX_ACL_SIZE + ACL_HDR_SIZE) - -/* parity check flag */ -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - -#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) - -#define NUM_BULK_URBS 24 -#define NUM_CONTROL_URBS 16 - -struct usb_bluetooth { - int magic; - struct usb_device * dev; - struct tty_driver * tty_driver; /* the tty_driver for this device */ - struct tty_struct * tty; /* the corresponding tty for this port */ - - unsigned char minor; /* the starting minor number for this device */ - int throttle; /* throttled by tty layer */ - int open_count; - - __u8 control_out_bInterfaceNum; - struct urb * control_urb_pool[NUM_CONTROL_URBS]; - struct usb_ctrlrequest dr[NUM_CONTROL_URBS]; - - unsigned char * interrupt_in_buffer; - struct urb * interrupt_in_urb; - __u8 interrupt_in_endpointAddress; - __u8 interrupt_in_interval; - int interrupt_in_buffer_size; - - unsigned char * bulk_in_buffer; - struct urb * read_urb; - __u8 bulk_in_endpointAddress; - int bulk_in_buffer_size; - - int bulk_out_buffer_size; - __u8 bulk_out_endpointAddress; - - wait_queue_head_t write_wait; - - struct work_struct work; /* work queue entry for line discipline waking up */ - - unsigned int int_packet_pos; - unsigned char int_buffer[EVENT_BUFFER_SIZE]; - unsigned int bulk_packet_pos; - unsigned char bulk_buffer[ACL_BUFFER_SIZE]; /* 64k preallocated, fix? */ - struct semaphore lock; -}; - - -/* local function prototypes */ -static int bluetooth_open (struct tty_struct *tty, struct file *filp); -static void bluetooth_close (struct tty_struct *tty, struct file *filp); -static int bluetooth_write (struct tty_struct *tty, const unsigned char *buf, int count); -static int bluetooth_write_room (struct tty_struct *tty); -static int bluetooth_chars_in_buffer (struct tty_struct *tty); -static void bluetooth_throttle (struct tty_struct *tty); -static void bluetooth_unthrottle (struct tty_struct *tty); -static int bluetooth_ioctl (struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); -static void bluetooth_set_termios (struct tty_struct *tty, struct termios *old); - -static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs); -static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs); -static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs); - -static int usb_bluetooth_probe (struct usb_interface *intf, - const struct usb_device_id *id); -static void usb_bluetooth_disconnect (struct usb_interface *intf); - - -static struct usb_device_id usb_bluetooth_ids [] = { - { USB_DEVICE_INFO(WIRELESS_CLASS_CODE, RF_SUBCLASS_CODE, BLUETOOTH_PROGRAMMING_PROTOCOL_CODE) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, usb_bluetooth_ids); - -static struct usb_driver usb_bluetooth_driver = { - .owner = THIS_MODULE, - .name = "bluetty", - .probe = usb_bluetooth_probe, - .disconnect = usb_bluetooth_disconnect, - .id_table = usb_bluetooth_ids, -}; - -static struct tty_driver *bluetooth_tty_driver; -static struct usb_bluetooth *bluetooth_table[BLUETOOTH_TTY_MINORS]; - - -static inline int bluetooth_paranoia_check (struct usb_bluetooth *bluetooth, const char *function) -{ - if (!bluetooth) { - dbg("%s - bluetooth == NULL", function); - return -1; - } - if (bluetooth->magic != USB_BLUETOOTH_MAGIC) { - dbg("%s - bad magic number for bluetooth", function); - return -1; - } - - return 0; -} - - -static inline struct usb_bluetooth* get_usb_bluetooth (struct usb_bluetooth *bluetooth, const char *function) -{ - if (!bluetooth || - bluetooth_paranoia_check (bluetooth, function)) { - /* then say that we don't have a valid usb_bluetooth thing, which will - * end up generating -ENODEV return values */ - return NULL; - } - - return bluetooth; -} - - -static inline struct usb_bluetooth *get_bluetooth_by_index (int index) -{ - return bluetooth_table[index]; -} - - -static int bluetooth_ctrl_msg (struct usb_bluetooth *bluetooth, int request, int value, const unsigned char *buf, int len) -{ - struct urb *urb = NULL; - struct usb_ctrlrequest *dr = NULL; - int i; - int status; - - dbg ("%s", __FUNCTION__); - - /* try to find a free urb in our list */ - for (i = 0; i < NUM_CONTROL_URBS; ++i) { - if (bluetooth->control_urb_pool[i]->status != -EINPROGRESS) { - urb = bluetooth->control_urb_pool[i]; - dr = &bluetooth->dr[i]; - break; - } - } - if (urb == NULL) { - dbg ("%s - no free urbs", __FUNCTION__); - return -ENOMEM; - } - - /* keep increasing the urb transfer buffer to fit the size of the message */ - if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = kmalloc (len, GFP_KERNEL); - if (urb->transfer_buffer == NULL) { - err ("%s - out of memory", __FUNCTION__); - return -ENOMEM; - } - } - if (urb->transfer_buffer_length < len) { - kfree(urb->transfer_buffer); - urb->transfer_buffer = kmalloc (len, GFP_KERNEL); - if (urb->transfer_buffer == NULL) { - err ("%s - out of memory", __FUNCTION__); - return -ENOMEM; - } - } - memcpy (urb->transfer_buffer, buf, len); - - dr->bRequestType= BLUETOOTH_CONTROL_REQUEST_TYPE; - dr->bRequest = request; - dr->wValue = cpu_to_le16((u16) value); - dr->wIndex = cpu_to_le16((u16) bluetooth->control_out_bInterfaceNum); - dr->wLength = cpu_to_le16((u16) len); - - usb_fill_control_urb (urb, bluetooth->dev, usb_sndctrlpipe(bluetooth->dev, 0), - (unsigned char*)dr, urb->transfer_buffer, len, bluetooth_ctrl_callback, bluetooth); - - /* send it down the pipe */ - status = usb_submit_urb(urb, GFP_KERNEL); - if (status) - dbg("%s - usb_submit_urb(control) failed with status = %d", __FUNCTION__, status); - - return status; -} - - - - - -/***************************************************************************** - * Driver tty interface functions - *****************************************************************************/ -static int bluetooth_open (struct tty_struct *tty, struct file * filp) -{ - struct usb_bluetooth *bluetooth; - int result; - - dbg("%s", __FUNCTION__); - - /* initialize the pointer incase something fails */ - tty->driver_data = NULL; - - /* get the bluetooth object associated with this tty pointer */ - bluetooth = get_bluetooth_by_index (tty->index); - - if (bluetooth_paranoia_check (bluetooth, __FUNCTION__)) { - return -ENODEV; - } - - down (&bluetooth->lock); - - ++bluetooth->open_count; - if (bluetooth->open_count == 1) { - /* set up our structure making the tty driver remember our object, and us it */ - tty->driver_data = bluetooth; - bluetooth->tty = tty; - - /* force low_latency on so that our tty_push actually forces the data through, - * otherwise it is scheduled, and with high data rates (like with OHCI) data - * can get lost. */ - bluetooth->tty->low_latency = 1; - - /* Reset the packet position counters */ - bluetooth->int_packet_pos = 0; - bluetooth->bulk_packet_pos = 0; - -#ifndef BTBUGGYHARDWARE - /* Start reading from the device */ - usb_fill_bulk_urb (bluetooth->read_urb, bluetooth->dev, - usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress), - bluetooth->bulk_in_buffer, - bluetooth->bulk_in_buffer_size, - bluetooth_read_bulk_callback, bluetooth); - result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL); - if (result) - dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result); -#endif - usb_fill_int_urb (bluetooth->interrupt_in_urb, bluetooth->dev, - usb_rcvintpipe(bluetooth->dev, bluetooth->interrupt_in_endpointAddress), - bluetooth->interrupt_in_buffer, - bluetooth->interrupt_in_buffer_size, - bluetooth_int_callback, bluetooth, - bluetooth->interrupt_in_interval); - result = usb_submit_urb(bluetooth->interrupt_in_urb, GFP_KERNEL); - if (result) - dbg("%s - usb_submit_urb(interrupt in) failed with status %d", __FUNCTION__, result); - } - - up(&bluetooth->lock); - - return 0; -} - - -static void bluetooth_close (struct tty_struct *tty, struct file * filp) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not opened", __FUNCTION__); - return; - } - - down (&bluetooth->lock); - - --bluetooth->open_count; - if (bluetooth->open_count <= 0) { - bluetooth->open_count = 0; - - /* shutdown any in-flight urbs that we know about */ - usb_kill_urb (bluetooth->read_urb); - usb_kill_urb (bluetooth->interrupt_in_urb); - } - up(&bluetooth->lock); -} - - -static int bluetooth_write (struct tty_struct * tty, const unsigned char *buf, int count) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - struct urb *urb = NULL; - unsigned char *temp_buffer = NULL; - const unsigned char *current_buffer; - unsigned char *urb_buffer; - int i; - int retval = 0; - - if (!bluetooth) { - return -ENODEV; - } - - dbg("%s - %d byte(s)", __FUNCTION__, count); - - if (!bluetooth->open_count) { - dbg ("%s - device not opened", __FUNCTION__); - return -EINVAL; - } - - if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); - return 0; - } - if (count == 1) { - dbg("%s - write request only included type %d", __FUNCTION__, buf[0]); - return 1; - } - -#ifdef DEBUG - printk (KERN_DEBUG __FILE__ ": %s - length = %d, data = ", __FUNCTION__, count); - for (i = 0; i < count; ++i) { - printk ("%.2x ", buf[i]); - } - printk ("\n"); -#endif - - current_buffer = buf; - - switch (*current_buffer) { - /* First byte indicates the type of packet */ - case CMD_PKT: - /* dbg("%s- Send cmd_pkt len:%d", __FUNCTION__, count);*/ - - retval = bluetooth_ctrl_msg (bluetooth, 0x00, 0x00, ¤t_buffer[1], count-1); - if (retval) { - goto exit; - } - retval = count; - break; - - case ACL_PKT: - ++current_buffer; - --count; - - urb_buffer = kmalloc (count, GFP_ATOMIC); - if (!urb_buffer) { - dev_err(&bluetooth->dev->dev, "out of memory\n"); - retval = -ENOMEM; - goto exit; - } - - urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - dev_err(&bluetooth->dev->dev, "no more free urbs\n"); - kfree(urb_buffer); - retval = -ENOMEM; - goto exit; - } - memcpy (urb_buffer, current_buffer, count); - - /* build up our urb */ - usb_fill_bulk_urb(urb, bluetooth->dev, - usb_sndbulkpipe(bluetooth->dev, - bluetooth->bulk_out_endpointAddress), - urb_buffer, - count, - bluetooth_write_bulk_callback, - bluetooth); - - - /* send it down the pipe */ - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { - dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, retval); - goto exit; - } - - /* we are done with this urb, so let the host driver - * really free it when it is finished with it */ - usb_free_urb (urb); - retval = count + 1; - break; - - default : - dbg("%s - unsupported (at this time) write type", __FUNCTION__); - retval = -EINVAL; - break; - } - -exit: - kfree(temp_buffer); - - return retval; -} - - -static int bluetooth_write_room (struct tty_struct *tty) -{ - dbg("%s", __FUNCTION__); - - /* - * We really can take anything the user throws at us - * but let's pick a nice big number to tell the tty - * layer that we have lots of free space - */ - return 2048; -} - - -static int bluetooth_chars_in_buffer (struct tty_struct *tty) -{ - dbg("%s", __FUNCTION__); - - /* - * We can't really account for how much data we - * have sent out, but hasn't made it through to the - * device, so just tell the tty layer that everything - * is flushed. - */ - return 0; -} - - -static void bluetooth_throttle (struct tty_struct * tty) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - dbg("%s unsupported (at this time)", __FUNCTION__); - - return; -} - - -static void bluetooth_unthrottle (struct tty_struct * tty) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - dbg("%s unsupported (at this time)", __FUNCTION__); -} - - -static int bluetooth_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return -ENODEV; - } - - dbg("%s - cmd 0x%.4x", __FUNCTION__, cmd); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return -ENODEV; - } - - /* FIXME!!! */ - return -ENOIOCTLCMD; -} - - -static void bluetooth_set_termios (struct tty_struct *tty, struct termios * old) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - /* FIXME!!! */ - - return; -} - - -#ifdef BTBUGGYHARDWARE -void btusb_enable_bulk_read(struct tty_struct *tty){ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - int result; - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - if (bluetooth->read_urb) { - usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev, - usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress), - bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size, - bluetooth_read_bulk_callback, bluetooth); - result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL); - if (result) - err ("%s - failed submitting read urb, error %d", __FUNCTION__, result); - } -} - -void btusb_disable_bulk_read(struct tty_struct *tty){ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__); - - if (!bluetooth) { - return; - } - - dbg("%s", __FUNCTION__); - - if (!bluetooth->open_count) { - dbg ("%s - device not open", __FUNCTION__); - return; - } - - if ((bluetooth->read_urb) && (bluetooth->read_urb->actual_length)) - usb_kill_urb(bluetooth->read_urb); -} -#endif - - -/***************************************************************************** - * urb callback functions - *****************************************************************************/ - - -static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__); - unsigned char *data = urb->transfer_buffer; - unsigned int i; - unsigned int count = urb->actual_length; - unsigned int packet_size; - int status; - - dbg("%s", __FUNCTION__); - - if (!bluetooth) { - dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__); - return; - } - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); - goto exit; - } - - if (!count) { - dbg("%s - zero length int", __FUNCTION__); - goto exit; - } - - -#ifdef DEBUG - if (count) { - printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count); - for (i = 0; i < count; ++i) { - printk ("%.2x ", data[i]); - } - printk ("\n"); - } -#endif - -#ifdef BTBUGGYHARDWARE - if ((count >= 2) && (data[0] == 0xFF) && (data[1] == 0x00)) { - data += 2; - count -= 2; - } - if (count == 0) { - urb->actual_length = 0; - goto exit; - } -#endif - /* We add a packet type identifier to the beginning of each - HCI frame. This makes the data in the tty look like a - serial USB devices. Each HCI frame can be broken across - multiple URBs so we buffer them until we have a full hci - packet */ - - if (!bluetooth->int_packet_pos) { - bluetooth->int_buffer[0] = EVENT_PKT; - bluetooth->int_packet_pos++; - } - - if (bluetooth->int_packet_pos + count > EVENT_BUFFER_SIZE) { - err("%s - exceeded EVENT_BUFFER_SIZE", __FUNCTION__); - bluetooth->int_packet_pos = 0; - goto exit; - } - - memcpy (&bluetooth->int_buffer[bluetooth->int_packet_pos], - urb->transfer_buffer, count); - bluetooth->int_packet_pos += count; - urb->actual_length = 0; - - if (bluetooth->int_packet_pos >= EVENT_HDR_SIZE) - packet_size = bluetooth->int_buffer[2]; - else - goto exit; - - if (packet_size + EVENT_HDR_SIZE < bluetooth->int_packet_pos) { - err("%s - packet was too long", __FUNCTION__); - bluetooth->int_packet_pos = 0; - goto exit; - } - - if (packet_size + EVENT_HDR_SIZE == bluetooth->int_packet_pos) { - for (i = 0; i < bluetooth->int_packet_pos; ++i) { - /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them */ - if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(bluetooth->tty); - } - tty_insert_flip_char(bluetooth->tty, bluetooth->int_buffer[i], 0); - } - tty_flip_buffer_push(bluetooth->tty); - - bluetooth->int_packet_pos = 0; - } - -exit: - status = usb_submit_urb (urb, GFP_ATOMIC); - if (status) - err ("%s - usb_submit_urb failed with result %d", - __FUNCTION__, status); -} - - -static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__); - - dbg("%s", __FUNCTION__); - - if (!bluetooth) { - dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__); - return; - } - - if (urb->status) { - dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); - return; - } -} - - -static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__); - unsigned char *data = urb->transfer_buffer; - unsigned int count = urb->actual_length; - unsigned int i; - unsigned int packet_size; - int result; - - - dbg("%s", __FUNCTION__); - - if (!bluetooth) { - dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__); - return; - } - - if (urb->status) { - dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); - if (urb->status == -ENOENT) { - dbg("%s - URB canceled, won't reschedule", __FUNCTION__); - return; - } - goto exit; - } - - if (!count) { - dbg("%s - zero length read bulk", __FUNCTION__); - goto exit; - } - -#ifdef DEBUG - if (count) { - printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count); - for (i = 0; i < count; ++i) { - printk ("%.2x ", data[i]); - } - printk ("\n"); - } -#endif -#ifdef BTBUGGYHARDWARE - if ((count == 4) && (data[0] == 0x00) && (data[1] == 0x00) - && (data[2] == 0x00) && (data[3] == 0x00)) { - urb->actual_length = 0; - usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev, - usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress), - bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size, - bluetooth_read_bulk_callback, bluetooth); - result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL); - if (result) - err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); - - return; - } -#endif - /* We add a packet type identifier to the beginning of each - HCI frame. This makes the data in the tty look like a - serial USB devices. Each HCI frame can be broken across - multiple URBs so we buffer them until we have a full hci - packet */ - - if (!bluetooth->bulk_packet_pos) { - bluetooth->bulk_buffer[0] = ACL_PKT; - bluetooth->bulk_packet_pos++; - } - - if (bluetooth->bulk_packet_pos + count > ACL_BUFFER_SIZE) { - err("%s - exceeded ACL_BUFFER_SIZE", __FUNCTION__); - bluetooth->bulk_packet_pos = 0; - goto exit; - } - - memcpy (&bluetooth->bulk_buffer[bluetooth->bulk_packet_pos], - urb->transfer_buffer, count); - bluetooth->bulk_packet_pos += count; - urb->actual_length = 0; - - if (bluetooth->bulk_packet_pos >= ACL_HDR_SIZE) { - packet_size = CHAR2INT16(bluetooth->bulk_buffer[4],bluetooth->bulk_buffer[3]); - } else { - goto exit; - } - - if (packet_size + ACL_HDR_SIZE < bluetooth->bulk_packet_pos) { - err("%s - packet was too long", __FUNCTION__); - bluetooth->bulk_packet_pos = 0; - goto exit; - } - - if (packet_size + ACL_HDR_SIZE == bluetooth->bulk_packet_pos) { - for (i = 0; i < bluetooth->bulk_packet_pos; ++i) { - /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */ - if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(bluetooth->tty); - } - tty_insert_flip_char(bluetooth->tty, bluetooth->bulk_buffer[i], 0); - } - tty_flip_buffer_push(bluetooth->tty); - bluetooth->bulk_packet_pos = 0; - } - -exit: - if (!bluetooth || !bluetooth->open_count) - return; - - usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev, - usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress), - bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size, - bluetooth_read_bulk_callback, bluetooth); - result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL); - if (result) - err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); - - return; -} - - -static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__); - - dbg("%s", __FUNCTION__); - - /* free up the transfer buffer, as usb_free_urb() does not do this */ - kfree(urb->transfer_buffer); - - if (!bluetooth) { - dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__); - return; - } - - if (urb->status) { - dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); - return; - } - - /* wake up our little function to let the tty layer know that something happened */ - schedule_work(&bluetooth->work); -} - - -static void bluetooth_softint(void *private) -{ - struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)private, __FUNCTION__); - - dbg("%s", __FUNCTION__); - - if (!bluetooth) - return; - - tty_wakeup(bluetooth->tty); -} - - -static int usb_bluetooth_probe (struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev (intf); - struct usb_bluetooth *bluetooth = NULL; - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - struct usb_endpoint_descriptor *interrupt_in_endpoint[8]; - struct usb_endpoint_descriptor *bulk_in_endpoint[8]; - struct usb_endpoint_descriptor *bulk_out_endpoint[8]; - int control_out_endpoint; - - int minor; - int buffer_size; - int i; - int num_interrupt_in = 0; - int num_bulk_in = 0; - int num_bulk_out = 0; - - interface = intf->cur_altsetting; - control_out_endpoint = interface->desc.bInterfaceNumber; - - /* find the endpoints that we need */ - for (i = 0; i < interface->desc.bNumEndpoints; ++i) { - endpoint = &interface->endpoint[i].desc; - - if ((endpoint->bEndpointAddress & 0x80) && - ((endpoint->bmAttributes & 3) == 0x02)) { - /* we found a bulk in endpoint */ - dbg("found bulk in"); - bulk_in_endpoint[num_bulk_in] = endpoint; - ++num_bulk_in; - } - - if (((endpoint->bEndpointAddress & 0x80) == 0x00) && - ((endpoint->bmAttributes & 3) == 0x02)) { - /* we found a bulk out endpoint */ - dbg("found bulk out"); - bulk_out_endpoint[num_bulk_out] = endpoint; - ++num_bulk_out; - } - - if ((endpoint->bEndpointAddress & 0x80) && - ((endpoint->bmAttributes & 3) == 0x03)) { - /* we found a interrupt in endpoint */ - dbg("found interrupt in"); - interrupt_in_endpoint[num_interrupt_in] = endpoint; - ++num_interrupt_in; - } - } - - /* according to the spec, we can only have 1 bulk_in, 1 bulk_out, and 1 interrupt_in endpoints */ - if ((num_bulk_in != 1) || - (num_bulk_out != 1) || - (num_interrupt_in != 1)) { - dbg ("%s - improper number of endpoints. Bluetooth driver not bound.", __FUNCTION__); - return -EIO; - } - - info("USB Bluetooth converter detected"); - - for (minor = 0; minor < BLUETOOTH_TTY_MINORS && bluetooth_table[minor]; ++minor) - ; - if (bluetooth_table[minor]) { - err("No more free Bluetooth devices"); - return -ENODEV; - } - - if (!(bluetooth = kmalloc(sizeof(struct usb_bluetooth), GFP_KERNEL))) { - err("Out of memory"); - return -ENOMEM; - } - - memset(bluetooth, 0, sizeof(struct usb_bluetooth)); - - bluetooth->magic = USB_BLUETOOTH_MAGIC; - bluetooth->dev = dev; - bluetooth->minor = minor; - INIT_WORK(&bluetooth->work, bluetooth_softint, bluetooth); - init_MUTEX(&bluetooth->lock); - - /* record the interface number for the control out */ - bluetooth->control_out_bInterfaceNum = control_out_endpoint; - - /* create our control out urb pool */ - for (i = 0; i < NUM_CONTROL_URBS; ++i) { - struct urb *urb = usb_alloc_urb(0, GFP_KERNEL); - if (urb == NULL) { - err("No free urbs available"); - goto probe_error; - } - urb->transfer_buffer = NULL; - bluetooth->control_urb_pool[i] = urb; - } - - /* set up the endpoint information */ - endpoint = bulk_in_endpoint[0]; - bluetooth->read_urb = usb_alloc_urb (0, GFP_KERNEL); - if (!bluetooth->read_urb) { - err("No free urbs available"); - goto probe_error; - } - bluetooth->bulk_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - bluetooth->bulk_in_endpointAddress = endpoint->bEndpointAddress; - bluetooth->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL); - if (!bluetooth->bulk_in_buffer) { - err("Couldn't allocate bulk_in_buffer"); - goto probe_error; - } - usb_fill_bulk_urb(bluetooth->read_urb, dev, usb_rcvbulkpipe(dev, endpoint->bEndpointAddress), - bluetooth->bulk_in_buffer, buffer_size, bluetooth_read_bulk_callback, bluetooth); - - endpoint = bulk_out_endpoint[0]; - bluetooth->bulk_out_endpointAddress = endpoint->bEndpointAddress; - bluetooth->bulk_out_buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2; - - endpoint = interrupt_in_endpoint[0]; - bluetooth->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!bluetooth->interrupt_in_urb) { - err("No free urbs available"); - goto probe_error; - } - bluetooth->interrupt_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - bluetooth->interrupt_in_endpointAddress = endpoint->bEndpointAddress; - bluetooth->interrupt_in_interval = endpoint->bInterval; - bluetooth->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL); - if (!bluetooth->interrupt_in_buffer) { - err("Couldn't allocate interrupt_in_buffer"); - goto probe_error; - } - usb_fill_int_urb(bluetooth->interrupt_in_urb, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), - bluetooth->interrupt_in_buffer, buffer_size, bluetooth_int_callback, - bluetooth, endpoint->bInterval); - - /* initialize the devfs nodes for this device and let the user know what bluetooths we are bound to */ - tty_register_device (bluetooth_tty_driver, minor, &intf->dev); - info("Bluetooth converter now attached to ttyUB%d (or usb/ttub/%d for devfs)", minor, minor); - - bluetooth_table[minor] = bluetooth; - - /* success */ - usb_set_intfdata (intf, bluetooth); - return 0; - -probe_error: - if (bluetooth->read_urb) - usb_free_urb (bluetooth->read_urb); - if (bluetooth->bulk_in_buffer) - kfree (bluetooth->bulk_in_buffer); - if (bluetooth->interrupt_in_urb) - usb_free_urb (bluetooth->interrupt_in_urb); - if (bluetooth->interrupt_in_buffer) - kfree (bluetooth->interrupt_in_buffer); - for (i = 0; i < NUM_CONTROL_URBS; ++i) - if (bluetooth->control_urb_pool[i]) { - if (bluetooth->control_urb_pool[i]->transfer_buffer) - kfree (bluetooth->control_urb_pool[i]->transfer_buffer); - usb_free_urb (bluetooth->control_urb_pool[i]); - } - - bluetooth_table[minor] = NULL; - - /* free up any memory that we allocated */ - kfree (bluetooth); - return -EIO; -} - - -static void usb_bluetooth_disconnect(struct usb_interface *intf) -{ - struct usb_bluetooth *bluetooth = usb_get_intfdata (intf); - int i; - - usb_set_intfdata (intf, NULL); - if (bluetooth) { - if ((bluetooth->open_count) && (bluetooth->tty)) - tty_hangup(bluetooth->tty); - - bluetooth->open_count = 0; - - if (bluetooth->read_urb) { - usb_kill_urb (bluetooth->read_urb); - usb_free_urb (bluetooth->read_urb); - } - if (bluetooth->bulk_in_buffer) - kfree (bluetooth->bulk_in_buffer); - - if (bluetooth->interrupt_in_urb) { - usb_kill_urb (bluetooth->interrupt_in_urb); - usb_free_urb (bluetooth->interrupt_in_urb); - } - if (bluetooth->interrupt_in_buffer) - kfree (bluetooth->interrupt_in_buffer); - - tty_unregister_device (bluetooth_tty_driver, bluetooth->minor); - - for (i = 0; i < NUM_CONTROL_URBS; ++i) { - if (bluetooth->control_urb_pool[i]) { - usb_kill_urb (bluetooth->control_urb_pool[i]); - if (bluetooth->control_urb_pool[i]->transfer_buffer) - kfree (bluetooth->control_urb_pool[i]->transfer_buffer); - usb_free_urb (bluetooth->control_urb_pool[i]); - } - } - - info("Bluetooth converter now disconnected from ttyUB%d", bluetooth->minor); - - bluetooth_table[bluetooth->minor] = NULL; - - /* free up any memory that we allocated */ - kfree (bluetooth); - } else { - info("device disconnected"); - } -} - -static struct tty_operations bluetooth_ops = { - .open = bluetooth_open, - .close = bluetooth_close, - .write = bluetooth_write, - .write_room = bluetooth_write_room, - .ioctl = bluetooth_ioctl, - .set_termios = bluetooth_set_termios, - .throttle = bluetooth_throttle, - .unthrottle = bluetooth_unthrottle, - .chars_in_buffer = bluetooth_chars_in_buffer, -}; - -static int usb_bluetooth_init(void) -{ - int i; - int result; - - /* Initialize our global data */ - for (i = 0; i < BLUETOOTH_TTY_MINORS; ++i) { - bluetooth_table[i] = NULL; - } - - info ("USB Bluetooth support registered"); - - bluetooth_tty_driver = alloc_tty_driver(BLUETOOTH_TTY_MINORS); - if (!bluetooth_tty_driver) - return -ENOMEM; - - bluetooth_tty_driver->owner = THIS_MODULE; - bluetooth_tty_driver->driver_name = "usb-bluetooth"; - bluetooth_tty_driver->name = "ttyUB"; - bluetooth_tty_driver->devfs_name = "usb/ttub/"; - bluetooth_tty_driver->major = BLUETOOTH_TTY_MAJOR; - bluetooth_tty_driver->minor_start = 0; - bluetooth_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - bluetooth_tty_driver->subtype = SERIAL_TYPE_NORMAL; - bluetooth_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; - bluetooth_tty_driver->init_termios = tty_std_termios; - bluetooth_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - tty_set_operations(bluetooth_tty_driver, &bluetooth_ops); - if (tty_register_driver (bluetooth_tty_driver)) { - err("%s - failed to register tty driver", __FUNCTION__); - put_tty_driver(bluetooth_tty_driver); - return -1; - } - - /* register the USB driver */ - result = usb_register(&usb_bluetooth_driver); - if (result < 0) { - tty_unregister_driver(bluetooth_tty_driver); - put_tty_driver(bluetooth_tty_driver); - err("usb_register failed for the USB bluetooth driver. Error number %d", result); - return -1; - } - - info(DRIVER_DESC " " DRIVER_VERSION); - - return 0; -} - - -static void usb_bluetooth_exit(void) -{ - usb_deregister(&usb_bluetooth_driver); - tty_unregister_driver(bluetooth_tty_driver); - put_tty_driver(bluetooth_tty_driver); -} - - -module_init(usb_bluetooth_init); -module_exit(usb_bluetooth_exit); - -/* Module information */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); - -- GitLab From ea65370d025f5005649e5cb37c4d025e92c6fc38 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0820/1519] [PATCH] USB Serial: rename usb_serial_device_type to usb_serial_driver I'm tired of trying to explain why a "device_type" is really a driver. This better describes exactly what this structure is. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 2 +- drivers/usb/serial/belkin_sa.c | 2 +- drivers/usb/serial/bus.c | 28 ++++++++++++------------- drivers/usb/serial/cp2101.c | 2 +- drivers/usb/serial/cyberjack.c | 2 +- drivers/usb/serial/cypress_m8.c | 4 ++-- drivers/usb/serial/digi_acceleport.c | 4 ++-- drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 2 +- drivers/usb/serial/garmin_gps.c | 7 +------ drivers/usb/serial/generic.c | 2 +- drivers/usb/serial/hp4x.c | 2 +- drivers/usb/serial/io_tables.h | 6 +++--- drivers/usb/serial/io_ti.c | 4 ++-- drivers/usb/serial/ipaq.c | 2 +- drivers/usb/serial/ipw.c | 2 +- drivers/usb/serial/ir-usb.c | 2 +- drivers/usb/serial/keyspan.h | 8 +++---- drivers/usb/serial/keyspan_pda.c | 6 +++--- drivers/usb/serial/kl5kusb105.c | 2 +- drivers/usb/serial/kobil_sct.c | 2 +- drivers/usb/serial/mct_u232.c | 2 +- drivers/usb/serial/omninet.c | 2 +- drivers/usb/serial/option.c | 2 +- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 4 ++-- drivers/usb/serial/usb-serial.c | 30 +++++++++++++-------------- drivers/usb/serial/usb-serial.h | 28 ++++++++++++------------- drivers/usb/serial/visor.c | 6 +++--- drivers/usb/serial/whiteheat.c | 4 ++-- 31 files changed, 85 insertions(+), 90 deletions(-) diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 926d4c2c1600..104c04385bb9 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -30,7 +30,7 @@ static struct usb_driver airprime_driver = { .id_table = id_table, }; -static struct usb_serial_device_type airprime_device = { +static struct usb_serial_driver airprime_device = { .owner = THIS_MODULE, .name = "airprime", .id_table = id_table, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index abb1b2c543bb..6d84de40cb7b 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -121,7 +121,7 @@ static struct usb_driver belkin_driver = { }; /* All of the device info needed for the serial converters */ -static struct usb_serial_device_type belkin_device = { +static struct usb_serial_driver belkin_device = { .owner = THIS_MODULE, .name = "Belkin / Peracom / GoHubs USB Serial Adapter", .short_name = "belkin", diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 2f612c2d894b..5a0bcd34bb6d 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -18,7 +18,7 @@ static int usb_serial_device_match (struct device *dev, struct device_driver *drv) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; const struct usb_serial_port *port; /* @@ -44,7 +44,7 @@ struct bus_type usb_serial_bus_type = { static int usb_serial_device_probe (struct device *dev) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; struct usb_serial_port *port; int retval = 0; int minor; @@ -80,7 +80,7 @@ static int usb_serial_device_probe (struct device *dev) static int usb_serial_device_remove (struct device *dev) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; struct usb_serial_port *port; int retval = 0; int minor; @@ -109,26 +109,26 @@ static int usb_serial_device_remove (struct device *dev) return retval; } -int usb_serial_bus_register(struct usb_serial_device_type *device) +int usb_serial_bus_register(struct usb_serial_driver *driver) { int retval; - if (device->short_name) - device->driver.name = (char *)device->short_name; + if (driver->short_name) + driver->driver.name = (char *)driver->short_name; else - device->driver.name = (char *)device->name; - device->driver.bus = &usb_serial_bus_type; - device->driver.probe = usb_serial_device_probe; - device->driver.remove = usb_serial_device_remove; - device->driver.owner = device->owner; + driver->driver.name = (char *)driver->name; + driver->driver.bus = &usb_serial_bus_type; + driver->driver.probe = usb_serial_device_probe; + driver->driver.remove = usb_serial_device_remove; + driver->driver.owner = driver->owner; - retval = driver_register(&device->driver); + retval = driver_register(&driver->driver); return retval; } -void usb_serial_bus_deregister(struct usb_serial_device_type *device) +void usb_serial_bus_deregister(struct usb_serial_driver *driver) { - driver_unregister (&device->driver); + driver_unregister(&driver->driver); } diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 97c78c21e8d1..0b45b58bef5f 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -73,7 +73,7 @@ static struct usb_driver cp2101_driver = { .id_table = id_table, }; -static struct usb_serial_device_type cp2101_device = { +static struct usb_serial_driver cp2101_device = { .owner = THIS_MODULE, .name = "CP2101", .id_table = id_table, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index b5b431067b08..9f421a3c47e8 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -83,7 +83,7 @@ static struct usb_driver cyberjack_driver = { .id_table = id_table, }; -static struct usb_serial_device_type cyberjack_device = { +static struct usb_serial_driver cyberjack_device = { .owner = THIS_MODULE, .name = "Reiner SCT Cyberjack USB card reader", .short_name = "cyberjack", diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 9ee1aaff2fcd..4fb8e59d1527 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -176,7 +176,7 @@ static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, u static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count); -static struct usb_serial_device_type cypress_earthmate_device = { +static struct usb_serial_driver cypress_earthmate_device = { .owner = THIS_MODULE, .name = "DeLorme Earthmate USB", .short_name = "earthmate", @@ -203,7 +203,7 @@ static struct usb_serial_device_type cypress_earthmate_device = { .write_int_callback = cypress_write_int_callback, }; -static struct usb_serial_device_type cypress_hidcom_device = { +static struct usb_serial_driver cypress_hidcom_device = { .owner = THIS_MODULE, .name = "HID->COM RS232 Adapter", .short_name = "cyphidcom", diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index a19a47f6cf12..66feb88b4316 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -503,7 +503,7 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ -static struct usb_serial_device_type digi_acceleport_2_device = { +static struct usb_serial_driver digi_acceleport_2_device = { .owner = THIS_MODULE, .name = "Digi 2 port USB adapter", .short_name = "digi_2", @@ -530,7 +530,7 @@ static struct usb_serial_device_type digi_acceleport_2_device = { .shutdown = digi_shutdown, }; -static struct usb_serial_device_type digi_acceleport_4_device = { +static struct usb_serial_driver digi_acceleport_4_device = { .owner = THIS_MODULE, .name = "Digi 4 port USB adapter", .short_name = "digi_4", diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 8d562ab454a8..cbea8b38b60e 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -112,7 +112,7 @@ static struct usb_driver empeg_driver = { .id_table = id_table, }; -static struct usb_serial_device_type empeg_device = { +static struct usb_serial_driver empeg_device = { .owner = THIS_MODULE, .name = "Empeg", .id_table = id_table, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b713113c1650..529e1a7ccfa0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -562,7 +562,7 @@ static unsigned short int ftdi_232am_baud_to_divisor (int baud); static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); -static struct usb_serial_device_type ftdi_sio_device = { +static struct usb_serial_driver ftdi_sio_device = { .owner = THIS_MODULE, .name = "FTDI USB Serial Device", .short_name = "ftdi_sio", diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 2ef614d5c8f2..7361194f1d66 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1468,13 +1468,8 @@ static void garmin_shutdown (struct usb_serial *serial) } - - - - - /* All of the device info needed */ -static struct usb_serial_device_type garmin_device = { +static struct usb_serial_driver garmin_device = { .owner = THIS_MODULE, .name = "Garmin GPS usb/tty", .short_name = "garmin_gps", diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 5f7d3193d355..7f567bf96549 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -36,7 +36,7 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ -struct usb_serial_device_type usb_serial_generic_device = { +struct usb_serial_driver usb_serial_generic_device = { .owner = THIS_MODULE, .name = "Generic", .short_name = "generic", diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 64d55fbd206e..b49469907a87 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -44,7 +44,7 @@ static struct usb_driver hp49gp_driver = { .id_table = id_table, }; -static struct usb_serial_device_type hp49gp_device = { +static struct usb_serial_driver hp49gp_device = { .owner = THIS_MODULE, .name = "HP4X", .id_table = id_table, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index e7ffe02408bd..7314c04727fe 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -75,7 +75,7 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); -static struct usb_serial_device_type edgeport_2port_device = { +static struct usb_serial_driver edgeport_2port_device = { .owner = THIS_MODULE, .name = "Edgeport 2 port adapter", .short_name = "edgeport_2", @@ -103,7 +103,7 @@ static struct usb_serial_device_type edgeport_2port_device = { .write_bulk_callback = edge_bulk_out_data_callback, }; -static struct usb_serial_device_type edgeport_4port_device = { +static struct usb_serial_driver edgeport_4port_device = { .owner = THIS_MODULE, .name = "Edgeport 4 port adapter", .short_name = "edgeport_4", @@ -131,7 +131,7 @@ static struct usb_serial_device_type edgeport_4port_device = { .write_bulk_callback = edge_bulk_out_data_callback, }; -static struct usb_serial_device_type edgeport_8port_device = { +static struct usb_serial_driver edgeport_8port_device = { .owner = THIS_MODULE, .name = "Edgeport 8 port adapter", .short_name = "edgeport_8", diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index ebf9967f7c86..4328cc702ef7 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2982,7 +2982,7 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, } -static struct usb_serial_device_type edgeport_1port_device = { +static struct usb_serial_driver edgeport_1port_device = { .owner = THIS_MODULE, .name = "Edgeport TI 1 port adapter", .short_name = "edgeport_ti_1", @@ -3010,7 +3010,7 @@ static struct usb_serial_device_type edgeport_1port_device = { .write_bulk_callback = edge_bulk_out_callback, }; -static struct usb_serial_device_type edgeport_2port_device = { +static struct usb_serial_driver edgeport_2port_device = { .owner = THIS_MODULE, .name = "Edgeport TI 2 port adapter", .short_name = "edgeport_ti_2", diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index c05c2a2a0f31..9a79ad8d7a5f 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -547,7 +547,7 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ -static struct usb_serial_device_type ipaq_device = { +static struct usb_serial_driver ipaq_device = { .owner = THIS_MODULE, .name = "PocketPC PDA", .id_table = ipaq_id_table, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 85e242459c27..04524d34de3b 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -443,7 +443,7 @@ static int ipw_disconnect(struct usb_serial_port *port) return 0; } -static struct usb_serial_device_type ipw_device = { +static struct usb_serial_driver ipw_device = { .owner = THIS_MODULE, .name = "IPWireless converter", .short_name = "ipw", diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 937b2fdd7171..ecfb2060ea0f 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -133,7 +133,7 @@ static struct usb_driver ir_driver = { }; -static struct usb_serial_device_type ir_device = { +static struct usb_serial_driver ir_device = { .owner = THIS_MODULE, .name = "IR Dongle", .id_table = id_table, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index e9b45b768aca..97e7d9e53e39 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -570,7 +570,7 @@ static struct usb_device_id keyspan_4port_ids[] = { }; /* Structs for the devices, pre and post renumeration. */ -static struct usb_serial_device_type keyspan_pre_device = { +static struct usb_serial_driver keyspan_pre_device = { .owner = THIS_MODULE, .name = "Keyspan - (without firmware)", .short_name = "keyspan_no_firm", @@ -582,7 +582,7 @@ static struct usb_serial_device_type keyspan_pre_device = { .attach = keyspan_fake_startup, }; -static struct usb_serial_device_type keyspan_1port_device = { +static struct usb_serial_driver keyspan_1port_device = { .owner = THIS_MODULE, .name = "Keyspan 1 port adapter", .short_name = "keyspan_1", @@ -607,7 +607,7 @@ static struct usb_serial_device_type keyspan_1port_device = { .shutdown = keyspan_shutdown, }; -static struct usb_serial_device_type keyspan_2port_device = { +static struct usb_serial_driver keyspan_2port_device = { .owner = THIS_MODULE, .name = "Keyspan 2 port adapter", .short_name = "keyspan_2", @@ -632,7 +632,7 @@ static struct usb_serial_device_type keyspan_2port_device = { .shutdown = keyspan_shutdown, }; -static struct usb_serial_device_type keyspan_4port_device = { +static struct usb_serial_driver keyspan_4port_device = { .owner = THIS_MODULE, .name = "Keyspan 4 port adapter", .short_name = "keyspan_4", diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 635c384cb15a..8fad0e963dd3 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -783,7 +783,7 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) } #ifdef KEYSPAN -static struct usb_serial_device_type keyspan_pda_fake_device = { +static struct usb_serial_driver keyspan_pda_fake_device = { .owner = THIS_MODULE, .name = "Keyspan PDA - (prerenumeration)", .short_name = "keyspan_pda_pre", @@ -797,7 +797,7 @@ static struct usb_serial_device_type keyspan_pda_fake_device = { #endif #ifdef XIRCOM -static struct usb_serial_device_type xircom_pgs_fake_device = { +static struct usb_serial_driver xircom_pgs_fake_device = { .owner = THIS_MODULE, .name = "Xircom / Entregra PGS - (prerenumeration)", .short_name = "xircom_no_firm", @@ -810,7 +810,7 @@ static struct usb_serial_device_type xircom_pgs_fake_device = { }; #endif -static struct usb_serial_device_type keyspan_pda_device = { +static struct usb_serial_driver keyspan_pda_device = { .owner = THIS_MODULE, .name = "Keyspan PDA", .short_name = "keyspan_pda", diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a11e829e38c8..be082706b952 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -123,7 +123,7 @@ static struct usb_driver kl5kusb105d_driver = { .id_table = id_table, }; -static struct usb_serial_device_type kl5kusb105d_device = { +static struct usb_serial_driver kl5kusb105d_device = { .owner = THIS_MODULE, .name = "KL5KUSB105D / PalmConnect", .short_name = "kl5kusb105d", diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index fe4c98a75171..94944340bb8d 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -105,7 +105,7 @@ static struct usb_driver kobil_driver = { }; -static struct usb_serial_device_type kobil_device = { +static struct usb_serial_driver kobil_device = { .owner = THIS_MODULE, .name = "KOBIL USB smart card terminal", .id_table = id_table, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 50b6369647d2..9470964316a7 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -132,7 +132,7 @@ static struct usb_driver mct_u232_driver = { .id_table = id_table_combined, }; -static struct usb_serial_device_type mct_u232_device = { +static struct usb_serial_driver mct_u232_device = { .owner = THIS_MODULE, .name = "MCT U232", .short_name = "mct_u232", diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 6a99ae192df1..53c0588877c0 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -88,7 +88,7 @@ static struct usb_driver omninet_driver = { }; -static struct usb_serial_device_type zyxel_omninet_device = { +static struct usb_serial_driver zyxel_omninet_device = { .owner = THIS_MODULE, .name = "ZyXEL - omni.net lcd plus usb", .short_name = "omninet", diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4989e5740d18..6ec9266e2e96 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -105,7 +105,7 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, wich the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_device_type option_3port_device = { +static struct usb_serial_driver option_3port_device = { .owner = THIS_MODULE, .name = "Option 3G data card", .short_name = "option", diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3cf245bdda54..7134648e078d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -175,7 +175,7 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ -static struct usb_serial_device_type pl2303_device = { +static struct usb_serial_driver pl2303_device = { .owner = THIS_MODULE, .name = "PL-2303", .id_table = id_table, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 88bf14abfa7a..87871bb647df 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -397,7 +397,7 @@ static int safe_startup (struct usb_serial *serial) return 0; } -static struct usb_serial_device_type safe_device = { +static struct usb_serial_driver safe_device = { .owner = THIS_MODULE, .name = "Safe", .id_table = id_table, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 59c88de3e7ae..f2efaf6f3d76 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -255,7 +255,7 @@ static struct usb_driver ti_usb_driver = { .id_table = ti_id_table_combined, }; -static struct usb_serial_device_type ti_1port_device = { +static struct usb_serial_driver ti_1port_device = { .owner = THIS_MODULE, .name = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, @@ -282,7 +282,7 @@ static struct usb_serial_device_type ti_1port_device = { .write_bulk_callback = ti_bulk_out_callback, }; -static struct usb_serial_device_type ti_2port_device = { +static struct usb_serial_driver ti_2port_device = { .owner = THIS_MODULE, .name = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e77fbdfc782d..cf083da15eb4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -823,7 +823,7 @@ static void port_release(struct device *dev) static struct usb_serial * create_serial (struct usb_device *dev, struct usb_interface *interface, - struct usb_serial_device_type *type) + struct usb_serial_driver *driver) { struct usb_serial *serial; @@ -834,22 +834,22 @@ static struct usb_serial * create_serial (struct usb_device *dev, } memset (serial, 0, sizeof(*serial)); serial->dev = usb_get_dev(dev); - serial->type = type; + serial->type = driver; serial->interface = interface; kref_init(&serial->kref); return serial; } -static struct usb_serial_device_type *search_serial_device(struct usb_interface *iface) +static struct usb_serial_driver *search_serial_device(struct usb_interface *iface) { struct list_head *p; const struct usb_device_id *id; - struct usb_serial_device_type *t; + struct usb_serial_driver *t; /* List trough know devices and see if the usb id matches */ list_for_each(p, &usb_serial_driver_list) { - t = list_entry(p, struct usb_serial_device_type, driver_list); + t = list_entry(p, struct usb_serial_driver, driver_list); id = usb_match_id(iface, t->id_table); if (id != NULL) { dbg("descriptor matches"); @@ -872,7 +872,7 @@ int usb_serial_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; - struct usb_serial_device_type *type = NULL; + struct usb_serial_driver *type = NULL; int retval; int minor; int buffer_size; @@ -1375,7 +1375,7 @@ module_exit(usb_serial_exit); } \ } while (0) -static void fixup_generic(struct usb_serial_device_type *device) +static void fixup_generic(struct usb_serial_driver *device) { set_to_generic_if_null(device, open); set_to_generic_if_null(device, write); @@ -1387,28 +1387,28 @@ static void fixup_generic(struct usb_serial_device_type *device) set_to_generic_if_null(device, shutdown); } -int usb_serial_register(struct usb_serial_device_type *new_device) +int usb_serial_register(struct usb_serial_driver *driver) { int retval; - fixup_generic(new_device); + fixup_generic(driver); /* Add this device to our list of devices */ - list_add(&new_device->driver_list, &usb_serial_driver_list); + list_add(&driver->driver_list, &usb_serial_driver_list); - retval = usb_serial_bus_register(new_device); + retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, new_device->name); - list_del(&new_device->driver_list); + err("problem %d when registering driver %s", retval, driver->name); + list_del(&driver->driver_list); } else - info("USB Serial support registered for %s", new_device->name); + info("USB Serial support registered for %s", driver->name); return retval; } -void usb_serial_deregister(struct usb_serial_device_type *device) +void usb_serial_deregister(struct usb_serial_driver *device) { info("USB Serial deregistering driver %s", device->name); list_del(&device->driver_list); diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 57f92f054c75..d6738b1b0429 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -143,7 +143,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void /** * usb_serial - structure used by the usb-serial core for a device * @dev: pointer to the struct usb_device for this device - * @type: pointer to the struct usb_serial_device_type for this device + * @type: pointer to the struct usb_serial_driver for this device * @interface: pointer to the struct usb_interface for this device * @minor: the starting minor number for this device * @num_ports: the number of ports this device has @@ -159,7 +159,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void */ struct usb_serial { struct usb_device * dev; - struct usb_serial_device_type * type; + struct usb_serial_driver * type; struct usb_interface * interface; unsigned char minor; unsigned char num_ports; @@ -188,11 +188,11 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) } /** - * usb_serial_device_type - a structure that defines a usb serial device - * @owner: pointer to the module that owns this device. - * @name: pointer to a string that describes this device. This string used + * usb_serial_driver - describes a usb serial driver + * @owner: pointer to the module that owns this driver. + * @name: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. - * @short_name: a pointer to a string that describes this device in + * @short_name: a pointer to a string that describes this driver in * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface * to describe the driver. * @id_table: pointer to a list of usb_device_id structures that define all @@ -221,13 +221,13 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * @shutdown: pointer to the driver's shutdown function. This will be * called when the device is removed from the system. * - * This structure is defines a USB Serial device. It provides all of + * This structure is defines a USB Serial driver. It provides all of * the information that the USB serial core code needs. If the function * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. */ -struct usb_serial_device_type { +struct usb_serial_driver { struct module *owner; char *name; char *short_name; @@ -269,10 +269,10 @@ struct usb_serial_device_type { void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs); void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs); }; -#define to_usb_serial_driver(d) container_of(d, struct usb_serial_device_type, driver) +#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver) -extern int usb_serial_register(struct usb_serial_device_type *new_device); -extern void usb_serial_deregister(struct usb_serial_device_type *device); +extern int usb_serial_register(struct usb_serial_driver *driver); +extern void usb_serial_deregister(struct usb_serial_driver *driver); extern void usb_serial_port_softint(void *private); extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); @@ -303,10 +303,10 @@ extern void usb_serial_generic_shutdown (struct usb_serial *serial); extern int usb_serial_generic_register (int debug); extern void usb_serial_generic_deregister (void); -extern int usb_serial_bus_register (struct usb_serial_device_type *device); -extern void usb_serial_bus_deregister (struct usb_serial_device_type *device); +extern int usb_serial_bus_register (struct usb_serial_driver *device); +extern void usb_serial_bus_deregister (struct usb_serial_driver *device); -extern struct usb_serial_device_type usb_serial_generic_device; +extern struct usb_serial_driver usb_serial_generic_device; extern struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 31c57adcb623..825451b3788c 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -311,7 +311,7 @@ static struct usb_driver visor_driver = { }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ -static struct usb_serial_device_type handspring_device = { +static struct usb_serial_driver handspring_device = { .owner = THIS_MODULE, .name = "Handspring Visor / Palm OS", .short_name = "visor", @@ -339,7 +339,7 @@ static struct usb_serial_device_type handspring_device = { }; /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ -static struct usb_serial_device_type clie_5_device = { +static struct usb_serial_driver clie_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 5.0", .short_name = "clie_5", @@ -367,7 +367,7 @@ static struct usb_serial_device_type clie_5_device = { }; /* device info for the Sony Clie OS version 3.5 */ -static struct usb_serial_device_type clie_3_5_device = { +static struct usb_serial_driver clie_3_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 3.5", .short_name = "clie_3.5", diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index cf3bc30675a1..dc06664bfa0e 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -156,7 +156,7 @@ static void whiteheat_unthrottle (struct usb_serial_port *port); static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); -static struct usb_serial_device_type whiteheat_fake_device = { +static struct usb_serial_driver whiteheat_fake_device = { .owner = THIS_MODULE, .name = "Connect Tech - WhiteHEAT - (prerenumeration)", .short_name = "whiteheatnofirm", @@ -169,7 +169,7 @@ static struct usb_serial_device_type whiteheat_fake_device = { .attach = whiteheat_firmware_attach, }; -static struct usb_serial_device_type whiteheat_device = { +static struct usb_serial_driver whiteheat_device = { .owner = THIS_MODULE, .name = "Connect Tech - WhiteHEAT", .short_name = "whiteheat", -- GitLab From 18fcac353fdc7cd072b0d24c8667042e675a4c11 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0821/1519] [PATCH] USB Serial: get rid of the .owner field in usb_serial_driver Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 4 +++- drivers/usb/serial/belkin_sa.c | 4 +++- drivers/usb/serial/bus.c | 9 ++++----- drivers/usb/serial/cp2101.c | 4 +++- drivers/usb/serial/cyberjack.c | 4 +++- drivers/usb/serial/cypress_m8.c | 8 ++++++-- drivers/usb/serial/digi_acceleport.c | 8 ++++++-- drivers/usb/serial/empeg.c | 4 +++- drivers/usb/serial/ftdi_sio.c | 4 +++- drivers/usb/serial/garmin_gps.c | 4 +++- drivers/usb/serial/generic.c | 4 +++- drivers/usb/serial/hp4x.c | 4 +++- drivers/usb/serial/io_tables.h | 12 +++++++++--- drivers/usb/serial/io_ti.c | 8 ++++++-- drivers/usb/serial/ipaq.c | 4 +++- drivers/usb/serial/ipw.c | 4 +++- drivers/usb/serial/ir-usb.c | 4 +++- drivers/usb/serial/keyspan.h | 16 ++++++++++++---- drivers/usb/serial/keyspan_pda.c | 12 +++++++++--- drivers/usb/serial/kl5kusb105.c | 4 +++- drivers/usb/serial/kobil_sct.c | 4 +++- drivers/usb/serial/mct_u232.c | 4 +++- drivers/usb/serial/omninet.c | 4 +++- drivers/usb/serial/option.c | 4 +++- drivers/usb/serial/pl2303.c | 4 +++- drivers/usb/serial/safe_serial.c | 4 +++- drivers/usb/serial/ti_usb_3410_5052.c | 8 ++++++-- drivers/usb/serial/usb-serial.c | 22 +++++++++++----------- drivers/usb/serial/usb-serial.h | 5 +++-- drivers/usb/serial/visor.c | 12 +++++++++--- drivers/usb/serial/whiteheat.c | 8 ++++++-- 31 files changed, 144 insertions(+), 60 deletions(-) diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 104c04385bb9..fbc5b9b44749 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -31,7 +31,9 @@ static struct usb_driver airprime_driver = { }; static struct usb_serial_driver airprime_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 6d84de40cb7b..4878961a0900 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -122,7 +122,9 @@ static struct usb_driver belkin_driver = { /* All of the device info needed for the serial converters */ static struct usb_serial_driver belkin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Belkin / Peracom / GoHubs USB Serial Adapter", .short_name = "belkin", .id_table = id_table_combined, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 5a0bcd34bb6d..b8364a8de7df 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -57,13 +57,13 @@ static int usb_serial_device_probe (struct device *dev) driver = port->serial->type; if (driver->port_probe) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_probe (port); - module_put(driver->owner); + module_put(driver->driver.owner); if (retval) goto exit; } @@ -92,13 +92,13 @@ static int usb_serial_device_remove (struct device *dev) driver = port->serial->type; if (driver->port_remove) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_remove (port); - module_put(driver->owner); + module_put(driver->driver.owner); } exit: minor = port->number; @@ -120,7 +120,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; - driver->driver.owner = driver->owner; retval = driver_register(&driver->driver); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 0b45b58bef5f..81dd720a122b 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -74,7 +74,9 @@ static struct usb_driver cp2101_driver = { }; static struct usb_serial_driver cp2101_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 9f421a3c47e8..3441bad74f7b 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -84,7 +84,9 @@ static struct usb_driver cyberjack_driver = { }; static struct usb_serial_driver cyberjack_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Reiner SCT Cyberjack USB card reader", .short_name = "cyberjack", .id_table = id_table, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 4fb8e59d1527..b4069af4d565 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -177,7 +177,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "DeLorme Earthmate USB", .short_name = "earthmate", .id_table = id_table_earthmate, @@ -204,7 +206,9 @@ static struct usb_serial_driver cypress_earthmate_device = { }; static struct usb_serial_driver cypress_hidcom_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HID->COM RS232 Adapter", .short_name = "cyphidcom", .id_table = id_table_cyphidcomrs232, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 66feb88b4316..be9b495d2491 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -504,7 +504,9 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ static struct usb_serial_driver digi_acceleport_2_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 2 port USB adapter", .short_name = "digi_2", .id_table = id_table_2, @@ -531,7 +533,9 @@ static struct usb_serial_driver digi_acceleport_2_device = { }; static struct usb_serial_driver digi_acceleport_4_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 4 port USB adapter", .short_name = "digi_4", .id_table = id_table_4, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index cbea8b38b60e..3e6c4ba7667b 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -113,7 +113,9 @@ static struct usb_driver empeg_driver = { }; static struct usb_serial_driver empeg_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 529e1a7ccfa0..9d945de0acac 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -563,7 +563,9 @@ static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "FTDI USB Serial Device", .short_name = "ftdi_sio", .id_table = id_table_combined, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 7361194f1d66..3fd98c00cd6a 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1470,7 +1470,9 @@ static void garmin_shutdown (struct usb_serial *serial) /* All of the device info needed */ static struct usb_serial_driver garmin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Garmin GPS usb/tty", .short_name = "garmin_gps", .id_table = id_table, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 7f567bf96549..779bea0c6242 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -37,7 +37,9 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Generic", .short_name = "generic", .id_table = generic_device_ids, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index b49469907a87..4f3cbc08c4ee 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -45,7 +45,9 @@ static struct usb_driver hp49gp_driver = { }; static struct usb_serial_driver hp49gp_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 7314c04727fe..28fb0d42a166 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -76,7 +76,9 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 2 port adapter", .short_name = "edgeport_2", .id_table = edgeport_2port_id_table, @@ -104,7 +106,9 @@ static struct usb_serial_driver edgeport_2port_device = { }; static struct usb_serial_driver edgeport_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 4 port adapter", .short_name = "edgeport_4", .id_table = edgeport_4port_id_table, @@ -132,7 +136,9 @@ static struct usb_serial_driver edgeport_4port_device = { }; static struct usb_serial_driver edgeport_8port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 8 port adapter", .short_name = "edgeport_8", .id_table = edgeport_8port_id_table, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 4328cc702ef7..74228a072643 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2983,7 +2983,9 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 1 port adapter", .short_name = "edgeport_ti_1", .id_table = edgeport_1port_id_table, @@ -3011,7 +3013,9 @@ static struct usb_serial_driver edgeport_1port_device = { }; static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 2 port adapter", .short_name = "edgeport_ti_2", .id_table = edgeport_2port_id_table, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9a79ad8d7a5f..9aedfb91b20c 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -548,7 +548,9 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ static struct usb_serial_driver ipaq_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 04524d34de3b..2ba69623ac05 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -444,7 +444,9 @@ static int ipw_disconnect(struct usb_serial_port *port) } static struct usb_serial_driver ipw_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IPWireless converter", .short_name = "ipw", .id_table = usb_ipw_ids, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index ecfb2060ea0f..bf079059819e 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -134,7 +134,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 97e7d9e53e39..124d46e76a2e 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -571,7 +571,9 @@ static struct usb_device_id keyspan_4port_ids[] = { /* Structs for the devices, pre and post renumeration. */ static struct usb_serial_driver keyspan_pre_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan - (without firmware)", .short_name = "keyspan_no_firm", .id_table = keyspan_pre_ids, @@ -583,7 +585,9 @@ static struct usb_serial_driver keyspan_pre_device = { }; static struct usb_serial_driver keyspan_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 1 port adapter", .short_name = "keyspan_1", .id_table = keyspan_1port_ids, @@ -608,7 +612,9 @@ static struct usb_serial_driver keyspan_1port_device = { }; static struct usb_serial_driver keyspan_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 2 port adapter", .short_name = "keyspan_2", .id_table = keyspan_2port_ids, @@ -633,7 +639,9 @@ static struct usb_serial_driver keyspan_2port_device = { }; static struct usb_serial_driver keyspan_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 4 port adapter", .short_name = "keyspan_4", .id_table = keyspan_4port_ids, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 8fad0e963dd3..389b7833e3ae 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -784,7 +784,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) #ifdef KEYSPAN static struct usb_serial_driver keyspan_pda_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA - (prerenumeration)", .short_name = "keyspan_pda_pre", .id_table = id_table_fake, @@ -798,7 +800,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { #ifdef XIRCOM static struct usb_serial_driver xircom_pgs_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Xircom / Entregra PGS - (prerenumeration)", .short_name = "xircom_no_firm", .id_table = id_table_fake_xircom, @@ -811,7 +815,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { #endif static struct usb_serial_driver keyspan_pda_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA", .short_name = "keyspan_pda", .id_table = id_table_std, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index be082706b952..586108ce7897 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -124,7 +124,9 @@ static struct usb_driver kl5kusb105d_driver = { }; static struct usb_serial_driver kl5kusb105d_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KL5KUSB105D / PalmConnect", .short_name = "kl5kusb105d", .id_table = id_table, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 94944340bb8d..a9578e05b22f 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -106,7 +106,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 9470964316a7..7dcf91c5f83d 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -133,7 +133,9 @@ static struct usb_driver mct_u232_driver = { }; static struct usb_serial_driver mct_u232_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "MCT U232", .short_name = "mct_u232", .id_table = id_table_combined, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 53c0588877c0..f6327cc1b2e7 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -89,7 +89,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "ZyXEL - omni.net lcd plus usb", .short_name = "omninet", .id_table = id_table, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6ec9266e2e96..a2b5adf34868 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -106,7 +106,9 @@ static struct usb_driver option_driver = { * recognizes separately, thus num_port=1. */ static struct usb_serial_driver option_3port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Option 3G data card", .short_name = "option", .id_table = option_ids, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7134648e078d..beef3c4cee6e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -176,7 +176,9 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ static struct usb_serial_driver pl2303_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 87871bb647df..42a86ab689f4 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -398,7 +398,9 @@ static int safe_startup (struct usb_serial *serial) } static struct usb_serial_driver safe_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index f2efaf6f3d76..eab8a6de0925 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -256,7 +256,9 @@ static struct usb_driver ti_usb_driver = { }; static struct usb_serial_driver ti_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, @@ -283,7 +285,9 @@ static struct usb_serial_driver ti_1port_device = { }; static struct usb_serial_driver ti_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf083da15eb4..08f600327db4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -507,7 +507,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) /* lock this module before we call it * this may fail, which means we must bail out, * safe because we are called with BKL held */ - if (!try_module_get(serial->type->owner)) { + if (!try_module_get(serial->type->driver.owner)) { retval = -ENODEV; goto bailout_kref_put; } @@ -522,7 +522,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) return 0; bailout_module_put: - module_put(serial->type->owner); + module_put(serial->type->driver.owner); bailout_kref_put: kref_put(&serial->kref, destroy_serial); port->open_count = 0; @@ -553,7 +553,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp) port->tty = NULL; } - module_put(port->serial->type->owner); + module_put(port->serial->type->driver.owner); } kref_put(&port->serial->kref, destroy_serial); @@ -718,8 +718,8 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int continue; length += sprintf (page+length, "%d:", i); - if (serial->type->owner) - length += sprintf (page+length, " module:%s", module_name(serial->type->owner)); + if (serial->type->driver.owner) + length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); length += sprintf (page+length, " name:\"%s\"", serial->type->name); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), @@ -900,7 +900,7 @@ int usb_serial_probe(struct usb_interface *interface, if (type->probe) { const struct usb_device_id *id; - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; @@ -908,7 +908,7 @@ int usb_serial_probe(struct usb_interface *interface, id = usb_match_id(interface, type->id_table); retval = type->probe(serial, id); - module_put(type->owner); + module_put(type->driver.owner); if (retval) { dbg ("sub driver rejected device"); @@ -1007,13 +1007,13 @@ int usb_serial_probe(struct usb_interface *interface, if (!num_ports) { /* if this device type has a calc_num_ports function, call it */ if (type->calc_num_ports) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; } num_ports = type->calc_num_ports (serial); - module_put(type->owner); + module_put(type->driver.owner); } if (!num_ports) num_ports = type->num_ports; @@ -1158,12 +1158,12 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has an attach function, call it */ if (type->attach) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); goto probe_error; } retval = type->attach (serial); - module_put(type->owner); + module_put(type->driver.owner); if (retval < 0) goto probe_error; if (retval > 0) { diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index d6738b1b0429..4ca5e0c05611 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -189,7 +189,6 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @owner: pointer to the module that owns this driver. * @name: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. * @short_name: a pointer to a string that describes this driver in @@ -226,9 +225,11 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. + * + * The driver.owner field should be set to the module owner of this driver. + * */ struct usb_serial_driver { - struct module *owner; char *name; char *short_name; const struct usb_device_id *id_table; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 825451b3788c..0ac0377e8683 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -312,7 +312,9 @@ static struct usb_driver visor_driver = { /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ static struct usb_serial_driver handspring_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Handspring Visor / Palm OS", .short_name = "visor", .id_table = id_table, @@ -340,7 +342,9 @@ static struct usb_serial_driver handspring_device = { /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ static struct usb_serial_driver clie_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 5.0", .short_name = "clie_5", .id_table = clie_id_5_table, @@ -368,7 +372,9 @@ static struct usb_serial_driver clie_5_device = { /* device info for the Sony Clie OS version 3.5 */ static struct usb_serial_driver clie_3_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 3.5", .short_name = "clie_3.5", .id_table = clie_id_3_5_table, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index dc06664bfa0e..fb95a34a1cf7 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -157,7 +157,9 @@ static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT - (prerenumeration)", .short_name = "whiteheatnofirm", .id_table = id_table_prerenumeration, @@ -170,7 +172,9 @@ static struct usb_serial_driver whiteheat_fake_device = { }; static struct usb_serial_driver whiteheat_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT", .short_name = "whiteheat", .id_table = id_table_std, -- GitLab From 502b95c1cc9e2c855a26f90fc999c5211b8ba957 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0822/1519] [PATCH] USB Serial: move old changelog comments out of source code Create a new file just for these things, as they just get in the way in the source files. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ChangeLog.old | 730 +++++++++++++++++++++++++++++++ drivers/usb/serial/io_edgeport.c | 219 ---------- drivers/usb/serial/pl2303.c | 23 +- drivers/usb/serial/usb-serial.c | 309 +------------ drivers/usb/serial/usb-serial.h | 44 +- drivers/usb/serial/visor.c | 131 +----- 6 files changed, 736 insertions(+), 720 deletions(-) create mode 100644 drivers/usb/serial/ChangeLog.old diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old new file mode 100644 index 000000000000..c1b279939bbf --- /dev/null +++ b/drivers/usb/serial/ChangeLog.old @@ -0,0 +1,730 @@ +This is the contents of some of the drivers/usb/serial/ files that had old +changelog comments. They were quite old, and out of date, and we don't keep +them anymore, so I've put them here, away from the source files, in case +people still care to see them. + +- Greg Kroah-Hartman October 20, 2005 + +----------------------------------------------------------------------- +usb-serial.h Change Log comments: + + (03/26/2002) gkh + removed the port->tty check from port_paranoia_check() due to serial + consoles not having a tty device assigned to them. + + (12/03/2001) gkh + removed active from the port structure. + added documentation to the usb_serial_device_type structure + + (10/10/2001) gkh + added vendor and product to serial structure. Needed to determine device + owner when the device is disconnected. + + (05/30/2001) gkh + added sem to port structure and removed port_lock + + (10/05/2000) gkh + Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help + fix bug with urb->dev not being set properly, now that the usb core + needs it. + + (09/11/2000) gkh + Added usb_serial_debug_data function to help get rid of #DEBUG in the + drivers. + + (08/28/2000) gkh + Added port_lock to port structure. + + (08/08/2000) gkh + Added open_count to port structure. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + +----------------------------------------------------------------------- +usb-serial.c Change Log comments: + + (12/10/2002) gkh + Split the ports off into their own struct device, and added a + usb-serial bus driver. + + (11/19/2002) gkh + removed a few #ifdefs for the generic code and cleaned up the failure + logic in initialization. + + (10/02/2002) gkh + moved the console code to console.c and out of this file. + + (06/05/2002) gkh + moved location of startup() call in serial_probe() until after all + of the port information and endpoints are initialized. This makes + things easier for some drivers. + + (04/10/2002) gkh + added serial_read_proc function which creates a + /proc/tty/driver/usb-serial file. + + (03/27/2002) gkh + Got USB serial console code working properly and merged into the main + version of the tree. Thanks to Randy Dunlap for the initial version + of this code, and for pushing me to finish it up. + The USB serial console works with any usb serial driver device. + + (03/21/2002) gkh + Moved all manipulation of port->open_count into the core. Now the + individual driver's open and close functions are called only when the + first open() and last close() is called. Making the drivers a bit + smaller and simpler. + Fixed a bug if a driver didn't have the owner field set. + + (02/26/2002) gkh + Moved all locking into the main serial_* functions, instead of having + the individual drivers have to grab the port semaphore. This should + reduce races. + Reworked the MOD_INC logic a bit to always increment and decrement, even + if the generic driver is being used. + + (10/10/2001) gkh + usb_serial_disconnect() now sets the serial->dev pointer is to NULL to + help prevent child drivers from accessing the device since it is now + gone. + + (09/13/2001) gkh + Moved generic driver initialize after we have registered with the USB + core. Thanks to Randy Dunlap for pointing this problem out. + + (07/03/2001) gkh + Fixed module paramater size. Thanks to John Brockmeyer for the pointer. + Fixed vendor and product getting defined through the MODULE_PARM macro + if the Generic driver wasn't compiled in. + Fixed problem with generic_shutdown() not being called for drivers that + don't have a shutdown() function. + + (06/06/2001) gkh + added evil hack that is needed for the prolific pl2303 device due to the + crazy way its endpoints are set up. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (04/08/2001) gb + Identify version on module load. + + 2001_02_05 gkh + Fixed buffer overflows bug with the generic serial driver. Thanks to + Todd Squires for fixing this. + + (01/10/2001) gkh + Fixed bug where the generic serial adaptor grabbed _any_ device that was + offered to it. + + (12/12/2000) gkh + Removed MOD_INC and MOD_DEC from poll and disconnect functions, and + moved them to the serial_open and serial_close functions. + Also fixed bug with there not being a MOD_DEC for the generic driver + (thanks to Gary Brubaker for finding this.) + + (11/29/2000) gkh + Small NULL pointer initialization cleanup which saves a bit of disk image + + (11/01/2000) Adam J. Richter + instead of using idVendor/idProduct pairs, usb serial drivers + now identify their hardware interest with usb_device_id tables, + which they usually have anyhow for use with MODULE_DEVICE_TABLE. + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (08/28/2000) gkh + Added port_lock to port structure. + Added locks for SMP safeness to generic driver + Fixed the ability to open a generic device's port more than once. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + + (07/03/2000) gkh + Added more debugging to serial_ioctl call + + (06/25/2000) gkh + Changed generic_write_bulk_callback to not call wake_up_interruptible + directly, but to have port_softint do it at a safer time. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (05/22/2000) gkh + Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be + removed from the individual device source files. + + (05/03/2000) gkh + Added the Digi Acceleport driver from Al Borchers and Peter Berger. + + (05/02/2000) gkh + Changed devfs and tty register code to work properly now. This was based on + the ACM driver changes by Vojtech Pavlik. + + (04/27/2000) Ryan VanderBijl + Put calls to *_paranoia_checks into one function. + + (04/23/2000) gkh + Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. + Moved when the startup code printed out the devices that are supported. + + (04/19/2000) gkh + Added driver for ZyXEL omni.net lcd plus ISDN TA + Made startup info message specify which drivers were compiled in. + + (04/03/2000) gkh + Changed the probe process to remove the module unload races. + Changed where the tty layer gets initialized to have devfs work nicer. + Added initial devfs support. + + (03/26/2000) gkh + Split driver up into device specific pieces. + + (03/19/2000) gkh + Fixed oops that could happen when device was removed while a program + was talking to the device. + Removed the static urbs and now all urbs are created and destroyed + dynamically. + Reworked the internal interface. Now everything is based on the + usb_serial_port structure instead of the larger usb_serial structure. + This fixes the bug that a multiport device could not have more than + one port open at one time. + + (03/17/2000) gkh + Added config option for debugging messages. + Added patch for keyspan pda from Brian Warner. + + (03/06/2000) gkh + Added the keyspan pda code from Brian Warner + Moved a bunch of the port specific stuff into its own structure. This + is in anticipation of the true multiport devices (there's a bug if you + try to access more than one port of any multiport device right now) + + (02/21/2000) gkh + Made it so that any serial devices only have to specify which functions + they want to overload from the generic function calls (great, + inheritance in C, in a driver, just what I wanted...) + Added support for set_termios and ioctl function calls. No drivers take + advantage of this yet. + Removed the #ifdef MODULE, now there is no module specific code. + Cleaned up a few comments in usb-serial.h that were wrong (thanks again + to Miles Lott). + Small fix to get_free_serial. + + (02/14/2000) gkh + Removed the Belkin and Peracom functionality from the driver due to + the lack of support from the vendor, and me not wanting people to + accidenatly buy the device, expecting it to work with Linux. + Added read_bulk_callback and write_bulk_callback to the type structure + for the needs of the FTDI and WhiteHEAT driver. + Changed all reverences to FTDI to FTDI_SIO at the request of Bill + Ryder. + Changed the output urb size back to the max endpoint size to make + the ftdi_sio driver have it easier, and due to the fact that it didn't + really increase the speed any. + + (02/11/2000) gkh + Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a + patch from Miles Lott (milos@insync.net). + Fixed bug with not restoring the minor range that a device grabs, if + the startup function fails (thanks Miles for finding this). + + (02/05/2000) gkh + Added initial framework for the Keyspan PDA serial converter so that + Brian Warner has a place to put his code. + Made the ezusb specific functions generic enough that different + devices can use them (whiteheat and keyspan_pda both need them). + Split out a whole bunch of structure and other stuff to a separate + usb-serial.h file. + Made the Visor connection messages a little more understandable, now + that Miles Lott (milos@insync.net) has gotten the Generic channel to + work. Also made them always show up in the log file. + + (01/25/2000) gkh + Added initial framework for FTDI serial converter so that Bill Ryder + has a place to put his code. + Added the vendor specific info from Handspring. Now we can print out + informational debug messages as well as understand what is happening. + + (01/23/2000) gkh + Fixed problem of crash when trying to open a port that didn't have a + device assigned to it. Made the minor node finding a little smarter, + now it looks to find a continuous space for the new device. + + (01/21/2000) gkh + Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) + Fixed get_serial_by_minor which was all messed up for multi port + devices. Fixed multi port problem for generic devices. Now the number + of ports is determined by the number of bulk out endpoints for the + generic device. + + (01/19/2000) gkh + Removed lots of cruft that was around from the old (pre urb) driver + interface. + Made the serial_table dynamic. This should save lots of memory when + the number of minor nodes goes up to 256. + Added initial support for devices that have more than one port. + Added more debugging comments for the Visor, and added a needed + set_configuration call. + + (01/17/2000) gkh + Fixed the WhiteHEAT firmware (my processing tool had a bug) + and added new debug loader firmware for it. + Removed the put_char function as it isn't really needed. + Added visor startup commands as found by the Win98 dump. + + (01/13/2000) gkh + Fixed the vendor id for the generic driver to the one I meant it to be. + + (01/12/2000) gkh + Forget the version numbering...that's pretty useless... + Made the driver able to be compiled so that the user can select which + converter they want to use. This allows people who only want the Visor + support to not pay the memory size price of the WhiteHEAT. + Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) + grabbed the root hub. Not good. + + version 0.4.0 (01/10/2000) gkh + Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT + device. Added startup function to allow firmware to be downloaded to + a device if it needs to be. + Added firmware download logic to the WhiteHEAT device. + Started to add #defines to split up the different drivers for potential + configuration option. + + version 0.3.1 (12/30/99) gkh + Fixed problems with urb for bulk out. + Added initial support for multiple sets of endpoints. This enables + the Handspring Visor to be attached successfully. Only the first + bulk in / bulk out endpoint pair is being used right now. + + version 0.3.0 (12/27/99) gkh + Added initial support for the Handspring Visor based on a patch from + Miles Lott (milos@sneety.insync.net) + Cleaned up the code a bunch and converted over to using urbs only. + + version 0.2.3 (12/21/99) gkh + Added initial support for the Connect Tech WhiteHEAT converter. + Incremented the number of ports in expectation of getting the + WhiteHEAT to work properly (4 ports per connection). + Added notification on insertion and removal of what port the + device is/was connected to (and what kind of device it was). + + version 0.2.2 (12/16/99) gkh + Changed major number to the new allocated number. We're legal now! + + version 0.2.1 (12/14/99) gkh + Fixed bug that happens when device node is opened when there isn't a + device attached to it. Thanks to marek@webdesign.no for noticing this. + + version 0.2.0 (11/10/99) gkh + Split up internals to make it easier to add different types of serial + converters to the code. + Added a "generic" driver that gets it's vendor and product id + from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) + for the idea and sample code (from the usb scanner driver.) + Cleared up any licensing questions by releasing it under the GNU GPL. + + version 0.1.2 (10/25/99) gkh + Fixed bug in detecting device. + + version 0.1.1 (10/05/99) gkh + Changed the major number to not conflict with anything else. + + version 0.1 (09/28/99) gkh + Can recognize the two different devices and start up a read from + device when asked to. Writes also work. No control signals yet, this + all is vendor specific data (i.e. no spec), also no control for + different baud rates or other bit settings. + Currently we are using the same devid as the acm driver. This needs + to change. + +----------------------------------------------------------------------- +visor.c Change Log comments: + + (06/03/2003) Judd Montgomery + Added support for module parameter options for untested/unknown + devices. + + (03/09/2003) gkh + Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl + for the information. + + (03/05/2003) gkh + Think Treo support is now working. + + (04/03/2002) gkh + Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI + for the information. + + (03/27/2002) gkh + Removed assumptions that port->tty was always valid (is not true + for usb serial console devices.) + + (03/23/2002) gkh + Added support for the Palm i705 device, thanks to Thomas Riemer + for the information. + + (03/21/2002) gkh + Added support for the Palm m130 device, thanks to Udo Eisenbarth + for the information. + + (02/27/2002) gkh + Reworked the urb handling logic. We have no more pool, but dynamically + allocate the urb and the transfer buffer on the fly. In testing this + does not incure any measurable overhead. This also relies on the fact + that we have proper reference counting logic for urbs. + + (02/21/2002) SilaS + Added initial support for the Palm m515 devices. + + (02/14/2002) gkh + Added support for the Clie S-360 device. + + (12/18/2001) gkh + Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand + for the patch. + + (11/11/2001) gkh + Added support for the m125 devices, and added check to prevent oopses + for Clié devices that lie about the number of ports they have. + + (08/30/2001) gkh + Added support for the Clie devices, both the 3.5 and 4.0 os versions. + Many thanks to Daniel Burke, and Bryan Payne for helping with this. + + (08/23/2001) gkh + fixed a few potential bugs pointed out by Oliver Neukum. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (05/28/2000) gkh + Added initial support for the Palm m500 and Palm m505 devices. + + (04/08/2001) gb + Identify version on module load. + + (01/21/2000) gkh + Added write_room and chars_in_buffer, as they were previously using the + generic driver versions which is all wrong now that we are using an urb + pool. Thanks to Wolfgang Grandegger for pointing this out to me. + Removed count assignment in the write function, which was not needed anymore + either. Thanks to Al Borchers for pointing this out. + + (12/12/2000) gkh + Moved MOD_DEC to end of visor_close to be nicer, as the final write + message can sleep. + + (11/12/2000) gkh + Fixed bug with data being dropped on the floor by forcing tty->low_latency + to be on. Hopefully this fixes the OHCI issue! + + (11/01/2000) Adam J. Richter + usb_device_id table support + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Got rid of always calling kmalloc for every urb we wrote out to the + device. + Added visor_read_callback so we can keep track of bytes in and out for + those people who like to know the speed of their device. + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (09/06/2000) gkh + Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ + the host controller drivers set urb->dev = NULL when the urb is finished. + + (08/28/2000) gkh + Added locks for SMP safeness. + + (08/08/2000) gkh + Fixed endian problem in visor_startup. + Fixed MOD_INC and MOD_DEC logic and the ability to open a port more + than once. + + (07/23/2000) gkh + Added pool of write urbs to speed up transfers to the visor. + + (07/19/2000) gkh + Added module_init and module_exit functions to handle the fact that this + driver is a loadable module now. + + (07/03/2000) gkh + Added visor_set_ioctl and visor_set_termios functions (they don't do much + of anything, but are good for debugging.) + + (06/25/2000) gkh + Fixed bug in visor_unthrottle that should help with the disconnect in PPP + bug that people have been reporting. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (04/27/2000) Ryan VanderBijl + Fixed memory leak in visor_close + + (03/26/2000) gkh + Split driver up into device specific pieces. + +----------------------------------------------------------------------- +pl2303.c Change Log comments: + + 2002_Mar_26 gkh + allowed driver to work properly if there is no tty assigned to a port + (this happens for serial console devices.) + + 2001_Oct_06 gkh + Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. + + 2001_Sep_19 gkh + Added break support. + + 2001_Aug_30 gkh + fixed oops in write_bulk_callback. + + 2001_Aug_28 gkh + reworked buffer logic to be like other usb-serial drivers. Hopefully + removing some reported problems. + + 2001_Jun_06 gkh + finished porting to 2.4 format. + + +----------------------------------------------------------------------- +io_edgeport.c Change Log comments: + + 2003_04_03 al borchers + - fixed a bug (that shows up with dosemu) where the tty struct is + used in a callback after it has been freed + + 2.3 2002_03_08 greg kroah-hartman + - fixed bug when multiple devices were attached at the same time. + + 2.2 2001_11_14 greg kroah-hartman + - fixed bug in edge_close that kept the port from being used more + than once. + - fixed memory leak on device removal. + - fixed potential double free of memory when command urb submitting + failed. + - other small cleanups when the device is removed + + 2.1 2001_07_09 greg kroah-hartman + - added support for TIOCMBIS and TIOCMBIC. + + (04/08/2001) gb + - Identify version on module load. + + 2.0 2001_03_05 greg kroah-hartman + - reworked entire driver to fit properly in with the other usb-serial + drivers. Occasional oopses still happen, but it's a good start. + + 1.2.3 (02/23/2001) greg kroah-hartman + - changed device table to work properly for 2.4.x final format. + - fixed problem with dropping data at high data rates. + + 1.2.2 (11/27/2000) greg kroah-hartman + - cleaned up more NTisms. + - Added device table for 2.4.0-test11 + + 1.2.1 (11/08/2000) greg kroah-hartman + - Started to clean up NTisms. + - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 + + 1.2 (10/17/2000) David Iacovelli + Remove all EPIC code and GPL source + Fix RELEVANT_IFLAG macro to include flow control + changes port configuration changes. + Fix redefinition of SERIAL_MAGIC + Change all timeout values to 5 seconds + Tried to fix the UHCI multiple urb submission, but failed miserably. + it seems to work fine with OHCI. + ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must + find a way to work arount this UHCI bug ) + + 1.1 (10/11/2000) David Iacovelli + Fix XON/XOFF flow control to support both IXON and IXOFF + + 0.9.27 (06/30/2000) David Iacovelli + Added transmit queue and now allocate urb for command writes. + + 0.9.26 (06/29/2000) David Iacovelli + Add support for 80251 based edgeport + + 0.9.25 (06/27/2000) David Iacovelli + Do not close the port if it has multiple opens. + + 0.9.24 (05/26/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + and first cut at running BlackBox Demo + + 0.9.23 (05/24/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + + 0.9.22 (05/23/2000) David Iacovelli + fixed bug in enumeration. If epconfig turns on mapping by + path after a device is already plugged in, we now update + the mapping correctly + + 0.9.21 (05/16/2000) David Iacovelli + Added BlockUntilChaseResp() to also wait for txcredits + Updated the way we allocate and handle write URBs + Add debug code to dump buffers + + 0.9.20 (05/01/2000) David Iacovelli + change driver to use usb/tts/ + + 0.9.19 (05/01/2000) David Iacovelli + Update code to compile if DEBUG is off + + 0.9.18 (04/28/2000) David Iacovelli + cleanup and test tty_register with devfs + + 0.9.17 (04/27/2000) greg kroah-hartman + changed tty_register around to be like the way it + was before, but now it works properly with devfs. + + 0.9.16 (04/26/2000) david iacovelli + Fixed bug in GetProductInfo() + + 0.9.15 (04/25/2000) david iacovelli + Updated enumeration + + 0.9.14 (04/24/2000) david iacovelli + Removed all config/status IOCTLS and + converted to using /proc/edgeport + still playing with devfs + + 0.9.13 (04/24/2000) david iacovelli + Removed configuration based on ttyUSB0 + Added support for configuration using /prod/edgeport + first attempt at using devfs (not working yet!) + Added IOCTL to GetProductInfo() + Added support for custom baud rates + Add support for random port numbers + + 0.9.12 (04/18/2000) david iacovelli + added additional configuration IOCTLs + use ttyUSB0 for configuration + + 0.9.11 (04/17/2000) greg kroah-hartman + fixed module initialization race conditions. + made all urbs dynamically allocated. + made driver devfs compatible. now it only registers the tty device + when the device is actually plugged in. + + 0.9.10 (04/13/2000) greg kroah-hartman + added proc interface framework. + + 0.9.9 (04/13/2000) david iacovelli + added enumeration code and ioctls to configure the device + + 0.9.8 (04/12/2000) david iacovelli + Change interrupt read start when device is plugged in + and stop when device is removed + process interrupt reads when all ports are closed + (keep value of rxBytesAvail consistent with the edgeport) + set the USB_BULK_QUEUE flag so that we can shove a bunch + of urbs at once down the pipe + + 0.9.7 (04/10/2000) david iacovelli + start to add enumeration code. + generate serial number for epic devices + add support for kdb + + 0.9.6 (03/30/2000) david iacovelli + add IOCTL to get string, manufacture, and boot descriptors + + 0.9.5 (03/14/2000) greg kroah-hartman + more error checking added to SerialOpen to try to fix UHCI open problem + + 0.9.4 (03/09/2000) greg kroah-hartman + added more error checking to handle oops when data is hanging + around and tty is abruptly closed. + + 0.9.3 (03/09/2000) david iacovelli + Add epic support for xon/xoff chars + play with performance + + 0.9.2 (03/08/2000) greg kroah-hartman + changed most "info" calls to "dbg" + implemented flow control properly in the termios call + + 0.9.1 (03/08/2000) david iacovelli + added EPIC support + enabled bootloader update + + 0.9 (03/08/2000) greg kroah-hartman + Release to IO networks. + Integrated changes that David made + made getting urbs for writing SMP safe + + 0.8 (03/07/2000) greg kroah-hartman + Release to IO networks. + Fixed problems that were seen in code by David. + Now both Edgeport/4 and Edgeport/2 works properly. + Changed most of the functions to use port instead of serial. + + 0.7 (02/27/2000) greg kroah-hartman + Milestone 3 release. + Release to IO Networks + ioctl for waiting on line change implemented. + ioctl for getting statistics implemented. + multiport support working. + lsr and msr registers are now handled properly. + change break now hooked up and working. + support for all known Edgeport devices. + + 0.6 (02/22/2000) greg kroah-hartman + Release to IO networks. + CHASE is implemented correctly when port is closed. + SerialOpen now blocks correctly until port is fully opened. + + 0.5 (02/20/2000) greg kroah-hartman + Release to IO networks. + Known problems: + modem status register changes are not sent on to the user + CHASE is not implemented when the port is closed. + + 0.4 (02/16/2000) greg kroah-hartman + Second cut at the CeBit demo. + Doesn't leak memory on every write to the port + Still small leaks on startup. + Added support for Edgeport/2 and Edgeport/8 + + 0.3 (02/15/2000) greg kroah-hartman + CeBit demo release. + Force the line settings to 4800, 8, 1, e for the demo. + Warning! This version leaks memory like crazy! + + 0.2 (01/30/2000) greg kroah-hartman + Milestone 1 release. + Device is found by USB subsystem, enumerated, fimware is downloaded + and the descriptors are printed to the debug log, config is set, and + green light starts to blink. Open port works, and data can be sent + and received at the default settings of the UART. Loopback connector + and debug log confirms this. + + 0.1 (01/23/2000) greg kroah-hartman + Initial release to help IO Networks try to set up their test system. + Edgeport4 is recognized, firmware is downloaded, config is set so + device blinks green light every 3 sec. Port is bound, but opening, + closing, and sending data do not work properly. + + diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 04bfe279d763..dc4c498bd1ed 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -27,225 +27,6 @@ * Networks technical support, or Peter Berger , * or Al Borchers . * - * Version history: - * - * 2003_04_03 al borchers - * - fixed a bug (that shows up with dosemu) where the tty struct is - * used in a callback after it has been freed - * - * 2.3 2002_03_08 greg kroah-hartman - * - fixed bug when multiple devices were attached at the same time. - * - * 2.2 2001_11_14 greg kroah-hartman - * - fixed bug in edge_close that kept the port from being used more - * than once. - * - fixed memory leak on device removal. - * - fixed potential double free of memory when command urb submitting - * failed. - * - other small cleanups when the device is removed - * - * 2.1 2001_07_09 greg kroah-hartman - * - added support for TIOCMBIS and TIOCMBIC. - * - * (04/08/2001) gb - * - Identify version on module load. - * - * 2.0 2001_03_05 greg kroah-hartman - * - reworked entire driver to fit properly in with the other usb-serial - * drivers. Occasional oopses still happen, but it's a good start. - * - * 1.2.3 (02/23/2001) greg kroah-hartman - * - changed device table to work properly for 2.4.x final format. - * - fixed problem with dropping data at high data rates. - * - * 1.2.2 (11/27/2000) greg kroah-hartman - * - cleaned up more NTisms. - * - Added device table for 2.4.0-test11 - * - * 1.2.1 (11/08/2000) greg kroah-hartman - * - Started to clean up NTisms. - * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 - * - * 1.2 (10/17/2000) David Iacovelli - * Remove all EPIC code and GPL source - * Fix RELEVANT_IFLAG macro to include flow control - * changes port configuration changes. - * Fix redefinition of SERIAL_MAGIC - * Change all timeout values to 5 seconds - * Tried to fix the UHCI multiple urb submission, but failed miserably. - * it seems to work fine with OHCI. - * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must - * find a way to work arount this UHCI bug ) - * - * 1.1 (10/11/2000) David Iacovelli - * Fix XON/XOFF flow control to support both IXON and IXOFF - * - * 0.9.27 (06/30/2000) David Iacovelli - * Added transmit queue and now allocate urb for command writes. - * - * 0.9.26 (06/29/2000) David Iacovelli - * Add support for 80251 based edgeport - * - * 0.9.25 (06/27/2000) David Iacovelli - * Do not close the port if it has multiple opens. - * - * 0.9.24 (05/26/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * and first cut at running BlackBox Demo - * - * 0.9.23 (05/24/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * - * 0.9.22 (05/23/2000) David Iacovelli - * fixed bug in enumeration. If epconfig turns on mapping by - * path after a device is already plugged in, we now update - * the mapping correctly - * - * 0.9.21 (05/16/2000) David Iacovelli - * Added BlockUntilChaseResp() to also wait for txcredits - * Updated the way we allocate and handle write URBs - * Add debug code to dump buffers - * - * 0.9.20 (05/01/2000) David Iacovelli - * change driver to use usb/tts/ - * - * 0.9.19 (05/01/2000) David Iacovelli - * Update code to compile if DEBUG is off - * - * 0.9.18 (04/28/2000) David Iacovelli - * cleanup and test tty_register with devfs - * - * 0.9.17 (04/27/2000) greg kroah-hartman - * changed tty_register around to be like the way it - * was before, but now it works properly with devfs. - * - * 0.9.16 (04/26/2000) david iacovelli - * Fixed bug in GetProductInfo() - * - * 0.9.15 (04/25/2000) david iacovelli - * Updated enumeration - * - * 0.9.14 (04/24/2000) david iacovelli - * Removed all config/status IOCTLS and - * converted to using /proc/edgeport - * still playing with devfs - * - * 0.9.13 (04/24/2000) david iacovelli - * Removed configuration based on ttyUSB0 - * Added support for configuration using /prod/edgeport - * first attempt at using devfs (not working yet!) - * Added IOCTL to GetProductInfo() - * Added support for custom baud rates - * Add support for random port numbers - * - * 0.9.12 (04/18/2000) david iacovelli - * added additional configuration IOCTLs - * use ttyUSB0 for configuration - * - * 0.9.11 (04/17/2000) greg kroah-hartman - * fixed module initialization race conditions. - * made all urbs dynamically allocated. - * made driver devfs compatible. now it only registers the tty device - * when the device is actually plugged in. - * - * 0.9.10 (04/13/2000) greg kroah-hartman - * added proc interface framework. - * - * 0.9.9 (04/13/2000) david iacovelli - * added enumeration code and ioctls to configure the device - * - * 0.9.8 (04/12/2000) david iacovelli - * Change interrupt read start when device is plugged in - * and stop when device is removed - * process interrupt reads when all ports are closed - * (keep value of rxBytesAvail consistent with the edgeport) - * set the USB_BULK_QUEUE flag so that we can shove a bunch - * of urbs at once down the pipe - * - * 0.9.7 (04/10/2000) david iacovelli - * start to add enumeration code. - * generate serial number for epic devices - * add support for kdb - * - * 0.9.6 (03/30/2000) david iacovelli - * add IOCTL to get string, manufacture, and boot descriptors - * - * 0.9.5 (03/14/2000) greg kroah-hartman - * more error checking added to SerialOpen to try to fix UHCI open problem - * - * 0.9.4 (03/09/2000) greg kroah-hartman - * added more error checking to handle oops when data is hanging - * around and tty is abruptly closed. - * - * 0.9.3 (03/09/2000) david iacovelli - * Add epic support for xon/xoff chars - * play with performance - * - * 0.9.2 (03/08/2000) greg kroah-hartman - * changed most "info" calls to "dbg" - * implemented flow control properly in the termios call - * - * 0.9.1 (03/08/2000) david iacovelli - * added EPIC support - * enabled bootloader update - * - * 0.9 (03/08/2000) greg kroah-hartman - * Release to IO networks. - * Integrated changes that David made - * made getting urbs for writing SMP safe - * - * 0.8 (03/07/2000) greg kroah-hartman - * Release to IO networks. - * Fixed problems that were seen in code by David. - * Now both Edgeport/4 and Edgeport/2 works properly. - * Changed most of the functions to use port instead of serial. - * - * 0.7 (02/27/2000) greg kroah-hartman - * Milestone 3 release. - * Release to IO Networks - * ioctl for waiting on line change implemented. - * ioctl for getting statistics implemented. - * multiport support working. - * lsr and msr registers are now handled properly. - * change break now hooked up and working. - * support for all known Edgeport devices. - * - * 0.6 (02/22/2000) greg kroah-hartman - * Release to IO networks. - * CHASE is implemented correctly when port is closed. - * SerialOpen now blocks correctly until port is fully opened. - * - * 0.5 (02/20/2000) greg kroah-hartman - * Release to IO networks. - * Known problems: - * modem status register changes are not sent on to the user - * CHASE is not implemented when the port is closed. - * - * 0.4 (02/16/2000) greg kroah-hartman - * Second cut at the CeBit demo. - * Doesn't leak memory on every write to the port - * Still small leaks on startup. - * Added support for Edgeport/2 and Edgeport/8 - * - * 0.3 (02/15/2000) greg kroah-hartman - * CeBit demo release. - * Force the line settings to 4800, 8, 1, e for the demo. - * Warning! This version leaks memory like crazy! - * - * 0.2 (01/30/2000) greg kroah-hartman - * Milestone 1 release. - * Device is found by USB subsystem, enumerated, fimware is downloaded - * and the descriptors are printed to the debug log, config is set, and - * green light starts to blink. Open port works, and data can be sent - * and received at the default settings of the UART. Loopback connector - * and debug log confirms this. - * - * 0.1 (01/23/2000) greg kroah-hartman - * Initial release to help IO Networks try to set up their test system. - * Edgeport4 is recognized, firmware is downloaded, config is set so - * device blinks green light every 3 sec. Port is bound, but opening, - * closing, and sending data do not work properly. - * */ #include diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index beef3c4cee6e..29719ceab19a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -8,31 +8,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * 2002_Mar_26 gkh - * allowed driver to work properly if there is no tty assigned to a port - * (this happens for serial console devices.) - * - * 2001_Oct_06 gkh - * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. - * - * 2001_Sep_19 gkh - * Added break support. - * - * 2001_Aug_30 gkh - * fixed oops in write_bulk_callback. - * - * 2001_Aug_28 gkh - * reworked buffer logic to be like other usb-serial drivers. Hopefully - * removing some reported problems. - * - * 2001_Jun_06 gkh - * finished porting to 2.4 format. - * */ #include diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 08f600327db4..fde09fba8790 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1,7 +1,7 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2000 Peter Berger (pberger@brimson.com) * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) * @@ -9,316 +9,11 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * - * This driver was originally based on the ACM driver by Armin Fuerst (which was + * This driver was originally based on the ACM driver by Armin Fuerst (which was * based on a driver by Brad Keryan) * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (12/10/2002) gkh - * Split the ports off into their own struct device, and added a - * usb-serial bus driver. - * - * (11/19/2002) gkh - * removed a few #ifdefs for the generic code and cleaned up the failure - * logic in initialization. - * - * (10/02/2002) gkh - * moved the console code to console.c and out of this file. - * - * (06/05/2002) gkh - * moved location of startup() call in serial_probe() until after all - * of the port information and endpoints are initialized. This makes - * things easier for some drivers. - * - * (04/10/2002) gkh - * added serial_read_proc function which creates a - * /proc/tty/driver/usb-serial file. - * - * (03/27/2002) gkh - * Got USB serial console code working properly and merged into the main - * version of the tree. Thanks to Randy Dunlap for the initial version - * of this code, and for pushing me to finish it up. - * The USB serial console works with any usb serial driver device. - * - * (03/21/2002) gkh - * Moved all manipulation of port->open_count into the core. Now the - * individual driver's open and close functions are called only when the - * first open() and last close() is called. Making the drivers a bit - * smaller and simpler. - * Fixed a bug if a driver didn't have the owner field set. - * - * (02/26/2002) gkh - * Moved all locking into the main serial_* functions, instead of having - * the individual drivers have to grab the port semaphore. This should - * reduce races. - * Reworked the MOD_INC logic a bit to always increment and decrement, even - * if the generic driver is being used. - * - * (10/10/2001) gkh - * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to - * help prevent child drivers from accessing the device since it is now - * gone. - * - * (09/13/2001) gkh - * Moved generic driver initialize after we have registered with the USB - * core. Thanks to Randy Dunlap for pointing this problem out. - * - * (07/03/2001) gkh - * Fixed module paramater size. Thanks to John Brockmeyer for the pointer. - * Fixed vendor and product getting defined through the MODULE_PARM macro - * if the Generic driver wasn't compiled in. - * Fixed problem with generic_shutdown() not being called for drivers that - * don't have a shutdown() function. - * - * (06/06/2001) gkh - * added evil hack that is needed for the prolific pl2303 device due to the - * crazy way its endpoints are set up. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * 2001_02_05 gkh - * Fixed buffer overflows bug with the generic serial driver. Thanks to - * Todd Squires for fixing this. - * - * (01/10/2001) gkh - * Fixed bug where the generic serial adaptor grabbed _any_ device that was - * offered to it. - * - * (12/12/2000) gkh - * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and - * moved them to the serial_open and serial_close functions. - * Also fixed bug with there not being a MOD_DEC for the generic driver - * (thanks to Gary Brubaker for finding this.) - * - * (11/29/2000) gkh - * Small NULL pointer initialization cleanup which saves a bit of disk image - * - * (11/01/2000) Adam J. Richter - * instead of using idVendor/idProduct pairs, usb serial drivers - * now identify their hardware interest with usb_device_id tables, - * which they usually have anyhow for use with MODULE_DEVICE_TABLE. - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * Added locks for SMP safeness to generic driver - * Fixed the ability to open a generic device's port more than once. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * (07/03/2000) gkh - * Added more debugging to serial_ioctl call - * - * (06/25/2000) gkh - * Changed generic_write_bulk_callback to not call wake_up_interruptible - * directly, but to have port_softint do it at a safer time. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (05/22/2000) gkh - * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be - * removed from the individual device source files. - * - * (05/03/2000) gkh - * Added the Digi Acceleport driver from Al Borchers and Peter Berger. - * - * (05/02/2000) gkh - * Changed devfs and tty register code to work properly now. This was based on - * the ACM driver changes by Vojtech Pavlik. - * - * (04/27/2000) Ryan VanderBijl - * Put calls to *_paranoia_checks into one function. - * - * (04/23/2000) gkh - * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. - * Moved when the startup code printed out the devices that are supported. - * - * (04/19/2000) gkh - * Added driver for ZyXEL omni.net lcd plus ISDN TA - * Made startup info message specify which drivers were compiled in. - * - * (04/03/2000) gkh - * Changed the probe process to remove the module unload races. - * Changed where the tty layer gets initialized to have devfs work nicer. - * Added initial devfs support. - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * - * (03/19/2000) gkh - * Fixed oops that could happen when device was removed while a program - * was talking to the device. - * Removed the static urbs and now all urbs are created and destroyed - * dynamically. - * Reworked the internal interface. Now everything is based on the - * usb_serial_port structure instead of the larger usb_serial structure. - * This fixes the bug that a multiport device could not have more than - * one port open at one time. - * - * (03/17/2000) gkh - * Added config option for debugging messages. - * Added patch for keyspan pda from Brian Warner. - * - * (03/06/2000) gkh - * Added the keyspan pda code from Brian Warner - * Moved a bunch of the port specific stuff into its own structure. This - * is in anticipation of the true multiport devices (there's a bug if you - * try to access more than one port of any multiport device right now) - * - * (02/21/2000) gkh - * Made it so that any serial devices only have to specify which functions - * they want to overload from the generic function calls (great, - * inheritance in C, in a driver, just what I wanted...) - * Added support for set_termios and ioctl function calls. No drivers take - * advantage of this yet. - * Removed the #ifdef MODULE, now there is no module specific code. - * Cleaned up a few comments in usb-serial.h that were wrong (thanks again - * to Miles Lott). - * Small fix to get_free_serial. - * - * (02/14/2000) gkh - * Removed the Belkin and Peracom functionality from the driver due to - * the lack of support from the vendor, and me not wanting people to - * accidenatly buy the device, expecting it to work with Linux. - * Added read_bulk_callback and write_bulk_callback to the type structure - * for the needs of the FTDI and WhiteHEAT driver. - * Changed all reverences to FTDI to FTDI_SIO at the request of Bill - * Ryder. - * Changed the output urb size back to the max endpoint size to make - * the ftdi_sio driver have it easier, and due to the fact that it didn't - * really increase the speed any. - * - * (02/11/2000) gkh - * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a - * patch from Miles Lott (milos@insync.net). - * Fixed bug with not restoring the minor range that a device grabs, if - * the startup function fails (thanks Miles for finding this). - * - * (02/05/2000) gkh - * Added initial framework for the Keyspan PDA serial converter so that - * Brian Warner has a place to put his code. - * Made the ezusb specific functions generic enough that different - * devices can use them (whiteheat and keyspan_pda both need them). - * Split out a whole bunch of structure and other stuff to a separate - * usb-serial.h file. - * Made the Visor connection messages a little more understandable, now - * that Miles Lott (milos@insync.net) has gotten the Generic channel to - * work. Also made them always show up in the log file. - * - * (01/25/2000) gkh - * Added initial framework for FTDI serial converter so that Bill Ryder - * has a place to put his code. - * Added the vendor specific info from Handspring. Now we can print out - * informational debug messages as well as understand what is happening. - * - * (01/23/2000) gkh - * Fixed problem of crash when trying to open a port that didn't have a - * device assigned to it. Made the minor node finding a little smarter, - * now it looks to find a continuous space for the new device. - * - * (01/21/2000) gkh - * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) - * Fixed get_serial_by_minor which was all messed up for multi port - * devices. Fixed multi port problem for generic devices. Now the number - * of ports is determined by the number of bulk out endpoints for the - * generic device. - * - * (01/19/2000) gkh - * Removed lots of cruft that was around from the old (pre urb) driver - * interface. - * Made the serial_table dynamic. This should save lots of memory when - * the number of minor nodes goes up to 256. - * Added initial support for devices that have more than one port. - * Added more debugging comments for the Visor, and added a needed - * set_configuration call. - * - * (01/17/2000) gkh - * Fixed the WhiteHEAT firmware (my processing tool had a bug) - * and added new debug loader firmware for it. - * Removed the put_char function as it isn't really needed. - * Added visor startup commands as found by the Win98 dump. - * - * (01/13/2000) gkh - * Fixed the vendor id for the generic driver to the one I meant it to be. - * - * (01/12/2000) gkh - * Forget the version numbering...that's pretty useless... - * Made the driver able to be compiled so that the user can select which - * converter they want to use. This allows people who only want the Visor - * support to not pay the memory size price of the WhiteHEAT. - * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) - * grabbed the root hub. Not good. - * - * version 0.4.0 (01/10/2000) gkh - * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT - * device. Added startup function to allow firmware to be downloaded to - * a device if it needs to be. - * Added firmware download logic to the WhiteHEAT device. - * Started to add #defines to split up the different drivers for potential - * configuration option. - * - * version 0.3.1 (12/30/99) gkh - * Fixed problems with urb for bulk out. - * Added initial support for multiple sets of endpoints. This enables - * the Handspring Visor to be attached successfully. Only the first - * bulk in / bulk out endpoint pair is being used right now. - * - * version 0.3.0 (12/27/99) gkh - * Added initial support for the Handspring Visor based on a patch from - * Miles Lott (milos@sneety.insync.net) - * Cleaned up the code a bunch and converted over to using urbs only. - * - * version 0.2.3 (12/21/99) gkh - * Added initial support for the Connect Tech WhiteHEAT converter. - * Incremented the number of ports in expectation of getting the - * WhiteHEAT to work properly (4 ports per connection). - * Added notification on insertion and removal of what port the - * device is/was connected to (and what kind of device it was). - * - * version 0.2.2 (12/16/99) gkh - * Changed major number to the new allocated number. We're legal now! - * - * version 0.2.1 (12/14/99) gkh - * Fixed bug that happens when device node is opened when there isn't a - * device attached to it. Thanks to marek@webdesign.no for noticing this. - * - * version 0.2.0 (11/10/99) gkh - * Split up internals to make it easier to add different types of serial - * converters to the code. - * Added a "generic" driver that gets it's vendor and product id - * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) - * for the idea and sample code (from the usb scanner driver.) - * Cleared up any licensing questions by releasing it under the GNU GPL. - * - * version 0.1.2 (10/25/99) gkh - * Fixed bug in detecting device. - * - * version 0.1.1 (10/05/99) gkh - * Changed the major number to not conflict with anything else. - * - * version 0.1 (09/28/99) gkh - * Can recognize the two different devices and start up a read from - * device when asked to. Writes also work. No control signals yet, this - * all is vendor specific data (i.e. no spec), also no control for - * different baud rates or other bit settings. - * Currently we are using the same devid as the acm driver. This needs - * to change. - * */ #include diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 4ca5e0c05611..1cedc1999508 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -1,53 +1,13 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 + * Copyright (C) 1999 - 2005 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * - * (03/26/2002) gkh - * removed the port->tty check from port_paranoia_check() due to serial - * consoles not having a tty device assigned to them. - * - * (12/03/2001) gkh - * removed active from the port structure. - * added documentation to the usb_serial_device_type structure - * - * (10/10/2001) gkh - * added vendor and product to serial structure. Needed to determine device - * owner when the device is disconnected. - * - * (05/30/2001) gkh - * added sem to port structure and removed port_lock - * - * (10/05/2000) gkh - * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help - * fix bug with urb->dev not being set properly, now that the usb core - * needs it. - * - * (09/11/2000) gkh - * Added usb_serial_debug_data function to help get rid of #DEBUG in the - * drivers. - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * - * (08/08/2000) gkh - * Added open_count to port structure. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * */ diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 0ac0377e8683..39ad0cab8635 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -7,139 +7,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (06/03/2003) Judd Montgomery - * Added support for module parameter options for untested/unknown - * devices. - * - * (03/09/2003) gkh - * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl - * for the information. - * - * (03/05/2003) gkh - * Think Treo support is now working. - * - * (04/03/2002) gkh - * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI - * for the information. - * - * (03/27/2002) gkh - * Removed assumptions that port->tty was always valid (is not true - * for usb serial console devices.) - * - * (03/23/2002) gkh - * Added support for the Palm i705 device, thanks to Thomas Riemer - * for the information. - * - * (03/21/2002) gkh - * Added support for the Palm m130 device, thanks to Udo Eisenbarth - * for the information. - * - * (02/27/2002) gkh - * Reworked the urb handling logic. We have no more pool, but dynamically - * allocate the urb and the transfer buffer on the fly. In testing this - * does not incure any measurable overhead. This also relies on the fact - * that we have proper reference counting logic for urbs. - * - * (02/21/2002) SilaS - * Added initial support for the Palm m515 devices. - * - * (02/14/2002) gkh - * Added support for the Clie S-360 device. - * - * (12/18/2001) gkh - * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand - * for the patch. - * - * (11/11/2001) gkh - * Added support for the m125 devices, and added check to prevent oopses - * for Clié devices that lie about the number of ports they have. - * - * (08/30/2001) gkh - * Added support for the Clie devices, both the 3.5 and 4.0 os versions. - * Many thanks to Daniel Burke, and Bryan Payne for helping with this. - * - * (08/23/2001) gkh - * fixed a few potential bugs pointed out by Oliver Neukum. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (05/28/2000) gkh - * Added initial support for the Palm m500 and Palm m505 devices. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (01/21/2000) gkh - * Added write_room and chars_in_buffer, as they were previously using the - * generic driver versions which is all wrong now that we are using an urb - * pool. Thanks to Wolfgang Grandegger for pointing this out to me. - * Removed count assignment in the write function, which was not needed anymore - * either. Thanks to Al Borchers for pointing this out. - * - * (12/12/2000) gkh - * Moved MOD_DEC to end of visor_close to be nicer, as the final write - * message can sleep. - * - * (11/12/2000) gkh - * Fixed bug with data being dropped on the floor by forcing tty->low_latency - * to be on. Hopefully this fixes the OHCI issue! - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Got rid of always calling kmalloc for every urb we wrote out to the - * device. - * Added visor_read_callback so we can keep track of bytes in and out for - * those people who like to know the speed of their device. - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (09/06/2000) gkh - * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ - * the host controller drivers set urb->dev = NULL when the urb is finished. - * - * (08/28/2000) gkh - * Added locks for SMP safeness. - * - * (08/08/2000) gkh - * Fixed endian problem in visor_startup. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - * than once. - * - * (07/23/2000) gkh - * Added pool of write urbs to speed up transfers to the visor. - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * - * (07/03/2000) gkh - * Added visor_set_ioctl and visor_set_termios functions (they don't do much - * of anything, but are good for debugging.) - * - * (06/25/2000) gkh - * Fixed bug in visor_unthrottle that should help with the disconnect in PPP - * bug that people have been reporting. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (04/27/2000) Ryan VanderBijl - * Fixed memory leak in visor_close - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * */ #include -- GitLab From 269bda1c123c7caf88e1deb2264f9086f0344192 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0823/1519] [PATCH] USB Serial: move name to driver structure This fixes up a lot of problems in sysfs with some of the usb serial drivers, they had incorrect driver names. Also saves a tiny ammount of memory. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 2 +- drivers/usb/serial/belkin_sa.c | 4 ++-- drivers/usb/serial/bus.c | 8 ++----- drivers/usb/serial/cp2101.c | 4 ++-- drivers/usb/serial/cyberjack.c | 4 ++-- drivers/usb/serial/cypress_m8.c | 8 +++---- drivers/usb/serial/digi_acceleport.c | 12 +++++------ drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 4 ++-- drivers/usb/serial/garmin_gps.c | 4 ++-- drivers/usb/serial/generic.c | 3 +-- drivers/usb/serial/hp4x.c | 4 ++-- drivers/usb/serial/io_tables.h | 12 +++++------ drivers/usb/serial/io_ti.c | 12 +++++------ drivers/usb/serial/ipaq.c | 3 ++- drivers/usb/serial/ipw.c | 4 ++-- drivers/usb/serial/ir-usb.c | 3 ++- drivers/usb/serial/keyspan.h | 16 +++++++------- drivers/usb/serial/keyspan_pda.c | 12 +++++------ drivers/usb/serial/kl5kusb105.c | 4 ++-- drivers/usb/serial/kobil_sct.c | 3 ++- drivers/usb/serial/mct_u232.c | 4 ++-- drivers/usb/serial/omninet.c | 4 ++-- drivers/usb/serial/option.c | 4 ++-- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 10 +++++---- drivers/usb/serial/usb-serial.c | 15 ++++++++------ drivers/usb/serial/usb-serial.h | 12 +++++------ drivers/usb/serial/visor.c | 18 ++++++++-------- drivers/usb/serial/whiteheat.c | 30 +++++++++++++-------------- 31 files changed, 115 insertions(+), 114 deletions(-) diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index fbc5b9b44749..1f29d8837327 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -33,8 +33,8 @@ static struct usb_driver airprime_driver = { static struct usb_serial_driver airprime_device = { .driver = { .owner = THIS_MODULE, + .name = "airprime", }, - .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 4878961a0900..84bc0ee4f061 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -124,9 +124,9 @@ static struct usb_driver belkin_driver = { static struct usb_serial_driver belkin_device = { .driver = { .owner = THIS_MODULE, + .name = "belkin", }, - .name = "Belkin / Peracom / GoHubs USB Serial Adapter", - .short_name = "belkin", + .description = "Belkin / Peracom / GoHubs USB Serial Adapter", .id_table = id_table_combined, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index b8364a8de7df..664139afcfa9 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -72,7 +72,7 @@ static int usb_serial_device_probe (struct device *dev) tty_register_device (usb_serial_tty_driver, minor, dev); dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", - driver->name, minor); + driver->description, minor); exit: return retval; @@ -104,7 +104,7 @@ static int usb_serial_device_remove (struct device *dev) minor = port->number; tty_unregister_device (usb_serial_tty_driver, minor); dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", - driver->name, minor); + driver->description, minor); return retval; } @@ -113,10 +113,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) { int retval; - if (driver->short_name) - driver->driver.name = (char *)driver->short_name; - else - driver->driver.name = (char *)driver->name; driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 81dd720a122b..c5334dd89b12 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,7 +67,7 @@ MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cp2101_driver = { .owner = THIS_MODULE, - .name = "CP2101", + .name = "cp2101", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, @@ -76,8 +76,8 @@ static struct usb_driver cp2101_driver = { static struct usb_serial_driver cp2101_device = { .driver = { .owner = THIS_MODULE, + .name = "cp2101", }, - .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 3441bad74f7b..e581e4ae8483 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -86,9 +86,9 @@ static struct usb_driver cyberjack_driver = { static struct usb_serial_driver cyberjack_device = { .driver = { .owner = THIS_MODULE, + .name = "cyberjack", }, - .name = "Reiner SCT Cyberjack USB card reader", - .short_name = "cyberjack", + .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index b4069af4d565..af9290ed257b 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -179,9 +179,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { .driver = { .owner = THIS_MODULE, + .name = "earthmate", }, - .name = "DeLorme Earthmate USB", - .short_name = "earthmate", + .description = "DeLorme Earthmate USB", .id_table = id_table_earthmate, .num_interrupt_in = 1, .num_interrupt_out = 1, @@ -208,9 +208,9 @@ static struct usb_serial_driver cypress_earthmate_device = { static struct usb_serial_driver cypress_hidcom_device = { .driver = { .owner = THIS_MODULE, + .name = "cyphidcom", }, - .name = "HID->COM RS232 Adapter", - .short_name = "cyphidcom", + .description = "HID->COM RS232 Adapter", .id_table = id_table_cyphidcomrs232, .num_interrupt_in = 1, .num_interrupt_out = 1, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index be9b495d2491..dc74644a603d 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -505,10 +505,10 @@ static struct usb_driver digi_driver = { static struct usb_serial_driver digi_acceleport_2_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "digi_2", }, - .name = "Digi 2 port USB adapter", - .short_name = "digi_2", + .description = "Digi 2 port USB adapter", .id_table = id_table_2, .num_interrupt_in = 0, .num_bulk_in = 4, @@ -534,10 +534,10 @@ static struct usb_serial_driver digi_acceleport_2_device = { static struct usb_serial_driver digi_acceleport_4_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "digi_4", }, - .name = "Digi 4 port USB adapter", - .short_name = "digi_4", + .description = "Digi 4 port USB adapter", .id_table = id_table_4, .num_interrupt_in = 0, .num_bulk_in = 5, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 3e6c4ba7667b..0b0546dcc7b9 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -115,8 +115,8 @@ static struct usb_driver empeg_driver = { static struct usb_serial_driver empeg_device = { .driver = { .owner = THIS_MODULE, + .name = "empeg", }, - .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9d945de0acac..77d54ac39a0e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -565,9 +565,9 @@ static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { .driver = { .owner = THIS_MODULE, + .name = "ftdi_sio", }, - .name = "FTDI USB Serial Device", - .short_name = "ftdi_sio", + .description = "FTDI USB Serial Device", .id_table = id_table_combined, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 3fd98c00cd6a..35820bda7ae1 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1472,9 +1472,9 @@ static void garmin_shutdown (struct usb_serial *serial) static struct usb_serial_driver garmin_device = { .driver = { .owner = THIS_MODULE, + .name = "garmin_gps", }, - .name = "Garmin GPS usb/tty", - .short_name = "garmin_gps", + .description = "Garmin GPS usb/tty", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 779bea0c6242..8909208f506a 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -39,9 +39,8 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ struct usb_serial_driver usb_serial_generic_device = { .driver = { .owner = THIS_MODULE, + .name = "generic", }, - .name = "Generic", - .short_name = "generic", .id_table = generic_device_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 4f3cbc08c4ee..8eadfb705601 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -38,7 +38,7 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { .owner = THIS_MODULE, - .name = "HP4X", + .name = "hp4X", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, @@ -47,8 +47,8 @@ static struct usb_driver hp49gp_driver = { static struct usb_serial_driver hp49gp_device = { .driver = { .owner = THIS_MODULE, + .name = "hp4X", }, - .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 28fb0d42a166..fad561c04c76 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -78,9 +78,9 @@ MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_2", }, - .name = "Edgeport 2 port adapter", - .short_name = "edgeport_2", + .description = "Edgeport 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -108,9 +108,9 @@ static struct usb_serial_driver edgeport_2port_device = { static struct usb_serial_driver edgeport_4port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_4", }, - .name = "Edgeport 4 port adapter", - .short_name = "edgeport_4", + .description = "Edgeport 4 port adapter", .id_table = edgeport_4port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -138,9 +138,9 @@ static struct usb_serial_driver edgeport_4port_device = { static struct usb_serial_driver edgeport_8port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_8", }, - .name = "Edgeport 8 port adapter", - .short_name = "edgeport_8", + .description = "Edgeport 8 port adapter", .id_table = edgeport_8port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 74228a072643..832b6d6734c0 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2984,10 +2984,10 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "edgeport_ti_1", }, - .name = "Edgeport TI 1 port adapter", - .short_name = "edgeport_ti_1", + .description = "Edgeport TI 1 port adapter", .id_table = edgeport_1port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -3014,10 +3014,10 @@ static struct usb_serial_driver edgeport_1port_device = { static struct usb_serial_driver edgeport_2port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "edgeport_ti_2", }, - .name = "Edgeport TI 2 port adapter", - .short_name = "edgeport_ti_2", + .description = "Edgeport TI 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9aedfb91b20c..1abaebe6dbc1 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -550,8 +550,9 @@ static struct usb_driver ipaq_driver = { static struct usb_serial_driver ipaq_device = { .driver = { .owner = THIS_MODULE, + .name = "ipaq", }, - .name = "PocketPC PDA", + .description = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 2ba69623ac05..a02fada85362 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -446,9 +446,9 @@ static int ipw_disconnect(struct usb_serial_port *port) static struct usb_serial_driver ipw_device = { .driver = { .owner = THIS_MODULE, + .name = "ipw", }, - .name = "IPWireless converter", - .short_name = "ipw", + .description = "IPWireless converter", .id_table = usb_ipw_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index bf079059819e..19f329e9bdcf 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -136,8 +136,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { .driver = { .owner = THIS_MODULE, + .name = "ir-usb", }, - .name = "IR Dongle", + .description = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 124d46e76a2e..5cfc13b5e56f 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -573,9 +573,9 @@ static struct usb_device_id keyspan_4port_ids[] = { static struct usb_serial_driver keyspan_pre_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_no_firm", }, - .name = "Keyspan - (without firmware)", - .short_name = "keyspan_no_firm", + .description = "Keyspan - (without firmware)", .id_table = keyspan_pre_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -587,9 +587,9 @@ static struct usb_serial_driver keyspan_pre_device = { static struct usb_serial_driver keyspan_1port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_1", }, - .name = "Keyspan 1 port adapter", - .short_name = "keyspan_1", + .description = "Keyspan 1 port adapter", .id_table = keyspan_1port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -614,9 +614,9 @@ static struct usb_serial_driver keyspan_1port_device = { static struct usb_serial_driver keyspan_2port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_2", }, - .name = "Keyspan 2 port adapter", - .short_name = "keyspan_2", + .description = "Keyspan 2 port adapter", .id_table = keyspan_2port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -641,9 +641,9 @@ static struct usb_serial_driver keyspan_2port_device = { static struct usb_serial_driver keyspan_4port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_4", }, - .name = "Keyspan 4 port adapter", - .short_name = "keyspan_4", + .description = "Keyspan 4 port adapter", .id_table = keyspan_4port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 5, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 389b7833e3ae..cd4f48bd83b6 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -786,9 +786,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) static struct usb_serial_driver keyspan_pda_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_pda_pre", }, - .name = "Keyspan PDA - (prerenumeration)", - .short_name = "keyspan_pda_pre", + .description = "Keyspan PDA - (prerenumeration)", .id_table = id_table_fake, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -802,9 +802,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { static struct usb_serial_driver xircom_pgs_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "xircom_no_firm", }, - .name = "Xircom / Entregra PGS - (prerenumeration)", - .short_name = "xircom_no_firm", + .description = "Xircom / Entregra PGS - (prerenumeration)", .id_table = id_table_fake_xircom, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -817,9 +817,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { static struct usb_serial_driver keyspan_pda_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_pda", }, - .name = "Keyspan PDA", - .short_name = "keyspan_pda", + .description = "Keyspan PDA", .id_table = id_table_std, .num_interrupt_in = 1, .num_bulk_in = 0, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 586108ce7897..a8951c0fd020 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -126,9 +126,9 @@ static struct usb_driver kl5kusb105d_driver = { static struct usb_serial_driver kl5kusb105d_device = { .driver = { .owner = THIS_MODULE, + .name = "kl5kusb105d", }, - .name = "KL5KUSB105D / PalmConnect", - .short_name = "kl5kusb105d", + .description = "KL5KUSB105D / PalmConnect", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index a9578e05b22f..9456dd9dd136 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -108,8 +108,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { .driver = { .owner = THIS_MODULE, + .name = "kobil", }, - .name = "KOBIL USB smart card terminal", + .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 0, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 7dcf91c5f83d..ca5dbadb9b7e 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -135,9 +135,9 @@ static struct usb_driver mct_u232_driver = { static struct usb_serial_driver mct_u232_device = { .driver = { .owner = THIS_MODULE, + .name = "mct_u232", }, - .name = "MCT U232", - .short_name = "mct_u232", + .description = "MCT U232", .id_table = id_table_combined, .num_interrupt_in = 2, .num_bulk_in = 0, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index f6327cc1b2e7..3caf97072ac0 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -91,9 +91,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { .driver = { .owner = THIS_MODULE, + .name = "omninet", }, - .name = "ZyXEL - omni.net lcd plus usb", - .short_name = "omninet", + .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a2b5adf34868..7716000045b7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -108,9 +108,9 @@ static struct usb_driver option_driver = { static struct usb_serial_driver option_3port_device = { .driver = { .owner = THIS_MODULE, + .name = "option", }, - .name = "Option 3G data card", - .short_name = "option", + .description = "Option 3G data card", .id_table = option_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 29719ceab19a..f8f4e93e8c0b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -157,8 +157,8 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, static struct usb_serial_driver pl2303_device = { .driver = { .owner = THIS_MODULE, + .name = "pl2303", }, - .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 42a86ab689f4..c22bdc0c4dfd 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -400,8 +400,8 @@ static int safe_startup (struct usb_serial *serial) static struct usb_serial_driver safe_device = { .driver = { .owner = THIS_MODULE, + .name = "safe_serial", }, - .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index eab8a6de0925..205dbf7201da 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -257,9 +257,10 @@ static struct usb_driver ti_usb_driver = { static struct usb_serial_driver ti_1port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_1", }, - .name = "TI USB 3410 1 port adapter", + .description = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -286,9 +287,10 @@ static struct usb_serial_driver ti_1port_device = { static struct usb_serial_driver ti_2port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_2", }, - .name = "TI USB 5052 2 port adapter", + .description = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index fde09fba8790..13f6592be685 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -122,7 +122,7 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg ("%s - %s", __FUNCTION__, serial->type->name); + dbg("%s - %s", __FUNCTION__, serial->type->description); serial->type->shutdown(serial); @@ -415,7 +415,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int length += sprintf (page+length, "%d:", i); if (serial->type->driver.owner) length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); - length += sprintf (page+length, " name:\"%s\"", serial->type->name); + length += sprintf (page+length, " name:\"%s\"", serial->type->description); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), le16_to_cpu(serial->dev->descriptor.idProduct)); @@ -687,7 +687,7 @@ int usb_serial_probe(struct usb_interface *interface, #endif /* found all that we need */ - dev_info(&interface->dev, "%s converter detected\n", type->name); + dev_info(&interface->dev, "%s converter detected\n", type->description); #ifdef CONFIG_USB_SERIAL_GENERIC if (type == &usb_serial_generic_device) { @@ -1088,16 +1088,19 @@ int usb_serial_register(struct usb_serial_driver *driver) fixup_generic(driver); + if (!driver->description) + driver->description = driver->driver.name; + /* Add this device to our list of devices */ list_add(&driver->driver_list, &usb_serial_driver_list); retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, driver->name); + err("problem %d when registering driver %s", retval, driver->description); list_del(&driver->driver_list); } else - info("USB Serial support registered for %s", driver->name); + info("USB Serial support registered for %s", driver->description); return retval; } @@ -1105,7 +1108,7 @@ int usb_serial_register(struct usb_serial_driver *driver) void usb_serial_deregister(struct usb_serial_driver *device) { - info("USB Serial deregistering driver %s", device->name); + info("USB Serial deregistering driver %s", device->description); list_del(&device->driver_list); usb_serial_bus_deregister(device); } diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 1cedc1999508..238a5a871ed6 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -149,11 +149,8 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @name: pointer to a string that describes this driver. This string used + * @description: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. - * @short_name: a pointer to a string that describes this driver in - * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface - * to describe the driver. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_interrupt_in: the number of interrupt in endpoints this device will @@ -187,11 +184,12 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * called, the generic serial function will be used instead. * * The driver.owner field should be set to the module owner of this driver. - * + * The driver.name field should be set to the name of this driver (remember + * it will show up in sysfs, so it needs to be short and to the point. + * Useing the module name is a good idea.) */ struct usb_serial_driver { - char *name; - char *short_name; + const char *description; const struct usb_device_id *id_table; char num_interrupt_in; char num_interrupt_out; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 39ad0cab8635..baa2acb28bd8 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -185,9 +185,9 @@ static struct usb_driver visor_driver = { static struct usb_serial_driver handspring_device = { .driver = { .owner = THIS_MODULE, + .name = "visor", }, - .name = "Handspring Visor / Palm OS", - .short_name = "visor", + .description = "Handspring Visor / Palm OS", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -215,9 +215,9 @@ static struct usb_serial_driver handspring_device = { static struct usb_serial_driver clie_5_device = { .driver = { .owner = THIS_MODULE, + .name = "clie_5", }, - .name = "Sony Clie 5.0", - .short_name = "clie_5", + .description = "Sony Clie 5.0", .id_table = clie_id_5_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -245,9 +245,9 @@ static struct usb_serial_driver clie_5_device = { static struct usb_serial_driver clie_3_5_device = { .driver = { .owner = THIS_MODULE, + .name = "clie_3.5", }, - .name = "Sony Clie 3.5", - .short_name = "clie_3.5", + .description = "Sony Clie 3.5", .id_table = clie_id_3_5_table, .num_interrupt_in = 0, .num_bulk_in = 1, @@ -659,7 +659,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i break; } dev_info(dev, "%s: port %d, is for %s use\n", - serial->type->name, + serial->type->description, connection_info->connections[i].port, string); } } @@ -668,11 +668,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i */ if (num_ports == 0 || num_ports > 2) { dev_warn (dev, "%s: No valid connect info available\n", - serial->type->name); + serial->type->description); num_ports = 2; } - dev_info(dev, "%s: Number of ports: %d\n", serial->type->name, + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, num_ports); /* diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index fb95a34a1cf7..18c3183be769 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -159,9 +159,9 @@ static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "whiteheatnofirm", }, - .name = "Connect Tech - WhiteHEAT - (prerenumeration)", - .short_name = "whiteheatnofirm", + .description = "Connect Tech - WhiteHEAT - (prerenumeration)", .id_table = id_table_prerenumeration, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -174,9 +174,9 @@ static struct usb_serial_driver whiteheat_fake_device = { static struct usb_serial_driver whiteheat_device = { .driver = { .owner = THIS_MODULE, + .name = "whiteheat", }, - .name = "Connect Tech - WhiteHEAT", - .short_name = "whiteheat", + .description = "Connect Tech - WhiteHEAT", .id_table = id_table_std, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -386,10 +386,10 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", serial->type->name, ret); + err("%s: Couldn't send command [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(command)) { - err("%s: Send command incomplete [%d]", serial->type->name, alen); + err("%s: Send command incomplete [%d]", serial->type->description, alen); goto no_firmware; } @@ -398,19 +398,19 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", serial->type->name, ret); + err("%s: Couldn't get results [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(result)) { - err("%s: Get results incomplete [%d]", serial->type->name, alen); + err("%s: Get results incomplete [%d]", serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", serial->type->name, result[0]); + err("%s: Command failed [%d]", serial->type->description, result[0]); goto no_firmware; } hw_info = (struct whiteheat_hw_info *)&result[1]; - info("%s: Driver %s: Firmware v%d.%02d", serial->type->name, + info("%s: Driver %s: Firmware v%d.%02d", serial->type->description, DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); for (i = 0; i < serial->num_ports; i++) { @@ -418,7 +418,7 @@ static int whiteheat_attach (struct usb_serial *serial) info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); if (info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_private; } @@ -488,7 +488,7 @@ static int whiteheat_attach (struct usb_serial *serial) command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (command_info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_command_private; } @@ -505,9 +505,9 @@ static int whiteheat_attach (struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name); - err("%s: If the firmware is not running (status led not blinking)\n", serial->type->name); - err("%s: please contact support@connecttech.com\n", serial->type->name); + err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); + err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); + err("%s: please contact support@connecttech.com\n", serial->type->description); return -ENODEV; no_command_private: -- GitLab From 17a882fc0c91477b2582a6dfd4ca93ae7eb58cd3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0824/1519] [PATCH] USB Serial: remove driver version from a few drivers These numbers are pointless, as they have not been changed in _years_, so we should just remove them to stop pretending there is an actual "version number" for these drivers. This should also help reduce confusion when people try to ask for support of a specific driver version, as there has been no way to tell what they are talking about. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 4 +--- drivers/usb/serial/usb-serial.c | 6 ++---- drivers/usb/serial/visor.c | 3 +-- 3 files changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index f8f4e93e8c0b..165c119bf10e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -34,7 +34,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.12" #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" static int debug; @@ -1176,7 +1175,7 @@ static int __init pl2303_init (void) retval = usb_register(&pl2303_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: usb_serial_deregister(&pl2303_device); @@ -1196,7 +1195,6 @@ module_init(pl2303_init); module_exit(pl2303_exit); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 13f6592be685..0c4881d18cd5 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -37,7 +37,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" @@ -406,7 +405,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int char tmp[40]; dbg("%s", __FUNCTION__); - length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION); + length += sprintf (page, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { serial = usb_serial_get_by_index(i); if (serial == NULL) @@ -1025,7 +1024,7 @@ static int __init usb_serial_init(void) goto exit_generic; } - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return result; @@ -1127,7 +1126,6 @@ EXPORT_SYMBOL_GPL(usb_serial_port_softint); /* Module information */ MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_VERSION( DRIVER_VERSION ); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index baa2acb28bd8..a473c1c34559 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -32,7 +32,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.1" #define DRIVER_AUTHOR "Greg Kroah-Hartman " #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" @@ -1002,7 +1001,7 @@ static int __init visor_init (void) retval = usb_register(&visor_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: -- GitLab From 7521803dcc0137668bb30483383092a647671d8b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0825/1519] [PATCH] USB: always export interface information for modalias This fixes a problem with some cdc acm devices that were not getting automatically loaded as the module alias was not being reported properly. This check was for back in the days when we only reported hotplug events for the main usb device, not the interfaces. We should always give the interface information for MODALIAS/modalias as it can be needed. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 35 +++++++++------------- drivers/usb/core/usb.c | 63 +++++++++++++++------------------------- 2 files changed, 37 insertions(+), 61 deletions(-) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index eae413bf8c2a..4bdbc9df6e03 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -462,30 +462,23 @@ static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, { struct usb_interface *intf; struct usb_device *udev; - int len; + struct usb_host_interface *alt; intf = to_usb_interface(dev); udev = interface_to_usbdev(intf); - - len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct), - le16_to_cpu(udev->descriptor.bcdDevice), - udev->descriptor.bDeviceClass, - udev->descriptor.bDeviceSubClass, - udev->descriptor.bDeviceProtocol); - buf += len; - - if (udev->descriptor.bDeviceClass == 0) { - struct usb_host_interface *alt = intf->cur_altsetting; - - return len + sprintf(buf, "%02Xisc%02Xip%02X\n", - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol); - } else { - return len + sprintf(buf, "*isc*ip*\n"); - } + alt = intf->cur_altsetting; + + return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X" + "ic%02Xisc%02Xip%02X\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + le16_to_cpu(udev->descriptor.bcdDevice), + udev->descriptor.bDeviceClass, + udev->descriptor.bDeviceSubClass, + udev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol); } static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 2493e7d9f5b3..4eca4904938f 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -569,6 +569,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, { struct usb_interface *intf; struct usb_device *usb_dev; + struct usb_host_interface *alt; int i = 0; int length = 0; @@ -585,7 +586,8 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, intf = to_usb_interface(dev); usb_dev = interface_to_usbdev (intf); - + alt = intf->cur_altsetting; + if (usb_dev->devnum < 0) { pr_debug ("usb %s: already deleted?\n", dev->bus_id); return -ENODEV; @@ -627,46 +629,27 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, usb_dev->descriptor.bDeviceProtocol)) return -ENOMEM; - if (usb_dev->descriptor.bDeviceClass == 0) { - struct usb_host_interface *alt = intf->cur_altsetting; + if (add_hotplug_env_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "INTERFACE=%d/%d/%d", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; - /* 2.4 only exposed interface zero. in 2.5, hotplug - * agents are called for all interfaces, and can use - * $DEVPATH/bInterfaceNumber if necessary. - */ - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "INTERFACE=%d/%d/%d", - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) - return -ENOMEM; - - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice), - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol, - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) - return -ENOMEM; - } else { - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice), - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol)) - return -ENOMEM; - } + if (add_hotplug_env_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice), + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; envp[i] = NULL; -- GitLab From dcab4eaf77ccd8779c715da3c5db0a82874fa645 Mon Sep 17 00:00:00 2001 From: Simeon Simeonov Date: Wed, 19 Oct 2005 11:32:14 -0400 Subject: [PATCH 0826/1519] [PATCH] USB: storage patch for LEICA camera On Tue, 18 Oct 2005, Simeon Simeonov wrote: > Attached is a patch that solves mounting problems for > LEICA D-LUX camera with FC4 2.6.13 kernel. > > Let me know if you have some questions. Looks okay to me. Given that the previous entry uses the full 0000 - 9999 range, I guess this one can also. The vendor name is a little odd (it will give us three different vendor names all in entries with the same vendor ID) but that doesn't really matter either. Signed-off-by: Alan Stern Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a11701840262..d0f6a7e2fe31 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -251,6 +251,13 @@ UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), +/* Reported by Simeon Simeonov */ +UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999, + "LEICA", + "D-LUX Camera", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ), + /* Most of the following entries were developed with the help of * Shuttle/SCM directly. */ -- GitLab From 61eded6e06a1f4bdbf707b69da904ba9f3eb2f0a Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 24 Oct 2005 22:37:20 +0200 Subject: [PATCH 0827/1519] [PATCH] USB: microtek patch to use kzalloc here is another one to use kzalloc. Please apply. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/image/microtek.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index c84e1486054f..c89d0769b3da 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -773,11 +773,10 @@ static int mts_usb_probe(struct usb_interface *intf, } - new_desc = kmalloc(sizeof(struct mts_desc), GFP_KERNEL); + new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL); if (!new_desc) goto out; - memset(new_desc, 0, sizeof(*new_desc)); new_desc->urb = usb_alloc_urb(0, GFP_KERNEL); if (!new_desc->urb) goto out_kfree; -- GitLab From f2d45cd976682a3566c8cf30cefe91eb43ab6005 Mon Sep 17 00:00:00 2001 From: Guillaume GOURAT / Date: Fri, 21 Oct 2005 14:01:35 +0200 Subject: [PATCH 0828/1519] [PATCH] USB: Kaweth.c udelay patch On some arch (like arm) udelay cannot be called with value greater that 2000. Signed-off-by: Guillaume GOURAT / guillaume.gourat@nexvision.fr Signed-off-by: Oliver Neukum --- drivers/usb/net/kaweth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index c82655d3d448..6bef1be6b36c 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -469,7 +469,7 @@ static int kaweth_reset(struct kaweth_device *kaweth) 0, KAWETH_CONTROL_TIMEOUT); - udelay(10000); + mdelay(10); kaweth_dbg("kaweth_reset() returns %d.",result); -- GitLab From eb3c5ed8617d0aa67648cb7d1a486d14099129f2 Mon Sep 17 00:00:00 2001 From: David Eriksson Date: Tue, 18 Oct 2005 20:12:24 +0200 Subject: [PATCH 0829/1519] [PATCH] USB: Improving the set of vendor/product IDs in the ipaq driver This is a patch improving the set of vendor/product IDs used in the "ipaq" USB serial device driver. The patch size is because I sorted the ids this time, forgot about that last time. Changes: - Added vendor/product identifiers for Psion Teklogix devices - Restored Microsoft's identifier pair 045e/00ce - Sorted list of vendor/product identifiers Signed-off-by: David Eriksson Signed-off-by: Ganesh Varadarajan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ipaq.c | 238 +++++++++++++++++++------------------- 1 file changed, 121 insertions(+), 117 deletions(-) diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 1abaebe6dbc1..d5d066488100 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -92,24 +92,7 @@ static void ipaq_destroy_lists(struct usb_serial_port *port); static struct usb_device_id ipaq_id_table [] = { /* The first entry is a placeholder for the insmod-specified device */ { USB_DEVICE(0x049F, 0x0003) }, - { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ - { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ - { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ - { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ - { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ - { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ - { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ - { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ - { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ - { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */ { USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */ { USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */ @@ -125,7 +108,13 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */ { USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */ { USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */ - { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ + { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ + { USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */ { USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */ { USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */ { USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */ @@ -251,17 +240,81 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */ { USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */ { USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */ - { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ - { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ - { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ + { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ + { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ + { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ + { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ + { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ + { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ + { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ + { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ + { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ + { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ + { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ + { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ + { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ + { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ + { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ + { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ + { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ + { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ + { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ + { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ + { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ + { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ + { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ + { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ + { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ + { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ + { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ + { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ + { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ + { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ + { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ + { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ { USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */ { USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */ + { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ { USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */ { USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */ - { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ { USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */ { USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */ { USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */ + { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ + { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ + { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ + { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ + { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ + { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ + { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ { USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */ @@ -422,116 +475,67 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */ { USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */ { USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */ - { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ - { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ { USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */ - { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ - { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ - { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ - { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */ - { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ - { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ - { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ + { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ + { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ + { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */ { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */ { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */ { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */ - { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ - { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ - { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ - { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ - { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ - { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ - { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ - { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ - { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ - { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ - { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ - { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ - { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ - { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ - { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ - { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ - { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */ + { USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */ + { USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */ + { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ + { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ + { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ + { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ + { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ + { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ + { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ + { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ + { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */ { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */ - { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ - { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */ - { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */ - { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ + { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ + { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ + { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ + { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */ + { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ + { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */ - { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ - { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ - { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ - { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ - { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ - { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ - { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ - { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ - { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ - { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ - { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ - { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ - { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ - { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ - { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ - { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ - { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ - { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ - { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ - { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ - { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ - { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ - { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ - { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ - { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ - { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ - { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ - { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ - { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ - { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ - { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ - { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ - { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ - { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ - { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ - { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ { } /* Terminating entry */ }; -- GitLab From 46f116eab81b21c6ae8c4f169498c632b1f94bf1 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 24 Oct 2005 22:42:35 +0200 Subject: [PATCH 0830/1519] [PATCH] USB: cdc-acm patch to use kzalloc another one to use kzalloc. Please apply. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 16ecad30e29c..1b4751412970 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -827,11 +827,10 @@ static int acm_probe (struct usb_interface *intf, return -ENODEV; } - if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (acm kmalloc)\n"); + if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) { + dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n"); goto alloc_fail; } - memset(acm, 0, sizeof(struct acm)); ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); readsize = le16_to_cpu(epread->wMaxPacketSize); -- GitLab From 478a3bab8c87a9ba4a4ba338314e32bb0c378e62 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 19 Oct 2005 12:52:02 -0400 Subject: [PATCH 0831/1519] [PATCH] USB: Always do usb-handoff This revised patch (as586b) makes usb-handoff permanently true and no longer a kernel boot parameter. It also removes the piix3_usb quirk code; that was nothing more than an early version of the USB handoff code (written at a time when Intel's PIIX3 was about the only motherboard with USB support). And it adds identifiers for the three PCI USB controller classes to pci_ids.h. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 2 - drivers/usb/host/pci-quirks.c | 46 ++------------------- include/asm-i386/mach-summit/mach_mpparse.h | 3 -- include/linux/pci_ids.h | 3 ++ 4 files changed, 6 insertions(+), 48 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 971589a9752d..90766b75d1b7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1517,8 +1517,6 @@ running once the system is up. uart6850= [HW,OSS] Format: , - usb-handoff [HW] Enable early USB BIOS -> OS handoff - usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index f7411ca48835..b7fd3f644e1e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -23,33 +23,6 @@ #include -/* - * PIIX3 USB: We have to disable USB interrupts that are - * hardwired to PIRQD# and may be shared with an - * external device. - * - * Legacy Support Register (LEGSUP): - * bit13: USB PIRQ Enable (USBPIRQDEN), - * bit4: Trap/SMI On IRQ Enable (USBSMIEN). - * - * We mask out all r/wc bits, too. - */ -static void __devinit quirk_piix3_usb(struct pci_dev *dev) -{ - u16 legsup; - - pci_read_config_word(dev, 0xc0, &legsup); - legsup &= 0x50ef; - pci_write_config_word(dev, 0xc0, legsup); -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb ); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb ); - - -/* FIXME these should be the guts of hcd->reset() methods; resolve all - * the differences between this version and the HCD's version. - */ - #define UHCI_USBLEGSUP 0xc0 /* legacy support */ #define UHCI_USBCMD 0 /* command register */ #define UHCI_USBINTR 4 /* interrupt register */ @@ -83,13 +56,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, qui #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ -int usb_early_handoff __devinitdata = 0; -static int __init usb_handoff_early(char *str) -{ - usb_early_handoff = 1; - return 0; -} -__setup("usb-handoff", usb_handoff_early); /* * Make sure the controller is completely inactive, unable to @@ -320,17 +286,11 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) { - if (!usb_early_handoff) - return; - - if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */ + if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) quirk_usb_handoff_uhci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */ + else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI) quirk_usb_handoff_ohci(pdev); - } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */ + else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI) quirk_usb_disable_ehci(pdev); - } - - return; } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); diff --git a/include/asm-i386/mach-summit/mach_mpparse.h b/include/asm-i386/mach-summit/mach_mpparse.h index 2b9e6d55bef1..1cce2b924a80 100644 --- a/include/asm-i386/mach-summit/mach_mpparse.h +++ b/include/asm-i386/mach-summit/mach_mpparse.h @@ -22,7 +22,6 @@ static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, { } -extern int usb_early_handoff; static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid) { @@ -32,7 +31,6 @@ static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, || !strncmp(productid, "RUTHLESS SMP", 12))){ use_cyclone = 1; /*enable cyclone-timer*/ setup_summit(); - usb_early_handoff = 1; return 1; } return 0; @@ -46,7 +44,6 @@ static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) || !strncmp(oem_table_id, "EXA", 3))){ use_cyclone = 1; /*enable cyclone-timer*/ setup_summit(); - usb_early_handoff = 1; return 1; } return 0; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 7d300f7469e3..467a096c3b81 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -96,6 +96,9 @@ #define PCI_CLASS_SERIAL_ACCESS 0x0c01 #define PCI_CLASS_SERIAL_SSA 0x0c02 #define PCI_CLASS_SERIAL_USB 0x0c03 +#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300 +#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310 +#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320 #define PCI_CLASS_SERIAL_FIBER 0x0c04 #define PCI_CLASS_SERIAL_SMBUS 0x0c05 -- GitLab From 423e489d704d05c6e8c2927fb1854db85914912a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 19 Oct 2005 13:06:13 -0400 Subject: [PATCH 0832/1519] [PATCH] hid-core: Add Clear-Halt on the Interrupt-in endpoint This patch (as577) adds a Clear-Halt call on the Interrupt-in endpoint during input device configuration. Without it my HP USB keyboard doesn't work. Vojtech says it's worth trying, since it might help with some recalcitrant devices. On the other hand, it might interfere with others. I'm submitting it so that it can get tested by a range of users. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index f7fcce731f54..79ddce4555ab 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1784,6 +1784,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) hid->urbctrl->transfer_dma = hid->ctrlbuf_dma; hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP); + /* May be needed for some devices */ + usb_clear_halt(hid->dev, hid->urbin->pipe); + return hid; fail: -- GitLab From b876aef7f890d8c59a45b78858a36cf60fddf522 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 23 Oct 2005 19:38:56 -0700 Subject: [PATCH 0833/1519] [PATCH] PATCH: usb-storage: move GetMaxLUN later in time This patch is originally from Alan Stern (as557). It has been re-diffed against a current tree, and I also corrected a minor merging error. Some time ago we introduced a delay before device scanning, because many devices do not like to receive SCSI commands right after enumeration. Now it turns out there's a device that doesn't like to receive Get-Max-LUN right after enumeration either. Accordingly this patch delays the Get-Max-LUN request until the beginning of the scanning procedure. This fixes Bugzilla entry #5010. Three things are worth noting. First, I removed the locking code from usb_stor_acquire_resources. It's not needed, because the locking is to protect against disconnect events and acquire_resources is only called during probe (so the disconnect routine can't be called). Second, I initialized to 0 the buffer used for the Get-Max-LUN response. It's not really necessary, but it will prevent random values from showing up in the debugging log when the request fails. Third, I added a test against the SINGLE_LUN flag. This will allow us to use the flag to indicate Bulk-only devices that can't handle Get-Max-LUN. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/transport.c | 1 + drivers/usb/storage/usb.c | 30 +++++++++++++----------------- 2 files changed, 14 insertions(+), 17 deletions(-) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index c1ba5301ebfc..e89e945fc4a7 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -923,6 +923,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us) int result; /* issue the command */ + us->iobuf[0] = 0; result = usb_stor_control_msg(us, us->recv_ctrl_pipe, US_BULK_GET_MAX_LUN, USB_DIR_IN | USB_TYPE_CLASS | diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5164900e40c1..92ee079d9172 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -747,25 +747,13 @@ static int usb_stor_acquire_resources(struct us_data *us) return -ENOMEM; } - /* Lock the device while we carry out the next two operations */ - down(&us->dev_semaphore); - - /* For bulk-only devices, determine the max LUN value */ - if (us->protocol == US_PR_BULK) { - p = usb_stor_Bulk_max_lun(us); - if (p < 0) { - up(&us->dev_semaphore); - return p; - } - us->max_lun = p; - } - /* Just before we start our control thread, initialize * the device if it needs initialization */ - if (us->unusual_dev->initFunction) - us->unusual_dev->initFunction(us); - - up(&us->dev_semaphore); + if (us->unusual_dev->initFunction) { + p = us->unusual_dev->initFunction(us); + if (p) + return p; + } /* Start up our control thread */ p = kernel_thread(usb_stor_control_thread, us, CLONE_VM); @@ -904,6 +892,14 @@ static int usb_stor_scan_thread(void * __us) /* If the device is still connected, perform the scanning */ if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { + + /* For bulk-only devices, determine the max LUN value */ + if (us->protocol == US_PR_BULK && + !(us->flags & US_FL_SINGLE_LUN)) { + down(&us->dev_semaphore); + us->max_lun = usb_stor_Bulk_max_lun(us); + up(&us->dev_semaphore); + } scsi_scan_host(us_to_host(us)); printk(KERN_DEBUG "usb-storage: device scan complete\n"); -- GitLab From bbafa4668f37f5093a3ae2a8b0cbe327e24e12da Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 23 Oct 2005 19:40:22 -0700 Subject: [PATCH 0834/1519] [PATCH] PATCH: usb-storage: allocate separate sense buffer This patch is from Alan Stern (as560). It has been rediffed against a current tree. This patch allocates a separate buffer for usb-storage to use when auto-sensing. Up to now we have been using the sense buffer embedded in a scsi_cmnd struct, which is dangerous on hosts that (a) don't do cache-coherent DMA or (b) have DMA alignment restrictions. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/transport.c | 5 +++-- drivers/usb/storage/usb.c | 8 ++++++++ drivers/usb/storage/usb.h | 2 ++ 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index e89e945fc4a7..7ca896a342e3 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -636,11 +636,11 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* use the new buffer we have */ old_request_buffer = srb->request_buffer; - srb->request_buffer = srb->sense_buffer; + srb->request_buffer = us->sensebuf; /* set the buffer length for transfer */ old_request_bufflen = srb->request_bufflen; - srb->request_bufflen = 18; + srb->request_bufflen = US_SENSE_SIZE; /* set up for no scatter-gather use */ old_sg = srb->use_sg; @@ -652,6 +652,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) temp_result = us->transport(us->srb, us); /* let's clean up right away */ + memcpy(srb->sense_buffer, us->sensebuf, US_SENSE_SIZE); srb->resid = old_resid; srb->request_buffer = old_request_buffer; srb->request_bufflen = old_request_bufflen; diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 92ee079d9172..eb901817b7d2 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -467,6 +467,12 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf) US_DEBUGP("I/O buffer allocation failed\n"); return -ENOMEM; } + + us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL); + if (!us->sensebuf) { + US_DEBUGP("Sense buffer allocation failed\n"); + return -ENOMEM; + } return 0; } @@ -800,6 +806,8 @@ static void dissociate_dev(struct us_data *us) { US_DEBUGP("-- %s\n", __FUNCTION__); + kfree(us->sensebuf); + /* Free the device-related DMA-mapped buffers */ if (us->cr) usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr, diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index a195adae57b6..dfa4dc71dd3e 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -117,6 +117,7 @@ enum { US_DO_ALL_FLAGS }; */ #define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */ +#define US_SENSE_SIZE 18 /* Size of the autosense data buffer */ typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); typedef int (*trans_reset)(struct us_data*); @@ -168,6 +169,7 @@ struct us_data { struct usb_ctrlrequest *cr; /* control requests */ struct usb_sg_request current_sg; /* scatter-gather req. */ unsigned char *iobuf; /* I/O buffer */ + unsigned char *sensebuf; /* sense data buffer */ dma_addr_t cr_dma; /* buffer DMA addresses */ dma_addr_t iobuf_dma; -- GitLab From ce2596df79ddbac605a290f4c7cf011cb40524fc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 23 Oct 2005 19:41:39 -0700 Subject: [PATCH 0835/1519] [PATCH] PATCH: usb-storage: implement minimal PM This patch from Alan Stern started as as568. It has been rediffed against a current tree. This patch adds minimal suspend/resume support to usb-storage. Just enough for it to qualify as PM-aware. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 58 +++++++++++++++++++++++++++++++-------- 1 file changed, 46 insertions(+), 12 deletions(-) diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index eb901817b7d2..c1a902691bc6 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -111,11 +111,6 @@ static atomic_t total_threads = ATOMIC_INIT(0); static DECLARE_COMPLETION(threads_gone); -static int storage_probe(struct usb_interface *iface, - const struct usb_device_id *id); - -static void storage_disconnect(struct usb_interface *iface); - /* The entries in this table, except for final ones here * (USB_MASS_STORAGE_CLASS and the empty entry), correspond, * line for line with the entries of us_unsuaul_dev_list[]. @@ -233,13 +228,40 @@ static struct us_unusual_dev us_unusual_dev_list[] = { { NULL } }; -static struct usb_driver usb_storage_driver = { - .owner = THIS_MODULE, - .name = "usb-storage", - .probe = storage_probe, - .disconnect = storage_disconnect, - .id_table = storage_usb_ids, -}; + +#ifdef CONFIG_PM /* Minimal support for suspend and resume */ + +static int storage_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct us_data *us = usb_get_intfdata(iface); + + /* Wait until no command is running */ + down(&us->dev_semaphore); + + US_DEBUGP("%s\n", __FUNCTION__); + iface->dev.power.power_state.event = message.event; + + /* When runtime PM is working, we'll set a flag to indicate + * whether we should autoresume when a SCSI request arrives. */ + + up(&us->dev_semaphore); + return 0; +} + +static int storage_resume(struct usb_interface *iface) +{ + struct us_data *us = usb_get_intfdata(iface); + + down(&us->dev_semaphore); + + US_DEBUGP("%s\n", __FUNCTION__); + iface->dev.power.power_state.event = PM_EVENT_ON; + + up(&us->dev_semaphore); + return 0; +} + +#endif /* CONFIG_PM */ /* * fill_inquiry_response takes an unsigned char array (which must @@ -1042,6 +1064,18 @@ static void storage_disconnect(struct usb_interface *intf) * Initialization and registration ***********************************************************************/ +static struct usb_driver usb_storage_driver = { + .owner = THIS_MODULE, + .name = "usb-storage", + .probe = storage_probe, + .disconnect = storage_disconnect, +#ifdef CONFIG_PM + .suspend = storage_suspend, + .resume = storage_resume, +#endif + .id_table = storage_usb_ids, +}; + static int __init usb_stor_init(void) { int retval; -- GitLab From 3f13e66e219238e025ff561d69826da9342c3f4a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 23 Oct 2005 19:43:36 -0700 Subject: [PATCH 0836/1519] [PATCH] PATCH: usb-storage: use kthread API This patch is originally from Alan Stern (as569). It has been rediffed against a current tree. This patch converts usb-storage to use the kthread API for creating its control and scanning threads. The new code doesn't use kthread_stop because the threads need (or will need in the future) to exit asynchronously. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 63 +++++++++++++-------------------------- drivers/usb/storage/usb.h | 3 -- 2 files changed, 21 insertions(+), 45 deletions(-) diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index c1a902691bc6..3847ebed2aa4 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -54,6 +54,7 @@ #include #include #include +#include #include #include @@ -310,22 +311,7 @@ static int usb_stor_control_thread(void * __us) struct us_data *us = (struct us_data *)__us; struct Scsi_Host *host = us_to_host(us); - lock_kernel(); - - /* - * This thread doesn't need any user-level access, - * so get rid of all our resources. - */ - daemonize("usb-storage"); current->flags |= PF_NOFREEZE; - unlock_kernel(); - - /* acquire a reference to the host, so it won't be deallocated - * until we're ready to exit */ - scsi_host_get(host); - - /* signal that we've started the thread */ - complete(&(us->notify)); for(;;) { US_DEBUGP("*** thread sleeping.\n"); @@ -768,6 +754,7 @@ static int get_pipes(struct us_data *us) static int usb_stor_acquire_resources(struct us_data *us) { int p; + struct task_struct *th; us->current_urb = usb_alloc_urb(0, GFP_KERNEL); if (!us->current_urb) { @@ -784,17 +771,19 @@ static int usb_stor_acquire_resources(struct us_data *us) } /* Start up our control thread */ - p = kernel_thread(usb_stor_control_thread, us, CLONE_VM); - if (p < 0) { + th = kthread_create(usb_stor_control_thread, us, "usb-storage"); + if (IS_ERR(th)) { printk(KERN_WARNING USB_STORAGE "Unable to start control thread\n"); - return p; + return PTR_ERR(th); } - us->pid = p; - atomic_inc(&total_threads); - /* Wait for the thread to start */ - wait_for_completion(&(us->notify)); + /* Take a reference to the host for the control thread and + * count it among all the threads we have launched. Then + * start it up. */ + scsi_host_get(us_to_host(us)); + atomic_inc(&total_threads); + wake_up_process(th); return 0; } @@ -890,21 +879,6 @@ static int usb_stor_scan_thread(void * __us) { struct us_data *us = (struct us_data *)__us; - /* - * This thread doesn't need any user-level access, - * so get rid of all our resources. - */ - lock_kernel(); - daemonize("usb-stor-scan"); - unlock_kernel(); - - /* Acquire a reference to the host, so it won't be deallocated - * until we're ready to exit */ - scsi_host_get(us_to_host(us)); - - /* Signal that we've started the thread */ - complete(&(us->notify)); - printk(KERN_DEBUG "usb-storage: device found at %d\n", us->pusb_dev->devnum); @@ -949,6 +923,7 @@ static int storage_probe(struct usb_interface *intf, struct us_data *us; const int id_index = id - storage_usb_ids; int result; + struct task_struct *th; US_DEBUGP("USB Mass Storage device detected\n"); @@ -1029,17 +1004,21 @@ static int storage_probe(struct usb_interface *intf, } /* Start up the thread for delayed SCSI-device scanning */ - result = kernel_thread(usb_stor_scan_thread, us, CLONE_VM); - if (result < 0) { + th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan"); + if (IS_ERR(th)) { printk(KERN_WARNING USB_STORAGE "Unable to start the device-scanning thread\n"); quiesce_and_remove_host(us); + result = PTR_ERR(th); goto BadDevice; } - atomic_inc(&total_threads); - /* Wait for the thread to start */ - wait_for_completion(&(us->notify)); + /* Take a reference to the host for the scanning thread and + * count it among all the threads we have launched. Then + * start it up. */ + scsi_host_get(us_to_host(us)); + atomic_inc(&total_threads); + wake_up_process(th); return 0; diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index dfa4dc71dd3e..98b09711a739 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -161,9 +161,6 @@ struct us_data { struct scsi_cmnd *srb; /* current srb */ unsigned int tag; /* current dCBWTag */ - /* thread information */ - int pid; /* control thread */ - /* control and bulk communications data */ struct urb *current_urb; /* USB requests */ struct usb_ctrlrequest *cr; /* control requests */ -- GitLab From 72129cd6577793408ff546b0ddd5794c33f32399 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 25 Oct 2005 23:34:03 +0400 Subject: [PATCH 0837/1519] [PATCH] mdc800: remove embrions of C++ exceptions Signed-off-by: Alexey Dobriyan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/image/mdc800.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index e4ec133ee74a..1d973bcf56aa 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -975,13 +975,13 @@ static struct usb_driver mdc800_usb_driver = Init and Cleanup this driver (Main Functions) *************************************************************************/ -#define try(A) if (!(A)) goto cleanup_on_fail; - static int __init usb_mdc800_init (void) { int retval = -ENODEV; /* Allocate Memory */ - try (mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL)); + mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL); + if (!mdc800) + goto cleanup_on_fail; memset(mdc800, 0, sizeof(struct mdc800_data)); mdc800->dev = NULL; @@ -997,13 +997,25 @@ static int __init usb_mdc800_init (void) mdc800->downloaded = 0; mdc800->written = 0; - try (mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL)); - try (mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL)); - try (mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL)); + mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL); + if (!mdc800->irq_urb_buffer) + goto cleanup_on_fail; + mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL); + if (!mdc800->write_urb_buffer) + goto cleanup_on_fail; + mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL); + if (!mdc800->download_urb_buffer) + goto cleanup_on_fail; - try (mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL)); - try (mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL)); - try (mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL)); + mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL); + if (!mdc800->irq_urb) + goto cleanup_on_fail; + mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL); + if (!mdc800->download_urb) + goto cleanup_on_fail; + mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL); + if (!mdc800->write_urb) + goto cleanup_on_fail; /* Register the driver */ retval = usb_register(&mdc800_usb_driver); -- GitLab From e52783206ada0c0276c8dd74c0ecd0007ead7c00 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 23 Oct 2005 23:52:39 -0700 Subject: [PATCH 0838/1519] [PATCH] USB Storage: Expand range of Freecom unusual_devs entry Freecom seems to be one of those vendors that can't get the GET CAPACITY thing right. This expands the US_FL_FIX_CAPACITY flag for the entire range of their fccd product line. This is based on a patch sent by Stuart Black . Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d0f6a7e2fe31..9e926a8f2116 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -756,7 +756,7 @@ UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, #endif /* Reported by Eero Volotinen */ -UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406, +UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, "Freecom Technologies", "FHD-Classic", US_SC_DEVICE, US_PR_DEVICE, NULL, -- GitLab From be69e5b1900a19a545becda822b18d6f09168ba5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 25 Oct 2005 15:56:06 -0400 Subject: [PATCH 0839/1519] [PATCH] usbcore: Improve endpoint sysfs file handling This revised patch (as587b) improves the implementation of USB endpoint sysfs files. Instead of storing a whole bunch of attributes for every single endpoint, each endpoint now gets its own kobject and they can share a static list of attributes. The number of extra fields added to struct usb_host_endpoint has been reduced from 4 to 1. The bEndpointAddress field is retained even though it is redundant (it repeats the same information as the attributes' directory name). The code avoids calling kobject_register, to prevent generating unwanted hotplug events. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 219 ++++++++++++++++++++++----------------- include/linux/usb.h | 5 +- 2 files changed, 125 insertions(+), 99 deletions(-) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 4bdbc9df6e03..f18317fb49ee 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -23,43 +23,56 @@ #include "usb.h" /* endpoint stuff */ -struct endpoint_attribute { - struct device_attribute dev_attr; - struct usb_endpoint_descriptor *endpoint; +struct ep_object { + struct usb_endpoint_descriptor *desc; struct usb_device *udev; + struct kobject kobj; }; -#define to_endpoint_attr(_dev_attr) \ - container_of(_dev_attr, struct endpoint_attribute, dev_attr) - -#define usb_ep_attr(field, format_string) \ -static ssize_t show_ep_##field(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); \ - \ - return sprintf(buf, format_string, endpoint_attr->endpoint->field); \ -} +#define to_ep_object(_kobj) \ + container_of(_kobj, struct ep_object, kobj) + +struct ep_attribute { + struct attribute attr; + ssize_t (*show)(struct usb_device *, + struct usb_endpoint_descriptor *, char *); +}; +#define to_ep_attribute(_attr) \ + container_of(_attr, struct ep_attribute, attr) + +#define EP_ATTR(_name) \ +struct ep_attribute ep_##_name = { \ + .attr = {.name = #_name, .owner = THIS_MODULE, \ + .mode = S_IRUGO}, \ + .show = show_ep_##_name} + +#define usb_ep_attr(field, format_string) \ +static ssize_t show_ep_##field(struct usb_device *udev, \ + struct usb_endpoint_descriptor *desc, \ + char *buf) \ +{ \ + return sprintf(buf, format_string, desc->field); \ +} \ +static EP_ATTR(field); + usb_ep_attr(bLength, "%02x\n") -usb_ep_attr(bDescriptorType, "%02x\n") usb_ep_attr(bEndpointAddress, "%02x\n") usb_ep_attr(bmAttributes, "%02x\n") usb_ep_attr(bInterval, "%02x\n") -static ssize_t show_ep_wMaxPacketSize(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t show_ep_wMaxPacketSize(struct usb_device *udev, + struct usb_endpoint_descriptor *desc, char *buf) { - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); - return sprintf(buf, "%04x\n", - le16_to_cpu(endpoint_attr->endpoint->wMaxPacketSize) & 0x07ff); + le16_to_cpu(desc->wMaxPacketSize) & 0x07ff); } +static EP_ATTR(wMaxPacketSize); -static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_ep_type(struct usb_device *udev, + struct usb_endpoint_descriptor *desc, char *buf) { - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); char *type = "unknown"; - switch (endpoint_attr->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_CONTROL: type = "Control"; break; @@ -75,35 +88,34 @@ static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr, c } return sprintf(buf, "%s\n", type); } +static EP_ATTR(type); -static ssize_t show_ep_interval(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_ep_interval(struct usb_device *udev, + struct usb_endpoint_descriptor *desc, char *buf) { - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); - struct usb_device *udev = endpoint_attr->udev; - struct usb_endpoint_descriptor *endpoint = endpoint_attr->endpoint; char unit; unsigned interval = 0; unsigned in; - in = (endpoint->bEndpointAddress & USB_DIR_IN); + in = (desc->bEndpointAddress & USB_DIR_IN); - switch (endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_CONTROL: if (udev->speed == USB_SPEED_HIGH) /* uframes per NAK */ - interval = endpoint->bInterval; + interval = desc->bInterval; break; case USB_ENDPOINT_XFER_ISOC: - interval = 1 << (endpoint->bInterval - 1); + interval = 1 << (desc->bInterval - 1); break; case USB_ENDPOINT_XFER_BULK: - if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ - interval = endpoint->bInterval; + if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + interval = desc->bInterval; break; case USB_ENDPOINT_XFER_INT: - if (udev->speed == USB_SPEED_HIGH) { - interval = 1 << (endpoint->bInterval - 1); - } else - interval = endpoint->bInterval; + if (udev->speed == USB_SPEED_HIGH) + interval = 1 << (desc->bInterval - 1); + else + interval = desc->bInterval; break; } interval *= (udev->speed == USB_SPEED_HIGH) ? 125 : 1000; @@ -116,78 +128,95 @@ static ssize_t show_ep_interval(struct device *dev, struct device_attribute *att return sprintf(buf, "%d%cs\n", interval, unit); } +static EP_ATTR(interval); -static ssize_t show_ep_direction(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_ep_direction(struct usb_device *udev, + struct usb_endpoint_descriptor *desc, char *buf) { - struct endpoint_attribute *endpoint_attr = to_endpoint_attr(attr); char *direction; - if ((endpoint_attr->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL) + if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL) direction = "both"; - else if (endpoint_attr->endpoint->bEndpointAddress & USB_DIR_IN) + else if (desc->bEndpointAddress & USB_DIR_IN) direction = "in"; else direction = "out"; return sprintf(buf, "%s\n", direction); } +static EP_ATTR(direction); + +static struct attribute *ep_attrs[] = { + &ep_bLength.attr, + &ep_bEndpointAddress.attr, + &ep_bmAttributes.attr, + &ep_bInterval.attr, + &ep_wMaxPacketSize.attr, + &ep_type.attr, + &ep_interval.attr, + &ep_direction.attr, + NULL, +}; -static struct endpoint_attribute *create_ep_attr(struct usb_endpoint_descriptor *endpoint, - struct usb_device *udev, char *name, - ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf)) +static void ep_object_release(struct kobject *kobj) { - struct endpoint_attribute *ep_attr; - - ep_attr = kzalloc(sizeof(*ep_attr), GFP_KERNEL); - if (ep_attr) { - ep_attr->endpoint = endpoint; - ep_attr->udev = udev; - ep_attr->dev_attr.attr.name = name; - ep_attr->dev_attr.attr.mode = 0444; - ep_attr->dev_attr.attr.owner = THIS_MODULE; - ep_attr->dev_attr.show = show; - } - return ep_attr; + kfree(to_ep_object(kobj)); } -static void usb_create_ep_files(struct kobject *kobj, struct usb_host_endpoint *endpoint, struct usb_device *udev) +static ssize_t ep_object_show(struct kobject *kobj, struct attribute *attr, + char *buf) { - struct usb_endpoint_descriptor *ep; - - ep = &endpoint->desc; - - endpoint->attrs = kzalloc(sizeof(struct attribute *) * 10, GFP_KERNEL); - endpoint->attrs[0] = &(create_ep_attr(ep, udev, "direction", show_ep_direction)->dev_attr.attr); - endpoint->attrs[1] = &(create_ep_attr(ep, udev, "type", show_ep_type)->dev_attr.attr); - endpoint->attrs[2] = &(create_ep_attr(ep, udev, "bLength", show_ep_bLength)->dev_attr.attr); - endpoint->attrs[3] = &(create_ep_attr(ep, udev, "bDescriptorType", show_ep_bDescriptorType)->dev_attr.attr); - endpoint->attrs[4] = &(create_ep_attr(ep, udev, "bEndpointAddress", show_ep_bEndpointAddress)->dev_attr.attr); - endpoint->attrs[5] = &(create_ep_attr(ep, udev, "bmAttributes", show_ep_bmAttributes)->dev_attr.attr); - endpoint->attrs[6] = &(create_ep_attr(ep, udev, "wMaxPacketSize", show_ep_wMaxPacketSize)->dev_attr.attr); - endpoint->attrs[7] = &(create_ep_attr(ep, udev, "bInterval", show_ep_bInterval)->dev_attr.attr); - endpoint->attrs[8] = &(create_ep_attr(ep, udev, "interval", show_ep_interval)->dev_attr.attr); - endpoint->attrs[9] = NULL; - endpoint->num_attrs = 9; - - endpoint->attr_group = kzalloc(sizeof(*endpoint->attr_group), GFP_KERNEL); - endpoint->attr_name = kzalloc(10, GFP_KERNEL); - sprintf(endpoint->attr_name, "ep_%02x", endpoint->desc.bEndpointAddress); - - endpoint->attr_group->attrs = endpoint->attrs; - endpoint->attr_group->name = endpoint->attr_name; - sysfs_create_group(kobj, endpoint->attr_group); + struct ep_object *ep_obj = to_ep_object(kobj); + struct ep_attribute *ep_attr = to_ep_attribute(attr); + + return (ep_attr->show)(ep_obj->udev, ep_obj->desc, buf); } -static void usb_remove_ep_files(struct kobject *kobj, struct usb_host_endpoint *endpoint) +static struct sysfs_ops ep_object_sysfs_ops = { + .show = ep_object_show, +}; + +static struct kobj_type ep_object_ktype = { + .release = ep_object_release, + .sysfs_ops = &ep_object_sysfs_ops, + .default_attrs = ep_attrs, +}; + +static void usb_create_ep_files(struct kobject *parent, + struct usb_host_endpoint *endpoint, + struct usb_device *udev) { - int i; + struct ep_object *ep_obj; + struct kobject *kobj; + + ep_obj = kzalloc(sizeof(struct ep_object), GFP_KERNEL); + if (!ep_obj) + return; - sysfs_remove_group(kobj, endpoint->attr_group); - kfree(endpoint->attr_group); - kfree(endpoint->attr_name); - for (i = 0; i < endpoint->num_attrs; ++i) - kfree(endpoint->attrs[i]); - kfree(endpoint->attrs); + ep_obj->desc = &endpoint->desc; + ep_obj->udev = udev; + + kobj = &ep_obj->kobj; + kobject_set_name(kobj, "ep_%02x", endpoint->desc.bEndpointAddress); + kobj->parent = parent; + kobj->ktype = &ep_object_ktype; + + /* Don't use kobject_register, because it generates a hotplug event */ + kobject_init(kobj); + if (kobject_add(kobj) == 0) + endpoint->kobj = kobj; + else + kobject_put(kobj); +} + +static void usb_remove_ep_files(struct usb_host_endpoint *endpoint) +{ + + if (endpoint->kobj) { + kobject_del(endpoint->kobj); + kobject_put(endpoint->kobj); + endpoint->kobj = NULL; + } } /* Active configuration fields */ @@ -411,7 +440,7 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev) { struct device *dev = &udev->dev; - usb_remove_ep_files(&dev->kobj, &udev->ep0); + usb_remove_ep_files(&udev->ep0); sysfs_remove_group(&dev->kobj, &dev_attr_grp); if (udev->descriptor.iManufacturer) @@ -496,7 +525,7 @@ static struct attribute_group intf_attr_grp = { .attrs = intf_attrs, }; -static void usb_create_intf_ep_files(struct usb_interface *intf) +static inline void usb_create_intf_ep_files(struct usb_interface *intf) { struct usb_host_interface *iface_desc; int i; @@ -504,17 +533,17 @@ static void usb_create_intf_ep_files(struct usb_interface *intf) iface_desc = intf->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i], - interface_to_usbdev(intf)); + interface_to_usbdev(intf)); } -static void usb_remove_intf_ep_files(struct usb_interface *intf) +static inline void usb_remove_intf_ep_files(struct usb_interface *intf) { struct usb_host_interface *iface_desc; int i; iface_desc = intf->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) - usb_remove_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i]); + usb_remove_ep_files(&iface_desc->endpoint[i]); } void usb_create_sysfs_intf_files (struct usb_interface *intf) diff --git a/include/linux/usb.h b/include/linux/usb.h index a2d923fd54f9..465ff4585ca5 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -57,10 +57,7 @@ struct usb_host_endpoint { struct usb_endpoint_descriptor desc; struct list_head urb_list; void *hcpriv; - char *attr_name; - struct attribute_group *attr_group; - struct attribute **attrs; - int num_attrs; + struct kobject *kobj; /* For sysfs info */ unsigned char *extra; /* Extra descriptors */ int extralen; -- GitLab From 0e6c8e8db508fcb292836b23d039649c5de29090 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 15:33:03 -0400 Subject: [PATCH 0840/1519] [PATCH] usbcore: endpoint attributes track altsetting changes This patch (as588) fixes the way endpoint attribute files are registered and unregistered. Now they will correctly track along with altsetting changes. This fixes bugzilla entry #5467. In a separate but related change, when a usb_reset_configuration call fails, the device state is not changed to USB_STATE_ADDRESS. In the first place, failure means that we don't know what the state is, not that we know the device is unconfigured. In the second place, doing this can potentially lead to a memory leak, since usbcore might not realize there still is a current configuration that needs to be destroyed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 574d0d4b3401..5ad0d5e28119 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1149,6 +1149,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) */ /* prevent submissions using previous endpoint settings */ + if (device_is_registered(&iface->dev)) + usb_remove_sysfs_intf_files(iface); usb_disable_interface(dev, iface); iface->cur_altsetting = alt; @@ -1184,6 +1186,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) * (Likewise, EP0 never "halts" on well designed devices.) */ usb_enable_interface(dev, iface); + if (device_is_registered(&iface->dev)) + usb_create_sysfs_intf_files(iface); return 0; } @@ -1233,10 +1237,8 @@ int usb_reset_configuration(struct usb_device *dev) USB_REQ_SET_CONFIGURATION, 0, config->desc.bConfigurationValue, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (retval < 0) { - usb_set_device_state(dev, USB_STATE_ADDRESS); + if (retval < 0) return retval; - } dev->toggle[0] = dev->toggle[1] = 0; @@ -1245,6 +1247,8 @@ int usb_reset_configuration(struct usb_device *dev) struct usb_interface *intf = config->interface[i]; struct usb_host_interface *alt; + if (device_is_registered(&intf->dev)) + usb_remove_sysfs_intf_files(intf); alt = usb_altnum_to_altsetting(intf, 0); /* No altsetting 0? We'll assume the first altsetting. @@ -1257,6 +1261,8 @@ int usb_reset_configuration(struct usb_device *dev) intf->cur_altsetting = alt; usb_enable_interface(dev, intf); + if (device_is_registered(&intf->dev)) + usb_create_sysfs_intf_files(intf); } return 0; } -- GitLab From b724ae77969fd832be71419dca74bece9af287ff Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 15:36:00 -0400 Subject: [PATCH 0841/1519] [PATCH] usbcore: Wrap lines before column 80 I can't stand text lines that wrap-around in my 80-column windows. This patch (as589) makes cosmetic changes to a couple of source files. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 30 ++++++--- include/linux/usb.h | 132 +++++++++++++++++++++++++-------------- 2 files changed, 106 insertions(+), 56 deletions(-) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index f18317fb49ee..4cca77cf0c48 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -221,7 +221,8 @@ static void usb_remove_ep_files(struct usb_host_endpoint *endpoint) /* Active configuration fields */ #define usb_actconfig_show(field, multiplier, format_string) \ -static ssize_t show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_##field (struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ struct usb_host_config *actconfig; \ @@ -243,7 +244,8 @@ usb_actconfig_attr (bNumInterfaces, 1, "%2d\n") usb_actconfig_attr (bmAttributes, 1, "%2x\n") usb_actconfig_attr (bMaxPower, 2, "%3dmA\n") -static ssize_t show_configuration_string(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_configuration_string(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_device *udev; struct usb_host_config *actconfig; @@ -266,7 +268,8 @@ static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL); usb_actconfig_show(bConfigurationValue, 1, "%u\n"); static ssize_t -set_bConfigurationValue (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +set_bConfigurationValue (struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct usb_device *udev = udev = to_usb_device (dev); int config, value; @@ -284,7 +287,8 @@ static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR, /* String fields */ #define usb_string_attr(name) \ -static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ int len; \ @@ -364,7 +368,8 @@ static DEVICE_ATTR(maxchild, S_IRUGO, show_maxchild, NULL); /* Descriptor fields */ #define usb_descriptor_attr_le16(field, format_string) \ static ssize_t \ -show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ +show_##field (struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct usb_device *udev; \ \ @@ -380,7 +385,8 @@ usb_descriptor_attr_le16(bcdDevice, "%04x\n") #define usb_descriptor_attr(field, format_string) \ static ssize_t \ -show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ +show_##field (struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct usb_device *udev; \ \ @@ -455,11 +461,13 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev) /* Interface fields */ #define usb_intf_attr(field, format_string) \ static ssize_t \ -show_##field (struct device *dev, struct device_attribute *attr, char *buf) \ +show_##field (struct device *dev, struct device_attribute *attr, \ + char *buf) \ { \ struct usb_interface *intf = to_usb_interface (dev); \ \ - return sprintf (buf, format_string, intf->cur_altsetting->desc.field); \ + return sprintf (buf, format_string, \ + intf->cur_altsetting->desc.field); \ } \ static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL); @@ -470,7 +478,8 @@ usb_intf_attr (bInterfaceClass, "%02x\n") usb_intf_attr (bInterfaceSubClass, "%02x\n") usb_intf_attr (bInterfaceProtocol, "%02x\n") -static ssize_t show_interface_string(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_interface_string(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_interface *intf; struct usb_device *udev; @@ -487,7 +496,8 @@ static ssize_t show_interface_string(struct device *dev, struct device_attribute } static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL); -static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_modalias(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_interface *intf; struct usb_device *udev; diff --git a/include/linux/usb.h b/include/linux/usb.h index 465ff4585ca5..c500d6b5a16d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -137,7 +137,8 @@ struct usb_interface { * active alternate setting */ unsigned num_altsetting; /* number of alternate settings */ - int minor; /* minor number this interface is bound to */ + int minor; /* minor number this interface is + * bound to */ enum usb_interface_condition condition; /* state of binding */ struct device dev; /* interface specific device info */ struct class_device *class_dev; @@ -249,7 +250,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, __usb_get_extra_descriptor((ifpoint)->extra,(ifpoint)->extralen,\ type,(void**)ptr) -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ struct usb_operations; @@ -269,7 +270,8 @@ struct usb_bus { unsigned is_b_host:1; /* true during some HNP roleswitches */ unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */ - int devnum_next; /* Next open device number in round-robin allocation */ + int devnum_next; /* Next open device number in + * round-robin allocation */ struct usb_devmap devmap; /* device address allocation map */ struct usb_operations *op; /* Operations (specific to the HC) */ @@ -290,15 +292,16 @@ struct usb_bus { struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */ struct class_device *class_dev; /* class device for this bus */ - struct kref kref; /* handles reference counting this bus */ - void (*release)(struct usb_bus *bus); /* function to destroy this bus's memory */ + struct kref kref; /* reference counting for this bus */ + void (*release)(struct usb_bus *bus); + #if defined(CONFIG_USB_MON) struct mon_bus *mon_bus; /* non-null when associated */ int monitored; /* non-zero when monitored */ #endif }; -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /* This is arbitrary. * From USB 2.0 spec Table 11-13, offset 7, a hub can @@ -327,7 +330,8 @@ struct usb_device { struct semaphore serialize; - unsigned int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */ + unsigned int toggle[2]; /* one bit for each endpoint + * ([0] = IN, [1] = OUT) */ struct usb_device *parent; /* our hub, unless we're the root */ struct usb_bus *bus; /* Bus we're part of */ @@ -344,7 +348,7 @@ struct usb_device { char **rawdescriptors; /* Raw descriptors for each config */ - int have_langid; /* whether string_langid is valid yet */ + int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ char *product; @@ -441,22 +445,31 @@ extern struct usb_host_interface *usb_altnum_to_altsetting( * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are * high speed, and a different one if they are full or low speed. */ -static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) +static inline int usb_make_path (struct usb_device *dev, char *buf, + size_t size) { int actual; - actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, dev->devpath); + actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, + dev->devpath); return (actual >= (int)size) ? -1 : actual; } /*-------------------------------------------------------------------------*/ -#define USB_DEVICE_ID_MATCH_DEVICE (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) -#define USB_DEVICE_ID_MATCH_DEV_RANGE (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI) -#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE) +#define USB_DEVICE_ID_MATCH_DEVICE \ + (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) +#define USB_DEVICE_ID_MATCH_DEV_RANGE \ + (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI) +#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION \ + (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE) #define USB_DEVICE_ID_MATCH_DEV_INFO \ - (USB_DEVICE_ID_MATCH_DEV_CLASS | USB_DEVICE_ID_MATCH_DEV_SUBCLASS | USB_DEVICE_ID_MATCH_DEV_PROTOCOL) + (USB_DEVICE_ID_MATCH_DEV_CLASS | \ + USB_DEVICE_ID_MATCH_DEV_SUBCLASS | \ + USB_DEVICE_ID_MATCH_DEV_PROTOCOL) #define USB_DEVICE_ID_MATCH_INT_INFO \ - (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS | USB_DEVICE_ID_MATCH_INT_PROTOCOL) + (USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_SUBCLASS | \ + USB_DEVICE_ID_MATCH_INT_PROTOCOL) /** * USB_DEVICE - macro used to describe a specific usb device @@ -467,9 +480,11 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) * specific device. */ #define USB_DEVICE(vend,prod) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), .idProduct = (prod) + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), \ + .idProduct = (prod) /** - * USB_DEVICE_VER - macro used to describe a specific usb device with a version range + * USB_DEVICE_VER - macro used to describe a specific usb device with a + * version range * @vend: the 16 bit USB Vendor ID * @prod: the 16 bit USB Product ID * @lo: the bcdDevice_lo value @@ -479,7 +494,9 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) * specific device, with a version range. */ #define USB_DEVICE_VER(vend,prod,lo,hi) \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, .idVendor = (vend), .idProduct = (prod), .bcdDevice_lo = (lo), .bcdDevice_hi = (hi) + .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, \ + .idVendor = (vend), .idProduct = (prod), \ + .bcdDevice_lo = (lo), .bcdDevice_hi = (hi) /** * USB_DEVICE_INFO - macro used to describe a class of usb devices @@ -491,7 +508,8 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) * specific class of devices. */ #define USB_DEVICE_INFO(cl,sc,pr) \ - .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), .bDeviceSubClass = (sc), .bDeviceProtocol = (pr) + .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), \ + .bDeviceSubClass = (sc), .bDeviceProtocol = (pr) /** * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces @@ -503,9 +521,10 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) * specific class of interfaces. */ #define USB_INTERFACE_INFO(cl,sc,pr) \ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr) + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr) -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /** * struct usb_driver - identifies USB driver to usbcore @@ -558,7 +577,8 @@ struct usb_driver { void (*disconnect) (struct usb_interface *intf); - int (*ioctl) (struct usb_interface *intf, unsigned int code, void *buf); + int (*ioctl) (struct usb_interface *intf, unsigned int code, + void *buf); int (*suspend) (struct usb_interface *intf, pm_message_t message); int (*resume) (struct usb_interface *intf); @@ -601,7 +621,7 @@ extern void usb_deregister_dev(struct usb_interface *intf, extern int usb_disabled(void); -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /* * URB support, for asynchronous request completions @@ -611,12 +631,14 @@ extern int usb_disabled(void); * urb->transfer_flags: */ #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ -#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame ignored */ +#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame + * ignored */ #define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ #define URB_NO_SETUP_DMA_MAP 0x0008 /* urb->setup_dma valid on submit */ #define URB_NO_FSBR 0x0020 /* UHCI-specific */ -#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */ -#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */ +#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ +#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt + * needed */ struct usb_iso_packet_descriptor { unsigned int offset; @@ -804,7 +826,8 @@ struct urb u8 reject; /* submissions will fail */ /* public, documented fields in the urb that can be used by drivers */ - struct list_head urb_list; /* list head for use by the urb owner */ + struct list_head urb_list; /* list head for use by the urb's + * current owner */ struct usb_device *dev; /* (in) pointer to associated device */ unsigned int pipe; /* (in) pipe information */ int status; /* (return) non-ISO status */ @@ -817,14 +840,16 @@ struct urb dma_addr_t setup_dma; /* (in) dma addr for setup_packet */ int start_frame; /* (modify) start frame (ISO) */ int number_of_packets; /* (in) number of ISO packets */ - int interval; /* (modify) transfer interval (INT/ISO) */ + int interval; /* (modify) transfer interval + * (INT/ISO) */ int error_count; /* (return) number of ISO errors */ void *context; /* (in) context for completion */ usb_complete_t complete; /* (in) completion routine */ - struct usb_iso_packet_descriptor iso_frame_desc[0]; /* (in) ISO ONLY */ + struct usb_iso_packet_descriptor iso_frame_desc[0]; + /* (in) ISO ONLY */ }; -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /** * usb_fill_control_urb - initializes a control urb @@ -1049,7 +1074,7 @@ void usb_sg_cancel (struct usb_sg_request *io); void usb_sg_wait (struct usb_sg_request *io); -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /* * For various legacy reasons, Linux has a small cookie that's paired with @@ -1090,23 +1115,34 @@ void usb_sg_wait (struct usb_sg_request *io); /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) -#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | ((bit) << (ep))) +#define usb_settoggle(dev, ep, out, bit) \ + ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ + ((bit) << (ep))) -static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) +static inline unsigned int __create_pipe(struct usb_device *dev, + unsigned int endpoint) { return (dev->devnum << 8) | (endpoint << 15); } /* Create various pipes... */ -#define usb_sndctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint)) -#define usb_rcvctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint)) -#define usb_rcvisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint)) -#define usb_rcvbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) -#define usb_sndintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint)) -#define usb_rcvintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndctrlpipe(dev,endpoint) \ + ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvctrlpipe(dev,endpoint) \ + ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndisocpipe(dev,endpoint) \ + ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvisocpipe(dev,endpoint) \ + ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndbulkpipe(dev,endpoint) \ + ((PIPE_BULK << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvbulkpipe(dev,endpoint) \ + ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndintpipe(dev,endpoint) \ + ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvintpipe(dev,endpoint) \ + ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) /*-------------------------------------------------------------------------*/ @@ -1130,7 +1166,7 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out) return le16_to_cpu(ep->desc.wMaxPacketSize); } -/* -------------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- */ /* Events from the usb core */ #define USB_DEVICE_ADD 0x0001 @@ -1141,14 +1177,18 @@ extern void usb_register_notify(struct notifier_block *nb); extern void usb_unregister_notify(struct notifier_block *nb); #ifdef DEBUG -#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg) +#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , \ + __FILE__ , ## arg) #else #define dbg(format, arg...) do {} while (0) #endif -#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ## arg) -#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ , ## arg) -#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__ , ## arg) +#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \ + __FILE__ , ## arg) +#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , \ + __FILE__ , ## arg) +#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , \ + __FILE__ , ## arg) #endif /* __KERNEL__ */ -- GitLab From 0a1ef3b5a765a6f20e7b8caf295aad3276243966 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 15:38:24 -0400 Subject: [PATCH 0842/1519] [PATCH] usbcore: Use kzalloc instead of kmalloc/memset This patch (as590) fixes up all the remaining places where usbcore can use kzalloc rather than kmalloc/memset. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 12 ++++-------- drivers/usb/core/devio.c | 4 ++-- drivers/usb/core/hcd.c | 3 +-- drivers/usb/core/hub.c | 4 +--- drivers/usb/core/message.c | 3 +-- drivers/usb/core/usb.c | 4 +--- 6 files changed, 10 insertions(+), 20 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 99595e07b653..63f374e62db2 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -188,10 +188,9 @@ static int usb_parse_interface(struct device *ddev, int cfgno, } len = sizeof(struct usb_host_endpoint) * num_ep; - alt->endpoint = kmalloc(len, GFP_KERNEL); + alt->endpoint = kzalloc(len, GFP_KERNEL); if (!alt->endpoint) return -ENOMEM; - memset(alt->endpoint, 0, len); /* Parse all the endpoint descriptors */ n = 0; @@ -353,10 +352,9 @@ static int usb_parse_configuration(struct device *ddev, int cfgidx, } len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j; - config->intf_cache[i] = intfc = kmalloc(len, GFP_KERNEL); + config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL); if (!intfc) return -ENOMEM; - memset(intfc, 0, len); kref_init(&intfc->ref); } @@ -459,16 +457,14 @@ int usb_get_configuration(struct usb_device *dev) } length = ncfg * sizeof(struct usb_host_config); - dev->config = kmalloc(length, GFP_KERNEL); + dev->config = kzalloc(length, GFP_KERNEL); if (!dev->config) goto err2; - memset(dev->config, 0, length); length = ncfg * sizeof(char *); - dev->rawdescriptors = kmalloc(length, GFP_KERNEL); + dev->rawdescriptors = kzalloc(length, GFP_KERNEL); if (!dev->rawdescriptors) goto err2; - memset(dev->rawdescriptors, 0, length); buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL); if (!buffer) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index ffb2e242b100..942cd437dc48 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -210,10 +210,10 @@ static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, l static struct async *alloc_async(unsigned int numisoframes) { unsigned int assize = sizeof(struct async) + numisoframes * sizeof(struct usb_iso_packet_descriptor); - struct async *as = kmalloc(assize, GFP_KERNEL); + struct async *as = kzalloc(assize, GFP_KERNEL); + if (!as) return NULL; - memset(as, 0, assize); as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL); if (!as->urb) { kfree(as); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index e8f2b8d8f14d..61ef9943757e 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -744,10 +744,9 @@ struct usb_bus *usb_alloc_bus (struct usb_operations *op) { struct usb_bus *bus; - bus = kmalloc (sizeof *bus, GFP_KERNEL); + bus = kzalloc (sizeof *bus, GFP_KERNEL); if (!bus) return NULL; - memset(bus, 0, sizeof(struct usb_bus)); usb_bus_init (bus); bus->op = op; return bus; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6a2ebd89916f..8ba5854e5387 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -865,14 +865,12 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) /* We found a hub */ dev_info (&intf->dev, "USB hub found\n"); - hub = kmalloc(sizeof(*hub), GFP_KERNEL); + hub = kzalloc(sizeof(*hub), GFP_KERNEL); if (!hub) { dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n"); return -ENOMEM; } - memset(hub, 0, sizeof(*hub)); - INIT_LIST_HEAD(&hub->event_list); hub->intfdev = &intf->dev; hub->hdev = hdev; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 5ad0d5e28119..3519f317898e 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1350,7 +1350,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) } for (; n < nintf; ++n) { - new_interfaces[n] = kmalloc( + new_interfaces[n] = kzalloc( sizeof(struct usb_interface), GFP_KERNEL); if (!new_interfaces[n]) { @@ -1391,7 +1391,6 @@ int usb_set_configuration(struct usb_device *dev, int configuration) struct usb_host_interface *alt; cp->interface[i] = intf = new_interfaces[i]; - memset(intf, 0, sizeof(*intf)); intfc = cp->intf_cache[i]; intf->altsetting = intfc->altsetting; intf->num_altsetting = intfc->num_altsetting; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 4eca4904938f..0eefff7bcb3c 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -704,12 +704,10 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) { struct usb_device *dev; - dev = kmalloc(sizeof(*dev), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return NULL; - memset(dev, 0, sizeof(*dev)); - bus = usb_bus_get(bus); if (!bus) { kfree(dev); -- GitLab From 16f16d117c1eb99451e4c73c87546eef05c66790 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 15:41:19 -0400 Subject: [PATCH 0843/1519] [PATCH] USB: Fix maxpacket length for ep0 on root hubs This patch (as591) fixes a rather innocuous bug that has been around for quite a long time: Virtual root hubs should have a maxpacket length of 64 for endpoint 0. I didn't realize it was wrong until I started looking through the endpoint attribute files. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 61ef9943757e..6c7ca5b08cd6 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -130,7 +130,7 @@ static const u8 usb2_rh_dev_descriptor [18] = { 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 0x00, /* __u8 bDeviceSubClass; */ 0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ 0x00, 0x00, /* __le16 idVendor; */ 0x00, 0x00, /* __le16 idProduct; */ @@ -153,7 +153,7 @@ static const u8 usb11_rh_dev_descriptor [18] = { 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 0x00, /* __u8 bDeviceSubClass; */ 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ 0x00, 0x00, /* __le16 idVendor; */ 0x00, 0x00, /* __le16 idProduct; */ -- GitLab From 4f62efe67f077db17dad03a1d4c9665000a3eb45 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 24 Oct 2005 16:24:14 -0400 Subject: [PATCH 0844/1519] [PATCH] usbcore: Fix handling of sysfs strings and other attributes This patch (as592) makes a few small improvements to the way device strings are handled, and it fixes some bugs in a couple of other sysfs attribute routines. (Look at show_configuration_string() to see what I mean.) Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 10 ++++---- drivers/usb/core/hub.c | 22 ++++------------- drivers/usb/core/message.c | 48 ++++++++++++++++++++++++-------------- drivers/usb/core/sysfs.c | 36 ++++++++++++---------------- drivers/usb/core/usb.h | 1 + include/linux/usb.h | 10 ++++---- 6 files changed, 62 insertions(+), 65 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 63f374e62db2..993019500cc3 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -112,8 +112,12 @@ void usb_release_interface_cache(struct kref *ref) struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref); int j; - for (j = 0; j < intfc->num_altsetting; j++) - kfree(intfc->altsetting[j].endpoint); + for (j = 0; j < intfc->num_altsetting; j++) { + struct usb_host_interface *alt = &intfc->altsetting[j]; + + kfree(alt->endpoint); + kfree(alt->string); + } kfree(intfc); } @@ -420,8 +424,6 @@ void usb_destroy_configuration(struct usb_device *dev) struct usb_host_config *cf = &dev->config[c]; kfree(cf->string); - cf->string = NULL; - for (i = 0; i < cf->desc.bNumInterfaces; i++) { if (cf->intf_cache[i]) kref_put(&cf->intf_cache[i]->ref, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8ba5854e5387..1bacb374b007 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1204,21 +1204,6 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) {} #endif -static void get_string(struct usb_device *udev, char **string, int index) -{ - char *buf; - - if (!index) - return; - buf = kmalloc(256, GFP_KERNEL); - if (!buf) - return; - if (usb_string(udev, index, buf, 256) > 0) - *string = buf; - else - kfree(buf); -} - #ifdef CONFIG_USB_OTG #include "otg_whitelist.h" @@ -1257,9 +1242,10 @@ int usb_new_device(struct usb_device *udev) } /* read the standard strings and cache them if present */ - get_string(udev, &udev->product, udev->descriptor.iProduct); - get_string(udev, &udev->manufacturer, udev->descriptor.iManufacturer); - get_string(udev, &udev->serial, udev->descriptor.iSerialNumber); + udev->product = usb_cache_string(udev, udev->descriptor.iProduct); + udev->manufacturer = usb_cache_string(udev, + udev->descriptor.iManufacturer); + udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); /* Tell the world! */ dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, " diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 3519f317898e..644a3d4f12aa 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -787,6 +787,31 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) return err; } +/** + * usb_cache_string - read a string descriptor and cache it for later use + * @udev: the device whose string descriptor is being read + * @index: the descriptor index + * + * Returns a pointer to a kmalloc'ed buffer containing the descriptor string, + * or NULL if the index is 0 or the string could not be read. + */ +char *usb_cache_string(struct usb_device *udev, int index) +{ + char *buf; + char *smallbuf = NULL; + int len; + + if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) { + if ((len = usb_string(udev, index, buf, 256)) > 0) { + if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL) + return buf; + memcpy(smallbuf, buf, len); + } + kfree(buf); + } + return smallbuf; +} + /* * usb_get_device_descriptor - (re)reads the device descriptor (usbcore) * @dev: the device whose device descriptor is being updated @@ -1008,8 +1033,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg (&dev->dev, "unregistering interface %s\n", interface->dev.bus_id); usb_remove_sysfs_intf_files(interface); - kfree(interface->cur_altsetting->string); - interface->cur_altsetting->string = NULL; device_del (&interface->dev); } @@ -1422,12 +1445,9 @@ int usb_set_configuration(struct usb_device *dev, int configuration) } kfree(new_interfaces); - if ((cp->desc.iConfiguration) && - (cp->string == NULL)) { - cp->string = kmalloc(256, GFP_KERNEL); - if (cp->string) - usb_string(dev, cp->desc.iConfiguration, cp->string, 256); - } + if (cp->string == NULL) + cp->string = usb_cache_string(dev, + cp->desc.iConfiguration); /* Now that all the interfaces are set up, register them * to trigger binding of drivers to interfaces. probe() @@ -1437,13 +1457,12 @@ int usb_set_configuration(struct usb_device *dev, int configuration) */ for (i = 0; i < nintf; ++i) { struct usb_interface *intf = cp->interface[i]; - struct usb_interface_descriptor *desc; + struct usb_host_interface *alt = intf->cur_altsetting; - desc = &intf->altsetting [0].desc; dev_dbg (&dev->dev, "adding %s (config #%d, interface %d)\n", intf->dev.bus_id, configuration, - desc->bInterfaceNumber); + alt->desc.bInterfaceNumber); ret = device_add (&intf->dev); if (ret != 0) { dev_err(&dev->dev, @@ -1452,13 +1471,6 @@ int usb_set_configuration(struct usb_device *dev, int configuration) ret); continue; } - if ((intf->cur_altsetting->desc.iInterface) && - (intf->cur_altsetting->string == NULL)) { - intf->cur_altsetting->string = kmalloc(256, GFP_KERNEL); - if (intf->cur_altsetting->string) - usb_string(dev, intf->cur_altsetting->desc.iInterface, - intf->cur_altsetting->string, 256); - } usb_create_sysfs_intf_files (intf); } } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 4cca77cf0c48..edd83e014452 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -249,18 +249,12 @@ static ssize_t show_configuration_string(struct device *dev, { struct usb_device *udev; struct usb_host_config *actconfig; - int len; udev = to_usb_device (dev); actconfig = udev->actconfig; if ((!actconfig) || (!actconfig->string)) return 0; - len = sprintf(buf, actconfig->string, PAGE_SIZE); - if (len < 0) - return 0; - buf[len] = '\n'; - buf[len+1] = 0; - return len+1; + return sprintf(buf, "%s\n", actconfig->string); } static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL); @@ -291,15 +285,9 @@ static ssize_t show_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ - int len; \ \ udev = to_usb_device (dev); \ - len = snprintf(buf, 256, "%s", udev->name); \ - if (len < 0) \ - return 0; \ - buf[len] = '\n'; \ - buf[len+1] = 0; \ - return len+1; \ + return sprintf(buf, "%s\n", udev->name); \ } \ static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); @@ -449,11 +437,11 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev) usb_remove_ep_files(&udev->ep0); sysfs_remove_group(&dev->kobj, &dev_attr_grp); - if (udev->descriptor.iManufacturer) + if (udev->manufacturer) device_remove_file(dev, &dev_attr_manufacturer); - if (udev->descriptor.iProduct) + if (udev->product) device_remove_file(dev, &dev_attr_product); - if (udev->descriptor.iSerialNumber) + if (udev->serial) device_remove_file(dev, &dev_attr_serial); device_remove_file (dev, &dev_attr_configuration); } @@ -535,7 +523,8 @@ static struct attribute_group intf_attr_grp = { .attrs = intf_attrs, }; -static inline void usb_create_intf_ep_files(struct usb_interface *intf) +static inline void usb_create_intf_ep_files(struct usb_interface *intf, + struct usb_device *udev) { struct usb_host_interface *iface_desc; int i; @@ -543,7 +532,7 @@ static inline void usb_create_intf_ep_files(struct usb_interface *intf) iface_desc = intf->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i], - interface_to_usbdev(intf)); + udev); } static inline void usb_remove_intf_ep_files(struct usb_interface *intf) @@ -558,11 +547,16 @@ static inline void usb_remove_intf_ep_files(struct usb_interface *intf) void usb_create_sysfs_intf_files (struct usb_interface *intf) { + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_interface *alt = intf->cur_altsetting; + sysfs_create_group(&intf->dev.kobj, &intf_attr_grp); - if (intf->cur_altsetting->string) + if (alt->string == NULL) + alt->string = usb_cache_string(udev, alt->desc.iInterface); + if (alt->string) device_create_file(&intf->dev, &dev_attr_interface); - usb_create_intf_ep_files(intf); + usb_create_intf_ep_files(intf, udev); } void usb_remove_sysfs_intf_files (struct usb_interface *intf) diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 888dbe443695..1c4a68499dce 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -13,6 +13,7 @@ extern void usb_disable_device (struct usb_device *dev, int skip_ep0); extern int usb_get_device_descriptor(struct usb_device *dev, unsigned int size); +extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); extern void usb_lock_all_devices(void); diff --git a/include/linux/usb.h b/include/linux/usb.h index c500d6b5a16d..748d04385256 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -231,7 +231,7 @@ struct usb_interface_cache { struct usb_host_config { struct usb_config_descriptor desc; - char *string; + char *string; /* iConfiguration string, if present */ /* the interfaces associated with this configuration, * stored in no particular order */ struct usb_interface *interface[USB_MAXINTERFACES]; @@ -351,9 +351,11 @@ struct usb_device { int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ - char *product; - char *manufacturer; - char *serial; /* static strings from the device */ + /* static strings from the device */ + char *product; /* iProduct string, if present */ + char *manufacturer; /* iManufacturer string, if present */ + char *serial; /* iSerialNumber string, if present */ + struct list_head filelist; struct class_device *class_dev; struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */ -- GitLab From db2d55b7f7f11823b8d2e5f0c706c7a264320d1b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 23 Oct 2005 23:04:25 -0700 Subject: [PATCH 0845/1519] [PATCH] USB: fix pm patches with CONFIG_PM off part 1 With CONFIG_PM=n: drivers/built-in.o(.text+0x2a69c): In function `ohci_hub_control': drivers/usb/host/ohci-hub.c:539: undefined reference to `.usb_hcd_resume_root_hub' drivers/built-in.o(.text+0x2b920): In function `ohci_irq': drivers/usb/host/ohci-hcd.c:726: undefined reference to `.usb_hcd_resume_root_hub' Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index a5d92943ff95..24a62a2ff86d 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -351,9 +351,6 @@ extern long usb_calc_bus_time (int speed, int is_input, extern struct usb_bus *usb_alloc_bus (struct usb_operations *); -extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); -extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); - extern void usb_set_device_state(struct usb_device *udev, enum usb_device_state new_state); @@ -376,9 +373,21 @@ extern int usb_find_interface_driver (struct usb_device *dev, #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) #ifdef CONFIG_PM +extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); +extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); extern int hcd_bus_suspend (struct usb_bus *bus); extern int hcd_bus_resume (struct usb_bus *bus); #else +static inline void usb_hcd_suspend_root_hub(struct usb_hcd *hcd) +{ + return; +} + +static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) +{ + return; +} + static inline int hcd_bus_suspend(struct usb_bus *bus) { return 0; -- GitLab From 9a7834d06d553d02cc6e659e94772f69a8b5367f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 23 Oct 2005 23:02:20 -0700 Subject: [PATCH 0846/1519] [PATCH] USB: fix pm patches with CONFIG_PM off part 2 With CONFIG_PM=n: drivers/built-in.o(.text+0x1098c): In function `hub_thread': drivers/usb/core/hub.c:2673: undefined reference to `.dpm_runtime_resume' drivers/built-in.o(.text+0x10998):drivers/usb/core/hub.c:2674: undefined reference to `.dpm_runtime_resume' Please, never ever ever put extern decls into .c files. Use the darn header files :( Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/base/power/power.h | 13 ------------- drivers/usb/core/hub.c | 2 -- include/linux/pm.h | 13 +++++++++++++ 3 files changed, 13 insertions(+), 15 deletions(-) diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 2e700d795cf1..fb3d35a9e101 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -67,9 +67,6 @@ extern int suspend_device(struct device *, pm_message_t); * runtime.c */ -extern int dpm_runtime_suspend(struct device *, pm_message_t); -extern void dpm_runtime_resume(struct device *); - #else /* CONFIG_PM */ @@ -82,14 +79,4 @@ static inline void device_pm_remove(struct device * dev) } -static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state) -{ - return 0; -} - -static inline void dpm_runtime_resume(struct device * dev) -{ - -} - #endif diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1bacb374b007..9660a8909b7c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2652,8 +2652,6 @@ static void hub_events(void) * stub "device" node was never suspended. */ if (i) { - extern void dpm_runtime_resume(struct device *); - dpm_runtime_resume(&hdev->dev); dpm_runtime_resume(&intf->dev); } diff --git a/include/linux/pm.h b/include/linux/pm.h index 83bae1cbe55b..c61d5de837ef 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -243,6 +243,9 @@ extern int device_suspend(pm_message_t state); #define device_may_wakeup(dev) \ (device_can_wakeup(dev) && (dev)->power.should_wakeup) +extern int dpm_runtime_suspend(struct device *, pm_message_t); +extern void dpm_runtime_resume(struct device *); + #else /* !CONFIG_PM */ static inline int device_suspend(pm_message_t state) @@ -253,6 +256,16 @@ static inline int device_suspend(pm_message_t state) #define device_set_wakeup_enable(dev,val) do{}while(0) #define device_may_wakeup(dev) (0) +static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state) +{ + return 0; +} + +static inline void dpm_runtime_resume(struct device * dev) +{ + +} + #endif /* changes to device_may_wakeup take effect on the next pm state change. -- GitLab From 46a0cf81828535fb3c200bc4fffdb8d69f4bf396 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Wed, 26 Oct 2005 19:42:53 +0200 Subject: [PATCH 0847/1519] [PATCH] USB: fix correct wording in drivers/usb/net/KConfig Signed-off-by: Koen Kooi --- drivers/usb/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig index 8c010bb44eb8..efd6ca7e4ac5 100644 --- a/drivers/usb/net/Kconfig +++ b/drivers/usb/net/Kconfig @@ -294,7 +294,7 @@ config USB_NET_ZAURUS This also supports some related device firmware, as used in some PDAs from Olympus and some cell phones from Motorola. - If you install an alternate ROM image, such as the Linux 2.6 based + If you install an alternate image, such as the Linux 2.6 based versions of OpenZaurus, you should no longer need to support this protocol. Only the "eth-fd" or "net_fd" drivers in these devices really need this non-conformant variant of CDC Ethernet (or in -- GitLab From bde621854f1958a6000834c7c089b528118e5a9a Mon Sep 17 00:00:00 2001 From: Martin Hagelin Date: Wed, 26 Oct 2005 21:10:41 +0200 Subject: [PATCH 0848/1519] [PATCH] USB: add new device id to ftdi_sio module This is a patch to get the ELV FHZ1000 Home Automation control device to work with Linux. The patch adds a new device ID to the ftdi_sio driver. It is for kernel version 2.6.13.4. Signed-off-by: Martin Hagelin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 77d54ac39a0e..61204bf7cd78 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -412,6 +412,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, /* * These will probably use user-space drivers. Uncomment them if * you need them or use the user-specified vendor/product module @@ -429,7 +430,6 @@ static struct usb_device_id id_table_combined [] = { /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */ - /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */ -- GitLab From 50260b69bbec383058875de26dbde28b1a6f8d00 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH 0849/1519] [PATCH] USB: add nokia_dku2 driver This driver comes from the gnokii project. Was further cleaned up by me to match recent usb-serial core changes. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 9 ++ drivers/usb/serial/Makefile | 1 + drivers/usb/serial/nokia_dku2.c | 142 ++++++++++++++++++++++++++++++++ 3 files changed, 152 insertions(+) create mode 100644 drivers/usb/serial/nokia_dku2.c diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 9438909e87a5..7b5e8e4ee2bb 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -394,6 +394,15 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. +config USB_SERIAL_NOKIA_DKU2 + tristate "USB Nokia DKU2 Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a Nokia DKU2 device. + + To compile this driver as a module, choose M here: the + module will be called nokia_dku2. + config USB_SERIAL_PL2303 tristate "USB Prolific 2303 Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 6c7cdcc99a9e..55fd461793b7 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o +obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c new file mode 100644 index 000000000000..fad01bef3a64 --- /dev/null +++ b/drivers/usb/serial/nokia_dku2.c @@ -0,0 +1,142 @@ +/* + * Nokia DKU2 USB driver + * + * Copyright (C) 2004 + * Author: C Kemp + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * 20.09.2005 - Matthias Blaesing + * Added short name to device structure to make driver load into kernel 2.6.13 + * + * 20.09.2005 - Matthias Blaesing + * Added usb_deregister to exit code - to allow remove and reinsert of module + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "usb-serial.h" + + +#define NOKIA_VENDOR_ID 0x0421 +#define NOKIA7600_PRODUCT_ID 0x0400 +#define NOKIA6230_PRODUCT_ID 0x040f +#define NOKIA6170_PRODUCT_ID 0x0416 +#define NOKIA6670_PRODUCT_ID 0x041d +#define NOKIA6680_PRODUCT_ID 0x041e +#define NOKIA6230i_PRODUCT_ID 0x0428 + +#define NOKIA_AT_PORT 0x82 +#define NOKIA_FBUS_PORT 0x86 + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.2" +#define DRIVER_AUTHOR "C Kemp" +#define DRIVER_DESC "Nokia DKU2 Driver" + +static struct usb_device_id id_table [] = { + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* The only thing which makes this device different from a generic + * device is that we have to set an alternative configuration to make + * the relevant endpoints available. In 2.6 this is really easy... */ +static int nokia_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int retval = -ENODEV; + + if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) { + /* the AT port */ + dev_info(&serial->dev->dev, "Nokia AT Port:\n"); + retval = 0; + } else if (serial->interface->num_altsetting == 2 && + serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) { + /* the FBUS port */ + dev_info(&serial->dev->dev, "Nokia FBUS Port:\n"); + usb_set_interface(serial->dev, 10, 1); + retval = 0; + } + + return retval; +} + +static struct usb_driver nokia_driver = { + .owner = THIS_MODULE, + .name = "nokia_dku2", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_driver nokia_serial_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "nokia_dku2", + }, + .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver", + .id_table = id_table, + .num_interrupt_in = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .probe = nokia_probe, +}; + +static int __init nokia_init(void) +{ + int retval; + + retval = usb_serial_register(&nokia_serial_driver); + if (retval) + return retval; + + retval = usb_register(&nokia_driver); + if (retval) { + usb_serial_deregister(&nokia_serial_driver); + return retval; + } + + info(DRIVER_VERSION " " DRIVER_AUTHOR); + info(DRIVER_DESC); + + return retval; +} + +static void __exit nokia_exit(void) +{ + usb_deregister(&nokia_driver); + usb_serial_deregister(&nokia_serial_driver); +} + +module_init(nokia_init); +module_exit(nokia_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- GitLab From 4303fc6f055cf1a7ec63c3c3fd777b91b7d576f1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 28 Oct 2005 19:59:31 -0700 Subject: [PATCH 0850/1519] USB: fix up some odd parts due to partial merges Thanks to Andrew for doing the hard work on this. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 +- drivers/usb/host/ehci-pci.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9660a8909b7c..256d9f698715 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1674,7 +1674,7 @@ int usb_suspend_device(struct usb_device *udev) return 0; #endif } - +EXPORT_SYMBOL_GPL(usb_suspend_device); /* * If the USB "suspend" state is in use (rather than "global suspend"), diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 7872469ccbb1..145008853966 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -252,7 +252,7 @@ static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message) (void) usb_suspend_device (hcd->self.root_hub); #else usb_lock_device (hcd->self.root_hub); - (void) ehci_hub_suspend (hcd); + (void) ehci_bus_suspend (hcd); usb_unlock_device (hcd->self.root_hub); #endif @@ -285,7 +285,7 @@ static int ehci_pci_resume (struct usb_hcd *hcd) continue; if (status & (PORT_SUSPEND | PORT_OWNER)) { down (&hcd->self.root_hub->serialize); - retval = ehci_hub_resume (hcd); + retval = ehci_bus_resume (hcd); up (&hcd->self.root_hub->serialize); break; } -- GitLab From e83b860539d0ac1b3cff868178fa79c457e0c21f Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 21 Oct 2005 18:00:48 +0900 Subject: [PATCH 0851/1519] [TCP]: fix tcp_tso_win_divisor documentation The default value for tcp_tso_win_divisor is 3. Signed-off-by: Akinobu Mita Signed-off-by: Arnaldo Carvalho de Melo --- Documentation/networking/ip-sysctl.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index b433c8a27e2d..65895bb51414 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -309,7 +309,7 @@ tcp_tso_win_divisor - INTEGER can be consumed by a single TSO frame. The setting of this parameter is a choice between burstiness and building larger TSO frames. - Default: 8 + Default: 3 tcp_frto - BOOLEAN Enables F-RTO, an enhanced recovery algorithm for TCP retransmission -- GitLab From 360ac8e2f1a38c3497739636c3b702352d1ad0ae Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 25 Oct 2005 15:03:41 -0700 Subject: [PATCH 0852/1519] [ETH]: ether address compare Expose faster ether compare for use by protocols and other driver. And change name to be more consistent with other ether address manipulation routines in same file Signed-off-by: Stephen Hemminger Signed-off-by: Arnaldo Carvalho de Melo --- include/linux/etherdevice.h | 16 ++++++++++++++++ net/ethernet/eth.c | 17 ++--------------- 2 files changed, 18 insertions(+), 15 deletions(-) diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 4522c7186bf3..cc84934f9059 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -104,6 +104,22 @@ static inline void random_ether_addr(u8 *addr) addr [0] &= 0xfe; /* clear multicast bit */ addr [0] |= 0x02; /* set local assignment bit (IEEE802) */ } + +/** + * compare_ether_addr - Compare two Ethernet addresses + * @addr1: Pointer to a six-byte array containing the Ethernet address + * @addr2 Pointer other six-byte array containing the Ethernet address + * + * Compare two ethernet addresses, returns 0 if equal + */ +static inline unsigned compare_ether_addr(const u8 *_a, const u8 *_b) +{ + const u16 *a = (const u16 *) _a; + const u16 *b = (const u16 *) _b; + + BUILD_BUG_ON(ETH_ALEN != 6); + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0; +} #endif /* __KERNEL__ */ #endif /* _LINUX_ETHERDEVICE_H */ diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c index 68a5ca866442..e24577367274 100644 --- a/net/ethernet/eth.c +++ b/net/ethernet/eth.c @@ -146,19 +146,6 @@ int eth_rebuild_header(struct sk_buff *skb) return 0; } -static inline unsigned int compare_eth_addr(const unsigned char *__a, const unsigned char *__b) -{ - const unsigned short *dest = (unsigned short *) __a; - const unsigned short *devaddr = (unsigned short *) __b; - unsigned int res; - - BUILD_BUG_ON(ETH_ALEN != 6); - res = ((dest[0] ^ devaddr[0]) | - (dest[1] ^ devaddr[1]) | - (dest[2] ^ devaddr[2])) != 0; - - return res; -} /* * Determine the packet's protocol ID. The rule here is that we @@ -176,7 +163,7 @@ __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev) eth = eth_hdr(skb); if (*eth->h_dest&1) { - if (!compare_eth_addr(eth->h_dest, dev->broadcast)) + if (!compare_ether_addr(eth->h_dest, dev->broadcast)) skb->pkt_type = PACKET_BROADCAST; else skb->pkt_type = PACKET_MULTICAST; @@ -191,7 +178,7 @@ __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev) */ else if(1 /*dev->flags&IFF_PROMISC*/) { - if (unlikely(compare_eth_addr(eth->h_dest, dev->dev_addr))) + if (unlikely(compare_ether_addr(eth->h_dest, dev->dev_addr))) skb->pkt_type = PACKET_OTHERHOST; } -- GitLab From 9fcc2e8a752f7d3d889114221b67c459557823e9 Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Thu, 27 Oct 2005 15:10:01 -0700 Subject: [PATCH 0853/1519] [IPV4]: Fix issue reported by Coverity in ipv4/fib_frontend.c fib_del_ifaddr() dereferences ifa->ifa_dev, so the code already assumes that ifa->ifa_dev is non-NULL, the check is unnecessary. Signed-off-by: Jayachandran C. Signed-off-by: Arnaldo Carvalho de Melo --- net/ipv4/fib_frontend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index e61bc7177eb1..990633c09dfe 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -591,7 +591,7 @@ static int fib_inetaddr_event(struct notifier_block *this, unsigned long event, break; case NETDEV_DOWN: fib_del_ifaddr(ifa); - if (ifa->ifa_dev && ifa->ifa_dev->ifa_list == NULL) { + if (ifa->ifa_dev->ifa_list == NULL) { /* Last address was deleted from this interface. Disable IP. */ -- GitLab From fb31690fbac6f4055c1765522752e4746759f5de Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 13:15:10 +0100 Subject: [PATCH 0854/1519] [ARM] Ensure machine information structures aren't optimised away Since the machine information structures are now static, the compiler might optimise them away. Mark them with __attribute_used__ to prevent this occuring. Signed-off-by: Russell King --- include/asm-arm/mach/arch.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h index 7273c6fd95b5..eb262e078c46 100644 --- a/include/asm-arm/mach/arch.h +++ b/include/asm-arm/mach/arch.h @@ -50,6 +50,7 @@ struct machine_desc { */ #define MACHINE_START(_type,_name) \ static const struct machine_desc __mach_desc_##_type \ + __attribute_used__ \ __attribute__((__section__(".arch.info.init"))) = { \ .nr = MACH_TYPE_##_type, \ .name = _name, -- GitLab From 8c18fe2562c45180c407872d05857c55c1e5e37b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 13:18:10 +0100 Subject: [PATCH 0855/1519] [ARM] Fix buggy __phys_to_pfn / __pfn_to_phys Macro arguments should _always_ be surrounded by parentheses when used to prevent unexpected problems with operator precedence. Signed-off-by: Russell King --- include/asm-arm/mach/map.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h index 0619522bd926..b338936bde4f 100644 --- a/include/asm-arm/mach/map.h +++ b/include/asm-arm/mach/map.h @@ -27,8 +27,8 @@ struct meminfo; #define MT_ROM 6 #define MT_IXP2000_DEVICE 7 -#define __phys_to_pfn(paddr) (paddr >> PAGE_SHIFT) -#define __pfn_to_phys(pfn) (pfn << PAGE_SHIFT) +#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT) +#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT) extern void create_memmap_holes(struct meminfo *); extern void memtable_init(struct meminfo *); -- GitLab From 57725f0a94435355214977bb9b0e5089bba1b173 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 15:51:14 +0100 Subject: [PATCH 0856/1519] [ARM] Rename 'data' to 'plat' in sa1100 MTD map driver Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 6a8e0caf9fdc..1920bcbc05d7 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -130,7 +130,7 @@ struct sa_subdev_info { char name[16]; struct map_info map; struct mtd_info *mtd; - struct flash_platform_data *data; + struct flash_platform_data *plat; }; struct sa_info { @@ -143,7 +143,7 @@ struct sa_info { static void sa1100_set_vpp(struct map_info *map, int on) { struct sa_subdev_info *subdev = container_of(map, struct sa_subdev_info, map); - subdev->data->set_vpp(on); + subdev->plat->set_vpp(on); } static void sa1100_destroy_subdev(struct sa_subdev_info *subdev) @@ -187,7 +187,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r goto out; } - if (subdev->data->set_vpp) + if (subdev->plat->set_vpp) subdev->map.set_vpp = sa1100_set_vpp; subdev->map.phys = phys; @@ -204,7 +204,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r * Now let's probe for the actual flash. Do it here since * specific machine settings might have been set above. */ - subdev->mtd = do_map_probe(subdev->data->map_name, &subdev->map); + subdev->mtd = do_map_probe(subdev->plat->map_name, &subdev->map); if (subdev->mtd == NULL) { ret = -ENXIO; goto err; @@ -245,7 +245,7 @@ static void sa1100_destroy(struct sa_info *info) } static struct sa_info *__init -sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash) +sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) { struct sa_info *info; int nr, size, i, ret = 0; @@ -288,7 +288,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *flash subdev->map.name = subdev->name; sprintf(subdev->name, "sa1100-%d", i); - subdev->data = flash; + subdev->plat = plat; ret = sa1100_probe_subdev(subdev, res); if (ret) @@ -346,16 +346,16 @@ static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static int __init sa1100_mtd_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - struct flash_platform_data *flash = pdev->dev.platform_data; + struct flash_platform_data *plat = pdev->dev.platform_data; struct mtd_partition *parts; const char *part_type = NULL; struct sa_info *info; int err, nr_parts = 0; - if (!flash) + if (!plat) return -ENODEV; - info = sa1100_setup_mtd(pdev, flash); + info = sa1100_setup_mtd(pdev, plat); if (IS_ERR(info)) { err = PTR_ERR(info); goto out; @@ -372,8 +372,8 @@ static int __init sa1100_mtd_probe(struct device *dev) } else #endif { - parts = flash->parts; - nr_parts = flash->nr_parts; + parts = plat->parts; + nr_parts = plat->nr_parts; part_type = "static"; } -- GitLab From 0d2ef7d73e0b5173af3940139569bebd2375f441 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 15:57:20 +0100 Subject: [PATCH 0857/1519] [ARM] Add support for init/exit methods in sa1100 MTD map driver Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 1920bcbc05d7..50a1d434906a 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -223,7 +223,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r return ret; } -static void sa1100_destroy(struct sa_info *info) +static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *plat) { int i; @@ -242,6 +242,9 @@ static void sa1100_destroy(struct sa_info *info) for (i = info->num_subdev - 1; i >= 0; i--) sa1100_destroy_subdev(&info->subdev[i]); kfree(info); + + if (plat->exit) + plat->exit(); } static struct sa_info *__init @@ -275,6 +278,12 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) memset(info, 0, size); + if (plat->init) { + ret = plat->init(); + if (ret) + goto err; + } + /* * Claim and then map the memory regions. */ @@ -336,7 +345,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) return info; err: - sa1100_destroy(info); + sa1100_destroy(info, plat); out: return ERR_PTR(ret); } @@ -397,8 +406,11 @@ static int __init sa1100_mtd_probe(struct device *dev) static int __exit sa1100_mtd_remove(struct device *dev) { struct sa_info *info = dev_get_drvdata(dev); + struct flash_platform_data *plat = dev->platform_data; + dev_set_drvdata(dev, NULL); - sa1100_destroy(info); + sa1100_destroy(info, plat); + return 0; } -- GitLab From 822e5e72697ce06e4425c17d161b0482c7d9b6d4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 16:03:24 +0100 Subject: [PATCH 0858/1519] [ARM] Fix MTD device/partition destruction We should not delete MTD partitions when we registered a MTD device. Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 50a1d434906a..c38c2c311b8e 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -137,6 +137,7 @@ struct sa_info { struct mtd_partition *parts; struct mtd_info *mtd; int num_subdev; + unsigned int nr_parts; struct sa_subdev_info subdev[0]; }; @@ -228,8 +229,12 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla int i; if (info->mtd) { - del_mtd_partitions(info->mtd); - + if (info->nr_parts == 0) + del_mtd_device(info->mtd); +#ifdef CONFIG_MTD_PARTITIONS + else + del_mtd_partitions(info->mtd); +#endif #ifdef CONFIG_MTD_CONCAT if (info->mtd != info->subdev[0].mtd) mtd_concat_destroy(info->mtd); @@ -396,6 +401,8 @@ static int __init sa1100_mtd_probe(struct device *dev) add_mtd_partitions(info->mtd, parts, nr_parts); } + info->nr_parts = nr_parts; + dev_set_drvdata(dev, info); err = 0; -- GitLab From 14e66f767f5e8d023e098b475dc24ddc9a5dbdfd Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 16:08:31 +0100 Subject: [PATCH 0859/1519] [ARM] Allow MTD device name to be passed via platform data Allow SA1100 devices to pass the name of the flash device to the SA1100 map driver. Signed-off-by: Russell King --- arch/arm/mach-sa1100/generic.c | 2 ++ drivers/mtd/maps/sa1100-flash.c | 6 +++--- include/asm-arm/mach/flash.h | 2 ++ 3 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 93619497779c..f94b0fbcdcc8 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include "generic.h" @@ -283,6 +284,7 @@ static struct platform_device sa11x0mtd_device = { void sa11x0_set_flash_data(struct flash_platform_data *flash, struct resource *res, int nr) { + flash->name = "sa1100"; sa11x0mtd_device.dev.platform_data = flash; sa11x0mtd_device.resource = res; sa11x0mtd_device.num_resources = nr; diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index c38c2c311b8e..acf01ef9b575 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -301,7 +301,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) break; subdev->map.name = subdev->name; - sprintf(subdev->name, "sa1100-%d", i); + sprintf(subdev->name, "%s-%d", plat->name, i); subdev->plat = plat; ret = sa1100_probe_subdev(subdev, res); @@ -323,7 +323,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) * otherwise fail. Either way, it'll be called "sa1100". */ if (info->num_subdev == 1) { - strcpy(info->subdev[0].name, "sa1100"); + strcpy(info->subdev[0].name, plat->name); info->mtd = info->subdev[0].mtd; ret = 0; } else if (info->num_subdev > 1) { @@ -336,7 +336,7 @@ sa1100_setup_mtd(struct platform_device *pdev, struct flash_platform_data *plat) cdev[i] = info->subdev[i].mtd; info->mtd = mtd_concat_create(cdev, info->num_subdev, - "sa1100"); + plat->name); if (info->mtd == NULL) ret = -ENXIO; #else diff --git a/include/asm-arm/mach/flash.h b/include/asm-arm/mach/flash.h index a92887d4b2cb..cd57436d9874 100644 --- a/include/asm-arm/mach/flash.h +++ b/include/asm-arm/mach/flash.h @@ -14,6 +14,7 @@ struct mtd_partition; /* * map_name: the map probe function name + * name: flash device name (eg, as used with mtdparts=) * width: width of mapped device * init: method called at driver/device initialisation * exit: method called at driver/device removal @@ -23,6 +24,7 @@ struct mtd_partition; */ struct flash_platform_data { const char *map_name; + const char *name; unsigned int width; int (*init)(void); void (*exit)(void); -- GitLab From 183e1a349466a1b90430a58f3efad25a3e555cb2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 16:09:59 +0100 Subject: [PATCH 0860/1519] [ARM] Add support for SA1100 Jornada flash device support This got dropped from the SA1100 flash driver a while back and never added to the platform support file. Add it back. Signed-off-by: Russell King --- arch/arm/mach-sa1100/jornada720.c | 64 +++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 9c363bfcf310..89af0c831e8f 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -8,6 +8,8 @@ #include #include #include +#include +#include #include #include @@ -16,6 +18,7 @@ #include #include +#include #include #include @@ -108,6 +111,66 @@ static void __init jornada720_map_io(void) sa1100_register_uart(1, 1); } +static struct mtd_partition jornada720_partitions[] = { + { + .name = "JORNADA720 boot firmware", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "JORNADA720 kernel", + .size = 0x000c0000, + .offset = 0x00040000, + }, { + .name = "JORNADA720 params", + .size = 0x00040000, + .offset = 0x00100000, + }, { + .name = "JORNADA720 initrd", + .size = 0x00100000, + .offset = 0x00140000, + }, { + .name = "JORNADA720 root cramfs", + .size = 0x00300000, + .offset = 0x00240000, + }, { + .name = "JORNADA720 usr cramfs", + .size = 0x00800000, + .offset = 0x00540000, + }, { + .name = "JORNADA720 usr local", + .size = 0, /* will expand to the end of the flash */ + .offset = 0x00d00000, + } +}; + +static void jornada720_set_vpp(int vpp) +{ + if (vpp) + PPSR |= 0x80; + else + PPSR &= ~0x80; + PPDR |= 0x80; +} + +static struct flash_platform_data jornada720_flash_data = { + .map_name = "cfi_probe", + .set_vpp = jornada720_set_vpp, + .parts = jornada720_partitions, + .nr_parts = ARRAY_SIZE(jornada720_partitions), +}; + +static struct resource jornada720_flash_resource = { + .start = SA1100_CS0_PHYS, + .end = SA1100_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static void __init jornada720_mach_init(void) +{ + sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1); +} + MACHINE_START(JORNADA720, "HP Jornada 720") /* Maintainer: Michael Gernoth */ .phys_ram = 0xc0000000, @@ -117,4 +180,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720") .map_io = jornada720_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, + .init_machine = jornada720_mach_init, MACHINE_END -- GitLab From 13bfb34c10fae6016710f5f070043c8b94b40583 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 29 Oct 2005 16:14:08 +0100 Subject: [PATCH 0861/1519] [ARM] Fix Assabet reboot with SA1100 MTD map driver Unfortunately, some devices forgot to reset the flash on reboot. Arrange for the map driver to suspend & resume the flash to ensure that it is in a sane state before rebooting. Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index acf01ef9b575..c81bec7b14d5 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -440,9 +440,17 @@ static int sa1100_mtd_resume(struct device *dev) info->mtd->resume(info->mtd); return 0; } + +static void sa1100_mtd_shutdown(struct device *dev) +{ + struct sa_info *info = dev_get_drvdata(dev); + if (info && info->mtd->suspend(info->mtd) == 0) + info->mtd->resume(info->mtd); +} #else #define sa1100_mtd_suspend NULL #define sa1100_mtd_resume NULL +#define sa1100_mtd_shutdown NULL #endif static struct device_driver sa1100_mtd_driver = { @@ -452,6 +460,7 @@ static struct device_driver sa1100_mtd_driver = { .remove = __exit_p(sa1100_mtd_remove), .suspend = sa1100_mtd_suspend, .resume = sa1100_mtd_resume, + .shutdown = sa1100_mtd_shutdown, }; static int __init sa1100_mtd_init(void) -- GitLab From 931db7d6880027bb2b6b0cb78a488ab1486e28b7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 29 Oct 2005 16:28:26 +0100 Subject: [PATCH 0862/1519] [ARM] 3050/1: remove ixp2000_reg_write erratum #66 workaround Patch from Lennert Buytenhek The workaround that we do for avoiding triggering ixp2400 erratum #66 involves mapping I/O pages using XCB=101 instead of XCB=000 so that we prevent the I/O signal to the gasket from being asserted (which can cause data corruption.) But XCB=101 mappings are write-buffered while mappings using XCB=000 are not, which is why if we use XCB=101 mappings we do a readback for every CSR store in an attempt to make sure that the store has been pushed out of the xscale core and the gasket. Unfortunately, there are two issues with this: - we do a readback for every CSR store, which is wrong, because the register we are writing to might have unwanted side-effects on read, for example, in the case of the scratchpad ring enqueue/dequeue registers; and - the readback is totally ineffective in the way we currently do it, because we just issue a load but do not issue any instruction that depends on the return value of that load, so the xscale core does not wait for the load to complete before continuing. See this linux-arm-kernel mailing list post for further information: http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2005-September/031314.html This means that my ixp2400 boxes have been running for many months without a working readback in ixp2000_reg_write, without any apparent adverse effects. Two of them have been running for a week now with the actual readback deleted from ixp2000_reg_write, also without any apparent ill effects. So, because in its current form it does more harm than good, the readback in ixp2000_reg_write should simply be killed, as the patch below does. Signed-off-by: Lennert Buytenhek Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/platform.h | 29 ------------------------- 1 file changed, 29 deletions(-) diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index abdcf51bd283..aabeef2454dd 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -15,39 +15,10 @@ #ifndef __ASSEMBLY__ -/* - * The IXP2400 B0 silicon contains an erratum (#66) that causes writes - * to on-chip I/O register to not complete fully. What this means is - * that if you have a write to on-chip I/O followed by a back-to-back - * read or write, the first write will happen twice. OR...if it's - * not a back-to-back transaction, the read or write will generate - * incorrect data. - * - * The official work around for this is to set the on-chip I/O regions - * as XCB=101 and then force a read-back from the register. - * - */ -#if defined(CONFIG_ARCH_ENP2611) || defined(CONFIG_ARCH_IXDP2400) || defined(CONFIG_ARCH_IXDP2401) - -#include /* Pickup local_irq_ functions */ - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - unsigned long dummy; - unsigned long flags; - - local_irq_save(flags); - *((volatile unsigned long *)reg) = val; - barrier(); - dummy = *((volatile unsigned long *)reg); - local_irq_restore(flags); -} -#else static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) { *((volatile unsigned long *)reg) = val; } -#endif /* IXDP2400 || IXDP2401 */ #define ixp2000_reg_read(reg) (*((volatile unsigned long *)reg)) /* -- GitLab From ecbea7a2dae94092db9566bcd1f38535e9b3cde9 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 29 Oct 2005 16:28:27 +0100 Subject: [PATCH 0863/1519] [ARM] 3051/1: turn ixp2000_reg_read into an inline function Patch from Lennert Buytenhek Turn ixp2000_reg_read into an inline function. Signed-off-by: Lennert Buytenhek Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/platform.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index aabeef2454dd..6e5b6a955abe 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -15,11 +15,15 @@ #ifndef __ASSEMBLY__ +static inline unsigned long ixp2000_reg_read(volatile void *reg) +{ + return *((volatile unsigned long *)reg); +} + static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) { *((volatile unsigned long *)reg) = val; } -#define ixp2000_reg_read(reg) (*((volatile unsigned long *)reg)) /* * Boards may multiplex different devices on the 2nd channel of -- GitLab From b4a1f67fbfb848ded8cf0c6c305224534144ab2d Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 29 Oct 2005 16:28:28 +0100 Subject: [PATCH 0864/1519] [ARM] 3053/1: introduce ixp2000_reg_wrb (ixp2000_reg_write plus readback) Patch from Lennert Buytenhek Introduce ixp2000_reg_wrb, which is a variant of ixp2000_reg_write that does a readback from the target register, to make sure that the write has been flushed out of the write buffer. Unlike the previous (ineffective) readback in ixp2000_reg_write, this readback is followed by an instruction that depends on the value of the readback so that the CPU actually stalls until the readback has completed. Signed-off-by: Lennert Buytenhek Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/platform.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index 6e5b6a955abe..a66317ab2071 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -25,6 +25,31 @@ static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) *((volatile unsigned long *)reg) = val; } +/* + * On the IXP2400, we can't use XCB=000 due to chip bugs. We use + * XCB=101 instead, but that makes all I/O accesses bufferable. This + * is not a problem in general, but we do have to be slightly more + * careful because I/O writes are no longer automatically flushed out + * of the write buffer. + * + * In cases where we want to make sure that a write has been flushed + * out of the write buffer before we proceed, for example when masking + * a device interrupt before re-enabling IRQs in CPSR, we can use this + * function, ixp2000_reg_wrb, which performs a write, a readback, and + * issues a dummy instruction dependent on the value of the readback + * (mov rX, rX) to make sure that the readback has completed before we + * continue. + */ +static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) +{ + unsigned long dummy; + + *((volatile unsigned long *)reg) = val; + + dummy = *((volatile unsigned long *)reg); + __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); +} + /* * Boards may multiplex different devices on the 2nd channel of * the slowport interface that each need different configuration -- GitLab From 1a47ebc0d971fbc47cd859a09956f7c7d001f5fd Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 29 Oct 2005 16:28:29 +0100 Subject: [PATCH 0865/1519] [ARM] 3059/1: fix XIP support Patch from Nicolas Pitre Fix XIP support after recent bootmem code refactoring. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/init.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index f4496813615a..fd079ff1fc53 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -363,20 +363,16 @@ static void __init bootmem_init(struct meminfo *mi) memcpy(&meminfo, mi, sizeof(meminfo)); -#ifdef CONFIG_XIP_KERNEL -#error needs fixing - p->pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PMD_MASK); - p->virtual = (unsigned long)&_stext & PMD_MASK; - p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK; - p->type = MT_ROM; - p ++; -#endif - /* * Clear out all the mappings below the kernel image. - * FIXME: what about XIP? */ - for (addr = 0; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE) + pmd_clear(pmd_off_k(addr)); +#ifdef CONFIG_XIP_KERNEL + /* The XIP kernel is mapped in the module area -- skip over it */ + addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK; +#endif + for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); /* @@ -435,6 +431,18 @@ static void __init devicemaps_init(struct machine_desc *mdesc) for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); + /* + * Map the kernel if it is XIP. + * It is always first in the modulearea. + */ +#ifdef CONFIG_XIP_KERNEL + map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK); + map.virtual = MODULE_START; + map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK; + map.type = MT_ROM; + create_mapping(&map); +#endif + /* * Map the cache flushing regions. */ -- GitLab From c514e58cb8eac0d21f4ab5011df75a09eb5edd50 Mon Sep 17 00:00:00 2001 From: Kenneth Tan Date: Sat, 29 Oct 2005 16:32:14 +0100 Subject: [PATCH 0866/1519] [ARM] 3022/1: Missing peripheral devices memory mapping definition for IXP46X processor Patch from Kenneth Tan Defining IXP46X peripheral devices memory mapping definitions that have been missed out: o Peripheral virtual base address is being adjusted to allow more headroom to add extra peripheral device addresses o Peripheral size is being increased to address the above needs o Virtual address of expansion bus and PCI configuration register needs to be adjusted as new peripheral device memory space is overlapping with their virtual address space Signed-off-by: Kenneth Tan Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp4xx/ixp4xx-regs.h | 75 +++++++++++++++-------- 1 file changed, 49 insertions(+), 26 deletions(-) diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h index 004696a95bdb..2b149ed59149 100644 --- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h +++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h @@ -36,11 +36,11 @@ * * 0x6000000 0x00004000 ioremap'd QMgr * - * 0xC0000000 0x00001000 0xffbfe000 PCI CFG + * 0xC0000000 0x00001000 0xffbff000 PCI CFG * - * 0xC4000000 0x00001000 0xffbfd000 EXP CFG + * 0xC4000000 0x00001000 0xffbfe000 EXP CFG * - * 0xC8000000 0x0000C000 0xffbf2000 On-Chip Peripherals + * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals */ /* @@ -52,22 +52,22 @@ * Expansion BUS Configuration registers */ #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000) +#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) /* * PCI Config registers */ #define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFE000) +#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFF000) #define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) /* * Peripheral space */ #define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBF2000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x0000C000) +#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBEB000) +#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) /* * Debug UART @@ -115,25 +115,48 @@ /* * Peripheral Space Register Region Base Addresses */ -#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000) -#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000) -#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000) -#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000) -#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000) -#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000) -#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000) -#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000) -#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000) - -#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000) -#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000) -#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000) -#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) -#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) -#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) -#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) -#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) -#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) +#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000) +#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000) +#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000) +#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000) +#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000) +#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000) +#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000) +#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000) +#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000) +#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000) +#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000) +#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000) +/* ixp46X only */ +#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000) +#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000) +#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000) +#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000) +#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000) +#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000) +#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000) + + +#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000) +#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000) +#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000) +#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) +#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) +#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) +#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000) +#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000) +#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000) +#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) +#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) +#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) +/* ixp46X only */ +#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000) +#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000) +#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000) +#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000) +#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000) +#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000) +#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000) /* * Constants to make it easy to access Interrupt Controller registers -- GitLab From 47e627ce83b6df9f4bb8e4b0a4dde1c5d7a4c929 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 29 Oct 2005 18:18:42 +0900 Subject: [PATCH 0867/1519] [PATCH] blk: fix merge bug in as-iosched as-iosched deals with aliased requests differently from other ioscheds. It links together aliased requests using rq->queuelist instead of spilling alises to dispatch queue like other ioscheds do. Requests linked in this way cannot be merged. Unfortunately, generic q->last_merge handling patch didn't take this into account and q->last_merge could be set to an aliased request resulting in Badness, corrupt list and eventually panic. This explicitly marks aliased requests to be unmergeable. Signed-off-by: Tejun Heo Signed-off-by: Linus Torvalds --- drivers/block/as-iosched.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c index 4081c36c8c19..564172234819 100644 --- a/drivers/block/as-iosched.c +++ b/drivers/block/as-iosched.c @@ -1344,6 +1344,7 @@ as_add_aliased_request(struct as_data *ad, struct as_rq *arq, struct as_rq *alia * Don't want to have to handle merges. */ as_del_arq_hash(arq); + arq->request->flags |= REQ_NOMERGE; } /* -- GitLab From 8d027de54c77d38eedc9b331c7a2a39807d34691 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sat, 29 Oct 2005 19:37:40 +0400 Subject: [PATCH 0868/1519] [PATCH] fix ->signal->live leak in copy_process() exit_signal() (called from copy_process's error path) should decrement ->signal->live, otherwise forking process will miss 'group_dead' in do_exit(). Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds --- kernel/signal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/signal.c b/kernel/signal.c index f2b96b08fb44..6904bbbfe116 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -406,6 +406,8 @@ void __exit_signal(struct task_struct *tsk) void exit_signal(struct task_struct *tsk) { + atomic_dec(&tsk->signal->live); + write_lock_irq(&tasklist_lock); __exit_signal(tsk); write_unlock_irq(&tasklist_lock); -- GitLab From 7533624527b9afa5585ca43ba534758052d848e5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:36:27 +0100 Subject: [PATCH 0869/1519] [PATCH] s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/s2io.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index d303d162974f..62d5041845e3 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3045,7 +3045,7 @@ int s2io_set_swapper(nic_t * sp) int wait_for_msix_trans(nic_t *nic, int i) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int ret = 0, cnt = 0; @@ -3066,7 +3066,7 @@ int wait_for_msix_trans(nic_t *nic, int i) void restore_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int i; @@ -3084,7 +3084,7 @@ void restore_xmsi_data(nic_t *nic) void store_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64, addr, data; int i; @@ -3107,7 +3107,7 @@ void store_xmsi_data(nic_t *nic) int s2io_enable_msi(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u16 msi_ctrl, msg_val; struct config_param *config = &nic->config; struct net_device *dev = nic->dev; @@ -3157,7 +3157,7 @@ int s2io_enable_msi(nic_t *nic) int s2io_enable_msi_x(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 tx_mat, rx_mat; u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; -- GitLab From 4b4a5eaedfc098d825d4c34cad1f1115802512b7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:38:44 +0100 Subject: [PATCH 0870/1519] [PATCH] sata_sil24 iomem annotations and fixes trivial iomem annotations + missing memcpy_fromio() caught by those Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/scsi/sata_sil24.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 32d730bd5bb6..51855d3bac64 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -220,8 +220,8 @@ struct sil24_port_priv { /* ap->host_set->private_data */ struct sil24_host_priv { - void *host_base; /* global controller control (128 bytes @BAR0) */ - void *port_base; /* port registers (4 * 8192 bytes @BAR2) */ + void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ + void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ }; static u8 sil24_check_status(struct ata_port *ap); @@ -349,10 +349,12 @@ static struct ata_port_info sil24_port_info[] = { static inline void sil24_update_tf(struct ata_port *ap) { struct sil24_port_priv *pp = ap->private_data; - void *port = (void *)ap->ioaddr.cmd_addr; - struct sil24_prb *prb = port; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct sil24_prb __iomem *prb = port; + u8 fis[6 * 4]; - ata_tf_from_fis(prb->fis, &pp->tf); + memcpy_fromio(fis, prb->fis, 6 * 4); + ata_tf_from_fis(fis, &pp->tf); } static u8 sil24_check_status(struct ata_port *ap) @@ -376,9 +378,9 @@ static int sil24_scr_map[] = { static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) { - void *scr_addr = (void *)ap->ioaddr.scr_addr; + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void *addr; + void __iomem *addr; addr = scr_addr + sil24_scr_map[sc_reg] * 4; return readl(scr_addr + sil24_scr_map[sc_reg] * 4); } @@ -387,9 +389,9 @@ static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) { - void *scr_addr = (void *)ap->ioaddr.scr_addr; + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void *addr; + void __iomem *addr; addr = scr_addr + sil24_scr_map[sc_reg] * 4; writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); } @@ -454,7 +456,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); @@ -467,7 +469,7 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static int __sil24_reset_controller(void *port) +static int __sil24_reset_controller(void __iomem *port) { int cnt; u32 tmp; @@ -493,7 +495,7 @@ static void sil24_reset_controller(struct ata_port *ap) { printk(KERN_NOTICE DRV_NAME " ata%u: resetting controller...\n", ap->id); - if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr)) + if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr)) printk(KERN_ERR DRV_NAME " ata%u: failed to reset controller\n", ap->id); } @@ -527,7 +529,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); struct sil24_port_priv *pp = ap->private_data; - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); @@ -574,7 +576,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; u32 slot_stat; slot_stat = readl(port + PORT_SLOT_STAT); @@ -689,7 +691,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port_info *pinfo = &sil24_port_info[board_id]; struct ata_probe_ent *probe_ent = NULL; struct sil24_host_priv *hpriv = NULL; - void *host_base = NULL, *port_base = NULL; + void __iomem *host_base = NULL; + void __iomem *port_base = NULL; int i, rc; if (!printed_version++) @@ -771,7 +774,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) writel(0, host_base + HOST_CTRL); for (i = 0; i < probe_ent->n_ports; i++) { - void *port = port_base + i * PORT_REGS_SIZE; + void __iomem *port = port_base + i * PORT_REGS_SIZE; unsigned long portu = (unsigned long)port; u32 tmp; int cnt; -- GitLab From 2d3c0b7bedfd7a8e1870a046a434bd467e7c5349 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:46:03 +0100 Subject: [PATCH 0871/1519] [PATCH] missing include in infiniband use of IS_ERR/PTR_ERR in infiniband/core/agent.c, without a portable chain of includes pulling err.h (breaks on a bunch of platforms). Signed-off-by: Al Viro Acked-by: Roland Dreier Signed-off-by: Linus Torvalds --- drivers/infiniband/core/agent.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/core/agent.h b/drivers/infiniband/core/agent.h index c5f3cfec942a..86d72fab37b0 100644 --- a/drivers/infiniband/core/agent.h +++ b/drivers/infiniband/core/agent.h @@ -39,6 +39,7 @@ #ifndef __AGENT_H_ #define __AGENT_H_ +#include #include extern int ib_agent_port_open(struct ib_device *device, int port_num); -- GitLab From f6b52e85a5d022008fe9f99eab7c9f41f155e3cd Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 07:06:59 +0100 Subject: [PATCH 0872/1519] [PATCH] arguments out of order in class_device_create() call (s390) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/s390/char/vmlogrdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index a107fec4457a..b2d75de144c6 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -787,8 +787,8 @@ vmlogrdr_register_device(struct vmlogrdr_priv_t *priv) { return ret; } priv->class_device = class_device_create( - NULL, vmlogrdr_class, + NULL, MKDEV(vmlogrdr_major, priv->minor_num), dev, "%s", dev->bus_id ); -- GitLab From 9d86b7d37018c917837477dd4501d44bf8f3f98c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 07:08:49 +0100 Subject: [PATCH 0873/1519] [PATCH] missing bits in sparkspkr conversion Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/input/misc/sparcspkr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c index 5778220a18d2..29d97b12be7a 100644 --- a/drivers/input/misc/sparcspkr.c +++ b/drivers/input/misc/sparcspkr.c @@ -143,7 +143,7 @@ static int __init init_isa_beep(struct sparc_isa_device *isa_dev) sparcspkr_dev->name = "Sparc ISA Speaker"; sparcspkr_dev->event = isa_spkr_event; - input_register_device(&sparcspkr_dev); + input_register_device(sparcspkr_dev); return 0; } -- GitLab From 943eae03143790c71cf42fe13529f1b74ceb0266 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 07:32:07 +0100 Subject: [PATCH 0874/1519] [PATCH] missing exports of do_settimeofday() variants frv, sh64, ia64 and sparc64 do not have do_settimeofday() exported (the last two are using variant in kernel/time.c). Exports added to match the rest of architectures. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/frv/kernel/time.c | 1 + arch/sh64/kernel/time.c | 1 + kernel/time.c | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c index 8d6558b00e44..f43b734482e3 100644 --- a/arch/frv/kernel/time.c +++ b/arch/frv/kernel/time.c @@ -221,6 +221,7 @@ int do_settimeofday(struct timespec *tv) clock_was_set(); return 0; } +EXPORT_SYMBOL(do_settimeofday); /* * Scheduler clock - returns current time in nanosec units. diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c index f4a62a10053c..43e395a14f49 100644 --- a/arch/sh64/kernel/time.c +++ b/arch/sh64/kernel/time.c @@ -253,6 +253,7 @@ int do_settimeofday(struct timespec *tv) return 0; } +EXPORT_SYMBOL(do_settimeofday); static int set_rtc_time(unsigned long nowtime) { diff --git a/kernel/time.c b/kernel/time.c index 40c2410ac99a..a3c2100470e1 100644 --- a/kernel/time.c +++ b/kernel/time.c @@ -532,6 +532,7 @@ int do_settimeofday (struct timespec *tv) clock_was_set(); return 0; } +EXPORT_SYMBOL(do_settimeofday); void do_gettimeofday (struct timeval *tv) { -- GitLab From 32b32c2c3566b206988fa30336ec6534759823b5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 11:49:33 +0100 Subject: [PATCH 0875/1519] [PATCH] amikbd fix it's input_allocate_device(), not input_dev_allocate()... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/input/keyboard/amikbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c index 3d63bc1ad322..4c8fb1f8631f 100644 --- a/drivers/input/keyboard/amikbd.c +++ b/drivers/input/keyboard/amikbd.c @@ -199,7 +199,7 @@ static int __init amikbd_init(void) if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb")) return -EBUSY; - amikbd_dev = input_dev_allocate(); + amikbd_dev = input_allocate_device(); if (!amikbd_dev) { printk(KERN_ERR "amikbd: not enough memory for input device\n"); release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100); -- GitLab From 018a2cdf1e633497bb4f01eb86a7cbffa611776d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 11:56:13 +0100 Subject: [PATCH 0876/1519] [PATCH] idmouse cleanup and overflow fix switched to simple_read_from_buffer(), killed broken use of min(). Incidentally, that use of min() had been fixed once, only to be reintroduced in commit 4244f72436ab77c3c29a6447af81734ab3925d85: [PATCH] USB: upgrade of the idmouse driver [snip] - if (count > IMGSIZE - *ppos) - count = IMGSIZE - *ppos; + count = min ((loff_t)count, IMGSIZE - (*ppos)); Note the lovely use of cast to shut the warning about misuse of min() up... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/usb/misc/idmouse.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 3944a55ed74c..1dc3e0f73014 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -319,20 +319,8 @@ static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count return -ENODEV; } - if (*ppos >= IMGSIZE) { - up (&dev->sem); - return 0; - } - - count = min ((loff_t)count, IMGSIZE - (*ppos)); - - if (copy_to_user (buffer, dev->bulk_in_buffer + *ppos, count)) { - result = -EFAULT; - } else { - result = count; - *ppos += count; - } - + result = simple_read_from_buffer(buffer, count, ppos, + dev->bulk_in_buffer, IMGSIZE); /* unlock the device */ up(&dev->sem); return result; -- GitLab From a6e0eb3791dcefc6dd4db53a23de5cfb18fe9a97 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 12:02:00 +0100 Subject: [PATCH 0877/1519] [PATCH] bluetooth hidp is broken on s390 Bluetooth HIDP selects INPUT and it really needs it to be there - module depends on input core. And input core is never built on s390... Marked as broken on s390, for now; if somebody has better ideas, feel free to fix it and remove dependency... Signed-off-by: Al Viro Acked-by: Marcel Holtmann Signed-off-by: Linus Torvalds --- net/bluetooth/hidp/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig index 4e958f7d9418..edfea772fb67 100644 --- a/net/bluetooth/hidp/Kconfig +++ b/net/bluetooth/hidp/Kconfig @@ -1,6 +1,6 @@ config BT_HIDP tristate "HIDP protocol support" - depends on BT && BT_L2CAP + depends on BT && BT_L2CAP && (BROKEN || !S390) select INPUT help HIDP (Human Interface Device Protocol) is a transport layer -- GitLab From 942b6f62164cf8822dd03b1569777f4663d1abd7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 12:07:11 +0100 Subject: [PATCH 0878/1519] [PATCH] type fix in arm/boot/compressed/misc.c spot the typo... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/arm/boot/compressed/misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 23434b56786a..50f13eec6cd7 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -30,7 +30,7 @@ unsigned int __machine_arch_type; #define putstr icedcc_putstr #define putc icedcc_putc -extern void idedcc_putc(int ch); +extern void icedcc_putc(int ch); static void icedcc_putstr(const char *ptr) -- GitLab From ac19bff25b6834d858274406a686f2227dd8489d Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 29 Oct 2005 13:58:21 -0400 Subject: [PATCH 0879/1519] [libata] ensure ->tf_read() hook reads Status and Error registers We want ->tf_read() to get a complete snapshot of all taskfile registers, without requiring the callers to manually call ata_chk_status() and ata_chk_err() themselves. This also fixes a minor bug in sata_vsc where the lower bits of the feature register were incorrectly placed in the HOB (high order bits) portion of struct ata_taskfile. --- drivers/scsi/libata-core.c | 4 ++++ drivers/scsi/pdc_adma.c | 2 +- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_svw.c | 22 ++++++++++++++++------ drivers/scsi/sata_vsc.c | 20 ++++++++++++++------ 5 files changed, 36 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f53d7b8ac33f..56c81f0aa1d9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -370,6 +370,8 @@ static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; + tf->command = ata_check_status(ap); + tf->feature = ata_chk_err(ap); tf->nsect = inb(ioaddr->nsect_addr); tf->lbal = inb(ioaddr->lbal_addr); tf->lbam = inb(ioaddr->lbam_addr); @@ -402,6 +404,8 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; + tf->command = ata_check_status(ap); + tf->feature = ata_chk_err(ap); tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index 7999817915c3..af99feb9d237 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -490,7 +490,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) if (qc && (!(qc->tf.ctl & ATA_NIEN))) { /* check main status, clearing INTRQ */ - u8 status = ata_chk_status(ap); + u8 status = ata_check_status(ap); if ((status & ATA_BUSY)) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 250dafa6bc36..1aaf3304d397 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -433,7 +433,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) if (qc && (!(qc->tf.ctl & ATA_NIEN))) { /* check main status, clearing INTRQ */ - u8 status = ata_chk_status(ap); + u8 status = ata_check_status(ap); if ((status & ATA_BUSY)) continue; DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index e0f9570bc6dd..46208f52d0e1 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -84,6 +84,8 @@ /* Port stride */ #define K2_SATA_PORT_OFFSET 0x100 +static u8 k2_stat_check_status(struct ata_port *ap); + static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { @@ -136,16 +138,24 @@ static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; - u16 nsect, lbal, lbam, lbah; + u16 nsect, lbal, lbam, lbah, feature; - nsect = tf->nsect = readw(ioaddr->nsect_addr); - lbal = tf->lbal = readw(ioaddr->lbal_addr); - lbam = tf->lbam = readw(ioaddr->lbam_addr); - lbah = tf->lbah = readw(ioaddr->lbah_addr); + tf->command = k2_stat_check_status(ap); tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); + + tf->feature = feature; + tf->nsect = nsect; + tf->lbal = lbal; + tf->lbam = lbam; + tf->lbah = lbah; if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_feature = readw(ioaddr->error_addr) >> 8; + tf->hob_feature = feature >> 8; tf->hob_nsect = nsect >> 8; tf->hob_lbal = lbal >> 8; tf->hob_lbam = lbam >> 8; diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 5af05fdf8544..54273e0063c7 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -153,16 +153,24 @@ static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; - u16 nsect, lbal, lbam, lbah; + u16 nsect, lbal, lbam, lbah, feature; - nsect = tf->nsect = readw(ioaddr->nsect_addr); - lbal = tf->lbal = readw(ioaddr->lbal_addr); - lbam = tf->lbam = readw(ioaddr->lbam_addr); - lbah = tf->lbah = readw(ioaddr->lbah_addr); + tf->command = ata_check_status(ap); tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); + + tf->feature = feature; + tf->nsect = nsect; + tf->lbal = lbal; + tf->lbam = lbam; + tf->lbah = lbah; if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_feature = readb(ioaddr->error_addr); + tf->hob_feature = feature >> 8; tf->hob_nsect = nsect >> 8; tf->hob_lbal = lbal >> 8; tf->hob_lbam = lbam >> 8; -- GitLab From 57f3bda88a5e5a2810016820a932cb82931dcb1c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 28 Oct 2005 20:37:23 -0700 Subject: [PATCH 0880/1519] [PATCH] libata-core cleanups (updated) libata-core cleanups: - use kzalloc() instead of kmalloc() + memset(); - use one exit path in ata_device_add(); Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 56c81f0aa1d9..b1b1c6f01419 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4258,11 +4258,10 @@ int ata_device_add(const struct ata_probe_ent *ent) DPRINTK("ENTER\n"); /* alloc a container for our list of ATA ports (buses) */ - host_set = kmalloc(sizeof(struct ata_host_set) + + host_set = kzalloc(sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)), GFP_KERNEL); if (!host_set) return 0; - memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *))); spin_lock_init(&host_set->lock); host_set->dev = dev; @@ -4302,10 +4301,8 @@ int ata_device_add(const struct ata_probe_ent *ent) count++; } - if (!count) { - kfree(host_set); - return 0; - } + if (!count) + goto err_free_ret; /* obtain irq, that is shared between channels */ if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, @@ -4363,6 +4360,7 @@ int ata_device_add(const struct ata_probe_ent *ent) ata_host_remove(host_set->ports[i], 1); scsi_host_put(host_set->ports[i]->host); } +err_free_ret: kfree(host_set); VPRINTK("EXIT, returning 0\n"); return 0; @@ -4472,15 +4470,13 @@ ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) { struct ata_probe_ent *probe_ent; - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); if (!probe_ent) { printk(KERN_ERR DRV_NAME "(%s): out of memory\n", kobject_name(&(dev->kobj))); return NULL; } - memset(probe_ent, 0, sizeof(*probe_ent)); - INIT_LIST_HEAD(&probe_ent->node); probe_ent->dev = dev; -- GitLab From 2ab540becd1bcf9c6886370fd8c67e56dd1c9f3a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:38:44 +0100 Subject: [PATCH 0881/1519] [PATCH] sata_sil24 iomem annotations and fixes trivial iomem annotations + missing memcpy_fromio() caught by those Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 32d730bd5bb6..51855d3bac64 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -220,8 +220,8 @@ struct sil24_port_priv { /* ap->host_set->private_data */ struct sil24_host_priv { - void *host_base; /* global controller control (128 bytes @BAR0) */ - void *port_base; /* port registers (4 * 8192 bytes @BAR2) */ + void __iomem *host_base; /* global controller control (128 bytes @BAR0) */ + void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ }; static u8 sil24_check_status(struct ata_port *ap); @@ -349,10 +349,12 @@ static struct ata_port_info sil24_port_info[] = { static inline void sil24_update_tf(struct ata_port *ap) { struct sil24_port_priv *pp = ap->private_data; - void *port = (void *)ap->ioaddr.cmd_addr; - struct sil24_prb *prb = port; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct sil24_prb __iomem *prb = port; + u8 fis[6 * 4]; - ata_tf_from_fis(prb->fis, &pp->tf); + memcpy_fromio(fis, prb->fis, 6 * 4); + ata_tf_from_fis(fis, &pp->tf); } static u8 sil24_check_status(struct ata_port *ap) @@ -376,9 +378,9 @@ static int sil24_scr_map[] = { static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) { - void *scr_addr = (void *)ap->ioaddr.scr_addr; + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void *addr; + void __iomem *addr; addr = scr_addr + sil24_scr_map[sc_reg] * 4; return readl(scr_addr + sil24_scr_map[sc_reg] * 4); } @@ -387,9 +389,9 @@ static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) { - void *scr_addr = (void *)ap->ioaddr.scr_addr; + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { - void *addr; + void __iomem *addr; addr = scr_addr + sil24_scr_map[sc_reg] * 4; writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); } @@ -454,7 +456,7 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); @@ -467,7 +469,7 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static int __sil24_reset_controller(void *port) +static int __sil24_reset_controller(void __iomem *port) { int cnt; u32 tmp; @@ -493,7 +495,7 @@ static void sil24_reset_controller(struct ata_port *ap) { printk(KERN_NOTICE DRV_NAME " ata%u: resetting controller...\n", ap->id); - if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr)) + if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr)) printk(KERN_ERR DRV_NAME " ata%u: failed to reset controller\n", ap->id); } @@ -527,7 +529,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); struct sil24_port_priv *pp = ap->private_data; - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); @@ -574,7 +576,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - void *port = (void *)ap->ioaddr.cmd_addr; + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; u32 slot_stat; slot_stat = readl(port + PORT_SLOT_STAT); @@ -689,7 +691,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port_info *pinfo = &sil24_port_info[board_id]; struct ata_probe_ent *probe_ent = NULL; struct sil24_host_priv *hpriv = NULL; - void *host_base = NULL, *port_base = NULL; + void __iomem *host_base = NULL; + void __iomem *port_base = NULL; int i, rc; if (!printed_version++) @@ -771,7 +774,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) writel(0, host_base + HOST_CTRL); for (i = 0; i < probe_ent->n_ports; i++) { - void *port = port_base + i * PORT_REGS_SIZE; + void __iomem *port = port_base + i * PORT_REGS_SIZE; unsigned long portu = (unsigned long)port; u32 tmp; int cnt; -- GitLab From f9a5f7d3f3319aac02a7a36a2fea10bd33c3d16a Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 29 Oct 2005 15:09:26 +0200 Subject: [PATCH 0882/1519] [PATCH] drivers/net/tg3: Use the DMA_{32,64}BIT_MASK constants This one from my DMA_{32,64}BIT_MASK series did not seem to make it through to upstream. Use the DMA_{32,64}BIT_MASK constants from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() This patch includes dma-mapping.h explicitly because it caused errors on some architectures otherwise. See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser Signed-off-by: Jeff Garzik --- drivers/net/tg3.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index b547233ad9f7..1828a6bf8458 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -37,6 +37,7 @@ #include #include #include +#include #include @@ -10522,17 +10523,17 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, } /* Configure DMA attributes. */ - err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL); + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); if (!err) { pci_using_dac = 1; - err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL); + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); if (err < 0) { printk(KERN_ERR PFX "Unable to obtain 64 bit DMA " "for consistent allocations\n"); goto err_out_free_res; } } else { - err = pci_set_dma_mask(pdev, 0xffffffffULL); + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { printk(KERN_ERR PFX "No usable DMA configuration, " "aborting.\n"); -- GitLab From eef55ac7bf16669cb022db30143d0a6d8cb1f5e6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 29 Oct 2005 06:36:27 +0100 Subject: [PATCH 0883/1519] [PATCH] s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 5ea897714a14..3f5e93aad5c7 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3044,7 +3044,7 @@ int s2io_set_swapper(nic_t * sp) int wait_for_msix_trans(nic_t *nic, int i) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int ret = 0, cnt = 0; @@ -3065,7 +3065,7 @@ int wait_for_msix_trans(nic_t *nic, int i) void restore_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64; int i; @@ -3083,7 +3083,7 @@ void restore_xmsi_data(nic_t *nic) void store_xmsi_data(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 val64, addr, data; int i; @@ -3106,7 +3106,7 @@ void store_xmsi_data(nic_t *nic) int s2io_enable_msi(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u16 msi_ctrl, msg_val; struct config_param *config = &nic->config; struct net_device *dev = nic->dev; @@ -3156,7 +3156,7 @@ int s2io_enable_msi(nic_t *nic) int s2io_enable_msi_x(nic_t *nic) { - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + XENA_dev_config_t __iomem *bar0 = nic->bar0; u64 tx_mat, rx_mat; u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; -- GitLab From e71180f3689e00c5a1095925352a72dacdd62e34 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Sat, 29 Oct 2005 13:31:39 +0100 Subject: [PATCH 0884/1519] [PATCH] prism54: Free skb after disabling interrupts The dev_kfree_skb in islpci_eth_transmit happens while irqs are still disabled, so either dev_kfree_skb_irq needs to be used or the skb needs to be freed after irqs have been enabled again. This patch should fix it. Signed-off-by: Patrick McHardy Signed-off-by: Daniel Drake Signed-off-by: Jeff Garzik --- drivers/net/wireless/prism54/islpci_eth.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 0975dd4ed77d..3b49efa37ee5 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -241,12 +241,10 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) return 0; drop_free: - /* free the skbuf structure before aborting */ - dev_kfree_skb(skb); - skb = NULL; - priv->statistics.tx_dropped++; spin_unlock_irqrestore(&priv->slock, flags); + dev_kfree_skb(skb); + skb = NULL; return err; } -- GitLab From b59a9504cb93db7fae31e60760725d48652a1fc3 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Sat, 4 Dec 2004 21:35:05 +0000 Subject: [PATCH 0885/1519] De-optimize and decomplicate the spurious interrupt handler. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 5eb429137e06..5e9a44168681 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -128,28 +128,25 @@ FEXPORT(syscall_exit_work) /* * Common spurious interrupt handler. */ - .text - .align 5 LEAF(spurious_interrupt) /* * Someone tried to fool us by sending an interrupt but we * couldn't find a cause for it. */ + PTR_LA t1, irq_err_count #ifdef CONFIG_SMP - lui t1, %hi(irq_err_count) -1: ll t0, %lo(irq_err_count)(t1) +1: ll t0, (t1) addiu t0, 1 - sc t0, %lo(irq_err_count)(t1) + sc t0, (t1) #if R10000_LLSC_WAR beqzl t0, 1b #else beqz t0, 1b #endif #else - lui t1, %hi(irq_err_count) - lw t0, %lo(irq_err_count)(t1) + lw t0, (t1) addiu t0, 1 - sw t0, %lo(irq_err_count)(t1) + sw t0, (t1) #endif j ret_from_irq END(spurious_interrupt) -- GitLab From 69903d6500c73af8329a5fba7153b0d50748981c Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Wed, 8 Dec 2004 10:32:45 +0000 Subject: [PATCH 0886/1519] Fix typos and formatting. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/kernel/genex.S | 10 +++++----- arch/mips/lib/csum_partial_copy.c | 8 ++++---- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index e7f6c1b90806..e5021c758ef0 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -82,7 +82,7 @@ NESTED(except_vec3_r4000, 0, sp) li k0, 14<<2 beq k1, k0, handle_vcei #ifdef CONFIG_64BIT - dsll k1, k1, 1 + dsll k1, k1, 1 #endif .set pop PTR_L k0, exception_handlers(k1) @@ -90,17 +90,17 @@ NESTED(except_vec3_r4000, 0, sp) /* * Big shit, we now may have two dirty primary cache lines for the same - * physical address. We can savely invalidate the line pointed to by + * physical address. We can safely invalidate the line pointed to by * c0_badvaddr because after return from this exception handler the * load / store will be re-executed. */ handle_vced: - DMFC0 k0, CP0_BADVADDR + MFC0 k0, CP0_BADVADDR li k1, -4 # Is this ... and k0, k1 # ... really needed? mtc0 zero, CP0_TAGLO - cache Index_Store_Tag_D,(k0) - cache Hit_Writeback_Inv_SD,(k0) + cache Index_Store_Tag_D, (k0) + cache Hit_Writeback_Inv_SD, (k0) #ifdef CONFIG_PROC_FS PTR_LA k0, vced_count lw k1, (k0) diff --git a/arch/mips/lib/csum_partial_copy.c b/arch/mips/lib/csum_partial_copy.c index ffed0a6a1c16..2f26ff99c715 100644 --- a/arch/mips/lib/csum_partial_copy.c +++ b/arch/mips/lib/csum_partial_copy.c @@ -16,8 +16,8 @@ /* * copy while checksumming, otherwise like csum_partial */ -unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *dst, - int len, unsigned int sum) +unsigned int csum_partial_copy_nocheck(const unsigned char *src, + unsigned char *dst, int len, unsigned int sum) { /* * It's 2:30 am and I don't feel like doing it real ... @@ -33,8 +33,8 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char * * Copy from userspace and compute checksum. If we catch an exception * then zero the rest of the buffer. */ -unsigned int csum_partial_copy_from_user (const unsigned char *src, unsigned char *dst, - int len, unsigned int sum, int *err_ptr) +unsigned int csum_partial_copy_from_user (const unsigned char *src, + unsigned char *dst, int len, unsigned int sum, int *err_ptr) { int missing; -- GitLab From c264852726dde251a0c09ec22f61a9be8b0db68b Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Fri, 10 Dec 2004 12:56:33 +0000 Subject: [PATCH 0887/1519] Remove unused arguments from preempt_{start,stop}/local_irq_{en,dis}able. Don't clobber the preloaded TI_FLAGS in a2 needlessly. Unexport local functions. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 5e9a44168681..be0354a14e26 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -19,11 +19,11 @@ #include #ifdef CONFIG_PREEMPT - .macro preempt_stop reg=t0 + .macro preempt_stop .endm #else - .macro preempt_stop reg=t0 - local_irq_disable \reg + .macro preempt_stop + local_irq_disable .endm #define resume_kernel restore_all #endif @@ -37,17 +37,17 @@ FEXPORT(ret_from_irq) andi t0, t0, KU_USER beqz t0, resume_kernel -FEXPORT(resume_userspace) - local_irq_disable t0 # make sure we dont miss an +resume_userspace: + local_irq_disable # make sure we dont miss an # interrupt setting need_resched # between sampling and return LONG_L a2, TI_FLAGS($28) # current->work - andi a2, _TIF_WORK_MASK # (ignoring syscall_trace) - bnez a2, work_pending + andi t0, a2, _TIF_WORK_MASK # (ignoring syscall_trace) + bnez t0, work_pending j restore_all #ifdef CONFIG_PREEMPT -ENTRY(resume_kernel) +resume_kernel: lw t0, TI_PRE_COUNT($28) bnez t0, restore_all need_resched: @@ -59,10 +59,10 @@ need_resched: beqz t0, restore_all li t0, PREEMPT_ACTIVE sw t0, TI_PRE_COUNT($28) - local_irq_enable t0 + local_irq_enable jal schedule sw zero, TI_PRE_COUNT($28) - local_irq_disable t0 + local_irq_disable b need_resched #endif @@ -88,13 +88,13 @@ FEXPORT(restore_partial) # restore partial frame RESTORE_SP_AND_RET .set at -FEXPORT(work_pending) - andi t0, a2, _TIF_NEED_RESCHED +work_pending: + andi t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS beqz t0, work_notifysig work_resched: jal schedule - local_irq_disable t0 # make sure need_resched and + local_irq_disable # make sure need_resched and # signals dont change between # sampling and return LONG_L a2, TI_FLAGS($28) @@ -113,11 +113,10 @@ work_notifysig: # deal with pending signals and FEXPORT(syscall_exit_work_partial) SAVE_STATIC -FEXPORT(syscall_exit_work) - LONG_L t0, TI_FLAGS($28) - li t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT - and t0, t1 - beqz t0, work_pending # trace bit is set +syscall_exit_work: + li t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT + and t0, a2 # a2 is preloaded with TI_FLAGS + beqz t0, work_pending # trace bit set? local_irq_enable # could let do_syscall_trace() # call schedule() instead move a0, sp -- GitLab From 0964ce24d091a1d3dc7f667e1b107ab77d4325e6 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Thu, 23 Dec 2004 08:21:39 +0000 Subject: [PATCH 0888/1519] Move the invalid pmd and pte tables from .data to .bss. Fix alignment. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/kernel/head.S | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 2a1b45d66f04..124c27e908f4 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -200,19 +200,13 @@ NESTED(smp_bootstrap, 16, sp) .comm fw_arg2, SZREG, SZREG .comm fw_arg3, SZREG, SZREG - .macro page name, order=0 - .globl \name -\name: .size \name, (_PAGE_SIZE << \order) - .org . + (_PAGE_SIZE << \order) - .type \name, @object + .macro page name, order + .comm \name, (_PAGE_SIZE << \order), (_PAGE_SIZE << \order) .endm - .data - .align PAGE_SHIFT - /* - * ... but on 64-bit we've got three-level pagetables with a - * slightly different layout ... + * On 64-bit we've got three-level pagetables with a slightly + * different layout ... */ page swapper_pg_dir, _PGD_ORDER #ifdef CONFIG_64BIT -- GitLab From b188ffe876382ecc009ceb4fe033fd6ec7ba4ede Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Dec 2004 07:49:43 +0000 Subject: [PATCH 0889/1519] Fix build with SMP disabled and preemption enabled. Signed-off-by: Ralf Baechle --- arch/mips/kernel/gdb-stub.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c index d3fd1ab14274..7c46b336c7db 100644 --- a/arch/mips/kernel/gdb-stub.c +++ b/arch/mips/kernel/gdb-stub.c @@ -637,15 +637,18 @@ static struct gdb_bp_save async_bp; * and only one can be active at a time. */ extern spinlock_t smp_call_lock; + void set_async_breakpoint(unsigned long *epc) { /* skip breaking into userland */ if ((*epc & 0x80000000) == 0) return; +#ifdef CONFIG_SMP /* avoid deadlock if someone is make IPC */ if (spin_is_locked(&smp_call_lock)) return; +#endif async_bp.addr = *epc; *epc = (unsigned long)async_breakpoint; -- GitLab From 8c93650890a33318263880dec36603a6d5749b7e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Dec 2004 09:09:19 +0000 Subject: [PATCH 0890/1519] Dummy ISA DMA functions for systems that don't have ISA but share drivers with ISA such as legacy free PCI. Signed-off-by: Ralf Baechle --- arch/mips/kernel/dma-no-isa.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 arch/mips/kernel/dma-no-isa.c diff --git a/arch/mips/kernel/dma-no-isa.c b/arch/mips/kernel/dma-no-isa.c new file mode 100644 index 000000000000..6df8b07741e3 --- /dev/null +++ b/arch/mips/kernel/dma-no-isa.c @@ -0,0 +1,28 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 by Ralf Baechle + * + * Dummy ISA DMA functions for systems that don't have ISA but share drivers + * with ISA such as legacy free PCI. + */ +#include +#include +#include + +DEFINE_SPINLOCK(dma_spin_lock); + +int request_dma(unsigned int dmanr, const char * device_id) +{ + return -EINVAL; +} + +void free_dma(unsigned int dmanr) +{ +} + +EXPORT_SYMBOL(dma_spin_lock); +EXPORT_SYMBOL(request_dma); +EXPORT_SYMBOL(free_dma); -- GitLab From c83cfc9c9477d0bc0e0a1ba29dfc58e0d42b2faf Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 Jun 2005 13:56:30 +0000 Subject: [PATCH 0891/1519] Get rid of early_init. There's more need to make this form of initialization actually useful and as is certainly unmergable with upstream. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/setup.c | 6 +---- arch/mips/cobalt/setup.c | 4 +-- arch/mips/ddb5xxx/ddb5074/setup.c | 4 +-- arch/mips/ddb5xxx/ddb5476/setup.c | 4 +-- arch/mips/ddb5xxx/ddb5477/setup.c | 6 +---- arch/mips/dec/setup.c | 4 +-- arch/mips/galileo-boards/ev96100/setup.c | 4 +-- arch/mips/gt64120/ev64120/setup.c | 4 +-- arch/mips/gt64120/momenco_ocelot/setup.c | 4 +-- arch/mips/ite-boards/generic/it8172_setup.c | 4 +-- arch/mips/jazz/setup.c | 4 +-- arch/mips/jmr3927/rbhma3100/setup.c | 7 ++---- arch/mips/kernel/setup.c | 28 ++------------------- arch/mips/kernel/vmlinux.lds.S | 6 ----- arch/mips/lasat/setup.c | 6 +---- arch/mips/mips-boards/atlas/atlas_setup.c | 8 +++--- arch/mips/mips-boards/generic/pci.c | 8 ++---- arch/mips/mips-boards/malta/malta_setup.c | 8 +++--- arch/mips/mips-boards/sead/sead_setup.c | 2 -- arch/mips/momentum/jaguar_atx/setup.c | 6 +---- arch/mips/momentum/ocelot_3/setup.c | 6 +---- arch/mips/momentum/ocelot_c/setup.c | 4 +-- arch/mips/momentum/ocelot_g/setup.c | 6 +---- arch/mips/pci/pci-lasat.c | 6 +++-- arch/mips/pmc-sierra/yosemite/setup.c | 6 +---- arch/mips/sgi-ip22/ip22-setup.c | 6 +---- arch/mips/sgi-ip27/ip27-init.c | 6 +---- arch/mips/sgi-ip32/ip32-setup.c | 6 +---- arch/mips/sibyte/swarm/setup.c | 6 +---- arch/mips/sni/setup.c | 6 +---- arch/mips/tx4927/common/tx4927_setup.c | 4 --- arch/mips/vr41xx/common/init.c | 14 ++++++----- arch/mips/vr41xx/nec-cmbvr4133/setup.c | 5 +--- include/asm-mips/mips-boards/generic.h | 6 +++++ 34 files changed, 53 insertions(+), 161 deletions(-) diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index eff89e109ce6..c1e7d2dcc190 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -57,7 +57,7 @@ extern void au1xxx_time_init(void); extern void au1xxx_timer_setup(struct irqaction *irq); extern void set_cpuspec(void); -static int __init au1x00_setup(void) +void __init plat_setup(void) { struct cpu_spec *sp; char *argptr; @@ -153,12 +153,8 @@ static int __init au1x00_setup(void) au_sync(); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S); au_writel(0, SYS_TOYTRIM); - - return 0; } -early_initcall(au1x00_setup); - #if defined(CONFIG_64BIT_PHYS_ADDR) /* This routine should be valid for all Au1x based boards */ phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index 6b4737e425ed..f8138c15a535 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -89,7 +89,7 @@ static struct pci_controller cobalt_pci_controller = { .io_offset = 0x00001000UL - GT64111_IO_BASE }; -static void __init cobalt_setup(void) +void __init plat_setup(void) { unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0); int i; @@ -125,8 +125,6 @@ static void __init cobalt_setup(void) #endif } -early_initcall(cobalt_setup); - /* * Prom init. We read our one and only communication with the firmware. * Grab the amount of installed memory diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c index a73a5978d550..11535be265b9 100644 --- a/arch/mips/ddb5xxx/ddb5074/setup.c +++ b/arch/mips/ddb5xxx/ddb5074/setup.c @@ -85,7 +85,7 @@ static void __init ddb_time_init(void) -static void __init ddb5074_setup(void) +void __init plat_setup(void) { set_io_port_base(NILE4_PCI_IO_BASE); isa_slot_offset = NILE4_PCI_MEM_BASE; @@ -106,8 +106,6 @@ static void __init ddb5074_setup(void) panic_timeout = 180; } -early_initcall(ddb5074_setup); - #define USE_NILE4_SERIAL 0 #if USE_NILE4_SERIAL diff --git a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c index 71531f8146ea..f4e480a74edf 100644 --- a/arch/mips/ddb5xxx/ddb5476/setup.c +++ b/arch/mips/ddb5xxx/ddb5476/setup.c @@ -124,7 +124,7 @@ static struct { static void ddb5476_board_init(void); -static void __init ddb5476_setup(void) +void __init plat_setup(void) { set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE)); @@ -158,8 +158,6 @@ static void __init ddb5476_setup(void) ddb5476_board_init(); } -early_initcall(ddb5476_setup); - /* * We don't trust bios. We essentially does hardware re-initialization * as complete as possible, as far as we know we can safely do. diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c index d62f5a789b05..81163353c4a8 100644 --- a/arch/mips/ddb5xxx/ddb5477/setup.c +++ b/arch/mips/ddb5xxx/ddb5477/setup.c @@ -170,7 +170,7 @@ static void ddb5477_board_init(void); extern struct pci_controller ddb5477_ext_controller; extern struct pci_controller ddb5477_io_controller; -static int ddb5477_setup(void) +void __init plat_setup(void) { /* initialize board - we don't trust the loader */ ddb5477_board_init(); @@ -193,12 +193,8 @@ static int ddb5477_setup(void) register_pci_controller (&ddb5477_ext_controller); register_pci_controller (&ddb5477_io_controller); - - return 0; } -early_initcall(ddb5477_setup); - static void __init ddb5477_board_init(void) { /* ----------- setup PDARs ------------ */ diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index 6a69309baf40..534a7792a7f6 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -128,7 +128,7 @@ void __init dec_be_init(void) extern void dec_time_init(void); extern void dec_timer_setup(struct irqaction *); -static void __init decstation_setup(void) +void __init plat_setup(void) { board_be_init = dec_be_init; board_time_init = dec_time_init; @@ -141,8 +141,6 @@ static void __init decstation_setup(void) _machine_power_off = dec_machine_power_off; } -early_initcall(decstation_setup); - /* * Machine-specific initialisation for KN01, aka DS2100 (aka Pmin) * or DS3100 (aka Pmax). diff --git a/arch/mips/galileo-boards/ev96100/setup.c b/arch/mips/galileo-boards/ev96100/setup.c index 28bd908c6d55..78dbb18edeb8 100644 --- a/arch/mips/galileo-boards/ev96100/setup.c +++ b/arch/mips/galileo-boards/ev96100/setup.c @@ -55,7 +55,7 @@ extern void mips_reboot_setup(void); unsigned char mac_0_1[12]; -static void __init ev96100_setup(void) +void __init plat_setup(void) { unsigned int config = read_c0_config(); unsigned int status = read_c0_status(); @@ -142,8 +142,6 @@ static void __init ev96100_setup(void) tmp = GT_READ(GT_PCI0_CFGDATA_OFS); } -early_initcall(ev96100_setup); - unsigned short get_gt_devid(void) { u32 gt_devid; diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c index dba0961400cc..98b5a96cc039 100644 --- a/arch/mips/gt64120/ev64120/setup.c +++ b/arch/mips/gt64120/ev64120/setup.c @@ -69,7 +69,7 @@ unsigned long __init prom_free_prom_memory(void) */ extern void gt64120_time_init(void); -static void __init ev64120_setup(void) +void __init plat_setup(void) { _machine_restart = galileo_machine_restart; _machine_halt = galileo_machine_halt; @@ -79,8 +79,6 @@ static void __init ev64120_setup(void) set_io_port_base(KSEG1); } -early_initcall(ev64120_setup); - const char *get_system_type(void) { return "Galileo EV64120A"; diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c index d610f8c17c81..0d07c33112d0 100644 --- a/arch/mips/gt64120/momenco_ocelot/setup.c +++ b/arch/mips/gt64120/momenco_ocelot/setup.c @@ -150,7 +150,7 @@ void PMON_v2_setup() gt64120_base = 0xe0000000; } -static void __init momenco_ocelot_setup(void) +void __init plat_setup(void) { void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache); unsigned int tmpword; @@ -307,8 +307,6 @@ static void __init momenco_ocelot_setup(void) GT_WRITE(GT_DEV_B3_OFS, 0xfef73); } -early_initcall(momenco_ocelot_setup); - extern int rm7k_tcache_enabled; /* * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache() diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c index a5f6d84bc181..062429dd7ca0 100644 --- a/arch/mips/ite-boards/generic/it8172_setup.c +++ b/arch/mips/ite-boards/generic/it8172_setup.c @@ -105,7 +105,7 @@ void __init it8172_init_ram_resource(unsigned long memsize) it8172_resources.ram.end = memsize; } -static void __init it8172_setup(void) +void __init plat_setup(void) { unsigned short dsr; char *argptr; @@ -251,8 +251,6 @@ static void __init it8172_setup(void) #endif /* CONFIG_IT8172_SCR1 */ } -early_initcall(it8172_setup); - #ifdef CONFIG_SERIO_I8042 /* * According to the ITE Special BIOS Note for waking up the diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index fccb06fe209d..044df9d4ab7c 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -50,7 +50,7 @@ static struct resource jazz_io_resources[] = { { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY }, }; -static void __init jazz_setup(void) +void __init plat_setup(void) { int i; @@ -97,5 +97,3 @@ static void __init jazz_setup(void) vdma_init(); } - -early_initcall(jazz_setup); diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 32039bb2f440..d9f7a9989de5 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -193,7 +193,7 @@ static void jmr3927_board_init(void); extern struct resource pci_io_resource; extern struct resource pci_mem_resource; -static void __init jmr3927_setup(void) +void __init plat_setup(void) { char *argptr; @@ -274,9 +274,6 @@ static void __init jmr3927_setup(void) #endif } -early_initcall(jmr3927_setup); - - static void tx3927_setup(void); #ifdef CONFIG_PCI @@ -335,7 +332,7 @@ static void __init jmr3927_board_init(void) jmr3927_io_dipsw()); } -static void __init tx3927_setup(void) +void __init plat_setup(void) { int i; diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 12b531c295c4..6fc51b298304 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -510,31 +510,7 @@ static inline void resource_init(void) #undef MAXMEM #undef MAXMEM_PFN -static int __initdata earlyinit_debug; - -static int __init earlyinit_debug_setup(char *str) -{ - earlyinit_debug = 1; - return 1; -} -__setup("earlyinit_debug", earlyinit_debug_setup); - -extern initcall_t __earlyinitcall_start, __earlyinitcall_end; - -static void __init do_earlyinitcalls(void) -{ - initcall_t *call, *start, *end; - - start = &__earlyinitcall_start; - end = &__earlyinitcall_end; - - for (call = start; call < end; call++) { - if (earlyinit_debug) - printk("calling earlyinitcall 0x%p\n", *call); - - (*call)(); - } -} +extern void plat_setup(void); void __init setup_arch(char **cmdline_p) { @@ -551,7 +527,7 @@ void __init setup_arch(char **cmdline_p) #endif /* call board setup routine */ - do_earlyinitcalls(); + plat_setup(); strlcpy(command_line, arcs_cmdline, sizeof(command_line)); strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE); diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 482ac310c937..ff345f2c42c2 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -96,12 +96,6 @@ SECTIONS .init.setup : { *(.init.setup) } __setup_end = .; - .early_initcall.init : { - __earlyinitcall_start = .; - *(.initcall.early1.init) - } - __earlyinitcall_end = .; - __initcall_start = .; .initcall.init : { *(.initcall1.init) diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index f2604fab9a99..dcd819d57dae 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -155,7 +155,7 @@ void __init serial_init(void) } #endif -static int __init lasat_setup(void) +void __init plat_setup(void) { int i; lasat_misc = &lasat_misc_info[mips_machtype]; @@ -185,8 +185,4 @@ static int __init lasat_setup(void) change_c0_status(ST0_BEV,0); prom_printf("Lasat specific initialization complete\n"); - - return 0; } - -early_initcall(lasat_setup); diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c index 0a1dd9bbc02e..625843b30bed 100644 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ b/arch/mips/mips-boards/atlas/atlas_setup.c @@ -50,8 +50,10 @@ const char *get_system_type(void) return "MIPS Atlas"; } -static int __init atlas_setup(void) +void __init plat_setup(void) { + mips_pcibios_init(); + ioport_resource.end = 0x7fffffff; serial_init (); @@ -64,12 +66,8 @@ static int __init atlas_setup(void) board_time_init = mips_time_init; board_timer_setup = mips_timer_setup; rtc_get_time = mips_rtc_get_time; - - return 0; } -early_initcall(atlas_setup); - static void __init serial_init(void) { #ifdef CONFIG_SERIAL_8250 diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c index 92c34bda02ae..5dadedffba13 100644 --- a/arch/mips/mips-boards/generic/pci.c +++ b/arch/mips/mips-boards/generic/pci.c @@ -109,7 +109,7 @@ static struct pci_controller msc_controller = { .io_offset = 0x00000000UL, }; -static int __init pcibios_init(void) +void __init mips_pcibios_init(void) { struct pci_controller *controller; @@ -150,14 +150,10 @@ static int __init pcibios_init(void) controller = &msc_controller; break; default: - return 1; + return; } ioport_resource.end = controller->io_resource->end; register_pci_controller (controller); - - return 0; } - -early_initcall(pcibios_init); diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index df6db6419ae9..2209e8a9de34 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -111,10 +111,12 @@ void __init fd_activate(void) } #endif -static int __init malta_setup(void) +void __init plat_setup(void) { unsigned int i; + mips_pcibios_init(); + /* Request I/O space for devices used on the Malta board. */ for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) request_resource(&ioport_resource, standard_io_resources+i); @@ -224,8 +226,4 @@ static int __init malta_setup(void) board_time_init = mips_time_init; board_timer_setup = mips_timer_setup; rtc_get_time = mips_rtc_get_time; - - return 0; } - -early_initcall(malta_setup); diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index 29892b88a4fc..de90bec5505e 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -57,8 +57,6 @@ static void __init sead_setup(void) mips_reboot_setup(); } -early_initcall(sead_setup); - static void __init serial_init(void) { #ifdef CONFIG_SERIAL_8250 diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 90288cf2b1e0..768bf4406452 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -351,7 +351,7 @@ static __init int __init ja_pci_init(void) arch_initcall(ja_pci_init); -static int __init momenco_jaguar_atx_setup(void) +void __init plat_setup(void) { unsigned int tmpword; @@ -467,8 +467,4 @@ static int __init momenco_jaguar_atx_setup(void) } #endif - - return 0; } - -early_initcall(momenco_jaguar_atx_setup); diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index ce2efcbab7aa..a7803e08f9db 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -307,7 +307,7 @@ static __init int __init ja_pci_init(void) arch_initcall(ja_pci_init); -static int __init momenco_ocelot_3_setup(void) +void __init plat_setup(void) { unsigned int tmpword; @@ -391,8 +391,4 @@ static int __init momenco_ocelot_3_setup(void) /* Support for 128 MB memory */ add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM); - - return 0; } - -early_initcall(momenco_ocelot_3_setup); diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index 844ddd06349b..ce70fc96f160 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -222,7 +222,7 @@ void momenco_time_init(void) rtc_set_time = m48t37y_set_time; } -static void __init momenco_ocelot_c_setup(void) +void __init plat_setup(void) { unsigned int tmpword; @@ -340,8 +340,6 @@ static void __init momenco_ocelot_c_setup(void) } } -early_initcall(momenco_ocelot_c_setup); - #ifndef CONFIG_64BIT /* This needs to be one of the first initcalls, because no I/O port access can work before this */ diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c index 38a78ab8c830..6336751391c3 100644 --- a/arch/mips/momentum/ocelot_g/setup.c +++ b/arch/mips/momentum/ocelot_g/setup.c @@ -160,7 +160,7 @@ static void __init setup_l3cache(unsigned long size) printk("Done\n"); } -static int __init momenco_ocelot_g_setup(void) +void __init plat_setup(void) { void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache); unsigned int tmpword; @@ -240,12 +240,8 @@ static int __init momenco_ocelot_g_setup(void) /* FIXME: Fix up the DiskOnChip mapping */ MV_WRITE(0x468, 0xfef73); - - return 0; } -early_initcall(momenco_ocelot_g_setup); - /* This needs to be one of the first initcalls, because no I/O port access can work before this */ diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c index ae3cc4b254b5..86937903a9b5 100644 --- a/arch/mips/pci/pci-lasat.c +++ b/arch/mips/pci/pci-lasat.c @@ -52,9 +52,11 @@ static int __init lasat_pci_setup(void) } register_pci_controller(&lasat_pci_controller); - return 0; + + return 0; } -early_initcall(lasat_pci_setup); + +arch_initcall(lasat_pci_setup); #define LASATINT_ETH1 0 #define LASATINT_ETH0 1 diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index 7225bbf20ce4..bdc2ab55bed6 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -212,7 +212,7 @@ static void __init py_late_time_init(void) py_rtc_setup(); } -static int __init pmc_yosemite_setup(void) +void __init plat_setup(void) { board_time_init = yosemite_time_init; late_time_init = py_late_time_init; @@ -228,8 +228,4 @@ static int __init pmc_yosemite_setup(void) OCD_WRITE(RM9000x2_OCD_HTBAR0, HYPERTRANSPORT_BAR0_ADDR); OCD_WRITE(RM9000x2_OCD_HTMASK0, HYPERTRANSPORT_SIZE0); #endif - - return 0; } - -early_initcall(pmc_yosemite_setup); diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index 0e96a5d67993..5e59b4c8876b 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -53,7 +53,7 @@ EXPORT_SYMBOL(ip22_do_break); extern void ip22_be_init(void) __init; extern void ip22_time_init(void) __init; -static int __init ip22_setup(void) +void __init plat_setup(void) { char *ctype; @@ -137,8 +137,4 @@ static int __init ip22_setup(void) } } #endif - - return 0; } - -early_initcall(ip22_setup); diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 6dcee5c46c74..ad1e86b54fae 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -198,7 +198,7 @@ extern void ip27_setup_console(void); extern void ip27_time_init(void); extern void ip27_reboot_setup(void); -static int __init ip27_setup(void) +void __init plat_setup(void) { hubreg_t p, e, n_mode; nasid_t nid; @@ -245,8 +245,4 @@ static int __init ip27_setup(void) set_io_port_base(IO_BASE); board_time_init = ip27_time_init; - - return 0; } - -early_initcall(ip27_setup); diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index 8d270be58224..d10a269aeae1 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -92,7 +92,7 @@ void __init ip32_timer_setup(struct irqaction *irq) setup_irq(IP32_R4K_TIMER_IRQ, irq); } -static int __init ip32_setup(void) +void __init plat_setup(void) { board_be_init = ip32_be_init; @@ -152,8 +152,4 @@ static int __init ip32_setup(void) } } #endif - - return 0; } - -early_initcall(ip32_setup); diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 4daeaa413def..b8be07f061ee 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -84,7 +84,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup) return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL); } -static int __init swarm_setup(void) +void __init plat_setup(void) { sb1250_setup(); @@ -133,12 +133,8 @@ static int __init swarm_setup(void) }; /* XXXKW for CFE, get lines/cols from environment */ #endif - - return 0; } -early_initcall(swarm_setup); - #ifdef LEDS_PHYS #ifdef CONFIG_SIBYTE_CARMEL diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 1b3f8a0903e1..262c85680709 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -167,7 +167,7 @@ static inline void sni_pcimt_time_init(void) rtc_set_time = mc146818_set_rtc_mmss; } -static int __init sni_rm200_pci_setup(void) +void __init plat_setup(void) { sni_pcimt_detect(); sni_pcimt_sc_init(); @@ -196,8 +196,4 @@ static int __init sni_rm200_pci_setup(void) #ifdef CONFIG_PCI register_pci_controller(&sni_controller); #endif - - return 0; } - -early_initcall(sni_rm200_pci_setup); diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c index 26d7c53612a8..edc25d89a782 100644 --- a/arch/mips/tx4927/common/tx4927_setup.c +++ b/arch/mips/tx4927/common/tx4927_setup.c @@ -76,12 +76,8 @@ static void __init tx4927_setup(void) toshiba_rbtx4927_setup(); } #endif - - return; } -early_initcall(tx4927_setup); - void __init tx4927_time_init(void) { diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c index e03be896cbc4..578f6496ffd4 100644 --- a/arch/mips/vr41xx/common/init.c +++ b/arch/mips/vr41xx/common/init.c @@ -58,6 +58,14 @@ static void __init timer_init(void) board_timer_setup = setup_timer_irq; } +void __init plat_setup(void) +{ + vr41xx_calculate_clock_frequency(); + + timer_init(); + iomem_resource_init(); +} + void __init prom_init(void) { int argc, i; @@ -71,12 +79,6 @@ void __init prom_init(void) if (i < (argc - 1)) strcat(arcs_cmdline, " "); } - - vr41xx_calculate_clock_frequency(); - - timer_init(); - - iomem_resource_init(); } unsigned long __init prom_free_prom_memory (void) diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c index db686ce42e85..53272a5c3cbe 100644 --- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c +++ b/arch/mips/vr41xx/nec-cmbvr4133/setup.c @@ -56,7 +56,7 @@ static struct mtd_partition cmbvr4133_mtd_parts[] = { extern void i8259_init(void); -static int __init nec_cmbvr4133_setup(void) +static void __init nec_cmbvr4133_setup(void) { #ifdef CONFIG_ROCKHOPPER extern void disable_pcnet(void); @@ -90,7 +90,4 @@ static int __init nec_cmbvr4133_setup(void) #ifdef CONFIG_ROCKHOPPER i8259_init(); #endif - return 0; } - -early_initcall(nec_cmbvr4133_setup); diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h index 65d1d16eab16..ed01124561c1 100644 --- a/include/asm-mips/mips-boards/generic.h +++ b/include/asm-mips/mips-boards/generic.h @@ -79,4 +79,10 @@ extern unsigned int mips_revision_corid; +#ifdef CONFIG_PCI +extern void mips_pcibios_init(void); +#else +#define mips_pcibios_init() do { } while (0) +#endif + #endif /* __ASM_MIPS_BOARDS_GENERIC_H */ -- GitLab From b053c98fbbe9942669af2f1a351eaeae1b344d38 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 26 Jan 2005 02:21:06 +0000 Subject: [PATCH 0892/1519] Fix register layout in o32 core dumps on 64-bit systems. Signed-off-by: Ralf Baechle --- arch/mips/kernel/binfmt_elfo32.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index b4075e99c452..3ef8c852e830 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -98,7 +98,7 @@ struct elf_prpsinfo32 #define init_elf_binfmt init_elf32_binfmt #define jiffies_to_timeval jiffies_to_compat_timeval -static __inline__ void +static inline void jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) { /* @@ -113,21 +113,26 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value) #undef ELF_CORE_COPY_REGS #define ELF_CORE_COPY_REGS(_dest,_regs) elf32_core_copy_regs(_dest,_regs); -void elf32_core_copy_regs(elf_gregset_t _dest, struct pt_regs *_regs) +void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs) { int i; - memset(_dest, 0, sizeof(elf_gregset_t)); - - /* XXXKW the 6 is from EF_REG0 in gdb/gdb/mips-linux-tdep.c, include/asm-mips/reg.h */ - for (i=6; i<38; i++) - _dest[i] = (elf_greg_t) _regs->regs[i-6]; - _dest[i++] = (elf_greg_t) _regs->lo; - _dest[i++] = (elf_greg_t) _regs->hi; - _dest[i++] = (elf_greg_t) _regs->cp0_epc; - _dest[i++] = (elf_greg_t) _regs->cp0_badvaddr; - _dest[i++] = (elf_greg_t) _regs->cp0_status; - _dest[i++] = (elf_greg_t) _regs->cp0_cause; + for (i = 0; i < EF_R0; i++) + grp[i] = 0; + grp[EF_R0] = 0; + for (i = 1; i <= 31; i++) + grp[EF_R0 + i] = (elf_greg_t) regs->regs[i]; + grp[EF_R26] = 0; + grp[EF_R27] = 0; + grp[EF_LO] = (elf_greg_t) regs->lo; + grp[EF_HI] = (elf_greg_t) regs->hi; + grp[EF_CP0_EPC] = (elf_greg_t) regs->cp0_epc; + grp[EF_CP0_BADVADDR] = (elf_greg_t) regs->cp0_badvaddr; + grp[EF_CP0_STATUS] = (elf_greg_t) regs->cp0_status; + grp[EF_CP0_CAUSE] = (elf_greg_t) regs->cp0_cause; +#ifdef EF_UNUSED0 + grp[EF_UNUSED0] = 0; +#endif } MODULE_DESCRIPTION("Binary format loader for compatibility with o32 Linux/MIPS binaries"); -- GitLab From c6237645d1e9e687031048f5ffd343133fddb55c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 26 Jan 2005 02:22:22 +0000 Subject: [PATCH 0893/1519] Signed-off-by: Ralf Baechle Fix TASK_SIZE for 32-bit processes on 64-bit kernels. --- arch/mips/kernel/binfmt_elfn32.c | 4 +++- arch/mips/kernel/binfmt_elfo32.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index 6b645fbb1ddc..d8e2674a1543 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -52,7 +52,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #include #include -#include #include #include @@ -116,4 +115,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)"); #undef MODULE_DESCRIPTION #undef MODULE_AUTHOR +#undef TASK_SIZE +#define TASK_SIZE TASK_SIZE32 + #include "../../../fs/binfmt_elf.c" diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index 3ef8c852e830..cec5f327e360 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -54,7 +54,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; #include #include -#include #include #include @@ -141,4 +140,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)"); #undef MODULE_DESCRIPTION #undef MODULE_AUTHOR +#undef TASK_SIZE +#define TASK_SIZE TASK_SIZE32 + #include "../../../fs/binfmt_elf.c" -- GitLab From bec0204dfb35cd5b91c0b34f97a481f363f6b272 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 1 Feb 2005 12:02:37 +0000 Subject: [PATCH 0894/1519] Actually route cPCI interrupts. Update inaccurate comments. Signed-off-by: Ralf Baechle --- arch/mips/pci/fixup-atlas.c | 41 +++++++++++++++++++++++++++++-------- 1 file changed, 32 insertions(+), 9 deletions(-) diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c index 2406835833d6..87920b245931 100644 --- a/arch/mips/pci/fixup-atlas.c +++ b/arch/mips/pci/fixup-atlas.c @@ -1,14 +1,37 @@ +/* + * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ #include #include #include + #include -#define INTD ATLASINT_INTD -#define INTC ATLASINT_INTC -#define INTB ATLASINT_INTB +#define PCIA ATLASINT_PCIA +#define PCIB ATLASINT_PCIB +#define PCIC ATLASINT_PCIC +#define PCID ATLASINT_PCID #define INTA ATLASINT_INTA -#define SCSI ATLASINT_SCSI +#define INTB ATLASINT_INTB #define ETH ATLASINT_ETH +#define INTC ATLASINT_INTC +#define SCSI ATLASINT_SCSI +#define INTD ATLASINT_INTD static char irq_tab[][5] __initdata = { /* INTA INTB INTC INTD */ @@ -27,13 +50,13 @@ static char irq_tab[][5] __initdata = { {0, 0, 0, 0, 0 }, /* 12: Unused */ {0, 0, 0, 0, 0 }, /* 13: Unused */ {0, 0, 0, 0, 0 }, /* 14: Unused */ - {0, 0, 0, 0, 0 }, /* 15: Unused */ + {0, PCIA, PCIB, PCIC, PCID }, /* 15: cPCI (behind 21150) */ {0, SCSI, 0, 0, 0 }, /* 16: SYM53C810A SCSI */ {0, 0, 0, 0, 0 }, /* 17: Core */ - {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot 1 */ - {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Ethernet */ - {0, 0, 0, 0, 0 }, /* 20: PCI Slot 3 */ - {0, 0, 0, 0, 0 } /* 21: PCI Slot 4 */ + {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot */ + {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Eth. et al. */ + {0, 0, 0, 0, 0 }, /* 20: Unused */ + {0, 0, 0, 0, 0 } /* 21: Unused */ }; int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -- GitLab From aa0980b8090878bf42bc73a13d051a203a201d7d Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 1 Feb 2005 20:18:59 +0000 Subject: [PATCH 0895/1519] Fixes for system controllers for Atlas/Malta core cards. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/init.c | 61 ++++-- arch/mips/mips-boards/generic/pci.c | 158 +++++++++++---- arch/mips/pci/ops-bonito64.c | 14 +- arch/mips/pci/ops-gt64120.c | 10 +- arch/mips/pci/ops-msc.c | 31 +-- include/asm-mips/mips-boards/msc01_pci.h | 241 ++++++++++++----------- 6 files changed, 297 insertions(+), 218 deletions(-) diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index 311155d1d3ed..d821b13d24a0 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -1,6 +1,8 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -22,18 +24,17 @@ #include #include -#include #include +#include +#include +#include + #include #include -#ifdef CONFIG_MIPS_GT64120 -#include -#endif -#include #include -#ifdef CONFIG_MIPS_MALTA +#include + #include -#endif #ifdef CONFIG_KGDB extern int rs_kgdb_hook(int, int); @@ -225,6 +226,8 @@ void __init kgdb_config (void) void __init prom_init(void) { + u32 start, map, mask, data; + prom_argc = fw_arg0; _prom_argv = (int *) fw_arg1; _prom_envp = (int *) fw_arg2; @@ -266,12 +269,15 @@ void __init prom_init(void) #else GT_WRITE(GT_PCI0_CMD_OFS, 0); #endif + /* Fix up PCI I/O mapping if necessary (for Atlas). */ + start = GT_READ(GT_PCI0IOLD_OFS); + map = GT_READ(GT_PCI0IOREMAP_OFS); + if ((start & map) != 0) { + map &= ~start; + GT_WRITE(GT_PCI0IOREMAP_OFS, map); + } -#ifdef CONFIG_MIPS_MALTA set_io_port_base(MALTA_GT_PORT_BASE); -#else - set_io_port_base((unsigned long)ioremap(0, 0x20000000)); -#endif break; case MIPS_REVISION_CORID_CORE_EMUL_BON: @@ -300,11 +306,7 @@ void __init prom_init(void) BONITO_BONGENCFG_BYTESWAP; #endif -#ifdef CONFIG_MIPS_MALTA set_io_port_base(MALTA_BONITO_PORT_BASE); -#else - set_io_port_base((unsigned long)ioremap(0, 0x20000000)); -#endif break; case MIPS_REVISION_CORID_CORE_MSC: @@ -312,6 +314,12 @@ void __init prom_init(void) case MIPS_REVISION_CORID_CORE_EMUL_MSC: _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); + mb(); + MSC_READ(MSC01_PCI_CFG, data); + MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT); + wmb(); + + /* Fix up lane swapping. */ #ifdef CONFIG_CPU_LITTLE_ENDIAN MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP); #else @@ -320,12 +328,23 @@ void __init prom_init(void) MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF | MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF); #endif + /* Fix up target memory mapping. */ + MSC_READ(MSC01_PCI_BAR0, mask); + MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK); + + /* Don't handle target retries indefinitely. */ + if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) == + MSC01_PCI_CFG_MAXRTRY_MSK) + data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK << + MSC01_PCI_CFG_MAXRTRY_SHF)) | + ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) << + MSC01_PCI_CFG_MAXRTRY_SHF); + + wmb(); + MSC_WRITE(MSC01_PCI_CFG, data); + mb(); -#ifdef CONFIG_MIPS_MALTA set_io_port_base(MALTA_MSC_PORT_BASE); -#else - set_io_port_base((unsigned long)ioremap(0, 0x20000000)); -#endif break; default: diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c index 5dadedffba13..c8398c497a21 100644 --- a/arch/mips/mips-boards/generic/pci.c +++ b/arch/mips/mips-boards/generic/pci.c @@ -1,6 +1,8 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki * * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * @@ -19,65 +21,46 @@ * * MIPS boards specific PCI support. */ -#include #include #include #include #include -#include #include + +#include #include #include -#ifdef CONFIG_MIPS_MALTA -#include -#endif static struct resource bonito64_mem_resource = { .name = "Bonito PCI MEM", - .start = 0x10000000UL, - .end = 0x1bffffffUL, .flags = IORESOURCE_MEM, }; static struct resource bonito64_io_resource = { - .name = "Bonito IO MEM", - .start = 0x00002000UL, /* avoid conflicts with YAMON allocated I/O addresses */ + .name = "Bonito PCI I/O", + .start = 0x00000000UL, .end = 0x000fffffUL, .flags = IORESOURCE_IO, }; static struct resource gt64120_mem_resource = { - .name = "GT64120 PCI MEM", - .start = 0x10000000UL, - .end = 0x1bdfffffUL, + .name = "GT-64120 PCI MEM", .flags = IORESOURCE_MEM, }; static struct resource gt64120_io_resource = { - .name = "GT64120 IO MEM", -#ifdef CONFIG_MIPS_ATLAS - .start = 0x18000000UL, - .end = 0x181fffffUL, -#endif -#ifdef CONFIG_MIPS_MALTA - .start = 0x00002000UL, - .end = 0x001fffffUL, -#endif + .name = "GT-64120 PCI I/O", .flags = IORESOURCE_IO, }; static struct resource msc_mem_resource = { .name = "MSC PCI MEM", - .start = 0x10000000UL, - .end = 0x1fffffffUL, .flags = IORESOURCE_MEM, }; static struct resource msc_io_resource = { - .name = "MSC IO MEM", - .start = 0x00002000UL, - .end = 0x007fffffUL, + .name = "MSC PCI I/O", .flags = IORESOURCE_IO, }; @@ -89,7 +72,6 @@ static struct pci_controller bonito64_controller = { .pci_ops = &bonito64_pci_ops, .io_resource = &bonito64_io_resource, .mem_resource = &bonito64_mem_resource, - .mem_offset = 0x10000000UL, .io_offset = 0x00000000UL, }; @@ -97,21 +79,18 @@ static struct pci_controller gt64120_controller = { .pci_ops = >64120_pci_ops, .io_resource = >64120_io_resource, .mem_resource = >64120_mem_resource, - .mem_offset = 0x00000000UL, - .io_offset = 0x00000000UL, }; -static struct pci_controller msc_controller = { +static struct pci_controller msc_controller = { .pci_ops = &msc_pci_ops, .io_resource = &msc_io_resource, .mem_resource = &msc_mem_resource, - .mem_offset = 0x10000000UL, - .io_offset = 0x00000000UL, }; void __init mips_pcibios_init(void) { struct pci_controller *controller; + unsigned long start, end, map, start1, end1, map1, map2, map3, mask; switch (mips_revision_corid) { case MIPS_REVISION_CORID_QED_RM5261: @@ -130,29 +109,138 @@ void __init mips_pcibios_init(void) (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */ (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/ ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/ - GT_PCI0_CFGADDR_CONFIGEN_BIT ); + GT_PCI0_CFGADDR_CONFIGEN_BIT); /* Perform the write */ GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE)); + /* Set up resource ranges from the controller's registers. */ + start = GT_READ(GT_PCI0M0LD_OFS); + end = GT_READ(GT_PCI0M0HD_OFS); + map = GT_READ(GT_PCI0M0REMAP_OFS); + end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); + start1 = GT_READ(GT_PCI0M1LD_OFS); + end1 = GT_READ(GT_PCI0M1HD_OFS); + map1 = GT_READ(GT_PCI0M1REMAP_OFS); + end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK); + /* Cannot support multiple windows, use the wider. */ + if (end1 - start1 > end - start) { + start = start1; + end = end1; + map = map1; + } + mask = ~(start ^ end); + /* We don't support remapping with a discontiguous mask. */ + BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && + mask != ~((mask & -mask) - 1)); + gt64120_mem_resource.start = start; + gt64120_mem_resource.end = end; + gt64120_controller.mem_offset = (start & mask) - (map & mask); + /* Addresses are 36-bit, so do shifts in the destinations. */ + gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF; + gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF; + gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; + gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF; + + start = GT_READ(GT_PCI0IOLD_OFS); + end = GT_READ(GT_PCI0IOHD_OFS); + map = GT_READ(GT_PCI0IOREMAP_OFS); + end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); + mask = ~(start ^ end); + /* We don't support remapping with a discontiguous mask. */ + BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && + mask != ~((mask & -mask) - 1)); + gt64120_io_resource.start = map & mask; + gt64120_io_resource.end = (map & mask) | ~mask; + gt64120_controller.io_offset = 0; + /* Addresses are 36-bit, so do shifts in the destinations. */ + gt64120_io_resource.start <<= GT_PCI_DCRM_SHF; + gt64120_io_resource.end <<= GT_PCI_DCRM_SHF; + gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; + controller = >64120_controller; break; case MIPS_REVISION_CORID_BONITO64: case MIPS_REVISION_CORID_CORE_20K: case MIPS_REVISION_CORID_CORE_EMUL_BON: + /* Set up resource ranges from the controller's registers. */ + map = BONITO_PCIMAP; + map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >> + BONITO_PCIMAP_PCIMAP_LO0_SHIFT; + map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >> + BONITO_PCIMAP_PCIMAP_LO1_SHIFT; + map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >> + BONITO_PCIMAP_PCIMAP_LO2_SHIFT; + /* Combine as many adjacent windows as possible. */ + map = map1; + start = BONITO_PCILO0_BASE; + end = 1; + if (map3 == map2 + 1) { + map = map2; + start = BONITO_PCILO1_BASE; + end++; + } + if (map2 == map1 + 1) { + map = map1; + start = BONITO_PCILO0_BASE; + end++; + } + bonito64_mem_resource.start = start; + bonito64_mem_resource.end = start + + BONITO_PCIMAP_WINBASE(end) - 1; + bonito64_controller.mem_offset = start - + BONITO_PCIMAP_WINBASE(map); + controller = &bonito64_controller; break; case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: case MIPS_REVISION_CORID_CORE_EMUL_MSC: + /* Set up resource ranges from the controller's registers. */ + MSC_READ(MSC01_PCI_SC2PMBASL, start); + MSC_READ(MSC01_PCI_SC2PMMSKL, mask); + MSC_READ(MSC01_PCI_SC2PMMAPL, map); + msc_mem_resource.start = start & mask; + msc_mem_resource.end = (start & mask) | ~mask; + msc_controller.mem_offset = (start & mask) - (map & mask); + + MSC_READ(MSC01_PCI_SC2PIOBASL, start); + MSC_READ(MSC01_PCI_SC2PIOMSKL, mask); + MSC_READ(MSC01_PCI_SC2PIOMAPL, map); + msc_io_resource.start = map & mask; + msc_io_resource.end = (map & mask) | ~mask; + msc_controller.io_offset = 0; + ioport_resource.end = ~mask; + + /* If ranges overlap I/O takes precedence. */ + start = start & mask; + end = start | ~mask; + if ((start >= msc_mem_resource.start && + start <= msc_mem_resource.end) || + (end >= msc_mem_resource.start && + end <= msc_mem_resource.end)) { + /* Use the larger space. */ + start = max(start, msc_mem_resource.start); + end = min(end, msc_mem_resource.end); + if (start - msc_mem_resource.start >= + msc_mem_resource.end - end) + msc_mem_resource.end = start - 1; + else + msc_mem_resource.start = end + 1; + } + controller = &msc_controller; break; default: return; } + if (controller->io_resource->start < 0x00001000UL) /* FIXME */ + controller->io_resource->start = 0x00001000UL; + + iomem_resource.end &= 0xfffffffffULL; /* 64 GB */ ioport_resource.end = controller->io_resource->end; register_pci_controller (controller); diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index 4b4e086a7eb1..dc35270b65a2 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -1,6 +1,8 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -17,7 +19,6 @@ * * MIPS boards specific PCI support. */ -#include #include #include #include @@ -57,13 +58,6 @@ static int bonito64_pcibios_config_access(unsigned char access_type, return -1; } -#ifdef CONFIG_MIPS_BOARDS_GEN - if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) { - /* MIPS Core boards have Bonito connected as device 17 */ - return -1; - } -#endif - /* Clear cause register bits */ BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR | BONITO_PCICMD_MTABORT_CLR); diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64120.c index 7b99dfa33dfc..6335844d607a 100644 --- a/arch/mips/pci/ops-gt64120.c +++ b/arch/mips/pci/ops-gt64120.c @@ -1,6 +1,8 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -43,10 +45,6 @@ static int gt64120_pcibios_config_access(unsigned char access_type, unsigned char busnum = bus->number; u32 intr; - if ((busnum == 0) && (PCI_SLOT(devfn) == 0)) - /* Galileo itself is devfn 0, don't move it around */ - return -1; - if ((busnum == 0) && (devfn >= PCI_DEVFN(31, 0))) return -1; /* Because of a bug in the galileo (for slot 31). */ diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c index 7bc099643a9d..5d9fbb0f4670 100644 --- a/arch/mips/pci/ops-msc.c +++ b/arch/mips/pci/ops-msc.c @@ -21,7 +21,6 @@ * MIPS boards specific PCI support. * */ -#include #include #include #include @@ -49,34 +48,17 @@ static int msc_pcibios_config_access(unsigned char access_type, struct pci_bus *bus, unsigned int devfn, int where, u32 * data) { unsigned char busnum = bus->number; - unsigned char type; u32 intr; -#ifdef CONFIG_MIPS_BOARDS_GEN - if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) { - /* MIPS Core boards have SOCit connected as device 17 */ - return -1; - } -#endif - /* Clear status register bits. */ MSC_WRITE(MSC01_PCI_INTSTAT, (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)); - /* Setup address */ - if (busnum == 0) - type = 0; /* Type 0 */ - else - type = 1; /* Type 1 */ - MSC_WRITE(MSC01_PCI_CFGADDR, ((busnum << MSC01_PCI_CFGADDR_BNUM_SHF) | - (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) - | (PCI_FUNC(devfn) << - MSC01_PCI_CFGADDR_FNUM_SHF) | ((where / - 4) << - MSC01_PCI_CFGADDR_RNUM_SHF) - | (type))); + (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) | + (PCI_FUNC(devfn) << MSC01_PCI_CFGADDR_FNUM_SHF) | + ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF))); /* Perform access */ if (access_type == PCI_ACCESS_WRITE) @@ -86,15 +68,12 @@ static int msc_pcibios_config_access(unsigned char access_type, /* Detect Master/Target abort */ MSC_READ(MSC01_PCI_INTSTAT, intr); - if (intr & (MSC01_PCI_INTCFG_MA_BIT | - MSC01_PCI_INTCFG_TA_BIT)) { + if (intr & (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)) { /* Error occurred */ /* Clear bits */ - MSC_READ(MSC01_PCI_INTSTAT, intr); MSC_WRITE(MSC01_PCI_INTSTAT, - (MSC01_PCI_INTCFG_MA_BIT | - MSC01_PCI_INTCFG_TA_BIT)); + (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)); return -1; } diff --git a/include/asm-mips/mips-boards/msc01_pci.h b/include/asm-mips/mips-boards/msc01_pci.h index 6b2a87a38f4b..8eaefb837b9d 100644 --- a/include/asm-mips/mips-boards/msc01_pci.h +++ b/include/asm-mips/mips-boards/msc01_pci.h @@ -1,8 +1,9 @@ /* * PCI Register definitions for the MIPS System Controller. * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2002, 2005 MIPS Technologies, Inc. All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -29,22 +30,22 @@ #define MSC01_PCI_CFGADDR_OFS 0x0610 #define MSC01_PCI_CFGDATA_OFS 0x0618 #define MSC01_PCI_IACK_OFS 0x0620 -#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */ -#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */ -#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */ -#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */ -#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */ -#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */ -#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */ -#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */ -#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */ -#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */ -#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */ -#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */ -#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */ -#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */ -#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */ -#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */ +#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */ +#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */ +#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */ +#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */ +#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */ +#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */ +#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */ +#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */ +#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */ +#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */ +#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */ +#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */ +#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */ +#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */ +#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */ +#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */ #define MSC01_PCI_BAR0_OFS 0x2220 #define MSC01_PCI_CFG_OFS 0x2380 #define MSC01_PCI_SWAP_OFS 0x2388 @@ -86,73 +87,73 @@ #define MSC01_PCI_P2SCMAPL_MAP_SHF 24 #define MSC01_PCI_P2SCMAPL_MAP_MSK 0xff000000 -#define MSC01_PCI_INTCFG_RST_SHF 10 -#define MSC01_PCI_INTCFG_RST_MSK 0x00000400 -#define MSC01_PCI_INTCFG_RST_BIT 0x00000400 -#define MSC01_PCI_INTCFG_MWE_SHF 9 -#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200 -#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200 -#define MSC01_PCI_INTCFG_DTO_SHF 8 -#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100 -#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100 -#define MSC01_PCI_INTCFG_MA_SHF 7 -#define MSC01_PCI_INTCFG_MA_MSK 0x00000080 -#define MSC01_PCI_INTCFG_MA_BIT 0x00000080 -#define MSC01_PCI_INTCFG_TA_SHF 6 -#define MSC01_PCI_INTCFG_TA_MSK 0x00000040 -#define MSC01_PCI_INTCFG_TA_BIT 0x00000040 -#define MSC01_PCI_INTCFG_RTY_SHF 5 -#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020 -#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020 -#define MSC01_PCI_INTCFG_MWP_SHF 4 -#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010 -#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010 -#define MSC01_PCI_INTCFG_MRP_SHF 3 -#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008 -#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008 -#define MSC01_PCI_INTCFG_SWP_SHF 2 -#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004 -#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004 -#define MSC01_PCI_INTCFG_SRP_SHF 1 -#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002 -#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002 -#define MSC01_PCI_INTCFG_SE_SHF 0 -#define MSC01_PCI_INTCFG_SE_MSK 0x00000001 -#define MSC01_PCI_INTCFG_SE_BIT 0x00000001 +#define MSC01_PCI_INTCFG_RST_SHF 10 +#define MSC01_PCI_INTCFG_RST_MSK 0x00000400 +#define MSC01_PCI_INTCFG_RST_BIT 0x00000400 +#define MSC01_PCI_INTCFG_MWE_SHF 9 +#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200 +#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200 +#define MSC01_PCI_INTCFG_DTO_SHF 8 +#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100 +#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100 +#define MSC01_PCI_INTCFG_MA_SHF 7 +#define MSC01_PCI_INTCFG_MA_MSK 0x00000080 +#define MSC01_PCI_INTCFG_MA_BIT 0x00000080 +#define MSC01_PCI_INTCFG_TA_SHF 6 +#define MSC01_PCI_INTCFG_TA_MSK 0x00000040 +#define MSC01_PCI_INTCFG_TA_BIT 0x00000040 +#define MSC01_PCI_INTCFG_RTY_SHF 5 +#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020 +#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020 +#define MSC01_PCI_INTCFG_MWP_SHF 4 +#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010 +#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010 +#define MSC01_PCI_INTCFG_MRP_SHF 3 +#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008 +#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008 +#define MSC01_PCI_INTCFG_SWP_SHF 2 +#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004 +#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004 +#define MSC01_PCI_INTCFG_SRP_SHF 1 +#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002 +#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002 +#define MSC01_PCI_INTCFG_SE_SHF 0 +#define MSC01_PCI_INTCFG_SE_MSK 0x00000001 +#define MSC01_PCI_INTCFG_SE_BIT 0x00000001 -#define MSC01_PCI_INTSTAT_RST_SHF 10 -#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400 -#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400 -#define MSC01_PCI_INTSTAT_MWE_SHF 9 -#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200 -#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200 -#define MSC01_PCI_INTSTAT_DTO_SHF 8 -#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100 -#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100 -#define MSC01_PCI_INTSTAT_MA_SHF 7 -#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080 -#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080 -#define MSC01_PCI_INTSTAT_TA_SHF 6 -#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040 -#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040 -#define MSC01_PCI_INTSTAT_RTY_SHF 5 -#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020 -#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020 -#define MSC01_PCI_INTSTAT_MWP_SHF 4 -#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010 -#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010 -#define MSC01_PCI_INTSTAT_MRP_SHF 3 -#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008 -#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008 -#define MSC01_PCI_INTSTAT_SWP_SHF 2 -#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004 -#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004 -#define MSC01_PCI_INTSTAT_SRP_SHF 1 -#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002 -#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002 -#define MSC01_PCI_INTSTAT_SE_SHF 0 -#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001 -#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001 +#define MSC01_PCI_INTSTAT_RST_SHF 10 +#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400 +#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400 +#define MSC01_PCI_INTSTAT_MWE_SHF 9 +#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200 +#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200 +#define MSC01_PCI_INTSTAT_DTO_SHF 8 +#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100 +#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100 +#define MSC01_PCI_INTSTAT_MA_SHF 7 +#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080 +#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080 +#define MSC01_PCI_INTSTAT_TA_SHF 6 +#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040 +#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040 +#define MSC01_PCI_INTSTAT_RTY_SHF 5 +#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020 +#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020 +#define MSC01_PCI_INTSTAT_MWP_SHF 4 +#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010 +#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010 +#define MSC01_PCI_INTSTAT_MRP_SHF 3 +#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008 +#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008 +#define MSC01_PCI_INTSTAT_SWP_SHF 2 +#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004 +#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004 +#define MSC01_PCI_INTSTAT_SRP_SHF 1 +#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002 +#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002 +#define MSC01_PCI_INTSTAT_SE_SHF 0 +#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001 +#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001 #define MSC01_PCI_CFGADDR_BNUM_SHF 16 #define MSC01_PCI_CFGADDR_BNUM_MSK 0x00ff0000 @@ -167,29 +168,29 @@ #define MSC01_PCI_CFGDATA_DATA_MSK 0xffffffff /* The defines below are ONLY valid for a MEM bar! */ -#define MSC01_PCI_BAR0_SIZE_SHF 4 -#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0 -#define MSC01_PCI_BAR0_P_SHF 3 -#define MSC01_PCI_BAR0_P_MSK 0x00000008 -#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK -#define MSC01_PCI_BAR0_D_SHF 1 -#define MSC01_PCI_BAR0_D_MSK 0x00000006 -#define MSC01_PCI_BAR0_T_SHF 0 -#define MSC01_PCI_BAR0_T_MSK 0x00000001 -#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK +#define MSC01_PCI_BAR0_SIZE_SHF 4 +#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0 +#define MSC01_PCI_BAR0_P_SHF 3 +#define MSC01_PCI_BAR0_P_MSK 0x00000008 +#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK +#define MSC01_PCI_BAR0_D_SHF 1 +#define MSC01_PCI_BAR0_D_MSK 0x00000006 +#define MSC01_PCI_BAR0_T_SHF 0 +#define MSC01_PCI_BAR0_T_MSK 0x00000001 +#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK -#define MSC01_PCI_CFG_RA_SHF 17 -#define MSC01_PCI_CFG_RA_MSK 0x00020000 -#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK -#define MSC01_PCI_CFG_G_SHF 16 -#define MSC01_PCI_CFG_G_MSK 0x00010000 -#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK -#define MSC01_PCI_CFG_EN_SHF 15 -#define MSC01_PCI_CFG_EN_MSK 0x00008000 -#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK -#define MSC01_PCI_CFG_MAXRTRY_SHF 0 -#define MSC01_PCI_CFG_MAXRTRY_MSK 0x000000ff +#define MSC01_PCI_CFG_RA_SHF 17 +#define MSC01_PCI_CFG_RA_MSK 0x00020000 +#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK +#define MSC01_PCI_CFG_G_SHF 16 +#define MSC01_PCI_CFG_G_MSK 0x00010000 +#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK +#define MSC01_PCI_CFG_EN_SHF 15 +#define MSC01_PCI_CFG_EN_MSK 0x00008000 +#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK +#define MSC01_PCI_CFG_MAXRTRY_SHF 0 +#define MSC01_PCI_CFG_MAXRTRY_MSK 0x00000fff #define MSC01_PCI_SWAP_IO_SHF 18 #define MSC01_PCI_SWAP_IO_MSK 0x000c0000 @@ -206,7 +207,7 @@ * FIXME - are these macros specific to Malta and co or to the MSC? If the * latter, they should be moved elsewhere. */ -#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000 +#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000 extern unsigned long _pcictrl_msc; @@ -219,19 +220,19 @@ extern unsigned long _pcictrl_msc; * Registers absolute addresses */ -#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS) -#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS) -#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS) -#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS) -#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS) -#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS) -#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS) -#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS) -#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS) -#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS) -#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS) -#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS) -#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS) +#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS) +#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS) +#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS) +#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS) +#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS) +#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS) +#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS) +#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS) +#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS) +#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS) +#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS) +#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS) +#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS) #define MSC01_PCI_IACK (MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS) #define MSC01_PCI_HEAD0 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS) #define MSC01_PCI_HEAD1 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS) @@ -248,7 +249,7 @@ extern unsigned long _pcictrl_msc; #define MSC01_PCI_HEAD12 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) #define MSC01_PCI_HEAD13 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) #define MSC01_PCI_HEAD14 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) -#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) +#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS) #define MSC01_PCI_BAR0 (MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS) #define MSC01_PCI_CFG (MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS) #define MSC01_PCI_SWAP (MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS) -- GitLab From 6b123979543a37d109b74a359b147b38ee8166dd Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 1 Feb 2005 20:21:48 +0000 Subject: [PATCH 0896/1519] Fix compilation; by Manish Lachwani. Signed-off-by: Ralf Baechle --- include/asm-mips/sibyte/board.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-mips/sibyte/board.h b/include/asm-mips/sibyte/board.h index d7b11b6c7c32..57b9279e69f0 100644 --- a/include/asm-mips/sibyte/board.h +++ b/include/asm-mips/sibyte/board.h @@ -66,4 +66,6 @@ extern void setleds(char *str); #endif /* CONFIG_SIBYTE_BOARD */ +#endif /* __ASSEMBLY__ */ + #endif /* _SIBYTE_BOARD_H */ -- GitLab From 304429915dad26ccf212d63ea1f18be36e3188e2 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 1 Feb 2005 23:02:12 +0000 Subject: [PATCH 0897/1519] Formatting fixes. Signed-off-by: Ralf Baechle --- arch/mips/mm/tlb-r4k.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 59d38bc05b69..09249a756016 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -100,7 +100,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, continue; /* Make sure all entries differ. */ write_c0_entryhi(CKSEG0 + - (idx << (PAGE_SHIFT + 1))); + (idx << (PAGE_SHIFT + 1))); mtc0_tlbw_hazard(); tlb_write_indexed(); } @@ -250,13 +250,13 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) idx = read_c0_index(); ptep = pte_offset_map(pmdp, address); - #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) - write_c0_entrylo0(ptep->pte_high); - ptep++; - write_c0_entrylo1(ptep->pte_high); +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) + write_c0_entrylo0(ptep->pte_high); + ptep++; + write_c0_entrylo1(ptep->pte_high); #else - write_c0_entrylo0(pte_val(*ptep++) >> 6); - write_c0_entrylo1(pte_val(*ptep) >> 6); + write_c0_entrylo0(pte_val(*ptep++) >> 6); + write_c0_entrylo1(pte_val(*ptep) >> 6); #endif write_c0_entryhi(address | pid); mtc0_tlbw_hazard(); @@ -357,7 +357,8 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, old_pagemask = read_c0_pagemask(); wired = read_c0_wired(); if (--temp_tlb_entry < wired) { - printk(KERN_WARNING "No TLB space left for add_temporary_entry\n"); + printk(KERN_WARNING + "No TLB space left for add_temporary_entry\n"); ret = -ENOSPC; goto out; } @@ -388,7 +389,7 @@ static void __init probe_tlb(unsigned long config) * is not supported, we assume R4k style. Cpu probing already figured * out the number of tlb entries. */ - if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY) + if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY) return; reg = read_c0_config1(); -- GitLab From b6d468ec2db51768a456a894105a96f4ad8a346a Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 2 Feb 2005 20:36:21 +0000 Subject: [PATCH 0898/1519] Reenable EARLY_PRINTK for the DECstation. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4cd724c05700..a3ad171874c9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -210,6 +210,7 @@ config MACH_DECSTATION bool "Support for DECstations" select BOOT_ELF32 select DMA_NONCOHERENT + select EARLY_PRINTK select IRQ_CPU select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL -- GitLab From f638d1971e3135025471c99bf079a24fbb1f3bfa Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 2 Feb 2005 22:23:46 +0000 Subject: [PATCH 0899/1519] Update descriptions for MIPS Technologies evaluation boards. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a3ad171874c9..bfd5014a8afe 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -335,7 +335,7 @@ config MIPS_ATLAS select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL help - This enables support for the QED R5231-based MIPS Atlas evaluation + This enables support for the MIPS Technologies Atlas evaluation board. config MIPS_MALTA @@ -351,7 +351,7 @@ config MIPS_MALTA select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL help - This enables support for the VR5000-based MIPS Malta evaluation + This enables support for the MIPS Technologies Malta evaluation board. config MIPS_SEAD @@ -361,6 +361,9 @@ config MIPS_SEAD select DMA_NONCOHERENT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL + help + This enables support for the MIPS Technologies SEAD evaluation + board. config MOMENCO_OCELOT bool "Support for Momentum Ocelot board" -- GitLab From e3c4807825501f0b445fe34b627669be24b59320 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 3 Feb 2005 13:34:45 +0000 Subject: [PATCH 0900/1519] Define __raw_read_can_lock / __raw_write_can_lock. Signed-off-by: Ralf Baechle --- include/asm-mips/spinlock.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h index 4d0135b11156..075e9701d6bc 100644 --- a/include/asm-mips/spinlock.h +++ b/include/asm-mips/spinlock.h @@ -119,6 +119,18 @@ static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) * read-locks. */ +/* + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(rw) ((rw)->lock >= 0) + +/* + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(rw) (!(rw)->lock) + static inline void __raw_read_lock(raw_rwlock_t *rw) { unsigned int tmp; -- GitLab From db89a48c1f2fa9197404ca511d9df808196ca25d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 3 Feb 2005 13:37:41 +0000 Subject: [PATCH 0901/1519] Replace deprecated interruptible_sleep_on() function call with direct wait-queue usage. Signed-off-by: Ralf Baechle --- arch/mips/sibyte/sb1250/bcm1250_tbprof.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c index 7f813ae9eaff..dba3d0872e7e 100644 --- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c +++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -231,6 +232,7 @@ int sbprof_zbprof_start(struct file *filp) int sbprof_zbprof_stop(void) { + DEFINE_WAIT(wait); DBG(printk(DEVNAME ": stopping\n")); if (sbp.tb_enable) { @@ -240,7 +242,9 @@ int sbprof_zbprof_stop(void) this sleep happens. */ if (sbp.tb_armed) { DBG(printk(DEVNAME ": wait for disarm\n")); - interruptible_sleep_on(&sbp.tb_sync); + prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE); + schedule(); + finish_wait(&sbp.tb_sync, &wait); DBG(printk(DEVNAME ": disarm complete\n")); } free_irq(K_INT_TRACE_FREEZE, &sbp); @@ -348,7 +352,10 @@ static int sbprof_tb_ioctl(struct inode *inode, error = sbprof_zbprof_stop(); break; case SBPROF_ZBWAITFULL: - interruptible_sleep_on(&sbp.tb_read); + DEFINE_WAIT(wait); + prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE); + schedule(); + finish_wait(&sbp.tb_read, &wait); /* XXXKW check if interrupted? */ return put_user(TB_FULL, (int *) arg); default: -- GitLab From 38b18f72587422450bd01695b471b3ae2ff4b169 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 3 Feb 2005 14:28:23 +0000 Subject: [PATCH 0902/1519] Move Sibyte Kconfig stuff into it's own Kconfig. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 218 +-------------------------------------- arch/mips/sibyte/Kconfig | 143 +++++++++++++++++++++++++ 2 files changed, 145 insertions(+), 216 deletions(-) create mode 100644 arch/mips/sibyte/Kconfig diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index bfd5014a8afe..87f860feb845 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -749,222 +749,6 @@ config MIPS_MTX1 endchoice -config SIBYTE_SB1xxx_SOC - bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)" - depends on EXPERIMENTAL - select BOOT_ELF32 - select DMA_COHERENT - select SWAP_IO_SPACE - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - -choice - prompt "BCM1xxx SOC-based board" - depends on SIBYTE_SB1xxx_SOC - default SIBYTE_SWARM - help - Enable support for boards based on the SiByte line of SOCs - from Broadcom. There are configurations for the known - evaluation boards, or you can choose "Other" and add your - own board support code. - -config SIBYTE_SWARM - bool "BCM91250A-SWARM" - select SIBYTE_SB1250 - -config SIBYTE_SENTOSA - bool "BCM91250E-Sentosa" - select SIBYTE_SB1250 - -config SIBYTE_RHONE - bool "BCM91125E-Rhone" - select SIBYTE_BCM1125H - -config SIBYTE_CARMEL - bool "BCM91120x-Carmel" - select SIBYTE_BCM1120 - -config SIBYTE_PTSWARM - bool "BCM91250PT-PTSWARM" - select SIBYTE_SB1250 - -config SIBYTE_LITTLESUR - bool "BCM91250C2-LittleSur" - select SIBYTE_SB1250 - -config SIBYTE_CRHINE - bool "BCM91120C-CRhine" - select SIBYTE_BCM1120 - -config SIBYTE_CRHONE - bool "BCM91125C-CRhone" - select SIBYTE_BCM1125 - -config SIBYTE_UNKNOWN - bool "Other" - -endchoice - -config SIBYTE_BOARD - bool - depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN - default y - -choice - prompt "BCM1xxx SOC Type" - depends on SIBYTE_UNKNOWN - default SIBYTE_UNK_BCM1250 - help - Since you haven't chosen a known evaluation board from - Broadcom, you must explicitly pick the SOC this kernel is - targetted for. - -config SIBYTE_UNK_BCM1250 - bool "BCM1250" - select SIBYTE_SB1250 - -config SIBYTE_UNK_BCM1120 - bool "BCM1120" - select SIBYTE_BCM1120 - -config SIBYTE_UNK_BCM1125 - bool "BCM1125" - select SIBYTE_BCM1125 - -config SIBYTE_UNK_BCM1125H - bool "BCM1125H" - select SIBYTE_BCM1125H - -endchoice - -config SIBYTE_SB1250 - bool - select HW_HAS_PCI - -config SIBYTE_BCM1120 - bool - select SIBYTE_BCM112X - -config SIBYTE_BCM1125 - bool - select HW_HAS_PCI - select SIBYTE_BCM112X - -config SIBYTE_BCM1125H - bool - select HW_HAS_PCI - select SIBYTE_BCM112X - -config SIBYTE_BCM112X - bool - -choice - prompt "SiByte SOC Stepping" - depends on SIBYTE_SB1xxx_SOC - -config CPU_SB1_PASS_1 - bool "1250 Pass1" - depends on SIBYTE_SB1250 - select CPU_HAS_PREFETCH - -config CPU_SB1_PASS_2_1250 - bool "1250 An" - depends on SIBYTE_SB1250 - select CPU_SB1_PASS_2 - help - Also called BCM1250 Pass 2 - -config CPU_SB1_PASS_2_2 - bool "1250 Bn" - depends on SIBYTE_SB1250 - select CPU_HAS_PREFETCH - help - Also called BCM1250 Pass 2.2 - -config CPU_SB1_PASS_4 - bool "1250 Cn" - depends on SIBYTE_SB1250 - select CPU_HAS_PREFETCH - help - Also called BCM1250 Pass 3 - -config CPU_SB1_PASS_2_112x - bool "112x Hybrid" - depends on SIBYTE_BCM112X - select CPU_SB1_PASS_2 - -config CPU_SB1_PASS_3 - bool "112x An" - depends on SIBYTE_BCM112X - select CPU_HAS_PREFETCH - -endchoice - -config CPU_SB1_PASS_2 - bool - -config SIBYTE_HAS_LDT - bool - depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H) - default y - -config SIMULATION - bool "Running under simulation" - depends on SIBYTE_SB1xxx_SOC - help - Build a kernel suitable for running under the GDB simulator. - Primarily adjusts the kernel's notion of time. - -config SIBYTE_CFE - bool "Booting from CFE" - depends on SIBYTE_SB1xxx_SOC - help - Make use of the CFE API for enumerating available memory, - controlling secondary CPUs, and possibly console output. - -config SIBYTE_CFE_CONSOLE - bool "Use firmware console" - depends on SIBYTE_CFE - help - Use the CFE API's console write routines during boot. Other console - options (VT console, sb1250 duart console, etc.) should not be - configured. - -config SIBYTE_STANDALONE - bool - depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE - default y - -config SIBYTE_STANDALONE_RAM_SIZE - int "Memory size (in megabytes)" - depends on SIBYTE_STANDALONE - default "32" - -config SIBYTE_BUS_WATCHER - bool "Support for Bus Watcher statistics" - depends on SIBYTE_SB1xxx_SOC - help - Handle and keep statistics on the bus error interrupts (COR_ECC, - BAD_ECC, IO_BUS). - -config SIBYTE_BW_TRACE - bool "Capture bus trace before bus error" - depends on SIBYTE_BUS_WATCHER - help - Run a continuous bus trace, dumping the raw data as soon as - a ZBbus error is detected. Cannot work if ZBbus profiling - is turned on, and also will interfere with JTAG-based trace - buffer activity. Raw buffer data is dumped to console, and - must be processed off-line. - -config SIBYTE_SB1250_PROF - bool "Support for SB1/SOC profiling - SB1/SCD perf counters" - depends on SIBYTE_SB1xxx_SOC - -config SIBYTE_TBPROF - bool "Support for ZBbus profiling" - depends on SIBYTE_SB1xxx_SOC - config SNI_RM200_PCI bool "Support for SNI RM200 PCI" select ARC @@ -1002,6 +786,8 @@ config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" depends on TOSHIBA_RBTX4927 +source "arch/mips/sibyte/Kconfig" + config RWSEM_GENERIC_SPINLOCK bool default y diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig new file mode 100644 index 000000000000..3618d61f004a --- /dev/null +++ b/arch/mips/sibyte/Kconfig @@ -0,0 +1,143 @@ +config SIBYTE_SB1250 + bool + select HW_HAS_PCI + select SIBYTE_HAS_LDT + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM1120 + bool + select SIBYTE_BCM112X + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM1125 + bool + select HW_HAS_PCI + select SIBYTE_BCM112X + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM1125H + bool + select HW_HAS_PCI + select SIBYTE_BCM112X + select SIBYTE_HAS_LDT + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM112X + bool + select SIBYTE_SB1xxx_SOC + +config SIBYTE_SB1xxx_SOC + bool + depends on EXPERIMENTAL + select DMA_COHERENT + select SIBYTE_CFE + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + +choice + prompt "SiByte SOC Stepping" + depends on SIBYTE_SB1xxx_SOC + +config CPU_SB1_PASS_1 + bool "1250 Pass1" + depends on SIBYTE_SB1250 + select CPU_HAS_PREFETCH + +config CPU_SB1_PASS_2_1250 + bool "1250 An" + depends on SIBYTE_SB1250 + select CPU_SB1_PASS_2 + help + Also called BCM1250 Pass 2 + +config CPU_SB1_PASS_2_2 + bool "1250 Bn" + depends on SIBYTE_SB1250 + select CPU_HAS_PREFETCH + help + Also called BCM1250 Pass 2.2 + +config CPU_SB1_PASS_4 + bool "1250 Cn" + depends on SIBYTE_SB1250 + select CPU_HAS_PREFETCH + help + Also called BCM1250 Pass 3 + +config CPU_SB1_PASS_2_112x + bool "112x Hybrid" + depends on SIBYTE_BCM112X + select CPU_SB1_PASS_2 + +config CPU_SB1_PASS_3 + bool "112x An" + depends on SIBYTE_BCM112X + select CPU_HAS_PREFETCH + +endchoice + +config CPU_SB1_PASS_2 + bool + +config SIBYTE_HAS_LDT + bool + depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H) + default y + +config SIMULATION + bool "Running under simulation" + depends on SIBYTE_SB1xxx_SOC + help + Build a kernel suitable for running under the GDB simulator. + Primarily adjusts the kernel's notion of time. + +config SIBYTE_CFE + bool "Booting from CFE" + depends on SIBYTE_SB1xxx_SOC + help + Make use of the CFE API for enumerating available memory, + controlling secondary CPUs, and possibly console output. + +config SIBYTE_CFE_CONSOLE + bool "Use firmware console" + depends on SIBYTE_CFE + help + Use the CFE API's console write routines during boot. Other console + options (VT console, sb1250 duart console, etc.) should not be + configured. + +config SIBYTE_STANDALONE + bool + depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE + default y + +config SIBYTE_STANDALONE_RAM_SIZE + int "Memory size (in megabytes)" + depends on SIBYTE_STANDALONE + default "32" + +config SIBYTE_BUS_WATCHER + bool "Support for Bus Watcher statistics" + depends on SIBYTE_SB1xxx_SOC + help + Handle and keep statistics on the bus error interrupts (COR_ECC, + BAD_ECC, IO_BUS). + +config SIBYTE_BW_TRACE + bool "Capture bus trace before bus error" + depends on SIBYTE_BUS_WATCHER + help + Run a continuous bus trace, dumping the raw data as soon as + a ZBbus error is detected. Cannot work if ZBbus profiling + is turned on, and also will interfere with JTAG-based trace + buffer activity. Raw buffer data is dumped to console, and + must be processed off-line. + +config SIBYTE_SB1250_PROF + bool "Support for SB1/SOC profiling - SB1/SCD perf counters" + depends on SIBYTE_SB1xxx_SOC + +config SIBYTE_TBPROF + bool "Support for ZBbus profiling" + depends on SIBYTE_SB1xxx_SOC -- GitLab From 925ddb04c5eee5668e7229c71580d458ed61eb9b Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 3 Feb 2005 23:06:29 +0000 Subject: [PATCH 0903/1519] Mask and ack CPU interrupts upon initialization. Keep the state of software interrupts when unmasking. Signed-off-by: Ralf Baechle --- arch/mips/kernel/irq_cpu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 2b936cf1ef70..8f8c15fa748d 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -3,6 +3,8 @@ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net * * Copyright (C) 2001 Ralf Baechle + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki * * This file define the irq handler for MIPS CPU interrupts. * @@ -37,7 +39,6 @@ static int mips_cpu_irq_base; static inline void unmask_mips_irq(unsigned int irq) { - clear_c0_cause(0x100 << (irq - mips_cpu_irq_base)); set_c0_status(0x100 << (irq - mips_cpu_irq_base)); } @@ -107,6 +108,10 @@ void __init mips_cpu_irq_init(int irq_base) { int i; + /* Mask interrupts. */ + clear_c0_status(ST0_IM); + clear_c0_cause(CAUSEF_IP); + for (i = irq_base; i < irq_base + 8; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = NULL; -- GitLab From ea7c394492cb56ff0c10ad327157f237d5bbe6b4 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 4 Feb 2005 01:34:52 +0000 Subject: [PATCH 0904/1519] Clean up SEAD interrupt initialization. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/sead/sead_int.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c index e5109657ed5a..e1dd7e009750 100644 --- a/arch/mips/mips-boards/sead/sead_int.c +++ b/arch/mips/mips-boards/sead/sead_int.c @@ -2,6 +2,7 @@ * Carsten Langgaard, carstenl@mips.com * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2004 Maciej W. Rozycki * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as @@ -21,7 +22,9 @@ */ #include #include -#include + +#include +#include #include @@ -39,13 +42,8 @@ asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs) void __init arch_init_irq(void) { - /* - * Mask out all interrupt - */ - clear_c0_status(0x0000ff00); + mips_cpu_irq_init(0); /* Now safe to set the exception vector. */ set_except_vector(0, mipsIRQ); - - mips_cpu_irq_init(0); } -- GitLab From 28ecca4786bd8af209ae65689faa6aeea80adba2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 4 Feb 2005 15:19:01 +0000 Subject: [PATCH 0905/1519] Remove old wrong bits of cache code. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 5ea84bc98c6a..c08fa366b189 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1212,9 +1212,6 @@ void __init ld_mmu_r4xx0(void) probe_pcache(); setup_scache(); - if (c->dcache.sets * c->dcache.ways > PAGE_SIZE) - c->dcache.flags |= MIPS_CACHE_ALIASES; - r4k_blast_dcache_page_setup(); r4k_blast_dcache_page_indexed_setup(); r4k_blast_dcache_setup(); -- GitLab From d1e344e500cc693139a69d29122db18190916448 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 4 Feb 2005 15:51:26 +0000 Subject: [PATCH 0906/1519] Use hardware mechanism to deal with cache aliases in the 24K. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index c08fa366b189..1466c497beab 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1011,9 +1011,17 @@ static void __init probe_pcache(void) * normally they'd suffer from aliases but magic in the hardware deals * with that for us so we don't need to take care ourselves. */ - if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000) + switch (c->cputype) { if (c->dcache.waysize > PAGE_SIZE) - c->dcache.flags |= MIPS_CACHE_ALIASES; + + case CPU_R10000: + case CPU_R12000: + break; + case CPU_24K: + if (!(read_c0_config7() & (1 << 16))) + default: + c->dcache.flags |= MIPS_CACHE_ALIASES; + } switch (c->cputype) { case CPU_20KC: -- GitLab From 0efe27617e67448dfe78e7cebde3a6f9eadf1223 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 6 Feb 2005 21:24:55 +0000 Subject: [PATCH 0907/1519] Provide functions to access cop0 config4-7 registers Signed-off-by: Ralf Baechle --- include/asm-mips/mipsregs.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index 2197aa4ce456..006354ed2e29 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -790,10 +790,18 @@ do { \ #define read_c0_config1() __read_32bit_c0_register($16, 1) #define read_c0_config2() __read_32bit_c0_register($16, 2) #define read_c0_config3() __read_32bit_c0_register($16, 3) +#define read_c0_config4() __read_32bit_c0_register($16, 4) +#define read_c0_config5() __read_32bit_c0_register($16, 5) +#define read_c0_config6() __read_32bit_c0_register($16, 6) +#define read_c0_config7() __read_32bit_c0_register($16, 7) #define write_c0_config(val) __write_32bit_c0_register($16, 0, val) #define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) #define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) #define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) +#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) +#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) +#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) +#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) /* * The WatchLo register. There may be upto 8 of them. -- GitLab From ae6aafe30917c4c9f3533471d491b5e7c2fbe61a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 6 Feb 2005 21:55:49 +0000 Subject: [PATCH 0908/1519] Move missplaced code line to the right place. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 5 ++-- arch/mips/sgi-ip27/Kconfig | 54 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 3 deletions(-) create mode 100644 arch/mips/sgi-ip27/Kconfig diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 1466c497beab..726e899486a3 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1012,15 +1012,14 @@ static void __init probe_pcache(void) * with that for us so we don't need to take care ourselves. */ switch (c->cputype) { - if (c->dcache.waysize > PAGE_SIZE) - case CPU_R10000: case CPU_R12000: break; case CPU_24K: if (!(read_c0_config7() & (1 << 16))) default: - c->dcache.flags |= MIPS_CACHE_ALIASES; + if (c->dcache.waysize > PAGE_SIZE) + c->dcache.flags |= MIPS_CACHE_ALIASES; } switch (c->cputype) { diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig new file mode 100644 index 000000000000..7b0bc4437243 --- /dev/null +++ b/arch/mips/sgi-ip27/Kconfig @@ -0,0 +1,54 @@ +#config SGI_SN0_XXL +# bool "IP27 XXL" +# depends on SGI_IP27 +# This options adds support for userspace processes upto 16TB size. +# Normally the limit is just .5TB. + +config SGI_SN0_N_MODE + bool "IP27 N-Mode" + depends on SGI_IP27 + help + The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be + configured in either N-Modes which allows for more nodes or M-Mode + which allows for more memory. Your system is most probably + running in M-Mode, so you should say N here. + +config ARCH_DISCONTIGMEM_ENABLE + bool + default y if SGI_IP27 + help + Say Y to upport efficient handling of discontiguous physical memory, + for architectures which are either NUMA (Non-Uniform Memory Access) + or have huge holes in the physical address space for other reasons. + See for more. + +config NUMA + bool "NUMA Support" + depends on SGI_IP27 + help + Say Y to compile the kernel to support NUMA (Non-Uniform Memory + Access). This option is for configuring high-end multiprocessor + server machines. If in doubt, say N. + +config MAPPED_KERNEL + bool "Mapped kernel support" + depends on SGI_IP27 + help + Change the way a Linux kernel is loaded into memory on a MIPS64 + machine. This is required in order to support text replication and + NUMA. If you need to understand it, read the source code. + +config REPLICATE_KTEXT + bool "Kernel text replication support" + depends on SGI_IP27 + help + Say Y here to enable replicating the kernel text across multiple + nodes in a NUMA cluster. This trades memory for speed. + +config REPLICATE_EXHANDLERS + bool "Exception handler replication support" + depends on SGI_IP27 + help + Say Y here to enable replicating the kernel exception handlers + across multiple nodes in a NUMA cluster. This trades memory for + speed. -- GitLab From 29c4869946f9182f5d5f76502ac5a4a71b3b3e62 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Feb 2005 01:27:14 +0000 Subject: [PATCH 0909/1519] It works better when including arch/mips/sgi-ip27/Kconfig ... Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 87f860feb845..312b6975094f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -786,6 +786,7 @@ config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" depends on TOSHIBA_RBTX4927 +source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" config RWSEM_GENERIC_SPINLOCK -- GitLab From 54176736f734ca3a1f27416d8e5804981a627076 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Feb 2005 02:54:29 +0000 Subject: [PATCH 0910/1519] More oprofile bits for MIPS32-style performance counters. The code to bolt this into the actual hardware interrupt is yet missing from this commit. Signed-off-by: Ralf Baechle FEXPORT(ret_from_fork) --- arch/mips/oprofile/Kconfig | 2 +- arch/mips/oprofile/common.c | 28 ++-- arch/mips/oprofile/op_impl.h | 5 + arch/mips/oprofile/op_model_mipsxx.c | 215 +++++++++++++++++++++++++++ 4 files changed, 238 insertions(+), 12 deletions(-) create mode 100644 arch/mips/oprofile/op_model_mipsxx.c diff --git a/arch/mips/oprofile/Kconfig b/arch/mips/oprofile/Kconfig index 19d37730b664..55feaf798596 100644 --- a/arch/mips/oprofile/Kconfig +++ b/arch/mips/oprofile/Kconfig @@ -11,7 +11,7 @@ config PROFILING config OPROFILE tristate "OProfile system profiling (EXPERIMENTAL)" - depends on PROFILING + depends on PROFILING && EXPERIMENTAL help OProfile is a profiling system capable of profiling the whole system, include the kernel, kernel modules, libraries, diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index ab65ce3d471a..dd2cc42f1b6d 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -3,7 +3,8 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2004 by Ralf Baechle + * Copyright (C) 2004, 2005 Ralf Baechle + * Copyright (C) 2005 MIPS Technologies, Inc. */ #include #include @@ -45,10 +46,10 @@ static int op_mips_create_files(struct super_block * sb, struct dentry * root) oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); - /* Dummies. */ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); oprofilefs_create_ulong(sb, dir, "exl", &ctr[i].exl); + /* Dummy. */ oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); } @@ -68,9 +69,10 @@ static void op_mips_stop(void) on_each_cpu(model->cpu_stop, NULL, 0, 1); } -void __init oprofile_arch_init(struct oprofile_operations *ops) +int __init oprofile_arch_init(struct oprofile_operations *ops) { struct op_mips_model *lmodel = NULL; + int res; switch (current_cpu_data.cputype) { case CPU_24K: @@ -83,21 +85,25 @@ void __init oprofile_arch_init(struct oprofile_operations *ops) }; if (!lmodel) - return; + return -ENODEV; - if (lmodel->init()) - return; + res = lmodel->init(); + if (res) + return res; model = lmodel; - ops->create_files = op_mips_create_files; - ops->setup = op_mips_setup; - ops->start = op_mips_start; - ops->stop = op_mips_stop; - ops->cpu_type = lmodel->cpu_type; + ops->create_files = op_mips_create_files; + ops->setup = op_mips_setup; + //ops->shutdown = op_mips_shutdown; + ops->start = op_mips_start; + ops->stop = op_mips_stop; + ops->cpu_type = lmodel->cpu_type; printk(KERN_INFO "oprofile: using %s performance monitoring.\n", lmodel->cpu_type); + + return 0; } void oprofile_arch_exit(void) diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h index 9f5cdff041be..f0121557047d 100644 --- a/arch/mips/oprofile/op_impl.h +++ b/arch/mips/oprofile/op_impl.h @@ -10,6 +10,11 @@ #ifndef OP_IMPL_H #define OP_IMPL_H 1 +struct pt_regs; + +extern void null_perf_irq(struct pt_regs *regs); +extern void (*perf_irq)(struct pt_regs *regs); + /* Per-counter configuration as set via oprofilefs. */ struct op_counter_config { unsigned long enabled; diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c new file mode 100644 index 000000000000..d36b64dfcb2f --- /dev/null +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -0,0 +1,215 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004, 2005 by Ralf Baechle + * Copyright (C) 2005 by MIPS Technologies, Inc. + */ +#include +#include +#include + +#include "op_impl.h" + +#define M_PERFCTL_EXL (1UL << 0) +#define M_PERFCTL_KERNEL (1UL << 1) +#define M_PERFCTL_SUPERVISOR (1UL << 2) +#define M_PERFCTL_USER (1UL << 3) +#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4) +#define M_PERFCTL_EVENT(event) ((event) << 5) +#define M_PERFCTL_WIDE (1UL << 30) +#define M_PERFCTL_MORE (1UL << 31) + +#define M_COUNTER_OVERFLOW (1UL << 31) + +struct op_mips_model op_model_mipsxx; + +static struct mipsxx_register_config { + unsigned int control[4]; + unsigned int counter[4]; +} reg; + +/* Compute all of the registers in preparation for enabling profiling. */ + +static void mipsxx_reg_setup(struct op_counter_config *ctr) +{ + unsigned int counters = op_model_mipsxx.num_counters; + int i; + + /* Compute the performance counter control word. */ + /* For now count kernel and user mode */ + for (i = 0; i < counters; i++) { + reg.control[i] = 0; + reg.counter[i] = 0; + + if (!ctr[i].enabled) + continue; + + reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) | + M_PERFCTL_INTERRUPT_ENABLE; + if (ctr[i].kernel) + reg.control[i] |= M_PERFCTL_KERNEL; + if (ctr[i].user) + reg.control[i] |= M_PERFCTL_USER; + if (ctr[i].exl) + reg.control[i] |= M_PERFCTL_EXL; + reg.counter[i] = 0x80000000 - ctr[i].count; + } +} + +/* Program all of the registers in preparation for enabling profiling. */ + +static void mipsxx_cpu_setup (void *args) +{ + unsigned int counters = op_model_mipsxx.num_counters; + + switch (counters) { + case 4: + write_c0_perfctrl3(0); + write_c0_perfcntr3(reg.counter[3]); + case 3: + write_c0_perfctrl2(0); + write_c0_perfcntr2(reg.counter[2]); + case 2: + write_c0_perfctrl1(0); + write_c0_perfcntr1(reg.counter[1]); + case 1: + write_c0_perfctrl0(0); + write_c0_perfcntr0(reg.counter[0]); + } +} + +/* Start all counters on current CPU */ +static void mipsxx_cpu_start(void *args) +{ + unsigned int counters = op_model_mipsxx.num_counters; + + switch (counters) { + case 4: + write_c0_perfctrl3(reg.control[3]); + case 3: + write_c0_perfctrl2(reg.control[2]); + case 2: + write_c0_perfctrl1(reg.control[1]); + case 1: + write_c0_perfctrl0(reg.control[0]); + } +} + +/* Stop all counters on current CPU */ +static void mipsxx_cpu_stop(void *args) +{ + unsigned int counters = op_model_mipsxx.num_counters; + + switch (counters) { + case 4: + write_c0_perfctrl3(0); + case 3: + write_c0_perfctrl2(0); + case 2: + write_c0_perfctrl1(0); + case 1: + write_c0_perfctrl0(0); + } +} + +static void mipsxx_perfcount_handler(struct pt_regs *regs) +{ + unsigned int counters = op_model_mipsxx.num_counters; + unsigned int control; + unsigned int counter; + + switch (counters) { +#define HANDLE_COUNTER(n) \ + case n + 1: \ + control = read_c0_perfctrl ## n(); \ + counter = read_c0_perfcntr ## n(); \ + if ((control & M_PERFCTL_INTERRUPT_ENABLE) && \ + (counter & M_COUNTER_OVERFLOW)) { \ + oprofile_add_sample(regs, n); \ + write_c0_perfcntr ## n(reg.counter[n]); \ + } + HANDLE_COUNTER(3) + HANDLE_COUNTER(2) + HANDLE_COUNTER(1) + HANDLE_COUNTER(0) + } +} + +#define M_CONFIG1_PC (1 << 4) + +static inline int n_counters(void) +{ + if (!(read_c0_config1() & M_CONFIG1_PC)) + return 0; + if (!(read_c0_perfctrl0() & M_PERFCTL_MORE)) + return 1; + if (!(read_c0_perfctrl1() & M_PERFCTL_MORE)) + return 2; + if (!(read_c0_perfctrl2() & M_PERFCTL_MORE)) + return 3; + + return 4; +} + +static inline void reset_counters(int counters) +{ + switch (counters) { + case 4: + write_c0_perfctrl3(0); + write_c0_perfcntr3(0); + case 3: + write_c0_perfctrl2(0); + write_c0_perfcntr2(0); + case 2: + write_c0_perfctrl1(0); + write_c0_perfcntr1(0); + case 1: + write_c0_perfctrl0(0); + write_c0_perfcntr0(0); + } +} + +static int __init mipsxx_init(void) +{ + int counters; + + counters = n_counters(); + if (counters == 0) + return -ENODEV; + + reset_counters(counters); + + op_model_mipsxx.num_counters = counters; + switch (current_cpu_data.cputype) { + case CPU_24K: + op_model_mipsxx.cpu_type = "mips/24K"; + break; + + default: + printk(KERN_ERR "Profiling unsupported for this CPU\n"); + + return -ENODEV; + } + + perf_irq = mipsxx_perfcount_handler; + + return 0; +} + +static void mipsxx_exit(void) +{ + reset_counters(op_model_mipsxx.num_counters); + + perf_irq = null_perf_irq; +} + +struct op_mips_model op_model_mipsxx = { + .reg_setup = mipsxx_reg_setup, + .cpu_setup = mipsxx_cpu_setup, + .init = mipsxx_init, + .exit = mipsxx_exit, + .cpu_start = mipsxx_cpu_start, + .cpu_stop = mipsxx_cpu_stop, +}; -- GitLab From a18815abcdfd9f10a6ce6fbec3ad1af1ae101ce7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Feb 2005 02:54:29 +0000 Subject: [PATCH 0911/1519] Use preempt_schedule_irq. Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index be0354a14e26..ebc1a5d4f8b8 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -48,6 +48,7 @@ resume_userspace: #ifdef CONFIG_PREEMPT resume_kernel: + local_irq_disable lw t0, TI_PRE_COUNT($28) bnez t0, restore_all need_resched: @@ -59,11 +60,7 @@ need_resched: beqz t0, restore_all li t0, PREEMPT_ACTIVE sw t0, TI_PRE_COUNT($28) - local_irq_enable - jal schedule - sw zero, TI_PRE_COUNT($28) - local_irq_disable - b need_resched + jal preempt_schedule_irq #endif FEXPORT(ret_from_fork) -- GitLab From cc26b815ddde4168cd853be9e62ecacd392e3f64 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Feb 2005 12:14:00 +0000 Subject: [PATCH 0912/1519] rm9000_init() really is __init code. Signed-off-by: Ralf Baechle --- arch/mips/oprofile/op_model_rm9000.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c index bee47793cb1a..9b75e41c78ef 100644 --- a/arch/mips/oprofile/op_model_rm9000.c +++ b/arch/mips/oprofile/op_model_rm9000.c @@ -5,6 +5,7 @@ * * Copyright (C) 2004 by Ralf Baechle */ +#include #include #include #include @@ -114,7 +115,7 @@ static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id, return IRQ_HANDLED; } -static int rm9000_init(void) +static int __init rm9000_init(void) { return request_irq(rm9000_perfcount_irq, rm9000_perfcount_handler, 0, "Perfcounter", NULL); -- GitLab From 84fd089a425f055ecf4a6a72f2509ccb98314b8f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Feb 2005 16:13:07 +0000 Subject: [PATCH 0913/1519] Delete duplicate copy of fixrange_init. Signed-off-by: Ralf Baechle --- arch/mips/mm/init.c | 4 ++-- arch/mips/mm/pgtable-32.c | 32 +------------------------------- include/asm-mips/fixmap.h | 7 +++++++ 3 files changed, 10 insertions(+), 33 deletions(-) diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index dc6830b10fab..77cbccaff955 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -96,8 +96,8 @@ static void __init kmap_init(void) kmap_prot = PAGE_KERNEL; } -#ifdef CONFIG_64BIT -static void __init fixrange_init(unsigned long start, unsigned long end, +#ifdef CONFIG_32BIT +void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { pgd_t *pgd; diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c index 4f07f81e8500..74492618f2ae 100644 --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -10,6 +10,7 @@ #include #include #include +#include #include void pgd_init(unsigned long page) @@ -29,37 +30,6 @@ void pgd_init(unsigned long page) } } -#ifdef CONFIG_HIGHMEM -static void __init fixrange_init (unsigned long start, unsigned long end, - pgd_t *pgd_base) -{ - pgd_t *pgd; - pmd_t *pmd; - pte_t *pte; - int i, j; - unsigned long vaddr; - - vaddr = start; - i = __pgd_offset(vaddr); - j = __pmd_offset(vaddr); - pgd = pgd_base + i; - - for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) { - pmd = (pmd_t *)pgd; - for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) { - if (pmd_none(*pmd)) { - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); - set_pmd(pmd, __pmd((unsigned long)pte)); - if (pte != pte_offset_kernel(pmd, 0)) - BUG(); - } - vaddr += PMD_SIZE; - } - j = 0; - } -} -#endif - void __init pagetable_init(void) { #ifdef CONFIG_HIGHMEM diff --git a/include/asm-mips/fixmap.h b/include/asm-mips/fixmap.h index 26b6a90a690b..73a3028dd9f9 100644 --- a/include/asm-mips/fixmap.h +++ b/include/asm-mips/fixmap.h @@ -107,4 +107,11 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr) return __virt_to_fix(vaddr); } +/* + * Called from pgtable_init() + */ +extern void fixrange_init(unsigned long start, unsigned long end, + pgd_t *pgd_base); + + #endif -- GitLab From a95970f323a273230b36d23da1426f8acc5e25c0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Feb 2005 21:41:32 +0000 Subject: [PATCH 0914/1519] 20Kc and SB1 don't suffer from aliases. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 726e899486a3..aa830c3cdebb 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1012,8 +1012,10 @@ static void __init probe_pcache(void) * with that for us so we don't need to take care ourselves. */ switch (c->cputype) { + case CPU_20KC: case CPU_R10000: case CPU_R12000: + case CPU_SB1: break; case CPU_24K: if (!(read_c0_config7() & (1 << 16))) -- GitLab From 55a6feb671885d3a1758dad20b53224a038349bc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Feb 2005 21:52:35 +0000 Subject: [PATCH 0915/1519] Add a few more PrId vendor IDs. Signed-off-by: Ralf Baechle --- include/asm-mips/cpu.h | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index dec060b49556..c60281799801 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -22,12 +22,17 @@ spec. */ -#define PRID_COMP_LEGACY 0x000000 -#define PRID_COMP_MIPS 0x010000 -#define PRID_COMP_BROADCOM 0x020000 -#define PRID_COMP_ALCHEMY 0x030000 -#define PRID_COMP_SIBYTE 0x040000 -#define PRID_COMP_SANDCRAFT 0x050000 +#define PRID_COMP_LEGACY 0x000000 +#define PRID_COMP_MIPS 0x010000 +#define PRID_COMP_BROADCOM 0x020000 +#define PRID_COMP_ALCHEMY 0x030000 +#define PRID_COMP_SIBYTE 0x040000 +#define PRID_COMP_SANDCRAFT 0x050000 +#define PRID_COMP_PHILIPS 0x060000 +#define PRID_COMP_TOSHIBA 0x070000 +#define PRID_COMP_LSI 0x080000 +#define PRID_COMP_LEXRA 0x0b0000 + /* * Assigned values for the product ID register. In order to detect a -- GitLab From 505403b6a02aefc47c038acf56b719497b720012 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Feb 2005 21:53:39 +0000 Subject: [PATCH 0916/1519] 25Kf is also physically indexed. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index aa830c3cdebb..8ffb9f809ed9 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1013,6 +1013,7 @@ static void __init probe_pcache(void) */ switch (c->cputype) { case CPU_20KC: + case CPU_25KF: case CPU_R10000: case CPU_R12000: case CPU_SB1: -- GitLab From 26852d5cdb2bac01f2a48b815194a045e8a8e300 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 9 Feb 2005 12:59:39 +0000 Subject: [PATCH 0917/1519] Fix ptrace aliasing issue in copy_from_user_page / copy_to_user_page. Signed-off-by: Ralf Baechle --- include/asm-mips/cacheflush.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h index 635f1bfb403e..3780c9f9354a 100644 --- a/include/asm-mips/cacheflush.h +++ b/include/asm-mips/cacheflush.h @@ -55,11 +55,17 @@ extern void (*flush_icache_range)(unsigned long start, unsigned long end); #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ + if (cpu_has_dc_aliases) \ + flush_cache_page(vma, vaddr); \ memcpy(dst, (void *) src, len); \ flush_icache_page(vma, page); \ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) +do { \ + if (cpu_has_dc_aliases) \ + flush_cache_page(vma, vaddr); \ + memcpy(dst, src, len); \ +} while (0) extern void (*flush_cache_sigtramp)(unsigned long addr); extern void (*flush_icache_all)(void); -- GitLab From 57f0060b8a2bb2a70a4cce1a37d5e0158cea92a6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 10 Feb 2005 12:00:06 +0000 Subject: [PATCH 0918/1519] Document why calling smp_call_function will deadlock when called with interrupts disabled. Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index af5cd3b8a396..1d3a4b501949 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -121,7 +121,19 @@ struct call_data_struct *call_data; * or are or have executed. * * You must not call this function with disabled interrupts or from a - * hardware interrupt handler or from a bottom half handler. + * hardware interrupt handler or from a bottom half handler: + * + * CPU A CPU B + * Disable interrupts + * smp_call_function() + * Take call_lock + * Send IPIs + * Wait for all cpus to acknowledge IPI + * CPU A has not responded, spin waiting + * for cpu A to respond, holding call_lock + * smp_call_function() + * Spin waiting for call_lock + * Deadlock Deadlock */ int smp_call_function (void (*func) (void *info), void *info, int retry, int wait) -- GitLab From c6e8b587718c486b55c2ebecc6de231a30beba35 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 10 Feb 2005 12:19:59 +0000 Subject: [PATCH 0919/1519] Update MIPS to use the 4-level pagetable code thereby getting rid of the compacrapability headers. Signed-off-by: Ralf Baechle --- arch/mips/lib-32/dump_tlb.c | 10 ++++-- arch/mips/lib-32/r3k_dump_tlb.c | 10 ++++-- arch/mips/lib-64/dump_tlb.c | 10 ++++-- arch/mips/mm/c-r3k.c | 4 ++- arch/mips/mm/c-r4k.c | 4 ++- arch/mips/mm/c-tx39.c | 4 ++- arch/mips/mm/fault.c | 10 ++++-- arch/mips/mm/init.c | 28 ++++++++++------- arch/mips/mm/ioremap.c | 15 +++++---- arch/mips/mm/pgtable-32.c | 4 ++- arch/mips/mm/tlb-andes.c | 4 ++- arch/mips/mm/tlb-r4k.c | 4 ++- include/asm-mips/page.h | 42 ++++++++++++++++++++----- include/asm-mips/pgalloc.h | 19 +++++++++--- include/asm-mips/pgtable-32.h | 40 +++++++----------------- include/asm-mips/pgtable-64.h | 55 +++++++++++++++++++-------------- include/asm-mips/pgtable.h | 13 +++++--- 17 files changed, 177 insertions(+), 99 deletions(-) diff --git a/arch/mips/lib-32/dump_tlb.c b/arch/mips/lib-32/dump_tlb.c index 019ac8f005d7..f6d134feb12a 100644 --- a/arch/mips/lib-32/dump_tlb.c +++ b/arch/mips/lib-32/dump_tlb.c @@ -139,6 +139,7 @@ void dump_tlb_nonwired(void) void dump_list_process(struct task_struct *t, void *address) { pgd_t *page_dir, *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte, page; unsigned long addr, val; @@ -162,7 +163,10 @@ void dump_list_process(struct task_struct *t, void *address) pgd = pgd_offset(t->mm, addr); printk("pgd == %08x, ", (unsigned int) pgd); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + printk("pud == %08x, ", (unsigned int) pud); + + pmd = pmd_offset(pud, addr); printk("pmd == %08x, ", (unsigned int) pmd); pte = pte_offset(pmd, addr); @@ -195,13 +199,15 @@ void dump_list_current(void *address) unsigned int vtop(void *address) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; unsigned int addr, paddr; addr = (unsigned long) address; pgd = pgd_offset(current->mm, addr); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + pmd = pmd_offset(pud, addr); pte = pte_offset(pmd, addr); paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK; paddr |= (addr & ~PAGE_MASK); diff --git a/arch/mips/lib-32/r3k_dump_tlb.c b/arch/mips/lib-32/r3k_dump_tlb.c index a878224004e5..4f2cb74f0766 100644 --- a/arch/mips/lib-32/r3k_dump_tlb.c +++ b/arch/mips/lib-32/r3k_dump_tlb.c @@ -105,6 +105,7 @@ void dump_tlb_nonwired(void) void dump_list_process(struct task_struct *t, void *address) { pgd_t *page_dir, *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte, page; unsigned int addr; @@ -121,7 +122,10 @@ void dump_list_process(struct task_struct *t, void *address) pgd = pgd_offset(t->mm, addr); printk("pgd == %08x, ", (unsigned int) pgd); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + printk("pud == %08x, ", (unsigned int) pud); + + pmd = pmd_offset(pud, addr); printk("pmd == %08x, ", (unsigned int) pmd); pte = pte_offset(pmd, addr); @@ -149,13 +153,15 @@ void dump_list_current(void *address) unsigned int vtop(void *address) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; unsigned int addr, paddr; addr = (unsigned long) address; pgd = pgd_offset(current->mm, addr); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + pmd = pmd_offset(pud, addr); pte = pte_offset(pmd, addr); paddr = (KSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK; paddr |= (addr & ~PAGE_MASK); diff --git a/arch/mips/lib-64/dump_tlb.c b/arch/mips/lib-64/dump_tlb.c index 42f88e055b4c..11a5f015f040 100644 --- a/arch/mips/lib-64/dump_tlb.c +++ b/arch/mips/lib-64/dump_tlb.c @@ -140,6 +140,7 @@ void dump_tlb_nonwired(void) void dump_list_process(struct task_struct *t, void *address) { pgd_t *page_dir, *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte, page; unsigned long addr, val; @@ -155,7 +156,10 @@ void dump_list_process(struct task_struct *t, void *address) pgd = pgd_offset(t->mm, addr); printk("pgd == %016lx\n", (unsigned long) pgd); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + printk("pud == %016lx\n", (unsigned long) pud); + + pmd = pmd_offset(pud, addr); printk("pmd == %016lx\n", (unsigned long) pmd); pte = pte_offset(pmd, addr); @@ -184,13 +188,15 @@ void dump_list_current(void *address) unsigned int vtop(void *address) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; unsigned int addr, paddr; addr = (unsigned long) address; pgd = pgd_offset(current->mm, addr); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + pmd = pmd_offset(pud, addr); pte = pte_offset(pmd, addr); paddr = (CKSEG1 | (unsigned int) pte_val(*pte)) & PAGE_MASK; paddr |= (addr & ~PAGE_MASK); diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index c659f99eb39a..03492a5c21f1 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -221,12 +221,14 @@ static inline unsigned long get_phys_page (unsigned long addr, struct mm_struct *mm) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; unsigned long physpage; pgd = pgd_offset(mm, addr); - pmd = pmd_offset(pgd, addr); + pud = pud_offset(pgd, addr); + pmd = pmd_offset(pud, addr); pte = pte_offset(pmd, addr); if ((physpage = pte_val(*pte)) & _PAGE_VALID) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 8ffb9f809ed9..b165b73e2583 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -372,12 +372,14 @@ static inline void local_r4k_flush_cache_page(void *args) int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; pgd_t *pgdp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; page &= PAGE_MASK; pgdp = pgd_offset(mm, page); - pmdp = pmd_offset(pgdp, page); + pudp = pud_offset(pgdp, page); + pmdp = pmd_offset(pudp, page); ptep = pte_offset(pmdp, page); /* diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index ff5afab64b2f..5054a0ed2b6d 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -183,6 +183,7 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; pgd_t *pgdp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; @@ -195,7 +196,8 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page page &= PAGE_MASK; pgdp = pgd_offset(mm, page); - pmdp = pmd_offset(pgdp, page); + pudp = pud_offset(pgdp, page); + pmdp = pmd_offset(pudp, page); ptep = pte_offset(pmdp, page); /* diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index ec8077c74e9c..345a4d6ec20f 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -212,6 +212,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write, */ int offset = __pgd_offset(address); pgd_t *pgd, *pgd_k; + pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; pte_t *pte_k; @@ -222,8 +223,13 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write, goto no_context; set_pgd(pgd, *pgd_k); - pmd = pmd_offset(pgd, address); - pmd_k = pmd_offset(pgd_k, address); + pud = pud_offset(pgd, address); + pud_k = pud_offset(pgd_k, address); + if (!pud_present(*pud_k)) + goto no_context; + + pmd = pmd_offset(pud, address); + pmd_k = pmd_offset(pud_k, address); if (!pmd_present(*pmd_k)) goto no_context; set_pmd(pmd, *pmd_k); diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 77cbccaff955..5e1967f14255 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -83,7 +83,7 @@ pte_t *kmap_pte; pgprot_t kmap_prot; #define kmap_get_fixmap_pte(vaddr) \ - pte_offset_kernel(pmd_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)) + pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) static void __init kmap_init(void) { @@ -101,26 +101,32 @@ void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { pgd_t *pgd; + pud_t *pud; pmd_t *pmd; pte_t *pte; - int i, j; + int i, j, k; unsigned long vaddr; vaddr = start; i = __pgd_offset(vaddr); - j = __pmd_offset(vaddr); + j = __pud_offset(vaddr); + k = __pmd_offset(vaddr); pgd = pgd_base + i; for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) { - pmd = (pmd_t *)pgd; - for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) { - if (pmd_none(*pmd)) { - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); - set_pmd(pmd, __pmd(pte)); - if (pte != pte_offset_kernel(pmd, 0)) - BUG(); + pud = (pud_t *)pgd; + for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) { + pmd = (pmd_t *)pud; + for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) { + if (pmd_none(*pmd)) { + pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); + set_pmd(pmd, __pmd(pte)); + if (pte != pte_offset_kernel(pmd, 0)) + BUG(); + } + vaddr += PMD_SIZE; } - vaddr += PMD_SIZE; + k = 0; } j = 0; } diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c index adf352273f63..d06107360db4 100644 --- a/arch/mips/mm/ioremap.c +++ b/arch/mips/mm/ioremap.c @@ -79,9 +79,14 @@ static int remap_area_pages(unsigned long address, phys_t phys_addr, BUG(); spin_lock(&init_mm.page_table_lock); do { + pud_t *pud; pmd_t *pmd; - pmd = pmd_alloc(&init_mm, dir, address); + error = -ENOMEM; + pud = pud_alloc(&init_mm, dir, address); + if (!pud) + break; + pmd = pmd_alloc(&init_mm, pud, address); if (!pmd) break; if (remap_area_pmd(pmd, address, end - address, @@ -141,7 +146,7 @@ void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags) */ if (IS_LOW512(phys_addr) && IS_LOW512(last_addr) && flags == _CACHE_UNCACHED) - return (void *) KSEG1ADDR(phys_addr); + return (void *) CKSEG1ADDR(phys_addr); /* * Don't allow anybody to remap normal RAM that we're using.. @@ -180,7 +185,7 @@ void * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags) return (void *) (offset + (char *)addr); } -#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == KSEG1) +#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) void __iounmap(volatile void __iomem *addr) { @@ -190,10 +195,8 @@ void __iounmap(volatile void __iomem *addr) return; p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); - if (!p) { + if (!p) printk(KERN_ERR "iounmap: bad address %p\n", addr); - return; - } kfree(p); } diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c index 74492618f2ae..4a3c4919e314 100644 --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -35,6 +35,7 @@ void __init pagetable_init(void) #ifdef CONFIG_HIGHMEM unsigned long vaddr; pgd_t *pgd, *pgd_base; + pud_t *pud; pmd_t *pmd; pte_t *pte; #endif @@ -60,7 +61,8 @@ void __init pagetable_init(void) fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); pgd = swapper_pg_dir + __pgd_offset(vaddr); - pmd = pmd_offset(pgd, vaddr); + pud = pud_offset(pgd, vaddr); + pmd = pmd_offset(pud, vaddr); pte = pte_offset_kernel(pmd, vaddr); pkmap_page_table = pte; #endif diff --git a/arch/mips/mm/tlb-andes.c b/arch/mips/mm/tlb-andes.c index 167e08e9661a..3f422a849c41 100644 --- a/arch/mips/mm/tlb-andes.c +++ b/arch/mips/mm/tlb-andes.c @@ -195,6 +195,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) { unsigned long flags; pgd_t *pgdp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; int idx, pid; @@ -220,7 +221,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) write_c0_entryhi(address | (pid)); pgdp = pgd_offset(vma->vm_mm, address); tlb_probe(); - pmdp = pmd_offset(pgdp, address); + pudp = pud_offset(pgdp, address); + pmdp = pmd_offset(pudp, address); idx = read_c0_index(); ptep = pte_offset_map(pmdp, address); write_c0_entrylo0(pte_val(*ptep++) >> 6); diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 09249a756016..08702202758d 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -227,6 +227,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) { unsigned long flags; pgd_t *pgdp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; int idx, pid; @@ -246,7 +247,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) mtc0_tlbw_hazard(); tlb_probe(); BARRIER; - pmdp = pmd_offset(pgdp, address); + pudp = pud_offset(pgdp, address); + pmdp = pmd_offset(pudp, address); idx = read_c0_index(); ptep = pte_offset_map(pmdp, address); diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index 652b6d67a571..ee25a779bf49 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -87,22 +87,48 @@ static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, typedef struct { unsigned long pte; } pte_t; #define pte_val(x) ((x).pte) #endif +#define __pte(x) ((pte_t) { (x) } ) -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; +/* + * For 3-level pagetables we defines these ourselves, for 2-level the + * definitions are supplied by . + */ +#ifdef CONFIG_64BIT +typedef struct { unsigned long pmd; } pmd_t; #define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) +#define __pmd(x) ((pmd_t) { (x) } ) -#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t))) +#endif -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) +/* + * Right now we don't support 4-level pagetables, so all pud-related + * definitions come from . + */ + +/* + * Finall the top of the hierarchy, the pgd + */ +typedef struct { unsigned long pgd; } pgd_t; +#define pgd_val(x) ((x).pgd) #define __pgd(x) ((pgd_t) { (x) } ) + +/* + * Manipulate page protection bits + */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) #define __pgprot(x) ((pgprot_t) { (x) } ) +/* + * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd + * pair of pages we only have a single global bit per pair of pages. When + * writing to the TLB make sure we always have the bit set for both pages + * or none. This macro is used to access the `buddy' of the pte we're just + * working on. + */ +#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t))) + #endif /* !__ASSEMBLY__ */ /* to align the pointer to the (next) page boundary */ diff --git a/include/asm-mips/pgalloc.h b/include/asm-mips/pgalloc.h index ce57288d43bd..fe1df572318b 100644 --- a/include/asm-mips/pgalloc.h +++ b/include/asm-mips/pgalloc.h @@ -25,11 +25,23 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, set_pmd(pmd, __pmd((unsigned long)page_address(pte))); } +/* + * Initialize a new pmd table with invalid pointers. + */ +extern void pmd_init(unsigned long page, unsigned long pagetable); + +#ifdef CONFIG_64BIT + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + set_pud(pud, __pud((unsigned long)pmd)); +} +#endif + /* * Initialize a new pgd / pmd table with invalid pointers. */ extern void pgd_init(unsigned long page); -extern void pmd_init(unsigned long page, unsigned long pagetable); static inline pgd_t *pgd_alloc(struct mm_struct *mm) { @@ -86,21 +98,18 @@ static inline void pte_free(struct page *pte) #define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte)) #ifdef CONFIG_32BIT -#define pgd_populate(mm, pmd, pte) BUG() /* * allocating and freeing a pmd is trivial: the 1-entry pmd is * inside the pgd, so has no extra memory associated with it. */ -#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) #define pmd_free(x) do { } while (0) #define __pmd_free_tlb(tlb,x) do { } while (0) + #endif #ifdef CONFIG_64BIT -#define pgd_populate(mm, pgd, pmd) set_pgd(pgd, __pgd(pmd)) - static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) { pmd_t *pmd; diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h index 7fec93b76da9..8d66303eabc4 100644 --- a/include/asm-mips/pgtable-32.h +++ b/include/asm-mips/pgtable-32.h @@ -17,6 +17,8 @@ #include #include +#include + /* * - add_wired_entry() add a fixed TLB entry, and move wired register */ @@ -42,35 +44,35 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, */ /* PMD_SHIFT determines the size of the area a second-level page table can map */ -#ifdef CONFIG_64BIT_PHYS_ADDR -#define PMD_SHIFT 21 -#else -#define PMD_SHIFT 22 -#endif #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE-1)) /* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT PMD_SHIFT +#ifdef CONFIG_64BIT_PHYS_ADDR +#define PGDIR_SHIFT 21 +#else +#define PGDIR_SHIFT 22 +#endif #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* * Entries per page directory level: we use two-level, so - * we don't really have any PMD directory physically. + * we don't really have any PUD/PMD directory physically. */ #ifdef CONFIG_64BIT_PHYS_ADDR #define PGD_ORDER 1 -#define PMD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 1 #define PTE_ORDER 0 #else #define PGD_ORDER 0 -#define PMD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 1 #define PTE_ORDER 0 #endif #define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t)) -#define PTRS_PER_PMD 1 #define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) #define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE) @@ -91,8 +93,6 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, #define pte_ERROR(e) \ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) #endif -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) @@ -120,16 +120,6 @@ static inline void pmd_clear(pmd_t *pmdp) pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); } -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -static inline void pgd_clear(pgd_t *pgdp) { } - #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) #define pte_page(x) pfn_to_page(pte_pfn(x)) #define pte_pfn(x) ((unsigned long)((x).pte_high >> 6)) @@ -166,12 +156,6 @@ pfn_pte(unsigned long pfn, pgprot_t prot) /* to find an entry in a page-table-directory */ #define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr)) -/* Find an entry in the second-level page table.. */ -static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) -{ - return (pmd_t *) dir; -} - /* Find an entry in the third-level page table.. */ #define __pte_offset(address) \ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h index 1011e0635f56..ac5517fa1ee4 100644 --- a/include/asm-mips/pgtable-64.h +++ b/include/asm-mips/pgtable-64.h @@ -16,13 +16,15 @@ #include #include +#include + /* * Each address space has 2 4K pages as its page directory, giving 1024 * (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a - * pair of 4K pages, giving 1024 (== PTRS_PER_PMD) 8 byte pointers to - * page tables. Each page table is a single 4K page, giving 512 (== - * PTRS_PER_PTE) 8 byte ptes. Each pgde is initialized to point to - * invalid_pmd_table, each pmde is initialized to point to + * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page + * tables. Each page table is also a single 4K page, giving 512 (== + * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to + * invalid_pmd_table, each pmd entry is initialized to point to * invalid_pte_table, each pte is initialized to 0. When memory is low, * and a pmd table or a page table allocation fails, empty_bad_pmd_table * and empty_bad_page_table is returned back to higher layer code, so @@ -36,17 +38,17 @@ */ /* PMD_SHIFT determines the size of the area a second-level page table can map */ -#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT - 3)) +#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3)) #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE-1)) /* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + 1 - 3)) +#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3)) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* - * For 4kB page size we use a 3 level page tree and a 8kB pmd and pgds which + * For 4kB page size we use a 3 level page tree and an 8kB pud, which * permits us mapping 40 bits of virtual address space. * * We used to implement 41 bits by having an order 1 pmd level but that seemed @@ -65,21 +67,25 @@ */ #ifdef CONFIG_PAGE_SIZE_4KB #define PGD_ORDER 1 +#define PUD_ORDER aieeee_attempt_to_allocate_pud #define PMD_ORDER 0 #define PTE_ORDER 0 #endif #ifdef CONFIG_PAGE_SIZE_8KB #define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud #define PMD_ORDER 0 #define PTE_ORDER 0 #endif #ifdef CONFIG_PAGE_SIZE_16KB #define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud #define PMD_ORDER 0 #define PTE_ORDER 0 #endif #ifdef CONFIG_PAGE_SIZE_64KB #define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud #define PMD_ORDER 0 #define PTE_ORDER 0 #endif @@ -102,10 +108,10 @@ #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) -extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)]; -extern pte_t empty_bad_page_table[PAGE_SIZE/sizeof(pte_t)]; -extern pmd_t invalid_pmd_table[2*PAGE_SIZE/sizeof(pmd_t)]; -extern pmd_t empty_bad_pmd_table[2*PAGE_SIZE/sizeof(pmd_t)]; +extern pte_t invalid_pte_table[PTRS_PER_PTE]; +extern pte_t empty_bad_page_table[PTRS_PER_PTE]; +extern pmd_t invalid_pmd_table[PTRS_PER_PMD]; +extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD]; /* * Empty pmd entries point to the invalid_pte_table. @@ -130,21 +136,24 @@ static inline void pmd_clear(pmd_t *pmdp) /* * Empty pgd entries point to the invalid_pmd_table. */ -static inline int pgd_none(pgd_t pgd) +static inline int pud_none(pud_t pud) { - return pgd_val(pgd) == (unsigned long) invalid_pmd_table; + return pud_val(pud) == (unsigned long) invalid_pmd_table; } -#define pgd_bad(pgd) (pgd_val(pgd) &~ PAGE_MASK) +static inline int pud_bad(pud_t pud) +{ + return pud_val(pud) & ~PAGE_MASK; +} -static inline int pgd_present(pgd_t pgd) +static inline int pud_present(pud_t pud) { - return pgd_val(pgd) != (unsigned long) invalid_pmd_table; + return pud_val(pud) != (unsigned long) invalid_pmd_table; } -static inline void pgd_clear(pgd_t *pgdp) +static inline void pud_clear(pud_t *pudp) { - pgd_val(*pgdp) = ((unsigned long) invalid_pmd_table); + pud_val(*pudp) = ((unsigned long) invalid_pmd_table); } #define pte_page(x) pfn_to_page((unsigned long)((pte_val(x) >> PAGE_SHIFT))) @@ -162,20 +171,20 @@ static inline void pgd_clear(pgd_t *pgdp) /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(address) pgd_offset(&init_mm, 0) -#define pgd_index(address) ((address) >> PGDIR_SHIFT) +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) /* to find an entry in a page-table-directory */ #define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr)) -static inline unsigned long pgd_page(pgd_t pgd) +static inline unsigned long pud_page(pud_t pud) { - return pgd_val(pgd); + return pud_val(pud); } /* Find an entry in the second-level page table.. */ -static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address) +static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address) { - return (pmd_t *) pgd_page(*dir) + + return (pmd_t *) pud_page(*pud) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD - 1)); } diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index eaf5d9b3a0e1..34d06fe7caac 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -8,8 +8,6 @@ #ifndef _ASM_PGTABLE_H #define _ASM_PGTABLE_H -#include - #include #ifdef CONFIG_32BIT #include @@ -148,11 +146,18 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt #endif /* - * (pmds are folded into pgds so this doesn't get actually called, + * (pmds are folded into puds so this doesn't get actually called, * but the define is needed for a generic inline function.) */ #define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0) -#define set_pgd(pgdptr, pgdval) do { *(pgdptr) = (pgdval); } while(0) + +#ifdef CONFIG_64BIT +/* + * (puds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0) +#endif #define PGD_T_LOG2 ffz(~sizeof(pgd_t)) #define PMD_T_LOG2 ffz(~sizeof(pmd_t)) -- GitLab From 79acf83e509dd0ca3db6c747bf58931984abc6e3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 10 Feb 2005 13:54:37 +0000 Subject: [PATCH 0920/1519] Moves a test which determines if we actually need to perform a cacheflush to the right place. That's a bug which is harmless on UP but a severe bug on SMP. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index b165b73e2583..429167321cfb 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -376,6 +376,13 @@ static inline void local_r4k_flush_cache_page(void *args) pmd_t *pmdp; pte_t *ptep; + /* + * If ownes no valid ASID yet, cannot possibly have gotten + * this page into the cache. + */ + if (cpu_context(smp_processor_id(), vma->vm_mm) == 0) + return; + page &= PAGE_MASK; pgdp = pgd_offset(mm, page); pudp = pud_offset(pgdp, page); @@ -432,13 +439,6 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma, unsigned long page, { struct flush_cache_page_args args; - /* - * If ownes no valid ASID yet, cannot possibly have gotten - * this page into the cache. - */ - if (cpu_context(smp_processor_id(), vma->vm_mm) == 0) - return; - args.vma = vma; args.page = page; -- GitLab From f4b7cdb4814e9ad1ec662bad5fccc4d37bcc6d4c Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Sat, 12 Feb 2005 04:31:49 +0000 Subject: [PATCH 0921/1519] Enable RM7000 secondary cache for Atlas and Malta boards. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 312b6975094f..5701ee3cd387 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -331,6 +331,7 @@ config MIPS_ATLAS select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_GT64120 + select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -347,6 +348,7 @@ config MIPS_MALTA select HW_HAS_PCI select I8259 select MIPS_GT64120 + select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL -- GitLab From 85b6e8184b798d06c854463cdd6c63dd1d4ff47c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 13 Feb 2005 00:32:43 +0000 Subject: [PATCH 0922/1519] Rewrite to avoid the use of $at. Unfortunately binutils 2.15 and CVS binutils are broken and don't warn about this use of $at even though gas is in .set noat mode so this for now is an accident waiting to happen. Signed-off-by: Ralf Baechle --- include/asm-mips/stackframe.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h index 7b5e64600bc8..e33e302c3429 100644 --- a/include/asm-mips/stackframe.h +++ b/include/asm-mips/stackframe.h @@ -78,7 +78,12 @@ MFC0 k1, CP0_CONTEXT dsrl k1, 23 dsll k1, k1, 3 - LONG_L k1, kernelsp(k1) + lui k0, %highest(kernelsp) + daddiu k0, %higher(kernelsp) + dsll k0, k0, 16 + daddiu k0, %hi(kernelsp) + daddu k1, k1, k0 + LONG_L k1, %lo(kernelsp)(k1) #endif .endm -- GitLab From de1db6ffe2d802460b7e9f2c1e354066e000d6e6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 13 Feb 2005 18:53:26 +0000 Subject: [PATCH 0923/1519] It's unwise to disable all interrupts of the boot node ;-) Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip27/ip27-smp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 17f768cba94f..243f2ab45893 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -156,8 +156,11 @@ void __init prom_prepare_cpus(unsigned int max_cpus) { cnodeid_t cnode; - for_each_online_node(cnode) + for_each_online_node(cnode) { + if (cnode == 0) + continue; intr_clear_all(COMPACT_TO_NASID_NODEID(cnode)); + } replicate_kernel_text(); -- GitLab From ca8a597d53e2ef10a005fb38e8de778aa2246035 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 13 Feb 2005 21:31:24 +0000 Subject: [PATCH 0924/1519] If you want RM7000 better fix it to build first ... Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5701ee3cd387..3aeeb1802aaf 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -348,7 +348,6 @@ config MIPS_MALTA select HW_HAS_PCI select I8259 select MIPS_GT64120 - select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL -- GitLab From 39408c6af4457a5dafaa0394932229a8f498a871 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 13 Feb 2005 23:10:08 +0000 Subject: [PATCH 0925/1519] Replace the complicated and broken attempt to clean interrupt by something simple - doesn't need to be fast, after all. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip27/ip27-smp.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 243f2ab45893..3a8291b7d26d 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -127,29 +127,17 @@ void cpu_node_probe(void) printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes()); } -static void intr_clear_bits(nasid_t nasid, volatile hubreg_t *pend, - int base_level) +static __init void intr_clear_all(nasid_t nasid) { - volatile hubreg_t bits; int i; - /* Check pending interrupts */ - if ((bits = HUB_L(pend)) != 0) - for (i = 0; i < N_INTPEND_BITS; i++) - if (bits & (1 << i)) - LOCAL_HUB_CLR_INTR(base_level + i); -} - -static void intr_clear_all(nasid_t nasid) -{ REMOTE_HUB_S(nasid, PI_INT_MASK0_A, 0); REMOTE_HUB_S(nasid, PI_INT_MASK0_B, 0); REMOTE_HUB_S(nasid, PI_INT_MASK1_A, 0); REMOTE_HUB_S(nasid, PI_INT_MASK1_B, 0); - intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND0), - INT_PEND0_BASELVL); - intr_clear_bits(nasid, REMOTE_HUB_ADDR(nasid, PI_INT_PEND1), - INT_PEND1_BASELVL); + + for (i = 0; i < 128; i++) + REMOTE_HUB_CLR_INTR(nasid, i); } void __init prom_prepare_cpus(unsigned int max_cpus) -- GitLab From a4f23e3dfc0931b988f70e38a876bc760400af7b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Feb 2005 20:15:40 +0000 Subject: [PATCH 0926/1519] Allocate break code 513 to KDB. Signed-off-by: Ralf Baechle --- include/asm-mips/break.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-mips/break.h b/include/asm-mips/break.h index 2e6de788f207..25b980c91e7e 100644 --- a/include/asm-mips/break.h +++ b/include/asm-mips/break.h @@ -28,6 +28,7 @@ #define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */ #define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */ #define BRK_BUG 512 /* Used by BUG() */ +#define BRK_KDB 513 /* Used in KDB_ENTER() */ #define BRK_MULOVF 1023 /* Multiply overflow */ #endif /* __ASM_BREAK_H */ -- GitLab From b6e203d84da8298b903a0ebcad1a8170f3959b4f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Feb 2005 21:18:52 +0000 Subject: [PATCH 0927/1519] Use generic compat_sys_wait4 to implement 32-bit wait4(2). Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 73 +--------------------------------- arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- 3 files changed, 3 insertions(+), 74 deletions(-) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index ece4564919d8..dfb448c015e1 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -215,81 +215,10 @@ sys32_readdir(unsigned int fd, void * dirent32, unsigned int count) return(n); } -struct rusage32 { - struct compat_timeval ru_utime; - struct compat_timeval ru_stime; - int ru_maxrss; - int ru_ixrss; - int ru_idrss; - int ru_isrss; - int ru_minflt; - int ru_majflt; - int ru_nswap; - int ru_inblock; - int ru_oublock; - int ru_msgsnd; - int ru_msgrcv; - int ru_nsignals; - int ru_nvcsw; - int ru_nivcsw; -}; - -static int -put_rusage (struct rusage32 *ru, struct rusage *r) -{ - int err; - - if (!access_ok(VERIFY_WRITE, ru, sizeof *ru)) - return -EFAULT; - - err = __put_user (r->ru_utime.tv_sec, &ru->ru_utime.tv_sec); - err |= __put_user (r->ru_utime.tv_usec, &ru->ru_utime.tv_usec); - err |= __put_user (r->ru_stime.tv_sec, &ru->ru_stime.tv_sec); - err |= __put_user (r->ru_stime.tv_usec, &ru->ru_stime.tv_usec); - err |= __put_user (r->ru_maxrss, &ru->ru_maxrss); - err |= __put_user (r->ru_ixrss, &ru->ru_ixrss); - err |= __put_user (r->ru_idrss, &ru->ru_idrss); - err |= __put_user (r->ru_isrss, &ru->ru_isrss); - err |= __put_user (r->ru_minflt, &ru->ru_minflt); - err |= __put_user (r->ru_majflt, &ru->ru_majflt); - err |= __put_user (r->ru_nswap, &ru->ru_nswap); - err |= __put_user (r->ru_inblock, &ru->ru_inblock); - err |= __put_user (r->ru_oublock, &ru->ru_oublock); - err |= __put_user (r->ru_msgsnd, &ru->ru_msgsnd); - err |= __put_user (r->ru_msgrcv, &ru->ru_msgrcv); - err |= __put_user (r->ru_nsignals, &ru->ru_nsignals); - err |= __put_user (r->ru_nvcsw, &ru->ru_nvcsw); - err |= __put_user (r->ru_nivcsw, &ru->ru_nivcsw); - - return err; -} - -asmlinkage int -sys32_wait4(compat_pid_t pid, unsigned int * stat_addr, int options, - struct rusage32 * ru) -{ - if (!ru) - return sys_wait4(pid, stat_addr, options, NULL); - else { - struct rusage r; - int ret; - unsigned int status; - mm_segment_t old_fs = get_fs(); - - set_fs(KERNEL_DS); - ret = sys_wait4(pid, stat_addr ? &status : NULL, options, &r); - set_fs(old_fs); - if (put_rusage (ru, &r)) return -EFAULT; - if (stat_addr && put_user (status, stat_addr)) - return -EFAULT; - return ret; - } -} - asmlinkage int sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options) { - return sys32_wait4(pid, stat_addr, options, NULL); + return compat_sys_wait4(pid, stat_addr, options, NULL); } struct sysinfo32 { diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index e52049c87bc3..3a56056d8125 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -176,7 +176,7 @@ EXPORT(sysn32_call_table) PTR sys_fork PTR sys32_execve PTR sys_exit - PTR sys32_wait4 + PTR compat_sys_wait4 PTR sys_kill /* 6060 */ PTR sys32_newuname PTR sys_semget diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 739f3998d76b..271b2cb14da0 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -316,7 +316,7 @@ sys_call_table: PTR sys_vhangup PTR sys_ni_syscall /* was sys_idle */ PTR sys_ni_syscall /* sys_vm86 */ - PTR sys32_wait4 + PTR compat_sys_wait4 PTR sys_swapoff /* 4115 */ PTR sys32_sysinfo PTR sys32_ipc -- GitLab From a19050f301c55313826a649943d492c65f977479 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Feb 2005 21:19:59 +0000 Subject: [PATCH 0928/1519] Waitid(2) now has 5 arguments. Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall32-o32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 17b5030fb6ea..00e4a5ed1d81 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -618,7 +618,7 @@ einval: li v0, -EINVAL sys sys_mq_notify 2 /* 4275 */ sys sys_mq_getsetattr 3 sys sys_ni_syscall 0 /* sys_vserver */ - sys sys_waitid 4 + sys sys_waitid 5 sys sys_ni_syscall 0 /* available, was setaltroot */ sys sys_add_key 5 sys sys_request_key 4 -- GitLab From 54f2da755b7f0bf022ea204240cba824af4d80ad Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Feb 2005 21:21:29 +0000 Subject: [PATCH 0929/1519] Implement 32-bit compatibility for waitid(2). Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 22 ++++++++++++++++++++++ arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- arch/mips/kernel/signal32.c | 27 +++++++++++++++++++++++++++ 4 files changed, 51 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index dfb448c015e1..120dd897162e 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -221,6 +221,28 @@ sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options) return compat_sys_wait4(pid, stat_addr, options, NULL); } +asmlinkage long +sysn32_waitid(int which, compat_pid_t pid, + siginfo_t __user *uinfo, int options, + struct compat_rusage __user *uru) +{ + struct rusage ru; + long ret; + mm_segment_t old_fs = get_fs(); + + set_fs (KERNEL_DS); + ret = sys_waitid(which, pid, uinfo, options, + uru ? (struct rusage __user *) &ru : NULL); + set_fs (old_fs); + + if (ret < 0 || uinfo->si_signo == 0) + return ret; + + if (uru) + ret = put_compat_rusage(&ru, uru); + return ret; +} + struct sysinfo32 { s32 uptime; u32 loads[3]; diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 3a56056d8125..982248a17393 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -358,7 +358,7 @@ EXPORT(sysn32_call_table) PTR compat_sys_mq_notify PTR compat_sys_mq_getsetattr PTR sys_ni_syscall /* 6240, sys_vserver */ - PTR sys_waitid + PTR sysn32_waitid PTR sys_ni_syscall /* available, was setaltroot */ PTR sys_add_key PTR sys_request_key diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 271b2cb14da0..00e0d2b8fd8e 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -480,7 +480,7 @@ sys_call_table: PTR compat_sys_mq_notify /* 4275 */ PTR compat_sys_mq_getsetattr PTR sys_ni_syscall /* sys_vserver */ - PTR sys_waitid + PTR sys32_waitid PTR sys_ni_syscall /* available, was setaltroot */ PTR sys_add_key /* 4280 */ PTR sys_request_key diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 8ddfbd8d425a..d50daee51fba 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -902,3 +902,30 @@ asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t *uinfo) set_fs (old_fs); return ret; } + +asmlinkage long +sys32_waitid(int which, compat_pid_t pid, + compat_siginfo_t __user *uinfo, int options, + struct compat_rusage __user *uru) +{ + siginfo_t info; + struct rusage ru; + long ret; + mm_segment_t old_fs = get_fs(); + + info.si_signo = 0; + set_fs (KERNEL_DS); + ret = sys_waitid(which, pid, (siginfo_t __user *) &info, options, + uru ? (struct rusage __user *) &ru : NULL); + set_fs (old_fs); + + if (ret < 0 || info.si_signo == 0) + return ret; + + if (uru && (ret = put_compat_rusage(&ru, uru))) + return ret; + + BUG_ON(info.si_code & __SI_MASK); + info.si_code |= __SI_CHLD; + return copy_siginfo_to_user32(uinfo, &info); +} -- GitLab From 09276d905ef7498212ef69d5c324d027dc405896 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Feb 2005 21:22:40 +0000 Subject: [PATCH 0930/1519] 32-bit compatibility for ptrace GETEVENTMSG operation. Signed-off-by: Ralf Baechle --- arch/mips/kernel/ptrace32.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index eee207969c21..a8a72c9a1cca 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include @@ -273,6 +272,11 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) ret = ptrace_detach(child, data); break; + case PTRACE_GETEVENTMSG: + ret = put_user(child->ptrace_message, + (unsigned int __user *) (unsigned long) data); + break; + default: ret = ptrace_request(child, request, addr, data); break; -- GitLab From a982099ca5465dd848d8ae28a83a3e49ac7b612b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Feb 2005 21:24:16 +0000 Subject: [PATCH 0931/1519] Update to match the native siginfo structure and code. Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index d50daee51fba..18c028ba9efa 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -76,8 +76,10 @@ typedef struct compat_siginfo { /* POSIX.1b timers */ struct { - unsigned int _timer1; - unsigned int _timer2; + timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + sigval_t32 _sigval; /* same as below */ + int _sys_private; /* not to be passed to user */ } _timer; /* POSIX.1b signals */ @@ -411,6 +413,11 @@ int copy_siginfo_to_user32(compat_siginfo_t *to, siginfo_t *from) err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE); else { switch (from->si_code >> 16) { + case __SI_TIMER >> 16: + err |= __put_user(from->si_tid, &to->si_tid); + err |= __put_user(from->si_overrun, &to->si_overrun); + err |= __put_user(from->si_int, &to->si_int); + break; case __SI_CHLD >> 16: err |= __put_user(from->si_utime, &to->si_utime); err |= __put_user(from->si_stime, &to->si_stime); -- GitLab From d1abb6a2b8b57fa14ae0f69d4a3cb07ff9cdb8d1 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Feb 2005 21:25:03 +0000 Subject: [PATCH 0932/1519] 32-bit compatibility for various timer-related system calls. Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 50 ++++++++++++++++++++++++++++++++++ arch/mips/kernel/scall64-n32.S | 18 ++++++------ arch/mips/kernel/scall64-o32.S | 2 +- 3 files changed, 60 insertions(+), 10 deletions(-) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 120dd897162e..e8e886dd52d6 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -1418,3 +1418,53 @@ asmlinkage long sys32_socketcall(int call, unsigned int *args32) } return err; } + +struct sigevent32 { + u32 sigev_value; + u32 sigev_signo; + u32 sigev_notify; + u32 payload[(64 / 4) - 3]; +}; + +extern asmlinkage long +sys_timer_create(clockid_t which_clock, + struct sigevent __user *timer_event_spec, + timer_t __user * created_timer_id); + +long +sys32_timer_create(u32 clock, struct sigevent32 __user *se32, timer_t __user *timer_id) +{ + struct sigevent __user *p = NULL; + if (se32) { + struct sigevent se; + p = compat_alloc_user_space(sizeof(struct sigevent)); + memset(&se, 0, sizeof(struct sigevent)); + if (get_user(se.sigev_value.sival_int, &se32->sigev_value) || + __get_user(se.sigev_signo, &se32->sigev_signo) || + __get_user(se.sigev_notify, &se32->sigev_notify) || + __copy_from_user(&se._sigev_un._pad, &se32->payload, + sizeof(se32->payload)) || + copy_to_user(p, &se, sizeof(se))) + return -EFAULT; + } + return sys_timer_create(clock, p, timer_id); +} + +asmlinkage long +sysn32_rt_sigtimedwait(const sigset_t __user *uthese, + siginfo_t __user *uinfo, + const struct compat_timespec __user *uts32, + size_t sigsetsize) +{ + struct timespec __user *uts = NULL; + + if (uts32) { + struct timespec ts; + uts = compat_alloc_user_space(sizeof(struct timespec)); + if (get_user(ts.tv_sec, &uts32->tv_sec) || + get_user(ts.tv_nsec, &uts32->tv_nsec) || + copy_to_user (uts, &ts, sizeof (ts))) + return -EFAULT; + } + return sys_rt_sigtimedwait(uthese, uinfo, uts, sigsetsize); +} diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 982248a17393..e797f15bc0f0 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -243,8 +243,8 @@ EXPORT(sysn32_call_table) PTR sys_capget PTR sys_capset PTR sys32_rt_sigpending /* 6125 */ - PTR compat_sys_rt_sigtimedwait - PTR sys32_rt_sigqueueinfo + PTR sysn32_rt_sigtimedwait + PTR sys_rt_sigqueueinfo PTR sys32_rt_sigsuspend PTR sys32_sigaltstack PTR compat_sys_utime /* 6130 */ @@ -337,15 +337,15 @@ EXPORT(sysn32_call_table) PTR compat_sys_statfs64 PTR compat_sys_fstatfs64 PTR sys_sendfile64 - PTR sys_timer_create /* 6220 */ - PTR sys_timer_settime - PTR sys_timer_gettime + PTR sys32_timer_create /* 6220 */ + PTR compat_sys_timer_settime + PTR compat_sys_timer_gettime PTR sys_timer_getoverrun PTR sys_timer_delete - PTR sys_clock_settime /* 6225 */ - PTR sys_clock_gettime - PTR sys_clock_getres - PTR sys_clock_nanosleep + PTR compat_sys_clock_settime /* 6225 */ + PTR compat_sys_clock_gettime + PTR compat_sys_clock_getres + PTR compat_sys_clock_nanosleep PTR sys_tgkill PTR compat_sys_utimes /* 6230 */ PTR sys_ni_syscall /* sys_mbind */ diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 00e0d2b8fd8e..1017176bdce9 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -459,7 +459,7 @@ sys_call_table: PTR sys_fadvise64_64 PTR compat_sys_statfs64 /* 4255 */ PTR compat_sys_fstatfs64 - PTR sys_timer_create + PTR sys32_timer_create PTR compat_sys_timer_settime PTR compat_sys_timer_gettime PTR sys_timer_getoverrun /* 4260 */ -- GitLab From d8f5d861789ff23b5d87c081f458aaa7f3c6cdcd Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Fri, 18 Feb 2005 06:27:25 +0000 Subject: [PATCH 0933/1519] Changed all Au1x boards to noncoherent again. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3aeeb1802aaf..2edbef5f3551 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -692,7 +692,7 @@ config MIPS_PB1100 config MIPS_PB1500 bool "PB1500 board" depends on SOC_AU1500 - select DMA_COHERENT + select DMA_NONCOHERENT select HW_HAS_PCI config MIPS_PB1550 @@ -716,7 +716,7 @@ config MIPS_DB1100 config MIPS_DB1500 bool "DB1500 board" depends on SOC_AU1500 - select DMA_COHERENT + select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE @@ -724,7 +724,7 @@ config MIPS_DB1550 bool "DB1550 board" depends on SOC_AU1550 select HW_HAS_PCI - select DMA_COHERENT + select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE config MIPS_BOSPORUS -- GitLab From 1ba582a1285d534928d68c9d67d8fb63da9abbd1 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Sat, 19 Feb 2005 13:27:41 +0000 Subject: [PATCH 0934/1519] O2 doesn't have _that_ much RAM. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-memory.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c index fc76ca92bab9..d37d40a3cdae 100644 --- a/arch/mips/sgi-ip32/ip32-memory.c +++ b/arch/mips/sgi-ip32/ip32-memory.c @@ -36,8 +36,8 @@ void __init prom_meminit (void) if (base + size > (256 << 20)) base += CRIME_HI_MEM_BASE; - printk("CRIME MC: bank %u base 0x%016lx size %luMB\n", - bank, base, size); + printk("CRIME MC: bank %u base 0x%016lx size %luMiB\n", + bank, base, size >> 20); add_memory_region (base, size, BOOT_MEM_RAM); } } -- GitLab From 26a51b270f6d87674b713705ba9533440ca41b6c Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Sat, 19 Feb 2005 13:32:02 +0000 Subject: [PATCH 0935/1519] Use intermediate variable. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 429167321cfb..03100b8a45d9 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -380,7 +380,7 @@ static inline void local_r4k_flush_cache_page(void *args) * If ownes no valid ASID yet, cannot possibly have gotten * this page into the cache. */ - if (cpu_context(smp_processor_id(), vma->vm_mm) == 0) + if (cpu_context(smp_processor_id(), mm) == 0) return; page &= PAGE_MASK; @@ -428,8 +428,8 @@ static inline void local_r4k_flush_cache_page(void *args) if (cpu_has_vtag_icache) { int cpu = smp_processor_id(); - if (cpu_context(cpu, vma->vm_mm) != 0) - drop_mmu_context(vma->vm_mm, cpu); + if (cpu_context(cpu, mm) != 0) + drop_mmu_context(mm, cpu); } else r4k_blast_icache_page_indexed(page); } -- GitLab From 16033d6104f1704bea19ca2684b1c97731479048 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Sat, 19 Feb 2005 13:56:04 +0000 Subject: [PATCH 0936/1519] Handle addresses beyond VMALLOC_END correctly. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/mm/fault.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index 345a4d6ec20f..0eb43151f10a 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -25,6 +25,7 @@ #include #include #include +#include /* For VMALLOC_END */ /* * This routine handles page faults. It determines the address, @@ -57,7 +58,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write, * only copy the information from the master page table, * nothing more. */ - if (unlikely(address >= VMALLOC_START)) + if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END)) goto vmalloc_fault; /* -- GitLab From dd193261482ac235f08836750d22689fd55c5ca0 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Sat, 19 Feb 2005 13:58:37 +0000 Subject: [PATCH 0937/1519] Initialize iomem_resource. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ip32.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c index 000dc6af6cd3..180af89bcb1e 100644 --- a/arch/mips/pci/pci-ip32.c +++ b/arch/mips/pci/pci-ip32.c @@ -136,7 +136,9 @@ static int __init mace_init(void) BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0, "MACE PCI error", NULL)); - ioport_resource.end = mace_pci_io_resource.end; + iomem_resource = mace_pci_mem_resource; + ioport_resource = mace_pci_io_resource; + register_pci_controller(&mace_pci_controller); return 0; -- GitLab From 7ee8798f3756fc473e63abeba56fae3e192ce71f Mon Sep 17 00:00:00 2001 From: "Steven J. Hill" Date: Sat, 19 Feb 2005 16:15:54 +0000 Subject: [PATCH 0938/1519] Until I figure out why NFS filesystems are having problems with the 'load_irix_binary' and having kernel faults, Irix support is disabled. I suspect locking of some sort, but I will now have to investigate further. Static IRIX binaries are now being detected properly and are using the ELF interpreter found in this file. Signed-off-by: Steven J. Hill Signed-off-by: Ralf Baechle --- arch/mips/kernel/irixelf.c | 226 ++++++++++++++++++++----------------- include/asm-mips/elf.h | 3 - 2 files changed, 123 insertions(+), 106 deletions(-) diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c index 4af20cd91f9f..881f125eecb4 100644 --- a/arch/mips/kernel/irixelf.c +++ b/arch/mips/kernel/irixelf.c @@ -8,7 +8,7 @@ * * Copyright (C) 1993 - 1994 Eric Youngdale * Copyright (C) 1996 - 2004 David S. Miller - * Copyright (C) 2004 Steven J. Hill + * Copyright (C) 2004 - 2005 Steven J. Hill */ #include #include @@ -31,15 +31,16 @@ #include #include -#include #include +#include #include +#include #define DLINFO_ITEMS 12 #include -#undef DEBUG_ELF +#undef DEBUG static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs); static int load_irix_library(struct file *); @@ -55,7 +56,7 @@ static struct linux_binfmt irix_format = { #define elf_addr_t unsigned long #endif -#ifdef DEBUG_ELF +#ifdef DEBUG /* Debugging routines. */ static char *get_elf_p_type(Elf32_Word p_type) { @@ -120,7 +121,7 @@ static void dump_phdrs(struct elf_phdr *ep, int pnum) print_phdr(i, ep); } } -#endif /* (DEBUG_ELF) */ +#endif /* DEBUG */ static void set_brk(unsigned long start, unsigned long end) { @@ -150,16 +151,16 @@ static void padzero(unsigned long elf_bss) } } -unsigned long * create_irix_tables(char * p, int argc, int envc, - struct elfhdr * exec, unsigned int load_addr, - unsigned int interp_load_addr, - struct pt_regs *regs, struct elf_phdr *ephdr) +static unsigned long * create_irix_tables(char * p, int argc, int envc, + struct elfhdr * exec, unsigned int load_addr, + unsigned int interp_load_addr, struct pt_regs *regs, + struct elf_phdr *ephdr) { elf_addr_t *argv; elf_addr_t *envp; elf_addr_t *sp, *csp; -#ifdef DEBUG_ELF +#ifdef DEBUG printk("create_irix_tables: p[%p] argc[%d] envc[%d] " "load_addr[%08x] interp_load_addr[%08x]\n", p, argc, envc, load_addr, interp_load_addr); @@ -248,14 +249,13 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, last_bss = 0; error = load_addr = 0; -#ifdef DEBUG_ELF +#ifdef DEBUG print_elfhdr(interp_elf_ex); #endif /* First of all, some simple consistency checks */ if ((interp_elf_ex->e_type != ET_EXEC && interp_elf_ex->e_type != ET_DYN) || - !irix_elf_check_arch(interp_elf_ex) || !interpreter->f_op->mmap) { printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type); return 0xffffffff; @@ -290,7 +290,7 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, (char *) elf_phdata, sizeof(struct elf_phdr) * interp_elf_ex->e_phnum); -#ifdef DEBUG_ELF +#ifdef DEBUG dump_phdrs(elf_phdata, interp_elf_ex->e_phnum); #endif @@ -306,13 +306,11 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, elf_type |= MAP_FIXED; vaddr = eppnt->p_vaddr; -#ifdef DEBUG_ELF - printk("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ", + pr_debug("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ", interpreter, vaddr, (unsigned long) (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)), (unsigned long) elf_prot, (unsigned long) elf_type, (unsigned long) (eppnt->p_offset & 0xfffff000)); -#endif down_write(¤t->mm->mmap_sem); error = do_mmap(interpreter, vaddr, eppnt->p_filesz + (eppnt->p_vaddr & 0xfff), @@ -324,14 +322,10 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, printk("Aieee IRIX interp mmap error=%d\n", error); break; /* Real error */ } -#ifdef DEBUG_ELF - printk("error=%08lx ", (unsigned long) error); -#endif + pr_debug("error=%08lx ", (unsigned long) error); if(!load_addr && interp_elf_ex->e_type == ET_DYN) { load_addr = error; -#ifdef DEBUG_ELF - printk("load_addr = error "); -#endif + pr_debug("load_addr = error "); } /* Find the end of the file mapping for this phdr, and keep @@ -345,17 +339,13 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, */ k = eppnt->p_memsz + eppnt->p_vaddr; if(k > last_bss) last_bss = k; -#ifdef DEBUG_ELF - printk("\n"); -#endif + pr_debug("\n"); } } /* Now use mmap to map the library into memory. */ if(error < 0 && error > -1024) { -#ifdef DEBUG_ELF - printk("got error %d\n", error); -#endif + pr_debug("got error %d\n", error); kfree(elf_phdata); return 0xffffffff; } @@ -365,16 +355,12 @@ static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, * that there are zero-mapped pages up to and including the * last bss page. */ -#ifdef DEBUG_ELF - printk("padzero(%08lx) ", (unsigned long) (elf_bss)); -#endif + pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss)); padzero(elf_bss); len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */ -#ifdef DEBUG_ELF - printk("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss, - (unsigned long) len); -#endif + pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss, + (unsigned long) len); /* Map the last of the bss segment */ if (last_bss > len) { @@ -396,12 +382,7 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm) /* First of all, some simple consistency checks */ if((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) || - !irix_elf_check_arch(ehp) || !bprm->file->f_op->mmap) { - return -ENOEXEC; - } - - /* Only support MIPS ARCH2 or greater IRIX binaries for now. */ - if(!(ehp->e_flags & EF_MIPS_ARCH) && !(ehp->e_flags & 0x04)) { + !bprm->file->f_op->mmap) { return -ENOEXEC; } @@ -411,16 +392,17 @@ static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm) * XXX all registers as 64bits on cpu's capable of this at * XXX exception time plus frob the XTLB exception vector. */ - if((ehp->e_flags & 0x20)) { + if((ehp->e_flags & EF_MIPS_ABI2)) return -ENOEXEC; - } - return 0; /* It's ok. */ + return 0; } -#define IRIX_INTERP_PREFIX "/usr/gnemul/irix" - -/* Look for an IRIX ELF interpreter. */ +/* + * This is where the detailed check is performed. Irix binaries + * use interpreters with 'libc.so' in the name, so this function + * can differentiate between Linux and Irix binaries. + */ static inline int look_for_irix_interpreter(char **name, struct file **interpreter, struct elfhdr *interp_elf_ex, @@ -440,12 +422,13 @@ static inline int look_for_irix_interpreter(char **name, if (*name != NULL) goto out; - *name = kmalloc((epp->p_filesz + strlen(IRIX_INTERP_PREFIX)), - GFP_KERNEL); + *name = (char *) kmalloc((epp->p_filesz + + strlen(IRIX_EMUL)), + GFP_KERNEL); if (!*name) return -ENOMEM; - strcpy(*name, IRIX_INTERP_PREFIX); + strcpy(*name, IRIX_EMUL); retval = kernel_read(bprm->file, epp->p_offset, (*name + 16), epp->p_filesz); if (retval < 0) @@ -562,7 +545,7 @@ static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp, * process and the system, here we map the page and fill the * structure */ -void irix_map_prda_page (void) +static void irix_map_prda_page(void) { unsigned long v; struct prda *pp; @@ -601,14 +584,33 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) load_addr = 0; has_interp = has_ephdr = 0; - elf_ihdr = elf_ephdr = 0; + elf_ihdr = elf_ephdr = NULL; elf_ex = *((struct elfhdr *) bprm->buf); retval = -ENOEXEC; if (verify_binary(&elf_ex, bprm)) goto out; -#ifdef DEBUG_ELF + /* + * Telling -o32 static binaries from Linux and Irix apart from each + * other is difficult. There are 2 differences to be noted for static + * binaries from the 2 operating systems: + * + * 1) Irix binaries have their .text section before their .init + * section. Linux binaries are just the opposite. + * + * 2) Irix binaries usually have <= 12 sections and Linux + * binaries have > 20. + * + * We will use Method #2 since Method #1 would require us to read in + * the section headers which is way too much overhead. This appears + * to work for everything we have ran into so far. If anyone has a + * better method to tell the binaries apart, I'm listening. + */ + if (elf_ex.e_shnum > 20) + goto out; + +#ifdef DEBUG print_elfhdr(&elf_ex); #endif @@ -623,11 +625,10 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) } retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size); - if (retval < 0) goto out_free_ph; -#ifdef DEBUG_ELF +#ifdef DEBUG dump_phdrs(elf_phdata, elf_ex.e_phnum); #endif @@ -644,9 +645,8 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) break; }; } -#ifdef DEBUG_ELF - printk("\n"); -#endif + + pr_debug("\n"); elf_bss = 0; elf_brk = 0; @@ -657,12 +657,19 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) end_code = 0; end_data = 0; - retval = look_for_irix_interpreter(&elf_interpreter, - &interpreter, + /* + * If we get a return value, we change the value to be ENOEXEC + * so that we can exit gracefully and the main binary format + * search loop in 'fs/exec.c' will move onto the next handler + * which should be the normal ELF binary handler. + */ + retval = look_for_irix_interpreter(&elf_interpreter, &interpreter, &interp_elf_ex, elf_phdata, bprm, elf_ex.e_phnum); - if (retval) + if (retval) { + retval = -ENOEXEC; goto out_free_file; + } if (elf_interpreter) { retval = verify_irix_interpreter(&interp_elf_ex); @@ -746,18 +753,16 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) * IRIX maps a page at 0x200000 which holds some system * information. Programs depend on this. */ - irix_map_prda_page (); + irix_map_prda_page(); padzero(elf_bss); -#ifdef DEBUG_ELF - printk("(start_brk) %lx\n" , (long) current->mm->start_brk); - printk("(end_code) %lx\n" , (long) current->mm->end_code); - printk("(start_code) %lx\n" , (long) current->mm->start_code); - printk("(end_data) %lx\n" , (long) current->mm->end_data); - printk("(start_stack) %lx\n" , (long) current->mm->start_stack); - printk("(brk) %lx\n" , (long) current->mm->brk); -#endif + pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk); + pr_debug("(end_code) %lx\n" , (long) current->mm->end_code); + pr_debug("(start_code) %lx\n" , (long) current->mm->start_code); + pr_debug("(end_data) %lx\n" , (long) current->mm->end_data); + pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack); + pr_debug("(brk) %lx\n" , (long) current->mm->brk); #if 0 /* XXX No fucking way dude... */ /* Why this, you ask??? Well SVr4 maps page 0 as read-only, @@ -782,8 +787,7 @@ static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) allow_write_access(interpreter); fput(interpreter); out_free_interp: - if (elf_interpreter) - kfree(elf_interpreter); + kfree(elf_interpreter); out_free_file: out_free_ph: kfree (elf_phdata); @@ -813,7 +817,7 @@ static int load_irix_library(struct file *file) /* First of all, some simple consistency checks. */ if(elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 || - !irix_elf_check_arch(&elf_ex) || !file->f_op->mmap) + !file->f_op->mmap) return -ENOEXEC; /* Now read in all of the header information. */ @@ -876,33 +880,34 @@ static int load_irix_library(struct file *file) */ unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt) { + unsigned long type, vaddr, filesz, offset, flags; struct elf_phdr *hp; struct file *filp; int i, retval; -#ifdef DEBUG_ELF - printk("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n", - fd, user_phdrp, cnt); -#endif + pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n", + fd, user_phdrp, cnt); /* First get the verification out of the way. */ hp = user_phdrp; if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) { -#ifdef DEBUG_ELF - printk("irix_mapelf: access_ok fails!\n"); -#endif + pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n"); + return -EFAULT; } -#ifdef DEBUG_ELF +#ifdef DEBUG dump_phdrs(user_phdrp, cnt); #endif - for(i = 0; i < cnt; i++, hp++) - if(hp->p_type != PT_LOAD) { + for (i = 0; i < cnt; i++, hp++) { + if (__get_user(type, &hp->p_type)) + return -EFAULT; + if (type != PT_LOAD) { printk("irix_mapelf: One section is not PT_LOAD!\n"); return -ENOEXEC; } + } filp = fget(fd); if (!filp) @@ -917,29 +922,40 @@ unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt) for(i = 0; i < cnt; i++, hp++) { int prot; - prot = (hp->p_flags & PF_R) ? PROT_READ : 0; - prot |= (hp->p_flags & PF_W) ? PROT_WRITE : 0; - prot |= (hp->p_flags & PF_X) ? PROT_EXEC : 0; + retval = __get_user(vaddr, &hp->p_vaddr); + retval |= __get_user(filesz, &hp->p_filesz); + retval |= __get_user(offset, &hp->p_offset); + retval |= __get_user(flags, &hp->p_flags); + if (retval) + return retval; + + prot = (flags & PF_R) ? PROT_READ : 0; + prot |= (flags & PF_W) ? PROT_WRITE : 0; + prot |= (flags & PF_X) ? PROT_EXEC : 0; + down_write(¤t->mm->mmap_sem); - retval = do_mmap(filp, (hp->p_vaddr & 0xfffff000), - (hp->p_filesz + (hp->p_vaddr & 0xfff)), + retval = do_mmap(filp, (vaddr & 0xfffff000), + (filesz + (vaddr & 0xfff)), prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE), - (hp->p_offset & 0xfffff000)); + (offset & 0xfffff000)); up_write(¤t->mm->mmap_sem); - if(retval != (hp->p_vaddr & 0xfffff000)) { + if (retval != (vaddr & 0xfffff000)) { printk("irix_mapelf: do_mmap fails with %d!\n", retval); fput(filp); return retval; } } -#ifdef DEBUG_ELF - printk("irix_mapelf: Success, returning %08lx\n", - (unsigned long) user_phdrp->p_vaddr); -#endif + pr_debug("irix_mapelf: Success, returning %08lx\n", + (unsigned long) user_phdrp->p_vaddr); + fput(filp); - return user_phdrp->p_vaddr; + + if (__get_user(vaddr, &user_phdrp->p_vaddr)) + return -EFAULT; + + return vaddr; } /* @@ -954,7 +970,7 @@ unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt) */ static int dump_write(struct file *file, const void *addr, int nr) { - return file->f_op->write(file, addr, nr, &file->f_pos) == nr; + return file->f_op->write(file, (const char *) addr, nr, &file->f_pos) == nr; } static int dump_seek(struct file *file, off_t off) @@ -1073,7 +1089,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) /* Count what's needed to dump, up to the limit of coredump size. */ segs = 0; size = 0; - for(vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) { + for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) { if (maydump(vma)) { int sz = vma->vm_end-vma->vm_start; @@ -1187,9 +1203,9 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) len = current->mm->arg_end - current->mm->arg_start; len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len; - copy_from_user(&psinfo.pr_psargs, + (void *) copy_from_user(&psinfo.pr_psargs, (const char *)current->mm->arg_start, len); - for(i = 0; i < len; i++) + for (i = 0; i < len; i++) if (psinfo.pr_psargs[i] == 0) psinfo.pr_psargs[i] = ' '; psinfo.pr_psargs[len] = 0; @@ -1256,8 +1272,10 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) phdr.p_memsz = sz; offset += phdr.p_filesz; phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0; - if (vma->vm_flags & VM_WRITE) phdr.p_flags |= PF_W; - if (vma->vm_flags & VM_EXEC) phdr.p_flags |= PF_X; + if (vma->vm_flags & VM_WRITE) + phdr.p_flags |= PF_W; + if (vma->vm_flags & VM_EXEC) + phdr.p_flags |= PF_X; phdr.p_align = PAGE_SIZE; DUMP_WRITE(&phdr, sizeof(phdr)); @@ -1299,7 +1317,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) static int __init init_irix_binfmt(void) { - int init_inventory(void); + extern int init_inventory(void); extern asmlinkage unsigned long sys_call_table; extern asmlinkage unsigned long sys_call_table_irix5; @@ -1318,7 +1336,9 @@ static int __init init_irix_binfmt(void) static void __exit exit_irix_binfmt(void) { - /* Remove the IRIX ELF loaders. */ + /* + * Remove the Irix ELF loader. + */ unregister_binfmt(&irix_format); } diff --git a/include/asm-mips/elf.h b/include/asm-mips/elf.h index e48811440015..a743da55e110 100644 --- a/include/asm-mips/elf.h +++ b/include/asm-mips/elf.h @@ -234,9 +234,6 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); #endif /* __KERNEL__ */ -/* This one accepts IRIX binaries. */ -#define irix_elf_check_arch(hdr) ((hdr)->e_flags & RHF_SGI_ONLY) - #define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE PAGE_SIZE -- GitLab From 4e6a05fe5f87efd58da16fbf61e1f6329575fcfd Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Mon, 21 Feb 2005 10:45:09 +0000 Subject: [PATCH 0939/1519] Improved modules loader, more robust and works on 64bit kernels. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/kernel/Makefile | 6 +- arch/mips/kernel/module-elf32.c | 250 ------------------------ arch/mips/kernel/module-elf64.c | 274 -------------------------- arch/mips/kernel/module.c | 336 ++++++++++++++++++++++++++++++++ include/asm-mips/module.h | 40 +++- 5 files changed, 368 insertions(+), 538 deletions(-) delete mode 100644 arch/mips/kernel/module-elf32.c delete mode 100644 arch/mips/kernel/module-elf64.c diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index d3303584fbd1..d54964d52c83 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -11,11 +11,7 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ irix5sys.o sysirix.o -ifdef CONFIG_MODULES -obj-y += mips_ksyms.o module.o -obj-$(CONFIG_32BIT) += module-elf32.o -obj-$(CONFIG_64BIT) += module-elf64.o -endif +obj-$(CONFIG_MODULES) += mips_ksyms.o module.o obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o diff --git a/arch/mips/kernel/module-elf32.c b/arch/mips/kernel/module-elf32.c deleted file mode 100644 index ffd216d6d6dc..000000000000 --- a/arch/mips/kernel/module-elf32.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (C) 2001 Rusty Russell. - * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include - -struct mips_hi16 { - struct mips_hi16 *next; - Elf32_Addr *addr; - Elf32_Addr value; -}; - -static struct mips_hi16 *mips_hi16_list; - -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - return vmalloc(size); -} - - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - -int module_frob_arch_sections(Elf_Ehdr *hdr, - Elf_Shdr *sechdrs, - char *secstrings, - struct module *mod) -{ - return 0; -} - -static int apply_r_mips_none(struct module *me, uint32_t *location, - Elf32_Addr v) -{ - return 0; -} - -static int apply_r_mips_32(struct module *me, uint32_t *location, - Elf32_Addr v) -{ - *location += v; - - return 0; -} - -static int apply_r_mips_26(struct module *me, uint32_t *location, - Elf32_Addr v) -{ - if (v % 4) { - printk(KERN_ERR "module %s: dangerous relocation\n", me->name); - return -ENOEXEC; - } - - if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { - printk(KERN_ERR - "module %s: relocation overflow\n", - me->name); - return -ENOEXEC; - } - - *location = (*location & ~0x03ffffff) | - ((*location + (v >> 2)) & 0x03ffffff); - - return 0; -} - -static int apply_r_mips_hi16(struct module *me, uint32_t *location, - Elf32_Addr v) -{ - struct mips_hi16 *n; - - /* - * We cannot relocate this one now because we don't know the value of - * the carry we need to add. Save the information, and let LO16 do the - * actual relocation. - */ - n = kmalloc(sizeof *n, GFP_KERNEL); - if (!n) - return -ENOMEM; - - n->addr = location; - n->value = v; - n->next = mips_hi16_list; - mips_hi16_list = n; - - return 0; -} - -static int apply_r_mips_lo16(struct module *me, uint32_t *location, - Elf32_Addr v) -{ - unsigned long insnlo = *location; - Elf32_Addr val, vallo; - - /* Sign extend the addend we extract from the lo insn. */ - vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; - - if (mips_hi16_list != NULL) { - struct mips_hi16 *l; - - l = mips_hi16_list; - while (l != NULL) { - struct mips_hi16 *next; - unsigned long insn; - - /* - * The value for the HI16 had best be the same. - */ - if (v != l->value) - goto out_danger; - - /* - * Do the HI16 relocation. Note that we actually don't - * need to know anything about the LO16 itself, except - * where to find the low 16 bits of the addend needed - * by the LO16. - */ - insn = *l->addr; - val = ((insn & 0xffff) << 16) + vallo; - val += v; - - /* - * Account for the sign extension that will happen in - * the low bits. - */ - val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff; - - insn = (insn & ~0xffff) | val; - *l->addr = insn; - - next = l->next; - kfree(l); - l = next; - } - - mips_hi16_list = NULL; - } - - /* - * Ok, we're done with the HI16 relocs. Now deal with the LO16. - */ - val = v + vallo; - insnlo = (insnlo & ~0xffff) | (val & 0xffff); - *location = insnlo; - - return 0; - -out_danger: - printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name); - - return -ENOEXEC; -} - -static int (*reloc_handlers[]) (struct module *me, uint32_t *location, - Elf32_Addr v) = { - [R_MIPS_NONE] = apply_r_mips_none, - [R_MIPS_32] = apply_r_mips_32, - [R_MIPS_26] = apply_r_mips_26, - [R_MIPS_HI16] = apply_r_mips_hi16, - [R_MIPS_LO16] = apply_r_mips_lo16 -}; - -int apply_relocate(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - unsigned int i; - Elf32_Addr v; - int res; - - pr_debug("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - Elf32_Word r_info = rel[i].r_info; - - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - /* This is the symbol it is referring to */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(r_info); - if (!sym->st_value) { - printk(KERN_WARNING "%s: Unknown symbol %s\n", - me->name, strtab + sym->st_name); - return -ENOENT; - } - - v = sym->st_value; - - res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v); - if (res) - return res; - } - - return 0; -} - -int apply_relocate_add(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - /* - * Current binutils always generate .rela relocations. Keep smiling - * if it's empty, abort otherwise. - */ - if (!sechdrs[relsec].sh_size) - return 0; - - printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n", - me->name); - return -ENOEXEC; -} diff --git a/arch/mips/kernel/module-elf64.c b/arch/mips/kernel/module-elf64.c deleted file mode 100644 index e804792ee1ee..000000000000 --- a/arch/mips/kernel/module-elf64.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (C) 2001 Rusty Russell. - * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include - -struct mips_hi16 { - struct mips_hi16 *next; - Elf32_Addr *addr; - Elf64_Addr value; -}; - -static struct mips_hi16 *mips_hi16_list; - -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - return vmalloc(size); -} - - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - -int module_frob_arch_sections(Elf_Ehdr *hdr, - Elf_Shdr *sechdrs, - char *secstrings, - struct module *mod) -{ - return 0; -} - -int apply_relocate(Elf64_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - /* - * We don't want to deal with REL relocations - RELA is so much saner. - */ - if (!sechdrs[relsec].sh_size) - return 0; - - printk(KERN_ERR "module %s: REL relocation unsupported\n", - me->name); - return -ENOEXEC; -} - -static int apply_r_mips_none(struct module *me, uint32_t *location, - Elf64_Addr v) -{ - return 0; -} - -static int apply_r_mips_32(struct module *me, uint32_t *location, - Elf64_Addr v) -{ - *location = v; - - return 0; -} - -static int apply_r_mips_26(struct module *me, uint32_t *location, - Elf64_Addr v) -{ - if (v % 4) { - printk(KERN_ERR "module %s: dangerous relocation\n", me->name); - return -ENOEXEC; - } - - if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { - printk(KERN_ERR - "module %s: relocation overflow\n", - me->name); - return -ENOEXEC; - } - - *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff); - - return 0; -} - -static int apply_r_mips_hi16(struct module *me, uint32_t *location, - Elf64_Addr v) -{ - struct mips_hi16 *n; - - /* - * We cannot relocate this one now because we don't know the value of - * the carry we need to add. Save the information, and let LO16 do the - * actual relocation. - */ - n = kmalloc(sizeof *n, GFP_KERNEL); - if (!n) - return -ENOMEM; - - n->addr = location; - n->value = v; - n->next = mips_hi16_list; - mips_hi16_list = n; - - return 0; -} - -static int apply_r_mips_lo16(struct module *me, uint32_t *location, - Elf64_Addr v) -{ - unsigned long insnlo = *location; - Elf32_Addr val, vallo; - - /* Sign extend the addend we extract from the lo insn. */ - vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; - - if (mips_hi16_list != NULL) { - struct mips_hi16 *l; - - l = mips_hi16_list; - while (l != NULL) { - struct mips_hi16 *next; - unsigned long insn; - - /* - * The value for the HI16 had best be the same. - */ - if (v != l->value) - goto out_danger; - - /* - * Do the HI16 relocation. Note that we actually don't - * need to know anything about the LO16 itself, except - * where to find the low 16 bits of the addend needed - * by the LO16. - */ - insn = *l->addr; - val = ((insn & 0xffff) << 16) + vallo; - val += v; - - /* - * Account for the sign extension that will happen in - * the low bits. - */ - val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff; - - insn = (insn & ~0xffff) | val; - *l->addr = insn; - - next = l->next; - kfree(l); - l = next; - } - - mips_hi16_list = NULL; - } - - /* - * Ok, we're done with the HI16 relocs. Now deal with the LO16. - */ - insnlo = (insnlo & ~0xffff) | (v & 0xffff); - *location = insnlo; - - return 0; - -out_danger: - printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name); - - return -ENOEXEC; -} - -static int apply_r_mips_64(struct module *me, uint32_t *location, - Elf64_Addr v) -{ - *(uint64_t *) location = v; - - return 0; -} - - -static int apply_r_mips_higher(struct module *me, uint32_t *location, - Elf64_Addr v) -{ - *location = (*location & 0xffff0000) | - ((((long long) v + 0x80008000LL) >> 32) & 0xffff); - - return 0; -} - -static int apply_r_mips_highest(struct module *me, uint32_t *location, - Elf64_Addr v) -{ - *location = (*location & 0xffff0000) | - ((((long long) v + 0x800080008000LL) >> 48) & 0xffff); - - return 0; -} - -static int (*reloc_handlers[]) (struct module *me, uint32_t *location, - Elf64_Addr v) = { - [R_MIPS_NONE] = apply_r_mips_none, - [R_MIPS_32] = apply_r_mips_32, - [R_MIPS_26] = apply_r_mips_26, - [R_MIPS_HI16] = apply_r_mips_hi16, - [R_MIPS_LO16] = apply_r_mips_lo16, - [R_MIPS_64] = apply_r_mips_64, - [R_MIPS_HIGHER] = apply_r_mips_higher, - [R_MIPS_HIGHEST] = apply_r_mips_highest -}; - -int apply_relocate_add(Elf64_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - Elf64_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr; - Elf64_Sym *sym; - uint32_t *location; - unsigned int i; - Elf64_Addr v; - int res; - - pr_debug("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - /* This is the symbol it is referring to */ - sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + rel[i].r_sym; - if (!sym->st_value) { - printk(KERN_WARNING "%s: Unknown symbol %s\n", - me->name, strtab + sym->st_name); - return -ENOENT; - } - - v = sym->st_value; - - res = reloc_handlers[rel[i].r_type](me, location, v); - if (res) - return res; - } - - return 0; -} diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index 458af3c7a639..e54a7f442f8a 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -1,9 +1,345 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (C) 2001 Rusty Russell. + * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2005 Thiemo Seufer + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include #include #include +struct mips_hi16 { + struct mips_hi16 *next; + Elf_Addr *addr; + Elf_Addr value; +}; + +static struct mips_hi16 *mips_hi16_list; + static LIST_HEAD(dbe_list); static DEFINE_SPINLOCK(dbe_lock); +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc(size); +} + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, + char *secstrings, struct module *mod) +{ + return 0; +} + +static int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v) +{ + return 0; +} + +static int apply_r_mips_32_rel(struct module *me, u32 *location, Elf_Addr v) +{ + *location += v; + + return 0; +} + +static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v) +{ + *location = v; + + return 0; +} + +static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v) +{ + if (v % 4) { + printk(KERN_ERR "module %s: dangerous relocation\n", me->name); + return -ENOEXEC; + } + + if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + printk(KERN_ERR + "module %s: relocation overflow\n", + me->name); + return -ENOEXEC; + } + + *location = (*location & ~0x03ffffff) | + ((*location + (v >> 2)) & 0x03ffffff); + + return 0; +} + +static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v) +{ + if (v % 4) { + printk(KERN_ERR "module %s: dangerous relocation\n", me->name); + return -ENOEXEC; + } + + if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + printk(KERN_ERR + "module %s: relocation overflow\n", + me->name); + return -ENOEXEC; + } + + *location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff); + + return 0; +} + +static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v) +{ + struct mips_hi16 *n; + + /* + * We cannot relocate this one now because we don't know the value of + * the carry we need to add. Save the information, and let LO16 do the + * actual relocation. + */ + n = kmalloc(sizeof *n, GFP_KERNEL); + if (!n) + return -ENOMEM; + + n->addr = (Elf_Addr *)location; + n->value = v; + n->next = mips_hi16_list; + mips_hi16_list = n; + + return 0; +} + +static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v) +{ + *location = (*location & 0xffff0000) | + ((((long long) v + 0x8000LL) >> 16) & 0xffff); + + return 0; +} + +static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) +{ + unsigned long insnlo = *location; + Elf_Addr val, vallo; + + /* Sign extend the addend we extract from the lo insn. */ + vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; + + if (mips_hi16_list != NULL) { + struct mips_hi16 *l; + + l = mips_hi16_list; + while (l != NULL) { + struct mips_hi16 *next; + unsigned long insn; + + /* + * The value for the HI16 had best be the same. + */ + if (v != l->value) + goto out_danger; + + /* + * Do the HI16 relocation. Note that we actually don't + * need to know anything about the LO16 itself, except + * where to find the low 16 bits of the addend needed + * by the LO16. + */ + insn = *l->addr; + val = ((insn & 0xffff) << 16) + vallo; + val += v; + + /* + * Account for the sign extension that will happen in + * the low bits. + */ + val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff; + + insn = (insn & ~0xffff) | val; + *l->addr = insn; + + next = l->next; + kfree(l); + l = next; + } + + mips_hi16_list = NULL; + } + + /* + * Ok, we're done with the HI16 relocs. Now deal with the LO16. + */ + val = v + vallo; + insnlo = (insnlo & ~0xffff) | (val & 0xffff); + *location = insnlo; + + return 0; + +out_danger: + printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name); + + return -ENOEXEC; +} + +static int apply_r_mips_lo16_rela(struct module *me, u32 *location, Elf_Addr v) +{ + *location = (*location & 0xffff0000) | (v & 0xffff); + + return 0; +} + +static int apply_r_mips_64_rela(struct module *me, u32 *location, Elf_Addr v) +{ + *(Elf_Addr *)location = v; + + return 0; +} + +static int apply_r_mips_higher_rela(struct module *me, u32 *location, + Elf_Addr v) +{ + *location = (*location & 0xffff0000) | + ((((long long) v + 0x80008000LL) >> 32) & 0xffff); + + return 0; +} + +static int apply_r_mips_highest_rela(struct module *me, u32 *location, + Elf_Addr v) +{ + *location = (*location & 0xffff0000) | + ((((long long) v + 0x800080008000LL) >> 48) & 0xffff); + + return 0; +} + +static int (*reloc_handlers_rel[]) (struct module *me, u32 *location, + Elf_Addr v) = { + [R_MIPS_NONE] = apply_r_mips_none, + [R_MIPS_32] = apply_r_mips_32_rel, + [R_MIPS_26] = apply_r_mips_26_rel, + [R_MIPS_HI16] = apply_r_mips_hi16_rel, + [R_MIPS_LO16] = apply_r_mips_lo16_rel +}; + +static int (*reloc_handlers_rela[]) (struct module *me, u32 *location, + Elf_Addr v) = { + [R_MIPS_NONE] = apply_r_mips_none, + [R_MIPS_32] = apply_r_mips_32_rela, + [R_MIPS_26] = apply_r_mips_26_rela, + [R_MIPS_HI16] = apply_r_mips_hi16_rela, + [R_MIPS_LO16] = apply_r_mips_lo16_rela, + [R_MIPS_64] = apply_r_mips_64_rela, + [R_MIPS_HIGHER] = apply_r_mips_higher_rela, + [R_MIPS_HIGHEST] = apply_r_mips_highest_rela +}; + +int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, + struct module *me) +{ + Elf_Mips_Rel *rel = (void *) sechdrs[relsec].sh_addr; + Elf_Sym *sym; + u32 *location; + unsigned int i; + Elf_Addr v; + int res; + + pr_debug("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to */ + sym = (Elf_Sym *)sechdrs[symindex].sh_addr + + ELF_MIPS_R_SYM(rel[i]); + if (!sym->st_value) { + printk(KERN_WARNING "%s: Unknown symbol %s\n", + me->name, strtab + sym->st_name); + return -ENOENT; + } + + v = sym->st_value; + + res = reloc_handlers_rel[ELF_MIPS_R_TYPE(rel[i])](me, location, v); + if (res) + return res; + } + + return 0; +} + +int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, + struct module *me) +{ + Elf_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr; + Elf_Sym *sym; + u32 *location; + unsigned int i; + Elf_Addr v; + int res; + + pr_debug("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to */ + sym = (Elf_Sym *)sechdrs[symindex].sh_addr + + ELF_MIPS_R_SYM(rel[i]); + if (!sym->st_value) { + printk(KERN_WARNING "%s: Unknown symbol %s\n", + me->name, strtab + sym->st_name); + return -ENOENT; + } + + v = sym->st_value + rel[i].r_addend; + + res = reloc_handlers_rela[ELF_MIPS_R_TYPE(rel[i])](me, location, v); + if (res) + return res; + } + + return 0; +} + /* Given an address, look for it in the module exception tables. */ const struct exception_table_entry *search_module_dbetables(unsigned long addr) { diff --git a/include/asm-mips/module.h b/include/asm-mips/module.h index 0be58b2aeb9f..2a81e02a3035 100644 --- a/include/asm-mips/module.h +++ b/include/asm-mips/module.h @@ -14,15 +14,23 @@ struct mod_arch_specific { typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ -typedef struct -{ - Elf64_Addr r_offset; /* Address of relocation. */ - Elf64_Word r_sym; /* Symbol index. */ - Elf64_Byte r_ssym; /* Special symbol. */ - Elf64_Byte r_type3; /* Third relocation. */ - Elf64_Byte r_type2; /* Second relocation. */ - Elf64_Byte r_type; /* First relocation. */ - Elf64_Sxword r_addend; /* Addend. */ +typedef struct { + Elf64_Addr r_offset; /* Address of relocation. */ + Elf64_Word r_sym; /* Symbol index. */ + Elf64_Byte r_ssym; /* Special symbol. */ + Elf64_Byte r_type3; /* Third relocation. */ + Elf64_Byte r_type2; /* Second relocation. */ + Elf64_Byte r_type; /* First relocation. */ +} Elf64_Mips_Rel; + +typedef struct { + Elf64_Addr r_offset; /* Address of relocation. */ + Elf64_Word r_sym; /* Symbol index. */ + Elf64_Byte r_ssym; /* Special symbol. */ + Elf64_Byte r_type3; /* Third relocation. */ + Elf64_Byte r_type2; /* Second relocation. */ + Elf64_Byte r_type; /* First relocation. */ + Elf64_Sxword r_addend; /* Addend. */ } Elf64_Mips_Rela; #ifdef CONFIG_32BIT @@ -30,6 +38,13 @@ typedef struct #define Elf_Shdr Elf32_Shdr #define Elf_Sym Elf32_Sym #define Elf_Ehdr Elf32_Ehdr +#define Elf_Addr Elf32_Addr + +#define Elf_Mips_Rel Elf32_Rel +#define Elf_Mips_Rela Elf32_Rela + +#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info) +#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info) #endif @@ -38,6 +53,13 @@ typedef struct #define Elf_Shdr Elf64_Shdr #define Elf_Sym Elf64_Sym #define Elf_Ehdr Elf64_Ehdr +#define Elf_Addr Elf64_Addr + +#define Elf_Mips_Rel Elf64_Mips_Rel +#define Elf_Mips_Rela Elf64_Mips_Rela + +#define ELF_MIPS_R_SYM(rel) (rel.r_sym) +#define ELF_MIPS_R_TYPE(rel) (rel.r_type) #endif -- GitLab From dc953df1ba5526814982676f47580c8e1bcdbfeb Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Mon, 21 Feb 2005 10:55:16 +0000 Subject: [PATCH 0940/1519] Fix wchan implementation, based on earlier by from Atsushi Nemoto. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 135 +++++++++++++++++++++---------------- 1 file changed, 77 insertions(+), 58 deletions(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index e4f2f8011387..f99efce556ea 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -211,22 +211,48 @@ long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } -struct mips_frame_info { +static struct mips_frame_info { + void *func; + int omit_fp; /* compiled without fno-omit-frame-pointer */ int frame_offset; int pc_offset; +} schedule_frame, mfinfo[] = { + { schedule, 0 }, /* must be first */ + /* arch/mips/kernel/semaphore.c */ + { __down, 1 }, + { __down_interruptible, 1 }, + /* kernel/sched.c */ +#ifdef CONFIG_PREEMPT + { preempt_schedule, 0 }, +#endif + { wait_for_completion, 0 }, + { interruptible_sleep_on, 0 }, + { interruptible_sleep_on_timeout, 0 }, + { sleep_on, 0 }, + { sleep_on_timeout, 0 }, + { yield, 0 }, + { io_schedule, 0 }, + { io_schedule_timeout, 0 }, +#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT) + { __preempt_spin_lock, 0 }, + { __preempt_write_lock, 0 }, +#endif + /* kernel/timer.c */ + { schedule_timeout, 1 }, +/* { nanosleep_restart, 1 }, */ + /* lib/rwsem-spinlock.c */ + { __down_read, 1 }, + { __down_write, 1 }, }; -static struct mips_frame_info schedule_frame; -static struct mips_frame_info schedule_timeout_frame; -static struct mips_frame_info sleep_on_frame; -static struct mips_frame_info sleep_on_timeout_frame; -static struct mips_frame_info wait_for_completion_frame; + static int mips_frame_info_initialized; -static int __init get_frame_info(struct mips_frame_info *info, void *func) +static int __init get_frame_info(struct mips_frame_info *info) { int i; + void *func = info->func; union mips_instruction *ip = (union mips_instruction *)func; info->pc_offset = -1; - info->frame_offset = -1; + info->frame_offset = info->omit_fp ? 0 : -1; for (i = 0; i < 128; i++, ip++) { /* if jal, jalr, jr, stop. */ if (ip->j_format.opcode == jal_op || @@ -247,14 +273,16 @@ static int __init get_frame_info(struct mips_frame_info *info, void *func) /* sw / sd $ra, offset($sp) */ if (ip->i_format.rt == 31) { if (info->pc_offset != -1) - break; + continue; info->pc_offset = ip->i_format.simmediate / sizeof(long); } /* sw / sd $s8, offset($sp) */ if (ip->i_format.rt == 30) { +//#if 0 /* gcc 3.4 does aggressive optimization... */ if (info->frame_offset != -1) - break; + continue; +//#endif info->frame_offset = ip->i_format.simmediate / sizeof(long); } @@ -272,13 +300,25 @@ static int __init get_frame_info(struct mips_frame_info *info, void *func) static int __init frame_info_init(void) { - mips_frame_info_initialized = - !get_frame_info(&schedule_frame, schedule) && - !get_frame_info(&schedule_timeout_frame, schedule_timeout) && - !get_frame_info(&sleep_on_frame, sleep_on) && - !get_frame_info(&sleep_on_timeout_frame, sleep_on_timeout) && - !get_frame_info(&wait_for_completion_frame, wait_for_completion); - + int i, found; + for (i = 0; i < ARRAY_SIZE(mfinfo); i++) + if (get_frame_info(&mfinfo[i])) + return -1; + schedule_frame = mfinfo[0]; + /* bubble sort */ + do { + struct mips_frame_info tmp; + found = 0; + for (i = 1; i < ARRAY_SIZE(mfinfo); i++) { + if (mfinfo[i-1].func > mfinfo[i].func) { + tmp = mfinfo[i]; + mfinfo[i] = mfinfo[i-1]; + mfinfo[i-1] = tmp; + found = 1; + } + } + } while (found); + mips_frame_info_initialized = 1; return 0; } @@ -303,60 +343,39 @@ unsigned long thread_saved_pc(struct task_struct *tsk) /* get_wchan - a maintenance nightmare^W^Wpain in the ass ... */ unsigned long get_wchan(struct task_struct *p) { + unsigned long stack_page; unsigned long frame, pc; if (!p || p == current || p->state == TASK_RUNNING) return 0; - if (!mips_frame_info_initialized) + stack_page = (unsigned long)p->thread_info; + if (!stack_page || !mips_frame_info_initialized) return 0; + pc = thread_saved_pc(p); if (!in_sched_functions(pc)) - goto out; - - if (pc >= (unsigned long) sleep_on_timeout) - goto schedule_timeout_caller; - if (pc >= (unsigned long) sleep_on) - goto schedule_caller; - if (pc >= (unsigned long) interruptible_sleep_on_timeout) - goto schedule_timeout_caller; - if (pc >= (unsigned long)interruptible_sleep_on) - goto schedule_caller; - if (pc >= (unsigned long)wait_for_completion) - goto schedule_caller; - goto schedule_timeout_caller; - -schedule_caller: - frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset]; - if (pc >= (unsigned long) sleep_on) - pc = ((unsigned long *)frame)[sleep_on_frame.pc_offset]; - else - pc = ((unsigned long *)frame)[wait_for_completion_frame.pc_offset]; - goto out; + return pc; -schedule_timeout_caller: - /* - * The schedule_timeout frame - */ frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset]; + do { + int i; - /* - * frame now points to sleep_on_timeout's frame - */ - pc = ((unsigned long *)frame)[schedule_timeout_frame.pc_offset]; + if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32) + return 0; - if (in_sched_functions(pc)) { - /* schedule_timeout called by [interruptible_]sleep_on_timeout */ - frame = ((unsigned long *)frame)[schedule_timeout_frame.frame_offset]; - pc = ((unsigned long *)frame)[sleep_on_timeout_frame.pc_offset]; - } - -out: + for (i = ARRAY_SIZE(mfinfo) - 1; i >= 0; i--) { + if (pc >= (unsigned long) mfinfo[i].func) + break; + } + if (i < 0) + break; -#ifdef CONFIG_64BIT - if (current->thread.mflags & MF_32BIT_REGS) /* Kludge for 32-bit ps */ - pc &= 0xffffffffUL; -#endif + if (mfinfo[i].omit_fp) + break; + pc = ((unsigned long *)frame)[mfinfo[i].pc_offset]; + frame = ((unsigned long *)frame)[mfinfo[i].frame_offset]; + } while (in_sched_functions(pc)); return pc; } -- GitLab From f29244a59460a62f20885e1e3b55a845fb5a8fdb Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Mon, 21 Feb 2005 11:11:32 +0000 Subject: [PATCH 0941/1519] Fix compilation, and bring 32/64 bit variants more in line. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- include/asm-mips/pgtable-32.h | 9 +++------ include/asm-mips/pgtable-64.h | 9 +++++---- 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h index 8d66303eabc4..9b4d39d9f2f0 100644 --- a/include/asm-mips/pgtable-32.h +++ b/include/asm-mips/pgtable-32.h @@ -43,10 +43,6 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, * works even with the cache aliasing problem the R4k and above have. */ -/* PMD_SHIFT determines the size of the area a second-level page table can map */ -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - /* PGDIR_SHIFT determines what a third-level page table entry can map */ #ifdef CONFIG_64BIT_PHYS_ADDR #define PGDIR_SHIFT 21 @@ -78,7 +74,7 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, #define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 -#define VMALLOC_START KSEG2 +#define VMALLOC_START MAP_BASE #ifdef CONFIG_HIGHMEM # define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE) @@ -146,12 +142,13 @@ pfn_pte(unsigned long pfn, pgprot_t prot) #endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ #define __pgd_offset(address) pgd_index(address) +#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) #define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(address) pgd_offset(&init_mm, address) -#define pgd_index(address) ((address) >> PGDIR_SHIFT) +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) /* to find an entry in a page-table-directory */ #define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr)) diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h index ac5517fa1ee4..35007250ac2b 100644 --- a/include/asm-mips/pgtable-64.h +++ b/include/asm-mips/pgtable-64.h @@ -59,7 +59,7 @@ * two levels would be easy to implement. * * For 16kB page size we use a 2 level page tree which permits a total of - * 36 bits of virtual address space. We could add a third leve. but it seems + * 36 bits of virtual address space. We could add a third level but it seems * like at the moment there's no need for this. * * For 64kB page size we use a 2 level page table tree for a total of 42 bits @@ -97,7 +97,7 @@ #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 -#define VMALLOC_START XKSEG +#define VMALLOC_START MAP_BASE #define VMALLOC_END \ (VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE) @@ -134,7 +134,7 @@ static inline void pmd_clear(pmd_t *pmdp) } /* - * Empty pgd entries point to the invalid_pmd_table. + * Empty pud entries point to the invalid_pmd_table. */ static inline int pud_none(pud_t pud) { @@ -166,12 +166,13 @@ static inline void pud_clear(pud_t *pudp) #endif #define __pgd_offset(address) pgd_index(address) +#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) #define page_pte(page) page_pte_prot(page, __pgprot(0)) /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(address) pgd_offset(&init_mm, 0) -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) /* to find an entry in a page-table-directory */ #define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr)) -- GitLab From 9f83d839dfd2dbe421224c29f02cef77f5b4b875 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Mon, 21 Feb 2005 11:22:15 +0000 Subject: [PATCH 0942/1519] -nostdlib boilerplate. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 346e803f153b..dbd79bef34a0 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -79,7 +79,7 @@ endif cflags-y += -I $(TOPDIR)/include/asm/gcc cflags-y += -G 0 -mno-abicalls -fno-pic -pipe cflags-y += $(call cc-option, -finline-limit=100000) -LDFLAGS_vmlinux += -G 0 -static -n +LDFLAGS_vmlinux += -G 0 -static -n -nostdlib MODFLAGS += -mlong-calls cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer -- GitLab From 049b13c358f0187cf3c5003d5fb9848dbcb28bc3 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Mon, 21 Feb 2005 11:44:31 +0000 Subject: [PATCH 0943/1519] Enable/disable irq's only if needed. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- include/asm-mips/io.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 039845f2e6b0..1f2fe11f4124 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -319,7 +319,8 @@ static inline type pfx##read##bwlq(volatile void __iomem *mem) \ else if (cpu_has_64bits) { \ unsigned long __flags; \ \ - local_irq_save(__flags); \ + if (irq) \ + local_irq_save(__flags); \ __asm__ __volatile__( \ ".set mips3" "\t\t# __readq" "\n\t" \ "ld %L0, %1" "\n\t" \ @@ -328,7 +329,8 @@ static inline type pfx##read##bwlq(volatile void __iomem *mem) \ ".set mips0" "\n" \ : "=r" (__val) \ : "m" (*__mem)); \ - local_irq_restore(__flags); \ + if (irq) \ + local_irq_restore(__flags); \ } else { \ __val = 0; \ BUG(); \ -- GitLab From c4ed38a0c6e2e5c4906296758f816ee71373792f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 21 Feb 2005 16:18:36 +0000 Subject: [PATCH 0944/1519] Resurrect Cobalt support for 2.6. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 1 + arch/mips/cobalt/Makefile | 2 +- arch/mips/cobalt/int-handler.S | 4 +- arch/mips/cobalt/irq.c | 111 ++++++++++++++++--------- arch/mips/cobalt/promcon.c | 87 ------------------- arch/mips/cobalt/reset.c | 59 +++++++------ arch/mips/cobalt/setup.c | 100 +++++++++++++++------- arch/mips/pci/fixup-cobalt.c | 55 +++++++++++- arch/mips/pci/ops-gt64111.c | 10 +-- drivers/char/lcd.c | 4 +- drivers/char/lcd.h | 2 +- include/asm-mips/cobalt/cobalt.h | 52 +++++++++--- include/asm-mips/cobalt/mach-gt64120.h | 1 + include/asm-mips/serial.h | 11 --- 14 files changed, 276 insertions(+), 223 deletions(-) delete mode 100644 arch/mips/cobalt/promcon.c create mode 100644 include/asm-mips/cobalt/mach-gt64120.h diff --git a/arch/mips/Makefile b/arch/mips/Makefile index dbd79bef34a0..5f2dfcddb9f2 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -323,6 +323,7 @@ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # Cobalt Server # core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ +cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/cobalt load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 # diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index a5e6554b2326..3b6b7579d1de 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -2,6 +2,6 @@ # Makefile for the Cobalt micro systems family specific parts of the kernel # -obj-y := irq.o int-handler.o reset.o setup.o promcon.o +obj-y := irq.o int-handler.o reset.o setup.o EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S index 1a21dec1b3ca..f92608e8d84f 100644 --- a/arch/mips/cobalt/int-handler.S +++ b/arch/mips/cobalt/int-handler.S @@ -18,8 +18,8 @@ SAVE_ALL CLI - la ra, ret_from_irq - move a1, sp + PTR_LA ra, ret_from_irq + move a0, sp j cobalt_irq END(cobalt_handle_int) diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c index 6d2a81581397..0d90851f925e 100644 --- a/arch/mips/cobalt/irq.c +++ b/arch/mips/cobalt/irq.c @@ -10,6 +10,8 @@ #include #include #include +#include +#include #include #include @@ -25,8 +27,8 @@ extern void cobalt_handle_int(void); * the CPU interrupt lines, and ones that come in on the via chip. The CPU * mappings are: * - * 16, - Software interrupt 0 (unused) IE_SW0 - * 17 - Software interrupt 1 (unused) IE_SW0 + * 16 - Software interrupt 0 (unused) IE_SW0 + * 17 - Software interrupt 1 (unused) IE_SW1 * 18 - Galileo chip (timer) IE_IRQ0 * 19 - Tulip 0 + NCR SCSI IE_IRQ1 * 20 - Tulip 1 IE_IRQ2 @@ -42,61 +44,94 @@ extern void cobalt_handle_int(void); * 15 - IDE1 */ -asmlinkage void cobalt_irq(struct pt_regs *regs) +static inline void galileo_irq(struct pt_regs *regs) { - unsigned int pending = read_c0_status() & read_c0_cause(); - - if (pending & CAUSEF_IP2) { /* int 18 */ - unsigned long irq_src = GALILEO_INL(GT_INTRCAUSE_OFS); - - /* Check for timer irq ... */ - if (irq_src & GALILEO_T0EXP) { - /* Clear the int line */ - GALILEO_OUTL(0, GT_INTRCAUSE_OFS); - do_IRQ(COBALT_TIMER_IRQ, regs); - } - return; - } + unsigned int mask, pending, devfn; - if (pending & CAUSEF_IP6) { /* int 22 */ - int irq = i8259_irq(); + mask = GALILEO_INL(GT_INTRMASK_OFS); + pending = GALILEO_INL(GT_INTRCAUSE_OFS) & mask; - if (irq >= 0) - do_IRQ(irq, regs); - return; - } + if (pending & GALILEO_INTR_T0EXP) { - if (pending & CAUSEF_IP3) { /* int 19 */ - do_IRQ(COBALT_ETH0_IRQ, regs); - return; - } + GALILEO_OUTL(~GALILEO_INTR_T0EXP, GT_INTRCAUSE_OFS); + do_IRQ(COBALT_GALILEO_IRQ, regs); - if (pending & CAUSEF_IP4) { /* int 20 */ - do_IRQ(COBALT_ETH1_IRQ, regs); - return; - } + } else if (pending & GALILEO_INTR_RETRY_CTR) { - if (pending & CAUSEF_IP5) { /* int 21 */ - do_IRQ(COBALT_SERIAL_IRQ, regs); - return; - } + devfn = GALILEO_INL(GT_PCI0_CFGADDR_OFS) >> 8; + GALILEO_OUTL(~GALILEO_INTR_RETRY_CTR, GT_INTRCAUSE_OFS); + printk(KERN_WARNING "Galileo: PCI retry count exceeded (%02x.%u)\n", + PCI_SLOT(devfn), PCI_FUNC(devfn)); + + } else { - if (pending & CAUSEF_IP7) { /* int 23 */ - do_IRQ(COBALT_QUBE_SLOT_IRQ, regs); - return; + GALILEO_OUTL(mask & ~pending, GT_INTRMASK_OFS); + printk(KERN_WARNING "Galileo: masking unexpected interrupt %08x\n", pending); } } +static inline void via_pic_irq(struct pt_regs *regs) +{ + int irq; + + irq = i8259_irq(); + if (irq >= 0) + do_IRQ(irq, regs); +} + +asmlinkage void cobalt_irq(struct pt_regs *regs) +{ + unsigned pending; + + pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP2) /* COBALT_GALILEO_IRQ (18) */ + + galileo_irq(regs); + + else if (pending & CAUSEF_IP6) /* COBALT_VIA_IRQ (22) */ + + via_pic_irq(regs); + + else if (pending & CAUSEF_IP3) /* COBALT_ETH0_IRQ (19) */ + + do_IRQ(COBALT_CPU_IRQ + 3, regs); + + else if (pending & CAUSEF_IP4) /* COBALT_ETH1_IRQ (20) */ + + do_IRQ(COBALT_CPU_IRQ + 4, regs); + + else if (pending & CAUSEF_IP5) /* COBALT_SERIAL_IRQ (21) */ + + do_IRQ(COBALT_CPU_IRQ + 5, regs); + + else if (pending & CAUSEF_IP7) /* IRQ 23 */ + + do_IRQ(COBALT_CPU_IRQ + 7, regs); +} + +static struct irqaction irq_via = { + no_action, 0, { { 0, } }, "cascade", NULL, NULL +}; + void __init arch_init_irq(void) { + /* + * Mask all Galileo interrupts. The Galileo + * handler is set in cobalt_timer_setup() + */ + GALILEO_OUTL(0, GT_INTRMASK_OFS); + set_except_vector(0, cobalt_handle_int); init_i8259_irqs(); /* 0 ... 15 */ - mips_cpu_irq_init(16); /* 16 ... 23 */ + mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */ /* * Mask all cpu interrupts * (except IE4, we already masked those at VIA level) */ change_c0_status(ST0_IM, IE_IRQ4); + + setup_irq(COBALT_VIA_IRQ, &irq_via); } diff --git a/arch/mips/cobalt/promcon.c b/arch/mips/cobalt/promcon.c deleted file mode 100644 index f03df761e9f1..000000000000 --- a/arch/mips/cobalt/promcon.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * PROM console for Cobalt Raq2 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997 by Ralf Baechle - * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv) - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -static unsigned long port = 0xc800000; - -static __inline__ void ns16550_cons_put_char(char ch, unsigned long ioaddr) -{ - char lsr; - - do { - lsr = inb(ioaddr + UART_LSR); - } while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE)); - outb(ch, ioaddr + UART_TX); -} - -static __inline__ char ns16550_cons_get_char(unsigned long ioaddr) -{ - while ((inb(ioaddr + UART_LSR) & UART_LSR_DR) == 0) - udelay(1); - return inb(ioaddr + UART_RX); -} - -void ns16550_console_write(struct console *co, const char *s, unsigned count) -{ - char lsr, ier; - unsigned i; - - ier = inb(port + UART_IER); - outb(0x00, port + UART_IER); - for (i=0; i < count; i++, s++) { - - if(*s == '\n') - ns16550_cons_put_char('\r', port); - ns16550_cons_put_char(*s, port); - } - - do { - lsr = inb(port + UART_LSR); - } while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE)); - - outb(ier, port + UART_IER); -} - -char getDebugChar(void) -{ - return ns16550_cons_get_char(port); -} - -void putDebugChar(char kgdb_char) -{ - ns16550_cons_put_char(kgdb_char, port); -} - -static struct console ns16550_console = { - .name = "prom", - .setup = NULL, - .write = ns16550_console_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init ns16550_setup_console(void) -{ - register_console(&ns16550_console); - - return 0; -} - -console_initcall(ns16550_setup_console); diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c index 084c8e59f42c..805a0e88507b 100644 --- a/arch/mips/cobalt/reset.c +++ b/arch/mips/cobalt/reset.c @@ -16,48 +16,45 @@ #include #include #include +#include -void cobalt_machine_restart(char *command) +void cobalt_machine_halt(void) { - *(volatile char *)0xbc000000 = 0x0f; + int state, last, diff; + unsigned long mark; /* - * Ouch, we're still alive ... This time we take the silver bullet ... - * ... and find that we leave the hardware in a state in which the - * kernel in the flush locks up somewhen during of after the PCI - * detection stuff. + * turn off bar on Qube, flash power off LED on RaQ (0.5Hz) + * + * restart if ENTER and SELECT are pressed */ - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - __asm__ __volatile__( - "jr\t%0" - : - : "r" (0xbfc00000)); -} -extern int led_state; -#define kLED 0xBC000000 -#define LEDSet(x) (*(volatile unsigned char *) kLED) = (( unsigned char)x) + last = COBALT_KEY_PORT; -void cobalt_machine_halt(void) -{ - int mark; + for (state = 0;;) { + + state ^= COBALT_LED_POWER_OFF; + COBALT_LED_PORT = state; + + diff = COBALT_KEY_PORT ^ last; + last ^= diff; - /* Blink our cute? little LED (number 3)... */ - while (1) { - led_state = led_state | ( 1 << 3 ); - LEDSet(led_state); - mark = jiffies; - while (jiffies<(mark+HZ)); - led_state = led_state & ~( 1 << 3 ); - LEDSet(led_state); - mark = jiffies; - while (jiffies<(mark+HZ)); + if((diff & (COBALT_KEY_ENTER | COBALT_KEY_SELECT)) && !(~last & (COBALT_KEY_ENTER | COBALT_KEY_SELECT))) + COBALT_LED_PORT = COBALT_LED_RESET; + + for (mark = jiffies; jiffies - mark < HZ;) + ; } } +void cobalt_machine_restart(char *command) +{ + COBALT_LED_PORT = COBALT_LED_RESET; + + /* we should never get here */ + cobalt_machine_halt(); +} + /* * This triggers the luser mode device driver for the power switch ;-) */ diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index f8138c15a535..d358a118fa31 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include @@ -21,6 +23,7 @@ #include #include #include +#include #include @@ -30,45 +33,44 @@ extern void cobalt_machine_power_off(void); int cobalt_board_id; -static char my_cmdline[CL_SIZE] = { - "console=ttyS0,115200 " -#ifdef CONFIG_IP_PNP - "ip=on " -#endif -#ifdef CONFIG_ROOT_NFS - "root=/dev/nfs " -#else - "root=/dev/hda1 " -#endif - }; - const char *get_system_type(void) { + switch (cobalt_board_id) { + case COBALT_BRD_ID_QUBE1: + return "Cobalt Qube"; + case COBALT_BRD_ID_RAQ1: + return "Cobalt RaQ"; + case COBALT_BRD_ID_QUBE2: + return "Cobalt Qube2"; + case COBALT_BRD_ID_RAQ2: + return "Cobalt RaQ2"; + } return "MIPS Cobalt"; } static void __init cobalt_timer_setup(struct irqaction *irq) { - /* Load timer value for 150 Hz */ - GALILEO_OUTL(500000, GT_TC0_OFS); + /* Load timer value for 1KHz (TCLK is 50MHz) */ + GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS); - /* Register our timer interrupt */ - setup_irq(COBALT_TIMER_IRQ, irq); + /* Enable timer */ + GALILEO_OUTL(GALILEO_ENTC0 | GALILEO_SELTC0, GT_TC_CONTROL_OFS); - /* Enable timer ints */ - GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS); - /* Unmask timer int */ - GALILEO_OUTL(0x100, GT_INTRMASK_OFS); + /* Register interrupt */ + setup_irq(COBALT_GALILEO_IRQ, irq); + + /* Enable interrupt */ + GALILEO_OUTL(GALILEO_INTR_T0EXP | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS); } extern struct pci_ops gt64111_pci_ops; static struct resource cobalt_mem_resource = { - "GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM + "PCI memory", GT64111_MEM_BASE, GT64111_MEM_END, IORESOURCE_MEM }; static struct resource cobalt_io_resource = { - "GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO + "PCI I/O", 0x1000, 0xffff, IORESOURCE_IO }; static struct resource cobalt_io_resources[] = { @@ -86,11 +88,12 @@ static struct pci_controller cobalt_pci_controller = { .mem_resource = &cobalt_mem_resource, .mem_offset = 0, .io_resource = &cobalt_io_resource, - .io_offset = 0x00001000UL - GT64111_IO_BASE + .io_offset = 0 - GT64111_IO_BASE }; void __init plat_setup(void) { + static struct uart_port uart; unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0); int i; @@ -100,7 +103,10 @@ void __init plat_setup(void) board_timer_setup = cobalt_timer_setup; - set_io_port_base(KSEG1ADDR(GT64111_IO_BASE)); + set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE)); + + /* I/O port resource must include UART and LCD/buttons */ + ioport_resource.end = 0x0fffffff; /* * This is a prom style console. We just poke at the @@ -120,25 +126,61 @@ void __init plat_setup(void) cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8); cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id); + printk("Cobalt board ID: %d\n", cobalt_board_id); + #ifdef CONFIG_PCI register_pci_controller(&cobalt_pci_controller); #endif + +#ifdef CONFIG_SERIAL_8250 + if (cobalt_board_id > COBALT_BRD_ID_RAQ1) { + + uart.line = 0; + uart.type = PORT_UNKNOWN; + uart.uartclk = 18432000; + uart.irq = COBALT_SERIAL_IRQ; + uart.flags = STD_COM_FLAGS; + uart.iobase = 0xc800000; + uart.iotype = UPIO_PORT; + + early_serial_setup(&uart); + } +#endif } /* * Prom init. We read our one and only communication with the firmware. - * Grab the amount of installed memory + * Grab the amount of installed memory. + * Better boot loaders (CoLo) pass a command line too :-) */ void __init prom_init(void) { - int argc = fw_arg0; - - strcpy(arcs_cmdline, my_cmdline); + int narg, indx, posn, nchr; + unsigned long memsz; + char **argv; mips_machgroup = MACH_GROUP_COBALT; - add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM); + memsz = fw_arg0 & 0x7fff0000; + narg = fw_arg0 & 0x0000ffff; + + if (narg) { + arcs_cmdline[0] = '\0'; + argv = (char **) fw_arg1; + posn = 0; + for (indx = 1; indx < narg; ++indx) { + nchr = strlen(argv[indx]); + if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline)) + break; + if (posn) + arcs_cmdline[posn++] = ' '; + strcpy(arcs_cmdline + posn, argv[indx]); + posn += nchr; + } + } + + add_memory_region(0x0, memsz, BOOT_MEM_RAM); } unsigned long __init prom_free_prom_memory(void) diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index 57e1ca2116bb..909292f50d06 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -21,6 +21,20 @@ extern int cobalt_board_id; +static void qube_raq_galileo_early_fixup(struct pci_dev *dev) +{ + if (dev->devfn == PCI_DEVFN(0, 0) && + (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) { + + dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff); + + printk(KERN_INFO "Galileo: fixed bridge class\n"); + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, + qube_raq_galileo_early_fixup); + static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev) { unsigned short cfgword; @@ -48,6 +62,9 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) { unsigned short galileo_id; + if (dev->devfn != PCI_DEVFN(0, 0)) + return; + /* Fix PCI latency-timer and cache-line-size values in Galileo * host bridge. */ @@ -55,6 +72,13 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7); /* + * The code described by the comment below has been removed + * as it causes bus mastering by the Ethernet controllers + * to break under any kind of network load. We always set + * the retry timeouts to their maximum. + * + * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x-- + * * On all machines prior to Q2, we had the STOP line disconnected * from Galileo to VIA on PCI. The new Galileo does not function * correctly unless we have it connected. @@ -64,21 +88,43 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev) */ pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id); galileo_id &= 0xff; /* mask off class info */ + + printk(KERN_INFO "Galileo: revision %u\n", galileo_id); + +#if 0 if (galileo_id >= 0x10) { /* New Galileo, assumes PCI stop line to VIA is connected. */ GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS); - } else if (galileo_id == 0x1 || galileo_id == 0x2) { + } else if (galileo_id == 0x1 || galileo_id == 0x2) +#endif + { signed int timeo; /* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */ timeo = GALILEO_INL(GT_PCI0_TOR_OFS); /* Old Galileo, assumes PCI STOP line to VIA is disconnected. */ - GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS); + GALILEO_OUTL( + (0xff << 16) | /* retry count */ + (0xff << 8) | /* timeout 1 */ + 0xff, /* timeout 0 */ + GT_PCI0_TOR_OFS); + + /* enable PCI retry exceeded interrupt */ + GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS); } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID, +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, qube_raq_galileo_fixup); +static char irq_tab_qube1[] __initdata = { + [COBALT_PCICONF_CPU] = 0, + [COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ, + [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ, + [COBALT_PCICONF_VIA] = 0, + [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ, + [COBALT_PCICONF_ETH1] = 0 +}; + static char irq_tab_cobalt[] __initdata = { [COBALT_PCICONF_CPU] = 0, [COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ, @@ -99,6 +145,9 @@ static char irq_tab_raq2[] __initdata = { int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + if (cobalt_board_id < COBALT_BRD_ID_QUBE2) + return irq_tab_qube1[slot]; + if (cobalt_board_id == COBALT_BRD_ID_RAQ2) return irq_tab_raq2[slot]; diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c index c5b0fc184c2a..c1807934768d 100644 --- a/arch/mips/pci/ops-gt64111.c +++ b/arch/mips/pci/ops-gt64111.c @@ -18,15 +18,15 @@ #include /* - * Accessing device 31 hangs the GT64120. Not sure if this will also hang - * the GT64111, let's be paranoid for now. + * Device 31 on the GT64111 is used to generate PCI special + * cycles, so we shouldn't expected to find a device there ... */ static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn) { - if (bus->number == 0 && devfn == PCI_DEVFN(31, 0)) - return -1; + if (bus->number == 0 && PCI_SLOT(devfn) < 31) + return 0; - return 0; + return -1; } static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn, diff --git a/drivers/char/lcd.c b/drivers/char/lcd.c index b77161146144..29963d8be667 100644 --- a/drivers/char/lcd.c +++ b/drivers/char/lcd.c @@ -575,8 +575,8 @@ static inline int button_pressed(void) static int lcd_waiters = 0; -static long lcd_read(struct inode *inode, struct file *file, char *buf, - unsigned long count) +static ssize_t lcd_read(struct file *file, char *buf, + size_t count, loff_t *ofs) { long buttons_now; diff --git a/drivers/char/lcd.h b/drivers/char/lcd.h index 878a95280e87..a8d4ae737158 100644 --- a/drivers/char/lcd.h +++ b/drivers/char/lcd.h @@ -22,7 +22,7 @@ static int timeout(volatile unsigned long); #define MAX_IDLE_TIME 120 struct lcd_display { - unsigned long buttons; + unsigned buttons; int size1; int size2; unsigned char line1[LCD_CHARS_PER_LINE]; diff --git a/include/asm-mips/cobalt/cobalt.h b/include/asm-mips/cobalt/cobalt.h index ca1fbc0579fe..78e1df2095fb 100644 --- a/include/asm-mips/cobalt/cobalt.h +++ b/include/asm-mips/cobalt/cobalt.h @@ -19,18 +19,23 @@ * 9 - PCI * 14 - IDE0 * 15 - IDE1 - * + */ +#define COBALT_QUBE_SLOT_IRQ 9 + +/* * CPU IRQs are 16 ... 23 */ -#define COBALT_TIMER_IRQ 18 -#define COBALT_SCC_IRQ 19 /* pre-production has 85C30 */ -#define COBALT_RAQ_SCSI_IRQ 19 -#define COBALT_ETH0_IRQ 19 -#define COBALT_ETH1_IRQ 20 -#define COBALT_SERIAL_IRQ 21 -#define COBALT_SCSI_IRQ 21 -#define COBALT_VIA_IRQ 22 /* Chained to VIA ISA bridge */ -#define COBALT_QUBE_SLOT_IRQ 23 +#define COBALT_CPU_IRQ 16 + +#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2) +#define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */ +#define COBALT_RAQ_SCSI_IRQ (COBALT_CPU_IRQ + 3) +#define COBALT_ETH0_IRQ (COBALT_CPU_IRQ + 3) +#define COBALT_QUBE1_ETH0_IRQ (COBALT_CPU_IRQ + 4) +#define COBALT_ETH1_IRQ (COBALT_CPU_IRQ + 4) +#define COBALT_SERIAL_IRQ (COBALT_CPU_IRQ + 5) +#define COBALT_SCSI_IRQ (COBALT_CPU_IRQ + 5) +#define COBALT_VIA_IRQ (COBALT_CPU_IRQ + 6) /* Chained to VIA ISA bridge */ /* * PCI configuration space manifest constants. These are wired into @@ -69,16 +74,21 @@ * Most of this really should go into a separate GT64111 header file. */ #define GT64111_IO_BASE 0x10000000UL +#define GT64111_IO_END 0x11ffffffUL +#define GT64111_MEM_BASE 0x12000000UL +#define GT64111_MEM_END 0x13ffffffUL #define GT64111_BASE 0x14000000UL -#define GALILEO_REG(ofs) (KSEG0 + GT64111_BASE + (unsigned long)(ofs)) +#define GALILEO_REG(ofs) CKSEG1ADDR(GT64111_BASE + (unsigned long)(ofs)) #define GALILEO_INL(port) (*(volatile unsigned int *) GALILEO_REG(port)) #define GALILEO_OUTL(val, port) \ do { \ - *(volatile unsigned int *) GALILEO_REG(port) = (port); \ + *(volatile unsigned int *) GALILEO_REG(port) = (val); \ } while (0) -#define GALILEO_T0EXP 0x0100 +#define GALILEO_INTR_T0EXP (1 << 8) +#define GALILEO_INTR_RETRY_CTR (1 << 20) + #define GALILEO_ENTC0 0x01 #define GALILEO_SELTC0 0x02 @@ -86,5 +96,21 @@ do { \ GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) | \ (PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS) +#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000)) +# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */ +# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */ +# define COBALT_LED_WEB (1 << 2) /* RaQ */ +# define COBALT_LED_POWER_OFF (1 << 3) /* RaQ */ +# define COBALT_LED_RESET 0x0f + +#define COBALT_KEY_PORT ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK) +# define COBALT_KEY_CLEAR (1 << 1) +# define COBALT_KEY_LEFT (1 << 2) +# define COBALT_KEY_UP (1 << 3) +# define COBALT_KEY_DOWN (1 << 4) +# define COBALT_KEY_RIGHT (1 << 5) +# define COBALT_KEY_ENTER (1 << 6) +# define COBALT_KEY_SELECT (1 << 7) +# define COBALT_KEY_MASK 0xfe #endif /* __ASM_COBALT_H */ diff --git a/include/asm-mips/cobalt/mach-gt64120.h b/include/asm-mips/cobalt/mach-gt64120.h new file mode 100644 index 000000000000..587fc4378f44 --- /dev/null +++ b/include/asm-mips/cobalt/mach-gt64120.h @@ -0,0 +1 @@ +/* there's something here ... in the dark */ diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h index 4eed8e2acdc3..780197abb8ff 100644 --- a/include/asm-mips/serial.h +++ b/include/asm-mips/serial.h @@ -52,16 +52,6 @@ #define JAZZ_SERIAL_PORT_DEFNS #endif -#ifdef CONFIG_MIPS_COBALT -#include -#define COBALT_BASE_BAUD (18432000 / 16) -#define COBALT_SERIAL_PORT_DEFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, COBALT_BASE_BAUD, 0xc800000, COBALT_SERIAL_IRQ, STD_COM_FLAGS }, /* ttyS0 */ -#else -#define COBALT_SERIAL_PORT_DEFNS -#endif - /* * Both Galileo boards have the same UART mappings. */ @@ -342,7 +332,6 @@ #endif /* CONFIG_SGI_IP32 */ #define SERIAL_PORT_DFNS \ - COBALT_SERIAL_PORT_DEFNS \ DDB5477_SERIAL_PORT_DEFNS \ EV96100_SERIAL_PORT_DEFNS \ IP32_SERIAL_PORT_DEFNS \ -- GitLab From 1f82bdb11ba141b3a1d37ac8c307686d56544cfe Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 21 Feb 2005 19:50:31 +0000 Subject: [PATCH 0945/1519] Define MAP_BASE for IP27 Signed-off-by: Ralf Baechle --- include/asm-mips/mach-ip27/spaces.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-mips/mach-ip27/spaces.h b/include/asm-mips/mach-ip27/spaces.h index e3b3fe32eeb1..45e61785ef42 100644 --- a/include/asm-mips/mach-ip27/spaces.h +++ b/include/asm-mips/mach-ip27/spaces.h @@ -20,6 +20,7 @@ #define IO_BASE 0x9200000000000000 #define MSPEC_BASE 0x9400000000000000 #define UNCAC_BASE 0x9600000000000000 +#define MAP_BASE 0xc000000000000000 #define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) #define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK)) -- GitLab From 0ac354801a879181471331c5b9be021bf5b9d515 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 21 Feb 2005 21:34:24 +0000 Subject: [PATCH 0946/1519] On multiprocessor systems the BogoMIPS for each CPU was reported was the value for the last CPU having calibrated it's delay loop. Signed-off-by: Ralf Baechle --- arch/mips/kernel/proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 0f159f30e894..760fcdfea18e 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -105,8 +105,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) (version >> 4) & 0x0f, version & 0x0f, (fp_vers >> 4) & 0x0f, fp_vers & 0x0f); seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n", - loops_per_jiffy / (500000/HZ), - (loops_per_jiffy / (5000/HZ)) % 100); + cpu_data[n].udelay_val / (500000/HZ), + (cpu_data[n].udelay_val / (5000/HZ)) % 100); seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no"); seq_printf(m, "microsecond timers\t: %s\n", cpu_has_counter ? "yes" : "no"); -- GitLab From b727a60258730b331519fedda503a8da78638791 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 22 Feb 2005 21:18:01 +0000 Subject: [PATCH 0947/1519] Merge do_boot_cpu() into the new style __cpu_up(). Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp.c | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-) diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 1d3a4b501949..d1828ef5ffd6 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -248,23 +248,28 @@ void __devinit smp_prepare_boot_cpu(void) } /* - * Startup the CPU with this logical number + * Called once for each "cpu_possible(cpu)". Needs to spin up the cpu + * and keep control until "cpu_online(cpu)" is set. Note: cpu is + * physical, not logical. */ -static int __init do_boot_cpu(int cpu) +int __devinit __cpu_up(unsigned int cpu) { struct task_struct *idle; /* + * Processor goes to start_secondary(), sets online flag * The following code is purely to make sure * Linux can schedule processes on this slave. */ idle = fork_idle(cpu); if (IS_ERR(idle)) - panic("failed fork for CPU %d\n", cpu); + panic(KERN_ERR "Fork failed for CPU %d", cpu); prom_boot_secondary(cpu, idle); - /* XXXKW timeout */ + /* + * Trust is futile. We should really have timeouts ... + */ while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); @@ -273,23 +278,6 @@ static int __init do_boot_cpu(int cpu) return 0; } -/* - * Called once for each "cpu_possible(cpu)". Needs to spin up the cpu - * and keep control until "cpu_online(cpu)" is set. Note: cpu is - * physical, not logical. - */ -int __devinit __cpu_up(unsigned int cpu) -{ - int ret; - - /* Processor goes to start_secondary(), sets online flag */ - ret = do_boot_cpu(cpu); - if (ret < 0) - return ret; - - return 0; -} - /* Not really SMP stuff ... */ int setup_profiling_timer(unsigned int multiplier) { -- GitLab From 4912ba72d6e27d0f19ec062ffd00a8c0165a2f67 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 22 Feb 2005 21:49:17 +0000 Subject: [PATCH 0948/1519] Define mem_*() I/O accessory functions that preserve byte addresses. Add missing ____raw_*q() functions. Signed-off-by: Ralf Baechle --- include/asm-mips/io.h | 46 +++++++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 19 deletions(-) diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 1f2fe11f4124..644c085e29f3 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -34,7 +34,7 @@ #undef CONF_SLOWDOWN_IO /* - * Raw operations are never swapped in software. Otoh values that raw + * Raw operations are never swapped in software. OTOH values that raw * operations are working on may or may not have been swapped by the bus * hardware. An example use would be for flash memory that's used for * execute in place. @@ -43,45 +43,53 @@ # define __raw_ioswabw(x) (x) # define __raw_ioswabl(x) (x) # define __raw_ioswabq(x) (x) +# define ____raw_ioswabq(x) (x) /* * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware; * less sane hardware forces software to fiddle with this... + * + * Regardless, if the host bus endianness mismatches that of PCI/ISA, then + * you can't have the numerical value of data and byte addresses within + * multibyte quantities both preserved at the same time. Hence two + * variations of functions: non-prefixed ones that preserve the value + * and prefixed ones that preserve byte addresses. The latters are + * typically used for moving raw data between a peripheral and memory (cf. + * string I/O functions), hence the "mem_" prefix. */ #if defined(CONFIG_SWAP_IO_SPACE) # define ioswabb(x) (x) +# define mem_ioswabb(x) (x) # ifdef CONFIG_SGI_IP22 /* * IP22 seems braindead enough to swap 16bits values in hardware, but * not 32bits. Go figure... Can't tell without documentation. */ # define ioswabw(x) (x) +# define mem_ioswabw(x) le16_to_cpu(x) # else # define ioswabw(x) le16_to_cpu(x) +# define mem_ioswabw(x) (x) # endif # define ioswabl(x) le32_to_cpu(x) +# define mem_ioswabl(x) (x) # define ioswabq(x) le64_to_cpu(x) +# define mem_ioswabq(x) (x) #else # define ioswabb(x) (x) +# define mem_ioswabb(x) (x) # define ioswabw(x) (x) +# define mem_ioswabw(x) cpu_to_le16(x) # define ioswabl(x) (x) +# define mem_ioswabl(x) cpu_to_le32(x) # define ioswabq(x) (x) +# define mem_ioswabq(x) cpu_to_le32(x) #endif -/* - * Native bus accesses never swapped. - */ -#define bus_ioswabb(x) (x) -#define bus_ioswabw(x) (x) -#define bus_ioswabl(x) (x) -#define bus_ioswabq(x) (x) - -#define __bus_ioswabq bus_ioswabq - #define IO_SPACE_LIMIT 0xffff /* @@ -388,15 +396,15 @@ __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO) #define BUILDIO(bwlq, type) \ \ -__BUILD_MEMORY_PFX(, bwlq, type) \ __BUILD_MEMORY_PFX(__raw_, bwlq, type) \ -__BUILD_MEMORY_PFX(bus_, bwlq, type) \ +__BUILD_MEMORY_PFX(, bwlq, type) \ +__BUILD_MEMORY_PFX(mem_, bwlq, type) \ __BUILD_IOPORT_PFX(, bwlq, type) \ -__BUILD_IOPORT_PFX(__raw_, bwlq, type) +__BUILD_IOPORT_PFX(mem_, bwlq, type) #define __BUILDIO(bwlq, type) \ \ -__BUILD_MEMORY_SINGLE(__bus_, bwlq, type, 0) +__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0) BUILDIO(b, u8) BUILDIO(w, u16) @@ -424,7 +432,7 @@ static inline void writes##bwlq(volatile void __iomem *mem, void *addr, \ volatile type *__addr = addr; \ \ while (count--) { \ - __raw_write##bwlq(*__addr, mem); \ + mem_write##bwlq(*__addr, mem); \ __addr++; \ } \ } \ @@ -435,7 +443,7 @@ static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ volatile type *__addr = addr; \ \ while (count--) { \ - *__addr = __raw_read##bwlq(mem); \ + *__addr = mem_read##bwlq(mem); \ __addr++; \ } \ } @@ -448,7 +456,7 @@ static inline void outs##bwlq(unsigned long port, void *addr, \ volatile type *__addr = addr; \ \ while (count--) { \ - __raw_out##bwlq(*__addr, port); \ + mem_out##bwlq(*__addr, port); \ __addr++; \ } \ } \ @@ -459,7 +467,7 @@ static inline void ins##bwlq(unsigned long port, void *addr, \ volatile type *__addr = addr; \ \ while (count--) { \ - *__addr = __raw_in##bwlq(port); \ + *__addr = mem_in##bwlq(port); \ __addr++; \ } \ } -- GitLab From 65bda1a95d395c256818d1d8129487a4497b29d8 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 22 Feb 2005 21:51:30 +0000 Subject: [PATCH 0949/1519] Switch SiByte drivers back to __raw_*() functions. Signed-off-by: Ralf Baechle --- arch/mips/mm/pg-sb1.c | 28 ++--- arch/mips/sibyte/sb1250/bcm1250_tbprof.c | 130 ++++++++++++----------- arch/mips/sibyte/sb1250/bus_watcher.c | 2 +- arch/mips/sibyte/sb1250/irq.c | 88 +++++++-------- arch/mips/sibyte/sb1250/setup.c | 4 +- arch/mips/sibyte/sb1250/smp.c | 18 ++-- arch/mips/sibyte/sb1250/time.c | 26 ++--- arch/mips/sibyte/swarm/rtc_m41t81.c | 47 ++++---- arch/mips/sibyte/swarm/rtc_xicor1241.c | 42 ++++---- arch/mips/sibyte/swarm/time.c | 44 ++++---- include/asm-mips/sibyte/sb1250.h | 2 +- 11 files changed, 221 insertions(+), 210 deletions(-) diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c index 1b6df7133c1e..7a90ea383845 100644 --- a/arch/mips/mm/pg-sb1.c +++ b/arch/mips/mm/pg-sb1.c @@ -214,12 +214,12 @@ void sb1_dma_init(void) int cpu = smp_processor_id(); u64 base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1); - bus_writeq(base_val, - (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); - bus_writeq(base_val | M_DM_DSCR_BASE_RESET, - (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); - bus_writeq(base_val | M_DM_DSCR_BASE_ENABL, - (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_writeq(base_val, + IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_writeq(base_val | M_DM_DSCR_BASE_RESET, + IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, + IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); } void clear_page(void *page) @@ -232,16 +232,16 @@ void clear_page(void *page) page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); - bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); + __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); /* * Don't really want to do it this way, but there's no * reliable way to delay completion detection. */ - while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) & - M_DM_DSCR_BASE_INTERRUPT)))) + while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG))) + M_DM_DSCR_BASE_INTERRUPT))) ; - bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); } void copy_page(void *to, void *from) @@ -257,16 +257,16 @@ void copy_page(void *to, void *from) page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); - bus_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); + __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); /* * Don't really want to do it this way, but there's no * reliable way to delay completion detection. */ - while (!(bus_readq((void *)(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) & - M_DM_DSCR_BASE_INTERRUPT)))) + while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) & + M_DM_DSCR_BASE_INTERRUPT))) ; - bus_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); } #else /* !CONFIG_SIBYTE_DMA_PAGEOPS */ diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c index dba3d0872e7e..e4dfeb52dcec 100644 --- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c +++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c @@ -65,24 +65,25 @@ static void arm_tb(void) u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL; /* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger start of trace. XXX vary sampling period */ - bus_writeq(0, IOADDR(A_SCD_PERF_CNT_1)); - scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG)); + __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1)); + scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); /* Unfortunately, in Pass 2 we must clear all counters to knock down a previous interrupt request. This means that bus profiling requires ALL of the SCD perf counters. */ - bus_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is - M_SPC_CFG_ENABLE | // enable counting - M_SPC_CFG_CLEAR | // clear all counters - V_SPC_CFG_SRC1(1), // counter 1 counts cycles - IOADDR(A_SCD_PERF_CNT_CFG)); - bus_writeq(next, IOADDR(A_SCD_PERF_CNT_1)); + __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | + // keep counters 0,2,3 as is + M_SPC_CFG_ENABLE | // enable counting + M_SPC_CFG_CLEAR | // clear all counters + V_SPC_CFG_SRC1(1), // counter 1 counts cycles + IOADDR(A_SCD_PERF_CNT_CFG)); + __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1)); /* Reset the trace buffer */ - bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT) /* XXXKW may want to expose control to the data-collector */ tb_options |= M_SCD_TRACE_CFG_FORCECNT; #endif - bus_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 1; } @@ -94,23 +95,30 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs) /* XXX should use XKPHYS to make writes bypass L2 */ u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++]; /* Read out trace */ - bus_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(M_SCD_TRACE_CFG_START_READ, + IOADDR(A_SCD_TRACE_CFG)); __asm__ __volatile__ ("sync" : : : "memory"); /* Loop runs backwards because bundles are read out in reverse order */ for (i = 256 * 6; i > 0; i -= 6) { // Subscripts decrease to put bundle in the order // t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi - p[i-1] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi - p[i-2] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo - p[i-3] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi - p[i-4] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo - p[i-5] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi - p[i-6] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo + p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t2 hi + p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t2 lo + p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t1 hi + p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t1 lo + p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t0 hi + p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + // read t0 lo } if (!sbp.tb_enable) { DBG(printk(DEVNAME ": tb_intr shutdown\n")); - bus_writeq(M_SCD_TRACE_CFG_RESET, - IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(M_SCD_TRACE_CFG_RESET, + IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 0; wake_up(&sbp.tb_sync); } else { @@ -119,7 +127,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs) } else { /* No more trace buffer samples */ DBG(printk(DEVNAME ": tb_intr full\n")); - bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 0; if (!sbp.tb_enable) { wake_up(&sbp.tb_sync); @@ -153,13 +161,11 @@ int sbprof_zbprof_start(struct file *filp) return -EBUSY; } /* Make sure there isn't a perf-cnt interrupt waiting */ - scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG)); + scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); /* Disable and clear counters, override SRC_1 */ - bus_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) | - M_SPC_CFG_ENABLE | - M_SPC_CFG_CLEAR | - V_SPC_CFG_SRC1(1), - IOADDR(A_SCD_PERF_CNT_CFG)); + __raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) | + M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1), + IOADDR(A_SCD_PERF_CNT_CFG)); /* We grab this interrupt to prevent others from trying to use it, even though we don't want to service the interrupts @@ -173,55 +179,55 @@ int sbprof_zbprof_start(struct file *filp) /* I need the core to mask these, but the interrupt mapper to pass them through. I am exploiting my knowledge that cp0_status masks out IP[5]. krw */ - bus_writeq(K_INT_MAP_I3, - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + - (K_INT_PERF_CNT << 3))); + __raw_writeq(K_INT_MAP_I3, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_PERF_CNT << 3))); /* Initialize address traps */ - bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_0)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_1)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_2)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_3)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2)); - bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); /* Initialize Trace Event 0-7 */ // when interrupt - bus_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6)); - bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7)); + __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7)); /* Initialize Trace Sequence 0-7 */ // Start on event 0 (interrupt) - bus_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff, - IOADDR(A_SCD_TRACE_SEQUENCE_0)); + __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff, + IOADDR(A_SCD_TRACE_SEQUENCE_0)); // dsamp when d used | asamp when a used - bus_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | - K_SCD_TRSEQ_TRIGGER_ALL, - IOADDR(A_SCD_TRACE_SEQUENCE_1)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6)); - bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); + __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | + K_SCD_TRSEQ_TRIGGER_ALL, + IOADDR(A_SCD_TRACE_SEQUENCE_1)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); /* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */ - bus_writeq((1ULL << K_INT_PERF_CNT), - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE))); + __raw_writeq(1ULL << K_INT_PERF_CNT, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE))); arm_tb(); diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c index 1a97e3127aeb..482dee054e68 100644 --- a/arch/mips/sibyte/sb1250/bus_watcher.c +++ b/arch/mips/sibyte/sb1250/bus_watcher.c @@ -189,7 +189,7 @@ static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs) for (i=0; i<256*6; i++) printk("%016llx\n", - (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ))); + (long long)__raw_readq(IOADDR(A_SCD_TRACE_READ))); csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG)); diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 2725b263cced..a62cba9f32ba 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -96,11 +96,11 @@ void sb1250_mask_irq(int cpu, int irq) u64 cur_ints; spin_lock_irqsave(&sb1250_imr_lock, flags); - cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); cur_ints |= (((u64) 1) << irq); - __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); spin_unlock_irqrestore(&sb1250_imr_lock, flags); } @@ -110,11 +110,11 @@ void sb1250_unmask_irq(int cpu, int irq) u64 cur_ints; spin_lock_irqsave(&sb1250_imr_lock, flags); - cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); cur_ints &= ~(((u64) 1) << irq); - __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); spin_unlock_irqrestore(&sb1250_imr_lock, flags); } @@ -149,23 +149,23 @@ static void sb1250_set_affinity(unsigned int irq, unsigned long mask) /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = sb1250_irq_owner[irq]; - cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) + - R_IMR_INTERRUPT_MASK)); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); int_on = !(cur_ints & (((u64) 1) << irq)); if (int_on) { /* If it was on, mask it */ cur_ints |= (((u64) 1) << irq); - __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + - R_IMR_INTERRUPT_MASK)); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); } sb1250_irq_owner[irq] = cpu; if (int_on) { /* unmask for the new CPU */ - cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); cur_ints &= ~(((u64) 1) << irq); - __bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + - R_IMR_INTERRUPT_MASK)); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); } spin_unlock(&sb1250_imr_lock); spin_unlock_irqrestore(&desc->lock, flags); @@ -208,8 +208,8 @@ static void ack_sb1250_irq(unsigned int irq) * deliver the interrupts to all CPUs (which makes affinity * changing easier for us) */ - pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], - R_IMR_LDT_INTERRUPT))); + pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], + R_IMR_LDT_INTERRUPT))); pending &= ((u64)1 << (irq)); if (pending) { int i; @@ -224,8 +224,8 @@ static void ack_sb1250_irq(unsigned int irq) * Clear for all CPUs so an affinity switch * doesn't find an old status */ - bus_writeq(pending, - IOADDR(A_IMR_REGISTER(cpu, + __raw_writeq(pending, + IOADDR(A_IMR_REGISTER(cpu, R_IMR_LDT_INTERRUPT_CLR))); } @@ -340,12 +340,14 @@ void __init arch_init_irq(void) /* Default everything to IP2 */ for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */ - bus_writeq(IMR_IP2_VAL, - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + - (i << 3))); - bus_writeq(IMR_IP2_VAL, - IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + - (i << 3))); + __raw_writeq(IMR_IP2_VAL, + IOADDR(A_IMR_REGISTER(0, + R_IMR_INTERRUPT_MAP_BASE) + + (i << 3))); + __raw_writeq(IMR_IP2_VAL, + IOADDR(A_IMR_REGISTER(1, + R_IMR_INTERRUPT_MAP_BASE) + + (i << 3))); } init_sb1250_irqs(); @@ -355,23 +357,23 @@ void __init arch_init_irq(void) * inter-cpu messages */ /* Was I1 */ - bus_writeq(IMR_IP3_VAL, - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + - (K_INT_MBOX_0 << 3))); - bus_writeq(IMR_IP3_VAL, - IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + - (K_INT_MBOX_0 << 3))); + __raw_writeq(IMR_IP3_VAL, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_MBOX_0 << 3))); + __raw_writeq(IMR_IP3_VAL, + IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_MBOX_0 << 3))); /* Clear the mailboxes. The firmware may leave them dirty */ - bus_writeq(0xffffffffffffffffULL, - IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU))); - bus_writeq(0xffffffffffffffffULL, - IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU))); + __raw_writeq(0xffffffffffffffffULL, + IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU))); + __raw_writeq(0xffffffffffffffffULL, + IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU))); /* Mask everything except the mailbox registers for both cpus */ tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0); - bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK))); - bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK))); + __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK))); + __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK))); sb1250_steal_irq(K_INT_MBOX_0); @@ -396,12 +398,14 @@ void __init arch_init_irq(void) sb1250_duart_present[kgdb_port] = 0; #endif /* Setup uart 1 settings, mapper */ - bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port))); + __raw_writeq(M_DUART_IMR_BRK, + IOADDR(A_DUART_IMRREG(kgdb_port))); sb1250_steal_irq(kgdb_irq); - bus_writeq(IMR_IP6_VAL, - IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + - (kgdb_irq<<3))); + __raw_writeq(IMR_IP6_VAL, + IOADDR(A_IMR_REGISTER(0, + R_IMR_INTERRUPT_MAP_BASE) + + (kgdb_irq << 3))); sb1250_unmask_irq(0, kgdb_irq); } #endif diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c index f8c605be96c7..df2e266c700c 100644 --- a/arch/mips/sibyte/sb1250/setup.c +++ b/arch/mips/sibyte/sb1250/setup.c @@ -153,7 +153,7 @@ void sb1250_setup(void) int bad_config = 0; sb1_pass = read_c0_prid() & 0xff; - sys_rev = bus_readq(IOADDR(A_SCD_SYSTEM_REVISION)); + sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION)); soc_type = SYS_SOC_TYPE(sys_rev); soc_pass = G_SYS_REVISION(sys_rev); @@ -162,7 +162,7 @@ void sb1250_setup(void) machine_restart(NULL); } - plldiv = G_SYS_PLL_DIV(bus_readq(IOADDR(A_SCD_SYSTEM_CFG))); + plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25); prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n", diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c index be91b3990952..f859db02d3c9 100644 --- a/arch/mips/sibyte/sb1250/smp.c +++ b/arch/mips/sibyte/sb1250/smp.c @@ -29,18 +29,18 @@ #include static void *mailbox_set_regs[] = { - (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU), - (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU) + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU) }; static void *mailbox_clear_regs[] = { - (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU), - (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU) + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU) }; static void *mailbox_regs[] = { - (void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU), - (void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU) + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU) }; /* @@ -73,7 +73,7 @@ void sb1250_smp_finish(void) */ void core_send_ipi(int cpu, unsigned int action) { - bus_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); + __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); } void sb1250_mailbox_interrupt(struct pt_regs *regs) @@ -83,10 +83,10 @@ void sb1250_mailbox_interrupt(struct pt_regs *regs) kstat_this_cpu.irqs[K_INT_MBOX_0]++; /* Load the mailbox register to figure out what we're supposed to do */ - action = (__bus_readq(mailbox_regs[cpu]) >> 48) & 0xffff; + action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff; /* Clear the mailbox to clear the interrupt */ - __bus_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]); + ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]); /* * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index 8b4c848c907b..0ffbc835b116 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -67,24 +67,24 @@ void sb1250_time_init(void) sb1250_mask_irq(cpu, irq); /* Map the timer interrupt to ip[4] of this cpu */ - bus_writeq(IMR_IP4_VAL, - IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) + - (irq << 3))); + __raw_writeq(IMR_IP4_VAL, + IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) + + (irq << 3))); /* the general purpose timer ticks at 1 Mhz independent if the rest of the system */ /* Disable the timer and set up the count */ - bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); + __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); #ifdef CONFIG_SIMULATION - bus_writeq(50000 / HZ, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); + __raw_writeq(50000 / HZ, + IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #else - bus_writeq(1000000/HZ, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); + __raw_writeq(1000000 / HZ, + IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); #endif /* Set the timer running */ - bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); sb1250_unmask_irq(cpu, irq); sb1250_steal_irq(irq); @@ -105,8 +105,8 @@ void sb1250_timer_interrupt(struct pt_regs *regs) int irq = K_INT_TIMER_0 + cpu; /* Reset the timer */ - __bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, - IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); + ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); /* * CPU 0 handles the global timer interrupt job @@ -130,7 +130,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs) unsigned long sb1250_gettimeoffset(void) { unsigned long count = - bus_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); + __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); return 1000000/HZ - count; } diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c index a686bb716ec6..5b4fc26c1b36 100644 --- a/arch/mips/sibyte/swarm/rtc_m41t81.c +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -82,59 +82,60 @@ #define M41T81REG_SQW 0x13 /* square wave register */ #define M41T81_CCR_ADDRESS 0x68 -#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg)))) + +#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) static int m41t81_read(uint8_t addr) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); - bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } - return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff); + return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); } static int m41t81_write(uint8_t addr, int b) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD)); - bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA)); - bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, - SMB_CSR(R_SMB_START)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); + __raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } /* read the same byte again to make sure it is written */ - bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, - SMB_CSR(R_SMB_START)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; return 0; diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c index 981d21f16e64..d9ff9323f24e 100644 --- a/arch/mips/sibyte/swarm/rtc_xicor1241.c +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -57,52 +57,52 @@ #define X1241_CCR_ADDRESS 0x6F -#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg)))) +#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) static int xicor_read(uint8_t addr) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); - bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA)); - bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } - return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff); + return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); } static int xicor_write(uint8_t addr, int b) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq(addr, SMB_CSR(R_SMB_CMD)); - bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); - bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, - SMB_CSR(R_SMB_START)); + __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); + __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } else { return 0; diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c index c1f1a9defeeb..97c73c793c35 100644 --- a/arch/mips/sibyte/swarm/time.c +++ b/arch/mips/sibyte/swarm/time.c @@ -79,48 +79,48 @@ static unsigned int usec_bias = 0; static int xicor_read(uint8_t addr) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); - bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA)); - bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE), - SMB_CSR(R_SMB_START)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } - return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff); + return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); } static int xicor_write(uint8_t addr, int b) { - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - bus_writeq(addr, SMB_CSR(R_SMB_CMD)); - bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); - bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, - SMB_CSR(R_SMB_START)); + __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); + __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, + SMB_CSR(R_SMB_START)); - while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) ; - if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { /* Clear error bit by writing a 1 */ - bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); return -1; } else { return 0; @@ -228,8 +228,8 @@ void __init swarm_time_init(void) /* Establish communication with the Xicor 1241 RTC */ /* XXXKW how do I share the SMBus with the I2C subsystem? */ - bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ)); - bus_writeq(0, SMB_CSR(R_SMB_CONTROL)); + __raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ)); + __raw_writeq(0, SMB_CSR(R_SMB_CONTROL)); if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) { printk("x1241: couldn't detect on SWARM SMBus 1\n"); diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h index d62da4e2dd36..177747ad7a59 100644 --- a/include/asm-mips/sibyte/sb1250.h +++ b/include/asm-mips/sibyte/sb1250.h @@ -58,6 +58,6 @@ extern void prom_printf(char *fmt, ...); #endif -#define IOADDR(a) (IO_BASE + (a)) +#define IOADDR(a) ((void *)(IO_BASE + (a))) #endif -- GitLab From 685f779e6046e18b6190d2fbc9ef22e6b81c196e Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Fri, 25 Feb 2005 13:11:18 +0000 Subject: [PATCH 0950/1519] Fix initialization. Unbreak the wait-for-completion loops. Code cleanup. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/mm/pg-sb1.c | 46 ++++++++++++++++++++++--------------------- 1 file changed, 24 insertions(+), 22 deletions(-) diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c index 7a90ea383845..162bb155e695 100644 --- a/arch/mips/mm/pg-sb1.c +++ b/arch/mips/mm/pg-sb1.c @@ -207,30 +207,32 @@ typedef struct dmadscr_s { u64 pad_b; } dmadscr_t; -static dmadscr_t page_descr[NR_CPUS] __attribute__((aligned(SMP_CACHE_BYTES))); +static dmadscr_t page_descr[DM_NUM_CHANNELS] __attribute__((aligned(SMP_CACHE_BYTES))); void sb1_dma_init(void) { - int cpu = smp_processor_id(); - u64 base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1); + int i; - __raw_writeq(base_val, - IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); - __raw_writeq(base_val | M_DM_DSCR_BASE_RESET, - IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); - __raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, - IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); + for (i = 0; i < DM_NUM_CHANNELS; i++) { + u64 base_val = (u64)CPHYSADDR(&page_descr[i]) | V_DM_DSCR_BASE_RINGSZ(1); + void *base_reg = (void *)IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE)); + + __raw_writeq(base_val, base_reg); + __raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg); + __raw_writeq(base_val | M_DM_DSCR_BASE_ENABL, base_reg); + } } void clear_page(void *page) { - int cpu = smp_processor_id(); + u64 to_phys = (u64)CPHYSADDR(page); + unsigned int cpu = smp_processor_id(); - /* if the page is above Kseg0, use old way */ + /* if the page is not in KSEG0, use old way */ if ((long)KSEGX(page) != (long)CKSEG0) return clear_page_cpu(page); - page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; + page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); @@ -239,32 +241,32 @@ void clear_page(void *page) * reliable way to delay completion detection. */ while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG))) - M_DM_DSCR_BASE_INTERRUPT))) + & M_DM_DSCR_BASE_INTERRUPT)) ; __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); } void copy_page(void *to, void *from) { - unsigned long from_phys = CPHYSADDR(from); - unsigned long to_phys = CPHYSADDR(to); - int cpu = smp_processor_id(); + u64 from_phys = (u64)CPHYSADDR(from); + u64 to_phys = (u64)CPHYSADDR(to); + unsigned int cpu = smp_processor_id(); - /* if either page is above Kseg0, use old way */ + /* if any page is not in KSEG0, use old way */ if ((long)KSEGX(to) != (long)CKSEG0 || (long)KSEGX(from) != (long)CKSEG0) return copy_page_cpu(to, from); - page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; - page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); - __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); + page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; + page_descr[cpu].dscr_b = from_phys | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); + __raw_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); /* * Don't really want to do it this way, but there's no * reliable way to delay completion detection. */ - while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG)) & - M_DM_DSCR_BASE_INTERRUPT))) + while (!(__raw_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG))) + & M_DM_DSCR_BASE_INTERRUPT)) ; __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); } -- GitLab From 13d1d73ea57e7e012bc131ce0f945231087e8c8b Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Sun, 27 Feb 2005 22:15:24 +0000 Subject: [PATCH 0951/1519] Comment correction after further investigation of issue. Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-au1000.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c index c1c91ca0f9c2..74d91054db09 100644 --- a/arch/mips/pci/ops-au1000.c +++ b/arch/mips/pci/ops-au1000.c @@ -128,9 +128,8 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, last_entryLo0 = last_entryLo1 = 0xffffffff; } - /* Since the Au1xxx doesn't do the idsel timing exactly to spec, - * many board vendors implement their own off-chip idsel, so call - * it now. If it doesn't succeed, may as well bail out at this point. + /* Allow board vendors to implement their own off-chip idsel. + * If it doesn't succeed, may as well bail out at this point. */ if (board_pci_idsel) { if (board_pci_idsel(device, 1) == 0) { -- GitLab From d437441ef5336874e934bd53a03159a584efe95a Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Mon, 28 Feb 2005 05:15:40 +0000 Subject: [PATCH 0952/1519] No barrier needed on au1x. Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-au1000.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c index 74d91054db09..be1420126c42 100644 --- a/arch/mips/pci/ops-au1000.c +++ b/arch/mips/pci/ops-au1000.c @@ -50,11 +50,6 @@ int (*board_pci_idsel)(unsigned int devsel, int assert); -/* CP0 hazard avoidance. */ -#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ - "nop; nop; nop; nop;\t" \ - ".set reorder\n\t") - void mod_wired_entry(int entry, unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask) @@ -66,16 +61,12 @@ void mod_wired_entry(int entry, unsigned long entrylo0, old_ctx = read_c0_entryhi() & 0xff; old_pagemask = read_c0_pagemask(); write_c0_index(entry); - BARRIER; write_c0_pagemask(pagemask); write_c0_entryhi(entryhi); write_c0_entrylo0(entrylo0); write_c0_entrylo1(entrylo1); - BARRIER; tlb_write_indexed(); - BARRIER; write_c0_entryhi(old_ctx); - BARRIER; write_c0_pagemask(old_pagemask); } -- GitLab From 8ab00b9a02c55fd6263c5f7c0dc88389d94de327 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 28 Feb 2005 13:39:57 +0000 Subject: [PATCH 0953/1519] Convert struct hw_interrupt_type initializations to ISO C99 named initializers. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/irq.c | 60 +++++++++----------- arch/mips/ddb5xxx/ddb5074/nile4_pic.c | 15 +++-- arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c | 15 +++-- arch/mips/ddb5xxx/ddb5477/irq_5477.c | 15 +++-- arch/mips/ite-boards/generic/irq.c | 29 +++++----- arch/mips/jazz/irq.c | 15 +++-- arch/mips/jmr3927/rbhma3100/irq.c | 14 ++--- arch/mips/kernel/i8259.c | 15 +++-- arch/mips/kernel/irq-msc01.c | 30 +++++----- arch/mips/kernel/irq-mv6434x.c | 15 +++-- arch/mips/kernel/irq-rm7000.c | 14 ++--- arch/mips/kernel/irq-rm9000.c | 28 ++++----- arch/mips/kernel/irq_cpu.c | 15 +++-- arch/mips/lasat/interrupt.c | 15 +++-- arch/mips/mips-boards/atlas/atlas_int.c | 15 +++-- arch/mips/momentum/ocelot_c/cpci-irq.c | 15 +++-- arch/mips/momentum/ocelot_c/uart-irq.c | 15 +++-- arch/mips/sgi-ip32/ip32-irq.c | 75 ++++++++++++------------- arch/mips/sibyte/sb1250/irq.c | 18 +++--- arch/mips/sni/irq.c | 15 +++-- 20 files changed, 211 insertions(+), 237 deletions(-) diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index d1eb5a4a9a19..0b912f739feb 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -253,47 +253,43 @@ void restore_local_and_enable(int controller, unsigned long mask) static struct hw_interrupt_type rise_edge_irq_type = { - "Au1000 Rise Edge", - startup_irq, - shutdown_irq, - local_enable_irq, - local_disable_irq, - mask_and_ack_rise_edge_irq, - end_irq, - NULL + .typename = "Au1000 Rise Edge", + .startup = startup_irq, + .shutdown = shutdown_irq, + .enable = local_enable_irq, + .disable = local_disable_irq, + .ack = mask_and_ack_rise_edge_irq, + .end = end_irq, }; static struct hw_interrupt_type fall_edge_irq_type = { - "Au1000 Fall Edge", - startup_irq, - shutdown_irq, - local_enable_irq, - local_disable_irq, - mask_and_ack_fall_edge_irq, - end_irq, - NULL + .typename = "Au1000 Fall Edge", + .startup = startup_irq, + .shutdown = shutdown_irq, + .enable = local_enable_irq, + .disable = local_disable_irq, + .ack = mask_and_ack_fall_edge_irq, + .end = end_irq, }; static struct hw_interrupt_type either_edge_irq_type = { - "Au1000 Rise or Fall Edge", - startup_irq, - shutdown_irq, - local_enable_irq, - local_disable_irq, - mask_and_ack_either_edge_irq, - end_irq, - NULL + .typename = "Au1000 Rise or Fall Edge", + .startup = startup_irq, + .shutdown = shutdown_irq, + .enable = local_enable_irq, + .disable = local_disable_irq, + .ack = mask_and_ack_either_edge_irq, + .end = end_irq, }; static struct hw_interrupt_type level_irq_type = { - "Au1000 Level", - startup_irq, - shutdown_irq, - local_enable_irq, - local_disable_irq, - mask_and_ack_level_irq, - end_irq, - NULL + .typename = "Au1000 Level", + .startup = startup_irq, + .shutdown = shutdown_irq, + .enable = local_enable_irq, + .disable = local_disable_irq, + .ack = mask_and_ack_level_irq, + .end = end_irq, }; #ifdef CONFIG_PM diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c index 68c127cd70c9..8743ffce8653 100644 --- a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c +++ b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c @@ -209,14 +209,13 @@ static void nile4_irq_end(unsigned int irq) { #define nile4_irq_shutdown nile4_disable_irq static hw_irq_controller nile4_irq_controller = { - "nile4", - nile4_irq_startup, - nile4_irq_shutdown, - nile4_enable_irq, - nile4_disable_irq, - nile4_ack_irq, - nile4_irq_end, - NULL + .typename = "nile4", + .startup = nile4_irq_startup, + .shutdown = nile4_irq_shutdown, + .enable = nile4_enable_irq, + .disable = nile4_disable_irq, + .ack = nile4_ack_irq, + .end = nile4_irq_end, }; void nile4_irq_setup(u32 base) { diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c index a77682be01ac..f66fe5b58636 100644 --- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c +++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c @@ -53,14 +53,13 @@ static void vrc5476_irq_end(uint irq) } static hw_irq_controller vrc5476_irq_controller = { - "vrc5476", - vrc5476_irq_startup, - vrc5476_irq_shutdown, - vrc5476_irq_enable, - vrc5476_irq_disable, - vrc5476_irq_ack, - vrc5476_irq_end, - NULL /* no affinity stuff for UP */ + .typename = "vrc5476", + .startup = vrc5476_irq_startup, + .shutdown = vrc5476_irq_shutdown, + .enable = vrc5476_irq_enable, + .disable = vrc5476_irq_disable, + .ack = vrc5476_irq_ack, + .end = vrc5476_irq_end }; void __init diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c index 0d5e706207ec..5fcd5f070cdc 100644 --- a/arch/mips/ddb5xxx/ddb5477/irq_5477.c +++ b/arch/mips/ddb5xxx/ddb5477/irq_5477.c @@ -90,14 +90,13 @@ vrc5477_irq_end(unsigned int irq) } hw_irq_controller vrc5477_irq_controller = { - "vrc5477_irq", - vrc5477_irq_startup, - vrc5477_irq_shutdown, - vrc5477_irq_enable, - vrc5477_irq_disable, - vrc5477_irq_ack, - vrc5477_irq_end, - NULL /* no affinity stuff for UP */ + .typename = "vrc5477_irq", + .startup = vrc5477_irq_startup, + .shutdown = vrc5477_irq_shutdown, + .enable = vrc5477_irq_enable, + .disable = vrc5477_irq_disable, + .ack = vrc5477_irq_ack, + .end = vrc5477_irq_end }; void __init vrc5477_irq_init(u32 irq_base) diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c index cb71b9024d6f..16014e6ebf50 100644 --- a/arch/mips/ite-boards/generic/irq.c +++ b/arch/mips/ite-boards/generic/irq.c @@ -138,14 +138,13 @@ static void end_ite_irq(unsigned int irq) } static struct hw_interrupt_type it8172_irq_type = { - "ITE8172", - startup_ite_irq, - shutdown_ite_irq, - enable_it8172_irq, - disable_it8172_irq, - mask_and_ack_ite_irq, - end_ite_irq, - NULL + .typename = "ITE8172", + .startup = startup_ite_irq, + .shutdown = shutdown_ite_irq, + .enable = enable_it8172_irq, + .disable = disable_it8172_irq, + .ack = mask_and_ack_ite_irq, + .end = end_ite_irq, }; @@ -159,13 +158,13 @@ static void ack_none(unsigned int irq) { } #define end_none enable_none static struct hw_interrupt_type cp0_irq_type = { - "CP0 Count", - startup_none, - shutdown_none, - enable_none, - disable_none, - ack_none, - end_none + .typename = "CP0 Count", + .startup = startup_none, + .shutdown = shutdown_none, + .enable = enable_none, + .disable = disable_none, + .ack = ack_none, + .end = end_none }; void enable_cpu_timer(void) diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index 0b608fa98d5a..b309b1bcf2e8 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -58,14 +58,13 @@ static void end_r4030_irq(unsigned int irq) } static struct hw_interrupt_type r4030_irq_type = { - "R4030", - startup_r4030_irq, - shutdown_r4030_irq, - enable_r4030_irq, - disable_r4030_irq, - mask_and_ack_r4030_irq, - end_r4030_irq, - NULL + .typename = "R4030", + .startup = startup_r4030_irq, + .shutdown = shutdown_r4030_irq, + .enable = enable_r4030_irq, + .disable = disable_r4030_irq, + .ack = mask_and_ack_r4030_irq, + .end = end_r4030_irq, }; void __init init_r4030_ints(void) diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c index b9799b86fc79..7cbe14483f13 100644 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ b/arch/mips/jmr3927/rbhma3100/irq.c @@ -412,13 +412,13 @@ void __init arch_init_irq(void) } static hw_irq_controller jmr3927_irq_controller = { - "jmr3927_irq", - jmr3927_irq_startup, - jmr3927_irq_shutdown, - jmr3927_irq_enable, - jmr3927_irq_disable, - jmr3927_irq_ack, - jmr3927_irq_end, + .typename = "jmr3927_irq", + .startup = jmr3927_irq_startup, + .shutdown = jmr3927_irq_shutdown, + .enable = jmr3927_irq_enable, + .disable = jmr3927_irq_disable, + .ack = jmr3927_irq_ack, + .end = jmr3927_irq_end, }; void jmr3927_irq_init(u32 irq_base) diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 447759201d1d..bb31370cd390 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -52,14 +52,13 @@ static unsigned int startup_8259A_irq(unsigned int irq) } static struct hw_interrupt_type i8259A_irq_type = { - "XT-PIC", - startup_8259A_irq, - shutdown_8259A_irq, - enable_8259A_irq, - disable_8259A_irq, - mask_and_ack_8259A, - end_8259A_irq, - NULL + .typename = "XT-PIC", + .startup = startup_8259A_irq, + .shutdown = shutdown_8259A_irq, + .enable = enable_8259A_irq, + .disable = disable_8259A_irq, + .ack = mask_and_ack_8259A, + .end = end_8259A_irq, }; /* diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index 43c00ac0b88d..bf759e33c5ef 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -129,25 +129,23 @@ msc_bind_eic_interrupt (unsigned int irq, unsigned int set) #define shutdown_msc_irq disable_msc_irq struct hw_interrupt_type msc_levelirq_type = { - "SOC-it-Level", - startup_msc_irq, - shutdown_msc_irq, - enable_msc_irq, - disable_msc_irq, - level_mask_and_ack_msc_irq, - end_msc_irq, - NULL + .typename = "SOC-it-Level", + .startup = startup_msc_irq, + .shutdown = shutdown_msc_irq, + .enable = enable_msc_irq, + .disable = disable_msc_irq, + .ack = level_mask_and_ack_msc_irq, + .end = end_msc_irq, }; struct hw_interrupt_type msc_edgeirq_type = { - "SOC-it-Edge", - startup_msc_irq, - shutdown_msc_irq, - enable_msc_irq, - disable_msc_irq, - edge_mask_and_ack_msc_irq, - end_msc_irq, - NULL + .typename = "SOC-it-Edge", + .startup =startup_msc_irq, + .shutdown = shutdown_msc_irq, + .enable = enable_msc_irq, + .disable = disable_msc_irq, + .ack = edge_mask_and_ack_msc_irq, + .end = end_msc_irq, }; diff --git a/arch/mips/kernel/irq-mv6434x.c b/arch/mips/kernel/irq-mv6434x.c index 088bbbc869e6..0ac067f45cf5 100644 --- a/arch/mips/kernel/irq-mv6434x.c +++ b/arch/mips/kernel/irq-mv6434x.c @@ -135,14 +135,13 @@ void ll_mv64340_irq(struct pt_regs *regs) #define shutdown_mv64340_irq disable_mv64340_irq struct hw_interrupt_type mv64340_irq_type = { - "MV-64340", - startup_mv64340_irq, - shutdown_mv64340_irq, - enable_mv64340_irq, - disable_mv64340_irq, - mask_and_ack_mv64340_irq, - end_mv64340_irq, - NULL + .typename = "MV-64340", + .startup = startup_mv64340_irq, + .shutdown = shutdown_mv64340_irq, + .enable = enable_mv64340_irq, + .disable = disable_mv64340_irq, + .ack = mask_and_ack_mv64340_irq, + .end = end_mv64340_irq, }; void __init mv64340_irq_init(unsigned int base) diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c index f5d779fd0355..0b130c5ac5d9 100644 --- a/arch/mips/kernel/irq-rm7000.c +++ b/arch/mips/kernel/irq-rm7000.c @@ -72,13 +72,13 @@ static void rm7k_cpu_irq_end(unsigned int irq) } static hw_irq_controller rm7k_irq_controller = { - "RM7000", - rm7k_cpu_irq_startup, - rm7k_cpu_irq_shutdown, - rm7k_cpu_irq_enable, - rm7k_cpu_irq_disable, - rm7k_cpu_irq_ack, - rm7k_cpu_irq_end, + .typename = "RM7000", + .startup = rm7k_cpu_irq_startup, + .shutdown = rm7k_cpu_irq_shutdown, + .enable = rm7k_cpu_irq_enable, + .disable = rm7k_cpu_irq_disable, + .ack = rm7k_cpu_irq_ack, + .end = rm7k_cpu_irq_end, }; void __init rm7k_cpu_irq_init(int base) diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c index bdd130296256..9b5f20c32acb 100644 --- a/arch/mips/kernel/irq-rm9000.c +++ b/arch/mips/kernel/irq-rm9000.c @@ -106,23 +106,23 @@ static void rm9k_cpu_irq_end(unsigned int irq) } static hw_irq_controller rm9k_irq_controller = { - "RM9000", - rm9k_cpu_irq_startup, - rm9k_cpu_irq_shutdown, - rm9k_cpu_irq_enable, - rm9k_cpu_irq_disable, - rm9k_cpu_irq_ack, - rm9k_cpu_irq_end, + .typename = "RM9000", + .startup = rm9k_cpu_irq_startup, + .shutdown = rm9k_cpu_irq_shutdown, + .enable = rm9k_cpu_irq_enable, + .disable = rm9k_cpu_irq_disable, + .ack = rm9k_cpu_irq_ack, + .end = rm9k_cpu_irq_end, }; static hw_irq_controller rm9k_perfcounter_irq = { - "RM9000", - rm9k_perfcounter_irq_startup, - rm9k_perfcounter_irq_shutdown, - rm9k_cpu_irq_enable, - rm9k_cpu_irq_disable, - rm9k_cpu_irq_ack, - rm9k_cpu_irq_end, + .typename = "RM9000", + .startup = rm9k_perfcounter_irq_startup, + .shutdown = rm9k_perfcounter_irq_shutdown, + .enable = rm9k_cpu_irq_enable, + .disable = rm9k_cpu_irq_disable, + .ack = rm9k_cpu_irq_ack, + .end = rm9k_cpu_irq_end, }; unsigned int rm9000_perfcount_irq; diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 8f8c15fa748d..905ff843a68f 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -93,14 +93,13 @@ static void mips_cpu_irq_end(unsigned int irq) } static hw_irq_controller mips_cpu_irq_controller = { - "MIPS", - mips_cpu_irq_startup, - mips_cpu_irq_shutdown, - mips_cpu_irq_enable, - mips_cpu_irq_disable, - mips_cpu_irq_ack, - mips_cpu_irq_end, - NULL /* no affinity stuff for UP */ + .typename = "MIPS", + .startup = mips_cpu_irq_startup, + .shutdown = mips_cpu_irq_shutdown, + .enable = mips_cpu_irq_enable, + .disable = mips_cpu_irq_disable, + .ack = mips_cpu_irq_ack, + .end = mips_cpu_irq_end, }; diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index c90da1639440..852a41901a5e 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -71,14 +71,13 @@ static void end_lasat_irq(unsigned int irq) } static struct hw_interrupt_type lasat_irq_type = { - "Lasat", - startup_lasat_irq, - shutdown_lasat_irq, - enable_lasat_irq, - disable_lasat_irq, - mask_and_ack_lasat_irq, - end_lasat_irq, - NULL + .typename = "Lasat", + .startup = startup_lasat_irq, + .shutdown = shutdown_lasat_irq, + .enable = enable_lasat_irq, + .disable = disable_lasat_irq, + .ack = mask_and_ack_lasat_irq, + .end = end_lasat_irq, }; static inline int ls1bit32(unsigned int x) diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c index 19d4b0792460..bc0ebc69bfb3 100644 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ b/arch/mips/mips-boards/atlas/atlas_int.c @@ -76,14 +76,13 @@ static void end_atlas_irq(unsigned int irq) } static struct hw_interrupt_type atlas_irq_type = { - "Atlas", - startup_atlas_irq, - shutdown_atlas_irq, - enable_atlas_irq, - disable_atlas_irq, - mask_and_ack_atlas_irq, - end_atlas_irq, - NULL + .typename = "Atlas", + .startup = startup_atlas_irq, + .shutdown = shutdown_atlas_irq, + .enable = enable_atlas_irq, + .disable = disable_atlas_irq, + .ack = mask_and_ack_atlas_irq, + .end = end_atlas_irq, }; static inline int ls1bit32(unsigned int x) diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c index dea48b3ad687..bd885785e2f9 100644 --- a/arch/mips/momentum/ocelot_c/cpci-irq.c +++ b/arch/mips/momentum/ocelot_c/cpci-irq.c @@ -129,14 +129,13 @@ void ll_cpci_irq(struct pt_regs *regs) #define shutdown_cpci_irq disable_cpci_irq struct hw_interrupt_type cpci_irq_type = { - "CPCI/FPGA", - startup_cpci_irq, - shutdown_cpci_irq, - enable_cpci_irq, - disable_cpci_irq, - mask_and_ack_cpci_irq, - end_cpci_irq, - NULL + .typename = "CPCI/FPGA", + .startup = startup_cpci_irq, + .shutdown = shutdown_cpci_irq, + .enable = enable_cpci_irq, + .disable = disable_cpci_irq, + .ack = mask_and_ack_cpci_irq, + .end = end_cpci_irq, }; void cpci_irq_init(void) diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c index ebe1507b17df..755bde5146be 100644 --- a/arch/mips/momentum/ocelot_c/uart-irq.c +++ b/arch/mips/momentum/ocelot_c/uart-irq.c @@ -122,14 +122,13 @@ void ll_uart_irq(struct pt_regs *regs) #define shutdown_uart_irq disable_uart_irq struct hw_interrupt_type uart_irq_type = { - "UART/FPGA", - startup_uart_irq, - shutdown_uart_irq, - enable_uart_irq, - disable_uart_irq, - mask_and_ack_uart_irq, - end_uart_irq, - NULL + .typename = "UART/FPGA", + .startup = startup_uart_irq, + .shutdown = shutdown_uart_irq, + .enable = enable_uart_irq, + .disable = disable_uart_irq, + .ack = mask_and_ack_uart_irq, + .end = end_uart_irq, }; void uart_irq_init(void) diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index fc3a8e90d763..2eb22d692ed9 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -163,14 +163,13 @@ static void end_cpu_irq(unsigned int irq) #define mask_and_ack_cpu_irq disable_cpu_irq static struct hw_interrupt_type ip32_cpu_interrupt = { - "IP32 CPU", - startup_cpu_irq, - shutdown_cpu_irq, - enable_cpu_irq, - disable_cpu_irq, - mask_and_ack_cpu_irq, - end_cpu_irq, - NULL + .typename = "IP32 CPU", + .startup = startup_cpu_irq, + .shutdown = shutdown_cpu_irq, + .enable = enable_cpu_irq, + .disable = disable_cpu_irq, + .ack = mask_and_ack_cpu_irq, + .end = end_cpu_irq, }; /* @@ -234,14 +233,13 @@ static void end_crime_irq(unsigned int irq) #define shutdown_crime_irq disable_crime_irq static struct hw_interrupt_type ip32_crime_interrupt = { - "IP32 CRIME", - startup_crime_irq, - shutdown_crime_irq, - enable_crime_irq, - disable_crime_irq, - mask_and_ack_crime_irq, - end_crime_irq, - NULL + .typename = "IP32 CRIME", + .startup = startup_crime_irq, + .shutdown = shutdown_crime_irq, + .enable = enable_crime_irq, + .disable = disable_crime_irq, + .ack = mask_and_ack_crime_irq, + .end = end_crime_irq, }; /* @@ -294,14 +292,13 @@ static void end_macepci_irq(unsigned int irq) #define mask_and_ack_macepci_irq disable_macepci_irq static struct hw_interrupt_type ip32_macepci_interrupt = { - "IP32 MACE PCI", - startup_macepci_irq, - shutdown_macepci_irq, - enable_macepci_irq, - disable_macepci_irq, - mask_and_ack_macepci_irq, - end_macepci_irq, - NULL + .typename = "IP32 MACE PCI", + .startup = startup_macepci_irq, + .shutdown = shutdown_macepci_irq, + .enable = enable_macepci_irq, + .disable = disable_macepci_irq, + .ack = mask_and_ack_macepci_irq, + .end = end_macepci_irq, }; /* This is used for MACE ISA interrupts. That means bits 4-6 in the @@ -425,14 +422,13 @@ static void end_maceisa_irq(unsigned irq) #define shutdown_maceisa_irq disable_maceisa_irq static struct hw_interrupt_type ip32_maceisa_interrupt = { - "IP32 MACE ISA", - startup_maceisa_irq, - shutdown_maceisa_irq, - enable_maceisa_irq, - disable_maceisa_irq, - mask_and_ack_maceisa_irq, - end_maceisa_irq, - NULL + .typename = "IP32 MACE ISA", + .startup = startup_maceisa_irq, + .shutdown = shutdown_maceisa_irq, + .enable = enable_maceisa_irq, + .disable = disable_maceisa_irq, + .ack = mask_and_ack_maceisa_irq, + .end = end_maceisa_irq, }; /* This is used for regular non-ISA, non-PCI MACE interrupts. That means @@ -476,14 +472,13 @@ static void end_mace_irq(unsigned int irq) #define mask_and_ack_mace_irq disable_mace_irq static struct hw_interrupt_type ip32_mace_interrupt = { - "IP32 MACE", - startup_mace_irq, - shutdown_mace_irq, - enable_mace_irq, - disable_mace_irq, - mask_and_ack_mace_irq, - end_mace_irq, - NULL + .typename = "IP32 MACE", + .startup = startup_mace_irq, + .shutdown = shutdown_mace_irq, + .enable = enable_mace_irq, + .disable = disable_mace_irq, + .ack = mask_and_ack_mace_irq, + .end = end_mace_irq, }; static void ip32_unknown_interrupt(struct pt_regs *regs) diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index a62cba9f32ba..b9f1ff420fef 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -71,17 +71,15 @@ extern char sb1250_duart_present[]; #endif static struct hw_interrupt_type sb1250_irq_type = { - "SB1250-IMR", - startup_sb1250_irq, - shutdown_sb1250_irq, - enable_sb1250_irq, - disable_sb1250_irq, - ack_sb1250_irq, - end_sb1250_irq, + .typename = "SB1250-IMR", + .startup = startup_sb1250_irq, + .shutdown = shutdown_sb1250_irq, + .enable = enable_sb1250_irq, + .disable = disable_sb1250_irq, + .ack = ack_sb1250_irq, + .end = end_sb1250_irq, #ifdef CONFIG_SMP - sb1250_set_affinity -#else - NULL + .set_affinity = sb1250_set_affinity #endif }; diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index 141a310d74d8..952038aa4b90 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -58,14 +58,13 @@ static void end_pciasic_irq(unsigned int irq) } static struct hw_interrupt_type pciasic_irq_type = { - "ASIC-PCI", - startup_pciasic_irq, - shutdown_pciasic_irq, - enable_pciasic_irq, - disable_pciasic_irq, - mask_and_ack_pciasic_irq, - end_pciasic_irq, - NULL + .typename = "ASIC-PCI", + .startup = startup_pciasic_irq, + .shutdown = shutdown_pciasic_irq, + .enable = enable_pciasic_irq, + .disable = disable_pciasic_irq, + .ack = mask_and_ack_pciasic_irq, + .end = end_pciasic_irq, }; /* -- GitLab From 0bd5d2e9ec8cc04a0225c590d35dd097e6b3a3f6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 28 Feb 2005 17:29:15 +0000 Subject: [PATCH 0954/1519] Cleanup fpuemuprivate declarations. Signed-off-by: Ralf Baechle --- arch/mips/math-emu/dsemul.c | 3 --- arch/mips/math-emu/kernel_linkage.c | 2 -- include/asm-mips/fpu_emulator.h | 2 ++ 3 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index aa989c2246da..688be60c5385 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -28,9 +28,6 @@ #endif #define __mips 4 -extern struct mips_fpu_emulator_private fpuemuprivate; - - /* * Emulate the arbritrary instruction ir at xcp->cp0_epc. Required when * we have to emulate the instruction in a COP1 branch delay slot. Do diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c index 4002f0cf79f3..03d9a5560004 100644 --- a/arch/mips/math-emu/kernel_linkage.c +++ b/arch/mips/math-emu/kernel_linkage.c @@ -27,8 +27,6 @@ #include -extern struct mips_fpu_emulator_private fpuemuprivate; - #define SIGNALLING_NAN 0x7ff800007ff80000LL void fpu_emulator_init_fpu(void) diff --git a/include/asm-mips/fpu_emulator.h b/include/asm-mips/fpu_emulator.h index 46972ae2b95d..ea2fae10865f 100644 --- a/include/asm-mips/fpu_emulator.h +++ b/include/asm-mips/fpu_emulator.h @@ -35,4 +35,6 @@ struct mips_fpu_emulator_private { } stats; }; +extern struct mips_fpu_emulator_private fpuemuprivate; + #endif /* _ASM_FPU_EMULATOR_H */ -- GitLab From 333d1f6794b341df11f286f5dca123c6dc64a770 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 28 Feb 2005 17:55:57 +0000 Subject: [PATCH 0955/1519] Gross macro abuse. Get rid of gpreg_t, vaddr_t, REG_TO_VA and VA_TO_REG. Who ever wrote this apparently did enjoy the C Puzzle Book. ISBN 0201604612, a little old but still fun reading for the next blackout ;) Signed-off-by: Ralf Baechle --- arch/mips/math-emu/cp1emu.c | 48 ++++++++++++++++++------------------- arch/mips/math-emu/dsemul.c | 10 ++++---- arch/mips/math-emu/dsemul.h | 10 ++------ 3 files changed, 31 insertions(+), 37 deletions(-) diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 99c550632d44..c70f25f5889e 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -196,7 +196,7 @@ static int isBranchInstr(mips_instruction * i) static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) { mips_instruction ir; - vaddr_t emulpc, contpc; + void * emulpc, *contpc; unsigned int cond; if (get_user(ir, (mips_instruction *) xcp->cp0_epc)) { @@ -221,12 +221,12 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) * Linux MIPS branch emulator operates on context, updating the * cp0_epc. */ - emulpc = REG_TO_VA(xcp->cp0_epc + 4); /* Snapshot emulation target */ + emulpc = (void *) (xcp->cp0_epc + 4); /* Snapshot emulation target */ if (__compute_return_epc(xcp)) { #ifdef CP1DBG printk("failed to emulate branch at %p\n", - REG_TO_VA(xcp->cp0_epc)); + (void *) (xcp->cp0_epc)); #endif return SIGILL; } @@ -235,13 +235,12 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) return SIGBUS; } /* __compute_return_epc() will have updated cp0_epc */ - contpc = REG_TO_VA xcp->cp0_epc; + contpc = (void *) xcp->cp0_epc; /* In order not to confuse ptrace() et al, tweak context */ - xcp->cp0_epc = VA_TO_REG emulpc - 4; - } - else { - emulpc = REG_TO_VA xcp->cp0_epc; - contpc = REG_TO_VA(xcp->cp0_epc + 4); + xcp->cp0_epc = (unsigned long) emulpc - 4; + } else { + emulpc = (void *) xcp->cp0_epc; + contpc = (void *) (xcp->cp0_epc + 4); } emul: @@ -249,7 +248,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) switch (MIPSInst_OPCODE(ir)) { #ifndef SINGLE_ONLY_FPU case ldc1_op:{ - u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] + + u64 *va = (void *) (xcp->regs[MIPSInst_RS(ir)] + MIPSInst_SIMM(ir)); u64 val; @@ -263,7 +262,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) } case sdc1_op:{ - u64 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] + + u64 *va = (void *) (xcp->regs[MIPSInst_RS(ir)] + MIPSInst_SIMM(ir)); u64 val; @@ -278,7 +277,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) #endif case lwc1_op:{ - u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] + + u32 *va = (void *) (xcp->regs[MIPSInst_RS(ir)] + MIPSInst_SIMM(ir)); u32 val; @@ -298,7 +297,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) } case swc1_op:{ - u32 *va = REG_TO_VA(xcp->regs[MIPSInst_RS(ir)] + + u32 *va = (void *) (xcp->regs[MIPSInst_RS(ir)] + MIPSInst_SIMM(ir)); u32 val; @@ -371,7 +370,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) value = ctx->fcr31; #ifdef CSRTRACE printk("%p gpr[%d]<-csr=%08x\n", - REG_TO_VA(xcp->cp0_epc), + (void *) (xcp->cp0_epc), MIPSInst_RT(ir), value); #endif } @@ -398,7 +397,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) if (MIPSInst_RD(ir) == FPCREG_CSR) { #ifdef CSRTRACE printk("%p gpr[%d]->csr=%08x\n", - REG_TO_VA(xcp->cp0_epc), + (void *) (xcp->cp0_epc), MIPSInst_RT(ir), value); #endif ctx->fcr31 = value; @@ -445,12 +444,12 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) * instruction */ xcp->cp0_epc += 4; - contpc = REG_TO_VA + contpc = (void *) (xcp->cp0_epc + (MIPSInst_SIMM(ir) << 2)); if (get_user(ir, (mips_instruction *) - REG_TO_VA xcp->cp0_epc)) { + (void *) xcp->cp0_epc)) { fpuemuprivate.stats.errors++; return SIGBUS; } @@ -480,7 +479,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) * Single step the non-cp1 * instruction in the dslot */ - return mips_dsemul(xcp, ir, VA_TO_REG contpc); + return mips_dsemul(xcp, ir, (unsigned long) contpc); } else { /* branch not taken */ @@ -539,8 +538,9 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) } /* we did it !! */ - xcp->cp0_epc = VA_TO_REG(contpc); + xcp->cp0_epc = (unsigned long) contpc; xcp->cp0_cause &= ~CAUSEF_BD; + return 0; } @@ -628,7 +628,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, switch (MIPSInst_FUNC(ir)) { case lwxc1_op: - va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] + + va = (void *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); fpuemuprivate.stats.loads++; @@ -648,7 +648,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, break; case swxc1_op: - va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] + + va = (void *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); fpuemuprivate.stats.stores++; @@ -724,7 +724,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, switch (MIPSInst_FUNC(ir)) { case ldxc1_op: - va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] + + va = (void *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); fpuemuprivate.stats.loads++; @@ -736,7 +736,7 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, break; case sdxc1_op: - va = REG_TO_VA(xcp->regs[MIPSInst_FR(ir)] + + va = (void *) (xcp->regs[MIPSInst_FR(ir)] + xcp->regs[MIPSInst_FT(ir)]); fpuemuprivate.stats.stores++; @@ -1282,7 +1282,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx, int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp, struct mips_fpu_soft_struct *ctx) { - gpreg_t oldepc, prevepc; + unsigned long oldepc, prevepc; mips_instruction insn; int sig = 0; diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c index 688be60c5385..d48bb62495bf 100644 --- a/arch/mips/math-emu/dsemul.c +++ b/arch/mips/math-emu/dsemul.c @@ -49,10 +49,10 @@ struct emuframe { mips_instruction emul; mips_instruction badinst; mips_instruction cookie; - gpreg_t epc; + unsigned long epc; }; -int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc) +int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc) { extern asmlinkage void handle_dsemulret(void); mips_instruction *dsemul_insns; @@ -88,7 +88,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc) */ /* Ensure that the two instructions are in the same cache line */ - dsemul_insns = (mips_instruction *) REG_TO_VA ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7); + dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7); fr = (struct emuframe *) dsemul_insns; /* Verify that the stack pointer is not competely insane */ @@ -105,7 +105,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc) return SIGBUS; } - regs->cp0_epc = VA_TO_REG & fr->emul; + regs->cp0_epc = (unsigned long) &fr->emul; flush_cache_sigtramp((unsigned long)&fr->badinst); @@ -115,7 +115,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc) int do_dsemulret(struct pt_regs *xcp) { struct emuframe *fr; - gpreg_t epc; + unsigned long epc; u32 insn, cookie; int err = 0; diff --git a/arch/mips/math-emu/dsemul.h b/arch/mips/math-emu/dsemul.h index dbd85f95268d..091f0e76730f 100644 --- a/arch/mips/math-emu/dsemul.h +++ b/arch/mips/math-emu/dsemul.h @@ -1,11 +1,5 @@ -typedef long gpreg_t; -typedef void *vaddr_t; - -#define REG_TO_VA (vaddr_t) -#define VA_TO_REG (gpreg_t) - -int mips_dsemul(struct pt_regs *regs, mips_instruction ir, gpreg_t cpc); -int do_dsemulret(struct pt_regs *xcp); +extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc); +extern int do_dsemulret(struct pt_regs *xcp); /* Instruction which will always cause an address error */ #define AdELOAD 0x8c000001 /* lw $0,1($0) */ -- GitLab From 784f7b9d895893c6aa3ca471c1344a62fc29c285 Mon Sep 17 00:00:00 2001 From: "Steven J. Hill" Date: Tue, 1 Mar 2005 03:51:33 +0000 Subject: [PATCH 0956/1519] Fix 'prctl' system call for IRIX. At this point IRIX 5.3 static binaries are now working for 80% of the ones I have tried. The other ones that do not work all fail in the same way with the same messages. Once that bug is tracked down, we should be in good shape. Task locking still needs some work. Signed-off-by: Ralf Baechle --- arch/mips/kernel/sysirix.c | 60 +++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 33 deletions(-) diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index 7ae4af476974..ed7c0e3c2f85 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -73,32 +73,30 @@ asmlinkage int irix_sysmp(struct pt_regs *regs) } /* The prctl commands. */ -#define PR_MAXPROCS 1 /* Tasks/user. */ -#define PR_ISBLOCKED 2 /* If blocked, return 1. */ -#define PR_SETSTACKSIZE 3 /* Set largest task stack size. */ -#define PR_GETSTACKSIZE 4 /* Get largest task stack size. */ -#define PR_MAXPPROCS 5 /* Num parallel tasks. */ -#define PR_UNBLKONEXEC 6 /* When task exec/exit's, unblock. */ -#define PR_SETEXITSIG 8 /* When task exit's, set signal. */ -#define PR_RESIDENT 9 /* Make task unswappable. */ -#define PR_ATTACHADDR 10 /* (Re-)Connect a vma to a task. */ -#define PR_DETACHADDR 11 /* Disconnect a vma from a task. */ -#define PR_TERMCHILD 12 /* When parent sleeps with fishes, kill child. */ -#define PR_GETSHMASK 13 /* Get the sproc() share mask. */ -#define PR_GETNSHARE 14 /* Number of share group members. */ -#define PR_COREPID 15 /* Add task pid to name when it core. */ -#define PR_ATTACHADDRPERM 16 /* (Re-)Connect vma, with specified prot. */ -#define PR_PTHREADEXIT 17 /* Kill a pthread without prejudice. */ - -asmlinkage int irix_prctl(struct pt_regs *regs) -{ - unsigned long cmd; - int error = 0, base = 0; +#define PR_MAXPROCS 1 /* Tasks/user. */ +#define PR_ISBLOCKED 2 /* If blocked, return 1. */ +#define PR_SETSTACKSIZE 3 /* Set largest task stack size. */ +#define PR_GETSTACKSIZE 4 /* Get largest task stack size. */ +#define PR_MAXPPROCS 5 /* Num parallel tasks. */ +#define PR_UNBLKONEXEC 6 /* When task exec/exit's, unblock. */ +#define PR_SETEXITSIG 8 /* When task exit's, set signal. */ +#define PR_RESIDENT 9 /* Make task unswappable. */ +#define PR_ATTACHADDR 10 /* (Re-)Connect a vma to a task. */ +#define PR_DETACHADDR 11 /* Disconnect a vma from a task. */ +#define PR_TERMCHILD 12 /* Kill child if the parent dies. */ +#define PR_GETSHMASK 13 /* Get the sproc() share mask. */ +#define PR_GETNSHARE 14 /* Number of share group members. */ +#define PR_COREPID 15 /* Add task pid to name when it core. */ +#define PR_ATTACHADDRPERM 16 /* (Re-)Connect vma, with specified prot. */ +#define PR_PTHREADEXIT 17 /* Kill a pthread, only for IRIX 6.[234] */ + +asmlinkage int irix_prctl(unsigned option, ...) +{ + va_list args; + int error = 0; - if (regs->regs[2] == 1000) - base = 1; - cmd = regs->regs[base + 4]; - switch (cmd) { + va_start(args, option); + switch (option) { case PR_MAXPROCS: printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n", current->comm, current->pid); @@ -111,7 +109,7 @@ asmlinkage int irix_prctl(struct pt_regs *regs) printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n", current->comm, current->pid); read_lock(&tasklist_lock); - task = find_task_by_pid(regs->regs[base + 5]); + task = find_task_by_pid(va_arg(args, pid_t)); error = -ESRCH; if (error) error = (task->run_list.next != NULL); @@ -121,7 +119,7 @@ asmlinkage int irix_prctl(struct pt_regs *regs) } case PR_SETSTACKSIZE: { - long value = regs->regs[base + 5]; + long value = va_arg(args, long); printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n", current->comm, current->pid, (unsigned long) value); @@ -222,17 +220,13 @@ asmlinkage int irix_prctl(struct pt_regs *regs) error = -EINVAL; break; - case PR_PTHREADEXIT: - printk("irix_prctl[%s:%d]: Wants PR_PTHREADEXIT\n", - current->comm, current->pid); - do_exit(regs->regs[base + 5]); - default: printk("irix_prctl[%s:%d]: Non-existant opcode %d\n", - current->comm, current->pid, (int)cmd); + current->comm, current->pid, option); error = -EINVAL; break; } + va_end(args); return error; } -- GitLab From e3ad1c23ba72214669b364c6fa304531dc768c3e Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Tue, 1 Mar 2005 06:33:16 +0000 Subject: [PATCH 0957/1519] Base Au1200 2.6 support. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 18 + arch/mips/Makefile | 14 + arch/mips/au1000/common/au1xxx_irqmap.c | 32 +- arch/mips/au1000/common/cputable.c | 3 +- arch/mips/au1000/common/dbdma.c | 298 ++++++++--- arch/mips/au1000/common/irq.c | 4 +- arch/mips/au1000/common/usbdev.c | 12 +- arch/mips/au1000/pb1200/Makefile | 5 + arch/mips/au1000/pb1200/board_setup.c | 187 +++++++ arch/mips/au1000/pb1200/init.c | 69 +++ arch/mips/au1000/pb1200/irqmap.c | 180 +++++++ arch/mips/kernel/cpu-probe.c | 5 + arch/mips/kernel/proc.c | 3 + arch/mips/mm/c-r4k.c | 4 + arch/mips/mm/tlbex.c | 1 + include/asm-mips/bootinfo.h | 2 + include/asm-mips/cpu.h | 3 +- include/asm-mips/mach-au1x00/au1000.h | 556 +++++++++++++++++--- include/asm-mips/mach-au1x00/au1xxx_dbdma.h | 124 ++++- include/asm-mips/mach-db1x00/db1200.h | 214 ++++++++ include/asm-mips/mach-pb1x00/pb1200.h | 244 +++++++++ 21 files changed, 1796 insertions(+), 182 deletions(-) create mode 100644 arch/mips/au1000/pb1200/Makefile create mode 100644 arch/mips/au1000/pb1200/board_setup.c create mode 100644 arch/mips/au1000/pb1200/init.c create mode 100644 arch/mips/au1000/pb1200/irqmap.c create mode 100644 include/asm-mips/mach-db1x00/db1200.h create mode 100644 include/asm-mips/mach-pb1x00/pb1200.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2edbef5f3551..455de42db7c9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -642,6 +642,10 @@ config SGI_IP32 help If you want this kernel to run on SGI O2 workstation, say Y here. +config SOC_AU1200 + bool + select SOC_AU1X00 + config SOC_AU1X00 bool "Support for AMD/Alchemy Au1X00 SOCs" select SYS_SUPPORTS_32BIT_KERNEL @@ -702,6 +706,13 @@ config MIPS_PB1550 select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE +config MIPS_PB1200 + bool "AMD Alchemy PB1200 board" + select SOC_AU1200 + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + config MIPS_DB1000 bool "DB1000 board" depends on SOC_AU1000 @@ -732,6 +743,13 @@ config MIPS_BOSPORUS depends on SOC_AU1500 select DMA_NONCOHERENT +config MIPS_DB1200 + bool "AMD Alchemy DB1200 board" + select SOC_AU1200 + select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + config MIPS_MIRAGE bool "Mirage board" depends on SOC_AU1500 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 5f2dfcddb9f2..99da8a2850c7 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -265,6 +265,13 @@ libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/ cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00 load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 +# +# AMD Alchemy Pb1200 eval board +# +libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/ +cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00 +load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 + # # AMD Alchemy Db1000 eval board # @@ -293,6 +300,13 @@ libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/ cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 +# +# AMD Alchemy Db1200 eval board +# +libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/ +cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00 +load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 + # # AMD Alchemy Bosporus eval board # diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c index 8a0f39f67c59..0b2c03c52319 100644 --- a/arch/mips/au1000/common/au1xxx_irqmap.c +++ b/arch/mips/au1000/common/au1xxx_irqmap.c @@ -173,14 +173,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = { { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0}, { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0}, { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0}, { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, @@ -201,14 +201,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = { { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0}, { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0}, { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0}, { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0}, diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c index f5521dfccfd6..4dbde82c8215 100644 --- a/arch/mips/au1000/common/cputable.c +++ b/arch/mips/au1000/common/cputable.c @@ -37,7 +37,8 @@ struct cpu_spec cpu_specs[] = { { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 }, { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 }, { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 }, - { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 }, + { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 }, + { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 }, { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 }, }; diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index adfc3172aace..cf10dc246f82 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -29,6 +29,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. * */ + #include #include #include @@ -42,6 +43,8 @@ #include #include +/* #include */ + #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) /* @@ -55,43 +58,16 @@ * functions. The drivers allocate the data buffers and assign them * to the descriptors. */ -static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); +static spinlock_t au1xxx_dbdma_spin_lock = SPIN_LOCK_UNLOCKED; /* I couldn't find a macro that did this...... */ #define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) -static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; -static int dbdma_initialized; +static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; +static int dbdma_initialized=0; static void au1xxx_dbdma_init(void); -typedef struct dbdma_device_table { - u32 dev_id; - u32 dev_flags; - u32 dev_tsize; - u32 dev_devwidth; - u32 dev_physaddr; /* If FIFO */ - u32 dev_intlevel; - u32 dev_intpolarity; -} dbdev_tab_t; - -typedef struct dbdma_chan_config { - u32 chan_flags; - u32 chan_index; - dbdev_tab_t *chan_src; - dbdev_tab_t *chan_dest; - au1x_dma_chan_t *chan_ptr; - au1x_ddma_desc_t *chan_desc_base; - au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; - void *chan_callparam; - void (*chan_callback)(int, void *, struct pt_regs *); -} chan_tab_t; - -#define DEV_FLAGS_INUSE (1 << 0) -#define DEV_FLAGS_ANYUSE (1 << 1) -#define DEV_FLAGS_OUT (1 << 2) -#define DEV_FLAGS_IN (1 << 3) - static dbdev_tab_t dbdev_tab[] = { #ifdef CONFIG_SOC_AU1550 /* UARTS */ @@ -157,13 +133,13 @@ static dbdev_tab_t dbdev_tab[] = { { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, + { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, - { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, @@ -173,9 +149,9 @@ static dbdev_tab_t dbdev_tab[] = { { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, + { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, + { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, @@ -184,6 +160,24 @@ static dbdev_tab_t dbdev_tab[] = { { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + /* Provide 16 user definable device types */ + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, }; #define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t)) @@ -203,6 +197,30 @@ find_dbdev_id (u32 id) return NULL; } +u32 +au1xxx_ddma_add_device(dbdev_tab_t *dev) +{ + u32 ret = 0; + dbdev_tab_t *p=NULL; + static u16 new_id=0x1000; + + p = find_dbdev_id(0); + if ( NULL != p ) + { + memcpy(p, dev, sizeof(dbdev_tab_t)); + p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id); + ret = p->dev_id; + new_id++; +#if 0 + printk("add_device: id:%x flags:%x padd:%x\n", + p->dev_id, p->dev_flags, p->dev_physaddr ); +#endif + } + + return ret; +} +EXPORT_SYMBOL(au1xxx_ddma_add_device); + /* Allocate a channel and return a non-zero descriptor if successful. */ u32 @@ -215,7 +233,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, int i; dbdev_tab_t *stp, *dtp; chan_tab_t *ctp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; /* We do the intialization on the first channel allocation. * We have to wait because of the interrupt handler initialization @@ -225,9 +243,6 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, au1xxx_dbdma_init(); dbdma_initialized = 1; - if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS)) - return 0; - if ((stp = find_dbdev_id(srcid)) == NULL) return 0; if ((dtp = find_dbdev_id(destid)) == NULL) return 0; @@ -269,9 +284,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, /* If kmalloc fails, it is caught below same * as a channel not available. */ - ctp = kmalloc(sizeof(chan_tab_t), GFP_KERNEL); + ctp = (chan_tab_t *) + kmalloc(sizeof(chan_tab_t), GFP_KERNEL); chan_tab_ptr[i] = ctp; - ctp->chan_index = chan = i; break; } } @@ -279,10 +294,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, if (ctp != NULL) { memset(ctp, 0, sizeof(chan_tab_t)); + ctp->chan_index = chan = i; dcp = DDMA_CHANNEL_BASE; dcp += (0x0100 * chan); ctp->chan_ptr = (au1x_dma_chan_t *)dcp; - cp = (volatile au1x_dma_chan_t *)dcp; + cp = (au1x_dma_chan_t *)dcp; ctp->chan_src = stp; ctp->chan_dest = dtp; ctp->chan_callback = callback; @@ -299,6 +315,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, i |= DDMA_CFG_DED; if (dtp->dev_intpolarity) i |= DDMA_CFG_DP; + if ((stp->dev_flags & DEV_FLAGS_SYNC) || + (dtp->dev_flags & DEV_FLAGS_SYNC)) + i |= DDMA_CFG_SYNC; cp->ddma_cfg = i; au_sync(); @@ -309,14 +328,14 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, rv = (u32)(&chan_tab_ptr[chan]); } else { - /* Release devices. - */ + /* Release devices */ stp->dev_flags &= ~DEV_FLAGS_INUSE; dtp->dev_flags &= ~DEV_FLAGS_INUSE; } } return rv; } +EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); /* Set the device width if source or destination is a FIFO. * Should be 8, 16, or 32 bits. @@ -344,6 +363,7 @@ au1xxx_dbdma_set_devwidth(u32 chanid, int bits) return rv; } +EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); /* Allocate a descriptor ring, initializing as much as possible. */ @@ -370,7 +390,8 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) * and if we try that first we are likely to not waste larger * slabs of memory. */ - desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL); + desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), + GFP_KERNEL|GFP_DMA); if (desc_base == 0) return 0; @@ -381,7 +402,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) kfree((const void *)desc_base); i = entries * sizeof(au1x_ddma_desc_t); i += (sizeof(au1x_ddma_desc_t) - 1); - if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0) + if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0) return 0; desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); @@ -461,9 +482,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) /* If source input is fifo, set static address. */ if (stp->dev_flags & DEV_FLAGS_IN) { - src0 = stp->dev_physaddr; + if ( stp->dev_flags & DEV_FLAGS_BURSTABLE ) + src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); + else src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); + } + if (stp->dev_physaddr) + src0 = stp->dev_physaddr; /* Set up dest1. For now, assume no stride and increment. * A channel attribute update can change this later. @@ -487,10 +513,18 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) /* If destination output is fifo, set static address. */ if (dtp->dev_flags & DEV_FLAGS_OUT) { - dest0 = dtp->dev_physaddr; + if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE ) + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); + else dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); } + if (dtp->dev_physaddr) + dest0 = dtp->dev_physaddr; +#if 0 + printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", + dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 ); +#endif for (i=0; idscr_cmd0 = cmd0; dp->dscr_cmd1 = cmd1; @@ -499,6 +533,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) dp->dscr_dest0 = dest0; dp->dscr_dest1 = dest1; dp->dscr_stat = 0; + dp->sw_context = dp->sw_status = 0; dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1)); dp++; } @@ -511,13 +546,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries) return (u32)(ctp->chan_desc_base); } +EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); /* Put a source buffer into the DMA ring. * This updates the source pointer and byte count. Normally used * for memory to fifo transfers. */ u32 -au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes) +_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -544,24 +580,40 @@ au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes) */ dp->dscr_source0 = virt_to_phys(buf); dp->dscr_cmd1 = nbytes; - dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ - ctp->chan_ptr->ddma_dbell = 0xffffffff; /* Make it go */ - + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + /* + * There is an errata on the Au1200/Au1550 parts that could result + * in "stale" data being DMA'd. It has to do with the snoop logic on + * the dache eviction buffer. NONCOHERENT_IO is on by default for + * these parts. If it is fixedin the future, these dma_cache_inv will + * just be nothing more than empty macros. See io.h. + * */ + dma_cache_wback_inv(buf,nbytes); + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + au_sync(); + dma_cache_wback_inv(dp, sizeof(dp)); + ctp->chan_ptr->ddma_dbell = 0; + /* return something not zero. */ return nbytes; } +EXPORT_SYMBOL(_au1xxx_dbdma_put_source); /* Put a destination buffer into the DMA ring. * This updates the destination pointer and byte count. Normally used * to place an empty buffer into the ring for fifo to memory transfers. */ u32 -au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes) +_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -583,11 +635,33 @@ au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes) if (dp->dscr_cmd0 & DSCR_CMD0_V) return 0; - /* Load up buffer address and byte count. - */ + /* Load up buffer address and byte count */ + + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + dp->dscr_dest0 = virt_to_phys(buf); dp->dscr_cmd1 = nbytes; +#if 0 + printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", + dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, + dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 ); +#endif + /* + * There is an errata on the Au1200/Au1550 parts that could result in + * "stale" data being DMA'd. It has to do with the snoop logic on the + * dache eviction buffer. NONCOHERENT_IO is on by default for these + * parts. If it is fixedin the future, these dma_cache_inv will just + * be nothing more than empty macros. See io.h. + * */ + dma_cache_inv(buf,nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + au_sync(); + dma_cache_wback_inv(dp, sizeof(dp)); + ctp->chan_ptr->ddma_dbell = 0; /* Get next descriptor pointer. */ @@ -597,6 +671,7 @@ au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes) */ return nbytes; } +EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); /* Get a destination buffer into the DMA ring. * Normally used to get a full buffer from the ring during fifo @@ -646,7 +721,7 @@ void au1xxx_dbdma_stop(u32 chanid) { chan_tab_t *ctp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; int halt_timeout = 0; ctp = *((chan_tab_t **)chanid); @@ -666,6 +741,7 @@ au1xxx_dbdma_stop(u32 chanid) cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V); au_sync(); } +EXPORT_SYMBOL(au1xxx_dbdma_stop); /* Start using the current descriptor pointer. If the dbdma encounters * a not valid descriptor, it will stop. In this case, we can just @@ -675,17 +751,17 @@ void au1xxx_dbdma_start(u32 chanid) { chan_tab_t *ctp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; ctp = *((chan_tab_t **)chanid); - cp = ctp->chan_ptr; cp->ddma_desptr = virt_to_phys(ctp->cur_ptr); cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */ au_sync(); - cp->ddma_dbell = 0xffffffff; /* Make it go */ + cp->ddma_dbell = 0; au_sync(); } +EXPORT_SYMBOL(au1xxx_dbdma_start); void au1xxx_dbdma_reset(u32 chanid) @@ -704,15 +780,21 @@ au1xxx_dbdma_reset(u32 chanid) do { dp->dscr_cmd0 &= ~DSCR_CMD0_V; + /* reset our SW status -- this is used to determine + * if a descriptor is in use by upper level SW. Since + * posting can reset 'V' bit. + */ + dp->sw_status = 0; dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); } while (dp != ctp->chan_desc_base); } +EXPORT_SYMBOL(au1xxx_dbdma_reset); u32 au1xxx_get_dma_residue(u32 chanid) { chan_tab_t *ctp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; u32 rv; ctp = *((chan_tab_t **)chanid); @@ -747,15 +829,16 @@ au1xxx_dbdma_chan_free(u32 chanid) kfree(ctp); } +EXPORT_SYMBOL(au1xxx_dbdma_chan_free); -static irqreturn_t +static void dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - u32 intstat; + u32 intstat, flags; u32 chan_index; chan_tab_t *ctp; au1x_ddma_desc_t *dp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; intstat = dbdma_gptr->ddma_intstat; au_sync(); @@ -774,19 +857,26 @@ dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs) (ctp->chan_callback)(irq, ctp->chan_callparam, regs); ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - - return IRQ_HANDLED; } -static void -au1xxx_dbdma_init(void) +static void au1xxx_dbdma_init(void) { + int irq_nr; + dbdma_gptr->ddma_config = 0; dbdma_gptr->ddma_throttle = 0; dbdma_gptr->ddma_inten = 0xffff; au_sync(); - if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT, +#if defined(CONFIG_SOC_AU1550) + irq_nr = AU1550_DDMA_INT; +#elif defined(CONFIG_SOC_AU1200) + irq_nr = AU1200_DDMA_INT; +#else + #error Unknown Au1x00 SOC +#endif + + if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT, "Au1xxx dbdma", (void *)dbdma_gptr)) printk("Can't get 1550 dbdma irq"); } @@ -797,7 +887,8 @@ au1xxx_dbdma_dump(u32 chanid) chan_tab_t *ctp; au1x_ddma_desc_t *dp; dbdev_tab_t *stp, *dtp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; + u32 i = 0; ctp = *((chan_tab_t **)chanid); stp = ctp->chan_src; @@ -822,15 +913,64 @@ au1xxx_dbdma_dump(u32 chanid) dp = ctp->chan_desc_base; do { - printk("dp %08x, cmd0 %08x, cmd1 %08x\n", - (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); - printk("src0 %08x, src1 %08x, dest0 %08x\n", - dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0); - printk("dest1 %08x, stat %08x, nxtptr %08x\n", - dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr); + printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", + i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); + printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", + dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); + printk("stat %08x, nxtptr %08x\n", + dp->dscr_stat, dp->dscr_nxtptr); dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); } while (dp != ctp->chan_desc_base); } +/* Put a descriptor into the DMA ring. + * This updates the source/destination pointers and byte count. + */ +u32 +au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + u32 nbytes=0; + + /* I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer addresses and byte count. + */ + dp->dscr_dest0 = dscr->dscr_dest0; + dp->dscr_source0 = dscr->dscr_source0; + dp->dscr_dest1 = dscr->dscr_dest1; + dp->dscr_source1 = dscr->dscr_source1; + dp->dscr_cmd1 = dscr->dscr_cmd1; + nbytes = dscr->dscr_cmd1; + /* Allow the caller to specifiy if an interrupt is generated */ + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. + */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* return something not zero. + */ + return nbytes; +} + #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index 0b912f739feb..ebf93bdbad14 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -488,7 +488,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs) intc0_req0 |= au_readl(IC0_REQ0INT); if (!intc0_req0) return; - +#ifdef AU1000_USB_DEV_REQ_INT /* * Because of the tight timing of SETUP token to reply * transactions, the USB devices-side packet complete @@ -499,7 +499,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs) do_IRQ(AU1000_USB_DEV_REQ_INT, regs); return; } - +#endif irq = au_ffs(intc0_req0) - 1; intc0_req0 &= ~(1<ep0_stage = SETUP_STAGE; break; - } + } spin_unlock(&ep0->lock); - // we're done processing the packet, free it - kfree(pkt); + // we're done processing the packet, free it + kfree(pkt); } @@ -1072,8 +1072,7 @@ dma_done_ep0_intr(int irq, void *dev_id, struct pt_regs *regs) clear_dma_done1(ep0->indma); pkt = send_packet_complete(ep0); - if (pkt) - kfree(pkt); + kfree(pkt); } /* @@ -1302,8 +1301,7 @@ usbdev_exit(void) endpoint_flush(ep); } - if (usbdev.full_conf_desc) - kfree(usbdev.full_conf_desc); + kfree(usbdev.full_conf_desc); } int diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile new file mode 100644 index 000000000000..22b673cf55af --- /dev/null +++ b/arch/mips/au1000/pb1200/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Alchemy Semiconductor PB1200 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c new file mode 100644 index 000000000000..209a07cb7321 --- /dev/null +++ b/arch/mips/au1000/pb1200/board_setup.c @@ -0,0 +1,187 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1200/Db1200 board setup. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MIPS_PB1200 +#include +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include +#define PB1200_ETH_INT DB1200_ETH_INT +#define PB1200_IDE_INT DB1200_IDE_INT +#endif + +extern void _board_init_irq(void); +extern void (*board_init_irq)(void); + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX +extern struct ide_ops *ide_ops; +extern struct ide_ops au1xxx_ide_ops; +extern u32 au1xxx_ide_virtbase; +extern u64 au1xxx_ide_physbase; +extern int au1xxx_ide_irq; + +u32 led_base_addr; +/* Ddma */ +chan_tab_t *ide_read_ch, *ide_write_ch; +u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma + +dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }; +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ + +void board_reset (void) +{ + bcsr->resets = 0; +} + +void __init board_setup(void) +{ + char *argptr = NULL; + u32 pin_func; + +#if 0 + /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ + au_sync(); +#endif + +#if defined( CONFIG_I2C_ALGO_AU1550 ) + { + u32 freq0, clksrc; + + /* Select SMBUS in CPLD */ + bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(3<<17 | 1<<4); + /* Set GPIOs correctly */ + pin_func |= 2<<17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The i2c driver depends on 50Mhz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= (3<resets bit 12: 0=SMB 1=SPI + */ +#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550) + #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\ + Refer to Pb1200/Db1200 documentation. +#elif defined( CONFIG_AU1550_PSC_SPI ) + bcsr->resets |= BCSR_RESETS_PCS0MUX; +#elif defined( CONFIG_I2C_ALGO_AU1550 ) + bcsr->resets &= (~BCSR_RESETS_PCS0MUX); +#endif + au_sync(); + +#ifdef CONFIG_MIPS_PB1200 + printk("AMD Alchemy Pb1200 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1200 + printk("AMD Alchemy Db1200 Board\n"); +#endif +#if 0 + /* Setup Pb1200 External Interrupt Controller */ + { + extern void (*board_init_irq)(void); + extern void _board_init_irq(void); + board_init_irq = _board_init_irq; + } +#endif +} diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c new file mode 100644 index 000000000000..27f09e374e15 --- /dev/null +++ b/arch/mips/au1000/pb1200/init.c @@ -0,0 +1,69 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PB1200 board setup + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +int prom_argc; +char **prom_argv, **prom_envp; +extern void __init prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "Alchemy Pb1200"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int) fw_arg0; + prom_argv = (char **) fw_arg1; + prom_envp = (char **) fw_arg2; + + mips_machgroup = MACH_GROUP_ALCHEMY; + mips_machtype = MACH_PB1200; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) { + memsize = 0x08000000; + } else { + memsize = simple_strtol(memsize_str, NULL, 0); + } + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c new file mode 100644 index 000000000000..2ec64e78aa01 --- /dev/null +++ b/arch/mips/au1000/pb1200/irqmap.c @@ -0,0 +1,180 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MIPS_PB1200 +#include +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include +#define PB1200_INT_BEGIN DB1200_INT_BEGIN +#define PB1200_INT_END DB1200_INT_END +#endif + +au1xxx_irq_map_t au1xxx_irq_map[] = { + { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade +}; + +int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); + +/* + * Support for External interrupts on the PbAu1200 Development platform. + */ +static volatile int pb1200_cascade_en=0; + +void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned short bisr = bcsr->int_status; + int extirq_nr = 0; + + /* Clear all the edge interrupts. This has no effect on level */ + bcsr->int_status = bisr; + for( ; bisr; bisr &= (bisr-1) ) + { + extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr); + /* Ack and dispatch IRQ */ + do_IRQ(extirq_nr,regs); + } +} + +inline void pb1200_enable_irq(unsigned int irq_nr) +{ + bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN); + bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN); +} + +inline void pb1200_disable_irq(unsigned int irq_nr) +{ + bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN); + bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN); +} + +static unsigned int pb1200_startup_irq( unsigned int irq_nr ) +{ + if (++pb1200_cascade_en == 1) + { + request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, + 0, "Pb1200 Cascade", &pb1200_cascade_handler ); +#ifdef CONFIG_MIPS_PB1200 + /* We have a problem with CPLD rev3. Enable a workaround */ + if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3) + { + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n"); + printk("updated to latest revision. This software will not\n"); + printk("work on anything less than CPLD rev4\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + while(1); + } +#endif + } + pb1200_enable_irq(irq_nr); + return 0; +} + +static void pb1200_shutdown_irq( unsigned int irq_nr ) +{ + pb1200_disable_irq(irq_nr); + if (--pb1200_cascade_en == 0) + { + free_irq(AU1000_GPIO_7,&pb1200_cascade_handler ); + } + return; +} + +static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr) +{ + pb1200_disable_irq( irq_nr ); +} + +static void pb1200_end_irq(unsigned int irq_nr) +{ + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { + pb1200_enable_irq(irq_nr); + } +} + +static struct hw_interrupt_type external_irq_type = +{ +#ifdef CONFIG_MIPS_PB1200 + "Pb1200 Ext", +#endif +#ifdef CONFIG_MIPS_DB1200 + "Db1200 Ext", +#endif + pb1200_startup_irq, + pb1200_shutdown_irq, + pb1200_enable_irq, + pb1200_disable_irq, + pb1200_mask_and_ack_irq, + pb1200_end_irq, + NULL +}; + +void _board_init_irq(void) +{ + int irq_nr; + + for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++) + { + irq_desc[irq_nr].handler = &external_irq_type; + pb1200_disable_irq(irq_nr); + } + + /* GPIO_7 can not be hooked here, so it is hooked upon first + request of any source attached to the cascade */ +} + diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 7685f8baf3f0..66c2a2788ffe 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -116,6 +116,8 @@ static inline void check_wait(void) case CPU_AU1000: case CPU_AU1100: case CPU_AU1500: + case CPU_AU1550: + case CPU_AU1200: if (au1k_wait_ptr != NULL) { cpu_wait = au1k_wait_ptr; printk(" available.\n"); @@ -505,6 +507,9 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c) case 3: c->cputype = CPU_AU1550; break; + case 4: + c->cputype = CPU_AU1200; + break; default: panic("Unknown Au Core!"); break; diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 760fcdfea18e..13888520d41c 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -60,6 +60,9 @@ static const char *cpu_name[] = { [CPU_TX3927] "TX3927", [CPU_AU1000] "Au1000", [CPU_AU1500] "Au1500", + [CPU_AU1100] "Au1100", + [CPU_AU1550] "Au1550", + [CPU_AU1200] "Au1200", [CPU_4KEC] "MIPS 4KEc", [CPU_4KSC] "MIPS 4KSc", [CPU_VR41XX] "NEC Vr41xx", diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 03100b8a45d9..e26dd829bf20 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1036,7 +1036,11 @@ static void __init probe_pcache(void) c->icache.flags |= MIPS_CACHE_VTAG; break; + case CPU_AU1000: case CPU_AU1500: + case CPU_AU1100: + case CPU_AU1550: + case CPU_AU1200: c->icache.flags |= MIPS_CACHE_IC_F_DC; break; } diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 6569be3983c7..248537cebc89 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -840,6 +840,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case CPU_AU1100: case CPU_AU1500: case CPU_AU1550: + case CPU_AU1200: i_nop(p); tlbw(p); break; diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index b1e57d783604..404856e6b82d 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -177,6 +177,8 @@ #define MACH_MTX1 7 /* 4G MTX-1 Au1500-based board */ #define MACH_PB1550 8 /* Au1550-based eval board */ #define MACH_DB1550 9 /* Au1550-based eval board */ +#define MACH_PB1200 10 /* Au1200-based eval board */ +#define MACH_DB1200 11 /* Au1200-based eval board */ /* * Valid machtype for group NEC_VR41XX diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index c60281799801..8e167bfd40b1 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -182,7 +182,8 @@ #define CPU_VR4133 56 #define CPU_AU1550 57 #define CPU_24K 58 -#define CPU_LAST 58 +#define CPU_AU1200 59 +#define CPU_LAST 59 /* * ISA Level encodings diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 148bae2fa7d3..28b04a5f67cf 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -162,27 +162,355 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) #endif -/* SDRAM Controller */ +/* + * SDRAM Register Offsets + */ #if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100) -#define MEM_SDMODE0 0xB4000000 -#define MEM_SDMODE1 0xB4000004 -#define MEM_SDMODE2 0xB4000008 +#define MEM_SDMODE0 (0x0000) +#define MEM_SDMODE1 (0x0004) +#define MEM_SDMODE2 (0x0008) +#define MEM_SDADDR0 (0x000C) +#define MEM_SDADDR1 (0x0010) +#define MEM_SDADDR2 (0x0014) +#define MEM_SDREFCFG (0x0018) +#define MEM_SDPRECMD (0x001C) +#define MEM_SDAUTOREF (0x0020) +#define MEM_SDWRMD0 (0x0024) +#define MEM_SDWRMD1 (0x0028) +#define MEM_SDWRMD2 (0x002C) +#define MEM_SDSLEEP (0x0030) +#define MEM_SDSMCKE (0x0034) + +#ifndef ASSEMBLER +/*typedef volatile struct +{ + uint32 sdmode0; + uint32 sdmode1; + uint32 sdmode2; + uint32 sdaddr0; + uint32 sdaddr1; + uint32 sdaddr2; + uint32 sdrefcfg; + uint32 sdautoref; + uint32 sdwrmd0; + uint32 sdwrmd1; + uint32 sdwrmd2; + uint32 sdsleep; + uint32 sdsmcke; + +} AU1X00_SDRAM;*/ +#endif + +/* + * MEM_SDMODE register content definitions + */ +#define MEM_SDMODE_F (1<<22) +#define MEM_SDMODE_SR (1<<21) +#define MEM_SDMODE_BS (1<<20) +#define MEM_SDMODE_RS (3<<18) +#define MEM_SDMODE_CS (7<<15) +#define MEM_SDMODE_TRAS (15<<11) +#define MEM_SDMODE_TMRD (3<<9) +#define MEM_SDMODE_TWR (3<<7) +#define MEM_SDMODE_TRP (3<<5) +#define MEM_SDMODE_TRCD (3<<3) +#define MEM_SDMODE_TCL (7<<0) + +#define MEM_SDMODE_BS_2Bank (0<<20) +#define MEM_SDMODE_BS_4Bank (1<<20) +#define MEM_SDMODE_RS_11Row (0<<18) +#define MEM_SDMODE_RS_12Row (1<<18) +#define MEM_SDMODE_RS_13Row (2<<18) +#define MEM_SDMODE_RS_N(N) ((N)<<18) +#define MEM_SDMODE_CS_7Col (0<<15) +#define MEM_SDMODE_CS_8Col (1<<15) +#define MEM_SDMODE_CS_9Col (2<<15) +#define MEM_SDMODE_CS_10Col (3<<15) +#define MEM_SDMODE_CS_11Col (4<<15) +#define MEM_SDMODE_CS_N(N) ((N)<<15) +#define MEM_SDMODE_TRAS_N(N) ((N)<<11) +#define MEM_SDMODE_TMRD_N(N) ((N)<<9) +#define MEM_SDMODE_TWR_N(N) ((N)<<7) +#define MEM_SDMODE_TRP_N(N) ((N)<<5) +#define MEM_SDMODE_TRCD_N(N) ((N)<<3) +#define MEM_SDMODE_TCL_N(N) ((N)<<0) + +/* + * MEM_SDADDR register contents definitions + */ +#define MEM_SDADDR_E (1<<20) +#define MEM_SDADDR_CSBA (0x03FF<<10) +#define MEM_SDADDR_CSMASK (0x03FF<<0) +#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12) +#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22) + +/* + * MEM_SDREFCFG register content definitions + */ +#define MEM_SDREFCFG_TRC (15<<28) +#define MEM_SDREFCFG_TRPM (3<<26) +#define MEM_SDREFCFG_E (1<<25) +#define MEM_SDREFCFG_RE (0x1ffffff<<0) +#define MEM_SDREFCFG_TRC_N(N) ((N)< + +// This is defined in au1000.h with bogus value +#undef AU1X00_EXTERNAL_INT + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX + +/* SPI and SMB are muxed on the Pb1200 board. + Refer to board documentation. + */ +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* AC97 and I2S are muxed on the Pb1200 board. + Refer to board documentation. + */ +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define I2S_PSC_BASE PSC1_BASE_ADDR + +#define BCSR_KSEG1_ADDR 0xB9800000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 board; + u16 reserved5; + /*18*/ u16 disk_leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + + /*20*/ u16 intclr; + u16 reserved8; + /*24*/ u16 intset; + u16 reserved9; + /*28*/ u16 intclr_mask; + u16 reserved10; + /*2C*/ u16 intset_mask; + u16 reserved11; + + /*30*/ u16 sig_status; + u16 reserved12; + /*34*/ u16 int_status; + u16 reserved13; + /*38*/ u16 reserved14; + u16 reserved15; + /*3C*/ u16 reserved16; + u16 reserved17; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_IDECBLID 0x0200 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_ETH 0x0001 +#define BCSR_RESETS_CAMERA 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_IDE 0x0008 +#define BCSR_RESETS_TV 0x0010 +/* not resets but in the same register */ +#define BCSR_RESETS_PWMR1mUX 0x0800 +#define BCSR_RESETS_PCS0MUX 0x1000 +#define BCSR_RESETS_PCS1MUX 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_BOARD_LCDVEE 0x0001 +#define BCSR_BOARD_LCDVDD 0x0002 +#define BCSR_BOARD_LCDBL 0x0004 +#define BCSR_BOARD_CAMSNAP 0x0010 +#define BCSR_BOARD_CAMPWR 0x0020 +#define BCSR_BOARD_SD0PWR 0x0040 + +#define BCSR_LEDS_DECIMALS 0x0003 +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +/* Bit positions for the different interrupt sources */ +#define BCSR_INT_IDE 0x0001 +#define BCSR_INT_ETH 0x0002 +#define BCSR_INT_PC0 0x0004 +#define BCSR_INT_PC0STSCHG 0x0008 +#define BCSR_INT_PC1 0x0010 +#define BCSR_INT_PC1STSCHG 0x0020 +#define BCSR_INT_DC 0x0040 +#define BCSR_INT_FLASHBUSY 0x0080 +#define BCSR_INT_PC0INSERT 0x0100 +#define BCSR_INT_PC0EJECT 0x0200 +#define BCSR_INT_PC1INSERT 0x0400 +#define BCSR_INT_PC1EJECT 0x0800 +#define BCSR_INT_SD0INSERT 0x1000 +#define BCSR_INT_SD0EJECT 0x2000 + +#define AU1XXX_SMC91111_PHYS_ADDR (0x19000300) +#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT + +#define AU1XXX_ATA_PHYS_ADDR (0x18800000) +#define AU1XXX_ATA_PHYS_LEN (0x100) +#define AU1XXX_ATA_REG_OFFSET (5) +#define AU1XXX_ATA_INT DB1200_IDE_INT +#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1; +#define AU1XXX_ATA_RQSIZE 128 + +#define NAND_PHYS_ADDR 0x20000000 + +/* + * External Interrupts for Pb1200 as of 8/6/2004. + * Bit positions in the CPLD registers can be calculated by taking + * the interrupt define and subtracting the DB1200_INT_BEGIN value. + * *example: IDE bis pos is = 64 - 64 + ETH bit pos is = 65 - 64 + */ +#define DB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1) +#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0) +#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1) +#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2) +#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3) +#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4) +#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5) +#define DB1200_DC_INT (DB1200_INT_BEGIN + 6) +#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7) +#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8) +#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9) +#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10) +#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11) +#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12) +#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13) + +#define DB1200_INT_END (DB1200_INT_BEGIN + 15) + +/* For drivers/pcmcia/au1000_db1x00.c */ +#define BOARD_PC0_INT DB1200_PC0_INT +#define BOARD_PC1_INT DB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) + +#endif /* __ASM_DB1200_H */ + diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h new file mode 100644 index 000000000000..0f6646335e90 --- /dev/null +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -0,0 +1,244 @@ +/* + * AMD Alchemy PB1200 Referrence Board + * Board Registers defines. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * + */ +#ifndef __ASM_PB1200_H +#define __ASM_PB1200_H + +#include + +// This is defined in au1000.h with bogus value +#undef AU1X00_EXTERNAL_INT + +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX + +/* SPI and SMB are muxed on the Pb1200 board. + Refer to board documentation. + */ +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* AC97 and I2S are muxed on the Pb1200 board. + Refer to board documentation. + */ +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define I2S_PSC_BASE PSC1_BASE_ADDR + +#define BCSR_KSEG1_ADDR 0xAD800000 + +typedef volatile struct +{ + /*00*/ u16 whoami; + u16 reserved0; + /*04*/ u16 status; + u16 reserved1; + /*08*/ u16 switches; + u16 reserved2; + /*0C*/ u16 resets; + u16 reserved3; + + /*10*/ u16 pcmcia; + u16 reserved4; + /*14*/ u16 board; + u16 reserved5; + /*18*/ u16 disk_leds; + u16 reserved6; + /*1C*/ u16 system; + u16 reserved7; + + /*20*/ u16 intclr; + u16 reserved8; + /*24*/ u16 intset; + u16 reserved9; + /*28*/ u16 intclr_mask; + u16 reserved10; + /*2C*/ u16 intset_mask; + u16 reserved11; + + /*30*/ u16 sig_status; + u16 reserved12; + /*34*/ u16 int_status; + u16 reserved13; + /*38*/ u16 reserved14; + u16 reserved15; + /*3C*/ u16 reserved16; + u16 reserved17; + +} BCSR; + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +/* + * Register bit definitions for the BCSRs + */ +#define BCSR_WHOAMI_DCID 0x000F +#define BCSR_WHOAMI_CPLD 0x00F0 +#define BCSR_WHOAMI_BOARD 0x0F00 + +#define BCSR_STATUS_PCMCIA0VS 0x0003 +#define BCSR_STATUS_PCMCIA1VS 0x000C +#define BCSR_STATUS_SWAPBOOT 0x0040 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_IDECBLID 0x0200 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 + +#define BCSR_SWITCHES_OCTAL 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + +#define BCSR_RESETS_ETH 0x0001 +#define BCSR_RESETS_CAMERA 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_IDE 0x0008 +/* not resets but in the same register */ +#define BCSR_RESETS_WSCFSM 0x0800 +#define BCSR_RESETS_PCS0MUX 0x1000 +#define BCSR_RESETS_PCS1MUX 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 +#define BCSR_RESETS_SD1MUX 0x8000 + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + +#define BCSR_BOARD_LCDVEE 0x0001 +#define BCSR_BOARD_LCDVDD 0x0002 +#define BCSR_BOARD_LCDBL 0x0004 +#define BCSR_BOARD_CAMSNAP 0x0010 +#define BCSR_BOARD_CAMPWR 0x0020 +#define BCSR_BOARD_SD0PWR 0x0040 +#define BCSR_BOARD_SD1PWR 0x0080 + +#define BCSR_LEDS_DECIMALS 0x00FF +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + +#define BCSR_SYSTEM_VDDI 0x001F +#define BCSR_SYSTEM_POWEROFF 0x4000 +#define BCSR_SYSTEM_RESET 0x8000 + +/* Bit positions for the different interrupt sources */ +#define BCSR_INT_IDE 0x0001 +#define BCSR_INT_ETH 0x0002 +#define BCSR_INT_PC0 0x0004 +#define BCSR_INT_PC0STSCHG 0x0008 +#define BCSR_INT_PC1 0x0010 +#define BCSR_INT_PC1STSCHG 0x0020 +#define BCSR_INT_DC 0x0040 +#define BCSR_INT_FLASHBUSY 0x0080 +#define BCSR_INT_PC0INSERT 0x0100 +#define BCSR_INT_PC0EJECT 0x0200 +#define BCSR_INT_PC1INSERT 0x0400 +#define BCSR_INT_PC1EJECT 0x0800 +#define BCSR_INT_SD0INSERT 0x1000 +#define BCSR_INT_SD0EJECT 0x2000 +#define BCSR_INT_SD1INSERT 0x4000 +#define BCSR_INT_SD1EJECT 0x8000 + +#define AU1XXX_SMC91111_PHYS_ADDR (0x0D000300) +#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT + +#define AU1XXX_ATA_PHYS_ADDR (0x0C800000) +#define AU1XXX_ATA_PHYS_LEN (0x100) +#define AU1XXX_ATA_REG_OFFSET (5) +#define AU1XXX_ATA_INT PB1200_IDE_INT +#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1; +#define AU1XXX_ATA_RQSIZE 128 + +#define NAND_PHYS_ADDR 0x1C000000 + +/* Timing values as described in databook, * ns value stripped of + * lower 2 bits. + * These defines are here rather than an SOC1200 generic file because + * the parts chosen on another board may be different and may require + * different timings. + */ +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) + +/* Bitfield shift amounts */ +#define NAND_T_H_SHIFT 0 +#define NAND_T_PUL_SHIFT 4 +#define NAND_T_SU_SHIFT 8 +#define NAND_T_WH_SHIFT 12 + +#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) + + +/* + * External Interrupts for Pb1200 as of 8/6/2004. + * Bit positions in the CPLD registers can be calculated by taking + * the interrupt define and subtracting the PB1200_INT_BEGIN value. + * *example: IDE bis pos is = 64 - 64 + ETH bit pos is = 65 - 64 + */ +#define PB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1) +#define PB1200_IDE_INT (PB1200_INT_BEGIN + 0) +#define PB1200_ETH_INT (PB1200_INT_BEGIN + 1) +#define PB1200_PC0_INT (PB1200_INT_BEGIN + 2) +#define PB1200_PC0_STSCHG_INT (PB1200_INT_BEGIN + 3) +#define PB1200_PC1_INT (PB1200_INT_BEGIN + 4) +#define PB1200_PC1_STSCHG_INT (PB1200_INT_BEGIN + 5) +#define PB1200_DC_INT (PB1200_INT_BEGIN + 6) +#define PB1200_FLASHBUSY_INT (PB1200_INT_BEGIN + 7) +#define PB1200_PC0_INSERT_INT (PB1200_INT_BEGIN + 8) +#define PB1200_PC0_EJECT_INT (PB1200_INT_BEGIN + 9) +#define PB1200_PC1_INSERT_INT (PB1200_INT_BEGIN + 10) +#define PB1200_PC1_EJECT_INT (PB1200_INT_BEGIN + 11) +#define PB1200_SD0_INSERT_INT (PB1200_INT_BEGIN + 12) +#define PB1200_SD0_EJECT_INT (PB1200_INT_BEGIN + 13) +#define PB1200_SD1_INSERT_INT (PB1200_INT_BEGIN + 14) +#define PB1200_SD1_EJECT_INT (PB1200_INT_BEGIN + 15) + +#define PB1200_INT_END (PB1200_INT_BEGIN + 15) + +/* For drivers/pcmcia/au1000_db1x00.c */ +#define BOARD_PC0_INT PB1200_PC0_INT +#define BOARD_PC1_INT PB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) + +#endif /* __ASM_PB1200_H */ + -- GitLab From 2d32ffa44a5323fda147bd5b0723744a9163e37f Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Tue, 1 Mar 2005 07:54:50 +0000 Subject: [PATCH 0958/1519] Moved irq_tab_alchemy to the board specific irqmap.c files. Cleaned up a to of warnings in dbdma.c. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/dbdma.c | 20 +++---- arch/mips/au1000/db1x00/irqmap.c | 32 +++++++++++ arch/mips/au1000/mtx-1/irqmap.c | 11 ++++ arch/mips/au1000/pb1500/irqmap.c | 5 ++ arch/mips/au1000/pb1550/irqmap.c | 5 ++ arch/mips/pci/fixup-au1000.c | 78 +-------------------------- include/asm-mips/mach-au1x00/au1000.h | 13 +++++ 7 files changed, 77 insertions(+), 87 deletions(-) diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index cf10dc246f82..8f78c2fe7cf5 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -39,11 +39,11 @@ #include #include #include +#include #include #include #include -/* #include */ #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) @@ -596,10 +596,10 @@ _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) * these parts. If it is fixedin the future, these dma_cache_inv will * just be nothing more than empty macros. See io.h. * */ - dma_cache_wback_inv(buf,nbytes); + dma_cache_wback_inv((unsigned long)buf, nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ au_sync(); - dma_cache_wback_inv(dp, sizeof(dp)); + dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); ctp->chan_ptr->ddma_dbell = 0; /* return something not zero. @@ -657,10 +657,10 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) * parts. If it is fixedin the future, these dma_cache_inv will just * be nothing more than empty macros. See io.h. * */ - dma_cache_inv(buf,nbytes); + dma_cache_inv((unsigned long)buf,nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ au_sync(); - dma_cache_wback_inv(dp, sizeof(dp)); + dma_cache_wback_inv((unsigned long)dp, sizeof(dp)); ctp->chan_ptr->ddma_dbell = 0; /* Get next descriptor pointer. @@ -820,8 +820,7 @@ au1xxx_dbdma_chan_free(u32 chanid) au1xxx_dbdma_stop(chanid); - if (ctp->chan_desc_base != NULL) - kfree(ctp->chan_desc_base); + kfree((void *)ctp->chan_desc_base); stp->dev_flags &= ~DEV_FLAGS_INUSE; dtp->dev_flags &= ~DEV_FLAGS_INUSE; @@ -831,11 +830,11 @@ au1xxx_dbdma_chan_free(u32 chanid) } EXPORT_SYMBOL(au1xxx_dbdma_chan_free); -static void +static irqreturn_t dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - u32 intstat, flags; - u32 chan_index; + u32 intstat; + u32 chan_index; chan_tab_t *ctp; au1x_ddma_desc_t *dp; au1x_dma_chan_t *cp; @@ -857,6 +856,7 @@ dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs) (ctp->chan_callback)(irq, ctp->chan_callparam, regs); ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + return IRQ_RETVAL(1); } static void au1xxx_dbdma_init(void) diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c index 8f6ef0dbe1f8..f63024a9893a 100644 --- a/arch/mips/au1000/db1x00/irqmap.c +++ b/arch/mips/au1000/db1x00/irqmap.c @@ -48,6 +48,38 @@ #include #include +#ifdef CONFIG_MIPS_DB1500 +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */ + [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ +}; +#endif + +#ifdef CONFIG_MIPS_BOSPORUS +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */ + [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */ + [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ +}; +#endif + +#ifdef CONFIG_MIPS_MIRAGE +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */ + [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */ + [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */ +}; +#endif + +#ifdef CONFIG_MIPS_DB1550 +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */ + [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */ +}; +#endif + + au1xxx_irq_map_t au1xxx_irq_map[] = { #ifndef CONFIG_MIPS_MIRAGE diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c index ddcb9d089dc1..f9a0a8b9def2 100644 --- a/arch/mips/au1000/mtx-1/irqmap.c +++ b/arch/mips/au1000/mtx-1/irqmap.c @@ -47,6 +47,17 @@ #include #include +char irq_tab_alchemy[][5] __initdata = { + [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ +}; + au1xxx_irq_map_t au1xxx_irq_map[] = { { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c index 476e25001681..8cb76c2edb5e 100644 --- a/arch/mips/au1000/pb1500/irqmap.c +++ b/arch/mips/au1000/pb1500/irqmap.c @@ -47,6 +47,11 @@ #include #include +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */ + [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ +}; + au1xxx_irq_map_t au1xxx_irq_map[] = { { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0}, { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c index 889d4949ee76..47c7a1c19f4b 100644 --- a/arch/mips/au1000/pb1550/irqmap.c +++ b/arch/mips/au1000/pb1550/irqmap.c @@ -47,6 +47,11 @@ #include #include +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */ +}; + au1xxx_irq_map_t au1xxx_irq_map[] = { { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c index 39fe2b16fcec..c2f8304fe55b 100644 --- a/arch/mips/pci/fixup-au1000.c +++ b/arch/mips/pci/fixup-au1000.c @@ -26,7 +26,6 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include #include #include @@ -34,82 +33,7 @@ #include -/* - * Shortcut - */ -#ifdef CONFIG_SOC_AU1500 -#define INTA AU1000_PCI_INTA -#define INTB AU1000_PCI_INTB -#define INTC AU1000_PCI_INTC -#define INTD AU1000_PCI_INTD -#endif - -#ifdef CONFIG_SOC_AU1550 -#define INTA AU1550_PCI_INTA -#define INTB AU1550_PCI_INTB -#define INTC AU1550_PCI_INTC -#define INTD AU1550_PCI_INTD -#endif - -#define INTX 0xFF /* not valid */ - -#ifdef CONFIG_MIPS_DB1500 -static char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_BOSPORUS -static char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */ - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_MIRAGE -static char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */ - [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */ - [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */ -}; -#endif - -#ifdef CONFIG_MIPS_DB1550 -static char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - -#ifdef CONFIG_MIPS_PB1500 -static char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_PB1550 -static char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - -#ifdef CONFIG_MIPS_MTX1 -static char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ -}; -#endif +extern char irq_tab_alchemy[][5]; int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 28b04a5f67cf..ffcd0492eb3a 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -757,6 +757,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1500_GPIO_207 62 #define AU1500_GPIO_208_215 63 +/* shortcuts */ +#define INTA AU1000_PCI_INTA +#define INTB AU1000_PCI_INTB +#define INTC AU1000_PCI_INTC +#define INTD AU1000_PCI_INTD + #define UART0_ADDR 0xB1100000 #define UART3_ADDR 0xB1400000 @@ -907,6 +913,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1500_GPIO_207 62 #define AU1500_GPIO_208_218 63 // Logical or of GPIO208:218 +/* shortcuts */ +#define INTA AU1550_PCI_INTA +#define INTB AU1550_PCI_INTB +#define INTC AU1550_PCI_INTC +#define INTD AU1550_PCI_INTD + #define UART0_ADDR 0xB1100000 #define UART1_ADDR 0xB1200000 #define UART3_ADDR 0xB1400000 @@ -1019,6 +1031,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1000_LAST_INTC0_INT 31 #define AU1000_LAST_INTC1_INT 63 #define AU1000_MAX_INTR 63 +#define INTX 0xFF /* not valid */ /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 -- GitLab From 0f04afb59565c3029563b9a79b3513c9f3327a27 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 1 Mar 2005 10:38:58 +0000 Subject: [PATCH 0959/1519] ISOify. Signed-off-by: Ralf Baechle --- arch/mips/au1000/db1x00/mirage_ts.c | 16 ++-- arch/mips/kernel/proc.c | 120 ++++++++++++++-------------- include/asm-mips/io.h | 4 +- include/asm-mips/serial.h | 12 +-- 4 files changed, 76 insertions(+), 76 deletions(-) diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c index ade35e432004..c29852c24b4f 100644 --- a/arch/mips/au1000/db1x00/mirage_ts.c +++ b/arch/mips/au1000/db1x00/mirage_ts.c @@ -102,15 +102,15 @@ static struct { } mirage_ts_cal = { #if 0 - xscale: 84, - xtrans: -157, - yscale: 66, - ytrans: -150, + .xscale = 84, + .xtrans = -157, + .yscale = 66, + .ytrans = -150, #else - xscale: 84, - xtrans: -150, - yscale: 66, - ytrans: -146, + .xscale = 84, + .xtrans = -150, + .yscale = 66, + .ytrans = -146, #endif }; diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 13888520d41c..d1290b1ec408 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -19,66 +19,66 @@ unsigned int vced_count, vcei_count; static const char *cpu_name[] = { - [CPU_UNKNOWN] "unknown", - [CPU_R2000] "R2000", - [CPU_R3000] "R3000", - [CPU_R3000A] "R3000A", - [CPU_R3041] "R3041", - [CPU_R3051] "R3051", - [CPU_R3052] "R3052", - [CPU_R3081] "R3081", - [CPU_R3081E] "R3081E", - [CPU_R4000PC] "R4000PC", - [CPU_R4000SC] "R4000SC", - [CPU_R4000MC] "R4000MC", - [CPU_R4200] "R4200", - [CPU_R4400PC] "R4400PC", - [CPU_R4400SC] "R4400SC", - [CPU_R4400MC] "R4400MC", - [CPU_R4600] "R4600", - [CPU_R6000] "R6000", - [CPU_R6000A] "R6000A", - [CPU_R8000] "R8000", - [CPU_R10000] "R10000", - [CPU_R12000] "R12000", - [CPU_R4300] "R4300", - [CPU_R4650] "R4650", - [CPU_R4700] "R4700", - [CPU_R5000] "R5000", - [CPU_R5000A] "R5000A", - [CPU_R4640] "R4640", - [CPU_NEVADA] "Nevada", - [CPU_RM7000] "RM7000", - [CPU_RM9000] "RM9000", - [CPU_R5432] "R5432", - [CPU_4KC] "MIPS 4Kc", - [CPU_5KC] "MIPS 5Kc", - [CPU_R4310] "R4310", - [CPU_SB1] "SiByte SB1", - [CPU_TX3912] "TX3912", - [CPU_TX3922] "TX3922", - [CPU_TX3927] "TX3927", - [CPU_AU1000] "Au1000", - [CPU_AU1500] "Au1500", - [CPU_AU1100] "Au1100", - [CPU_AU1550] "Au1550", - [CPU_AU1200] "Au1200", - [CPU_4KEC] "MIPS 4KEc", - [CPU_4KSC] "MIPS 4KSc", - [CPU_VR41XX] "NEC Vr41xx", - [CPU_R5500] "R5500", - [CPU_TX49XX] "TX49xx", - [CPU_20KC] "MIPS 20Kc", - [CPU_24K] "MIPS 24K", - [CPU_25KF] "MIPS 25Kf", - [CPU_VR4111] "NEC VR4111", - [CPU_VR4121] "NEC VR4121", - [CPU_VR4122] "NEC VR4122", - [CPU_VR4131] "NEC VR4131", - [CPU_VR4133] "NEC VR4133", - [CPU_VR4181] "NEC VR4181", - [CPU_VR4181A] "NEC VR4181A", - [CPU_SR71000] "Sandcraft SR71000" + [CPU_UNKNOWN] = "unknown", + [CPU_R2000] = "R2000", + [CPU_R3000] = "R3000", + [CPU_R3000A] = "R3000A", + [CPU_R3041] = "R3041", + [CPU_R3051] = "R3051", + [CPU_R3052] = "R3052", + [CPU_R3081] = "R3081", + [CPU_R3081E] = "R3081E", + [CPU_R4000PC] = "R4000PC", + [CPU_R4000SC] = "R4000SC", + [CPU_R4000MC] = "R4000MC", + [CPU_R4200] = "R4200", + [CPU_R4400PC] = "R4400PC", + [CPU_R4400SC] = "R4400SC", + [CPU_R4400MC] = "R4400MC", + [CPU_R4600] = "R4600", + [CPU_R6000] = "R6000", + [CPU_R6000A] = "R6000A", + [CPU_R8000] = "R8000", + [CPU_R10000] = "R10000", + [CPU_R12000] = "R12000", + [CPU_R4300] = "R4300", + [CPU_R4650] = "R4650", + [CPU_R4700] = "R4700", + [CPU_R5000] = "R5000", + [CPU_R5000A] = "R5000A", + [CPU_R4640] = "R4640", + [CPU_NEVADA] = "Nevada", + [CPU_RM7000] = "RM7000", + [CPU_RM9000] = "RM9000", + [CPU_R5432] = "R5432", + [CPU_4KC] = "MIPS 4Kc", + [CPU_5KC] = "MIPS 5Kc", + [CPU_R4310] = "R4310", + [CPU_SB1] = "SiByte SB1", + [CPU_TX3912] = "TX3912", + [CPU_TX3922] = "TX3922", + [CPU_TX3927] = "TX3927", + [CPU_AU1000] = "Au1000", + [CPU_AU1500] = "Au1500", + [CPU_AU1100] = "Au1100", + [CPU_AU1550] = "Au1550", + [CPU_AU1200] = "Au1200", + [CPU_4KEC] = "MIPS 4KEc", + [CPU_4KSC] = "MIPS 4KSc", + [CPU_VR41XX] = "NEC Vr41xx", + [CPU_R5500] = "R5500", + [CPU_TX49XX] = "TX49xx", + [CPU_20KC] = "MIPS 20Kc", + [CPU_24K] = "MIPS 24K", + [CPU_25KF] = "MIPS 25Kf", + [CPU_VR4111] = "NEC VR4111", + [CPU_VR4121] = "NEC VR4121", + [CPU_VR4122] = "NEC VR4122", + [CPU_VR4131] = "NEC VR4131", + [CPU_VR4133] = "NEC VR4133", + [CPU_VR4181] = "NEC VR4181", + [CPU_VR4181A] = "NEC VR4181A", + [CPU_SR71000] = "Sandcraft SR71000" }; diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 644c085e29f3..e03cb77b131c 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -202,10 +202,10 @@ extern unsigned long isa_slot_offset; */ #define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) -extern void * __ioremap(phys_t offset, phys_t size, unsigned long flags); +extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags); extern void __iounmap(volatile void __iomem *addr); -static inline void * __ioremap_mode(phys_t offset, unsigned long size, +static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, unsigned long flags) { if (cpu_has_64bit_addresses) { diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h index 780197abb8ff..ce1043530e59 100644 --- a/include/asm-mips/serial.h +++ b/include/asm-mips/serial.h @@ -217,9 +217,9 @@ #define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L #define _JAGUAR_ATX_SERIAL_INIT(int, base) \ - { baud_base: JAGUAR_ATX_BASE_BAUD, irq: int, \ - flags: (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: (u8 *) base, iomem_reg_shift: 2, \ + { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \ + .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + .iomem_base = (u8 *) base, iomem_reg_shift: 2, \ io_type: SERIAL_IO_MEM } #define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \ _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE) @@ -233,9 +233,9 @@ #define OCELOT_3_SERIAL_BASE (signed)0xfd000020 #define _OCELOT_3_SERIAL_INIT(int, base) \ - { baud_base: OCELOT_3_BASE_BAUD, irq: int, \ - flags: STD_COM_FLAGS, \ - iomem_base: (u8 *) base, iomem_reg_shift: 2, \ + { .baud_base = OCELOT_3_BASE_BAUD, irq: int, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) base, iomem_reg_shift: 2, \ io_type: SERIAL_IO_MEM } #define MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ -- GitLab From 5068debff2dcbc8f624811e3c06d60c7c0bba744 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 1 Mar 2005 18:12:06 +0000 Subject: [PATCH 0960/1519] New hazard handling function back_to_back_c0_hazard() to handle back to back mtc0 / mfc0 pairs from the same coprocessor register. Signed-off-by: Ralf Baechle --- include/asm-mips/hazards.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h index f524eaccd5f1..d6e88cf06ba9 100644 --- a/include/asm-mips/hazards.h +++ b/include/asm-mips/hazards.h @@ -124,6 +124,9 @@ __asm__( ".set\tmips32\n\t" \ "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \ ".set\tmips0") + +#define back_to_back_c0_hazard() do { } while (0) + #else /* @@ -141,6 +144,12 @@ __asm__( "nop; nop; nop; nop; nop; nop;\n\t" \ ".set reorder\n\t") +#define back_to_back_c0_hazard() \ + __asm__ __volatile__( \ + " .set noreorder \n" \ + " nop; nop; nop \n" \ + " .set reorder \n") + #endif /* @@ -170,6 +179,10 @@ __asm__( __asm__ __volatile__( \ "_ehb\t\t\t\t# irq_disable_hazard") +#define back_to_back_c0_hazard() \ + __asm__ __volatile__( \ + "_ehb\t\t\t\t# back_to_back_c0_hazard") + #elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) /* @@ -186,6 +199,8 @@ __asm__( #define irq_enable_hazard() do { } while (0) #define irq_disable_hazard() do { } while (0) +#define back_to_back_c0_hazard() do { } while (0) + #else /* @@ -210,6 +225,12 @@ __asm__( __asm__ __volatile__( \ "_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard") +#define back_to_back_c0_hazard() \ + __asm__ __volatile__( \ + " .set noreorder \n" \ + " nop; nop; nop \n" \ + " .set reorder \n") + #endif #endif /* __ASSEMBLY__ */ -- GitLab From 14f18b7f7e58de9a34c4b5fd38d5f73f22fba7ac Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 1 Mar 2005 18:15:08 +0000 Subject: [PATCH 0961/1519] On 24K we did always disable cache parity protection - obviously not the greatest thing to do. Try to enable parity protection, check if we actually succeeded and print a message about the outcome of this. Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index a53b1ed7b386..d06db5f8115f 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -736,16 +736,12 @@ static inline void parity_protection_init(void) { switch (current_cpu_data.cputype) { case CPU_24K: - /* 24K cache parity not currently implemented in FPGA */ - printk(KERN_INFO "Disable cache parity protection for " - "MIPS 24K CPU.\n"); - write_c0_ecc(read_c0_ecc() & ~0x80000000); - break; case CPU_5KC: - /* Set the PE bit (bit 31) in the c0_ecc register. */ - printk(KERN_INFO "Enable cache parity protection for " - "MIPS 5KC/24K CPUs.\n"); - write_c0_ecc(read_c0_ecc() | 0x80000000); + write_c0_ecc(0x80000000); + back_to_back_c0_hazard(); + /* Set the PE bit (bit 31) in the c0_errctl register. */ + printk(KERN_INFO "Cache parity protection %sabled\n", + (read_c0_ecc() & 0x80000000) ? "en" : "dis"); break; case CPU_20KC: case CPU_25KF: -- GitLab From fe00f943e0ef98b4057abcc2940d631a975b43cd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 1 Mar 2005 19:22:29 +0000 Subject: [PATCH 0962/1519] Sparseify MIPS. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 15 + arch/mips/kernel/i8259.c | 2 +- arch/mips/kernel/irixelf.c | 14 +- arch/mips/kernel/irixinv.c | 7 +- arch/mips/kernel/irixsig.c | 408 +++++++++++++------------ arch/mips/kernel/process.c | 8 - arch/mips/kernel/ptrace.c | 4 +- arch/mips/kernel/signal.c | 14 +- arch/mips/kernel/sysirix.c | 479 +++++++++++++++--------------- arch/mips/kernel/traps.c | 21 +- arch/mips/kernel/unaligned.c | 10 +- arch/mips/lib/csum_partial_copy.c | 2 +- arch/mips/mm/c-r4k.c | 7 +- arch/mips/mm/cache.c | 9 +- arch/mips/mm/fault.c | 4 +- include/asm-mips/cacheflush.h | 3 +- include/asm-mips/checksum.h | 5 +- include/asm-mips/io.h | 18 +- include/asm-mips/irq.h | 4 +- include/asm-mips/sibyte/sb1250.h | 2 +- include/asm-mips/uaccess.h | 156 +++++----- 21 files changed, 607 insertions(+), 585 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 99da8a2850c7..393c33c0faad 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -52,6 +52,21 @@ ifdef CONFIG_CROSSCOMPILE CROSS_COMPILE := $(tool-prefix) endif +CHECKFLAGS-y += -D__linux__ -D__mips__ \ + -D_ABIO32=1 \ + -D_ABIN32=2 \ + -D_ABI64=3 +CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \ + -D_MIPS_SZLONG=32 \ + -D__PTRDIFF_TYPE__=int +CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \ + -D_MIPS_SZLONG=64 \ + -D__PTRDIFF_TYPE__="long int" +CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__ +CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__ + +CHECKFLAGS = $(CHECKFLAGS-y) + ifdef CONFIG_BUILD_ELF64 gas-abi = 64 ld-emul = $(64bit-emul) diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index bb31370cd390..a7d2aac46eea 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -321,7 +321,7 @@ void __init init_i8259_irqs (void) for (i = 0; i < 16; i++) { irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = 0; + irq_desc[i].action = NULL; irq_desc[i].depth = 1; irq_desc[i].handler = &i8259A_irq_type; } diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c index 881f125eecb4..5aeacc1ffb24 100644 --- a/arch/mips/kernel/irixelf.c +++ b/arch/mips/kernel/irixelf.c @@ -147,7 +147,7 @@ static void padzero(unsigned long elf_bss) nbyte = elf_bss & (PAGE_SIZE-1); if (nbyte) { nbyte = PAGE_SIZE - nbyte; - clear_user((void *) elf_bss, nbyte); + clear_user((void __user *) elf_bss, nbyte); } } @@ -878,10 +878,10 @@ static int load_irix_library(struct file *file) * phdrs there are in the USER_PHDRP array. We return the vaddr the * first phdr was successfully mapped to. */ -unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt) +unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt) { unsigned long type, vaddr, filesz, offset, flags; - struct elf_phdr *hp; + struct elf_phdr __user *hp; struct file *filp; int i, retval; @@ -968,9 +968,9 @@ unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt) /* These are the only things you should do on a core-file: use only these * functions to write out all the necessary info. */ -static int dump_write(struct file *file, const void *addr, int nr) +static int dump_write(struct file *file, const void __user *addr, int nr) { - return file->f_op->write(file, (const char *) addr, nr, &file->f_pos) == nr; + return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr; } static int dump_seek(struct file *file, off_t off) @@ -1204,7 +1204,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) len = current->mm->arg_end - current->mm->arg_start; len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len; (void *) copy_from_user(&psinfo.pr_psargs, - (const char *)current->mm->arg_start, len); + (const char __user *)current->mm->arg_start, len); for (i = 0; i < len; i++) if (psinfo.pr_psargs[i] == 0) psinfo.pr_psargs[i] = ' '; @@ -1301,7 +1301,7 @@ static int irix_core_dump(long signr, struct pt_regs * regs, struct file *file) #ifdef DEBUG printk("elf_core_dump: writing %08lx %lx\n", addr, len); #endif - DUMP_WRITE((void *)addr, len); + DUMP_WRITE((void __user *)addr, len); } if ((off_t) file->f_pos != offset) { diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c index 60aa98cd1791..de8584f62311 100644 --- a/arch/mips/kernel/irixinv.c +++ b/arch/mips/kernel/irixinv.c @@ -30,10 +30,10 @@ void add_to_inventory (int class, int type, int controller, int unit, int state) inventory_items++; } -int dump_inventory_to_user (void *userbuf, int size) +int dump_inventory_to_user (void __user *userbuf, int size) { inventory_t *inv = &inventory [0]; - inventory_t *user = userbuf; + inventory_t __user *user = userbuf; int v; if (!access_ok(VERIFY_WRITE, userbuf, size)) @@ -41,7 +41,8 @@ int dump_inventory_to_user (void *userbuf, int size) for (v = 0; v < inventory_items; v++){ inv = &inventory [v]; - copy_to_user (user, inv, sizeof (inventory_t)); + if (copy_to_user (user, inv, sizeof (inventory_t))) + return -EFAULT; user++; } return inventory_items * sizeof (inventory_t); diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index eff89322ba50..908e63684208 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -76,36 +76,39 @@ static inline void dump_irix5_sigctx(struct sigctx_irix5 *c) } #endif -static void setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs, - int signr, sigset_t *oldmask) +static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs, + int signr, sigset_t *oldmask) { + struct sigctx_irix5 __user *ctx; unsigned long sp; - struct sigctx_irix5 *ctx; - int i; + int error, i; sp = regs->regs[29]; sp -= sizeof(struct sigctx_irix5); sp &= ~(0xf); - ctx = (struct sigctx_irix5 *) sp; + ctx = (struct sigctx_irix5 __user *) sp; if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))) goto segv_and_exit; - __put_user(0, &ctx->weird_fpu_thing); - __put_user(~(0x00000001), &ctx->rmask); - __put_user(0, &ctx->regs[0]); + error = __put_user(0, &ctx->weird_fpu_thing); + error |= __put_user(~(0x00000001), &ctx->rmask); + error |= __put_user(0, &ctx->regs[0]); for(i = 1; i < 32; i++) - __put_user((u64) regs->regs[i], &ctx->regs[i]); + error |= __put_user((u64) regs->regs[i], &ctx->regs[i]); + + error |= __put_user((u64) regs->hi, &ctx->hi); + error |= __put_user((u64) regs->lo, &ctx->lo); + error |= __put_user((u64) regs->cp0_epc, &ctx->pc); + error |= __put_user(!!used_math(), &ctx->usedfp); + error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause); + error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr); - __put_user((u64) regs->hi, &ctx->hi); - __put_user((u64) regs->lo, &ctx->lo); - __put_user((u64) regs->cp0_epc, &ctx->pc); - __put_user(!!used_math(), &ctx->usedfp); - __put_user((u64) regs->cp0_cause, &ctx->cp0_cause); - __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr); + error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */ - __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */ + error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0; - __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)); + if (error) + goto segv_and_exit; #ifdef DEBUG_SIG dump_irix5_sigctx(ctx); @@ -117,13 +120,14 @@ static void setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs, regs->regs[7] = (unsigned long) ka->sa.sa_handler; regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer; - return; + return 1; segv_and_exit: force_sigsegv(signr, current); + return 0; } -static void inline +static int inline setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *oldmask, siginfo_t *info) { @@ -131,9 +135,11 @@ setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, do_exit(SIGSEGV); } -static inline void handle_signal(unsigned long sig, siginfo_t *info, +static inline int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) { + int ret; + switch(regs->regs[0]) { case ERESTARTNOHAND: regs->regs[2] = EINTR; @@ -151,9 +157,9 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info, regs->regs[0] = 0; /* Don't deal with this again. */ if (ka->sa.sa_flags & SA_SIGINFO) - setup_irix_rt_frame(ka, regs, sig, oldset, info); + ret = setup_irix_rt_frame(ka, regs, sig, oldset, info); else - setup_irix_frame(ka, regs, sig, oldset); + ret = setup_irix_frame(ka, regs, sig, oldset); spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); @@ -161,6 +167,8 @@ static inline void handle_signal(unsigned long sig, siginfo_t *info, sigaddset(¤t->blocked,sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); + + return ret; } asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs) @@ -184,10 +192,8 @@ asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs) oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) { - handle_signal(signr, &info, &ka, oldset, regs); - return 1; - } + if (signr > 0) + return handle_signal(signr, &info, &ka, oldset, regs); no_signal: /* @@ -208,10 +214,11 @@ asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs) asmlinkage void irix_sigreturn(struct pt_regs *regs) { - struct sigctx_irix5 *context, *magic; + struct sigctx_irix5 __user *context, *magic; unsigned long umask, mask; u64 *fregs; - int sig, i, base = 0; + u32 usedfp; + int error, sig, i, base = 0; sigset_t blocked; /* Always make any pending restarted system calls return -EINTR */ @@ -220,8 +227,8 @@ irix_sigreturn(struct pt_regs *regs) if (regs->regs[2] == 1000) base = 1; - context = (struct sigctx_irix5 *) regs->regs[base + 4]; - magic = (struct sigctx_irix5 *) regs->regs[base + 5]; + context = (struct sigctx_irix5 __user *) regs->regs[base + 4]; + magic = (struct sigctx_irix5 __user *) regs->regs[base + 5]; sig = (int) regs->regs[base + 6]; #ifdef DEBUG_SIG printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n", @@ -236,25 +243,31 @@ irix_sigreturn(struct pt_regs *regs) dump_irix5_sigctx(context); #endif - __get_user(regs->cp0_epc, &context->pc); - umask = context->rmask; mask = 2; + error = __get_user(regs->cp0_epc, &context->pc); + error |= __get_user(umask, &context->rmask); + + mask = 2; for (i = 1; i < 32; i++, mask <<= 1) { - if(umask & mask) - __get_user(regs->regs[i], &context->regs[i]); + if (umask & mask) + error |= __get_user(regs->regs[i], &context->regs[i]); } - __get_user(regs->hi, &context->hi); - __get_user(regs->lo, &context->lo); + error |= __get_user(regs->hi, &context->hi); + error |= __get_user(regs->lo, &context->lo); - if ((umask & 1) && context->usedfp) { + error |= __get_user(usedfp, &context->usedfp); + if ((umask & 1) && usedfp) { fregs = (u64 *) ¤t->thread.fpu; + for(i = 0; i < 32; i++) - fregs[i] = (u64) context->fpregs[i]; - __get_user(current->thread.fpu.hard.fcr31, &context->fpcsr); + error |= __get_user(fregs[i], &context->fpregs[i]); + error |= __get_user(current->thread.fpu.hard.fcr31, &context->fpcsr); } /* XXX do sigstack crapola here... XXX */ - if (__copy_from_user(&blocked, &context->sigset, sizeof(blocked))) + error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0; + + if (error) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); @@ -296,8 +309,8 @@ static inline void dump_sigact_irix5(struct sigact_irix5 *p) #endif asmlinkage int -irix_sigaction(int sig, const struct sigaction *act, - struct sigaction *oact, void *trampoline) +irix_sigaction(int sig, const struct sigaction __user *act, + struct sigaction __user *oact, void __user *trampoline) { struct k_sigaction new_ka, old_ka; int ret; @@ -311,12 +324,16 @@ irix_sigaction(int sig, const struct sigaction *act, #endif if (act) { sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_flags, &act->sa_flags)) + int err; + + if (!access_ok(VERIFY_READ, act, sizeof(*act))) return -EFAULT; + err = __get_user(new_ka.sa.sa_handler, &act->sa_handler); + err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)); + err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0; + if (err) + return err; /* * Hmmm... methinks IRIX libc always passes a valid trampoline @@ -330,30 +347,37 @@ irix_sigaction(int sig, const struct sigaction *act, ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_flags, &oact->sa_flags)) + int err; + + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact))) + return -EFAULT; + + err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler); + err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask, + sizeof(sigset_t)) ? -EFAULT : 0; + if (err) return -EFAULT; - __copy_to_user(&old_ka.sa.sa_mask, &oact->sa_mask, - sizeof(sigset_t)); } return ret; } -asmlinkage int irix_sigpending(irix_sigset_t *set) +asmlinkage int irix_sigpending(irix_sigset_t __user *set) { return do_sigpending(set, sizeof(*set)); } -asmlinkage int irix_sigprocmask(int how, irix_sigset_t *new, irix_sigset_t *old) +asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new, + irix_sigset_t __user *old) { sigset_t oldbits, newbits; if (new) { if (!access_ok(VERIFY_READ, new, sizeof(*new))) return -EFAULT; - __copy_from_user(&newbits, new, sizeof(unsigned long)*4); + if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4)) + return -EFAULT; sigdelsetmask(&newbits, ~_BLOCKABLE); spin_lock_irq(¤t->sighand->siglock); @@ -381,20 +405,19 @@ asmlinkage int irix_sigprocmask(int how, irix_sigset_t *new, irix_sigset_t *old) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); } - if(old) { - if (!access_ok(VERIFY_WRITE, old, sizeof(*old))) - return -EFAULT; - __copy_to_user(old, ¤t->blocked, sizeof(unsigned long)*4); - } + if (old) + return copy_to_user(old, ¤t->blocked, + sizeof(unsigned long)*4) ? -EFAULT : 0; return 0; } asmlinkage int irix_sigsuspend(struct pt_regs *regs) { - sigset_t *uset, saveset, newset; + sigset_t saveset, newset; + sigset_t __user *uset; - uset = (sigset_t *) regs->regs[4]; + uset = (sigset_t __user *) regs->regs[4]; if (copy_from_user(&newset, uset, sizeof(sigset_t))) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); @@ -440,12 +463,13 @@ struct irix5_siginfo { } stuff; }; -asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info, - struct timespec *tp) +asmlinkage int irix_sigpoll_sys(unsigned long __user *set, + struct irix5_siginfo __user *info, struct timespec __user *tp) { long expire = MAX_SCHEDULE_TIMEOUT; sigset_t kset; int i, sig, error, timeo = 0; + struct timespec ktp; #ifdef DEBUG_SIG printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n", @@ -456,14 +480,8 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info, if (!set) return -EINVAL; - if (!access_ok(VERIFY_READ, set, sizeof(kset))) { - error = -EFAULT; - goto out; - } - - __copy_from_user(&kset, set, sizeof(set)); - if (error) - goto out; + if (copy_from_user(&kset, set, sizeof(set))) + return -EFAULT; if (info && clear_user(info, sizeof(*info))) { error = -EFAULT; @@ -471,19 +489,21 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info, } if (tp) { - if (!access_ok(VERIFY_READ, tp, sizeof(*tp))) + if (copy_from_user(&ktp, tp, sizeof(*tp))) return -EFAULT; - if (!tp->tv_sec && !tp->tv_nsec) { - error = -EINVAL; - goto out; - } - expire = timespec_to_jiffies(tp) + (tp->tv_sec||tp->tv_nsec); + + if (!ktp.tv_sec && !ktp.tv_nsec) + return -EINVAL; + + expire = timespec_to_jiffies(&ktp) + + (ktp.tv_sec || ktp.tv_nsec); } while(1) { long tmp = 0; - expire = schedule_timeout_interruptible(expire); + current->state = TASK_INTERRUPTIBLE; + expire = schedule_timeout(expire); for (i=0; i<=4; i++) tmp |= (current->pending.signal.sig[i] & kset.sig[i]); @@ -500,15 +520,14 @@ asmlinkage int irix_sigpoll_sys(unsigned long *set, struct irix5_siginfo *info, if (timeo) return -EAGAIN; - for(sig = 1; i <= 65 /* IRIX_NSIG */; sig++) { + for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) { if (sigismember (&kset, sig)) continue; if (sigismember (¤t->pending.signal, sig)) { /* XXX need more than this... */ if (info) - info->sig = sig; - error = 0; - goto out; + return copy_to_user(&info->sig, &sig, sizeof(sig)); + return 0; } } @@ -534,8 +553,9 @@ extern int getrusage(struct task_struct *, int, struct rusage __user *); #define W_MASK (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG) -asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info, - int options, struct rusage *ru) +asmlinkage int irix_waitsys(int type, int pid, + struct irix5_siginfo __user *info, int options, + struct rusage __user *ru) { int flag, retval; DECLARE_WAITQUEUE(wait, current); @@ -543,28 +563,22 @@ asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info, struct task_struct *p; struct list_head *_p; - if (!info) { - retval = -EINVAL; - goto out; - } - if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) { - retval = -EFAULT; - goto out; - } - if (ru) { - if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru))) { - retval = -EFAULT; - goto out; - } - } - if (options & ~(W_MASK)) { - retval = -EINVAL; - goto out; - } - if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL) { - retval = -EINVAL; - goto out; - } + if (!info) + return -EINVAL; + + if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) + return -EFAULT; + + if (ru) + if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru))) + return -EFAULT; + + if (options & ~W_MASK) + return -EINVAL; + + if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL) + return -EINVAL; + add_wait_queue(¤t->signal->wait_chldexit, &wait); repeat: flag = 0; @@ -595,18 +609,20 @@ asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info, add_parent(p, p->parent); write_unlock_irq(&tasklist_lock); retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0; - if (!retval && ru) { - retval |= __put_user(SIGCHLD, &info->sig); - retval |= __put_user(0, &info->code); - retval |= __put_user(p->pid, &info->stuff.procinfo.pid); - retval |= __put_user((p->exit_code >> 8) & 0xff, - &info->stuff.procinfo.procdata.child.status); - retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime); - retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime); - } - if (!retval) { - p->exit_code = 0; - } + if (retval) + goto end_waitsys; + + retval = __put_user(SIGCHLD, &info->sig); + retval |= __put_user(0, &info->code); + retval |= __put_user(p->pid, &info->stuff.procinfo.pid); + retval |= __put_user((p->exit_code >> 8) & 0xff, + &info->stuff.procinfo.procdata.child.status); + retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime); + retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime); + if (retval) + goto end_waitsys; + + p->exit_code = 0; goto end_waitsys; case EXIT_ZOMBIE: @@ -614,16 +630,18 @@ asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info, current->signal->cstime += p->stime + p->signal->cstime; if (ru != NULL) getrusage(p, RUSAGE_BOTH, ru); - __put_user(SIGCHLD, &info->sig); - __put_user(1, &info->code); /* CLD_EXITED */ - __put_user(p->pid, &info->stuff.procinfo.pid); - __put_user((p->exit_code >> 8) & 0xff, + retval = __put_user(SIGCHLD, &info->sig); + retval |= __put_user(1, &info->code); /* CLD_EXITED */ + retval |= __put_user(p->pid, &info->stuff.procinfo.pid); + retval |= __put_user((p->exit_code >> 8) & 0xff, &info->stuff.procinfo.procdata.child.status); - __put_user(p->utime, + retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime); - __put_user(p->stime, + retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime); - retval = 0; + if (retval) + return retval; + if (p->real_parent != p->parent) { write_lock_irq(&tasklist_lock); remove_parent(p); @@ -656,7 +674,6 @@ asmlinkage int irix_waitsys(int type, int pid, struct irix5_siginfo *info, current->state = TASK_RUNNING; remove_wait_queue(¤t->signal->wait_chldexit, &wait); -out: return retval; } @@ -675,39 +692,39 @@ struct irix5_context { asmlinkage int irix_getcontext(struct pt_regs *regs) { - int i, base = 0; - struct irix5_context *ctx; + int error, i, base = 0; + struct irix5_context __user *ctx; unsigned long flags; if (regs->regs[2] == 1000) base = 1; - ctx = (struct irix5_context *) regs->regs[base + 4]; + ctx = (struct irix5_context __user *) regs->regs[base + 4]; #ifdef DEBUG_SIG printk("[%s:%d] irix_getcontext(%p)\n", current->comm, current->pid, ctx); #endif - if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))) + if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))); return -EFAULT; - __put_user(current->thread.irix_oldctx, &ctx->link); + error = __put_user(current->thread.irix_oldctx, &ctx->link); - __copy_to_user(&ctx->sigmask, ¤t->blocked, sizeof(irix_sigset_t)); + error |= __copy_to_user(&ctx->sigmask, ¤t->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0; /* XXX Do sigstack stuff someday... */ - __put_user(0, &ctx->stack.sp); - __put_user(0, &ctx->stack.size); - __put_user(0, &ctx->stack.flags); + error |= __put_user(0, &ctx->stack.sp); + error |= __put_user(0, &ctx->stack.size); + error |= __put_user(0, &ctx->stack.flags); - __put_user(0, &ctx->weird_graphics_thing); - __put_user(0, &ctx->regs[0]); + error |= __put_user(0, &ctx->weird_graphics_thing); + error |= __put_user(0, &ctx->regs[0]); for (i = 1; i < 32; i++) - __put_user(regs->regs[i], &ctx->regs[i]); - __put_user(regs->lo, &ctx->regs[32]); - __put_user(regs->hi, &ctx->regs[33]); - __put_user(regs->cp0_cause, &ctx->regs[34]); - __put_user(regs->cp0_epc, &ctx->regs[35]); + error |= __put_user(regs->regs[i], &ctx->regs[i]); + error |= __put_user(regs->lo, &ctx->regs[32]); + error |= __put_user(regs->hi, &ctx->regs[33]); + error |= __put_user(regs->cp0_cause, &ctx->regs[34]); + error |= __put_user(regs->cp0_epc, &ctx->regs[35]); flags = 0x0f; if (!used_math()) { @@ -716,119 +733,124 @@ asmlinkage int irix_getcontext(struct pt_regs *regs) /* XXX wheee... */ printk("Wheee, no code for saving IRIX FPU context yet.\n"); } - __put_user(flags, &ctx->flags); + error |= __put_user(flags, &ctx->flags); - return 0; + return error; } -asmlinkage unsigned long irix_setcontext(struct pt_regs *regs) +asmlinkage void irix_setcontext(struct pt_regs *regs) { - int error, base = 0; - struct irix5_context *ctx; + struct irix5_context __user *ctx; + int err, base = 0; + u32 flags; - if(regs->regs[2] == 1000) + if (regs->regs[2] == 1000) base = 1; - ctx = (struct irix5_context *) regs->regs[base + 4]; + ctx = (struct irix5_context __user *) regs->regs[base + 4]; #ifdef DEBUG_SIG printk("[%s:%d] irix_setcontext(%p)\n", current->comm, current->pid, ctx); #endif - if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))) { - error = -EFAULT; - goto out; - } + if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))) + goto segv_and_exit; - if (ctx->flags & 0x02) { + err = __get_user(flags, &ctx->flags); + if (flags & 0x02) { /* XXX sigstack garbage, todo... */ printk("Wheee, cannot do sigstack stuff in setcontext\n"); } - if (ctx->flags & 0x04) { + if (flags & 0x04) { int i; /* XXX extra control block stuff... todo... */ - for(i = 1; i < 32; i++) - regs->regs[i] = ctx->regs[i]; - regs->lo = ctx->regs[32]; - regs->hi = ctx->regs[33]; - regs->cp0_epc = ctx->regs[35]; + for (i = 1; i < 32; i++) + err |= __get_user(regs->regs[i], &ctx->regs[i]); + err |= __get_user(regs->lo, &ctx->regs[32]); + err |= __get_user(regs->hi, &ctx->regs[33]); + err |= __get_user(regs->cp0_epc, &ctx->regs[35]); } - if (ctx->flags & 0x08) { + if (flags & 0x08) /* XXX fpu context, blah... */ - printk("Wheee, cannot restore FPU context yet...\n"); - } - current->thread.irix_oldctx = ctx->link; - error = regs->regs[2]; + printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n"); -out: - return error; + err |= __get_user(current->thread.irix_oldctx, &ctx->link); + if (err) + goto segv_and_exit; + + /* + * Don't let your children do this ... + */ + if (current_thread_info()->flags & TIF_SYSCALL_TRACE) + do_syscall_trace(regs, 1); + __asm__ __volatile__( + "move\t$29,%0\n\t" + "j\tsyscall_exit" + :/* no outputs */ + :"r" (®s)); + /* Unreached */ + +segv_and_exit: + force_sigsegv(SIGSEGV, current); } -struct irix_sigstack { unsigned long sp; int status; }; +struct irix_sigstack { + unsigned long sp; + int status; +}; -asmlinkage int irix_sigstack(struct irix_sigstack *new, struct irix_sigstack *old) +asmlinkage int irix_sigstack(struct irix_sigstack __user *new, + struct irix_sigstack __user *old) { - int error = -EFAULT; - #ifdef DEBUG_SIG printk("[%s:%d] irix_sigstack(%p,%p)\n", current->comm, current->pid, new, old); #endif - if(new) { + if (new) { if (!access_ok(VERIFY_READ, new, sizeof(*new))) - goto out; + return -EFAULT; } - if(old) { + if (old) { if (!access_ok(VERIFY_WRITE, old, sizeof(*old))) - goto out; + return -EFAULT; } - error = 0; -out: - return error; + return 0; } struct irix_sigaltstack { unsigned long sp; int size; int status; }; -asmlinkage int irix_sigaltstack(struct irix_sigaltstack *new, - struct irix_sigaltstack *old) +asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new, + struct irix_sigaltstack __user *old) { - int error = -EFAULT; - #ifdef DEBUG_SIG printk("[%s:%d] irix_sigaltstack(%p,%p)\n", current->comm, current->pid, new, old); #endif - if (new) { + if (new) if (!access_ok(VERIFY_READ, new, sizeof(*new))) - goto out; - } + return -EFAULT; if (old) { if (!access_ok(VERIFY_WRITE, old, sizeof(*old))) - goto out; + return -EFAULT; } - error = 0; - -out: - error = 0; - return error; + return 0; } struct irix_procset { int cmd, ltype, lid, rtype, rid; }; -asmlinkage int irix_sigsendset(struct irix_procset *pset, int sig) +asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig) { if (!access_ok(VERIFY_READ, pset, sizeof(*pset))) return -EFAULT; - #ifdef DEBUG_SIG printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n", current->comm, current->pid, diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index f99efce556ea..5223c4450e4c 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -38,14 +38,6 @@ #include #include -/* - * We use this if we don't have any better idle routine.. - * (This to kill: kernel/platform.c. - */ -void default_idle (void) -{ -} - /* * The idle thread. There's no useful work to be done, so just try to conserve * power and have a low exit latency (ie sit in a loop waiting for somebody to diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 0b571a5b4b83..2c7fc7472fb2 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -103,7 +103,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; if (copied != sizeof(tmp)) break; - ret = put_user(tmp,(unsigned long *) data); + ret = put_user(tmp,(unsigned long __user *) data); break; } @@ -180,7 +180,7 @@ asmlinkage int sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; goto out_tsk; } - ret = put_user(tmp, (unsigned long *) data); + ret = put_user(tmp, (unsigned long __user *) data); break; } diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 0209c1dd1429..eb127230cc9a 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -47,9 +47,10 @@ save_static_function(sys_sigsuspend); __attribute_used__ noinline static int _sys_sigsuspend(nabi_no_regargs struct pt_regs regs) { - sigset_t *uset, saveset, newset; + sigset_t saveset, newset; + sigset_t __user *uset; - uset = (sigset_t *) regs.regs[4]; + uset = (sigset_t __user *) regs.regs[4]; if (copy_from_user(&newset, uset, sizeof(sigset_t))) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); @@ -75,7 +76,8 @@ save_static_function(sys_rt_sigsuspend); __attribute_used__ noinline static int _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) { - sigset_t *unewset, saveset, newset; + sigset_t saveset, newset; + sigset_t __user *unewset; size_t sigsetsize; /* XXX Don't preclude handling different sized sigset_t's. */ @@ -83,7 +85,7 @@ _sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) if (sigsetsize != sizeof(sigset_t)) return -EINVAL; - unewset = (sigset_t *) regs.regs[4]; + unewset = (sigset_t __user *) regs.regs[4]; if (copy_from_user(&newset, unewset, sizeof(newset))) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); @@ -147,8 +149,8 @@ asmlinkage int sys_sigaction(int sig, const struct sigaction *act, asmlinkage int sys_sigaltstack(nabi_no_regargs struct pt_regs regs) { - const stack_t *uss = (const stack_t *) regs.regs[4]; - stack_t *uoss = (stack_t *) regs.regs[5]; + const stack_t __user *uss = (const stack_t __user *) regs.regs[4]; + stack_t __user *uoss = (stack_t __user *) regs.regs[5]; unsigned long usp = regs.regs[29]; return do_sigaltstack(uss, uoss, usp); diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c index ed7c0e3c2f85..52924f8ce23c 100644 --- a/arch/mips/kernel/sysirix.c +++ b/arch/mips/kernel/sysirix.c @@ -233,7 +233,7 @@ asmlinkage int irix_prctl(unsigned option, ...) #undef DEBUG_PROCGRPS -extern unsigned long irix_mapelf(int fd, struct elf_phdr *user_phdrp, int cnt); +extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt); extern int getrusage(struct task_struct *p, int who, struct rusage __user *ru); extern char *prom_getenv(char *name); extern long prom_setenv(char *name, char *value); @@ -270,23 +270,19 @@ asmlinkage int irix_syssgi(struct pt_regs *regs) cmd = regs->regs[base + 4]; switch(cmd) { case SGI_SYSID: { - char *buf = (char *) regs->regs[base + 5]; + char __user *buf = (char __user *) regs->regs[base + 5]; /* XXX Use ethernet addr.... */ - retval = clear_user(buf, 64); + retval = clear_user(buf, 64) ? -EFAULT : 0; break; } #if 0 case SGI_RDNAME: { int pid = (int) regs->regs[base + 5]; - char *buf = (char *) regs->regs[base + 6]; + char __user *buf = (char __user *) regs->regs[base + 6]; struct task_struct *p; char tcomm[sizeof(current->comm)]; - if (!access_ok(VERIFY_WRITE, buf, sizeof(tcomm))) { - retval = -EFAULT; - break; - } read_lock(&tasklist_lock); p = find_task_by_pid(pid); if (!p) { @@ -298,34 +294,28 @@ asmlinkage int irix_syssgi(struct pt_regs *regs) read_unlock(&tasklist_lock); /* XXX Need to check sizes. */ - copy_to_user(buf, tcomm, sizeof(tcomm)); - retval = 0; + retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0; break; } case SGI_GETNVRAM: { - char *name = (char *) regs->regs[base+5]; - char *buf = (char *) regs->regs[base+6]; + char __user *name = (char __user *) regs->regs[base+5]; + char __user *buf = (char __user *) regs->regs[base+6]; char *value; return -EINVAL; /* til I fix it */ - if (!access_ok(VERIFY_WRITE, buf, 128)) { - retval = -EFAULT; - break; - } value = prom_getenv(name); /* PROM lock? */ if (!value) { retval = -EINVAL; break; } /* Do I strlen() for the length? */ - copy_to_user(buf, value, 128); - retval = 0; + retval = copy_to_user(buf, value, 128) ? -EFAULT : 0; break; } case SGI_SETNVRAM: { - char *name = (char *) regs->regs[base+5]; - char *value = (char *) regs->regs[base+6]; + char __user *name = (char __user *) regs->regs[base+5]; + char __user *value = (char __user *) regs->regs[base+6]; return -EINVAL; /* til I fix it */ retval = prom_setenv(name, value); /* XXX make sure retval conforms to syssgi(2) */ @@ -401,16 +391,16 @@ asmlinkage int irix_syssgi(struct pt_regs *regs) case SGI_SETGROUPS: retval = sys_setgroups((int) regs->regs[base + 5], - (gid_t *) regs->regs[base + 6]); + (gid_t __user *) regs->regs[base + 6]); break; case SGI_GETGROUPS: retval = sys_getgroups((int) regs->regs[base + 5], - (gid_t *) regs->regs[base + 6]); + (gid_t __user *) regs->regs[base + 6]); break; case SGI_RUSAGE: { - struct rusage *ru = (struct rusage *) regs->regs[base + 6]; + struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6]; switch((int) regs->regs[base + 5]) { case 0: @@ -447,7 +437,7 @@ asmlinkage int irix_syssgi(struct pt_regs *regs) case SGI_ELFMAP: retval = irix_mapelf((int) regs->regs[base + 5], - (struct elf_phdr *) regs->regs[base + 6], + (struct elf_phdr __user *) regs->regs[base + 6], (int) regs->regs[base + 7]); break; @@ -462,24 +452,24 @@ asmlinkage int irix_syssgi(struct pt_regs *regs) case SGI_PHYSP: { unsigned long addr = regs->regs[base + 5]; - int *pageno = (int *) (regs->regs[base + 6]); + int __user *pageno = (int __user *) (regs->regs[base + 6]); struct mm_struct *mm = current->mm; pgd_t *pgdp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; - if (!access_ok(VERIFY_WRITE, pageno, sizeof(int))) - return -EFAULT; - down_read(&mm->mmap_sem); pgdp = pgd_offset(mm, addr); - pmdp = pmd_offset(pgdp, addr); + pudp = pud_offset(pgdp, addr); + pmdp = pmd_offset(pudp, addr); ptep = pte_offset(pmdp, addr); retval = -EINVAL; if (ptep) { pte_t pte = *ptep; if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) { + /* b0rked on 64-bit */ retval = put_user((pte_val(pte) & PAGE_MASK) >> PAGE_SHIFT, pageno); } @@ -490,7 +480,7 @@ asmlinkage int irix_syssgi(struct pt_regs *regs) case SGI_INVENT: { int arg1 = (int) regs->regs [base + 5]; - void *buffer = (void *) regs->regs [base + 6]; + void __user *buffer = (void __user *) regs->regs [base + 6]; int count = (int) regs->regs [base + 7]; switch (arg1) { @@ -686,8 +676,8 @@ asmlinkage int irix_pause(void) } /* XXX need more than this... */ -asmlinkage int irix_mount(char *dev_name, char *dir_name, unsigned long flags, - char *type, void *data, int datalen) +asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name, + unsigned long flags, char __user *type, void __user *data, int datalen) { printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n", current->comm, current->pid, @@ -702,8 +692,8 @@ struct irix_statfs { char f_fname[6], f_fpack[6]; }; -asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf, - int len, int fs_type) +asmlinkage int irix_statfs(const char __user *path, + struct irix_statfs __user *buf, int len, int fs_type) { struct nameidata nd; struct kstatfs kbuf; @@ -718,6 +708,7 @@ asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf, error = -EFAULT; goto out; } + error = user_path_walk(path, &nd); if (error) goto out; @@ -726,18 +717,17 @@ asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf, if (error) goto dput_and_out; - __put_user(kbuf.f_type, &buf->f_type); - __put_user(kbuf.f_bsize, &buf->f_bsize); - __put_user(kbuf.f_frsize, &buf->f_frsize); - __put_user(kbuf.f_blocks, &buf->f_blocks); - __put_user(kbuf.f_bfree, &buf->f_bfree); - __put_user(kbuf.f_files, &buf->f_files); - __put_user(kbuf.f_ffree, &buf->f_ffree); + error = __put_user(kbuf.f_type, &buf->f_type); + error |= __put_user(kbuf.f_bsize, &buf->f_bsize); + error |= __put_user(kbuf.f_frsize, &buf->f_frsize); + error |= __put_user(kbuf.f_blocks, &buf->f_blocks); + error |= __put_user(kbuf.f_bfree, &buf->f_bfree); + error |= __put_user(kbuf.f_files, &buf->f_files); + error |= __put_user(kbuf.f_ffree, &buf->f_ffree); for (i = 0; i < 6; i++) { - __put_user(0, &buf->f_fname[i]); - __put_user(0, &buf->f_fpack[i]); + error |= __put_user(0, &buf->f_fname[i]); + error |= __put_user(0, &buf->f_fpack[i]); } - error = 0; dput_and_out: path_release(&nd); @@ -745,7 +735,7 @@ asmlinkage int irix_statfs(const char *path, struct irix_statfs *buf, return error; } -asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf) +asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf) { struct kstatfs kbuf; struct file *file; @@ -755,6 +745,7 @@ asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf) error = -EFAULT; goto out; } + if (!(file = fget(fd))) { error = -EBADF; goto out; @@ -764,16 +755,17 @@ asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs *buf) if (error) goto out_f; - __put_user(kbuf.f_type, &buf->f_type); - __put_user(kbuf.f_bsize, &buf->f_bsize); - __put_user(kbuf.f_frsize, &buf->f_frsize); - __put_user(kbuf.f_blocks, &buf->f_blocks); - __put_user(kbuf.f_bfree, &buf->f_bfree); - __put_user(kbuf.f_files, &buf->f_files); - __put_user(kbuf.f_ffree, &buf->f_ffree); - for(i = 0; i < 6; i++) { - __put_user(0, &buf->f_fname[i]); - __put_user(0, &buf->f_fpack[i]); + error = __put_user(kbuf.f_type, &buf->f_type); + error |= __put_user(kbuf.f_bsize, &buf->f_bsize); + error |= __put_user(kbuf.f_frsize, &buf->f_frsize); + error |= __put_user(kbuf.f_blocks, &buf->f_blocks); + error |= __put_user(kbuf.f_bfree, &buf->f_bfree); + error |= __put_user(kbuf.f_files, &buf->f_files); + error |= __put_user(kbuf.f_ffree, &buf->f_ffree); + + for (i = 0; i < 6; i++) { + error |= __put_user(0, &buf->f_fname[i]); + error |= __put_user(0, &buf->f_fpack[i]); } out_f: @@ -800,14 +792,15 @@ asmlinkage int irix_setpgrp(int flags) return error; } -asmlinkage int irix_times(struct tms * tbuf) +asmlinkage int irix_times(struct tms __user *tbuf) { int err = 0; if (tbuf) { if (!access_ok(VERIFY_WRITE,tbuf,sizeof *tbuf)) return -EFAULT; - err |= __put_user(current->utime, &tbuf->tms_utime); + + err = __put_user(current->utime, &tbuf->tms_utime); err |= __put_user(current->stime, &tbuf->tms_stime); err |= __put_user(current->signal->cutime, &tbuf->tms_cutime); err |= __put_user(current->signal->cstime, &tbuf->tms_cstime); @@ -823,13 +816,13 @@ asmlinkage int irix_exec(struct pt_regs *regs) if(regs->regs[2] == 1000) base = 1; - filename = getname((char *) (long)regs->regs[base + 4]); + filename = getname((char __user *) (long)regs->regs[base + 4]); error = PTR_ERR(filename); if (IS_ERR(filename)) return error; - error = do_execve(filename, (char **) (long)regs->regs[base + 5], - (char **) 0, regs); + error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5], + NULL, regs); putname(filename); return error; @@ -842,12 +835,12 @@ asmlinkage int irix_exece(struct pt_regs *regs) if (regs->regs[2] == 1000) base = 1; - filename = getname((char *) (long)regs->regs[base + 4]); + filename = getname((char __user *) (long)regs->regs[base + 4]); error = PTR_ERR(filename); if (IS_ERR(filename)) return error; - error = do_execve(filename, (char **) (long)regs->regs[base + 5], - (char **) (long)regs->regs[base + 6], regs); + error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5], + (char __user * __user *) (long)regs->regs[base + 6], regs); putname(filename); return error; @@ -903,22 +896,17 @@ asmlinkage int irix_socket(int family, int type, int protocol) return sys_socket(family, type, protocol); } -asmlinkage int irix_getdomainname(char *name, int len) +asmlinkage int irix_getdomainname(char __user *name, int len) { - int error; - - if (!access_ok(VERIFY_WRITE, name, len)) - return -EFAULT; + int err; down_read(&uts_sem); if (len > __NEW_UTS_LEN) len = __NEW_UTS_LEN; - error = 0; - if (copy_to_user(name, system_utsname.domainname, len)) - error = -EFAULT; + err = copy_to_user(name, system_utsname.domainname, len) ? -EFAULT : 0; up_read(&uts_sem); - return error; + return err; } asmlinkage unsigned long irix_getpagesize(void) @@ -934,12 +922,13 @@ asmlinkage int irix_msgsys(int opcode, unsigned long arg0, unsigned long arg1, case 0: return sys_msgget((key_t) arg0, (int) arg1); case 1: - return sys_msgctl((int) arg0, (int) arg1, (struct msqid_ds *)arg2); + return sys_msgctl((int) arg0, (int) arg1, + (struct msqid_ds __user *)arg2); case 2: - return sys_msgrcv((int) arg0, (struct msgbuf *) arg1, + return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1, (size_t) arg2, (long) arg3, (int) arg4); case 3: - return sys_msgsnd((int) arg0, (struct msgbuf *) arg1, + return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1, (size_t) arg2, (int) arg3); default: return -EINVAL; @@ -951,12 +940,13 @@ asmlinkage int irix_shmsys(int opcode, unsigned long arg0, unsigned long arg1, { switch (opcode) { case 0: - return do_shmat((int) arg0, (char *)arg1, (int) arg2, + return do_shmat((int) arg0, (char __user *) arg1, (int) arg2, (unsigned long *) arg3); case 1: - return sys_shmctl((int)arg0, (int)arg1, (struct shmid_ds *)arg2); + return sys_shmctl((int)arg0, (int)arg1, + (struct shmid_ds __user *)arg2); case 2: - return sys_shmdt((char *)arg0); + return sys_shmdt((char __user *)arg0); case 3: return sys_shmget((key_t) arg0, (int) arg1, (int) arg2); default: @@ -974,7 +964,7 @@ asmlinkage int irix_semsys(int opcode, unsigned long arg0, unsigned long arg1, case 1: return sys_semget((key_t) arg0, (int) arg1, (int) arg2); case 2: - return sys_semop((int) arg0, (struct sembuf *)arg1, + return sys_semop((int) arg0, (struct sembuf __user *)arg1, (unsigned int) arg2); default: return -EINVAL; @@ -992,15 +982,16 @@ static inline loff_t llseek(struct file *file, loff_t offset, int origin) lock_kernel(); retval = fn(file, offset, origin); unlock_kernel(); + return retval; } asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow, int origin) { - int retval; struct file * file; loff_t offset; + int retval; retval = -EBADF; file = fget(fd); @@ -1025,12 +1016,12 @@ asmlinkage int irix_sginap(int ticks) return 0; } -asmlinkage int irix_sgikopt(char *istring, char *ostring, int len) +asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len) { return -EINVAL; } -asmlinkage int irix_gettimeofday(struct timeval *tv) +asmlinkage int irix_gettimeofday(struct timeval __user *tv) { time_t sec; long nsec, seq; @@ -1071,7 +1062,7 @@ asmlinkage unsigned long irix_mmap32(unsigned long addr, size_t len, int prot, if (max_size > file->f_dentry->d_inode->i_size) { old_pos = sys_lseek (fd, max_size - 1, 0); - sys_write (fd, "", 1); + sys_write (fd, (void __user *) "", 1); sys_lseek (fd, old_pos, 0); } } @@ -1096,7 +1087,7 @@ asmlinkage int irix_madvise(unsigned long addr, int len, int behavior) return -EINVAL; } -asmlinkage int irix_pagelock(char *addr, int len, int op) +asmlinkage int irix_pagelock(char __user *addr, int len, int op) { printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n", current->comm, current->pid, addr, len, op); @@ -1136,7 +1127,7 @@ asmlinkage int irix_BSDsetpgrp(int pid, int pgrp) return error; } -asmlinkage int irix_systeminfo(int cmd, char *buf, int cnt) +asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt) { printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n", current->comm, current->pid, cmd, buf, cnt); @@ -1152,14 +1143,14 @@ struct iuname { char _unused3[257], _unused4[257], _unused5[257]; }; -asmlinkage int irix_uname(struct iuname *buf) +asmlinkage int irix_uname(struct iuname __user *buf) { down_read(&uts_sem); - if (copy_to_user(system_utsname.sysname, buf->sysname, 65) - || copy_to_user(system_utsname.nodename, buf->nodename, 65) - || copy_to_user(system_utsname.release, buf->release, 65) - || copy_to_user(system_utsname.version, buf->version, 65) - || copy_to_user(system_utsname.machine, buf->machine, 65)) { + if (copy_from_user(system_utsname.sysname, buf->sysname, 65) + || copy_from_user(system_utsname.nodename, buf->nodename, 65) + || copy_from_user(system_utsname.release, buf->release, 65) + || copy_from_user(system_utsname.version, buf->version, 65) + || copy_from_user(system_utsname.machine, buf->machine, 65)) { return -EFAULT; } up_read(&uts_sem); @@ -1169,7 +1160,7 @@ asmlinkage int irix_uname(struct iuname *buf) #undef DEBUG_XSTAT -static int irix_xstat32_xlate(struct kstat *stat, void *ubuf) +static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf) { struct xstat32 { u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid; @@ -1209,7 +1200,7 @@ static int irix_xstat32_xlate(struct kstat *stat, void *ubuf) return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0; } -static int irix_xstat64_xlate(struct kstat *stat, void *ubuf) +static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf) { struct xstat64 { u32 st_dev; s32 st_pad1[3]; @@ -1259,7 +1250,7 @@ static int irix_xstat64_xlate(struct kstat *stat, void *ubuf) return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0; } -asmlinkage int irix_xstat(int version, char *filename, struct stat *statbuf) +asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf) { int retval; struct kstat stat; @@ -1285,7 +1276,7 @@ asmlinkage int irix_xstat(int version, char *filename, struct stat *statbuf) return retval; } -asmlinkage int irix_lxstat(int version, char *filename, struct stat *statbuf) +asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf) { int error; struct kstat stat; @@ -1312,7 +1303,7 @@ asmlinkage int irix_lxstat(int version, char *filename, struct stat *statbuf) return error; } -asmlinkage int irix_fxstat(int version, int fd, struct stat *statbuf) +asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf) { int error; struct kstat stat; @@ -1338,7 +1329,7 @@ asmlinkage int irix_fxstat(int version, int fd, struct stat *statbuf) return error; } -asmlinkage int irix_xmknod(int ver, char *filename, int mode, unsigned dev) +asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev) { int retval; printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n", @@ -1358,7 +1349,7 @@ asmlinkage int irix_xmknod(int ver, char *filename, int mode, unsigned dev) return retval; } -asmlinkage int irix_swapctl(int cmd, char *arg) +asmlinkage int irix_swapctl(int cmd, char __user *arg) { printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n", current->comm, current->pid, cmd, arg); @@ -1374,7 +1365,7 @@ struct irix_statvfs { char f_fstr[32]; u32 f_filler[16]; }; -asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf) +asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf) { struct nameidata nd; struct kstatfs kbuf; @@ -1382,10 +1373,9 @@ asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf) printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n", current->comm, current->pid, fname, buf); - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) { - error = -EFAULT; - goto out; - } + if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) + return -EFAULT; + error = user_path_walk(fname, &nd); if (error) goto out; @@ -1393,27 +1383,25 @@ asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf) if (error) goto dput_and_out; - __put_user(kbuf.f_bsize, &buf->f_bsize); - __put_user(kbuf.f_frsize, &buf->f_frsize); - __put_user(kbuf.f_blocks, &buf->f_blocks); - __put_user(kbuf.f_bfree, &buf->f_bfree); - __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - __put_user(kbuf.f_files, &buf->f_files); - __put_user(kbuf.f_ffree, &buf->f_ffree); - __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ + error |= __put_user(kbuf.f_bsize, &buf->f_bsize); + error |= __put_user(kbuf.f_frsize, &buf->f_frsize); + error |= __put_user(kbuf.f_blocks, &buf->f_blocks); + error |= __put_user(kbuf.f_bfree, &buf->f_bfree); + error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ + error |= __put_user(kbuf.f_files, &buf->f_files); + error |= __put_user(kbuf.f_ffree, &buf->f_ffree); + error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ #ifdef __MIPSEB__ - __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); + error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); #else - __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); + error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); #endif for (i = 0; i < 16; i++) - __put_user(0, &buf->f_basetype[i]); - __put_user(0, &buf->f_flag); - __put_user(kbuf.f_namelen, &buf->f_namemax); + error |= __put_user(0, &buf->f_basetype[i]); + error |= __put_user(0, &buf->f_flag); + error |= __put_user(kbuf.f_namelen, &buf->f_namemax); for (i = 0; i < 32; i++) - __put_user(0, &buf->f_fstr[i]); - - error = 0; + error |= __put_user(0, &buf->f_fstr[i]); dput_and_out: path_release(&nd); @@ -1421,7 +1409,7 @@ asmlinkage int irix_statvfs(char *fname, struct irix_statvfs *buf) return error; } -asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf) +asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf) { struct kstatfs kbuf; struct file *file; @@ -1430,10 +1418,9 @@ asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf) printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n", current->comm, current->pid, fd, buf); - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) { - error = -EFAULT; - goto out; - } + if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) + return -EFAULT; + if (!(file = fget(fd))) { error = -EBADF; goto out; @@ -1442,24 +1429,24 @@ asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs *buf) if (error) goto out_f; - __put_user(kbuf.f_bsize, &buf->f_bsize); - __put_user(kbuf.f_frsize, &buf->f_frsize); - __put_user(kbuf.f_blocks, &buf->f_blocks); - __put_user(kbuf.f_bfree, &buf->f_bfree); - __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - __put_user(kbuf.f_files, &buf->f_files); - __put_user(kbuf.f_ffree, &buf->f_ffree); - __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ + error = __put_user(kbuf.f_bsize, &buf->f_bsize); + error |= __put_user(kbuf.f_frsize, &buf->f_frsize); + error |= __put_user(kbuf.f_blocks, &buf->f_blocks); + error |= __put_user(kbuf.f_bfree, &buf->f_bfree); + error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ + error |= __put_user(kbuf.f_files, &buf->f_files); + error |= __put_user(kbuf.f_ffree, &buf->f_ffree); + error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ #ifdef __MIPSEB__ - __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); + error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); #else - __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); + error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); #endif for(i = 0; i < 16; i++) - __put_user(0, &buf->f_basetype[i]); - __put_user(0, &buf->f_flag); - __put_user(kbuf.f_namelen, &buf->f_namemax); - __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)); + error |= __put_user(0, &buf->f_basetype[i]); + error |= __put_user(0, &buf->f_flag); + error |= __put_user(kbuf.f_namelen, &buf->f_namemax); + error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0; out_f: fput(file); @@ -1483,7 +1470,7 @@ asmlinkage int irix_sigqueue(int pid, int sig, int code, int val) return -EINVAL; } -asmlinkage int irix_truncate64(char *name, int pad, int size1, int size2) +asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2) { int retval; @@ -1516,6 +1503,7 @@ asmlinkage int irix_mmap64(struct pt_regs *regs) int len, prot, flags, fd, off1, off2, error, base = 0; unsigned long addr, pgoff, *sp; struct file *file = NULL; + int err; if (regs->regs[2] == 1000) base = 1; @@ -1525,36 +1513,31 @@ asmlinkage int irix_mmap64(struct pt_regs *regs) prot = regs->regs[base + 6]; if (!base) { flags = regs->regs[base + 7]; - if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long)))) { - error = -EFAULT; - goto out; - } + if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long)))) + return -EFAULT; fd = sp[0]; - __get_user(off1, &sp[1]); - __get_user(off2, &sp[2]); + err = __get_user(off1, &sp[1]); + err |= __get_user(off2, &sp[2]); } else { - if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long)))) { - error = -EFAULT; - goto out; - } - __get_user(flags, &sp[0]); - __get_user(fd, &sp[1]); - __get_user(off1, &sp[2]); - __get_user(off2, &sp[3]); + if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long)))) + return -EFAULT; + err = __get_user(flags, &sp[0]); + err |= __get_user(fd, &sp[1]); + err |= __get_user(off1, &sp[2]); + err |= __get_user(off2, &sp[3]); } - if (off1 & PAGE_MASK) { - error = -EOVERFLOW; - goto out; - } + if (err) + return err; + + if (off1 & PAGE_MASK) + return -EOVERFLOW; pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT); if (!(flags & MAP_ANONYMOUS)) { - if (!(file = fget(fd))) { - error = -EBADF; - goto out; - } + if (!(file = fget(fd))) + return -EBADF; /* Ok, bad taste hack follows, try to think in something else when reading this */ @@ -1564,7 +1547,7 @@ asmlinkage int irix_mmap64(struct pt_regs *regs) if (max_size > file->f_dentry->d_inode->i_size) { old_pos = sys_lseek (fd, max_size - 1, 0); - sys_write (fd, "", 1); + sys_write (fd, (void __user *) "", 1); sys_lseek (fd, old_pos, 0); } } @@ -1579,7 +1562,6 @@ asmlinkage int irix_mmap64(struct pt_regs *regs) if (file) fput(file); -out: return error; } @@ -1591,7 +1573,7 @@ asmlinkage int irix_dmi(struct pt_regs *regs) return -EINVAL; } -asmlinkage int irix_pread(int fd, char *buf, int cnt, int off64, +asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64, int off1, int off2) { printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n", @@ -1600,7 +1582,7 @@ asmlinkage int irix_pread(int fd, char *buf, int cnt, int off64, return -EINVAL; } -asmlinkage int irix_pwrite(int fd, char *buf, int cnt, int off64, +asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64, int off1, int off2) { printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n", @@ -1632,7 +1614,7 @@ struct irix_statvfs64 { u32 f_filler[16]; }; -asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf) +asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf) { struct nameidata nd; struct kstatfs kbuf; @@ -1644,6 +1626,7 @@ asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf) error = -EFAULT; goto out; } + error = user_path_walk(fname, &nd); if (error) goto out; @@ -1651,27 +1634,25 @@ asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf) if (error) goto dput_and_out; - __put_user(kbuf.f_bsize, &buf->f_bsize); - __put_user(kbuf.f_frsize, &buf->f_frsize); - __put_user(kbuf.f_blocks, &buf->f_blocks); - __put_user(kbuf.f_bfree, &buf->f_bfree); - __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - __put_user(kbuf.f_files, &buf->f_files); - __put_user(kbuf.f_ffree, &buf->f_ffree); - __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ + error = __put_user(kbuf.f_bsize, &buf->f_bsize); + error |= __put_user(kbuf.f_frsize, &buf->f_frsize); + error |= __put_user(kbuf.f_blocks, &buf->f_blocks); + error |= __put_user(kbuf.f_bfree, &buf->f_bfree); + error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ + error |= __put_user(kbuf.f_files, &buf->f_files); + error |= __put_user(kbuf.f_ffree, &buf->f_ffree); + error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ #ifdef __MIPSEB__ - __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); + error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); #else - __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); + error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); #endif for(i = 0; i < 16; i++) - __put_user(0, &buf->f_basetype[i]); - __put_user(0, &buf->f_flag); - __put_user(kbuf.f_namelen, &buf->f_namemax); + error |= __put_user(0, &buf->f_basetype[i]); + error |= __put_user(0, &buf->f_flag); + error |= __put_user(kbuf.f_namelen, &buf->f_namemax); for(i = 0; i < 32; i++) - __put_user(0, &buf->f_fstr[i]); - - error = 0; + error |= __put_user(0, &buf->f_fstr[i]); dput_and_out: path_release(&nd); @@ -1679,7 +1660,7 @@ asmlinkage int irix_statvfs64(char *fname, struct irix_statvfs64 *buf) return error; } -asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf) +asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf) { struct kstatfs kbuf; struct file *file; @@ -1700,24 +1681,24 @@ asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf) if (error) goto out_f; - __put_user(kbuf.f_bsize, &buf->f_bsize); - __put_user(kbuf.f_frsize, &buf->f_frsize); - __put_user(kbuf.f_blocks, &buf->f_blocks); - __put_user(kbuf.f_bfree, &buf->f_bfree); - __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - __put_user(kbuf.f_files, &buf->f_files); - __put_user(kbuf.f_ffree, &buf->f_ffree); - __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ + error = __put_user(kbuf.f_bsize, &buf->f_bsize); + error |= __put_user(kbuf.f_frsize, &buf->f_frsize); + error |= __put_user(kbuf.f_blocks, &buf->f_blocks); + error |= __put_user(kbuf.f_bfree, &buf->f_bfree); + error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ + error |= __put_user(kbuf.f_files, &buf->f_files); + error |= __put_user(kbuf.f_ffree, &buf->f_ffree); + error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ #ifdef __MIPSEB__ - __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); + error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); #else - __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); + error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); #endif for(i = 0; i < 16; i++) - __put_user(0, &buf->f_basetype[i]); - __put_user(0, &buf->f_flag); - __put_user(kbuf.f_namelen, &buf->f_namemax); - __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])); + error |= __put_user(0, &buf->f_basetype[i]); + error |= __put_user(0, &buf->f_flag); + error |= __put_user(kbuf.f_namelen, &buf->f_namemax); + error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0; out_f: fput(file); @@ -1725,9 +1706,9 @@ asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs *buf) return error; } -asmlinkage int irix_getmountid(char *fname, unsigned long *midbuf) +asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf) { - int err = 0; + int err; printk("[%s:%d] irix_getmountid(%s, %p)\n", current->comm, current->pid, fname, midbuf); @@ -1740,7 +1721,7 @@ asmlinkage int irix_getmountid(char *fname, unsigned long *midbuf) * fsid of the filesystem to try and make the right decision, but * we don't have this so for now. XXX */ - err |= __put_user(0, &midbuf[0]); + err = __put_user(0, &midbuf[0]); err |= __put_user(0, &midbuf[1]); err |= __put_user(0, &midbuf[2]); err |= __put_user(0, &midbuf[3]); @@ -1767,8 +1748,8 @@ struct irix_dirent32 { }; struct irix_dirent32_callback { - struct irix_dirent32 *current_dir; - struct irix_dirent32 *previous; + struct irix_dirent32 __user *current_dir; + struct irix_dirent32 __user *previous; int count; int error; }; @@ -1776,13 +1757,13 @@ struct irix_dirent32_callback { #define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de))) #define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1)) -static int irix_filldir32(void *__buf, const char *name, int namlen, - loff_t offset, ino_t ino, unsigned int d_type) +static int irix_filldir32(void *__buf, const char *name, + int namlen, loff_t offset, ino_t ino, unsigned int d_type) { - struct irix_dirent32 *dirent; - struct irix_dirent32_callback *buf = - (struct irix_dirent32_callback *)__buf; + struct irix_dirent32 __user *dirent; + struct irix_dirent32_callback *buf = __buf; unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1); + int err = 0; #ifdef DEBUG_GETDENTS printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]", @@ -1793,25 +1774,26 @@ static int irix_filldir32(void *__buf, const char *name, int namlen, return -EINVAL; dirent = buf->previous; if (dirent) - __put_user(offset, &dirent->d_off); + err = __put_user(offset, &dirent->d_off); dirent = buf->current_dir; - buf->previous = dirent; - __put_user(ino, &dirent->d_ino); - __put_user(reclen, &dirent->d_reclen); - copy_to_user(dirent->d_name, name, namlen); - __put_user(0, &dirent->d_name[namlen]); - ((char *) dirent) += reclen; + err |= __put_user(dirent, &buf->previous); + err |= __put_user(ino, &dirent->d_ino); + err |= __put_user(reclen, &dirent->d_reclen); + err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0; + err |= __put_user(0, &dirent->d_name[namlen]); + dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen); + buf->current_dir = dirent; buf->count -= reclen; - return 0; + return err; } -asmlinkage int irix_ngetdents(unsigned int fd, void * dirent, - unsigned int count, int *eob) +asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent, + unsigned int count, int __user *eob) { struct file *file; - struct irix_dirent32 *lastdirent; + struct irix_dirent32 __user *lastdirent; struct irix_dirent32_callback buf; int error; @@ -1824,7 +1806,7 @@ asmlinkage int irix_ngetdents(unsigned int fd, void * dirent, if (!file) goto out; - buf.current_dir = (struct irix_dirent32 *) dirent; + buf.current_dir = (struct irix_dirent32 __user *) dirent; buf.previous = NULL; buf.count = count; buf.error = 0; @@ -1864,8 +1846,8 @@ struct irix_dirent64 { }; struct irix_dirent64_callback { - struct irix_dirent64 *curr; - struct irix_dirent64 *previous; + struct irix_dirent64 __user *curr; + struct irix_dirent64 __user *previous; int count; int error; }; @@ -1873,37 +1855,44 @@ struct irix_dirent64_callback { #define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de))) #define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1)) -static int irix_filldir64(void * __buf, const char * name, int namlen, - loff_t offset, ino_t ino, unsigned int d_type) +static int irix_filldir64(void *__buf, const char *name, + int namlen, loff_t offset, ino_t ino, unsigned int d_type) { - struct irix_dirent64 *dirent; - struct irix_dirent64_callback * buf = - (struct irix_dirent64_callback *) __buf; + struct irix_dirent64 __user *dirent; + struct irix_dirent64_callback * buf = __buf; unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1); + int err = 0; - buf->error = -EINVAL; /* only used if we fail.. */ + if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf))) + return -EFAULT; + + if (__put_user(-EINVAL, &buf->error)) /* only used if we fail.. */ + return -EFAULT; if (reclen > buf->count) return -EINVAL; dirent = buf->previous; if (dirent) - __put_user(offset, &dirent->d_off); + err = __put_user(offset, &dirent->d_off); dirent = buf->curr; buf->previous = dirent; - __put_user(ino, &dirent->d_ino); - __put_user(reclen, &dirent->d_reclen); - __copy_to_user(dirent->d_name, name, namlen); - __put_user(0, &dirent->d_name[namlen]); - ((char *) dirent) += reclen; + err |= __put_user(ino, &dirent->d_ino); + err |= __put_user(reclen, &dirent->d_reclen); + err |= __copy_to_user((char __user *)dirent->d_name, name, namlen) + ? -EFAULT : 0; + err |= __put_user(0, &dirent->d_name[namlen]); + + dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen); + buf->curr = dirent; buf->count -= reclen; - return 0; + return err; } -asmlinkage int irix_getdents64(int fd, void *dirent, int cnt) +asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt) { struct file *file; - struct irix_dirent64 *lastdirent; + struct irix_dirent64 __user *lastdirent; struct irix_dirent64_callback buf; int error; @@ -1923,7 +1912,7 @@ asmlinkage int irix_getdents64(int fd, void *dirent, int cnt) if (cnt < (sizeof(struct irix_dirent64) + 255)) goto out_f; - buf.curr = (struct irix_dirent64 *) dirent; + buf.curr = (struct irix_dirent64 __user *) dirent; buf.previous = NULL; buf.count = cnt; buf.error = 0; @@ -1935,7 +1924,8 @@ asmlinkage int irix_getdents64(int fd, void *dirent, int cnt) error = buf.error; goto out_f; } - lastdirent->d_off = (u64) file->f_pos; + if (put_user(file->f_pos, &lastdirent->d_off)) + return -EFAULT; #ifdef DEBUG_GETDENTS printk("returning %d\n", cnt - buf.count); #endif @@ -1947,10 +1937,10 @@ asmlinkage int irix_getdents64(int fd, void *dirent, int cnt) return error; } -asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob) +asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob) { struct file *file; - struct irix_dirent64 *lastdirent; + struct irix_dirent64 __user *lastdirent; struct irix_dirent64_callback buf; int error; @@ -1972,7 +1962,7 @@ asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob) goto out_f; *eob = 0; - buf.curr = (struct irix_dirent64 *) dirent; + buf.curr = (struct irix_dirent64 __user *) dirent; buf.previous = NULL; buf.count = cnt; buf.error = 0; @@ -1984,7 +1974,8 @@ asmlinkage int irix_ngetdents64(int fd, void *dirent, int cnt, int *eob) error = buf.error; goto out_f; } - lastdirent->d_off = (u64) file->f_pos; + if (put_user(file->f_pos, &lastdirent->d_off)) + return -EFAULT; #ifdef DEBUG_GETDENTS printk("eob=%d returning %d\n", *eob, cnt - buf.count); #endif @@ -2047,14 +2038,14 @@ asmlinkage int irix_uadmin(unsigned long op, unsigned long func, unsigned long a return retval; } -asmlinkage int irix_utssys(char *inbuf, int arg, int type, char *outbuf) +asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf) { int retval; switch(type) { case 0: /* uname() */ - retval = irix_uname((struct iuname *)inbuf); + retval = irix_uname((struct iuname __user *)inbuf); goto out; case 2: diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index d06db5f8115f..f9a6a5665559 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -339,9 +339,9 @@ asmlinkage void do_be(struct pt_regs *regs) static inline int get_insn_opcode(struct pt_regs *regs, unsigned int *opcode) { - unsigned int *epc; + unsigned int __user *epc; - epc = (unsigned int *) regs->cp0_epc + + epc = (unsigned int __user *) regs->cp0_epc + ((regs->cp0_cause & CAUSEF_BD) != 0); if (!get_user(*opcode, epc)) return 0; @@ -371,7 +371,7 @@ static struct task_struct *ll_task = NULL; static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode) { - unsigned long value, *vaddr; + unsigned long value, __user *vaddr; long offset; int signal = 0; @@ -385,7 +385,8 @@ static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode) offset <<= 16; offset >>= 16; - vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset); + vaddr = (unsigned long __user *) + ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset); if ((unsigned long)vaddr & 3) { signal = SIGBUS; @@ -418,7 +419,8 @@ static inline void simulate_ll(struct pt_regs *regs, unsigned int opcode) static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode) { - unsigned long *vaddr, reg; + unsigned long __user *vaddr; + unsigned long reg; long offset; int signal = 0; @@ -432,7 +434,8 @@ static inline void simulate_sc(struct pt_regs *regs, unsigned int opcode) offset <<= 16; offset >>= 16; - vaddr = (unsigned long *)((long)(regs->regs[(opcode & BASE) >> 21]) + offset); + vaddr = (unsigned long __user *) + ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset); reg = (opcode & RT) >> 16; if ((unsigned long)vaddr & 3) { @@ -498,7 +501,7 @@ asmlinkage void do_ov(struct pt_regs *regs) info.si_code = FPE_INTOVF; info.si_signo = SIGFPE; info.si_errno = 0; - info.si_addr = (void *)regs->cp0_epc; + info.si_addr = (void __user *) regs->cp0_epc; force_sig_info(SIGFPE, &info, current); } @@ -584,7 +587,7 @@ asmlinkage void do_bp(struct pt_regs *regs) info.si_code = FPE_INTOVF; info.si_signo = SIGFPE; info.si_errno = 0; - info.si_addr = (void *)regs->cp0_epc; + info.si_addr = (void __user *) regs->cp0_epc; force_sig_info(SIGFPE, &info, current); break; default: @@ -621,7 +624,7 @@ asmlinkage void do_tr(struct pt_regs *regs) info.si_code = FPE_INTOVF; info.si_signo = SIGFPE; info.si_errno = 0; - info.si_addr = (void *)regs->cp0_epc; + info.si_addr = (void __user *) regs->cp0_epc; force_sig_info(SIGFPE, &info, current); break; default: diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 36c5212e0928..5b5a3736cbbc 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -94,7 +94,7 @@ unsigned long unaligned_instructions; #endif static inline int emulate_load_store_insn(struct pt_regs *regs, - void *addr, unsigned long pc, + void __user *addr, unsigned int __user *pc, unsigned long **regptr, unsigned long *newvalue) { union mips_instruction insn; @@ -107,7 +107,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs, /* * This load never faults. */ - __get_user(insn.word, (unsigned int *)pc); + __get_user(insn.word, pc); switch (insn.i_format.opcode) { /* @@ -494,8 +494,8 @@ asmlinkage void do_ade(struct pt_regs *regs) { unsigned long *regptr, newval; extern int do_dsemulret(struct pt_regs *); + unsigned int __user *pc; mm_segment_t seg; - unsigned long pc; /* * Address errors may be deliberately induced by the FPU emulator to @@ -515,7 +515,7 @@ asmlinkage void do_ade(struct pt_regs *regs) if ((regs->cp0_badvaddr == regs->cp0_epc) || (regs->cp0_epc & 0x1)) goto sigbus; - pc = exception_epc(regs); + pc = (unsigned int __user *) exception_epc(regs); if ((current->thread.mflags & MF_FIXADE) == 0) goto sigbus; @@ -526,7 +526,7 @@ asmlinkage void do_ade(struct pt_regs *regs) seg = get_fs(); if (!user_mode(regs)) set_fs(KERNEL_DS); - if (!emulate_load_store_insn(regs, (void *)regs->cp0_badvaddr, pc, + if (!emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc, ®ptr, &newval)) { compute_return_epc(regs); /* diff --git a/arch/mips/lib/csum_partial_copy.c b/arch/mips/lib/csum_partial_copy.c index 2f26ff99c715..6e9f366f961d 100644 --- a/arch/mips/lib/csum_partial_copy.c +++ b/arch/mips/lib/csum_partial_copy.c @@ -33,7 +33,7 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, * Copy from userspace and compute checksum. If we catch an exception * then zero the rest of the buffer. */ -unsigned int csum_partial_copy_from_user (const unsigned char *src, +unsigned int csum_partial_copy_from_user (const unsigned char __user *src, unsigned char *dst, int len, unsigned int sum, int *err_ptr) { int missing; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index e26dd829bf20..48d731c2f08a 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -456,8 +456,8 @@ static void r4k_flush_data_cache_page(unsigned long addr) } struct flush_icache_range_args { - unsigned long start; - unsigned long end; + unsigned long __user start; + unsigned long __user end; }; static inline void local_r4k_flush_icache_range(void *args) @@ -519,7 +519,8 @@ static inline void local_r4k_flush_icache_range(void *args) } } -static void r4k_flush_icache_range(unsigned long start, unsigned long end) +static void r4k_flush_icache_range(unsigned long __user start, + unsigned long __user end) { struct flush_icache_range_args args; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 1d95cdb77bed..c0ac4f97e1ae 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -24,7 +24,8 @@ void (*flush_cache_mm)(struct mm_struct *mm); void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start, unsigned long end); void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); -void (*flush_icache_range)(unsigned long start, unsigned long end); +void (*flush_icache_range)(unsigned long __user start, + unsigned long __user end); void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page); /* MIPS specific cache operations */ @@ -49,10 +50,10 @@ EXPORT_SYMBOL(_dma_cache_inv); * We could optimize the case where the cache argument is not BCACHE but * that seems very atypical use ... */ -asmlinkage int sys_cacheflush(unsigned long addr, unsigned long int bytes, - unsigned int cache) +asmlinkage int sys_cacheflush(unsigned long __user addr, + unsigned long bytes, unsigned int cache) { - if (!access_ok(VERIFY_WRITE, (void *) addr, bytes)) + if (!access_ok(VERIFY_WRITE, (void __user *) addr, bytes)) return -EFAULT; flush_icache_range(addr, addr + bytes); diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index 0eb43151f10a..2d9624fd10ec 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -141,7 +141,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write, info.si_signo = SIGSEGV; info.si_errno = 0; /* info.si_code has been set above */ - info.si_addr = (void *) address; + info.si_addr = (void __user *) address; force_sig_info(SIGSEGV, &info, tsk); return; } @@ -197,7 +197,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write, info.si_signo = SIGBUS; info.si_errno = 0; info.si_code = BUS_ADRERR; - info.si_addr = (void *) address; + info.si_addr = (void __user *) address; force_sig_info(SIGBUS, &info, tsk); return; diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h index 3780c9f9354a..3711d720aeb4 100644 --- a/include/asm-mips/cacheflush.h +++ b/include/asm-mips/cacheflush.h @@ -49,7 +49,8 @@ static inline void flush_dcache_page(struct page *page) extern void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page); -extern void (*flush_icache_range)(unsigned long start, unsigned long end); +extern void (*flush_icache_range)(unsigned long __user start, + unsigned long __user end); #define flush_cache_vmap(start, end) flush_cache_all() #define flush_cache_vunmap(start, end) flush_cache_all() diff --git a/include/asm-mips/checksum.h b/include/asm-mips/checksum.h index c1ea5a8714f3..436d26cd6f6f 100644 --- a/include/asm-mips/checksum.h +++ b/include/asm-mips/checksum.h @@ -34,8 +34,9 @@ unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum); * this is a new version of the above that records errors it finds in *errp, * but continues and zeros the rest of the buffer. */ -unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst, int len, - unsigned int sum, int *errp); +unsigned int csum_partial_copy_from_user(const unsigned char __user *src, + unsigned char *dst, int len, + unsigned int sum, int *errp); /* * Copy and checksum to user diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index e03cb77b131c..cee0562a7851 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -25,6 +25,7 @@ #include #include #include +#include #include @@ -217,7 +218,7 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, */ if (flags == _CACHE_UNCACHED) base = (u64) IO_BASE; - return (void *) (unsigned long) (base + offset); + return (void __iomem *) (unsigned long) (base + offset); } return __ioremap(offset, size, flags); @@ -486,9 +487,18 @@ BUILDSTRING(q, u64) /* Depends on MIPS II instruction set */ #define mmiowb() asm volatile ("sync" ::: "memory") -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) +static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) +{ + memset((void __force *) addr, val, count); +} +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) +{ + memcpy(dst, (void __force *) src, count); +} +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) +{ + memcpy((void __force *) dst, src, count); +} /* * Memory Mapped I/O diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h index 3f2470e9e678..8a342ccb34a8 100644 --- a/include/asm-mips/irq.h +++ b/include/asm-mips/irq.h @@ -24,11 +24,9 @@ static inline int irq_canonicalize(int irq) struct pt_regs; -#ifdef CONFIG_PREEMPT - extern asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs); -#else +#ifdef CONFIG_PREEMPT /* * do_IRQ handles all normal device IRQ's (the special diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h index 177747ad7a59..3cc341ac87c7 100644 --- a/include/asm-mips/sibyte/sb1250.h +++ b/include/asm-mips/sibyte/sb1250.h @@ -58,6 +58,6 @@ extern void prom_printf(char *fmt, ...); #endif -#define IOADDR(a) ((void *)(IO_BASE + (a))) +#define IOADDR(a) ((volatile void __iomem *)(IO_BASE + (a))) #endif diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index 5c2c98329012..b41901db69b8 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -196,63 +196,56 @@ __get_user_nocheck((x),(ptr),sizeof(*(ptr))) struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) +#define __m(x) (*(struct __large_struct __user *)(x)) /* * Yuck. We need two variants, one for 64bit operation and one * for 32 bit mode and old iron. */ #ifdef __mips64 -#define __GET_USER_DW(__gu_err) __get_user_asm("ld", __gu_err) +#define __GET_USER_DW(ptr) __get_user_asm("ld", ptr) #else -#define __GET_USER_DW(__gu_err) __get_user_asm_ll32(__gu_err) +#define __GET_USER_DW(ptr) __get_user_asm_ll32(ptr) #endif #define __get_user_nocheck(x,ptr,size) \ ({ \ - __typeof(*(ptr)) __gu_val = 0; \ - long __gu_addr; \ + __typeof(*(ptr)) __gu_val = (__typeof(*(ptr))) 0; \ long __gu_err = 0; \ \ might_sleep(); \ - __gu_addr = (long) (ptr); \ switch (size) { \ - case 1: __get_user_asm("lb", __gu_err); break; \ - case 2: __get_user_asm("lh", __gu_err); break; \ - case 4: __get_user_asm("lw", __gu_err); break; \ - case 8: __GET_USER_DW(__gu_err); break; \ + case 1: __get_user_asm("lb", ptr); break; \ + case 2: __get_user_asm("lh", ptr); break; \ + case 4: __get_user_asm("lw", ptr); break; \ + case 8: __GET_USER_DW(ptr); break; \ default: __get_user_unknown(); break; \ } \ - x = (__typeof__(*(ptr))) __gu_val; \ + (x) = (__typeof__(*(ptr))) __gu_val; \ __gu_err; \ }) #define __get_user_check(x,ptr,size) \ ({ \ + const __typeof__(*(ptr)) __user * __gu_addr = (ptr); \ __typeof__(*(ptr)) __gu_val = 0; \ - long __gu_addr; \ - long __gu_err; \ + long __gu_err = -EFAULT; \ \ - might_sleep(); \ - __gu_addr = (long) (ptr); \ - __gu_err = access_ok(VERIFY_READ, (void *) __gu_addr, size) \ - ? 0 : -EFAULT; \ - \ - if (likely(!__gu_err)) { \ + if (likely(access_ok(VERIFY_READ, __gu_addr, size))) { \ switch (size) { \ - case 1: __get_user_asm("lb", __gu_err); break; \ - case 2: __get_user_asm("lh", __gu_err); break; \ - case 4: __get_user_asm("lw", __gu_err); break; \ - case 8: __GET_USER_DW(__gu_err); break; \ + case 1: __get_user_asm("lb", __gu_addr); break; \ + case 2: __get_user_asm("lh", __gu_addr); break; \ + case 4: __get_user_asm("lw", __gu_addr); break; \ + case 8: __GET_USER_DW(__gu_addr); break; \ default: __get_user_unknown(); break; \ } \ } \ - x = (__typeof__(*(ptr))) __gu_val; \ + (x) = (__typeof__(*(ptr))) __gu_val; \ __gu_err; \ }) -#define __get_user_asm(insn,__gu_err) \ -({ \ +#define __get_user_asm(insn, addr) \ +{ \ __asm__ __volatile__( \ "1: " insn " %1, %3 \n" \ "2: \n" \ @@ -264,20 +257,20 @@ struct __large_struct { unsigned long buf[100]; }; " "__UA_ADDR "\t1b, 3b \n" \ " .previous \n" \ : "=r" (__gu_err), "=r" (__gu_val) \ - : "0" (__gu_err), "o" (__m(__gu_addr)), "i" (-EFAULT)); \ -}) + : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \ +} /* * Get a long long 64 using 32 bit registers. */ -#define __get_user_asm_ll32(__gu_err) \ -({ \ +#define __get_user_asm_ll32(addr) \ +{ \ __asm__ __volatile__( \ - "1: lw %1, %3 \n" \ - "2: lw %D1, %4 \n" \ + "1: lw %1, (%3) \n" \ + "2: lw %D1, 4(%3) \n" \ " move %0, $0 \n" \ "3: .section .fixup,\"ax\" \n" \ - "4: li %0, %5 \n" \ + "4: li %0, %4 \n" \ " move %1, $0 \n" \ " move %D1, $0 \n" \ " j 3b \n" \ @@ -287,9 +280,8 @@ struct __large_struct { unsigned long buf[100]; }; " " __UA_ADDR " 2b, 4b \n" \ " .previous \n" \ : "=r" (__gu_err), "=&r" (__gu_val) \ - : "0" (__gu_err), "o" (__m(__gu_addr)), \ - "o" (__m(__gu_addr + 4)), "i" (-EFAULT)); \ -}) + : "0" (0), "r" (addr), "i" (-EFAULT)); \ +} extern void __get_user_unknown(void); @@ -298,25 +290,23 @@ extern void __get_user_unknown(void); * for 32 bit mode and old iron. */ #ifdef __mips64 -#define __PUT_USER_DW(__pu_val) __put_user_asm("sd", __pu_val) +#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr) #else -#define __PUT_USER_DW(__pu_val) __put_user_asm_ll32(__pu_val) +#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr) #endif #define __put_user_nocheck(x,ptr,size) \ ({ \ __typeof__(*(ptr)) __pu_val; \ - long __pu_addr; \ long __pu_err = 0; \ \ might_sleep(); \ __pu_val = (x); \ - __pu_addr = (long) (ptr); \ switch (size) { \ - case 1: __put_user_asm("sb", __pu_val); break; \ - case 2: __put_user_asm("sh", __pu_val); break; \ - case 4: __put_user_asm("sw", __pu_val); break; \ - case 8: __PUT_USER_DW(__pu_val); break; \ + case 1: __put_user_asm("sb", ptr); break; \ + case 2: __put_user_asm("sh", ptr); break; \ + case 4: __put_user_asm("sw", ptr); break; \ + case 8: __PUT_USER_DW(ptr); break; \ default: __put_user_unknown(); break; \ } \ __pu_err; \ @@ -324,30 +314,24 @@ extern void __get_user_unknown(void); #define __put_user_check(x,ptr,size) \ ({ \ - __typeof__(*(ptr)) __pu_val; \ - long __pu_addr; \ - long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + long __pu_err = -EFAULT; \ \ - might_sleep(); \ - __pu_val = (x); \ - __pu_addr = (long) (ptr); \ - __pu_err = access_ok(VERIFY_WRITE, (void *) __pu_addr, size) \ - ? 0 : -EFAULT; \ - \ - if (likely(!__pu_err)) { \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ switch (size) { \ - case 1: __put_user_asm("sb", __pu_val); break; \ - case 2: __put_user_asm("sh", __pu_val); break; \ - case 4: __put_user_asm("sw", __pu_val); break; \ - case 8: __PUT_USER_DW(__pu_val); break; \ + case 1: __put_user_asm("sb", __pu_addr); break; \ + case 2: __put_user_asm("sh", __pu_addr); break; \ + case 4: __put_user_asm("sw", __pu_addr); break; \ + case 8: __PUT_USER_DW(__pu_addr); break; \ default: __put_user_unknown(); break; \ } \ } \ __pu_err; \ }) -#define __put_user_asm(insn, __pu_val) \ -({ \ +#define __put_user_asm(insn, ptr) \ +{ \ __asm__ __volatile__( \ "1: " insn " %z2, %3 # __put_user_asm\n" \ "2: \n" \ @@ -359,18 +343,18 @@ extern void __get_user_unknown(void); " " __UA_ADDR " 1b, 3b \n" \ " .previous \n" \ : "=r" (__pu_err) \ - : "0" (__pu_err), "Jr" (__pu_val), "o" (__m(__pu_addr)), \ + : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \ "i" (-EFAULT)); \ -}) +} -#define __put_user_asm_ll32(__pu_val) \ -({ \ +#define __put_user_asm_ll32(ptr) \ +{ \ __asm__ __volatile__( \ - "1: sw %2, %3 # __put_user_asm_ll32 \n" \ - "2: sw %D2, %4 \n" \ + "1: sw %2, (%3) # __put_user_asm_ll32 \n" \ + "2: sw %D2, 4(%3) \n" \ "3: \n" \ " .section .fixup,\"ax\" \n" \ - "4: li %0, %5 \n" \ + "4: li %0, %4 \n" \ " j 3b \n" \ " .previous \n" \ " .section __ex_table,\"a\" \n" \ @@ -378,9 +362,9 @@ extern void __get_user_unknown(void); " " __UA_ADDR " 2b, 4b \n" \ " .previous" \ : "=r" (__pu_err) \ - : "0" (__pu_err), "r" (__pu_val), "o" (__m(__pu_addr)), \ - "o" (__m(__pu_addr + 4)), "i" (-EFAULT)); \ -}) + : "0" (0), "r" (__pu_val), "r" (ptr), \ + "i" (-EFAULT)); \ +} extern void __put_user_unknown(void); @@ -403,7 +387,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); #define __invoke_copy_to_user(to,from,n) \ ({ \ - register void *__cu_to_r __asm__ ("$4"); \ + register void __user *__cu_to_r __asm__ ("$4"); \ register const void *__cu_from_r __asm__ ("$5"); \ register long __cu_len_r __asm__ ("$6"); \ \ @@ -435,7 +419,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); */ #define __copy_to_user(to,from,n) \ ({ \ - void *__cu_to; \ + void __user *__cu_to; \ const void *__cu_from; \ long __cu_len; \ \ @@ -465,7 +449,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); */ #define copy_to_user(to,from,n) \ ({ \ - void *__cu_to; \ + void __user *__cu_to; \ const void *__cu_from; \ long __cu_len; \ \ @@ -482,7 +466,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); #define __invoke_copy_from_user(to,from,n) \ ({ \ register void *__cu_to_r __asm__ ("$4"); \ - register const void *__cu_from_r __asm__ ("$5"); \ + register const void __user *__cu_from_r __asm__ ("$5"); \ register long __cu_len_r __asm__ ("$6"); \ \ __cu_to_r = (to); \ @@ -521,7 +505,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); #define __copy_from_user(to,from,n) \ ({ \ void *__cu_to; \ - const void *__cu_from; \ + const void __user *__cu_from; \ long __cu_len; \ \ might_sleep(); \ @@ -552,7 +536,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); #define copy_from_user(to,from,n) \ ({ \ void *__cu_to; \ - const void *__cu_from; \ + const void __user *__cu_from; \ long __cu_len; \ \ might_sleep(); \ @@ -569,8 +553,8 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); #define copy_in_user(to,from,n) \ ({ \ - void *__cu_to; \ - const void *__cu_from; \ + void __user *__cu_to; \ + const void __user *__cu_from; \ long __cu_len; \ \ might_sleep(); \ @@ -596,7 +580,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); * On success, this will be zero. */ static inline __kernel_size_t -__clear_user(void *addr, __kernel_size_t size) +__clear_user(void __user *addr, __kernel_size_t size) { __kernel_size_t res; @@ -616,7 +600,7 @@ __clear_user(void *addr, __kernel_size_t size) #define clear_user(addr,n) \ ({ \ - void * __cl_addr = (addr); \ + void __user * __cl_addr = (addr); \ unsigned long __cl_size = (n); \ if (__cl_size && access_ok(VERIFY_WRITE, \ ((unsigned long)(__cl_addr)), __cl_size)) \ @@ -645,7 +629,7 @@ __clear_user(void *addr, __kernel_size_t size) * and returns @count. */ static inline long -__strncpy_from_user(char *__to, const char *__from, long __len) +__strncpy_from_user(char *__to, const char __user *__from, long __len) { long res; @@ -682,7 +666,7 @@ __strncpy_from_user(char *__to, const char *__from, long __len) * and returns @count. */ static inline long -strncpy_from_user(char *__to, const char *__from, long __len) +strncpy_from_user(char *__to, const char __user *__from, long __len) { long res; @@ -701,7 +685,7 @@ strncpy_from_user(char *__to, const char *__from, long __len) } /* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -static inline long __strlen_user(const char *s) +static inline long __strlen_user(const char __user *s) { long res; @@ -731,7 +715,7 @@ static inline long __strlen_user(const char *s) * If there is a limit on the length of a valid string, you may wish to * consider using strnlen_user() instead. */ -static inline long strlen_user(const char *s) +static inline long strlen_user(const char __user *s) { long res; @@ -748,7 +732,7 @@ static inline long strlen_user(const char *s) } /* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -static inline long __strnlen_user(const char *s, long n) +static inline long __strnlen_user(const char __user *s, long n) { long res; @@ -779,7 +763,7 @@ static inline long __strnlen_user(const char *s, long n) * If there is a limit on the length of a valid string, you may wish to * consider using strnlen_user() instead. */ -static inline long strnlen_user(const char *s, long n) +static inline long strnlen_user(const char __user *s, long n) { long res; -- GitLab From 88d535b6b58632bc51ee9a1f35ddfc357e365c37 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 2 Mar 2005 19:18:46 +0000 Subject: [PATCH 0963/1519] One definition of back_to_back_c0_hazard too much. Signed-off-by: Ralf Baechle --- include/asm-mips/hazards.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h index d6e88cf06ba9..181f08de889c 100644 --- a/include/asm-mips/hazards.h +++ b/include/asm-mips/hazards.h @@ -107,6 +107,7 @@ __asm__( " .endm \n\t"); #ifdef CONFIG_CPU_RM9000 + /* * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent * use of the JTLB for instructions should not occur for 4 cpu cycles and use @@ -144,12 +145,6 @@ __asm__( "nop; nop; nop; nop; nop; nop;\n\t" \ ".set reorder\n\t") -#define back_to_back_c0_hazard() \ - __asm__ __volatile__( \ - " .set noreorder \n" \ - " nop; nop; nop \n" \ - " .set reorder \n") - #endif /* -- GitLab From ebc7f12fbc6a2d2df1930b91b380c9defb48cbf3 Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Fri, 4 Mar 2005 08:31:06 +0000 Subject: [PATCH 0964/1519] Int controller fixes. Signed-off-by: Ralf Baechle --- arch/mips/au1000/pb1200/board_setup.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c index 209a07cb7321..9c5d48dd7121 100644 --- a/arch/mips/au1000/pb1200/board_setup.c +++ b/arch/mips/au1000/pb1200/board_setup.c @@ -59,8 +59,6 @@ extern void _board_init_irq(void); extern void (*board_init_irq)(void); #ifdef CONFIG_BLK_DEV_IDE_AU1XXX -extern struct ide_ops *ide_ops; -extern struct ide_ops au1xxx_ide_ops; extern u32 au1xxx_ide_virtbase; extern u64 au1xxx_ide_physbase; extern int au1xxx_ide_irq; @@ -147,7 +145,6 @@ void __init board_setup(void) /* * Iniz IDE parameters */ - ide_ops = &au1xxx_ide_ops; au1xxx_ide_irq = PB1200_IDE_INT; au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR; au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR); @@ -176,12 +173,11 @@ void __init board_setup(void) #ifdef CONFIG_MIPS_DB1200 printk("AMD Alchemy Db1200 Board\n"); #endif -#if 0 + /* Setup Pb1200 External Interrupt Controller */ { extern void (*board_init_irq)(void); extern void _board_init_irq(void); board_init_irq = _board_init_irq; } -#endif } -- GitLab From cdaed73afb61913ee5115aa38b0c35ecb0513f50 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 4 Mar 2005 12:35:42 +0000 Subject: [PATCH 0965/1519] Fix preemption bug. Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index ebc1a5d4f8b8..6e01b0dd031f 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -58,9 +58,8 @@ need_resched: LONG_L t0, PT_STATUS(sp) # Interrupts off? andi t0, 1 beqz t0, restore_all - li t0, PREEMPT_ACTIVE - sw t0, TI_PRE_COUNT($28) jal preempt_schedule_irq + b need_resched #endif FEXPORT(ret_from_fork) -- GitLab From 5eaf7a21be3f7f81573cf26541b8f9cc786fb67d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 4 Mar 2005 17:24:32 +0000 Subject: [PATCH 0966/1519] Use new txx9 serial driver. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 ++ arch/mips/jmr3927/rbhma3100/setup.c | 31 +++++++++++++++++-- .../toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 23 ++++++++++++++ include/asm-mips/jmr3927/jmr3927.h | 14 --------- include/asm-mips/serial.h | 12 ------- 5 files changed, 53 insertions(+), 29 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 455de42db7c9..41d782e207c3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -635,6 +635,7 @@ config SGI_IP32 select OWN_DMA select DMA_IP32 select DMA_NONCOHERENT + select HAS_TXX9_SERIAL select HW_HAS_PCI select R5000_CPU_SCACHE select RM7000_CPU_SCACHE @@ -814,6 +815,7 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool + select HAS_TXX9_SERIAL config GENERIC_CALIBRATE_DELAY bool diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index d9f7a9989de5..3e2fbdc66097 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -44,6 +44,11 @@ #include #include /* for HZ */ #include +#ifdef CONFIG_SERIAL_TXX9 +#include +#include +#include +#endif #include #include @@ -211,8 +216,8 @@ void __init plat_setup(void) */ ioport_resource.start = pci_io_resource.start; ioport_resource.end = pci_io_resource.end; - iomem_resource.start = pci_mem_resource.start; - iomem_resource.end = pci_mem_resource.end; + iomem_resource.start = 0; + iomem_resource.end = 0xffffffff; /* Reboot on panic */ panic_timeout = 180; @@ -265,13 +270,33 @@ void __init plat_setup(void) strcat(argptr, " ip=bootp"); } -#ifdef CONFIG_TXX927_SERIAL_CONSOLE +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + int i; + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (char *)TX3927_SIO_REG(i); + req.mapbase = TX3927_SIO_REG(i); + req.irq = i == 0 ? + JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; + if (i == 0) + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = JMR3927_IMCLK; + early_serial_txx9_setup(&req); + } + } +#ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); if ((argptr = strstr(argptr, "console=")) == NULL) { argptr = prom_getcmdline(); strcat(argptr, " console=ttyS1,115200"); } #endif +#endif } static void tx3927_setup(void); diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index fc0720599fd9..990fcb294bab 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -77,6 +77,11 @@ #include #include #endif +#ifdef CONFIG_SERIAL_TXX9 +#include +#include +#include +#endif #undef TOSHIBA_RBTX4927_SETUP_DEBUG @@ -920,12 +925,30 @@ void __init toshiba_rbtx4927_setup(void) #endif /* CONFIG_PCI */ +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + int i; + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (char *)(0xff1ff300 + i * 0x100); + req.mapbase = 0xff1ff300 + i * 0x100; + req.irq = 32 + i; + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = 50000000; + early_serial_txx9_setup(&req); + } + } #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); if (strstr(argptr, "console=") == NULL) { strcat(argptr, " console=ttyS0,38400"); } #endif +#endif #ifdef CONFIG_ROOT_NFS argptr = prom_getcmdline(); diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h index 86df317b4078..baf412967afa 100644 --- a/include/asm-mips/jmr3927/jmr3927.h +++ b/include/asm-mips/jmr3927/jmr3927.h @@ -201,20 +201,6 @@ static inline int jmr3927_have_isac(void) #endif /* !__ASSEMBLY__ */ -/* - * UART defines for serial.h - */ - -/* use Pre-scaler T0 (1/2) */ -#define JMR3927_BASE_BAUD (JMR3927_IMCLK / 2 / 16) - -#define UART0_ADDR 0xfffef300 -#define UART1_ADDR 0xfffef400 -#define UART0_INT JMR3927_IRQ_IRC_SIO0 -#define UART1_INT JMR3927_IRQ_IRC_SIO1 -#define UART0_FLAGS ASYNC_BOOT_AUTOCONF -#define UART1_FLAGS 0 - /* * IRQ mappings */ diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h index ce1043530e59..e796d75f027e 100644 --- a/include/asm-mips/serial.h +++ b/include/asm-mips/serial.h @@ -103,17 +103,6 @@ #define IVR_SERIAL_PORT_DEFNS #endif -#ifdef CONFIG_TOSHIBA_JMR3927 -#include -#define TXX927_SERIAL_PORT_DEFNS \ - { .baud_base = JMR3927_BASE_BAUD, .port = UART0_ADDR, .irq = UART0_INT, \ - .flags = UART0_FLAGS, .type = 1 }, \ - { .baud_base = JMR3927_BASE_BAUD, .port = UART1_ADDR, .irq = UART1_INT, \ - .flags = UART1_FLAGS, .type = 1 }, -#else -#define TXX927_SERIAL_PORT_DEFNS -#endif - #ifdef CONFIG_SERIAL_AU1X00 #include #ifdef CONFIG_SOC_AU1000 @@ -343,7 +332,6 @@ MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_SERIAL_PORT_DEFNS \ MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS \ - TXX927_SERIAL_PORT_DEFNS \ AU1000_SERIAL_PORT_DEFNS #endif /* _ASM_SERIAL_H */ -- GitLab From 77c728c2240a1eb45f7d355f5d87ecc319cd55ce Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 4 Mar 2005 19:36:51 +0000 Subject: [PATCH 0967/1519] Gcc 4.0 fixes. Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 10 ++++++---- arch/mips/mm/c-sb1.c | 2 +- include/asm-mips/paccess.h | 8 ++++---- 3 files changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 18c028ba9efa..663fa547ee18 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -261,11 +261,12 @@ asmlinkage int sys32_sigaction(int sig, const struct sigaction32 *act, if (act) { old_sigset_t mask; + s32 handler; if (!access_ok(VERIFY_READ, act, sizeof(*act))) return -EFAULT; - err |= __get_user((u32)(u64)new_ka.sa.sa_handler, - &act->sa_handler); + err |= __get_user(handler, &act->sa_handler); + new_ka.sa.sa_handler = (void*)(s64)handler; err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); err |= __get_user(mask, &act->sa_mask.sig[0]); if (err) @@ -826,12 +827,13 @@ asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 *act, goto out; if (act) { + s32 handler; int err = 0; if (!access_ok(VERIFY_READ, act, sizeof(*act))) return -EFAULT; - err |= __get_user((u32)(u64)new_sa.sa.sa_handler, - &act->sa_handler); + err |= __get_user(handler, &act->sa_handler); + new_sa.sa.sa_handler = (void*)(s64)handler; err |= __get_user(new_sa.sa.sa_flags, &act->sa_flags); err |= get_sigset(&new_sa.sa.sa_mask, &act->sa_mask); if (err) diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 502f68c664b2..e65b1bb576fd 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -235,7 +235,7 @@ static inline void __sb1_flush_icache_range(unsigned long start, /* * Invalidate all caches on this CPU */ -static void local_sb1___flush_cache_all(void) +static void __attribute_used__ local_sb1___flush_cache_all(void) { __sb1_writeback_inv_dcache_all(); __sb1_flush_icache_all(); diff --git a/include/asm-mips/paccess.h b/include/asm-mips/paccess.h index 309bc3099f68..46f2d23d2697 100644 --- a/include/asm-mips/paccess.h +++ b/include/asm-mips/paccess.h @@ -52,7 +52,7 @@ struct __large_pstruct { unsigned long buf[100]; }; }) #define __get_dbe_asm(insn) \ -({ \ +{ \ __asm__ __volatile__( \ "1:\t" insn "\t%1,%2\n\t" \ "move\t%0,$0\n" \ @@ -67,7 +67,7 @@ struct __large_pstruct { unsigned long buf[100]; }; ".previous" \ :"=r" (__gu_err), "=r" (__gu_val) \ :"o" (__mp(__gu_addr)), "i" (-EFAULT)); \ -}) +} extern void __get_dbe_unknown(void); @@ -90,7 +90,7 @@ extern void __get_dbe_unknown(void); }) #define __put_dbe_asm(insn) \ -({ \ +{ \ __asm__ __volatile__( \ "1:\t" insn "\t%1,%2\n\t" \ "move\t%0,$0\n" \ @@ -104,7 +104,7 @@ extern void __get_dbe_unknown(void); ".previous" \ : "=r" (__pu_err) \ : "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT)); \ -}) +} extern void __put_dbe_unknown(void); -- GitLab From 6d7bf017e821f3c093c80d1ee919d8d87904701c Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Fri, 4 Mar 2005 19:40:45 +0000 Subject: [PATCH 0968/1519] It helps to not use a _mem_ function for requesting I/O space. Signed-off-by: Ralf Baechle Signed-off-by: Ralf Baechle --- drivers/video/gbefb.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index d3c1922cb13a..485604cd4462 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -1126,7 +1126,7 @@ static int __init gbefb_probe(struct device *dev) gbefb_setup(options); #endif - if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { + if (!request_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { printk(KERN_ERR "gbefb: couldn't reserve mmio region\n"); ret = -EBUSY; goto out_release_framebuffer; @@ -1152,12 +1152,24 @@ static int __init gbefb_probe(struct device *dev) if (gbe_mem_phys) { /* memory was allocated at boot time */ gbe_mem = ioremap_nocache(gbe_mem_phys, gbe_mem_size); + if (!gbe_mem) { + printk(KERN_ERR "gbefb: couldn't map framebuffer\n"); + ret = -ENOMEM; + goto out_tiles_free; + } + gbe_dma_addr = 0; } else { /* try to allocate memory with the classical allocator * this has high chance to fail on low memory machines */ gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr, GFP_KERNEL); + if (!gbe_mem) { + printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n"); + ret = -ENOMEM; + goto out_tiles_free; + } + gbe_mem_phys = (unsigned long) gbe_dma_addr; } @@ -1165,12 +1177,6 @@ static int __init gbefb_probe(struct device *dev) mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1); #endif - if (!gbe_mem) { - printk(KERN_ERR "gbefb: couldn't map framebuffer\n"); - ret = -ENXIO; - goto out_tiles_free; - } - /* map framebuffer memory into tiles table */ for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++) gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i; -- GitLab From 07b4ebd372139eb64a2898f17f2cc387b22feba8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Mar 2005 15:40:34 +0000 Subject: [PATCH 0969/1519] Put salone.o back into arclib. It's a lib so doesn't harm if unused atm. Signed-off-by: Ralf Baechle --- arch/mips/arc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/arc/Makefile b/arch/mips/arc/Makefile index e8424932e1a3..4f349ec1ea2d 100644 --- a/arch/mips/arc/Makefile +++ b/arch/mips/arc/Makefile @@ -3,7 +3,7 @@ # lib-y += cmdline.o env.o file.o identify.o init.o \ - misc.o time.o tree.o + misc.o salone.o time.o tree.o lib-$(CONFIG_ARC_MEMORY) += memory.o lib-$(CONFIG_ARC_CONSOLE) += arc_con.o -- GitLab From 9ff77c469ed16221c6a4e882e48e4f0dcf451bda Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 8 Mar 2005 14:39:39 +0000 Subject: [PATCH 0970/1519] Export shm_align_mask and flush_data_cache_page. Signed-off-by: Ralf Baechle --- arch/mips/kernel/syscall.c | 3 +++ arch/mips/mm/cache.c | 2 ++ 2 files changed, 5 insertions(+) diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 21e3e13a4b44..8fde242596f9 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -56,6 +57,8 @@ asmlinkage int sys_pipe(nabi_no_regargs volatile struct pt_regs regs) unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ +EXPORT_SYMBOL(shm_align_mask); + #define COLOUR_ALIGN(addr,pgoff) \ ((((addr) + shm_align_mask) & ~shm_align_mask) + \ (((pgoff) << PAGE_SHIFT) & shm_align_mask)) diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index c0ac4f97e1ae..fe0110074902 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -33,6 +33,8 @@ void (*flush_cache_sigtramp)(unsigned long addr); void (*flush_data_cache_page)(unsigned long addr); void (*flush_icache_all)(void); +EXPORT_SYMBOL(flush_data_cache_page); + #ifdef CONFIG_DMA_NONCOHERENT /* DMA cache operations. */ -- GitLab From 96ed748d9da03d091799f8107fce27d218fd8f5c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 10 Mar 2005 17:34:03 +0000 Subject: [PATCH 0971/1519] qtronix.c: Handle kmalloc failure. Signed-off-by: Ralf Baechle --- drivers/char/qtronix.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/char/qtronix.c b/drivers/char/qtronix.c index 40a3cf62e1a8..601d09baf9d7 100644 --- a/drivers/char/qtronix.c +++ b/drivers/char/qtronix.c @@ -591,6 +591,11 @@ static int __init psaux_init(void) return retval; queue = (struct aux_queue *) kmalloc(sizeof(*queue), GFP_KERNEL); + if (!queue) { + misc_deregister(&psaux_mouse); + return -ENOMEM; + } + memset(queue, 0, sizeof(*queue)); queue->head = queue->tail = 0; init_waitqueue_head(&queue->proc_list); -- GitLab From 90a67b5909ed39425fd2402b2b4c46ef1372b300 Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Sun, 13 Mar 2005 00:07:00 +0000 Subject: [PATCH 0972/1519] sys_futex has 6 arguments. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall32-o32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 00e4a5ed1d81..9c4bb917d476 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -578,7 +578,7 @@ einval: li v0, -EINVAL sys sys_fremovexattr 2 /* 4235 */ sys sys_tkill 2 sys sys_sendfile64 5 - sys sys_futex 2 + sys sys_futex 6 sys sys_sched_setaffinity 3 sys sys_sched_getaffinity 3 /* 4240 */ sys sys_io_setup 2 -- GitLab From a3701ca48763bbc681ee8db3d203827975849185 Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Sun, 13 Mar 2005 08:19:05 +0000 Subject: [PATCH 0973/1519] When CONFIG_PM is enabled, it uses the TOY_MATCH2 interrupt as the system timer tick. Prior to this patch, if IDE IRQ probing occured, then the TOY_MATCH2 interrupt would be permanently disabled, and no system timer tick occurs. This patch corrects this situation by correctly registering the TOY_MATCH2 interrupt so that IDE IRQ probing doesn't have adverse side effects. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/irq.c | 36 ++++++++++++++++++++++------------ arch/mips/au1000/common/time.c | 5 ++--- 2 files changed, 26 insertions(+), 15 deletions(-) diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index ebf93bdbad14..6a25677bf3cb 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -293,8 +293,30 @@ static struct hw_interrupt_type level_irq_type = { }; #ifdef CONFIG_PM -void startup_match20_interrupt(void) +void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *)) { + static struct irqaction action; + /* This is a big problem.... since we didn't use request_irq + when kernel/irq.c calls probe_irq_xxx this interrupt will + be probed for usage. This will end up disabling the device :( + + Give it a bogus "action" pointer -- this will keep it from + getting auto-probed! + + By setting the status to match that of request_irq() we + can avoid it. --cgray + */ + action.dev_id = handler; + action.flags = 0; + action.mask = 0; + action.name = "Au1xxx TOY"; + action.handler = handler; + action.next = NULL; + + irq_desc[AU1000_TOY_MATCH2_INT].action = &action; + irq_desc[AU1000_TOY_MATCH2_INT].status + &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS); + local_enable_irq(AU1000_TOY_MATCH2_INT); } #endif @@ -517,17 +539,7 @@ void intc0_req1_irqdispatch(struct pt_regs *regs) irq = au_ffs(intc0_req1) - 1; intc0_req1 &= ~(1< #include -extern void startup_match20_interrupt(void); extern void do_softirq(void); extern volatile unsigned long wall_jiffies; unsigned long missed_heart_beats = 0; @@ -65,7 +64,7 @@ static unsigned int timerhi = 0, timerlo = 0; #ifdef CONFIG_PM #define MATCH20_INC 328 -extern void startup_match20_interrupt(void); +extern void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *)); static unsigned long last_pc0, last_match20; #endif @@ -446,7 +445,7 @@ void au1xxx_timer_setup(struct irqaction *irq) au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); au_sync(); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); - startup_match20_interrupt(); + startup_match20_interrupt(counter0_irq); do_gettimeoffset = do_fast_pm_gettimeoffset; -- GitLab From 71e0e556db08cc20de76d510be5600f6e5ce143c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 14 Mar 2005 10:16:59 +0000 Subject: [PATCH 0974/1519] Multithreaded core dumps. Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 8 ++++++++ include/asm-mips/elf.h | 2 ++ 2 files changed, 10 insertions(+) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 5223c4450e4c..2b7a44deb856 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -167,6 +167,14 @@ void dump_regs(elf_greg_t *gp, struct pt_regs *regs) #endif } +int dump_task_regs (struct task_struct *tsk, elf_gregset_t *regs) +{ + struct thread_info *ti = tsk->thread_info; + long ksp = (unsigned long)ti + THREAD_SIZE - 32; + dump_regs(&(*regs)[0], (struct pt_regs *) ksp - 1); + return 1; +} + int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr) { memcpy(fpr, &t->thread.fpu, sizeof(current->thread.fpu)); diff --git a/include/asm-mips/elf.h b/include/asm-mips/elf.h index a743da55e110..bb031f3cd4db 100644 --- a/include/asm-mips/elf.h +++ b/include/asm-mips/elf.h @@ -225,10 +225,12 @@ do { current->thread.mflags &= ~MF_ABI_MASK; \ #endif /* CONFIG_64BIT */ extern void dump_regs(elf_greg_t *, struct pt_regs *regs); +extern int dump_task_regs (struct task_struct *, elf_gregset_t *); extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); #define ELF_CORE_COPY_REGS(elf_regs, regs) \ dump_regs((elf_greg_t *)&(elf_regs), regs); +#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \ dump_task_fpu(tsk, elf_fpregs) -- GitLab From b4dbf95e3080cf43a27cc324bfa0975f88174d07 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Mar 2005 10:23:31 +0000 Subject: [PATCH 0975/1519] Get rid of the the remains of 2.4-style ramdisk support. Signed-off-by: Ralf Baechle --- arch/mips/kernel/vmlinux.lds.S | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index ff345f2c42c2..25cc856d8e7e 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -54,13 +54,6 @@ SECTIONS *(.data) - /* Align the initial ramdisk image (INITRD) on page boundaries. */ - . = ALIGN(4096); - __rd_start = .; - *(.initrd) - . = ALIGN(4096); - __rd_end = .; - CONSTRUCTORS } _gp = . + 0x8000; -- GitLab From 1592dac2410511d24836e18d416b1d02c678322b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 17 Mar 2005 21:50:49 +0000 Subject: [PATCH 0976/1519] Reformatting, remove debugging code. Signed-off-by: Ralf Baechle --- arch/mips/kernel/irixioctl.c | 63 +++++++++++++++--------------------- include/asm-mips/inventory.h | 8 +++-- 2 files changed, 32 insertions(+), 39 deletions(-) diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c index 3cdc22346f4c..e2863821a3dd 100644 --- a/arch/mips/kernel/irixioctl.c +++ b/arch/mips/kernel/irixioctl.c @@ -59,7 +59,7 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg) { struct tty_struct *tp, *rtp; mm_segment_t old_fs; - int error = 0; + int i, error = 0; #ifdef DEBUG_IOCTLS printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd); @@ -74,12 +74,13 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg) case 0x0000540d: { struct termios kt; - struct irix_termios *it = (struct irix_termios *) arg; + struct irix_termios __user *it = + (struct irix_termios __user *) arg; #ifdef DEBUG_IOCTLS printk("TCGETS, %08lx) ", arg); #endif - if(!access_ok(VERIFY_WRITE, it, sizeof(*it))) { + if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) { error = -EFAULT; break; } @@ -88,13 +89,14 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg) set_fs(old_fs); if (error) break; - __put_user(kt.c_iflag, &it->c_iflag); - __put_user(kt.c_oflag, &it->c_oflag); - __put_user(kt.c_cflag, &it->c_cflag); - __put_user(kt.c_lflag, &it->c_lflag); - for(error = 0; error < NCCS; error++) - __put_user(kt.c_cc[error], &it->c_cc[error]); - error = 0; + + error = __put_user(kt.c_iflag, &it->c_iflag); + error |= __put_user(kt.c_oflag, &it->c_oflag); + error |= __put_user(kt.c_cflag, &it->c_cflag); + error |= __put_user(kt.c_lflag, &it->c_lflag); + + for (i = 0; i < NCCS; i++) + error |= __put_user(kt.c_cc[i], &it->c_cc[i]); break; } @@ -112,14 +114,19 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg) old_fs = get_fs(); set_fs(get_ds()); error = sys_ioctl(fd, TCGETS, (unsigned long) &kt); set_fs(old_fs); - if(error) + if (error) + break; + + error = __get_user(kt.c_iflag, &it->c_iflag); + error |= __get_user(kt.c_oflag, &it->c_oflag); + error |= __get_user(kt.c_cflag, &it->c_cflag); + error |= __get_user(kt.c_lflag, &it->c_lflag); + + for (i = 0; i < NCCS; i++) + error |= __get_user(kt.c_cc[i], &it->c_cc[i]); + + if (error) break; - __get_user(kt.c_iflag, &it->c_iflag); - __get_user(kt.c_oflag, &it->c_oflag); - __get_user(kt.c_cflag, &it->c_cflag); - __get_user(kt.c_lflag, &it->c_lflag); - for(error = 0; error < NCCS; error++) - __get_user(kt.c_cc[error], &it->c_cc[error]); old_fs = get_fs(); set_fs(get_ds()); error = sys_ioctl(fd, TCSETS, (unsigned long) &kt); set_fs(old_fs); @@ -153,7 +160,7 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg) #ifdef DEBUG_IOCTLS printk("rtp->session=%d ", rtp->session); #endif - error = put_user(rtp->session, (unsigned long *) arg); + error = put_user(rtp->session, (unsigned long __user *) arg); break; case 0x746e: @@ -195,50 +202,32 @@ asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg) break; case 0x8004667e: -#ifdef DEBUG_IOCTLS - printk("FIONBIO, %08lx) arg=%d ", arg, *(int *)arg); -#endif error = sys_ioctl(fd, FIONBIO, arg); break; case 0x80047476: -#ifdef DEBUG_IOCTLS - printk("TIOCSPGRP, %08lx) arg=%d ", arg, *(int *)arg); -#endif error = sys_ioctl(fd, TIOCSPGRP, arg); break; case 0x8020690c: -#ifdef DEBUG_IOCTLS - printk("SIOCSIFADDR, %08lx) arg=%d ", arg, *(int *)arg); -#endif error = sys_ioctl(fd, SIOCSIFADDR, arg); break; case 0x80206910: -#ifdef DEBUG_IOCTLS - printk("SIOCSIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg); -#endif error = sys_ioctl(fd, SIOCSIFFLAGS, arg); break; case 0xc0206911: -#ifdef DEBUG_IOCTLS - printk("SIOCGIFFLAGS, %08lx) arg=%d ", arg, *(int *)arg); -#endif error = sys_ioctl(fd, SIOCGIFFLAGS, arg); break; case 0xc020691b: -#ifdef DEBUG_IOCTLS - printk("SIOCGIFMETRIC, %08lx) arg=%d ", arg, *(int *)arg); -#endif error = sys_ioctl(fd, SIOCGIFMETRIC, arg); break; default: { #ifdef DEBUG_MISSING_IOCTL - char *msg = "Unimplemented IOCTL cmd tell linux@engr.sgi.com\n"; + char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n"; #ifdef DEBUG_IOCTLS printk("UNIMP_IOCTL, %08lx)\n", arg); diff --git a/include/asm-mips/inventory.h b/include/asm-mips/inventory.h index 4cd36fe98173..92d90f75a636 100644 --- a/include/asm-mips/inventory.h +++ b/include/asm-mips/inventory.h @@ -4,6 +4,8 @@ #ifndef __ASM_INVENTORY_H #define __ASM_INVENTORY_H +#include + typedef struct inventory_s { struct inventory_s *inv_next; int inv_class; @@ -14,7 +16,9 @@ typedef struct inventory_s { } inventory_t; extern int inventory_items; -void add_to_inventory (int class, int type, int controller, int unit, int state); -int dump_inventory_to_user (void *userbuf, int size); + +extern void add_to_inventory (int class, int type, int controller, int unit, int state); +extern int dump_inventory_to_user (void __user *userbuf, int size); +extern int __init init_inventory(void); #endif /* __ASM_INVENTORY_H */ -- GitLab From 53de0d471fe8ddbbeca938cffedb4cc94e04da10 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 18 Mar 2005 17:36:42 +0000 Subject: [PATCH 0977/1519] Reformat; cosmetic cleanups. Signed-off-by: Ralf Baechle --- arch/mips/mm/cache.c | 3 ++- include/asm-mips/cacheflush.h | 31 ++++++++++++++++++------------- 2 files changed, 20 insertions(+), 14 deletions(-) diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index fe0110074902..eaecb8631973 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -23,7 +23,8 @@ void (*__flush_cache_all)(void); void (*flush_cache_mm)(struct mm_struct *mm); void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start, unsigned long end); -void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); +void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, + unsigned long pfn); void (*flush_icache_range)(unsigned long __user start, unsigned long __user end); void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page); diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h index 3711d720aeb4..4213d2c8bb8a 100644 --- a/include/asm-mips/cacheflush.h +++ b/include/asm-mips/cacheflush.h @@ -54,19 +54,24 @@ extern void (*flush_icache_range)(unsigned long __user start, #define flush_cache_vmap(start, end) flush_cache_all() #define flush_cache_vunmap(start, end) flush_cache_all() -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - if (cpu_has_dc_aliases) \ - flush_cache_page(vma, vaddr); \ - memcpy(dst, (void *) src, len); \ - flush_icache_page(vma, page); \ -} while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - if (cpu_has_dc_aliases) \ - flush_cache_page(vma, vaddr); \ - memcpy(dst, src, len); \ -} while (0) +static inline void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + if (cpu_has_dc_aliases) + flush_cache_page(vma, vaddr, page_to_pfn(page)); + memcpy(dst, src, len); + flush_icache_page(vma, page); +} + +static inline void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + if (cpu_has_dc_aliases) + flush_cache_page(vma, vaddr, page_to_pfn(page)); + memcpy(dst, src, len); +} extern void (*flush_cache_sigtramp)(unsigned long addr); extern void (*flush_icache_all)(void); -- GitLab From 127c6f662348cbf2b1c09e6fc2748af316f7d2d6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 18 Mar 2005 17:36:42 +0000 Subject: [PATCH 0978/1519] SECCOMP for MIPS. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 17 +++++++++++++++++ include/asm-mips/thread_info.h | 10 ++++++---- 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 41d782e207c3..b54ac9a75d5f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1530,6 +1530,23 @@ config BINFMT_ELF32 bool default y if MIPS32_O32 || MIPS32_N32 +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS && BROKEN + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via /proc//seccomp, it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. Only embedded should say N here. + config PM bool "Power Management support (EXPERIMENTAL)" depends on EXPERIMENTAL && MACH_AU1X00 diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h index a70cb0854c8a..66a0c2ae7d65 100644 --- a/include/asm-mips/thread_info.h +++ b/include/asm-mips/thread_info.h @@ -114,6 +114,7 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_SIGPENDING 2 /* signal pending */ #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ #define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */ +#define TIF_SECCOMP 5 /* secure computing */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 @@ -124,13 +125,14 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define _TIF_SIGPENDING (1< Date: Fri, 18 Mar 2005 17:36:42 +0000 Subject: [PATCH 0979/1519] Use compat_sigval_t in struct compat_siginfo. Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 663fa547ee18..e8c380dceb86 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -78,7 +78,7 @@ typedef struct compat_siginfo { struct { timer_t _tid; /* timer id */ int _overrun; /* overrun count */ - sigval_t32 _sigval; /* same as below */ + compat_sigval_t _sigval;/* same as below */ int _sys_private; /* not to be passed to user */ } _timer; -- GitLab From 6cbe0631591ca45177d52364dec81cdfba19fec0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 20 Mar 2005 22:57:38 +0000 Subject: [PATCH 0980/1519] R4300 delay slot. Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 248537cebc89..bcf87a2b554c 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -830,6 +830,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, i_nop(p); break; + case CPU_R4300: case CPU_R4600: case CPU_R4700: case CPU_R5000: -- GitLab From 4f12bfe5a498747a9a66f135a67aa8e1caa819dc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 21 Mar 2005 18:59:38 +0000 Subject: [PATCH 0981/1519] HUB interrupts are allocated per node, not per slice. Make manipulation of the interrupt mask register atomic by disabling interrupts. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip27/ip27-init.c | 44 ++++++++++++++---------------- arch/mips/sgi-ip27/ip27-irq.c | 50 ++++++++++++++++++---------------- 2 files changed, 48 insertions(+), 46 deletions(-) diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index ad1e86b54fae..8651a0e75404 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -56,12 +56,12 @@ static void __init per_hub_init(cnodeid_t cnode) { struct hub_data *hub = hub_data(cnode); nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); + int i; cpu_set(smp_processor_id(), hub->h_cpus); if (test_and_set_bit(cnode, hub_init_mask)) return; - /* * Set CRB timeout at 5ms, (< PI timeout of 10ms) */ @@ -88,6 +88,24 @@ static void __init per_hub_init(cnodeid_t cnode) __flush_cache_all(); } #endif + + /* + * Some interrupts are reserved by hardware or by software convention. + * Mark these as reserved right away so they won't be used accidently + * later. + */ + for (i = 0; i <= BASE_PCI_IRQ; i++) { + __set_bit(i, hub->irq_alloc_mask); + LOCAL_HUB_CLR_INTR(INT_PEND0_BASELVL + i); + } + + __set_bit(IP_PEND0_6_63, hub->irq_alloc_mask); + LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63); + + for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) { + __set_bit(i, hub->irq_alloc_mask); + LOCAL_HUB_CLR_INTR(INT_PEND1_BASELVL + i); + } } void __init per_cpu_init(void) @@ -104,29 +122,11 @@ void __init per_cpu_init(void) clear_c0_status(ST0_IM); + per_hub_init(cnode); + for (i = 0; i < LEVELS_PER_SLICE; i++) si->level_to_irq[i] = -1; - /* - * Some interrupts are reserved by hardware or by software convention. - * Mark these as reserved right away so they won't be used accidently - * later. - */ - for (i = 0; i <= BASE_PCI_IRQ; i++) { - __set_bit(i, si->irq_alloc_mask); - LOCAL_HUB_S(PI_INT_PEND_MOD, i); - } - - __set_bit(IP_PEND0_6_63, si->irq_alloc_mask); - LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63); - - for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) { - __set_bit(i, si->irq_alloc_mask + 1); - LOCAL_HUB_S(PI_INT_PEND_MOD, i); - } - - LOCAL_HUB_L(PI_INT_PEND0); - /* * We use this so we can find the local hub's data as fast as only * possible. @@ -140,8 +140,6 @@ void __init per_cpu_init(void) install_cpu_nmi_handler(cputoslice(cpu)); set_c0_status(SRB_DEV0 | SRB_DEV1); - - per_hub_init(cnode); } /* diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 61817a18aed2..5d374e6ce63d 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -74,14 +74,15 @@ extern int irq_to_slot[]; static inline int alloc_level(int cpu, int irq) { + struct hub_data *hub = hub_data(cpu_to_node(cpu)); struct slice_data *si = cpu_data[cpu].data; - int level; /* pre-allocated entries */ + int level; - level = find_first_zero_bit(si->irq_alloc_mask, LEVELS_PER_SLICE); + level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE); if (level >= LEVELS_PER_SLICE) panic("Cpu %d flooded with devices\n", cpu); - __set_bit(level, si->irq_alloc_mask); + __set_bit(level, hub->irq_alloc_mask); si->level_to_irq[level] = irq; return level; @@ -216,9 +217,11 @@ static int intr_connect_level(int cpu, int bit) { nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); struct slice_data *si = cpu_data[cpu].data; + unsigned long flags; - __set_bit(bit, si->irq_enable_mask); + set_bit(bit, si->irq_enable_mask); + local_irq_save(flags); if (!cputoslice(cpu)) { REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]); REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]); @@ -226,6 +229,7 @@ static int intr_connect_level(int cpu, int bit) REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]); REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]); } + local_irq_restore(flags); return 0; } @@ -235,7 +239,7 @@ static int intr_disconnect_level(int cpu, int bit) nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); struct slice_data *si = cpu_data[cpu].data; - __clear_bit(bit, si->irq_enable_mask); + clear_bit(bit, si->irq_enable_mask); if (!cputoslice(cpu)) { REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]); @@ -298,6 +302,7 @@ static unsigned int startup_bridge_irq(unsigned int irq) static void shutdown_bridge_irq(unsigned int irq) { struct bridge_controller *bc = IRQ_TO_BRIDGE(irq); + struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu)); bridge_t *bridge = bc->base; struct slice_data *si = cpu_data[bc->irq_cpu].data; int pin, swlevel; @@ -313,7 +318,7 @@ static void shutdown_bridge_irq(unsigned int irq) swlevel = find_level(&cpu, irq); intr_disconnect_level(cpu, swlevel); - __clear_bit(swlevel, si->irq_alloc_mask); + __clear_bit(swlevel, hub->irq_alloc_mask); si->level_to_irq[swlevel] = -1; bridge->b_int_enable &= ~(1 << pin); @@ -433,25 +438,24 @@ void install_ipi(void) int slice = LOCAL_HUB_L(PI_CPU_NUM); int cpu = smp_processor_id(); struct slice_data *si = cpu_data[cpu].data; - hubreg_t mask, set; + struct hub_data *hub = hub_data(cpu_to_node(cpu)); + int resched, call; + + resched = CPU_RESCHED_A_IRQ + slice; + __set_bit(resched, hub->irq_alloc_mask); + __set_bit(resched, si->irq_enable_mask); + LOCAL_HUB_CLR_INTR(resched); + + call = CPU_CALL_A_IRQ + slice; + __set_bit(call, hub->irq_alloc_mask); + __set_bit(call, si->irq_enable_mask); + LOCAL_HUB_CLR_INTR(call); if (slice == 0) { - LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ); - LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ); - mask = LOCAL_HUB_L(PI_INT_MASK0_A); /* Slice A */ - set = (1UL << CPU_RESCHED_A_IRQ) | (1UL << CPU_CALL_A_IRQ); - mask |= set; - si->irq_enable_mask[0] |= set; - si->irq_alloc_mask[0] |= set; - LOCAL_HUB_S(PI_INT_MASK0_A, mask); + LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]); + LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]); } else { - LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ); - LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ); - mask = LOCAL_HUB_L(PI_INT_MASK0_B); /* Slice B */ - set = (1UL << CPU_RESCHED_B_IRQ) | (1UL << CPU_CALL_B_IRQ); - mask |= set; - si->irq_enable_mask[1] |= set; - si->irq_alloc_mask[1] |= set; - LOCAL_HUB_S(PI_INT_MASK0_B, mask); + LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]); + LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]); } } -- GitLab From 7c2740f1c1a7ff2767a92042f39edad7fad95c92 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 21 Mar 2005 19:35:53 +0000 Subject: [PATCH 0982/1519] HUB interrupts are allocated per node, not per slice. Make manipulation of the interrupt mask register atomic by disabling interrupts. Signed-off-by: Ralf Baechle --- include/asm-mips/mach-ip27/mmzone.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-mips/mach-ip27/mmzone.h b/include/asm-mips/mach-ip27/mmzone.h index d3f566362e9d..986a3b9b59a7 100644 --- a/include/asm-mips/mach-ip27/mmzone.h +++ b/include/asm-mips/mach-ip27/mmzone.h @@ -10,7 +10,6 @@ #define LEVELS_PER_SLICE 128 struct slice_data { - unsigned long irq_alloc_mask[2]; unsigned long irq_enable_mask[2]; int level_to_irq[LEVELS_PER_SLICE]; }; @@ -20,6 +19,7 @@ struct hub_data { DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW); cpumask_t h_cpus; unsigned long slice_map; + unsigned long irq_alloc_mask[2]; struct slice_data slice[2]; }; -- GitLab From 1b3a6e975cbe81c5abc55e4c1b9f5b5250c5f20e Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Fri, 1 Apr 2005 14:07:13 +0000 Subject: [PATCH 0983/1519] Fix 64bit SMP TLB handler and stack frame handling, optimize 32bit SMP TLB handlers a bit, match definitions in pgtable-{32,64}.h better. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/kernel/head.S | 1 + arch/mips/mm/tlbex.c | 50 ++++++++++++++-------------------- include/asm-mips/mmu_context.h | 4 +-- include/asm-mips/pgtable-64.h | 10 ++++--- include/asm-mips/stackframe.h | 10 +++---- 5 files changed, 34 insertions(+), 41 deletions(-) diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 124c27e908f4..9f6927169358 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -157,6 +157,7 @@ NESTED(kernel_entry, 16, sp) # kernel entry point LONG_S a2, fw_arg2 LONG_S a3, fw_arg3 + MTC0 zero, CP0_CONTEXT # clear context register PTR_LA $28, init_thread_union PTR_ADDIU sp, $28, _THREAD_SIZE - 32 set_saved_sp sp, t0, t1 diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index bcf87a2b554c..018f7527a724 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -91,7 +91,7 @@ enum opcode { insn_addu, insn_addiu, insn_and, insn_andi, insn_beq, insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl, insn_bne, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0, - insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32, + insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_ori, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll, @@ -134,7 +134,6 @@ static __initdata struct insn insn_table[] = { { insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE }, { insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE }, { insn_dsrl, M(spec_op,0,0,0,0,dsrl_op), RT | RD | RE }, - { insn_dsrl32, M(spec_op,0,0,0,0,dsrl32_op), RT | RD | RE }, { insn_dsubu, M(spec_op,0,0,0,0,dsubu_op), RS | RT | RD }, { insn_eret, M(cop0_op,cop_op,0,0,0,eret_op), 0 }, { insn_j, M(j_op,0,0,0,0,0), JIMM }, @@ -366,7 +365,6 @@ I_u2u1u3(_dsll); I_u2u1u3(_dsll32); I_u2u1u3(_dsra); I_u2u1u3(_dsrl); -I_u2u1u3(_dsrl32); I_u3u1u2(_dsubu); I_0(_eret); I_u1(_j); @@ -944,34 +942,29 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r, /* No i_nop needed here, since the next insn doesn't touch TMP. */ #ifdef CONFIG_SMP +# ifdef CONFIG_BUILD_ELF64 /* - * 64 bit SMP has the lower part of &pgd_current[smp_processor_id()] + * 64 bit SMP running in XKPHYS has smp_processor_id() << 3 * stored in CONTEXT. */ - if (in_compat_space_p(pgdc)) { - i_dmfc0(p, ptr, C0_CONTEXT); - i_dsra(p, ptr, ptr, 23); - i_ld(p, ptr, 0, ptr); - } else { -#ifdef CONFIG_BUILD_ELF64 - i_dmfc0(p, ptr, C0_CONTEXT); - i_dsrl(p, ptr, ptr, 23); - i_dsll(p, ptr, ptr, 3); - i_LA_mostly(p, tmp, pgdc); - i_daddu(p, ptr, ptr, tmp); - i_dmfc0(p, tmp, C0_BADVADDR); - i_ld(p, ptr, rel_lo(pgdc), ptr); -#else - i_dmfc0(p, ptr, C0_CONTEXT); - i_lui(p, tmp, rel_highest(pgdc)); - i_dsll(p, ptr, ptr, 9); - i_daddiu(p, tmp, tmp, rel_higher(pgdc)); - i_dsrl32(p, ptr, ptr, 0); - i_and(p, ptr, ptr, tmp); - i_dmfc0(p, tmp, C0_BADVADDR); - i_ld(p, ptr, 0, ptr); -#endif - } + i_dmfc0(p, ptr, C0_CONTEXT); + i_dsrl(p, ptr, ptr, 23); + i_LA_mostly(p, tmp, pgdc); + i_daddu(p, ptr, ptr, tmp); + i_dmfc0(p, tmp, C0_BADVADDR); + i_ld(p, ptr, rel_lo(pgdc), ptr); +# else + /* + * 64 bit SMP running in compat space has the lower part of + * &pgd_current[smp_processor_id()] stored in CONTEXT. + */ + if (!in_compat_space_p(pgdc)) + panic("Invalid page directory address!"); + + i_dmfc0(p, ptr, C0_CONTEXT); + i_dsra(p, ptr, ptr, 23); + i_ld(p, ptr, 0, ptr); +# endif #else i_LA_mostly(p, ptr, pgdc); i_ld(p, ptr, rel_lo(pgdc), ptr); @@ -1028,7 +1021,6 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) i_mfc0(p, ptr, C0_CONTEXT); i_LA_mostly(p, tmp, pgdc); i_srl(p, ptr, ptr, 23); - i_sll(p, ptr, ptr, 2); i_addu(p, ptr, tmp, ptr); #else i_LA_mostly(p, ptr, pgdc); diff --git a/include/asm-mips/mmu_context.h b/include/asm-mips/mmu_context.h index 45cd72d172e8..19cdf7642e66 100644 --- a/include/asm-mips/mmu_context.h +++ b/include/asm-mips/mmu_context.h @@ -30,7 +30,7 @@ extern unsigned long pgd_current[]; #ifdef CONFIG_32BIT #define TLBMISS_HANDLER_SETUP() \ - write_c0_context((unsigned long) smp_processor_id() << 23); \ + write_c0_context((unsigned long) smp_processor_id() << 25); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif #if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64) @@ -40,7 +40,7 @@ extern unsigned long pgd_current[]; #endif #if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64) #define TLBMISS_HANDLER_SETUP() \ - write_c0_context((unsigned long) smp_processor_id() << 23); \ + write_c0_context((unsigned long) smp_processor_id() << 26); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h index 35007250ac2b..3e0a522c0f0e 100644 --- a/include/asm-mips/pgtable-64.h +++ b/include/asm-mips/pgtable-64.h @@ -114,7 +114,7 @@ extern pmd_t invalid_pmd_table[PTRS_PER_PMD]; extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD]; /* - * Empty pmd entries point to the invalid_pte_table. + * Empty pgd/pmd entries point to the invalid_pte_table. */ static inline int pmd_none(pmd_t pmd) { @@ -156,7 +156,8 @@ static inline void pud_clear(pud_t *pudp) pud_val(*pudp) = ((unsigned long) invalid_pmd_table); } -#define pte_page(x) pfn_to_page((unsigned long)((pte_val(x) >> PAGE_SHIFT))) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + #ifdef CONFIG_CPU_VR41XX #define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) #define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) @@ -167,12 +168,14 @@ static inline void pud_clear(pud_t *pudp) #define __pgd_offset(address) pgd_index(address) #define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) +#define __pmd_offset(address) pmd_index(address) #define page_pte(page) page_pte_prot(page, __pgprot(0)) /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(address) pgd_offset(&init_mm, 0) #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) /* to find an entry in a page-table-directory */ #define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr)) @@ -185,8 +188,7 @@ static inline unsigned long pud_page(pud_t pud) /* Find an entry in the second-level page table.. */ static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address) { - return (pmd_t *) pud_page(*pud) + - ((address >> PMD_SHIFT) & (PTRS_PER_PMD - 1)); + return (pmd_t *) pud_page(*pud) + pmd_index(address); } /* Find an entry in the third-level page table.. */ diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h index e33e302c3429..de303e96260e 100644 --- a/include/asm-mips/stackframe.h +++ b/include/asm-mips/stackframe.h @@ -60,7 +60,6 @@ mfc0 k0, CP0_CONTEXT lui k1, %hi(kernelsp) srl k0, k0, 23 - sll k0, k0, 2 addu k1, k0 LONG_L k1, %lo(kernelsp)(k1) #endif @@ -76,12 +75,12 @@ #endif #if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64) MFC0 k1, CP0_CONTEXT - dsrl k1, 23 - dsll k1, k1, 3 lui k0, %highest(kernelsp) + dsrl k1, 23 daddiu k0, %higher(kernelsp) dsll k0, k0, 16 daddiu k0, %hi(kernelsp) + dsll k0, k0, 16 daddu k1, k1, k0 LONG_L k1, %lo(kernelsp)(k1) #endif @@ -91,7 +90,6 @@ #ifdef CONFIG_32BIT mfc0 \temp, CP0_CONTEXT srl \temp, 23 - sll \temp, 2 LONG_S \stackp, kernelsp(\temp) #endif #if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64) @@ -102,8 +100,8 @@ LONG_S \stackp, %lo(kernelsp)(\temp) #endif #if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64) - lw \temp, TI_CPU(gp) - dsll \temp, 3 + MFC0 \temp, CP0_CONTEXT + dsrl \temp, 23 LONG_S \stackp, kernelsp(\temp) #endif .endm -- GitLab From 202d0388e747d7e9b70fc0efc2a5637812b722c1 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 1 Apr 2005 17:53:33 +0000 Subject: [PATCH 0984/1519] Remove useless casts. Fix formatting. Signed-off-by: Ralf Baechle --- arch/mips/mm/pg-sb1.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c index 162bb155e695..148c65b9cd8b 100644 --- a/arch/mips/mm/pg-sb1.c +++ b/arch/mips/mm/pg-sb1.c @@ -60,7 +60,8 @@ static inline void clear_page_cpu(void *page) " .set noreorder \n" #ifdef CONFIG_CPU_HAS_PREFETCH " daddiu %0, %0, 128 \n" - " pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%0) \n" /* Prefetch the first 4 lines */ + " pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%0) \n" + /* Prefetch the first 4 lines */ " pref " SB1_PREF_STORE_STREAMED_HINT ", -96(%0) \n" " pref " SB1_PREF_STORE_STREAMED_HINT ", -64(%0) \n" " pref " SB1_PREF_STORE_STREAMED_HINT ", -32(%0) \n" @@ -106,7 +107,8 @@ static inline void copy_page_cpu(void *to, void *from) #ifdef CONFIG_CPU_HAS_PREFETCH " daddiu %0, %0, 128 \n" " daddiu %1, %1, 128 \n" - " pref " SB1_PREF_LOAD_STREAMED_HINT ", -128(%0)\n" /* Prefetch the first 4 lines */ + " pref " SB1_PREF_LOAD_STREAMED_HINT ", -128(%0)\n" + /* Prefetch the first 4 lines */ " pref " SB1_PREF_STORE_STREAMED_HINT ", -128(%1)\n" " pref " SB1_PREF_LOAD_STREAMED_HINT ", -96(%0)\n" " pref " SB1_PREF_STORE_STREAMED_HINT ", -96(%1)\n" @@ -207,15 +209,18 @@ typedef struct dmadscr_s { u64 pad_b; } dmadscr_t; -static dmadscr_t page_descr[DM_NUM_CHANNELS] __attribute__((aligned(SMP_CACHE_BYTES))); +static dmadscr_t page_descr[DM_NUM_CHANNELS] + __attribute__((aligned(SMP_CACHE_BYTES))); void sb1_dma_init(void) { int i; for (i = 0; i < DM_NUM_CHANNELS; i++) { - u64 base_val = (u64)CPHYSADDR(&page_descr[i]) | V_DM_DSCR_BASE_RINGSZ(1); - void *base_reg = (void *)IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE)); + const u64 base_val = CPHYSADDR(&page_descr[i]) | + V_DM_DSCR_BASE_RINGSZ(1); + volatile void *base_reg = + IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE)); __raw_writeq(base_val, base_reg); __raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg); @@ -225,14 +230,15 @@ void sb1_dma_init(void) void clear_page(void *page) { - u64 to_phys = (u64)CPHYSADDR(page); + u64 to_phys = CPHYSADDR(page); unsigned int cpu = smp_processor_id(); /* if the page is not in KSEG0, use old way */ if ((long)KSEGX(page) != (long)CKSEG0) return clear_page_cpu(page); - page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; + page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_ZERO_MEM | + M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); @@ -248,8 +254,8 @@ void clear_page(void *page) void copy_page(void *to, void *from) { - u64 from_phys = (u64)CPHYSADDR(from); - u64 to_phys = (u64)CPHYSADDR(to); + u64 from_phys = CPHYSADDR(from); + u64 to_phys = CPHYSADDR(to); unsigned int cpu = smp_processor_id(); /* if any page is not in KSEG0, use old way */ @@ -257,15 +263,16 @@ void copy_page(void *to, void *from) || (long)KSEGX(from) != (long)CKSEG0) return copy_page_cpu(to, from); - page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT; + page_descr[cpu].dscr_a = to_phys | M_DM_DSCRA_L2C_DEST | + M_DM_DSCRA_INTERRUPT; page_descr[cpu].dscr_b = from_phys | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE); - __raw_writeq(1, (void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); + __raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT))); /* * Don't really want to do it this way, but there's no * reliable way to delay completion detection. */ - while (!(__raw_readq((void *)IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG))) + while (!(__raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE_DEBUG))) & M_DM_DSCR_BASE_INTERRUPT)) ; __raw_readq(IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE))); -- GitLab From 172546bf601356f94f8018af7908a9b7c1c4915c Mon Sep 17 00:00:00 2001 From: Thiemo Seufer Date: Sat, 2 Apr 2005 10:21:56 +0000 Subject: [PATCH 0985/1519] Fix race conditions for read_c0_entryhi. Remove broken ASID masks in tlb-sb1.c. Make tlb-r4k.c and tlb-sb1.c more similiar and more efficient. Signed-off-by: Thiemo Seufer Signed-off-by: Ralf Baechle --- arch/mips/mm/tlb-r4k.c | 49 +++++++++++++++++++++-------------- arch/mips/mm/tlb-sb1.c | 59 ++++++++++++++++++++++++------------------ 2 files changed, 63 insertions(+), 45 deletions(-) diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 08702202758d..316c8a3d6b53 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -21,6 +21,12 @@ extern void build_tlb_refill_handler(void); +/* + * Make sure all entries differ. If they're not different + * MIPS32 will take revenge ... + */ +#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1))) + /* CP0 hazard avoidance. */ #define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ "nop; nop; nop; nop; nop; nop;\n\t" \ @@ -42,11 +48,8 @@ void local_flush_tlb_all(void) /* Blast 'em all away. */ while (entry < current_cpu_data.tlbsize) { - /* - * Make sure all entries differ. If they're not different - * MIPS32 will take revenge ... - */ - write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1))); + /* Make sure all entries differ. */ + write_c0_entryhi(UNIQUE_ENTRYHI(entry)); write_c0_index(entry); mtc0_tlbw_hazard(); tlb_write_indexed(); @@ -57,12 +60,21 @@ void local_flush_tlb_all(void) local_irq_restore(flags); } +/* All entries common to a mm share an asid. To effectively flush + these entries, we just bump the asid. */ void local_flush_tlb_mm(struct mm_struct *mm) { - int cpu = smp_processor_id(); + int cpu; + + preempt_disable(); - if (cpu_context(cpu, mm) != 0) - drop_mmu_context(mm,cpu); + cpu = smp_processor_id(); + + if (cpu_context(cpu, mm) != 0) { + drop_mmu_context(mm, cpu); + } + + preempt_enable(); } void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, @@ -75,9 +87,9 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long flags; int size; - local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; + local_irq_save(flags); if (size <= current_cpu_data.tlbsize/2) { int oldpid = read_c0_entryhi(); int newpid = cpu_asid(cpu, mm); @@ -99,8 +111,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, if (idx < 0) continue; /* Make sure all entries differ. */ - write_c0_entryhi(CKSEG0 + - (idx << (PAGE_SHIFT + 1))); + write_c0_entryhi(UNIQUE_ENTRYHI(idx)); mtc0_tlbw_hazard(); tlb_write_indexed(); } @@ -118,9 +129,9 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) unsigned long flags; int size; - local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; + local_irq_save(flags); if (size <= current_cpu_data.tlbsize / 2) { int pid = read_c0_entryhi(); @@ -142,7 +153,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) if (idx < 0) continue; /* Make sure all entries differ. */ - write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1))); + write_c0_entryhi(UNIQUE_ENTRYHI(idx)); mtc0_tlbw_hazard(); tlb_write_indexed(); } @@ -176,7 +187,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) if (idx < 0) goto finish; /* Make sure all entries differ. */ - write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1))); + write_c0_entryhi(UNIQUE_ENTRYHI(idx)); mtc0_tlbw_hazard(); tlb_write_indexed(); tlbw_use_hazard(); @@ -197,8 +208,8 @@ void local_flush_tlb_one(unsigned long page) int oldpid, idx; local_irq_save(flags); - page &= (PAGE_MASK << 1); oldpid = read_c0_entryhi(); + page &= (PAGE_MASK << 1); write_c0_entryhi(page); mtc0_tlbw_hazard(); tlb_probe(); @@ -208,7 +219,7 @@ void local_flush_tlb_one(unsigned long page) write_c0_entrylo1(0); if (idx >= 0) { /* Make sure all entries differ. */ - write_c0_entryhi(CKSEG0 + (idx << (PAGE_SHIFT + 1))); + write_c0_entryhi(UNIQUE_ENTRYHI(idx)); mtc0_tlbw_hazard(); tlb_write_indexed(); tlbw_use_hazard(); @@ -238,9 +249,9 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) if (current->active_mm != vma->vm_mm) return; - pid = read_c0_entryhi() & ASID_MASK; - local_irq_save(flags); + + pid = read_c0_entryhi() & ASID_MASK; address &= (PAGE_MASK << 1); write_c0_entryhi(address | pid); pgdp = pgd_offset(vma->vm_mm, address); @@ -260,14 +271,12 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) write_c0_entrylo0(pte_val(*ptep++) >> 6); write_c0_entrylo1(pte_val(*ptep) >> 6); #endif - write_c0_entryhi(address | pid); mtc0_tlbw_hazard(); if (idx < 0) tlb_write_random(); else tlb_write_indexed(); tlbw_use_hazard(); - write_c0_entryhi(pid); local_irq_restore(flags); } diff --git a/arch/mips/mm/tlb-sb1.c b/arch/mips/mm/tlb-sb1.c index 6256cafcf3a2..bba7130e7547 100644 --- a/arch/mips/mm/tlb-sb1.c +++ b/arch/mips/mm/tlb-sb1.c @@ -94,7 +94,7 @@ void local_flush_tlb_all(void) local_irq_save(flags); /* Save old context and create impossible VPN2 value */ - old_ctx = read_c0_entryhi() & ASID_MASK; + old_ctx = read_c0_entryhi(); write_c0_entrylo0(0); write_c0_entrylo1(0); @@ -144,17 +144,17 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { struct mm_struct *mm = vma->vm_mm; - unsigned long flags; - int cpu; + int cpu = smp_processor_id(); - local_irq_save(flags); - cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { + unsigned long flags; int size; + size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; + local_irq_save(flags); if (size <= (current_cpu_data.tlbsize/2)) { - int oldpid = read_c0_entryhi() & ASID_MASK; + int oldpid = read_c0_entryhi(); int newpid = cpu_asid(cpu, mm); start &= (PAGE_MASK << 1); @@ -169,17 +169,17 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); - write_c0_entryhi(UNIQUE_ENTRYHI(idx)); if (idx < 0) continue; + write_c0_entryhi(UNIQUE_ENTRYHI(idx)); tlb_write_indexed(); } write_c0_entryhi(oldpid); } else { drop_mmu_context(mm, cpu); } + local_irq_restore(flags); } - local_irq_restore(flags); } void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) @@ -189,7 +189,6 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; - local_irq_save(flags); if (size <= (current_cpu_data.tlbsize/2)) { int pid = read_c0_entryhi(); @@ -207,9 +206,9 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); - write_c0_entryhi(UNIQUE_ENTRYHI(idx)); if (idx < 0) continue; + write_c0_entryhi(UNIQUE_ENTRYHI(idx)); tlb_write_indexed(); } write_c0_entryhi(pid); @@ -221,15 +220,16 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { - unsigned long flags; int cpu = smp_processor_id(); - local_irq_save(flags); if (cpu_context(cpu, vma->vm_mm) != 0) { + unsigned long flags; int oldpid, newpid, idx; + newpid = cpu_asid(cpu, vma->vm_mm); page &= (PAGE_MASK << 1); - oldpid = read_c0_entryhi() & ASID_MASK; + local_irq_save(flags); + oldpid = read_c0_entryhi(); write_c0_entryhi(page | newpid); tlb_probe(); idx = read_c0_index(); @@ -240,10 +240,11 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) /* Make sure all entries differ. */ write_c0_entryhi(UNIQUE_ENTRYHI(idx)); tlb_write_indexed(); + finish: write_c0_entryhi(oldpid); + local_irq_restore(flags); } - local_irq_restore(flags); } /* @@ -255,18 +256,17 @@ void local_flush_tlb_one(unsigned long page) unsigned long flags; int oldpid, idx; - page &= (PAGE_MASK << 1); - oldpid = read_c0_entryhi() & ASID_MASK; - local_irq_save(flags); + oldpid = read_c0_entryhi(); + page &= (PAGE_MASK << 1); write_c0_entryhi(page); tlb_probe(); idx = read_c0_index(); + write_c0_entrylo0(0); + write_c0_entrylo1(0); if (idx >= 0) { /* Make sure all entries differ. */ write_c0_entryhi(UNIQUE_ENTRYHI(idx)); - write_c0_entrylo0(0); - write_c0_entrylo1(0); tlb_write_indexed(); } @@ -297,6 +297,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte) { unsigned long flags; pgd_t *pgdp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; int idx, pid; @@ -311,19 +312,26 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte) pid = read_c0_entryhi() & ASID_MASK; address &= (PAGE_MASK << 1); - write_c0_entryhi(address | (pid)); + write_c0_entryhi(address | pid); pgdp = pgd_offset(vma->vm_mm, address); tlb_probe(); - pmdp = pmd_offset(pgdp, address); + pudp = pud_offset(pgdp, address); + pmdp = pmd_offset(pudp, address); idx = read_c0_index(); ptep = pte_offset_map(pmdp, address); + +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) + write_c0_entrylo0(ptep->pte_high); + ptep++; + write_c0_entrylo1(ptep->pte_high); +#else write_c0_entrylo0(pte_val(*ptep++) >> 6); write_c0_entrylo1(pte_val(*ptep) >> 6); - if (idx < 0) { +#endif + if (idx < 0) tlb_write_random(); - } else { + else tlb_write_indexed(); - } local_irq_restore(flags); } @@ -336,7 +344,8 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long old_ctx; local_irq_save(flags); - old_ctx = read_c0_entryhi() & 0xff; + /* Save old context and create impossible VPN2 value */ + old_ctx = read_c0_entryhi(); old_pagemask = read_c0_pagemask(); wired = read_c0_wired(); write_c0_wired(wired + 1); -- GitLab From 3b495f2bb749b828499135743b9ddec46e34fda8 Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Mon, 4 Apr 2005 01:06:19 +0000 Subject: [PATCH 0986/1519] Au1100 FB driver uplift for 2.6. Signed-off-by: Ralf Baechle Acked-by: Antonino Daplas --- arch/mips/au1000/common/platform.c | 34 + arch/mips/au1000/common/setup.c | 2 - drivers/video/Makefile | 2 +- drivers/video/au1100fb.c | 971 +++++++++++++------------- drivers/video/au1100fb.h | 614 ++++++++-------- include/asm-mips/mach-au1x00/au1000.h | 7 + 6 files changed, 851 insertions(+), 779 deletions(-) diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 0776b2db5641..3ca3cb8a8a73 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -41,8 +41,42 @@ static struct platform_device au1xxx_usb_ohci_device = { .resource = au1xxx_usb_ohci_resources, }; +/*** AU1100 LCD controller ***/ + +#ifdef CONFIG_FB_AU1100 +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = LCD_PHYS_ADDR, + .end = LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = ~(u32)0; + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; +#endif + + static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_ohci_device, +#ifdef CONFIG_FB_AU1100 + &au1100_lcd_device, +#endif }; int au1xxx_platform_init(void) diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index c1e7d2dcc190..8d21efdf29b7 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -106,8 +106,6 @@ void __init plat_setup(void) /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ #ifdef CONFIG_MIPS_HYDROGEN3 strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor"); -#else - strcat(argptr, " video=au1100fb:panel:s10,nohwcursor"); #endif } #endif diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 1fff29f48ca8..97c5d03ac8d9 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -86,7 +86,7 @@ obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o obj-$(CONFIG_FB_PXA) += pxafb.o obj-$(CONFIG_FB_W100) += w100fb.o -obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o +obj-$(CONFIG_FB_AU1100) += au1100fb.o obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index b6fe30c3ad62..a5129806172f 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -2,6 +2,11 @@ * BRIEF MODULE DESCRIPTION * Au1100 LCD Driver. * + * Rewritten for 2.6 by Embedded Alley Solutions + * , based on submissions by + * Karl Lessard + * + * * Copyright 2002 MontaVista Software * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com @@ -33,298 +38,253 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include #include #include #include #include #include -#include -#include -#include #include #include -#include +#include +#include +#include -#include -#include -#include "au1100fb.h" +#include -#include